*Kirlin's Vandal Resistant and Maximum Security Lighting Catalog 07VR

Bulletin 07VR

Energy Efficient Vandal Resistant & Maximum Security Lighting

Compact Fluorescent • Metal Halide • LED • Incandescent Recessed, Surface and Cornice Mounted Downlights • NightLights & MarkerLights

Table of Contents - Page 1 of 2

Since 1895

Catalog Introduction & Product Features

2

Products: Specifications, Performance and Options

4 - 36

Kirlin Energy Efficiency & Performance

3

Hallmarks of Kirlin Quality / Photometric Definitions

37

Description

Lamp Position

Maximum Wattage

Horizontal Horizontal

1 Triple 32 1 Triple 42

7" 8"

VRR-07001 VRR-08002

4

Horizontal Horizontal

1 Triple 32 1 Triple 42

10" 10"

VRR-10003 VRR-10004

5

Horizontal Horizontal

1 Triple 57 1 Triple 70

10" 12"

VRR-10005 VRR-12006

6

Horizontal

1 PL-H 60

12"

VRR-12007

7

Horizontal Horizontal

2 Triple 32 2 Triple 32

10" 12"

VRR-10008 VRR-12009

8

Horizontal Horizontal

2 Triple 42 3 Triple 42

12" 12"

VRR-12010 VRR-12011

9

COMPACT FLUORESCENT Recessed Round Downlight - Type IC

1.9928 x 1.0313 Downlight

* Size: Indicates nominal aperture of trim for recessed fixtures and housing size (width x height) for surface and wall bracket fixtures.

Product Number

Page

Vandal Resistant

Recessed Round - Sealed & Gasketed

1.3918 x 1.0313

Nominal Size*

Vandal Resistant

Downlight - Type IC / AT

Horizontal Horizontal

1 Triple 32 1 Triple 42

7" 8"

VRR-07012 VRR-08013

10

Downlight - Type IC / AT Downlight - AT

Horizontal Horizontal

1 Triple 42 1 Triple 57

10" 10"

VRR-10014 VRR-10015

11

Downlight - AT

Horizontal

2 Triple 32

10"

VRR-10016

12

Horizontal Horizontal

2 Triple 32 2 Triple 42

12" 12"

VRR-12017 VRR-12018

13

Recessed Round - Concrete Pour

Vandal Resistant

.6875 x 1.0313 Horizontal Horizontal

1 Triple 57 2 Triple 32

Downlight

Horizontal

1 Triple 70

12"

VSR-12021

15

Horizontal Horizontal

2 Triple 32 2 Triple 42

12" 12"

VSR-12022 VSR-12023

16

Downlight - Flat Lens Downlight - Drop Lens

Horizontal Horizontal

2 Triple 42 2 Triple 42

1' x 1' 1' x 1'

VRS-12024 VRS-12025

17

Downlight - Flat Lens Downlight - Drop Lens

Horizontal Horizontal

2 Triple 57 2 Triple 57

1' x 1' 1' x 1'

VRS-12026 VRS-12027

18

Surface Round .7148 x 1.0313

.5323 x 1.0313

Maximum Security

Recessed Rectangle Downlight

Maximum Security Horizontal

Surface Square .9283 x 1.0313

.5304 x 1.0313

2 T8 32

1' x 4'

VRT-12028

19

Maximum Security Downlight - Flat Lens Downlight - Drop Lens

Horizontal Horizontal

2 Triple 42 2 Triple 42

12" x 14" 12" x 14"

VSS-12029 VSS-12030

20

Downlight - Flat Lens Downlight - Drop Lens

Horizontal Horizontal

2 Triple 57 2 Triple 57

12" x 14" 12" x 14"

VSS-12031 VSS-12032

21

Surface Rectangle Downlight

.5816 x 1.0313

VRR-10019 VRR-10020

Vandal Resistant

Recessed Square .8638 x 1.0313

10" 10"

14

Downlight

Maximum Security Horizontal

2 T8 32

Horizontal Horizontal

1 Triple 57 2 T8 32

Cornice Rectangle Cornice Mount

1' x 4'

VST-12033

22

Maximum Security 8" x 1' 8" x 4'

VCT-08034 VCT-08035

23

Table of Contents - Page 2 of 2

Since 1895 Lamp Position

Description

Maximum Wattage

COMPACT FLUORESCENT - continued NightLight

Nominal Size*

Product Number

Pages

Vandal Resistant

.6426 x 1.0313 Louver

Horizontal

1 Quad 13

7" x 9"

24

VNT-07036

LED NightLight / StepLight / MarkerLight LED LED

7" x 9" 3" x 7"

VNT-07037 VNT-03038

25

Lens - Square - MarkerLight Lens - Square - Eyelid NightLight

LED LED

5" x 5" 5" x 5"

VNS-05039 VNS-05040

26

Lens - Round - MarkerLight Lens - Round - Eyelid NightLight

LED LED

5" 5"

VNR-05041 VNR-05042

27

QL (INDUCTION) Recessed Round .6194 x 1.0313

Vandal Resistant

Downlight

Vertical Vertical

85 QL 85 QL

10" 12"

Horizontal Vertical

100 150

7" 7"

VRR-07045 VRR-07046

29

Horizontal Vertical

150 175

8" 8"

VRR-08047 VRR-08048

30

Horizontal Vertical

150 200

10" 10"

VRR-10049 VRR-10050

31

Horizontal

250

12"

VRR-12051

32

METAL HALIDE Recessed Round

28

Vandal Resistant

Downlight 1.3506 x 1.0313

.5717 x 1.0313

VRR-10043 VRR-12044

Recessed Round - Concrete Pour Downlight

Vandal Resistant Horizontal

150

Recessed Square

10"

33

VRR-10052

Maximum Security

Downlight - Drop Lens

Horizontal

100

Surface Square

1' x 1'

VRS-12053

34

Maximum Security

.6205 x 1.0313 Downlight - Drop Lens

Horizontal

100

INCANDESCENT Recessed Round

= Type IC

EEE

= Exceptional Energy EfďŹ ciency

Product Numbering Guide

!

Series Vandal

"

Mount Cornice Recessed Surface Nightlight

#

VSS-12054

Vandal Resistant

Downlight

.9635 x 1.0313

12" x 14"

Vertical Horizontal

250 150

8" 7"

VRR-08055 VRR-07056

35

Horizontal Horizontal

150 200

8" 10"

VRR-08057 VRR-10058

36

= Premier Product

= Air Tight Optional

Example: V R R - 0 7 0 0 1 - 4 3 Shape Round Square T: Rectangle

$

! "# $ & % Numeric Options: & Sequence % Add after

Nominal Trim / Housing Size 03 = 3" 08 = 8" 05 = 5" 10 = 10" 07 = 7" 12 = 12"

in Catalog

catalog number

* Size: Indicates nominal aperture of trim for recessed fixtures and housing size (width x height) for surface and wall bracket fixtures.

1.1435 x 1.0313

Vandal Resistant

Louvered NightLight Lens - Rectangle - StepLight

Energy Efficient Vandal Resistant & Maximum Security Lighting

CATALOG INTRODUCTION & PRODUCT FEATURES

Since 1895

Founded in 1895, The Kirlin Company is the nation’s most experienced independent lighting fixture manufacturer. For over thirty years, Kirlin has offered tough, innovative designs for vandal resistant and security lighting applications. Kirlin has provided lighting to hundreds of facilities, including the notable San Quentin Prison, Cook County Jail, Mayo Clinic Psychiatric facility and the Hong Kong Zoo. Kirlin offers a full range of luminaires from architectural vandal resistant products to high-risk environment maximum security fixtures.

Our fixtures incorporate advanced manufacturing methods and design features (including rustproof extruded aluminum housings; WhisperPack™ ballasts; polycarbonate, tempered glass and high strength acrylic lenses) to ensure our luminaires withstand abuse.

Kirlin also offers the most extensive line of options in the industry, allowing you to design each fixture to the demanding needs of specific applications.

The result is this Vandal Resistant and Maximum Security collection of 58 Kirlin luminaires which deliver maximum safety, performance, quality and energy efficiency - all backed by Kirlin’s exclusive three year limited warranty.

Clear Creek High School - League City, TX Lighting Design & Architecture - PBK, Inc. Lighting by Kirlin: VRR-10004

ARCHITECTURAL VANDAL RESISTANT FEATURES Kirlin’s architectural vandal resistant designs are ideal for vandal prone applications such as schools, hospitals, airports, transit stations, sports facilities, building exteriors and public areas. Designs include recessed, surface, cornice and wall mounts, featuring downlights and nightlights with specific designs for shallow plenum and concrete pour installations.

Rustproof and corrosion resistant aluminum housing for cool operation and long luminaire life.

Lightweight for easier installation.

Precision optics maximize light output, visual comfort and efficiency.

Quiet and cool WhisperPack™ ballast standard on all metal halide luminaires ensuring cool and quiet operation with long life.

Reinforced trim mounting brackets.

Vandal resistant seamless heavy gauge self-flanged aluminum trims.

Vandal resistant captive hex screws, requires special tool for removal (provided).

Dual lenses for added strength.

MAXIMUM SECURITY FEATURES For especially demanding environments such as jails and psychiatric facilities, Kirlin offers our unique maximum security line of luminaires. Designs include extra strong extruded aluminum recessed, surface and cornice mounts including specific designs for shallow plenum and concrete pour applications.

Adjustable reinforced housing mounting brackets.

6063-T6 tempered extruded aluminum housings (rustproof, cool operating and more than twice as strong as 14 gauge steel).

Tempered aluminum full length lens clamps with captive nuts.

Vandal resistant captive hex screws, requires special tool for removal.

2

www.kirlinlighting.com

Precision optics maximize light output and visual comfort.

Shiv Trap is standard on all surface and cornice mounted fixtures.

3/16” high strength prismatic acrylic lens with 1/4” clear polycarbonate lens below. Polycarbonate lenses up to 3/8” thick, are available, capable of stopping a .45 caliber bullet.

Since 1895

KIRLIN ENERGY EFFICIENCY & PERFORMANCE THE BENEFITS OF HORIZONTAL LAMP BURN POSITION

Kirlin’s strength in designing solutions for special applications such as vandal resistant and security fixtures provides you with an even greater range of opportunity and service. Several categories are worth highlighting:

A horizontal burn position usually has significant advantages when compared to a vertical lamp position. The key to achieving these advantages is through Kirlin’s superior fixture design and materials.

• TYPE IC: Type IC fixtures are designed to be installed in direct contact with insulation thereby minimizing the amount of uninsulated plenum space and significantly reducing energy costs.

It has been proven* that if only 4.2% of a ceiling is uninsulated, heat loss increases a disproportionate 34%!

With a reflector and cone properly designed for a horizontal lamp, the following benefits are realized:

Kirlin’s numerous Type IC listed fixtures are identified in the Table of Contents and featured on the product pages.

• TYPE IC AIR TIGHT HOUSING: To maximize energy efficiency, some states (i.e. Washington State) require less than 2 cfm of air flow through the fixture. By minimizing air flow through the fixture, “conditioned” air will not pass from the conditioned space into the plenum. Energy costs are thereby reduced.

Kirlin offers a variety of recessed round and square luminaires with an “-AT” option and delineated as “Air Tight” in the product description.

• EXCEPTIONAL ENERGY EFFICIENCY: Kirlin produces the largest selection of energy efficient luminaires available. Each fixture in this catalog with an exceptionally high efficiency rating (above 50%) is marked with this logo for quick EEE identification.

• PREMIER PRODUCTS: Premier Products are superb examples of Kirlin’s Hallmarks of Quality and exceptional customer value. They provide the highest level of design sophistication, innovation and quality manufacturing found in all Kirlin luminaires.

• PERFORMANCE: Wider distribution and higher fixture efficiencies are achieved.

• VALUE: The number of fixtures required to light the space is reduced.

• HOUSING DEPTH: Housings are shallower.

THE BENEFITS OF ALUMINUM HOUSINGS An important advantage of a horizontal burn position is a shallower fixture design. However, with smaller housings, heat becomes a greater design challenge. Kirlin’s all-aluminum “box” construction provides maximum surface area and superior heat dissipation qualities compared to steel, offering the following benefits: • LONGER LIFE: By keeping the interior of the fixture cool, component life is increased. For example, Kirlin compact fluorescent fixtures operate 5°C cooler than a similar steel housing, which can extend ballast life by 50%!

Energy Efficient Vandal Resistant & Maximum Security Lighting

SPECIALIZED ENERGY EFFICIENT DESIGNS and APPLICATIONS

• MAXIMUM PERFORMANCE: Fluorescent lamps and ballasts are designed to operate optimally at certain temperatures. As temperatures start to rise above this, lumen output of the fixture is reduced. Kirlin’s all-aluminum design helps keep operating temperatures at the appropriate levels so that lamp and ballast performance is maximized.

• INSTALLATION EASE: With a horizontal lamp position and Kirlin’s housing design, fixture height may be reduced by up to 70% over vertical lamp designs. This greatly facilitates installation into shallow plenums. Aluminum’s lighter weight reduces installation time and cost due to much easier handling and ceiling load requirements.

Many outdoor and indoor applications will experience high ambient temperatures where lamp/ballast life and lumen output may start to decrease appreciably. The result often is premature lamp and ballast failure along with a fixture that does not perform to the manufacturer’s published standards.

Kirlin superior designs incorporating all aluminum construction, horizontal lamp position, optimized optics, and unique heat management properties, permit shallow fixture housings and superior photometric performance especially in high ambient temperature applications.

Comerica Park - Detroit, MI Lighting Design: Illuminating Concepts Architecture: Hellmuth, Obata + Kassabaum, Inc. Lighting by Kirlin: VRS-12025 * Tests conducted by the U.S. Naval Civil Engineering Lab for the Johns-Manville Corp.

www.kirlinlighting.com

3

Energy Efficient Vandal Resistant & Maximum Security Lighting

VRR-07001 - Type IC VRR-08002 - Type IC

7”

1 Triple

32 WATT MAXIMUM

8”

1 Triple

42 WATT MAXIMUM

Since 1895

Small Aperture for Visual Comfort Specifications • Continuous ring secures lens to trim.

• Tamperproof tool included.

Aluminum Housing • Acrylic enameled. Rustproof: Exceeds 1000 hour ASTM 5% salt spray test.

• Lightweight: Minimizes ceiling load.

• Cool operation: Extends component life.

• Entire luminaire serviced through aperture.

• Built-in plaster frame.

Outlet Box • Prewired 14 GA (NEC) galvanized steel, UL listed.

1/2” and 3/4” knockouts.

Installation • 27” galvanized hanger bars with adjustable mounting brackets (2) supplied.

• Recesses indoor or outdoor in covered locations.

UL, C-UL (Canada) Listings • Wet, damp or dry locations, covered ceilings.

• Through-branch conductors (6 #12 AWG 90°C).

• Type IC (non-dimming). Approved for direct contact with insulation.

Three Year Limited Warranty • Complete standard fixture and ballast.

Lamp • Designed for one 4-pin triple tube amalgam or quad compact fluorescent lamp: VRR-07001: 32/26W triple.

VRR-08002: 42/32/26W triple or 26W quad.

Ballast: Multi-Wattage/Voltage • Installed electronic high power factor, thermally protected. For lower wattages: Option -43.

• 120-277 multi-volt; 50-60 Hz. THD <10%.

• ClickQuick connectors for easy service.

• Cold weather -22ºF (-30ºC).

• End of lamp life protection circuit. RFI filter.

• Internally fused. Also see Option -FS. Reflector • Specular Alzak® aluminum.

Trim / Lens Assembly • Vandal resistant smooth white seamless tapered aluminum self-flanged flare trim or see -OG. • Flush center pin tamperproof hex screws and captive nuts secure trim to housing.

• Prismatic 3/16” high strength acrylic above 1/4” clear polycarbonate.

Black OptiGroove Option -OG

Type IC For Air Tight version see page 10

Performance at a Glance*

For detailed ITL reports see www.kirlinlighting.com, data disk or submittal sheets.

VRR-07001 (1 Triple 26W)

VRR-07001 (1 Triple 32W)

VRR-07001: Type IC

90˚

Ceiling Cut-out 8” Dia.

75˚ 160

60˚

320

45˚

480 0˚

Dist.

6 8 10 12 14 16

FC 13.1 7.34 4.7 3.3 2.4 1.8

Dia. 6.7 9.0 11.2 13.5 15.7 18.0

0° SC 1.0 15˚ 30˚ 90° SC 1.1 180° SC 1.2 EFFICIENCY: 35.2% ITL TEST #59140 LER=21.2 AEC=$11.33

Option -OG Also Shown

90˚

Cone of Light*

75˚ 140

60˚

280

45˚

420 0˚

90˚ 75˚ 250

60˚

500

Ceiling Cut-out 9” Dia.

45˚

750 0˚

15˚

30˚

EFFICIENCY: 44.8%

Option -OG Also Shown

ITL TEST #59142

FC 19.9 11.2 7.2 5.0 3.7 2.8

FC 10.9 6.1 3.9 2.7 2.0 1.5

Dia. 6.6 8.8 11.0 13.2 15.4 17.6

0° SC 1.1 90° SC 1.1 180° SC 1.0 LER=22.1 AEC=$10.87

VRR-08002 (1 Triple 32W) 90˚

Cone of Light* Dist.

6 8 10 12 14 16

30˚

ITL TEST #59139

VRR-08002 (1 Triple 42W)

VRR-08002: Type IC

15˚

EFFICIENCY: 37.9%

Cone of Light* Dist.

6 8 10 12 14 16

Dia. 6.8 9.0 11.3 13.5 15.8 18.0

0° SC 1.1 90° SC 1.1 180° SC 1.1 LER=28.9 AEC=$8.31

75˚ 190

60˚

380

45˚

570 0˚

15˚

30˚

EFFICIENCY: 44.5% ITL TEST #59141

Cone of Light* Dist.

6 8 10 12 14 16

FC 15.3 8.6 5.5 3.8 2.8 2.1

Dia. 6.6 8.8 11.0 13.2 15.4 17.6

0° SC 1.1 90° SC 1.1 180° SC 1.0 LER=26.9 AEC=$8.91

Options Ballast, Wattage and Voltage -39 Installed electronic dimming ballast. Not Type IC listed. Indoor use. 10°C (50°F) minimum start. Specify wattage, voltage and brand.

-43 Lower wattage: for 4-pin 18W triple or 1813W quad. Specify wattage.

-97 Specify other voltage. Consult factory.

-98 347 volt, 50/60 Hz. input. Consult factory.

1

Emergency Ballast - Specify Voltage

Internal (factory installed) ballast, test switch and indicator light. Suitable for damp locations from

1

4

0° to 50°C (32° to 122°F) or with Cold Weather version (see -CE) -20° to 55°C (-4° to 131°F).

-73 Internal EM ballast. Specify voltage.

-CE Internal cold weather (-20° to 55°C) EM ballast. Specify voltage.

-HE1 Internal higher lumen (up to 1250) EM ballast.

13-42W only. Specify voltage.

Lenses and Trims -32 -45 -46 -94 -CF

White oversize trim ring. Specify O.D. Gasket between ceiling and trim flange.

Gasket between trim and lens.

Custom color/finish. Specify. Consult factory.

High temperature color filter. Specify color.

Visit www.kirlinlighting.com for most current performance / specifications.

www.kirlinlighting.com

-OG Black OptiGroove flare trim. (CP x .95) -UV UV filter. Consult factory.

Other -79 -99 -FS -LE

Extension collar for ceilings up to 2” thick.

Special modification. Consult factory.

Additional in-line fuse.

With 4-pin electronic lamp. 3500°K standard.

82 CRI and 12,000 hour life. Specify wattage, style and color temperature.

* Photometric Definitions and Keys are shown on page 37.

Alzak® is a registered trademark of ALCOA.

Since 1895

10”

1 Triple

32 WATT MAXIMUM

10”

1 Triple

42 WATT MAXIMUM

Type IC - VRR-10003 Type IC - VRR-10004

Specifications

• Continuous ring secures lens to trim.

• Tamperproof tool included.

Aluminum Housing • Acrylic enameled. Rustproof: Exceeds 1000 hour ASTM 5% salt spray test.

• Lightweight: Minimizes ceiling load.

• Cool operation: Extends component life.

• Entire luminaire serviced through aperture.

• Built-in plaster frame.

Outlet Box • Prewired 14 GA (NEC) galvanized steel, UL listed.

1/2” and 3/4” knockouts.

Installation • 27” galvanized hanger bars with adjustable mounting brackets (2) supplied.

• Recesses indoor or outdoor in covered locations.

UL, C-UL (Canada) Listings • Wet, damp or dry locations, covered ceilings.

• Type IC (non-dimming). Approved for direct contact with insulation.

• Through-branch conductors (6 #12 AWG 90°C).

Three Year Limited Warranty • Complete standard fixture and ballast.

Lamp • Designed for one 4-pin triple tube amalgam or quad compact fluorescent lamp: VRR-10003: 32/26W triple or 26W quad.

VRR-10004: 42/32/26W triple or 26W quad.

Ballast: Multi-Wattage/Voltage • Installed electronic high power factor, thermally protected. For lower wattages: Option -43.

• 120-277 multi-volt; 50-60 Hz. THD <10%.

• ClickQuick connectors for easy service.

• Cold weather -22ºF (-30ºC).

• End of lamp life protection circuit. RFI filter.

• Internally fused. Also see Option -FS. Reflector • Specular Alzak® aluminum.

Trim / Lens Assembly • Vandal resistant smooth white seamless tapered aluminum self-flanged flare trim or see -OG. • Flush center pin tamperproof hex screws and captive nuts secure trim to housing.

• Prismatic 3/16” high strength acrylic above 1/4” clear polycarbonate.

Black OptiGroove Option -OG

Exceptional Energy Efficiency EEE

Premier Product

Type IC

For Air Tight version see page 11

Performance at a Glance*

For detailed ITL reports see www.kirlinlighting.com, data disk or submittal sheets.

