May 2021 Lumbermens Magazine

COME VISIT US AT THE RICHMOND EXPO - BOOTH #105 MAY 2021 TM

pg.28 >>

Visit us at the Richmond Expo Booth J1 & J17

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

‘95 John Deere C6 Tree Farmer ‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 401

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

The Tree that Started it All!

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com

10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Grapple Assist

Since 1986, Lumbermens has published a monthlylogs circular for crooked reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

with 44 inch wheels, and all the bells and whistles, a production 2019 Cord KingitsLine-up

Escanaba, Michigan

machine, with air strain conveyers

that go up and down, with airbags,

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

includes two sets of Mcdonough Email: info@cordking.ca itpressure guides. Top Casting wheel

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

is supported on both sides. This

Web: www.cordking.ca MID-ATLANTIC

LOGGING & BIOMASS EXPO

is an extremely accurate machine

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

in ve1y good condition, Cuts 130

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

http://www.kfia.org/ KentuckyWoodExpo.aspx

S & W 125 Band Mill with

DESIGN DIRECTOR

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

feet a minute also has CLT presses.

TOLL FREE 1-888-219-WOOD (9663) Item ID 13876. Austin x703 Lexington, Kentucky

MARKETING DIRECTOR

Donna Heninger

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

on the mill, electronic computer Set

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

MAILING ADDRESS

Caterpillar generator - Low hours

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

• Wedge B & B Mfg. ...............................

18

and M&Fsplitter Gauge ............................. 28 design to suit your B. H. Payne .............................. 16 Meadows Mill, Inc. ................ 33 needs Menominee Saw ..................... 29 Baker ......................................

7 ton • 24 to5,72 splitting Bell's Machining .....................

27 Metal Detector's Inc. .............. 30 capability • The fastest splitting Brute Force Mfg. ..................... 31 Midwest Sharpening.............. 26 cycle time on the Buck Equipment (AIM) ........ 36 Morbark ..................................... 9 planet.

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

with onboard log turners, carriage drive, hyd pac for carriage, sawyers cab, computer controls, cabinet with electronic drives for carriage knees, husk including 48" bottom saw and 36" top saw

STACKING RAC

Facts to consider:

The Lumberman's Exchange is CW Mill-ArmorHog .............. 17 Rotochopper............................ 40 published

by Woods N. America’s first commercial firewood processor in the mid 70’s 1.monthly Pioneered CW Mill-Hogzilla ................... 15 Row Electric ............................ 20 Publishing, P.O. Box 1916, Columbia, TN 38402. All rights Products ........................

35 Sawmill Exchange .................. 11 Bar saw modelsDyna available M1820, M2030 and M2430 reserved.2.

All3 editorial/ advertorial submissions are used at the Empire Hydraulics ................... 8 Select Sawmill ......................... 19 discretion theSlasher publisher andSaw may Models Available Model 36, 40, 44, 44HO, 48, 54 & 60 3.of 7 be edited for purposes of clarity Great Lakes Mfg. .................... 34 Smith Sawmill ........................... 4 and space. Although all efforts have 4.

The Most productive machine on the3planet, and guaranteed The Paul proven Bunyan Show .........

39 Hahn Machinery ...................... been made to ensure accuracy of content submitted by advertisers Hurst Boiler .............................

14 Thomas Industrial Controls .....

10 and writers, the Lumberman's 5. Go to our web site for live action video and details www.cordking.ca Exchange, its principles and Iron Bull ................................... 21 Union Grove Saw & Knife.. 2, 37 associates, are not held liable for 6.

Available with single control22 Universal Refiner ................... 23 errors or omissions. Reproduction, Kilgorejoystick Saw ............................. in whole or part, is prohibited with­ www.BakerProducts.net .................................

24 WoodMizer ................................ l out written 7. consent.

Exclusive lifetimeLignomat splitter warranty and 1 year bumper to bumper warranty.

800.S48.6914 I S73.663.7711 ©2017 Woods Publishing

- USED FORESTRY EQUIPMENT FOR SALE

❘

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

❘

 (888) 401-MENS L!

NO. 3

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

‘95 John Deere C6 Tree Farmer ‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 401

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

❘

 LumbermensCO.com

** CALENDAR**

PleAse PrINt

FOR CLASSIFIEDS Call 888.401.MENS TM CHIPPERS See pictures, prices, and NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Location of all equipment at L I S T NewS York ELL EXCHANGE BUY SAVE Boonville, www.LumberMB\ISmagazine.com blades and 1 spare 36" blade),

Pulleys on Bearing . Parts Book and

belted rollcase to clear slabs and

12846. Sam x702

EST

1986

loader to drop logs onto carriage,

Precision 58 Chip Pac - Single chute

stop and loader to deal with big

Sam x702

loading system,. Item ID 12764.

heavy duty log turner under log

Trelan Chipper - This is a remote

logs onto carriage and track and

State

www.starwebhosting.net/woodsmen/ frame. Significant new spare parts

chipper that has been totally rebuilt with about 840 hours except for the

to be negotiated separately. Item ID

BANDMILLS & HEADSAWS DealS Month SOUTHWEST FOREST PRODUCTS EXPO Danckaert Band Resaw - Roughly Fri, 25 August Sat, 26 August From ApriL TA B L E O F C O N T E N T S

Email

of the

V-12 Caterpillar power unit. New

13198. Sam x702

clutches, disc, bearing, liners and

Manual Four Head Block - Manual

custom chute. 23” in opening and

Four Head Block Mounted on

The Tree that Started it All!

all steel carriage. Husk. Manual Hot Springs, Arkansas www.arkloggers.com

'12 WoodmIzer LT 40

City

❑ Please Change

where to order included. Item ID

cuts from sawline, log stop and

Zip

❑ Please Remove

short pop-up transfer to edger,

DEPARTMENTS

V-12 Cat with 750-800 hp rating.

10 hours on this machine since it

has been rebuilt, it has a 24foot in

EquipmEnt REpREsEntativEs EST 1986

feed deck 20 foot out feed deck cAll uS LAKES todAy foR All youR uSed 72ND ANNUAL GREAT equiPMent needS! with 44 inch wheels, and all the Since 1986, Lumbermens has LOGGING & HEAVY EQUIPMENT EXPO Free Equipment Listings ........................

6 published a monthly circular Thurs, 7 Sept Sat, 9 Sept bells and whistles, its a production fREE EquipmEnt listings!

Call –

reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan(888)

Individual Name

LIST

SELL

MID-ATLANTIC

ADVERTISING SALES *Company name and address required to process your change.

If you need to Change your Address or Add Your Name to our mailing list, then please complete this form and mail to:

(888) 401-6367 ext. 704 morris@lumbermens.co

AdMARKETING Directory .......................................... 46 DIRECTOR Reduced PRice item id: 14021 contact: Sam x702

Lumbermens Magazine

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

FAbTeK 344b

P.O. Box 1916 Columbia, TN 38402

Donna Heninger

✁

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

(888) 401-6367 Ext. 700

Ext. 704

is an extremely accurate machine

morris@lumbermensco.com

inchris@lumbermensco.com ve1y good condition, Cuts 130

KENTUCKY WOOD EXPO chris Woods Fri, 15 Sept - (888) Sat, 16401-6367 Sept Phone:

Morris Woods, Ad Sales Phone: (888) 401-6367 ext. 704 morris@lumbermens.co

feet a minute also has CLT presses.

ext. 700 chris@lumbermens.co

Lexington, Kentucky http://www.kfia.org/ Sam Wall KentuckyWoodExpo.aspx (888) 401-6367

item id: 14061 contact: J Williams x701

For classifieds Call toDay (888) 401-6367

Item ID 13876. Austin x703

SAustin & W 125 Woods Band Mill with

Caterpillar generator - Low hours (888) 401-6367

on the mill, electronic computer Set

Ext. 703

works,1 1/2" or 2" band, 22ft. track

❘

austin@lumbermensco.com

Cambridge, Ohio www.ohioforest.org

Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

Austin Woods Phone: (888) 401-6367 ext. 703 austin@lumbermens.co

** INFO LINK**

 Since 1986

Sam Wall Phone: (888) 401-6367 ext. 702 sam@lumbermens.co

Joe CARRIAGES Ferrazzano&

Walker Woods ❘

Ext. 707

DRIVES

2010 Cardinal HD Carriage (888) 401-6367

(888) 401-6367

 liSt  Sell  exchange  buY  Save

SAVE

is supported on both sides. This

sam@lumbermensco.com

EQUIPMENT REPS

BUY

pressure guides. Top Casting wheel

THE PAUL BUNYAN SHOW Ext. 702 Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co Issue 364 lumbermenS

expo.com/

LOGGING & BIOMASS EXPO

EXCHANGE

itChris includes two sets of Mcdonough Woods

Selma, North Carolina 2012 JoHn deere (888) 401-6367 548G3 www.midatlantic-logging-biomass­

Phone

Woods Publishing

SELL

that go up and down, with airbags,

MID-ATLANTIC & BIOMASS B U Y LOGGING SAVE Morris Woods Fri, 15 Sept Sat, 16 Sept EST 1986 AD Sales EXCHANGE

item id: 14061 contact: Austin x703

DealsMorris of the Month ................................ 28 Woods



LIST

the PUBLISHER News .......................................26-27 Address

In

Company Name*

❑ Please add

Safety Alert ............................................ 25

machine, with air strain conveyers 401-6367

Carriages (Sawmill) - Cardinal

 lumbermenSmagazine.com

Ext. 709

Carriage line it includes carriage

B & B Mfg. ............................... 18

M&Fwalker@lumbermensco.com Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's IncCJ . .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Buck Equipment (AIM) ........ 36 Send address changes to: SUBSCRIPTION: a trade newspaper for the logging, Lumberman'sLumbermens™, Exchange Corley Mfg .............................. sawmilling, pallet and secondary wood manufacturing32 P.O. Boxmanufacturing, 1916 industry, is free within the United States to qualifying manufacturers Columbia, TN 38402 CRD Metalworks ....................

25 and industry suppliers. Please limit your subscription to one free copy per or mill location.

The company Lumberman's Exchange is CW Mill-ArmorHog .............. 17 published monthly

by Woods Send address changes to Lumbermens™ CHANGE OF ADDRESS: CW Mill-Hogzilla ................... 15 Publishing, P.O. BoxW. 1916, Magazine, 1116 7th St., Ste. 297, Columbia, TN 38401. When Columbia, TN 38402. All rights possible, please include an old address label.

Dyna Products ........................ 35 reserved. All editorial/ advertorial

REPRODUCTION Adverti sers are ................... responsible 8 submissions are usedAND at theRESPONSIBILITY: Empire Hydraulics discretion of the publisher and of may for the contents and claims their advertising. Lumbermens™ accepts be edited for purposes clarity GreatofLakes Mfg. .................... no responsibility for of their claims. No part this publicati on may be34 and space. Although all efforts reproduced or transmitt ed have in any form or by any means, electronic Hahn Machinery been made to ensure accuracy of or mechanical, including photocopying, recording or any...................... information 3 content submitted advertiserswithout permission of Lumbermens™. storage retrievalby system, Hurst Boiler .............................

14 and writers, the Lumberman's Negatives, artwork, and other items submitted for publication in Exchange, its principles and IronserQs. Bull ...................................

Lumbermens™ are the property of adverti Lumbermens ™ owns21 associates, are not held liable for material typeset and/or designed by Lumbermens ™ and reserves the errors or omissions. Reproduction, Kilgore Saw ............................. 22 right to its use is outside of Lumbermens™.

Lumbermens™ will exercise in whole or part, prohibited with­ every precauti on in writing, designing, Lignomat and printing material contained24 ................................. out written consent. within. We©2017 shall not be Publishing liable for omissions or typographical errors.

Woods - USED FORESTRY EQUIPMENT FOR SALE

❘

joe@lumbermensco.com

with onboard log turners, carriage drive, hyd pac for carriage,

carriage knees, husk including Midwest Sharpening ..............

26 (888) 401-6367 48" bottom saw and 36" top saw Morbark .....................................

Ext. 7019

STACKING The Tree that RAC Started it All!

Multitek ...................................

12 cj@lumbermensco.com Piper's Saw Shop.................... 13

Rotochopper............................ 40

Row Electric ............................ 20 Sawmill Exchange .................. 11

Since 1986, .........................

Lumbermens™ Select Sawmill 19 has pub lished a month ly circular reaching sawmills, loggers, pallet makers, recyclers and industrial Smith Sawmill 4 wood working........................... plants worldwide.

The Paul Bunyan Show ......... 39 PUBLISHER

AD SUBMISSIONS May be sent to— morris@lumbermensco.com

Woods Publishing

Thomas Industrial Controls..... 10 DESIGN DIRECTOR Union Grove Saw & Knife.. 2, 37 Ted Monnin

POSTMASTER Send address changes to: Lumbermens™ Magazine www.BakerProducts.net 1116 W. 7th St., Ste. 297 • Columbia, TN 38401

Universal Refiner ................... 23

MAILING ADDRESS WoodMizer l 1116 W. 7th St., ................................

Ste. 297 • Columbia, TN 38401 (888) 401-6367

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

800.S48.6914 I S73.663.7711

❘

 (888) 401-MENS L!

NO. 5

“Precision Under Pressure” “Precision Under Pressure”

Phone 315.284.4126 Fax Phone 315.849.2045 315.284.4126 Website Fax www.empirehyd.com 315.849.2045 Email Website info@empirehyd.com www.empirehyd.com Email info@empirehyd.com

TM

‘93 Barko 180B

FREE EQUIPMENT BANDMILLS & HEADSAWS BANDMILLS & HEADSAWS

DANCKAERT BAND RESAW DANCKAERT BAND RESAW Roughly Roughly1010 hours hours onon this this machine machinesince since it it has has been been rebuilt, it has a 24 footininfeed feed rebuilt, it has a 24 foot deck foot out feed deck with deck 2020 foot out feed deck with inch wheels, and thebells bells 4444 inch wheels, and allall the whistles,itsitsa aproducti production andandwhistles, on machine, with machine, withair strain air conveyers strain that go that up go and down, with conveyers up and down, airbags, it includes two sets with airbags, it includes twoof Mcdonough pressure guides.

Top sets of Mcdonough pressure CastingTop wheel isngsupported guides.

Casti wheel ison both sides. an extremely supported on This bothissides.

This is accurate machine in very good an extremely accurate machine

‘16 Halverson H140 Item ID: 14077 ‘93 Barko 180B Contact: Austin Skidsteer (DEMO) ‘16 Halverson H140 Item ID: 14077 Ph: (888) 401-6367 x703 Item ID: JW-909632(888) Contact: LISTINGS, CALL 401-MENS Austin Skidsteer (DEMO) Contact: J Williams

condition, Cuts 130 feet a minute CARRIAGES & DRIVES also 2010 has CLT presses. HD CARDINAL Item ID 13876.

Austin x703 CARRIAGE CARRIAGES

CARRIAGES & DRIVES Cardinal Carriage line it includes 2010 carriage withCARDINAL onboard logHD turners, CARRIAGE carriage drive, CARRIAGES hyd pac for Cardinalsawyers Carriagecab, line itcomputer includes carriage, carriage with onboard log controls, cabinet with electronic turners, drive, husk hyd drives for carriage carriage knees, pac for 48” carriage, 36” including bottomsawyers saw and cab, computer controls, cabinet with top saw, short pop-up transfer electronic drives for carriage to edger, belted rollcase to clear knees, husk including 48” slabs and cuts from sawline, bottom saw and 36” top saw, log stop and loader to drop short pop-up transfer to edger, logs onto carriage, heavy duty 13428 Victory Ln. // PO Box 124 in very13428 good conditi Cuts log turner under log stop and Adams Center, NY 13606 Victory Ln.on, // PO Box 124 130 feet a Adams minuteCenter, also has CLT NY 13606 loader to deal with big logs onto presses. carriage and track and frame.

Item ID 13876. Austin x703 Item ID 13198. Sam x702

Ph: (888) 401-6367 x703 and includes theKILNS sawmill, and DRY cab. An incline conveyers, a MEC 12 X 38 transfer table and two sets TRIPLE PASS DRUM DRYER ofComes roller tables.

This mill saws with trunnions, drum a million board feet or more drive, fan and cyclone. of walnut every year. Max log Item ID 13925. Austin x703 diameter 36in, Max Width of cut 25in, The width of the ‘95 John MECDeere 12 X 42 C6 band is 1 1/2 Inches. Video of TRIPLE PASS DRUM C6 DRYER John Deere it‘95 operating is available, and Tree Farmer 12 x 42 Mec triple pass Drum can be sent upon request.

Item comes ID: 13920 Tree Farmer Dryer, with trunnions.

Item ID 13892.

Austin x703 Contact: Austin Item 13920 ItemID: IDDRY 13924.

KILNSAustin x703 Ph: (888) 401-6367 x703 Contact: AustinCHIPPERS DYNAMIC MEC 12 X 38 Ph: (888) 401-6367 x703 2004 JCB 441DRUM WHEEL LOADER TRIPLE PASS DRYER 3,509 hours on this Comes with trunnions, machine, drum capacity!.

Item ID as 13421.

Sam x702 everything works it should.

I have drive, fan and cyclone. capacity!.

Item ID 13421.

Sam x702 BARKO many videos available of it running, Item ID 13925.

Austin x703 BARKO and can be 160B sent upon request.

1994 Barko - Electric Item ID 13888.

Austi n x703 MEC 12 X 42 1994 Barko 160B Electric knuckleboom, 30' boom, 75hp TRIPLE PASS DRUM DRYER 30'continuous boom, 75hp off onto a conveyor. a very well built processor.This ItemisID 13820. knuckleboom, motor, Rotobec 12 x 42 Mec triple pass Drum Rotobec continuous well Sam built x702 processor. Item ID 13820. motor, grapple, 5,000 original hours.

Come visit us at the Dryer, comes with trunnions. grapple, 5,000 original hours.

Sam x702 Firewood Processor - This is (excellent condition.).

Itemx703 ID Richmond Expo Item ID 13924.

Austin Item ID: JW-909632 belted rollcase to clear Ph: (888) 401-6367 x701slabs CHIPPERS Contact: J Williams andPRECISION cuts from sawline, log stop 58 CHIP Ph: (888) 401-6367 x701PAC and loader to drop logs onto Single chute loading system. carriage, heavy duty log turner Item ID 12764. Sam x702 under log stop and loader to COMPLETE SAWMILLS deal with big logs onto carriage 2006 LT300 and trackWOODMIZER and frame.

This mill currently running, Item ID is 13198.

Sam x702 and includes the sawmill, and CHIPPERS cab. An incline conveyers, a PRECISION 58 CHIP PAC transfer table and two sets of Single chute loading system. roller tables.

ThisSam millx702 saws a Item ID 12764.

‘13 KMC 2500orTrack million board feet more of COMPLETE SAWMILLS ‘13 KMC 2500 Skidder walnut every year. Track Max log 2006 WOODMIZER LT300 diameter 36in, Max Width Skidder Itemmill ID:is14078 This currently running, of cut 25in, The width of the Contact: Austin Item ID: 14078 band is 1 1/2 Inches.x703 Video of Ph: (888) Austin 401-6367 Contact: itPh: operati ng is available, and can (888) 401-6367 x703 be sent upon request.

13892. Austi n ax703 offItem ontoID a conveyor.

This is very

If you recognize this…

‘05 Gehl CTL 70 ‘05 Gehl CTL 70 Item ID: JW-986495

‘83 John Deere ‘83 John Deere 4850 4850 Item ID: 14073

Item ID:Austin 14073 Contact: Contact: Austin x703 Ph: (888) 401-6367 Ph: (888) 401-6367 x703

Item ID: JW-986495 Contact: J Williams Contact: J Williams x701 Ph: (888) 401-6367 Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID 20,000lb goose neck trailer. Item ID 13916. Austin x703 13916. Austin x703 Best Value Portable Log Splitter Best Value Portable Log Splitter - Small manufacturer in PA has - Small manufacturer in PA has made the best valued log splitter. made the best valued log splitter.

Handles logs up to 32”. Uses Handles logs up to 32”. Uses 13HP Honda motor. Manual start 13HP Honda motor. Manual start but electronic option is available. but electronic option is available.

Has Log Lift. Uses 4-way wedge Has Log Lift. Uses 4-way wedge adjustable adjustableto to single single two two way. way. Great Great

with 1700 hours, in very good with 1700 hours, in very good condition. Easily produces high condition. Easily produces high quality chips with patented ‘Cone’ quality chips with patented ‘Cone’ drum design. Can easily load 42’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703 day. Item ID 13882. Austin x703

you need one of these.

Brewco Saws Brewco Saws- Two - TwoBrewco BrewcoSaws Saws inin excellent condition. excellent condition.Runs Runsgreat. great.

Value! x702 Value!PA. PA.Item Item ID ID 12062.

12062. Sam Sam x702 Firewood Processor This is a Firewood Processor - This is a

Firewood Processor - This a Chomper Model 16 PDAis aautomatice Chomper Model 16 PDA firewood processor

automatice firewood processor with John Deere power unit with with John Deere power unit with low hours. Control panel includes low hours. Control panel includes tach, oil pressure, water temp and tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. amp gauges. Cuts logs up to 16”.

One owner and comes with all One owner and comes with all manuals and receipts. Purchased manuals and receipts. Purchased new for $32,500. Item ID 13865. new for $32,500. Item ID 13865.

Sam x702 Sam x702

LOGGING EQUIPMENT LOGGING EQUIPMENT BANDIT BANDIT

1999 Bandit 1900 Tracked Disc 1999 Bandit 1900 Tracked Disc 1500 Model Chipper - Cat Under Carriage at Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner.

Diesel. 7500 Hours. One owner.

Well maintained. maintained.Item ItemID ID13294.

13294.

Well

Don’t just fix it again, get the permanent solution!

EDGERS EDGERS&&GANGS GANGS

Item IDID13644.

Item 13644.Sam Samx702 x702

FIREWOOD FIREWOODPROCESSORS PROCESSORS

2010 Shop 2010 ShopBuilt BuiltWood WoodProcessor Processor - It- It has a 353 Detroit diesel, has a 353 Detroit diesel,40 40

homemade homemadeprocessor processor with with aa 10’ 10’ log logdeck. deck.Has Has aa hydraulic hydraulic grapple, grapple, chain chainand andkicker kicker that that all all runs runs off off of a 4 cylinder Mercedes power of a 4 cylinder Mercedes power

www.prolenc.com

Call 877.563.8899 250.563.8899 inch insert Has unit.

Hasaa4’ 4’ chain chain saw saw that that kicks kicks inch inserttooth toothcircle circlesaw, saw,30 30foot foot orunit. Issue 401 Issue364 364 Lumbermens™™  since since1986 1986 384 Lumbermens

❘❘

Sam x702 x702 Sam 2004 BanditBeast BeastModel Model4680 4680- 2004 Bandit 3412 Caterpillar CaterpillarDiesel Dieselengine engine 3412 with 850 850 HP. HP.5300 5300hrs. hrs.Mill Millinin with

good condition. condition.Just Justfinished finished10 10 good Acre clearing job, ready to work!

Acre clearing job, ready to work!

Remote control. control.Big Bigproduction production Remote

  exchange exchange   buy buy  save save  List  seLL 

(excellent condition.).

Item ID#1369 DYNAMIC CHIPPERS Booth 13238.

Chris x700 13238.

Chris x700 2004Barko JCB 441 1995 775WHEEL B FellerLOADER Buncher

3,509 hours thisBuncher machine, 1995 Barko 775 BonFeller - Pumps recently redone.

400 hrs everything works as it should.

I have - Pumps recently redone. 400 hrs on injection pump. always started many videos available of it running, on injection pump. always started good. order. 22in and canin begood sent working upon request. good. in good working order. 22in Item ID 13888. kohing head. headAustin works x703 great. kohing head. head works great.

Item ID 13185. Sam x702 Item ID 13185. Sam x702 1999 Barko 160D - new engine with 1999 Barko 160D - new engine with approximately 1500 hours. Hour approximately 1500 hours. Hour meter dont work. The last 2 owners meter dont work. The last 2 owners have only used it to load trucks or have only used it to load trucks or as a backup as needed. Has a CTR as a backup as needed. Has a CTR delimber, grapple has been rebuilt. delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702 Item ID 13694. Sam x702 94 Barko 275 - Excellent value 94 Barko 275 - Excellent value withlow lowatathours hours 3,500. with atat 3,500.

5.95.9 CUMMINScontinuous continuous grapple.

CUMMINS grapple.

Runs Great!.

Item ID 13740.

Sam Runs Great!. Item ID 13740. Sam x702 x702

BELL BELL

1990Bell BellSuper Super - This Bell has 1990 TT - This Bell has a brand new Duetz engine.

Lever a brand new Duetz engine. Lever

control,33” 33”bar, bar, pump and tranny control, pump and tranny ❘ ❘

LumbermensCO.com LumbermensCO.com

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

** INFO LINK**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses.

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 7

Phone 315.284.4126 splitter, on 20,000lb goose neck 2008 DYNAMIC 585 CHIPPER Fax 315.849.2045 trailer.

This is a 2008 dynamic cone Website Item ID 13916. Austin x703 head chipper with 1700 www.empirehyd.com hours, in very good condition. Email “Precision Under Pressure” info@empirehyd.com

Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day.

Item ID 13882. Austin x703 FIREWOOD PROCESSORS

2010 SHOP BUILT WOOD PROCESSOR It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot chain conveyer, 8 way

140

FIREWOOD PROCESSOR This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks off onto a conveyor.

This is a very well built processor.

Item ID 13820. Sam x702

PIPER’S Saw Shop

FIREWOOD PROCESSOR This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs ‘16 Halverson H140 up to 16”.

One owner and comes with all manuals and receipts.

Skidsteer (DEMO) Purchased new for $32,500.

Item ID: JW-909632 Item ID J13865.

Sam x702 Contact: Williams LOGGING EQUIPMENT Ph: (888) 401-6367 x701 BANDIT

2004 BANDIT BEAST MODEL 4680 3412 Caterpillar Diesel

‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

5 7 0 6 • 5 4 8 • 800

Simonds Red Streak Hard Back ‘057/8” Gehl CTL 70 1-1/4” x .042 x 3/4” or L im it e d Length 13’2” Item ID: JW-986495 Contact: J Williams T im e Ph: (888) 401-6367 x701

$14.71 $14.27 each

‘83 John Deere 4850 Tell us you saw it here!

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’

used

or a

702

000

It

702

er

ly

ower

ew

still

drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot

O n ly

chain conveyer, 8 way splitter, on

BELL

1990 BELL SUPER T This Bell has a brand new Duetz engine.

Lever Deere control, 33” ‘95 John C6bar, pump and tranny has been Tree Farmer rebuilt not long ago. Hour meter 13920 isItem inop. ID: New paint. Runs perfect.

Contact: Austin Has heat and air, it just needs to Ph: (888) 401-6367 x703 be fixed.

Item ID 13896. Sam x702 1993 BELL SUPER T x702 capacity!.

Item ID 13421.

Sam

off onto a conveyor. This is a very Sam x702

grapple, 5,000TREE original hours.

BELL CUTTER

Firewood Processor - This is a Chomper Model 16 PDA

motor, Rotobec continuous

Around condition.).

1000 hours on the (excellent Item ID

machine.

13238.

ChrisNew x700air cooled motor

amp gauges. Cuts logs up to 16”.

only about 300 hours. Rebuilt dangling head. Several bars -and Pumps recently redone. 400 hrs off chains.

Machine came on always theinjection job in pump.

February andstarted is field ready.in good working order. 22in good.

Item head.

ID 13943.

Austigreat. n x703 kohing head works

manuals and receipts. Purchased

1999 Barko 160D - new engine with

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and One owner and comes with all

1995 Barko 775 B Feller Buncher

CASE Item ID 13185. Sam x702

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

2006 CASE 440 SKID LOADER With only 871 hours, this approximately 1500 hours. Hour machine starts, runs, and meter dontlike work.

The Ilast 2 owners operates new. have many have only used it to load trucks or videos available and can be sent upon request. as a backup as needed. Has a CTR Item IDgrapple 13886.has Austi x703 delimber, beenn rebuilt.

but electronic option is available.

