Template Name: OM_1_col Template Date: 1994_05_26
Don 6-5390
TRIM THIS EDGE
RIGHT PAGE
Alt= to hide template information Alt+ to display template information
TRIM THIS EDGE
2120, 2130, 2140 2150 Pro Tractors
Template Name: OM_1_col Template Date: 1994_05_26
!
THIS SAFETY ALERT SYMBOL INDICATES IMPORTANT SAFETY MESSAGES IN THIS MANUAL. WHEN YOU SEE THIS SYMBOL, CAREFULLY READ THE MESSAGE THAT FOLLOWS AND BE ALERT TO THE POSSIBILITY OF PERSONAL INJURY OR DEATH. M171B
Safety Decals on this machine use the words Danger, Warning or Caution, which are defined as follows:
● DANGER: Indicates an immediate hazardous situation which, if not avoided, will result in death or serious injury. The color associated with Danger is RED.
● WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in serious injury. The color associated with Warning is ORANGE.
● CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices. The color associated with Caution is YELLOW. Safety Decals on this machine which are ISO-two panel Pictorial type decals, are defined as follows: TRIM THIS EDGE
● The first panel indicates the nature of the hazard. ● The second panel indicates the appropriate avoidance of the hazard. ● Background color is YELLOW. ● Prohibition symbols such as and STOP if used, are RED.
Alt= to hide template information Alt+ to display template information
! WARNING IMPROPER OPERATION OF THIS EQUIPMENT CAN CAUSE INJURY OR DEATH. BEFORE USING THIS EQUIPMENT, MAKE CERTAIN THAT EVERY OPERATOR:
● Is instructed in safe and proper use of the machine. ● Reads and understands the Manual(s) pertaining to the equipment. ● Reads and understands ALL Safety Decals on the equipment. ● Clear the area of other persons. ● Learns and practices safe use of equipment controls in a safe, clear area before operating this machine on a job site. It is your responsibility to observe pertinent laws and regulations and follow Case Corporation instructions on machine operation and maintenance.
Don 6-5390 October 1998
© 1998 Case Corporation Case and IH are registered trade marks of Case Corporation
TRIM THIS EDGE
LEFT PAGE
SAFETY/DECALS ............................................................................................. 6 INTENDED USE ............................................................................................. 6 GENERAL SAFETY AND ACCIDENT PREVENTION REGULATIONS ......... 7 TRANSPORTING PASSENGERS ................................................................... 7 OPERATION ................................................................................................... 7 LEAVING THE TRACTOR .............................................................................. 8 IMPLEMENTS .................................................................................................. 8 PTO OPERATION ........................................................................................... 8 SERVICE ........................................................................................................ 9 HAZARDOUS CHEMICALS ........................................................................... 9 BASIC RULE ................................................................................................... 9
INSTRUMENTS/CONTROLS .......................................................................... 10 LEVERS AND PEDALS ................................................................................ 10 OPERATING LAMPS AND INSTRUMENTS ................................................ 15 SWITCHES ................................................................................................... 17 OPERATORS SEAT ..................................................................................... 20
OPERATING INSTRUCTIONS ....................................................................... 21 RUN IN PROCEDURE .................................................................................. 21 BEFORE STARTING THE ENGINE ............................................................. 22 STARTING THE ENGINE.............................................................................. 24 USING BOOSTER BATTERIES ................................................................... 26 DRIVING THE TRACTOR ............................................................................ 27 DIFFERENTIAL LOCK .................................................................................. 28 MECHANICAL FRONT DRIVE (MFD) .......................................................... 29 STEERING THE TRACTOR ......................................................................... 30 BRAKE VALVE FOR TRAILER ...................................................................... 31 STOPPING THE TRACTOR ......................................................................... 31 STOPPING THE ENGINE ............................................................................ 32
I
TRIM THIS EDGE
RIGHT PAGE
TRIM THIS EDGE
IDENTIFICATION NUMBERS/MACHINE COMPONENTS ............................. 4 PRODUCT IDENTIFICATION AND SERIAL NUMBERS ............................... 4 SERIAL NUMBER LOCATION ....................................................................... 5
Template Name: OM_1_col Template Date: 1994_05_26
TO THE OWNER ............................................................................................... 1
