May 2014
Since 1986 - The Original (800) 315-9950 or (615) 349-1890
Loggers • Sawmills • Pallet Manufacturers • Wood Recycling Equipment
DealS of the Month '01 Timbco 820D Forwarder
Item ID: 13217 Contact: Chris ext. 600
'06 Peterbuilt Log Truck
Super Clean Truck! Item ID: 13018 Contact: Tom ext. 604
‘95 JD 693D Crawler Buncher
Item ID: 13206 Contact: Sam ext. 603
For classifieds call (800) 315-9950 or (615) 349-1890 or
í
With your smart phone: Scan QR Code to visit—
www.LBXonline.com
Tracy Gordon owner of Gordon LumTracy owner of Gordon LumberingGordon purchased a Log Max 7000XT. bering purchased Log Maxabout 7000XT. We asked Tracy hisathoughts We asked Tracy about his new Log Max:his “I thoughts am looking for
Tracy Gordon owner of Gordon Lum-
his new Log Max:that “I am looking for reason is one
savings and bering purchased a fuel Log Max 7000XT.
fuel is one We asked Tracy his thoughts about and that why savings I, absolutely, wanted a reason Log Max his new Log Max: “I am looking for why I, absolutely,
a Log Max head. I looked atwanted a Log Max 6000 fuel savings and that is one reason head. I looked at a LogaMax but needed something little6000 bigger why I, absolutely, wanted a Log Max
but needed little bigger head. I looked at a which Log Max is6000 why something I chose thea7000XT. This but needed something a little which is bigger why I
chose thefor 7000XT. head is a good match mixedThis and which is why I chose the 7000XT. This head is a good match for mixed and heavy hardwoods in our area. Everyhead is a good match for mixed and
heavy hardwoods in our area. smoothly and I Everywas
hasEverygone heavy hardwoods inthing our area.
W TollW
thing has gone thing has gone smoothly and I well was treated by
smoothly and I was everyone involved.” Western Canada treated well by everyone involved.” Toll Free 1.800.666.4474 From right to left, Dane Caton, operator, Tracy Gordon, treated well by everyone involved.”
From right to left, Dane Caton, operator, Tracy Gordon, owner, and Baker, salesman, of Strong, From right to Gary left, Dane operator, Tracy Maine. Gordon, owner, and Gary Baker, salesman, ofCaton, Strong, Maine.
Toll
USA
P P
learn more about what Log Max Ph. 360.699.7300 To learn more aboutTo what Log Max owner,Scan and Gary Baker, salesman, of Strong, Maine. Scan this QR code withthis QR code with your smartphone your smartphone barcode reader Scan app to this QR code with barcode reader app to see a video on ayour Log smartphone see Max 7000XT Fixed a video on a Log barcode reader app to Head processing hard-7000XT Fixed Max see a processing video on a Log woods on a Timber Pro Head hard725 Track Machine Max 7000XT Fixed
woods on a Timber Pro Head processing hard725 Track Machine woods on a Timber Pro 725 Track Machine
To learn more what Log Max can do for you contact your can dolocal for youabout contact your local Eastern Canada Ph.your 506.869.2325 dealer today. can do for you contact local dealer today. dealer today.
www.LogMax.com
www.LogMax.com 2 n
The Original Lumberman’s Exchange
E EP
P
www. www.
Visit us online at www.LBXonline.com!
PALLET STOCK, STUDS, I-JOISTS, STRUCTURAL COMPONENTS THE L-M SAWS, WILL TAKE YOU TO THE NEXT LEVEL! Leading the industry in bundle cross cut systems since 1957! New Design! New Technology!
Portable Yard Saw
Model 200MP-7-SS Gas Model 100MP-7-SS Electric 3 inch side shift, a standard feature
Traveling Arch Saw
Hydraulically controlled No manual cutting Our most popular turn key system
The New L-M “I-CUT” Bundle cross cut system!
* 60’ long frame to precision cut your I-Joists * Precision accuracy of +- 1/32” * Shorter system are available to process all your cutting needs * Tremendous labor savings, Guaranteed!
L-M Deck Cut Off Saw 3 foot to 12 foot bar lengths Hydraulically controlled
Automatic Strapping System Attach bottom crossers Side squeeze incorporated Polyester strap
Flush End Bump Rollcase
Reduce or eliminate your end trims
The Verticut P4 System now offers scan and cut technology, reducing operator error by using a bar code system!
Visit our web site www.LMSaws.com to see our complete product line and videos!
L-M Equipment Co. Ltd
Phone: 604-431-8800 Toll Free: 1-800-455-8807 Web Site: www.LMSaws.com E-Mail: Sales@LMSaws.com For Classifieds Call Your LBX REP at 1-800-315-9950
May 2014 n 3
CLEEREMAN SAwMiLL MAChiNERy Your Most Profitable Sawmill Investment.
Why has Cleereman Sold Over 990 1000Carriages? Carriages? The answer is Simple...
CLEEREMAN
QUalITY & SerVICe!
Not just Carriages! • Carriage Drives Hydrostatic & Electric • Bar Type Log Turners 2500 – 3500 lbs. • airBag & HyDrauLiC CaBLe Tensioners • sawyers CaBs & ConTroL CaBs • CusTom maTeriaL HanDLing sysTems
12 ModELS
a CarrIage TO FIT YOUr OperaTIOn!
Patent Pending Pending Patent
LUMBER PRO
Heavy Duty Duty Double Double Cut Cut Band Band Mill Mill Heavy That is Sweeping the Industry. That is Sweeping the Industry. Reduces Manpower Manpower •• Reduces Adds Flexibility Flexibility from from 4/4 4/4 –– 12/4 12/4 Lumber, Lumber, •• Adds Beams, Cants, Cross Ties or Beams, Cants, Cross Ties or EVEN as as a a Resaw! Resaw! EVEN • Lower Initial Installation Cost Cost • Lower Initial Installation Unmatched Accuracy Accuracy •• Unmatched
All Machines Machines are are Cleereman Cleereman Quality Quality Throughout. Throughout. All You Get Get the the Best Best Machines Machines Backed Backed by by the the Top Top Service Service You in the the Industry Industry –– Call Call Cleereman Cleereman Today! Today! in
info@cleereman.com info@cleereman.com www.cleereman.com www.cleereman.com
PHONE: 715-674-2700 715-674-2700 PHONE: FAX: 715-674-7002 715-674-7002 FAX:
5500 PINE PINE ST., ST., NEWALD, NEWALD, WI. WI. 54511 54511 5500
www.Cleereman.com 4 n
The Original Lumberman’s Exchange
Visit us online at www.LBXonline.com!
The
Original
Lumberman’s Exchange Your #1 Source for Forest Industry Products! The Lumberman’s Exchange is published monthly and is circulated internationally to sawmills, loggers, pallet makers, recyclers and industrial woodworking plants. Publisher Woods Publishing Advertising Sales Morris Woods (615) 349-1890 morris@LBXonline.com Design Director Heninger & Associates lbxonline@comcast.net Equipment Reps Equipment Representative Tom Hirt (800) 315-9950 x604 Equipment Representative Sam Wall (800) 315-9950 x603 Mailing Address P.O. Box 1916 Columbia, TN 38402-1916 (615) 349-1890 Phone (931) 233-0802 Fax Ad Submissions May be sent to— LBXonline@comcast.net Postmaster Send address changes to: Lumberman’s Exchange P.O. Box 1916 Columbia, TN 38402 The Original Lumberman’s Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers the Lumberman’s Exchange, its principles and associates are not held liable for errors or omissions. Reproduction in whole or part prohibited without written consent. ©2014 by Woods Publishing.
** Auctions ** Jm wood — Page 9
www.jmwood.com
Forestry Auction • June 4th & 5th
Montgomery, Alabama
For Classifieds Call 800.315.9950 See pictures, prices, and Location of all equipment at www.LBXonline.com BAGGER 2011 Real Tuff Baler, Forage box
James G. Murphy Co. — Page 11
& Conveyor - powered by a 36-hp
www.murphyauction.com
Yenmar with conveyor. Up to 60
Westerlund Log Handlers 12 Noon, Monday, May 12
square bales an hour! Is in mint
Call for Location
** Calendar **
Northeastern Forest Products Equipment EXPO Coming May 9–10, 2014 Essex Junction, Vermont
The Richmond Show EXPO RICHMOND 2014
May 16–17, 2014Virginia RichmondComing Raceway Complex * Richmond, until 5:00p.m. Virginia FridayRaceway May 16th 9:00a.m. Richmond Complex, Richmond, and for details Saturday MaySee 17, page 2014 36 9:00a.m. until 3:00p.m. The 34th East Coast Sawmill and Logging Equipment Exposition
Forest Products Machinery & Equipment Exposition
Coming...
See page 39 for details
Your Show Mark your Calendar Your Business for 2015
purchasing decisions to improve the efficiency - and profitability will be 2014’s largest collection ofJune sawmill, logging, biomass, 10-12, 2015 - of your operation. Don’t miss this opportunity to invest in your pallet and related manufacturing equipment, supplies and services Atlanta’s Georgiacompanies World Congress Center future. Please fill out and return the pre-registration form below in the Eastern United States. Nearly 300 exhibiting to the exposition office by April 1, 2014. Confirmations will be and thousands of forest products industry people will convene for mailed to all pre-registered individuals no later than May 4, 2014. the 34th Richmond Show. The newest and most advanced Expo 2015 is your first-class marketplace to will reachbeaon qualityThere audience top to attend the exposition if you pre-register; machinery, equipment and technology in the industry is noofcharge executivesmachinery from around display. management There will be and acrespurchasing of active hands-on and the there will be a $10.00 charge for those who register on-site. For equipment demonstrations outside, plus hundreds of indoor further information, please call (804) 737-5625. globe. Every two years, the wood products industry displays of new products, methods, technology and trends. here toproducts showcaseor services before making your Examinecomes and compare
Your Success
** INFO LINK **
state-of-the-art equipment, technology and services.
E X P O RICHMOND 2014
Co-sponsored by Virginia Polytechnic Institute & State University Cooperative Extension and Virginia Forest Products Association
Sign up today Returnfor by April 1, 2014 to: EXPO RICHMOND 2014 • P. O. Box 160 • Sandston, VA 23150-0160 ACE IHM Enterprise. ................. 11 LogMax. ........................................ 2 Please fill out completely and legibly. Incomplete or illegible forms can not be processed. prime exhibit space Only industry personnel should complete this form. Please copy this form for additional registrants. Spouses and children under 18 receive passes at the entrance gate will allowGauge. them to enter the exposition free of charge. 34 AJD Products................. 31whichM&F ................................ at theForest industry’s will premier event. Your Name: Nickname: Amark......................................... 20 Menominee Saw........................ 35 Complete show facts at SFPAexpo.com Company: Title: Contact Eric GeeInc.. • egee@sfpa.org B & B Mfg................................... 22 Metal Detector, .................. 27 Address: B.City: H. Payne................................. 28 MidwestZIP: Sharpening Service... 33 State: SFPAexpo.com Baker........................................ 1, 7 Multitek...................................... 18 Telephone: FAX: E-mail: Country (if not USA): Saw Shop....................... 14 Bartlett Saw Service........... 21, 37 Piper’s PLEASE CHECK ALL CLASSIFICATIONS OF INTEREST: -- (You must check at least one) Blockbuster............................... 35 Precision 24 G Sawmilling G Logging G Pallet Production/Recycling G Dealer Sales Sharpening............... G Paper/Pulp G Equipment Manufacturer G Plywood/Panel G Other (Please Specify) : Buck Equipment (AIM) . .......... Releases........................ 38 Pre-registration allows entrance to the Exposition (May 1628 - 17, 2014,Press 9am-5pm) at no charge. On-site registration is $10.00. Exhibitors: Please do not use this form. Contact show office for exhibitor registration information. Built-Rite.................................... Resource Recovery................... 26 Additional information is available13 on the Internet at www.exporichmond.com Cleereman.................................... 4 Thursday, Richmond EXPO..................... 36 Educational Course May 15, 2014 Two half-day workshops will be held on Thursday, May 15, 2014 on “Improving The Quality of Lumber Drying” and “Financial Management for40 Forest Concept Products..................... 29 Rotochopper. .......................... Products Business” at the Four Points by Sheraton. Lumber drying operations, no matter the size, must provide a good quality product to maintain their customer base. Drying defects not Boot........................ only lead to product value losses but if passed onto the customer can lead to lost sales. The morning workshop is designed Connecticut 6 Row Electric.............................. 20 to assist anyone drying lumber from the small-scale lumber dryer to commercial drying operations. The techniques and information presented are relevant to bothCord hardwood and softwood lumber drying operations. A good understanding of financial management is critical to manage and control the business. Master. ................................ 8 Sawmill Exchange..................... 16 During the afternoon session, participants will start with a business simulation that will help you to understand financial statements including specific terminology. Participants will also learn to analyze financial statements34 uncovering current problems or discovering potential business opportunities. Corley Mfg. . ................................ Sering Sawmill........................... 13 For registration information ONLY FOR THE SEMINAR, contact Angie Riegel at the Department of Wood Science and Forest Products at Virginia Tech; Telephone: (540) Metalworks. 231-7107; fax: (540) 231-8868; e-mail: ariegel@vt.edu Note: Angie Riegel provides registration information ONLY for the seminar - NOT CRD ....................... 10 Southern Forest EXPO........... 39 for the exposition. You must register for the each event separately. CW Mill....................................... 19 Timberwolf Mfg. Corp................ 7 Hahn Machinery........................ 25 Truck & Trailer World.............. 17 JM Wood Auction..................... 9 Universal Refiner...................... 12 James G. Murphy Auction..... 11 U.S. Blades................................. 23 Kasco-Sharp Tech..................... 16 Vista Machine............................ 33 Kilgore Saw................................ 27 Weaver Electric......................... 32 Lignomat.................................... 31 Wood-Mizer................................ 15 LM Equipment, Canada.............. 3
For Classifieds Call Your LBX REP at 1-800-315-9950
condition! - Item ID-12795 - Chris 800.315.9950 x600
CARRIAGES & DRIVES
2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage with onboard log turners, carriage drive, hyd pac for carriage, sawyers cab, computer controls, cabinet with electronic drives for carriage knees, husk including 48” bottom saw and 36” top saw (2 spare 48” blades and 1 spare 36” blade), short pop-up transfer to edger, belted rollcase to clear slabs and cuts from sawline, log stop and loader to drop logs onto carriage, heavy duty log turner under log stop and loader to deal with big logs onto carriage and track and frame. Significant new spare parts to be negotiated separately. - Item ID-13198 - Sam 800.315.9950 x603 Manual Four Head Block - Mounted on all steel carriage. Husk. Manual Pulleys on Bearing . Parts Book and where to order included. - Item ID12846 - Tom 800.315.9950 x604
CHIPPERS
Precision 58 Chip Pac - single chute loading system - Item ID-12764 - Sam 800.315.9950 x603 2006 Morbark 18 Hurricane Chipper w/Loader - Good running portable chipper equipped with loader. JD 6068 engine with 250HP. Hydraulic swivel Discharge Chute; Tandem axle package, Hydraulic rear stabilizer, large hydraulic tank, loader platform with chair, loader. The chipper has been recently serviced by a certified Morbark dealer who installed new blades and anvils. The machine also has
May 2014 n 5
❑ Please Remove
Zip
Equipment Representatives
❑ Please Change
State
Call us today for all your used equipment needs!
free equipment listings! Call – (800) 315-9950
DealS for the Month -April'08 Cordking #44
Workboots
Best Prices in the USA
Call with model number, size, and width for a FREE Price Quote!
(888) 438-5411 2 new tires. - Item ID-12964 - Tom 800.315.9950 x604 2007 Morbark 22 RXL 1000HP Chipper - 8000 hrs. Cummins
City
Refurbished, Inspected by Cordking Item ID: 13167 Contact: Chris ext. 600
'07 Liebherr A924 Log Loader
1000 HP Engine runs strong. Just replaced feed tray, end spout, belly liners, hood liners, and one pump. Machine overall is in very good condition. S/N 2043. DISCHARGE SYSTEM: Dirt separator with deflector Hydraulic swivel/telescoping discharge
6 n
chipping capacity, 75” diameter four-knife chipper disc with Left Hand rotation Chip sizes: 5/8”, 3/4”, 7/8”, 1”, 1-1/4”, 2”. Hydraulic
Phone
chipper hood for easy knife access.
✁
P.O. Box 1916 Columbia, TN 38402
*Company name and address required to process your change.
Address
Individual Name
Chris Woods, Owner Phone: 800-315-9950 Ext. 600
The Original Lumberman’s Exchange
Company Name*
If you need to Change your Address or Add Your Name to our mailing list, then please complete this form and mail to:
❑ Please Add
spout. CHIPPER: 22” diameter
Priced to Sell! Item ID: 13154 Contact: Tom ext. 604
‘99 CAT 525B Grapple Skidder
30 ft. x 10 ft CAT chain infeed bed. Enclosed weatherized operators’ cab is mounted on rubber shock absorbers with combination air conditioner/heater. Tilts hydraulically for transport. Sixway adjustable seat and joystick controls. Morbark 1000 knuckle boom loader, 25 ft reach, 210 degree swing. By-pass grapple.
