Lumbermens April 2024 Issue

capacity!. Item ID 13421.

‘83 John Deere 4850

Item ID:

Contact:

Ph:

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor -It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702

Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks

grapple, 5,000 original hours. (excellent condition.). Item ID

1999 Bandit 1900 Tracked Disc Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294. Sam x702

2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production

on injection pump. always started good. in good working order. 22in

1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value with low at hours at 3,500. 5.9 CUMMINS continuous grapple. Runs Great!. Item ID 13740. Sam x702

pump and tranny

Sam x702

Firewood Processor - This is

Sam x702

Donna

www.empirehyd.com info@empirehyd.com

‘16 Halverson H140 Skidsteer (DEMO)

J Williams

(888) 401-6367 x701

‘05 Gehl CTL 70

Item ID: JW-986495

Contact: J Williams

‘83 John Deere 4850

Item ID:

Contact:

Ph:

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor -It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

Ph: (888) 401-6367 x701

•

chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID 13916. Austin x703

•

Best Value Portable Log Splitter -Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702

Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks

automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT BANDIT

1995 Barko 775 B Feller Buncher

-Pumps recently redone. 400 hrs on injection pump. always started good. in good working order. 22in kohing head. head works great.

1999 Bandit 1900 Tracked Disc Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production

1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value with low at hours at 3,500. 5.9

CUMMINS

1990

capacity!. Item ID 13421. Sam x702

SUBSCRIPTION: Lumbermens™, a trade newspaper for the logging, sawmilling, pallet manufacturing, and secondary wood manufacturing industry, is free within the United States to qualifying manufacturers and industry suppliers. Please limit your subscription to one free copy per company or mill location.

CHANGE OF ADDRESS: Send address changes to Lumbermens™ Magazine, 1116 W. 7th St., Ste. 297, Columbia, TN 38401. When possible, please include an old address label.

REPRODUCTION AND RESPONSIBILITY: Advertisers are responsible for the contents and claims of their advertising. Lumbermens™ accepts no responsibility for their claims. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording or any information storage retrieval system, without permission of Lumbermens™. Negatives, artwork, and other items submitted for publication in Lumbermens™ are the property of advertiserQs. Lumbermens ™ owns material typeset and/or designed by Lumbermens ™ and reserves the right to its use outside of Lumbermens™. Lumbermens™ will exercise every precaution in writing, designing, and printing material contained within. We shall not be liable for omissions or typographical errors.

JW-909632

Boulware Equipment Provides Turnkey Solutions

Boulware Equipment is 100 percent committed to repurposing and merchandising wood pallet trash. Designed with the probable end use of your particular type of wood scrap in mind, Boulware can develop a customized solution taking into consideration species, size, color, moisture content and local repurposing options. Like a wood pallet, converted wood fiber has logistical limitations. You can only transport wood fiber so far before it loses economic benefit.

13428 Victory Ln. // PO Box 124

Adams Center, NY 13606

Focused on size reduction, Boulware’s systems are designed with new and rebuilt Cresswood quality shredders. These systems have the flexibility to convert pallet wood trash to sizes suitable to meet their local customers’ needs.

Contact: J Williams

Ph: (888) 401-6367 x701

well built processor. Item ID 13820. Sam x702

Providing full turnkey solutions is Boulware’s proven formula to keep happy customers. These solutions automate reclaiming scrap, convert the wood pallet trash to the desired wood fiber product, provide delivery/transport for the lowest cost, and assist clients in finding a buyer (and a back-up buyer) for their converted wood scrap. Boulware’s approach allows customers to make one call to get the answer for their wood trash challenges.

‘83 John Deere 4850

‘05 Gehl CTL 70

Item ID: JW-986495

Contact: J Williams

Ph: (888) 401-6367 x701

motor, Rotobec

grapple, 5,000 original hours. (excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher -Pumps recently redone. 400 hrs on injection pump. always started good. in good working order. 22in kohing head. head works great.

Boulware helps customers improve their monthly operational profit. Boulware’s solutions also are sustainable and reduce the carbon footprint for their clients. This makes Boulware installations more valuable to their customers as companies look for sustainable suppliers who are committed to reducing landfill waste and carbon footprint reduction.

Item ID: 14073

Contact: Austin

Ph: (888) 401-6367 x703

chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID 13916. Austin x703

Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.

Item ID 13185. Sam x702

Give Boulware a call and see how its staff can develop a customized solution that seamlessly integrates with your production layout while boasting the profitability of your scrap material.

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

2010 Shop Built Wood Processor -It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

Best Value Portable Log Splitter -Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702

Sam x702

For more information, visit Boulware's website at www.boulwarellc.com.

LOGGING EQUIPMENT BANDIT

1999 Bandit 1900 Tracked Disc Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.

1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom

Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks

2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production

capacity!. Item ID 13421. Sam x702

continuous

CUMMINS continuous grapple.

Great!. Item ID 13740. Sam

1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny

INDUSTRY NEWS

Cresswood a Leader in Low-RPM Single Shaft Pallet Grinders

Cresswood Shredding Machinery features a range of industry-leading grinders to provide the perfect solution for your specific pallet recycling needs. From huge volumes of whole pallets to right-sized solutions for smaller volumes of

pieces off a recycling line, it has an engineered-toorder model that fits your company’s needs.

• XR500 Series: Introduced in 2020 as a small footprint solution specifically engineered for pallet manufacturers and recyclers needing to

13428 Victory Ln. // PO Box 124 Adams Center,

NY 13606

‘83 John Deere 4850

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

2010 Shop Built Wood Processor -It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

‘16 Halverson H140 Skidsteer (DEMO)

grind boards, blocks, and miscellaneous scrap from recycling lines. 3,000-5,000 lbs./hr. output capability*

Item ID: JW-909632

Contact: J Williams

Ph: (888) 401-6367 x701

• XR600 Series: Still the most popular choice for pallet companies in the U.S. Can easily handle both dump-andgo grinding of whole

‘13 KMC 2500 Track

Item ID: 14078

Contact: Austin

Ph: (888) 401-6367 x703

off onto a conveyor. This is a very well built processor. Item ID 13820. Sam x702

‘05 Gehl CTL 70

Item ID: JW-986495

Contact: J Williams

Ph: (888) 401-6367 x701

Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

‘93 Barko 180B

Item ID: 14077

pallets as well as boards, stringers, and blocks. 4,000-7,000 lbs./hr. output capability*

Contact: Austin

Ph: (888) 401-6367 x703

• XR700 Series: This beast features a 70-inch long rotor with 20-inch diameter that provides high output characteristics and increased capability to handle extreme loads for decades. 6,500-10,000 lbs./hr. output capability*

‘95 John Deere C6

Tree Farmer

Item ID: 13920

Contact: Austin

Ph: (888) 401-6367 x703

• XR-2400 Series: The largest, most rugged and capable pallet grinder that Cresswood has ever manufactured. 8,000-12,000 lbs./hr. output capability.

