EXTENDED KEVMOR EOFY SALE CATALOGUE 2023

EOFY SALE

CATALOGUE

WWW.KEVMOR.COM.AU

Prices available till 31st of August or until sold out

E A N S P A C E P A P R

CleanSpace Ultra Power System

$1490.00 + GST

• Approved PAPR with HEPA filtration

• Lightweight, only weighing 400g

• Long run time (minimum 12 hours)

• Peak airflow; 230L/min

• Compatible with full/half mask and a range of particulate and gas filters

• No hoses, belts or waist mounted battery packs

• Airsensit technology

• Connectivity: Battery management, automated Mask Fit Check, Intelligent Management Filter Technology

• IP66 Rating (water tolerance)

CleanSpace Ultra Power System +

Full Face Mask - $1937.50 + GST

(also available with Half Mask (M / L) - $1660.00 + GST)

• Approved PAPR with HEPA filtration

• Long run time (minimum 12 hours)

• No hoses, belts or waist mounted battery packs

• Airsensit technology

• Connectivity: Battery management, automated Mask Fit Check, Intelligent Management Filter Technology.

• IP66 Rating (water tolerance)

• Full face mask protects the user’s face, eyes, and respiratory system

CleanSpace Pro Power System

$1161.00 + GST

• Approved PAPR with HEPA filtration

• Lightweight, only weighing 400g

• Long run time (minimum 12 hours)

• Peak airflow; 230L/min

• Compatible with full/half mask and a range of particulate and gas filters

• No hoses, belts or waist mounted battery packs

• Airsensit technology

WWW.KEVMOR.COM.AU

• Connectivity: Battery management, automated Mask Fit Check, Intelligent Management Filter Technology

Scan

Please note:

Please note that the CleanSpace Ultra & Pro Power Units are sold without filters. To ensure a complete filter system, filters will need to be purchased separately.

CleanSpace Full Face Mask

(Medium / Large) - $447.50 + GST

• Visor: Scratch-resistant & solvent-resistant coating

• Wide panoramic visor

• Silicone cushion seals for optimum protection

• Suitable for long periods of wear

• Mylar speech diaphragm for clear communication

• Positive pressure airflow prevents fogging

• Inner mask has a unique clip-in/clip-out design and is easily removed for cleaning

• Built in Adaptor for TSI portacount mask fit testing

• Spectacle & visor kits available (sold separately)

• TM3, PAPR-P3 & IP65 Rating (when used with Ultra Power Unit)

CleanSpace Half Face Mask (Medium & Large) - $170.00 + GST

• Light weight, comfortable and durable

• Soft silicone that readily molds to the face

• Available in 3 sizes – Small, Medium and Large – to facilitate a good seal and a comfortable fit

• Transparent to assist with communication

• Compatible with most cleaning and disinfection protocols

• Easily removable exhalation valve for cleaning

• Fit Test adaptor available for TSI Portacount™ fit testing

• TM3, PAPR-P3 & IP65 Rating (when used with Ultra Power Unit)

CleanSpace CST High Capacity

Particulate Filter - $201.50 + GST (3 pack)

• CleanSpace CST Particulate Filters TM3 P3 are suitable for protection against airborne particulates (dust, mists, fumes) with a particulate filtration efficiency ≥ 99.97%

• Compatible with the CleanSpace Pro Power Unit & CleanSpace Ultra Power Unit

• Optimal Filter usage target is assisted by AirSensit™ Technology

• Fitted with a near-field communication chip Collects and transfers filter usage data to the CleanSpace Smart App via the power unit firmware

CleanSpace CST ABEK1 P3 SL R

Combined Filter - $170.00 + GST

• CleanSpace CST ABEK1P3 Combined Filters are suitable for protection against airborne particulates (dust, mists, fumes), organic and inorganic gases or vapours, solvents ammonia and sulphur dioxide (boiling point > 65°C)

• Compatible with the CleanSpace Pro Power Unit & CleanSpace Ultra Power Unit

• Optimal Filter usage target is assisted by AirSensit™ Technology

• Fitted with a near-field communication chip Collects and transfers filter usage data to the CleanSpace Smart App via the power unit firmware

A N S P A C E P A P R

JANSER Junior Electric Ride-On Floor Scraper

$34,995.00 + GST

Top Features:

• Light weight & light enough to go in a lift weight 420kg

• Easily Fits through Doorways width 610mm

• Continues run time (no need to charge batteries) just plug in and go

• Can remove, carpet, VCT, sheet vinyl, timber flooring & ceramic tiles

Special Features:

• Net Weight: 320kg

• Gross Weight: 420kg

• Working Speed up to 37m/min

• Light-Touch Steering Levers

• Zero-Turn Radius

WWW.KEVMOR.COM.AU

Easily remove floors of all types: Ceramic, Timber & Hardwood Floors, Concrete Floors, Carpet & Carpet Tiles, Resilient Floor Coverings, Rubber, Adhesive Residue plus much more.

JANSER FLOORING EQUIPMENT

JANSER

All Day Battery Ride-On Floor Scraper

+ GST

Main Features:

• Most powerful battery powered ride-on stripper

• Very quiet operation without exhaust gases and no blade vibration

• Extremely robust construction

• Very precise operation

• Charger securely installed in the back of the machine

• LED charge display

• Increased torque with low Amp motor

• Adjustable comfort seat

• Hydraulic slide plate & cylinder/deflector plate included

• Higher Speed and increased weight allow at least 30% more productivity

• Hydraulic front angle plate for quick and precise modification of the til

Easily remove floors of all types: Ceramic, Timber & Hardwood Floors, Concrete Floors, Carpet & Carpet Tiles, Resilient Floor Coverings, Rubber, Adhesive Residue plus much more.

JANSER FLOORING EQUIPMENT

$9,995.00 + GST

• Improved direct drive hydraulics & an extremely low noise level in operation

• Adjustable guide handle

• Weights are easily removed

• Forward and Reverse

• NEW - Wheel hubs with freewheel option for easy handling and easy pushing of the machine without power

• Variable speed control

• Supplied with 5 different blade profiles

Power Supply 230V

Speed 0-16 m/min

Total Weight 105 kg

Net Weight 75kg

$13,728.00 + GST

The powerful motor combined with the new HYDRAULIC DIRECT-DRIVE system ensures high performance output at a very low noise level.

• More torque for those tougher jobs, i.e. Timbers, Ceramics

• Has adjustable guide handle (6 positions)

• Weights can be easily removed for easy transport

• Forward and Reverse

• Self-propelled, variable speed control

• Supplied with 5 different blade

Power Supply 230V

WWW.KEVMOR.COM.AU

Speed 0-23 m/min

Total Weight 190 kg

Net Weight 85 kg

JANSER Master Mobil III Walk Behind Floor Scraper

JANSER Strato Mobil IV Walk Behind Floor Scraper

Janser Floor Scraper Blades, Shanks & Holders

JANSER FLOORING EQUIPMENT

JANSER Scrap’Air Pneumatic Floor Chisel - Long Version

$2,395.00 + GST

High-performance air-powered scraper suitable for floor coverings, foam backing residues, adhesive residues, linoleum, tiles and rubber as well as laminate and parquet.

Compressor minimum specifications to operate the tool effectively:

• 6-8 bar ( 90 – 115 PSI)

• Compressor must have a minimum of 295 litres per minute filling capacity

Specifications

Air Pressure 6 - 8 bar

Air Consumption 280 L/min

Frequency 2950 blows/min

Power 30 joules

Weight 5.3 kg

Length 119 cm

Optional Extra Accessories

• 111 085 230 - Blade serrated 20 cm

• 111 085 240 - Blade Spring steel

• 111 085 220 - Delta chisel 12cm, curved

• 111 085 250 - Air pressure hose

JANSER Scrap’Air Pneumatic Floor Chisel - Short Version

$2,100.00 + GST

High-performance air-powered scraper suitable for floor coverings, foam backing residues, adhesive residues, linoleum, tiles and rubber as well as laminate and parquet.

Compressor minimum specifications to operate the tool effectively:

• 6-8 bar ( 90 – 115 PSI)

• Compressor must have a minimum of 295 litres per minute filling capacity

Specifications

Air Pressure 6 - 8 bar

Air Consumption 280 L/min

Frequency 2950 blows/min

Power 30 joules

Weight 5.3 kg

Length 53 cm

JANSER Compact Hand Held Stripper 18V

$1,570.00 + GST

Remove floor coverings is challenging to reach places with the Janser Compact Stripper 18V. In comparison to using heavier, hand-held, cable-connected hand stripping equipment, the Compact Stripper 18V is also considerably more practical for redoing surfaces near inspection covers, cable ducts, along walls, or in corners.

Included:

• Compact Stripper

• 2x battery 5.0 Ah 18V

• 1x charging station 230V

• Supplied in carry case with safety goggles and protective gloves

Universal Flooring Solutions (UFS65) Tornado Floor Stripper

$1,995.00 + GST

The Universal Flooring Solutions UFS65 Tornado Stripper is designed and used to remove adhered old floor coverings, including commercial vinyl, linoleum, vinyl planks, PVC, broadloom carpet and carpet tiles. With the 8”/ 200mm scraper blade this electric scraper is defined as a multi-purpose surface preparation machine excelling on small, medium, and large-sized areas.

Blades Included: 1 x Standard & 1 x Heavy Duty

Specifications

Power 2200 W

Weight 14.5 kg

HUSQVARNA

$36,460.52

(Weight and LED light kit not included)

The PG 690 is a versatile and powerful floor grinder but still compact enough to pass through a standard door. This is the go-to choice for most grinding jobs, both industrial and commercial, and for users that prefer a non-motorised drive.

• Enhanced Dual Drive Technology

• Adjustable Grinding Pressure

• Protected Electronics - sealed cabinet

• Low Maintenance, Smooth Operation

Specifications

Voltage 380 - 415 V

HUSQVARNA

Grinder

$49,242.77

(Weight and LED light kit included)

The PG 690 RC is a remote controlled, powerful floor grinder but still compact enough to pass through a standard door (670mm). The remote control sets the operator free to manage hoses and cables while still grinding, for up to 40% higher productivity.

