The Lumberman's Exchange brought to you by LBXonline.com

June 2014

Since 1986 - The Original (800) 315-9950 or (615) 349-1890

Loggers • Sawmills • Pallet Manufacturers • Wood Recycling Equipment

DealS of the Month '01 Timbco 820D Forwarder

Bevel Buddy™ makes chipping more profitable

Reduced!

Item ID: 13217 Contact: Chris ext. 600

'08 JD 2054 Log Loader

New U/C! Runs Great!

Item ID: 12967 Contact: Tom ext. 604

Cat 518 Cable Skidder

• Reduce knife changes and resharpening costs • Less downtime = more production time = BIGGER PROFITS Item ID: 13333 Contact: Sam ext. 603

For classifieds call (800) 315-9950 or (615) 349-1890 or í With your smart phone: Scan QR Code to visit—

www.LBXonline.com

• Extended life for chipper parts such as bolts, knife holders and clamps • Use less fuel with sharper knives

Bevel Buddy is available at all Authorized Morbark Dealer locations. To find a dealer in your area, go to www.morbark.com/find-a-dealer

Tracy Gordon owner of Gordon LumTracy owner of Gordon LumberingGordon purchased a Log Max 7000XT. bering purchased Log Maxabout 7000XT. We asked Tracy hisathoughts We asked Tracy about his new Log Max:his “I thoughts am looking for

Tracy Gordon owner of Gordon Lum-

his new Log Max:that “I am looking for reason is one

savings and bering purchased a fuel Log Max 7000XT.

fuel is one We asked Tracy his thoughts about and that why savings I, absolutely, wanted a reason Log Max his new Log Max: “I am looking for why I, absolutely,

a Log Max head. I looked atwanted a Log Max 6000 fuel savings and that is one reason head.

I looked at a LogaMax but needed something little6000 bigger why I, absolutely, wanted a Log Max

but needed little bigger head. I looked at a which Log Max is6000 why something I chose thea7000XT. This but needed something a little which is bigger why I

chose thefor 7000XT. head is a good match mixedThis and which is why I chose the 7000XT. This head is a good match for mixed and heavy hardwoods in our area. Everyhead is a good match for mixed and

heavy hardwoods in our area. smoothly and I Everywas

hasEverygone heavy hardwoods inthing our area.

W TollW

thing has gone thing has gone smoothly and I well was treated by

smoothly and I was everyone involved.”

Western Canada treated well by everyone involved.”

Toll Free 1.800.666.4474 From right to left, Dane Caton, operator, Tracy Gordon, treated well by everyone involved.”

From right to left, Dane Caton, operator, Tracy Gordon, owner, and Baker, salesman, of Strong, From right to Gary left, Dane operator, Tracy Maine.

Gordon, owner, and Gary Baker, salesman, ofCaton, Strong, Maine.

Toll

USA

P P

learn more about what Log Max Ph. 360.699.7300 To learn more aboutTo what Log Max owner,Scan and Gary Baker, salesman, of Strong, Maine.

Scan this QR code withthis QR code with your smartphone your smartphone barcode reader Scan app to this QR code with barcode reader app to see a video on ayour Log smartphone see Max 7000XT Fixed a video on a Log barcode reader app to Head processing hard-7000XT Fixed Max see a processing video on a Log woods on a Timber Pro Head hard725 Track Machine Max 7000XT Fixed

woods on a Timber Pro Head processing hard725 Track Machine woods on a Timber Pro 725 Track Machine

To learn more what Log Max can do for you contact your can dolocal for youabout contact your local Eastern Canada Ph.your 506.869.2325 dealer today. can do for you contact local dealer today. dealer today.

www.LogMax.com

www.LogMax.com 2 n

The Original Lumberman’s Exchange

E EP

P

www. www.

Visit us online at www.LBXonline.com!

PALLET STOCK, STUDS, I-JOISTS, STRUCTURAL COMPONENTS THE L-M SAWS, WILL TAKE YOU TO THE NEXT LEVEL! Leading the industry in bundle cross cut systems since 1957!

New Design!

New Technology!

Portable Yard Saw

Model 200MP-7-SS Gas Model 100MP-7-SS Electric 3 inch side shift, a standard feature

Traveling Arch Saw

Hydraulically controlled No manual cutting Our most popular turn key system

The New L-M “I-CUT” Bundle cross cut system!

* 60’ long frame to precision cut your I-Joists * Precision accuracy of +- 1/32” * Shorter system are available to process all your cutting needs * Tremendous labor savings, Guaranteed!

L-M Deck Cut Off Saw 3 foot to 12 foot bar lengths Hydraulically controlled

Automatic Strapping System Attach bottom crossers Side squeeze incorporated Polyester strap

Flush End Bump Rollcase

Reduce or eliminate your end trims

The Verticut P4 System now offers scan and cut technology, reducing operator error by using a bar code system!

Visit our web site www.LMSaws.com to see our complete product line and videos!

L-M Equipment Co. Ltd

Phone: 604-431-8800 Toll Free: 1-800-455-8807 Web Site: www.LMSaws.com E-Mail: Sales@LMSaws.com For Classifieds Call Your LBX REP at 1-800-315-9950

June 2014 n 3

n uctio e d o r anc est P High t Mainten !! s d!

Lowe rantee Gua

Trailer:

Tandem axle, 8’6” wide, 22’-30’ long, 11’8” high, 5-7 tons, Electric brakes.

Saw:

Superior Carbide Slasher - Cut wood instead of sharpen chains 36” to 60” diameter, 2 ga Carbide Slasher.

Engine:

50 to170 HP or PTO Drive with user’s tractor.

Hydraulics:

Commercial Shearing

Splitter:

35 - 72 tons, 3-5 second cycle time; 2, 4, 6, 8, 10, 12, 14 & 21 way pkg wedge.

Capacity - 4” to 27” Log diameter 0” to 48” Block Length Lifetime warranty on the entire splitter chamber.

Infeed Conveyor:

16” - 30” long Hydraulic powered.

Clean out Hopper: Get rid of bark and wood slivers before being conveyed away.

New Grapple System Now Available!

2040 Rogers Road, Perth, O n ta r i o K 7 H 1 P 9 Canada

www.cord-master.com Email: cordking@cord-master.com

Today!

888-219-9663 4 n

The Original Lumberman’s Exchange

Visit us online at www.LBXonline.com!

The

** Auctions **

Original

Lumberman’s Exchange Your #1 Source for Forest Industry Products!

The Lumberman’s Exchange is published monthly and is circulated internationally to sawmills, loggers, pallet makers, recyclers and industrial woodworking plants.

Publisher Woods Publishing Advertising Sales Morris Woods (615) 349-1890 morris@LBXonline.com Design Director Heninger & Associates lbxonline@comcast.net

Charleston Auctions — Page 9

www.CharlestonAuctions.com

Stock Building Supply-UTah Forest Products Machinery & Equipment Exposition June 12 • 9 am (MDT)

Online Auction Only Coming...

June 10-12, 2015

Your Show Your Business Your Success

** Calendar ** Atlanta’s Georgia World Congress Center

Expo 2015 is your first-class marketplace to reach a quality audience of top management and purchasing executives from around the globe. Every two years, the wood products industry comes here to showcase state-of-the-art equipment, technology and services.

Forest ProductsProducts Machinery & Equipment Exposition Forest Machinery & Equipment Exposition

Your Show Atlanta's Georgia World Congress Center Your Business Atlanta’s Georgia World Congress Center See page 39 for details Your Success Expo 2015 is your first-class marketplace to reach a quality audience of top Mark your

Sign up today for prime exhibit space at the industry’s premier event.

Coming...

Coming June 10–12, 2015 June 10-12, 2015

Complete show facts at SFPAexpo.com

Contact Eric Gee • egee@sfpa.org

management and purchasing executives from around the globe. Every two years, the wood products industry SFPAexpo.com comes here to showcase state-of-the-art equipment, technology and services.

Calendar for 2015

** INFO LINK **

Sign up today for prime exhibit space at the industry’s premier event.

Complete show facts at SFPAexpo.com

Equipment Reps Equipment Representative Tom Hirt (800) 315-9950 x604

ACE............................................. 30 Amark......................................... 13

M&F Gauge................................. 29

Equipment Representative Sam Wall (800) 315-9950 x603

B & B Mfg................................... 16

Menominee Saw........................ 19

B. H. Payne................................... 9

Midwest Sharpening Service... 26

Baker........................................ 7, 9

Morbark....................................... 1

Bartlett Saw Service........... 17, 33

Multitek...................................... 12

Blockbuster............................... 10

Phase-a-Matic............................ 34

Buck Equipment (AIM) . .......... 22

Piper’s Saw Shop....................... 11

Built-Rite.................................... 30

Precision Sharpening............... 23

Charleston Auctions................... 9

Press Releases........................ 38

Cleereman.................................. 31

Resource Recovery................... 20

Connecticut Boot........................ 6

Rotochopper........................... 32

Cord Master................................. 4

Row Electric.............................. 14

Corley Mfg.................................. 27

Sawmill Exchange..................... 10

CRD Metalworks.......................... 8

Sering Sawmill........................... 37

CW Mill................................... 9, 15

Southern Forest EXPO........... 39

Hahn........................................... 35

Timberwolf................................ 32

Kasco-Sharp Tech..................... 13

Universal Refiner...................... 36

Kilgore Saw................................ 21

U.S. Blades................................. 18

Lignomat.................................... 24

Vista Machines.......................... 34

LM Equipment, Canada.............. 3

Weaver Electric......................... 25

Mailing Address P.O. Box 1916 Columbia, TN 38402-1916 (615) 349-1890 Phone (931) 233-0802 Fax Ad Submissions May be sent to— LBXonline@comcast.net Postmaster Send address changes to: Lumberman’s Exchange P.O. Box 1916 Columbia, TN 38402 The Original Lumberman’s Exchange is published monthly

by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers the Lumberman’s Exchange, its principles and associates are not held liable for errors or omissions. Reproduction in whole or part prohibited without written consent.

Contact Eric Gee • egee@sfpa.org

LogMax......................................... 2 SFPAexpo.com

©2014 by Woods Publishing.

For Classifieds Call Your LBX REP at 1-800-315-9950

For Classifieds Call 800.315.9950 See pictures, prices, and Location of all equipment at www.LBXonline.com BAGGER 2011 Real Tuff Baler, Forage box & Conveyor - powered by a 36-hp Yenmar with conveyor.

Up to 60 square bales an hour! Is in mint condition!

- Item ID-12795 - Chris 800.315.9950 x600

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) Cardinal Carriage line it includes carriage with onboard log turners, carriage drive, hyd pac for carriage, sawyers cab, computer controls, cabinet with electronic drives for carriage knees, husk including 48” bottom saw and 36” top saw (2 spare 48” blades and 1 spare 36” blade), short pop-up transfer to edger, belted rollcase to clear slabs and cuts from sawline, log stop and loader to drop logs onto carriage, heavy duty log turner under log stop and loader to deal with big logs onto carriage and track and frame. Significant new spare parts to be negotiated separately.

- Item ID-13198 - Sam 800.315.9950 x603 Manual Four Head Block - Mounted on all steel carriage. Husk. Manual Pulleys on Bearing . Parts Book and where to order included. - Item ID-12846 Tom 800.315.9950 x604

CHIPPERS

Precision 58 Chip Pac - single chute loading system - Item ID-12764 Sam 800.315.9950 x603 June 2014 n 5

Email

State

Zip

❑ Please Remove

Call us today for all your used equipment needs!

free equipment listings! Call – (800) 315-9950

DealS for the Month -May'01 Timbco 820D Forwarder

Item ID: 13217 Contact: Chris ext. 600

Fax

City

❑ Please Change

'06 Peterbuilt Log Truck Chris Woods, Owner Phone: 800-315-9950 Ext. 600 Super Clean Truck!

Item ID: 13018 Contact: Tom ext. 604

Phone

Address

Individual Name

Company Name*

❑ Please Add

Equipment Representatives

6 n

*Company name and address required to process your change.

✁

P.O. Box 1916 Columbia, TN 38402

The Original Lumberman’s Exchange

If you need to Change your Address or Add Your Name to our mailing list, then please complete this form and mail to:

‘95 JD 693D Crawler Buncher

Tom Hirt Phone: 800-315-9950 Ext. 604

Item ID: 13206 Contact: Sam ext. 603

For classifieds call (800) 315-9950 or (615) 349-1890 or

í

With your smart phone: Scan QR Code to visit—

www.LBXonline.com Sam Wall Phone: 800-315-9950 Ext. 603

The Original Lumberman’s Exchange

2006 Morbark 18 Hurricane Chipper w/Loader - Good running portable chipper equipped with loader. JD

Workboots

Best Prices in the USA

Call with model number, size, and width for a FREE Price Quote!

(888) 438-5411 6068 engine with 250HP. Hydraulic swivel Discharge Chute; Tandem axle package, Hydraulic rear stabilizer, large hydraulic tank, loader platform with chair, loader. The chipper has been recently serviced by a certified Morbark dealer who installed new blades and anvils. The machine also has 2 new tires. - Item ID-12964 - Tom 800.315.9950 x604 2007 Morbark 22 RXL 1000HP Chipper - 8000 hrs.

Cummins 1000 HP Engine runs strong. Just replaced feed tray, end spout, belly liners, hood liners, and one pump. Machine overall is in very good condition.

S/N 2043. DISCHARGE SYSTEM: Dirt separator with deflector Hydraulic swivel/telescoping discharge spout. CHIPPER: 22” diameter chipping capacity, 75” diameter four-knife chipper disc with Left Hand rotation Chip sizes: 5/8”, 3/4”, 7/8”, 1”, 1-1/4”, 2”. Hydraulic chipper hood for easy knife access. 30 ft. x 10 ft CAT chain infeed bed.

Enclosed weatherized operators’ cab is mounted on rubber shock absorbers with combination air conditioner/heater. Tilts hydraulically for transport.

Six-way adjustable seat and joystick controls. Morbark

Visit us online at www.LBXonline.com!

1000 knuckle boom loader, 25 ft reach, 210 degree swing. By-pass grapple. Lift capacity of 20,000 lbs. at 10 ft. OPTIONS: reversing fan, twin disc clutch; Electronic RPM sensor with automatic back feed; 11 hp Quincy air compressor; Pre lube on engine while starting. - Item ID-12449 Tom 800.315.9950 x604 2008 Dynamic 585 Cone Head Chipper - S/N 5019.

John Deere 500 HP engine.

Only 861 hours. New knives and anvils. Wear liners, discharge chute, fan blades on drum have all been updated and replaced approximately 200 hours ago. Hand held remote control. Triple chain feed deck. Produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and

produce 6 - 8 loads per day. - Item ID-12694 - Tom 800.315.9950 x604

COMPLETE SAWMILLS

Complete 3 head block Helle Sawmill - 100hp electric motor, run by Omen Cummins Generator set, Two stand automatic Log Deck, 3 saw Cedar Creek Vertical Edger, complete cost $12000.

Palllet Board resaw system, 2 roto phase Go Fast Deduster 2 head Go Fast Resaw with complete automatic run around system. Omen Cummings Generator New Condition, Green Chain Round Table, Manual Chop saw, rotating board stacker, all under roof. Excellent Condition.

Thomas Ind. Computer Set Works Cost $10000. Saw Dust Conveyer, saw dust box, 2- 56 inch inserted

‘77 FMC 220CA Skidder w/ Swing Grapple

Item ID: 13227 Contact: Tom Ph: 800-315-9950 x604

Prentice 210D Knuckleboom Item ID: 12914 Contact: Sam Ph: 800-315-9950 x603

www.LBXonline.com

www.LBXonline.com

Tooth Saws, 2 Roto Phases, 3 Phase 480 Electric Boxes complete cost over $10,000. Will include 20’ of 2 strand kant Green Chain.

- Item ID-13122 - Tom 800.315.9950 x604 Forest-All Mill - Forest-All Sawmill, circle saw - Item ID-12762 - Sam 800.315.9950 x603

Mellott 3 Strand Lumber) Conveyors Decks (Log - (2) Mellott log decks, 3 strand, (1)22’ 6” long, 51 3/4” high (1)27’ long, 74” high $7500.00 ea. - Item ID-13200 - Sam 800.315.9950 x603 Hill Top 4 Strand Lumber) Conveyors Decks (Log - Hill Top lumber transfer deck, 37’ long, 4 strand roof top chain, New gearbox drive - Item ID-13199 - Sam

For Classifieds Call Your LBX REP at 1-800-315-9950

CONVEYORS

June 2014 n 7

There's Only One Way to Make Money in the Firewood Business…Production!

There’s Only One Way to Make Money in the Our Vision for Your Success is 20/20 Firewood Business….