Alt= to hide template information Alt+ to display template information
GENERAL TABLE OF CONTENTS
Template Name: OM_1_col Template Date: 1994_05_26
FIELD OPERATION ........................................................................................ 33 POWER TAKE OFF (PTO)............................................................................ 33 POWER TAKE OFF GUARDS ..................................................................... 34 PTO OPERATING SAFETY ......................................................................... 35 REAR DRAWBAR ........................................................................................ 36 HEIGHT ADJUSTABLE TOW PIN ASSEMBLY ............................................. 37 THREE POINT HITCH SYSTEM .................................................................. 38 MEASURING WHEEL SLIP ......................................................................... 43 LOADS MATCHED TO TRACTOR .............................................................. 46 ROLL OVER PROTECTIVE STRUCTURE .................................................. 47 HYDRAULIC SYSTEM ................................................................................. 50 TRANSPORTING AND TOWING IMPLEMENTS ........................................ 55 AUXILIARY VALVES .................................................................................... 56 SELF SEALING BREAKAWAY COUPLING ................................................. 62 TOWING AND TRANSPORTING TRACTOR ............................................... 63
TRIM THIS EDGE
TIRES/WHEELS/SPACING/BALLAST .......................................................... 64 TIRE AND WHEEL EQUIPMENT ................................................................. 64 LOAD INDEX CHART ................................................................................... 67 TIRE PRESSURES ....................................................................................... 68 FRONT WHEEL TREAD WIDTHS ............................................................... 70 REAR WHEEL TREAD WIDTHS .................................................................. 74 BALLASTING ................................................................................................ 76
Alt= to hide template information Alt+ to display template information
LUBRICATION/MAINTENANCE .................................................................... 78 HOURMETER ............................................................................................... 79 LUBRICANT SPECIFICATIONS .................................................................. 80 LUBRICATION CHART ................................................................................ 83 LUBRICATION CHART (MFD) ..................................................................... 85 ENGINE OIL ................................................................................................. 86 TRANSMISSION HYDRAULIC OIL .............................................................. 89 MECHANICAL FRONT DRIVE (MFD) DIFFERENTIAL ............................... 94 PREVENTITIVE MAINTENANCE................................................................... 96 INITIAL SERVICING....................................................................................... 98 ROUTINE SERVICING SCHEDULE ............................................................ 102 10 HOURS OR DAILY ................................................................................ 103 150 HOUR MAINTENANCE ....................................................................... 104 300 HOUR MAINTENANCE ....................................................................... 107 600 HOUR MAINTENANCE ....................................................................... 110 1000 HOUR MAINTENANCE ..................................................................... 111
II
TRIM THIS EDGE
LEFT PAGE
SPECIFICATIONS ......................................................................................... 121 GENERAL SPECIFICATION ...................................................................... 121 2120V AND 2120E SPECIFICATION ......................................................... 125 2130V AND 2130E SPECIFICATION ......................................................... 126 2140V AND 2140E SPECIFICATION ......................................................... 127 2150V AND 2150E SPECIFICATION ........................................................... 128 APPROXIMATE TRACTOR SPEEDS ........................................................ 129 APPROXIMATE DIMENSIONS 2WD VINEYARD MODELS ...................... 133 APPROXIMATE DIMENSIONS MFD VINEYARD MODELS...................... 134 APPROXIMATE DIMENSIONS 2WD NARROW MODELS.......................... 135 APPROXIMATE DIMENSIONS MFD NARROW MODELS.......................... 136
Template Name: OM_1_col Template Date: 1994_05_26
DETAIL INDEX .............................................................................................. 137
TRIM THIS EDGE
MACHINE STORAGE .................................................................................... 119 STORAGE PREPARATION ........................................................................ 119 REMOVING FROM STORAGE .................................................................. 120
