Refurb Renovation News - Issue 50

Issue 50 2021

Bond It: Safe in the knowledge A GUIDE TO FLAT ROOF REFURBISHMENT NORTHAMPTON MUSEUM & ART GALLERY OPENS FOLLOWING EXPANSION & REFURBISHMENT

Shackerley’s SureClad® Provides a High-Class Modular Solution For Gresham St Paul’s

£5.6 MILLION REFURBISHMENT COMPLETED AT BILLESLEY MANOR HOTEL & SPA

Vicaima: Driving security forward with the complete package

Specify CFA members and

Specifying a CFA member for your next flooring project could mean the difference between success — or a flooring failure. Most of the UK’s largest and best known Manufacturers, Distributors, Contractors and Consultants are CFA members — and for good reason.

• CFA members promote high standards, knowledge and expertise • Specifying CFA members will maximize your investment and minimize costly flooring failures • All members have to pass a vetting process

Image kindly supplied by Gerflor Ltd

Tel: 0115 941 1126

Image kindly supplied by Junkers Ltd

www.cfa.org.uk Email: info@cfa.org.uk

Image kindly supplied by Interface

04

STRUCTURAL GLAZING RAISES THE ROOF AT FAMED PERFORMING ARTS SCHOOL

25

DESIGNING FOR BUILDING COMPLIANCE USING DELTA MS 500 FIRE RETARDANT, TYPE C WATERPROOFING MEMBRANE

08

FORMER BHS STORE DEVELOPMENT PLANS REVEALED

32

OPTELMA’S BESPOKE LIGHTING EXUDES OPULENCE AT THE WHITE HALL, HARRODS

09

BRAND-NEW ACADEMY COMPLETION BRINGS 1,150 NEW PUPIL PLACES TO BIRMINGHAM

34

LANDMARK CLIFTON VILLAGE DEVELOPMENT NOW COMPLETE

12

LEGAL & GENERAL MODULAR HOMES OPENS SELBY SHOW HOMES TO PUBLIC

35

CLIVEDALE LONDON SECURES PLANNING FOR 20 CARLTON HOUSE TERRACE, ST JAMES

14

VELUX® INTRODUCES A NEW GENERATION OF GLASS ROOFLIGHTS FOR FLAT ROOFS

36

NORTHAMPTON MUSEUM & ART GALLERY OPENS FOLLOWING SIGNIFICANT EXPANSION & REFURBISHMENT

16

THE IDEAL SETTING FOR A WEDDING CEREMONY MADE MORE PEACEFUL WITH SECONDARY GLAZING

38

TR STUDIO REIMAGINE A LONDON APARTMENT INTO A LARGE, MODERN, MINIMALIST FAMILY HOME

17

DRIVING SECURITY FORWARD WITH THE COMPLETE PACKAGE

40

GUTTERING – A PROPERTY’S FIRST LINE OF DEFENCE AGAINST THE ELEMENTS

19

COUNTRYSIDE RUSTIC: HAVWOODS PROVIDES OLD OAK HOUSE WITH BESPOKE WOOD SOLUTION

44

SHACKERLEY’S SURECLAD® PROVIDES A HIGH-CLASS MODULAR SOLUTION FOR GRESHAM ST PAUL’S

20

BOND IT: SAFE IN THE KNOWLEDGE

46

£5.6 MILLION REFURBISHMENT COMPLETED AT BILLESLEY MANOR HOTEL & SPA

Contents Lapthorn Media Ltd

Editor Maria Lapthorn editor@rrnews.co.uk

Designer Laura Whitehead laura@rrnews.co.uk

Editorial Assistant Francesca Amato editorial@rrnews.co.uk

Website Content Russel Goldsmith russel@lapthornmedia.co.uk

Editorial Assistant Georgina Baxter georgina@rrnews.co.uk

Circulation Manager Leo Phillips subs@rrnews.co.uk

Tel: 01843 808 102

Sales Manager David Valentine david@rrnews.co.uk

Accounts Richard Lapthorn accountsdept@rrnews.co.uk

www.rrnews.co.uk

Sales Assistant Jane Parker jane@rrnews.co.uk

Publishing Director Paul Attwood paul@rrnews.co.uk

5-7 Ozengell Place Eurokent Business Park Ramsgate CT12 6PB

E

Issue 50 - 2021

very effort is made to ensure the accuracy and reliability of material published in Refurb & Renovation News however, the publishers accept no responsibility for the claims or opinions made by advertisers, manufactures or contributors.

No part of this publication may be reproduced or transmitted in any form or by any means, mechanical, electronic (including photocopying) or stored in any information retrieval system without the prior consent of the publisher.

Project News for us was to respect the architectural history and coherence of the campus while also creating a new space with its own identity. To inform the decisions made in this project, we worked closely with the client to establish a design code, based on a detailed understanding of the many complex layers of the building, that would allow our intervention to coalesce and unite its existing features.

“The effect of the rooflight is to transform what was previously a linking outdoor area into a flexible, beautiful space that the institute will be able to use for a host of different purposes for years to come. The Pilkington Planar™ system with its inobtrusive countersunk flush stainless steel point fixings, along with the structural glass fins, allowed us to achieve our aims with minimal aesthetic impact on the much-loved character of the existing building.”

Outstanding performance

STRUCTURAL GLAZING RAISES THE ROOF AT FAMED PERFORMING ARTS SCHOOL The prestigious Liverpool Institute for Performing Arts (LIPA) has created a new performance space by enclosing an outdoor courtyard using a large, structurally glazed rooflight.

RRNews - Issue 50

E

04

stablished by Sir Paul McCartney and co-founder Mark FeatherstoneWitty in 1996, the institute was created following a multi-million-pound refurbishment of a grammar school attended by the former Beatle in the 1950s, the Liverpool Institute High School for Boys.

Here comes the sun

Today it is one of the preeminent performing arts higher-education institutions in the UK, with almost 1,000 enrolled students, many of them from countries around the world.

This avoided the need to use any steel elements in order to deliver maximum light transmission and clarity, and also to complement the aesthetics of the wider building.

The 160sqm new space will allow students to host dramatic, musical and dance performances using the facades of its existing buildings as a backdrop, while also benefitting from the large amount of natural light that floods the courtyard.

Architect Maggie Mullan explained how the glazing system helped achieve the design vision for the space. She said: “LIPA is a cherished place, and one with a complicated construction history going back to the creation of the original school building in 1837. One of the key challenges

The rooflight was created using the Pilkington Planar™ structural glazing system, employing a series of four toughened and laminated glass fins to transfer the weight of the glass to the surrounding structures.

In order to deliver the required structural strength and energy performance, the roof glazing itself was made up of double glazed units featuring 10 mm thick Pilkington Suncool™ 66/33 THS outer pane with a 16 mm wide air-filled cavity and an inner pane of 13.5 mm-thick laminated glass.

For extra safety, all the glass was toughened and heat-soak tested (THS). The horizontal fins are made from the Planar™ | SentryGlas® System, which offers increased strength and durability.

Phil McKibben, head of special projects at RED Systems said: “The location of the rooflight in the centre of the building meant accessing the site was an interesting challenge and we worked closely with Aztec to plan the installation and safely hoist the glass over the surrounding buildings to create this fantastic finished structure.”

Gary Stonelake, business development manager at Pilkington UK said: “The Pilkington Planar™ structural glazing system allows architects to design buildings with reduced sight lines for highly attractive environments with more light and a greater feeling of space. This can be achieved without compromising on the structural and thermal performance of the system. The Pilkington Architectural design engineers worked closely with our accredited installer to meet the client’s expectations in this building that once housed the old school of singer and song writer Paul McCartney of the world-famous rock group, The Beatles.”

The glass also delivers outstanding energy performance, thanks to use of Pilkington Suncool™ coating. This improves the temperature control of the building in respect to heat loss or gain through the glass, and maximises natural light entering the internal space to help reduce the need for artificial lighting creating a comfortable controlled environment.

LIPA counts many high-profile names among its list of patrons, including Sir Richard Branson and Dame Judi Dench and its alumni include actress Liz White, West End director Jamie Lloyd, producer Mike Crossey and rock band the Wombats among many others.

Project News Project: New courtyard glazing at the Liverpool Institute for Performing Arts (LIPA) Client: LIPA Main contractor: Aztec, Liverpool Architect: Maggie Mullan Architects Installer: RED Systems

MODULAR HOUSE BUILDER SECURES COUNCIL FRAMEWORK APPOINTMENT Lewes District Council has appointed Boutique Modern to a four-year framework agreement (value up to £110m) to deliver hundreds of council homes across the district and more widely in East and West Sussex. The announcement follows a competitive tendering process and establishes a framework that other councils in East and West Sussex and Brighton & Hove can take advantage of.

F

Founded in 2009, Boutique Modern specialises in high-quality, sustainably built, affordable housing that is manufactured offsite at its factory in Newhaven before the completed homes are transported and installed on-site, reducing the impact on the environmental and buildtime of developments, ensuring quality and certainty of cost.

framework is set to generate a multitude of employment and development opportunities for local people and local companies.

“There is no doubt that it is a very significant milestone for the district, that I believe will define a new and exciting era of council house building.”

Boutique Modern is currently the only certified B Corporation in the UK modular construction industry - B Corporations are businesses all over the world that meet the highest standards of verified social and environmental performance.

Councillor Zoe Nicholson, Leader of Lewes District Council, said: “Building more council homes that are sustainable and so much cheaper and greener to run is at the top of our agenda, as well as our determination to use council resources to create jobs locally and to support the district’s economy. This new

Dick Shone, Managing Director of Boutique Modern, said: “We’re delighted to have won this contract from a very competitive field of established and well-respected companies. The framework allows local authorities across Sussex to radically reduce the time and cost of housing procurement and offers guaranteed service

“We can now build on the great work we’ve already done over recent years, and further accelerate delivery and improve the quality of affordable homes for residents in Sussex.”

Framework agreements speed up the process for appointing a contractor and save significant costs by not repeatedly going through a lengthy tendering process.

Additionally, for Lewes District Council it underpins the Co-operative Alliance’s determination to partner with local businesses that employ local people, support local supply chains and utilise modern methods of construction.

Councillor William Meyer, Cabinet Member for Housing, said: “This is the latest of many steps taken by the Co-operative Alliance to find ways to help address the acute shortage of genuinely affordable council homes.

“We currently have 129 council properties either moving though the planning process, under construction or recently completed with local families living in them, and the prospect that this agreement will accelerate the development of many more, is hugely exciting.

“Boutique Modern has demonstrated a real commitment and belief in the same values that underpin the council’s focus on community wealth building and so I’m delighted we are partners on our mission to deliver more homes in the district.”

RRNews - Issue 50

With 46 employees, 21 of whom live in the Lewes district, Boutique Modern works closely with local employment and training organisations as well having a developed local supply chain.

levels, best value pricing and faster project completion.

05

Company News MULTI-MILLION-POUND INVESTMENT IN THE UTILITIES SECTOR Sunbelt Rentals has invested over four million pounds in essential and innovative equipment to support the day-to-day operations and growth of the utilities sector.

W

ater, Gas and Electric are essential to the running of the UK services network, as the UK’s biggest rental provider, Sunbelt Rentals are leading the way in supporting innovation in the sector.

of its kind and supports Sunbelt Rentals’ own sustainability strategy as a zero-carbon solution to welding PE pipe on site.

To support the RIIO GD2 gas replacement programme, Sunbelt Rentals has invested in £1.7 million alone in WASK, breathing apparatus and gas detection equipment.

Sunbelt Rentals continues to invest in butt fusion equipment for both the gas and water sections, and a further £800K has been invested in tracked & static auto butt fusion machines, further expanding their fleet – which is already the largest in the world!

They have also introduced battery powered electrofusion boxes, and now have the largest fleet of E-Fuze, the eco-friendly solution to welding PE pipe . E-Fuze is the first product

With the demand for electricity ever growing, as is the need for renewable energy sources, Sunbelt Rentals has also invested over £1.5million in essential equipment, including

over 20 new winches from Tracto-Technik and a major investment in cable drum trailers.

Brent Smith, Utilities Director for Sunbelt Rentals said: “We see it as our responsibility to drive equipment innovation in the utilities sector. Sunbelt Rentals has made a long-term commitment as part of our ongoing sustainability plans to introduce more greener, friendlier and efficient solutions for our customers and partners.

“Our investment helps our clients to deliver their projects and achieve their goals. Together we’re all working towards one common objective to reduce CO emissions and create a more sustainable environment for future generations”.

Brent further commented that this investment however, is nothing without the knowledge and experience of a dedicated team “Our specialist team work tirelessly to assure our customers have what they need when they need it. They advise customers on the best solution for the task, without this knowledge the advances in technology simply wouldn’t exist, and it’s our team that are supporting the industry to develop new specialist equipment”.

“Sunbelt Rentals has made a long-term commitment as part of our ongoing sustainability plans to introduce more greener, friendlier and efficient solutions for our customers and partners.“

CROWN PAINTS AMONG FIRST TO JOIN ARCHITECTURE INSPIRATION HUB Crown Paints has announced it is among the first brands involved in creating a new hub of inspiration in Manchester for architects and designers, opening in Autumn 2021.

T

RRNews - Issue 50

he business joins the new Material Source Studio with the aim of supporting architects and designers to create beautiful spaces using colour.

The business will use the studio to share its knowledge in specifying paint and colour expertise and showcase its services for architects and designers, including its bespoke specification service.

06

Crown Paints’ dedicated architect and design team, which aims to help support more designers, architects and specifiers in choosing the best paint for their work, will be heavily involved in the partnership. The team will work closely with the Material Source Studio, providing resources for visitors.

Crown Paints will also be involved in the range of events Material Source is planning for the space. As well as a monthly ‘maker in residence’ programme, which will provide a platform for emerging local talent, the Studio will also host Continuing Professional Development (CPDs) and seminars at its 100seat theatre and meeting areas.

The new studio, the first of its kind in the UK, will offer architects and designers an inspiration hub full of products and materials from global brands.

The 15,000 sq ft space in Manchester’s NOMA development is split across two floors, with a range of inspirational exhibits and interactive

displays. So far, 40 brands have signed up to share their expertise at the studio.

Katie McLean, Marketing Director at Crown Paints, said: “Our partnership with Material Source is a significant part of our continuous aim of collaborating with the architecture and design community. It’s a significant milestone for the B2B side of our business as Material Source allows us to champion Northern talent and the wider design industry.

“We have a diverse professional product range and service offering that’s been built up over years through our work with large commercial customers. From bespoke specification services to site surveys and one-on-one colour advice, our aim is to help architects and designers create beautiful and sustainable spaces.

“On top of this we’ve worked hard to create resources that help the community to choose the best coatings for the job – whether that be information on fire protection or how to make the most of our new colour scanning device, the Crown ColourKey. We’re looking forward to creating a programme of activity at Material Source to help showcase the potential of Crown Paints.”

UK Veneering – Decorative wood veneered panels made to order.

We can produce complete panels to order including cutting, shaping and lipping or we can veneer our customers own panels. Whatever your veneering need we can help.

Services • Grain matched panel sets • Short grain panels • Radial matched panels • Hardwood lippings • Marquetry and inlays • Hi quality veneered sheets made to order with consistent colour and grain pattern and defect free in standard and non-standard sizes 8x4, 10x4, 10x5, 8x6, 10x6 etc.

• Veneer backed flexi layons • Laser cut fretwork • 44mm and 54mm Doors

Veneers • We always keep a large stock of standard veneers from North America and Europe like Ash, Beech, Maple, Oak and Walnut.

• Figured veneers • Fumed (Smoked) veneers • Pre Dyed & Engineered veneers from Tabu and Alpi • 1.5mm extra thick veneers • Burrs • Bamboo veneers • South American, African and Asian veneers

UK Veneering Limited Unit 6a, Harding Way, Somersham Road, St Ives, Cambridgeshire, PE27 3WR T: +44 (0)1480 461188

info@veneering.com

www.veneering.com

Project News BEARD STARTS WORK ON £10M ST JOHN’S COLLEGE HISTORIC LIBRARY REFURBISHMENT Oxford-based construction firm Beard is set to start work on the third and final phase of a major refurbishment of an historic library, within the grounds of one of the UK’s most important architectural sites.

T

he family-run firm, which specialises in the education sector, will be onsite from this month at St John’s College, Oxford, to start work on the £10m project to refurbish the Old Library and Laudian Library located in the Canterbury Quadrangle.

The site is not only world famous as a seat of learning but also Grade 1 listed as it is one of the few remaining examples in the UK of the high baroque architectural style, dating back to the early 17th century.

Beard, which has won a number of contracts from the University of Oxford in recent years, was appointed due to the quality of work and faultless delivery for phase one of the project, and its track record in the wider education sector.

The final phase of work is expected to be finished by early 2023 and consists of

refurbishment of the College’s existing Laudian Library and Old Library, with remodelling of an area known as the Paddy Room under the Old Library.

The Paddy Room area underwent a refurbishment in the 1970s which will be removed as part of the new work, to reinstate the rooms that existed previously.

Dean Averies, Oxford Director for Beard, said the project would require a high degree of expertise and knowledge of working within unique buildings, which the firm is wellknown for.

He added: “This is an incredibly prestigious building to be working on and our previous experience of working on phase one of the refurbishment means we are well placed to complete the piece. As a construction firm we have always been very aware that a building is much more than just a building, they are

spaces for learning, working and living.

Generations of students and academics have formed an emotional attachment with this very important space, and it’s our job to ensure future generations do the same.

“Working on a Grade 1 listed site has its own challenges, and of course there are the ongoing restrictions due to the coronavirus. But we have a lot of experience of working on this kind of site in Oxford, and elsewhere. We have also established best practice to ensure all our sites are Covid-secure as wherever we work, we always want our people to get home safely.”

Zoe Hancock, Principal Bursar of St John’s College, said: “This is a very important project for St John’s College and a site which sits at the heart of the College. We’re pleased to see Beard back on site for this final stage of the Library project, following their successful work at a previous phase.

“A site of such national importance requires sensitive handling and a high calibre of expertise and quality of work which we are confident Beard will be able to deliver.”

FORMER BHS STORE DEVELOPMENT PLANS REVEALED Belfast-based Alterity Investments has revealed its redevelopment plans for one of most significant retail locations in Belfast.

F

ollowing the submission of the proposal of application notice to Belfast City Council, Alterity Investments has unveiled its plans to reinvigorate the former BHS store on Castle Lane as a new retail and leisure destination.

