ACT March 2026

AMERICAN CRANES & TRANSPORT

August 2019 March 2026 Volume 15 n Issue 8

The magazine for the crane, lifting and transport industry www.craneandtransportbriefing.com A KHL Group Publication

INTERVIEW

Liebherr’s Simon Schuster p16

PERSPECTIVE

Tariffs: a corrective response? p15

TOP LIST

p37

Official domestic magazine of the SC&RA

The big show!

2026 show guide issue p42

VIBRATORY DAMPENERSPROTECT YOUR CRANE Full range of models from 5,000 lbs. capacity up to 180,000 lbs  95% vibration reduction  Load cells don’t have to be removed for use with vibratory hammer  Eliminates wear and tear on hydraulic boom cylinders  Suitable for use with any hydraulic boom/crawler crane and any make/model vibratory hammer

 757-485-2500  sales@geoquipusa.com

www.geoquipusa.com/tunkers-vibratory-dampeners advert full page.indd 2

18/01/2021 16:50:26

WHO’S WHO AT KHL

EDITOR’S LETTER Editorial Editor D.Ann Slayton Shiffler d.ann.shiffler@khl.com | 512 868 7482

Deputy editor Hannah Sundermeyer hannah.sundermeyer@khl.com | 913 259 8060

International editor Alex Dahm | alex.dahm@khl.com SC&RA correspondent Mike Chalmers Director of content Murray Pollok

Media Production Client success & delivery manager Charlotte Kemp | charlotte.kemp@khl.com Client success & delivery team Ben Fisher | ben.fisher@khl.com Olivia Radcliffe | olivia.radcliffe@khl.com Alex Thomson | alex.thomson@khl.com Group designer Jade Hudson

Circulation

Audience development manager Anna Philo | anna.philo@khl.com

Events

Events manager Steve Webb Events design manager Gary Brinklow Creative designer Kate Brown

Sales National sales manager Michael Sharkey michael.sharkey@khl.com | 515 269 0258

National account manager Bev O’dell bev.odell@khl.com | 816 886 1858

Vice president global sales Alister Williams alister.williams@khl.com | 843 637 4127

Client success & digital director Peter Watkinson peter.watkinson@khl.com

Chief financial officer Paul Baker

Lucky number 7

A

s the month of March dawns, I will be on my way to Las Vegas for my seventh ConExpo Con/Agg. I attended my first ConExpo in 2005, the spring before KHL Group, (in partnership with SC&RA), launched American Cranes & Transport. At that show, I met the KHL team and started contemplating taking on the editor role. Now, almost 21 years later, I’m anticipating another crazy few days in ‘Vegas meeting the masses and looking at cranes, trailers and other equipment and technologies.

It actually should be my eighth time to go to ConExpo, but I sat out 2020. That turned out to be a good year to miss due to all the drama caused by the Covid-19 pandemic. While the show closed early, that didn’t phase the news cycle in terms of new products.

That’s the most exciting part about ConExpo, covering all the new stuff.

Last month we broke the news of three ConExpo exclusives, and we look forward to the April issue when we will write a huge review of all the new cranes, trailers, rigging gear and related services that were launched at the show. Hannah Sundermeyer and I will be racking up the steps all week, taking photos and getting all the details.

Our ConExpo Show Guide, in this issue, is for those who attend ConExpo and for those who don’t. This comprehensive show guide features a list of the select exhibitors pertinent to our readership, as well as a preview of everything we could gather before the show. Some 44 companies contributed to this year’s massive show guide.

The March issue is chock full of editorial – ranging from our ACTSPECIALIZEDLIFTING&RIGGING50 toplist to our roundup of the latest rigging gear. Tonya Fry discusses private party equipment sales in our Business and Finance column, and W.O. Grubb’s Chuck Cooke explains situational awareness in our Risk Management column. Also don’t miss our Site Report that chronicles a Budrovich steeple project and our Industry Spotlight on pilot cars. And there’s an article by someone who we haven’t covered in a good while. Frank Bardonaro offers an interesting viewpoint on tariffs in our Perspective article.

And finally, come see us at ConExpo. Our KHL outdoor booth is a thing of the past, but you can find us inside the North Hall at booth 12525.

And finally, let me know what’s going on with your machines, people and jobs.

KHL CRANE & TRANSPORT PORTFOLIO AMERICAN CRANES & TRANSPORT

August 2019 March 2026 Volume 15 n Issue 8

The magazine for the crane, lifting and transport industry www.craneandtransportbriefing.com A KHL Group Publication

www.craneandtransportbriefing.com

INTERVIEW

Liebherr’s Simon Schuster

p16

PERSPECTIVE

Tariffs: a corrective response?

p15

TOP LIST

Specialized Transport Manufacturers’ Directory 2025 Events Diary Top Lists

p37

Official domestic magazine of the SC&RA

The big show!

2026 show guide issue

p42

Official domestic magazine of the SC&RA

INTERNATIONAL

www.craneandtransportbriefing.com JANUARY-FEBRUARY 2026 | KHL Group publication

INDUSTRIAL LIFTING

Busy bees

ROPE TECHNOLOGY

The crucial elements SHOW GUIDE

REPAIR AND REFURBISHMENT

Service and sustainability REVIEW: EXCON ■ NORTH AMERICAN MARKET: IN BUSINESS

Published by KHL Group OFFICIAL MAGAZINE

,IFTING¬ -OVINGTHE¬7ORLD #ELEBRATING¬THE¬ THANNIVERSARY¬OF¬THE3PECIALIZED¬#ARRIERS¬ 2IGGING¬!SSOCIATION

ACT100 ACTTRANSPORT50 ACTSPECIALIZEDLIFTING50 ACTTOWERCRANE50

www.craneandtransportbriefing.com

www.worldcraneweek.com AMERICAN CRANES & TRANSPORT

August 2019 March 2026 Volume 15 n Issue 8

The magazine for the crane, lifting and transport industry www.craneandtransportbriefing.com A KHL Group Publication

INTERVIEW

Liebherr’s Simon Schuster p16

PERSPECTIVE

Tariffs: a corrective response?

Chief executive officer James King

KHL GROUP AMERICAS LLC 14269 N 87th Street, Suite. 205, Scottsdale, AZ 85260, USA 480 779 9969 americas@khl.com

www.craneandtransportbriefing.com

p15

TOP LIST

p37

D.ANN SLAYTON SHIFFLER Editor

KHL Group Americas, 30325 Oak Tree Drive, Georgetown TX 78628 +1 512-868-7482 | d.ann.shiffler@khl.com SUBSCRIPTIONS: Annual subscription rate is $301. Free subscriptions are given on a controlled circulation basis to readers who fully complete a Reader Subscription Form and qualify under our terms of control. The publisher reserves the right to refuse subscription to non-qualified readers. To register for your copy head to www.khl.com/free-subscription

A KHL Group Publication

North American Crane Guide Manufacturers’ and Services Directory

Official domestic magazine of the SC&RA

The big show!

2026 show guide issue p42

Follow American Cranes & Specialized Transport on issuu and enjoy every issue on your phone or tablet, anytime

Scan the QR code to find us on LinkedIn: Crane and Transport Briefing

MARCH 2026 ACT

3

SETTING THE BENCHMARK IN THE ROUGH TERRAIN CRANE CATEGORY. 120 USt| 110 mt Rough Terrain Crane ✓ 38.3’ - 164.1’ six-section pin & latch boom ✓ 261.7’ max tip height

OPTIONAL SMARTFLY: ✓ 35’ - 58’ of stowable fly ✓ SmartFly features ✓ One-person operation ✓ Assembly controls accessed from the ground ✓ Designed to minimize ladder climbs

Re T H I N K FUEL HVO

Contact your local dealer for more information.

Find us on:

Link-Belt Cranes

Lexington, Kentucky, USA | www.linkbelt.com

ON THE INSIDE

www.craneandtransportbriefing.com

23

AMERICAN CRANES & TRANSPORT

The magazine for the crane, lifting and transport industry www.craneandtransportbriefing.com A KHL Group Publication

INTERVIEW

Liebherr’s Simon Schuster p16

PERSPECTIVE

Tariffs: a corrective response? p15

TOP LIST

p37

Official domestic magazine of the SC&RA

The big show!

2026 show guide issue p42

ConExpo Con/Agg 2026 convenes in Las Vegas this week. Don’t miss our show guide starting on page 42.

ISSN No: 1555-1830 (print) ISSN No: 2995-9136 (online) MARCH 2026 | VOLUME 22 | ISSUE 3 © Copyright KHL Group Americas LLC 2026.

All rights reserved. Reproduction in whole or in part without written permission is prohibited.

American Cranes & Transport makes every effort to ensure that editorial and advertising information carried in the magazine is true and accurate, but KHL Group Americas LLC cannot be held responsible for any inaccuracies and the views expressed throughout the magazine are not necessarily those of the publisher.

KHL Group Americas LLC cannot be held liable for any matters resulting from the use of information held in the magazine. The publisher is not liable for any costs or damages should advertisement material not be published.

ACT is published 11 times a year by KHL Group Americas LLC, 11811 N. Tatum Blvd, Suite P118, Phoenix, AZ 85028. This issue is mailed on February 25, 2026.

SUBSCRIPTIONS: Annual subscription rate is $301. Free subscriptions are given on a controlled circulation basis to readers who fully complete a Reader Subscription Form and qualify under our terms of control.

The publisher reserves the right to refuse subscription to non-qualified readers.

ASSOCIATIONS

PUBLISHED BY

42

67

August 2019 March 2026 Volume 15 n Issue 8

PHOTO © ROBERT DIMMITT PHOTOGRAPHY

ON THE OUTSIDE

11

EVENTS

FEATURES

11 PREVIEW SC&RA ANNUAL CONFERENCE

15 PERSPECTIVE

The Specialized Carriers & Rigging Association Annual Conference features full slate of education, networking and industry recognition.

16 INTERVIEW

Liebherr’s Simon Schuster is the consummate team player.

D.Ann Shiffler reports.

42 SHOW GUIDE CONEXPO

ACT’s show guide to ConExpo Con/Agg 2026.

DEPARTMENTS 6 NEWS/EVENTS

Check out the latest headlines, project updates and industry developments.

37 SPECIALIZED RIGGING&LIFTING50

The SLR50 is resilient, showing modest but steady growth in 2026.

79 CCO CERTIFICATION NEWS

CCO Certification’s Employer Recognition Awards honor organizations that invest in competence, certification and safer jobsite outcome.

106 MOVING UP

Spotlighting people, promotions and progress.

Official domestic magazine of the SC&RA

69 SC&RA COMMENT

Resetting the broker playing field. Joel Dandrea discusses.

70 SC&RA NEWS

19 RIGGING MATTERS

Support for your lifting equipment is not the place to cut corners. David Duerr reports exclusively.

23 PRODUCT FOCUS RIGGING GEAR ROUNDUP

Hannah Sundermeyer rounds up the latest rigging innovations across North America.

33 INDUSTRY SPOTLIGHT PILOT CARS

Pilot cars are critical once the load is approved.

63 BUSINESS AND FINANCE

Tonya Fry discusses the good, the bad and how to protect yourself in private party sales.

67 SITE REPORT LIFTING

Budrovich supports steeple inspections at the Cathedral Basilica of St. Louis.

MARKETPLACE Starts on page 81

TRAINING DIRECTORY SLINGS & THINGS PERMITS & PILOT CARS DEALER LOCATOR

SC&RA committees are moving beyond reactionary work toward proactive safety and strategic engagement.

PRODUCTS, PARTS & ACCESSORIES

73 RISK MANAGEMENT

TRANSPORT & HEAVY HAUL

Chuck Cooke discusses situational awareness. www.craneandtransportbriefing.com

Frank Bardonaro contends that tariffs can lift up the American crane rental industry.

EQUIPMENT FOR SALE OR RENT SAFETY & TRAINING CAREER OPPORTUNITIES

MARCH 2026 ACT

5

BRIEFLY

Omega Morgan officially acquires Omega Riggers

n The North American construction industry is preparing to make history at ConExpo 2026, with organizers planning a Guinness World Records attempt for the most people wearing high-visibility vests during the trade show’s opening ceremony in Las Vegas. n Link-Belt Cranes has named its top five distributors for 2025, recognizing dealers that delivered standout performance across marketing, sales and customer support throughout the year. The 2025 distributors, listed alphabetically, include Atlantic & Southern Equipment, Doggett Crane Services, Holt Crane & Equipment, Mardian Equipment Company and Wood’s CRW Corporation.

O

mega Morgan, a provider of heavy rigging, machinery moving and specialized industrial services has acquired Omega Riggers, a Seattle-based machinery moving and rigging company.

As part of the transaction, Omega Riggers will operate as Omega Morgan, bringing the two organizations together under one name. Terms of the deal were not revealed.

The acquisition brings together two companies that have worked in the same market and were often mistaken for one another, according to Omega Morgan.

Leadership from both organizations said the move is intended to eliminate market confusion while strengthening capabilities for employees and clients.

The acquisition will alleviate confusion in the market and strengthen capabilities.

“This is something we’ve talked about over several years,” said Wes Cotter, owner of Omega Riggers. “We’ve grown significantly over the last few years, and this felt

like the right time to take the next step. The fit was right, the culture matched and the timing made sense.”

Cotter will remain with the company and employees will continue in their current roles, with existing contracts and compensation remaining in place. n

Izzi Trucking & Rigging enters heavy haul sector Izzi Trucking & Rigging is expanding into the super heavy haul trucking and rigging sector, marking a significant evolution for the New Jersey-based carrier. The move reflects the company’s strategic response to growing demand for increasingly complex, large-scale transportation projects.

As part of this expansion, Izzi has enhanced its fleet with dual-lane capabilities,

Izzi has enhanced its fleet with dual-lane capabilities, incorporating perimeter frame and suspension hauling.

incorporating perimeter frame and suspension hauling configurations. These additions are designed to meet stringent weight regulations

TCNA 2026 keynote speaker confirmed Tower Crane North America’s 2026 program has confirmed its first keynote address, “A 40-Year Evolution,” delivered by industry veteran Peter Juhren, president and COO of Morrow

6 ACT MARCH 2026

Equipment. Drawing on more than four decades in the tower crane sector, Juhren will reflect on how the industry, equipment and regulatory landscape

while maintaining low travel heights required for oversized and super-heavy loads.

“This expansion is a natural next step for our company," Morrow Equipment's Peter Juhren headlines TCNA, June 10-11 in Nashville. have evolved and the challenges that have shaped the business.

The program continues with a panel discussion, “Wind,

said David Izzi, president.

"As project demands grow in scale and complexity, we’re positioning ourselves to provide the advanced solutions our clients need, backed by the same reliability we’ve built our name on for more than 50 years.” n Weather and Rising Storms,” led by JR Moran of Brasfield & Gorrie, featuring panelists Chris Noblitt of Manitowoc Potain, Matt Finnerty of Finnco Services and Rob Posch, P.E., of Posch Engineering. The panel will examine how tower cranes are engineered to withstand wind and severe weather, how wind www.craneandtransportbriefing.com

NEXT UP

NEWS

NEXT UP

NEWS

2026

MARCH CONEXPO-CON/AGG March 3-7 Las Vegas, NV Las Vegas Convention Center March 2-4 THE ARA SHOW Orlando, FL Orange County Convention Center arashow.org APRIL April 20-23 AWRF SPRING PIE & TECHNICAL SUMMIT Marriott Marquis Houston awrf.org

ASSET

WATCH

Seaboard Marine invests in electric LHM 550s

L

iebherr will supply three LHM 550 mobile harbour cranes to Seaboard Marine for deployment across its private terminals at PortMiami and the Port of Houston.

Configured in a high-rise setup, the cranes are intended

April 20-24 SC&RA ANNUAL CONFERENCE Amelia Island, FL Omni Amelia Island scranet.org MAY May 4-7 OFFSHORE TECHNOLOGY CONFERENCE Houston, TX NRG Park 2026.otcnet.org JUNE June 1-3 CLEANPOWER 2026 CONFERENCE & EXHIBITION Houston, TX George R. Brown Convention Center cleanpower.org June 10-11 TCNA 2026 Nashville, TN Music City Center khl-tcna.com

tolerances are established, best practices for storm preparation and more.

TCNA sponsors include Silverlevel supporters Comansa, Liebherr and Raimondi/Terex Tower Cranes. Bronze-level sponsors include Bishop Lifting, Bondura Technology and JASO Tower Cranes. Top List www.craneandtransportbriefing.com

to enhance container handling capacity at two of Seaboard Marine’s primary U.S. gateways supporting trade throughout the Americas.

At PortMiami, where more than 1.1 million TEUs were handled in 2024, the additional crane capacity is expected to improve berth productivity and support growth in refrigerated cargo and breakbulk shipments. The new cranes will complement the company’s expanding LNGpowered fleet while helping One of three Liebherr LHM 550 mobile harbour cranes prepared for shipment to Seabord Marine’s U.S. terminals, featuring custom structural adaptions.

maintain efficient vessel turnaround times during peak operating periods.

At the Port of Houston, which set a new record last year by handling more than 4.1 million TEUs, the LHM 550s will provide added flexibility for container handling and support Seaboard's service model.

With an outreach of up to 177 feet and a lifting capacity of up to 115 tons, the cranes are capable of servicing New-Panamax vessels while preserving efficiency. The cranes feature electric drive systems designed to support future shore-power initiatives, along with hydrostatic drive technology. n

Bennett adds new Texas foreign trade zone An aerial view of Bennett’s new terminal shows the expanded Bennett and BOSS Companies expanded their Gulf Coast logistics footprint with the activation of a 15-acre Foreign Trade Zone at its Dayton, TX facility, strengthening port connectivity and project cargo support just northeast of Houston.

The new FTZ is at Bennett’s Dayton terminal, which serves Bennett On-Site Services (BOSS), BOSS Heavy Haul and Bennett Motor Express from a single campus. The site includes an 80-acre sponsors for 2026 are Cropac Equipment and Tipton Crane.

SC&RA is a partner with KHL Group hosting TCNA.

To register to attend, scan the QR code or visit: khl-tcna.com

campus, including an 80-acre yard, office facilities and the newly activated 15-acre foreign trade zone. PHOTO: BENNETT

yard, a 10,000-square-foot office facility and 15 acres of activated FTZ space dedicated to customer storage.

The FTZ area is designed for the storage and staging of cargo moving inland from the port, including pipe spools, coolers, lithium batteries and other specialized equipment.

Goods entering an FTZ are not subject to import duties or taxes until released for domestic consumption, providing customers with greater financial and

operational flexibility.

“This expanded footprint allows us to better support complex logistics and project cargo needs while offering EPCs and freight forwarders greater flexibility,” said Mark Brewton, general manager of the Bennett Motor Express Houston terminal. “By delivering cargo directly into a foreign trade zone, Bennett helps customers defer upfront tariff costs and better align import timing with project schedules.” n MARCH 2026 ACT

7

NEXT UP CONTINUED

NEWS June 2-4 CRANE RENTAL ASSOCIATION OF CANADA Halifax, NS TBD crac-aclg.org SEPTEMBER September 22-24 SC&RA CRANE & RIGGING WORKSHOP Omaha, NE Hilton Omaha and the CHI Health Center scranet.org

BRIEFLY

For all trade show listings, scan the QR code or visit: www.khl.com/ all-events-diary

n SC&RA wants to hear from you. Tariffs on steel and equipment are driving up costs and causing major project delays across the specialized transportation, crane and rigging industry, particularly in infrastructure, energy and data center work. If your company has experienced significant tariff-related equipment delays, SC&RA encourages you to share your firsthand experience with Joel Dandrea at Jdandrea@scranet.org.

Link-Belt crawler assists water facility upgrade

A

300-ton crawler crane from LinkBelt Cranes is playing a central role in the reconstruction of a major water treatment facility in Raleigh, NC. Led by English Construction, the nearly $50 million project at the E.M. Johnson Water Treatment Plant is designed to increase clean water production by approximately 25 percent, expanding capacity from 90 million gallons per day to 120 million gallons per day.

The facility currently supplies about 90 percent of Raleigh’s potable water.

The project involves

dismantling, reconstructing and demolishing 60-yearold sedimentation basins and ancillary piping while maintaining operations at the active plant. A Link-Belt 348 Series 2 crawler crane, configured with 140 feet of main boom, 180 feet of luffing jib and 80 feet of fixed jib, is handling key lifts, including a 74-foot, 19,000-pound rake arm/bridge and a 9,000-pound plate settler that will replace the original equipment.

According to English operator Tim Tebbe, the crane provides the capacity and reach required for the site’s varied lifting demands.

The project will produce around 25 percent more clean water for the local population.

“The 348 Series 2 gives us enough capacity and reach to complete every task out here,” Tebbe said. “It has the picking power you need, and it’s been performing great.” n

Sarens delivers modules in Québec Sarens has completed a complex heavy transport scope in Québec, Canada, delivering 10 large equipment units safely and ahead of schedule under tight timelines and challenging site conditions. The project required rapid mobilization and precise execution,

Military veterans are untapped workforce The NCCCO Foundation has published new workforce research examining how military veterans find, experience and navigate careers in the crane industry, offering fresh insights into recruitment opportunities and ongoing workforce challenges.

The report was developed in collaboration with SmallBox Consulting and explores four key questions: how veterans discover careers in cranes, what makes veterans a strong fit for the industry, why the crane industry appeals to veterans and the challenges veterans face transitioning into the civilian workforce.

“The new research reinforces that veterans represent an untapped source of high-quality potential employees and that the crane industry provides a unique environment that is a very good fit for the skills and values of veterans,” said T.J. Cantwell, executive director, NCCCO Foundation.

with Sarens receiving nine modules and one lift frame on short notice at the Port of Bécancour. Following offload and staging on engineered mats and supports, the cargo was transported to site in five barge shipments, with two modules per barge.

Restricted access along the riverbank presented a key logistical challenge, prompting Sarens to design and construct a 60-meter temporary bridge linking the shoreline to a beached barge. The bridge enabled controlled roll-on/roll-off operations and was engineered to accommodate dual trailer

trains with varying axle configurations. Mobilization of the bridge began before final design issuance, allowing construction to align with vessel schedules and port constraints and helping the team complete execution two weeks ahead of contract.

The operation relied on 38 lines of SPMTs, six ballast pumps, 450 concrete staging blocks and approximately 500 tonnes of steel and mats.

Engineering, marine, transport and site crews worked in close coordination throughout the project, maintaining productivity despite persistent rain. n

Sarens constructed a 60-meter temporary bridge to support roll-on/roll-off operations during a heavy transport project in Québec, Canada.

To read the full report, please visit: ncccofoundation.org/research/military-veteran-research

8 ACT MARCH 2026

www.craneandtransportbriefing.com

13783-2003_LBC_099_K-Series 1_2025_09-ENG-USA-200x273-v02.indd 1

22.01.2026 14:38

Visit us in Las Vegas Booth F47010

REACHING NEW HEIGHTS We strive to exceed your expectations and help your business succeed with our world-leading lifting and access equipment that is renowned for reliability, efficiency, innovation and safety. Our team is standing behind you, no matter where in the world you are, to ensure that your Tadano products perform in every environment and in every situation.

© Tadano Ltd. 2026

If your business wants to reach new heights, Tadano is the right choice.

With an eye on the future we are expanding our horizons, optimizing our strengths and driving green innovation.

We constantly develop and evolve our products, services and solutions to add value whenever possible.

When you choose Tadano, you’re taking your business to the next level and reaching new heights.

www.tadano.com

TDN_RNH-Image-Advert_US-2026_ACT_7.875x10.75_CONEXPO26.indd 1

06.12.25 23:49

SC&RA ANNUAL CONFERENCE PREVIEW The 2026 Annual Conference will be held April 20–24 at the Omni Amelia Island Resort, located on the picturesque Amelia Island, FL.

Annual rhythm The Specialized Carriers

The sold out Exhibit Center offers an opportunity to explore new solutions while networking with peers from across the industry.

& Rigging Association Annual Conference, held April 20-24, 2026, returns with a full slate of education, networking and industry recognition.

E

ach year, the SC&RA Annual Conference provides a moment for the industry to step away from daily operations and engage with the broader forces shaping its future. In 2026, that gathering unfolds April 20-24 at the Omni Amelia Island Resort, located on the picturesque Amelia Island, FL, where owners, executives and managers will convene for five days of education, committee collaboration and networking.

The program is designed to move deliberately from governance and policy to leadership and strategy, while leaving space for informal conversations that often prove just as valuable as time spent in session.

The conference opens Monday afternoon, April 20, with registration and executive committee meetings, followed by the Past Chairman’s Dinner. That evening

also features the First-Timers’ Reception, offering new attendees a chance to connect with SC&RA officers, staff and fellow members before the week’s full program begins.

By Tuesday morning, committee meetings across crane and rigging, transportation, safety, labor, permitting, insurance and workforce development are already underway, reinforcing the member-driven foundation of the Association.

Tuesday afternoon turns to issues with direct impact on business operations.

The Opening Session, “Tort Reform: The Current Landscape and National and State Priorities,” runs from 1:00 to 2:30 p.m. and examines how litigation trends, nuclear verdicts and third-party funding are influencing insurance costs and risk exposure.

Sherman “Tiger” Joyce, president of the American Tort Reform Association, and

SHERMAN “TIGER” JOYCE

MARK GRUNGOR

Early momentum

RICHARD PIANKA

www.craneandtransportbriefing.com

ROSE AUGSTIN

SCOTT STRATTEN

MIKE ROSENDAHL

Richard Pianka, general counsel for the American Trucking Associations, will outline where reform efforts are gaining traction and how industry stakeholders can engage in the process.

Lessons learned

That conversation continues from 2:45 to 4:15 p.m. with “Lessons Learned in a Challenging Insurance Market.”

Moderated by Rose Augustin of National Interstate, a panel brings together SC&RA members and a loss control specialist to share practical approaches to managing total cost of risk, preventing claims and responding effectively when losses occur.

Together, the two sessions frame the

HARRY FRY

LEE DANHAUER

>12

MERRIL HOGE MARCH 2026 ACT

11

PREVIEW SC&RA ANNUAL CONFERENCE

legal and insurance environment many members are navigating daily.

Brand shifts

Wednesday begins with the Link-Belt Breakfast from 7:30 to 8:45 a.m., featuring communication speaker Mark Gungor and his presentation, “Tale of Two Brains.” Known for blending humor with insight, Gungor explores how differences in thinking styles influence leadership, teamwork and communication in the workplace.

The breakfast sets the tone for a day that balances governance with broader business discussion, as crane and rigging and transportation group governing committee meetings follow later in the morning.

Wednesday afternoon focuses on leadership and market dynamics.

During the sponsored lunch session, “Unbranding: Loyalty in the Age of Disruption,” author and speaker Scott Stratten examines how organizations can navigate constant change without losing sight of core values and culture.

Later that day, “Volatility in Equipment Valuations” brings together Lee Danhauer of Jeff Martin Auctioneers, Harry Fry of Harry Fry & Associates and Mike Rosendahl of PCE Investment Bankers to discuss how tariffs, taxation and shifting economic conditions are influencing equipment pricing, financing and resale decisions.

Exhibit pulse

Thursday morning opens from 7:30 to 8:45 a.m. with “Find a Way Every Day,” a keynote delivered by former NFL running back Merril Hoge, and sponsored by Trail King. Drawing on his journey from small-town Idaho to the professional football ranks with the Pittsburgh Steelers and Chicago Bears, Hoge reflects on the moments that tested his resilience both on and off the field. Facing careerending head trauma, a cancer diagnosis and open-heart surgery, he shares how a simple mantra — “find a way” — became a guiding principle for leadership, accountability and perseverance, with lessons that extend into business, family life and personal ownership.