Tom Hirt Phone: 800-315-9950 Ext. 604
Lift capacity of 20,000 lbs. at 10 ft. OPTIONS: reversing fan, twin disc clutch; Electronic RPM sensor with
Location: Missouri Item ID: 12618 Contact: Sam ext. 603
For classifieds call (800) 315-9950 or (615) 349-1890 or
í
James Sam Wall Phone: 800-315-9950 Ext. 603
The Original Lumberman’s Exchange
With your smart phone: Scan QR Code to visit—
www.LBXonline.com
automatic back feed; 11 hp Quincy air compressor; Pre lube on engine while starting. - Item ID-12449 - Tom 800.315.9950 x604 2008 Dynamic 585 Cone Head Chipper - S/N 5019. John Deere 500 HP engine. Only 861 hours. New knives and anvils. Wear liners, discharge chute, fan blades on drum have all been updated and replaced approximately 200 hours ago. Hand held remote control. Triple chain feed deck. Produces
Visit us online at www.LBXonline.com!
high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. - Item ID-12694 - Tom 800.315.9950 x604
COMPLETE SAWMILLS
Complete 3 head block Helle Sawmill - 100hp electric motor, run by Omen Cummins Generator set, Two stand automatic Log Deck, 3
over $10,000. Will include 20’ of 2
4 strand roof top chain, New
the best valued log splitter. Handles
saw Cedar Creek Vertical Edger,
strand kant Green Chain. - Item ID-
gearbox drive - Item ID-13199 - Sam
logs up to 32”. Uses 13HP Honda
complete cost $12000. Palllet
13122 - Tom 800.315.9950 x604
800.315.9950 x603
motor. Manual start but electronic
Board resaw system, 2 roto phase
Forest-All Mill - Forest-All Sawmill,
Go Fast Deduster 2 head Go Fast
circle saw - Item ID-12762 - Sam
Morbark C-16 Debarkers - 75 HP
Uses 4-way wedge adjustable to
Resaw with complete automatic run
800.315.9950 x603
Motor, 24’ Outfeed Hourglass Rolls
single two way. Great Value! PA -
- Item ID-13193 - Sam 800.315.9950
Item ID-12062 - Tom 800.315.9950
x603
x604
DEBARKERS
option is available. Has Log Lift.
around system. Omen Cummings
CONVEYORS
Generator New Condition, Green
Mellott 3 Strand Lumber)
Chain Round Table, Manual Chop
Conveyors Decks (Log - (2) Mellott
EDGERS & GANGS
saw, rotating board stacker, all
log decks, 3 strand, (1)22’ 6” long,
Cornell 636 edger - with dual tailers,
- 60HP John Deere engine. Two
under roof. Excellent Condition.
51 3/4” high (1)27’ long, 74” high
5 hp hydraulic pack for set works.
chain hydraulic powered conveyor.
Thomas Ind. Computer Set Works
$7500.00 ea. - Item ID-13200 - Sam
Good condition - Item ID-13239 -
Very good running condition.
Cost $10000. Saw Dust Conveyer,
800.315.9950 x603
Chris 800.315.9950 x600
Can produce up to 2 cords/hour
saw dust box, 2- 56 inch inserted
Hill Top 4 Strand Lumber)
Tooth Saws, 2 Roto Phases, 3 Phase
Conveyors Decks (Log - Hill Top
Best Value Portable Log Splitter -
- Item ID-12792 - Tom 800.315.9950
480 Electric Boxes complete cost
lumber transfer deck, 37’ long,
Small manufacturer in PA has made
x604
FIREWOOD PROCESSORS
For Classifieds Call Your LBX REP at 1-800-315-9950
Chomper Firewood Processor
according to owner. Priced to sell.
May 2014 n 7
n uctio e d o r anc est P High t Mainten !! s d! Lowe rantee Gua
Trailer:
Tandem axle, 8’6” wide, 22’-30’ long, 11’8” high, 5-7 tons, Electric brakes.
Saw:
Superior Carbide Slasher - Cut wood instead of sharpen chains 36” to 60” diameter, 2 ga Carbide Slasher.
Engine:
50 to170 HP or PTO Drive with user’s tractor.
Hydraulics:
Commercial Shearing
Splitter:
35 - 72 tons, 3-5 second cycle time; 2, 4, 6, 8, 10, 12, 14 & 21 way pkg wedge. Capacity - 4” to 27” Log diameter 0” to 48” Block Length Lifetime warranty on the entire splitter chamber.
Infeed Conveyor:
16” - 30” long Hydraulic powered.
Clean out Hopper: Get rid of bark and wood slivers before being conveyed away.
New Grapple System Now Available!
2040 Rogers Road, Perth, O n ta r i o K 7 H 1 P 9 Canada
www.cord-master.com Email: cordking@cord-master.com
Today!
888-219-9663 8 n
The Original Lumberman’s Exchange
Visit us online at www.LBXonline.com!
Forestry Auction, Montgomery AL June 4-5th Check out our website for photos & detailed listings soon!
2008 CordKing Model 44 Item ID: 13167 Contact: Chris 800.315.9950 Ext. 600 www.LBXonline.com
‘81 CAT D7G w/ Rippers Item ID: 13222 Contact: Tom Ph: 800-315-9950 x604
www.LBXonline.com Custom Firewood Processor - Easily cuts 3+ chord an hour. Fold in deck, conveyer on wheels, 24” capacity!! Very clean running machine. - Item ID-13108 - Sam 800.315.9950 x603 ‘06 Cord King Model 60 - Wood Processor for SALE. 60” circular saw, 26” log capacity, 30’ Discharge Conveyor, Clean out tumbler, 15 YD saw dust discharge dumpster, 3 Different Size Wedges, extra teeth, 4 Cylinder CAT Motor, Heated cab. Runs daily. - Item ID-13256 - Chris 800.315.9950 x600 ‘08 Cord King - Model #44 refurbished and completely gone thru by Cord King in ‘08 Machine it has a 24’ outfeed conveyor. Machine is in Excellent condition!
800-447-7085
- Item ID-13167 - Chris 800.315.9950 x600
HOGS/WOODGRINDERS
West Salem Grinder and Gen Set - Model WSM 2822, With a Cutler Hammer Soft start. There is also a full set of extra hammers that go with it plus one original from factory to use as a pattern when rebuilding the others with hard
AL Lic. 1137 (Bryant Wood, Auctioneer) AL Lic. 1791 (J.D. Gray, Auctioneer)
3475 Ashley Road, Montgomery, Alabama 36108
(334) 264-3265 • (334) 262-0370 Fax: (334) 269-6990
www.jmwood.com
For Classifieds Call Your LBX REP at 1-800-315-9950
May 2014 n 9
There's Only One Way to Make Money in the Firewood Business…Production!
There’s Only One Way to Make Money in the Our Vision for Your Success is 20/20 Firewood Business…. Production! The Results are in YOur from the Great Firewood Shootout… Our VisiOn FOr success is 20/20
Our Rapido Loco and shootout... Woodbine Pro 20 The results Are in From the Great 20 Firewood Our rapidoDominated Loco 20 and Woodbine Pro 20Competition! DOMinATeD The cOMPeTiTiOn! the de A Ma e US th in
Woodbine Rapido Loco 20 Features Woodbine Rapido Loco 20 - 50” Simonds Circular Slasher Blade Features: - 73 HP Deutz Diesel • 50" Simonds Slasher - Tandem Axle DOTCircular Approved TrailerBlade • 73 HP Deutz Diesel - 24’ Conveyor STANDARD • Tandem Axle DOT Approved Trailer - 13’ Powered Infeed STANDARD • 24' Conveyor Standard - 8• Way Splitting Wedge 13' Powered Infeed Standard - 20” Log Diameter • 8-way SplittingCapacity Wedge - Push-Button Splitting System • 20" Log Diameter Capacity • Push-button Splitting System
At $54,900 Ready To Produce, At this is$54,900 the Fastest Ready to Produce, this is Production Firewood The FastestinProduction Processor North Firewood Processor in America.* North America.*
Woodbine Pro 20 Woodbine Pro 20 Features
- Oregon .404 Harvester components Features: - Tandem Axle DOT Approved Trailer • Oregon .404 Harvester Components - UpgRADeD 60 HP Deutz Diesel for more power! • Tandem Axle DOT Approved Trailer - 24’ Conveyor STANDARD • Upgraded 60 HP Deutz Diesel for More Power! At $44,900 the - 13’ Powered Infeed STANDARD • 24' Conveyor Standard Woodbind Pro 20 leads 13' Powered Infeed Standard - 8• Way Splitting Wedge At $44,900 its class in PRICE, • 8-Way SplittingCapacity Wedge - 20” Log Diameter the Woodbine Pro 20 PRODUCTIVITY and • 20" Log Diameter Capacity leads its class in Price, - Push-Button Splitting System PROFITABILITY* • Push-button System Productivity and - Our Most PopularSplitting Chain Saw Machine • Our Most Popular Chain Saw Machine Profitability*
remember HindsigHt is 20/20
Remember: Hindsight is 20/20
sO BeFOre YOu BuY cOMPAre eiTher OF The Soseries Before You Buy, compare either of the 20 PrOcessOrs FrOM crD MeTALWOrks TO AnYProcessors BrAnD - AnY siZe - AnYWhere. 20 Series from CRD Metalworks to Any Brand, Any Size, Anywhere check them out at the
Family Owned – Family Operated – Factory Direct
Family Owned—Family Operated—Factory Direct
*As Seen In Sawmill & Woodlot Magazine 10 n
The Original Lumberman’s Exchange
Call 888-667-8580
Sawmill & Woodlot www.crdmetalworks.com *As seen in
magazine.
Visit us online at www.LBXonline.com!
SINGLE LOT AUCTION NO MINIMUMS - NO RESERVES
One of
Westerlund LOG HANDLERS, LLC
12 Noon - Monday - May 12 Call for Auction Location
‘98 Peterbilt 357 • C12 engine, 18-speed transmission, Full lockers, 7000 Cerco Loader .......... . ........... Asking $55,000
Contact Steve (563) 580-0383
Ownership Rights & All Equipment of Westerlund Log Handlers
WI
New Price!
‘98 Peterbilt 378 • N-14, cummins, 18-spd, engine brake, air ride suspension, aluminum wheels, tandem axle, full locker, full gauge panel, loaded 7000 Serco log loader.... Asking $55,000
Contact Steve (563) 580-0383
WI
surfacing. The gen set is a 360 KW with a Big Cam 855 Cummins engine. Extremely low 670 Hours. Owner is negotiable. - Item ID-12386 - Sam 800.315.9950 x603
Logging Equipment
1989 Ford L-9000 w 2005 Prentice 120E - Very clean Truck with newer 2005 Prentice 120E loader with 25’
ALL EQUIPMENT OF WESTERLUND MAY INCLUDE: NICHOLSON A-1-77 44” ring debarker, s/n: 215-37006; 40’ infeed conveyor w/(10) hourglass rolls, incline bark conveyor, outfeed conveyor, 5 ramp log discharge, MARATHON 585-KW generator w/DETROIT diesel engine 1989 KOMATSU WA600-IL wheel loader w/hydraulic log forks, s/n: A10164 1992 KOMATSU WA600-IL, wheel loader w/hydraulic log forks, s/n: A10337 1996 KOMATSU WA600-ILC, wheel loader w/hydraulic log forks, s/n: A50002 1991 KOMATSU WA600-IL, wheel loader w/hydraulic log forks, s/n: A10314 1991 KOMATSU WA600-IL, wheel loader w/hydraulic log forks, s/n: A10286 1996 KOMATSU WA600-ILC, wheel loader w/hydraulic log forks, s/n: A50052 1996 KOMATSU WA600-ILC wheel loader no forks, s/n: A50088 1997 KOMATSU WA600-ILE, wheel loader w/hydraulic log forks, s/n: A51052 1990 KOMATSU WA600-I, wheel loader w/hydraulic log forks, s/n: 10271 2003 KOMATSU WA600-3L wheel loader w/YOUNG log forks, s/n: A52087 1989 KOMATSU WA600-1 wheel loader w/YOUNG log forks, s/n: 11235 1980 CAT 988B wheel loader w/YOUNG log forks, s/n: 50W4463
2003 CAT 325L track mounted log loader, s/n: CAT0325CCS3M00319 2004 CAT 330C- FM track mounted log loader, s/n: 339CPB1K00200 1997 CAT 330BL track mounted log loader, s/n: 6DR01028 2001 CAT 330B track mounted log loader, s/n: CAT0330BT6DR04780 2004 CAT 322C track mounted log loader, s/n: CAT0322CKC3R00297 2001 CAT 320C track mounted log loader, s/n: CAT0320CVBGB00341 2007 CAT 320C track mounted log loader, s/n: CAT0320CLSAH01223 2001 KOMATSU PC300HD track mounted log loader, LINKBELT 2800 track mounted log loader w/PIERCE boom 1994 KOMATSU PC400LC excavator, s/n: A70566 TRAILER LOADER w/ROBBINS & MYERS hoist 2003 MQ 45 generator, trailer mounted, diesel ALLMAND Night-Lite Pro light tower 2004 CAT 320C-FM track mounted log loader, s/n: SAH00243 KENWORTH T/A off-road dump
Additional Photos, Decriptions, & Information Available on Our Website: murphyauction.com
James G. Murphy Co.
Commercial & Industrial Auctioneers
1.800.426.3008 - 425.486.1246
murphyauction.com
extend-a-boom. Has new battery; 350 HP Cummins engine with
at 70%. Rears at 30%. Detroit 3-53
1977 (est) FMC 220CA Tracked
Open ROPS cab. Stick Steering.
only 250,000 miles; 3 stage Jake;
runs well. Center pin tight. Slight
Skidder w/Swing Boom Grapple
Detroit 4-53 engine. Runs good. -
New Tires!; New seals; Just had
play in steering pin. Straight metal.
- 1977 (est) FMC 220CA Tracked
Item ID-12325 - Tom 800.315.9950
brakes done. - Item ID-12736 - Tom
Weighs about 18,000 lbs. Can haul
Skidder w/ESCO Swing Boom
x604
800.315.9950 x604
on 10 ton trailer. - Item ID-12249 -
Grapple. Good running condition.
1978 (est.) FMC Model 220 Track
1969 Timberjack 225D skidder - ring
Tom 800.315.9950 x604
Front blade. Detroit 6V53 engine.
Skidder - Engine and transmission
chains front ice chains rear, very
1977 (est) FMC 220CA Tracked
No winch....they cannot fit with
have very few hours since they
good condition!! - Item ID-13215 -
Skidder - Good running unit.
swing boom grapple. Military style
were reconditioned. Owner reports
Sam 800.315.9950 x603
Detroit 6V53 cranks and runs well.
tracks at 70%. - Item ID-13227 - Tom
that about half the tracks need
1976 Clark 664 Cable Skidder -
Military style tracks at 70%. Fixed
800.315.9950 x604
to be re-pinned and bushed, and
Approximately 7500 hours. S/N
ESCO Grapple and working Winch.
1978 Clark 666 Grapple Skidder
sprockets and torsion bar need to
514F-2341-CAC. Strong Clark Winch;
Front Blade. - Item ID-13226 - Tom
- Strong skidder. Esco 26 grapple
be replaced. - Item ID-13126 - Tom
Tire chains; Pulls good. Front tires
800.315.9950 x604
with winch. 28L x 26 tires at 60%.
800.315.9950 x604
For Classifieds Call Your LBX REP at 1-800-315-9950
May 2014 n 11
The Rascal H.A.W.G. Ideal to Grind: Construction Waste • Stumps • Land Clearing Green Waste • Asphalt Shingles • Palm • Pallets Difficult & Dirty Materials Simplicity Mastered Ease of Operation with Less Downtime Change Particle Size While You Grind
Universal Refiner Corporation P. O. Box 151 • Montesano, WA 98563
800-277-8068 12 n
The Original Lumberman’s Exchange
Visit us online at www.LBXonline.com!
‘90 Clark 667 Grapple Skidder Item ID: 13224 Contact: Tom Ph: 800-315-9950 x604
www.LBXonline.com
‘98 Hydro Ax 611EX FB Item ID: 13245 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com 1979 Timberjack 230 Forwarder Good running forwarder with 80% rubber. Open cab. Detroit engine.
“Built-Rite” 18scp
Simple but hard working machine. Very clean for its’ age. Hard to find.
