Window & Door Category
Window & Door
Shortcut to energy efficient window and door installation Penosil’s Window & Door category has a range of carefully selected products suitable for energy-efficient window and door installation. Each product in this category has a specific role. If used together in the correct sequence, these products help achieve near Zero Energy Building requirements. For window and door installation it is important to use products that have excellent thermal- and soundinsulation properties. Our Window & Door category products guarantee airtight joints and long-lasting results.
The sequence of works to follow 1. Products to use for window and door installation: Seal moveable and pressure-sensitive joints such as window and door joints with Window & Door Elastic Gunfoam 198 ■ Use Window & Door Gunfoam 55 156 and Window & Door Gunfoam 173 for all-season installation works ■
2. Products to use before or after window and door installation: ■
Use liquid membranes such as Airtight Membrane 704 or Air & Vapour Membrane 660 to moistureand air-proof window and door joints on porous and uneven surfaces
3. Products to use for glazing activities: Use Window & Door Silicone 312 and Window & Door Silicone 302 to seal joints with high movement capability, such as facade and window perimeter joints ■ Use Neutral Silicone 317 and Neutral Silicone 307 for exterior and interior glazing, filling and sealing works ■ For IG applications we recommend using our Insulating Glass Silicone 341 ■
Window & Door
Neutral Silicone 317 Neutral Silicone 307
Airtight Membrane 704 Air&Vapour Membrane 660
Window & Door Gunfoam 55 156 Window & Door Gunfoam 173
Insulating Glass Silicone 341
Window & Door Elastic Gunfoam 198
Window & Door Silicone 312 Window & Door Silicone 302
Window & Door
Window & Door Elastic Gunfoam
198
750 ml aerosol can
Low curing pressure
Colour
63 dB
Sound insulation
λ = 0.033 W/(m·K)
Thermal insulation
Airtight elastic gun foam for window and door installation Airtight structure Permanent elasticity ■ Low post expansion, no warp ■ All season (-5°C to +30°C) ■ Excellent thermal and sound insulation properties ■ Near-zero curing pressure ■ Very good adhesion on many materials ■ ■
Installing and sealing windows and doors. Sealing other pressure-sensitive, narrow and moveable joints. Insulating ventilation devices and pipe penetrations. Enhancing thermal and sound insulation. Reducing the impact of thermal bridges.
Window & Door Gunfoam
173
750 ml aerosol can
High yield
Colour
λ = 0.033 W/(m·K)
62 dB
Thermal insulation
Sound insulation
All season gun foam for filling, sealing and installation works Low curing pressure All season (-5°C to +30°C) ■ Prevents thermal bridges ■ High mechanical strength ■ High yield ■ ■
Installing and sealing windows and doors. Sealing and filling holes, gaps and connecting joints. Insulating penetrations.
All season gun foam for filling, sealing and installation works
Window & Door
Window & Door Gunfoam 55
156
750 ml aerosol can
High yield
Low curing pressure
Colour
λ = 0,033 W/(m·K)
Thermal insulation
High yield general purpose gun foam for installation works Works well in hot temperatures (up to +40°C) ■ Moderate post expansion ■ Excellent insulation properties ■ Airtight structure ■ Very good adhesion on many materials ■
Installing and sealing windows and doors. Filling and sealing holes and gaps. Sealing connecting joints. Insulating penetrations.
Air&Vapour Membrane
660 Colour
1 kg / 5 kg bucket
Elastic
Cleanable with water
Airtight
Fibre-reinforced vapour-proof mastic for sealing internal window and door joints Air and vapour proof Fibre-reinforced ■ For rough and uneven surfaces ■ Mould and UV resistant ■ Sd value 42 m ■ ■
Sealing, air- and vapour proofing internal connecting and perimeter joints e.g. window and door joints, joints between floors and walls, walls and ceilings. Sealing pipe and cable penetrations.
Window & Door
Airtight Membrane
704
600 ml foil package
Elastic
Weatherproof
Colour
Low VOC
Elastic seamless liquid membrane for sealing external window and door joints Crack-bridging ability Vapour permeable ■ Nearly no shrinkage ■ Non-corrosive ■ Sd value 1.74 m (2 mm layer) ■ ■
Air- and weatherproofing connecting joints such as window and door perimeter joints, penetrations through building envelope, etc. Protecting against humidity and various weather conditions. Can be used on horizontal and vertical surfaces.