The next focus of Thursday is the highly-anticipated Exhibit Center, open from 9 a.m. to noon. With exhibitors representing equipment manufacturers, service providers and technology firms, the Exhibit Center offers a concentrated opportunity to explore new solutions while connecting with peers from across the industry.

The afternoon turns competitive as the Rigging Job of the Year competition runs from 1:30 to 5 p.m., highlighting innovation, planning and execution behind some of the industry’s most complex projects.

Thursday evening is reserved for “Making Waves: SC&RF’s 40th Anniversary Celebration,” a fundraiser

marking four decades of workforce development, education and research supported by the SC&RA Foundation.

Running from 7 to 10 p.m., the beachthemed event combines celebration with purpose, reinforcing the Foundation’s long-term impact on the industry.

Resilient close

Friday morning opens with the Annual Membership and Board of Directors Meeting, followed by the Hauling Job of the Year competition from 9:45 a.m. to 2:45 p.m., where teams showcase logistical expertise and problem-solving at the highest level.

The conference concludes with the Board of Directors and International Reception and the Closing Night Awards Dinner, where Job of the Year honors, safety awards and membership milestones are recognized.

More than a schedule of sessions, the SC&RA Annual Conference remains a place where the industry gathers to exchange ideas, recognize excellence and strengthen relationships. With programming that spans policy, risk management, leadership and innovation, the 2026 Annual Conference continues that tradition — offering perspective, momentum and connection as the industry looks ahead n

Every year, the Annual Conference hosts the famous Jobs of the Year competition.

Members are encouraged to submit projects that showcase impressive hauling and rigging feats.

12 ACT MARCH 2026

www.cranebriefing.com

www.kcmu-cranes.com

Trusted Industry leader Delivering Superior Quality

- Visit Us at ConExpo 2026 Festival Lot - Booth: F35004

PERSPECTIVE

Tariff counterpoint F

or more than four decades, I have been involved in the crane, rigging and specialty rental industry. I am a lifelong advocate for this business and have been actively involved with the Specialized Carriers & Rigging Association (SC&RA) for over 25 years. Today, as the CEO of a company with very limited access to U.S.-based manufacturing, tariffs are material to my business as well.

That is precisely why much of the current outrage over U.S. tariffs in the crane industry is misguided.

The loudest voices attacking tariffs would have you believe they represent an existential threat to U.S. crane owners. In reality, tariffs are a corrective response to a problem decades in the making – one that our industry largely ignored while it was convenient to do so.

Let’s be clear about history. The global crane market has never been a freetrade environment. For years, U.S. manufacturers and crane owners were effectively blocked from selling new or used cranes into countries such as Japan, Brazil and Germany through a combination of tariffs, regulatory barriers, certification requirements, local-content rules and administrative hurdles. At the same time, European and Asian manufacturers enjoyed largely unrestricted access to the U.S. market.

That imbalance mattered.

I remember when we were forced to shut down a U.S. tower crane manufacturing facility in Wilmington, NC – not because the workforce or quality failed

THE AUTHOR Frank G. Bardonaro, Jr. is president and CEO of Brock Group, based in Houston. His experience includes roles with Maxim Crane Works, Terex Cranes and AmQuip.

Tariffs are a corrective response to a problem decades in the making. www.craneandtransportbriefing.com

Frank Bardonaro contends that tariffs are not a weakness and can lift up the American crane rental industry.

– but because it had become cheaper to manufacture cranes in Italy, France and Germany and ship them across the Atlantic than to continue producing them domestically. That was not a failure of American labor or engineering. It was the result of long-standing trade imbalances.

And nearly every crane owner has lived the next chapter of that story. Many of us have purchased a European-built crane at a lower upfront price than a comparable U.S.-built machine, only to later discover that replacement parts for the same size engine, motor or component cost two times-or more-than they would have from a domestic manufacturer. That pricing power exists only because prior practices drove U.S.-based manufacturing out of the market.

Competition reduced

Roughly 20 to 25 years ago, foreign manufacturers dumped equipment into the United States at prices that were not economically sustainable. This wasn’t because the products were better. It was because the strategy was to buy market share. U.S. manufacturers could not compete with below-cost pricing, nor could they ship equipment overseas to offset losses. One by one, domestic manufacturing options disappeared.

Once competition was reduced, pricing power shifted.

Those same global manufacturers that once underpriced the market began raising prices-on new equipment, parts, service and support-without ever assuming the operational risks borne by U.S. crane owners. We carried the labor risk, the financing risk, the regulatory risk and the utilization risk. They controlled the supply.

Many owners remember what happened during supply shortages about 15 years ago. We were required to pay in advance just to “hold” production slots – only to see those slots sold to Europe, the Middle East or Asia at higher margins while U.S. deliveries were delayed. That could only happen because domestic alternatives no longer existed.

Add to that currency dynamics. When the Euro traded near $1.35 to the dollar, global manufacturers passed every cost increase straight through to U.S. buyers. We were told, quite plainly: take it or lose it.

Now here is the uncomfortable truth no one wants to address.

The price of a new crane has more than doubled over the last 15 years. Ownership costs – purchase price, parts, service, compliance and capital-have exploded.

Rental rates have not.

ROI problem

Many U.S. crane companies are charging rates today that do not reflect inflation, let alone the true cost of capital. That is not a tariff problem. That is a return-oninvestment problem.

Recently, I was told tariffs could add roughly $500,000 to the cost of a new 500ton all-terrain crane. Spread over a 15-year ownership period, that equates to roughly $17 per operating hour. Raise your rate accordingly and the cost disappears – while asset value, borrowing base and market discipline improve.

Crane rental typically represents about 2 percent of total project cost. A modest increase does not kill projects – but failing to price responsibly will kill owners.

The only real beneficiaries of attacking tariffs in the crane industry are European, Japanese and Chinese manufacturers who have enjoyed decades of asymmetric access while dictating pricing and supply to the U.S. market.

The U.S. crane industry has always been resilient. We have persevered through economic cycles, supply disruptions and decades of reliance on outside manufacturing. This moment is not a threat; it is an opportunity. Tariffs are not the primary issue for the crane rental industry. Failure to manage rental rates that support increased costs, inflation, insurance and liability are the primary factors negatively impacting the industry.

Tariffs can support growth in my industry, as well as the crane rental industry, if we choose to lead rather than complain. n MARCH 2026 ACT

15

INTERVIEW

An up-and-comer with Liebherr Cranes USA, Simon Schuster is the consummate team player.

Rising s

W

hat if you started a new job in a new country, and your first big project is 2026 ConExpo Con/Agg in Las Vegas?

This is the exact situation Simon Schuster is facing, and with the support of his team, he is confident in success. As the new divisional director for Liebherr’s mobile and crawler cranes in the U.S., Schuster is looking forward to the big event, conversing with customers and celebrating the partnerships Liebherr has with its customers.

Moving up

Schuster started at Liebherr in 2018 as a sales trainee at Liebherr-Werk Ehingen, where he underwent comprehensive on-the-job training across multiple business units and departments. His training also included a two-month assignment in the U.S. and Canada.

“In 2020, I advanced to the role of area sales manager for the U.S. and Canada, serving as a key liaison between these markets and Liebherr-Werk Ehingen,” he said. “In this capacity, I was responsible for aligning sales strategies, engineering coordination and production planning, while maintaining daily communication with divisional directors, management and sales representatives.”

As divisional director, he is responsible for ensuring the best possible support for U.S. mobile and crawler crane customers, including new and used crane sales, customer service and spare parts. He brings extensive knowledge and experience with the U.S. market, having worked closely with both the U.S. team and customers over an extended period through his responsibilities in Ehingen.

“I look forward to using my expertise to continue to drive the sales growth of the mobile and crawler crane product portfolio and the service organization in the USA.

A team player

With a lot on his plate in terms of helping pull off a huge trade show and starting his new job in the United States, Schuster is optimistic. He is grateful for the support of his team throught the transition. Whatever

16 ACT MARCH 2026

With 66,000 square feet of exhibit space, and one of ConExpo’s largest exhibitors, Liebherr will showcase developments across its full crane portfolio. gets thrown at him, Schuster and his team are ready to take it on together, he said. I think you will be interested in his answers to our questions, especially his career advice to a newcomer in the crane industry. As well, he teased a new crane model that is making its world premiere at ConExpo this month.

WHAT MADE YOU DECIDE TO PURSUE A CAREER IN CRANE SALES?

I really enjoy the mixture of dealing with state-of-the art technology for a market leader and building relationships with people, both employees as well as customers.

WHAT DO YOU LIKE ABOUT THE BUSINESS?

I like the impressive projects that our cranes are being used for and the special team of people involved, from manufacturing to sales, all the way to the service of the cranes. As odd as it may sound, the crane industry often feels like a large family.

HOW DO YOU DESCRIBE THE MARKET FOR CRANES IN NORTH AMERICA? (RTS, ATS, CRAWLERS AND TOWER CRANES)

To me there is no doubt that North America is one of the most impressive markets for mobile and crawler cranes.

RTs are very special for the U.S. market and are definitely not as popular in Germany. The focus customers have on safety and the U.S. market are in line with our goal to provide the safest product with maximum uptime to our customers. www.craneandtransportbriefing.com

INTERVIEW

g star

WHAT CRANES ARE IN MOST DEMAND?

This is a very hard question to answer; the projects and jobsites across the USA are very different and that’s reflected in the full line of cranes that we offer.

WHAT ARE THE BIGGEST CHALLENGES IN THE AMERICAN MARKET TODAY?

Our motivation is to be a reliable source of support in every regard for our customers.

The size of the United States itself, as well as the installed crane fleets, are factors that need to be considered to ensure uptime and customer satisfaction.

WHAT ABOUT TARIFFS? HOW ARE THEY AFFECTING SALES AND YOUR CUSTOMERS?

Building and maintaining strong relationships with our customers is crucial. Regardless of the challenges we face, we are committed to navigating them together.

WHAT IS YOUR FAVORITE LIEBHERR CRANE?

I think if I had to pick one, I’d say the LTM 1230-5.1. Roadability in the U.S. is key, and this crane type has the capability to be driven almost anywhere the U.S. Personally, I like this crane as it was introduced right around the time when I started my career with Liebherr.

CONEXPO IS COMING UP. WHAT ARE YOU LOOKING FORWARD TO IN TERMS OF THIS SHOW?

I like the impressive projects that our cranes are being used for and the special team of people involved, from manufacturing to sales, all the way to the service of the cranes. As odd as it may sound, the crane industry often feels like a large family. www.craneandtransportbriefing.com

SIMON SCHUSTER, Divisional Director of Mobile and Crawler Cranes, Liebherr USA

As I am attending this show for the first time in my new role, I am looking forward to having great conversations and celebrating the partnerships we have with our customers. It will be incredibly exciting to see how the market reacts to a new model that is making its world premiere in Las Vegas.

WHAT IS THE BEST CAREER ADVICE THAT YOU CAN GIVE A NEWCOMER IN THE CRANE INDUSTRY?

Nobody is starting as an expert. Be honest. If you don’t know the answer to a question, do the necessary research and follow up. Internal and external customers will appreciate your honesty.

WHAT DO YOU DO IN YOUR LEISURE TIME?

I enjoy a bit of everything I guess, including tennis, running, watching movies and sports, reading, music and traveling. I am looking forward to exploring new hobbies in the U.S. n MARCH 2026 ACT

17

RIGGING MATTERS

Ground control Support for your lifting

The SC&RA Guide to Outrigger Pad Materials, Selection and Usage addresses the range of topics one must understand to select and use outrigger pads safely.

equipment is not the place to cut corners. David Duerr reports exclusively.

W

e all understand the importance of planning for load handling operations. Select the right crane and rigging gear, lay out the equipment arrangments, plan the work and make sure that all of the crew members know their jobs. Without the right support under the crane, though, none of the rest of this matters. Adequate support is absolutely essential.

KNOW THE EQUIPMENT AND KNOW THE SITE: To plan the crane support, the lift

planner must know the loads that the crane will impose of the ground and what level of pressure the ground can safely support (the allowable ground bearing pressure).

Figuring out the loads imposed by the crane, whether outrigger loads or track bearing pressures, is often easy. Some of the major crane manufacturers now have teamed up with A1A Software by providing information about their cranes for incorporation into 3D Lift Plan.

Other manufacturers maintain their own applications that can be used to calculate support loads for their crane models.

THE AUTHOR David Duerr, P.E. (ret.), is president of 2DM Associates, which he founded in 1986. He entered the rigging industry in 1974, working for Hoffman International, followed by VSL Corporation, Williams Crane & Rigging and McDermott International. Duerr is the author of Mobile Crane Support Handbook, and Telescopic Hydraulic Gantry Systems. He currently serves as a Contributing Member on the ASME P30 Committee and provided an independent review of the SC&RA Guide to Outrigger Pad Materials, Selection and Usage. www.craneandtransportbriefing.com

Either way, the key to the successful use of these applications is assuring that all information entered into the input fields is accurate (load, radius, swing angles, boom type and length, boom tip extensions or jibs, counterweight size, crawler pad size, and outrigger extension position). Carelessness in defining the crane and the lift parameters here can result in inaccurate results.

WHAT IS THE ALLOWABLE GROUND BEARING PRESSURE? This can be a difficult

question to answer because of the many factors involved. A hard surface layer only a couple of feet thick can hide soft soil below. This hard surface layer alone often will not be strong enough to support the loads from a large crane. Additionally, underground structures, such as pipes, culverts, buried tanks and the like, can be the weak link in determining the allowable ground bearing pressure. And when working anywhere around new construction, one must ask how well any backfilled areas has been compacted.

When planning major lifts in a safetycritical location, such as in a refinery, it is common practice to have a geotechnical engineer take soil borings and prepare a detailed report that shows the allowable ground bearing pressure at the surface.

For smaller jobs with a short schedule, getting a geotechnical investigation done is often not practical, so the allowable ground bearing pressure often must be estimated based on past experience at the site or by simply working with a very low allowable bearing pressure. However,

when making assumptions about the allowble ground bearing pressure, never lose sight of the fact that without adequate support of the crane, nothing else matters.

SHOULD CRANE MATS OR OUTRIGGER PADS BE USED TO SUPPORT THE CRANE? The

short answer to this question is: Yes. Soil conditions in many locales are such that all except the smallest cranes will require some type of load spreading materials to reduce the pressures imposed by the crane to values low enough that the crane can be supported safely. This means that crane mats or pads are needed most of the time.

Crane mats serve two purposes. First, they must spread the load from the crane over a large enough area that the bearing pressure imposed on the ground by the crane is less than the allowable ground bearing pressure. Second, the mats must provide support to the crane that is stiff enough that the crane will not go out of level as the loads from the crane change during lifting operations.

Evaluating the strength, stiffness, and load spreading ability of a crane mat requires preparing engineering calculations. A practical method of performing these calculations, called the Balanced Mat Analysis Method, is detailed in Chapter 4 of the author’s book Mobile Crane Support Handbook.

We also have two other very useful tools for designing the support of a crane. The first is the SC&RA Guide to Outrigger Pad Materials, Selection and Usage. The SC&RA Guide addresses the range of topics one must understand to select and use outrigger pads safely. These topics include the applicable aspects of lift planning, descriptions of the various types of pads available, job site considerations

>20

MARCH 2026 ACT

19

RIGGING MATTERS

When it comes to the support of a mobile crane, the bottom line is simple. Without

that may affect equipment location and setup, and guidelines for outrigger pad setup and use. The SC&RA Guide also provides a list of outside references for those situations where more in-depth information is needed.

The second is

adequate support (strength and stiffness), a mobile crane cannot operate safely.

The Nonmandatory D appendix of P30.1, (2024 edition) provides information and guidance for the selection and sizing of outrigger pads, timber crane mats, steel crane mats and the like.

SPECIALTY SOLUTIONS FOR YOUR MOST COMPLEX PROJECTS When your project calls for specialized equipment or expert insight, Deep South Crane & Rigging is here to support you. With a deep inventory and decades of experience, we offer tailored solutions for complex lifts and heavy transport. From our powerful VersaCrane™ fleet to custom-engineered bridge systems, cantilever bars, gantries, and more, we deliver the tools and expertise to keep your project moving forward.

Whether you’re up against a tight timeline, a one-of-a-kind lift, or a critical transport challenge, we’re ready to step in to meet your project’s demands with precision. Let’s talk about how we can support your next project. DEEPSOUTHCRANE.COM

PROJECT SUPPORT · SPECIALTY BRIDGES · CANTILEVER BARS JACKING & SKIDDING · GANTRIES · CRANES · TRANSPORTERS

Nonmandatory D in ASME P30.1-2024 Planning for Load Handling Activities.

This appendix, new in the 2024 edition of P30.1, provides technical information and guidance for the selection and sizing of outrigger pads, conventional timber crane mats, steel crane mats, and the like. This all starts with a detailed flow chart that organizes the process necessary to design and specify a safe support system for load handling equipment.

The actual evaluation of conventional crane mats, whether made of large timbers or of structural steel beams, often presents a challenge to the lift planner who does not have a strong engineering background. Appendix D includes not only a detailed discussion of how mats perform to distribute the support loads to the ground, but also includes graphs by which the load spreading ability of timber and steel mats can be determined.

The timber mat curves are based on the species of wood commonly used for mat construction in the United States and Canada. The steel mat curves are based on a range of section properties (that is, the section modulus of the beams), as noted on the graphs. The calculation method used to generate these graphs are as developed in the Mobile Crane Support Handbook. Example problems illustrate the use of these graphs.

DETERMINING THE MAT. The most common types of crane mats are made from rough-sawn hardwood or softwood timbers. Timber crane mats are widely available from vendors through the world.

There is also a variety of synthetic pads for small to medium outrigger-supported cranes.

When it comes to the support of a mobile crane, the bottom line is simple.

Without adequate support – strength and stiffness – a mobile crane cannot operate safely. Those responsible for the planning and performance of the crane work, regardless of the complexity of the lifts, must go through the steps necessary to assure that the crane’s support meets the specific demands of the job. n The Balanced Mat Analysis Method is detailed in the Mobile Crane Support Handbook. www.craneandtransportbriefing.com

Discover the Future of Mixed Fleet Business Management and Lift Planning!

3D LIFT PLAN SKETCH PAD

RIGGING DESIGNER Visit us in Festival Lot Booth #F29067 March 3-7, 2026 Las Vegas, NV

COMPETE in our VR Crane Rodeo and CHECK out our Kid’s Zone!

a1asoftware.com | 904-430-0355

JOBSITE DESIGNER 3D LIFT VISION MORE TOOLS FOR YOUR LIFT PLANNING NEEDS! • 3D Lift Plan.com • iCraneTrax • Load Chart Viewer • Crane Loads & Mat Calculators

AMERICA

ISN’T GOING TO BUILD ITSELF.

Maxim Crane Works, the nation’s leading heavy-lifting solutions provider, is rising to meet the toughest challenges out there. We serve the non-residential building, infrastructure, and industrial manufacturing industries with unmatched expertise, next-level capabilities, and a deep commitment to safety. With a large, diverse fleet, you get the crane you need, where and when you need it. We invite you to Rise With Us and experience the Maxim difference.

GET STARTED AT MAXIMCRANE.COM

RIGGING GEAR ROUNDUP PRODUCT FOCUS

At the ready

The Slingmax Helix high-performance synthetic roundsling is designed with a smaller profile to fit tight pick points while maintaining high capacity.

Hannah Sundermeyer rounds up the latest in rigging innovations across North America.

R

igging crews are being asked to do more with less – tighter schedules, fewer people on the ground, more complex picks and higher expectations around documentation, inspection and repeatable performance. At the same time, jobsite realities like limited headroom, constrained access, irregular load shapes and unpredictable weather continue to test the basics: control, communication and safety at every lift point.

This roundup highlights products designed to support those priorities, from manual hoists, modular spreader systems and high-capacity hydraulic jacking setups to remote-release hooks, load-stabilization technology and real-time line tension measurement. But all of these products reflect a common direction, encouraging more control with less risk.

All Material Handling

Ongoing supply chain disruptions, along with the discontinuation of several legacy hoist models, have made it harder for distributors and end users to source dependable manual hoists on short notice.

All Material Handling, Inc. (AMH) is positioning two manual hoist lines as readily available alternatives intended to cover a broad range of lifting needs.

The AMH MA Hoist is a premium manual chain hoist available from ½ ton through 30 tons. It uses Grade 80 load chain and is assembled and AMH’s manual chain hoist offerings include the MA Hoist and Badger Hoist (pictured) lines, with capacity ranges designed to support a variety of lifting applications. www.craneandtransportbriefing.com

tested in the U.S., with an emphasis on durability.

Standard lift lengths are available, along with custom configurations for specific job requirements. Key features include a Weston-style mechanical load brake with self-adjusting double pawls, sealed ball bearings on the chain wheel to improve efficiency and serviceability, a double roller guide for consistent load-chain tracking and cast latches. The Badger Hoist line is positioned as a valuefocused option, available in capacities from ½ ton to 10 tons. Badger Hoists use zinc-plated Grade 80 load chain for corrosion resistance and are proof tested prior to shipment.

Buckingham

Buckingham Structural Moving Equipment’s multi-purpose hydraulic jacks, used with the company’s unified jacking machines, are designed for rigging and heavy transport

Buckingham’s hydraulic jacks and unified jacking machines support synchronized multi-point lifting for bridge work, heavy lifts and industrial moves. applications that require high-capacity, multi-point lifting with controlled, synchronized movement. Manufactured in the U.S., the hydraulic jack line is intended to function as part of a unified system for raising, lowering and positioning large loads with a focus on safety and precision.

The multi-purpose jacks are offered in multiple capacity and stroke configurations, giving contractors flexibility to match equipment selection to project-specific requirements related to load, clearance and lift height. When paired with unified jacking machines, each jack is pressurized evenly, helping unify lift points regardless of load distribution. This approach is used to reduce differential movement when lifting large, irregular or sensitive loads.

>24

MARCH 2026 ACT

23

PRODUCT FOCUS RIGGING GEAR ROUNDUP Durabilt Durbin’s DuraTorQ DTQ Series torque-drive load binder is designed for drill-assisted tensioning to reduce manual effort during load securement.

Buckingham’s hightonnage jacks are commonly used on bridge replacements, heavy lifts and industrial equipment moves.

The Caldwell Group

The Caldwell Group’s Dura-Mod Modular Spreader Beam Systems are designed to help rigging shops, crane dealers and rental companies expand lifting options without stocking dozens of complete, fixed-length beams. The concept is simple: users select a system capacity (listed from 6 to 250 metric tons) and then combine end fittings, spreader sections and drop links to assemble a beam configuration that fits the lift. (For reference: 6 to 250 metric tons is approximately 6.6 to 275.6 U.S. tons.)

Because the system is modular, configurations can be built quickly from a smaller set of components, helping reduce downtime and the risk of having the wrong beam on hand. Storage and transport can also be simplified by keeping smaller sections on the shelf and assembling/disassembling on site.

Among the commonly used options is the Dura-Mod Model DM24, a two-point spreader beam system rated for a 24-ton capacity. It can be configured in spreads from 3 to 24 feet. The DM24 assembly is designed around a 17-ton top and 12-ton bottom carbon bolt-type top shackle.

Durabilt Durbin

Durabilt Durbin’s DuraTorQ (DTQ) Series is a torque-drive load binder designed for power-assisted tensioning using a drill, with the goal of reducing physical strain while speeding up securement. The DTQ-12 is listed as compatible with 1/2-inch to 3/8inch chain, and the DTQ-38 is listed as compatible with 3/8-inch to 5/16-inch chain. By shifting tensioning effort from manual force to power-assisted operation, Durabilt positions the DTQ Series as a way to reduce operator fatigue and shorten loading and unloading cycles.

Each DTQ binder is proof-load tested and includes trace codes intended to support product identification and tracking. Durabilt emphasizes consistency and repeatability for crews managing frequent securement cycles.

The DTQ Series includes a 1-inch screw diameter, an 8-inch take-up and a 3:1 design factor. A built-in barrel stop is designed to prevent binder separation, and the “no back-off ” design is intended to help maintain tension under vibration and transit conditions.

Enerpac

Enerpac has announced the new LHS42, a skidding system that is easier and quicker to deploy for skidding loads up to 400 tons. Backwards compatible with the earlier LHSS400 skidding system, the LHS4-2 features a new track coupling system (no tools needed) and longer tracks allowing quicker track assembly.

The Low-Height Skidding System’s modular design comprises a series of skid beams, skid track and hydraulic push-pull units. Loads travel over Caldwell’s Dura-Mod modular spreader beam components can be assembled into a range of beam configurations to match projectspecific rigging needs.

special PTFE-coated pads placed on the skid tracks to reduce friction. The pushpull cylinders are powered by a standard Enerpac split flow pump to ensure each skid beam travels synchronously. It also allows bi-directional operation – avoiding the need to reposition cylinders when switching skidding direction.

The LHS4-2 uses a simple hand twist motion to connect the track together in place of the bolting joint used for the earlier skidding system. While track lengths have increased from 38 inches to 56.4 inches. Both features, taken together, allow the skidding system to be assembled and disassembled more easily and quickly.

Enerpac has developed new skid track handling hooks for a more ergonomic assembly. For ease of transport and storage, the LHS4-2 skidding system is supplied in a steel transport frame.

Engineered Rigging

Engineered Rigging introduced Holmatro Ring Climbing Cylinders to the U.S. market as an option for high-capacity lifting where compact equipment and controlled, incremental lift heights are required. With a retracted height of under 12 inches, the ring climber provides incremental lift heights up to nearly 36 inches, substantially more than many traditional hydraulic cylinders. Made of aluminum and weighing approximately 50 pounds, the system is designed to be portable while still supporting heavy-duty lifting applications.

With a 4.7-inch stroke, each cylinder can lift, lower and mechanically secure a load of 100 tons. Instead of relying on external cribbing built up manually around a traditional jack, the ring climber incorporates aluminum stacking rings as part of the system. As the cylinder extends to the end of its stroke, a technician inserts lightweight stacking rings (about 2.2 pounds each) around the cylinder rod, between the load and the top of the cylinder housing.

The rings are engineered to defined specifications with documented load ratings, and they lock into position to create a stable, predictable load-bearing column. The approach is intended to eliminate time-consuming cribbing stacks

Enerpac LHS4-2 skidding system starter kit.

24 ACT MARCH 2026

www.craneandtransportbriefing.com

>27

MAX110 SD140

MAX510 LD140

HEROES. MADE TO MOVE AMERICA.

MAX110 SD140

CHECK OUT

NOW

MAX510 LD140

MAX Trailer — Home of Road Heroes Introducing two powerful trailers for the U.S. market: MAX110 SD140: A steerable 2+2 axle single drop trailer MAX510 LD140: A 3-axle low deck trailer for higher loads This isn’t just a launch. It’s a calling.

It’s the beginning of something BIG!

(904) 429-2340 | sales@maxtrailer.us | www.maxtrailer.us

Visit us!

Platinum Lot - P7427

Powered by

JOIN A TEAM THAT TREATS YOU RIGHT. We value our drivers and prove it.