• Sealed to last - 1000 hours service intervals

• Adjustable Grinding Pressure

• Dual Drive Technology

• Protected Electronics - dust sealed electrical cabinet

Specifications

WWW.KEVMOR.COM.AU

Phases 3

Pins 3P+E

Grinding Disc Diameter 270 mm

Direction of Rotation Independent (FWD/REV) No. Grinding Disc 3

Length 1300 mm

Width 670 mm

Height 1150 mm

Weight 502 kg

Voltage 380 - 415 V

Phases 3

Pins 3P+E

Grinding Disc Diameter 270 mm

Direction of Rotation Independent (FWD/REV) No. Grinding Disc 3 Length 1320 mm Width 670 mm

1155 mm Weight 678 kg (with weight & light kit)

U S Q V A R N A G R I N D E R S

PG 690

Planetary Floor

PG 690 RC (Remote Controlled)

Planetary Floor Grinder

+ GST

+ GST

Scan the QR Code to find out more about the Husqvarna PG690 Grinder

Scan the QR Code to find out more about the Husqvarna PG690RC Grinder

V A R N A G R I N D E R S

$3,562.00 + GST

The PG 280 is a single disc floor grinder that you can quickly convert for edge grinding on both sides. It efficiently grinds adhesives, paint, epoxy and spackle. With a grinding width of 280 mm it is suitable for small to medium concrete areas.

• Quickly Conversion to Edge Grinding

• Easy to Transport and Set-up

• Reduced Vibrations

• Easy to Use - fixed speed and no settings

• East Removal - adhesive, paint, epoxy and spakle

Voltage 220-240 V

Amps 10

Pins 3

Phases 1

Grinding Disc Diameter 280mm

Disc Speed Max. 1410 rpm

Number of disc 1

Length of Product 1320 mm

Width of Product 420 mm

Height of Product 990 mm

Weight 72 kg

$9,702.30 + GST

The PG 510 is a planetary floor grinder with three grinding discs. It is suitable for removing coatings, grinding and polishing concrete, etc. The grinding head on the PG 510 is effectively sealed to keep dust and moisture out. This greatly extends the lifetime of the bearings and belts. Suitable for both professional and semi-professional work.

• Efficient Dust Management

• Quick Release Couplings

• Sealed Grinding Head

• Hour Meter from Rentals

Voltage 220-240 V

WWW.KEVMOR.COM.AU

Phases 1

Pins 2

Grinder Width 515 mm

Direction of Rotation One-direction

Disc Speed Max. 542 rpm

Grinding Pressure 66 kg

Number of Disc 3

Length of Product 1525 mm

Width of Product 555 mm

Height of Product 950 mm

Weight 120 kg

NEW HUSQVARNA PG 280 (10amp) Edge/Floor Grinder

HUSQVARNA PG 510 Planetary Floor Grinder

Edge Grinding

Scan the QR Code to find out more about the Husqvarna PG280 Grinder

Scan the QR Code to find out more about the Husqvarna PG510 Grinder

$15,075.12 + GST

(Weight kit not included)

The PG 540 is a single phase, compact and versatile planetary floor grinder, perfect for smaller jobs. It combines a smart compact design for easy transportation with real work-horse performance and sheer grinding power.

• Electronic Components Protected Against Dust and Slurry

• Suitable for floor prep, grinding and polishing

• Split-chassis design for easy transport

• Hour and RPM Meter

• Efficient Dust Management

Voltage 220-240 V

Phases 1

Pins 2P+E

Grinding Width 515 mm

Direction of Rotation Both Direction

Number of Discs 3

Length of Product 1015 mm

Width of Product 560 mm

Height of Product 735 mm

Weight 169 kg

$4,999.00 + GST

The ROLL floor grinding machine RO-300 sets new standards in surface preparation. Whether removing floor covering residues, adhesive residues, leveling compounds or floor coatings - regardless of what you find after removing the floor covering - with the floor grinding machine RO-300 you can prepare the surface quickly and effectively.

• Soft start and low power consumption, therefore no triggering of fuses on weakly secured construction sites

• Effortlessly working due to the smooth running of the machine

• Dustfree working with the integrated dust extraction device

• Easy transport due to compact dimensions and a foldable drawbar

• Individual billing with the integrated hour meter

• Long service life and effectiveness of the tools Made in Germany

Working Power 2200 W / 230 V Rotation 1650 rpm

Working Width 300 mm

Weight 63 kg

O O R G R I N D E R S

HUSQVARNA PG 540 Planetary Floor Grinder

Roll Gmbh - RO300 + Redilock Plate Floor Grinder Machine Kit

Scan the QR Code to find out more about the Husqvarna PG690RC Grinder

Scan the QR Code to find out more about the ROLL RO-300 Floor Grinder

A I R I O N I Z E R S

JANSER Air IonBox 400 Air Ionizer

$5,852.85 + GST

Ionization can reduce the level of dust particles by up to 95%. Made in Sweden, the IonBox 400 cleans your work environment air by making contaminants fall to the ground.

Reduce dust particles by up to 95% with an air ionizer.

Use this new unique technology from Janser. The versatility of the Janser IonBox makes it suitable for many job sites including construction sites and demolition contractors, renovation work, food processing facilities, schools, anyone generating dust on their job site, and more.

Clean air is right for any environment. Air Ionizers are a great way to help keep your air healthy.

Technical Specifications:

Volume up to 400m2

Weight 20 kg

Power 220 W

Dimensions 370 x 500 x 580 mm

JANSER Air IonBox 1000 Air Ionizer

$7,500.00 + GST

Ionization can reduce the level of dust particles by up to 95%. Made in Sweden, the IonBox 1000 cleans your work environment air by making contaminants fall to the ground.

Reduce dust particles by up to 95% with an air ionizer.

Use this new unique technology from Janser. The versatility of the Janser IonBox makes it suitable for many job sites including construction sites and demolition contractors, renovation work, food processing facilities, schools, anyone generating dust on their job site, and more.

Clean air is right for any environment. Air Ionizers are a great way to help keep your air healthy.

Technical Specifications:

Volume up to 1000m2

Weight 55 kg

Power 220 W

Dimensions 520 x 730 x 640 mm

Scan the QR Code to find out more about the Janser Columbus Floor

$5,450.00 + GST

The correct speed for floor prep. Perfect for opening up over burnished concrete subfloors, sanding back skim coat/feather/levelling compound, sanding and removing old adhesive including pressure sensitive adhesive PSA.

This machine will mill, grind, and sand your floor surface while creating a minimum of dust, helping to maintain a healthier working environment.

The 3-gear planetary transmission is designed to cope with the toughest tasks.

Kit includes

• Columbus 145SH

• Hex Drive Plate with 6 diamond segments

• Standard Pad mounting plate

• Dual Dust extraction ring (2 dust ports)

Technical Specifications:

Power Supply 230 V

Motor Power 1500 W / 2 HP

Working Width 375 mm

Speed 140 rpm

Weight 42 kg

6 Diamond Segment

$1,857.00 + GST

The Janser Hexa 6 segment plate is perfectly suited for grinding hard surfaces such as concrete or levelling compounds.

Large area coverage makes this plate more effective than other diamond plates, especially when grinding plaster and anhydrite screed.

JANSER Trivo Disc Plate Parquet Floor Attachment

$2,690.00 + GST

WWW.KEVMOR.COM.AU

Floor sanding attachment for fine sanding of parquet floors.

• Quiet and consistent operation by belt-driven technology

• Small holes in the 3 discs as well as in the sandpaper prevent clogging and guarantee a high finish surface quality. By avoiding too much temperature a longer lifespan of the abrasive is ensured for reduced material cost per job

• Open construction for optimized vacuum performance

O R S A N D E R

JANSER Columbus Floor Sander

JANSER Hexa Plate

Hexa Plate

Trivo Disc Plate

Sander

X T R A C T O R S

This adaptable H-class dust extractor is portable, lightweight, and powerful. It has an e-flow function that automatically changes the air flow, providing stable air flow and increasing the time between filter cleanings, as well as a user-friendly HMI that monitors performance. High water protection makes disinfection quick and effective. Additionally, it has inbuilt connectivity, which enables you to quickly track location, run-time, service, filter, and other important usage statistics.

It has a HEPA filter inside that is separate from the pre-filter and has EN1822 certification.

Phases 1

WWW.KEVMOR.COM.AU

Voltage 230 V

Rated Current 5 A

Max. Vacuum 200 mbar

Rated Input Power 1.1 kW

Length of Product 670 mm

Width of Product 400 mm

Height of Product 1000 mm

Weight 25 kg

This versatile H-class dust extractor is compact and easy to transport, yet powerful. Its three-stage filtration process including large filter surfaces enables long run-time between filter cleanings. Its high water protection allows fast and efficient decontamination.

It has a HEPA filter inside that is separate from the pre-filter and has EN1822 certification. When the filter has to be cleaned, the incorporated alert lets the user know. Simply clicking a button will start the cleaning process.

The easy-to-use, Longopac® attachment system and a V-shaped tray ensures easy mounting

Phases 1

Voltage 230 V

Rated Current 4 A

Max. Vacuum 200 mbar

Rated Input Power 1.1 kW

Length of Product 670 mm

Width of Product 400 mm

Height of Product 1000 mm

Weight 25 kg

HUSQVARNA DE110a H-Class HEPA Dust Extractor

HUSQVARNA DE110s H-Class HEPA Dust Extractor

$2,540.12 + GST

$2,307.36 + GST

Scan the QR Code to find out more about the Husqvarna DE110A Dust Collector

Scan the QR Code to find out more about the Husqvarna DE110S Dust Collector

$4,032.36 + GST

This adaptable H-class dust extractor is portable, lightweight, and powerful. It is made to work with bigger hand-held power equipment including floor and hand grinders, shot blasters, scarifiers, and other similar devices.

The DE 120 is the best choice for demanding, heavy-duty applications thanks to its performance and durability. It has a user-friendly HMI and an e-flow function that regulates air flow automatically while guaranteeing long battery life.

Due to its strong water protection, decontamination may be done quickly and effectively.

