Arc protection

Arc Protection

Contents All You Need To Know!

Arc Flash Training Offer Clothing Gloves Hoods & Hats

0800 4 CORYS

www.corys.co.nz

137

Electric Arc Flash Protection

All you need to know Let’s start by explaining the electrical phenomenon of an arc flash.

What does cal/cm² mean?

The arc flash is the resulting discharge of energy caused by an arcing fault. An arcing fault is the unintended flow of current through a medium not intended to carry the current. That just means that the electricity is flowing through something it shouldn’t be; in most cases that result in injury, the medium was the air. The air becomes like a piece of copper, conducting the electricity, only with the air, you can see the massive discharge of the electrons from the discharging element. This is the arc flash.

An Electric Arc Flash is normally expressed in cal/ cm², or small calories of heat energy per square centimetre. For example, the Arcguard FEPVC Overall has a 12cal/cm² ATPV electrical arc flash rating. This means that 12cal/cm² is the maximum incident energy resistance demonstrated by the FEPVC fabric, prior to break-open or at the onset of a second degree skin burn. A typical electrical arc flash can release energy levels from 4cal/cm² to 30cal/cm² and exposures between 30cal/cm² and 60cal/cm² are not uncommon.

It is lightning on a smaller yet more deadly scale. What causes an arc flash? Well, as noted above, the cause is an arcing fault. What causes an arcing fault? Many things. The most common causes of an arcing fault are equipment failure, human error (improper placement of tools or improper use of equipment), or the conduction of electricity due to foreign particles in the air (usually metal shavings).

Test reference standard

This is the standard that the Arc Protection fabric is tested to achieve the Arc Rating ASTM F1959/ F11959M-06ae1. Standard test methods for determining Arc Thermal performance of textile materials for clothing by Electric Arc Exposure method.

Test Parameters Test Current 8kA Distance to fabric 30cm Arc gap 30cm Number of samples analysed 21 per colour.

138

0800 4 CORYS

www.corys.co.nz

What is NFPA 70E?

The NFPA 70E standard is a North American standard for Electrical safety requirements for employee workplaces. The standard requires employees to wear flame resistant (FR) protective clothing, wherever there is possible exposure to an electric arc flash. It requires employers to perform a Flash Hazard Analysis to determine the flash protection boundary distance. Within the standard, there are a total of 5 Hazard Risk Categories (HRC) and each category corresponds to a cal/cm² arc rating. Transpower NZ adopted the NFPA 70E standard in September 2005. They have recognised that it is difficult for employees to perform a flash hazard analysis, so they have set the minimum requirements to Hazard Risk Category 2 (HRC 2). HRC 2 requires a minimum rating of 8 cal/cm2. Products that meet HRC 2 also meet HRC 0 and HRC 1.

Need for Protective Clothing

NFPA 70E defines necessary steps to be taken to properly prevent serious injury in the event of an arc flash accident. Simply put, NFPA 70E calls that when a worker is within the Flash Protection Boundary (the area where discharged energy is greater than 1.2 cal/cm2) he must be qualified and wearing thermally resistant and arc flash protective clothing. For training, arc flash videos are useful.

Arc Flash Clothing

Selection Picking the right type of arc flash protective clothing fortunately, has been made quite easy. First, consult the NFPA 70E compliance guide located in this catalogue to determine to which category of risk a particular activity belongs and the ATPV (arc thermal performance value) rating needed. Second, consult the Hi visibility standard AS/NZS 4602.1 2011 (or TTMC-W standard if working on or near a road or highway) to determine what type of clothing you will need based on the environment you will be working in. Once you have done all this, you are ready to contact the Arcguard team. One thing to remember when picking the protective work wear is to try and ensure that no skin is exposed. Ensure that the pant legs (if not connected to boots) completely go down to the boot. Also ensure that the sleeves of the protective work wear go down to the hand, leaving none of the arm exposed. High-voltage gloves are also necessary. And lastly, remember that the head is the most vulnerable part of the body. Don’t forget to complete the arc flash protective clothing with suitable head gear of the same ATPV rating as the rest of the work-wear.

0800 4 CORYS

www.corys.co.nz

139

Arc Protection

Ultra Lightweight Cat 4 Arc Flash Kit ARC-KIT4-SIZE

Ultra Lightweight Arc Flash Suits ARC-SUIT

Lightweight Design: reduces fatigue and heat exhaustion Rated to and/or complies with: NFPA 70E, ASTM F 2178, ASTM F 1506, AS/ NZS 4836.

