Lumbermens March 2021 Magazine

F R E E

E Q U I P M E N T

L I S T I N G S March 2021 TM

pg.18 >>

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

‘95 John Deere C6 Tree Farmer ‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 396

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

The Tree that Started Grapple Assist it All!

PUBLISHER

Woods Publishing

ADVERTISING SALES

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com

for crooked logs Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck

2019 Cord King Line-up

with 44 inch wheels, and all the

Email: info@cordking.ca MID-ATLANTIC LOGGING & BIOMASS Escanaba, Michigan

Fri, 15 Sept - Sat, 16 Sept

Selma, North Carolina Web: www.cordking.ca www.midatlantic-logging-biomass­ MID-ATLANTIC

expo.com/

LOGGING & BIOMASS EXPO

bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine

TOLL FREE 1-888-219-WOOD (9663) KENTUCKY WOOD EXPO

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

in ve1y good condition, Cuts 130

Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

** INFO LINK** •

Wedge and splitter design suitGauge your B & B Mfg. ...............................

18 toM&F ............................. 28 needs B. H. Payne .............................. 16 Meadows Mill, Inc. ................ 33 • 24 to 72 ton splitting Baker ...................................... 5, 7 Menominee Saw ..................... 29 capability Detector's Inc. .............. 30 Bell's Machining .....................

27 Metal • The fastest splitting cycle 31 time on the Brute Force Mfg. .....................

Midwest Sharpening.............. 26 planet.

Buck Equipment (AIM) ........ 36 Morbark ..................................... 9

Facts to consider:

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

feet a minute also has CLT presses.

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage with onboard log turners, carriage drive, hyd pac for carriage, sawyers cab, computer controls, cabinet with electronic drives for carriage knees, husk including 48" bottom saw and 36" top saw

STACKING RAC

The Lumberman's Exchange is N. America’s ............................

40 in the mid 70’s CW Mill-ArmorHog .............. 17 Rotochopper 1. Pioneered first commercial firewood processor published monthly by Woods CW Mill-Hogzilla ................... 15 Row Electric ............................ 20 Publishing, P.O. Box 1916, 2.TN338402.

BarAllsaw Columbia, rightsmodels available M1820, M2030 and M2430 Dyna Products ........................ 35 Sawmill Exchange .................. 11 reserved. All editorial/ advertorial submissions are used at the Empire Hydraulics ...................

8 36, Select40, Sawmill 19 54 & 60 3. 7 Slasher Saw Models Available Model 44,.........................

44HO, 48, discretion of the publisher and may be edited for purposes of clarity Great Lakes Mfg. .................... 34 Smith Sawmill ........................... 4 and space. all efforts productive have 4.Although The Most machine on the planet, proven and guaranteed Hahn Machinery ...................... 3 The Paul Bunyan Show ......... 39 been made to ensure accuracy of content submitted by advertisers Hurst Boiler .............................

14 Thomas Industrial Controls ..... 10 5. Go to our web site for live action video and details www.cordking.ca and writers, the Lumberman's Exchange, its principles and Iron Bull ................................... 21 Union Grove Saw & Knife.. 2, 37 associates, not held liable for 6.areAvailable with single joystick control errors or omissions. Reproduction, Kilgore Saw ............................. 22 Universal Refiner ................... 23 in whole or part, is prohibited with­ www.BakerProducts.net 7. consent.

Exclusive lifetimeLignomat splitter warranty and 1 year bumper to bumper warranty. .................................

24 WoodMizer ................................ l out written 800.S48.6914 I S73.663.7711 ©2017 Woods Publishing

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

❘ L!  (888) 401-MENS 401-MENS

NO. 3

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

‘95 John Deere C6 Tree Farmer ‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID

13238. Chris x700 Field Proven Design for the Independent Hardwood Sawmill ‘05 Gehl CTL 70 a Chomper Model 16 PDA

automatice firewood processor

1995 Barko 775 B Feller Buncher

Item ID: JW-986495 • Corley lnfeed and Edger with Lewis Optimization proven with John Deere power unit with - -Two Pumps recently redone. 400 hrs Contact: J Williams on injection pump. always started low hours. Control panel includes Ph: (888) 401-6367 x701 names with proven results tach, oil pressure, water temp and good. in good working order. 22in ‘83 John Deere kohing head. head works great. amp gauges. Cuts logs up to 16”.

4850 • True Hardwoodchain Optimization Item ID 13185. Sam x702 conveyer, 8 way splitter, on One owner and comes with all Item ID: 14073 20,000lb goose neck trailer.

Item ID manuals and receipts.

Purchased 1999 Barko 160D - new engine with • Small Contact: Austinfootprint that fits inside most existing mills new for $32,500. Item ID 13865. approximately 1500 hours. Hour 13916. Austin x703 Ph: (888) 401-6367 x703 • Value priced with all of the optimization capability of more Best Value Portable Log Splitter meter dont work. The last 2 owners Sam x702 with 1700 hours, in very good - Small manufacturer in PA has LOGGING EQUIPMENT have only used it to load trucks or elaborate high made speed Edger Optimizers BANDIT condition. Easily produces high the best valued log splitter. as a backup as needed. Has a CTR

For more information on our new "M" Series Edger and other Corley and Lewis products, give us a call.

EDGERS & GANGS LEWIS CONTROLS CORLEY SAWMILL OPTIMIZATION MACHINERY

quality chips with patented ‘Cone’

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

delimber, grapple has been rebuilt.

vans and produce 6 - 8 loads per

but electronic option is available.

50% or better. 475 hp Cummins

Item ID 13694. Sam x702

drum design. Can easily load 42’ day. Item ID 13882. Austin x703

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

Chattanooga, Tennessee FIREWOOD PROCESSORS log deck. Has a hydraulic grapple,

2010 Shop Built Wood Processor

chain and kicker that all runs off Phone 423-698-0284 of a 4 cylinder Mercedes power

- It has a 353 Detroit diesel, 40

unit. Has a 4’ chain saw that kicks www.corleymfg.com

inch insert tooth circle saw, 30 foot  Issue 364 396

Lumbermens™  since 1986

❘

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine

Boom cylinders have minor leaks.

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

with 850 HP. 5300 hrs.Cornelius, Mill in good condition. Just finished 10

Oregon BELL

1990 Bell Super T - This Bell has

Phone 503-648-9119 a brand new Duetz engine. Lever

Acre clearing job, ready to work!

control, 33” bar, pump and tranny www.lewiscontrols.com

Remote control. Big production

 List  seLL  exchange  buy  save

❘

 LumbermensCO.com

PleAse PrINt

blades and 1 spare 36" blade),

** CALENDAR**

❑ Please Remove

Zip

loader to drop logs onto carriage,

Precision 58 Chip Pac - Single chute

stop and loader to deal with big

Sam x702

loading system,. Item ID 12764.

heavy duty log turner under log

State

logs onto carriage and track and

frame. Significant new spare parts

Email

to be negotiated separately. Item ID 13198. Sam x702

Manual Four Head Block - Manual www.starwebhosting.net/woodsmen/

From TA ApriL BLE

clutches, disc, bearing, liners and

custom chute. 23” in opening and

Danckaert Band Resaw - Roughly

EquipmEnt REpREsEntativEs

L I S T with S E L44 L inch E X C Hwheels, ANGE B and UY S A Vthe E all LOGGING & HEAVY EQUIPMENT EXPO 401-6367 (888) Thurs, 7 Sept - Sat, 9 Sept bells and whistles, its a production

item id: 14061 contact: Austin x703

EST 1986 AD Sales MID-ATLANTIC LOGGING & BIOMASS 2012 JoHn deere (888) 401-6367 548G3 Fri, 15 Sept - Sat, 16 Sept

Deals PUBLISHER of the Month................................. 18 *Company name and address required to process your change.

Woods Publishing

MID-ATLANTIC

ADVERTISING SALES

Selma, North CarolinaExt. 704 www.midatlantic-logging-biomass­ morris@lumbermensco.com expo.com/

Morris Woods Ad(888) Directory...........................................

38 401-6367 ext. 704 LOGGING & BIOMASS EXPO

morris@lumbermens.co

Reduced PRice item id: 14021 contact: Sam x702

MARKETING DIRECTOR

FAbTeK 344b

P.O. Box 1916 Columbia, TN 38402

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Lumbermens Magazine

V-12 Caterpillar power unit. New

Listings......................... 672ND ANNUAL feed deck 20 foot out feed deck GREAT LAKES fREE EquipmEnt listings!

Call –

Phone

Address

Individual Name

Company Name*

with about 840 hours except for the

EST on this 1986 10 hours machine since it Hot Springs, Arkansas cAll uS todAy foR All youR uSed www.arkloggers.com equiPMent hasneedS! been rebuilt, it has a 24foot in

Safety Alert.............................................

LIST SELL E X C 10 H A N G E Escanaba, BUY SMichigan AVE Morris Woods

If you need to Change your Address or Add Your Name to our mailing list, then please complete this form and mail to:

chipper that has been totally rebuilt

V-12 Cat with 750-800 hp rating.

all steel carriage. Husk. Manual

Fri, 25 August - Sat, 26 August

DEPARTMENTS

Trelan Chipper - This is a remote

OF C O N T E NBANDMILLS T S & HEADSAWS FOREST PRODUCTS EXPO Four Head Block Mounted on

'12 WoodmIzer LT 40 SOUTHWEST

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

DESIGN DIRECTOR Donna Heninger

item id: 14061 contact: J Williams x701

EQUIPMENT REPS

✁

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co



TM

FOR CLASSIFIEDS CHIPPERS Call 888.401.MENS LIST SELL EXCHANGE BUY SAVE EST 1986 See pictures, prices, and NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Location of all equipment at of Boonville, New York www.LumberMB\ISmagazine.com DealS the Month 12846. Sam x702

cuts from sawline, log stop and

City

❑ Please Change

where to order included. Item ID

belted rollcase to clear slabs and

The Tree that Started it All! Free Equipment

❑ Please add

Pulleys on Bearing . Parts Book and

short pop-up transfer to edger,

Austin Woods Issue 364 lumbermenS (888) 401-6367 ext. 703 austin@lumbermens.co

Sam Wall Lexington, Kentucky http://www.kfia.org/ (888) 401-6367 KentuckyWoodExpo.aspx Ext. 702

THE PAUL sam@lumbermensco.com BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct Cambridge, Ohio www.ohioforest.org

Austin Woods Phone: (888) 401-6367 ext. 703 austin@lumbermens.co

Walker Woods

** INFO LINK** ❘

(888) 401-6367

 liSt  Sell  exchange  buY  Save

Chris Woods

that go up and down, with airbags, it(888) includes401-6367 two sets of Mcdonough

pressure guides. Top Casting wheel Ext. 700 ischris@lumbermensco.com supported on both sides. This

is an extremely accurate machine Morris Woods, Ad Sales Phone: (888) 401-6367 in ve1y good condition, Cuts 130 ext. 704

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

For classifieds Call toDay (888) 401-6367

 Since 1986

MAILING ADDRESS

chris Woods Phone: (888) 401-6367 ext. 700 chris@lumbermens.co

machine, with air strain conveyers

❘

Ext. 707

walker@lumbermensco.com

morris@lumbermens.co feet a minute also has CLT presses.

Austin Woods Item ID 13876.

Austin x703 S (888) & W 125401-6367 Band Mill with

Caterpillar generator - Low hours Ext. 703

on the mill, electronic computer Set austin@lumbermensco.com

works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam Wall

Phone: (888) 401-6367 Sam Joex702 Ferrazzano ext.

702

CARRIAGES & DRIVES (888) 401-6367

sam@lumbermens.co

2010 Cardinal HD Carriage

 lumbermenSmagazine.com

Ext. 709

Carriages (Sawmill) - Cardinal joe@lumbermensco.com

Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

SUBSCRIPTION: Lumbermens™, a trade for(AIM) the logging, Bucknewspaper Equipment ........ 36 Send address changes to: sawmilling, pallet manufacturing, and secondary wood manufacturing Lumberman's Exchange Corley Mfg ..............................

32 industry, is free within to qualifying manufacturers P.O. Box 1916the United States and industry suppliers.

Please limit your subscription to one free copy Columbia, TN 38402 CRD Metalworks .................... 25 per company or mill location.

The Lumberman's Exchange is CW changes Mill-ArmorHog .............. 17 CHANGE OF ADDRESS: Send address to Lumbermens™

Morbark ..................................... 9

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

published monthly by Woods

Magazine, 1116 7th St., Ste. 297, Columbia, TN 38401.

When CW Mill-Hogzilla ...................

15 Publishing, P.O. BoxW. 1916, possible, please include an old address label.

Columbia, TN 38402. All rights Dyna Products ........................ 35 reserved. All editorial/ advertorial REPRODUCTION AND RESPONSIBILITY: Advertisers are responsible submissions are used at the Empire Hydraulics ................... for the contents and claims of their advertising.

Lumbermens™ accepts8 discretion of the publisher and may no responsibility for their claims.

No part of this publication may be be edited for purposes of clarity Great Lakes Mfg. .................... 34 reproduced or transmitted in any form or by any means, electronic and space. Although all efforts have or mechanical, including photocopying, recording or any...................... information3 Hahn Machinery been made to ensure accuracy of storage retrievalby system, content submitted advertiserswithout permission of Lumbermens™.

Boiler .............................

14 and writers, the Lumberman's Negatives, artwork, and other itemsHurst submitted for publication in Exchange, its principles and Lumbermens™ are the property of advertiserQs. Lumbermens ™ owns Iron Bull ...................................

21 associates,typeset are not held liable for material and/or designed

by Lumbermens ™ and reserves the errors or omissions. Reproduction, Kilgore Saw .............................

22 right to its use outside of Lumbermens™.

Lumbermens™ will exercise in whole or part, is prohibited with­ every precaution and printing material contained .................................

24 out written consent.in writing, designing, Lignomat within. We shall not be liable for omissions or typographical errors.

drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING The Tree that StartedRAC it All!

Multitek ................................... 12

Piper's Saw Shop.................... 13

Rotochopper............................ 40

Row Electric ............................ 20

Sawmill Exchange .................. 11 Since 1986, Lumbermens™ has published a monthly circular Select Sawmill ......................... reaching sawmills, loggers,19 pallet makers, recyclers and industrial woodworking plants worldwide.

Smith Sawmill ...........................

4 PUBLISHER The Paul Bunyan Show ......... 39 Woods Publishing

Thomas Industrial Controls..... 10 DESIGN DIRECTOR

Union GroveTed Saw & Knife.. 2, 37 Monnin Universal Refiner ................... 23 MAILING ADDRESS

1116 W. 7th St.,................................

Ste. 297 • Columbia, TN 38401 WoodMizer l

©2017 Woods Publishing

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

with onboard log turners, carriage

 SELL YOUR EQUIPMENT TODAY TODAY l§

(888) 401-6367

❘

 24/7 SUPPORT 0 SUPPORT

AD SUBMISSIONS May be sent to— morris@lumbermensco.com POSTMASTER Send address changes to: Lumbermens™ Magazine www.BakerProducts.net 1116 W. 7th St., Ste. 297 • Columbia, TN 38401

800.S48.6914 I S73.663.7711

❘ L!  (888) 401-MENS 401-MENS

NO. 5

“Precision Under Pressure”

TM

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘16 Halverson H140 Skidsteer (DEMO)

‘93 Barko 180B Item ID: 14077

FREE EQUIPMENT LISTINGS, CALL (888) Contact: 401-MENS Austin and track and condition, Cutsframe.

130 feet a minute Item ID 13198.

Sam x702 also has CLT presses.

DANCKAERT BAND RESAW CHIPPERS Item ID 13876.

Austin x703 Roughly 10 hours on this CARRIAGES & DRIVES PRECISION 58 CHIP PAC machine since it has been chuteCARDINAL loading system.

HD rebuilt, it has a 24 foot in feed Single2010 Item ID 12764.

Sam x702 CARRIAGE CARRIAGES deck 20 foot out feed deck with COMPLETE SAWMILLS Carriage line it includes 44 inch wheels, and all the bells Cardinal carriage with onboard and whistles, its a production 2006 WOODMIZER LT300log whistles, turners, carriage drive, hyd machine, with air strain This mill is currently running, and machine, with air strain conveyers pac for carriage, sawyers cab, conveyers that go up and down, includes the sawmill, and cab. that go up and down, with computer cabinet with with airbags, it includes incline controls, conveyers, a transfer airbags, it includes twotwo setssets of An electronic drives for carriage of Mcdonough pressure guides. table and two sets of roller Mcdonough pressure guides. Top knees, This husk 48” Top Casting wheel is supported mill including saws a million Casting wheel is supported on tables. bottom saw and 36” top saw, on both sides.

This is an extremely board feet or more of walnut both sides. This is an extremely short pop-up transfer edger, accurate machine in very good good every year. Max log to diameter condition, Cuts 130 feet a minute 36in, Max Width of cut 25in, 13428 also has CLT Victory presses.Ln. // PO Box 124 The width of the band is 1 1/2 Center, NYx703 13606 Inches. Video of it operating is Item IDAdams 13876.

Austin CARRIAGES & DRIVES available, and can be sent upon request.

2010 CARDINAL HD Item ID 13892. Austin x703 CARRIAGE CARRIAGES DRY KILNS Cardinal Carriage line it includes carriage with onboard log MEC 12 X 38 turners, carriage drive, hyd TRIPLE PASS DRUM DRYER pac for carriage, sawyers cab, Comes with trunnions, drum computer controls, cabinet with drive, fan and cyclone.

CTLAustin 70 x703 electronic drives for carriage ‘05 ItemGehl ID 13925. knees, husk including 48” Item ID: JW-986495 bottom saw and 36” top saw, Contact:MEC J Williams 12 X 42 short pop-up transfer to edger, Ph: (888)PASS 401-6367 x701 TRIPLE DRUM DRYER ‘83 John belted rollcaseDeere to clear slabs 12 x 42 Mec triple pass Drum and cuts from sawline, log stop Dryer, comes with trunnions.

4850 8 way splitter, on and loader to drop logs onto chain Itemconveyer, ID 13924.

Austin x703 Item ID: 14073 carriage, heavy duty log turner DYNAMIC CHIPPERS 20,000lb goose neck trailer.

Item ID Contact: Austin under log stop and loader to 2004Austin JCB 441 WHEEL LOADER 13916. x703 Ph: (888) 401-6367 x703 deal with big logs onto carriage 3,509 hours on this machine, BANDMILLS & HEADSAWS

Item ID: works JW-909632 everything astoit should. have belted rollcase clear Islabs Contact: J available Williamsof it running, many videos and cuts from sawline, log stop Ph: (888) 401-6367 x701 and be sent and can loader toupon droprequest. logs onto Item IDheavy 13888.duty Austin carriage, logx703 turner under log stop and loader to 2008with DYNAMIC CHIPPER deal big logs585 onto carriage This is a and 2008 dynamic cone and track frame. head chipper with Sam 1700x702 hours, Item ID 13198. in very good condition. Easily CHIPPERS produces high quality chips with PRECISION 58 CHIP PAC patented ‘Cone’ drum design.

Single chute loading system.

CanItem easily load 42’ ID 12764.

Samvans x702and produce 6 8 loads per day.

COMPLETE SAWMILLS ‘13 2500 Track ItemKMC ID 13882.

Austin x703 2006 WOODMIZER LT300 FIREWOOD PROCESSORS Skidder This mill is currently running, SHOP BUILT Item 2010 ID: 14078 WOOD PROCESSOR Contact: Austin ItPh: has(888) a 353401-6367 Detroit diesel, 40 inch x703 insert tooth circle saw, 30 foot chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. off onto a conveyor. This is a very Item ID 13916. Austin x703

If you recognize this…

with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per

Best Value Portable Log Splitter

you need one of these.

- Small manufacturer in PA has

made the best valued log splitter.

well built processor. Item ID 13820.

Sam x702 FIREWOOD PROCESSOR

Firewood - This is This is a Processor homemade processor

a 10’ log 16deck. awith Chomper Model PDA Has a

hydraulic grapple, chain and kicker that all runs off of a 4 with John Deere power unit with cylinder Mercedes power unit. low Control Hashours. a 4’ chain sawpanel thatincludes kicks off tach, onto oil a pressure, conveyor.water Thistemp is a and very well gauges. built processor. amp Cuts logs up to 16”.

Item ID 13820. Sam x702 One owner and comes with all automatice firewood processor

manuals and receipts. Purchased

FIREWOOD PROCESSOR

new Item ID 13865.

This for is a$32,500.

Chomper Model 16 PDA Sam x702 automatice firewood processor

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start

1500 Model

Chipper - Cat Under Carriage at

Has Log Lift.get Uses 4-way Diesel. 7500 Hours. One owner.

Don’t just fix it again, the wedge permanent solution!

day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor

adjustable to single two way. Great

Well maintained. Item ID 13294.

Firewood Processor - This is a

2004 Bandit Beast Model 4680 -

Value! PA. Item ID 12062. Sam x702 homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off

www.prolenc.com of a 4 cylinder Mercedes power

- It has a 353 Detroit diesel, 40

250.563.8899 inch insertCall tooth877.563.8899 circle saw, 30 foot or unit.