Belfast-based Like Architects who have over thirty years’ experience in retail, leisure, commercial, conservation and residential design have designed the plans proposed to Belfast City Council.

The company has exciting plans to refurbish and reconfigure the 70,000 sq ft site, with potential to subdivide the ground floor at Castle Lane into a number of retail units and for the upper floors to be used for a variety of purposes including a potential rooftop area for food and drink.

Subject to planning, it also hopes to visually improve the Castle Arcade area to make it more attractive by recladding the exterior of the building and constructing a new oversail section. The new façade has taken inspiration from the building’s past as the Gaumont Theatre.

Richard Faloon, Commercial Director of Alterity Investments, said: “We are delighted to reveal plans to help strengthen Belfast City centre’s offering with the redevelopment of the BHS site. We believe the site has the potential to regenerate the commercial and retail vibrancy of this critical section of the city.

“We hope to maintain and strengthen the distinctive position of Belfast city centre to enable it to perform its role as the primary shopping centre of the region to promote a sustainable, vital and vibrant city centre.”

The site has been vacant since August 2016 when retailer British Home Stores went into administration.

RRNews - Issue 50

Frazer Kidd has been retained as commercial agent for the property, which comprises three upper floors and a ground floor that opens onto Castle Lane, Castle Arcade and Cornmarket.

08

Alterity Investments was formed in 1975 and is a family-owned property and investment company. Operating throughout the UK, it has assets in excess of £100m spread across various sectors and owns several other buildings in central Belfast, including other retail sites on Castle Lane.

Its properties are situated in prime locations across the UK, with its client portfolio including companies such as Joules, Waterstones, Lloyds Bank, Starbucks, Costa, Greggs and Cotswold.

Project News EDMOND SHIPWAY APPOINTED TO DELIVER CENTER PARCS’ PROPOSED SIXTH UK HOLIDAY VILLAGE Leading construction consultancy Edmond Shipway is to provide project management, cost consultancy and mechanical and electrical engineering consultancy services for Center Parcs’ proposed sixth UK holiday village.

BRAND-NEW ACADEMY COMPLETION BRINGS 1,150 NEW PUPIL PLACES TO BIRMINGHAM

C

enter Parcs has secured an option agreement to acquire privatelyowned woodland at Oldhouse Warren in Crawley, West Sussex.

The 553-acre woodland has been identified following an extensive search thanks to its location south of London, supported by excellent transport links.

In keeping with Center Parcs’ other villages, the site at Oldhouse Warren is set to include lodges, a range of indoor and outdoor leisure facilities, a Subtropical Swimming Paradise, a variety of restaurants and shops, and an Aqua Sana Spa.

More than 1,000 new school places have been created in Yardley Wood, Birmingham thanks to the completion of a brand-new £19m secondary academy school.

Edmond Shipway will now be managing rigorous site appraisals and preplanning works to ensure that the woodland meets the specific requirements of a Center Parcs holiday village. As well as this, a programme of community engagement will be arranged with a view to submitting a formal planning application to the local authority in due course.

hrist Church, Church of England, Secondary Academy, which is due to welcome pupils from September, has been built by the Department for Education (DfE) to create an additional 1,150 school places for the region.

David Stevenson, managing director at Edmond Shipway, said: “We have enjoyed an incredibly close working relationship with Center Parcs for more than 20 years, and are thrilled to be building on our hugely successful track record in this sector through delivering services for its proposed sixth UK holiday village.

Designed by architecture firm CPMG Architects, and delivered by contractor Willmott Dixon, the new £19m, three-storey school includes facilities to accommodate 900 secondary level pupils, and a further 250 students in the sixth form. The new building comprises a pick-up and drop-off area for pupils, a sports hall, two full size football pitches and one FA standard 3G pitch.

“This swiftly follows our appointment to deliver the €85M expansion of the Longford Forest resort in Ireland, which will provide 200 new lodges and an extension to existing leisure and hospitality facilities, and further strengthens our position as one of the UK’s leading leisure and hospitality consultancies.”

C

Traditional materials have been used in a contemporary manner to create a clean and simple aesthetic, whilst providing robustness and ease of maintenance, including a concrete raft ground floor, traditional brick and block wall construction with a feature of render and façade cladding to express the academy’s identity.

Sara Harraway, director at CPMG Architects, said: “We worked very closely with the school while developing the design, establishing a design concept based around the Trust’s values and the school’s branding. This has seen the introduction of a neutral colour palette, interspersed with bursts of signature blue and yellow feature elements.

“The finished school has created a positive, bright, robust, attractive and nurturing environment for pupils, which will also promote a sense of calm and sophistication. Large, high windows have been integrated to optimise natural daylight – just one of many elements designed to promote positive wellbeing in all the building’s users.

The development is expected to cost between £350m and £400m and is set to create around 1,500 permanent local jobs when operational, plus a further 1,000 jobs during its construction.

Martin Dalby, CEO at Center Parcs, said: “It is really exciting to have identified a potential site for another Center Parcs village in the UK. The proposal we will be submitting will create a significant number of jobs and bring major benefits to the local and national economy.

“This announcement marks the first step of a long journey and there is still a huge amount of work to be done before we can submit a planning application, but we are delighted to be working with Edmond Shipway on this latest project and look forward to the excellent service its team will deliver.”

Edmond Shipway’s four core services – cost consultancy, project management, M&E engineering and sustainability consultancy – allow the practice to add value to all of its projects, and its specialist teams focus on individual markets to deliver industry-leading expertise and maximise efficiencies and results for clients.

“We’ve been really pleased to work closely with the Trust and contractors Willmott Dixon to bring this excellent development forward, creating more than 1,000 new school places in the local area, served by fantastic facilities to support the delivery of topquality education.”

RRNews - Issue 50

Dan Doyle, director at Willmott Dixon, said: “We’re so pleased to have worked with the Department for Education, the Trust and CPMG on the creation of this contemporary new school building. This school will not only meet local educational needs by increasing pupil places, but also enhance the surrounding area and create an outstanding school for Yardley Wood.”

09

Project News GUNNING LONDON TO RESTORE AND REVAMP CITY UNIVERSITY’S GREAT HALL Gunning London, the Chartered Building Company specialising in refurbishments for the Higher Education sector, has been awarded the contract to renovate City University’s Great Hall, part of their Grade II listed College Building.

B

uilt in the 1890s, the Great Hall is an integral part of City University’s history and has survived intact to the present day, in spite of post-WW2 reconstruction and a fire in 2001.

The interior is now being reconfigured to maximise the available space and to equip the facility with the latest technologies, whilst

improving the acoustics and lighting. The works will see the stage replaced with a raised access floor and will bring the speaker and presentation wall closer to the audience.

Improvements will also be made to the IT and AV equipment, and new energy-efficient LED lighting will be installed.

Matthew Nash, Business Development Manager at Gunning London, says that the project will restore some of the Great Hall’s lost beauty while bringing it into the 21st century: “To recover some of the grandeur of the space, we will accentuate the strong visual impact of the existing wooden design using light grey walls and up-lighting.

“At the same time,” he continues, “students will be able to learn in a modern environment with state-of-the-art tech and full data connectivity to every seat. This project blends the best of heritage and high tech.”

Having recently achieved UKAS accredited certification from Bluesky, Gunning London launched its own fire division, Gunning Fire, and this project includes an improvement to the existing fire strategy.

INNES ENGLAND COMPLETES DEAL AT LARGE CITY-CENTRE INDUSTRIAL ESTATE An established eight-acre city-centre industrial park has been snapped up following a multi-million-pound deal completed by commercial property agent Innes England.

B

ar Lane Industrial Park, located in Basford, Nottingham, features 10,497 sq. metres of industrial accommodation with over 20 tenants in situ.

Due to its popularity, the unique freehold opportunity eventually went to best bids and was secured by Meadow Lane Services Ltd, a well-established investor in the region.

RRNews - Issue 50

The industrial park, which will continue to be run as an industrial estate, proved to be highly attractive due to its underlying development potential for a mixed-use scheme. It is in a prime location within a 15-minute drive to the centre of Nottingham and is home to a number of existing local businesses, including shed, metal, fencing and insulation providers as well as other industrial suppliers.

10

Scott Osborne, director at Innes England who secured the sale said: “We are really pleased to have got this substantial deal over the line. It is a sizeable deal with well-established industrial accommodation and is in the perfect location close to the city centre. We received a lot of interest early on, due to the size and scale of the estate but I am now pleased it has been secured for a large amount and we wish Meadow Lane Services the best with the site moving forwards.”

hub to grow from and offer the space they need to help their business be a success.”

Dritan Skenderaj, director at Meadow Lane Services, said: “We are really pleased to have secured the site at Bar Lane Industrial Park. As well offering large industrial space, it is in close proximity to the city centre, and will certainly appeal to a number of businesses looking for somewhere new or to expand. We are excited to provide local businesses with an excellent central

Brett Artus, asset manager for the private vendor, said, “We are delighted with this result.

With our professional team at Innes England and Waymark we have worked hard to try and maximise the potential of this site and we are confident that Meadow Lane Services will make the most of that potential.

Matt Hannah, managing director at Innes England, said: “We have been advising on the site for some time with our development services reviewing the opportunity, the management team taking over the day-to-day operations and our agency team selecting active buyers with direct approaches leading to a successful sale.”

“Innes England and Waymark have provided considerable expertise in preparing the site for sale and managing a very well targeted marketing campaign. Their unrivalled local knowledge generated considerable interest and ultimately secured the sale. My client is very pleased and I would like to thank all involved at Innes England and Waymark for their professionalism and commitment throughout.”

Innes England and Heb Surveyors have now been retained by the purchaser to act as agents on the site and continue to let vacant units.

PARIS APARTMENT WARMS TO SPACETHERM® WALL LINER A classic Parisian apartment is benefitting from the thermal effectiveness of the introduction of the innovative ultra-thin Spacetherm® WL insulation.

Located in the 11th arrondissement in the heart of Paris on Boulevard Voltaire and overlooking the Place de la Republique, the two-bedroom, 135sqm apartment was built in the Hausmann style. Hausmann’s renovation of Paris was part of a major programme commissioned by Emperor Napoléon III in the late 19th century, resulting

“We are very pleased with the results and we noticed that when leaning up against the Spacetherm WL you can feel your back warm against the insulation.

The A. Proctor Group were extremely helpful in addressing all the questions from the architect and ourselves. They also provided comprehensive support and guidance to our builder on the installation.”

in the distinctive appearance of the wide avenues, parks and squares which have become associated with this beautiful city.

Property owner Keirnan Murphy has made a significant investment in the renovation of the apartment to improve overall comfort, energy efficiency and to reduce heating costs.

Keirnan explains, “The solid stone walls, whilst adding to the building’s charm, result in heating inefficiencies and higher heating costs. During summer the stone walls warm during the day, retaining and radiating heat throughout the night.

In winter, the solid walls cool down leading to a huge increase in heating costs.

We undertook lots of research on solutions for green and energy-efficient renovations. In the research, we considered products available within France and as well as those available internationally. The Spacetherm WL aerogel insulation from the A. Proctor Group was a perfect choice for the apartment. At just 13mm thickness, the Spacetherm WL fits inside the lip of our cornices, which average about 20mm. Typically the walls of these older properties are not completely flat and so the option of an ultra-thin insulation was critical. Most alternatives were thicker and would not have worked.

from the architect and ourselves. They also provided comprehensive support and guidance to our builder on the installation.”

Spacetherm WL is a high-performance laminate specifically designed to be fixed to the internal surfaces of existing solid walls without the need for mechanical fixings. Spacetherm WL consists of Spacetherm aerogel insulation blanket bonded to 3mm Magnesium Board (MgO), for use in applications where improved thermal performance is required with limited space.

Typically, a solid wall will have a U value of around 2.1 W/m2K. Following the application of Spacetherm WL, this can be reduced to around 0.8 W/m2K, dependent on the wall structure.

View more Case Studies on our website...

We are very pleased with the results and we www.proctorgroup.com noticed that when leaning up against the Twitter: @proctorgroup Spacetherm WL you can feel your back warm Email: contact@proctorgroup.com against the insulation. The A. Proctor Group were RRN116048 The Stonyard HP:RRN Quarter Page Template 4/2/16 16:40 Page 11 RRN116048 The Stonyard HP:RRN Quarter Page Template 4/2/16 16:40 Page 111250 872261 RRN116048 HP:RRN Page Template 16:40 Page 1 RRN116048 The Stonyard HP:RRN Quarter Page Template 4/2/16 16:40 RRN116048 The Stonyard HP:RRN Quarter Page Template 4/2/16 16:40 Page RRN116048 The Stonyard HP:RRN Quarter Page Template 4/2/16 16:40 Page extremely helpful4/2/16 in addressing all the questions Phone:Page +44 (0)1 RRN116048The TheStonyard Stonyard HP:RRN Quarter Page Template 4/2/16 16:40 Page 1 RRN116048 TheQuarter Stonyard HP:RRN Quarter Page Template 4/2/16 16:40 Page 1 RRN721006 A Proctor HP.indd 1

17/06/2021 10:50:18

RRN917065 The Stoneyard Half Page.indd11 1 RRN519075 The StoneHalf Yard HP.indd RRN917065 The Stoneyard Page.indd RRN917065 The Stoneyard Half Page.indd RRN917065 The Stoneyard Half Page.indd 11

RRNews - Issue 50

TheStoneYard.co.uk is your premier source for granite - we offer a full range granite products including setts, kerbs, posts, building and paving products at affordable prices as well as custom machined and polished items. All our high quality stone is quarried and fabricated in-house at our EEC approved quarry site in Portugal by our team of experienced stone masons. By buying from us you are choosing the ethical alternative to unregulated Chinese and Indian stone.

Granite setts 10x10x5cm £23 per m2 + VAT With nationwide delivery service.

11:22:01 07/09/2017 05/04/2019 08:51:42 11:22:01 07/09/2017 11:23:17 11:22:01 07/09/2017 11:23:17 11:23:17 11:22:01 07/09/2017 11:23:17

11

Latest News LEGAL & GENERAL MODULAR HOMES OPENS SELBY SHOW HOMES TO PUBLIC Legal & General Modular Homes announces that it has opened its brand-new modular show homes for the public to view at its Portholme scheme in Selby.

1

02 highly efficient homes have been built using precision engineering and high-quality sustainable materials from Legal & General’s modular factory in Sherburn in Elmet.

Delivering a mix of high-quality 2/3-bedroom houses and 1/2-bedroom apartments, it aims to enhance the urban fabric of Selby and create a thriving new neighbourhood in the heart of this historic market town.

The new homes at Portholme, which have been developed in partnership with Selby District Council, exceed nationally described space standards and have been carefully designed to achieve Energy Performance Certificate Standard A, currently only attained by around 1% of new homes. A combination of photovoltaic cells and high-quality build standards will bring significant energy savings for residents of the new homes. Materials are sustainably sourced and the sensitive landscaping at Portholme also adds to biodiversity.

The homes are located on Portholme Road in the heart of Selby town. Just a short stroll to the historic Selby Abbey and the town’s high street shops, supermarkets, traditional pubs and a lively selection of independent cafes and bars. Portholme’s at the centre of Selby life, and only a 10 minute walk from the railway station, with mainline trains to Leeds, York and a direct service to London.

up, and costs are driven down. Modular construction offers an impactful solution to the UK housing crisis, supporting UK jobs and helping to meet the Government’s objective to build more affordable carbon-friendly housing.

Together with this scheme in Selby and its other schemes in Bristol, Broadstairs and North Horsham, Legal & General Modular Homes’ pipeline is delivering 670 new homes.

The Portholme scheme includes up to 30% affordable housing and will showcase how innovation in the industry can bring a step change to UK residential development, whilst delivering a sought after place to live for a wide range of buyers.

Rosie Toogood, CEO of Legal & General Modular Homes, said: “Having seen these new homes being developed and built in our factory just up the road by local employees, it’s great to see th

With a standardised approach to manufacturing, quality, efficiency and productivity is driven

“em in place and becoming part of a community.

The show homes look fantastic and we can’t wait to welcome everyone to see the high-quality sustainable homes that we have created.”

DIY SOS BBC CHILDREN IN NEED SPECIAL HEADS TO HULL BBC One’s flagship property renovation show, DIY SOS: The Big Build, will head to Hull this September to take on a charitable build with BBC Children in Need for St Michael’s Youth Project in Hull, East Yorkshire.

D

RRNews - Issue 50

IY SOS: The Big Build BBC Children in Need Special (working title) will see the programme’s team of Mark, Chris, Jules, Billy and adventure playground engineer, John O’Driscoll, join with kind local tradesmen and volunteers to embark on a build that will improve the physical and emotional health and wellbeing of children and young people in Hull and the surrounding areas.

12

The DIY SOS team, with the help of trade volunteers, have big plans to transform an empty 2 ½ acre field into a purpose built ‘adventure camping site’ for St Michael’s Youth Project in Hull. For over 30 years, St Michael’s (St Mike’s) have been working with children and young people in Hull and surrounding areas to deliver a variety of activities that improve children and young people’s emotional and physical health and wellbeing whilst supporting them to build

their confidence and self-esteem and raising their aspirations for the future, encouraging them to reach their potential.

The project works with more than 500 children and young people who have little to no access to gardens or greenspaces, and through their programme of support gives them the opportunity to enjoy the benefits of, and learn from, the natural world. St Michael’s organise a small number of camping trips and residentials throughout the year at sites that are at least three hours away, which means that not all of the children they support are able to access them currently. Some also lack the confidence to be away from home overnight.

St Mike’s has been receiving funding from BBC Children in Need for several years. A three-year grant of £64,012 is currently being used to deliver The Eating Table project which delivers weekly activity sessions based around food

and healthy eating for children and young people and their families, which aim to help prevent hunger and encourage a positive relationship with food.

DIY SOS, along with local trades and volunteers, will transform the empty field into an outdoor sanctuary which will allow the children and young people supported by St Michael’s, and across Hull, to get close to nature and enjoy breaks from the inner city areas that they live in. The team will create: • • • • • • • • • •

A field kitchen to teach cooking and to cook A landscaped campfire A pizza oven An exterior covered classroom A circular mountain bike course, duel skill level about 1 km A bird watching tower A low walk rope An adventure playground A toilet/shower block ( maybe from donated containers) A storage unit for 20 tents / 20 bikes

The team would be immensely grateful for the following donations:

Latest News BATH PRESERVATION TRUST APPOINTS DESIGN TEAM FOR BECKFORD’S TOWER Bath Preservation Trust (BPT) has announced that architects Thomas Ford & Partners and quantity surveyors Stenning & Co have been appointed to lead the design work for the £3.3 million Our Tower project.