Window & Door Silicone
312
300 ml cartridge 600 ml foil package
Weatherproof
Colour
25 % movement capability
Does not shrink
High performance neutral silicone with high movement capability High movement capability (±25 %) and permanent elasticity ■ Low elastic modulus ■ Perfect for glazing works ■ UV and age resistant ■ Excellent adhesion on a wide range of materials ■
All finishing, sanitation and ventilation sealing works. Sealing joints with high movement capability, e.g., facade and window perimeter joints. Filling, sealing, glazing interior and exterior joints. Filling and weatherproofing joints between window and door frames. F-EXT-INT-CC:25LM; G-CC:25LM; S
Window & Door
Window & Door Silicone
302
300 ml cartridge 600 ml foil package
Weatherproof
Colour
25 % movement capability
Low odour
Multipurpose zero MEKO neutral silicone for glazing, filling and sealing works MEKO Free High movement capability (±25 %) ■ Weather and ageing resistant ■ Low elastic modulus ■ Perfect for glazing works ■ ■
Sealing and weatherproofing moveable joints such as window, door, and facade joints. Filling, sealing, glazing interior and exterior joints.
F-EXT-INT-CC:25LM; G-CC:25LM; S
Neutral Silicone
317
300 ml cartridge
Weatherproof
Colour
Elastic
UV proof
LMN silicone for window and door installation Low elastic modulus Perfect for glazing works ■ Moderate movement capability ■ UV and age resistant ■ Non-corrosive ■ ■
Sealing and weatherproofing joints with moderate movement capability. Sealing window, door, and facade joints. Filling, sealing, and glazing interior and exterior joints. All finishing and sealing works. F-EXT-INT-CC: G-CC:25LM; S
Window & Door
Neutral Silicone
307
300 ml cartridge
Weatherproof
Colour
Elastic
Low odour
Zero MEKO neutral silicone for general building works MEKO Free Moderate movement capability ■ Non-corrosive ■ Weather and ageing resistant ■ Perfect for glazing works ■ ■
Sealing and weatherproofing joints with moderate movement capability. Sealing window, door, and facade joints. Filling, sealing, and glazing interior and exterior joints. F-EXT-INT-CC: G-CC
Insulating Glass Silicone
341
310 ml cartridge 600 ml foil package 20 l bucket 185 l drum
Long-lasting
Colour
High adhesion
Airtight
Neutral silicone for IG applications
Fast curing Exceptional sealing properties ■ Air and moisture resistant ■ Excellent sound insulation properties ■ Compatible with SG sealants ■ ■
Sealing and bonding the components of insulating glass units (IGUs). Improves thermal and sound insulation, condensation control, structural integrity and creates a moisture barrier.
Window & Door
FOAM: Tips and tricks Best results: ■ Make sure the working area is clean from dust, loose particles and oil stains. ■ Most PU foams need humidity to expand and cure. Spray some water mist on the surfaces to help the foam expand and cure faster. ■ Careful! You want to dampen the surface, do not wet it or the foam will not stick to the surface. ■ Wipe the surface with cloth if it’s too wet. ■ You can also mist the foam afterwards to maximise expansion and speed up the curing process. ■ In the case of larger joints, apply the foam in several layers and moisten slightly between each layer. ■ Check the foam expand percentage on the foam can’s label. Do not overfill the joints. ■ Excess foam can be cut after it has fully cured. ■ Cured foam needs to be covered with an opaque material to protect against UV rays. ■ Do not cut or cover the foam before it has fully cured. Cleaning: ■ Foam is quite sticky. Protect the adjacent surfaces with tape or paper. ■ Lay down cardboard or paper to protect the floor. ■ Have a box or piece of cardboard ready to set down the used foam can on (it can drip). ■ Uncured foam on tools and surfaces can be cleaned with Penosil Foam Cleaner 929 or acetone. ■ Uncured foam on the hands and clothes can be cleaned with Penosil Multipurpose Wipes 943. ■ Cured foam can first be softened with Penosil Foam Remover 995 and then scraped with a tool. ■ Clean the foam gun straight away after finishing. If the foam cures inside the gun, the gun will be ruined.
