March 2014
Since 1986 - The Original (800) 315-9950 or (615) 349-1890
Loggers • Sawmills • Pallet Manufacturers • Wood Recycling Equipment
DealS of the Month '99 Daewoo 220 Solar II
BLA 34427 Blade Coop Ads 8.5x11.indd 2
8/23/13 2:32
The Wood-Mizer quality you love. The convenience you need. Reduced! Item ID: 12936 Contact: Chris ext. 600
‘01 Timbco 820D Forwarder
Blades by Wood-Mizer
• • • •
TOP QUALITY
• • • •
TOP QUALITY
the SHARPEST TIP POSSIBLE Profile ground technology: Consistent grind Computerized set for accuracy Quality cut and high feed rates
Price Reduced! Item ID: 13094 Contact: Tom ext. 604
'04 JD 700H LGP
Excellent Condition! Item ID: 13035 Contact: Chris ext. 600
For classifieds call (800) 315-9950 or (615) 349-1890 or
í
With your smart phone: Scan QR Code to visit—
www.LBXonline.com
Blades by Wood-Mizer
Wood-Mizer's leading coil stock dealer.
Quality cut and high feed rates Computerized set for accuracy Consistent grind Profile ground technology: the SHARPEST TIP POSSIBLE
Smith Sawmill Service Phone: 1-800-598-6344 Fax: 936-254-3975 E-Mail: sawsales@hughes.net
The Wood-Mizer quality you love. The convenience you need.
BLA 34427 Blade Coop Ads 8.5x11.indd 2
8/23/13 2:32
Tracy Gordon owner of Gordon LumTracy owner of Gordon LumberingGordon purchased a Log Max 7000XT. bering purchased Log Maxabout 7000XT. We asked Tracy hisathoughts We asked Tracy about his new Log Max:his “I thoughts am looking for
Tracy Gordon owner of Gordon Lum-
his new Log Max:that “I am looking for reason is one
savings and bering purchased a fuel Log Max 7000XT.
fuel is one We asked Tracy his thoughts about and that why savings I, absolutely, wanted a reason Log Max his new Log Max: “I am looking for why I, absolutely,
a Log Max head. I looked atwanted a Log Max 6000 head. I looked at a LogaMax but needed something little6000 bigger
fuel savings and that is one reason
why I, absolutely, wanted a Log Max
but needed little bigger head. I looked at a which Log Max is6000 why something I chose thea7000XT. This but needed something a little which is bigger why I
chose thefor 7000XT. head is a good match mixedThis and head a good match forarea. mixed and heavyishardwoods in our Every-
which is why I chose the 7000XT. This
head is a good match for mixed and
heavy hardwoods in our area. smoothly and I Everywas
hasEverygone heavy hardwoods inthing our area.
W
thing has gone thing has gone smoothly and I well was treated by
smoothly and I was everyone involved.” Western Canada treated well by everyone involved.” Toll Free 1.800.666.4474 From right to left, Dane Caton, operator, Tracy Gordon, treated well by everyone involved.”
From right to left, Dane Caton, operator, Tracy Gordon, owner, and Baker, salesman, of Strong, From right to Gary left, Dane operator, Tracy Maine. Gordon, owner, and Gary Baker, salesman, ofCaton, Strong, Maine.
learn more To learn more aboutTo what Log Max owner,Scan and Gary Baker, salesman, of Strong, Maine. Scan this QR code withthis QR code with your smartphone your smartphone barcode reader Scan app to this QR code with barcode reader app to see a video on ayour Log smartphone see Max 7000XT Fixed a video on a Log barcode reader app to Head processing hard-7000XT Fixed Max see a processing video on a Log woods on a Timber Pro Head hard725 Track Machine Max 7000XT Fixed
woods on a Timber Pro Head processing hard725 Track Machine woods on a Timber Pro 725 Track Machine
USA
The Original Lumberman’s Exchange
P P
about what Log Max Ph. 360.699.7300 To learn more what Log Max can do for you contact your can dolocal for youabout contact your local Eastern Canada dealer today.
Ph.your 506.869.2325 can dotoday. for you contact local dealer dealer today. www.LogMax.com
www.LogMax.com 2 n
TollW Toll
E EP
P
www. www.
Visit us online at www.LBXonline.com!
PALLET STOCK, STUDS, I-JOISTS, STRUCTURAL COMPONENTS THE L-M SAWS, WILL TAKE YOU TO THE NEXT LEVEL! Leading the industry in bundle cross cut systems since 1957! New Design! New Technology!
Portable Yard Saw
Model 200MP-7-SS Gas Model 100MP-7-SS Electric 3 inch side shift, a standard feature
Traveling Arch Saw
Hydraulically controlled No manual cutting Our most popular turn key system
The New L-M “I-CUT” Bundle cross cut system!
* 60’ long frame to precision cut your I-Joists * Precision accuracy of +- 1/32” * Shorter system are available to process all your cutting needs * Tremendous labor savings, Guaranteed!
L-M Deck Cut Off Saw 3 foot to 12 foot bar lengths Hydraulically controlled
Automatic Strapping System Attach bottom crossers Side squeeze incorporated Polyester strap
Flush End Bump Rollcase
Reduce or eliminate your end trims
The Verticut P4 System now offers scan and cut technology, reducing operator error by using a bar code system!
Visit our web site www.LMSaws.com to see our complete product line and videos!
L-M Equipment Co. Ltd
Phone: 604-431-8800 Toll Free: 1-800-455-8807 Web Site: www.LMSaws.com E-Mail: Sales@LMSaws.com For Classifieds Call Your LBX REP at 1-800-315-9950
March 2014 n 3
Questions about Shaving Mills
has 50plus years of answers! The Original Patented Wood Shaving Mill … Since 1960!
• Several Models to choose from producing 7.4 Cubic Yards (5.7 Cubic Meters) to 50 Cubic Yards (38.2 Cubic Meters) • Utilize low-grade Logs & Slabs • Produce high-quality, fluffy shavings • Powered by Electric, Diesel or Tractor PTO • Complete wood shavings plant layout services available • Shavings Drying Systems
Wood Shaving Mill
We Have Dryers Available
Single or Twin-Box Machine?
What Our Customers Are Saying— ”Jackson has been around long enough so they’ve figured out what works and what doesn’t.”
“Jackson Wood Shaving Mills simply last longer. They’re rugged and dependable.”
“In volume tests on production, the Jackson Wood Shaving Mill was tops—and in day-in, day-out production, it’s still tops!”
“Our Jackson Shaving Mill was built in 1966 and is still going strong!”
“As our business has expanded, we’ve come back to Jackson for Shaving Mills again and again.”
“We like the low maintenance and availability of manufactured parts for our Jackson equipment.”
d
round the Wo dA l rl So
Manufacturers of — ✔ Shaving Mills ✔ Webb Solid-fuel Burners ✔ “Premier” Scragg Mills ✔ Stationary Sawmill Carriages
An dM
. S.A ade in the U.
✔ Feedworks, Decks, Turners ✔ Hydraulic, Electric and Electronic Setworks ✔ Vertical Edgers, Horizontal Edgers ✔ “Lumber Harvester” Portable Sawmills
4 n
We offer both. Phone us for details.
The Original Lumberman’s Exchange
Company, Inc. 830 N. State Road 37, Mondovi, Wisconsin 54755 USA
Website: www.JacksonLbrHarvester.com
Phone: (715) 926-3816 Fax: (715) 926-4545
Visit us online at www.LBXonline.com!
The
Original
Lumberman’s Exchange
** Auctions **
JM Wood Auction Co., Inc. — Page 7
www.jmwood.com
41
st
Your #1 Source for Forest Industry Products!
Montgomery, Alabama
Northeastern Forest Products Equipment EXPO Coming May 9–10, 2014 Essex Junction, Vermont
Publisher Woods Publishing
Contact Information: http://nefpexpo.net Registration available after March 1
Advertising Sales Morris Woods (615) 349-1890 morris@LBXonline.com
Equipment Reps Equipment Representative Tom Hirt (800) 315-9950 x604 Equipment Representative James Keaton Woods (800) 315-9950 x603 Equipment Representative Richard Arnold (800) 315-9950 x606 Mailing Address P.O. Box 1916 Columbia, TN 38402-1916 (615) 349-1890 Phone (931) 233-0802 Fax Ad Submissions May be sent to— LBXonline@comcast.net Postmaster Send address changes to: Lumberman’s Exchange P.O. Box 1916 Columbia, TN 38402 The Original Lumberman’s Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers the Lumberman’s Exchange, its principles and associates are not held liable for errors or omissions. Reproduction in whole or part prohibited with-out written consent. ©2014 by Woods Publishing.
BAGGER Real Tuff Baler, Forage box & Conveyor - 2011 Real Tuff Baler
** Calendar **
The Lumberman’s Exchange is published monthly and is circulated internationally to sawmills, loggers, pallet makers, recyclers and industrial woodworking plants.
Design Director Heninger & Associates lbxonline@comcast.net
Annual Forestry Auction! March 11–13, 2014
For Classifieds Call 800.315.9950 See pictures, prices, and Location of all equipment at www.LBXonline.com
powered by a 36-hp Yenmar with conveyor. Up to 60 square bales an hour! Is in mint condition! - Item ID-12795 - Chris 800-3159950 x600
BLOWERS
Phelps Dust blower - Item ID12588 - Richard 800-315-9950 x606
CARRIAGES & DRIVES
Manual Four Head Block -
The Richmond Show EXPO RICHMOND 2014
Richmond Raceway Complex * Richmond, Virginia Friday May 16th 9:00a.m. until 5:00p.m. and Saturday May 17, 2014 9:00a.m. until 3:00p.m. The 34th East Coast Sawmill and Logging Equipment Exposition
See page 36 for details
** INFO LINK **
ACE Enterprises........................ 17
purchasing decisions to improve the efficiency - and profitability - of your operation. Don’t miss this opportunity to invest in your future. Please fill out and return the pre-registration form below to the exposition office by April 1, 2014. Confirmations will be mailed to all pre-registered individuals no later than May 4, 2014. There is no charge to attend the exposition if you pre-register; there will be a $10.00 charge for those who register on-site. For further information, please call (804) 737-5625.
AJD Forest Products................. 29
LBX Financing............................ 25
will be 2014’s largest collection of sawmill, logging, biomass, pallet and related manufacturing equipment, supplies and services in the Eastern United States. Nearly 300 exhibiting companies and thousands of forest products industry people will convene for the 34th Richmond Show. The newest and most advanced machinery, equipment and technology in the industry will be on display. There will be acres of active hands-on machinery and equipment demonstrations outside, plus hundreds of indoor displays of new products, methods, technology and trends. Examine and compare products or services before making your
Co-sponsored by Virginia Polytechnic Institute & State University Cooperative Extension and Virginia Forest Products Association
by April 1, 2014 to: EXPO RICHMOND P. O. Box 160 • Sandston, VA 23150-0160 B & B Return Mfg................................... 202014 •LM Equipment, Canada.............. 3 Please fill out completely and legibly. Incomplete or illegible forms can not be processed. Only industry personnel should complete this form. Please copy this form for additional registrants. Spouses and children under 18 will receive passes at the entrance gate which will allow them to enter the exposition free of charge.
B. H. Payne................................. 24
LogMax......................................... 2 Nickname:
Baker...................................... 9, 22 Company:
M&FTitle: Gauge................................. 34
Bartlett Saw Service................. 37
Menominee Saw........................ 35
Address:
City:
State:
ZIP:
Blockbuster (See in Vermont).39 FAX: Metal Detector's Inc.................. 27
Telephone: E-mail:
Husk. Manual Pulleys on Bearing . Parts Book and where to order included. - Item ID-12846 - Tom 800-315-9950 x604
CHIPPERS
Precision 58 Chip Pac - single chute loading system, - Item ID-12764 - Richard 800-315-9950 x606
We have Money Available for Loggers and Sawmills!
King Bros Transport................. 18
Amark......................................... 10 Lignomat.................................... 31 E X P O RICHMOND 2014
Your Name:
Mounted on all steel carriage.
Foundation Capital specializes in providing working capital in amounts from $10,000 to $100,000. •
Country (if not USA):
Buck Equipment (AIM) . .......... 16 Midwest Sharpening Service... 33 PLEASE CHECK ALL CLASSIFICATIONS OF INTEREST: -- (You must check at least one)
G Sawmilling G Logging G Pallet Production/Recycling G Equipment Manufacturer G Plywood/Panel
Built-Rite.................................... 12
G Dealer Sales
G Paper/Pulp
Multitek...................................... 19 G Other (Please Specify) :
Pre-registration allows entrance to the Exposition (May 16 - 17, 2014, 9am-5pm) at no charge. On-site registration is $10.00. Exhibitors: Please do not use this form. Contact show office for exhibitor registration information. Additional information is available on the Internet at www.exporichmond.com
Cleereman.................................. 15
Piper’s Saw Shop....................... 14
Concept Products..................... 23 Educational Course
Precision Sharpening............... 20
Connecticut Boot........................ 6
Press Releases........................ 38
Cord Master................................. 8
Renno Bros. Lumber................. 18
Corley Mfg.................................. 34
Resource Recovery................... 26
CRD Metalworks........................ 11
Richmond EXPO........................ 38
CW Mill....................................... 13
Rotochopper............................. 40
Frey Lumber Co........................... 7
Row Electric.............................. 22
Graf Bros. Flooring...................... 9
Sawmill Exchange..................... 27
Jackson Lumber.......................... 4
Sering Sawmill........................... 17
JM Wood Auction..................... 7
Smith's Sawmill Service........... 1
Kasco-SharpTech...................... 18
Weaver Electric......................... 32
Kilgore Saw................................ 28
Wood-Mizer................................ 21
Thursday, May 15, 2014 Two half-day workshops will be held on Thursday, May 15, 2014 on “Improving The Quality of Lumber Drying” and “Financial Management for Forest Products Business” at the Four Points by Sheraton. Lumber drying operations, no matter the size, must provide a good quality product to maintain their customer base. Drying defects not only lead to product value losses but if passed onto the customer can lead to lost sales. The morning workshop is designed to assist anyone drying lumber from the small-scale lumber dryer to commercial drying operations. The techniques and information presented are relevant to both hardwood and softwood lumber drying operations. A good understanding of financial management is critical to manage and control the business. During the afternoon session, participants will start with a business simulation that will help you to understand financial statements including specific terminology. Participants will also learn to analyze financial statements uncovering current problems or discovering potential business opportunities. For registration information ONLY FOR THE SEMINAR, contact Angie Riegel at the Department of Wood Science and Forest Products at Virginia Tech; Telephone: (540) 231-7107; fax: (540) 231-8868; e-mail: ariegel@vt.edu Note: Angie Riegel provides registration information ONLY for the seminar - NOT for the exposition. You must register for the each event separately.
For Classifieds Call Your LBX REP at 1-800-315-9950
• •
Get that new piece of equipment Expand Your Operations Hire Much Needed Employee’s
We have a “no red tape” 24hour approval process that allows us to provide access to funds in less than 5 days. Regardless of your financial position FCP can deliver! We specialize in hard cases!
Call Kenny 801.419.9498 March 2014 n 5
Zip
❑ Please Remove
State
❑ Please Change
free equipment listings! Call – (800) 315-9950
'04 JD 700H LGP
Best Prices in the USA
Call with model number, size, and width for a FREE Price Quote!
(888) 438-5411 COMPLETE SAWMILLS Complete 3 head block Helle Sawmill - 100hp electric
City
Generator set, Two stand
Excellent Condition! Item ID: 13035 Contact: Chris ext. 600
‘10 Valmet/ Timbco 445FXL w/22" Sawhead
Cedar Creek Vertical Edger, complete cost $12000. Palllet Board resaw system, 2 roto phase Go Fast Deduster 2 head Go Fast Resaw with complete automatic run around system. Omen Cummings Generator New Table, Manual Chop saw, rotating board stacker, all under roof. Excellent Condition. Thomas Ind. Computer Set Works Cost $10000. Saw Dust Conveyer, saw
Phone
✁
P.O. Box 1916 Columbia, TN 38402
*Company name and address required to process your change.
Address
Individual Name
automatic Log Deck, 3 saw
Condition, Green Chain Round
Chris Woods, Owner Phone: 800-315-9950 Ext. 600
The Original Lumberman’s Exchange
Company Name*
❑ Please Add
Call us today for all your used equipment needs!
DealS for the Month -February-
Workboots
motor, run by Omen Cummins
If you need to Change your Address or Add Your Name to our mailing list, then please complete this form and mail to: 6 n
Equipment Representatives
dust box, 2- 56 inch inserted
Best Price on Market! Item ID: 13023 Contact: Tom ext. 604
'99 Daewoo 220 Solar II
Tooth Saws, 2 Roto Phases, 3 Phase 480 Electric Boxes complete cost over $10,000. Will include 20’ of 2 strand kant Green Chain. - Item ID-13122 Tom 800-315-9950 x604 Forest-All Sawmill, circle saw - Item ID-12762 - Richard 800-315-
Tom Hirt Phone: 800-315-9950 Ext. 604
9950 x606 Sanborn 636 - 1993 Sanborn Min Max 636. 50-hp. It also has a
Reduced! Item ID: 12936 Contact: Chris ext. 600
For classifieds call (800) 315-9950 or (615) 349-1890 or
í
James Keaton Woods Phone: 800-315-9950 Ext. 606
The Original Lumberman’s Exchange
With your smart phone: Scan QR Code to visit—
www.LBXonline.com
remote air conditioned operator booth - Item ID-12761 - Richard 800-315-9950 x606
FIREWOOD PROCESSORS
Best Value Portable Log Splitter - Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA - Item
Visit us online at www.LBXonline.com!