Phases 1

Voltage 230 V

Rated Current 15 A

Max. Vacuum 200 mbar

Rated Input Power 2.2 kW

Length of Product 815 mm

Width of Product 542 mm

Height of Product 1125 mm

Weight 39 kg

$5,506.20 + GST

The Husqvarna S 36 is a very powerful single-phase HEPA dust extractor to match the PG 530 (1-phase), PG 450 and PG 280 grinding machines as well as small to mid size scarifiers, grinders, shot blasters and handheld power tools.

• Three large, commercial grade motor

• Three independently tested and certified HEPA H13 filters

• Massive cone-shaped pre-filter with 4.5m2 media

• Superior dust collection

• Jet pulse pre-filter cleaning

• Hour counter and vacuum meter

Phases 1 Voltage 230 V

Rated Current 15.7 A

Max. Vacuum 220 mbar

Rated Input Power 3.6 kW Air Requirement 600 m3/h

Length of Product 830 mm

Width of Product 620 mm

Height of Product 1500 mm Weight 63 kg

U S T E X T R A C T O R S

HUSQVARNA DE120 H-Class HEPA High Power Dust Extractor

HUSQVARNA S36 H-Class HEPA Dust Extractor

Scan the QR Code to find out more about the Husqvarna DE120 Dust Collector

Scan the QR Code to find out more about the Husqvarna S36 Dust Collector

T E X T R A C T O R S

T 7500 is an effective industrial dust extractor to match the grinding machines Husqvarna PG 690 and PG 400 (3-phase) as well as shavers, shot blasters and saws. Ideal for heavy-duty work and exacting demands on dust extraction.

• Highly Efficient Filtration System

• Can deal with grinding dust and demolition materials

• Easy Filter Cleaning

• Extremely Durable Design

• Easy-To-Read Airflow Monitoring

• Perfect for Demanding Industrial and Commercial Applications

Phases 3

Voltage 400 V

Max. Vacuum 280 mbar

HEPA Filters 2

Air Requirements 600 m3/h

Length of Product 1245 mm

Width of Product 686 mm

Height of Product 1753 mm

Weight 206 kg

T 10000 is an effective industrial dust extractor to match the highly productive Dual Drive Technology™ grinding machines Husqvarna PG 820 RC, PG 820, PG 690 RC, PG 680 as well as shavers, shot blasters and saws.

Also perfect together with our pre separator C 5500 that easily can be mounted on the dust extractor.

• Highly Efficiency Particulate Air Filter

• Long Life Filters which can deal with fine dust

• Extremely Stabile and Mobile

• Hour Counter Facilitates

• For Industrial and Commercial Applications

Phases 3

Voltage 400 V

Max. Vacuum 280 mbar

HEPA Filters 3

Air Requirements 900 m3/h

Length of Product 1400 mm

Width of Product 736 mm

Height of Product 1727 mm

Weight 336 kg

HUSQVARNA T7500 H-Class HEPA Dust Extractor

HUSQVARNA T10000 H-Class HEPA Dust Extractor

$15,103.64 + GST

$20,941.00 + GST

Scan the QR Code to find out more about the Husqvarna T7500 Dust Collector

Scan the QR Code to find out more about the Husqvarna T10000 Dust Collector

C 3000 is an effective industrial pre-separator for really big jobs where a lot of dust is produced. Recommended as a supplement to your Husqvarna dust extractors. C 3000 separates 90% of the vacuumed material before it reaches the dust extractor, which greatly increases the suction capacity, extends motor life and significantly reduces the frequency of filter maintenance, thus giving you longer operation without interruption.

• Durable Design

• Easy to Transport

• Increased Productivity

• Clean and Simple Bag Change

Power Source Manual

Container Capacity 37 L

Length of Product 590 mm

Width of Product 730 mm

Height of Product 1580 mm

Weight 22 kg

C 5500 is an effective industrial pre-separator for really big jobs where a lot of dust is produced. Recommended as a supplement to your Husqvarna dust extractor T 7500, T 8600, T 10000, T 18000 and T 8600 Propane.

C 5500 separates 90% of the vacuumed material before it reaches the dust extractor, which greatly increases the suction capacity, extends motor life and significantly reduces the frequency of filter maintenance, thus giving you longer operation without interruption.

• Durable Design

• Increased Productivity

WWW.KEVMOR.COM.AU

• Clean and Simple Bag Change

R E S E P A R A T O R S

HUSQVARNA C3000 Dust Pre

HUSQVARNA C5500 Dust Pre Separator

S E P A R A T O R S

Improved, high airflow, cyclone design eliminates suction loss and saves you time and money on pricey replacements by preventing over 99% of tiny dusts and bulk material from clogging your vacuum’s filter. The 10 Gal. Deluxe Kit includes everything you need to collect large amounts of dust!

• Up to 2x the airflow of smaller cyclones and lid-style separators

• Upgrades any make/model shop vacuum with 6.35cm hose fittings

• Neutral-vane technology improves separation efficiency by 20%

• Large 10-gallon (37L) steel drum contains heavy dust loads

• Highly portable design with stable caster wheel base

• 122cm crush-resistant hose features 6.35cm hose cuffs

• Anti-static components significantly reduce the likelihood of static shocks

The Longopac bagging system is designed to work with virtually any dust collector to safely contain and dispose of dust and debris. These Mega Strong 20 meter long continuous liners will make approximately 20 bags each that be easily tie clipped for quick changing and disposal.

• Allows for dust-free disposal

• Works with virtually any dust collector

• Use with Husqvarna S-Line dust extractors

• Each liner makes approx. 20 bags

WWW.KEVMOR.COM.AU

• Sold per 4-pack of Mega-Strong 20 meters bags (64my)

• 4 Pack Replacement bags for the S13 & S26 vacuums

Suits:

• DE 110A

• DE 110S

• DE120

• S 36

Specifications:

• Dimensions: (L x W x H)

• Weight: 5.1kg

550mm x 160mm x 164mm

Dust Deputy 2.5 Deluxe 10 Gal. Cyclone Separator Kit

Lonogopac Mega Strong Heavy Duty Dust Bags - 4 x 20m Tubes

$595.75 + GST

$180.00 + GST

Husqvarna

REDILOCK DIAMONDS

TFDMB624S_30SB_3

TFDMB627S_100SB_3 TFDMB627D_100SB_3

TFDMB645S_50MB_3

TFDMB645D_50MB_3

TFDMB673S_20HB_3 TFDMB673D_20HB_3

R S

180mm Angle Grinder

• Metabo Marathon motor with patented dust protection for long service life

• Electronic safety shutdown

• Rotating back handle

• Tool-free adjustable guard; twist-proof

• Electronic overload protection & restart protection

• Metabo VibraTech (MVT): integrated damping system and side handle to reduce vibrations in order to protect the user’s health

• Metabo safety switch prevents unintentional start

• Auto-stop carbon brushes to protect the motor

• LED signal indicates triggered restart protection or overheating

Specifications

Rated input power 2400 W

No-load speed 8450 rpm

Torque 14 Nm / 124 in-lbs

Spindle Thread M 14

Weight 5.7 kg

Cable Length 4 m / 13 ft

125mm Angle Grinder

• For effective spot grinding and removal of concrete, screed and coatings with diamond cup wheels

• Antistatic extraction hood can be removed without tools for use as angle grinder with guard

• High torque and overload capacity for demanding applications in continuous use

• Low weight, ideal for sanding walls and ceilings

• Working close to edges thanks to integrated folding segment

• Vario Tacho Constamatic (VTC) Full-wave Electronics with Thumbwheel

• Electronic soft start for smooth start-up

• Restart protection

• Metabo S-automatic safety clutch

WWW.KEVMOR.COM.AU

• Low-vibration side handle Metabo VibraTech (MVT)

Specifications

Rated input power 1700 W

No-load speed 2800 - 9600 rpm

Spindle Thread M 14

Weight 2.7 kg

Cable Length 4 m / 13 ft

METABO WE 24-180 MVT

METABO RSEV 17-125 Renovation

• Highest service life for extreme applications: robust, powerful angle grinder with speed control and greatest power density in its class for quick work progress

• Longer service life, more power: the Metabo Marathon-motor with patented dust protection, up to 20% more overload capacity and 50% more torque

• Vario Tacho Constamatic (VTC) Full-wave Electronics with Thumbwheel: for working at customised speeds to suit the application material and speeds that remain almost constant, even under load

• Tool free, fast disc change at the touch of a button with the Metabo M-Quick-System

• Tool-free adjustable guard; twist-proof

• Low-vibration side handle Metabo VibraTech (MVT)

• Metabo S-automatic mechanical safety clutch: minimises kick-back to the lowest level when the disc jams unexpectedly - for maximum user safety and swift progress

• Electronic overload protection, soft start and restart protection

• Auto-stop carbon brushes to protect the motor

• Quick, tool-free installation of the extraction shroud on a compatible angle grinder

• Integrated sliding segment for quick, tool-free access even when wearing gloves, for working close to walls.