T

he Our Tower plan, which is funded

by Historic England and The National Lottery Heritage Fund, will address urgent repair and conservation works required to the almost 200-year-old Grade I listed Beckford’s Tower, that stands above the UNESCO World Heritage Site of Bath and is the only museum dedicated to William Beckford in the world.

Born in 1760, William Beckford was a colourful and controversial character. At just 10-years old he inherited his father’s fortune, which included the Fonthill estate and several sugar plantations in Jamaica. His wealth gave him the freedom to pursue his interests in art, architecture, writing and music.

In 1782, Beckford undertook a Grand Tour, which inspired his travel writing and passion for collecting which continued throughout his life - especially when exiled to Europe for 10 years following the exposure of his relationship with William Courtenay (1784).

In 1826 William Beckford commissioned an extraordinary landscape back home in Bath - a Garden between his Lansdown Crescent home and the retreat now known as Beckford’s Tower, where he could escape from the city within the natural environment. The Tower was created to house his library, art collection and every day Beckford would ride up there

• •timber, aggregates, steel containers, septic tank or treatment plant, solar panels, wind turbines, mountain bikes, tents, rope, outdoor furniture, play equipment and internal fit out of shower block and field kitchen.

Jo Lorenz, Project Lead at St Michaels Youth Project said: A lot of the work we deliver is focussed on delivery in the outdoors, as we know the value this has on young people’s lives. The pandemic has been a difficult time for all of us and it has had a huge impact on many of the young people. We know how important it is for the children, young people and families that we work with to be able to enjoy the outdoors in a place where they feel safe, so we are over the moon that the DIY SOS team are going to transform this space into somewhere which will have such a huge impact on our community and for all of the children and young people of Hull.”

from his home, accompanied by his pack of spaniels. This expanse became known as Beckford’s Ride, a mile of interlinked gardens.

Beckford’s Tower stands in an exposed location and, like many historic buildings, almost two centuries of exposure to weather, pollution, and the challenges of climate change, now threaten the fabric of the building.

There is now an urgent need for repair and conservation, particularly to address water ingress at high level within the belvedere & lantern. Beckford’s Tower was added to the Historic England ‘Heritage at Risk’ Register in October 2019.

Our Tower will bring new parts of the tower into use, and upgrade services and visitor infrastructure. BPT will also use the project as an opportunity to develop the visitor experience, engage wider audiences and reconnect the Tower with its lost landscape, through new experiences, interpretation, and access. A development grant awarded by the National Lottery Heritage Fund is also enabling Bath Preservation Trust to re-examine the way in which they share the story of William Beckford’s links to the transatlantic slave trade.

The project is scheduled to complete in winter 2023.

London based conservation architects Thomas

to relax in nature and play again after such a difficult year with little opportunity to socialise.

“We are so excited to be part of The DIY SOS team for what is going to be a truly magical outdoor build. Being able to play outdoors is proven to be essential to children and young people’s mental and physical well-being.

We know the re-vamped site will become a much-loved space in the heart of the community!”

John O’Driscoll, Adventure Playground Engineer on DIY SOS said: “This is an amazing opportunity to give these young people a place

Across East Yorkshire, BBC Children in Need currently funds 18 projects to the value of more than £977,000.

Stenning & Co – who are located in Bath - are led by Quantity Surveyor Adrian Stenning. Experts and specialists in building conservation work, Adrian has worked extensively with organisations including the Landmark Trust and the National Trust.

BPT Capital Works Director Simon Butler said “We are delighted to welcome Thomas Ford & Partners and Stenning & Co to the project.

Both bring huge conservation experience to this nationally important building, and we look forward to securing an exciting new future for this Bath landmark.”

Clive England said: “We are delighted to be involved with BPT’s Our Tower project. Beckford’s Tower is a unique building, in a spectacular setting, with a fascinating history – exactly the type of project that every conservation architect dreams about!”

Adrian Stenning said “I am very pleased to continue my relationship with the Bath Preservation Trust and in particular Beckford’s Tower with which I have been involved for over 20 years. I look forward to this opportunity to not just repair the Tower, but to also open up & show its’ story for a wider audience.”

Securing the Design team is just the start of this project, with urgent fundraising now needed to ensure vital conservation work to the building and landscape takes place, to ensure today’s visitors and future generations can continue to explore and enjoy this iconic Bath landmark.

DIY SOS charitable builds are hugely ambitious and rely on the generosity of trade volunteers and company donations and so is appealing for landscapers, gardeners and tradespeople to offer support with the transformation in September.

Those interested in volunteering as a professional trade or donating product to this ambitious charitable build should email: diysoshull@bbc.co.uk. There will be a Trades Day on Tuesday 17th August, those interested in attending must email the address above before attending.

The two week build will take place from Wednesday 8th – Thursday 16th September 2021. The programme will be broadcast in November 2021.

RRNews - Issue 50

Mark Millar, Build Manager on DIY SOS said: “DIY SOS always gets a great response in East Yorkshire, and we look forward to returning to work with this wonderful community on what is an inspiring charitable build, please join us.”

Simon Antrobus, CEO of BBC Children in Need said: “We’re delighted that our friends at DIY SOS will be in Hull this September for another spectacular Big Build BBC Children in Need Special. We have seen over the years how this programme changes lives, and we know that this one will be no different, leaving a lasting legacy and supporting children and young people to do brilliant things in Hull and East Yorkshire.”

Ford & Partners are led by Clive England, who brings over 30 years’ experience to the project.

Clive is Surveyor of the Fabric to Ely Cathedral, and Cathedral Architect to Sheffield Cathedral.

13

VELUX® introduces a new generation of glass rooflights for flat roofs offering unobstructed views and maximum daylight VELUX® announces its new range of glass rooflights for flat roofs; a new generation of innovative and highly competitive flat roof windows with a minimalistic glass-to-edge design, joining the existing portfolio of VELUX domes.

F

or the past 80 years, the VELUX Group has created better indoor environments by bringing daylight and fresh air into homes and other buildings all over the world. Adapting to the ever-changing needs of homeowners, VELUX is now launching a flat glass rooflight and a curved glass rooflight with a minimalistic and modern design. The unique and innovative rooflights provide undisrupted views of the sky while promising even more daylight and are a desirable statement piece for any contemporary home.

A unique new design of flat roof windows

RRNews - Issue 50

The new glass rooflights, fixed or electrically-vented, have a unique, glass-to-edge design which allow for 52% more daylight to enter the home compared to the previous generation of flat roof windows. Anti-heat and blackout blinds can be discreetly placed in the base unit construction

14

“Our new glass rooflights are designed to give people more of what they love in their homes: comfort, energy efficiency, maximum daylight, and fresh air. With more daylight, better indoor comfort, and seamless design, homeowners can bring more of the outside into their homes.”

between the lower pane and outer glass, so as not to compromise on daylight, design or views up to the sky when not in use.

“Our new glass rooflights are designed to give people more of what they love in their homes: comfort, energy efficiency, maximum daylight, and fresh air. With more daylight, better indoor comfort, and seamless design, homeowners can bring more of the outside into their homes.” explains Scott Leeder, Market Director for VELUX Company Ltd. Key benefits for homeowners Ideal for flat roof renovations and new build projects alike, the glass rooflights are a worth-while investment for homeowners looking for a state-of-theart finish to their home. With a hidden sash and slim frame, the rooflights achieve a modern aesthetic when installed. The curved glass rooflight also offers a clear view and drainage with the unique CurveTech de-sign.

The new generation of VELUX glass rooflights have excellent energy performance and optimal thermal insulation thanks to the ThermoTechnologyTM EPS insulation and low placement of the glazing unit.

Compatible with VELUX ACTIVE with NETATMO and VELUX App Control, smart home integration and control becomes effortless. In addition, the design has superb sound reduction

thanks to the double and triple-glazing options available which creates a quieter indoor climate.

The rooflights offer several important safety features. The laminated glass on the inside can resist significant breakage attempts and the outer glass is toughened making the roof win-dow resilient, even in the harshest weather conditions.

Key benefits for installers The rooflights come with a 10-year warranty, offering robust quality and ease to handle for installers. Enhanced installation features include: • Insert nuts for safe and hassle-free crane lifting to the roof • Pre-drilled holes and one torx size for all screws to save time • Solar-powered accessories without wires • Built-in motor and pre-paired wall switch and rain sensor for the electric variant • Pre-manufactured interior linings for a seamless finish inside the home • VELUX Rewards can be claimed on all flat roof windows, visit velux. co.uk/rewards for more information.

The indoor comfort and peace of mind which comes with any VELUX flat roof window makes the new generation product offering a market challenger and sets the course for the future of flat roof windows.

The flat glass roof windows are available from £626 excl. VAT and suitable for 2-15° roof pitches. The curved glass roof windows are available from £750 excl.

VAT and suitable for 0-15° roof pitches. To find out more information, visit velux.co.uk/products/flat-roof-windows

Doors, Windows & Fittings LOGO OPTIONS WITH 4 COLOUR BLUE 100/88/45/50 FAWN 40/45/50/5 LIGHTER BLUE 74/44/21/24 GREY 40% BLACK

GARADOR INTRODUCES NEW FGS 820 FRONT DOOR Garador’s FrontGuard front door range offers excellent security and thermal insulation, offering a great solution for all types of properties.

Now Garador has added a new model to its extensive collection of front doors, the FrontGuard FGS 820.

This new door model is designed to minimise heat loss and incorporates four large windows to allow natural light to flow in through the doorway, which is ideal for hallways that are deprived of natural light. The windows are all triple glazed and the door leaf is 65mm thick, filled with dense polyurethane insulating foam.

The door frame and seals have also been specifically designed to eliminate thermal bridges.

This FGS 820 also features 5-point locking and RC2 security equipment and comes in a selection of standard and custom door sizes up to 2250mm high.

Find out more about Garador’s complete range of front entrance doors at www.garador.co.uk or call 01935 443722.

RRN721022 Garador QP.indd 1

ROSSO TECNICA is our new and exclusive range of European inspired designer levers. Manufactured from Grade 304 stainless steel and finished in a new selection of stunning hard-wearing finishes, these levers are the perfect accompaniment to the latest trends in interior fashion.

AS PART OF OUR ONGOING COMMITMENT TO REDUCE OUR IMPACT ON THE ENVIRONMENT, THE ROSSO TECNICA RANGE IS SUPPLIED WITHOUT ANY PLASTIC PACKAGING. NO POLY-BAGS ARE USED IN THIS RANGE.

T : +44 (0) 1228 672 900 E : sales@zoo-hardware.co.uk W : www.zoohardware.co.uk Rosso Tecnica is part of Zoo Hardware Ltd.

17/06/2021 09:50:26

The Clement Conservation Rooflight Crafted by experts in steel fenestration and building restoration.

The Clement Conservation Rooflight is a replica of a Victorian original. Designed to lie flush with the roofline and in keeping with the character of your property, it is the only conservation rooflight that is available from stock in two profiles – for slate or clay tiles - to ensure the best finish.

Clement House, Haslemere, Surrey GU27 1HR 01428 643393 clementconservationrooflights.co.uk info@clementwg.co.uk

RRNews - Issue 50

superb conservation rooflights

15

THE IDEAL SETTING FOR A WEDDING CEREMONY MADE MORE PEACEFUL WITH SECONDARY GLAZING Deep in the heart of Reading, close to Reading Abbey in the county of Berkshire is the historic Reading Town Hall. This magnificent Grade II Listed building was built in phases between 1786 and 1897.

T

he main façade was designed in 1875 by renowned architect Alfred Waterhouse in the Victorian Gothic style; this particular area of the building is Grade II*. In 1943, the Town Hall fell victim to an air raid and suffered extensive damage, some of which was visible until 1990, when restoration work commenced on the building.

Following a major refurbishment in 2000, the Town Hall now houses the Reading Museum, a large concert hall, conference rooms and a café.

The Town Hall’s Grade II Listed facilities offer space for conferencing, weddings, parties, and Christmas events. One such area, the Registry Office’s Ceremony Room, in the Grade II* part of the building required better acoustic insulation on seven of the primary windows, to ensure minimal breakthrough of outside noise during wedding registries. As the building is Listed, the traditional single glazed sash windows were retained as an important architectural feature and secondary glazing was chosen as a way of dealing with mitigating noise from the busy thoroughfare.

RRNews - Issue 50

Selectaglaze worked closely with main contractor Lakehouse and Reading Borough Council to devise appropriate designs. These needed to be engineered to meet the acoustic requirements but also had to be as unobtrusive as possible.

16

Selectaglaze worked closely with main contractor Lakehouse and Reading Borough Council to devise appropriate designs. These needed to be engineered to meet the acoustic requirements but also had to be as unobtrusive as possible.

23 units were installed to seven enormous original windows in the Ceremonies Room. The very large gothic arched primary windows were just over four metres high, so had to be treated

with a combination of units to ensure the perfect acoustic insulation.

Each opening was treated with a combination of three or four transom coupled secondary glazed units, with a Series 42 curved fixed light system affixed at the top. The slimline Series 10 horizontal sliding units were specified for the lower units on the wider windows, whereas the Series 45 side hung casement was selected for the narrower windows. This ensured that sightlines from the primary windows were not compromised irrespective of their differing widths.

6.4mm acoustic laminate glass was specified for each and a cavity of 100mm from the original windows ensured that the secondary glazing units reduced noise levels by between 40-45dB. An additional benefit of this treatment was that the thermal controls were also enhanced, making the room warmer.

Secondary Glazing

For further information, please contact Selectaglaze on 01727 837271. Email: enquiries@selectaglaze.co.uk or visit: www.selectaglaze.co.uk

TM

DRIVING SECURITY FORWARD WITH THE COMPLETE PACKAGE

ABOVE

3-Point Locking on Portaro SBD FD30(S)

BELOW

Portaro SBD FD30S AC36 Inverse

If you were selecting a car for security reasons, would you be looking for one that just had 4 wheels, an engine and a door you could lock? No, of course not! You would rightly be interested in its overall performance, verified roadworthy tests, the quality of its components, not to mention other safety features and naturally its appearance and stylish kerb appeal.

S

electing the right Secured By Design (SBD) Doorkit is not dissimilar. It’s not simply a case of meeting the minimum requirement, with a piece of paper that says SBD Tested, anything will do! After all there is so much more to consider in the modern build environment, from fire rating to life cycle expectations and installation to design flexibility. Portaro SBD Interior timber Entrance Doorkits from Vicaima provides just that scope, with ease of assembly, quality materials, outstanding performance and design appeal as standard, all encased in one of the most comprehensively certificated products on the market.

Of course, one of the first considerations for any project or development is how will it look and will it fit in with the project design theme. Here the Portaro SBD system

LEFT

Portaro SBD FD30S AC35

provides a rarity in today’s somewhat limited market. With matching door, frame and architrave in a myriad of veneered, foil, laminate, paint lacquered and even special finishes, the Portaro system offers complete design freedom, so that performance does not equate to compromising aesthetics.

Beyond the finish itself, design configuration also offers flexibility, with a choice of either a conventional architrave or for a seamless face the Inverse system, where door sits flush with its surroundings.

All door systems incorporate a 3-Point locking system, handle and security escutcheon, together with an automatic dropseal.

Returning to our choice of car for a moment, another prerequisite in any purchasing decision, would be to lift the bonnet for a peak at the engine. Obviously a little harder to do with doorkits, however it should be remembered that the important performance of any security door assembly is often not visible to the naked eye. Here again no ‘cutting corners’ or ‘good enough’ criteria are employed when manufacturing a Portaro SBD Doorkit. The doors themselves are constructed with heavy duty and highdensity cores, surrounded by double timber rails on all sides, complete with hardwood lippings. Furthermore, the frames are made from hardwood and come pre-fitted with fire, smoke and acoustic seals.

From the installers perspective, the Portaro SBD System really is the complete package.

Supplied as doorkits for ease of fitting on site, the carefully and separately wrapped doors come pre-machined with all primary components, alongside the boxed and matching frame / architrave sections with simply connecting parts and screws. All designed for easy and rapid assembly.

There are so many reasons why Portaro SBD Doorkits offer the ideal entrance security solution, of which these are just a few: Certified Secured by Design with dual scope Fire and Security certification Sound reduction performance with Acoustic AC35 and AC36 options Completely matching door and frame surround Ease and speed of assembly on site Quality components and construction FD30 to FD60 Fire Rating SBD Inverse Model

• • • • • • •

For anyone looking to move out of first gear when it comes to security standards, then Portaro SBD Doorkits really are worth a test drive.

For further details download your copy of the new Portaro Brochure or visit the Vicaima website www.vicaima.com contact info@vicaima.com or Tel: +44 (0) 1793 532333

RRNews - Issue 50

Of course, one of the first considerations for any project or development is how will it look and will it fit in with the project design theme. Here the Portaro SBD system provides a rarity in today’s somewhat limited market.

With matching door, frame and architrave in a myriad of veneered, foil, laminate, paint lacquered and even special finishes, the Portaro system offers complete design freedom, so that performance does not equate to compromising aesthetics.

17

Events & Awards News CALEDONIAN TRIO OF SHORTLISTS IN CONSTRUCTION NEWS AWARDS Completing Sir Frederick Gibberd College during lockdown, landing a stream of major new offsite project wins and investment in digital construction have all secured Caledonian three shortlisted places in Construction News Specialist Awards.

component schools’ framework, Caledonian was awarded the 1700 place 8FE school and 500 place sixth form in Harlow, Essex, in 2020.

he judging team shortlisted Caledonian in the Offsite Specialist of the Year, Specialist Contractor of the Year (turnover over £25m) and Project of the Year by a Specialist Contractor (subcontract over £5m) categories.

The building was over 90% complete in Caledonian’s factory prior to delivery, which adhered to schedule even through Coronavirus lockdowns.

The project was completed on time and in budget earlier this year.

T

Judges at Construction News Specialist Awards recognised how, over the last five years, Caledonian has grown into one of the largest off-site manufacturing construction businesses in the UK with places on a number of key government frameworks and a secured order pipeline currently over £250m.

It was for work at the £29m Sir Frederick Gibberd College (SFGC) that Caledonian was shortlisted in the Offsite Specialist of the Year category.