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous

These industry-leading,

(Continued on page 10)

on injection pump. always started good. in good working order. 22in

1999 Barko 160D - new engine with meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.

a brand new Duetz engine. Lever control, 33” bar, pump and tranny

Cresswood a Leader... (Continued from page 8)

“Precision

dependable grinders allow pallet companies to increase their output volumes to a new level in low-speed, high-torque grinding while providing much lower energy consumption and cost of ownership than high-rpm equipment.

INDUSTRY NEWS

Low-rpm grinding is a quieter technology and produces substantially less dust than other size reduction solutions, so are designed to be nested within production spaces for added labor savings.

Mulch manufacturers, pellet producers, and biofuel businesses can all benefit from the

dependability and high throughput capabilities of these machines.

‘16 Halverson H140 Skidsteer (DEMO)

Item ID: JW-909632

Contact: J Williams

Ph: (888) 401-6367 x701

Cresswood is dedicated to ever-new technology and committed to continuous improvement through expert engineering and precision manufacturing.

For more information, visit Cresswood's website at www.cresswood.com.

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

2010 Shop Built Wood Processor -It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

‘95 John Deere C6

Tree Farmer

Item ID:

‘13 KMC 2500 Track

Contact:

well built processor. Item ID 13820.

Ph: 703

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous

on injection pump. always started good. in good working order. 22in

1999 Barko 160D - new engine with meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks. a brand new Duetz engine. Lever control, 33” bar, pump and tranny

CW Mill Equipment Provides Strong Service & Support

“Precision Under

Over 40 years ago CW Mill Equipment Co. saw the grinding industry’s need for higher quality industrial grinders, and it has been responding to the wants and needs of the industry ever since.

When it came to industrial wood grinding, CW Mill Equipment Co. started from the ground up with a specific goal to take on the toughest applications. Its goal would drive the company to manufacture the most reliable, highest capacity grinders, and the result was the creation of the HogZilla grinder.

From stumps and logs to railroad ties and tires, the HogZilla line of equipment can handle the toughest jobs and provide the highest production rates. In addition to the relentless operation of these machines, customers appreciate the knowledgeable and committed service provided by CW Mill Equipment Co. staff. Customers can always rely on the company for support.

CW Mill Equipment Co. currently manufactures 20 standard HogZilla grinder models, including self-propelled, track driven, self-loading, and electric units. Most grinder configurations include tub grinders and horizontal feed units for wood and other waste recycling. Optional thrown object restraint and tire processing packages are available for most portable and stationary tub grinders.

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

HogZilla grinders are built to meet and exceed a customer’s needs. They are built to be reliable, for production, and heavy.

‘95 John Deere C6

CW Mill Equipment Co. manufactures the highest quality industrial grinders and believes in service after the sale. HogZilla customer support and parts availability has been top rated in the grinder industry.

‘13 KMC 2500 Track Skidder

Item ID: 14078

Contact: Austin

Ph: (888) 401-6367 x703

Tree Farmer

Item ID: 13920

Contact: Austin

Ph: (888) 401-6367 x703

Each product that CW Mill Equipment Co. has developed, manufactured, and offered for 50 years has been in large part customer driven. That approach is backed with experienced staff, advanced manufacturing equipment, and the will to continue to do what CW Mill Equipment Co. has done for over 50 years – innovate and adapt.

capacity!. Item ID 13421. Sam x702 BARKO

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

2010 Shop Built Wood Processor -It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

For more information, visit CW Mill's website at www. cwmill.com.

off onto a conveyor. This is a very well built processor. Item ID 13820.

1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous

on injection pump. always started good. in good working order. 22in

MAY 3-4,

1999 Barko 160D - new engine with meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.

a brand new Duetz engine. Lever control, 33” bar, pump and tranny

“Precision Under Pressure”

NWPCA Joins Alliance for Sustainable Packaging for Foods, Group Focuses on Crafting Effective Packaging Waste Regulations

The European Union is working on finalizing new Packaging and Packaging Waste Regulations (PPWR) that will shape packaging decisions in Europe and could have ripple effects around the globe. With regulators discussing these critical issues, a group of food producers, retail organizations and the National Wooden Pallet & Container Association have joined forces to create the Alliance for Sustainable Packaging for Foods (ASPF).

This new trade group is focused on encouraging the adoption of a holistic and harmonized approach to food packaging regulation in order to achieve environmental sustainability without compromising on food safety and public health, and without increasing the environmental footprint of the food supply chain. The alliance prioritizes engagement with the on-going interinstitutional negotiations in the EU on the revision of applicable packaging and packaging waste rules, and the P2 and other packaging-related regulatory developments in Canada.

13428 Victory Ln.

// PO Box

124 Adams Center, NY 13606

‘83 John Deere 4850

Item ID:

Contact:

Ph: (888) 401-6367

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID

Best Value Portable Log Splitter -Small manufacturer in PA has made the best valued log splitter.

‘16 Halverson H140 Skidsteer (DEMO)

Item ID: JW-909632

Contact: J Williams

Ph: (888) 401-6367 x701

‘93 Barko 180B

Item ID: 14077

Contact: Austin

Ph: (888) 401-6367 x703

"When discussing the future of packaging, food safety and quality, and reducing food loss and waste are non-negotiable. Members of ASPF are clear: we are committed to significantly reducing packaging waste, just not at the expense of food safety," said Max Teplitski, PhD, International Fresh Produce Association chief science officer and chair of the ASPF.

‘13 KMC 2500 Track Skidder

Teplitski added, "We must take into account the footprint of the entire lifecycle of packaging use while maintaining food safety and addressing phytosanitary concerns. The purpose of ASPF is to find opportunities for partnership across global stakeholders to create a holistic and harmonized approach to packaging regulation, which reflects and accounts for the key outcomes central to a sustainable food supply."

Item ID: 14078

Contact: Austin

Ph: (888) 401-6367 x703

‘95 John Deere C6

Tree Farmer

Item ID: 13920

Contact: Austin

Ph: (888) 401-6367 x703

The ASPF represents a broad group of companies and players who are responsible for safely feeding people around the globe. The National Wooden Pallet & Container Association (NWPCA) is the only group

off onto a conveyor. This is a very well built processor. Item ID 13820. Sam x702

Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT BANDIT

capacity!. Item ID 13421. Sam x702 BARKO

1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours. (excellent condition.). Item ID

(Continued on page 16)

1995 Barko 775 B Feller Buncher

-Pumps recently redone. 400 hrs on injection pump. always started good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

13HP Honda motor. Manual start but electronic option is available.