Has a 4’ chain saw that kicks  Issue 364 396 384

Lumbermens™  since 1986

❘

Sam x702

3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

Ph: (888) 401-6367 x703 with John Deere power unit and includes the sawmill, and with hours. Control panela cab. low An incline conveyers, includes oil pressure, transfertach, table and twowater sets temp andtables. amp gauges.

Cutssaws logs of roller This mill up to 16”. One owner a million board feetand orcomes more with all manuals and receipts. of walnut every year.

Max log Purchased for Max $32,500. diameter new 36in, Width ID 13865.

Sam x702 of Item cut 25in, The width of the bandLOGGING is 1 1/2EQUIPMENT Inches. Video of John Deere C6and it‘95 operating is available, BANDIT can be sent upon request.

2004 BANDIT Tree Farmer Item ID 13892.

Austin x703 BEAST MODEL 4680 Item ID:DRY 13920 KILNS 3412 Caterpillar Contact: AustinDiesel engine MEC 12 X 38 with 850 HP. 5300 hrs.

Mill in Ph: (888) 401-6367 x703 TRIPLE PASS DRUM DRYER good condition.

Just finished 10 Comes with job, trunnions, drum Acre clearing ready to work! drive, fancontrol. and cyclone.

Remote Big production capacity!.

ID 13421.

Sam x702 Item IDItem 13925.

Austin x703 capacity!

BARKOSam x702 Item ID 13421.

12 X 42 1994 BarkoMEC 160B - Electric BARKO TRIPLE PASS DRUM DRYER knuckleboom, 30' boom, 75hp 1994 BARKO 160B 12 x 42 Mec triple pass Drum Electric knuckleboom, 30’ motor, Rotobec continuous Dryer, comes with trunnions. boom, 75hp motor, Rotobec grapple, 5,000 original hours.

Item ID 13924.

Austin continuous grapple, 5,000x703 origi(excellent condition.). Item ID

DYNAMIC CHIPPERS nal hours. (excellent condition).

13238. x700WHEEL 2004 JCB 441 ItemChris ID 13238.

ChrisLOADER x700 3,509Barko hours thisBuncher machine, 1995 775BELL BonFeller works asSUPER it should.

I have -everything Pumps recently 400 1990 BELLredone.

T hrs many videos available of it running, This Bell has a brand newstarted Duetz on injection pump. always and can be sent upon request. engine.

Lever control, 33” bar, good. in good working order. 22in Itemand ID tranny 13888.has Austin pump beenx703 rebuilt kohing head. head works great.

not long ago. Hour meter is inop.

Item ID 13185.

Sam x702 Has heat New paint.

Runs perfect.

1999 Barko 160D new with and air, it just needs toengine be fixed.

Item ID 13896.

Sam x702 approximately 1500 hours.

Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

❘

 LumbermensCO.com

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

** INFO LINK**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses.

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 7

40

used

or a

02

00

t

02

r

y

wer

w

ill

videos available and can be sent 1993 BELL SUPER T Phone upon request.

Good running condition. 33” 315.284.4126 Bar Saw. Tires at 50%. Deutz Fax Item ID 13886. Austin x703 315.849.2045 engine. Hour meter broken.

Website www.empirehyd.com 99’ CASE 850G Item ID 13543. Sam x702 Email LONG TRACK DOZER “Precision Under Pressure” info@empirehyd.com BELL TREE CUTTER One owner machine, only Around 1000 hours on the 3300 original hours, has never machine. New air cooled motor been used in the woods, it has only about 300 hours. Rebuilt a ripper on the back, original dangling head. Several bars pads, and chains, Under carriage and chains. Machine came off is new along with new rollers on the job in February and is field the bottom, and new sprockets. ready.

Item ID 13909. Austin x703 CATERPILLAR Item ID 13943. Austin x703 CASE 1994 CATERPILLAR 320 2006 CASE 440 SKID LOADER Dry machine that is in good With only 871 hours, this condition for the year. The stick machine starts, runs, and and bucket cylinder have been operates like new. I have many repacked. It has a thumb and

PIPER’S Saw Shop

bucket on it, also has a 230 Waratah processing head that can be sold with it. Hours are around 19k, motor has been replaced a couple years back.

Machine is working daily.

Item ID 13936. Austin x703 1994 CATERPILLAR D4 HI

‘16TRACK Halverson H140 WITH GRAPPLE This is an (DEMO) extremely low Skidsteer

hour Item dozer/skidder ID: JW-909632with only 2800 actual hours. Comes Contact: J Williams with new 30” pads and chain.

Ph: (888) 401-6367 x701 Undercarriage is still in excellent shape. Fixed grapple and no winch.

Item ID 13932. Sam x702 1996 CAT 214 MOBILE

‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

5 7 0 6 • 5 4 8 • 800

off onto a conveyor. This is a very

well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is

Promotional Pricing Offer

Simonds Red Streak Hard BackCTL 70 ‘05 Gehl 1-1/4” x .042 x 3/4” or 7/8” Item ID: JW-986495 L im it e d Length 13’2”Contact: J Williams

‘83 John Deere $14.27 4850 $14.71

Ph: (888) 401-6367T x701 im e

each

O n ly

Tell us you saw it here! chain conveyer, 8 way splitter, on

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Chipper - Cat Under Carriage at

22X380, direct drive, EROPS,

‘93 Barko 180B 1998 CATERPILLAR 515

Item ID: 14077 Grapple with winch, no heat or Contact: Austin air.

Open cab skidder with 9800 Ph: (888) hours.

Tires401-6367 are 28L’s,x703 rear 90% and fronts are 30% with new bear paws chains.

Item ID 13801. Sam x702 2005 CATERPILLAR 525B This is a dual arch skidder with winch. Very low hour skidder with 7900 frame hours and only 63 hours on a new engine.

‘95 John Deere C6 Continuous grapple, tires are 30.5’s 70%. This is a really Tree@ Farmer nice skidder for the price.

Item ID: 13920 Item ID 13816.

Contact: Austin Sam x702

Ph: (888) 401-6367 x703 2007 CATERPILLAR D6N LGP DOZER ENCLOSED CAB Overall: Cab Heat & AC, 150HP capacity!. Item ID 13421. Sam x702 Cat C6.6L, 90% Undercarriage, GPS Ready,BARKO Sweeps & Rear 1994 Barko 160B - Electric Screen, 13’6” PAT Blade, 39,500 LBS, Hours: 7,867 Horsepower: knuckleboom, 30' boom, 75hp 150 S/N: ALY03028. motor, Rotobec continuous Item ID 13567. Chris x700 grapple, 5,000 original hours.

(excellent ItemSKIDDER ID 2000 CATcondition.).

515 GRAPPLE

13238.

Chris x700 One Owner Runs great! Is it an

excellent Rubber is 1995 Barko condition.

775 B Feller Buncher around 75% Has new Hydraulic pump and Charge pump. on injection pump. always started Item ID 13616. Sam x702 - Pumps recently redone. 400 hrs

good. in goodCLARK working order. 22in kohing head. RANGER head works665D great.

CLARK

Item 13185. x702 TightIDand drySam machine, rebuilt

motor. hour meter broken, has 1999 Barko 160D - new engineItwith a 353 Detroit,1500 withhours. grapple, and approximately Hour

winch, always fires right up, and runs with no issues. have only it toAustin load trucks or Item IDused 13748. x703 meter dont work. The last 2 owners as a backup as needed. Has a CTR

EARLY 70’S CLARK delimber, grapple has been664 rebuilt.

CABLE have SKIDDER Boom cylinders minor leaks.

Sam x702

some center slack, needs front tires, comes with a spare tire.

94 Barko 27519- Excellent value hold Gearmatic winch doesn’t with hours at 3,500.unit.

5.9 good.low 453atDetroit power Item ID continuous 13629. Sam x702 CUMMINS grapple.

3412 Caterpillar Diesel engine

EXPORT LOG DEBARKING LINE x702

Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

2004 Bandit Beast Model 4680 with 850 HP. 5300 hrs. Mill in

good condition. Just finished 10

Acre clearing job, ready to work!

Remote control. Big production

 Issue 364 1986 396 Lumbermens List exchange itbuy  to save arch with winch.

Low hours on ™  since Cat D5B Dozer❘ - Cat D5B s/n seLL  come hook up to and go your this skidder at only 3700. These

EXCAVATOR with 36’ magnet 3 tons steel shear. low hrs! All hard tires, 4 outriggers ideal for scrap business. It also has 48’ swavel bucket for street ditch clean up.

Item ID 13441. Sam x702

job site and put it to work to up

Item ID 13694. Sam x702

JEM Runs Great!. Item ID 13740. Sam

Reconditioned 35 Nicholson BELL A-5 debarker, cab, infeed hour 1990 Super T - This Bell has glassBell rolls, log dischage belt with aside brand new Duetz engine.

Lever log kickers. Call 208-4510365 for details. $279,000 control, 33” bar, pump and tranny ❘

 LumbermensCO.com

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

** INFO LINK**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses.

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 9

“Precision Under Pressure”

SAFETY ALERT

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

Deck Hand Killed While Assisting Truck Driver Source: Forest Resources Association

‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

‘95 John Deere C6 Tree Farmer

Item ID: 13920 BACKGROUND: Contact: Austin ‘13 KMC 2500 Track On a clear, dry winter day in the southeast, a deck401-6367 hand went x703 to assist a Ph: (888) Skidder truck driver who was spotting loaded trailers for future delivery to market Item ID: 14078 by the highway drivers.

Contact: Austin capacity!. Item ID 13421. Sam x702 Ph: (888) 401-6367 x703 BARKO PERSONAL CHARACTERISTICS: 1994 160Bhigh - Electric The deck hand was wearing a hard hat andBarko a yellow visibility vest at the time of the incident.

He was considered fully trained perform knuckleboom, 30' boom,to 75hp off onto a conveyor. This is a very his duties. well built processor. Item ID 13820. motor, Rotobec continuous

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 396

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

Handles logs up to 32”. Uses

13HP Honda motor. Manual start but electronic option is available.

Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Sam x702

grapple, 5,000 original hours.

One owner and comes with all

Item ID 13185. Sam x702

UNSAFE ACT OR- This CONDITION: Firewood Processor is (excellent condition.). Item ID There wereModel three 16trailers and x700 the truck driver was 13238. Chris a Chomper PDA already spotted, backing a fourth load beside the others. The trailer being spotted, and 1995 Barko 775 B Feller Buncher automatice firewood processor the adjacent trailer, were both plantation type trailers, and the bolsters on with John Deere power unit with recently redone. each are about two to three feet above- Pumps the ground.

There was 400 onlyhrs four on injection pump. always started low hours.

Control panel includes to six inches of space between the bolsters of the two trailers. The deck hand was betweenwater the loads, assistinggood. in releasing the landing gear on tach, oil pressure, temp and in good working order.

22in the kohing head. head works great. amptrailer. gauges. Cuts logs up to 16”. manuals and receipts. Purchased ACCIDENT:

1999 Barko 160D - new engine with

As driver up to get the trailer on the landing newthe fortruck $32,500.

Itembacked ID 13865. approximately 1500 hours.gear, Hourthe deck hand’s head was caught between the second bolsters of two meter dont work. The last 2the owners Sam x702 trailers.

LOGGING EQUIPMENT BANDIT

have only used it to load trucks or

as a backup as needed. Has a CTR

INJURY: 1999 Bandit 1900 Tracked Disc delimber, grapple has been rebuilt.

The driver did not know the deck hand’s had have beenminor crushed and Chipper - Cat Under Carriage at Boom head cylinders leaks. waited for a minute to allow the deck hand to come out from between the 50% or better. 475 hp Cummins Item ID 13694. Sam x702 two trailers. When he did not, the driver got out of his truck and found Diesel.

7500 Hours.

One owner.

94 Barko - Excellent valuedozer the deck hand on his knees with his face on the275 ground.

A nearby Well maintained.

Item ID for 13294. with low at hours 3,500.

5.9 for operator was summoned assistance, who called 911 atand checked aSam pulse. hand was continuous pronouncedgrapple. dead after x702There was no pulse. The deckCUMMINS the EMTs. 2004arrival BanditofBeast Model 4680 Runs Great!. Item ID 13740. Sam 3412 Caterpillar Diesel engine

x702

with 850 HP. 5300 hrs. Mill inFOR CORRECTION:BELL RECOMMENDATIONS •good Employees should work areas condition.

Just never finished 10 in tight 1990 Bellaround Super moving T - This equipment.

Bell has •Acre There should be clear line of sight and verified communication between clearing job, ready to work! a brand new Duetz engine. Lever employees before moving equipment when working in close proximity. production 33” bar, pump and tranny •Remote Spottedcontrol. trailersBig should be placed withcontrol, adequate room between trailers.

 List  seLL  exchange  buy  save

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

UNIVERSAL REFINER NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

C

The Tree that Started it All!

O

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

R

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

P

Hot Springs, Arkansas www.arkloggers.com

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept MID-ATLANTIC

LOGGING & BIOMASS EXPO

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

has been rebuilt, it has a 24foot in

O

N

with 44 inch wheels, and all the

Thurs, 7 Sept - Sat, 9 Sept

MARKETING DIRECTOR

10 hours on this machine since it feed deck 20 foot out feed deck

Woods Publishing Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Danckaert Band Resaw - Roughly

72ND ANNUAL GREAT LAKES O LOGGING R& HEAVY A T I EQUIPMENT EXPO

PUBLISHER

ADVERTISING SALES

BANDMILLS & HEADSAWS

bells and whistles, its a production

machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses.

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours

TheDESIGN H.A.W.G. is unbelievably simple, durable The R-MAG is a portable wood wastecomputer grinder on the mill, electronic Set DIRECTOR THE PAUL BUNYAN SHOW Donna Heninger and fast, yet it will grind almost anything and Fri,that can be used in many areas of recycling. works,1 1/2" or 2" band, 22ft. track 6 Oct - Sun, 8 Oct Catgrind 3406 140KW Genset, 12,400 Cambridge, EQUIPMENT REPS product in just one pass... make a finished They canOhio easily and safely lawn clippings, Sam Wall www.ohioforest.org hours ready to run. Item ID 13434. even chips.

Is ideal for grinding: Asphalt, leaves, land clearing, construction/demolition (888) pulp 401-6367 ext. 702 Sam x702 sam@lumbermens.co Shingles, Construction Waste, Green Waste, waste logging slash, stumps, log yard waste, CARRIAGES & DRIVES Austin Woods Stumps, Difficult/Dirty Material, Tropical railroad ties, storm waste, tropical (palm and 2010 Cardinal HD Carriage (888) 401-6367 ext. 703 austin@lumbermens.co Waste (Palm & Palmetto), etc. palmetto) waste etc.

Carriages (Sawmill) - Cardinal

** INFO LINK**

MAILING ADDRESS

Carriage line it includes carriage

800-277-8068 B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

UNIVERSAL REFINER The Paul Bunyan Show ......... 39 Machinery ...................... 3 Grinders/Shredders TheHahn BEST Industrial Hurst Industrial ..... 10 onBoiler the.............................

Planet 14forThomas over 35Controls years.

P . O . B O X 1Lignomat 5 1 .................................

• M O24 NWoodMizer T E S................................

A N O ,l Wwww.BakerProducts.net A 98563 800.S48.6914 I S73.663.7711

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

❘ L!  (888) 401-MENS 401-MENS

NO. 11

ngle Joystick Control 0 Ton Splitter • 67 HP CAT Diesel Cylinder Engine

o Choose From!

4000 SERIES

BELL’S FIREWOOD PROCESSORS BELL’S FIREWOOD PROCESSORS BELL’S FIREWOOD PROCESSORS IntegrIty • PrecIsIon • QualIty • Value 4000 SERIES

• 67 HP CAT Diesel Phone • 44” Circular Engine Saw 315.284.4126 Many Models & 44” Circular Saw • 20”• Diameter Fax • 20” Diameter Capacity Options to Choose From!

315.849.2045 Diesel 4000 SERIES Capacity • Single Joystick FIREWOOD TUMBLER Website • Single Joystick Control Saw • Sturdy HSS Steel Welded www.empirehyd.com Control • 30 Ton Splitter Email er • 30 Ton Splitter FIREWOOD TUMBLER “Precision Under Pressure” • 4’ Diameter Barrel Cylinder info@empirehyd.com Cylinder • Sturdy HSS Steel Welded • 67 HP CAT Diesel ick 4000 SERIES • CleanEngine Out Chute • 4’ Diameter Barrel • 67 HP CAT Diesel Out ChuteSERIES • 44” Circular Saw • Removes Debris & Bark as large as• Clean 2 ¼”4000 • 67 HP CAT Diesel er Engine • 20” Diameter • Removes Debris & Bark as large as 2 ¼” Engine Capacity •• Works with Lift 44” Circular Saw all of our Double chain•Hydraulic Works with all of our conveyors Double chain Hydraulic Lift conveyors ••Single 44”Joystick Circular Saw • 20” Diameter • Optional Honda Power Pack Available FIREWOOD TUMBLER Control • Optional Honda Power Pack Available Capacity Diameter ••30 20” Ton Splitter • Sturdy HSS Steel Welded • Single Joystick Cylinder Capacity • 4’ Diameter Barrel Control • Single Joystick Item ID: JW-909632 • Clean Out Chute • 30 Ton Splitter Control Contact: J Williams • Removes Debris & Bark as large as 2 ¼” Cylinder

Many Models & Options to Choose From!

Woodmaster ‘93 Barko 180B

4000 SERIES

‘16 Halverson H140 Item ID: 14077 Contact: Austin Skidsteer (DEMO) See why we are your BeSt Source for bandsaw blades!

Many Models Models && Many Options to to Choose Choose From!

Options From!

Ph: (888) 401-6367 x703

We offer the highest quality welds and our people use the

• 30 TonMany SplitterModels & • Works with all of our Double chain Hydraulic Lift conveyors Ph:highest (888) 401-6367 x701 and precision to give you the best level of integrity Cylinder • Optional Honda Power Pack Available

Options to Choose From!

Many Models &

Options to Choose From!

bandsaw blades in the business—we ship all over the US.

FIREWOOD TUMBLER Made In

FIREWOOD Canada • Sturdy HSSTUMBLER Steel Welded Satisfaction always guaranteed!

•• Sturdy HSS Steel 4’ Diameter BarrelWelded Clean Out Chute •• 4’ Diameter Barrel FIREWOOD TUMBLER Many Models &• Clean Removes Debris & Bark as large as 2 ¼” • Sturdy HSS SteelTUMBLER Welded• FIREWOOD Out Chute • Sturdy HSS Steel Welded • Removes Works withDebris all of our Double Made In • 4’ Diameter Barrel Options to Choose From!

• & Bark aschain largeHydraulic as 2 ¼” Lift conveyors • 4’ Diameter Barrel • Works Optional Honda Power Pack Available Chute Canada• Clean Out • with all of our Double chain Hydraulic Lift conveyors Please Call for Details • Clean Out Chute • Removes DebrisDebris & Bark as large as 2 ¼” • Removes & Bark large Made In as 2 ¼” Honda Power Pack Available •as Optional

Many Models & • Works with allwith of all our Double chain Hydraulic Lift conveyors • Works of our Double Hydraulic Lift conveyors Options tochain Choose From!

Canada 1-888-995-1965 • Optional Honda Power Pack Available

Details

thIn Kerf

‘13 KMC 2500 Track Skidder

1-888-995-1965 -1965

• Clean Out Chute MadeDebris In • Removes & Bark as large asItem 2 ¼” ID: 14078 Made In Canada Canada 13428 Victory Ln. // PO Box 124 • Works with all of our Double chain Contact: Hydraulic Lift conveyors or visit us online Austin • Optional Honda Power Pack Available Adams Center, NY 13606 Ph: (888) 401-6367 x703 www.bellsmachining.com Please CallPlease for Details Call for Details

nline Financing Available 1-888-995-1965 ning.com 1-888-995-1965 Please Call fororDetails visit us onlineCall for Details Please or visit us online www.bellsmachining.com ailable 1-888-995-1965 Financing Available

or visit us online www.bellsmachining.com Item ID: JW-986495 FinancingPlease Available Call forContact: Details J Williams

Ph: (888) 401-6367 x701

‘83 John 1-888-995-1965 Deere 4850 or visit us online

chain conveyer, 8 way splitter, on Item ID: 14073 www.bellsmachining.com 20,000lb goose neck trailer. Item ID Contact: Austin Financing Available 13916. Austin x703 Ph: (888) 401-6367 x703

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 396

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

Handles logs up to 32”. Uses

13HP Honda motor. Manual start but electronic option is available.

Has Log Lift. Uses 4-way wedge

BARKO

motor, Rotobec continuous

Firewood Processor - This is

(excellent condition.). Item ID

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and

‘06 Western Star One owner and comes with all Michigan Special

amp gauges. Cuts logs up to 16”. manuals and receipts. Purchased

Item ID: 14011 new for $32,500. Item ID 13865.

Contact: Austin Sam Ph:x702 (888) 401-6367 x703

LOGGING EQUIPMENT BANDIT

x702Bandit 1900 Tracked Disc 1999 2004 Hydro 470 - Carriage This cutter Chipper - CatAx Under at

has around 7000 It’s a clean 50% or better.

475hours. hp Cummins and tight machine. reason Diesel.

7500 Hours. Only One owner.

Value! PA. Item ID 12062. Sam x702

selling is due to an upgrade.

Item Well maintained.

Item ID 13294.

ID 13846.