Alt= to hide template information Alt+ to display template information
ELECTRICAL SYSTEM ................................................................................ 115 HEAD LAMPS (SEALED BEAM UNIT) ....................................................... 115 REAR WORK LAMP ................................................................................... 116 DIRECTION STOP AND TAIL LAMP ......................................................... 117 FUSES ........................................................................................................ 118
III
TRIM THIS EDGE
RIGHT PAGE
Template Name: OM_1_col Template Date: 1994_05_26
TRIM THIS EDGE
THIS PAGE HAS BEEN LEFT BLANK INTENTIONALLY
Alt= to hide template information Alt+ to display template information
IV
TRIM THIS EDGE
LEFT PAGE
TO THE OWNER
DP98G036
Alt= to hide template information Alt+ to display template information
TRIM THIS EDGE
2120, 2130, 2140, 2150 Pro TRACTORS
Template Name: OM_1_col Template Date: 1994_04_29
Dealer Stamp
Manufacturer: CASE UNITED KINGDOM LIMITED Wheatley Hall Road Doncaster South Yorkshire DN2 4PG ENGLAND
1
TRIM THIS EDGE
RIGHT PAGE
TO THE OWNER
How To Use This Manual Template Name: OM_1_col Template Date: 1994_04_29
Read this manual before you start the engine or operate your tractor. If you need any more information, see your Case dealer. This manual contains important information about the safe operation, adjustment and maintenance of your Case Tractor. To help you find information easily this manual has been separated into chapters, as shown in the General Table of Contents. The operation of the tractor has been separated into four main chapters:
TRIM THIS EDGE
1. INSTRUMENTS/CONTROLS - Showing the location of all controls. 2. OPERATING INSTRUCTIONS - General information for every day tractor operation, e.g. starting/stopping the tractor, operating the transmission etc. 3. FIELD OPERATION - Information for various operations specifically for use in the field, e.g. 3 point hitch, rear PTO etc. 4. TIRES/WHEELS/SPACING/BALLAST - Adjustments for various tractor operating applications, e.g. tire pressures, tread widths etc. The maintenance of the tractor has been separated into two main chapters: 1. LUBRICATION/MAINTENANCE - Hourly service intervals. 2. ELECTRICAL SYSTEM - General electrical service information. IMPORTANT: Refer to the Detail Index at the end of this manual for locating specific items about your machine.
Alt= to hide template information Alt+ to display template information
The right and left of the tractor in this manual are the same as your right and left when sitting in the tractor seat looking forward. DO NOT operate or permit anyone to operate or service this machine until you or the other persons have read this manual. Use only trained operators who have demonstrated the ability to operate and service this machine correctly and safely. This tractor, with standard equipment and authorized attachments, is intended to be used for farming, etc. DO NOT use this machine for any application or purpose other than those described in this manual. Consult an authorized dealer or the Case Corporation on changes, additions or modifications that can be required for this machine to comply with various country regulations and safety requirements. Unauthorized modifications will cause serious injury or death. Anyone making such unauthorized modifications is responsible for the consequences. 2
TRIM THIS EDGE
LEFT PAGE
TO THE OWNER
Keep the Operators Manual stored in the manual compartment if equipped on this machine or keep it in a safe place with other machine documentation. Make sure this manual is complete and in good condition. Contact your dealer to obtain additional manuals or for any further information or assistance about your machine. Your dealer has technicians with special training that know the best methods of repair and maintenance for your tractor. IMPORTANT: This operators manual is part of your tractor. If the tractor is sold, loaned or rented, the operators manual MUST go with it.
Declaration of Conformity
TRIM THIS EDGE
This tractor complies with the provisions of directive (89/336/EEC):
Template Name: OM_1_col Template Date: 1994_04_29
- Electromagnetic Compatibility.
Alt= to hide template information Alt+ to display template information
Manual Storage
3
TRIM THIS EDGE
RIGHT PAGE
IDENTIFICATION NUMBERS
PRODUCT IDENTIFICATION AND SERIAL NUMBERS Template Name: OM_1_col Template Date: 1994_04_29
Write your machine Model number, Product Identification Number (P.I.N.), and Serial numbers on the lines provided below. If needed, give these numbers to your Case dealer when you need parts or information for your machine. Make a record of the numbers. Keep the record and your Manufacturers Statement of Origin in a safe place. If the machine is stolen, report the numbers to your local police. Complied in this manual are the operating and maintenance instructions for the 2120, 2130, 2140, 2150 V AND E agricultural tractor models. When in need of service parts always supply the tractor, transmission and engine serial numbers, including prefix and suffix letters. If information is required that is not available in this manual see your nearest authorized CASE DEALER.