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor -It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

1999 Bandit 1900 Tracked Disc Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production

1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.

1500 Model

1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny

NWPCA Joins Alliance...

“Precision

(Continued from page 14)

member focused solely on using wooden pallets as transport packaging within the food supply chain.

The ASPF founding members, demonstrating the breadth of this global alliance, include: Aneberries, Canadian Produce Marketing Association, FMI - The Food Industry Association, Fruit South Africa, Frutas de Chile, International Fresh Produce Association, National Milk Producers Federation, National Council of Farmers Coops, NWPCA, North American Meat Institute, Organic Trade Association, Reusable Packaging Association, STOP Foodborne Illness, U.S. Dairy Export Council and Western Growers Association.

Jason Ortega, vice president of public affairs for the National Wooden Pallet & Container Association, commented, "The group's initial focus is on the PPWR. Our engagement aims to encourage regulators to adopt a holistic and harmonized approach to food packaging regulation that increases sustainability within the food supply chain without unintended food safety consequences."

13428 Victory Ln. // PO Box 124 Adams

Center, NY 13606

‘16 Halverson H140 Skidsteer (DEMO)

Item ID: JW-909632

Contact: J Williams

Ph: (888) 401-6367 x701

When asked if EU officials can meet sustainability goals while preserving food safety and the efficient movement food products, Ortega responded, "Absolutely. The challenge regulators face is that they're under a deadline, and the initial impact assessments were insufficient. We hope that through the remainder of this process and as we move into implementation, they' ll continue to engage and listen to the industry to find a good balance."

‘93 Barko 180B

Item ID: 14077

Contact: Austin

Ph: (888) 401-6367 x703

‘13 KMC 2500 Track Skidder

Item ID: 14078

A major concern is if regulators develop rules without fully understanding the implications because transport packaging exists for a reason and has a major impact on safely feeding people around the globe. "Sustainable packaging solutions for food, such as reusable packaging, can also lead to superior product protection and temperature management performance, ensuring food quality and safety and reducing waste," said Todd Hoff, executive vice president for the Reusable Packaging Association and vice chair of the Alliance.

Contact: Austin

Ph: (888) 401-6367 x703

‘95 John Deere C6

Tree Farmer

Item ID: 13920

Contact: Austin

Ph: (888) 401-6367 x703

The ASPF is developing working groups to interact with regulators and provide technical information that helps explain the practical implications of various

BARKO

off onto a conveyor. This is a very well built processor. Item ID 13820. capacity!. Item ID 13421. Sam x702

1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous

(Continued on page 17)

FW-16 FIREWOOD WRAPPER

‘05 Gehl CTL 70

‘83 John Deere

4850

Item ID: 14073

Contact: Austin

Ph: (888) 401-6367 x703

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

Item ID: JW-986495

Contact:

Ph: (888) 401-6367 x701

TheGoFastFirewoodWrapper producesbetterfirewood bundlesthantherest.

TheFW-16FirewoodWrapper isbuiltwithtruegearreduction, largebearings,andheavy-duty frames,outlastingthe competition.

Simple,Safe,andReliable.

EDGERS & GANGS

StandardFeatures:

• 1/3HP120VMotor

• ForkPockets

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

2010 Shop Built Wood Processor -It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID 13916. Austin x703

Options: •WheelKits

Best Value Portable Log Splitter -Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702

•AutomaticWrapCycle!

Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks

on injection pump. always started good. in good working order. 22in

1999 Barko 160D - new engine with meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.

2006

Item

Contact:

Ph:

a brand new Duetz engine. Lever control, 33” bar, pump and tranny

NWPCA Joins Alliance... (Continued from page 16)

policy proposals.

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

INDUSTRY NEWS

NY

Fri, 18 August - S un, 20 August

This resource can be found on the ASPF website.

Boonville, New York www.starwebhosting.net/woodsmen/

Looking specifically at the role that pallets play in supply chains, Ortega explained, "Inherently reusable and 100% recyclable, wooden pallets support ASPF's goal of significantly reducing packaging waste. By promoting wooden transport packaging, the alliance can advocate for a circular reuse system, minimizing the environmental impact of packaging disposal."

SOUTHWEST FOREST PRODUCTS EXPO

Fri, 25 August - Sat, 26 August Hot Springs, Arkansas www.arkloggers.com

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO

Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan

The ASPF has developed an extensive White Paper covering the implications of some PPWR developments.

There are a number of very technical considerations that must be evaluated. For example, since the 1970's, fresh foods have been packaged in a "modified atmosphere" (MAP) , which contains a different mixture of oxygen, nitrogen, carbon dioxide and other inert gases to suppress the growth of human pathogens and spoilage organisms. This process require various packaging and processes that extend the shelf life of foods without the use of harsh chemicals.

MID-ATLANTIC LOGGING & BIOMASS

For more information, visit https://www. allianceforsustainablepackaging.com.

Fri, 15 Sept - Sat, 16 Sept Selma, North Carolina www.midatlantic-logging-biomassexpo.com/

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING

P.O.

1916 Columbia, TN 38402-1916 (888) 401-6367

in the foothills of the Allegany Mountain range in Olean, New York. We have been in business since January 1985 producing wood bundling systems called “THE WOOD-PAKER” for the firewood and waste wood industry. We have geared our machinery to meet the needs of various producers. We offer several different types of equipment for packaging your wood from shrink wrapping, stretch wrapping and bagging. However you wish to BUNDLE we have a system for you.

AD

Send

•

•

The

•

•

All these systems provide convenient packaging of waste-wood, slabs, edgings and rewood for the consumer market.

POSTMASTER

YOUR ONE-STOP SHOP FOR BUNDLING SUPPLIES

©2017

Fuelbox Names New Operations Lead and Sales Director

Fuelbox Industrial, LLC recently promoted Sherman Gentry to operations lead, overseeing the entire dayto-day operations in manufacturing and shipping. Also, the company has tapped Tyler Rusomaroff as its new sales director.

Gentry has been with the company for the past two years, assuming the role of manufacturing coordinator. He spearheaded the process to set up Fuelbox's warehouse and welding center, located in Jacksonville, Florida. He has also been responsible for training and supervising new employees for manufacturing roles.

