Issuu

April 2014

Since 1986 - The Original (800) 315-9950 or (615) 349-1890

Loggers • Sawmills • Pallet Manufacturers • Wood Recycling Equipment

DealS of the Month

See Us at Booth #207

May 16 & 17, 2014Show The Richmond

'08 Cordking #44

EXPO RICHMOND 2014

May 16 9:00a.m. until 5:00p.m. Celebrating over 70 Friday years in Business! and Richmond Raceway Complex * Richmond, Virginia th

Refurbished, Inspected by Cordking Item ID: 13167 Contact: Chris ext. 600

'07 Liebherr A924 Log Loader

Saturday May 17, 2014 9:00a.m. until 3:00p.m. Equipment Exposition The 34th East Coast Sawmill and LoggingWe Have

The Original Patented

Dryers Available

Wood Shaving Mill …Since 1960!

• Several Models to choose from producing Cubic will be 7.4 2014’s largest collectionYards of sawmill, logging, biomass, pallet and related manufacturing equipment, supplies and services in the EasternCubic United States.Meters) Nearly 300 exhibiting companies (5.7 Cubic Meters) to 50 Cubic Yards (38.2 and thousands of forest products industry people will convene for • Utilize low-grade Logs & Slabs

• Produce high-quality, fluffy shavings

the 34th Richmond Show. The newest and most advanced machinery, equipment and technology in the industry will be on display. There will be acres of active hands-on machinery and equipment demonstrations outside, plus hundreds of indoor displays of new products, methods, technology and trends. Examine and compare products or services before making your

• Powered by Electric, Diesel or Tractor PTO

purchasing decisions to improve the efficiency - and profitability - of your operation. Don’t miss this opportunity to invest in your future. Please fill out and return the pre-registration form below to the exposition office by April 1, 2014. Confirmations will be mailed to all pre-registered individuals no later than May 4, 2014. There is no charge to attend the exposition if you pre-register; there will be a $10.00 charge for those who register on-site. For further information, please call (804) 737-5625.

EXPO RICHMOND 2014

Co-sponsored by Virginia Polytechnic Institute & State University Cooperative Extension and Virginia Forest Products Association

Return by April 1, 2014 to: EXPO RICHMOND 2014 • P. O. Box 160 • Sandston, VA 23150-0160 Please fill out completely and legibly. Incomplete or illegible forms can not be processed.

• Complete wood shavings plant layout services available

Only industry personnel should complete this form. Please copy this form for additional registrants. Spouses and children under 18 will receive passes at the entrance gate which will allow them to enter the exposition free of charge.

• Shavings Drying Systems

Your Name:

Nickname:

Company:

Title:

Address: City:

State:

Telephone:

FAX:

E-mail:

ZIP:

Country (if not USA): PLEASE CHECK ALL CLASSIFICATIONS OF INTEREST: -- (You must check at least one) G Dealer Sales G Paper/Pulp G Other (Please Specify) :

G Sawmilling G Logging G Pallet Production/Recycling G Equipment Manufacturer G Plywood/Panel

Priced to Sell! Item ID: 13154 Contact: Tom ext. 604

‘99 CAT 525B Grapple Skidder

Wood Shaving Mill Single or Twin-Box Machine? We offer both. Phone us for details.

Pre-registration allows entrance to the Exposition (May 16 - 17, 2014, 9am-5pm) at no charge. On-site registration is $10.00. Exhibitors: Please do not use this form. Contact show office for exhibitor registration information. Additional information is available on the Internet at www.exporichmond.com Educational Course Thursday, May 15, 2014 Two half-day workshops will be held on Thursday, May 15, 2014 on “Improving The Quality of Lumber Drying” and “Financial Management for Forest Products Business” at the Four Points by Sheraton. Lumber drying operations, no matter the size, must provide a good quality product to maintain their customer base. Drying defects not only lead to product value losses but if passed onto the customer can lead to lost sales. The morning workshop is designed to assist anyone drying lumber from the small-scale lumber dryer to commercial drying operations. The techniques and information presented are relevant to both hardwood and softwood lumber drying operations. A good understanding of financial management is critical to manage and control the business. During the afternoon session, participants will start with a business simulation that will help you to understand financial statements including specific terminology. Participants will also learn to analyze financial statements uncovering current problems or discovering potential business opportunities. For registration information ONLY FOR THE SEMINAR, contact Angie Riegel at the Department of Wood Science and Forest Products at Virginia Tech; Telephone: (540) 231-7107; fax: (540) 231-8868; e-mail: ariegel@vt.edu Note: Angie Riegel provides registration information ONLY for the seminar - NOT for the exposition. You must register for the each event separately.

Drying Systems Dealers in both new & used.

Wood Burners™ by • An economical way of generating large quantities of heat • Utilize a variety of solid fuels such as: sawdust, pelletized wood, corn cobs, etc. • Rapid combustion allows quick response to changing loads

Location: Missouri Item ID: 12618 Contact: Sam ext. 603

For classifieds call (800) 315-9950 or (615) 349-1890 or

www.LBXonline.com

• No smoke and no toxic emissions

Around the Wo ld rl So

With your smart phone: Scan QR Code to visit—

• Available in sizes up through 60 million BTU/hour

Manufacturers of — ✔ Shaving Mills ✔ Webb Solid-fuel Burners ✔ “Premier” Scragg Mills ✔ Stationary Sawmill Carriages

An dM

. S.A ade in the U.

✔ Feedworks, Decks, Turners ✔ Hydraulic, Electric and Electronic Setworks ✔ Vertical Edgers, Horizontal Edgers ✔ “Lumber Harvester” Portable Sawmills

Company, Inc. 830 N. State Road 37, Mondovi, Wisconsin 54755 USA

Website: www.JacksonLbrHarvester.com

Phone: (715) 926-3816 Fax: (715) 926-4545

2 n

The Original Lumbermanâ€™s Exchange

Visit us online at www.LBXonline.com!

PALLET STOCK, STUDS, I-JOISTS, STRUCTURAL COMPONENTS THE L-M SAWS, WILL TAKE YOU TO THE NEXT LEVEL! Leading the industry in bundle cross cut systems since 1957! New Design! New Technology!

Portable Yard Saw

Model 200MP-7-SS Gas Model 100MP-7-SS Electric 3 inch side shift, a standard feature

Traveling Arch Saw

Hydraulically controlled No manual cutting Our most popular turn key system

The New L-M “I-CUT” Bundle cross cut system!

* 60’ long frame to precision cut your I-Joists * Precision accuracy of +- 1/32” * Shorter system are available to process all your cutting needs * Tremendous labor savings, Guaranteed!

L-M Deck Cut Off Saw 3 foot to 12 foot bar lengths Hydraulically controlled

Automatic Strapping System Attach bottom crossers Side squeeze incorporated Polyester strap

Flush End Bump Rollcase

Reduce or eliminate your end trims

The Verticut P4 System now offers scan and cut technology, reducing operator error by using a bar code system!

Visit our web site www.LMSaws.com to see our complete product line and videos!

L-M Equipment Co. Ltd

Phone: 604-431-8800 Toll Free: 1-800-455-8807 Web Site: www.LMSaws.com E-Mail: Sales@LMSaws.com For Classifieds Call Your LBX REP at 1-800-315-9950

April 2014 n 3

Profile Ground Tooth

TIP TO TIP

Wood-Mizer’s SilverTip blade is a TOP-PERFORMING , economical blade for primary and secondary wood processing.

Smith Sawmill Service 800.598.6344 181 County Rd. 4763 Timpson, TX 75975

The Wood-Mizer quality you love. The convenience you need. ORA 45937 Lumbermans Exchange SmithCo_OpAd.indd 1

4 n

The Original Lumberman’s Exchange

3/21/14 2:08 PM

Visit us online at www.LBXonline.com!

The

** Auctions **

Original

Lumberman’s Exchange

James G. Murphy Co. — Page 7

www.murphyauction.com

Delta Timber – Entirety Sale Mill Equipment Located at:

Your #1 Source for Forest Industry Products!

519 Hwy 92, Delta, CO

** Calendar **

The Lumberman’s Exchange is published monthly and is circulated internationally to sawmills, loggers, pallet makers, recyclers and industrial woodworking plants.

Northeastern Forest Products Equipment EXPO Coming May 9–10, 2014 Essex Junction, Vermont

Publisher Woods Publishing

Contact Information: http://nefpexpo.net Registration available after March 1

Advertising Sales Morris Woods (615) 349-1890 morris@LBXonline.com Design Director Heninger & Associates lbxonline@comcast.net Equipment Reps Equipment Representative Tom Hirt (800) 315-9950 x604 Equipment Representative Sam Wall (800) 315-9950 x603 Mailing Address P.O. Box 1916 Columbia, TN 38402-1916 (615) 349-1890 Phone (931) 233-0802 Fax Ad Submissions May be sent to— LBXonline@comcast.net Postmaster Send address changes to: Lumberman’s Exchange P.O. Box 1916 Columbia, TN 38402

CARRIAGES & DRIVES Manual Four Head Block Mounted on all steel carriage. Husk. Manual Pulleys on Bearing . Parts Book and where to order included. - Item ID-12846 Tom 800.315.9950 ext. 604

CHIPPERS

Precision 58 Chip Pac - single chute loading system, - Item ID-12764 Sam 800.315.9950 ext. 603

COMPLETE SAWMILLS

The Richmond Show EXPO RICHMOND 2014

Richmond Raceway Complex * Richmond, Virginia Friday May 16th 9:00a.m. until 5:00p.m. and Saturday May 17, 2014 9:00a.m. until 3:00p.m. The 34th East Coast Sawmill and Logging Equipment Exposition

See page 36 for details

** INFO LINK **

Amark......................................... 10

B & B Mfg................................... 12

LM Equipment, Canada.............. 3

will be 2014’s largest collection of sawmill, logging, biomass, pallet and related manufacturing equipment, supplies and services in the Eastern United States. Nearly 300 exhibiting companies and thousands of forest products industry people will convene for the 34th Richmond Show. The newest and most advanced machinery, equipment and technology in the industry will be on display. There will be acres of active hands-on machinery and equipment demonstrations outside, plus hundreds of indoor displays of new products, methods, technology and trends. Examine and compare products or services before making your

Lignomat.................................... 31

X P O RICHMOND 2014Gauge................................. 34 B. H. Payne.E ................................ 23 M&F Co-sponsored by Virginia Polytechnic Institute & State University Cooperative Extension and Virginia Forest Products Association

Return by April 1, 2014 to: EXPO RICHMOND 2014 • P. O. Box 160 • Sandston, VA 23150-0160

Please fill out completely and legibly. Incomplete or illegible forms can not be processed. Baker...................................... 7, 15 Menominee Saw........................ 35 Only industry personnel should complete this form. Please copy this form for additional registrants. Spouses and children under 18 will receive passes at the entrance gate which will allow them to enter the exposition free of charge.

Bartlett Saw Service................. 37

Your Name:

Company:

Buck Equipment (AIM) . .......... 28

Address:

City:

Nickname: Midwest Sharpening Service... 33

Complete 3 head block Helle Sawmill - 100hp electric motor, run by Omen Cummins Generator set, Two stand automatic Log Deck, 3 saw Cedar Creek Vertical Edger, complete cost $12,000. Palllet Board resaw system, 2 roto phase Go Fast Deduster 2 head Go Fast Resaw with complete

Another satisfied Buyer

Title:

Multitek...................................... 19

State:

ZIP:

Built-Rite.................................... 13 FAX: Piper’s Saw Shop....................... 14

Telephone: E-mail:

The Original Lumberman’s Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers the Lumberman’s Exchange, its principles and associates are not held liable for errors or omissions. Reproduction in whole or part prohibited without written consent.

For Classifieds Call 800.315.9950 See pictures, prices, and Location of all equipment at www.LBXonline.com

Country (if not USA):

Connecticut Boot........................ 6 Precision Sharpening............... 22 PLEASE CHECK ALL CLASSIFICATIONS OF INTEREST: -- (You must check at least one)

G Sawmilling G Logging G Pallet Production/Recycling G Equipment Manufacturer G Plywood/Panel

G Dealer Sales

G Paper/Pulp

Cord Master................................. 8

G Other (Please Specify) : Press Releases........................ 38

Corley Mfg.................................. 25

Resource Recovery................... 26

CRD Metalworks........................ 11

Richmond EXPO........................ 36

CW Mill................................... 2, 23

Rotochopper........................... 40

Frey Lumber Co........................... 9

Row Electric.............................. 20

Jackson Lumber Co.................. 1

Sawmill Exchange..................... 27

Jackson Shavings Mill.............. 30

Select Sawmill............................ 21

James G. Murphy Auction....... 7

Sering Sawmill........................... 39

Kasco-Sharp Tech..................... 16

Smith's Sawmill Service............. 4

Kilgore Saw................................ 29

Truck & Trailer World.............. 17

King Bros Transport................. 18

U.S. Blades................................... 9

LBX Financing............................ 24

Weaver Electric......................... 32

Educational Course Thursday, May 15, 2014 Two half-day workshops will be held on Thursday, May 15, 2014 on “Improving The Quality of Lumber Drying” and “Financial Management for Forest Products Business” at the Four Points by Sheraton. Lumber drying operations, no matter the size, must provide a good quality product to maintain their customer base. Drying defects not only lead to product value losses but if passed onto the customer can lead to lost sales. The morning workshop is designed to assist anyone drying lumber from the small-scale lumber dryer to commercial drying operations. The techniques and information presented are relevant to both hardwood and softwood lumber drying operations. A good understanding of financial management is critical to manage and control the business. During the afternoon session, participants will start with a business simulation that will help you to understand financial statements including specific terminology. Participants will also learn to analyze financial statements uncovering current problems or discovering potential business opportunities. For registration information ONLY FOR THE SEMINAR, contact Angie Riegel at the Department of Wood Science and Forest Products at Virginia Tech; Telephone: (540) 231-7107; fax: (540) 231-8868; e-mail: ariegel@vt.edu Note: Angie Riegel provides registration information ONLY for the seminar - NOT for the exposition. You must register for the each event separately.

For Classifieds Call Your LBX REP at 1-800-315-9950

Dwayne of DC Logging says:

Thank you Chris for the smooth transaction. It was a pleasure doing business with you! April 2014 n 5

Zip

❑ Please Remove

State

free equipment listings! Call – (800) 315-9950

'99 Daewoo 220 Solar II

City

❑ Please Change

‘01 Timbco 820D Forwarder

Phone

✁

P.O. Box 1916 Columbia, TN 38402

*Company name and address required to process your change.

Address

Individual Name

Chris Woods, Owner Phone: 800-315-9950 Ext. 600

The Original Lumberman’s Exchange

Company Name*

❑ Please Add

Call us today for all your used equipment needs!

DealS for the Month -March-

Reduced! Item ID: 12936 Contact: Chris ext. 600

If you need to Change your Address or Add Your Name to our mailing list, then please complete this form and mail to: 6 n

Equipment Representatives

Price Reduced! Item ID: 13094 Contact: Tom ext. 604

'04 JD 700H LGP

Tom Hirt Phone: 800-315-9950 Ext. 604 Excellent Condition! Item ID: 13035 Contact: Chris ext. 600

For classifieds call (800) 315-9950 or (615) 349-1890 or

James Sam Wall Phone: 800-315-9950 Ext. 603

The Original Lumberman’s Exchange

With your smart phone: Scan QR Code to visit—

www.LBXonline.com

Workboots

Best Prices in the USA

Call with model number, size, and width for a FREE Price Quote!

(888) 438-5411 automatic run around system. Omen Cummings Generator New Condition, Green Chain Round Table, Manual Chop saw, rotating board stacker, all under roof. Excellent Condition. Thomas Ind. Computer Set Works Cost $10,000. Saw Dust Conveyer, saw dust box, 2- 56 inch inserted Tooth Saws, 2 Roto Phases, 3 Phase 480 Electric Boxes complete cost over $10,000. Will include 20’ of 2 strand kant Green Chain. - Item ID13122 - Tom 800.315.9950 ext. 604 Forest-All Sawmill, circle saw - Item ID-12762 - Sam 800.315.9950 ext. 603

FIREWOOD PROCESSORS

Best Value Portable Log Splitter - Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA - Item ID-12062 - Tom 800.315.9950 ext. 604 Chomper Firewood Processor - 60HP John Deere engine. Two chain hydraulic powered conveyor. Very good running condition. Can produce up to 2 cords/

Visit us online at www.LBXonline.com!