Guaranteed zips and seams: Broken seams and zips cause safety risks for the wearer, don’t risk it.

Ergonomic Fit: Allows easier and more comfortable working Optional Extras: Vented Hood Colour/s: Orange Size/s: S-5XL Part Codes

Lightweight Design: reduces fatigue and heat exhaustion Rated to and/or complies with: NFPA 70E, ASTM F 2178, ASTM F 1506, AS/ NZS 4836.

Guaranteed zips and seams: Broken seams and zips cause safety risks for the wearer, don’t risk it.

Ergonomic Fit: Allows easier and more comfortable working Optional Extras: Vented Hood, Gloves, Carry Bag Colour/s: Orange Size/s: S-5XL Part Codes

ARC-KIT4-VENTED-SIZE

ARC-SUIT4-SIZE-VENT

ARC-KIT4-SIZE

ARC-SUIT4-SIZE

Arc Flash Balaclava ARC-BALACLAVA Standard/s: NFPA 70E, ASTM F2178 + F1506 Rating: 8.7cal/cm2 Colour/s: Black/Red Size/s: One Size

140

0800 4 CORYS

www.corys.co.nz

Arc Protection

Arc Flash Gloves ARC-GLOVE Standard/s: NFPA 70E, ASTM F2178 + F1506 Rating: 20cal/cm2 (Cat 2), 44cal/cm2 (Cat 4) Colour/s: Navy/Orange Size/s: One Size

Part Codes

ARC-GLOVE2 ARC-GLOVE4

Glove Bag – Small BAG-GLOVE1

Glove Bag – Large BAG-GLOVE3

Standard/s: N/A Colour: Canvas Material: Canvas Size: One Size

Standard/s: N/A Colour: Canvas Material: Canvas Size: One Size

Cotton Inners GLOVEINNER

Glove Talc GLOVETALC

Standard/s: N/A Colour: Cotton Pack Size: 4 Pairs Size: One Size

Standard/s: N/A Colour: White Fragrance: No Size: 50g

0800 4 CORYS

www.corys.co.nz

141

Arc Protection Class 00 Insulated Gloves GLOVE00

Class 0 Insulated Gloves GLOVE0

Standard/s: IEC60903 Cuff: Rolled Edge Colour: Red Length: 280mm Sizes: 8-11

Green Recycled Wrapped 2 Ply Toilet Roll

Part Codes

Part Codes

GLOVE0-08

GLOVE00-08

GLOVE0-09

GLOVE00-09

GLOVE0-10

GLOVE00-09.5

GLOVE0-11

GLOVE00-10 GLOVE00-10.5 GLOVE00-11

Class 2 Insulated Gloves GLOVE2

Class 1 Insulated Gloves GLOVE1

Standard/s: IEC60903 Cuff: Rolled Edge Colour: Black/Red Length: 410mm Sizes: 9-11

Standard/s: IEC60903 Cuff: Rolled Edge Colour: Black/Red Length: 410mm Sizes: 9-11

Quantity

Part Codes

GLOVE2-09

GLOVE1-09

GLOVE2-10

GLOVE1-10

GLOVE2-11

GLOVE1-11

142

Class 3 Insulated Gloves GLOVE3

Class 4 Insulated Gloves GLOVE4

Standard/s: IEC60903 Cuff: Rolled Edge Colour: Black/Red Length: 410mm Sizes: 10-11

Standard/s: IEC60903 Cuff: Rolled Edge Colour: Black/Red Length: 410mm Sizes: 10-11 Part Code/s:

Part Codes

Part Codes

GLOVE3-10

GLOVE4-10

GLOVE3-11

GLOVE4-11

0800 4 CORYS

www.corys.co.nz

Arc Protection

HV Leather Outers GLOVELIVELINE Standard/s: N/A Material: Cow Hide Cuff: Velcro Tightening Colour: Yellow Length: 320mm Sizes: 12-13

LV Leather Outers GLOVEOUTER Standard/s: EN488 Material: Goat Skin Cuff: Velcro Tightening Colour: Natural Length: 240mm Sizes: 8-13