"Fuelbox is one of those rare companies you come across where you feel an automatic connection with their vision, and that's because of the passion of everyone on our team," said Gentry. Ranging from inbound to outbound operations, Gentry has worked in almost every facet of warehousing and has held critical roles in both operations and production. He worked for Target at the Food Distribution Center in Lake City, FL, for six years and was an operations technician for four

13428 Victory Ln. // PO Box 124

Adams Center, NY 13606

‘83 John Deere

4850

Item ID:

Contact:

Ph:

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

‘05 Gehl CTL 70

Item ID: JW-986495

Contact: J Williams

Ph: (888) 401-6367 x701

chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter

-Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702

‘95 John Deere C6

years. In this role, he monitored extensive automation throughout the warehouse cranes, conveyors, and robots, both via software and through physical aspects. He became a certified trainer in each role he held. At Fuelbox, Gentry has proven himself a dedicated leader in operations, and has delivered exceptional levels of fulfillment for the company's clients.

‘13 KMC 2500 Track Skidder

Item ID: 14078

Contact: Austin

Ph: (888) 401-6367 x703

Tree Farmer

Item ID: 13920

Contact: Austin

Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

Gabriel Curry, president of Fuelbox Industrial, said, "When I asked Sherman what he thought

off onto a conveyor. This is a very well built processor. Item ID 13820. Sam x702

Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.

Manufacturing a full line of biomass fired combustion systems backed with fifty years of innovative clean-burn design. Diverse in every way with multi-fuel blending capability. Hurst stokers utilize hundreds of common and abundant solid biomass fuels. Large or small scale, project management is eased with the impressively short installation time required with prefabricated modular components. with

Sam x702

LOGGING EQUIPMENT BANDIT

1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours. (excellent condition.). Item ID 13238. Chris x700

(Continued on page 19)

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor

-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

Rotary Dryers

Sand Dryers

Grain Dryers

Lumber Kilns Cement Kilns

Brick Kilns

Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks

1999 Bandit 1900 Tracked Disc Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production

1995 Barko 775 B Feller Buncher -Pumps recently redone. 400 hrs on injection pump. always started good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value with low at hours at 3,500. 5.9

CUMMINS continuous grapple. Runs Great!. Item ID 13740. Sam x702

BELL

1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny

50 YEARS

INDUSTRY NEWS

NY STATE WOODSMEN'S FIELD D AYS

Fri, 18 August - S un, 20 August Boonville, New York

www.starwebhosting.net/woodsmen/

the most important qualities of operations were, he said reliability, accountability, and excellent communication between departments. I couldn't agree more, and he's done a fantastic job leading our manufacturing team making our Butter Blades. I'm grateful to have his level of dedication on our team!"

The Tree that Started it All!

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

Woods Publishing

ADVERTISING SALES

work in the pallet industry, and the way we set out to serve those professionals in the industry, is inspiring to me. I'm proud to take on this new role!"

SOUTHWEST FOREST PRODUCTS EXPO

Fri, 25 August - Sat, 26 August Hot Springs, Arkansas www.arkloggers.com

72ND ANNUAL GREAT LAKES

LOGGING & HEAVY EQUIPMENT EXPO

Less than a week shy of his first-year anniversary with the company, Tyler Rusomaroff has proven his commitment to Fuelbox's mission and vision, and proven himself a leader within the team. The company has promoted him to the position of sales director. Rusomaroff has years of experience in sales and is dedicated to helping the Fuelbox team better serve its clients.

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MARKETING DIRECTOR

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

DESIGN DIRECTOR

Donna Heninger

MID-ATLANTIC LOGGING & BIOMASS EXPO

Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS

BANDMILLS & HEADSAWS

Rusomaroffs background is rooted in the construction industry. He developed a passion for it at a very young age, helping his father in his granite business, and working the table saws with the company during his high school and college years. He moved to Jacksonville, FL, seven years ago with his wife, and at that time, he worked in real estate sales, as well as rehabbing houses, never losing his love for construction.

Fri, 15 Sept - Sat, 16 Sept Selma, North Carolina www.midatlantic-logging-biomassexpo.com/

"If you ask me, everyone at Fuelbox is a rockstar. I'm grateful I get to work with and learn from everyone on this team," said Rusomaroff. He added, "Our company slogan has really become my mantra. Every time I step in the door, I know we're all working towards the same goal, ' Sparking Productivity Through Innovation.' This company is inspired by the incredible people who

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

KENTUCKY WOOD EXPO

Curry stated, "Tyler brings an amazing energy to our team. He lives out our core values,and he's willing to go above and beyond, not just for our customers, but for our team members. This is a deserved promotion, and I'm excited for the hands-on leadership he brings to the table!"

Fri, 15 Sept - Sat, 16 Sept Lexington, Kentucky

http://www.kfia.org/ KentuckyWoodExpo.aspx

THE PAUL BUNYAN SHOW

Fuelbox Industrial is a company that specializes in manufacturing and supplying band saw blades, circular saw blades, spray paint, and other niche consumables uniquely designed for the pallet industry.

Fri, 6 Oct - Sun, 8 Oct Cambridge, Ohio www.ohioforest.org

Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. To p Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses. Item ID 13876. Austin x703

For more information, visit www.fuelboxindustrial. com or call (904) 685-9323.

S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

Austin Woods Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent tomorris@lumbermens.co

POSTMASTER

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

The Lumberman's Exchange is

monthly by Woods

2010

Fuelbox Names New Operations Lead & Sales Director (Continued from page 18)

well built processor. Item ID 13820. Sam x702

‘05 Gehl CTL 70

Item ID: JW-986495

Contact: J Williams

‘83 John Deere 4850

Item ID: 14073

Contact: Austin

Ph: (888) 401-6367 x701

capacity!. Item ID 13421. Sam x702

motor, Rotobec continuous grapple, 5,000 original hours. (excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher -Pumps recently redone. 400 hrs on injection pump. always started good. in good working order. 22in kohing head. head works great.

Ph: (888) 401-6367 x703

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor -It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter -Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702

Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks

Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT

1999 Bandit 1900 Tracked Disc Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.

Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.

2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production

94 Barko 275 - Excellent value with low at hours at 3,500. 5.9 CUMMINS continuous grapple. Runs Great!. Item ID 13740. Sam

1990

James G. Murphy Co. Northwest Leader In Mill Auctions For Over 35 Years

JGM offers more than 100 years combined experience and is one of the most respected teams in the industry.

- This extensive knowledge of the industry gives us the confidence to manage a wide range of projects.

- We cover the entire wood products industry, from a whole round log to a finished cabinet and from logging equipment to sawmills to Co-Gen plants.

- Since 2000, we have completed more than 800 wood products industry auctions and appraisals.

- Our comprehensive USPAP appraisals provide detailed documentation and valuation of assets.

- A JGM representative is onsite weeks prior to the auction to organize and clean the site as well as prepare all equipment for auction.

