February 2017
Since 1986 - The Original (800) 315-9950 or (615) 349-1890
Loggers • Sawmills • Pallet Manufacturers • Wood Recycling Equipment
DealS theof Month 12' Woodmizer LT-3500
HEADS ABOVE THE COMPETITION HEADS ABOVE THE COMPETITION HEADS ABOVE THE COMPETITION HEADS ABOVE THE COMPETITION
Item ID: 14049 Contact: Austin x606
Bell Ultra T on Tracks
Item ID: 14023 Contact: Sam x603
Frick #1 Jumbo Mill
Item ID: 13957 Contact: Austin
ACTIVE FRICTION CONTROL - MULTI-STEMMING ACTIVE FRICTION - PROCESSING CONTROL- HIGH - MULTI-STEMMING QUALITY TIMBER- PROCESSING - HIGH QUALITY TIMBER FRICTION CONTROL - MULTI-STEMMING - PROCESSING - HIGH QUALITY TIMBER INDUSTRY’SACTIVE MOST INDUSTRY’S RELIABLE MOST RELIABLE INDUSTRY’S MOST RELIABLE HARVESTING HARVESTING HEADS HEADS HARVESTING HEADS
Wehours, at Log the Max best are constantly Wedeveloping at Log Maxand arerefining constantly our developing and refining our A hose replacement everyA thousand hose replacement hours, theevery best thousand so you as a customerproducts can feel safe so you andasknow a customer that ourcan feel safe and know that our diameter measurement anddiameter a uniquemeasurement patent that provides and a unique products patent that provides We at Log Max are constantly developing and refining our A hose replacement every thousand hours, the best harvesting down even headsinwill thenot toughest let you down even in the toughest the best possible delimbing with the minimal best possible friction. delimbing with minimalharvesting friction. heads will not let you products so you as a customer can feel safe and know that our diameter measurement and a unique patent that provides situations. situations. These are just some of the reasons These why aremore just some and more of thepeople reasons why more and more people x606 harvesting heads will not let you down even in the toughest the best possible delimbing with minimal friction. choose Log Max, worldwide. choose Log Max, worldwide. situations. These are just some of the reasons why more and more people Call us today to find out more Call about us today to find out more about choose Log Max, worldwide. all the advantages of Log Max. all the advantages of Log Max. Call us today to find out more about all the advantages of Log Max. Log Max Inc. Log Max Inc. 1114 W 4th Plain Blvd, 1114 W 4th Plain Blvd, www.logmax.com www.logmax.com Log Max Inc. Vancouver, WA 98660 Vancouver, WA 98660 Tel: +1 360-699-7300 Tel: +1 360-699-7300 1114 W 4th Plain Blvd, www.logmax.com Vancouver, WA 98660 Tel: +1 360-699-7300
For classifieds call (800) 315-9950 or (615) 349-1890 or í With your smart phone: Scan QR Code to visit—
www.LBXonline.com
ACTIVE FRICTION CONTROL - MULTI-STEMMING - PROCESSING - HIGH QU
INDUSTRY’S MOST RELIAB HARVESTING HEADS
The Rascal H.A.W.G. Ideal to Grind: Construction Waste • Stumps • Land Clearing Green Waste • Asphalt Shingles • Palm • Pallets Difficult & Dirty Materials Simplicity Mastered Ease of Operation with Less Downtime Change Particle Size While You Grind
Universal Refiner Corporation P. O. Box 151 • Montesano, WA 98563
800-277-8068 2 n
The Original Lumberman’s Exchange
Visit us online at www.LBXonline.com!
For Classifieds Call Your LBX REP at 1-800-315-9950
February 2017 n 3
4 n
The Original Lumberman’s Exchange
Visit us online at www.LBXonline.com!
Coming Soon See pages 20 and 21 for details!
For Classifieds Call 800.315.9950 See pictures, prices, and Location of all equipment at www.LBXonline.com BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly 10 hours on this machine since it
Your #1 Source for Forest Industry Products! The Lumberman's Exchange is published monthly and circulated internationally to sawmills, loggers, pallet makers, recyclers and industrial woodworking plants. Publisher Woods Publishing Advertising Sales Morris Woods (615) 349-1890 jmwoods@q.com Design Director Donna Heninger Equipment Reps Sam Wall (800) 315-9950 ext. 603 Austin Woods (800) 315-9950 ext. 606 Mailing Address P.O. Box 1916 Columbia, TN 38402-1916 (800) 315-9950 Ad Submissions May be sent to— jmwoods@q.com Postmaster Send address changes to: Lumberman’s Exchange P.O. Box 1916 Columbia, TN 38402 The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited without written consent. ©2017 Woods Publishing
has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck
with 44 inch wheels, and all the
bells and whistles, its a production machine, with air strain conveyers
that go up and down, with airbags, it includes two sets of Mcdonough
** Calendar **
Oregon Logging Conference Coming Feb. 23–25, 2017 "Growing the Future Today" Lane County Convention Center Eugene, Oregon See page 37 for more information NorthEast Forest Products Equipment EXPO May 19–20, 2017 Bangor, Maine www.northernlogger.com SFPA Expo June 14–16, 2017 Atlanta, Georgia www.sfpa.org
** INFO LINK **
B & B Mfg................................. 18 B. H. Payne............................... 16 Baker..................................... 5, 25 Buck Equipment (AIM) ......... 36 Corley Mfg............................... 32 CRD Metalworks..................... 13 CWMill, Hogzilla.................... 15 CWMill, Armor-Hog............... 17 Dyna Products......................... 23 Empire Hydraulics.................... 8 Great Lake Mfg........................ 34 Hahn Machinery..................... 11 Kilgore Saw.............................. 22 Lignomat.................................. 24 LogMax....................................... 1 M&F Gauge.............................. 28
Meadows Mill, Inc................ 7, 9 Menominee Saw...................... 30 Midwest Sharpening.............. 26 Morbark.................................... 19 Multitek.................................... 14 Oregon Logging Conf. . ......... 37 Piper’s Saw Shop.................... 35 Rotochopper............................. 40 Row Electric............................. 12 Savage Trailers......................... 31 Select Sawmill..............................27 Thomas Industrial Controls...... 10 Union Grove Saw & Knife... 4, 33 Universal Refiner...................... 2 U.S. Blades............................ 3, 29
For Classifieds Call Your LBX REP at 1-800-315-9950
pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in
very good condition, Cuts 130 feet a
minute also has CLT presses. Item ID 13876. Austin x606
S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1
1/2” or 2” band, 22ft. track Cat 3406
140KW Genset, 12,400 hours ready to run. Item ID 13434. Sam x603
CARRIAGES & DRIVES
2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage with onboard
log turners, carriage drive, hyd pac
for carriage, sawyers cab, computer controls, cabinet with electronic drives for carriage knees, husk
including 48" bottom saw and 36" top saw (2 spare 48" blades and 1 spare 36" blade), short pop-up transfer to
February 2017 n 5
Equipment Representatives
DealS theof Month -January-
Zip
❑ Please Remove
Please Print
Call us today for all your used equipment needs!
'97 Timberjack 360C
6 n
Phone
City Address
Individual Name
✁
P.O. Box 1916 Columbia, TN 38402
*Company name and address required to process your change.
Lumbermens Magazine
Company Name*
If you need to Change your Address or Add Your Name to our mailing list, then please complete this form and mail to:
❑ Please Add
❑ Please Change
State
free equipment listings! Call – (800) 315-9950
Item ID: 14044 Contact: Sam x603
'02 Timberjack 1410B Chris Woods Phone: 800-315-9950 Ext. 600 sales@lbxonline.com
Morris Woods Phone: 800-315-9950 Ext. 602 morris@lbxonline.com
Austin Woods Phone: 800-315-9950 Ext. 606 austin@lbxonline.com
Sam Wall Phone: 800-315-9950 Ext. 603 wallsam8@aol.com
Item ID: 14045 Contact: Austin x606
12' Woodmizer LT-3500
Item ID: 14049 Contact: Austin x606
For classifieds call (800) 315-9950 or (615) 349-1890 or
í
With your smart phone: Scan QR Code to visit—
www.LBXonline.com edger, belted rollcase to clear slabs
stop and loader to deal with big logs
Trelan Chipper - This is a remote
Significant new spare parts to be
with about 840 hours except for the
onto carriage and track and frame.
negotiated separately. Item ID 13198. Sam x603
Manual Four Head Block - Manual Four Head Block Mounted on all
steel carriage. Husk. Manual Pulleys
on Bearing . Parts Book and where to order included. Item ID 12846. Sam x603
CHIPPERS
and cuts from sawline, log stop and
Precision 58 Chip Pac - Single chute
heavy duty log turner under log
x603
loader to drop logs onto carriage,
The Original Lumberman’s Exchange
loading system,. Item ID 12764. Sam
chipper that has been totally rebuilt V-12 Caterpillar power unit. New clutches, disc, bearing, liners and
custom chute. 23” in opening and
V-12 Cat with 750-800 hp rating. Item ID 13866. Sam x603
COMPLETE SAWMILLS
2006 Woodmizer LT300 - This mill is currently running, and includes the sawmill, and cab. An incline
conveyers, a transfer table and two
sets of roller tables. This mill saws a
million board feet or more of walnut
Visit us online at www.LBXonline.com!
RELIABLE
QUALITY
MINER EDGER
OPTIMIZE PRODUCTION MAXIMIZE PROFITS INCREASE YIELD REDUCE LABOR
CALL FOR A FREE QUOTE
1-800-626-2282
M EADOWSM ILLS.COM sales@meadowsmills.com
A CUT ABOVE THE REST, SINCE 1902
‘01 Cat D5M Dozer
Timberjack 230
Item ID: 13958 Contact: Austin Ph: 800-315-9950 x606
Item ID: 13785 Contact: Sam Ph: 800-315-9950 x603
every year. Max log diameter 36in,
strand roof top chain, New gearbox
Max Width of cut 25in, The width of
Sanborn Scragg Mill Item ID: 14050 Contact: Austin Woods 800.315.9950 Ext. 606
‘06 Case 440 Skid Loader
Item ID: 13886 Contact: Austin Ph: 800-315-9950 x606
drive. Item ID 13199. Sam x603
hours on this machine, everything
operating is available, and can be sent
Morbark C-16 Debarkers - 75 HP
videos available of it running, and
with 1700 hours, in very good
x606
Item ID 13193. Sam x603
13888. Austin x606
quality chips with patented ‘Cone’
the band is 1 1/2 Inches. Video of it
upon request. Item ID 13892. Austin Forest-All Sawmill, circle saw. Item
DEBARKERS
Motor, 24’ Outfeed Hourglass Rolls.
DRY KILNS
ID 12762. Sam x603
MEC 12 x 38 triple pass Drum Dryer
Mellott 3 Strand Lumber) Conveyors
fan and cyclone. Item ID 13925.
CONVEYORS
Decks (Log - (2) Mellott log decks, 3 strand, (1)22’ 6” long, 51 3/4” high
(1)27’ long, 74” high $7500 ea. Item ID 13200. Sam x603
Hill Top 4 Strand Lumber)
Conveyors Decks (Log - Hill Top lumber transfer deck, 37’ long, 4
- Comes with trunnions, drum drive, Austin x606
MEC 12 x 42 triple pass Drum Dryer
- 12 x 42 Mec triple pass Drum Dryer,
comes with trunnions. Item ID 13924. Austin x606
DYNAMIC CHIPPERS
2004 JCB 441 Wheel Loader - 3,509
works as it should. I have many
can be sent upon request. Item ID
2007 Dynamic 565 Chipper - Very nice and good working chipper.
1350 hours. S/N 5032. Cummins
360HP engine. Auto-Feed system
condition. Easily produces high
drum design. Can easily load 42’
vans and produce 6 - 8 loads per day. Item ID 13882. Austin x606
EDGERS & GANGS
with remote control. Pintle hook for
Brewco Saws - Two Brewco Saws in
biomass from limbs and tops, but can
ID 13644. Sam x603
towing. Great machine for producing take up to 20” trees. Item ID 13437.
excellent condition. Runs great. Item
FIREWOOD PROCESSORS
Sam x603
2010 Shop Built Wood Processor - It
a 2008 dynamic cone head chipper
insert tooth circle saw, 30 foot chain
2008 Dynamic 585 Chipper - This is
For Classifieds Call Your LBX REP at 1-800-315-9950
has a 353 Detroit diesel, 40 inch
February 2017 n 7
“Precision Under Pressure”
Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com
Bell Ultra T on Tracks ‘95 Timberjack 450C
Item ID: 13980 Contact: Sam Ph: 800-315-9950 x603 1999 Bandit 1900 Tracked Disc
Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins
Diesel. 7500 Hours. One owner. Well
maintained. Item ID 13294. Sam x603 2004 Bandit Beast Model 4680 - 3412
13428 Victory Ln. // PO Box 124 Adams Center, NY 13606
Caterpillar Diesel engine with 850
HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job,
ready to work! Remote control. Big
production capacity!. Item ID 13421. Sam x603
‘04 Komatsu WA500-3LK Item ID: 14048 Contact: Austin Ph: 800.315.9950 x606
2009 John Deere 648H One owner machine. Item ID: 13747 Contact: Austin Ph: 800-315-9950 x606
conveyer, 8 way splitter, on 20,000lb
cylinder Mercedes power unit. Has
Austin x606
conveyor. This is a very well built
goose neck trailer. Item ID 13916. Best Value Portable Log Splitter -
Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda
motor. Manual start but electronic
option is available. Has Log Lift. Uses
4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x603
Firewood Processor - This is a
homemade processor with a 10’ log
deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4
8 n
a 4’ chain saw that kicks off onto a
processor. Item ID 13820. Sam x603 Firewood Processor - This is a
Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure,
water temp and amp gauges. Cuts logs up to 16”. One owner and
comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865. Sam x603
LOGGING EQUIPMENT BANDIT
The Original Lumberman’s Exchange
BARKO
1994 Barko 160B - Electric
knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000
original hours. (excellent condition.). Item ID 13238. Chris x600
1995 Barko 775 B Feller Buncher -
Pumps recently redone. 400 hrs on
injection pump. always started good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x603
1999 Barko 160D - new engine with approximately 1500 hours. Hour
meter dont work. The last 2 owners have only used it to load trucks or
as a backup as needed. Has a CTR
delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x603
94 Barko 275 - Excellent value with
low at hours at 3,500. 5.9 CUMMINS continuous grapple. Runs Great!. Item ID 13740. Sam x603
BELL
Item ID: 14023 Contact: Sam Ph: 800-315-9950 x603 1990 Bell Super T - This Bell has a brand new Duetz engine. Lever
control, 33” bar, pump and tranny
has been rebuilt not long ago. Hour meter is inop. New paint. Runs
perfect. Has heat and air, it just needs to be fixed. Item ID 13896. Sam x603 1993 Bell Super T - Good running
condition. 33” Bar Saw. Tires at 50%. Deutz engine. Hour meter broken. Item ID 13543. Sam x603
1994 Bell T120 Tracked Feller Buncher - Very Good Condition. Hour meter reads 8900 hours. Undercarriage at
60%. 33” Bar Saw Felling Head. Heat and AC work well. C series design with Cummins 4 cylinder engine. Very well maintained. HARD TO
FIND MACHINE!. Item ID 13530. Sam x603
1996 Bell GH-120 Track cutter with swing boom head - This is a one of
a kind cutter. 3/4 pitch chain can be
switched to .404 pitch easily. Comes with piles of parts, chains and bars. New 4bt cummins engine, glass,
seat, undercarriage except for chain. Drive motors have been resealed.