ENTIRETY SALE DELTA TIMBER NO MINIMUMS - NO RESERVES

One of

Mill Equipment Located at: 519 Hwy 92, Delta, CO

Nicholson A1

hour according to owner. Priced to sell. - Item ID12792 - Tom 800.315.9950 ext. 604 Custom Firewood Processor - Easily cuts 3+ chord an hour. Fold in deck, conveyer on wheels, 24” capacity!! Very clean running machine. - Item ID13108 - Sam 800.315.9950 ext. 603 ‘08 Cord King - Model #44 refurbished and completely gone thru by Cord King in ‘08 Machine it has a 24’ outfeed conveyor. Machine is in Excellent condition! - Item ID-13167 Chris 800.315.9950 ext. 600

FORKLIFTS

2006 Taylor T-160 Articulated Fork Truck - 2700 Hours. 16,000 lb

Nyle HT-34

Hough 560

The sawmill is located on approximately 15.2 acres in Delta, Colorado 10’x12’ Surge bin with cyclone, conveyor and screw auger YATES AMERICAN A20, 16” 5-head planer with MODERN IRON which is in the beautiful mountains of west central Colorado. Beautiful climate with 300+ days of sunshine and one of the best airpineapple feed table, breakdown hoist, transfers dry climates in the nation (9” of annual precipitation). Great hunting NYLE HT-34, 36’x60’ double track humidifying kiln (rebuilt in 2002), and fishing. PEERLESS boiler, s/n: 941455 QNW 740-BLS, 150 hp rotary screw compressor (new air end), 26,391 NICHOLSON 35” A1 6-arm debarker (new in & out alligator chain) hrs, s/n: 820533 72” Whole log cut off saw with 50 hp motor, in & outfeed log hauls QNW 650E, 150 hp rotary screw compressor, s/n: 74418 48” Dual husk circle saw head rig with approx 150 hp/885 rpm drive RICE LAKE SURVIVOR EZ7011-ST-100-OTR portable 100 ton load cell CLEEREMAN 24”x16” 3-knee carriage with WAGNER/FRANK truck scale with 11’x70’ low profile deck, s/n: 39AJ ELECTRIC type RP-1, 150 hp carriage drive, PAW TAW JOHN Trailer loader with ROBBINS & MYERS hoist setworks, Horizontal feed shavings baler with infeed conveyor and 40’ trailer SERING hydraulic log turner MARCO 36”x75” troughing belt radial stacker CM&E 64 slabber, 150 hp 28”x175’ troughing belt radial stacker BREWCO B-1600 40” horizontal resaw with grand run around WRIGHT W-150HD top grinder; ARMSTRONG 3-60C stretcher roll, system s/n: 9146; ARMSTRONG Trusizer, s/n: 18199; NEWMAN G280 tub MCDONOUGH 54” vertical resaw, s/n: 54-787 Assortment of log decks and hauls; lumber transfers; chain and belt PORTLAND IRON WORKS 6”x72” splined arbor gang edger, conveyors; rollcases s/n: 39347 Mill electrics to include GE 2000 amp main UKIAH 8” gang edger CAT 966C rubber tire log loader with bucket, log fork head, s/n: 78G4524 UKIAH board edger CAT 950 rubber tire log loader with bucket and forks, s/n: 81J1879 IRVINGTON 24’ trim, 16’ pass line shaft trimmer HOUGH 560 rubber tire log loader with forks SALEM 16’ line shaft trimmer JOHN DEERE 84 rubber tire log loader with bucket, 2858 hrs, s/n: Shop built 3-arm sticker stacker T60084X000285 FULGHUM 60” chipper, 200 hp motor HYSTER H150H forklift, 15,000 lb capacity, s/n: C007P0-408313 JEFFREY 34WB hog with 100 hp motor, s/n: 11981 CHAMP CB120A all-terrain forklift, 12,000 lb capacity WILLIAMS 24” hog with 100 hp motor, s/n: 15141 CAT MC030 electric forklift, 3,000 lb capacity SODERHAMN CS26, 6’x6’ chip screen, s/n: 26385 DAEWOO 1760X1 skid steer, quick disconnect, bucket, 2740 hrs, s/n: VIBRA PRO 36”x16’ vibratory conveyor, s/n: 2423 AC00208 24”x30’ Vibratory conveyor LOADSTAR 1600 single axle dump truck (2) KENTUCKY 40’ van trailers

Additional Photos, Complete Decriptions, & Preview Information Available on Our Website: murphyauction.com

James G. Murphy Co.

Commercial & Industrial Auctioneers

capacity. S/N S-A1-17076. Articulated 4-Wheel Drive. Detroit 4-71 engine. 17.5 x 25 Tires at 60%. Enclosed Cab. Two Stage Mast with Hydraulic tilt and side shift. Very nice condition. Priced to sell. - Item ID12547 - Tom 800.315.9950 ext. 604

HOGS/WOODGRINDERS

West Salem Grinder and

1.800.426.3008 - 425.486.1246

murphyauction.com

Gen Set - Model WSM 2822, With a Cutler Hammer Soft start. There is also a full set of extra hammers that go with it plus one original from factory to use as a pattern when rebuilding the others with hard surfacing. The gen set is a 360 KW with a Big Cam 855 Cummins engine. Extremely low 670 Hours.

For Classifieds Call Your LBX REP at 1-800-315-9950

Owner is negotiable. - Item ID-12386 - Sam 800.315.9950 ext. 603

Logging Equipment

1989 Ford L-9000 w 2005 Prentice 120E - Very clean Ford L-9000 Loader Truck with newer 2005 Prentice 120E loader with 25’ extend-a-boom. Has new battery; 350 HP Cummins engine with only 250,000 April 2014 n 7

n uctio e d o r anc est P High t Mainten !! s d! Lowe rantee Gua

Trailer:

Tandem axle, 8’6” wide, 22’-30’ long, 11’8” high, 5-7 tons, Electric brakes.

Saw:

Superior Carbide Slasher - Cut wood instead of sharpen chains 36” to 60” diameter, 2 ga Carbide Slasher.

Engine:

50 to170 HP or PTO Drive with user’s tractor.

Hydraulics:

Commercial Shearing

Splitter:

35 - 72 tons, 3-5 second cycle time; 2, 4, 6, 8, 10, 12, 14 & 21 way pkg wedge. Capacity - 4” to 27” Log diameter 0” to 48” Block Length Lifetime warranty on the entire splitter chamber.

Infeed Conveyor:

16” - 30” long Hydraulic powered.

Clean out Hopper: Get rid of bark and wood slivers before being conveyed away.

New Grapple System Now Available!

2040 Rogers Road, Perth, O n ta r i o K 7 H 1 P 9 Canada

www.cord-master.com Email: cordking@cord-master.com

Today!

888-219-9663 8 n

The Original Lumberman’s Exchange

Visit us online at www.LBXonline.com!

U.S. Blades has been selected by Armstrong Manufacturing as a “Authorized Dealer” for distributor for sales and service of Genuine Armstrong equipment, parts, and service for the Eastern United States. The following state are covered by this agreement: KMC ModelMaine, 2500P New Hampshire, Vermont, Massachusetts, New York, Remanufactured by KMC Connecticut, Rhode Island, Pennsylvania, New Jersey, Maryland, in 2011, dual arch grapple track skidder, torsion bar West Virginia, Kentucky, North Carolina, South Carolina suspension, JohnDelaware, Deere U.S. been selected bysupplier Armstrong Manufacturing as a U.S. Blades Blades has is your single source of high quality knives, winch model 4000, Cummins Georgia, Alabama and Florida. engine model 6BTA, Clark’s distributor for sales and servicesupplies of Genuine saws and related maintenance for Armstrong Sawmills &equipment, Chip Mills. transmission 28000. Asking(OBO)........ $200,000

parts, and service for the Eastern Unitedthe States. The following With locations to serve mills throughout Southern wood beltstates to U.S. Blades also has field service technicians for installation and are covered by this agreement: the Northeast, U.S. Blades is here to support the Forest Products Contact Jim Frey Maine, New Hampshire, Vermont, New York, Industry providing new products asMassachusetts, well as repair services. service of all Armstrong equipment with many years of Armstrong 724.564.1820 Connecticut, Rhode Island, Pennsylvania, New Jersey, Maryland, and equipment knowledge that will benefit our customers. Delaware, West Virginia, Kentucky, North Carolina, Carolina, U.S. Blades knives and saws are “Feared By TreesSouth Everywhere.” ‘84 Eager Beaver Georgia, Alabama and Florida.

Trailer

9’ wide x 48’ long, detached front, middle drop 26 ft., tires and brakes 80%, Excellent Condition!

Stocking Locations for “Genuine Armstr

U.S. Blades also has field service technicians forParts installation and and Equipment” service of all Armstrong equipment with manyFlorence, years of Armstrong parts SC 800-862-4544 and equipment knowledge that will benefit our customers.

Hampden, ME 800-432-7358

Stocking Locations for “Genuine Armstrong Parts and Equipment” Florence, SC 800-862-4544 Locations Authorized to Sell: Hampden, ME 800-432-7358 Florence, SC • Hampden, ME • Meridian, MS

Item ID: 12843 Contact: Chris Woods 800.315.9950 Ext. 600

www.LBXonline.com miles; 3 stage Jake; New Tires!; New seals; Just had brakes done. - Item ID12736 - Tom 800.315.9950 ext. 604 1976 Clark 664 Cable Skidder - Approximately 7500 hours. S/N 514F-2341CAC. Strong Clark Winch; Tire chains; Pulls good. Front tires at 70%. Rears at 30%. Detroit 3-53 runs well. Center pin tight. Slight play in steering pin. Straight metal. Weighs about 18,000 lbs. Can haul on 10 ton trailer. - Item ID12249 - Tom 800.315.9950 ext. 604 1978 Clark 666 Grapple Skidder - Strong skidder. Esco 26 grapple with winch. 28L x 26 tires at 60%. Open ROPS cab. Stick Steering. Detroit 4-53 engine. Runs good.

usblades.net•• 800-862-4544 800-862-4544 usblades.net

- Item ID-12325 - Tom 800.315.9950 ext. 604 1978 FMC Model 220 Track Skidder - Estimated 1978 Model 220 FMC Tracked Skidder. Engine and transmission have very few hours since they were reconditioned. Owner reports that about half the tracks need to be repinned and bushed, and sprockets and torsion bar need to be replaced. - Item ID-13126 - Tom 800.315.9950 ext. 604 1979 Timberjack 230 Forwarder - Good running

forwarder with 80% rubber. Open cab. Detroit engine. Simple but hard working machine. Very clean for its’ age. Hard to find. - Item ID-13057 - Tom 800.315.9950 ext. 604 1981 Hydro Ax 411B w/ Koehring 16” Hot Saw - Strong Cummins 6BT 150HP engine with no blow by. 23.1 x 26 tires at 75%. Koehring Hot Saw has fresh teeth and runs well. Very nice machine for the price. - Item ID-12538 - Tom 800.315.9950 ext. 604 1981 JD 850 Grapple Dozer

For Classifieds Call Your LBX REP at 1-800-315-9950

- 10,400 hours. Tracks @ 50 percent; 72" Esco grapple; Runs well; Some slack in blade; Everything works. - Item ID-13149 - Tom 800.315.9950 ext. 604 1987 Cat D4H Grapple Dozer - Good running Hi Track dozer with 6500 hours and wide flotation tracks. Esco grapple with 84” opening. Winch. 6 way blade works well. Just replaced rear idler. Hard to find machine. Real work horse! - Item ID-12623 Tom 800.315.9950 ext. 604 1987 Franklin Swamp April 2014 n 9

Now Accepting Visa & Mastercard

Save Your Stubs & Pieces!

➨

Let us reprocess them $30 per 100 Now have Factory Seconds $27 per 100 sticks

Cable Skidder - SR# 13280; Purchased New in April 25, 1987; Hour Meter 8200hrs. Detroit 4-53 Engine: 67x34.00x26 Tires (60% Rubber); Needs Seat, Starter, Batters, Top Drive Line Repaired, and two Side Covers. Includes parts manual. - Item ID12847 - Tom 800.315.9950 ext. 604 1987 Morbark 27 WCL NEEDS MOTOR - 1987 Morbark 27 WCL, Morbark 1000 Knuckle boom loader, 3 knife disc, Newer discharge chute, New banding around disc, Brakes and tires are also OK, Everything works well Newer clutch -- with outboard bearing, Had Cummins KTTA 750 HP engine -- needs repower - Item ID-12443 - Sam 800.315.9950 ext. 603 10 n

1989 JD 540-D Cable Skidder - Original owner; Hour meter shows 5800 hours. Serial number: 554925. 23.1X26: Tires; 20% Remaining tread. New(not rebuilt) John Deere engine w/900 hours. No smoke or noise. Runs strong. On one of the coldest days of the year, the tractor started with only 1 turn of the switch Sheet metal is very good. Pins and bushings average to good condition. Good dozer blade with good pins and bushings. - Item ID-13146 - Tom 800.315.9950 ext. 604 1989 JD 640D Grapple Skidder - 640D turbo with EZ Grapple. Serial Number W640DC507211 28L-26 tires 3@35% 1@85%. Runs good. Needs seat recovered and front U-Joint. Priced to sell! - Item ID-12676 - Tom

The Original Lumberman’s Exchange

‘02 Timberjack 608S w/Hot Saw Item ID: 12194 Contact: Sam 800.315.9950 x603 www.LBXonline.com

800.315.9950 ext. 604 1989 Timberjack 380 Grapple Skidder - Serial# 385267. Almost new grapple. Engine has been replaced. Transmission just rebuilt. 28L tires. Center pins and bushings show medium wear. Good for a year moving 2-3 loads per day. - Item ID-13143 -

‘06 Hyd-Ax 764 w/1910 Mower Runs Great! Item ID: 12987 Contact: Tom  Ph: 800-315-9950 x604

www.LBXonline.com Tom 800.315.9950 ext. 604 1990 Bell Super T Feller Buncher - Totally rebuilt by owner. Rebuilt Deutz engine; Rebuilt Wheel Motor; Standard controls have all new seals in valves and new levers: Comes with both 30” bar dangle head and 15” shear head. 23” Tires.

Visit us online at www.LBXonline.com!

There's Only One Way to Make Money in the Firewood Business…Production!

There’s Only One Way to Make Money in the Our Vision for Your Success is 20/20 Firewood Business…. Production! The Results are in YOur from the Great Firewood Shootout… Our VisiOn FOr success is 20/20

Our Rapido Loco and shootout... Woodbine Pro 20 The results Are in From the Great 20 Firewood Our rapidoDominated Loco 20 and Woodbine Pro 20Competition! DOMinATeD The cOMPeTiTiOn! the de A Ma e US th in

Woodbine Rapido Loco 20 Features Woodbine Rapido Loco 20 - 50” Simonds Circular Slasher Blade Features: - 73 HP Deutz Diesel • 50" Simonds Slasher - Tandem Axle DOTCircular Approved TrailerBlade • 73 HP Deutz Diesel - 24’ Conveyor STANDARD • Tandem Axle DOT Approved Trailer - 13’ Powered Infeed STANDARD • 24' Conveyor Standard - 8• Way Splitting Wedge 13' Powered Infeed Standard - 20” Log Diameter • 8-way SplittingCapacity Wedge - Push-Button Splitting • 20" Log DiameterSystem Capacity • Push-button Splitting System

At $54,900 Ready To Produce, At this is$54,900 the Fastest Ready to Produce, this is Production Firewood The Fastest Production Processor in North Firewood Processor in America.* North America.*

Woodbine Pro 20 Woodbine Pro 20 Features

- Oregon .404 Harvester components Features: - Tandem Axle DOT Approved Trailer • Oregon .404 Harvester Components - UpgRADeD 60 HP Deutz Diesel for more power! • Tandem Axle DOT Approved Trailer - 24’ Conveyor STANDARD • Upgraded 60 HP Deutz Diesel for More Power! At $44,900 the - 13’ Powered Infeed STANDARD • 24' Conveyor Standard Woodbind Pro 20 leads 13' Powered Infeed Standard - 8• Way Splitting Wedge At $44,900 its class in PRICE, • 8-Way SplittingCapacity Wedge - 20” Log Diameter the Woodbine Pro 20 PRODUCTIVITY and • 20" Log Diameter Capacity leads its class in Price, - Push-Button Splitting System PROFITABILITY* • Push-button System Productivity and - Our Most PopularSplitting Chain Saw Machine • Our Most Popular Chain Saw Machine Profitability*

remember HindsigHt is 20/20

Remember: Hindsight is 20/20

sO BeFOre YOu BuY cOMPAre eiTher OF The Soseries Before You Buy, compare either of the 20 PrOcessOrs FrOM crD MeTALWOrks TO AnYProcessors BrAnD - AnY siZe - AnYWhere. 20 Series from CRD Metalworks to Any Brand, Any Size, Anywhere check them out at the

*As Seen In Sawmill & Woodlot Magazine

Family Owned – Family Operated – Factory Direct

Family Owned—Family Operated—Factory Direct

Call 888-667-8580

Sawmill & Woodlot www.crdmetalworks.com

For Classifieds Call Your LBX REP at 1-800-315-9950

*As seen in

magazine.