• Extraction hood with flexible brush rim and optimised extraction channel for particularly low-dust grinding indoors and outdoors

• Anti-static plastic prevents electric charges and dust accumulations ensuring constantly high suction power. Connection for dust extraction Ø 35/41 mm

• Mains-powered angle grinder: Suitable for all Metabo angle grinders Ø125mm

• Adjustable

WWW.KEVMOR.COM.AU

N G L E G R I N D E R S

METABO WEV 15-125 125mm Angle Grinder

METABO GED 125 Angle Grinder Dust Extraction Shroud

CUP WHEELS

Multiplate 125mm

Blue Cup Wheel - 5 Segment

5″ (125mm) trade quality 5mm high diamond grinding cup wheels for very aggressive to fine concrete grinding

TFDCW125_5_MP

Husqvarna Medium Bond

G1043 - 6 Segment - 125mm

TFDCW125_1043MB6

G1043 - 9 Segment - 180mm

TFDCW180_1043MB9

Cup Wheel Star B 5” 30 Grit Soft Bond

TFDCW5_30SSTARB

L-Cup Wheel 7” Purple

7 Segment 30 Grit Soft Bond

TFDCW7_L30S

L-Cup Wheel 5” Purple

7 Segment 30 Grit Soft Bond

TFDCW5_L30S

Husqvarna Cup Wheel Soft Bond

G1013 - 6 Segment - 125mm

TFDCW125_1013SB6

G1017 - 8 Segment - 125mm

TFDCW125_1017SB8

G1017 - 12 Segment - 180mm

TFDCW180_1017SB12

Husqvarna Medium Bond

G1045 - 8 Segment - 125mm

TFDCW125_1045MB8

G1045 - 12 Segment - 180mm

TFDCW180_1045MB12

Hilti Cup Wheel Fine Grit - 150mm

TFDCW150_TURBF

Medium Grit - 150mm

TFDCW150_TURBM

Coarse Grit - 150mm

TFDCW150_TURBC

Husqvarna Tacti-Grind G65 105mm

TFGCW105_G65

125mm

TFGCW125_G65

180mm

TFGCW180_G65

WWW.KEVMOR.COM.AU

Husqvarna Tacti-Grind G50 105mm

TFGCW105_G50

125mm

TFGCW125_G50

180mm

TFGCW180_G50

The Matador Undercut Saw is designed for cutting doors, door frames, baseboards and skirtings. It is ideal for installers of most floor coverings such as carpets, ceramic, parquet, LVT, LVP etc... Fitted with a powerful motor, it provides a clean and precise cut easily and quickly. The cutting height and depth are fully adjustable through its millimetric gauges. The Matador Undercut Saw includes a dust collection nozzle and a pipe for connection to an external dust collector

Double Insultion

Input Power 1300 W

Cutting Depth 0-47 mm

Min. Cutting Height 8 mm

Max. Cutting Height 35 mm

No-load Speed 5000/min

Weight 5.6 kg

Powered by an 8000 RPM, 1050 watt motor, the Roberts 10-56AS Longneck Jamb Saw easily cuts door jambs, baseboard, cabinet toe kicks, inside corners and most hanging doors.

• Extended ‘tail’ for maximum leverage against torque

• Powerful, 1050 watt industrial grade power unit

• Patented design enables the saw to cut full inside corners in moulding up to 1/2” thick

• An adjustable cutting depth guide prevents cutting into plaster or wallboard when trimming base boards

• Easy access trigger for better control

• Precision height adjustment from ‘flush’ to 1-1/16th

• Doors as thick as 1-3/4” can be undercut without removal

• Includes 6-3/16” 36-tooth carbide tip blade and masonry blade

• Custom moulded carrying case

N D E R C U T D O O R S A W

Matador Undercut Saw Door Trimmer

Roberts 10-56 Undercut Saw Door Trimmer

$998.45 + GST

$453.60 + GST

Scan the QR Code to find out more about the Matador Undercut Saw

Scan the QR Code to find out more about the Roberts 10-56 Undercut Saw

PORTABLE SCREED MIXING STATION

$1,595.00 + GST

NEW & IMPROVED TurboMix Mixing Station (Mark III)

No need to set up enclosed tents or work in isolation, as the turbo mix is designed with a Vacuum Port, mounted directly on the guard to remove those nasty dust clouds.

Our unique pouring spout allows easy distribution of the levelling compound, combined with the dual locking foot release tilt mechanism, which locates at 35 degrees and 0 degrees for ease of use. Keeping the unit cleaner overall.

• Dual-Action Mixing Paddle

• 1900W Dual-Gear Variable Speed Controller

• Locking Foot Release

• Tough Bucket to suit mixing applications up to 100kg

Gear Ratios

• No. 1: Mixing Screeds - 150 - 300 rpm

WWW.KEVMOR.COM.AU

• No. 2: Liquids, Paints, Emulsions - 300 - 650 rpm

Scan the QR Code view our full range of mixing paddles

UFS9000 TurboMix Portable Screed Mixing Station Kit

COLLOMIX AQiX Water Dosing Device

$525.00 + GST

Work quickly, easily and conveniently with AQiX water dosing device. The AQiX does not require a separate power connection and runs on 2 double AA batteries, which are already supplied. With average use, the battery life is over a year. Only a hose is required.

• Measure water up to 50% faster

• Simply set the water amount, attach it to the bucket and press start. The device takes care of everything by itself

• Easy dispensing of the required water amount for any type of construction material

• Ensures exactly the right amount of water for every mixture

• No longer any need to haul measuring buckets

• Ultraprecise

• The device is battery-operated – no cable to get in the way, extremely mobile

• 2 memory buttons

• Manual measuring

• Intuitive operation

• IP Protection Class 64

• Break-proof housing for day-to-day use at the construction site

• Can be used on all common mixers

• In a sturdy hardshell case

• MADE IN GERMANY

When using the AQiX for the first time, the air must first be let out of the system via the manual dosing function until the water flows out cleanly DO NOT LET WATER FREEZE INSIDE DEVICE AS THIS CAN DAMAGE THE INTERNALS

Scan the QR Code find out more about the Collomix AQiX Water Dosing Device

SOROTO 80L Forced Action

Screed Mixer

Applications

• Removable mixer arms - makes cleaning easy - no need for tools

• By tipping the mixer it can easily be loaded onto a car by means of the small wheels

• Easily adjustable telescopic legs for discharge into bucket or wheelbarrow

• The grid lid is mounted on hinges and equipped with automatic mechanical switch to meet safety regulations

• In case of wear you can only need to change one paddle if the others are all right

Motor 240 V / 110V

Output 1.1 kW

Weight 86 kg

RPM 30

Mixing Capacity 80 L

Height 109 - 127 cm

Width/Length 60/75cm

Standard Blades Steel

SOROTO 100L Forced Action

Screed Mixer

Applications

• Removable mixer arms - makes cleaning easy - no need for tools

• By tipping the mixer it can easily be loaded onto a car by means of the small wheels

• Easily adjustable telescopic legs for discharge into bucket or wheelbarrow

• The grid lid is mounted on hinges and equipped with automatic mechanical switch to meet safety regulations

• In case of wear you can only need to change one paddle if the others are all right

Motor 240 V / 110V

WWW.KEVMOR.COM.AU

Output 1.1 kW

Weight 96 kg RPM 30

Mixing Capacity 100 L Height 109 - 127 cm

Width/Length 68/80cm

Standard Blades Steel

Applications

• Removable mixer arms - makes cleaning easy - no need for tools

• By tipping the mixer it can easily be loaded onto a car by means of the small wheels

• Easily adjustable telescopic legs for discharge into bucket or wheelbarrow

• The grid lid is mounted on hinges and equipped with automatic mechanical switch to meet safety regulations

• In case of wear you can only need to change one paddle if the others are all right

Motor 240 V / 110V

Output 1.1 kW

Weight 104 kg

RPM 30

Mixing Capacity 120 L

Height 117 - 127 cm

Width/Length 72/95cm

Standard Blades Steel

The advantages of a SoRoTo® Dust Controller

• The access to and view of the material is not compromized - not like other products for dust limitation

• No need for a mask

• Easy to mount on both old and new SoRoTo® Forced Action Mixers

• Available in several sizes: 80 L, 100 L, 120 L

• Compatible with most industrial vacuum cleaners

• And of course it seriously limits potentially dangerous dust emittance

R C E D M I X E R S

SOROTO 120L Forced Action Screed Mixer

SOROTO Dust Controller

$139.00 + GST

Work well for concrete finishing, the spreading of levelling powders, and sealers on decorative concrete installations

• No Straps

• Superior Stability

• Lightweight

• Slips On Over Existing Shoes

• Spikes Will Not Come Loose

• Designed in the USA

Sizes available:

Medium (fits USA size 9 & under)

Large (fits USA size 9 - 11)

Extra Large (fits USA size 11 - 16)

$70.85 + GST

Originally designed to eliminate heel, and thread patterns from destroying stamped concrete.

• No Straps

• Superior Stability

• Lightweight

• Slips On Over Existing Shoes

• Kick on (Hands Free)

• Flexible when you need to kneel or bend over

• Designed in the USA

Sizes available:

Medium (fits USA size 9 & under)

Large (fits USA size 9 - 11)

Extra Large (fits USA size 11 - 16)

WWW.KEVMOR.COM.AU

$59.00 + GST

$55.00 + GST

SHOE-IN Pro Finish Epoxy Spiked Shoes

SHOE-IN Flat Sole Epoxy Spiked Shoes

SHOE-IN Replacement Sharp Spikes (32 pieces)

SHOE-IN Replacement Blunt Spikes (32 pieces)

• Replaceable spikes

• Ideal for walking on wet screeds, levelling compounds & epoxies

• Will not leave marks

• Extremely stable

• Easy to fasten straps

$30.75

Ideal for walking on wet screeds or levelling compounds

• 40mm spikes

WWW.KEVMOR.COM.AU

Spiked Shoes

GST

• Flexible plastic perfect for traversing wet screeds, leveling compounds, and epoxies

• 24.6mm steel spikes on the bottom of the shoes

• Leaves no traces behind

• Exceptionally steady

S P I K E D S H O E S

UFS5904 25mm Spiked Shoes

ROMUS 94255 40mm Spiked Shoes

$29.95 + GST $47.45 + GST

KRAFT HC177 Flexible Gunite

+

SPIKED ROLLERS

WWW.KEVMOR.COM.AU

UFS7550 11mm x 500mm wide Spiked Roller $145.00 + GST $58.50 + GST

11mm x 750mm wide Spiked Roller

UFS7525 11mm x 250mm Spiked Roller

UFS7553 30mm x 500mm wide Spiked Roller $39.95 + GST $89.95 + GST

• Used when applying self-levelling, epoxies, coatings and cement screeds

• Aids the self-levelling process releases air bubbles and improves bonding to the substrate

• Splash Guard

• Comes with threaded handle adaptor

• 11mm spike are for all types of high build and self-levelling floor coatings

• 30 mm spikes are for spiking floor overlays in excess of 4mm thick

SPIKED ROLLERS

WWW.KEVMOR.COM.AU

Metal Spiked Roller 250mm

$214.95 + GST

$116.80 + GST

• Used when applying self-levelling, epoxies, coatings and cement screeds

• Aids the self-levelling process releases air bubbles and improves bonding to the substrate

• Splash Guard

• Comes with threaded handle adaptor

• 11mm spike are for all types of high build and self-levelling floor coatings

• 30 mm spikes are for spiking floor overlays in excess of 4mm thick

ROMUS 94241 Spiked Roller

x 250mm

ROMUS 94242 Spiked Roller

Metal Spiked Roller 500mm

pack)

$29.95 + GST

Key Features:

• 3M Industrial Adhesive strip secures level pegs on dust-free substrates during installation

• Level pegs return to original upright position when stepped on or rolled over

• Bright Yellow color ensures easy visibility

• Metric millimeter scale for precise measurements

• Marked up to 100mm

• Plastic material is easy to cut

• Specifically designed for professional contractors

• Sold in packets of 100

$155.00 + GST

Measuring Wedge - Aluminium

$39.95 + GST

Screed Level Measuring Wedge for measuring deviation from horizontal

• Measuring units range from 1mm to 20mm

• The wedge is slid under a 2m ruler for measurement purposes

• Tapered measuring wedge made of solid aluminium

• The wedge is used to measure the flatness of a non-sloping substrate

$39.95 + GST

• Professional tool for applying adhesive and levelling compounds.