Production!

The Results are in YOur from the Great Firewood Shootout…

Our VisiOn FOr success is 20/20

Our Rapido Loco and shootout...

Woodbine Pro 20 The results Are in From the Great 20 Firewood Our rapidoDominated Loco 20 and Woodbine Pro 20Competition!

DOMinATeD The cOMPeTiTiOn! the de A Ma e US th in

Woodbine Rapido Loco 20 Features Woodbine Rapido Loco 20 - 50” Simonds Circular Slasher Blade Features: - 73 HP Deutz Diesel • 50" Simonds Slasher - Tandem Axle DOTCircular Approved TrailerBlade • 73 HP Deutz Diesel - 24’ Conveyor STANDARD • Tandem Axle DOT Approved Trailer - 13’ Powered Infeed STANDARD • 24' Conveyor Standard - 8• Way Splitting Wedge 13' Powered Infeed Standard - 20” Log Diameter • 8-way SplittingCapacity Wedge - Push-Button Splitting System • 20" Log Diameter Capacity • Push-button Splitting System

At $54,900 Ready To Produce, At this is$54,900 the Fastest Ready to Produce, this is Production Firewood The FastestinProduction Processor North Firewood Processor in America.* North America.*

Woodbine Pro 20 Woodbine Pro 20 Features

- Oregon .404 Harvester components Features: - Tandem Axle DOT Approved Trailer • Oregon .404 Harvester Components - UpgRADeD 60 HP Deutz Diesel for more power!

• Tandem Axle DOT Approved Trailer - 24’ Conveyor STANDARD • Upgraded 60 HP Deutz Diesel for More Power!

At $44,900 the - 13’ Powered Infeed STANDARD • 24' Conveyor Standard Woodbind Pro 20 leads 13' Powered Infeed Standard - 8• Way Splitting Wedge At $44,900 its class in PRICE, • 8-Way SplittingCapacity Wedge - 20” Log Diameter the Woodbine Pro 20 PRODUCTIVITY and • 20" Log Diameter Capacity leads its class in Price, - Push-Button Splitting System PROFITABILITY* • Push-button System Productivity and - Our Most PopularSplitting Chain Saw Machine • Our Most Popular Chain Saw Machine Profitability*

remember HindsigHt is 20/20

Remember: Hindsight is 20/20

sO BeFOre YOu BuY cOMPAre eiTher OF The Soseries Before You Buy, compare either of the 20 PrOcessOrs FrOM crD MeTALWOrks TO AnYProcessors BrAnD - AnY siZe - AnYWhere.

20 Series from CRD Metalworks to Any Brand, Any Size, Anywhere check them out at the

Family Owned – Family Operated – Factory Direct

Family Owned—Family Operated—Factory Direct

*As Seen In Sawmill & Woodlot Magazine 8 n

The Original Lumberman’s Exchange

Call 888-667-8580

Sawmill & Woodlot www.crdmetalworks.com *As seen in

magazine.

Visit us online at www.LBXonline.com!

ONSITE W/W/ SIMULTANEOUS WEBCAST ONSITE SIMULTANEOUS WEBCAST

AU IN AU TIO IOO AU AU CCTCCTIT O NNN

ONSITE ONSITE W/ SIMULTANEOUS W/ SIMULTANEOUS WEBCAST WEBCAST FIRST FIRSTCLASS CLASSPRSRT PRSRT UPCOMING AUCTIONS FIRST FIRSTCLASS CLASSPRSRT PRSRT UPCOMING AUCTIONS FIRST CLASS FIRST FIRST CLASSPRSRT PRSRT FIRSTCLASS CLASSPRSRT PRSRT US USPOSTAGE POSTAGE UPCOMING UPCOMING AUCTIONS AUCTIONS USPOSTAGE POSTAGE USPOSTAGE POSTAGE USPOSTAGE POSTAGE US US Bae, iN PAID US PAID Bae, iN JulY 2014

Bae, iN JulY 2014

Bae, iN JulY 2014 JulY 2014

PAID PAID FORTWAYNE, WAYNE,IN IN FORT PERMIT ##650 650 PERMIT ge ligHtiNg FacilitY, RaveNNa, oH

PAID PAID PAID FORTWAYNE, WAYNE,IN INPAID FORT FORT WAYNE,IN IN FORTWAYNE, WAYNE,IN IN PERMIT FORT PERMIT ##FORT 650 WAYNE, 650 PERMIT ##650 650 PERMIT PERMIT ##650 650 PERMIT

When You Buy Your Circular Saws From B.H. Payne You’ve Bought the best... We Guarantee It! Complete Liquidation of: of: Complete Liquidation Complete Liquidation Complete Liquidation of: of: 433 council drive, Fort wayne, iN 46825 ligHtiNgoH FacilitY, RaveNNa, oH council drive, Fort wayne,ge iNligHtiNg 46825 FacilitY, geRaveNNa, ligHtiNg oH FacilitY, RaveNNa, SuMMeRge 2014 433 council drive, 433Fort council wayne, drive, iN433 46825 Fort wayne, iN 46825 SuMMeR 2014 SuMMeR 2014

SuMMeR 2014 ge ligHtiNg FacilitY, waRReN, oH ligHtiNg ge ligHtiNg FacilitY, gewaRReN, ligHtiNgoH FacilitY, waRReN, oHFacilitY, waRReN, oH SuMMeRge 2014 SuMMeR 2014 SuMMeR 2014 SuMMeR 2014 Regal Beloit, SpRiNgField, Mo Regal Beloit, SpRiNgField, Mo Regal Beloit, SpRiNgField, Regal Beloit, Mo Fall SpRiNgField, Mo 2014 Fall 2014 Fall 2014 Fall 2014

etate Brueggemann Lumber Brueggemann Lumber Check our our website at at eggemann Lumber Lumber Check d Check ourCheck website ourat website atwebsite So Sale Location: ldBrueggemann www.charlestonauctions.com ocation:Sale Location:Sale Location: www.charlestonauctions.com www.charlestonauctions.com www.charlestonauctions.com 7147 Ricker Rd, New Haven iN Traditional Quality Combined 7147 00 for auctions updated daily!!

7 Ricker Rd, 7147 New Ricker Haven Rd, iN NewRicker HavenRd, iN New Haven iN for auctionsdaily!! updated daily!!

Sale date and for auctions for updated auctions daily!! updated dateTime: and Time: ate andSale Time: date and Sale Time: Saturday, May 10th at 9 aM n) Saturday, 10th at (edt) 9 aM (edt) rday, May Saturday, 10th at 9May aM (edt) 10th at 9 May aM (edt) With Todays Technology

With Todays Technology

Preview Inspection: Preview Inspection: ew Inspection: Preview Inspection: Friday, May 9th from 9from aM -9 5aM pM (edt) Quality Brand ay, May 9th Friday, from 9May aM9th - 5Friday, from pM (edt) 9May aM -9th 5 pM (edt) - 5 pM (edt) Reg. U.S. Pat Off

STOCK BUILDING SUPPLY-UT

Complete Liquidation Complete Liquidation Complete Complete Liquidation Liquidation of: of: of:of:

Brueggemann Lumber Brueggemann Lumber Brueggemann Brueggemann Lumber Lumber ONLINE AUCTION ONLY

SALE dATE: 10TH AT 9:00 AM Sale Date & SATURdAy, Time: 06/12/2014 at 9:00am (MDT) SALE dATE: SATURdAy, MAy 10TH AT 9:00 AM SALE dATE: SALE dATE: SATURdAy, SATURdAy, MAy 10TH MAyMAy 10TH AT 9:00 AT AM 9:00 AM Call 800 752-0627 Make Sure To Ask For Our Free, Complete Saw Catalog

MAY Circular Saws MAY MAY MAY SUN MON TUE WED THU FRI

PREVIEW INSPECTION: Friday, May 9th from 9:00 aM aM - pM 5:00 pM pM Preview Inspection: Wed., June 10 from 9:00am-5:00pm (MDT) PREVIEW INSPECTION: Friday, May 9th from 9:00 - 5:00 PREVIEW PREVIEW INSPECTION: INSPECTION: Friday, May Friday, 9th May from 9th 9:00 from aM 9:00 - 5:00 aM pM - 5:00 locatioN: 7147 Ricker Rd, New Haven iN Sale Location: 145 South Geneva Road, Lindon, UT 84042 locatioN: 7147 Ricker Rd, NewiN Haven iN locatioN: locatioN: 7147 Ricker 7147 Rd, Ricker NewRd, Haven NewiN Haven We Manufacture & Sell Inserted Tooth Headsaws, Solid Tooth

SUN MON TUE WEDSAT THU Nugent MONNugent TUE SUN WED MON THU TUE FRI WED SAT THU FRI Saw Bits and Shanks Dave 1 2 1 Circular 2 3Knives 1 2 31 9 4 5 6 7 8 5 6 4 7 5 8 6 4 97 5108 6 9 7 108 Tipped 11 Carbide 12 12 13 14Saws 15 16 12 13 11 14 12 15 131116 14 17 1513 1614 1715 ® Saws 18Carbide 19 Strobe 20 20 21 22 23 19 20 18 21 19 22 201823 211924 22 2321 2422 25 25 26 26 27& Company 28 29 30 26 27 25 28 26 B.H. 29 27 Payne 30 28 31 2927 3028 3129

Saw Manufacturers

SAT FRI

SAT

23 3 10 9 10 17 16 17 24 24 23 31 31 30

Saws, Inserted Tooth Cutoff Saws & Carbide Saws. We also Stock & Sell Bits & Shanks, Carbide Tips, Diamond Wheels, Knife Grinding Wheels, Saw Gumming Wheels & Knives.

preview inspection preview inspectionpreview inspection preview inspection Sale date Removal dates Sale date Removal dates Sale date Removal dates Removal dates

ale date

Here’s What You Get With Every B.H. Payne Saw www.cHaRleStoNauctioNS.coM www.cHaRleStoNauctioNS.coM www.cHaRleStoNauctioNS.coM www.cHaRleStoNauctioNS.coM • Saws manufactured from only the Highest Quality Nickel Alloy Steel.

• Each Saw Milled with State-Of-The-Art Precision CNC Milling Machine.

• We Tension Your Saw to Your RPM Speed BEFORE Leaving Our Factory.

• Your Satisfaction - Completely Guaranteed.

AUC IN AUC T IOO AUC AUC TTIT O IO NNN

(2) BoBcat Skid SteeRS lRg QtY oF oSB aNd plYwood lRg vaRietY/dewalt & vaRiouS BRaNd poweR toolS (2) BoBcat Skid SteeRS lRg QtY oF oSB lRg aNd vaRietY/dewalt plYwood vaRietY/dewalt & vaRiouS (2) BoBcat Skid SteeRS (2) BoBcat Skid SteeRS lRg QtY oF oSB aNd lRgplYwood QtY oF oSB aNd plYwood lRg & vaRietY/dewalt vaRiouS BRaNdlRg poweR & vaRiouS toolS BRaNd poweR toolSBRaNd poweR toolS

HU HUGHUHGUEGDate UACEUTCITime:E AUC GAEUCARemoval OTI TION...TOIand Wednesday ...Over ...Over v..O .eOrNv7e5r NON 16–20 075 75 l7o5June t0l !!ts!! 0 lots!! l0ots!8:00am-5:00pm ! so(MDT)

Sale date and Time: Saturday, May 10th at 9 aM Complete Liquidation of: of: date andatTime: Saturday, 10th at (edt) 9 aM (edt) Complete Liquidation Sale date andSale Time: date Saturday, and Sale Time: May Saturday, 10th 9May aM (edt) 10th 9 May aM (edt) Complete Liquidation Complete Liquidation of: of: Preview Inspection: Friday, Mayat 9th from 9 aM - 5 pM (edt)

Brueggemann Lumber Brueggemann Lumber ueggemann Brueggemann Lumber Lumber

Preview Inspection: from 9 aM - 5 pM (edt) Preview Inspection: PreviewFriday, Inspection: May 9th Friday, from aM9th - 5Friday, from pMNew (edt) 9May aM -9th 5 pM Sale Location: 7147 9May Ricker Rd, Haven iN (edt) Sale Location: 7147 Sale Location:Sale 7147 Location: Ricker Rd, 7147 New Ricker Haven Rd, iN NewRicker HavenRd, iN New Haven iN

SALE dATE: SATURdAy, MAy 10TH AT AT 9:00 AMAM B.H. Payne & Company, Inc. SALE dATE: SATURdAy, MAy 10TH E® dATE: SALE SATURdAy, dATE: SATURdAy, MAy 10TH MAyAT 10TH 9:00 AT AM 9:00 AM9:00 ® m

r.com

his

pepto step

om s.com

P.O. Box 90608 East Point, GA 30364 404 761-8711 Fax 404 761-5398

2004 gMc c8500 Flat Bed 2004 gMc c8500 Flat Bed 2004 gMc c8500 Flat 2004Bed gMc c8500 Flat Bed

® ® ® ® BidSpotter.com BidSpotter.com BidSpotter.com BidSpotter.com

koMatSu 4000lB FoRktRuck koMatSu 4000lB FoRktRuck koMatSu 4000lB FoRktRuck koMatSu 4000lB FoRktRuck

“Since 1890”

433 Council drive, Fort Fort Wayne, Indiana 46825 Council drive, Wayne, Indiana 46825 433 Council433 drive, Council Fort 433 Wayne, drive, Fort Indiana Wayne, 46825 Indiana 46825

Call:Call: 877-357-8124 • 260-373-0850 • Fax: 260-373-0854 877-357-8124 • 260-373-0850 • Fax: 260-373-0854 Call: 877-357-8124 Call: 877-357-8124 • 260-373-0850 • 260-373-0850 • Fax: 260-373-0854 • Fax: 260-373-0854 www.CharlestonAuctions.com www.CharlestonAuctions.com www.CharlestonAuctions.com www.CharlestonAuctions.com IN Auction License #AC68900001

1999 cHevY 2500 pick up tRuck MoFFett tRuck MouNt FoRk tRuck MMd aiRMNaN coMpReSSoR 1999 MoFFett FoRk tRuck MMd aiRMNaN coMpReSSoR evY 2500 pick 1999up cHevY tRuck 2500 pick upcHevY tRuck2500 pick up tRuck MoFFett tRuck MouNt MoFFett FoRk tRuck tRuck MouNt FoRktRuck tRuckMouNt MMd aiRMNaN coMpReSSoR MMd aiRMNaN coMpReSSoR

E-mail: info@paynesaws.com

2007 cHevY SileRado pick up 2007 cHevY 2007 cHevY SileRado 2007pick cHevY up SileRado pick up SileRado pick up

IN Auction License #AC68900001 IN Auction License #AC68900001 IN Auction License #AC68900001

Web Site: www.paynesaws.com

800.315.9950 x603

DEBARKERS

Morbark C-16 Debarkers 75 HP Motor, 24’ Outfeed Hourglass Rolls - Item ID13193 - Sam 800.315.9950 x603

EDGERS & GANGS

Cornell 636 edger - with dual tailers, 5 hp hydraulic pack for set works. Good condition - Item ID-13239 Chris 800.315.9950 x600

FIREWOOD PROCESSORS

Best Value Portable Log Splitter - Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value!

PA - Item ID-12062 - Tom

Morbark 1200 Tub Grinder Item ID: 12919 Contact: Sam Ph: 800-315-9950 x603

‘93 Cat 518C Cable Skidder

Item ID: 13288 Contact: Tom Ph: 800-315-9950 x604

www.LBXonline.com

www.LBXonline.com

800.315.9950 x604 Chomper Firewood Processor - 60HP John Deere engine. Two chain hydraulic powered conveyor. Very good running condition. Can produce up to 2 cords/ hour according to owner.

Priced to sell. - Item ID12792 - Tom 800.315.9950 x604 Custom Firewood

Processor - Easily cuts 3+ chord an hour. Fold in deck, conveyer on wheels, 24” capacity!! Very clean running machine. - Item ID13108 - Sam 800.315.9950 x603 ‘06 Cord King Model 60 Wood Processor for SALE. 60” circular saw, 26” log capacity, 30’ Discharge Conveyor, Clean out tumbler, 15 YD saw dust discharge dumpster, 3

For Classifieds Call Your LBX REP at 1-800-315-9950

Different Size Wedges, extra teeth, 4 Cylinder CAT Motor, Heated cab.

Runs daily. - Item ID-13256 Chris 800.315.9950 x600 ‘08 Cord King - Model #44 refurbished and completely gone thru by Cord King in ‘08 Machine it has a 24’ outfeed conveyor.

Machine is in Excellent condition! - Item ID-13167 Chris 800.315.9950 x600 June 2014 n 9

Sawmill Exchange North America's Largest Source of Used Portable Sawmills.