18” tracks, and 33” sawbar. Item ID 13802. Sam x603
1996 Bell Ultra T Feller Buncher -
Totally Rebuilt by Dealer. Cleanest and best conditioned Bell you will find on the market. 9800 actual hours on frame. Rebuilt Deutz
engine. Rebuilt transmission. Rebuilt Pump. Rebuilt wheel motors.
Documentation on all updates. 28L
x 26 tires at 30% with chains at 80%. Joystick controls. Heat & AC work
well. 33” bar saw felling head. Item
Visit us online at www.LBXonline.com!
John Deere 548D Item ID: 14024 Contact: Sam Ph: 800-315-9950 x603
Danckaert Band Resaw
Cuts 130 feet per minute! Item ID: 13876 Contact: Austin Ph: 800-315-9950 x606
A CUT ABOVE THE REST SINCE 1902
CAT D4H TSK
Item ID: 13558 Contact: Sam Ph: 800-315-9950 x603 ID 13525. Sam x603
1996 Ultra T Bell - Brand new Duetz engine with 0 hours, heat and a/c.
Joystick, dangle head with 30” bar. Needs 28L X 26 tires, but almost
KMC Track Skidder Model 6BTA Item ID: 13738 Contact: Austin 800.315.9950 Ext. 606
new chains. Only 2000 hours on
99’ Case 850G Long Track Dozer
13752. Sam x603
original hours, has never been used
hydrastats. Good machine. Item ID Bell Tree Cutter - Around 1000 hours on the machine. New air cooled
motor only about 300 hours. Rebuilt dangling head. Several bars and
chains. Machine came off the job in
February and is field ready. Item ID
- One owner machine, only 3300
in the woods, it has a ripper on the back, original pads, and chains,
Under carriage is new along with
new rollers on the bottom, and new
sprockets. Item ID 13909. Austin x606
CATERPILLAR
13943. Austin x606
1974 CAT 992 Log Loader - Runs
Recent motor. turbo deutz. Item ID
one pass. No hour meter. Priced to
Bell ultra T - Very well Maintained. 13546. Sam x603
Bell Ultra T - 1997 bell ultra t. Deutz air cooled Diesel engine with 3300
original hours. Excellent condition, working everyday. Tires 60% fixed
ring chains 75%. Several extra bars
and chains, parts etc. Item ID 13770. Sam x603
CASE
2006 Case 440 Skid loader - With only 871 hours, this machine starts, runs, and operates like new. I have many videos available and can be sent
upon request. Item ID 13886. Austin x606
30” OR 36” BAY WIDTHS EDGE UP TO 4” THICK HANDSET OR HYDRAULIC FULLY CUSTOMIZABLE
good. Can unload full truck load in move. Item ID 13463. Sam x603
1979 Cat D5B w/Hyster Winch - 1979 Cat D5B s/n 22x380, direct drive,
EROPS, S-Dozer w/ tilt. Needs new
rails and sprockets. Enclosed cab. Has A/C but not working. Hyster Winch may need some work. Tractor itself
runs good and pushes well. Owner retired. Item ID 13364. Sam x603
1981 Cat D7G w/Rippers - Only 6500 hours on this limited used machine. Owner reports that it has new
alternator and has been gone through
CALL FOR A FREE QUOTE
1-800-626-2282
M EADOWSM ILLS.COM sales@meadowsmills.com
completely. No leaks. Can pull the
twin rippers through ANYTHING!
For Classifieds Call Your LBX REP at 1-800-315-9950
February 2017 n 9
Reduced Price
‘04 648GIII JD Duel Arch Skidder Item ID: 13932 Contact: Sam Ph: 800-315-9950 x603
Fast Cut II Trimsaw
Item ID: 13901 Contact: Austin Ph: 800-315-9950 x606 condition (about 60%). 1100 hours
on Undercarriage. Has 3000 hours
on rebuilt engine. Has OROPS. FOB Utah. Excellent machine for steep
slope logging. Item ID 13298. Sam x603
1992 Cat it28B - with Forks and
Baker Triple Head Resaw ‘01 JD 640G III Item ID: 14019 Contact: Austin Ph: 800-315-9950 x606 Real powerful machine without all the electronic gizmos of new units. Item ID 13222. Sam x603
1982 Caterpillar 920 - This front end loader comes with a bucket and log
forks. It has 7000 actual hours with a
3304 engine. 23.1 X 26 skidder tires, 2 new and 2 at 45%. New paint 1 year
ago. Brakes are weak. Item ID 13751. Sam x603
1987 CAT Model D4H Dozer - Unit
10 n
Item ID: 13985 Contact: Austin Ph: 800-315-9950 x606 has 18" shoes. Shoes and links are in poor condition, sprockets are new.
Has a 8'7" six-way blade. New cutting edges and end bits, has a Cat model 54PS winch set at standard speed with four-way fairleads. Engine
starts great, no blow by, no smoke, equalizer bar is in good condition, wipers work, horn works, two
lights work, steers easy, hits all gears normally. Item ID 13544. Sam x603
1988 Cat D5 TSK w/Grapple - dozer with fixed grapple. No Winch. Runs great and undercarriage in good
The Original Lumberman’s Exchange
Bucket which is in excellent
condition!. Item ID 13811. Sam x603 1994 Caterpillar 320 - Dry machine
that is in good condition for the year. The stick and bucket cylinder have been repacked. It has a thumb and
bucket on it, also has a 230 Waratah
processing head that can be sold with it. Hours are around 19k, motor has been replaced a couple years back. Machine is working daily. Item ID 13936. Austin x606
1994 Caterpillar D4 Hi track with
grapple - This is an extremely low
hour dozer/skidder with only 2800 actual hours. Comes with new 30”
pads and chain. Undercarriage is still in excellent shape. Fixed grapple and no winch. Item ID 13932. Sam x603
1996 Cat 214 Mobile Excavator with
36’ magnet 3 tons steel shear. low hrs!
John Deere 548D
Item ID: 14024 Contact: Sam Ph: 800-315-9950 x603
‘06 John Deere 748G III
Item ID: 13881 Contact: Austin Ph: 800-315-9950 x606
All hard tires, 4 outriggers ideal for
scrap business. It also has 48’ swavel bucket for street ditch clean up. Item ID 13441. Sam x603
1996 Caterpillar D4H - Hi-track dozer with forestry package, 6 way blade, 4500 hours and has a new engine. Item ID 13697. Sam x603
1998 Caterpillar 515 - Grapple with winch, no heat or air. Open cab
skidder with 9800 hours. Tires are
28L’s, rear 90% and fronts are 30%
with new bear paws chains. Item ID 13801. Sam x603
1999 Cat 525B Grapple Skidder -
Heat and a/c, New Motor with 3000 hours, New Bushings, New Grapple
Cylinder, New Turbo, Tires are 28L x 26, fronts are at 40% and rears are at 80%. Item ID 12618. Sam x603
2001 Caterpillar 525 Skidder - New center section and turn cylinders,
boom cylinders, and a/c compressor and dryer. has 535 axles and dualing rings. 3 tires at 50% and 1 at 20%. Replaced front engine seal and
engine was rebuilt according to
previous owner. Both valve banks
rebuilt. Has winch. Item ID 13665.
Visit us online at www.LBXonline.com!
Introducing the HFP150 Compact Firewood Processor
Hahn HFP150 Firewood Pro
Hahn Machinery Inc, P.O. Box 220 • Two Harbors, MN 55616 www.hahnmachinery.com
HGP150 Firewood Processor
T
he HFP150 is the latest addition to the Hahn line of firewood processing attachments for skid steer loaders and compact track and wheel loaders. When attached to a properly equipped loader, the HFP150 Compact Firewood Pro can pick up a 6' to 10' log, cut it into firewood blocks, and split those blocks into 2, 4, or 6 pieces. All functions are performed by one person seated in the loader's cab—resulting in greater safety, improved productivity, and making cutting and splitting firewood a whole lot easier. The HFP150 Compact Firewood Pro is: • An affordable alternative for the person looking for a faster, easier, more efficient, and safer method of putting up firewood—but doesn't require the production capacity you get with the larger Hahn HFP160 commercial unit. • A smaller, lighter, simpler machine that runs well on most mid-sized skid loaders in the 45hp to 50hp range—with hydraulic flows of 15 gallons per minute.
A unique "Shuttle Trough" system carries the log up to the splitting wedge
The high speed chainsaw cuts a firewood block 12" to 20" long
For more information on the— HFP150 Firewood Pro
1-800-483-8825 for complete details on this or any Hahn firewood processor or forestry equipment call or email info@hahnmachinery.com For Classifieds Call Your LBX REP at 1-800-315-9950
As the splitting cylinder pushes the block through the wedge, the Shuttle trough is advancing the log for another cut
February 2017 n 11
ROW ELECTRICAL EQUIPMENT, INC. YOUR SOURCE FOR USED, RECONDITIONED:
• Squirrel Cage Motors • Gear Motors • Wound-Rotor Motors • Synchronous Motors • DC Motors
Fax to:
• DC Motors - Crane and Mill • Adjustable Speed Drives • Generators - AC and DC • Engine-Generator Sets • Transformers, Single Phase
P.O. Box 2812 • Toledo, Ohio 43606
• Transformers, Three-Phase • Across/Line Magnetic Starters • Reduced Voltage Starters • Safety Switches • Phase Convertors
800-248-4479
www.rowelectrical.com 419-248-4479 rowelec@glasscity.net WE ANSWER THE PHONE 24 HOURS • WE BUY USED Electrical
419-244-8887
‘97 Timberjack 360C
Item ID: 14044 Contact: Sam Ph: 800-315-9950 x603 Sam x603
2002 Caterpillar 535B - Dual arch
with winch, 30.5 X 32 tires at 50%. 14000 total hours with 2000 hours
on new engine. Cradle is good and
center section is brand new. Excellent
skidder for the money. Item ID 13702. Sam x603
2004 Caterpillar 953C front end
loader - This is a one owner machine that has been run by the owners
wife 90% of its life using a root rake pushing brush. It’s been very well maintained. New undercarriage
with single grousers at 90%. D6 class
undercarriage. A/C has been redone. 11000 hours, Cat quick coupler.
Comes with a bucket and root rake. Item ID 13854. Sam x603
2005 Caterpillar 525B - Rebuilt
engine with 2500 hours, and rebuilt
transmission with 2000 hours. Good
30.5 Primex tires. Has the high single
12 n
Bell Ultra T on Tracks Item ID: 14023 Contact: Sam Ph: 800.315.9950 x603
Clark Ranger 665D Item ID: 13748 Contact: Austin Woods 800.315.9950 Ext. 606
arch. Everything works as it should.
great shape, don’t miss out on this
x603
2006 Caterpillar 525B Skidder - Single
Tight and dry. Item ID 13750. Sam
2005 Caterpillar 525B - This is a dual arch skidder with winch. Very low
hour skidder with 7900 frame hours and only 63 hours on a new engine.
Continuous grapple, tires are 30.5’s @ 70%. This is a really nice skidder for the price. Item ID 13816. Sam x603 2006 Cat HS-201 Hot Saw Head -
Super Clean High Speed Saw Head. Only 1400 hours before owner
removed from carrier. Everything running great. Has 40 degree tilt.
New units sell for $100K! Great Buy!. Item ID 13517. Sam x603
2006 Caterpillar 517 - This is a low
hour dozer with swing boom grapple and only 7800 original hours. This is a one owner machine with new extreme duty single grouser pads
and rails. Sprockets and rollers are
still in good shape. This dozer is in
The Original Lumberman’s Exchange
one. Item ID 13869. Sam x603
arch with high rise arch and winch. Tires are 30.5’s @ 80%. Comes with
2 year, 3000 hour warranty from Cat
due to complete Cat reman. 8000 total hours on machine with about 2000
since reman. Item ID 13815. Sam x603 2007 Cat 525c Grapple - Great
condition!. Item ID 13384. Sam x603 2007 Caterpillar D6N LGP Dozer
Enclosed Cab - Overall: Cab Heat & AC, 150HP Cat C6.6L, 90%
Undercarriage, GPS Ready, Sweeps & Rear Screen, 13’6” PAT Blade, 39,500 LBS, Hours: 7,867 Horsepower: 150
S/N: ALY03028. Item ID 13567. Chris x600
2010 Caterpillar 525C - Dual arch with winch. New injectors and
hydraulic pump. Tires are 30.5’s at 75%. Clean, dry and tight skidder
with only 9500 hours. Its been used
John Deere 440C Item ID: 13887 Contact: Austin Ph: 800-315-9950 x606 its whole life dragging wood for a chipper. Item ID 13804. Sam x603
2012 Caterpillar 559B - Only 4000
hours on this like new loader. It has only worked in pine until recently. Item ID 13695. Sam x603
2013 Cat 525 C Grapple Skidder - Super Clean Cat 525 with only
2700 hours and a 5000 hour Power
Train warranty. 30.5 tires are new in back and 60% in front. Save $50,000 off new machine and still have
warranty!. Item ID 13349. Sam x603
2013 Caterpillar 535C - This is a dual arch with winch skidder that only
has 4774 hours and is mounted on
35.5 X 32 tires at 95% and 1 at 55%.
This is a great deal on a low hour C
model Cat. This is an extremely clean, mechanically perfect one operator skidder. Item ID 13868. Sam x603
2014 Caterpillar 535C - This is still a like new skidder with 30.5 tires at 50% front and 80% rear. Dual
arch with winch. Low hours on this
Visit us online at www.LBXonline.com!
There's Only One Way to Make Money in the Firewood Business…Production!