Compact Firewood Processor
- Item ID-13057 - Tom 800.315.9950 x604 1981 Cat D7G w/Rippers - Only 6500 hours on this limited used machine. Owner reports that it has new alternator and has been gone through completely. No leaks. Can pull the twin rippers through ANYTHING! Real powerful machine without all the electronic gizmos of new units. - Item ID-13222 - Tom 800.315.9950 x604 1981 Hydro Ax 411B w/Koehring 16” Hot Saw - Strong Cummins 6BT 150HP engine with no blow by. 23.1
‘99 Daewoo 220 Solar II
11000 hours, has heat and air! Daewoo inline 6 Engine 145hp. Computer works for the stroker. Tracks are around 11’. Stroke delimber is a Pro mark 50. Designed under the timberline, and has a timberline head. Has all maintenance records and extra parts! Great running machine! Location: Montana
Item ID: 12936 Contact: Chris Woods 800.315.9950 Ext. 600
www.LBXonline.com
x 26 tires at 75%. Koehring Hot Saw has fresh teeth and runs well. Very
1984 Caterpillar 518 Skidder - long
nice machine for the price. - Item
frame line skidder, Has Goodyear
ID-12538 - Tom 800.315.9950 x604
23.1 X 26 tires that all match, about
1981 JD 850 Grapple Dozer - 10,400
50 percent tread. This is a very
hours. Tracks @ 50 percent; 72”
good skidder! - Item ID-13180 - Sam
Esco grapple; Runs well; Some slack
800.315.9950 x603
in blade; Everything works. - Item
1989 JD 540-D Cable Skidder -
ID-13149 - Tom 800.315.9950 x604
Original owner; Hour meter shows
No other compact processor matches it! Compare apples to apples with any small processor built and you will see why the 18SCP is #1 for the money! • Available with the multi-wedge system for even size firewood • Capable of handling 22' logs (with opt. 4' feed trough ext.) • Capable of cutting logs up to 20" dia. (with opt. 25" bar) • Fast 6-second cycle time • Integrated BR12 Conveyor available
“Built-Rite” Mfg. Corp. 750 East Hill Rd • Ludlow, VT 05149
See Us at the Richmond EXPO #A14 1.800.757.2520
For Classifieds Call Your LBX REP at 1-800-315-9950
www.built-rite.com May 2014 n 13
PIPER’S Saw Shop 210 Prentice Loader
5 7 0 6 • 5 4 8 • 800
Item ID: 13249 Contact: Chris 800.315.9950 Ext. 600 www.LBXonline.com
Promotional Pricing Offer
Simonds Red Streak Hard Back 1-1/4” x .042 x 3/4” or 7/8” Length 13’2”
$14.71 $14.27 each Tell us you saw it here!
L im it e d T im e O n ly
‘97 Timbco TF815 Forwarder Item ID: 13232 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com
‘06 JD 843J Feller Buncher
Item ID: 13258 Contact: Tom Ph: 800-315-9950 x604
www.LBXonline.com 5800 hours. Serial number: 554925.
seat recovered and front U-Joint.
for a year moving 2-3 loads per day.
can pull a trailer and work in sloppy
23.1X26: Tires; 20% Remaining
Priced to sell! - Item ID-12676 - Tom
- Item ID-13143 - Tom 800.315.9950
conditions. Great value for a loader
tread. New(not rebuilt) John Deere
800.315.9950 x604
x604
on a carrier like this! - Item ID-12931
engine w/900 hours. No smoke or
1989 JOHN DEERE 648D - 30.5 tires
1990 Clark 667 Grapple Skidder -
- Tom 800.315.9950 x604
noise. Runs strong. On one of the
around 40%. We have another
500 GALLON WATER TANK - SERIAL
1991 John Deere 640D Skidder - 23.1
coldest days of the year, the tractor
648 D for parts that will go with
# 560HC01017, 500 HOURS ON
x 26 Tires 50%, $27,500, Rebuilt
started with only 1 turn of the
it. Machine runs, but needs a
REBUILT CUMMINS ENGINE. Approx
Trans.,Good Tight Machine - Item
switch Sheet metal is very good.
little TLC. - Item ID-13220 - Sam
11,000 on machine. Light package.
ID-13191 - Sam 800.315.9950 x603
Pins and bushings average to good
800.315.9950 x603
30.5 tires at 30% with chains. Runs
1993 Timberjack 380B Tree
condition. Good dozer blade with
1989 Timberjack 380 Grapple
well. Huge water tank could help in
Trimmer - s/n CM4478, 5,152 hours,
good pins and bushings. - Item ID-
Skidder - 1989 Timberjack 380
fire fighting applications. - Item ID-
Delivered New in 1995, Cab with
13146 - Tom 800.315.9950 x604
Grapple Skidder. Serial # 385267.
13224 - Tom 800.315.9950 x604
A/C, 5 blades, 75 reach, Branton
1989 JD 640D Grapple Skidder
Almost new grapple. Engine has
1991 Barko 160 Articulated Carrier
Winch, Push Blade, 4X4, Firestone
- turbo with EZ Grapple. S/n
been replaced. Transmission just
- Good running machine with about
67X34.00/26 tires @ 90%, Counter
W640DC507211 28L-26 tires
rebuilt. 28L tires. Center pins and
9,000 hours. Mounted on Rough
Weight, 6 cylinder Cummins Diesel
3@35% 1@85%. Runs good. Needs
bushings show medium wear. Good
Terrain 4 wheel drive carrier that
Engine. FOB:Okeechobee, FL - Item
14 n
The Original Lumberman’s Exchange
Visit us online at www.LBXonline.com!
ANY WAY YOU CUT IT,
IT’S GOT TO BE
WOOD-MIZER DISCOVER HOW OWNING A WOOD-MIZER PORTABLE SAWMILL IS BOTH A PASSION AND A PROFESSION.
SAVE UP TO
$3,700* Now thru July 31, 2014
Countless Wood-Mizer owners achieve success by turning their passion for wood into a profession that generates not only an income but also personal satisfaction. With Wood-Mizer you can love what you do and do what you love. Choose any of Wood-Mizer’s 12 sawmill models and you get a quality mill that is engineered for performance plus unmatched customer service. Take the next step in your decision to make your passion a profession. Call today for a FREE catalog and DVD and a guide on how to make money with a Wood-Mizer.
David Yasenchack, David Yasenchack Timber Framing & Design
© Copyright 2013 Wood-Mizer LLC
With his LT40 Hydraulic, David designs and builds unique timber frame homes, studios, and garden structures using trees from his forest.
800.553.0182 | sawboards.com
© 2014, Wood-Mizer LLC *Prices subject to change without notice.
For Classifieds Call Your LBX REP at 1-800-315-9950
ORA 45988 LumbermansExchange May2014 AnyWayPromo.indd 1
May 2014 n 15 4/15/14 2:59 PM
‘10 Wood-Mizer LT-70 Item ID: 13250 Contact: Chris Woods 800.315.9950 Ext. 600
www.LBXonline.com
‘77 FMC 220CA Skidder w/ Swing Grapple
Item ID: 13227 Contact: Tom Ph: 800-315-9950 x604
www.LBXonline.com
‘12 Lamtrac 8400T Mulcher Item ID: 13272 Contact: Tom 800.315.9950 Ext. 604
Sawmill Exchange North America's Largest Source of Used Portable Sawmills. Over 800 Ads:
Portable Sawmills, Commercial Sawmills, Pallet and Cutstock Manufacturing, Firewood Manufacturing, Chipping and Grinding, Trimmers, Debarkers, Dry Kilns, Edgers, Resaws, Ripsaws and Gang Saws, Loaders, Moulders and Planers, Sawdust Blowers and Chains, Conveyors/Transfers/Decks/Green Chain, Rolling Stock, and Much More!!
The Place to Sell Your Equipment Call Us for a Free List of Over 800 Ads or to Sell Your Equipment.
800-459-2148 (
)
US & Canada
www.sawmillexchange.com P.O. Box 710930 • Houston, TX 77271 16 n
The Original Lumberman’s Exchange
www.LBXonline.com
‘97 Kobelco SK 200 Log Loader
1994 Barko 160B - electric
Item ID: 13229 Contact: Tom Ph: 800-315-9950 x604
knuckleboom, 30' boom, 75hp
www.LBXonline.com
ID-13090 - Tom 800.315.9950 x604
motor, Rotobec continuous grapple, 5,000 original hours. ( excellent
1994 JD 640E Cable Skidder - Just
condition.) - Item ID-13238 - Chris
over 10,000 hours; 23.1 x 26 Tires at
800.315.9950 x600
70%; Chains NOT included: Many
1994 Barko 275B Stationary Loader
updates-New Hydraulic Pump (6
- Includes Mounting platform and
months old), Rear end redone
75HP electric motor. Very few
(3mo. ago); Hydraulic Control
hours as this machine was taken
Block-New Seals (3 Months ago);
down shortly after purchase and
Rebuilt Water pump (3 months
was never used again. Has been
ago). Unit running today. - Item ID-
sitting in excess material yard.
12500 - Tom 800.315.9950 x604
Has 30’ reach. Continuous rotation
1994 JD 640E Cable Skidder - Very
grapple. Cab with AC. Original price
clean and good running 1994 JD
was $140,000 - Item ID-12969 - Tom
640E. S/N 546241. New 28L x 26
800.315.9950 x604
tires. Steering cylinders rebuilt; New
1994 Barko 275B Trailer Mount
steering bushings; New seat; New
Loader - Joystick controls. CTR
JD radiator; New Hyd Pump; New
Delimber. Recently overhauled
alternator; New injection pump;
Cummins 6BT5.9 engine. Has
Blade valve rebuilt; New hoses;
been sitting for about 6 months.
New 125’ cable. Hour meter broken
Great Value for a loader/delimber
but estimated hours are 10,500.
combination. The Barko 275B is a
Machine is too large for owner. -
30,000 lb. lift capacity unit. - Item ID-
Item ID-13102 - Tom 800.315.9950
13085 - Tom 800.315.9950 x604
x604
Visit us online at www.LBXonline.com!
‘03 JD 650 G Dozer w/Winch
Item ID: 13270 Contact: Tom Ph: 800-315-9950 x604
www.LBXonline.com
Enclosed Cab
The Blackstone Beaver Components
• Operator comfort in the enclosed cab • Dual joystick controls ease hand fatigue
• Dual joystick controls ease hand fatigue
Out-feed Conveyor PLC controls
• • • •
and electronic valves reduce operator error and optimize speed. PLC controls and electronic valves reduce
Control conveyor hydraulically from cab Conveyor hydraulically folds for transport Cleated belt holds wood securely 4" cleanout area allows small debris to fall
Size
1994 JD 648E Grapple Skidder Good running 1994 JD 648E. Single Arch Grapple. Winch. 28L x 26 7470 hours. - Item ID-13103 - Tom
Maximum log length is 25' with a 24" diamat-
the manufacturer. Integrate your ideas into a production machine built to match your requirements! Don’t need a mobile unit, specify a skid-mount.
Blackstone Beavers are customizable by Speed the manufacturer. Integrate your ideas into with a 3-stage The processor comes standard hydraulic pump. All strokes are performed in a production machine built match your highto speed by default, but if greater splitting • Largest hydraulic folding deck in the business is needed, pressure • Deck folds requirements! into the machine for transport Don’t needforce a mobile unit,will immediately be increased. When load is decreased, the high speed stroke will renew. specify a skid-mount. 3-Strand Live Deck
The Blackstone Beaver Components TheLive Blackstone 3-Strand Deck Beaver Firewood
Processor isfolding built indeck thein USA • Largest hydraulic the with business components. • Deckindustry folds intostandard the machine for transport
Hydraulic systems built with high quality Parker hoses and hose ends.
lackstone
Speed
eaver
• Operator comfort in enclosed cab Customization The processor comes standard with a 3-stage • Dual joystick controls ease hand Blackstone Beavers are customizable by hydraulic pump. All strokes are performed in fatigue the manufacturer. Integrate your ideas high speed by default, but greater P: if (508) 478-5902 splitting 123 Uxbridge Road • Comfortable, adjustable seatMendon, MA 01756into a production machine built to match F: (508) 321-9876 force is needed, pressure will immediately be your requirements! Don’t need a mobile • Joystick controls increased. When load is decreased, • Engine controls inside cabthe high unit, specify a skid mount. speed stroke will renew.
Size Maximum log length is 25’ with a 24’ diameter. Cut length is adjustable up to 24” long. Splitting head can be adjusted by up to 10” for consistent splits on various log diameters.
lackstone
eaver
P: (508) 478-5902 F: (508) 321-9876
1994 Prentice 180D Log Loader condition, it has been sand blasted
Firewood Processors
Size
Customization
800.315.9950 x604 11,793 hours, Machine is in good
Firewood Processors
operator error and optimize speed.
I
tires at 65%. Cummins engine.
eaver
I
www.LBXonline.com
eaver
lackstone
er. Cut length adjustable up to 24" long. Maximum log length is 25' with a is24" diamatSplitting head can be adjusted by up to 10" er. Cut length is adjustable to 24" for up consistent splitslong. on various log diameters. Splitting head can be adjusted by up to 10" Customization Blackstone Beavers are customizable by for consistent splits on various log diameters.
Woodland K4 Industrial Sawmill Item ID: 13263 Contact: Chris 800.315.9950 Ext. 600
built in the USA with industry standard components. Hydraulic systems built with high quality Parker hoses and hose ends.
I
Control conveyor hydraulically from cab Conveyor hydraulically folds for transport Cleated belt holds wood securely 4" cleanout area allows small debris to fall
lackstone
I
Out-feed Conveyor • • • •
The Blackstone Beaver Firewood Processor is built in the USA with industry standard components. Hydraulic systems built with high Enclosed Cab The Blackstone Beaver Components quality hoses and hose ends.Beaver Firewood Processor is • Operator comfort in theParker enclosed cab The Blackstone
123 Uxbridge Road Mendon, MA 01756
Speed The processor comes standard with a 3-stage hydraulic pump. All strokes are performed in high speed by default, but if greater splitting force is needed, pressure will immediately be increased. When load is decreased, the high speed stroke will renew.
Featuring: Exclusive Split Belt, Stand Alone Conveyor Featuring our exclusive split belt design stand alone conveyer. We customize any length and option available! Call today for more information!
and painted, low pro tires 17.5 Item ID-12759 - Sam 800.315.9950 x603 1994 Prentice 410D Log Loader Knuckleboom - mounted on trailer w/ CTR Delimber, H/A, JD Powered
(508) 478-5902
- Item ID-13184 - Sam 800.315.9950 x603
www.blackstonebeaver.com
1995 Barko 775 B Feller Buncher - Pumps recently redone. 400 hrs on injection pump. always started
10” wide. Decent condition.
brakes work. Priced to sell. - Item
pump. Runs well. Cab has heat
good. in good working order. 22in
Priced to sell - Item ID-12946 - Tom
ID-12892 - Tom 800.315.9950 x604
and air with stereo and all run
kohing head. head works great. -
800.315.9950 x604
1995 JD 290D with Hytec 4700
well. Head recently updated and
Item ID-13185 - Sam 800.315.9950
1995 Great Dane Flat Bed Trailer
Harvester Head - 290D in good
does great job in hardwood.
x603
- 1995 Great Dane 96x48ft. Will
condition. Engine just overhauled.
Priced to sell! - Item ID-12206 - Tom
1995 Entyre Low Boy Trailer - 9’
need floor. Tires are fair. Lights and
Undercarriage at 50%. New water
800.315.9950 x604
For Classifieds Call Your LBX REP at 1-800-315-9950
May 2014 n 17
P.O. Box 170 • Prentice WI 54556-0170 • 800-243-5438
www.multitekinc.com • sales@multitekinc.com
Multitek Firewood Processors Increase Your Productivity and Profitability • Quality Equipment to Reduce your Labor Costs • Circular Saw or Bar & Chain Models • 7 Models to Choose From • Production Ratings up to 5.5 Full Cords Per Hour
Made in the U.S.A.
‘94 Prentice 180D Log Loader
Prentice 210D Knuckleboom
Item ID: 12759 Contact: Sam 800.315.9950 x603
Item ID: 12914 Contact: Sam Ph: 800-315-9950 x603
www.LBXonline.com
www.LBXonline.com
‘08 JD 2554 Loader w/ Waratah
Item ID: 13235 Contact: Tom Ph: 800-315-9950 x604
www.LBXonline.com
Custom Firewood Proc. Item ID: 13108 Contact: Sam 800.315.9950 x603
www.LBXonline.com Estimated 9500. - Item ID-12734 Tom 800.315.9950 x604
1995 JOHN DEERE 693D CRAWLER
hours on new JD 4 cylinder engine.
for cutting larger trees. Very well
1996 Prentice 210D Knuckleboom
BUNCHER - Multi Purpose feller
Recently replaced turbo. 23.1 tires
maintained machine. - Item ID-12072
- 10,332 hours. Please call Daren at
buncher, 1995 John Deere 693D
at 50%. 16” Rapid Buncher shear
- Tom 800.315.9950 x604
Ext. 603 for more details. - Item ID-
Crawler Multi purpose feller
head. Machine is fast and in very
1996 Cat D5H XL Dozer - 50%
12914 - Sam 800.315.9950 x603
buncher c/w circular saw head and
good condition. - Item ID-12531 -
Undercarriage. 6 way blade. Open
1996 Timbco 425B w/Fabtek Head
shear head, first time offered on the
Tom 800.315.9950 x604
ROPS. 5407 Hours. Runs good. -
- Good running machine with 9650
market, only 6000 hrs. two heads,
1996 511EX Hydro-Ax With
Item ID-13021 - Tom 800.315.9950
hours. Cummins 6BT5.9 engine.
MUST SELL. Ideal for clearing
Bunching Saw Head - Hours est at
x604
24” pads. U/C at 50% or better. AC/
development land. READY FOR
6800. Only 200 hours on factory
1996 Franklin 560 Cable Skidder -
Heat/Stereo all work. Fabtek Model
LOGGING. - Item ID-13206 - Sam
reconditioned hydraulic motors
S/N 16432; Cummins Recon engine
2000RP 4-Roller processor head. -
800.315.9950 x603
and pumps. Comfort cab with
with 177 HP; 28L Tires at 60%; Heat
Item ID-12830 - Tom 800.315.9950
1995 Morbark Wolverine 3-Wheeled
working air. 28L tires with chains
and AC; Running today in very
x604
Feller Buncher - S/N 4073. Only 1000
at 50%. Saw head has side pocket
good condition. Hour meter broken.
1996 Timberjack 230 Forwarder
18 n
The Original Lumberman’s Exchange
Visit us online at www.LBXonline.com!