Sam x702 Sam x702

homemade processor with a 10’

aboutCaterpillar 500 hours,Diesel new saw motor 3412 engine

adjustable to single two way. Great Firewood Processor - This is a

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

capacity!. Item ID 13421. Sam x702

well built processor. Item ID 13820.

Sam x702

Made In Canada

‘05 Gehl CTL 70

with 1700 hours, in very good

Dismanteling Blades

ck Barko 160B ElectricPrice Cheut Our Quality • Our 1994 Service • -Our O knuckleboom, 30' boom, 75hp off onto a conveyor. This is a very

www.bellsmachining.com 1-888-995-1965 or visit us online

1-888-995-1965 Financing Available

Item ID: 13920 Contact: AskAustin About Our Ph: (888) 401-6367 x703

1-888-857-5153

Made In Canada

Financing or visit usAvailable online www.bellsmachining.com Please Call for Details www.bellsmachining.com Financing Available

It Co Ph

Blades ‘95Band Johnsaw Deere C6 Tree Farmer

FIREWOOD • Optional Honda PowerTUMBLER Pack Available HSS online Steel Welded or• Sturdy visit us • 4’ Diameter Barrel www.bellsmachining.com • Clean Out Chute FIREWOOD TUMBLER • RemovesAvailable Debris & Bark as large as 2 ¼” Financing • Works with all • of Sturdy our Double HSSchain SteelHydraulic Welded Lift conveyors Made InAvailable Please Call for Details • Optional Honda Power Pack • 4’ Diameter Canada Barrel Made In Canada

W

❘

grapple, 5,000 original hours.

13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in

‘08 John Deere Item ID 13185. Sam x702 CT332 1999 Barko 160D - new engine with kohing head. head works great.

Item ID: 13855 Contact: Sam meter dont work. The last 2 owners Ph: (888) 401-6367 x702 approximately 1500 hours. Hour

have only used it to load trucks or

as a backup as needed. Has a CTR HydroAxgrapple 611B - New injectors, delimber, has been rebuilt.

injector pump. New cummins Boom cylinders have 5.9 minor leaks. engine.

Rebuilt hydraulic pump Item ID 13694. Sam x702

and new 275 teeth.

Item ID 13768.

94 Barko - Excellent value Sam x702 with low at hours at 3,500. 5.9

2004 Bandit Hydro Beast Ax 670 - Engine 2004 Model 4680has -

1999 Hydroax 511EX - New CUMMINS continuous grapple. cummins engine only 1500 Runs Great!.

Itemwith ID 13740.

Sam

with 850 HP. Mill inowner and disc last 5300 year.hrs.

Previous

BELL at the end gear box to hydraulics

good condition.

Justredone. finishedThis 10 had the hydrastats

Acre ready head to work! has aclearing 22” highjob, capacity and is Remote control.

Big production a very clean machine.

Mounted on

34’s with 50% tread. Item ID 13828.  List  seLL  exchange  buy  save Sam x702

hours. Caterpillar just replaced x702

1990 Bell Super T -hours This Bell of summer.

11000 totalhas on

acutter. brandTires neware Duetz engine.

Lever 28L’s @ 80%, 2 control, 33” one bar, slick. pumpBrand and tranny @ 40% and new

center section. 20” single post ❘  LumbermensCO.com head. Heat and air work. Item ID

‘89

Ite Co Ph

137

199

Fell

hou

larg

lifti

larg

Cum

20

Dec

Ite 132

Co Ph

200

12,0

Wor

Aus

199

Bun

Cum

hou

22”

A/C

Cut

Sam

‘1

KM Lo

On

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

** INFO LINK**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses.

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 13

SHRINK WRAP Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

FIREWOOD/WASTEWOOD

“Precision Under Pressure”

‘16 Halverson H140 Skidsteer (DEMO)

Sell Your WOOD – $300/cord or More!

Double or triple your profits by shrink wrapping wastewood - firewood with WOOD-PAKER! Attractive various size packages can be obtained with our high production, easily operated and affordable machines. Eight machines available.

The ideal equipment for producing square bundles palletizable for ease in storage and transporting.

Inquire for free details.

LUMBERMEN’S

B & B Manufacturing • 3007 West River Road • Olean, NY 14760

716-373-5881

13428 Victory Ln. // POEquipment Box 124 Adams Center, NY 13606 Digest

E-mail: bbmfg@verizon.net • Web: www.thewoodpaker.com

Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

‘95 John Deere C6 Tree Farmer Item ID: 13920

PO Box 1146

Item ID: 14078 Columbia, TN 38402-1146 Contact: Austin 1-800-477-7606 Fax (931) 388-3564 capacity!.

Item ID 13421. Sam x702 Ph: (888) 401-6367 x703 www.lumbermenonline.com

BARKO

Sam x702

PROTECT Them ALL ‘05 Gehl CTL 70 ® With Pro-Tec-To Wrap ‘83 John Deere Firewood Processor - This is a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and

‘94 Lines Caterpillar Hydraulic Lines – Fuel Hoses – Air chain conveyer, 8 way splitter, on One owner and comes with all Item ID: 14073 320 Electric Wire Bundles – Control Cables 20,000lb goose neck trailer.

Item ID manuals and receipts. Purchased Contact: Austin

amp gauges. Cuts logs up to 16”.

Ph: (888) 401-6367 x703

13916. Austin x703

Best Value Portable Log Splitter

Item ID: 13936 new for $32,500. Item ID 13865.

Contact: Austin Sam Ph:x702 (888) 401-6367 x703

® ® PRO-TEC-TO WRAP & PRO-TEC-TO SLEEVE with 1700 hours, in very good - Small manufacturer in PA has LOGGING EQUIPMENT CUThigh YOUR made DOWNTIME AND YOUR COSTS! BANDIT condition. Easily produces the best valued log splitter.

4000 hours. Torque convertor quality chips with patented ‘Cone’ logs up to 32”. UsesRubbing1999 Bandit 1900 Tracked Disc Protection AgainstHandles Pinching, Crushing, & Abrasion drum design. Can easily load motor. Manualtostart – EVEN UV 42’ RAYS! 13HP BothHonda are Impervious Oils vans and produce 6 - 8 loads per

but electronic option is available.

day. ItemProvides ID 13882.Maximum Austin x703 Hasfor Log Lift. Uses 4-way wedge Protection Logging,

Construction & Stationary Applications Like: two way. Great EDGERS & GANGS adjustable to single

transmission. hole Carriage wheels. Tires Chipper - Cat 14 Under at and Solvents. are 30.5’s at 55% at 80%.

50% or better.

475and hp one Cummins Diesel.

7500very Hours. owner.

Center has littleOne slack.

This For The Distributor

Well maintained.

IDup 13294. skidder has been aItem back skidder Nearest You, Call

800-355-1250

Brewco Saws - TwoBuggies Brewco• Saws ItemMasts ID 12062. Sam x702 Sam x702 for the several years. Skidder has • Debarker PantographValue!

Arms •PA. Forklift • Wheel Loaders • Skidder Grapples • Knuckleboom Loaders in excellent condition. Runs great.

Firewood Processor - This is a 2004 4680 12000Bandit hours.Beast ItemorModel IDVisit 13805.

Sam • Fellerbuncher Heads • Harvesting Heads • Stroke www.pro-tec-toproducts.com Item ID 13644. Sam x702 3412 homemade processor with a 10’ x702 Caterpillar Diesel engine Delimbers • Dozer Blades FIREWOOD PROCESSORS log deck. Has a hydraulic grapple, with 850 HP. 5300520 hrs.

Mill hard in to 1981 Timberjack - Very Anywhere Hoses & Wires Are – Pro-Tec-To® Products OEM’s, Facilities & Great!.

2010 Shop Built Wood Processor chain and kicker that all runs off good condition.

Just finished 10 come by!Repair 653 Detroit.

Runs Offers Maximum Protection, Lower Costs, Reduced Distributor Inquires Welcome - It has aDowntime 353 Detroit and diesel, 40 of a 4 cylinder Mercedes power Acre clearing job, ready to work!

Item ID 13741. Sam x702 Less Spills! inch insert tooth circle saw, 30 foot Remote control. Big unit. Has a 4’ chain saw that kicks 2002 Timberjack 608sproduction with hot saw  Issue 364 396

Lumbermens™  since 1986

❘

Ite Co Ph

Contact: Austin ‘13 KMC 2500 Track Ph: (888) 401-6367 x703 Skidder LUMBERMEN’S Equipment Digest

well built processor. Item ID 13820.

4850

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

19 44

off onto a conveyor. This is a very

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

‘93 Barko 180B

- Approx. 6000 hours, Machine is  List  seLL  exchange  buy  save  Issue 364

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in

kohing head. head works 440D great.

‘88 John Deere

Skidder

Item ID 13185. Sam x702

58 Ch

Ite Co Ph

1999 Barko 160D - new engine with Item ID: 13781

Rem

Ph: (888) 401-6367 x702 meter dont work.

The last 2 owners

Spee

approximately 1500 hours. Hour Contact: Sam

Equ

have only used it to load trucks or in very goodasshape andHas has abeen as a backup needed.

CTR

40%

Sam x702 Boom cylinders have minor leaks.

Har

well maintained.

ID 12194. delimber, grappleItem has been rebuilt.

‘98 Timberjack 1270Bx702 - 7,300 hrs.

Item ID 13694. Sam 94 Barko6275 - Excellent value Perkins Cylinder Engine.

All

with low and at hours at 3,500. modules computer are5.9 brand CUMMINS grapple. new. Tires oncontinuous average are around

Runs Great!.http://youtu.be/R_ Item ID 13740. Sam 80% Video: x702 MQZe5QEFw. Item ID 13572. Chris

BELL x700 1990 Bell Super T - This Bell has VALMET

a1998 brand new 603 Duetz engine. Lever Valmet 3-Wheeled control, bar,hours pumpon and tranny Buncher33” - 6500 total

machine but no hours on 4BT3.9 ❘  LumbermensCO.com

Lumbermens  since 1986

❘

mac

main

of co

avai

Item

2005

Forw

hyd box

2012

pum

cond

hou

 List  seLL  exch

Phone: (888) 237-4195

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MARKETING DIRECTOR John Williams (888) 401-6367 ext. 701 j@lumbermens.co

DESIGN DIRECTOR Donna Heninger

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

MID-ATLANTIC

LOGGING & BIOMASS EXPO

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct Cambridge, Ohio www.ohioforest.org

** INFO LINK**

BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses.

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal

30+

Carriage line it includes carriage Years

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Auto Saw Morbark .....................................

9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Tensioner Schutte Hammermill Grinder Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper ............................

408 Models  Firewood Processors: Contact: Austin

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

NEW

Item ID: 13965

Fax: (515) 598-729

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

B & B Mfg. ............................... 18

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

►

Strong!

with onboard log turners, carriage

‘01 Benson 34’ End Dump cabinet with electronic drives for drive, hyd pac for carriage,

sawyers cab, computer controls,

Item ID: 13818 carriage knees, husk including

From Price To Performance, (888) 401-6367 Ext. 603 We’re A Cord Above The Rest!

Contact: Sam 48" bottom saw and 36" top saw

STACKING RAC

Dyna Products ........................ 35

 Firewood Cleaners  Firewood Conveyors: 12’, 20’ & 30’  Operator’s Cabs Sawmill Exchange ..................

11 Grapples  Free DVD  Firewood & Log

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

CW Mill-Hogzilla ................... 15

Ph:Electric (888) 401-6367 x703 20 Row ............................

Mag 64-knive Source Grinder Item ID: 14007

Portable • DePenDable Contact: • low MAustin aintenance

Ph: (888) 401-6367 x703 888-SPLITTER (888-775-4883)

Universal Refiner ................... 23 2013319-986-5525 Caterpillar Local • 2756 Kentucky Ave, Mt Pleasant, IA www.BakerProducts.net Lignomat ................................. 24 WoodMizer 535C ................................ l swing motor. Has new jet fit 800.S48.6914 I S73.663.7711 Item ID: 13868 system. This machine is loaded...

Contact: Sam 24/7 SUPPORT ❘  (888) 401-MENS NO. 15 - USED FORESTRY EQUIPMENT FOR SALE  SELL YOUR EQUIPMENT TODAY ❘ WWW.TREETRADER.COM L!pro-heat401-MENS SALE ❘ l§ TODAY 0 SUPPORT 100 ~system The World’s has for cold Largest Kilgore Saw ............................. 22

blockbuster-inc.com

Ph: (888) 401-6367 x702

weather start. Has fire suppression

W

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘93 Barko 180B

‘16 Halverson H140 Skidsteer (DEMO)

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

‘05 Tigercat 230B

‘97 Prentice 210E

Item# 13795 Contact: Sam Ph: (888) 401-6367 x702

Item ID: 13911 Contact: Austin Ph: (888) 401-6367 x703

‘95 John Deere C6 Every Reputable4Wide Band Tree Farmer sided planer that has removable

2006 Logosol Planer - This is a 10”

Supplier Offers

Item ID: that 13920 side cutters will take up to

Contact: Austin ‘13 KMC 2500 Track 12” lumber and includes a blower 3 High Quality Swedish Ph:Steel (888) 401-6367 x703 Skidder 3 3” – 8” Band Width system. Item ID 13428. Sam x702

POLE & POST PEELERS Item ID: 14078 3 16 to 20 Gage Contact: Austin PS8 Post - This peeler capacity!.Peeler Item ID 13421.

Samhas x702 ‘99(888) Hydro-Ax 3 401-6367 Double Cut Ph: x703Optionsbeen converted to electricity over

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

‘06 Brewco B1600 Resaw

BARKO 511EX 3 Choice of Swage orhydraulic.

StelliteComes with a operators

Item ID: 13862 Contact: Sam When You 401-6367 Buy Yourx702 Circular Saws From B.H. Payne Ph: (888)

‘05 Woodmizer You’ve Bought the best... We Guarantee It! LT300

Gehl 70 Item ID: CTL 14031 Traditional‘05 Quality Combined Contact: Austin Item ID: JW-986495 ‘98 611 Ex-Hydro Technology ‘10 Shop Built With Todays

Contact: J Williams Ph: (888) 401-6367 x703 Ax(888) 401-6367 x701 Wood Processor Ph: Circular SawsDeere ‘83 John ID: Complete 13948 Saw Catalog ItemSawID: 13916 Make Sure To Ask ForItem Our Free, Bits and Shanks Contact: Austin Contact: 4850 CircularAustin Knives We Manufacture & Sell Inserted Tooth Headsaws, Solid Tooth Carbide Tipped Saws chain conveyer, 8 way splitter, Ph: (888) 401-6367 x703 on Ph: (888) 401-6367 x703 Item ID: 14073 Saws, Inserted Tooth Cutoff Saws & Carbide Saws. We also Carbide Strobe ® Saws 20,000lb goose neck trailer.

Item ID Contact: B.H. Payne &Austin Company Stock & Sell Bits & Shanks, Carbide Tips, Diamond Wheels, Saw Manufacturers 13916. x703 Ph: John (888) 401-6367 x703 Deere 548G2 Knife Grinding Wheels, SawAustin Gumming Wheels & Knives.

Skidder - Very good running ID 13438. Sam x702 Best Value Portable Log Splitter Item ID: 14042 Here’s What You Get Grapple!

With Every B.H. Payne Saw 810 Combi condition.

Big Capacity 2007 TimberPro Contact: with 1700 hours, Austin in very good - Small manufacturer in PA has • Saws from only Quality Nickel Alloy 9400 hours.

Tires at 40%.

Totally Machine -B66TD Forwarder set Steel. up but Ph:manufactured (888) x703the Highest ‘14 condition.

Easily401-6367 produces high made the best valued log splitter.

• Each Saw Milled with State-Of-The-Art Precision CNC Milling Machine. gone through by TP Dealer who comes with rebuilt Log Max 750 quality chips with ‘Cone’ Handles logs up to 32”.Our Uses Rotochopper • We Tension Yourpatented Saw to Your RPM Speed BEFORE Leaving Factory. did the following: Repacked and processing head. Less than 5200 - 3410 hours. $32,000 in recent drum design.

Can easily load 42’ Guaranteed.

13HP Honda motor. Manual start • Your Satisfaction - Completely 13838 resealed hydraulic cylinders – totalItem hours.ID: Runs very well. Has upgrades and repairs.

Fecon vans and produce 6 - 8 loads per but electronic option is available.

Contact: Sam grapple arch, steering;Head.

Replaced blade and plumbed for a clam BH250 Item ID Has day.

Item IDMulching 13882.

Austin x703 Log Lift.

Uses 4-way (888) 401-6367 Ext.wedge 603 B.H. Payne & Company, Inc. Quality Brand Reg. U.S. Pat Off

Call 800 752-0627

hydraulic hoses and lines where bunk. New swing gear box. Quick 13502.

Sam x702 EDGERS & GANGS adjustable to single two way. Great P.O. Box 90608 needed – fill pump, grapple, etc; attach in 15 min. to switch head to 2011 Tigercat 620D - ThisSaws is a Brewco Saws - Two Brewco Value! PA. Item ID 12062. Sam x702 East Point, GA 30364 Repacked hydraulic fill pump; grapple.

Cummins 6.7 QSB low hour skidder with 5500 Firewood Item ID 13408. Sam x702isengine. in excellent condition.

Runsonly great.

Processor - This a 404 761-8711 Replaced exhaust; Replaced center 260HP. Optional TracksGrapple on all hours on a cummins engine and 2014 Tigercat 630D Item ID 404 13644.

Sam x702 homemade processor with a 10’ Fax 761-5398 pins; aStraightened andsystem. paintedComes bogies adds-$10,000.

Item ID 13501. fire suppression Skidder Arch Grapple.

Just FIREWOOD PROCESSORS log deck.

HasDual a hydraulic grapple, panels; Changed all fluids and Sam x702 mounted on 35.5 tires at 50% back 1990 hours.

3 year/5000 hour PT “Since 1890”Wood Processor 2010 Shop Built chain and kicker that all runs off filters; Re-insulated cab; Checked 2010 TimberPro 725B w/Rolly II and 40%Detroit front and good40chains on of awarranty. tires with dualing - It has a 353 diesel, 4 cylinder35.5 Mercedes power and fixed wiring as needed. Item Processor - Super Clean Machine. all 4 tires.

Has the saw, bigger rings at 60%.

Wide blade. inch insert tooth circle 30630 footaxles unit.

Has a www.paynesaws.com 4’ chain saw that Winch. kicks E-mail: info@paynesaws.com Web Site: and no winch. Center pins are tight Item ID 13526. Sam x702  Issue 364 Lumbermens  since 1986 ❘  List  seLL   Issue 364 Lumbermens  since 1986 ❘ 234BLoader 396fuel List  seLL and extra tank. Item ID ™ 13929.

2015 Tigercat - Model

Sam x702

234B. Only 300 hours on this

1994 Barko 160B - Electric cab, electric boxes, conveyor knuckleboom, 30' boom, 75hpand

WOLVERINE

Item 13799 This is a very off ontoID: a conveyor.

Contact: Sam BUT ONLY well built processor.

Item THE ID 13820.

Ph: (888) 401-6367 x702

kickersRotobec and willcontinuous peel a 3” post to a motor, 7” post. Comes with a barko grapple, 5,000 original hours.loader

BY MENOMINEE SAW GUARANTEES

Sam x702

mounted on a truck that hasIDalso Firewood Processor - This is (excellent condition.).

Item • Cutting Edge Plasma been Welds converted to electric power.

Runs great.

Has worked double 13238. Chris x700 a Chomper Model 16 PDA Item ID 13926. x702Buncher shifts so it has higherprocessor hours Highest • The Industry’s Band Saw 1995 Barko 775 Sam BCapacity Feller automatice firewood PORTABLE SAWMILL at 13,500, but has been well with John Deere power unit with - Pumps recently redone. 400 hrs

• Quick Delivery from our HUGE Inventory

36” Portable Sawmill - Maximum maintained. New U/C last year. on injection pump. always started low hours. Control panel includes • FastAllSharpening & Exchange Program diameter log36” Maximum length 24” grousers. pumps rebuilt last IteminID: JW-492406 tach, oil pressure, water temp and good. good working order. 22in to Keep YOU Running ofContact: cut-20’6” Powered by a Koehler year. Gull wing engine cover with Williams kohing head.J head works great. amp gauges. Cuts logs up to 16”.

Item ID: JW-113876 Ph: (888) 401-6367 x701 Diesel 9.8HP Blade-1-1/4” by 13’2” hydraulic lift for easy maintenance.

• Competitive Item ID 13185. Sam x702 One owner and comes withPricing all J Williams Contact: long 12 Volt saw-head precision Rolly II in good condition and manuals and 401-6367 receipts. Purchased 1999 Barko 160D - new engine with Ph: (888) x701 And ONLY well.

Menominee Gives You Everything up/down.

Item ID 13897. Austin computer measures Owner new for $32,500. Item ID 13865. approximately 1500 hours. Hour You need in a Wide Band Saw – Plus x703 retiring. Bought new for $540,000!. meter dont work. The last 2 owners Sam x702 36” Portable Sawmill - Maximum Item ID 13362.

SamService x702 Expert from the Industry’s Most LOGGING EQUIPMENT have only used it to load trucks or diameter log-36” Maximum length 2006 TimberPro 830 COMBI Staff.