Main Terminal: 19285 Old Houston Rd, Conroe, Texas 77302 West Texas Terminal: 8703 W I-H 20 Big Spring, Texas 79720

RANKED ON ACT Transport 50 List & Winner of SC&RA Fleet Safety Zero Accidents, Fleet Safety by Percentage & Driver Safety AFD is a recognized leader in the transportation industry, specializing in (OS/OW) shipments across the United States and globally. We have built our reputation on a foundation of on-time delivery, budget adherence, and unwavering reliability. We commit to providing individualized attention and strategic oversight for every client and shipment. Our service model encompasses full turn-key logistical operations, managing every step from initial pickup to rail transport, strategic storage, and final destination delivery.

SERVICES

Our capabilities are built on specialized equipment and end-to-end logistics management: • Heavy Haul Transportation Management O/D Freight Services - Faymonville DualMAX (up to 42 lines) - Faymonville APM and G modules 24 lines - Tamisko Perimeter 13 axle with 80' of deck - Nelson Super 13 Trunion - Faymonville StreetMAX, MegaMAX, MultiMAX - Faymonville HighwayMAX 1, 2, and 3 • Project Logistics / Full Turn-Key Logistical Operations - Multiple jack and slide options up to 500T / Turntables • Rail Services - Integrated rail spur access at our West Texas Terminal • Warehousing & Yard Management - Secure storage solutions • Support Services - Pilot car and specialized operator services

1-281-651-5462

WWW.AFD-WEB.COM

dispatch@afd-web.com

RIGGING GEAR ROUNDUP PRODUCT FOCUS Greenfield Products’ Roborigger is a remotecontrolled load orientation device that stabilizes and rotates suspended loads without traditional tag lines.

and provide a more repeatable, controlled process for building lift height.

Greenfield Products

Greenfield Products’ Roborigger is a remote-controlled load orientation device designed to stabilize and rotate suspended loads without traditional tag lines. Using gyroscopic rotation technology, the system is intended to reduce the need for workers to stand near swinging or spinning loads – a change that can lower exposure during placement and alignment.

Roborigger is designed to hold and rotate loads with controlled positioning, including in challenging wind conditions.

The system maintains orientation autonomously, helping crane operators place loads more precisely when load shape or jobsite conditions make control difficult.

Greenfield’s lineup is designed to cover a capacity range from 10 tons to 50 tons, operating wirelessly with a stated control range of 350 feet.

Beyond load control, Roborigger also adds a reporting layer through integrated tracking software that logs lift data such as time, weight and location. For companies tracking lift cycles, repeat picks or site productivity, that data can support better visibility into workflow and downtime, and provide documentation that can be useful for planning and accountability.

For operations looking to reduce tag line handling, improve placement

WHEN IT’S HEAVY AND YOU HAVE TO MOVE IT

Holmatro ring climbing cylinders use stacking rings to build lift height and mechanically support the load without traditional cribbing stacks. accuracy and add a data trail to routine lifting tasks, remote load orientation technology like Roborigger reflects a broader push toward keeping crews farther from suspended loads while improving control at the hook, the company said.

LGH

LGH’s Multi-Lug Lifting Beams are designed for crane and rigging work where headroom is limited, loads are complex and lift setups need flexibility without sacrificing control. The beams are intended for applications across construction, millwrighting, energy, manufacturing and specialized transportation, where evolving jobsite

constraints can require fast adjustment of lift points.

Available in capacities ranging from 30 to 100 tons, the beams feature a continuous drilling pattern on both top and bottom flanges. This allows crews to adjust lifting points to better align a load’s center of gravity. The dual-lug configuration supports multiple rigging approaches, from low-headroom single-point lifts to two-leg grabs intended to improve stability and load control. The layout also supports more creative rigging arrangements when required, including scenarios where loads may be shared between cranes due to site constraints or capacity limits.

LGH notes the beam was recognized with a First-Place Gold Award at the 2025 Leadership in Lifting Equipment and Aerial Platforms (LLEAP) Awards. Judges cited the combination of top and bottom lifting lugs and the beam’s broad tonnage range as key differentiators.

>28

CALL TPSE WE HAVE WHAT YOU NEED!

TRANSPORT PRODUCTS AND SERVICE ENTERPRISES, INC.

FOR PRICE, AVAILABILITY, TECH SUPPORT, SPARE PARTS CALL: (321) 631-3802 or e-mail: www.TPSEINC.com www.craneandtransportbriefing.com

MARCH 2026 ACT

27

PRODUCT FOCUS RIGGING GEAR ROUNDUP

Mazzella

Mazzella distributes the Slingmax Helix High-Performance Synthetic Roundsling as an option for tighter rigging applications where a smaller sling profile can make the difference. The Helix roundsling is designed to deliver high capacity with a reduced diameter compared with traditional synthetic slings, helping crews fit synthetic rigging into restricted pick points without defaulting to heavier solutions.

The Helix sling is rated for a vertical capacity up to 200,000 pounds. The core uses K-Spec Core Fiber, described as a durable, high-strength fiber system designed to be lightweight while maintaining lifting performance.

Mazzella notes the material is described as significantly stronger than nylon or polyester fibers, supporting higher capacity in a lighter form factor. The sling also incorporates Rifled Cover Technology, which is designed to improve core-fiber strength (listed at 17 percent) and help the sling achieve a high strengthto-diameter ratio while remaining easier to handle than wire rope. Applications span industries where tight rigging points and high capacity are common, including wind energy and clean energy projects, manufacturing and automotive operations, power generation, construction, marine work and general heavy lifting.

OTH

Falls, slips and trips remain a leading cause of serious injury and fatalities in construction, and load release can be a high-risk moment when crews must climb or access elevated positions to manually unhook rigging. Wireless rigging technology is increasingly being used to reduce that exposure. One example is the Quick-Release LudwigHook, a radiocontrolled hook designed to allow crews to release loads from ground level using a

LGH’s Multi-Lug Lifting Beams feature adjustable lift points on the top and bottom flanges to support many configurations.

RUD’s neXera electric hoist is designed for wind turbine service lifts, with higher lifting speeds and features aimed at repeatable positioning and inspection documentation. two-button remote sequence.

Available in working load limits of 4,400 pounds and 11,600 pounds, the hooks are designed for compatibility with multiple crane types and a range of rigging configurations. The system is designed to release loads in under two seconds, allowing the crane hook to return with the rigging and prepare for the next lift without requiring personnel to access the release point.

Multiple hooks can be synchronized to a single remote, supporting multi-leg lifts.

Operators can release hooks individually using color-coded channels (red, blue, green and yellow) or release all at once, depending on the lift plan and load handling needs.

RUD Group

A radio-controlled quick-release hook allows crews to release loads from ground level, reducing exposure during load unhooking.

28 ACT MARCH 2026

RUD’s neXera is an electric hoist designed for wind turbine service and maintenance cycles, where lifting height and cycle time can directly affect downtime and labor efficiency. RUD lists variable lifting speeds

Rugged Controls’ running line tensiometer and controller provide real-time line tension data and configurable alarms. of 79 to 262 feet/minute for loads up to 1,764 pounds. The company positions the system as faster than conventional hoists for typical service cycles, enabled in part by its patented X-Drive chain drive.

RUD says neXera was developed for lifting applications with heights up to about 656 feet and beyond, reflecting increasing hub heights in the wind sector.

The hoist is designed for use on onshore and offshore turbines. The patented X-Drive chain drive supports chain speeds listed up to 262 feet/minute, which the company says can reduce waiting time during lifting and lowering, shorten service time and lower downtime per turbine. RUD also notes reduced chain wear and a chain pocket wheel design intended to help prevent chain issues such as unclamping or shearing.

Rugged Controls

In crane and rigging operations, real-time load measurement can support both safety and efficiency, especially when conditions change quickly and crews need immediate feedback. Rugged Controls’ Programmable www.craneandtransportbriefing.com

>31

RING CLIMBING CYLINDERS

REN T OR OW N

ENGINEERED RIGGING

Get to Height Faster!

Save man-hours with this innovative incremental lift system. Engineered rings eliminate the guesswork, safety risks and crew strain inherent in crib stacking/unstacking.

Ring climbers deliver precision, power and portability.

Load Capacity: 115-tons per double-acting cylinder Diameter:

7.68”

Height:

11.8” retracted, 35.91” fully extended

Weight:

50 lbs. per cylinder

Stroke:

5.1”

The kit includes 4 cylinders, 24 stacking rings and accessories.

REQUEST A QUOTE ER-AD202602-AD-Cylinders-v5.indd 1

844.474.4448 • sales@engrigging.com • EngineeredRiggingGroup.com

Y O U R

P E O P L E

•

O U R

E Q U I P M E N T 2/10/26 3:53 PM

RIGGING GEAR ROUNDUP PRODUCT FOCUS

interface and a high-visibility display. In combination, the system allows operators to view live load data, track trends over time and respond to changing conditions during a lift.

Slingmax Group

Slingmax Twin-Path synthetic roundslings use a dual-path load-bearing design with protective jackets and inspection features for critical heavy-lift applications.

Controller (RPC-90x-C), paired with a Running Line Tensiometer (RLT), is designed to provide continuous load and tension monitoring on the active line.

The RLT installs directly on the line, with models designed for line diameters from 7/8 inches to 6 inches.

It provides continuous load and tension measurements without requiring changes to the rigging configuration. That data is transmitted to the RPC-90x-C, a programmable controller designed for harsh industrial and marine environments, featuring flexible I/O, an operator-friendly

Slingmax Twin-Path high-performance synthetic roundslings are used in heavy-lift applications across crane and rigging, millwrighting, construction and specialized transportation. Twin-Path slings are positioned as significantly lighter than comparable steel options while still delivering high capacity and improved handling ergonomics.

Each Twin-Path sling is constructed with two independent paths of load-bearing fiber that function together as one sling, providing built-in redundancy. Slingmax notes that each sling uses K-Spec core yarn, a blend of high-performance fibers that the company states has been approved

by DNV and independently tested for durability as a load-bearing core. With a high strength-to-weight ratio and less than 1 percent elongation at rated capacity, the slings are designed to support controlled load handling during critical lifts. n

FULL-SERVICE TURNKEY PROJECTS MADE SIMPLE From engineering to safe execution of professional service — Bay Crane delivers seamless, start-to-finish support for your most demanding projects

CRANES & EQUIPMENT Comprehensive fleet of cranes and auxiliary equipment, tailored to meet the needs of any project or application, ensuring optimal performance and reliability in a wide range of industries.

FULL TURNKEY SOLUTIONS Equipped and Capable to handle any sized project anywhere.

HEAVY TRANSPORT We provide an unlimited range of state-of-the-art trucks & trailers with the latest technology, capable of handling any capacity or type of cargo, ensuring efficient and reliable delivery for both small and large-scale needs.

RIGGING SOLUTIONS Delivering a massive rigging inventory with unlimited range of innovative solutions tailored to meet the unique demands of any work environment, ensuring safety, efficiency, and adaptability across various industries.

www.craneandtransportbriefing.com

MARCH 2026 ACT

31

RECOGNIZED EXCELLENCE IN SPECIALIZED LIFTING • CRANE RENTALS • FORKLIFTS AND MOBILE LIFTS • HYDRAULIC GANTRY SYSTEMS UP TO 900-TON CAPACITY • HYDRA-SLIDE™ SKIDDING SYSTEMS UP TO 1,000-TON CAPACITY • HYDRAULIC PLATFORM TRAILERS

WWW.PSCIND.COM (888) 778-3632

PILOT CARS INDUSTRY SPOTLIGHT

WCS Permits’ Wes Mollno and Valerie Daniel discuss why pilot cars are critical once the load is approved.

S

ecuring permits is often viewed as the finish line in heavy haul planning, but in reality it is only the starting point. Once a route is approved and the paperwork is in hand, the real work begins. Loads must move safely, compliantly and in real time through an unpredictable environment.

That transition, from approval to execution, is where pilot cars play a critical and increasingly complex role.

“A permit defines what can move,” said Wes Mollno, president of WCS Permits & Pilot Cars. “Pilot cars are what make sure it does move safely once the wheels start turning.”

A growing challenge

One of the biggest challenges carriers face today is securing qualified pilot car operators. According to Mollno, the issue stems from inconsistent certification

A permit defines what can move. Pilot cars are what make sure it

From permits to pavement requirements, rising costs and increased liability exposure.

“The role of a pilot or escort vehicle operator is critical to public safety, but the pathway into the profession is not always clear,” said Mollno. “Training and certification requirements vary widely by state, which creates an uneven supply of experienced operators.”

That inconsistency becomes even more problematic on multi-state hauls, where trigger dimensions, equipment requirements and certification rules can change from one border to the next.

At the same time, pilot car services have become significantly more expensive. Costs vary based on load size, route complexity, distance and regional regulations, but the overall trend continues upward as the dimensions of moved commodities increase.

Economical escorting

Rising escort costs have prompted some carriers to consider bringing pilot car services in house.

While the approach can appear economical at first glance, the reality is often more complicated.

“Some carriers do explore self-escorting,”

does move safely once the wheels start turning.

WES MOLLNO, President, WCS Permits

www.craneandtransportbriefing.com

Pilot cars play a critical role in safely escorting oversize loads, managing traffic and supporting compliance once permitted moves are underway.

said Mollno. “But once you factor in specialized training, equipment, insurance and multi-state certification, it is not always practical.”

Regulatory inconsistency is another deterrent. Because escort requirements vary by state, carriers operating their own pilot cars may incur significant mileage in areas where escorts are not required. Combined with increased liability exposure, many carriers ultimately determine that the risks outweigh the perceived cost savings.

Pilot car responsibilities extend well beyond leading or following a load. Their role involves active roadway management, real-time communication and public safety coordination.

“A typical heavy haul may require one to two pilot cars for moderate loads, or three or more for extreme height, width or route complexity,” said Valerie Daniel, national pilot car manager.

Pilot car operators warn the traveling public, communicate hazards and maintain constant contact with the truck driver. They are also responsible for ensuring required equipment, including signs, flags, height poles and radios, is present and functional.

Pre-trip planning is essential. “Every trip should include verifying load dimensions, reviewing permits and routes, checking clearances and accounting for construction zones,” said Daniel.

“Post-trip reviews with the driver are often overlooked, but they are critical for improving future moves.”

>34

MARCH 2026 ACT

33

INDUSTRY SPOTLIGHT PILOT CARS

Operators typically carry commercial auto and general liability insurance. Professional liability coverage is especially important, though it is not always required by law.

Real-world conditions

Even with a permitted route, conditions on the road can change quickly.

Construction activity, weather and traffic behavior all introduce variables that pilot cars must manage as the move unfolds.

“Miscommunication, inconsistent training, equipment failures, route changes and regulatory differences across

Pilot cars are often the first line of defense when conditions change unexpectedly.

VALERIE DANIEL, National Pilot Car Manager, WCS Permits state lines are some of the most common challenges,” said Daniel. “Pilot cars are often the first line of defense when conditions change unexpectedly.”

Given the safety-critical nature of the role, both Mollno and Daniel believe there is a strong case for more consistent pilot car certification. State-level programs

allow requirements to be tailored to local infrastructure, but they also create gaps and inconsistencies for interstate hauls.

Some states do not require pilot car certification at all.

“A national baseline certification, paired with state-specific add-ons, would provide the best balance,” said Mollno.

Approval to arrival

Permits may authorize a move, but pilot cars ensure it happens safely from start to finish. They translate approved routes into real-world execution, navigating traffic, weather and infrastructure challenges mile by mile.

“Compliance does not end when the permit is issued,” Mollno said. “It continues all the way to the destination, and pilot cars are central to making that happen safely.” n

Oversize and superload moves often require multiple pilot cars to support route execution, real-time coordination and public safety throughout the haul.

Your job is already tough.

Find peace of mind with certified rental gear from LGH. Your project’s success depends on conquering challenges. Safety concerns, tight deadlines, availability, budget — the list goes on.

For over 30 years, LGH has provided customers like you with the safest rigging gear rentals and most knowledgeable staff in the industry. Why? Because safety and excellence are our core values. We offer rental solutions at every step of your project.

Experience the LGH difference by scanning the QR code above!

SCAN HERE

34 ACT MARCH 2026

(800) 878-7305

Rentals@RentLGH.com

www.RentLGH.com

www.craneandtransportbriefing.com

Hydraulic Gantry Systems 20 to 1400+ tons Hydraulic Gantry Accessories Mobile Pick & Carry Machines to 110 tons Self-Contained POWERHOSS SPMTs Machinery Moving Dollies Beam Trolleys Powerbars

Tel: +1-815-288-6403

Email: info@rgsinc.net

Web: rgsinc.net

LIFTING MASS & TAKING NAMES

Tel: +1-309-764-9842

Email: info@lift-systems.com

Web: lift-systems.com

SPECIALIZEDLIFTING&RIGGING50

The SLR50 is resilient and robust, showing modest but steady growth in our 2026 top list.

The total workforce count this year is 24,433, an increase of nearly 3,000 employees from 21,449 in 2025.

Heavy lifters F

NUMBER OF DEPOTS 396

NUMBER OF EMPLOYEES 24,433

NUMBER OF GANTRIES (including rubbertired gantries)

1,307

TOTAL FLEET SIZE

2026 2025 NAME OF COMPANY 1 ▲ 6 LGH 2 ▲ 5 EMMERT INTERNATIONAL

NUMBER OF STRAND JACK UNITS 1,354

SPECIALIZED LIFTING UNITS

TOTAL CAPACITY 1,884,058

(other)

10,149

NUMBER OF OTHER SPECIALIZED SPECIALIZED TOTAL LIFTING INDEX LIFTING UNITS FLEET SIZE (US TONS) 2,851 3644 70,000 1,055

1075

82,350

BARNHART CRANE & RIGGING

827

963

306,358

4 ▼1

MAMMOET AMERICAS

305

875

372,800

5 ▼4

BAY CRANE SERVICE

795

802

192,300

6 ▼2

FAGIOLI, INC.

183

798

322,000

7 ▲ 25

INTERNATIONAL INDUSTRIAL CONTRACTING CORPORATION

675

681

9,660

8 ▼7

EDWARDS MOVING & RIGGING

602

626

63,657

9 ▲ 14

RIGGING GEAR SALES

416

532

21,677

10 ▲ 20

OMEGA MORGAN

368

386

12,467

3

* estimated

and Barnhart Crane & Rigging again rank at Number 1, 2 and 3. All three of these companies have huge fleets and operate highly advanced rigging and lifting systems. At Number 4, Bay Crane Companies joined the ACTSPECIALIZEDLIFTING &RIGGING50 for the first time in 2025. Also in 2025,

⊲3

www.craneandtransportbriefing.com

Bragg Companies and Superior Rigging & Erecting joined the list. Both retain their spots at 33 and 40 respectively.

The total workforce count this year is 24,433, an increase of nearly 3,000 employees from 21,449 in 2025. In 2024 the employee count was 20,781, an indication that there’s an increased demand for workers in the construction, energy and heavy transportation sectors.

Fleet additions

Fleet sizes increased in every category this year with 1,307 gantries, including rubber-tired gantries. While strand jack

>38

TOTAL CAPACITIES (2013 - 2026)

1900 1800 1700 1600 1500 1400 1300 1200 1100 1000 900 800 700

2013 939,180 2014 1,024,998 2015 998,234 2016 1,251,422 tons 2017 1,387,649 tons 2018 1,427,872 tons 2019 1,460,697 tons 2020 1,391,662 tons 2021 1,492,564 tons 2022 1,552,909 tons 2023 1,643,070 tons 2024 1,657,902 tons 2025 1,859,035 tons 2026 1,884,058 tons

STATS

or the first time in a few years, the ACTSPECIALIZEDLIFTING &RIGGING50 showed growth in every category, and the index rose as well.

While growth was modest, with the 2026 index at 1,884,058 tons, we see growth from 1,856,949 tons in 2025 and 1,656,082 tons in 2024. In just two years, the index has grown more than 200,000 tons.

This growth can be attributed to two factors. Number one, specialized lifting and rigging companies are adding all types of lifting and rigging solutions to their fleet.

Number two, large-scale infrastructure and industrial projects are requiring advanced specialized equipment that can rig, lift and install ever heavier, taller and awkward equipment, vessels and materials.

Mammoet Americas, Fagioli USA

MARCH 2026 ACT

37

SPECIALIZEDLIFTING&RIGGING50

2025 2024 NAME OF COMPANY 1 ⊲1 MAMMOET AMERICAS

# OF LOCATION DEPOTS USA 29

SCOPE OF OPERATION Worldwide

# OF EMPLOYEES 2,300

SENIOR CONTACT Tomas Villarino, managing director Americas projects

WE ww

2 ⊲2

FAGIOLI, INC.

USA

4

Worldwide

168

Edoardo Ascione, president & CEO

ww

3 ⊲3

BARNHART CRANE & RIGGING

USA

77

National

2,980

David Webster, CEO

ww

4 NEW

BAY CRANE SERVICE

USA

25

National

1,700

Kenneth Bernardo, president & CEO

ww

5 ⊲5

EMMERT INTERNATIONAL

USA

3

Worldwide

100

Terry Emmert, president

ww

6 ▲7

LGH

USA

24

Worldwide

225

Ryan Group, vice president of sales

http

7 ▼6

EDWARDS MOVING & RIGGING

USA

10

Worldwide

140

Jason Edwards, CEO

ww

8 ▲9

OXBO MEGA TRANSPORT SOLUTIONS

USA

2

Worldwide

65

Andy Hulings, COO

ww

9 ▼8

DEEP SOUTH CRANE & RIGGING

USA

8

Worldwide

750

Mitch Landry, president

ww

10 ⊲ 10

BAY LTD.

USA

6

Worldwide

4,800

Berry Peterson, vice president

ww

11 ⊲ 11

ENGINEERED RIGGING

USA

4

Worldwide

35

Christopher Cox, P.E., president

ww

12 ⊲ 12

SARENS USA

USA

6

Worldwide

125

Ronald Rozema, regional director North America

ww

13

ROLL GROUP

USA

7

Worldwide

350

Edward Talbot, managing director, USA

ww

14 ▲ 19

RIGGING GEAR SALES

USA

1

Worldwide

17

Ben Forster, vice president

ww

15 ▼ 14

BELLEMARE TRANSPORT, ENGINEERING & LOGISTICS

Canada

3

National

263

Frank Broisvert, business development manager

ww

16 ▲ 21

BUCKINGHAM HEAVY TRANSPORT (A division of Wolfe House Movers)

USA

4

Regional

95

Mike Brovont, senior sales manager

ww

17 ▼ 15

LAMPSON INTERNATIONAL

USA

7

Worldwide

300

William Lampson, president & CEO

ww

18 ▼ 16

BERARD TRANSPORTATION

USA

4

National

90

Brett Berard, vice president of operations

ww

19 ▼ 17

IRM INDUSTRY MOVERS*

Mexico

2

Worldwide

150

David González, CEO and president

ww

20 ▼ 18

OMEGA MORGAN

USA

13

Worldwide

750

Erik Zander, COO

ww

21

⊲ 13

TAYLOR CRANE & RIGGING

USA

2

National

104

Jim C. Taylor, Jr., founder & president

ww

22 ▲ 24

PSC CRANE & RIGGING

USA

3

National

400

Randy Sever, COO/co-owner

ww

23 ▼ 22

GLOBAL RIGGING & TRANSPORT*

Canada

4

Worldwide

60

Andrew Johnson

ww

24 ▼ 23

PRO-LIFT RIGGING

USA

10

National

411

Travis Black, director of technical sales

ww

25 ⊲ 25

INTERNATIONAL INDUSTRIAL CONTRACTING CORPORATION

USA

4

Worldwide

350

Brian Jardine, president

ww

26 ⊲ 26

RIGGERS GROUP

Mexico

3

Worldwide

60

Hector R. Tores DaVila, vice president

ww

27 ⊲ 27

MEI INDUSTRIAL SOLUTIONS

USA

26

National

2,000

Doug Dayton, CEO

ww

28 ⊲ 28

NORRIS BROTHERS CO.

USA

1

Regional

80

M. Courtney Norris, PE

ww

29 ▲ 30

ADVANCED RIGGING & MACHINERY MOVERS USA

2

Regional

30

Matthew Hinty, president

ww

30 ▼ 29

MAXIM CRANE WORKS

USA

57

National

2,819

Paul McDonnell, CEO

ww

31 ⊲ 31

DORAL EQUIPMENT RENTAL

USA

2

National

25

Rob Keelan, vice president

ww

32 ⊲ 32

ERICKSON'S

USA

4

Regional

60

Steve Erickson, president

ww

33 NEW

BRAGG COMPANIES

USA

15

National

1,400

Logan Dorfmeyer, senior project manager

ww

34

▼ 20

DUFFY CRANE & HAULING

USA

3

Regional

97

Rob Cummings, vice president

ww

35 ⊲ 35

MID-ATLANTIC LIFT SYSTEMS*

USA

1

Worldwide

4

Travis Hall, president

ww

36 ⊲ 36

PROCESS GROUP INC.*

Canada

3

Canada

275

Bryan Snyder, VP construction

ww

37 ⊲ 37

CSE INC.*

USA

5

National

225

Danny Moon, President

ww

38 ⊲ 38

AME INC.