50% or better. 475 hp Cummins

Item ID 13694.

Sam x702 LONG TRACK DOZER

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT BANDIT

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

22X380, direct drive, EROPS,

Boom cylinders have minor leaks.

99’ CASE 850G

Well maintained. Item ID 13294.

94 Barko 275 - Excellent value only One owner machine, 3300 original hours, with low at hours at 3,500. 5.9 has

2004 Bandit Beast Model 4680 -

Runs Great!. Item ID 13740. Sam

Sam x702

3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

good condition.

Justus finished Visit at the10

Acre clearingRichmond job, ready toExpo work! #G1 Remote control.Booth Big production

 with Issuewinch.

364 Lumbermens 1986 401 Low  List  exchange buygoto save arch hours on ™  since Cat D5B Dozer -❘ Cat D5B s/n  seLL come hook up to it and your

this skidder at only 3700. These

boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours. (excellent condition).

Item ID 13238. Chris x700

Good running condition. 33” BARKO Bar Saw. Tires at 50%. Deutz 1994 Barko 160B - Electric engine. Hour meter broken. knuckleboom, 30' boom, 75hp Item ID 13543. Sam x702

well built processor. Item ID 13820.

Promotional Pricing Offer

engine with 850 HP. 5300 hrs. Mill in good condition.

Just finished 10 Acre clearing job, ready to work! Remote control.

Big production capacity!

‘93 Barko 180B Item ID 13421.

Sam x702 Item ID: 14077 BARKO Contact: 1994Austin BARKO 160B Ph: (888) x703 30’ Electric 401-6367 knuckleboom,

job site and put it to work to up

never been usedgrapple. in the CUMMINS continuous

woods, it has a ripper on the back, original pads, and x702 chains, Under carriage is BELL new rollers new along with on Bell theSuper bottom, andhasnew 1990 T - This Bell asprockets. brand new Duetz engine. Lever Item ID 13909. Austin x703 control, 33” bar, pump and tranny ❘

 LumbermensCO.com

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses.

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

**

CARRIAGES & DRIVES

LINK** CarriagesSawmill (Sawmill) - Cardinal Field Proven Design forINFO the Independent Hardwood MAILING ADDRESS

2010 Cardinal HD Carriage

Carriage line it includes carriage

B & BEdger Mfg. ...............................

18 M&F Gauge ............................. 28 - Two proven P.O. Box 1916 • Columbia, Corley lnfeed and with Lewis Optimization with onboard log turners, carriage TN 38402-1916 B. H. Payne .............................. 16 Meadows Mill, Inc. ................ 33 drive, hyd pac for carriage, (888) 401-6367 names with proven results Menominee Saw .....................

29 Baker ......................................

5, 7 sawyers cab,Visit computer us atcontrols, the AD SUBMISSIONS Richmond Expofor May be sent to­ cabinet with electronic drives • morris@lumbermens.co True Hardwood Bell's Optimization Machining ..................... 27 Metal Detector's Inc. .............. 30 Booth #428 & 527 carriage knees, husk including Brute Force Mfg. ..................... 31 Midwest Sharpening.............. 26 • Small footprint that fits inside most existing mills POSTMASTER 48" bottom saw and 36" top saw Buck Equipment (AIM) ........ 36 Morbark ..................................... 9 Send address changes to: Exchange with all of the optimization capability of more • Lumberman's Value priced Corley Mfg .............................. 32 Multitek ................................... 12 P.O. Box 1916 Columbia, TN 38402 CRD Metalworks ....................

25 Piper's Saw Shop.................... 13 elaborate high speed Edger Optimizers

STACKING For more information on our new "M" Series RAC Edger and

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

other Corley and Lewis products, give us a call.

LEWIS CONTROLS CORLEY SAWMILL OPTIMIZATION MACHINERY Chattanooga, Tennessee Iron Bull ................................... 21

Kilgore Saw ............................. 22 Phone 423-698-0284 Lignomat ................................. 24

www.corleymfg.com

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

Cornelius, Oregon

Union Grove Saw & Knife.. 2, 37

Phone 503-648-9119

Universal Refiner ................... 23 WoodMizer ................................ l

 SELL YOUR EQUIPMENT TODAY TODAY l§

www.BakerProducts.net

www.lewiscontrols.com 800.S48.6914 I S73.663.7711

❘

 24/7 SUPPORT 0 SUPPORT

❘ L!  (888) 401-MENS 401-MENS

NO. 9

Phone 315.284.4126 Fax bucket for street ditch clean up.

CATERPILLAR 315.849.2045 Item ID 13441. Sam x702 Website 1994 CATERPILLAR 320 www.empirehyd.com Dry machine that is in good Email 1998 CATERPILLAR 515 “Precision conditi on forUnder the Pressure” year. The sti ck info@empirehyd.com

and bucket cylinder have been repacked. It has a thumb and bucket on it, also has a 230 Waratah processing head that can be sold with it. Hours are around 19k, motor has been replaced a couple years back.

Machine is working daily.

Item ID 13936. Austin x703

1994 CATERPILLAR D4 HI TRACK WITH GRAPPLE This is an extremely low hour dozer/skidder with only 2800 actual hours. Comes with new 30” pads and chain.

Undercarriage is still in excellent shape. Fixed grapple and no winch.

Item ID 13932. Sam x702

Grapple with winch, no heat or air. Open cab skidder with 9800 hours. Tires are 28L’s, rear 90% and fronts are 30% with new bear paws chains.

Item ID 13801. Sam x702

2005 CATERPILLAR 525B This is a dual arch skidder with winch. Very low hour skidder with 7900 frame hours and only 63 hours on a new engine. Continuous grapple, tires are 30.5’s @ 70%. This is a really nice skidder for the price.

Item ID 13816. Sam x702

2007 CATERPILLAR D6N LGP DOZER ENCLOSED CAB Overall: Cab Heat & AC, 150HP Cat C6.6L, 90% Undercarriage, 1996 CAT 214 MOBILE 13428 Victory Ln. // PO Box 124 GPS Ready, Sweeps & Rear EXCAVATOR Adams Center, NY 13606 Screen, 13’6” PAT Blade, 39,500 with 36’ magnet 3 tons steel shear. low hrs! All hard tires, LBS, Hours: 7,867 Horsepower: 4 outriggers ideal for scrap 150 S/N: ALY03028.

Item ID 13567. Chris x700 business. It also has 48’ swavel

2000 CAT 515 GRAPPLE SKIDDER One Owner Runs great! Is it an excellent condition. Rubber is around 75% Has new Hydraulic pump and Charge pump.

Item ID 13616. Sam x702

‘16 Halverson CLARK H140 Skidsteer (DEMO) CLARK RANGER 665D

Tight dry machine, Item ID:and JW-909632 rebuilt hour meter Contact:motor.

J Williams Ph: (888)It 401-6367 x701 broken, has a 353 Detroit, with grapple, and winch, always fires right up, and runs with no issues.

Item ID 13748. Austin x703 EARLY 70’S CLARK 664 CABLE SKIDDER some center slack, needs front tires, comes with a spare tire.

Gearmatic 19 winch doesn’t hold Detroit power ‘13 good.

KMC453 2500 Track unit.

Skidder Item ID 13629. Sam x702 Item ID: 14078 JEM Contact: Austin EXPORT LOG Ph: (888) 401-6367 x703 DEBARKING LINE Reconditioned 35 Nicholson A-5 debarker, cab, infeed hour off onto a conveyor. This is a very glass rolls, log dischage belt well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is

‘05 Gehl CTL 70 Visit us at the Richmond Expo

#602 & 701 ‘83 JohnBooth Deere 4850

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

vans and produce 6 - 8 loads per

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 401

adjustable to single two way. Great

Well maintained. Item ID 13294.

Lumbermens™  since 1986

❘

(excellent condition.). Item ID

good. in good working order. 22in

50% or better. 475 hp Cummins

Firewood Processor - This is a Rotary Dryers homemade processor with a 10’ Sand Dryers log deck.

Has a hydraulic grapple, Grain Dryers Lumber Kilns chain and kicker that all runs off Cement Kilns of a 4 cylinder Mercedes power Brick Kilns unit. Has a 4’ chain saw that kicks

grapple, 5,000 original hours.

tach, oil pressure, water temp and

low hours. Control panel includes

but electronic option is available.

Value! PA. Item ID 12062. Sam x702

motor, Rotobec continuous

- Pumps recently redone. 400 hrs

Has Log Lift. Uses 4-way wedge

quality chips with patented ‘Cone’

knuckleboom, 30' boom, 75hp

with John Deere power unit with

day. Item ID 13882. Austin x703

condition. Easily produces high

1995 JOHN DEERE C6 TREE FARMER Only 20 hours on a new 5.9 Cummins engine. The whole center has been fixed, and line bolt redone, transmission is ti‘95 ght, John center pins are good.

Deere C6 It has a full speed tranny, with two Tree with Farmer reverse, a winch. Working Item ID: 13920 daily.

Contact: AustinAustin x703 Item ID 13920.

Ph: (888) 401-6367 x703 2004 648GIII JOHN DEERE DUEL ARCH SKIDDER Slick Machine.

Runs capacity!.

Item ID 13421.

Sam good x702 motor is inBARKO top notch condition.

1994 Barko 160B - Electric Item ID 13610. Sam x702

automatice firewood processor 1995 Barko 775 B Feller Buncher Clean-Burn Design

drum design. Can easily load 42’

with 1700 hours, in very good

‘92 JOHN DEERE 590 D CUTTER Will pads180B in the future, ‘93 need Barko sprockets and rails are about Item ID: 14077 85%, it has a 4cyl JD motor.

Contact: Austin It has a Rotnee dangle hd. w/ Ph: (888) 401-6367 x703 a bar saw and a spare idler.

Item ID 13612. Chris x700

Innovative13238. Chris x700

a Chomper Model 16 PDA

amp gauges. Cuts logs up to 16”.

Manufacturing a full line of biomass fired One chain conveyer, 8 way splitter, on combustion systems backed with fifty years of owner and comes with all 20,000lb goose neck trailer.

Item ID manuals and receipts. Purchased innovative clean-burn design. Diverse in every way with multi-fuel blending capability.

Hurst 13916. Austin x703 new for $32,500. Item ID 13865. stokers utilize hundreds of common and Sam x702 Best Value Portable Log Splitter abundant solid biomass fuels.

- Small manufacturer in PA has Large or small scale, project LOGGING EQUIPMENT management is eased with the made the best valued log splitter.

BANDIT impressively short installation time Handles logs up to 32”. Uses 1999 Bandit 1900 Tracked Disc required with prefabricated 13HP Honda motor. Manual start Chipper - Cat Under Carriage at modular components.

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703

with side log kickers. Call 208451-0365 for details. $279,000 JOHN DEERE

Diesel. 7500 Hours. One owner.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

on injection pump. always started kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

50

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, YEARS pump and tranny

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

❘

 LumbermensCO.com

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

** INFO LINK**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses.

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 11

Phone 315.284.4126 Fax 2012 JOHN DEERE 548GIII 2004 JOHN DEERE 648GIII 315.849.2045 This machine has 13000 total Single arch with winch, blade Website hours on the body, with www.empirehyd.com only extensions, 1 new 28L and 3 @ 3000 hoursUnder on Pressure” the new mo- Email 50%. This is still a new machine “Precision info@empirehyd.com

tor, comes with a set of chains, working daily.

Item ID 13878. Austin x703

2006 JOHN DEERE 700J DOZER This work horse comes with a winch, and new undercarriage, it is tight and dry & running daily with 4500 hours.

Item ID 13883. Austin x703 2006 JOHN DEERE 748GIII 8700 hours, running daily.

Item ID 13881. Austin x703

with only 3600 hours.

Item ID 13780. Sam x702

2009 JOHN DEERE 648H This is a one owner machine, every switch works, interior is very clean, radio, heat/ac.

Air ride works as it should.

Tires are 30.5x32. Extremely clean machine with no leaks.

Cutting edge on blade is excellent, with no cracks or welds anywhere.

Item ID 13747. Austin x703 FRANKLIN

2006 JOHN DEERE 1995 FRANKLIN 170 FIREWOOD PROCESSOR Enclosed cab, single arch with a This is a Chomper super 14, winch, new paint, 4 brand new with a 60hp engine. In very nice 23.126 firestone tires, around shape. Only 171 hours, comes 15000 hours. with green chain conveyer. All Item ID 13910. Austin x703 of the manuals for the engine, 13428 Victory Ln. // PO Box 124 and the chopper itself come 2003 FRANKLIN Q80 Adams with it, as wellCenter, as allNY of 13606 the GRAPPLE SKIDDER electrical schematics.

7500 hours, but just 5000 hours Item ID 13894. Austin x703 on reman engine. New Radiator;

New Hydraulic Pump; Comfort cab with good working heat and air; Tires at 80%.

Item ID 12450. Sam x702 GRINDMASTER SUDDRETH HORIZONTAL GRINDER H140 ‘16 Halverson This is a 60 HP low rpm Skidsteergrinder, (DEMO) Horizontal comes Item ID: JW-909632 with a blower, and the blower Contact: to J Williams connects the grinder with (888) 401-6367 x701 aPh: pipe.

It has top and bottom infeed rolls. Overall lightly used, in really good shape. Width capacity is around 30” maybe even wider.

Item ID 13889. Austin x703 HYDRO-AX 1998 HYDRO AX 611EX SAW HEAD FELLER BUNCHER with about 8800 hours.

Bunching Saw Head has large ‘13 KMC 2500 Track pocket for accumulation Skidder and lifting side shield for notching larger trees before Item ID: 14078 felling.

Cummins Contact: Austin engine. 28L tires at 60%.

Decent running Ph: (888) 401-6367 x703 condition.

Item ID 13245. Sam x702 off onto a conveyor. This is a very

well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 401

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

2002 HYDRO AX 621E Arouund 12,000 hours on this machine. Working daily.

Item ID 13884. Austin x703 711EX SAW HEAD ‘931998 Barko 180B FELLER BUNCHER

Item ID:ti14077 30.5-32 res at 40%; Cummins Contact: Austin Engine rebuilt 1500 hours ago; Ph: (888) 401-6367 8750 hours; Quadcox703 22” Large tree saw head. Heat and A/C work. New bearings in saw.

Cutting trees today.

Item ID 13353. Sam x702 KMC KMC TRACK SKIDDER 2500P John Deere Dual Arch Grapple, John Deere winch, Model 4000, Cummins Engine, ModelC6 6BTA, ‘95 John Deere Clark Transmission 28000.

Tree Item IDFarmer 13738. Austin x703 Item ID: 13920 KOMATSU Contact: Austin 2007 KOMATSU PC220LC Ph: (888) 401-6367 x703 w/2009 Log Max 7000XT processing head. 9700 hours on carrier. 7200 hours on Log Max. Excavator style. capacity!.

ItemFlotati ID 13421.

Sam x702 Cab guard. on pads.

One BARKO owner. Very good condition.

ID160B 13464.

Sam x702 1994Item Barko - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

❘

 LumbermensCO.com

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

** INFO LINK**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses.

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 13

Phone 315.284.4126 Fax Tight and dry. Cleaned, Serviced, 2008 KOMATSU D61-EX 315.849.2045 and Checked out for service.

DOZER Website Can pull loaded trailer. 4-Wheel Great Condition. 4511 Hours. www.empirehyd.com drive and steering. Top Quality Komatsu U/C at 95%.

35% Pads. Email “Precision Under Pressure” info@empirehyd.com

6 Way Blade. Fully Enclosed comfort cab. Great price!

Item ID 13570. Sam x702

machine. Would be great for log yard or mill work.

Item ID 13476. Sam x702

2012 KOMATSU D61EX 15 DOZER with only 750 Hours. Triple Rippers; Limb Sweeps; Enclosed cab with Heat/AC; 6 way blade; Undercarriage at 90%; Excellent Condition!

Item ID 13459. Sam x702

2011 LIEBHERR A904 RUBBER TIRED LOG HANDLER Liebherr 4 cylinder engine with great fuel economy. 11,230 hours. Fixed cab riser. Two section boom with 38’ reach.

Cab protection. 4-Wheel drive and steer. Can pull loaded trailer.

Cleaned, serviced and inspected.

Tight and dry and ready for work.

Located in Baltimore, MD. Item ID 13477. Sam x702

2014 KOMATSU 450 Only 1100 hours on this machine, in excellent condition.

Item ID 13937. Austin x703 LIEBHERR

2011 LIEBHERR A924 RUBBER TIRED LOG HANDLER 2007 LIEBHERR A924C Liebherr 4 cylinder engine with LOG HANDLER RUBBER great fuel economy.

11,230 hours.

TIRED LOG LOADER Fixed cab riser. Two section boom 13,000 hours.

40’ Reach with two 13428 Victory Ln. // PO Box 124 with 38’ reach. Cab protection. section boom.

Log NY Grapple Adams60” Center, 13606 4-Wheel drive and steer. Push with continuous rotation.

Fixed Cab Riser with cab guard blade. Can pull loaded trailer. protection. Front push blade. Cleaned, serviced and inspected.

Tight and dry and ready for work.

Located in Baltimore, MD. Item ID 13478. Sam x702 LINK-BELT 1997 LINKBELT 3400 - REBUILT PIERCE STROKE DELIMBER 36” Pads on 60% undercarriage.

5221 hours. Good H140 running ‘16 Halverson condition. Owner just spent Skidsteer (DEMO) $30,000 on upgrading delimber.

Item ID: JW-909632 Item ID 12992. Sam x702 Contact: JMORBARK Williams Ph: (888) 401-6367 x701 1987 MORBARK 27 WCL NEEDS MOTOR Morbark 1000 Knuckle boom loader, 3 knife disc, Newer discharge chute, New banding around disc, Brakes and tires are also OK, Everything works well Newer clutch -- with outboard bearing, Had Cummins KTTA 750 HP engine -- needs repower.

Item ID 12443. Sam x702

‘13 KMC 2500 Track Skidder 1997 MORBARK MODEL

2400 CHIPPER Item ID: 14078 Has a Cumins diesel engine and Contact: Austin runs great.

All fluids x703 and filters Ph: (888) 401-6367 have been changed.

Item ID 13429. Sam x702 off onto a conveyor. This is a very

well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 401

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

1999 MORBARK 1400 TUB GRINDER Loader w/Cab; 4200 hours; Very good condition. Located in PA. Item ID 13361. Sam x702

‘93 Barko 180B

Item ID: 14077 2006 MORBARK 6600 Contact: Austin GRINDER HORIZONTAL Ph: (888) 401-6367 x703 Approx. 6000 hours on this well maintained machine.

Has New Cat Dealer Rebuild 1000HP Engine at 5000 hours.

42” X 66-5/8” Hammermill; variable speed infeed system; Hammermill drive includes all belts, sheaves, bushings & shields. Engine gauge panel & emergency shut down system ‘95 John Deere C6 located in an anti-theft console.

Tree Farmer Electronic rpm sensor & auto feed system.

43013920 Gallon fuel tank. 238 Item ID: Gallon hydraulic Contact: Austinoil tank. IQAN control system.

Dust suppression Ph: (888) 401-6367 x703 system. Hyd operated debris containment door. 16 Function radio remote. Super package! capacity!. Item ID 13421. Sam x702 Optional new knife skin - $20,000 which is halfBARKO price of new.

1994Item Barko - Electric ID160B 12692.

Sam x702 knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

The Tree that Started it All!

feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production

Escanaba, Michigan

machine, with air strain conveyers that go up and down, with airbags,

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Woods Publishing MID-ATLANTIC

LOGGING & BIOMASS EXPO

it includes two sets of Mcdonough pressure guides. Top Casting wheel

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

10 hours on this machine since it has been rebuilt, it has a 24foot in

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

PUBLISHER

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

ADVERTISING SALES

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE

❘

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘

 (888) 401-MENS L!

NO. 15

Phone 315.284.4126 Fax MORBARK 1200 TUB 1992 PRENTICE 210D 315.849.2045 GRINDER LOADER Website Powered by a 3412 Cat engine, Excellent condition, very tight www.empirehyd.com 600-hp.

TiltUnder tub.

Hours are Email loader mounted on a 1989 “Precision Pressure” info@empirehyd.com

unknown. Please call Daren at Ext. 702 for more details.

Item ID 12919. Sam x702 WOLVERINE

1995 MORBARK WOLVERINE 3-WHEELED FELLER BUNCHER S/N 4073. Only 1000 hours on new JD 4 cylinder engine.

Recently replaced turbo. 23.1 tires at 50%. 16” Rapid Buncher shear head. Machine is fast and in very good condition.

Item ID 12531. Sam x702 PRENTICE

Mack truck with very good tires.

Item ID 13654. Sam x702

1997 PRENTICE 210E New 5.9 cummins engine, turntable bearing and seal, fuel pump and battery. Joystick, Heat and A/C, boom repinned, cylinders repacked. Total hours at 12000. Bucksaw hookup.

This loader is used to feed a chipper.

Item ID 13795. Sam x702

1999 PRENTICE 210E Comes with a bucksaw. Le1988 PRENTICE 210B vers, 11000 hours. Repacked New battery and starter a year all cylinders and valve body. ago, new alternator less than 2 This loader has only been years ago. Continuous rotation used to cut up logs into 9’ grapple, has 3-53 detroit lengths. Never used as a deengine, lever controls, plumbed limber loader.

13428 Victory Ln. // PO for bucksaw.

Mounted on Box a 124 Item ID 13784. Sam x702 Adams Center, NY 6-71 13606 1978 GMC Brigadier with detroit with a 10 speed. Runs 2014 PRENTICE 2384C everyday.

LOADER PACKAGE Item ID 13703. Sam x702 with CSI 264 Ultra Delimber and Rotobec 4048 Grapple.

Only 1050 hours! Mounted on trailer with hydraulic stands.

Excellent condition. Contractor shutting down job.

Item ID 13577. Sam x702 2432 2010 PRENTICE ‘16 Halverson SKIDDER H140 ItSkidsteer has 30.5 tires al the way (DEMO) around and has 6,000 hours on Item ID: JW-909632 the machine.

Contact: J Williams Item ID 401-6367 13382. Sam x702 Ph: (888) x701 PRENTICE 310E Good loader for the money.

Item ID 13762. Sam x702 PRENTICE 120C BOOM TRUCK Great tires, new paint, & lights, with a 350 Cummins Engine 3 stage jake.

ItemKMC ID 13900.

AustiTrack n x703 ‘13 2500

Skidder 1994 PRENTICE 180D LOG

LOADER Item ID: 14078 11,793 hours, Contact: AustinMachine is in good conditi on, it x703 has been Ph: (888) 401-6367 sand blasted and painted, low pro tires 17.5. off Item onto aID conveyor. a very 12759.This Samisx702 well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is a Chomper Model 16 PDA

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans andus produce Visit at the6 - 8 loads per Richmond ExpoAustin x703 day.

Item ID 13882.

Booth #B4 EDGERS- B8 & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 401

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

3-5

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

210 PRENTICE LOADER MOUNTED ON 2006 TRAILER Excellent condition.

Item ID 13505. Sam x702 LATE 80’S PRENTICE 210 ‘93 Barko 180B LOADER

Itemis ID: 14077 This a late 80’s model, it had a Contact: new motorAustin installed 2 years ago Ph: (888) 401-6367 x703 on it, with around 3,000 hours also comes with a circle saw.

Item ID 13879. Austin x703 1998 PRENTICE 210E It has the 600 turbo charged cummins engine, control valves have been redone, ac/heater work, it also has slasher saw hook ups. Dry machine, working ‘95 John Deere C6 daily.

Tree Item IDFarmer 13913. Austin x703 ROTOCHOPPER Item ID: 13920 Contact: Austin 2011 MC266T Ph: (888) 401-6367 x703 ROTOCHOPPER This is a great chipper with only 3600 hours. It has a 500hp C15 Caterpillar power unit. capacity!.

Item ID 13421.

SamComes x702 with spare bolts, teeth, screens BARKO and bearings.

1994 Barko 160B - Electric Item ID 13837. Sam x702 knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

❘

 LumbermensCO.com

2014 B66TD ROTOCHOPPER This machine is still like new with only 1300 hours on rotor and 1600 on engine. This is a track and dolly system, which makes it easy to move. Has a magnetic head roller, 48” rotor with 28 teeth and a 700hp C-18 Caterpillar power The Tree unit. This rotochopper sells for over that Started $600,000.00 new.

Item ID 13838. it All!Sam x702 Since 1986, Lumbermens 2000 TIGERCAT 845Bhas published a monthly circular it has 8900 hrs. the Hydraulic reaching sawmills, loggers, Pump haIGERCATs 2000 hrs on pallet makers, recyclers and it.industrial We replaced the sawplants pump woodworking last summer. Ready to go! worldwide.

** CALENDAR**

16,000 hours on the machine, new land clearing business. Often idled motor put in around 10,000NY hours, hours. Total hours 19,500.

STATEfor WOODSMEN'S FIELD DAYS CTR Delimber trailer included, Fri, and 18 August Item ID 13575. x702 - Sun, 20Sam August reversible CSI Bucksaw, will sell Boonville, New York 2006 TIGERCAT 630C with, or without Bucksaw. www.starwebhosting.net/woodsmen/ Item ID 13911. Austin x703 GRAPPLE SKIDDER VeryFOREST good running condition.

Dual SOUTHWEST PRODUCTS EXPO 2005 TIGERCAT 822 Fri, 25Arch grapple.

New2635.5 tires. Only August - Sat, August 4500 hours. Arkansas Winch. Compare to TRACKED FELLER BUNCHER Hot Springs, Good running condition. Tigercat www.arkloggers.com new 630 at $310,000!

Item ID 13576. Sam x702 22” Hot Saw with 40 degree tilt.

72ND ANNUAL GREAT LAKES New center bearing and swing LOGGING & HEAVY EQUIPMENT EXPO motor. Undercarriage at 50% or 2007 TIGERCAT 250B Thurs, 7 Sept Sat, 9 Sept better. Very clean. High hours, but W/WARATAH PROCESSOR Michigan 2007 Tigercat 250B Crawler well cared for by single owner of Escanaba,

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Item ID 13619. Sam x702 PUBLISHER Woods Publishing

2000 TIGERCAT 845B ADVERTISING SALEShours This 845B has 14000 frame Morris Woods with 5000 hours on an 8.3 cummins (888) 401-6367 ext. 704 engine.

New sprockets, bottom morris@lumbermens.coand top rollers, rails, idlers, 36” tracks, MARKETING DIRECTOR seat and all new A/C parts. Track John Williams adjusters, all cylinders on head (888)and 401-6367 ext. 701 have been repacked.

Comes j@lumbermens.co with a 22” hotsaw with 45 degree DESIGN DIRECTOR rotate. This is a very clean cutter, Donna Heninger owner just wants to update.

REPS Item EQUIPMENT ID 13939. Sam x702 Sam Wall (888) 401-6367 ext. 702 2004 TIGERCAT 240B sam@lumbermens.co

KNUCKLEBOOM Austin Woods New 5.9 cummins crate engine (888) 401-6367 ext. 703 with 2500 hours, turntable good, austin@lumbermens.co 243 CSI delimber, good tires, brakes, MAILING and lights.ADDRESS 7500 hours.

Box 1916 Item IDP.O. 13666.

Sam x702 Columbia, TN 38402-1916 (888) 401-6367

2004 TIGERCAT 620C AD SUBMISSIONS Single arch, new engine 2 months May be sent to­ ago, has about 13,500 hours, needs morris@lumbermens.co a couple of windows. Tires at 50%.

Item IDPOSTMASTER 13667. Sam x702 Send address changes to: Lumberman's Exchange 2004 P.O. TIGERCAT 630C Box 1916 New 35.5’s on rear and on front, Columbia, TN 25% 38402

comes with 2 spares. Engine has The Lumberman's is 4500 hours, with Exchange 12000 machine published monthly by Woods hours.

Two new wiring harness.

