Issuu

PU-Foams Sealants Caulking materials Adhesives Surface Treatments

Product guide General introduction

Penosil’s construction foam with a patented EasyGun applicator also proved to be another great success. Its unique patented applicator was developed in cooperation with a well-known industrial designer and is still used today as the world’s most inexpensive foam gun. Our fire insulation foams comply with the European fire class standard, and have been issued individual certificates according to special requirements established in various countries.

sealants

It was established in its present form in 2005, and launched in 2006. The history of its products reaches back to as early as 1998 when the production of construction foams was started in Estonia, Northern Europe. Penosil’s reputation on many markets increased significantly in 2003 with the launch of GoldGun – a unique and revolutionary construction foam with a thick and even structure and low post-expansion. This product signalled the arrival of a new generation of construction foams and immediately emerged among building professionals as the new quality standard.

PU foams

Penosil is a chemical building supplies brand that stands for Scandinavian design, as well as high and consistent quality.

Joint sealants are followed by construction adhesives, surface treatments and cleaners. Penosil’s product portfolio has gained recognition in over 30 countries and is known for its high and consistent quality and wide product selection, satisfying the needs of home users, as well as professional builders. Penosil’s products and advertising materials use minimalistic Scandinavian design and present information that is precise in technical terms. For more complex products, we have developed step-by-step user instructions and videos. Marketing is supported by a clear and well-thought-out retail concept. The Penosil brand belongs to the Wolf Group, which includes marketing and manufacturing companies from 12 countries, including Olivé and Tempsi.

construction adhesives

In our catalogue, products have been organised on the basis of their field of application, starting from joint sealants, which are divided into construction foams, silicones and specialty sealants.

surface treatments

Regular quality control of all batches has a vital part in our production cycle. All development, production and marketing operations comply with ISO 9001 and 14001 standards. We always give priority to environmentally friendly and clean materials and processes.

Cleaners

Product development is carried out by top development chemical specialists in Penosil’s labs in Tallinn, Pärnu and Barcelona in close cooperation with suppliers, universities and research institutions.

SEALANT Tapes

In recent years, our product development has been focused on environmentally friendly and first-class hybrid sealants and adhesives that are gradually being introduced instead of traditional materials.

Product guide General introduction

All product groups are represented by three ranges: Gold, Premium and Standard. The Gold range products are for professionals, very particular about quality, and for working in extreme conditions. The Premium range products are intended for a variety of construction work. These are created for building professionals and can be used in demanding conditions, for example, in winter or when it is raining. The selection is wide and includes a number of special-purpose products. The Standard range includes basic products with a wide field of application. These include high-quality foams and silicones that are routinely used in large quantities and are developed for working in regular conditions. All products comply with established standards and have been tested according to FEICA methods to achieve comprehensible, comparable and reproducible test results, providing consumers with detailed information on product properties and behaviour. FEICA is a multinational association representing the European adhesive and sealant industry, including one-component foam manufacturers.

GAP FILLING │ PU-foams General introduction

A PU-foam is a substance that, when being released from the can, expands due to air humidity and forms a porous material with good temperature and sound insulation properties. The foam has very strong adhesive properties, it sticks well to most building materials, except teflon, polyethylene, polypropylene and silicone surfaces. UV-radiation will destroy the foam structure over time, therefore, the foam should be covered or painted. When protected from UV-radiation, the foam is ageing proof and withstands big temperature and moisture fluctuations. Based on usage, construction foams can be divided in two types. For home users who seldom use foam, straw foams are suitable. For more accurate jobs and big volumes gun foams are suitable that should be applied with a special foam gun. Applying foam with a gun is more accurate and economical. The foam structure is more dense and even when using a foam gun, and the post expansion is lower. Penosil assortment also includes the EasyGun foam that can be used with the unique EasyGun applicator included in the delivery. The applicator is similar to a straw, but is narrower, more accurate and economic due to its special design, giving the foam a structure similar to gun foam. The use of EasyGun is very simple, easy and comfortable. The foam can has a regular gun adapter and the EasyGun foam can be used with a gun as well.

Fields of application of PU-foams: ■■ Installation of doors and windows. ■■ Insulation and fixing of pipes in feedthroughs. ■■ Filling and insulation of holes and gaps. ■■ Thermo and sound insulation.

GAP FILLING │ PU-foams General introduction

Recommendations for the use of construction foams: ■■ The can should be stored in upper position between +5 °C and +30 °C. Avoid exceeding 50 °C, even for short periods, vicinity of heat sources and direct sunlight. ■■ In case of low air humidity (under 50% RH), the substrate should be moistened as the foam expands due to the moisture. A moistened surface ensures better results. ■■ The surfaces must be clean from dust, loose particles and oil. ■■ The suitable temperature for air and processed surfaces is between +5 °C and +30 °C. For low temperatures (down to -18 °C), there are special winter foams available. In extreme situations, the application properties and the foam structure may be harmed. ■■ Before application, the foam can should be shaken well for at least 20 seconds so that the ingredients can mix thoroughly, thus creating a good foam structure. ■■ Remove the cap and screw the valve to the outlet straw or gun valve, thereby, the can should be hold upright, bottom down. The gun hose or straw end should be kept in its place in a safe direction. ■■ In the application position the can is upside down. ■■ Point the gun or the straw end into the joint, press the trigger and apply the foam to required places. ■■ The amount of foam can be adjusted by the pressure to the trigger. ■■ Fill the joint evenly by moving the applicator with zigzag movements from the bottom to the top. ■■ In case of deep joints, start from the bottom of the joint and cover the base, then apply a second layer of the foam. ■■ The joint should be filled to 2/3 of the volume with gun foam and to half of the volume with straw foam, so that the foam can expand sufficiently. ■■ Window and door jambs should be supported before, the supports can be removed in 12–14 hours. ■■ The foam cures within a few hours, touch dryness is achieved in approx. 20 minutes, full curing in 24 h at the latest. ■■ Overexpanded foam can be pressed into the joint with a finger, bigger amounts can be removed with a knife after curing. ■■ In case of pauses in work, the hose end should be cleaned in order to avoid the foam curing on it. ■■ After work pauses or in case of longer working sessions, the foam can should be shaken in order to mix the ingredients and to ensure its good structure up to the end of the work. ■■ Soft foam can be removed with special moisturized Premium Cleaning Wipes or the Premium Foam Cleaner in an aerosol can. The cured foam can be removed mechanically or with the Premium Foam Remover.

GUNFOAM USAGE

>20 ×

STRAW FOAM USAGE

Security measures when working with PU-foam: ■■ The regular PU-foam contains isocyanates which can cause hypersensitivity, irritate eyes and skin. The concentration of isocyanates in the foam is very low and generally has no effect; however, good ventilation should be ensured when working in closed rooms for a longer time. ■■ As the can is under pressure and inflammable, the foam should be protected from overheating and be kept away from ignition sources; during work, direct sunlight and smoking should be avoided. ■■ Eye protection and gloves should be worn during work. In case of skin contact, remove the foam immediately with moisturised Penosil Premium Cleaning Wipes or a dry tissue. Cured foam cannot be removed and will only wear off. ■■ Keep the foam cans out of reach of children. ■■ Foam cans must be stored and transported in upright position only.

GAP FILLING │ PU foams │ GUN FOAMS PENOSIL GOLDGUN and GOLDGUN WINTER

Gun foam with the highest stable quality, suitable for even most demanding users and rough conditions. ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■

Strong construction foam with very even and dense structure. Suitable for various conditions. Fast curing. Reduced post-expansion. Allows accurate dosage and economic usage. Strong adhesion. For high-quality works. Application with foam gun.

–5...+30 °C GoldGun

–18...+30 °C GoldGun Winter

Colour Package 1000 ml aerosol can, content 750 ml, 12 cans in a box

Field of application

Application conditions

■■ Works demanding highest quality standard. ■■ Installation and insulation of doors and windows. ■■ Fixation of wall panels, insulation boards, roof tiles. ■■ Filling of holes and gaps, insulation of joints. ■■ Thermo and sound insulation.

■■ Air temperature during application -5 °C to +30 °C, winter foam -18 °C to +30 °C, best results at +20 °C. ■■ Can temperature during application +5 °C to +25 °C, best results at +20 °C. ■■ The surfaces must be clean from dust, loose particles and oil. ■■ Cured foam can be painted with water-based paints.

GAP FILLING │ PU foams │ GUN FOAMS PENOSIL GOLDGUN and GOLDGUN WINTER

Technical specification PROPERTY

UNIT

VALUE

Tack free time

minute

8-10

Cutting time

minute

25-30

hour

up to 12 up to 18 up to 24

kg/m3

20-25

Completely cured in joint

+23 °C +5 °C GoldGun -5 °C GoldGun Winter

Density Fire class of cured foam (DIN 41021)

Volume decrease

non

Post-expansion

up to 30

Flash point of cured foam

°C

400

Tensile strength (BS 5241)

N/cm2

Curing Pressure (TM1009)

kPa

3,2

Thermal conductivity

W/m·K

0,034

Sound reduction index

°C

-50 to +90 -65 to +110

Temperature resistance of cured foam

long term short term

Application instruction Hold the foam can in upright position and turn the gun side by holding the gun handle with one hand and turn the can with the other hand. Make sure that the gun is not pointed to other persons when turning it. The can must not be screwed to the gun with the valve upside down or by turning the gun on the can. After fixing the gun, shake the can well at least 20 times. The foam output can be adjusted by gun trigger.

Recommendation Foam gun PENOSIL FoamGun G1.

The values specified were obtained at 23 °C and 50% relative humidity, unless otherwise specified.

Cleaning ■■ Uncured foam can be cleaned with PENOSIL Premium Foam Cleaner. ■■ Cured foam can be removed with PENOSIL Premium Foam Remover. ■■ Hands, clothes and foam gun can be cleaned from uncured foam with moistened PENOSIL Premium Cleaning Wipes.

Safety requirements The product is flammable. Protect from overheating and keep away from ignitions sources. Avoid direct sunlight and do not smoke at work. May cause sensitisation by inhalation and skin contact. Ensure sufficient ventilation during application. Wear safety glasses and gloves. Keep out of the reach of children. Cured foam can be handled without any danger to health.

Storage The cans must be stored and transported in vertical position. Store in a cool and dry place at +5 °C to +30 °C. The foam cans must not be stored above +50 °C, in vicinity of heat sources or in direct sun light. Guaranteed storage time in unopened package 18 months.

GAP FILLING │ PU foams │ GUN FOAMS PENOSIL GOLDGUN 65 and GOLDGUN 65 WINTER

Gun foam with the highest stable quality and increased output, suitable for even most demanding users and rough conditions. ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■

Output 30% higher than regular foam. Strong construction foam with very even and dense structure. Suitable for various conditions. Fast curing. Reduced post-expansion. Allows accurate dosage and economic usage. Strong adhesion. For high-quality works. Application with foam gun.

–5...+30 °C GoldGun 65

–18...+30 °C GoldGun 65 Winter

Colour Package 1000 ml aerosol can, content 900 ml, 12 cans in a box

Field of application

Application conditions

■■ Works demanding highest quality standard. ■■ Voluminous works with high foam consumption. ■■ Installation and insulation of doors and windows. ■■ Fixation of wall panels, insulation boards, roof tiles. ■■ Filling of holes and gaps, insulation of joints. ■■ Thermo and sound insulation.

■■ Air temperature during application -5 °C to +30 °C, winter foam -18 °C to +30 °C, best results at +20 °C. ■■ Can temperature during application +5 °C to +25 °C, best results at +20 °C. ■■ The surfaces to be insulated must be clean from dust, loose particles and oil. ■■ Cured foam can be painted with water-based paints.

GAP FILLING │ PU foams │ GUN FOAMS PENOSIL GOLDGUN 65 and GOLDGUN 65 WINTER

Technical specification PROPERTY

UNIT

VALUE

Tack free time

minute

8-10

Cutting time

GoldGun 65 GoldGun 65 Winter

minute

30-35 25-30

Completely cured in joint

+23 °C +5 °C GoldGun 65 -5 °C GoldGun 65 Winter

hour

up to 12 up to 18

Density

up to 24 kg/m3

Fire class of cured foam (DIN 4102-1)

20-25 B3

Volume decrease

non

Recommendation

Post-expansion

up to 30

Foam gun PENOSIL FoamGun G1.

Flash point of cured foam

°C

400

Tensile strength (BS 5241)

N/cm2

Compression strength at 10% deformation (DIN 53421)

N/cm2

2,5

Thermal conductivity

W/m·K

0,034

Sound reduction index

°C

-50 to +90 -65 to +110

Temperature resistance of cured foam

long term short term

The values specified were obtained at 23 °C and 50% relative humidity, unless otherwise specified.

GAP FILLING │ PU foams │ GUN FOAMS PENOSIL GOLDGUN LOW EXPANSION ALL SEASON

Gun foam with the highest stable quality and especially low expansion pressure for filling pressure-sensitive joints. Suitable for most demanding users and rough conditions. ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■

Especially low expansion pressure and minimum post-expansion. Strong construction foam with very even and dense structure. Suitable for various conditions. Fast curing. Allows accurate dosage and economic usage. Strong adhesion. For high-quality works. Application with foam gun.

Colour Package 1000 ml aerosol can, content 750 ml, 12 cans in a box

Field of application

Application conditions

■■ Works demanding highest quality standard. ■■ Filling of pressure-sensitive joints. ■■ Installation and insulation of doors and windows. ■■ Fixation of wall panels, insulation boards, roof tiles. ■■ Filling of holes and gaps, insulation of joints. ■■ Thermo and sound insulation.

■■ Air temperature during application -10 °C to +30 °C, best results at +20 °C. ■■ Can temperature during application +5 °C to +25 °C, best results at +20 °C. ■■ The surfaces to be insulated must be clean from dust, loose particles and oil. ■■ Cured foam can be painted with water-based paints.

GAP FILLING │ PU foams │ GUN FOAMS PENOSIL GOLDGUN LOW EXPANSION ALL SEASON

Technical specification PROPERTY

UNIT

VALUE

Tack free time

minute

8-10

Cutting time

minute

30-35

hour

up to 12 up to 18

kg/m3

20-25

Completely cured in joint

+23 °C +5 °C

Density Fire class of cured foam (DIN 4102-1)

Volume decrease

non

Post-expansion

up to 20

Flash point of cured foam

°C

400

Recommendation

Tensile strength (BS 5241)

N/cm2

Foam gun PENOSIL FoamGun G1.

Compression strength at 10% deformation (DIN 53421)

N/cm

2,5

Thermal conductivity

W/m·K

0,034

Sound reduction index

°C

-50 to +90 -65 to +110

Temperature resistance of cured foam

long term short term

The values specified were obtained at 23 °C and 50% relative humidity, unless otherwise specified.

GAP FILLING │ PU foams │ GUN FOAMS PENOSIL GOLDGUN 65 Plus ALL SEASON

Gun foam with the highest stable quality and increased output, suitable for even most demanding users and rough conditions. +43% +43% more foam +43% vahtu rohkem rohkem vahtuThe yield of a regular can is 43% higher than is usual with +43% standard PU-foams. +43% rohkem +43% vahtu rohkem rohkem vahtu vahtu

Controlled secondary expansion Maximal immediate expansion – after yield the foam expands

Minimaalne immediately, which enables accurate dosage and savings in Minimaalne järelpaisumine järelpaisumineusage. At the same time, the foam does not cause overexpansion of gentle structures. Minimaalne Minimaalne järelpaisumine Minimaalne järelpaisumine järelpaisumine Five-step quality control The raw material for the foam is purchased from carefully selected European suppliers and has all the required certificates Viieastmeline Viieastmeline and declarations of conformity; the acceptance and storage kvaliteedikontroll of raw materials and the whole production process meets the kvaliteedikontroll ISO 9001 and ISO 14001 quality and environmental requireViieastmeline ments; products are packed, stored and transported under Viieastmeline kvaliteedikontroll Viieastmeline controlled conditions and in accordance with quality and enkvaliteedikontroll kvaliteedikontroll vironmental standards; samples of all batches are stored in laboratory for 18 months, follow-up tests can be made in order to verify quality.

Intelligentsed Intelligentsed Intelligent cells osakesed osakesed Intelligentsed The foam fills all cracks and cavities irrespective of their direcIntelligentsed osakesed Intelligentsed tion and shape. At the same time, the foam does not cause osakesed overexpansion of gentle structure nor does it need additional osakesed moisturising for expansion.

Ökoloogiline Ökoloogiline koostis koostis Ökoloogiline Ökoloogiline koostis Ökoloogiline koostis koostis

Colour Package

Ecologic formulation GoldGun 65 Plus does not contain CFC- or HCFC-gases harmful for the environment, that are usual components of PU-foams. As all Penosil foams. GoldGun 65 Plus does not destroy the ozone layer.

1000 ml aerosol can, content 850 ml, 12 cans in a box

Field of application

Application conditions

■■ Works demanding highest quality standard. ■■ Voluminous works with high foam consumption. ■■ Installation and insulation of doors and windows. ■■ Fixation of wall panels and insulation boards. ■■ Filling of holes, cracks and gaps, insulation of joints in concrete, plasterboards, brick walls, wood. ■■ Insulation and fixation of pipes in openings. ■■ Thermo and sound insulation.

■■ Air temperature during application -20 °C to +30 °C, best results at +20 °C. ■■ Can temperature during application +5° C to +25 °C, best results at +20 °C. ■■ The surfaces must be clean from dust, loose particles and oil. ■■ Cured foam can be painted with water-based paints.

GAP FILLING │ PU foams │ GUN FOAMS PENOSIL GOLDGUN 65 Plus ALL SEASON

Technical specification PROPERTY

UNIT

VALUE

Tack free time

minute

8-10

Cutting time

minute

25-30

hour

up to 12 up to 18

kg/m3

17-20

Completely cured in joint

+23 °C +5 °C

Density Fire class of cured foam (DIN 4102-1)

Volume decrease

non

Post-expansion

up to 30

Flash point of cured foam

°C

400

Recommendation

Tensile strength (BS 5241)

N/cm2

Foam gun PENOSIL FoamGun G1.

Compression strength at 10% deformation (DIN 53421)

N/cm

2,5

Thermal conductivity

W/m·K

0,034

Sound reduction index

°C

-50 to +90 -65 to +110

Temperature resistance of cured foam

long term short term

The values specified were obtained at 23 °C and 50% relative humidity, unless otherwise specified.

GAP FILLING │ PU foams │ GUN FOAMS PENOSIL PREMIUM GUNFOAM and PREMIUM GUNFOAM WINTER

High-quality professional gun foam with low post-expansion for demanding users. Even structure and low post-expansion. ■■ Very good adherence on various building materials. ■■ High-quality result under various weather conditions. ■■ Application with foam gun. ■■

+5...+30 °C Gunfoam

–10...+30 °C Gunfoam Winter

Colour Package 1000 ml aerosol can, content 750 ml, 12 cans in a box

Field of application

Application conditions

■■ Installation and insulation of doors and windows. ■■ Insulation and fixation of pipes. ■■ Filling of holes and gaps, insulation of joints. ■■ Thermo and sound insulation.

■■ Air temperature during application +5 °C to +30 °C, winter foam -10 °C to +30 °C, best results at +20 °C. ■■ Can temperature during application +5 °C to +25 °C, best results at +20 °C. ■■ Yield considerably depends on working conditions – temperature, air humidity, expansion room. ■■ The surfaces must be clean from dust, loose particles and oil. ■■ Cured foam can be painted with water-based paints.

GAP FILLING │ PU foams │ GUN FOAMS PENOSIL PREMIUM GUNFOAM and PREMIUM GUNFOAM WINTER

Technical specification PROPERTY

UNIT

VALUE

Tack free time

minute

10-12

Cutting time

minute

30-35

Completely cured in joint +23 °C hour +5 °C Pr. GunFoam -5 °C Pr. GunFoam Winter

up to 12 up to 20 up to 24

Density

20-25

kg/m3

Fire class of cured foam (DIN 4102-1)

Volume decrease

non

Post-expansion

up to 33

Flash point of cured foam

°C

400

Tensile strength (BS 5241)

N/cm2

Compression strength at 10% deformation (DIN 53421)

N/cm

Thermal conductivity

W/m·K

0,034

Sound reduction index

°C

-50 to +90 -65 to +110

Temperature resistance of cured foam

Recommendation Foam gun PENOSIL FoamGun P1.

long term short term

The values specified were obtained at 23 °C and 50% relative humidity, unless otherwise specified.

GAP FILLING │ PU foams │ GUN FOAMS PENOSIL PREMIUM GUNFOAM 65 and PREMIUM GUNFOAM 65 WINTER

High-quality gun foam with considerably higher output and low post-expansion for demanding users. Output 30% higher than regular foam. Even structure and low post-expansion. ■■ Very good adhesive properties. ■■ High-quality result under various weather conditions. ■■ Application with foam gun. ■■ ■■

+5...+30 °C GunFoam 65

–10...+30 °C GunFoam 65 Winter

Colour Package 1000 ml aerosol can, content 900 ml, 12 cans in a box

Field of application

Application conditions

■■ Installation and insulation of doors and windows. ■■ Insulation and fixation of pipes. ■■ Filling of holes and gaps, insulation of joints. ■■ Thermo and sound insulation.

■■ Air temperature during application +5 °C to +30 °C, winter foam -10 °C to +30 °C, best results at +20 °C. ■■ Can temperature during application +5 °C to +25 °C, best results at +20 °C. ■■ Yield considerably depends on working conditions – temperature, air humidity, expansion room. ■■ The surfaces to be insulated must be clean from dust, loose particles and oil. ■■ Cured foam can be painted with water-based paints.

GAP FILLING │ PU foams │ GUN FOAMS PENOSIL PREMIUM GUNFOAM 65 and PREMIUM GUNFOAM 65 WINTER

Technical specification PROPERTY

UNIT

VALUE

Tack free time

minute

10-12

Cutting time

minute

30-35

Completely cured in joint

+23 °C hour +5 °C Pr. GunFoam 65 -5 °C Pr. GunFoam 65 Winter

Density

up to 12 up to 20 up to 24

kg/m3

Fire class of cured foam (DIN 4102-1)

20-25 B3

Volume decrease

non

Post-expansion

up to 33

Flash point of cured foam

°C

400

Tensile strength (BS 5241)

N/cm

Compression strength at 10% deformation (DIN 53421)

N/cm2

Thermal conductivity

W/m·K

0,034

Sound reduction index

°C

-50 to +90 -65 to +110

Temperature resistance of cured foam

long term short term

Recommendation Foam gun PENOSIL FoamGun P1.

The values specified were obtained at 23 °C and 50% relative humidity, unless otherwise specified.

GAP FILLING │ PU foams │ GUN FOAMS PENOSIL PREMIUM FIRE RATED GUNFOAM B1

Professional fire protection foam with low post-expansion for demanding users. Fire resistance is tested according to European standard EN 1366-4 and reaction to fire according to standard DIN 4102-1. Fire resistance is rated in accordance with EN 13501-2. ■■ ■■ ■■ ■■ ■■ ■■ ■■

Certified construction foam with high fire resistance. Even structure and low post-expansion. Good resistance to moisture and mould. Fast curing. Very good adherence on various building materials, except Teflon, polyethylene and silicone surfaces. High-quality result under various weather conditions. Application with foam gun.

Colour Package 1000 ml aerosol can, content 750 ml, 12 cans in a box

Field of application

Application conditions

■■ Installation and insulation of fire-proof doors ■■ Feedthroughs of pipes and cables.

■■ Air temperature during application +5 °C to +30 °C, best results at +20 °C. ■■ Can temperature during application +10 °C to +25 °C, best results at +20 °C. ■■ Yield considerably depends on working conditions – temperature, air humidity, expansion room. ■■ The surfaces to be insulated must be clean from dust, loose particles and oil. ■■ Cured foam can be painted with water-based paints.

GAP FILLING │ PU foams │ GUN FOAMS PENOSIL PREMIUM FIRE RATED GUNFOAM B1

Technical specification PROPERTY

UNIT

VALUE

Tack free time (TM 1014)

minute

6-10

Cutting time (TM 1005)

minute

<30

Completely cured in joint 3x5 cm (+23 °C)

hour

Density in joint, 3x10cm (WGM106)

kg/m3

17-22

Fire class of cured foam (DIN 4102-1)

Volume decrease

non

Post-expansion (TM 1010)

<50

Flash point of cured foam

°C

Tensile strength (BS 5241)

N/cm

400 2

Compression strength (TM 1011, moistened surfaces) kPa

>40

Thermal conductivity (EN 12667, TM 1020)

W/m·K

0,03

Sound reduction index RST,w

Temperature resistance of cured foam

°C

-50 to +90

The values specified were obtained at 23 °C and 50% relative humidity, unless otherwise specified.

Fire resistance tested according to EN 1366-4 and rated according to EN 13501-2: Fire Resistance Classification

EI 30-V-X-F-W-00 to 40

Joint depth 100 mm and over

EI 45-V-X-F-W-00 to 20

Joint depth 100 mm and over

EI 60-V-X-F-W-00 to 10

Joint depth 100 mm and over

EI 90-V-X-F-W-00 to 60

Joint depth 200 mm and over

EI 120-V-X-F-W-00 to 30

Joint depth 200 mm and over

EI 180-V-X-F-W-00 to 20

Joint depth 200 mm and over

EI 240-V-X-F-W-00 to 10

Joint depth 200 mm and over

This classification is valid for the following end use applications: 1) The foam shall be used as fire resistant joint seal in joints of concrete, block work and masonry vertical separating elements with density of 650 kg/m3 or greater and thickness of 100 mm and over. 2) Linear joints shall have vertical orientation only and shall be filled throughout. Joint seal shall be fitted flush with the surface of the supporting construction and protected with steel sheet, thickness at least 0,5 mm.

Recommendation Foam gun PENOSIL Premium FoamGun P1.

Storage Safety requirements The product is flammable. Protect from overheating and keep away from ignitions sources. Avoid direct sunlight and do not smoke at work. May cause sensitisation by inhalation and skin contact. Ensure sufficient ventilation during application. Wear safety glasses and gloves. Keep out of the reach of children. Cured foam can be handled without any danger to health.

The cans must be stored and transported in vertical position. Store in a cool and dry place at +5 °C to +30 °C. The foam cans must not be stored above +50 °C, in vicinity of heat sources or in direct sun light. Guaranteed storage time in unopened package 12 months.

GAP FILLING │ PU foams │ GUN FOAMS PENOSIL Premium Elastic Gunfoam All Season

One-component high-quality elastic construction foam with especially low expansion pressure. Especially suitable for places of use where the elastic properties and minimum expansion pressure of the construction foam are important – such as joints in wooden and log houses, narrow and pressure sensitive joints, etc. Adhesive and supporting properties are less than those of regular foam. ■■ Elastic, easily compressible, regains original shape

after exertion of pressure is ceased.

■■ Due to especially low expansion pressure very suitable

for using in fragile constructions.

■■ Fast curing. ■■ Allows accurate dosage and economic usage.

■■ Withstands vibration well. ■■ Adheres well to various construction materials.

■■ Quality result at different weather conditions from -10 °C. ■■ Can be used with a foam gun.

Colour Package 1000 ml aerosol can, content 750 ml, 12 cans in a box

Field of application

Application conditions

■■ Installation and sealing of wooden doors and windows. ■■ Filling of pressure sensitive and narrow joints. ■■ Insulation of ventilation devices and pipes. ■■ Filling of joints and openings of considerable movability. ■■ Thermal and sound insulation.

■■ Air temperature during application -10 °C to +30 °C, best results at +20 °C. ■■ Can temperature during application +10 °C to +25 °C, best results at +20 °C. ■■ Yield depends considerably on working conditions – temperature, air humidity, room for expansion. ■■ The surfaces of joints must be free of dust, loose particles and oil.

GAP FILLING │ PU foams │ GUN FOAMS PENOSIL Premium Elastic Gunfoam All Season

Technical specification PROPERTY

UNIT

VALUE

Tack free time

minute

10-14

Cutting time (30 mm foam strip)

minute

30-40

hour

up to 18 up to 24

kg/m3

15-20

Application instruction

Dimensional stability

Post-expansion

up to 40

Flash point of cured foam

°C

400

Elongation at breaking point (KRI001)

up to 40

Compression strength at 10% deformation

N/cm2

1,5

Thermal conductivity coefficient

W/m·K

0,034

Sound reduction index RST,w

Hold the foam canister in an upright position, turn the gun to the canister by holding the gun handle with one hand, and turn the canister with the other hand. Make sure that the gun is not pointed to other persons when turning it. The canister must not be screwed to the gun with the valve upside down or by turning the gun on the canister. After fixing the gun, shake the canister well at least 20 times and turn into working position. The foam output can be adjusted using the gun trigger. A previously moistened surface ensures faster curing of the foam and a better result. At low temperatures the foam canister must be warmed before work in a warm room or water. The temperature of the room or water must not exceed 30 °C.

°C

-50 to +90 -65 to +110

Cleaning

Completely cured in joint

+23 °C +5 °C

Density Fire class of cured foam (DIN 4102-1)

Temperature resistance of cured foam

long term short term

The values specified were obtained at +23 °C and 50% relative humidity, unless otherwise specified.

■■ Uncured foam can be cleaned with PENOSIL Premium Foam Cleaner ■■ Cured foam can be removed with PENOSIL Premium Foam Remover ■■ Hands, clothes and foam gun can be cleaned from uncured foam with moistened PENOSIL Premium Cleaning Wipes.

Recommendation Foam gun PENOSIL Premium FoamGun P1.

Safety requirements The product is flammable. Protect from overheating and keep away from ignition sources. Avoid direct sunlight and do not smoke when working with the product. May cause sensitisation by inhalation and skin contact. Ensure sufficient ventilation during application. Wear safety glasses and gloves. Keep out of the reach of children. Cured construction foam can be handled without any danger to health.

Storage The cans must be stored and transported in vertical position. Store in a cool and dry place at +5 °C to +30 °C. The aerosol cans must not be stored above +50 °C, in vicinity of heat sources or in direct sun light. Guaranteed storage time in unopened package 12 months.

GAP FILLING │ PU foams │ GUN FOAMS PENOSIL STANDARD GUNFOAM ALL SEASON

All season construction foam with a good price and quality ratio. Good filling properties. ■■ Good foam for interior and exterior works under normal conditions. ■■ Good adherence on various building materials. ■■ Application with foam gun. ■■

Colour Package 1000 ml aerosol can, content 630 ml, 12 cans in a box

Field of application

Application conditions

■■ Installation and insulation of building elements. ■■ Filling of holes and gaps, insulation of joints. ■■ Insulation and fixation of pipes. ■■ Thermo and sound insulation.

■■ Air temperature during application -5 °C to +30 °C, best results at +20 °C. ■■ Can temperature during application +10 °C to +25 °C, best results at +20 °C. ■■ Yield considerably depends on working conditions – temperature, air humidity, expansion room. ■■ The surfaces must be clean from dust, loose particles and oil. ■■ Cured foam can be painted with water-based paints.

GAP FILLING │ PU foams │ GUN FOAMS PENOSIL STANDARD GUNFOAM ALL SEASON

Technical specification PROPERTY

UNIT

VALUE

Tack free time

minute

12-16

Cutting time (30 mm bead)

minute

30-35

hour

up to 12 up to 24

kg/m3

25-30

Completely cured in joint

+23 °C +5 °C

Density Fire class of cured foam (DIN 4102-1)

Volume decrease

non

Post-expansion

up to 40

Flash point of cured foam

°C

400

Tensile strength (BS 5241)

N/cm2

Compression strength at 10% deformation (DIN 53421)

N/cm

Thermal conductivity

W/m·K

0,034

°C

-50 to +90 -65 to +110

Temperature resistance of cured foam

long term short term

Recommendation Foam gun PENOSIL Premium FoamGun S1.

The values specified were obtained at 23 °C and 50% relative humidity, unless otherwise specified.

GAP FILLING │ PU foams │ GUN FOAMS PENOSIL STANDARD GUNFOAM and STANDARD GUNFOAM WINTER

Construction foam with a good price and quality ratio.

Good filling properties. ■■ Good foam for interior and exterior works under normal conditions. ■■ Good adherence on various building materials. ■■ Application with foam gun. ■■

+5...+30 °C Foam

-5...+30 °C Foam Winter

Colour Package 1000 ml aerosol can, content 630 ml, 12 cans in a box

Field of application

Application conditions

■■ Installation and insulation of building elements. ■■ Filling of holes and gaps, insulation of joints. ■■ Insulation and fixation of pipes in openings. ■■ Thermo and sound insulation.