For Classifieds Call Your LBX REP at 1-800-315-9950
May 2014 n 19
ROW ELECTRICAL EQUIPMENT, INC. YOUR SOURCE FOR USED, RECONDITIONED:
• Squirrel Cage Motors • Gear Motors • Wound-Rotor Motors • Synchronous Motors • DC Motors
• DC Motors - Crane and Mill • Adjustable Speed Drives • Generators - AC and DC • Engine-Generator Sets • Transformers, Single Phase
P.O. Box 2812 • Toledo, Ohio 43606
Fax to:
• Transformers, Three-Phase • Across/Line Magnetic Starters • Reduced Voltage Starters • Safety Switches • Phase Convertors
800-248-4479
www.rowelectrical.com 419-248-4479 rowelec@glasscity.net WE ANSWER THE PHONE 24 HOURS • WE BUY USED Electrical
419-244-8887
THE BEST - FOR LESS! The Lumber Industry's Best Extruded Marker!
Come for Better Markers - Stay for Superior Quality, Price & Service
FREE
SAMPLES!
SHOP ONLINE
FLUORESCENT LUMBER
MARKERS
To Order visit the NEW WWW.AMARKERS.COM or Call 866-66AMARK
sales@amarkers.com • Fax:503-663-2850 PO Box 1524 Boring, OR 97009
Recycle our stubs .30¢ Other wax stubs .50¢
Family Owned and Operated for Over 20 Years!
Precision 58 Chip Pac Item ID: 12764 Contact: Sam 800.315.9950 x603
www.LBXonline.com
Forest-All Mill Item ID: 12762 Contact: Sam Ph: 800-315-9950 x603
www.LBXonline.com box 2009, new tram motor 2009.
- 15,000 hours. Good running
Cummins 4BTA3.9 engine. AC and
a yard. U/C at 60%. - Item ID-13229 -
The hydraulic system computer
condition. Working today. Serco
Heat work. Ready to work. - Item ID-
Tom 800.315.9950 x604
controller has been updated to
Loader. Dry and still runs strong.
13155 - Tom 800.315.9950 x604
1997 Linkbelt 3400 Stroke Delimber
TimberPro’s “TOC2” system. It is
- Item ID-12943 - Tom 800.315.9950
1997 Cat 527 Grapple Dozer -
- rebuilt Pierce Stroke Delimber. 36”
based on the newer IQAN control
x604
Tracked Grapple Skidder. Just
Pads on 60% undercarriage. 5221
system. - Item ID-13232 - Tom
1996 Timberjack 450C Grapple
under 16,000 hours. ESCO Fixed
hours. Good running condition.
800.315.9950 x604
Skidder - Approximately 9000
Boom Grapple & Winch Drum (no
Owner just spent $30,000 on
1997 Timbco TF815C Forwarder
hours. Working today. 28L x 26
cable attached), 6 Way Blade, ROPS
upgrading delimber. - Item ID-12992
- 5400 hours since new engine
tires at 40%. Chains for front tires.
with Wire Cage Cab. Very good
- Tom 800.315.9950 x604
installed and rebuilt pumps.
Single Arch Grapple. Winch. Heat
interior. Undercarriage at 70%,
1997 Prentice 210E TMS Package
Everything works strong. Heat,
and AC work well. Cummins Power.
Tracks at 90%, Well maintained and
- 9850 Hours on this very clean
air, OK. Needs oscillating center
transmission has been gone thru,
ready to work. - Item ID-12901 - Tom
machine. Working today. Has total
bearing. Tires 2 new 750/55/26.5
it has new glass in all windows but
800.315.9950 x604
merchandising system with CTR
all others are 60% some gouges.
the front one. Heat and air fixed and
1997 Kobelco SK 200 Log Loader -
414 Delimber and CTR 42 Slasher.
Turntable is tight. Newer Rotobec
new exaust pump, and the grapple
high and wide tracks, Jewell boom
Well maintained. Has AC but is
grapple. Pins and bushings are all
cylinders repacked. - Item ID-12769 -
and grapple with 11,940 hours.
not working. - Item ID-12563 - Tom
good. Overall very reliable machine.
Tom 800.315.9950 x604
Forestry guard package. Cab riser
800.315.9950 x604
- Item ID-13274 - Tom 800.315.9950
1996 Valmet 603 3-Wheeled Buncher
for great visibility that tilts for
1997 Timbco TF815 Forwarder
x604
- 1996 Valmet 603 Three Wheeled
transport. It has a 19’ boom and
- 1997 Timbco TF815 forwarder.
1997 Timberjack 460 Grapple
Feller Buncher. Good running
a 12’ stick and 4’ live heel for 33’
S/N F42,, approx. 16000 hours,
Skidder - 12,300 hours. Very well
condition. Hours estimated at 8500.
reach. The grapple is 51” max open.
Cummins 5.9L 200 hp engine 4
maintained. 28L x 26 tires at 90%.
Meter does not work. 28L x 26
Serial #YOU3172. Cummins 6B5.9.
tracks on 710/55x26.5 tires, Reman
Big winch. 100” Esco Grapple.
tires at 50%. Koehring 18” Hot Saw.
36” triple grousers for working on
Rexroth tram pump 1/11, New drop
Cummins engine. Working today.
20 n
The Original Lumberman’s Exchange
Visit us online at www.LBXonline.com!
Introducing
THE BARTLETT B-ITCO BARTLETT INSERTED TOOTH CUT OFF
Specifically Designed To Save You TIME & MONEY! ‘08 John Deere 334J Only 900 hrs!
3 Fits Most Popular Brands 3 Quickly Replaceable on Site 3 No More Shipping it to the saw shop 3 Can Be Sharpened on the Saw
Item ID: 13034 Contact: Sam 800.315.9950 x603 www.LBXonline.com
If You’re Operation Utilizes Slasher/Cut-Off Saws in the Woods or at the Mill, Call Bartlett Today!
‘01 Hydro Ax 721E Mulcher
LOGGING SLASHER SAWS LOG MERCHANDISING SYS. FIREWOOD PROCESSORS
Item ID: 13230 Contact: Tom Ph: 800-315-9950 x604
www.LBXonline.com
Bartlett's saw service and supply 800-566-0319
au t Bartlett’s Also Offers The Jones Saw Grinder for On-Site Sharpening! Bartlett’s Saw – For All your Carbide & Wide Band Saw Supplies, Service & Sales
Morbark 1200 Tub Grinder Item ID: 12919 Contact: Sam Ph: 800-315-9950 x603
www.LBXonline.com
EuroBit – The Finest Carbide Saw Bit Available
621 US 41A Henderson, KY 42420 e-mail: bartlett@henderson.net Wide Band Saws In All Widths, Kerf, Length – Single & Double Cut
Decent condition. 923,000 miles.
Tom 800.315.9950 x604
ID-12616 - Tom 800.315.9950 x604
Well maintained. Good back up rig!
1998 Model DM Mack Log Truck -
1998 Timbco 425 w/Quadco
- Item ID-13022 - Tom 800.315.9950
300 HP Mack Engine; 330,000 miles;
2800 Saw - Clean unit and well
x604
7 Speed Transmission, 46K Rear,
maintained. 2800 has 360 degree
- Item ID-12564 - Tom 800.315.9950
1998 Hydro Ax 611EX Feller
20K Front, Tri -Axle, 22.5 Tires, Like
rotation for max production. 24”
x604
Buncher - about 8800 hours.
New Log Bed, Truck is in very good
single grousers. Undercarriage
1998 Franklin 170 Cable Skidder -
Bunching Saw Head has large
condition! Plumbed to take pup
at 50%. Pumps are dry. Machine
28Lx26 tires 50% rear and 30% front;
pocket for accumulation and lifting
trailer. Very well maintained. - Item
working today. - Item ID-12719 - Tom
Recon Cummins 6BTA5.9 engine
side shield for notching larger trees
ID-12493 - Tom 800.315.9950 x604
800.315.9950 x604
added about a year and a half ago;
before felling. Cummins engine.
1998 Pitts 42’ Log Trailer - Nice
1998 Valmet 603 3-Wheeled Buncher
Hour meter is broken; H38 Franklin
28L tires at 60%. Decent running
condition. 42’ long. 102” wide.
- 6500 hours on total machine
winch; Very clean and works almost
condition. - Item ID-13245 - Tom
95,000 lb GVW. - Item ID-12565 - Tom
but no hours on 4BT3.9 Reman
everyday. Chains NOT included. -
800.315.9950 x604
800.315.9950 x604
Cummins Engine. Equipped with
Item ID-12735 - Tom 800.315.9950
1998 John Deere 650G Dozer - New
1998 Tigercat 230 Loader - 9400
18” Waratah High Speed Disc Saw.
x604
tracks 95%, very good shape, 7,000
hours. Tight and dry. No leaks. AC
28L x 26 Tires at 40% complete with
1998 Freightliner Haul Truck -
hours. 6-Way Blade. - Item ID-12700 -
blows cold. Priced to move! - Item
chains. This machine has been
For Classifieds Call Your LBX REP at 1-800-315-9950
May 2014 n 21
Financing Available
Shrink Wrap Firewood/Wastewood
‘05 Kenworth T-800 w/Rotobec MT27 Loader
Sell Your WOOD – $300/cord or More! Double or triple your profits by shrink wrapping wastewood - forewood with WOOD-PAKer! Attractive various size packages can be obtained with our high production, easily operated and affordable machines. Eight machines available. The ideal equipment for producing square bundles-palletizable for ease in storage and transporting. Inquire for free details. Video and Package samples at nominal fee.
Item ID: 12612 Contact: Sam Ph: 800-315-9950 x603
www.LBXonline.com
B & B Manufacturing • 3007 West River Road • Olean, NY 14760
Toll Free 1-800-654-5320 E-mail: bbmfg@sprynet.com • Web: http://home.sprynet.com/~bbmfg/
Extec Shredder Item ID: 12926 Contact: Sam Ph: 800-315-9950 x603
www.LBXonline.com 1999 JD 643 DELTA Carrier w/Rake - This machine is a 99 model Delta. VERY POWERFUL and UNIQUE! It has a CAT 350hp engine, THREE pumps and valves that can work
‘77 FMC 220CA Track Skidder
Item ID: 13226 Contact: Tom Ph: 800-315-9950 x604
www.LBXonline.com
1999 CAT 525B Grapple Skidder Item ID: 12618 Contact: Sam 800.315.9950 x603
www.LBXonline.com
a mower, feller buncher saw head,
‘02 Timberjack 608S w/Hot Saw Item ID: 12194 Contact: Sam 800.315.9950 x603 www.LBXonline.com
or high speed mulcher. Only 5000 hours. 34” Tires at 60%. This machine was built on the 643G assembly line, so parts come from Deere except for the engine which CAT will support. This machine is designed for heavy duty work and includes an extra capacity fuel tank,
extremely well maintained and runs
28L x 26 Tires with chains at 90%.
very well. Hard to find them in this
Just installed new Reman Cummins
hours, it has heat and air! Its a
This is a WORK HORSE and a super
good of condition. Has a twin that
4BT3.9 Engine. - Item ID-12525 - Tom
Daewoo inline 6 Engine 145 hp.
value! Comes equipped with a 10
is available if you need two units.
800.315.9950 x604
The Computer works for the
foot rake. The cab is well appointed
- Item ID-12524 - Tom 800.315.9950
1999 Cat 525B Grapple Skidder -
stroker. Tracks are around 11’.
with cold air and heater. This
x604
heat and a/c, New Motor with 3000
Stroke delimber is a Pro mark 50.
machine was recently completely
1998 Valmet 603 3-Wheeled Buncher
hours, New Bushings, New Grapple
It’s designed under the timberline,
serviced and is ready to go to work.
- Good running machine with about
Cylinder, New Turbo, Tires are 28L
and has a timberline head on it. We
- Item ID-12624 - Tom 800.315.9950
6620 hours. Owner maintains his
x 26, fronts are at 40% and rears
have all the maitenance records
x604
equipment to the highest degree
are at 80%. - Item ID-12618 - Sam
and extra parts! Great running
1999 Tigercat 860D Delimber -
and it shows. Complete with
800.315.9950 x603
machine! - Item ID-12936 - Chris
w/ 3500 DEHNARCO STROKE
Waratah High Speed Disc Saw Head.
1999 Deawoo 220 solar ll - 11000
800.315.9950 x600
DELIMBER. Machine was purchased
22 n
The Original Lumberman’s Exchange
water tank, and hydraulic tank.
Visit us online at www.LBXonline.com!
U.S. Blades has been selected by Armstrong Manufacturing as a “Authorized Dealer” for distributor for sales and service of Genuine Armstrong equipment, parts, and service for the Eastern United States. The following state are covered by this agreement: Maine, New Hampshire, Vermont, Massachusetts, New York, ‘91 JD 640D Skidder Connecticut, Rhode Island, Pennsylvania, New Jersey, Maryland, Item ID: 13191 Virginia, Kentucky, North Carolina, South Carolina Contact: Sam Delaware, West U.S. Blades has been selected bysupplier Armstrong Manufacturing as a U.S. Blades is your single source of high quality knives, 800.315.9950 Ext. 603 Georgia, Alabama and Florida. distributor for sales and servicesupplies of Genuine saws and related maintenance for Armstrong Sawmills &equipment, Chip Mills. www.LBXonline.com
parts, and service for the Eastern Unitedthe States. The following With locations to serve mills throughout Southern wood beltstates to U.S. Blades also has field service technicians for installation and are covered by this agreement: the Northeast, U.S. Blades is here to support the Forest Products Maine, New Hampshire, Vermont, New York, Industry providing new products asMassachusetts, well as repair services. service of all Armstrong equipment with many years of Armstrong Connecticut, Rhode Island, Pennsylvania, New Jersey, Maryland, and equipment knowledge that will benefit our customers. Delaware, West Virginia, Kentucky, North Carolina, Carolina, U.S. Blades knives and saws are “Feared By TreesSouth Everywhere.” Georgia, Alabama and Florida.
p
Stocking Locations for “Genuine Armstr
‘11 JD 748GIII Grapple Skidder
U.S. Blades also has field service technicians forParts installation and and Equipment” service of all Armstrong equipment with manyFlorence, years of Armstrong parts SC 800-862-4544 and equipment knowledge that will benefit our customers.
Hampden, ME 800-432-7358
Stocking Locations for “Genuine Armstrong Parts and Equipment” Florence, SC 800-862-4544 Locations Authorized to Sell: Hampden, ME 800-432-7358 Florence, SC • Hampden, ME • Meridian, MS
Low Hours!! Item ID: 13176 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com
usblades.net•• 800-862-4544 800-862-4544 usblades.net
1984 CAT 518 Skidder
with a Valmet processing head.
reach), 28” double grouser pads.
included. Fantastic Yard Machine.
Comes with fire suppression
Cummins 8.3L 260 hp engine (New
FOB: Idaho. Financing available.
Item ID: 13180 Contact: Sam 800.315.9950 x603
system; 5.9 Cummins; Burns about
Reman 11/10 ). New rails and rollers
Possible RENT OPTION! - Item ID-
4.5-5 gallons an hour. The U/C
9/11. Reman Rexroth tram pumps
12520 - Tom 800.315.9950 x604
has less than a 1000 hours on it.
1/12. Non continuous rotation on
2000 Fabtek 153 Harvester - 13,000
Equipped with a Cranab 1400 squirt
upper. Keto 800 processor head;
hours. New Engine; New Pumps;
www.LBXonline.com
boom. Comes with Lox Max 4000
Approx. 2002 model. S/N C3T020
New Roller Chain; Runs Great!
new in 2001 and has appr. 13,500
harvesting head, with Logmate 402
( 2002?), new tracks, top knives
Working today. - Item ID-12944 - Tom
hrs. A new JD reman engine was
computer. Head has about 4500
11/11, 40” 11H bar, 33” cut, no top
800.315.9950 x604
installed less than 300 hrs. ago,
hours. Log Max- s/n 2186. Machine
saw, Hakmet computer, CanBus
2000 GMC 8500 Log Truck w/
machine also has CONTROL PLUS 2
hour meter not working. New oil
computer system with 4 wires. -
Loader - Six speed transmission
measuring system and top saw and
cooler 100 hours ago. Extra chains
Item ID-13150 - Tom 800.315.9950
with a 2 speed rear end. Powered
butt saw. Machine is currently on
and bars, plus some parts from
x604
by a strong CAT 3126 engine with
job working. - Item ID-13189 - Sam
uptime kit. - Item ID-13140 - Tom
2000 Cat M318 MH - Totally
250HP. Approx. 106,000 miles.
800.315.9950 x603
800.315.9950 x604
refurbished with 30 day warranty.