There’s Only One Way to Make Money in the Our Vision for Your Success is 20/20 Firewood Business…. Production! The Results are in YOur from the Great Firewood Shootout… Our VisiOn FOr success is 20/20
Our Rapido Loco and shootout... Woodbine Pro 20 The results Are in From the Great 20 Firewood Our rapidoDominated Loco 20 and Woodbine Pro 20Competition! DOMinATeD The cOMPeTiTiOn! the de A Ma e US th in
Woodbine Rapido Loco 20 Features Woodbine Rapido Loco 20 - 50” Simonds Circular Slasher Blade Features: - 73 HP Deutz Diesel • 50" Simonds Slasher - Tandem Axle DOTCircular Approved TrailerBlade • 73 HP Deutz Diesel - 24’ Conveyor STANDARD • Tandem Axle DOT Approved Trailer - 13’ Powered Infeed STANDARD • 30' Conveyor Standard - 8• Way Splitting Wedge 13' Powered Infeed Standard - 20” Log Diameter • 8-way SplittingCapacity Wedge - Push-Button Splitting System • 20" Log Diameter Capacity • Push-button Splitting System
At $54,900 Ready To Produce, At this is$58,900 the Fastest Ready to Produce, this is Production Firewood The FastestinProduction Processor North Firewood Processor in America.* North America.*
Woodbine Pro 20 Woodbine Pro 20 Features
- Oregon .404 Harvester components Features: - Tandem Axle DOT Approved Trailer • Oregon .404 Harvester Components - UpgRADeD 60 HP Deutz Diesel for more power! • Tandem Axle DOT Approved Trailer - 24’ Conveyor STANDARD • Upgraded 60 HP Deutz Diesel for More Power! At $44,900 the - 13’ Powered Infeed STANDARD • 24' Conveyor Standard Woodbind Pro 20 leads 13' Powered Infeed Standard - 8• Way Splitting Wedge At $44,900 its class in PRICE, • 8-Way SplittingCapacity Wedge - 20” Log Diameter the Woodbine Pro 20 PRODUCTIVITY and • 20" Log Diameter Capacity leads its class in Price, - Push-Button Splitting System PROFITABILITY* • Push-button System Productivity and - Our Most PopularSplitting Chain Saw Machine • Our Most Popular Chain Saw Machine Profitability*
remember HindsigHt is 20/20
Remember: Hindsight is 20/20
sO BeFOre YOu BuY cOMPAre eiTher OF The Soseries Before You Buy, compare either of the 20 PrOcessOrs FrOM crD MeTALWOrks TO AnYProcessors BrAnD - AnY siZe - AnYWhere. 20 Series from CRD Metalworks to Any Brand, Any Size, Anywhere check them out at the
*As Seen In Sawmill & Woodlot Magazine
Family Owned – Family Operated – Factory Direct
Family Owned—Family Operated—Factory Direct
Call 888-667-8580
Sawmill & Woodlot www.crdmetalworks.com
For Classifieds Call Your LBX REP at 1-800-315-9950
*As seen in
magazine.
February 2017 n 13
P.O. Box 170 • Prentice WI 54556-0170 • 800-243-5438
www.multitekinc.com • sales@multitekinc.com
Multitek Firewood Processors Increase Your Productivity and Profitability • Quality Equipment to Reduce your Labor Costs • Circular Saw or Bar & Chain Models • 7 Models to Choose From • Production Ratings up to 5.5 Full Cords Per Hour
Made in the U.S.A.
Great Dane 50’ Closed Top Chip Van John Deere 440A 2700 hrs. on new winch and motor Item ID: 13937 Contact: Austin Ph: 800-315-9950 x606
skidder at only 3700. These skidders
are hard to come by and better made than the new D models. Get this
while you can. Item ID 13840. Sam x603
1994 Cat D4H TSK. Undercarriage
60% 24” pads.Its got the 3304 engine. Item ID 13558. Sam x603
2002 Cat D4H TSK - Excellent
14 n
2006 CAT 517
Item ID: 13869 Contact: Sam Ph: 800-315-9950 x603 running condition. No issues
concerning anything mechanical.
3622 hours. Undercarriage is 80%
Item ID: 14002 Contact: Austin Ph: 800.315.9950 x606 Owner Runs great! Is it an excellent
condition. Rubber is around 75% Has new Hydraulic pump and Charge pump. Item ID 13616. Sam x603
CHAMBERS
w/ 24” pads. Machine is in excellent
2010 Chambers Deliminator - This
Cat D5B Dozer - Cat D5B s/n 22X380,
automatic idle down. New chains,
condition. Item ID 13554. Sam x603 direct drive, EROPS, S-Dozer w/ tilt.; Limb risers; Hyster Winch,
serviceable u/c. Item ID 13113. Sam x603
2000 Cat 515 Grapple skidder - One
The Original Lumberman’s Exchange
deliminator has 8000 hours with
good tires, brakes and lights. Just
come hook up to it and go to your
job site and put it to work to up your production. Item ID 13858. Sam x603
CLARK
‘90 Bell Super T Item ID: 13896 Contact: Sam Ph: 800-315-9950 x603
Clark Ranger 665D - Tight and dry
machine, rebuilt motor. hour meter broken, It has a 353 Detroit, with
grapple, and winch, always fires right up, and runs with no issues. Item ID 13748. Austin x606
early 70’s Clark 664 cable skidder -
some center slack, needs front tires,
comes with a spare tire. Gearmatic 19 winch doesn’t hold good. 453 Detroit power unit. Item ID 13629. Sam x603
JOHN DEERE
‘92 John Deere 590 D Cutter - Will
need pads in the future, sprockets
Visit us online at www.LBXonline.com!
®
‘94 CAT D4 Hitrack w/Grapple
Shop Built Wood Processor
Item ID: 13932 Contact: Sam Ph: 800-315-9950 x603
Produces 8-9 cords/hr. Item ID: 14038 Contact: Austin Ph: 800-315-9950 x606
‘00 Tigercat 845B
Corley Complete Sawmill
Item ID: 13939 Contact: Sam Ph: 800-315-9950 x603
Item ID: 14035 Contact: Austin Ph: 800.315.9950 x606
and rails are about 85%, it has a 4cyl
1989 JOHN DEERE 648D - 30.5 tires
w/ a bar saw and a spare idler. Item
for parts that will go with it. Machine
JD motor. It has a Rotnee dangle hd. ID 13612. Chris x600
1982 John Deere 540B - This is a
grapple skidder, 18.4 X 34 tires, 3 at
60% and 1 brand new. Uses about a
gallon of hydraulic oil a week. Good machine. Item ID 13759. Sam x603
1984 John Deere 540B - This is a cable skidder with new paint, muffler and seat. Comes mounted on new 18.4 X 34 front tires and 1 almost new rear tire and 1 rear at 20% with chains
on all 4. Owner bought this skidder in 1992 and put the front tire chains on in 1994 that are still there and in almost new condition. Used very
little and in excellent condition. New owner will not be disappointed in this skidder. Ready to go to work
today and drag wood. Item ID 13931. Sam x603
1988 John Deere 440D Skidder -
Only 7400 hours on this hard to find
skidder. Comes with 18.4 tires @ 60% with tire chains. 100’ of new cable
with 5 sliders. Item ID 13781. Sam x603
E
around 40%. We have another 648 D runs, but needs a little TLC. Item ID 13220. Sam x603
1989 John Deere 650G - This is a low
dozer with only 5500 original hours. Undercarriage is 85%. Winch with an arch and winch works good.
Lever steer, 6 way blade. Comes with $4000 worth of parts to fix blade bushings. Good frame rails and
C-frame, they’ve never been cracked or welded. This dozer is in excellent shape and ready to go to work
building roads and dragging loads. Item ID 13863. Sam x603
1990 John Deere 640D Skidder - This is a grapple skidder with winch.
Comes with 30.5 tires at 40%. Item ID 13814. Sam x603
1994 JD 648E Grapple Skidder - Good running 1994 JD 648E. Single Arch
Grapple. Winch. 28L x 26 tires: One new, One at 80%, Two at 505. John
Deere engine rebuilt 800 hours ago.
Starts every time! Pins tight. Working today. New Hydraulic Pump. New Manifold. 12,000 hours. Item ID
For Classifieds Call Your LBX REP at 1-800-315-9950
February 2017 n 15
When You Buy Your Circular Saws From B.H. Payne You’ve Bought the best... We Guarantee It! Traditional Quality Combined With Todays Technology Quality Brand Reg. U.S. Pat Off
Circular Saws Saw Bits and Shanks Circular Knives Carbide Tipped Saws Carbide Strobe ® Saws B.H. Payne & Company Saw Manufacturers
Call 800 752-0627
Make Sure To Ask For Our Free, Complete Saw Catalog We Manufacture & Sell Inserted Tooth Headsaws, Solid Tooth Saws, Inserted Tooth Cutoff Saws & Carbide Saws. We also Stock & Sell Bits & Shanks, Carbide Tips, Diamond Wheels, Knife Grinding Wheels, Saw Gumming Wheels & Knives.
Here’s What You Get With Every B.H. Payne Saw • Saws manufactured from only the Highest Quality Nickel Alloy Steel. • Each Saw Milled with State-Of-The-Art Precision CNC Milling Machine. • We Tension Your Saw to Your RPM Speed BEFORE Leaving Our Factory. • Your Satisfaction - Completely Guaranteed.
‘05 Timberjack 608B
Item ID: 13898 Contact: Sam Ph: 800-315-9950 x603
84/85 John Deere 440B/C
Item ID: 13908 Contact: Sam Ph: 800-315-9950 x603
B.H. Payne & Company, Inc. P.O. Box 90608 East Point, GA 30364 404 761-8711 Fax 404 761-5398
PSB Post Peeler
“Since 1890” E-mail: info@paynesaws.com
Web Site: www.paynesaws.com
‘80 John Deere 550 Comes w/Winch! Item ID: 14037 Contact: Austin Ph: 800.315.9950 x606 maintained by single owner. Tracks
for bogies. Item ID 13538. Sam x603 2003 John Deere 640GIII - This is
a hard to find cable skidder with
only 3000 hours on the engine. Both rear ends have been rebuilt. Center
‘89 Timberjack 380A Item ID: 14039 Contact: Austin Ph: 800-315-9950 x606
Side Winder Pallet Wrapper
Item ID: 14032 Contact: Austin Ph: 800-315-9950 x606 13103. Sam x603
1994 John Deere 640E - Enclosed cab with heat and a/c. Cable machine
with 24.5 X 32 comes with ring chains and ice chains. 14665 Hours. Item ID 13757. Sam x603
1995 John Deere C6 Tree Farmer - Only 20 hours on a new 5.9
16 n
Cummins engine. The whole center
has been fixed, and line bolt redone, transmission is tight, center pins are
good. It has a full speed tranny, with two reverse, with a winch. Working daily. Item ID 13920. Austin x606
2002 JD 648GIII Dua Arch Grapple Skidder - No Winch. 11,400 hours.
New 30.5 x 32 tires. Good running
skidder. Very well maintained. Item ID 13500. Sam x603
2003 JD 1710D Forwarder - 2003
JD 1710D Forwarder; 17,000 hours; Good running condition. Well
The Original Lumberman’s Exchange
section is good with just a little slack. 28L tires. Item ID 13782. Sam x603
2003 John Deere 748GIII - Dual arch with winch. This has 4 new 30.5’s at 95% and comes with 2 sets of
chains. This is the original paint and the skidder only has 8600 original
hours. Also has dualling rings for wet weather. Item ID 13851. Sam x603
2004 648GIII John Deere duel arch
skidder. - Slick Machine. Runs good
motor is in top notch condition. Item ID 13610. Sam x603
2004 John Deere 648GIII - This
machine has 13000 total hours on
the body, with only 3000 hours on
the new motor, comes with a set of
chains, working daily. Item ID 13878. Austin x606
Item ID: 13926 Contact: Sam Ph: 800.315.9950 x603 2004 John Deere 853G - This track
cutter is in excellent condition with new 30” pads, pump, batteries and disc. Undercarriage at 75%. 9400 hours. Item ID 13796. Sam x603
2005 John Deere 903G Feller Buncher - GN Roy 22’’ continuous saw head.
Heated & A/C cab. Standard boom.
Medium pads. Operator, service, and parts books included. Item ID 13203. Sam x603
2006 JD 2554 Processor with 624
Waratah ‘Super’ Processing Head. 10500 hours. New pumps. New
engine. New drive motors on head.
Almost new rails. New front window. Super tight machine. Runs great. One owner!. Item ID 13550. Sam x603
2006 JD 2554 Processor with Waratah 624 Super - New Computer for head (Logrite). 10500 hours. New main pump and auxiliary pump. New
rebuilt engine with only 300 hours.
New drive motors on head for 18'/
sec. Almost brand new rails on 90%
UC. New front window. Super tight machine. Item ID 13595. Sam x603 2006 John Deere 700J Dozer - This
work horse comes with a winch, and
Visit us online at www.LBXonline.com!
®
‘78 Clark 668 Item ID: 14046 Contact: Austin Ph: 800.315.9950 x606
2000 Timberjack 1110
e m e r t Ex Duty
Item ID: 14033 Contact: Austin Ph: 800-315-9950 x606
2011 MC266T Rotochopper
Item ID: 13837 Contact: Sam Ph: 800-315-9950 x603 new undercarriage, it is tight and dry & running daily with 4500 hours. Item ID 13883. Austin x606
2006 John Deere 748GIII - 8700 hours,
‘11 Tigercat 620D Item ID: 13929 Contact: Sam Ph: 800.315.9950 x603
running daily. Item ID 13881. Austin
machine. This machine is in excellent
2006 John Deere 748GIII - This
2007 John Deere 648GIII - Dual arch
x606
skidder comes equipped with a fire suppression system. Hour meter
reads 11000 hours, but is inop now,
but had a new engine at 5000 hours.
Tires are 30.5 X 32 at 20% and chains on all 4 that are still in good shape.
All pins are tight, very little slack in
the cradle. Item ID 13930. Sam x603
2006 John Deere Firewood Processor - This is a Chomper super 14, with a
60hp engine. In very nice shape. Only 171 hours, comes with green chain
conveyer. All of the manuals for the engine, and the chopper itself come
with it, as well as all of the electrical schematics. Item ID 13894. Austin x606
2007 John Deere 160 - Track excavator with a waratah processor. Owner
retired. Located in Montana. Item ID 13789. Sam x603
2007 John Deere 2554 with 624
Waratah processor - New sprockets,
rollers, and chain. 10900 hours on this
condition. Item ID 13760. Sam x603
with winch and dualing rings. Tires
are 30.5’s at 50%. Straight sheet metal, glass is good, and interior is in good shape. This unit has been very well taken care of. 13,500 hours. Item ID 13710. Sam x603
2008 JD 648H w/Swing Boom
Grapple - Very clean and unique machine. 6800 hours and well
maintained by one owner. Young
Swing Boom grapple gives you extra reach and capability. 30.5 x 32 tires at 70%. A/C and Heat run great. Pins
tight. Hydraulics dry. Engine strong. Item ID 13357. Sam x603
2008 John Deere 344J - Only 900
Hours!! Great running condition,
z-bar, 3rd valve, ride control, intake heater for cold weather starting,
heat/ac, stereo. Item ID 13034. Sam x603
2008 John Deere CT332 - This skid steer has only 2200 hours and still
looks nearly new. New Starter, fresh
For Classifieds Call Your LBX REP at 1-800-315-9950
February 2017 n 17
Financing Available
Shrink Wrap Firewood/Wastewood
Sell Your WOOD – $300/cord or More! Double or triple your profits by shrink wrapping wastewood - forewood with WOOD-PAKer! Attractive various size packages can be obtained with our high production, easily operated and affordable machines. Eight machines available. The ideal equipment for producing square bundles-palletizable for ease in storage and transporting. Inquire for free details. Video and Package samples at nominal fee.