■■ Air temperature during application +5 °C to +30 °C, winter foam -5 °C to +30 °C, best results at +20 °C. ■■ Can temperature during application +10 °C to +25 °C, best results at +20 °C. ■■ Yield considerably depends on working conditions – temperature, air humidity, expansion room. ■■ The surfaces must be clean from dust, loose particles and oil. ■■ Cured foam can be painted with water-based paints.

GAP FILLING │ PU foams │ GUN FOAMS PENOSIL STANDARD GUNFOAM and STANDARD GUNFOAM WINTER

Technical specification PROPERTY

UNIT

VALUE

Tack free time

minute

12-16

Cutting time (30 mm bead)

minute

30-40

hour

up to 12 up to 24

Completely cured in joint

+23 °C +5 °C Standard Gunfoam -5 °C Standard Gunfoam Winter

Density

up to 32 kg/m3

25-30 B3

Fire class of cured foam (DIN 4102-1) Volume decrease

up to 2

Post-expansion

up to 50

Flash point of cured foam

°C

400

Tensile strength (BS 5241)

N/cm2

Compression strength at 10% deformation (DIN 53421)

N/cm2

Thermal conductivity

W/m·K

0,034

°C

-50 to +90 -65 to +110

Temperature resistance of cured foam

long term: short term:

Cleaning ■■ Uncured foam can be cleaned with PENOSIL Premium Foam Cleaner ■■ Cured foam can be removed with PENOSIL Premium Foam Remover ■■ Hands, clothes and foam gun can be cleaned from uncured foam with moistened PENOSIL Premium Cleaning Wipes.

The values specified were obtained at +23 °C and 50% relative humidity, unless otherwise specified.

Recommendation Foam gun PENOSIL FoamGun S1.

Storage The cans must be stored and transported in vertical position. Store in a cool and dry place. Store at +5 °C to +30 °C. The foam cans must not be stored above +50 °C, in vicinity of heat sources or in direct sun light. Guaranteed storage time in unopened package 18 months.

GAP FILLING │ PU FOAMS │ EASYGUN PENOSIL EASYGUN FOAM ALL SEASON

Construction foam with a high-quality structure and innovative patented applicator ensuring high-quality result even without a foam gun.

■■ ■■ ■■ ■■ ■■

Application comfort is ensured both with a gun and the delivered applicator. A unique patented applicator allows achieving gunfoam quality even without using a gun. Generous foam output, accurate dosage and economic usage. Even structure and low post-expansion. Adjusting of dosing speed with applicator is easy and comfortable.

Colour Package 1000 ml aerosol can, content 750 ml, 12 cans in a box

Field of application

Application conditions

■■ Installation and insulation of doors and windows. ■■ Fixation of wall panels, insulation boards, roof tiles. ■■ Filling of holes and gaps, insulation of joints. ■■ Thermo and sound insulation.

■■ Air temperature during application -10 °C to +30 °C, best results at +23 °C. ■■ Can temperature during application +10 °C to +25 °C, best results at +20 °C. ■■ Yield considerably depends on working conditions – temperature, air humidity, expansion room. ■■ The surfaces must be clean from dust, loose particles and oil. ■■ Cured foam can be painted with water-based paints.

GAP FILLING │ PU FOAMS │ EASYGUN PENOSIL EASYGUN FOAM ALL SEASON

Technical specification PROPERTY

UNIT

VALUE

Tack free time

minute

10-12

Cutting time (30 mm bead)

minute

30-40

hour

up to 12 up to 24

kg/m3

20-25

Completely cured in joint

+23 °C +5 °C

Density Fire class of cured foam (DIN 4102-1)

Volume decrease

non

Post-expansion

times

up to 2

Flash point of cured foam

°C

400

Tensile strength (BS 5241)

N/cm2

Compression strength at 10% deformation (DIN 53421)

N/cm

Thermal conductivity

W/m·K

0,034

Temperature resistance of cured foam

long term short term

Output

-50 to +90 -65 to +110

Application instruction Application with EasyGun applicator: Hold the foam can in upright position. Place the EasyGun applicator to can valve, press slightly until the applicator is fixed, then shake the can well at least 20 times. For application, turn the can adapter upside down and press the EasyGun applicator with fingers. Application with foam gun: Hold the foam can in upright position and turn the gun side by holding the gun handle with one hand and turn the can with the other hand. Make sure that the gun is not pointed to other persons when turning it. The can must not be screwed to the gun with the valve upside down or by turning the gun on the can. After fixing the gun, shake the can well at least 20 times and turn into application position. The foam output can be adjusted by gun trigger. A moistened substrate ensures faster curing and better result.

approx. 40-45

The values specified were obtained at +23 °C and 50% relative humidity and using EasyGun applicator, unless otherwise specified.

Recommendation Foam gun PENOSIL Premium FoamGun P1.

SAFETY REQUIREMENTS The product is flammable. Protect from overheating and keep away from ignitions sources. Avoid direct sunlight and do not smoke at work. May cause sensitisation by inhalation and skin contact. Ensure sufficient ventilation during application. Wear safety glasses and gloves. Keep out of the reach of children. Cured foam can be handled without any danger to health.

GAP FILLING │ PU FOAMS │ STRAW FOAMS PENOSIL PREMIUM FOAM and PREMIUM FOAM WINTER

High quality construction foam with a convenient straw applicator for demanding users. ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■

Even structure. Good filling properties. Good adherence on various building materials. High-quality result under various weather conditions. Usable with the delivered straw applicator. Easy to use. The new and narrower straw ensures better foam structure and higher output. The new trigger is suitable for temporary air-tight sealing of the straw during work pauses.

+5...+30 °C Foam

-10...+30 °C Foam Winter

Colour Package ■■1000 ml aerosol can, content 750 ml, 12 cans in a box ■■650 ml aerosol can, content 500 ml, 12 cans in a box ■■520 ml aerosol can, content 340 ml, 12 cans in a box

Field of application

Application conditions

■■ Filling of holes and gaps, insulation of joints. ■■ Installation and insulation of building elements. ■■ Insulation and fixation of pipes in feedthroughs. ■■ Thermo and sound insulation.

■■ Air temperature during application +5 °C to +30 °C, winter foam -10 °C to +30 °C, best results at +20 °C. ■■ Can temperature during application +10 °C to +25 °C, winter foam +5 °C to +30 °C, best results at +20 °C. ■■ Yield considerably depends on working conditions temperature, air humidity, expansion room. ■■ The surfaces must be clean from dust, loose particles and oil. ■■ Cured foam can be painted with water-based paints.

GAP FILLING │ PU FOAMS │ STRAW FOAMS PENOSIL PREMIUM FOAM and PREMIUM FOAM WINTER

Technical specification PROPERTY

UNIT

VALUE

Tack free time

Foam Foam Winter

minute

12-16 10-14

Cutting time

Foam Foam Winter

minute

30-40 30-35

Completely cured in joint

+23 °C Foam +23 °C Foam Winter +5 °C Foam -5 °C Foam Winter

hour

up to 18 up to 12 up to 24 up to 24

kg/m3

25-30

Density Fire class of cured foam (DIN 4102-1)

Volume decrease

up to 2

Post-expansion

times

2-2,5

Flash point of cured foam

°C

400

N/cm2

12 15

Compression strength at 10% deformation (DIN 53421)

N/cm2

Thermal conductivity

W/m·K

0,036

°C

-50 to +90 -65 to +110

Tensile strength (BS 5241)

Temperature resistance of cured foam

Foam Foam Winter

long term short term

Application instruction Hold the foam can in upright position. Screw the applicator (straw) to the foam can valve. Shake the can at least 20 times before use. For application, turn the applicator upside down and press the applicator trigger. The foam output can be adjusted by applicator trigger. A moistened substrate ensures faster curing and better result.

The values specified were obtained at 23 °C and 50% relative humidity, unless otherwise specified.

GAP FILLING │ PU FOAMS │ STRAW FOAMS PENOSIL PREMIUM FIRE RATED FOAM B1

High-quality and comfortable fire insulation foam with straw applicator. Fire resistance is tested according to European standard EN 1366-4 and reaction to fire according to standard DIN 4102-1. Fire resistance is rated in accordance with EN 13501-2. ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■

Certified construction foam with high fire resistance. Even structure. Good filling properties. Excellent temperature and sound insulation. Good adherence on various building materials. Usable with the delivered straw applicator. Easy to use. The new and narrower straw ensures better foam structure and higher output. The new trigger is suitable for temporary air-tight sealing of the straw during work pauses.

Colour Package 1000 ml aerosol can, content 750 ml, 12 cans in a box

Field of application

Application conditions

■■ Installation and insulation of fire-proof doors. ■■ Sealing of joints in fire rated walls. ■■ Filling and sealing works in places which have heightened requirements concerning building materials reaction to fire properties. ■■ Feedthroughs of pipes and cables.

■■ Air temperature during application +5 °C to +30 °C, best results at +20 °C. ■■ Can temperature during application +10 °C to +25 °C, best results at +20 °C. ■■ Yield considerably depends on working conditions – temperature, air humidity, expansion room. ■■ The surfaces must be clean from dust, loose particles and oil. ■■ Cured foam can be painted with water-based paints.

GAP FILLING │ PU FOAMS │ STRAW FOAMS PENOSIL PREMIUM FIRE RATED FOAM B1

Technical specification PROPERTY

UNIT

VALUE

Tack free time (TM 1014)

minute

8-12

Cutting time e (TM 1005)

minute

<45

Completely cured in joint 3x5 cm (+23 °C)

hour

<16

Density in joint, 3x10 cm (WGM106)

kg/m3

23-27

Fire class of cured foam (DIN 4102-1)

Curing pressure (TM 1009, moistened surfaces)

kPa

<4,5

Post-expansion (TM 1010)

<150

Flash point of cured foam

°C

400

Tensile strength (TM 1018, moistened surfaces)

kPa

>130

Compression strength (TM 1011, moistened surfaces) kPa

>50

Thermal conductivity (EN 12667, TM 1020)

W/m·K

0,033

Temperature resistance of cured foam

°C

-50 to +90

The values specified were obtained at +23 °C and 50% relative humidity, unless otherwise specified.

Fire resistance is tested in accordance with European standard EN 1366-4 and reaction to fire in accordance with DIN 4102-1. Fire Resistance Classification

EI 30-V-X-F-W-00 to 40

Joint depth 100 mm and over

EI 45-V-X-F-W-00 to 20

Joint depth 100 mm and over

EI 60-V-X-F-W-00 to 10

Joint depth 100 mm and over

EI 90-V-X-F-W-00 to 60

Joint depth 200 mm and over

EI 120-V-X-F-W-00 to 30

Joint depth 200 mm and over

EI 180-V-X-F-W-00 to 20

Joint depth 200 mm and over

EI 240-V-X-F-W-00 to 10

Joint depth 200 mm and over

GAP FILLING │ PU FOAMS │ STRAW FOAMS PENOSIL STANDARD FOAM and STANDARD FOAM WINTER

Construction foam with a good price and quality ratio and a convenient straw applicator.

■■ ■■ ■■ ■■ ■■ ■■ ■■

Good filling properties. Good foam for interior and exterior works under normal conditions. Good adherence on various building materials. Usable with the delivered straw applicator. Easy to use. The new and narrower straw ensures better foam structure and higher output. The new trigger is suitable for temporary air-tight sealing of the straw during work pauses.

+5...+30 °C Foam

-5...+30 °C Foam Winter

Colour Package ■■1000 ml aerosol can, content 750 ml, 12 cans in a box

Field of application

Application conditions

■■ Filling of holes and gaps, insulation of joints ■■ Installation and insulation of construction structures ■■ Insulation and fixation of pipes ■■ Thermo and sound insulation

■■ Air temperature during application -5 °C to +30 °C, winter foam -5 °C to +30 °C, best results at +20 °C. ■■ Can temperature during application +10 °C to +25 °C, best results at +20 °C. ■■ Yield considerably depends on working conditions – temperature, air humidity, expansion room. ■■ The surfaces must be clean from dust, loose particles and oil. ■■ Cured foam can be painted with water-based paints.

GAP FILLING │ PU FOAMS │ STRAW FOAMS PENOSIL STANDARD FOAM and STANDARD FOAM WINTER

Technical specification PROPERTY

UNIT

VALUE

Tack free time

minute

12-16

Cutting time (30 mm bead)

minute

30-40

hour

up to 18 up to 24

kg/m3

25-30

Completely cured in joint

+23 °C +5 °C

Density Fire class of cured foam (DIN 4102-1)

Hold the foam can in upright position. Screw the applicator (straw) to the foam can valve. Shake the can at least 20 times before use. For application, turn the applicator upside down and press the applicator trigger. The foam output can be adjusted by applicator trigger. A moistened substrate ensures faster curing and better result.

Cleaning

Volume decrease

up to 2

Post-expansion

times

2-2,5

Flash point of cured foam

°C

400

N/cm2

11 12

Compression strength at 10% deformation (DIN 53421)

N/cm2

Thermal conductivity

W/m·K

0,036

°C

-50 to +90 -65 to +110

Tensile strength (BS 5241)

Temperature resistance of cured foam

Foam Foam Winter

long term: short term:

Application instruction

The values specified were obtained at +23 °C and 50% relative humidity, unless otherwise specified.

Storage The cans must be stored and transported in vertical position. Store in a cool and dry place. Store at +5 °C to +30 °C. Guaranteed storage time in closed package 18 months. The foam cans must not be stored above +50 °C, in vicinity of heat sources or in direct sun light. Guaranteed storage time in unopened package 12 months.

GAP FILLING │ PU FOAMS │ STRAW FOAMS PENOSIL STANDARD FOAM ALL SEASON

All season construction foam with a good price and quality ratio and a convenient straw applicator. ■■ ■■ ■■ ■■ ■■ ■■ ■■

Colour Package 1000 ml aerosol can, content 640 ml, 12 cans in a box

Field of application

Application conditions

■■ Filling of holes and gaps, insulation of joints. ■■ Installation and insulation of construction structures. ■■ Insulation and fixation of pipes. ■■ Thermo and sound insulation.

GAP FILLING │ PU FOAMS │ STRAW FOAMS PENOSIL STANDARD FOAM ALL SEASON

Technical specification PROPERTY

UNIT

VALUE

Tack free time

minute

12-16

Cutting time

minute

30-40

hour

up to 18 up to 24

kg/m3

25-30

Completely cured in joint

+23 °C +5 °C

Density Fire class of cured foam (DIN 4102-1)

Volume decrease

times

up to 2

Post-expansion

2-2,5

Flash point of cured foam

°C

400

Tensile strength (BS 5241)

N/cm2

Compression strength at 10% deformation (DIN 53421)

N/cm2

Thermal conductivity

W/m·K

0,036

°C

-50 to +90 -65 to +110

Temperature resistance of cured foam

long term short term

The values specified were obtained at 23 °C and 50% relative humidity, unless otherwise specified.

GAP FILLING │ SEALANTS │ SILICONES PENOSIL GENERAL SILICONE

Innovative neutral sealant combining the properties of silicone and adhesive.

■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■

Multi-purpose silicone, usable as substitute for many silicones. Good adhesive properties. Excellent processing and smoothing properties. Suitable for slightly alkaline or acidic surfaces. Does not cause colour changes on marble or other natural stones. Does not cause corrosion on metal. After curing very good temperature resistance (between -60 °C and +180 °C). Does not lose volume during the curing process. Permanent elasticity. Mould, UV, moisture and weather resistant.

Colour Package ■■310 ml cartridge, 12 cartridges in box. ■■600 ml foil package, 12 packages in box

Sealant for facade for interior and exterior application. EN 15651-1:2012: Type F-EXT-INT: CLASS 12,5P (transparent) EN 15651-1:2012: Type F-EXT-INT: CLASS 7,5P (colours) Sealant used for sanitary applications. EN 15651-3:2012: Type S: CLASS S2

Field of application ■■ General construction and repair works. ■■ Interior and exterior works, wet and dry rooms. ■■ All finishing, insulation and ventilation works. ■■ Insulation and sealing during roof and facade works. ■■ Installation of mirrors, ornaments, bands, etc.

Application conditions ■■ Usage temperature between +5 °C and +45 °C. ■■ The application temperature of the sealant must be +20 °C - +25 °C.

■■ The application at temperatures lower than +5 °C, can only be carried out when connected surfaces are free of condensation, snow and ice. ■■ The surfaces must be clean from dust, loose particles and oil.

Usage restrictions ■■ Do not use for sealing aquariums and underwater joints. ■■ Do not use as adhesive during facade works. ■■ Cannot be painted.

GAP FILLING │ SEALANTS │ SILICONES PENOSIL GENERAL SILICONE

Technical specification PROPERTY

UNIT

VALUE

Skin forming time

minute

16-20

Curing

mm/24 h 2-3

Curing system Density (DIN 53 479-B)

moisture curing colourless coloured

g/cm³

1,01 1,21

Properties of cured sealant Movement of the joint (ISO 11 600)

colourless coloured

Change in volume, ISO10563

% %

Hardness (Shore A)

± 12,5 ± 7,5 6,5±0,5 34-36 -60 ... +180

Temperature resistance

˚C

for short periods up to +200

The parameters indicated have been measured at +23 °C and 50% relative air humidity.

Recommendation For a 310 ml cartridge, we recommend using the PENOSIL Sealant Manual Gun 310 ml For a 600 ml foil package, we recommend using the PENOSIL Sealant Manual Gun 600 ml or PENOSIL Sealant Pneumatic Gun 300-600 ml.

Application instruction The surfaces must be clean from fat, oil, dust and loose particles. The surface to be covered must be dry. Ensure adequate ventilation in all joint locations. During the curing process, make sure that no impurities can settle on the surface and that the joint surface is not affected by mechanical load. Do not use at temperatures below +5 °C. 310 ml cartridge: Cut off the threaded end of the cartridge and screw on the application nozzle for directing silicone. Cut the threaded end in a way where a suitable opening for application is produced. Place the cartridge together with the applicator in the silicone gun and fill the installation nozzle with silicone, by repeatedly pressing the gun trigger. Fill the joint by evenly pressing on gun trigger and dragging the nozzle along the joint. After application of silicone, smoothen the upper surface by a rubber silicone scraper, by removing the excess material. 600 ml foil package: Open the application nozzle of the gun, insert the package in the gun and open on the applicator side by removing the fastening clamp. Place the applicator nozzle on the opened end and screw on the cap. Apply silicone in the joint by repeatedly and evenly pressing on gun trigger and smoothly dragging the nozzle along the joint. After application, smooth the silicone surface with a rubber silicone scraper and remove excess material.

Cleaning ■■ Uncured sealant, tools and hands can be cleaned with PENOSIL Premium Cleaning Wipes. ■■ Cured sealant can be removed mechanically by using PENOSIL Premium Silicone Remover for softening the sealant.

SAFETY REQUIREMENTS Ensure sufficient ventilation during application. Keep out of the reach of children. Avoid contact with skin and eyes. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Cured sealant can be handled without any danger to health.

Storage Guaranteed storage time 12 months starting from the date of manufacture if stored in a closed original package in a dry place between +5 °C and +25 °C.

GAP FILLING │ SEALANTS │ SILICONES PENOSIL Premium Building Silicone

Neutral general purpose silicone sealant with a low elastic modulus and excellent adhesive properties. Bonds perfectly with common construction materials, such as concrete, wood, ceramic brick, aluminium, PVC, glass, ceramics and various plastics. ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■

Suitable for filling and sealing both indoors and outdoors. High movement (±25%) and low elastic modulus. Easy to process and smooth. Good adhesion with many porous and non-porous surfaces. Does not cause corrosion on metals. Suitable for sealing surfaces that come into contact with food. Resistant to UV radiation, various weather condition and ageing. Virtually no shrinkage during the curing process. Permanently elastic.

Colour Plastic cartridge:

Foil package:

Package ■■310 ml plastic cartridge, 12 pcs per box. ■■600 ml foil package, 20 pcs per box.

Sealant for facade for interior and exterior application, suitable for use in cold climate. EN 15651-1:2012: Type F-INT-EXT-CC: CLASS 25LM Sealant used for sealing glazing applications, suitable for use in cold climate EN 15651-2:2012: Type G-CC: CLASS 25LM Sealant used for sanitary joints EN 15651-3:2012: Type S CLASS XS1 Classified as a material intended to come into contact with food. EN 1186, Regulation (EU) 10/2011

Fields of application

Application conditions

■■ Filling and sealing joints indoors and outdoors. ■■ Sealing high movement joints, e.g. façade joints. ■■ Filling and weatherproofing seams between window and door frames. ■■ All finishing, sealing, glasswork, sanitation and ventilation work.

■■ Application temperature range: from +5 °C to +40 °C. ■■ Sealant temperature during application must be between +20 °C and +25 °C. ■■ Surfaces must be free from dust, loose particles and oil. ■■ Non-porous surfaces must be cleaned with solvent and a clean, lint-free cotton cloth. Remove solvent residue with a dry, clean cloth before it evaporates.

GAP FILLING │ SEALANTS │ SILICONES PENOSIL Premium Building Silicone usage restrictions ■■ Not suitable for surfaces containing bitumen or on construction materials that may emit oils, plasticisers or solvents (e.g. natural or synthetic rubber, chloroprene, EPDM rubber, etc.) ■■ Not recommended for natural stone, e.g. marble and granite. ■■ Do not use for filling joints in aquariums and other underwater structures. ■■ Does not adhere to polyethylene (PE), polypropylene (PP), PTFE (Teflon®) or Plexiglas (PMMA). ■■ Not suitable for use as structural glazing glue. ■■ Not paintable.

Technical specification Properties

Unit

Value

Skin-forming time

minutė

5-10

Curing rate

mm/24 val.

Curing system Density (DIN 53 479-B)

vulcanisation through moisture in air g/cm³

1,0

Movement (ISO 11600)

± 25

Elastic recovery (ISO 7389)

>85

Shrinkage

<10

Properties of cured sealant

Hardness (shore A) (ISO 868)

Elongation at break 12x12x50 mm joint (ISO 8339)

˃250

Tensile strength 12x12x50 mm joint (ISO 8339)

N/mm2

0,35

Elastic modulus at 100% elongation N/mm2 12x12x50 mm joint (ISO 8339)

0,25

Temperature resistance

between -40 and +150

°C

The above parameters have been measured under the following conditions: temperature 23 °C and 50% relative humidity.

Recommendation For a 310 ml cartridge: PENOSIL Sealant Manual Gun 310 ml. For a 600 ml foil package: PENOSIL Sealant Manual Gun 600 ml or PENOSIL Sealant Pneumatic Gun 300-600 ml.

Application instructions The surfaces to be bonded must be free of grease, oil, dust and loose particles. The surface to be covered must be dry. Ensure sufficient ventilation in all jointed locations. During curing, make sure no dirt falls on the material’s surface and that the surface of the joint is not under mechanical stress. Do not use at temperatures below +5 °C. Due to the abundance of materials, we recommend testing the suitability and adhesion of the product before use. If necessary, use a primer to improve adhesion. 310 ml plastic cartridge: Cut off the threaded end of the cartridge and screw on the application nozzle for directing the silicone. Cut the nozzle so that the hole is sufficient for application of the necessary amount of adhesive. Place the cartridge together with the nozzle in the gun and fill the application nozzle with silicone by repeatedly pressing the gun’s trigger. Apply the silicone to the joint by pressing the gun’s trigger repeatedly and evenly and by dragging the nozzle steadily across the joint. After application, smooth the silicone with a rubber smoothing tool. Remove excess material. 600 ml foil package: open the gun’s dispenser nozzle, place the package in the gun and open its dispenser side end by removing the bracket. Place the dispenser nozzle on the open end and screw on the cap. Apply the silicone to the joint by pressing the gun’s trigger repeatedly and evenly and by dragging the nozzle steadily across the joint. After application, smooth the surface of the silicone with a rubber smoothing tool and remove any excess sealant.

Cleaning

Clean uncured sealant using PENOSIL Premium Cleaning Wipes. Remove cured sealant mechanically using PENOSIL Premium Silicone Remover to soften the sealant.

Storage

Safety requirements Sufficient ventilation must be provided during use of the product. Keep out of the reach of children. Avoid contact with skin and eyes. If the product gets into your eyes, rinse them with water immediately and see a doctor. Cured silicone sealant does not pose a health hazard.

Guaranteed storage time is 12 months from the manufacturing date, provided the product is stored in the original hermetically sealed package in a dry place and at temperatures between +5 °C and +30 °C.

GAP FILLING │ SEALANTS │ SILICONES PENOSIL Premium Neutral Silicone

Neutral-curing silicone sealant with good processing properties, great adherence and a wide application area. ■■ ■■ ■■ ■■

■■ ■■ ■■ ■■ ■■ ■■ ■■

Insulates and seals in both indoor and outdoor conditions. Suitable for slightly alkaline metal surfaces. Non-sagging, does not spread in the joint. Adheres to most building materials such as stone, metal and wood materials, glass and plastic surfaces. Adheres well to porous surfaces. Excellent processing and smoothing properties. Allows long working periods. After curing, elastic even at extreme temperatures (-40 °C to +100 °C). Mould, UV, moisture and weather resistant. Long storage time. Does not lose volume during the curing process.

Colour Package ■■310 ml cartridge, 12 cartridges in box. ■■600 ml foil package, 12 packages in box

Sealant for facade for interior and exterior application. EN 15651-1:2012: Type F-INT-EXT: CLASS 12,5E Sealant used for sanitary applications. EN 15651-3:2012: Type S: CLASS S3 (transparent) EN 15651-3:2012: Type S: CLASS XS3 (colours)

Field of application

Application conditions

■■ Insulation and sealing of connections, also on surfaces where acid-curing silicone cannot be used. ■■ General construction and repair works ■■ Interior and exterior works, wet and dry rooms ■■ All finishing, insulation, glassing and ventilation works ■■ Insulation and sealing of window and door frames.

■■ Usage temperature between +5 °C and +40 °C. ■■ The surfaces must be clean from dust, loose particles and oil.

GAP FILLING │ SEALANTS │ SILICONES PENOSIL Premium Neutral Silicone

Usage restrictions ■■ Do not use for sealing aquariums and underwater joints. ■■ Cannot be painted.

Technical specification PROPERTY

UNIT

VALUE

Skin forming time

minute

13-15

Curing

mm/24 h 2,5-3 vulcanizing due to air humidity

Curing system Density (DIN 53 479-B)

colourless

g/cm³

0,99

coloured

1,26

colourless

25±2

coloured

35±2

Properties of cured sealant Hardness (Shore A) (ISO 868) Temperature resistance

˚C

-40 to +100

The parameters indicated have been measured at +23 °C and 50% relative air humidity.

Recommendation For a 310 ml cartridge, we recommend using the PENOSIL Sealant Manual Gun 310 ml For a 600 ml foil package, we recommend using the PENOSIL Sealant Manual Gun 600 ml

or PENOSIL Sealant Pneumatic Gun 300-600 ml.

Storage Guaranteed storage time 18 months starting from the date of manufacture if stored in a closed original package in a dry place between +5 °C and +25 °C.

GAP FILLING │ SEALANTS │ SILICONES PENOSIL Premium Universal Silicone

All-purpose acid-curing silicone sealant with good processing properties and excellent adherence.

■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■

Insulates and seals. Non-sagging, does not spread in the joint. Excellent processing and smoothing properties. Allows long working periods. Adheres well to metal, glass, glazed surfaces, ceramic tiles, many plastics, and most paints. Elastic. UV and weather proof. Does not lose volume during the curing process.

Colour Package ■■310 ml cartridge, 12 cartridges in box. ■■600 ml foil package, 12 packages in box

Field of application

Application conditions

■■ Insulation and sealing of connections in indoor and outdoor works. ■■ General construction and repair works. ■■ Moist and dry rooms. ■■ All finishing, insulation and ventilation works. ■■ Insulation of window and door frames and light box displays.

■■ Usage temperature between +5 °C and +40 °C. ■■ The surfaces must be clean from dust, loose particles and oil. ■■ Non-porous surfaces should be cleaned with solvent and a clean, non-fluffy cotton cloth. Solvent rests should be removed before evaporating with a clean cloth.

GAP FILLING │ SEALANTS │ SILICONES PENOSIL Premium Universal Silicone

Usage restrictions ■■ Do not use in contact with natural stones such as marble and granite. ■■ Do not use in contact with fibre cement, plaster or mortar. ■■ Do not use in contact with metals such as lead, copper, brass and zinc. ■■ Do not use in contact with pre-strained polyacrylate or polycarbonate parts as they might be cracked. ■■ Do not use for sealing aquariums and underwater joints. ■■ Does not adhere to polycarbonates (layered and corrugated plastics) or Plexiglas (PMMA). ■■ Cannot be painted.

Technical specification PROPERTY

UNIT

VALUE

Skin forming time

minute

10-12

Curing

mm/24 h 2-3 vulcanizing due to air humidity

Curing system Density (DIN 53 479-B)

colourless

g/cm³

0,96

coloured

1,08

colourless

20±2

coloured

26-30±2

Properties of cured sealant Hardness (Shore A) (ISO 868) Temperature resistance

˚C

-40 to +100

The parameters indicated have been measured at +23 °C and 50% relative air humidity.

Recommendation For a 310 ml cartridge, we recommend using the PENOSIL Sealant Manual Gun 310 ml

Application instruction The surfaces must be clean from fat, oil, dust and loose particles. The surface to be covered must be dry. Ensure adequate ventilation in all joint locations. During the curing process, make sure that no impurities can settle on the surface and that the joint surface is not affected by mechanical load. Do not use at temperatures below +5 °C. 310 ml cartridge: Cut off the threaded end of the cartridge and screw on the application nozzle for directing silicone. Cut the threaded end under an angle of 45° in a way where a suitable opening for application is produced. Place the cartridge together with the applicator in the gun and fill the installation nozzle with silicone, by repeatedly pressing the gun trigger. Apply silicone in the joint by repeatedly and evenly pressing on gun trigger and smoothly dragging the nozzle continuously along the joint. After applying the silicone, smoothen it with a rubber silicone scraper. Remove excess material. 600 ml foil package: Open the application nozzle of the gun, insert the package in the gun and open on the applicator side by removing the fastening clamp. Place the applicator nozzle on the opened end and screw on the cap. Apply silicone in the joint by repeatedly and evenly pressing on gun trigger and smoothly dragging the nozzle along the joint. After application, smooth the silicone surface with a rubber silicone scraper and remove excess sealant.

For a 600 ml foil package, we recommend using the PENOSIL Sealant Manual Gun 600 ml or PENOSIL Sealant Pneumatic Gun 300-600 ml.

Storage Guaranteed storage time 18 months starting from the date of manufacture if stored in a closed original package in a dry place between +5 °C and +25 °C.

GAP FILLING │ SEALANTS │ SILICONES PENOSIL Premium Sanitary Silicone

Acid-curing mould-resistant silicone sealant for insulation and sealing works in sanitary rooms.

■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■

Excellent processing and smoothing properties. Contains fungicides. Mould, UV, moisture and weather resistant. Allows long working periods. Non-sagging, does not spread in the joint. Adheres well to glass, glazed surfaces, ceramic tiles, many plastics, metals, and most paints. Elastic. Long storage time. Does not lose volume during the curing process.

Colour Package ■■310 ml cartridge, 12 cartridges in box. ■■600 ml foil package, 12 packages in box

Sealant for facade for interior application. EN 15651-1:2012: Type F-INT: CLASS 12,5E (transparent) EN 15651-1:2012: Type F-INT: CLASS 12,5P (colours) Sealant used for sanitary applications. EN 15651-3:2012: Type S: CLASS S1 (transparent) EN 15651-3:2012: Type S: CLASS S2 (colours)

Field of application

Application conditions

■■ Insulation and sealing of connections during indoor works. ■■ Insulation and sealing of washbasin, bath, shower, swimming pool connections. ■■ Insulation of water supply, drainage and PVC-pipes.

GAP FILLING │ SEALANTS │ SILICONES PENOSIL Premium Sanitary Silicone

Usage restrictions ■■ Do not use in contact with natural stones such as marble, granite, fibre cement and mortar. ■■ Do not use in contact with metals such as lead, copper, brass and zinc. ■■ Do not use in contact with pre-strained polyacrylate or polycarbonate parts as they might be cracked. ■■ Do not use for sealing aquariums and underwater joints. ■■ Does not adhere to polycarbonates (layered and corrugated plastics) or Plexiglas (PMMA). ■■ Cannot be painted.

