KEITH LECLAIR
SELECTED WORKS
FEATURED PROJECTS
COMPREHENSIVE STUDIO M.arch1 Thesis 3 Cities C.O.E. Furniture Design Competition Digital Media Hand Sketches
GRADUATE COMPREHENSIVE STUDIO Professor Art McDonald Professor Bess Kreitemeyer Marini - Leclair - Miles
Extended Outdoor Auditorium
Stadium Seating/Outdoor Screening
Multi-Level Lecture Space
Exhibition/ Fabrication Space
SECTION 3
SKYLIGHT 79’ 0”
PARAPET 68’ 0”
ROOF 65’ 0”
L4
50’ 0”
L3
35’ 0”
L2
20’ 0”
L1
5’ 0”
BG
-10’ 0”
Cooling Mode
SKYLIGHT 79’ 0”
PARAPET 68’ 0”
ROOF 65’ 0”
L4
50’ 0”
L3
35’ 0”
L2
20’ 0”
L1
5’ 0”
Heating Mode
Recirculation Mode SECTION A-A
SKYLIGHT
SECTION A-A
SKYLIGHT
79’ 0”
79’ 0”
PARAPET
PARAPET
68’ 0”
68’ 0”
ROOF
ROOF
65’ 0”
65’ 0”
Radiant Tubing
Supply Return Air Handler
Radiant Tubing
L4
L4
L3
L3
L2
L2
L1
L1
50’ 0”
35’ 0”
20’ 0”
5’ 0”
50’ 0”
35’ 0”
20’ 0”
5’ 0”
Supply Return Air Handler
ZONE 2a: Laboratories Laboratories are placed on the northern side of the building to minimize heat gain and allow for the number of bodies and mechanical equipment being run to heat the spaces. Forced air is brought up from the basement through a chase and returned back to the basement along the same route.
Venting Skylight The skylight vents air out the top of the building and provides is located on the roof to draw air out but the strong winds from the west should draw air out the top of the atrium space and allow fresh air to enter from below grade.
ZONE 1: Connective Tissue The large atrium space within the center of the building is primarily conditioned by passive heating and cooling. Air is pulled into the basement from windows which are located low to the ground. Air is then treated either by radiant heat transmitted through the curtain wall and stored in the
ventilation system. Air is pumped up from the basement naturally ventilated thorough a transom window above the door.
higher than usual.
ZONE 3: Auditorium / Flex Space
window at the top of the space. The window can be sealed to recycle some of the air through a return duct which will recondition the air and return it to the space.
Screen & Frit The screen along the curtain wall breaks away to reveal views to the outside and allow more direct light into the space. The fritting becomes denser where the screen breaks away to minimize heat gain and provide a smiliar luminance level through the southern facade.
3’ Parapet
Roof + 65’
1.25” Glass Railing
Level 04 24” Concrete Column
+ 50’
12” Concrete Column 10” Concrete Slab Typ.
Anchor Service Deck
Level 03 Screen Mounting Bracket
+ 35’
1” Perforated Metal Screen
Extruded Alum. Track Mullion
Glazing Gasket
Level 02 + 20’
2” Double Pane Fritted Glass Unit
Cermaic Frit
1” Metal Panel
Level 01 + 5’ Grade + 0’
Vapor Barrier Insulation Sand
Level B1 - 10’
Compact Gravel
The material characteristics of industrial hemp make it a viable resource for sustainable building. However stigmas and legalites surrounding hemp have limited its development to basic material replacements. This project explored the physical properties of hemp fiber to develop hypotheses regarding its architectural potential. The Hemp fibers, offer tensile strength, resistence to moisture, and mold, as well as having a net-zero environmental impact, thus, posing an interesting conversation for the future of building. In this proposal the fibers are utilized for their absorbtive, durable, and temperature lenient characteristics. In each of the Fiber-Climate types developed, the hemp composite aims to create a specific micro-climate influencing interior conditions; humidity, temperature and exposure. Utilizing hemp fiber as structural reinforcing, moisture retention, and for its rough aesthetic positions the proposal within the scope of an intrinsically hemp architecture.
Fiber-Climates
The material characteristics of industrial hemp make it a viable resource for sustainable building. However stigmas and legalites surrounding hemp have limited its development to basic material replacements. This project explored the physical properties of hemp fiber to develop hypotheses regarding its architectural potential. The Hemp fibers, offer tensile strength, resistence to moisture, and mold, as well as having a net-zero environmental impact, thus, posing an interesting conversation for the future of building. In this proposal the fibers are utilized for their absorbtive, durable, and temperature lenient characteristics. In each of the Fiber-Climate types developed, the hemp composite aims to create a specific micro-climate influencing interior conditions; humidity, temperature and exposure. Utilizing hemp fiber as structural reinforcing, moisture retention, and for its rough aesthetic positions the proposal within the scope of an intrinsically hemp architecture.
Fifth Creek Hot Springs Diamond Fork, UT N 1�=100’
3 - Arial Crane Air-lifts frame to the site.
2 - Pre-Fab Formwork A frame is constructed off-site that will be used to organize the hemp fibers and as form-work for the concrete shell.
1 - Foundation Site poured concrete smooths and preps the area for construction.