‘05 Woodmizer LT300
Item ID: 14031 Contact: Austin Ph: 800.315.9950 x606
B & B Manufacturing • 3007 West River Road • Olean, NY 14760
Toll Free 1-800-654-5320 E-mail: bbmfg@sprynet.com • Web: http://home.sprynet.com/~bbmfg/
2013 Caterpillar 535C Item ID: 13868 Contact: Sam Ph: 800-315-9950 x603 x603
John Deere 548G2
Item ID: 14042 Contact: Austin Ph: 800-315-9950 x606 oil change, 90hp engine. Has quich attach and comes with magnum mulcher, bucket and high flow
hydraulic pump for the mulcher.
This is a great buy for the hours and
attachments. Item ID 13855. Sam x603 2009 John Deere 437C - Loader
with delimber. 13000 hours with
udpated turntable, needs glass. Using everyday, just downsizing. Item ID 13787. Sam x603
2010 JD 648H Skidder - 6500 hours.
Comes with 30.5 Tires - Two NEW in front and Two at 40% in Rear + One
18 n
‘97 Timberjack 240D
Item ID: 13917 Contact: Sam Ph: 800-315-9950 x603 spare at 50%. Extreme Duty Axles
with Dueling Rings. Heat/AC work well. Factory Fuel Heater. Canadian Light Pkg. All factory updates
installed. 125’ of 5/8” Main line. Item ID 13533. Sam x603
2010 John Deere 1110E Forwarder
- Super Clean machine. 8 Wheeled. Only 5800 hours. One owner and
well maintained. Hard to find them with low hours like this!. Item ID 12947. Sam x603
2010 John Deere 703J Harvester - 9622 Hours. One Owner Machine. Good
undercarriage. Recent boom update. Well maintained. Runs very well.
The Original Lumberman’s Exchange
‘02 Prentice 490 Item ID: 14047 Contact: Austin Ph: 800-315-9950 x606 Will include service trailer. Item ID 13419. Sam x603
2011 JD 748H Grapple Skidder - 4600 hours. Good running skidder. 30.5 tires at 60% with dualing rings.
Dual arch grapple. Heat/AC. Well
maintained. Item ID 13176. Sam x603
2012 JD 544K w/Log Grapple - Super Clean Machine! 5870 hours; Enclosed cab with heat and A/C; Ride control; Rockland log grapple; Tires at 80%. Item ID 13534. Sam x603
2012 JD 848H Dual Arch Skidder.
Only 4200 hours. Factory warranty until 5000 hours. Great running
condition. 35.5 tires at 60%. Tight and Dry. Great value. Item ID 13482. Sam
2012 John Deere 548GIII - Single arch with winch, blade extensions, 1 new 28L and 3 @ 50%. This is still a new
machine with only 3600 hours. Item ID 13780. Sam x603
2012/13 John Deere 200D Excavator - This is still a like new excavator
with only 3000 hours. Comes with a stationary rockland thumb that can
be adjusted manually. Great buy on this Deere. Tinted windows to help keep the sun and heat out. Item ID 13856. Sam x603
2013 John Deere 437D - This loader is still like brand new. It has been well taken care of with only 2932
hours. CSI delimber, Kodiak, Series 3 hydraulic landing gear. You will not find another loader this clean. Item ID 13822. Sam x603
2014 JD 753J Feller Buncher - NEW! - Treat as NEW! Only 381 hours. Standard warranty expired, but
Visit us online at www.LBXonline.com!
PERFORMANCE AND SAVINGS WORTH HOWLING ABOUT! In side-by-side testing, Morbark® put the Alpha 3 insert to the test against competitor, GrinderCrusherScreen™, GCS14B1 insert. The testing crew encountered the same challenges customers face in the field every day, including working in dusty and dirty conditions, and hitting foreign objects often hidden from sight in materials being processed. In total, 20,450 yards of waste was processed, equating to approximately 255 yards per hour.
SIDE-BY-SIDE TESTING
In the end, the results clearly proved the Alpha 3 not only out-performed the GrinderCrusherScreen insert, but also has the potential to save customers thousands of dollars in grinder wear parts on an annual basis. Now that’s something to HOWL about!
AVG COST PER GRINDING HR
GRINDER CRUSHER SCREEN
MORBARK® ALPHA® 3
PART#GCS14B1
PART#40749-571
31 HR, 35 MIN
44 HR, 35 MIN
$24.00
$25.05
.76¢ PER HR
.56¢ PER HR
2,080 HR
2,080 HR
$28,454.00 PER YR
$20,966.00 PER YR
AVG INSERT/ TIP RUN TIME MSRP COST PER INSERT
AVG. ANNUAL OPERATING TIME: TUB GRINDER AVG. ANNUAL INSERT/ TIP COST
ANNUAL SAVINGS
$7,488
To find an authorized dealer near you go to www.morbark.com/find-a-dealer. Be sure to ask about special pallet discounts, too.
Timberjack 450C
Item ID: 13675 Contact: Austin Ph: 800-315-9950 x606
‘11 Tigercat 845C Item ID: 13927 Contact: Sam Ph: 800-315-9950 x603
has Extended Warranty on Major
much to say about this feller buncher.
Totally loaded with extras. Has
with only 1452 hours. Has a 2000
Components to 2017 or 3000 hours. counterweight/running boards.
Includes the JD 22” Hot Saw with 40 degree tilt. 36” wide flotation pads.
Simply perfect condition. New price
is $445,000. Save $40,000 for only 380 hours of use!. Item ID 13574. Sam x603
2014 John Deere 160G Excavator -
Low hour excavator with only 1500 hours. Still a new machine. Item ID 13841. Sam x603
2014 John Deere 643K - There’s not
‘89 Cat D4H LGP Item ID: 13999 Contact: Austin Ph: 800-315-9950 x606
518 CAT Grapple Skidder Item ID: 14036 Contact: Austin Ph: 800-315-9950 x606
It’s still brand new out of the box
skidder. Save a lot of money on this
Power Co in Colorado and is a
hour warranty. It comes mounted on
new one. Item ID 13933. Sam x603
5000 actual hours. It shows to be
30.5 tires at 95%. Comes with a 22”
tower head. Item ID 13864. Sam x603 2015 John Deere 748L - This is still a new skidder with only 1480 hours.
Owned by a construction company
that is no longer needed. Dual arch,
winch, joystick controls, turn around seat, wide blade and HD axles. Was bought new in Jan and still has
factory warranty and an extended
warranty can still be bought for this
slightly used skidder over a brand
2015 John Deere 748L - This skidder is still smells new with only 1000
hours of use. Mounted on 30.5 X 32 tires with a new set of tire chains.
Dual arch, winch, joystick controls,
turnaround seat, wide blade and HD axles. Save on this over a brand new
skidder because this is still new. Item ID 13935. Sam x603
84/85 John Deere 440B/C - This
skidder came in a box to Lavaco
For Classifieds Call Your LBX REP at 1-800-315-9950
very low hour skidder with only a B model, but have to order parts for a C. It comes with the original
tires, 18.4 at 25% with chains on all 4 tires. New clutch, center is tight and
everything works. This is a very clean skidder. Item ID 13908. Sam x603 JD 643D Saw Head FB - Decent
machine. Estimated 1993 model. Serial number available for
verification. Recent JD recon
engine. Tires at 60%. Cameco Saw
February 2017 n 19
Integrity • Precision • Quality • Value
Woodmaster See why we are your Best Source for bandsaw blades! We offer the highest quality welds and our people use the highest level of integrity and precision to give you the best bandsaw blades in the business—we ship all over the US. Satisfaction always guaranteed!
Thin Kerf
Band Saw Blades
Electric 3Phase Slab Edger
Item ID: 13998 Contact: Austin Ph: 800-315-9950 x606
‘96 Bell GH120 Track Fellerbuncher w/Swing Boom Item# 13802 Contact: Sam 800-315-9950 x603
Ask About Our Dismanteling Blades
ck Cheut Our O
1-888-857-5153
Quality • Our Service • Our Price
‘03 John Deere 748GIII
Item ID: 13851 Contact: Sam Ph: 800-315-9950 x603 JOINTS NEW REAR AXLE BOLTS.
‘14 Komatsu WA200 Loader
One Owner, low hours! Item ID: 14010 Contact: Austin Ph: 800-315-9950 x606 Head. Needs new teeth. AC works.
Running today. Priced to move. Item ID 12845. Sam x603
John Deere 440C - It has a rebuilt
engine about a thousand hours ago,
and it is working daily. Many videos available of it working, and can be sent upon request. Item ID 13887. Austin x606
John Deere 540B - This is a low
hour 540B with only 8000 hours.
22 n
‘06 Western Star Michigan Special Item ID: 14011 Contact: Austin Ph: 800.315.9950 x606 Transmission’s good, rebuilt winch is good and the center section is tight.
Comes mounted on floats. This little skidder should walk on top of the water. Item ID 13867. Sam x603
John Deere 640 - This is a grapple
skidder with a winch. New engine
and 2 new rear 28’s and the front are about 15%. Item ID 13848. Sam x603 John Deere 640 D - Rebuilt eng 2
new front tireS 4 NEW CHAINS 2
NEW BATTERIES NEW STARTER
NEW ARCH BOLTS NEW FRONT U
The Original Lumberman’s Exchange
Item ID 13475. Sam x603
John Deere 648D dual Arch - Great
running machine. Item ID 13493. Sam x603
John Deere 748 G-3 - This is an
awesome skidder it just had a full
service all bushings and pin replaced
and READY FOR WORK! it has 9745 hours on it. Item ID 13381. Sam x603 2009 John Deere 648H - This is a one
owner machine, every switch works, interior is very clean, radio, heat/ac.
Air ride works as it should. Tires are 30.5x32. Extremely clean machine
with no leaks. Cutting edge on blade is excellent, with no cracks or welds anywhere. Item ID 13747. Austin x606
2012 John Deere 648H Skidder -
5800 hours and tires are 45%. Dual
arch with winch. Selling because of
Firewood Proc.
Item ID: 13865 Contact: Sam Ph: 800-315-9950 x603 upgrade. Item ID 13653. Sam x603 2014 John Deere 648H - Dual arch
with winch, direct drive. Comes with 6000 hour extended warranty. Has
only 2600 hours. Has new 30.5 X 32
26 ply on rear and 70% on front. Still
a new skidder and priced to sell. Item ID 13696. Sam x603
2013 JD 848H Grapple Skidder - 4200
hours. Tires at 50%. Winch. Very good running condition. Pins are tight.
Machine is dry. Engine runs great. Item ID 13555. Sam x603
1991 John Deere 640D Skidder - 23.1 x 26 Tires 50%, Rebuilt Trans.,Good Tight Machine. Item ID 13191. Sam x603
1995 JD 290D with Hytec 4700
Harvester Head - 290D in good
condition. Engine just overhauled. Undercarriage at 50%. New water
pump. Runs well. Cab has heat and
air with stereo and all run well. Head recently updated and does great job
Visit us online at www.LBXonline.com!
(888) 820-3962 in hardwood. Priced to sell!. Item ID
come with tracks. Front blade. JD
Skidder w/ESCO Swing Boom
Detroit 6V53 engine with 195HP.
John Deere 20 hole Sweda wheels -
Item ID 13363. Sam x603
Front blade. Detroit 6V53 engine. No
Clark 40,000 lb Winch. ROPS Cab.
12206. Sam x603
These 50’s are mounted on hard to
engine. One owner. Double bunk.
FMC
find 20 hole John Deere sweda rims.
1977 (est) FMC 220CA Tracked
available. Item ID 13852. Sam x603
6V53 cranks and runs well. Military
Still 50% tread left on these tires. 4
FABTEK
2004 Fabtek 546C Forwarder - Good running condition. 30.5 tires in front at 60%. 650 tires in back at 60% and
Skidder - Good running unit. Detroit style tracks at 70%. Fixed ESCO
Grapple and working Winch. Front Blade. Item ID 13226. Sam x603 1977 (est) FMC 220CA Tracked
Grapple - Good running condition. winch....they cannot fit with swing
boom grapple. Military style tracks at 70%. Item ID 13227. Sam x603
2012 Refurbished FMC 210 Tracked
Clark 28000 Powershift transmission. Includes bolt on grapple head with full function. New Paint. Item ID 12731. Sam x603
FRANKLIN
Skidder - 1976 Model that has been
1995 Franklin 170 - Enclosed cab,
since updates were done. Includes
4 brand new 23.126 firestone tires,
totally refurbished in 2012. No hours warranty on machine and tracks.
For Classifieds Call Your LBX REP at 1-800-315-9950
single arch with a winch, new paint, around 15000 hours. Item ID 13910.
February 2017 n 23
‘06 Brewco B1600 Resaw
Wood-Mizer LT40
Item ID: 13862 Contact: Sam Ph: 800-315-9950 x603
Item ID: 13995 Contact: Austin Ph: 800-315-9950 x606
John Deere 640 Grapple Skidder ‘13 Komatsu WA200PZ Loader One owner machine! Item ID: 14009 Contact: Austin Ph: 800-315-9950 x606 truck. Item ID 13639. Sam x603
GRINDMASTER
Suddreth Horizontal Grinder - This is
‘14 Hurdle 3-Hd Block Sawmill Item ID: 13997 Contact: Austin Ph: 800-315-9950 x606 Austin x606
Franklin 170 Skidder - This would be a great starter skidder. It is a single arch with winch. Runs good and
pulls good. Detroit 453 turbo and
3 speed power shift transmission.
Good center section. There are a few
‘01 Benson 34’ End Dump Item ID: 13818 Contact: Sam 800.315.9950 Ext. 603 13786. Sam x603
24 n
Overall lightly used, in really good
shape. Width capacity is around 30” maybe even wider. Item ID 13889. Austin x606
HOOD
Rotobec Grapple. Item ID 13535. Sam x603
2000 Hood Model 32000 - on Self
Propelled Jackson Carrier; Loader
mounted on a Jackson 8 x 8 Straight
Frame Carrier. Machine is Equipped
with Live Heel, Hydraulic Cab Riser, John Deere Power Unit and Heavy Duty Rotobec 5052 Log Grapple.
Hour meter not working. Loader
working well. Video available. Item ID 13540. Sam x603
HYDRO-AX
reman engine. New Radiator; New
prentice grapple with a new turn
ONLY 1600 hours! 30.5 tires at 90%.
Hydraulic Pump; Comfort cab with good working heat and air; Tires at 80%. Item ID 12450. Sam x603
GMC
boxes, covered hose reels, overhead
and for a start up company. Item ID
It has top and bottom infeed rolls.
Sliding Butt Board from 8’4” to 16’4”.
2003 Hydro Ax 670 with Bunching
Franklin 3000 - 4BT Cummins engine tires. Good machine for the money
connects to the grinder with a pipe.
Dedicated Slasher pump. 4 wire hose.