BANDIT Knowledgeable as a backup as needed. Has a CTR of cut-20’6” Powered by Koehler Harvester/Forwarder - Just 5700 1999 Bandit 1900 Tracked Disc delimber, grapple has been rebuilt.

Got a Wide Band Problem?

Blade 1-1/4” by 13’2” hours. Very good condition. Comes gas 19HP Chipper - Cat Under Carriage at Boom cylinders have minor leaks.

Call Menominee Saw Today You’ll saw-head precision with grapple for loading forwarder long 12 Voltand 50% or better. 475 hp Cummins Item ID 13694. Sam x702 Learn Why More Mills Trust the Pro! and Log Max 7000 processing head up/down 12 Volt Electrical Diesel. 7500 Hours. One owner.

94 Barko 275 - Excellent value Item ID: JW-093430 Forward/Reverse Saw Head for harvesting. 2 sets of tracks for Well maintained. Item ID 13294. with low at hours at 3,500. 5.9 Contact: J Williams Travel. Item ID 13899. Austin x703 bogies. Set up for quick change Sam x702 CUMMINS continuous x701 grapple.

Ph: (888) 401-6367 Dixon Sawmill - VERY UNIQUE from harvester to grapple. One 2004 Bandit Beast Model 4680 Runs Great!. Item ID 13740. Sam AND EFFECTIVE MILL! Dixon man operation. Log Max head has 3412 Caterpillar Diesel engine x702 Item Processor - This is aand Chomper 52 in bottom blade 38 in top top saw ID: andJW-538174 runs well.

Compare to 900 16th 49858 with 850 HP. J5300 hrs.

Mill St., in Menominee, MI BELL Contact: Williams super 14, with a 60hp engine.

In blade.

It has a four blade vertical new machine atTel: $650,000. Item ID Fax:Bell 906-863-1147 Ph: condition.

(888) 401-6367 x70110 good Just906-863-2609 finished 1990 Super T - This Bell has very nice shape.

Only 171 hours, edger diesel powered with a fuel 13439. Sam x702 Acre clearing job,Email: ready toinfo@menomineesaw.com work! a brand new Duetz engine. Lever comes with green chain conveyer. efficient duezt 247hp motor.

Item PLANERS Remote control. Big production control, 33” bar, pump and tranny Waratah 624 Super - New All of the manuals for the engine, exchange head buy(Logrite).  save ❘  Lumbermensmagazine.com Computer for and chopper itself come with  roatation exchange  grapple buy w/ save ❘ the  LumbermensCO.com on the a 2006 Tigercat 630C Grapple 10500 hours. New main pump it, as well as all of the electrical 30’ reach on the boom. Joystick Skidder - Very good running and auxiliary pump. New rebuilt schematics. Item ID 13894. Austin

‘11 Doosan DL200

‘05 Transport Trailers Custom Log Pup

14’ Snow Pusher

‘04 Fabtek 344B

TOLL FREE 1-800-582-0470

WWW.MENOMINEESAW.COM

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

Escanaba, Michigan

Woods Publishing MID-ATLANTIC

ADVERTISING SALES

LOGGING & BIOMASS EXPO

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

Donna Heninger

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

BANDSAW

POSTMASTER

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

is an extremely accurate machine

hours ready to run. Item ID 13434.

All Sizes Available!

Sam x702

CARRIAGES & DRIVES

TOP PERFORMING, economical blades for all primary &

2010 Cardinal HD Carriage

secondary wood processing. Welded to your lengths!

We also offer expert sharpening services, plus...

Carriages (Sawmill) - Cardinal

for less. Ask about FREE Shipping!

May be sent to­ morris@lumbermens.co

is supported on both sides. This

Cat 3406 140KW Genset, 12,400

....and just about any Custom Saws you need

AD SUBMISSIONS

pressure guides. Top Casting wheel

on the mill, electronic computer Set

B & B Mfg. ...............................

18you M&F Gauge ............................. 28 to keep cutting longer...

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

it includes two sets of Mcdonough

works,1 1/2" or 2" band, 22ft. track

Gang • Edger • Scragg • Trim • Split • Strob

MAILING ADDRESS

that go up and down, with airbags,

Caterpillar generator - Low hours

BLADES ** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

bells and whistles, its a production

S & W 125 Band Mill with

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

with 44 inch wheels, and all the

Item ID 13876. Austin x703

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR

feed deck 20 foot out feed deck

feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

10 hours on this machine since it

in ve1y good condition, Cuts 130

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

Danckaert Band Resaw - Roughly

machine, with air strain conveyers

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

BANDMILLS & HEADSAWS has been rebuilt, it has a 24foot in

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

Carriage line it includes carriage with onboard log turners, carriage

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

drive, hyd pac for carriage,

48" bottom saw and 36" top saw

Call Marvin Miller for a quote

STACKING ROW ELECTRICAL EQUIPMENT, RAC INC. 231-924-5953 (fax) 231-924-6166 / 11606 Brickyard Road • Holton, MI 49425 Corley ..............................

32 Multitek ...................................

12 ©2019 Wood-MizerMfg LLC

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is CW Mill-ArmorHog .............. 17 Rotochopper............................ 40 published monthly by Woods CW Mill-Hogzilla ................... 15 Row Electric ............................ 20 Publishing, P.O. Box 1916, Columbia, TN 38402. All rights Dyna Products ........................ 35 Sawmill Exchange .................. 11 reserved. All editorial/ advertorial YOUR SOURCE FOR USED, RECONDITIONED: submissions are used at the Empire Hydraulics ...................

Select Sawmill .........................

• Squirrel Cage Motors 8• DC Motors - Crane and Mill 19 • Transformers, Three-Phase discretion of the publisher and may • Gear Speed Drives •4 Across/Line Magnetic Starters be edited for purposes of clarity Great LakesMotors Mfg. .................... 34• Adjustable Smith Sawmill ........................... and space. Although all efforts have • Wound-Rotor Motors • Generators - AC and DC • Reduced Voltage Starters The Paul Bunyan Sets Show ......... 39 Hahn Machinery ......................

3• Engine-Generator been made to ensure accuracy of • Synchronous Motors • Safety Switches content submitted by advertisers • DC Motors • Transformers, Single Phase • Phase Convertors Hurst Boiler .............................

14 Thomas Industrial Controls .....

10 and writers, the Lumberman's Exchange, its principles and P.O. Box 281221• Toledo, Ohio 43606 Iron Bull ...................................

Union Grove Saw & Knife.. 2, 37 associates, are not held liable for ax to WWW.RoWELECTRiCAL.CoM errors or omissions. Reproduction, Kilgore Saw .............................

22 Universal Refiner ................... 23 in whole or part, is prohibited with­ 419-248-4479 rowelec@glasscity.net sales@rowelectrical.com www.BakerProducts.net Lignomat ................................. 24 WoodMizer ................................ l out written consent.

800.S48.6914 I S73.663.7711 WE ANSWER THE PHONE 24 HOURS • WE BUY USED ELECTRICAL ©2017 Woods Publishing

F

800-248-4479

:

419-244-8887

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

❘ L!  (888) 401-MENS 401-MENS

NO. 17

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

“Precision Under Pressure”

‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

‘95 John Deere C6 Tree Farmer 1995 Bell ultra T

John Deere 648H

Item ID: 100003

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

OR 931-797-3915 13428 Victory Ln. //

Item ID: 100006

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

OR 931-797-3915 124

Morgan Band Sawmill ‘13 KMC 2500 Track Item ID: 100005 Skidder Contact: WALKER Email: Walker@lumbermensco.com Item 888-401-6367 ID: 14078 EXT 707 Phone:

OR 931-797-3915

PO Box Adams Center, NY 13606

Contact: Austin Ph: (888) 401-6367 x703

off onto a conveyor. This is a very

H O T

B U Y S

well built processor. Item ID 13820.

Sam x702

John Deere 540B Item ID: 99986

Firewood Processor -931.1 This is Komatsu Item ID: 16 99949 a Chomper Model PDA

Tigercat 620E Item ID: 99984

‘05 Gehl CTL 70

Contact: WALKER Email: ItemWalker@lumbermensco.com ID: JW-986495 Phone: 888-401-6367 EXT 707 Contact: OR 931-797-3915 J Williams

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

OR 931-797-3915

Ph: (888) 401-6367 x701

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703

2016 Barko Tree Chipper

with 1700Item hours,ID: in 16688 very good

condition. produces high Contact: Easily AUSTIN Email: Austin@lumbermensco.com quality chips with patented ‘Cone’ Phone: 888-401-6367 EXT 703

931-797-8029 drum design.

Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD TimbcoPROCESSORS 425EXL

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

'07 Morbark Best Value Portable Log3800 Splitter Horizontal Grinder

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

but electronic option is available.

50% or better. 475 hp Cummins

made the best valued log splitter.

Contact: AUSTIN Handles logs up to 32”. Uses Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 13HP Honda motor. Manual start

931-797-8029

BANDIT Contact: AUSTIN Email: Austin@lumbermensco.com 1999 Bandit 1900 Tracked Disc Phone: 888-401-6367 EXT 703

Chipper -931-797-8029 Cat Under Carriage at

Has Log Lift. Uses 4-way wedge

Diesel. 7500 Hours. One owner.

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 inch insert tooth circle saw,

OR 931-797-3915

Email: Walker@lumbermensco.com Phone: 888-401-6367 707 unit.

Has a 4’ chainEXT saw that

OR 931-797-3915

 Issue 364 396

amp gauges. Cuts logs up to 16”.

Sam '09x702 Mack Truck & Trailer Item ID: 74618 LOGGING EQUIPMENT

99998 2010 ShopItem BuiltID: Wood Processor 30 foot

tach, oil pressure, water temp and

- Small manufacturer in PA has Item ID: 84439

log deck. Has 23 a hydraulic grapple, Morbark disc chipper Item ID: 99944 chain and kicker that all runs off

-Contact: It has a WALKER 353 Detroit diesel, 40

automatice firewood processor Contact: AUSTIN Email: Austin@lumbermensco.com with John Deere power unit Phone: 888-401-6367 EXT with 703

931-797-8029 low hours. Control panel includes

Contact: WALKER of a 4 cylinder Mercedes power

Lumbermens™  since 1986

❘

kicks

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine

with 850 HP. 5300 hrs. 440C Mill in John Deere Item ID: 99999 good condition. Just finished 10

Contact: WALKER Acre clearing job, ready to work!

Email: Walker@lumbermensco.com

Phone: 888-401-6367 707 Remote control. BigEXT production

OR 931-797-3915

 List  seLL  exchange  buy  save

Item ID: 13920 Husky Brute XL 235 Contact: Austin Item ID: 100004 Ph: (888) 401-6367 x703

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

OR 931-797-3915

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID

Timberjack 450C

13238. Chris x700 Item ID: 99988

1995 Barko 775 B Feller Buncher Contact: WALKER

Walker@lumbermensco.com -Email: Pumps recently redone.

Phone: 888-401-6367 EXT 707400 hrs

OR 931-797-3915

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners

Dymax Skidsteer Tree Cutter

have onlyItem used ID: it to96694 load trucks or

as a backupAUSTIN as needed. Has a CTR Contact: Email: Austin@lumbermensco.com delimber, grapple has been Phone: 888-401-6367 EXTrebuilt.

703

931-797-8029 Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

2012 Cat BELLD6K XL

Item ID: 14169 1990 Bell Super T - This Bell has AUSTIN aContact: brandAustin@lumbermensco.com new Duetz engine. Lever Email: Phone: 888-401-6367 EXTtranny 703 control, 33” bar, pump and

931-797-8029 ❘

 LumbermensCO.com

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August

06’ Franklin Q80 Item ID: 14214

Contact: AUSTIN The Tree Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 that Started

OR 931-797-8029

it All!

Boonville, New York www.starwebhosting.net/woodsmen/

Item ID: 54867 EXPO PRODUCTS Item ID: 99992 SOUTHWEST FOREST Fri, 25 August Sat, 26 August Contact: AUSTIN

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

OR 931-797-3915

Woods Publishing Timberjack 360C

Item ID: 89706 ADVERTISING SALES

Morris Woods Contact: AUSTIN Email:(888) Austin@lumbermensco.com 401-6367 ext. 704 Phone: 888-401-6367 EXT 703 morris@lumbermens.co

931-797-8029

Email: Austin@lumbermensco.com Hot Springs, Arkansas Phone: 888-401-6367 EXT 703 www.arkloggers.com

931-797-8029

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept Selma, North Carolina

12’ John Deere 848H John Deere 210G www.midatlantic-logging-biomass­

LOGGING & BIOMASS EXPO

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

OR 931-797-3915

Donna Heninger

EQUIPMENT REPS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

Send changes 2010address Tigercat 250Bto: Lumberman's Exchange Item ID: 99965 P.O. Box 1916 Contact: AUSTIN TN 38402 Columbia,

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 The Lumberman's 931-797-8029 Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers 97’ JohntheDeere 548G2 and writers, Lumberman's Exchange,Item its principles and ID: 99972 associates, are not held liable for Contact: errors or AUSTIN omissions. Reproduction, Email: Austin@lumbermensco.com in whole or part, is prohibited Phone: 888-401-6367 EXT 703with­ out written 931-797-8029 consent.

2012 Eco Log 590D Item ID: 99996

Cambridge, Ohio www.ohioforest.org

2012 Tigercat 250C Item ID: 99966

** INFO LINK**

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

931-797-8029

John Deere 648L BANDMILLS & HEADSAWS

Item ID: 99993 Danckaert Band Resaw - Roughly Contact: WALKER

10 hours on this machine since it Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

has beenOR rebuilt, it has a 24foot in

931-797-3915 feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel

Timberpro 745C

is supported on both sides. This Item ID: 99938 is an extremely accurate machine Contact: AUSTIN

Email: in ve1yAustin@lumbermensco.com good condition, Cuts 130 Phone: 888-401-6367 EXT 703

a minute 931-797-8029 feet also has CLT presses.

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

John Deere 748G3 Sam x702 Item ID: 99990

CARRIAGES & DRIVES

Contact: WALKER

2010 HD Carriage Email:Cardinal Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

Carriages (Sawmill) - Cardinal

OR 931-797-3915 Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Buck Equipment 2016 Cat (AIM) 563C ........ 36 Item ID: 99970 Corley Mfg .............................. 32

Morbark .....................................

9 Timbco 425B Item ID: 99962 Multitek ................................... 12

Contact: AUSTIN CRDAustin@lumbermensco.com Metalworks .................... 25 Email: Phone: 888-401-6367 EXT 703 CW Mill-ArmorHog 931-797-8029 .............. 17

Piper's Saw Shop.................... 13 Email: Austin@lumbermensco.com

931-797-8029 Rotochopper ............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler .............................

John Deere 540G3 14

Thomas Industrial Controls..... 10

Contact: AUSTIN

Phone: 888-401-6367 EXT 703

John Deere 648G3

Item ID: 99961 Iron Bull ...................................

21

Item ID:&99987 Union Grove Saw Knife.. 2, 37

Contact: AUSTIN Kilgore Saw ............................. 22 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Lignomat 931-797-8029 ................................. 24

Contact: WALKER Universal Refiner ................... 23 Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

WoodMizer ................................ l

OR 931-797-3915

©2017 Woods Publishing

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

05’ John Deere 748G3 Item ID: 99967

STACKING RAC

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

931-797-8029

93’ John Deere 640E Item ID: 99971

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 www.BakerProducts.net 931-797-8029

800.S48.6914 I S73.663.7711

❘ L!  (888) 401-MENS 401-MENS

NO. 19

L O G G I N G

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR

MAILING ADDRESS

expo.com/

Contact: AUSTIN Email: Austin@lumbermensco.com KENTUCKY WOOD EXPO Phone: 888-401-6367 EXT 703 Sept931-797-8029 Fri, 15 - Sat, 16 Sept

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Austin Woods Contact: AUSTIN Email:(888) Austin@lumbermensco.com 401-6367 ext. 703 Phone: 888-401-6367 EXT 703 austin@lumbermens.co

931-797-8029

Item ID: 99963

MID-ATLANTIC Item ID: 99983

MARKETING DIRECTOR

Sam Wall (888) ext. 702 John401-6367 Deere 648H sam@lumbermens.co Item ID: 99974

JD 648G Grapple Skidder

John Deere 648G3

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

John Deere 700H Forestry Dozer

2013 John Deere 753J Item ID: 99902

Item ID: 99930

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

OR 931-797-8029

1998 John Deere 548G Grapple skidder

2004 Timbco 425 EXL Item ID: 99855

L O G G I N G

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

OR 931-797-8029

Item ID: 99921

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

OR 931-797-3915

Komatsu PC270LC

Delimber H140 ‘16 Halverson Item ID: 43950 Skidsteer (DEMO)

Contact: SAM Email: ItemSam@lumbermensco.com ID: JW-909632 Phone: 888-401-6367 EXT 702

Contact: J Williams Ph: (888) 401-6367 x701

Valmet 430FXL with Komatsu 233 barsaw Item ID: 99908

Contact: SAM Email: Sam@lumbermensco.com ‘13 KMC 2500 Track Phone: 888-401-6367 EXT 702

Skidder

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

John Deere 548G2 Grapple Skidder Item ID: 78104

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703

Tigercat 724E Feller Buncher

with 1700Item hours,ID: in 99815 very good

condition.

Contact: SAMEasily produces high Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item IDTigercat 13644. Sam x702 830C

Leveling Cutter FIREWOOD PROCESSORS

Item ID: 94337 2010 Shop Built Wood Processor -Contact: It hasSam@lumbermensco.com a SAM 353 Detroit diesel, 40 Email:

Phone: 888-401-6367 EXT 702 inch insert tooth circle saw, 30 foot

 Issue 364 396

CAT 559C Item ID: 269

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709

801-362-2170

‘05 Gehl CTL 70

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Timbco 445EXL Hotsaw Best Value Portable Log Splitter Feller Buncher

well built Caterpillar processor. Item ID 13820.

Tigercat 604 ‘93 Barko 180B

ID: 7436 Item ID:Item 14077 Contact: Austin Contact: AUSTIN Email: Austin@lumbermensco.com Ph: (888) 401-6367 x703 Phone: 888-401-6367 EXT 703

931-797-8029

‘95 John Deere C6 Timberjack 380 ID: 99926 TreeItem Farmer

Item ID:SAM 13920 Contact: Email: Sam@lumbermensco.com Contact: Austin Phone: 888-401-6367 702 Ph: (888) 401-6367 EXT x703

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

Firewood - This is Contact:Processor SAM Sam@lumbermensco.com aEmail: Chomper Model 16 PDA Phone: 888-401-6367 EXT 702 automatice firewood processor

‘115,000 Tigercat grapple, original620D hours.

Item ID: 13929 (excellent condition.). Item ID Contact: SAM 13238. x700 Email:Chris Sam@lumbermensco.com 1995 Barko 775 B Feller Buncher Phone: 888-401-6367 EXT 702

low hours. Control panel includes

on injection pump. always started

Sam x702 Item ID: 2476

with John Deere power unit with

tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased

new $32,500.

13865.

'96forCAT 515Item LogIDSkidder

- Pumps recently redone. 400 hrs

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

‘14 CAT 535C

Handles logs up to EXT 32”.702 Uses Phone: 888-401-6367

LOGGING Contact: SAM EQUIPMENT BANDIT Email: Sam@lumbermensco.com Phone: 888-401-6367 1999 Bandit 1900 TrackedEXT Disc702

meter dont work. The last 2 owners Item ID: 13840 have only used it to load trucks or Contact: SAM asEmail: a backup as needed. Has a CTR Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 delimber, grapple has been rebuilt.

but electronic option is available.

50% or better. 475 hp Cummins

Item ID 13694. Sam x702

- Small manufacturer in PA has Item ID: 47200

made theSAM best valued log splitter.

Contact: Email: Sam@lumbermensco.com

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

‘89 CAT D4Hwith LGPa 10’ homemade processor

Item ID: 13999 log deck. Has a hydraulic grapple, Contact: AUSTIN chain kicker that all runs off Email:and Austin@lumbermensco.com Phone: 888-401-6367 703 of a 4 cylinder MercedesEXT power

931-797-8029 unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Sam x702 Item ID: 7534

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 -

3412 Caterpillar180E Diesel Loader engine Prentice

& CTR saw with 850 HP. 5300 hrs.

Mill in Item ID: 99822 good condition. Just finished 10

Contact: AUSTIN Acre clearing job, ready to work!

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 OR 931-797-8029

Remote control. Big production

 List  seLL  exchange  buy  save

Boom cylinders have minor leaks.

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

Cat 515 Cable BELL Skidder

Item ID: 99873 1990 Bell Super T - This Bell has

SAM aContact: brand new Duetz engine. Lever Email: Sam@lumbermensco.com

Phone: 888-401-6367 EXT 702 control, 33” bar, pump and tranny

❘

 LumbermensCO.com

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August

TIMBERJACK 230A Item ID: 9450

Contact: AUSTIN The Tree Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 that Started

OR 931-797-8029

it All!