Truck is single axle with pusher in
1999 Timbco 425/Valmet 500
1999 Timbco 425D Harvester w/
Gone through from end to end
front. Pusher purchased new one
Harvester - Branded a Valmet 500T
Keto 800 - 800 Processing Head. S/N
by professional rebuild factory.
year ago. Loader is a 1995 Prentice
Harvester, this is in fact a Timbco
1598; Approx 14000 hours; Squirt
Hydraulic elevated cab for great
Model 120c w/22’ reach. Has one
425 Leveling Tracked Harvester
stick and long harvester boom (36’
visibility. 38’ reach. Logging grapple
or two hydraulic drips. Pole Trailer
For Classifieds Call Your LBX REP at 1-800-315-9950
May 2014 n 23
2004 Ponsse Buffalo King Forwarder Many updates!!
Item ID: 13151 Contact: Tom Ph: 800-315-9950 x604
www.LBXonline.com
‘05 TimberPro 830TF Forwarder Item ID: 13161 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com ID-13230 - Tom 800.315.9950 x604 2001 Precision 23/66 Whole Tree Chipper - One Owner: S/N 3310. Cat 3412E engine with 750HP s/n 4CR01701. New Injectors. Includes air compressor. Oil changed every 250 hours. 10,500 hours and runs like new. 3 axle trailer, California
‘06 Loglift 140 Stationary Ldr Item ID: 13275 Contact: Tom 800.315.9950 Ext. 604
www.LBXonline.com
‘05 JD 903G Feller Buncher Item ID: 13203 Contact: Sam 800.315.9950 x603 www.LBXonline.com
‘94 Prentice 410D Log Loader Knuckleboom Item ID: 13184 Contact: Sam Ph: 800-315-9950 x603
www.LBXonline.com
legal, rubber at 85%, and good brakes. Tows smooth. Equipped with Husky 175 loader. Has 3 knife disc with key knife system installed. Makes a super clean chip. Cab has heat and AC working well. Also has stereo radio and CB. New glass in
800.315.9950 x604
loader. External chute controls.
2001 Chevy C7500 Service Trk w/
Super Clean! - Item ID-12526 - Tom
Trailking Trailer - Great package.
800.315.9950 x604
Chevy truck has Cat 3126B engine.
2001 Timbco 820-D Forwarder -
28,877 miles. 22.5” tires are in good
Serial #TB154-012901. Hour meter
shape. Good steel flatbed with mini
reads 7075 but actual hours are
fifth wheel and headache rack. Trail
about 9500. Brand new Cummins
King Trailer Model # TK 32-2401.
260 HP Engine with Cummins
GVWR 40180 lb; GAWR 18160 lb.ea.
Warranty 1.5 hours on engine. New
with 215/75R X 17.5 (16PR); Floor
Coupler between Transmission
is a 60’s model Frost w 80% tires in
has top saw option. - Item ID-12849 -
19’ long; Tail 5’ long; Hyd operated
and Engine. New Pivot pins and
very good condition. Pulls great.
Tom 800.315.9950 x604
ramps 5’ long. Super package and
Bushings. 360 degree Supergrip
- Item ID-12893 - Tom 800.315.9950
2000 Peterbilt Sleeper Truck - Good
priced to sell!! - Item ID-12746 - Tom
Grapple. One Set Log Bunks. One
x604
running condition. Priced to sell.
800.315.9950 x604
Set Tracks - Item ID-13094 - Tom
2000 New Holland EC215 w/
- Item ID-12492 - Tom 800.315.9950
2001 Hydro Ax 721E w/Fecon BH120
800.315.9950 x604
Waratah 616 Processor - Approx
x604
mulching head - 8480 hours. John
2001 Timbco 820-D Forwarder - It
7200 hours. 2000 New Holland
2000 Prentice 625ATL Loader - All
Deere 200HP engine. Serial #7841.
has 21,000 hours on a Cummins
Model EC215 with Waratah 616
Terrain Loader. All wheel drive and
Fecon mulcher is a Model BH120
260hp engine. The pins and
Processing Head; Carrier in good
steer. Set up to pull loaded trailer.
HHD263, the serial # is 12HO17A2.
bushings are tight. Just put a new
condition. Tracks at 70% with 32"
Great yard machine. 10,800 hours.
The Fecon needs new bearings. 28L
swivel on the grapple. It has New
pads; Cummins 6BT5.9 engine
Cab access platform. Cab riser.
tires at 50%. Comes with a full set
hydraulic hoses, new drop heater,
with 154HP; S/N 721580; Operating
All maintenance history available.
of ring chains. INCLUDES BRAND
and new fuel injectors! Machine is
weight = 47000 lbs; Waratah head
FOB: Maine. - Item ID-12898 - Tom
NEW HD BRUSH GRAPPLE! - Item
working now! - Item ID-13217 - Chris
24 n
The Original Lumberman’s Exchange
Visit us online at www.LBXonline.com!
Timber Harvesting Equipment
Hahn HFP160 Firewood Pro
Hahn Machinery Inc, P.O. Box 220 • Two Harbors, MN 55616 www.hahnmachinery.com
T
urn your loader into a self-propelled firewood processor capable of picking logs out of the pile and cutting and splitting them onto the ground or conveyor or into a trailer, truck or bin. Operated by one person seated in the comfort and safety of the loader’s cab, the HFP160 is designed for commercial firewood operations and, when compared to traditional mechanical firewood processing methods can: • • • • • • • •
Reduce manpower requirements Reduce work comp costs Reduces fuel consumption Improve safety Provide greater mobility Dramatically reduce set up time Reduce handling of the wood Lower your cost per cord for an improved bottom line
The standard HFP160 is equipped with a 4-way splitter head with hydraulic height adjustment and 16” and 20” cut lengths. Optional interchangable 6-way and 8-way splitter heads and longer cut lengths are available. For the past 37 years, Hahn Machinery has been noted for offering simple, rugged, and productive forestry equipment and the HFP160 is no exception
For more information on the— HFP160 Firewood Pro
1-800-483-8825 for complete details on this or any Hahn firewood processor or forestry equipment call or email info@hahnmachinery.com For Classifieds Call Your LBX REP at 1-800-315-9950
May 2014 n 25
2002 Timberjack 608s with hot saw
Safety� Safe Durable� Durable
- approx. 6000 hours, Machine is in very good shape and has been well maintained. - Item ID-12194 - Sam
(262) 673-6801 Local
Comin gS 4 New oon Mode ls
Made inA the US
The Firewood Factory Lil’ Beaver Model Call for Free DVD
Starting at
8995
$
Beaver Model 18 Optional Features Available
800.315.9950 x603 2003 Cat 533 Hot Saw FB - 7500 Reliable� Reliable� Reliable
Convenience� Convenient
Features: • 1 to 2 plus full cords per hour (128 cubic feet) • Cuts up to 16” diameter and up to 20’ lengths • Splits wood up to 24” • Splitter cycle time 4-5 seconds • Honda Engine GX-390, Subaru 14hp or PTO driven • Super fast, Super Safe!
Call Toll Free
Nothing Eats Wood Like a Beaver 1-800-569-6813 www.woodbeaver.net | sales@rrsinc.net
™�
hours. 28L tires at 70%. Working today. - Item ID-13080 - Tom 800.315.9950 x604 2003 Franklin Q70 Grapple Skidder - Enclosed Cab W/Heat & A/C, 28Lx26 Tires 85% Rear, 70% Front, 100 Hours On Dealer Rebuilt Transmission, 600 Hours On Cummins Recon Engine 6BTA 200 H.P. Winch and Grapple. Excellent one owner machine! - Item ID-12337 - Tom 800.315.9950 x604 2003 Franklin Q80 Grapple Skidder - 7500 hours, but just 5000 hours on reman engine. New Radiator; New Hydraulic Pump; Comfort cab with good working heat and air; Tires at 80%. - Item ID-12450 - Tom 800.315.9950 x604 2003 Hydro Ax 670 with Bunching Head - Super nice machine with ONLY 1600 hours! 30.5 tires at 90%.
‘81 JD 850 Grapple Dozer
Running Today! Item ID: 13149 Contact: Tom Ph: 800-315-9950 x604
www.LBXonline.com
‘04 SMV Rottne Forwarder
Item ID: 13277 Contact: Tom Ph: 800-315-9950 x604
www.LBXonline.com
‘07 Woodmizer LT 40 Item ID: 13253 Contact: Sam Ph: 800-315-9950 x603
www.LBXonline.com
Cummins 6BT8.3 engine. AC/Heat. Side pocket style head. Jewel of a machine! - Item ID-12729 - Tom 800.315.9950 x604 2003 JD 648GIII Dual Arch Grapple Skidder - Refurbished with approx. 8000 hours. 30.5 x 32 tires at 50% or
Hot Saw - Only 2400 hours on Upper
better. The machine is dual arch w/
Saw - 8500 hours on machine.
which was replaced after burning
reman arch, boom, grapple, engine
800.315.9950 x600
About 3200 on new Cummins
at 2000 hours. Total hours on lower
and transmission. The machine
2001 Valmet 860.1 Forwarder - 6
engine. Quadco head has 40 degree
undercarriage is 4400 and has
also has had the normal repairs
Wheel Drive. Chains for most tires.
tilt and new saw blade. Tracks
been rebuilt. 70% life left on lower.
of: resealed all cylinders, pins and
17,000 hours. Runs good and is
at 60%. Rebuilt 2 years ago. Well
Customer has rebuilt the engine
bushings, center pins, cradle and
working today. Owner is upgrading.
maintained. Heat and A/C in cab.
with a new cylinder head, pistons,
addressed all electrical issues. Any
- Item ID-12867 - Tom 800.315.9950
- Item ID-12751 - Tom 800.315.9950
rings,bearings,gaskets, and fuel
potential problems were found and
x604
x604
transfer pump with only 700 hrs. on
fixed or replaced. Limited Power
2002 New Holland TV140 w/10’
2002 Timbco 425D w/Fabtek Proc.
rebuild.. Unit has a new saw disc on
Train Warranty. Can exchange
Brush Cutter - Only 3000 hours.
Head - Very nice machine and well
the 22” Quadco Hot saw with 360
existing tires for new and receive
Very well maintained. Brush
maintained. 11,229 hours, but only
degree wrist... Main boom to stick
credit on existing tires against new
Cutter has less than 500 hours.
1400 on recon Cummins engine. 24”
boom pin and bushings have been
tire price. Ex: add new 30.5 x 32
Complete with winch and forestry
Single Grousers. Undercarriage is
replaced in a the last 3 months
tires for $14,000. - Item ID-12905 -
package. Tires at 80%. Comfort
70%. Fabtek has been rebuilt and
and saw pump was installed about
Tom 800.315.9950 x604
cab with great visibility. Extremely
updated to make it stronger than
a year ago. THIS IS ONE OF THE
2003 JD 648GIII S/A Skidder - Super
productive and stingy on fuel. - Item
new. Head works great. - Item ID-
CLEANEST 2002 MODELS YOU
Clean JD 648GIII Single Arch Skidder.
ID-12414 - Tom 800.315.9950 x604
12659 - Tom 800.315.9950 x604
WILL FIND AT THIS PRICE! - Item ID-
S/N shows this is a 460 Timberjack
2002 Tigercat 845B w Quadco Hot
2002 Timbco 445D w/22” Quadco
12541 - Tom 800.315.9950 x604
direct drive skidder which is
26 n
The Original Lumberman’s Exchange
Visit us online at www.LBXonline.com!
Integrity • Precision • Quality • Value
Woodmaster See why we are your Best Source for bandsaw blades! We offer the highest quality welds and our people use the highest level of integrity and precision to give you the best bandsaw blades in the business—we ship all over the US. Satisfaction always guaranteed!
Thin Kerf
Band Saw Blades Ask About Our Dismanteling Blades
ck Cheut Our O
1-888-857-5153
Quality • Our Service • Our Price
MDI probe 2100
Portable Industrial Metal Detector Simple to operate –
just turn on and go! MDI’s Superior Digital Technology will detect an 8d nail buried 15" into a log! • Pre-set for maximum sensitivity with adjustable sensitivity control • Microprocessor controlled; eliminates mineral interference from logs or round for maximum detection depths • Bright L.E.D. display indicates signal strength and battery level • Touchpad control allows precision pinpointing of tramp metal P.O. BOX 26440 • EUGENE, OREGON 97402 PHONE: 541-345-7454 • FAX: 541-345-7971 www.metaldetectorsinc.com
“Providing a full range of industrial metal detectors since 1965.”
exactly the same as the JD 648 GIII.
valve for grapple. 73 x 44, 32 tires-
Selective use. 11,000 hours. Winch.
Runs good. Priced to sell! - Item ID-
28l x 26 tires at 90%! That’s about
12693 - Tom 800.315.9950 x604
$10,000 + in new rubber! Runs great.
2004 Fabtek 133 Harvester - 11,400
Well maintained. Engine rebuilt in
hours. One owner machine. Very
2013 with less than 100 hours. - Item
nice condition. Fabtek 4 Roller
ID-13087 - Tom 800.315.9950 x604
processing head. Pro Heat cold
2003 JD 650 G Dozer w/Winch
weather start system. One track
- Nice running condition dozer.
is brand new. Working today.
Hour meter broken. Estimated
Customer shutting down job. - Item
5000 hours. U/C in decent shape
ID-12950 - Tom 800.315.9950 x604
with newer sprockets and rollers.
2004 Franklin Q80 single arch
6 way blade. Winch with fairlead
grapple skidder with winch - 200
rollers. Great support tool for any
HP Cummins engine Powershift
logging job. - Item ID-13270 - Tom
transmission Comfort cab with
800.315.9950 x604
working heater and AC New
2004 Log Max 9000 Proc. Head -
www.LBXonline.com
2004 Barko 495 Loader w/Delimber
Manifold gasket and bolts New
Good running condition. Owner
part extendable K100 loader. (1)
- 11000 Hrs. New Turntable Bearing.
muffler New grapple head New
was processing 900 tons/day
new 750/50x26.5 tire Nov ‘13, (2)
Upper and Lower Valves Resealed.
shifter box Tires 85% 28L X 26 Good
when he shut down job. This unit
tracks rebuilt Nov 2012, (1) track
Both swing motors resealed. New
Solid Machine- Runs great! - Item ID-
is similar to Log Max 7000XT. Has
rebuilt Nov 2011, (1) track new Nov
pins and bushings in main and jib
12843 - Chris 800.315.9950 x600
optional top saw with it. Parts
2011, Hydrostats replaced 2010;
boom. CTR 450 Delimber. Cold AC.
2004 John Deere 700H LGP - This
are similar to 7000 Log Max as
New centerpin Nov 2011; New
- Item ID-12897 - Tom 800.315.9950
machine has 1987 hrs on a crate
well. Rebuilt every year. Many
front diff; all planetaries and bogies
x604
motor. Very Strong running
spare parts. Computer included.
inspected; Nov 2011. Hyd Pump
2004 Cat 535B Grapple Skidder - SIN
machine. Being used daily! Limb
Super Value! - Item ID-12929 - Tom
replaced 2010; Loader hoist and
AAE00566, 12,000 hours. Replaced
Risers, screens, 6 way blade,
800.315.9950 x604
stick cylinders repack/repaired Dec
center pins, repacked cylinders,
30” pads. - Item ID-13035 - Chris
2004 Ponsse Buffalo King Forwarder
2014; Drop box replaced 2010; New
and repaired hydraulic control
800.315.9950 x600
- 18 ton capacity. S/N 120001, 2
radiator June 2012. Approx 23000
Woodmizer LT40 Sawmill Item ID: 13266 Contact: Sam Ph: 800-315-9950 x603
www.LBXonline.com
For Classifieds Call Your LBX REP at 1-800-315-9950
‘99 Timbco 425D Harvester w/Keto 800 Item ID: 13150 Contact: Tom Ph: 800-315-9950 x604
May 2014 n 27
‘96 Valmet 603 3-Wheeled Buncher Perfect for Thinning! Item ID: 13155 Contact: Tom Ph: 800-315-9950 x604
www.LBXonline.com
Wanted: Bell Ultra C Feller Bunchers We have buyers looking for both track and rubber tired! Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com 800.315.9950 x603
total hours. Timbco clambunk
2005 Barko 595 Loader on SP
attachment with all plumbing made
Carrier - Loader on Big John
to attach to Ponsse frame (needs
Self Propelled Carrier. Carrier
clamps) - Item ID-13151 - Tom
is towable. Unit has 7900 Hrs.
800.315.9950 x604
Equipped with Live Heel and
2004 SMV Rottne Forwarder - 16
continuous rotation grapple. Has JD
Ton Capacity; 11,200 hrs; 8 new
185HP engine. Has Cab Riser with
tires; 1 set of tracks. Ready for
Tilt Option for easy transport. - Item
work! This machine is extra clean.
ID-12912 - Tom 800.315.9950 x604
One owner. A. Length = 31.5 ft
2005 Ecolog 580B Harvester - with
When You Buy Your Circular Saws From B.H. Payne You’ve Bought the best... We Guarantee It!
in/9600 mm. B. Width Over Tires
Log Max 7000 Processing Head w/
= 9.4 ft in/2880 mm. See specs:
Steel Rollers. Very good running
http://www.rottnecanada.com/
condition. S/N 240. 7700 hours.
Traditional Quality Combined With Todays Technology
rottne09Eng_ProductsSMV.html -
Recent updates include: New water
Item ID-13277 - Tom 800.315.9950
pump; New implement pump; New
x604
swing motor; New hydraulic oil
2004 Tigercat 240B Log Loader on
cooler and oil cooler bypass valve.
Trailer - Very clean. One owner
It has a DASA4 control system and
machine. Good maintenance. Tight
ICAN monitoring system. Rear
and dry. 7800 hours. Brand new
bogeys are 650 size and include
engine just installed! Planetary
one set of tracks. Engine is Cat
gears on swing just replaced. New
3126. Equipped with a Wabasto
main hyd. pump. Loading logs now.
preheater. Machine is factory
Cummins 5.9. - Item ID-12617 - Tom
reconditioned by Ecolog. Center
800.315.9950 x604
section and bearings are new. - Item
2004 Trail King belt trailer - 4690
ID-12826 - Tom 800.315.9950 x604
rated at 78 yds. The trailer is in
2005 John Deere 903G Feller
great shape for its age. It has a
Buncher - GN Roy 22'' continuous
shurco roll over tarp that will need
saw head. Heated & A/C cab.
attention but is in working order.