VRR-10003: Type IC

VRR-10003 (1 Triple 32W) 90˚

Ceiling Cut-out 10½” Dia.

75˚ 190

60˚

380

45˚

570 0˚

Option -OG Also Shown EEE

15˚

30˚

EFFICIENCY: 53.7% ITL TEST #59143

VRR-10004: Type IC

90˚ 350

60˚

700

Ceiling Cut-out 10½” Dia.

Emergency Ballast - Specify Voltage1 Internal (factory installed) ballast, test switch and indicator light. Suitable for damp locations from

1

0° to 50°C (32° to 122°F) or with Cold Weather version (see -CE) -20° to 55°C (-4° to 131°F).

-73 Internal EM ballast. Specify voltage.

-CE Internal cold weather (-20° to 55°C) EM ballast. Specify voltage.

-HE1 Internal higher lumen (up to 1250) EM ballast.

13-42W only. Specify voltage.

Dia. 7.3 9.7 12.2 14.6 17.0 19.5

0° SC 1.1 90° SC 1.2 180° SC 1.3 LER=33.2 AEC=$7.22

30˚

ITL TEST #59122

Cone of Light* Dist.

6 8 10 12 14 16

FC 25.4 14.3 9.1 6.4 4.7 3.6

Dia. 7.5 10.0 12.5 14.9 17.4 19.9

0° SC 1.0 90° SC 1.3 180° SC 1.3 LER=31.0 AEC=$7.74

Other -79 -99 -FS -LE

Extension collar for ceilings up to 2” thick.

Special modification. Consult factory.

Additional in-line fuse.

With 4-pin electronic lamp. 3500°K standard.

82 CRI and 12,000 hour life. Specify wattage, style and color temperature.

Lenses and Trims -32 -45 -46 -94 -CF -OG -UV

White oversize trim ring. Specify O.D. Gasket between ceiling and trim flange.

Gasket between trim and lens.

Custom color/finish. Specify. Consult factory.

High temperature color filter. Specify color.

Black OptiGroove flare trim. (CP x .95) UV filter. Consult factory.

Visit www.kirlinlighting.com for most current performance / specifications.

Alzak® is a registered trademark of ALCOA.

15˚

EFFICIENCY: 51.7%

EEE

-39 Installed electronic dimming ballast. Not Type IC listed. Indoor use. 10°C (50°F) minimum start. Specify wattage, voltage and brand.

-43 Lower wattage. For 4-pin 18W triple or 18-13W quad. Specify wattage.

-97 Specify other voltage. Consult factory.

-98 347 volt, 50/60 Hz. input. Consult factory.

45˚

1050 0˚

Option -OG Also Shown

Ballast, Wattage and Voltage

FC 15.6 8.8 5.6 3.9 2.9 2.2

VRR-10004 (1 Triple 42W) 75˚

Options

Cone of Light* Dist.

6 8 10 12 14 16

Energy Efficient Vandal Resistant & Maximum Security Lighting

Large Aperture for High Efficiency

* Photometric Definitions and Keys are shown on page 37. www.kirlinlighting.com

5

Energy Efficient Vandal Resistant & Maximum Security Lighting

VRR-10005 VRR-12006

10”

1 Triple

57 WATT MAXIMUM

12”

1 Triple

70 WATT MAXIMUM

Since 1895

Large Aperture with High Lumen Output Specifications

Black OptiGroove Option -OG

Exceptional Energy Efficiency EEE

Lamp • Designed for one 4-pin triple/four tube amalgam compact fluorescent lamp: VRR-10005: 57W triple/four tube.

VRR-10006: 70W triple/four tube.

Ballast: Multi/Voltage • Installed electronic high power factor, thermally protected. For lower wattages: Option -43.

• 120-277 multi-volt; 50-60 Hz. THD <10%.

• ClickQuick connectors for easy service.

• Cold weather -22ºF (-30ºC).

• End of lamp life protection circuit. RFI filter.

• Internally fused. Also see Option -FS. Reflector • Specular Alzak® aluminum.

Trim / Lens Assembly • Vandal resistant smooth white seamless tapered aluminum self-flanged flare trim or see -OG. • Flush center pin tamperproof hex screws and captive nuts secure trim to housing.

• Prismatic 3/16” high strength acrylic above 1/4” clear polycarbonate.

• Continuous ring secures lens to trim.

• Tamperproof tool included.

Aluminum Housing • Acrylic enameled. Rustproof: Exceeds 1000 hour ASTM 5% salt spray test.

• Lightweight: Minimizes ceiling load.

• Cool operation: Extends component life.

• Entire luminaire serviced through aperture.

• Built-in plaster frame.

Outlet Box • Prewired 14 GA (NEC) galvanized steel, UL listed.

1/2” and 3/4” knockouts.

Installation • 27” galvanized hanger bars with adjustable mounting brackets (2) supplied.

• Recesses indoor or outdoor in covered locations.

UL, C-UL (Canada) Listings • Wet, damp or dry locations, covered ceilings.

• Through-branch conductors (6 #12 AWG 90°C).

Three Year Limited Warranty • Complete standard fixture and ballast.

For Air Tight version see page 11

Performance at a Glance* VRR-10005

For detailed ITL reports see www.kirlinlighting.com, data disk or submittal sheets.

VRR-10005 (1 Triple 57W)

Ceiling Cut-out 10½” Dia.

90˚

Cone of Light*

75˚ 400

60˚

800

45˚

1200 0˚

Option -OG Also Shown

EEE

Dist.

6 8 10 12 14 16

15˚

VRR-12006 (1 Triple 70W) 90˚

Cone of Light*

75˚ 600

Dist.

6 8 10 12 14 16

60˚

1200

45˚

1800 0˚

15˚

Options Ballast, Wattage and Voltage -39 Installed electronic dimming ballast. Indoor use. 10°C (50°F) minimum start. Specify wattage, voltage and brand.

-43 Lower wattage: VRR-10005: for 4-pin 42/32/26W triple or 26W quad (multiwattage/voltage); VRR-12006: for 4-pin 57W triple/four tube or 42/32/26W triple or 26W quad (multi-wattage/voltage). Specify wattage.

-97 Specify other voltage. Consult factory.

-98 347 volt, 50/60 Hz. input. Consult factory.

1

6

Ceiling Cut-out 12¼” Dia.

ITL TEST #59144

Emergency Ballast - Specify Voltage1

Lenses and Trims

Internal (factory installed) or remote (field mounted) ballast, test switch and indicator light.

Suitable for damp locations from 0° to 50°C (32° to 122°F) or with Cold Weather version (see -CE or -CR) -20° to 55°C (-4° to 131°F).

-73 Internal 1-lamp EM ballast for VRR-12006.

-75 Remote 1-lamp EM ballast for VRR-10005.

-CE Internal cold weather (-20° to 55°C) 1-lamp EM ballast for VRR-12006. Specify voltage.

-CR Remote cold weather (-20° to 55°C) 1-lamp EM ballast for VRR-10005. Specify voltage.

-HE1 Internal higher lumen (up to 1250) 1-lamp EM ballast for VRR-12006. 13-42W only.

-HR1 Remote higher lumen (up to 1250) 1-lamp EM ballast for VRR-10005. 13-42W only.

-32 -45 -46 -94 -CF -OG -UV

Visit www.kirlinlighting.com for most current performance / specifications.

www.kirlinlighting.com

EEE

FC 47.1 26.5 17.0 11.8 8.6 6.6

Dia. 5.7 7.6 9.5 11.4 13.3 15.2

0° SC 1.0 90° SC 0.9 180° SC 1.0 LER=32.0 AEC=$7.51

30˚

EFFICIENCY: 51.7%

Option -OG Also Shown

Dia. 7.1 9.4 11.8 14.1 16.5 18.8

0° SC 1.2 90° SC 1.2 180° SC 1.1 LER=34.4 AEC=$6.97

30˚

EFFICIENCY: 54.2% ITL TEST #59137

VRR-12006

FC 31.7 17.8 11.4 7.9 5.8 4.5

White oversize trim ring. Specify O.D. Gasket between ceiling and trim flange.

Gasket between trim and lens.

Custom color/finish. Specify. Consult factory.

High temperature color filter. Specify color.

Black OptiGroove flare trim. (CP x .95) UV filter. Consult factory.

Other -79 -99 -FS -LE

Extension collar for ceilings up to 2” thick.

Special modification. Consult factory.

Additional in-line fuse.

With 4-pin electronic lamp. 3500°K standard.

82 CRI and 12,000 hour life. Specify wattage, style and color temperature.

* Photometric Definitions and Keys are shown on page 37.

Alzak® is a registered trademark of ALCOA.

Since 1895

12”

1 PL-H

VRR-12007

60 WATT MAXIMUM

Specifications • Continuous ring secures lens to trim.

• Tamperproof tool included.

Aluminum Housing • Acrylic enameled. Rustproof: Exceeds 1000 hour ASTM 5% salt spray test.

• Lightweight: Minimizes ceiling load.

• Cool operation: Extends component life.

• Entire luminaire serviced through aperture.

• Built-in plaster frame.

Outlet Box • Prewired 14 GA (NEC) galvanized steel, UL listed.

1/2” and 3/4” knockouts.

Installation • 27” galvanized hanger bars with adjustable mounting brackets (2) supplied.

• Recesses indoor or outdoor in covered locations.

UL, C-UL (Canada) Listings • Wet, damp or dry locations, covered ceilings.

• Through-branch conductors (6 #12 AWG 90°C).

Three Year Limited Warranty • Complete standard fixture and ballast.

Lamp • Designed for one 4-pin Philips PL-H triple tube amalgam compact fluorescent lamp: 60 watt PL-H. • Long 20,000 hour life, 4,000 initial lumens.

Ballast: Multi-Voltage • Installed electronic high power factor, thermally protected.

• 120-277 multi-volt; 50-60 Hz. THD <10%.

• Cold weather -22ºF (-30ºC).

• End of lamp life protection circuit. RFI filter.

• Internally fused. Also see Option -FS. Reflector • Specular Alzak® aluminum.

Trim / Lens Assembly • Vandal resistant smooth white seamless tapered aluminum self-flanged flare trim or see -OG. • Flush center pin tamperproof hex screws and captive nuts secure trim to housing.

• Prismatic tempered C#73 glass lens above 1/4” clear polycarbonate.

Performance at a Glance*

Black OptiGroove Option -OG

For detailed ITL reports see www.kirlinlighting.com, data disk or submittal sheets.

VRR-12007

Energy Efficient Vandal Resistant & Maximum Security Lighting

60 Watt PL-H With 20,000 Hour Long Lamp Life

VRR-12007 (1 PL-H 60W) 90˚ 75˚ 550

60˚

1100

45˚

1650 0˚

15˚

30˚

EFFICIENCY: 48.4% ITL TEST #56383

Cone of Light* Dist.

6 8 10 12 14 16

FC 42.3 23.8 15.2 10.6 7.8 6.0

Dia. 5.1 6.8 8.5 10.2 11.9 13.6

0° SC 1.0 90° SC 0.8 180° SC 0.8 LER=24.5 AEC=$9.81

Ceiling Cut-out 12¼” Dia.

Option -OG Also Shown

Options Ballast, Wattage and Voltage -39 Installed electronic dimming ballast. Indoor use. 10°C (50°F) minimum start. Specify wattage, voltage. CONSULT FACTORY FOR AVAILABILITY. -97 Specify other voltage. Consult factory.

-98 347 volt, 50/60 Hz. input. Consult factory.

Emergency Ballast - Specify Voltage1 Remote (field mounted) ballast, test switch and indicator light. Suitable for damp locations from 0° to 50°C (32° to 122°F) or with Cold Weather version (see -CR) -20° to 55°C (-4° to 131°F).

1

-75 Remote 1-lamp EM ballast. Specify voltage.

Use this option for outdoor emergency applications, where pack is remote mounted indoors in a heated space. Maintain a maximum distance of 7 feet between emergency pack and lamp.

Lenses and Trims -32 -45 -46 -94 -CF -OG -UV

-79 -99 -FS -LE

Extension collar for ceilings up to 2” thick.

Special modification. Consult factory.

Additional in-line fuse.

With 4-pin electronic lamp. 3000°K standard or specify 4100°K. 82 CRI and 20,000 hour life.

Specify wattage and color temperature.

White oversize trim ring. Specify O.D. Gasket between ceiling and trim flange.

Gasket between trim and lens.

Custom color/finish. Specify. Consult factory.

High temperature color filter. Specify color.

Black OptiGroove flare trim. (CP x .95) UV filter. Consult factory.

Visit www.kirlinlighting.com for most current performance / specifications.

Alzak® is a registered trademark of ALCOA.

Other

* Photometric Definitions and Keys are shown on page 37. www.kirlinlighting.com

7

Energy Efficient Vandal Resistant & Maximum Security Lighting

VRR-10008 VRR-12009

10”

2 Triple

32 WATT MAXIMUM

12”

2 Triple

32 WATT MAXIMUM

Since 1895

2 Lamp Designs: Uniform Illumination Specifications Lamp • Designed for two 4-pin triple tube amalgam or quad compact fluorescent lamps: 32/26W triple or 26W quad.

Ballast: Multi-Wattage/Voltage • Installed electronic high power factor, thermally protected. For lower wattages: Option -43.

• 120-277 multi-volt; 50-60 Hz. THD <10%.

• ClickQuick connectors for easy service.

• Single circuit wiring or see Option -84.

• Cold weather -22ºF (-30ºC).

• End of lamp life protection circuit. RFI filter.

• Internally fused. Also see Options -FS, -FD. Reflector • Specular Alzak® aluminum.

Trim / Lens Assembly • Vandal resistant smooth white seamless tapered aluminum self-flanged flare trim or see -OG. • Flush center pin tamperproof hex screws and captive nuts secure trim to housing.

• Prismatic 3/16” high strength acrylic above 1/4” clear polycarbonate.

Black OptiGroove Option -OG

For Air Tight version see page 13

Performance at a Glance*

• Continuous ring secures lens to trim.

• Tamperproof tool included.

Aluminum Housing • Acrylic enameled. Rustproof: Exceeds 1000 hour ASTM 5% salt spray test.

• Lightweight: Minimizes ceiling load.

• Cool operation: Extends component life.

• Entire luminaire serviced through aperture.

• Built-in plaster frame.

Outlet Box • Prewired 14 GA (NEC) galvanized steel, UL listed.

1/2” and 3/4” knockouts.

Installation • 27” galvanized hanger bars with adjustable mounting brackets (2) supplied.

• Recesses indoor or outdoor in covered locations.

UL, C-UL (Canada) Listings • Wet, damp or dry locations, covered ceilings.

• Through-branch conductors (6 #12 AWG 90°C).

Three Year Limited Warranty • Complete standard fixture and ballast.

For detailed ITL reports see www.kirlinlighting.com, data disk or submittal sheets.

VRR-10008

VRR-10008 (2 Triple 32W) 90˚ 75˚ 350

60˚

700 1050 0˚

15˚

30˚

EFFICIENCY: 44.4% ITL TEST #59120

Ceiling Cut-out 10½” Dia.

Option -OG Also Shown

45˚

VRR-12009

Cone of Light* Dist.

6 8 10 12 14 16

FC 29.1 16.4 10.5 7.3 5.4 4.1

Dia. 7.2 9.6 11.9 14.3 16.7 19.1

0° SC 1.1 45° SC 1.2 90° SC 1.3 LER=28.1 AEC=$8.55

VRR-12009 (2 Triple 32W) 90˚ 75˚ 500

60˚

1000

45˚

1500 0˚

15˚

30˚

EFFICIENCY: 49.2%

Ceiling Cut-out 12¼” Dia.

Option -OG Also Shown

ITL TEST #42385

Cone of Light* Dist.

6 8 10 12 14 16

FC 40.3 22.7 14.5 10.1 7.4 5.7

Dia. 5.8 7.7 9.6 11.5 13.5 15.4

0° SC 1.0 45° SC 1.0 90° SC 1.0 LER=30.1 AEC=$7.97

Options† Ballast, Wattage and Voltage -39 Installed electronic dimming ballast. Indoor use. 10°C (50°F) minimum start. Specify wattage, voltage and brand.

-43 Lower wattage: for 4-pin 2x18W triple or 2x18-13W quad. Specify wattage.

-84 Wired for two circuits. Also see -FD. -97 Specify other voltage. Consult factory.

-98 347 volt, 50/60 Hz. input. Consult factory.

1

Emergency Ballast - Specify Voltage

Internal (factory installed) ballast, test switch and indicator light. Suitable for damp locations from 1

8

Other

Lenses and Trims -32 -45 -46 -94 -CF

White oversize trim ring. Specify O.D. Gasket between ceiling and trim flange.

Gasket between trim and lens.

Custom color/finish. Specify. Consult factory.

High temperature color filter. Specify color.

Visit www.kirlinlighting.com for most current performance / specifications.

www.kirlinlighting.com

-OG Black OptiGroove flare trim. (CP x .95) -UV UV filter. Consult factory.

0° to 50°C (32° to 122°F) or with Cold Weather version (see -CE) -20° to 55°C (-4° to 131°F).

-73 Internal 1-lamp EM ballast. Specify voltage.

-74 Internal 2-lamp EM ballast. Consult factory.

-CE Internal cold weather (-20° to 55°C) 1-lamp EM ballast. Specify voltage.

-HE1 Internal higher lumen (up to 1250) 1-lamp EM ballast. 13-32W only. Specify voltage.

-79 Extension collar for ceilings up to 2” thick.

-99 Special modification. Consult factory.

-FD Two additional in-line fuses. One per ballast.

Use with Option -84.

-FS Additional in-line fuse.

-LE With 4-pin electronic lamps. 3500°K standard.

82 CRI and 12,000 hour life. Specify wattage, style and color temperature.

* Photometric Definitions and Keys are shown on page 37.

Alzak® is a registered trademark of ALCOA.

Since 1895

12”

2 Triple

42 WATT MAXIMUM

12”

3 Triple

42 WATT MAXIMUM

VRR-12010 VRR-12011

Specifications

• Prismatic 3/16” high strength acrylic above 1/4” clear polycarbonate.

• Continuous ring secures lens to trim.

• Tamperproof tool included.

Aluminum Housing • Acrylic enameled. Rustproof: Exceeds 1000 hour ASTM 5% salt spray test.

• Lightweight: Minimizes ceiling load.

• Cool operation: Extends component life.

• Entire luminaire serviced through aperture.

• Built-in plaster frame.

Outlet Box • Prewired 14 GA (NEC) galvanized steel, UL listed.

1/2” and 3/4” knockouts.

Installation • 27” galvanized hanger bars with adjustable mounting brackets (2) supplied.

• Recesses indoor or outdoor in covered locations.

UL, C-UL (Canada) Listings • Wet, damp or dry locations, covered ceilings.

• Through-branch conductors (6 #12 AWG 90°C).

Three Year Limited Warranty • Complete standard fixture and ballast.

Lamp • Designed for 4-pin triple tube amalgam or quad compact fluorescent lamps: VRR-12010: two 42/32/26W triple or 26W quad.

VRR-12011: three 42/32/26W triple or 26W quad.

Ballast: Multi-Wattage/Voltage • Installed electronic high power factor, thermally protected. For lower wattages: Option -43.

• 120-277 multi-volt; 50-60 Hz. THD <10%.

• ClickQuick connectors for easy service.

• Single circuit wiring or see Option -84.

• Cold weather -22ºF (-30ºC).

• End of lamp life protection circuit. RFI filter.

• Internally fused. Also see Options -FS, -FD. Reflector • Specular Alzak® aluminum.

Trim / Lens Assembly • Vandal resistant smooth white seamless tapered aluminum self-flanged flare trim or see -OG. • Flush center pin tamperproof hex screws and captive nuts secure trim to housing.

Performance at a Glance*

Black OptiGroove Option -OG

For Air Tight version see page 13

For detailed ITL reports see www.kirlinlighting.com, data disk or submittal sheets.

Ceiling Cut-out 12¼” Dia.

VRR-12010

VRR-12010 (2 Triple 42W) 90˚ 75˚ 600

60˚

1200 1800 0˚

45˚ 15˚

30˚

EFFICIENCY: 40.7% ITL TEST #59121

Option -OG Also Shown

VRR-12011

75˚ 700

60˚

1400 2100 0˚

-39 Installed electronic dimming ballast. Indoor use. 10°C (50°F) minimum start. Specify wattage, voltage and brand.

-43 Lower wattage. VRR-12010: for 4-pin 2x18W triple or 2x18-13W quad; VRR-12011: for 3x18W triple or 3x18-13W quad. Specify wattage.

-84 Wired for two circuits. Also see Option -FD. -97 Specify other voltage. Consult factory.

-98 347 volt, 50/60 Hz. input. Consult factory.

Emergency Ballast - Specify Voltage1 Internal (factory installed) ballast, test switch and 1

indicator light. Suitable for damp locations from 0° to 50°C (32° to 122°F) or with Cold Weather version (see -CE) -20° to 55°C (-4° to 131°F).

-73 Internal 1-lamp EM ballast. Specify voltage.

-74 Internal 2-lamp EM ballast. Consult factory.

-CE Internal cold weather (-20° to 55°C) 1-lamp EM ballast. Specify voltage.

-HE1 Internal higher lumen (up to 1250) 1-lamp EM ballast. 13-42W only. Specify voltage.

Lenses and Trims -32 -45 -46 -94 -CF

White oversize trim ring. Specify O.D. Gasket between ceiling and trim flange.

Gasket between trim and lens.

Custom color/finish. Specify. Consult factory.

High temperature color filter. Specify color.

Visit www.kirlinlighting.com for most current performance / specifications.

Alzak® is a registered trademark of ALCOA.

45˚ 15˚

30˚

EFFICIENCY: 41.3% ITL TEST #59128

Ceiling Cut-out 12¼” Dia.