USA

4

Worldwide

220

Ashley Butler, COO

ww

39 ⊲ 39

SOUTHWEST INDUSTRIAL RIGGING

USA

4

National

170

Tate Albrightson, general manager

ww

40 NEW

SUPERIOR RIGGING*

USA

4

Regional

240

Patrick Lewis, CEO/president

ww

⊲ 34

* estimated

38 ACT MARCH 2026

www.craneandtransportbriefing.com

SPECIALIZEDLIFTING&RIGGING50

WEBSITE www.mammoet.com

America

manager

ns

er

# OF # OF # OF OTHER OTHER RUBBER SPECIALIZED STRAND TIRED # OF LIFTING JACK GANTRIES GANTRIES UNITS UNITS 0 20 305 550

TOTAL FLEET SIZE 875

MAKE/MODEL OF LARGEST SPECIALIZED LIFTING UNIT Mega Jacks

CAPACITY OF LARGEST SPECIALIZED SPECIALIZED LIFTING UNIT LIFTING INDEX (U.S. TONS) (U.S. TONS) 5,732 372,800

www.fagioli.com

0

19

183

596

798

Fagioli Self-Propelled Skid System

70,000

322,000

www.barnhartcrane.com

0

99

827

37

963

Barnhart Modular Lift Tower

6,000

306,358

www.baycrane.com

0

6

795

1

802

Enerpac SBL900

992

192,300

www.emmertintl.com

0

16

1,055

4

1,075 Emmert Lift System

3,250

82,350

https://rentlgh.com

51

742

2,851

0

3,644 Enerpac EVO Synchronous Lifting System

4,000

70,000

www.edwardsmoving.com

0

20

602

4

626

1,009

63,657

www.oxboinc.com

1

4

35

20

60

Oxbo Heavy Skid System

17,325

54,875

www.deepsouthcrane.com

1

8

107

13

129

Deep South Specialized Jack System

16,000

50,900

www.bayltd.com

0

2

3

14

19

Dorman Long Strand Synchronized Lift System

15,400

47,250

www.EngineeredRigging.com

0

5

56

17

78

ER Strand Lift System

5,280

41,848

www.sarens.com

0

0

8

25

33

SGC 250

5,000

31,875

www.roll-group.com

0

7

5

3

15

Roll Group Modular Gantry System

4,000

22,000

www.rgsinc.net

0

116

416

0

532

Lift Systems 34PT10060WSIC

1,000

21,677

www.groupebellemare.com

0

1

12

0

13

Hydra Slide HT500

1,000

20,000

www.buckinghamtransport.com

0

2

24

0

26

Unified Hydraulic Jack Machine

12,500

14,200

www.lampsoncrane.com

0

4

8

0

12

E-Z Lift

2,400

13,500

www.berardtrans.com

0

4

9

0

4

Enerpac Syncrolift

5,600

13,000

www.irmindustrial.com

0

3

223

0

226

J&R Engineering /1001-4-34

500

12,700

www.omegamorgan.com

0

17

368

1

386

Heavy Slide System

6,000

12,467

www.taylorcrane.com

0

11

300

0

311

Enerpac EVO Sync Lift System

2,400

12,222

www.pscind.com

0

6

114

0

120

Hydra-Slide JS250 Up N Go

1,000

11,532

www.globalrigging.com

0

0

10

11

21

GRT Containerized Transport

2,400

10,000

www.proliftrigging.com

0

7

67

0

74

Lift Systems 44A Gantry

400

9,722

www.iiccusa.com

0

6

675

0

681

Riggers EZ-Lift 600-33

1,390

9,660

www.riggers.mx

0

3

98

49

150

J&R Engineering Lift N Lock Gantry L1200

600

9,400

www.meiindustrialsolutions.com

1

25

272

0

298

J&R Lift-n-Lock

500

7,491

www.norrisbr.com

0

3

8

0

11

Lift System

800

6,695

www.advanced-rigging.com

2

16

255

0

273

Hydraspec FS404/270

400

6,290

www.maximcrane.com

0

4

22

4

30

Lift Systems 48A

800

6,168

www.doralrental.com

0

1

115

0

116

Enerpac SL125

141

5,263

www.ericksonsgr.com

0

4

15

0

19

Enerpac SBL 1100

1,180

5,000

www.braggcompanies.com

0

5

100

0

105

J&R Engineering Hydraulic Gantry

700

4,500

www.duffycrane.com

3

3

10

5

21

Demag AC-350

400

3,860

www.midatlanticlift.com

0

28

12

0

40

Lift Systems 34PT5400WT

500

2,304

www.processgroup.ca

0

6

6

0

12

Lifting Tower

1,000

2,130

www.cseonline.net

0

1

6

0

7

J&R Engineering Lift & Lock Gantry

900

2,000

www.ameonline.com

0

4

14

0

18

Lift Systems 34PT5400WT

500

1,790

www.swirusa.com

0

4

7

0

11

Lift Systems 850

850

1,332

www.superiorrigging.com

6

10

151

0

167

Lift Systems 400

400

942

Enerpac SBL 900

Editor’s Note: American Cranes & Transport is not responsible for errors or omissions. >40 www.craneandtransportbriefing.com

MARCH 2026 ACT

39

SPECIALIZEDLIFTING&RIGGING50

PHOTO: EDWARDS MOVING AND RIGGING

TOP 10

NUMBER OF GANTRIES

* estimated

2026 NAME OF COMPANY

NUMBER OF GANTRIES

1 LGH

742

2 RIGGING GEAR SALES

116

3 BARNHART CRANE & RIGGING

99

4 MID-ATLANTIC LIFT SYSTEMS*

28

5 MEI RIGGING & CRATING, LLC

25

=6 MAMMOET AMERICAS

20

=6 EDWARDS MOVING & RIGGING

20

7 FAGIOLI, INC.

19

8 OMEGA MORGAN

17

=9 EMMERT INTERNATIONAL

16

=9 ADVANCED RIGGING & MACHINERY MOVERS

16

10 TAYLOR CRANE & RIGGING

11

fleet acquisition didn’t increase much, the “other” specialized lifting equipment category grew exponentially from 10,213 in 2025 to 10,140 in 2026. In 2024, the other category was at 6,869 units. This increase

Specialized lifting fleet sizes increased in every category this year. shows that versatile and adaptive lifting technologies are needed to accommodate evolving lifting and rigging projects.

In summary, the 2026 SLR50 top list reflects healthy growth. The biggest issue with the list is that we didn’t add any new companies this year. We are sure that there are at least 25 companies that should be on this list based on their lifting and rigging fleets. More crane and specialized transportation companies are adding specialized lifting equipment to their fleets to further expand into machinery repair and replacement and other specialized ■ lifting and rigging projects.

Methodology ACT began distributing survey forms for the ACTSPECIALIZEDLIFTING &RIGGING50 list via email in January 2026 and followed up with phone calls and more emails. The companies that completed and returned these surveys over the course of the last two months were included in this year’s list. For some companies we used data from 2025. In these cases, an asterisk appears next to that company’s name as an estimate.

While every effort was made to ensure the accuracy and completeness of this information, ACT, its editors and publishers do not assume responsibility for errors or omissions. We strive to improve this list every year.

2027 toplist To be a part of our 2027 SPECIALIZEDLIFTING &RIGGING50, email the editor, D.Ann Shiffler, to request a survey form. She can be reached at: d.ann.shiffler@khl.com. Or you may email Hannah Sundermeyer at: hannah.sundermeyer@khl.com

J&R ENGINEERING

POWER. PRECISION. Solving the world’s most complex lifting challenges since 1978.

WHAT WE OFFER Gantries / Transporters / Accessories Mini Gantry / Custom / Testing CALL 262-363-9660 VISIT WWW.JRENGCO.COM

40 ACT MARCH 2026

www.craneandtransportbriefing.com

CONEXPO SHOW GUIDE

ACT’s show guide to ConExpo, North America’s construction equipment oasis.

Desert s

H

ere we are, ConExpo Con/ Agg in Las Vegas. For old timers, there’s a sense of déjà vu. For first timers, it’s an unforgettable experience. The skies are filled with colorful booms, forks, buckets, flags, balloons and more. The exhibitors are as ready as they will ever be. New product launches are ready to be unveiled, the machines have been shined to perfection, and it’s time to get this show on the road.

Welcome to ConExpo 2026. Buckle up because the ride is fast, furious and fantastic.

Close to 140,000 people are expected to walk through the gates at this, the largest construction equipment show in North America. More than 2,000 exhibitors will showcase the latest equipment, technologies and services pertinent to the construction industry as a whole, and in our case, specifically to the crane, rigging and specialized transportation sector.

In our February issue, we revealed several product exclusives, including new cranes from Link-Belt, Liebherr, PVE America and Trail King. This show

WHEN: March 3-7, 2026 WHERE: Las Vegas Convention Center

2026 overview map

REGISTRATION: Scan here or visit: conexpoconagg.com/ attend-the-show/ registration-and-pricing © CONEXPO-CON/AGG

guide represents our efforts to feature information about as many companies in our sector as possible. There’s also our Select List of Exhibitors, which features the names and booth numbers of all exhibitors pertinent to our industry sector.

And don’t forget to drop in and see our American Cranes & Transport, International Cranes and Specialized Transport and the greater KHL Group team. We will be at Booth N12525.

CRANES Altec Industries, F44042

One of the biggest utility equipment providers at the show, Altec will exhibit the Altec AC65E-155S, the company’s largest and most capable dual-rated crane, offering both lifting and personnel platform capabilities. The unit features

42 ACT MARCH 2026

www.craneandtransportbriefing.com

SHOW GUIDE CONEXPO

t showdown Altec Industries AC65E-155S

Broderson, F46010

PHOTO: AEM/CONEXPO CON/AGG

Broderson, a subsidiary of the Lanco Group of Companies, will show the new Broderson IC-400 variable outrigger modes. Broderson said they are the first carry deck crane manufacturer to offer this technology.

This system allows operators to maximize the machines’ potential when using mixed outrigger position combinations and get capacities for each of the four zones, making working in tight spaces easier with greater flexibility. And this new technology only requires a software upgrade, so it can be added to existing models. No physical hardware changes are required.

130,000 pounds of maximum lifting capacity with 155 feet of main boom length. It can reach a platform working height of 215 feet when configured as an aerial device with the telescopic jib extended. The machine features 12,500-pounds of hydraulically removable counterweight that is configurable

Jekko USA and Fascan International www.craneandtransportbriefing.com

in 3,000-pound increments. This counterweight optimizes pick capacity and weight while enabling easy, one-man installation and removal from inside the cab. Swing-out-and-down style outriggers allow for the machine to be extremely rigid and provide a solid feel when at the limits of the load chart, Altec said. 22 inches of outrigger penetration, four span charts and Altec’s Smart-Zone Rating system give the crane flexibility during set up.

Fascan International, Jekko USA, F40054

Since its founding in 1992, Fascan International has earned an impressive reputation as the United States’ official importer and distributor of Fassi articulated hydraulic cranes and Jekko mini cranes. Under the leadership of President & CEO Bernie J. Faloney, Jr., the company has grown from a modest Baltimore distribution facility into a 55,000-square-foot hub supporting nearly 7,000 cranes installed across the United States and Caribbean markets. On show will be several new and improved Fassi and Jekko cranes.

Elliott Equipment, S60430

Elliott Equipment Company produces truck-mounted aerial work platforms,

Broderson IC-400 with variable outrigger modes

cranes and digger derricks for the utility industry. Several units will be on show including Elliott’s E160 Transmission Class Aerial, which delivers 1,500 pounds of material handling capacity and 1,200 pounds of personnel capacity, with a combined 2,000-pound rating.

Lampson International, N10346

Lampson International will be showcasing its various products and services, as well as its Millennium Series Crawler Cranes. Specializing in heavy lift services including crawler-mounted, rough terrain, all-terrain and lattice truck cranes as well as the proprietary product, the Lampson Transi-Lift, the company’s fleet is expansive. With weights ranging from 50 to 3,000 tons, and over 500 pieces of equipment, Lampson can meet any lift requirement necessary.

In addition to its heavy lift services,

>45

MARCH 2026 ACT

43

OS offers ity to in-

The heartbeat of the job site

TRT 55 US

TEREX ROUGH TERRAIN CRANES RT CRANES Italy Srl Via Cassoletta, 76 - Fraz. Crespellano 40053 Valsamoggia (BO) Italy Ph: +39 051 6501011 Email: mktg.cranes@terex.com

ROUGH TERRAIN CRANE 55 T CAPACITY

full-color planatory

informamary and mediately e a short

hin easy menu for on crane, tatus.

the main he crane ay. Status platform splay.

l

the butall crane tion – to onal con-

maximizutriggers. acted the available.

www.terex.com/rough-terrain-cranes

Brochure Reference: RT-BR-I-E-TRT 55 US-02/26

CTT 392-16

TRT 55US

CTL 702-32 / 712-45

> 18 USt (16 t) max capacity

> 55 USt (50 t) rated capacity

> 35 - 50 USt (32 - 45 t) max capacity

> 82 - 246 ft (25 - 75 m) min/max jib length

> 123 ft (37,4 m) max main boom length

> 98 - 230 ft (30 - 70 m) min/max jib length

> 322.7 ft (98,35 m) max free-standing height

> 149 ft (45,4 m) max boom lenght with jib

> 2/4 falls or 1/2 falls operation

> T-torque slewing technology

> 8.2 ft (2,5 m) maximun crane width

> T-torque slewing technology

> 4 tower systems option

> Fully proportional boom mode

> Excellence in the sky design

SHOW GUIDE CONEXPO

Liebherr Cranes, F35055 / P7761

Peter, Kate and Bill Lampson Lampson also specializes in heavy haul services to include its exclusive Lampson Crawler Transporters ranging from 400 to 4,000 tons as well hydraulic platform trailers, both self-propelled and towable.

Lampson International also offers specialized engineering and customized rigging services, steel mat rental and load testing services.

Manitowoc Cranes, F39029

With its “big and bold” theme, Manitowoc promises “huge launches” and a major showcase of its industry leading customer support offerings. Range-topping crane introductions from Grove and National Crane will be a focus at the show, alongside new aftermarket products and services to expand Manitowoc’s goal as a total lifecycle lifting solutions company.

Manitowoc said one of North America’s most popular rough-terrain cranes, the Grove GRT780 , will be at the booth.

“Our CRANES+50 strategy guides us as we work to become a full-lifecycle service lifting provider for our customers,” said President and CEO Aaron Ravenscroft.

“Our presence at ConExpo 2026 reflects that commitment. We are showcasing some of the largest mobile cranes at

Liebherr will showcase developments across its full crane portfolio. Exhibits include a worldpremiere all-terrain crane, along with a range of mobile and crawler cranes spanning compact to heavy-duty lifting classes. These machines emphasize optimized transport concepts, advanced assistance systems and efficient setup procedures, the company said. Liebherr will emphasize its advanced assistance systems, transport-optimized designs and digital services that are designed to simplify planning, dispatching and daily operations.

At ConExpo in 2017, Liebherr launched the LTM 1090-4.2, which was marketed as an economical all-terrain crane on four axles. Nine years later, Liebherr is presenting its successor, the LTM 1090-4.3. The 110-ton crane can be driven with many different axle loads on roads and construction sites: 22,050 pounds, 26,450 pounds and 35,275 pounds per axle load. The standard quick-change ballast system makes switching between driving modes quick and easy, Liebherr said. Carrying up to 19,400 pounds of counterweight with an axle load of 26,450 pounds gives value to the crane allowing crane operators to complete crane jobs without transporting additional ballast.

Live demonstrations, a hallmark of the Liebherr booth, will take place several times each day. The demos will center on practical applications of operator assistance systems, digital solutions and alternative drive technologies. Demonstrations include MyLiebherr for fleet and performance Liebherr management and Crane Planner 2.0 for 3D LTM 1055-3.3 lift and site planning.

Manitowoc Grove GMK 5150XL

Link-Belt Cranes, F35029 Link-Belt is set to show several cranes in its product range, but as we reported last month, a highlight of the show is the new TCC-1800, a 180 US-ton telescopic crawler crane designed to bridge the gap between the company’s 140-ton TCC-1400 and its flagship 250-ton TCC2500. The new telecrawler is rated at 180 tons at an 8-foot radius and features a 42.7- to 197.3-foot greaseless six-section pin-and-latch boom.

This crane is Link-Belt’s answer to a fast-growing market segment, telecrawlers in the 150to 200-ton class, where contractors are asking for more reach, more capacity and better jobsite mobility without stepping into a much heavier, harder-to-transport machine, Link-Belt said. The TCC-1800 will make its first public Link-Belt appearance at ConExpo before shipments TCC-1800 begin in the third quarter of 2026.

Link-Belt will also show the new 248|V lattice-boom crawler crane, which is the fifth generation in the 248 family of 200-ton lattice boom crawler cranes. The crane features a new luffing jib that was designed to increase lifting capacity and ease of transport and installation. www.craneandtransportbriefing.com

the show and demonstrating how our partnership helps customers maximize their investments with industry-leading product support.”

One highlight is the new Mobile Training & Technology Center that is making its debut at the show. This industryfirst mobile classroom offers modular, on-site training for customers and North American dealers, advancing workforce development for large crane owners and dealers by streamlining technician upskilling.

Palfinger, F46041

For the first time, Palfinger will highlight all six of its North American product lines, showcasing its full portfolio of lifting solutions, including the Palfinger TEC Series, which includes the new PK 580 TEC and PK 1050 TEC knuckleboom cranes.

The Palfinger TEC cranes offer a range of comfort features and intelligent assistance systems, enabling operators to handle complex lifting tasks with confidence, Palfinger said. All TEC series cranes feature the patented tear-drop P-Profile boom, an industry first that delivers a lighter, more rigid extension system, reducing

>46

MARCH 2026 ACT

45

SELECT EXHIBITORS

CONEXPO SHOW GUIDE EXHIBITOR BOOTH A1A Software F29067 Allison Transmission S80915 Altec Industries F44042 Aluexbeams N12071 AMCS technologies F41011 Arrowhead Winch N12125 Ascorel D1224 Aspen Custom Trailers P7327 Associated Wire Rope & Rigging F27020 Association of Equipment GL20100 Manufacturers (AEM) Autec North America N11055 Auto Crane Company S63159 Behnke Trailers P8132 Bigfoot Construction Equipment F24054 Bigge Crane and Rigging F41020 Bloom Manufacturing N11011 Bridgestone Americas W41633 Brigade Electronics N12945 Broderson (Lanco Group) F46010 Brutus Truck Bodies / Next F19026 Hydraulics Buckingham Structural N11614 Moving Equipment Cargo Equipment N10300 Cattron W42748 Cavotec N10476 CICB N11362 CM Labs Simulations N11839 N11839 Comansa Tower Cranes F42086 Cormach D1153 Cranes 101 N10665 Cranesmart Systems N13250 DanFoss Power Systems F24054 De Haan Special Equipment F41010 DICA F42066 Dinamic Oil North America W44105 DSR International N10232 Elliott Equipment Company S60430 Enerpac F42020 Erkin World Power D1245

PVE American Cranes CC200-1

46 ACT MARCH 2026

Raimondi/Terex, F18012

Palfinger PK 1050 TEC-2 deadweight and improving load stability for operators.

PVE American, D1040

PVE Cranes Group, in partnership with its master distributor Atlantic Coast Cranes & Machinery, will roll out the PVE American CC200 crawler crane.

The new PVE American combines a European crawler platform with Cummins Tier 4F power, Rexroth hydraulics, advanced telematics and self-assembly systems specifically engineered for North American lifting and transport requirements, the company said.

The CC200-1 model was chosen as the introductory model because the 200-ton class is a sweet spot in the market. Other models in the series include the CC601, CC110-1 and CC330-1, representing capacities of 60 tons, 110 tons and 330 tons, respectively. The cranes all have the same design attributes. The CC200-1 features a 246-foot main boom and a 160foot luffing jib for a tip height of 406 feet.

The 330-ton PVE American CC330 can be equipped for wind maintenance jobs with 282-foot main boom and 20-foot heavy duty jib. In this configuration it would be able to pick 88 tons at 28-foot radius.

Sany America, F44054 Sany America will launch two new cranes, the SCA3300A and SCA1100TB. The company said the SCA3300A is a 330-ton crawler crane designed with a strong chart with versatile attachments. The new crane has an updated operator’s cab featuring heated, ventilated seats and electrochromatic glass.

Easy to transport in as few as two loads, the SCA1100TB 110-ton telescopic crawler has a five-section, full power boom which is the longest boom in its class at 174 feet, Sany said. It comes standard

Terex Rough Terrain, now part of the Raimondi Group, is set to present the TRT 55US. The crane is engineered to meet North American operational, regulatory and environmental requirements. This marks the first product debut under the Raimondi North America brand.

Designed and developed in Italy by the Terex Rough Terrain team, the new crane boasts a 55-ton lifting capacity and a maximum jib length of 122.7 feet, supported by three telescoping boom modes for enhanced operational flexibility; the third mode, a distinctive feature of Terex Rough Terrain models, is the Proportional Telescoping Boom mode, designed to simplify operator workflows.

Attendees will also be able to learn more about the tower cranes portfolio, including the launch of new flat-tops and luffing jib cranes.

Terex Raimondi TRT 55US

with 3-position side frames, flat pad tracks, a 20-degree tilt cab and is powered by a Cummins engine.

Terex Franna, SV2357

Franna, the Australian manufacturer of pick and carry cranes, will showcase the AT24 US. Launched to the U.S. market in late 2023, Franna is looking forward to presenting the AT24 US to an even broader audience.

The AT24 US incorporates a suite of technologies designed to protect operators, personnel on the ground and the surrounding environment. The model features Sany SCA3300A www.craneandtransportbriefing.com

>49

The centrepiece of the Çanakkale suspension bridge. s at Visit u O P CONEX 2026 55 #N103

How to bridge two continents overseas with Green Pin® Super Shackles.

Project highlights Used sling shackles (400 t) and Green Pin Super® Shackles (G-5263)

The 1915 Çanakkale Bridge in Istanbul is the world’s longest suspension bridge being 3.7 km long, connecting

Longest suspension bridge in the world

Asia and Europe overseas. Yet, since the rapid growth of the social economy and tourism, the bridge needed an extension. For such a big and important project,

Total length of 3.7 km

Green Pin Super Shackles were selected due to their ®

weight, size, strength, and availability. The centrepiece of rigging in bridging two continents.

Scan the QR code to learn more about this project and product!

The suspension span is 2,023 meters long The bridge is designed to withstand earthquakes

ADVERTORIAL

BIGFOOT: AMERICAN GRIT THAT PERFORMS UNDER PRESSURE F

or more than three decades, Bigfoot has operated as a family run American manufacturer producing American made wood outrigger pads, custom composite outrigger pads, and steel crane mats used across all seven continents.

From the beginning, Bigfoot products were shaped by American Grit, and real world field experience in crane operations, lineman work, and concrete pumping, where STRENGTH, STABILITY, and SAFETY are not optional.

As lifting equipment has grown in size and capacity, dependable ground support has become increasingly critical. Jobsite conditions are rarely ideal. Uneven terrain, changing soil conditions, moisture, and Steel Crane Mats For Cranes 200 to 500 Tons

compaction all affect how loads are transferred into the ground. Because of this variability, reliable ground support depends not only on equipment size, but also on how loads are broadcasted.

Ground bearing capacity refers to the ability of soil to support applied loads without failure and varies significantly based on soil type, moisture content, drainage, and compaction.

In practice, lift planning relies on allowable ground bearing pressure, which applies conservative safety factors to account for uncertainty and dynamic loading. OSHA and ASME guidelines emphasize the use of properly sized, adequately rated outrigger pads and blocking to help support stable equipment setups.

Load spreading systems such as outrigger pads and crane mats do not increase the strength of the ground itself, but instead reduce applied pressure by broadcasting loads over a larger surface area. This helps maintain pressures within allowable limits across a wide range of jobsite conditions.

Bigfoot designs and manufactures ground support products with these realities in mind. Higher load ratings, consistent material performance, and clear engineering standards guide product development so crews can rely on equipment that performs in the conditions they actually face, not ideal scenarios. This approach reflects an understanding of what operators expect from ground support used beneath critical lifts.

Beyond manufacturing, Bigfoot actively participates in industry organizations including NAMA, ASME, and the SC&RA Safety, Education and Training Committee to support education, collaboration, and the development of best practices. This involvement, combined with hands on field experience, informs Bigfoot’s understanding of how varying ground conditions interact with load spreading systems.

At Bigfoot, American grit is engineered into every solution through reliable products, accountability, and respect for the responsibility carried by crews working under pressure every day.

As the company expands its product portfolio and supports new applications, its commitment remains unchanged: deliver dependable ground support solutions that help promote safer, more consistent jobsite performance.

Bigfoot Wooden Outrigger Pads

Come see Bigfoot at the CONEXPO CON/AGG Show in Las Vegas, March 3th to 7th, located at Booth #F24054 in the Festival Lot.

SHOW GUIDE CONEXPO

Tadano, F47010

With its theme “Reaching New Heights,” Tadano will display the breadth of its expanded global portfolio, reflecting its continued evolution into a full-line lifting and access solutions provider.

Tadano will present a more comprehensive offering for North American customers, including former Manitex product lines now fully integrated into the Tadano portfolio – supporting a “one-stop” approach across lifting, access and jobsite solutions.

Innovation will be a central focus, with multiple new and enhanced machines. Among the highlights is the AC 5.250L-2 all terrain crane, featuring a bifold jib designed to increase flexibility and efficiency on site. Tadano will also present advancements such as the removable outrigger box for larger capacity cranes like the AC 6.300-1, reinforcing the company’s emphasis on transport efficiency and jobsite versatility. Additionally, the GTC-600-2 telescopic boom crawler crane will be featured with its strong combination of lifting performance, compact jobsite access and logistical convenience.

Several boom trucks and PM knuckle boom cranes will be featured as a part of Tadano’s expanding lifting solutions lineup. Sustainability, digitalization and customer support will also be key themes. Tadano will spotlight its True Mission Zero Emissions strategy, including its pathway toward reduced and ultimately zero emissions, and its latest digital tools and connected solutions aimed at improving fleet uptime, safety and operational transparency.

Franna AT24 US overload protection, Franna’s proprietary Dynamic Load Moment Indicator, an external emergency stop and an ergonomically designed cabin that supports operator comfort, Franna said.

Precision and control are supported by intelligent functions including automatic counterweight detection, operator‑defined height limits, maximum working radius settings, front axle weight monitoring, rigging limits and real‑time feedback on percentage of rated capacity. These features enable the AT24 US to deliver the consistency and on-site agility expected by contractors and fleet owners, the company said.

TOWER CRANES Comansa, F42086

Comansa introduces its latest innovation, the 6LC85 flat-top tower crane, a versatile and www.craneandtransportbriefing.com

compact model designed for urban and confined workspaces. The 6LC85 offers a maximum load capacity of 11,020 pounds and a reach of 172.2 feet. There are multiple versions available: embedded, supported on bases of 12.5 or 14.8 feet or on top of travelling bases. The crane’s standard mast size of 3.9 feet allows it to fit in small areas. Its modular jib can be configured from 65.6 to 172.2 feet, with increments every 8.2 feet. The crane features a minimum working radius of 5.8 feet and a counterjib radius of just 41 feet.

The 6LC85 is equipped with Comansa’s compact head design, which integrates the slewing and hoist mechanisms, electric control panel and safety limiters into a single unit. Nearly all connections are pre-assembled, reducing installation time.

Compact components simplify transport and handling, reducing on-site logistical challenges and resource requirements.

Components are located within the compact head, allowing for quick inspections and easy maintenance.

Comansa will display its CUBE Cab and components of the 16LC260 12-ton tower >50 crane.

Comansa 6LC85

EXHIBITOR Fascan International Faymonville Felling Trailers Globe Trailers Manufacturing Goldhofer Green Pin/Irizar Forge (Royal Van Beest) Hallite Seals HBC-radiomatic Hendrickson Hetronic Hilman Rollers HookCam Instagrid Intercomp Intercontrol Hermann Kohler Elektrik International Union of Operating Engineers Iowa Mold Tooling Company Inc (IMT) IPS Cranes ITI J.R. Merritt Controls Jaso Tower Cranes Kaufman Trailers KHL Group Kinshofer North America Kito Crosby Kobelco Lampson International

BOOTH F40054 P7427 P8250 P7459 F39020 N10355

Landoll Company Liebherr Link-Belt Cranes Maeda Magna Tyres Manitowoc Michelin North America Miller Lifting Products Murray Trailers NBB Controls Nelson Manufacturing OverWatch Pacific Gulf Wire Rope Palazzani Industrie

P7959 F35055 / P7761 F35029 F42012 W42754 F39029 W42901 N12777 P7267 S83520 F43086 F41001 F50028 D1349

Palfinger North America

F46041

Paus North America

D1249

Pfeifer Wire Rope and Lifting Technology PVE American Ramsey Winch RaycoWylie Ritchie Bros.

Rotzler USA Samson Rope Sany America

N11967

S82619 N12238 S63910 N11027 F45049 D1101 P7233 N12066 N10545 GL50001

SELECT EXHIBITORS CONTINUED

Tadano AC 5.250L-2

N12324 N10909 N10466 S82156 F41002 P8315 N12525 F16027 N11827 F35004 N10346

D1040 S63159 N10762 W41567 N10263 N11462 F44054 MARCH 2026 ACT

49

SELECT EXHIBITORS CONTINUED

CONEXPO SHOW GUIDE EXHIBITOR Scanreco US Service Trucks International Shuttlelift Sigalarm Specialized Heavy Transport Spydercrane Stellar Industries Tadano Talbert Manufacturing Techking Tires Tecno Electtrica Ravasi (TER) Springer Controls Company Tele Radio America Tenstar Simulation Terex Franna Terex Cranes by Raimondi Teufelberger-Redaelli TII Scheuerle TKA Cranes Trail King Industries TVH Parts TW Products TWG (A Dover Company) Venco Venturo Verope USA Vita Industrial Voltek Systems WCS Permits WireCo Witzco Challenger Trailers XCMG (Xuzhuo Construction Machinery Group) Xwatch Yoke Industrial ZF Group Zoomlion

BOOTH W44101 S61147 F42078 N10663 S63115 F40084 S61822 F47010 P8349 N10815 N10348 S63559 W42760 SV2357 F18012 N10252 S63200 D1241 P7445 W41435 N10141 N11727 N12906 N12273 D1109 D1326 N11901 N10519 S63058 F33005 N12545 C23133 S81717 F42027

JASO J1920.DC

Liebherr 125 K

Landoll 850XT

JASO, F41002

A global frontrunner in design and manufacturer of tower cranes, personnel and material lifts and overhead cranes, JASO is a family-owned company based in the Basque Country, Spain. Today the company has a significant global footprint, reaching over 70 countries. JASO will be showing the J1920.DC derrick crane.