Over 800 Ads:

Portable Sawmills, Commercial Sawmills, Pallet and Cutstock Manufacturing, Firewood Manufacturing, Chipping and Grinding, Trimmers, Debarkers, Dry Kilns, Edgers, Resaws, Ripsaws and Gang Saws, Loaders, Moulders and Planers, Sawdust Blowers and Chains, Conveyors/Transfers/Decks/Green Chain, Rolling Stock, and Much More!!

‘01 Volvo Truck Item ID: 13308 Contact: Sam Ph: 800-315-9950 x603

www.LBXonline.com

The Place to Sell Your Equipment ‘11 Cat 519 Log Loader

Call Us for a Free List of Over 800 Ads or to Sell Your Equipment.

800-459-2148 (

)

US & Canada

www.sawmillexchange.com

Item ID: 13305 Contact: Tom Ph: 800-315-9950 x604

www.LBXonline.com

P.O. Box 710930 • Houston, TX 77271

HOGS/WOODGRINDERS Over 26 years in Business

DVDs Available

We Now Have

8 (8 Models)

12', 20' and 30'

10 n

The Original Lumberman’s Exchange

Models to Choose From

West Salem Grinder and Gen Set - Model WSM 2822, With a Cutler Hammer Soft start. There is also a full set of extra hammers that go with it plus one original from factory to use as a pattern when rebuilding the others with hard surfacing. The gen set is a 360 KW with a Big Cam 855 Cummins engine.

Extremely low 670 Hours.

Owner is negotiable. - Item ID-12386 - Sam 800.315.9950 x603

Logging Equipment

1989 Ford L-9000 w 2005 Prentice 120E - Very clean Truck with newer 2005 Prentice 120E loader with 25’ extend-a-boom.

Has new battery; 350 HP Cummins engine with only 250,000 miles; 3 stage Jake; New Tires!; New seals; Just

‘11 Morbark 5500 Flail Delimber Item ID: 13322 Contact: Tom Ph: 800-315-9950 x604

www.LBXonline.com had brakes done. - Item ID12736 - Tom 800.315.9950 x604 1969 Timberjack 225D skidder - ring chains front ice chains rear, very good condition!! - Item ID-13215 Sam 800.315.9950 x603 1976 Clark 664 Cable Skidder - Approximately 7500 hours. S/N 514F-2341CAC. Strong Clark Winch; Tire chains; Pulls good.

Front tires at 70%. Rears at 30%. Detroit 3-53 runs well.

Center pin tight. Slight play in steering pin. Straight metal. Weighs about 18,000 lbs. Can haul on 10 ton trailer. - Item ID-12249 Tom 800.315.9950 x604 1977 (est) FMC 220CA Tracked Skidder - Good running unit. Detroit 6V53 cranks and runs well.

Military style tracks at 70%. Fixed ESCO Grapple and working Winch. Front Blade. - Item ID-13226 Tom 800.315.9950 x604 1977 (est) FMC 220CA Tracked Skidder w/Swing Boom Grapple - 1977 (est) FMC 220CA Tracked Skidder w/ESCO Swing Boom Grapple. Good running condition. Front blade. Detroit 6V53 engine.

No winch....they cannot fit with swing boom grapple.

Military style tracks at 70%. - Item ID-13227 - Tom

Visit us online at www.LBXonline.com!

PIPER’S Saw Shop ‘88 Cat D5 TSK w/Grapple Item ID: 13298 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

5 7 0 6 • 5 4 8 • 800 Promotional Pricing Offer

Simonds Red Streak Hard Back 1-1/4” x .042 x 3/4” or 7/8” Length 13’2”

$14.71 $14.27 each ‘05 Kenworth T-800 w/Rotobec MT27 Loader

Tell us you saw it here!

L im it e d T im e O n ly

Item ID: 12612 Contact: Sam Ph: 800-315-9950 x603

www.LBXonline.com

800.315.9950 x604 1978 Clark 666 Grapple Skidder - Strong skidder.

Esco 26 grapple with winch. 28L x 26 tires at 60%. Open ROPS cab.

Stick Steering. Detroit 4-53 engine. Runs good.

- Item ID-12325 - Tom 800.315.9950 x604 1978 (est.) FMC Model 220 Track Skidder - Engine and transmission have very few hours since they were reconditioned. Owner reports that about half the tracks need to be re-pinned and bushed, and sprockets and torsion bar need to be replaced. - Item ID-13126 Tom 800.315.9950 x604 1979 Timberjack 230 Forwarder - Good running forwarder with 80% rubber.

Open cab. Detroit engine.

Simple but hard working

machine. Very clean for its’ age. Hard to find. - Item ID13057 - Tom 800.315.9950 x604 1981 Cat D7G w/Rippers - Only 6500 hours on this limited used machine.

Owner reports that it has new alternator and has been gone through completely. No leaks.

Can pull the twin rippers through ANYTHING! Real powerful machine without all the electronic gizmos of new units. - Item ID-13222 -

Tom 800.315.9950 x604 1981 Hydro Ax 411B w/ Koehring 16” Hot Saw - Strong Cummins 6BT 150HP engine with no blow by. 23.1 x 26 tires at 75%.

Koehring Hot Saw has fresh teeth and runs well.

Very nice machine for the price. - Item ID-12538 - Tom 800.315.9950 x604 1981 JD 850 Grapple Dozer - 10,400 hours. Tracks @ 50 percent; 72” Esco grapple; Runs well; Some slack in blade; Everything works.

For Classifieds Call Your LBX REP at 1-800-315-9950

- Item ID-13149 - Tom 800.315.9950 x604 1984 Caterpillar 518 Skidder - long frame line skidder, Has Goodyear 23.1 X 26 tires that all match, about 50 percent tread. This is a very good skidder! - Item ID-13180 Sam 800.315.9950 x603 1989 JD 540-D Cable Skidder - Original owner; Hour meter shows 5800 hours. Serial number: 554925. 23.1X26: Tires; 20% Remaining tread. New(not June 2014 n 11

P.O. Box 170 • Prentice WI 54556-0170 • 800-243-5438

www.multitekinc.com • sales@multitekinc.com

Multitek Firewood Processors Increase Your Productivity and Profitability • Quality Equipment to Reduce your Labor Costs • Circular Saw or Bar & Chain Models • 7 Models to Choose From • Production Ratings up to 5.5 Full Cords Per Hour

Made in the U.S.A.

‘01 Mack Truck Item ID: 13307 Contact: Sam 800.315.9950 x603

www.LBXonline.com rebuilt) John Deere engine w/900 hours. No smoke or noise. Runs strong. On one of the coldest days of the year, the tractor started with only 1 turn of the switch Sheet metal is very good. Pins and bushings average to good condition.

Good dozer blade with good pins and bushings.

- Item ID-13146 - Tom 800.315.9950 x604 1989 JD 640D Grapple 12 n

‘93 Bell Ultra T Tracked FB

Item ID: 13286 Contact: Tom Ph: 800-315-9950 x604

www.LBXonline.com Skidder - turbo with EZ Grapple. S/n W640DC507211 28L-26 tires 3@35% 1@85%. Runs good.

Needs seat recovered and front U-Joint. Priced to sell! - Item ID-12676 - Tom 800.315.9950 x604 1989 JOHN DEERE 648D 30.5 tires around 40%. We have another 648 D for parts that will go with it.

Machine runs, but needs a

The Original Lumberman’s Exchange

little TLC. - Item ID-13220 Sam 800.315.9950 x603 1989 Timberjack 380 Grapple Skidder - 1989 Timberjack 380 Grapple Skidder. Serial # 385267.

Almost new grapple.

Engine has been replaced.

Transmission just rebuilt.

28L tires. Center pins and bushings show medium wear. Good for a year moving 2-3 loads per day. - Item ID-13143 - Tom 800.315.9950 x604 1990 Clark 667 Grapple Skidder - 500 GALLON WATER TANK - SERIAL # 560HC01017, 500 HOURS ON REBUILT CUMMINS ENGINE. Approx 11,000 on machine. Light package.

30.5 tires at 30% with chains. Runs well. Huge water tank could help in fire fighting applications.

- Item ID-13224 - Tom

800.315.9950 x604 1991 Barko 160 Articulated Carrier - Good running machine with about 9,000 hours. Mounted on Rough Terrain 4 wheel drive carrier that can pull a trailer and work in sloppy conditions. Great value for a loader on a carrier like this! - Item ID-12931 - Tom 800.315.9950 x604 1991 John Deere 640D Skidder - 23.1 x 26 Tires 50%, $27,500, Rebuilt Trans.,Good Tight Machine - Item ID-13191 - Sam 800.315.9950 x603 1993 Timberjack 380B Tree Trimmer - s/n CM4478, 5,152 hours, Delivered New in 1995, Cab with A/C, 5 blades, 75 reach, Branton Winch, Push Blade, 4X4, Firestone 67X34.00/26 tires @ 90%, Counter Weight, 6 cylinder Cummins Diesel

Visit us online at www.LBXonline.com!

THE BEST - FOR LESS! The Lumber Industry's Best Extruded Marker!

Come for Better Markers - Stay for Superior Quality, Price & Service

FREE

SAMPLES!

SHOP ONLINE

FLUORESCENT LUMBER

MARKERS

To Order visit the NEW WWW.AMARKERS.COM or Call 866-66AMARK

sales@amarkers.com • Fax:503-663-2850 PO Box 1524 Boring, OR 97009

Recycle our stubs .30¢ Other wax stubs .50¢

‘07 Prentice 2210 w/Slasher Item ID: 13292 Contact: Tom 800.315.9950 Ext. 604

www.LBXonline.com

Engine. FOB:Okeechobee, FL - Item ID-13090 - Tom 800.315.9950 x604 1994 Barko 160B - electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours. ( excellent condition.) - Item ID-13238 Chris 800.315.9950 x600 1994 Barko 275B Stationary Loader - Includes Mounting platform and 75HP electric motor. Very few hours as this machine was taken down shortly after purchase and was never used again. Has been sitting in excess material yard. Has 30’ reach. Continuous rotation grapple. Cab with AC. Original price was $140,000 - Item ID-12969 - Tom 800.315.9950 x604 1994 Barko 275B Trailer

Family Owned and Operated for Over 20 Years!

‘94 Prentice 180D Log Loader Item ID: 12759 Contact: Sam 800.315.9950 x603 www.LBXonline.com

Mount Loader - Joystick controls. CTR Delimber.

Recently overhauled Cummins 6BT5.9 engine.

Has been sitting for about 6 months. Great Value for a loader/delimber combination. The Barko 275B is a 30,000 lb. lift capacity unit. - Item ID13085 - Tom 800.315.9950 x604 1994 JD 640E Cable Skidder - Just over 10,000 hours; 23.1 x 26 Tires at 70%; Chains NOT included: Many updates-New Hydraulic Pump (6 months old), Rear end redone (3mo. ago); Hydraulic Control Block-New Seals (3 Months ago); Rebuilt Water pump (3 months ago). Unit running today. - Item ID12500 - Tom 800.315.9950

x604 1994 JD 640E Cable Skidder - Very clean and good running 1994 JD 640E. S/N 546241. New 28L x 26 tires.

Steering cylinders rebuilt; New steering bushings; New seat; New JD radiator; New Hyd Pump; New alternator; New injection pump; Blade valve rebuilt; New hoses; New 125’ cable. Hour meter broken but estimated hours are 10,500. Machine is too large for owner. - Item ID13102 - Tom 800.315.9950 x604 1994 JD 648E Grapple Skidder - Good running 1994 JD 648E. Single Arch Grapple. Winch. 28L x 26 tires at 65%. Cummins engine. 7470 hours. Item ID-13103 - Tom 800.315.9950 x604 1994 Prentice 180D Log Loader - 11,793 hours, Machine is in good

For Classifieds Call Your LBX REP at 1-800-315-9950

condition, it has been sand blasted and painted, low pro tires 17.5 - Item ID12759 - Sam 800.315.9950 x603 1994 Prentice 410D Log Loader Knuckleboom mounted on trailer w/ CTR Delimber, H/A, JD Powered - Item ID-13184 - Sam 800.315.9950 x603 1995 Barko 775 B Feller Buncher - Pumps recently redone. 400 hrs on injection pump. always started good. in good working order. 22in kohing head. head works great.

- Item ID-13185 - Sam 800.315.9950 x603 1995 Entyre Low Boy Trailer - 9’ 10” wide.

Decent condition. Priced to sell - Item ID-12946 - Tom 800.315.9950 x604 1995 Great Dane Flat Bed Trailer - 1995 Great Dane 96x48ft. Will need floor.

Tires are fair. Lights and June 2014 n 13

ROW ELECTRICAL EQUIPMENT, INC. YOUR SOURCE FOR USED, RECONDITIONED:

• Squirrel Cage Motors • Gear Motors • Wound-Rotor Motors • Synchronous Motors • DC Motors

Fax to:

• DC Motors - Crane and Mill • Adjustable Speed Drives • Generators - AC and DC • Engine-Generator Sets • Transformers, Single Phase

P.O. Box 2812 • Toledo, Ohio 43606

• Transformers, Three-Phase • Across/Line Magnetic Starters • Reduced Voltage Starters • Safety Switches • Phase Convertors

800-248-4479

www.rowelectrical.com 419-248-4479 rowelec@glasscity.net WE ANSWER THE PHONE 24 HOURS • WE BUY USED Electrical

419-244-8887

‘98 Cat D4H TSK Item ID: 13335 Contact: Tom Ph: 800-315-9950 x604

www.LBXonline.com brakes work. Priced to sell. - Item ID-12892 - Tom 800.315.9950 x604 1995 JD 290D with Hytec 4700 Harvester Head 290D in good condition.

Engine just overhauled.

Undercarriage at 50%.

New water pump. Runs well. Cab has heat and air with stereo and all run well. Head recently updated and does great job in hardwood. Priced to sell! - Item ID-12206 - Tom 800.315.9950 x604 1995 JOHN DEERE 693D CRAWLER BUNCHER - Multi Purpose feller buncher, 1995 John Deere 693D Crawler Multi purpose feller buncher c/w circular saw head and shear head, first time offered on the 14 n

Extec Shredder

Forest-All Mill

Item ID: 12926 Contact: Sam Ph: 800-315-9950 x603

Item ID: 12762 Contact: Sam Ph: 800-315-9950 x603

www.LBXonline.com market, only 6000 hrs. two heads, MUST SELL. Ideal for clearing development land. READY FOR LOGGING. - Item ID-13206 Sam 800.315.9950 x603 1995 Morbark Wolverine 3-Wheeled Feller Buncher - S/N 4073. Only 1000 hours on new JD 4 cylinder engine. Recently replaced turbo. 23.1 tires at 50%. 16” Rapid Buncher shear head.

Machine is fast and in very good condition. - Item ID12531 - Tom 800.315.9950 x604 1996 511EX Hydro-Ax With Bunching Saw Head - Hours est at 6800. Only 200 hours on factory reconditioned hydraulic motors and pumps. Comfort cab with working air. 28L tires

The Original Lumberman’s Exchange

www.LBXonline.com with chains at 50%. Saw head has side pocket for cutting larger trees. Very well maintained machine.

- Item ID-12072 - Tom 800.315.9950 x604 1996 Cat D5H XL Dozer - 50% Undercarriage. 6 way blade. Open ROPS. 5407 Hours. Runs good.

- Item ID-13021 - Tom 800.315.9950 x604 1996 Franklin 560 Cable Skidder - S/N 16432; Cummins Recon engine with 177 HP; 28L Tires at 60%; Heat and AC; Running today in very good condition. Hour meter broken. Estimated 9500. - Item ID-12734 - Tom 800.315.9950 x604 1996 Prentice 210D Knuckleboom - 10,332

hours. Please call Daren at Ext. 603 for more details.

- Item ID-12914 - Sam 800.315.9950 x603 1996 Timbco 425B w/ Fabtek Head - Good running machine with 9650 hours. Cummins 6BT5.9 engine. 24” pads. U/C at 50% or better. AC/Heat/ Stereo all work. Fabtek Model 2000RP 4-Roller processor head. - Item ID12830 - Tom 800.315.9950 x604 1996 Timberjack 230 Forwarder - 15,000 hours.

Good running condition.

Working today. Serco Loader. Dry and still runs strong. - Item ID-12943 Tom 800.315.9950 x604 1996 Timberjack 450C Grapple Skidder Approximately 9000 hours.

Working today. 28L x 26 tires at 40%. Chains for front tires. Single Arch Grapple. Winch. Heat and AC work well. Cummins Power. transmission has been gone thru, it has new glass in all windows but the front one. Heat and air fixed and new exaust pump, and the grapple cylinders repacked.