Prentice 2384 Item ID: 27398

Serco Woods Grapple Publishing Item ID: 99912

ADVERTISING SALES

Morris Woods Contact: AUSTIN Email: (888) Austin@lumbermensco.com 401-6367 ext. 704 Phone: 888-401-6367 EXT 703 morris@lumbermens.co

OR 931-797-8029

Timberjack 430 PARTS

SOUTHWEST FOREST PRODUCTS EXPO Item ID: 99931 Fri, 25 August - Sat, 26 August

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

OR 931-797-8029

Contact: SAM Hot Springs, Arkansas Email: Sam@lumbermensco.com www.arkloggers.com Phone: 888-401-6367 EXT 702

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

Boonville, New York www.starwebhosting.net/woodsmen/

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept Selma, North Carolina

2010 John Deere 648H TC Skidder Cat 518 Grapple Skidder www.midatlantic-logging-biomass­ MID-ATLANTIC

Item ID: 57023

Item ID: 74169 expo.com/

LOGGING & BIOMASS EXPO

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Contact: SAM

KENTUCKY WOOD EXPO Email: Sam@lumbermensco.com Phone: EXT 702 Fri, 15 Sept888-401-6367 - Sat, 16 Sept Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

EQUIPMENT REPS

Sam Wall 2011 Delimber (888)Volvo 401-6367 ext. 702 Item ID: 99919 sam@lumbermens.co Contact: AUSTIN Austin Woods Email: Austin@lumbermensco.com 401-6367 Phone:(888) 888-401-6367 EXT ext.

703 703

OR 931-797-8029 austin@lumbermens.co

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

'93address Franklin 170 to: Send changes Item ID: 36406 Lumberman's Exchange P.O. Box 1916 Contact: AUSTIN Columbia, TN 38402 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 The Lumberman's OR 931-797-8029 Exchange is

published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers Risley Rolly 2 and writers, the Lumberman's ID: 1993 Exchange,Item its principles and associates, are not held liable for Contact: SAM errors or omissions. Reproduction, Email: Sam@lumbermensco.com in whole or part, is prohibited with­ Phone: 888-401-6367 EXT 702 out written consent. ©2017 Woods Publishing

PARTS '95 Timberjack 450 Dual Arch Skidder Item ID: 12270

Cambridge, Ohio www.ohioforest.org

John Deere 3754D Item ID: 45747

** INFO LINK**

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

OR 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

OR 931-797-8029

88’ John Deere 540D BANDMILLS & HEADSAWS Item ID: 99915

Danckaert Band Resaw - Roughly Contact: AUSTIN

Email: Austin@lumbermensco.com 10 hours on this machine since it Phone: 888-401-6367 EXT 703

OR 931-797-8029 has been rebuilt, it has a 24foot in

feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough

'18guides.

Diamond Z Trackwheel pressure Top Casting Mounted Horizontal Grinder

is supported on both sides. This Item ID: 373 is an extremely accurate machine Contact: AUSTIN

in ve1yAustin@lumbermensco.com good condition, Cuts 130 Email: Phone: 888-401-6367 EXT 703

feet a minute also has CLT presses.

OR 931-797-8029 Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run.Processor Item ID 13434.

Cat 322CL

Logmax 7000XT Sam x702 Item ID: & 78834 CARRIAGES DRIVES Contact: SAMHD Carriage 2010 Cardinal

Email: Sam@lumbermensco.com

Phone: 888-401-6367 702 Carriages (Sawmill) - EXT Cardinal

Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Item ID: 99904 Corley Mfg .............................. 32

Item ID: 79682 Multitek ................................... 12

Bandit 1850 Track Chipper Buck Equipment (AIM) ........ 36

Prentice 210E Loader Morbark ..................................... 9

Contact: AUSTIN Email: Austin@lumbermensco.com CRD Metalworks .................... 25 Phone: 888-401-6367 EXT 703

OR 931-797-8029

CW Mill-ArmorHog .............. 17

Contact: AUSTIN Email: Austin@lumbermensco.com Piper's Saw Shop.................... 13 Phone: 888-401-6367 EXT 703

OR 931-797-8029 Rotochopper ............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Feller Boiler .............................

14 Buncher Item ID: 78672 Iron Bull ...................................

21

Contact: KilgoreAUSTIN Saw ............................. 22 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 24 Lignomat OR.................................

931-797-8029

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

2210..... 10 Thomas PRENTICE Industrial Controls Item ID: 7060 Union Grove Saw & Knife.. 2, 37 Contact: AUSTIN Email: Austin@lumbermensco.com Universal Refiner ................... 23 Phone: 888-401-6367 EXT 703

OR 931-797-8029 WoodMizer ................................ l

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

Prentice Knuckle 48" bottom saw 384 and 36" top saw Boom & Delimber Item ID: 49732

STACKING RAC

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

‘93 John Deere 548E Item ID: 14083

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 www.BakerProducts.net 931-797-8029 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 21

L O G G I N G

MARKETING DIRECTOR

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

Cat D6T XW Dozer Item ID: 27832

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

'09 John Deere 753J Buncher Item ID: 14106

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

OR 931-797-8029

08’ John Deere 437C $46,500

‘16 Halverson H140 Item ID: 53095 Skidsteer (DEMO) Contact: AUSTIN

Email: Austin@lumbermensco.com Item ID: JW-909632 EXT 703 Phone: 888-401-6367 Contact: 931-797-8029 J Williams

‘93 Barko 2015 Cat180B 545D

Item ID: 45196 Item ID: 14077 Contact:AUSTIN Austin Contact: Email: Austin@lumbermensco.com Ph: (888) 401-6367 x703 Phone: 888-401-6367 EXT 703

931-797-8029

Ph: (888) 401-6367 x701

2012 John Deere 648H

Timberjack 240

2014 Tigercat 234B

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com ‘13 KMC 2500 EXT Track Phone: 888-401-6367 703

931-797-8029

L O G G I N G

Price $45,000

Item ID: 80318

Grapple

Item ID: 35810 Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

OR 931-797-8029

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 John Deere 333Gx703 Skid

Steer

with 1700Item hours,ID: in 31439 very good

CAT 235 BZ Item ID: 1865

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

OR 931-797-8029

‘05 Gehl CTL 70

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916.

Austin Prentice 384 w/x703 Bucksaw & Delimber ID: 14213 Best ValueItem Portable Log Splitter

quality chips with patented ‘Cone’

-Contact: Small manufacturer AUSTIN in PA has Email: Austin@lumbermensco.com made the888-401-6367 best valued logEXT splitter.

Phone: 703

OR up 931-797-8029 Handles logs to 32”. Uses

vans and produce 6 - 8 loads per

but electronic option is available.

condition. Easily produces high Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

drum design. Can easily load 42’ day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. x702 Morbark 20Sam Chipharvester Item ID: 38035 FIREWOOD PROCESSORS

2010 Shop Built Contact: SAM Wood Processor Email: Sam@lumbermensco.com -Phone: It has a 353 Detroit diesel, 888-401-6367 EXT40702 inch insert tooth circle saw, 30 foot  Issue 364 396

Skidder

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with 848L a 10’ 2015 John Deere

Itema ID: 83128 grapple, log deck. Has hydraulic

chain and kicker that all runs off Contact: AUSTIN Email: Austin@lumbermensco.com of a 4 cylinder Mercedes power Phone: 888-401-6367 EXT 703

931-797-8029 unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

‘95Timberjack John Deere C6 240 Cable Skidder TreeItem Farmer ID: 60608

Item ID: 29966

off onto a conveyor. This is a very

well built processor. Item ID 13820.

2009 Valmet 840.4

Sam x702 Item ID: 79249

Firewood Processor - This is Contact: AUSTIN Austin@lumbermensco.com aEmail: Chomper Model 16 PDA Phone: 888-401-6367 EXT 703 automatice firewood processor

931-797-8029 with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500.

Item ID 13865.

John Deere 648H

Grapple Skidder Sam x702 Item ID: 96833 LOGGING EQUIPMENT Contact: SAMBANDIT Email: Sam@lumbermensco.com

Phone: 888-401-6367 EXT 702 1999 Bandit 1900 Tracked Disc

Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins

Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 -

Item ID: 13920

Contact: SAM Contact: Austin Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702x703 Ph: (888) 401-6367

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

MC 166 Rotochopper

grapple, 5,000 hours.

Itemoriginal ID: 8165

(excellent condition.). Item ID Contact: SAM

13238. x700 Email:Chris Sam@lumbermensco.com

Phone: 888-401-6367 EXT 702 1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours.

Hour John Deere 648G3

meter dont work. last 2 owners Item ID:The 99831 have only used it to load trucks or Contact: AUSTIN Email: Austin@lumbermensco.com

as a backup as needed.

Has a CTR Phone: 888-401-6367 EXT 703

OR 931-797-8029

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

2012 Barko 920 3412 Forestry Caterpillar Diesel engine Mulcher

Runs Great!. Item ID 13740. Sam

good condition.

Just finished 10 Contact: AUSTIN Email: Austin@lumbermensco.com Acre clearing job, ready to work!

Phone: 888-401-6367 EXT 703

931-797-8029 Remote control. Big production

1990 Bell Super T - This Bell has Contact: AUSTIN Email: Austin@lumbermensco.com aPhone: brand new Duetz engine.

888-401-6367 EXTLever 703

931-797-8029 control, 33” bar, pump and tranny

Item ID:hrs.

47228 with 850 HP. 5300 Mill in

 List  seLL  exchange  buy  save

x702 Barko

595Ml Tracked

Item BELL ID: 43774

❘

 LumbermensCO.com

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August

John Deere 540B Item ID: 0908

Contact: SAM The Tree Email: Sam@lumbermensco.com that Started Phone: 888-401-6367 EXT 702

it All!

Boonville, New York www.starwebhosting.net/woodsmen/

Cat 939 Crawler Loader FOREST PRODUCTS EXPO John Deere 650H SOUTHWEST LGP

Cat 535C Grapple Woods Publishing Skidder

ADVERTISING SALES Item ID: 50218 Morris Woods

Contact: SAM (888) 401-6367 ext. 704 Email: Sam@lumbermensco.com morris@lumbermens.co Phone: 888-401-6367 EXT 702

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

2007 Cat 517

Item ID: 60554 MID-ATLANTIC

LOGGING & BIOMASS EXPO

Selma,John NorthDeere Carolina 540D www.midatlantic-logging-biomass­ Item ID: 5613 expo.com/

Contact: SAM Contact: AUSTIN Email: Austin@lumbermensco.com Email: Sam@lumbermensco.com WOOD EXPO Phone: 888-401-6367 EXT 703 KENTUCKY Phone: 888-401-6367 EXT 702

931-797-8029 Fri, 15 Sept - Sat, 16 Sept

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

EQUIPMENT REPS 2009 2384 Prentice Sam Wall Knuckleboom Loader (888) 401-6367 ext. 702 Item ID: 83019 sam@lumbermens.co

Contact: SAM Austin Woods Email:(888) Sam@lumbermensco.com 401-6367 ext. 703 Phone: 888-401-6367 EXT 702 austin@lumbermens.co

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

Send address changes to: Michagan Wheel Loader

Lumberman's Exchange Item ID: 99929 P.O. Box 1916 Contact: SAM TN 38402 Columbia,

Email: Sam@lumbermensco.com Phone: 888-401-6367 EXTis702 The Lumberman's Exchange

published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers Timberjack 230 Cable Skidder and writers, the Lumberman's Item ID: 51788 Exchange, its principles and associates,AUSTIN are not held liable for Contact: errors or omissions. Reproduction, Email: Austin@lumbermensco.com in whole888-401-6367 or part, is prohibited with­ Phone: EXT 703 out written 931-797-8029 consent. ©2017 Woods Publishing

Phone: 888-401-6367 EXT 702

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

83’ John Deere 740A Item ID: 95074

Cambridge, Ohio www.ohioforest.org

2017 Tigercat 630E Item ID: 84473

** INFO LINK**

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

931-797-8029

‘03 John Deere 748GIII BANDMILLS & HEADSAWS

Item ID: 13851 Danckaert Band Resaw - Roughly Contact: 10 hours onSAM this machine since it Email: Sam@lumbermensco.com has been rebuilt, it has a EXT 24foot in Phone: 888-401-6367 702

feed deck 20 foot out feed deck

with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel

Franklin Mulcher is supported on both sides. This Item ID: 99927 is an extremely accurate machine Contact: SAM in ve1y good condition, Cuts 130 Email: Sam@lumbermensco.com feet a minute also has CLT presses.

Phone: 888-401-6367 EXT 702 Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours

on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702 2003 Tigercat 250 Log Loader Item ID: 46268

CARRIAGES & DRIVES

Contact: WALKER 2010 Cardinal HD Carriage Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 Carriages (Sawmill) - Cardinal

Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Dual Arch Skidder

Morbark Barko .....................................

9 395ML Item ID: 99943 Multitek ................................... 12

95Equipment Timberjack Buck (AIM)450 ........ 36 Corley Mfg 32 Item..............................

ID: 12270

Contact: WALKER

Piper's Saw Shop.................... 13 Email: Walker@lumbermensco.com

CRD Metalworks .................... 25 Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR..............

931-797-8029 CW Mill-ArmorHog 17

OR 931-797-3915 Rotochopper ............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler .............................

14 Cat D5H LGP Item ID: 64808 Iron Bull ................................... 21 Contact: AUSTIN Kilgore Saw ............................. 22 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 ................................. 24 Lignomat 931-797-8029

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

Phone: 888-401-6367 EXT 707

Thomas Controls437D ..... 10 2013Industrial John Deere Item ID: 96805 Union Grove Saw & Knife.. 2, 37 Contact: AUSTIN Universal Refiner ................... 23 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 WoodMizer ................................ l

931-797-8029

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom and 36" top saw Logsaw Max 7000 Item ID: 96628

STACKING RAC

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

931-797-8029

Tigercat 630C Item ID: 83971

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 www.BakerProducts.net 931-797-8029 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 23

L O G G I N G

MARKETING DIRECTOR

Contact: SAM Hot Springs, Arkansas Email: Sam@lumbermensco.com www.arkloggers.com

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

Fri, 25 August Item - Sat,ID:2692188 August

Item ID: 84627

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

1997 Timberjack 460 Cable Skidder

Timberjack 460 Dual Arch Item ID: 91657

Item ID:24393

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

OR 931-797-8029

Tree Farmer Grapple - Cable Skidder

Clark 667

Item ID: 37092

L O G G I N G

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

931-797-8029

Item ID: 59500 Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

OR 931-797-8029

Peterson Chipper

‘16 Halverson H140 Item ID: 52045 Skidsteer Contact: AUSTIN (DEMO) Email: Austin@lumbermensco.com Item 888-401-6367 ID: JW-909632 Phone: EXT 703

OR 931-797-8029

Contact: J Williams Ph: (888) 401-6367 x701

JD 437D loader Item ID: 35922

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

931-797-8029

‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

Caterpillar D4H Item ID: 99982

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

OR 931-797-3915

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Deere 440A Ph:John (888) 401-6367 x703

Cable Skidder

Item ID: 99941 with 1700 hours, in very good

Contact: WALKER Email: Walker@lumbermensco.com condition.

Easily produces high Phone: 888-401-6367 EXT 707

OR 931-797-3915 quality chips with patented ‘Cone’

drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644.

Sam x702 Hood 28000 Item ID: 18775 FIREWOOD PROCESSORS

2010 Shop Built Wood Processor Contact: AUSTIN Email: Austin@lumbermensco.com -Phone: It has a 353 Detroit diesel, 888-401-6367 EXT40703

931-797-8029 inch insert tooth circle saw, 30 foot  Issue 364 396

2054 John Deere

‘93Processor BarkoLog 180B Loader

Item ID: 73244 Item ID: 14077 Contact: Austin Contact: AUSTIN Email: Austin@lumbermensco.com Ph: (888) 401-6367 x703 Phone: 888-401-6367 EXT 703

OR 931-797-8029

Transport Trailers Custom Log ‘95 John Deere C6Pup Item ID: JW-538174 Tree Farmer

Contact: Item ID:SAM 13920 Email: Sam@lumbermensco.com Contact: Austin Phone: 888-401-6367 EXT 7021

Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp

motor, Rotobec240B continuous Tigercat Knuckle

John Deere 437D Log Loader

well built processor. Item ID 13820.

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 ‘05 Gehl CTL 70EXT 702

Item ID: 13869 Firewood Processor - This is Contact: SAM aEmail: Chomper Model 16 PDA Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 automatice firewood processor

Loader grapple, Boom 5,000 original hours.

Item ID: 76297 (excellent condition.). Item ID Contact: SAM 13238.

Chris x700 Email: Sam@lumbermensco.com 1995 Barko 775 B Feller Buncher Phone: 888-401-6367 EXT 702

low hours. Control panel includes

on injection pump. always started

Item ID: 8834

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916.John AustinDeere x703

750J Forestry Dozer Best Value Portable Log Splitter Item ID: 62252 - Small manufacturer in PA has

Sam x702

‘06 CAT 517

with John Deere power unit with

tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased

PRENTICE 210E new2005 for $32,500.

Item ID 13865.

LOG LOADER Sam x702

Item ID: 99946

LOGGING EQUIPMENT Contact: WALKER Email: Walker@lumbermensco.com BANDIT Phone: 888-401-6367 EXT 707

- Pumps recently redone. 400 hrs

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with

approximately 1500 hours.

Hour '13 KMC 2500 Tack Skidder Item ID: 14078 meter dont work. The last 2 owners

Contact: made theSAM best valued log splitter.

Email: Sam@lumbermensco.com Phone: 888-401-6367 Handles logs up to EXT 32”.702 Uses

OR 931-797-3915 1999 Bandit 1900 Tracked Disc

have only used it to load trucks or Contact: AUSTIN Email: Austin@lumbermensco.com asPhone: a backup as needed. Has CTR 888-401-6367 EXTa703

OR 931-797-8029 delimber, grapple has been rebuilt.

but electronic option is available.

50% or better. 475 hp Cummins

Item ID 13694. Sam x702

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade a 10’ Johnprocessor Deere with 437D Itema ID: 10075 grapple, log deck. Has hydraulic

chain and kicker that all runs off Contact: AUSTIN Email: Austin@lumbermensco.com of a 4 cylinder Mercedes power Phone: 888-401-6367 EXT 703

931-797-8029 unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine

John Deere 648D

with 850 HP. 5300 Mill in Item ID:hrs.

99942

good condition. Just finished 10 Contact: WALKER

Email:clearing Walker@lumbermensco.com Acre job, ready to work!

Phone: 888-401-6367 EXT 707

OR 931-797-3915 Remote control.

Big production

 List  seLL  exchange  buy  save

Boom cylinders have minor leaks.

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702 2013

John Deere 748H Item BELL ID: 85729

1990 Bell Super T - This Bell has Contact: AUSTIN Email: Austin@lumbermensco.com aPhone: brand new Duetz engine.

888-401-6367 EXTLever 703

931-797-8029 control, 33” bar, pump and tranny ❘

 LumbermensCO.com

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August

Tigercat T240B Item ID: 4266

Contact: AUSTIN The Tree Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 that Started

931-797-8029

it All!

Tigercat 630C

Woods Tigercat 630Publishing C Dual Arch

Item ID: 10836

ADVERTISING SALES

Contact: AUSTIN Morris Woods Email:(888) Austin@lumbermensco.com 401-6367 ext. 704 Phone: 888-401-6367 EXT 703 morris@lumbermens.co

931-797-8029

Cat 573

Item ID: 59580 Item ID: 99947 SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August Sat, 26 August Contact:-AUSTIN

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

OR 931-797-3915

Email: Austin@lumbermensco.com Hot Springs, Arkansas Phone: 888-401-6367 EXT 703 www.arkloggers.com

OR 931-797-8029

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

Boonville, New York www.starwebhosting.net/woodsmen/

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

SATCO 318T Selma, North Carolina Morbark 23 disc chipper processing head www.midatlantic-logging-biomass­ MID-ATLANTIC Item ID: 99944

LOGGING & BIOMASS EXPO

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

OR 931-797-3915

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

EQUIPMENT REPS

Contact: AUSTIN Austin Woods Email:(888) Austin@lumbermensco.com 401-6367 ext. 703 Phone: 888-401-6367 EXT 703 austin@lumbermens.co

931-797-8029

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

2015 Catchanges 563C to: Send address Item ID: 72531 Lumberman's Exchange P.O. Box 1916 Contact: AUSTIN Columbia, TN 38402 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 The Lumberman's OR 931-797-8029 Exchange is

published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Timberjack Exchange, its principles380C and Item ID: 72259 associates, are not held liable for errors or omissions.

Contact: WALKERReproduction, in whole or part, is prohibited with­ Email: Walker@lumbermensco.com out written consent.

Phone: 888-401-6367 EXT 707 ©2017 Woods Publishing

Contact: WALKER Email: Walker@lumbermensco.com KENTUCKY WOOD EXT EXPO Phone: 888-401-6367 707

Fri, 15 SeptOR- 931-797-3915 Sat, 16 Sept

John Deere 648l Item ID: 96378

Cambridge, Ohio www.ohioforest.org

John Deere 437D Item ID: 99939

** INFO LINK**

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

OR 931-797-8029

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

OR 931-797-3915

1988 John Deere 540D

BANDMILLS & HEADSAWS Item ID: 727

Danckaert Resaw - Roughly Contact: Band AUSTIN Email: 10 hoursAustin@lumbermensco.com on this machine since it Phone: 888-401-6367 EXT 703 been rebuilt, 931-797-8029 has it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel

Log Loader/ Excavator 225 LC

is supported onID: both sides. This Item 51519

isContact: an extremely AUSTIN accurate machine Email: Austin@lumbermensco.com in ve1y 888-401-6367 good condition, Cuts 130 Phone: EXT 703

OR 931-797-8029 feet a minute also has CLT presses.