Part Codes Part Codes

GLOVEOUTER-08

GLOVELIVELINE-12

GLOVEOUT-ER-09

GLOVELIVE-LINE-13

GLOVEOUTER-10 GLOVEOUTER-11 GLOVEOUTER-12

Insulated Blankets Standard/s: ASTM D1048 Voltage: 17kV (Class 2), 36kV (Class 4) Colour: Orange Size: 900mm x 900mm x 3mm

HV Proximity Tester PROXI Voltage/s: 240V, 1kV, 3.3kV, 6.6kV, 11kV, 22kV, 33kV, 66kV, 132kV, 220kV Colour: Orange

Part Codes

MAT-2-BLANKET MAT-4-BLANKET

Hot Sticks Standard/s: ASTM D178 Colour: Black Size: 1m x 1m x 9.5mm

Part Codes

STICK2M STICK8M

LV Rescue Kit KIT-LVR Standard/s: Various Colour: Hi Viz Yellow Class: 0 (Gloves) Sizes: N/A

0800 4 CORYS

www.corys.co.nz

143

Arc Protection

Class 2 Insulated Mat MAT-2

LV Insulated Mat MAT-LV

Standard/s: ASTM D178 Colour: Black Size: 1m x 1m x 6.5mm

Standard/s: AS/NZS2978:1995 Colour/s: Black Size: 1m x 1m x 6mm

Class 3 Insulated Mat MAT-3

Mat Bag/Roll MAT-BAG

Standard/s: ASTM D178 Colour: Black Size: 1m x 1m x 9.5mm

Standard/s: N/A Colour: Black Length: 1000mm

Arcguard Lightweight HRC4 Arcflash KIT KTZNFLW Available individually (coat, hood, overalls) or in kits.

Lightweight

11 oz/yd2 total fabric weight - LIGHTEST IN THE INDUSTRY! Keeps you cooler for longer with added ease of movement.

Fully Kitted Out

This Kit comes with a certified hood, 35� coat, Bib overall, Hard hat and Gear bag!

Extra Protection

This Arcguard garment provides a 44cal protection when the HRC4 standard requires 40cal protection. Higher protection at a lighter weight!

Longer coat creates better body coverage while working overhead.

Lifetime Seam Guarantee

We use a high quality thread on all our Arcguard garments. This allows us to stand behind every stitch with a lifetime guarantee.

Extra Benefits

Available as individual items. Hood with Integrated fan cooling system also available. Hood includes highly transparent Anti-fog lens.

Sizes: S-3XL Colours: Khaki green Standards: Meets the NFPA 70E Level 4 (44 cal/sq.cm) rating. ATPV rating of 44cal/sq.cm. Meets ASTM F1506-02A - Meets ASTM F1959M/F1959M-99 Made from synthetic fibre blend - FR for the life of the garment..

144

0800 4 CORYS

www.corys.co.nz

Arc Protection

Arcguard Natural Fibres Overall FTPCN • Flame Retardant, Arc Protection, Anti-static, Day/Night and TTMC-W compliant • Weaved into a 260gsm blend consisting of 88% Cotton, 11% Nylon, and 1% Carbon Antistatic Thread • YKK Plastic Vislon non-conductive two way zip • Protection placket over zipped closure • Twin stitched front and back rise (crotch) • Stress points have been bar-tacked • Twin stitched pockets • Velcro adjustment on sleeve cuff • Fire Retardant rating, guaranteed for the life of the garment, incorporating carbon thread.

Standards: All fabric complies with EN531 (A, B1, C1), EN470-1, ENV50354 (Class 1) and EN1149 2008 Anti-static. Orange fabric complies with AS/NZS 1906.4 2010 Design complies with: AS/NZS 4602.1 2011 and EN340 Day/ Night use. Orange complies with Temporary Traffic Management Control compliant (TTMC).Reflective tape complies to EN471 and EN531 (A, B1, C1) and EN470-1. Arc rating: 8.4 cal/cm² ATPV+ (according to NFPA 70E hazard risk category (HRC) levels), exceeding the 8 cal/cm² minimum requirement for HRC 2. Registered Design #409311.