As the first-place contractor on the Department for Education (DfE)

SFGC is the largest volumetric modular free school ever built by the DfE and the first full secondary school to be delivered full turnkey. Work by Caledonian involved full demolition of the existing school.

Caledonian has supported its impressive growth over the last few years by investing in being a digital-first business. This enables it to deliver value and quality to customers through the use of technology such as BIM, digital twin, Augmented Reality (AR) and Virtual Reality (VR). These facilitate streamlining and acceleration of customer projects as well as automation of design, production, and operational processes.

Paul Lang, Chief Executive Officer at Caledonian, said: “We are delighted to be shortlisted in three categories in this year’s Construction News Specialist Awards. Being shortlisted in all three is a testament to the strength of our team, investment in digital construction and track record of successful project delivery.”

Paul added: “We have ambitious plans for the future as we look to bring the benefits of our digitally-lead modular and offsite construction techniques to wider sectors of the market.”

The finals of the Construction News Specialist Awards will be held on Tuesday 19 October 2021 at The Brewery in London.

“We have ambitious plans for the future as we look to bring the benefits of our digitally-lead modular and offsite construction techniques to wider sectors of the market.”

BULL PRODUCTS PROTECTS RIVERSIDE LANDMARK 80 STRAND

MOORES SHORTLISTED FOR MADE IN YORKSHIRE AWARD Moores is pleased to announce that the company has been shortlisted for the Made in Yorkshire Manufacturer of the Year (over £25m) award.

Bull Products, a manufacturer of life-saving fire protection equipment, has installed its Cygnus 1 Wireless Alarm System at 80 Strand in London.

The former Shell-Mex building is currently undergoing a refurbishment project to provide 156,000 sq ft of flexible floorspace in this beautifully transformed building. 80 Strand will feature stunning art deco features complemented by light filled contemporary spaces with riverside views, in the heart of a world class cultural destination.

The Cygnus Alarm units have been installed to protect the building during the refurbishment project. Due to the nature of the project including the careful restoration of original art deco features, round the clock protection was required to ensure comprehensive safety of the site and its workers.

RRNews - Issue 50

Working in partnership with Trident Electrical, Bull Products provided Cygnus fire alarms, extinguishers and trolleys across different levels of the 12-storey building.

The Cygnus Alarm System was also required to interface with the permanent alarm system on site, ensuring that site workers were alerted to any risk of fire, 24 hours a day.

Matthew Trigwell, Sales Director at Bull Products says: “We’re thrilled to be working on this landmark restoration project in such an iconic location. Due to the heritage of the building, the project comes with its own challenges including the very important job of protecting the building’s original features. The installation of our Cygnus Alarm System has provided comprehensive security and peace of mind for the on-site team and those preserving this beautiful building.”

Grant Bedford, Director at Trident Electrical adds: “We have worked with Bull Projects on a number of restoration projects and knew the Cygnus Alarm System would provide the reassurance we required on site. The team is highly experienced and familiar with the logistical and technical challenges that come with working on high profile projects such as this one in a landmark location.”

For more information, contact Bull on 01432 371170, visit www.bullproducts.co.uk or email enquiries@bullproducts.co.uk

18 RRN721029- Bull Products- QP.indd 1

20/07/2021 11:28:48

F

rom humble beginnings in West Yorkshire, Moores has grown its business through hard work and innovation while always remaining connected to its 70 years of heritage in Wetherby.

Steve Parkin, CEO of Moores comments, “We are honoured to be considered for this prestigious

award. We employ more than 500 people and during the pandemic our forward-thinking adjustments to get people safely back to work were documented by the BBC. This, coupled with our sustainability initiatives, innovative designs launching this autumn, and ambition to continue to make Moores a fantastic place to work, means we are delighted to have been recognised for this award.

At Moores, we have always been proud of our Yorkshire roots and are pleased to be included in an event that celebrates the brilliant businesses that are thriving in this part of the country.”

The winners will be revealed at the awards dinner which will take place on Thursday 29th July at the Hilton Leeds City Centre.

This prestigious event celebrates Yorkshire and the Humber based companies for the world-class products that they manufacture locally and trade across the globe.

COUNTRYSIDE RUSTIC: HAVWOODS PROVIDES OLD OAK HOUSE WITH BESPOKE WOOD SOLUTION Located within the glorious British countryside is the magnificent Old Oak House project. This stunning rural property recently underwent a complete transformation with the help of Havwoods. Exuding a distinct yet raw aesthetic the interior is made up of beautifully bespoke elements that remain cohesive throughout the home.

Photography: Scopic

H

avwoods’ Fresco planks have been used across the kitchen cabinetry, the pre-finished engineered board has an abundance of character which adds enhanced depth and texture to the scheme.

For the floor, the designers selected Grove Character planks from the same collection to create a soft and continuous flow throughout the space.

With the help of Havwoods this beautiful Berkshire property has been transformed into a rural home with an abundance of rustic character.

View the products at one of our Havwoods showrooms: hvwds.co/showrooms www.havwoods.com info@havwoods.com +44(0)1524 737000

Ideal for high footfall areas, this ontrend product is an extremely durable choice. With its hardwearing properties and textured surface, the planks allow for a cohesive yet rustic-inspired scheme. Offset by the pine green paint finish, these Havwoods boards work perfectly to add character and warmth to the kitchen.

To complete the property, Flume Rustic from the Relik collection has been specified to create a striking wardrobe in the master bedroom.

With its weathered finish and raw surface appeal, the reclaimed planks work wonderfully as a stunning focal point. Neutral furnishings are paired with subtle pops of colour through bed linen to allow the beauty of the bespoke wardrobe to truly shine through.

RRNews - Issue 50

19

SAFE IN THE KNOWLEDGE EFFECTIVE PERFORMANCE IS EVERYTHING WHEN IT COMES TO FIRE SAFETY PRODUCTS. HOWEVER, WITHOUT KNOWING IT, MANY OF US COULD BE MAKING COMPROMISES WHEN IT COMES TO OUR CHOICE OF FIRE FOAMS AND FIRE RATED SEALANTS.

A

s a company that manufactures sealants, adhesives and other building chemicals, you might expect us to advocate increased awareness when it comes to choosing fire foams. But self-gain never has, and never will, be Bond It’s main motivation for urging greater consideration when it comes to these products.

Instead we believe the building industry in the UK is affected by a serious issue with equally serious, and potentially life-threatening, implications.

With lives at stake, and against a backdrop where we are all increasingly accountable for our work and where they have been a number of high profile examples of poor building practices contributing to the spread of fire, we see it as our responsibility to share our knowledge.

The problem stems from the existence of too many different but similar sounding classification systems. This has created a degree of confusion which has left many in the sector at risk of inadvertently using fire foams with levels of performance that fall woefully short of the mark.

Not all fire foams are created equal Years ago specifying a fire foam was a lot simpler and arguably safer than it is today. You had the choice of either a standard foam or a fire foam with

The problem stems from the existence of too many different but similar sounding classification systems. This has created a degree of confusion which has left many in the sector at risk of inadvertently using fire foams with levels of performance that fall woefully short of the mark.

both types available in either a gun or handheld form.

To benefit from its classification, fire foam had to comply with BS476 part 20. This meant it would act as a barrier to fire for 4 hours giving a building’s occupants vital time to escape.

Then, with an influx of European foams into the UK came a proliferation of different standards. The most widespread was a German standard based on a sliding scale. This ranged from A1 (100% non-combustible) through to A2, B1, B2 and B3 with the latter offering the worst levels of performance.

If the introduction of a whole new standard system and a large number of differing classifications didn’t serve to create enough confusion, the way of assessing the UK and European standards was also totally different.

The UK standard meant a fire foam had to act as a barrier to prevent fire transferring from one room to another for a period of four hours. The German standard meanwhile was based on someone trying to ignite the foam itself - not a very realistic scenario.

Savings - but at what cost?

One of the most widely seen classifications people now find on fire foams is B2 and it’s not hard to understand why. B2 strikes a fine balance between offering some fire resistance and at a cost that won’t hurt budgets – or margins.

However, in our opinion, B2 ‘fire’ foam’s performance is totally inadequate and we don’t think it should be sold as fire foam at all. Yes, there are savings and profits to be made, but at the end of the day, what price do you put on property or even more poignantly, on someone’s life?

As we near the 4th anniversary of the Grenfell Tower fire, we are hoping lessons have been learnt.

Like most of our competitors, we react to market demand and do supply a B2 PU foam as part of our range.

However, we are strict about this not being referred to as a “fire” foam and it is not marketing under this guise at all. We clearly state what the products performance characteristics are and what it is tested to.

Sealants also play a big part in ensuring the integrity of fire resistant seals and joints. These are used in reestablishing the fire-rated integrity of a wall or floor assembly compromised by the inclusion or exclusion of a penetrant. Flames and smoke can spread through the smallest of gaps causing extreme damage to buildings and even human lives. Applying an intumescent sealant to linear joints, around pipes and between cables to close all the gaps and add fire resistance. An intumescent seal slows down the burning process and does not contribute to spread of flames.

Therefore, it can minimize the damage by protecting structures, giving fire fighters more time to arrive and take the fire under control as well as fireproofing escape routes allowing for efficient evacuation.

RRNews - Issue 50

How does intumescent sealant work?

20

Intumescent seals are known as means of passive fire protection, but what is an intumescent sealant in practice? Also known as expansion sealant, intumescent sealant expands when it becomes exposed to extreme heat and can swell up to 40 times its original volume. The sealant increases in volume but decreases in density forming a char layer. The expanded sealant does not actually catch fire, but the char

burns eventually, still much more slowly than most building materials. Depending on the product formulation, application and backing material, an intumescent sealant can be resistant to fire for up to 4 hours. Buildings require different levels of fire resistance depending on their size and whether they have a residential purpose.

Better safe than sorry Of course, it would be remiss of Bond It to highlight an issue as grave as current fire foam classification and misclassification without proposing a solution. Thankfully, there is one - and it’s also fairly easy to implement.

In its simplest terms, our advice would in every circumstance if you need fire protection from your foams nothing less than B1 is really acceptable as a bare minimum standard and for sealants we would recommend a fire tested sealant. Look for the standards EN1366-4, EN1366-3, EN ISO 10140-2 and EN13501-2 on packs - which are proof that the foams and sealants will do their job and you can be safe in the knowledge that you’ve chosen a true fire foam or fire rated sealant that will leave people safe in their homes, offices and other buildings.

For more information on Bond Its Fire Rated products contact our Sales Office on 01422 315300 or visit www.bonditgroup.com.

Intumescent seals are known as means of passive fire protection, but what is an intumescent sealant in practice?

Also known as expansion sealant, intumescent sealant expands when it becomes exposed to extreme heat and can swell up to 40 times its original volume.

QUALITY FORGED IN FIRE! Don’t risk your life (or anyone else’s) by using products which aren’t fit for purpose.

Our fire rated foams and sealants are tried and tested to EN1366-4, EN1366-3, EN10140-2 and EN13501-2.

SILICONES • SEALANTS • PU FOAMS • ADHESIVES • BUILDING CHEMICALS • TILE ADHESIVES & GROUTS • PLUMBING SOLUTIONS • BITUMENS

RRNews - Issue 50

Head Office: Unit G16, River Bank Way, Lowfields Business Park, Elland, West Yorkshire HX5 9DN Tel: +44(0)1422 315300, Email: salesuk@bonditgroup.com, www.bonditgroup.com

21

EMBODIED CARBON...THE ELEPHANT IN THE ROOM? The much anticipated consultation document ‘The Future Buildings Standard’ is provoking a mixed response from experts. Whereas the document proposes a welcome doubling down on the amount of energy used in a building during its lifetime operation, ‘operational carbon’s’ less headline-grabbing cousin ‘embodied carbon’ doesn’t even get a passing nod in the 114 page paper.

‘E

RRNews - Issue 50

mbodied carbon’ is a component of the total carbon consumed by a building; Before anyone moves into a new house, office or factory, a significant amount of energy has already been expended on the construction of the building including its components and their transportation to site. The proportion of ‘embodied carbon’ varies, but it’s estimated that on average the figure represents around 19% of the ‘Whole Life Carbon’ total building emissions; In turn the total carbon output from the nation’s buildings amounts to a sobering 42% of all UK emissions.

22

In the days before the oil crises and the introduction of Part L of the Building Regulations, embodied carbon would have barely notched a percentage point against the colossal expenditure of fossil-fuel derived energy powering our buildings. But as the ‘Regs’ continue to squeeze energy waste, embodied energy equally grows as a proportion of total carbon expenditure. As Part L cracks down further through the ‘Future Buildings Standard’, carbon emitted during construction will be hard to miss. The ‘elephant in the room’ will have to be confronted.

ABOVE Diagram showing the life cycle of construction materials, the CO2 arrows indicate the predominant effect on carbon contributions.

Historically just small changes in performance take time, commitment and legislation to happen.

Maybe in the scheme of things, the government whilst unofficially recognising the obvious importance of embodied carbon reckons that it’s already complicated enough just upping the weaponisation of Part L.

‘Embodied carbon’s’ omission from the consultation paper is therefore remarkable, given its increasing magnitude. Industry professionals have greeted the exclusion with concern: Architect Seb Laan Lomas, coordinator of the Architects Climate Action Network (ACAN)’s embodied carbon group, said the government had recognised the clamour for embodied carbon to be part of the Future Homes Standard (FHS) but that its response was inadequate. “The government shockingly fails to mention embodied carbon a single time in its own response,” he said. “The industry urgently needs greater commitment on this roadmap from the government, as in the absence of regulation, these upfront emissions continue to have a damaging toll.”

Other industry bodies including London Energy Transformation Initiative (LETI). Architects Declare (AD), UK Green Building Council (UKGBC) and the Alliance for Sustainable Building Products (ASBP) have echoed concerns about the omission of a mechanism to calculate embodied carbon including The RIBA president Alan Jones who has also publicly criticised the Government’s failure to include a requirement to calculate

the operational energy or embodied carbon of new homes within the proposals.

So what’s going on? Responses to the government’s proposals haven’t yet been published, but one leaked document from a large house builder provides a clue: in being less than enthusiastic about future standards, the company bleats out its standard old-chestnut faux consumer objection: ‘expensive’ energy conservation - but it goes on: “There is a lack of evidence to support the viable delivery of the future homes standard of 75-80% less CO2 emissions within the proposed timescale with existing skills training and supply chain availability.” They might have something - It’s been clear to all construction industry observers over the 50 years that training and knowledge have not kept up with the demands of evolving construction technology. The house builder probably knows best that its site employees and building designers are way behind in supplying the building performances expected of the proposed Part L changes. And that’s just Part L, the operational energy section. The company just says “Effectively we can’t do it”.

Sure, we’re tempted to treat that with a pinch of salt, but the industry is notoriously slow in changing direction.

Historically just small changes in performance take time, commitment and legislation to happen. Maybe in the scheme of things, the government whilst unofficially recognising the obvious importance of embodied carbon reckons that it’s already complicated enough just upping the weaponisation of Part L. A cynic also might also point out that it just can’t bring itself to deliver a more onerous message to the ‘put-upon’ developers -

Some natural materials can be carbon negative (some would say positive) in that they sequester more carbon than their production emits.

Think long term: Optimising the life cycle impacts for anything less than a 60-year span is not worthwhile. The building fabric is prone to decay if the structure becomes damp. The management and control of moisture in buildings is critical to their longevity. Consider breathability for both new and existing buildings, especially timber, and monolithic construction. Natural materials are breathable and offer a good solution to dealing with moisture.

This is particularly important in older buildings, because they were designed to be open to absorbing and releasing moisture.

Build in flexibility.

who maybe just happen to be amongst the current government’s main party donors!

The news that the consultation document ‘The Future Buildings Standard’ fails even to acknowledge the contribution of ‘embodied carbon’, will come as no surprise to seasoned industry observers. It follows a pattern of first climate change denial, a dragging of feet towards accepting first the problem and then the need to act to meet the government’s own carbon reduction targets.

Fabric first approach: Put simply, ‘let the building shell do the work’ allowing the structure, or fabric, to mitigate or massively reduce energy demand is the most efficient way to build after all the most carbon friendly energy is energy that is not used. Try to use materials that have low embodied carbon. Natural products, timber, wool, straw, hemp etc. act as a carbon store and are often manufactured using a low or renewable energy source.

ABOVE Fabric first principles, key to success is to adhere to the specified materials and design to help eliminate any performance gap.

Natural materials are breathable and offer a good solution to dealing with moisture.

One of Steico’s wood fibre insulation plants, production is large scale and highly efficient.

Timber is sourced locally and used to make rigid and flexible wood fibre insulation. Waste is used for renewable energy production.

BELOW

Include cost and not just price.

When assessing the cost of a material it is wise to include how the product is procured, installed (it may save time or eliminate the need for another product), its performance benefits and consequential savings such as reduced wastage or maintenance in other words it is a form of value judgement. Price is what you pay. Cheap now can be expensive later as you need to replace or repair more frequently, adding to your operational costs. Every time you replace or refurbish a material, you add carbon emissions to your building account.

Continued >>>

RRNews - Issue 50

It’s tempting to think that there might be a council of despair and disappointment, but that most certainly isn’t the case within the industry itself. News of impending climate disaster has been around for at least 4 decades already. There already exists a vast body of knowledge that has been built-up aimed at reducing industry’s reliance on fossil fuels along with a bag of other serious environmental concerns. It’s not hard then to find that non-governmental standards and initiatives exist outside of the ‘Westminster Bubble’ in pockets of construction where there operates a more aggressive call for sustainability.

Distilling key points for reducing carbon of both ‘operational’ and ‘embodied’ isn’t always easy, but a few points can be made as significant ‘takeaways’:

Tips and pointers for reducing embodied carbon in your construction projects:

This may be addressed by creating a building that is either highly adaptable or with elements that can be reconfigured or reused. There are many interesting ways of using natural materials whereby the building can be flexible. For example, super strong flax based partition systems (such as the Faay partition wall system) located using timber tracks can be relocated and re-used as can using timber joints that do not utilise glue or nails (e.g.

Brettstapel), therefore allowing the parts to be taken apart in future.

23

LEFT Sheep’s wool insulation being installed in a timber frame.

Increasing our use of natural materials will sequester carbon already released into the atmosphere, lower the carbon that is produced in material manufacture, and has the potential to optimise building lifespan in order to decrease the frequency of demolition and replacement.

BELOW Wood fibre products used on a refurbishment where a significant timber frame extension is added to an existing brick-built house.