Technical specification PROPERTY

UNIT

VALUE

Skin forming time

minute

10-12

Curing

mm/24 h 2-3 vulcanizing due to air humidity

Curing system Density (DIN 53 479-B)

colourless

g/cm³

0,96

coloured

1,08

colourless

20±2

coloured

26–30±2

Properties of cured sealant Hardness (Shore A) (ISO 868) Temperature resistance

˚C

-40 to +100

The parameters indicated have been measured at +23 °C and 50% relative air humidity.

Recommendation For a 310 ml cartridge, we recommend using the PENOSIL Sealant Manual Gun 310 ml

For a 600 ml foil package, we recommend using the PENOSIL Sealant Manual Gun 600 ml or PENOSIL Sealant Pneumatic Gun 300-600 ml.

Storage Guaranteed storage time 18 months starting from the date of manufacture if stored in a closed original package in a dry place between +5 °C and +25 °C.

GAP FILLING │ SEALANTS │ SILICONES PENOSIL Premium Neutral Sanitary Silicone

Neutral-curing silicone sealant with good adherence properties and a long storage time for insulation and sealing in sanitary rooms. ■■ ■■ ■■ ■■ ■■

■■ ■■ ■■

■■ ■■

Mould, UV, and moisture resistant. Non-sagging, does not spread in the joint. After curing, elastic even at extreme temperatures (-40 °C to +100 °C). Low odour level. Adheres to most building materials such as stone, metal and wood materials, glass and plastic surfaces. Adheres well to porous surfaces. Excellent processing and smoothing properties. Suitable for use on metallic surfaces and alkaline materials such as concrete, mortar and asbestos cement. Long storage time. Does not lose volume during the curing process.

Colour Package ■■310 ml cartridge, 12 cartridges in box. ■■140 ml cartridge, 12 cartridges in box.

Field of application

Application conditions

■■ Insulation and sealing of connections during indoor works. ■■ Insulation and sealing of washbasin, bath, shower, swimming pool joints. ■■ Insulation of water supply, drainage and PVC-pipes. ■■ Glazing works.

GAP FILLING │ SEALANTS │ SILICONES PENOSIL Premium Neutral Sanitary Silicone

Usage restrictions ■■ Do not use for sealing aquariums and underwater joints. ■■ Do not use as glass adhesive during facade works. ■■ In contact with natural stones such as marble, granite, quartzite may cause stains. ■■ Cannot be painted.

Technical specification PROPERTY

UNIT

VALUE

Skin forming time

minute

13-15

Curing

mm/24 h 2,5-3 vulcanizing due to air humidity

Curing system Density (DIN 53 479-B)

colourless

g/cm³

0,99

coloured

1,26

colourless

25±2

coloured

35±2

Properties of cured sealant Hardness (Shore A) (ISO 868) Temperature resistance

˚C

-40 to +100

The parameters indicated have been measured at +23 °C and 50% relative air humidity.

Recommendation Cartridge gun PENOSIL Sealant Manual Gun.

Storage Guaranteed storage time 18 months starting from the date of manufacture if stored in a closed original package in a dry place between +5 °C and +25 °C.

GAP FILLING │ SEALANTS │ SILICONES PENOSIL Premium Greenhouse Silicone

Neutral weather proof silicone sealant with great adherence. ■■ ■■ ■■ ■■ ■■ ■■

Weather proof. Non-sagging, does not spread in the joint. Long processing time. Usage temperature between +5 °C and +40 °C. After curing, elastic even at extreme temperatures (-40 °C to +100 °C). Adheres well to glass, wood, various metallic and stone surfaces, many plastics, ceramic tiles, as well as varnished, painted and treated surfaces.

Colour Package 310 ml cartridge, 12 cartridges in box.

Sealant for facade for interior and exterior application. EN 15651-1:2012: Type F-INT-EXT: CLASS 12,5E Sealant used for sanitary applications. EN 15651-3:2012: Type S: CLASS S3

Field of application

Application conditions

■■ Glazing works in greenhouses and winter gardens. ■■ Insulation and sealing of window and door frames. ■■ Insulation and sealing of structures made of Plexiglas, layered and corrugated plastics or polycarbonate.

■■ Usage temperature between +5 °C and +40 °C.

GAP FILLING │ SEALANTS │ SILICONES PENOSIL Premium Greenhouse Silicone

Usage restrictions ■■ Do not use for sealing aquariums and underwater joints. ■■ Cannot be painted.

Technical specification PROPERTY

UNIT

VALUE

Skin forming time

minute

10-12

Curing

mm/24 h 3-4 vulcanizing due to air humidity

Curing system Density (DIN 53 479-B)

g/ cm³

0,99

Properties of cured sealant Hardness (Shore A) (ISO 868) Temperature resistance

25±2 ˚C

-40 to +100

The parameters indicated have been measured at +23 °C and 50% relative air humidity.

Recommendation Cartridge gun PENOSIL Sealant Manual Gun.

Application instruction The surfaces must be clean from fat, oil, dust and loose particles. The surface to be covered must be dry. Non-porous surfaces should be cleaned with solvent and a clean, non-fluffy cotton cloth. Solvent rests should be removed before evaporating with a clean cloth. Ensure adequate ventilation in all joint locations. During the curing process, make sure that no impurities can settle on the surface and that the joint surface is not affected by mechanical load. Do not use at temperatures under +5 °C or over +40 °C. Cut off the threaded end of the cartridge and screw on the application nozzle for directing silicone. Cut the threaded end in a way where a suitable opening for application is produced. Place the cartridge together with the applicator in the gun and fill the installation nozzle with silicone, by repeatedly pressing the gun trigger. Apply silicone in the joint by repeatedly and evenly pressing on gun trigger and smoothly dragging the nozzle continuously along the joint. After applying the silicone, smoothen it with a rubber acrylic scraper. Remove excess silicone.

Storage Guaranteed storage time 12 months starting from the date of manufacture if stored in a closed original package in a dry place between +5 °C and +25 °C.

GAP FILLING │ SEALANTS │ SILICONES PENOSIL Premium Glazing Silicone

Alkoxy cure glazing silicone with a low elastic modulus and excellent adhesive properties. Bonds perfectly with common construction materials, such as glass, aluminium, concrete, ceramic brick, PVC, wood and ceramics. ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■

Suitable for filling and sealing both indoors and outdoors. High movement (±25%) and low elastic modulus. Perfect retention of elasticity and adhesion to substrate. Easy to process and smooth. Does not cause corrosion on metals. Resistant to UV radiation, extreme temperatures and ageing. Virtually no shrinkage during the curing process. Practically odourless.

Colour Plastic cartridge:

Foil package:

Package ■■310 ml plastic cartridge, 12 pcs per box. ■■600 ml foil package, 20 pcs per box.

Fields of application

Application conditions

■■ Filling seams between windowpanes and glass doors. ■■ Filling and weatherproofing seams between glass façades. ■■ Sealing glass partition walls. ■■ All glasswork.

GAP FILLING │ SEALANTS │ SILICONES PENOSIL Premium Glazing Silicone usage restrictions ■■ Not suitable for surfaces containing bitumen or on construction materials that may emit oils, plasticisers or solvents (e.g. natural or synthetic rubber, chloroprene, EPDM rubber, etc.) ■■ Not recommended for natural stone, e.g. marble and granite. ■■ Does not adhere to polyethylene (PE), polypropylene (PP), PTFE (Teflon®) or Plexiglas (PMMA). ■■ Not suitable for use as structural glazing glue. ■■ Not paintable.

Technical specification Properties

Unit

Value

Skin-forming time

minute

15-20

Curing rate

mm/24 h

Curing system Density (DIN 53 479-B)

vulcanisation through moisture in air g/cm³

1,02

Movement (ISO 11600)

± 25

Elastic recovery (ISO 7389)

>85

Shrinkage

<10

Properties of cured sealant

Hardness (shore A) (ISO 868)

Elongation at break 12x12x50 mm joint (ISO 8339)

225

Tensile strength 12x12x50 mm joint (ISO 8339)

N/mm2

0,50

Elastic modulus at 100% elongation 12x12x50 mm joint (ISO 8339)

N/mm2

0,37

Temperature resistance

˚C

between -40 and +150

The above parameters have been measured under the following conditions: temperature 23 °C and 50% relative humidity.

recommendATION For a 310 ml cartridge: PENOSIL Sealant Manual Gun 310 ml. For a 600 ml foil package: PENOSIL Sealant Manual Gun 600 ml or PENOSIL Sealant Pneumatic Gun 300-600 ml.

Cleaning

Clean uncured sealant using PENOSIL Premium Cleaning Wipes. Remove cured sealant mechanically using PENOSIL Premium Silicone Remover to soften the sealant.

Storage

GAP FILLING │ SEALANTS │ SILICONES PENOSIL Premium Aquarium Silicone

The acid-curing silicone sealant with great mechanical properties and high curing speed can be used for installing and sealing aquariums as well as in various industrial solutions. ■■ ■■ ■■ ■■ ■■

■■ ■■

After curing completely safe for living organisms. Can be used on surfaces in contact with foodstuffs. Non-sagging, does not spread in the joint. Usage temperature between +5 °C and +40 °C. God adherence to various non-porous silicate materials, e.g. glass, bricks, ceramics, enamel, glazed plates and clinker; treated, varnished or painted wood, and plastics such as epoxides, polyesters, polyacrylates, and laminates. Fast curing. Great processing properties.

Colour Package 310 ml cartridge, 12 cartridges in box.

Sealant for facade for interior and exterior application, intended for use in cold climate. EN 15651-1:2012: Type F-EXT-INT-CC: CLASS 20LM Sealant used for sealing glazing applications, intended for use in cold climate. EN 15651-2:2012: Type G-CC: CLASS 20LM Sealant used for sanitary applications. EN 15651-3:2012: Type S: CLASS XS2

Field of application

Application conditions

■■ Installation of aquariums. ■■ Insulation and sealing of swimming pools and water parks. ■■ Insulation and sealing of terrariums and other glass structures. ■■ Sealing of joints exposed to mechanical stress. ■■ Sealing in food industry.

■■ Usage temperature between +5 °C and +40 °C. ■■ Before filling an aquarium with water, the sealant should be completely cured.

GAP FILLING │ SEALANTS │ SILICONES PENOSIL Premium Aquarium Silicone

Usage restrictions ■■ Do not use in applications requiring contact with natural stones like marble, granite, fibre cement and mortar as acetic acid evolves during the curing process. ■■ Due to corrosion, do not use in contact with metals such as lead, copper, brass and zinc. ■■ May discolour in contact with some plastics such as EPDM and neoprene. ■■ Cannot be painted.

Technical specification PROPERTY

UNIT

VALUE

Skin forming time

minute

10-12

Curing

mm/24 h 3-4 vulcanizing due to air humidity

Curing system Density (DIN 53 479-B)

g/ cm³

1,02

Properties of cured sealant Hardness (Shore A) (ISO 868) Temperature resistance

20±2 ˚C

-40 to +80

The parameters indicated have been measured at +23 °C and 50% relative air humidity.

Recommendation

Application instruction The surfaces must be clean from fat, oil, dust and loose particles. The surface to be covered must be dry. Non-porous surfaces should be cleaned with solvent and a clean, non-fluffy cotton cloth. Solvent rests should be removed before evaporating with a clean cloth. Ensure adequate ventilation in all joint locations. During the curing process, make sure that no impurities can settle on the surface and that the joint surface is not affected by mechanical load. Do not use at temperatures below +5 °C. Cut off the threaded end of the cartridge and screw on the application nozzle for directing silicone. Cut the threaded end in a way where a suitable opening for application is produced. Place the cartridge together with the applicator in the gun and fill the installation nozzle with silicone, by repeatedly pressing the gun trigger. Apply silicone in the joint by repeatedly and evenly pressing on gun trigger and smoothly dragging the nozzle continuously along the joint. After applying the silicone, smoothen it with a rubber acrylic scraper. Remove excess silicone.

Cartridge gun PENOSIL Sealant Manual Gun.

Storage Guaranteed storage time 12 months starting from the date of manufacture if stored in a closed original package in a dry place between +5 °C and +25 °C.

GAP FILLING │ SEALANTS │ SILICONES PENOSIL Premium FireStop Silicone

Neutral-curing silicone sealant with increased fire-proofness for filling joints exposed to fire. The material meets the class DIN 4102-B1 requirements according to DIN 4102-1:1998-05, test certificate number 376-012/09. ■■ ■■ ■■ ■■ ■■ ■■ ■■

Withstands fire up to 4 hours. Elastic, movement capability ±25%. Solvent and asbestos free. Ageing, UV and weather-proof. Neutral odour. Suitable for slightly alkaline and metallic surfaces, does not cause corrosion. Adheres well to most construction materials such as glass, bricks, ceramics, enamel, glazed stones and clinker, as well as treated, varnished or painted wood and plastics such as PVC, epoxide, polyesters, polyacrylates.

Colour Package 310 ml cartridge, 12 cartridges in box.

FIRE RESISTANCE classification according to EN 13501-2. Tested according to EN 1366-4 ”Fire resistance test for service installations. Linear joint seals”. (Equivalent to BS 476, Part 20). Tested according to EN 1366-3 ”Fire resistance test for service installations. Penetration seals”. FIRE PERFORMANCE classification: B-s3, d0 according to EN 13501-1. Tested according to EN 13823: ”Reaction to fire tests for building products” and EN-ISO 11925-2 ”Ignitability of building products subjected to direct impingement of flame”. Sealant for facade for interior and exterior application, intended for use in cold climate. EN 15651-1:2012: Type F-EXT-INT-CC: CLASS 25HM

Field of application

Application conditions

■■ Weathersealing of expansion joints where a fire resistance is required. ■■ Finishing of fire-proof doors. ■■ Sealing in construction and manufacturing industry where high fire-proofness is required.

■■ Usage temperature between +5 °C and +40 °C. ■■ The application temperature of the sealant must be between +20 °C and +25 °C. ■■ The surfaces must be dry and clean from dust, loose particles, old sealant, oil and loose particles.

GAP FILLING │ SEALANTS │ SILICONES PENOSIL Premium FireStop Silicone

Usage restrictions ■■ Do not use in contact with natural stones such as marble, granite, quartzite, as it may cause stains. ■■ May discolour in contact with some plastics such as EPDM and neoprene.

Technical specification PROPERTY

UNIT

VALUE

Skin forming time

minute

Curing

mm/24 h 2-3 vulcanizing due to air humidity

Curing system Density (DIN 53 479-B)

g/cm³

1,25

Properties of cured sealant Hardness (Shore A) (ISO 868) Temperature resistance

25 ˚C

-40 ... +150

The parameters indicated have been measured at +23 °C and 50% relative air humidity.

Application instruction The surfaces must be clean from fat, oil, dust, old sealant, and loose particles. The surface to be covered must be dry. Non-porous surfaces should be cleaned with solvent and a clean, nonfluffy cotton cloth. Solvent rests should be removed before evaporating with a clean cloth. Cut off the threaded end of the cartridge and screw on the application nozzle for directing silicone. Cut the threaded end in a way where a suitable opening for application is produced. Place the cartridge together with the applicator in the gun and fill the installation nozzle with silicone, by repeatedly pressing the gun trigger. Apply silicone in the joint by repeatedly and evenly pressing on gun trigger and smoothly dragging the nozzle continuously along the joint. After applying the silicone, smoothen it with a rubber silicone scraper. Remove excess material.

Recommendation Cartridge gun PENOSIL Sealant Manual Gun.

SAFETY REQUIREMENTS During the curing process, methanol evolves that cannot be inhaled during a longer period of time or in bigger concentrations. Ensure sufficient ventilation during application. Keep out of the reach of children. Avoid contact with skin and eyes. In case of contact with eyes, rinse immediately with water and seek medical advice. Cured sealant can be handled without any danger to health.

Storage Guaranteed storage time 12 months starting from the date of manufacture if stored in the original package in a dry place between 0 °C and 25 °C.

GAP FILLING │ SEALANTS │ SILICONES PENOSIL Standard Neutral Silicone

Neutral-curing silicone sealant with good processing properties, great adherence and a wide application area. ■■ ■■ ■■ ■■

■■ ■■ ■■ ■■ ■■ ■■

Insulates and seals in both indoor and outdoor conditions. Suitable for slightly alkaline metal surfaces. Non-sagging, does not spread in the joint. Adheres to most building materials such as stone, metal and wood materials, glass and plastic surfaces. Adheres well to porous surfaces. Excellent processing and smoothing properties. Does not lose volume during the curing process. After curing, elastic even at extreme temperatures (-40 °C to +100 °C). Mould, UV, moisture and weather resistant. Long storage time.

Colour Package 280 ml cartridge, 12 cartridges in box.

Sealant for facade for interior and exterior application, intended for use in cold climate. EN 15651-1:2012: Type F-INT-EXT-CC: CLASS 12,5E Sealant used for sanitary applications. EN 15651-3:2012: Type S: CLASS S3

Field of application

Application conditions

■■ Insulation and sealing of connections, also on surfaces where acid-curing silicone cannot be used. ■■ General construction and repair works. ■■ Interior and exterior works, wet and dry rooms. ■■ All finishing, insulation, glassing and ventilation works. ■■ Insulation and sealing of window and door frames.

■■ Usage temperature between +5 °C and +40 °C. ■■ The surfaces must be clean from dust, loose particles and oil.

GAP FILLING │ SEALANTS │ SILICONES PENOSIL Standard Neutral Silicone

Usage restrictions ■■ Do not use for sealing aquariums and underwater joints. ■■ Cannot be painted.

Technical specification PROPERTY

UNIT

VALUE

Skin forming time

minute

20-22

Curing

mm/24 h 2-3 vulcanizing due to air humidity

Curing system Density (DIN 53 479-B)

colourless

g/cm³

0,98

coloured

1,29

colourless

20±2

coloured

30±2

Properties of cured sealant Hardness (Shore A) (ISO 868) Temperatuuritaluvus

˚C

-40 to +100

The parameters indicated have been measured at +23 °C and 50% relative air humidity.

Recommendation Cartridge gun PENOSIL Sealant Manual Gun.

Storage Guaranteed storage time 18 months starting from the date of manufacture if stored in a closed original package in a dry place between +5 °C and +25 °C.

GAP FILLING │ SEALANTS │ SILICONES PENOSIL Standard Universal Silicone

Acid-curing all-purpose silicone sealant with great adherence properties and a wide application area. ■■ ■■ ■■ ■■ ■■ ■■ ■■

Insulates and seals. Non-sagging, does not spread in the joint. Excellent processing and smoothing properties. Touch-dries quickly. Adheres well to wood, glass, ceramic tiles, many plastics, and most paints. Elastic. UV and weather proof.

Colour Package 280 ml cartridge, 12 cartridges in box.

Field of application

Application conditions

■■ Insulation and sealing of connections in indoor and outdoor works. ■■ General construction and repair works. ■■ Moist and dry rooms. ■■ All finishing, insulation, glassing works. ■■ Insulation of window and door frames and light box displays.

GAP FILLING │ SEALANTS │ SILICONES PENOSIL Standard Universal Silicone

Usage restrictions ■■ Do not use in contact with natural stones such as marble and granite. ■■ Do not use in contact with fibre cement, plaster or mortar. ■■ Do not use in contact with metals such as lead, copper, brass, zinc, and steel. ■■ Do not use in contact with pre-strained polyacrylate or polycarbonate parts as they might be cracked. ■■ Do not use for sealing aquariums and underwater joints. ■■ Does not adhere to polycarbonates (layered and corrugated plastics) or Plexiglas (PMMA). ■■ Cannot be painted. ■■ May slightly shrink during the curing process.

Technical specification PROPERTY

UNIT

VALUE

Skin forming time

minute

8-10

Curing

mm/24 h 2,5-3,5 vulcanizing due to air humidity

Curing system Density (DIN 53 479-B)

colourless

g/cm³

0,95

coloured

1,01

värvitu

14±2

värvilised

18±2

Properties of cured sealant Hardness (Shore A) (ISO 868) Temperature resistance

˚C

-40 to +100

The parameters indicated have been measured at +23 °C and 50% relative air humidity.

Recommendation Cartridge gun PENOSIL Sealant Manual Gun.

Storage Guaranteed storage time 18 months starting from the date of manufacture if stored in a closed original package in a dry place between +5 °C and +25 °C.

GAP FILLING │ SEALANTS │ SILICONES PENOSIL Standard Sanitary Silicone

Acid-curing mould-resistant silicone sealant for insulation and sealing works in sanitary rooms.

■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■

Excellent processing and smoothing properties. Contains fungicides. Mould, UV, moisture and weather resistant. Touch-dries quickly. Non-sagging, does not spread in the joint. Adheres well to glass, glazed surfaces, ceramic tiles, many plastics, metals, and most paints. Elastic. Long storage time.

Colour Package 280 ml cartridge, 12 cartridges in box.

Sealant used for sanitary applications. EN 15651-3:2012: Type S: CLASS S1 (Transparent) EN 15651-3:2012: Type S: CLASS S2 (Colours)

Field of application

Application conditions

GAP FILLING │ SEALANTS │ SILICONES PENOSIL Standard Sanitary Silicone

Technical specification PROPERTY

UNIT

VALUE

Skin forming time

minutid

8-10

Curing

mm/24 h 2,5-3,5 vulcanizing due to air humidity

Curing system Density (DIN 53 479-B)

colourless

g/cm³

0,95

coloured

1,01

colourless

14±2

coloured

18±2

Properties of cured sealant Hardness (Shore A) (ISO 868) Temperature resistance

˚C

-40 to +100

The parameters indicated have been measured at +23 °C and 50% relative air humidity.

Recommendation Cartridge gun PENOSIL Sealant Manual Gun.

Storage Guaranteed storage time 18 months starting from the date of manufacture if stored in a closed original package in a dry place between +5 °C and +25 °C.

GAP FILLING │ SEALANTS │ ACRYLIC SEALANTS PENOSIL PREMIUM ACRYLIC SEALANT

High-quality water based universal acrylic sealant for filling little-moving cracks and joints.

■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■

Comfortable use Non-sagging, does not spread in the joint Bright white Low odour level Forms a plastic connection Paintable Good adherence on most building materials Moisture resistant 5 hours after application High UV-level

Colour Package ■■310 ml cartridge, 12 cartridges in box ■■600 ml foil package, 12 packages in box

Sealant for façade for interior application. EN 15651-1:2012: Type F-INT Sealant used for sanitary applications. EN 15651-3:2012: Type S

Field of application

Application conditions

■■ Filling of wall cracks and joints ■■ Filling the joints between window frames and walls ■■ Filling of joints between plasterboards and filling of screw holes ■■ Correction of surface defects before painting

■■ Usage temperature between +5 °C and +40 °C. ■■ The surfaces must be dry and clean from dust, loose particles, old sealant and oil.

GAP FILLING │ SEALANTS │ ACRYLIC SEALANTS PENOSIL PREMIUM ACRYLIC SEALANT

Usage restrictions ■■ Not suitable for joints with considerable movement (more than 8% of joint width). ■■ Not suitable for connections in permanent contact with water. ■■ Not suitable in connection with bitumen surfaces. ■■ Poor adherence to glass and some plastics. ■■ May cause corrosion on exposed metal surfaces. ■■ After curing, cannot be grinded as putty,

Technical specification PROPERTY

UNIT

VALUE

Skin forming time

minute

5-7

Curing

mm/24 h

2,5-3

Curing system Density (DIN 53 479-B)

dries g/cm³

1,65

Properties of cured sealant Elongation at breaking point (ISO 8339) Hardness (Shore A) (ISO 868)

36±2

Decreasing in joint

7-10

Temperature resistance

˚C

-30 to +75

The parameters indicated have been measured at 23 °C and 50% relative air humidity.

Recommendation For a 310 ml cartridge, we recommend using the PENOSIL Sealant Manual Gun 310 ml. For a 600 ml foil package, we recommend using the PENOSIL Sealant Manual Gun 600 ml. or PENOSIL Sealant Pneumatic Gun 300-600 ml.

Cleaning For uncured sealant, use a cloth dampened with water or the PENOSIL Premium Cleaning Wipes. Cured sealant can only be removed mechanically, thereafter with a moist cloth.

SAFETY REQUIREMENTS Ensure sufficient ventilation during application. Keep out of the reach of children. Avoid contact with skin and eyes. In case of contact with eyes, rinse immediately with water and seek medical advice. Cured sealant can be handled without any danger to health.

Application instruction The surfaces must be clean from fat, oil, dust and loose particles. The surface to be covered must be dry. Porous materials should be primed with water diluted acrylic (1:2) first. Ensure adequate ventilation in all joint locations. During the curing process, make sure that no impurities can settle on the surface and that the joint surface is not affected by mechanical load. Do not use at temperatures below +5 °C. 310 ml cartridge: Cut off the threaded end of the cartridge and screw on the application nozzle for directing acrylic. Cut the threaded end in a way where a suitable opening for application is produced. Place the cartridge together with the applicator in the gun and fill the installation nozzle with acrylic, by repeatedly pressing the gun trigger. Apply acrylic in the joint by repeatedly and evenly pressing on gun trigger and smoothly dragging the nozzle continuously along the joint. After applying the acrylic, smoothen it with a rubber acrylic scraper. Remove excess acrylic. 600 ml foil package: Open the application nozzle of the gun, insert the package in the gun and open on the applicator side by removing the fastening clamp. Place the applicator nozzle on the opened end and screw on the cap. Apply acrylic in the joint by repeatedly and evenly pressing on gun trigger and smoothly dragging the nozzle along the joint. After application, smooth the acrylic surface with a rubber silicone scraper and remove excess material. Maximum connection surface 30x20 mm, whereby for bigger joints, the joints should be filled in two layers, thereby letting the first layer completely dry (curing speed 2.5-3 mm a day). Can be painted after final drying the duration of which depends on joint dimensions (curing speed 2.5-3 mm a day). If painted earlier, the drying of acrylic may cause cracks in the paint.

Storage Guaranteed storage time 12 months starting from the date of manufacture if stored in a closed original package in a dry place between 0 °C and 25 °C. Avoid storage in cold and at over +25 °C. Short-term cold resistance 10 days at up to -18 °C.

GAP FILLING | SEALANTS | ACRYLIC SEALANTS PENOSIL Premium SilAcryl Exterior & Interior

High-quality plastoelastic siliconised acrylic sealant with high movement capability for filling cracks and joints. Can be used in internal and external conditions as well as in joints where the movement capability of common acrylic is not sufficient. ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■

High movement capability (±12.5%). Simple and convenient application. Adheres well to many different materials such as wood, concrete, gypsum board, PVC and various metals. Thixotropic, does not flow into the joint. Bright white with an extra-smooth surface. Solvent and phthalate free and odourless. Forms a plastic connection. Can be painted over. High UV resistance. Environmentally friendly.

Colour Package ■■310 ml plastic cartridge, 12 pcs per box. ■■600 ml foil package, 20 pcs per box.

Sealant for façade applications, both indoors and outdoors. EN 15651-1:2012: Type F-EXT-INT-CC: CLASS 12.5E Sealant for sanitary applications. EN 15651-3:2012: Type S: CLASS XS1 Can be used in contact with ventilation devices pursuant to VDI 6022-le, tested according to EN ISO 846.

Field of application

Application conditions

■■ Filling cracks and joints, for instance between the ceiling and wall. ■■ Filling joints between window frames and walls. ■■ Repairing surface imperfections before paint finishing. ■■ Ventilation work.

■■ Application temperature range: from +5 °C to +40 °C. ■■ Surfaces must be dry and free of dust, loose particles, old sealant and oil. ■■ Cures by means of evaporation of water. An environment with high air humidity or low air temperature prolongs curing time. ■■ Acrylic is paintable. As there are so many different types of paints, it is recommended to always test the suitability of the paint beforehand.

GAP FILLING | SEALANTS | ACRYLIC SEALANTS PENOSIL Premium SilAcryl Exterior & Interior

Usage restrictions ■■ Not suitable for use in joints or connections with a movement capacity over 12.5%. ■■ Not suitable for use in connections that are in constant contact with water. ■■ Not suitable for use in connections with bitumen surfaces or materials from which oils, plasticizers or solvents may leak or which may release by-products which can have an impact on the curing or adhering properties of the acrylic or which may cause colour changes. ■■ May cause corrosion on the surface of uncovered metal. ■■ Unlike plaster, cannot be polished when cured.

Technical specification PROPERTY

UNIT

VALUE

Skin forming time

minute

8-10

Curing system

dries

Density (DIN 53 479-B)

g/cm³

1,42

Flow resistance (ISO 7390)

Elongation at break (ISO 37)

350

Elastic modulus at 100% elongation, (ISO 37)

N/mm2

0,32

Tensile strength (ISO 37)

N/mm

0,39

Properties of cured sealant

Hardness (shore A) (ISO 868) Temperature resistance

10 ˚C

-30 to +75

The parameters indicated have been measured at +23 °C and 50% relative air humidity.

Recommendation For a 310 ml cartridge: PENOSIL Cartridge Gun 310 ml. For a 600 ml foil package: PENOSIL Sealant Foil Pack Gun or PENOSIL Foil Pack Pneumatic Gun 300-600 ml.

Cleaning Clean uncured sealant using a water-moistened cloth or PENOSIL Premium Cleaning Wipes. Wash hands and the tools immediately with water after use. To remove cured sealant, first remove mechanically, thereafter with a moist cloth.

SAFETY REQUIREMENTS Sufficient ventilation must be provided during use of the product. Keep out of the reach of children. Avoid contact with skin and eyes. If the product gets into your eyes, rinse them with water immediately and see a doctor. Handling cured sealant does not involve any health risks.

Application instruction The surfaces to be bonded must be free of grease, oil, dust and loose particles. The surface to be covered must be dry. Ensure sufficient ventilation in all jointed locations. During curing, make sure no dirt falls onto the material’s surface and that the surface of the joint is not under mechanical stress. Do not use at temperatures below +5 °C. 310 ml plastic cartridge: Cut off the threaded end of the cartridge and screw on the application nozzle to direct the acrylic. Cut the nozzle so that the hole is sufficient for application of the necessary amount of the product. Place the cartridge and the nozzle in the gun and fill the application nozzle with acrylic by repeatedly pressing the gun’s trigger. Apply the acrylic to the joint by pressing the gun’s trigger repeatedly and evenly and by dragging the nozzle steadily across the joint. After application, smooth the acrylic with a rubber smoothing tool. Remove excess acrylic. 600 ml foil package: open the gun’s dispenser nozzle, place the package in the gun and open its dispenser-side end by removing the bracket. Place the dispenser nozzle on the open end and screw on the cap. Install the acrylic in the joint by pressing the gun trigger repeatedly and evenly and dragging the nozzle smoothly along the joint. After application, smooth the surface of the acrylic with a rubber smoothing tool and remove any excess material. Paintable after final drying, the duration of which depends on the size, air temperature and moisture level (generally 3-12h) of the joint.

STORAGe Guaranteed storage time: 12 months from date of production when stored in original package in a dry place at temperatures between +5 °C and +30 °C.

GAP FILLING │ SEALANTS │ ACRYLIC SEALANTS PENOSIL Premium FireStop Acrylic

Single-component water-based acrylic sealant for little-moving internal cracks and joints. Recommended for low expansion construction joints and for sealing service penetrations through fire rated structures. FIRE RESISTANCE classification according to EN 13501-2. Tested according to EN:1366-4 “Fire resistance test for service installations. Linear joint seals.” Tested according to EN:1366-3 “Fire resistance test for service installations. Penetration seals.” ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■

Withstands fire up to 4 hours. Solvent, asbestos and halogen free. Movement resistance up to 5%. Neutral odour. Forms a plastic connection. Paintable. Good adherence on most building materials. Water-solvable and cleanable. High UV-resistance, weather and ageing proof. Can be used outdoors (provided there is no permanent contact with moisture).

Colour Package 310 ml cartridge, 12 cartridges in box

Sealant for façade for interior application. EN 156511:2012: Type F-INT

Field of application

Application conditions

■■ Finishing of fire-proof doors. ■■ Sealing wall cracks as well as wall and ceiling joints. ■■ Sealing of joints of windowsills and window-cheeks. ■■ Sealing of feedthroughs.

■■ Usage temperature between +5 °C and +40 °C. ■■ The surfaces must be dry and clean from dust, loose particles, old sealant, oil and loose particles.

GAP FILLING │ SEALANTS │ ACRYLIC SEALANTS PENOSIL Premium FireStop Acrylic

Usage restrictions ■■ Not suitable for joints with considerable movement (more than 5% of joint width). ■■ Not suitable for connections in permanent contact with water. ■■ Not suitable in connection with bitumen surfaces. ■■ Poor adherence to glass and some plastics. ■■ May cause corrosion on exposed metal surfaces. ■■ After curing, cannot be grinded as putty,

Application instruction

The parameters indicated have been measured at 23 °C and 50% relative air humidity.