- Following auction day, a JGM representative stays on location to manage auction purchase removal.

- The James G. Murphy Company also has a long history of providing appraisals for Wood Products related machinery and equipment.

- Cabinetry & Furniture Plants to Large & Small Log Sawmills, Plywood Mills, Veneer Plants, Reman Plants, Cedar & Redwood Lumber, Treating Plants, Oriented Strand Board Mills, Pellet Mills, Co-Gen Plants and Logging.

SAFETY ALERT

Lone Worker Policies

BACKGROUND

‘16 Halverson H140 Skidsteer (DEMO)

Item ID: JW-909632

Contact: J Williams

Ph: (888) 401-6367 x701

‘93 Barko 180B

Item ID: 14077

Contact: Austin

Ph: (888) 401-6367 x703

It is estimated that there are as many as 53 million lone workers across North America and Europe, approximately 15% of the workforce. Companies within the wood products industry must consider policies and procedures to keep their lone workers safe while executing their work. Examples of potential lone workers in the industry include foresters, truck drivers, mill workers, consultants, and loggers. Many of these workers will be in areas that do not have cell phone coverage, nor will they be in populated areas due to the nature of the work. Working alone can increase the risk of serious injury and response times, especially when the lone worker is performing activities in remote locations.

There are many ways that companies can manage risks for lone workers, whether it be through monitoring with technology or utilizing policies and procedures to create a safe work environment for their employees. To create a comprehensive lone worker program, companies must assess the work environment, understand the risks, and mitigate these circumstances to the best of their ability.

‘13 KMC 2500 Track Skidder

‘95 John Deere C6

Tree

Farmer

Item ID: 13920

Contact: Austin

Ph: (888) 401-6367 x703

WHAT SHOULD BE INCLUDED IN A LONE WORKER POLICY/PROGRAM

13428 Victory Ln. // PO Box 124

Adams Center, NY 13606

Item ID: 14078

Contact: Austin

Ph: (888) 401-6367 x703

Lone worker policies should be very clear on who/when employees are considered to be working alone so that when workers are executing tasks, they understand if the lone worker policy applies to their circumstances. Lone worker policies should also include assessments that identify risks broken down by job role so that lone workers understand the risks associated with their roles and how those risks can be mitigated through actions that the company takes. For example, when lone workers leave the office on employer business, the employer should know where the employee is going, check-in times, and when the employee should return to the office.

‘05 Gehl CTL 70

Item ID: JW-986495

Contact: J Williams

capacity!. Item ID 13421. Sam x702

BARKO

off onto a conveyor. This is a very well built processor. Item ID 13820. Sam x702

‘83 John Deere

Ph: (888) 401-6367 x701

1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours. (excellent condition.). Item ID 13238. Chris x700

Supervisors and employees should have a clear understanding of their responsibilities when employees are working alone, and any lone worker policy or program should include a clear outline of how to report hazards or incidents.

4850

ASSESSING THE RISK FOR LONE WORKERS

Item ID: 14073

Contact: Austin

Ph: (888) 401-6367 x703

chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID 13916. Austin x703

Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.

1995 Barko 775 B Feller Buncher -Pumps recently redone. 400 hrs on injection pump. always started good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

Lone workers are essential to the wood products industry and perform many vital roles. One way to assess the risk is to look at the jobs from different perspectives and analyze the risk of the position by evaluating people risk, environmental risk, task-based risk, and experience-based risk.

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

Best Value Portable Log Splitter -Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702

Sam x702

LOGGING EQUIPMENT BANDIT

• People Risk involves evaluating risks when working in proximity to individuals who pose a potential risk to the worker, such as foresters cruising publicly accessible timber during hunting season, with the risk being a hunter. One way to mitigate this type of risk is to require that employees wear highvisibility clothing/ PPE to assist hunters in identifying workers.

1999 Bandit 1900 Tracked Disc Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.

Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702

• Environmental risk is when the workplace itself poses a risk to personal safety, for example when inclement weather creates dangerous situations for lone workers.

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor -It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks

94 Barko 275 - Excellent value with low at hours at 3,500. 5.9 CUMMINS continuous grapple. Runs Great!. Item ID 13740. Sam x702

• Task-based risk arises from the nature of the task being dangerous, such as using a chainsaw or operating machinery on a dangerous slope.

BELL

2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production

1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny

• Experience-based risk is where the worker does not have the necessary expertise or experience in dealing with unusual situations or the task under the circumstances.

Item ID: 5632

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

HOT BUYS

‘83 John Deere 4850

Item ID: 5519

Item ID: 14073

NOTCHER (CHALLENGER MACHINE BUILT)

Item ID: 2125

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

‘05 Gehl CTL 70

Item ID:

Contact:

Ph: (888) 401-6367 x701

Item ID: 5641

Contact: AUSTIN

Contact: Austin

Ph: (888) 401-6367 x703

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

Item ID: 5549

FIREWOOD PROCESSORS

Contact: AUSTIN

Contact: AUSTIN

Email: Austin@lumbermensco.com

chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID 13916. Austin x703

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Best Value Portable Log Splitter -Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702

Item ID: 3753

Contact: JOE

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

2010 Shop Built Wood Processor -It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709

(C) 801-362-2170

‘13 KMC 2500 Track Skidder

Item ID: 14078

Contact: Austin

Item ID: 3686

Ph: (888) 401-6367 x703

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

off onto a conveyor. This is a very well built processor. Item ID 13820. Sam x702

Item ID: 5612

Contact: AUSTIN

Email: Austin@lumbermensco.com

Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

LOGGING EQUIPMENT BANDIT

1999 Bandit 1900 Tracked Disc Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.

Sam x702

CAT D6K2

Item ID: 1488

2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

‘95 John Deere C6

TIMBERKING B20 SAWMIL

Item ID: 5559

capacity!. Item ID 13421. Sam x702

Contact: AUSTIN

BARKO

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours. (excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

-Pumps recently redone. 400 hrs on injection pump. always started good. in good working order. 22in kohing head. head works great.