Publishing, P.O. Box 1916, Item ID TN 13749. x702 Columbia, 38402. Sam All rights

reserved. All editorial/ advertorial submissions are used at the 2004 TIGERCAT 845B discretion of the publisher and may with Waratah 622 Processor. New be edited for purposes of clarity screen, wheels, sprockets and wheel and space.

Although all efforts have motor.

Owner used itaccuracy for a month been made to ensure of content submitted by advertisers before parking it. 5,000 hrs. on 8.1 and writers, the Lumberman's cummins engine, and 6990 total hrs.

Exchange, its principles and Item IDare 13625.

Sam x702 associates, not held liable for errors or omissions. Reproduction, in whole part, is prohibited 2005orTIGERCAT 230Bwith­ out written consent.

Tight, and dry machine, with ©2017 Woods Publishing

MID-ATLANTIC

LOGGING & BIOMASS EXPO

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct Cambridge, Ohio www.ohioforest.org

** INFO LINK**

FOR CLASSIFIEDS Call 888.401.MENS with 2005 Waratah 622B Processing Head.prices, 9500 hours.

See pictures, and The 622Bof Waratah head at is Location all equipment in great shape. 3 new wheel www.LumberMB\ISmagazine.com motors on the head all new pins

and bushings. Head has been BANDMILLS & HEADSAWS totally rebuilt less than 500 hrs Danckaert - Roughly ago.

The Band swingResaw motor on the carrier just machine been rebuilt and 10 hourshas on this since it ahasnew pump.

U/Cinat beenHydraulic rebuilt, it has a 24foot 50%. Currently processing 600 feed deck 20 foot out feed deck tons/day. Runs great. Owner with 44 inch wheels, and all the shutting down. bells and whistles, a production Item ID 13360.itsSam x702 machine, with air strain conveyers

that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses.

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Carriages (Sawmill) - Cardinal Visit us at the Carriage line it includes carriage Richmond Expo with onboard log turners, carriage Booth #B1 drive, hyd pac for carriage,

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 17

Phone 315.284.4126 Fax 2009 TIGERCAT 620C 2012 TIGERCAT 724E 315.849.2045 This skidder only has 10575 FELLER BUNCHER Website hours with a cummins enginewww.empirehyd.com and 2950hrs. 30.5 tires. Like new machine. One owner. Very well fire suppression Tires are Email “Precision Undersystem.

Pressure” info@empirehyd.com

30.5 X 32 with 20% front, 1 new rear and 1 rear at 50%, 4 tire chains at 40%. Dual arch and no winch, extra fuel tank and tight center pins. Excellent skidder ready to start dragging wood.

Item ID 13928. Sam x702 2009 TIGERCAT H250 TRACKED HARVESTER Tigercat Model 575 processing head. 10,880 hours. U/C at 60%. Everything runs well and has been very well maintained.

Item ID 13592. Sam x702 2010 TIGERCAT 480 TRACKED MULCHER 3410 hours. $32,000 in recent upgrades and repairs. Fecon BH250 Mulching Head.

Item ID 13502. Sam x702

maintained.

Item ID 13528. Sam x702

2014 630 D TIGERCAT 1300hrs like new inside 35 by 15, CB, light package, large grapple and wench.

Item ID 13408. Sam x702 2014 TIGERCAT 630D GRAPPLE SKIDDER Dual Arch Grapple. Just 1990 hours. 3 year/5000 hour PT warranty. 35.5 tires with dualing rings at 60%. Wide blade. Winch.

Item ID 13526. Sam x702

2015 TIGERCAT 234B LOADER Model 234B. Only 300 hours on this machine, this machine 13428 Victory Ln. // PO Box 124 is extremely fuel efficient, and Center, NY 13606 very quiet. In the cab, it has 2011Adams TIGERCAT 620D This is a low hour skidder with heated and cooled seats. runs only 5500 hours on a cummins like new.

Item ID 13880. Austin x703 engine and a fire suppression system. Comes mounted on 35.5 tires at 50% back and 40% 99 TIGERCAT 240B LOADER front and good chains on all 4 This loader is a package deal, tires. Has the bigger 630 axles portable, and mounted on a and no winch. Center pins are dump truck from the eighties.

‘05this Gehl CTL 70mounted tight and extra fuel tank.

Also loader can be Item Item ID 13929. Sam x702 back onID: itsJW-986495 trailer with delimber.

J Williams ItContact: has 4509 hrs on a reman Ph: (888)engine.

401-6367 x701 Cummins 2011 TIGERCAT 845C ‘83 John Deere Just over 4000 hours. 5400 Item ID 13455. Sam x702 head and 340 degree rotation, 4850 chain conveyer, 8 way splitter, on undercarriage at 70%. Mercedes TIGERCAT 230B Item ID: 14073 engine and fi re suppression sysThis Tigercat has a Cummins 20,000lb goose neck trailer.

Item5.9 ID Contact: Austin tem.

This is a great buy for for liter 360 Conti nuous roatati on on 13916. Austin x703 Ph: (888) 401-6367 x703 such a super clean track cutter. the grapple w/ a 30’ reach on the Best Value Portable Log Splitter Item ID 13927. Sam x702 boom. Joystick Controls, triple

pump hydraulics, Stick and swing function w/ a fully enclosed Cab. Machine is located in Florida.

Item ID 13643. Chris x700

Cummins 6CT8.3 engine with 215 HP. Machine runs great. Working in select hardwood today.

Item ID 13548. Sam x702

TIGERCAT 250T TRACK LOG LOADER ‘16 Halverson H140 Cummins 8.3 engine and pumps have been done probably Skidsteer (DEMO) 8,000-9,000 hours ago. It has Item ID: JW-909632 45,000 hours.

This machine has Contact: J Williams never run in the woods.

Ph: (888) 401-6367 x701It has been in a yard the whole time.

Tracks are around 50% and this machine has been extremely well taken care of!

Item ID 13608. Chris x700

1997 TIMBCO 820C CLAM ‘93 Barko 180B BUNK FORWARDER

2006 TIGERCAT 630C GRAPPLE SKIDDER Very good running condition. Dual Arch grapple. New 35.5 tires. Only 4500 hours. Winch.

‘13 KMC 2500Compare Trackto new 630 at $310,000!

Skidder Item ID 13576. Sam x702 Item ID: 14078 2014 630 D TIGERCAT Contact: Austin 1300hrs like 401-6367 new inside 35 by 15, CB, Ph: (888) x703 light package, large grapple and wench.

Item ID 13408. Sam x702 off onto a conveyor. This is a very

2014processor.

TIGERCAT well built Item630D ID 13820.

GRAPPLE SKIDDER Sam x702 Dual Arch Grapple. Just 1990 Firewood Processor - This is hours. 3 year/5000 hour PT a Chomper35.5 Model 16 PDA warranty. tires with dualing automatice firewood processor rings at 60%.

Wide blade.

Winch.

Item 13526.

Sam x702 with JohnID Deere power unit with TIMBCO low hours. Control panel includes

with 1700 hours, in very good

- Small manufacturer in PA has

1996 TIMBCO T425B tach, oil pressure, water tempFB and w/2008 Rotosaw Intermitt amp gauges. Cuts logs up to 16”.ent Saw Head. Machine has 540 One owner and comes with all degree non continuous rotation manuals and receipts.

Purchased on upper.

9900 hours.

New new for $32,500. New Item ID 13865.

Undercarriage. glass in cab.

Very good running condition.

Sam x702 Rotosaw has 360 degree rotation.

LOGGING EQUIPMENT

quality chips with patented ‘Cone’

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

condition. Easily produces high

made the best valued log splitter.

BANDIT

Item ID: 14077 “4000” original hours. 20.3 x 25 Contact: Austin rubber at 70%.

Hand sanded and Ph: (888) 401-6367 x703 and painted, brand new computer Scorpion controls, added speed control. 2 sets of tracks , all new Lexan. Located in Alberta, Canada.

Customer will pay shipping to closest US entry point.

Item ID 13532. Sam x702 1998 TIMBERLINE STROKE DELIMBER ‘95 John Deere C6 8400 hours. U/C at 60%. Will TreeandFarmer crank run. Owner retired.

Machine for past year.

Item ID:idle 13920 Item ID 13599.

Contact: Austin Sam x702 Ph: (888) 401-6367 x703 1999 TIMBCO 820D CLAM BUNK FORWARDER 10,300 hours. New engine capacity!. Item ID 13421. Sam x702 less than 500 hours ago. Can BARKO accept bunks, but none with 1994 Barko 160B - Electric machine.

Owner has two sets knuckleboom, boom, 75hp of tracks like 30' new he will add for additional $20,000. motor, Rotobec continuous Item5,000 ID 13494. x702 grapple, originalSam hours. (excellent condition.). Item ID

1999 TIMBCO TF-820D

13238. Chris x700 FORWARDER

1995 Bunchernew 11k Barko hrs 775 onB Feller machine,

engineredone. at around -Cummins Pumps recently 400 8k hrshrs andinjection has fresh drive pumpstarted & imp. on pump. always

pump. 28L 26 tires some great, some decent. Machine is ready kohing head. head works great. to work, but could use a little Item ID 13185.

Sam x702 fixing here and there. the bucket is sloppy be pinned 1999 Barkocould 160Dstand - newto engine with and bushed.

No major issues! approximately 1500 hours. Hour Item ID 13212. Sam x702 good. in good working order. 22in

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

ROW ELECTRICAL EQUIPMENT, INC.

drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

Chipper - Cat Under Carriage at

adjustable to single two way. Great• • Squirrel Cage Motors • Gear Motors Value!

PA. Item ID 12062. Sam x702• • Wound-Rotor Motors • Firewood Processor - This is a • Synchronous Motors • homemade processor with a 10’ • • DC Motors log deck. Has a hydraulic grapple,

maintained.

13294.• DCWell Motors - CraneItem andIDMill Adjustable • Sam x702 Speed Drives Generators - AC and DC • 2004 Bandit Beast Model 4680 Engine-Generator Sets • 3412 Caterpillar Diesel engine • Transformers, Single Phase with 850 HP. 5300 hrs. Mill in

Item ID 13694. Sam x702

with low atThree-Phase hours at 3,500. 5.9 Transformers, Across/Line Magnetic Starters CUMMINS continuous grapple.

Reduced Voltage Starters Runs Great!. Item ID 13740. Sam Safety Switches x702 Phase Convertors

BELL

Faxchain toand : kickerWWW.RoWELECTRiCAL.CoM that all runs off good condition. Just finished 10 1990 Bell Super T - This Bell has 800-248-4479 P.O. Box 2812 • Toledo, Ohio 43606

Acre clearing job, ready to work! of a 4 cylinder Mercedes power 419-244-8887 rowelec@glasscity.net sales@rowelectrical.com

- It has a 353 Detroit diesel, 40

Boom cylinders have minor leaks.

Has Log Lift. Uses 4-way wedge Diesel.

7500USED, Hours. One owner.

94 Barko 275 - Excellent value YOUR SOURCE FOR RECONDITIONED:

Brewco Saws - Two Brewco Saws

2010 Shop Built Wood Processor

13HP Honda motor. Manual start

inch insert tooth circle saw, 30 foot  Issue 364 401

Lumbermens™  since 1986

❘

Remote control. Big production

a brand new Duetz engine. Lever 419-248-4479

control, 33” bar, pump and tranny WE ANSWER THE PHONE 24 HOURS • WE BUY USED ELECTRICAL unit. Has a 4’ chain saw that kicks

 List  seLL  exchange  buy  save

❘

 LumbermensCO.com

** CALENDAR**

2000 TIMBCO 415D w/2005 FABTEK 4-ROLLER PROCESSOR 21,000 hours on meter. New JD 6 cylinder engine in 2011 has 7000 hours. U/C at 65%.

Extensively rebuilt with new swing motor, new charge pump, Tree new high The speed saw motor, that Started new main hydraulic pump, new oil cooler, allit All! main cylinders repacked. Package includes Sincefi1986, Lumbermens has extra nal drive, extra computer published a monthly circular screen, and extra swing motor. reaching sawmills, loggers, Has new jet fit system. This pallet makers, recyclers and machine loaded...hasplants proindustrialiswoodworking heat system for cold weather worldwide. start. Has fire suppression PUBLISHER system. Woods All working!

Hydraulic Publishing Oil just totally changed (100 ADVERTISING SALES new gallons) with new filters.

Morris Woods Item ID 13598.

Sam x702 (888) 401-6367 ext. 704

FOR CLASSIFIEDS Call 888.401.MENS 1979 TIMBERJACK 240 GRAPPLE SKIDDER W/ WINCH See pictures, prices, and Excellent condition. New Locationrunning of all equipment at brakes, 23.1x26 tires Holds air. Best www.LumberMB\ISmagazine.com sounding 453 Detroit out there. Starts

saw. Fire suppression system.

TIMBER KING Auxiliary oil cooler. NY Good STATE WOODSMEN'S FIELD DAYS 2005 TIMBERKING 560 DS running machine.

Fri, 18 Same August Sun, 20 August as Prentice 2384, 9500 Item ID 13549. Sam x702 Boonville, York hours on New perkins engine with www.starwebhosting.net/woodsmen/ new injector pump and ECM 2000 TIMBCO 445D in Very cold weather on first try.

by Cat. CSI delimber, good A/C, BANDMILLS & HEADSAWS Recent engine and pump last Item ID 13560.

Sam x702 SOUTHWEST FOREST PRODUCTS EXPO tires, and lights.

Danckaert Band Resaw - Roughly winter. New sprockets and rollFri, 25 August Sat, 26 August Item ID 13636. Sam x702 ers. 22” quadco hot saw. Owner Hot Springs, Arkansas 1982 on TIMBERJACK 240Ait 10 hours this machine since retired. Located in Montana.

Tight, Clean Skidder!

Brand New www.arkloggers.com has been rebuilt, it has a 24foot in 2006 711 TIMBERKING Item ID 13790. Sam x702 Crate Motor 453 has roughly 6,716GREAT hours.LAKES with 7,000 feed deck 20 foot out feed deck 72NDWith ANNUAL 500 hrs on it,winch rebuilt, logmax processing head& fire with 44 inch wheels, and all the LOGGING & HEAVY EQUIPMENT EXPO 05 TIMBERPRO 830TF starter rebuilt, master cylinder suppression system.

Thurs, 7 Sept - Sat, 9 Sept Under rebuilt, bells and new whistles, a production FORWARDER battits eries, battery carriage is real good, Runs and 6580 hours. Very good condition. Escanaba, Michigan wires 4 brand new iceconveyers chains, 6 machine, with air strain works Great! newgo slides n tear drops, leaks Tracks for all bogies. 710/45-26 that up and down, withno airbags, ItemLOGGING ID 13737.&Sam x702 MID-ATLANTIC BIOMASS tires at 70%. Includes bolsters n all the pins are super tight. it includes two sets of Mcdonough TIMBERJACK and back rest. Comes with 36”Fri, 15 Sept - Sat, 16 Sept New belts n some new hoses. pressure guides.

Top Sam Casting wheel 1969 TIMBERJACK North Carolina 225D grapple with grapple saw option. Selma, Item ID 13557. x702 www.midatlantic-logging-biomass­ is supported on both sides. This SKIDDER Set MID-ATLANTIC up with harvester hydraulics expo.com/ LOGGING &to BIOMASS EXPO ring chains front ice chains rear, is an according owner.

1989 TIMBERJACK 230A extremely accurate machine very good condition!

Item ID 13161. Sam x702 It has good a 4bt cummins engine, in ve1y condition, Cuts 130 KENTUCKY Item IDWOOD 13215.EXPO Sam x702 4 speed manual shift , and only morris@lumbermens.co feet a minute also has CLT presses.

2000 TIMBCO 425D W/33” 2006 TIMBCO/VALMET Fri, 15 Sept - Sat, 16 Sept 3,411 original hours, comes with MARKETING Item ID 13876.

Austin x703 tires.

Lexington, Kentucky 1968 230 TIMBERJACK BAR SAW DIRECTOR HEAD 445EXL W/BAR SAW 4 new firestone 23.1-26 LUMBERMEN’S Equipment Digest John Williams http://www.kfia.org/ S &W 125 Band Mill with have all SKIDDER 40 degree ti lt on head.

540 9200 hours.

One owner machine.

The transfer case & winch PO Box 1146 (888) 401-6367 ext. 701 New 353 Detroit engine, new degree j@lumbermens.co rotation on upper 33” Bar Saw Head with 360 degreeKentuckyWoodExpo.aspx new seals, and bearings.

Caterpillar generator - Low hours Columbia, TN clutches, 38402-1146 Equipment Machine is Fax body. One year old Cummins rotation. Tracks at 60%. Runs tranny. Runs great!

New brakes have been installed 1-800-477-7606 (931) 388-3564 on the mill, electronic computer Set Digest DESIGN DIRECTOR THEtiPAUL BUNYAN SHOW www.lumbermenonline.com ght. She’s a workhorse!

6CT8.3 Donna engine.

Resealed good and machine is ti ght.

Reman as well as new master cylinders.

Heninger works,1 1/2" or 2" band, 22ft. track Fri, 6Item OctID - Sun, 8 Oct 13470.

Sam x702 pumps. Rebuilt valve bank. 90% Cummins 6BT8.3 one year old.

Very clean and tight machine.

Cat 3406ID140KW Genset, Cambridge, Ohio EQUIPMENT REPS undercarriage. Can accept hot Item ID 13556. Sam x702 Item 13885.

Austi12,400 n x703 Sam Wall www.ohioforest.org hours ready to run. Item ID 13434.

LUMBERMEN’S

(888) 401-6367 ext. 702 sam@lumbermens.co

Sam x702

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

2010 Cardinal HD Carriage

** Them INFO LINK** PROTECT ALL ® With Pro-Tec-To Wrap

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

CARRIAGES & DRIVES

Carriages (Sawmill) - Cardinal Carriage line it includes carriage with onboard log turners, carriage drive, hyd pac for carriage, sawyers cab, computer controls,

Hydraulic Lines – Fuel.....................

Hoses27– Metal Air Detector's Lines Inc. .............. 30 Bell's Machining Brute Force Mfg. .....................

31 Midwest Sharpening.............. 26 Electric Wire Bundles – Control Cables POSTMASTER

May be sent to­ morris@lumbermens.co

cabinet with electronic drives for carriage knees, husk including 48" bottom saw and 36" top saw

Buck Equipment (AIM) ........ 36 Morbark ..................................... 9 Send address changes to: Lumberman's Exchange ®Corley Mfg .............................. 32® Multitek ................................... 12 P.O. BoxPRO-TEC-TO 1916 WRAP & PRO-TEC-TO SLEEVE Columbia, TN 38402 CRD Metalworks .................... 25 Piper's Saw Shop.................... 13

STACKING RAC

CUT YOUR DOWNTIME AND YOUR COSTS!

The Lumberman's Exchange is CW Mill-ArmorHog .............. 17 Rotochopper............................ 40 Protection published monthly

by Woods Against Pinching, Crushing, Rubbing & Abrasion CW Mill-Hogzilla ................... 15 Row Electric ............................ 20 Publishing, P.O.–Box 1916, UV RAYS! Both EVEN are Impervious to Oils and Solvents.

Columbia, TN 38402. All rights Dyna Products ........................ 35 Sawmill Exchange .................. 11 reserved. All editorial/ advertorial submissions are used at the Provides Maximum ProtectionEmpire for Logging, For Sawmill The Distributor Hydraulics ................... 8 Select ......................... 19 discretion of the publisher and may Construction & Stationary Applications Like: Nearest You, Call be edited for purposes of clarity Great Lakes Mfg. .................... 34 Smith Sawmill ........................... 4 • Debarker Buggies • Pantograph Arms • Forklift Masts and space.

Although all efforts have Hahn Machinery ...................... 3 The Paul Bunyan Show ......... 39 been made to ensure accuracy of Grapples • Wheel Loaders • Skidder • Knuckleboom Loaders or Visit content•submitted by advertisers Fellerbuncher Heads • Harvesting Heads • Stroke Hurst Boiler .............................

14 Thomas Industrial Controls..... 10 www.pro-tec-toproducts.com and writers, the Lumberman's Delimbers • Dozer Blades Exchange, its principles and Iron Bull ................................... 21 Union Grove Saw & Knife.. 2, 37 associates, are not held liable& forWires Are – Pro-Tec-To® Products Anywhere Hoses OEM’s, Repair Facilities & errors or omissions.

Reproduction, KilgoreCosts, Saw .............................

22 Distributor UniversalInquires Refiner ................... 23 Offers Maximum Protection, Lower Reduced Welcome in whole or part, is prohibited with­ Downtime and Less Spills!

Lignomat ................................. 24 WoodMizer ................................ l out written consent. ©2017 Woods Publishing

800-355-1250

- USED FORESTRY EQUIPMENT FOR SALE

❘

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘

 (888) 401-MENS L!

NO. 19

Phone 315.284.4126 Fax 1998 TIMBERJACK 360 1993 TIMBERJACK 1010 315.849.2045 FORWARDER CABLE SKIDDER Website 16,000 hours. Good running This is an excellent skidder with www.empirehyd.com conditi on. 6 wheeled.

Tracks for rear Email only 6650 hours. New center “Precision Under Pressure” info@empirehyd.com

bogies and chains for front tires.

Item ID 13446. Sam x702

1993 TIMBERJACK 380B PG HIGHLIFT TREE TRIMMER s/n CM4478, 5,152 hours, Delivered New in 1995, Cab with A/C, 5 blades, 75 reach, Branton Winch, Push Blade, 4X4, Firestone 67X34.00/26 tires @ 90%, Counter Weight, 6 cylinder Cummins Diesel Engine. FOB:Okeechobee, FL. Item ID 13090. Sam x702 1994 TIMBERJACK 450C Grapple with winch, new transmissiion and hydraulic pumps.

Item ID 13826. Sam x702

section. Cummins engine with electronic automatic transmission.

Item ID 13777. Sam x702

1998 TIMBERJACK 460 Excellent Condition. Runs great.

WOODS READY. Item ID 13545. Sam x702 2001 TIMBERJACK 460C This is a single arch with winch with only 6800 original hours.

This is a very low hour machine.

Cummins 5.9 engine has a crack in it. It can be loaded onto a lowboy. This would be great starter skidder with a new engine.

Item ID 13829. Sam x702

1997 TIMBERJACK 240D 2005 TIMBERJACK 460D This skidder comes with 23.1 Same thing as a John Deere X 26 tires at 95% rear and 648GIII. Around 12000 Hours 13428New Victory Ln. // PO Box 30% front. brake bands in 124 with new engine, dual arch, Adams Center, NY 13606 winch and good cable. Engine comes with 77 X 44.00 X 32 was rebuilt 2 years ago. Good tires. 3 at 60% and 1 new one. strong running machine.

Excellent skidder.

Item ID 13917. Sam x702 Item ID 13709. Sam x702

SHRINK‘05WRAP Gehl CTL 70 FIREWOOD/WASTEWOOD Item ID: JW-986495

Contact: J Williams Ph: (888) 401-6367 x701

‘83 John Deere 4850

chain conveyer, 8 way splitter, on

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter

Sell Your WOOD – $300/cord or More!

- Small manufacturer in PA has

with 1700 hours, in very good

condition.

Easily high Double orproduces triple your

made best valued log splitter. profits bythe shrink wrapping

qualitywastewood chips with patented ‘Cone’ - firewood

Handles logs up to 32”. Uses with WOOD-PAKER! 13HP Honda Manual start packages canmotor. be obtained vans and produce 6 - 8 loads per but electronic option is and available. with our high production, easily operated day. Item ID 13882.

Austin x703 Has Log Lift.

Uses 4-way wedge affordable machines. Eight machines available. & GANGS for producing adjustable to single two way. Great The EDGERS ideal equipment square bundles palletizable ease in storage and transporting.

Brewco Saws - Two for Brewco Saws Value! PA. Item ID 12062. Sam x702 for free details. in excellent condition.Inquire Runs great.

Firewood Processor - This is a drum design. Can easily load 42’ Attractive various size

ItemB ID Sam x702• 3007 West River homemade a 10’ & B13644.

Manufacturing Road •processor Olean, NYwith 14760

FIREWOOD PROCESSORS

log deck. Has a hydraulic grapple,

716-373-5881

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

chain and kicker that all runs off of a 4 cylinder Mercedes power

E-mail: bbmfg@verizon.net • Web: www.thewoodpaker.com unit. Has a 4’ chain saw that kicks

inch insert tooth circle saw, 30 foot  Issue 364 401

Lumbermens™  since 1986

❘

2005 TIMBERJACK 608B This cutter has 10800 frame hours with a new undercarriage with less than a 1000 hours, 36” pads. It does have some small leaks. Owner is going back to rubber tired cutters because his job has changed.

‘16 Halverson H140 Item ID 13898. Sam x702

Skidsteer (DEMO)

Item TIMBERJACK ID: JW-909632240 In excellent condition! Well Contact: J Williams maintained with 453 detroit.

Ph: (888) 401-6367 x701 Lots of new parts.

Item ID 13785. Sam x702

TIMBERJACK 380 SKIDDER Tight machine. Runs great. Low Hrs. One owner.

Item ID 13468. Sam x702 TIMBERJACK 460 GRAPPLE SKIDDER This machine is an excellent conditi on. Running daily!

‘13 KMC 2500 Track Item ID 13860. Sam x702

Skidder

overhauled out of frame. Has a new Injector pump and all new injectors. 25% on tires on it.

Item ID 13283. Chris x700 450B TIMBERJACK ‘93‘88 Barko 180B Put new centerpins in 8 months Itemit ID: ago, has14077 a new eslking beams Contact: Austin & new radiator.

Goo winch, 100” Ph: (888) 401-6367 Esco grapple, all new x703 drive lines, excellent 6 cyl cummins motor, good brakes. It’s skidding 25-30 loads a week on smaller jobs.

Item ID 13327. Chris x700 1979 TIMBERJACK 230 FORWARDER Good running forwarder with 80% rubber. Serial Number: ‘95 John Deere C6 792888. Open cab. Detroit TreeSimple Farmer engine. but hard working machine. clean for its’ age.

Item ID:Very 13920 Hard to find.

Contact: Austin Item ID 13057.

Sam x702 Ph: (888) 401-6367 x703

‘69 207 TIMBERJACK Item ID: 14078 CABLE SKIDDER This Machine Contact: Austinhas a Brand new 4 cyl Perkinsx703 Engine, Ph: (888) 401-6367 Major Overhaul out of frame.

Transmission has been off onto a conveyor.

This is a very completely overhauled out of Reverse also well frame. built processor.

Itembox ID 13820.

1996 TIMBERJACK 230 FORWARDER capacity!. Item ID 13421. Sam x702 15,000 hours. Good running BARKO today. Serco condition. Working 1994 Barko 160B Loader.

Dry and- Electric still runs strong. knuckleboom, 30' boom, 75hp Item ID 12943.

Sam x702

Firewood Processor - This is

(excellent condition.). Item ID

Sam x702

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT BANDIT

1999 Bandit 1900 Tracked Disc

Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins

Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

motor, Rotobec continuous

grapple, 5,000 original hours.

13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

 List  seLL  exchange  buy  save

Ite Co Ph

Item ID 13694. Sam x702

good condition. Just finished 10

Acre clearing job, ready to work!

20

a brand new Duetz engine. Lever

❘

 LumbermensCO.com

‘14 Lo

** CALENDAR**

► Fax: (515) 598-729 Phone: (888) 237-4195 FOR CLASSIFIEDS

1980 TIMBERJACK 240E CABLE SKIDDER Has the big 23.1x26 tires (60%) with brand new chains on all 4.

Detroit 4-53, Gearmatic 119 winch with 10 chokers. 4 speed manual transmission. Professionally made grapple on front blade.

Just put a The BrandTree new Hercules that Winch on. ThisStarted machine starts, runs and operates it All!like new. You won’t find one in better shape.

Since Lumbermens has Item1986, ID 13542.

Chris x700 published a monthly circular reaching sawmills, loggers,

1986 TIMBERJACK 240A SKIDDER pallet makers, recyclers and 23.1 tires. woodworking Recently overhauled industrial plants engine.

Machine close to worldwide.