4 - Setting Form People on the ground help set and secure the frame/formwork. 5 - Hemp Cordage The hemp fiber is coated in a resin on the areas that will be inbedded in the concrete to prevent cracking due to expansion and contraction.
6 - Shotcrete Shell Next the entire assembly (excluding openings)is covered in concrete on-site at the remote location. Once cured the frame and formwork can be disassembled and removed.
7 - Formwork Removal Finally, the frame is disassembled and removed from the interior leaving thehemp/concrete composite.
C1 -
The domed shape and materials work together to trap the heat and moisture from the hot spring. The hemp functions both to hold moisture as well as insulate the shell. The concrete traps the vapor while providing some thermal mass.
C2 -
Here the shape allows the rising hot vapor to escape, however, the protection from the wind allows the space to maintain a high temperature extending the desirable bathing months into the winter.
C3 -
This climate differs from the others, allowing the air to cross through the space, leaving bathers warm in the water while providing a refreshing air current above. Evaporative cooling provided by the passing the hemp allows the space to be comfortable into the warmer months.
B b
A a
C1 C0 Site Plan 1/16”=1’
N
C1
Section b-B Sections 1/16”=1’
C0
Section a-A
D B C2
c
d
C3
C2
C3
Section d-D
C2
Section c-C
WATER TOWER
HOTEL
tto
ro
G
WATER TOWER
tto
ro
G
HOTEL
TH BA
TH BA
Exploded Axon of Security Desk Scale 1.5”=1’
COE Furniture Proposal: SECURITY DESK Gabriel Boyajian + Keith LeClair
Axon of Security Desk (Employee View) Scale 1.5”=1’
Axon of Security Desk (Pedestrian View) Scale 1.5”=1’
Exploded Axon of Podium Scale 2.5”=1’
COE Furniture Proposal: PODIUM Gabriel Boyajian + Keith LeClair
Axon of Podium (Crowd View) Scale 2.5”=1’
Axon of Podium (Speaker View) Scale 2.5”=1’
Exploded Axon of Lobby Bench Scale 2.5”=1’
COE Furniture Proposal: LOBBY BENCH Gabriel Boyajian + Keith LeClair
Axon of Lobby Bench (Left Side View) Scale 2.5”=1’
Axon of Lobby Bench (Right Side View) Scale 2.5”=1’
Exploded Axon of Electronics Cabinet Scale 1.5”=1’
COE Furniture Proposal: ELECTRONICS CABINET Gabriel Boyajian + Keith LeClair
Axon of Electronics Cabinet (Front View) Scale 1.5”=1’
Axon of Electronics Cabinet (Rear View) Scale 1.5”=1’
LECLAIRKEITH CONTACT KTHLEC@GMAIL.COM 802.598.1619 ISSUU.COM/KLECLAIR
EDUCATION SYRACUSE UNIVERSITY SCHOOL OF ARCHITECTURE SYRACUSE, NY MArch1 - 2016
UNIVERSITY OF UTAH SCHOOL OF ARCHITECTURE
SALT LAKE CITY, UT BS ARCHITECTURAL STUDIES - 2013
BURLINGTON TECHNICAL CENTER PRINCIPALS OF ENGINEERING, ARCHITECTURE & CONSTRUCTION BURLINGTON, VT CERTIFIED AUTOCAD DRAFTER - 2006
SKILLS
SOFTWARE
CONCEPTUAL DESIGN DIGITAL/PHYSICAL MODELING MATERIALS RESEARCH SKETCHING PAINTING WOOD WORKING LASER CUTTING 3D PRINTING PLOTTING
REVIT RHINO LADYBUG GRASSHOPPER AUTOCAD PHOTOSHOP ILLUSTRATOR INDESIGN
EXPERIENCE ARCHITECTURAL CONSULTANT - 2014 601 TULLY - SYRACUSE, NY - MAINTAINED COMMUNITY SPACE (ART GALLERY & GARDEN) - DESIGN ADVISOR FOR SELECT ART PROJECTS - DESIGNED INTERIOR LAYOUT FOR REALLOCATION OF USE - ARRANGED GARDEN SEATING LAYOUT - MATERIAL RESEARCH FOR ART APPLICATIONS
LUMBERYARD ASSOCIATE/LIFT OPERATOR - 2014 LOWE’S - SOUTH BURLINGTON, VT - GREETED/ASSISTED CUSTOMERS -ACCURATELY PROVIDED PRODUCT INFROMATION -CAREFULLY & EFFICIENTLY OPERATED HEAVY MACHINERY
3D STUDIO MAX SKETCHUP ECOTECT VASARI ARCGIS CLIMATE CONSULTANT WORD POWERPOINT EXCEL
Exploded Axon of Podium Scale 2.5”=1’
Axon of Podium (Crowd View) Scale 2.5”=1’
AWARDS COE FURNITURE DESIGN COMPETITION - W/ GABRIEL BOYAJIAN NORWICH UNIVERSITY SHOWCASE COMPETITION - SCHOLARSHIP SYRACUSE UNIVERSITY ALUMNI APPRECIATION - 3D PRINT COMPETITION
COE Furniture Proposal: PODIUM Gabriel Boyajian + Keith LeClair
Axon of Podium (Speaker View) Scale 2.5”=1’