Use multi-functional elements.

Increase the contribution of each element so that others can be removed. Avoid elements with limited value, e.g., ensure your internal layer can provide racking, airtightness and vapour control, or your insulation provides performance beyond minimum regulation U-values by offering other performance benefits such as vapour management or heat transfer delay, ensure that internal ceilings can provide acoustic, thermal and fire protection. For example, timber and straw modular systems can offer structure as well as excellent acoustic and thermal insulation.

Choose long-lived solutions for windows and roofing.

Investing in durable materials means fewer replacements over time, which means fewer carbon emissions, less waste generated, lower life-cycle costs and less tenant disruption. What is a durable and suitable material for your market varies depending on the conditions, however, the principle remains the same.

Value LCA’s and EPD’s.

Materials are a very important part of a building’s impact. A Life Cycle Assessment (LCA) assesses the environmental impacts of a specific material or product. This often takes the form of Environmental Product Declarations or EPDs and it basically means calculating the LCA of a product, from the extraction of the material through manufacture, use, replace or repair to disposal and recycling.

Building materials already contain embodied impacts when they are purchased and brought to the building site. Their production has caused certain gases to be released into the atmosphere, the transportation of the materials to the manufacturing facilities has caused other impacts, and so on. If an EPD of that material is available, it means that the lifetime impacts of the material have already been calculated and declared, and that makes it easier to calculate the environmental impacts of the building.

RRNews - Issue 50

Conclusion:

24

Reducing the amount of carbon generated by the fossil fuels we burn to operate our buildings is crucial, but it should go hand in hand with reducing embodied carbon. After all, while operational emissions can be reduced over time with building energy efficiency renovations and the use of renewable energy, embodied carbon emissions are locked in place as soon as a building is built or refurbished. Increasing our use of natural materials will sequester carbon already released into the atmosphere, lower the carbon that is produced in material manufacture, and has the potential to optimise building lifespan in order to decrease the frequency of demolition and replacement. Each individual, whether they be a homeowner, specifier, investor or construction professional, has the agency to make decisions to decrease embodied carbon. It is our responsibility; we have to act now.

About the authors: this article was written by ‘Ecomerchant’ and the ‘Architects Climate Action Network’ (ACAN) in response to our invitation to have their say in the conversation around embodied carbon and how to take action to reduce it.

Ecomerchant are an independent, employee-owned builder’s merchant supplying sustainable and natural building materials. Ecomerchant focus on ethically sourced, sustainable building materials and a fabric first approach to building. The environmental merits of every product are considered with Ecomerchant opting not to sell products which cause excessive environmental impact. The carbon footprint of materials is a critical component of this assessment where low carbon alternatives will always be preferred.

Ecomerchant are active members of ACAN.

Take Action: www.ecomerchant.co.uk The Architects Climate Action Network (ACAN) is a network of individuals within architecture and related built environment professions taking action to address the twin crises of climate and ecological breakdown.

The collective has three overarching aims: 1. Decarbonise now!

2. Ecological regeneration!

3. Cultural transformation!

Take Action: https://www.architectscan.org Additional resources: RICS Professional standard on Whole life carbon assessment LETI Embodied Carbon Primer RIBA 2030 Climate Challenge Plan Inventory of Carbon and Energy The UK’s Passivhaus Trust on EnerPHit And Retrofit

DESIGNING FOR BUILDING COMPLIANCE USING DELTA MS 500 FIRE RETARDANT, TYPE C WATERPROOFING MEMBRANE Paying attention to waterproofing products which offer protection in event of fire is not the norm. We hardly think of water management and fire in the same thought, however the benefits of doing so are not quite as crazy as it sounds.

T

he demand for sustainable, cost efficient building methods and materials is constantly increasing, as is the demand for safer building materials. The waterproofing sector should embrace and support the goal of creating healthy and safe living environments throughout the lifecycle of products.

There are many different design challenges experienced when designing a suitable, maintainable and capable waterproofing system. From existing basements to multi-level basements, basements which will encompass high water tables at some stage during their service life.

With Delta MS 500 Fire Retardant membrane it is now possible to specify a Type C, Cavity Drainage Membrane that offers not only protection from water or vapour ingress but also protection in the event of fire.

The Delta Fire Retardant range has been manufactured with DELTASAFE, a new innovative fire-retardant property which enables our MS 500 membrane to achieve a Euroclass rating of B-S2, d0 in accordance with EN 13501-1:2018 meaning it is now possible to specify a Type C Cavity Drainage Membrane that meets Meeting building requirements of today, but also that of tomorrow, without having to radically alter specifications.

A Type C Cavity Drainage System is a maintainable basement waterproofing solution suitable for new-build basements, refurbishment and retrofit projects. The Type C System comprises of a Cavity Drain Membrane, Drainage system, Submersible Package Pump and Control System. This type of system is designed to combat water ingress and can be used to habitable grades 1-3 in according to BS 8102:2009.

VIEW OUR PRODUCT DEMO: https://youtu.be/M71QdkUOnSg A Type C Cavity Drainage System is a maintainable basement waterproofing solution suitable for new-build basements, refurbishment and retrofit projects. The Type C System comprises of a Cavity Drain Membrane, Drainage system, Submersible Package Pump and Control System. This type of system is designed to combat water ingress and can be used to habitable grades 1-3 in according to BS 8102:2009.

The Delta Fire Retardant Type C Cavity Drainage System is the safest form of waterproofing system available, offering complete protection from water or water vapour and fire retardant protection.

Our Design and Build Philosophy is quality driven, working with architects and trades alike, putting at the forefront construction considerations to ensure buildability, functionality, and

maintainability. The result of this single approach is a consistent, complete, and quality design that is hard to equal.

The success of any project is highly influenced by the team tasked with delivering it, let our Technical Team assist in you in your successful project.

We don’t wait for problems to arise and then work to solve them; we identify them in advance and solve them before they become a problem.

Whatever the needs of your project, you can rely on our Technical Team to ensure you get the right advice, support and practical help at exactly the right time to keep you ahead of the competition. Call us today on 01992 523 523, email info@deltamembranes.com.

Visit our website here: www.deltamembranes.com.

RRNews - Issue 50

25

TAKE THE LEAD ON LEAD

Water supply replacement in under 2 hours

A

wareness of the potential health problems caused by lead in the water supply, particularly in infants and children is growing. Houses built before 1970 would have been constructed with lead water supply pipes and if still in place can be causing developmental harm to young occupants.

Although the use of lead in plumbing has been banned in the UK for more than 50 years, there are still many properties where a risk of lead contamination of water is a risk. In some areas of the UK up to a third of these older properties are still receiving their water through these original lead pipes.1

In properties with lead supply pipes, the only totally secure method to reduce lead levels in the water supply is to replace the original supply with modern plastic pipe. These new materials can also provide the additional benefits of improving flow rates and reducing pipe noise.

Traditionally, any lead replacement program requires major excavations outside a property and causes huge disruption within. Resulting in mess

and disturbance to householders over several days. This disruption has often been the cause of users’ reluctance to have the work undertaken.

“Lead Water Supply replacement has become a priority for water companies across the UK. Systems such as INSUduct® can overcome user reluctance and provide and time and cost-efficient methods of water supply pipe reluctance.”

Steve Leigh, Managing Director Groundbreaker

Replace lead water supply pipes in under 2 hours…no major excavations, minimal disruption.

An innovative solution to water supply pipe replacement which significantly reduces disturbance, time and cost is the routing of the new supply pipe up the external face of the building.

Traditionally, pipes needed to be within the thermal envelope of the building or buried to minimise the risk of frost damage and freeze thaw bursts. “We’ve been putting pipes in holes in the ground to protect them from frost for decades,” Steve Leigh, Managing Director Groundbreaker explained.

“Lead Water Supply replacement has become a priority for water companies across the UK. Systems such as INSUduct® can overcome user reluctance and provide and time and cost-efficient methods of water supply pipe reluctance.”

- Steve Leigh, Managing Director Groundbreaker “Although it works, today’s new materials allow for a much better solution.

Keeping pipes on the surface reduces the risk of leaks developing and allows for easy repair and maintenance. It’s just a must better method of working.”

The insulated ducting products are designed to provide long lasting and effective thermal protection to water pipes and fittings outside the thermal envelope of a building. To achieve the level of protection required by British Standard 5422 and all relevant Water Regulations for frost protection, the ducting must be carefully fabricated to provide long lasting protection and should be tested and approved to Water Supply (Water Fittings) Regulations, Regulation 4 or listed as an approved product by WRAS Approvals.

Easy installation, saving time and money.

Installation of a new supply using INSUduct® is straight forwards.

1. From the main service supply, run a single unjointed supply (up to 32mm OD), either at 750mm underground or insulated through SHallowduct® insulated ducting.

2. Cut a core (100mm OD) through the wall to point of delivery inside the property.

3. Line the core with twin wall ducting and insert SHallowduct®.

4. Slide the insulation and duct into the core and seal to comply with Building Regulation Part C section 5.2 This enables most water supply replacements to be completed within a couple of hours, without the traditional mess and disruption to the householders or occupiers. The improvement in work efficiency and reduction on the impact to occupants is a win for both contractor and customer. There is also little impact to the exterior appearance of the property, as the system provides a neat, clean finish to the job.

The use of insulated ducting also allows compliance with British Plumbing Employers Council (BPEC) best practice of joint free supply installation. In their recently launched Groundworker, Service Pipe and Meter Housing Installation Training the use of joint free installation is recommended and is recognized to minimize the risk of future joint failure and leaks.

In addition to providing a simple solution to lead free water provision, insulated ducting can be used in association with surface mounted meter housings. UK water companies are now trialing or, as in the case of Portsmouth Water, moving completely to surface mounted meter housings. “The surface mounted water management system houses the meter above ground, removing unsightly street furniture and allowing for easy meter reading.” Steve continued, “It also allows for future proofing the network, providing the option of the installation of ultra-smart (5G) two-way metering and ‘internet of things’ (IOT) technologies.”

Steve Leigh, Managing Director of Groundbreaker, has over 40 years’ experience in the Water Industry and is the developer of INSUduct® and all the Groundbreaker products. In 2018 Groundbreaker were recognized by the HBF (Home Builders Federation) as the Utility Company of the Year for their innovative range that meets the highest standards in both product specification and leak free installation design 1. https://www.lovemoney.com/news/19726/ the-most-common-home-insurance-claims.

For further details of installing Groundbreaker products go to https://groundbreaker.co.uk/how-to-guides/ Groundbreaker Systems, 3 Fairways, Stuston, nr Diss IP21 4AB Tel 01379 741993 Website: www.groundbreaker.co.uk

RRNews - Issue 50

The insulated ducting allows the new water service to be routed up the external face of the building and connected to the internal plumbing above ground level, whether this is the ground floor or upper storey. In multi-occupancy properties INSUduct® allows multiple supply pipes to be

installed, as it is designed to provide frost protection for up to three 32mm OD water pipes installed to the exterior of the building.

27

Feature RETHINK AND REUSE BEFORE REBUILDING, SAYS SUSTAINABLE CONSTRUCTION EXPERT The construction industry needs to rethink its approach to reusing and recycling buildings if it is to be seen as truly sustainable, according to a leading expert.

D

avid Cheshire, sustainability director for AECOM, told a recent webinar from property, construction and infrastructure consultancy Perfect Circle that reusing materials from demolition simply isn’t enough to offset the environmental and financial impact of acquiring them in the first instance.

Cheshire said: “At the moment, we as an industry dig, mine and process hundreds of millions of tonnes of raw materials that we essentially steal from the planet. There is a focus generally on reducing things like operational energy use, but around half of all greenhouse gas emissions come from mining and processing resources.

“We are also knocking down and demolishing buildings at a phenomenal rate, sometimes after only 30 years of use, so we’re losing at both ends of the scale.

“While we congratulate ourselves as an industry for reusing large amounts of the waste products from demolition, it’s not ‘recycling’ in the truest sense of the word as the products don’t maintain their value. For example, structural concrete doesn’t get recycled into use as structural concrete; it is downcycled to secondary aggregates like road base or piling mats. While this is reuse, it’s not giving us the materials back that we spent so much energy getting in the first place.”

Cheshire talked attendees through the basics of circular economy design principles for buildings and emphasised how its applications can improve sustainability throughout the supply chain.

“There are thousands of components that make up buildings, all of which have different lifespans, so the circular economy model needs to work differently for each layer.

“The foundations and structure of the building are long-life and should be around for a hundred years, but with the interiors, the thinking needs to be around reconfiguring for a new use rather than throwing everything out and starting again from base build.

“Building in layers also means that you can peel those layers off as uses change. If you’re converting usage from office to residential for example, you might want to replace the facade, but equally it is thinking about how you’re putting everything together – you don’t want to have an electrical component that lasts 20 years hidden behind a ceramic tile that has a 2,000-year life.

“If you can retain and refurbish a building and keep the main structure of it, there’s around a 50% reduction in embodied carbon over time in comparison to a new build, which is hugely significant.”

Among the examples given by Cheshire was the work being done as part of The London Plan, which has several policies relating to the circular economy in the built environment.

Cheshire said: “We’re working with the Greater London Authority on the inclusion of the circular economy in its wider plans. GLA policy now dictates that all referable projects much have a circular economy statement that sets out the project’s commitments against a series of targets.

“Our cities and buildings are a gold mine of resources. We spend so much money, effort and time in bringing these resources out of our planet and into our cities, only to downcycle them once their original use is exhausted.

“The circular economy goes hand in hand with the idea of urban mining and ensuring that we keep materials within the loop and reusing them to the best of our ability.”

WHY USE A BREATHABLE PAINT?

He said: “The current model the industry operates on is very much a linear approach – we win the resources, we use them, we throw them away and then the process starts over again. The circular economy looks to remedy this and find better, more sustainable ways of doing things. The core of the model is retaining, refitting and refurbishing buildings. There are a number of design principles that feed into this, chiefly the idea of building in layers.

Earthborn's Classic range of 72 shades Paint breathability measures how air and water vapour flows through its surface. Older properties were built using materials that were designed to promote this airflow.

Using paint with a high level of breathability, with breathable building materials, avoids moisture being ‘trapped’ beneath the surface of the paint. Trapped moisture can lead to damp walls, causing the paint to bubble, peel and eventually blow completely. It can also contribute to a harmful living environment.

RRNews - Issue 50

Earthborn Claypaint is a highly breathable paint, perfect for walls and ceilings where breathability is key. It’s thick and creamy with a high clay content, offering excellent coverage, no nasty paint smells and a number of eco properties.

28

There are two methods used to objectively measure breathability - the SD value and the MVTR value. Using either method, Claypaint is proven to have extremely high levels of breathability. More information on this topic can be found in the blog on the Earthborn website.

David Cheshire, sustainability director for AECOM

Ease of use, high covering power and lack of harmful emissions make Claypaint an ideal option to optimise breathability for any building.

Earthborn’s new colour card showing all 72 colours in the classic range is now available and100% recyclable, including the adhesive and the paint chips that use real Claypaint.

Website: www.earthbornpaints.co.uk

RRN5210006 Earthborn QP.indd 1

23/04/2021 18:19:40

Editor’s Choice Cinderella Incineration Toilets the Burning Questions Answered by LeeSan

What are they: Cinderella incineration toilets burn biological waste at high temperatures, leaving only an insignificant quantity of fine, harmless ash, amounting to the equivalent of about one teacup for four people during one week of use. The toilet may be used around 70 times before emptying is required.

Cinderella incineration toilets are currently installed by over 60,000 users worldwide.

How Do they work: Waste is burned in an integral combustion chamber. The harmless gases from this combustion are dispersed through a vent pipe. In contrast with other toilet systems, incineration toilets eliminate all waste on site without the need for connection to the main sewer or a septic tank.

Correctly used, Cinderella incineration toilets are odourless, hygienic and safe, providing a user experience similar to a normal domestic system. The user simply inserts a paper bowl liner, uses the toilet then presses a button or lever to evacuate and incinerate the waste.

Cinderella toilets are suitable for all ages including children.

Where can they be used: Available around the world for decades, incineration toilets are a commonly used alternative in residential and commercial applications without easy access to public utilities. These include mountain cabins, remote areas, tiny homes, off-grid structures, mobile homes, boats and many more. They do not require a water supply or septic system.

Power Requirement: Cinderella incineration toilets use either 240v electricity or gas as the combustion energy source.

LeeSan are the sole UK distributors for Cinderella Eco Solution incinerating toilets.

Phone: +44 (0)1295 770000 Website: www.leesan.com

RRN120074 Lee San HP.indd 1

NORCROS ADHESIVES ASSISTS WITH STUNNING CINEWORLD PROJECT Norcros Adhesives has been involved in an exciting project to replace the floor at a popular branch of Cineworld in Harlow.

The substrate of the existing tiled floor was an anhydrite screed, which had not been allowed to dry out properly prior to the laying of tiles and as a result these had failed to adhere properly, which was beginning to cause problems.

It was a £60,000 project for commercial interior specialists Bentley Rowe, who needed to completely strip out and re-tile the foyer area at the cinema. As an added logistical challenge, the management wanted to keep the cinema open, so hoardings were erected with extraction to minimize noise, avoid dust and keep customer flows going in the areas that needed to be kept accessible. The cinema is situated within a shopping centre, so any disturbance to neighbours had to be taken into account as well.

to determine the correct adhesive to use and produced a remedial M40 tiling specification.

The work involved correct preparation of the existing anhydrite screed and the removal of laitance and contamination from the surface of the screed by sanding and vacuuming. The surface was then primed, using progressively stronger coats of Norcros Prime Bond. The adhesive specified was Norcros Rapid Porcelain Grey S1 Tile Adhesive, with a joint width of 3mm. For grouting Norcros 4 Into 1 Wall & Floor Tile Grout was specified.

Norcros Rapid Porcelain S1 Tile Adhesive is a rapid-setting cement-based adhesive with a bed thickness of 2-10mm suitable for fixing porcelain and stone tiles to a variety of building surfaces. It features superior flexural strength, an extended open time, improved bed thickness and crack bridging properties, due to the polymer strand technology incorporated in the formula.

Norcros 4 into 1 Wall & Floor Tile Grout is a fine-textured, polymer-modified, anti-bacterial, rapid setting wall & floor tile grout for use in joints from 1mm to 12mm. It is suitable for use with ceramic, porcelain, natural stone, glass or mosaic tiles.