Transmission Serial Number TRIM THIS EDGE
EXAMPLE 587AB AG AF
000100
587 is the base code and the suffix letters denote the build of the unit: 1st suffix AB = 2 wheel drive AC = 4 wheel drive 2nd suffix AG = ROPS AH = CAB 3rd suffix AC = 30 km/h AF = 40 km/h
Alt= to hide template information Alt+ to display template information DS98F310
4
TRIM THIS EDGE
LEFT PAGE
IDENTIFICATION NUMBERS
DP98B223
DP98B222
MFD AXLE SERIAL NUMBER PLATE (E MODELS)
TRIM THIS EDGE
MODEL AND PRODUCT IDENTIFICATON NUMBER PLATE
Alt= to hide template information Alt+ to display template information
Serial Number Location
DP98B223
F00401
F00404
TRANSMISSION SERIAL NUMBER
For ready reference write the serial numbers of your machine in the spaces below. TRACTOR MODEL NUMBER ................................................................................. PRODUCT IDENTIFICATION NUMBER ................................................................. ENGINE SERIAL NUMBER .................................................................................... TRANSMISSION SERIAL NUMBER....................................................................... MECHANICAL FRONT DRIVE AXLE SERIAL NUMBER ....................................... 5
TRIM THIS EDGE
RIGHT PAGE
Template Name: OM_1_col Template Date: 1994_04_29
TRANSMISSION SERIAL NUMBER
ENGINE SERIAL NUMBER
SAFETY/DECALS
!
SAFETY
!
Template Name: OM_1_col Template Date: 1994_04_29
Before operating, read and comply with the operators manual and safety instructions. Understand that your safety and the safety of other persons is measured by how you service, and operate this machine. Know the positions and operations of all controls before you try to operate. MAKE SURE YOU CHECK ALL CONTROLS IN A SAFE AREA BEFORE STARTING YOUR WORK. READ THIS MANUAL COMPLETELY and make sure you understand the controls. All equipment has a limit. Make sure you understand the speed, brakes, steering, stability, and load characteristics of this machine before you start to operate. The safety information given in this manual does not replace safety codes, insurance needs, federal, state and local laws. Make sure your machine has the correct equipment needed by the local laws and regulations. CASE is continuing to work for your safety: by making tractors with better protection and by giving these rules for safe operation. TRIM THIS EDGE
!
THIS SAFETY ALERT SYMBOL INDICATES IMPORTANT SAFETY MESSAGES IN THIS MANUAL. WHEN YOU SEE THIS SYMBOL CAREFULLY READ THE MESSAGE THAT FOLLOWS AND BE ALERT TO THE POSSIBILITY OF PERSONAL INJURY OR DEATH. M171B
Alt= to hide template information Alt+ to display template information
INTENDED USE This Case tractor is designed solely for use in customary agricultural or similar operation (intended use). Use in any other way is considered as contrary to the intended use. The manufacturer accepts no liability for any damage or injury resulting from this misuse and these risks must be born solely by the user. Compliance with and strict adherence to the conditions of operation, service and repair as specified by the manufacturer also constitutes essential elements for the intended use. This Case tractor should be operated, serviced and repaired only by persons familiar with all its particular characteristics and acquainted with the relevant safety rules (accident prevention). The accident prevention regulations, all other generally recognized regulations on safety and occupational medicine and the road traffic regulations must be observed at all times. Any arbitrary modifications carried out on the tractor will relieve the manufacturer of all liability for any resulting damage or injury. 6
TRIM THIS EDGE
LEFT PAGE
!
the general safety and accident prevention regulations. ● Always comply with local traffic regulations when driving on public roads. ● Before starting work, familiarize yourself with all the controls and instruments and their functions. During work is too late. ● Start the engine only from the operator’s seat. ● Never attempt to start engine by shorting across the starting motor terminals as the machine may immediately start to move. ● Before moving away, always check the immediate vicinity of the machine (e.g. for children). Ensure adequate visibility. ● Never run the engine in a closed building. Proper ventilation is required. ● Clothing worn by the operator must be close-fitting. Avoid wearing loose jackets, shirts or ties. ● Handle fuel with care as it is highly flammable. Never refuel the machine in the vicinity of naked flames or sparks. Do not smoke during refuelling. ● Always stop the engine and remove the main switch key before refuelling. Fill fuel tank outdoors. Clean up any spilled fuel immediately. ● Prevent fires by keeping the machine clean. ● Take care when handling battery acid (toxic and corrosive).
! TRANSPORTING PASSENGERS
!
● Passengers may only be carried if a proper passenger seat is fitted. ● The carrying of passengers is otherwise not permitted.
! OPERATION
!
● Always adapt your ground speed to the ground conditions. Avoid making sharp turns when driving up or down slopes or when driving across the slope. Do not attempt to turn the machine with the differential lock engaged. When driving down slopes, never depress the clutch and change gear.
● Attach trailers and/or implements correctly. The operating, steering and braking behavior will be affected by attaching implements, trailers and ballast weights. Therefore ensure adequate steering and braking power.