Item ID: 3574

Item ID 13185. Sam x702

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value with low at hours at 3,500. 5.9 CUMMINS continuous grapple. Runs Great!. Item ID 13740. Sam x702

Item ID: 5007

BELL

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

2016 WOODMIZER LT-40HD

2018 WOODMIZER LT-50 SUPER

2019 WOODMIZER LT-70 SUPER WIDE

2022 WOODMIZER LT-40 SUPER WIDE HD

2020 WOODMIZER LT-40 WIDE

JD 550G LT

12′ JD 550K LGP

14′ JD 650K LGP

13′ WOODMIZER LT-3000 OPERATION

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

1996 TIMBERJACK 380C

Item ID: 4825

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Item ID: 4710

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Item ID: 2694

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

TIMBERJACK 208

Item ID: 5320

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

INT'L

CABLE SKIDDER

Item ID: 5568

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

CAT 225LC EXCAVATOR

Item ID: 5419

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

86′ TIMBERJACK 230A

Item ID: 3605

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

Item ID: 1966

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

JOHN DEERE 540D

Item ID: 5249

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

FMC 210

Item ID: 5526

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Item ID: 5582

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

FRANKLIN 170 SKIDDER

Item ID: 3517

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

90′ TIMBERJACK 240A

Item ID: 5082

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

98′ JOHN DEERE 640E

Item ID: 2701

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

06′ JOHN DEERE 335

LOG LOADER

Item ID: 5403

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

JOHN DEERE 440C

Item ID: 5242

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

JOHN DEERE 440C’S PACKAGE DEAL

02′ JOHN DEERE 640G2

98′ JOHN DEERE 640G

1983 JOHN DEERE 640C

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

TIMBERJACK 208

Item ID: 5320

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703

(C) 931-797-8029

PRENTICE 210B

Item ID: 5085

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703

(C) 931-797-8029

13428 Victory Ln. // PO Box 124

643J

BELL SUPER T CUTTER

‘16 Halverson H140

Item ID: JW-909632

Contact: J Williams

2022 TIGERCAT 620H

(888) 401-6367

TAJFUN EQUIPMENT

Item ID: 5334

Ph: (888) 401-6367 x701

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Item ID: 5368

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

‘13 KMC 2500 Track

Item ID: 14078

13′ BARKO 595ML MAGNUM

Contact: Austin

‘95 John Deere C6

TIMBERJACK 1010

Item ID: 4907

Adams Center, NY 13606

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

‘83 John Deere 4850

TIMBERJACK 1270

Item ID: 14073

Item ID: 5199

Contact: Austin

Contact: AUSTIN

Ph: (888) 401-6367 x703

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703

(C) 931-797-8029

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

04′ TIGERCAT 620

Item ID: 4952

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

‘05 Gehl CTL 70

Item ID:

Contact:

Ph:

2016 TAJFUN 400 JOY

chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID 13916. Austin x703

Item ID: 5227

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703

(C) 931-797-8029

Best Value Portable Log Splitter -Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702

18′ JOHN DEERE 753J

Item ID: 4974

Ph: (888) 401-6367 x703

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

off onto a conveyor. This is a very well built processor. Item ID 13820. Sam x702

LIEBHERR A312 WITH RYANS HEAD

Item ID: 4979

Contact: AUSTIN

Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.

Email: Austin@lumbermensco.com

Sam x702

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

LOGGING EQUIPMENT BANDIT

1999 Bandit 1900 Tracked Disc Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.

Sam x702

Item ID: 5358

capacity!. Item ID 13421. Sam x702 BARKO

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours.

CAT 538

1995 Barko 775 B Feller Buncher -Pumps recently redone. 400 hrs on injection pump. always started good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

Item ID: 5302

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.

FIREWOOD PROCESSORS

Item ID: 4705

Contact: AUSTIN

Item ID: 4968

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703

2010 Shop Built Wood Processor -It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

(C) 931-797-8029

Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks

CAT D5H TSK

Item ID: 4939

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703

(C) 931-797-8029

2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production

CUMMINS continuous grapple. Runs Great!. Item ID 13740. Sam x702

TIMBCO 445EXL

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

BELL

Item ID: 5293

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny

TIMBERJACK 380C

GRAPPLE SKIDDER

Item ID: 863

Contact: SAM

Email: Sam@lumbermensco.com

Phone: 888-401-6367 EXT 702 (C) 615-596-4148

PRENTICE 384

KNUCKLEBOOM LOADER

Item ID: 978

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

16′ JD 700K

Item ID: 4343

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

06′ JD 700J LGP

Item ID: 3787

Enclosed cab, Winch strong, New sprockets go with it, Undercarriage 55%, Has no mechanical issues, been taken care of, The owner is done with a project he bought it for, Have a reliable trucker available. Buyer pays for trucking, About 80mi south of Louisville, KY

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

2009 JOHN DEERE 548G3

Item ID: 4699

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

LOG LOADER

EXCAVATOR 225 LC

Item ID: 1067

Contact: MOSE

Phone: 208-290-1888

1979 TIMBERJACK 230

CABLE SKIDDER

Item ID: 1072

Contact: KYLE

Phone: 807-631-4081

14′ JOHN DEERE 748H

Item ID: 2707

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

725B TIMBERPRO

Item ID: 1398

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

’92 TIMBERJACK 450C

Item ID: 1369

Contact: ROBERT

Phone: 606-875-4783

JOHN DEERE 550G

CRAWLER DOZER

Item ID: 5388

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

JOHN DEERE 648D

Item ID: 547

Contact: SAM

Email: Sam@lumbermensco.com

Phone: 888-401-6367 EXT 702 (C) 615-596-4148

2016 HYPRO 755HB PROCESSOR

Item ID: 2593

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough wheel sides. This machine 130 presses.

TIMBCO 425D

Item ID: 1429

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

460 TIMBERJACK

carriage turners, carriage controls, cabinet with electronic drives for carriage knees, husk including 48" bottom saw and 36" top saw

Item ID: 1124

Contact: MARCUS

Phone: 660-833-9061

TIGERCAT 822

Item ID: 1130

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

04′ JD 450H

Item ID: 4327

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709

(C) 801-362-2170

TIMBER JACK 450B

GRAPPLE SKIDDER

Item ID: 5452

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

13428 Victory Ln. // PO Box 124

98′ TJ 460

Item ID: 4918

NY 13606

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709

(C) 801-362-2170

‘83 John Deere 4850

648G III SKIDDER

Item ID: 14073

Item ID: 5647

Contact: Austin

Contact: JOE

JOHN DEERE 848L

Item ID: 1184

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

‘05 Gehl CTL 70

Item ID:

Contact:

Ph:

TJ 450B

Item ID: 5098

Contact: JOE

Email: Joe@lumbermensco.com

Ph: (888) 401-6367 x703

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

90′ JD 550G

chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID 13916. Austin x703

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

Best Value Portable Log Splitter -Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702

JD 648L

‘16 Halverson H140

Item ID: JW-909632

(888) 401-6367

12′ JD 648H

Contact: J Williams

02′ CASE 650H

Item ID: 5253

Ph: (888) 401-6367 x701

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709

(C) 801-362-2170

Item ID: 3511

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

‘13 KMC 2500 Track

Item ID: 14078

15′ TIGERCAT 610E

Contact: Austin

Item ID: 4944

Ph: (888) 401-6367 x703

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

off onto a conveyor. This is a very well built processor. Item ID 13820. Sam x702

14′ TIGERCAT 720E

Item ID: 1617

Contact: AUSTIN

Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.