The surfaces must be clean from fat, oil, dust, old sealant, and loose particles. The surface to be covered must be dry. Porous materials should be primed with water diluted acrylic (1:1 to 1:4) first. Ensure adequate ventilation in all joint locations. During the curing process, make sure that no impurities can settle on the surface and that the joint surface is not affected by mechanical load or water. Do not use at temperatures below +5 °C. Cut off the threaded end of the cartridge and screw on the application nozzle for directing acrylic. Cut the threaded end in a way where a suitable opening for application is produced. Place the cartridge together with the applicator in the gun and fill the installation nozzle with acrylic, by repeatedly pressing the gun trigger. Apply acrylic in the joint by repeatedly and evenly pressing on gun trigger and smoothly dragging the nozzle continuously along the joint. After applying the acrylic, smoothen it with a rubber acrylic scraper. Remove excess acrylic.

Recommendation

Storage

For a 310 ml cartridge we recommend using the PENOSIL Premium Cartridge Gun.

Guaranteed storage time 12 months starting from the date of manufacture if stored in a closed original package in a dry place between 0 °C and 30 °C. Avoid storage in cold and at over +30 °C

Technical specification PROPERTY

UNIT

VALUE

Skin forming time

minute

approx. 20

Curing

mm/24 h

2–3

Curing system Density (DIN 53 479-B)

dries g/ cm³

≈1,65

±7,5

Properties of cured sealant Movement capability (ISO 11600) Hardness (Shore A) (ISO 868) Temperature resistance

35±5 ˚C

-25 to +80

Cleaning For uncured sealant, use a cloth dampened with water or the PENOSIL Premium Cleaning Wipes. Cured sealant can only be removed mechanically, thereafter with a moist cloth.

SAFETY REQUIREMENTS Ensure sufficient ventilation during application. Keep out of the reach of children. Avoid contact with skin and eyes. In case of contact with eyes, rinse immediately with water and seek medical advice. Cured sealant can be handled without any danger to health.

GAP FILLING │ SEALANTS │ ACRYLIC SEALANTS PENOSIL Standard Acrylic Sealant

Single-component water based universal acrylic sealant for filling little-moving cracks and joints. ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■

Comfortable use. Low odour level. Forms a plastic connection. Non-sagging, does not spread in the joint. Paintable. Good adherence on most building materials. Moisture resistant 5 hours after application. High UV-level.

Colour Package 280 ml cartridge, 12 cartridges in box.

Sealant for façade for interior application. EN 15651-1:2012: Type F-INT Sealant used for sanitary applications. EN 15651-3:2012: Type S: CLASS XS1

Field of application

Application conditions

■■ Filling of wall cracks and joints. ■■ Filling the joints between window frames and walls. ■■ Filling of joints between plasterboards and filling of screw holes. ■■ Correction of surface defects before painting.

■■ Usage temperature between +5 °C and +40 °C. ■■ The surfaces must be dry and clean from dust, loose particles, old sealant and oil.

GAP FILLING │ SEALANTS │ ACRYLIC SEALANTS PENOSIL Standard Acrylic Sealant

Technical specification PROPERTY

UNIT

VALUE

Skin forming time

minute

4-5

Curing

mm/24 h

2,5-3

Curing system Density (DIN 53 479-B)

dries g/cm³

1,71

Properties of cured sealant Elongation at breaking point (ISO 8339) Hardness (Shore A) (ISO 868)

36±3

Decreasing in joint

10-15

Temperature resistance

˚C

-20 to +70

The parameters indicated have been measured at 23 °C and 50% relative air humidity.

Recommendation Cartridge gun PENOSIL Sealant Manual Gun 310 ml.

Cleaning For uncured sealant, use a cloth dampened with water or the PENOSIL Premium Cleaning Wipes. Cured sealant can only be removed mechanically, thereafter with a moist cloth.

SAFETY REQUIREMENTS Ensure sufficient ventilation during application. Keep out of the reach of children. Avoid contact with skin and eyes. In case of contact with eyes, rinse immediately with water and seek medical advice. Cured sealant can be handled without any danger to health.

Application instruction The surfaces must be clean from fat, oil, dust and loose particles. The surface to be covered must be dry. Porous materials should be primed with water diluted acrylic (1:2) first. Ensure adequate ventilation in all joint locations. During the curing process, make sure that no impurities can settle on the surface and that the joint surface is not affected by mechanical load. Do not use at temperatures below +5 °C. Cut off the threaded end of the cartridge and screw on the application nozzle for directing acrylic. Cut the threaded end in a way where a suitable opening for application is produced. Place the cartridge together with the applicator in the gun and fill the installation nozzle with acrylic, by repeatedly pressing the gun trigger. Apply acrylic in the joint by repeatedly and evenly pressing on gun trigger and smoothly dragging the nozzle continuously along the joint. After applying the acrylic, smoothen it with a rubber acrylic scraper. Remove excess acrylic. Maximum connection surface 30x20 mm, whereby for bigger joints, the joints should be filled in two layers, thereby letting the first layer completely dry (curing speed 2.5-3 mm a day). Can be painted after final drying the duration of which depends on joint dimensions (curing speed 2.5-3 mm a day). If painted earlier, the drying of acrylic may cause cracks in the paint.

GAP FILLING │ SEALANTS │ SPECIALTY SEALANTS PENOSIL Premium PU-Sealant High Modulus

High-quality moisture-curing sealant with a high elasticity modulus, especially resistant to mechanical load. ■■ ■■ ■■ ■■ ■■ ■■

■■ ■■ ■■

Insulates and seals in both indoor and outdoor conditions. Adheres well to porous surfaces. Permanent elasticity. Noise-suppressing effect. Resistant to water, cleaning agents, oils, carbohydrates, acids and diluted alkali. Adheres to most building materials such as stone, metal and wood materials, glass and plastic surfaces. Excellent processing and smoothing properties. Does not shrink in the joint. UV, moisture and weather proof.

Colour Package ■■600 ml foil package, 20 packages in box. ■■310 ml cartridge, 12 cartridges in box.

Field of application

Application conditions

■■ Joining connections, filling joints in concrete buildings, especially on the floor. ■■ Sealing welding joints. ■■ Sealing and noise suppression in wagon building and in metal joints. ■■ Sealing and adhesion in ship and boat building (ship deck building). ■■ Sealing of glass structures and varnished surfaces. ■■ Adhesion of panels, window sills, thresholds and fillets. ■■ Joining elements made from porcelain, steel, stainless steel, plastic (polyester and many PVCs), painted wood, concrete and bricks.

■■ Usage temperature between +5 °C and +40 °C. ■■ The surfaces must be clean from dust, loose particles and oil. ■■ Prior to using the sealant, let the concrete surfaces dry for at least 4 weeks. ■■ Make an adhesion test of silicone-coated surfaces in order to verify the chemical and adhesion compatibility of materials, also check the colour. ■■ The size of the joint should be selected in accordance with the moving of the joint. The width of the joint should be 6 to 40 mm. At a width of 10 mm, the depth of the joint should equal the width of the joint. Should the joint be wider than 10 mm, the depth of the joint should be a half of the width if the joint.

GAP FILLING │ SEALANTS │ SPECIALTY SEALANTS PENOSIL Premium PU-Sealant High Modulus

Usage restrictions ■■ Only completely cured sealant may be painted with an adhering dispersion paint (acryl, vinyl). A paint test should be made before. Movement of the joint may cause cracking in the painted surface. ■■ Outdoor use in areas where the temperature in winter does not fall below -20 ˚C.

Technical specification PROPERTIES

UNIT

VALUE

Skin forming time

minute

approx. 45

Curing

mm/24h

≥3

Curing system Density

vulcanising due to air humidity g/cm³

1,3

Properties of cured sealant Hardness (Shore A) (ISO 868)

35-40

Modulus of elasticity in 100% elongation (ISO 8339)

MPa

0,35-0,45

Tensile strength (ISO 8339)

MPa

0,60

Movement of the joint

Elongation at breaking point (ISO 8339)

250

Elasticity recovery

> 70

Temperature resistance

˚C

-40 to +80

The parameters indicated have been measured at 23 °C and 50% relative air humidity.

Cleaning Uncured sealant can be removed with lacquer petroleum, hands can be cleaned with PENOSIL Premium Cleaning Wipes.

SAFETY REQUIREMENTS Ensure sufficient ventilation during application. Keep out of the reach of children. Avoid contact with skin and eyes. In case of contact with eyes, rinse immediately with water and seek medical advice. Cured sealant can be handled without any danger to health.

Application instruction The surfaces must be free from fat, oil, dust and loose particles. The surface to be covered must be dry. Ensure adequate ventilation in all joint locations. During the curing process, make sure that no impurities can settle on the surface and that the joint surface is not affected by mechanical load. Do not use at temperatures below +5 °C. 310 ml cartridge: Cut off the threaded end of the cartridge and screw on the application nozzle for directing silicone. Cut the threaded end in a way where a suitable opening for application is produced. Place the cartridge together with the applicator in the silicone gun and fill the installation nozzle with silicone, by repeatedly pressing the gun trigger. Fill the joint by evenly pressing on gun trigger and dragging the nozzle along the joint. 600 ml foil package: Open the application nozzle of the gun, insert the package in the gun and open on the applicator side by removing the fastening clamp. Place the applicator nozzle on the opened end and screw on the cap. It is recommended to apply a thin layer of PU-primer on porous surfaces in order to improve their adherence. After the primer has dried, lay a joint cord not adhering to PU-sealant on the bottom of the joint. Apply sealant in the joint by repeatedly and evenly pressing on gun trigger and smoothly dragging the nozzle along the joint. Wider joints should be covered in three application sessions, by covering the two side parts and thereafter the bot tom of the joint. Press the sealant thoroughly against the edges and the joint bottom, until no air bubbles emerge anymore. After application, smooth the surface with a rubber scraper and remove excess material.

Storage Guaranteed storage time 12 months starting from the date of manufacture if stored in a closed original package in a dry place between +5 °C and +30 °C.

GAP FILLING │ SEALANTS │ SPECIALTY SEALANTS PENOSIL Premium PU-Sealant Low Modulus

High-quality moisture-curing sealant with a low elasticity modulus for sealing concrete buildings.

■■ ■■ ■■ ■■ ■■

■■ ■■ ■■

Insulates and seals in both indoor and outdoor conditions. Adheres well to porous surfaces. Permanent elasticity. Resistant to water, cleaning agents, oils, carbohydrates, acids and diluted alkali. Adheres to most building materials such as stone, metal and wood materials, glass and plastic surfaces. Excellent processing and smoothing properties. Does not shrink in the joint. UV, moisture and weather proof.

Colour Package 600 ml foil package, 20 packages in box.

Field of application

Application conditions

■■ Filling of expansion joints in concrete floor and masonries. ■■ Sealing in façade works of concrete buildings. ■■ Sealing of door and window frames in concrete buildings. ■■ Sealing of bigger joints and connections in buildings. ■■ Sealing of glass structures and varnished surfaces in concrete buildings. ■■ Joining elements made from porcelain, steel, stainless steel, plastic (polyester and many PVCs), painted wood, concrete and bricks.

GAP FILLING │ SEALANTS │ SPECIALTY SEALANTS PENOSIL Premium PU-Sealant Low Modulus

Technical specification PROPERTIES

UNIT

VALUE

Skin forming time

minute

approx. 75

Curing

mm/24h

≥ 2,5

Curing system Density

vulcanising due to air humidity g/cm³

1,3

Properties of cured sealant Hardness (Shore A) (ISO 868)

20-25

Modulus of elasticity in 100% elongation (ISO 8339)

MPa

0,20-0,25

Tensile strength (ISO 8339)

MPa

0,60

Movement of the joint

Elongation at breaking point (ISO 8339)

250

Elasticity recovery

>70

Temperature resistance

˚C

-40 to +80

The parameters indicated have been measured at 23 °C and 50% relative air humidity.

Application instruction The surfaces must be free from fat, oil, dust and loose particles. The surface to be covered must be dry. Ensure adequate ventilation in all joint locations. During the curing process, make sure that no impurities can settle on the surface and that the joint surface is not affected by mechanical load. Do not use at temperatures below +5 °C. Open the application nozzle of the gun, insert the package in the gun and open on the applicator side by removing the fastening clamp. Place the applicator nozzle on the opened end and screw on the cap. It is recommended to apply a thin layer of PU-primer on porous surfaces in order to improve their adherence. After the primer has dried, lay a joint cord not adhering to PU-sealant on the bottom of the joint. Apply sealant in the joint by repeatedly and evenly pressing on gun trigger and smoothly dragging the nozzle along the joint. Wider joints should be covered in three application sessions, by covering the two side parts and thereafter the bottom of the joint. Press the sealant thoroughly against the edges and the joint bottom, until no air bubbles emerge anymore. After application, smooth the surface with a rubber silicone scraper and remove excess material.

Cleaning Recommendation Silicone gun PENOSIL Sealant Manual Gun or

Uncured sealant can be removed with lacquer petroleum, hands can be cleaned with PENOSIL Premium Cleaning Wipes.

PENOSIL Sealant Pneumatic Gun 300-600 ml.

SAFETY REQUIREMENTS Ensure sufficient ventilation during application. Keep out of the reach of children. Avoid contact with skin and eyes. In case of contact with eyes, rinse immediately with water and seek medical advice. Cured sealant can be handled without any danger to health.

Storage Guaranteed storage time 12 months starting from the date of manufacture if stored in a closed original package in a dry place between +5 °C and +30 °C.

GAP FILLERS | SEALANTS | SPECIALTY SEALANTS PENOSIL Premium Floor Joint Hybrid 25HM

High-quality, hybrid-polymer based sealant for filling concrete floor joints in interior conditions. Cures in the presence of moisture. Excellent adhesion properties and movement capability. In addition to filling shrinkage control joints, suits well for use in sealing the deformation, connection and boundary joints of a building, for example joints between concrete elements, joints in masonry, window and door frame perimeters, stairs, balconies. ■■ A hybrid sealant with high movement (±25%) and high

elastic modulus.

■■ Excellent adhesion with many porous and non-

■■ ■■ ■■ ■■ ■■ ■■ ■■

porous surfaces, such as concrete, fibre concrete, bricks, ceramic tiles, various types of metal, including anodised aluminium, wood, melamine, PVC. Does not contain solvents, isocyanates or any other harmful ingredients. No bubbles are formed during curing, virtually no shrinkage. Resistant to mechanical load. Noise and vibration dampening properties. Does not cause corrosion on metals. Once cured, it is UV, moisture and weather-resistant. Paintable with water-based paints.

Colour Package 600 ml foil package, 20 pcs per box.

A sealant for façade jobs both indoors and outdoors, can also be used in cold climates. EN 15651-1:2012: Type F-INT-EXT-CC: CLASS 25HM A walkway and floor sealant to be used indoors. EN 15651-4:2012: Type PW-INT: CLASS 25HM

Field of application

Application conditions

■■ Filling shrinkage compensation joints. ■■ Filling joints of various floorings, e.g. ceramic floor tiles, wood and laminate parquet. ■■ Filling the joints between stairs and wall. ■■ Sealing joints between concrete elements, joints in masonry, window and door perimeters. ■■ Sealing work where good adhesion and joint movement of a sealant is expected: wooden frame houses, trailers, site accommodations. ■■ Sealing and gluing during ventilation jobs.

■■ Application temperature range: from +5 °C to +40 °C. ■■ Surfaces must be dry and free from dust, loose particles, grease and oil.

GAP FILLERS | SEALANTS | SPECIALTY SEALANTS PENOSIL Premium Floor Joint Hybrid 25HM

Usage restrictions ■■ Not suitable for surfaces containing bitumen or on construction materials that may emit oils, plasticisers or solvents (e.g. natural or synthetic rubber, chloroprene, EPDM rubber). ■■ Does not adhere to polyethylene (PE), polypropylene (PP), PTFE (Teflon®). Due to the abundance of materials, we recommend testing the suitability and adhesion of the product before use. If necessary, use a primer to improve adhesion. ■■ Not suitable for use in areas where contact with natural stone (e.g. marble or granite) is expected. ■■ Paintability: a cured sealant can be painted with various water-based paints. As there are many different paints and varnishes available, we recommend always testing the suitability prior to painting.

Technical specification PROPERTY

UNIT

VALUE

Skin forming time

minute

20-45

Curing rate

mm/24 h

2-3

Curing system Density

vulcanising due to air humidity g/cm³

1,36

±25

Properties of cured sealant Movement capability Hardness Shore A

approx. 35

E-modulus 100% (12x12x50 joint, ISO 8339)

MPa

0,6

Tensile strength (12x12x50, joint ISO 8339)

MPa

1,5

Elongation at break (12x12x50 joint, ISO 8339)

>550

Service temperature

˚C

-40 to +90

The values specified were obtained at 23 °C and 50% relative humidity.

Recommendation For a 600 ml foil package we recommend using the PENOSIL Premium Foil Pack Gun, for voluminous jobs PENOSIL Foil Pack Pneumatic Gun.

Cleaning Uncured sealant can be removed using spirit or acetone, hands can be cleaned with PENOSIL Premium Cleaning Wipes. Cured product can only be removed mechanically.

SAFETY REQUIREMENTS Ensure sufficient ventilation during application. Keep out of the reach of children. Avoid contact with skin and eyes. In case of contact with eyes, rinse immediately with water and seek medical advice. Cured sealant can be handled without any danger to health.

Application instruction Prior to sealing the joints, the main shrinkage of concrete must be already completed. Surfaces must be dry and free from dust, loose particles, grease and oil. In case of porous surfaces it is recommended to finish the substrate with a thin primer layer to improve adhesion. Once the primer is dry, a backer rod not adhering to the sealant should be installed. The purpose of a backer rod is to ensure the correct depth of the joint and avoid three-sided adhesion of the sealant and to give the sealant the desired shape. The diameter of the backer rod must be approx. 25% bigger than the width of the joint. The ratio between the width and thickness of the sealant layer is from 1:1 to 3:1. In case of an ideal joint the ratio is 2:1. Installation of a sealant supplied in 600 ml foil package with a gun. Open the gun’s dispenser nozzle, place the package in the gun and open its dispenser side end by removing the bracket. Place the dispenser nozzle on the open end and screw on the cap. Install the sealant in the joint by pressing the gun trigger recurrently and evenly and dragging the nozzle smoothly along the joint. To achieve the best results but in particular in case of wide joints, the sealant must be applied in three stages: first on the sides and then in the middle. Once the sealant has been applied, it has to be pressed slightly against the backer rod and side surfaces to ensure that it is correctly installed and takes the desired shape. Usually special tools are used for it, e.g. a wooden spatula. To make the spatula more convenient to use, it has to be moistened before use, preferably in soapy water. Excessive sealant must be completely removed and the top surface of the sealant must be smoothened. It is very important that processing and smoothening the sealant take place before skin is formed on the top surface of the sealant. During curing, make sure no dirt falls on the material’s surface and that the surface of the joint is not under mechanical stress. Ensure sufficient ventilation in all jointed locations.

Storage Guaranteed storage time is 12 months from the manufacturing date if stored in a closed original package in a dry place between +5 °C and +30 °C.

GAP FILLERS | SEALANTS | SPECIALTY SEALANTS PENOSIL Premium Facade Joint Hybrid 25LM

High-quality sealant with a low elastic modulus for weatherproofing concrete and stone façade joints. Based on hybrid binder and cures upon exposure to atmospheric moisture. ■■ With high movement (±25%) and low elastic modulus. ■■ Good adhesion with many porous and non-porous ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■

surfaces, such as concrete and ceramic or silicate bricks, various metals, wood, glass, PVC, etc. Adheres also to damp surfaces. Does not cause corrosion on metals. Environmentally friendly, does not contain solvents, silicones or isocyanates. Paintable with water-based paints. Permanently elastic and resistant to mechanical load. Noise and vibration dampening properties. Will not shrink in the joint. Once cured UV, moisture and weather-resistant.

Colour Package 600 ml foil package, 20 pcs per box.

A sealant for façade jobs both indoors and outdoors, can also be used in cold climates. EN 15651-1:2012: Type F-INT-EXT-CC: CLASS 25LM

Field of application

Application conditions

■■ Filling deformation, connection and boundary joints on concrete façades. ■■ Sealing joints in the masonry ■■ Window and doorframe perimeter sealing. ■■ Sealing stairs, balconies, etc. ■■ Sealing various penetrations. ■■ Ventilation work.

■■ Application temperature range: from +5 °C to +40 °C. ■■ Surfaces must be dry and free from dust, loose particles, grease and oil.

GAP FILLERS | SEALANTS | SPECIALTY SEALANTS PENOSIL Premium Facade Joint Hybrid 25LM

Usage restrictions ■■ Not suitable for surfaces containing bitumen or on construction materials that may emit oils, plasticisers or solvents (e.g. natural or synthetic rubber, chloroprene, EPDM rubber). ■■ Does not adhere to polyethylene (PE), polypropylene (PP), PTFE (Teflon®). Due to the abundance of materials, we recommend testing the suitability and adhesion of the product before use. If necessary, use a primer to improve adhesion. ■■ Only fully cured sealant can be paint finished by using a water-based paint adhering to it. Prior to paint finishing a painting test has to be conducted. Movement of the joint may cause cracks in the painted surface.

Technical specification PROPERTY

UNITS

VALUE

Skin forming time

minute

50-70

Curing rate

mm/24 h

3-4

Curing system Density

vulcanising due to air humidity g/cm³

1,44

± 25

Properties of cured sealant Movement capability Hardness Shore A

E-modulus 100% (12x12x50, joint ISO 8339)

MPa

0,32

Tensile strength (12x12x50, joint ISO 8339)

MPa

0,60

Elongation at break (12x12x50, joint ISO 8339)

425

Service temperature

˚C

-40 to +80

The values specified were obtained at 23 °C and 50% relative humidity.

Recommendation For a 600 ml foil package we recommend using the PENOSIL Premium Foil Pack Gun, for voluminous jobs PENOSIL Foil Pack Pneumatic Gun.

Cleaning Clean uncured sealant using spirit or acetone, for cleaning hands PENOSIL Premium Cleaning Wipes. Cured sealant should be removed first mechanically and after it can be softened by using PENOSIL Premium Silicone Remover. Residues should be removed with water and a piece of cloth.

SAFETY REQUIREMENTS Ensure sufficient ventilation during application. Keep out of the reach of children. Avoid contact with skin and eyes. In case of contact with eyes, rinse immediately with water and seek medical advice. Cured sealant can be handled without any danger to health.

Application instruction Prior to sealing the joints, the main shrinkage of concrete must already be completed. Surfaces must be dry and free from dust, loose particles, grease and oil. In case of porous surfaces it is recommended to finish the substrate with a thin primer layer to improve adhesion. Once the primer is dry, a backer rod not adhering to the sealant should be installed. The purpose of a backer rod is to ensure the correct depth of the joint and three-sided adhesion of the sealant and to give the sealant the desired shape. The diameter of the backer rod must be approx. 25% bigger than the width of the joint. The ratio between the width and thickness of the sealant layer is from 1:1 to 3:1. In case of an ideal joint the ratio is 2:1. Installation of a sealant supplied in 600 ml foil package with a gun. Open the gun’s dispenser nozzle, place the package in the gun and open its dispenser side end by removing the bracket. Place the dispenser nozzle on the open end and screw on the cap. Install the sealant in the joint by pressing the gun trigger recurrently and evenly and dragging the nozzle smoothly along the joint. To achieve the best results but in particular in case of wide joints, the sealant must be applied in three stages: first on the sides and then in the middle. Once the sealant has been applied, it has to be pressed slightly against the backer rod and side surfaces to ensure that it is correctly installed and takes the desired shape. Usually special tools are used for it, e.g. a wooden spatula. To make the spatula more convenient to use, it has to be moistened before use, preferably in soapy water. Excessive sealant must be completely removed and the top surface of the sealant must be smoothened. It is very important that processing and smoothing the sealant take place before skin is formed on the top surface of the sealant. During curing, make sure no dirt falls on the material’s surface and that the surface of the joint is not under mechanical stress. Ensure sufficient ventilation in all jointed locations.

Storage Guaranteed storage time is 12 months from the manufacturing date if stored in a closed original package in a dry place between +5 °C and +30 °C.

GAP FILLING │ SEALANTS │ SPECIALTY SEALANTS PENOSIL Premium Parquet Sealant

Plastoelastic acrylic sealant for sealing joints in varnished and unvarnished parquet and laminate floors. ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■

Insulates and seals wood and laminate joints. Can be polished after full curing. Paintable. Almost odour-free. Shrinks slightly in the course of curing and becomes very hard. Resists surface movements of up to 5%. In addition to wood, adheres well to concrete, plaster, cement, plaster boards, bricks and metals. Solvent free. Usable on damp primed surfaces if adequate ventilation is ensured.

Package 310 ml cartridge, 12 cartridges in box.

Colour PF37

PF86

PF90

PF92

PF96

beech

maple, ash, pinetree

dark oak

alder, fir

oak

PF103

PF104

PF106

reddish mahogany, dark cherry, merbau walnut brown alder

PF343

PPF100

wenge

smoked wood

Field of application

Application conditions

■■ Sealing of varnished and unvarnished parquet and laminate floors. ■■ Smoothing of surfaces in carpentry and joiner works. ■■ Furniture restoration.

■■ Usage temperature between +5 °C and +40 °C. ■■ The surfaces must be clean from dust, wax, oil and loose particles.

GAP FILLING │ SEALANTS │ SPECIALTY SEALANTS PENOSIL Premium Parquet Sealant

Usage restrictions

Application instruction

■■ Do not use on surfaces in permanent contact with water. ■■ High moisture level slows down the drying process. ■■ Putty does not resist high deformations, in moving joints, elastic materials such as silicone sealants should be used.

Technical specification PROPERTIES

UNIT

VALUE

Skin forming time

min.

3-5

Curing

mm/24 h

1-2

Curing system Density (DIN 53 479-B)

dries g/cm³

1,7-1,74

Properties of cured sealant Hardness (Shore A)

40±5

Volume decrease

<20

Temperature resistance

˚C

-20 to +80

The values specified were obtained at 23 °C and 50% relative humidity, unless otherwise specified.

Recommendation Silicone gun PENOSIL Sealant Manual Gun 310 ml.

Cleaning Use PENOSIL Premium Cleaning Wipes to clean hands and surfaces from uncured putty. Remove uncured putty with spirit or mechanically.

The surfaces must be free from fat, oil, dust and loose particles. Cut off the threaded end of the cartridge and screw on the application nozzle for directing sealant. Cut the threaded end under an angle of 45° in a way where a suitable opening for application is produced. Place the cartridge together with the applicator in the gun and fill the installation nozzle with sealant, by repeatedly pressing the gun trigger. Apply sealant in the joint by repeatedly and evenly pressing on gun trigger and smoothly dragging the nozzle continuously along the joint. After applying the sealant, smoothen it with a rubber silicone scraper. Remove excess material. In some cases, it is better to use a putty scraper. After installation, the joint should be protected against water, dirt and high mechanical stress until a permanent film will form on the surface. After full drying of the parquet layer, it can be polished with a relevant machine or manually. Before polishing, make sure that the layer is hard enough and fully dried. Do not use too coarse abrasive paper that could damage the joint. After the parquet layer has fully dried, it can be varnished with most parquet lacquers after testing the compatibility between the sealant and the varnish.

Storage Guaranteed storage time 12 months starting from the date of manufacture if stored in a closed original package in a dry place between 0 °C and +30 °C. Tested cold resistance 7 cycles at -18 °C. Avoid storage in freezing conditions.

GAP FILLERS | SEALANTS | SPECIALTY SEALANTS PENOSIL Premium bitum sealant

Plastoelastic solvent-containing sealing paste for bituminous surfaces.

■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■

Touch-dries quickly. Immediately rain and ice resistant. Suitable on bituminous materials, alkali and metals. Usable on damp surfaces. Melting temperature over 100 °C. Will not become brittle in cold. Can also be used in vertical joints. Dissolved acid, alkali, emission and weather resistant. High tensile strength.

Colour Package 310 ml cartridge, 12 cartridges in box.

Field of application

Application conditions

■■ Insulation of roof and chimney joints. ■■ Insulation of joints between bituminous plates or rolls. ■■ Repairing small leakages and open cracks on flat roofs. ■■ Patching up joint leakages between metal sheets.

■■ Product temperature during use +5 °C to +30 °C ■■ The surfaces must be clean from fat, oil, dust and loose particles. ■■ Non-porous surfaces should be cleaned with solvent and a clean, non-fluffy cotton cloth. Solvent rests should be removed before evaporating with a clean cloth..

GAP FILLERS | SEALANTS | SPECIALTY SEALANTS PENOSIL Premium bitum sealant

Technical specification PROPERTIES

UNIT

VALUE

Skin forming time

minute

10-12

Curing

mm/24 h

3-4

Curing system Density (DIN 53 479-B)

dries due to solvent vaporization g/cm³

1,02

Properties of cured sealant Hardness (Shore A) (ISO 868) Temperature resistance

22±2 ˚C

-35 to +110

The values specified were obtained at 23 °C and 50% relative humidity.

Recommendation For a 310 ml cartridge, we recommend using the PENOSIL Sealant Manual Gun 310 ml.

Cleaning Uncured sealant can be removed with PENOSIL Premium Cleaning Wipes or solvent White Spirit. Cured sealant can be removed mechanically.

SAFETY REQUIREMENTS Ensure sufficient ventilation during application. Keep out of the reach of children. Avoid contact with skin and eyes. In case of contact with eyes, rinse immediately with water and seek medical advice. Cured sealant can be handled without any danger to health.

Application instruction The surfaces must be free from fat, oil, dust and loose particles. The surface to be covered must be dry. Non-porous surfaces should be cleaned with solvent and a clean, non-fluffy cotton cloth. Solvent rests should be removed before evaporating with a clean cloth. Ensure adequate ventilation in all joint locations. During the curing process, make sure that no impurities can settle on the surface and that the joint surface is not affected by mechanical load. Do not use at temperatures below +5 °C. Cut off the threaded end of the cart ridge and screw on the application nozzle for directing sealant. Cut the threaded end in a way where a suitable opening for application is produced. Place the cartridge together with the applicator in the gun and fill the installation nozzle with sealant, by repeatedly pressing the gun trigger. Apply sealant in the joint by repeatedly and evenly pressing on gun trigger and smoothly dragging the nozzle continuously along the joint. After applying the sealant, smoothen it with a rubber silicone scraper. Remove excess sealant.

Storage Guaranteed storage time 12 months starting from the date of manufacture if stored in a closed original package in a dry place between +5 °C and +30 °C.

GAP FILLERS | SEALANTS | SPECIALTY SEALANTS PENOSIL Premium ALL WEATHER SEALANT

Solvent containing water and mould resistant sealant on synthetic rubber basis, adheres well to most materials. Allows quick repairing of openings and cracks on wet and slippery, even on slightly oily surfaces and when it is raining. ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■

Manifold usage outdoors and indoors. High elasticity. Paintable. Mould, UV and weather resistant. Silicone free (synthetic rubber basis). Treatable even after curing. Non-sagging. Transparent and invisible. Can be used at various temperatures (-5 °C to + 40 °C). Can be used on copper surfaces and in contact with bitumen. ■■ Adheres well to most materials, such as bricks, concrete, mortar, wood, metal, glass and many plastics. ■■ Adheres on wet and slightly oily surfaces, however, porous surfaces should be dry to achieve better adherence. ■■ Long storage time.

Colour Package 310 ml cartridge, 12 cartridges in box.

Field of application

Application conditions

■■ Roof repairs. ■■ Façade works. ■■ Glazing works. ■■ Expansion and connection joints.

■■ Usage temperature between -5 °C and +40 °C. ■■ Surfaces have to be cleaned from dust and loose particles. ■■ Porous surfaces should be dry and oil-free.

GAP FILLERS | SEALANTS | SPECIALTY SEALANTS PENOSIL Premium ALL WEATHER SEALANT

Technical specification PROPERTIES

UNIT

VALUE

Skin forming time

minute

15-20

Curing

mm/24 h

1-2

Curing system Density (DIN 53 479-B)

dries due to solvent vaporization g/cm³

0,95

±25

Properties of cured sealant Movement of the joint (ISO 11 6%00) Hardness (Shore A) (ISO 868) Temperature resistance

25±5 ˚C

-25 to +80

The values specified were obtained at 23 °C and 50% relative humidity.

Recommendation For a 310 ml cartridge, we recommend using the PENOSIL Sealant Manual Gun 310 ml.