• Base profile 600mm with 6 replaceable hardened spikes.

• Applying height is adjustable from 0 to 11mm due to a stainless shim.

• Does not include the handle.

UFS7540 Self Levelling Pins (100

Level Flatness Screed Levelling

Pin Leveller 0-11mm Self Levelling Gauge Rake

Set of 12 spikes to suit the Pin Leveller Gauge Rake - 11mm

$66.75 + GST

$82.75 + GST

Using self-levelling and other materials, the 24” Gauge Rake enables a consistent coating of surface.

• Aluminium construction

• Plated steel T-skates can be raised and lowered to the required depth of materials for consistent coatings (up to 2”)

• Sturdy aluminium bracket broom handle thread

• Easy to assemble

• Made in the USA

$78.95 + GST

$95.00 + GST

Allows for a uniform coating of self-levelling, high performance flooring, underlayment’s, decorative concrete, and other materials.

• Aluminium construction, sturdy yet lighweight

• Rotate the gauges for a longer life

• Use with broom thread handle

• Made in the USA

• The gauge sizes included are 1.6mm, 3.2mm, 6.35mm, 9.5mm & 12.7mm

$18.04 + GST

$27.50 + GST (5 pairs)

KRAFT 24” Gauge Rake / Leveler Head CC975-01 (without handle)

KRAFT 36” Gauge Rake / Leveler Head CC976-01 (without handle)

KRAFT PRO 24” Gauge Rake / Leveler Head CC994-01 (without handle)

KRAFT PRO 36” Gauge Rake / Leveler Head CC995-01 (without handle)

KRAFT Replacement Gauge Rake Sleds

KRAFT PRO replacement gauge set

$415.00 + GST

Used to self-level thicker levelling compound, screeds and other materials, enables a consistent coating of surface.

• Width 600mm and Depth 40mm

• Aluminium construction

• Replacement gauges available

• Sturdy and long lasting

• Easy to assemble

WWW.KEVMOR.COM.AU

$28.10 + GST

Used to self-level thicker levelling compound, screeds and other materials, enables a consistent coating of surface.

• Width 600mm and Depth 40mm

$282.80 + GST

To be used with the Level Flatness Screed Levelling Measuring Wedge to gauge the unevenness of the subfloor

For checking unevenness of 3-5 mm (1/8-13/16”)

100 cm (4”) long with handle shaft and adjustable wheels

$24.40 + GST

Used to self-level thicker levelling compound, screeds and other materials, enables a consistent coating of surface.

• Width 600mm and Depth 40mm

Gauge Rake Complete with Telescopic Handle - Pin Leveller

Screed Flatness Gauge 100cm

Replacement Gauge Rake Pins - 60cm (set of 2)

KRAFT Gauge Rake Replacement Handle Bracket Casting

$69.95 + GST

$78.75 + GST

A lightweight, triangular Genuine Extru-Lite™ Magnesium Blade allows the user to float, screed, and level concrete with one versatile placer. Adjusting the height of the handle allows the user to engage the surface of tool for smoothing, or moving to engage the point of the triangle for checking flatness on slabs

• Genuine Extru-Lite™ Magnesium head

• 30% lighter than aluminum

• Adjust the handle to use flat surface or point of head

• Two metal braces secure the handle for stability

KRAFT 18” Double Notch Steel Rake Head

$70.50 + GST

• For spreading new floor coatings

• Hardened steel blade is notched on 2 sides for longer life

• 1/4 In. (5mm) V-Notch

• Made in the USA

KRAFT 24” Double Notch Steel Rake Head

$70.50 + GST

• For spreading new floor coatings

• Hardened steel blade is notched on 2 sides for longer life

• 1/4 In. (5mm) V-Notch

• Made in the USA

KRAFT 24” Magnesium Tri Level Placer CC932

KRAFT 24” Magnesium Tri Level Placer CC934

$48.05 + GST

The large flat end of the blade is angled with an optimal curve and a to easily push and pull material into place as the user spreads and levels concrete.

The flat toothed rake on the other side moves through rocks, aggregate, and other materials.

$39.50 + GST

• Lightweight 19-1/2 In. x 4 In. aluminum head

• 60° angle provides the best working angle

• Head curved to maximize movement

• Heavy-duty aluminum braces provide reinforced strength to head

• Blade is welded to handle for support

495 x 102mm (without hook)

$54.55 + GST

• Powder-coated for easier cleanup

• Ideal for moving wet concrete, aggregate and blue metal

• Lightweight trade extrusion rake for concrete with no hook

• 45-degree edge angle for easier material movement

KRAFT 24” x 4” Magnesium Concrete Rake with Handle

KRAFT 19-1/2 x 4” Right Angle Placer

OX Aluminium Concrete Rake

$75.00 + GST

$85.00 + GST

Rugged heavy-duty floor squeegee with all steel frame providing support for the 24” or 36” gum rubber blade. Ideal for moving materials and clean-up. The replaceable blade ensures maximum water collection to leave smooth floors dry and is reversible for longer wear. Not recommended for use with oily materials.

• Ideal for cleaning floors and moving materials

• Pure gum rubber blade for maximum water collection

• Blade is reversible and replaceable for extended use

• Steel brace holds squeegee securely

GG235-01

$66.65

• Strong aluminum construction

• Designed for rigidity and stability when moving material

• Used to ensure consistent depth when spreading thin materials

• Use with EPDM Squeegees, sold separately

• Use with broom threaded handles, sold separately

• Bright blue color is easy to spot on jobsite

• Pure gum rubber blade

• Gum rubber ensures maximum water collection

• Reversible blade for longer wear

• Not recommended for oily surfaces

• Fits 24” Floor Squeegees

• Made in the USA

S Q U E E G E E E Q U I P M E N T

KRAFT 24” Heavy Duty Floor Squeegee GG285

KRAFT 36” Heavy Duty Floor Squeegee GG286

+ GST

KRAFT Aluminium Squeegee Frame

$24.50 + GST

KRAFT 24” Gum Rubber Refill for Aluminium Floor Squeegee - GG287

Squeegee Blade - GG235-04

$22.50 + GST

• EPDM a strong synthetic rubber

• Heat, ozone, and weather resistant

• Works well with most alkalis and diluted acids.

• Apply and spread thin flooring material

• Good for cleaning up liquids

• Straight blade for thin materials

• Made in the USA

Squeegee Blade - GG235-03

$22.50 + GST

• EPDM a strong synthetic rubber

• Heat, ozone, and weather resistant

• Works well with most alkalis and diluted acids

• Apply and spread thin flooring material

• 1/4 in. V-notch for consistent depth

• Made in the USA

Squeegee Blade - GG235-02

$32.95 + GST

• EPDM a strong synthetic rubber

• Heat, ozone, and weather resistant

• Works well with most alkalis and diluted acids

• Apply and spread thin flooring material

• 1/8 in. V-notch for consistent depth

• Made in the USA

Squeegee Blade - GG235-05

$24.50 + GST

• EPDM a strong synthetic rubber

• Heat, ozone, and weather resistant

• Works well with most alkalis and diluted acids

• Apply and spread thin flooring material

• 1/4 in. U-notch for consistent depth

WWW.KEVMOR.COM.AU

• Made in the USA

$29.95 + GST

• Pure gum rubber blade

• Gum rubber ensures maximum water collection

• Reversible blade for longer wear

• Not recommended for oily surfaces

• Fits 36” Floor Squeegees

• Made in the USA

KRAFT 24” Straight Replacement

KRAFT 24” 1/8” V-notch Replacement

KRAFT 24” 1/4” V-notch Replacement

KRAFT 24” 1/4” U-notch Replacement

KRAFT 36” Gum Rubber Refill for Aluminium Floor Squeegee - GG288

The TRIAC ST is primarily used as a profiling tool for welding and processing plastic membranes. Additionally, it is used for professional welding, shrinking and molding various thermoplastics.

• Professional heat gun weighing less than 1 kg

• Robust heat gun – Made in Switzerland

• Ergonomic, two-component handle, optimised for long periods of use

• Actively cooled, protective tubes ensures continuous safety by protecting against burns

• Developed for tough construction site use

• Carbon brake protects overloading

• More than 80 attachment nozzles available

$845.00 + GST

The TRIAC AT is an intelligent heat gun suited for job sites that require plastic to be welded and/or molded. With the intelligent e-Drive control unit, regulation of temperature settings between 40 and 620 °C and the air volume can be achieved independently.