Email: Austin@lumbermensco.com

Sam x702

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

LOGGING EQUIPMENT BANDIT

1999 Bandit 1900 Tracked Disc Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.

Sam x702

’95 JOHN DEERE

548G II SKIDDER

FIREWOOD PROCESSORS

Item ID: 3873

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709

2010 Shop Built Wood Processor -It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

(C) 801-362-2170

Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks

Item ID: 5073

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

Item ID: 5605

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production

‘95 John Deere C6

JOHN DEERE 643K

Item ID: 1531

capacity!. Item ID 13421. Sam x702 BARKO

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

92′ CAT D5H

1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours. on injection pump. always started good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

Item ID: 4678

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.

Runs Great!. Item ID 13740. Sam x702

JOHN DEERE 753J

Item ID: 1582

Contact: AUSTIN

BELL

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny

Adams Center,

03′ JOHN DEERE

98′ CAT 515

Item ID: 4671

Since

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

John

TJ 460D

Item ID: 3286

Contact: JOE

Donna Heninger

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709

(C) 801-362-2170

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

AD

02′ CAT 525B

Item ID: 3214

Contact: JOE

2004 JOHN DEERE 648G3

Item ID: 2628

Contact: AUSTIN

72ND

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703

(C) 931-797-8029

13′ JD 648H

Item ID: 3589

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

MID-ATLANTIC

06′ TIGERCAT 635C

Item ID: 3322

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709

(C) 801-362-2170

2013 JOHN DEERE 848H

Item ID: 2646

Contact: AUSTIN

04′ TIMBERJACK 460D

Item ID: 2724

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

04′ JOHN DEERE 648G3

Item ID: 2791

Contact: AUSTIN

00′ JD 748G III

Item ID: 3210

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

98′ JOHN DEERE 648

Item ID: 2798

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703

(C) 931-797-8029

02′ TJ 660D

Item ID: 4088

Contact: JOE

Email: Joe@lumbermensco.com

Send

Phone: 888-401-6367 EXT 709

(C) 801-362-2170

99′ FRANKLIN 170

Item ID: 4586

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709

(C) 801-362-2170

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703

(C) 931-797-8029

15′ CAT 525D

Item ID: 3172

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709

(C) 801-362-2170

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

CLARK F666 RANGER

Item ID: 3233

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709

(C) 801-362-2170

12′ TIGERCAT 620D

Item ID: 2753

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703

(C) 931-797-8029

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

83′ TJ 380A

Item ID: 2133

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709

(C) 801-362-2170

13′ CAT 545C

Item ID: 2117

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

13428 Victory Ln. // PO Box 124

CAT 515

Adams

Item ID: 1739

NY 13606

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703

(C) 931-797-8029

‘83 John Deere 4850

15′ CAT 559C LOADER

Item ID: 14073

Item ID: 5534

Contact: Austin

04′ JD 435 II

Item ID: 4169

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

‘05 Gehl CTL 70

Item ID:

Contact:

Ph:

17′ JD 437E

Item ID: 4809

‘16 Halverson H140

Item ID: JW-909632

Contact: J Williams

08′ JD 535 SERIES II

(888) 401-6367

10′ JOHN DEERE 648H

Item ID: 4580

Ph: (888) 401-6367 x701

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

Item ID: 1847

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703

(C) 931-797-8029

‘13 KMC 2500 Track

Contact: Austin

CAT 515

Ph: (888) 401-6367 x703

Item ID: 1509

Contact: ERVIN

Phone: (641) 229-1012

off onto a conveyor. This is a very well built processor. Item ID 13820. Sam x702

TIMBERJACK 460

Item ID: 1777

Contact: AUSTIN

‘95 John Deere C6

04′ TIMBERJACK 460D

Item ID: 5445

capacity!. Item ID 13421. Sam x702 BARKO

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

00′ TIGERCAT 245

Ph: (888) 401-6367 x703

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709

(C) 801-362-2170

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

TIMBERJACK

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

240A

GRAPPLE SKIDDER

chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID 13916. Austin x703

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709

(C) 801-362-2170

Best Value Portable Log Splitter -Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702

TIGERCAT 630E

Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.

Email: Austin@lumbermensco.com

Sam x702

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

LOGGING EQUIPMENT BANDIT

1999 Bandit 1900 Tracked Disc Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.

Sam x702

1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours. on injection pump. always started good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

Item ID: 4685

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.

FIREWOOD PROCESSORS

Item ID: 1769

Contact: AUSTIN

Item ID: 1098

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703

2010 Shop Built Wood Processor -It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

(C) 931-797-8029

Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks

13′ TIGERCAT 234

Item ID: 4803

Contact: JOE

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703

(C) 931-797-8029

2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

Runs Great!. Item ID 13740. Sam x702

95′ PRENTICE 210E

Item ID: 3628

Contact: JOE

BELL

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny

Center,

TO VIEW DESCRIPTION, PRICING AND LOCATION -

98′ PRENTICE 280

Item ID: 2166

Since

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709

(C) 801-362-2170

John

VALMET 840.4

Item ID: 1222

Contact: AUSTIN

Donna

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703

JOHN DEERE 1010D

Item ID: 1715

Contact: JAKE

Phone: (440) 537-5124

KOBELCO 250 LOG LOADER

Item ID: 2584

Contact: AUSTIN

Email: Austin@lumbermensco.com

08 ROTTNE H14

Item ID: 2062

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

2004 PONSSE ERGO HARVESTER

Item ID: 2656

Contact: JOE

Email: Joe@lumbermensco.com

2004 PRENTICE 384

Item ID: 2637

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

08′ TIMBCO 415EX

Item ID: 1661

Contact: AUSTIN

Email: Austin@lumbermensco.com

(C) 931-797-8029

Sam

2014

PONSSE SCORPION KING

Item ID: 4914

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

VALMET 840.2 FORWARDER

Item ID: 741

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703

(C) 931-797-8029

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

VALMET 644

Item ID: 1480

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703

(C) 931-797-8029

MORBARK 6036 CHIPPER

Item ID: 1084

Contact: SAM

Email: Sam@lumbermensco.com

Phone: 888-401-6367 EXT 702 (C) 615-596-4148

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

14′ JOHN DEERE 437D

Item ID: 2740

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

JOHN DEERE 1270

Item ID: 1350

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

MORBARK MODEL 20

CHIPHARVESTER

Item ID: 1246

Contact: SAM

carriage turners, carriage drive, hyd pac for carriage, sawyers cab, computer controls, cabinet with electronic drives for carriage knees, husk including 48" bottom saw and 36" top saw