1995 Hood Knuckleboom - John
- 7500 hours, but just 5000 hours on
2000 GMC 1.5 ton Service Truck
with approximately 600 hours. Needs
comes with a blower, and the blower
controls & AC. Boom and Cab Lights.
2003 Franklin Q80 Grapple Skidder
leaks, but nothing major. Item ID 13819. Sam x603
a 60 HP low rpm Horizontal grinder,
Item# 13848 Contact: Sam Ph: 800-315-9950 x603
- PTO driven air compressor, big
crane, cat engine with 324,000 miles,
5 speed, new disc brakes all the way around. Used to be a Cat service
The Original Lumberman’s Exchange
Deere engine, plumbed for bucksaw, motor. One owner machine with
17,500 hours. Item ID 13754. Sam x603
1999 Hood 24000 Mobile Slasher
- Good running condition. Hood Circle Saw. 32’ Live Heel Boom.
Approx 11,000 hours. Cummins
6BT5.9 Engine w/177HP. 13 Port
Swivel. Extra Large 43” Bearing. 50” x 60” Extra Large Cab with Joystick
Head - Super nice machine with
Cummins 6BT8.3 engine. AC/Heat. Side pocket style head. Jewel of a
machine!. Item ID 12729. Sam x603
2004 Hydro Ax 470 - This cutter has around 7000 hours. It’s a clean and tight machine. Only reason selling
is due to an upgrade. Item ID 13846. Sam x603
2004 Hydro Ax 670 - Engine has
about 500 hours, new saw motor and
Visit us online at www.LBXonline.com!
Frick Sawmill
Item ID: 13904 Contact: Austin Ph: 800-315-9950 x606 disc last year. Previous owner had the hydrastats redone. This has a
‘04 CAT 953C Front-end Loader Item ID: 13854 Contact: Sam Ph: 800-315-9950 x603
22” high capacity head and is a very
ID 13799. Sam x603
50% tread. Item ID 13828. Sam x603
Feller Buncher - with about 8800
clean machine. Mounted on 34’s with HydroAx 611B - New injectors,
injector pump. New 5.9 cummins
engine. Rebuilt hydraulic pump and new teeth. Item ID 13768. Sam x603
1999 Hydroax 511EX - New cummins engine with only 1500 hours.
Caterpillar just replaced gear box
to hydraulics at the end of summer.
11000 hours total on cutter. Tires are 28L’s @ 80%, 2 @ 40% and one slick.
Brand new center section. 20” single post head. Heat and air work. Item
‘08 John Deere CT332
Item ID: 13855 Contact: Sam Ph: 800-315-9950 x603
1998 Hydro Ax 611EX Saw Head
Engine rebuilt 1500 hours ago; 8750
hours. Bunching Saw Head has large
head. Heat and A/C work. New
pocket for accumulation and lifting side shield for notching larger trees before felling. Cummins engine.
Max 7000XT processing head. 9700
bearings in saw. Cutting trees today.
Max. Excavator style. Cab guard.
Item ID 13353. Sam x603
KMC
KMC Track Skidder 2500P - John
2002 Hydro Ax 621E - Arouund
Deere winch, Model 4000, Cummins
12,000 hours on this machine.
Working daily. Item ID 13884. Austin x606
1998 711EX Saw Head Feller Buncher - 30.5-32 tires at 40%; Cummins
Item ID: 13993 Contact: Austin Ph: 800.315.9950 x606
hours; Quadco 22” Large tree saw
28L tires at 60%. Decent running
condition. Item ID 13245. Sam x603
2000 W900 KW w/Rotobec MT27 Heavy Spec
Deere Dual Arch Grapple, John Engine, Model 6BTA, Clark
Transmission 28000. Item ID 13738. Austin x606
KOMATSU
2007 Komatsu PC220LC w/2009 Log
For Classifieds Call Your LBX REP at 1-800-315-9950
hours on carrier. 7200 hours on Log Flotation pads. One owner. Very
good condition. Item ID 13464. Sam x603
2008 Komatsu D61-EX Dozer - Great Condition. 4511 Hours. Komatsu
U/C at 95%. 35% Pads. 6 Way Blade. Fully Enclosed comfort cab. Great price!. Item ID 13570. Sam x603
2012 Komatsu D61EX 15 Dozer with
only 750 Hours. Triple Rippers; Limb
February 2017 n 25
BANDSAW BLADES
We have the most popular sizes in stock & ready to ship from major manufacturers, including…
We also offer expert Sharpening Services, plus…
Gang • Edger • Scragg Trim • Split • Strob …and
just about any Custom Saws you need to keep you cutting longer… for less!
Welded to your lengths! Call Marvin Miller for a quote 231-924-5953 • (fax) 231-924-6166 • 11606 Brickyard Rd. • Holton, MI 49425
1988 John Deere 440D Item# 13781 Contact: Sam Ph: 800-315-9950 x603
Sweeps; Enclosed cab with Heat/AC; 6 way blade; Undercarriage at 90%;
Excellent Condition!. Item ID 13459. Sam x603
2014 Komatsu 450 - Only 1100
hours on this machine, in excellent
condition. Item ID 13937. Austin x606
LIEBHERR
2007 Liebherr A924C Log Handler Rubber Tired Log Loader. 13,000
hours. 40’ Reach with two section boom. 60” Log Grapple with
continuous rotation. Fixed Cab
Riser with cab guard protection.
Front push blade. Tight and dry.
Cleaned, Serviced, and Checked out for service. Can pull loaded trailer. 4-Wheel drive and steering. Top
Quality machine. Would be great for
log yard or mill work. Item ID 13476. Sam x603
2011 Liebherr A904 Rubber Tired Log
26 n
‘97 Prentice 210E Item# 13795 Contact: Sam Ph: 800-315-9950 x603
58” Precision Chipper
Item ID: 13975 Contact: Austin Ph: 800-315-9950 x606
Schutte Hammermill Grinder
Item ID: 13965 Contact: Austin Ph: 800-315-9950 x606
Handler. Liebherr 4 cylinder engine
undercarriage. 5221 hours. Good
2006 Morbark 6600 Horizontal
hours. Fixed cab riser. Two section
$30,000 on upgrading delimber. Item
this well maintained machine. Has
with great fuel economy. 11,230
boom with 38’ reach. Cab protection. 4-Wheel drive and steer. Can pull
running condition. Owner just spent ID 12992. Sam x603
MORBARK
loaded trailer. Cleaned, serviced and
1987 Morbark 27 WCL NEEDS
for work. Located in Baltimore, MD.
boom loader, 3 knife disc, Newer
inspected. Tight and dry and ready Item ID 13477. Sam x603
2011 Liebherr A924 Rubber Tired Log Handler. Liebherr 4 cylinder engine with great fuel economy. 11,230
hours. Fixed cab riser. Two section
boom with 38’ reach. Cab protection. 4-Wheel drive and steer. Push blade. Can pull loaded trailer. Cleaned,
serviced and inspected. Tight and
dry and ready for work. Located in
Baltimore, MD. Item ID 13478. Sam x603
LINK-BELT
1997 Linkbelt 3400 has rebuilt Pierce Stroke Delimber. 36” Pads on 60%
The Original Lumberman’s Exchange
MOTOR - Morbark 1000 Knuckle discharge chute, New banding
around disc, Brakes and tires are also OK, Everything works well Newer
clutch -- with outboard bearing, Had Cummins KTTA 750 HP engine --
needs repower. Item ID 12443. Sam x603
1997 Morbark Model 2400 Chipper -
Has a Cumins diesel engine and runs great. All fluids and filters have been changed. Item ID 13429. Sam x603 1999 Morbark 1400 Tub Grinder Loader w/Cab; 4200 hours; Very
good condition. Located in PA. Item ID 13361. Sam x603
Grinder - Approx. 6000 hours on
New Cat Dealer Rebuild 1000HP
Engine at 5000 hours. 42” X 66-5/8”
HAMMERMILL; VARIABLE SPEED INFEED SYSTEM; HAMMERMILL DRIVE INCLUDES ALL BELTS,
SHEAVES, BUSHINGS & SHIELDS. ENGINE GAUGE PANEL &
EMERGENCY SHUT DOWN
SYSTEM LOCATED IN AN ANTI-
THEFT CONSOLE. ELECTRONIC RPM SENSOR & AUTO FEED SYSTEM. 430 GALLON FUEL
TANK. 238 GALLON HYDRAULIC OIL TANK. IQAN CONTROL
SYSTEM. DUST SUPPRESSION SYSTEM. HYD OPERATED
DEBRIS CONTAINMENT DOOR. 16 FUNCTION RADIO REMOTE. SUPER PACKAGE! Optional new
knife skin - $20,000 which is half price
Visit us online at www.LBXonline.com!
‘94 Timbco 425B Item ID: 13950 Contact: Austin Ph: 800.315.9950 x606
of new. Item ID 12692. Sam x603
2010 Morbark 40 x 36 Whole Tree Chipper - 3200 hrs. Advantage 3 drum 600hp John Deere Engine.
Over 2 years warranty left on engine.
New clutch. New injectors. Complete service. Very nice condition machine. Item ID 13486. Sam x603
2010 Morbark 5500 Chain Flail
Delimber/Debarker - Cat C15 engine w/600HP. Only 1200 hours. 3 Flail design. Gross weight 68,060 lbs.
Like new! Excellent condition. Just updated by local Morbark Dealer. Ready to work! Reasonable offers
considered!. Item ID 13322. Sam x603 2007 Morbark 22 RXL 1000HP
Chipper - 8000 hrs. Cummins 1000
HP Engine runs strong. Just replaced feed tray, end spout, belly liners,
hood liners, and one pump. Machine overall is in very good condition.
S/N 2043. DISCHARGE SYSTEM: Dirt separator with deflector
hydraulically for transport. Six-way
tub. Hours are unknown. Please call
starter a year ago, new alternator
discharge spout. CHIPPER: 22”
Morbark 1000 knuckle boom loader,
Item ID 12919. Sam x603
rotation grapple, has 3-53 detroit
Hydraulic swivel/telescoping
diameter chipping capacity, 75”
diameter four-knife chipper disc
with Left Hand rotation Chip sizes: 5/8”, 3/4”, 7/8”, 1”, 1-1/4”, 2”.
Hydraulic chipper hood for easy
knife access. 30 ft. x 10 ft CAT chain infeed bed. Enclosed weatherized
operators’ cab is mounted on rubber shock absorbers with combination air conditioner/heater. Tilts
adjustable seat and joystick controls. 25 ft reach, 210 degree swing. By-pass
Daren at Ext. 603 for more details.
WOLVERINE
grapple. Lift capacity of 20,000 lbs. at
1995 Morbark Wolverine 3-Wheeled
disc clutch; Electronic RPM sensor
hours on new JD 4 cylinder engine.
10 ft. OPTIONS: reversing fan, twin with automatic back feed; 11 hp
Quincy air compressor; Pre lube on
engine while starting. Item ID 12449. Sam x603
Morbark 1200 Tub Grinder - Powered by a 3412 Cat engine, 600-hp. Tilt
Feller Buncher - S/N 4073. Only 1000 Recently replaced turbo. 23.1 tires at
50%. 16” Rapid Buncher shear head. Machine is fast and in very good
condition. Item ID 12531. Sam x603
PRENTICE
1988 Prentice 210B - New battery and
For Classifieds Call Your LBX REP at 1-800-315-9950
less than 2 years ago. Continuous engine, lever controls, plumbed for
bucksaw. Mounted on a 1978 GMC
Brigadier with 6-71 detroit with a 10
speed. Runs everyday. Item ID 13703. Sam x603
1992 Prentice 210D loader - Excellent
condition, very tight loader mounted
on a 1989 Mack truck with very good tires. Item ID 13654. Sam x603 1997 Prentice 210E - New 5.9
February 2017 n 27
Real Tuff Baler&Baggertm Save $$$ on Bedding—Bale it Yourself! Electric or Diesel, Manual or Automatic
$15,905 Effective May 1, 2012
REAL TUFF INDUSTRIES Manufactured by M & F Gauge & Specialty Co., Inc.
PO Box 693 Brownwood, Texas 76804 Phone: 325-641-8300 Fax: 325-643-3243
BUILT TO LAST www.realtuffbaler.com
Dear Prospective Customer,
S&W Bandmill
Thank you for inquiring about our Real Tuff Baler! From baling wood shavings to aluminum cans, the Real Tuff Baler is built to last, and priced for a quick return on your investment!
Real Tuff Baler
Real Tuff Baler Dimensions & Specifications
• Easy to use
- (2) Hydraulic Cylinders are controlled by using a two spool valve
• Built of high quality materials and workmanship
Item# 13820 Contact: Sam Ph: 800-315-9950 x603
- 30 H.P. motor (220/440 volt 3 phase) starter not included
• Heavy duty to enable a broad spectrum of baling options • Easily loads by conveyor or manual method
Item ID: 13959 Contact: Austin Ph: 800-315-9950 x606
Firewood Processor w/Conveyor
- 25 G.P.M. Pump - 50 Gallon reservoir capacity
. Easy to use
. Built of high quality materials and workmanship
- Only the highest quality industrial components are used
. Heavy Duty to enable a broad spectrum of baling options
. Easily loads by conveyor or manual method Most Popular Baler Sizes
Real Tuff Industries Real Ruff Baler Size 12” x 16” x 36” 12” x 16” x 32” 11” x 17” x 36” 8” x 18” x 36” 5” x 10” x 16” - Call For Price
Bale Size
4.0 cubic foot bale 3.5 cubic foot bale 3.9 cubic foot bale 3.0 cubic foot bale 0.4 cubic foot bale
Bales per Hour
50 - 60 bales per hour 50 - 60 bales per hour 50 - 60 bales per hour 50 - 60 bales per hour 50 - 60 bales per hour
Phone: (325) 641-8300 Fax: (325) 643-3243 . Custom baler’s can be manufactured to your specifications .
Real Tuff Baler Dimensions & Specifications Manufactured by M & F Gauge Specialty Co., Inc. 2 - Hydraulic& Cylinders are controlled by using a two spool valve 30 H.P. motor (220/440 volt 3 phase) starter not included PO Box 693 • Brownwood, Texas 76804 25 G.P.M. Pump 50 Gallon reservoir capacity Only the highest quality industrial components are used www.realtuffbaler.com Real Tuff Baler Price: $12,997.00
Terms: 50% deposit upon receipt of purchase order. The blance is due upon completeion which will be approximately thirty days from placement of order. F.O.B. Brownwood.
03/08
‘88 John Deere 440D Skidder
Item ID: 13781 Contact: Sam Ph: 800-315-9950 x603 11,793 hours, Machine is in good
condition, it has been sand blasted
‘03 John Deere 648GIII Item ID: 13954 Contact: Austin Ph: 800.315.9950 x606
‘04 Hood Loader 28000
Item ID: 13971 Contact: Austin Ph: 800-315-9950 x606
cummins engine, turntable bearing
Rotobec 4048 Grapple. Only 1050
Joystick, Heat and A/C, boom
hydraulic stands. Excellent condition.
and seal, fuel pump and battery.
repinned, cylinders repacked. Total hours at 12000. Bucksaw hookup.