13,000. Engine only 400 to 500 PUBLISHER hours. Woods Publishing Item ID 13944. Austin x703 ADVERTISING SALES Morris Woods TIMBERJACK 380B (888) 401-6367 ext. 704 DOUBLE ARCH SKIDDER morris@lumbermens.co

5.9 cummings with 4 speed DIRECTORNew powerMARKETING shift transmission.

John Williams gauges(888) on 401-6367 the dashext. so701 hours unsure. New LED lights all around. j@lumbermens.co Motor has rotary injection pump.

DESIGN DIRECTOR Winch is good.

Recently came off Donna Heninger the job and is field ready.

EQUIPMENT REPS Item ID 13942. Austi n x703 Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

TIMBERJACK 380B SKIDDER 2002 TIMBERJACK 608S Single arch skidder withNY a new WITH HOTFIELD SAW DAYS STATE WOODSMEN'S 5.9 cummings motor, less than Machine Fri, 18 Approx.

August 6000 - Sun,hours, 20 August is in very good shape and has 200 hours. Rebuilt 4 speed power Boonville, New York shift transmission. Good www.starwebhosting.net/woodsmen/ center been well maintained.

Item ID 12194. Sam x702 pins. Winch has new brakes, good grapple. New inlineSOUTHWEST bosch FOREST PRODUCTS EXPO injection pump, makes the motor ‘98 TIMBERJACK 1270B Fri, 25 August - Sat, 26 August come alive. rear tires 60/70% Hot 7,300 hrs. Arkansas Perkins 6 Cylinder Springs, front tires 20/30% Machine is www.arkloggers.com Engine. All modules and field ready. 1 set of ice chains for computer are brand new. Tires 72NDon ANNUAL LAKES 80% an additional $1000. averageGREAT are around & HEAVY EQUIPMENT EXPO Item ID 13941. Austin LOGGING x703 Video: http://youtu.be/R_ Thurs, 7 Sept Sat, 9 Sept MQZe5QEFw. Escanaba, Michigan 2002 TIMBERJACK 460D Item ID 13572.

Chris x700 This skidder is the same thing VALMET MID-ATLANTIC LOGGING & BIOMASS as a 648GIII and is in excellent 1998 VALMET 603 Sept - Sat, 16 Sept condition. New engine hasFri, 15 3-WHEELED BUNCHER North Carolina about 4000 hours. Torque Selma, 6500 hours on total machine convertor transmission. 14www.midatlantic-logging-biomass­ hole but no hours on 4BT3.9 Reman MID-ATLANTIC expo.com/ LOGGINGTires & BIOMASS wheels. are EXPO 30.5’s at 55% Cummins Engine. Equipped and one at 80%. Center has very with 18” Waratah High Speed KENTUCKY WOOD little slack. This skidder has been Disc Saw. 28L xEXPO 26 Tires at 15 Sept - Sat, 16 Sept a back up skidder for the severalFri, 40% complete with Kentuckychains. This years. Skidder has 12000 hours. Lexington, machine has been extremely well http://www.kfia.org/ Item ID 13805. Sam x702 maintained and runs very well.

KentuckyWoodExpo.aspx Hard to find them in this good 1981 TIMBERJACK 520 ofPAUL conditi on. Has SHOW a twin that is THE BUNYAN Very hard to come by! 653 available if you need two units.

Fri, 6 Oct Sun, 8 Oct Detroit. Runs Great!

Item ID 12524.

Sam x702 Cambridge, Ohio Item ID 13741. Sam x702 www.ohioforest.org

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

Call2005 888.401.MENS VALMET 860.1 8-WHEELED See pictures,FORWARDER prices, and 17,800 hydraulic Locationhours. of allNew equipment at transmission and gear box in www.LumberMB\ISmagazine.com 2013. $70,000 of updates in

2012. Bogies just resealed.

BANDMILLS HEADSAWS Spare pump & ($7,000 value) Danckaert Band Resaw - Roughly Good running condition.

Sisu engine uses 4 gal/hour.

10 hours on this machine since it16 ton capacity. of Mud has been rebuilt,One it hasset a 24foot in Tracks. Front blade. Hood feed deck 20 foot out feed deck guard. with 44 inch wheels, Sam and all the Item ID 12267. x702 bells and whistles, its a production

2005 machine, withVALMET air strain941 conveyers

that go upHARVESTER and down, with airbags,

Totally refurbished head to toe! it includes two sets of Mcdonough Very good running condition. pressure guides.inTop Casting wheel Over $50,000 recent updates is supported on both sides. and maintenance.

New This center pin new bogey seals; is anbushings; extremely accurate machine valves resealed; all Cuts cylinders in ve1y good condition, 130 packed. 10,200 hours. Largest feet a minute also has CLT presses. of rubber tired harvesters. Has Item ID 13876. x703 head Valmet 370.2Austin processing S & W less 125 Band Mill4000 with hours. with than Engine runs well. Tires 50%.

Caterpillar generator - Lowathours This a hard to find gem and on theismill, electronic computer Set priced below market. works,1 1/2" or 2" band, 22ft. track Item ID 12569. Sam x702 Cat 3406 140KW Genset, 12,400

hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage 30+

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

MorbarkNEW ..................................... 9

Corley Mfg .............................. 32

Auto Saw Tensioner Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Years

with onboard log turners, Strong! carriage drive, hyd pac for carriage,

From Price To 48" bottom saw and 36" top saw

Performance, We’re A Cord Above The Rest!

STACKING RAC

 Firewood Processors: 8 Models  Firewood Cleaners  Firewood Conveyors: 12’, 20’ & 30’  Operator’s Cabs Sawmill Exchange .................. 11  Firewood & Log Grapples  Free DVD

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23 319-986-5525 Local • 2756 Kentucky Ave, Mt Pleasant, IA www.BakerProducts.net WoodMizer ................................ l 800.S48.6914 I S73.663.7711

Lignomat ................................. 24

- USED FORESTRY EQUIPMENT FOR SALE

❘

Portable • DePenDable • low Maintenance

888-SPLITTER (888-775-4883)

 SELL YOUR EQUIPMENT l§ TODAY 100

blockbuster-inc.com

❘ WWW.TREETRADER.COM  24/7 SUPPORT ❘ L!  (888) 401-MENS NO. Largest 21 0 ~ The World’s W

Phone 315.284.4126 Fax 1998 VALMET 603 FELLER 2005 VALMET/TIMBCO 415 315.849.2045 HARVESTER WITH 370E HEAD BUNCHER W/18” WARATAH Website HOT SAW 15,400 hours. 370E Harvesti ng www.empirehyd.com Just over 10,000 hours. New 28L head“Precision just added 2010 and has Email UnderinPressure” info@empirehyd.com

Big Capacity Grapple! 9400 hours. Tires at 40%. Totally gone through by TP Dealer who did the following: Repacked and resealed hydraulic cylinders – grapple arch, steering; Replaced hydraulic hoses and lines where ‘16 Halverson H140etc; needed – fill pump, grapple, Repacked hydraulic fill pump; Skidsteer (DEMO) Replaced exhaust; Replaced Item ID: JW-909632 center pins; Straightened and Contact: J Williams painted panels; Changed Ph: (888) 401-6367 x701 all fluids and filters; Re-insulated cab; Checked and fixed wiring as needed.

Item ID 13438. Sam x702

2010 TIMBERPRO 725B W/ROLLY II PROCESSOR Super Clean Machine. Runs great. Has worked double shifts so it has higher hours at 13,500, but has been well ‘93 BarkoNew 180B maintained.

U/C last Item 24” ID: 14077 year. grousers. All pumps Contact: Austin rebuilt last year. Gull wing Ph: (888) 401-6367 engine cover with x703 hydraulic lift for easy maintenance.

Rolly II in good condition and computer measures well.

Owner retiring. Bought new for $540,000!

Item ID 13362. Sam x702

BELL’S FIREWOOD PROCESSORS

7000 hours. 36” Triple Grouser tracks rebuilt one year ago and are at 80%. Sisu engine that is very stingy on fuel. 8’ squirt at end of boom for 30’ reach. Reversible fan and auxiliary oil cooler. Still runs OK. Cutting today but will needs some basic updates soon.

Item ID 12266. Sam x702

x 26 tires - 20 ply. All oils just changed to synthetic oils. New fuel filter. New radiator fluid— flushed and replaced. New saw teeth on disc plus about 100 spare teeth. $15,000 in recent upgrades.

FOB: Canada. New sensors. New batteries. All hoses inspected and replaced as needed. New O-Ring seals in valves. Cummins 4BT3.9 • 67 HP MODCAT Diesel 2007 VALMET/KOMATSU has 130HP and plenty of power.

Engine EL 911 EXTREME HARVESTER Owner states that it cuts perfectly.

Only 4000 hours•on44” thisCircular special Saw Totally ready for work. Inspected 20”Max Diameter machine. Has new•Log 6000 and tested and woods ready.

2007 TIMBERPRO Capacity added in 2013. Individual tracks 810 COMBI MACHINE Item ID 13503. Sam x702 • this Single Joystick Forwarder set up but comes on each hub allow machine Control to climb where NO OTHER 1997 VALMET 890 FORWARDER with rebuilt Log Max 750 • 30 Ton Splitter MACHINE can go!

4 New 700 8-Wheeled Forwarder. 18,400 processing head. Less than 5200 Cylinder tires and rims come with it for hours. Hood guard. Runs well and total very Track well. Has ‘13 hours.

KMCRuns 2500 rubber tired operation. Recently well maintained. 20 ton capacity. blade and plumbed for a clam • 67 HP CAT Diesel Skidder gone through and updated. Tires at 40%. Includes removable bunk.

NewEngine swing gear box. Quick • 44” Circular Saw Very unique and hard to find a carry bin for biomass or wood waste. att ach in 1514078 min. to switch head to Item ID: • 20” Diameter 13428 Victory Ln. // PO Box 124 • 67 HP CATgrapple.

Diesel Cummins Capacity Item ID 13462. Sam x702 machine like this! Priced well Contact: Austin6.7 QSB engine.

• Single Joystick Engine Adams Center, 13606 below market.

Sold newNY without 260HP. Opti onal Tracks Ph: (888) 401-6367 x703on all TIMBERPRO • 44” Circular Control Saw • 30 $10,000.

Ton Splitter head in 2008 for $575,000! bogies adds • 20” Diameter 2005 TIMBERPRO 620 Cylinder Capacity Item ID 12571. Sam x702 Item ID 13501. Sam x702 BOGEY GRAPPLE SKIDDER

4000 SERIES

2006 TIMBERPRO 830 COMBI BELL’S FIREWOOD PROCESSOR HARVESTER/FORWARDER ‘95 John Deere C6 Just 5700 hours. Very good BELL’S FIREWOOD PROCESSORS Treeon.Farmer conditi Comes with grapple

for loading forwarder and Log Item ID: 13920 Max 7000 processing head for Contact: Austin harvesti ng. 401-6367 2 sets of x703 tracks Ph: (888) 4000 for SERIES bogies. Set up for quick change from harvester to grapple. One 4000 SERIES man operati on. Log Max head capacity!. Item ID 13421. Sam x702 has top saw and runs well.

Compare toBARKO new machine at 1994 Barko 160B - Electric $650,000. knuckleboom, 30' boom, 75hp Item ID 13439.

Sam x702

BELL’S FIREWOOD PROCESSO

BELL’S FIREWOOD PROCESSOR

Very good

BELL’S FIREWOOD PROCESSORS Many Models & • Single Joystick off onto a conveyor. This is a very Control running condition.

Options• to Choose From!

30 Ton Splitter well built processor.

Item ID 13820. motor, Rotobec continuous • 67 HP CAT Diesel 4000 SERIE Cylinder

BELL’S FIREWOOD PROCESS BELL’S FIREWOOD PROCESSORS BELL’S FIREWOOD PROCESSORS

Engine 67 HP CAT Diesel 4000 SERIES Sam•x702 grapple, 5,000 original hours.

• 44” Circular Engine Saw Many Models & • 44” Circular Saw • 20” Diameter Firewood Processor - This is (excellent condition.). Item ID • 20” Diameter Capacity Options to Choose From!

• 67 HP CAT Diesel 4000 SERIES a Chomper Model 16 PDA 13238. Chris x700 Capacity • Single Joystick FIREWOOD TUMBLER Engine • Single Joystick Control automatice firewood processor 1995 Barko 775 B Feller Buncher • 44” Circular • Saw Sturdy HSS Steel Welded Control • 30 Ton Splitter • 20” Diameter •John 30 TonDeere Splitter Many Models & JW-986495 FIREWOOD TUMBLER • 4’ Diameter Barrel with power unit with - Pumps recently redone. 400 hrs Cylinder Capacity Cylinder

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor

Item ID: • Sturdy HSS Steel Welded Contact: J Williams • 67Out HP CAT Diesel • Single Joystick 4000 SERIESpump.

Options Choose From!

• Clean Chute low hours.

Control panel to includes on injection always started • 4’ Diameter Barrel Engine Control Ph: (888) 401-6367 x701 • 67 HP CAT Diesel Out ChuteSERIES • 44” Circular Saw • Removes Debris & Bark as large as• Clean 2 ¼”4000 • 67 HP CAT Diesel • 30 Ton Splitter 4000 Cylinder

tach, pressure, • 20”oil Diameter Engine

water temp and

SER good. in goodDebris working order.

22inas 2 ¼” • Removes & Bark as large

Engine Capacity •• Works with Lift 44” Circular Saw all of our Double chain•Hydraulic Works with all of our conveyors Double chain Hydraulic ••Single Joystick amp gauges.

Cuts logs up to 16”. kohing head. head works great.

44” Circular Saw • 20” Diameter • Optional Honda Power Pack Available TUMBLER Control • Optional Honda PowerFIREWOOD Pack Available Capacity• 20” Diameter

• 30owner Ton Splitter and comes with • all Sturdy HSSItem SteelID Welded 13185. Sam x702 chain conveyer, 8 way splitter, on• SingleOne Joystick

Many Barrel Models • 4’ Diameter

Many Models && Options to Choose From!

Options Choose • Removesto Debris & BarkFrom! as1500 largehours. as 2 ¼” Item ID 13865. approximately Hour • 30 TonMany SplitterModels & • Works with all of our Double chain Hydraulic Lift conveyo Sam Cylinder x702 meter Power dont work.

The last 2 owners • Optional Honda Pack Available Options to Choose From!

Many Models & Cylinder Capacity

20,000lb goose neck trailer. Item IDControl manuals and receipts. Purchased Barko 160D - new engine with • Single Joystick • Clean Out 1999 Chute 13916. Austin x703

Best Value Portable Log Splitter

• 30 Ton Splitter Control Cylinder new for $32,500.

- Small manufacturer in PA has

made the best valued log splitter.

Handles logs up to 32”. Uses

LOGGING EQUIPMENT Options to Choose From!

BANDIT

FIREWOOD TUMBLER Made have only used it Into load trucks or

FIREWOOD Canada • Sturdy HSSTUMBLER Steel Welded

•• Sturdy HSSas Steel Welded 4’ Diameter Barrel as a backup needed.

Has a CTR Clean Out Chute •• 4’ Diameter Barrel

Many Models &•• Clean 1999 Bandit 1900 Tracked Disc grapple been rebuilt.

Removes Debris &has Bark as large as 2 ¼” • Sturdy HSS SteelTUMBLER Weldeddelimber, FIREWOOD Out Chute FIREWOOD TUMBLER

but electronic option is available.

• Sturdy HSS Steel Welded Works withDebris all of our Double chain In • 4’ Diameter Options toBarrel Choose From!

•• Removes & Bark asleaks. largeHydraulic as 2 ¼” L Chipper Made - Cat Under Carriage at Boom cylinders have minor • 4’ Diameter Optional Honda Power Pack Available Chute BarrelMany Canada• Clean Out Models •• Works with all&of our Double chain Hydrau Please Call for Details • Clean Out Chute • Removes DebrisDebris & Bark as large ¼” Sam x702 50% or better. 475 hp Cummins Item 13694.

• Removes & Bark large as 2as ¼” 2 Honda Made In ID •as Optional Power Pack Available

Richmond Expo Booth H9 adjustable to single two#H8 way.& Great

or visit us with online Well maintained. Item ID 13294. low at hours at 3,500. 5.9 • 4’ Diameter Barrel

13HP Honda motor. Manual start us at the Has Log Lift. UsesVisit 4-way wedge

Options to Choose From!

1-888-995-1965

• Works with allwith of all our Double chain Hydraulic Lift conveyors • Works of our Double chain Hydraulic Lift conveyors Canada

Diesel. 7500 Hours.

One •owner.

94 275 - Excellent value Optional Honda Power PackBarko Available FIREWOOD TUMBLER • Optional Honda Power Pack Available • Sturdy HSS Steel Welded

www.bellsmachining.com • Clean Out Chute CUMMINS continuous grapple.

FIREWOOD TUMBLER • RemovesAvailable Debris & Bark as large as 2 ¼” Financing • Works withRuns all • of Sturdy our Double chain Hydraulic Lift conveyors HSS Steel Welded Firewood Processor - This is a 2004 Bandit Beast Model 4680 Great!.

Item ID 13740.

Sam Made • Optional Honda Power PackInAvailable • 4’ Diameter Barrel Please Call for Details Please Call for Details Value! PA. Item ID 12062. Sam x702 homemade processor with a 10’

Sam x702

1-888-995-1965or visit us online log deck. Has a hydraulic grapple, chain and kicker that all runs off

Canada

x702 • Clean Out Chute 1-888-995-1965 • Removes Debris with 850 HP. 5300 hrs. Mill in BELL & Bark as large as 2 ¼ 3412 Caterpillar Diesel engine

Made In Canada

Made In Canada

good condition. Just finished 10

Made In Canada

• Works with all of our Double chain Hyd 1990 SuperHonda T - This Bell has • Bell Optional Power Pack Available

www.bellsmachining.com or visit us onlineAcre CallPlease for Details clearingPlease job, ready to work! a brand new Duetz engine. Lever Call for Details Financing Available 1-888-995-1965 inch insert tooth circle saw, 30 foot www.bellsmachining.com Remote control.

Big production control, 33” bar, pump and tranny unit. Has a 4’ chain saw that kicks 1-888-995-1965 Please Call fororDetails visit us onlineCall for Details Please or visit us online www.bellsmachining.com Financing  Issue 364 1986 ❘ 401 Lumbermens™  since  Available List  1-888-995-1965 seLL  exchange  buy  save ❘  LumbermensCO.com Financing Available - It has a 353 Detroit diesel, 40

of a 4 cylinder Mercedes power

Made In Canada

1-888-995-1965

www.bellsmachining.com or visit us onlineFinancing Available

or visit us online

PLANERS

2006 LOGOSOL PLANER This is a 10” 4 sided planer that has removable side cutters that will take up to 12” lumber and includes a blower system.

Item ID 13428.

Sam x702 The Tree POLE & POST PEELERS that Started PS8 POST PEELER it All! This peeler has been converted 1986, Lumbermens has toSince electricity over hydraulic. published a monthly circularcab, Comes with a operators reachingboxes, sawmills, loggers, and electric conveyor pallet makers, recyclers and kickers and will peel a 3” post to industrial woodworking plants a worldwide.

7” post. Comes with a barko loader mounted on a truck that PUBLISHER has also been converted to Woods Publishing electric power.

SALES ItemADVERTISING ID 13926. Sam x702 Morris Woods PORTABLE SAWMILL (888) 401-6367 ext. 704

36”morris@lumbermens.co PORTABLE SAWMILL Maximum diameter log- 36” MARKETING DIRECTOR Maximum John length of cut-20’6” Williams Powered a Koehler Diesel (888)by 401-6367 ext. 701 9.8HP Blade-1-1/4” by 13’2” j@lumbermens.co long 12DESIGN Volt saw-head precision DIRECTOR up/down.Donna Heninger Item ID 13897. Austin x703 EQUIPMENT REPS Sam Wall (888) 401-6367 ext. 702 Visitsam@lumbermens.co us at the

** CALENDAR**

36” PORTABLE SAWMILL 2 with extra unit never used.

Maximum diameter log-36” have 25hp NY STATEAlso WOODSMEN'S FIELDelectric DAYS Maximum length of cut-20’6” with Fri, 18 conversion August - Sun, 20switch Augustgear Powered by Koehler gas 19HP Boonville, excellent New condition York low hrs Blade 1-1/4” by 13’2”www.starwebhosting.net/woodsmen/ long new replacment 75-80k.

12 Volt saw-head precision Item ID 13564. Chris x700 up/down 12 Volt Electrical SOUTHWEST FOREST PRODUCTS EXPO Forward/Reverse Saw Head WOODMIZER LT 40 Fri, 25 August - Sat, 26 August Travel.

PORTABLE BANDSAW MILL Hot Springs, Arkansas Item ID 13899. Austin x703 Excellent condition. 20 ft w/ www.arkloggers.com 12’ bed extension, 18 HP B&S 72NDmotor, ANNUAL GREAT DIXON SAWMILL only 530 LAKES hrs, blade LOGGING & HEAVY EQUIPMENT VERY UNIQUE AND sharpening tool & settingEXPO jig.

7 Sept - Sat, 9Sam Septx702 EFFECTIVE MILL! Dixon 52Thurs,Item ID 13605. in bottom blade and 38 in top Escanaba, Michigan blade. It has a four blade vertical WOODMIZER LT70 FULLY LOGGING & BIOMASS edger diesel powered withMID-ATLANTIC a fuel HYDRAULIC 15 Sept - Sat, 16 Sept efficient duezt 247hp motor. Fri, With only 2000 hours this Selma, Carolinacondition, Item ID 13812. Sam x702 Mill isNorth in excellent www.midatlantic-logging-biomass­ both the mill, and the edger MID-ATLANTIC LOGGING & BIOMASS EXPOLT 40 haveexpo.com/ Caterpillar engines. The WOODMIZER LT 40 Hydraulic/Portable woodmizer has the 62 HP WOODhas EXPO and the edger a 26HP, it Comes w/15 Blades; some new. KENTUCKY Fri, 15 Sept Sat, 16 has the accuset 2Sept setworks, An excellent condition!

Lexington, Kentucky and the twin blade edger Item ID 13606. Sam x702 http://www.kfia.org/ which has 900 hours. There KentuckyWoodExpo.aspx WOODMIZER LT-70 are around 30 extra blades, comes with ext. & edger. that will come with the PAUL BUNYAN along SHOW with a 100 62 Hp cat remote stationTHEmachine, Fri, 6 Oct Sun, 8 Oct 4400hrs 12’ ext diesel edger gallon fuel tank.

Cambridge, OhioAustin x703 2500hrs trailer pkg accuset Item ID 13906. www.ohioforest.org

speed and 40K rears. New fifth wheel, power divider, BANDMILLS & HEADSAWS front rear end, engine wire Danckaert Band Resaw - Roughly harness, head gaskets, injec10 hours on this machine since it tor o-rings, front cover seal, has beentransmission rebuilt, it has a 24foot reman aboutin 2 feed deck 20 foot out feed deck years ago.

Item ID 13800. x702 with 44 inch wheels, Sam and all the bells and whistles, its a production

2001 BENSON END DUMP This is a very nice 34’ aluminum that up and with down, an withelectric airbags, end godump it includes two sets ofwheels Mcdonough tarp, aluminum and 24.5 tires.

Single point spring pressure guides.

Top Casting wheel suspension.

Has the small door is supported on both sides.

This in tailgate. is an extremely accurate machine Item ID 13818. Sam x702 in ve1y good SAWMILL condition, Cuts 130 machine, with air strain conveyers

feet a minute also has CLT presses.

‘00 HURDLE MODEL #2 Item ID 13876.

Austin x703 Block Circular Sawmill 2 Head S W 125 Band power Mill with w.&671 Detroit B32 minor edger setworks, Caterpillarcomputer generator - Low hours infeed deck and outfeed rollers, on the mill, electronic computer Set dust chain. works,1 1/2" or 2" band, 22ft. track Item ID 13825. Sam x702 Cat 3406 140KW Genset, 12,400

hours ready to run. Item ID 13434.

Sam x702

** INFO LINK**

Richmond Expo Austin Woods Booth #719

(888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

FOR CLASSIFIEDS Call 888.401.MENS ROLLING STOCK See pictures, prices, and 1998 PETERBILLT 378 Location of all equipment at Cummins 500hp N-14. Just over 1,000,000 miles, 10 www.LumberMB\ISmagazine.com

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE

❘

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘

 (888) 401-MENS L!

NO. 23

Sch Gri

Item Con Ph:

20 53

Item Con Ph:

Phone 315.284.4126 Fax ‘99 MEADOWS SAWMILL 1996 WOODMIZER 315.849.2045 Computer has been replaced, PORTABLE SAWMILL Website it comes with 5 extra blaeds, Mill model LT40HDD40. Hour www.empirehyd.com 4 extra Belts, 3 phase Air Email meter reads 4,393 hrs. 4 cyl; “Precision Under Pressure” info@empirehyd.com

Compressor and a saw sharpener. Mill is in Excellent condition! Reason for selling: Sawmill is too Big for what we need.

Item ID 13642. Chris x700

40 HP Lombardini engine; Complete rebuilt at 4,000 hours. Also has debarker and ride along seat. Mill in excellent working condition.

Item ID 13457. Sam x702

04’ WOODMIZER LT 70 HYDRAULIC Only 1100 hours on this mill, it has a Cat diesel turbo engine, laser sight, debarker, accuset 2 setworks, and extra blades to go with it. Also includes a Bearing roller table. Mill is in excellent condition.

Item ID 13940. Austin x703

2001’ FRICK TIMBER IGER SAWMILL Portable on single axle, 14’ carriage/all steel. 4 Head blocks with 3 tapers, manual setwork, and dogs. 48’ track broke into 3 sections. Miner 3 blade edger1 fixed blade/2 movable, will cut 4” thick cant. The edger is mounted over the mandrel. The mill and edger were designed 1984 LANE MODEL 8400 to be operated by the same SAW MILL person. Mill and edger run off of Heavy duty four 14’ (4) head a single 471 Detroit Power unit, table w/ a top saw. Silvatech the power unit has its own axle.

13428 Victory Ln. //foot PO Box Set works and has 45-50 of 124 Comes with Mellott Log turner, Adams Center, NY 13606 track frame. Surprisingly good 3 strand log deck, and a sawdust condition! Great Value at this conveyer under the saw. The price! mill is set up and in production.

Item ID 12689. Sam x702 Also available is a Case 580B

Loader with forks & Bucket, that can be included for 6K. Item ID 13914. Austin x703 2006 B1600 BREWCO GRADE RESAW This is a stationary band resaw ‘16 Halverson H140 system.

It includes infeed with hydraulic hold (DEMO) down, outfeed Skidsteer rollcase board separator Item ID:with JW-909632 system, lumber transfer, Contact: J Williams complete runaround system.

Ph: (888) 401-6367 x701 Mill is capable of cutting 16 X 16 X 18 cants. Has all new height and width detectors and new feed chain. Cuts with a 2” bandsaw and comes with approximately 25 extra bands. Comes with a 4 X 4 operators cab and controls.

Item ID 13862. Sam x702

‘05 Gehl CTL 70

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

Woodmaster ‘83 John Deere 4850

chain conveyer, 8 way splitter, on

Item ID:we 14073 See why are your BeSt Source for bandsaw blades!

20,000lb goose neck trailer. Item ID

Contact: Austin We(888) offer401-6367 the highest quality welds and our x703 people use the 13916.

Austin Ph: x703

highest level of integrity and precision toPortable give you the best Best Value Log Splitter bandsaw blades ingood the business—we ship all overinthe with 1700 hours, in very - Small manufacturer PAUS. has Satisfaction guaranteed! condition. Easily produces high always made the best valued log splitter. quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor

Handles logs up to 32”. Uses

13HP Honda motor. Manual start

thIn Kerf

but electronic option is available.