Protex Flameguard™ 300gsm 100% Cotton TTMC Day/Night OverallLong Sleeve - Zipped front FTPCO • Inside breast cellphone pocket - velcro closure • Right breast pocket with flap closure • Hi Vis breast pocket with flap closure • Hanging trouser pockets • Side entry openings • Twin stitched front and back rise (crutch) • Stress points bar tacked • Twin stitched pockets, seam and waist seam • Flap to conceal and protect zips • YKK plastic vislon two way zip • FR UltraFlect retro-reflective tape Standards: Garment complies with: Flame retardant standards EN 470.1, EN 340 and EN 531.Design complies with: AS/NZS 4602.1 2011 Day/Night Use. Orange complies to TTMC. Material complies with: AS/NZS 1906.4 2010 Registered Design No# 409311

Arcguard 480gsm 100% Wool Flame Retardant TTMC-W Jacket JTPWOFR • Arc rating: 70 cal/cm ATPV • Lifetime Fire Retardant, Arc Protection • Hood designed to fit over hard-hat • Zip-off detachable hood with adjustment • Waist pockets • Zip off sleeves to turn into a vest • Large chest pocket with flap • Heavy duty 2-way zipper Sizes: S-5XL Colours: Orange/Navy Standards: Meets the NFPA 70E level 2 (8.0 cal/sq.cm) rating. ATPV rating of 70cal/sq.cm. Fabric meets the requirements of standards: EN 1SO11612:2008. A1, A2, B1, C1, F1, EN 1SO11611 Class 1, EN1149-3, EN61482 Class 1(4ka). TTMC-W Compliant. Design complies with AS/ NZS 4602.1:2011 Day/Night use. Hi Visibility fabric complies with AS/NZS 1906.4:2010. Reflective tape complies with AS/NZS 1906.4:2010, EN471 and EN469, ANSI 107 Certified. Fabric complies with EN533 & EN340.

0800 4 CORYS

www.corys.co.nz

145

Arc Protection

Arcguard 250gsm Knitted Inheratex Flame Retardant TTMC-W Polo PTBMKLS • Vents (underarm & midback) • Slimline smartphone pocket • Stretch tape • Arc rating: 10 cal/cm ATPV Standards: Garment tested & certified to Temporary Traffic Management Control - Wet (TTMC-W) code of practice. Design tested & certified to: AS/ NZS 4602:1:2011. Class D/N. Suitable for Day/Night time use. Fabric tested & certified to: AS/NZS 1906.4.2010. 10cal/cm2 arc rating, as per NFPA 70E HRC Electrical Arc flash protection - exceeds the 8 cal/cm2 arc rating requirements for HRC 2. Fabric tested according to the standard ASTM F1959/F1959M-12, Determination of the Arc rating (ATPV or EBT50) of flame resistant material clothing. Fabric tested & certified to: EN ISO 11612 Protective clothing - Clothing to protect against heat and flame. Garment exceeds: EN1149:2008 antistatic properties for protective clothing. Fabric tested & certified to: EN ISO 11611. Protective clothing for welding and allied processes.

Arcguard 240gsm Inheratex Flame Retardant TTMC-W Jacket FJPVCMW • Fire Retardant, Arc Protection, Anti-static, Day/Night and TTMC-W compliant • Weaved into a 240gsm Inheratex blend • Collar designed to stand for increased neck protection • YKK non-conductive zip • Internal zip placket to protect the wearer and external placket to protect zip • Utilities D loop • Two breast pockets with domed closures for test equipment/documents • Twin-stitched pockets to save breakdown • Double stitched fire retardant UltraFlect® tape for strength and longevity • Adjustable domed sleeve cuffs with fabric gusset for reduced exposure to arc flash • Cellphone pocket with quick access velcro tab Inheratex fabric has an inherent quick-dry moisture management • More effective shorter shoulder gusset, allowing greater movement and minimising safety risk of catching • Inherent Flame Retardant and Arc Protection rating, guaranteed for the life of the garment • Hem adjustment tab to reduce arc flash exposure to body or undergarments • Tail to prevent exposure of lower back when bending Standards: Design complies with AS/NZS 4602.1:2011 Day/Night Use & EN340. Fabric complies with ENISO 11612 (A,B1,C1), ENISO 11611, ENV50354 (Class 1) AS/NZS 1906.4:2010, TTMC-W & EN1149:2008 Reflective tape complies with AS/NZS 1906.4:2010, EN471 and ENISO 11612 (A, B1, C1) & ENISO 11611 Arc rating: ATPV=12 cal/cm² ATPV+ (according to NFPA 70E hazard risk category (HRC) levels), exceeding the 8 cal/cm² minimum requirement for HRC 2.

