PENOSIL Guns & Applicators

TOOLBOX

GUNS & APPLICATORS

FOAM GUNS 30% OF FOAM STRUCTURE AND OUTCOME DEPENDS ON GUN. For the best results it´s not enough to have the best foam, but also the best foam gun.

We have chosen the best foam guns in 3 price levels and also special gun for deep joints and floor works.

PENOSIL FoamGun G1

Golden choice for proffesionals EP0044

Important properties of all PENOSIL foam guns ■■ A strong and durable design combined with light weight.

■■ Easy and effortless handling.

■■ Economical use of foam since the foam can precisely dosed.

■■ Convenient adjustment of the foam flow with the screw on

the rear of the gun. Turning the adjustment wheel clockwise reduces the flow and gives thinner layer of the foam.

Turning the adjustment wheel counterclockwise increases the flow to obtain thicker layer of the foam.

■■ The universal adapter with a Teflon exterior that facilitates cleaning.

ADVANTAGES OF THE FOAM GUN ■■ Nickel-plated metal body with a light nylon handle ■■ Long and thin barrel mouth which can be fitted

with extensions

■■ Length of extrusion rod: 185 mm ■■ Resistant to solvents ■■ The stainless steel needle with the Teflon-coated

exterior prevents the foam from sticking

■■ The foam gun comes with 2 barrel extensions:

length 200 mm and Ø 7x5 mm

■■ Light, weight 342 g

PENOSIL FoamGun P1

Premium choice for professionals EP0071 (EP0057)

ADVANTAGES OF THE FOAM GUN ■■ Long barrel for deep joints ■■ Resistant to solvents, with a light rubber-coated

handle

■■ The extrusion rod is made of a single part in order

to increase the gun’s rigidity and durability, and to guarantee a perfect, tight and hermetic connection between the needle and barrel mouth in every situation ■■ The foam gun comes with 4 barrel extensions: 200 mm extension (2 pcs), 50 mm extension (2 pcs) ■■ Weight 412 g

PENOSIL FoamGun S1

PENOSIL high standard choice for professionals and home users EP0070 (EP0045)

ADVANTAGES OF THE FOAM GUN ■■ Economical to use since the foam can be precisely

dosed

■■ Resistant to solvents, with a light rubber-coated handle ■■ The universal adapter with a Teflon exterior facilitates

cleaning

■■ The stainless steel needle with the Teflon-coated

exterior prevents the foam from sticking

■■ The foam gun comes with 4 barrel extensions:

200 mm extension (2 pcs), 50 mm extension (2 pcs)

■■ Weight 389 g

PENOSIL FoamGun C1 campaign gun for retail and wholesale campaigns EP0072 (EP0064)

ADVANTAGES OF THE FOAM GUN ■■ A strong and durable design ■■ Sharpened stainless steel needle ■■ The foam gun comes with 4 barrel extensions:

200 mm extension (2 pcs), 50 mm extension (2 pcs)

■■ Resistant to solvents ■■ Weight 373 g

PENOSIL FoamGun LongTube special gun for professional users EP0066

ADVANTAGES OF THE FOAM GUN ■■ Especially long extrusion pipe for deep joints

or convenient filling of floor joints

■■ A strong and durable design ■■ Adjustable foam flow ■■ Weight 1022 g

SEALANT & ADHESIVE GUNS FOR THE BEST USER EXPERIENCE it´s not enough to have the best sealant, but also proper gun.

Important properties of all PENOSIL sealant & adhesive guns ■■ A strong and durable design combined with light weight.

■■ Easy and effortless handling.

■■ Economical use of material due to precise dosage.

■■ Holds product securely and extrudes smoothly with easy

to control bead.

PENOSIL Cartridge Gun

EP0067

ADVANTAGES OF THE CARTRIDGE GUN ■■ Light weight aluminum handle and trigger ■■ Holds product securely and extrudes smoothly

with easy to control bead.

■■ Rotating frame ■■ Low density sintered drive plate 9 mm ■■ Hook to hang gun on belt or for easy storage ■■ Weight 680 g

Professional handgun for 310 ml cartridges (silicones, adhesives and mastics). Can be used for both plastic and aluminum cartridges.

PENOSIL Sealant Manual Gun EP0002

ADVANTAGES OF THE SEALANT MANUAL GUN ■■ Tempered rod and pushing plate makes the gun

strong enough for all cartridge types.

■■ The load on fingers is reduced by effectively

lowering the gearing.