● Observe maximum permissible axle loads and total weights. ● When making turns with towed or mounted implements, always take into consideration the width and inertia of the implement. 7
TRIM THIS EDGE
RIGHT PAGE
TRIM THIS EDGE
● In addition to the instructions contained in this operator’s manual, also observe
Template Name: OM_1_col Template Date: 1994_04_29
!
GENERAL SAFETY AND ACCIDENT PREVENTION REGULATIONS
Alt= to hide template information Alt+ to display template information
SAFETY/DECALS
SAFETY/DECALS
! LEAVING THE TRACTOR
!
Template Name: OM_1_col Template Date: 1994_04_29
● When leaving the tractor, ensure that it will not roll away (apply park brake, wheel wedges) stop the engine.
● Remove the main switch key and lock the operator’s cab (when equipped). ● Never leave the tractor unattended as long as the engine is still running. ● Never leave the operator’s platform/cab when driving. ● Lower implement or equipment to the ground before leaving the tractor.
! IMPLEMENTS
!
● Attach implements and trailers to the tractor only using the prescribed drawbars or hitches.
TRIM THIS EDGE
● Take particular care when attaching trailers or implements. ● Prevent trailer and implement from rolling away. ● Operate tractor only when all guards are fitted and in their correct position.
! PTO OPERATION
!
● Always shut off engine before connecting or disconnecting drive shaft. ● When operating the PTO, no-one must be allowed to remain in the vicinity of
Alt= to hide template information Alt+ to display template information
the rotating PTO stub shaft or drive shaft.
● Guards for drive shaft and PTO stub shaft must be fitted. ● High-inertia implements do not become stationary immediately when PTO is disengaged. Allow sufficient time for implement to “coast down” to a halt before cleaning or adjusting.
● As soon as drive shaft has been removed, install guard over PTO stub shaft.
8
TRIM THIS EDGE
LEFT PAGE
SAFETY/DECALS
!
● Do not service the tractor with the engine running. Follow the instructions in this manual or see your dealer.
● Escaping fluid (fuel or hydraulic oil) under high pressure can penetrate the skin and cause serious injury. If any fluid is injected into the skin, consult a doctor immediately as other-wise serious infections may result.
● Dispose of oil, fuel and filters in accordance with local regulations. Do not drain the oil on the ground or into a drain. Be responsible for the environment.
● Do not attempt to mount a tire unless you have the proper equipment and experience to perform the job safely. See section TIRES/WHEELS/SPACING/ BALLAST.
● Retighten wheel nuts after the specified hours in this manual. ● Always disconnect the battery ground strap(s) before carrying out any ● Use original manufacturers parts. Spare parts/service parts must comply with the manufacturers technical specifications.
! HAZARDOUS CHEMICALS ! ● If you are exposed to or come in contact with hazardous chemicals, you can
TRIM THIS EDGE
electrical repairs on the machine.
Alt= to hide template information Alt+ to display template information
! SERVICE
be seriously injured. The fluids, lubricants, paints, adhesives, coolants, etc., used with your machine can be hazardous. always remember the environment. DO NOT put oil or fluids into the ground or into containers that can leak.
● Check with your local environmental or recycling center or your dealer for correct disposal information.
! BASIC RULE
!
● Always check the operating and road safety of the tractor before starting.
9
TRIM THIS EDGE
RIGHT PAGE
Template Name: OM_1_col Template Date: 1994_04_29
● Before you service the machine and dispose of the old fluids and lubricants,
INSTRUMENTS/CONTROLS
INSTRUMENTS/CONTROLS Template Name: OM_1_col Template Date: 1994_04_29
OPERATING CONTROLS Levers and Pedals 2 4 5 3 1 TRIM THIS EDGE
9 6 7
Alt= to hide template information Alt+ to display template information
8 F00406
1. BRAKE PEDALS - The left Pedal stops the Left Rear tractor wheel and the Right pedal stops the Right Rear tractor wheel. For safe operation the pedals must be applied at the same time with the pedal interlock so that both brakes can be applied at the same time. Use the pedals separately only for making sharp Left or Right turns in the field.
!
CAUTION: Brake pedals must be locked together for road travel. This will insure uniform brake application and maximum stopping ability.
!