Email: Sam@lumbermensco.com

Item ID: 1035

Contact: RON

Phone: (606) 595-1734

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

12′ JD 643K

Item ID: 4896

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

15′ TIGERCAT 724 G

84′ CAT 518

ROTOSAW CUTTER

Item ID: 3144

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709

(C) 801-362-2170

15′ CAT 553C FELLER BUNCHER

‘93 Barko 180B

‘16 Halverson H140

Item ID: JW-909632

Item ID:

Contact:

Ph: (888) 401-6367

08′ JD 843J

Contact: J Williams

05′ HYDRO-AX 721E

Item ID: 2109

Ph: (888) 401-6367 x701

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

Item ID: 3644

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

‘13 KMC 2500 Track

Item ID: 14078

Contact: Austin

17′ JOHN DEERE 843L

‘95 John Deere C6

07′ TIMBCO 445EXL

Item ID: 3392

Adams Center, NY 13606

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Item ID: 5495

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

Item ID: 2731

Ph: (888) 401-6367 x703

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

off onto a conveyor. This is a very well built processor. Item ID 13820. Sam x702

Firewood Processor - This is

Item ID: 2046

capacity!. Item ID 13421. Sam x702 BARKO

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours. (excellent condition.). Item ID

drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS

& GANGS

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor -It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value with low at hours at 3,500. 5.9 CUMMINS continuous grapple. Runs Great!. Item ID 13740. Sam

1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny

13428 Victory Ln. // PO Box 124

13HP Honda motor. Manual start

Chipper - Cat Under Carriage at

09′

Since

WOODMIZER LT 300

Item ID: 4549

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

EARLY

John

90’S MELLOTT DEBARKER

Item ID: 3329

Contact: JOE

Donna

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

Sam

FENCE POST PROCESSING

Item ID: 1231

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

2017 TIMBERKING 2200

Item ID: 5513

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

2014 BAKER 13′ SAWMILL

Item ID: 4910

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

CORNELL SIZER

Item ID: 1322

Contact: SAM

Email: Sam@lumbermensco.com

Phone: 888-401-6367 EXT 702 (C) 615-596-4148

TIMBERKING B20

SAWMILL

Item ID: 5559

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

2007 TIMBERKING B20

Item ID: 5540

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

hours ready to run. Item ID 13434.

Sam x702

19′ MORGAN MILITARY NOTCHING

carriage turners, carriage

BAND SAW

Item ID: 3567

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

LT40

WOODMIZER

Item ID: 2419

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709

(C) 801-362-2170

2019 TIMBERKING 2000

Item ID: 5508

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

GO

FAST RUN AROUND SYSTEM

Item ID: 1200

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact:

Item

sawyers cab, computer controls, cabinet with electronic drives for carriage knees, husk including 48" bottom saw and 36" top saw

Email:

Phone:

2006 WOODMIZER LT-40

SUPER HD PORTABLE SAWMILL

Item ID: 5425

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

BAKER DOMINATOR FULL OPERATION

Item ID: 5274

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

2019 WOODMIZER LT-70 SUPER WIDE

17′ COOKS AC36 SAWMILL

Item ID: 5019

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

13428 Victory Ln. // PO Box 124

2017 HURDLE SAWMILL

MISCELLANEOUS

Adams Center, NY 13606

Item ID: 5191

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

‘83 John Deere 4850

01′ MACK RD688

Item ID: 14073

Item ID: 4479

Contact: Austin

Contact: JOE

Ph: (888) 401-6367 x703

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

NYLE FIREWOOD DRY KILN

Item ID: 3588

FIREWOOD PROCESSORS

Contact: AUSTIN

2010 Shop Built Wood Processor -It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703

(C) 931-797-8029

Item ID: 5025

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

‘05 Gehl CTL 70

Item ID:

Contact:

Ph:

MACK TRUCK WITH HOOD LOADER

chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID 13916. Austin x703

Item ID: 1089

Contact: SAM

Email: Sam@lumbermensco.com

Phone: 888-401-6367 EXT 702 (C) 615-596-4148

Best Value Portable Log Splitter -Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702

WARRATAH FS20

Item ID: 2100

Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709

(C) 801-362-2170

‘93 Barko 180B

‘16 Halverson H140

Item ID: JW-909632

Contact: J Williams

TAJFUN 480 PLUS JOY

Item ID:

Contact: Austin

Ph: (888) 401-6367 x703

EDMISTON 6HEAD BLOCK SAW

Item ID: 568

Ph: (888) 401-6367 x701

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Item ID: 5342

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

‘13 KMC 2500 Track Skidder

Item ID: 14078

PRECISION 742H DEBARKER

Contact: Austin

Item ID: 5350

Ph: (888) 401-6367 x703

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

off onto a conveyor. This is a very well built processor. Item ID 13820.

Sam x702

WINCH FOR SALE

Item ID: 5413

Contact: AUSTIN

Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.

Email: Austin@lumbermensco.com

Sam x702

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

LOGGING EQUIPMENT BANDIT

1999 Bandit 1900 Tracked Disc Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.

Sam x702

98′ INTERNATIONAL LOG TRUCK

Item ID: 5057

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production

‘95 John Deere C6

16′ COOKS AE4P EDGER

capacity!. Item ID 13421. Sam x702

Item ID: 5013

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

GREAT LAKES LOG TRAILER

SERCO 7000

1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours. on injection pump. always started good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

Item ID: 1946

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.

Runs Great!. Item ID 13740. Sam x702

LOG MAX 7000

Item ID: 1051

BELL

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny

BARKO

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

2010 Shop Built Wood Processor -It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

‘16 Halverson H140 Skidsteer (DEMO)

Item ID: JW-909632

Contact: J Williams

Ph: (888) 401-6367 x701

‘93 Barko 180B

Item ID: 14077

Contact: Austin

Ph: (888) 401-6367 x703

‘13 KMC 2500 Track Skidder

Item ID: 14078

Contact: Austin

Ph: (888) 401-6367 x703

off onto a conveyor. This is a very well built processor. Item ID 13820. Sam x702

Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT BANDIT

1999 Bandit 1900 Tracked Disc Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production

‘95 John Deere C6

Tree

Farmer

Item ID: 13920

Contact:

Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours. (excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

-Pumps recently redone. 400 hrs on injection pump. always started good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value with low at hours at 3,500. 5.9 CUMMINS continuous grapple. Runs Great!. Item ID 13740. Sam x702

1990

20,000lb goose neck trailer. Item ID

Value!

Item ID 12062. Sam x702