Liebherr, F35055/P7761

Liebherr tower cranes will highlight solutions designed for high-density urban construction and large infrastructure projects.

This includes the Liebherr 91 K selferecting tower crane from the new K series, which will be showcased with

intelligent assistance systems that enhance precision, efficiency and safety in material handling, Liebherr said.

TRAILERS & TRANSPORT Faymonville, P7427

The Faymonville Group is excited about the big U.S. premiere of the MAX Trailer, which is presenting its first U.S. vehicles in the form of the MAX110 SD140 and MAX510 LD140 models. Also new is an electronically controlled, self-propelled MSPE that the company said stands out in the Cometto range of products.

Landoll Corporation, P7959 Landoll Corporation will debut the 850XT Extendable Detachable Trailer, engineered to simplify heavy hauling, increase operator safety and provide

Faymonville MAX Trailer

Goldhofer, 39020 Goldhofer is looking forward to direct exchange with customers and showing new products, including the PST/SL-E split with widening system. With an axle load of 99,000 pounds and a variable width from 10 feet to 17 feet, optionally even up to 22 feet, it offers a flexible solution for transporting high loads, Goldhofer said. This concept is complemented by the new E-PowerPack, which has a rated output of 250 kW (around 340 HP). The revised operating concept – including a new remote control, an ultra-bright LED display and an integrated inclinometer – enable

50 ACT MARCH 2026

maximum precision and show how customer feedback is incorporated into product development.

Another highlight for the heavy haul industry is the Goldhofer PST/ES-E (315). With axle Goldhofer PST/ES-E

loads of up to 132,300 pounds on air-inflated tires and without TPMS, even the heaviest loads can be moved with significantly fewer axle lines without any mileage restrictions.

The 8-foot-wide heavy-duty module can also be transported economically in flat racks.

Designed specifically for the U.S. market, Goldhofer is also showing the THP/DC, which has the ability to quickly adjust the vehicle width between 14 feet and 20 feet.

Also on show is the STZ-H 6, which has been one of the most reliable semi low loaders in the American market, Goldhofer said. It can be adapted to various cargo requirements thanks to its telescopic functionality. www.craneandtransportbriefing.com

>53

Atlantic Coast Cranes & Machinery, Inc. Waldo (Wally) Jones, Jr. / Phin Generelly 10429 Success Street, Ashland, Virginia 23005 Office: (804) 798-8840 | Cell: (804) 874-2412 | Fax: (804) 798-9505 Email: wally@accranes.com | phin@accranes.com

Atlantic Co

Introducing All New New Line Crawler Introducing All lineof of Cranes for North Crawler Cranes for America!

North

America!

AMERICAN PVE/American CC 90

ACC]

See the CC200-1 at ConExpo in Las Vegas on March 3-7, 2026 at PVE American lineD-1040. the Diamond lot, Booth Don't miss it!

PVE/American CC 110

PVE/American CC 200

PVE American Line Las Vegas Show Machine

CC100-1 100 ton 100 us tons 150’ Tubular Boom Runner Jib Cummins Diesel Engine 3-sheave Hook Block Model cc 90 Ball Hook 13.5 tons Freefall Capacity 90 tons Winches Main Boom Self-erecting 190 ft Counterweight System

Fixed Jib Luffing jib Winches SLP Winch speed Engine 4F Cummins CW upper

59 ft NA

CC110-1 110 ton

CC200-1 200 ton

110 us tons 150’ Tubular Boom Runner Jib Cummins Diesel Engine 3-sheave Hook Block Model Ball Hook 20 tons Freefall Winches Capacity Self-erecting Main Svstem Boom Counterweight Jack up Cylinders w/ Fixed Jib and Self-erecting Track Boom system Luffing jib

200 us tons 187’ Tubular Boom Runner Jib Cummins Diesel Engine 3-sheave Hook Block ccHook 110 Ball 20 tons Freefall Winches 110 tons Self-erecting 190 ft System Counterweight Jack up Cylinders w/ 59 ftTrack and Self-erecting Boom system 118 ft

16.534 lb 360 ft/min 243kW 52.910 lb

Winches SLP Winch speed Engine 4F Cummins CW upper

17.636 lb 344 ft/min 243kW 60.630 lb

CC330-1 330 ton 330 us tons 240’ Tubular Boom Runner Jib Cummins Diesel Engine 5-sheave Hook Block Model Ball Hook 22 tons Freefall Winches Capacity Self-erecting Main Boom Counterweight System Jack up Cylinders w/ Fixed Jib Self-erecting Track and BoomSystem Luffing jib

Winches SLP Winch speed Engine 4F Cummins CW upper

cc 200 200 tons 246 ft 101 ft 160 ft 27.558 ft 394 ft/min 243kW 145.500 lb

Maximize Storage & Ensure Safety, with Travelift The world’s most popular rubber-tired gantry crane, with custom specifications and capacities from 30-300 tons.

800-664-5225 / 708-596-5200 mi-jack.com

SHOW GUIDE CONEXPO

Trail King Industries, P7445

Scheuerle SPMT ePPU fleet reliability, the company said. Built with Landoll’s proven engineering and customer-driven design philosophy, the 850XT is the most versatile extendable detach trailer Landoll has ever produced, Landoll said. The 850XT was designed to help operators haul more efficiently while spending less time worrying about equipment performance.

The 850XT is available in 48- and 53-foot configurations, featuring an extendable lower deck with four locking positions (closed, 2.5 feet, 5 feet and 8 feet) that quickly adapts to changing load requirements. This flexibility allows operators to handle oversized and heavy equipment without the delays and complications of switching trailers, reducing downtime and increasing productivity. The trailer’s low load angle and trunnion-style structure make loading low-clearance equipment, such as buses, – RVs, fire trucks, excavators and specialized machinery – safer and easier.

TII Scheuerle, S63200

North America has been an important market for TII Scheuerle for many years, working closely with such partners as TPSE and RGS. ConExpo provides the ideal environment to strengthen these relationships and to initiate new projects.

One of the central topics of discussion in the specialized transport realm is the development of efficient and futureready drive concepts. With the electronic Power Pack Unit (ePPU), TII Scheuerle has already introduced a solution that WCS Permits & Pilot Cars team

www.craneandtransportbriefing.com

Trail King will show the TK110HD-S, TK160HDG-S and TK130HES-S, the company’s newly unveiled automatic kingpin steering trailers. Trail King said these trailers represent a shift in heavy-haul equipment design. Trail King collaborated with the heavy haul community on these trailers, gathering real-world insights about tight jobsites, restrictive routes and the pressure to move bigger loads more efficiently. The trailers feature a 9-foot-wide, 53-foot-long frame and a three-axle configuration, with the option of a removable fourth steering axle for added flexibility. The kingpin steering system delivers 40 degrees of steering angle.

The TK110HD-S is available with an extendable deck, along with multiple deck styles and lengths to suit a wide range of hauling applications. Customizable axle configurations further allow operators to tailor the trailer to their specific needs.

The TK160HDG-S closely mirrors Trail King’s traditional 13-axle configuration, consisting of a jeep, trailer and booster—while incorporating kingpin steering on the trailer. The unit features a 108-inch overall width, multiple deck styles and deck heights.

The TK130HES-S is an extendable-deck, fixed hydraulic gooseneck trailer equipped with six steerable axles. It also features a 108-inch width and a loaded deck height of 38 inches. The trailer is designed with an extendable mono-beam deck which provides flexibility in kingpin-toaxle group spacing. The trailer can also accommodate both jeep and booster configurations.

Trail King Industries TK160HDG-S enables emission-free operation for specific transport tasks. The ePPU is designed to support operators in reducing local emissions, particularly in sensitive environments such as industrial facilities, ports or inner-city construction sites.

In parallel, modular vehicle concepts remain a cornerstone of TII Scheuerle’s approach. Modular systems allow transport solutions to be precisely tailored to project-specific requirements, whether in infrastructure projects, energy, shipyards or highly specialized applications. SPMTs will be a focal point for TII Scheuerle.

Arrowhead Winch TR25

RIGGING GEAR Arrowhead Winch, N12125

Arrowhead Winch will show the TR25 and TR35 hydraulic planetary winches, expanding the trusted TR Series with two new models engineered for the demanding needs of trailer manufacturers, towing and recovery fleets, utility operations, forestry equipment and more.

The TR Series delivers fast line speeds, high efficiency, and continuous-duty performance, the company said. A compact, low-profile housing allows each model to fit into tight installation envelopes, while the 18-inch mounting bolt pattern ensures the TR25 and TR35 serve as direct replacements for existing hydraulic winches.

WCS Permits & Pilot Cars, N N11901

Associated Wire Rope & Rigging, F27020

To learn more about oversize/overweight load permits, pilot cars, route surveys and top-notch truck safety equipment, make WCS Permits and Pilot Cars a priority visit. WCS will also showcase some of their industry-leading tools, helping carriers transport some of their most complex projects with more ease.

AWRR RopeBlock products

Incorporated in 1994, Associated Wire Rope & Rigging is a broker for

MARCH 2026 ACT

>54

53

CONEXPO SHOW GUIDE

products in the rigging and lifting industry. The company has established strong working relationships with suppliers/manufacturers across the industry. Product lines represented include RopeBlock, which is a Dutch manufacturer of crane blocks, overhaul balls, snatch blocks, hooks and sockets to name a few. RopeBlock currently OEM blocks and overhaul balls and sockets to such global crane manufacturers as Terex, Manitowoc/Grove, Link-Belt, Kobelco, Liebherr plus many specialty crane manufacturers in the oil and gas exploration industry.

Enerpac, F42020

A global market leader in high pressure hydraulics, Enerpac will show a range of new lifting systems, battery-operated pumps and tools and smart transportation solutions.

Making their first appearance at a ConExpo are the 600-ton capacity Enerpac SBL600

54 ACT MARCH 2026

hydraulic gantry and a 60-ton capacity DTA by Enerpac automated guided vehicle (AGV) Smart Transporter. The Enerpac booth will also feature an Enerpac JS-250 jack-up system for lifts up to 1,000 tons. Strand jacks typically used for bridge launching and a 12-point, Enerpac EVO Synchronous Lifting System used for monitoring, lifting, lowering and weighing of non-uniform distributed heavy loads will also be shown.

Bigfoot Construction Equipment, F24054

Bigfoot Construction Equipment is showcasing a lineup of its signature 100 percent American-made outrigger pads, steel crane mats and ground support Solutions. Along with its classic product line, Bigfoot will be unveiling new products that broaden the scope of its current applications.

As the only manufacturer of wood and custom composite outrigger pads and steel Bigfoot crane mats

Enerpac SBL500 gantry crane mats, Bigfoot builds equipment that prioritizes durability, efficiency and realworld usability.

Bigfoot’s expanded product portfolio will be on display, including its ground mats, rigging racks, rigging gear, cribbing and custom solutions.

Danfoss Power Systems, F24054

Danfoss Power Solutions will exhibit key solutions in mobile and industrial hydraulics, eHydraulics, electrification, digitalization, autonomy and software.

Danfoss will debut its BMV Integrated Drive Motor, FC619C Corrugated Suction

www.craneandtransportbriefing.com

>57

REMOVE THE

FOG OF OPERATIONS

SHOW GUIDE CONEXPO

Danfoss PVG 48 valve Hose, ICMB Industrial Cam Lobe Motor, and additions to the PVG Valve family.

DICA, F42066

DICA is expanding its product portfolio with the introduction of its own product line of ground protection and site access mats.

Making their debut are the new Ranger HD, Defender and Titan crane and construction mats that provide contractors with highperformance and cost-effective access options for a variety of demanding jobsites.

Rotzler Group, N10263

Rotzler Group will introduce the new TITAN TI 3 EVO, a high-performance hydraulic hoisting winch engineered for

Green Pin/Irizar Forge (Royal Van Beest) N10355

demanding lifting applications where flexibility, safety and compact design are essential, the company said.

Designed for hoisting applications across knuckle boom cranes, service cranes, telescopic cranes, crawler cranes, mini cranes, aerial platforms and drilling rigs, the TITAN TI 3 EVO delivers a maximum hoisting force of 10,000 lbf, making it suitable for heavy-duty and precision lifting tasks.

Shuttlelift

Shuttlelift’s rubber-tired mobile gantry cranes and customized spreaders are for long-term, heavy-duty cycle use. The

>58

DICA Ranger HD

Rotzler Group Tarvos TA 25

Green Pin/Irizar Forge (Royal Van Beest) will present the IFNA Hook, which is tailored for North American market. The IFNA Hook brings together Irizar Forge’s century long forging expertise with a geometry engineered for seamless compatibility with local equipment and standards.

Traditional DIN‑designed hooks, though widely used internationally, often mismatch with North American rigging tools and below‑the‑hook devices, reducing efficiency or requiring additional adaptors. The IFNA Hook has been engineered to solve this challenge. Its design ensures seamless integration with the full variety of equipment used across cranes and industrial sectors in North America. Built with exceptional strength, high mechanical performance and remarkable robustness, it offers users a reliable solution for demanding lifting operations.

The current IFNA product range covers capacities from 1.35 tons up to 67.5 tons, with larger sizes already in development.

ACT MARCH 2026 - Tele Radio US - Half page.pdf 6 10/02/2026 17:11:26

BOOTH S63559 DISCOUNTS ON ADMISSION AVAILABLE WITH OUR CODE TEL5976C AT CONEXPOCONAGG.COM

C

M

Y

CM

MY

CY

CMY

K

www.teleradio.com/us www.craneandtransportbriefing.com

usa@teleradio.com

+1 305 459 0763 MARCH 2026 ACT

57

CONEXPO SHOW GUIDE

HBC-radiomatic, N12238 HBC-radiomatic will show several of its radio solutions including the HBC repeater and the Spectrum Series.

The HBC repeater extends the radio link, ensuring optimized range and high availability of the radio control system. Offering simple and flexible integration with a variety of radio systems, and with battery-powered option, the HBC repeater can be used for almost any application as the ultimate solution for uninterrupted productivity.

HBC-radiomatic Spectrum series

Shuttlelift DB Series Shuttlelift team works in partnership with its customers throughout their machine’s many years of reliable service. The arsenal of Shuttlelift’s rubber-tired industrial cranes includes the highly mobile SB Series, the value-powerhouse DB Series, and its SL Series overhead cranes.

WireCo, N10519

WireCo will highlight its latest crane rope technologies designed to support the increasing load demands, higher duty cycles and evolving performance expectations seen across today’s lifting operations.

WireCo’s focus at the show will be on how rope design, construction and material selection can help address challenges such as rotation control, spooling behavior, wear resistance and long-term reliability across a wide range of crane applications. The company will present a selection of crane rope solutions manufactured in the U.S. under its CASAR and OLIVEIRA brands. Featured solutions will include CASAR Lazerlift, a rotationresistant hoist rope developed for large telescopic, crawler and high-capacity tower cranes; CASAR Boomfit, designed as an adjustment rope in boom hoist applications with multi-layer spooling conditions and OLIVEIRA Durascend, a compacted rope solution intended for small to mid-capacity cranes.

TECHNOLOGY A1A Software, F29067

A1A Software will debut its iFleetTrax, an all-in-one business management tool built for mixed fleets. The A1A team will demonstrate how iFleetTrax can streamline mixed fleet operations with

58 ACT MARCH 2026

A1A Software iFleetTrax accounting and full-sync QuickBook integration; enhanced user permission controls; online document management; mixed fleet dispatch and maintenance; reporting and fleet management tools; as well as telematics, GPS reporting and dash cam technology. It also features sales management tools.

The A1A Product Suite is a collection of app-based tools designed for flexibility and performance. The suite includes 3D Lift Plan, (A1A’s legacy program), Sketch Pad, Jobsite Designer, Rigging Designer and 3D Lift Vision. Each application works

independently or as part of a fully connected ecosystem and no web browser is required.

3D Lift Plan, Sketch Pad, Rigging Designer and Jobsite Designer have all been upgraded and will be demonstrated by A1A’s software staff. The A1A Product Suite will include the following apps. All apps will be available through Microsoft, Google Play or the Apple App Store or the A1A Software website.

Tele Radio America, S63559

Tele Radio will show its line of radio remote controls that are widely used in cranes and lifting equipment. As construction equipment evolves toward greater efficiency and operator safety, Tele Radio is expanding its support for OEMs and integrators, while strengthening local stock availability and technical resources in the U.S.

Intercomp, N12066 Intercomp manufactures portable and inIntercomp ground weighing solutions. From complete LS-WIM wireless communication between scales, In-Ground remote devices and software, to industryWeight in leading battery life, Intercomp offers a Motion comprehensive range of products to fit any Scale weighing application, the company said. system Among Intercomp’s advanced solutions, the LS-WIM In-Ground Weigh-In-Motion Scale Systems are an ideal alternative to older static truck scales that require drivers to stop on the scales to manually receive a weight. LS-WIM systems provide individual axle and total gross weights. The LS-WIM collects axle weights, group weights, gross vehicle weight and axle spacing data for a full vehicle weight profile. www.craneandtransportbriefing.com

>61

ai167542310538_200x273-revista-american-cranes-J380pa-alta.pdf ai171103348819_200x273-catme-singapur-2024.pdf 1 21/3/24 16:04 1 3/2/23

12:18

JOIN US AT

THE NEXT GENERATION IN HEAVY LIFT TOWER CRANE SOLUTIONS

BOOTH F41002 March 3-17, 2026 Las Vegas, NV

C

M

Y

CM

MY

CY

CMY

K

J1400 J380PA Max. Load: 64t

LEADERS IN LUFFING CRANE SOLUTIONS

JASO TOWER CRANES

Ctra. Madrid-Irún, Km 415 20213 Idiazabal (Gipuzkoa) • Spain JASO943 TOWER CRANES T. (+34) 187 000 Ctra. Madrid-Irún, Km 415 • 20213 Idiazabal (Gipuzkoa) • Spain E. jaso@jaso.com www.jaso.com T. (+34) 943 187 000 • E. jaso@jaso.com • www.jaso.comWe build the cranes that build the world.

North America

We build the cranes that build the world.

Subscribe Subscribe

Jaso Advert.indd 1

10/02/2026 15:29:26

SHOW GUIDE CONEXPO

AMCS Technologies, F41011 AMCS Technologies is a specialist in anticollision and zoning solutions, developing systems compatible with all brands of cranes and lifting equipment. Core solutions include the DCS 61-S, an advanced anticollision and zoning system for tower cranes; the DCS 61-M, an anti-collision system managing interactions between tower cranes and mobile or crawler cranes using GNSS positioning and the DCS 61PB, an anti-collision solution dedicated to concrete placing booms and gantry cranes, enabling safe coexistence with tower cranes through 3D interference management.

AMCS Technologies also offers IoT Lifting, a web and mobile platform allowing contractors and site managers to remotely monitor crane activity, system status, wind data and productivity indicators.

Job site supervision is reinforced by SUP 61, a centralized supervision system providing real-time visualization, data logging and remote diagnostics of all equipped cranes on a site. AMCS also produces CAM 61, a high-definition camera system designed for crane environments.

The ANEM 200 monitors wind speeds with alarms, data logging and external displays.

AMCS Technologies DCS 61-M

WIKA, N11063

WIKA Mobile Control will introduce the CTL-S700 series controller. With an IP6K9K rating, these controllers are designed to endure harsh environments, offering superior shock and EMC resistance. The CTL-S700 is a TÜV Rheinland certified universal controller for mobile machine applications.

Available in two WIKA CTL-S700 Tele Radio VERSATEQ

Scanreco, W44101 Scanreco will introduce three new remote-control systems – Mega Flex, OneGrip and Rocket Plus. Each transmitter is engineered and built on Scanreco’s G6 platform to address unique operational requirements, providing machine builders with advanced safety, cyber-security and Scanreco compliance features. The new product lineup reflects Scanreco’s commitment controller to platform-based modularity, operational flexibility and export-ready design.

These innovations are tailored to help OEMs and machine manufacturers respond to evolving regulations and expanding market opportunities.

Scanreco is also offering their insights into HMI design and operator productivity. Their specialists help machine builders optimize human-machine interfaces for reduced fatigue, enhanced situational awareness and safer operations in demanding environments. housing versions, the CTL-S700 series offers a range of PLd and SIL2 controllers with CODESYS 3.5 SIL2 compound runtime. These controllers provide flexibility with up to 64 multi-purpose inputs and 58 multi-purpose outputs for both safety and non-safety applications.

With 4 CAN interfaces and 2 Ethernet interfaces, the CTL-S700 series ensures seamless communication, WIKA said.

EDUCATION & SAFETY TRAINING CICB, N11362

Experience real-world crane and rigging training at the CICB booth, which will feature hands-on rigging demonstrations.

Get a front-row seat to proper hitch configurations, load control, equipment inspection and safe lifting techniques using actual rigging gear. CICB experts will break down best practices, highlight common field mistakes and show proven methods that can be taken straight back to the jobsite.

ITI, N10466

Industrial Training International (ITI), an Interplay Learning company, will showcase a suite of new training solutions, highlighting how modern, skills-based training enables safer performance in high-risk environments, reducing operational risk for contractors and their teams.

ITI will debut updates to its VR Crane Simulator, which include expanded training scenarios. ITI will introduce a Magnetek brand XLTX Bellybox Transmitter developed in partnership with Columbus McKinnon.

CM Labs Simulations, N11839

CM Labs Simulations will demonstrate how simulation-based training is helping www.craneandtransportbriefing.com

CM Labs Simulations crane and rigging teams train smarter, close skills gaps and address pressing labor shortages. CM Labs will introduce a set of new features within the Intellia Training System, designed to enhance instructor oversight and training efficiency. The company said simulation technology training is entering a new era, pushing boundaries behind the scenes. n

CCO ConExpo change-up NCCCO will be hosting two events at ConExpo, Green Sticker by CraneSafe and CCO Initiatives and CertConnect.

CraneSafe will be held from 1 to 3 p.m.

(PST) on March 3, in the South Hall, Level 2, Room S226. CCO CEO Thom Sicklesteel said Green Sticker by CraneSafe is the gold standard of periodic inspections and the first of its kind.

CCO has new certification programs and initiatives that they will announce at their second public event.

CCO Initiatives & CertConnect will be held from 1 to 3 p.m. March 4, also at the South Hall, Level 2, Room S226.

CertConnect is a new tool that gives organizations the ability to monitor certification status in real-time, stay compliant, receive important alerts and more, CCO said.

MARCH 2026 ACT

61

BUSINESS AND FINANCE

Private party sales P

rivate party sales – end-user sales, user-to-user sales, or whatever you want to call them – are an increasingly common way of purchasing equipment in the crane and heavy lift industry. At Harry Fry & Associates, we’ve averaged about a 40/60 split financing new versus used equipment over the past few years. Many of those used cranes were purchased through private-party transactions. For a private-party transaction, there is a process customers should follow whether financing or paying cash. The process can be cumbersome, but with fraud on the rise, it helps protect all parties.

Why the increase in private party sales?

Historically, many used crane sales have been private-party transactions. The COVID pandemic significantly reduced manufacturing output. As post-COVID production began to ramp back up, tariffs implemented during the Trump Administration added additional pressure.

This also decreased manufacturing and reduced the importation of new equipment.

With decreased dealer and manufacturer inventory, buyers are searching for equipment wherever they can find it. With limited supply and higher market prices, sellers are choosing to sell without the help of dealers or equipment brokers in hopes of retaining more profit on the sale.

Buyer considerations

As a buyer, here are some things to consider when purchasing from a private party. First, buyers may be able to get a slightly better price by purchasing directly from the seller rather than through a dealer or equipment broker. This is no

THE AUTHOR Tonya Fry, (CLFP) vice president for Harry Fry & Associates, has been in the crane and financing industry since 2004. Past chairman of the SC&RA Allied Industries Group, she is a Certified Leasing and Finance Professional. She earned a Bachelor’s Degree in Economics from Stonehill College in 2001. www.craneandtransportbriefing.com

Tonya Fry discusses the good, the bad and how to protect yourself as the buyer in private party purchases.

The title process may take a while, and temporary tags aren’t always issued.

Buyers may have a unit for which the first payment is due before it is put to work. different than purchasing a car or home that is “for sale by owner.”

However, buyers should recognize that dealers, manufacturers and equipment brokers provide valuable services when selling equipment. Dealers are required by law to pass clear title, so they typically handle ordering UCC searches and clearing any liens prior to selling the unit.

In addition, a dealer or equipment broker will typically require the full history of the equipment before putting it up for sale.

Some may already know the equipment because they know the owner, have serviced it, or may have sold it previously.

Dealers may also complete minor repairs prior to a sale.

Second, with limited supply and high-quality equipment being scooped up quickly, buyers may get a lead on a unit before it is ever listed publicly. A buyer may know of a company that is considering selling a unit or may put feelers out to associates in the industry to see if anyone is interested in selling a particular unit. As a result, the buyer may be able to purchase equipment without competing against multiple bidders.

Purchase risks

The largest issue, when purchasing from a private party, is that the buyer has limited recourse when it comes to the equipment and the title. Private parties typically sell equipment “as is,” meaning if there is an issue after the sale, the seller is unlikely to do anything about it. If the issues are serious, an attorney may need to be consulted, which comes with added cost.

When purchasing from a dealer, manufacturer or equipment broker, those entities typically hope for repeat business and want to provide service to the customer. As a result, if there is an issue post-sale, most will want to make it right.

This gives the buyer additional comfort during the purchase, especially when buying from a dealer or manufacturer with a service team. Dealers and manufacturers may also offer warranties to address future issues within a certain time frame. Private parties typically do not provide warranties, unless the unit is lightly used and the manufacturer warranty has not expired.

Another major item buyers need to be aware of is title work. If the seller does not have a lien on the title, the transfer of title should be relatively quick. However, if the seller does have a lien on the equipment, buyers should expect the title transfer to take time – and they may have a unit they cannot put to work right away.

>64

MARCH 2026 ACT

63

BUSINESS AND FINANCE

Once payoff is received, a lender may take up to 10 business days to apply the payoff and release the title. If the seller is in an electronic title state, the lender will send the release to the state, which then prints the paper title and mails it to the owner of record. This can take an additional 10 to 15 business days depending on the state. Some states offer expedited service where the owner can have the title printed as soon as it is released. Once the seller receives the title, it can then be transferred to the new owner. Buyers should keep in mind that the title process may take up to a month, and not every state will issue temporary tags. A buyer may have a unit for which the first payment is due before it can be put to work.