Cleaning Uncured sealant can be removed with PENOSIL Premium Cleaning Wipes. Cured sealant can be removed mechanically only.

SAFETY REQUIREMENTS Ensure sufficient ventilation during application. Keep out of the reach of children. Avoid contact with skin and eyes. In case of contact with eyes, rinse immediately with water and seek medical advice. Cured sealant can be handled without any danger to health.

Application instruction Before use, keep for 24 h at room temperature. The surfaces must be cleaned from fat, oil, dust and loose particles. Cut off the threaded end of the cartridge and screw on the application nozzle for directing sealant. Cut the threaded end under an angle of 45° in a way where a suitable opening for application is produced. Place the cartridge together with the applicator in the gun and fill the installation nozzle with sealant, by repeatedly pressing the gun trigger. Apply sealant in the joint by repeatedly and evenly pressing on gun trigger and smoothly dragging the nozzle continuously along the joint. After applying the sealant, smoothen it with a rubber silicone scraper. Remove excess material. Ensure adequate ventilation in all joint locations. During the curing process, make sure that no impurities can settle on the surface and that the joint surface is not affected by mechanical load. Joints may become yellow as a results of continuous water contact, which, however, does not affect material quality. Joint edges may be taped, however, the tape should be removed immediately after finishing of the product or curing of the sealing. After drying, PENOSIL Premium All Weather's surface will be slightly sticking. Dried surface may be painted with paints and varnishes available in stores. When painting non-cured surfaces, drying of the sealant may slow down, provided that non-solvent containing paints are used.

Storage Guaranteed storage time 24 months starting from the date of manufacture if stored in a closed original package in a dry place between +5 °C and +30 °C. Even for shorter periods, the temperature must not exceed +60 °C. The product is non-freezing. Do not store near open flames or active heat source.

GAP FILLERS | SEALANTS | SPECIALTY SEALANTS PENOSIL Premium WATERSTOP SEALANT

All-purpose sealing mass on synthetic rubber basis reinforced with fibres, quickly adheres to almost all materials found at construction sites and homes, even on damp surfaces and under water. Bridges well smaller cracks. ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■

Insulates and seals even under water. Usable under all weather conditions, even in rain and snow. Immediately water proof. High-elastic – resists structure movements of up to 1 cm without tearing. Thanks to fibres, bridges even cracks and openings of several millimetres. Can be used at various temperatures (-5 to +40 °C). Adheres to most materials used in buildings, boats and trailers. Absolutely weather proof. Paintable with acrylic paints.

Colour Package 1 l metal can, 6 cans in box.

Field of application

Application conditions

■■ Roof repairs. ■■ Façade works. ■■ Sealing of rainwater systems. ■■ Sealing of chimney joints. ■■ Sealing of boats and trailers.

■■ Usage temperature between -5 °C and +40 °C. ■■ Surfaces have to be cleaned from dust and loose particles.

GAP FILLERS | SEALANTS | SPECIALTY SEALANTS PENOSIL Premium WATERSTOP SEALANT

Usage restrictions

Application instruction

■■ Do not use in contact with styrofoam. ■■ Not solvent-resistant.

Technical specification PROPERTIES

UNIT

VALUE

Skin forming time

immediately water proof

Curing system

dries due to solvent vaporization

Density (DIN 53 479-B)

g/cm³

0,95

Properties of cured sealant Temperature resistance

˚C

-25 to +100

The values specified were obtained at 23 °C and 50% relative humidity.

Cleaning Clean hands with PENOSIL Premium Cleaning Wipes. Use nitro solvent for cleaning tools. Cured sealant can be removed mechanically only.

SAFETY REQUIREMENTS Inflammable. Ensure sufficient ventilation during application. Keep out of the reach of children. Permanent exposure may cause skin dryness and cracking. Inhaling steam may cause dizziness. Do not breathe vapour. Avoid contact with skin and eyes. In case of contact with eyes, rinse immediately with water and seek medical advice.

The surfaces must be free from fat, oil, dust and loose particles. Mix well before use. Apply as a thick layer by using a brush or a spatula. In extreme conditions or for larger openings and cracks, apply a fibreglass textile on a sealed opening or crack and apply a second layer in a few days. In case of porous surfaces (e.g. concrete), primer is recommended.

Storage Guaranteed storage time 12 months starting from the date of manufacture if stored in a closed original package at room temperature. Do not store at temperatures exceeding 60 °C. Product is freezing resistant. Do not store near open flames or active heat source.

GAP FILLERS | SEALANTS | SPECIALTY SEALANTS PENOSIL Premium +1500 °C SEALANT

Silicates based sealant for high-temperature applications. ■■ ■■ ■■ ■■ ■■ ■■

Manifold application possibilities. After curing withstands temperatures of up to +1500 °C. Insulates and seals. After heating becomes very hard. Adheres to metal, stone, brick and concrete substrates. Suitable on natural stones.

Colour Package 310 ml cartridge, 12 cartridges in box.

Field of application

Application conditions

■■ Insulation and sealing works requiring heat-resistance. ■■ Insulation of joints and filling of cracks in chimneys, ovens, fireplaces and stoves.

■■ Usage temperature between +5 °C and +40 °C. ■■ After final curing needs to be heated slowly during 4 hours to 250 °C. ■■ The surfaces must be clean from fat, oil, dust and loose particles. ■■ Non-porous surfaces should be cleaned with solvent and a clean, non-fluffy cotton cloth. Solvent rests should be removed before evaporating with a clean cloth.

GAP FILLERS | SEALANTS | SPECIALTY SEALANTS PENOSIL Premium +1500 °C SEALANT

Usage restrictions

Application instruction

■■ Not suitable in moving connections. ■■ Unheated product is not water-proof. ■■ Unheated product will spread in a wide joint. ■■ Cannot be painted.

Technical specification PROPERTIES

UNIT

VALUE

Skin forming time

minute

3-4

Curing

mm/24 h

1-2

Curing system Density (DIN 53 479-B)

cures under heat (+250 °C within 4 hours) g/cm³

Hardness (Shore A) (ISO 868)

2,04 before heating 75±5

Properties of cured sealant Movement capability

Temperature resistance

˚C

up to +1500

The values specified were obtained at 23 °C and 50% relative humidity, unless otherwise specified.

Recommendation For a 310 ml cartridge, we recommend using the PENOSIL Sealant Manual Gun 310 ml.

Cleaning For uncured sealant, use a cloth dampened with water or the PENOSIL Premium Cleaning Wipes. Cured sealant can be removed mechanically only.

SAFETY REQUIREMENTS Ensure sufficient ventilation during application. Keep out of the reach of children. Avoid contact with skin and eyes. In case of contact with eyes, rinse immediately with water and seek medical advice. Cured sealant can be handled without any danger to health.

Slightly dampen very porous surfaces before application. Ensure adequate ventilation in all joint locations. During the curing process, make sure that no impurities can settle on the surface and that the joint surface is not affected by mechanical load. Do not use at temperatures below +5 °C. Cut off the threaded end of the cartridge and screw on the application nozzle for directing sealant. Cut the threaded end under an angle of 45° in a way where a suitable opening for application is produced. Place the cartridge together with the applicator in the gun and fill the installation nozzle with sealant, by repeatedly pressing the gun trigger. Apply sealant in the joint by repeatedly and evenly pressing on gun trigger and smoothly dragging the nozzle continuously along the joint. After applying the sealant, smoothen it with a rubber silicone scraper. Remove excess material. In some cases, it is better to use a putty scraper. Slowly heat to 250 °C after final curing. When heating, the sealant becomes dark grey and very hard.

Storage Guaranteed storage time 12 months starting from the date of manufacture if stored in a closed original package in a dry place between +5 °C and +30 °C, during transport for short periods at up to -5 °C. Do not store near open flames or active heat source.

GAP FILLERS | SEALANTS | SPECIALTY SEALANTS PENOSIL Premium MOTOR SEALANT

Acid-curing silicone sealant for sealing and insulation in places exposed to high temperatures up to 250 °C. Manifold usage possibilities. After curing, resistant to temperatures of up to +250 °C for up to 4 hours, for short periods even to temperatures of up to +275 °C. ■■ Insulates and seals. ■■ Maintains elasticity. ■■ Adheres well to non-porous materials with no previous treatment: metal, glass, ceramic tiles, bricks, most plastics and impregnated, varnished or painted wood. ■■ ■■

Colour Package 310 ml cartridge, 12 cartridges in box.

Field of application

Application conditions

■■ Elastic sealing of moving joints. ■■ Sealing of joints exposed to long-term temperatures of up to 250 °C (stoves and ovens). ■■ Various industrial solutions. ■■ Machine building and car repair.

■■ Usage temperature between -5 °C and +40 °C. ■■ Surfaces have to be clean and dry.

GAP FILLERS | SEALANTS | SPECIALTY SEALANTS PENOSIL Premium MOTOR SEALANT

Usage restrictions ■■ Do not use in contact with natural stones such as marble, granite, fibre cement and mortar. ■■ Do not use in contact with metals such as lead, copper, brass and zinc. ■■ Do not use in contact with pre-strained polyacrylate or polycarbonate parts. ■■ May discolour in contact with some plastics such as EPDM, APTK, and neoprene. ■■ Do not use for sealing of engine cylinder or parts continuously exposed to fuel. ■■ At temperature up to +250 °C for more than 4 hours or at temperature of more than +275 °C for short periods sealant losts it´s elasticity and becomes hard.

Technical specification PROPERTIES

UNIT

VALUE

Skin forming time

minute

10-12

Curing

mm/24 h

3-4

Curing system Density (DIN 53 479-B)

vulcanising in contact with moisture g/cm³

1,09

250

Properties of cured sealant Elongation at breaking point (ISO 8339) Hardness (Shore A) (ISO 868)

25±2

Movement capability (ISO 11 600)

±25

Temperature resistance

˚C

-40 to +250

The values specified were obtained at 23 °C and 50% relative humidity.

Recommendation For a 310 ml cartridge, we recommend using the PENOSIL Sealant Manual Gun 310 ml.

Cleaning Uncured sealant, tools and hands can be cleaned with PENOSIL Premium Cleaning Wipes. Cured sealant can be removed mechanically by using PENOSIL Premium Silicone Remover for softening the sealant.

SAFETY REQUIREMENTS Ensure sufficient ventilation during application. Keep out of the reach of children. Avoid contact with skin and eyes. In case of contact with eyes, rinse immediately with water and seek medical advice. Cured sealant can be handled without any danger to health.

Application instruction The surfaces must be cleaned from fat, oil, dust and loose particles. Nonporous surfaces should be cleaned with solvent and a clean, non-fluffy cotton cloth. Solvent rests should be removed before evaporating with a clean cloth. Slightly dampen very porous surfaces before application. Cut off the threaded end of the cartridge and screw on the application nozzle for directing sealant. Cut the threaded end under an angle of 45° in a way where a suitable opening for application is produced. Place the cartridge together with the applicator in the gun and fill the installation nozzle with sealant, by repeatedly pressing the gun trigger. Apply sealant in the joint by repeatedly and evenly pressing on gun trigger and smoothly dragging the nozzle continuously along the joint. After applying the sealant, smoothen it with a rubber silicone scraper. Remove excess material. In some cases, it is better to use a putty scraper. Ensure adequate ventilation in all joint locations. During the curing process, make sure that no impurities can settle on the surface and that the joint surface is not affected by mechanical load.

Storage Guaranteed storage time 9 months starting from the date of manufacture if stored in a closed original package in a dry place between +5 °C and +30 °C, during transport for short periods at up to -5 °C. Do not store near open flames or active heat source.

SEALANT TAPES PENOSIL PREMIUM REPAIR TAPE Elastic, self-fusing silicone tape without adhesive, which bonds with itself and is suitable for various quick repair tasks. Wraps tightly in the stretched position around the object to be insulated. The tape bonds strongly only with itself and forms a homogeneous layer. Allows for the repair of pipes, wires, hoses and other damaged surfaces around which it is possible to wrap stretched tape under pressure so that the substrate remains undamaged. Tape width 25 mm. ■ ■

■ ■ ■ ■ ■ ■ ■ ■ ■

Stretchy and elastic, suitable for all substrates and forms. Unlike traditional adhesive tapes, does not contain adhesive and does not leave adhesive residue on the surfaces. Does not smell. Tolerates extreme temperatures from -60 to +200 °C. Tolerates electrical voltage up to 8000V. Tolerates pressure up to 8 bar. Can also be used under water. Weatherproof and hermetic. Chemical proof. Does not emit chemicals, safe for the environment and the user. Easily openable / closable hanging plastic packaging.

COLOUR PACKAGE

A 3 m roll with a width of 25 mm in a hanging package.

FIELD OF APPLICATION

APPLICATION CONDITIONS

■ Temporary repair of pipes and hoses, stoppage of leaks. ■ Electrical insulation work, repair and insulation of cables, wires and seals. ■ Sealing connections and fittings, ensuring water resistance, stiffening. ■ Strengthening the handles and grips of tools and sports equipment, improving ergonomics and slip resistance. ■ Wrapping rope ends, marking lines and circuits, binding wires together. ■ Protects against corrosion, acids, oil, seawater, road salt and UV radiation.

■ Operating temperature from +5 to +40 ºC. ■ Surfaces must be free of dust, loose particles and oil.

FAST § STRONG § FLEXIBLE

SEALANT TAPES PENOSIL PREMIUM REPAIR TAPE APPLICATION INSTRUCTION

TECHNICAL SPECIFICATION PROPERTY

UNIT

VALUE

Hardness Shore A

ASTM D2148

Tensile strength, min.

ASTM D119

700 PSI

Elongation, min.

ASTM D119

300%

Tear strength, min.

ASTM D624, Die B

85 ppi

Bond strength, min.

MIL-I-46852

2 lbs

Water absorption, max.

MIL-I-46852

3% by weight

Dielectric strength, min.

MIL-I-46852

400 v/mil,

Temperature resistance

°C

-60 to +200

Cold brittle point

°C

-65

The values specified have been measured at temperature +23 °C and 50% relative humidity.

CLEANING As silicone tape does not adhere to surfaces, it can be removed by cutting so that no residue is left on the substrate.

SAFETY REQUIREMENTS

Self-fusing tape is wrapped around the desired area with overlap. To ensure a good bond, tape should be stretched to at least double its original length. For highpressure leaks, tape should be stretched to the maximum length. The tighter the tape is wrapped, the quicker and stronger the bond. Continue wrapping tape around project and overlap it so that half the width is covered with the next wrap. The first and last wrap should completely overlap the previous wrap for a complete bond. Self-adhesive tape works on either side. Most hoses can be repaired with 3-5 layers, if wrapped 7 to 13 cm in each direction from the leak. The tape can only be repositioned in the first few seconds after wrapping. Attempting to reposition it after 1 minute or longer is not recommended. Tape is not reusable. It is possible to use more tape later. Getting dirt or oil between the layers should be avoided, as this will interfere with bonding. Self-fusing tape can be cut with a utility knife or scissors.

7 cm

Keep out of the reach of children.

STORAGE Tape should be stored in a cool and dry place, away from contact with heat sources and direct sunlight. Storage time 2 years.

GAP FILLING │ SEALANT TAPES PENOSIL PREMIUM EXPANDING TAPE 600

Self expanding joint sealant tape from open-cellular polyurethane foam, impregnated with modified acrylic dispersion, containing flame retarding fillings. It is especially designed as an external weather seal for facade joints and window frame joints directly exposed to very demanding weather conditions in buildings up to 100m height. The tape is on one side provided with a strong self-adhesive acrylic tape. ■■ Slowly expands when released from the roll. ■■ Expands and fills out all cracks and uneven parts

of the joint.

■■ Leaves a completely homogenous tight seal. ■■ Impermeable to driving rain ≥ 600 Pa (equivalent to violent

storm.)

■■ Airtight against wind and dust, minimizes the risk of wet-rot

and fungal infection of the building system.

■■ The open cell structure allows breathability of joints and ■■ ■■ ■■ ■■ ■■ ■■

evaporation of moisture. Remains elastic and moves with the joint. Compatible with most building materials. BG1 certified according to DIN 18542. EC1 plus – very low emission. Building material class B1 – hardly flammable material. Safe for user and the environment.

Colour

Application conditions ■■ The ideal mounting temperature is between

Packaging and product measurements

+5 °C and +30 °C

■■ The joint surfaces must be clean, dry and right-angled.

■■ Can be painted over with standard emulsion

Tape rolls packaged in cardboard boxes. Other dimensions available on request.

paints. However, this is not necessary since the tape itself is suitable as external finishing.

Tape width

Joint width

Roll length

Rolls in box Quantity in box

10 mm

2-3 mm

12,5 m

30 rolls

375 m

10 mm

3-5 mm

10 m

30 rolls

300 m

15 mm

3-5 mm

10 m

20 rolls

200 m

15 mm

4-7 mm

20 rolls

160 m

20 mm

4-7 mm

15 rolls

120 m

15 mm

6-10 mm

5,6 m

20 rolls

112 m

20 mm

6-10 mm

5,6 m

15 rolls

84 m

20 mm

8-12 mm

4,3 m

15 rolls

64,5 m

25 mm

8-12 mm

4,3 m

12 rolls

51,6 m

25 mm

10-15 mm

3,3 m

12 rolls

39,6 m

30 mm

10-15 mm

3,3 m

10 rolls

33 m

30 mm

12-20 mm

3,3 m

10 rolls

33 m

40 mm

12-20 mm

3,3 m

7 rolls

23,1 m

Field of application ■■ Sealing gaps between window/door frame and embrasure. ■■ Sealing between concrete sections. ■■ Sealing roof-lights. ■■ Sealing roof constructions, including eaves fillers. ■■ Sealing and insulating timber and log houses. ■■ Soundproofing internal and partition wall joints. ■■ Insulation against noise and vibrations in connection with ventilation and climate installations.

GAP FILLING │ SEALANT TAPES PENOSIL PREMIUM EXPANDING TAPE 600 Application Instruction

Technical Specification Property

Unit

DIN 18542 classification

Value BG1

Tightness of joints against driving rain Δp (DIN EN1027)

≥ 600

Tightness against rain of joint intersections ∆p (DIN EN1027)

≥ 600

Air permeability (DIN EN 42)

m³/(h*m*(daPa)²ʹ³)

<= 1,0

UV resistance (DIN 18542)

requirements fulfilled

Compatibility with adjacent construction materials (DIN 18542)

°C

up to +80

Thermal conductivity, λ (DIN EN 12667)

W/mK

0,043

Vapour diffusion thickness (DIN EN ISO 12572), Sd

≤ 0,5

Choose the appropriate tape according to width of the joint. Then choose the width of the tape according to depth of the joint. Make sure that the joint is clean and dry. The first and last 3-5 cm of the roll to be discarded. Cut off the joint sealant tape with an excess length of approx. 3%. Remove the release liner and fix the joint sealant tape to the most suitable surface, for visual purposes, approx. 2-3 mm behind the front edge of the joint. If necessary, use a putty knife to fix the sealant tape firmly. The dimensioning of the joint sealant tape shall be in accordance with the table (see Packaging). Possible movements of the construction should be taken into consideration. All product properties are guaranteed only to correctly applicated compressed sealant tapes.

Vapour diffusion resistance factor (DIN EN ISO 12572), µ

≤ 100

Cleaning

Reaction to fire class (DIN 4102)

For cleaning hands and surfaces use PENOSIL Premium Cleaning Wipes.

Temperature resistance (DIN 18542)

°C

-30… +90

Compatibility with adjacent construction materials (DIN 18542)

°C

up to +80

Application height from the ground

up to 100

For window installation use the Expanding Tape in combination with PENOSIL GoldGun LowExpansion insulation foam.

+3 %

Technical data applies to correctly applicated compressed sealant tapes.

Recommendation

3-5 cm

Precaution

Storage

■■ The joint sealant tape must never be mounted around corners but must instead be cut

Guaranteed shelf life is 18 months from the manufacturing date when stored in a cool and dry place in original packaging at temperatures between +1 °C and +20 °C.

and pushed together right-angled. The excess lengths are pressed well into the corners. ■■ When making joint sealant tape extensions the ends must be pushed together. Avoid overlapping joint sealant tapes. ■■ Never clean with high pressure or strongly acidic fluids.

GAP FILLING │ SEALANT TAPES PENOSIL PREMIUM EXPANDING TAPE 300

Self expanding joint sealant tape from open-cellular polyurethane foam, impregnated with modified acrylic dispersion, containing flame retarding fillings. The tape is on one side provided with a strong self-adhesive acrylic tape. Provides good thermal and sound insulation. Premium Expanding Tape 300 is designed to provide weather protection and insulation in external joints that are mostly covered. ■■ Slowly expands when released from the roll. ■■ Expands and fills out all cracks and uneven parts

of the joint.

■■ Leaves a completely homogenous tight seal. ■■ Protects the joint against dust, wind and driving rain

of up to 300 Pa.

■■ Minimizes the risk of wet-rot and fungal infection

of the building system.

■■ The open cell structure allows breathability of joints ■■ ■■ ■■ ■■ ■■ ■■ ■■

and evaporation of moisture. Remains elastic and moves with the joint. Provides thermal and sound insulation. Reaction to fire class B2. Compatible with most building materials. Safe for user and the environment. Fast and easy to install. High temperature resistance.

Colour

Packaging and product measurements Tape width

Joint width

Roll length

10 mm

2-3 mm

12,5 m

15 mm

2-3 mm

12,5 m

10 mm

3-5 mm

10 m

15 mm

3-5 mm

10 m

15 mm

4-7 mm

20 mm

4-7 mm

Application conditions

15 mm

6-10 mm

5,6 m

■■ The ideal mounting temperature is between +5 °C and +30 °C ■■ The joint surfaces must be clean, dry and right-angled.

20 mm

6-10 mm

5,6 m

Other dimensions available on request.

GAP FILLING │ SEALANT TAPES PENOSIL PREMIUM EXPANDING TAPE 300 Application Instruction

Technical Specification Property

Unit

Value

Tensile strength

kPa

155

Elongation

170

Resistance to pressure

kPa

4-5

Reaction to fire class (DIN 4102)

Tightness of joints against driving rain Δp

≥300

Air permeability (DIN 18542, EN 12114)

m³ /(h*m*(daPa)²ʹ³)

<= 1,0

Temperature resistance

°C

-40… +90

Sound insulation

Application height from the ground

up to 20

Technical data applies to correctly applicated compressed sealant tapes.

Cleaning For cleaning hands and surfaces use PENOSIL Premium Cleaning Wipes.

Recommendation

+3 %

For window installation use the Expanding Tape in combination with PENOSIL GoldGun LowExpansion insulation foam.

3-5 cm

Precaution

Storage

■■ The joint sealant tape must never be mounted around corners but must instead be cut

Guaranteed shelf life is 12 months from the manufacturing date when stored in a cool and dry place in original packaging at temperatures between +1 °C and +30 °C.

GAP FILLING │ SEALANT TAPES PENOSIL PREMIUM BACKER ROD PE

A round backer rod from closed cell polyethylene foam to adjust the depth of the joint and to avoid trilateral bonding of the sealant.

The backer rod is very elastic, compressible and easy to install. ■ The closed cell structure prevents moisture and air absorption. ■ Suitable for use with polyurethane, hybrid sealants, silicone and other common sealants. ■ Does not emit chemicals, safe for the user and the environment. ■

COLOUR

PACKAGE Diameter

Meters in the box

Ø6 mm

1500

Ø10 mm

550

Ø20 mm

150

Ø25 mm

200

Ø30 mm

160

Ø40 mm

270

FIELD OF APPLICATION

APPLICATION CONDITIONS

■ ■ ■ ■ ■

■ The selected backer rod should be approx. 25% larger in diameter than the joint width to ensure that the backer rod is in a compressed state in the joint. ■ The joint to be sealed must be dry and free of dust, loose particles and oil. ■ Excessive stretching and compression of the joint must be avoided during installation.

Expansion and control joints of facades and floors. Joints of concrete panels. Perimeters of window and door frames. Joints between wall and bathtub or sink. Also suitable for temporary joint filling.

GAP FILLING │ SEALANT TAPES PENOSIL PREMIUM BACKER ROD PE

USAGE RESTRICTIONS If it is necessary to prime the edges of the joint, this must be done before installing the backer rod.

TECHNICAL SPECIFICATION Property

Unit

Value

Density

kg/m³

22±6

Reaction to fire (EN 13501-1) Temperature resistance

E °C

-40 to +90

SAFETY REQUIREMENTS According to Regulation (EC) No 1907/2006 of the European Parliament and of the Council on the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH), a backer rod is a product which is not expected to release chemicals. A Product Safety Data Sheet is not required. Polyethylene foam may collect electrostatic charges, which may cause electrical shocks. Temperatures above +250ºC may cause the material to decompose. Contact with ignition and/or heat sources may cause an explosion. Keep out of the reach of children.

APPLICATION INSTRUCTIONS The backer rod should be approx. 25% larger in diameter than the joint width to ensure that the backer rod is in a compressed state when installed in the joint. The backer rod is installed in the joint so that it gives proper depth and shape to the joint sealant and helps to prevent trilateral bonding. During installation, ensure that the backer rod does not become damaged. If the backer rod needs to be continued, press the rod ends tightly against each other, avoiding overlap of the rods.

STORAGE Backer Rod PE should be stored in a cool, dry place, away from contact with heat sources and direct sunlight.

ADHESIVES │ CONSTRUCTION ADHESIVES PENOSIL PREMIUM SPEEDFIX HIGH TACK 707

General-purpose, hybrid-polymer-based adhesive with extra strong and quick initial adhesion. With high viscosity, suitable for indoors and outdoors applications, where especially strong adhesive bonding is required. ■ Excellent initial tack. ■ Adheres well to most construction materials such as ■ ■ ■ ■ ■ ■ ■

wood, bricks, concrete, glass, various, metals. Can be used on wet surfaces. Suitable for gluing indoors and outdoors. Does not cause corrosion risk on metals. Dries fast without shrinking. Very good vibration and boise-suppressing properties. Excellent UV, weather and ageing resistance. Silicone, isocyanate and solvent-free.

COLOUR

PACKAGE ■ 290 ml plastic package, 12 pcs per box ■ 600 ml foil package, 20 pcs per box

FIELD OF APPLICATION

APPLICATION CONDITIONS

■ For gluing metal, stone and wooden structures during general construction work where an especially strong and secure connection is required. ■ Gluing work in construction, metal industry and engineering requiring fast and strong adhesion. ■ Gluing work in which case in addition to strong bonding, also vibration and noise-suppressing properties of the adhesive are required. ■ Gluing interior and exterior panels are boards in construction, as well as caravans, camping caravans and big trucks.

■ Application temperature range: from +5 °C to +40 °C. ■ Surfaces to be finished must be free from dirt, dust, loose particles and oil.

ADHESIVES │ CONSTRUCTION ADHESIVES PENOSIL PREMIUM SPEEDFIX HIGH TACK 707

USAGE RESTRICTIONS ■ Does not suit for glazing and concrete surfaces and surfaces that may emit oil, plasticisers or solvents (rubber, chloroprene, EPDM, etc.). ■ Does not adhere to some plastics such as PE, PP and PTFE, known as Teflon surfaces. ■ Not suitable for sealing aquariums and underwater joints. ■ In case of natural stone, testing must be performed before use.

Technical specification PROPERTY

Unit

Value

Working time

minute

5-10

Curing rate

mm/24 h 2,5-3

Curing system Density (DIN 53479)

cures due to air humidity g/cm³

1,55

Properties of cured adhesive Hardness (Shore A)

Shear strenght (WGM214)

kg/cm²

Tensile strenght (WGM214)

kg/cm²

Elongation at break (ISO 37)

>250

Temperature resistance

˚C

-40 to +90

The above parameters have been measured under the following conditions: temperature +23 °C and 50% relative humidity.

RECOMMENDATION PENOSIL Cartridge Gun.

CLEANING ■ To remove adhesive that is not yet cured you can use PENOSIL Premium Cleaning Wipes or an organic solvent, for example petroleum spirits (White Spirit) or acetone. ■ Cured adhesive can be removed mechanically.

SAFETY REQUIREMENTS Sufficient ventilation must be provided during use of the product. Avoid contact with skin and eyes. If the product gets into your eyes, immediately rinse them with plenty of water and see a doctor. Highly flammable, store apart from ignition sources and open fire. Do not smoke near the product. Keep out of the reach of children

APPLICATION INSTRUCTION The surfaces to be bonded must be free of grease, oil, dust, and loose particles. Test the adhesion of the adhesive on the substrate before use in order to make sure that the product is suitable for the intended purpose. Cut off the threaded end of the cartridge and screw on the installation nozzle to direct the flow of the adhesive. Cut the nozzle so that the hole is sufficient for application of the necessary amount of adhesive. Place the cartridge with the nozzle into the gun and pump the adhesive mass into the nozzle by repeatedly pressing the gun trigger. For gluing, the surface to be connected should be covered with the adhesive and then pressed together with the substrate. Heavier parts must be supported for at least 2 hours, preferably until the mass has completely cured (curing speed 2,5-3 mm/24 h).

STORAGE Guaranteed storage time is 12 months from the manufacturing date, provided the product is stored in the original hermetically sealed package in a dry place and at temperatures between +5 °C and +25 °C

adhesives │ construction adhesives PENOSIL Premium SpeedFix All Interior 697

Acrylate dispersion based adhesive with excellent initial adhesion. Suitable for quick, strong gluing for almost any type of interior work. Perfect for fast connection of various materials such as wood, unpolished stones, concrete, plasterboard, ceramics, various types of bricks and polystyrene. Wide range of applications, excellent adhesion to most building materials. ■■ Adhesive strength 11 kg/cm². ■■ UV and moisture resistant. ■■ Does not contain harmful ingredients. ■■

Colour Package 290 ml plastic cartridge, 12 pcs per box.

Field of application

Application conditions

■■ General construction work such as the installation of wooden parts as well as reinforcing screw fastenings and reducing the number of screws for installation of construction boards. ■■ Installation of door mouldings and skirting boards. ■■ Installation of decorative elements and cornices.

■■ Application temperature between +5 °C and +30 °C. ■■ Surfaces must be free from dirt, dust, loose particles and oil. ■■ Sufficient ventilation is required to release moisture during curing.

adhesives │ construction adhesives PENOSIL Premium SpeedFix All Interior 697

Usage restrictions ■■ Not suitable for underwater work or on surfaces in constant contact with water. ■■ Pre-test required for natural stone.

Technical specification Property

Unit

Value

Working time

minute

3-5

Skin-forming time

minute

Final curing

mm/24 h 2-3

Curing system Density

drying g/cm³

1,3

Shear strength (WGM214)

kg/cm²

Tensile strength (WGM214)

kg/cm²

Temperature resistance

˚C

-30 to +70

Properties of cured adhesive

The parameters indicated have been measured at temperature +23 °C and 50% relative air humidity.

Recommendation PENOSIL Cartridge Gun.

Cleaning ■■ Clean the uncured adhesive with water or with PENOSIL Premium Cleaning Wipes. ■■ Cured adhesive can be removed mechanically.

Safety requirements Sufficient ventilation must be provided during use of the product. Avoid contact with skin and eyes. If the product gets into your eyes, immediately rinse them with plenty of water and see a doctor. Keep out of the reach of children.

Application instruction The surfaces to be bonded must be free of grease, oil, dust, and loose particles. Before bonding, it is recommended to test the adhesion ability of the adhesive to the surface to determine the product’s suitability for this application. Cut open the threaded end of the cartridge and screw on the installation nozzle to direct the flow of the adhesive. Cut the nozzle so that the hole is sufficient for application of the necessary amount of adhesive. Place the cartridge with the nozzle into the gun and pump the adhesive mass into the nozzle by repeatedly pressing the gun trigger. Apply the adhesive mass to the surface and press immediately to the base surface. Mounted parts require a support for at least 2-3 hours, heavier and hanging parts until the final curing of the glue. The final adhesion of the adhesive depends on the thickness of the adhesive, the materials to be glued and the ambient humidity. One of the glued surfaces should be water vapor permeable to allow the adhesive to dry. After final curing the glue canbe overprinted with acrylic paint.

Storage The guaranteed shelf-life is 12 months starting from the date of manufacturing if stored in the hermetically sealed original package in a dry place between +5 °C and +30 °C. Prevent freezing.

adhesives │ construction adhesives PENOSIL Premium SpeedFix All Exterior 777

Hybrid polymer based general-purpose glue for fast, strong bonding with very good primary adhesion. Used for gluing metal, stone and wood components during general construction work. Well suited for outdoor use and in different weather conditions. ■■

■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■

Excellent bonding capacity with most construction materials such as wood, bricks, concrete, glass and various metals. Also appropriate for use on moist surfaces. Appropriate for bonding in interior and exterior conditions. Does not cause corrosion on metals. Does not shrink during drying. Good antivibration and noise suppressive properties. UV and weather resistant. Can be painted over. Does not contain harmful ingredients.