Option -OG Also Shown

Ballast, Wattage and Voltage

FC 48.3 27.2 17.4 12.1 8.9 6.8

Dia. 5.6 7.4 9.3 11.2 13.0 14.9

0° SC 0.9 45° SC 0.9 90° SC 0.9 LER=25.0 AEC=$9.58

VRR-12011 (3 Triple 42W) 90˚

Options

Cone of Light* Dist.

6 8 10 12 14 16

Energy Efficient Vandal Resistant & Maximum Security Lighting

2x42 and 3x42 for High Ceilings

Cone of Light* Dist.

6 8 10 12 14 16

FC 55.3 31.1 19.9 13.8 10.2 7.8

Dia. 6.5 8.7 10.8 13.0 15.2 17.3

0° SC 1.0 90° SC 1.1 180° SC 1.1 LER=30.7 AEC=$7.81

-OG Black OptiGroove flare trim. (CP x .95) -UV UV filter. Consult factory.

Other -79 Extension collar for ceilings up to 2” thick.

-99 Special modification. Consult factory.

-FD Two additional in-line fuses. One per ballast.

Use with Option -84.

-FS Additional in-line fuse.

-LE With 4-pin electronic lamps. 3000°K standard or specify 4100°K. 82 CRI and 20,000 hour life.

Specify wattage and color temperature.

-TA Top access for servicing VRR-12011 from above.

* Photometric Definitions and Keys are shown on page 37. www.kirlinlighting.com

9

Energy Efficient Vandal Resistant & Maximum Security Lighting

VRR-07012 - Type IC VRR-08013 - Type IC

7”

1 Triple

32 WATT MAXIMUM

8”

1 Triple

42 WATT MAXIMUM

Since 1895

Sealed & Gasketed Small Aperture Specifications

Black OptiGroove Option -OG

Type IC

Air Tight

Lamp • Designed for one 4-pin triple tube amalgam or quad compact fluorescent lamp: VRR-07012: 32/26W triple.

VRR-08013: 42/32/26W triple or 26W quad.

Ballast: Multi-Wattage/Voltage • Installed electronic high power factor, thermally protected. For lower wattages: Option -43.

• 120-277 multi-volt; 50-60 Hz. THD <10%.

• ClickQuick connectors for easy service.

• Cold weather -22ºF (-30ºC).

• End of lamp life protection circuit. RFI filter.

• Internally fused. Also see Option -FS. Reflector • Specular Alzak® aluminum.

Trim / Lens Assembly: Double Gasketed • Vandal resistant smooth white seamless tapered aluminum self-flanged and gasketed flare trim or see Option -OG. • Flush center pin tamperproof hex screws (2) with O-rings seal fasteners to trim. Captive nuts secure gasketed trim to housing, providing reliable seal at ceiling.

• 3/16” prismatic high strength acrylic lens above 1/4” clear polycarbonate. Continuous ring and

Performance at a Glance*

gasketing secure and seal lens to trim.

• Tamperproof tool included.

Aluminum Housing • Acrylic enameled. Rustproof: Exceeds 1000 hour ASTM 5% salt spray test.

• Built-in plaster frame surrounded by closed cell silicone gasketing seals housing to ceiling.

• Lightweight: Minimizes ceiling load.

• Cool operation: Extends component life.

• Entire luminaire serviced through aperture.

Outlet Box • Prewired 14 GA (NEC) galvanized steel, UL listed.

1/2” and 3/4” knockouts.

Installation • 27” galvanized hanger bars with adjustable mounting brackets (2) supplied.

• Recesses indoor or outdoor in covered locations.

UL, C-UL (Canada) Listings • Wet, damp or dry locations, covered ceilings.

• Through-branch conductors (6 #12 AWG 90°C).

• Type IC. Approved for direct contact with insulation.

Three Year Limited Warranty • Complete standard fixture and ballast.

For detailed ITL reports see www.kirlinlighting.com, data disk or submittal sheets.

VRR-07012 (1 Triple 26W)

VRR-07012 (1 Triple 32W)

VRR-07012: Type IC

90˚

Ceiling Cut-out 8” Dia.

75˚ 60

80 0˚

Dist.

6 8 10 12 14 16

60˚

20

45˚ 15˚

FC 13.1 7.4 4.7 3.3 2.4 1.8

Dia. 6.7 9.0 11.2 13.5 15.7 18.0

30˚

0° SC 1.0 90° SC 1.1 180° SC 1.2 EFFICIENCY: 35.2% ITL TEST #59140 LER=21.2 AEC=$11.33

Option -OG Also Shown

90˚

Cone of Light*

75˚ 140 280 420 0˚

90˚

750 0˚

45˚ 15˚

30˚

EFFICIENCY: 44.8%

Option -OG Also Shown

Dist.

6 8 10 12 14 16

60˚

500

Ceiling Cut-out 9” Dia.

ITL TEST #59142

15˚

FC 19.9 11.2 7.2 5.0 3.7 2.8

30˚

ITL TEST #59139

FC 10.9 6.1 3.9 2.7 2.0 1.5

Dia. 6.6 8.8 11.0 13.2 15.4 17.6

0° SC 1.1 90° SC 1.1 180° SC 1.0 LER=22.1 AEC=$10.87

VRR-08013 (1 Triple 32W) 90˚

Cone of Light*

75˚ 250

45˚

EFFICIENCY: 37.9%

VRR-08013 (1 Triple 42W)

VRR-08013: Type IC

60˚

Cone of Light* Dist.

6 8 10 12 14 16

Dia. 6.8 9.0 11.3 13.5 15.8 18.0

0° SC 1.1 90° SC 1.1 180° SC 1.1 LER=28.9 AEC=$8.31

75˚ 190

60˚

380 570 0˚

45˚ 15˚

30˚

EFFICIENCY: 44.5% ITL TEST #59141

Cone of Light* Dist.

6 8 10 12 14 16

FC 15.3 8.6 5.5 3.8 2.8 2.1

Dia. 6.6 8.8 11.0 13.2 15.4 17.6

0° SC 1.1 90° SC 1.1 180° SC 1.0 LER=26.9 AEC=$8.91

Options Ballast, Wattage and Voltage -39 Installed electronic dimming ballast. Not Type IC listed. Indoor use. 10°C (50°F) minimum start. Specify wattage, voltage and brand.

-43 Lower wattage: for 4-pin 18W triple or 1813W quad. Specify wattage.

-97 Specify other voltage. Consult factory.

-98 347 volt, 50/60 Hz. input. Consult factory.

1

10

Emergency Ballast - Specify Voltage1

Lenses and Trims

Internal (factory installed) ballast, test switch and indicator light. Suitable for damp locations from 0° to 50°C (32° to 122°F) or with Cold Weather version (see -CE) -20° to 55°C (-4° to 131°F).

-73 Internal EM ballast. Specify voltage.

-CE Internal cold weather (-20° to 55°C) EM ballast. Specify voltage.

-HE1 Internal higher lumen (up to 1250) EM ballast.

13-32W only. Specify voltage.

-94 -CF -OG -UV

Visit www.kirlinlighting.com for most current performance / specifications.

www.kirlinlighting.com

Custom color/finish. Specify. Consult factory.

High temperature color filter. Specify color.

Black OptiGroove flare trim. (CP x .95) UV filter. Consult factory.

Other -99 Special modification. Consult factory.

-FS Additional in-line fuse.

-LE With 4-pin electronic lamp. 3500°K standard.

82 CRI and 12,000 hour life. Specify wattage, style and color temperature.

* Photometric Definitions and Keys are shown on page 37.

Alzak® is a registered trademark of ALCOA.

Since 1895

10”

1 Triple

42 WATT MAXIMUM

10”

1 Triple

57 WATT MAXIMUM

Type IC - VRR-10014 VRR-10015

Specifications Lamp • Designed for one 4-pin triple/four tube amalgam or quad compact fluorescent lamp: VRR-10014: 42/32/26W triple or 26W quad.

VRR-10015: 57W triple/four tube.

Ballast: Multi/Voltage • Installed electronic high power factor, thermally protected. For lower wattages: Option -43.

• VRR-10014: Multi-wattage.

• 120-277 multi-volt; 50-60 Hz. THD <10%.

• ClickQuick connectors for easy service.

• Cold weather -22ºF (-30ºC).

• End of lamp life protection circuit. RFI filter.

• Internally fused. Also see Option -FS. Reflector • Specular Alzak® aluminum.

Trim / Lens Assembly: Double Gasketed • Vandal resistant smooth white seamless tapered aluminum self-flanged and gasketed flare trim or see Option -OG. • Flush center pin tamperproof hex screws (2) with O-rings seal fasteners to trim. Captive nuts secure gasketed trim to housing, providing reliable seal at ceiling.

Performance at a Glance*

• 3/16” prismatic high strength acrylic lens above 1/4” clear polycarbonate. Continuous ring and gasketing secure and seal lens to trim.

• Tamperproof tool included.

Aluminum Housing • Acrylic enameled. Rustproof: Exceeds 1000 hour ASTM 5% salt spray test.

• Built-in plaster frame surrounded by closed cell silicone gasketing seals housing to ceiling.

• Lightweight: Minimizes ceiling load.

• Cool operation: Extends component life.

• Entire luminaire serviced through aperture.

Outlet Box • Prewired 14 GA (NEC) galvanized steel, UL listed.

1/2” and 3/4” knockouts.

Installation • 27” galvanized hanger bars with adjustable mounting brackets (2) supplied.

• Recesses indoor or outdoor in covered locations.

UL, C-UL (Canada) Listings • Wet, damp or dry locations, covered ceilings.

• VRR-10014 Type IC. Approved for direct contact with insulation.

• Through-branch conductors (6 #12 AWG 90°C).

Three Year Limited Warranty • Complete standard fixture and ballast.

Black OptiGroove Option -OG

Exceptional Energy Efficiency EEE

Type IC

Air Tight

For detailed ITL reports see www.kirlinlighting.com, data disk or submittal sheets.

VRR-10014: Type IC

VRR-10014 (1 Triple 42W) 90˚

Ceiling Cut-out 10½” Dia.

75˚ 350

60˚

700

45˚

1050 0˚

Option -OG Also Shown EEE

15˚

30˚

EFFICIENCY: 51.7% ITL TEST #59122

Cone of Light* Dist.

6 8 10 12 14 16

FC 25.4 14.3 9.1 6.4 4.7 3.6

Dia. 7.5 10.0 12.5 14.9 17.4 19.9

Energy Efficient Vandal Resistant & Maximum Security Lighting

Sealed & Gasketed Higher Wattage

0° SC 1.0 90° SC 1.3 180° SC 1.3 LER=31.0 AEC=$7.74

VRR-10015 (1 Triple 57W)

VRR-10015

90˚ 75˚ 400

60˚

800

Ceiling Cut-out 10½” Dia.

45˚

1200 0˚

Option -OG Also Shown EEE

15˚

30˚

EFFICIENCY: 54.2% ITL TEST #59137

Cone of Light* Dist.

6 8 10 12 14 16

FC 31.7 17.8 11.4 7.9 5.8 4.5

Dia. 7.1 9.4 11.8 14.1 16.5 18.8

0° SC 1.2 90° SC 1.2 180° SC 1.1 LER=34.4 AEC=$6.97

Options Ballast, Wattage and Voltage -39 Installed electronic dimming ballast. Indoor use. 10°C (50°F) minimum start. Specify wattage, voltage and brand.

-43 Lower wattage. VRR-10014: for 4-pin 18W triple or 18-13W quad. VRR-10015: for 42/32/26W triple or 26W quad (multiwattage/voltage). Specify wattage.

-97 Specify other voltage. Consult factory.

-98 347 volt, 50/60 Hz. input. Consult factory.

Emergency Ballast - Specify Voltage1 Internal (factory installed) or remote (field mounted) 1

ballast, test switch and indicator light. Suitable for damp locations from 0° to 50°C (32° to 122°F) or with Cold Weather version (see -CE or -CR) -20° to 55°C (-4° to 131°F).

-73 Internal 1-lamp EM ballast for VRR-10014.

-75 Remote 1-lamp EM ballast for VRR-10015.

-CE Internal cold weather (-20° to 55°C) 1-lamp EM ballast for VRR-10014. Specify voltage.

-CR Remote cold weather (-20° to 55°C) 1-lamp EM ballast for VRR-10015. Specify voltage.

-HE1 Internal higher lumen (up to 1250) 1-lamp EM ballast for VRR-10014. 13-42W only.

-HR1 Remote higher lumen (up to 1250) 1-lamp EM ballast for VRR-10015. 13-42W only.

Visit www.kirlinlighting.com for most current performance / specifications.

Alzak® is a registered trademark of ALCOA.

Lenses and Trims -94 -CF -OG -UV

Custom color/finish. Specify. Consult factory.

High temperature color filter. Specify color.

Black OptiGroove flare trim. (CP x .95) UV filter. Consult factory.

Other -99 Special modification. Consult factory.

-FS Additional in-line fuse.

-LE With 4-pin electronic lamp. 3500°K standard.

82 CRI and 12,000 hour life. Specify wattage, style and color temperature.

* Photometric Definitions and Keys are shown on page 37. www.kirlinlighting.com

11

Energy Efficient Vandal Resistant & Maximum Security Lighting

VRR-10016

10”

2 Triple

Since 1895

32 WATT MAXIMUM

Sealed & Gasketed Two Lamp Design reliable seal at ceiling.

• 3/16” prismatic high strength acrylic lens above 1/4” clear polycarbonate. Continuous ring and gasketing secure and seal lens to trim.

• Tamperproof tool included.

Aluminum Housing • Acrylic enameled. Rustproof: Exceeds 1000 hour ASTM 5% salt spray test.

• Built-in plaster frame surrounded by closed cell silicone gasketing seals housing to ceiling.

• Lightweight: Minimizes ceiling load.

• Cool operation: Extends component life.

• Entire luminaire serviced through aperture.

Outlet Box • Prewired 14 GA (NEC) galvanized steel, UL listed.

1/2” and 3/4” knockouts.

Installation • 27” galvanized hanger bars with adjustable mounting brackets (2) supplied.

• Recesses indoor or outdoor in covered locations.

UL, C-UL (Canada) Listings • Wet, damp or dry locations, covered ceilings.

• Through-branch conductors (6 #12 AWG 90°C).

Three Year Limited Warranty • Complete standard fixture and ballast.

Specifications

Black OptiGroove Option -OG

Air Tight

Lamp • Designed for two 4-pin triple tube amalgam or quad compact fluorescent lamps: 32/26W triple or 26W quad.

Ballast: Multi-Wattage/Voltage • Installed electronic high power factor, thermally protected. For lower wattages: Option -43.

• 120-277 multi-volt; 50-60 Hz. THD <10%.

• ClickQuick connectors for easy service.

• Single circuit wiring or see Option -84.

• Cold weather -22ºF (-30ºC).

• End of lamp life protection circuit. RFI filter.

• Internally fused. Also see Options -FS, -FD. Reflector • Specular Alzak® aluminum.

Trim / Lens Assembly: Double Gasketed • Vandal resistant smooth white seamless tapered aluminum self-flanged and gasketed flare trim or see Option -OG. • Flush center pin tamperproof hex screws (2) with O-rings seal fasteners to trim. Captive nuts secure gasketed trim to housing, providing

Performance at a Glance*

For detailed ITL reports see www.kirlinlighting.com, data disk or submittal sheets.

VRR-10016

VRR-10016 (2 Triple 32W) 90˚ 75˚ 350

60˚

700 1050 0˚

45˚ 15˚

30˚

EFFICIENCY: 44.4% ITL TEST #59120

Option -OG Also Shown

Cone of Light* Dist.

6 8 10 12 14 16

FC 29.1 16.4 10.5 7.3 5.4 4.1

Dia. 7.2 9.6 11.9 14.3 16.7 19.1

0° SC 1.1 45° SC 1.2 90° SC 1.3 LER=28.1 AEC=$8.55

Ceiling Cut-out 10½” Dia.

Options Ballast, Wattage and Voltage -39 Installed electronic dimming ballast. Indoor use. 10°C (50°F) minimum start. Specify wattage, voltage and brand.

-43 Lower wattage: for 4-pin 18W triple or 18-13W quad. Specify wattage.

-84 Wired for two circuits. Also see -FD. -97 Specify other voltage. Consult factory.

-98 347 volt, 50/60 Hz. input. Consult factory.

Emergency Ballast - Specify Voltage1 Internal (factory installed) ballast, test switch and 1

12

indicator light. Suitable for damp locations from 0° to 50°C (32° to 122°F) or with Cold Weather version (see -CE) -20° to 55°C (-4° to 131°F).

-73 Internal EM ballast. Specify voltage.

-74 Internal 2-lamp EM ballast. Consult factory.

-CE Internal cold weather (-20° to 55°C) EM ballast. Specify voltage.

-HE1 Internal higher lumen (up to 1250) EM ballast.

13-32W only. Specify voltage.

Lenses and Trims

Other -99 Special modification. Consult factory.

-FD Two additional in-line fuses. One per ballast.

Use with Option -84.

-FS Additional in-line fuse.

-LE With 4-pin electronic lamps. 3500°K standard.

82 CRI and 12,000 hour life. Specify wattage, style and color temperature.

-94 Custom color/finish. Specify. Consult factory.

-CF High temperature color filter. Specify color.

Visit www.kirlinlighting.com for most current performance / specifications.

www.kirlinlighting.com

-OG Black OptiGroove flare trim. (CP x .95) -UV UV filter. Consult factory.

* Photometric Definitions and Keys are shown on page 37.

Alzak® is a registered trademark of ALCOA.

Since 1895

12”

2 Triple

32 WATT MAXIMUM

12”

2 Triple

42 WATT MAXIMUM

VRR-12017 VRR-12018

Specifications Lamp • Designed for two 4-pin triple tube amalgam or quad compact fluorescent lamps: VRR-12017: 32/26W triple or 26W quad.

VRR-12018: 42/32/26W triple or 26W quad.

Ballast: Multi-Wattage/Voltage • Installed electronic high power factor, thermally protected. For lower wattages: Option -43.

• 120-277 multi-volt; 50-60 Hz. THD <10%.

• ClickQuick connectors for easy service.

• Single circuit wiring or see Option -84.

• Cold weather -22ºF (-30ºC).

• End of lamp life protection circuit. RFI filter.

• Internally fused. Also see Options -FS, -FD. Reflector • Specular Alzak® aluminum.

Trim / Lens Assembly: Double Gasketed • Vandal resistant smooth white seamless tapered aluminum self-flanged and gasketed flare trim or see Option -OG. • Flush center pin tamperproof hex screws (2) with O-rings seal fasteners to trim. Captive nuts secure gasketed trim to housing, providing

reliable seal at ceiling.

• 3/16” prismatic high strength acrylic lens above 1/4” clear polycarbonate. Continuous ring and gasketing secure and seal lens to trim.

• Tamperproof tool included.

Aluminum Housing • Acrylic enameled. Rustproof: Exceeds 1000 hour ASTM 5% salt spray test.

• Built-in plaster frame surrounded by closed cell silicone gasketing seals housing to ceiling.

• Lightweight: Minimizes ceiling load.

• Cool operation: Extends component life.

• Entire luminaire serviced through aperture.

Outlet Box • Prewired 14 GA (NEC) galvanized steel, UL listed.

1/2” and 3/4” knockouts.

Installation • 27” galvanized hanger bars with adjustable mounting brackets (2) supplied.

• Recesses indoor or outdoor in covered locations.

UL, C-UL (Canada) Listings • Wet, damp or dry locations, covered ceilings.

• Through-branch conductors (6 #12 AWG 90°C).

Three Year Limited Warranty • Complete standard fixture and ballast.

Performance at a Glance*

Black OptiGroove Option -OG

Air Tight

For detailed ITL reports see www.kirlinlighting.com, data disk or submittal sheets.

VRR-12017

VRR-12017 (2 Triple 32W) 90˚

Ceiling Cut-out 12¼” Dia.

75˚ 500

60˚

1000 1500 0˚

45˚ 15˚

30˚

EFFICIENCY: 49.2%

Option -OG Also Shown

ITL TEST #42385

VRR-12018

Cone of Light* Dist.

6 8 10 12 14 16

FC 40.3 22.7 14.5 10.1 7.4 5.7

Dia. 5.8 7.7 9.6 11.5 13.5 15.4

Energy Efficient Vandal Resistant & Maximum Security Lighting

Sealed & Gasketed with High Lumen Output

0° SC 1.0 45° SC 1.0 90° SC 1.0 LER=30.1 AEC=$7.97

VRR-12018 (1 Triple 42W) 90˚ 75˚ 600

60˚

1200

Ceiling Cut-out 12¼” Dia.

1800 0˚

45˚ 15˚

30˚

EFFICIENCY: 40.7% ITL TEST #59121

Option -OG Also Shown

Cone of Light* Dist.

6 8 10 12 14 16

FC 48.3 27.2 17.4 12.1 8.9 6.8

Dia. 5.6 7.4 9.3 11.2 13.0 14.9

0° SC 0.9 45° SC 0.9 90° SC 0.9 LER=25.0 AEC=$9.58

Options Ballast, Wattage and Voltage -39 Installed electronic dimming ballast. Indoor use. 10°C (50°F) minimum start. Specify wattage, voltage and brand.

-43 Lower wattage. For 4-pin 18W triple or 18-13W quad. Specify wattage.

-84 Wired for two circuits. Also see -FD. -97 Specify other voltage. Consult factory.

-98 347 volt, 50/60 Hz. input. Consult factory.

Emergency Ballast - Specify Voltage1 Internal (factory installed) ballast, test switch and 1

indicator light. Suitable for damp locations from 0° to 50°C (32° to 122°F) or with Cold Weather version (see -CE) -20° to 55°C (-4° to 131°F).

-73 Internal 1-lamp EM ballast.