Visit us online at www.LBXonline.com!

For Classifieds Call Your LBX REP at 1-800-315-9950

June 2014 n 15

Financing Available

Shrink Wrap Firewood/Wastewood

1999 CAT 525B Grapple Skidder

Sell Your WOOD – $300/cord or More!

Double or triple your profits by shrink wrapping wastewood - forewood with WOOD-PAKer! Attractive various size packages can be obtained with our high production, easily operated and affordable machines. Eight machines available. The ideal equipment for producing square bundles-palletizable for ease in storage and transporting.

Inquire for free details. Video and Package samples at nominal fee.

B & B Manufacturing • 3007 West River Road • Olean, NY 14760

Toll Free 1-800-654-5320 E-mail: bbmfg@sprynet.com • Web: http://home.sprynet.com/~bbmfg/

‘99 Bandit 1900 Tracked Chipper w/Loader Item ID: 13294 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

- Item ID-12769 - Tom 800.315.9950 x604 1996 Valmet 603 3-Wheeled Buncher - 1996 Valmet 603 Three Wheeled Feller Buncher. Good running condition. Hours estimated at 8500. Meter does not work. 28L x 26 tires at 50%.

Koehring 18” Hot Saw. Cummins 4BTA3.9 engine.

16 n

‘00 Prentice 210E Slasher Pkg. on ST Carrier!

Item ID: 13272 Contact: Tom 800.315.9950 Ext. 604

www.LBXonline.com

AC and Heat work. Ready to work. - Item ID-13155 Tom 800.315.9950 x604 1997 Cat 527 Grapple Dozer - Tracked Grapple Skidder. Just under 16,000 hours. ESCO Fixed Boom Grapple & Winch Drum (no cable attached), 6 Way Blade, ROPS with Wire Cage Cab. Very good interior. Undercarriage at

The Original Lumberman’s Exchange

70%, Tracks at 90%, Well maintained and ready to work. - Item ID-12901 - Tom 800.315.9950 x604 1997 Kobelco SK 200 Log Loader - high and wide tracks, Jewell boom and grapple with 11,940 hours. Forestry guard package. Cab riser for great visibility that tilts for transport. It has a 19’ boom and a 12’ stick and 4’ live heel for 33’ reach. The grapple is 51” max open.

Serial #YOU3172. Cummins 6B5.9. 36” triple grousers for working on a yard. U/C at 60%. - Item ID-13229 Tom 800.315.9950 x604 1997 Linkbelt 3400 Stroke Delimber - rebuilt Pierce Stroke Delimber. 36” Pads on 60% undercarriage.

5221 hours. Good running condition. Owner just spent $30,000 on upgrading

Item ID: 12618 Contact: Sam 800.315.9950 x603

www.LBXonline.com delimber. - Item ID-12992 Tom 800.315.9950 x604 1997 Prentice 210E TMS Package - 9850 Hours on this very clean machine.

Working today. Has total merchandising system with CTR 414 Delimber and CTR 42 Slasher. Well maintained. Has AC but is not working. - Item ID12563 - Tom 800.315.9950 x604 1997 Timbco TF815 Forwarder - 1997 Timbco TF815 forwarder. S/N F42,, approx. 16000 hours, Cummins 5.9L 200 hp engine 4 tracks on 710/55x26.5 tires, Reman Rexroth tram pump 1/11, New drop box 2009, new tram motor 2009. The hydraulic system computer controller has been updated to TimberPro’s “TOC2” system. It is based on the newer IQAN control system. - Item ID-13232 Tom 800.315.9950 x604 1997 Timbco TF815C Forwarder - 5400 hours since new engine installed and rebuilt pumps.

Everything works strong.

Heat, air, OK. Needs oscillating center bearing.

Tires 2 new 750/55/26.5 all others are 60% some

Visit us online at www.LBXonline.com!

Precision 58 Chip Pac Item ID: 12764 Contact: Sam 800.315.9950 x603

www.LBXonline.com gouges. Turntable is tight.

Newer Rotobec grapple.

Pins and bushings are all good. Overall very reliable machine. - Item ID-13274 Tom 800.315.9950 x604 1997 Timberjack 460 Grapple Skidder 12,300 hours. Very well maintained. 28L x 26 tires at 90%. Big winch. 100” Esco Grapple. Cummins engine. Working today.

- Item ID-12564 - Tom 800.315.9950 x604 1998 Franklin 170 Cable Skidder - 28Lx26 tires 50% rear and 30% front; Recon Cummins 6BTA5.9 engine added about a year and a half ago; Hour meter is broken; H38 Franklin winch; Very clean and works almost everyday.

Chains NOT included.

- Item ID-12735 - Tom 800.315.9950 x604 1998 Freightliner Haul Truck - Decent condition.

923,000 miles. Well maintained. Good back up rig! - Item ID-13022 - Tom 800.315.9950 x604 1998 Hydro Ax 611EX Feller Buncher - about 8800 hours. Bunching Saw Head has large pocket for accumulation and lifting side shield for notching larger trees before felling.

‘90 Clark 667 Grapple Skidder Item ID: 13224 Contact: Tom Ph: 800-315-9950 x604

www.LBXonline.com Cummins engine. 28L tires at 60%. Decent running condition. - Item ID-13245 Tom 800.315.9950 x604 1998 John Deere 650G Dozer - New tracks 95%, very good shape, 7,000 hours. 6-Way Blade.

- Item ID-12700 - Tom 800.315.9950 x604 1998 Model DM Mack Log Truck - 300 HP Mack Engine; 330,000 miles; 7 Speed Transmission, 46K Rear, 20K Front, Tri -Axle, 22.5 Tires, Like New Log Bed, Truck is in very good condition! Plumbed to take pup trailer. Very well maintained. - Item ID-12493 - Tom 800.315.9950 x604 1998 Pitts 42’ Log Trailer - Nice condition. 42’ long.

102” wide. 95,000 lb GVW. - Item ID-12565 - Tom 800.315.9950 x604 1998 Tigercat 230 Loader 9400 hours. Tight and dry.

No leaks. AC blows cold.

Priced to move! - Item ID12616 - Tom 800.315.9950 x604 1998 Timbco 425 w/Quadco 2800 Saw - Clean unit and well maintained. 2800 has 360 degree rotation for max production. 24” single grousers. Undercarriage at 50%. Pumps are dry.

Machine working today.

- Item ID-12719 - Tom 800.315.9950 x604 1998 Valmet 603 3-Wheeled Buncher - 6500 hours on total machine but no hours on 4BT3.9 Reman Cummins Engine. Equipped with 18” Waratah High Speed Disc Saw. 28L x 26 Tires at 40% complete with chains.

This machine has been

For Classifieds Call Your LBX REP at 1-800-315-9950

extremely well maintained and runs very well. Hard to find them in this good of condition. Has a twin that is available if you need two units. - Item ID-12524 - Tom 800.315.9950 x604 1998 Valmet 603 3-Wheeled Buncher - Good running machine with about 6620 hours. Owner maintains his equipment to the highest degree and it shows. Complete with Waratah High Speed Disc Saw Head. 28L x 26 Tires with chains at 90%. Just installed new Reman Cummins 4BT3.9 Engine.

- Item ID-12525 - Tom 800.315.9950 x604 1999 Cat 525B Grapple Skidder - heat and a/c, New Motor with 3000 hours, New Bushings, New Grapple Cylinder, New Turbo, Tires are 28L x 26, fronts are at 40% and rears are at 80%. - Item ID-12618 June 2014 n 17

Blades has been selected by Armstrong Manufacturing as a “Authorized Dealer” for butor for sales and service of Genuine Armstrong equipment, , and service for the Eastern United States. The following states overed by this agreement: e, New Hampshire, Vermont, Massachusetts, New York, Custom ecticut, Rhode Island, Pennsylvania, New Jersey, Maryland,Firewood Proc.

Item ID: 13108 ware, West Virginia, Kentucky, North Carolina, South Carolina, Contact: Sam U.S. been selected bysupplier Armstrong Manufacturing as a U.S. Blades Blades has is your single source of high quality knives, 800.315.9950 x603 gia, Alabama and Florida. distributor for sales and servicesupplies of Genuine saws and related maintenance for Armstrong Sawmills &equipment, Chip Mills. www.LBXonline.com

parts, and service for the Eastern Unitedthe States.

The following With locations to serve mills throughout Southern wood beltstates to Blades also has field service technicians for installation and are covered by this agreement: the Northeast, U.S. Blades is here to support the Forest Products Maine, New Hampshire, Vermont, New York, Industry providing new products asMassachusetts, well as repair services. ce of all Armstrong equipment with many years of Armstrong Connecticut, Rhode Island, Pennsylvania, New Jersey, Maryland, equipment knowledge that will benefit our customers.

Delaware, West Virginia, Kentucky, North Carolina, Carolina, U.S. Blades knives and saws are “Feared

By TreesSouth Everywhere.”

Georgia, Alabama and Florida.

parts

Stocking Locations for “Genuine Armstrong

U.S. Blades also has field service technicians forParts installation and and Equipment” service of all Armstrong equipment with manyFlorence, years of Armstrong parts SC 800-862-4544 and equipment knowledge that will benefit our customers.

Hampden, ME 800-432-7358 ‘04 Timbco Stocking Locations for “Genuine Armstrong Parts and Equipment” Florence, SC 800-862-4544 Locations Authorized to Sell: Hampden, ME 800-432-7358 Florence, SC • Hampden, ME • Meridian, MS

425EXL w/360 Hotsaw 2 Sets of Tracks!

Item ID: 13330 Contact: Tom 800.315.9950 Ext. 604

www.LBXonline.com

usblades.net•• 800-862-4544 800-862-4544 usblades.net

Sam 800.315.9950 x603 1999 Deawoo 220 solar ll - 11000 hours, it has heat and air! Its a Daewoo inline 6 Engine 145 hp. The Computer works for the stroker. Tracks are around 11’. Stroke delimber is a Pro mark 50. It’s designed under the timberline, and has a timberline head on it.

We have all the maitenance records and extra parts!

Great running machine!

- Item ID-12936 - Chris 800.315.9950 x600 1999 JD 643 DELTA Carrier w/Rake - This machine is 18 n

a 99 model Delta. VERY POWERFUL and UNIQUE! It has a CAT 350hp engine, THREE pumps and valves that can work a mower, feller buncher saw head, or high speed mulcher.

Only 5000 hours. 34” Tires at 60%. This machine was built on the 643G assembly line, so parts come from Deere except for the engine which CAT will support. This machine is designed for heavy duty work and includes an extra capacity fuel tank, water tank, and hydraulic tank.

The Original Lumberman’s Exchange

This is a WORK HORSE and a super value! Comes equipped with a 10 foot rake. The cab is well appointed with cold air and heater. This machine was recently completely serviced and is ready to go to work. - Item ID-12624 Tom 800.315.9950 x604 1999 Tigercat 860D Delimber - w/ 3500 DEHNARCO STROKE DELIMBER. Machine was purchased new in 2001 and has appr. 13,500 hrs.

A new JD reman engine was installed less than

300 hrs. ago, machine also has CONTROL PLUS 2 measuring system and top saw and butt saw. Machine is currently on job working. - Item ID-13189 Sam 800.315.9950 x603 1999 Timbco 425/Valmet 500 Harvester - Branded a Valmet 500T Harvester, this is in fact a Timbco 425 Leveling Tracked Harvester with a Valmet processing head. Comes with fire suppression system; 5.9 Cummins; Burns about 4.5-5 gallons an hour. The U/C has less than a 1000 hours on it. Equipped with a Cranab 1400 squirt boom.

Comes with Lox Max 4000 harvesting head, with Logmate 402 computer.

Visit us online at www.LBXonline.com!

Every Reputable Wide Band Supplier Offers

‘01 Hydro Ax 721E Mulcher

Item ID: 13230 Contact: Tom Ph: 800-315-9950 x604

www.LBXonline.com Head has about 4500 hours. Log Max- s/n 2186.

Machine hour meter not working. New oil cooler 100 hours ago. Extra chains and bars, plus some parts from uptime kit. - Item ID-13140 - Tom 800.315.9950 x604 1999 Timbco 425D Harvester w/Keto 800 - 800 Processing Head.

S/N 1598; Approx 14000 hours; Squirt stick and long harvester boom (36’ reach), 28” double grouser pads. Cummins 8.3L 260 hp engine (New Reman 11/10 ). New rails and rollers 9/11. Reman Rexroth tram pumps 1/12. Non continuous rotation on upper. Keto 800 processor head; Approx. 2002 model.

S/N C3T020 ( 2002?), new tracks, top knives 11/11, 40” 11H bar, 33” cut, no top saw, Hakmet computer, CanBus computer system with 4 wires. - Item ID13150 - Tom 800.315.9950 x604 2000 Cat M318 MH Totally refurbished with 30 day warranty. Gone through from end to end by professional rebuild factory. Hydraulic elevated cab for great visibility. 38’ reach. Logging grapple

‘08 John Deere 334J Only 900 hrs!

Item ID: 13034 Contact: Sam 800.315.9950 x603 www.LBXonline.com

‘06 JD 843J Feller Buncher

Item ID: 13258 Contact: Tom Ph: 800-315-9950 x604

www.LBXonline.com included. Fantastic Yard Machine. FOB: Idaho.

Financing available.

Possible RENT OPTION! - Item ID-12520 - Tom 800.315.9950 x604 2000 Fabtek 153 Harvester - 13,000 hours. New Engine; New Pumps; New Roller Chain; Runs Great! Working today. - Item ID-12944 - Tom 800.315.9950 x604 2000 GMC 8500 Log Truck w/Loader - Six speed transmission with a 2 speed rear end. Powered by a strong CAT 3126 engine with 250HP. Approx.

106,000 miles. Truck is single axle with pusher in front. Pusher purchased new one year ago. Loader is a 1995 Prentice Model 120c w/22’ reach. Has one or two hydraulic drips.

Pole Trailer is a 60’s model Frost w 80% tires in very

3 High Quality Swedish Steel 3 3” – 8” Band Width 3 16 to 20 Gage 3 Double Cut Options 3 Choice of Swage or Stellite

WOLVERINE

BUT ONLY THE

BY MENOMINEE SAW GUARANTEES • Cutting Edge Plasma Welds • The Industry’s Highest Band Saw Capacity • Quick Delivery from our HUGE Inventory • Fast Sharpening & Exchange Program to Keep YOU Running • Competitive Pricing And ONLY Menominee Gives You Everything You need in a Wide Band Saw – Plus Expert Service from the Industry’s Most Knowledgeable Staff.

Got a Wide Band Problem?

Call Menominee Saw Today and You’ll Learn Why More Mills Trust the Pro!

TOLL FREE 1-800-582-0470 900 16th St., Menominee, MI 49858 Tel: 906-863-2609 Fax: 906-863-1147 Email: info@menomineesaw.com

WWW.MENOMINEESAW.COM good condition. Pulls great. - Item ID-12893 - Tom 800.315.9950 x604 2000 New Holland EC215 w/ Waratah 616 Processor - Approx 7200 hours.

2000 New Holland Model EC215 with Waratah 616 Processing Head; Carrier in good condition. Tracks at 70% with 32" pads; Cummins 6BT5.9 engine with 154HP; S/N 721580; Operating weight = 47000 lbs; Waratah head has top saw option. - Item ID-12849 - Tom 800.315.9950 x604

For Classifieds Call Your LBX REP at 1-800-315-9950

2000 Peterbilt Sleeper Truck - Good running condition. Priced to sell.

- Item ID-12492 - Tom 800.315.9950 x604 2000 Prentice 625ATL Loader - All Terrain Loader. All wheel drive and steer. Set up to pull loaded trailer. Great yard machine. 10,800 hours. Cab access platform. Cab riser.

All maintenance history available. FOB: Maine.

- Item ID-12898 - Tom 800.315.9950 x604 2001 Chevy C7500 Service June 2014 n 19

Safety� Safe Durable� Durable

(262) 673-6801 Local

Comin gS 4 New oon Mode ls

Made inA the US

The Firewood Factory Lil’ Beaver Model Call for Free DVD

Starting at

8995

$

Beaver Model 18 Optional Features Available

Reliable� Reliable� Reliable

Convenience� Convenient

Features: • 1 to 2 plus full cords per hour (128 cubic feet) • Cuts up to 16” diameter and up to 20’ lengths • Splits wood up to 24” • Splitter cycle time 4-5 seconds • Honda Engine GX-390, Subaru 14hp or PTO driven • Super fast, Super Safe!

Call Toll Free

Nothing Eats Wood Like a Beaver 1-800-569-6813 www.woodbeaver.net | sales@rrsinc.net

‘97 Kobelco SK 200 Log Loader

Item ID: 13229 Contact: Tom Ph: 800-315-9950 x604

www.LBXonline.com Trk w/Trailking Trailer Great package. Chevy truck has Cat 3126B engine.