• Digital display shows the current setting values

• Cool-down function

• Restart protection enables safety at work

• Configurable Eco-Mode

• Voltage level indicator

• Developed for construction site use

• Carbon brake protects overloading

• More than 80 attachment nozzles available

WWW.KEVMOR.COM.AU

$789.00 + GST

• Full ceramic heating element

• Temperature and airflow continuously adjustable

• Protected electronic circuit board (encapsulated)

• Ultra-lightweight and compact power tool

• Weighs only 580 grams

• Enables users to work for longer periods of time without fatigue

• Offers optimal services with infinitely adjustable temperature and air volume for plastic welding

$625.00 + GST L E I S T E R H E A T G U N S

LEISTER Triac ST Heat Gun

LEISTER Triac AT Heat Gun

LEISTER Hot Jet S Heat Gun (mini welder)

LEISTER Floor Welding Start Up Kit

$795.00 + GST

The TRIAC ST is primarily used as a profiling tool for welding and processing plastic membranes. Additionally, it is used for professional welding, shrinking and molding various thermoplastics.

KIT INCLUDES:

• Leister Triac ST Heat Gun - 230V 1600W Hot Air Welder

• Standard Reducer (Pencil) Nozzle

• Speed Welding Nozzle 5mm Round

• Speed Welding Nozzle 5mm Round (small air-slide)

• Quarter Moon Knife (Trimming Knife)

• Supplied in Hard Plastic Leister Case

LEISTER Tarpaulin Welding Kit (for roofing/sheet membranes)

$790.00 + GST

The TRIAC ST is perfect for roofing, sheet membranes and weld thermoplastic membranes (for example made of TPO, PVC, EVA, PIB and modified bitumen).

KIT INCLUDES:

• Leister Triac ST Heat Gun - 230V 1600W Hot Air Welder

• 40mm wide welding nozzle

• 38mm silicon pressure roller

LEISTER Unifloor 500 Automatic Welder

$6,465.00 + GST

WWW.KEVMOR.COM.AU

Suitable for welding the joints in resilient floor coverings made of plastic such as PVC, CV, PUR, antistatic ESD floors, as well as for sealing the joints in natural coverings made of linoleum and rubber.

The hot-air blower also rotates out automatically when obstacles are touched, e.g. if the hot-air blower comes into contact with a wall, which almost completely eliminates damage to the flooring.

• Reliable due to automatic nozzle positioning

• Transportation bar for a user-friendly handling

• Fast clamping of all common weldrod rolls

• Quiet and low-maintenance brushless motors

Scan the QR Code to find out more about the Leister Unifloor 500 Automatic Welder

$2,160.00 + GST

The MINIFLOOR drive unit transforms the TRIAC welders into a practical, automatic floor welder.

• Quick-clamp lock allows the TRIAC to be assembled and disassembled within seconds.

• Lightweight, net weight 5.3 kgs

• Easy to transport

• Twice as fast as manual welding

• True to the groove thanks to the dual axis

• 2 meters per minutes

$3,350.00 + GST

Leister’s electric, joint cutter, GROOVER, cuts weld joints in elastic floor coverings made of plastics such as PVC (vinyl), PE, CV, PUR and natural materials such as linoleum and rubber.

When milling elastic floor coverings, Leister’s GROOVER collects the milling dust in a specific dust bag via the 360 degree rotatable ejection pipe.

• Groove cutting on all resilient floor coverings

• Very high, two-stage grooving speeds

• Adjustable guide roller for tracking accuracy

• Integrated fan and dust bags

• Cuts can be made close to the edge

$3,250.00 + GST

WWW.KEVMOR.COM.AU

This cordless groover uses a general-purpose milling cutter to mill grooves for weld seams and grouts when laying resilient floorcoverings (PVC, PE, PUR) and natural materials (rubber, linoleum).

• Cordless, battery operation with maximum flexibility

• General-purpose milling blade for plastic and natural floor coverings

• LED light to illuminate the grooving area

• Sensing roller for reliable grooving, even on uneven floors

• Side stop for grooving along rails

• Three-point stand, enabling increased stability

• Optimized rear guide roller for precise positioning

E I S T E R H E A T G U N S

LEISTER Minifloor Drive Unit

LEISTER Electric Vinyl Floor Groover Machine

LEISTER 500-LP Cordless Groover

$94.90 + GST

• High quality

• Durability

• Suitable for both left and right-handed operators

• Newly developed bow shape for higher pressure

$67.50 + GST

• Silicon pressure roller used when hot air welding

• Making it easier to seal welds

• Perfect for roof and sheet membrane welding

$54.50 + GST

• Designed for rolling vinyl joints and for pressing down on the vinyl to remove air bubbles

• Single-arm design that lets one work close to the wall

Seam Roller

$62.95 + GST

• For rolling vinyl at seams

• Offset arm bracket allowing work close to walls

• Ultra-smooth, zinc-plated

• Ball bearing construction produces a smooth roll

STUBBI Commercial Sheet Vinyl Rollers (3 piece)

$145.00 + GST

Includes:

• 1 x 28mm Brass Stubbi Roller

• 1 x 43mm Zinc Plated Stubbi Roller

• 1 x Stubbi Edge Roller

300mm wide

$335.00 + GST

• Pressure roller for design/ lino/ rubber flooring

• Hi-tech roller mechanics, giving perfectly distributed pressure application

• Ergonomic handling

Scan QR Code to see more Wall, Floor & Vinyl rollers

UFS 7-852 50mm Silicon Roller

UFS7590 Resilient Vinyl Hand Roller Square Edge

Crain 349L Round Edge

JANSER Triple-Flex Pressure Roller

$42.50 + GST

• Can be used for countertops, walls, and resilient flooringe

• Allows for flush work into corners

• Hard rubber rollers

• No axle projections

• Cast Aluminium frame

$82.80 + GST

• Can be used for countertops, walls, and resilient flooringe

• Allows for flush work into corners

• Hard rubber rollers

• No axle projections

• Cast Aluminium frame

$83.05 + GST

• New twist lock adjustable handle telescopes

• The raised handle allows firm control with less effort

• Tri-sectional rollers

• Nickel plated parts won’t rust

WWW.KEVMOR.COM.AU

$99.50 + GST

Lightweight rubber roller to smooth all types of floors and coatings. Can be used when installing waterproofing membranes.

• Telescopic extendable handle, extends to 164cm

• Roller width 42.5cm

• Allows for body pressure to be applied up to 60kg

• 7 roller segments

• Rubber non-marking wheels

• Suitable for most types of floor coverings

$499.00 + GST

Vinyl Sheet Roller for installation commercial sheet vinyl, vinyl planks, rubber and many other types of flooring.

• Detachable transport wheel assembly kit for easy transport, upright support and protection of segmented rollers

• Segmented rollers exert even pressure on uneven surfaces

• Available in: 35lb, 75lb, 100lb and 150lb

Wall and Floor Roller

Beno 333-AR Airway Extension Handle Roller

Crain 333 Extension Wall and Hand Roller

UFS7400 Lightweight Stand Up Vinyl Roller - Telescopic

UFS 75lb Commercial Vinyl Linoleum Roller

GAS TOUCHES AND ACCESSORIES

SEIVERT PROMATIC

50mm Soft Flame Burner

$209.99 + GST

Specifications:

• Burner diameter Ø, 50mm

• Effect: 26kW

• Gas Consumption: 2000g/h at 2 bar

SEIVERT PROMATIC

38mm Soft Flame Burner

$194.80 + GST

Specifications:

• Burner diameter Ø, 38mm

• Effect: 11.5kW

• Gas Consumption: 900g/h at 2 bar

SEIVERT PROMATIC

28mm Soft Flame Burner

$194.45 + GST

Specifications:

• Burner diameter Ø, 28mm

• Effect: 5.9kW

• Gas Consumption: 460g/h at 2 bar

Sweeping, powerful yellow and blue soot-free windproof flames, ideal for cable work, other heat shrinking applications and roofing membranes.

• Fresh air sucks in and keeps the burner head cold to minimize the risk of burning the shrink material

• To heat the sleeves efficiently but still soft enough not to overheat the shrink material

SEIVERT PROMATIC - Handle for Gas Torches

$221.75 + GST

WWW.KEVMOR.COM.AU

• Plastic composite handle reinforced with 30% glass fibres for maximum durability

• Double moulded soft grip for highest comfort and usability

• Piezo igniton with instant trigger on/ off function

• Bayonet fitting for burners

• Swivelling hose connection to avoid hose drag

Available in Medium and Large. Come in packs of 50 masks.

• ASTM Level 2 for medical grade protection - 99.9% Bacterial Filtration Efficiency / 98% Particulate Filtration Efficiency

• Fluid-resistant - reduces potential exposure to bodily fluids and blood

• Absorbent inner layer

• Comfortable fit

• Gentle on skin- hypoallergenic matterial

• Made in Singapore

The world’s FIRST P2 disposable mask with exhalation valve designed to use the AIR+ Active Ventilator (sold separately).

Medium (pack of 10) - $25.50+gst Large (pack of 10) - $23.70+gst

• Certified P2 Protection (INSPEC Certified AS/NZS 1716)

• Meets Australian Standards & Designed For Professional Usage

• Ultimate comfort

• Head strap adjusts for perfect fittings

• Folds easily for travel

• Ultimate Ergonomic Design for max comfort and fitting

• Uses a “Smart Valve” that works with active ventilation

• Fits the Air+ Dispossable N95 P2 Masks

• Expels trapped CO2 from the mask, preventing headaches and dizziness

• Rechargable and reusable

• Expels moisture

• Protects against PM2.5 particles, haze and viruses

Scan the QR Code to see more Dust Masks and Respirators

Air+ Disposable Surgical Mask (Medium & Large)

Air+ Disposable N95 P2 Mask with exhaust valve

$14.95 + GST (pack of 50)

Air+ Active Ventilator APV

$39.00 + GST

R F A C E D I S I N F E C T A N T

Vital Oxide is an EPA Registered, Hospital Grade disinfectant listed on “List N” to kill Coronavirus Disease 2019 (COVID-19). We meet the EPA’s emerging pathogen requirements for viruses showing efficacy against envelope and non-envelope virus, both large and small.

Vital Oxide is:

• An EPA Hospital Grade Disinfectant

• NSF Rated Food Safe

• CRI SOA for Carpet Use

Full Strength – For hospital disinfectant, heavy duty odor eliminator and mold and mildew killer

5:1 – For carpet and fabric sanitization, Vital Oxide is compatible with most synthetic carpeting and commercial cleaning machines.