Standard boom. Medium pads.
The one piece belt is in great shape,
Operator, service, and parts books
no tears or rips and operates
included. - Item ID-13203 - Sam
flawlessly. Trailer will be sold as-is
800.315.9950 x603
for 30k. Also all 8 tires are near new
2005 Komatsu D39 PX Dozer
and just passed a DOT inspection
- Approx. 2150 hours, 6-way
station in feb. - Item ID-13173 - Sam
dozer, canopy, joystick controls,
Quality Brand Reg. U.S. Pat Off
Circular Saws Saw Bits and Shanks Circular Knives Carbide Tipped Saws Carbide Strobe ® Saws B.H. Payne & Company Saw Manufacturers
Call 800 752-0627 Make Sure To Ask For Our Free, Complete Saw Catalog We Manufacture & Sell Inserted Tooth Headsaws, Solid Tooth Saws, Inserted Tooth Cutoff Saws & Carbide Saws. We also Stock & Sell Bits & Shanks, Carbide Tips, Diamond Wheels, Knife Grinding Wheels, Saw Gumming Wheels & Knives.
Here’s What You Get With Every B.H. Payne Saw • Saws manufactured from only the Highest Quality Nickel Alloy Steel. • Each Saw Milled with State-Of-The-Art Precision CNC Milling Machine. • We Tension Your Saw to Your RPM Speed BEFORE Leaving Our Factory. • Your Satisfaction - Completely Guaranteed.
B.H. Payne & Company, Inc. P.O. Box 90608 East Point, GA 30364 404 761-8711 Fax 404 761-5398 “Since 1890” E-mail: info@paynesaws.com 28 n
Web Site: www.paynesaws.com
The Original Lumberman’s Exchange
Visit us online at www.LBXonline.com!
limb risers 25" pads, SBG,
- Item ID-12527 - Tom 800.315.9950
new hydrostats and pumps
x604
Undercarriage 75%, condition good
2005 Takeuchi Supertrack Skid
to very good - Item ID-12994 - Tom
Steer with B74 Fecon Head - 981
800.315.9950 x604
Hours. 102 HP Engine. New Tracks.
2005 Morbark Model 2755 Flail/
Fecon B74 Mulching head with new
Chipper - S/N = Q78. Hours = 6500.
teeth. Winch. Comes with spare 80"
Tires: 295/75R22.5. (Two) Cat
bucket. Half the price of new. - Item
‘79 Timberjack 230 Forwarder
engines: Model 3412 in front with
ID-12413 - Tom 800.315.9950 x604
Cheap and Runs Good!
860HP: Model 3406 in rear with
2005 Tigercat 718 FB w/5500
425HP. Originally came out as a 3
Saw Head - Very well maintained
flail converted to a 2 flail debarker.
machine with 9400 hours. Dry and
Item ID: 13057 Contact: Tom  Ph: 800-315-9950 x604
Handles up to 30" whole trees. Set
tight. 28L tires at 60%. Running
up for 2" chips. Recently came off
good today. AC blows cold. Heat
job. Well maintained and in good
works great. Center section tight.
Tracks for all bogies. 710/45-26 tires
Komatsu Dealer. Spare pump
condition. - Item ID-12690 - Tom
- Item ID-12939 - Tom 800.315.9950
at 70%. Includes bolsters and back
($7,000 value) Good running
800.315.9950 x604
x604
rest. Comes with 36" grapple with
condition. Sisu engine uses 4 gal/
2005 Prentice 280 TMS - Good
2005 Timberking TK360 Feller
grapple saw option. Set up with
hour. 16 ton capacity. Tracks
running machine. Hour meter
Buncher - Rubber tired, good
harvester hydraulics according
for front and back. Front blade.
shows less than 2000 hours but
condition 9023 hours, new A/C. 22"
to owner. - Item ID-13161 - Tom
Hood guard. - Item ID-12267 - Tom
owner believes it to have about
high-capacity head w/side cutter
800.315.9950 x604
800.315.9950 x604
6000. Machine s/n is PR59771. Unit
put on at 5000 hours. Front tires at
2005 Valmet 860.1 8-Wheeled
2005 Valmet 941 Harvester - Totally
has Cummins engine and runs good
75%, back tires 50% - Item ID-12995 -
Forwarder - 13,800 hours. New
refurbished head to toe! Very good
with no blow-by and has no leaks
Tom 800.315.9950 x604
hydraulic transmission and
running condition. Over $50,000 in
and is tight Dependable machine
2005 TimberPro 830TF Forwarder
gear box. $70,000 of updates
recent updates and maintenance.
that is priced right with the market.
- 6580 hours. Very good condition.
just completed by local Valmet/
New center pin bushings; new
www.LBXonline.com
For Classifieds Call Your LBX REP at 1-800-315-9950
JD 540B Cable Skidder Item ID: 13268 Contact: Sam 800.315.9950 x603 www.LBXonline.com
May 2014 n 29
Jackson Shavings Mill REduced
‘89 Timberjack 380 Grapple Skidder Pulling Logs Now!
2005 Jackson Shaving Mill, Model: 16 4D Mill is powered by a 3-phase, 30 hp motor; Hydraulic powered by a 3-phase 30 hp motor; The box was upgraded for hydraulic in place of chain driven; Comes with 6-sets of knives. Unit is in excellent condition! Comes with a Grizzly knife sharpener, conveyor, and forage box.
Item ID: 13143 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com just added 22 months ago and only has 2000 hours. 36" Triple Grouser
‘94 Barko 275B Loader Pkg. Runs OK: Low Price!
very stingy on fuel. 8' squirt at end
Item ID: 13085 Contact: Tom Ph: 800-315-9950 x604
of boom for 30' reach. Reversible
www.LBXonline.com
tracks at 60%. Sisu engine that is
fan and auxiliary oil cooler. - Item
Forage Box
REduced
Conveyor
Item ID: 12795 Contact: Chris Woods 800.315.9950 Ext. 600
www.LBXonline.com
ID-12266 - Tom 800.315.9950 x604
2006 John Deere 748GIII Dual
2006 Hydro-Ax, Model 764 w/
Arch Skidder - 8900 hours. Good
AX1910 Mowing Head - 4700 hours.
condition. Working today. One
Cummins engine. 30.5 x 32 tires
owner machine. Tight and dry. 32.5
at 60% or better. Includes tire
tires at 50%. - Item ID-12542 - Tom
chains for all tires. Good running
800.315.9950 x604
condition. Well maintained. - Item
2006 Loglift Model 140 Stationary
ID-12987 - Tom 800.315.9950 x604
Loader - Like new; Actual unit
2006 JD 648GIII Grapple Skidder
is on pallet and ready to ship as
- 9400 hours on good running
seen in other photos. Less than
machine. Sweda Axles with 28L &
1500 operating hours. Comes
23.1 Duals. Winch. Recently rebuilt
with complete power pack for
JD engine. Dual Arch Grapple.
running machine. Includes stainless
Heat and AC. - Item ID-13088 - Tom
steel operators cab with joystick
800.315.9950 x604
controls. 30' reach. Continuous
2006 JD 748GIII Grapple Skidder -
bypass grapple. Loglift is the
7200 Hours; New JD Transmission
highest quality loader made in
at 6500 hours; A/C and Heat work
Europe. Parts readily available in
well; 30.5 x 32 tires @ 40%; No winch
US. Lift capacity of about 2200 lbs
but has the controls in cab; Heavy
at max reach. Smooth on demand
duty Sweda axles. - Item ID-13120 -
hydraulic system. Priced at a
Tom 800.315.9950 x604
fraction of new. - Item ID-13275 -
2006 JD 843J Feller Buncher - 2006
Tom 800.315.9950 x604
John Deere 843J Wheeled Feller
2006 Peterbuilt Log Truck w/Loader
Buncher; 6775 hours ; 20 ply 28L26
& Pup - Rosa aluminum crib pup
tires @95%; John Deere FD22B
trailer. Has Rotobec Model 80 elite
hot saw. Runs Good. Chains not
loader. Cummings motor with
included. Well maintained. - Item ID-
450,000 miles. Excellent shape.
bogey seals; valves resealed; all
hard to find gem and priced below
13258 - Tom 800.315.9950 x604
Hauling logs today. - Item ID-13018 -
cylinders packed. 10,200 hours.
market. - Item ID-12569 - Tom
2006 JD 848 Grapple Skidder - 6500
Tom 800.315.9950 x604
Largest of rubber tired harvesters.
800.315.9950 x604
hours. Very strong machine. 30.5
2006 TF 810 TimberPro Forwarder
Has Valmet 370.2 processing head
2005 Valmet/Timbco 415 Harvester
Tires...3 at 50%, one at 90%. Dual
- w/ Cold Weather Package Start.
with less than 4000 hours. Engine
with 370E Head - Very nice unit.
rings on rims. - Item ID-13175 - Tom
6744 hours. 260 HP Cummins. One
runs well. Tires at 50%. This is a
7400 hours. 370E Harvesting head
800.315.9950 x604
set tracks at 60%. 700/50 tires @
30 n
The Original Lumberman’s Exchange
Visit us online at www.LBXonline.com!
AJD Forest Products
Premium Kiln Dried Hardwoods Northern Red Oak is Our Specialty Lake States Largest Producer of Industrial Lumber P.O. Box 629 • Grayling, MI 49738 • (989) 348-5412 • FAX: (989) 348-2500 Email: fred@ajdforestproducts.com • Web: www.ajdforestproducts.com
Dry Kilns • 2 Sawmills • 25,000,000 BF Annual Production
‘06 JD 648GIII Grapple Skidder Duals not included Item ID: 13088 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com
‘01 Timbco 820-D Forwarder Item ID: 13094 Contact: Tom Ph: 800-315-9950 x604
www.LBXonline.com
60%. Very good running condition.
working hours; 700HP C-18 CAT
- Item ID-13114 - Tom 800.315.9950
Engine; Twin Disc Hydraulic Clutch;
x604
Air Compressor; Reversible Fan;
2006 Tigercat 630C Grapple Skidder
Remote Control; IQAN Controls;
- Decking blade, new a/c installed,
Magnetic head Pulley; Excellent
new hydrostats; Dual function
condition! - Item ID-12628 - Tom
grapple, 40K Allied winch; 30.5L32
800.315.9950 x604
tires, 3 @ 75%, 1 @ 20% Condition
2007 Case 1150K Dozer - 2565 Hours
good to very good, Approx.
on very strong dozer. Case 130HP
6900 hours - Item ID-12996 - Tom
engine. Open ROPS cab. 24" pads;
800.315.9950 x604
Rock Guards; Canopy Brush Guard;
2006 Tigercat 720D Feller Buncher
Hydraulic PTO; Runs strong and
- New Cummins Engine, Enclosed
priced to sell. - Item ID-12348 - Tom
Cab heat & air, 28.1 x 26 Tires, 5000
800.315.9950 x604
800.315.9950 x604
2007 Liebherr A924 Log Loader -
series sawhead. 7012 hours. Very
2007 Dodge Service Truck - 5.9L
2007 Hood Model 182 Loader on
Rubber Tired, 9300 hours. Good
good condition. S/N 7204313 - Item
Cummins. This is the last of this
Carrier w/Slasher - Super Clean
running condition. Hydraulic raising
ID-12752 - Tom 800.315.9950 x604
kind of engine. Includes tools,
Hood Model 182 Loader mounted
cab. Rotobec Grapple. Approx
2006 Valmet 890.3 Forwarder - Well
fuel tank, spare parts, and air
on Hood self-propelled and towable
42' reach. - Item ID-13154 - Tom
maintained 20 ton forwarder by
compressor. Super Package! - Item
carrier. Includes Hood circle saw
800.315.9950 x604
Valmet. Has 13,700 hours. Very
ID-12910 - Tom 800.315.9950 x604
slasher package. Approx. 6700
2007 Liebherr A924B Wheeled Log
good running condition. Front hood
2007 Fecon FTX440 w/Fecon BH 350
hours. Excellent running condition.
Loader - 10,100 hours. Very Good
guard and two complete sets of
Mulcher - Totally rebuilt in 2009 by
Hard to find loaders equipped
Condition. Liebherr makes the
tracks included. Located on West
Fecon with all 2009 updates. 1670
like this. AC and Heat inn Cab.
highest quality heavy equipment in
Coast. Priced to sell! - Item ID-12709
hours. Cat 440 HP Engine; Heavy
Joystick controls. JD 6068T engine.
the world. This unit can go another
- Tom 800.315.9950 x604
Duty Winch; Triple grouser high
Includes $600 in filters for complete
20,000 hours. 44' reach with over
2007 Bandit Model 3680 Beast
flotation tracks; Excellent condition.
servicing. - Item ID-13082 - Tom
7000 lb capacity at 40'. Hydraulic
Grinder - Only 780 confirmed
Priced to sell! - Item ID-12632 - Tom
800.315.9950 x604
raising cab for 16' 8" operator eye
For Classifieds Call Your LBX REP at 1-800-315-9950
May 2014 n 31
Reconditioned Electrical Equipment Saves You Money, Big Money! VFD Control
‘08 Ponsse Elephant Forwarder
We Buy, Sell, or Rent— Used, Obsolete and Hard to Find Industrial Electrical Equipment
Many Items In Stock Ready for Immediate Shipment!
Automatic Reduced Voltage Starter
Item ID: 13163 Contact: Tom Ph: 800-315-9950 x604
www.LBXonline.com
All Sizes of Motors
800.315.9950 x604 2008 CTR 450 Delimber - Like new.
Manual Transfer Switch
Combination Starter
Used for less than 100 hours. Paint still on unit. Compare to new 450 at $34,000. No description needed.
When you need it Now— And at the Best Price! You Need Weaver Electric Motor Control Starters (Solid State)
18-ton Capacity!
Consider like new. - Item ID-12900 Tom 800.315.9950 x604 2008 JD 2054 Log Loader - 15,000 total hours, but 9000 estimated working hours. New Undercarriage
Disconnect Switch
except for tracks. 34' live heel boom. Continuous rotation grapple. Cab Riser with tilt cab and guard.
Call Today!
- Item ID-12967 - Tom 800.315.9950
Toll Free 800-257-0038
x604
Ph: 303-288-0746 • Fax: 303-288-0218 6591 N. Washington, Denver, CO 80229 Web: www.weaverelec.com Email: spark@weaverelec.com
2008 JD 2554 Loader w/Waratah 624 - 2008 John Deere Model 2554 Hi Rise tracked carrier with the Waratah Model 624 processing head. 8773 Hours. Cab riser.
level. Front blade for pushing or
2006 John Evans trailer with 75% 11-
Extreme Harvester - Only 4000
Undercarriage at 60% as inspected
cleaning road debris. Grapple NOT
22.5 tires. Includes CTR Delimber.
hours on this special machine. Has
by local dealer. Currently running
included. Travels up to 12.5 mph
Condition is good - Item ID-12997 -
new Log Max 6000 added in 2013.
and producing over 20 loads/day.
with variable speed hydraulic
Tom 800.315.9950 x604
Individual tracks on each hub allow
- Item ID-13235 - Tom 800.315.9950
transmission. Super smooth
2007 Tigercat 718E Feller Buncher
this machine to climb where NO
x604
hydraulics make this a great wood
- with 5000 Bunching Saw Head.
OTHER MACHINE can go! 4 New
2008 JD748 H Grapple Skidder -
yard machine. - Item ID-12503 - Tom
8900 hours. Very well maintained.
700 tires and rims come with it for
Good running machine. Used on
800.315.9950 x604
Good running condition. Cummins
rubber tired operation. Recently
job with three shifts so hours are
2007 Prentice 384 TMS Loader
engine. Tight and dry. 28L x 26
gone through and updated. Very
15,000. 43" flotation tires at 50%.
Package - 2384 t/a trailer mounted
Tires at 50%. 1000 hours on rebuilt
unique and hard to find a machine
Just finished going through shop.
log loader Cummins 6-cyl engine.
engine. - Item ID-12989 - Tom
like this! Priced well below market.
All functions working well. - Item ID-
New injectors and pumps in Jan '13.
800.315.9950 x604
Sold new without head in 2008
13064 - Tom 800.315.9950 x604
New a/c installed, 32' length boom.
2007 Valmet/Komatsu Model 911
for $575,000! - Item ID-12571 - Tom
2008 John Deere 344J - Only 900
32 n
The Original Lumberman’s Exchange
Visit us online at www.LBXonline.com!
BANDSAW BLADES
We have the most popular sizes in stock & ready to ship from major manufacturers, including…
We also offer expert Sharpening Services, plus…
Gang • Edger • Scragg Trim • Split • Strob …and
just about any Custom Saws you need to keep you cutting longer… for less!
Welded to your lengths! Call Marvin Miller for a quote 231-924-5953 • (fax) 231-924-6166 • 11606 Brickyard Rd. • Holton, MI 49425
Vista
ID-13152 - Tom 800.315.9950 x604
“A
NGLE
2010 JD 848H Grapple Skidder
S” S O B
- 5000 hours. Running duals at this time. Powerful machine. Everything working great. Tires at
Up-Cut Saws Your solution for: • Speed and accuracy • Safety—two-hand cycle control—non-exposed sawblade in its rest position-material is held firm by guard/ clamp assembly while cutting is performed
50% or better. - Item ID-12800 - Tom 800.315.9950 x604
2007 Liebherr A924 Log Loader
Call today and let the “ANGLE BOSS” help solve your production dilemmas!