April 2014 n 11

Financing Available

Shrink Wrap Firewood/Wastewood

Sell Your WOOD – $300/cord or More! Double or triple your profits by shrink wrapping wastewood - forewood with WOOD-PAKer! Attractive various size packages can be obtained with our high production, easily operated and affordable machines. Eight machines available. The ideal equipment for producing square bundles-palletizable for ease in storage and transporting. Inquire for free details. Video and Package samples at nominal fee. B & B Manufacturing • 3007 West River Road • Olean, NY 14760

Toll Free 1-800-654-5320 E-mail: bbmfg@sprynet.com • Web: http://home.sprynet.com/~bbmfg/

‘05 Komatsu D39 PX Dozer

Item ID: 12994 Contact: Tom  Ph: 800-315-9950 x604

www.LBXonline.com Serial Number: BCH-3585 - Item ID-12710 - Tom 800.315.9950 ext. 604 1991 Barko 160 Articulated Carrier - Good running machine with about 9,000 hours. Mounted on Rough Terrain 4 wheel drive carrier that can pull a trailer and work in sloppy conditions. Great value for a loader on a carrier like this! - Item ID-12931 - Tom 12 n

‘97 Bell TF-120 Feller Buncher Item ID: 12835 Contact: Sam Ph: 800-315-9950 x603

www.LBXonline.com 800.315.9950 ext. 604 1991 Franklin Swamp Buggy Cable Skidder SR#14372. Hour Meter: 9515hrs. Detroit 4-53 Engine: 67x3400x26 Tires (70% Rubber); Running and Ready to Work. - Item ID-12848 - Tom 800.315.9950 ext. 604 1992 Hood 24000 Loader with circle saw slasher mounted on self propelled

The Original Lumberman’s Exchange

‘96 CAT D5H XL Dozer Item ID: 13021 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

carrier. New John Deere 6414 Engine; All pumps completely rebuilt; No cracks; Runs like a charm; Spare saw - Item ID-13142 Tom 800.315.9950 ext. 604 1993 Timberjack 380B PG Highlift Tree Trimmer, s/n CM4478, 5,152 hours, Delivered New in 1995, Cab with A/C, 5 blades, 75 reach, Branton Winch, Push Blade, 4X4, Firestone

67X34.00/26 tires @ 90%, Counter Weight, 6 cylinder Cummins Diesel Engine. FOB:Okeechobee, FL - Item ID-13090 - Tom 800.315.9950 ext. 604 1994 Barko 275B Stationary Loader Includes Mounting platform and 75HP electric motor. Very few hours as this machine was taken down shortly after purchase and was never used again. Has been sitting in excess material yard. Has 30’ reach. Continuous rotation grapple. Cab with AC. Original price was $140,000 - Item ID-12969 Tom 800.315.9950 ext. 604 1994 Barko 275B Trailer Mount Loader - Joystick controls. CTR Delimber. Recently overhauled Cummins 6BT5.9 engine. Has been sitting for about 6 months. Great Value for a loader/delimber combination. The Barko 275B is a 30,000 lb. lift capacity unit. - Item ID13085 - Tom 800.315.9950 ext. 604 1994 JD 640E Cable Skidder - Just over 10,000 hours; 23.1 x 26 Tires at 70%; Chains NOT included: Many updates-New Hydraulic Pump (6 months old), Rear end redone (3 Months ago); Hydraulic Control Block-New Seals (3 Months ago); Rebuilt Water pump (3 months ago). Unit running today. - Item ID-12500 - Tom 800.315.9950 ext. 604 1994 JD 640E Cable Skidder - Very clean and good running 1994 JD 640E. S/N 546241. New 28L x 26 tires. Steering cylinders rebuilt;

Visit us online at www.LBXonline.com!

‘84 Prentice Log Trailer Spring Suspension and Steel Frame Wood floor 12 by 2 height and 42” length 96” wide, tires 90%, Tandem Axel, 1700 hrs on JD motor.

Item ID: Call for No. Contact: Sam 800.315.9950 x603 www.LBXonline.com

2011 Case TR320 Skid Steer Mulcher 300 Hours! Item ID: 13020 Contact: Tom  Ph: 800-315-9950 x604

www.LBXonline.com New steering bushings; New seat; New JD radiator; New Hyd Pump; New alternator; New injection pump; Blade valve rebuilt; New hoses; New 125’ cable. Hour meter broken but estimated hours are 10,500. Machine is too large for owner. - Item ID13102 - Tom 800.315.9950 ext. 604 1994 JD 648E Grapple Skidder - Good running 1994 JD 648E. Single Arch Grapple. Winch. 28L x 26 tires at 65%. Cummins engine. 7470 hours. Item ID-13103 - Tom 800.315.9950 ext. 604 1994 Prentice 180D Log Loader - 11,793 hours, Machine is in good

condition, it has been sand blasted and painted, low pro tires 17.5 - Item ID12759 - Sam 800.315.9950 ext. 603 1995 Barko 160B on Mack Truck - Very clean Barko 160B on good running Mack Truck. Joystick controls. Circle Saw Slasher Package. 27’ boom with 42” continuous rotation grapple. Cummins 6 cyl. engine runs good. Priced without slasher. Add $18,000 for circle saw

slasher on trailer. - Item ID13056 - Tom 800.315.9950 ext. 604 1995 Entyre Low Boy Trailer - 9’ 10” wide. Decent condition. Priced to sell - Item ID-12946 Tom 800.315.9950 ext. 604 1995 Great Dane Flat Bed Trailer - 1995 Great Dane 96x48ft. Will need floor. Tires are fair. Lights and brakes work. Priced to sell. - Item ID-12892 - Tom 800.315.9950 ext. 604 1995 JD 290D with Hytec

For Classifieds Call Your LBX REP at 1-800-315-9950

4700 Harvester Head 290D in good condition. Engine just overhauled. Undercarriage at 50%. New water pump. Runs well. Cab has heat and air with stereo and all run well. Head recently updated and does great job in hardwood. Priced to sell! - Item ID-12206 - Tom 800.315.9950 ext. 604 1995 Morbark Wolverine 3-Wheeled Feller Buncher - S/N 4073. Only 1000 hours on new JD 4 cylinder April 2014 n 13

PIPER’S Saw Shop ‘95 CAT 518C Grapple Skidder

5 7 0 6 • 5 4 8 • 800

Item ID: 12302 Contact: Sam 800.315.9950 x603 www.LBXonline.com

Promotional Pricing Offer

Simonds Red Streak Hard Back 1-1/4” x .042 x 3/4” or 7/8” Length 13’2”

$14.71 $14.27 each Tell us you saw it here!

L im it e d T im e O n ly

‘12 Log Max 7000C

Processing Head Item ID: 13074 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

engine. Recently replaced turbo. 23.1 tires at 50%. 16” Rapid Buncher shear head. Machine is fast and in very good condition. - Item ID-12531 - Tom 800.315.9950 ext. 604 1996 511EX Hydro-Ax With Bunching Saw Head - Hours est at 6800. Only 200 hours on factory reconditioned hydraulic motors and pumps. Comfort cab with working air. 28L tires with chains at 50%. Saw head has side 14 n

pocket for cutting larger trees. Very well maintained machine. - Item ID-12072 Tom 800.315.9950 ext. 604 1996 Cat D5H XL Dozer - 50% Undercarriage. 6 way blade. Open ROPS. 5407 Hours. Runs good. - Item ID-13021 - Tom 800.315.9950 ext. 604 1996 Franklin 560 Cable Skidder - Serial number 16432; Cummins Recon engine with 177 HP; 28L Tires at 60%; Heat and AC; Running today in very

The Original Lumberman’s Exchange

good condition. Hour meter broken. Estimated 9500. - Item ID-12734 - Tom 800.315.9950 ext. 604 1996 Prentice 210D Knuckleboom - 10,332 hours. - Item ID-12914 Sam 800.315.9950 ext. 603 1996 Timbco 425B w/ Fabtek Head - Good running machine with 9650 hours. Cummins 6BT5.9 engine. 24” pads. U/C at 50% or better. AC/Heat/ Stereo all work. Fabtek Model 2000RP 4-Roller

processor head. - Item ID12830 - Tom 800.315.9950 ext. 604 1996 Timberjack 230 Forwarder - 15,000 hours. Good running condition. Working today. Serco Loader. Dry and still runs strong. - Item ID-12943 Tom 800.315.9950 ext. 604 1996 Timberjack 450C Grapple Skidder Approximately 9000 hours. Working today. 28L x 26 tires at 40%. Chains for front tires. Single Arch Grapple. Winch. Heat and AC work well. Cummins Power. transmission has been gone thru, it has new glass in all windows but

Visit us online at www.LBXonline.com!

the front one. Heat and air fixed and new exaust pump, and the grapple cylinders repacked. - Item ID-12769 - Tom 800.315.9950 ext. 604 1996 Valmet 603 3-Wheeled Buncher - Good running condition. Hours estimated at 8500. Meter does not work. 28L x 26 tires at 50%. Koehring 18” Hot Saw. Cummins 4BTA3.9 engine. AC and Heat work. Ready to work. - Item ID13155 - Tom 800.315.9950 ext. 604 1997 Cat 527 Grapple Dozer - 1997 CATERPILLAR 527GR, Tracked Grapple Skidder. Just under 16,000 hours. ESCO Fixed Boom Grapple & Winch Drum (no cable attached), 6 Way Blade, ROPS with Wire Cage Cab. Very good interior. Undercarriage at

‘06 Peterbilt Log Truck Item ID: 13018 Contact: Tom 800.315.9950 Ext. 604

www.LBXonline.com

70%, Tracks at 90%, Well maintained and ready to work. - Item ID-12901 - Tom 800.315.9950 ext. 604 1997 Linkbelt 3400 Stroke Delimber - has rebuilt Pierce Stroke Delimber. 36” Pads on 60% undercarriage. 5221 hours. Good running condition. Owner just spent $30,000 on upgrading delimber. - Item ID-12992 - Tom 800.315.9950 ext. 604

‘94 Prentice 180D Log Loader Item ID: 12759 Contact: Sam 800.315.9950 x603 www.LBXonline.com

1997 Prentice 210E TMS Package - 9850 Hours on this very clean machine. Working today. Has total merchandising system with CTR 414 Delimber and CTR 42 Slasher. Well maintained. Has AC but is not working. - Item ID12563 - Tom 800.315.9950 ext. 604 1997 Timberjack 460 Grapple Skidder -

For Classifieds Call Your LBX REP at 1-800-315-9950

‘06 Tigercat 630C Grapple Skidder Item ID: 12996 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

12,300 hours. Very well maintained. 28L x 26 tires at 90%. Big winch. 100” Esco Grapple. Cummins engine. Working today. - Item ID-12564 - Tom 800.315.9950 ext. 604 1998 Franklin 170 Cable Skidder - Unit has 28Lx26 tires 50% rear and 30% front; Recon Cummins 6BTA5.9 engine added April 2014 n 15

REduced

John Deere 548G Skidder is in great working condition and working daily Motor recently rebuilt with approx 200 hours. • Has new hydaulic pump • New turbo • Rear end recently gone through • Grapple cylinders recently packed • New glass • New rear tires • Good winch

‘07 Hood 182 Loader/ Carrier/Slasher Total Package! Item ID: 13082 Contact: Tom Item ID: 13056 800.315.9950 Ext. 604 www.LBXonline.com

• Heat/ac works • Everything works except radio

Item ID: 12864 Contact: Chris Woods 800.315.9950 Ext. 600

www.LBXonline.com

‘79 Timberjack 230 Forwarder Cheap and Runs Good! Item ID: 13057 Contact: Tom  Ph: 800-315-9950 x604

www.LBXonline.com about a year and a half ago; Hour meter is broken; H38 Franklin winch; Very clean and works almost everyday. Chains NOT included. - Item ID-12735 Tom 800.315.9950 ext. 604 1998 Freightliner Haul Truck - Decent running condition. 923,000 miles. Well maintained. Good back up rig! - Item ID-13022 - Tom 800.315.9950 ext. 604 16 n

‘83 CAT 988B 5228 hours! Item ID: 12375 Contact: Sam 800.315.9950 x603

www.LBXonline.com 1998 John Deere 650G Dozer - New tracks 95%, very good shape, 7,000 hours. 6-Way Blade. - Item ID-12700 - Tom 800.315.9950 ext. 604 1998 Model DM Mack Log Truck - 300 HP Mack Engine; 330,000 miles; 7 Speed Transmission, 46K Rear, 20K Front, Tri -Axle, 22.5 Tires, Like New Log Bed, Truck is in very good condition! Plumbed to take pup trailer. Very well maintained. - Item ID-12493

The Original Lumberman’s Exchange

- Tom 800.315.9950 ext. 604 1998 Pitts 42’ Log Trailer - Nice condition. 42’ long. 102” wide. 95,000 lb GVW. - Item ID-12565 - Tom 800.315.9950 ext. 604 1998 Tigercat 230 Loader 9400 hours. Tight and dry. No leaks. AC blows cold. Priced to move! - Item ID12616 - Tom 800.315.9950 ext. 604 1998 Timbco 425 w/ Quadco 2800 Saw Clean unit and well maintained. 2800 has 360 degree rotation for max production. 24” single grousers. Undercarriage at 50%. Pumps are dry. Machine working today. - Item ID-12719 - Tom 800.315.9950 ext. 604 1998 Valmet 603 3-Wheeled Buncher - 6500 hours on total machine but no hours on 4BT3.9 Reman Cummins Engine. Equipped with 18” Waratah High Speed Disc Saw. 28L x 26 Tires at 40% complete with chains.

This machine has been extremely well maintained and runs very well. Hard to find them in this good of condition. Has a twin that is available if you need two units. - Item ID-12524 - Tom 800.315.9950 ext. 604 1998 Valmet 603 3-Wheeled Buncher - Good running machine with about 6620 hours. Owner maintains his equipment to the highest degree and it shows. Complete with Waratah High Speed Disc Saw Head. 28L x 26 Tires with chains at 90%. Just installed new Reman Cummins 4BT3.9 Engine. - Item ID-12525 - Tom 800.315.9950 ext. 604 1999 Cat 525B Grapple Skidder - heat and a/c, New Motor with 3000 hours, New Bushings, New Grapple Cylinder, New Turbo, Tires are 28L x 26, fronts are at 40% and rears are at 80%. - Item ID-12618 Sam 800.315.9950 ext. 603 1999 Deawoo 220 solar ll - 11000 hours, it has heat and air! Its a Daewoo inline 6 Engine 145 hp. The Computer works for the stroker. Tracks are around

Visit us online at www.LBXonline.com!

Enclosed Cab

The Blackstone Beaver Components

• Operator comfort in the enclosed cab • Dual joystick controls ease hand fatigue

• Dual joystick controls ease hand fatigue

Out-feed Conveyor PLC controls

• • • •

built in the USA with industry standard components. Hydraulic systems built with high quality Parker hoses and hose ends.

and electronic valves reduce operator error and optimize speed. PLC controls and electronic valves reduce

Control conveyor hydraulically from cab Conveyor hydraulically folds for transport Cleated belt holds wood securely 4" cleanout area allows small debris to fall

Size

eaver

lackstone

eaver

Control conveyor hydraulically from cab Conveyor hydraulically folds for transport Cleated belt holds wood securely 4" cleanout area allows small debris to fall

lackstone

Out-feed Conveyor • • • •

The Blackstone Beaver Firewood Processor is built in the USA with industry standard components. Hydraulic systems built with high Enclosed Cab The Blackstone Beaver Components quality hoses and hose ends.Beaver Firewood Processor is • Operator comfort in theParker enclosed cab The Blackstone

Firewood Processors

operator error and optimize speed.

Firewood Processors

Size Maximum log length is 25' with a 24" diamat-

er. Cut length adjustable up to 24" long. Maximum log length is 25' with a is24" diamatSplitting head can be adjusted by up to 10" er. Cut length is adjustable to 24" for up consistent splitslong. on various log diameters. Splitting head can be adjusted by up to 10" Customization Blackstone Beavers are customizable by for consistent splits on various log diameters.

Customization

the manufacturer. Integrate your ideas into a production machine built to match your requirements! Don’t need a mobile unit, specify a skid-mount.