Band saw Blades

Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702

Ask About Our Dismanteling Blades homemade processor with a 10’ Firewood Processor - This is a

log deck. Has a hydraulic grapple, chain and kicker that all runs off

- It has a 353 Detroit diesel, 40 of a 4 cylinder Mercedes power k cinsert e h inch tooth circle saw, 30 foot unit. Has a 4’ chain sawPrice that kicks C ut Our Quality • Our Service • Our O

1-888-857-5153

 Issue 364 401

Lumbermens™  since 1986

❘

‘93 Barko 180B

Item ID: 14077 FRICK SAWMILL Contact: Austin Everything on the mill seems Ph:work (888)fi401-6367 x703teeth, to ne. Has belts, and blade with it. Power unit is 230 Cummins. All it needs is a starter and radiator.

Item ID 13904. Austin x703

2006 LT40 SAWMILL Remote 51hp 2500 Caterpillar engine ‘13 KMC Track with 7500 hours. Loader, Skidder debarker, with trailera package.

ItemID: ID14078 13664. Sam x702 Item Contact: Austin CLEEREMAN MODEL Ph: (888) 401-6367 x70340 3 knee - Right hand Includes track and controls. Electric over air setworks. offItem onto aIDconveyor. a very 13240. This Chrisis x700

FRICK SAWMILL WITH A 3 HEAD BLOCK CARRIAGE Sawmill operation for sale. The whole operation is electric ‘95 John Deere C6 powered. Frick Sawmill with a Farmer 3Tree head block carriage (has slide for a fourth), 54 inch head saw, Item ID: 13920 almost new (also have spare Contact: Austin saws), Mellot 3 strandx703 log deck, Ph: (888) 401-6367 log turner, and two saw 4 inch Minor edger. The edger has a 30 horsepower motor, the mill is capacity!. Item ID 13421. Sam x702 powered by a 150 horsepower motor. BothBARKO the mill and edger 1994 160Bchains.

- Electric haveBarko sawdust knuckleboom, 30' boom, 75hp Item ID 13607.

Chris x700

Sam x702

grapple, 5,000 original hours.

well built processor. Item ID 13820.

IntegrIty • PrecIsIon • QualIty • Value

FRICK SAWMILL 2000, Frick 48” blade, all metal, rails and bunk. 250 TURBO Cummins Engine. All in Great Shape!!

Item ID 13418. Sam x702

Firewood Processor - This is a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT Wood-Mizer LT40

BANDIT Item ID: 13995 1999 Bandit 1900 Tracked Disc Contact: Austin Ph: (888) x703at Chipper - Cat401-6367 Under Carriage 50% or better. 475 hp Cummins

Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

motor, Rotobec continuous

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185.

Sam Deere x702 84/85 John

1999 Barko 160D - new engine with

440B/C

approximately 1500 hours. Hour

Item ID: 13908 Contact: Sam have only used it to loadx702 trucks or Ph: (888) 401-6367

meter dont work. The last 2 owners as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

good condition. Just finished 10

1990 SuperSuper T - This Bell ‘90Bell Bell T has

Remote control. Big production

Contact: Sampump and tranny control, 33” bar,

Acre clearing job, ready to work!

‘89 Timberjack 380A

 List  seLL  exchange  buy  save

Item ID: 14039 Contact: Austin

aItem brandID: new13896 Duetz engine. Lever

Ph: (888) 401-6367 x702 ❘

 LumbermensCO.com

John Deere Dual Arch Grapple,

19 44

Item Con Ph:

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

SAFETY ALERT

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August

Logger Seriously Burned by Warming Fire Boonville, New York www.starwebhosting.net/woodsmen/

BACKGROUND SOUTHWEST FOREST PRODUCTS EXPO On a late fall day in the Pacific Northwest, a logging Fri, 25 August - Sat, 26 August The Treeby a warming fire during their lunch crew was standing Hot Springs, Arkansas break. that Started www.arkloggers.com it All!

BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck

72ND ANNUAL GREAT LAKES

PERSONAL CHARACTERISTICS Since 1986, Lumbermens has LOGGING & HEAVY EQUIPMENT EXPO It is unknown how much training or experience the crew had. published a monthly circular Thurs, 7 Sept - Sat, 9 Sept reaching sawmills, loggers, pallet makers, recyclers and UNSAFE ACTS AND CONDITIONS industrial woodworking plants worldwide.

Via skyline, the choker setter on the yard

with 44 inch wheels, and all the bells and whistles, its a production

Escanaba, Michigan

machine, with air strain conveyers that go up and down, with airbags,

LOGGING & BIOMASS sent the MID-ATLANTIC crew it includes two sets of Mcdonough Fri, 15 Sept - Sat, 16 Sept their lunches and milk jug filled with fuel for a warming fire PUBLISHER pressure guides. Top Casting wheel Selma, North Carolina Woodswas Publishing (the mixture 3/4 diesel, 1/4 gas). www.midatlantic-logging-biomass­ is supported on both sides. This MID-ATLANTIC ADVERTISING SALES The skyline was lowered to the ground andEXPO the landing expo.com/ LOGGING & BIOMASS is an extremely accurate machine Morris Woods crew (888) began moving the guy line. During this time, a fire was built, and the rigging crew huddled around fire toCuts stay130 in ve1y good the condition, 401-6367 ext. 704 KENTUCKY WOOD EXPO warm.

The fire began to die down and the choker setter decided to add some of the fuel mix tofeet thea fiminute re. also has CLT presses. morris@lumbermens.co Fri, 15 Sept - Sat, 16 Sept MARKETING DIRECTOR

Lexington, Kentucky

Item ID 13876. Austin x703

John Williams ACCIDENT http://www.kfia.org/ S & W 125 Band Mill with (888) 401-6367 ext. 701 KentuckyWoodExpo.aspx When the choker setter splashed the mixture onto the fi re, the fl ame from the fi re went back to the jug, and the Caterpillar generator - Low hours j@lumbermens.co remaining mixture exploded and shot onto the victim who was standing near the choker setter and the fi re.

The fuel on the mill, electronic computer Set DESIGN DIRECTOR THE PAUL BUNYAN SHOW mixture Donna covered the victim’s left arm, chest, left side of his neck, and part of his face.

Heninger works,1 1/2" or 2" band, 22ft. track Fri, 6 Oct - Sun, 8 Oct He EQUIPMENT immediately went to the ground and started rolling in an attempt to Ohio extinguish the flames.

The140KW rest ofGenset, the rigging Cat 3406 12,400 Cambridge, REPS Sam www.ohioforest.org crew jumped onWall the victim to extinguish the fire. During the process, the victim’s clothes werehours cut off him, andItem theID fire ready to run.

13434.

(888) 401-6367 ext. 702 was eventually extinguished.

The crew immediately called the landing and initiated the company’s emergency medical Sam x702 sam@lumbermens.co plan. The crew was approximately 800 feet from the landing, and the terrain was extremely steep and rocky. It&was CARRIAGES DRIVES Austin Woods decided to401-6367 use the ext. yarder of Cardinal the crew. reaching 2010 HDAfter Carriage (888) 703 to pull the stretcher with the victim to the landing, with the assistance austin@lumbermens.co the landing, Life Flight transported the victim to the hospital, where he was immediately transferred to(Sawmill) a regional burn Carriages - Cardinal ADDRESS center MAILING for further treatment.

Carriage line it includes carriage

** INFO LINK**

P.O. Box 1916 Columbia, TN 38402-1916 INJURY(888) 401-6367

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

with onboard log turners, carriage drive, hyd pac for carriage,

Menominee Saw .....................

29 ......................................

7 was TheAD victim sustained burns toBaker 25 percent of his body.5,He hospitalized for approximately six weeks. sawyers cab, computer controls, SUBMISSIONS May be sent to­ morris@lumbermens.co

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

STACKING RAC

RECOMMENDATIONS FORBrute CORRECTION carriage knees, husk including Force Mfg. ..................... 31 Midwest Sharpening.............. 26 • UsePOSTMASTER of accelerants to start fires is exceedingly dangerous. Accelerants should never be poured on tosaw fires started.

48" bottom andonce 36" top saw Buck Equipment (AIM) ........ 36 Morbark ..................................... 9 Send address changes to: •Lumberman's Employers must verify that all current and new employees have received adequate job safety instruction and training.

Exchange P.O. Box 1916 Columbia, TN 38402

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

BANDSAW

BLADES

Dyna

All Sizes Available!

TOP PERFORMING, economical blades for all primary &

secondary wood processing. Welded to your lengths!

Products ........................

35 Sawmill Exchange .................. 11 We also offer expert sharpening services, plus...

Gang • Edger • Scragg • TrimSawmill • Split • Strob Empire Hydraulics ...................

8 Select ......................... 19 ....and just about any Custom Saws you need

to keep longer...

Great Lakes Mfg. ....................

34you cutting Smith Sawmill ........................... 4 for less. Ask about FREE Shipping!

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23 www.BakerProducts.net 800.S48.6914 I S73.663.7711

Lignomat .................................

24 WoodMizer Call Marvin Miller for a quote ................................ l ©2019 Wood-Mizer LLC

- USED FORESTRY EQUIPMENT FOR SALE

❘

231-924-5953

(fax) 231-924-6166 / 11606 Brickyard Road • Holton, MI 49425

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

❘

 (888) 401-MENS L!

NO. 25

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

IN THE NEWS

Smith Expands To Increase East Coast Coverage “Precision Under Pressure”

Smith Sawmill Service expands to North Carolina

‘93 Barko 180B

Polkton, North Carolina (March 31, 2021) – Smith Sawmill Service dedicated to meeting needs of the wood ‘16isHalverson H140the ever-changing Item ID: 14077 Contact: Austin industry; providing services for sawmills, chip mills, pallet mills, paperSkidsteer mills, and plywood/OSB (DEMO) manufacturers. Smith Sawmill Service (888) 401-6367 x703 is announcing the acquisition of Precision Saw Works, Inc., located inItem Polkton, North Carolina: foundedPh: in 1986

by Frank Curran, they ID: JW-909632 Contact: J Williams have specialized in the repair and manufacturing of both band and circle saws, providing exemplary service to their customers for 35 Ph: (888) 401-6367 x701 years. This addition will enhance Smith Sawmill Service’s footprint on the East Coast, and with our existing infrastructure, will allow us to better serve our customers, both current and new, in that region and beyond.

Smith Sawmill Service will use Precision Saw Works' existing facility, including retention of current management and employees, to provide services for repairing & sharpening, as well as the manufacture of circle saws, bandsaws, and custom sawmill parts. Frank Curran, and his son Travis, will continue to act as managers and help lead this location. The goal is to achieve a seamless integration of both companies over the next three weeks, with no service interruption, and during that time “our customers continue to receive ‘95will John Deere C6 the same high-quality products and service that they have come to expect," stated Paul Smith, President of Smith Sawmill Service.

Tree Farmer Paul & Debra Smith laid the foundation for this family owned, family oriented, company in 1990, and have been providing quality Item ID: 13920 products and exemplary customer service for over 30 years. Smith Sawmill Service is an innovator of sawmill technology, Contact: Austin with multiple ‘13 KMC 2500 Track Ph: With (888) the 401-6367 industry- related patents, always striving to increase the efficiency and productivity of the wood industry. help ofx703 their son Skidder Michael Smith, and General Manager Dustin Norris, the company hasItem continued to grow and build upon the legacy of Paul and Debra ID: 14078 13428 Victory Ln. // PO Box 124 Smith. The addition of an East Coast location was a natural next-step Contact: in the evolution and under the Austinof this company, capacity!.

Item ID 13421. Sam x702 Adams Center, NY 13606 Ph: (888) 401-6367 x703 never forgetting the past, but with an stewardship of Michael and Dustin, Smith Sawmill Service will continue to remain cutting-edge; BARKO eye always on the future.

1994 Barko 160B - Electric Precision Saw Works, Inc. will be named Smith Sawmill Serviceoff - North and isisanow of Smith onto aCarolina, conveyor. This verya wholly-owned knuckleboom,subsidiary 30' boom, 75hp Sawmill Service. well built processor. Item ID 13820. motor, Rotobec continuous Sam x702

grapple, 5,000 original hours.

a Chomper Model 16 PDA

13238. Chris x700

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 401

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

‘05 Tigercat 230B 1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Item ID: 13911 Chipper - Cat Under Carriage at Contact: Austin Ph: (888) 401-6367 x703

Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

good condition. Just finished 10

‘99 Hydro-Ax 511EX

Acre clearing job, ready to work!

Remote control. Big production

Item ID: 13799  List  seLL  exchange  buy  save Contact: Sam Ph: (888) 401-6367 x702

(excellent condition.). Item ID 1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

‘97 Prentice 210E

delimber, grapple has been rebuilt.

Item# 13795

Boom cylinders Contact: Samhave minor leaks.

Item 13694.

Sam x702x702 Ph: ID (888) 401-6367

94 Barko 275 - Excellent value 2006 Planer This is with Logosol low at hours at -3,500.

5.9a 10” 4CUMMINS sided planer that has removable continuous grapple. side will upSam to Runscutters Great!.that Item ID take 13740.

12” x702lumber and includes a blower system. Item IDBELL 13428. Sam x702

POLESuper & POST PEELERS 1990 Bell T - This Bell has PS8 Post Peeler This peelerLever has a brand new Duetz engine. been converted to electricity over control, 33” bar, pump and tranny hydraulic. Comes with a operators

cab, boxes, conveyor and ❘ electric  LumbermensCO.com kickers and will peel a 3” post to a

** CALENDAR** IN THE NEWS

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August

Southern Forest Products Association names Executive Director SOUTHWEST FOREST PRODUCTS EXPO Boonville, New York www.starwebhosting.net/woodsmen/

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com BANDMILLS & HEADSAWS

Danckaert Band SFPA Resaw -Chairman Roughly The Southern Forest Products Association (SFPA) BoardFri, of 25him on this well-deserved stated August - Sat, 26 August promotion,” The Tree 10 hours on thisatmachine since it Springs, Arkansas Directors has appointed Eric Gee to serve as Executive Director. Hot Craig Forbes after making the announcement a recent Board that Started www.arkloggers.com has been rebuilt, it has a 24foot in Eric succeeds Tami Kessler, who retired after a 44-year career with of Directors meeting. “Knowing what he does about our daily it All! deck 20Eric footis out feedprepared deck the association. the LAKES forest productsfeed industry, well 72NDoperations ANNUAL and GREAT with 44 inch wheels, all the Eric began his wood has industry career in Jackson, Mississippi the future progress association,” he and added.

Since 1986, Lumbermens LOGGINGto& manage HEAVY EQUIPMENT EXPOof our published monthly circular& Company where he worked as Thurs, 7“Working Sept - Sat, 9 Sept and whistles, its a production with Jamesa M. Vardaman a with SFPA’s staff ofbells dedicated professionals, I am reaching sawmills, loggers, Escanaba, Michigan machine, with air strain conveyers consulting forester.

He joined SFPA in 1997, serving in multiple looking forward to continuing to serve all SFPA members and pallet makers, recyclers and go up and down, with airbags, industrial woodworking plants capacities including marketing, government and environmental further enhance the value of theirthat membership,” Eric said.

He MID-ATLANTIC LOGGING & BIOMASS worldwide. it includes ext. two sets ofby Mcdonough aff airs, and director of SFPA’s Forest Products Machinery &Fri, may be reached by phone at 504-443-4464 3, or e-mail to 15 Sept - Sat, 16 Sept pressure guides.

Top Casting wheel EquipmentPUBLISHER Exposition. For the past two years, Eric has served the Selma, egee@sfpa.org.

North Carolina Woods Publishing www.midatlantic-logging-biomass­ is supported on both sides. This association as Deputy Director.

MID-ATLANTIC ADVERTISING SALES expo.com/ LOGGING & BIOMASS EXPO is an extremely accurate machine Eric graduated from Auburn University with a B.S. in Morris Woods in ve1y good condition, Cuts 130 Forest(888) Resources and to contribute to his alma mater KENTUCKY 401-6367 ext.continues 704 Every Wide Band WOOD Reputable EXPO morris@lumbermens.co feet a minute also has CLT presses. as a member of Auburn’s School of Forestry & Wildlife SciencesFri, 15 Sept - Sat, 16 Sept Supplier Offers MARKETING Item ID 13876. Austin x703 Advisory Council.DIRECTOR He is a Society of American Foresters Certified Lexington, Kentucky 3 High Quality Swedish Steel John Williams Forester, Alabama Registered Forester, and Certified Exposition http://www.kfia.org/ S & W 125 Band Mill with (888) 401-6367 ext. 701 3 3” – 8” Band Width Caterpillar generator Visit us at the hours Manager.

Eric resides in Covington, Louisiana with his wife,KentuckyWoodExpo.aspx - Low j@lumbermens.co Richmond Expo 3 16 to 20 Gage Lauren DESIGN and twoDIRECTOR daughters. on the mill, electronic computer Set Booth #712 THE PAUL BUNYAN SHOW 3 Double Cut Options Heninger “EricDonna brings a comprehensive set of skills set to the Fri, 6 Oct - Sun, 8 Oct works,1 1/2" or 2" band, 22ft. track ‘06 Brewco B1600 3 Choice Stellite management of SFPA operations and the Board congratulates 3406 140KW Genset, 12,400 Cambridge, Ohio of Swage orCat EQUIPMENT REPS

Resaw

Sam Wall (888) ext. 702 Item401-6367 ID: 13862 sam@lumbermens.co

Contact: Sam

www.ohioforest.org

** INFO LINK**

Austin Woods When You Buy Yourx702 Circular Saws From B.H. Payne Ph: (888) 401-6367 ‘05 Woodmizer (888) 401-6367 ext. 703 You’ve Bought the best... We Guarantee It! austin@lumbermens.co

LT300

MAILING ADDRESS Item ID: 14031 TraditionalBQuality Combined & B Mfg. ............................... 18 P.O. Box 1916 Contact: Austin With Todays Technology Columbia, TN 38402-1916 Ph:Payne (888)..............................

401-6367 x703 16 B. H. Quality Brand (888) 401-6367

Reg. U.S. Pat Off

Call 800 752-0627

Baker ...................................... 5, 7 Circular Saws AD SUBMISSIONS Make Sure To Ask For Our Free, Complete Saw Catalog Saw Bits and Shanks May be sent to­ Bell's Machining ..................... 27 Circular Knives We Manufacture & Sell Inserted Tooth Headsaws, Solid Tooth morris@lumbermens.co Carbide Tipped Saws Brute Force Mfg. ..................... 31 Carbide Strobe ® Saws Saws, Inserted Tooth Cutoff Saws & Carbide Saws. We also POSTMASTER B.H. Payne & Company Stock & Sell Bits & Shanks, Carbide Tips, Diamond Wheels, Buck Equipment (AIM) ........ 36 Send address changes to: Saw Manufacturers Knife Grinding Wheels, Saw Gumming Wheels & Knives.

John Deere 548G2 Lumberman's Exchange

Corley Mfg .............................. 32 ItemP.O. ID: Box 14042 1916 Here’s What You Get With Every B.H. Payne Saw Contact: Austin Columbia, TN 38402 CRD Metalworks .................... 25 • Saws from only the Highest ‘14 Quality Nickel Alloy Steel.

Ph:manufactured (888) 401-6367 x703 B66TD The Lumberman's is CW Mill-ArmorHog • Each Saw MilledExchange with State-Of-The-Art Precision CNC Milling ..............

Machine.17 published monthly Woods Rotochopper • We Tension Yourby Saw to Your RPM Speed BEFORE Leaving Our Factory.

CW Mill-Hogzilla ................... 15 - 3410 hours. $32,000 Publishing, P.O. Box 1916, in recent • Your Satisfaction Completely Guaranteed.

Columbia, TN 38402. All rights Item ID: 13838 upgrades and repairs. Fecon

Dyna Products ........................ 35

reserved. All editorial/ advertorial Contact: Sam BH250 Mulching submissions are used atHead. the Item ID Empire ...................

(888)Hydraulics 401-6367 Ext. 603 8 discretion of the publisher and may 13502. Sam x702 be edited for purposes of clarity P.O. Box 90608 Great Lakes Mfg. .................... 34 620D - This have is a and 2011 space.Tigercat Although all efforts East Point, GA 30364 Hahn ......................

3 beenlow made to ensure accuracy of 5500 Item Machinery ID 13408. Sam x702 hour skidder with only 404 761-8711 content submitted by advertisers Hurst Boiler .............................

14 2014 Tigercat 630D Grapple hours a cummins engine and and writers, the Lumberman's Fax 404on 761-5398 Exchange, its principlessystem. and Skidder - Dual Arch Grapple. Just a fire suppression Comes Iron Bull ...................................

Visit us at the 21 associates, are not held liable for Richmond Expo 1990 hours.

3 year/5000 hour PT mounted on 35.5 tires at 50% back “Since 1890” Reproduction, errors or omissions.

Kilgore Saw .............................

Booth #427 & 429 22 in whole or part, is prohibited with­ on warranty. 35.5 tires with dualing and 40% front and good chains Lignomat ................................. 24 out written consent.

60%. Wide blade. Winch. all 4 tires.

Has the bigger 630 axles Webrings E-mail: info@paynesaws.com Site:atwww.paynesaws.com ©2017 Woods Publishing

B.H. Payne & Company, Inc.

WOLVERINE

hours ready to run. Item ID 13434.

BUT ONLY THE Sam x702 & DRIVES

BY MENOMINEE SAW CARRIAGES GUARANTEES 2010 Cardinal HD Carriage

• Cutting Edge Plasma Welds Carriages (Sawmill) - Cardinal • The Industry’s HighestCarriage Band line Saw Capacity it includes carriage M&F Gauge ............................. 28 withHUGE onboardInventory log turners, carriage • Quick Delivery from our Meadows Mill, Inc. ................ 33 drive, hyd pac for carriage, 14’ Snow Pusher • Fast Sharpening & Exchange Program Menominee Saw ..................... 29 Item ID: JW-492406 sawyers cab, computer controls, to Keep YOU Running Contact: J Williams ‘11 Doosan DL200 cabinet with electronic drives for Metal Detector's Inc. .............. 30 Item•ID: JW-113876 Ph: (888) 401-6367 x701 Competitive Pricing carriage knees, husk including J Williams Contact: Midwest Sharpening .............. 26

Ph: (888) 401-6367 x701

48" bottom and 36" top saw Gives Yousaw Everything You need in a12Wide Band Saw – Plus Multitek ...................................

Expert Service from the Industry’s Most Piper's Saw Shop.................... 13 Knowledgeable Staff.

And ONLY Menominee Morbark .....................................

9

Rotochopper............................ 40

Got a Wide Row Electric ............................

20

STACKING RAC

Band Problem?

Call Menominee Saw Today and You’ll Sawmill Exchange .................. 11 ‘04Trust Fabtek 344B Learn Why More Mills the Pro!

Select Sawmill ......................... 19

‘05 Transport Trailers Custom The Paul Bunyan Show ......... 39 Log Pup

Item ID: JW-093430 Contact: J Williams Ph: (888) 401-6367 x701

TOLL FREE 1-800-582-0470 Thomas Industrial Controls..... 10

Smith Sawmill ........................... 4

Item ID: JW-538174 Processor - This is a Chomper 900&16th Union GroveJ Saw Knife..St., 2, 37Menominee, MI 49858 Contact: Williams super with a 60hp engine. In Tel: 906-863-2609 Fax: 14, 906-863-1147 Ph: (888)Refiner 401-6367 x701 23 Universal ................... very nice shape. Only 171 hours,

Email: info@menomineesaw.com

comes with green chain conveyer.

WWW.MENOMINEESAW.COM 800.S48.6914 I S73.663.7711 All of the manuals for the engine,

WoodMizer ................................ l Waratah 624 Super - New

and no winch. Center pins are tight Item ID 13526. Sam x702 Computer for❘ head (Logrite).

FORESTRY FOR SALE  SELL EQUIPMENT grapple 24/7 SUPPORT - USED EQUIPMENT l§ TODAY 0 roatation on the w/ a 2015 ❘ Tigercat 234BYOUR Loader - Model and extra fuel tank.

Item ID 13929.

10500 hours. New main pump 30’ reach on the boom. Joystick 234B. Only 300 hours on this Sam x702

www.BakerProducts.net

chopper itself come with ❘and the 401-MENS L! (888) 2006 Tigercat 630C GrappleNO. 27 it, as well as all of the electrical Skidder - Very good running

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

‘95 John Deere C6 Tree Farmer 2006 John Deere 648G III Item ID: 100008

1994 Timberjack 450C Item ID: 100009

2016 John2500 Deere 437E ‘13 KMC Track Item ID: 100007 Skidder

Contact: JOE Email: ItemJoe@lumbermensco.com ID: 14078 Phone: 888-401-6367 EXT 709 Contact:OR Austin 801-362-2170

Contact: JOE Contact: JOE Email: Joe@lumbermensco.com Email: Joe@lumbermensco.com 13428 Victory EXT Ln. // Phone: 888-401-6367 709PO Box 124 Phone: 888-401-6367 EXT 709 OR 801-362-2170 OR 801-362-2170 Adams Center, NY 13606

Ph: (888) 401-6367 x703

off onto a conveyor. This is a very

H O T

B U Y S

well built processor. Item ID 13820.

Sam x702

John Deere 540B

‘05

Item ID: 99986

Item CTL ID: 99984 Gehl 70

Ph: (888) 401-6367 x701

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703

2016 Barko Tree Chipper

with 1700Item hours, very good ID:in16688

condition. Easily produces high Contact: AUSTIN Email: qualityAustin@lumbermensco.com chips with patented ‘Cone’ Phone: 888-401-6367 EXT 703 drum design.

Can easily load 42’ 931-797-8029 vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD Timbco PROCESSORS 425EXL

Item 99998 2010 Shop BuiltID: Wood Processor

 Issue 364 401

Komatsu 931.1

a Chomper Model PDA Item ID: 16 99949

Contact: WALKER Item ID: JW-986495 Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 Contact: J Williams OR 931-797-3915

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 OR 931-797-3915

Contact: - It has aWALKER 353 Detroit diesel, 40 Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 inch insert tooth circle saw, 30 OR 931-797-3915

Firewood Processor - This is

Tigercat 620E

foot

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best'07 ValueMorbark Portable Log3800 Splitter

Horizontal Grinder

- Small manufacturer in PA has Item ID: 84439 made the best valued log splitter.

Contact: AUSTIN Handles logs up to 32”. Uses Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 13HP Honda motor. Manual start 931-797-8029 but electronic option is available.

Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has23 a hydraulic grapple, Morbark disc chipper ID:that 99944 chain andItem kicker all runs off Contact: WALKERMercedes power of a 4 cylinder Email: Walker@lumbermensco.com Phone: 888-401-6367 707 unit.

Has a 4’ chainEXT saw that OR 931-797-3915

Lumbermens™  since 1986

❘

kicks

automatice firewood processor Contact: AUSTIN Email: Austin@lumbermensco.com with John Deere power unit with Phone: 888-401-6367 EXT 703 low hours.

Control panel includes 931-797-8029 tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam '09x702 Mack

Truck & Trailer LOGGING EQUIPMENT Item ID: 74618 BANDIT

Contact: AUSTIN Email: Austin@lumbermensco.com 1999 Bandit 1900 Tracked Disc Phone: 888-401-6367 EXT 703 Chipper -931-797-8029 Cat Under Carriage at

50% or better. 475 hp Cummins

Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine

with 850 HP. 5300 hrs. 648H Mill in John Deere Item ID: 100006 good condition.

Just finished 10

Contact: WALKER Acre clearing job, ready to work!

Email: Walker@lumbermensco.com Phone: 888-401-6367 707 Remote control.

BigEXT production OR 931-797-3915

 List  seLL  exchange  buy  save

Item ID: 13920 Contact: HuskyAustin Brute XL 235 Ph: (888) 401-6367 x703 Item ID: 100004 Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 931-797-3915 capacity!.OR Item ID 13421. Sam

BARKO

x702

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID

Timberjack 450C 13238. Chris x700 Item ID: 99988 1995 Barko 775 B Feller Buncher Contact: WALKER

- Email: Pumps recently redone. 400 hrs Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 on injection pump. always OR 931-797-3915

started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners

1995 T or have only usedBell it to ultra load trucks Item ID: 100003 as a backup as needed.

Has a CTR

Contact: WALKER delimber, grapple has been rebuilt.

Email: Walker@lumbermensco.com Phone: 888-401-WT 707 Boom cylinders have minor leaks.