2013 Deere 648H Dual Arch, 1900 hrs.
(3) CAT 525C
Prentice 2670
2011 Deere 843K
ID-12062 - Tom 800-315-9950 x604
tilt and side shift. Very nice
Chomper Firewood Processor
condition. Priced to sell. - Item
- 60HP John Deere engine.
ID-12547 - Tom 800-315-9950 x604
Two chain hydraulic powered
Hyster 70 XL2 Forklift - Propane,
conveyor. Very good running
2199 hours - Item ID-12607 -
condition. Can produce up to 2
Richard 800-315-9950 x606
cords/hour according to owner.
Late 80’s Case W20C Wheel
Priced to sell. - Item ID-12792 -
loader - Item ID-12606 - Richard
Tom 800-315-9950 x604
800-315-9950 x606
Custom Firewood Processor -
HAMMER MILL
Easily cuts 3+ chord an hour.
2004 Williams C-32 - 100 hp
Fold in deck, conveyer on
Siemens motor : 32”x 20’ infeed
wheels, 24” capacity!! Very clean
conveyer : 32”x20 discharge
running machine. - Item ID-13108
conveyer, new belt, magnet
- Richard 800-315-9950 x606
head pulley : Vertical infeed
FORKLIFTS
hopper : Uses 22 heavy duty cast
(7) 2013 Mack CHU613, Co. Owned East Live Bottoms
2011 Deere 643K Tigercat 822
Another satisfied customer KMC Model 2500P Remanufactured by KMC in 2011, dual arch grapple track skidder, torsion bar suspension, John Deere winch model 4000, Cummins engine model 6BTA, Clark’s transmission 28000. Asking(OBO)........ $200,000
Contact Jim Frey
724.564.1820
Rick Mayer of Northern Wood Products, IN says:
Working with Chris and The Lumberman's Exchange was a great experience. I will definitely recommend him to anyone buying used equipment and will buy from them again!
2003 Manitou 523 - 2003 Manitou
hammers : Air pan discharge
completely refurbished - Item
523, 1532 hours, 23ft reach, A/C,
to 15” diameter opening : 20
ID-13106 - Richard 800-315-9950
Grapple Bucket - Item ID-12604 -
hp Siemans blower ( set up to
x606
Richard 800-315-9950 x606
blow directly into a truck or
2006 Taylor T-160 Articulated
stock pile) Last used running
Falcon Wood Hog Grinder -
Fork Truck - 2700 Hours. 16,000
wood cut-offs in 2x4, 2x6, 2x8,
36x60, powered by a 3406 Cat.
lb capacity. S/N S-A1-17076.
4x4 Rated @ approximately
- Item ID-12920 - Richard 800-315-
Articulated 4-Wheel Drive.
4,000-14,000 pounds per hour
9950 x606
Detroit 4-71 engine. 17.5 x 25
depending on screen size
Jeffrey Hammer Hog, 200-hp
West Salem Grinder and Gen Set
Tires at 60%. Enclosed Cab.
Comes with control panels
grinder. - Item ID-12925 - Richard
- Model WSM 2822, With a Cutler
Two Stage Mast with Hydraulic
and soft starters This unit was
800-315-9950 x606
Hammer Soft start. There is also
HOGS/WOODGRINDERS
For Classifieds Call Your LBX REP at 1-800-315-9950
March 2014 n 7
n uctio e d o r anc est P High t Mainten !! s d! Lowe rantee Gua
Trailer:
Tandem axle, 8’6” wide, 22’-30’ long, 11’8” high, 5-7 tons, Electric brakes.
Saw:
Superior Carbide Slasher - Cut wood instead of sharpen chains 36” to 60” diameter, 2 ga Carbide Slasher.
Engine:
50 to170 HP or PTO Drive with user’s tractor.
Hydraulics:
Commercial Shearing
Splitter:
35 - 72 tons, 3-5 second cycle time; 2, 4, 6, 8, 10, 12, 14 & 21 way pkg wedge. Capacity - 4” to 27” Log diameter 0” to 48” Block Length Lifetime warranty on the entire splitter chamber.
Infeed Conveyor:
16” - 30” long Hydraulic powered.
Clean out Hopper: Get rid of bark and wood slivers before being conveyed away.
New Grapple System Now Available!
2040 Rogers Road, Perth, O n ta r i o K 7 H 1 P 9 Canada
www.cord-master.com Email: cordking@cord-master.com
Today!
888-219-9663 8 n
The Original Lumberman’s Exchange
Visit us online at www.LBXonline.com!
a full set of extra hammers that go with it plus one original from factory to use as a pattern when rebuilding the others with hard surfacing. The gen set is a 360 KW with a Big Cam 855 Cummins engine. Extremely low 670 Hours. Owner is negotiable. - Item ID12386 - Richard 800-315-9950 x606
Logging Equipment
1976 Clark 664 Cable Skidder Approximately 7500 hours. S/N 514F-2341-CAC. Strong Clark
‘94 Prentice 180D Log Loader Item ID: 12759 Contact: Richard 800.315.9950 x606 www.LBXonline.com
‘99 Daewoo 220 Solar II
11000 hours, has heat and air! Daewoo inline 6 Engine 145hp. Computer works for the stroker. Tracks are around 11’. Stroke delimber is a Pro mark 50. Designed under the timberline, and has a timberline head. Has all maintenance records and extra parts! Great running machine! Location: Montana
‘01 Rotochopper SBE125
Item ID: 12936 Contact: Chris Woods 800.315.9950 Ext. 600
Call Graf Brothers Flooring, Inc. (606) 932-3117
18-tooth Horizontal Grinder, 150hp Weg motor (conveyor not included)........ $30000
Winch; Tire chains; Pulls good.
Item ID-12325 - Tom 800-315-9950
Front tires at 70%. Rears at 30%.
x604
Detroit 3-53 runs well. Center
1978 FMC Model 220 Track
pin tight. Slight play in steering
Skidder - Estimated 1978 Model
pin. Straight metal. Weighs about
220 FMC Tracked Skidder.
1979 Timberjack 230 Forwarder
18,000 lbs. Can haul on 10 ton
Engine and transmission have
- Good running forwarder with
trailer. - Item ID-12249 - Tom 800-
very few hours since they were
80% rubber. Open cab. Detroit
500 hours on completely rebuilt
315-9950 x604
reconditioned. Owner reports
engine. Simple but hard working
CAT 3304 engine; New clutch;
1978 Clark 666 Grapple Skidder
that about half the tracks need
machine. Very clean for its’ age.
New hydraulic hoses; New
- Strong skidder. Esco 26 grapple
to be re-pinned and bushed, and
Hard to find. - Item ID-13057 -
radiator; New 100’ main line;
with winch. 28L x 26 tires at 60%.
sprockets and torsion bar need
Tom 800-315-9950 x604
Transmission completely rebuilt
Open ROPS cab. Stick Steering.
to be replaced. - Item ID-13126 -
1979 Timberjack 240-D Cable
with zero hours; 23.1.26 forestry
Detroit 4-53 engine. Runs good. -
Tom 800-315-9950 x604
Skidder - Serial No: 94050311575.
tires. - Item ID-13137 - Tom 800-
www.LBXonline.com
For Classifieds Call Your LBX REP at 1-800-315-9950
www.grafbro.com
March 2014 n 9
Now Accepting Visa & Mastercard
Save Your Stubs & Pieces!
➨
Let us reprocess them $30 per 100 Now have Factory Seconds $27 per 100 sticks
REduced
x606 1987 Cat D4H Grapple Dozer Good running Hi Track dozer with 6500 hours and wide flotation tracks. Esco grapple with 84” opening. Winch. 6 way
‘99 Timbco 425 Valmet 500 Harvester Item ID: 13140 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com
‘04 Franklin Q80 Single Arch Grapple Skidder w/Winch
Item ID: 12843 Contact: Chris Woods 800.315.9950 Ext. 600
blade works well. Just replaced
‘02 Timberjack 608S w/Hot Saw Item ID: 12194 Contact: Richard 800.315.9950 x606 www.LBXonline.com
www.LBXonline.com
rear idler. Hard to find machine. Real work horse! - Item ID-12623 Tom 800-315-9950 x604 1987 Franklin Swamp Cable Skidder - SR# 13280; Purchased New in April 25, 1987; Hour Meter 8200hrs. Detroit 4-53 Engine: 67x34.00x26 Tires (60% Rubber); Needs Seat, Starter,
percent; 72" Esco grapple;
Batters, Top Drive Line Repaired,
1981 Hydro Ax 411B w/Koehring
Runs well; Some slack in blade;
and two Side Covers. Includes
315-9950 x604
16” Hot Saw - Strong Cummins
Everything works. - Item ID-
parts manual. - Item ID-12847 -
1981 Dresser 510B - Dresser
6BT 150HP engine with no
13149 - Tom 800-315-9950 x604
Tom 800-315-9950 x604
510B Pay Loader, meter shows
blow by. 23.1 x 26 tires at 75%.
1983 Caterpillar 988B Loader
1987 Morbark 27 WCL NEEDS
8571 hours. Had a new Komatsu
Koehring Hot Saw has fresh
with very low hours - Hours
MOTOR - 1987 Morbark 27 WCL,
engine installed 3000 hours ago.
teeth and runs well. Very nice
5228, Caterpillar 3408T Engine,
Morbark 1000 Knuckle boom
Starts and runs great, tires are
machine for the price. - Item ID-
s/n# 50W06423 T246 988B, It has
loader, 3 knife disc, Newer
85%. Comes with forks, owner
12538 - Tom 800-315-9950 x604
a Rayco Bucket that is 11’6” wide
discharge chute, New banding
also has bucket. - Item ID-12359 -
1981 JD 850 Grapple Dozer
x 5’ tall (8 yard bucket). - Item
around disc, Brakes and tires are
Richard 800-315-9950 x606
- 10,400 hours. Tracks @ 50
ID-12375 - Richard 800-315-9950
also OK, Everything works well
10 n
The Original Lumberman’s Exchange
Visit us online at www.LBXonline.com!
There's Only One Way to Make Money in the Firewood Business…Production!
There’s Only One Way to Make Money in the Our Vision for Your Success is 20/20 Firewood Business…. Production! The Results are in YOur from the Great Firewood Shootout… Our VisiOn FOr success is 20/20
Our Rapido Loco and shootout... Woodbine Pro 20 The results Are in From the Great 20 Firewood Our rapidoDominated Loco 20 and Woodbine Pro 20Competition! DOMinATeD The cOMPeTiTiOn! the de A Ma e US th in
Woodbine Rapido Loco 20 Features Woodbine Rapido Loco 20 - 50” Simonds Circular Slasher Blade Features: - 73 HP Deutz Diesel • 50" Simonds Slasher - Tandem Axle DOTCircular Approved TrailerBlade • 73 HP Deutz Diesel - 24’ Conveyor STANDARD • Tandem Axle DOT Approved Trailer - 13’ Powered Infeed STANDARD • 24' Conveyor Standard - 8• Way Splitting Wedge 13' Powered Infeed Standard - 20” Log Diameter • 8-way SplittingCapacity Wedge - Push-Button Splitting • 20" Log DiameterSystem Capacity • Push-button Splitting System
At $54,900 Ready To Produce, At this is$54,900 the Fastest Ready to Produce, this is Production Firewood The Fastest Production Processor in North Firewood Processor in America.* North America.*
Woodbine Pro 20 Woodbine Pro 20 Features
- Oregon .404 Harvester components Features: - Tandem Axle DOT Approved Trailer • Oregon .404 Harvester Components - UpgRADeD 60 HP Deutz Diesel for more power! • Tandem Axle DOT Approved Trailer - 24’ Conveyor STANDARD • Upgraded 60 HP Deutz Diesel for More Power! At $44,900 the - 13’ Powered Infeed STANDARD • 24' Conveyor Standard Woodbind Pro 20 leads 13' Powered Infeed Standard - 8• Way Splitting Wedge At $44,900 its class in PRICE, • 8-Way SplittingCapacity Wedge - 20” Log Diameter the Woodbine Pro 20 PRODUCTIVITY and • 20" Log Diameter Capacity leads its class in Price, - Push-Button Splitting System PROFITABILITY* • Push-button System Productivity and - Our Most PopularSplitting Chain Saw Machine • Our Most Popular Chain Saw Machine Profitability*
remember HindsigHt is 20/20
Remember: Hindsight is 20/20
sO BeFOre YOu BuY cOMPAre eiTher OF The Soseries Before You Buy, compare either of the 20 PrOcessOrs FrOM crD MeTALWOrks TO AnYProcessors BrAnD - AnY siZe - AnYWhere. 20 Series from CRD Metalworks to Any Brand, Any Size, Anywhere check them out at the
*As Seen In Sawmill & Woodlot Magazine
Family Owned – Family Operated – Factory Direct
Family Owned—Family Operated—Factory Direct
Call 888-667-8580
Sawmill & Woodlot www.crdmetalworks.com
For Classifieds Call Your LBX REP at 1-800-315-9950
*As seen in
magazine.
March 2014 n 11
REduced
John Deere 548G Skidder is in great working condition and working daily Motor recently rebuilt with approx 200 hours. • Has new hydaulic pump • New turbo • Rear end recently gone through • Grapple cylinders recently packed • New glass • New rear tires • Good winch • Heat/ac works • Everything works except radio
Item ID: 12864 Contact: Chris Woods 800.315.9950 Ext. 600
www.LBXonline.com
‘79 Timberjack 240D Cable Skidder Inexpensive!
Newer clutch -- with outboard
- Original owner; Hour meter
- 640D turbo with EZ Grapple.
Item ID: 13137 Contact: Tom Ph: 800-315-9950 x604
bearing, Had Cummins KTTA
shows 5800 hours. Serial
Serial Number W640DC507211
www.LBXonline.com
750 HP engine -- needs repower
number: 554925. 23.1X26:
28L-26 tires 3@35% 1@85%. Runs
- Item ID-12443 - Richard 800-315-
Tires; 20% Remaining tread.
good. Needs seat recovered and
1990 Bell Super T Feller Buncher
9950 x606
New(not rebuilt) John Deere
front U-Joint. Priced to sell! -
- Totally rebuilt by owner.
1989 Ford L-9000 w 2005 Prentice
engine w/900 hours. No smoke
Item ID-12676 - Tom 800-315-9950
Rebuilt Deutz engine; Rebuilt
120E - Very clean Ford L-9000
or noise. Runs strong. On one
x604
Wheel Motor; Standard controls
Loader Truck with newer 2005
of the coldest days of the year,
1989 Timberjack 380 Grapple
have all new seals in valves and
Prentice 120E loader with 25’
the tractor started with only 1
Skidder - Serial# 385267. Almost
new levers: Comes with both 30”
extend-a-boom. Has new battery;
turn of the switch Sheet metal
new grapple. Engine has been
bar dangle head and 15” shear
350 HP Cummins engine with
is very good. Pins and bushings
replaced. Transmission just
head. 23” Tires. Serial Number:
only 250,000 miles; 3 stage Jake;
average to good condition. Good
rebuilt. 28L tires. Center pins
BCH-3585 - Item ID-12710 - Tom
New Tires!; New seals; Just had
dozer blade with good pins and
and bushings show medium
800-315-9950 x604
brakes done. - Item ID-12736 -
bushings. - Item ID-13146 - Tom
wear. Good for a year moving 2-3
1991 Barko 160 Articulated
Tom 800-315-9950 x604
800-315-9950 x604
loads per day. - Item ID-13143 -
Carrier - Good running machine
1989 JD 540-D Cable Skidder
1989 JD 640D Grapple Skidder
Tom 800-315-9950 x604
with about 9,000 hours. Mounted
12 n
The Original Lumberman’s Exchange
Visit us online at www.LBXonline.com!
For Classifieds Call Your LBX REP at 1-800-315-9950
March 2014 n 13
‘84 Eager Beaver Trailer
PIPER’S Saw Shop
9’ wide x 48’ long, detached front, middle drop 26 ft., tires and brakes 80%, Excellent Condition!
Item ID: 12843 Contact: Chris Woods 800.315.9950 Ext. 600
5 7 0 6 • 5 4 8 • 800
www.LBXonline.com
Promotional Pricing Offer
Simonds Red Streak Hard Back 1-1/4” x .042 x 3/4” or 7/8” Length 13’2”
$14.71 $14.27 each Tell us you saw it here!