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

2008 Barko 495 ML

Sam x702 Item ID: 7648

CARRIAGES Contact: AUSTIN& DRIVES Email: Austin@lumbermensco.com 2010 Cardinal HD Carriage Phone: 888-401-6367 EXT 703

931-797-8029 Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Excavator 330Lx Link........

Belt36 Buck Equipment (AIM) Item ID: 70897 Corley Mfg .............................. 32

Contact: AUSTIN Email: Austin@lumbermensco.com CRD 888-401-6367 Metalworks ....................

25 Phone: EXT 703

OR 931-797-8029

Morbark ..................................... 9

Timbco 425EXL Barsaw

Multitek ...................................

12 Item ID: 74878

CW Mill-ArmorHog .............. 17

Contact: SAM Piper's Saw Shop.................... 13 Email: Sam@lumbermensco.com Rotochopper ............................

40 Phone: 888-401-6367 EXT 702

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Item ID: 14096 Iron Bull ................................... 21 Contact: AUSTIN Email: Austin@lumbermensco.com Kilgore Saw ............................. 22 Phone: 888-401-6367 EXT 703 Lignomat OR.................................

931-797-8029 24

'01 John Deere 648G3 Thomas Industrial Controls ..... 10 Item ID: 90899 Union Grove Saw & Knife.. 2, 37 Contact: SAM Universal Refiner ................... 23 Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702l WoodMizer ................................

Timbco 445D 14 Hurst‘00 Boiler .............................

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

540B John Deere 48" bottom saw and 36" top saw

Cable Skidder

STACKING RAC

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 or 931-797-3915

Timbco 425C Item ID: 99948

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 www.BakerProducts.net OR 931-797-3915

800.S48.6914 I S73.663.7711

❘ L!  (888) 401-MENS 401-MENS

NO. 25

L O G G I N G

MARKETING DIRECTOR

Sam Wall 1991 Timberjack 450B (888) 401-6367 ext. 702 Item ID: 1826 sam@lumbermens.co

Item ID: 99945 expo.com/

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM MOST WANTED!

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

Cat 527 Swingboom Grapple Skidder Dozer Item ID: 99841

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

2001 John Deere 435 Item ID: 7100

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

931-797-8029

Prentice 2190

Tigercat 845

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

931-797-8029

L O G G I N G

Item ID: 28889

Item ID: 8139

FEATURED!

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

Morbark 30XL Item ID: 13937

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) x703 John 401-6367 Deere 650G Item ID: 99852

Tracked Log Picker/ Skidder Equipment Item ID: 99859

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

‘05 Gehl CTL 70

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916.Timberpro Austin x703

TF830D Combo machine Best Value Portable Log Splitter Item ID: 1360 - Small manufacturer in PA has

98’ Timberjack 240 C

Item ID: 99838 ‘16 Halverson H140 Contact: AUSTIN (DEMO) Skidsteer Email: Austin@lumbermensco.com Phone: EXT 703 Item 888-401-6367 ID:ORJW-909632

931-797-8029

Contact: J Williams Ph: (888) 401-6367 x701

‘95 John C6 Excavator w/RyanDeere DS 28 Felling Head

Contact: AUSTIN Email: Austin@lumbermensco.com ‘13 KMC 2500 EXT Track Phone: 888-401-6367 703

931-797-8029

Contact: Item ID:AUSTIN 13920 Email: Austin@lumbermensco.com Contact: Austin EXT 703 Phone: 888-401-6367 Ph: (888) 931-797-8029 401-6367 x703

Item ID: 79674

Skidder

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703 off onto a conveyor. This is a very

well built processor. Item ID 13820.

VALMET 840.2 FORWARDER

Sam x702 Item ID: 9770 Firewood Contact:Processor AUSTIN - This is Austin@lumbermensco.com aEmail: Chomper Model 16 PDA Phone: 888-401-6367 EXT 703

931-797-8029 automatice firewood processor with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased

50% or better. 475 hp Cummins

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644.

Sam525 x702 CAT

Item ID: 99853 FIREWOOD PROCESSORS

2010 Shop Built Wood Processor Contact: WALKER Email: Walker@lumbermensco.com

-Phone: It has a888-401-6367 353 DetroitEXT diesel, 707 40

OR 931-797-3915

inch insert tooth circle saw, 30 foot  Issue 364 396

Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

Cat 517with a 10’ homemade processor

Item ID: 20725 log deck. Has a hydraulic grapple, Contact: AUSTIN chain kicker that all runs off Email:and Austin@lumbermensco.com Phone: 888-401-6367 703 of a 4 cylinder MercedesEXT power

931-797-8029 unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

knuckleboom, 30' boom, 75hp

motor, Rotobec continuous Cat 525D Grapple

skidder w/Winch grapple, 5,000 original hours.

Item ID: 99857 (excellent condition.). Item ID Contact: SAM x700 13238.

Chris

Email: Sam@lumbermensco.com

Phone: 888-401-6367 EXT 702 1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with

Boom cylinders have minor leaks.

but electronic option is available.

day. Item ID 13882. Austin x703

BARKO

1994 Barko 160B - Electric

Chipper - Cat Under Carriage at

vans and produce 6 - 8 loads per

13HP Honda motor. Manual start

capacity!. Item ID 13421. Sam x702

Sam x702 Item ID: 14033

‘00 Timberjack 1110

quality chips with patented ‘Cone’ drum design. Can easily load 42’

ID: 76226 TreeItem Farmer

approximately 1500 hours.

Franklin Q70 Hour Item ID: 5458 meter dont work. The last 2 owners

new for $32,500. Item ID 13865.

LOGGING EQUIPMENT Contact: AUSTIN Email: Austin@lumbermensco.com BANDIT Phone: 888-401-6367 EXT 703

931-797-8029 1999 Bandit 1900 Tracked Disc

Email: Walker@lumbermensco.com condition.

Easily produces Phone: 888-401-6367 EXT 707 high

OR 931-797-3915

Item ID: 14077

Contact: Contact:AUSTIN Austin Email: Austin@lumbermensco.com Ph: (888) 401-6367 x703 Phone: 888-401-6367 EXT 703

931-797-8029

Timberpro 620

Contact: made theSAM best valued log splitter.

Email: Sam@lumbermensco.com Phone: 888-401-6367 Handles logs up to EXT 32”.702 Uses

with 1700WALKER hours, in very good Contact:

CAT 525C ‘93 Barko 180B Item ID: 4091

Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine Serco 7000 Loader with 850 HP. 5300 Mill in Item ID:hrs.

40498

good condition.

Contact: AUSTIN Just finished 10

Email: Austin@lumbermensco.com Acre clearing job, ready to work!

Phone: 888-401-6367 EXT 703

OR 931-797-8029 Remote control.

Big production

 List  seLL  exchange  buy  save

Contact: AUSTIN have only used it to load trucks or Email: Austin@lumbermensco.com as a backup as needed. Has CTR Phone: 888-401-6367 EXTa703

931-797-8029 delimber, grapple has been rebuilt.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

Hydro Ax 611E Item BELL ID: 58544

1990 Bell Super T - This Bell has Contact: AUSTIN Email: Austin@lumbermensco.com aPhone: brand new Duetz engine.

888-401-6367 EXTLever 703

931-797-8029 control, 33” bar, pump and tranny ❘

 LumbermensCO.com

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August

John Deere 548D Item ID: 64196

Contact: AUSTIN The Tree Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 that Started

931-797-8029

it All!

Boonville, New York www.starwebhosting.net/woodsmen/

John Deere 640D Item ID: 99845

Franklin 170 Woods Publishing Item ID: 99827

ADVERTISING SALES

Contact: WALKER Morris Woods Email: Walker@lumbermensco.com 401-6367 Phone:(888) 888-401-6367 EXT ext.

707 704

OR 931-797-3915 morris@lumbermens.co

Email: Austin@lumbermensco.com Hot Springs, Arkansas Phone: 888-401-6367 EXT 703 www.arkloggers.com

OR 931-797-8029

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept Selma, North Carolina CAT 515 www.midatlantic-logging-biomass­ Item ID: 99856 expo.com/

John Deere 650H Item ID: 50512

MID-ATLANTIC

LOGGING & BIOMASS EXPO

Contact: AUSTIN Contact: WALKER Email: Walker@lumbermensco.com Email: Austin@lumbermensco.com Phone: 888-401-6367 707 WOOD EXT EXPO Phone: 888-401-6367 EXT 703 KENTUCKY

OR 931-797-3915

931-797-8029 Fri, 15 Sept - Sat, 16 Sept

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

EQUIPMENT REPS

Sam Wall '93(888) John Deere 401-6367 ext.548E 702 Item ID: 14184 sam@lumbermens.co

Contact: AUSTIN Austin Woods Email:(888) Austin@lumbermensco.com 401-6367 ext. 703 Phone: 888-401-6367 EXT 703 austin@lumbermens.co

931-797-8029

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER 848Send G Grapple Skidder address changes to:

Item ID: 85843 Lumberman's Exchange P.O. Box 1916 Contact: AUSTIN Columbia, TN 38402 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 The Lumberman's 931-797-8029 Exchange is

published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submittedC5D by advertisers Treefarmer Skidder and writers, the Lumberman's Item ID: 17115 Exchange, its principles and Contact: associates,AUSTIN are not held liable for Email: Austin@lumbermensco.com errors or omissions. Reproduction, Phone: 888-401-6367 EXT 703 or part, is prohibited with­ in whole931-797-8029 out written consent. ©2017 Woods Publishing

Prentice 180 Item ID: 7822

Cambridge, Ohio www.ohioforest.org

Tigercat 615C Item ID: 17058

** INFO LINK**

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

931-797-8029

07 Prentice 950B

Item ID: 5368 BANDMILLS & HEADSAWS

Danckaert Resaw - Roughly Contact: Band AUSTIN Email: Austin@lumbermensco.com 10 hours on this machine since it Phone: 888-401-6367 EXT 703

931-797-8029 has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel

09’ John Deere 700J

is supported onID: both sides. This Item 48601

isContact: an extremely accurate machine AUSTIN Email: Austin@lumbermensco.com in ve1y good condition, Cuts 130 Phone: 888-401-6367 EXT 703 a minute 931-797-8029 feet also has CLT presses.

Item ID 13876. Austin x703

S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

96’ Hydro ax 611E

Sam x702 Item ID: 4654

CARRIAGES Contact: AUSTIN& DRIVES Email: Austin@lumbermensco.com 2010 Cardinal HD Carriage Phone: 888-401-6367 EXT 703

931-797-8029 Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Prentice (AIM) 210 E ........ 36 Buck Equipment Item ID: 98009 Corley Mfg .............................. 32 Contact: AUSTIN Email: Austin@lumbermensco.com CRD Metalworks .................... 25 Phone: 888-401-6367 EXT 703 CW Mill-ArmorHog 931-797-8029 .............. 17

1994 2409B Mor barkTimberjack .....................................

Item ID:74044 Multitek ................................... 12 Contact: WALKER Piper's Saw Shop.................... 13 Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst2011 Boiler .............................

14 Cat 525C Item ID: 26688 Iron Bull ................................... 21

Thomas Industrial Controls..... 10 Item ID: 14187 Union Grove Saw & Knife.. 2, 37 Contact: AUSTIN Email: Austin@lumbermensco.com Universal Refiner ...................

23 Phone: 888-401-6367 EXT 703

931-797-8029 WoodMizer ................................ l

Contact: AUSTIN Kilgore Saw ............................. 22 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 ................................. 24 Lignomat 931-797-8029

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

'04 John Deere 700H

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

John Deere 648G3 Grapple Skidder Item ID: 51014

STACKING RAC

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

2010 Tigercat 724E Item ID: 14247

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 www.BakerProducts.net OR 931-797-8029 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 27

L O G G I N G

MARKETING DIRECTOR

Item ID: 99839 EXPO SOUTHWEST FOREST PRODUCTS Fri, 25 August Sat, Contact: AUSTIN 26 August

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

OR 931-797-3915

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

Cat D6K2 XL

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

John Deere 540D Cable Skidder Item ID: 99277

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

JD 648 G3 Grapple Skidder Item ID: 4572

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

931-797-8029

Treefarmer C7T GM Grapple/Winch Skidder

Item ID: 11726 ‘16 Halverson H140 Contact: AUSTIN Skidsteer (DEMO)

Email: Austin@lumbermensco.com Item ID: JW-909632 EXT 703 Phone: 888-401-6367 Contact: 931-797-8029 J Williams

96’Barko John Deere 643D ‘93 180B Item ID: 14207

Item ID: 14077 Contact: AUSTIN Contact: Austin Email: Austin@lumbermensco.com Ph: (888) 401-6367 Phone: 888-401-6367x703 EXT 703

931-797-8029

Ph: (888) 401-6367 x701

Prentice 2432 (’09)

CAT D4G Skidder Item ID: 99864

L O G G I N G

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

931-797-8029

Item ID: 89885

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709

801-362-2170

Item ID: 99846

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

OR 931-797-3915

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703

John Deere 640D Cable Skidder

with 1700Item hours,ID: in 43930 very good

condition.

Contact: SAMEasily produces high Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

John Deere 648H Grapple FIREWOOD PROCESSORS w/Winch Equipment

2010 ShopItem BuiltID: Wood Processor 99849 -Contact: It has aSAM 353 Detroit diesel, 40 Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

inch insert tooth circle saw, 30 foot  Issue 364 396

Item ID: 10700

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 2500 Track ‘13 KMC 931-797-8029

Skidder

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

Prentice 180E

Franklin 155B Forwarder

Rayco 160 Forestry Mulcher Item ID: 77447

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

‘05 Gehl CTL 70

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

2014 Prentice 2210 Best Value Portable Log Splitter “Self Propelled” - Small manufacturer in PA has Item ID: 99900

off onto a conveyor. This is a very

well built processor. Item ID 13820.

SamJohn x702

Deere 450H LGP

ID: 99891 FirewoodItem Processor - This is aContact: Chomper SAMModel 16 PDA

Email: Sam@lumbermensco.com automatice firewood Phone: 888-401-6367 EXTprocessor 702

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

08’ Valmet 415EX

Sam x702 Item ID: 99923

LOGGING EQUIPMENT BANDIT

Handles logs up EXT to 703 32”.ORUses Phone: 888-401-6367 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

OR1900 931-797-8029 1999 Bandit Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

made the best valued log splitter.

Contact: AUSTIN Email: Austin@lumbermensco.com

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

John Deere 135D Excavator

log deck. Has a hydraulic grapple, chain andItem kickerID: that all runs off 99850 of a 4 cylinder Mercedes power Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine

Timberjack 225 Cable Skidder

with 850 HP. 5300 Mill in Item ID:hrs.

99817

good condition. Just finished 10 Contact: AUSTIN Acre clearing job, ready to work!

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Remote control.

Big production

931-797-8029

 List  seLL  exchange  buy  save

HydroDeere Ax 411 C6 ‘95 John Item ID: 98954 Tree Farmer Contact: AUSTIN

Email: ItemAustin@lumbermensco.com ID: 13920 Phone: 888-401-6367 EXT 703 Contact: Austin

931-797-8029

Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

Cat 559B Knuckle

grapple,Boom 5,000 original hours.

Loader

Item ID: 99872 (excellent condition.).

Item ID 13238.

Chris Contact: SAMx700

Email: Sam@lumbermensco.com

1995 Barko 775 B Feller Buncher Phone: 888-401-6367 EXT 702

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours.

540B John DeereHour

Cable meter dont work.Skidder The last 2 owners Contact: have onlyWALKER used it to load trucks or Email: Walker@lumbermensco.com

as a backup as needed.EXT Has a CTR Phone: 888-401-6367 707 or 931-797-3915

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

Bell Ultra-C Tracked BELL Cutter

1990 Bell Super T - This Bell has Item ID: 46567

aContact: brandSAM new Duetz engine. Lever Email: Sam@lumbermensco.com

Phone: 888-401-6367 EXT 702 control, 33” bar, pump and tranny

❘

 LumbermensCO.com

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August

Hydro AX 721E Item ID: 99826

Contact: AUSTIN The Tree Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 that Started

OR 931-797-8029

it All!

Boonville, New York www.starwebhosting.net/woodsmen/

Item ID: 84253

BarkoPublishing 495B Woods Item ID: 44764

ADVERTISING SALES

Contact: AUSTIN Morris Woods Email:(888) Austin@lumbermensco.com 401-6367 ext. 704 Phone: 888-401-6367 EXT 703 morris@lumbermens.co

931-797-8029

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept Selma, Carolina 380A ‘89 North Timberjack www.midatlantic-logging-biomass­ Item ID: 14039 expo.com/

John Deere 648G3

Item ID: 58995 MID-ATLANTIC

LOGGING & BIOMASS EXPO

Contact: AUSTIN Contact: AUSTIN Email: Austin@lumbermensco.com Email: Austin@lumbermensco.com WOOD EXPO Phone: 888-401-6367 EXT 703 Phone: 888-401-6367 EXT 703 KENTUCKY Sept931-797-8029

931-797-8029 Fri, 15 - Sat, 16 Sept

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 Tigercat 604 Cable Skidder sam@lumbermens.co Item ID: 6552 Austin Woods Contact: SAM 401-6367 ext. 703 Email:(888) Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 austin@lumbermens.co

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

John LGP Send Deere address 650K changes to: Forestry Dozer Lumberman's Exchange Item P.O. ID: Box85213 1916

TN 38402 Contact:Columbia, SAM Email: Sam@lumbermensco.com Phone: 888-401-6367Exchange EXT 702 is The Lumberman's

published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content

by Bar advertisers '97 Hydrosubmitted AX-411 EX Saw Head and writers, theID: Lumberman's Item 98754 Exchange, its principles and associates,SAM are not held liable for Contact: errors or omissions. Reproduction, Email: Sam@lumbermensco.com in whole888-401-6367 or part, is prohibited with­ Phone: EXT 702 out written consent. ©2017 Woods Publishing

CAT 525C

Item ID: 13443

Cambridge, Ohio www.ohioforest.org Timberpro TL735B Tracked Feller Buncher Item ID: 64107

** INFO LINK**

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

OR 931-797-8029

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

2001 Cat 311CU Processor/ BANDMILLS- Fabtech & HEADSAWS Harvestor head

DanckaertItem BandID: Resaw - Roughly 99821 10 hours on this machine since it Contact: AUSTIN Email: Austin@lumbermensco.com

Phone: 888-401-6367 703 OR 931-797-8029 has been rebuilt,EXT it has a 24foot in

feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel

Cable Skidder

is supported on both sides. This Item ID: 5597

is an extremely accurate machine Contact: AUSTIN

Email: in ve1yAustin@lumbermensco.com good condition, Cuts 130 Phone: 888-401-6367 EXT 703

OR 931-797-8029 feet a minute also has CLT presses.

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

JD 648H (’08)

Sam x702 Item ID: 6051

CARRIAGES & DRIVES

Contact: JOE

Email: Joe@lumbermensco.com 2010 Cardinal HD Carriage Phone: 888-401-6367 EXT 709

OR 801-362-2170 Carriages (Sawmill) - Cardinal

Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Buck Equipment (AIM) ........ 36 Item ID: 13948 Corley Mfg .............................. 32 Contact: AUSTIN Email: Austin@lumbermensco.com CRD Metalworks ....................

Phone: 888-401-6367 EXT 70325 CW Mill-ArmorHog OR 931-797-8029 .............. 17

Morbark .....................................

9 Item ID: 12453

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

‘98 611 Ex-Hydro Ax

2011 CAT 525C Hurst Boiler ............................. 14

Item ID: 14203 Iron Bull ................................... 21 Contact: AUSTIN Email: Austin@lumbermensco.com Kilgore Saw .............................

Phone: 888-401-6367 EXT 70322

931-797-8029 Lignomat ................................. 24

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

‘85 John Deere 440D

Multitek ...................................

12 Contact: AUSTIN Email: Austin@lumbermensco.com Phone:Saw 888-401-6367 EXT 703 Piper's Shop....................

13

OR 931-797-8029 Rotochopper............................ 40

‘05 Tigercat 230B

Thomas Industrial Controls..... 10 Item ID: 13911 Union Grove Saw & Knife.. 2, 37 Contact: AUSTIN Email: Austin@lumbermensco.com Universal Refiner ...................

23 Phone: 888-401-6367 EXT 703

OR................................

931-797-8029 WoodMizer l

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom 36" top saw 648saw G and Skidder Item ID: 76963

STACKING RAC

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

931-797-8029

John Deere 640D Item ID:63000

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 29

L O G G I N G

MARKETING DIRECTOR

Item ID: 25974 SOUTHWEST FOREST PRODUCTS EXPO Contact:-SAM Fri, 25 August Sat, 26 August

Contact: AUSTIN Email: Sam@lumbermensco.com Email: Austin@lumbermensco.com Hot Springs, Arkansas Phone: 888-401-6367 EXT 703 Phone: 888-401-6367 EXT 702 www.arkloggers.com

931-797-8029

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

Log Loader

Timbco 425Exl

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

JD 640D (’95) 2003 CAT 525B Item ID: 3800

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

Item ID: 51746

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709

801-362-2170

Tigercat 234B Knuckle boom loader

‘80 John Deere 550 Item ID: 14037

L O G G I N G

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

931-797-8029

Item ID: 99820

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Item ID: 1020

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

OR 931-797-8029

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888)Deere 401-6367 x703 John Logger Item ID: 82959

with 1700 hours, in very good Contact: SAM condition.