Blackstone Beavers are customizable by Speed the manufacturer. Integrate your ideas into with a 3-stage The processor comes standard hydraulic pump. All strokes are performed in a production machine built match your highto speed by default, but if greater splitting • Largest hydraulic folding deck in the business is needed, pressure • Deck folds requirements! into the machine for transport Don’t needforce a mobile unit,will immediately be increased. When load is decreased, the high speed stroke will renew. specify a skid-mount. 3-Strand Live Deck

TheLive Blackstone 3-Strand Deck Beaver Firewood

Processor isfolding built indeck thein USA • Largest hydraulic the with business components. • Deckindustry folds intostandard the machine for transport

Hydraulic systems built with high quality Parker hoses and hose ends.

lackstone

Speed

eaver

• Operator comfort in enclosed cab Customization The processor comes standard with a 3-stage • Dual joystick controls ease hand Blackstone Beavers are customizable by hydraulic pump. All strokes are performed in fatigue the manufacturer. Integrate your ideas high speed by default, but greater P: if (508) 478-5902 splitting 123 Uxbridge Road • Comfortable, adjustable seatMendon, MA 01756into a production machine built to match F: (508) 321-9876 force is needed, pressure will immediately be your requirements! Don’t need a mobile • Joystick controls increased. When load is decreased, • Engine controls inside cabthe high unit, specify a skid mount. speed stroke will renew.

The Blackstone Beaver Components

Size Maximum log length is 25’ with a 24’ diameter. Cut length is adjustable up to 24” long. Splitting head can be adjusted by up to 10” for consistent splits on various log diameters.

lackstone

eaver

11’. Stroke delimber is a Pro mark 50. It’s designed under the timberline, and has a timberline head on it. We have all the maitenance records and extra parts! Great running machine! - Item ID-12936 Chris 800.315.9950 ext. 600 1999 JD 643 DELTA Carrier w/Rake - This machine is a 99 model Delta. VERY POWERFUL and UNIQUE! It has a CAT 350hp engine, THREE pumps and valves that can work a mower, feller buncher saw head, or high speed mulcher. Only 5000 hours. 34” Tires at 60%. This machine was built on the 643G assembly line, so parts come from Deere except for the engine which CAT will support. This machine is designed for heavy duty work and includes an extra capacity fuel tank, water tank, and hydraulic tank. This is a WORK HORSE and a super value! Comes equipped with a 10 foot rake. The cab is well appointed with cold air and heater. This machine was recently completely serviced and is ready to go to work. - Item ID-12624 Tom 800.315.9950 ext. 604 1999 Timbco 425/Valmet 500 Harvester - Branded a Valmet 500T Harvester, this is in fact a Timbco 425 Leveling Tracked Harvester with a Valmet processing head. Comes with fire suppression system; 5.9 Cummins; Burns about 4.5-5 gallons an hour. The U/C has less than a 1000 hours on it. Equipped with a Cranab 1400 squirt boom. Comes with Lox Max 4000

P: (508) 478-5902 F: (508) 321-9876

123 Uxbridge Road Mendon, MA 01756

Speed The processor comes standard with a 3-stage hydraulic pump. All strokes are performed in high speed by default, but if greater splitting force is needed, pressure will immediately be increased. When load is decreased, the high speed stroke will renew.

Featuring: Exclusive Split Belt, Stand Alone Conveyor Featuring our exclusive split belt design stand alone conveyer. We customize any length and option available! Call today for more information!

(508) 478-5902

www.blackstonebeaver.com harvesting head, with Logmate 402 computer. Head has about 4500 hours. Log Max- s/n 2186. Machine hour meter not working. New oil cooler

100 hours ago. Extra chains and bars, plus some parts from uptime kit. - Item ID-13140 - Tom 800.315.9950 ext. 604 1999 Timbco 425D

For Classifieds Call Your LBX REP at 1-800-315-9950

Harvester w/Keto 800 w/ Keto 800 Processing Head - S/N 1598; Approx 14000 hours; Squirt stick and long harvester boom (36’ reach), 28” double grouser April 2014 n 17

REduced King Bros Transport and Logistics

‘04 Franklin Q80 Single Arch Grapple Skidder w/Winch

Services

Item ID: 12843 Contact: Chris Woods 800.315.9950 Ext. 600

www.LBXonline.com

2009 Peterbuilt Clean-up Truck w/ a 2009 Extenda Boom Loader Item ID: 12597 Contact: Sam 800.315.9950 x603 www.LBXonline.com

We offer Full Load and LTL service Flatbed, Oversized, and Special Needs Freight Nationwide Coverage, including Canada International Shipping Fully Insured Contact Us for a Quote Today! PO Box 264 • Mifflin, PA 17058 • Fax (888) 363-9697

(717) 602-4106

nelson@kingbroslogistics.com • www.kingbroslogistics.com

pads. Cummins 8.3L 260 hp engine (New Reman 11/10 ). New rails and rollers 9/11. Reman Rexroth tram pumps 1/12. Non continuous rotation on upper. Keto 800 processor head, Approx. 2002 model. S/N C3T020 ( 2002?), new tracks, top knives 11/11, 40” 11H bar, 33” cut, no top saw, Hakmet computer, CanBus computer system with 4 wires. - Item ID13150 - Tom 800.315.9950 ext. 604 2000 Cat M318 MH Totally refurbished with 30 day warranty. Gone through from end to end by professional rebuild factory. Hydraulic elevated cab for great visibility. 38’ reach. Logging grapple included. Fantastic Yard Machine. FOB: Idaho. Financing available. 18 n

Possible RENT OPTION! - Item ID-12520 - Tom 800.315.9950 ext. 604 2000 Fabtek 153 Harvester - 13,000 hours. New Engine; New Pumps; New Roller Chain; Runs Great! Working today. - Item ID12944 - Tom 800.315.9950 ext. 604 2000 GMC 8500 Log Truck w/Loader - Six speed transmission with a 2 speed rear end. Powered by a strong CAT 3126 engine with 250HP. Approx. 106,000 miles. Truck is single axle with pusher in front. Pusher purchased new one year ago. Loader is a 1995 Prentice Model 120c w/22’ reach. Has one or two hydraulic drips. Pole Trailer is a 60’s model Frost w 80% tires in very good condition. Pulls great. - Item ID-12893 - Tom

The Original Lumberman’s Exchange

‘04 Linkbelt 3400 Stroke Delimber

Rebuilt Stroker! Item ID: 12992 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

800.315.9950 ext. 604 2000 Grove RT750 Rough Terrain Crane - Super nice unit. Loaded. 6500 hours. Very good condition. CAT 3116 Diesel Engine; 360 degree rotation. Max reach over 170’ with both jibs. Total weight = 82,500lbs. Tires =29.5 x 25-28 PR earthmover type, bias tubeless at 70%. - Item ID12938 - Tom 800.315.9950 ext. 604 2000 New Holland EC215 w/ Waratah 616 Processor - Approx 7200 hours. 2000 New Holland Model EC215 with Waratah 616 Processing Head; Carrier in good condition. Tracks

‘94 Barko 275B Loader Pkg. Runs OK: Low Price!

Item ID: 13085 Contact: Tom  Ph: 800-315-9950 x604

www.LBXonline.com at 70% with 32" pads; Cummins 6BT5.9 engine with 154HP; S/N 721580; Operating weight = 47000 lbs; Waratah head has top saw option. - Item ID-12849 - Tom 800.315.9950 ext. 604 2000 Peterbilt Sleeper Truck - Good running condition. Priced to sell. - Item ID-12492 - Tom 800.315.9950 ext. 604 2000 Prentice 625ATL Loader - 2000 Prentice All Terrain Loader. All wheel drive and steer. Set up to pull loaded trailer.

Visit us online at www.LBXonline.com!

P.O. Box 170 • Prentice WI 54556-0170 • 800-243-5438

www.multitekinc.com • sales@multitekinc.com

Multitek Firewood Processors Increase Your Productivity and Profitability • Quality Equipment to Reduce your Labor Costs • Circular Saw or Bar & Chain Models • 7 Models to Choose From • Production Ratings up to 5.5 Full Cords Per Hour

Made in the U.S.A.

Great yard machine. 10,800 hours. Cab access platform. Cab riser. All maintenance history available. FOB: Maine. - Item ID-12898 - Tom 800.315.9950 ext. 604 2001 CAT 330BL Log Loader - Good running condition. 2000 hours on new hydraulic pump. 44’ Live Heel Boom w/Jewell Continuous Rotation Grapple. S/N 6DR04994. New sprockets and rails. Cab riser and cab guard. Total hours 19,000. Item ID-12678 - Tom 800.315.9950 ext. 604 2001 Chevy C7500 Service Trk w/Trailking Trailer - Great package. Chevy truck has Cat 3126B engine. 28,877 miles. 22.5” tires are in good shape. Good steel flatbed with mini fifth wheel

‘10 CAT D9T w/ Chip Blade

Mill Machine! Item ID: 13152 Contact: Tom  Ph: 800-315-9950 x604

www.LBXonline.com and headache rack. Trail King Trailer Model # TK 32-2401. GVWR 40180 lb; GAWR 18160 lb.ea. with 215/75R X 17.5 (16PR); Floor 19’ long; Tail 5’ long; Hyd operated ramps 5’ long. Super package and priced to sell!! - Item ID12746 - Tom 800.315.9950 ext. 604 2001 Precision 23/66 Whole Tree Chipper One Owner: S/N 3310.

‘08 John Deere 334J Only 900 hrs! Item ID: 13034 Contact: Sam 800.315.9950 x603 www.LBXonline.com

Cat 3412E engine with 750HP s/n 4CR01701. New Injectors. Includes air compressor. Oil changed every 250 hours. 10,500 hours and runs like new. 3 axle trailer, California legal, rubber at 85%, and good brakes. Tows smooth. Equipped with Husky 175 loader. Has 3 knife disc with key knife system installed. Makes a

For Classifieds Call Your LBX REP at 1-800-315-9950

‘05 JD 748GIII Grapple Skidder Priced to Sell! Item ID: 13058 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

super clean chip. Cab has heat and AC working well. Also has stereo radio and CB. New glass in loader. External chute controls. Super Clean! - Item ID12526 - Tom 800.315.9950 ext. 604 2001 Timbco 445D w/ Quadco 2800 Saw - Only April 2014 n 19

ROW ELECTRICAL EQUIPMENT, INC. YOUR SOURCE FOR USED, RECONDITIONED:

• Squirrel Cage Motors • Gear Motors • Wound-Rotor Motors • Synchronous Motors • DC Motors

Fax to:

• DC Motors - Crane and Mill • Adjustable Speed Drives • Generators - AC and DC • Engine-Generator Sets • Transformers, Single Phase

P.O. Box 2812 • Toledo, Ohio 43606

• Transformers, Three-Phase • Across/Line Magnetic Starters • Reduced Voltage Starters • Safety Switches • Phase Convertors

800-248-4479

www.rowelectrical.com 419-248-4479 rowelec@glasscity.net WE ANSWER THE PHONE 24 HOURS • WE BUY USED Electrical

419-244-8887

‘99 Daewoo 220 Solar II

11000 hours, has heat and air! Daewoo inline 6 Engine 145hp. Computer works for the stroker. Tracks are around 11’. Stroke delimber is a Pro mark 50. Designed under the timberline, and has a timberline head. Has all maintenance records and extra parts! Great running machine! Location: Montana

Item ID: 12936 Contact: Chris Woods 800.315.9950 Ext. 600

2004 Ponsse Buffalo King Forwarder Many updates!!

Item ID: 13151 Contact: Tom  Ph: 800-315-9950 x604

www.LBXonline.com

www.LBXonline.com 4050 hours on this gem! Extremely well maintained. Very Good Condition. Undercarriage at 80%. 360 rotation on head. New 12 tooth disc on saw. New main pump. New radiator. New water pump. New Pro Heat just added. Many other updates. VERY NICE MACHINE! Ready to work. SN FT4C-2002. - Item ID12486 - Tom 800.315.9950 ext. 604 2001 Timbco 820D Forwarder - 2001 Timbco; Model TB-820-D; Serial #TB154-012901. Hour meter reads 7075 20 n

but actual hours are about 9500. Brand new Cummins 260 HP Engine with Cummins Warranty 1.5 hours on engine. New Coupler between Transmission and Engine. New Pivot pins and Bushings. 360 degree Supergrip Grapple. One Set Log Bunks. One Set Tracks - Item ID-13094 - Tom 800.315.9950 ext. 604 2001 Valmet 860.1 Forwarder - 6 Wheel Drive. Chains for most tires. 17,000 hours. Runs good and is working today. Owner is upgrading. - Item ID-12867 - Tom

The Original Lumberman’s Exchange

‘08 JD 648G III

Reduced! Approx. 10,600 hrs., 5,000 on engine; new fan belt, idler pulley, & more

Item ID: 13009 Contact: Sam  Ph: 800-315-9950 x603

www.LBXonline.com 800.315.9950 ext. 604 2002 New Holland TV140 w/10’ Brush Cutter - Only 3000 hours. Very well maintained. Brush Cutter has less than 500 hours. Complete with winch and forestry package. Tires at 80%. Comfort cab with great visibility. Extremely productive and stingy on fuel. - Item ID-12414 - Tom 800.315.9950 ext. 604 2002 Tigercat 845B w Quadco Hot Saw - 8500 hours on machine. About 3200 on new Cummins engine. Quadco head has 40 degree tilt and new saw blade. Tracks at 60%. Rebuilt 2 years ago. Well maintained. Heat and A/C

in cab. - Item ID-12751 Tom 800.315.9950 ext. 604 2002 Timbco 425D w/ Fabtek Proc. Head Very nice machine and well maintained. 11,229 hours, but only 1400 on recon Cummins engine. 24” Single Grousers. Undercarriage is 70%. Fabtek has been rebuilt and updated to make it stronger than new. Head works great. - Item ID12659 - Tom 800.315.9950 ext. 604 2002 Timbco 445D w/22” Quadco Hot Saw - Only 2400 hours on Upper which was replaced after burning at 2000 hours. Total hours on lower undercarriage is 4400 and has been rebuilt. 70% life left on lower. Customer has rebuilt the engine with a new cylinder head, pistons, rings,bearings,gaskets, and fuel transfer pump with only 700 hrs. on rebuild.. Unit has a new saw disc on the 22” Quadco Hot saw with 360 degree wrist... Main boom to stick boom pin and bushings have been replaced in a the last

Visit us online at www.LBXonline.com!