Due to the nature of the substrate and the fact that these were quartzite tiles, Norcros Adhesives carried out full lab testing in order

“This was a very satisfying project for us to be involved with,” says Nick Bratt, National Specification Manager at Norcros Adhesives.

“By using Norcros Adhesive products we were able to overcome the issues that the customer was experiencing with the previous floor – and the end result looks superb. As a result of excellent collaboration with Bentley Rowe, the project was completed on time and within budget.”

Norcros Adhesives, Harewood Street, Tunstall, Stoke-on-Trent, Staffs., ST6 5JZ Tel: 01782 524140 www.norcros-adhesives.com 20/07/2021 10:47:32

RRNews - Issue 50

As well as incorrect drying of the anhydrite screed, leading to moisture trapped under the tiles, the team from Norcros Adhesives found that the original surface hadn’t been sanded or properly prepared. So there was poor adhesive coverage and poor adhesion to the tiles.

RRN721027 Norcros HP.indd 1

13/12/2019 14:06:58

29

EXTREME POWER – WITHOUT THE CORD The freedom and convenience of cordless power now goes further than ever, thanks to BITURBO Brushless Technology from Bosch Professional.

Tough jobs requiring large rotary hammers, angle grinders or saws were once beyond the reach of cordless power tools – but not anymore. BITURBO Brushless, described by Bosch as its most innovative and powerful 18V range to date, matches the power and performance of corded tools rated up to 1800W.

Feel the Extreme BITURBO Brushless’s revolutionary technology gives trade professionals a sensation of extreme power by combining two key elements: a highperforming brushless motor and the high-powered Bosch ProCORE18V Professional Battery System.

Importantly, these two parts have been engineered to work together perfectly and maximise each other’s performance.

The brushes in traditional DC motors generate friction and heat, which cause damage, reduce energy efficiency, and limit power. They also wear out and need regular replacement. Brushless motors are much more efficient and powerful, run

for longer per charge, and have up to twice the lifespan. BITURBO motors boost power higher still by maximising airflow, to reduce resistance, and by using high-strength neodymium magnets.

An 8Ah or 12Ah ProCORE18V battery, designed to drive and maintain higher currents for powerintensive applications, unleashes the BITURBO motor’s full effect. ProCORE18V’s Bosch Coolpack 2.0 technology uses intelligent heat management to optimise efficiency, for greater power and runtime, while preventing overheating to prolong battery life. Meanwhile, the BITURBO motor brings out ProCORE18V’s full potential. A tool powered by one light and compact ProCORE18V battery can match some competitors using two batteries, enabling a reduction in the tool’s overall size and weight.

Ultimate Performance.

Maximum Freedom.

BITURBO Brushless tools and ProCORE18V batteries are an addition to the fully compatible Bosch Professional 18V Flexible Power System. Any Bosch Professional 18V tool, battery or charger bought since 2008 will work with any other,

although BITURBO and ProCORE18V will always perform best when teamed together. This system’s multiple options include the world’s fastest 18V charger, the Bosch GAL 18V-160 C Professional, capable of charging an 8.0Ah ProcCORE18V battery from 0 to 80% in 32 minutes.

BITURBO Brushless tools, like all Bosch Professional products, are built to a high quality for professionals who take a pride in their work and their equipment. Their extreme power is packaged in lightweight designs for easy handling, and their high specifications typically include electronic safety and control systems. Most feature onboard interactive displays and offer the option of Bosch connectivity, allowing functions such as remote adjustment and data transmission.

Other BITURBO tools include:

Bosch GKS 18V-68 GC Professional BITURBO Hand-held Circular Saw – Quicker than a corded saw – blending top performance with great flexibility

Products of particular value in refurbishing and renovation work include two SDS-max Bosch Professional BITURBO Brushless Rotary Hammers: GBH 18V-45 C and GBH 18V-36 C. Each powerfully drills and chisels in concrete and other hard materials, with precise, controlled, safe and comfortable operation aided by features like Bosch Soft Start and Bosch KickBack Control. These highly intelligent tools also offer an inbuilt user interface and a Bosch connectivity module.

GBH 18V-45 C is the top heavy-duty choice, delivering 12.5J of impact energy while weighing less than comparable mains-powered products – even with a 12Ah battery in place. GBH 18V-36 C is significantly lighter and more compact than any other cordless SDS-max hammer, but still packs an impressive punch at 7.0J.

Bosch GKT 18V-52 GC Professional BITURBO Plunge Saw – Outstandingly compact with superior mobility and performance

Bosch Professional World You can now explore the BITURBO range – and other Bosch Professional power tools, measuring tools and accessories – through a new immersive 3D experience: the Bosch Professional World. This exciting platform, at www.boschprofessionalworld.com, lets you get up close and personal with the products – and you don’t even have to leave your sofa. You will be able to interact with them, learn more about their capabilities and see for yourself how they make trade professionals more efficient.

Bosch GWX 18V-15 SC Professional BITURBO Angle Grinder – High performance and high specification including X-LOCK keyless accessory-change system

For the latest news, updates and competitions from Bosch Professional, you can also go to @boschprouk on Instagram.

Bosch GCM 18V-216 Professional BITURBO Mitre Saw – Corded power, compact size, class-leading cutting depth and unmatched application range As you might expect, BITURBO Brushless products cost a bit more than normal tools – but they soon pay you back. There are immediate savings on time and energy in every job, and in the longer term their extended tool and battery life will mean less spending on replacements.

OPTELMA’S BESPOKE LIGHTING EXUDES OPULENCE AT THE WHITE HALL, HARRODS Standing proud in Knightsbridge, the world’s leading luxury department store, Harrods, has experienced impressive footfall since reopening its doors to loyal customers following the latest nationwide lockdown.

T

here is a lot to discover as you set foot into the iconic store located in the heart of London. Welcoming customers to the world’s ultimate beauty destination, The Beauty Halls at Harrods are positioned on the ground floor where shoppers will find prestigious brands and luxury products. Dedicated entirely to luxury skincare ranges, The White Hall is the second phase of the Beauty Hall renovation which has been reimagined as a glasshouse orangery within a private walled courtyard.

RRNews - Issue 50

Leading architectural hybrid lighting company, Optelma, worked alongside renowned Lighting Designers Isometrix Lighting + Design, international award-winning interior design firm, the GA Group, and well-respected London-based contractor, Jaysam, to create an elegant, calm space with a luxurious feel encouraging customers to interact with the space and the products on offer.

32

“Optelma’s bespoke panels were the perfect solution to fit the brief for The White Hall skylight. It was a pleasure to work with the Optelma team on this seemingly challenging brief which involved several intricate elements from design through to installation, and we were thrilled with the final result.”

Optelma embraced Isometrix’s and the GA Group’s design concept and visuals to curate a beautiful, bespoke lighting feature which was so meticulously thought out, it would be hard to distinguish between the final product and the initial design vision. Whilst achieving the desired aesthetic, a number of challenges were met throughout the installation, from engineering a maintainable system which incorporated other services, such as sprinklers, to working with 3D light boxes comprised of diffusers on two or three sides.

Designed to suit the GA Group’s unique interior, Optelma’s bespoke lighting incorporates Philips high-end Fortimo LED Drivers and Boards along with Casambi’s innovative technology to provide a futureproofed lighting control solution. Nine multi-panel sky lights, and downlights within the parade of the large LED panels, were installed to create the correct lighting levels and colours, whilst ensuring the finish was compliant with the necessary health, safety and fire regulations.

Throughout the design and installation, all project partners sought to sympathise with the building’s architectural past.

Providing a dramatic contrast to the moodier adjacent foodhall, a more contemporary light palette was used for The White Hall with heritage inspired architectural detailing to complement the Beauty Halls scheme. Large architectural columns with stunning faceted white stone are proudly positioned in the centre of the space which showcases marble counters sitting beneath the feature skylight above.

Lighting up the entire space, the skylight diverts the attention of the guests to make sure they look up and take in the beauty above.

Graham Watkinson, Managing Director at Optelma commented: “We were delighted to supply and install the lighting for this prestigious and iconic store. As with any commercial lighting installation, there were several hurdles to overcome including a very tight timeframe, and it was essential that all lighting can be easily accessed in the future should any maintenance issues arise. Thanks to Isometrix and The GA Group’s wealth of experience and an exceptional project team it was a fantastic brief and we are extremely proud of the finished look.”

Hannah Jacobs, Job Captain at The GA Group added: “Optelma’s bespoke panels were the perfect solution to fit the brief for The White Hall skylight. It was a pleasure to work with the Optelma team on this seemingly challenging brief which involved several intricate elements from design through to installation, and we were thrilled with the final result.”

Property Compliance is our business - before, during and after refurbishment or reconstruction.

ONE STOP SHOP FOR PROPERTY COMPLIANCE AND DUE DILIGENCE SOLUTIONS Asbestos Surveying & Inspections Asbestos Removal & Project Management Health & Safety Consultancy Property Condition Reports Fire Risk Assessments & Fire Safety Compartmentation Studies Disability & Equality Access Surveys Legionella Risk Assessments Compliance Software

SNICKERS WORKWEAR STRETCH SHORTS – FOR STREET-SMART COMFORT THIS SUMMER Brand NEW Men’s and Women’s Work Shorts for the flexible working environment designed for superior comfort and freedom of movement.

Combining 4-way stretch fabric that delivers working comfort all day with street-smart, slim-fit designs, Snickers Work Shorts are great for grafting in the warmer months.

These lightweight garments feature a body-mapping design and are made from a self-ventilating stretch fabric with CORDURA® reinforcements for durability all-round mobility when you need it most.

The Men’s FLEXIWork lightweight work shorts come with flexible gusset seams and also have easy-to-access holster pockets with zip compartments, an expandable stretch cargo pocket and a ruler pocket.

The AllroundWork Women’s multi-purpose, slim-fit shorts have 4-way stretch panels in the right places for consistent comfort, practical pockets for optimal functionality and great freedom of movement.

Getting more information on the Snickers Workwear clothing range is easy. You can call the Helpline on 01484 854788; check out www.snickersworkwear.co.uk and download a digital catalogue or email sales@hultaforsgroup.co.uk

ASAP Comply Ltd, G3, Oaklands Office Park, Hooton, Cheshire, CH66 7NZ

Visit asapcomply.com ISO 9001:2015 ISO 14001:2015 ISO 45001:2018

ISO/IEC 17020:2012 Surveying for Asbestos Reinspection of Asbestos

4617

RRNews - Issue 50

For professional tradesmen and women who rely on their gear in demanding environments, they’re a must for those who want the ultimate in cool comfort this summer.

For a no obligation quote contact us on 0151 363 2333

33 RRN5210004 Snickers QP.indd 1

23/04/2021 18:08:03

Project News LANDMARK CLIFTON VILLAGE DEVELOPMENT NOW COMPLETE An iconic gateway development in Clifton Village is now complete and homes are available to buy and move into immediately in a newly restored Grade II listed rectory building complete with executive properties in its grounds.

W

orks on the highly-anticipated Rectory Mews development began last year, led by Tomlinson Homes, a division of the G F Tomlinson Group, and construction involved the restoration and conversion of the previously derelict Old Rectory site, which dates back to the mid1700s, transforming the historic building into a prominent gateway residential feature in the sought-after Clifton Village in Nottinghamshire.

The Old Rectory, once home to the Rector of Clifton, is a typical Georgian style building with south-facing garden elevations, and the property still retains its original square stairwell with wooden cantilever stairs and large purpose-built rooms. Along with its boundary wall, it occupies a prime position in Clifton Village.

The development comprises four luxury homes within the Old Rectory building, each with its

own entrance, outdoor space and garden, and within the beautifully landscaped grounds – three new executive properties have been built with garden facing elevations which are accessed through a private gated driveway.

Homes within the Old Rectory conversion include The Gatehouse - a three/four-bedroom property and The Cottage - a two-bedroom property, which are both sold and occupied.

The Rectory - a five-bedroom property with reinstalled period features and views into the garden and The Lodge - a four-bedroom property, are both still available for purchase.

Sat within the exclusive grounds – the three new executive detached homes include two five-bedroom properties - Beech House and Oak House, and Cedar House - a six-bedroom property, which is sold. Beech House and Cedar House are currently available for sale. The stunning new build properties boast ample living spaces, with garages, security gated access and sun lounges.

Working closely with the local community and Nottinghamshire County Council’s conservation team for all restoration works, Tomlinson Homes has ensured each property is fitted with stunning high specification fixtures and fittings including Burbidge kitchens sourced locally from Design Time in West Bridgford and bathrooms from Roca, and Villeroy and Boch.

The location of the development and all new build properties have been inspired by the

location and have been named after trees within the surrounding grounds.

Located in a prime position, Rectory Mews is in close proximity to major employers including Experian, Boots and both Nottingham universities, with easy access to major travel routes including the M1, Beeston Station and Nottingham Parkway Station which has regular trains to London and East Midlands Airport.

Siman Preston, group property manager at Tomlinson Homes, said: “Rectory Mews is an iconic development and we are incredibly proud that it is now complete. The project presented some interesting challenges which the experienced site construction team resolved without causing any inconvenience or delays to the project and now that the scheme is finished, all those involved should be proud of what they have achieved, now the once derelict building has been lovingly restored to its former glory.

“This stunning restoration and conversion of the once derelict building in a prominent position in Clifton Village, gives the location the entrance it so rightly deserves, and we look forward to welcoming buyers into their new homes and inviting visitors to look around the properties.

We’ve already sold three properties and have had a great amount of interest in the four remaining homes – so we encourage anyone who is interested to register for viewings with William H Brown if they would like to look around, which is highly recommended.”

£9.1M REDEVELOPMENT PLANNING APPROVAL MOVES SUNDERLAND CLOSER TO CARBON NEUTRAL STATUS A £9.1m development project will aid Sunderland’s ambitious plans to become a cleaner and greener city after planners gave it the green light.

P

arsons Vehicle Workshop and Depot in Washington is set to be transformed in a contract which will help Sunderland City Council achieve carbon neutral status for Sunderland by 2040.

RRNews - Issue 50

The existing workshop will be demolished to make way for a brand-new depot building which will house workshop spaces and office accommodation. A fuel station, electric charging hub, and a large barn which can store up to 7,500 tonnes of gritting salt will be constructed, as well as a security gatehouse to service the entrance and lead to fleet, staff and visitor parking facilities.

34

Councillor Graeme Miller, Leader of Sunderland City Council, said: “As we move towards our aim of being a carbon neutral city, it is fantastic to expand our capacity for specialist electric and other low carbon emission vehicles.

“At the same time, future-proofing and investing in our depot facilities ensures we can continue to

deliver quality frontline services to residents.”

To drive forward Sunderland’s green energy targets, the depot will include solar photo voltaic and battery storage system, which is being match funded by the European Regional Development Fund. The Battery Energy Storage System (BESS) will capture the energy produced by the solar PV - limiting the electricity required from the grid – and provide a charging facility for the councils growing electric vehicle fleet.

Work will begin in Summer 2021 and will be delivered by Esh Construction in partnership with Howarth Litchfield Architects, Portland Consulting Engineers and Desco.

Gary Dobson, Divisional Director at Esh Construction, said: “We’re delighted with the planning outcome and look forward to working with Sunderland City Council, one of our longstanding and valued clients in the region, to deliver this development. It is an exciting time for the city with a number of transformational

projects recently unveiled. As a local contractor we will harness the benefits of a strong regional presence and supply chain to deliver quality social and economic value for Sunderland throughout this scheme.”

Howarth Litchfield Director Keith Handy added: “Howarth Litchfield is delighted to have been involved with a project which sets the benchmark on sustainability and the management of local authority fleet vehicles.

“The facility will not only support the current outgoing fossil fuel vehicles but is also heavily designed around the incoming electrical vehicle fleet both in terms of the vehicles’ everyday maintenance as well as providing a centralised electrical charging hub.”

The development will provide a new strategic asset for Sunderland City Council and will house frontline services for fleet management, highways operations, refuse collection, horticultural services, and seasonal road gritting.

Project News

CLIVEDALE LONDON SECURES PLANNING FOR 20 CARLTON HOUSE TERRACE, ST JAMES Westminster City Council approves Clivedale London’s office redevelopment and extension at the former DeBeers UK HQ

C

livedale London has been granted planning permission for the adaptive reuse and office extension proposed for the Crown Estate’s iconic 20 Carlton House Terrace.

The approved scheme, designed by internationally acclaimed architectural practice Rogers Stirk Harbour + Partners (RSHP), will enhance the 1970s St James building, delivering an additional three floors and offering a total 162,000 sq. ft. of commercial space across 11 storeys. Set to be delivered by ultra-prime developers Clivedale London in 2023, the commercial build will introduce a futureproofed office environment that promotes a healthy workspace inspiring collaboration and creativity and in turn, caters for a post-pandemic market.

Upon arrival at the refurbished building, future tenants will be met by a 2,700 sq. ft. double height reception leading directly to a new glazed lift-group connecting all floors and overlooking a 1,200 sq. ft. triple-height top-lit atrium. Sitting at the heart of the revised scheme and spanning the ground and two subterranean levels, the wrap around glass atrium will provide natural light and dramatic volume of space to the floors below. Transforming these belowground spaces for flexible-use, additional natural light will be supplied by repurposed ventilation ducts creating light wells at the perimeter of the building, maximising daylight and contributing to the welfare of occupants.

Enhancing the calibre and performance of the existing office space, the approved plans will make way for a wealth of amenity offerings.

Reconfigured basement levels allow for the addition of wellness and gym spaces, dressing rooms, bicycle storage and underground car parking.

neighbouring Waterloo Gardens. Tenants of the three additional stories will benefit from floor to ceiling glazing and 8,000 sq. ft. of extensive garden terraces on levels 8 and 10 – a result of the building’s reimagined stepped form - providing panoramic views across central London.

Tarun Tyagi, CEO of Clivedale London, comments: “We are delighted to have successfully acquired planning permission for 20 Carlton House Terrace, a contemporary, authentic and elegant refurbishment synonymous to the landmark location of St James.

Graham Stirk, Senior Design Partner at Rogers Stirk Harbour + Partners, comments: “With news of this approval of planning for 20 Carlton House Terrace, we look forward to commencing work on delivering our second project for Clivedale London, in one of the West End’s most prestigious addresses.

“This announcement illustrates Clivedale London’s continued ambition to diversify our portfolio extending across commercial, residential and hospitality projects and marks not only our third commercial asset but the seventh scheme within our ultra-central London portfolio.”