Colour Package 290 ml plastic cartridge, 12 pcs per box.

Field of application

Application conditions

■■ Gluing of metal, stone and wood components during general construction work, where a particularly fast primary bond and a strong connection are required. ■■ Outdoor bonding work with fast bonding requirement. ■■ Adhesive work where the anti-vibration and noise suppressing properties of the glue are required in addition to strong adhesion.

■■ Application temperature between +5 °C and +40 °C. ■■ Surfaces must be free from dirt, dust, loose particles and oil.

adhesives │ construction adhesives PENOSIL Premium SpeedFix All Exterior 777 Usage restrictions ■■ Not suitable for sealing aquariums or underwater joints. ■■ Not suitable for use with natural stone.

Technical specification Property

Unit

Value

Skin-forming time

minute

Final curing

mm/24 h 3

Curing system Density (DIN 53479)

cures due to air humidity g/cm³

1,55±0,05

Properties of cured adhesive Hardness (Shore A)

60±5

Shear strength (WGM214)

kg/cm²

Tensile strength (WGM214)

kg/cm²

Modulus at 100% elongation (ISO 37)

N/mm²

2,8

Elongation at break (ISO 37)

150±10

Temperature resistance

˚C

-40 to +80

The above parameters have been measured under the following conditions: temperature +23 °C and 50% relative humidity.

Application instruction The surfaces to be bonded must be free of grease, oil, dust, and loose particles. Before bonding, it is recommended to test the adhesion ability of the adhesive to the surface to determine the product’s suitability for this application. Cut open the threaded end of the cartridge and screw on the installation nozzle to direct the flow of the adhesive. Cut the nozzle so that the hole is sufficient for application of the necessary amount of adhesive. Place the cartridge with the nozzle into the gun and pump the adhesive mass into the nozzle by repeatedly pressing the gun trigger. Apply the adhesive mass to the surface and press immediately to the base surface. Mounted components require support for at least 2 hours, sensitive parts up to final curing (curing rate 3 mm/24 h). To achieve a clear joint, use masking tape before applying the glue. Remove the tape before the adhesive cures completely. The curing rate depends on the temperature and humidity of the environment. Avoid mechanical, chemical and thermal stress before final curing.

Recommendation PENOSIL Cartridge Gun.

Cleaning ■■ Clean the uncured adhesive with PENOSIL Premium Cleaning Wipes or use an organic solvent, for example petroleum spirits or acetone. ■■ Cured adhesive can be removed mechanically.

Storage Guaranteed shelf-life is 12 months starting from the date of manufacturing if stored in the hermetically sealed original package in a dry place between +5 °C and +30 °C. Prevent freezing.

ADHESIVES │ CONSTRUCTION ADHESIVES PENOSIL PREMIUM SPEEDFIX UNIVERSAL 907

High-quality synthetic rubber-based adhesive with extra strong and instant adhesion for general construction purposes. Suits well for installing wooden boards, plasterboards and decorative panels inside and outside. When the solvent evaporates, the adhesive cures and forms a firm and long-lasting connection. For gluing and filling the most different materials simply and quickly. ■ Ultra fast adhesion. ■ Very strong bond. ■ Excellent adhesion to most construction materials,

including wood, fibreboard, stone, concrete, plasterboard, polyurethane and ceramic tiles. ■ For any adhesion work inside and outside. ■ Can be used at low temperatures.

COLOUR PACKAGE 310 ml plastic cartridge, 12 pcs per box.

FIELD OF APPLICATION

APPLICATION CONDITIONS

■ Strengthening of screw attachments and reduction of screw quantities in the course of installation of wooden structural elements, wooden boards and plasterboards and decorative panels. ■ Attachment of door and floor battens and woodfibre and ceramic boards. ■ Sufficient ventilation must be provided in the course of curing.

■ Application temperature range: from -10 °C to +40 °C. ■ Surfaces must be free from dust, loose particles and oil. ■ Sufficient ventilation must be provided in the course of curing.

ADHESIVES │ CONSTRUCTION ADHESIVES PENOSIL PREMIUM SPEEDFIX UNIVERSAL 907

USAGE RESTRICTIONS ■ The adhesive connects parts rigidly and therefore it is unsuitable for moving joints. ■ Not suited for the use on surfaces that are in constant contact with water. ■ Curing may take longer if both adhesive-covered surfaces are non-porous. ■ Not compatible with polyethylene, polypropylene and expanded polystyrene. ■ In case of unknown materials it is recommended to test adhesion prior to application.

Technical specification PROPERTY

Unit

Value

Working time

minute

max. 5

Final curing

hour

24-48

Curing system Density (DIN 53 479-B)

drying as the solvent evaporates g/cm³

1,25 ± 0,02

Shear strength (WGM214)

kg/cm²

Tensile strength (WGM214)

kg/cm²

Temperature resistance

˚C

-20 to +80

Properties of cured adhesive

The above parameters have been measured under the following conditions: temperature +23 °C and 50% relative humidity.

RECOMMENDATION PENOSIL Cartridge Gun.

CLEANING ■ To remove adhesive that is not yet dry you can use PENOSIL Premium Cleaning Wipes or an organic solvent, for example petroleum spirits (White Spirit) or acetone. ■ Cured adhesive can be removed mechanically.

SAFETY REQUIREMENTS Sufficient ventilation must be provided during use of the product. Keep out of the reach of children. Avoid contact with skin and eyes. If the product gets into your eyes, immediately rinse them with plenty of water and see a doctor. Highly flammable: store apart from ignition sources and open fire. Do not smoke near the product.

APPLICATION INSTRUCTION The surfaces to be bonded must be free of grease, oil, dust, and loose particles. Cut open the threaded end of the cartridge and screw on the installation nozzle to direct the flow of the adhesive. Cut the nozzle so that the hole is sufficient for application of the necessary amount of adhesive. Place the cartridge with the nozzle into the gun and pump the adhesive mass into the nozzle by repeatedly pressing the gun trigger. If you are dealing with a clean installation joint, apply painter’s tape before putting the element in place. Remove the tape before the adhesive dries completely. SpeedFix Universal 907 adhesive can be used as a contact adhesive or a single-side wet adhesive. Single-side wet bonding Apply the adhesive to one of the surfaces to be bonded and immediately press the surfaces together firmly to achieve the best result. In case of heavier materials supporting is needed. Contact bonding Apply the adhesive to one of the surfaces to be bonded, press the surfaces together firmly and then immediately separate them. Keep the surfaces separated for 3-5 minutes and then press them together again to complete the bonding process. The surfaces must be pressed together firmly and supported to ensure maximum contact. They should remain mechanically supported for at least 24 hours, but the recommended duration is until the adhesive becomes completely dry. Avoid any thermal, mechanical or chemical impact before the adhesive cures completely.

STORAGE Guaranteed storage time is 12 months from the manufacturing date, provided the product is stored in a hermetically closed original package in dry place protected from direct sunshine, where the temperature remains in the range from +5 °C to +35 °C.

adhesives │ construction adhesives PENOSIL Premium SpeedFix Hybrid Crystal 799

Multi-purpose hybrid polymer-based extra strong transparent adhesive for bonding and sealing different materials. ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■

Suitable for most substrates, including wet surfaces. Appropriate for bonding in interior and exterior conditions. Does not cause corrosion on metals. Very easy to use and finish. Forms permanently elastic adhesion after curing. Good anti-vibration and noise suppressive properties. UV and weather resistant. Does not shrink during curing. Does not contain harmful ingredients. Moderately resistant to chemicals such as aromatic solvents and concentrated acids.

Colour Package 290 ml plastic cartridge, 12 pcs per box.

Field of application

Application conditions

■■ Bonding glass, mirrors and decorative elements in areas where a transparent adhesive is required. ■■ Bonding and sealing jobs where permanent elasticity of an adhesive is required. ■■ Adhesive work where the anti-vibration and noise suppressing properties of the glue are required in addition to strong adhesion. ■■ Bonding strips, mirrors, glass, ceiling and wall decorations. ■■ Fastening boxes and junction boxes related to electricity work. ■■ Filling cracks and gaps at construction sites.

■■ Application temperature range: from +5 °C to +40 °C. ■■ Surfaces must be free from dirt, dust, loose particles and oil.

adhesives │ construction adhesives PENOSIL Premium SpeedFix Hybrid Crystal 799

Usage restrictions ■■ Not suitable for sealing aquariums or underwater joints. ■■ Not suitable for surfaces made of natural stone. ■■ Does not adhere to silicone and bitumen surfaces and some plastics such as PE, PP and PTFE, also known as Teflon coatings. ■■ Compatibility of paint and adhesive must be tested.

Technical specification Property

Unit

Value

Skin forming time

minute

10-15

Definitive setting

mm/24 h 2

Curing system Density (DIN 53479)

cures due to air humidity g/cm³

1,05

Properties of cured adhesive Hardness (Shore A) (DIN 53505)

Shear strength (WGM214)

kg/cm²

Tensile strength (WGM214)

kg/cm²

Elongation at break (ISO 37)

N/mm²

2,5

Modulus at 100% elongation (ISO 37)

N/mm²

Elongation at break (ISO 37)

270

Temperature resistance

˚C

-40 to +80

The parameters indicated have been measured at temperature +23 °C and 50% relative air humidity.

Recommendation PENOSIL Cartridge Gun.

Cleaning ■■ Clean the uncured adhesive sealant with PENOSIL Premium Cleaning Wipes or use an organic solvent, for example petroleum spirits or acetone. ■■ Cured adhesive sealant can be removed mechanically.

Application instruction The surfaces to be bonded must be free of grease, oil, dust, and loose particles. Before bonding, it is recommended to test the adhesion ability of the adhesive to the surface to determine the product’s suitability for this application. Cut open the threaded end of the cartridge and screw on the installation nozzle to direct the flow of the adhesive. Cut the nozzle so that the hole is sufficient for application of the necessary amount of adhesive. Place the cartridge with the nozzle into the gun and pump the adhesive sealant mass into the nozzle by repeatedly pressing the gun trigger. Apply adhesive on the surfaces, press them immediately together and support for at least 2 hours. Critical connections and heavier elements require support until the adhesive has completely cured (curing rate 2 mm/24 h). For sealing apply the multi-purpose adhesive in the joint and smooth with a finger dipped in soapy water or with a rubber silicone spatula before a film is formed. To achieve a clean and straight edge when sealing or bonding in the areas, where the edge of the adhesive sealant remains visible, it is recommended to apply masking tape on the surface, at the edge of the element and to smooth the edge of the adhesive with a spatula. The tape should be removed immediately after the element to be bonded has been placed, before the adhesive has dried.

Storage Guaranteed storage time is 12 months from the manufacturing date, provided the product is stored in the original hermetically sealed package in a dry place and at temperatures between +5 °C and +30 °C.

adhesives │ construction adhesives PENOSIL Premium SpeedFix Clear 909

A solvent-based transparent adhesive with extra fast and immediate powerful grab for invisible bonding and sealing. A perfect flexible adhesive for various bonding applications in construction projects. ■■

■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■

Excellent ultra strong adhesion to most substrates such as wood, concrete, ceramics, brick, plaster, stone, steel, aluminium, rigid PVC, glass, polyester. Does not require priming. Suits well for bonding in interior and exterior conditions. UV and weather-resistant. Resistant to temperature fluctuations and water. Does not cause corrosion on metals. Does not shrink during curing. Does not contain harmful ingredients. Also suitable for re-painting.

Colour Package 290 ml plastic cartridge, 12 pcs per box.

Field of application

Application conditions

■■ Bonding glass, Plexiglas and decorative elements in areas where a transparent adhesive is required. ■■ Bonding projects, where adhesive must remain invisible: strips, profiles, boundaries and frames. ■■ Fastening and sealing glazing profiles of greenhouses, garden houses, terraces, etc. ■■ Bonding numbers and mailboxes to buildings.

■■ Usage temperature between +5 °C and +30 °C. ■■ Surfaces must be free from dirt, dust, loose particles, water and oil. ■■ Sufficient ventilation must be provided during use of the product.

adhesives │ construction adhesives PENOSIL Premium SpeedFix Clear 909 Usage restrictions ■■ Not suitable for sealing aquariums and underwater joints. ■■ Test before using on natural stone. ■■ Not compatible with polyethylene, polypropylene and expanded polystyrene. ■■ Before using on unknown materials, a bonding test is recommended.

Technical specification Property

Unit

Value

Working time

minute

10-15

Definitive setting

hour

24-72

Curing system

drying as the solvent evaporates

Density

g/m³

0,90±0,05

Solids content

61±3

Shear strength (WGM214)

kg/cm²

Tensile strength (WGM214)

kg/cm²

Temperature resistance

˚C

-20 to +60

Properties of cured adhesive

The parameters indicated have been measured at temperature +23 °C and 50% relative air humidity.

Recommendation PENOSIL Cartridge Gun.

Storage Guaranteed storage time is 18 months from production date, stored in closed moisture resistant original package in dry place protected from direct sunlight at temperatures between +5 °C and +30 °C.

Safety requirements Highly flammable: store apart from ignition sources and open fire. Do not smoke near the product. Sufficient ventilation must be provided during use of the product. Avoid contact with skin and eyes. If the product gets into your eyes, immediately rinse them with plenty of water and see a doctor. Keep out of the reach of children.

Application instruction The surfaces to be bonded must be free of grease, oil, dust, and loose particles. To achieve this, clean with organic solvents (alcohol or MEK) until the dirt is totally removed. Do not use soap, detergents or water. Before bonding, it is recommended to test the adhesion ability of the adhesive to the surface to determine the product’s suitability for this application. Cut open the threaded end of the cartridge and screw on the installation nozzle to direct the flow of the adhesive. Cut the nozzle so that the hole is sufficient for application of the necessary amount of adhesive. Place the cartridge with the nozzle into the gun and pump the adhesive mass into the nozzle by repeatedly pressing the gun trigger. Adhesive must be applied on the surface in dots or stripes. Adhesive may be used as a contact adhesive or one-way wet adhesive (recommended in case of heavier materials or surfaces under pressure). Immediate grab. One-way contact: Apply the adhesive to one of the surfaces to be bonded and to achieve the best result press the surfaces immediately firmly together. A mechanical support has to be installed for minimum 24 hours, preferably until the adhesive has completely cured. Avoid any thermal, mechanical or chemical impact before the adhesive has completely cured. Two-way contact: Apply the adhesive on one of the surfaces to be bonded, press the surfaces to be bonded firmly together and thereat part from one another. Keep the surfaces separated for 3-5 minutes depending on the room conditions and thereat press firmly together. To achieve maximum contact the surfaces must be firmly pressed together and supported. A mechanical support has to be installed for minimum 24 hours, preferably until the adhesive has completely cured. Avoid any thermal, mechanical or chemical impact before the adhesive has completely cured. At least one of the surfaces must be porous to ensure evaporation of the solvent. To achieve a clean and straight edge when sealing or bonding in the areas, where the edge of the adhesive remains visible, it is recommended to apply masking tape on the surface, at the edge of the element and to smooth the edge of the adhesive with a spatula. The tape should be removed immediately after the element to be bonded has been placed, before the adhesive has dried.

adhesives │ construction adhesives PENOSIL premium SpeedFix Mirror 936

High-quality synthetic rubber-based adhesive with firm and rapid adhesion for installation of mirrors and stained glass. Adhesion is achieved within 20 seconds and there is no sagging on vertical surfaces, but heavier mirrors being bonded need supporting until the adhesive dries. ■■ Excellent adhesion to most building materials, including concrete, wood, glass, plasterboard, woodchip and woodfibre boards, bricks, aluminium, galvanised iron and steel. ■■ When the solvent evaporates, the adhesive cures and forms a firm and long-lasting connection. ■■

Colour

Packaging 310 ml plastic cartridge, 12 cartridges per box

Field of application

Application conditions

■■ Mirror and stained glass installation. ■■ Bonding of decorative elements indoors. ■■ Glue for hobbyists making decorations.

■■ Usage temperature between -20 °C and +38 °C. ■■ Surfaces must be free from dust, loose particles and oil. ■■ Good ventilation is required during curing.

adhesives │ construction adhesives PENOSIL premium SpeedFix Mirror 936 Usage restrictions ■■ The adhesive connects parts rigidly and therefore it is unsuitable for moving joints. ■■ Not suitable on surfaces in permanent contact with water. ■■ Curing may take longer if both adhesive-covered surfaces are non-porous.

Technical specification Property

Unit

Value

Working time

minute

0-5

Final curing

hour

24-48

Curing system Density (DIN 53 479-B)

drying as the solvent evaporates g/cm³

1,25

Shear strenght (WGM214)

kg/cm²

Tensile strenght (WGM214)

kg/cm²

Temperature resistance

˚C

-20 to +60

Properties of cured adhesive

The parameters indicated have been measured at temperature +23 °C and 50% relative air humidity.

Recommendation PENOSIL Cartridge Gun.

Cleaning ■■ Use PENOSIL Premium Cleaning Wipes or an organic solvent, for example petroleum spirits or acetone, to remove uncured adhesive. ■■ Cured adhesive can be removed mechanically.

Safety requirements Ensure sufficient ventilation during application. Keep out of reach of children. Avoid contact with the skin and eyes. In case of contact with skin or eyes, rinse immediately with plenty of water and seek medical advice. Highly flammable: store apart from ignition sources and open fire. Do not smoke near the product.

Application instruction The surfaces to be bonded must be free of grease, oil, dust and loose particles. Cut open the threaded end of the cartridge and screw on the installation nozzle to direct the flow of the adhesive. Cut the nozzle so that the hole is sufficient for application of the necessary amount of adhesive. Place the cartridge with the nozzle into the gun and pump the adhesive mass into the nozzle by repeatedly pressing the gun trigger. If you are dealing with a clean installation joint, apply painter’s tape before putting the element in place. Remove the tape before the adhesive dries completely. The SpeedFix Mirror 936 adhesive can be used as a contact glue or single-side wet glue. Single-side wet bonding Apply the adhesive to one of the surfaces to be bonded and immediately press the surfaces together firmly to achieve the best result. Fasten the bonded surfaces to each other tightly. They should remain mechanically supported for at least 2 hours, but the recommended duration is until the adhesive becomes completely dry. Avoid any thermal, mechanical or chemical impact before the adhesive cures completely. Contact bonding Apply the adhesive to one of the surfaces to be bonded, press the surfaces together firmly and then immediately separate them. Keep the surfaces separated for 3-5 minutes and then press them together again to complete the bonding process. The surfaces must be pressed together firmly and supported to ensure maximum contact. They should remain mechanically supported for at least 2 hours, but the recommended duration is until the adhesive becomes completely dry. Avoid any thermal, mechanical or chemical impact before the adhesive cures completely.

Storage The guaranteed storage time is 12 months from the date of manufacture if stored in the closed original package in a dry place at a temperature not exceeding +30 °C. Short-term frost resistance is up to five cycles.

adhesives │ construction adhesives penosil Premium SpeedFix Acoustic Panel 625

An acrylic dispersion-based adhesive with strong initial adhesion for achieving a quick and strong bond of acoustic, sound insulation and decorative panels indoors. Mainly used for bonding panels on a mineral wool base to walls and ceilings. ■■

Excellent bonding to most acoustic, sound insulation and decorative materials: mineral wool, EPS, XPS, PUR, MDF.

■■

Can be used on most wall and ceiling substrates: gypsum board, concrete, masonry and on rendered, plastered or painted surfaces.

■■

Provides a tight bond, saves space as there is no need for a frame.

■■

Makes it possible to quickly change the appearance of a room.

■■

A quick solution for dampening noise or echo in stairwells, offices, atriums, heating and ventilation rooms with sound insulation panels.

■■

Does not contain harmful ingredients.

Colour Package

10 l plastic bucket

Field of application

Application conditions

■■ Mounting acoustic panels in rooms, where it is necessary to reduce echo in order to improve acoustics. ■■To mount sound insulation panels in stairways, offices, atriums, heating and ventilation rooms – wherever there is a need for sound or echo damping. ■■To mount finishing and decorative panels in order to give a room a new appearance.

adhesives │ construction adhesives penosil Premium SpeedFix Acoustic Panel 625 USAGE RESTRICTIONS ■■ Curing may take longer if both adhesive-covered surfaces are non-porous. ■■ Pre-test required for natural stone.

Technical specification PROPERTY

Unit

Value

Working time

minute

3-5

Skin-forming time

minute

Surface dry

mm/24 h 2-3

Curing system Density (DIN 53479)

drying g/cm³

1,3

Shear strength (WGM214)

kg/cm²

Tensile strength (WGM214)

kg/cm²

Temperature resistance

˚C

-30 and +70

Properties of cured adhesive

The above parameters have been measured under the following conditions: temperature +23 °C and 50% relative humidity.

Cleaning ■■ Clean the uncured adhesive with water or with PENOSIL Premium Cleaning Wipes. ■■ Cured adhesive can be removed mechanically.

Storage Guaranteed storage time is 12 months from the manufacturing date, if stored in the original hermetically sealed package in a dry place and at temperatures between +5 °C and +30 °C.

ADHESIVES │ CONSTRUCTION ADHESIVES PENOSIL PREMIUM SUPERFIX 626

Solvent-free adhesive for instant adhesion. Good sealing and filling properties. Based on polyacrylat dispersion. Adheres well to most building materials, such as wood, unpolished stones, concrete, plasterboard, ceramics, silicates, bricks, polystyrene. ■■ Can be used on wet surfaces, however, a possibility for quick drying should be established. ■■ Paintable with dispersion paints. ■■ UV and moisture proof. ■■

Colour Package 310 ml cartridge, 12 cartridges in box.

Field of application

Application conditions

■■ Strengthening of srew binding during installation of carpentry elements, wooden and plasterboards, and decorative panels. ■■ Filling of cracks, dowel, stucco and panel openings in plasterboards. ■■ Adhesion of plaster decorations, fillets, wall boards and other decorative elements.

■■ Usage temperature between +5 °C and +35 °C. ■■ The surfaces must be clean from dust, loose particles and oil. ■■ Good ventilation is required for the removal of moisture separating during curing.

ADHESIVES │ CONSTRUCTION ADHESIVES PENOSIL PREMIUM SUPERFIX 626

Usage restrictions ■■ Elements will have a rigid connection, which is why the adhesion is not suitable for moving connections. ■■ Not suitable for surfaces in permanent contact with water. ■■ Curing may slow down when the connected surfaces are non-porous.

Technical specification PROPERTIES

UNIT

VALUE

Application time

minute

2-3

Curing

hour

Density (DIN 53 479-B)

g/cm³

1,69

Properties of cured adhesive Hardness (Shore A) Temperature resistance

40±2 ˚C

-30 to +70

The values specified were obtained at 23 °C and 50% relative humidity.

Recommendation Cartridge gun PENOSIL Sealant Manual Gun 310 ml.

Application instruction The surfaces must be free from fat, oil, dust and loose particles. Cut off the threaded end of the cartridge and screw on the application nozzle for directing adhesive. Cut the threaded end in a way where a suitable opening for application is produced. Place the cartridge together with the applicator in the gun and fill the installation nozzle with adhesive, by repeatedly pressing the gun trigger. Apply the adhesive to the surface to be connected and immediately press to the substrate. When gluing heavy plates, apply adhesive on both surfaces and use a trowel similar to the one used for applying tile adhesive. Press the surfaces together and support them before the adhesive starts to cure. Lighter elements should be supported for 2-3 hours, heavy and hanging elements until final curing (curing speed 2.5 mm/24 h). Protect the adhesive against moisture and ensure a good ventilation during the curing period. After curing, the adhesive may be painted with acrylic paints.

Storage Cleaning ■■ Clean the uncured adhesive with water or PENOSIL Premium Cleaning Wipes. ■■ Cured adhesive should be removed mechanically.

Guaranteed storage time 12 months starting from the date of manufacture if stored in a closed original package in a dry place between +5 °C and +30 °C, avoid freezing. Short-term cold resistance 10 days at up to -18 °C.

ADHESIVES │ CONSTRUCTION ADHESIVES PENOSIL PREMIUM STYROFIX 615

Solvent-free odourless adhesive sealant for gluing polystyrene and polyurethane foam elements. Produced on acrylate dispersion basis. Adheres well to most construction and finishing materials such as polystyrene, polyurethane foam, wood, plasterboard, ceramics and various stone surfaces. ■■ Can be used on moist surfaces, however, a possibility for quick drying should be established. ■■ Paintable with dispersion paints. ■■ UV and moisture proof. ■■

Colour Package 280 ml cartridge, 12 cartridges in box.

Field of application

Application conditions

■■ Gluing polystyrene, polyurethane foam, wooden and plaster decorations, finishing fillets and other decorative elements on various substrates. ■■ Filling of cracks, dowel, stucco and panel openings in plasterboards or decorative elements.

■■ Usage temperature between +5 °C and +30 °C. ■■ The surfaces must be clean from dust, loose particles and oil. ■■ Good ventilation is required for the removal of moisture separating during curing.

ADHESIVES │ CONSTRUCTION ADHESIVES PENOSIL PREMIUM STYROFIX 615

Technical specification PROPERTIES

UNIT

VALUE

Application time

minute

1-2

Curing

hour

Curing system Density (DIN 53 479-B)

dries g/cm³

1,69

Properties of cured sealant Hardness (Shore A) Temperature resistance

40±2 ˚C

-30 to +70

The values specified were obtained at 23 °C and 50% relative humidity, unless otherwise specified.

Recommendation Cartridge gun PENOSIL Sealant Manual Gun 310 ml.

Cleaning ■■ Use PENOSIL Premium Cleaning Wipes or solvents such as acetone or white spirit for removing uncured adhesive. ■■ Cured adhesive should be removed mechanically.

Application instruction The surfaces must be free from fat, oil, dust and loose particles. Cut off the threaded end of the cartridge and screw on the application nozzle for directing adhesive. Cut the threaded end in a way where a suitable opening for application is produced. Place the cartridge together with the applicator in the gun and fill the installation nozzle with adhesive, by repeatedly pressing the gun trigger. Apply the adhesive to the surface to be connected and immediately press to the substrate. When gluing heavy plates, apply adhesive on both surfaces and use a trowel similar to the one used for applying tile adhesive. Press the surfaces together and support them before the adhesive starts to cure. Lighter elements should be supported for 2-3 hours, heavy and hanging elements until final curing (curing speed 2.5 mm/ 24 h). Protect the adhesive against moisture and ensure a good ventilation during the curing period. After curing, the adhesive may be painted with acrylic paints.

Storage Guaranteed storage time 12 months starting from the date of manufacture if stored in a closed original package in a dry place between +5 °C and +30 °C, avoid freezing. Short-term cold resistance 10 days at up to -18 °C.

ADHESIVES │ CONSTRUCTION ADHESIVES PENOSIL PREMIUM SEAL&FIX 706

Neutral moisture-curing adhesive and sealant with stable elasticity. Very good adhesion properties combined with the best sealing properties. Based on hybrid-polymer. Great adherence on most building materials such as aluminum, galvanized steel, copper, glass, concrete, wood, bricks and also wet substrates. ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■

High performance mechanical properties. Fast curing and nearly no shrinkage. Easy to apply, even in adverse conditions andlow temperatures. Suitable for alkaline, acidic and metal surfaces. Suitable for uneven surfaces. Stable elasticity, suitable for moving materials and joint types. Dampens hits and vibration. Completely weather and UV radiation resistant. Mould and ageing resistant. Cured sealant can be overpainted with water-based paints. Silicone, acid, isocyanate and solvent free.

Colour Package 290 ml cartridge, 12 cartridges in box 600 ml foil package, 12 packages in box

Sealant for façade for interior and exterior application, intended for use in cold climate. EN 15651-1:2012: Type F-INT-EXT-CC: CLASS 12,5E Sealant used for sanitary applications. EN 15651-3:2012: Type S: CLASS S2

Field of application ■■ Establishing permanent connections and sealing on surfaces that expand, shrink or move due to environmental conditions by up to 20%. ■■ Insulation and sealing of connections, also on surfaces where acid-curing silicone or less elastic sealants cannot be used. ■■ Sealing joints between window or door frames and brickwork, for stairs, balconies, etc. Bonding and sealing of windowsills, skirting boards, covering boards, etc. ■■ Elastic bonding and sound insulation for equipment in the

field of ventilation, sewage and car industry, as well as for audio equipment. ■■ Bonding in vibrating constructions (vehicle body, containers, metal-to-metal, etc.).

Application conditions ■■ Usage temperature between +5 °C and +40 °C. ■■ The surfaces must be clean from dust, loose particles and oil. ■■ Non-porous surfaces should be cleaned with solvent and a clean, non-fluffy cotton cloth. Solvent rests should be removed before evaporating with a clean cloth.

ADHESIVES │ CONSTRUCTION ADHESIVES PENOSIL PREMIUM SEAL&FIX 706

Usage restrictions ■■ Do not use for sealing aquariums and underwater joints.

Technical specification PROPERTIES

UNIT

VALUE

Tack-free time

minute

30–45

Curing time

mm/24 h

2–3

Density (DIN 53 479)

g/cm³

1,52

Properties of cured adhesive Hardness (Shore A)

approx. 50

Movement capability (ISO 11 600)

± 20

Elongation at break (ISO 37)

200

Modulus at 100% elongation (ISO 37)

N/mm²

1,4

Tensile strength (ISO 37)

N/mm²

2,0

Temperature resistance

˚C

-40 up to +90

The values specified were obtained at 23 °C and 50% relative humidity.

Recommendation PENOSIL Premium Cartridge Gun for use with the cartridges.

Application instruction Cut off the threaded end of the cartridge and screw on the application nozzle for directing adhesive sealant. Cut the threaded end in a way where a suitable opening for application is produced. Place the cartridge together with the applicator in the gun and fill the installation nozzle with adhesive sealant, by repeatedly pressing the gun trigger. Apply sealant in the joint by repeatedly and evenly pressing on gun trigger and smoothly dragging the nozzle continuously along the joint. After application of sealant, smooth it with a rubber silicone scraper and remove excess material. Apply the sealant to the surface to be connected and immediately press to the substrate. When gluing heavy plates, apply adhesive on both surfaces and use a trowel similar to the one used for applying tile adhesive. Lighter elements should be supported for 2-3 hours, heavy and hanging elements until final curing (curing speed 2.5mm/24h). Ensure adequate ventilation in all joint locations. During the curing process, make sure that no impurities can settle on the surface and that the joint surface is not affected by mechanical load.

Storage Cleaning Uncured sealant can be removed with PENOSIL Premium Cleaning Wipes.

Guaranteed storage time 12 months starting from the date of manufacture if stored in a closed original package in a dry place between +5 °C and +30 °C.

ADHESIVES │ CONSTRUCTION ADHESIVES PENOSIL PREMIUM STRONGFIX 707

Hybrid-polymer based general purpose adhesive with very strong initial adhesion for fast, firm gluing. Used for gluing of metal, stone and wooden structures during general construction work where strong rigid adhesion is especially important. ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■

Excellent adhesion to most construction materials, including wood, bricks, concrete, glass and metals Also suitable for use on damp surfaces Suitable for gluing both indoors and outdoors No danger of corrosion to metals Does not shrink while drying Good vibration- and noise-absorbing properties UV-resistant and weatherproof Contains no harmful substances

Colour

Package 290 ml plastic cartridge, 12 cartridges in box.

Field of application

Application conditions

■■ Gluing of metal, stone and wooden structures during general construction work where strong adhesion is especially important. ■■ Gluing work that requires fast, strong adhesion. ■■ Gluing work that requires vibration- and noise-absorbing properties in addition to strong adhesion.

■■ Usage temperature between +5 °C and +40 °C. ■■ Surfaces must be free from dust, loose particles and oil. ■■ Sufficient ventilation must be ensured to separate moisture released during curing.

Usage restrictions ■■ Not suitable for sealing aquariums or underwater joints. ■■ When using on natural stone, previous testing is needed.

ADHESIVES │ CONSTRUCTION ADHESIVES PENOSIL PREMIUM STRONGFIX 707

Technical specifications PROPERTY

UNIT

VALUE

Application time

minute

5-10

Final curing

mm/24 t

2,5-3 vulcanisation through air humidity

Curing system Density (DIN 53479)

g/cm³

1,55±0,05

Properties of cured adhesive Hardness (Shore A)

60±5

Force at break (ISO 37)

N/mm²

3,2

Modulus at 100% elongation (ISO 37)

N/mm²

2,8

Elongation at break (ISO 37)

150±10

Temperature tolerance in cured state

°C

between -40 and +80

The given parameters are measured at 23 °C and 50% relative humidity.