3 months and saw pump was installed about a year ago. THIS IS ONE OF THE CLEANEST 2002 MODELS YOU WILL FIND AT THIS PRICE! - Item ID-12541 Tom 800.315.9950 ext. 604 2002 Timberjack 608s with hot saw - 2002 Timberjack 608s with hot saw, approx. 6000 hours, Machine is in very good shape and has been well maintained. - Item ID-12194 - Sam 800.315.9950 ext. 603 2003 Cat 533 Hot Saw FB - 2003 Cat 533 Hot Saw FB. 7500 hours. 28L tires at 70%. Working today. - Item ID-13080 - Tom 800.315.9950 ext. 604 2003 Franklin Q70 Grapple Skidder - 2003,Model Q70M31A,Enclosed Cab W/ Heat & A/C,28Lx26 Tires 85% Rear,70% Front , 100 Hours On Dealer Rebuilt

1989 JD 540D Cable Skidder Item ID: 13146 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

Transmission, 600 Hours On Cummins Recon Engine 6BTA 200 H.P. Winch and Grapple. Excellent one owner machine! - Item ID12337 - Tom 800.315.9950 ext. 604 2003 Franklin Q80 Grapple Skidder - 7500 hours, but just 5000 hours on reman engine. New Radiator; New Hydraulic Pump; Comfort cab with good working

‘97 Ford L9000 Log Truck

John Deere 440B Cable Skidder

Item ID: 12602 Contact: Sam 800.315.9950 x603

Item ID: 12644 Contact: Sam Ph: 800-315-9950 x603

www.LBXonline.com

heat and air; Tires at 80%. - Item ID-12450 - Tom 800.315.9950 ext. 604 2003 Hydro Ax 670 with Bunching Head - Super nice machine with ONLY 1600 hours! 30.5 tires at 90%. Cummins 6BT8.3 engine. AC/Heat. Side pocket style head. Jewel of a machine! - Item ID-12729 Tom 800.315.9950 ext. 604 2003 JD 648GIII Dual

Arch Grapple Skidder - Refurbished 2003 JD 648GIII Dual Arch Grapple Skidder with approx. 8000 hours. 30.5 x 32 tires at 50% or better. The machine is dual arch w/reman arch, boom, grapple, engine and transmission. The machine also has had the normal repairs of: resealed all cylinders, pins and

For Classifieds Call Your LBX REP at 1-800-315-9950

April 2014 n 21

‘01 Sterling Clean-up Truck w/Serco Loader

Item ID: 12600 Contact: Sam 800.315.9950 x603 www.LBXonline.com

Hyster 70 XL2 Forklift bushings, center pins, cradle and addressed all electrical issues. Any potential problems were found and fixed or replaced. Limited Power Train Warranty. Can exchange existing tires for new and receive credit on existing tires against new tire price. Ex: add new 30.5 x 32 tires for $14,000. - Item ID-12905 - Tom 800.315.9950 ext. 604 2004 Barko 495 Loader w/Delimber - 2004 495 Barko ML. 11000 Hrs. New Turntable Bearing. Upper and Lower Valves Resealed. Both swing motors resealed. New pins and bushings in main and jib boom. CTR 450 Delimber. Cold AC. - Item ID-12897 - Tom 800.315.9950 ext. 604 2004 Cat 330C Log Loader 22 n

- 14,500 hours. New undercarriage on it, rebuilt the grapple, repacked boom cylinders, put in new air ride seat, new climate control system, and a few other things. Last year we pulled the engine out and went through it and also had the pump gone through. Runs very well. Great Value! - Item ID-12686 - Tom 800.315.9950 ext. 604 2004 Cat 535B Grapple Skidder - SIN AAE00566, 12,000 hours. Replaced center pins, repacked cylinders, and repaired hydraulic control valve for grapple. 73 x 44, 32 tires- Runs good. Priced to sell! - Item ID-12693 - Tom 800.315.9950 ext. 604 2004 Fabtek 133 Harvester - 11,400 hours. One owner machine. Very nice condition. Fabtek 4

The Original Lumberman’s Exchange

Item ID: 12607 Contact: Sam 800.315.9950 x603 www.LBXonline.com

Roller processing head. Pro Heat cold weather start system. One track is brand new. Working today. Customer shutting down job. - Item ID-12950 - Tom 800.315.9950 ext. 604 2004 Franklin Q80 single arch grapple skidder with winch - 200 HP Cummins engine Powershift transmission Comfort cab with working heater and AC New Manifold gasket and bolts New muffler New grapple head New shifter box Tires 85% 28L X 26 Good Solid Machine- Runs great! - Item ID-12843 Chris 800.315.9950 ext. 600 2004 JD 748GIII Grapple Skidder - 2004 JD 748GIII. Good running condition. Well maintained by one

‘99 Timbco 425D Harvester w/Keto 800 Item ID: 13150 Contact: Tom  Ph: 800-315-9950 x604

www.LBXonline.com

‘05 TimberPro 830TF Forwarder Item ID: 13161 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

owner. 14,800 hours. 35.5 tires at 40%. Extra set of 50” flotation tires to be included. Working on job today. Dual Arch Grapple. Winch. Heat and AC. - Item ID-13076 - Tom 800.315.9950 ext. 604 2004 John Deere 700H LGP - This machine has 1987 hrs on a crate motor. Very Strong running machine. Being used daily! Limb Risers, screens, 6 way blade, 30” pads. - Item ID13035 - Chris 800.315.9950 ext. 600 2004 Log Max 9000 Proc. Head - 2004 Log Max 9000. Good running condition. Rebuilt every year. Many

Visit us online at www.LBXonline.com!

When You Buy Your Circular Saws From B.H. Payne You’ve Bought the best... We Guarantee It! Traditional Quality Combined With Todays Technology Quality Brand Reg. U.S. Pat Off

Circular Saws Saw Bits and Shanks Circular Knives Carbide Tipped Saws Carbide Strobe ® Saws B.H. Payne & Company Saw Manufacturers

‘89 Timberjack 380 Grapple Skidder Pulling Logs Now! Item ID: 13143 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

spare parts. Computer included. Super Value! - Item ID-12929 - Tom 800.315.9950 ext. 604 2004 Ponsse Buffalo King Forwarder - 2004 Ponsse Buffalo King Forwarder. 18 ton capacity. S/N 120001, 2 part extendable K100 loader. (1) new 750/50x26.5 tire Nov ‘13, (2) tracks rebuilt Nov 2012, (1) track rebuilt Nov 2011, (1) track new Nov 2011, Hydrostats replaced 2010; New centerpin Nov 2011; New front diff; all planetaries and bogies inspected; Nov 2011. Hyd Pump replaced 2010; Loader hoist and stick cylinders repack/ repaired Dec 2014; Drop box replaced 2010; New radiator June 2012. Approx 23000 total hours. Timbco clambunk attachment with all plumbing made to attach to Ponsse frame (needs clamps) - Item ID13151 - Tom 800.315.9950 ext. 604 2004 Ponsse Wisent - Very

‘81 JD 850 Grapple Dozer

Running Today! Item ID: 13149 Contact: Tom  Ph: 800-315-9950 x604

www.LBXonline.com nice machine. Many recent updates such as new batteries and alternators. Tight and dry and working today. 13,000 hours. 8 wheeler that includes Eco Tracks for rear bogey. Tires at 70%. - Item ID12856 - Tom 800.315.9950 ext. 604 2004 Tigercat 240B Log Loader on Trailer - Very clean. One owner machine. Good maintenance. Tight and dry. 7800 hours. Brand new engine just installed! Planetary gears on swing just replaced. New main hyd. pump. Loading logs now. Cummins 5.9. - Item ID-12617 - Tom 800.315.9950 ext. 604 2004 Trail King belt trailer - 2004 Trail King belt trailer. 4690 rated at 78 yds. The trailer is in great shape for its age. It has a shurco roll over tarp that will need attention but is in working order. The one piece belt is in great shape, no tears or rips

Call 800 752-0627

Make Sure To Ask For Our Free, Complete Saw Catalog We Manufacture & Sell Inserted Tooth Headsaws, Solid Tooth Saws, Inserted Tooth Cutoff Saws & Carbide Saws. We also Stock & Sell Bits & Shanks, Carbide Tips, Diamond Wheels, Knife Grinding Wheels, Saw Gumming Wheels & Knives.

Here’s What You Get With Every B.H. Payne Saw • Saws manufactured from only the Highest Quality Nickel Alloy Steel. • Each Saw Milled with State-Of-The-Art Precision CNC Milling Machine. • We Tension Your Saw to Your RPM Speed BEFORE Leaving Our Factory. • Your Satisfaction - Completely Guaranteed.

B.H. Payne & Company, Inc. P.O. Box 90608 East Point, GA 30364 404 761-8711 Fax 404 761-5398 “Since 1890” E-mail: info@paynesaws.com

Web Site: www.paynesaws.com

and operates flawlessly. Trailer will be sold as-is for 30k. Also all 8 tires are near new and just passed a DOT inspection station in feb. - Item ID-13173 - Sam 800.315.9950 ext. 603 2005 Barko 595 Loader on SP Carrier - 2005 Barko 595ML Loader on Big John Self Propelled Carrier. Carrier is towable. Unit has 7900 Hrs. Equipped with Live Heel and continuous rotation grapple. Has JD 185HP engine. Has Cab Riser with Tilt Option for easy transport. - Item ID-12912 Tom 800.315.9950 ext. 604 2005 Ecolog 580B Harvester - Ecolog 580B Harvester with Log Max 7000 Processing Head w/Steel Rollers. Very good running condition. S/N 240. 7700 hours.

Recent updates include: New water pump; New implement pump; New swing motor; New hydraulic oil cooler and oil cooler bypass valve. It has a DASA4 control system and ICAN monitoring system. Rear bogeys are 650 size and include one set of tracks. Engine is Cat 3126. Equipped with a Wabasto preheater. Machine is factory reconditioned by Ecolog. Center section and bearings are new. - Item ID12826 - Tom 800.315.9950 ext. 604 2005 JD 748GIII Grapple Skidder - 2005 JD 748GIII Grapple Skidder. Working every day. 11,500 hours. Heavy duty Sweda Axles. 35.5 tires at 60%. Winch. Dual arch grapple. New transmission at 8000

For Classifieds Call Your LBX REP at 1-800-315-9950

April 2014 n 23

LBX In-house Financing Now Has Money Available! Were you recently declined for funding?

We can help! If you answer YES to any of these questions:

1 Do you have more than two months in business? 2 Do you have a FICO Score of 500 or greater? 3 Do you have at least $100,000 in Annual Sales?

You Qualify!

FCP was founded on the principle that investing in good business is still good business. Accordingly, our focus is providing multiple capital procurement options for small- and medium-sized business owners. FCP offers both traditional and non-traditional financing options, including: Small Business Loans, Merchant Cash Advances, and Equipment Leasing. Backed by 2 billion dollars in assets, regardless of your financial needs, FCP can deliver. Your credit score is a picture of your past, at FCP we invest in your vision of the future.TM

Get approved and start building your future today! • • • • • •

Equipment Purchase or Leasing Purchasing inventory Facility expansion Hiring additional employees Launching a marketing campaign General working capital

LBX

Financing Don’t Wait to invest in your future, Call Today!

Empowering small business owners to live the American dream—one client at a time!

(800) 315-9950 x603 24 n

The Original Lumberman’s Exchange

hours. Recent engine work. - Item ID-13077 - Tom 800.315.9950 ext. 604 2005 JD 748GIII Grapple Skidder - 2005 JD 748GIII in good running condition. 8900 hours. 2005 Hrs: 8900. Rebuilt engine by local Deere dealer at 7500 hours. 66 x 43 tires. 80% front: 60% Rear. Winch works well. Dual arch grapple. Priced to sell! - Item ID-13058 - Tom 800.315.9950 ext. 604 2005 Komatsu D39 PX Dozer - Approx. 2150 hours, 6-way dozer, canopy, joystick controls, limb risers 25" pads, SBG, new hydrostats and pumps Undercarriage 75%, condition good to very good - Item ID-12994 - Tom 800.315.9950 ext. 604 2005 Morbark Model 2755 Flail/Chipper - S/N = Q78. Hours = 6500. Tires: 295/75R22.5. (Two) Cat engines: Model 3412 in front with 860HP: Model 3406 in rear with 425HP. Originally came out as a 3 flail converted to a 2 flail debarker. Handles up to 30” whole trees. Set up for 2” chips. Recently came off job. Well maintained and in good condition. - Item ID12690 - Tom 800.315.9950 ext. 604 2005 Prentice 280 TMS Good running machine. Hour meter shows less than 2000 hours but owner believes it to have about 6000. Machine serial number is PR59771. Unit has Cummins engine and runs good with no blowby and has no leaks and is tight Dependable machine that is priced right with the market. - Item ID-12527

Visit us online at www.LBXonline.com!

Now One Phone Puts You in Touch with the Single Source for all your Sawmill Needs! ‘05 Western Star w/’09 Lemco 75XLT Loader Item ID: 12598 Contact: Sam 800.315.9950 x603

www.LBXonline.com

Complete 3-Head Block Helle Sawmill

Priced to sell! See more photos online!

Item ID: 12605 Contact: Sam 800.315.9950 x603 www.LBXonline.com

The Most Complete Line of Sawmill Machinery Since 1905! Single Machine or Complete Turn-Key Operation More Production & Profit is Only One Call Away For Parts, Service & Sales

mfg

Call (423) 698-0284 CORLEY Timberjack 230 Cable Skidder Item ID: 13144 Contact: Tom  Ph: 800-315-9950 x604

www.LBXonline.com - Tom 800.315.9950 ext. 604 2005 Takeuchi Supertrack Skid Steer with B74 Fecon Head - 981 Hours. 102 HP Engine. New Tracks. Fecon B74 Mulching head with new teeth. Winch. Comes with spare 80” bucket. Half the price of new. - Item ID12413 - Tom 800.315.9950 ext. 604 2005 Tigercat 718 FB w/5500 Saw Head - Very well maintained machine with 9400 hours. Dry and tight. 28L tires at 60%. Running good today. AC blows cold. Heat works great. Center section tight. - Item ID-12939 - Tom 800.315.9950 ext. 604 2005 Timberking TK360

Carriage Linear & Set Shaft Lewis Controls “Electronics for sawmills by sawmillers” Tyrone-Berry Carriage Drives & Parts • Headrig Slabbers Log Turners • Bandmills & Linebar Resaw Systems Board & Gang Edgers • Trimmers

Item ID: 13122 Contact: Tom  Ph: 800-315-9950 x604

www.LBXonline.com

1997 Ford Tree Trimming Truck

Corley Sawmill Machinery Tyrone Berry Carriage Drives Lewis Controls Optimization

Feller Buncher - 2005 Timberking TK360 Rubber tired feller buncher, good condition 9023 hours, new A/C. 22" high-capacity head w/side cutter put on at 5000 hours. Front tires at 75%, back tires 50% - Item ID-12995 - Tom 800.315.9950 ext. 604 2005 TimberPro 830TF Forwarder - 6580 hours. Very good condition. Tracks for all bogies. 710/45-26 tires at 70%. Includes bolsters and back rest. Comes with 36” grapple with grapple saw option. Set up with harvester hydraulics according to owner.

www.corleymfg.com • sales@corleymfg.com

- Item ID-13161 - Tom 800.315.9950 ext. 604 2005 Valmet 860.1 8-Wheeled Forwarder - 13,800 hours. New hydraulic transmission and gear box. $70,000 of updates just completed by local Valmet/Komatsu Dealer. Spare pump ($7,000 value) Good running condition. Sisu engine uses 4 gal/hour. 16 ton capacity. Tracks for front and back. Front blade. Hood guard. - Item ID-12267 - Tom 800.315.9950 ext. 604 2005 Valmet 941 Harvester - Totally refurbished head to toe! Very good running condition. Over $50,000 in recent updates and maintenance. New center pin bushings; new bogey seals; valves resealed; all cylinders packed. 10,200 hours. Largest of rubber

For Classifieds Call Your LBX REP at 1-800-315-9950

tired harvesters. Has Valmet 370.2 processing head with less than 4000 hours. Tracks included for bogeys. Has spare 370.2 head for parts. Engine runs well. Tires at 50%. This is a hard to find gem and priced below market. - Item ID-12569 - Tom 800.315.9950 ext. 604 2005 Valmet/Timbco 415 Harvester with 370E Head Very nice unit. 7400 hours. 370E Harvesting head just added 22 months ago and only has 2000 hours. 36” Triple Grouser tracks at 60%. Sisu engine that is very stingy on fuel. 8’ squirt at end of boom for 30’ reach. Reversible fan and auxiliary oil cooler. - Item ID-12266 - Tom 800.315.9950 ext. 604 2006 Hydro-Ax, Model 764 w/ AX1910 Mowing Head April 2014 n 25

Safety� Safe Durable� Durable

(262) 673-6801 Local

Comin gS 4 New oon Mode ls

Made inA the US

The Firewood Factory Lil’ Beaver Model Call for Free DVD

Starting at

8995

Beaver Model 18 Optional Features Available

Reliable� Reliable� Reliable

Convenience� Convenient

Features: • 1 to 2 plus full cords per hour (128 cubic feet) • Cuts up to 16” diameter and up to 20’ lengths • Splits wood up to 24” • Splitter cycle time 4-5 seconds • Honda Engine GX-390, Subaru 14hp or PTO driven • Super fast, Super Safe!

Call Toll Free

Nothing Eats Wood Like a Beaver 1-800-569-6813 www.woodbeaver.net | sales@rrsinc.net

‘96 Valmet 603 3-Wheeled Buncher

Item ID: 13155 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

2006 Hydro-Ax, Model 764 w/ AX1910 Mowing Head. 4700 hours. Cummins engine. 30.5 x 32 tires at 60% or better. Includes tire chains for all tires. Good running condition. Well maintained. - Item ID-12987 - Tom 800.315.9950 ext. 604 2006 JD 648GIII Grapple Skidder - 9400 hours on good running machine. Sweda Axles with 28L & 23.1 Duals. Winch. Recently rebuilt JD engine. Dual Arch Grapple. Heat 26 n

Late 80’s Case W20C Wheel Loader Item ID: 12606 Contact: Sam   800.315.9950 x603

www.LBXonline.com and AC. - Item ID-13088 Tom 800.315.9950 ext. 604 2006 JD 748GIII Grapple Skidder - 2006 JD 748GIII Dual Arch Grapple Skidder; 7200 Hours; New JD Transmission at 6500 hours; A/C and Heat work well; 30.5 x 32 tires @ 40%; No winch but has the controls in cab; Heavy duty Sweda axles. - Item ID-13120 - Tom 800.315.9950 ext. 604 2006 JD 848 Grapple Skidder - 6500 hours.