L im it e d T im e O n ly
‘95 CAT 518C Grapple Skidder Item ID: 12302 Contact: Richard 800.315.9950 x606 www.LBXonline.com
‘92 Hood 24000 Slasher on Carrier Really nice package! Item ID: 13142 Contact: Tom 800.315.9950 Ext. 604
on Rough Terrain 4 wheel drive
1FDYW82A8NVA07578, TK
cracks; Runs like a charm; Spare
carrier that can pull a trailer and
Body Style, 307,000 miles, 225
saw - Item ID-13142 - Tom 800-
work in sloppy conditions. Great
hp, 7 speed Transmission, a/c,
315-9950 x604
value for a loader on a carrier
410 gear ratio, hendrickson
1993 Hydro Ax 311 FB w/2 Heads
Branton Winch, Push Blade,
like this! - Item ID-12931 - Tom
suspension 1986 Series XL235E
- Estimated year of 1993. This
4X4, Firestone 67X34.00/26
800-315-9950 x604
Log Loader, new complete
Hydro Ax 311 comes with a bar
tires @ 90%, Counter Weight, 6
1991 Franklin Swamp Cable
engine, 116 hp, 42” Log Grapple,
saw head and a 18” Shear Head.
cylinder Cummins Diesel Engine.
Skidder - SR#14372. Hour Meter:
Owner is open to offers - Item
Unit has new John Deere engine.
FOB:Okeechobee, FL - Item ID-
9515hrs. Detroit 4-53 Engine:
ID-12025 - Richard 800-315-9950
23.1 x 26 tires at 85%. Runs good.
13090 - Tom 800-315-9950 x604
67x3400x26 Tires (70% Rubber);
x606
Only 1554 hours. All manuals
1994 Barko 275B Stationary
Running and Ready to Work. -
1992 Hood 24000 Slasher on
included. Fantastic value! - Item
Loader - Includes Mounting
Item ID-12848 - Tom 800-315-9950
Carrier - 1992 Hood 24000 Loader
ID-12990 - Tom 800-315-9950 x604
platform and 75HP electric
x604
with circle saw slasher mounted
1993 Timberjack 380B PG Highlift
motor. Very few hours as this
1992 Ford L8000 with a 1986
on self propelled carrier. New
Tree Trimmer, s/n CM4478, 5,152
machine was taken down shortly
Series XL235E Log Loader
John Deere 6414 Engine; All
hours, Delivered New in 1995,
after purchase and was never
- 1992 Ford L8000, Serial #
pumps completely rebuilt; No
Cab with A/C, 5 blades, 75 reach,
used again. Has been sitting
14 n
The Original Lumberman’s Exchange
www.LBXonline.com
Visit us online at www.LBXonline.com!
CLEEREMAN SAwMiLL MAChiNERy Your Most Profitable Sawmill Investment.
Why has Cleereman Sold Over 990 1000Carriages? Carriages? The answer is Simple...
CLEEREMAN
QUalITY & SerVICe!
Not just Carriages! • Carriage Drives Hydrostatic & Electric • Bar Type Log Turners 2500 – 3500 lbs. • airBag & HyDrauLiC CaBLe Tensioners • sawyers CaBs & ConTroL CaBs • CusTom maTeriaL HanDLing sysTems
12 ModELS
a CarrIage TO FIT YOUr OperaTIOn!
Patent Pending Pending Patent
LUMBER PRO
Heavy Duty Duty Double Double Cut Cut Band Band Mill Mill Heavy That is Sweeping the Industry. That is Sweeping the Industry. Reduces Manpower Manpower •• Reduces Adds Flexibility Flexibility from from 4/4 4/4 –– 12/4 12/4 Lumber, Lumber, •• Adds Beams, Cants, Cross Ties or Beams, Cants, Cross Ties or EVEN as as a a Resaw! Resaw! EVEN • Lower Initial Installation Cost Cost • Lower Initial Installation Unmatched Accuracy Accuracy •• Unmatched
All Machines Machines are are Cleereman Cleereman Quality Quality Throughout. Throughout. All You Get Get the the Best Best Machines Machines Backed Backed by by the the Top Top Service Service You in the the Industry Industry –– Call Call Cleereman Cleereman Today! Today! in
info@cleereman.com info@cleereman.com www.cleereman.com www.cleereman.com
PHONE: 715-674-2700 715-674-2700 PHONE: FAX: 715-674-7002 715-674-7002 FAX:
5500 PINE PINE ST., ST., NEWALD, NEWALD, WI. WI. 54511 54511 5500
www.Cleereman.com For Classifieds Call Your LBX REP at 1-800-315-9950
March 2014 n 15
Wanted: Bell Ultra C Feller Bunchers We have buyers looking for both track and rubber tired! Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com
‘08 John Deere 334J Only 900 hrs! Item ID: 13034 Contact: Richard 800.315.9950 x606 www.LBXonline.com 1994 Prentice 180D Log Loader - 11,793 hours, Machine is in good condition, it has been sand blasted and painted, low pro tires 17.5 - Item ID-12759 Richard 800-315-9950 x606 1995 Barko 160B on Mack Truck - Very clean Barko 160B on good running Mack Truck. Joystick controls. Circle Saw
Wanted: Older JD648 GIIIs & 748 GIIIs We have buyers looking!
Contact: Tom Ph: 800-315-9950 x604
www.LBXonline.com
‘08 JD 648G III
Reduced! Approx. 10,600 hrs., 5,000 on engine; new fan belt, idler pulley, & more
Item ID: 13009 Contact: Richard Ph: 800-315-9950 x606
www.LBXonline.com
‘97 Bell TF-120 Feller Buncher Item ID: 12835 Contact: Richard Ph: 800-315-9950 x606
www.LBXonline.com
Slasher Package. 27’ boom with 42” continuous rotation grapple. Cummins 6 cyl. engine runs good. Priced without slasher. Add $18,000 for circle saw slasher on trailer. - Item ID-13056 - Tom 800-315-9950 x604 1995 Entyre Low Boy Trailer 9’ 10” wide. Decent condition.
12500 - Tom 800-315-9950 x604
Priced to sell - Item ID-12946 -
1994 JD 640E Cable Skidder -
Tom 800-315-9950 x604
Very clean and good running
1995 Great Dane Flat Bed Trailer
1994 JD 640E. S/N 546241. New
- 1995 Great Dane 96x48ft. Will
28L x 26 tires. Steering cylinders
need floor. Tires are fair. Lights
rebuilt; New steering bushings;
and brakes work. Priced to sell. -
New seat; New JD radiator; New
Item ID-12892 - Tom 800-315-9950
Hyd Pump; New alternator; New
x604
Barko 275B is a 30,000 lb. lift
injection pump; Blade valve
1995 JD 290D with Hytec 4700
in excess material yard. Has
capacity unit. - Item ID-13085 -
rebuilt; New hoses; New 125’
Harvester Head - 290D in
30’ reach. Continuous rotation
Tom 800-315-9950 x604
cable. Hour meter broken but
good condition. Engine just
grapple. Cab with AC. Original
1994 JD 640E Cable Skidder -
estimated hours are 10,500.
overhauled. Undercarriage at
price was $140,000 - Item ID-
Just over 10,000 hours; 23.1 x
Machine is too large for owner. -
50%. New water pump. Runs
12969 - Tom 800-315-9950 x604
26 Tires at 70%; Chains NOT
Item ID-13102 - Tom 800-315-9950
well. Cab has heat and air with
1994 Barko 275B Trailer Mount
included: Many updates-New
x604
stereo and all run well. Head
Loader - Joystick controls. CTR
Hydraulic Pump (6 months old),
1994 JD 648E Grapple Skidder
recently updated and does great
Delimber. Recently overhauled
Rear end redone (3 Months ago);
- Good running 1994 JD 648E.
job in hardwood. Priced to sell! -
Cummins 6BT5.9 engine. Has
Hydraulic Control Block-New
Single Arch Grapple. Winch.
Item ID-12206 - Tom 800-315-9950
been sitting for about 6 months.
Seals (3 Months ago); Rebuilt
28L x 26 tires at 65%. Cummins
x604
Great Value for a loader/
Water pump (3 months ago).
engine. 7470 hours. - Item ID-
1995 Morbark Wolverine
delimber combination. The
Unit running today. - Item ID-
13103 - Tom 800-315-9950 x604
3-Wheeled Feller Buncher - S/N
16 n
The Original Lumberman’s Exchange
Visit us online at www.LBXonline.com!
‘98 Peterbilt 357 • C12 engine, 18-speed transmission, Full lockers, 7000 Cerco Loader ......... ............ Asking $55,000
Contact Steve (563) 580-0383
WI
‘83 CAT 988B 5228 hours! Item ID: 12375 Contact: Richard 800.315.9950 x606
www.LBXonline.com 4073. Only 1000 hours on new JD 4 cylinder engine. Recently replaced turbo. 23.1 tires at 50%.
x604
16” Rapid Buncher shear head.
1996 Cat D5H XL Dozer - 50%
Machine is fast and in very good
Undercarriage. 6 way blade.
condition. - Item ID-12531 - Tom
Open ROPS. 5407 Hours. Runs
800-315-9950 x604
good. - Item ID-13021 - Tom 800-
1995 Prentice 210D - mounted on
315-9950 x604
a 1989 Mack truck, new battery
1996 Franklin 560 Cable Skidder
and cables, new starter, new
- Serial number 16432; Cummins
muffler and pipe, 4 cyl cummins
Recon engine with 177 HP;
engine, all fluids and filters
28L Tires at 60%; Heat and AC;
recently changed, turn table is
Running today in very good
tight, Stick controls, All rebuilt
condition. Hour meter broken.
suspension on the mack truck,
Estimated 9500. - Item ID-12734 -
Truck is road ready. - Item ID-
Tom 800-315-9950 x604
12652 - Richard 800-315-9950
1996 Prentice 210D
x606
Knuckleboom - 10,332 hours.
1996 511EX Hydro-Ax With
- Item ID-12914 - Richard 800-315-
1996 Timberjack 230 Forwarder
tires. Single Arch Grapple.
Bunching Saw Head - Hours
9950 x606
- 15,000 hours. Good running
Winch. Heat and AC work well.
est at 6800. Only 200 hours on
1996 Timbco 425B w/Fabtek
condition. Working today. Serco
Cummins Power. transmission
factory reconditioned hydraulic
Head - Good running machine
Loader. Dry and still runs strong.
has been gone thru, it has new
motors and pumps. Comfort cab
with 9650 hours. Cummins
- Item ID-12943 - Tom 800-315-
glass in all windows but the front
with working air. 28L tires with
6BT5.9 engine. 24” pads. U/C at
9950 x604
one. Heat and air fixed and new
chains at 50%. Saw head has side
50% or better. AC/Heat/Stereo
1996 Timberjack 450C Grapple
exaust pump, and the grapple
pocket for cutting larger trees.
all work. Fabtek Model 2000RP
Skidder - Approximately 9000
cylinders repacked. - Item ID-
Very well maintained machine. -
4-Roller processor head. - Item
hours. Working today. 28L x 26
12769 - Tom 800-315-9950 x604
Item ID-12072 - Tom 800-315-9950
ID-12830 - Tom 800-315-9950 x604
tires at 40%. Chains for front
1996 Valmet 603 3-Wheeled
New Price!
‘98 Peterbilt 378 • N-14, cummins, 18-spd, engine brake, air ride suspension, aluminum wheels, tandem axle, full locker, full gauge panel, loaded 7000 Serco log loader.... Asking $55,000
Contact Steve (563) 580-0383
For Classifieds Call Your LBX REP at 1-800-315-9950
WI
2009 Peterbuilt Clean-up Truck w/ a 2009 Extenda Boom Loader Item ID: 12597 Contact: Richard 800.315.9950 x606 www.LBXonline.com
March 2014 n 17
Motivated Seller Wants Offers • 18” x 17’ Belt Conveyor, no drive..................$750 • Phelps 36” Chip Loader, no drive included..........$850 • MKC Model 40-knife Grinder, Recon.......$3800 • Mellot No. 7 Log Turner, w/valve and hydro power pack w/motor.......$6,500 • Crosby 8x48” Combo Gang Edger, lots of 26” strob saws, lots of miscellaneous spacers, infeed/outfeed tables, no motor................$10,500 • Frick 01, 5 H.B. Sawmill Carr, air dogs, Tappers, Kant Flippers Edmiston Hydro setworks w/ 5 sets, 55 ft. of rail track and ways, end of track bumpers, 50hp feedworks saw husk with 3” x 8’ Mandrel 36” pulley on Mandrel w/ V belts........... .... Take all for: $25,000
Fax Inquiries to
(717) 463-3624 or
Call & Leave Message
(717) 463-9100
‘89 Timberjack 380 Grapple Skidder Pulling Logs Now! Item ID: 13143 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com 1997 Linkbelt 3400 Stroke Delimber - 1997 Linkbelt 3400 has rebuilt Pierce Stroke Delimber. 36” Pads on 60% undercarriage. 5221 hours. Good running condition. Owner just spent $30,000 on upgrading delimber. - Item ID-12992 - Tom 800-315-9950 x604 1997 Prentice 210E TMS Package - 9850 Hours on this very clean machine. Working today. Has total merchandising system with CTR 414 Delimber and CTR 42
King Bros Transport and Logistics
Services
We offer Full Load and LTL service Flatbed, Oversized, and Special Needs Freight Nationwide Coverage, including Canada International Shipping Fully Insured Contact Us for a Quote Today! PO Box 264 • Mifflin, PA 17058 • Fax (888) 363-9697
(717) 602-4106
nelson@kingbroslogistics.com • www.kingbroslogistics.com
18 n
The Original Lumberman’s Exchange
Buncher - Good running
Slasher. Well maintained. Has
condition. Hours estimated at
AC but is not working. - Item ID-
8500. Meter does not work. 28L x
12563 - Tom 800-315-9950 x604
26 tires at 50%. Koehring 18” Hot
1997 Timberjack 460 Grapple
Saw. Cummins 4BTA3.9 engine.
Skidder - 12,300 hours. Very well
AC and Heat work. Ready to
maintained. 28L x 26 tires at 90%.
work. - Item ID-13155 - Tom 800-
Big winch. 100” Esco Grapple.
315-9950 x604
Cummins engine. Working today.
1997 Bell TF-120 Feller Buncher
- Item ID-12564 - Tom 800-315-
- 2500 hours, heat/air, U/C 90%,
9950 x604
Hydraulic system rebuilt in April
1998 Franklin 170 Cable Skidder
2012, 30” dangle head serial#
- 1998 Franklin Cable Skidder;
BCH4438 - Item ID-12835 - Chris
Unit has 28Lx26 tires 50% rear
800-315-9950 x600
and 30% front; Recon Cummins
1997 Cat 527 Grapple Dozer
6BTA5.9 engine added about a
- Tracked Grapple Skidder.
year and a half ago; Hour meter
Just under 16,000 hours. ESCO
is broken; H38 Franklin winch;
Fixed Boom Grapple & Winch
Very clean and works almost
Drum (no cable attached), 6
everyday. Chains NOT included.
Way Blade, ROPS with Wire
- Item ID-12735 - Tom 800-315-
Cage Cab. Very good interior.
9950 x604
Undercarriage at 70%, Tracks at
1998 Freightliner Haul Truck -
90%, Well maintained and ready
1998 Freightliner. Decent running
to work. - Item ID-12901 - Tom
condition. 923,000 miles. Well
800-315-9950 x604
maintained. Good back up rig! -
Visit us online at www.LBXonline.com!
P.O. Box 170 • Prentice WI 54556-0170 • 800-243-5438
www.multitekinc.com • sales@multitekinc.com
Multitek Firewood Processors Increase Your Productivity and Profitability • Quality Equipment to Reduce your Labor Costs • Circular Saw or Bar & Chain Models • 7 Models to Choose From • Production Ratings up to 5.5 Full Cords Per Hour
Made in the U.S.A.
2004 Ponsse Buffalo King Forwarder Many updates!!
Item ID: 13151 Contact: Tom Ph: 800-315-9950 x604
Late 80’s Case W20C Wheel Loader Item ID: 12606 Contact: Richard 800.315.9950 x606
www.LBXonline.com
AC blows cold. Priced to move! -
with about 6620 hours. Owner
Item ID-12616 - Tom 800-315-9950
maintains his equipment to the
x604
highest degree and it shows.
1998 Timbco 425 w/Quadco
Complete with Waratah High
2800 Saw - Clean unit and well
Speed Disc Saw Head. 28L x 26
maintained. 2800 has 360 degree
Tires with chains at 90%. Just
rotation for max production. 24”
installed new Reman Cummins
single grousers. Undercarriage
4BT3.9 Engine. - Item ID-12525 -
at 50%. Pumps are dry. Machine
Tom 800-315-9950 x604
working today. - Item ID-12719 -
1999 Cat 525B Grapple Skidder
Tom 800-315-9950 x604
- heat and a/c, New Motor with
1998 Valmet 603 3-Wheeled
3000 hours, New Bushings, New
Buncher - 6500 hours on total
Grapple Cylinder, New Turbo,
machine but no hours on
Tires are 28L x 26, fronts are at
4BT3.9 Reman Cummins Engine.