“There is no doubt that the pandemic has heightened demand for flexible workspaces focused on the wellbeing of the workforce, something we set out to achieve in the design of this scheme. A focal point of the enhanced proposal was recalibrating the previously labyrinthine internal design, relocating the passenger lifts to create more regular and flexible floorplates. Our vision carefully repositions them on the outside of the building, simplifying the floorplans and enabling occupiers to adapt spaces to cater to creative, collaborative and productive working. This open floorplan will enhance tenure flexibility, expand the opportunity for high-end amenity offerings and support increased efficiency, all of which will prove key in successfully catering for a post-pandemic workforce.”

With the scheme’s particularly sensitive context, set within the St. James’ Conservation Area, between a Grade I listed John Nash terrace and the listed buildings along Pall Mall to the North, the 20th century primary façade will be enhanced to harmonise with its surrounding heritage-rich streetscape. Careful analysis of the scheme led to the decision by Clivedale London and Rogers Stirk Harbour + Partners to retain the superstructure and basement box of the original 1970s build, bringing with this, the associated embodied carbon benefits of adaptive reuse.

The resulting refurbishment, set to unveil in 2023, will offer a new concept of luxury commercial space in London’s most iconic office location, St James.

Across the scheme’s lower levels, the carefully considered fenestration will offer a connection to the outside world, including Cockspur Court, a landscaped courtyard open to both tenants and the public at level 1 and views over

RRNews - Issue 50

35

Project News NORTHAMPTON MUSEUM & ART GALLERY OPENS FOLLOWING SIGNIFICANT EXPANSION AND REFURBISHMENT Northampton Museum & Art Gallery has officially opened its doors to the public with the highly anticipated reopening taking place Saturday 10th July 2021. Following significant expansion and refurbishment works, the role of the museum in the area has been transformed, providing an enriched and improved visitor experience to contribute towards the regeneration of Northampton Town Centre’s Cultural Quarter.

A

s project architects and lead designers, Northamptonshire based GSSArchitecture, were involved from inception to completion alongside Quantity Surveyors, CS2 Limited, Mechanical and Electrical Engineers, Blueprint, and BCAL Consulting, who provided the Civil and Structural Design. Wildgoose Construction Ltd were brought on board as Main Contractor, alongside Exhibition Designer, Creative Good, to complete the project team.

Located on Guildhall Road, in the heart of Northampton’s expanding Cultural Quarter, the museum and gallery has undergone extensive remodelling and refurbishment works in addition to the construction of a nine-metrehigh courtyard extension which connects the existing museum with the surrounding vacant historic buildings including an Old Gaol. These surrounding buildings were converted to museum use resulting in a project that more than doubles the space on offer to the public.

The challenging scheme required close collaboration between the project team to ensure the client’s goals and aspirations were achieved within their limited £6.7m budget.

The spaces needed to be carefully designed to improve connectivity between the publicly accessible areas and increase income generating spaces whilst retaining the historic character of the buildings.

To allow for the visually striking courtyard extension, the existing ramped link, which covered much of the historic south façade of

the museum, was demolished. Upon removal, an elaborate arch in the Gaol Block east façade was exposed, which has been incorporated as a key feature within the extension. The new link area provides much needed “Third Space” which provides visitors with a bright and airy café and adjacent outdoor terrace. Materials inspired by the local surrounding architecture were chosen including a combination of Sandstone, slate and glass, with the finished result being that of a modern yet sympathetic extension that allows natural light to flood the internal space.

In conjunction with the new build extension, significant alterations and refurbishments to the existing spaces were carried out to improve accessibility and connectivity. The Old Gaol Block, formerly used as Council offices, is now home to temporary exhibition galleries, studios, and the museum’s world-renowned collection of shoes, housed on the lower floor. The location of the Shoe Gallery allows it to flow into parts of the vaulted structures which formed the original Gaol, more than doubling the space on offer to the public. Utilising the basement space required substantial improvements to the existing walls to reduce excessive moisture.

New plant was installed to allow for humidity control, which is essential to provide the correct environment to protect the collections.

The café and outdoor terrace are supported by additional income generating space which have been created in the form of a Central Hall, which offers multi-use lettable space for events, exhibitions, and corporate hire, as well as an expanded shop and new selling gallery, which focus on local artists and makers.

Tom Jagger, Partner and Lead Architect at GSSArchitecture, said of the project, “It is fantastic to see the Museum gearing up for it’s opening, and I can’t wait to see the spaces being enjoyed by members of the public.

Despite the challenges encountered throughout the construction, which are inevitable when working with historic buildings, the project team worked closely to ensure that quality was never compromised and solutions were proposed promptly and efficiently, something which is extremely important when working to a tight budget! The spaces were carefully designed to allow for further expansion in the future, but, for now, I look forward to seeing the people of Northampton and further afield enjoy this great facility.”

The areas for social interaction which have been created have transformed the building into a destination that will keep visitors engaged and coming back for repeat visits.

RRNews - Issue 50

Following the success of this project, GSS are currently working as Architects and Lead Consultant on neighbouring town, Kettering’s, Gallery, Library and Museum expansion and refurbishment project, which starts on site in July.

36

Heating, Ventilation & Insulation PANASONIC NANOE™ X SAFEGUARDS DENTAL PATIENTS AT RIVERDALE HEALTHCARE CENTRES MADE IN BRITAIN

A network of 27 dental practices operating mainly in Yorkshire and the North East has started a programme to install Panasonic’s nanoe™ X technology to enhance protection for patients and staff whenever new air-conditioning units are required or where units need to be replaced. nanoe™ X is a technology that is helping to improve protection and inhibit the growth of certain viruses – including SARS CoV-2.

Riverdale Healthcare was established in 2018, acquiring Alpha Dental Group which has a long-standing relationship with SubZero Climate Control, who have installed and maintained air conditioning through the dental practice network. Through discussions with Craig Brooke, Managing Director of Sub-Zero, Riverdale Healthcare took the step of updating two of its practices with enhanced air conditioning and plan to expand this throughout their dental network.

Ian Gordon, Dental Director of Riverdale Healthcare explained: “When the pandemic hit in 2020, I was invited to a webinar about how Korea was finding that air filtration and air purification was perhaps contributing to keep the country’s cases lower than elsewhere in the world. Early on during the first lockdown in the UK, advice was to not use air conditioning, which made everything very uncomfortable as we were working for long periods wearing all the extra PPE and with the soaring temperatures hitting record levels last summer. It therefore seemed logical to me to have air conditioning with some kind of filtration built into the units, so I was really interested in this idea.”

We’ve got something NEW up our sleeve...

TracPipe® with an integrated containment sleeve!

Save time and money by not having to apply a secondary sleeve! With TracPipeCC® we’ve got it covered!

Sub Zero came to the rescue by recommending the Etherea range of air conditioners which come with Panasonic’s proven nanoe™ X technology built in. nanoe™ X technology collects invisible moisture in the air and applies a high voltage to it to generate hydroxyl radicals contained in water. Hydroxyl radicals (nature’s detergent) inhibit the growth of certain viruses, bacteria and allergens.

Contained in tiny water particles, nanoe™ X generates particles that have a long lifespan and can spread over long distances. Recent, independent testing shows that nanoe™ X can inhibit certain types of bacteria and viruses, meaning the new air conditioning system can help protect patients and staff alike whilst in the dentist practice.

To find out more about the Panasonic’s range of products, please visit www.aircon.panasonic.eu/

RRN721009 Panasonic QP.indd 1

20/07/2021 11:05:16

FREE TRAINING

FREE ON-LINE GUIDES

FREE ON-SITE VISITS

FREE SUPPORT

Find out more...

Call

+44 (0)1295 67 66 70

Email

eurosales@omegaflex.com

www.tracpipe.co.uk RRNews - Issue 50

© 2018 Omega Flex, Inc. All rights reserved. FGP-771UK 10/18

37

TR STUDIO REIMAGINE A LONDON VICTORIAN DUPLEX APARTMENT INTO A LARGE, MODERN, MINIMALIST FAMILY HOME London-based architecture and interior practice TR Studio reimagined a West London duplex apartment to become an elegant but hardworking four-bedroom family home.

L

ocated in Holland Park, West London and occupying the ground and first floor of a Victorian townhouse built in the 1870s, TR Studio were tasked by the private residential Client to reconfigure and refurbish the property making it more usable for their growing family life with young twin boys and visiting Italian family.

Whilst the duplex apartment had great proportions, lofty ceilings and lots of space, the existing traditional layout of rooms felt restricting. As such, TR Studio proposed a simpler, considered flow which maximised natural light and incorporated the Client’s request for built-in joinery whilst maintaining the grand proportions of the main rooms.

On the ground floor the property has two main principal rooms featuring period architectural details. Carefully preserving the grand proportions and characteristics, TR Studio opened several walls to create the feeling of an open-plan layout which would accommodate the Client’s family life more efficiently.

RRNews - Issue 50

At the rear of the property, the main living area is south facing. TR Studio wanted to maximise the light, airy feel of this space and pull that through the entire apartment. Utilising the large bay windows to flood the room and hallway with natural light, TR Studio chose an offwhite for walls to enhance light refraction further. Considering every aspect and usage of the room, TR Studio created a dining area around a banquette window seat. Providing an elevated view over the mature garden, and bringing a sense of the outdoors in, the bespoke design features subtle brass detailing which adds a touch of glamour and interest that elevates the space through material.

38

With a compact kitchen just off the living dining room, TR Studio took inspiration from the bay windows to design large bespoke interior glazing and doors to connect and separate the kitchen space from the main flow of the room. When open, the sliding doors sit perfectly aligned appearing as a fixed glass screen on the island allowing the kitchen to become an integrated part of the living dining rooms spatial design, with the versatility of being a fully separate room of its own when the doors are closed. In keeping with the chic pared back aesthetic, TR Studio designed bespoke, sleek, white kitchen joinery with an Arabescato marble worktop and splashback, brass detailing, and a statement Flos light fixture designed by Michael Anastassiades. The result is a wellcrafted, calming kitchen environment for a busy family.

With a mirrored open and airy layout and grandeur, the second principal room,

located at the front of the property was designed by TR Studio to function for the client as a TV room, children’s playroom, and guest bedroom. Opting for colourful low-profile furniture and bespoke fixed shelving across the principal rooms, the size and flow of the ground floor space was enhanced even further.

TR studio opted for French Versailles timber parquet flooring throughout the apartment on both floors to ground the grand proportions and add a crafted, luxurious aesthetic to the property.

Transforming the under stairs storage space, TR Studio created a discreet guest wet room allowing overnight guests using the ground floor guest bedroom to have bathroom access. Balancing the Client’s desire for contemporary styling within the period property, TR Studio employed polished plaster walls to create a Powder Room feel for everyday use. Diamond patterned encaustic cement tiles were chosen for the floor which match the communal hallway and brass fixtures add a refined elegance.

On the upper, first floor of the property the layout houses a master bedroom, two children’s bedrooms and a family bathroom.

In the master bedroom TR Studio again opened-up walls to create a large, elegant sleeping space, dressing room and study. Featuring large floor to ceiling windows, simple sheer window dressing was chosen to maximise light whilst providing privacy. Here detailing such as, the integrated headboard and bedside tables and sleek wardrobe storage showcase TR Studio’s talent for balancing function, style, and space.

A vintage mid-century desk adds a masculine touch to the minimalist space.

A sleek, modern, marble clad family bathroom feels luxurious and calming.

Here, TR Studio again chose a natural concrete finish for walls and brass fittings to complete the space.

In the twin boy’s bedrooms, bespoke platform beds were designed to provide plentiful storage for the growing children, with connecting hatches designed for the boys to talk to each other and be connected whilst still having their own space with room to grow as individuals. As a twin himself, founder Tom Rutt found a very special connection to this part of the project.

Integrated window desks create room to work and play whilst fun pops of colour add personality to walls.

The refurbished property demonstrates TR Studio’s flexible use of space with

Commenting on the project, founder and lead architect Tom Rutt says: “We really enjoyed working with this very special client to make the most of the wonderful bones of this building. The proportions were great, and we wanted to retain the fundamental room shapes and details but make those rooms flow into each other in a far more relaxed way, leaving no spaces unused and letting the client’s personality shine through.”

Images: © Billy Bolton

“We really enjoyed working with this very special client to make the most of the wonderful bones of this building. The proportions were great, and we wanted to retain the fundamental room shapes and details but make those rooms flow into each other in a far more relaxed way, leaving no spaces unused and letting the client’s personality shine through.”

RRNews - Issue 50

Working collaboratively with the Client at every stage, TR Studio have retained the feel of a grand Victorian West London apartment, whilst successfully reimagining this duplex residence to create a fresh, minimalist interior for a modern family lifestyle that is at ease with the property’s heritage.

clever interventions. A calmness and refinement to the overall design is signature to the studio. The lightfilled, classically proportioned rooms are grounded by the beautiful timber parquet floor creating spaces that are frames for natural light, colourful furniture, and the family life at play.

39

Guttering Feature GUTTERING – A PROPERTY’S FIRST LINE OF DEFENCE AGAINST THE ELEMENTS Dave Osborne, Technical Manager at Swish Building Products, highlights the importance of correct guttering system installation and offers advice on achieving the best results for both new and replacement projects.

“T

he importance of ensuring a correctly installed guttering system on domestic properties and buildings should never be underestimated, as poorly fitted or maintained materials can lead to damage that is costly to repair.

“An effective and correctly installed guttering system, fitted around the roof perimeter and securely fastened to the fascias, can be a property’s first line of defence during a heavy downpour, helping to guard against leaks and standing water issues.

“By understanding how to choose a system with the appropriate flow-rate and fitting both the guttering and downpipe so the system works cohesively, you’ll be rewarded with a smart installation that will serve to prevent building damage and last for many years to come.”

Preparation is key “For both new and refurbishment projects, preparation is key to achieving a successful installation.

“For new projects, you should select a gutter system that meets the design flow-rate or area of the relevant roof. As well as normal levels of rainfall, a domestic or light commercial eaves gutter system must be able to cope with intense rainfall lasting at least two minutes. To help you chose the best solution for your project, the British Standard BS12056 shows how to work out the amount of rainwater (in litres per second) that could run off a roof.

RRNews - Issue 50

“With regards to replacement projects, it is a natural decision to replace guttering ‘like for like’. However, you should consider the greater frequency of storms and increased rainfall we now experience and modify the gutter system’s capacity as a positive precautionary measure.”

40

Planning makes for the perfect project “Start by planning your installation using specific component diagrams that can assist you in selecting the correct materials from the very beginning. Arming yourself with the knowledge of how to correctly install guttering is also key to a successful installation. The below offers a clear and concise overview of how to get started.”

GUTTER INSTALLATION GUIDELINES • Position the running outlet accurately by holding a plumb line against the fascia directly over the drain. Mark the position on the fascia with a pencil. Fit the outlet no more than 50mm below the level of the roof tiles, then fix with 2 x 25mm x 5mm round-head stainless steel screws (do not use countersunk screws as these can be over torqued with cordless drivers, consequently damaging mouldings).

• Fit a fascia bracket just below the top of the fascia board at one end of the run of guttering (opposite end of the outlet).

• Tie a plumb line (string) around the base of the bracket and stretch from the bracket along the fascia board before tying it to the outlet.

• Check that there is a fall towards the outlet (1:350 is recommended) to encourage water to drain efficiently.

• Mark the position of the fascia brackets, spacing them according to the gutter system chosen (see table below) but no more than 150mm from any corner, union, running outlet or stopend.

• In locations where heavy snowfall is prevalent, we recommend that fixing centres for fascia brackets be reduced to 600mm.

• Fix the fascia brackets with 25mm x 5mm stainless steel screws – we would recommend using all available fixing holes.

• Starting at the outlet, fit the first length of gutter by tilting the gutter to fit under the back clip, and clip in at the front edge.

• Fit a union bracket at the other end of the first length and screw it into the fascia using all available fixing holes then fit the next length of gutter into it.

Continue joining lengths ensuring all joints line up with the “fit to here” depth marked in the fittings.

• Cut the last section of gutter to fit using a hacksaw and fit a stopend.

• Use lubricant/silicone spray on all gutter seals for ease of fitting and for improved in-service performance.

DOWNPIPE INSTALLATION GUIDELINES • Using a plumb line, mark a vertical line on the wall from the running outlet to the drain.

• Place an offset bend onto the base of the running outlet. Place a second offset bend on a length of downpipe and measure the section length required to join the two offset bends, cut a suitable length of downpipe – the “swan neck”.

• Hold a downpipe clip centrally over the plumb line and mark the fixing holes on the wall with a pencil. Repeat down the wall, spacing pipe clips no more than 1.8m apart.

• Drill the fixing holes.

• Working from the top downwards, install the downpipe. If additional lengths of downpipe are required, join using a socket and pipe clip.

• Leave a 10mm gap between the end of the pipe and the bottom of the pipe socket to allow for expansion. Fix a pipe clip over the joint.

• Use wall plugs suitable for the substrate and when fitting pipe clip screws to ensure that the application is secure. Fix pipe/socket clips with 2 x 32mm x 6.5mm round head stainless steel screws.

• Where required, fit a shoe at the bottom of the downpipe so that it directs water into the drain, if required. Fix the joint with a pipe clip.

“The installation of guttering may appear to be a straightforward task, but by considering the style and shape of the building on which you are installing the guttering, and the increase in inclement weather we now experience in this country - as well as preparing and planning in advance - you will ensure you deliver a first-class project, first time.”

For more detailed guidance on the installation of guttering and downpipes and further information on the Kayflow range of products, visit www.kayflow.co.uk

Weatherproof your gutters at a cost you can afford.

ECO-LINER from Ampteam. Another clever but cost effective product designed to last. Ampteam have created a family of innovative products that combat the ever increasing deluge of bad weather we have in the UK.

Unrivalled excellence in gutter lining technology. www.gutterliners.com

Saving for a rainy day...

UNI-DAM, a rainwater management system designed to prevent heavy storm rainfall from overwhelming gutter systems and flooding into buildings.

The system is fixed to the roof and once installed slows and controls the flow of rainfall into the gutter.

Unrivalled excellence in gutter lining technology. www.gutterliners.com

RRNews - Issue 50

For more information or quote please contact our office on 01384 252777.

41

Roofing Feature

A GUIDE TO FLAT ROOF REFURBISHMENT

By James Wilkinson, Gradient Design Team Manager

A

ge, poor maintenance and deck deflection are among the many causes of roofing failure. When this happens, urgent action is required to prevent costly damage to the building itself.