28,877 miles. 22.5” tires are in good shape. Good steel flatbed with mini fifth wheel and headache rack.

Trail King Trailer Model # TK 32-2401. GVWR 40180 lb; GAWR 18160 lb.ea. with 215/75R X 17.5 (16PR); Floor 19’ long; Tail 5’ long; Hyd operated ramps 5’ long. Super package and priced to sell!! - Item ID20 n

CAT 518 Cable Skidder Item ID: 1333 Contact: Sam 800.315.9950 x603 www.LBXonline.com

12746 - Tom 800.315.9950 x604 2001 Hydro Ax 721E w/ Fecon BH120 mulching head - 8480 hours. John Deere 200HP engine. Serial #7841. Fecon mulcher is a Model BH120 HHD263, the serial # is 12HO17A2. The Fecon needs new bearings.

28L tires at 50%. Comes with a full set of ring chains. INCLUDES BRAND NEW HD BRUSH GRAPPLE! - Item ID-13230 - Tom 800.315.9950 x604 2001 Precision 23/66 Whole

The Original Lumberman’s Exchange

‘97 Timbco TF815 Forwarder Item ID: 13232 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

Tree Chipper - One Owner: S/N 3310. Cat 3412E engine with 750HP s/n 4CR01701.

New Injectors. Includes air compressor. Oil changed every 250 hours. 10,500 hours and runs like new.

3 axle trailer, California legal, rubber at 85%, and good brakes. Tows smooth. Equipped with Husky 175 loader. Has 3 knife disc with key knife system installed. Makes a super clean chip. Cab has heat and AC working well.

Also has stereo radio and CB. New glass in loader.

External chute controls.

Super Clean! - Item ID12526 - Tom 800.315.9950 x604 2001 Timbco 820-D Forwarder - Serial #TB154012901. Hour meter reads ™� 7075 but actual hours are about 9500. Brand new Cummins 260 HP Engine with Cummins Warranty 1.5 hours on engine. New Coupler between Transmission and Engine. New Pivot pins and Bushings. 360 degree Supergrip Grapple. One Set Log Bunks. One Set Tracks - Item ID-13094 - Tom 800.315.9950 x604 2001 Timbco 820-D Forwarder - It has 21,000 hours on a Cummins 260hp engine. The pins and bushings are tight.

Just put a new swivel on the grapple. It has New hydraulic hoses, new drop heater, and new fuel injectors! Machine is working now! - Item ID13217 - Chris 800.315.9950 x600 2001 Valmet 860.1 Forwarder - 6 Wheel Drive.

Chains for most tires.

17,000 hours. Runs good and is working today.

Owner is upgrading.

- Item ID-12867 - Tom 800.315.9950 x604 2002 New Holland TV140 w/10’ Brush Cutter - Only 3000 hours. Very well maintained. Brush Cutter has less than 500 hours.

Complete with winch and forestry package. Tires at 80%. Comfort cab with great visibility. Extremely productive and stingy on fuel. - Item ID-12414 - Tom 800.315.9950 x604 2002 Tigercat 845B w Quadco Hot Saw - 8500

Visit us online at www.LBXonline.com!

Integrity • Precision • Quality • Value

Woodmaster ‘01 Sterling Truck Item ID: 13309 Contact: Sam Ph: 800-315-9950 x603

www.LBXonline.com

Wanted: Bell Ultra C Feller Bunchers We have buyers looking for both track and rubber tired!

See why we are your Best Source for bandsaw blades!

We offer the highest quality welds and our people use the highest level of integrity and precision to give you the best bandsaw blades in the business—we ship all over the US. Satisfaction always guaranteed!

Thin Kerf

Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

Band Saw Blades Ask About Our Dismanteling Blades

‘03 JD 650 G Dozer w/Winch

Item ID: 13270 Contact: Tom Ph: 800-315-9950 x604

www.LBXonline.com hours on machine. About 3200 on new Cummins engine. Quadco head has 40 degree tilt and new saw blade. Tracks at 60%.

Rebuilt 2 years ago. Well maintained. Heat and A/C in cab. - Item ID-12751 Tom 800.315.9950 x604 2002 Timbco 425D w/ Fabtek Proc. Head - Very nice machine and well maintained. 11,229 hours, but only 1400 on recon Cummins engine. 24” Single Grousers. Undercarriage is 70%. Fabtek has been rebuilt and updated to make it stronger than new. Head works great.

- Item ID-12659 - Tom 800.315.9950 x604 2002 Timbco 445D w/22” Quadco Hot Saw - Only 2400 hours on Upper which was replaced after burning

‘12 Lamtrac 8400T Mulcher Item ID: 13272 Contact: Tom 800.315.9950 Ext. 604

www.LBXonline.com

at 2000 hours. Total hours on lower undercarriage is 4400 and has been rebuilt.

70% life left on lower.

Customer has rebuilt the engine with a new cylinder head, pistons, rings,bearings,gaskets, and fuel transfer pump with only 700 hrs. on rebuild..

Unit has a new saw disc on the 22” Quadco Hot saw with 360 degree wrist...

Main boom to stick boom pin and bushings have been replaced in a the last 3 months and saw pump was installed about a year ago. THIS IS ONE OF THE CLEANEST 2002 MODELS YOU WILL FIND AT THIS PRICE! - Item ID-12541 Tom 800.315.9950 x604

ck Cheut Our O

1-888-857-5153

Quality • Our Service • Our Price

2002 Timberjack 608s with hot saw - approx. 6000 hours, Machine is in very good shape and has been well maintained. - Item ID12194 - Sam 800.315.9950 x603 2003 Cat 533 Hot Saw FB - 7500 hours. 28L tires at 70%. Working today.

- Item ID-13080 - Tom 800.315.9950 x604 2003 Franklin Q70 Grapple Skidder - Enclosed Cab W/ Heat & A/C, 28Lx26 Tires 85% Rear, 70% Front, 100 Hours On Dealer Rebuilt Transmission, 600 Hours On Cummins Recon Engine 6BTA 200 H.P. Winch and Grapple. Excellent one owner machine! - Item ID12337 - Tom 800.315.9950 x604 2003 Franklin Q80 Grapple Skidder - 7500 hours, but just 5000 hours on reman

For Classifieds Call Your LBX REP at 1-800-315-9950

engine. New Radiator; New Hydraulic Pump; Comfort cab with good working heat and air; Tires at 80%. - Item ID-12450 - Tom 800.315.9950 x604 2003 Hydro Ax 670 with Bunching Head - Super nice machine with ONLY 1600 hours! 30.5 tires at 90%.

Cummins 6BT8.3 engine.

AC/Heat. Side pocket style head. Jewel of a machine!

- Item ID-12729 - Tom 800.315.9950 x604 2003 JD 648GIII Dual Arch Grapple Skidder Refurbished with approx.

8000 hours. 30.5 x 32 tires at 50% or better.

The machine is dual arch w/reman arch, boom, grapple, engine and transmission. The machine also has had the normal repairs of: resealed all cylinders, pins and June 2014 n 21

‘96 Peterbilt Truck Item ID: 13317 Contact: Sam Ph: 800-315-9950 x603

www.LBXonline.com

‘08 JD 2554 Loader w/ Waratah

Item ID: 13235 Contact: Tom Ph: 800-315-9950 x604

www.LBXonline.com bushings, center pins, cradle and addressed all electrical issues.

Any potential problems were found and fixed or replaced. Limited Power Train Warranty. Can exchange existing tires for new and receive credit on existing tires against new tire price. Ex: add new 30.5 x 32 tires for $14,000.

- Item ID-12905 - Tom 800.315.9950 x604 2003 JD 648GIII S/A Skidder - Super Clean JD 648GIII Single Arch Skidder.

S/N shows this is a 460 Timberjack direct drive skidder which is exactly the same as the JD 648 GIII. Selective use. 11,000 hours.

Winch. 28l x 26 tires at 90%! That’s about $10,000 + in new rubber! Runs great.

Well maintained. Engine rebuilt in 2013 with less 22 n

than 100 hours. - Item ID13087 - Tom 800.315.9950 x604 2003 JD 650 G Dozer w/ Winch - Nice running condition dozer. Hour meter broken. Estimated 5000 hours. U/C in decent shape with newer sprockets and rollers. 6 way blade. Winch with fairlead rollers. Great support tool for any logging job. - Item ID-13270 - Tom 800.315.9950 x604 2004 Barko 495 Loader w/Delimber - 11000 Hrs. New Turntable Bearing.

Upper and Lower Valves Resealed. Both swing motors resealed. New pins and bushings in main and jib boom. CTR 450 Delimber. Cold AC. - Item ID-12897 - Tom 800.315.9950 x604 2004 Cat 535B Grapple

The Original Lumberman’s Exchange

Skidder - SIN AAE00566, 12,000 hours. Replaced center pins, repacked cylinders, and repaired hydraulic control valve for grapple. 73 x 44, 32 tires- Runs good. Priced to sell! - Item ID-12693 - Tom 800.315.9950 x604 2004 Fabtek 133 Harvester - 11,400 hours. One owner machine. Very nice condition. Fabtek 4 Roller processing head.

Pro Heat cold weather start system. One track is brand new. Working today.

Customer shutting down job. - Item ID-12950 - Tom 800.315.9950 x604 2004 Franklin Q80 single arch grapple skidder with winch - 200 HP Cummins engine Powershift transmission Comfort cab with working heater and

‘98 Hydro Ax 611EX FB Item ID: 13245 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

AC New Manifold gasket and bolts New muffler New grapple head New shifter box Tires 85% 28L X 26 Good Solid Machine- Runs great! - Item ID-12843 Chris 800.315.9950 x600 2004 John Deere 700H LGP - This machine has 1987 hrs on a crate motor. Very Strong running machine.

Being used daily! Limb Risers, screens, 6 way blade, 30” pads. - Item ID13035 - Chris 800.315.9950 x600 2004 Log Max 9000 Proc.

Head - Good running condition. Owner was processing 900 tons/day when he shut down job.

This unit is similar to Log Max 7000XT. Has optional top saw with it. Parts are similar to 7000 Log Max as well. Rebuilt every year. Many spare parts.

Computer included. Super Value! - Item ID-12929 - Tom 800.315.9950 x604 2004 Ponsse Buffalo King Forwarder - 18 ton capacity. S/N 120001, 2 part extendable K100 loader. (1) new 750/50x26.5 tire Nov ‘13, (2) tracks rebuilt Nov 2012, (1) track rebuilt Nov 2011, (1) track new Nov 2011, Hydrostats replaced 2010; New centerpin Nov 2011; New

Visit us online at www.LBXonline.com!

210 Prentice Loader Item ID: 13249 Contact: Chris 800.315.9950 Ext. 600 www.LBXonline.com

‘06 JD 848 Grapple Skidder

Item ID: 13175 Contact: Tom Ph: 800-315-9950 x604

www.LBXonline.com front diff; all planetaries and bogies inspected; Nov 2011. Hyd Pump replaced 2010; Loader hoist and stick cylinders repack/ repaired Dec 2014; Drop box replaced 2010; New radiator June 2012. Approx 23000 total hours. Timbco clambunk attachment with all plumbing made to attach to Ponsse frame (needs clamps) - Item ID13151 - Tom 800.315.9950 x604 2004 SMV Rottne Forwarder - 16 Ton Capacity; 11,200 hrs; 8 new tires; 1 set of tracks. Ready for work! This machine is extra clean. One owner. A. Length = 31.5 ft in/9600 mm. B. Width Over Tires = 9.4 ft in/2880 mm. See specs: http:// www.rottnecanada.com/

2008 CordKing Model 44 Item ID: 13167 Contact: Chris 800.315.9950 Ext. 600 www.LBXonline.com

‘06 Loglift 140 Stationary Ldr Item ID: 13275 Contact: Tom 800.315.9950 Ext. 604

www.LBXonline.com

rottne09Eng_ProductsSMV. html - Item ID-13277 - Tom 800.315.9950 x604 2004 Tigercat 240B Log Loader on Trailer - Very clean. One owner machine.

Good maintenance. Tight and dry. 7800 hours. Brand new engine just installed!

Planetary gears on swing just replaced. New main hyd. pump. Loading logs now. Cummins 5.9.

- Item ID-12617 - Tom 800.315.9950 x604 2004 Trail King belt trailer - 4690 rated at 78 yds. The trailer is in great shape for its age. It has a shurco roll over tarp that will need attention but is in working order. The one piece belt is in great shape, no tears or rips and operates flawlessly. Trailer will be sold as-is for 30k. Also all 8

tires are near new and just passed a DOT inspection station in feb. - Item ID13173 - Sam 800.315.9950 x603 2005 Barko 595 Loader on SP Carrier - Loader on Big John Self Propelled Carrier.

Carrier is towable. Unit has 7900 Hrs. Equipped with Live Heel and continuous rotation grapple. Has JD 185HP engine. Has Cab Riser with Tilt Option for easy transport. - Item ID12912 - Tom 800.315.9950 x604 2005 Ecolog 580B Harvester - with Log Max 7000 Processing Head w/Steel Rollers.

Very good running condition. S/N 240. 7700 hours. Recent updates include: New water pump; New implement pump; New swing motor;

For Classifieds Call Your LBX REP at 1-800-315-9950

New hydraulic oil cooler and oil cooler bypass valve. It has a DASA4 control system and ICAN monitoring system.

Rear bogeys are 650 size and include one set of tracks. Engine is Cat 3126.

Equipped with a Wabasto preheater. Machine is factory reconditioned by Ecolog. Center section and bearings are new. - Item ID12826 - Tom 800.315.9950 x604 2005 John Deere 903G Feller Buncher - GN Roy 22'' continuous saw head. Heated & A/C cab.

Standard boom. Medium pads. Operator, service, and parts books included.

- Item ID-13203 - Sam 800.315.9950 x603 2005 Komatsu D39 PX Dozer - Approx. 2150 hours, 6-way dozer, June 2014 n 23

‘04 JD 648GIII S/A Skidder New

Item ID: 13087 Tires Contact: Tom Ph: 800-315-9950 x604

www.LBXonline.com

‘81 JD 850 Grapple Dozer

Running Today!

Item ID: 13149 Contact: Tom Ph: 800-315-9950 x604

www.LBXonline.com

Woodland K4 Industrial Sawmill Item ID: 13263 Contact: Chris 800.315.9950 Ext. 600 www.LBXonline.com

canopy, joystick controls, limb risers 25" pads, SBG, new hydrostats and pumps Undercarriage 75%, condition good to very good - Item ID-12994 - Tom 800.315.9950 x604 2005 Morbark Model 2755 Flail/Chipper - S/N = Q78. Hours = 6500. Tires: 295/75R22.5. (Two) Cat engines: Model 3412 in front with 860HP: Model 3406 in rear with 425HP. Originally came out as a 3 flail converted to a 2 flail debarker. Handles up to 30" whole trees. Set up for 2" chips. Recently came off job. Well maintained and in good condition. - Item ID12690 - Tom 800.315.9950 x604 2005 Prentice 280 TMS Good running machine.

Hour meter shows less than 2000 hours but 24 n

owner believes it to have about 6000. Machine s/n is PR59771. Unit has Cummins engine and runs good with no blow-by and has no leaks and is tight Dependable machine that is priced right with the market. - Item ID-12527 Tom 800.315.9950 x604 2005 Takeuchi Supertrack Skid Steer with B74 Fecon Head - 981 Hours. 102 HP Engine. New Tracks. Fecon B74 Mulching head with new teeth. Winch. Comes with spare 80" bucket. Half the price of new. - Item ID12413 - Tom 800.315.9950 x604 2005 Tigercat 718 FB w/5500 Saw Head - Very well maintained machine with 9400 hours. Dry and tight. 28L tires at 60%.

Running good today. AC blows cold. Heat works

The Original Lumberman’s Exchange

great. Center section tight. - Item ID-12939 - Tom 800.315.9950 x604 2005 Timberking TK360 Feller Buncher - Rubber tired, good condition 9023 hours, new A/C. 22" high-capacity head w/ side cutter put on at 5000 hours. Front tires at 75%, back tires 50% - Item ID12995 - Tom 800.315.9950 x604 2005 TimberPro 830TF Forwarder - 6580 hours.

Very good condition.

Tracks for all bogies.

710/45-26 tires at 70%.

Includes bolsters and back rest. Comes with 36" grapple with grapple saw option. Set up with harvester hydraulics according to owner.

- Item ID-13161 - Tom 800.315.9950 x604 2005 Valmet 860.1

8-Wheeled Forwarder - 13,800 hours. New hydraulic transmission and gear box. $70,000 of updates just completed by local Valmet/Komatsu Dealer. Spare pump ($7,000 value) Good running condition. Sisu engine uses 4 gal/hour. 16 ton capacity.