40% and rears are at 80%. - Item
46K Rear, 20K Front, Tri -Axle,
Equipped with 18” Waratah High
ID-12618 - Richard 800-315-9950
22.5 Tires, Like New Log Bed,
Speed Disc Saw. 28L x 26 Tires at
x606
Item ID-13022 - Tom 800-315-9950
Truck is in very good condition!
40% complete with chains. This
1999 Deawoo 220 solar ll - 11000
x604
Plumbed to take pup trailer. Very
machine has been extremely well
hours, it has heat and air! Its
1998 John Deere 650G Dozer
well maintained. - Item ID-12493 -
maintained and runs very well.
a Daewoo inline 6 Engine 145
- New tracks 95%, very good
Tom 800-315-9950 x604
Hard to find them in this good
hp. The Computer works for
shape, 7,000 hours. 6-Way Blade.
1998 Pitts 42’ Log Trailer - Nice
of condition. Has a twin that is
the stroker. Tracks are around
- Item ID-12700 - Tom 800-315-
condition. 42’ long. 102” wide.
available if you need two units. -
11’. Stroke delimber is a Pro
9950 x604
95,000 lb GVW. - Item ID-12565 -
Item ID-12524 - Tom 800-315-9950
mark 50. It’s designed under the
1998 Model DM Mack Log Truck
Tom 800-315-9950 x604
x604
timberline, and has a timberline
- 300 HP Mack Engine; 330,000
1998 Tigercat 230 Loader - 9400
1998 Valmet 603 3-Wheeled
head on it. We have all the
miles; 7 Speed Transmission,
hours. Tight and dry. No leaks.
Buncher - Good running machine
maitenance records and extra
www.LBXonline.com
For Classifieds Call Your LBX REP at 1-800-315-9950
March 2014 n 19
• CHIP MORE! • CHANGE YOUR KNIVES LESS! • INCREASE PRODUCTION! • DECREASE SHARPENING COSTS!
- Item ID-12936 - Chris 800-315-
TESTIMONIALS
RY ME...
any one of our Bevel Buddy™ products at no risk. Experience for self the positive cost savings.
KE ME...
y the safer operator environment handling fewer knives, reduced e resharpening costs, and less fuel consumption with sharp knives.
UY ME™!!!
use of Bevel Buddy(tm) sharpeners will improve your maintenance ess while at the same time greatly decreasing your overall ating costs involved in chipping.
“We give your business the Leading Edge.”
nge More”
parts! Great running machine!
For more information, Please Contact: PRECISION SHARPENING DEVICES INC.
814-899-0796
info@ace-supplyco.com www.precisionsharpeningdevices.com
See us at ConExpo in Morbark’s Booth #3491 Silver Lot for a live demonstration.
9950 x600
"We got our first tool about a year and a half ago, and quickly realized a big change. It turned a thirty minute knife change down to a five minute sharpening job, start to finish. This tool is the biggest help I’ve ever had. Sometimes, I get twenty loads of micro chips between sharpening; sometimes more." ~Ronnie Cahoon, Cahoon Bros.
1999 JD 643 DELTA Carrier w/
theItem knives in ID: on Sunday, and don’t have 13144 to change them for 2 days, sometimes 2 ½ Contact: Tom days, depending on the condition and kind Ph: we’re 800-315-9950 of wood running. That’s 50%x604 less knives used than before the Bevel Buddy." www.LBXonline.com ~Morris Conway, West Fraser
feller buncher saw head, or
Timberjack 230 Cable Skidder "I’ll be forever happy with this tool. I put
"We regularly maintain our chipper knives with the Bevel Buddy. We can re-sharpen the knives right on the chipper. It saves a lot of time and money in our operations. On several occasions, we’ve been able to produce up to 50 loads of chips from one set of knives." ~W.R. White, W.R. White, Inc.
Rake - This machine is a 99 model Delta. VERY POWERFUL and UNIQUE! It has a CAT 350hp engine, THREE pumps and valves that can work a mower, high speed mulcher. Only 5000 hours. 34” Tires at 60%. This machine was built on the 643G assembly line, so parts come from Deere except for the engine which CAT will support. This machine is designed for heavy duty work and includes an extra capacity fuel tank, water tank, and hydraulic tank. This is a
Financing Available
1995 Prentice 210D
WORK HORSE and a super value!
Item ID: 12652 Contact: Richard 800.315.9950 x606 www.LBXonline.com
with cold air and heater.
Comes equipped with a 10 foot rake. The cab is well appointed This machine was recently completely serviced and is ready to go to work. - Item ID-12624 Tom 800-315-9950 x604
Shrink Wrap Firewood/Wastewood
1999 Timbco 425/Valmet 500 Harvester - Branded a Valmet 500T Harvester, this is in fact a Timbco 425 Leveling Tracked Harvester with a Valmet processing head. Comes with fire suppression system; 5.9 Cummins; Burns about 4.5-5 gallons an hour. The U/C has less than a 1000 hours on it. Equipped with a Cranab 1400
Sell Your WOOD – $300/cord or More!
squirt boom. Comes with Lox
Double or triple your profits by shrink wrapping wastewood - forewood with WOOD-PAKer! Attractive various size packages can be obtained with our high production, easily operated and affordable machines. Eight machines available. The ideal equipment for producing square bundles-palletizable for ease in storage and transporting. Inquire for free details. Video and Package samples at nominal fee.
Logmate 402 computer. Head
Max 4000 harvesting head, with has about 4500 hours. Log Maxs/n 2186. Machine hour meter not working. New oil cooler 100 hours ago. Extra chains and bars, plus some parts from uptime kit. - Item ID-13140 - Tom 800-315-9950 x604
B & B Manufacturing • 3007 West River Road • Olean, NY 14760
1999 Timbco 425D Harvester w/
Toll Free 1-800-654-5320
1598; Approx 14000 hours; Squirt
E-mail: bbmfg@sprynet.com • Web: http://home.sprynet.com/~bbmfg/ 20 n
The Original Lumberman’s Exchange
Keto 800 Processing Head. S/N stick and long harvester boom (36’ reach), 28” double grouser
Visit us online at www.LBXonline.com!
ANY WAY YOU CUT IT,
IT’S GOT TO BE
WOOD-MIZER DISCOVER HOW OWNING A WOOD-MIZER PORTABLE SAWMILL IS BOTH A PASSION AND A PROFESSION.
SAVE UP TO
$2,750* Now thru April 30, 2014
Countless Wood-Mizer owners achieve success by turning their passion for wood into a profession that generates not only an income but also personal satisfaction. With Wood-Mizer you can love what you do and do what you love. Choose any of Wood-Mizer’s 12 sawmill models and you get a quality mill that is engineered for performance plus unmatched customer service. Take the next step in your decision to make your passion a profession. Call today for a FREE catalog and DVD and a guide on how to make money with a Wood-Mizer.
David Yasenchack, David Yasenchack Timber Framing & Design
© Copyright 2013 Wood-Mizer LLC
With his LT40 Hydraulic, David designs and builds unique timber frame homes, studios, and garden structures using trees from his forest.
800.553.0182 | sawboards.com
© 2014, Wood-Mizer LLC *Prices subject to change without notice.
ORA 45847 LumbermansExchange March 2014Your AnyWayPromo.indd For Classifieds Call LBX 1REP
at 1-800-315-9950
2/6/14n2:37 PM March 2014 21
ROW ELECTRICAL EQUIPMENT, INC. YOUR SOURCE FOR USED, RECONDITIONED:
• Squirrel Cage Motors • Gear Motors • Wound-Rotor Motors • Synchronous Motors • DC Motors
Fax to:
• DC Motors - Crane and Mill • Adjustable Speed Drives • Generators - AC and DC • Engine-Generator Sets • Transformers, Single Phase
P.O. Box 2812 • Toledo, Ohio 43606
• Transformers, Three-Phase • Across/Line Magnetic Starters • Reduced Voltage Starters • Safety Switches • Phase Convertors
800-248-4479
www.rowelectrical.com 419-248-4479 rowelec@glasscity.net WE ANSWER THE PHONE 24 HOURS • WE BUY USED Electrical
419-244-8887
‘81 JD 850 Grapple Dozer
Running Today! Item ID: 13149 Contact: Tom Ph: 800-315-9950 x604
www.LBXonline.com
‘05 Kenworth T-800 w/Rotobec MT27 Loader Item ID: 12612 Contact: Richard Ph: 800-315-9950 x606
www.LBXonline.com
Hyster 70 XL2 Forklift Item ID: 12607 Contact: Richard 800.315.9950 x606 www.LBXonline.com
( 2002?), new tracks, top knives
12944 - Tom 800-315-9950 x604
weight = 82,500lbs. Tires =29.5 x
11/11, 40” 11H bar, 33” cut, no
2000 GMC 8500 Log Truck w/
25-28 PR earthmover type, bias
top saw, Hakmet computer,
Loader - 2000 Model GMC C8500:
tubeless at 70%. - Item ID-12938 -
CanBus computer system with 4
Six speed transmission with a
Tom 800-315-9950 x604
wires. - Item ID-13150 - Tom 800-
2 speed rear end. Powered by
2000 New Holland EC215 w/
315-9950 x604
a strong CAT 3126 engine with
Waratah 616 Processor - Approx
2000 Cat M318 MH - Totally
250HP. Approx. 106,000 miles.
7200 hours. 2000 New Holland
refurbished with 30 day
Truck is single axle with pusher
Model EC215 with Waratah 616
warranty. Gone through from
in front. Pusher purchased new
Processing Head; Carrier in
end to end by professional
one year ago. Loader is a 1995
good condition. Tracks at 70%
rebuild factory. Hydraulic
Prentice Model 120c w/22’ reach.
with 32" pads; Cummins 6BT5.9
elevated cab for great visibility.
Has one or two hydraulic drips.
engine with 154HP; S/N 721580;
38’ reach. Logging grapple
Pole Trailer is a 60’s model
Operating weight = 47000 lbs;
included. Fantastic Yard
Frost w 80% tires in very good
Waratah head has top saw
Machine. FOB: Idaho. Financing
condition. Pulls great. - Item ID-
option. - Item ID-12849 - Tom 800-
pads. Cummins 8.3L 260 hp
available. Possible RENT
12893 - Tom 800-315-9950 x604
315-9950 x604
engine (New Reman 11/10). New
OPTION! - Item ID-12520 - Tom
2000 Grove RT750 Rough Terrain
2000 Peterbilt Sleeper Truck -
rails and rollers 9/11. Reman
800-315-9950 x604
Crane - Super nice unit. Loaded.
Good running condition. Priced
Rexroth tram pumps 1/12. Non
2000 Fabtek 153 Harvester -
6500 hours. Very good condition.
to sell. - Item ID-12492 - Tom 800-
continuous rotation on upper.
13,000 hours. New Engine; New
CAT 3116 Diesel Engine; 360
315-9950 x604
Keto 800 processor head -
Pumps; New Roller Chain; Runs
degree rotation. Max reach
2000 Prentice 625ATL Loader -
Approx. 2002 model. S/N C3T020
Great! Working today. - Item ID-
over 170’ with both jibs. Total
2000 Prentice All Terrain Loader.
22 n
The Original Lumberman’s Exchange
Visit us online at www.LBXonline.com!
All wheel drive and steer. Set up to pull loaded trailer. Great yard machine. 10,800 hours. Cab access platform. Cab riser. All maintenance history available. FOB: Maine. - Item ID-12898 Tom 800-315-9950 x604 2001 CAT 330BL Log Loader Good running condition. 2000 hours on new hydraulic pump. 44’ Live Heel Boom w/Jewell Continuous Rotation Grapple. S/N 6DR04994. New sprockets and rails. Cab riser and cab
1997 Ford Tree Trimming Truck Item ID: 12605 Contact: Richard 800.315.9950 x606 www.LBXonline.com
‘01 Sterling Clean-up Truck
w/Serco Loader
Item ID: 12600 Contact: Richard 800.315.9950 x606 www.LBXonline.com
‘99 Timbco 425D Harvester w/Keto 800 Item ID: 13150 Contact: Tom Ph: 800-315-9950 x604
www.LBXonline.com
guard. Total hours 19,000. - Item
(16PR); Floor 19’ long; Tail 5’
ID-12678 - Tom 800-315-9950 x604
long; Hyd operated ramps 5’
2001 Chevy C7500 Service
long. Super package and priced
trailer, California legal, rubber
Item ID-12526 - Tom 800-315-9950
Trk w/Trailking Trailer - Great
to sell!! - Item ID-12746 - Tom 800-
at 85%, and good brakes. Tows
x604
package. Chevy truck has Cat
315-9950 x604
smooth. Equipped with Husky
2001 Timbco 445D w/Quadco
3126B engine. 28,877 miles.
2001 Precision 23/66 Whole Tree
175 loader. Has 3 knife disc
2800 Saw - Only 4050 hours
22.5” tires are in good shape.
Chipper - One Owner: S/N 3310.
with key knife system installed.
on this gem! Extremely well
Good steel flatbed with mini
Cat 3412E engine with 750HP
Makes a super clean chip. Cab
maintained. Very Good
fifth wheel and headache rack.
s/n 4CR01701. New Injectors.
has heat and AC working well.
Condition. Undercarriage at
Trail King Trailer Model # TK
Includes air compressor. Oil
Also has stereo radio and CB.
80%. 360 rotation on head. New
32-2401. GVWR 40180 lb; GAWR
changed every 250 hours. 10,500
New glass in loader. External
12 tooth disc on saw. New main
18160 lb.ea. with 215/75R X 17.5
hours and runs like new. 3 axle
chute controls. Super Clean! -
pump. New radiator. New water
For Classifieds Call Your LBX REP at 1-800-315-9950
March 2014 n 23
When You Buy Your Circular Saws From B.H. Payne You’ve Bought the best... We Guarantee It! Traditional Quality Combined With Todays Technology Quality Brand Reg. U.S. Pat Off
Circular Saws Saw Bits and Shanks Circular Knives Carbide Tipped Saws Carbide Strobe ® Saws B.H. Payne & Company Saw Manufacturers
Call 800 752-0627
Make Sure To Ask For Our Free, Complete Saw Catalog We Manufacture & Sell Inserted Tooth Headsaws, Solid Tooth Saws, Inserted Tooth Cutoff Saws & Carbide Saws. We also Stock & Sell Bits & Shanks, Carbide Tips, Diamond Wheels, Knife Grinding Wheels, Saw Gumming Wheels & Knives.
Here’s What You Get With Every B.H. Payne Saw • Saws manufactured from only the Highest Quality Nickel Alloy Steel. • Each Saw Milled with State-Of-The-Art Precision CNC Milling Machine. • We Tension Your Saw to Your RPM Speed BEFORE Leaving Our Factory. • Your Satisfaction - Completely Guaranteed.
B.H. Payne & Company, Inc. P.O. Box 90608 East Point, GA 30364 404 761-8711 Fax 404 761-5398 “Since 1890” E-mail: info@paynesaws.com
‘93 Timberjack 380B Tree Trimmer Clear Roadways Item ID: 13090 Contact: Tom Ph: 800-315-9950 x604
www.LBXonline.com
Web Site: www.paynesaws.com
1989 Int’l Clean-up Truck w/2004 Serco 8000 Ldr. Item ID: 12601 Contact: Richard 800.315.9950 x606 www.LBXonline.com
1989 JD 540D Cable Skidder Item ID: 13146 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com
‘10 CAT D9T w/ Chip Blade
Mill Machine! Item ID: 13152 Contact: Tom Ph: 800-315-9950 x604
www.LBXonline.com 12659 - Tom 800-315-9950 x604
upgrading. - Item ID-12867 - Tom
2002 Timbco 445D w/22” Quadco
800-315-9950 x604
Hot Saw - Only 2400 hours on
2002 New Holland TV140 w/10’
Upper which was replaced after
Brush Cutter - Only 3000 hours.
burning at 2000 hours. Total
Very well maintained. Brush
hours on lower undercarriage
Cutter has less than 500 hours.
is 4400 and has been rebuilt.
Complete with winch and
70% life left on lower. Customer
forestry package. Tires at 80%.
has rebuilt the engine with a
Comfort cab with great visibility.
new cylinder head, pistons,
Extremely productive and stingy
rings,bearings,gaskets, and fuel
on fuel. - Item ID-12414 - Tom
transfer pump with only 700 hrs.
800-315-9950 x604
on rebuild.. Unit has a new saw
2002 Tigercat 845B w Quadco
disc on the 22” Quadco Hot saw
Hot Saw - 8500 hours on
with 360 degree wrist... Main
machine. About 3200 on new
boom to stick boom pin and
Cummins engine. Quadco head
bushings have been replaced
has 40 degree tilt and new saw
in a the last 3 months and saw
blade. Tracks at 60%. Rebuilt 2
pump was installed about a
years ago. Well maintained. Heat
year ago. THIS IS ONE OF THE
and A/C in cab. - Item ID-12751 -
CLEANEST 2002 MODELS YOU
Tom 800-315-9950 x604
WILL FIND AT THIS PRICE! - Item
2002 Timbco 425D Processor
ID-12541 - Tom 800-315-9950 x604
w/Rolly II - 2002 Timbco 425D
2002 Timberjack 608s with hot
with Rolly II disc saw processor
saw - 2002 Timberjack 608s with
head. 14,000 hrs. New Cummins
hot saw, approx. 6000 hours,
engine; New saw motors New
Machine is in very good shape
sprockets; New hyd pumps.
and has been well maintained.