The Original Lumberman’s Exchange

‘06 TF 810 TimberPro Forwarder Item ID: 13114 Contact: Tom  Ph: 800-315-9950 x604

www.LBXonline.com Very strong machine. 35.5 Tires...3 at 50%, one at 90%. Dual rings on rims. - Item ID-13175 - Tom 800.315.9950 ext. 604 2006 John Deere 748GIII Dual Arch Skidder - 8900 hours. Good condition. Working today. One owner machine. Tight and dry. 32.5 tires at 50%. - Item ID12542 - Tom 800.315.9950 ext. 604 2006 Morbark 18 Hurricane Chipper w/Loader - Good running portable chipper equipped with loader. JD 6068 engine with 250HP. Hydraulic swivel Discharge

™�

1995 Prentice 210D Item ID: 12652 Contact: Sam    800.315.9950 x603 www.LBXonline.com

Chute; Tandem axle package, Hydraulic rear stabilizer, large hydraulic tank, loader platform with chair, loader. The chipper has been recently serviced by a certified Morbark dealer who installed new blades and anvils. The machine also has 2 new tires. - Item ID-12964 - Tom 800.315.9950 ext. 604 2006 Morbark 6600 Horizontal Grinder Approx. 6000 hours on this well maintained machine. Has New Cat Dealer Rebuild 1000HP Engine at 5000 hours. 42” X 66-5/8” HAMMERMILL; VARIABLE SPEED INFEED SYSTEM; HAMMERMILL DRIVE INCLUDES ALL BELTS, SHEAVES, BUSHINGS & SHIELDS. ENGINE GAUGE PANEL & EMERGENCY SHUT DOWN SYSTEM LOCATED IN AN ANTI-THEFT CONSOLE. ELECTRONIC RPM SENSOR & AUTO FEED SYSTEM. 430 GALLON FUEL TANK. 238 GALLON HYDRAULIC OIL TANK. IQAN CONTROL SYSTEM. DUST SUPPRESSION SYSTEM. HYD OPERATED DEBRIS CONTAINMENT DOOR. 16 FUNCTION RADIO REMOTE. SUPER PACKAGE!

Visit us online at www.LBXonline.com!

Sawmill Exchange 1989 Int’l Clean-up Truck w/2004 Serco 8000 Ldr. Item ID: 12601 Contact: Sam 800.315.9950 x603 www.LBXonline.com

3-Strand Green Chain 36’x8’ w/ Stops Item ID: 12596 Contact: Sam    800.315.9950 x603 www.LBXonline.com

North America's Largest Source of Used Portable Sawmills. Over 800 Ads:

Portable Sawmills, Commercial Sawmills, Pallet and Cutstock Manufacturing, Firewood Manufacturing, Chipping and Grinding, Trimmers, Debarkers, Dry Kilns, Edgers, Resaws, Ripsaws and Gang Saws, Loaders, Moulders and Planers, Sawdust Blowers and Chains, Conveyors/Transfers/Decks/Green Chain, Rolling Stock, and Much More!!

The Place to Sell Your Equipment Call Us for a Free List of Over 800 Ads or to Sell Your Equipment. Optional new knife skin $20,000 which is half price of new. - Item ID-12692 Tom 800.315.9950 ext. 604 2006 Peterbuilt Log Truck w/Loader & Pup - 2006 Peterbuilt log truck and Rosa aluminum crib pup trailer. Has Rotobec Model 80 elite loader. Cummings motor with 450,000 miles. Excellent shape. Hauling logs today. - Item ID-13018 Tom 800.315.9950 ext. 604 2006 TF 810 TimberPro Forwarder - 2006 TF810 Timber Pro Forwarder W/ Cold Weather Package Start. 6744 hours. 260 HP Cummins. One set tracks at 60%. 700/50 tires @ 60%. Very good running condition. - Item ID-13114 Tom 800.315.9950 ext. 604 2006 Tigercat 630C Grapple Skidder - Decking blade, new a/c installed, new hydrostats; Dual function grapple, 40K Allied winch; 30.5L32 tires, 3 @ 75%, 1 @ 20% Condition good to

very good, Approx. 6900 hours - Item ID-12996 - Tom 800.315.9950 ext. 604 2006 Tigercat 720D Feller Buncher - 2006 Tigercat 720D Feller buncher with New Cummins Engine, Enclosed Cab heat & air, 28.1 x 26 Tires, 5000 series sawhead. 7012 hours. Very good condition. S/N 7204313 - Item ID-12752 Tom 800.315.9950 ext. 604 2006 Valmet 890.3 Forwarder - Well maintained 20 ton forwarder by Valmet. Has 13,700 hours. Very good running condition. Front hood guard and two complete sets of tracks included. Located on West Coast. Priced to sell! - Item ID-12709 - Tom 800.315.9950 ext. 604 2007 Bandit Model 3680 Beast Grinder - 2007 Bandit Model 3680 Beast Grinder; Only 780 confirmed working hours; 700HP C-18 CAT Engine; Twin

800-459-2148 (

)

US & Canada

www.sawmillexchange.com P.O. Box 710930 • Houston, TX 77271

Disc Hydraulic Clutch; Air Compressor; Reversible Fan; Remote Control; IQAN Controls; Magnetic head Pulley; Excellent condition! - Item ID-12628 - Tom 800.315.9950 ext. 604 2007 CTR 950B Grapple Skidder - Excellent Condition. Only 3500 hours. Single arch grapple. 30.5 x 32 tires at 60%. Heat/AC/Stereo in Cab. Cummins 6 cyl. engine. Just a great value! CTR was owned by Prentice, and is now supported by CAT Dealers. - Item ID-12664 Tom 800.315.9950 ext. 604 2007 Dodge Service Truck - 2007 Dodge Service Truck with 5.9L Cummins. This is the last of this kind of engine. Includes tools, fuel tank, spare parts, and air compressor. Super

For Classifieds Call Your LBX REP at 1-800-315-9950

Package! - Item ID-12910 Tom 800.315.9950 ext. 604 2007 Fecon FTX440 w/ Fecon BH 350 Mulcher - 2007 Fecon FTX440 w/ Fecon BH 350 Mulcher; Totally rebuilt in 2009 by Fecon with all 2009 updates. 1670 hours. Cat 440 HP Engine; Heavy Duty Winch; Triple grouser high flotation tracks; Excellent condition. Priced to sell! - Item ID-12632 - Tom 800.315.9950 ext. 604 2007 Hood Model 182 Loader on Carrier w/ Slasher - Super Clean Hood Model 182 Loader mounted on Hood selfpropelled and towable carrier. Includes Hood circle saw slasher package. Approx. 6700 hours. Excellent running condition. Hard to find April 2014 n 27

wanted

Older John Deere 648GIIIs & 748GIIIs

Bell Ultra C Feller Bunchers

We have buyers looking!! Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

‘05 Kenworth T-800 w/Rotobec MT27 Loader loaders equipped like this. AC and Heat inn Cab. Joystick controls. JD 6068T engine. Includes $600 in filters for complete servicing. - Item ID-13082 Tom 800.315.9950 ext. 604 2007 Lamtrac 6125 Tracked Mulcher - 2007 Lamtrac Model 6125 Tracked Mulcher. Purpose built. 125hp Cummins engine. Only 1336 hours. Purchased brand new in April 2012. Tracks at 50%. Includes winch. Full protection comfort cab with AC/Heat. Compare to new at $155,000. - Item ID12909 - Tom 800.315.9950 ext. 604 2007 Liebherr A924 Log Loader - 2007 Liebherr A 924 Rubber Tired Log Loader. 9300 hours. Good running condition. Hydraulic raising cab. 28 n

Rotobec Grapple. Approx 42’ reach. - Item ID-13154 Tom 800.315.9950 ext. 604 2007 Liebherr A924B Wheeled Log Loader 10,100 hours. Very Good Condition. Liebherr makes the highest quality heavy equipment in the world. This unit can go another 20,000 hours. 44’ reach with over 7000 lb capacity at 40’. Hydraulic raising cab for 16’ 8” operator eye level. Front blade for pushing or cleaning road debris. Grapple NOT included. Travels up to 12.5 mph with variable speed hydraulic transmission. Super smooth hydraulics make this a great wood yard machine. - Item ID-12503 Tom 800.315.9950 ext. 604 2007 Log Max 7000 Processing Head -

The Original Lumberman’s Exchange

Item ID: 12612 Contact: Sam Ph: 800-315-9950 x603

www.LBXonline.com

Super Clean unit that includes the top saw option. Designed for quality processing. Dual tilt cylinder option. Includes the Log Mate 400 computer system for accurate measuring. Also includes rotator. Approx. 4800 hours on head. Wheel motors like new. Dry and tight. Ready to work. - Item ID-12885 - Tom 800.315.9950 ext. 604 2007 Morbark 22 RXL 1000HP Chipper - 8000 hrs. Cummins 1000 HP Engine runs strong. Just replaced feed tray, end spout, belly liners, hood liners, and one pump. Machine overall is in very good condition. S/N 2043. DISCHARGE

Both Track & Rubber tired! We have buyers looking! Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

2003 Manitou 523 Item ID: 12604 Contact: Sam 800.315.9950 x603

www.LBXonline.com SYSTEM: Dirt separator with deflector Hydraulic swivel/telescoping discharge spout. CHIPPER: 22” diameter chipping capacity, 75” diameter four-knife chipper disc with Left Hand rotation Chip sizes: 5/8”, 3/4”, 7/8”, 1”, 1-1/4”, 2”. Hydraulic chipper hood for easy knife access. 30 ft. x 10 ft CAT chain infeed bed. Enclosed weatherized operators’ cab is mounted on rubber shock absorbers with combination air conditioner/heater. Tilts hydraulically for transport. Six-way adjustable seat and joystick controls. Morbark 1000 knuckle boom loader,

Visit us online at www.LBXonline.com!

Integrity • Precision • Quality • Value

Woodmaster

‘92 Hood 24000 Slasher on Carrier

See why we are your Best Source for bandsaw blades!

Really nice package! Item ID: 13142 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

25 ft reach, 210 degree swing. By-pass grapple. Lift capacity of 20,000 lbs. at 10 ft. OPTIONS: reversing fan, twin disc clutch; Electronic RPM sensor with automatic back feed; 11 hp Quincy air compressor; Pre lube on engine while starting. - Item ID-12449 - Tom 800.315.9950 ext. 604 2007 Morbark 2355 Flail Chip Harvester - Three knife, three flail machine. New long block engine installed in September of 2011; About 5600 hrs on it now. Total hrs on the unit are approx 11,000. Also, there is an extensive parts inventory and a knife grinding machine (with knives) that can be purchased separately with machine. A well maintained machine that was working well up to being shut down at end of job. - Item ID-13134 - Tom 800.315.9950 ext. 604 2007 Peterson Model 4800E Portable Debarker - Good running machine and very well maintained. 9950 hours approximately. CAT 3306 Engine. $40,000 in recent maintenance with records from owner.

‘08 Ponsse Elephant Forwarder

We offer the highest quality welds and our people use the highest level of integrity and precision to give you the best bandsaw blades in the business—we ship all over the US. Satisfaction always guaranteed!

Thin Kerf

Band Saw Blades

18-ton Capacity!

Item ID: 13163 Contact: Tom  Ph: 800-315-9950 x604

Ask About Our Dismanteling Blades

www.LBXonline.com Great unit for making clean chips. - Item ID-12941 Tom 800.315.9950 ext. 604 2007 Prentice 384 TMS Loader Package - 2007 Prentice 384 t/a trailer mounted log loader Cummins 6-cyl engine. New injectors and pumps in Jan '13. New a/c installed, 32' length boom. 2006 John Evans trailer with 75% 11-22.5 tires. Includes CTR Delimber. Condition is good - Item ID12997 - Tom 800.315.9950 ext. 604 2007 Tigercat 630C Skidder - Very clean unit. S/N on request. Tires at 60%. 6519 hours. Big capacity grapple. Tight and ready to work. One owner machine. - Item ID-12275 - Tom 800.315.9950 ext. 604 2007 Tigercat 718E Feller Buncher - 2007 Tigercat FB with 5000 Bunching Saw Head. 8900 hours. Very well maintained. Good running condition. Cummins engine. Tight and dry. 28L x 26 Tires at

ck Cheut Our O

1-888-857-5153

Quality • Our Service • Our Price

50%. 1000 hours on rebuilt engine. - Item ID-12989 Tom 800.315.9950 ext. 604 2007 Valmet/Komatsu Model 911 Extreme Harvester - Only 4000 hours on this special machine. Has new Log Max 6000 added in 2013. Individual tracks on each hub allow this machine to climb where NO OTHER MACHINE can go! 4 New 700 tires and rims come with it for rubber tired operation. Recently gone through and updated. Very unique and hard to find a machine like this! Priced well below market. Sold new without head in 2008 for $575,000! - Item ID12571 - Tom 800.315.9950 ext. 604 2008 CTR 450 Delimber - Like new. Used for less than 100 hours. Paint still on unit. Compare

For Classifieds Call Your LBX REP at 1-800-315-9950

to new 450 at $34,000. No description needed. Consider like new. Item ID-12900 - Tom 800.315.9950 ext. 604 2008 Dynamic 585 Cone Head Chipper - S/N 5019. John Deere 500 HP engine. Only 861 hours. New knives and anvils. Wear liners, discharge chute, fan blades on drum have all been updated and replaced approximately 200 hours ago. Hand held remote control. Triple chain feed deck. Produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. - Item ID12694 - Tom 800.315.9950 ext. 604 2008 JD 2054 Log Loader - 15,000 total hours, but 9000 estimated working hours. New Undercarriage April 2014 n 29

Jackson Shavings Mill REduced

2005 Jackson Shaving Mill, Model: 16 4D Mill is powered by a 3-phase, 30 hp motor; Hydraulic powered by a 3-phase 30 hp motor; The box was upgraded for hydraulic in place of chain driven; Comes with 6-sets of knives. Unit is in excellent condition! Comes with a Grizzly knife sharpener, conveyor, and forage box.

Forage Box

REduced

Conveyor

Item ID: 12795 Contact: Chris Woods 800.315.9950 Ext. 600

www.LBXonline.com except for tracks. 34’ live heel boom. Continuous rotation grapple. Cab Riser with tilt cab and guard. - Item ID-12967 - Tom 800.315.9950 ext. 604 30 n

2008 JD748 H Grapple Skidder - Good running machine. Used on job with three shifts so hours are 15,000. 43” flotation tires at 50%. Just finished

The Original Lumberman’s Exchange

‘06 JD 848 Grapple Skidder

‘11 JD 748GIII Grapple Skidder

www.LBXonline.com

Item ID: 13176 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

Item ID: 13175 Contact: Tom  Ph: 800-315-9950 x604

going through shop. All functions working well. - Item ID-13064 - Tom 800.315.9950 ext. 604 2008 John Deere 344J Only 900 Hours!! Great running condition, z-bar, 3rd valve, ride control, intake heater for cold weather starting, heat/ ac, stereo - Item ID-13034 Sam 800.315.9950 ext. 603 2008 John Deere 648G III It has around 10,600 hours. New engine installed at 5,000 hours. We repacked all 4 boom cylinders and the 2 grapple cylinders. All new rods were installed in these cylinders. A/C system (condenser) has been cleaned. Seat has been recovered. Brake valve resealed. New fan belt. New idler pulley. Hoses were changed as needed. This is a clean tight machine ready to work. - Item ID-13009 - Sam 800.315.9950 ext. 603 2008 Komatsu Model 220LL w/38’ Live Heel Boom - Only 2000 hours. Jewell purpose built Live Heel and 52” continuous grapple. 30” Double Grouser Pads: 4’ cab riser with hydraulic tilt; Cab guard; Exterior Cab Lights; Heat/AC; Running boards

Low Hours!!

for easy maintenance access. Excellent condition. Great yard machine. - Item ID-12634 Tom 800.315.9950 ext. 604 2008 Ponsse Bear Harvester - Just 6800 hours. Equipped with best in class Ponsse H8 harvesting head. Very well maintained. Mercedes engine very stingy on fuel. Eco tracks for bogies. Hood guard. Largest harvester on the market. Out produces any other rubber tired harvester for performance and capacity. - Item ID-12810 - Tom 800.315.9950 ext. 604 2008 Ponsse Elephant Forwarder - Ponsse Elephant Forwarder with 18 ton capacity. 8 Wheeled with ONE set of tracks with machine. Hood guard. 11,400 hours, working today. Machine will have gone through professional shop and will be painted to look new prior to sale. Has been professionally maintained. - Item ID-13163 - Tom 800.315.9950 ext. 604 2008 Ponsse Ergo Harvester - Very clean unit with just 8600 hours. Equipped with the advanced Ponsse H-7

Visit us online at www.LBXonline.com!

