PLEASE NOTE
All of our lighting is carefully inspected and electrically tested prior to shipping. Once received, we ask that you please inspect thoroughly—prior to installation—for any physical defects which may have occurred during shipping. Lighting that has been installed is not eligible for return or exchange, and L’Aviva Home does not take any responsibility for any damage incurred during installation itself.
Please be sure, too, to note the maximum recommended wattage for your fixture when choosing a bulb; using higher wattage bulbs can short the wiring, and L’Aviva Home does not take responsibility for any damage incurred under these circumstances.
CAREFULLY REMOVE FIXTURE FROM PACKING MATERIALS
CONTENTS
• Rattan Shade and Fixture Assembly
• Mounting Cross Bar
• 8-32 Cross Bar Screws (2x)
• Wire Nuts (2x)
• Canopy
• Screw Caps (2x)
• Stem Assembly
• Coupling with Set Screws
• Bottom Finial Disk
• E26 Bulbs, A19 LED (3x)
INSTALLATION
1.This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
2. Turn off power to junction box before installing.
3. Feed wires from fixture body up through stem assembly with stem coupling end up.
4. Thread stem assembly into coupling on ffixture body and secure with set screw (in coupling)
5. Slip canopy over stem assembly and rest on top of coupling on fixture body.
DATE 10.13.22
FIXED LENGTH
6. Thread (2 provided) 8-32 Screws in to bracket bar and lock with (2 provided) 8-32 screw caps
7. Thread bracket bar (with screws installed pointed down towards fixture body) onto stem assembly and secure with (1 provided) lock washer and nut.
All of our lighting is carefully inspected and electrically tested prior to shipping. Once recieved, we ask that you please inspect thoroughly - prior to installation - for any physical defects which may have occurred during shipping. Lighting that has been installed is not eligible for return or exchange, and l'aviva home does not take any responsibility for any damage incurred during installation itself.
8. Raise fixture and secure bracket bar to junction box with (2 provided) 8-32 screws.
CAREFULLY REMOVE FIXTURE FROM PACKING MATERIALS.
INSTALLATION:
9. Attach ground wire to green ground screw on bracket bar.
1. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
10. Perform wire makeup using (2 provided) wire nuts - ensuring proper polarity.
2. TURN OFF POWER TO J-BOX BEFORE INSTALLING.
11. Recess wire connections within junction box.
3. FEED WIRES FROM FIXTURE BODY UP THROUGH STEM ASSEMBLY WITH STEM COUPLING END UP.
12. Raise canopy and secure in place with (2 provided) lock balls.
4. THREAD STEM ASSEMBLY INTO COUPLING ON FIXTURE BODY AND SECURE WITH SET SCREW (in coupling).
13. Locate bottom finial disk and thread onto 1/8 IPS at bottom of the fixture until snug.
5. SLIP CANOPY OVER STEM ASSEMBLY AND REST ON TOP OF COUPLING ON FIXTURE BODY.
6. THREAD (2 provided) 8-32 SCREWS IN TO BRACKET BAR AND LOCK WITH (2 provided) 8-32 LOCK NUTS.
14. Install (3 provided) 8-9 watt, E26, LED bulbs. (60 watt incandescent equivalent) Then supply power to the fixture.
7. THREAD BRACKET BAR (with screws installed pointed down towards FIXTURE BODY) ONTO STEM ASSEMBLY AND SECURE WITH (1 provided)LOCK WASHER AND NUT.
8. RAISE FIXTURE AND SECURE BRACKET BAR TO JUNCTION BOX WITH (2 provided) 8-32 SCREWS.
9. ATTACH GROUND WIRE TO GREEN GROUND SCREW ON BRACKET BAR.
10. PERFORM WIRE MAKEUP USING (2 provided) WIRE NUTS - ENSURING PROPER POLARITY.
11. RECESS WIRE CONNECTIONS WITHIN JUNCTION BOX.
12. RAISE CANOPY AND SECURE IN PLACE WITH (2 provided) LOCK BALLS.
13. LOCATE BOTTOM FINIAL DISK AND THREAD ON TO 1/8 IPS AT BOTTOM OF FIXTURE UNTIL SNUG.
14. INSTALL (3) 8-9 WATT, E26, LED LAMPS (2 provided) (60 WATT INCANDESCENT EQUIVALENT) THEN SUPPLY POWER TO THE FIXTURE.
DATE:
8-32 SCREW (TO CANOPY)
8-32 SCREWS (TO 'J' BOX)