Leveling upper. Heat/AC in cab.
- Item ID-12194 - Richard 800-315-
Very sound machine that runs
9950 x606
pump. New Pro Heat just added.
1.5 hours on engine. New
well. - Item ID-13014 - Tom 800-
2003 Cat 533 Hot Saw FB - 2003
Many other updates. VERY NICE
Coupler between Transmission
315-9950 x604
Cat 533 Hot Saw FB. 7500 hours.
MACHINE! Ready to work. SN
and Engine. New Pivot pins and
2002 Timbco 425D w/Fabtek
28L tires at 70%. Working today. -
FT4C-2002. - Item ID-12486 - Tom
Bushings. 360 degree Supergrip
Proc. Head - Very nice machine
Item ID-13080 - Tom 800-315-9950
800-315-9950 x604
Grapple. One Set Log Bunks. One
and well maintained. 11,229
x604
2001 Timbco 820-D Forwarder
Set Tracks - Item ID-13094 - Tom
hours, but only 1400 on recon
2003 Franklin Q70 Grapple
- Model TB-820-D; Serial #TB154-
800-315-9950 x604
Cummins engine. 24” Single
Skidder - 2003,Model Q70-
012901. Hour meter reads 7075
2001 Valmet 860.1 Forwarder - 6
Grousers. Undercarriage is 70%.
M31A,Enclosed Cab W/Heat &
but actual hours are about 9500.
Wheel Drive. Chains for most
Fabtek has been rebuilt and
A/C,28Lx26 Tires 85% Rear,70%
Brand new Cummins 260 HP
tires. 17,000 hours. Runs good
updated to make it stronger than
Front , 100 Hours On Dealer
Engine with Cummins Warranty
and is working today. Owner is
new. Head works great. - Item ID-
Rebuilt Transmission, 600 Hours
24 n
The Original Lumberman’s Exchange
Visit us online at www.LBXonline.com!
‘06 JD 648GIII Grapple Skidder
LBX In-house Financing Now Has Money Available! Were you recently declined for funding?
Duals not included
We can help!
Item ID: 13088 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com On Cummins Recon Engine 6BTA 200 H.P. Winch and Grapple. Excellent one owner machine! -
If you answer YES to any of these questions:
Item ID-12337 - Tom 800-315-9950 x604 2003 Franklin Q80 Grapple Skidder - 7500 hours, but just 5000 hours on reman engine.
1 Do you have more than two months in business? 2 Do you have a FICO Score of 500 or greater? 3 Do you have at least $100,000 in Annual Sales?
New Radiator; New Hydraulic Pump; Comfort cab with good working heat and air; Tires at 80%. - Item ID-12450 - Tom 800315-9950 x604 2003 Hydro Ax 670 with Bunching Head - Super nice
You Qualify!
machine with ONLY 1600 hours! 30.5 tires at 90%. Cummins 6BT8.3 engine. AC/Heat. Side pocket style head. Jewel of a machine! - Item ID-12729 - Tom 800-315-9950 x604 2003 JD 648GIII Dual Arch Grapple Skidder - Refurbished 2003 JD 648GIII Dual Arch Grapple Skidder with approx. 8000 hours. 30.5 x 32 tires at 50% or better. The machine is dual arch w/reman arch, boom, grapple, engine and transmission. The machine also has had the normal repairs of: resealed all cylinders, pins and bushings, center pins, cradle and addressed all electrical issues. Any potential problems were found and fixed or replaced. Limited Power Train Warranty. Can exchange existing tires for new and receive credit on existing tires against new tire
FCP was founded on the principle that investing in good business is still good business. Accordingly, our focus is providing multiple capital procurement options for small- and medium-sized business owners. FCP offers both traditional and non-traditional financing options, including: Small Business Loans, Merchant Cash Advances, and Equipment Leasing. Backed by 2 billion dollars in assets, regardless of your financial needs, FCP can deliver. Your credit score is a picture of your past, at FCP we invest in your vision of the future.TM
Get approved and start building your future today! • • • • • •
Equipment Purchase or Leasing Purchasing inventory Facility expansion Hiring additional employees Launching a marketing campaign General working capital
LBX
Financing Don’t Wait to invest in your future, Call Today!
Empowering small business owners to live the American dream—one client at a time!
(800) 315-9950 x603
For Classifieds Call Your LBX REP at 1-800-315-9950
March 2014 n 25
Safety� Safe Durable� Durable
(262) 673-6801 Local
Comin gS 4 New oon Mode ls
Made inA the US
The Firewood Factory Lil’ Beaver Model Call for Free DVD
Starting at
7995
$
Beaver Model 18 Optional Features Available
Reliable� Reliable� Reliable
Convenience� Convenient
Features: • 1 to 2 plus full cords per hour (128 cubic feet) • Cuts up to 16” diameter and up to 20’ lengths • Splits wood up to 24” • Splitter cycle time 4-5 seconds • Honda Engine GX-390, Subaru 14hp or PTO driven • Super fast, Super Safe!
Call Toll Free
Nothing Eats Wood Like a Beaver 1-800-569-6813 www.woodbeaver.net | sales@rrsinc.net
™�
CAT D5B Dozer
Item ID: 13113 Contact: Tom Ph: 800-315-9950 x604
www.LBXonline.com 9950 x600 2004 JD 648GIII S/A Skidder Super Clean JD 648GIII Single Arch Skidder. Selective use. 11,000 hours of light to moderate work. Winch. 28l x 26 tires at 90%! That’s about $10,000 + in new rubber! Runs great. Well maintained. - Item ID-13087 - Tom 800-315-9950 x604 2004 JD 748GIII Grapple Skidder - Good running condition. Well maintained by one owner. 14,800 hours. 35.5 tires at 40%. Extra set of 50” flotation tires to be
2007 Liebherr A924 Log Loader
3-Strand Green Chain 36’x8’ w/ Stops
Item ID: 13154 Contact: Tom Ph: 800-315-9950 x604
Item ID: 12596 Contact: Richard 800.315.9950 x606 www.LBXonline.com
Priced to Sell!
www.LBXonline.com
included. Working on job today.
Case 1150 Dozer
Dual Arch Grapple. Winch. Heat and AC. - Item ID-13076 - Tom
for Under $20K!
800-315-9950 x604
Item ID: 13112 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com
2004 John Deere 700H LGP - This machine has 1987 hrs on a crate motor. Very Strong running machine. Being used daily! Limb Risers, screens, 6 way blade, 30”
price. Ex: add new 30.5 x 32 tires
control system, and a few other
machine. Very nice condition.
pads. - Item ID-13035 - Chris 800-
for $14,000. - Item ID-12905 - Tom
things. Last year we pulled the
Fabtek 4 Roller processing
315-9950 x600
800-315-9950 x604
engine out and went through
head. Pro Heat cold weather
2004 Log Max 9000 Proc. Head -
2004 Barko 495 Loader w/
it and also had the pump gone
start system. One track is brand
Good running condition. Rebuilt
Delimber - 11000 Hrs. New
through. Runs very well. Great
new. Working today. Customer
every year. Many spare parts.
Turntable Bearing. Upper and
Value! - Item ID-12686 - Tom 800-
shutting down job. - Item ID-
Computer included. Super Value!
Lower Valves Resealed. Both
315-9950 x604
12950 - Tom 800-315-9950 x604
- Item ID-12929 - Tom 800-315-
swing motors resealed. New pins
2004 Cat 535B Grapple Skidder
2004 Franklin Q80 single arch
9950 x604
and bushings in main and jib
- SIN AAE00566, 12,000 hours.
grapple skidder with winch - 200
2004 Ponsse Buffalo King
boom. CTR 450 Delimber. Cold
Replaced center pins, repacked
HP Cummins engine Powershift
Forwarder - 18 ton capacity.
AC. - Item ID-12897 - Tom 800-
cylinders, and repaired hydraulic
transmission Comfort cab with
S/N 120001, 2 part extendable
315-9950 x604
control valve for grapple. 73 x
working heater and AC New
K100 loader. (1) new 750/50x26.5
2004 Cat 330C Log Loader -
44, 32 tires- Runs good. Priced
Manifold gasket and bolts New
tire Nov ‘13, (2) tracks rebuilt
14,500 hours. New undercarriage
to sell! - Item ID-12693 - Tom 800-
muffler New grapple head New
Nov 2012, (1) track rebuilt Nov
on it, rebuilt the grapple,
315-9950 x604
shifter box Tires 85% 28L X 26
2011, (1) track new Nov 2011,
repacked boom cylinders, put
2004 Fabtek 133 Harvester
Good Solid Machine- Runs great!
Hydrostats replaced 2010; New
in new air ride seat, new climate
- 11,400 hours. One owner
- Item ID-12843 - Chris 800-315-
centerpin Nov 2011; New front
26 n
The Original Lumberman’s Exchange
Visit us online at www.LBXonline.com!
MDI probe 2100
Portable Industrial Metal Detector Simple to operate –
just turn on and go! MDI’s Superior Digital Technology will detect an 8d nail buried 15" into a log! • Pre-set for maximum sensitivity with adjustable sensitivity control • Microprocessor controlled; eliminates mineral interference from logs or round for maximum detection depths • Bright L.E.D. display indicates signal strength and battery level • Touchpad control allows precision pinpointing of tramp metal
Sawmill Exchange North America's Largest Source of Used Portable Sawmills. Over 800 Ads:
Portable Sawmills, Commercial Sawmills, Pallet and Cutstock Manufacturing, Firewood Manufacturing, Chipping and Grinding, Trimmers, Debarkers, Dry Kilns, Edgers, Resaws, Ripsaws and Gang Saws, Loaders, Moulders and Planers, Sawdust Blowers and Chains, Conveyors/Transfers/Decks/Green Chain, Rolling Stock, and Much More!!
The Place to Sell Your Equipment Call Us for a Free List of Over 800 Ads or to Sell Your Equipment.
800-459-2148 (
P.O. BOX 26440 • EUGENE, OREGON 97402 PHONE: 541-345-7454 • FAX: 541-345-7971 www.metaldetectorsinc.com
)
US & Canada
www.sawmillexchange.com
“Providing a full range of industrial metal detectors since 1965.”
P.O. Box 710930 • Houston, TX 77271 diff; all planetaries and bogies
swing just replaced. New main
inspected; Nov 2011. Hyd Pump
hyd. pump. Loading logs now.
replaced 2010; Loader hoist and
Cummins 5.9. - Item ID-12617 -
stick cylinders repack/repaired
Tom 800-315-9950 x604
Dec 2014; Drop box replaced
2005 Barko 595 Loader on SP
2010; New radiator June 2012.
Carrier - Loader on Big John
Approx 23000 total hours.
Self Propelled Carrier. Carrier
Timbco clambunk attachment
is towable. Unit has 7900 Hrs.
with all plumbing made to attach
Equipped with Live Heel and
to Ponsse frame (needs clamps)
continuous rotation grapple.
- Item ID-13151 - Tom 800-315-
Has JD 185HP engine. Has Cab
9950 x604
Riser with Tilt Option for easy
2004 Ponsse Wisent - Very nice
transport. - Item ID-12912 - Tom
machine. Many recent updates
800-315-9950 x604
such as new batteries and
2005 Ecolog 580B Harvester -
alternators. Tight and dry and
Ecolog 580B Harvester with Log
working today. 13,000 hours. 8
Max 7000 Processing Head w/
wheeler that includes Eco Tracks
Steel Rollers. Very good running
for rear bogey. Tires at 70%. -
condition. S/N 240. 7700 hours.
one set of tracks. Engine is Cat
Item ID-12856 - Tom 800-315-9950
Recent updates include: New
3126. Equipped with a Wabasto
x604
water pump; New implement
preheater. Machine is factory
Heavy duty Sweda Axles. 35.5
2004 Tigercat 240B Log
pump; New swing motor; New
reconditioned by Ecolog. Center
tires at 60%. Winch. Dual arch
Loader on Trailer - Very clean.
hydraulic oil cooler and oil
section and bearings are new. -
grapple. New transmission at
One owner machine. Good
cooler bypass valve. It has
Item ID-12826 - Tom 800-315-9950
8000 hours. Recent engine work.
maintenance. Tight and dry.
a DASA4 control system and
x604
- Item ID-13077 - Tom 800-315-
7800 hours. Brand new engine
ICAN monitoring system. Rear
2005 JD 748GIII Grapple Skidder -
9950 x604
just installed! Planetary gears on
bogeys are 650 size and include
Working every day. 11,500 hours.
2005 JD 748GIII Grapple Skidder
‘05 Western Star w/’09 Lemco 75XLT Loader Item ID: 12598 Contact: Richard 800.315.9950 x606
www.LBXonline.com
For Classifieds Call Your LBX REP at 1-800-315-9950
‘96 Valmet 603 3-Wheeled Buncher Perfect for Thinning! Item ID: 13155 Contact: Tom Ph: 800-315-9950 x604
www.LBXonline.com
March 2014 n 27
Integrity • Precision • Quality • Value
Woodmaster See why we are your Best Source for bandsaw blades! We offer the highest quality welds and our people use the highest level of integrity and precision to give you the best bandsaw blades in the business—we ship all over the US. Satisfaction always guaranteed!
Thin Kerf
Band Saw Blades
‘05 JD 748GIII Grapple Skidder Priced to Sell! Item ID: 13058 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com
‘07 Hood 182 Loader/ Carrier/Slasher Total Package! Item ID: 13082 Contact: Tom Item ID: 13056 800.315.9950 Ext. 604 www.LBXonline.com
Ask About Our Dismanteling Blades
ck Cheut Our O
1-888-857-5153
Quality • Our Service • Our Price
John Deere 440B Cable Skidder
‘97 Ford L9000 Log Truck Item ID: 12602 Contact: Richard 800.315.9950 x606
- 2005 JD 748GIII in good running
800-315-9950 x604
condition. 8900 hours. 2005 Hrs:
2005 Prentice 280 TMS - Good
8900. Rebuilt engine by local
running machine. Hour meter
Deere dealer at 7500 hours. 66
shows less than 2000 hours but
x 43 tires. 80% front: 60% Rear.
owner believes it to have about
Winch works well. Dual arch
6000. Machine serial number
Tom 800-315-9950 x604
Very good running condition.
grapple. Priced to sell! - Item ID-
is PR59771. Unit has Cummins
2005 Timberking TK360 Feller
Over $50,000 in recent updates
13058 - Tom 800-315-9950 x604
engine and runs good with no
Buncher - Rubber tired feller
and maintenance. New center
2005 Komatsu D39 PX Dozer
blow-by and has no leaks and is
buncher, good condition 9023
pin bushings; new bogey seals;
- Approx. 2150 hours, 6-way
tight Dependable machine that
hours, new A/C. 22" high-
valves resealed; all cylinders
dozer, canopy, joystick controls,
is priced right with the market. -
capacity head w/side cutter put
packed. 10,200 hours. Largest
limb risers 25" pads, SBG,
Item ID-12527 - Tom 800-315-9950
on at 5000 hours. Front tires at
of rubber tired harvesters. Has
new hydrostats and pumps
x604
75%, back tires 50% - Item ID-
Valmet 370.2 processing head
Undercarriage 75%, condition
2005 Takeuchi Supertrack Skid
12995 - Tom 800-315-9950 x604
with less than 4000 hours.
good to very good - Item ID-
Steer with B74 Fecon Head - 981
2005 Valmet 860.1 8-Wheeled
Tracks included for bogeys.
12994 - Tom 800-315-9950 x604
Hours. 102 HP Engine. New
Forwarder - 13,800 hours. New
Has spare 370.2 head for parts.
2005 Morbark Model 2755 Flail/
Tracks. Fecon B74 Mulching
hydraulic transmission and
Engine runs well. Tires at 50%.
Chipper - S/N = Q78. Hours =
head with new teeth. Winch.
gear box. $70,000 of updates
This is a hard to find gem and
6500. Tires: 295/75R22.5. (Two)
Comes with spare 80” bucket.
just completed by local Valmet/
priced below market. - Item ID-
Cat engines: Model 3412 in front
Half the price of new. - Item ID-
Komatsu Dealer. Spare pump
12569 - Tom 800-315-9950 x604
with 860HP: Model 3406 in rear
12413 - Tom 800-315-9950 x604
($7,000 value) Good running
2005 Valmet/Timbco 415
with 425HP. Originally came
2005 Tigercat 718 FB w/5500
condition. Sisu engine uses 4
Harvester with 370E Head - Very
out as a 3 flail converted to a
Saw Head - Very well maintained
gal/hour. 16 ton capacity. Tracks
nice unit. 7400 hours. 370E
2 flail debarker. Handles up to
machine with 9400 hours. Dry
for front and back. Front blade.
Harvesting head just added 22
30” whole trees. Set up for 2”
and tight. 28L tires at 60%.
Hood guard. - Item ID-12267 -
months ago and only has 2000
chips. Recently came off job.