Tracks for front and back.

Front blade. Hood guard.

- Item ID-12267 - Tom 800.315.9950 x604 2005 Valmet 941 Harvester - Totally refurbished head to toe! Very good running condition. Over $50,000 in recent updates and maintenance. New center pin bushings; new bogey seals; valves resealed; all cylinders packed. 10,200 hours. Largest of rubber tired harvesters. Has Valmet 370.2 processing head with less than 4000 hours. Engine runs well.

Tires at 50%. This is a hard to find gem and priced below market. - Item ID12569 - Tom 800.315.9950 x604 2005 Valmet/Timbco 415 Harvester with 370E Head Very nice unit. 7400 hours.

370E Harvesting head just added 22 months ago and only has 2000 hours.

Visit us online at www.LBXonline.com!

Reconditioned Electrical Equipment Saves You Money, Big Money!

‘08 Ponsse Elephant Forwarder

VFD Control

Many Items In Stock Ready for Immediate Shipment!

18-ton Capacity!

Item ID: 13163 Contact: Tom Ph: 800-315-9950 x604

www.LBXonline.com 36" Triple Grouser tracks at 60%. Sisu engine that is very stingy on fuel. 8' squirt at end of boom for 30' reach. Reversible fan and auxiliary oil cooler.

- Item ID-12266 - Tom 800.315.9950 x604 2006 Hydro-Ax, Model 764 w/ AX1910 Mowing Head - 4700 hours. Cummins engine. 30.5 x 32 tires at 60% or better. Includes tire chains for all tires. Good running condition. Well maintained. - Item ID-12987 - Tom 800.315.9950 x604 2006 JD 648GIII Grapple Skidder - 9400 hours on good running machine.

Sweda Axles with 28L & 23.1 Duals. Winch.

Recently rebuilt JD engine.

Dual Arch Grapple. Heat and AC. - Item ID-13088 Tom 800.315.9950 x604 2006 JD 748GIII Grapple Skidder - 7200 Hours; New JD Transmission at 6500 hours; A/C and Heat work well; 30.5 x 32 tires @ 40%; No winch but has

We Buy, Sell, or Rent— Used, Obsolete and Hard to Find Industrial Electrical Equipment Automatic Reduced Voltage Starter

All Sizes of Motors Manual Transfer Switch

Combination Starter

When you need it Now— And at the Best Price!

You Need Weaver Electric Motor Control Starters (Solid State)

Disconnect Switch

Call Today!

Toll Free 800-257-0038

Ph: 303-288-0746 • Fax: 303-288-0218 6591 N. Washington, Denver, CO 80229 Web: www.weaverelec.com Email: spark@weaverelec.com

the controls in cab; Heavy duty Sweda axles. - Item ID13120 - Tom 800.315.9950 x604 2006 JD 843J Feller Buncher - 2006 John Deere 843J Wheeled Feller Buncher; 6775 hours ; 20 ply 28L26 tires @95%; John Deere FD22B hot saw. Runs Good. Chains not included.

Well maintained. - Item ID13258 - Tom 800.315.9950

x604 2006 JD 848 Grapple Skidder - 6500 hours.

Very strong machine. 30.5 Tires...3 at 50%, one at 90%. Dual rings on rims.

- Item ID-13175 - Tom 800.315.9950 x604 2006 John Deere 748GIII Dual Arch Skidder - 8900 hours. Good condition.

Working today. One owner machine. Tight and dry.

For Classifieds Call Your LBX REP at 1-800-315-9950

32.5 tires at 50%. - Item ID12542 - Tom 800.315.9950 x604 2006 Loglift Model 140 Stationary Loader - Like new; Actual unit is on pallet and ready to ship as seen in other photos.

Less than 1500 operating hours. Comes with complete power pack for running machine. Includes stainless steel operators June 2014 n 25

BANDSAW BLADES

We have the most popular sizes in stock & ready to ship from major manufacturers, including…

We also offer expert Sharpening Services, plus…

Gang • Edger • Scragg Trim • Split • Strob …and

just about any Custom Saws you need to keep you cutting longer… for less!

Welded to your lengths!

Call Marvin Miller for a quote 231-924-5953 • (fax) 231-924-6166 • 11606 Brickyard Rd. • Holton, MI 49425

wanted

Older John Deere 648GIIIs & 748GIIIs

2004 Ponsse Buffalo King Forwarder

We have buyers looking!!

Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

Item ID: 13151 Contact: Tom Ph: 800-315-9950 x604

cab with joystick controls.

30' reach. Continuous bypass grapple. Loglift is the highest quality loader made in Europe. Parts readily available in US. Lift capacity of about 2200 lbs at max reach. Smooth on demand hydraulic system.

Priced at a fraction of new. - Item ID-13275 - Tom 800.315.9950 x604 2006 Peterbuilt Log Truck w/Loader & Pup - Rosa aluminum crib pup trailer.

Has Rotobec Model 80 elite loader. Cummings motor with 450,000 miles.

Excellent shape. Hauling logs today. - Item ID-13018 Tom 800.315.9950 x604 2006 TF 810 TimberPro Forwarder - w/ Cold Weather Package Start.

26 n

Many updates!!

www.LBXonline.com 6744 hours. 260 HP Cummins. One set tracks at 60%. 700/50 tires @ 60%. Very good running condition. - Item ID-13114 Tom 800.315.9950 x604 2006 Tigercat 630C Grapple Skidder - Decking blade, new a/c installed, new hydrostats; Dual function grapple, 40K Allied winch; 30.5L32 tires, 3 @ 75%, 1 @ 20% Condition good to very good, Approx. 6900 hours - Item ID-12996 - Tom 800.315.9950 x604 2006 Tigercat 720D Feller Buncher - New Cummins Engine, Enclosed Cab heat & air, 28.1 x 26 Tires, 5000 series sawhead.

7012 hours. Very good condition. S/N 7204313

The Original Lumberman’s Exchange

‘05 TimberPro 830TF Forwarder Item ID: 13161 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

- Item ID-12752 - Tom 800.315.9950 x604 2006 Valmet 890.3 Forwarder - Well maintained 20 ton forwarder by Valmet.

Has 13,700 hours. Very good running condition.

Front hood guard and two complete sets of tracks included. Located on West Coast. Priced to sell! - Item ID-12709 - Tom 800.315.9950 x604 2007 Bandit Model 3680 Beast Grinder - Only 780 confirmed working hours; 700HP C-18 CAT Engine; Twin Disc Hydraulic Clutch; Air Compressor; Reversible Fan; Remote Control; IQAN Controls; Magnetic head Pulley;

Excellent condition!

- Item ID-12628 - Tom 800.315.9950 x604 2007 Case 1150K Dozer 2565 Hours on very strong dozer. Case 130HP engine.

Open ROPS cab. 24" pads; Rock Guards; Canopy Brush Guard; Hydraulic PTO; Runs strong and priced to sell. - Item ID12348 - Tom 800.315.9950 x604 2007 Dodge Service Truck - 5.9L Cummins. This is the last of this kind of engine. Includes tools, fuel tank, spare parts, and air compressor. Super Package! - Item ID-12910 Tom 800.315.9950 x604 2007 Fecon FTX440 w/ Fecon BH 350 Mulcher - Totally rebuilt in 2009

by Fecon with all 2009 updates. 1670 hours. Cat 440 HP Engine; Heavy Duty Winch; Triple grouser high flotation tracks; Excellent condition. Priced to sell!

- Item ID-12632 - Tom 800.315.9950 x604 2007 Hood Model 182 Loader on Carrier w/ Slasher - Super Clean Hood Model 182 Loader mounted on Hood self-propelled and towable carrier.

Includes Hood circle saw slasher package. Approx.

6700 hours. Excellent

Visit us online at www.LBXonline.com!

Now One Phone Puts You in Touch with the Single Source for all your Sawmill Needs!

‘96 Valmet 603 3-Wheeled Buncher

Item ID: 13155 Contact: Tom 800.315.9950 Ext. 604

‘10 Wood-Mizer LT-70 Item ID: 13250 Contact: Chris Woods 800.315.9950 Ext. 600

www.LBXonline.com

Corley Sawmill Machinery Tyrone Berry Carriage Drives Lewis Controls Optimization Carriage Linear & Set Shaft Lewis Controls “Electronics for sawmills by sawmillers” Tyrone-Berry Carriage Drives & Parts • Headrig Slabbers Log Turners • Bandmills & Linebar Resaw Systems Board & Gang Edgers • Trimmers

www.LBXonline.com

The Most Complete Line of Sawmill Machinery Since 1905!

running condition. Hard to find loaders equipped like this. AC and Heat inn Cab. Joystick controls. JD 6068T engine. Includes $600 in filters for complete servicing. - Item ID-13082 Tom 800.315.9950 x604 2007 Liebherr A924 Log Loader - Rubber Tired, 9300 hours. Good running condition. Hydraulic raising cab. Rotobec Grapple. Approx 42' reach.

- Item ID-13154 - Tom 800.315.9950 x604 2007 Liebherr A924B Wheeled Log Loader 10,100 hours. Very Good Condition. Liebherr makes the highest quality heavy equipment in the world.

This unit can go another 20,000 hours. 44' reach with over 7000 lb capacity at 40'. Hydraulic raising cab for 16' 8" operator eye level. Front blade for pushing or cleaning road debris. Grapple NOT included. Travels up to 12.5 mph with variable speed hydraulic transmission. Super smooth hydraulics make this a great wood yard machine. - Item ID-12503 Tom 800.315.9950 x604

Single Machine or Complete Turn-Key Operation More Production & Profit is Only One Call Away For Parts, Service & Sales

‘01 Timbco 820-D Forwarder Item ID: 13094 Contact: Tom Ph: 800-315-9950 x604

www.LBXonline.com 2007 Prentice 384 TMS Loader Package - 2384 t/a trailer mounted log loader Cummins 6-cyl engine. New injectors and pumps in Jan '13. New a/c installed, 32' length boom. 2006 John Evans trailer with 75% 1122.5 tires. Includes CTR Delimber. Condition is good - Item ID-12997 - Tom 800.315.9950 x604 2007 Tigercat 718E Feller Buncher - with 5000 Bunching Saw Head.

8900 hours. Very well maintained. Good running condition. Cummins engine. Tight and dry. 28L x 26 Tires at 50%. 1000 hours on rebuilt engine.

- Item ID-12989 - Tom 800.315.9950 x604 2007 Valmet/Komatsu

mfg

REduced

Call (423) 698-0284 CORLEY www.corleymfg.com • sales@corleymfg.com

Model 911 Extreme Harvester - Only 4000 hours on this special machine. Has new Log Max 6000 added in 2013.

Individual tracks on each hub allow this machine to climb where NO OTHER MACHINE can go! 4 New 700 tires and rims come with it for rubber tired operation. Recently gone through and updated. Very unique and hard to find a machine like this! Priced well below market. Sold new without head in 2008 for $575,000! - Item ID12571 - Tom 800.315.9950 x604 2008 CTR 450 Delimber - Like new. Used for less than 100 hours. Paint still on unit. Compare to new 450 at $34,000.

No description needed.

Consider like new. -

For Classifieds Call Your LBX REP at 1-800-315-9950

Item ID-12900 - Tom 800.315.9950 x604 2008 JD 2054 Log Loader - 15,000 total hours, but 9000 estimated working hours. New Undercarriage except for tracks. 34' live heel boom. Continuous rotation grapple. Cab Riser with tilt cab and guard.

- Item ID-12967 - Tom 800.315.9950 x604 2008 JD 2554 Loader w/Waratah 624 - 2008 John Deere Model 2554 Hi Rise tracked carrier with the Waratah Model 624 processing head.

8773 Hours. Cab riser.

Undercarriage at 60% as inspected by local dealer.

Currently running and producing over 20 loads/ day. - Item ID-13235 - Tom 800.315.9950 x604 2008 JD748 H Grapple Skidder - Good running June 2014 n 27

Jackson Shavings Mill REduced

‘99 Daewoo 220 Solar II

2005 Jackson Shaving Mill, Model: 16 4D Mill is powered by a 3-phase, 30 hp motor; Hydraulic powered by a 3-phase 30 hp motor; The box was upgraded for hydraulic in place of chain driven; Comes with 6-sets of knives.

Unit is in excellent condition! Comes with a Grizzly knife sharpener, conveyor, and forage box.

Forage Box

REduced

Conveyor

Item ID: 12795 Contact: Chris Woods 800.315.9950 Ext. 600

www.LBXonline.com machine. Used on job with three shifts so hours are 15,000. 43" flotation tires at 50%. Just finished going through shop. All functions working well. - Item ID28 n

13064 - Tom 800.315.9950 x604 2008 John Deere 344J Only 900 Hours!! Great running condition, z-bar, 3rd valve, ride control,

The Original Lumberman’s Exchange

Complete 3-Head Block Helle Sawmill

Priced to sell! See more photos online!

Item ID: 13122 Contact: Tom Ph: 800-315-9950 x604

www.LBXonline.com intake heater for cold weather starting, heat/ac, stereo - Item ID-13034 - Sam 800.315.9950 x603 2008 Ponsse Elephant Forwarder - Ponsse Elephant Forwarder with 18 ton capacity. 8 Wheeled with ONE set of tracks with machine. Hood guard.

11,400 hours, working today. Machine will have gone through professional shop and will be painted to look new prior to sale.

Has been professionally maintained. - Item ID-13163 - Tom 800.315.9950 x604 2008 Ponsse Ergo Harvester - Very clean unit with just 8600 hours. Equipped with the advanced Ponsse H-7 Head and C-4 Boom. One owner. Well maintained.

Tracks for bogies. Superior Value - Item ID-13060 - Tom 800.315.9950 x604 2008 Prentice 2210 Stationary Mount Loader - stationary electric; features joystick operation and 75hp electric motor; 440v. FOB: Georgia 8000 hours. Maintenance records available. Mill

11000 hours, has heat and air!

Daewoo inline 6 Engine 145hp.

Computer works for the stroker.

Tracks are around 11’. Stroke delimber is a Pro mark 50.

Designed under the timberline, and has a timberline head.

Has all maintenance records and extra parts! Great running machine! Location: Montana

Item ID: 12936 Contact: Chris Woods 800.315.9950 Ext. 600

www.LBXonline.com closed. Machine working well when mill ended operation. - Item ID-13017 Tom 800.315.9950 x604 2008 Prentice 2670 Feller Buncher - 2008 Prentice 2670 Cutter: 28L tires, SH56 hot saw head, 5.9 Cummins engine. - Item ID-13190 Sam 800.315.9950 x603 2008 Valmet 415 Harvester - Very nice machine.

5500 hours. Valmet 380 Processing head recently rebuilt and running good. 24" pads on 60% undercarriage. Heat and air work well. Sisu engine is stingy on fuel. - Item ID12866 - Tom 800.315.9950 x604 2010 CAT D9T with Chip Blade - Cat D9T Dozer with wood chip arrangement.

Back up Alarm. Product link; 27" tracks; 9SU Blade with edge group.

Oil change system. Rear counterweight. - Item ID13152 - Tom 800.315.9950 x604 2010 JD 848H Grapple Skidder - 5000 hours.

Running duals at this time. Powerful machine.

Everything working great.

Visit us online at www.LBXonline.com!

Real Tuff Baler&Baggertm ‘79 Timberjack 230 Forwarder

Save $$$ on Bedding—Bale it Yourself!

Electric or Diesel, Manual or Automatic

Manufactured by M & F Gauge & Specialty Co., Inc.

BUILT TO LAST www.realtuffbaler.com

Dear Prospective Customer,

Thank you for inquiring about our Real Tuff Baler! From baling wood shavings to aluminum cans, the Real Tuff Baler is built to last, and priced for a quick return on your investment!

Real Tuff Baler

Real Tuff Baler Dimensions & Specifications

• Easy to use

- (2) Hydraulic Cylinders are controlled by using a two spool valve

• Built of high quality materials and workmanship

Runs OK: Low Price!

- 30 H.P. motor (220/440 volt 3 phase) starter not included

• Heavy duty to enable a broad spectrum of baling options

Item ID: 13085 Contact: Tom Ph: 800-315-9950 x604

• Easily loads by conveyor or manual method

www.LBXonline.com Tires at 50% or better.

- Item ID-12800 - Tom 800.315.9950 x604 2010 John Deere 1110E Forwarder - Super Clean machine. 8 Wheeled. Only 5800 hours. One owner and well maintained. Hard to find them with low hours like this! - Item ID-12947 Tom 800.315.9950 x604 2010 Prentice 2280 TMS Loader Package - Super clean loader/delimber package on trailer. Just 4400 hours. Cummins engine. CTR delimber works great. AC/Heat/ Radio in cab. Engine runs great with no blow by.