Sizes: Small - 5XL

Sizes: Small – 3XL, 5XL, 8XL

Arcguard 240gsm Inheratex Flame Retardant Day/Night Shirt FSPVCMW • Flame Retardant, Arc Protection, Anti-static, Day/ Night compliant.

• Weaved into a 240gsm Inheratex blend, 12 cal rated • Large plans pocket on chest with velcro closure • External cellphone pocket with velcro closure • Vented back and under arms • Uses UltraFlect superior retro-reflective fire retardant industrial tape Standards: ENISO 11612 A, B1, C1 Protective clothing to protect against heat and flame ENISO 11611 Protective clothing for use in welding and allied processes NFPA 70E HRC Electrical Arc flash protection - meets the 8 cal/cm2 Arc rating requirements for HRC 2 ATPV=12 cal/cm2 ENV50534 Electrical Arc flash protection EN1149:2008 Protective garments that comply with Electrostatic properties (anti-static) AS/NZS 4602.1:2011 Design of garment, Day/Night compliant, Class D/N AS/NZS 1906.4:2010 High Visibility Fabric and Tape complies with this standard EN471 High Visibility Fabric and Tape complies with this standard.

Sizes: Small – 4XL

146

0800 4 CORYS

www.corys.co.nz

Arc Protection

Arcguard 240gsm Inheratex Flame Retardant Night Vision Trouser FNPVCMW • Flame Retardant, Arc Protection, Anti-static • Weaved into a 240gsm Inheratex blend, 12 cal rated • Double skin knees for added comfort and longevity • Elastic waist for a comfortable fit • Cargo pockets for storage • Double bands of UltraFlect superior retro-reflective fire retardant industrial tape Standards: ENISO 11612 A, B1, C1 Protective clothing to protect against heat and flame ENISO 11611 Protective clothing for use in welding and allied processes NFPA 70E HRC Electrical Arc flash protection - meets the 8 cal/cm2 Arc rating requirements for HRC 2: ATPV=12 cal/cm2 ENV50534 Electrical Arc flash protection EN1149:2008 Protective garments that comply with Electrostatic properties (anti-static) AS/NZS 4602.1:2011 Design of garment, Day/Night compliant, Class D/N AS/NZS 1906.4:2010 High Visibility Fabric and Tape complies with this standard EN471 High Visibility Fabric and Tape complies with this standard Sizes: 77, 82, 87, 92, 97, 102, 107, 112, 117, 122

Arcguard 240gsm Inheratex Flame Retardant Hi-Vis Trouser FTPVCMW Arcguard 240gsm Inheratex Flame Retardant Trouser FCPVCMW • Elastic waist for a comfortable fit • Cargo pockets for storage • Double skin knees for added comfort and longevity • Arc rating: 12 cal/cm² AT PV Standards: 12 cal/cm2 NFPA 70E HRC Electrical Arc flash protection - exceeds the 8 cal/cm2 arc rating requirements for HRC 2. Fabric tested according to the standard ASTM F1959/F1959M-12, Determination of the Arc rating (ATPV or EBT50) of flame resistant material clothing. Fabric tested & certified to: EN ISO 11612 Protective clothing - Clothing to protect against heat and flame. Fabric tested & certified to: EN ISO 11611. Protective clothing for welding and allied processes. Garment exceeds: EN1149:2008 antistatic properties for protective clothing.

• Inherent Flame Retardant and Arc Protection rating, guaranteed for the life of the garment • Reflective tape designed to provide ultimate visibility in situations requiring a harness • Hard wearing fabric with double layer knee • Easy insert kneepad option • Ruler/tool pocket on leg • Stress points bar-tacked for strength ensuring longevity of investment • Waist pocket protection placard designed to sit flat against garment • Cargo pocket with velcro closure • Arc rating: 12 cal/cm ATPV Standards: 12cal/cm2 arc rating as per NFPA 70E HRC Electrical Arc flash protection - exceeds the 8 cal/cm2 arc rating requirements for HRC 2. Fabric tested according to the standard ASTM F1959/F1959M-12, Determination of the Arc rating (ATPV or EBT50) of flame resistant material clothing. Fabric tested & certified to: EN ISO 11612 Protective clothing - Clothing to protect against heat and flame. Garment exceeds: EN1149:2008 antistatic properties for protective clothing. Fabric tested & certified to: EN ISO 11611. Protective clothing for welding and allied processes.