Running good today. AC blows
Tom 800-315-9950 x604
hours. 36” Triple Grouser tracks
Well maintained and in good
cold. Heat works great. Center
2005 Valmet 941 Harvester -
at 60%. Sisu engine that is very
condition. - Item ID-12690 - Tom
section tight. - Item ID-12939 -
Totally refurbished head to toe!
stingy on fuel. 8’ squirt at end of
28 n
The Original Lumberman’s Exchange
Item ID: 12644 Contact: Richard Ph: 800-315-9950 x606
www.LBXonline.com
www.LBXonline.com
Visit us online at www.LBXonline.com!
AJD Forest Products
Premium Kiln Dried Hardwoods Northern Red Oak is Our Specialty Lake States Largest Producer of Industrial Lumber P.O. Box 629 • Grayling, MI 49738 • (989) 348-5412 • FAX: (989) 348-2500 Email: fred@ajdforestproducts.com • Web: www.ajdforestproducts.com
Dry Kilns • 2 Sawmills • 25,000,000 BF Annual Production boom for 30’ reach. Reversible fan and auxiliary oil cooler. Item ID-12266 - Tom 800-315-9950 x604 2006 Hydro-Ax, Model 764 w/ AX1910 Mowing Head - 4700 hours. Cummins engine. 30.5 x 32 tires at 60% or better. Includes tire chains for all tires. Good running condition. Well maintained. - Item ID-12987 - Tom 800-315-9950 x604
‘04 JD 648GIII S/A Skidder New
Item ID: 13087 Tires Contact: Tom Ph: 800-315-9950 x604
www.LBXonline.com
2006 JD 648GIII Grapple Skidder
‘06 TF 810 TimberPro Forwarder Item ID: 13114 Contact: Tom Ph: 800-315-9950 x604
www.LBXonline.com
2003 Manitou 523 Item ID: 12604 Contact: Richard 800.315.9950 x606
www.LBXonline.com
- 9400 hours on good running
loader platform with chair,
CONTAINMENT DOOR. 16
machine. Sweda Axles with 28L
loader. The chipper has been
FUNCTION RADIO REMOTE.
good, Approx. 6900 hours - Item
& 23.1 Duals. Winch. Recently
recently serviced by a certified
SUPER PACKAGE! Optional new
ID-12996 - Tom 800-315-9950 x604
rebuilt JD engine. Dual Arch
Morbark dealer who installed
knife skin - $20,000 which is half
2006 Tigercat 720D Feller
Grapple. Heat and AC. - Item ID-
new blades and anvils. The
price of new. - Item ID-12692 -
Buncher - New Cummins Engine,
13088 - Tom 800-315-9950 x604
machine also has 2 new tires. -
Tom 800-315-9950 x604
Enclosed Cab heat & air, 28.1 x
2006 JD 748GIII Dual Arch
Item ID-12964 - Tom 800-315-9950
2006 Peterbuilt Log Truck w/
26 Tires, 5000 series sawhead.
Grapple Skidder - 7200 Hours;
x604
Loader & Pup - 2006 Peterbuilt
7012 hours. Very good condition.
New JD Transmission at 6500
2006 Morbark 6600 Horizontal
log truck and Rosa aluminum
S/N 7204313 - Item ID-12752 -
hours; A/C and Heat work well;
Grinder - Approx. 6000 hours on
crib pup trailer. Has Rotobec
Tom 800-315-9950 x604
30.5 x 32 tires @ 40%; No winch
this well maintained machine.
Model 80 elite loader. Cummings
2006 Valmet 890.3 Forwarder
but has the controls in cab;
Has New Cat Dealer Rebuild
motor with 450,000 miles.
- Well maintained 20 ton
Heavy duty Sweda axles. - Item
1000HP Engine at 5000 hours.
Excellent shape. Hauling logs
forwarder by Valmet. Has 13,700
ID-13120 - Tom 800-315-9950 x604
42” X 66-5/8” HAMMERMILL;
today. - Item ID-13018 - Tom 800-
hours. Very good running
2006 John Deere 748GIII Dual
VARIABLE SPEED INFEED
315-9950 x604
condition. Front hood guard
Arch Skidder - 8900 hours. Good
SYSTEM; HAMMERMILL DRIVE
2006 TF 810 TimberPro
and two complete sets of tracks
condition. Working today. One
INCLUDES ALL BELTS, SHEAVES,
Forwarder - w/ Cold Weather
included. Located on West
owner machine. Tight and dry.
BUSHINGS & SHIELDS. ENGINE
Package Start. 6744 hours. 260
Coast. Priced to sell! - Item ID-
32.5 tires at 50%. - Item ID-12542 -
GAUGE PANEL & EMERGENCY
HP Cummins. One set tracks at
12709 - Tom 800-315-9950 x604
Tom 800-315-9950 x604
SHUT DOWN SYSTEM LOCATED
60%. 700/50 tires @ 60%. Very
2007 Bandit Model 3680 Beast
2006 Morbark 18 Hurricane
IN AN ANTI-THEFT CONSOLE.
good running condition. - Item
Grinder - Only 780 confirmed
Chipper w/Loader - Good
ELECTRONIC RPM SENSOR
ID-13114 - Tom 800-315-9950 x604
working hours; 700HP C-18 CAT
running portable chipper
& AUTO FEED SYSTEM. 430
2006 Tigercat 630C Grapple
Engine; Twin Disc Hydraulic
equipped with loader. JD 6068
GALLON FUEL TANK. 238
Skidder - Decking blade, new
Clutch; Air Compressor;
engine with 250HP. Hydraulic
GALLON HYDRAULIC OIL TANK.
a/c installed, new hydrostats;
Reversible Fan; Remote Control;
swivel Discharge Chute; Tandem
IQAN CONTROL SYSTEM.
Dual function grapple, 40K Allied
IQAN Controls; Magnetic head
axle package, Hydraulic rear
DUST SUPPRESSION SYSTEM.
winch; 30.5L32 tires, 3 @ 75%, 1
Pulley; Excellent condition! -
stabilizer, large hydraulic tank,
HYD OPERATED DEBRIS
@ 20% Condition good to very
Item ID-12628 - Tom 800-315-9950
For Classifieds Call Your LBX REP at 1-800-315-9950
March 2014 n 29
Jackson Shavings Mill REduced
‘79 Timberjack 230 Forwarder Cheap and Runs Good!
2005 Jackson Shaving Mill, Model: 16 4D Mill is powered by a 3-phase, 30 hp motor; Hydraulic powered by a 3-phase 30 hp motor; The box was upgraded for hydraulic in place of chain driven; Comes with 6-sets of knives. Unit is in excellent condition! Comes with a Grizzly knife sharpener, conveyor, and forage box.
Forage Box
REduced
Conveyor
Item ID: 12795 Contact: Chris Woods 800.315.9950 Ext. 600
www.LBXonline.com
Item ID: 13057 Contact: Tom Ph: 800-315-9950 x604
www.LBXonline.com
‘95 Barko 160B on Mack Truck Nice Package! Item ID: 13056 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com
kind of engine. Includes tools, fuel tank, spare parts, and air
hours. Good running condition.
compressor. Super Package! -
Hydraulic raising cab. Rotobec
Item ID-12910 - Tom 800-315-9950
Grapple. Approx 42’ reach. - Item
x604
ID-13154 - Tom 800-315-9950 x604
2007 Fecon FTX440 w/Fecon BH
2007 Liebherr A924B Wheeled
350 Mulcher - Totally rebuilt
Log Loader - 10,100 hours.
in 2009 by Fecon with all 2009
Very Good Condition. Liebherr
updates. 1670 hours. Cat 440
makes the highest quality heavy
HP Engine; Heavy Duty Winch;
equipment in the world. This
Triple grouser high flotation
unit can go another 20,000
tracks; Excellent condition.
hours. 44’ reach with over 7000
Priced to sell! - Item ID-12632 -
lb capacity at 40’. Hydraulic
Tom 800-315-9950 x604
raising cab for 16’ 8” operator
2007 Hood Model 182 Loader
eye level. Front blade for
on Carrier w/Slasher - Super
pushing or cleaning road debris.
Clean Hood Model 182 Loader
Grapple NOT included. Travels
mounted on Hood self-propelled
up to 12.5 mph with variable
and towable carrier. Includes
speed hydraulic transmission.
Hood circle saw slasher package.
Super smooth hydraulics make
Approx. 6700 hours. Excellent
this a great wood yard machine. -
running condition. Hard to
Item ID-12503 - Tom 800-315-9950
find loaders equipped like this.
x604
AC and Heat inn Cab. Joystick
2007 Log Max 7000 Processing
controls. JD 6068T engine.
Head - Super Clean unit that
Includes $600 in filters for
includes the top saw option.
complete servicing. - Item ID-
Designed for quality processing.
13082 - Tom 800-315-9950 x604
Dual tilt cylinder option.
2007 Lamtrac 6125 Tracked
Includes the Log Mate 400
Mulcher - Purpose built. 125hp
computer system for accurate
Cummins engine. Only 1336
measuring. Also includes rotator.
hours. Purchased brand new
Approx. 4800 hours on head.
in April 2012. Tracks at 50%.
Wheel motors like new. Dry and
Includes winch. Full protection
tight. Ready to work. - Item ID-
x604
Just a great value! CTR was
comfort cab with AC/Heat.
12885 - Tom 800-315-9950 x604
2007 CTR 950B Grapple Skidder
owned by Prentice, and is now
Compare to new at $155,000. -
2007 Morbark 22 RXL 1000HP
- Excellent Condition. Only 3500
supported by CAT Dealers. - Item
Item ID-12909 - Tom 800-315-9950
Chipper - 8000 hrs. Cummins
hours. Single arch grapple. 30.5
ID-12664 - Tom 800-315-9950 x604
x604
1000 HP Engine runs strong.
x 32 tires at 60%. Heat/AC/Stereo
2007 Dodge Service Truck - 5.9L
2007 Liebherr A924 Log Loader
Just replaced feed tray, end
in Cab. Cummins 6 cyl. engine.
Cummins. This is the last of this
- Rubber Tired Log Loader. 9300
spout, belly liners, hood liners,
30 n
The Original Lumberman’s Exchange
Visit us online at www.LBXonline.com!
‘04 Timberking TK560 Loader w/ CTR450 Delimber Item ID: 12483 Contact: Richard 800.315.9950 x606
www.LBXonline.com and one pump. Machine overall is in very good condition. S/N
2011 Case TR320 Skid Steer Mulcher 300 Hours! Item ID: 13020 Contact: Tom Ph: 800-315-9950 x604
www.LBXonline.com
2043. DISCHARGE SYSTEM: Dirt separator with deflector
a knife grinding machine (with
Hydraulic swivel/telescoping
knives) that can be purchased
discharge spout. CHIPPER: 22”
separately with machine. A well
diameter chipping capacity, 75”
maintained machine that was
diameter four-knife chipper disc
working well up to being shut
with Left Hand rotation Chip
down at end of job. - Item ID-
sizes: 5/8”, 3/4”, 7/8”, 1”, 1-1/4”,
13134 - Tom 800-315-9950 x604
2”. Hydraulic chipper hood for
2007 Peterson Model 4800E
easy knife access. 30 ft. x 10 ft
Portable Debarker - Good
CAT chain infeed bed. Enclosed
running machine and very
weatherized operators’ cab
well maintained. 9950 hours
is mounted on rubber shock
approximately. CAT 3306 Engine.
absorbers with combination
$40,000 in recent maintenance
air conditioner/heater. Tilts
with records from owner. Great
hydraulically for transport. Six-
unit for making clean chips. -
way adjustable seat and joystick
Item ID-12941 - Tom 800-315-9950
controls. Morbark 1000 knuckle
x604
boom loader, 25 ft reach, 210
2007 Prentice 384 TMS Loader
degree swing. By-pass grapple.
Package - 2007 Prentice 2384
Lift capacity of 20,000 lbs. at
t/a trailer mounted log loader
10 ft. OPTIONS: reversing fan,
Cummins 6-cyl engine. New
twin disc clutch; Electronic RPM
injectors and pumps in Jan '13.
sensor with automatic back feed;
New a/c installed, 32' length
Buncher - 2007 Tigercat FB with
each hub allow this machine
11 hp Quincy air compressor;
boom. 2006 John Evans trailer
5000 Bunching Saw Head. 8900
to climb where NO OTHER
Pre lube on engine while
with 75% 11-22.5 tires. Includes
hours. Very well maintained.
MACHINE can go! 4 New 700
starting. - Item ID-12449 - Tom
CTR Delimber. Condition is good
Good running condition.
tires and rims come with it for
800-315-9950 x604
- Item ID-12997 - Tom 800-315-
Cummins engine. Tight and dry.
rubber tired operation. Recently
2007 Morbark 2355 Flail Chip
9950 x604
28L x 26 Tires at 50%. 1000 hours
gone through and updated.
Harvester - Three knife, three
2007 Tigercat 630C Skidder - Very
on rebuilt engine. - Item ID-12989
Very unique and hard to find a
flail machine. New long block
clean unit. S/N on request. Tires
- Tom 800-315-9950 x604
machine like this! Priced well
engine installed in September
at 60%. 6519 hours. Big capacity
2007 Valmet/Komatsu Model 911
below market. Sold new without
of 2011; About 5600 hrs on it
grapple. Tight and ready to
Extreme Harvester - Only 4000
head in 2008 for $575,000! - Item
now. Total hrs on the unit are
work. One owner machine. - Item
hours on this special machine.
ID-12571 - Tom 800-315-9950 x604
approx 11,000. Also, there is an
ID-12275 - Tom 800-315-9950 x604
Has new Log Max 6000 added
2008 CTR 450 Delimber - Like
extensive parts inventory and
2007 Tigercat 718E Feller
in 2013. Individual tracks on
new. Used for less than 100
‘08 JD748 H Grapple Skidder Item ID: 13064 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com
For Classifieds Call Your LBX REP at 1-800-315-9950
‘08 Ponsse Ergo Harvester Wholesale Price!
Item ID: 13060 Contact: Tom Ph: 800-315-9950 x604
www.LBXonline.com
March 2014 n 31
Reconditioned Electrical Equipment Saves You Money, Big Money! VFD Control
‘06 Peterbilt Log Truck
Item ID: 13018 Contact: Tom 800.315.9950 Ext. 604
www.LBXonline.com
We Buy, Sell, or Rent— Used, Obsolete and Hard to Find Industrial Electrical Equipment
Many Items In Stock Ready for Immediate Shipment!
Automatic Reduced Voltage Starter
All Sizes of Motors
Complete Kent 2-Head Resaw
Manual Transfer Switch
with Run around
Combination Starter
Contact: Richard 800.315.9950 x606 www.LBXonline.com
When you need it Now— And at the Best Price! You Need Weaver Electric Motor Control Starters (Solid State)
intake heater for cold weather starting, heat/ac, stereo - Item ID-13034 - Richard 800-315-9950 x606
Disconnect Switch
2008 John Deere 648G III - It has around 10,600 hours. New engine installed at 5,000 hours. We
Call Today!
repacked all 4 boom cylinders
Toll Free 800-257-0038
and the 2 grapple cylinders.
Ph: 303-288-0746 • Fax: 303-288-0218 6591 N. Washington, Denver, CO 80229 Web: www.weaverelec.com Email: spark@weaverelec.com
All new rods were installed in these cylinders. A/C system (condenser) has been cleaned. Seat has been recovered. Brake valve resealed. New fan belt.
hours. Paint still on unit.
Hand held remote control. Triple
tilt cab and guard. - Item ID-
New idler pulley. Hoses were
Compare to new 450 at $34,000.
chain feed deck. Produces high
12967 - Tom 800-315-9950 x604
changed as needed. This is a
No description needed. Consider
quality chips with patented
2008 JD748 H Grapple Skidder -
clean tight machine ready to
like new. - Item ID-12900 - Tom
‘Cone’ drum design. Can easily
Good running machine. Used on
work. - Item ID-13009 - Richard
800-315-9950 x604
load 42’ vans and produce 6 - 8
job with three shifts so hours
800-315-9950 x606
2008 Dynamic 585 Cone Head
loads per day. - Item ID-12694 -
are 15,000. 43” flotation tires at
2008 Komatsu Model 220LL
Chipper - S/N 5019. John
Tom 800-315-9950 x604
50%. Just finished going through
w/38’ Live Heel Boom - Only 2000
Deere 500 HP engine. Only 861
2008 JD 2054 Log Loader -
shop. All functions working well.
hours. Jewell purpose built Live
hours. New knives and anvils.
15,000 total hours, but 9000
- Item ID-13064 - Tom 800-315-
Heel and 52” continuous grapple.
Wear liners, discharge chute,
estimated working hours. New
9950 x604
30” Double Grouser Pads: 4’ cab
fan blades on drum have all
Undercarriage except for tracks.
2008 John Deere 344J - Only 900
riser with hydraulic tilt; Cab
been updated and replaced
34’ live heel boom. Continuous
Hours!! Great running condition,
guard; Exterior Cab Lights; Heat/
approximately 200 hours ago.
rotation grapple. Cab Riser with
z-bar, 3rd valve, ride control,
AC; Running boards for easy
32 n
The Original Lumberman’s Exchange
Visit us online at www.LBXonline.com!