-74 Internal 2-lamp EM ballast. Consult factory.

-CE Internal cold weather (-20° to 55°C) 1-lamp EM ballast. Specify voltage.

-HE1 Internal higher lumen (up to 1250) 1-lamp EM ballast. 13-42W only. Specify voltage.

Lenses and Trims

Other -99 Special modification. Consult factory.

-FD Two additional in-line fuses. One per ballast.

Use with Option -84.

-FS Additional in-line fuse.

-LE With 4-pin electronic lamps. 3500°K standard.

82 CRI and 12,000 hour life. Specify wattage, style and color temperature.

-94 Custom color/finish. Specify. Consult factory.

-CF High temperature color filter. Specify color.

Visit www.kirlinlighting.com for most current performance / specifications.

Alzak® is a registered trademark of ALCOA.

-OG Black OptiGroove flare trim. (CP x .95) -UV UV filter. Consult factory.

* Photometric Definitions and Keys are shown on page 37. www.kirlinlighting.com

13

Energy Efficient Vandal Resistant & Maximum Security Lighting

VRR-10019 VRR-10020

10”

1 Triple

57 WATT MAXIMUM

10”

2 Triple

32 WATT MAXIMUM

Since 1895

Concrete Pour with Shallow Depth Specifications

Black OptiGroove Option -OG

Exceptional Energy Efficiency EEE

• Prismatic 3/16” high strength acrylic above 1/4” clear polycarbonate.

• Continuous ring secures lens to trim.

• For gasketing, see Options -45 and -46.

• Tamperproof tool included.

Concrete Pour Housing • 16 GA. galvannealed steel with black enamel finish.

• Fully gasketed.

• Entire luminaire serviced through aperture.

• 2” collar promotes concrete flow.

Outlet Box • Prewired 14 GA (NEC) galvanized steel, UL listed.

1/2” and 3/4” knockouts.

Installation • Recesses indoor or outdoor in poured concrete ceilings.

UL, C-UL (Canada) Listings • For use in poured concrete.

• Through-branch conductors (6 #12 AWG 90°C).

Three Year Limited Warranty • Complete standard fixture and ballast.

Lamp • Designed for 4-pin triple/four tube amalgam or quad compact fluorescent lamp(s): VRR-10019: one 57W triple/four tube.

VRR-10020: two 32/26W triple or 26W quad.

Ballast: Multi/Voltage • Installed electronic high power factor, thermally protected. For lower wattages: Option -43.

• VRR-10020: Multi-wattage.

• 120-277 multi-volt; 50-60 Hz. THD <10%.

• ClickQuick connectors for easy service.

• Single circuit wiring or see Option -84.

• Cold weather -22ºF (-30ºC).

• End of lamp life protection circuit. RFI filter.

• Internally fused. Also see Options -FS, -FD. Reflector • Specular Alzak® aluminum.

Trim / Lens Assembly • Vandal resistant smooth white seamless tapered aluminum self-flanged flare trim or see -OG. • Flush center pin tamperproof hex screws and captive nuts secure trim to housing.

Performance at a Glance*

For detailed ITL reports see www.kirlinlighting.com, data disk or submittal sheets.

VRR-10019

VRR-10019 (1 Triple 57W) 90˚

Cone of Light*

75˚ 400

60˚

800 1200 0˚

Dist.

6 8 10 12 14 16

45˚ 15˚

EEE

ITL TEST #59137

VRR-10020

Dia. 7.1 9.4 11.8 14.1 16.5 18.8

0° SC 1.2 90° SC 1.2 180° SC 1.1 LER=34.4 AEC=$6.97

30˚

EFFICIENCY: 54.2%

Option -OG Also Shown

FC 31.7 17.8 11.4 7.9 5.8 4.5

VRR-10020 (2 Triple 32W) 90˚

Cone of Light*

75˚ 350

60˚

700 1050 0˚

Dist.

6 8 10 12 14 16

45˚ 15˚

FC 29.1 16.4 10.5 7.3 5.4 4.1

Dia. 7.2 9.6 11.9 14.3 16.7 19.1

0° SC 1.1 45° SC 1.2 90° SC 1.3 LER=28.1 AEC=$8.55

30˚

EFFICIENCY: 44.4% ITL TEST #59120

Option -OG Also Shown

Options† Ballast, Wattage and Voltage -39 Installed electronic dimming ballast. Indoor use. 10°C (50°F) minimum start. Specify wattage, voltage and brand.

-43 Lower wattage. VRR-10019: for 4-pin 42/32/36W triple or 26W quad (multiwattage/voltage); VRR-10020: for 4-pin 2x18W triple or 2x18-13W quad. Specify wattage.

-84 Wired for two circuits. Also see -FD. (VRR-10020 only) -97 Specify other voltage. Consult factory.

-98 347 volt, 50/60 Hz. input. Consult factory.

Emergency Ballast - Specify Voltage1 Internal (factory installed) or remote (field mounted) 1

14

ballast, test switch and indicator light. Suitable for damp locations from 0° to 50°C (32° to 122°F) or with Cold Weather version (see -CE or -CR) -20° to 55°C (-4° to 131°F).

-73 Internal 1-lamp EM ballast for VRR-10020.

-74 Internal 2-lamp EM ballast for VRR-10020.

Consult factory.

-75 Remote 1-lamp EM ballast for VRR-10019.

-CE Internal cold weather (-20° to 55°C) 1-lamp EM ballast for VRR-10020. Specify voltage.

-CR Remote cold weather (-20° to 55°C) 1-lamp EM ballast for VRR-10019. Specify voltage.

-HE1 Internal higher lumen (up to 1250) 1-lamp EM ballast for VRR-10020. 13-42W only.

-HR1 Remote higher lumen (up to 1250) 1-lamp EM ballast for VRR-10019. 13-42W only.

Visit www.kirlinlighting.com for most current performance / specifications.

www.kirlinlighting.com

Lenses and Trims -32 -45 -46 -94 -CF -OG -UV

White oversize trim ring. Specify O.D. Gasket between ceiling and trim flange.

Gasket between trim and lens.

Custom color/finish. Specify. Consult factory.

High temperature color filter. Specify color.

Black OptiGroove flare trim. (CP x .95) UV filter. Consult factory.

Other -99 Special modification. Consult factory.

-FD Two additional in-line fuses. One per ballast.

Use with Option -84. (VRR-10020 only) -FS Additional in-line fuse.

-LE With 4-pin electronic lamp(s). 3500°K standard.

82 CRI and 12,000 hour life. Specify wattage, style and color temperature.

* Photometric Definitions and Keys are shown on page 37.

Alzak® is a registered trademark of ALCOA.

Since 1895

12”

1 Triple

VSR-12021

70 WATT MAXIMUM

EEE

Specifications Lamp • Designed for one 4-pin triple/four tube amalgam compact fluorescent lamp: 70W triple/four tube.

Ballast: Multi/Voltage • Installed electronic high power factor, thermally protected. For lower wattages: Option -43.

• 120-277 multi-volt; 50-60 Hz. THD <10%.

• ClickQuick connectors for easy service.

• Cold weather -22ºF (-30ºC).

• End of lamp life protection circuit. RFI filter.

• Internally fused. Also see Option -FS. Reflector • Specular Alzak® aluminum.

Trim / Lens Assembly • Vandal resistant smooth white seamless tapered aluminum self-flanged flare trim or see -OG. • Flush center pin tamperproof hex screws and captive nuts secure trim to housing.

• Prismatic 3/16” high strength acrylic above 1/4” clear polycarbonate.

• Continuous ring secures lens to trim.

• Tamperproof tool included.

Aluminum Housing • Seamless white acrylic enameled. Rustproof: Exceeds 1000 hour ASTM 5% salt spray test.

• No visible cylinder hardware.

• Lightweight: Minimizes ceiling load.

• Cool operation: Extends component life.

Installation • Center point mounting for snug fit to ceiling.

Mounting hardware included.

• 2” collar for surface J-box mount. (Option -80) • Pendant or wall bracket mount available. (See Options -PM, -WB) • Indoor or outdoor for covered ceiling use. (See Option -89) UL, C-UL (Canada) Listings • Wet, damp or dry locations, covered ceilings.

(See Option -89) Three Year Limited Warranty • Complete standard fixture and ballast.

Performance at a Glance*

Black OptiGroove Option -OG

Pendant Mount Option -PM

Bracket Mount Option -WB

For detailed ITL reports see www.kirlinlighting.com, data disk or submittal sheets.

Exceptional Energy Efficiency EEE

VSR-12021

Energy Efficient Vandal Resistant & Maximum Security Lighting

Shallow & Efficient Surface Cylinder

VSR-12021 (1 Triple 70W) 90˚

Representative Views:

75˚

(Above) With optional pendant mount (Option -PM)

600

(Below) With optional wall bracket (Option -WB)

60˚

1200

45˚

1800 0˚

Option -40 Also Shown

15˚

30˚

EFFICIENCY: 51.7%

EEE

Options† Ballast, Wattage and Voltage -39 Installed electronic dimming ballast. Indoor use. 10°C (50°F) minimum start. Specify wattage, voltage and brand.

-43 Lower wattage: for 4-pin 57W or 42/32/26W triple or 26W quad (multi-wattage/voltage).

Specify wattage.

-97 Specify other voltage. Consult factory.

-98 347 volt, 50/60 Hz. input. Consult factory.

Emergency Ballast - Specify Voltage1 Remote (field mounted) ballast, test switch and indicator light. Suitable for damp locations from 0° to 50°C (32° to 122°F) or with Cold Weather version (see -CR) -20° to 55°C (-4° to 131°F).

-75 Remote 1-lamp EM ballast. Specify voltage.

-CR Remote cold weather (-20° to 55°C) 1-lamp EM ballast. Specify voltage.

1

-HR1 Remote higher lumen (up to 1250) 1-lamp EM ballast. 13-42W only. Specify voltage.

Lenses and Trims -46 -94 -CF -OG -UV

Gasket between trim and lens.

Custom color/finish. Specify. Consult factory.

High temperature color filter. Specify color.

Black OptiGroove flare trim. (CP x .95) UV filter. Consult factory.

Luminaire (Housing) Finishes -35 -36 -37 -38 -94

Natural aluminum acrylic enamel.

Gold acrylic enamel.

Dark Bronze acrylic enamel.

Black acrylic enamel.

Custom color/finish. Specify. Consult factory.

Mounting

FC 47.1 26.5 17.0 11.8 8.6 6.6

Dia. 5.7 7.6 9.5 11.4 13.3 15.2

0° SC 1.0 90° SC 0.9 180° SC 1.0 LER=32.0 AEC=$7.51

-87 Custom pendant / wall bracket length. Specify length. Use with -PM, or -WB. -88 Swivel canopy for sloped ceilings up to 40°.

Use with Option -PM. -89 Sealed top WeatherCap. Must add to Options -PM and -WB for wet label listing.

-PM Pendant mount. 8” stem or see Option -87.

Must add Option -89 for wet label listing.

-WB Wall bracket mount. Must add Option -89 for wet label listing.

Other -99 Special modification. Consult factory.

-FS Additional in-line fuse.

-LE With 4-pin electronic lamp. 3500°K standard.

82 CRI and 12,000 hour life. Specify wattage, style and color temperature.

-54 Safety cable from fixture through pendant stem and 12” beyond. Use with -PM. -80 2” collar for mounting beneath surface outlet box. 1/2” T.S. KO’s.

Visit www.kirlinlighting.com for most current performance / specifications.

Alzak® is a registered trademark of ALCOA.

ITL TEST #59144

Cone of Light* Dist.

6 8 10 12 14 16

* Photometric Definitions and Keys are shown on page 37. www.kirlinlighting.com

15

Energy Efficient Vandal Resistant & Maximum Security Lighting

VSR-12022 VSR-12023

12”

2 Triple

32 WATT MAXIMUM

12”

2 Triple

42 WATT MAXIMUM

Since 1895

Surface Cylinders for Higher Ceilings Specifications Lamp • Designed for two 4-pin triple tube amalgam or quad compact fluorescent lamps: VSR-12022: 32/36W triple or 26W quad.

VSR-12023: 42/32/26W triple or 26W quad.

Ballast: Multi-Wattage/Voltage • Installed electronic high power factor, thermally protected. For lower wattages: Option -43.

• 120-277 multi-volt; 50-60 Hz. THD <10%.

• ClickQuick connectors for easy service.

• Single circuit wiring or see Option -84.

• Cold weather -22ºF (-30ºC).

• End of lamp life protection circuit. RFI filter.

• Internally fused. Also see Options -FS, -FD. Reflector • Specular Alzak® aluminum.

Trim / Lens Assembly • Vandal resistant smooth white seamless tapered aluminum self-flanged flare trim or see -OG. • Flush center pin tamperproof hex screws and captive nuts secure trim to housing.

Black OptiGroove Option -OG

Pendant Mount Option -PM

• Prismatic 3/16” high strength acrylic above 1/4” clear polycarbonate.

• Continuous ring secures lens to trim.

• Tamperproof tool included.

Aluminum Housing • Seamless white acrylic enameled. Rustproof: Exceeds 1000 hour ASTM 5% salt spray test.

• No visible cylinder hardware.

• Lightweight: Minimizes ceiling load.

• Cool operation: Extends component life.

Installation • Center point mounting for snug fit to ceiling.

Mounting hardware included.

• 2” collar for surface J-box mount. (Option -80) • Pendant or wall bracket mount available. (See Options -PM, -WB) • Indoor or outdoor for covered ceiling use. (See Option -89) UL, C-UL (Canada) Listings • Wet, damp or dry locations, covered ceilings.

(See Option -89) Three Year Limited Warranty • Complete standard fixture and ballast.

Bracket Mount Option -WB

Performance at a Glance*

For detailed ITL reports see www.kirlinlighting.com, data disk or submittal sheets.

VSR-12022 (2 Triple 32W)

VSR-12022

90˚ 75˚ 500

60˚

1000 1500 0˚

Option -OG Also Shown

15˚

ITL TEST #42385

(Above) With optional pendant mount (Option -PM)

90˚ 75˚ 600

60˚

1200 1800 0˚

Option -OG Also Shown -HE1 Internal higher lumen (up to 1250) 1-lamp EM ballast. 13-42W only. Specify voltage.

Ballast, Wattage and Voltage

Lenses and Trims

-39 Installed electronic dimming ballast. Indoor use. 10°C (50°F) minimum start. Specify wattage, voltage and brand.

-43 Lower wattage. For 4-pin 2x18W triple or 2x18-13W quad. Specify wattage.

-84 Wired for two circuits. Also see -FD. -97 Specify other voltage. Consult factory.

-98 347 volt, 50/60 Hz. input. Consult factory.

1

Emergency Ballast - Specify Voltage

Internal (factory installed) ballast, test switch and indicator light. Suitable for damp locations from 0° to 50°C (32° to 122°F) or with Cold Weather version (see -CE) -20° to 55°C (-4° to 131°F).

-73 Internal 1-lamp EM ballast. Specify voltage.

-74 Internal 2-lamp EM ballast. Consult factory.

-CE Internal cold weather (-20° to 55°C) 1-lamp EM ballast. Specify voltage.

16

-46 -94 -CF -OG -UV

Gasket between trim and lens.

Custom color/finish. Specify. Consult factory.

High temperature color filter. Specify color.

Black OptiGroove flare trim. (CP x .95) UV filter. Consult factory.

Luminaire (Housing) Finishes -35 -36 -37 -38 -94

Natural aluminum acrylic enamel.

Gold acrylic enamel.

Dark Bronze acrylic enamel.

Black acrylic enamel.

Custom color/finish. Specify. Consult factory.

Mounting -54 Safety cable from fixture through pendant stem and 12” beyond. Use with -PM. -80 2” collar for mounting beneath surface outlet box. 1/2” T.S. KO’s.

Visit www.kirlinlighting.com for most current performance / specifications.

www.kirlinlighting.com

45˚ 15˚

30˚

EFFICIENCY: 40.7% ITL TEST #59121

Options

FC 40.3 22.7 14.5 10.1 7.4 5.7

Dia. 5.8 7.7 9.6 11.5 13.5 15.4

0° SC 1.0 45° SC 1.0 90° SC 1.0 LER=30.1 AEC=$7.97

VSR-12023 (2 Triple 42W)

(Below) With optional wall bracket (Option -WB)

1

30˚

EFFICIENCY: 49.2%

Representative Views:

VSR-12023

45˚

Cone of Light* Dist.

6 8 10 12 14 16

Cone of Light* Dist.

6 8 10 12 14 16

FC 48.3 27.2 17.4 12.1 8.9 6.8

Dia. 5.6 7.4 9.3 11.2 13.0 14.9

0° SC 0.9 45° SC 0.9 90° SC 0.9 LER=25.0 AEC=$9.58

-87 Custom pendant / wall bracket length. Specify length. Use with Options -PM, or -WB. -88 Swivel canopy for sloped ceilings up to 40°.

Use with Option -PM. -89 Sealed top WeatherCap. Must add to Options -PM and -WB for wet label listing.

-PM Pendant mount. 8” stem or see Option -87.

Must add Option -89 for wet label listing.

-WB Wall bracket mount. Must add Option -89 for wet label listing.

Other -99 Special modification. Consult factory.

-FD Two additional in-line fuses. One per ballast.

Use with Option -84.

-FS Additional in-line fuse.

-LE With 4-pin electronic lamps. 3500°K standard.

82 CRI and 12,000 hour life. Specify wattage, style and color temperature.

* Photometric Definitions and Keys are shown on page 37.

Alzak® is a registered trademark of ALCOA.

VRS-12024 VRS-12025

12” x 12” 2 Triple 42 WATT MAXIMUM Since 1895

12” x 12” 2 Triple 42 WATT MAXIMUM

EEE

Specifications Lamp • Designed for two 4-pin triple tube amalgam or quad compact fluorescent lamps: 42/32/26W triple or 26W quad.

Ballast: Multi-Wattage/Voltage • Installed electronic high power factor, thermally protected. For lower wattages: Option -43.

• 120-277 multi-volt; 50-60 Hz. THD <10%.

• ClickQuick connectors for easy service.

• Single circuit wiring or see Option -84.

• Cold weather -22ºF (-30ºC).

• End of lamp life protection circuit. RFI filter.

• Internally fused. Also see Options -FS, -FD. • Dimming optional. See Option -39.

Reflector • Full size die formed specular Alzak® aluminum.

• Removable for servicing.

Trim / Lens Assembly • VRS-12024: Prismatic 3/16” high strength acrylic above 1/4” clear polycarbonate.

• VRS-12025: Injection molded prismatic polycarbonate drop bisymmetric distribution lens.

• Continuous extruded 6063-T6 tempered aluminum, non-removable lens clamps; four flush mounted center pin tamperproof screws with captive nuts.

• Tamperproof tool included.

Aluminum Housing • Super-strong 6063-T6 extruded and tempered.

• White polyester enamel finish.

• Rustproof: exceeds 1000 hour ASTM 5% salt spray test.

Outlet Box • Prewired 14 GA (NEC) galvanized steel, UL listed.

1/2” and 3/4” knockouts.

Installation • Two die-formed 7/8” vertically adjustable 16 gauge steel mounting yokes supplied.

• Recesses indoor or outdoor in covered locations.

Concrete Pour version available. See Option -78.

UL, C-UL (Canada) Listings • Wet, damp or dry locations, covered ceilings.

• Through-branch conductors (6 #12 AWG 90°C).

Three Year Limited Warranty • Complete standard fixture and ballast.

Performance at a Glance*

Maximum Security Exceptional Energy Efficiency EEE

For detailed ITL reports see www.kirlinlighting.com, data disk or submittal sheets.

VRS-12024 (2 Triple 42W)

VRS-12024

90˚ 75˚

Ceiling Cut-out 13” x 15½”

500

60˚

1000 1500 0˚

45˚ 15˚

30˚

EFFICIENCY: 65.8%

EEE

ITL TEST #52005

Cone of Light* Dist.

6 8 10 12 14 16

FC 41.6 23.4 15.0 10.4 7.6 5.8

Dia. 7.1 9.5 11.9 14.2 16.6 19.0

Energy Efficient Vandal Resistant & Maximum Security Lighting

High Efficiency 2x42W Recessed Squares

0° SC 1.2 90° SC 1.2 180° SC 1.1 LER=47.7 AEC=$5.03

VRS-12025 (2 Triple 42W)

VRS-12025 0

90˚ 75˚

450

60˚

900 1350 0˚

45˚

15˚

30˚

EFFICIENCY: 65.7%

EEE

ITL TEST #52007

Cone of Light* Dist.

6 8 10 12 14 16

FC 35.9 20.2 12.9 9.0 6.6 5.0

Dia. 7.9 10.5 13.2 15.8 18.4 21.1

0° SC 1.3 90° SC 1.4 180° SC 1.2 LER=46.8 AEC=$5.13

Options Ballast, Wattage and Voltage -39 Consult factory for installed electronic dimming ballast. Indoor use. 10°C (50°F) minimum start. Specify wattage, voltage and brand.

-43 Lower wattage: For 4-pin 2x18W triple or 2x18-13W quad. Specify wattage.

-84 Wired for two circuits. Also see -FD. -97 Specify other voltage. Consult factory.

-98 347 volt, 50/60 Hz. input. Consult factory.

Emergency Ballast - Specify Voltage1 Internal (factory installed) ballast, test switch and

1

indicator light. Suitable for damp locations from 0° to 50°C (32° to 122°F) or with Cold Weather version (see -CE) -20° to 55°C (-4° to 131°F).

-73 Internal 1-lamp EM ballast. Specify voltage.

-74 Internal 2-lamp EM ballast. Consult factory.

-CE Internal cold weather (-20° to 55°C) 1-lamp EM ballast. Specify voltage.

-HE1 Internal higher lumen (up to 1250) 1-lamp EM ballast. 13-42W only. Specify voltage.

Other -32 White oversize trim extender. Specify size.