WARNING: Extra weight and bad traction conditions such as mud or ice increase you stopping your distance. Remember that liquid in the tires, weight on the machine or wheels, tanks filled with fertilizer, herbicides or insecticides all these add weight and increase the distance you need in which to stop. 10
TRIM THIS EDGE
LEFT PAGE
3. CLUTCH PEDAL - This pedal is used to disengage the drive between the engine and transmission. The clutch is disengaged when the pedal is pressed fully down. 4. PTO CLUTCH LEVER - This lever is used to disengage the drive between the engine and the PTO drive line. The clutch is disengaged when the lever is pulled fully rearwards.
5. FORWARD AND REVERSE DRIVE LEVER - Move the lever fully forward to select forward drive and fully rearward for reverse drive. The clutch pedal must be pressed fully down before moving the lever. 6. ACCELERATOR PEDAL - The accelerator pedal is used when making frequent changes of engine or tractor speed. Pressing down on the pedal will increase speed. The engine speed control lever must be set to give the slowest engine speed required when the accelerator pedal is to be used. 7. PARKING BRAKE LEVER - This lever is used to lock the transmission after the tractor has stopped. The brake is engaged when the brake lever is pulled up toward the operator. The brake is released by pressing the button on the end of the lever and moving the lever down. THE PARKING BRAKE MUST BE COMPLETELY RELEASED BEFORE MOVING THE TRACTOR. 8. DIFFERENTIAL LOCK PEDAL - Your tractor has a differential lock that will make both rear wheels turn at the same speed. The differential lock prevents loss of power when the traction of the rear wheels is not equal. It also provides a straight line steering aid when opening up the field and to control implement overlap.
!
WARNING: Ensure that the differential lock is disengaged before making turns or travelling on the highway.
9. TRANSMISSION RANGE LEVER - This lever has 3 positions: Forward is low range, rearward is high range, to the right and forward is lower range.
11
TRIM THIS EDGE
RIGHT PAGE
TRIM THIS EDGE
NOTE: Do not hold the lever at the offset position for long periods. This will cause excessive wear on the PTO clutch disc and bearing.
Template Name: OM_1_col Template Date: 1994_04_29
2. ENGINE SPEED CONTROL LEVER - This lever controls the speed of the engine. When set in any position, speed will not change even if the load varies. Moving the lever rearward will increase engine speed.
Alt= to hide template information Alt+ to display template information
INSTRUMENTS/CONTROLS
INSTRUMENTS/CONTROLS
Template Name: OM_1_col Template Date: 1994_04_29
10 15 13
11
14 12
TRIM THIS EDGE
F00406
Alt= to hide template information Alt+ to display template information
10. TRANSMISSION SPEED LEVER - The speed lever operates in an <<H>> pattern. The central position of the lever is NEUTRAL. Move the lever to the left and forward from neutral to select FIRST gear. Move the lever to the left and rearward from neutral to select SECOND gear. Move the right and forward from neutral to select THIRD gear. Move the lever to the right and rearward from neutral to select FOURTH gear. 11. PTO LEVER - This lever, mounted on left hand mudguard, has 3 positions. The central position is neutral, the rearward position is for standard PTO speed, the forward position is for ground PTO speed. PTO Reduction lever (if equipped) - Mounted on the rear of the transmission. This lever is used to select 540/1000 rmp or 540/750 rpm PTO speeds. 12. MECHANICAL FRONT DRIVE (MFD) LEVER (only on 30km/h transmission) - This lever is located to the left of the operators seat. MFD can be engaged or disengaged on the move, but make sure that neither rear wheel is slipping. Anticipate the need for MFD and engage when minimum torque is being used while the tractor is moving slowly. Move the lever fully rearward in the slot to engage MFD and fully forward to disengage. IMPORTANT: Do not use MFD for light duty draft work or when travelling on the highway.
12
TRIM THIS EDGE
LEFT PAGE
Suggest: If the above button click is invalid. Please download this document first, and then click the above link to download the complete manual. Thank you so much for reading
INSTRUMENTS/CONTROLS
14. DRAFT CONTROL LEVER - This lever governs the working depth of the implement.
Template Name: OM_1_col Template Date: 1994_04_29
TRIM THIS EDGE
15. AUXILIARY VALVES - The tractor can be fitted with two auxiliary valves. They are used to operate the hydraulic equipment of an implement.
Alt= to hide template information Alt+ to display template information
13. POSITION CONTROL LEVER - This lever is used to rise or lower the equipment on the three point linkage.
13
TRIM THIS EDGE
RIGHT PAGE