Easily produces high Email: Sam@lumbermensco.com Phone:chips 888-401-6367 EXT‘Cone’ 702 quality with patented drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

D5H Sam TSKx702 Grapple ItemCat ID 13644.

Winch Dozer FIREWOOD PROCESSORS

Item ID: 99809 2010 Shop Built Wood Processor

Contact: SAM -Email: It hasSam@lumbermensco.com a 353 Detroit diesel, 40 Phone: 888-401-6367 702 inch insert tooth circleEXT saw, 30 foot

 Issue 364 396

Phone:ID: 888-401-6367 EXT 709 Item JW-909632

OR 801-362-2170 Contact: J Williams Ph: (888) 401-6367 x701

‘80 John Deere 540B Item ID: 11345

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 703 ‘13 KMC 2500 EXT Track

OR 931-797-8029

Skidder

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

John Deere 437C

CAT 525D

Item ID: 9555H140 ‘16 Halverson Contact: JOE Skidsteer (DEMO) Email: Joe@lumbermensco.com

off onto a conveyor. This is a very

‘80 John Deere 550 Item ID: 14037

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 CTL 70 ‘05 Gehl 931-797-8029

Item ID: JW-986495 Contact: J Williams FEATURED HOT-BUY! Ph: (888) 401-6367 x701

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID

Cat Austin D4H TSK 13916. x703 Grapple w/ Winch Equipment Best Value Portable Log Splitter Item ID: 99843 - Small manufacturer in PA has

well built processor. Item ID 13820.

648 E Cable Skidder

Sam x702 Item ID: 87791 Firewood Processor - This is Contact: AUSTIN Austin@lumbermensco.com aEmail: Chomper Model 16 PDA Phone: 888-401-6367 EXT 703

931-797-8029 automatice firewood processor with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500.

Item ID 13865.

Timbco 425D Sam x702 Item ID: 98053

LOGGING EQUIPMENT Contact: AUSTIN Email: Austin@lumbermensco.com BANDIT EXT 703 Phone: 888-401-6367

Contact: SAM made best valued log splitter.

Email:the Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 Handles logs up to 32”.

Uses

931-797-8029 1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

Johnprocessor Deerewith 85Da 10’ homemade

Item ID: 48169 log deck. Has a hydraulic grapple, Contact: AUSTIN chain kicker that all runs off Email:and Austin@lumbermensco.com Phone: 888-401-6367 703 of a 4 cylinder MercedesEXT power

931-797-8029 unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 -

John Deere 3412 Caterpillar Diesel700H engine

Item ID: 1324 with 850 HP. 5300 hrs. Mill in Contact: AUSTIN good condition.

Just finished 10 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Acre clearing job, ready to work!

931-797-8029 Remote control. Big production

 List  seLL  exchange  buy  save

‘93John Barko 180B Deere 548G3

ID: 985 Item ID:Item 14077 Contact:AUSTIN Austin Contact: Email: Austin@lumbermensco.com Ph: (888) 401-6367 x703 Phone: 888-401-6367 EXT 703

OR 931-797-8029

‘95 Deere C6 ‘05John Timberjack 608B Item ID: 13898 Tree Farmer

Contact: Item ID:SAM 13920 Email: Sam@lumbermensco.com Contact: Austin Phone: 888-401-6367 702 Ph: (888) 401-6367 EXT x703

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp

motor, Rotobec continuous Timberjack 1270C Itemoriginal ID: 8676 grapple, 5,000 hours.

(excellent condition.). Item ID Contact: JOE Email: Joe@lumbermensco.com 13238. x700 Phone:Chris 888-401-6367 EXT 709

OR 801-362-2170 1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with

PARTS Timberjack 450 C Cable Skidder

approximately 1500 hours. Hour

meter dontItem work.

The last 2 owners ID: 5077 have only used it to load trucks or Contact: AUSTIN

Email: Austin@lumbermensco.com as a backup as needed. Has a CTR Phone: 888-401-6367 EXT 703

931-797-8029 delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702‘08

John Deere 335C Item ID: 14089 BELL

Contact: AUSTIN 1990 Bell Super T - This Bell has Email: Austin@lumbermensco.com 888-401-6367 EXTLever 703 aPhone: brand new Duetz engine.

OR 931-797-8029 control, 33” bar, pump and tranny ❘

 LumbermensCO.com

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August

John Deere 850K LGP Item ID: 99814

Contact: SAM The Tree Email: Sam@lumbermensco.com that Started Phone: 888-401-6367 EXT 702

it All!

Boonville, New York www.starwebhosting.net/woodsmen/

Item ID: 14218

Woods Publishing

Skidder

Item ID: 53891 ADVERTISING SALES Morris Woods

Contact: SAM 401-6367 ext. 704 Email:(888) Sam@lumbermensco.com morris@lumbermens.co Phone: 888-401-6367 EXT 702

SOUTHWEST FOREST PRODUCTS EXPO

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

‘02 Jackson Shavings Mill Selma, North Carolina 2004 Timbco 445EXL Item ID: 13736 MID-ATLANTIC

www.midatlantic-logging-biomass­ Item ID: 14170 expo.com/

Contact: AUSTIN Contact: AUSTIN Email: Austin@lumbermensco.com Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 KENTUCKY WOOD EXPO Phone: 888-401-6367 EXT 703

OR 931-797-8029 Sept931-797-8029 Fri, 15 - Sat, 16 Sept LOGGING & BIOMASS EXPO

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

EQUIPMENT REPS

Sam Wall 2016 Tigercat 604 E Cable (888) 401-6367 ext. Skidder 702 Item ID:55393 sam@lumbermens.co

532 CAT Feller Buncher

Contact: WALKER Austin Woods Email:(888) Walker@lumbermensco.com 401-6367 ext. 703 Phone: 888-401-6367 EXT 707 austin@lumbermens.co

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

OR 931-797-8029

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

16’ CAT 545D

Send address changes to: Item ID: 14211 Lumberman's Exchange P.O. Box 1916 Contact: AUSTIN Email: Austin@lumbermensco.com Columbia, TN 38402

Phone: 888-401-6367 EXT 703 The Lumberman's 931-797-8029 Exchange is

published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content by advertisers 93’submitted Prentice 210 and writers, theID: Lumberman's Item 14216 Exchange, its principles and Contact: associates,AUSTIN are not held liable for Email: Austin@lumbermensco.com errors or omissions. Reproduction, Phone: EXT 703 in whole888-401-6367 or part, is prohibited with­

931-797-8029 out written consent. ©2017 Woods Publishing

Item ID: 14079

Cambridge, Ohio www.ohioforest.org

Timbco 820D Item ID: 18370

** INFO LINK**

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

931-797-8029

‘04 Fabtek 344B

BANDMILLS & HEADSAWS Item ID: JW-093430

Danckaert Band Resaw - Roughly Contact: SAM 10 hoursSam@lumbermensco.com on this machine since it Email: has been rebuilt, it has a EXT 24foot in Phone: 888-401-6367 702 feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough

pressure Top Casting wheel Johnguides.

Deere 700K LGP

Dozer is supported on both sides. This Item ID: 3674 is an extremely accurate machine Contact: SAM in ve1y good condition, Cuts 130 Email: Sam@lumbermensco.com

Phone: 888-401-6367 feet a minute also has EXT CLT702 presses.

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours07’ ready to run. Item ID 13434.

Tigercat 620C

Sam x702 Item ID: 14248

CARRIAGES Contact: AUSTIN& DRIVES Email: Austin@lumbermensco.com 2010 Cardinal HD Carriage Phone: 888-401-6367 EXT 703

931-797-8029 Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

10’ Equipment John Deere 648H Buck (AIM) ........ 36 Item ID: 14210 Corley Mfg .............................. 32 Contact: AUSTIN Email: Austin@lumbermensco.com CRD Metalworks .................... 25 Phone: 888-401-6367 EXT 703

931-797-8029 CW Mill-ArmorHog .............. 17

John Deere 437E Mor bark .....................................

9 Knuckleboom Loader Item ID: 63181 Multitek ...................................

12

Contact: SAM Piper's Saw Shop.................... 13 Email: Sam@lumbermensco.com

Phone: 888-401-6367 EXT 702 40 Rotochopper ............................

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler .............................

12’ John Deere 437D 14 Item ID: 14209 Iron Bull ................................... 21 Contact: AUSTIN Kilgore Saw ............................. 22 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 ................................. 24 Lignomat 931-797-8029

Thomas Industrial Controls..... 10 JD 643G Item ID: 80565 Union Grove Saw & Knife.. 2, 37

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

Contact: JOE

Universal Refiner ................... 23 Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 WoodMizer l

OR................................

801-362-2170

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" 12’ bottom sawDeere and 36" top saw John 843K Item ID: 14212

STACKING RAC

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

931-797-8029

John Deere 650H LGP Forestry Dozer Item ID: 99810

Contact: SAM Email: Sam@lumbermensco.com www.BakerProducts.net Phone: 888-401-6367 EXT 702

800.S48.6914 I S73.663.7711

❘ L!  (888) 401-MENS 401-MENS

NO. 31

L O G G I N G

MARKETING DIRECTOR

Item ID: 14217

Contact:-AUSTIN Fri, 25 August Sat, 26 August Contact: AUSTIN Email: Austin@lumbermensco.com Email: Austin@lumbermensco.com Hot Springs, Arkansas EXT 703 Phone: 888-401-6367 Phone: 888-401-6367 EXT 703 www.arkloggers.com

931-797-8029

931-797-8029

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER John Deere 540G2 Cable

2011 John Deere 648H

07’ Tigercat 724E

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

L O G G I N G

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

Timberjack 380C Item ID: 410

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

OR 931-797-8029

90's Model Timberjack 240A Item ID: 14111

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

John Deere 200D Excavator Item ID: 2959

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

CAT 140G

Item ID: 93592 Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

OR 931-797-8029

Item ID: 45399

S A W M I L L

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Jackson Lumber Ph: (888) 401-6367 x703

Harvester Circle Mill

Corley Complete Sawmill Item ID: 14035

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

OR 931-797-8029

‘05 Gehl CTL 70

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID

Quality 4 Head 13916.

Austin x703 Trim Saw

Item ID: 2346 with 1700 hours, in very good Contact: SAM condition.

Easily produces high Email: Sam@lumbermensco.com Phone:chips 888-401-6367 EXT‘Cone’ 702 quality with patented

ID: 1559 Best ValueItem Portable Log Splitter AUSTIN in PA has -Contact: Small manufacturer Email: Austin@lumbermensco.com Phone: 703 made the888-401-6367 best valued logEXT splitter.

931-797-8029 Handles logs up to 32”. Uses

vans and produce 6 - 8 loads per

but electronic option is available.

drum design. Can easily load 42’ day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

Breezewood Band Mill FIREWOOD PROCESSORS Item ID: 83736

2010 Shop Built Wood Processor Contact: SAM -Email: It has aSam@lumbermensco.com 353 Detroit diesel, 40 Phone: 888-401-6367 EXT30702 inch insert tooth circle saw, foot  Issue 364 396

Item ID: 42920 ‘16 Halverson H140 Skidsteer Contact: SAM (DEMO) Email: ID: Sam@lumbermensco.com Item JW-909632 Phone: 888-401-6367 EXT 702 Contact: J Williams Ph: (888) 401-6367 x701

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

John Deere 859M homemade processor withw/ a 10’ Tracked Cutter log Quadco deck. Has a3200 hydraulic grapple, Barsaw 31379 chain andItem kickerID: that all runs off Contact: SAM Mercedes power of a 4 cylinder Email: Sam@lumbermensco.com

Phone: 888-401-6367 EXT 702 unit.

Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Tigercat 234 Knuckle Boom Loader ‘93 Barko 180B Item ID: 68516

Item ID: 14077 Contact: Austin Contact: SAM Ph: (888) 401-6367 x703 Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

01’ Ponsee Bison Forwarder

‘95 Barko John 160B Deere Self-C6 Propelled Loader TreeItem Farmer ID: 99812

Item ID: 14109

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 2500 Track ‘13 KMC OR 931-797-8029

Skidder

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

Meadows 2 Deluxe Sawmill Package Miner Edger

Yanmar VIO27-2 mini-x

off onto a conveyor. This is a very

well built processor. Item ID 13820.

Rhottne F-11 Sam x702

Item ID: 99976 Firewood Processor - This is Contact: WALKER

Walker@lumbermensco.com aEmail: Chomper Model 16 PDA Phone: 888-401-6367 EXT 707

OR 931-797-3915 automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new forBaker $32,500.Bandmill Item ID 13865.

Sam x702 Item ID: 96085

LOGGING EQUIPMENT

Item ID: 13920

Contact: SAM Contact: Austin Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702x703 Ph: (888) 401-6367

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

John Deere 540G3

grapple, 5,000 original hours.

Item ID: 99991 (excellent condition.). Item ID Contact: WALKER

Email: Walker@lumbermensco.com 13238.

Chris x700 Phone: 888-401-6367 EXT 707

OR 931-797-3915 1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours.

Hour 2017 Eco Log 688D

Item ID:The 99994 meter dont work. last 2 owners

Contact: SAM BANDIT Email: Sam@lumbermensco.com Phone: 888-401-6367 702 1999 Bandit 1900 TrackedEXT Disc

have only used it to load trucks or Contact: AUSTIN Email: Austin@lumbermensco.com as a backup as needed. Has CTR Phone: 888-401-6367 EXTa703

OR 931-797-8029 delimber, grapple has been rebuilt.

50% or better. 475 hp Cummins

Item ID 13694. Sam x702

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 -

Cornell Edger 3412 Caterpillar Diesel engine

Item ID: 33423 with 850 HP. 5300 hrs. Mill in Contact: AUSTIN good condition.

Just finished 10 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Acre clearing job, ready to work!

931-797-8029 Remote control. Big production

 List  seLL  exchange  buy  save

Boom cylinders have minor leaks.

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

Woodmizer LT300 Item BELL ID: 99975

1990 Bell Super T - This Bell has Contact: AUSTIN Email: Austin@lumbermensco.com

aPhone: brand new Duetz engine.

Lever 888-401-6367 EXT 703

931-797-8029

control, 33” bar, pump and tranny ❘

 LumbermensCO.com

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August

Baker Double End Trim Saw Item ID: 49890

The Tree Contact: SAM Email: Sam@lumbermensco.com that Started Phone: 888-401-6367 EXT 702 it All!

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

Hud-Son 360 Portable Sawmill Woods Publishing Item ID: 8841

ADVERTISING SALES

Contact: AUSTIN Morris Woods Email:(888) Austin@lumbermensco.com 401-6367 ext. 704 Phone: 888-401-6367 EXT 703 morris@lumbermens.co

931-797-8029

Meadows #2 Deluxe

Baker Notcher

Item ID: 14250 Item ID: 49307 SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August Sat, 26 August Contact:-AUSTIN

Email: Austin@lumbermensco.com Hot Springs, Arkansas Phone: 888-401-6367 EXT 703 www.arkloggers.com

OR 931-797-8029

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept '02 Woodmizer LT-40 Super HD Selma, North Carolina Cornell Double End Trim Saw Item ID: 14118

MID-ATLANTIC

www.midatlantic-logging-biomass­ Item ID: 6307 expo.com/

LOGGING & AUSTIN BIOMASS EXPO Contact: Contact: AUSTIN Email: Austin@lumbermensco.com Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 KENTUCKY WOOD EXPO Phone: 888-401-6367 EXT 703

OR 931-797-8029 Sept OR 931-797-8029 Fri, 15 - Sat, 16 Sept

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

EQUIPMENT REPS

Sam Wall 03’ Woodmizer LT-300ext.

Operation (888) 401-6367 702 Item ID: 14171 sam@lumbermens.co

Desjardin Shingle Mill

Contact: Austin AUSTIN Woods Email: Austin@lumbermensco.com (888) 401-6367 ext.

703 Phone: 888-401-6367 EXT 703 austin@lumbermens.co

OR 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

931-797-8029

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

HOT BUY! May be sent to­ HOT BUY! morris@lumbermens.co HOT BUY!

POSTMASTER

Cook's AC-36 & AP-4 Send address changes to: Sawmill & Exchange Edger Lumberman's Item P.O. ID: Box62024 1916

Columbia, TN 38402

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367Exchange EXT 702 is The Lumberman's

published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the 2 Lumberman's Hurdle Sawmill Exchange,Item its principles and ID: 72999 associates, are not held liable for errors or omissions.

Reproduction, Contact: SAM in whole or part, is prohibited with­ Email: Sam@lumbermensco.com out written consent.

Phone: 888-401-6367 EXT 702 ©2017 Woods Publishing

Item ID: 63655

Cambridge, Ohio Fence Post Processing www.ohioforest.org

Operation

Item ID: 42175

** INFO LINK**

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

931-797-8029

Real Tuff BANDMILLS & Bagger HEADSAWS Item ID: 50281

Danckaert Band Resaw - Roughly Contact: AUSTIN 10 hoursAustin@lumbermensco.com on this machine since it Email: Phone: 888-401-6367 EXT 703 has it has a 24foot in been rebuilt, OR 931-797-8029 feed deck 20 foot out feed deck

with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel

Go Fast Run Around System

is supported on both sides. This Item ID: 84282 is an extremely accurate machine Contact: SAM in ve1y Sam@lumbermensco.com good condition, Cuts 130 Email: Phone: 888-401-6367 EXT 702 feet a minute also has CLT presses.

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400

LT40 hours Wood-Mizer ready to run. Item ID 13434.

Item ID: 13995 Sam x702 Contact: AUSTIN& DRIVES CARRIAGES Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 2010 Cardinal HD Carriage

OR 931-797-8029 Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

'02 WoodMizer LT-40 Buck Equipment (AIM) ........ 36 Item ID: 11345 Corley Mfg .............................. 32 Contact: AUSTIN Email: Austin@lumbermensco.com CRD Metalworks .................... 25 Phone: 888-401-6367 EXT 703 CW Mill-ArmorHog OR 931-797-8029 .............. 17

Rogers 4 Headblock Circle Mill Mor bark .....................................

9 Item ID: 23205 Multitek ................................... 12 Contact: SAM Piper's Saw Shop.................... 13 Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 Rotochopper ............................

40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Edmiston Complete Sawmill

Hurst Boiler 14 Item.............................

ID: 14084

Iron BullAUSTIN ................................... 21 Contact: Email: Austin@lumbermensco.com Kilgore888-401-6367 Saw .............................

Phone: EXT 70322

OR 931-797-8029 Lignomat ................................. 24

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

Cook 3238 HD Portable Thomas Industrial ControlsSawmill ..... 10 Item ID: 90653 Union Grove Saw & Knife.. 2, 37 Contact: AUSTIN Universal Refiner ................... 23 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 WoodMizer ................................ l

931-797-8029

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

Morbark Stac Trac Item ID: 64060

STACKING RAC

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

931-797-8029

Meadows #3 Complete Operation Item ID: 964

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 www.BakerProducts.net OR 931-797-8029 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 33

S A W M I L L

MARKETING DIRECTOR

Boonville, New York www.starwebhosting.net/woodsmen/

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

Woodmizer Twin Blade Diesel Edger

Danchaert Band Resaw

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

OR 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

OR 931-797-8029

Precision Scragg

‘14 Hurdle 3-HD Block Sawmill

S A W M I L L

Item ID: 14191

Item ID: 3607

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

931-797-8029

Item ID: 13876

Item ID: 13997

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

OR 931-797-8029

S&W 125 High Production Mill

Woodmizer LT 3000 Operation

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

OR 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 ‘05 Gehl OR 931-797-8029 CTL 70

M I S C E L L A N E O U S

‘83 John Deere 4850

Item ID: 14073 Contact: Austin '97(888) Mack 300 Truck Ph: 401-6367 x703 Item ID: 44852

with 1700 hours, in very good Contact: AUSTIN Email: Austin@lumbermensco.com condition.

Easily produces Phone: 888-401-6367 EXThigh 703

931-797-8029 quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

ItemMack ID 13644.

Sam x702 Picker Truck

FIREWOOD PROCESSORS Barko 80 Loader

Item ID: 10761

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID

Paccair 13916. Austin x703 Winch

Contact: J Williams Ph: (888) 401-6367 x701

'94 Barko 160 Knuckleboom Item ID: 14186

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 2500 Track ‘13 KMC OR 931-797-8029

Skidder

off onto a conveyor. This is a very

well built processor. Item ID 13820.

Sanborn Scragg Mill

Sam x702 Item ID: 14050

Firewood Processor - This is Contact: AUSTIN Austin@lumbermensco.com aEmail: Chomper Model 16 PDA Phone: 888-401-6367 EXT 703 automatice firewood processor

OR 931-797-8029 with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased

-Contact: Small manufacturer AUSTIN in PA has Email: Austin@lumbermensco.com made the888-401-6367 best valued logEXT splitter.

Phone: 703

931-797-8029 Handles logs up to 32”. Uses but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

99847 2010 ShopItem BuiltID: Wood Processor Phone: 888-401-6367 EXT 702 inch insert tooth circle saw, 30 foot

Phone: 888-401-6367 EXT 702 unit.