Screw the Penosil Foam Cleaner 929 onto the gun and spray until the liquid comes out clean. ■ Cured foam clogs the applicator tip, clean the applicator tip after every use. ■ Always use protective glasses and gloves when working with foam. ■
How to use: ■ Shake the can at least 20 times. ■ Hold the foam can in an upright position with the valve up. ■ Gun: Screw the can onto the gun. ■ Straw: Screw the straw applicator tightly onto the can valve. ■ Hold the can upside down when extruding the foam. ■ Foam output can be adjusted with the gun trigger and adjustment screw. ■ Extrude some of the initial foam (1-2 sec) to a binbag to get rid of air bubbles.
Window & Door
MEMBRANES: Tips and tricks Best results: ■ Make sure surfaces are clean, dry and free of any dust, loose particles and oil stains. ■ During the curing process, make sure that sealed surfaces stay clean and are not under mechanical stress. ■ Once cured, the product needs to be covered with a finishing material such as paint. ■ Uncured product can be removed with Penosil Multipurpose Wipes 943. ■ Cured product can be removed mechanically. How to use:
Airtight Membrane 704 Place the package into the foil pack gun. ■ Snip off the top of the foil package, just below the metal clip. ■ Screw on the nozzle together with the cap. ■ Cut an opening to the nozzle at a 45° angle which is slightly larger than the joint to be sealed. ■ Apply by keeping even pressure at the gun trigger and smoothly dragging the nozzle along the joint. ■ Remove the excess product and smooth the surface with a putty knife or a flat brush so that the membrane layer stays at least 1mm thick. ■
Air & Vapour Membrane 660 Open the bucket and stir the mixture. Do not dilute it! ■ Use a paint brush to apply the mastic in an even layer to the surface. ■ Apply the product in two layers. ■ Let it dry at least 1 hour before applying the second layer. ■ When applying the second layer, if possible, make the brush strokes in a different direction than previously. This will reinforce the mastic's structure. ■
SEALANTS: Tips and tricks Best results: ■ Make sure surfaces are clean, dry and free from any dust, loose particles and oil stains. ■ Use a vacuum cleaner to clean the deeper joints. ■ Cover the adjacent surfaces with masking tape to ensure crisp and clean joint edges. ■ During the curing process, make sure that sealed surfaces stay clean and are not under mechanical stress. ■ For best finishing, use an appropriate smoothing tool. How to use: ■ Cut the tip of the cartridge. ■ Screw on the nozzle and cut an opening at a 45° angle which is slightly larger than the joint to be sealed. ■ Place the cartridge into a sealant gun. ■ Apply the sealant by keeping an even pressure at the gun trigger and smoothly dragging the nozzle along the joint. ■ Remove the excess sealant and smooth the surface with a spatula. ■ Remove the tape immediately after application and clean the adjacent surfaces, tools and hands with water or Penosil Multipurpose Wipes 943.
Suitable for:
Window & Door Elastic Gunfoam 198
Window & Door Gunfoam 173
Window & Door Gunfoam 55 156
Window & Door
Plasterboard
●
●
●
Concrete
●
●
●
Bricks
●
●
●
Wood
●
●
●
Masonry
●
●
●
Metals
●
●
●
PVC
●
●
●
EPS
●
●
●
Varnished and painted surfaces
●
●
●
Ceramic tiles
Glass Glazed surfaces Laminated glass Low-e glass Solar control glass Warm edge spacers Enamel
Polycarbonates EPDM
Window & Door Silicone 312 Neutral Silicone 307 Neutral Silicone 317
● ● ● ● ● ●
● ● ● ● ● ●
● ● ● ● ●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
● Insulating Glass Silicone 341
Window & Door Silicone 302
Air & Vapour Membrane 660 Airtight Membrane 704
●
●
●
●
●
●
●
Window & Door
Our other categories are: General Construction Roof & Facade Sanitary Decoration Fireproofing/ High Temperature Adhering Cleaning Sustainable Construction
penosil.com/uk Wolf Group UK Trading Ltd Bizhub 203 Bridgewat er Complex, Canal Street, Liverpool, Merseyside, L20 8AH, United Kingdom Phone +44 151 550 0179 info.uk@wolf-group.com