Recommendation Cartridge gun PENOSIL Sealant Manual Gun.

Cleaning ■■ Clean the uncured adhesive with organic solvents, e.g. petroleum spirits or acetone, or PENOSIL Premium Cleaning Wipes. ■■ Cured adhesive can be removed mechanically.

SAFETY REQUIREMENTS Sufficient ventilation must be provided during use of the product. Avoid contact with the skin and eyes. If the product gets into your eyes, immediately rinse them with plenty of water and see a doctor. Keep out of reach of children.

Application instruction The surfaces to be bonded must be free of grease, oil, dust and loose particles. Before gluing, it is advised to test the adhesive capability of the adhesive with the surface so as to ensure its suitability for the given application. Cut open the threaded end of the cartridge and screw on the installation nozzle to direct the flow of adhesive. Cut the nozzle so that the hole is sufficient for application of the necessary amount of adhesive. Place the cartridge with the nozzle into the gun and pump the adhesive mass into the nozzle by repeated-ly pressing the gun trigger. Apply the adhesive mass to the surface and press the components immediately against the surface. Heavier components need to be supported for at least 2 hours, preferably during final curing of the mass (curing speed 2.5-3 mm/24 h).

Storage Guaranteed storage time is 12 months starting from the date of manufacture if stored in a closed original packaging in a dry place at temperatures between +5 °C and +30 °C. Avoid freezing.

ADHESIVES │ CONSTRUCTION ADHESIVES PENOSIL Premium Membrane Fix 629

Solvent-free adhesive based on acrylate polymers for bonding vapour barrier membranes and films, foil and load covering film during general construction and repair work. Major benefit of the adhesive compared to membrane tapes is good bonding with porous surfaces such as wood, wool boards and stone and plaster surfaces. Preserves a long bonding surface, permitting its use in very many different applications, including DIY applications. ■■ Excellent bonding capacity with most construction

■■ ■■ ■■ ■■ ■■ ■■

materials and surfaces such as wood, bricks, concrete, glass, various metals, plastered surfaces, gypsum boards, wool boards and cardboard. Bonds well with PE, PP and PA films, which do not bond with most of the adhesives. Also appropriate for use on moist surfaces. Does not smell. Appropriate for bonding in interior conditions. After curing the adhesive remains plastoelastic and the surface maintains a long-term bond. For bonding vapour barrier membranes and films with one another can be used as contact adhesive.

Colour

Package 310 ml plastic cartridge, 12 pcs per box

Field of application

Application conditions

■■ For bonding all kinds of membranes, for example the vapour barrier membrane of a connected roof to masonry, plastered surface, gypsum board wall, wood, etc. ■■ For bonding vapour barrier membranes and films with one another. ■■ For temporarily bonding dust protection films to a ceiling or wall. ■■ Sutable for creating an adhesive layer to most of the materials.

■■ Operating temperature range: from +5 °C to +40 °C. ■■ The surfaces must be free of dirt, dust, oil and loose particles.

ADHESIVES │ CONSTRUCTION ADHESIVES PENOSIL Premium Membrane Fix 629

USAGE RESTRICTIONS ■■ This adhesive is not suitable for bonding loaded elements. ■■ Not suitable for use in places exposed to water. ■■ To only be used in internal conditions.

Technical SPECIFICATION PROPERTY

UNIT

VALUE

Skin-forming time

minute

120

Curing system

drying

Density

g/cm3

1,05

Temperature resistance when cured

˚C

-40 to +80

The above parameters have been measured under the following conditions: temperature 23 °C and 50% relative humidity.

Recommendation PENOSIL Sealant Manual Gun cartridge gun.

Cleaning Clean the uncured adhesive with PENOSIL Premium Cleaning Wipes or white spirit.

Application instruction The surfaces to be bonded must be free of grease, oil, dust and loose particles. Cut open the threaded end of the cartridge and screw on the installation nozzle to direct the flow of the adhesive. Cut the nozzle. Place the cartridge with the nozzle into the gun and pump the adhesive mass into the nozzle by repeatedly pressing the gun trigger. If a membrane is glued on a porous substrate, apply adhesive on the porous surface and press the membrane tightly onto the adhesive by rolling the surfaces tightly together. To achieve faster immediate bonding, the smoothened adhesive surface must be left to dry until the colour becomes dark and the adhesive is covered with a tacky film layer before the surfaces are pressed together. To connect vapour barrier membranes with one another, the surfaces to be bonded must be pressed together directly after application of the adhesive and then immediately separated. When the adhesive has darkened and a dry film has started forming on the surfaces, the surfaces must be permanently bonded. Leave sufficient clearance for the vapour barrier membrane in order to prevent potential stress caused by deformations, which can cause the tearing of the membrane or the adhesive joint.

Cured adhesive can be removed mechanically.

Storage SAFETY REQUIREMENTS Avoid contact of the chemical with the skin and eyes. If the product gets into your eyes, rinse them with plenty of water immediately and see a doctor. Keep out of the reach of children.

Guaranteed storage time is 12 months starting from the date of manufacturing if stored in the hermetically sealed original package in a dry place between +5 °C and +30 °C. Prevent freezing.

ADHESIVES │ CONSTRUCTION ADHESIVES PENOSIL PREMIUM WOODFIX PVA D3 647

Moisture-proof PVA-type wood adhesive. Moisture proofness D3 in accordance with DIN EN204/205. Quick and strong adhesion. Adhesive joint is stronger than the wood itself. ■■ In addition to wood, glues well cardboard, leather, textile, porcelain, bricks, concrete, metal, plaster board. ■■ After drying becomes semitransparent and solid. ■■ Indispensable in furniture industry. ■■

Colour White, transparent after curing

Packaging 500 ml plastic bottle, 8 pieces in box.

Field of application

Application conditions

■■ Connecting wooden parts in places where moisture proofness of the adhesive connection is required. ■■ Connecting wooden elements and adhering textile on wooden elements. ■■ Gluing frames and wooden decorative elements. ■■ Gluing spines of hardback books. ■■ Gluing linoleum with insulated base. ■■ Installing laminate and board parquet indoors.

■■ Usage temperature between +15 °C and +25 °C. ■■ The surfaces must be clean from dust, loose particles and oil. ■■ Good ventilation is required for the removal of moisture separating during curing. ■■ Humidity content of the adherent wood must be 8-12%.

ADHESIVES │ CONSTRUCTION ADHESIVES PENOSIL PREMIUM WOODFIX PVA D3 647

Usage restrictions ■■ Elements will have a rigid connection, which is why the adhesion is not suitable for moving connections. ■■ Not suitable for surfaces in permanent contact with water.

Technical specification PROPERTIES

UNIT

VALUE

Application time

minute

6-10

Curing

hour

Curing system

dries

2,5-3,5

Properties of cured adhesive Humidity resistance class D3 (DIN EN 204/205 D3/1)

N/mm²

Temperature resistance

˚C

-40 to +80

The values specified were obtained at 23 °C and 50% relative humidity.

Application instruction The surfaces must be free from fat, oil, dust and loose particles. Mix the adhesive well. Cut the tip of the cap so that a suitable opening for application is produced. Apply the adhesive in a thin layer to one of the surfaces to be glued. Seal the bottle opening with a button in the lower part of the cap in order to not let the glue dry. In 10 minutes at the latest press the surfaces to be connected together and place under press for 20 to 45 minutes depending on the material. In case of harder wood surfaces and coniferous wood (oak, birch), the glue should be applied to both surfaces and held under pressure for a longer time (up to 50 min). Protect the adhesive against moisture and ensure a good ventilation during the curing period.

Storage Cleaning ■■ Clean the uncured adhesive with water or PENOSIL Premium Cleaning Wipes. ■■ Cured adhesive should be removed mechanically.

SAFETY REQUIREMENTS Ensure sufficient ventilation during application. Keep out of the reach of children. Avoid contact with skin and eyes. In case of contact with skin or eyes, rinse immediately with plenty of water and seek medical advice. Highly inflammable, keep away from sources of ignition and do not smoke near the product.

Guaranteed storage time 12 months starting from the date of manufacture if stored in a closed original package in a dry place between +5 °C and +30 °C, avoid freezing.

ADHESIVES │ CONSTRUCTION ADHESIVES PENOSIL PREMIUM FLOOR&WALL PARQUETFIX 749

Silane modified polymer-based high-quality adhesive for gluing wooden parquets on different floors. The adhesive is moisture-curing, thereby forming an elastic and noise-suppressing connection. ■■ Adheres well to various substrates. ■■ Elastic, reduces the shear stress between the parquet and the substrate, thereby compensating the expansion and shrinkage of wood. ■■ Ensures an optimal step noise insulation and reduces the room noise by up to 13 dB, depending on the parquet type. ■■ Suitable for water heated floors. ■■ Optimal application time. ■■ Can be treated in already 24 hours. ■■ Does not contain silicones, isocyanates, harmful aromatic hydrocarbons, terpenes, plasticisers, substances emitting formaldehyde, or halogen organic compounds.

Colour Packaging 10 L plastic bucket / 15 kg per bucket. foil package 600 ml, 20 pcs. in box.

Field of application

Usage restrictions

■■ Installation of massive-, mosaic-, slatted-, two-/three-layer parquet (DIN/EN 13489) and industrial parquet. ■■ Installation of wooden boarding.

■■ In case of wood treated with chemicals or containing large amount of oil, the adhesion and compatibility should be tested. ■■ Do not use on moist, uninsulated substrate. Adhesive doesn´t substitute insulation or protect wood from moisture.

Application conditions ■■ Usage temperature between +5 °C and +30 °C, optimum usage temperature is 18-25 °C. ■■ Air humidity should not exceed 65% during application. ■■ The surfaces must be clean from dust, loose particles and oil.

ADHESIVES │ CONSTRUCTION ADHESIVES PENOSIL PREMIUM FLOOR&WALL PARQUETFIX 749

Technical specification PROPERTY

UNIT

VALUE

Application time

minute

up to 30

Skin forming time

minute

30-40

Drying time

mm/24h

2,5-3

Density

g/cm³

1,7 ± 0,1

Final elongation (ISO8339)

182

Elasticity recovery

Modulus of elasticity at elongation (ISO 8339)

N/mm²

1,0

Tensile strength (ISO37)

N/mm²

2,0

Change in volume

Properties of cured adhesive

Hardness (Shore A) Temperature resistance after drying

37 ± 5 °C

-20 to +80

Application instruction Preparation The substrate should be ready for installation, i.e. strong, clean, dry, as well as oil, dust and fat free. Usage conditions should be checked in accordance with effective construction requirements and DIN 18356 (parquet works). Grind cement and anhydrite floors, self-levelling anhydrite floors and uneven, older and unstable substrates, until a strong, adhering surface is formed. After grinding, completely remove dust from the floor. In case of > 800 mm parquet elements, an evenness tolerance of ≤ 2 mm according to DIN 18202 has to be ensured. Admissible moisture content of substrate: FLOOR HEATING

The values specified were obtained at 23 °C and 50% relative humidity, unless otherwise indicated

Cleaning Use PENOSIL Premium Cleaning Wipes or organic solvents such as acetone or white spirit for removing uncured adhesive. When removing adhesive from parquet, consider the surface material, a universal cleaning agent for uncured adhesive is usually denaturated spirit. Cured adhesive should be removed mechanically.

Storage Guaranteed storage time 12 months starting from the date of manufacture if stored in a closed original package in a dry place between +5 °C and +25 °C.Avoid freezing.

SAFETY REQUIREMENTS Ensure sufficient ventilation during application. Avoid contact with skin and eyes. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Keep out of the reach of children.

Yes

Cement floors

< 2,5%

< 1,8%

Anhydrite floor

< 0,5%

< 0,3%

Magnesite floor

< 3-12% < 3-12%

Gluing Let the adhesive achieve room temperature, remove the skin from the adhesive, if required. Apply the adhesive to the substrate by using a trowel (notches 4-5 mm) to an area that can be covered within the application time. Press the parquet elements in the adhesive, shift to the correct position and bring together by using an installation hammer, thereby following the instructions of the parquet manufacturer. No glue should get between the parquet elements. Any adhesive on the parquet must be immediately removed. Adhesive consumption with a 4-5 mm trowel is 900-1000 gr/m². After treatment and loading: The parquet can be after-treated (e.g. grinded) in 24 hours. Until that, it should be made sure that there isn’t load on the parquet floor, and that the room climate is maintained after the installation.

ADHESIVES │ CONSTRUCTION ADHESIVES PENOSIL PREMIUM FLOOR&WALL UNIVERSALFIX 619

Ready-to-use water-based acrylic adhesive for gluing various floor and wall coverings such as carpets, PVC, vinyl, felt, cork. Suitable substrates are self-levelling compounds, cement, plasterboard, concrete and fibreboard. Good adherence even on smooth and non-absorbing surfaces. Has a consistency of a non-sag paste, can be applied with a trowel. ■■ Immediate adhesion ■■ Ideal for various substrates and cover materials. ■■ Ideal for floor heating. ■■ Does not contain organic solvents.

Colour PACKAGING ■■0.8 L plastic bucket / 1 kg per bucket. ■■2.6 L plastic bucket / 3 kg per bucket. ■■12.8 L plastic bucket / 15 kg per bucket.

Field of application

Application conditions

■■ Gluing of floor and wall coverings.

■■ Surface, adhesive and cover material temperature during application 18-25 °C. ■■ Moisture content of substrate can be max. 90%. ■■ It is recommended to prime concrete floors and floors made from a levelling compound with Penosil Premium BetPrimer, diluted in water at a ratio of 1: 5. ■■ Please follow the instructions of the manufacturer of the cover material.

ADHESIVES │ CONSTRUCTION ADHESIVES PENOSIL PREMIUM FLOOR&WALL UNIVERSALFIX 619

Technical specification PROPERTY

UNIT

VALUE

Application time

minute

5-20

Tack free time (23 °C / 50% r.h.)

minute

Drying time

mm/24h

Dry matter content

Density

kg/l

1,3

Temperature resistance after drying

°C

-30 to +70

The values specified were obtained at 23 °C and 50% relative humidity, unless otherwise specified.

Application instruction Preparation The substrate should be ready for installation, i.e. strong, clean, dry, and free of oil, dust and grease. Usage conditions should be checked in accordance with effective construction requirements and DIN 18356 (parquet works). Grind cement, concrete and anhydrite floors, as well as uneven and old substrates, until a strong, adhering surface is formed. After grinding, completely remove dust. Gluing Let the adhesive and cover material achieve room temperature, remove the skin from the adhesive, if required. Stir the adhesive thoroughly and apply with a trowel on substrate to an extent that you can cover within the specified application time. Press the cover material in the adhesive, shift in the correct position and remove air bubbles between the cover

material and the substrate, by following the instructions of the cover material manufacturer. In order to achieve a stronger adhesion, the material to be glued may be laid after 5-15 minutes. The latest time for wet gluing is up to 20 minutes after applying adhesive to the substrate. The glued material should be well rubbed by using a suitable tool. In rare cases, when smooth and non-absorbing materials are used, double-sided gluing is recommended. Apply the adhesive with a trowel on the substrate as usual, place the material to be glued on the adhesive, press the surfaces together for a moment, and remove immediately. Keep the surfaces separated for 5-10 minutes, so that the adhesive can dry for a while, and then connect them finally, by pressing the cover strongly against the substrate. In case of wet room covers, make all cover material joints waterproof.

Adhesive consumption and gluing method depends on the cover material and the absorbing properties of the substrate: COVER MATERIAL

CONSUMPTION

Vinyl, even

APPLICATION METHOD ABSORBING SURFACES

NON-ABSORBING SURFACES

4 - 5 m²/litre

Gluing with delay

Instant double-sided gluing

Foam backed vinyl flooring

4 - 5 m²/litre

Instant gluing

Gluing with delay

Meshbacked vinyl flooring

4 - 5 m²/litre

Instant gluing

Gluing with delay

Vinyl plates

4 - 5 m²/litre

Gluing with delay

Instant double-sided gluing

Cork with PVC

4 m²/litre

Gluing with delay

Felt flooring

2 - 3 m²/litre

Instant gluing

Gluing with delay

Carpets

4 - 5 m²/litre

Instant gluing

Gluing with delay

Coconut carpets

2 - 3 m²/litre

Instant gluing

Cleaning Clean the uncured adhesive with water and cloth or PENOSIL Premium Cleaning Wipes. Methylated spirits can be used for removing cured adhesive. Wash the tools in water immediately.

Storage Guaranteed storage time is 12 months starting from the date of manufacture if stored in a closed original package in a dry place between +5 °C and +30 °C, avoid freezing.

adhesives │ construction adhesives PENOSIL Premium SpeedFix Construction 878

Multipurpose adhesive foam for various construction works both indoors and outdoors. Replaces traditional fastening by compound or with screwsin many cases, as it is a simpler, faster, quieter, cleaner and cheaper solution. Furthermore, the adhesive foam has good thermal insulation characteristics and noise barrier properties as well as. ■■ Very good gluing and sealing properties. ■■ Excellent adhesion to various materials, such as

polystyrene, plaster, wood, concrete, stone, metal and PVC, as well as mineral substrates.

■■ Very economical, saving time and money. ■■ Uniformly strong structure and sufficient elasticity. ■■ Very little post-expansion and expansion pressure

allows fast and accurate gluing.

■■ High-quality results in various weather conditions. ■■ Can be used with a foam gun or the supplied

EasyGun applicator.

■■ The EasyGun applicator enables the use of the adhe-

sive foam for sealing in narrow spaces between the insulation or building boards.

Colour Package 1000 ml aerosol can, contents 750 ml, 12 cans per box

Field of application

Application conditions

■■ Fixing of insulating boards to facades and basements. ■■ Fixing of interior finishing tiles to walls. ■■ Installation of window sills. ■■ Gluing of building blocks. ■■ Sealing of narrow spaces between the insulation or building boards.

■■ Air temperature during use between -5 °C and +30 °C. Best results at +20 °C. ■■ Can temperature during use between +5 °C and +25 °C. Best results at +20 °C. ■■ Yield will depend on the operating conditions significantly – the temperature, humidity, and expansion volume. ■■ The surfaces to be joined must be free of dust, loose particles and oil. ■■ Cured adhesive foam can be painted over with water-borne paint.

adhesives │ construction adhesives PENOSIL Premium SpeedFix Construction 878 USAGE RESTRICTIONS

Application instruction

■■ Adhesive foam does not stick to Teflon, polyethylene or silicone surfaces. ■■ The cured adhesive foam is sensitive to UV and sunlight and needs to be coated with a suitable opaque material.

Hold the adhesive can in an upright position and screw it onto the gun, holding the handle of the gun with one hand and screwing the can with the other. While screwing, make sure that the gun is not pointed at anyone. Do not screw the can onto the gun with the valve facing downwards or screw the gun above the can. After attaching the gun, shake the can intensely at least 20 times and turn it to the working position.

Technical specification Property

Unit

Value

Tack-free time (TM 1014)

minute

Density (TM 1019)

kg/m

~22

Fire class of cured adhesive foam (DIN 4102-1)

Dimensional stability (WGM103)

Shear strength (8 mm)

kPa

>47

Adhesion strength (8 mm)

+23 °C

MPa

0,12

Adhesion strength (8 mm)

+5 °C

MPa

0,1

Adhesion strength (8 mm)

-5 °C

MPa

0,08

Average shear strength in masonry *

MPa

>0,43

Average compression strength in masonry *

MPa

>2,6

Thermal conductivity factor (TM 1020)

W/(m·K)

0,034

Temperature resistance of cured foam

°C

-50 to +90

The parameters indicated have been measured at temperature +23 °C and 50% relative air humidity, unless otherwise specified. * Tested with aerated concrete blocks. All the test samples shattered from the block.

Recommendation Foam gun PENOSIL FoamGun P1.

Cleaning ■■ Liquid adhesive foam can be cleaned with PENOSIL Premium Foam Cleaner. ■■ Cured adhesive foam can be removed with PENOSIL Premium Foam Remover. ■■ Use moistened PENOSIL Premium Cleaning Wipes to clean your hands, clothes and the foam gun from non-cured adhesive foam.

Storage Cans should be stored and transported in a vertical position. Store in a cool, dry place. Store at a temperature between +5 °C and +30 °C. Cans must not be stored at a temperature above +50 °C, in the vicinity of heat sources or in direct sunlight. The guaranteed shelf-life is 12 months in an unopened package.

Safety requirements The product is flammable. Protect from overheating and keep away from ignition sources and direct sunlight. Avoid smoking while working. May cause hypersensitivity by inhalation and skin contact. Ensure sufficient ventilation during application. Wear safety glasses and gloves. Keep out of the reach of children. The cured adhesive foam can be handled without any hazard to health.

The amount of foam adhesive exiting the can is controlled by the gun trigger. Apply the adhesive foam with even strips on the insulation board in parallel with the sides of the insulating board (3-4 cm from the edge) and one strip in the middle of the board parallel to the long side (gaps up to 25 cm). After installing the adhesive foam onto the insulation board, wait ~ 2 minutes and then push the board onto the wall. The evenness of fixed foam polystyrene tiles can be adjusted up to 5 min. For balconies, ceilings or long trusses, use fixing hardware. A pre-wetted base surface ensures faster foam curing and better results. Surface preparation Remove dust, loose particles and oil from surfaces. Moisten the surfaces to achieve faster adhesive foam curing and better results. In cold conditions it is necessary to warm up the can in a warm room or warm water (up to 30 °C) before beginning the work. Working with the EasyGun applicator. Shake the can vigorously at least 20 times. Keep it in an upright position and remove the cap on the adapter. Install the EasyGun applicator onto the can valve by pushing it lightly until it attaches. To use it, turn the bottom of the can upwards and push the trigger of the EasyGun applicator with your fingers. Adjust the foam amount with the trigger of the applicator. Use with a foam gun. Shake the can vigorously at least 20 times. Keep it in an upright position and remove the cap on the adapter. Screw the can onto the gun, holding the handle of the gun with one hand and screwing the can with the other. While screwing, make sure that the gun is not pointed at anyone. Do not screw the can onto the gun with the valve facing downwards and also do not screw the gun above the can. To use it, turn the bottom of the can upwards and press the trigger. The amount of foam is controlled by the gun trigger. Fixing of insulation and interior finishing boards. Apply the adhesive foam with even strips on both sides of the insulation or finishing board (3–4 cm from the edge) and one strip in the middle of the board parallel to the long side (gaps up to 25 cm). After installing the adhesive foam onto the insulation board, wait 2-3 minutes and then push the board onto the wall. The evenness of fixed boards can be adjusted up to 5 min. The adhesive foam is strong enough to mount any insulation board. If the insulation plate is covered with facade coatings, the need for additional mechanical fixation must be determined upon construction design, building codes, standards and other relevant guidance materials. The use of fasteners (screws, dowels) is always advisable. In general, it is not advisable to use adhesive foam on bituminous surfaces. In some cases sufficient bonding is still ensured, for example, when fixing insulation boards to bitumen treated basements before re-filling with soil. Always test before permanent using. Mounting of window sills. Before fixing the sill make sure that the base is level. Mount the window sill to support blocks. The foam can only be used as a glue. Apply the adhesive to the substrate at a distance of 3–4 cm from edge. Use weights to fix sill until the adhesive foam is cured. Gluing of building blocks. The adhesive foam can be used for laying interior walls with nonload-bearing building blocks. The first block row must be levelled with a mortar. The substrate must be moistened because the adhesive foam cures through atmospheric humidity. At temperatures below +5 °C it is recommended to treat the block surface with PENOSIL Premium Foam Activator. The adhesive foam forms a thin layer of adhesive. After the adhesive is formed, squeeze the blocks together immediately. The adhesive must be applied to both the vertical and horizontal sides of the stone block. Consult the reseller or the designer for compatibility with different stone-based materials and other technical issues regarding adhesive strength.

ADHESIVES │ CONSTRUCTION ADHESIVES PENOSIL PREMIUM POLYSTYROL FIXFOAM 877

Foam adhesive for fixing insulation boards on facades and foundations and fixation of interior design boards to walls. Compared to the traditional gluing of facade boards and the modern fastening with foam adhesive, the adhesive is easier, faster and cheaper. ■■ ■■ ■■ ■■ ■■ ■■ ■■

Very good adhesive and sealing properties. Adheres well to various materials, including foam polystyrene and mineral substrates. Very economical, saves time and money. Even and strong structure, sufficient elasticity. Low post-expansion allows fast and accurate adhesion. High-quality result under various weather conditions. Application with foam gun.

COLOUR PACKAGE

1000 ml aerosol can, content 750 ml, 12 cans in a box

FIELD OF APPLICATION

APPLICATION CONDITIONS

■■ Fastening of insulation boards to facades and foundations. ■■ Fastening of interior design boards to walls. ■■ Fixation of roof tiles and thermal insulation. ■■ Thermo and sound insulation.

■■ Air temperature during application +5 °C to +30 °C, best results at +20 °C. Temperature during application +5 °C to +25 °C, best results at +20 °C. ■■ Yield considerably depends on working conditions – temperature, air humidity, expansion room. ■■ The surfaces must be clean from dust, loose particles and oil. ■■ Cured foam can be painted with water-based paints.

ADHESIVES │ CONSTRUCTION ADHESIVES PENOSIL PREMIUM POLYSTYROL FIXFOAM 877

Application of foam adhesive pictures 1, 2, 3, 4

Screw the foam gun to the can!

Apply the foam adhesive to the insulation board along the edges, at a distance of 3–4 cm from the edge.

Shake the can well!

Apply a foam stripe in the middle of the board, parallel to the longest side. Distance between foam adhesive stripes up to 25 cm.

Fastening plates to a wall pictures 5, 6, 7, 8

Wait 2 minutes after the application of foam.

Press the board to the wall.

ADHESIVES │ CONSTRUCTION ADHESIVES PENOSIL PREMIUM POLYSTYROL FIXFOAM 877

Fastening plates to a wall pictures 5, 6, 7, 8

The location of the board can be adjusted within up to 5 minutes.

Fill the gaps (up to 5 mm) between boards with foam adhesive by moving from bottom to top.

Finishing and cleaning of tools pictures 9, 10, 11

Remove excess foam after curing with a sharp knife.

Use PENOSIL Premium Foam Cleaner for cleaning the tools. First, clean the adapter and the nozzle, by spraying the cleaner.

Then screw the cleaner can to gun adapter and spray, until the gun is completely clean.

ADHESIVES │ CONSTRUCTION ADHESIVES PENOSIL PREMIUM POLYSTYROL FIXFOAM 877

TECHNICAL SPECIFICATION PROPERTY

UNIT

Tack free time

minute 10-12

Cutting time (30 mm bead)

minute 30-40

Completely cured in joint

at +23 °C at +5 °C

Density

VALUE

9-11

hour

12-16

kg/m3

Fire class of cured foam (DIN 4102-1)

25-30 B2

Volume decrease

non

Post-expansion

up to 30

Flash point of cured foam

°C

Tensile strength (BS 5241)

N/cm

Thermal conductivity

W/m·K 0,034

Sound reduction index

400 2

Temperature resistance of cured foam long term: short term:

°C

11,2

60 -50 to +90 -65 to +130

The values specified were obtained at +23 °C and 50% relative humidity, unless otherwise specified.

APPLICATION INSTRUCTION Hold the foam can in upright position and turn the gun side by holding the gun handle with one hand and turn the can with the other hand. Make sure that the gun is not pointed to other persons when turning it. The can must not be screwed to the gun with the valve upside down or by turning the gun on the can. After fixing the gun, shake the can well at least 20 times and turn into application position. The foam output can be adjusted by gun trigger. Apply the foam adhesive to insulation boards as an even flow, parallel with the sides of the insulation board (3-4 cm from the edge) and one stripe in the middle, parallel to the longest side (up to 25 cm between adhesive stripes). After applying the foam adhesive to the insulation board wait ~2 min and then press the board to the wall. The level of installed foam polystyrene boards can be adjusted within up to 5 minutes. Use fastening equipment for balconies, ceilings or long spans. A moistened substrate ensures faster curing and better result.

RECOMMENDATION Foam gun PENOSIL Premium FoamGun P1.

CLEANING ■■ Uncured foam can be cleaned with PENOSIL Premium Foam Cleaner ■■ Cured foam can be removed with PENOSIL Premium Foam Remover ■■ Hands, clothes and foam gun can be cleaned from uncured foam with moistened PENOSIL Premium Cleaning Wipes.

STORAGE The cans must be stored and transported in vertical position. Store in a cool and dry place. Store at +5 °C to +30 °C. The foam cans must not be stored above +50 °C, in vicinity of heat sources or in direct sun light. Guaranteed storage time in unopened package 9 months.

ADHESIVES │ CONSTRUCTION ADHESIVES PENOSIL PREMIUM STONEFIX 827

One-component polyurethane adhesive for the fixing of building blocks and stones in construction. Compared to building mortar, Penosil Premium StoneFix 827 allows you to carry out brickwork significantly more quickly and cleanly, the working environment stays free of dust and the foam gun is the only tool needed. ■■ ■■ ■■ ■■ ■■

Very good adhesive properties. Strong adhesive bonding in just 30 minutes. Very economical, saving time and money. A quality result from as low as -5 °C. Application with foam gun.

Colour

Package 1000 ml aerosol can, contents 750 ml, 12 cans per box

Field of application

Application conditions

■■ The joining of building blocks and stones when building non-load-bearing interior walls.

■■ Air temperature during application between -5 °C and +35 °C. Best results at +20 °C. ■■ Can temperature during application between +5 °C and +25 °C. Best results at +20 °C. ■■ The surfaces to be joined must be free of dust, loose particles and oil. ■■ Due to the difference in materials and the different possibilities of use, it is recommended to carry out tests to determine the suitability of the product in the specific location of use or consult the seller of the adhesive.

ADHESIVES │ CONSTRUCTION ADHESIVES PENOSIL PREMIUM STONEFIX 827

Technical specification PROPERTY

UNIT

VALUE

Tack Free Time

minute

8-15

Completely cured in gap (+23 °C)

hour

Completely cured in gap (+5 °C)

hour

Fire class of cured adhesive (DIN 4102-1) Flash point of cured adhesive Temperature resistance of cured adhesive

B3 °C

400

°C

long-term: -40 to +90 short-term: -40 to +130

The values specified were obtained at +23 °C and 50% relative humidity, unless otherwise specified.

Recommendation Foam gun Penosil Premium FoamGun P1.

Cleaning ■■ Uncured foam can be cleaned with Penosil Premium Foam Cleaner. ■■ Cured foam can be removed with Penosil Premium Foam Remover. ■■ Hands, clothes and foam gun can be cleaned from uncured foam with moistened Penosil Premium Cleaning Wipes.

SAFETY REQUIREMENTS The product is flammable Protect from overheating and keep away from ignitions sources. Avoid direct sunlight and smoking while working. May cause hypersensitivity if inhaled and in the event of contact with the skin. Ensure sufficient ventilation during application. Wear protective glasses and gloves. Keep out of the reach of children. The cured adhesive can be handled without any hazard to health.

Application instruction Hold the can in upright position and screw it onto the gun, holding the handle of the gun with one hand and screwing the can with the other. While screwing it is necessary to ensure that no one is in front on the gun. Do not screw the the can onto the gun with the valve facing downwards and do not screw the gun onto the can. After attaching the gun, shake the can intensely at least 20 times and turn it into the working position so that the bottom is facing upwards. A pre-moistened surface guarantees a better result. At air temperatures below +5 °C it is recommended to moisten the connecting surfaces or treat them with Penosil Premium Foam Activator. The adhesive foam output can be adjusted by gun trigger. In cold conditions it is necessary to warm up the can in a warm room or warm water before beginning work. The temperature of the water should not exceed 30 °C. Penosil Premium StoneFix 827 creates a thin adhesive layer when exiting the foam gun. As soon as the adhesive has diffused, the stone surfaces can be joined together. The adhesive must be applied to both the vertical and horizontal sides of the block.

Storage The can should be stored and transported vertically. Store in a cool, dry place. Store at a temperature between +5 °C and +30 °C. The can must not be kept in temperatures exceeding +50 °C, close to heat sources or in direct sunlight. The guaranteed storage time is 12 months in an unopened package.

ADHESIVES │ EPOXY STICKS PENOSIL PREMIUM FastFix Epoxy Metal

Hand mixed two-component epoxy putty reinforced with anticorrosion steel allowing fast fixing and restoration of various metal products thanks to its special composition. After mixing the activator and the base in the internal and external layers, a polymer compound with is formed that can be formed or used for repairing or restoring, patching and repairing metal parts.