BANDSAW BLADES
We have the most popular sizes in stock & ready to ship from major manufacturers, including…
We also offer expert Sharpening Services, plus…
Gang • Edger • Scragg Trim • Split • Strob …and
just about any Custom Saws you need to keep you cutting longer… for less!
Welded to your lengths! Call Marvin Miller for a quote 231-924-5953 • (fax) 231-924-6166 • 11606 Brickyard Rd. • Holton, MI 49425
2004 Hood 28000 Loader w/Hotsaw Item ID: 11418 Contact: Richard 800.315.9950 x606 www.LBXonline.com maintenance access. Excellent
Morbark 1200 Tub Grinder Item ID: 12919 Contact: Richard Ph: 800-315-9950 x606
www.LBXonline.com
condition. Great yard machine. -
‘12 Log Max 7000C
Processing Head Item ID: 13074 Contact: Tom 800.315.9950 Ext. 604
‘94 Barko 275B Loader Pkg. Runs OK: Low Price!
Item ID-12634 - Tom 800-315-9950
features joystick operation and
x604
75hp electric motor; 440v. FOB:
2008 Ponsse Bear Harvester
Georgia 8000 hours. Maintenance
- Just 6800 hours. Equipped
records available. Mill closed.
with best in class Ponsse H8
Machine working well when mill
- Only 750 hours; Cat 440HP
harvesting head. Very well
ended operation. - Item ID-13017
engine; Heavy Duty Winch;
maintained. Mercedes engine
- Tom 800-315-9950 x604
Triple grouser high flotation
CTR delimber works great. AC/
very stingy on fuel. Eco tracks
2008 Valmet 415 Harvester
pads at 95%. Like New! - Item ID-
Heat/Radio in cab. Engine runs
for bogies. Hood guard. Largest
- Very nice machine. 5500
12633 - Tom 800-315-9950 x604
great with no blow by. Tight and
harvester on the market. Out
hours. Valmet 380 Processing
2010 JD 848H Grapple Skidder
dry. - Item ID-12871 - Tom 800-
produces any other rubber tired
head recently rebuilt and
- 5000 hours. Running duals at
315-9950 x604
harvester for performance and
running good. 24” pads on 60%
this time. Powerful machine.
2010 Prentice 2670 w/Single Post
capacity. - Item ID-12810 - Tom
undercarriage. Heat and air work
Everything working great. Tires
Saw Head. - Only 3199 hours.
800-315-9950 x604
well. Sisu engine is stingy on
at 50% or better. - Item ID-12800 -
Cummins engine. 30.5 x 32 tires
2008 Ponsse Ergo Harvester -
fuel. - Item ID-12866 - Tom 800-
Tom 800-315-9950 x604
at 40%. Single post saw head.
Very clean unit with just 8600
315-9950 x604
2010 John Deere 1110E
Great Value! - Item ID-12552 - Tom
hours. Equipped with the
2010 CAT D9T with Chip
Forwarder - Super Clean
800-315-9950 x604
advanced Ponsse H-7 Head
Blade - Cat D9T Dozer with
machine. 8 Wheeled. Only 5800
2010 Tigercat 630D Grapple
and C-4 Boom. One owner. Well
wood chip arrangement. Back
hours. One owner and well
Skidder - Super nice Tigercat
maintained. Tracks for bogies.
up Alarm. Product link; 27”
maintained. Hard to find them
630D with 5589 hours. NEW 35.5
Superior Value - Item ID-13060 -
tracks; 9SU Blade with edge
with low hours like this! - Item
Firestones. Cummins engine.
Tom 800-315-9950 x604
group. Oil change system. Rear
ID-12947 - Tom 800-315-9950 x604
Dual Arch HD Grapple. Winch.
2008 Prentice 2210 Stationary
counterweight. - Item ID-13152 -
2010 Prentice 2280 TMS Loader
Excellent condition. Runs great! -
Mount Loader - 2008 PRENTICE
Tom 800-315-9950 x604
Package - Super clean loader/
Item ID-12738 - Tom 800-315-9950
Knuckle Boom Loader - Model
2010 Fecon FTX440 w/ Fecon
delimber package on trailer. Just
x604
2210-SM; stationary electric;
Model BH350 Mulching Head
4400 hours. Cummins engine.
2010 Valmet/Timbco 445FXL w/
www.LBXonline.com
For Classifieds Call Your LBX REP at 1-800-315-9950
Item ID: 13085 Contact: Tom Ph: 800-315-9950 x604
www.LBXonline.com
March 2014 n 33
Now One Phone Puts You in Touch with the Single Source for all your Sawmill Needs! Corley Sawmill Machinery Tyrone Berry Carriage Drives Lewis Controls Optimization Carriage Linear & Set Shaft Lewis Controls “Electronics for sawmills by sawmillers” Tyrone-Berry Carriage Drives & Parts • Headrig Slabbers Log Turners • Bandmills & Linebar Resaw Systems Board & Gang Edgers • Trimmers
The Most Complete Line of Sawmill Machinery Since 1905! Single Machine or Complete Turn-Key Operation More Production & Profit is Only One Call Away For Parts, Service & Sales
mfg
Call (423) 698-0284 CORLEY www.corleymfg.com • sales@corleymfg.com
Real Tuff Baler&Baggertm Save $$$ on Bedding—Bale it Yourself! Electric or Diesel, Manual or Automatic
$15,905 Effective May 1, 2012
REAL TUFF INDUSTRIES Manufactured by M & F Gauge & Specialty Co., Inc.
PO Box 693 Brownwood, Texas 76804 Phone: 325-641-8300 Fax: 325-643-3243
BUILT TO LAST www.realtuffbaler.com
Dear Prospective Customer,
Thank you for inquiring about our Real Tuff Baler! From baling wood shavings to aluminum cans, the Real Tuff Baler is built to last, and priced for a quick return on your investment!
Real Tuff Baler
Real Tuff Baler Dimensions & Specifications
• Easy to use
- (2) Hydraulic Cylinders are controlled by using a two spool valve
• Built of high quality materials and workmanship
- 30 H.P. motor (220/440 volt 3 phase) starter not included
• Heavy duty to enable a broad spectrum of baling options • Easily loads by conveyor or manual method
- 25 G.P.M. Pump - 50 Gallon reservoir capacity
. Easy to use
. Built of high quality materials and workmanship
- Only the highest quality industrial components are used
. Heavy Duty to enable a broad spectrum of baling options
. Easily loads by conveyor or manual method Most Popular Baler Sizes
Real Tuff Industries Real Ruff Baler Size 12” x 16” x 36” 12” x 16” x 32” 11” x 17” x 36” 8” x 18” x 36” 5” x 10” x 16” - Call For Price
Bale Size
4.0 cubic foot bale 3.5 cubic foot bale 3.9 cubic foot bale 3.0 cubic foot bale 0.4 cubic foot bale
Bales per Hour
50 - 60 bales per hour 50 - 60 bales per hour 50 - 60 bales per hour 50 - 60 bales per hour 50 - 60 bales per hour
Phone: (325) 641-8300 Fax: (325) 643-3243 . Custom baler’s can be manufactured to your specifications .
Real Tuff Baler Dimensions & Specifications Manufactured by M & F Gauge Specialty Co., Inc. 2 - Hydraulic& Cylinders are controlled by using a two spool valve 30 H.P. motor (220/440 volt 3 phase) starter not included PO Box 693 • Brownwood, Texas 76804 25 G.P.M. Pump 50 Gallon reservoir capacity Only the highest quality industrial components are used www.realtuffbaler.com Real Tuff Baler Price: $12,997.00
Terms: 50% deposit upon receipt of purchase order. The blance is due upon completeion which will be approximately thirty days from placement of order. F.O.B. Brownwood.
‘06 Tigercat 630C Grapple Skidder
‘02 Timbco 425D Processor w/Rolly II
Item ID: 12996 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com
Item ID: 13014 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com
03/08
Builtrite Stationary Electric
100HP Cummins engine. Total
Loader. New Condition with
mulching package. Includes
only 95 actual hours. The Model
Fecon BH74 mulching head with
60 has 18’ of reach and about
6’ cutting width. Priced well
1,100 pounds of lift at full reach,
below dealer cost. - Item ID-
with the grapple attached. The
12675 - Tom 800-315-9950 x604
grapple is a ¼ cord, butt styled
2011 JD 1010E 8-Wheeled
with gripping bars. It opens to
Forwarder - Super Nice Machine!
66” and is 20” wide. This package
Just 2300 hours. Owner
includes everything from the
downsizing. Comes with new set
power pack to the comfort cab
of tracks and set of chains. - Item
with head and AC. If you have
ID-12955 - Tom 800-315-9950 x604
a loading challenge in your
2011 JD 848H Grapple Skidder
operation, this is an economical
- Just 3200 hours. Excellent
and quiet way to handle it. - Item
condition. Running duals for
Roy Saw Head - 2010 Valmet
Chipper w/Loader - ONLY 1700
ID-12705 - Tom 800-315-9950 x604
high flotation. Dual Arch. Winch.
445FXL with HD Komatsu
hours. Contractor finished
2011 Case TR320 Tracked Skid
Comfort cab! - Item ID-12801 -
undercarriage at 50%. Just
job. Operator controls entire
Steer Mulcher - 2011 Case Skid
Tom 800-315-9950 x604
5750 hours. Many extras. Cold
operation from cab. 700 HP
Steer with mulching head and
2011 Puma 612 Forwarder -
weather start. Deluxe heated
Cummins engine. 50” mill. High
bucket. Only 300 hours and in
under 4000 hours. The machine
seat. GN Roy Hi-Speed Disc Saw
flotation 36” triple grouser pads
excellent condition. Skid Steer
has the new Barko 612 cooling
head with 360 degree rotation.
on 80% undercarriage. Super
has Hi Flow option for maximum
package update + some other
Fire Suppression Pkg. Very good
Package. Sold new at over
performance to head. - Item ID-
minor repairs. Volvo 220HP
condition. Well maintained. -
$500,000. - Item ID-12665 - Tom
13020 - Tom 800-315-9950 x604
engine is very fuel efficient.
Item ID-13023 - Tom 800-315-9950
800-315-9950 x604
2011 Fecon FTX100 w/ a BH74ssv
12,000 lb capacity. Comfort cab.
x604
2011 Builtrite Model 60
mulcher head - 233 Hours.
Kesla Loader and Supergrip
2010 Woodsman 440TL Tracked
Stationary Loader - Model 60
Comfort cab with Heat/AC.
grapple. Very good running
34 n
The Original Lumberman’s Exchange
Visit us online at www.LBXonline.com!
Every Reputable Wide Band Supplier Offers
‘07 Prentice 384 Loader Pgk. Loader/Del/Trailer!
Item ID: 12997 Contact: Tom 800.315.9950 Ext. 604
‘11 Puma 612 Forwarder Item ID: 13092 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com
www.LBXonline.com condition - Item ID-13091 - Tom 800-315-9950 x604 2011 Puma 612 Forwarder - Has new cooling system installed along with other minor repairs. S/N = F6121004110414. 3600 hours. Volvo 200HP Tier III engine. Tires: 28L x 26 front; Nokian 710/45x26.5 rear. All at 70%. Front Blade; 12,000 lb. capacity. Cab w/Heat and AC. Kesla Crane and Hultdins
3 High Quality Swedish Steel 3 3” – 8” Band Width 3 16 to 20 Gage 3 Double Cut Options 3 Choice of Swage or Stellite
‘10 JD 648H Grapple Skidder with Tracks! Item ID: 13015 Contact: Tom Ph: 800-315-9950 x604
WOLVERINE
BUT ONLY THE BY MENOMINEE SAW GUARANTEES • Cutting Edge Plasma Welds • The Industry’s Highest Band Saw Capacity • Quick Delivery from our HUGE Inventory • Fast Sharpening & Exchange Program to Keep YOU Running • Competitive Pricing And ONLY Menominee Gives You Everything You need in a Wide Band Saw – Plus Expert Service from the Industry’s Most Knowledgeable Staff. Got a Wide Band Problem? Call Menominee Saw Today and You’ll Learn Why More Mills Trust the Pro!
www.LBXonline.com
grapple. FOB: Rhinelander, WI. Item ID-13092 - Tom 800-315-9950
BC, Canada INCLUDES ONE
x604
YEAR LIMITED WARRANTY!! -
2011 Remanufactured KMC
Item ID-12549 - Tom 800-315-9950
Tracked Grapple Skidder - Model
x604
#42 KMC Model 2500P ( Dual
2011 Valmet 430FXL w/ Keto
Arch Grapple) Track Skidder.
870TS Proc. Head - 2011 Valmet
Cummins 6BTA (174 HP). -
430FXL with Komatsu built
Clark 28000 Series Powershift
undercarriage. Includes KETO
Transmission. John Deere
Model 870TS Processing Head.
Model 40 Winch (40,000 lb
Less than 3000 hours on total
Serial Number available. Great
45’ Log Trailer - spring
line pull). Hydraulic operated
machine. Excellent condition.
running condition. Owner
suspension, tires are in good
controlled Steering Differential.
Head will have all updates
leaving business. - Item ID-12908
shape 6 sets of bunks and a
Planetary Final Drives. - ESCO
according to owner. Compare to
- Tom 800-315-9950 x604
headache rack - Item ID-12587 -
Dual Arch Grapple. - Fully
new at $600,000! - Item ID-13029 -
2012 Refurbished FMC 210
Richard 800-315-9950 x606
enclosed Hi-Vis Cab c/w Heater,
Tom 800-315-9950 x604
Tracked Skidder - 1976 Model
‘84 Eager Beaver Trailer - 9' wide
Air Conditioning, Lights, Swivel
2012 Log Max 7000C Processing
that has been totally refurbished
by 48' long. Detached front,
Suspension seat c/w Joystick
Head - Only 865 hours. Like
in 2012. No hours since updates
middle drop is 26 feet. Load
Controls. - Pilot operated closed
new condition. All components
were done. Includes warranty
from the front or back. Tires and
center Hydraulics. Sundstrand
included such as Log Mate
on machine and tracks. Detroit
brakes are 80% sand blasted
Sauer 45 Series Pump: - DanFoss
402 computer and Super Grip
6V53 engine with 195HP. Clark
painted, everything goes,
Model L90LS 5 spool control
handles. Ready to install on
28000 Powershift transmission.
chains, binders, cones. Excellent
valve - New. KMC Wear Resistant
proper carrier. - Item ID-13074 -
Clark 40,000 lb Winch. ROPS Cab.
condition. Located Southern NY.
Tracks & Sprockets . Torsion Bar
Tom 800-315-9950 x604
Includes bolt on grapple head
- Item ID-13096 - Chris 800-315-
suspension. Heavy Duty Cast
2012 Rayco Tracked Mulcher -
with full function. New Paint. -
9950 x600
Steel KMC Road/Idler Wheels.
100hp Kubota Engine. Only 950
Item ID-12731 - Tom 800-315-9950
95 Bell Ultra T on tracks -
Standard Decking Blade. FOB:
hours. 90% track life remaining
x604
Machine has a total of approx.
TOLL FREE 1-800-582-0470 900 16th St., Menominee, MI 49858 Tel: 906-863-2609 Fax: 906-863-1147 Email: info@menomineesaw.com
WWW.MENOMINEESAW.COM
For Classifieds Call Your LBX REP at 1-800-315-9950
March 2014 n 35
The Richmond Show EXPO RICHMOND 2014
Richmond Raceway Complex * Richmond, Virginia Friday May 16th 9:00a.m. until 5:00p.m. and Saturday May 17, 2014 9:00a.m. until 3:00p.m. th The 34 East Coast Sawmill and Logging Equipment Exposition
will be 2014’s largest collection of sawmill, logging, biomass, pallet and related manufacturing equipment, supplies and services in the Eastern United States. Nearly 300 exhibiting companies and thousands of forest products industry people will convene for the 34th Richmond Show. The newest and most advanced machinery, equipment and technology in the industry will be on display. There will be acres of active hands-on machinery and equipment demonstrations outside, plus hundreds of indoor displays of new products, methods, technology and trends. Examine and compare products or services before making your
purchasing decisions to improve the efficiency - and profitability - of your operation. Don’t miss this opportunity to invest in your future. Please fill out and return the pre-registration form below to the exposition office by April 1, 2014. Confirmations will be mailed to all pre-registered individuals no later than May 4, 2014. There is no charge to attend the exposition if you pre-register; there will be a $10.00 charge for those who register on-site. For further information, please call (804) 737-5625.
EXPO RICHMOND 2014
Co-sponsored by Virginia Polytechnic Institute & State University Cooperative Extension and Virginia Forest Products Association
Return by April 1, 2014 to: EXPO RICHMOND 2014 • P. O. Box 160 • Sandston, VA 23150-0160 Please fill out completely and legibly. Incomplete or illegible forms can not be processed.
Only industry personnel should complete this form. Please copy this form for additional registrants. Spouses and children under 18 will receive passes at the entrance gate which will allow them to enter the exposition free of charge.