■■ Dripless system which can be turned on/off,

to avoid drip of material

■■ Handgrip and hook are rubber dipped ■■ Rotating frame ■■ Pushing power up to 15 bar ■■ Weight 760 g

Professional handgun for cartridges (silicones, adhesives and mastics). Can be used for all types of cartridges.

Cartridges up to 310 ml.

PENOSIL Sealant Foil Pack Gun

EP0003

ADVANTAGES OF THE FOIL PACK GUN ■■ Professional handle gun

for 300-400-600 ml soft packs.

■■ Tempered clutch and pushing rod ■■ Pushing power up to 15 bar ■■ Thrust ratio: 18:1–4,5 mm / advanced shoot ■■ Aluminium tube and ring nuts ■■ Rotating tube ■■ Weight 1119 g

PENOSIL Foil Pack Pneumatic Gun EP0028

ADVANTAGES OF THE FOIL PACK PNEUMATIC GUN ■■ Professional pneumatic applicator

for 300-400-600 ml soft packs.

■■ Pushing power up to 8 bar ■■ Pressure: 4–8 bar (10 bar max) ■■ Length of tube: 370 mm ■■ Connection: ¼ male gas ■■ Noise level: <80 dB ■■ Pressure reducer integrated ■■ Weight 1100 g

PENOSIL Cartridge Applicator 5-pack MA089

ADVANTAGES OF THE CARTRIDGE APPLICATOR ■■ Compatible with all standard cartridges ■■ Replacement nozzles allow for versatile

application- varying bead widths.

■■ Replacement nozzles allow repeated use

from the same cartridge.

■■ 5 pc in a set

PENOSIL EasyGun Applicator 5-pack

ADVANTAGES OF THE Easygun APPLICATOR

MA036

■■ Reach to everywhere ■■ Economic and precise dosing ■■ Ensures highly qualified foam ■■ Structure ■■ Gives much higher yield ■■ Ergonomic design / re-usable

PENOSIL Foam Straw 5-pack

ADVANTAGES OF THE Foam STRAW

MA090

■■ Foam applicator with optimised straw diameter

allows easy and economical use

■■ Good foam outflow and accurate dosage ■■ Tight foam structure and small post-expansion

PENOSIL Renovation Kit

■■ This simple and convenient kit includes everything

needed, except a sealant gun, to renovate joints.

■■ A professional result with the first use. Thanks

to the elaborated design of the tools no preliminary experience is needed.

ADVANTAGES OF THE SCRAPER

ADVANTAGES OF THE SPATULA

■■ Easy and convenient

■■ Adjustable for various joint sizes ■■ Fast and easy to handle ■■ Clean finish and permanent sealing ■■ Works as a nozzle cap ■■ Ergonomic design / re-usable

mechanical removal ■■ Extra sharp and durable ■■ Saves valuable time and effort ■■ No surface damage ■■ Ergonomic design / re-usable

APPLICATION INSTRUCTION FOR FOAM GUN Hold the foam can in an upright position, turn the gun to the can by holding the gun handle with one hand, and turn the can with the other hand. Make sure that the gun is not pointed to yourself or other persons when turning it. The can must not be screwed to the gun with the valve upside down or by turning the gun on the can.

After fixing the gun, shake the can well at least 20 times and turn into working position.

The foam output can be adjusted using the gun trigger.

Recommendations for the use of construction foams ■■ A previously moistened surface ensures faster curing of the foam and a better result.

■■ At low temperatures the foam canister must be warmed before work in a warm room or water.

The temperature of the room or water must not exceed 30°C.

■■ In the application position the can is upside down.

■■ Point the gun or the straw end into the joint, press the trigger and apply the foam to required places.

■■ The amount of foam can be adjusted by the pressure to the trigger.

APPLICATION INSTRUCTIONS FOR SEALANTS AND ADHESIVES 310 ml cartridge: Cut off the threaded end of the cartridge and screw on the application nozzle for directing acrylic. Cut the threaded end in a way where a suitable opening for application is produced. Place the cartridge together with the applicator in the gun and fill the installation nozzle with acrylic, by repeatedly pressing the gun trigger. Apply acrylic in the joint by repeatedly and evenly pressing on gun trigger and smoothly dragging the nozzle continuously along the joint. After applying the acrylic, smoothen it with a rubber acrylic scraper.

Remove excess acrylic.

600 ml foil package: Open the application nozzle of the gun, insert the package in the gun and open on the applicator side by removing the fastening clamp. Place the applicator nozzle on the opened end and screw on the cap. Apply acrylic in the joint by repeatedly and evenly pressing on gun trigger and smoothly dragging the nozzle along the joint. After application, smooth the acrylic surface with a rubber silicone scraper and remove excess material.