OR 931-797-3915

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL Sawmill Morgan Band

1990 Bell Item SuperID: T - 100005 This Bell has

Contact: WALKER aEmail: brand new Duetz engine. Lever Walker@lumbermensco.com

Phone: 888-401-6367 EXT 707 control, 33” bar, pump and tranny OR 931-797-3915

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM Call 888.401.MENS NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

John Deere 700H Forestry Dozer The Item ID:Tree 99930 that Started Contact: SAM it All! Email: Sam@lumbermensco.com

Phone: 888-401-6367 EXT 702 Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

Woods Publishing

ADVERTISING 360C SALES Timberjack

Item ID:Woods 89706 Morris (888) 401-6367 ext. 704 Contact: AUSTIN Email:morris@lumbermens.co Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

931-797-8029 MARKETING DIRECTOR

Item ID: 54867

Item ID: 99992

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

OR 931-797-3915

Hot Springs, Arkansas www.arkloggers.com Contact: AUSTIN

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029 72ND ANNUAL GREAT LAKES

LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Selma, North Carolina www.midatlantic-logging-biomass­ MID-ATLANTIC 12’ John Deere 848H John Deere 210G expo.com/ LOGGING & BIOMASS EXPO Item ID: 99983

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

OR 931-797-3915

Donna Heninger

Item ID: 43950 (888) 401-6367 ext. 703

Contact: SAM austin@lumbermens.co Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

Send address changes to: 2013 John Deere 753J Lumberman's Exchange

Item ID: 99902 P.O. Box 1916 Contact:Columbia, AUSTIN TN 38402 Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 Exchange is The Lumberman's OR 931-797-8029

published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers 97’ JohntheDeere 548G2 and writers, Lumberman's Item ID: 99972 Exchange, its principles and associates, are not held liable for Contact: AUSTIN errorsAustin@lumbermensco.com or omissions. Reproduction, Email: in whole or part, is prohibited Phone: 888-401-6367 EXT 703 with­ out written 931-797-8029 consent. ©2017 Woods Publishing

931-797-8029 Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Delimber Austin Woods

KENTUCKY WOOD EXPO Contact: AUSTIN Email: Austin@lumbermensco.com Fri, 15 Sept Sat, 16 Sept Phone: 888-401-6367 EXT 703

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Sam Wall (888) 401-6367 ext. 702 Komatsu PC270LC sam@lumbermens.co

Item ID: 99963

2012 Eco Log 590D

2012 Tigercat 250C

** INFO LINK** Item ID: 99996

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

931-797-8029

BANDMILLS & HEADSAWS Danckaert Band Resaw648L - Roughly John Deere Item 99993since it 10 hours on thisID: machine Contact: has beenWALKER rebuilt, it has a 24foot in Email: Walker@lumbermensco.com

Phone: 888-401-6367 EXTfeed 707 deck feed deck 20 foot out

bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This

Timberpro 745C

is an extremely accurate machine Item ID: 99938 in ve1y good condition, Cuts 130 Contact: AUSTIN

Email: Austin@lumbermensco.com feet a minute also has CLT presses.

Phone: 888-401-6367 EXT 703

931-797-8029 Item ID 13876.

Austin x703

S & W 125 Band Mill with Caterpillar generator - Low hours

on the mill, electronic computer Set

works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

John Deere 748G3

CARRIAGES & DRIVES Item ID: 99990

Item ID: 99966

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

931-797-8029

OR 931-797-3915

with 44 inch wheels, and all the

2010 Cardinal HD Carriage Contact: WALKER Email: Walker@lumbermensco.com

Carriages (Sawmill)EXT - Cardinal Phone: 888-401-6367 707

OR 931-797-3915

Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Buck Equipment (AIM) ........ 36

2016 Cat 563C

Morbark ..................................... 9

Corley Mfg 32 Item..............................

ID: 99970

Multitek ...................................

12 Item ID: 99962

Contact: AUSTIN CRD Metalworks .................... 25 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 CW Mill-ArmorHog 931-797-8029 .............. 17

Contact: AUSTIN Piper's Saw Shop.................... 13

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Rotochopper ............................ 40

931-797-8029

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler .............................

Komatsu 233 barsaw 14

Thomas Industrial Controls ..... 10 John Deere 648G3

Valmet 430FXL with

Timbco 425B

Item ID: 99908 Iron Bull ...................................

21

Item ID:& 99987 Union Grove Saw Knife.. 2, 37

Contact: SAM............................. 22 Kilgore Saw Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 24 Lignomat .................................

Contact: WALKER Universal Refiner ................... 23 Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

OR 931-797-3915 WoodMizer ................................ l

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

L O G G I N G

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

SOUTHWEST FOREST PRODUCTS EXPO

JD 648G- Grapple Skidder John Deere 648G3 Fri, 25 August Sat, 26 August

See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

2004 Timbco 425 EXL Item ID: 99855

STACKING RAC

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

OR 931-797-8029

1998 John Deere 548G Grapple skidder Item ID: 99921

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 www.BakerProducts.net OR 931-797-3915

800.S48.6914 I S73.663.7711

❘ L!  (888) 401-MENS 401-MENS

NO. 29

Phone

315.284.4126 TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

“Precision Under Pressure”

Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

07’ Tigercat 724E

John Deere 850K LGP

Item ID: 14218

Item ID: 99814

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

John Deere 540G2 Cable Skidder Item ID: 53891

L O G G I N G

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

‘02 Jackson Shavings Mill Item ID: 13736

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

‘16 Halverson 2011 John DeereH140 648H Item ID:(DEMO) 14217 Skidsteer

Contact: Item ID:AUSTIN JW-909632 Email: Austin@lumbermensco.com Contact: J Williams EXT 703 Phone: 888-401-6367 931-797-8029 Ph: (888) 401-6367 x701

2004 Timbco 445EXL Item ID: 14170

‘13 KMC 2500 Track Skidder

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

2016 Tigercat 604 E Cable Skidder

532 CAT Feller Buncher

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Item ID:55393

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703

16’ CAT 545D

Item ID: 14079

‘05 Gehl CTL 70

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

in excellent condition. Runs great.

Prentice Item 93’ ID 13644.

Sam x702210 Item ID: 14216

FIREWOOD PROCESSORS

Contact: AUSTIN 2010 Shop Built Wood Processor Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 - It has a931-797-8029 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

 Issue 364 401

amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased

Item ID:Item 13920 ID: 3674 Contact: Austin Contact: SAM Ph: (888) 401-6367 x703 Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

07’5,000 Tigercat 620C grapple, original hours.

Item ID: 14248 (excellent condition.). Item ID Contact: AUSTIN 13238. x700 Email:Chris Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 1995 Barko 775 B Feller Buncher 931-797-8029 - Pumps recently redone. 400 hrs on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with

Contact: SAMBANDIT Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 1999 Bandit 1900 Tracked Disc

have only used it to load trucks or Contact: AUSTIN Austin@lumbermensco.com asEmail: a backup as needed. Has a CTR Phone: 888-401-6367 EXT 703 delimber, 931-797-8029 grapple has been rebuilt.

50% or better. 475 hp Cummins

Item ID 13694. Sam x702

but electronic option is available.

EDGERS & GANGS

tach, oil pressure, water temp and

‘95 John Deere C6 John Deere 700K LGP Tree Farmer Dozer

-Contact: Small manufacturer AUSTIN in PA has Email:the Austin@lumbermensco.com made best valued log splitter.

Phone: 888-401-6367 EXT 703 Handles 931-797-8029 logs up to 32”. Uses

vans and produce 6 - 8 loads per

Brewco Saws - Two Brewco Saws

low hours. Control panel includes

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

new for $32,500.

Item ID 13865.

John Deere 437E

Best Value Portable Log Splitter Item ID: 14210

day. Item ID 13882. Austin x703

Timbco 820D Sam x702 Item ID: 18370 Firewood Processor - This is AUSTIN aContact: Chomper Model 16 PDA Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 automatice firewood processor 931-797-8029 with John Deere power unit with

Item ‘04 ID: 14077 Fabtek 344B Contact: ItemAustin ID: JW-093430 Ph: (888) 401-6367 x703

10’ John Deere 648H

Item ID: 14211 with 1700 hours, in very good Contact: AUSTIN Email: Austin@lumbermensco.com condition.

Easily produces high Phone: 888-401-6367 EXT 703 931-797-8029 quality chips with patented ‘Cone’

drum design. Can easily load 42’

well built processor. Item ID 13820.

‘93 Barko 180B

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’ 12’ John Deere 437D Item ID: 14209 log deck. Has a hydraulic grapple,

Contact: AUSTIN chain and kicker that all runs off Email: Austin@lumbermensco.com of a 4 cylinder MercedesEXT power Phone: 888-401-6367 703 931-797-8029 unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Sam x702 Knuckleboom Loader Item ID: 63181 LOGGING EQUIPMENT

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine JD 643G Item ID: 80565 with 850 HP. 5300 hrs.

Mill in

Contact: JOE good condition.

Just finished 10 Email: Joe@lumbermensco.com

Acre clearing job, ready work!

Phone: 888-401-6367 EXTto709 OR 801-362-2170

Remote control. Big production

 List  seLL  exchange  buy  save

approximately 1500 hours. Hour

12’ John Deere 843K

meter dontItem work. last 2 owners ID:The 14212

Boom cylinders have minor leaks.

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702John

Deere 650H LGP Forestry Dozer ItemBELL ID: 99810

1990 Bell Super T - This Bell has Contact: SAM

a Email: brandSam@lumbermensco.com new Duetz engine. Lever Phone: 888-401-6367 EXT 702

control, 33” bar, pump and tranny ❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

Timberjack 380 The Tree Item ID: 99926 that Started Contact: SAM it All! Email: Sam@lumbermensco.com

Phone: 888-401-6367 EXT 702 Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

Woods Publishing

Caterpillar ADVERTISING SALES Item ID: 2476

Morris Woods (888)SAM 401-6367 ext. 704 Contact: morris@lumbermens.co Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

MARKETING DIRECTOR

Item ID: 27398

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

Send address changes to: ‘14 CAT 535C Lumberman's Exchange Item ID: 13840 P.O. Box 1916 Contact: SAM TN 38402 Columbia, Email: Sam@lumbermensco.com The Lumberman's Exchange Phone: 888-401-6367 EXTis702

published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers Risley Rolly 2 and writers, the Lumberman's ID: 1993 Exchange,Item its principles and associates, are not held liable for Contact: SAM errors or omissions. Reproduction, Email: Sam@lumbermensco.com in whole888-401-6367 or part, is prohibited with­ Phone: EXT 702 out written consent. ©2017 Woods Publishing

Contact: SAM

Email: Sam@lumbermensco.com feed deck 20 footEXT out Phone: 888-401-6367 702feed deck

with 44 inch wheels, and all the

LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

bells and whistles, its a production

Escanaba, Michigan

machine, with air strain conveyers that go up and down, with airbags,

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

it includes two sets of Mcdonough pressure guides. Top Casting wheel

Selma, North Carolina www.midatlantic-logging-biomass­ MID-ATLANTIC expo.com/ LOGGING BIOMASS EXPOTC Skidder 2010 John& Deere 648H Cat 518 Grapple Skidder Item ID: 57023

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

is supported on both sides. This

Tigercat 724E Feller Buncher

is an extremely accurate machine

Item ID: 74169

in ve1y good condition, Cuts 130 Item ID: 99815

KENTUCKY WOOD EXPO Contact: SAM Fri, 15 Sept - Sat, 16 Sept Email: Sam@lumbermensco.com

feet a minute also has CLT presses.

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Lexington, Kentucky EXT 702 Phone: 888-401-6367 http://www.kfia.org/ KentuckyWoodExpo.aspx

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours

on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

Donna Heninger

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

Grapple Skidder 10 hours on this machine since it Item ID: 78104 has been rebuilt, it has a 24foot in

Contact: SAM Email: Sam@lumbermensco.com 72NDPhone: ANNUAL GREAT LAKES 888-401-6367 EXT 702

works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

MAILING ADDRESS

Danckaert Resaw - Roughly JohnBand Deere 548G2

Hot Springs, Arkansas Item ID: 99931 www.arkloggers.com

DESIGN DIRECTOR Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co ‘11 Tigercat 620D Item ID: 13929 Austin Woods (888)SAM 401-6367 ext. 703 Contact: austin@lumbermens.co Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August Timberjack 430 PARTS

CAT 559C

Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

SamCat x702322CL

Processor Logmax CARRIAGES7000XT & DRIVES

John Deere 3754D

** INFO LINK** Item ID: 269

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 801-362-2170

Item ID: 45747

Item ID: 78834 2010 Cardinal HD Carriage

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Contact: SAM

Email: Sam@lumbermensco.com Carriages (Sawmill) - Cardinal Phone: 888-401-6367 EXT 702

Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Buck Equipment (AIM) ........ 36 Bandit 1850 Track Chipper

Mor bark .....................................

Prentice 210E Loader9 Item ID: 79682 Multitek ................................... 12

Contact: AUSTIN CRDAustin@lumbermensco.com Metalworks .................... 25 Email: Phone: 888-401-6367 EXT 703 OR 931-797-8029.............. 17 CW Mill-ArmorHog

Contact: AUSTIN Piper's Saw Shop.................... 13 Email: Austin@lumbermensco.com

Rotochopper 40 OR............................

931-797-8029

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Feller Boiler .............................

14 Buncher

Thomas Industrial Controls ..... 10 Timbco 445EXL Hotsaw

Item..............................

ID: 99904 Corley Mfg 32

Item ID: 78672 Iron Bull ...................................

21

Contact: KilgoreAUSTIN Saw ............................. 22 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Lignomat 24 OR.................................

931-797-8029

- USED FORESTRY EQUIPMENT FOR SALE

❘

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw 384 and 36" top saw Prentice Knuckle

Boom & Delimber

STACKING RAC Item ID: 49732

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Phone: 888-401-6367 EXT 703

'96 CAT 515 Log Skidder Item ID: 7534

Feller Buncher Union Grove Saw & Knife.. 2, 37 Item ID: 47200 Universal Refiner ................... 23 Contact: SAM

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 www.BakerProducts.net 800.S48.6914 I S73.663.7711

Email: Sam@lumbermensco.com

WoodMizer ................................ l Phone: 888-401-6367 EXT 702

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

L O G G I N G

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Prentice 2384

❘

 (888) 401-MENS L!

NO. 31

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM 315.284.4126 Phone

“Precision Under Pressure”

Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

Cat D6T XW Dozer Item ID: 27832

'09 John Deere 753J Buncher Item ID: 14106

08’ John Deere 437C

‘16 Halverson $46,500 H140 Item ID:(DEMO) 53095 Skidsteer

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Contact: Item ID:AUSTIN JW-909632 Email: Austin@lumbermensco.com Contact: J Williams EXT 703 Phone: 888-401-6367 931-797-8029 Ph: (888) 401-6367 x701

2012 John Deere 648H

Timberjack 240

2014 Tigercat 234B

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

Contact: AUSTIN ‘13 KMC 2500 Track Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Skidder 931-797-8029

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

L O G G I N G

Price $45,000

Item ID: 80318

Item ID: 29966

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

2017 Eco Log 688D Item ID: 99994

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703

John Deere 333G Skid Steer

with 1700Item hours, very good ID:in31439

Rhottne F-11 Item ID: 99976

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 OR 931-797-3915

‘05 Gehl CTL 70

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

2012 Cat D6K XL

Best Value Portable Log Splitter Item ID: 14169

quality chips with patented ‘Cone’

- Small manufacturer in PA has Contact: AUSTIN Email:the Austin@lumbermensco.com made best valued log splitter.

Phone: 888-401-6367 EXT 703 Handles 931-797-8029 logs up to 32”. Uses

vans and produce 6 - 8 loads per

but electronic option is available.

condition. Easily produces high

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

drum design. Can easily load 42’ day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. x702 Morbark 20 Sam Chipharvester Item ID: 38035 FIREWOOD PROCESSORS

Contact: 2010 ShopSAM Built Wood Processor Email: Sam@lumbermensco.com -Phone: It has a888-401-6367 353 Detroit diesel, EXT 40 702 inch insert tooth circle saw, 30 foot

 Issue 364 401

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with848L a 10’ 2015 John Deere

83128 grapple, log deck. Item Has aID: hydraulic

chain and kicker that all runs off Contact: AUSTIN Email: Austin@lumbermensco.com of a 4 cylinder Mercedes power Phone: 888-401-6367 EXT 703 unit. Has931-797-8029 a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

well built processor. Item ID 13820.

Sam2009 x702 Valmet 840.4 Item ID: 79249 Firewood Processor - This is aContact: ChomperAUSTIN Model 16 PDA Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 automatice firewood processor 931-797-8029 with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

John Deere 648H

Sam x702 Grapple Skidder Item ID: 96833 LOGGING EQUIPMENT

Contact: SAMBANDIT Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 1999 Bandit 1900 Tracked Disc

Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins

Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 -

3412 Caterpillar180E Diesel Loader engine Prentice with 850 HP. 5300 hrs.

Mill in & CTR saw Item ID: good condition.

Just99822 finished 10

Contact: AUSTIN Acre job, ready to work!

Email: clearing Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Remote control. Big production

 List  seLL  exchange  buy  save

‘93 Barko 180B

Item ID: 14077 2015 Cat 545D Contact: Austin Item ID: 45196 Ph: (888) 401-6367 x703

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

‘95 John Deere C6 Timberjack 240 Tree Farmer Cable Skidder

Item ID: 13920 Item ID: 60608 Contact: Austin Contact: SAM Email: Sam@lumbermensco.com Ph: (888) 401-6367 x703 Phone: 888-401-6367 EXT 702

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

MC5,000 166 original Rotochopper grapple, hours.

Item ID: 8165 (excellent condition.). Item ID Contact: 13238.

ChrisSAM x700

Email: Sam@lumbermensco.com

1995 Barko 775 B Feller Buncher Phone: 888-401-6367 EXT 702 - Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

Tigercat 830C

meter dont work. The last 2 owners Leveling Cutter have only Item used itID: to 94337 load trucks or

asContact: a backup as needed. Has a CTR SAM Email: Sam@lumbermensco.com

delimber, grapple has Phone: 888-401-6367 EXTbeen 702 rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

Cat 515 Cable BELL Skidder

Item ID: 99873 1990 Bell Super T - This Bell has

SAM a Contact: brandSam@lumbermensco.com new Duetz engine. Lever Email: Phone: 888-401-6367 EXT 702

control, 33” bar, pump and tranny ❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM Call 888.401.MENS NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

John Deere 540B Item 0908 TheID:Tree

Contact:that SAM Started Email: Sam@lumbermensco.com it All! Phone: 888-401-6367 EXT 702 Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

Woods Publishing

Cat 535C Grapple ADVERTISING SALES Skidder Morris Woods

Item ID: 50218 (888) 401-6367 ext. 704

morris@lumbermens.co Contact: SAM Email: Sam@lumbermensco.com MARKETING DIRECTOR Phone: 888-401-6367 EXT 702

John Deere 650H LGP Item ID: 84627

Contact: SAM Sam@lumbermensco.com 72NDEmail: ANNUAL GREAT LAKES Phone: 888-401-6367 EXT 702

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Selma, North Carolina www.midatlantic-logging-biomass­ MID-ATLANTIC John Deere 540D 2007 Cat 517 expo.com/ LOGGING & BIOMASS EXPO

KENTUCKY EXPO Contact: WOOD SAM Contact: AUSTIN Email: Austin@lumbermensco.comFri, Email: Sam@lumbermensco.com 15 Sept Sat, 16 Sept Phone: 888-401-6367 EXT 703 Phone: 888-401-6367 EXT 702 Lexington, Kentucky

931-797-8029 http://www.kfia.org/ KentuckyWoodExpo.aspx

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

Donna Heninger

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

Send address changes to:

Michagan Wheel Loader Lumberman's Exchange

Item P.O.ID: Box99929 1916 Columbia, TN 38402 Contact: SAM Email: Sam@lumbermensco.com The Lumberman's Exchange Phone: 888-401-6367 EXTis702

published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers Dymax Skidsteer Tree Cutter and writers, the Lumberman's Item ID: 96694 Exchange, its principles and associates,AUSTIN are not held liable for Contact: errors Austin@lumbermensco.com or omissions. Reproduction, Email: Phone: EXT 703 in whole888-401-6367 or part, is prohibited with­ out written 931-797-8029 consent. ©2017 Woods Publishing

Item ID: 5613

Item ID: 60554

DESIGN DIRECTOR Sam Wall 2009 2384 Prentice (888) 401-6367 ext. 702 Knuckleboom Loader sam@lumbermens.co Item ID: 83019 Austin Woods Contact: (888)SAM 401-6367 ext. 703 Email:austin@lumbermens.co Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Hot Springs, Arkansas Item ID: 92188 www.arkloggers.com

83’ John Deere 740A

John Deere 540G3

** INFO LINK** Item ID: 95074

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

931-797-8029

Item ID: 99991

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

OR 931-797-3915

BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly

‘03 John Deere 748GIII

Item 13851since it 10 hours on thisID: machine

has been rebuilt, Contact: SAM it has a 24foot in Email: Sam@lumbermensco.com feed deck 20 foot out feed deck Phone: 888-401-6367 EXT 702 with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This

Franklin Mulcher is an extremely accurate machine Item ID: 99927 in ve1y good condition, Cuts 130 Contact: SAM feet a minute also has CLT presses.

Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 Item ID 13876.

Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours

on the mill, electronic computer Set

works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400

hours ready to run. Item ID 13434.

Sam x702

2003CARRIAGES Tigercat 250 Loader & Log DRIVES

Item ID: 46268 2010 Cardinal HD Carriage Contact: WALKER Carriages (Sawmill) - Cardinal Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Buck (AIM)450 ........ 36 95 Equipment Timberjack

Morbark ..................................... 9

Dual Arch Skidder 32 Corley Mfg ..............................

Item ID: 12270 CRD Metalworks .................... 25

Barko 395ML

Multitek ...................................

12 Item ID: 99943 Contact:Saw WALKER Piper's Shop.................... 13

Contact: AUSTIN Email: Austin@lumbermensco.com CW 888-401-6367 Mill-ArmorHog 17 Phone: EXT 703 OR..............

931-797-8029

Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 Rotochopper ............................ 40

OR 931-797-3915

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Controls437D ..... 10 2013Industrial John Deere Item ID: 96805 Union Grove Saw & Knife.. 2, 37 Contact: AUSTIN Universal Refiner ................... 23 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 WoodMizer ................................ l

931-797-8029

John Deere 440C

Item ID: 99999 Iron Bull ...................................

21 Contact: WALKER Kilgore Saw ............................. 22 Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 ................................. 24 Lignomat OR 931-797-3915

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

L O G G I N G

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August Cat 939 Crawler Loader

See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

Log Max 7000 Item ID: 96628

STACKING RAC

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

931-797-8029

Tigercat 630C Item ID: 83971

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 www.BakerProducts.net 931-797-8029 800.S48.6914 I S73.663.7711

❘ L!  (888) 401-MENS 401-MENS

NO. 33

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM 315.284.4126 Phone

“Precision Under Pressure”

Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

1997 Timberjack 460 Cable Skidder

Timberjack 460 Dual Arch Item ID: 91657

Item ID:24393

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Tigercat 234 Knuckle Boom Loader

Clark 667

Item ID: 68516

L O G G I N G

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Item ID: 59500 Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

‘16 Halverson H140 Peterson Chipper Item ID:(DEMO) 52045 Skidsteer

Contact: AUSTIN Item ID: JW-909632 Email: Austin@lumbermensco.com Contact: J Williams Phone: 888-401-6367 EXT 703 OR 931-797-8029

Ph: (888) 401-6367 x701

Caterpillar D4H Item ID: 99982

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 OR 931-797-3915

‘83 John Deere 4850

Item ID: 14073 Contact: Austin 440A Ph:John (888)Deere 401-6367 x703

Cable Skidder

Item ID: 99941 with 1700 hours, in very good

Contact: WALKER condition.

Easily produces high Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 quality chips with patented ‘Cone’ OR 931-797-3915

drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID Hood 13644. Sam x702 28000 Item ID: 18775 FIREWOOD PROCESSORS

2010 ShopAUSTIN Built Wood Processor Contact: Email: Austin@lumbermensco.com -Phone: It has a888-401-6367 353 Detroit diesel, EXT 40 703 931-797-8029 inch insert tooth circle saw, 30 foot  Issue 364 401

Item ID: 8834

Contact: SAM Email: Sam@lumbermensco.com ‘05 Gehl CTL 70 Phone: 888-401-6367 EXT 702

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

John Deere 750J

Best Value Portable Dozer Log Splitter Forestry - Small manufacturer in PA has Item ID: 62252

Contact: Contact:SAM Austin Email: Sam@lumbermensco.com Ph: (888) 401-6367 EXT x703 Phone: 888-401-6367 7021

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

well built processor. Item ID 13820.

Sam x702 ‘06 CAT 517 ID: 13869 FirewoodItem Processor - This is

aContact: ChomperSAM Model 16 PDA Email: Sam@lumbermensco.com automatice firewood processor Phone: 888-401-6367 EXT 702 with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased

PRENTICE 210E new2005 for $32,500.

Item ID 13865.

Sam x702LOG LOADER Item ID: 99946

LOGGING EQUIPMENT BANDIT

Email: Sam@lumbermensco.com Phone: 888-401-6367 702 Handles logs up toEXT 32”.

Uses

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade a 10’ Johnprocessor Deere with 437D Item ID: 10075 log deck. Has a hydraulic grapple,

Contact: AUSTIN chain and kicker that all runs off Email: Austin@lumbermensco.com of a 4 cylinder MercedesEXT power Phone: 888-401-6367 703 931-797-8029 unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

‘95 John Deere C6 Tree Farmer Item ID: JW-538174

‘13 KMC 2500 Track Skidder

Item ID: 35922

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 1999 Bandit 1900 Tracked Disc OR 931-797-3915

made theSAM best valued log splitter.

Contact:

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Transport Trailers Custom Log Pup

off onto a conveyor. This is a very

John Deere 437D Log Loader

Item ID: 14077 Processor Log Loader Contact: Austin Item ID: 73244 Ph: (888) 401-6367 x703

JD 437D loader

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

‘93 Barko 180B 2054 John Deere

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine

John Deere 648D

with 850 HP. 5300 Mill in Item ID:hrs.

99942

good condition. Just finished 10 Contact: WALKER

Email: Walker@lumbermensco.com Acre clearing job, ready to work!

Phone: 888-401-6367 EXT 707 OR 931-797-3915

Remote control. Big production

 List  seLL  exchange  buy  save

Item ID: 13920

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

Tigercat 240B Knuckle Boom Loader

grapple, 5,000 original hours.

(excellent Item condition.).

Item ID ID: 76297

13238.

ChrisSAM x700 Contact: Email: Sam@lumbermensco.com 1995 Barko 775 B Feller Buncher Phone: 888-401-6367 EXT 702 - Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

Barko 160B Self-

meter dont work. The last 2 owners Propelled Loader have only Item used itID: to 99812 load trucks or

asContact: a backup SAMas needed. Has a CTR Email: Sam@lumbermensco.com

delimber, grapple has Phone: 888-401-6367 EXTbeen 702 rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702 2013

John Deere 748H ItemBELL ID: 85729

1990 Bell Super T - This Bell has Contact: AUSTIN Email: Austin@lumbermensco.com aPhone: brand new Duetz engine.

888-401-6367 EXTLever 703 931-797-8029 control, 33” bar, pump and tranny ❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

Item ID: 14109

The Tree Contact: that AUSTIN Started Email: Austin@lumbermensco.com Phone: 888-401-6367 it All! EXT 703 OR 931-797-8029

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

Woods Publishing

ADVERTISING SALES Tigercat 630 C Dual Arch

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

Send address 2015 Catchanges 563C to: Lumberman's Exchange Item ID: 72531 P.O. Box 1916 Contact: AUSTINTN 38402 Columbia, Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 The Lumberman's Exchange is OR 931-797-8029

published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Timberjack Exchange, its principles380C and Item ID: 72259 associates, are not held liable for errors or omissions.