Due diligence checklist

Purchasing from a private party is a viable option, but due diligence should be completed whether the buyer is paying cash or financing the purchase. This may take additional time, but in the long run it can help ensure a successful private-party transaction. The following are tasks that lenders typically complete, but cash buyers should do as well:

INSPECTION. Never purchase sight unseen. Kick the tires, operate the crane and ask for service records. Make sure the unit is as advertised and confirm the unit actually exists. With the increase in fraud and AI, it is easy for someone to advertise equipment they do not have. A lender will typically require a third-party inspection to verify the equipment, including serial numbers and VINs. HOW DO YOU KNOW THE SELLER? Some lenders will ask: How do you know the seller? Are they a competitor or business associate? If not, how did you learn about the sale?

BILL OF SALE SIGNED BY BOTH PARTIES.

Buyer and seller should execute a Bill of Sale listing the full equipment description, including make, model, serial numbers, and VIN. Include additional items in the sale (boom dolly, counterweights, etc.).

IF APPLICABLE, GET A COPY OF THE FRONT AND BACK OF THE TITLE OR MSO. This

document confirms who legally owns the equipment. If the unit is not titled, ask for a copy of the invoice or Bill of Sale from when the seller purchased the equipment this will tell you who legally purchased the unit.

RECEIVE

STORE

UCC LIEN SEARCH. Once legal ownership is verified, run a UCC lien search at the state level on that owner. Lenders require this prior to closing a private party transaction. Cash buyers should do the same. Check for blanket UCC filings or filings specific to the equipment being purchased.

IS THERE A PAYOFF ON THE MACHINE? If so, a lender will require a payoff letter and will wire payoff directly to the lienholder. A cash buyer should follow the same practice to ensure payoff funds reach the lienholder and that the title and security interest are released quickly.

VERIFY WIRE INSTRUCTIONS. Any time funds are sent electronically, contact the receiving party to confirm wire instructions.

In today’s market, private party crane sales can be a smart and efficient way to secure the right equipment – but only if the buyer approaches the transaction with discipline and a clear process. Having both a buyer and seller that are knowledgeable in the process will allow for a smooth transaction. A private party purchase doesn’t have to be risky, but it does require diligence. n

DELIVER

E R !

U HT AT LIG FE GH I H

Calculate costs/fees for handling and storing freight.

Reviews costs/fees for receiving, unloading, storage, and load-out.

Accommodates all methods (i.e. lump sum, item or skid, article weight, time and equipment, indoor and outdoor areas).

Allows for initially free periods of time if applicable.

Date filters allow for calculating daily, weekly, monthly, or any custom ranges.

Calculate future storage costs and fees!

Ready to elevate your warehousing? Contact us today.

832-615-0482 • info@rsdsoftwareinc.com • rsdsoftwareinc.com

64 ACT MARCH 2026

www.craneandtransportbriefing.com

PST/ES-E (315)

UP TO 60 T AXLE LOAD AS STANDARD. The tougher the challenge, the more the electronically-steered PST/ES-E (315) self-propelled transporter shines. At 2,430 mm base width, it’s flat rack compatible and delivers up to 60 ton axle loads – achieved with standard pneumatic tires, no TPMS, polyfill or mileage limitations required. Even compact configurations can handle the heaviest payloads. Goldhofer’s PST/ES-E (315) redefines the benchmarks for performance, flexibility, and cost-effectiveness.

VISIT US AT BOOTH F39020 MARCH 3-7, 2026 IN LAS VEGAS

Get the complete details in our product brochure – download now.

2510-500_021 PST_ES-E 315 Conexpo fuer American Cranes & Transport+++.indd 1

05.02.26 13:41

VISIT US AT: CONEXPO #N10355 & DISCOVER THE NEW IFNA HOOK

PREMIUM CRANE COMPONENTS FOR ONSHORE MARKETS HEAVY DUTY CHALLENGES. FORGED SOLUTIONS.

Irizar Forge specializes in premium heavy-duty forged components for cranes (overhead, gantry, tower, crawler) up to 5000T SWL. Since 1923, industries like steel, mining, nuclear, hydro and construction have trusted our expertly forged hooks and blocks for reliable performance. When the job demands the best, choose Irizar Forge.

irizarforge.com irizar@irizarforge.com +34 943 88 09 36

LIFTING SITE REPORT

Here’s the church, here’s the steeple Budrovich deployed a Liebherr

The Liebherr LTM1130 hoisted a personnel basket for roof inspections on the historic Cathedral Basilica of St. Louis.

LTM 1130 to support steeple inspections at the Cathedral Basilica of St. Louis.

I

n the wake of an EF3 tornado that struck St. Louis, MO in May 2025, Budrovich Contracting was called in to support critical roof repairs at the Cathedral Basilica of St. Louis, a landmark known worldwide for its historic architecture and extensive mosaics.

Budrovich’s involvement centered on assisting a local roofing contractor with repairs to the front steeples of the cathedral. Due to the height and location of the repair areas, operating from a personnel basket was identified as the safest and most efficient approach.

“The contractor determined that working from a personnel basket would be the most efficient option,” said Sam Harper, crane rental sales manager, Budrovich. To safely reach both steeples, Budrovich selected a Liebherr LTM 1130 from its fleet. The crane was set up directly in front of the cathedral, allowing access to both work areas from a single position.

“We look at every project through the same lens when it comes to safety and efficiency,” Harper said. “When you’re hoisting a personnel basket, the awareness is amplified and the rules regarding capacity change compared to lifting inanimate objects.”

With 197 feet of main boom and a 62-foot offsettable swing-away jib, the LTM 1130 provided the reach and capacity needed while maintaining appropriate safety margins.

“It’s become a go-to machine in our fleet because of its reliability and configurable options,” Harper added.

Extensive planning and coordination were required ahead of the lift, particularly due to traffic considerations.

Lindell Boulevard is a major thoroughfare, www.craneandtransportbriefing.com

The basilica features more than 41 million pieces of glass, making it the largest mosaic collection in the world.

and the crane setup required reducing traffic to one lane in each direction.

Comprehensive lift planning

“In addition to the traffic control plan, our team developed a comprehensive lift plan,” said Harper. “We used field measurements, Google Earth and 3D lift planning technology to create an accurate rendering of the hoists before we ever mobilized.”

The detailed planning ensured that both steeples could be accessed safely while minimizing public street disruption.

The Cathedral Basilica of St. Louis carries deep historical and architectural significance, a fact not lost on the project team. Planning for the cathedral began in the late 19th century, though construction was delayed after a devastating tornado impacted the area. The cathedral was completed in 1914 and later designated a basilica by Pope John Paul II in 1997.

Known for its mosaics, the basilica

features more than 41 million glass pieces covering approximately 83,000 square feet, making it the largest mosaic collection in the world.

“There’s an interesting connection between the cathedral’s history and this repair,” Harper noted. “A tornado delayed the original construction, and more than a century later, another tornado led to the repairs we were supporting.”

Weather and traffice control were the biggest challenges. High winds forced the team to postpone the original hoist day, requiring a rapid reschedule.

“Mother Nature shut us down on the originally scheduled hoist day due to higher-than-expected winds,” Managing traffic control equipment safely, particularly when drivers were unfamiliar with rerouting, added a layer of complexity. Despite the challenges, Budrovich successfully adapted to the schedule change and completed the hoists as planned, safely and without incident.

“In the end, everything went smoothly, and we were able to complete the work safely and as intended,” Harper said. n MARCH 2026 ACT

67

COMMENT

www.scranet.org

A structural shift Resetting the broker playing field. Joel Dandrea discusses.

B

eginning in mid-January, the Federal Motor Carrier Safety Administration (FMCSA) now has clear authority to suspend the operating authority of brokers and freight forwarders who fall below the required $75,000 in financial security and fail to restore it within seven days.

The change stems from provisions in the MAP-21 transportation law passed in 2012, but only now is being enforced through FMCSA’s final rule.

For SC&RA members, this is more than a regulatory housekeeping update.

It represents a structural shift in how broker solvency, payment risk and

SC&RA Leadership CHAIRMAN

J Rozum

MSA Delivery Service, Canton, MI

CRANE & RIGGING GROUP CHAIR

Peter Juhren

PRESIDENT

Morrow Equipment Salem, OR

PSC Crane & Rigging, Piqua, OH

TRANSPORTATION GROUP CHAIR

Jim Sever

VICE PRESIDENT

Joanna Jungels

Harry Fry & Associates, West Newbury, MA

Anderson Trucking Service St. Cloud, MN

Harry Fry

TREASURER

SC&R Foundation

Vlaming & Associates, Vallejo, CA

PRESIDENT

Michael Vlaming

ASSISTANT TREASURER

Keith Settle Oxbo Mega Transport Solutions Houston, TX ALLIED INDUSTRIES GROUP CHAIR

Troy Geisler Kalyn Siebert Gatesville, Texas

Kate Landry Deep South Crane & Rigging Baton Rouge, LA VICE PRESIDENT

Tyler Henley

Mazzella Companies Oklahoma City, OK TREASURER

Shelly Gayring Select Crane Sales Fort Pierce, Florida

www.craneandtransportbriefing.com

counterparty credibility should be evaluated before freight ever moves.

At its core, the rule is designed to strengthen confidence that brokers have real, accessible financial backing in place. Only assets that are readily available – such as cash, irrevocable letters of credit from federally insured institutions or U.S. Treasury bonds – can be used to satisfy the $75,000 requirement. This is intended to eliminate arrangements that may look compliant on paper but fail to provide real protection when a claim arises.

FMCSA can now suspend a broker’s operating authority if its financial security drops below the threshold and is not replenished within seven calendar days. That creates a near-immediate compliance trigger rather than a drawnout enforcement process.

The rule also places new responsibilities on sureties and trustees.

If a surety or trustee becomes aware that a broker or freight forwarder is facing financial failure or insolvency, it must notify FMCSA and begin cancellation of the financial responsibility filing.

FMCSA will then publish a notice of failure in the Federal Register. While bankruptcy alone does not automatically constitute insolvency under the rule, financial distress now has clearer regulatory consequences.

In addition, loan and finance companies are no longer eligible to serve as trustees for BMC-85 trust fund filings. This further narrows the field to entities with more direct financial accountability.

Why it matters

This rule gives carriers and specialized transport providers a clearer signal. A suspended broker authority is a visible red flag. It also gives carriers another tool to evaluate financial legitimacy before accepting loads, particularly in volatile markets where new brokers may enter quickly.

At the same time, the rule does not eliminate all broker-related risk.

Financial security is one piece of a larger transparency puzzle. For years,

carriers have raised concerns about access to transaction records and the ability to verify rates, margins and payment practices. While federal rules already require brokers to maintain transaction records and provide parties the right to review them, enforcement and compliance have been inconsistent.

FMCSA proposed updates to broker transparency rules in 2024 and reopened the comment period in early 2025. A second proposal is expected later this year. That process will likely shape how much visibility carriers gain into broker transactions and pricing practices moving forward.

The takeaway is not to assume this rule solves every broker-related issue.

Instead, it should be viewed as a baseline reset. Companies should consider updating internal vetting processes for brokers and freight forwarders, including monitoring FMCSA authority status more actively. Contract language may also warrant review to ensure payment terms, dispute resolution and financial responsibility expectations are clearly defined.

Just as important, project logistics teams should recognize how quickly a broker’s authority can now change. A mid-project suspension could disrupt freight flows, requiring contingency planning and alternate sourcing to keep schedules intact.

Ultimately, the new rule won’t eliminate bad actors overnight, but it raises the bar for participation and gives carriers clearer signals about who is standing on solid financial ground. For SC&RA members, it’s a meaningful step toward a more transparent and accountable marketplace – and another reminder that regulatory details increasingly translate into real operational and financial outcomes. n CHIEF EXECUTIVE OFFICER

Joel Dandrea 5870 Trinity Parkway, Suite 200 Centreville, VA 20120 Ph: 703-698-0291 Fax: 703-698-0297

MARCH 2026 ACT

69

NEWS

www.scranet.org

Evolving priorities, s SC&RA committees are moving beyond reactionary work toward proactive safety and strategic engagement.

A

s regulatory pressure, jobsite complexity and workforce expectations continue to evolve, SC&RA’s committees are increasingly focused on anticipating change rather than reacting to it. Across both the crane and transportation sides of the Association, committee leaders are reassessing priorities, expanding collaboration and sharpening how guidance, education and advocacy are delivered to members.

For Randy Sever, with PSC Crane & Rigging, and chair of the Crane & Rigging Safety Education & Training Committee, mental health is currently at the top of the Committee’s agenda from a safety and workforce perspective.

“It’s front and center,” he emphasized.

“We’ve experienced it recently within our own company – and it impacts not just employees, but extends to family members and beyond.”

Sharpening the focus

That focus was formalized during the Committee’s 2025 strategic planning process, which identified four core objectives: increasing committee engagement, enhancing safety awareness, staying ahead of technology and regulation, and advancing mental health awareness.

On the Committee’s education and training front, Sever pointed to ongoing collaboration between SC&RA and the Commercial Vehicle Safety Alliance (CVSA) as one of the most significant developments underway. “One of the biggest things I’d point to is how SC&RA and CVSA are working together on recommended weighing procedures for mobile cranes,” he said.

A key part of that progress, Sever said, has been the involvement of SC&RA’s transportation expertise. “The

70 ACT MARCH 2026

Cross-committee collaboration remains a priority as SC&RA leaders examine emerging workforce, safety and policy issues.

Permit Policy conversations at recent SC&RA meetings have zeroed in on automation and enforcement considerations affecting specialized transport. fact that the Permit Policy Committee has convened a task force with members from both crane and specialized transport has been critical in our efforts.

The task force’s knowledge and experience working with DOTs from different states, understanding of permitting – is really driving this effort productively forward.”

Additionally, Sever highlighted the Committee’s continued focus on developing practical resources for SC&RA members “These resources are developed by industry professionals with decades of hands-on experience,” he noted, “and reflect real-world processes and procedures used across crane and rigging operations.”

Looking ahead, Sever said the Committee is deliberately changing how it identifies priorities and engages with members. “We’re not only relying on committee members to drive topics, and we’re not sitting back in a reactionary mode waiting for OSHA or other regulatory changes to force our hand,” he said. “We’re seeking Bryce Baker, Oxcart Permit Systems

Randy Sever, PSC Crane & Rigging broader member engagement.

We want members to share what they’re struggling with, what challenges they’re seeing and what may be prevalent in their region – and, in turn, how proactively we should address it.”

Increased emphasis

As projects grow taller, denser and more urban, said JR Moran, with Brasfield & Gorrie, and chair of the Tower Crane Committee, his group is increasingly focused on challenges that sit just outside traditional crane operations but have direct operational impact.

Urbanization continues to drive new legislative and regulatory pressures, Moran said, and at the same time, workforce challenges remain persistent.

“Additionally, economic uncertainty has added another layer of complexity, with fluctuations between commercial and infrastructure work and tariff-related pressures – slowing fleet investment and modernization.” www.craneandtransportbriefing.com

NEWS

www.scranet.org

s, shared focus said the committee is preparing to survey members to better understand what they know and what they want to know relating to tower cranes and wind-related considerations.

Balancing act

SC&RA committees continue refining education and oversight as projects grow taller, denser and more complex.

Those headwinds, he emphasized, may be indirect, but they shape the environment tower crane operators are navigating every day.

“From a safety and planning standpoint, the committee’s work centers on two parallel tracks. One focuses on regulatory engagement at the local and state level, and the other centers on providing practical guidance to the industry.”

On the education side, in 2025, the Committee published the Guide to Tower Crane Procedures, which Moran said is available to the entire industry (and free as a download for SC&RA members) and served as a basis of design for the recently launched CCO assembly and disassembly director certification.

Looking ahead, Moran said the Committee is placing increased emphasis on strategic planning and member engagement. “In June of last year, the group launched a formal strategic planning effort that now guides our work across regulatory and legislative issues, workforce development and collaboration with the SC&RA Foundation,” he said.

As part of that effort, Moran www.craneandtransportbriefing.com

Permit policy continues to be a moving target for Permit Policy Committee chair, Bryce Baker, with Oxcart Permit Systems, LLC. “It requires this committee to constantly evaluate which issues can be addressed quickly and which demand longer-term effort.”

While Baker echoes Sever in recognizing the cross-over work SC&RA is pursuing via size and weight coordination with CVSA, he pointed out that some of the most immediate challenges for his group stem from the unintended consequences of automation.

“While the industry has pushed hard for automated permitting systems, several states are now encountering friction as those systems come online,” he said.

“We’ve seen issues arise in one state with unaccounted-for bridge data, and in another state, automation led to staffing reductions that left agencies without the human capacity needed to resolve problems when they arose.”

Baker said those examples illustrate the balancing act facing permit authorities and carriers alike as automation expands.

Progress is being made, he affirmed, but the transition has not been seamless.

Circling back to collaboration with CVSA, Baker said the Committee’s longerterm work is now focusing particularly on mobile crane enforcement.

“For years, CVSA guidance has treated mobile cranes the same as trucks, without accounting for their unique configurations and operating characteristics. But that’s finally changing – resulting in a draft guidance document now advancing through board processes within both CVSA and SC&RA. Once finalized, the document will clearly outline recommended weighing procedures for mobile cranes.”

Core functions

Dave Merrill, with Pahoa JR Moran, Brasfield & Gorrie

Dave Merrill, Pahoa Express Express, chairs the Transportation Safety Education & Training Committee.

He indicated that many of the most pressing safety and training gaps facing specialized operators today have less to do with missing regulations or equipment and more to do with judgment and execution.

“Too many issues are traced back to overreliance on route verification and GPS, and a limited understanding of how permit conditions actually govern a move. Of course, many SC&RA members manage those challenges well, but the issue remains widespread across the broader industry.”

Currently at the center of a lot of challenges in the space, added Merrill, is a lack of judgment-based training as drivers approach complex sites. “That’s where last-second decisions come into play,” he said, emphasizing the need for more deliberate preparation before those moments occur.

Merrill underscored that education becomes far more effective when it is rooted in real-world experience rather than theory. “Training is far more meaningful when it’s built around actual enforcement encounters, trends and incidents that we all come across,” he said.

Looking ahead, Merrill said some of the most impactful initiatives underway within his committee involve a more proactive, judgment-driven approach to safety.

“Improved use of data and operational feedback is helping companies identify patterns in routing, permitting and last-mile execution before they result in violations or incidents. We’re also putting an emphasis on the importance of elevating dispatch, planning and permitting roles within organizations.

They need to be recognized as core safety functions, not just administrative roles.”

As data tools continue to improve, Merrill said companies will gain a clearer view of where their pain points lie. While technology adoption varies by fleet, he said the broader trend is clear. “Everything is moving toward a more proactive ■ approach and better outcomes.”

MARCH 2026 ACT

71

MOBILE CRANE PRE-JOB MEETING FORM PROVIDES MORE THAN 45 ITEMS THAT SHOULD BE REVIEWED BEFORE BEGINNING ONSITE WORK • 25 forms per pad • plus carbon copy KEEP YOUR CRANES IN TOP WORKING CONDITION

ORDER NOW AT

WWW.SCRANET.ORG/STORE BUY THESE IN BULK!

RISK MANAGEMENT

Chuck Cooke discusses how situational awareness can positively affect crane and rigging operations.

Situational awareness S

ituational awareness in crane and rigging operations is the ability to perceive, understand and anticipate potential hazards in the surrounding environment to prevent accidents, injuries and property damage.

It requires active scanning and constant updates to one’s mental picture of the worksite. Effective situational awareness involves three main aspects: PERCEPTION. Actively monitoring the work area, including the load, the crane’s movement, the surrounding personnel, obstacles, and environmental conditions like wind or rain.

UNDERSTANDING. Interpreting the perceived information to grasp its meaning in the context of the lifting operation. This includes understanding of load dynamics, ground stability, and potential “line of fire” exposures.

PREDICTION/ANTICIPATION. Forecasting what might happen next and preparing to adapt instantly. This allows operators and riggers to make split-second decisions to avoid accidents.

Key practices

Pre-lift planning, pre-lift meetings, JSA’s fully filled out, sit walks and proper crane set up are crucial elements for successfully completing a lift and assuring full situational awareness.

THE AUTHOR Chuck Cooke is vice president of risk management for W.O. Grubb Steel Erection and W.O. Grubb Crane Rental, where he started his career and has worked for 47.5 years in the steel erection, crane rental and rigging industry. He is a 45-year member of IUOE Local 147, graduating the apprenticeship program in 1984 to become a Journeyman crane operator. www.craneandtransportbriefing.com

Several practices and tools boost situational awareness and minimize risk: ■ Pre-lift planning. Conducting a thorough job hazard analysis and lift plan before operations begin. This team-driven exercise ensures everyone understands potential exposures and the controls in place to mitigate risk.

■ Clear communication. Utilizing standardized hand signals (as established in ANSI B30.5 and OSHA 29CFR1926.1419, 1420, 1421,1422.

■ Optimal visibility. Positioning the crane operator to maximize their view of the work area, the load, and the boom. For areas with limited visibility or “blind lifts,” using qualified spotters and qualified signal persons.

■ Team coordination. Fostering collaboration among the entire crane crew (operator, lift director, riggers, signalperson, general contractor and other crafts working on the area) ensures everyone understands their

roles and responsibilities, promoting a unified safety approach.

■ Continuous monitoring. Constantly checking operational safety devices (e.g., load moment indicators), weather conditions, and the stability of the ground or outriggers.

■ Proper training and certification. Ensuring all personnel have the appropriate certifications/qualifications and ongoing training to understand best practices, equipment limitations, and emergency protocols.

By prioritizing situational awareness, crews significantly reduce the risk of accidents and ensure safe, efficient operations. Key challenges include such human factors as: ■ Fatigue and stress. Operators often work long hours in demanding conditions, leading to physical and mental fatigue, which significantly reduces reaction times and concentration. High-stakes situations and the knowledge that mistakes can be catastrophic also create stress, which impairs judgment.

■ Distractions. Internal distractions (like preoccupation or complacency during routine tasks) and external distractions (like personal electronic devices or excessive radio chatter) can cause an operator to lose focus on the immediate environment.

■ Complacency. With experience comes the risk of overconfidence or becoming too comfortable with the routine, leading operators to overlook critical safety checks or potential hazards.

■ Miscommunication. Lack of clear, standardized communication protocols (e.g., using incorrect hand signals or unclear radio instructions) among the operator, riggers, and ground crew can lead to dangerous misunderstandings and accidents.

Environmental and site conditions that must be considered include: ■ Limited visibility and blind spots. The size and structure of the crane itself can create significant blind spots. Fog, rain, snow, nighttime lighting, and the glare of direct sunlight can impair visibility, >74 MARCH 2026 ACT

73

RISK MANAGEMENT

making it difficult for the operator to see the load, ground personnel, or surrounding obstacles.

■ Adverse weather. High winds can cause loads to swing unpredictably and compromise the crane’s stability, requiring operators to constantly monitor wind speed and the limits of the crane. Other weather conditions like heavy rain or icy surfaces also impact ground stability. Heavy snow buildup on boom surfaces can add extra weight to the crane and load and cause overloading. Ice buildup in/on sheaves can cause damage to wire ropes and back lashing of drums.

■ Unstable or uneven ground. Operating on soft, uneven or unsurveyed ground can compromise the crane’s stability, increasing the risk of tipping over.

■ Site congestion and obstacles. Busy construction sites with multiple pieces of equipment, overhead power lines, and changing layouts require constant vigilance to avoid collisions or contact with electrical hazards.

Also, operational challenges must be addressed: ■ Complex loads. Handling dynamic or irregularly shaped loads requires advanced skills and constant attention to maintain balance and control, as the center of gravity can shift unexpectedly.

■ Information overload. Modern crane systems provide a wealth of data (load moment indicators, camera feeds, etc.).

The challenge lies in processing this information effectively in real time without becoming overloaded and missing other critical cues from the environment.

■ Mechanical failures.: Equipment malfunctions due to poor maintenance or lack of inspection can create sudden, unpredictable hazards that require instant identification and decisive action from the operator to manage.

Key safety procedures

Poor situational awareness significantly compromises numerous crane safety procedures, transforming standard operations into high-risk activities.

The failure to perceive, understand and anticipate the working environment leads directly to a breakdown in critical safety protocols. Key crane safety procedures impacted include pre-lift planning and assessment: ■ Site evaluation. Inadequate awareness during planning can lead to failure to identify critical site hazards such as

74 ACT MARCH 2026

Communication breakdowns Communication breakdowns during crane operations are a leading cause of accidents and stem from various sources and often have severe consequences: ■ Misinterpretation of signals. A signalperson might give an action signal, but the operator interprets it incorrectly, perhaps confusing a “hoist” signal with a “lower the boom” signal. This can lead to uncontrolled load movements and collisions.

■ Unseen signals (Line of sight Issues). If the signalperson moves out of the crane operator’s line of sight, the operator has no guidance and must stop operations immediately. A breakdown occurs if the operator attempts to continue the lift without a visual or auditory signal, leading to potential accidents in the blind spot.

■ Radio interference or failure. In noisy environments teams rely on radios. If radio coverage is bad, batteries die or there is interference, operations must cease.

■ Multiple signalpersons. The operator must know who the single designated signalperson is for a given lift to avoid conflicting instructions.

■ Language barriers. On multicultural work sites, language differences can impede clear communication and understanding of instructions and safety protocols.

■ Using non-standard signals. Relying on ad-hoc or “invented” signals instead OSHA/ANSIapproved standardized hand signals can lead to severe misunderstandings.

■ Delayed communication. Can lead to catastrophic events such as boom striking the building, load hitting a person or being dropped.

■ Ignoring a stop signal. Every person on the worksite is authorized to give an “emergency stop” signal. A communication breakdown occurs if the operator is distracted or lacks situational awareness and ignores this critical signal from anyone.

■ Ambiguous instructions. Verbal instructions must be concise. If a ground crewman yells “move it over there” without specifying direction, speed or distance, accidents can occur.

■ Misunderstanding load weight. In a case in Franklin VA, the lift planner miscalculated the load weight by 50,000 pounds. This incorrect information was not caught during the pre-lift communication, leading to the cranes exceeding their capacity and tipping. unstable ground conditions, overhead power lines or underground utilities, increasing the risk of crane overturns or electrocution.

■ Load calculation. Underestimating or misjudging the weight, size, or center of gravity of a load due to poor assessment can result in overloading the crane, leading to structural failure or tipping.

■ Weight language differences. a The short ton, also known as the U.S. ton, is 2,000 pounds. b The long ton, also known as the Imperial (British) ton is 2,240 pounds. c The third ton is the metric tonne which is, equal to 1000 kilograms, or approximately 2,204 pounds d 2.20462 pounds = 1 kilogram e Kilonewton (KP) = 224 pounds f KIP = 1,000 pounds Communication and signaling are also important.

■ Communication protocols. Lack of situational awareness often results in miscommunication or a complete breakdown in communication between the operator, signalperson, and ground crew.

■ Use of standard signals. Failure to stay focused on the signalperson or to use clear, standardized hand signals (as

established in ANSI B30.5 and OSHA 29CFR1926.1419, 1420, 1421,1422.) increases the chance of operational errors.

Operational execution must include: ■ Maintaining clearances. Operators with poor situational awareness may fail to maintain safe minimum clearances from obstacles, other equipment, and power lines, resulting in dangerous collisions or electrical hazards.

■ Securing the load. Inattention during the rigging process can lead to improper attachment of the load, causing it to slip or fall during the lift.

■ Controlling load movement. Without full awareness, operators may make sudden, jerky movements or fail to account for wind, causing the load to swing unpredictably and strike personnel or structures.

■ Pre-operation checks. Complacency driven by poor awareness can lead to skipping or rushing vital daily or preshift inspections of the equipment, allowing potential mechanical failures to go unnoticed until an incident occurs.