This loader is used to feed a chipper. Item ID 13795. Sam x603
1999 Prentice 210E - Comes with a bucksaw. Levers, 11000 hours.
Repacked all cylinders and valve
body. This loader has only been used to cut up logs into 9’ lengths. Never used as a delimber loader. Item ID 13784. Sam x603
2014 Prentice 2384C Loader Package - with CSI 264 Ultra Delimber and
28 n
hours! Mounted on trailer with
Contractor shutting down job. Item ID 13577. Sam x603
2432 2010 prentice skidder - It has
30.5 tires al the way around and has
6,000 hours on the machine. Item ID 13382. Sam x603
Prentice 310E - Good loader for the
and painted, low pro tires 17.5. Item ID 12759. Sam x603
210 prentice loader mounted on 2006 trailer - Excellent condition. Item ID 13505. Sam x603
Late 80’s Prentice 210 Loader - This is a late 80’s model, it had a new motor
The Original Lumberman’s Exchange
1300 hours on rotor and 1600 on engine. This is a track and dolly system, which makes it easy to
move. Has a magnetic head roller,
48” rotor with 28 teeth and a 700hp C-18 Caterpillar power unit. This
rotochopper sells for over $600,000.00 new. Item ID 13838. Sam x603
TIGERCAT
it. We replaced the saw pump last
1998 Prentice 210E - It has the 600 turbo charged cummins engine,
control valves have been redone, ac/ heater work, it also has slasher saw hook ups. Dry machine, working daily. Item ID 13913. Austin x606
ROTOCHOPPER
It has a 500hp C15 Caterpillar power
1994 Prentice 180D Log Loader -
machine is still like new with only
circle saw. Item ID 13879. Austin x606
3,000 hours on it, also comes with a
tires, new paint, & lights, with a 350 ID 13900. Austin x606
2014 B66TD Rotochopper - This
2000 Tigercat 845B - it has 8900 hrs.
2011 MC266T Rotochopper - This is
Cummins Engine 3 stage jake. Item
Item ID: 13939 Contact: Sam Ph: 800-315-9950 x603
installed 2 years ago with around
money. Item ID 13762. Sam x603
Prentice 120C Boom Truck - Great
‘00 Tigercat 845B
a great chipper with only 3600 hours. unit. Comes with spare bolts, teeth,
screens and bearings. Item ID 13837. Sam x603
the Hydraulic Pump has 2000 hrs on summer. Ready to go!. Item ID 13619. Sam x603
2000 Tigercat 845B - This 845B has
14000 frame hours with 5000 hours on an 8.3 cummins engine. New
sprockets, bottom and top rollers,
rails, idlers, 36” tracks, seat and all new A/C parts. Track adjusters,
and all cylinders on head have been
repacked. Comes with a 22” hotsaw with 45 degree rotate. This is a very clean cutter, owner just wants to
update. Item ID 13939. Sam x603
Visit us online at www.LBXonline.com!
2005 JD 6420 Item ID: 13949 Contact: Austin Ph: 800-315-9950 x606
‘01 Timberjack 460C Item# 13829 Contact: Sam 800-315-9950 x603
2004 Tigercat 240B Knuckleboom -
New 5.9 cummins crate engine with 2500 hours, turntable good, 243 CSI delimber, good tires, brakes, and
lights. 7500 hours. Item ID 13666. Sam x603
2004 Tigercat 620C - Single arch, new engine 2 months ago, has
about 13,500 hours, needs a couple of windows. Tires at 50%. Item ID
on the machine, new motor put in
Arch grapple. New 35.5 tires. Only
Item ID 13360. Sam x603
2004 Tigercat 630C - New 35.5’s on
trailer included, and reversible CSI
630 at $310,000!. Item ID 13576. Sam
has 10575 hours with a cummins
13667. Sam x603
rear and 25% on front, comes with 2 spares. Engine has 4500 hours,
with 12000 machine hours. Two new wiring harness. Item ID 13749. Sam x603
2004 Tigercat 845B - with Waratah
622 Processor. New screen, wheels,
sprockets and wheel motor. Owner used it for a month before parking
it. 5,000 hrs. on 8.1 cummins engine, and 6990 total hrs. Item ID 13625. Sam x603
2005 Tigercat 230B - Tight, and
dry machine, with 16,000 hours
around 10,000 hours, CTR Delimber Bucksaw, will sell with, or without
Bucksaw. Item ID 13911. Austin x606 2005 Tigercat 822 Tracked Feller
Buncher - Good running condition.
Tigercat 22” Hot Saw with 40 degree tilt. New center bearing and swing motor. Undercarriage at 50% or
better. Very clean. High hours, but well cared for by single owner of
land clearing business. Often idled
for hours. Total hours 19,500. Item ID 13575. Sam x603
2006 Tigercat 630C Grapple Skidder
- Very good running condition. Dual
4500 hours. Winch. Compare to new x603
2007 Tigercat 250B w/Waratah Processor - 2007 Tigercat 250B
Crawler with 2005 Waratah 622B
Processing Head. 9500 hours. The
622B Waratah head is in great shape. 3 new wheel motors on the head all new pins and bushings. Head has been totally rebuilt less than 500
hrs ago. The swing motor on the
carrier has just been rebuilt and a
new Hydraulic pump. U/C at 50%. Currently processing 600 tons/day. Runs great. Owner shutting down.
For Classifieds Call Your LBX REP at 1-800-315-9950
2009 Tigercat 620C - this skidder only engine and fire suppression system. Tires are 30.5 X 32 with 20% front,
1 new rear and 1 rear at 50%, 4 tire chains at 40%. Dual arch and no winch, extra fuel tank and tight
center pins. Excellent skidder ready to start dragging wood. Item ID 13928. Sam x603
2009 Tigercat H250 Tracked
Harvester - Tigercat Model 575
processing head. 10,880 hours. U/C
at 60%. Everything runs well and has been very well maintained. Item ID 13592. Sam x603
February 2017 n 29
Every Reputable Wide Band Supplier Offers 3 High Quality Swedish Steel 3 3” – 8” Band Width 3 16 to 20 Gage 3 Double Cut Options 3 Choice of Swage or Stellite
WOLVERINE
BUT ONLY THE BY MENOMINEE SAW GUARANTEES • Cutting Edge Plasma Welds • The Industry’s Highest Band Saw Capacity • Quick Delivery from our HUGE Inventory • Fast Sharpening & Exchange Program to Keep YOU Running • Competitive Pricing And ONLY Menominee Gives You Everything You need in a Wide Band Saw – Plus Expert Service from the Industry’s Most Knowledgeable Staff. Got a Wide Band Problem? Call Menominee Saw Today and You’ll Learn Why More Mills Trust the Pro!
TOLL FREE 1-800-582-0470 900 16th St., Menominee, MI 49858 Tel: 906-863-2609 Fax: 906-863-1147 Email: info@menomineesaw.com
WWW.MENOMINEESAW.COM 2010 Tigercat 480 Tracked Mulcher
70%. Mercedes engine and fire
upgrades and repairs. Fecon BH250
buy for for such a super clean track
- 3410 hours. $32,000 in recent
Mulching Head. Item ID 13502. Sam x603
2011 Tigercat 620D - This is a low
hour skidder with only 5500 hours on a cummins engine and a fire
suppression system. Comes mounted on 35.5 tires at 50% back and 40%
front and good chains on all 4 tires. Has the bigger 630 axles and no
winch. Center pins are tight and extra fuel tank. Item ID 13929. Sam x603 2011 Tigercat 845C - Just over
4000 hours. 5400 head and 340
degree rotation, undercarriage at
30 n
suppression system. This is a great cutter. Item ID 13927. Sam x603
2012 Tigercat 724E Feller Buncher -
2950hrs. 30.5 tires. Like new machine. One owner. Very well maintained. Item ID 13528. Sam x603
2014 630 D Tigercat - 1300hrs like new inside 35 by 15, CB, light
package, large grapple and wench. Item ID 13408. Sam x603
2014 Tigercat 630D Grapple Skidder
- Dual Arch Grapple. Just 1990 hours. 3 year/5000 hour PT warranty. 35.5
tires with dualing rings at 60%. Wide blade. Winch. Item ID 13526. Sam
The Original Lumberman’s Exchange
‘95 John Deere 450G
‘08 Timberking B20
Firewood Processor
‘12/13 JD 200D Excavator
Item ID: 13951 Contact: Austin Ph: 800-315-9950 x606
Item# 13820 Contact: Sam 800-315-9950 x603
Item ID: 13956 Contact: Austin Ph: 800.315.9950 x606
Item ID: 13856 Contact: Sam Ph: 800-315-9950 x603
x603
hours ago. It has 45,000 hours. This
234B. Only 300 hours on this
It has been in a yard the whole time.
2015 Tigercat 234B Loader - Model machine, this machine is extremely fuel efficient, and very quiet. In the cab, it has heated and cooled seats.
runs like new. Item ID 13880. Austin x606
99 Tigercat 240B Loader - This loader is a package deal, portable, and
mounted on a dump truck from
the eighties. Also this loader can
be mounted back on its trailer with
delimber. It has 4509 hrs on a reman
Cummins engine. Item ID 13455. Sam x603
Tigercat 230B - This Tigercat has a
Cummins 5.9 liter 360 Continuous roatation on the grapple w/ a 30’
reach on the boom. Joystick Controls, triple pump hydraulics, Stick and
swing function w/ a fully enclosed Cab. Machine is located in Florida. Item ID 13643. Chris x600
machine has never run in the woods. Tracks are around 50% and this
machine has been extremely well
taken care of!. Item ID 13608. Chris x600
2006 Tigercat 630C Grapple Skidder
- Very good running condition. Dual Arch grapple. New 35.5 tires. Only
4500 hours. Winch. Compare to new 630 at $310,000!. Item ID 13576. Sam x603
2014 630 D Tigercat - 1300hrs like new inside 35 by 15, CB, light
package, large grapple and wench. Item ID 13408. Sam x603
2014 Tigercat 630D Grapple Skidder
- Dual Arch Grapple. Just 1990 hours. 3 year/5000 hour PT warranty. 35.5
tires with dualing rings at 60%. Wide blade. Winch. Item ID 13526. Sam x603
TIMBCO
Tigercat 250T TRACK LOG LOADER
1996 Timbco T425B FB w/2008
have been done probably 8,000-9,000
Machine has 540 degree non
- Cummins 8.3 engine and pumps
Rotosaw Intermittent Saw Head.
Visit us online at www.LBXonline.com!
Savage Trailers,Inc. Custom Trailers and Carriers Since 1995
Savage Trailers
Savage Wood Yard Trailers
Savage Slashers
Savage Tire Balers
1
# Savage Carriers and Combo Units
S
Savage Utility Trailers
Savage Roll Off Trailers
avage Trailers, Inc., has been designing and building custom trailers and carriers since 1995. Our experience doesn’t stop there; we have been involved in the logging industry since 1980 … we know what works. Our superior design on aluminum bunks and stakes makes them #1 on the market for durability. Don’t just take our word for it; ask any of our repeat customers.
on the Market for durability
www.SavageTrailersInc.com
Email: SavageTrailers@hotmail.com
(218)666-5455 or (888)218-5455
Frick #1 Jumbo Mill
Item ID: 13957 Contact: Austin Ph: 800-315-9950 x606 continuous rotation on upper. 9900
‘99 Hydro-Ax 511EX Item ID: 13799 Contact: Sam Ph: 800.315.9950 x603
Franklin 170 Grapple Skidder
Shop Built Firewood Proc.
Item ID: 13819 Contact: Sam Ph: 800-315-9950 x603
Item ID: 13994 Contact: Austin Ph: 800-315-9950 x606
hours. New Undercarriage. New
US entry point. Item ID 13532. Sam
11k hrs on machine, new Cummins
high speed saw motor, new main
condition. Rotosaw has 360 degree
1998 Timberline Stroke Delimber -
fresh drive pump & imp. pump. 28L
main cylinders repacked. Package
glass in cab. Very good running
rotation. Cummins 6CT8.3 engine with 215 HP. Machine runs great.
Working in select hardwood today. Item ID 13548. Sam x603
1997 Timbco 820C Clam Bunk
Forwarder - “4000” original hours.
20.3 x 25 rubber at 70%. Hand sanded and painted, brand new computer
and Scorpion controls, added speed control. 2 sets of tracks , all new
Lexan. Located in Alberta, Canada.
Customer will pay shipping to closest
x603
8400 hours. U/C at 60%. Will crank and run. Owner retired. Machine
idle for past year. Item ID 13599. Sam x603
1999 Timbco 820D Clam Bunk
Forwarder - 10,300 hours. New
engine less than 500 hours ago. Can
accept bunks, but none with machine. Owner has two sets of tracks like new he will add for additional $20,000. Item ID 13494. Sam x603
1999 Timbco TF-820D Forwarder -
engine at around 8k hrs and has
26 tires some great, some decent.
Machine is ready to work, but could use a little fixing here and there. the bucket is sloppy could stand to be
pinned and bushed. No major issues!. Item ID 13212. Sam x603
2000 Timbco 415D w/2005 Fabtek
4-Roller Processor - 21,000 hours on meter. New JD 6 cylinder engine in 2011 has 7000 hours. U/C at 65%.
Extensively rebuilt with new swing motor, new charge pump, new
For Classifieds Call Your LBX REP at 1-800-315-9950
hydraulic pump, new oil cooler, all includes extra final drive, extra
computer screen, and extra swing
motor. Has new jet fit system. This machine is loaded...has pro-heat
system for cold weather start. Has
fire suppression system. All working! Hydraulic Oil just totally changed
(100 new gallons) with new filters. Item ID 13598. Sam x603
2000 Timbco 425D w/33" Bar Saw Head. 40 degree tilt on head. 540
degree rotation on upper body. One
February 2017 n 31
Now One Phone Puts You in Touch with the Single Source for all your Sawmill Needs! Corley Sawmill Machinery Tyrone Berry Carriage Drives Lewis Controls Optimization Carriage Linear & Set Shaft Lewis Controls “Electronics for sawmills by sawmillers” Tyrone-Berry Carriage Drives & Parts • Headrig Slabbers Log Turners • Bandmills & Linebar Resaw Systems Board & Gang Edgers • Trimmers
The Most Complete Line of Sawmill Machinery Since 1905! Single Machine or Complete Turn-Key Operation More Production & Profit is Only One Call Away For Parts, Service & Sales
‘05 Tigercat 230B Item ID: 13911 Contact: Austin Ph: 800.315.9950 x606
Item ID: 13909 Contact: Austin Ph: 800-315-9950 x606
mfg
Call (423) 698-0284 CORLEY
‘99 Case 850G Long Track Dozer
www.corleymfg.com • sales@corleymfg.com
‘89 John Deere 650G
Item ID: 13863 Contact: Sam Ph: 800-315-9950 x603
‘10 Shop Built Wood Processor Item ID: 13916 Contact: Austin Ph: 800-315-9950 x606
ECM by Cat. CSI delimber, good
on first try. Item ID 13560. Sam x603
Item ID: 13885 Contact: Austin Ph: 800.315.9950 x606
Sam x603
2006 711 TimberKing - With 6,716
Skidder! Brand New Crate Motor
rest. Comes with 36” grapple with
bank. 90% undercarriage. Can accept
harvester hydraulics according to
hot saw. Fire suppression system.