Tight and dry. - Item ID12871 - Tom 800.315.9950 x604 2010 Prentice 2670 w/ Single Post Saw Head. Only 3199 hours. Cummins engine. 30.5 x 32 tires at 40%. Single post saw head.

Great Value! - Item ID-12552 - Tom 800.315.9950 x604 2010 Tigercat 630D Grapple Skidder - Super nice, 5589 hours. NEW

PO Box 693 Brownwood, Texas 76804 Phone: 325-641-8300 Fax: 325-643-3243

Item ID: 13057 Contact: Tom Ph: 800-315-9950 x604

www.LBXonline.com

‘89 Timberjack 380 Grapple Skidder Pulling Logs Now!

35.5 Firestones. Cummins engine. Dual Arch HD Grapple. Winch. Excellent condition. Runs great!

- Item ID-12738 - Tom 800.315.9950 x604 2010 Valmet/Timbco 445FXL w/Roy Saw Head HD Komatsu undercarriage at 50%. Just 5750 hours.

Many extras. Cold weather start. Deluxe heated seat.

GN Roy Hi-Speed Disc Saw head with 360 degree rotation. Fire Suppression Pkg. Very good condition.

Well maintained. - Item ID13023 - Tom 800.315.9950 x604 2010 Woodsman 440TL Tracked Chipper w/ Loader - ONLY 1700 hours.

Contractor finished job.

Operator controls entire operation from cab. 700

- 25 G.P.M. Pump - 50 Gallon reservoir capacity

. Easy to use

. Built of high quality materials and workmanship

- Only the highest quality industrial components are used

. Heavy Duty to enable a broad spectrum of baling options

. Easily loads by conveyor or manual method Most Popular Baler Sizes

Real Tuff Industries Real Ruff Baler Size 12” x 16” x 36” 12” x 16” x 32” 11” x 17” x 36” 8” x 18” x 36” 5” x 10” x 16” - Call For Price

Bale Size

Bales per Hour

50 - 60 bales per hour 50 - 60 bales per hour 50 - 60 bales per hour 50 - 60 bales per hour 50 - 60 bales per hour

4.0 cubic foot bale 3.5 cubic foot bale 3.9 cubic foot bale 3.0 cubic foot bale 0.4 cubic foot bale

Phone: (325) 641-8300 Fax: (325) 643-3243 . Custom baler’s can be manufactured to your specifications .

Real Tuff Baler Dimensions & Specifications Manufactured by M & F Gauge Specialty Co., Inc. 2 - Hydraulic& Cylinders are controlled by using a two spool valve 30 H.P. motor (220/440 volt 3 phase) starter not included PO Box 693 • Brownwood, Texas 76804 25 G.P.M. Pump 50 Gallon reservoir capacity Only the highest quality industrial components are used www.realtuffbaler.com

Item ID: 13143 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

Effective May 1, 2012

REAL TUFF INDUSTRIES

Cheap and Runs Good!

‘94 Barko 275B Loader Pkg.

$15,905

Real Tuff Baler Price: $12,997.00 Terms: 50% deposit upon receipt of purchase order. The blance is due upon completeion which will be approximately thirty days from placement of order. F.O.B. Brownwood.

HP Cummins engine. 50" mill. High flotation 36" triple grouser pads on 80% undercarriage. Super Package. Sold new at over $500,000. - Item ID-12665 Tom 800.315.9950 x604 2011 Built-Rite Model 60 Stationary Loader - Model 60 Built-Rite Stationary Electric Loader. New Condition with only 95 actual hours. The Model 60 has 18’ of reach and about 1,100 pounds of lift at full reach, with the grapple attached. The grapple is a ¼ cord, butt styled with gripping bars. It opens to 66” and is 20” wide.

This package includes everything from the power pack to the comfort cab with head and AC. If you have a loading challenge in your operation, this is an economical and quiet way

For Classifieds Call Your LBX REP at 1-800-315-9950

03/08

to handle it. - Item ID-12705 - Tom 800.315.9950 x604 2011 Case TR320 Tracked Skid Steer Mulcher - 2011 Case Skid Steer with mulching head and bucket.

Only 300 hours and in excellent condition. Skid Steer has Hi Flow option for maximum performance to head. - Item ID-13020 Tom 800.315.9950 x604 2011 JD 1010E 8-Wheeled Forwarder - Super Nice Machine! Just 2300 hours.

Owner downsizing. Comes with new set of tracks and set of chains. - Item ID12955 - Tom 800.315.9950 x604 2011 JD 748H Grapple Skidder - 4600 hours.

Good running skidder. 30.5 tires at 60% with dualing rings. Dual arch grapple.

Heat/AC. Well maintained.

- Item ID-13176 - Tom June 2014 n 29

“Built-Rite” 18scp Compact Firewood Processor

No other compact processor matches it!

Compare apples to apples with any small processor built and you will see why the 18SCP is #1 for the money!

• Available with the multi-wedge system for even size firewood • Capable of handling 22' logs (with opt. 4' feed trough ext.)

• Capable of cutting logs up to 20" dia. (with opt. 25" bar) • Fast 6-second cycle time • Integrated BR12 Conveyor available

“Built-Rite” Mfg. Corp.

750 East Hill Rd • Ludlow, VT 05149

1.800.757.2520 www.built-rite.com

800.315.9950 x604 2011 JD 848H Grapple Skidder - Just 3200 hours.

Excellent condition.

Running duals for high flotation. Dual Arch. Winch.

Comfort cab! - Item ID12801 - Tom 800.315.9950 x604 2011 Puma 612 Forwarder - under 4000 hours. The machine has the new Barko 612 cooling package update + some other minor repairs. Volvo 220HP engine is very fuel efficient.

12,000 lb capacity. Comfort cab. Kesla Loader and Supergrip grapple. Very good running condition - Item ID-13091 - Tom 800.315.9950 x604 2011 Puma 612 Forwarder - Has new cooling system installed along with other minor repairs. S/N = F6121004110414. 3600 30 n

hours. Volvo 200HP Tier III engine. Tires: 28L x 26 front; Nokian 710/45x26.5 rear. All at 70%. Front Blade; 12,000 lb. capacity.

Cab w/Heat and AC. Kesla Crane and Hultdins grapple. FOB: Rhinelander, WI. - Item ID-13092 - Tom 800.315.9950 x604 2011 Remanufactured KMC Tracked Grapple Skidder - Model #42 KMC Model 2500P ( Dual Arch Grapple) Track Skidder.

Cummins 6BTA (174 HP). - Clark 28000 Series Powershift Transmission.

John Deere Model 40 Winch (40,000 lb line pull). Hydraulic operated controlled Steering Differential. Planetary Final Drives. - ESCO Dual Arch Grapple. - Fully enclosed Hi-Vis Cab c/w Heater, Air Conditioning, Lights,

The Original Lumberman’s Exchange

New Price!

‘98 Peterbilt 378 • N-14, cummins, 18-spd, engine brake, air ride suspension, aluminum wheels, tandem axle, full locker, full gauge panel, loaded 7000 Serco log loader.... Asking $55,000

Contact Steve (563) 580-0383

WI

Swivel Suspension seat c/w Joystick Controls. - Pilot operated closed center Hydraulics. Sundstrand Sauer 45 Series Pump: - DanFoss Model L90LS 5 spool control valve New. KMC Wear Resistant Tracks & Sprockets .

Torsion Bar suspension.

Heavy Duty Cast Steel KMC Road/Idler Wheels.

Standard Decking Blade.

FOB: BC, Canada INCLUDES ONE YEAR LIMITED WARRANTY!! - Item ID12549 - Tom 800.315.9950 x604 2011 Valmet 430FXL w/ Keto 870TS Proc.

Head - 2011 Valmet 430FXL with Komatsu built undercarriage.

Includes KETO Model 870TS Processing Head.

Less than 3000 hours on total machine. Excellent condition. Head will have all updates according to owner. Compare to new at $600,000! - Item ID-13029 Tom 800.315.9950 x604 2012 Lamtrac 8400T Mulcher - just 25 demo hours. Full Factory Warranty remains.

Cummins 400HP engine.

Lamtrac known as best

‘98 Peterbilt 357 • C12 engine, 18-speed transmission, Full lockers, 7000 Cerco Loader .......... . ........... Asking $55,000

Contact Steve (563) 580-0383

WI

performing carrier on market. Great serviceability. Spacious operator's station. Spec sheet available at www. lamtrac.com - Item ID13272 - Tom 800.315.9950 x604 2012 Log Max 7000C Processing Head - Only 865 hours. Like new condition.

All components included such as Log Mate 402 computer and Super Grip handles. Ready to install on proper carrier. - Item ID13074 - Tom 800.315.9950 x604 2012 Refurbished FMC 210 Tracked Skidder - 1976 Model that has been totally refurbished in 2012. No hours since updates were done. Includes warranty on machine and tracks.

Detroit 6V53 engine with 195HP. Clark 28000 Powershift transmission.

Clark 40,000 lb Winch.

ROPS Cab. Includes bolt on grapple head with full function. New Paint.

- Item ID-12731 - Tom 800.315.9950 x604 2014 John Deere 548GIII Skidder - 60 Hours, still under factory warranty, way below dealer cost - Price Reduced! - Item ID-

Visit us online at www.LBXonline.com!

CLEEREMAN SAwMiLL MAChiNERy Your Most Profitable Sawmill Investment.

Why has Cleereman Sold Over 990 1000Carriages?

Carriages?

The answer is Simple...

CLEEREMAN

QUalITY & SerVICe!

Not just Carriages!

• Carriage Drives Hydrostatic & Electric • Bar Type Log Turners 2500 – 3500 lbs.

• airBag & HyDrauLiC CaBLe Tensioners • sawyers CaBs & ConTroL CaBs • CusTom maTeriaL HanDLing sysTems

12 ModELS

a CarrIage TO FIT YOUr OperaTIOn!

Patent Pending Pending Patent

LUMBER PRO

Heavy Duty Duty Double Double Cut Cut Band Band Mill Mill Heavy That is Sweeping the Industry.

That is Sweeping the Industry.

Reduces Manpower Manpower •• Reduces Adds Flexibility Flexibility from from 4/4 4/4 –– 12/4 12/4 Lumber, Lumber, •• Adds Beams, Cants, Cross Ties or Beams, Cants, Cross Ties or EVEN as as a a Resaw!

Resaw!

EVEN • Lower Initial Installation Cost Cost • Lower Initial Installation Unmatched Accuracy Accuracy •• Unmatched

All Machines Machines are are Cleereman Cleereman Quality Quality Throughout.

Throughout.

All You Get Get the the Best Best Machines Machines Backed Backed by by the the Top Top Service Service You in the the Industry Industry –– Call Call Cleereman Cleereman Today!

Today! in

info@cleereman.com info@cleereman.com www.cleereman.com www.cleereman.com

PHONE: 715-674-2700 715-674-2700 PHONE: FAX: 715-674-7002 715-674-7002 FAX:

5500 PINE PINE ST., ST., NEWALD, NEWALD, WI. WI. 54511 54511 5500

www.Cleereman.com For Classifieds Call Your LBX REP at 1-800-315-9950

June 2014 n 31

‘06 JD 648GIII Grapple Skidder Duals not included Item ID: 13088 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

Timberjack 230 Cable Skidder Item ID: 13144 Contact: Tom Ph: 800-315-9950 x604

www.LBXonline.com

13182 - Sam 800.315.9950 x603 210 Prentice Loader - 353 detroit. Runs and operates.

Has some leaks from sitting for years. Good bucket and pins. Includes trailer. - Item ID-13249 Chris 800.315.9950 x600 84 Eager Beaver Trailer - 9' wide by 48' long. Detached front, middle drop is 26 feet. Load from the front or back. Tires and brakes are 80% sand blasted painted, everything goes, chains, 32 n

binders, cones. Excellent condition. Located Southern NY. - Item ID13096 - Chris 800.315.9950 x600 Case 1150 Dozer - OROPS Cab; 6-way Angle blade, Hyster winch; Limb risers; Serviceable Undercarriage.

FOB: West Texas - Item ID13112 - Tom 800.315.9950 x604 Cat 518 Grapple/winch Skidder - Late 80's 4WD Drive; Cat winch, maintained machine.; 30.5

The Original Lumberman’s Exchange

x 32 Tires, 95% rubber.

130-hp, all pins are good.

- Item ID-12202 - Chris 800.315.9950 x600 Cat D5B Dozer - Cat D5B s/n 22X380, direct drive, EROPS, S-Dozer w/ tilt.; Limb risers; Hyster Winch, serviceable u/c - Item ID13113 - Tom 800.315.9950 x604 Dorsey Drop Deck Trailer - 45' Long. Heavy Duty Ramps. Good Michelin Tires. Currently in use and has carried (2) Cat 518

skidders with no problem - Item ID-12662 - Tom 800.315.9950 x604 Extec Shredder - Extec shredder. Please call Daren at Ext. 603 for more details.

- Item ID-12926 - Sam 800.315.9950 x603 2003 Franklin Skidder Model Q70-M31A, Enclosed Cab W/Heat & A/C, 28Lx26 Tires 85% Rear, 70% Front, 100 Hours On Dealer Rebuilt Transmission, 600 Hours On Cummins Recon Engine 6BTA 200 H.P. Excellent one owner machine! - Item ID-12152 Tom 800.315.9950 x604 JD 643D Saw Head FB Decent machine. Estimated 1993 model. S/n available for verification. Recent JD recon engine. Tires at 60%.

Cameco Saw Head. Needs new teeth. AC works.

Visit us online at www.LBXonline.com!

Introducing

THE BARTLETT B-ITCO BARTLETT INSERTED TOOTH CUT OFF

Specifically Designed To Save You TIME & MONEY! 3 Fits Most Popular Brands 3 Quickly Replaceable on Site 3 No More Shipping it to the saw shop 3 Can Be Sharpened on the Saw

‘99 Timbco 425 Valmet 500 Harvester Item ID: 13140 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

Running today. Priced to move. - Item ID-12845 - Tom 800.315.9950 x604 John Deere 540B Cable Skidder - Ring chains on front 90%, Ice Chains on rear 90%. Front tires @ 20%, rear tires @ 80%.

Power shift trans., open cab,stacker blade on front, 8 slides on cable, hydraulic lock out for easy winter starting! - Item ID-13268 Sam 800.315.9950 x603 Timberjack 230 Cable Skidder - Older Skidder with 18.4x26 tires. Detroit 3-53. All functions work.

Priced to sell. - Item ID13144 - Tom 800.315.9950 x604

PORTABLE SAWMILL

2010 Wood-Mizer LT-70 2000 hours, fully hydraulic, Debarker, auto clutch, lubemizer, trailer package, diesel engine, 18 foot roller discharge. Great condition!

- Item ID-13250 - Chris 800.315.9950 x600 Woodland K4 Industrial Portable Sawmill - vertical band with built in edger, includes two 38.5 Kubota Diesel engines, all hydraulic, Also has a 22' 3

If You’re Operation Utilizes Slasher/Cut-Off Saws in the Woods or at the Mill, Call Bartlett Today!

LOGGING SLASHER SAWS LOG MERCHANDISING SYS. FIREWOOD PROCESSORS

Bartlett's saw service and supply 800-566-0319

au t Bartlett’s Also Offers The Jones Saw Grinder for On-Site Sharpening!

Bartlett’s Saw – For All your Carbide & Wide Band Saw Supplies, Service & Sales

strand live deck w/ kicker and log turner. Machine is ready to go! - Item ID-13263 - Chris 800.315.9950 x600

RECYCLING EQUIPMENT

2006 W. S. M Brute Horizontal Grinder - 2006 West Salem Machinery Brute Horizontal Grinder; Model 3456HB. This is a tier 2 machine and meets all current California emission standards.

Equipped with a Cat 540 horse power C-15

EuroBit – The Finest Carbide Saw Bit Available

diesel engine. This unit has been serviced and well maintained. It has approximately 8700 hours.