12:1 – For 99.999% sanitization on food contact surfaces with no rinse required. 30 second kill time on Escherichia Coli and Staphylococcus aureus. Great for daily use.

Food Contact Sanitizer - No Rinse Required - NSF Registered (D2) Sanitizer: 99.999% Sanitization on food contact surfaces.

Vital Oxide is odorless and won’t alter the taste of food on sanitized surfaces. Vital Oxide eliminates 99.999% of bacteria, including e Coli, Salmonella and Listeria in less than 60 seconds.

Molds & Mildew Killer:

Eliminates and prevent spores with up to 7 months residual effects. Safe on a wide range of surfaces, marble to carpeting and beyond.

Allergen Eliminator:

Proven effective on pet dander as well as dust mite and cockroach allergens. Can be used directly on pet bedding & sleeping areas.

Odour Eliminator:

End malodors caused by smoke, trash, septic systems, stale cooking & more. Vital Oxide contains no masking agents or fragrances and is highly effective at neutralizing urine and fecal odors.

Great For:

Hospitals and health care facilities, Medical and science research labs, Restaurants, cafeterias, food service facilities, Cruise ships, hotels, hospitality services, Schools, universities, educational facilities Jails, prisons, correctional institutions, Government and public service offices

UFS 9500 Econo Snap Knife

FLOORING KNEE PADS

FENTO 200 Pro

Knee Pads

$149.00 + GST

Designed by flooring installers

• Flexible and 100% water resistant

• Prevents knee and back complaints through pressure distribution

• Wide, flat base for maximum stability while you work

• Lightweight and durable

PROKNEE

Knee Pads - Shipping mid July

$499.00 + GST

• Sizes: 20 - 24 regular straps

• Breathable wick technology

• Shin support system takes weights off the joint

• Pocket shap surrounds the knee joint

• Replaceable cellular urethane cushions

• Patented and made in USA

WWW.KEVMOR.COM.AU

JANSER Medical (Alpro)

Knee Pads

$115.00 + GST

• German made and designed

• Made from polyurethane

• Easy to clean and lightweight

• Total knee and kneecap protection

• Waterproof

• Ergonomic velcro fastenings

Kneel-it

Chair (V3)

$475.00 + GST

• Easy to fold and transport

• 100% Tool Free

• 360° turning capability

• Durable and sturdy construction

• Strapless

• Built-in cushioned knee pads

• Sliding seat adjust forward and reverse

0714 Standard

Rolling Kneeling

Comfort Knee Pads

$83.95 + GST

• Machine washable

• Made from flexible neoprene

• Long-lasting build

• Built-in protection comfort straps

• Dual purpose - knee kicking and kneeling

Neoprene Gel Knee Pads

$61.50 + GST

• Professional grade

• Single front fastening strap

• Premium grade neoprene

• Non-marring

• Washable & Durable

• Made in USA

• Available in Fluro, Camo & Blue

Knee Pads

$89.95 + GST

• Lightweight design

• Full 360° turn radius ability

• Glide from wall to wall

• High load bearing caster

• Minimises back stress

• Goes from blade to knee pads in the push of button

Tradegear Safety Hinge

Knee Pads

$65.50 + GST

• Super tough polymer shell

• Full natural rotation

• Dual density foam

• Air vent system

• Extra wide 40mm nylon elastic straps

• Fits almost any size knee

Knee Pads

$74.85 + GST

• Heavy-duty construction

• Durable straps and buckles

• Ultra-thick padding

• Tough leather wear surface minimises build-up of sharp objects

• Only weighs 800 grams

AKA. Kneeboard Sliders

$183.15 + GST

$116.95 + GST

WWW.KEVMOR.COM.AU

• Engineered to prevent knee and back problems

• Evenly distributes pressure across knees

• Notches increases ventilation

• Front and back materials

vulcanised together for strength

• Heavy-duty, yet lightweight polystyrene plastic, resistant corrosion

• Rounded edges prevents gouging of concrete

• Comfortable, removable/replaceable knee pads

• One size fits all

O R I N G K N E E P A D S

Crain 197 Deluxe

KneeBlades Rolling

TROXELL “Super Soft”

Crain 206 Leather

FENTO 100% Comfort Kneeling Board

KRAFT CC153 Concrete Knee Slides

•

•

Scan the QR Code to see more Blades available at Kevmor

UFS 9190 Heavy Duty Bulk Utility

UFS 9170 Trimmer Blades

9160 Slotted

9154 4” Scraper

OLFA LB-50 18mm Snap

Turbo

UFS 9158 8” Scraper Blades (Sold

ORION 950 Smart Pinless Wood Meter

Dual Depth - (Bluetooth enabled)

$699.00 + GST

Designed for professional wood flooring installers/ inspectors and quality control managers

• Bluetooth App Enabled

• Temperature and Humidity Sensor

• Relative Moisture Measurement Mode

• Equilibrium Moisture Content

• On-site Calibration

• Data Collection

• Fast Selection Species Settings

• Non-Damaging Pinless Sensor

ORION 910 Smart Pinless Wood Meter

Deep Depth

$585.50 + GST

The Orion 910 is the successor to the popular MMC220, offering the same deep depth measurement and accuracy

• Deep Depth Measurements

• IntelliSense Technology

• Fast sSelection Species Settings

• Non-Damaging Pinless Sensor

• Virtually Unaffected by Temperature

• On-Site cCalibration

• Relative Moisture Measurement Mode

ORION 930 Smart Pinless Wood Meter

Dual Depth

$615.50 + GST

Accurate determination of the moisture content deeper in the wood while minimizing the effect that surface moisture

• Dual-Depth Measurements

• IntelliSense Technology

• Fast Selection Species Settings

• Non-Damaging Pinless Sensor

• Virtually Unaffected by Temperature

• On-Site Calibration

• Relative Moisture Measurement Mode

WAGNER Floor Sentry Wood Floor

WWW.KEVMOR.COM.AU

Data Logger

$215.00 + GST

The card-sized Floor Sentry® embedded wood floor data recorder measures and logs the temperature and relative humidity (RH) inside your wood floor as well as the surface temperature and RH of the concrete subfloor or underlayment. Floor Sentry pairs with the free Wagner Sentry® smart device app via Bluetooth® to instantly monitor the state of the floor or underlayment, set alert threshold levels, and more.

W O O D M O I S T U R E M E T E R S

CONCRETE MOISTURE METERS

WAGNER Rapid RH L6

Concrete Relative Humidity Starter Kit (includes smart loggers)

$899.55 + GST

Kit comes with everything you need to conduct a concrete Relative Humidity test

• 5 x L6 Smart Sensors celsius version for Australia

• 1 x Total Reader® with Touch-n-Sense™ Technology Celsius Version for Australia

• 2 x Smart Logger™ ambient temp. & humidity recorders

• 1 x. Insertion Tool

• 10 x. Extensions

• 5 x Protective Caps with Rubber Plugs and Butyl Gasket

• 5 x Stainless Steel Covers

• 1 x ¾” SDS Masonry Drill Bit

• 1 x Wire Cleaning Brush

• 1 x Vacuum Attachment

• Certificate of Calibration

• Floor Map

• Carrying Case & Instruction Manual

WAGNER Rapid RH L6

Concrete Relative Humidity Starter Kit (without smart loggers)

$777.55 + GST

Kit comes with everything you need to conduct a concrete Relative Humidity test

• 5 x L6 Smart Sensors Celsius version for Australia

• 1 x Total Reader® with Touch-n-Sense™ Technology Celsius Version for Australia

• 1 x. Insertion Tool

• 10 x. Extensions

• 5 x Protective Caps with Rubber Plugs and Butyl Gasket

• 5 x Stainless Steel Covers

• 1 x ¾” SDS Masonry Drill Bit

• 1 x Wire Cleaning Brush

• 1 x Vacuum Attachment

• Certificate of Calibration

• Floor Map

WWW.KEVMOR.COM.AU

• Carrying Case & Instruction Manual

WAGNER C555 Concrete Moisture Meter Kit

$549.00 + GST

C555 Concrete Moisture Meter Kit will guarantee you to measure your concrete quickly and with no damage

• ASTM F2659 compliant

• Measures to 0.5-inch (12mm) depth

• Integrated ambient temperature and RH sensors

• Moisture scale reads from 0% to 6.9%

• Audio threshold alarm

• In Relative mode can be used on other concrete-similar materials such as concrete block

CONCRETE MOISTURE METERS

WAGNER Rapid RH L6

WFP400+ Professional Installers Kit

$1,699.00 + GST

The WFP400+ Rapid RH® L6 Professional Flooring Installer Kit provides everything you need for fast, accurate moisture testing of concrete, wood, and other wood building materials

• Wagner Rapid RH L6 Complete Kit

• Smart Loggers

• Orion 950 Dual Depth Pinless Moisture Meter with on demand calibration

• Infrared (IR) Thermometer

• Rugged Hard-shell ABS Carrying Case with Foam-padded Interior

WAGNER Rapid RH L6

WFP405+ Professional Concrete Installers Kit

$1,650.00 + GST

The WFP405+ Rapid RH® L6 Professional Flooring Installer Kit provides everything you need for fast, accurate moisture testing of concrete other building materials

• Wagner Rapid RH L6 Complete Kit

• Smart Loggers

• C555 Handheld Concrete Moisture Meter

• Infrared (IR) Thermometer

• Rugged Hard-shell ABS Carrying Case with Foam-padded Interior

WWW.KEVMOR.COM.AU

WAGNER DataGrabbers with Bluetooth (5 pack)

$675.00 + GST

The rapid L6 DataGrabber is an automated data logging device which streamlines the utility of the DataMaster L6 app by taking scheduled readings of your job site as you need it.

Used in conjunction with the one-use calibrated Wagner (Green) L6 sensors and DataMaster L6 App.

WAGNER DataGrabbers without Bluetooth (5 pack)

$450.00 + GST

The rapid L6 DataGrabber is an automated data logging device which streamlines the utility of the DataMaster L6 app by taking scheduled readings of your job site as you need it.