-45 Gasket between trim and ceiling.

Visit www.kirlinlighting.com for most current performance / specifications.

Alzak® is a registered trademark of ALCOA.

-47 Wet plaster frame for wet plaster ceiling.

-78 Concrete pour box assembly for use in wet concrete. Following pour, fixture mounts within assembly.

-99 Special modification. Consult factory.

-FD Two additional in-line fuses. One per ballast.

Use with Option -84.

-FS Additional in-line fuse.

-LE With 4-pin electronic lamps. 3500°K standard.

82 CRI and 12,000 hour life. Specify wattage, style and color temperature.

* Photometric Definitions and Keys are shown on page 37. www.kirlinlighting.com

17

Energy Efficient Vandal Resistant & Maximum Security Lighting

VRS-12026 VRS-12027

12” x 12”

2 Triple 57 WATT MAXIMUM

12” x 12”

2 Triple 57 WATT MAXIMUM

Since 1895

High Lumen Output 2x57W Squares EEE

Specifications

Maximum Security Exceptional Energy Efficiency EEE

• Continuous extruded 6063-T6 tempered aluminum, non-removable lens clamps; four flush mounted center pin tamperproof screws with captive nuts.

• Tamperproof tool included.

Aluminum Housing • Super-strong 6063-T6 extruded and tempered.

• White polyester enamel finish.

• Rustproof: exceeds 1000 hour ASTM 5% salt spray test.

Outlet Box • Prewired 14 GA (NEC) galvanized steel, UL listed.

1/2” and 3/4” knockouts.

Installation • Two die-formed 7/8” vertically adjustable 16 gauge steel mounting yokes supplied.

• Recesses indoor or outdoor in covered locations.

• Concrete Pour version available. See Option -78.

UL, C-UL (Canada) Listings • Wet, damp or dry locations, covered ceilings.

• Through-branch conductors (6 #12 AWG 90°C).

Three Year Limited Warranty • Complete standard fixture and ballast.

Lamp • Designed for two 4-pin triple/four tube amalgam compact fluorescent lamps: 57W triple/four tube.

Ballast: Multi/Voltage • Installed electronic high power factor, thermally protected. For lower wattages: Option -43.

• 120-277 multi-volt; 50-60 Hz. THD <10%.

• ClickQuick connectors for easy service.

• Single circuit wiring or see Option -84.

• Cold weather -22ºF (-30ºC).

• End of lamp life protection circuit. RFI filter.

• Internally fused. Also see Options -FS, -FD. • Dimming optional. See Option -39.

Reflector • Full size die formed specular Alzak® aluminum.

• Removable for servicing.

Trim / Lens Assembly • VRS-12026: Tempered C#73 spread lens above 1/4” clear polycarbonate.

• VRS-12027: Injection molded prismatic polycarbonate drop bisymmetric distribution lens.

Performance at a Glance*

For detailed ITL reports see www.kirlinlighting.com, data disk or submittal sheets.

VRR-12026 (2 Triple 57W)

VRS-12026

90˚ 75˚

Ceiling Cut-out 13” x 15½”

700

60˚

1400 2100 0˚

45˚ 15˚

30˚

EFFICIENCY: 56.3%

EEE

ITL TEST #58937

Cone of Light* Dist.

6 8 10 12 14 16

FC 54.6 30.7 19.6 13.6 10.0 7.7

Dia. 7.0 9.3 11.7 14.0 16.3 18.7

0° SC 1.1 90° SC 1.2 180° SC 1.1 LER=39.0 AEC=$6.16

VRS-12027 (2 Triple 57W)

VRS-12027 0

90˚ 75˚

550

60˚

1100 1650 0˚

45˚

15˚

30˚

EFFICIENCY: 54.9%

EEE

ITL TEST #55036

Cone of Light* Dist.

6 8 10 12 14 16

FC 25.9 14.6 9.3 6.5 4.8 3.6

Dia. 11.3 15.0 18.8 22.6 26.3 30.1

0° SC 2.0 90° SC 1.3 180° SC 2.0 LER=38.7 AEC=$6.20

Options† Ballast, Wattage and Voltage -39 Consult factory for installed electronic dimming ballast. Indoor use. 10°C (50°F) minimum start. Specify wattage, voltage and brand.

-43 Lower wattage. VRS-12026: See VRS-12024; VRS-12027: See VRS-12025.

-84 Wired for two circuits. Also see -FD. -97 Specify other voltage. Consult factory.

-98 347 volt, 50/60 Hz. input. Consult factory.

Emergency Ballast - Specify Voltage1 Remote (field mounted) ballast, test switch and indicator light. Suitable for damp locations from 0° to 50°C (32° to 122°F) or with Cold Weather version (see -CR) -20° to 55°C (-4° to 131°F).

-75 Remote 1-lamp EM (57W) ballast. Specify voltage.

-CR Remote cold weather (-20° to 55°C) 1-lamp EM (57W) ballast. Specify voltage.

Other -32 White oversize trim extender. Specify size.

-45 Gasket between trim and ceiling.

1

18

Visit www.kirlinlighting.com for most current performance / specifications.

www.kirlinlighting.com

-47 Wet plaster frame for wet plaster ceiling.

-78 Concrete pour box assembly for use in wet concrete. Following pour, fixture mounts within assembly.

-99 Special modification. Consult factory.

-FD Two additional in-line fuses. One per ballast.

Use with Option -84.

-FS Additional in-line fuse.

-LE With 4-pin electronic lamps. 3500°K standard.

82 CRI and 12,000 hour life. Specify wattage, style and color temperature.

* Photometric Definitions and Keys are shown on page 37.

Alzak® is a registered trademark of ALCOA.

Since 1895

1’ x 4’

2

T8

VRT-12028

32 WATT MAXIMUM

Specifications Lamp • Designed for two bi-pin fluorescent lamps: 32 watt bi-pin T8.

Ballast • Installed electronic high power factor, thermally protected. RFI filter.

• 120 volt or see Options.

• Single circuit wiring or see Option -84.

• Internally fused. Also see Options -FS, -FD. • Dimming optional. See Option -39.

Reflector • Full size die formed specular Alzak® aluminum.

• Removable for servicing.

Trim / Lens Assembly • Prismatic 3/16” high strength acrylic above 1/4” clear polycarbonate.

• Continuous extruded 6063-T6 tempered aluminum, non-removable lens clamps; eight flush mounted center pin tamperproof screws with captive nuts.

Performance at a Glance*

• Tamperproof tool included.

Aluminum Housing • Super strong 6063-T6 extruded and tempered.

• White polyester enamel finish.

• Rustproof: Exceeds 1000 hour ASTM 5% salt spray test.

• Entire luminaire serviced through aperture.

Outlet Box • Prewired 14 GA (NEC) galvanized steel, UL listed.

1/2” and 3/4” knockouts.

Installation • Two die-formed 7/8” vertically adjustable 16 gauge steel mounting yokes supplied. NOT suitable for lay-in style ceilings. 7/8” diameter access hole.

• Recesses indoor or outdoor in covered locations.

UL, C-UL (Canada) Listings • Wet, damp or dry locations, covered ceilings.

• Through-branch conductors (6 #12 AWG 90°C).

Three Year Limited Warranty • Complete standard fixture and ballast.

Maximum Security

Exceptional Energy Efficiency EEE

For detailed ITL reports see www.kirlinlighting.com, data disk or submittal sheets.

VRT-12028

VRT-12028 (2 T8 32W) 90˚ 75˚ 700

60˚

1400

Ceiling Cut-out 12” x 487/8”

45˚

2100 0˚

15˚

30˚

EFFICIENCY: 73.9%

EEE

ITL TEST #46202

Energy Efficient Vandal Resistant & Maximum Security Lighting

Super Strong 1’x4’ with Exceptional Efficiency

Cone of Light* Dist.

6 8 10 12 14 16

FC 55.8 31.4 20.1 14.0 10.3 7.9

Dia. 6.1 8.1 10.1 12.1 14.2 16.2

0° SC 1.1 45° SC 1.0 90° SC 1.0 LER=53.9 AEC=$4.46

Options Ballast, Wattage and Voltage

Emergency Ballast - Specify Voltage1

Other

-39 Installed electronic dimming ballast. Indoor use. 10°C (50°F) minimum start. Specify wattage, voltage and brand.

-58 277 volt 60 Hz. ballast instead.

-84 Wired for two circuits. Also see -FD. -97 Specify other voltage. Consult factory.

-98 347 volt, 50/60 Hz. input. Consult factory.

Internal (factory installed) ballast, test switch and indicator light. Suitable for damp locations from 0° to 50°C (32° to 122°F) or with Cold Weather version (see -CE) -20° to 55°C (-4° to 131°F).

-73 Internal 1-lamp EM ballast. Specify voltage.

-CE Internal cold weather (-20° to 55°C) 1-lamp EM ballast. Specify voltage.

-45 Gasket between trim and ceiling.

-47 Plaster frame for wet plaster ceiling.

-48 Nightlight socket and ballast for 13 watt electronic compact fluorescent lamp.

-99 Special modification. Consult factory.

-FD Two aditional in-line fuses. One per ballast. Use with Option -84.

-FS Additional in-line fuse.

1

Visit www.kirlinlighting.com for most current performance / specifications.

Alzak® is a registered trademark of ALCOA.

* Photometric Definitions and Keys are shown on page 37. www.kirlinlighting.com

19

Energy Efficient Vandal Resistant & Maximum Security Lighting

VSS-12029 VSS-12030

12” x 12” 2 Triple 42 WATT MAXIMUM Since 1895

12” x 12” 2 Triple 42 WATT MAXIMUM

Surface Squares with Flat or Drop Lens Specifications

Maximum Security Exceptional Energy Efficiency EEE

• VSS-12030: Injection molded prismatic polycarbonate drop bisymmetric distribution lens.

• Continuous extruded 6063-T6 tempered aluminum, non-removable lens clamps; four flush mounted center pin tamperproof screws with captive nuts.

• Tamperproof tool included.

Aluminum Housing • Super-strong 6063-T6 extruded and tempered.

• White polyester enamel finish.

• Rustproof: exceeds 1000 hour ASTM 5% salt spray test.

Installation • Secure with 3/8” lag or molly bolts to ceiling support structure. 7/8” diameter access hole with four 1/2” diameter mounting holes.

• Installs indoor or outdoor in covered locations.

UL, C-UL (Canada) Listings • Wet, damp or dry locations, covered ceilings.

Three Year Limited Warranty • Complete standard fixture and ballast.

Lamp • Designed for two 4-pin triple tube amalgam or quad compact fluorescent lamps: 42/32/26W triple or 26W quad.

Ballast: Multi-Wattage/Voltage • Installed electronic high power factor, thermally protected. For lower wattages: Option -43.

• 120-277 multi-volt; 50-60 Hz. THD <10%.

• ClickQuick connectors for easy service.

• Single circuit wiring or see Option -84.

• Cold weather -22ºF (-30ºC).

• End of lamp life protection circuit. RFI filter.

• Internally fused. Also see Options -FS, -FD. • Dimming optional. See Option -39.

Reflector • Full size die formed specular Alzak® aluminum.

• Removable for servicing.

Trim / Lens Assembly • VSS-12029: Prismatic 3/16” high strength acrylic above 1/4” clear polycarbonate.

Performance at a Glance*

For detailed ITL reports see www.kirlinlighting.com, data disk or submittal sheets.

VSS-12029 (2 Triple 42W) 90˚

VSS-12029

75˚ 500

60˚

1000 1500 0˚

45˚ 15˚

30˚

EFFICIENCY: 65.8%

EEE

ITL TEST #52005

VSS-12030

Cone of Light* Dist.

6 8 10 12 14 16

FC 41.6 23.4 15.0 10.4 7.6 5.8

Dia. 7.1 9.5 11.9 14.2 16.6 19.0

0° SC 1.2 90° SC 1.2 180° SC 1.1 LER=47.7 AEC=$5.03

VSS-12030 (2 Triple 42W) 0

90˚ 75˚

450

60˚

900 1350 0˚

45˚

15˚

30˚

EFFICIENCY: 65.7%

EEE

ITL TEST #52007

Cone of Light* Dist.

6 8 10 12 14 16

FC 35.9 20.2 12.9 9.0 6.6 5.0

Dia. 7.9 10.5 13.2 15.8 18.4 21.1

0° SC 1.3 90° SC 1.4 180° SC 1.2 LER=46.8 AEC=$5.13

Options Ballast, Wattage and Voltage -39 Consult factory for installed electronic dimming ballast. Indoor use. 10°C (50°F) minimum start. Specify wattage, voltage and brand.

-43 Lower wattage. For 4-pin 2x18W triple or 2x18-13W quad. Specify wattage.

-84 Wired for two circuits. Also see -FD. -97 Specify other voltage. Consult factory.

-98 347 volt, 50/60 Hz. input. Consult factory.

Emergency Ballast - Specify Voltage1 Internal (factory installed) ballast, test switch and indicator light. Suitable for damp locations from

1

20

0° to 50°C (32° to 122°F) or with Cold Weather version (see -CE) -20° to 55°C (-4° to 131°F).

-73 Internal 1-lamp EM ballast. Specify voltage.

-74 Internal 2-lamp EM ballast. Consult factory.

-CE Internal cold weather (-20° to 55°C) 1-lamp EM ballast. Specify voltage.

-HE1 Internal higher lumen (up to 1250) 1-lamp EM ballast. 13-42W only. Specify voltage.

-99 Special modification. Consult factory.

-FD Two additional in-line fuses. One per ballast.

Use with Option -84.

-FS Additional in-line fuse.

-LE With 4-pin electronic lamps. 3500°K standard.

82 CRI and 12,000 hour life. Specify wattage, style and color temperature.

Luminaire (Housing) Finishes -35 -36 -37 -38 -94

Natural aluminum acrylic enamel.

Gold acrylic enamel.

Dark Bronze acrylic enamel.

Black acrylic enamel.

Custom color/finish. Specify. Consult factory.

Visit www.kirlinlighting.com for most current performance / specifications.

www.kirlinlighting.com

Other

* Photometric Definitions and Keys are shown on page 37.

Alzak® is a registered trademark of ALCOA.

VSS-12031 VSS-12032

12” x 12” 2 Triple 57 WATT MAXIMUM Since 1895

12” x 12” 2 Triple 57 WATT MAXIMUM

Specifications

• VSS-12032: Injection molded prismatic polycarbonate drop bisymmetric distribution lens.

• Continuous extruded 6063-T6 tempered aluminum, non-removable lens clamps; four flush mounted center pin tamperproof screws with captive nuts.

• Tamperproof tool included.

Aluminum Housing • Super-strong 6063-T6 extruded and tempered.

• White polyester enamel finish.

• Rustproof: exceeds 1000 hour ASTM 5% salt spray test.

Installation • Secure with 3/8” lag or molly bolts to ceiling support structure. 7/8” diameter access hole with four 1/2” diameter mounting holes.

• Installs indoor or outdoor in covered locations.

UL, C-UL (Canada) Listings • Wet, damp or dry locations, covered ceilings.

Three Year Limited Warranty • Complete standard fixture and ballast.

Lamp • Designed for two 4-pin triple/four tube amalgam or quad compact fluorescent lamps: 57W triple/four tube.

Ballast: Multi/Voltage • Installed electronic high power factor, thermally protected. For lower wattages: Option -43.

• 120-277 multi-volt; 50-60 Hz. THD <10%.

• ClickQuick connectors for easy service.

• Single circuit wiring or see Option -84.

• Cold weather -22ºF (-30ºC).

• End of lamp life protection circuit. RFI filter.

• Internally fused. Also see Options -FS, -FD. • Dimming optional. See Option -39.

Reflector • Full size die formed specular Alzak® aluminum.

• Removable for servicing.

Trim / Lens Assembly • VSS-12031: Tempered C#73 spread lens above 1/4” clear polycarbonate.

Performance at a Glance*

Maximum Security Exceptional Energy Efficiency EEE

For detailed ITL reports see www.kirlinlighting.com, data disk or submittal sheets.

VSS-12031 (2 Triple 57W)

VSS-12031

90˚ 75˚ 700

60˚

1400 2100 0˚

45˚ 15˚

30˚

EFFICIENCY: 56.3%

EEE

ITL TEST #58937

Cone of Light* Dist.

6 8 10 12 14 16

FC 54.6 30.7 19.6 13.6 10.0 7.7

Dia. 7.0 9.3 11.7 14.0 16.3 18.7

Energy Efficient Vandal Resistant & Maximum Security Lighting

Surface Squares 2x57W for High Ceilings

0° SC 1.1 90° SC 1.2 180° SC 1.1 LER=39.0 AEC=$6.16

VSS-12032 (2 Triple 57W)

VSS-12032 0

90˚ 75˚

550

60˚

1100 1650 0˚

45˚

15˚

30˚

EFFICIENCY: 54.9%

EEE

ITL TEST #55036

Cone of Light* Dist.

6 8 10 12 14 16

FC 25.9 14.6 9.3 6.5 4.8 3.6

Dia. 11.3 15.0 18.8 22.6 26.3 30.1

0° SC 2.0 90° SC 1.3 180° SC 2.0 LER=38.7 AEC=$6.20

Options Ballast, Wattage and Voltage -39 Consult factory for installed electronic dimming ballast. Indoor use. 10°C (50°F) minimum start. Specify wattage, voltage and brand.

-43 Lower wattage. VSS-12031: See VSS12029; VSS-12032: See VSS-12030.

-84 Wired for two circuits. Also see -FD. -97 Specify other voltage. Consult factory.

-98 347 volt, 50/60 Hz. input. Consult factory.

Emergency Ballast - Specify Voltage1 Remote (field mounted) ballast, test switch and

1

indicator light. Suitable for damp locations from 0° to 50°C (32° to 122°F) or with Cold Weather version (see -CR) -20° to 55°C (-4° to 131°F).

-75 Remote 1-lamp EM (57W) ballast. Specify voltage.

-CR Remote cold weather (-20° to 55°C) 1-lamp EM (57W) ballast. Specify voltage.

Luminaire (Housing) Finishes -35 -36 -37 -38 -94

-99 Special modification. Consult factory.

-FD Two additional in-line fuses. One per ballast.

Use with Option -84.

-FS Additional in-line fuse.

-LE With 4-pin electronic lamps. 3500°K standard.

82 CRI and 12,000 hour life. Specify wattage, style and color temperature.

Natural aluminum acrylic enamel.

Gold acrylic enamel.

Dark Bronze acrylic enamel.

Black acrylic enamel.

Custom color/finish. Specify. Consult factory.

Visit www.kirlinlighting.com for most current performance / specifications.

Alzak® is a registered trademark of ALCOA.

Other

* Photometric Definitions and Keys are shown on page 37. www.kirlinlighting.com

21

Energy Efficient Vandal Resistant & Maximum Security Lighting

VST-12033

1’ x 4’

2

T8

Since 1895

32 WATT MAXIMUM

Super Strong and Efficient Surface 1’x4’ Specifications

Maximum Security

Exceptional Energy Efficiency EEE

Lamp • Designed for two bi-pin fluorescent lamps: 32 watt bi-pin T8.

Ballast • Installed electronic high power factor, thermally protected. RFI filter.

• 120 volt or see Options.

• Single circuit wiring or see Option -84.

• Internally fused. Also see Options -FS, -FD. • Dimming optional. See Option -39.

Reflector • Full size die formed specular Alzak® aluminum.

• Removable for servicing.

Trim / Lens Assembly • Prismatic 3/16” high strength acrylic above 1/4” clear polycarbonate.

• Continuous extruded 6063-T6 tempered aluminum, non-removable lens clamps; eight

Performance at a Glance*

flush mounted center pin tamperproof screws with captive nuts.

• Tamperproof tool included.

Aluminum Housing • Super strong 6063-T6 extruded and tempered.

• White polyester enamel finish.

• Rustproof: Exceeds 1000 hour ASTM 5% salt spray test.

• Entire luminaire serviced through aperture.

Installation • Secure with 3/8” lag or molly bolts to ceiling support structure. 7/8” diameter access hole with four 1/2” diameter mounting holes.

• Installs indoor or outdoor in covered locations.

UL, C-UL (Canada) Listings • Wet, damp or dry locations, covered ceilings.

Three Year Limited Warranty • Complete standard fixture and ballast.

For detailed ITL reports see www.kirlinlighting.com, data disk or submittal sheets.

VST-12033

VST-12033 (2 T8 32W) 90˚ 75˚ 700

60˚

1400 2100 0˚

45˚ 15˚

30˚

EFFICIENCY: 73.9%

EEE

ITL TEST #46202

Cone of Light* Dist.

6 8 10 12 14 16

FC 55.8 31.4 20.1 14.0 10.3 7.9

Dia. 6.1 8.1 10.1 12.1 14.2 16.2

0° SC 1.1 45° SC 1.0 90° SC 1.0 LER=53.9 AEC=$4.46

Options Ballast, Wattage and Voltage

Emergency Ballast - Specify Voltage1

Housing

-39 Installed electronic dimming ballast. Indoor use. 10°C (50°F) minimum start. Specify wattage, voltage and brand.

-58 277 volt 60 Hz. ballast instead.

-84 Wired for two circuits. Also see -FD. -97 Specify other voltage. Consult factory.

-98 347 volt, 50/60 Hz. input. Consult factory.

Internal (factory installed) ballast, test switch and indicator light. Suitable for damp locations from 0° to 50°C (32° to 122°F) or with Cold Weather version (see -CE) -20° to 55°C (-4° to 131°F).

-73 Internal 1-lamp EM ballast. Specify voltage.

-CE Internal cold weather (-20° to 55°C) 1-lamp EM ballast. Specify voltage.

-94 Custom color/finish. Specify. Consult factory.

1

22

Visit www.kirlinlighting.com for most current performance / specifications.

www.kirlinlighting.com

Other -48 Nightlight socket and ballast for 13 watt electronic compact fluorescent lamp.