Therefore, which factors need to be taken into consideration when undertaking the refurbishment of an existing flat roof system?

With climate change leading to an increase in extreme weather systems, which have seen four of the UK’s wettest winters take place over a 14-year period since 2006, it focuses the need to ensure a building’s most protective element is correctly designed and installed in order to optimise its long-term performance.

RRNews - Issue 50

Eliminate ponding Aside from the visual signs of failure, indications that a roof isn’t performing as it should include rooms within a building feeling too cold in winter or excessively warm in summer. When it comes to a flat roof’s refurbishment, an initial survey is carried out to assess its condition.

This will determine what action needs to be taken to ensure it meets industry regulations for energy performance. It will also help achieve the required falls outcome, which is crucial to directing water away from a roof and preventing ponding. A flat roof is typically

42

designed to shed water, not collect it. Failure to address this basic element of a roof’s design could ultimately lead to system failure and structural deflection due to the weight of water collecting on the roof.

Designing for falls In terms of falls, there are several types of tapered designs which ensure water is effectively dispersed from the roof, the most common being fully-mitred, and straight falls to tapered gutters. “Flat roofs are not flat”, as the saying goes, so in order to eradicate ponding issues, falls on a flat roof should achieve a minimum 1:80 pitch at any point. Gradient is able to manufacture a system that achieves these falls but still meets regulation thermal performance. This is due to its ability to offer a bespoke tapered insulation system that is designed to overcome the backfall in order to prevent water ponding.

Survey calculation For larger refurbishment projects such as those involving schools, surveys are even more of a necessity. It allows Gradient, for example, to plot where ponding-based deflections have occurred and allow them to design-out future issues by calculating how to achieve constant water movement over a roof, rather than have it disperse and build-up in different areas.

Ask the expert Ideally, a non-leaking flat roof can be refurbished simply by bonding a new tapered insulation system direct to the existing felt substrate. Again, this is where engaging with a specialist such as Gradient pays dividends, as its teams are not only able to design and manufacture a solution to a client’s precise requirements, the completed system can be transported in its entirety to ensure a time and cost-effective installation that will last the lifespan of the building.

Roof refurbishment isn’t a game of chance; one errant episode in the design or installation process can cost the building’s owner dear in the long-term. Which is why its overall maintenance is best left to the experts; because peace of mind is priceless.

qu

& ce o.u EE ey rvi m.c FR rv Se ste Su n rsy te i o p e Si tat em u o @k Q ries i

en

k

KEMPEROL® Liquid Roofing & Waterproofing Long term protection for flat roofs, buildings and critical structures Ideal for academic roof refurbishment, repair and new building projects.

• • • •

No hot works Sustainable Solvent-free Odourless

Whatever your requirements, we have a certified and proven solution to meet your needs.

Contact us to discuss your next project or arrange your free site survey.

KEMPER SYSTEM Tel: 01925 445532 enquiries@kempersystem.co.uk www.kempersystem.co.uk

Kemperol Liquid Waterproofing

SHACKERLEY’S SURECLAD® PROVIDES A HIGH-CLASS MODULAR SOLUTION FOR GRESHAM ST PAUL’S City office building, Gresham St Paul’s, has undergone a £50 million transformation, delivered by Mace. Designed by leading architectural practice, Wilkinson Eyre, the project has involved a three-storey extension at roof level.

T

he existing Portland stone façade has been retained and the architect needed to find a cladding material for the additional storeys that would reference the materiality of the existing building and answer planning requirements.

The cladding system also had to work within the loading parameters of the original structure and offer a viable solution for the buildability challenges of working at height on a confined site.

Shackerley’s SureClad® Engineered Stone ventilated cladding system answered all of these requirements and was installed as pre-fabricated modules, following close collaboration between Shackerley, and Austrian façade specialist, GIG Fassaden.

The possibility of using Portland stone was discounted early in the specification process.

Tzi Leung from Wilkinson Eyre explains: “The use of genuine Portland stone was problematic in terms of structural loading and buildability. The additional storeys were constructed using the building’s original foundations so we needed a lightweight structure and a façade system for the extension, compatible with a lighter frame. From a safety and buildability point of view, delivering and installing heavy stone at height also meant that an alternative material was preferable.”

The customdesigned modular units utilise Shackerley’s tried and tested undercut anchor and bolt fixing system, but the panels were secured directly onto an aluminium frame, designed and supplied by GIG Fassaden, creating 4m columns, each with 35 sections of engineered stone, including front panels and side returns.

The Wilkinson Eyre team considered a number of alternative cladding systems to find a close aesthetic match that would meet planning requirements and weight restrictions. Each potential solution was assessed against a series of criteria; look and feel, cost, fire safety, weathering, green credentials and mechanical suitability. The design team also considered a number of reference projects, which included Axtell House, an office building in Soho where Shackerley’s SureClad® Engineered Stone system was used for the façades of additional storeys to co-ordinate with the Portland stone of the original building.

Tzi Leung continues: “Shackerley’s SureClad® Engineered Stone system scored well against all our assessment

criteria. Robust and lightweight, it is fire tested and certified as A2-s1,d0 in line with BS EN 13501-1. The creamy beige Valpolicella engineered stone material with white variegation we selected from Shackerley’s extensive range provided an ideal match for the existing Portland Stone façade and the sandblasted finish we selected, created the right aesthetic for the project.”

Mace’s strategy was to install the façade as a modular system, with each pre-fabricated façade section delivered to site as an installation-ready module that could be craned into position and secured in place. Façade specialist, GIG Fassaden, designed the cladding modules and Shackerley fabricated 400 modular façade units at one of the company’s ISO 9001 certified factories in Lancashire.

RRNews - Issue 50

The custom-designed modular units utilise Shackerley’s tried and tested under-cut anchor and bolt fixing system, but the panels were secured directly onto an aluminium frame, designed and supplied by GIG Fassaden, creating 4m columns, each with 35 sections of engineered stone, including front panels and side returns.

44

Gresham St Paul’s is now complete, delivering a building that meets the needs of a corporate environment while considering responsibility to the natural environment. It adds to Shackerley’s portfolio of projects where the SureClad® system has provided a lightweight and robust solution for the façades of additional storeys, and highlights the company’s ability to enable a modular construction strategy.

Website: www.shackerley.com Phone: 01257 273114

People On The Move APSS TAKE ON TWO NEW STAFF AS BUSINESS DEMAND CONTINUES MOORES APPOINTS MARK PHELAN AS NEW HEAD OF CUSTOMER EXPERIENCE Leading British kitchen manufacturer Moores welcomes Mark Phelan as Head of Customer Experience.

C

ustomers have always been at the heart of Moores’ operations, and they are continuously striving to ensure that every customer gets an excellent experience every time.

Mark Phelan joins as Head of Customer Experience, a newly created role which sits within the Senior Management Team. Mark’s primary objective is to help Moores continue their journey of delivering exceptional customer service.

Mark has had a diverse career working across varied sectors including Financial Services, the Hairdressing industry, Global Distribution, and Housebuilding, with excellent customer service remaining a constant throughout. Mark said: “I am passionate about customer experience and am excited to be joining Moores: a company with massive future potential. I look forward to supporting the business in delivering even better ‘best in class’ customer service that really differentiates us from the competition.”

Steve Parkin, CEO of Moores, comments, “As we continue to grow, our focus remains on our customers and continuing to exceed their expectations. The secret to our success has always been our people and investing in a great team. To that end, I am delighted to welcome Mark Phelan to the company and am looking forward to seeing the new directions his contributions will take us in.”

Lincolnshire-based commercial interior design and fit out firm APSS has welcomed Emily May and Leanne Sleney to the team as business continues to see a rise in demand.

E

mily joins the team as a junior designer after graduating from De Montfort University in Leicester with a degree in interior design. She interned at the company over summer in 2019 and made such an impression that when a vacancy became available, she was asked to come back as a full time member of staff. She will be supporting all departments in helping create amazing workspaces for APSS clients.

Leanne has joined the team as an administration assistant and will be on the front line in communicating with customers and suppliers whilst supporting all departments within the company. Previously Leanne has worked in the hospitality industry and Lincoln City Football Club. This has given her the valuable skills to be customer-focused and success driven.

GLEEDS NAMES NEW LEAD FOR WESTERN EUROPE International property and construction consultancy Gleeds is continuing the development of its European operation with an announcement that Patrick Leniston has been named regional director for Western Mainland Europe (WME).

W

ith over 20 years’ experience in the built environment, Patrick’s most recent post was with Colliers International in Paris, where he was chief development officer. Prior to this, he had a long career with Arcadis, in both client and operational roles across mainland Europe.

Commenting on his new role, Patrick said, “I have always felt passionate about creating the

APSS has more than 20 years’ experience transforming workplaces to help boost staff morale and productivity as well as provide a lasting impression on customers. The company provides a range of products in addition to a full fit out and refurbishment design and build service including, installation of mezzanines and glass and steel partitions. It also supplies office furniture and bespoke joinery services to create an individual look for its clients.

right environment for teams to collaborate and grow in terms of client base, service offering, and culture. That’s exactly what I intend to do here at Gleeds – a business that has proved its resilience during the pandemic and is now pursuing ambitious targets as it seeks to expand and consistently outperform the market. I’m delighted that I have the opportunity to be part of this exciting period in the firm’s rich history.”

David Johnson, EMEA managing director added, “The appointment of Patrick to regional director for WME represents a commitment to overhauling Gleeds’ EMEA structure and modus operandi. Our strongest selling point is and has always been our people, so if we are to achieve our ambitious growth targets, we absolutely must continue to retain the great people we already have and attract value-add talent like Patrick into the business.”

“Through this restructure we’re looking to unite our EMEA region to make communication more fluid and collaboration easier. The aim being to harness the considerable knowledge and expertise of our teams throughout the entire EMEA region, for the benefit of our people, our clients and Gleeds as a whole,” he went on to say.

RRNews - Issue 50

As Gleeds’ head of Western Mainland Europe, Patrick has overall responsibility for driving growth in the region, which currently includes Germany, Italy, France, Spain and Portugal. He also acts as the EMEA lead for strategic sales and growth, working closely with Gleeds global senior team, individual country managers and the newly formed EMEA board to deliver excellent client service, promote best practice, and foster a culture of collaboration between markets in line with the business’ ambition to unify its operations worldwide.

Richard Mycroft, Operations Manager for APSS, said: “These appointments are great news and show how after a hard year for many businesses, APSS has continued to grow. The company is in a strong position, and this is only the start of introducing new faces. We are also looking to recruit a new project manager as well as a site foreman. Both Leanne and Emily will provide key support to both our customers and internal departments within the company to helping to create an improved customer experience and more efficient service.”

45

A

s UK summer staycations continue to soar, luxurious hotel Billesley Manor Hotel & Spa is delighted to open its doors and welcome guests to the heart of rural Warwickshire, following an extensive £5.6 million refurbishment.

Guests can expect newly refurbished bedrooms complete with rich, warm designs, upgraded guest spaces with a contemporary twist, a stunning restaurant and bar featuring original 16th century oak panelling, and a newly renovated spa and wedding venue.

BILLESLEY MANOR HOTEL & SPA PROVIDES A STAYCATION STEEPED IN HISTORY FOLLOWING £5.6 MILLION REFURBISHMENT Discover a rich history and elegant new design at this Magnificent Elizabethan Manor House Hotel

This unique 125-year-old property boasts charming grounds, complete with an 11th century church and a listed, ornate topiary garden, steeped in history. A variety of conference spaces have also been refreshed, and an ambient library adorned with a ceiling of floating books provides a light filled area for relaxation or inspiration, said to be where William Shakespeare wrote his famous comedy ‘As You Like It’.

Rooms & Design Many of the bedrooms have been expertly upgraded with sumptuous new furnishings. Four poster beds, period fireplaces and contemporary fabrics ensure a charming blend of traditional and modern, with elegant and refined design.

Communal spaces have also been enhanced with a new look, still in keeping with the former 16th century Elizabethan home’s historic charm. The incredible transformation includes the grand welcoming reception area, Great Hall, bar, lounge and gallery, and the Stuart Restaurant for guests to indulge in everything from themed afternoon teas to exclusive gastronomic delights with locally sourced produce. Drawing inspiration from the romantic English landscape, historic origins and the notable voices past and present that have retreated to Billesley, the hotel is the perfect sanctuary for guests looking to feel re-energised and inspired.

The hotel’s new makeover has kept its glorious floor-to-ceiling oak wood panelling complemented and elevated with a new rich colour palette of blues and golds. Plush, velvet furniture has been added throughout the property, whilst artwork by Pratiksha Tayal brings a contemporary twist to the traditional paintings that previously adorned the walls, creating a timeless luxury haven for all guests to enjoy.

Woven through History Listed in the 1086 Domesday book commissioned by William the Conqueror, the Billesley Estate has an expansive history dating back to 705 AD. One of its most famous visitors includes none other than William Shakespeare himself, who allegedly married Anne Hathaway in the All Saints church next to the hotel, and who’s granddaughter followed suit by getting wed in the very same church. William Shakespeare famously

46

wrote lines from his play ‘As you Like It’ from the library and as such many nods to Shakespeare can be found around the hotel from hand crafted feather pieces to more traditional artwork, allowing guests to become immersed in the rich tapestry of Billesley’s history.

Wellness Retreat Those looking to wind down can experience a number of indulgent beauty therapies within the newly refurbished Decleor spa. Guests can take a dip in the pool followed by a steam and a sauna, or make use of the secluded yoga hut and fantastic gym facilities. The romantic and historic topiary garden offers an idea backdrop for sunrise yoga and meditation which guests can enjoy on their own accord after picking up a yoga mat from reception.

The hotel’s new makeover has kept its glorious floor-to-ceiling oak wood panelling complemented and elevated with a new rich colour palette of blues and golds.

www.bespokehotels.com | www.billesleymanor.com

RRNews - Issue 50

Bucolic Surroundings Located in 11 acres of beautiful countryside just outside the medieval town of StratfordUpon-Avon and close to many engaging locations, this 16th Century country hotel provides a sanctuary from which to feel relaxed and inspired. Enveloped in rolling countryside, Billesley Manor Hotel & Spa draws inspirations from nature, creating spaces to reconnect. The exquisite, listed topiary garden planted over 125 years ago, has been curated and shaped to form giant chess pieces, inspired by Lewis Carroll’s Alice in Wonderland. The exquisite setting provides another unique opportunity for guests to spend time unearthing the true spirit of Billesley Manor Hotel & Spa.

47

SterlingOSB Zero makes walls strong and sustainable Many materials can be used to form walls and partitions but, when it comes to choosing a versatile, cost-effective and sustainable option, West Fraser’s SterlingOSB Zero is a winner. Ubiquitous on many construction sites and used in agricultural and portable buildings, the panels are easy to saw, drill, nail, plane or file. They are perfect for structural use in dry and humid conditions.

The fact that West Fraser’s SterlingOSB Zero is stronger and tougher than ply, with no knots, voids or delamination to cause problems, means that it is used widely in wall sheathing, partitioning and Structural Insulated Panels (SIPs). The high-quality boards are available in a range of grades, sheet sizes and thicknesses. Minimal finishing is required, helping to speed up construction. The boards are square-edged, so butt together easily and cleanly; nails can be driven as close as 8mm from the panel edge without causing splitting.

When incorporated as sheathing in external stud walls, SterlingOSB Zero often forms the centre of a sandwich with a vapour barrier and outer

cladding on one side and internal insulation and dry lining plasterboard on the other. Internal partitioning is even simpler to construct.

In dry lining applications, SterlingOSB Zero StrongFix provides another option for easy installation. This board product is precision engineered with a custom groove for metal C-studs at 600mm centres. The consistent density of OSB means fixtures and fittings of up to 400kg can be attached anywhere on the panel and achieve secure anchorage.

As many contractors look to decarbonise their businesses, SterlingOSB Zero provides effective solutions. Timber is highly energy efficient as a building material and can deliver low energy fabric designs, with excellent levels of thermal engineering, utilising low U-values, air-tightness and thermal bridging. West Fraser’s SterlingOSB Zero has good environmental credentials. All the panels are made in the UK, so their carbon footprint is low. It is also the first OSB product to be made in the UK with zero added formaldehyde, so it is a ‘greener’ board that meets all standards with ease.

SIPs are now the main component of many sustainable buildings. These panels incorporate a highly thermally efficient insulating foam core sandwiched between two structural facings of SterlingOSB Zero. This highperformance building system is manufactured under factory-controlled conditions and may be fabricated to fit nearly any building design. Building with SIPs saves time and improves build quality. The system is extremely strong, energy efficient and cost effective.

SterlingOSB Zero has aesthetic applications too. When left exposed, it has the advantage that it gives spaces a more natural look. Due to its raw visual appeal, designers and architects are increasingly employing the material as a creative showcase in cafes, bars, restaurants and retail outlets. It can be finished with most popular surface treatments and allows designs, logos and marketing messages to be applied.

West Fraser offers product and technical support on the SterlingOSB Zero range through dedicated advice teams.

For further information, call 01786 812 921 or visit Uk.westfraser.com

RRN721010 Norbord HP.indd 1

17/06/2021 09:28:00

COMBINED DAMP PROOFING AND SOUND REDUCTION FOR WOOD FLOORS Triton’s Platon Comfort is a highly effective, single application damp proof underlay for wood and laminate floors laid on concrete. Equally effective for renovation or new build projects, the tough polypropylene membrane can be laid directly onto a new concrete slab as soon as it is dry enough to walk on.

Platon Comfort offers three times the water vapour resistance than film membranes and eliminates the need to install a foam underlay.

Construction height is only 2.5mm so effective damp protection can be provided without any disruption to the planned floor layer build-up.

The unique stud design means they ‘give’ a little when subjected to a load, which improves walking comfort and reduces impact sound by around 17-19 dB.

RRNews - Issue 50

Platon Comfort can be overlaid with floating flooring systems such as laminate or engineered timber flooring (including glue-free systems), chipboard or plywood insulation, under floor heating systems or screed.

48

Supplied in 18m x 1m rolls, jointing of the membrane is carried out using Comfort Tape. Platon Comfort is loose laid and no special equipment is needed to cut and install.

Read more about Platon Comfort and download the installation guide here: https://www.tritonsystems.co.uk/product/platon-stop/ For further information and product samples please contact us at info@tritonsystems.co.uk or 01322 318830.

RRN5210009 Triton HP.indd 1

04/05/2021 10:59:31