Your Name:
Nickname:
Company:
Title:
Address: City:
State:
Telephone:
FAX:
E-mail:
ZIP:
Country (if not USA): PLEASE CHECK ALL CLASSIFICATIONS OF INTEREST: -- (You must check at least one) G Dealer Sales G Paper/Pulp G Other (Please Specify) :
G Sawmilling G Logging G Pallet Production/Recycling G Equipment Manufacturer G Plywood/Panel
Pre-registration allows entrance to the Exposition (May 16 - 17, 2014, 9am-5pm) at no charge. On-site registration is $10.00. Exhibitors: Please do not use this form. Contact show office for exhibitor registration information. Additional information is available on the Internet at www.exporichmond.com Educational Course Thursday, May 15, 2014 Two half-day workshops will be held on Thursday, May 15, 2014 on “Improving The Quality of Lumber Drying” and “Financial Management for Forest Products Business” at the Four Points by Sheraton. Lumber drying operations, no matter the size, must provide a good quality product to maintain their customer base. Drying defects not only lead to product value losses but if passed onto the customer can lead to lost sales. The morning workshop is designed to assist anyone drying lumber from the small-scale lumber dryer to commercial drying operations. The techniques and information presented are relevant to both hardwood and softwood lumber drying operations. A good understanding of financial management is critical to manage and control the business. During the afternoon session, participants will start with a business simulation that will help you to understand financial statements including specific terminology. Participants will also learn to analyze financial statements uncovering current problems or discovering potential business opportunities. For registration information ONLY FOR THE SEMINAR, contact Angie Riegel at the Department of Wood Science and Forest Products at Virginia Tech; Telephone: (540) 231-7107; fax: (540) 231-8868; e-mail: ariegel@vt.edu Note: Angie Riegel provides registration information ONLY for the seminar - NOT for the exposition. You must register for the each event separately.
36 n
The Original Lumberman’s Exchange
Visit us online at www.LBXonline.com!
‘96 CAT D5H XL Dozer Item ID: 13021 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com 7000hrs. Deutz engine runs well. Joystick controls. 25” pads on U/C that is 80%. Has 30” Bell dangle saw head. AC works. Needs windows in the doors.
x606
Hyd. cooling fan works. Owner
Cat D5B Dozer - s/n 22X380,
advises that he has packed all
direct drive, EROPS, S-Dozer w/
cylinders on machine within the
tilt.; Limb risers; Hyster Winch,
last year. Owner also reports
serviceable u/c - Item ID-13113 -
that during extremely hot days
Tom 800-315-9950 x604
the hydraulic pump seems to get
Caterpillar Excavator Model 235
weaker. - Item ID-12873 - Chris
- 1239 hours, 3306 Caterpillar
800-315-9950 x600
engine, hydraulic thumb - Item
Bob Cat T190 skid loader, 4653
ID-12371 - Richard 800-315-9950
hours. - Item ID-12922 - Richard
x606
800-315-9950 x606
Dorsey Drop Deck Trailer - 45’
Case 1150 Dozer - OROPS Cab;
Long. Heavy Duty Ramps. Good
6-way Angle blade, Hyster
Michelin Tires. Currently in
winch; Limb risers; Serviceable
use and has carried (2) Cat 518
Undercarriage. FOB: West Texas -
skidders with no problem - Item
315-9950 x604
Item ID-13112 - Tom 800-315-9950
ID-12662 - Tom 800-315-9950 x604
Morbark 1200 Tub Grinder -
x604
Extec Shredder - Item ID-12926 -
Powered by a 3412 Cat engine,
Buss 24x8 planer Model H - Item
Case 1H Skid Loader - model
Richard 800-315-9950 x606
600-hp. Tilt tub. Hours are
ID-12609 - Richard 800-315-9950
70XTS11, 2890 hours. - Item ID-
Franklin Skidder - 2003, Model
unknown. - Item ID-12919 -
x606
12923 - Richard 800-315-9950
Q70-M31A,Enclosed Cab W/Heat
Richard 800-315-9950 x606
Yates American Planer - model#
x606
& A/C,28Lx26 Tires 85% Rear,70%
Timberjack 230 Cable Skidder
820-12, infeed deck, duct work
Case 580M - Case Backhoe 580
Front , 100 Hours On Dealer
- Older Timberjack 230 Cable
to main line included, pineapple
Super M, S/n JJG0374975 Hours
Rebuilt Transmission, 600 Hours
Skidder with 18.4x26 tires.
roller feed, currently up and
7270. - Item ID-12924 - Richard
On Cummins Recon Engine 6BTA
Detroit 3-53. All functions work.
running - Item ID-12556 - Richard
800-315-9950 x606
200 H.P. Excellent one owner
Priced to sell. - Item ID-13144 -
800-315-9950 x606
Cat 518 Grapple/winch Skidder -
machine! - Item ID-12152 - Tom
Tom 800-315-9950 x604
Late 80’s 4WD Drive; Cat winch,
800-315-9950 x604
maintained machine.; 30.5 x 32
JD 643D Saw Head FB - Decent
Kubota Utility Vehicles RTU900.
powered by a 25-hp Kohler gas
Tires, 95% rubber. 130-hp, all
machine. Estimated 1993 model.
Four (4) available. Hours on
engine. It is a 2005 year model
pins are good. - Item ID-12202 -
Serial number available for
each are 1350, 1005, 1105, 1209.
with approximately 400 hours.
Richard 800-315-9950 x606
verification. Recent JD recon
$7,000.00 each. - Item ID-12917 -
Runs great and comes with 2
Cat 988B Loader (2 available) -
engine. Tires at 60%. Cameco
Richard 800-315-9950 x606
boxes of blades - Item ID-12009 -
One with 9282 hours, the other
Saw Head. Needs new teeth. AC
Toledo 10x35 truck scale with
Richard 800-315-9950 x606
hours not recording. - Item ID-
works. Running today. Priced to
monitor, frame, indicator and
12915 - Richard 800-315-9950
move. - Item ID-12845 - Tom 800-
printer. - Item ID-12921 - Richard
‘04 Linkbelt 3400 Stroke Delimber
Item ID: 12992 Contact: Tom 800.315.9950 Ext. 604 www.LBXonline.com
MISCELLANEOUS
For Classifieds Call Your LBX REP at 1-800-315-9950
‘06 Hyd-Ax 764 w/1910 Mower Runs Great! Item ID: 12987 Contact: Tom Ph: 800-315-9950 x604
www.LBXonline.com 800-315-9950 x606
PLANERS
PORTABLE SAWMILL
Timber Harvester HD-30 -
RECYCLING EQUIPMENT
2006 W. S. Machinery Brute
March 2014 n 37
March 2014
Press Releases
Bandit Returns to Southern Forest Nascar in 2014 Products assoc. With Parker Kilgerman
Names Executive Director
F
ollowing a great 2013 NASCAR season with rising superstar Parker Kilgerman, Bandit Industries will return to the stage at Daytona International Speedway with Kilgerman in the NASCAR Camping World Truck Series on February 21. Bandit will serve as coprimary sponsor for Kilgerman, driving the No. 58 Bandit Chippers/North American Power Toyota for BRG Motorsports in the Nextera Energy Resources 250. “When Bandit first got involved with NASCAR back in 2010, it was with Parker,” said Bandit’s Marketing and Communications Director Christopher Smith. “To be back with him at Daytona after the great season we had with him last year is very special to us. Parker is a great ambassador for Bandit, he’s an amazing driver, and he’s NASCAR’s next superstar. When he takes to the track he’ll have Bandit customers all around the world cheering, not to mention our mid-Michigan community and the 400-plus employees at Bandit. We couldn’t be more excited to kick off the 2014 NASCAR season.” Kilgerman echoed Smith’s sentiment, adding, “First off, I want to thank everyone at Bandit Chippers and George Bragg at BRG Motorsports for this opportunity. After our awesome race and fourth place finish at Talladega last year, I am looking forward to racing Daytona with one of my partners from years prior in Bandit Chippers. Hopefully we can have successful weekend and challenge for victory, just as we did at Talladega.” “Parker is a dynamic personality and a fierce competitor,” said Smith. “We can’t wait to see the show he puts on for us at Daytona.” LBX Update: A huge crash during a Wednesday afternoon practice session forced Paul Kilgerman to a backup car resulting in a disappointing Daytona 500 29th place finish. Kilgerman is contending for rookie of the year and we are cheering for his success here at The Lumberman's Exchange. For more information about Bandit Industries please call (800) 952-0178.
T
he Southern Forest Products Association (SFPA) Board of Directors has appointed Tami Kessler to serve as Executive Director. Tami has most recently served the association as Corporate Secretary and Director of Administration. Since she joined the staff in 1976, Tami has served in multiple capacities including accounting, 28 years as Director of Administration, plus two terms as director of SFPA’s Forest Products Machinery & Equipment Exposition. “Tami brings a comprehensive set of skills set to the management of SFPA operations at our headquarters, and the Board congratulates her on this well-deserved promotion,” stated SFPA Chairman Joe Kusar after making the announcement at a recent Board of Directors meeting in Atlanta. “Knowing what she does about our daily operations, she is well prepared to manage the future progress of our association,” he added. “Working with SFPA’s staff of dedicated professionals, I am looking forward to continuing to serve all SFPA members and further enhance the value of their membership,” Tami said. She can be reached by phone at 504/443-4464 ext. 222, or by e-mail to tkessler@sfpa.org.
Introducing the New
Environmental Equipment Horizontal Grinder
TEE
is an industry leader in the design and manufacture of wood processing and recycling equipment and is launching the NEW TBG 640, Horizontal Grinder effective March 1, 2014.
For Classifieds Call Your LBX REP at 1-800-315-9950
Marty Dummigan, TEE Global Product Line Director, said, “We are excited to be launching the new TBG 640 for both the wood processing and recycling markets. We have listened to our customers throughout the design process and the TBG 640 has some unique features and specifications which, we believe will establish the product as a class leader in the industry.” TEE will also launch the TBG 640 with the new color scheme which was introduced in 2014 for the large biomass and recycling equipment. The Terex Environmental Equipment Horizontal Grinder is manufactured and designed for high performance and strong product reliability. With user friendly controls and good fuel efficiency, it is built with ease of maintenance in mind reducing downtime, with components being easily accessible in the field for service technicians. The TBG 640 is capable of working in the most demanding environments. Biomass and bio energy industries will find this product an ideal fit. Recycling yards and landfills will also find the TBG 640 as the solution for creating the recycled products they require. It features a hammermill of 65” wide and 34” in diameter, the infeed opening is 41” high and 63” wide and an engine with 700 horsepower, with 755 Tier 4 option. The TBG 640 is capable of producing in green waste between 300 to 400 yards and scrap wood 400 to 500 yards per hour. As with all Terex Environmental equipment, it comes complete with the latest generation engines to meet all global emission standards Key Features: • Unique Engine Load Management System to save fuel and increase production • Heavy duty design and manufacture for extended service life • Tail conveyor position can remain folded for easy maintenance • Quick and easy screen changes • PTO belt tensioner for ease of maintenance • Model designed chassis Terex Environmental Equipment 1250 Commerce Drive Farwell, Michigan, 48622 United States www.terex.com/environmental-equipment March 2013 n 38
Over 26 years in Business
‘05 Komatsu D39 PX Dozer
‘07 Peterson 4800E Portable Make Debarker Clean
www.LBXonline.com
www.LBXonline.com
Item ID: 12994 Contact: Tom Ph: 800-315-9950 x604
Item ID: 12895 Chips! Contact: Tom Ph: 800-315-9950 x604
See us at the – 2014 Vermont Expo May 9-10, 2014 Essex Junction, VT
We Now Have
8
DVDs Available
Models to Choose From
Horizontal Grinder - Model
Owner Truck, 110,000 miles,
3456HB. This is a tier 2 machine
8LL Trans, 46,000 lb rears, Full
and meets all current California
locking rears, Factory double
emission standards. Equipped
frame, 430hp engine - Item ID-
with a Cat 540 horse power C-15
12612 - Richard 800-315-9950
diesel engine. This unit has been
x606
serviced and well maintained. It
2005 Western Star with a 2009
has approximately 8700 hours.
Lemco 75XLT Loader - 120,000
The clutch and electronic brain
miles, 475 hp cat engine, 18
have been recently replaced.
speed trans., 46000lb rears - Item
Located in CA. Priced to sell!! -
ID-12598 - Richard 800-315-9950
Item ID-12691 - Tom 800-315-9950
x606
x604
2009 Peterbuilt Clean Up Truck
2004 Finley 883 screener. - Item
with a 2009 Serco 8500 extenda
2006 Wood-mizer LT-40 - 2006
3 extra set of knives, 60-65hp
ID-12927 - Richard 800-315-9950
boom Loader - PW, PL, Leather
Wood-mizer LT-40 super
needed to operated. - Item ID-
x606
interior, Wood Grain dash,
hydraulic - Item ID-13105 - Chris
12756 - Richard 800-315-9950 x606
576,990 miles - Item ID-12597 -
800-315-9950 x600
Jackson 16 4D Shaving Mill -
1989 International Clean Up
Richard 800-315-9950 x606
2008 Challenger Grinder Model
Model: 16 4D Mill is powered by a
Truck with a 2004 Serco 8000
Several Timberjack Rear ends
CHSP 200-4090 - Like New
3-phase, 30 hp motor; Hydraulic
Extenda boom Loader, 466,021
will fit models 450, 360, 460,
Condition. Only 500 hours.
powered by a 3-phase 30 hp
miles - Item ID-12601 - Richard
380 - Several Timberjack Rear
120HP - 3 phase electric motor.
motor; The box was upgraded
800-315-9950 x606
ends will fit models 450, 360,
2 sets of screens, 3/4 and 1”.
for hydraulic in place of chain
1997 Ford L9000 Log truck -
460, 380. These axles are priced
Photos say it all. Machine runs
driven; Comes with 6 sets of
425hp cat engine, 260,000 miles,
cheap and we can bundle them if
great. Owner lost contract. This
knives This unit is in excellent
8LL Trans., 46 rears, double
needed. - Item ID-12603 - Richard
machine makes great animal
condition! Comes with a Grizzly
frame, 28ft Log Bed with 4 sets of
800-315-9950 x606
bedding. - Item ID-12284 - Tom
knife sharpener, conveyor and
800-315-9950 x604
forage box - Item ID-12796 - Chris 800-315-9950 x600
ROLLING STOCK
bunks - Item ID-12602 - Richard
SAWMILL
(8 Models)
12', 20' and 30'
800-315-9950 x606
1984 Lane Model 8400 Saw Mill
Gruendler Pulverizers - We have
1997 Ford Tree Trimming Truck
- Heavy duty four 14’ (4) head
three (3) available. - Item ID-
- 99,572 miles, Altec Boom, 5364
table w/ a top saw. Silvatech
12918 - Richard 800-315-9950 x606
36’ x 8’ 3 strand Green chain
hours - Item ID-12605 - Richard
Set works and has 45-50 foot of
Wood-Mizer LT-40 - Very nice. No
with stops, 2hp 3phase electric
800-315-9950 x606
track frame. Surprisingly good
leaks. Only needs muffler. Good
motor - Item ID-12596 - Richard
2001 Sterling Clean Up Truck
condition! Great Value at this
working machine running today.
800-315-9950 x606
with a Serco Loader - 2001
price!! - Item ID-12689 - Tom 800-
- Item ID-12982 - Richard 800-315-
42’ x 8’ green chain - 42’ x 8’
Sterling Clean Up Truck with
315-9950 x604
9950 x606
green chain with drives included
a Serco Loader, 190,000 miles,
1989 Wood-mizer LT-40 - 25hp
- Item ID-12600 - Richard 800-315-
engine, blade sharpener, blade
2011 HWP Shaving Mill - 24”x48”
9950 x606
9950 x606
alignment tool, lots of extra
box, pto drive, 15 to 20 cubic
80’ x 8’ 3 strand green chain with
2005 Kenworth T-800 with
blades - Item ID-12869 - Richard
yards per hour, 20’ Loading
drive included - Item ID-12590 -
Rotobec MT27 Loader - One
800-315-9950 x606
conveyor, 1 head 12 knives,
Richard 800-315-9950 x606
39 n
The Original Lumberman’s Exchange
SHAVING EQUIPMENT
TRANSFER DECKS
- Item ID-12593 - Richard 800-315-
Visit us online at www.LBXonline.com!
The Lumberman’s Exchange Post Office Box 1916 Columbia, Tennessee 38402
PRSRT STD. U.S. Postage PAID Permit No. 212 Pulaski, TN
Superior finished product control for biomass fuel, colored mulch, animal bedding, and other wood fiber commodities.
Electric or Diesel 150 - 875 Horsepower Portable, Stationary, or Track
Trust your wood fiber resources to the “Perfect In One Pass” TM advantage.
Rotochopper, Inc. | 217 West Street | St. Martin, MN 56376
-66 B k c lly Tra t Do w r e o N sp ran T with
40 n
The Original Lumberman’s Exchange
Visit us online at www.LBXonline.com!