C APA PENDAN T
2 1 2 . 6 2 5 .9 6 0 5
INSTAL L INST R UC T ION S
ST U D I O @ L AV IVAHOM E.C OM
FI X ED LENGTH
PAGE 1 OF 2
DATE 10.13.22
5"
PLEASE NOTE All of our lighting is carefully inspected and electrically tested prior to shipping. Once received, we ask that you please 1/2" inspect thoroughly—prior to installation—for any physical
defects which may have occurred during shipping. Lighting
CANOPY MATERIAL: BRASS TEXTURE: RADIAL GRAINED FINISH: SATIN CLEAR COAT
18 1/2" VARIES WITH OAD
that has been installed is not eligible for return or exchange, and L’Aviva Home does not take any responsibility for any damage incurred during
NTING: installation T TO 4" J-BOX UD RING
itself.
2-1/2"
Please be sure, too, to note the maximum recommended
wattage E WEIGHT (EST.): VARIES DEPENDING VERALL DROP wattage
for your fixture when choosing a bulb; using higher
35" OAD
STEM ASSEMBLY MATERIAL: BRASS TEXTURE: RADIAL GRAINED FINISH: SATIN CLEAR COAT
bulbs can short the wiring, and L’Aviva Home does
9 1/2" VARIES WITH OAD
not take responsibility for any damage incurred under these circumstances.
Y VOLTAGE: AC
E CIRCUITS:
CAREFULLY REMOVE FIXTURE FROM PACKING MATERIALS
E CONDUCTORS: -1 #18-2 CLEAR SILVER NED GROUND
FRONT VIEW
TYPE: W LED, E26, A19 QUIVALENT
7"
CAPA DIFFUSER MATERIAL: LEATHER COLOR: AS SPECIFIED
CONTENTS •
G: Y LOCATION•
SIDE VIEW
INSTALLATION
Leather Shade and Fixture Assembly Universal Cross Bar
•
8-32 Cross Bar Screws (2x)
•
Wire Nuts (2x)
•
Canopy with Screw Collar
•
Upper Stem Assembly with Hang Straight
•
Lower Stem Assembly
•
Brass Connector Ring
•
E26 Bulbs, A19 LED (3x)
HALF BALL 1. This product must be installed in accordance with the applicable MATERIAL: BRASS TEXTURE: RADIAL GRAINED installation code by a person familiar with the construction and FINISH: SATIN CLEAR COAT
operation of the product and the hazards involved. 2. Turn off power to junction box before installing.
3. Thread 1/8 IPS x 1-1/4" Nipple (1 provided) in to top end of Hang Straight, then thread Hang Straight on to Upper Stem Assembly. Unthread Screw Collar and slide down Upper Stem to rest on chain loop. 18"
BOTTOM VIEW
4. Slip Canopy over Hang Straight and down Upper Stem to rest on screw collar. (take care to not scratch stem). 5. Thread Bracket Bar onto Hang Straight and secure with Lock Washer and Nut.