Vista Machines Inc.
19 Monarch Street • Littlestown, PA 17340 Tel: (717)359-9212 • Fax: (717)359-4222 • www.angleboss.com
- Super Clean machine. 8 Wheeled. Only 5800 hours. One owner and
Priced to Sell!
well maintained. Hard to find them
Item ID: 13154 Contact: Tom Ph: 800-315-9950 x604
with low hours like this! - Item ID12947 - Tom 800.315.9950 x604
www.LBXonline.com
Package - Super clean loader/
• Ease of Operation
• Mitering capability: Left & Right axis rotation of sawblade up to 75o from center • Also available bevel capacity: Blade can lay over to the left up to 45o from zero • From basic manual machines to fully CNC-controlled cut-off systems
2010 John Deere 1110E Forwarder
2010 Prentice 2280 TMS Loader delimber package on trailer. Just
75hp electric motor; 440v. FOB:
4400 hours. Cummins engine. CTR
Georgia 8000 hours. Maintenance
delimber works great. AC/Heat/
records available. Mill closed.
Radio in cab. Engine runs great with
Machine working well when mill
no blow by. Tight and dry. - Item ID-
ended operation. - Item ID-13017 -
12871 - Tom 800.315.9950 x604
Tom 800.315.9950 x604
2010 Prentice 2670 w/Single Post
2008 Prentice 2670 Feller Buncher -
Saw Head. - Only 3199 hours.
2008 Prentice 2670 Cutter: 28L tires,
Cummins engine. 30.5 x 32 tires
SH56 hot saw head, 5.9 Cummins
at 40%. Single post saw head.
engine. - Item ID-13190 - Sam
Great Value! - Item ID-12552 - Tom
800.315.9950 x603
800.315.9950 x604
2008 Valmet 415 Harvester - Very
2010 Tigercat 630D Grapple Skidder
Hours!! Great running condition,
to sale. Has been professionally
nice machine. 5500 hours. Valmet
- Super nice, 5589 hours. NEW 35.5
z-bar, 3rd valve, ride control, intake
maintained. - Item ID-13163 - Tom
380 Processing head recently
Firestones. Cummins engine. Dual
heater for cold weather starting,
800.315.9950 x604
rebuilt and running good. 24"
Arch HD Grapple. Winch. Excellent
heat/ac, stereo - Item ID-13034 - Sam
2008 Ponsse Ergo Harvester - Very
pads on 60% undercarriage. Heat
condition. Runs great! - Item ID-
800.315.9950 x603
clean unit with just 8600 hours.
and air work well. Sisu engine is
12738 - Tom 800.315.9950 x604
2008 Ponsse Elephant Forwarder
Equipped with the advanced
stingy on fuel. - Item ID-12866 - Tom
2010 Valmet/Timbco 445FXL w/
- Ponsse Elephant Forwarder with
Ponsse H-7 Head and C-4 Boom.
800.315.9950 x604
Roy Saw Head - HD Komatsu
18 ton capacity. 8 Wheeled with
One owner. Well maintained. Tracks
2010 CAT D9T with Chip Blade -
undercarriage at 50%. Just 5750
ONE set of tracks with machine.
for bogies. Superior Value - Item ID-
Cat D9T Dozer with wood chip
hours. Many extras. Cold weather
Hood guard. 11,400 hours, working
13060 - Tom 800.315.9950 x604
arrangement. Back up Alarm.
start. Deluxe heated seat. GN Roy
today. Machine will have gone
2008 Prentice 2210 Stationary
Product link; 27" tracks; 9SU
Hi-Speed Disc Saw head with 360
through professional shop and
Mount Loader - stationary electric;
Blade with edge group. Oil change
degree rotation. Fire Suppression
will be painted to look new prior
features joystick operation and
system. Rear counterweight. - Item
Pkg. Very good condition. Well
For Classifieds Call Your LBX REP at 1-800-315-9950
May 2014 n 33
Baler&Baggertm Save $$$ on Bedding—Bale it Yourself! Electric or Diesel, Manual or Automatic
Now One Phone Puts You in Touch with the Single Source for all your Sawmill Needs!
$15,905 Effective May 1, 2012
Corley Sawmill Machinery Tyrone Berry Carriage Drives Lewis Controls Optimization
REAL TUFF INDUSTRIES Manufactured by M & F Gauge & Specialty Co., Inc.
PO Box 693 Brownwood, Texas 76804 Phone: 325-641-8300 Fax: 325-643-3243
BUILT TO LAST www.realtuffbaler.com
Dear Prospective Customer,
Thank you for inquiring about our Real Tuff Baler! From baling wood shavings to aluminum cans, the Real Tuff Baler is built to last, and priced for a quick return on your investment!
Real Tuff Baler
Real Tuff Baler Dimensions & Specifications
• Easy to use
- (2) Hydraulic Cylinders are controlled by using a two spool valve
• Built of high quality materials and workmanship
- 30 H.P. motor (220/440 volt 3 phase) starter not included
• Heavy duty to enable a broad spectrum of baling options • Easily loads by conveyor or manual method
- 25 G.P.M. Pump - 50 Gallon reservoir capacity
. Easy to use
. Built of high quality materials and workmanship
- Only the highest quality industrial components are used
. Heavy Duty to enable a broad spectrum of baling options . Easily loads by conveyor or manual method Most Popular Baler Sizes
Real Tuff Industries Real Ruff Baler Size 12” x 16” x 36” 12” x 16” x 32” 11” x 17” x 36” 8” x 18” x 36” 5” x 10” x 16” - Call For Price
Bale Size
4.0 cubic foot bale 3.5 cubic foot bale 3.9 cubic foot bale 3.0 cubic foot bale 0.4 cubic foot bale
Bales per Hour
50 - 60 bales per hour 50 - 60 bales per hour 50 - 60 bales per hour 50 - 60 bales per hour 50 - 60 bales per hour
Phone: (325) 641-8300 Fax: (325) 643-3243 . Custom baler’s can be manufactured to your specifications .
Real Tuff Baler Dimensions & Specifications Manufactured by M & F Gauge Specialty Co., Inc. 2 - Hydraulic& Cylinders are controlled by using a two spool valve 30 H.P. motor (220/440 volt 3 phase) starter not included PO Box 693 • Brownwood, Texas 76804 25 G.P.M. Pump 50 Gallon reservoir capacity Only the highest quality industrial components are used www.realtuffbaler.com
Carriage Linear & Set Shaft Lewis Controls “Electronics for sawmills by sawmillers” Tyrone-Berry Carriage Drives & Parts • Headrig Slabbers Log Turners • Bandmills & Linebar Resaw Systems Board & Gang Edgers • Trimmers
The Most Complete Line of Sawmill Machinery Since 1905! Single Machine or Complete Turn-Key Operation More Production & Profit is Only One Call Away For Parts, Service & Sales
Call (423) 698-0284 CORLEY mfg
Real Tuff
www.corleymfg.com • sales@corleymfg.com
Real Tuff Baler Price: $12,997.00 Terms: 50% deposit upon receipt of purchase order. The blance is due upon completeion which will be approximately thirty days from placement of order. F.O.B. Brownwood.
03/08
1989 JD 540D Cable Skidder Item ID: 13146 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com
this is an economical and quiet way
Item ID-12801 - Tom 800.315.9950
to handle it. - Item ID-12705 - Tom
x604
800.315.9950 x604
2011 Puma 612 Forwarder - under
2011 Case TR320 Tracked Skid Steer
4000 hours. The machine has the
Mulcher - 2011 Case Skid Steer
new Barko 612 cooling package
with mulching head and bucket.
update + some other minor repairs.
Timberjack 230 Cable Skidder
Only 300 hours and in excellent
Volvo 220HP engine is very fuel
condition. Skid Steer has Hi Flow
efficient. 12,000 lb capacity. Comfort
option for maximum performance
cab. Kesla Loader and Supergrip
Item ID: 13144 Contact: Tom Ph: 800-315-9950 x604
to head. - Item ID-13020 - Tom
grapple. Very good running
800.315.9950 x604
condition - Item ID-13091 - Tom
2011 JD 1010E 8-Wheeled Forwarder
800.315.9950 x604
www.LBXonline.com
- Super Nice Machine! Just 2300
2011 Puma 612 Forwarder - Has
hours. Owner downsizing. Comes
new cooling system installed along
maintained. - Item ID-13023 - Tom
Loader - Model 60 Built-Rite
with new set of tracks and set
with other minor repairs. S/N =
800.315.9950 x604
Stationary Electric Loader. New
of chains. - Item ID-12955 - Tom
F6121004110414. 3600 hours. Volvo
2010 Woodsman 440TL Tracked
Condition with only 95 actual
800.315.9950 x604
200HP Tier III engine. Tires: 28L x
Chipper w/Loader - ONLY 1700
hours. The Model 60 has 18’ of
2011 JD 748H Grapple Skidder - 4600
26 front; Nokian 710/45x26.5 rear.
hours. Contractor finished job.
reach and about 1,100 pounds of
hours. Good running skidder. 30.5
All at 70%. Front Blade; 12,000 lb.
Operator controls entire operation
lift at full reach, with the grapple
tires at 60% with dualing rings.
capacity. Cab w/Heat and AC. Kesla
from cab. 700 HP Cummins engine.
attached. The grapple is a ¼ cord,
Dual arch grapple. Heat/AC. Well
Crane and Hultdins grapple. FOB:
50" mill. High flotation 36" triple
butt styled with gripping bars. It
maintained. - Item ID-13176 - Tom
Rhinelander, WI. - Item ID-13092 -
grouser pads on 80% undercarriage.
opens to 66” and is 20” wide. This
800.315.9950 x604
Tom 800.315.9950 x604
Super Package. Sold new at over
package includes everything from
2011 JD 848H Grapple Skidder - Just
2011 Remanufactured KMC Tracked
$500,000. - Item ID-12665 - Tom
the power pack to the comfort cab
3200 hours. Excellent condition.
Grapple Skidder - Model #42 KMC
800.315.9950 x604
with head and AC. If you have a
Running duals for high flotation.
Model 2500P ( Dual Arch Grapple)
2011 Built-Rite Model 60 Stationary
loading challenge in your operation,
Dual Arch. Winch. Comfort cab! -
Track Skidder. Cummins 6BTA (174
34 n
The Original Lumberman’s Exchange
Visit us online at www.LBXonline.com!
Every Reputable Wide Band Supplier Offers
Over 26 years in Business See us at the – 2014 Vermont Expo May 9-10, 2014 Essex Junction, VT
We Now Have
8
DVDs Available
Models to Choose From
3 High Quality Swedish Steel 3 3” – 8” Band Width 3 16 to 20 Gage 3 Double Cut Options 3 Choice of Swage or Stellite
WOLVERINE
BUT ONLY THE BY MENOMINEE SAW GUARANTEES • Cutting Edge Plasma Welds • The Industry’s Highest Band Saw Capacity • Quick Delivery from our HUGE Inventory • Fast Sharpening & Exchange Program to Keep YOU Running • Competitive Pricing
(8 Models)
12', 20' and 30'
And ONLY Menominee Gives You Everything You need in a Wide Band Saw – Plus Expert Service from the Industry’s Most Knowledgeable Staff. Got a Wide Band Problem? Call Menominee Saw Today and You’ll Learn Why More Mills Trust the Pro!
TOLL FREE 1-800-582-0470 ‘11 Puma 612 Forwarder Item ID: 13092 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com
‘04 JD 648GIII S/A Skidder New
Item ID: 13087 Tires Contact: Tom Ph: 800-315-9950 x604
900 16th St., Menominee, MI 49858 Tel: 906-863-2609 Fax: 906-863-1147 Email: info@menomineesaw.com
WWW.MENOMINEESAW.COM updates according to owner.
on proper carrier. - Item ID-13074 -
Compare to new at $600,000! - Item
Tom 800.315.9950 x604
New. KMC Wear Resistant Tracks &
ID-13029 - Tom 800.315.9950 x604
2012 Refurbished FMC 210 Tracked
Sprockets . Torsion Bar suspension.
2012 Lamtrac 8400T Mulcher -
Skidder - 1976 Model that has been
HP). - Clark 28000 Series Powershift
Heavy Duty Cast Steel KMC Road/
just 25 demo hours. Full Factory
totally refurbished in 2012. No
Transmission. John Deere Model
Idler Wheels. Standard Decking
Warranty remains. Cummins 400HP
hours since updates were done.
40 Winch (40,000 lb line pull).
Blade. FOB: BC, Canada INCLUDES
engine. Lamtrac known as best
Includes warranty on machine and
Hydraulic operated controlled
ONE YEAR LIMITED WARRANTY!!
performing carrier on market. Great
tracks. Detroit 6V53 engine with
Steering Differential. Planetary Final
- Item ID-12549 - Tom 800.315.9950
serviceability. Spacious operator's
195HP. Clark 28000 Powershift
Drives. - ESCO Dual Arch Grapple.
x604
station. Spec sheet available at
transmission. Clark 40,000 lb Winch.
- Fully enclosed Hi-Vis Cab c/w
2011 Valmet 430FXL w/ Keto 870TS
www.lamtrac.com - Item ID-13272 -
ROPS Cab. Includes bolt on grapple
Heater, Air Conditioning, Lights,
Proc. Head - 2011 Valmet 430FXL
Tom 800.315.9950 x604
head with full function. New Paint.
Swivel Suspension seat c/w Joystick
with Komatsu built undercarriage.
2012 Log Max 7000C Processing
- Item ID-12731 - Tom 800.315.9950
Controls. - Pilot operated closed
Includes KETO Model 870TS
Head - Only 865 hours. Like new
x604
center Hydraulics. Sundstrand
Processing Head. Less than 3000
condition. All components included
2014 John Deere 548GIII Skidder - 60
Sauer 45 Series Pump: - DanFoss
hours on total machine. Excellent
such as Log Mate 402 computer and
Hours, still under factory warranty,
Model L90LS 5 spool control valve -
condition. Head will have all
Super Grip handles. Ready to install
way below dealer cost - Price
www.LBXonline.com
For Classifieds Call Your LBX REP at 1-800-315-9950
May 2014 n 35
The Richmond Show EXPO RICHMOND 2014
Richmond Raceway Complex * Richmond, Virginia Friday May 16th 9:00a.m. until 5:00p.m. and Saturday May 17, 2014 9:00a.m. until 3:00p.m. The 34th East Coast Sawmill and Logging Equipment Exposition
‘07 Prentice 384 Loader Pgk. Loader/Del/Trailer!
Item ID: 12997 Contact: Tom 800.315.9950 Ext. 604 will be 2014’s largest collection of sawmill, logging, biomass, pallet and related manufacturing equipment, supplies and services in the Eastern United States. Nearly 300 exhibiting companies and thousands of forest products industry people will convene for the 34th Richmond Show. The newest and most advanced machinery, equipment and technology in the industry will be on display. There will be acres of active hands-on machinery and equipment demonstrations outside, plus hundreds of indoor displays of new products, methods, technology and trends. Examine and compare products or services before making your
purchasing decisions to improve the efficiency - and profitability - of your operation. Don’t miss this opportunity to invest in your future. Please fill out and return the pre-registration form below to the exposition office by April 1, 2014. Confirmations will be mailed to all pre-registered individuals no later than May 4, 2014. There is no charge to attend the exposition if you pre-register; there will be a $10.00 charge for those who register on-site. For further information, please call (804) 737-5625.
www.LBXonline.com Extec Shredder - Extec shredder. Please call Daren at Ext. 603 for more details. - Item ID-12926 - Sam 800.315.9950 x603 2003 Franklin Skidder - Model
E X P O R I C H M O N D 2014
Co-sponsored by Virginia Polytechnic Institute & State University Cooperative Extension and Virginia Forest Products Association
Return by April 1, 2014 to: EXPO RICHMOND 2014 • P. O. Box 160 • Sandston, VA 23150-0160 Please fill out completely and legibly. Incomplete or illegible forms can not be processed.
Only industry personnel should complete this form. Please copy this form for additional registrants. Spouses and children under 18 will receive passes at the entrance gate which will allow them to enter the exposition free of charge.
Your Name:
Nickname:
Company:
Title:
Q70-M31A, Enclosed Cab W/Heat & A/C, 28Lx26 Tires 85% Rear, 70% Front, 100 Hours On Dealer Rebuilt Transmission, 600 Hours On Cummins Recon Engine 6BTA 200 H.P. Excellent one owner machine!