-99 Special modification. Consult factory.

-FD Two aditional in-line fuses. One per ballast.

Use with Option -84.

-FS Additional in-line fuse.

* Photometric Definitions and Keys are shown on page 37.

Alzak® is a registered trademark of ALCOA.

Since 1895

8” x 1’

1 Triple 57 WATT MAXIMUM

8” x 4’

2

T8

VCT-08034 VCT-08035

32 WATT MAXIMUM

Specifications Lamp • Designed for compact fluorescent lamp(s): VCT-08034: one 57W triple/four tube.

VCT-08035: two 32 watt bi-pin T8.

Ballast • Installed electronic high power factor, thermally protected. RFI filter. For lower wattages, see Option -43.

• VCT-08034: 120-277 multi-volt; 50-60 Hz. THD <10%. End of lamp life protection circuit.

• VCT-08035: 120 volt or see Options. Single circuit wiring or see Option -84.

• Internally fused. Also see Options -FS, -FD. • Dimming optional. See Option -39.

Reflector • Full size die formed specular Alzak® aluminum.

• Removable for servicing.

Lens • Prismatic 3/16” high strength acrylic above 1/4” clear polycarbonate.

• Continuous extruded 6063-T6 tempered aluminum, non-removable lens clamps; four or eight flush mounted center pin tamperproof screws with captive nuts.

• Tamperproof tool included.

Aluminum Housing • Super strong 6063-T6 extruded and tempered.

• White polyester enamel finish.

• Rustproof: Exceeds 1000 hour ASTM 5% salt spray test.

• Entire luminaire serviced through aperture.

Installation • Secure with 3/8” lag or molly bolts to ceiling and/or wall structure.

• Two 7/8” diameter access holes (ceiling and wall) with four 1/2” diameter mounting holes.

• Installs indoor or outdoor on all corners, horizontal (ceiling-wall) or vertical (wall-wall), in covered locations.

UL, C-UL (Canada) Listings • Wet, damp or dry locations, covered ceilings.

Three Year Limited Warranty • Complete standard fixture and ballast.

Performance at a Glance*

VCT-08034

Maximum Security Exceptional Energy Efficiency EEE

For detailed ITL reports see www.kirlinlighting.com, data disk or submittal sheets.

VCT-08035

VCT-08034 (1 Triple 57W)

VCT-08034-43 (1 Triple 42W)

0

0

90˚

60˚

1200 1800 0˚

45˚

15˚

400

Options Ballast, Wattage and Voltage -39 Installed electronic dimming ballast. Indoor use. 10°C (50°F) minimum start. Specify wattage, voltage and brand.

-43 Lower wattage. VCT-08034: for 42/32/26W triple or 26W quad (multi-wattage/voltage).

Specify wattage.

-84 Wired for two circuits. Also see -FD. (VCT-08035 only) -97 Specify other voltage. Consult factory.

-98 347 volt, 50/60 Hz. input. Consult factory.

1

45˚

15˚

30˚

2100 0˚

0° SC 2.4 90° SC 1.3 180° SC 0.5 EFFICIENCY: 70.9% ITL TEST #58938 LER=46.0 AEC=$5.22

60˚

1400

45˚

15˚

30˚

0° SC 2.5 90° SC 1.3 180° SC 0.5

EEE

EFFICIENCY: 72.6% ITL TEST #46311 LER=52.8 AEC=$4.54

Emergency Ballast - Specify Voltage1

Housing

Internal (factory installed) ballast, test switch and indicator light. Suitable for damp locations from 0° to 50°C (32° to 122°F) or with Cold Weather version (see -CE) -20° to 55°C (-4° to 131°F). to 55°C (-4° to 131°F).

-73 Internal 1-lamp EM ballast for VCT-08035.

-75 Remote 1-lamp EM ballast for VCT-08034.

-CE Internal cold weather (-20° to 55°C) 1-lamp EM ballast for VCT-08035. Specify voltage.

-CR Remote cold weather (-20° to 55°C) 1-lamp EM ballast for VCT-08034. Specify voltage.

-HR1 Remote higher lumen (up to 1250) 1-lamp EM ballast for VCT-08034. 13-42W only.

-94 Custom color/finish. Specify. Consult factory.

Visit www.kirlinlighting.com for most current performance / specifications.

Alzak® is a registered trademark of ALCOA.

EFFICIENCY: 77.4% ITL TEST #58939 LER=50.5 AEC=$4.75

75˚ 700

60˚

800

0° SC 2.4 90° SC 1.3 180° SC 0.5

EEE

90˚

75˚

1200 0˚

30˚

0

90˚

75˚ 600

VCT-08035 (2 T8 32W)

Energy Efficient Vandal Resistant & Maximum Security Lighting

High Efficiency 1’ and 4’ Cornice Mounts

Other -48 Nightlight socket and ballast for 13 watt electronic compact fluorescent lamp.

-99 Special modification. Consult factory.

-FS Additional in-line fuse.

-FD Two aditional in-line fuses. One per ballast. Use with Option -84. (VCT-08035 only) -LE With 4-pin electronic lamp. 3500°K standard.

82 CRI and 12,000 hour life. Specify wattage, style and color temperature. (VCT-08034 only)

* Photometric Definitions and Keys are shown on page 37. www.kirlinlighting.com

23

Energy Efficient Vandal Resistant & Maximum Security Lighting

VNT-07036

Since 1895

7” x 9” 1 Quad 13 WATT MAXIMUM

Vandal Resistant NightLight: Quad 13 Specifications • Secured to housing by four center pin tamperproof screws and captive nuts.

• Gasketing between faceplate and wall.

• Tamperproof tool included.

Housing • 16 gauge galvanized steel, formed and welded.

• White acrylic enamel finish.

Installation • Recesses indoors or outdoors, covered locations.

• Minimum operating temperature: -22ºF (-30ºC).

• Ten 1/2” T.S. (7/8” dia.) wiring KO’s.

• Mounting holes provided on top, bottom and ends for direct mounting to masonry or steel studs.

• Concrete Pour version available. See Option -78.

UL, C-UL (Canada) Listings • Damp or dry locations, covered ceilings.

• Through-branch conductors (6 #12 AWG 90°C).

Three Year Limited Warranty • Complete standard fixture and ballast.

Lamp • Designed for one horizontal 4-pin electronic quad 13W compact fluorescent lamp.

Ballast: Multi-Voltage • Installed electronic high power factor, thermally protected.

• 120-277 multi-volt; 50-60 Hz. THD <10%.

• ClickQuick connectors for easy service.

• Cold weather -22ºF (-30ºC).

• End of lamp life protection circuit. RFI filter.

• Internally fused. Also see Option -FS. Lens (Gasketed) • Clear 1/4” polycarbonate behind louver.

• Secured between faceplate and housing by four center pin tamperproof screws and captive nuts.

• Gasketing between lens and faceplate.

Faceplate (Gasketed) • White polyester enameled die-formed 16 gauge galvanized steel. Removable for servicing.

Acrylic Lens Option -17

Performance at a Glance

For detailed ITL reports see www.kirlinlighting.com, data disk or submittal sheets.

VNT-07036 VNT-07036 (1 Quad 13W)

0

90˚ 75˚

20 0° SC 1.3 90° SC 1.4 180° SC 1.4 ITL TEST #54808 LER=34.3 AEC=$6.99

STANDARD TRIM

Footcandle Performance On the Floor Installed Top View

60˚

40 60 0˚

45˚

15˚

30˚

Lens Option -17

Housing KO’s

Options† Wattage and Voltage

Luminaire (Faceplate/Frame) Finishes

Other

-43 -75 -97 -98

-35 -36 -37 -38 -94

-78 -99 -FS -LE

Lower wattage: for 4-pin 9W twin.

Remote battery pack. Consult factory.

Specify other voltage. Consult factory.

347 volt, 50/60 Hz. input. Consult factory.

Lens -17 Prismatic .187” high strength prismatic acrylic behind .220” clear polycarbonate and door (instead of louver).

Natural aluminum acrylic enamel.

Gold acrylic enamel.

Dark Bronze acrylic enamel.

Black acrylic enamel.

Custom color/finish. Specify. Consult factory.

Concrete pour modification.

Special modification. Consult factory.

Additional in-line fuse.

With 4-pin electronic lamp. 3500°K standard. 82 CRI and 12,000 hour life. Specify wattage, style and color temperature.

* Photometric Definitions and Keys are shown on page 37.

24

www.kirlinlighting.com

Since 1895

7” x 9”

LED

3” x 7”

LED

VNT-07037 VNT-03038

Specifications

• Tamperproof tool included.

Faceplate - VNT-03038 (Gasketed) • Gasketed aluminum trim; white finish standard.

• Secured to housing with two center pin tamperproof screws and captive nuts.

• Tamperproof tool included.

Housing • VNT-07037: 16 gauge galvanized steel, formed and welded. White acrylic enamel finish.

• VNT-03038: Super shallow 2½” depth. Cool.

Acrylic enameled aluminum. Rustproof: Exceeds 1000 hour hour ASTM 5% salt spray test.

Installation • Recesses indoors or outdoors, covered locations.

• Minimum operating temperature: -4°F (-20°C).

• Ten 1/2” T.S. (7/8” dia.) wiring KO’s. (VNT-07037) • Mounting holes provided on top, bottom and ends (and rear for VNT-07037).

UL, C-UL (Canada) Listings • Damp or dry locations, covered ceilings.

Three Year Limited Warranty • Complete standard fixture and power supply / driver.

LED • White recessed module (colors optional).

• VNT-07037: 2.6 watts (34 lumens) VNT-03038: 1.3 watts (17 lumens) LED Power Supply / Driver • 10 volt DC. Electronically stabilized.

• Minimum operating temperature -4°F (-20°C).

• 120 volt standard. Load insensitive.

Lens (Gasketed) • VNT-07037: 1/4” clear polycarbonate behind louver.

• VNT-03038: 1/8” white polycarbonate.

• Secured between faceplate and housing by center pin tamperproof screws and captive nuts.

• Gasketing between lens and faceplate.

Faceplate - VNT-07037 (Gasketed) • White polyester enameled die-formed 16 gauge galvanized steel. Removable for servicing.

• Secured to housing with four center pin tamperproof screws and captive nuts.

• Gasketing between faceplate and wall.

Performance at a Glance

Exceptional Energy Efficiency EEE

For detailed ITL reports see www.kirlinlighting.com, data disk or submittal sheets.

VNT-07037

Footcandle Performance On the Floor Installed Top View

STANDARD TRIM

Lens Option -17

Energy Efficient Vandal Resistant & Maximum Security Lighting

LED Nightlight and StepLight

Housing KO’s

VNT-03038

Footcandle Performance Opposite Fixture Installed Top View

EEE

Options Wattage and Voltage

LED Colors

Luminaire (Faceplate/Frame) Finishes

-58 -75 -97 -98

-BL -GN -OR -RA -YE

-35 -36 -37 -38 -94

277 volt, 60 Hz. ballast. Consult factory.

Remote battery pack. Consult factory.

Specify other voltage. Consult factory.

347 volt, 50/60 Hz. input. Consult factory.

Blue LED module instead.

Green LED module instead.

Orange LED module instead.

Red/Amber LED module instead.

Yellow LED module instead.

Natural aluminum acrylic enamel.

Gold acrylic enamel.

Dark Bronze acrylic enamel.

Black acrylic enamel.

Custom color/finish. Specify. Consult factory.

Other -99 Special modification. Consult factory.

www.kirlinlighting.com

25

Energy Efficient Vandal Resistant & Maximum Security Lighting

VNS-05039 VNS-05040

5” x 5”

LED

5” x 5”

LED

Since 1895

LED Square MarkerLight / Eyelid NightLight Specifications

Exceptional Energy Efficiency EEE

• Secured to housing with two center pin tamperproof screws and captive nuts.

• Tamperproof tool included.

Housing: Shallow 2” • 4” x 4” x 2” standard U. L. listed 2-gang galvanized steel outlet box.

• Faceplate removable for servicing.

Installation • Recesses in wall indoor or outdoor, covered locations. Minimum operating temp. -4°F (-20°C).

• Mounting holes provided on top, bottom and ends.

UL, C-UL (Canada) Listings • Damp or dry locations, covered ceilings.

Three Year Limited Warranty • Complete standard fixture and power supply / driver.

LED • White recessed module (colors optional).

• 4.4 watts - energy efficient, uniform, cool.

• 108 lumens typical.

LED Power Supply / Driver • 10 volt DC. Electronically stabilized.

• Minimum operating temperature -4°F (-20°C).

• 120 volt standard. Load insensitive.

Lens (Gasketed) • VNS-05039: 1/8” white polycarbonate.

• VNS-05040: Tempered Industrix glass behind 1/8” clear polycarbonate.

• Gasketing between lens and faceplate.

Faceplate (Gasketed) • Gasketed aluminum trim.

• White finish standard. Optional colors.

Performance at a Glance

For detailed ITL reports see www.kirlinlighting.com, data disk or submittal sheets.

Footcandle Performance Opposite Fixture Installed Top View

VNS-05039

EEE

MarkerLight

Footcandle Performance On the Floor Installed Top View

VNS-05040

EEE

NightLight

Options† LED Colors

Faceplate Finishes

Voltage / Battery Pack

-BL -GN -RA -YE

-35 -36 -37 -38 -94

-75 Remote emergency battery pack. Consult factory.

-97 Other voltage input. Consult factory.

-98 347 volt, 50/60 Hz. input. Consult factory.

Blue LED panel instead.

Green LED panel instead.

Red/Amber LED panel instead.

Yellow LED panel instead.

Natural aluminum acrylic enamel.

Gold acrylic enamel.

Dark Bronze acrylic enamel.

Black acrylic enamel.

Custom color/finish. Specify. Consult factory.

Other -99 Special modification. Consult factory.

26

www.kirlinlighting.com

Since 1895

5”

LED

5”

LED

VNR-05041 VNR-05042

Specifications • Secured to housing with two center pin tamperproof screws and captive nuts.

• Tamperproof tool included.

Housing: Shallow 2” • 4” x 2” standard U. L. listed octagon galvanized steel outlet box.

• Faceplate removable for servicing.

Installation • Recesses in wall indoor or outdoor, covered locations. Minimum operating temp. -4°F (-20°C).

• Mounting holes provided on top and bottom.

UL, C-UL (Canada) Listings • Damp or dry locations, covered ceilings.

Three Year Limited Warranty • Complete standard fixture and power supply / driver.

LED • White recessed module (colors optional).

• 4.4 watts - energy efficient, uniform, cool.

• 108 lumens typical.

LED Power Supply / Driver • 10 volt DC. Electronically stabilized.

• Minimum operating temperature -4°F (-20°C).

• 120 volt standard. Load insensitive.

Lens (Gasketed) • VNR-05041: translucent white 1/8” polycarbonate.

• VNR-05042: Tempered Industrix glass behind 1/8” clear polycarbonate.

• Gasketing between lens and faceplate.

Faceplate (Gasketed) • Gasketed aluminum trim.

• White finish standard. Optional colors.

Performance at a Glance

Exceptional Energy Efficiency EEE

For detailed ITL reports see www.kirlinlighting.com, data disk or submittal sheets.

VNR-05041

Footcandle Performance Opposite Fixture Installed Top View

Energy Efficient Vandal Resistant & Maximum Security Lighting

LED Round MarkerLight / Eyelid NightLight

EEE

MarkerLight

VNR-05042

Footcandle Performance On the Floor Installed Top View

EEE

NightLight

Options LED Colors

Faceplate Finishes

Voltage / Battery Pack

-BL -GN -RA -YE

-35 -36 -37 -38 -94

-75 Remote emergency battery pack. Consult factory.

-97 Other voltage input. Consult factory.

-98 347 volt, 50/60 Hz. input. Consult factory.

Blue LED panel instead.

Green LED panel instead.

Red/Amber LED panel instead.

Yellow LED panel instead.

Natural aluminum acrylic enamel.

Gold acrylic enamel.

Dark Bronze acrylic enamel.

Black acrylic enamel.

Custom color/finish. Specify. Consult factory.

Other -99 Special modification. Consult factory.

www.kirlinlighting.com

27

Energy Efficient Vandal Resistant & Maximum Security Lighting

VRR-10043 VRR-12044

10”

QL

85 WATT MAXIMUM

12”

QL

85 WATT MAXIMUM

Since 1895

QL Induction With Extraordinary Lamp Life Specifications

Black OptiGroove Option -OG

Exceptional Energy Efficiency EEE

• Continuous ring secures lens to trim.

• Tamperproof tool included.

Aluminum Housing • Acrylic enameled. Rustproof: Exceeds 1000 hour ASTM 5% salt spray test.

• Lightweight: Minimizes ceiling load.

• Cool operation: Extends component life.

• Entire luminaire serviced through aperture.

• Built-in plaster frame.

Outlet Box and Thermal Protection • Prewired 14 GA (NEC) galvanized steel, UL listed.

1/2” and 3/4” knockouts.

• Thermal protector (per current NEC) included.

Installation • 27” galvanized hanger bars with adjustable mounting brackets (2) supplied.

• Recesses indoor or outdoor in covered locations.

UL, C-UL (Canada) Listings • Wet, damp or dry locations, covered ceilings.

• Through-branch conductors (6 #12 AWG 90°C).

Three Year Limited Warranty • Complete standard fixture and generator.

Lamp Vessel (Included) • One vertical QL lamp vessel: 85W (maximum).

• See Option -43 for lower wattages.

• Electrode-less induction lamp vessel with power coupler.

• 100,000 hour system life, 6000 initial lumens.

• Indoor or outdoor use. -30oF rated.

• 3000oK standard. Add Option -LT for 4000oK. Generator • Electronic high frequency generator.

• 120 volt standard.

• For other input voltages, see Option -97.

Reflector • Specular Alzak® aluminum.

Trim / Lens Assembly • Vandal resistant smooth white seamless tapered aluminum self-flanged flare trim or see -OG. • Flush center pin tamperproof hex screws and captive nuts secure trim to housing.

• Prismatic 3/16” high strength acrylic above 1/4” clear polycarbonate.

Performance at a Glance*

For detailed ITL reports see www.kirlinlighting.com, data disk or submittal sheets.

VRR-10043

VRR-10043 (QL 85W) 90˚ 75˚ 450

60˚

900

45˚

1350 0˚

15˚

Dia. 7.0 9.3 11.6 14.0 16.3 18.6

ITL TEST #59129 LER=35.3 AEC=$6.81

EFFICIENCY: 47.0%

VRR-12044

FC 35.5 20.0 12.8 8.9 6.5 5.0 SC = 1.2

30˚

Ceiling Cut-out 10½” Dia. Option -OG Also Shown

Cone of Light* Dist.

6 8 10 12 14 16

VRR-12044 (QL 85W) 90˚ 75˚ 650

60˚

1300

45˚

1950 0˚

Ceiling Cut-out 12¼” Dia. Option -OG Also Shown

15˚

30˚

EFFICIENCY: 55.6%

Cone of Light* Dist.

6 8 10 12 14 16

FC 54.1 30.5 19.5 13.5 9.9 7.6

Dia. 6.2 8.3 10.3 12.4 14.5 16.5

SC = 1.0 ITL TEST #59130 LER=41.8 AEC=$5.74

EEE

Options† Generator, Wattage and Voltage

Lenses and Trims

Other

-43

-32 -45 -46 -94 -FR -OG -UV

-79 Extension collar for ceilings up to 2” thick.

-99 Special modification. Consult factory.

Lower wattage. QL 55W. Specify voltage.

-58 277 volt 60 Hz. generator.

-97 Other input voltage. Consult factory.

White oversize trim ring. Specify O.D. Gasket between ceiling and trim.

Gasket between trim and lens.

Custom color/finish. Specify. Consult factory.

Fresnel tempered lens instead for VRR-10043.

Black OptiGroove flare trim instead. (CP x .95) UV filter. Consult factory.

-LT

With 4000oK lamp vessel instead of standard 3000oK lamp.

* Photometric Definitions and Keys are shown on page 37.

28

www.kirlinlighting.com

Alzak® is a registered trademark of ALCOA.

Since 1895

7”

1 ED17

100 WATT MAXIMUM

7”

1 ED17

150 WATT MAXIMUM

VRR-07045 VRR-07046

Specifications Lamp • Designed for pulse start metal halide lamp: VRR-07045: 100W medium base ED17.

VRR-07046: 150W medium base ED17.

• See Option -43 for lower wattages.

Socket • Medium base. Pulse rated.

• Glazed porcelain. Silicone leads.

Reflector • Specular ellipsoidal Alzak® aluminum.

Trim / Lens Assembly • Vandal resistant smooth white seamless tapered aluminum self-flanged trim or see Option -OG. • Flush center pin tamperproof hex screws and captive nuts secure trim to housing.

• Lens: UV absorbing tempered prismatic C#73 above 3/16” clear tempered glass.

• Continuous ring secures lens to trim.

• Tamperproof tool included.

Ballast Assembly: Specify Voltage • WhisperPackTM fully encapsulated 180oC rated HPF pulse start ballast.

• Class H, high reactance for 120 volt and Options -65, -66; linear reactor for 277 volt.

• Capacitor and ignitor supplied.

• Dimming (-39) and electronic (-96) ballasts available. See Options.

• Cool, quiet, long-life. Silicone leads.

• Visible and easily serviced in all ceilings.

Fuse • Fused primary. Renewable. Aids servicing.

Aluminum Housing • Acrylic enameled. Rustproof: Exceeds 1000 hour ASTM 5% salt spray test.

• Lightweight: Minimizes ceiling load.

• Cool operation: Extends component life.

• Entire luminaire serviced through aperture.

• Built-in plaster frame.

Outlet Box • Prewired 14 GA (NEC) galvanized steel, UL listed.

1/2” and 3/4” knockouts.

Installation • 27” galvanized hanger bars with adjustable mounting brackets (2) supplied.