Used in conjunction with the one-use calibrated Wagner (Green) L6 sensors and DataMaster L6 App.

W A G N E R C O N S U M A B L E S

WAGNER Rapid RH L6 Sensors (Green) - 25 pack

$1059.25 + GST

Replacement Wagner Sensors for the Wagner L6 complete starter kit. Simplest F2170 test on the market. Fully calibrated sensors with NIST-traceable calibration. Celsius version for Australia

• Capture, assemble, and email all data necessary to adhere to the ASTM

F2170 standard

• 25 x L6 Smart Sensors

• 50 x Extensions Sleeves

• 25 x Protective Caps with Rubber Plugs and Butyl Gasket

• 25 x Stainless Steel Covers

WAGNER Rapid RH L6 Sensors (Green) - 5 pack

$299.00 + GST

Replacement Wagner Sensors for the Wagner L6 complete starter kit. Simplest F2170 test on the market. Fully calibrated sensors with NIST-traceable calibration. Celsius version for Australia

• Capture, assemble, and email all data necessary to adhere to the ASTM

F2170 standard

• 5 x L6 Smart Sensors

• 10 x Extensions Sleeves

• 5 x Protective Caps with Rubber Plugs and Butyl Gasket

• 5 x Stainless Steel Covers

WAGNER Rapid RH Replacement Drill Bit for use with Wagner Concrete Moisture Testing Equipment

$85.00 + GST

Concrete and masonry professionals use the Wagner Meters SDS Masonry Drill Bit in SDS rotary hammer drills.

• New solid carbide head has high wear-resistance and makes more precise holes for anchor setting

• Suits the Wagner Rapid RH L6 sensors

• Quadruple helix and optimum head geometry for consistently fast drilling speed over

• Indicator mark

HILTI One-step Vacuum + Drill Bit for use with Wagner Concrete Moisture Testing Equipment

$290.30 + GST

Use the TE-CD Hammer Drill Bit to get a 100% clean concrete hole prior to placing the Rapid RH® Smart Sensors at the correct depth for moisture testing. For Clean Dust-Free Hole to Place the Rapid RH® Smart SensorsDrills and Cleans Concrete Hole in One Easy Step

• Diameter: 3/4”

• Working Length: 9-7/16” (240mm)

• Compatible with 1 1/4” vacuum hose

• Robustness, lifetime, and drilling speed equal to TE-CX drill bits

WAGNER Rapid Electronic pH Kit

880-R0007-001

$299.50 + GST

The RapidRH® Portable pH Meter with its integrated smart data chip is easy to operate and compact to carry. Its sleek design encases a variety of features to help you accurately find the pH level of any solution.

• Easy to use dual-slope three-point automatic calibration with manual temperature compensation

• Dual sets of buffer solution pH data

• Low voltage display

• Selectable Celsius (°C) or Fahrenheit (°F) display

• Portable case with room for calibration buffer solutions

WAGNER Rapid Electronic pH Kit

( 3 x 50ml Bottles)

$34.95 + GST

Replacement Buffer Solutions for the Wagner Electronic pH Meter

• 1 x 50ml 4.0 pH Buffer Solution

• 1 x 50ml 7.0 pH Buffer Solution

• 1 x 50ml 10.01 pH Buffer Solution

Rapid RH pH Test Kit - 25 strips

$59.95 + GST

Quickly and conveniently assess concrete pH ranging from 6.5 to 13.0. Once the result is obtained just discard the test strip

Includes a 2 oz. bottle of distilled water

WWW.KEVMOR.COM.AU

The Wagner Meter pH Test Kit with 25 pH test strips is just the right package for concrete slab pH assessors. It is a crucial addition to the Rapid RH moisture measurement system because pH matters just as much as moisture in assessing slab readiness

Machery-Nagel pH Test Strips - 100 pack 92125

$32.00 + GST

pH-Fix strips with chemically bound indicators are the bench mark for pH testing with test strips. The fixation prevents bleeding and therefore contamination of the sample

• pH - 7.0-14

• Self life - 4 years

• Storage temperature - 4-30°C

• 100 test strips per pack

W A G N E R P H M E T E R S

NOVORYT Melting Kit Set - 120 pieces (100 melting putty + 10 touch-up pens)

$995.00 + GST

Corrections or repair of faults and damage in wood, laminate, parquet, PVC, mineral plates and much more.

KIT INCLUDES:

• 100 pieces. NOVORYT Melting Putty

• 10 pieces. NOVORYT Touch-Up Pens

• 3 Tins of Lacquer Fixation: silk-matt, matt, silk-shine

• 1 Chisel

• 1 Draw Blade

• 1 Gas Melter incl. gas for Refill

• 1 Replacement Tip for gas melter

• 1 Cleaning Cloth

• 2 Sanding Sponge

NOVORYT Professional Wood Repair

Kit - 475 400 100

$850.00 + GST

Perfect for repairing damages and faults in wood, furniture, parquet and much more

KIT INCLUDES:

• 1 Melting Stick Gun

• 1 Standard Nozzle

• 1 Pointed Nozzle

• 1 Aluminium Cooling Block Rectangular

• 1 Aluminium Cooling Block Round

• 1 Non-stick Oil for the Cooling Block

• 1 Trenching Spade

• 1 Injection Moulder for Novoryt Quattro stick

• 12 pieces. Assorted FORTE sticks

• 1 Carry case

NOVORYT Ultra 60 Set Melting Kit

$399.00 + GST

WWW.KEVMOR.COM.AU

The Novoryt Set 60 Melting Kit will be perfect for heavily used surfaces (parquet, cork flooring, furniture, kitchen surfaces, laminates) etc.

KIT INCLUDES:

• 60 pieces Novoryt melting putty

• 1 Hot Knife

• 1 Plastic Spatula

• 1 Stripping blade

• 1 Cleaning Cloth

• 2 Sanding Fleece

NOVORYT 40 Set Melting Kit

$420.00 + GST

Novoryt Flooring Repair Kit for Hardwood and Resilient Flooring and Walls. Also perfect for design, laminate, linoleum and real wood floors

KIT INCLUDES:

• 40 pieces. NOVORYT Melting Putty

• 5 pieces. NOVORYT Touch-Up Pens

• 1 gas melter incl. gas for refill

• 1 Plastic Spatula

• 1 Stripping Blade

• 1 Cleaning Cloth

• 2 Sanding sponge

NOVORYT Forte Wood Repair Kit

- 475 401 000

$150.00 + GST

Ideal for quick minor repairs

KIT INCLUDES:

• 1 Melting Stick Gun

• 1 Cooling Block

• 1 Trimming Tool

• 8 pieces. Assorted FORTE sticks

- 1 x Larch Douglas Fir

- 1 x Natural Oak

- 1 x Oak Rustic

- 1 x Moor Oak

- 1 x Wenge

- 1 x Spruce Knot Optic

- 2 x Black

WWW.KEVMOR.COM.AU

O V O R Y T R E P A I R K I T S

Accumulator Version

$125.00 + GST

For use with Novoryts Repair Kits

NOVORYT Touch-Up Pens - 10 colours

$112.00 + GST

The NOVORYT Touch Up Pens are available in varnished wood or covering colours. Offering a valve system - the one that never dries out - brush system - for delicate or thick corrections - and last but not least fibre system

• Colours: 71, 41, 30, 29, 19, 18, 14, 13, 11 & 08

• Including 10 replacement tips

NOVORYT Repair Sticks (singles)

$15.50 + GST

Replacement colour stick for the Novoryt repair kits

• 117 Beach Mid

• 124 Olive Ash

• 126 Mid Grey

• 134 Ebony

• 135 Black

• 136 Nacre

• 138 Anthracite

$32.00 + GST

Available in:

• Matt

• Matt Silk

• Dull Matt

• Glossy Silk

• 139 Grey RAL

• 142 Special White

• 144 Olive Oak

• 156 Oak Green

• 149 Light Grey

• 157 Iroko

• 166 Ash Sand

$109.50 + GST

For use with Novoryts Repair Kits

WWW.KEVMOR.COM.AU

Kits

$175.00 + GST

For cutting off excess melting material

Sold per 150ml spray cans

NOVORYT Electric Melter Hot Knife

NOVORYT Lacquer Fixation Sprays

NOVORYT Gas Hot Melt Knife

NOVORYT Trench Spade for Wood Repair

ROLLED GOODS MANIPULATOR

Rolled Goods Manipulator (RGM) - Remote Cable Release

Forklift Accessory - SO-900 CAB

$4,575.00 + GST

Rolled Goods Manipulator (RGM) - Non Cable Release

Forklift Accessory - SO-900 NC

$2,595.00 + GST

What is a RGM ?

A RGM or Rolled Goods Manipulator is a forklift attachment for lifting heavy rolled materials like sheet vinyl and carpet. This NEW invention is used to replace your traditional carpet poles! The RGM can lift flooring products from a horizontal to a vertical position & vice-versa. Can work with any heavy rolled goods! With a 340kg weight capacity this device eliminates the risk of injury to an employee who would otherwise lift the material up by hand. It’s also much more efficient than standard carpet or vinyl poles

The patented rolled goods manipulator is a forklift accessory capable of safely moving and lifting heavy rolled materials from a horizontal to vertical position and back again.

Perfectly designed for commercial sheet vinyl, rubber, carpet and all manner of rolled materials

• Forklift attachment for easily moving heavy rolled materials such as sheet vinyl or carpet

WWW.KEVMOR.COM.AU

• Allows flooring rolls to be picked up, moved, and placed in an upright position for storage with ease

• Utilizes an elongated rod to firmly secure rolled materials while transporting

• Maintains & improves warehouse safety ensuring rolled items can be moved independently

• Limits injury risk while improving employee productivity

• Stores easily, 8’6” long and under 55kg

• Can lift up to 400kg

Ideal Applications:

Marine carpets, artificial turf, sheet vinyl, carpet, turf rolls, sports flooring, paper rolls, pretty much any rolled goods.

WWW.KEVMOR.COM.AU

WWW.KEVMOR.COM.AU

WWW.KEVMOR.COM.AU

WWW.KEVMOR.COM.AU