Sizes: 77, 82, 87, 92, 97, 102, 107, 112, 117, 122

Sizes: 77, 82, 87, 92, 97, 102, 107, 112, 117, 122

0800 4 CORYS

www.corys.co.nz

147

Arc Protection

Arcguard 240gsm Inheratex Flame Retardant Bib Overall FBPVCMW • Two breast pockets with domed closures for test equipment/documents • Overlapped and triple-stitched front and back rise (crotch) to ensure strength in this high-stress area • Cellphone pocket with velcro closure • Easy insert kneepad option • Hard wearing fabric with double layer knee • Double stitched Fire retardant UltraFlect® tape for strength and longevity • Fire retardant reflective tape designed to provide ultimate visibility in situations requiring a harness • Inheratex fabric has an inherent quick-dry moisture managementInherent Flame Retardant and Arc Protection rating, guaranteed for the life of the garment • Stress points bar-tacked for strength ensuring longevity of investment • Waist pocket protection placard designed to sit flat against garment • Rear hip pocket with velcro closure • Ruler/tool pocket on legCargo pocket with velcro closure Standards: Fabric complies with ENISO 11612 (A,B1,C1), ENISO 11611, ENV50354 (Class 1) AS/NZS 1906.4:2010 & EN1149:2008Reflective tape complies with AS/NZS 1906.4:2010, EN471 and ENISO 11612 (A, B1, C1) & ENISO 11611.Arc rating: ATPV=12 cal/cm² (according to NFPA 70E hazard risk category (HRC) levels), meeting the 8 cal/cm² minimum requirement for HRC 2.

Sizes: 5 - 12, 14

Arcguard 240gsm Inheratex Flame Retardant TTMC-W Zip Overall FEPVCMW • Ultraflect FR Tape - the longest lasting tested and certified retro-reflective tape • Inside breast cellphone pocket - velcro closure • Roomy cargo pocket - velcro closure • Right breast pocket with flap closure • Hi Vis breast pocket with flap closure • Protection placket over zipped closure • Hanging trouser pockets • Side entry openings • Twin stitched front and back rise (crutch) • Stress points bar tacked • Twin stitched pockets, seam and waist seam • Zip openings on lower leg for ease of footwear entry • Velcro adjustment on sleeve cuff • Flap to conceal and protect zips • Two way non conductive plastic Vislon zip • UltraFlect fire retardant retro-reflective tape Standards: All fabric complies with ENISO 11612 (A, B1, C1), ENISO 11611, ENV50354 (Class 1) and EN1149:2008 Anti-static. Orange fabric complies with AS/NZS 1906.4:2010.Design complies with: AS/NZS 4602.1:2011 and EN340 Day/Night use. Design and fabric complies with TTMC-W. Reflective tape complies to EN471 and ENISO 11612 (A, B1, C1) and ENISO 11611.Arc rating: ATPV= 12 Cal/cm² (according to NFPA 70E hazard risk category (HRC) levels), exceeding the 8 Cal/cm² minimum requirement for HRC 2.

0800 4 CORYS

• Arc rating: 70 cal/cm² ATPV • Lifetime Fire Retardant, Arc Protection • Hood designed to fit over hard-hat • Zip-off detachable hood with adjustment • Waist pockets • Zip off sleeves to turn into a vest • Large chest pocket with flap • Heavy duty 2-way zipper Standards: Meets the NFPA 70E level 2 (8.0 cal/sq.cm) rating. ATPV rating of 70cal/sq.cm. Fabric meets the requirements of standards: EN 1SO11612:2008. A1, A2, B1, C1, F1, EN 1SO11611 Class 1, EN1149-3, EN61482 Class 1(4ka). TTMC-W Compliant. Design complies with AS/NZS 4602.1:2011 Day/Night use. Hi Visibility fabric complies with AS/NZS 1906.4:2010. Reflective tape complies with AS/NZS 1906.4:2010 Colour: Orange/Navy Sizes: S - 5XL

Sizes: 5 - 12, 14

148

Arcguard 480gsm 100% Wool Flame Retardant TTMC-W Jacket JTPWOFR

www.corys.co.nz