2007 Liebherr A924 Log Loader Priced to Sell!

Item ID: 13154 Contact: Tom  Ph: 800-315-9950 x604

www.LBXonline.com

Complete Kent 2-Head Resaw with Run around

Contact: Sam    800.315.9950 x603 www.LBXonline.com

2004 Hood 28000 Loader w/Hotsaw ‘96 Valmet 603 3-Wheeled Buncher Perfect for Thinning! Item ID: 13155 Contact: Tom  Ph: 800-315-9950 x604

www.LBXonline.com Head and C-4 Boom. One owner. Well maintained. Tracks for bogies. Superior Value - Item ID-13060 - Tom 800.315.9950 ext. 604 2008 Prentice 2210 Stationary Mount Loader - 2008 PRENTICE Knuckle Boom Loader - Model 2210SM; stationary electric; features joystick operation and 75hp electric motor; 440v. FOB: Georgia 8000 hours. Maintenance records available. Mill closed. Machine working well when mill ended operation. - Item ID-13017 Tom 800.315.9950 ext. 604 2008 Valmet 415 Harvester

Item ID: 11418 Contact: Sam 800.315.9950 x603 www.LBXonline.com

- Very nice machine. 5500 hours. Valmet 380 Processing head recently rebuilt and running good. 24” pads on 60% undercarriage. Heat and air work well. Sisu engine is stingy on fuel. - Item ID12866 - Tom 800.315.9950 ext. 604 2010 CAT D9T with Chip Blade - Cat D9T Dozer with wood chip arrangement. Back up Alarm. Product link; 27” tracks; 9SU Blade with edge group. Oil change system. Rear counterweight. - Item ID13152 - Tom 800.315.9950 ext. 604 2010 Fecon FTX440 w/ Fecon Model BH350 Mulching Head - Only 750 hours; Cat 440HP engine; Heavy Duty Winch; Triple grouser high flotation pads

at 95%. Like New! - Item ID12633 - Tom 800.315.9950 ext. 604 2010 JD 848H Grapple Skidder - 5000 hours. Running duals at this time. Powerful machine. Everything working great. Tires at 50% or better. - Item ID-12800 - Tom 800.315.9950 ext. 604 2010 John Deere 1110E Forwarder - Super Clean machine. 8 Wheeled. Only 5800 hours. One owner and well maintained. Hard to find them with low hours like this! - Item ID12947 - Tom 800.315.9950 ext. 604 2010 Prentice 2280 TMS Loader Package - Super clean loader/delimber package on trailer. Just 4400 hours. Cummins engine. CTR delimber works great. AC/Heat/

For Classifieds Call Your LBX REP at 1-800-315-9950

Radio in cab. Engine runs great with no blow by. Tight and dry. - Item ID12871 - Tom 800.315.9950 ext. 604 2010 Prentice 2670 w/ Single Post Saw Head Only 3199 hours. Cummins engine. 30.5 x 32 tires at 40%. Single post saw head. Great Value! - Item ID-12552 - Tom 800.315.9950 ext. 604 2010 Tigercat 630D Grapple Skidder - Super nice Tigercat 630D with 5589 hours. NEW 35.5 Firestones. Cummins engine. Dual Arch HD Grapple. Winch. Excellent condition. Runs great! - Item ID-12738 - Tom 800.315.9950 ext. 604 2010 Valmet/Timbco 445FXL w/Roy Saw Head 2010 Valmet 445FXL with HD Komatsu undercarriage at 50%. Just 5750 hours. April 2014 n 31

Reconditioned Electrical Equipment Saves You Money, Big Money! VFD Control

‘04 Timberking TK560 Loader w/ CTR450 Delimber Item ID: 12483 Contact: Sam 800.315.9950 x603

We Buy, Sell, or Rent— Used, Obsolete and Hard to Find Industrial Electrical Equipment

Many Items In Stock Ready for Immediate Shipment!

www.LBXonline.com Automatic Reduced Voltage Starter

All Sizes of Motors Manual Transfer Switch

Combination Starter

When you need it Now— And at the Best Price! You Need Weaver Electric Motor Control Starters (Solid State)

Disconnect Switch

Call Today!

Toll Free 800-257-0038

Ph: 303-288-0746 • Fax: 303-288-0218 6591 N. Washington, Denver, CO 80229 Web: www.weaverelec.com Email: spark@weaverelec.com

Many extras. Cold weather start. Deluxe heated seat. GN Roy Hi-Speed Disc Saw head with 360 degree rotation. Fire Suppression Pkg. Very good condition. Well maintained. - Item ID13023 - Tom 800.315.9950 ext. 604 2010 Woodsman 440TL Tracked Chipper w/ Loader - ONLY 1700 hours. Contractor finished job. 32 n

Operator controls entire operation from cab. 700 HP Cummins engine. 50” mill. High flotation 36” triple grouser pads on 80% undercarriage. Super Package. Sold new at over $500,000. - Item ID-12665 Tom 800.315.9950 ext. 604 2011 Builtrite Model 60 Stationary Loader - Model 60 Builtrite Stationary Electric Loader. New

The Original Lumberman’s Exchange

Condition with only 95 actual hours. The Model 60 has 18’ of reach and about 1,100 pounds of lift at full reach, with the grapple attached. The grapple is a ¼ cord, butt styled with gripping bars. It opens to 66” and is 20” wide. This package includes everything from the power pack to the comfort cab with head and AC. If you

have a loading challenge in your operation, this is an economical and quiet way to handle it. - Item ID12705 - Tom 800.315.9950 ext. 604 2011 Case TR320 Tracked Skid Steer Mulcher - 2011 Case Skid Steer with mulching head and bucket. Only 300 hours and in excellent condition. Skid Steer has Hi Flow option for maximum performance to head. - Item ID-13020 Tom 800.315.9950 ext. 604 2011 Fecon FTX100 w/ a BH74ssv mulcher head 233 Hours. Comfort cab with Heat/AC. 100HP Cummins engine. Total mulching package. Includes Fecon BH74 mulching head with 6’ cutting width. Priced well below dealer cost. - Item ID-12675 - Tom 800.315.9950 ext. 604 2011 JD 1010E 8-Wheeled Forwarder - Super Nice Machine! Just 2300 hours. Owner downsizing. Comes with new set of tracks and set of chains. - Item ID12955 - Tom 800.315.9950 ext. 604 2011 JD 748GIII Grapple Skidder - 4600 hours.

Visit us online at www.LBXonline.com!

BANDSAW BLADES

We have the most popular sizes in stock & ready to ship from major manufacturers, including…

We also offer expert Sharpening Services, plus…

Gang • Edger • Scragg Trim • Split • Strob …and

just about any Custom Saws you need to keep you cutting longer… for less!

Welded to your lengths! Call Marvin Miller for a quote 231-924-5953 • (fax) 231-924-6166 • 11606 Brickyard Rd. • Holton, MI 49425

Case 1150 Dozer

‘08 Ponsse Ergo Harvester

for Under $20K!

Wholesale Price!

Item ID: 13112 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

Item ID: 13060 Contact: Tom  Ph: 800-315-9950 x604

www.LBXonline.com

Good running skidder. 30.5 tires at 60% with dualing rings. Dual arch grapple. Heat/AC. Well maintained. - Item ID-13176 - Tom 800.315.9950 ext. 604 2011 JD 848H Grapple Skidder - Just 3200 hours. Excellent condition. Running duals for high flotation. Dual Arch. Winch. Comfort cab! - Item ID-12801 - Tom 800.315.9950 ext. 604 2011 Puma 612 Forwarder - with under 4000 hours. The machine has the new Barko 612 cooling package update + some other minor repairs. Volvo 220HP engine is very fuel efficient. 12,000 lb capacity. Comfort cab. Kesla Loader and Supergrip grapple. Very good running condition

- Item ID-13091 - Tom 800.315.9950 ext. 604 2011 Puma 612 Forwarder - Has new cooling system installed along with other minor repairs. S/N = F6121004110414. 3600 hours. Volvo 200HP Tier III engine. Tires: 28L x 26 front; Nokian 710/45x26.5 rear. All at 70%. Front Blade; 12,000 lb. capacity. Cab w/Heat and AC. Kesla Crane and Hultdins grapple. FOB: Rhinelander, WI. - Item ID-13092 - Tom 800.315.9950 ext. 604 2011 Remanufactured KMC Tracked Grapple Skidder - Model #42 KMC Model 2500P ( Dual Arch Grapple) Track Skidder. Cummins 6BTA (174 HP). - Clark 28000 Series Powershift Transmission. John Deere Model 40

‘08 JD748 H Grapple Skidder

Morbark 1200 Tub Grinder

Item ID: 13064 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

Item ID: 12919 Contact: Sam Ph: 800-315-9950 x603

Winch (40,000 lb line pull). Hydraulic operated controlled Steering Differential. Planetary Final Drives. - ESCO Dual Arch Grapple. - Fully enclosed Hi-Vis Cab c/w Heater, Air Conditioning, Lights, Swivel Suspension seat c/w Joystick Controls. - Pilot operated closed center Hydraulics. Sundstrand Sauer 45 Series Pump: - DanFoss Model L90LS 5 spool control valve - New. KMC Wear Resistant Tracks & Sprockets . Torsion Bar suspension. Heavy Duty Cast Steel KMC Road/Idler Wheels. Standard Decking Blade. FOB: BC, Canada INCLUDES ONE YEAR LIMITED WARRANTY!! - Item ID-12549 - Tom 800.315.9950 ext. 604

For Classifieds Call Your LBX REP at 1-800-315-9950

www.LBXonline.com

2011 Valmet 430FXL w/ Keto 870TS Proc. Head - 2011 Valmet 430FXL with Komatsu built undercarriage. Includes KETO Model 870TS Processing Head. Less than 3000 hours on total machine. Excellent condition. Head will have all updates according to owner. Compare to new at $600,000! - Item ID-13029 Tom 800.315.9950 ext. 604 2012 Log Max 7000C Processing Head - Only 865 hours. Like new condition. All components included such as Log Mate 402 computer and Super Grip handles. Ready to install on proper carrier. - Item ID13074 - Tom 800.315.9950 ext. 604 2012 Rayco Tracked Mulcher - 100hp Kubota April 2014 n 33

Real Tuff Baler&Baggertm Save $$$ on Bedding—Bale it Yourself! Electric or Diesel, Manual or Automatic

$15,905 Effective May 1, 2012

‘93 Timberjack 380B Tree Trimmer

REAL TUFF INDUSTRIES Manufactured by M & F Gauge & Specialty Co., Inc.

PO Box 693 Brownwood, Texas 76804 Phone: 325-641-8300 Fax: 325-643-3243

BUILT TO LAST www.realtuffbaler.com

Clear Roadways

Dear Prospective Customer,

Thank you for inquiring about our Real Tuff Baler! From baling wood shavings to aluminum cans, the Real Tuff Baler is built to last, and priced for a quick return on your investment!

Real Tuff Baler

Real Tuff Baler Dimensions & Specifications

• Easy to use

- (2) Hydraulic Cylinders are controlled by using a two spool valve

• Built of high quality materials and workmanship

- 30 H.P. motor (220/440 volt 3 phase) starter not included

• Heavy duty to enable a broad spectrum of baling options • Easily loads by conveyor or manual method

- 25 G.P.M. Pump - 50 Gallon reservoir capacity

. Easy to use

. Built of high quality materials and workmanship

- Only the highest quality industrial components are used

. Heavy Duty to enable a broad spectrum of baling options . Easily loads by conveyor or manual method Most Popular Baler Sizes

Real Tuff Industries Real Ruff Baler Size 12” x 16” x 36” 12” x 16” x 32” 11” x 17” x 36” 8” x 18” x 36” 5” x 10” x 16” - Call For Price

Bale Size

4.0 cubic foot bale 3.5 cubic foot bale 3.9 cubic foot bale 3.0 cubic foot bale 0.4 cubic foot bale

Bales per Hour

50 - 60 bales per hour 50 - 60 bales per hour 50 - 60 bales per hour 50 - 60 bales per hour 50 - 60 bales per hour

Phone: (325) 641-8300 Fax: (325) 643-3243 . Custom baler’s can be manufactured to your specifications .

Real Tuff Baler Dimensions & Specifications Manufactured by M & F Gauge Specialty Co., Inc. 2 - Hydraulic& Cylinders are controlled by using a two spool valve 30 H.P. motor (220/440 volt 3 phase) starter not included PO Box 693 • Brownwood, Texas 76804 25 G.P.M. Pump 50 Gallon reservoir capacity Only the highest quality industrial components are used www.realtuffbaler.com Real Tuff Baler Price: $12,997.00

Terms: 50% deposit upon receipt of purchase order. The blance is due upon completeion which will be approximately thirty days from placement of order. F.O.B. Brownwood.

Engine. Only 950 hours. 90% track life remaining Serial Number available. Great running condition. Owner leaving business. - Item ID-12908 - Tom 800.315.9950 ext. 604 2012 Refurbished FMC 210 Tracked Skidder - 1976 Model that was totally refurbished in 2012. No hours since updates were done. Includes warranty on machine and tracks. Detroit 6V53 engine with 195HP. Clark 28000 Powershift transmission. Clark 40,000 lb Winch. ROPS Cab. Includes bolt on grapple head with full function. New Paint. - Item ID-12731 - Tom 800.315.9950 ext. 604 ‘84 Eager Beaver Trailer - 9' wide by 48' long. Detached front, middle drop is 26 feet. Load from the front or 34 n

03/08

back. Tires and brakes are 80% sand blasted painted, everything goes, chains, binders, cones. Excellent condition. Located Southern NY. - Item ID13096 - Chris 800.315.9950 ext. 600 Case 1150 Dozer - OROPS Cab; 6-way Angle blade, Hyster winch; Limb risers; Serviceable Undercarriage. FOB: West Texas - Item ID13112 - Tom 800.315.9950 ext. 604 Cat 518 Grapple/winch Skidder - Late 80’s 4WD Drive; Cat winch, maintained machine.; 30.5 x 32 Tires, 95% rubber. 130-hp, all pins are good. - Item ID-12202 - Sam 800.315.9950 ext. 603 Cat D5B Dozer - Cat D5B s/n 22X380, direct drive, EROPS, S-Dozer w/ tilt.; Limb risers; Hyster Winch,

The Original Lumberman’s Exchange

Item ID: 13090 Contact: Tom  Ph: 800-315-9950 x604

www.LBXonline.com serviceable u/c - Item ID13113 - Tom 800.315.9950 ext. 604 Dorsey Drop Deck Trailer - 45’ Long. Heavy Duty Ramps. Good Michelin Tires. Currently in use and has carried (2) Cat 518 skidders with no problem - Item ID-12662 - Tom 800.315.9950 ext. 604 Extec Shredder - Item ID12926 - Sam 800.315.9950 ext. 603 2003 Franklin Skidder Model Q70-M31A, Enclosed Cab W/Heat & A/C, 28Lx26 Tires 85% Rear, 70% Front , 100 Hours On Dealer Rebuilt Transmission, 600 Hours On Cummins Recon Engine 6BTA 200 H.P. Excellent one owner machine! - Item ID-12152 Tom 800.315.9950 ext. 604 JD 643D Saw Head FB Decent machine. Estimated 1993 model. Serial number available for verification. Recent JD recon engine. Tires at 60%. Cameco Saw Head. Needs new teeth. AC works. Running today. Priced to move. - Item ID12845 - Tom 800.315.9950 ext. 604 Morbark 1200 Tub Grinder - Powered by a 3412 Cat

‘06 JD 648GIII Grapple Skidder Duals not included Item ID: 13088 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

engine, 600-hp. Tilt tub. Hours are unknown. - Item ID-12919 - Sam 800.315.9950 ext. 603 Timberjack 230 Cable Skidder - Older unit with 18.4x26 tires. Detroit 3-53. All functions work. Priced to sell. - Item ID-13144 Tom 800.315.9950 ext. 604

RECYCLING EQUIPMENT

2006 West Salem Machinery Brute Horizontal Grinder; Model 3456HB. This is a tier 2 machine and meets all current California emission standards. Equipped with a Cat 540 horse power C-15 diesel engine. This unit has been serviced and well maintained. It has approximately 8700 hours. The clutch and electronic brain have been recently replaced. Located in CA. Priced to sell!! - Item ID12691 - Tom 800.315.9950 ext. 604 1987 Morbark 27 WCL NEEDS MOTOR - 1987 Morbark 27 WCL, Morbark 1000 Knuckle boom loader, 3 knife disc, Newer discharge chute, New banding around disc, Brakes and tires are also OK, Everything works well Newer clutch -- with outboard bearing, Had

Visit us online at www.LBXonline.com!