The clutch and electronic brain have been recently replaced. Located in CA. Priced to sell!! - Item ID12691 - Tom 800.315.9950 x604 1987 Morbark 27 WCL NEEDS MOTOR - 1987 Morbark 27 WCL, Morbark 1000 Knuckle boom loader, 3 knife disc, Newer

For Classifieds Call Your LBX REP at 1-800-315-9950

621 US 41A Henderson, KY 42420 e-mail: bartlett@henderson.net Wide Band Saws In All Widths, Kerf, Length – Single & Double Cut

discharge chute, New banding around disc, Brakes and tires are also OK, Everything works well Newer clutch -- with outboard bearing, Had Cummins KTTA 750 HP engine -- needs repower - Item ID-12443 - Sam 800.315.9950 x603 2005 Morbark Model 2755 Flail/Chipper - S/N = Q78. Hours = 6500. Tires: 295/75R22.5. (Two) Cat engines: Model 3412 in June 2014 n 33

Vista

S” S O B E L G Up-Cut Saws “AN Your solution for: • Speed and accuracy • Safety—two-hand cycle control—non-exposed sawblade in its rest position-material is held firm by guard/ clamp assembly while cutting is performed • Ease of Operation

Call today and let the “ANGLE BOSS” help solve your production dilemmas!

• Mitering capability: Left & Right axis rotation of sawblade up to 75o from center • Also available bevel capacity: Blade can lay over to the left up to 45o from zero • From basic manual machines to fully CNC-controlled cut-off systems

Vista Machines Inc.

19 Monarch Street • Littlestown, PA 17340 Tel: (717)359-9212 • Fax: (717)359-4222 • www.angleboss.com

front with 860HP: Model 3406 in rear with 425HP. Originally came out as a 3 flail converted to a 2 flail debarker. Handles up to 30" whole trees. Set up for 2" chips. Recently came off job. Well maintained and in good condition. - Item ID12690 - Tom 800.315.9950 x604 2006 Morbark 6600 Horizontal Grinder Approx. 6000 hours on this well maintained machine. Has New Cat Dealer Rebuild 1000HP Engine at 5000 hours. 42" X 66-5/8" HAMMERMILL; VARIABLE SPEED INFEED SYSTEM; HAMMERMILL DRIVE INCLUDES ALL BELTS, SHEAVES, BUSHINGS & SHIELDS. ENGINE GAUGE PANEL & EMERGENCY SHUT DOWN 34 n

SYSTEM LOCATED IN AN ANTI-THEFT CONSOLE. ELECTRONIC RPM SENSOR & AUTO FEED SYSTEM. 430 GALLON FUEL TANK. 238 GALLON HYDRAULIC OIL TANK. IQAN CONTROL SYSTEM. DUST SUPPRESSION SYSTEM. HYD OPERATED DEBRIS CONTAINMENT DOOR. 16 FUNCTION RADIO REMOTE. SUPER PACKAGE! Optional new knife skin $20,000 which is half price of new. - Item ID-12692 Tom 800.315.9950 x604 2007 Bandit Model 3680 Beast Grinder - Only 780 confirmed working hours; 700HP C-18 CAT Engine; Twin Disc Hydraulic Clutch; Air Compressor; Reversible Fan; Remote Control; IQAN Controls; Magnetic head Pulley;

The Original Lumberman’s Exchange

1989 JD 540D Cable Skidder Item ID: 13146 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

Excellent condition!

- Item ID-12628 - Tom 800.315.9950 x604 2007 Fecon FTX440 w/ Fecon BH 350 Mulcher - Totally rebuilt in 2009

by Fecon with all 2009 updates. 1670 hours. Cat 440 HP Engine; Heavy Duty Winch; Triple grouser high flotation tracks; Excellent condition. Priced to sell!

- Item ID-12632 - Tom 800.315.9950 x604 2007 Lamtrac 6125 Tracked Mulcher - Purpose built.

125hp Cummins engine.

2300 hours. Purchased brand new in April 2012.

Tracks at 50%. Includes winch. Full protection comfort cab with AC/Heat.

Bradco mulching head.

Needs some work, but priced to move! - Item ID12909 - Tom 800.315.9950

2007 Liebherr A924 Log Loader Priced to Sell!

Item ID: 13154 Contact: Tom Ph: 800-315-9950 x604

www.LBXonline.com x604 2007 Morbark 2355 Flail Chip Harvester - Three knife, three flail machine.

New long block engine installed in September of 2011; About 5600 hrs on it now. Total hrs on the unit are approx 11,000.

Also, there is an extensive parts inventory and a knife grinding machine (with knives) that can be purchased separately with machine. A well maintained machine that was working well up to being shut down at end of job. - Item ID13134 - Tom 800.315.9950 x604 2007 Peterson Model 4800E Portable Debarker - Good running machine and very well maintained.

Visit us online at www.LBXonline.com!

Timber Harvesting Equipment

Hahn HFP160 Firewood Pro

Hahn Machinery Inc, P.O. Box 220 • Two Harbors, MN 55616 www.hahnmachinery.com

T

urn your loader into a self-propelled firewood processor capable of picking logs out of the pile and cutting and splitting them onto the ground or conveyor or into a trailer, truck or bin. Operated by one person seated in the comfort and safety of the loader’s cab, the HFP160 is designed for commercial firewood operations and, when compared to traditional mechanical firewood processing methods can: • • • • • • • •

Reduce manpower requirements Reduce work comp costs Reduces fuel consumption Improve safety Provide greater mobility Dramatically reduce set up time Reduce handling of the wood Lower your cost per cord for an improved bottom line

The standard HFP160 is equipped with a 4-way splitter head with hydraulic height adjustment and 16” and 20” cut lengths. Optional interchangable 6-way and 8-way splitter heads and longer cut lengths are available.

For the past 37 years, Hahn Machinery has been noted for offering simple, rugged, and productive forestry equipment and the HFP160 is no exception

For more information on the­— HFP160 Firewood Pro

1-800-483-8825 for complete details on this or any Hahn firewood processor or forestry equipment call or email info@hahnmachinery.com For Classifieds Call Your LBX REP at 1-800-315-9950

June 2014 n 35

The Rascal H.A.W.G. Ideal to Grind: Construction Waste • Stumps • Land Clearing Green Waste • Asphalt Shingles • Palm • Pallets Difficult & Dirty Materials Simplicity Mastered Ease of Operation with Less Downtime Change Particle Size While You Grind

Universal Refiner Corporation P. O. Box 151 • Montesano, WA 98563

800-277-8068 36 n

The Original Lumberman’s Exchange

Visit us online at www.LBXonline.com!

‘04 JD 648GIII S/A Skidder New

Item ID: 13087 Tires Contact: Tom Ph: 800-315-9950 x604

www.LBXonline.com

Timberjack 230 Cable Skidder Item ID: 13144 Contact: Tom Ph: 800-315-9950 x604

www.LBXonline.com

9950 hours approximately.

CAT 3306 Engine. $40,000 in recent maintenance with records from owner.

Great unit for making clean chips. - Item ID-12941 - Tom 800.315.9950 x604 2010 Fecon FTX440 w/ Fecon Model BH350 Mulching Head - Only 750 hours; Cat 440HP engine; Heavy Duty Winch; Triple grouser high flotation pads at 95%. Like New! - Item ID12633 - Tom 800.315.9950 x604 2011 Fecon FTX100 w/ a BH74ssv mulcher head 233 Hours. Comfort cab with Heat/AC. 100HP Cummins engine. Total mulching package.

Includes Fecon BH74 mulching head with 6' cutting width. Priced well below dealer cost.

- Item ID-12675 - Tom 800.315.9950 x604 2012 Rayco Tracked Mulcher - 100hp Kubota Engine. Only 1450 hours.

90% track life remaining S/n available. Great running condition. Owner leaving business. - Item ID12908 - Tom 800.315.9950 x604 Morbark 1200 Tub Grinder - Powered by a 3412 Cat engine, 600-hp. Tilt tub.

Hours are unknown. Please call Daren at Ext. 603 for more details. - Item ID12919 - Sam 800.315.9950 x603

ROLLING STOCK

2005 Kenworth T-800 with Rotobec MT27 Loader One Owner Truck, 110,000 miles, 8LL Trans, 46,000 lb rears, Full locking rears, Factory double frame,

430hp engine - Item ID12612 - Sam 800.315.9950 x603

SAWMILL

1984 Lane Model 8400 Saw Mill - Heavy duty four 14’ (4) head table w/ a top saw. Silvatech Set works and has 45-50 foot of track frame. Surprisingly good condition! Great Value at this price!! - Item ID-12689 Tom 800.315.9950 x604 2007 Woodmizer LT 40 - Portable sawmill non hydraulic. It has power feed, power up, power down. The mill is like new with under 220 hours. It cuts perfectly!! It has lots of extras, and 30 blades.

- Item ID-13253 - Sam 800.315.9950 x603 Cleereman model 40- 3 knee - Right hand Includes track and controls. Electric over

For Classifieds Call Your LBX REP at 1-800-315-9950

air setworks. - Item ID-13240 - Chris 800.315.9950 x600 Woodmizer LT40 Sawmill - 199 hours on machine and motor. 25 hp Kolher gas engine. 500 dollars worth of extra bands included! Sawmill is stored undercover - Item ID-13266 - Sam 800.315.9950 x603

SHAVING EQUIPMENT

2005 Jackson 16 4D Shaving Mill - Mill is powered by a 3-phase, 30 hp motor; Hydraulic powered by a 3-phase 30 hp motor; The box was upgraded for hydraulic in place of chain driven; Comes with 6 sets of knives This unit is in excellent condition!

Comes with a Grizzly knife sharpener, conveyor and forage box - Item ID-12796 Chris 800.315.9950 x600 June 2014 n 37

June 2014

Bandit Industries Named Pole Day Sponsor at Michigan Int'l Speedway for 2014 Nascar Events

M

ichigan International Speedway is proud to partner with Bandit Industries— another Michigan-based company—to bring fans the Bandit Chippers Pole Day on Friday, June 13 and Friday, Aug. 15.

NASCAR’s new qualifying format in 2014 has added excitement to the weekend as drivers and teams compete against each other and the clock to post the fastest time.

The new format is concise, competitive and compelling as drivers battle to advance to the next round.

Fans at MIS will experience three rounds of qualifying on Friday as part of the Bandit Chippers Pole Day. In the first session, all the drivers will be on the track in a 25-minute segment to earn the right to advance. The top 24 times advance to a 10-minute segment. Finally, in the final fiveminute session the drivers with the top 12 times from the second segment will battle to start on the pole.

“Qualifying has been exciting in 2014 and I cannot wait to see the drivers compete on Bandit Chippers Pole Day at MIS,” track President Roger Curtis said. “It is exciting to partner with another great Michigan company who shares our motto of giving back to their customers. We are looking forward to fans enjoying the new qualifying format.”

Bandit is a proud, Michigan-based manufacturer of wood processing equipment that has nearly doubled its sales volume and workforce over the past few years using Michigan talent. The partnership with Michigan International Speedway allows Bandit to broaden its involvement in racing and the opportunity to entertain its customers at NASCAR’s fastest track.

“We are very proud to be a successful Michigan manufacturer supporting our local track in the greatest spectator motorsport there is, NASCAR,” Bandit’s NASCAR Marketing Manager and Communications Director Chris Smith said. “This great state of ours has taken some punches in the last few years, but the people here are as strong 38 n

Press Releases and as dedicated as ever. We want to show the world that Michigan still knows a thing or two about manufacturing. It’s a great place to work, a great place to live, and of course it’s the best place to go racing.”

Nestled in the lush Irish Hills of Southeastern Michigan, Michigan International Speedway is the Great Escape, a venerable NASCAR national park where fans can get away and enjoy the very best in racing and camaraderie. It’s the love of racing and the thrill of a great time for race fans and drivers alike.

Tickets are on sale at http://www.

MISpeedway.com or by phone at 800-3541010.

Keep up with Michigan International Speedway via Twitter @MISpeedway or on Facebook at www.facebook.com/ MISpeedway. Android and iPhone can now download Discover MIS, the official app of MIS, on Google Play and iTunes.

Follow Bandit Industries on Twitter @ BanditChippers or on Facebook at www. facebook.com/BanditIndustries. Join our Mobile Fan Club by texting MISCLUB on a Sprint Handheld or other mobile device to 69050. Standard text message rates may apply.

Fecon Introduces Multi-Purpose EX60 Utility Track Vehicle

F

econ is proud to introduce the FTX128L Mulching tractor as the newest member of the Fecon FTX Tracked carrier line. Built in their Lebanon, OH facility this new tractor is strong on cutting power with 60 GPM to the Bull Hog Forestry Mulcher.

The compact FTX128L features 20 inch tracks that work effortlessly while cutting up hill. The low ground pressure at 3.8 psi is ideal for soft conditions

The Original Lumberman’s Exchange

resulting in minimal ground disturbance.

Serviceability is made easy with full access side doors and engine compartment roof.

The Cummins QSB4.5 diesel engine running at 128 hp coupled with Fecon’s latest hydraulic technology allows the FTX128L to outperform machines with higher horsepower. Fuel consumption remains under 4.5 gallon per hour.

High Performance on the jobsite, at maintenance time and on the bottom line makes the FTX128L the machine of choice for ROW Mulching, Clearing and related Forestry and Urban Interface work.

If you would like more information about Fecon or the EX60 please call Courtney Shafer at 513-696-4430 or e-mail at cshafer@fecon.com.

Exhibit Sales Begin For 2015 Forest Products EXPO

C

ompanies are lining up to select their preferences for exhibit space at EXPO 2015 – the 33rd Forest Products Machinery & Equipment Exposition – to be held June 10-12 at Atlanta’s Georgia World Congress Center.

Exhibitor sales kits have been mailed to nearly 1,000 contacts in the wood products industry.

Sponsored and conducted by the Southern Forest Products Association (SFPA) since 1950, this event has traditionally included many of the biggest names in the business displaying everything from sawmill machinery to materials handling equipment, attracting key representatives from the nation’s largest wood products manufacturers.

“The new, larger floor plan is generating increased interest in our event,” reports SFPA’s exposition director Eric Gee. “And the addition of an outdoor exhibit and demonstration area will provide opportunities for more companies to participate,” he adds.

Visit us online at www.LBXonline.com!

June 2014 - Cont'd Many exhibitors from the 2013 show have already expressed plans to expand their displays for the 2015 event. With indications of a housing market turnaround finally taking a firm hold, next year’s Expo is the best place to be for companies wanting to showcase equipment, products and services for the wood industry. Expo 2013 featured 154 exhibitors, with a total attendance of nearly 2,000.

For more information about EXPO 2015, visit www.sfpaexpo.com. To receive a sales kit and exhibit space application, contact Eric Gee at 504/443-4464 (option 3), or e-mail him at egee@sfpa.org. Follow the show on Twitter: @forestprodexpo.

Morbark Acquires Boxer Equipment A Line of Compact Utility Loaders

S

ince acquiring the BoxerÂŽ Equipment line of compact utility loaders from Mertz Manufacturing, LLC, at the end of 2012, Morbark, Inc., continues to aggressively expand its distributor network domestically and internationally.

Boxer Equipment signed several in the past eight months. Please visit our web site at http://www.morbark.com/press-releases/ morbark-expands-boxer-equipmentdistributor-network/ to view a listing of distributors and a printer-friendly version of this press release.

Direct Edge Inc, Encon Equipment LLC and Savannah Equipment Specialists are also authorized Morbark tree care equipment dealers; while Goodfellow Corporation, James River Equipment and Roman S.A. carry both Morbark's tree care and industrial equipment product lines; and Cardinal Equipment is an authorized industrial dealer for Morbark.

A.E. Sales, Inc., Bob McClelland Sales Company and D.E. Smith Company have signed Manufacturer's Representative Agreements with Morbark to promote the Boxer line. A.E. Sales, Inc., will recruit sales

For Classifieds Call Your LBX REP at 1-800-315-9950

Press Releases to rental companies throughout the entire country of Canada; while Bob McClelland Sales Company's area of responsibility covers Missouri, Iowa, Nebraska, Kansas, North Dakota, South Dakota, Minnesota and southern Illinois; and D.E. Smith Company is responsible for promoting the line in Ohio, Indiana, Kentucky and Michigan, excluding Isabella County.

"We're quickly expanding our Boxer distributor network around the world, adding companies that will give our customers the same high-quality service they know and expect from Morbark," said Mark Rau, Morbark Dealer Development Manager. "The Boxer product line has been a great addition to our equipment portfolio, and we're pleased to see so many companies interested in representing Boxer equipment."

Visit www.morbark.com, "Like" us on Facebook, follow us on Twitter or subscribe to our YouTube channel.

June 2014 n 39

The Lumberman’s Exchange Post Office Box 1916 Columbia, Tennessee 38402

PRSRT STD. U.S. Postage PAID Permit No. 212 Pulaski, TN

Superior finished product control for biomass fuel, colored mulch, animal bedding, and other wood fiber commodities.

  

Electric or Diesel 150 - 875 Horsepower Portable, Stationary, or Track

Trust your wood fiber resources to the “Perfect In One Pass” TM advantage.

-66 B k c lly Tra t Do w r e o N sp ran T with

Rotochopper, Inc. | 217 West Street | St. Martin, MN 56376