Has a 4’ chain saw that kicks

 Issue 364 396

Email: Sam@lumbermensco.com Item ID: JW-909632 Phone: 888-401-6367 EXT 702

Cornell new for $32,500. Gang Item IDSaw 13865.

Item ID: 12432 Sam x702 Contact: AUSTIN LOGGING EQUIPMENT Email: Austin@lumbermensco.com Phone: 888-401-6367 BANDIT EXT 703

OR 931-797-8029 1999 Bandit 1900 Tracked Disc

ID: 86536 Best ValueItem Portable Log Splitter

log deck.

HasGenerator a hydraulic grapple, Cat C15 Set Item ID: 99858 chain and kicker that all runs off

-Contact: It has aSAM 353 Detroit diesel, 40 Email: Sam@lumbermensco.com

‘16 Halverson H140 Item ID: 62784 Skidsteer Contact: SAM (DEMO)

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

Item ID: 8019

Mobile Dimensions Model 12 Circle Saw

Contact: SAM Mercedes power of a 4 cylinder Email: Sam@lumbermensco.com

Lumbermens™  since 1986

❘

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 -

Pup Trailers 3412 Caterpillar Diesel engine Item ID:hrs.

53363 with 850 HP. 5300 Mill in

good condition.

Just finished 10 Contact: AUSTIN Email: Austin@lumbermensco.com Acre clearing job, ready to work!

Phone: 888-401-6367 EXT 703

931-797-8029 Remote control. Big production

 List  seLL  exchange  buy  save

Pendu Cut180B Off Saw ‘93 Barko

Item ID: 10632 Item ID: 14077 Contact:AUSTIN Austin Contact: Email: Austin@lumbermensco.com Ph: (888) 401-6367 x703 Phone: 888-401-6367 EXT 703

OR 931-797-8029

‘13 4000 Sawmill ‘95Woodmizer John Deere C6 Item ID: 14000

Tree Farmer Contact: AUSTIN

Email: ItemAustin@lumbermensco.com ID: 13920 Phone: 888-401-6367 EXT 703 Contact:

ORAustin 931-797-8029

Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

Corinth American Sawmill

grapple, 5,000 hours.

Itemoriginal ID: 99844

(excellent condition.). Item ID Contact: AUSTIN

Email: Austin@lumbermensco.com 13238.

Chris x700 Phone: 888-401-6367 EXT 703

931-797-8029 1995 BarkoOR775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with

1996 Jackson Shavings Mill approximately 1500 hours. Hour Item ID: 1271 meter dont work. The last 2 owners Contact: AUSTIN have only used it to load trucks or Email: Austin@lumbermensco.com Phone: 888-401-6367 EXTa703 as a backup as needed. Has CTR

OR 931-797-8029 delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702Transcraft Trailer Item BELL ID: 45261

1990 Bell Super T - This Bell has Contact: AUSTIN Austin@lumbermensco.com aEmail: brand new Duetz engine.

Phone: 888-401-6367 EXTLever 703

931-797-8029 control, 33” bar, pump and tranny ❘

 LumbermensCO.com

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August

'93 KW 425 CAT Item ID:13342

The Tree

Contact: WALKER that Started Email: Walker@lumbermensco.com Phone: 888-401-6367 it All! EXT 707

Boonville, New York www.starwebhosting.net/woodsmen/

Item ID: 43812

‘06 Cord King Model 60 Woods Publishing

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

ADVERTISING SALES

Morris Woods Contact: AUSTIN Email:(888) Austin@lumbermensco.com 401-6367 ext. 704 Phone: 888-401-6367 EXT 703 morris@lumbermens.co

OR 931-797-8029

MARKETING DIRECTOR

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Selma, North Carolina Prentice 410EX truck mounted www.midatlantic-logging-biomass­ knuckle boom loader expo.com/

Shop Built Wood Processor Item ID: 14038 MID-ATLANTIC

LOGGING & BIOMASS EXPO

Item ID: 70691 Contact: AUSTIN Email: Austin@lumbermensco.com KENTUCKY WOOD EXPO Contact: SAM Phone: 888-401-6367 EXT 703 Email: Sam@lumbermensco.com Fri, 15 Sept - Sat, 16EXTSept

OR 931-797-8029 Phone: 888-401-6367 702

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

EQUIPMENT REPS

Sam Wall (888) ext. 702 1990401-6367 Freightliner sam@lumbermens.co Item ID: 7422 Austin Woods Contact: AUSTIN 401-6367 ext. 703 Email:(888) Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 austin@lumbermens.co

931-797-8029

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

Send address changes to: '08 Dynamic Chipper

Lumberman's Exchange Item ID: 14196 P.O. Box 1916 Contact: SAM TN 38402 Columbia,

Email: Sam@lumbermensco.com Phone: 888-401-6367 EXTis702 The Lumberman's Exchange

published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of Marmon Picker Truck content submitted by advertisers & Pup Trailer and writers, the Lumberman's Item ID: 59341 Exchange, its principles and associates, are not held liable for Contact: SAM errors or omissions. Reproduction, Email: Sam@lumbermensco.com in whole or part, is prohibited with­ Phone: 888-401-6367 EXT 702 out written consent. ©2017 Woods Publishing

‘15 Cord King M44 Item ID: 13961

Cambridge, Ohio www.ohioforest.org

W6F Allied Systems Winch Item ID: 56032

** INFO LINK**

Case FLX437 Floater BANDMILLS & HEADSAWS Picker Log Truck

DanckaertItem BandID: Resaw - Roughly 18710 10 hours on this machine since it Contact: SAM Email: Sam@lumbermensco.com

has been rebuilt, it has a 24foot in Phone: 888-401-6367 EXT 702 feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel

Morbark 58” LIKE NEW

is supported on ID: both6114 sides. This Item

isContact: an extremely accurate machine AUSTIN Email: Austin@lumbermensco.com in ve1y good condition, Cuts 130 Phone: 888-401-6367 EXT 703 feet has CLT presses. a minute OR also 931-797-8029 Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hoursPatriot ready to run.

Item ID 13434.

GBN Nailer

Sam x702 Item ID: 99886

CARRIAGES Contact: SAM & DRIVES Email: Sam@lumbermensco.com 2010 Cardinal HD Carriage Phone: 888-401-6367 EXT 702 Carriages (Sawmill) - Cardinal

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

OR 931-797-8029

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Buck (AIM) ........ 36 LT50Equipment Wide, EG200 Edger,

Item ID: 14576 Multitek ...................................

12 Contact: WALKER Email: Walker@lumbermensco.com Piper's Shop....................

13 Phone:Saw 888-401-6367 EXT 707 or 931-797-3915 Rotochopper ............................ 40

Sharpener/Setter Corley Mfg .............................. 32 Item ID: 60876 CRD Metalworks .................... 25 Contact: SAM

Email: Sam@lumbermensco.com CW Mill-ArmorHog .............. 17 Phone: 888-401-6367 EXT 702

AM General M818 Army Truck Morbark ..................................... 9

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14 4700 International Lube Truck Item ID: 61127 Iron Bull ...................................

21

Contact: SAM............................. 22 Kilgore Saw Email: Sam@lumbermensco.com Lignomat .................................

Phone: 888-401-6367 EXT 702 24

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

2007 Industrial Morbark Chipper Thomas Controls ..... 10 Item ID: 9658 Union Grove Saw & Knife.. 2, 37 Contact: WALKER Email: Walker@lumbermensco.com Universal Refiner ................... 23 Phone: 888-401-6367 EXT 707 WoodMizer l or ................................

931-797-3915

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

Carriage line it includes carriage with onboard log turners, carriage drive, hyd pac for carriage,

CATsaw Generators 48" bottom and 36" top saw Item ID: 56046

STACKING RAC

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

931-797-8029

Nova Dry Kiln Item ID: 83618

Contact: SAM Email: Sam@lumbermensco.com www.BakerProducts.net Phone: 888-401-6367 EXT 702

800.S48.6914 I S73.663.7711

❘ L!  (888) 401-MENS 401-MENS

NO. 35

M I S C E L L A N E O U S

Item ID: 14068

'87 Peterbuilt SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August -Item Sat,ID: 261101 August

Contact: AUSTIN Email: Austin@lumbermensco.com Hot Springs, Arkansas Contact: AUSTIN Phone: 888-401-6367 EXT 703 Email: Austin@lumbermensco.com www.arkloggers.com

931-797-8029 Phone: 888-401-6367 EXT 703OR 931-797-8029

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

09 Rotobec Loader on

Morbark Chipper

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

1973 Transcraft Drop Deck Log & Equipment Trailer

F800 Boom Bucket Truck

Item ID: 39382

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

931-797-8029

Item ID: 35784

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

OR 931-797-8029

CTR Stand Alone

‘16 Halverson DelimberH140 Item ID: 7735 Skidsteer (DEMO)

Contact: SAM ItemSam@lumbermensco.com ID: JW-909632 Email: Phone: 888-401-6367 EXT 702 Contact: J Williams

‘93Bandit Barko 180B 1850 Chipper

ID: 80543 Item ID:Item 14077 Contact: Austin Contact: SAM Ph: (888) 401-6367 x703 Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Ph: (888) 401-6367 x701

Precision Chipper

25' LOG PUP 4 BUNKS TRAILER Item ID: 8062

M I S C E L L A N E O U S

Item ID: 4524

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

931-797-8029

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709

801-362-2170

94’ Mack w/ Prentice 120 Item ID: 14215

Item ID: 32415

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

OR 931-797-8029

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Chipper Ph:Morbark (888) 401-6367 x703 Item ID: 80356

Contact: AUSTIN with 1700 hours, in very good Email: Austin@lumbermensco.com condition.

Easily produces Phone: 888-401-6367 EXThigh 703

931-797-8029 quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

2015 Morbark M20R

Forestry Chipper Item ID 13644.Track Sam x702 Item ID: 12383 FIREWOOD PROCESSORS

2010 Shop Built Wood Processor Contact: AUSTIN Email: Austin@lumbermensco.com -Phone: It has a 353 Detroit diesel, 888-401-6367 EXT40703

931-797-8029 inch insert tooth circle saw, 30 foot  Issue 364 396

Item ID: 14105

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 703 ‘13 KMC 2500 EXT Track

OR 931-797-8029

Skidder

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

Viking Deloupe Trailer

'10 Woodsman 440 Whole Tree Chipper

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 ‘05 Gehl 931-797-8029 CTL 70

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID

MACK CHN613 13916. Austin x703

off onto a conveyor. This is a very

well built processor. Item ID 13820.

Int'l 4300 Bucket Truck

Sam x702 Item ID: 29129

Firewood Processor - This is Contact: SAM aEmail: Chomper Model 16 PDA Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased

Ford Truck new for F650 $32,500.Service Item ID 13865.

'99 Road Tractor ‘95Peterbilt John Deere C6 Item ID: 14188

Tree Farmer Contact: AUSTIN

Email: ItemAustin@lumbermensco.com ID: 13920 Phone: 888-401-6367 EXT 703 Contact:

ORAustin 931-797-8029

Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, 1995 RotobecFruehauf continuous

Itemoriginal ID: 69317 grapple, 5,000 hours.

(excellent Contact:condition.).

AUSTIN Item ID Email:Chris Austin@lumbermensco.com 13238. x700 Phone: 888-401-6367 EXT 703

931-797-8029 1995 Barko 775 B Feller Buncher - Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with

Handles logs up to 32”. Uses

Sam x702 Contact: AUSTIN LOGGING EQUIPMENT Email: Austin@lumbermensco.com Phone: 888-401-6367 BANDIT EXT 703

OR 931-797-8029 1999 Bandit 1900 Tracked Disc

02’ Jackson Lumber Harvester approximately 1500 hours.

Hour Item ID: 1187 meter dont work. The last 2 owners Contact: AUSTIN have only used it to load trucks or Email: Austin@lumbermensco.com Phone: 888-401-6367 EXTa703 as a backup as needed. Has CTR

OR 931-797-8029 delimber, grapple has been rebuilt.

but electronic option is available.

50% or better. 475 hp Cummins

Item ID 13694. Sam x702

Item ID: 761 Best Value Portable Log Splitter AUSTIN -Contact: Small manufacturer in PA has Email: Austin@lumbermensco.com

Phone: 703 made the888-401-6367 best valued EXT log splitter.

OR 931-797-8029

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

Kenworth Logwith Truck homemade processor a 10’

Item ID: 4849 log deck. Has a hydraulic grapple, Contact: AUSTIN chain kicker that all runs off Email:and Austin@lumbermensco.com Phone: 888-401-6367 703 of a 4 cylinder MercedesEXT power

931-797-8029 unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Item ID: 92089

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 -

3 StrandDiesel Log Deck 3412 Caterpillar engine

Item ID: 14095 with 850 HP. 5300 hrs. Mill in Contact: AUSTIN good condition.

Just finished 10 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Acre clearing job, ready to work!

OR 931-797-8029 Remote control. Big production

 List  seLL  exchange  buy  save

Boom cylinders have minor leaks.

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

Morbark 40/36 Item ID: 647

BELL

Contact: JOE T - This Bell has 1990 Bell Super Email: Joe@lumbermensco.com 888-401-6367 EXTLever 709 aPhone: brand new Duetz engine.

801-362-2170 control, 33” bar, pump and tranny ❘

 LumbermensCO.com

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August

2009 Bandit 90XP PullBehind Wood Chippers Item ID: 86220

The Tree Contact: AUSTIN Email: Austin@lumbermensco.com that Started Phone: 888-401-6367 EXT 703

931-797-8029 it All!

Boonville, New York www.starwebhosting.net/woodsmen/

Tajfun Firewood Processor 1999 International 9100 Item ID: 14249 SOUTHWEST FOREST Item ID: 33563 EXPO PRODUCTS Fri, 25 August Sat, 26 August Contact: AUSTIN Contact: AUSTIN

Email: Austin@lumbermensco.com Springs, Arkansas Email: Austin@lumbermensco.com Hot Phone: 888-401-6367 EXT 703 Phone: 888-401-6367 EXT 703 www.arkloggers.com

931-797-8029

OR 931-797-8029

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

Peterson 4300 Woods Publishing Drum Chipper

ADVERTISING SALES Item ID: 99989 Morris Woods

Contact: WALKER (888) 401-6367 ext. 704 Email: Walker@lumbermensco.com morris@lumbermens.co Phone: 888-401-6367 EXT 707

OR 931-797-3915

MARKETING DIRECTOR

Escanaba, Michigan

2015 Morbark M20R Selma, North Carolina Bandit Grinder - Chipper Forestry Track Chipper www.midatlantic-logging-biomass­

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402 The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

expo.com/

Contact: AUSTIN Contact: AUSTIN Email: Austin@lumbermensco.com WOOD EXPO Email: Austin@lumbermensco.com KENTUCKY Phone: 888-401-6367 EXT 703 Phone: 888-401-6367 EXT 703 Fri, 15 Sept Sat, 16 Sept

931-797-8029

931-797-8029

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Item ID: 72593

MID-ATLANTIC Item ID: 12383

combustion systems backed with fifty years of B. H. Payne .............................. 16 Meadows Mill, Inc. ................ 33 innovative clean-burn design. Diverse in every Saw ..................... 29 Baker ......................................

5, 7 Menominee way with multi-fuel blending capability.

Hurst utilize ..................... hundreds of common and Detector's Inc. .............. 30 Bell'sstokers Machining 27 Metal abundant solid biomass fuels.

Brute Force Mfg. ..................... 31 Midwest Sharpening.............. 26 Large or small scale, project Buck Equipment (AIM) ........

36 with Mor management is eased thebark ..................................... 9 impressively short installation time ................................... 12 Corley Mfg ..............................

32 Multitek required with prefabricated CRD Metalworks .................... 25 Piper's Saw Shop.................... 13 modular components.

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Rotary Dryers Hahn Machinery ...................... 3 The Paul Bunyan Show ......... 39 Sand Dryers Hurst Boiler ............................. 14 Thomas Industrial Controls..... 10 Grain Dryers Iron Bull ................................... 21 Union Grove Saw & Knife.. 2, 37 Lumber Kilns Cement Kilns Kilgore Saw ............................. 22 Universal Refiner ................... 23 Brick Kilns WoodMizer ................................ l

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

with 44 inch wheels, and all the bells and whistles, its a production that go up and down, with airbags, it includes two sets of Mcdonough pressure Top Casting wheel 2014guides.

Morbark M20R

ForestryonTrack Chipper is supported both sides.

This Item ID: 46375 is an extremely accurate machine

Contact: AUSTIN in ve1y good condition, Cuts 130 Email: Austin@lumbermensco.com feet a minute also has CLT presses.

Phone: 888-401-6367 EXT 703

931-797-8029 Item ID 13876. Austin x703

S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track

hours ready to run. Item ID 13434.

Clean-Burn Design

Manufacturing a full line of biomass fired Gauge ............................. 28 B&B Mfg. ...............................

18 M&F

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

Item ID: 80919 Danckaert Band Resaw - Roughly Contact: 10 hours onAUSTIN this machine since it Email: Austin@lumbermensco.com Phone: 703 has been 888-401-6367 rebuilt, it has a EXT 24foot in

931-797-8029 feed deck 20 foot out feed deck

Cat 3406 140KW Genset, 12,400 Innovative

** INFO LINK**

Lignomat ................................. 24

Ford Bucket &/ Boom Truck BANDMILLS HEADSAWS

machine, with air strain conveyers

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

LOGGING & BIOMASS EXPO

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

 24/7 SUPPORT 0 SUPPORT

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage with onboard log turners, carriage drive, hyd pac for carriage, sawyers cab, computer controls, cabinet with electronic drives for carriage knees, husk including 48" bottom saw and 36" top saw

STACKING RAC

50 YEARS

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 37

M I S C E L L A N E O U S

** CALENDAR**

A D D I R EC TO RY

Phone 315.284.4126 Fax .............................800-663-7723 Anson..................................................13.

315.849.2045 B & B Mfg..........................................14.......................... ....800-654-5320 Website www.empirehyd.com B. H. Payne........................................16......................... . ....404-761-8711 Email “Precision Under Pressure” info@empirehyd.com Bell's Machining...............................12..............................888-995-1965

Blockbuster Inc.................................15..............................888-775-4883 Buck Equipment (AIM)....................16..............................800-803-3365 Cord King...........................................3........................... 888-219-WOOD Corley Mfg.........................................4................................423-698-0284 CW Mill..............................................39..............................800-743-3491 Expo Richmond................................7........................exporichmond.com F&R Mfg.............................................14..............................800-355-1250 Great Lakes Mfg...............................14..............................877-248-5677 GoFast Manufacturing....................12..............................800-854-7439 Hurst Boiler.......................................37..............................877-774-8778 Iron Horse Auction Company........10..............................800-997-2248 Kilgore Saw Company.....................12..............................888-857-5153 Lignomat............................................12..............................800-227-2105 Lumbermens......................................16..............................888-401-6367 Menominee Saw...............................16..............................800-582-0470 Metal Detectors, Inc........................15..............................541-345-7457 Midwest Sharpening ......................17..............................231-924-5953 Multitek North America. LLC........38..............................800-243-5438 Piper’s Saw Victory Shop..............................8................................800-845-6075 13428 Ln. // PO Box 124 Adams Center, NY Prolenc Manufacturing, Inc..13606 ..........40..............................877-563-8899 Rawlings Wood Hogs......................6................................866-762-9327 Row Electric......................................17..............................800-248-4479

Smith Sawmill Service.....................2................................800-598-6344 Tajfun USA.........................................9................................800-634-5557 Universal Refiner Corporation......11..............................800-277-8068 Woodcracker North America........1................................617-401-5584 Woodlandia.......................................15, 17.......................877-508-8777

‘93 Barko 180B

‘16 Halverson H140 Item ID: 14077 MARCH 2021 PLEASE PRINT Contact: Austin Skidsteer (DEMO) If you need to Change your Address or Ph: (888) 401-6367 x703 Add Your Name to our mailing list, then Item ID: JW-909632 please complete this form and mail to: Contact: J Williams Ph: (888) 401-6367 x701 Lumbermens™ Magazine P.O. Box 1916 Columbia, TN 38402

❑ Please Add ❑ Please Change ❑ Please Remove *Company name and address required to process your change.

‘95 John Deere C6 Tree Farmer

Company Name*:_________________________________________________________ Individual Name:__________________________________________________________

Item ID: 13920

Address:_________________________________________________________________

Contact: Austin ‘13 KMC 2500 Track _______________________________________________________________________ Ph: (888) 401-6367 x703 Skidder City:____________________________________________________________________ Item ID: 14078 State:___________________________________________________________________ Contact: Austin capacity!. Item ID 13421. Sam x702 Zip:_____________________________________________________________________ Ph: (888) 401-6367 x703

BARKO

Phone:__________________________________________________________________ Email:___________________________________________________________________

off onto a conveyor. This is a very

well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is a Chomper Model 16 PDA

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 396

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

3-5

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

1994 Barko 160B - Electric

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt.

Boom cylinders have minor leaks.

Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

❘

 LumbermensCO.com

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

** INFO LINK**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses.

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 39

LUMBERMENS™ MAGAZINE 1116 West 7th Street, Suite 297 Columbia, Tennessee 38401

PRSRT STD. U.S. Postage PAID Permit No. 212 Pulaski, TN