And the fourth area that must be considered is personnel safety.

■ “Line of Fire” avoidance. A lack of >77 awareness means personnel might www.craneandtransportbriefing.com

2026 Annual Conference

April 20-24 Where Colleagues and Competitors Collaborate.

• Build relationships with existing clients

• Find new prospects at the Exhibit Center with 90+ booths • Learn from experts on new trends and the economy

Omni Amelia Island Amelia Island Florida

• Network at receptions every night

Register today at scranet.org/AC2026

RISK MANAGEMENT

inadvertently place themselves in the path of the swinging load or underneath the crane while it is in operation, a situation that should never occur.

■ Response to emergencies. In critical situations, poor situational awareness can lead to delayed or inadequate responses, as workers may not grasp the urgency or potential consequences of a developing emergency.

Human factors

Human factors are the primary contributors to poor situational awareness.

These factors are broadly categorized into the operator’s psychological state, communication issues and training deficiencies. These may include: ■ Fatigue. Working long hours and irregular shifts significantly increases mental and physical fatigue, which slows reaction times, decreases alertness, and impairs decision-making abilities.

■ Stress and emotional state. High-stakes situations create pressure, and stress can lead to “cognitive tunnel vision,” where an operator focuses on a limited number of tasks and misses critical information.

■ Distractions. Both internal distractions

(personal issues, mind-wandering) and external distractions (phone use, nonessential radio chatter, excessive noise) divert an operator’s attention.

■ Complacency and overconfidence.

Experienced operators may become overconfident in their abilities, leading them to overlook safety protocols or neglect pre-lift inspections, assuming that routine tasks are without risk.

■ Information overload. The large amount of data from modern crane systems and the complex site environment can overwhelm an operator’s cognitive capacity, making it difficult to process information effectively in real-time.

Training and experience usually root from issues that include: ■ Insufficient training. Operators who lack comprehensive training may not recognize safety hazards, misunderstand operational limits (like load charts), or be unable to respond appropriately during emergencies.

■ Inexperience. Less experienced operators may struggle to handle the high workload and stress of complex lifts, making them more vulnerable to errors in judgment.

■ Lack of safety awareness. Gaps in training

can result in a general lack of safety awareness and an inability to correctly predict the consequences of actions, a key component of situational awareness.

Missed cues

Communication issues: ■ P oor communication protocols. Lack of clear, standardized communication between the operator, rigger and signalperson leads to misunderstandings and dangerous errors.

■ Unclear signals. Failure to use standardized signals or relying on unreliable communication equipment (e.g., static-filled radios) results in misinterpretation of instructions.

■ Lack of teamwork. Inadequate coordination and a lack of trust among crane team members prevent the development of a shared understanding of the lift plan and potential hazards.

It is up to the entire crew to be fully aware of potential hazards associated with crane and rigging operations. This is why pre-lift planning, pre-lift meetings, fully filled out JSAs, sit walks and proper crane set up are crucial elements for successfully ■ completing the lift.

sales@nelsontrailers.com sales@nelsontrailers.com www.nelsontrailers.com sales@nelsontrailers.com www.nelsontrailers.com Phone: 419-523-5321 Phone: 419-523-5321 www.nelsontrailers.com

Phone: 419-523-5321

Festival FestivalGrounds Grounds#F43086 #F43086

Providing Providing Solutions Solutions for for all all of of North North America America LET LET US US ASSIST ASSIST YOU YOU WITH WITH YOUR YOUR TRANSPORTATION TRANSPORTATION NEEDS NEEDS Crane Crane ** Rigging Rigging ** Construction Construction ** Heavy Heavy Haul Haul ** Oversize Oversize ** Aerospace Aerospace

Steel Crane Mats

RC Load Orientation

Self-Leveling Cantilever Beams

Lightweight Lifting Beams

For over 30 years, the crane industry has trusted Greenfield Products to provide equipment solutions for both below the hook and below the outrigger. We embrace new opportunities to provide innovative solutions.

6448 6448 State State Route Route 224 224 Ottawa, Ottawa, OH OH 45875 45875

www.craneandtransportbriefing.com

708-564-3031 / greenfieldpi.com MARCH 2026 ACT

77

NO LIMITS. NO COMPROMISE. Specialty Consultants Supporting the Crane & Rigging Industry • Ground Condition Surveys & Stabilization Engineering • Lift Planning, Rigging & Shoring Engineering • 3D Laser Scanning & UAV (”Drone”) Data Collection • Haul Route Surveys • 24/7/365 Response • National Service Provider

708.430.7600

www.DearbornCos.com

Are you using your 2026 SC&RA logo?

2026 WINNER

2026 WINNER

2026 WINNER

SC&RA provides customized logos for members, sponsors, and award winners.

Want to get started?

Contact jbell@scranet.org to start marketing your status and prestige.

MEMBER 2026

2026 AWARD

2026 AWARD

2026

2026 AWARD

2026 AWARD

2026

2026 AWARD

2026

2026 AWARD

www.nccco.org CCO CERTIFICATION NEWS

The Gold Standard CCO Certification’s Employer Recognition Awards spotlight organizations that consistently invest in verified competence, third-party certification and safer jobsite outcome.

E

very year, employers make decisions that directly influence jobsite safety and operational reliability. Some of the most important choices may appear straightforward like investing in training, verifying competence and ensuring crews are prepared to perform under pressure. Now in its fourth year, CCO Certification’s Employer Recognition Awards highlight organizations that consistently make those decisions and reinforce them through accredited, third-party certification. The employers that are recognized demonstrate a sustained commitment to competence, accountability and safer outcomes.

Compliance support

A strong safety culture reveals itself in the moments crews can’t fully predict – when lift plans change, sites become more congested or operators face unfamiliar conditions. In those moments, preparation and validated competence matter. Employers recognized by CCO are displaying a clear message: qualification should be structured, measurable and independently verified. Certification provides a consistent framework for confirming that personnel meet nationally recognized standards across a wide range of roles connected to cranes and loadhandling equipment.

That independence is intentional.

CCO certifications are developed and maintained separately from training providers and employers, giving organizations a reliable, repeatable way to validate knowledge and skills – particularly on complex jobsites involving multiple contractors, equipment types and overlapping responsibilities.

OSHA regulations place significant emphasis on ensuring crane operators www.craneandtransportbriefing.com

As jobsites grow more complex, the industry benefits when employers raise expectations and make competence visible.

are qualified, and CCO Certification programs are widely recognized as being aligned with those requirements. For employers operating across multiple sites and jurisdictions, that alignment brings clarity. CCO Certification adds an additional safeguard that provides a structured, third-party assessment which supports consistency across crews and projects. This layered approach helps employers strengthen both compliance efforts and operational performance.

Industry recognition

Many organizations talk about safety. The employers recognized build the systems that make safety practical on active jobsites. Those systems often include: ■ Clear role definitions and jobsite responsibilities ■ Support for testing logistics and recertification planning ■ Ongoing skills development tied to real-world conditions ■ Leadership follow-through to maintain consistency across shifts and locations Certification becomes part of how work gets done and not an occasional box to check.

CCO Certification’s Employer Recognition Awards are grounded in measurable participation. Awards are based on testing volume as reflected on candidate exam applications and represent

employers with the highest number of CCO-certified personnel in a given year. This recognition reflects more than a single initiative. It signals sustained investment, coordination across teams, and leadership commitment.

Throughout 2026, CCO will visit recognized employers across the country to present awards in person and engage directly with the teams behind the work.

These visits turn recognition into shared learning, offering insights the broader industry can apply. Each employer’s story is unique, spanning utilities, energy, construction and specialized lifting environments. The common thread is a commitment to investing in people and validating competence through nationally accredited certification programs.

Why it matters

As jobsites grow more complex and the demand for qualified personnel continues to rise, the industry benefits when leading employers raise expectations and make competence visible. The takeaway is simple: when employers invest in certification, crews gain clearer standards, jobsites achieve more consistent performance, and the industry moves closer to safer outcomes. Congratulations to the employers being recognized for 2026. By investing in certification, these organizations are helping define the Gold Standard for competence, accountability and safer jobsite outcomes across the ■ industry.

MARCH 2026 ACT

79

JUNE

10 & 11

2026

NASHVILLE, TN

The essential education and networking event for tower crane professionals across North America.

EARLYBIRD TICKETS

SAVE 20% - USE CODE: TCNA20EB

VALID UNTIL 27 FEB

TRENDS & TECHNOLOGY | REGULATIONS & SAFETY | RENTAL MANAGEMENT | SITE REPORTS | MARKET FORECASTS SILVER SPONSOR

SILVER SPONSOR

FOR SPONSORSHIP OPPORTUNITIES CONTACT

US & CANADA: Michael Sharkey, +1 515 269 0258 michael.sharkey@khl.com RoW: Simon Battersby, +44 1892 786 232 simon.battersby@khl.com

WELCOME RECEPTION SPONSOR

BREAKFAST SPONSOR

LUNCH SPONSOR BRONZE SPONSOR

TOPLIST SPONSORS

CALL FOR SPEAKERS

US & CANADA: D.Ann Shiffler, Editor, American Cranes & Transport (ACT), +1 512 869 8838, d.ann.shiffler@khl.com RoW: Alex Dahm, Editor, International Cranes and Specialized Transport, +44 (0)1892 786 206, alex.dahm@khl.com

CREATED AND ORGANIZED BY

POWERED BY

EXCLUSIVE EVENT PARTNER

REGISTER YOUR PLACE

AMERICAN CRANES & TRANSPORT

www.khl-tcna.com TCNA FullPage Advert.indd 1

23/01/2026 10:12:05

MARKETPLACE

The Marketplace Find the products and/or services to do your job!

ACT’s Marketplace is designed to help readers find the products and services they need. It is divided into convenient categories including equipment for sale, crane & lifting services, transport & heavy haul, training and dealers & distributors.

82 Training Directory

90 Products, Parts & Accessories

Training, inspections and certification

Operational aids, communication systems, components, controls, software, crane mats and outrigger pads, crane repair, hydraulics, jacks, attachments, personnel baskets, rigging hardware, rollers, slings and chains, tires, winches, wire rope, batteries, braking systems, and new, used and refurbished parts.

83 Slings & Things Useful rigging hardware products.

97 Equipment for Sale or Rent Crane, rigging and lifting equipment for sale or rent, new or used.

84 Permit & Pilot Car Find a compant for your Permit & Pilot Car needs

85 Dealer Locator Find a Dealer/Distributor by using ACT’s Dealer Locator. Check out the interactive map online. Click to see where the dealers are and contact them from the map. From the printed page, please pick up the phone and call for your crane needs.

100 Safety Products Training, Fall Protection, Cameras, Safety Apparel, Signs, Lights, Hard hats

101 Transport & Heavy Haul Heavy Haul, Trailers, Freight forwarding, Pilot cars, Permitting companies.

Career Opportunities Posted Jobs in Your Industry

To advertise in the ACT Marketplace Contact BEV O’DELL Tel: 816-886-1858 e-mail: bev.odell@khl.com

www.craneandtransportbriefing.com MARCH 2026 ACT

81

/training

m

TRAINING COMPANY DIRECTORY TRAINING COMPANY DIRECTORY • TRAINING COMPANY DIRECTORY • TRAINING COMPANY

trol, LP ann / PAT)

TRAINING COMPANY DIRECTORY

TRAINING DIRECTORY

A1A Software (3D LiftPlan Training) 904 430-0355 www.a1asoftware.com/training Geoff Weiss

American Crane Training and Consulting 805-314-4121 www.americancranetraining.com Greg Peters greg@americancranetraining.com

CICB, Crane Inspection & Certification Bureau 800-327-1386 www.cicb.com info@cicb.com

Cheqed It Training 712-249-4598 www.cheqedit.com Shawn Sarsfield sugar@cheqedit.com

Crane Institute Certfication 407-878-5590 www.cicert.com help@cicert.com

Crane Institute of America 800-832-2726 www.craneinstitute.com James Headley info@craneinstitute.com

Crane Tech 1-800-290-0007 www.cranetech.com Sherri McLean smclean@cranetech.com

Crane U Inc 205-478-6331 www.craneu.com Madison Fant Locarno madison@craneu.com

Morrow Training Center 1-503-585-5721 ext 0118 or 0128 www.morrow.com training@morrow.com

NCCER 888-622-3720 Scott Fisher sfisher@nccer.org www.nccer.to/crane

OVERTON Safety Training, Inc. (866) 531-0403 www.overtonsafety.com Cody Fischer cody@overtonsafety.com

Stephenson Equipement Inc (SEI) 1-800-325-6455- ext 1154 www.stephensonequipment.com Chris Traino - Training Coordinator ctraino@stephensonequipment.com New State-of-the-Art Training Facility NOW OPEN!

This is a paid advertisement. If you would like to be included, contact Bev O’Dell - 816-886-1858 – bev.odell@khl.com

82

ACT MARCH 2026

PERMIT COMPANIES SLINGS AND DIRECTORY THINGS

ASC Industries Ltd 708-647-4900 www.ascindustries.com info@ascindustries.com

ALL Material Handling 312-698-8658 www.allmaterialhandling.com sales@allmaterialhandling.com

ALPS Wire Rope 630-893-3888 www.alpswirerope.com sales@alpswirerope.com

Associated Wire Rope & Rigging 310-448-5444 www.associatedwirerope.com Scott Fishfader sales@awrrinc.com

CCF LEGACY, INC 304-252-1389 www.machineropechain.com rooster@ccflegacy.com

Jergens Inc 1-877-486-1454 www.jergensinc.com info@jergensinc.com

Mazzella Lifting Technologies 800-362-4601 www.mazzellacompanies.com info@mazzellacompanies.com

Kennedy Wire Rope & Sling Co. 800-289-1445 kwrs.com info@kwrs.com

Slingmax Rigging Solutions 610-485-8500 www.slingmax.com info@slingmax.com

SLING AND THINGS • SLING AND THINGS • SLING AND THINGS • SLING AND THINGS • SLING AND THINGS • SLING AND THINGS

SLINGS AND THINGS

This is a paid advertisement. If you would like to be included, contact Bev O’Dell - 816-886-1858 – bev.odell@khl.com MARCH 2026 ACT

83

PERMIT & PILOT CAR • PERMIT & PILOT CAR • PERMIT & PILOT CAR • PERMIT & PILOT CAR • PERMIT & PILOT CAR

PERMIT & PILOT CAR

PERMIT REQUIRED

OVERSIZE LOA D A H E A D

A-1 Over the road Permits 1-573-659-4860 www.pcpermits.com Michael Petershagen permits@pcpermits.com Permits

AXYS Permits and Pilot Cars 1-866-356-AXYS (2997) www.axyspermits.com Donna Beaudoin donna@axyspermits.com Permits and Pilot Cars

Comdata (800) 749-7166

NOMAD PERMITS 469-644-2125 www.nomadpermits.com William McSweeney william@nomadpermits.com Superload Permits & Route Consulting

NOVA Permits & Pilot Cars 800-567-7775 www.novapermits.com Chris Alain chris@novapermits.com Permits and Pilot Cars

New York Truck Escorts & Permits 631-669-3742 www.newyorktruckescorts.com Maureen Mandich Orders@newyorktruckescorts.com NY and East Coast Permits and Pilot Cars

Permit America 866-573-7648 www.permitamerica.com Mary Simpson msimpson@permitamerica.com Permits

Pilotcarz4u LLC 1-803-266-5149 www.pilotcarz4u.com Kaye Greene-Smith kayegreenesmith@pilotcarz4u.com Continental US Pilot Cars

State Permits Inc 1-330-497-0446 http://www.statepermits.com Anthony Deliz adeliz@statepermits.com Permits

Transport Permits Ltd 1-800-373-9033 www.transportpermit.com John Schall john@transportpermit.com Permits

WCS Permits & Pilot Cars 1-888-737-6483 www.wcspermits.com Valerie Daniel valeried@wcspermits.com United States & Canada Permits and Pilot Cars

West Chester Permit 1-800-734-3544 www.wcpermit.com Scott Boehme info@wcpermit.com Permits

permits.comdata.com/permitservices/#!/

Gladys Work - gwork@comdata.com Promo code: KHL25 - 30% off a permit EXP 01/25 - restrictions apply

Permits and Pilot Cars

This is a paid advertisement. If you would like to be included, contact Bev O’Dell - 816-886-1858 - bev.odell@khl.com

84

ACT MARCH 2026

DEALER LOCATOR

ML Cranes & Equipment

Coastline Equipment 3908 N. Graham Street, Charlotte, NC. 28206 Crane Division Tel: 877-649-7739 325 N. 5th Street, Bldg. A www.mlcranes.com Sacramento, CA. 95811 Branches: Tel: 916-440-8090 Baltimore, MD. Bridgeville, DE. www.coastlinecd.com Chesapeake, VA. Manassas, VA. Branches: Richmond, VA. SantaAna, CA. Roanoke, VA. Tel: 714-265-6550 Winchester, VA. Wise, VA. Long Beach, CA. Tel: 562-273-7013 Bakersfield, CA. Tel: 661-399-3600 Oxnard, CA. Tel: 805-485-2106

Coastline Equipment Crane Division 325 N. 5th Street, Bldg. A Sacramento, CA. 95811 Tel: 916-440-8090 www.coastlinecd.com Branches: Santa Maria, CA. Santa Ana, CA. Tel: 805-922-8329 Tel: 714-265-6550 Las Vegas, Long Beach, CA. NV. Tel: Tel: 562-273-7013 702-399-2700 Bakersfield, CA. Elko, NV. Tel: 661-399-3600 Tel: 775-777-7070 Oxnard, CA. Tel: Meridian, 805-485-2106 ID. Santa CA. Tel:Maria, 208-888-3337 Tel: 805-922-8329 Las Jerome, Vegas, NV.ID. 208-324-2900 Tel: Tel: 702-399-2700 Elko, NV. McCall, ID. Tel: 775-777-7070 Tel: 208-634-3903 Meridian, ID. Tel: 208-888-3337 Jerome, ID. Tel: 208-324-2900 McCall, ID. Tel: 208-634-3903

Elliott dealer ad HPH.indd 1

12/12/2018 09:29:14

Contact your authorized Link-Belt distributor today!

Wood’s CRW Head Office: 795 Marshall Avenue Williston, VT 05495 Tel: 508-499-1944 E-Mail: cranesales@woodscrw.com www.woodscrw.com

Branches: Williston, VT 802-658-1700 North Oxford, MA 508-499-1950 Central Square, NY 315-676-2008 Carlisle, PA 717-795-0700

TRIAD MACHINERY Tel: 503-254-5100 www.triadmachinery.com Branches: Portland, OR Sumner, WA Eugene, OR Spokane, WA Bend/Prineville, OR Mt Vernon, WA

www.linkbelt.com

Find us on:

Burl Redman Crane Specialist (OR) 503-318-2140 Steve Zaback Crane Specialist (WA) 206-450-5220

DEALER LOCATOR • DEALER LOCATOR • DEALER LOCATOR • DEALER LOCATOR • DEALER LOCATOR • DEALER LOCATOR

Findaadealer dealer Find nearyou you near

Link-Belt Cranes

Lexington, Kentucky, USA | www.linkbelt.com MARCH 2026 ACT

85

DEALER LOCATOR • DEALER LOCATOR • DEALER LOCATOR • DEALER LOCATOR • DEALER LOCATOR • DEALER LOCATOR

DEALER LOCATOR

Bigge Equipment 10700 Bigge Ave, San Leandro, CA. 94577 Tel: (510) 877-7055 e-mail: cranesales@bigge.com www.bigge.com Branches: Houston, TX Southern CA

Rapicon inc Vars, ON Tel: 613-443-1323 e-mail: redmond@rapicon.ca www.rapicon.ca Tel: (713) 595-4598 Tel: (626) 427-8666

Cleveland Crane & Shovel Sales Inc. 26781 Cannon Road Cleveland, OH 44146 Tel: 440-439-4749 800-362-8494 e-mail: sales@craneandshovel.net www.craneandshovel.net

Shawmut Equipment Co, Inc 20 Tolland Turnpike, Manchester, CT. 06042 Tel: 800-829-4161, 860-643-4161 www.shawmutequipment.com Branches: South Easton, MA. Tel: 877-526-9213 or 508-238-1900 Shawmut Equipment of Canada, Inc Elmsdale, NS Tel: 902-883-7450

Contact your local dealer 86

ACT MARCH 2026

Kirby-Smith Machinery Inc 6715 W Reno Avenue Oklahoma City, OK 73127 Tel: 1-405-495-7820 e-mail: sales@kirby-smith.com www.kirby-smith.com Manitowoc and Grove Branches: Tulsa, OK McAlester, OK Kansas City, KS St Louis, MO National Crane Branches: Abilene, TX Amarillo, TX Dallas, TX Ft. Worth, TX Kansas City, KS Lubbock, TX McAlester, OK Odessa, TX Oklahoma City, OK St Louis, MO Tulsa, OK Hewitt, TX

www.manitowoc.com Contact your local dealer

www.manitowoc.com

Tel: 918-438-1700 Tel: 918-310-1550 Tel: 913-850-6300 Tel: 314-729-0125 Tel: 325-692-6334 Tel: 806-373-2826 Tel: 214-371-7777 Tel: 817-378-0600 Tel: 913-850-6300 Tel: 806-745-2112 Tel: 918-310-1550 Tel: 432-333-7000 Tel: 405-495-7820 Tel: 314-729-0125 Tel: 918-438-1700 Tel: 254-261-1370

MGX Eq mgxequi 844-DIA Manitow Billings Baton R Winston Manitow Ankeny Baltimo Dallas, T Denver, Houston Nashvil Norfolk Omaha, Phoenix Salt Lak Grove & Aiken, S Nationa Kansas Nationa Bloomin

Wood’s 795 Mar Willisto www.wo Tel: (508 Email: cr Branche Willisto North O Central Carlisle

92-6334 73-2826 71-7777 78-0600 50-6300 45-2112 10-1550 33-7000 95-7820 29-0125 38-1700 61-1370

MGX Equipment Services, LLC mgxequipment.com 844-DIAL-MGX Manitowoc, Grove, National Crane & Potain Branch: Billings, MT: Tel: 406-206-2007 Baton Rouge, LA Tel: 225-251-7500 Winston-Salem, NC Tel: 336-582-7400 Manitowoc, Grove & National Crane Branches: Ankeny, IA Tel: 515-965-1000 Baltimore, MD Tel: 443-399-7100 Dallas, TX Tel: 972-986-0910 Denver, CO Tel: 720-864-9842 Houston, TX Tel: 713-433-6411 Nashville, TN Tel: 615-562-3979 Norfolk, VA Tel: 757-935-4300 Omaha, NE Tel: 402-894-9300 Phoenix, AZ Tel: 602-232-0660 Salt Lake City, UT Tel: 801-297-8500 Grove & National Crane Branch: Aiken, SC Tel: 803-864-2840 National Crane & Potain Branch: Kansas City, MO Tel: 816-451-1745 National Crane Branch: Bloomington, MN Tel: 952-888-2525

Wood’s CRW 795 Marshall Avenue Williston, VT 05495 www.woodscrw.com Tel: (508) 499-1944 Email: cranesales@woodscrw.com Branches: Williston, VT North Oxford, MA Central Square, NY Carlisle, PA

Tel: 802-658-1700 Tel: 508-499-1950 Tel: 315-676-2008 Tel: 717-795-0700

Stephenson Equipment, Inc 7201 Paxton Street Harrisburg, PA. 17111 Tel: 800-325-6455 www.stephensonequipment.com Branches: McDonald, PA Pittston, PA Prospect Park, PA Syracuse, NY Waterford, NY

Tel: 800-692-7600 Tel: 866-667-6756 Tel: 800-220-4033 Tel: 800-368-6455 Tel: 518-357-2200

Western Pacific Crane & Equipment 8600 Calabash Ave, Fontana, CA. 92335 Tel: (866) 480-1203 e-mail: info@wpcrane.com www.wpcrane.com Branches: Arlington, WA Anchorage, AK Bakersfield, CA Fontana, CA Kapolei, HI Lathrop, CA North Plains, OR

Tel: 253-254-7950 Tel: 907-331-4876 Tel: 661-578-5854 Tel: 562-286-6618 Tel: 808-682-7263 Tel: 209-597-3824 Tel: 971-202-4002

MARCH 2026 ACT

DEALER LOCATOR • DEALER LOCATOR • DEALER LOCATOR • DEALER LOCATOR • DEALER LOCATOR • DEALER LOCATOR

38-1700 10-1550 50-6300 29-0125

DEALER LOCATOR

87

DEALER LOCATOR • DEALER LOCATOR • DEALER LOCATOR • DEALER LOCATOR • DEALER LOCATOR • DEALER LOCATOR

DEALER LOCATOR

88

Coastline Equipment Crane Division

325 N. 5th Street, Bldg. A, Sacramento, CA. 95811 Tel: 916-440-8090 www.coastlinecd.com Branches: Santa Ana, CA. Tel: 714-265-6550 Long Beach, CA. Tel: 562-273-7013 Bakersfield, CA. Tel: 661-399-3600 Oxnard, CA. Tel: 805-485-2106 Santa Maria, CA. Tel: 805-922-8329 Las Vegas, NV. Tel: 702-399-2700 Elko, NV. Tel: 775-777-7070 Meridian, ID. Tel: 208-888-3337 Jerome, ID. Tel: 208-324-2900 McCall, ID. Tel: 208-634-3903

Empire Crane Co, LLC

7021 Performance Drive, Syracuse, NY 13212 www.empirecrane.com E-mail: sales@empirecrane.com Branches: Syracuse, NY Tel: 315-458-4101 Hanson, MA Tel: 508-868-7734 Bridgewater, NJ Tel: 908-203-0400

6635 S. 13th St, Milwaukee, Wi 53221 Tel: 414-764-9200 Beau Grassl Sales Manager e-mail: bgrassl@giuffre.com www.giuffre.com

Giuffre Midwest LLC

www.ExactCrane.com E-mail: Sales@exactcrane.com Parts@exactcrane.com Tel: 440-349-1999

9725 Industrial Dr, Bridgeview, IL 60455 Tel: 708-656-9200 Todd Proctor General Manager e-mail: tproctor@giuffre.com www.giuffre.com

Giuffre Bros. Cranes, Inc.

Giuffre Midwest LLC

Exact Crane & Equipment Corp

6635 S. 13th St, Milwaukee, Wi 53221 Tel: 414-764-9200 Beau Grassl Sales Manager e-mail: bgrassl@giuffre.com www.giuffre.com

ACT MARCH 2026

Giuffre Bros. Cranes, Inc.