Every Reputable Wide Band Supplier Offers

CAT D5B Dozer

Item ID: 13113 Contact: Tom  Ph: 800-315-9950 x604

www.LBXonline.com Cummins KTTA 750 HP engine -- needs repower - Item ID-12443 - Sam 800.315.9950 ext. 603 2001 Precision 23/66 Whole Tree Chipper One Owner: S/N 3310. Cat 3412E engine with 750HP s/n 4CR01701. New Injectors. Includes air compressor. Oil changed every 250 hours. 10,500 hours and runs like new. 3 axle trailer, California legal, rubber at 85%, and good brakes. Tows smooth. Equipped with Husky 175 loader. Has 3 knife disc with key knife system installed. Makes a super clean chip. Cab has heat and AC working well. Also has stereo radio and CB. New glass in loader. External chute controls. Super Clean! - Item ID12526 - Tom 800.315.9950 ext. 604 2005 Morbark Model 2755 Flail/Chipper, S/N = Q78. Hours = 6500. Tires: 295/75R22.5. (Two) Cat engines: Model 3412 in front with 860HP: Model 3406 in rear with 425HP. Originally came out as a 3 flail converted to a 2 flail debarker. Handles up to 30” whole trees. Set up for 2” chips. Recently came off job. Well maintained and in

‘10 JD 648H Grapple Skidder with Tracks! Item ID: 13015 Contact: Tom  Ph: 800-315-9950 x604

www.LBXonline.com good condition. - Item ID12690 - Tom 800.315.9950 ext. 604 2006 Morbark 18 Hurricane Chipper w/Loader - Good running portable chipper equipped with loader. JD 6068 engine with 250HP. Hydraulic swivel Discharge Chute; Tandem axle package, Hydraulic rear stabilizer, large hydraulic tank, loader platform with chair, loader. The chipper has been recently serviced by a certified Morbark dealer who installed new blades and anvils. The machine also has 2 new tires. - Item ID-12964 - Tom 800.315.9950 ext. 604 2006 Morbark 6600 Horizontal Grinder Approx. 6000 hours on this well maintained machine. Has New Cat Dealer Rebuild 1000HP Engine at 5000 hours. 42” X 66-5/8” HAMMERMILL; VARIABLE SPEED INFEED SYSTEM; HAMMERMILL DRIVE INCLUDES ALL BELTS, SHEAVES, BUSHINGS & SHIELDS. ENGINE GAUGE PANEL & EMERGENCY SHUT DOWN SYSTEM LOCATED IN AN ANTI-THEFT CONSOLE. ELECTRONIC RPM SENSOR & AUTO FEED SYSTEM. 430 GALLON FUEL TANK.

3 High Quality Swedish Steel 3 3” – 8” Band Width 3 16 to 20 Gage 3 Double Cut Options 3 Choice of Swage or Stellite

WOLVERINE

BUT ONLY THE BY MENOMINEE SAW GUARANTEES • Cutting Edge Plasma Welds • The Industry’s Highest Band Saw Capacity • Quick Delivery from our HUGE Inventory • Fast Sharpening & Exchange Program to Keep YOU Running • Competitive Pricing And ONLY Menominee Gives You Everything You need in a Wide Band Saw – Plus Expert Service from the Industry’s Most Knowledgeable Staff. Got a Wide Band Problem? Call Menominee Saw Today and You’ll Learn Why More Mills Trust the Pro!

TOLL FREE 1-800-582-0470 900 16th St., Menominee, MI 49858 Tel: 906-863-2609 Fax: 906-863-1147 Email: info@menomineesaw.com

WWW.MENOMINEESAW.COM 238 GALLON HYDRAULIC OIL TANK. IQAN CONTROL SYSTEM. DUST SUPPRESSION SYSTEM. HYD OPERATED DEBRIS CONTAINMENT DOOR. 16 FUNCTION RADIO REMOTE. SUPER PACKAGE! Optional new knife skin $20,000 which is half price of new. - Item ID-12692 Tom 800.315.9950 ext. 604 2007 Fecon FTX440 w/ Fecon BH 350 Mulcher - Totally rebuilt in 2009 by Fecon with all 2009

For Classifieds Call Your LBX REP at 1-800-315-9950

updates. 1670 hours. Cat 440 HP Engine; Heavy Duty Winch; Triple grouser high flotation tracks; Excellent condition. Priced to sell! - Item ID-12632 - Tom 800.315.9950 ext. 604 2007 Morbark 22 RXL 1000HP Chipper - 8000 hrs. Cummins 1000 HP Engine runs strong. Just replaced feed tray, end spout, belly liners, hood liners, and one pump. Machine overall is in very good condition. S/N 2043. DISCHARGE April 2014 n 35

The Richmond Show EXPO RICHMOND 2014

Richmond Raceway Complex * Richmond, Virginia Friday May 16th 9:00a.m. until 5:00p.m. and Saturday May 17, 2014 9:00a.m. until 3:00p.m. th The 34 East Coast Sawmill and Logging Equipment Exposition

EXPO RICHMOND 2014

Co-sponsored by Virginia Polytechnic Institute & State University Cooperative Extension and Virginia Forest Products Association

Return by April 1, 2014 to: EXPO RICHMOND 2014 • P. O. Box 160 • Sandston, VA 23150-0160 Please fill out completely and legibly. Incomplete or illegible forms can not be processed.

Your Name:

Nickname:

Company:

Title:

Address: City:

State:

Telephone:

FAX:

E-mail:

ZIP:

Country (if not USA): PLEASE CHECK ALL CLASSIFICATIONS OF INTEREST: -- (You must check at least one) G Dealer Sales G Paper/Pulp G Other (Please Specify) :

G Sawmilling G Logging G Pallet Production/Recycling G Equipment Manufacturer G Plywood/Panel

36 n

The Original Lumberman’s Exchange

Visit us online at www.LBXonline.com!

‘95 Barko 160B on Mack Truck Nice Package! Item ID: 13056 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

SYSTEM: Dirt separator with deflector Hydraulic swivel/telescoping discharge spout. CHIPPER: 22” diameter chipping capacity, 75” diameter four-knife chipper disc with Left Hand rotation Chip sizes: 5/8”, 3/4”, 7/8”, 1”, 1-1/4”, 2”. Hydraulic chipper hood for easy knife access. 30 ft. x 10 ft CAT chain infeed bed. Enclosed weatherized operators’ cab is mounted on rubber shock absorbers with combination air conditioner/heater. Tilts hydraulically for transport. Six-way adjustable seat and joystick controls. Morbark 1000 knuckle boom loader, 25 ft reach, 210 degree swing. By-pass grapple. Lift capacity of 20,000 lbs. at 10 ft. OPTIONS: reversing fan, twin disc clutch; Electronic RPM sensor with automatic back feed; 11 hp Quincy air compressor; Pre lube on engine while starting. - Item ID-12449 - Tom 800.315.9950 ext. 604 2007 Morbark 2355 Flail Chip Harvester - Three knife, three flail machine. New long block engine

‘04 JD 648GIII S/A Skidder New

Item ID: 13087 Tires Contact: Tom  Ph: 800-315-9950 x604

www.LBXonline.com installed in September of 2011; About 5600 hrs on it now. Total hrs on the unit are approx 11,000. Also, there is an extensive parts inventory and a knife grinding machine (with knives) that can be purchased separately with machine. A well maintained machine that was working well up to being shut down at end of job. - Item ID-13134 - Tom 800.315.9950 ext. 604 2007 Peterson Model 4800E Portable Debarker - Good running machine and very well maintained. 9950 hours approximately. CAT 3306 Engine. $40,000 in recent maintenance with records from owner.

‘79 Timberjack 240D Cable Skidder Inexpensive! Item ID: 13137 Contact: Tom  Ph: 800-315-9950 x604

www.LBXonline.com Great unit for making clean chips. - Item ID-12941 Tom 800.315.9950 ext. 604 2008 Dynamic 585 Cone Head Chipper - S/N 5019. John Deere 500 HP engine. Only 861 hours. New knives and anvils. Wear liners, discharge chute, fan blades on drum have all been updated and replaced approximately 200 hours ago. Hand held remote control. Triple chain feed deck. Produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8

For Classifieds Call Your LBX REP at 1-800-315-9950

Wanted: Bell Ultra C Feller Bunchers We have buyers looking for both track and rubber tired! Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

loads per day. - Item ID12694 - Tom 800.315.9950 ext. 604 2010 Fecon FTX440 w/ Fecon Model BH350 Mulching Head - Only 750 hours; Cat 440HP engine; Heavy Duty Winch; Triple grouser high flotation pads at 95%. Like New! - Item ID12633 - Tom 800.315.9950 ext. 604 2010 Woodsman 440TL Tracked Chipper w/ Loader - ONLY 1700 hours. Contractor finished job. Operator controls entire operation from cab. 700 April 2014 n 37

April 2014

Fecon Introduces New Depth Control Rotor

econ®, Inc. introduces the Depth Control Rotor system (DCR) brings a new level of performance and value to mulching, controlling the depth of bite and efficiently directing material flow so that energy is reserved for production. DCR cuts faster, delivering better fuel economy and more uniform particle size. The DCR system is an evolution that builds on Fecon’s reversible Samurai Knife Tool. Depth control rings of the DCR system work in harmony with the Samurai Knife to enable more cutting with less HP. The shape of the Samurai knife edge efficiently slices as it chips, providing greater forgiveness on rock than straight-edged tools or saw teeth. Depth control rings lend further impact protection to the tool body, and reduces shock loading to the mechanical or hydraulic drive line. DCR will be available in skid steer model mulching attachments and most PTO and hydraulic prime mover models in 2014. About Fecon: Fecon, Inc. was established in 1992 near Cincinnati, Ohio. Fecon’s Bull Hog is currently the #1 selling forestry mulcher. Fecon also provides track carriers and other equipment for vegetation management, geothermal, seismic, and wood to energy biomass industries. If you would like more information about Fecon or the Depth Control Rotor please call Courtney Shafer at 513-696-4430 or e-mail at cshafer@fecon.com

Press Releases

Morbark Debuts

Slow-Speed Shredder at CONEXPO

"If It's New, It's Here," proclaims the Association of Equipment Manufacturers of the CONEXPO/CONAGG trade show, and Morbark® does not disappoint on that score. Morbark, Inc., a leading manufacturer of durable, high-performance wood waste reduction equipment for more than 50 years, will debut an exciting new product at this year's CONEXPO show. Morbark partnered with its European dealer, OBMtec, to produce the Barracuda, a single-rotor, slow-speed shredder for markets outside of Europe. The Barracuda, developed by OBMtec and manufactured at Morbark's Winn, Mich., factory, offers a universal solution for industrial, C&D, wood and other waste streams, providing a high-quality end product with low operating, maintenance and fuel costs. "Adding the Barracuda shredder to our industrial product line allows our customers to easily expand their capabilities in C&D and industrial waste reduction," said John Foote, Morbark VP of Sales and Marketing. "Our ultimate goal is to make our customers successful, so the machine was designed for versatility and ease of maintenance. With high fuel efficiency and low operating and maintenance costs, combined with the versatility to process a wide variety of materials, the Barracuda provides exceptional value to our recycling customers." Key benefits of the Barracuda include: Ease of maintenance: The Barracuda is designed with serviceability in mind. All daily maintenance, such as

38 n

The Original Lumberman’s Exchange

cleaning the air filter, and checking and changing fluids, can be done while standing at ground level. Versatility: The Barracuda's ground-level adjustment door allows you to adjust grates in as little as 2 minutes, reducing downtime and increasing productivity. The counter knives can be repositioned to 5 different heights-higher for waste wood or lower for industrial waste-to give you the best end product for whatever you run through it. Available setup options from 20 to 40 hammers and counter knives give you multiple alternatives to find the right mix of speed, fuel economy, and output quality to best fit your needs. Low operating costs: The Barracuda's single rotor and bolt-on hammer inserts for reduced maintenance times, the internal rotor gearbox with high torque for greater fuel efficiency and large hydraulic reservoir for lower operating temperatures all play a part with the many other key features to reduce operating costs in this new design all to increase your bottom line! To get the first look at the Barracuda, visit Morbark in the Silver Lot at CONEXPO in booth #3491. About Morbark: Morbark, Inc., based in Winn, Mich., builds equipment that creates opportunities in the forestry, recycling, sawmill, bio-energy and tree care markets. Innovating and manufacturing durable, high-performance equipment for more than 50 years, Morbark offers a full line of whole tree and waste wood chippers, flails, brush chippers, horizontal and tub grinders, sawmill equipment, material handling systems and more. Morbark equipment helps customers harvest, process and convert wood and organic waste materials into valuable, useful and environmentally sound products. Visit www.morbark.com, "Like" us on Facebook or subscribe to our YouTube channel. Morbark Inc Press Release - Barracuda Contact: Deana Monahan Tel. 989.866.2381 Email: deana.monahan @morbark.com

Visit us online at www.LBXonline.com!

Wanted: Older JD648 GIIIs & 748 GIIIs We have buyers looking!

Contact: Tom  Ph: 800-315-9950 x604

www.LBXonline.com

‘99 Timbco 425 Valmet 500 Harvester Item ID: 13140 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com

HP Cummins engine. 50” mill. High flotation 36” triple grouser pads on 80% undercarriage. Super Package. Sold new at over $500,000. - Item ID-12665 Tom 800.315.9950 ext. 604 2011 Fecon FTX100 w/ a BH74ssv mulcher head 233 Hours. Comfort cab with Heat/AC. 100HP Cummins engine. Total mulching package. Includes Fecon BH74 mulching head with 6’ cutting width. Priced well below dealer cost. - Item ID-12675 - Tom 800.315.9950 ext. 604 2012 Rayco Tracked

Mulcher - 100hp Kubota Engine. Only 950 hours. 90% track life remaining Serial Number available. Great running condition. Owner leaving business. - Item ID-12908 - Tom 800.315.9950 ext. 604 Extec Shredder - Item ID12926 - Sam 800.315.9950 ext. 603 Morbark 1200 Tub Grinder - Morbark Tub Grinder Powered by a 3412 Cat engine, 600-hp. Tilt tub. Hours are unknown. - Item ID-12919 - Sam 800.315.9950 ext. 603

ROLLING STOCK

2005 Kenworth T-800 with Rotobec MT27 Loader One Owner Truck, 110,000 miles, 8LL Trans, 46,000 lb rears, Full locking rears, Factory double frame, 430hp engine - Item ID-

12612 - Sam 800.315.9950 ext. 603

SAWMILL

1984 Lane Model 8400 Saw Mill - Heavy duty four 14’ (4) head table w/ a top saw. Silvatech Set works and has 45-50 foot of track frame. Surprisingly good condition! Great Value at this price!! - Item ID-12689 Tom 800.315.9950 ext. 604 2006 Wood-mizer LT-40 super hydraulic - Item ID13105 - Chris 800.315.9950 ext. 600 2008 Challenger Grinder Model CHSP 200-4090 Like New Condition. Only 500 hours. 120HP - 3 phase electric motor. 2 sets of screens, 3/4 and 1”. Photos say it all. Machine runs great. Owner lost contract. This machine makes great animal bedding. - Item ID-

For Classifieds Call Your LBX REP at 1-800-315-9950

12284 - Tom 800.315.9950 ext. 604 Wood-Mizer LT-40 - Very nice Wood-Mizer LT-40. No leaks. Only needs muffler. Good working machine running today. - Item ID12982 - Sam 800.315.9950 ext. 603

SHAVING EQUIPMENT

Jackson 16 4D Shaving Mill - Jackson 16 4D Shaving Mill is powered by a 3-phase, 30 hp motor; Hydraulic powered by a 3-phase 30 hp motor; The box was upgraded for hydraulic in place of chain driven; Comes with 6 sets of knives This unit is in excellent condition! Comes with a Grizzly knife sharpener, conveyor and forage box - Item ID-12796 Chris 800.315.9950 ext. 600

April 2014 n 39

The Lumberman’s Exchange Post Office Box 1916 Columbia, Tennessee 38402

PRSRT STD. U.S. Postage PAID Permit No. 212 Pulaski, TN

Superior finished product control for biomass fuel, colored mulch, animal bedding, and other wood fiber commodities.

  

Electric or Diesel 150 - 875 Horsepower Portable, Stationary, or Track

Trust your wood fiber resources to the “Perfect In One Pass” TM advantage.

Rotochopper, Inc. | 217 West Street | St. Martin, MN 56376

-66 B k c lly Tra t Do w r e o N sp ran T with

40 n

The Original Lumberman’s Exchange

Visit us online at www.LBXonline.com!