Auxiliary oil cooler. Good running machine. Item ID 13549. Sam x603
2000 Timbco 445D - Recent engine
and pump last winter. New sprockets and rollers. 22” quadco hot saw.
Owner retired. Located in Montana. Item ID 13790. Sam x603
2005 TimberPro 830TF Forwarder
grapple saw option. Set up with
hours. with 7,000 logmax processing head& fire suppression system.
Under carriage is real good, Runs and works Great!. Item ID 13737. Sam x603
TIMBERJACK
1969 Timberjack 225D skidder ring
Bar Saw - 9200 hours. One owner
condition!!. Item ID 13215. Sam x603
2006 Timbco/Valmet 445EXL w/
machine. 33” Bar Saw Head with 360 degree rotation. Tracks at 60%. Runs good and machine is tight. Reman
Cummins 6BT8.3 one year old. Item ID 13556. Sam x603
TIMBER KING
2005 Timberking 560 DS - Same as
at 70%. Includes bolsters and back
engine with new injector pump and
32 n
A/C, tires, and lights. Item ID 13636.
owner. Item ID 13161. Sam x603
- 6580 hours. Very good condition.
Tracks for all bogies. 710/45-26 tires
Waratah Processor Item# 13760 Contact: Sam Ph: 800-315-9950 x603
‘89 Timberjack 230A
year old Cummins 6CT8.3 engine. Resealed pumps. Rebuilt valve
2007 John Deere 2554 w/ 624
Prentice 2384, 9500 hours on perkins
The Original Lumberman’s Exchange
chains front ice chains rear, very good 1968 230 Timberjack skidder - New 353 Detroit engine, new tranny..
Runs great! Machine is tight. She’s a
workhorse !. Item ID 13470. Sam x603 1979 Timberjack 240 Grapple Skidder W/ Winch - Excellent running
condition. New brakes, 23.1x26 tires
Holds air. Best sounding 453 Detroit
out there. Starts in Very cold weather
1982 Timberjack 240A - Tight, Clean 453 has roughly 500 hrs on it,winch
rebuilt, starter rebuilt, master cylinder rebuilt, new batteries, battery wires 4 brand new ice chains, 6 new slides n
tear drops, no leaks n all the pins are super tight. New belts n some new hoses. Item ID 13557. Sam x603
1989 Timberjack 230A - It has a 4bt cummins engine, 4 speed manual
shift, and only 3,411 original hours, comes with 4 new firestone 23.1-26
tires. The transfer case & winch have all new clutches, seals, and bearings. New brakes have been installed as
well as new master cylinders. Very clean and tight machine. Item ID 13885. Austin x606
1993 Timberjack 1010 Forwarder - 16,000 hours. Good running
Visit us online at www.LBXonline.com!
PERFORMANCE UNLEASHED
We offer bandsaw and circular blades that meet the harsh demands of the pallet industry. DURABILITY
Strength and Flexibility that Lasts Longer
HIGH PERFORMANCE
Precise, Faster and Straighter Cut
EFFICIENT
Cleaner Cut with Less Waste
704.539.4442 SAWANDKNIFE.COM
Trelan Chipper
Item ID: 13866 Contact: Sam Ph: 800-315-9950 x603
condition. 6 wheeled. Tracks for rear
‘14 B66TD Rotochopper Item ID: 13838 Contact: Sam 800.315.9950 Ext. 603
bogies and chains for front tires. Item
1997 Timberjack 240D - This skidder
1993 Timberjack 380B PG Highlift
and 30% front. New brake bands in
ID 13446. Sam x603
Tree Trimmer, s/n CM4478, 5,152
hours, Delivered New in 1995, Cab
with A/C, 5 blades, 75 reach, Branton Winch, Push Blade, 4X4, Firestone 67X34.00/26 tires @ 90%, Counter
Weight, 6 cylinder Cummins Diesel Engine. FOB:Okeechobee, FL. Item ID 13090. Sam x603
1994 Timberjack 450C - Grapple
with winch, new transmissiion and hydraulic pumps. Item ID 13826. Sam x603
GREAT SELECTION COMPETITIVE PRICING QUICK DELIVERY
comes with 23.1 X 26 tires at 95% rear winch and good cable. Engine was
‘14 Komatsu 450 Item ID: 13937 Contact: Austin Ph: 800-315-9950 x606
‘04 Woodmizer LT70 Hydraulic Item ID: 13940 Contact: Austin Ph: 800.315.9950 x606
rebuilt 2 years ago. Good strong
READY. Item ID 13545. Sam x603
x603
single arch with winch with only
12000 Hours with new engine, dual
hour machine. Cummins 5.9 engine
3 at 60% and 1 new one. Excellent
running machine. Item ID 13917. Sam 1998 Timberjack 360 Cable Skidder - This is an excellent skidder with
only 6650 hours. New center section. Cummins engine with electronic automatic transmission. Item ID 13777. Sam x603
1998 Timberjack 460 - Excellent
Condition. Runs great. WOODS
2001 Timberjack 460C - This is a
6800 original hours. This is a very low has a crack in it. It can be loaded onto a lowboy. This would be great starter skidder with a new engine. Item ID 13829. Sam x603
2005 Timberjack 460D - Same thing as a John Deere 648GIII. Around
For Classifieds Call Your LBX REP at 1-800-315-9950
arch, comes with 77 X 44.00 X 32 tires. skidder. Item ID 13709. Sam x603
2005 TImberjack 608B - This cutter has 10800 frame hours with a new
undercarriage with less than a 1000 hours, 36” pads. It does have some
small leaks. Owner is going back to
February 2017 n 33
‘94 Caterpillar 320 ‘95 Franklin 170
Item ID: 13936 Contact: Austin Ph: 800.315.9950 x606
Item ID: 13910 Contact: Austin Ph: 800-315-9950 x606
2004 JCB 441 Wheel Loader ‘84 John Deere 540B
Item ID: 13931 Contact: Sam Ph: 800-315-9950 x603 smaller jobs. Item ID 13327. Chris x600
‘14 CAT 535C
Item ID: 13840 Contact: Sam Ph: 800-315-9950 x603
‘01 Frick Timber Tiger Sawmill Item ID: 13914 Contact: Austin Ph: 800-315-9950 x606
rubber tired cutters because his job
- This Machine has a Brand new 4
x603
out of frame. Transmission has been
has changed. Item ID 13898. Sam Timberjack 240 - In excellent
condition! Well maintained with 453 detroit. Lots of new parts. Item ID 13785. Sam x603
Timberjack 380 Skidder - Tight
machine. Runs great. Low Hrs. One owner. Item ID 13468. Sam x603
Timberjack 460 Grapple Skidder. - This machine is an excellent
condition. Running daily!. Item ID 13860. Sam x603
‘69 207 Timberjack cable skidder
34 n
cyl Perkins Engine, Major Overhaul
completely overhauled out of frame. Reverse box also overhauled out of
frame. Has a new Injector pump and all new injectors. 25% on tires on it. Item ID 13283. Chris x600
‘88 450B Timberjack - Put new
centerpins in 8 months ago, it has a
new eslking beams & new radiator. Goo winch, 100” Esco grapple,
all new drive lines, excellent 6 cyl
cummins motor, good brakes. It’s skidding 25-30 loads a week on
The Original Lumberman’s Exchange
1979 Timberjack 230 Forwarder -
Good running forwarder with 80%
rubber. Serial Number: 792888. Open cab. Detroit engine. Simple but hard working machine. Very clean for its’
age. Hard to find. Item ID 13057. Sam x603
1996 Timberjack 230 Forwarder - 15,000 hours. Good running
condition. Working today. Serco
Loader. Dry and still runs strong. Item ID 12943. Sam x603
1980 Timberjack 240E cable skidder - Has the big 23.1x26 tires (60%) with brand new chains on all 4.
Detroit 4-53, Gearmatic 119 winch with 10 chokers. 4 speed manual
transmission. Professionally made grapple on front blade. Just put a
Brand new Hercules Winch on.This machine starts, runs and operates
like new. You won’t find one in better
Item ID: 13888 Contact: Austin Ph: 800-315-9950 x606 shape. Item ID 13542. Chris x600
1986 Timberjack 240a skidder. 23.1 tires. Recently overhauled engine.
Machine close to 13,000. Engine only 400 to 500 hours. Item ID 13944. Austin x606
Timberjack 380b double arch skidder - 5.9 cummings with 4 speed power shift transmission. New gauges on
the dash so hours unsure. New LED lights all around. Motor has rotary injection pump. Winch is good.
Recently came off the job and is field ready. Item ID 13942. Austin x606
Timberjack 380b skidder - Single arch skidder with a new 5.9 cummings
motor, less than 200 hours. Rebuilt 4 speed power shift transmission.
Good center pins. Winch has new brakes, good grapple. New inline bosch injection pump, makes the
motor come alive. rear tires 60/70% front tires 20/30% Machine is field ready. 1 set of ice chains for an
additional $1000. Item ID 13941. Austin x606
2002 Timberjack 460D - This skidder
Visit us online at www.LBXonline.com!
PIPER’S Saw Shop Late 80’s Prentice 210 Loader Item ID: 13879 Contact: Austin Ph: 800-315-9950 x606
5 7 0 6 • 5 4 8 • 800 Promotional Pricing Offer
Simonds Red Streak Hard Back 1-1/4” x .042 x 3/4” or 7/8” Length 13’2”
$14.71 $14.27 each Tell us you saw it here!
L im it e d T im e O n ly
‘06 Caterpillar 517 Item ID: 13869 Contact: Sam Ph: 800-315-9950 x603
is the same thing as a 648GIII and is in excellent condition. New engine has about 4000 hours. Torque
convertor transmission. 14 hole
wheels. Tires are 30.5’s at 55% and one at 80%. Center has very little
80% Video: http://youtu.be/R_
2005 Valmet 860.1 8-Wheeled
packed. 10,200 hours. Largest of
up skidder for the several years.
x600
hydraulic transmission and gear
370.2 processing head with less than
slack. This skidder has been a back Skidder has 12000 hours. Item ID
MQZe5QEFw. Item ID 13572. Chris
VALMET
13805. Sam x603
1998 Valmet 603 3-Wheeled Buncher
come by! 653 Detroit. Runs Great!.
hours on 4BT3.9 Reman Cummins
1981 Timberjack 520 - Very hard to Item ID 13741. Sam x603
2002 Timberjack 608s with hot saw
- Approx. 6000 hours, Machine is in very good shape and has been well
maintained. Item ID 12194. Sam x603 ‘98 Timberjack 1270B - 7,300 hrs. Perkins 6 Cylinder Engine. All
modules and computer are brand new. Tires on average are around
- 6500 hours on total machine but no Engine. Equipped with 18” Waratah High Speed Disc Saw. 28L x 26 Tires at 40% complete with chains. This machine has been extremely well maintained and runs very well.
Hard to find them in this good of
condition. Has a twin that is available if you need two units. Item ID 12524. Sam x603
Forwarder - 17,800 hours. New
box in 2013. $70,000 of updates in 2012. Bogies just resealed. Spare
pump ($7,000 value) Good running condition. Sisu engine uses 4 gal/
hour. 16 ton capacity. One set of Mud Tracks. Front blade. Hood guard. Item ID 12267. Sam x603
2005 Valmet 941 Harvester - Totally refurbished head to toe! Very good
running condition. Over $50,000 in recent updates and maintenance.
New center pin bushings; new bogey seals; valves resealed; all cylinders
For Classifieds Call Your LBX REP at 1-800-315-9950
rubber tired harvesters. Has Valmet
4000 hours. Engine runs well. Tires at 50%. This is a hard to find gem and
priced below market. Item ID 12569. Sam x603
2005 Valmet/Timbco 415 Harvester with 370E Head - 15,400 hours.
370E Harvesting head just added in 2010 and has 7000 hours. 36” Triple Grouser tracks rebuilt one year ago and are at 80%. Sisu engine that is
very stingy on fuel. 8’ squirt at end
of boom for 30’ reach. Reversible fan
and auxiliary oil cooler. Still runs OK.
February 2017 n 35
‘15 John Deere 748L ‘15 Tigercat 234B Loader
Item ID: 13935 Contact: Sam Ph: 800-315-9950 x603
Item ID: 13880 Contact: Austin Ph: 800-315-9950 x606
‘06 John Deere Firewood Proc.
2004 John Deere 648G III Item ID: 13878 Contact: Austin Ph: 800-315-9950 x606
‘15 Morbark M18R Chipper Item ID: 13945 Contact: Austin Ph: 800-315-9950 x606
Cutting today but will needs some basic updates soon. Item ID 12266. Sam x603
2007 Valmet/Komatsu Model 911 Extreme Harvester - Only 4000
hours on this special machine. Has new Log Max 6000 added in 2013.
Individual tracks on each hub allow this machine to climb where NO
OTHER MACHINE can go! 4 New 700 tires and rims come with it for
rubber tired operation. Recently gone through and updated. Very unique
and hard to find a machine like this!
36 n
John Deere 540B Item ID: 13867 Contact: Sam Ph: 800.315.9950 x603 Priced well below market. Sold new without head in 2008 for $575,000!. Item ID 12571. Sam x603
1998 Valmet 603 Feller Buncher w/18” Waratah Hot Saw. Just
over 10,000 hours. New 28L x 26
Cummins 4BT3.9 has 130HP and
plenty of power. Owner states that it
cuts perfectly. Totally ready for work. Inspected and tested and woods ready. Item ID 13503. Sam x603 1997 Valmet 890 Forwarder -
8-Wheeled Forwarder. 18,400 hours. Hood guard. Runs well and well
maintained. 20 ton capacity. Tires at 40%. Includes removable carry bin
for biomass or wood waste. Item ID 13462. Sam x603
TIMBERPRO
tires - 20 ply. All oils just changed
2005 TimberPro 620 Bogey Grapple
New radiator fluid—flushed and
condition. Big Capacity Grapple!
to synthetic oils. New fuel filter.
replaced. New saw teeth on disc
plus about 100 spare teeth. $15,000 in recent upgrades. FOB: Canada. New sensors. New batteries. All hoses inspected and replaced as
needed. New O-Ring seals in valves.
