How To Check Air Ducts For Leaks?

What Are The Steps To Inspect Your Air Ducts For Leaks?

Air ducts contribute significantly to maintaining a comfortable home ambiance since they’re responsible for circulating fresh air from your HVAC unit to each room. However, if you abruptly notice a spark in your energy bills in the peak of summer or wintertime, the issue might be deep inside your air duct's framework. Leaking air ducts can trigger numerous problems, ranging from decreased energy efficiency to poor indoor air quality.

Air ducts leaking water may put a burden not just on your HVAC system but also on your budget.

This article demonstrates how to identify air duct leaks in your house so that you may get them repaired instantly by the best air duct cleaning Lincoln professionals and save money on your air conditioning expenses.

Telltale Signs Of Leaking Air Ducts 

Increased Utility Bills:

Discovering your power costs have suddenly increased for no apparent reason is an alarming sign. Ducts may acquire holes and gaps over time, resulting in air loss and making your HVAC system work harder for an extended period, raising energy expenses. 

Dustier Home Than Usual: While a certain amount of dust is acceptable in a house, if you start feeling dust granules on your skin and your home air seems dusty, leaking ductwork may be to blame. Air leaks cause dust particles to enter the ductwork, enabling them to circulate throughout your home.



Temperature Instability In A House: Duct leakage permits hot or cooled air to escape. Since the air isn't reaching its intended place, your HVAC system struggles to obtain the proper settings. If all else fails, check your ducts for any gaps or holes.

How To Identify Leaks In Your Ductwork Detecting leaks in your ducting may be complex and daunting, but it does not have to be.

Contacting your local HVAC technician is the best approach to determine whether or not your air ducts are leaking. Also, performing the periodic air duct inspection is beneficial, assuring your HVAC system's optimal functioning. 

Ductwork Inspection: Getting an examination from a reputable HVAC firm is the first step in locating leaks in your ductwork. While inspecting, they'll carefully scrutinize the ducting for noticeable rips or loose fittings. The professionals will then note all the problem areas with a grease pencil to repair them after the inspection.



Turn On Your HVAC System: Turning your HVAC system on high settings might help you detect less evident leaks. To find the leak source, the professionals will use a smoke pencil. When the flame starts twirling in an unusual pattern, they'll mark the spot using a grease pencil for its repair once they complete the ducting inspection.



Inspect the Duct Joints: One of the most typical areas for leaks to develop is where two air ducts meet. Since these joints bear most of the load, they are prone to wear down faster than other places. To

detect the leak, consider placing your hand near the joints. If you feel air escaping through a hole, it indicates leaking. Sometimes the rupture is significant, and air flows from it with such power that it seems like a stream gushing out of the joint. 

Check Old Duct Tape: If you find old duct tape when examining your ducts, it was most likely utilized to cover up a leak. Although duct tape can temporarily cure the leakage problem, it isn't a long-term solution. You might need to replace the duct tape. However, the ideal method would be to repair it with mastic sealant.

Wrapping Up Finding and sealing is the foremost and vital step in keeping your house energy-efficient and pleasant. The above-cited steps can help you detect air duct leaks. Preventative maintenance of your air ducts ensures their optimal working and avoids further duct leaking. *****************************************Source***************************************** https://bignewstime.com/what-are-the-steps-to-inspect-your-air-ducts-for-leaks/