9725 Industrial Dr, Bridgeview, IL 60455 Tel: 708-656-9200 Todd Proctor General Manager e-mail: tproctor@giuffre.com www.giuffre.com

Bigge Crane and Rigging Co. Tel: (510) 877-7055 E-mail: cranesales@bigge.com www.bigge.com Authorized dealer in CO, UT, AZ, NM Branches: Phoenix, AZ Tel: (623) 267-5077 Denver, CO Tel: (720) 902-3429 Albuquerque, NM Tel: (505) 587-8865 Salt Lake City, UT Tel: (801) 951-7202

Exact Crane & Equipment Corp www.ExactCrane.com E-mail: Sales@exactcrane.com Parts@exactcrane.com Tel: 440-349-1999 Authorized dealer for KY, MI, OH and Western PA

© Tadano Ltd. 2025

Find your authorized Tadano Distributor

Mountain Crane Service 393 S Monterey St Salt Lake City, UT 84104 www.mountaincrane.com Tel: 206-639-7319 e-mail: Scott@mountaincrane.com Authorized Dealer in WA, OR Branches: Salt Lake City, UT Monroe, WA Phoenix, AZ Boise, ID Billings, MT Sinclair, WY Abilene, TX

Coastline Equipment Crane Division Find your authorized Tadano Distributor 325 N. 5th Street, Bldg. A Sacramento, CA 95811 Tel: 916-440-8090 www.coastlinecd.com Authorized dealer in CA, ID, NV Branches: Santa Ana, CA Tel: 714-265-6550 Long Beach, CA Tel: 562-273-7013 Bakersfield, CA Tel: 661-399-3600 Oxnard, CA Tel: 805-485-2106 Santa Maria, CA Tel: 805-922-8329 Las Vegas, NV Tel: 702-399-2700 Elko, NV Tel: 775-777-7070 Meridian, ID Tel: 208-888-3337 Jerome, ID Tel: 208-324-2900 McCall, ID Tel: 208-634-3903

Scott-Macon Equipment 14925 S. Main St. Houston, TX 77035 Tel: 713-721-7070 e-mail:4242 info.houston@smequipment.com www.tadanoamericas.com Tadano America Corporation, W Greens Rd, Houston, TX 77066 Phone +1 (281) 869-0030 www.smequipment.com Authorized dealer for OK, TX Empire Crane Co, LLC Branches: 7021 Performance Drive, Dallas, TX Tel: 214-391-4000 Syracuse, NY 13212 San Antonio, TX Tel: 210-629-0400 www.empirecrane.com Corpus Christi, TX Tel: 361-289-2782 e-mail: sales@empirecrane.com Odessa, TX Tel: 210-238-7718 Syracuse, NY Tel: 315-458-4101 Tulsa, OK Tel: 918-224-2000 Hanson, MA Tel: 508-868-7734 Oklahoma City, OK Tel: 405-639-8226 Bridgewater, NJ Tel: 908-203-0400 Midland, TX Tel: 432-385-7595

DEALER LOCATOR • DEALER LOCATOR • DEALER LOCATOR • DEALER LOCATOR • DEALER LOCATOR • DEALER LOCATOR

© Tadano Ltd. 2025

DEALER LOCATOR

Find

www.t

Find

www.t

www.t

Tadano Housto

www.t

Tadano Housto

www.tadanoamericas.com

Tadano America Corporation, 4242 W Greens Rd, Houston, TX 77066 Phone +1 (281) 869-0030

MARCH 2026 ACT

89

P R O D U C T S , PA R T S & A C C E S S O R I E S • P R O D U C T S , PA R T S & A C C E S S O R I E S • P R O D U C T S , PA R T S & A C C E S S O R I E S

PRODUCTS, PARTS & ACCESSORIES

LUBE-A-BOOM

FRICTION REDUCING LUBRICANTS

PERFORMANCE YOU CAN TRUST Maximize performance, reduce wear, and extend equipment life with our advanced, purpose-built lubricants.

Trusted by OEMs, equipment owners, service techs, and operators who demand reliability in the toughest conditions.

SCAN TO FIND OUT MORE

Ri A

 LUBE-A-BOOM® Grease

 LUBE-A-BOOM® Aerosol

 LUBE-A-BOOM® Clear

 LUBE-A-BOOM® Degreaser

 LUBE-A-BOOM® Dry Film

 LUBE-A-BOOM® Insulator

 SMOOTH OPERATOR HYDRAULIC OIL ADDITIVE

 LOOSE-N-IT™

 LUBE-A-AG®

NEW!

 LUBE-A-ROPE ROPE GUARD G N I COM ON   SO ™

3 IN 1 PENETRANT FOR WIRE ROPE

 EXCELLENT WATER RESISTANCE  WON’T FLING OFF  HIGH ADHESION  EASY TO INSPECT WITHOUT CLEANUP  ANTI CORROSION  NLGI 1  COLORLESS

EASY TO SEE FRAYS & BREAKS IN THE WIRE ROPE

90

ACT MARCH 2026

Fin sa an pr a ge pr

NUP

OPE

“ SLICK JUST GOT SLICKER”

We use LUBE-A-BOOM on all our cranes from our 5-ton Crane Carry Deck to 250-ton Cranes. We have found that LUBE-ABOOM has outperformed all the other products we have used in the past. We even use LUBE-A-BOOM on our Landoll sliding axle and extendable trailers. Now, these products are used company-wide on our entire fleet.

Finally! There is one company that satisfies all our lubrication requirements and the best part is, it is reasonably priced. Whether we need to lubricate a load cable, load chain or pinion gear, LUBE-A-BOOM has the right product for the application.

LUBE-A-SHINE, it cleans and protects like no other product I’ve used. It eliminates using multiple products.

Whether polishing the trucks to get them ‘show ready’ or cleaning grease off of a customer’s crane. LUBE-ASHINE is my go to!

Richard Wehrmeister Advanced Overhead Crane – Crosby, TX

James Flaherty Flaherty Equipment & Repair

 LubeJet pneuMATO 55

 LUBE-A-GEAR™

 LUBE-AHAMMER®

 LUBE-A-PIN® Grease

 LUBE-A-ROPE™ Aerosol

 LUBE-A-ROPE™ GREASE

 LUBE-A-ROPE™ Liquid

 LUBE-A-SHINE™

 LUBE-A-PAK

 LubeJet-eco Spray Gun

a dealer near  Find you with our online dealer locator

TM

Imperatore Crane Rental & Rigging Services

CONTACT THE TEAM TODAY

P R O D U C T S , PA R T S & A C C E S S O R I E S • P R O D U C T S , PA R T S & A C C E S S O R I E S • P R O D U C T S , PA R T S & A C C E S S O R I E S

nd

PRODUCTS, PARTS & ACCESSORIES

T: 317.578.3961 sales@lubeaboom.com

www.lubeaboom.com MARCH 2026 ACT

91

P R O D U C T S , PA R T S & A C C E S S O R I E S • P R O D U C T S , PA R T S & A C C E S S O R I E S • P R O D U C T S , PA R T S & A C C E S S O R I E S

PRODUCTS, PARTS & ACCESSORIES

92

JERGENS LIFTING SOLUTIONS

DEPENDABLE AMERICAN-MADE QUALITY Inch and metric sizes available Proof tested to 200% of rated load capacity Rated at 5:1 strength factor Variety of styles available

877-440-LIFT (5438) | LIFTING@JERGENSINC.COM

ACT MARCH 2026

PRODUCTS, PARTS & ACCESSORIES

• Heavy Lifting & Rigging • Mooring Systems • Anchor Handling

Shackles

Thimbles

Tri-Plates

Links

Hooks

www.associatedwirerope.com Ph: 310.448.5444

Ph: 310.522.9698

sales@awrrinc.com

sales@watermansupply.com

Feb 2019 CRANE half alpswirerope.com 630.893.3888

Since 1968

P R O D U C T S , PA R T S & A C C E S S O R I E S • P R O D U C T S , PA R T S & A C C E S S O R I E S • P R O D U C T S , PA R T S & A C C E S S O R I E S

Leading Manufacturer of Products & Accessories for:

Alps® is a joint venture of verope AG and Kiswire Ltd.

260130_ACT-01.indd 3

30.01.26 10:52 MARCH 2026 ACT

93

P R O D U C T S , PA R T S & A C C E S S O R I E S • P R O D U C T S , PA R T S & A C C E S S O R I E S • P R O D U C T S , PA R T S & A C C E S S O R I E S

PRODUCTS, PARTS & ACCESSORIES

94

ACT MARCH 2026

PRODUCTS, PARTS & ACCESSORIES

310-522-9698 SALES@WATERMANSUPPLY.COM

ASSOCIATEDWIREROPE.COM

CRANE AND RIGGING LIFT PLANNING SOFTWARE Liebherr LTM1500-8.1

LiftPlanner is a 3D Crane and Rigging planning software custom made to include the cranes in your fleet. The software controls Crawlers, ATs, RTs, Towers, transport, gantries and other lift equipment.

AT crane controls are: • Select Main/Guyed/Jib/SL config • Assemble configuration • Move entire crane with load • Swing topworks with load • Hook "GoTo Point" command • Raise/lower Hook with load • Spin Hook/load (tagline) • Boom Up/Down • Telescope • Skew carrier orientation

LiftPlanner “Intelligent 3D model” Boat lift

LiftPlanner has an extensive Rigging library and programs to create vessels, exchangers, steel, supports, chokers & piping. Libraries from Crosby, Van Beest, Modulift, steel and outrigger mats.

LiftPlanner Software gives you the ability to pre-test every aspect of your lift before setting foot in the field.

There is a "BOM sum deductions" for rigging and many tools to create lift diagrams. Rendering and many presentation tools for the Lift Director.

P R O D U C T S , PA R T S & A C C E S S O R I E S • P R O D U C T S , PA R T S & A C C E S S O R I E S • P R O D U C T S , PA R T S & A C C E S S O R I E S

310-448-5444 SALES@AWRRINC.COM

www.liftplanner.com MARCH 2026 ACT

95

P R O D U C T S , PA R T S & A C C E S S O R I E S • P R O D U C T S , PA R T S & A C C E S S O R I E S • P R O D U C T S , PA R T S & A C C E S S O R I E S

PRODUCTS, PARTS & ACCESSORIES

HEATER

Ideal for Heating Cabs of Heavy Equipment H-C-1

D is tr ib u to rs W e lc o m e H-C-1-24V

Dimensions.....................16” W x 11 1/2” T x 8” D ............16” W x 11 1/2” T x 8” D Rating .......................................20000 BTU ............................................. 20000 BTU Fuel Requirement ..................Propane (LP gas) .................................Propane (LP gas) Fuel Consumption .....................1 lbs/hr max......................................... 1 lbs/hr max Rated Voltage ............................12 volts DC ............................................. 24 volts DC Operating Voltage Range ....... 12 - 14 volts DC................................... 20 - 28 volts DC Current Draw................................4 amps ................................................... 2.5 amps

706 North Weber • Sioux Falls, SD 67103

800-845-1385 www.elstonmfg.com DESIGNED TO REPLACE THE HUNTER HEATER

STYLE GUIDE

PRIMARY LOGO The Garrod primary logo can appear in either full color (orange, dark teal and grey), all black, teal or white or grey scale.

Primary Logo with Tagline

1 COLOR BLACK

96

MARKETPLACE ADVERTISE HERE

Garrod Hydraulics provides cylinder repair solutions for all makes and models of cranes.

1 COLOR PMS 7477

1 COLOR GREY SCALE

50 %

100 %

20 %

Toughest repairs done.

Respond with timely, cost-effective solutions.

Use OEM parts.

Specific to your needs.

Technology unsurpassed.

Expertise in the repairs and remanufacturing of hydraulic cylinders.

Demand our employees provide highest customer satisfaction.

Page 1 of 2

Garrod Hydraulics, Inc 1050 Locust Point Road, York. PA 17406 866-4-GARROD brian@garrod.com garrod.com

ACT MARCH 2026

Contact Bev O’Dell on tel: 1 816 886 1858 or e-mail: bev.odell@khl.com

EQUIPMENT FOR SALE OR RENT

LIFT SOURCE MACHINERY MACHINERY YOUR (BARE) RENTAL/RPO PARTNER FOR ATs, RTs & CRAWLERS

REACH HIGHER. LIFT SMARTER.

YOUR RENTAL & RPO PARTNER FOR AT’S, RT’S & CRAWLERS • Liebherr & Tadano 75-1000T • Large North American Fleet • Bare Rentals & RPO’s • 4th Generation Family Owned • Unmatched Support

109 N. Post Oak Lane, Suite 400 Houston, Texas 77024 Lift Source Machinery, Ltd.

Let’sOak Lift Lane, Your Bottom Line! Request Your Quote Today.

109 N. Post Suite 400 Houston, Texas 77024 +1 (713) 975-7702 | www.lsmcrane.com | info@lsmcrane.com Lift Source Machinery, Ltd. sells & rents All-Terrain, Rough Terrain and Crawler Cranes. We bare-rent, offering clients flexible solutions to supplement their owned-fleet by rent, or RPO. We are family-owned and operated,with our 4th generation serving the industry.Our fleet capabilities range from 50 Tons to 1,350 Tons.

EQUIPMENT FOR SALE OR RENT

Contact us for all of your crane needs!

ALL OWNED BY US.

•

delivers the heavy lift power your jobs depend on.

Lift Source Machinery, Ltd. sells & rents All-Terrain, Rough Terrain and Crawler Cranes. We Withtheir modern cranes,byflexible bare-rent, offering clients flexible solutions to supplement owned-fleet rent, or RPO. rental & purchase options, and a teamserving built on generations We are family-owned and operated,with our 4th generation thefour industry.Our fleetof industry experience, we help you capabilities range from 50 Tons to 1,350 Tons. keep projects moving on time and Contact us for a rental quote; we will structure a competitive proposal based on your job on budget. and capital requirements.

EQUIPMENT FOR SALE OR RENT

LIFT SOURCE

• EQUIPMENT FOR SALE OR RENT

Contact us for a rental quote; we will structure a competitive proposal based on your job and capital requirements.

Contact us for all of your crane needs!

ALL OWNED BY US.

+1 (713) 975-7702

|

www.lsmcrane.com

|

info@lsmcrane.com

MARCH 2026 ACT

97

We master gravity This is what superior lifting looks like. Delivering cranes with heavy lifting capacity and various configurations we master the toughest of lifting challenges. With our cranes any job becomes a safe and feasible task, any lift can be conquered.

More information: +31 10 238 07 00 // info@schaftencranes.com schaftencranes.com Ad_SchaftenCranes_10-02-26.indd 1

EQUIPMENT FOR SALE OR RENT

•

EQUIPMENT FOR SALE OR RENT

•

EQUIPMENT FOR SALE OR RENT

EQUIPMENT FOR SALE OR RENT

98

ACT MARCH 2026

10-02-2026 10:50

EQUIPMENT FOR SALE OR RENT

Come chat with our team at the following booths at ConExpo in Las Vegas, March 3-7, 2026

booth F16045

booth F35004

booth F47010

EQUIPMENT FOR SALE OR RENT

SEE EMPIRE CRANE AT CONEXPO!

•

booth F40054

1-800-342-7575

www.EmpireCrane.com

booth P8106

sales@empirecrane.com

•

Emerson Crane Rental Inc. diverse crane fleet sizes from 30-ton to 450-ton.

EQUIPMENT FOR SALE OR RENT

booth F46010

EQUIPMENT FOR SALE OR RENT

Other services provided are: Standard and Super load trucking; Indoor/Outdoor storage; Civil work and site restoration; Telehandler and Boom lift rentals; Rigging and Machinery moving; Lift planning and logistics.

The Lifting Professiials

John Emerson 319-234-9114 3488 Wagner Rd, Waterloo IA 50703 john@emersoncranerental.com www.emersoncranerental.com

MARCH 2026 ACT

99

(805) 314-4121 americancranetraining.com  Contact us today for group rates & availability!

ELEVATE YOUR CREW WITH INDUSTRY-LEADING CRANE & RIGGING TRAINING New to the field? Need to recertify?

Our comprehensive, hands-on training programs give operators the skills, confidence, and credentials to work safely and succeed on the job. American Crane Training & Consulting, Inc. offers all levels of training—from essential basic courses to full CCO certifications.

For many organizations, annual safety training is required to uphold internal policies, even when certification isn’t mandated. Our training ensures your employees receive— and you can document—the essential safety knowledge needed.

CCO TRAINING DELIVERED ON YOUR SCHEDULE Keep your workforce compliant with the latest OSHA and industry standards. We come directly to your location—training tailored to your worksite, equipment, and crew.

Professional CCO Services:  Crane Operator Certification (Initial & Recert)  Rigger Level I & Rigger Level II  Signal Person Certification  Written & Practical Exam Preparation  Flexible Scheduling to Reduce Downtime

WHY TRAIN WITH US?  CCO Initial Certification & Recertification  Expert, Certified Instructors  Focused Written & Practical Exam Prep  On-Site or Virtual Training Options Train with us — advance your skills, stay compliant, and operate with confidence.

Build a safer, more efficient, fully certified workforce.

SAFET Y & TRAINING

•

SAFET Y & TRAINING

•

SAFET Y & TRAINING

•

SAFET Y & TRAINING

SAFETY & TRAINING

SAFETY TRAINING, INC.

SAFET Y & TRAINING

•

Www.overtonsafety.com (866) 531-0403

Qualification Programs FOR OPERATORS/END USERS AND TRAINERS including Forklift • MOBILE ELEVATED WORK PLATFORM • LOADER Rigging & Signaling • Articulating Crane • Fall Protection OVERHEAD Crane • PLUS OVER 20 MORE PROGRAMS!

preparatory COURSES and CCO NATIONAL Certification EXAMS FOR Mobile Crane • Articulating Crane • Digger Derrick •Tower Crane • Service Truck Crane • Overhead Crane • LATTICE • RIGGER LEVEL 1 • SIGNALPERSON • TELEHANDLER

100 ACT MARCH 2026

Onsite open enrollment Training Materials

OST fully endorses the national certification program offered by the National Commission for Certification of Crane Operators (NCCCO), and will prepare candidates for the NCCCO certification examinations.

TRANSPORT & HEAVY HAUL

Goldhofer | Buckingham | TransMaster | Trail King Trailers | Dollies | Jack & Slide Systems

610-488-8969 | www.BuckinghamEquipment.com

Tel: (519) 448 - 3919 hydraulicskiddingsystems@gmail.com

Launching and Skidding Solutions Heavy Duty Rollers ranging from 15 - 100 Tons

TRANSPORT & HEAV Y HAUL • TRANSPORT & HEAV Y HAUL • TRANSPORT & HEAV Y HAUL • TRANSPORT & HEAV Y HAUL

TRAILER AND EQUIPMENT RENTALS

Modular and Long Distance Hydraulic Skidding Systems ranging from 100 - 1000 Tons www.hydraulicskiddingsystems.com MARCH 2026 ACT

101

TRANSPORT & HEAV Y HAUL • TRANSPORT & HEAV Y HAUL • TRANSPORT & HEAV Y HAUL • TRANSPORT & HEAV Y HAUL

TRANSPORT & HEAVY HAUL

Used Trailer Specials

Qty 5 - 2019 Vanguard VIP Vans, 53’x102”x13’6”, A/R, Swing Doors, Aluminum Roof

Qt Da Shee R

New Trailer Specials $112,950 FET Included (w/o

Wheel Covers)

$45,500 FET Included

$139,895 FET Included

$1

2026 XL SPEC XL110SA 55-TON SLIDE AXLE, 53'x102", 38” Deck, 18' Deck Ht, Tri-Axle, WARN 30K Winch w/ Remote, Alum Outers.

2027 BEAM (at s Beam Ax

Daily Rentals & Long-Term

Le

Qty 12 – 2026 FONTAINE Qty 12 – NEW MANAC 55LCC, 53'x102", 26' Well, 18' Deck STEEL DROPS, 48'x102", Ht, NGB, Air Ride, Rear Axle Lift, Alum Outer Wheels, 275/70R22.5, 10' Top, 38' Main, Galv C/M's, 10'1" Hend Air Spread, Rear Strobe Lights. Some w/ Wheel Axle Dump, Winch Track Covers, Available in Red & Black.

35-Ton & 55-Ton Hydraulic Detachables $100/Day (1-week min.)

Single & Double Drop Extendables 102

2018 Fontaine 55 TON DSR, 26’ well, 15” deck height

Qty 95 – 2015 Reitnouer & Benson 48'x102" Flatbeds, Alum Wheels, Winch Track, Disc Brakes, Tire Inflation, Coil Package & More

ACT MARCH 2026

48’ & 53’ Flatbed Extendables

Pittsburgh, PA 412-747-7777

Hubbard, OH 330-534-0082

Lancaster, PA 717-569-4531

Cincinnati, OH 513-874-4880

Used Trailer Specials

Qty 2 – 2013 Great Dane, 48’x102”x13’6”, Sheet & Post Vans, Spring Ride, (1) Side Door

Qty 12 – 2019 Reitnouer Maxmiser Alum Flats, 53'x102", Rear Axle Slide, Cal Legal, Front Lift Axle, Winch Track Both Sides, Alum Outer Wheels, Disc Brakes

Qty 15 – 2018 & 2019 Reitnouer Dropmiser, 48'x102", 10'1" Spread, Rear Axle Slide, Disc Brakes, Winch Track Both Sides, Coil Pkg, Alum Outer Wheels (GREAT COUNTERWEIGHT TRAILERS!)

New Trailer Specials $146,750 FET Included

$62,500 FET Included

$109,000 FET Included

0SA E, ck Ht, h w/ .

2027 FONTAINE 60-TON BEAM LOWBOY, 54' 9"x102" (at suspension), 28' Well, 23" Beam Hgt, Modular, Rear Lift Axle, Alum Outer Wheels

Qty 4 – NEW BWS 50-TON TRI-AXLE STEEL DROPS, 48'x102", 11’ Top Deck, 115,000 GVWR, Center Lift Axle, 15 pair Chain Slots, Winch Track w/12 Winches

(4) 2026 XL SPECIALIZED GUARDIAN 55-TON LOWBOYS, 53’x102”, 26’ Deck, 18” Deck Ht, 5 Ride Heights, Rear Axle Lift, Alum Outer Wheels, Strobes

rm

Leases Available, Call 412-446-3800

ded

48’ & 53’ Dropdecks

Extendables (Tandem & Tri-Axles) $40/Day (2-week min.)

$20/Day (1-week min.)

TRANSPORT & HEAV Y HAUL • TRANSPORT & HEAV Y HAUL • TRANSPORT & HEAV Y HAUL • TRANSPORT & HEAV Y HAUL

ouer FlatWinch InflaMore

TRANSPORT & HEAVY HAUL

48’ & 53’ Flatbeds w/ Sliding Tandems MARCH 2026 ACT

103

TRANSPORT & HEAV Y HAUL • TRANSPORT & HEAV Y HAUL • TRANSPORT & HEAV Y HAUL • TRANSPORT & HEAV Y HAUL

TRANSPORT & HEAVY HAUL

PORT NY /NJ

Transloading Warehouse

Damaged Container Pickups with Flatbed Specialty Cargo - Pipes, Bundles, Coils, Slip Sheets Flat Racks/Open Tops - Out of Gauge Floor Loads Vehicles - Cars, Boats, Bikes, Equipment Overweight Containers

200 Route 22 Hillside, NJ 07205

908-862-0061 sales@shipmw.com

www.shipmw.com

WCS PERMITS & PILOT CARS

OVERSIZED/OVERWEIGHT PERMITS TRIP & FUEL PERMITS pilot cars route surveys logistics consulting EQUIPMENT SALES

FOLLOW US ON SOCIAL MEDIA!

888.PERMIT.3 104

ACT MARCH 2026

888.737.6483

WCSPERMITS.COM

TRANSPORT & HEAVY HAUL

ELEVATE CRANE COUNTERWEIGHT EFFICIENCY Faster to move. Easier to secure.

We Create Customer Specific Solutions that Exceed Expectations…

Every Time.

Crane CounterweightPro Chassis TM

• Lower center of gravity

• Faster load and unload

• Lightweight and stackable

• Increased maneuverability

• Small footprint/ large capacity

Get more info at millertransfer.com/act For your next project, contact: dcochran@millertransfer.com or 330-325-2521 Ext. 271

TRANSPORT & HEAV Y HAUL • TRANSPORT & HEAV Y HAUL • TRANSPORT & HEAV Y HAUL • TRANSPORT & HEAV Y HAUL

Serving the United States, Canada and Mexico

and ! em ailable d n Ta le Av Ax Tri-

Randy Hurst

Regional Sales Manager CELL: 570-233-3852 EMAIL: rhurst@cheetahchassis.com

MARCH 2026 ACT

105

MOVING UP

O

BRIEFLY

regon-based OXBO Mega Transport Solutions has promoted Andy Hulings to chief operating officer, elevating a long-time leader whose career has grown alongside the company’s expansion in specialized rigging and transportation.

Hulings joined OXBO at age 18 and has spent more than 22 years advancing through the organization, building hands-on experience across operations and earning

n Timothy Klein has been

promoted to senior principal engineer, global lifting and fabrication at WireCo. Klein has been with the company for the last 25 years. “This is an exciting new role for me that I am looking forward to developing. New challenges, team members and a much wider product space,” he wrote to a post on LinkedIn.

n Paul Hiltenbeitel has been named vice president of sales and marketing for Arrowhead Winch. Hiltenbeitel joined Arrowhead Winch (formerly PACCAR Winch) as a senior district sales manager in 2020 and was promoted to director of sales in 2024. n Engineered Rigging has promoted Charles Anderson to assistant project manager following his completion of an internship with the company last fall.

106 ACT MARCH 2026

a reputation for steady leadership. Now 40, he was recognized in 2023 as one of the SC&RA’s Top 4 Under 40, an honor highlighting his influence within the specialized transportation and rigging sector.

Over the course of his career, Hulings has played a key role in shaping OXBO’s operational strategy and delivering some of the company’s most complex projects across North America.

In his new role as COO, Hulings will oversee companywide operations, with a focus on aligning processes and procedures across all branches as OXBO continues to grow.

“Congratulations to Andy on this well-deserved

Jeff Steiner celebrated his 30th anniversary as chief executive officer of Bigfoot Construction Equipment. The Woodstock, IL-based company manufactures wood and plastic outrigger pads.

Andy Hulings

promotion,” said Keith Settle, chief executive officer. “We look forward to the continued success of OXBO under his leadership.” ■

Frank Hegan has reached a 21-year milestone as president and co-owner of Crane Tech Solutions. Crane Tech operates from its corporate headquarters located in Portsmouth, VA.

New CIO for Maxim Crane Works Maxim Crane Works has Maxim’s technology platform promoted Dave Reed to chief and integrating IT more information officer, advancing closely with day-to-day the executive who has led business operations. the company’s information “Dave has been instrumental in modernizing our technology technology operations foundation,” said since joining the Sean Collopy, organization in chief financial 2022. officer, Maxim Reed was Crane Works. “His most recently leadership, vision vice president and partnership of information have created technology and has improvements in been instrumental Dave Reed efficiency, data in strengthening

accessibility and system reliability.” As CIO, Reed will continue to lead technology as an enabler to increase efficiency and performance.

“Maxim has an extraordinary team, and everything we’ve accomplished so far has been possible because of strong collaboration within the company,” Reed said. “Our focus remains clear – using technology to simplify work, unlock insights and empower our people to operate at their ■ best.”

Link-Belt expands RT crane team Link-Belt Cranes has named Nathan Ramsey as marketing specialist for its rough terrain crane product line. The announcement was made at the company’s headquarters in Lexington, KY. In his role, Ramsey will provide marketing and sales support for rough terrain crane products to internal teams and distributor sales personnel. He holds

“Nathan brings a unique a mechanical engineering work experience and skillset degree from West Virginia to our marketing team,” said University and brings Kelly Fiechter, experience from the product manager energy transmission for rough terrain and automotive cranes. “I look industries, where forward to watching he worked on him grow as he takes engineering projects on the marketing involving natural gas specialist role for the pipeline equipment rough terrain crane design and vehicle Nathan Ramsey ■ product line.” durability testing. www.craneandtransportbriefing.com

BENCHMARKS

Hulings named OXBO COO

Lifting • Securing• Mobilizing

Pantone 485

Lifting • Securing• Mobilizing

Lifting • Securing• Mobilizing