■■ ■■ ■■ ■■ ■■ ■■ ■■

Indispensable for small fast repairs. Easy to use, excludes faults. Very high binding strength. Consistence (reminds modelling clay) avoids drops and trickles and makes the adhesion of the product to substrate easier. After final curing, the material can be bored, sawn, ground, polished and painted. Resists water, chemicals and extreme temperatures. Does not contain solvents or evaporating agents.

Colour Package 30 ml stick in a tube, 12 tubes in a display box.

Field of application

Application conditions

■■ Restoration • Uncovered nail heads • Small machine parts • Corroded metal ■■ Forming • Special-shape tools, handles • Prototype parts ■■ Repairing • Leaking tubes • Cracks in metal surfaces

■■ Usage temperature between +5 °C and +30 °C. ■■ The surface should be clean and free of loose particles. ■■ Roughen the surface to achieve a better and faster adhesion. ■■ Moisten your fingers in order to make the mixing, applying and smoothing of the product easier.

ADHESIVES │ EPOXY STICKS PENOSIL PREMIUM FastFix Epoxy Metal

Application instruction

Usage restrictions ■■ Not suitable for general construction works.

The surfaces must be free from fat, oil, dust and loose particles.

Technical specification PROPERTY

UNIT

Processing time

minute 3-5

Curing time

hour

Strength after final curing (24 h) (Shore D)

VALUE

1 80

Transverse tensile strength

MPa

6,2

Compression strength

MPa

Density

g/cm³

2,2

Volume decrease

Electric resistance

MΩ

Dielectric strength

MV/m

11,8

°C

120 150

Upper limit of temperature resistance

long term short term

The values specified were obtained at 23 °C and 50% relative humidity, unless otherwise specified.

Cleaning ■■ Use water or PENOSIL Premium Cleaning Wipes for removing fresh putty from hands and tools. ■■ Cured putty should be removed mechanically.

SAFETY REQUIREMENTS Contains epoxy resin and triethylenetetramine. Upon contact may cause allergic reaction. May be dangerous upon swallowing. Seek medical advice immediately after swallowing. Irritating to eyes. Upon contact with eyes, rinse with tap water for 5 to 10 minutes. Seek medical advice if irritation persists. Keep out of the reach of children.

Cut an appropriate amount of material. Mix the product by kneading it with fingers until achieving a uniform colour. If kneading is difficult, let the product warm up to room temperature or a little bit higher. Even mixing is important for achieving a good quality. Apply the product to a repaired surface within 2 minutes after mixing. Press the product to cracks and openings, remove excess material, preferably by using a tool moistened with clean water. Upon applying the putty to moisture, wet or slowly leaking surface, press the material strongly to the surface and press until adhered. For best result, moisten your fingers in order to make mixing, applying and smoothing of cured product easier. Remove excess material before curing.

Storage Guaranteed storage time 24 months starting from the date of manufacture if stored in a closed original package in a dry place between +5 °C and +30 °C, avoid freezing. Unused product rests can be stored for future in original package.

ADHESIVES │ EPOXY STICKS PENOSIL PREMIUM FastFix Epoxy PLASTIC

Hand mixed two-component epoxy putty for repairing products made from ABS-, CPVC- and PVC-plastics. After mixing the activator and the base in the internal and external layers, a polymer compound with an industrial strength is formed that can be formed or used for repairing or restoring, patching and repairing plastic parts. Easy to use, excludes faults.

■■ ■■ ■■ ■■ ■■ ■■ ■■

Colour Package 30 ml stick in a tube, 12 tubes in a display box.

Field of application

Application conditions

■■ Restoration • Worn edges and damaged places on boats, canoes, kayaks, surfing boards, oars and paddles. • Worn knobs and latches • Worn parts of toys ■■ Repairing • Plastic parts on car • Canoes, boats and other craft • PVC furniture • Plastic trays and gutters ■■ Sealing • PVC and ABS plastic tubes

ADHESIVES │ EPOXY STICKS PENOSIL PREMIUM FastFix Epoxy PLASTIC

Usage restrictions ■■ Not suitable for general construction works. ■■ Does not adhere to polyethylene, polypropylene and some other plastics. In doubt check adherence prior to starting the work.

Application instruction The surfaces must be free from fat, oil, dust and loose particles.

Technical specification PROPERTY

UNIT

Processing time

minute 20-25

Curing time

hour

Strength after final curing (24 h) (Shore D)

VALUE

2-3 65

Transverse tensile strength

MPa

2,5

Compression strength

MPa

Density

g/cm³

1,6

Volume decrease

Electric resistance

MΩ

Dielectric strength

MV/m

11,8

°C

120 150

Upper limit of temperature resistance

long term short term

The values specified were obtained at 23 °C and 50% relative humidity, unless otherwise specified.

Cleaning ■■ Use water or PENOSIL Premium Cleaning Wipes for removing fresh putty from hands and tools. ■■ Cured putty should be removed mechanically.

ADHESIVES │ EPOXY STICKS PENOSIL PREMIUM FastFix Epoxy WOOD

Hand mixed two-component epoxy putty for repairing and reconstruction of wooden surfaces and products. After mixing the activator and the base in the internal and external layers, a polymer compound with an industrial strength is formed that can be formed or used for repairing or restoring, patching and repairing wooden parts. Easy to use, excludes faults.

■■ ■■ ■■ ■■ ■■ ■■ ■■

Indispensable for small fast repairs. Easy to use, excludes faults. Very high binding strength. Consistence (reminds modelling clay) avoids drops and trickles and makes the adhesion of the product to substrate easier. After final curing, the material can be bored, sawn, ground, varnished and painted. Resists water, chemicals and extreme temperatures. Does not contain solvents or evaporating agents.

Colour Package 30 ml stick in a tube, 12 tubes in a display box.

Field of application

Application conditions

■■ Restoration • Picture frames • Furniture • Door and window frames, incl. old keyholes ■■ Repairing • Table and chair legs • Sprigs, scratches, cracks • Pest damages • Nail and screw holes ■■ Forming • Knobs, latches, handles • Ornaments and carvings

ADHESIVES │ EPOXY STICKS PENOSIL PREMIUM FastFix Epoxy WOOD

Application instruction

Usage restrictions ■■ Not suitable for general construction works.

The surfaces must be free from fat, oil, dust and loose particles.

Technical specification PROPERTY

UNIT

Processing time

minute 15-20

Curing time

hour

Strength after final curing (24 h) (Shore D)

VALUE

1 75

Transverse tensile strength

MPa

3,5

Compression strength

MPa

Density

g/cm³

0,9

Volume decrease

Electric resistance

MΩ

Dielectric strength

MV/m

11,8

°C

120 150

Upper limit of temperature resistance

long term short term

The values specified were obtained at 23 °C and 50% relative humidity, unless otherwise specified.

Cleaning ■■ Use water or PENOSIL Premium Cleaning Wipes for removing fresh putty from hands and tools. ■■ Cured putty should be removed mechanically.

ADHESIVES │ EPOXY STICKS PENOSIL PREMIUM FastFix Epoxy AQUA

Manually mixed two-component epoxy putty for underwater repairs. After mixing the activator and the base in the internal and external layers, a polymer compound with an industrial strength is formed that can be formed or used for repairing or restoring fibre glass, metal, wooden or ceramic products. Easy to use, excludes faults.

■■ ■■ ■■ ■■ ■■ ■■ ■■

Indispensable for small fast repairs. Easy to use, excludes faults. Very high binding strength. Consistence (reminds modelling clay) avoids drops and trickles and makes the adhesion of the product to substrate easier. After final curing, the material can be bored, sawn, ground, varnished and painted. Resists water, chemicals and short-term temperatures of up to 150 °C. Does not contain solvents or evaporating agents.

Colour Package 30 ml stick in a tube, 12 tubes in a display box.

Field of application

Application conditions

■■ Restoration • Tiles and filters in pools • Tiles, fillets, knobs in swimming pools, bathrooms or shower rooms. ■■ Repairing • Hulls and decks • Pools, Jacuzzis, saunas • Emergency equipment at sea • Leaking seals • Spouts and tanks ■■ Forming • Knobs, latches, handles • Ornaments and carvings

ADHESIVES │ EPOXY STICKS PENOSIL PREMIUM FastFix Epoxy AQUA

Application instruction

Usage restrictions ■■ Not suitable for general construction works.

The surfaces must be free from fat, oil, dust and loose particles.

Technical specification PROPERTY

UNIT

Processing time

minute 15-20

Curing time

hour

Strength after final curing (24 h) (Shore D)

VALUE

1 70

Transverse tensile strength

MPa

3,5

Compression strength

MPa

Density

g/cm³

1,9

Volume decrease

Electric resistance

MΩ

Dielectric strength

MV/m

11,8

°C

120 150

Upper limit of temperature resistance

long term short term

The values specified were obtained at 23 °C and 50% relative humidity, unless otherwise specified.

Cleaning ■■ Use water or PENOSIL Premium Cleaning Wipes for removing fresh putty from hands and tools. ■■ Cured putty should be removed mechanically.

adhesives │ construction adhesives PENOSIL Premium Prime&Fix

Synthetic rubber based universal spray adhesive, which can also be used as a primer for improving adhesion when installing vapour and wind barrier tapes. Priming is mostly necessary for concrete surfaces, various masonry and wood substrates. The adhesive layer is transparent and guarantees an immediate and powerful initial bond. ■■ ■■

■■

Provides excellent adhesion with wood, plastics, metal, fabrics, cardboard, and paper. Useful at home as well as in the furniture, automotive and packaging industry and general construction. Using the primer when installing vapour and wind barrier tapes helps achieve a quick and reliable bond. Priming substrates ensures a long-lasting and immediate bond for vapour and wind barrier tapes with both porous and non-porous surfaces. The primer is suitable for various construction surfaces, such as concrete, gas concrete, silicate, rendering, masonry, metal, wood, wood chipboard and glass. Can be used at low temperatures.

Colour Package 500 ml aerosol dispenser, 12 pcs per box.

Fields of application

Application conditions

■■ Bonding different surfaces during hobbies or repairs. ■■ Bonding different surfaces in furniture, automotive and packaging industries. ■■ Installing vapour and wind barrier tapes.

■■ Application temperature range: from -5 °C to +35 °C. ■■ Surfaces must be dry and free of dirt, dust, oil and loose particles.

adhesives │ construction adhesives PENOSIL Premium Prime&Fix

Application limitations ■■ Not suitable for bonding PVC or PVC-coated materials. ■■ Not suitable for EPS, XPS, polystyrene, bitumen, or Teflon surfaces.

Technical data Properties

Value

Base substance

synthetic rubber

Viscosity

sprayable

Specific gravity

0,73-0,77 aerosol

Solvents

chlorocarbons

Dry matter content

15-20%

Flammability

highly flammable

Resistance to chemicals

moisture, dilute acids, alkalis and oil

The above parameters have been measured under the following conditions: temperature 23 °C and 50% relative humidity.

Cleaning Remove the residue immediately using White Spirit solvent.

Storage Guaranteed storage time 12 months starting from the date of manufacture if stored in a closed original package in a dry place between +4 °C and +25 °C. Do not store near an open fire or an active source of heat.

Safety requirements Avoid contact with skin and eyes. If the product gets into your eyes, rinse them with plenty of water immediately and see a doctor. Repeated exposure can cause dry or cracked skin. Vapours can cause drowsiness and dizziness. Keep out of the reach of children!

Application instructions The substrate must be dry and clean; if necessary, remove any grease, oil, dust and loose particles. Before use, shake the dispenser well at least 30 times. Spray the primer on the substrate from 5-10 cm away in a thin layer. Bonding: After covering the surfaces with adhesive, wait 15–60 seconds, then press the surfaces together. Depending on the substrate, total drying time can be up to 20 minutes. If the adhesive is not used within the next 24 hours, turn the aerosol can upside down and press the applicator a few times to clean out residue. 500 ml is enough to bond about 2 m² of material. For contact bonding, spray the adhesive on both surfaces to be bonded. Using as a primer: Let the primer rest for 15-60 seconds before applying the vapour or wind barrier tape. Use a pressure roller on the tape to achieve an optimal bond. The primer can take up to 20 minutes to dry completely, depending on the substrate. If the primer is not used within the next 24 h, invert the aerosol dispenser and press the applicator a couple of times to clean it of residue. 500 ml is enough to prime about 100 m of vapour or wind barrier tape surfaces at a width of 5-10 cm.

SURFACE TREATMENTS │ PRIMERS PENOSIL Premium BetPrimer

Adherence dispersion for priming concrete surfaces before smoothing with concrete or other floor levelling mixture, or covering with ceramic plates, wallpaper, paint or any other finishing material.

■■

■■ ■■ ■■ ■■

Ensures good adherence on all concrete, brick and plaster surfaces, natural stone, as well as on plasterboard, building boards for wet rooms, waterproof plywood and wood. Dries quickly. Resistant to shifts in wet rooms. Easily usable. Water-based, does not smell or contain harmful compounds.

Colour Package ■■1 L plastic bottle, ■■3 L, 10 L, 25 L canisters.

Field of application

Application conditions

■■ Priming various substrates (concrete, mortar, wood, boards) before covering with levelling mixture in order to improve adhesion indoors and outdoors. ■■ Improving adherence of porous wall and ceiling surfaces before covering with wallpaper, paint, roll material or any other finishing material. ■■ Reinforcing weak surfaces such as lime surfaces.

■■ Application temperature +10 °С to +30 °С. ■■ Substrate moisture: wood 8-12%; concrete <90%. ■■ Suitable tools are paint-brush, soft brush or felt spatula. ■■ Consumption depending on surface and dilution level 0,02 – 0,07 l/m2.

SURFACE TREATMENTS │ PRIMERS PENOSIL Premium BetPrimer

Technical specification PROPERTY

UNIT

VALUE

Curing speed

hour

1-3

Density

g/cm³

1,04

pH Movement capability

7/5-8/5 %

Cleaning ■■ Clean tools and work wear immediately with water. PENOSIL Premium Cleaning Wipes can be used for cleaning skin; if possible, wash with water and soap, and apply a cream. ■■ Dried product can only be removed mechanically.

SAFETY REQUIREMENTS Avoid contact with skin. Wear suitable gloves. Keep out of the reach of children.

approx. 25

Application instruction Clean the surfaces from dust, grease, oil and loose particles. Polish the floor, if required. Dilute Premium BetPrimer with water (1:3 to 1:10) when using on floors, and 1:10 when using on walls and ceilings. Use concentrate on non-absorbent substrates and old boarded floors. For reinforcing weak surfaces, use the dilution ration 1:15 to 1:20. Apply in thin and even layer by using a soft brush, paintbrush or felt spatula. No accumulated adhesion dispersion can be left on the surface. Concrete or levelling mixture can be applied directly on the moist adhesion dispersion. In the case of non-absorbent surfaces or substrates containing old adhesive remains, the primer should dry for about 2 hours before covering with levelling mixture. The floor should be levelled not later than 24 hours after priming. In the case of parquets glued on substrate as well as floor heating, the cement milk and other substances affecting adhesion (e.g. old glue remains) should be completely removed. Only the areas to be levelled should be primed.

Storage Guaranteed storage time 24 months starting from the date of manufacture if stored in a closed original package in a dry place between +3 °С and +25 °С. Avoid freezing.

SURFACE TREATMENTS │ SURFACE PROTECTION PRODUCTS

PENOSIL Premium DustProofer

Solution that makes the concrete surface strong and dust free. Increases durability of concrete floors, makes the floors dust free and resistant to chemicals.

Makes the concrete surface evenly dense. ■■ Avoids oil getting into concrete and makes the maintenance easier. ■■ Can be easily applied with a brush. ■■ Water-based, does not contain harmful compounds. ■■

Colour Package 5 L, 10 L, 20 L metal containers.

Field of application

Application conditions

■■ Improving durability and making concrete floors in industrial or warehouse buildings dust free. ■■ Making concrete floors in garages, workshops and warehouses resistant to chemicals, including oil.

■■ Application temperature +5 °С to +25 °С. ■■ New concrete surfaces have to cure for at least 21 days (+23 °C, 50 % RH) before impregnation. ■■ Suitable tools are paintbrush or soft brush. ■■ Product consumption in three-layer application amounts to 0.5 l/m²; the consumption depends on concrete quality and porosity.

Usage limitations ■■ Not suitable for reinforcing natural surfaces (lime, sandstone).

SURFACE TREATMENTS │ SURFACE PROTECTION PRODUCTS

PENOSIL Premium DustProofer

Technical specification PROPERTY

UNIT

VALUE

Final curing

hour

Density

g/cm³

1,2

10-11

Application instruction In order to achieve the best results, the concrete surface should be polished beforehand. Clean the surface with a vacuum before treatment. Treat the surface in three steps: 1. Mix 1 part of solution with 2 parts of water (1:2) and apply to concrete with a soft brush. The solution should be applied generously in order to allow it to absorb deep into the concrete. Let it dry for 40-60 minutes and remove excess solution with a brush or a cloth.

Cleaning Wash tools with water; remove stains from clothes immediately with detergent and water. PENOSIL Premium Cleaning Wipes can be used for cleaning skin; if possible, wash with water and soap. Dried product can only be removed mechanically.

2. Mix the solution with water 1:1 and apply to concrete as before. Let dry for 40-60 minutes and remove excess solution. 3. Mix 2 parts of solution with 1 part of water (2:1) and apply to concrete as before. Let dry for 40-60 minutes and remove excess solution. Removing excess solution is very important; otherwise white spots may occur in places where unabsorbed solution was not removed. The three surface treatment steps are made in series by leaving at least an hour between the steps. Final curing 24 hours.

SAFETY REQUIREMENTS Do not breathe in vapour. Irritating to eyes and skin. In the case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Wear suitable safety clothing, gloves and eye or face protection. If swallowed, seek medical advice immediately and show this container or label. Keep out of the reach of children.

Storage Guaranteed storage time 36 months starting from the date of manufacture if stored in a closed original package in a dry place between +5 °C and +30 °C. Avoid freezing.

SURFACE TREATMENTS │ SURFACE PROTECTION PRODUCTS

PENOSIL Premium WaterSil

Impregnation liquid with silane for stone surfaces. After absorbing deep into material pores and drying within a few days, it forms a water repellent surface lasting for 5-10 years.

■■ ■■ ■■ ■■ ■■ ■■

Suitable for indoors and outdoors. Does not affect the breathability of material. Suitable for natural stone, brick, concrete, light concrete and plaster surfaces. Thanks to water-repellence of the treated surface, the heat-proofness of the wall improves. Ready for use. Water-based, does not contain harmful compounds.

Colour Package ■■1 L plastic bottle, ■■3 L, 10 L plastic canisters.

Field of application

Application conditions

■■ Impregnation of natural stone, brick, concrete and plaster surfaces.

■■ Application temperature +5 °С to +25 °С. ■■ Air humidity during application not exceeding 80%.

SURFACE TREATMENTS │ SURFACE PROTECTION PRODUCTS

PENOSIL Premium WaterSil

Technical specification PROPERTY

UNIT

VALUE

Tack free (+22˚ C)

hour

Final curing

hour

Density

g/cm³

0,98

pH Reduction of water ingress

10-11 %

Cleaning Contaminated tools and surfaces should be immediately cleaned with soap water. The product leaves visible traces on dense surfaces such as glass, metal, paint. Cured and polymerised impregnation product can only be removed mechanically.

SAFETY REQUIREMENTS Wear safety glasses and gloves. Keep out of the reach of children.

Application instruction Remove dirt, oil, grease, organic residues and cement milk, old paints, etc. from the stone surface to be treated, in order to avoid reduction of absorbability. If needed, use a wet blaster or pressure cleaner. In order to achieve the best results, clean the surfaces even if there is no visible dirt, and let the surface dry completely. All improvements made with the mixture in substrate have to dry sufficiently. Cover windows, doors and other wooden and metal surfaces before starting the work. Shake well before use. Apply to substrate with a low pressure sprayer (e.g. garden sprayer) from the bottom to the top. You can also use a brush or a roller. The surface has to be saturated with liquid. Apply the whole material in a single work cycle. Consumption rate: 1-5 m²/l (i.e. 0.2-1 l/m²) – depending on the absorbability of the substrate. The result will be visible as water drop effect in two days.

Storage Guaranteed storage time 24 months starting from the date of manufacture if stored in a closed original package in a dry place between +5 °C and +35 °C. Avoid freezing.

SURFACE TREATMENTS │ EPOXY COATINGS PENOSIL Premium BathCoating

A water-based epoxy paint set for restoring cast iron bathtubs and other enamel surfaces. The set includes a primer and primer activator, paint and paint activator, 2 mixing sticks, plastic gloves, sandpaper for roughening the substrate, 2 foam rollers, a handle for the paint roller and application instructions. ■■ ■■ ■■ ■■ ■■ ■■ ■■

Water-based epoxy enamel paint, odourless. The dried paint is hygienic, contact with food is permitted. Environmentally friendly. Bacteria and mould resistant. The set contains everything needed for restoring a cast iron bathtub. The painting process consists of 2 stages. The bathtub is ready to be used 7 days after painting.

Colour The basic colour shade is white. For tinting add water-soluble tinting paste to the primer as well as to the paint.

Package The cardboard box contains ■■a primer and primer activator ■■paint and paint activator ■■2 mixing sticks ■■plastic gloves ■■sandpaper for roughening the substrate ■■2 foam rollers, a handle of the paint roller ■■application instructions. One package is sufficient for priming and painting one bathtub..

Field of application

Usage restrictions

■■ Restoring cast iron bathtubs.

■■ Not suitable for metal or plastic bathtubs. ■■ The use of paints containing highly active colorants (hair and yarn dyes) can cause a permanent change in the enamel coating of the epoxy-coated bathtub.

Application conditions ■■ Application temperature between +10 °С and +30 °С. ■■ Drying temperature not less than +20 °С. ■■ Air humidity <80%. ■■ Working time after mixing the paint with an activator is approx. 1 hour. ■■ Suitable tools are a foam paint roller or a high-quality brush.

SURFACE TREATMENTS │ EPOXY COATINGS PENOSIL Premium BathCoating

Technical specification PROPERTY

UNIT

VALUE

Working time

minute

Drying speed (one layer)

hour

12-24

Mechanical strength

24 h

Chemical resistance

24 h

5-7

Density: paint + activator

g/cm3

1,36

Impact resistance

3,75

Wash resistance

cycle

>10 000

Scratch resistance

2,3

Tensile strength

kg/cm3

Temperature resistance

°C

+120

The above parameters have been measured under the following conditions: temperature 23 °C and 50% relative humidity.

Cleaning ■■ Wash the tools and work wear with soap and water immediately after use. PENOSIL Premium Cleaning Wipes can be used for cleaning skin; if possible, wash with water and soap, and apply a cream. ■■ Dried product can only be cleaned with a xylene-based solvent.

SAFETY REQUIREMENTS Contains polyethylene glycol (<0,2%). Irritating to eyes, respiratory system and skin. Wear suitable gloves and eye/face protection. In case of contact with eyes rinse immediately with plenty of water and seek medical advice. Keep out of reach of children.

Application instruction Remove dirt, grease and dust from the surface of the bathtub. Roughen the surface of the bathtub with the coarse sandpaper included in the set. Do not start painting before the surface is clean and dry. It is recommended to cover the mixer, the drain and the edges of the bathtub with masking tape. In case there is no enamel in some areas of the bathtub, even the surface with epoxy filler, for instance Penosil Premium FastFix Epoxy. If needed filled areas shall be grinded so that the entire surface of the bathtub is even. PRIMING Mix the primer and the primer activator thoroughly. When applying, pour some primer on the bottom of the bathtub – in such a way there is no need for a special tray. It is best done with a foam roller or a high-quality brush. Painting the bathtub may be started 12 to 24 hours after priming. PAINTING Before applying the enamel coating, perform the intermediate grinding of the surface of the primer and clean dust from the primed surface of the bathtub. Mix the paint and the paint activator thoroughly. For painting use a foam roller or a high-quality brush. The most convenient work method is to pour paint in portions on the bottom of the bathtub. The bathtub will be ready for use in 7 days (drying temperature above +20 °C, air humidity up to 80%). Using the bathtub sooner may cause a permanent change in the enamel coating. Before the first use, clean the bathtub surface with soap and water.

Storage Guaranteed storage time 24 months starting from the date of manufacture if stored in a closed original package in a dry place between +3 °C and +25 °C. Avoid freezing.

CLEANERS PENOSIL Premium CLEANING WIPES

Big industrial cleaning wipes for the removal of paint, adhesive, oil, construction foam, sealant and other stains from hands, tools and other surfaces.

Efficiently dissolves and cleans the residues of construction chemistry from hands, tools, clothes, adjacent surfaces. ■■ Dissolves and cleans oils and lubricants from hands, tools, clothes and various surfaces. ■■ Refershes and cleans old paint surfaces and connection joints. ■■

COLOUR PACKAGE Plastic pot, 50 wipes 15,6x21,3 cm in the pot, 6 pots in the box

Field of application

Application conditions

■■ Cleaning of hands, tools and surfaces from paint, uncured construction foam, silicone, adhesive, putty, etc. ■■ Cleaning of oil, soot, lubricating grease, permanent marker, and impurities. ■■ Cleaning and refreshing of old painted surfaces and connection joints.

■■ Usage temperature between +5 °C and +30 °C. ■■ For better results remove all stains immediately. ■■ Close the pot tightly every time after use.

CLEANERS PENOSIL Premium CLEANING WIPES

Application instruction

Usage restrictions ■■ Before using the product, test its suitability in a hidden area. ■■ Not suitable for some plastics, delicate surfaces and textiles as it may remove or bleach colour.

Technical specification PROPERTY

UNIT

VALUE 5,5 ± 0,2

Volatile organic compounds

SAFETY REQUIREMENTS Keep out of the reach of children. Keep out of heat sources and open flame. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice if symptoms persist. Contains D-limonene that may cause allergic reaction.

To open, pull the cover of the put off , remove the foil insulation , and pull the top end of the wipe from the middle of the roll by guiding it through the opening in the cover. Place the cover back to the pot and tear off the wipe from the perforated area . Leave the end of the next wipe in the plug and close tightly. On a small package, open the selfadhering closure, pull the cleaning wipe out and close the opening tightly. In order to soften paint stains, place the wipe for a few minutes on the stain and rub off the stain.

Storage Storage time 24 months when stored in a closed package and dry places at temperatures +5 to +30 °C.

CLEANERS PENOSIL Premium FOAM CLEANER

Special cleaning spray for the removal of construction foam from tools and surfaces.

Efficiently cleans uncured construction foam from foam gun, clothes, adjacent surfaces. ■■ Suitable for immediate cleaning of a foam gun from inside after use. ■■

COLOUR PACKAGE 650 ml aerosol can, content 500 ml, 12 cans in a box

Field of application

Application conditions

■■ Cleaning of foam gun after use both inside and outside. ■■ Cleaning of clothes and tools from uncured construction foam. ■■ Cleaning of window frames, window sills, doors, jambs, etc. From uncured construction foam during work.

■■ Usage temperature between -10 °C and +30 °C.

CLEANERS PENOSIL Premium FOAM CLEANER

Application instruction

Usage restrictions ■■ Not suitable for the removal of cured foam.

Technical specification Solvent: Acetone Propellant: Dimethyl ether

Cleaning Cover with inert absorbent (e.g. sand). Collect and place in a suitable container or let vaporize.

Shake before use and remove the cap from valve . Fix the supplied sprayer to valve and spray on the removable foam . Finally clean the surface with a soft tissue or with PENOSIL Premium Cleaning Wipes . In order to clean foam gun from outside, spray the cleaner on the removable foam and let the cleaner drip to waste container. In order to clean foam gun from inside, connect the container of the cleaning agent with the gun , by holding the gun handle with one hand and turning the upright container with the other hand. Make sure that the gun is not pointed to persons when turning it. Only after connection turn the container together with the gun in the working position, i.e. upside down. Shake the container well and clean the gun by pressing the trigger , until there is no foam in the outcoming cleaning agent. Handle with special care as the cleaner contains inflammable gas.

SAFETY REQUIREMENTS Cleaner is inflammable and combustible. Only use in well ventilated rooms, avoid smoking and static electricity. Vapours may cause dizziness or vertigo. Avoid contact with skin and eyes. Keep out of the reach of children.

Storage Guaranteed storage time 12 months starting from the date of manufacture if stored in a closed original package in a dry place between +5 °C and +30 °C, avoid freezing.

CLEANERS PENOSIL Premium FOAM REMOVER

Special cleaning spray for the removal of cured construction foam from tools and surfaces. Softens cured foam so that it can be removed mechanically. ■■ Strong solvent, dissolves in addition to construction foam also different surface treatment like lacquer and paints. ■■

COLOUR PACKAGE 520 ml aerosol can, content 340 ml, 12 cans in a box

Field of application

Application conditions

■■ Cleaning of tools and adjacent surfaces from cured construction foam. ■■ Cleaning of window frames, window sills, doors, jambs, etc. from cured construction foam during work.

■■ Usage temperature between +5 °C and +30 °C. ■■ Test the suitability of solvent on the substrate before use, danger of damaging surfaces.

CLEANERS PENOSIL Premium FOAM REMOVER

Application instruction

Technical specification Ingredients: N-methyl-2-pyrrolidone > 50% Propan/buthan 25%

Cleaning Cover with inert absorbent (e.g. sand). Collect and place in a suitable container or let vaporize.

SAFETY REQUIREMENTS Cleaner is inflammable and combustible. Only use in well ventilated rooms, avoid smoking and static electricity. Do not spray near flames or heat sources in work. In case of fire, avoid inhaling toxic gases released during the fire. Keep out of the reach of children. Avoid contact with skin and eyes.

Shake before use and remove the cap from valve . Fix the supplied sprayer to valve . and spray on the removable cured foam . Try to not spray on adjacent surfaces as the solvent dissolves various coatings (varnishes, paints). Let the solvent work for 5-10 minutes , then remove the softened foam mechanically . Repeat the process if needed. Finally clean the surface with a moist tissue or with PENOSIL Premium Cleaning Wipes. Handle with special care as the can contains inflammable gas.

5–10 min

Storage Guaranteed storage time 12 months starting from the date of manufacture if stored in a closed original package in a dry place between +5 °C and +30 °C, avoid freezing.

CLEANERS PENOSIL Premium Silicone Remover

Special cleaning agent for cured and liquid silicone for the removal of silicone from various surfaces. Especially recommended in places where optimum preparation of the surface is required before refilling the joints with silicone sealants.

■■ ■■

■■

■■ ■■

Efficiently softens both cured and uncured silicone. Does not spread, can be used both on vertical and horizontal surfaces, and on the lower surfaces of structures. Can be used on various surfaces such as glass, concrete, enamel, tiles, wood, plastics, bricks, plaster, and various textiles. Removes fungicidal damages from old joints and improves the hermetic qualities of joints. Recommended for renovation and repair works.

COLOUR PACKAGE 310 ml cartridge, 12 cartridges in box.

Field of application

Application conditions

■■ Removal of silicone during repair and renovation works. ■■ Cleaning and preparation of old joint surface before filling it with silicone.

■■ Usage temperature between +5 °C and +30 °C.

CLEANERS PENOSIL Premium Silicone Remover

Cleaning Cover with inert absorbent (e.g. sand). Collect and place in a suitable container or let vaporize.

Technical specification PROPERTY

UNIT

VALUE

Appearance

light grainy paste

Specific weight g/cm3

0,89

Flowability

paste-like

recommendation Cartridge gun PENOSIL Sealant Manual Gun.

SAFETY REQUIREMENTS The product is corrosive. Wear gloves and eye or face protection. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Keep out of the reach of children.

Application instruction Cleaning of joints from cured silicone: mechanically remove as much old sealing agent from a joint as possible. Fill the joint with silicone remover. Thickness of silicone remover in the joint should be 2-3 higher than the thickness of the remained old sealant, however not more than 4 mm. Let the silicone remover work on old sealant for at least 24 hours. In 24 h remove the silicone remover from the joint and clean the surface with sponge and water. Should the sealant layer be very thick, the procedure should be repeated. The working time can vary from one to 24 h, depending of surface type and thickness of sealant. For textiles, this time should preferably not exceed 30 minutes in order to avoid stains.

Storage Guaranteed storage time 12 months starting from the date of manufacture if stored in a closed original package in a dry place between +5 °C and +30 °C. During storage, the substance may cake or the colour may change. This does not affect product qualities.

Filled with quality! penosil.com