Address:
- Item ID-12152 - Tom 800.315.9950
City:
State:
Telephone:
FAX:
E-mail:
ZIP:
x604 JD 643D Saw Head FB - Decent
Country (if not USA): PLEASE CHECK ALL CLASSIFICATIONS OF INTEREST: -- (You must check at least one) G Dealer Sales G Paper/Pulp G Other (Please Specify) :
G Sawmilling G Logging G Pallet Production/Recycling G Equipment Manufacturer G Plywood/Panel
Pre-registration allows entrance to the Exposition (May 16 - 17, 2014, 9am-5pm) at no charge. On-site registration is $10.00. Exhibitors: Please do not use this form. Contact show office for exhibitor registration information. Additional information is available on the Internet at www.exporichmond.com Educational Course Thursday, May 15, 2014 Two half-day workshops will be held on Thursday, May 15, 2014 on “Improving The Quality of Lumber Drying” and “Financial Management for Forest Products Business” at the Four Points by Sheraton. Lumber drying operations, no matter the size, must provide a good quality product to maintain their customer base. Drying defects not only lead to product value losses but if passed onto the customer can lead to lost sales. The morning workshop is designed to assist anyone drying lumber from the small-scale lumber dryer to commercial drying operations. The techniques and information presented are relevant to both hardwood and softwood lumber drying operations. A good understanding of financial management is critical to manage and control the business. During the afternoon session, participants will start with a business simulation that will help you to understand financial statements including specific terminology. Participants will also learn to analyze financial statements uncovering current problems or discovering potential business opportunities. For registration information ONLY FOR THE SEMINAR, contact Angie Riegel at the Department of Wood Science and Forest Products at Virginia Tech; Telephone: (540) 231-7107; fax: (540) 231-8868; e-mail: ariegel@vt.edu Note: Angie Riegel provides registration information ONLY for the seminar - NOT for the exposition. You must register for the each event separately.
machine. Estimated 1993 model. S/n available for verification. Recent JD recon engine. Tires at 60%. Cameco Saw Head. Needs new teeth. AC works. Running today. Priced to move. - Item ID-12845 - Tom 800.315.9950 x604 John Deere 540B Cable Skidder Ring chains on front 90%, Ice Chains on rear 90%. Front tires @ 20%, rear tires @ 80%. Power shift trans., open cab,stacker blade on front, 8 slides
Reduced! - Item ID-13182 - Sam
cones. Excellent condition. Located
are good. - Item ID-12202 - Chris
on cable, hydraulic lock out for
800.315.9950 x603
Southern NY. - Item ID-13096 - Chris
800.315.9950 x600
easy winter starting! - Item ID-13268
210 Prentice Loader - 353 detroit.
800.315.9950 x600
Cat D5B Dozer - Cat D5B s/n 22X380,
- Sam 800.315.9950 x603
Runs and operates. Has some leaks
Case 1150 Dozer - OROPS Cab;
direct drive, EROPS, S-Dozer w/
Timberjack 230 Cable Skidder -
from sitting for years. Good bucket
6-way Angle blade, Hyster
tilt.; Limb risers; Hyster Winch,
Older Skidder with 18.4x26 tires.
and pins. Includes trailer. - Item ID-
winch; Limb risers; Serviceable
serviceable u/c - Item ID-13113 -
Detroit 3-53. All functions work.
13249 - Chris 800.315.9950 x600
Undercarriage. FOB: West Texas -
Tom 800.315.9950 x604
Priced to sell. - Item ID-13144 - Tom
84 Eager Beaver Trailer - 9' wide
Item ID-13112 - Tom 800.315.9950
Dorsey Drop Deck Trailer - 45' Long.
800.315.9950 x604
by 48' long. Detached front, middle
x604
Heavy Duty Ramps. Good Michelin
drop is 26 feet. Load from the
Cat 518 Grapple/winch Skidder -
Tires. Currently in use and has
2010 Wood-Mizer LT-70 - 2000 hours,
front or back. Tires and brakes
Late 80's 4WD Drive; Cat winch,
carried (2) Cat 518 skidders with
fully hydraulic, Debarker, auto
are 80% sand blasted painted,
maintained machine.; 30.5 x 32
no problem - Item ID-12662 - Tom
clutch, lubemizer, trailer package,
everything goes, chains, binders,
Tires, 95% rubber. 130-hp, all pins
800.315.9950 x604
diesel engine, 18 foot roller
36 n
The Original Lumberman’s Exchange
PORTABLE SAWMILL
Visit us online at www.LBXonline.com!
discharge. Great condition! - Item ID-13250 - Chris 800.315.9950 x600 Woodland K4 Industrial Portable Sawmill - vertical band with built in edger, includes two 38.5 Kubota Diesel engines, all hydraulic, Also has a 22' 3 strand live deck w/ kicker and log turner. Machine is ready to go! - Item ID-13263 - Chris 800.315.9950 x600
RECYCLING EQUIPMENT
2006 W. S. M Brute Horizontal Grinder - 2006 West Salem Machinery Brute Horizontal Grinder; Model 3456HB. This is a tier 2 machine and meets all current California emission standards. Equipped with a Cat 540 horse power C-15 diesel engine. This unit has been serviced and well maintained. It has approximately 8700 hours. The clutch and electronic brain have been recently replaced. Located in CA. Priced to sell!! - Item ID-12691 - Tom 800.315.9950 x604 1987 Morbark 27 WCL NEEDS MOTOR - 1987 Morbark 27 WCL, Morbark 1000 Knuckle boom loader, 3 knife disc, Newer discharge chute, New banding around disc, Brakes and tires are also OK, Everything
‘06 JD 848 Grapple Skidder
Item ID: 13175 Contact: Tom Ph: 800-315-9950 x604
www.LBXonline.com
‘99 Timbco 425 Valmet 500 Harvester
Complete 3-Head Block Helle Sawmill
Priced to sell! See more photos online!
Item ID: 13140 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com
Item ID: 13122 Contact: Tom Ph: 800-315-9950 x604
& SHIELDS. ENGINE GAUGE PANEL
Engine; Twin Disc Hydraulic Clutch;
Tracks at 50%. Includes winch. Full
& EMERGENCY SHUT DOWN
Air Compressor; Reversible Fan;
protection comfort cab with AC/
Chipper - S/N = Q78. Hours = 6500.
SYSTEM LOCATED IN AN ANTI-
Remote Control; IQAN Controls;
Heat. Bradco mulching head. Needs
Tires: 295/75R22.5. (Two) Cat
THEFT CONSOLE. ELECTRONIC
Magnetic head Pulley; Excellent
some work, but priced to move! -
engines: Model 3412 in front with
RPM SENSOR & AUTO FEED
condition! - Item ID-12628 - Tom
Item ID-12909 - Tom 800.315.9950
860HP: Model 3406 in rear with
SYSTEM. 430 GALLON FUEL TANK.
800.315.9950 x604
x604
425HP. Originally came out as a 3
238 GALLON HYDRAULIC OIL
2007 Fecon FTX440 w/Fecon BH 350
2007 Morbark 2355 Flail Chip
flail converted to a 2 flail debarker.
TANK. IQAN CONTROL SYSTEM.
Mulcher - Totally rebuilt in 2009 by
Harvester - Three knife, three flail
Handles up to 30" whole trees. Set
DUST SUPPRESSION SYSTEM. HYD
Fecon with all 2009 updates. 1670
machine. New long block engine
up for 2" chips. Recently came off
OPERATED DEBRIS CONTAINMENT
hours. Cat 440 HP Engine; Heavy
installed in September of 2011;
job. Well maintained and in good
DOOR. 16 FUNCTION RADIO
Duty Winch; Triple grouser high
About 5600 hrs on it now. Total
condition. - Item ID-12690 - Tom
REMOTE. SUPER PACKAGE!
flotation tracks; Excellent condition.
hrs on the unit are approx 11,000.
800.315.9950 x604
Optional new knife skin - $20,000
Priced to sell! - Item ID-12632 - Tom
Also, there is an extensive parts
2006 Morbark 6600 Horizontal
which is half price of new. - Item ID-
800.315.9950 x604
inventory and a knife grinding
Grinder - Approx. 6000 hours on
12692 - Tom 800.315.9950 x604
2007 Lamtrac 6125 Tracked
machine (with knives) that can be
this well maintained machine.
2007 Bandit Model 3680 Beast
Mulcher - Purpose built. 125hp
purchased separately with machine.
Has New Cat Dealer Rebuild
Grinder - Only 780 confirmed
Cummins engine. 2300 hours.
A well maintained machine that was
1000HP Engine at 5000 hours.
working hours; 700HP C-18 CAT
Purchased brand new in April 2012.
working well up to being shut down
works well Newer clutch -- with
42" X 66-5/8" HAMMERMILL;
outboard bearing, Had Cummins
VARIABLE SPEED INFEED SYSTEM;
KTTA 750 HP engine -- needs
HAMMERMILL DRIVE INCLUDES
repower - Item ID-12443 - Sam
ALL BELTS, SHEAVES, BUSHINGS
800.315.9950 x603 2005 Morbark Model 2755 Flail/
For Classifieds Call Your LBX REP at 1-800-315-9950
www.LBXonline.com
May 2014 n 37
May 2014
Bandit Offers
Stump Grinding Attachment for Skid Steers
B
powerful hydraulic motor requires no routine maintenance, and the steel grinding shaft is built to easily withstand regular grinding operation. And because the Stump Gun comes from Bandit, it’s built with the same durable construction and attention-to-detail people have come to expect from a Bandit product. To learn more about the Stump Gun, contact your local authorized Bandit dealer, or contact Bandit Industries directly at 1-800-952-0178.
Fecon Introduces
andit Industries now offers the Stump Gun, a powerful stump grinding attachment designed for use with skid steers. The Stump Gun’s innovative-yet-simple design allows it to easily grind stumps of virtually any shape or size. It attaches to skid-steer loaders in seconds, and it’s powered by the skid steer’s hydraulic system. “If you have a skid-steer loader, you can have a powerful stump grinder,” said Christopher Smith, Bandit’s marketing and communications director. “The Stump Gun is a perfect addition for anyone with a skid steer who’s also seeking a simple, easy-to-use stump grinding solution.” The Stump Gun connects to any skid steer with a quick attach plate. Once attached, the operator simply connects the hydraulic lines and removes the Stump Gun from its stand cradle. Because it operates vertically, the Stump Gun can be used to grind stumps of virtually any size. Operators simply drive to the stump, raise the Stump Gun into position, and grind the stump from left to right. The vertical design helps to aid chip containment while also being very effective on odd-shaped stumps and rootballs. “What’s nice about the Stump Gun is that it’s a very basic design with just a few moving parts, yet it’s effective on pretty much any kind of stump,” said Smith. “It’s high-production with low maintenance, and that’s something everyone can appreciate.” Maintaining the Stump Gun is as easy as operating it. Two grease points, nine grinding teeth and an end-cap on the shaft are the extent of the maintenance. Keep the Stump Gun greased and monitor the teeth and end-cap for wear—that’s it. The 38 n
Press Releases
Multi-Purpose EX60 Utility Track Vehicle
F
econ®, Inc. introduced the versatile EX60 Utility Track Vehicle at ConExpo-Con/Agg in Las Vegas. A 6,000-lb payload capacity and all-terrain rubber tracks makes the EX60 a versatile, heavy duty, compact UTV. Mobilize solutions such as fleet service, fire-fighting, material handling, or spraying vegetation and insects where trucks or larger vehicles can’t go. Two standard auxiliary hydraulic circuits can power optional equipment. A load sense pump is offered as an option for more demanding applications. The EX60 features a universal mounting plate in the payload area to easily switch between solutions, whether skid mounted equipment or material handling apparatus. A reversible operator station and operator controls add to the flexibility of the EX60. The 46HP diesel engine enables transport of the impressive payload and 7-MPH travel speed. If you would like more information about Fecon or the EX60 please call Courtney Shafer at 513-696-4430 or e-mail at cshafer@ fecon.com.
The Original Lumberman’s Exchange
Morbark Partners with Precision Sharpening Devices To Provide Bevel Buddy through Dealer Network
M
orbark, Inc., a leading manufacturer of durable, high-performance wood waste reduction equipment for more than 50 years, is proud to announce that it has signed a contract with Precision Sharpening Devices Inc. to sell the Bevel Buddy™ Chipper Knife Sharpener through its authorized dealer network. Since 1988 Precision Sharpening Devices, Inc., has been manufacturing counter grinding/back beveling equipment for knives used by a variety of industries, mostly for the pulp and paper, sawmill, plywood, and whole tree chipping markets. The Bevel Buddy handheld sharpener allows the knives to be re-sharpened without needing to be removed from the machine. The knives can be re-sharpened this way two to three times, reducing customer downtime. “The partnership between Morbark, Inc., and Precision Sharpening Devices, Inc., with their line of Bevel Buddy™ Chipper Knife Sharpeners will offer our customers a product that helps them operate their equipment at the highest levels of efficiency,” said Mark Mills, Precision Sharpening Devices, Inc. “The results are fuel savings, meeting production quotas, less down time, and greatly reducing their overall costs while maintaining a quality product and a safer work environment. Both parties view this as a ‘What’s best for the customer’ focus.” “We’re always looking for ways to make our customers more productive, more efficient and more successful,” said John Foote, Morbark VP of Sales and Marketing. “Partnering with Precision Sharpening Devices, Inc., to offer the Bevel Buddy through our worldwide network of authorized Morbark dealers gives our customers easy access to another tool to help them be more productive, and ultimately, more successful.”
Visit us online at www.LBXonline.com!
Forest Products Machinery & Equipment Exposition Coming...
June 10-12, 2015
Atlanta’s Georgia World Congress Center
Expo 2015 is your first-class marketplace to reach a quality audience of top management and purchasing executives from around the globe. Every two years, the wood products industry comes here to showcase state-of-the-art equipment, technology and services. Sign up today for prime exhibit space at the industry’s premier event.
Your Show Your Business Your Success
Complete show facts at SFPAexpo.com
Contact Eric Gee • egee@sfpa.org
SFPAexpo.com at end of job. - Item ID-13134 - Tom
hours. 90% track life remaining S/n
800.315.9950 x604
available. Great running condition.
2007 Peterson Model 4800E
Owner leaving business. - Item ID-
Portable Debarker - Good running
12908 - Tom 800.315.9950 x604
machine and very well maintained.
Morbark 1200 Tub Grinder -
9950 hours approximately. CAT
Powered by a 3412 Cat engine, 600-
3306 Engine. $40,000 in recent
hp. Tilt tub. Hours are unknown.
maintenance with records from
Please call Daren at Ext. 603 for
owner. Great unit for making
more details. - Item ID-12919 - Sam
clean chips. - Item ID-12941 - Tom
800.315.9950 x603
800.315.9950 x604
ROLLING STOCK
‘95 Barko 775B Feller Buncher Item ID: 13185 Contact: Sam Ph: 800-315-9950 x603
‘99 Tigercat 860D Delimber Item ID: 13189 Contact: Sam 800.315.9950 x603
2010 Fecon FTX440 w/ Fecon Model
2005 Kenworth T-800 with Rotobec
BH350 Mulching Head - Only 750
MT27 Loader - One Owner Truck,
hours; Cat 440HP engine; Heavy Duty
110,000 miles, 8LL Trans, 46,000 lb
feed, power up, power down. The
Winch; Triple grouser high flotation
rears, Full locking rears, Factory
mill is like new with under 220
pads at 95%. Like New! - Item ID-
double frame, 430hp engine - Item
hours. It cuts perfectly!! It has lots
12633 - Tom 800.315.9950 x604
ID-12612 - Sam 800.315.9950 x603
of extras, and 30 blades. - Item ID-
2005 Jackson 16 4D Shaving Mill
2011 Fecon FTX100 w/ a BH74ssv
SAWMILL
www.LBXonline.com
www.LBXonline.com ID-13266 - Sam 800.315.9950 x603
SHAVING EQUIPMENT
13253 - Sam 800.315.9950 x603
- Mill is powered by a 3-phase, 30
mulcher head - 233 Hours. Comfort
1984 Lane Model 8400 Saw Mill -
Cleereman model 40- 3 knee - Right
hp motor; Hydraulic powered by a
cab with Heat/AC. 100HP Cummins
Heavy duty four 14’ (4) head table
hand Includes track and controls.
3-phase 30 hp motor; The box was
engine. Total mulching package.
w/ a top saw. Silvatech Set works
Electric over air setworks. - Item ID-
upgraded for hydraulic in place of
Includes Fecon BH74 mulching
and has 45-50 foot of track frame.
13240 - Chris 800.315.9950 x600
chain driven; Comes with 6 sets
head with 6' cutting width. Priced
Surprisingly good condition! Great
Woodmizer LT40 Sawmill - 199
of knives This unit is in excellent
well below dealer cost. - Item ID-
Value at this price!! - Item ID-12689 -
hours on machine and motor. 25
condition! Comes with a Grizzly
12675 - Tom 800.315.9950 x604
Tom 800.315.9950 x604
hp Kolher gas engine. 500 dollars
knife sharpener, conveyor and
2012 Rayco Tracked Mulcher -
2007 Woodmizer LT 40 - Portable
worth of extra bands included!
forage box - Item ID-12796 - Chris
100hp Kubota Engine. Only 1450
sawmill non hydraulic. It has power
Sawmill is stored undercover - Item
800.315.9950 x600
For Classifieds Call Your LBX REP at 1-800-315-9950
May 2014 n 39
The Lumberman’s Exchange Post Office Box 1916 Columbia, Tennessee 38402
PRSRT STD. U.S. Postage PAID Permit No. 212 Pulaski, TN
Superior finished product control for biomass fuel, colored mulch, animal bedding, and other wood fiber commodities.
Electric or Diesel 150 - 875 Horsepower Portable, Stationary, or Track
Trust your wood fiber resources to the “Perfect In One Pass” TM advantage.
Rotochopper, Inc. | 217 West Street | St. Martin, MN 56376
-66 B k c lly Tra t Do w r e o N sp ran T with
40 n
The Original Lumberman’s Exchange
Visit us online at www.LBXonline.com!