Contact: WALKERReproduction, in whole or part, is prohibited with­ Email: Walker@lumbermensco.com out written consent.

Phone: 888-401-6367 EXT 707 ©2017 Woods Publishing

Email: Austin@lumbermensco.com

feed deck 20 foot out Phone: 888-401-6367 EXTfeed 703 deck OR 931-797-8029

with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags,

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

it includes two sets of Mcdonough pressure guides. Top Casting wheel

Selma, North Carolina www.midatlantic-logging-biomass­ SATCO 318T MID-ATLANTIC expo.com/ LOGGING & BIOMASS EXPO chipper Morbark 23 disc processing head Item ID: 99944

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 OR 931-797-3915

is supported on both sides. This

Loader/ Excavator 225 LC isLog an extremely accurate machine Item ID: 51519 in ve1y good condition, Cuts 130 Contact: AUSTIN

Item ID: 99945

KENTUCKY WOOD EXPO Contact: WALKER Walker@lumbermensco.com Fri, Email: 15 Sept - Sat, 16 Sept

Email: Austin@lumbermensco.com feet a minute also has CLT presses.

Phone: 888-401-6367 EXT 703

Phone: 888-401-6367 EXT 707 Lexington, Kentucky OR 931-797-3915

OR 931-797-8029 Item ID 13876.

Austin x703

http://www.kfia.org/ KentuckyWoodExpo.aspx

S & W 125 Band Mill with Caterpillar generator - Low hours

on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

Donna Heninger

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

has beenAUSTIN rebuilt, it has a 24foot in Contact:

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 72ND ANNUAL GREAT LAKES OR 931-797-8029

Escanaba, Michigan

works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

MAILING ADDRESS

10 hours on thisID: machine Item 93592since it

LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

DESIGN DIRECTOR Sam Wall (888) 401-6367 ext. 702 Yanmar VIO27-2 mini-x sam@lumbermens.co Item ID: 42920 Austin Woods (888)SAM 401-6367 ext. 703 Contact: Email:austin@lumbermens.co Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

CAT 140G

Item ID: 59580 Hot Springs, Arkansas www.arkloggers.com Contact: AUSTIN

Item ID: 99947

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 OR 931-797-3915

Danckaert Band Resaw - Roughly

John Deere 648l

Cat 3406 140KW Genset, 12,400

hours ready to run. Item ID 13434.

Sam2008 x702 Barko 495 ML Item ID:& 7648 CARRIAGES DRIVES

John Deere 437D

** INFO LINK** Item ID: 96378

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Item ID: 99939

Contact: AUSTIN 2010 Cardinal HD Carriage Email: Austin@lumbermensco.com Carriages (Sawmill) - Cardinal Phone: 888-401-6367 EXT 703 931-797-8029 Carriage line it includes carriage

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 OR 931-797-3915

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Buck Equipment Excavator 330Lx(AIM) Link ........

Belt36 Item ID: 70897 Corley Mfg .............................. 32

Morbark ..................................... 9

CW Mill-Hogzilla ................... 15 Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Contact: AUSTIN Email: CRDAustin@lumbermensco.com Metalworks .................... 25 Phone: 888-401-6367 EXT 703 OR 931-797-8029

CW Mill-ArmorHog .............. 17

‘00 Timbco 445D 14 Hurst Boiler .............................

Item ID: 14096 Iron Bull ................................... 21 Contact: AUSTIN Email: Austin@lumbermensco.com Kilgore Saw ............................. 22 Phone: 888-401-6367 EXT 703 OR 931-797-8029 Lignomat .................................

24

- USED FORESTRY EQUIPMENT FOR SALE

❘

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and Deere 36" top saw 540B John

Cable Skidder

Timbco 425EXL Barsaw

Multitek ................................... 12 Item ID: 74878 Piper's Saw Shop.................... 13 Contact: SAM Email: Sam@lumbermensco.com Rotochopper............................ 40 Phone: 888-401-6367 EXT 702 Row Electric ............................ 20

STACKING RAC

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 or 931-797-3915

'01 John Deere 648G3 Thomas Industrial Controls ..... 10 Item ID: 90899 Union Grove Saw & Knife.. 2, 37 Contact: SAM Universal Refiner ................... 23 Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702l WoodMizer ................................

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

L O G G I N G

Morris Item ID: Woods 10836 (888) 401-6367 ext. 704 Contact: AUSTIN morris@lumbermens.co Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 MARKETING DIRECTOR 931-797-8029 John Williams (888) 401-6367 ext. 701 j@lumbermens.co

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO 573 Fri, 25 August - Cat Sat, 26 August Tigercat 630C

01’ Ponsee Bison Forwarder

Timbco 425C Item ID: 99948

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 www.BakerProducts.net OR 931-797-3915

800.S48.6914 I S73.663.7711

❘

 (888) 401-MENS L!

NO. 35

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM 315.284.4126 Phone

Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

MOST WANTED!

“Precision Under Pressure”

Cat 527 Swingboom Grapple Skidder Dozer Item ID: 99841

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

2001 John Deere 435 Item ID: 7100

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

Prentice 2190

Tigercat 845

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

L O G G I N G

Item ID: 28889

Item ID: 8139

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

FEATURED!

‘16 H140 98’Halverson Timberjack 240 C Item ID: 99838 Skidsteer (DEMO)

Contact: AUSTIN Item ID: JW-909632 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Contact: J Williams OR 931-797-8029

Ph: (888) 401-6367 x701

Item ID: 13937

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703

John Deere 650G

Tracked Log Picker/ Skidder Equipment Item ID: 99859

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

‘05 Gehl CTL 70

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Timberpro TF830D

CAT 525C Item ID: 14077 Item ID: 4091 Contact: Austin Contact: Ph: (888)AUSTIN 401-6367 x703

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

‘95 John Deere C6

Timberpro 620 Item ID: 79674

Excavator w/Ryan DS 28 Felling Head Tree Farmer

Contact: AUSTIN ‘13 KMC 2500 Track Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Skidder 931-797-8029

Contact: AUSTIN Contact: Austin Email: Austin@lumbermensco.com Phone: 888-401-6367 703 Ph: (888) 401-6367 EXT x703 931-797-8029

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703 off onto a conveyor. This is a very

Morbark 30XL

‘93 Barko 180B

well built processor. Item ID 13820.

VALMET Sam x702 840.2 FORWARDER Item ID: 9770 Firewood Processor - This is AUSTIN aContact: Chomper Model 16 PDA Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 automatice firewood processor 931-797-8029 with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

‘00 Timberjack 1110

Sam x702Item ID: 14033

Item ID: 76226

Item ID: 13920

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

Cat 525D Grapple skidder w/Winch

grapple, 5,000 original hours.

(excellent Item condition.).

Item ID ID: 99857 13238.

Chris x700 Contact: SAM

Email: Sam@lumbermensco.com 1995 Barko 775 B Feller Buncher Phone: 888-401-6367 EXT 702

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours.

Franklin Q70Hour

Item ID: 99852 with 1700 hours, in very good Contact: WALKER

Best Value Portable Log Splitter Combo machine Item ID: 1360 - Small manufacturer in PA has

quality chips with patented ‘Cone’

Phone: 888-401-6367 702 Handles logs up toEXT 32”.

Uses

Phone: 888-401-6367 EXT 703 1999 Bandit 1900 Tracked Disc 931-797-8029

have only used it to load trucks or Contact: AUSTIN Email: Austin@lumbermensco.com asPhone: a backup as needed.

CTR 888-401-6367Has EXTa 703 931-797-8029 delimber, grapple has been rebuilt.

but electronic option is available.

50% or better. 475 hp Cummins

Item ID 13694. Sam x702

Email: Walker@lumbermensco.com condition.

Easily produces Phone: 888-401-6367 EXT 707 OR 931-797-3915

high

drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644.

Sam x702 CAT 525 Item ID: 99853 FIREWOOD PROCESSORS

Contact: WALKER 2010 Shop Built Wood Processor Email: Walker@lumbermensco.com Phone: EXTdiesel, 707 - It has888-401-6367 a 353 Detroit 40 OR 931-797-3915

inch insert tooth circle saw, 30 foot  Issue 364 401

Contact: made theSAM best valued log splitter.

Email: Sam@lumbermensco.com

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

Cat 517with a 10’ homemade processor Item ID: 20725 log deck. Has a hydraulic grapple, Contact: AUSTIN chain kicker that all runs off Email:and Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 of a 4 cylinder Mercedes power 931-797-8029 unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

LOGGING EQUIPMENT Contact: AUSTIN Email: Austin@lumbermensco.com BANDIT

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine Serco 7000 Loader with 850 HP. 5300 Mill in Item ID:hrs.

40498

good condition.

Contact: AUSTIN Just finished 10 Email: Austin@lumbermensco.com

Acre clearing job, ready to work!

Phone: 888-401-6367 EXT 703 OR 931-797-8029

Remote control. Big production

 List  seLL  exchange  buy  save

5458 meter dontItem work.ID: The last 2 owners

Boom cylinders have minor leaks.

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

Hydro Ax 611E ItemBELL ID: 58544

1990 Bell Super T - This Bell has Contact: AUSTIN Email: Austin@lumbermensco.com aPhone: brand new Duetz engine.

888-401-6367 EXTLever 703 931-797-8029 control, 33” bar, pump and tranny ❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

PUBLISHER

Woods Publishing

Franklin 170 ADVERTISING SALES

Item ID: Woods 99827 Morris (888) 401-6367 ext. 704 Contact: WALKER Email: morris@lumbermens.co Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 OR 931-797-3915 MARKETING DIRECTOR

Item ID: 99845

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 OR 931-797-3915

May be sent to­ morris@lumbermens.co

POSTMASTER

address changes to: 848Send G Grapple Skidder

Lumberman's Exchange Item ID: 85843 P.O. Box 1916 Contact: AUSTINTN 38402 Columbia, Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 The Lumberman's Exchange is 931-797-8029

published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submittedC5D by advertisers Treefarmer Skidder and writers, the Lumberman's Item ID: 17115 Exchange, its principles and Contact: associates,AUSTIN are not held liable for Email: errors Austin@lumbermensco.com or omissions. Reproduction, Phone: 888-401-6367 EXT 703 in whole931-797-8029 or part, is prohibited with­ out written consent. ©2017 Woods Publishing

with 44 inch wheels, and all the

bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel

Selma, North Carolina www.midatlantic-logging-biomass­ MID-ATLANTIC John Deere 650H CAT 515 expo.com/ LOGGING & BIOMASS EXPO Item ID: 50512

is supported on both sides. This

09’ John accurate Deeremachine 700J is an extremely Item ID: 48601 in ve1y good condition, Cuts 130 Contact: AUSTIN Email: Austin@lumbermensco.com feet a minute also has CLT presses.

Phone: 888-401-6367 EXT 703 Item ID 13876.

Austin x703 931-797-8029

Item ID: 99856

KENTUCKY WOOD EXPO Contact: AUSTIN Contact: WALKER Walker@lumbermensco.com Email: Austin@lumbermensco.comFri, Email: 15 Sept Sat, 16 Phone: 888-401-6367 EXTSept 707 Phone: 888-401-6367 EXT 703 OR 931-797-3915 931-797-8029 Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

S & W 125 Band Mill with Caterpillar generator - Low hours

on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

Donna Heninger

AD SUBMISSIONS

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Escanaba, Michigan

DESIGN DIRECTOR Sam Wall (888) 401-6367 ext. 702 '93sam@lumbermens.co John Deere 548E Item ID: 14184 Austin Woods Contact: (888)AUSTIN 401-6367 ext. 703 Email:austin@lumbermens.co Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029 MAILING ADDRESS

Item ID: 99839 Hot Springs, Arkansas www.arkloggers.com Contact: AUSTIN

Prentice 180

Tigercat 615C

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam 96’ x702Hydro ax 611E Item ID:& 4654 CARRIAGES DRIVES

** INFO LINK** Item ID: 7822

Item ID: 17058

Contact: AUSTIN 2010 Cardinal HD Carriage Email: Austin@lumbermensco.com Carriages (Sawmill) - Cardinal Phone: 888-401-6367 EXT 703 931-797-8029 Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Buck Equipment (AIM) Prentice 210 E ........ 36 Item..............................

ID: 98009 Corley Mfg 32

Mor barkTimberjack .....................................

1994 240 9B Item ID:74044 Multitek ................................... 12

Contact: AUSTIN .................... 25 CRD Metalworks Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 CW Mill-ArmorHog 931-797-8029 .............. 17

Contact: WALKER Piper's Saw Shop.................... 13 Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 Rotochopper ............................

40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst2011 Boiler .............................

14 Cat 525C Item ID: 26688 Iron Bull ...................................

21 Contact: AUSTIN Kilgore Saw ............................. 22 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Lignomat ................................. 24 931-797-8029

- USED FORESTRY EQUIPMENT FOR SALE

❘

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

John Deere 648G3 Grapple Skidder

STACKING RAC Item ID: 51014

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

'04 John Deere 700H Thomas Industrial Controls ..... 10 Item ID: 14187 Union Grove Saw & Knife.. 2, 37 Contact: AUSTIN Email: Austin@lumbermensco.com Universal Refiner ...................

23 Phone: 888-401-6367 EXT 703 931-797-8029 WoodMizer ................................ l

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

L O G G I N G

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

07 Prentice Danckaert Band Resaw950B - Roughly Item ID: 5368 10 hours on this machine since it Contact: AUSTIN has been rebuilt, it has a 24foot in Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 feed deck931-797-8029 20 foot out feed deck

John Deere 640D Fri, 25 AugustCat D6K2 XL - Sat, 26 August

Item ID:Tree 64196 The

Started Contact:that AUSTIN Email: Austin@lumbermensco.com it All! EXT 703 Phone: 888-401-6367 931-797-8029 Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO

John Deere 548D

2010 Tigercat 724E Item ID: 14247

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029 www.BakerProducts.net 800.S48.6914 I S73.663.7711

❘

 (888) 401-MENS L!

NO. 37

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM 315.284.4126 Phone

“Precision Under Pressure”

Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

John Deere 540D Cable Skidder Item ID: 99277

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

JD 648 G3 Grapple Skidder Item ID: 4572

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

Prentice 2432 (’09)

CAT D4G Skidder Item ID: 99864

L O G G I N G

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

Item ID: 89885

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 801-362-2170

Treefarmer C7T GM ‘16 HalversonSkidder H140 Grapple/Winch Item ID: 11726 Skidsteer (DEMO)

Contact: Item ID:AUSTIN JW-909632 Email: Austin@lumbermensco.com Contact: J Williams EXT 703 Phone: 888-401-6367 931-797-8029 Ph: (888) 401-6367 x701

Item ID: 99846

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 OR 931-797-3915

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703

John Deere 640D Cable Skidder

with 1700Item hours, very good ID:in43930

condition. Easily produces high Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

John Deere 648H Grapple FIREWOODEquipment PROCESSORS w/Winch 2010 Shop BuiltID: Wood Processor Item 99849 - It has a 353 Detroit diesel, 40

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

inch insert tooth circle saw, 30 foot  Issue 364 401

Rayco 160 Forestry Mulcher Item ID: 77447

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

‘05 Gehl CTL 70

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Prentice Best 2014 Value Portable Log 2210 Splitter “Self Propelled”

- Small manufacturer in PA has Item ID: 99900

made the best valued log splitter.

Contact: AUSTIN

Contact: AUSTIN ‘13 KMC 2500 Track Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Skidder 931-797-8029

Contact: AUSTIN Contact: Austin Email: Austin@lumbermensco.com Phone: 888-401-6367 703 Ph: (888) 401-6367 EXT x703 931-797-8029

Item ID: 10700

well built processor. Item ID 13820.

Sam x702

John Deere 450H LGP Firewood Processor - This is Item ID: 99891 a Chomper Model 16 PDA Contact: SAM

Email: Sam@lumbermensco.com automatice firewood processor Phone: 888-401-6367 EXT 702

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

08’ Valmet 415EX Sam x702 Item ID: 99923

LOGGING EQUIPMENT Contact: AUSTIN Email: Austin@lumbermensco.com BANDIT

Email: Austin@lumbermensco.com Handles logs up to 32”. Uses Phone: 888-401-6367 EXT 703 OR 931-797-8029

Phone: 888-401-6367 EXT 703 931-797-8029 1999 BanditOR1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

John Deere 135D log deck. Has a hydraulic grapple, Excavator chain andItem kicker that all runs off ID: 99850 Contact: SAM of a 4 cylinder Mercedes power Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

‘95 John Deere C6 Ax 411 TreeHydro Farmer Item ID: 98954

off onto a conveyor. This is a very

Prentice 180E

96’ID: John Deere 643D Item 14077 Item ID: 14207 Contact: Austin Ph: (888)AUSTIN 401-6367 x703 Contact:

Franklin 155B Forwarder

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

‘93 Barko 180B

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine

Item ID: 13920

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

Cat 559B Knuckle grapple, 5,000 original hours.

Boom Loader

(excellent condition.). Item ID Item ID: 99872 13238. Chris x700 Contact: SAM

Email: Sam@lumbermensco.com 1995 Barko 775 B Feller Buncher Phone: 888-401-6367 EXT 702

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours.

540B John DeereHour

Cable meter dont work.Skidder The last 2 owners have only WALKER used it to load trucks or Contact: Email: Walker@lumbermensco.com

asPhone: a backup as needed.EXT Has a CTR 888-401-6367 707

or 931-797-3915 delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam

Timberjack 225 Cable Skidder

x702

good condition. Just finished 10 Contact: AUSTIN Email: Austin@lumbermensco.com Acre clearing job, ready to work!

Phone: 888-401-6367 EXT 703 Remote control.

Big production 931-797-8029

1990 Bell Super Bell has Item T ID:- This 46567

with 850 HP. 5300 Mill in Item ID:hrs.

99817

 List  seLL  exchange  buy  save

Bell Ultra-C Tracked BELL Cutter

a Contact: brand SAM new Duetz engine. Lever Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

control, 33” bar, pump and tranny ❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

The Item ID:Tree 99826

that Started Contact: AUSTIN Email: Austin@lumbermensco.com it All! Phone: 888-401-6367 EXT 703 OR 931-797-8029

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

Woods Publishing

Barko 495BSALES ADVERTISING

Item ID: 84253

May be sent to­ morris@lumbermens.co

POSTMASTER

Send Deere address650K changes to: John LGP Lumberman's Exchange Forestry Dozer P.O.ID: Box85213 1916 Item Columbia, TN 38402

Contact: SAM Email: Sam@lumbermensco.com The Lumberman's Phone: 888-401-6367 Exchange EXT 702 is

published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content byBar advertisers '97 Hydrosubmitted AX-411 EX Saw Head and writers, theID: Lumberman's Item 98754 Exchange, its principles and associates,SAM are not held liable for Contact: errors Sam@lumbermensco.com or omissions. Reproduction, Email: in whole888-401-6367 or part, is prohibited with­ Phone: EXT 702 out written consent. ©2017 Woods Publishing

that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel

Selma, North Carolina www.midatlantic-logging-biomass­ MID-ATLANTIC ‘89expo.com/ Timberjack 380A John Deere 648G3 LOGGING & BIOMASS EXPO Item ID: 14039

is supported on both sides. This

Cable Skidder

is an extremely accurate machine Item ID: 5597 in ve1y good condition, Cuts 130

Item ID: 58995

Contact: AUSTIN KENTUCKY WOOD EXPO Contact: AUSTIN Email: Austin@lumbermensco.com Email: Austin@lumbermensco.com Fri, 15 Sept Sat, 16 Sept Phone: 888-401-6367 EXT 703 Phone: 888-401-6367 EXT 703 931-797-8029 931-797-8029 Lexington, Kentucky

Contact: AUSTIN

Email: Austin@lumbermensco.com feet a minute also has CLT presses.

Phone: 888-401-6367 EXT 703

OR 931-797-8029 Item ID 13876.

Austin x703

http://www.kfia.org/ KentuckyWoodExpo.aspx

S & W 125 Band Mill with Caterpillar generator - Low hours

on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

CAT 525C

Tigercat 604 Cable Skidder

AD SUBMISSIONS

bells and whistles, its a production machine, with air strain conveyers

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

Phone: 888-401-6367 EXT 703 OR 931-797-8029

with 44 inch wheels, and all the

Escanaba, Michigan

Donna Heninger

MAILING ADDRESS

Contact: AUSTIN

Email:deck Austin@lumbermensco.com feed 20 foot out feed deck

LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

EQUIPMENT REPS

Phone: 888-401-6367 EXT 702

Fabtechsince head 10 Harvestor hours on this- machine it Item ID: 99821 has been rebuilt, it has a 24foot in

Hot Springs, Arkansas Contact: SAM www.arkloggers.com

Contact: AUSTIN Email: Sam@lumbermensco.com Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 888-401-6367 EXT 702 72NDPhone: ANNUAL GREAT LAKES 931-797-8029

DESIGN DIRECTOR

Item ID:Woods 6552 Austin (888) 401-6367 ext. 703 Contact: SAM Email:austin@lumbermens.co Sam@lumbermensco.com

2001 CatBand 311CU Processor/ Danckaert Resaw - Roughly

works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org Timberpro TL735B Tracked Feller Buncher

Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

JD 648H (’08) Sam x702 Item ID:& 6051 CARRIAGES DRIVES

** INFO LINK** Item ID: 13443

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Item ID: 64107

Contact: JOE HD Carriage 2010 Cardinal

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Email: Joe@lumbermensco.com

Phone: 888-401-6367 709 Carriages (Sawmill) - EXT Cardinal OR 801-362-2170

Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Buck (AIM) ........

‘98 Equipment 611 Ex-Hydro Ax 36 Item ID: 13948 Corley Mfg .............................. 32 Contact: AUSTIN CRD Metalworks .................... 25 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 CW Mill-ArmorHog .............. 17 OR 931-797-8029

‘85 John Deere 440D9 Mor bark .....................................

Item ID: 12453 Multitek ................................... 12 Contact: AUSTIN Email: Austin@lumbermensco.com Piper's Shop....................

13 Phone:Saw 888-401-6367 EXT 703 OR 931-797-8029 Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

525C Hurst2011 BoilerCAT .............................

14 Item ID: 14203 Iron Bull ................................... 21 Contact: AUSTIN Email: Austin@lumbermensco.com Kilgore888-401-6367 Saw .............................

Phone: EXT 703 22 931-797-8029 Lignomat ................................. 24

- USED FORESTRY EQUIPMENT FOR SALE

❘

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

648 G Skidder Item ID: 76963

STACKING RAC

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

‘05Industrial Tigercat 230B Thomas Controls ..... 10 Item ID: 13911 Union Grove Saw & Knife.. 2, 37 Contact: AUSTIN Email: Austin@lumbermensco.com Universal Refiner ...................

23 Phone: 888-401-6367 EXT 703 OR 931-797-8029 WoodMizer ................................ l

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

L O G G I N G

Item ID: Woods 44764 Morris (888)AUSTIN 401-6367 ext. 704 Contact: morris@lumbermens.co Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 MARKETING DIRECTOR 931-797-8029 John Williams (888) 401-6367 ext. 701 j@lumbermens.co

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO

Loader Timbco 425Exl Fri, 25 AugustLog - Sat, August Item ID:26 25974

Hydro AX 721E

John Deere 640D Item ID:63000

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 www.BakerProducts.net 800.S48.6914 I S73.663.7711

❘

 (888) 401-MENS L!

NO. 39

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM 315.284.4126 Phone

“Precision Under Pressure”

Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

JD 640D (’95) 2003 CAT 525B Item ID: 3800

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

Item ID: 51746

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 801-362-2170

Tigercat 234B Knuckle boom loader

‘80 John Deere 550 Item ID: 14037

L O G G I N G

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

Item ID: 99820

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

‘16 Halverson CAT 525D H140 Item ID: 9555 Skidsteer (DEMO)

Contact: Item ID:JOE JW-909632 Email: Joe@lumbermensco.com Contact: J Williams Phone: 888-401-6367 EXT 709 801-362-2170 Ph: (888)OR 401-6367 x701

Item ID: 11345

Contact: AUSTIN Email: Austin@lumbermensco.com ‘13 KMC 2500 Track Phone: 888-401-6367 EXT 703 OR 931-797-8029 Skidder

Contact: Contact:SAM Austin Email: Sam@lumbermensco.com Ph: (888) 401-6367 x703 Phone: 888-401-6367 EXT 702

Item ID: 1020

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703

John Deere Logger

Item ID: 82959 with 1700 hours, in very good Contact: SAM condition.

Easily produces high Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 quality chips with patented ‘Cone’

drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Cat D5H TSK Grapple Item ID 13644.

Sam x702

WinchPROCESSORS Dozer FIREWOOD

Item ID: 99809 2010 Shop Built Wood Processor

Contact: SAM - It hasSam@lumbermensco.com a 353 Detroit diesel, 40 Email: Phone: 888-401-6367 EXT 702

inch insert tooth circle saw, 30 foot  Issue 364 401

well built processor. Item ID 13820.

‘80 John Deere 550 Item ID: 14037

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 ‘05 Gehl CTL 70 931-797-8029

Item ID: JW-986495 Contact: J Williams FEATURED Ph: (888) 401-6367 x701 HOT-BUY!

tach, oil pressure, water temp and

20,000lb goose neck trailer. Item ID 13916.

AustinTSK x703Grapple Cat D4H

Sam648 x702 E Cable Skidder Item ID: 87791 Firewood Processor - This is AUSTIN aContact: Chomper Model 16 PDA Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 automatice firewood processor 931-797-8029 with John Deere power unit with low hours. Control panel includes

chain conveyer, 8 way splitter, on

w/

Winch Equipment Best Value Portable Log Splitter Item ID: 99843 - Small manufacturer in PA has

amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

Timbco 425D

Sam x702Item ID: 98053

LOGGING EQUIPMENT

Email: Sam@lumbermensco.com Phone: 888-401-6367 EXTUses 702 Handles logs up to 32”.

Contact: AUSTIN Email: Austin@lumbermensco.com BANDIT Phone: 888-401-6367 EXT 703 931-797-8029 1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

Contact: made the SAM best valued log splitter.

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

Johnprocessor Deerewith 85Da 10’ homemade Item ID: 48169 log deck. Has a hydraulic grapple, Contact: AUSTIN chain kicker that all runs off Email:and Austin@lumbermensco.com Phone: 888-401-6367 703 of a 4 cylinder MercedesEXT power 931-797-8029 unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

‘95 John Deere C6 ‘05 Timberjack 608B Tree Farmer Item ID: 13898

off onto a conveyor. This is a very

John Deere 437C

ItemJohn ID: 14077 Deere 548G3 ID: 985 Contact:Item Austin Ph: (888) 401-6367 x703 Contact: AUSTIN

‘80 John Deere 540B

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

‘93 Barko 180B

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 -

John Deere 3412 Caterpillar Diesel700H engine Item ID: 1324 with 850 HP. 5300 hrs. Mill in Contact: AUSTIN good Just finished 10 Email:condition.

Austin@lumbermensco.com Phone: 888-401-6367 703 Acre clearing job, ready EXT to work!

931-797-8029 Remote control. Big production

 List  seLL  exchange  buy  save

Item ID: 13920

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

Timberjack grapple, 5,000 original 1270C hours.

Item ID: 8676 (excellent condition.). Item ID Contact: JOE

13238. x700 Email: Chris Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 1995 Barko OR 775801-362-2170 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with

PARTS Timberjack approximately 1500 hours. 450 HourC Cable Skidder

meter dont work. The last 2 owners Item ID: 5077 have only used it to load trucks or Contact: AUSTIN

asEmail: a backup as needed. Has a CTR Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

delimber, 931-797-8029 grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702 ‘08

John Deere 335C Item ID: 14089 BELL

Contact: AUSTIN 1990 BellAustin@lumbermensco.com Super T - This Bell has Email: 888-401-6367 EXT 703 a Phone: brand new Duetz engine.