• Recesses indoor or outdoor in covered locations.

UL, C-UL (Canada) Listings • Wet, damp or dry locations, covered ceilings.

• Through-branch conductors (6 #12 AWG 90°C).

Three Year Limited Warranty • Complete standard fixture and ballast.

Thermal Protection • Per current NEC.

Performance at a Glance*

Black OptiGroove Option -OG

Exceptional Energy Efficiency EEE

For detailed ITL reports see www.kirlinlighting.com, data disk or submittal sheets.

VRR-07045

VRR-07045 (100W Coated Lamp) 90˚

Ceiling Cut-out 8” Dia.

75˚ 1200

60˚

2400 27" [686mm]

Option -OG Also Shown

161 2" [419mm]

45˚

3600 0˚ 117 8" sq [302mm]

EEE

15˚

30˚

EFFICIENCY: 52.0% ITL TEST #59131

VRR-07046

Cone of Light* Dist.

6 8 10 12 14 16

FC 86.2 48.5 31.0 21.6 15.8 12.1

Dia. 6.5 8.7 10.8 13.0 15.2 17.3

Energy Efficient Vandal Resistant & Maximum Security Lighting

Small Aperture Pulse Start Metal Halide

0° SC 0.7 90° SC 1.2 180° SC 1.0 LER=37.9 AEC=$6.33

VRR-07046 (150W Clear Lamp) 90˚ 161 2" [419mm]

75˚ 1500

60˚

3000

Ceiling Cut-out 8” Dia.

45˚

4500 0˚

15˚

30˚

Cone of Light* Dist.

FC 6 115.4 8 64.9 10 41.5 12 28.8 14 21.2 16 16.2

Dia. 7.3 9.7 12.1 14.5 17.0 19.4

SC = 1.1

EFFICIENCY: 49.6% ITL TEST #59134

LER=41.7 AEC=$5.76

Option -OG Also Shown

Options Sources and Ballasts -24 HPS ballast instead. Specify wattage and voltage.

-39 Electronic dimming ballast instead, for pulse start metal halide. Consult factory for wattage and voltage availability.

-96 Regulating electronic MH ballast instead.

Wattage and Voltage -43 Lower wattage: VRR-07045: 50-70 pulse, 35-70 HPS; VRR-07046: 50-125 pulse, 35-100 HPS. Specify voltage.

-120 120 volt, 60 Hz. ballast.

-277 277 volt, 60 Hz. ballast.

Alzak® is a registered trademark of ALCOA.

-347 347 volt, 60 Hz. ballast. Consult factory for dimming or electronic.

-97 Other voltage ballast instead. Consult factory.

-LS With T-4 DCB tungsten halogen standby lamp.

100W max. Use only with -49, -65, -66.

Relays, Standbys, Lamps

-32 -45 -46 -94 -FR -OG

-49 Extra circuit DCB socket. 100W max. Do not energize simultaneously with main source.

Also see Option-LS. -65 Electronic standby system and DCB socket.

100W max. Provides immediate light until HID restrikes. Also see Options -66 and -LS. -66 Electronic time delay standby system and DCB socket. 100W max. Provides light until HID reaches 70% output. Also see -LS. -LP With lamp. Specify source, wattage, color temperature, and clear or coated. (3700oK standard for metal halide)

Lenses and Trims White oversize trim ring. Specify O.D. Gasket between trim and ceiling.

Gasket between trim and lens.

Custom color trim assembly. Consult factory.

Fresnel tempered lens instead.

Black OptiGroove flare trim instead. (CP x .95)

Other -79 Extension collar for up to 2” thick ceilings.

-99 Special modification. Consult factory.

-TA Top access for servicing VRR-07046 from above.

* Photometric Definitions and Keys shown on page 37. www.kirlinlighting.com

29

Energy Efficient Vandal Resistant & Maximum Security Lighting

VRR-08047 VRR-08048

8”

1 ED17

150 WATT MAXIMUM

8”

1 ED17

175 WATT MAXIMUM

Since 1895

Efficient 8” Pulse Start Metal Halide Reflector • Specular ellipsoidal Alzak® aluminum.

Trim / Lens Assembly • Vandal resistant smooth white seamless tapered aluminum self-flanged trim or see Option -OG. • Flush center pin tamperproof hex screws and captive nuts secure trim to housing.

• Lens: UV absorbing tempered prismatic C#73 above 1/4” clear tempered glass.

• Continuous ring secures lens to trim.

• Tamperproof tool included.

Ballast Assembly: Specify Voltage • WhisperPackTM fully encapsulated 180oC rated HPF pulse start ballast.

• 50-150 watt: Class H, high reactance for 120 volt and Options -65, -66; linear reactor for 277 volt.

• 175 watt: Super CWA for 120 volt and Options -65, -66, -HL; Class H, linear reactor for 277 volt.

• See Option -PR for conventional probe start.

• Capacitor and ignitor supplied.

• Dimming (-39) and electronic (-96) ballasts available. See Options.

• Cool, quiet, long-life. Silicone leads.

Black OptiGroove Option -OG

Specifications Lamp • Designed for pulse start metal halide lamp: VRR-08047: 150W medium base ED17.

VRR-08048: 175W medium base ED17.

• See Option -43 for lower wattages.

Socket • Medium base. Pulse rated.

• Glazed porcelain. Silicone leads.

Performance at a Glance*

For detailed ITL reports see www.kirlinlighting.com, data disk or submittal sheets.

VRR-08047

VRR-08047 (150W Coated Lamp) 90˚

Ceiling Cut-out 9” Dia.

75˚ 1300

161 2" [419mm]

117 8" sq [302mm]

3900 0˚

EEE

VRR-08048

60˚

2600

27" [686mm]

Option -OG Also Shown

EEE

• Visible and easily serviced in all ceilings.

Fuse • Fused primary. Renewable. Aids servicing.

Aluminum Housing • Acrylic enameled. Rustproof: Exceeds 1000 hour ASTM 5% salt spray test.

• Lightweight: Minimizes ceiling load.

• Cool operation: Extends component life.

• Entire luminaire serviced through aperture.

• Built-in plaster frame.

Outlet Box • Prewired 14 GA (NEC) galvanized steel, UL listed. 1/2” and 3/4” knockouts.

Installation • 27” galvanized hanger bars with adjustable mounting brackets (2) supplied.

• Recesses indoor or outdoor in covered locations.

UL, C-UL (Canada) Listings • Wet, damp or dry locations, covered ceilings.

• Through-branch conductors (6 #12 AWG 90°C).

Three Year Limited Warranty • Complete standard fixture and ballast.

Thermal Protection • Per current NEC.

45˚ 15˚

30˚

EFFICIENCY: 55.6% ITL TEST #59146

VRR-08047-43 (100W Coated Lamp) 90˚

Cone of Light* Dist.

FC 6 105.7 8 59.4 10 38.0 12 26.4 14 19.4 16 14.9

Dia. 5.9 7.8 9.8 11.7 13.7 15.6

0° SC 0.9 90° SC 1.1 180° SC 1.0 LER=40.0 AEC=$6.00

75˚ 850

60˚

1700 2550 0˚

45˚ 15˚

30˚

EFFICIENCY: 51.3% ITL TEST #59145

Cone of Light* Dist.

6 8 10 12 14 16

FC 66.9 37.6 24.1 16.7 12.3 9.4

Dia. 5.8 7.7 9.6 11.5 13.4 15.3

0° SC 0.9 90° SC 1.0 180° SC 0.9 LER=36.5 AEC=$6.58

VRR-08048 (175W Clear Lamp) 90˚

161 2" [419mm]

75˚ 2500

Ceiling Cut-out 9” Dia.

60˚

5000 7500 0˚

45˚ 15˚

Cone of Light* Dist.

FC 6 120.3 8 67.7 10 43.3 12 30.1 14 22.1 16 16.9

30˚

Exceptional Energy Efficiency EEE

Dia. 8.8 11.7 14.6 17.5 20.4 23.4

SC = 1.3

EFFICIENCY: 60.3%

Option -OG Also Shown

Options Sources and Ballasts -24 HPS ballast instead. Specify wattage, voltage.

-39 Electronic dimming ballast instead, for pulse start metal halide. Consult factory for wattage and voltage availability.

-96 Regulating electronic MH ballast instead.

Consult factory for availability in 175W. -PR Conventional probe start CWA 175W metal halide ballast instead for VRR-08048.

Specify voltage.

Wattage and Voltage -43 Lower wattage: VRR-08047: 50-125 pulse, 35-100 HPS; VRR-08048: 50-150 pulse, 35-150 HPS. Specify voltage.

-120 120 volt, 60 Hz. ballast.

-277 277 volt, 60 Hz. ballast.

30

www.kirlinlighting.com

EEE

ITL TEST #59133

LER=54.3 AEC=$4.42

-347 347 volt, 60 Hz. ballast. Consult factory for dimming or electronic.

-97 Other voltage ballast instead. Consult factory.

-LS With T-4 DCB tungsten halogen standby lamp.

100W max. Use only with -49, -65, -66.

Relays, Standbys, Lamps

-32 -45 -46 -94 -FR -OG

-49 Extra circuit DCB socket. 100W max. Do not energize simultaneously with main source.

Also see Option -LS. -65 Electronic standby system and DCB socket.

100W max. Provides immediate light until HID restrikes. Also see Options -66 and -LS. -66 Electronic time delay standby system and DCB socket. 100W max. Provides light until HID reaches 70% output. Also see -LS. -HL Hi-Lo wiring modification for VRR-08048. For use with external relay systems. 175 watt.

CWA ballast only. Specify system.

-LP With lamp. Specify source, wattage, color temperature, and clear or coated. (3700oK standard for metal halide)

Lenses and Trims White oversize trim ring. Specify O.D. Gasket between trim and ceiling.

Gasket between trim and lens.

Custom color trim assembly. Consult factory.

Fresnel tempered lens instead.

Black OptiGroove flare trim instead. (CP x .95)

Other -79 Extension collar for up to 2” thick ceilings.

-99 Special modification. Consult factory.

-TA Top access for servicing VRR-08048 from above.

* Photometric Definitions and Keys shown on page 37.

Alzak® is a registered trademark of ALCOA.

Since 1895

10”

1 ED17

150 WATT MAXIMUM

10”

1 ED28

200 WATT MAXIMUM

EEE

Specifications Lamp • Designed for pulse start metal halide lamp: VRR-10049: 150W medium base ED17.

VRR-10050: 200W medium base ED17.

• See Option -43 for lower wattages.

Socket • Pulse rated. Glazed porcelain. Silicone leads.

Reflector • Specular Alzak® aluminum.

Trim / Lens Assembly • Vandal resistant smooth white seamless tapered aluminum self-flanged trim or see Option -OG. • Flush center pin tamperproof hex screws and captive nuts secure trim to housing.

• Lens: UV absorbing tempered prismatic C#73 above 1/4” clear tempered glass.

• Continuous ring secures lens to trim.

• Tamperproof tool included.

Ballast Assembly: Specify Voltage • WhisperPackTM fully encapsulated 180oC rated HPF pulse start ballast.

• 50-150W: Class H, high reactance for 120V and Options -65, -66; linear reactor for 277V.

• 175-200 watt: Super CWA for 120 volt and Options -65, -66, -HL; Class H, linear reactor for 277 volt.

• See Option -PR for conventional probe start.

• Capacitor and ignitor supplied.

• Dimming (-39) and electronic (-96) ballasts available. See Options.

• Cool, quiet, long-life. Silicone leads.

• Visible and easily serviced in all ceilings.

Fuse • Fused primary. Renewable. Aids servicing.

Aluminum Housing • Acrylic enameled. Rustproof: Exceeds 1000 hour ASTM 5% salt spray test.

• Lightweight: Minimizes ceiling load.

• Cool operation: Extends component life.

• Entire luminaire serviced through aperture.

• Built-in plaster frame.

Outlet Box • Prewired 14 GA (NEC) galvanized steel, UL listed. 1/2” and 3/4” knockouts.

Installation • 27” galvanized hanger bars with adjustable mounting brackets (2) supplied.

Performance at a Glance*

Black OptiGroove Option -OG

• Recesses indoor or outdoor in covered locations.

UL, C-UL (Canada) Listings • Wet, damp or dry locations, covered ceilings.

• Through-branch conductors (6 #12 AWG 90°C).

Three Year Limited Warranty • Complete standard fixture and ballast.

Thermal Protection • Per current NEC.

For detailed ITL reports see www.kirlinlighting.com, data disk or submittal sheets.

VRR-10049

VRR-10049 (150W Coated Lamp)

Exceptional Energy Efficiency EEE

90˚ 75˚ 1550 3100

27" [686mm]

Option -OG Also Shown

VRR-10050

Ceiling Cut-out 10½” Dia.

4650 0˚

161 2" [419mm]

60˚

117 8" sq [302mm]

45˚ 15˚

30˚

EFFICIENCY: 58.0% ITL TEST #59136

EEE

Cone of Light* Dist.

FC 6 126.5 8 71.2 10 45.5 12 31.6 14 23.2 16 17.8

Dia. 6.7 8.9 11.1 13.3 15.5 17.7

Energy Efficient Vandal Resistant & Maximum Security Lighting

Efficient Large Aperture Pulse Start MH

VRR-10049 VRR-10050

0° SC 1.0 90° SC 1.2 180° SC 1.0 LER=41.8 AEC=$5.75

VRR-10050 (200W Clear Lamp) 90˚

161 2" [419mm]

75˚ 3500

60˚

7000 10500 0˚

45˚ 15˚

30˚

Cone of Light* Dist.

FC 6 281.9 8 158.6 10 101.5 12 70.5 14 51.8 16 39.6

Dia. 6.2 8.2 10.3 12.4 14.4 16.5

SC = 1.0

EFFICIENCY: 61.7%

Options Sources and Ballasts -24 HPS ballast instead. Specify wattage and voltage.

-39 Electronic dimming ballast instead, for pulse start metal halide. Consult factory for wattage and voltage availability.

-96 Regulating electronic MH ballast instead.

Consult for availability in 175W or above.

-PR Conventional probe start CWA 175W metal halide ballast instead for VRR-10050.

Specify voltage.

Wattage and Voltage -43 Lower wattage: VRR-10049: 50-125 pulse, 35-100 HPS; VRR-10050: 150-175 pulse, 175 probe, 150 HPS. Specify voltage.

-120 120 volt, 60 Hz. ballast.

Alzak® is a registered trademark of ALCOA.

ITL TEST #59135

EEE

Option -OG Also Shown -277 277 volt, 60 Hz. ballast.

-347 347 volt, 60 Hz. ballast. Consult factory for dimming or electronic.

-97 Other voltage ballast instead. Consult factory.

Relays, Standbys, Lamps -49 Extra circuit DCB socket. 100W max. Do not energize simultaneously with main source.

Also see Option -LS. -65 Electronic standby system and DCB socket.

100W max. Provides immediate light until HID restrikes. Also see Options -66 and -LS. -66 Electronic time delay standby system and DCB socket. 100W max. Provides light until HID reaches 70% output. Also see -LS. -HL Hi-Lo wiring modification for VRR-10050. For use with external relay systems. 175 watt or above. CWA ballast only. Specify system.

-LP With lamp. Specify source, wattage, color temp, clear or coated. (3700oK std for MH)

LER=58.3 AEC=$4.12

-LS With T-4 DCB tungsten halogen standby lamp.

Use only with -49, -65, -66.

Lenses and Trims -32 -45 -46 -94 -FR -OG

White oversize trim ring. Specify O.D. Gasket between trim and ceiling.

Gasket between trim and lens.

Custom color trim assembly. Consult factory.

Fresnel tempered lens instead for VRR-10049.

Black OptiGroove flare trim instead. (CP x .95)

Other -79 Extension collar for up to 2” thick ceilings.

-99 Special modification. Consult factory.

-TA Top access for servicing VRR-10050 from above.

* Photometric Definitions and Keys shown on page 37. www.kirlinlighting.com

31

Energy Efficient Vandal Resistant & Maximum Security Lighting

VRR-12051

12”

1 ED28

Since 1895

250 WATT MAXIMUM

250W Pulse Start MH for High Ceilings Specifications

Black OptiGroove Option -OG

Exceptional Energy Efficiency EEE

Lamp • Designed for pulse start metal halide lamp: 250W mogul base ED28.

• See Option -43 for lower wattages.

Socket • Horizontal. Pulse rated.

• Glazed porcelain. Silicone leads.

Reflector • Specular Alzak® aluminum.

Trim / Lens Assembly • Vandal resistant smooth white seamless tapered aluminum self-flanged trim or see Option -OG. • Flush center pin tamperproof hex screws and captive nuts secure trim to housing.

• Lens: UV absorbing tempered prismatic C#73 above 1/4” clear tempered glass.

• Continuous ring secures lens to trim.

• Tamperproof tool included.

Ballast Assembly: Specify Voltage • WhisperPackTM fully encapsulated 180oC rated HPF pulse start ballast.

• Super CWA for 120 volt and Options -65, -66, -HL; Class H, linear reactor for 277 volt.

• See Option -PR for conventional probe start.

• Capacitor and ignitor supplied.

Performance at a Glance*

• Dimming (-39) and electronic (-96) ballasts available. See Options.

• Cool, quiet, long-life. Silicone leads.

• Visible and easily serviced in all ceilings.

Fuse • Fused primary. Renewable. Aids servicing.

Aluminum Housing • Acrylic enameled. Rustproof: Exceeds 1000 hour ASTM 5% salt spray test.

• Lightweight: Minimizes ceiling load.

• Cool operation: Extends component life.

• Entire luminaire serviced through aperture.

• Built-in plaster frame.

Outlet Box • Prewired 14 GA (NEC) galvanized steel, UL listed.

1/2” and 3/4” knockouts.

Installation • 27” galvanized hanger bars with adjustable mounting brackets (2) supplied.

• Recesses indoor or outdoor in covered locations.

UL, C-UL (Canada) Listings • Wet, damp or dry locations, covered ceilings.

• Through-branch conductors (6 #12 AWG 90°C).

Three Year Limited Warranty • Complete standard fixture and ballast.

Thermal Protection • Per current NEC.

For detailed ITL reports see www.kirlinlighting.com, data disk or submittal sheets.

VRR-12051 VRR-12051 (250 Watt Coated Lamp) 90˚ 75˚ 3000

60˚

6000 9000 0˚

EEE

Option -OG Also Shown

Options† Sources and Ballasts -24 HPS ballast instead. Specify wattage and voltage.

-39 Electronic dimming ballast instead, for pulse start metal halide. Consult factory for wattage and voltage availability.

-96 Regulating electronic MH ballast instead.

Consult for availability in 175W or above.

-PR Conventional probe start CWA 250W metal halide ballast instead. Specify voltage.

Wattage and Voltage -43 Lower wattage: 150 pulse, 175 probe, 150 HPS. Specify voltage.

-120 120 volt, 60 Hz. ballast.

-277 277 volt, 60 Hz. ballast.

45˚ 15˚

30˚

EFFICIENCY: 54.6% ITL TEST #59132

Cone of Light* Dist.

FC 6 214.6 8 120.7 10 77.3 12 53.7 14 39.4 16 30.2

Dia. 6.5 8.7 10.8 13.0 15.1 17.3

0° SC 1.0 90° SC 1.1 180° SC 1.0 LER=42.1 AEC=$5.71

Ceiling Cut-out 12¼” Dia.

-347 347 volt, 60 Hz. ballast. Consult factory for dimming or electronic.

-97 Other voltage ballast instead. Consult factory.

Relays, Standbys, Lamps -49 Extra circuit DCB socket. 150W max. Do not energize simultaneously with main source.

Also see Option -LS. -65 Electronic standby system and DCB socket.

150W max. Provides immediate light until HID restrikes. Also see Options -66 and -LS. -66 Electronic time delay standby system and DCB socket. 150W max. Provides light until HID reaches 70% output. Also see -LS. -HL Hi-Lo wiring modification. For use with external relay systems. 175 watt or above.

CWA ballast only. Specify system.

-LP With lamp. Specify source, wattage, color temp, clear or coated. (3700oK std for MH)

-LS With T-4 DCB tungsten halogen standby lamp.

150W max. Use only with -49, -65, -66.

Lenses and Trims -32 -45 -46 -94 -OG

White oversize trim ring. Specify O.D. Gasket between trim and ceiling.

Gasket between trim and lens.

Custom color trim assembly. Consult factory.

Black OptiGroove flare trim instead. (CP x .95)

Other -79 Extension collar for up to 2” thick ceilings.

-99 Special modification. Consult factory.

-TA Top access for servicing from above.

* Photometric Definitions and Keys shown on page 37.

32

www.kirlinlighting.com

Alzak® is a registered trademark of ALCOA.

Since 1895

10”

1 ED17

VRR-10052

150 WATT MAXIMUM

Specifications Lamp • Designed for pulse start metal halide lamp: 150W medium base ED17.

• See Option -43 for lower wattages.

Socket • Horizontal. Medium base. Pulse rated.

• Glazed porcelain. Silicone leads.

Reflector • Specular Alzak® aluminum.

Trim / Lens Assembly • Vandal resistant smooth white seamless tapered aluminum self-flanged trim or see Option -OG. • Flush center pin tamperproof hex screws and captive nuts secure trim to housing.

• Lens: UV absorbing tempered prismatic C#73 above 1/4” clear tempered glass.

• Continuous ring secures lens to trim.

• Tamperproof tool included.

Ballast Assembly: Specify Voltage • WhisperPackTM fully encapsulated 180oC rated HPF pulse start ballast.

• Class H, high reactance for 120 volt and Options -65, -66; linear reactor for 277 volt.

• Capacitor and ignitor supplied.

• Dimming (-39) and electronic (-96) ballasts

Performance at a Glance*

available. See Options.

• Cool, quiet, long-life. Silicone leads.

• Visible and easily serviced in all ceilings.