The Original Lumberman’s Exchange
Skidder - Very good running
9400 hours. Tires at 40%. Totally gone through by TP Dealer who did the following: Repacked and resealed
hydraulic cylinders – grapple arch, steering; Replaced hydraulic hoses
and lines where needed – fill pump,
Includes Green Chain Conveyor! Item ID: 13894 Contact: Austin Ph: 800-315-9950 x606
grapple, etc; Repacked hydraulic fill pump; Replaced exhaust; Replaced
center pins; Straightened and painted panels; Changed all fluids and filters; Re-insulated cab; Checked and fixed
wiring as needed. Item ID 13438. Sam x603
2007 TimberPro 810 Combi Machine - Forwarder set up but comes with
rebuilt Log Max 750 processing head. Less than 5200 total hours. Runs very well. Has blade and plumbed for
a clam bunk. New swing gear box. Quick attach in 15 min. to switch
head to grapple. Cummins 6.7 QSB
engine. 260HP. Optional Tracks on all bogies adds $10,000. Item ID 13501. Sam x603
2010 TimberPro 725B w/Rolly II
Processor - Super Clean Machine. Runs great. Has worked double
shifts so it has higher hours at 13,500, but has been well maintained. New U/C last year. 24” grousers. All
pumps rebuilt last year. Gull wing
Visit us online at www.LBXonline.com!
‘95 John Deere C6 Tree Farmer
Item ID: 13920 Contact: Austin Ph: 800-315-9950 x606
27’ Utility Curtain Side Trailer Item ID: 14001 Contact: Austin Ph: 800.315.9950 x606
‘06 John Deere 748GIII Item ID: 13930 Contact: Sam Ph: 800-315-9950 x603 engine cover with hydraulic lift for easy maintenance. Rolly II in good condition and computer measures
‘90 Bell Super T Item ID: 13896 Contact: Sam Ph: 800-315-9950 x603
well. Owner retiring. Bought new for
7” post. Comes with a barko loader
2006 TimberPro 830 COMBI
been converted to electric power.
$540,000!. Item ID 13362. Sam x603 Harvester/Forwarder - Just 5700
hours. Very good condition. Comes
mounted on a truck that has also Item ID 13926. Sam x603
PORTABLE SAWMILL
with grapple for loading forwarder
36” Portable Sawmill - Maximum
for harvesting. 2 sets of tracks for
of cut-20’6” Powered by a Koehler
and Log Max 7000 processing head bogies. Set up for quick change
from harvester to grapple. One man operation. Log Max head has top
saw and runs well. Compare to new machine at $650,000. Item ID 13439. Sam x603
PLANERS
2006 Logosol Planer - This is a 10” 4 sided planer that has removable side cutters that will take up to
12” lumber and includes a blower system. Item ID 13428. Sam x603
POLE & POST PEELERS
PS8 Post Peeler - This peeler has
been converted to electricity over
hydraulic. Comes with a operators cab, electric boxes, conveyor and
kickers and will peel a 3” post to a
diameter log- 36” Maximum length Diesel 9.8HP Blade-1-1/4” by 13’2”
long 12 Volt saw-head precision up/ down. Item ID 13897. Austin x606 36” Portable Sawmill - Maximum
diameter log-36” Maximum length
of cut-20’6” Powered by Koehler gas 19HP Blade 1-1/4” by 13’2” long 12
Volt saw-head precision up/down 12 Volt Electrical Forward/Reverse Saw Head Travel. Item ID 13899. Austin x606
Dixon Sawmill - VERY UNIQUE
AND EFFECTIVE MILL! Dixon 52 in bottom blade and 38 in top blade. It
has a four blade vertical edger diesel powered with a fuel efficient duezt 247hp motor. Item ID 13812. Sam x603
Woodmizer LT 40 - LT 40 Hydraulic/
There are around 30 extra blades, that
new. An excellent condition !. Item ID
with a 100 gallon fuel tank. Item ID
Portable Comes w/15 Blades; some 13606. Sam x603
Woodmizer LT-70 - comes with
will come with the machine, along 13906. Austin x606
ROLLING STOCK
ext. & edger. 62 HP CAT REMOTE
1998 Peterbillt 378 - Cummins 500hp
EDGER 2500HRS TRAILER PKG
speed and 40K rears. New fifth
STATION 4400HRS 12’ EXT DIESEL ACCUSET 2 WITH EXTRA UNIT
NEVER USED. ALSO HAVE 25HP ELECTRIC CONVERSION WITH SWITCH GEAR EXCELLENT
CONDITION LOW HRS NEW
REPLACMENT 75-80K. Item ID 13564. Chris x600
Woodmizer LT 40 portable bandsaw mill. Excellent condition. 20 ft w/
12’ bed extension, 18 HP B&S motor,
only 530 hrs, blade sharpening tool & setting jig. Item ID 13605. Sam x603 Woodmizer LT70 Fully Hydraulic
N-14. Just over 1,000,000 miles, 10
wheel, power divider, front rear end, engine wire harness, head gaskets, injector o-rings, front cover seal,
reman transmission about 2 years ago. Item ID 13800. Sam x603
2001 Benson end dump - This is a
very nice 34’ aluminum end dump with an electric tarp, aluminum
wheels and 24.5 tires. Single point spring suspension. Has the small
door in tailgate. Item ID 13818. Sam x603
SAWMILL
- With only 2000 hours this Mill
‘00 Hurdle Model #2 - Circular
mill, and the edger have Caterpillar
power B32 minor edger computer
is in excellent condition, both the
engines. The woodmizer has the 62
HP and the edger has a 26HP, it has
the accuset 2 setworks, and the twin blade edger which has 900 hours.
For Classifieds Call Your LBX REP at 1-800-315-9950
Sawmill 2 Head Block w. 671 Detroit setworks, infeed deck and outfeed rollers, dust chain. Item ID 13825. Sam x603
‘99 Meadows Sawmill - Computer
February 2017 n 37
Press Releases February 2017 customers throughout the region will continue to receive the exceptional service they’ve come to expect.”
Bandit Industries Expands Bobcat of Connecticut Dealership Territory
B
andit Industries has expanded the territory for Bobcat of Connecticut, the company’s authorized dealer for Bandit small equipment sales, parts and service. Bobcat of Connecticut now serves Bandit customers throughout Connecticut and western Massachusetts. Bobcat of Connecticut has been in business for over 25 years and joined the Bandit dealership network in 2015, bringing decades of combined experience to the Bandit brand. Bandit’s former dealership for the area, Massachusetts-based Tyler Equipment Corporation, is exiting the tree care market. Bandit Industries and Tyler Equipment Corporation enjoyed a partnership of over 25 years. The companies are parting ways on amiable terms. “The professionals at Tyler Equipment have been exceptional brand ambassadors for Bandit,” said Bandit Industries President Jerry Morey. “We shared a strong business relationship and a strong friendship, and that friendship endures. We thank them for their devoted service and wish them nothing but the best for the future.” Bobcat of Connecticut specializes in Bandit hand-fed chippers and stump grinders and will serve Bandit customers from four locations: Bobcat of Connecticut in Hartford, Bobcat of Stratford in Stratford, Bobcat of Greater Springfield and Bobcat of Rhode Island in Warwick. “Bobcat of Connecticut is already a wellestablished Bandit dealer; they share our passion and pride for the Bandit brand,” said Morey. “We are confident that Bandit 38 n
Bandit Industries
Reached a Settlement Jerry Morey President, Bandit Industries Inc.
B
andit Industries Inc. has reached a settlement with the United States Environmental Protection Agency regarding civil penalties for alleged violations of the Transition Program for Equipment Manufacturers (TPEM) under the Federal Clean Air Act. The settlement follows Bandit’s voluntary self-disclosure to the EPA after Bandit discovered one of its suppliers of engines shipped to Bandit from 2012 to 2015 approximately 2,300 diesel engines that Bandit understood to be legally conforming engines. Discussions with the government have been ongoing since February, 2015. In November 2016, EPA and Bandit were able to reach an agreement to resolve the government’s allegations. Bandit does not admit liability and Bandit expressly denies any intentional or deliberate TPEM noncompliance in the agreement. The settlement will not affect Bandit’s ability to continue to operate or supply quality products and service to its customers. Bandit has not had any previous clean air violations and has put in measures to ensure all engines installed on their equipment comply with the Federal Clean Air Act.
The Original Lumberman’s Exchange
Register for
SLMA/SFPA Spring Meeting
M
ake plans today to attend the 2017 SLMA/SFPA Spring Meeting & Expo, to be held March 8-10 at the Monteleone Hotel in New Orleans. The agenda includes meetings of SLMA and SFPA Boards of Directors, plus international updates from our team of consultants and industry updates on Friday. During this event, a Trade Expo will be held. SFPA and SLMA member suppliers to the forest products industry can reserve a tabletop exhibit space during the meeting, which will offer a preview of Expo 2017, showcasing the latest products, equipment and services. Interested SFPA and SLMA members can review the registration form for details and additional sponsorship opportunities. The Monteleone Hotel is located on Royal Street in the heart of French Quarter. A block of rooms is reserved for those attending this meeting, at the special nightly rate of $199 plus taxes. To make your reservation, call 504/523-3341 and mention SFPA. The hotel cutoff date is February 15. “This is a great opportunity to network with industry representatives, receive updates both domestically and internationally and meet the consultants face-to-face, as well as visit with exhibitors,” noted SFPA’s Executive Director Tami Kessler. “All members are invited to attend,” she added. As the meeting dates draw near, more agenda details will be provided. For questions about the 2017 SLMA/SFPA Spring Meeting & Expo, e-mail Tami at tkessler@sfpa.org, or call her at 504/4434464, option 4.
Visit us online at www.LBXonline.com!
Timberjack 230D Item ID: 13903 Contact: Sam Ph: 800-315-9950 x603
‘13 CAT 535C
Item ID: 13868 Contact: Sam Ph: 800-315-9950 x603
Mag 64-knive Source Grinder
Item ID: 14007 Contact: Austin Ph: 800-315-9950 x606
2008 Dynamic 585 Chipper Item ID: 13882 Contact: Austin Ph: 800-315-9950 x606
‘98 611 ExHydro Ax Item ID: 13948 Contact: Austin Ph: 800.315.9950 x606 has been replaced, it comes with 5
extra blaeds, 4 extra Belts, 3 phase Air Compressor and a saw sharpener.
Mill is in Excellent condition! Reason
‘89 John Deere 650G
Item ID: 13863 Contact: Sam Ph: 800-315-9950 x603
for selling: Sawmill is too Big for
manual setwork, and dogs. 48’ track
x600
edger- 1 fixed blade/2 movable,
what we need. Item ID 13642. Chris 04’ Woodmizer LT 70 Hydraulic - Only 1100 hours on this mill, it
has a Cat diesel turbo engine, laser
sight, debarker, accuset 2 setworks, and extra blades to go with it. Also
includes a Bearing roller table. Mill is in excellent condition. Item ID 13940. Austin x606
1984 Lane Model 8400 Saw Mill -
Heavy duty four 14’ (4) head table w/ a top saw. Silvatech Set works and has 45-50 foot of track frame.
Surprisingly good condition! Great Value at this price!!. Item ID 12689. Sam x603
1996 Woodmizer Portable Sawmill - Mill model LT40HDD40. Hour
meter reads 4,393 hrs. 4 cyl; 40 HP
Lombardini engine; Complete rebuilt at 4,000 hours. Also has debarker
and ride along seat. Mill in excellent working condition. Item ID 13457. Sam x603
2001’ Frick Timber Tiger Sawmill -
Portable on single axle, 14’ carriage/
all steel. 4 Head blocks with 3 tapers,
‘83 Franklin 170 Cable Skidder Item ID: 13996 Contact: Austin Ph: 800-315-9950 x606
broke into 3 sections. Miner 3 blade
2006 LT40 Sawmill - Remote 51hp
will cut 4” thick cant. The edger is
Loader, debarker, with trailera
mounted over the mandrel. The
mill and edger were designed to be operated by the same person. Mill and edger run off of a single 471
Detroit Power unit, the power unit
has its own axle. Comes with Mellott Log turner, 3 strand log deck, and a
sawdust conveyer under the saw. The mill is set up and in production. Also available is a Case 580B Loader with forks & Bucket, that can be included for 6K. Item ID 13914. Austin x606 2006 B1600 Brewco Grade resaw - This is a stationary band resaw system. It includes infeed with hydraulic hold down, outfeed
rollcase with board separator system, lumber transfer, complete runaround
system. Mill is capable of cutting 16 X 16 X 18 cants. Has all new height and width detectors and new feed chain. Cuts with a 2” bandsaw and comes
with approximately 25 extra bands.
Comes with a 4 X 4 operators cab and controls. Item ID 13862. Sam x603
‘06 Woodmizer LT300 Item ID: 13892 Contact: Austin Ph: 800.315.9950 x606
Caterpillar engine with 7500 hours.
is powered by a 150 horsepower
package. Item ID 13664. Sam x603
sawdust chains. Item ID 13607. Chris
Cleereman model 40- 3 knee - Right hand Includes track and controls.
Electric over air setworks. Item ID 13240. Chris x600
Frick Sawmill - 2000, Frick 48” blade,
all metal, rails and bunk. 250 TURBO Cummins Engine. All in Great
Shape!! Item ID 13418. Sam x603
Frick Sawmill - Everything on the
mill seems to work fine. Has belts,
teeth, and blade with it. Power unit is 230 Cummins. All it needs is a starter and radiator. Item ID 13904. Austin x606
Frick Sawmill with a 3 head block
motor. Both the mill and edger have x600
Newman Shavings mill - 01044
Single box machine. Item ID 13377. Sam x603
Wood-mizer Bandmill Sawmill -
1991, LT40HD G24. Trailer mounted
bandmill can easily be moved and set up and cutting lumber in 30 minutes. Cut logs up to 21 feet long. Onan gas
24 hp engine, runs great. Bandmill has extremely low hours (1,235 hrs). In
wonderful condition. Easy to operate.
Always stored inside!!. Item ID 13456. Sam x603
SHAVING EQUIPMENT
carriage - Sawmill operation for
Jackson 30Q4H Quad Shaving Mill -
powered. Frick Sawmill with a 3
back and forth. 52” box. Comes with
sale. The whole operation is electric head block carriage (has slide for a fourth), 54 inch head saw, almost
w/hydraulic system to drive the box conveyor. Item ID 13923. Austin x606
TRIMMERS
new (also have spare saws), Mellot 3
HMC Double End Trimmer - 6’-20’
saw 4 inch Minor edger. The edger
out feed roll case and cut-off waste
strand log deck, log turner, and two
has a 30 horsepower motor, the mill
For Classifieds Call Your LBX REP at 1-800-315-9950
complete unit, 2 saw unstacker,
conveyor. Item ID 13453. Sam x603
February 2017 n 39
The Lumberman’s Exchange Post Office Box 1916 Columbia, Tennessee 38402
PRSRT STD. U.S. Postage PAID Permit No. 212 Pulaski, TN
The proof is in the product Nothing beats the precision grinding and consistent uptime of a Rotochopper electric grinder. This unmatched grinding efficiency delivers a higher value end product, at a lower cost per ton or cubic yard. • Animal Bedding
• Boiler Fuel
• Colored Landscape Mulch
• Playground Cushion
Contact us today to learn how Rotochopper electric grinders can maximize the value of your raw materials.
320-548-3586 www.rotochopper.com
Follow Rotochopper on