Lever OR 931-797-8029 control, 33” bar, pump and tranny

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

The Item ID:Tree 49890

that Started Contact: SAM it All! Email: Sam@lumbermensco.com

Phone: 888-401-6367 EXT 702 Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

Woods Publishing

Hud-Son 360 Portable Sawmill ADVERTISING SALES

Morris Item ID:Woods 8841 (888) 401-6367 ext. 704 Contact: AUSTIN morris@lumbermens.co Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 MARKETING DIRECTOR 931-797-8029 John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Item ID: 14250

Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

MAILING ADDRESS

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

Jackson Lumber Send address changes to: Harvester Circle Mill Lumberman's Exchange Item P.O. ID: Box2346 1916 Columbia, TN 38402 Contact: SAM Email: Sam@lumbermensco.com The Lumberman's Exchange Phone: 888-401-6367 EXTis702

published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Breezewood Band Mill Exchange, its principles and Item ID: 83736 associates, are not held liable for errors or omissions.

Reproduction, Contact: SAM in whole or part, is prohibited with­ Email: Sam@lumbermensco.com out written consent.

Phone: 888-401-6367 EXT 702 ©2017 Woods Publishing

machine, with air strain conveyers

that go up and down, with airbags,

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

it includes two sets of Mcdonough

pressure guides. Top Casting wheel

Selma, North Carolina www.midatlantic-logging-biomass­ MID-ATLANTIC Baker Bandmill expo.com/ LOGGING BIOMASS EXPO System Go Fast &Run Around

is supported on both sides. This

John Deere 200D Excavator

is an extremely accurate machine

Item ID: 96085

Item ID: 84282

in ve1y good condition, Item ID: 2959Cuts 130

KENTUCKY WOOD EXPO Contact: SAM Fri, 15 Sept - Sat, 16 Sept Email: Sam@lumbermensco.com

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

feet a minute Contact: SAM also has CLT presses.

Email: Sam@lumbermensco.com

Lexington, Kentucky EXT 702 Phone: 888-401-6367 http://www.kfia.org/ KentuckyWoodExpo.aspx

Item ID888-401-6367 13876. Austin Phone: EXT x703 702 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org

03’ Woodmizer LT-300 Operation

Desjardin Shingle Mill

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Fence Post Processing

Sam x702 Operation Item ID: & 42175 CARRIAGES DRIVES

Item ID: 63655

** INFO LINK** Item ID: 14171

2010 Cardinal HD Carriage Contact: AUSTIN Email: Austin@lumbermensco.com Carriages (Sawmill) - Cardinal Phone: 888-401-6367 EXT 703 931-797-8029 Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Buck Equipment (AIM) ........ 36

Mor bark .....................................

9 Cook 3238 HD Portable Sawmill

Hurdle 2 Sawmill

Corley Item Mfg ..............................

32 ID: 72999 CRD Metalworks .................... 25 Contact: SAM Email: Sam@lumbermensco.com CW Mill-ArmorHog .............. 17 Phone: 888-401-6367 EXT 702 CW Mill-Hogzilla ................... 15 Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Item ID: 31379 Kilgore Saw ............................. 22

Contact: SAM Email: Sam@lumbermensco.com Lignomat .................................

24 Phone: 888-401-6367 EXT 702

- USED FORESTRY EQUIPMENT FOR SALE

❘

48" bottom saw and 36" top saw

Rogers 4 Headblock Circle Mill Item ID: 23205

STACKING RAC

Contact: AUSTIN Piper's Saw Shop.................... 13 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Rotochopper ............................

40 931-797-8029 Row Electric ............................ 20

Sawmill Exchange .................. 11

John Deere 859M Tracked Cutter w/ Iron Bull ...................................

Quadco 3200 Barsaw 21

drive, hyd pac for carriage,

Item ID: 90653 Multitek ...................................

12

Dyna Products ........................ 35

Hurst Boiler ............................. 14

with onboard log turners, carriage

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Edger..... 10 ThomasCornell Industrial Controls Item ID: 33423 Union Grove Saw & Knife.. 2, 37 Contact: AUSTIN Email: Austin@lumbermensco.com Universal Refiner ................... 23 Phone: 888-401-6367 EXT 703 931-797-8029 WoodMizer ................................ l

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

S A W M I L L

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

bells and whistles, its a production

Escanaba, Michigan

Donna Heninger

Item ID: 45399 (888) 401-6367 ext. 703 Contact: SAM austin@lumbermens.co

has been rebuilt, it has a 24foot in Contact: WALKER Email: Walker@lumbermensco.com feed deck 20 foot out feed deck Phone: 888-401-6367 EXT 707 with 44 inch wheels, and all the

LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

EQUIPMENT REPS

Package Miner Edger Austin Woods

90's Model Timberjack 240A Danckaert Band Resaw - Roughly Item ID: 14111 10 hours on this machine since it

Item ID: 410 Hot Springs, Arkansas Contact: AUSTIN www.arkloggers.com Contact: AUSTIN Email: Austin@lumbermensco.com Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Phone: 888-401-6367 EXT 703 OR 931-797-8029 72ND ANNUALORGREAT LAKES 931-797-8029

DESIGN DIRECTOR Sam Wall (888) 401-6367 ext. 702 Meadows 2 Deluxe Sawmill sam@lumbermens.co

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Timberjack 380C Fri, 25 August - Sat, 26 August

Meadows #2 Deluxe

L O G G I N G

Baker Double End Trim Saw

Woodmizer LT300 Item ID: 99975

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 www.BakerProducts.net 931-797-8029

800.S48.6914 I S73.663.7711

❘

 (888) 401-MENS L!

NO. 41

Phone

315.284.4126 TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM Fax

“Precision Under Pressure”

315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

Sanborn Scragg Mill

Danchaert Band Resaw

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

S A W M I L L

Item ID: 14050

Item ID: 13876

Precision Scragg

‘14 Hurdle 3-HD Block Sawmill

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Item ID: 3607

Item ID: 13997

Dimensions ‘16Mobile Halverson H140 Model 12 Circle Saw Skidsteer Item ID:(DEMO) 62784

Item ID:SAM JW-909632 Contact: Email: Sam@lumbermensco.com Contact: J Williams Phone: 888-401-6367 EXT 702 Ph: (888) 401-6367 x701

Corinth American Sawmill Item ID: 99844

‘13 KMC 2500 Track Skidder

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

S&W 125 High Production Mill

Cornell Gang Saw

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 ‘05 Gehl CTL 70 OR 931-797-8029

M I S C E L L A N E O U S

Item ID: 8019

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 Morbark Chipper Item ID: 80356

with 1700 AUSTIN hours, in very good Contact: Email: Austin@lumbermensco.com condition.

Easily produces high Phone: 888-401-6367 EXT 703 931-797-8029 quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

2015 Morbark M20R

Item ID 13644.Track Sam x702 Forestry Chipper Item ID: 12383 FIREWOOD PROCESSORS

2010 ShopAUSTIN Built Wood Processor Contact: Email: Austin@lumbermensco.com -Phone: It has a888-401-6367 353 Detroit diesel, EXT 40 703 931-797-8029 inch insert tooth circle saw, 30 foot  Issue 364 401

Item ID: 12432

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703 MACK CHN613 ID: Log 761 Splitter Best Value Item Portable

well built processor. Item ID 13820.

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

Kenworth Logwith Truck homemade processor a 10’ Item ID: 4849 log deck. Has a hydraulic grapple, Contact: AUSTIN chain kicker that all runs off Email:and Austin@lumbermensco.com Phone: 888-401-6367 703 of a 4 cylinder MercedesEXT power 931-797-8029 unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Item ID:AUSTIN 13920 Contact: Email: Austin@lumbermensco.com Contact: Austin Phone: 888-401-6367 EXT 703 Ph: (888)OR 401-6367 x703 931-797-8029

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

good. in good working order. 22in

amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased

new for F650 $32,500.Service Item ID 13865.

Ford Truck Sam x702Item ID: 92089

50% or better. 475 hp Cummins

Has Log Lift. Uses 4-way wedge

‘95 John Deere C6 Item ID: 1271 Tree Farmer

1996 Jackson Shavings Mill

tach, oil pressure, water temp and

low hours. Control panel includes

but electronic option is available.

13HP Honda motor. Manual start

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

aContact: ChomperSAM Model 16 PDA Email: Sam@lumbermensco.com automatice firewood processor Phone: 888-401-6367 EXT 702 with John Deere power unit with

OR up 931-797-8029 Handles logs to 32”. Uses

Email: Austin@lumbermensco.com

made the best valuedEXT log 703 splitter.

Phone: 888-401-6367

Pendu Cut Off Saw Item ID: 14077 Item ID: 10632 Contact: Austin Ph: (888) 401-6367 x703 Contact: AUSTIN

Fruehauf grapple,1995 5,000 original hours.

Item ID: 69317 (excellent condition.). Item ID Contact: 13238.

ChrisAUSTIN x700 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 1995 Barko 775 B Feller Buncher 931-797-8029 - Pumps recently redone. 400 hrs

Sam x702 Int'l 4300 Bucket Truck ID: 29129 FirewoodItem Processor - This is

LOGGING EQUIPMENT Contact: AUSTIN Email: Austin@lumbermensco.com BANDIT Phone: 888-401-6367 EXT 703 931-797-8029 1999 BanditOR 1900 Tracked Disc

-Contact: Small manufacturer in PA has AUSTIN

‘93 Barko 180B

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 -

3 StrandDiesel Log Deck 3412 Caterpillar engine Item ID: 14095 with 850 HP. 5300 hrs. Mill in Contact: AUSTIN good condition.

Just finished 10 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Acre clearing job, ready to work!

OR 931-797-8029 Remote control. Big production

 List  seLL  exchange  buy  save

on injection pump. always started kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with

approximately 1500 hours.

Hour 02’ Jackson Lumber Harvester 1187 meter dontItem work.ID: The last 2 owners have only used it to load trucks or Contact: AUSTIN Email: Austin@lumbermensco.com asPhone: a backup as needed.

CTR 888-401-6367Has EXTa703 OR 931-797-8029 delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

Morbark 40/36 Item ID: 647 BELL

Contact: JOE T - This Bell has 1990 Bell Super Email: Joe@lumbermensco.com 888-401-6367 EXT 709 a Phone: brand new Duetz engine.

Lever 801-362-2170 control, 33” bar, pump and tranny

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

'93 KW CAT The425 Tree Item ID:13342

that Started Contact: WALKER it All!

Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 Since 1986, Lumbermens has

Woods Publishing

‘06 Cord King Model ADVERTISING SALES 60

May be sent to­ morris@lumbermens.co

POSTMASTER

Send address changes to: '08 Dynamic Chipper Lumberman's Exchange

Item ID: 14196 P.O. Box 1916 Columbia, Contact: SAM TN 38402 Email: Sam@lumbermensco.com The Lumberman's Exchange Phone: 888-401-6367 EXTis702

published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of Marmon Picker Truck content submitted by advertisers & Pup Trailer and writers, the Lumberman's Item ID: 59341 Exchange, its principles and associates, are not held liable for Contact: SAM errors or omissions. Reproduction, Email: Sam@lumbermensco.com in whole or part, is prohibited with­ Phone: 888-401-6367 EXT 702 out written consent. ©2017 Woods Publishing

bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags,

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

it includes two sets of Mcdonough pressure guides. Top Casting wheel

Selma, North Carolina www.midatlantic-logging-biomass­ MID-ATLANTIC expo.com/ LOGGING & BIOMASS EXPOTruck Mack Picker Prentice 410EX truck mounted

Barko 80 Loader

is supported on both sides. This

25 Ton Pintle is an extremely accurate machine

knuckle boom loader

Hitch Trailer

in ve1y good condition, Cuts 130 Item ID: 99848 feet a minute also has CLT presses.

KENTUCKYItem WOOD EXPO ID: 70691 Fri, Contact: 15 Sept Sat, 16 Sept SAM

Item ID: 99847

Contact: SAM Email: Sam@lumbermensco.com

Contact: SAM

Email: Sam@lumbermensco.com Lexington, Kentucky Phone: 888-401-6367 EXT 702 http://www.kfia.org/ KentuckyWoodExpo.aspx

Phone: 888-401-6367 EXT 702

Email:ID Sam@lumbermensco.com Item 13876. Austin x703 Phone: 888-401-6367 EXT 702

S & W 125 Band Mill with Caterpillar generator - Low hours

on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

Donna Heninger

AD SUBMISSIONS

Phone: 888-401-6367 EXT 702

with 44 inch wheels, and all the

Escanaba, Michigan

works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

Contact: SAM

feed 20 foot out feed deck Email:deck Sam@lumbermensco.com

LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

DESIGN DIRECTOR Sam Wall (888) 401-6367 ext. 702 Paccair Winch sam@lumbermens.co Item ID: 86536 Austin Woods Contact: (888)AUSTIN 401-6367 ext. 703 Email: Austin@lumbermensco.com austin@lumbermens.co Phone: 888-401-6367 EXT 703 931-797-8029 MAILING ADDRESS

Picker Truck 10 hours on thisLog machine since it Item ID: 18710 has been rebuilt, it has a 24foot in

‘15 Cord King M44 Item ID: 13961

Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

W6F Allied Systems Winch

Patriot GBN Nailer Sam x702 Item ID: 99886

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Contact: SAM 2010 Cardinal HD Carriage Email: Sam@lumbermensco.com Carriages (Sawmill) - Cardinal Phone: 888-401-6367 EXT 702 Carriage line it includes carriage

** INFO LINK**

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

CARRIAGES & DRIVES

Item ID: 56032

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Buck Equipment (AIM) ........ 36

Mor .....................................

9 AMbark General M818 Army Truck Item ID: 14576 Multitek ................................... 12 Contact: WALKER Email: Walker@lumbermensco.com Piper's Saw Shop.................... 13 Phone: 888-401-6367 EXT 707 Rotochopper ............................ 40 or 931-797-3915

LT50 Wide, EG200 Edger, Corley Mfg .............................. 32 Sharpener/Setter

Item ID: 60876 CRD Metalworks .................... 25

Contact: SAM Email: CW Sam@lumbermensco.com Mill-ArmorHog .............. 17 Phone: 888-401-6367 EXT 702

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

4700 International Lube Truck

Item ID: 61127 Iron Bull ...................................

21

Contact: SAM............................. 22 Kilgore Saw Email: Sam@lumbermensco.com Lignomat .................................

Phone: 888-401-6367 EXT 702 24

- USED FORESTRY EQUIPMENT FOR SALE

❘

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

Pup Trailers Item ID: 53363

STACKING RAC

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

2007 Industrial Morbark Chipper Thomas Controls ..... 10 Item ID: 9658 Union Grove Saw & Knife.. 2, 37 Contact: WALKER Email: Walker@lumbermensco.com Universal Refiner ................... 23 Phone: 888-401-6367 EXT 707 WoodMizer ................................ l or 931-797-3915

 SELL YOUR EQUIPMENT TODAY l§

❘

 24/7 SUPPORT 0

M I S C E L L A N E O U S

Item ID: Woods 14068 Morris (888) 401-6367 ext. 704 Contact: AUSTIN morris@lumbermens.co Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 MARKETING DIRECTOR OR 931-797-8029 John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Danckaert Resaw - Roughly Case Band FLX437 Floater

Item ID: 1101 Contact: AUSTIN www.arkloggers.com Email: Austin@lumbermensco.com Contact: AUSTIN Phone: 888-401-6367 EXT 703 Austin@lumbermensco.com 931-797-8029 72NDEmail: ANNUAL GREAT LAKES Phone: 888-401-6367 EXT 703OR 931-797-8029

published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO '97 Mack 300 Truck 09 Rotobec Loader Fri, 25 August - Sat, 26 Auguston Item ID: 44852 '87 Peterbuilt Hot Springs, Arkansas

Nova Dry Kiln Item ID: 83618

Contact: SAM Email: Sam@lumbermensco.com www.BakerProducts.net Phone: 888-401-6367 EXT 702

800.S48.6914 I S73.663.7711

❘

 (888) 401-MENS L!

NO. 43

Phone

315.284.4126 TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM Fax

“Precision Under Pressure”

315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

1973 Transcraft Drop Deck Log & Equipment Trailer

F800 Boom Bucket Truck

Item ID: 39382

Item ID: 35784

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Transcraft Trailer Item ID: 45261

M I S C E L L A N E O U S

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

25' LOG PUP 4 BUNKS TRAILER Item ID: 8062

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 801-362-2170

‘16CTR Halverson H140 Stand Alone Delimber Skidsteer (DEMO) Item ID: 7735

Item ID: JW-909632 Contact: SAMJ Williams Contact: Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 Ph: (888) 401-6367 x701

'10 Woodsman 440 Whole Tree Chipper Item ID: 14105

Contact: AUSTIN Email: Austin@lumbermensco.com ‘13 KMC 2500 Track Phone: 888-401-6367 EXT 703 OR 931-797-8029 Skidder

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

Viking Deloupe Trailer Item ID: 32415

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

‘83 John Deere 4850

Item ID: 14073 Contact: Austin 4300 Ph: Peterson (888) 401-6367 x703

Drum Chipper

Item ID: 99989 with 1700 hours, in very good

94’ Mack w/ Prentice 120 Item ID: 14215

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 ‘05 Gehl CTL 70 931-797-8029

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID

2015 Morbark M20R 13916.

Austin x703 Forestry Track Chipper Best Value Portable Log Splitter Item ID: 12383

Contact: WALKER condition.

Easily produces high Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 quality chips with patented ‘Cone’ OR 931-797-3915

- Small manufacturer in PA has Contact: AUSTIN made best valued log splitter.

Email:the Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Handles 931-797-8029 logs up to 32”. Uses

vans and produce 6 - 8 loads per

but electronic option is available.

drum design. Can easily load 42’ day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

SunID 4 13644.

Bolster Item SamLog x702Trailer Item ID: 8256

FIREWOOD PROCESSORS

Contact: AUSTIN 2010 Shop Built Wood Processor Email: Austin@lumbermensco.com Phone: EXT 40 703 - It has a888-401-6367 353 Detroit diesel, 931-797-8029 inch insert tooth circle saw, 30 foot

 Issue 364 401

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

2009 Bandit 90XP Pull-

homemade processorChippers with a 10’ Behind Wood

log deck.Item Has aID: hydraulic 86220 grapple, chain and AUSTIN kicker that all runs off Contact: Email: Austin@lumbermensco.com of a 4 cylinder Mercedes power Phone: 888-401-6367 EXT 703 unit. Has931-797-8029 a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

well built processor. Item ID 13820.

1999 International 9100

Sam x702 Item ID: 33563

‘93 Barko 180B

Item ID: 14077 Bandit 1850 Chipper Contact: Austin Item ID: 80543 Ph: (888) 401-6367 x703

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

‘95 John Deere C6 ID: 14188 Tree Item Farmer

'99 Peterbilt Road Tractor Item ID:AUSTIN 13920 Contact: Email: Austin@lumbermensco.com Contact: Austin Phone: 888-401-6367 EXT 703 Ph: (888)OR 401-6367 x703 931-797-8029

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

Ford Bucket / Boom Truck

with John Deere power unit with

grapple, 5,000 original hours.

Item ID: 80919 (excellent condition.). Item ID Contact: AUSTIN 13238. x700 Email:Chris Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 1995 Barko 775 B Feller Buncher 931-797-8029 - Pumps recently redone. 400 hrs

tach, oil pressure, water temp and

good. in good working order. 22in

Firewood Contact:Processor AUSTIN - This is Austin@lumbermensco.com aEmail: Chomper Model 16 PDA Phone: 888-401-6367 EXT 703 931-797-8029 automatice firewood processor low hours. Control panel includes amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased

new for $32,500.

Item ID 13865.

Bandit Grinder - Chipper Sam x702 Item ID: 72593

on injection pump. always started kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with

2014 Morbark M20R approximately 1500 hours.

Hour

Forestry Track Chipper

LOGGING EQUIPMENT Contact: AUSTIN Email: Austin@lumbermensco.com BANDIT Phone: 888-401-6367 EXT 703 931-797-8029 1999 Bandit 1900 Tracked Disc

meter dont work. The last 2 owners Item ID: 46375 have only used it to load trucks or Contact: AUSTIN asEmail: a backup as needed. Has a CTR Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 delimber,931-797-8029 grapple has been rebuilt.

50% or better. 475 hp Cummins

Item ID 13694. Sam x702

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 -

3412 Caterpillar6036 DieselChipper engine Morbark with 850 HP. 5300 Mill in Item ID:hrs.

75143

good condition. Just finished 10 Contact: SAM Email: Sam@lumbermensco.com Acre clearing job, ready to work!

Phone: 888-401-6367 EXT 702 Remote control. Big production

 List  seLL  exchange  buy  save

Boom cylinders have minor leaks.

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam

Tajfun Firewood Processor x702 Item ID: 14249

BELL

Contact: AUSTIN 1990 Bell Super T - This Bell has Email: Austin@lumbermensco.com aPhone: brand new Duetz engine.

Lever 888-401-6367 EXT 703 OR 931-797-8029 control, 33” bar, pump and tranny

❘

 LumbermensCO.com

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

pressure guides. Top Casting wheel

Fri, 15 Sept - Sat, 16 Sept

feet a minute also has CLT presses.

is supported on both sides. This is an extremely accurate machine

ve1y good condition, Cuts 130 COME BY OUR BOOTH AT THE RICHMOND EXPO - inBOOTH #105 KENTUCKY WOOD EXPO

MARKETING DIRECTOR

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

** INFO LINK**

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 45

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

AD DIRECTORY & RICHMOND EXPO LOCATION Air System Mfg. ......................................... 23 ............Booth #719 .................. 828-757-3500 Anson ........................................................... 15 ..................................................... 800-663-7723 B & B Mfg. .................................................. 20 ..................................................... 800-654-5320 B. H. Payne ................................................. 27 ............Booths #427 & 429........ 404-761-8711

‘93 Barko 180B

Bandit .......................................................... 6...............Booth #1369 ................ 800-952-0178

‘16Machining.........................................

Halverson H140 22 .....................................................

Item ID: 14077 888-995-1965 Bell's Contact: Austin 888-775-4883 Blockbuster Inc. .........................................

Skidsteer (DEMO) 21 .....................................................

Ph: (888) 401-6367800-803-3365 x703 Buck Equipment (AIM) ............................. 26 .....................................................

Item ID: JW-909632

Cord King ....................................................

3....................................................888-219-WOOD Contact: J Williams

Corley Mfg ..................................................

9...............Booths #428 & 527 .........423-698-0284 Ph: (888) 401-6367 x701

CW Mill ....................................................... 47 ..................................................... 800-743-3491 Ferntree Equipment & Distribution ...... 4........................................................ 778-222-9111 F&R Mfg. ..................................................... 19 ..................................................... 800-355-1250 GoFast Manufacturing ............................. 22 ............Booths #H8 & H9 ....... 800-854-7439 Great Lakes Mfg. ....................................... 24 ..................................................... 877-248-5677 Hurdle Machine Works Inc ..................... 1...............Booths #J1 & J17 ........ 901-877-6251

‘95 John Deere C6 Tree Farmer Lignomat ..................................................... 20 ..................................................... 800-227-2105

Hurst Boiler. ............................................... 10 ............Booths #602 & 701........ 877-774-8778 Kilgore Saw Company .............................. 24 ..................................................... 888-857-5153

Item ID: 13920

LM Equipment Company Ltd. ................. 11 ..................................................... 800-455-8807

Contact: Austin ‘13 KMC 2500 Track Lumbermens............................................... 45 ............Booth #105 .................. 888-401-6367 Ph: (888) 401-6367 x703 Skidder Menominee Saw........................................ 27 ............Booth #712 .................. 800-582-0470 Metal Inc.................................. 23 ..................................................... 541-345-7454 ItemDetectors ID: 14078

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

Midwest Sharpening ................. .............. 25 ..................................................... 231-924-5953 Contact: Austin

capacity!. Item ID 13421. Sam x702

Multi North America LLCx703 .................. 16 ............Booths #B4 - B8 .......... 800-243-5438 Ph:tek (888) 401-6367

BARKO 607-589-6160 Northeast Implement Inc. ....................... 26 .....................................................

1994 Barko 160B - Electric #706 & 708 ........ 800-211-9468 Pantron Automation, Inc. ........................ 46 ............Booths

,-soo-211-94&8

off onto a conveyor.

This is ............. a very8...............Booth knuckleboom, 30' boom, 75hp Piper’s Saw Shop.......................... #G1 ...................

800-845-6075

Row 18 .....................................................

800-248-4479 wellElectric................................................ built processor. Item ID 13820. motor, Rotobec continuous Ryan's Equipment...................................... 17 ............Booth ....................

Sam x702 grapple, #B1 5,000 original989-427-2829 hours.

Scandinavian Forestry Equipment ......... 7........................................................ 717-793-3102

Firewood Processor - This is

Visit us at the Richmond Expo Booth #706 & 708

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’

vans and•produce 6 - 8 loads per Through-beam

‘05 Gehl CTL 70

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 401

a Chomper Model 16 PDA

13238. Chris x700

The Saw Shop ............................................ 21 ..................................................... 603-381-4587

automatice firewood processor

1995 Barko 775 B Feller Buncher

Timber Machine Technologies ............... 48 ..................................................... 503-691-0162

with John Deere power unit with 13 .....................................................

- Pumps recently redone.

400 hrs Universal Refi ner .......................................

800-277-8068 low hours.................................................

Control panel includes12, 14on injection pump. always started Woodlandia ..............................................

877-508-8777 tach, oil pressure, water temp and PLEASE PRINT

amp gauges. Cuts logs up to 16”.

good. in good working order. 22in

MAY 2021

kohing head. head works great.

If you need to Change your Address or

20,000lb goose neck trailer. Item ID

OneAdd owner Your and comes with allto our Item ID 13185. Sam x702then Name mailing list, manuals and receipts.

Purchased 1999 Barko 160D new engine please complete this form and mail to: with

Best Value Portable Log Splitter

Sam x702

chain conveyer, 8 way splitter, on 13916. Austin x703

- Small manufacturer in PA has

made the best valued log splitter.

Handles logs up to 32”. Uses

13HP Honda motor. Manual start

but electronic optionfeet is available. range u1p to 230 • Austin Waterproof - Has IP67 day. Item ID 13882. x703 Lograted Lift. Uses 4-way wedge affected by vibration EDGERS •&Not GANGS adjustable to single two way. Great 60kBrewco LUX Saws Immunity toPA. sunlight Brewco Saws -• Two Value!

Item ID 12062. Sam x702 in excellent condition. Runs great.

(excellent condition.). Item ID

Smith Sawmill Service .............................. 2...............Booths #E4 & E5 ............ 800-598-6344

Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

new for $32,500. Item ID 13865.

approximately 1500 hours. Hour

Lumbermens™ Magazine meter dont work. The last 2 owners P.O. Box 1916 LOGGING EQUIPMENT have38402 only used it to load trucks or Columbia, TN

BANDIT

as a backup as needed. Has a CTR

Please ❑ Disc Please Change Please 1999❑Bandit 1900Add Tracked delimber,❑ grapple hasRemove been rebuilt. *Company nameCarriage and address process have your change.

Chipper - Cat Under at required Boomtocylinders minor leaks.

Company Name*: 50% or better.

475________________________________________________________ hp Cummins Item ID 13694. Sam x702

Diesel.

7500 Hours.

One owner.

94 Barko 275 - Excellent value Individual Name: _________________________________________________________ Well maintained. Item ID 13294. with low at hours at 3,500. 5.9 Address:________________________________________________________________ Sam x702

CUMMINS continuous grapple.

_______________________________________________________________________

2004 Bandit Beast Model 4680 -

Runs Great!. Item ID 13740. Sam

City: ___________________________________________________________________

3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

x702

BELL

State: __________________________________________________________________

Zip:____________________________________________________________________ good condition. Just finished 10 1990 Bell Super T - This Bell has

Acre clearing job, ready to work! a brand new Duetz engine. Lever Phone: _________________________________________________________________

Remote control. Big production control, 33” bar, pump and tranny Email:__________________________________________________________________

 List  seLL  exchange  buy  save

❘

 LumbermensCO.com

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

** INFO LINK**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses.

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 47

LUMBERMENS™ MAGAZINE 1116 West 7th Street, Suite 297 Columbia, Tennessee 38401

PRSRT STD. U.S. Postage PAID Permit No. 212 Pulaski, TN