Fuse • Fused primary. Renewable. Aids servicing.

Concrete Pour Housing • 16 GA. galvannealed steel with black enamel finish.

• Fully gasketed.

• Entire luminaire serviced through removable trim assembly.

• 2” bottom flange promotes concrete flow.

Outlet Box • Prewired 14 GA (NEC) galvanized steel, UL listed.

1/2” and 3/4” knockouts.

Installation • Recesses indoor or outdoor in poured concrete ceilings.

UL, C-UL (Canada) Listings • For use in poured concrete.

• Through-branch conductors (6 #12 AWG 90°C).

Three Year Limited Warranty • Complete standard fixture and ballast.

Thermal Protection • Per current NEC.

Black OptiGroove Option -OG

Exceptional Energy Efficiency EEE

For detailed ITL reports see www.kirlinlighting.com, data disk or submittal sheets.

Energy Efficient Vandal Resistant & Maximum Security Lighting

10” Concrete Pour Pulse Start Metal Halide

VRR-10052 VRR-10052 (150 Watt Coated Lamp) 90˚ 75˚ 1550

60˚

3100 4650 0˚

EEE

45˚ 15˚

30˚

EFFICIENCY: 58.0% ITL TEST #59136

Cone of Light* Dist.

FC 6 126.5 8 71.2 10 45.5 12 31.6 14 23.2 16 17.8

Dia. 6.7 8.9 11.1 13.3 15.5 17.7

0° SC 1.0 90° SC 1.2 180° SC 1.0 LER=41.8 AEC=$5.75

Option -OG Also Shown

Options Sources and Ballasts

Relays, Standbys, Lamps

Lenses and Trims

-24 HPS ballast instead. 150W. Specify wattage and voltage.

-39 Electronic dimming ballast instead, for pulse start metal halide. Consult factory for wattage and voltage availability.

-96 Regulating electronic MH ballast instead.

-49 Extra circuit DCB socket. 100W max. Do not energize in unison with main source. Also see Option -LS. -65 Electronic standby system and DCB socket.

100W max. Provides immediate light until HID restrikes. Also see Options -66 and -LS. -66 Electronic time delay standby system and DCB socket. 100W max. Provides light until HID reaches 70% output. Also see -LS. -LP With lamp. Specify source, wattage, color temperature, and clear or coated. (3700oK standard for metal halide) -LS With T-4 DCB tungsten halogen standby lamp. 100W max. Use only with -49, -65, -66.

-32 -45 -46 -94 -FR -OG

Wattage and Voltage -43 Lower wattage: 50-125 pulse, 35-100 HPS. Specify voltage.

-120 120 volt, 60 Hz. ballast.

-277 277 volt, 60 Hz. ballast.

-347 347 volt, 60 Hz. ballast. Consult factory for dimming or electronic.

-97 Other voltage ballast instead. Consult factory.

White oversize trim ring. Specify O.D. Gasket between trim and ceiling.

Gasket between trim and lens.

Custom color trim assembly. Consult factory.

Fresnel tempered lens instead.

Black OptiGroove flare trim instead. (CP x .95)

Other -99 Special modification. Consult factory.

* Photometric Definitions and Keys are shown on page 37.

Alzak® is a registered trademark of ALCOA.

www.kirlinlighting.com

33

Energy Efficient Vandal Resistant & Maximum Security Lighting

VRS-12053 VSS-12054

1’ x 1’

1 ED17 100 WATT MAXIMUM

1’ x 1’

1 ED17 100 WATT MAXIMUM

Since 1895

Efficient Pulse Start Metal Halide Squares Fuse • Fused primary. Renewable. Aids servicing.

Aluminum Housing • Extra strong 6063-T6 tempered extruded aluminum. White polyester enamel finish.

• Rustproof: Exceeds 1000 hour ASTM 5% salt spray test.

• Cool operation: Extends component life.

Outlet Box - VRS-12053 • Prewired 14 GA (NEC) galvanized steel, UL listed.

1/2” and 3/4” knockouts.

Installation - VRS-12053 • Two die-formed 7/8” vertically adjustable 16 gauge steel mounting yokes supplied.

• Recesses indoor or outdoor in covered locations.

• Concrete Pour version available. See Option -78.

Installation - VSS-12054 • Secure with 3/8” lag or molly bolts to ceiling support structure. 7/8” diameter access hole with four 1/2” diameter mounting holes.

• Installs indoor or outdoor in covered locations.

UL, C-UL (Canada) Listings • Wet, damp or dry locations, covered ceilings.

• VRS-12053: Through-branch conductors (6 #12 AWG 90°C).

Three Year Limited Warranty • Complete standard fixture and ballast.

Thermal Protection - Recessed Only • Per current NEC.

Specifications

Maximum Security Exceptional Energy Efficiency EEE

Lamp • Designed for pulse start metal halide lamp: 100W medium base ED17.

• See Option -43 for lower wattages.

Socket • Horizontal. Medium base. Pulse rated.

• Glazed porcelain. Silicone leads.

Reflector • Kirlin exclusive GlasSurfaced™ faceted specular aluminum.

Trim / Lens Assembly • Injection molded prismatic polycarbonate drop bisymmetric distribution lens. UV stabilized.

• Continuous extruded 6063-T6 tempered aluminum, non-removable lens clamps; four flush mounted center pin tamperproof screws with captive nuts.

• Tamperproof tool included.

Ballast Assembly: Specify Voltage • Core and coil 180oC rated HPF pulse start ballast.

• Class H, high reactance for 120 volt and Options -65, -66; linear reactor for 277 volt.

• Capacitor and ignitor supplied.

• Cool, quiet, long-life. Silicone leads.

• Visible and easily serviced in all ceilings (recessed only).

Performance at a Glance* VRS-12053

For detailed ITL reports see www.kirlinlighting.com, data disk or submittal sheets.

Ceiling Cut-out 13” x 15½” VRS-12053 (Coated Lamp) VSS-12054 (Coated Lamp) 0

90˚ 75˚

650

60˚

1300

VSS-12054

1950 0˚

45˚

15˚

BILATERAL SYMMETRY

30˚

EFFICIENCY: 57.8%

EEE

0° SC 1.3 90° SC 2.5 180° SC 1.3 ITL TEST #43980 LER=34.1 AEC=$7.05

Options Sources and Ballasts -24 HPS ballast instead. 100W. Specify voltage.

Wattage and Voltage -43 Lower wattage: 50-70 pulse, 35-70 HPS. Specify voltage.

-120 120 volt, 60 Hz. ballast.

-277 277 volt, 60 Hz. ballast.

-347 347 volt, 60 Hz. ballast.

-97 Other voltage ballast instead. Consult factory.

Relays, Standbys, Lamps -49 Extra circuit DCB socket. 100W max. Do not energize simultaneously with main source.

Also see Option -LS.

34

www.kirlinlighting.com

-65 Electronic standby system and DCB socket.

100W max. Provides immediate light until HID restrikes. Also see Options -66 and -LS. -66 Electronic time delay standby system and DCB socket. 100W max. Provides light until HID reaches 70% output. Also see -LS. -LP With lamp. Specify source, wattage, color temperature, and clear or coated. (3700oK standard for metal halide) -LS With T-4 DCB tungsten halogen standby lamp. 100W max. Use only with -49, -65, -66.

Lenses and Trims -15 Tempered prismatic C#73 lens instead.

-32 White oversize trim extender. Specify size.

-45 Gasket between trim and ceiling.

(VRS-12053 only).

-94 Custom color trim assembly. Consult factory.

Luminaire (Housing) Finishes -35 -36 -37 -38 -94

Natural aluminum acrylic enamel.

Gold acrylic enamel.

Dark Bronze acrylic enamel.

Black acrylic enamel.

Custom color/finish. Specify. Consult factory.

Other -78 Concrete pour box assembly for use in wet concrete for VRS-12053 only. Following pour, fixture mounts within assembly.

-99 Special modification. Consult factory.

* Photometric Definitions and Keys are shown on page 37.

Since 1895

8”

1

PAR 38

250 WATT MAXIMUM

7”

1

A21

150 WATT MAXIMUM

VRR-08055 VRR-07056

Specifications Lamp/Socket • Designed for one tungsten halogen or incandescent lamp: VRR-08055: 250W PAR 38.

VRR-07056: 150W frosted horizontal A21.

• Dimmable (controls by others).

• Glazed porcelain medium base socket.

Reflector • Specular Alzak® aluminum.

Trim / Lens Assembly • Vandal resistant smooth white seamless tapered aluminum self-flanged trim or see Option -OG. • Flush center pin tamperproof hex screws and captive nuts secure trim to housing.

• VRR-08055: Tempered microprismatic glass above 1/4” clear tempered glass.

• VRR-07056: Tempered prismatic C#73 above 1/4” clear tempered glass.

• Continuous ring secures lens to trim.

• Tamperproof tool included.

Aluminum Housing • Acrylic enameled. Rustproof: Exceeds 1000 hour ASTM 5% salt spray test.

• Lightweight: Minimizes ceiling load.

• Cool operation: Extends component life.

• Entire luminaire serviced through aperture.

• Built-in plaster frame.

Outlet Box and Thermal Protection • Prewired 14 GA (NEC) galvanized steel, UL listed.

1/2” and 3/4” knockouts.

• Thermal protector (per current NEC) provides automatic cut-off if rated temperature is exceeded.

Installation • 27” galvanized hanger bars with adjustable mounting brackets (2) supplied.

• Recesses indoor or outdoor in covered locations.

UL, C-UL (Canada) Listings • Wet, damp or dry locations, covered ceilings.

• Through-branch conductors (6 #12 AWG 90°C).

Three Year Limited Warranty • Complete standard fixture.

Performance at a Glance*

Black OptiGroove Option -OG

Exceptional Energy Efficiency EEE

For detailed ITL reports see www.kirlinlighting.com, data disk or submittal sheets.

VRR-08055

VRR-08055-15 (250W Flood)

VRR-08055 (250W Flood) 90˚ 75˚

Ceiling Cut-out 9” Dia.

3000

60˚

6000 9000 0˚

45˚ 15˚

Dist.

FC 6 239.4 8 134.7 10 86.2 12 59.8 14 44.0 16 33.7

30˚

Dia. 2.6 3.5 4.4 5.3 6.1 7.0

SC = 0.4

75˚ 1000

60˚

2000 3000 0˚

45˚ 15˚

Cone of Light* Dist.

6 8 10 12 14 16

30˚

FC 78.7 44.3 28.3 19.7 14.5 11.1

Dia. 5.0 6.7 8.3 10.0 11.7 13.3

SC = 0.8

EFFICIENCY: 70.4%

EFFICIENCY: 77.8%

EEE

90˚

Cone of Light*

Energy Efficient Vandal Resistant & Maximum Security Lighting

Small Aperture PAR 38 and Incandescent

ITL TEST #58942 LER=11.23 AEC=$21.42

ITL TEST #58987

LER=10.1 AEC=$23.67

Option -OG Also Shown VRR-07056 (150 Watt)

VRR-07056

90˚ 75˚ 350

60˚

700

Ceiling Cut-out 8” Dia.

Option -OG Also Shown

1050 0˚

45˚

VRR-07056 (100 Watt)

Dist.

6 8 10 12 14 16

FC 22.8 12.8 8.2 5.7 4.2 3.2

Dia. 7.2 9.6 12.0 14.4 16.8 19.2

0° SC 1.3 90° SC 1.2 180° SC 0.9 EFFICIENCY: 48.0% ITL TEST #59127 LER=9.1 AEC=$26.32

15˚

90˚

Cone of Light*

30˚

75˚ 200

60˚

400 600 0˚

45˚ 15˚

30˚

EFFICIENCY: 48.3% ITL TEST #59126

Cone of Light* Dist.

6 8 10 12 14 16

FC 14.6 8.2 5.3 3.6 2.7 2.1

Dia. 7.1 9.5 11.9 14.2 16.6 19.0

0° SC 1.1 90° SC 1.2 180° SC 1.2 LER=8.5 AEC=$28.39

Options Voltage

Lenses and Trims

Other

-58 277/120V stepdown transformer for 277 volt line input, prewired into fixture.

-15 Tempered prismatic C#73 lens instead above 1/4” clear tempered glass (VRR-08055 only).

-32 White oversize trim ring. Specify O.D. -45 Gasket between ceiling and trim flange.

-46 Gasket between trim and lens.

-94 Custom color/finish. Specify. Consult factory.

-FR Fresnel tempered lens instead for VRR-07056.

-OG Black OptiGroove flare trim instead. (CP x .95)

-79 Extension collar for ceilings up to 2” thick.

-99 Special modification. Consult factory.

-TA Top access for servicing VRR-08055 from above.

* Photometric Definitions and Keys are shown on page 37.

Alzak® is a registered trademark of ALCOA.

www.kirlinlighting.com

35

Energy Efficient Vandal Resistant & Maximum Security Lighting

VRR-08057 VRR-10058

8”

1 A21

150 WATT MAXIMUM

10”

1 A23

200 WATT MAXIMUM

Since 1895

Incandescent with Higher Lumen Output Specifications

Black OptiGroove Option -OG

Exceptional Energy Efficiency EEE

Lamp/Socket • Designed for one horizontal incandescent lamp: VRR-08057: 150W frosted A21.

VRR-10058: 200W frosted A23.

• Dimmable (controls by others).

• Glazed porcelain medium base socket.

Reflector • Specular Alzak® aluminum.

Trim / Lens Assembly • Vandal resistant smooth white seamless tapered aluminum self-flanged trim or see Option -OG. • Flush center pin tamperproof hex screws and captive nuts secure trim to housing.

• Lens: Tempered prismatic C#73 above 1/4” clear tempered glass.

• Continuous ring secures lens to trim.

• Tamperproof tool included.

Aluminum Housing • Acrylic enameled. Rustproof: Exceeds 1000 hour ASTM 5% salt spray test.

Performance at a Glance*

• Lightweight: Minimizes ceiling load.

• Cool operation: Extends component life.

• Entire luminaire serviced through aperture.

• Built-in plaster frame.

Outlet Box and Thermal Protection • Prewired 14 GA (NEC) galvanized steel, UL listed.

1/2” and 3/4” knockouts.

• Thermal protector (per current NEC) provides automatic cut-off if rated temperature is exceeded.

Installation • 27” galvanized hanger bars with adjustable mounting brackets (2) supplied.

• Recesses indoor or outdoor in covered locations.

UL, C-UL (Canada) Listings • Wet, damp or dry locations, covered ceilings.

• Through-branch conductors (6 #12 AWG 90°C).

Three Year Limited Warranty • Complete standard fixture.

For detailed ITL reports see www.kirlinlighting.com, data disk or submittal sheets.

VRR-08057

VRR-08057 (150 Watt) 90˚

Ceiling Cut-out 9” Dia.

75˚ 400 800

60˚ 45˚

1200 0˚

Option -OG Also Shown

EEE

Cone of Light* Dist.

6 8 10 12 14 16

FC 30.4 17.1 11.0 7.6 5.6 4.3

Dia. 6.4 8.6 10.7 12.9 15.0 17.2

0° SC 1.1 15˚ 30˚ 90° SC 1.1 180° SC 0.9 EFFICIENCY: 55.2% ITL TEST #59123 LER=10.5 AEC=$22.88

VRR-10058

VRR-10058 (150 Watt)

VRR-10058 (200 Watt) 90˚ 75˚ 400 800

Ceiling Cut-out 10½” Dia. Option -OG Also Shown

1200 0˚

EEE

60˚ 45˚

90˚

Cone of Light* Dist.

6 8 10 12 14 16

FC 32.4 18.2 11.7 8.1 5.9 4.6

Dia. 8.0 10.6 13.3 16.0 18.6 21.3

0° SC 0.9 15˚ 30˚ 90° SC 1.4 180° SC 1.4 EFFICIENCY: 56.6% ITL TEST #59189 LER=11.3 AEC=$12.15

75˚ 350 700 1050 0˚

60˚ 45˚

Cone of Light* Dist.

6 8 10 12 14 16

FC 25.8 14.5 9.3 6.4 4.7 3.6

Dia. 8.0 10.7 13.4 16.1 18.7 21.4

0° SC 1.4 15˚ 30˚ 90° SC 1.4 180° SC 1.0 EFFICIENCY: 66.3% ITL TEST #59125 LER=12.6 AEC=$19.05

Options Voltage

Lenses and Trims

Other

-58 277/120V stepdown transformer for 277 volt line input, prewired into fixture.

-32 -45 -46 -94 -FR -OG

-79 Extension collar for ceilings up to 2” thick.

-99 Special modification. Consult factory.

White oversize trim ring. Specify O.D. Gasket between ceiling and trim flange.

Gasket between trim and lens.

Custom color/finish. Specify. Consult factory.

Fresnel tempered lens instead for VRR-10058.

Black OptiGroove flare trim instead. (CP x .95)

* Photometric Definitions and Keys are shown on page 37.

36

www.kirlinlighting.com

Alzak® is a registered trademark of ALCOA.

HALLMARKS OF KIRLIN QUALITY / DEFINITIONS

Since 1895

For over a century, Kirlin has maintained a consistent philosophy and focus in every aspect of our business that has translated into these outstanding hallmarks of quality: • REFLECTION POINT SHOWROOM AND WWW.KIRLINLIGHTING.COM: Our lighting education center and web site offer excellent “in-person” and “on-line” opportunities to extend your knowledge of lighting and all that Kirlin offers.

• QUICK SHIP PROGRAM: Select products ship within 5 business days. Catalog products ship within 3-5 weeks!

• OPTIMIZED OPTICS: Kirlin optical systems are designed to maximize performance and efficiency for each specific lamp and application.

• SELF-FLANGED REFLECTORS: One piece 100% aluminum, with no plastic trim rings to warp, discolor or misplace.

90˚ 75˚ 500

60˚

1000 1500 0˚

45˚ 15˚

30˚

• OPTIONS, OPTIONS AND MORE OPTIONS: Just look inside this catalog. No one in the industry offers a wider array of options than Kirlin.

• U.L. LISTED: Wet, damp or dry locations in covered ceilings.

• ACCURATE PHOTOMETRY: All Kirlin products are independently tested using a complete luminaire, as installed, eliminating the “unexpected” that occurs with “in-house” data or photometry measured with optical components only.

• COOLER OPERATION: Aluminum construction throughout provides maximum heat dissipation/cooling, which improves performance and extends component life.

• SUPER QUIET WHISPERPACK™ BALLASTS: HID WhisperPack™ is the industry’s premium sound and heat reduction technology and is only available from Kirlin.

• THREE YEAR WARRANTY: Best in the industry and includes the ballast.

• ALL ALUMINUM HOUSINGS: Rustproof enameled aluminum maximizes heat dissipation, resists corrosion unlike steel housings and lightens ceiling loads

• EASY SERVICING: Even when installed in inaccessible ceilings, all Kirlin products are easily accessed and serviced through the housing aperture.

• SHALLOW PLENUM DESIGN: Through an efficient design that dissipates heat and positions the lamp horizontally, Kirlin’s shallow fixture housing (up to 70% shallower than competitive models) is the solution for shallow plenum areas.

= Type IC

EEE

• FUSES & MOUNTING HARDWARE INCLUDED: No hidden or extra material or installation costs.

• TOP ACCESS AVAILABLE: Most recessed products can be accessed and serviced from above by adding Option “-TA”.

= Exceptionally Energy Efficient

= Premier Product

PHOTOMETRIC DEFINITIONS AND KEYS Cone of Light Key Distance from fixture Footcandles at nadir (0°) Circle of light at 50% of FC

* Dia. (in ft.) shown is where FC value is half the FC at nadir.

LER (Luminaire Efficiency Rating) LER = Luminaire Efficiency x Total Lamp Lumens x Ballast Factor* Input Watts

AEC (Annual Energy Cost)

EEE

AEC = Annual Energy Cost per 1000 lumens (based on 3000 hours use @ $0.08 KWH)

= Air Tight Optional Cone of Light *

Sample: Ft. FC Dia.

Energy Efficient Vandal Resistant & Maximum Security Lighting

HALLMARKS OF KIRLIN QUALITY

EPACT COMPLIANT

*Ballast factors typically range between 0.85 and 1.00. All LER data assumes 0.90 ballast factor.

Dist.

FC

Dia.

6 8 10 12 14 16

38.6 21.7 13.9 9.7 7.1 5.4

8.1 10.8 13.5 16.1 18.8 21.5

In furtherance of Kirlin’s mission to promote and provide high efficiency lighting, we have included these formulas and the LER and AEC values on product pages as part of a voluntary program developed by NEMA and Fixture Manufacturers to satisfy the basic requirements of the Federal Energy Policy Act (EPACT) which became effective October 1, 1995.

All manufacturers of luminaires should be distributing this information so that owners, designers and specifiers can assess the relative energy efficiency and operating cost of their products.

www.kirlinlighting.com

37

Detroit People Mover - Detroit, Michigan Lighting Design: Berbiglia Associates, Inc. Architecture: Skidmore, Ownings & Merrill, LLP Lighting by Kirlin: HSS-13187

Over 30 years expertise in this marketplace providing superior lighting solutions to: •San Quentin Prison •Mayo Clinic Psychiatric Facility •Cook County Jail •Virginia Psychiatric Hospital •Broward County Jail •The Detroit Zoo

P.O. Box 3300 Detroit, MI 48232-3000 3401 East Jefferson Ave. Detroit, MI 48207-4232 Phone: 313-259-6400 • FAX: 313-259-3121 info@kirlinlighting.com • www.kirlinlighting.com

EPACT Designed, Manufactured and Assembled in the U.S.A.

COMPLIANT

North American (U.S. and Canada) network of manufacturer representatives to serve you. National and international distribution. Kirlin Engineering Specification sheets are available for each fixture in this catalog at www.kirlinlighting.com or from our manufacturer representatives. Due to our continuing effort to improve product, technical information is subject to change without notice.