ATV Product Catalog ENG 2026

ATV EQUIPMENT

GRASSLANDS ATV

WHY SHOULD YOU CHOOSE THIS PASTURE TOPPER? • Fitted with a flap at the back, which releases the grass to avoid excessive accumulation under the hood. In this way you save on fuel and reduce wear on the belts.

You can also operate at a higher speed than an ATV flail mower without a flap. The grass is also spread more evenly.

BEST SELLER

Konstruerad och utvecklad för nordiska förhållanden

ATV FLAIL MOWER 1,2 M, 15 HP

ATV FLAIL MOWER 1,5 M, 15 HP

35-VKMATV120H

• Delivered with mounted 15 hp motor • Off button for quick shutdown in emergency situations • Working width 120 cm • Sturdy rubber balloon wheels (16-6.50x8) • The wheels are individually height adjustable with spring-locked crank to prevent the crank moving backwards as a result of vibration The ATV flail mower is equipped with an off button that quickly shuts down the engine in case of an emergency. This important safety feature allows for immediate engine shutdown from a protected position in the event of an unforeseen incident.

The towbar is pre-drilled at predetermined locations for the attachment of a support leg. The support leg is not included but is available as an accessory.

35-VKMATV150H2

• Double attachment - you can decide for yourself whether you want to have the tow bar on the left or right side of the mower • The wheels are mounted behind or at the side of the machine, either behind for maximum access close to obstacles or at the side for stability and enable it to follow ground contours • Electrical start-up with battery The VKMATV150H2 flail mower is for you if you have larger areas to mow. It is equipped with an 15 hp engine which is more efficient both in normal operation and particularly on tougher ground. With a cutting width of 150 cm, you will be able to mow larger areas efficiently.

The flail mower is fitted as standard with hammer flails. There are 32 flails in total, ensuring that the grass is broken up. The flail mower is also adapted for Y-flails, which can be purchased additionally (not included).

ATV FLAIL MOWER XL 1,5 M, 25 HP

BEST SELLER

35-VKMATV150HXL

• Delivered with mounted 25 hp V-twin motor with 764CC • 32 Heavy Duty hammer flails weighing 345 g each: Robust cast flails for grass and saplings • Off button for quick shutdown in emergency situations • Support leg that makes it easier to attach the machine to the ATV’s tow ball • Dual mounting – choose between right- or left-side towing • Strong bogie clevis with two 19x7-8 wheels on each side • Adjust the angle of operation with the turnbuckle under the tow bar • Skids at the sides for stable, smooth operation • Chain guard at the front to protect against ejected stones and clippings • Openable rear flap • Electric start-up • Working width 150 cm

GRASSLANDS ATV

AN ATV – MANY USES GRASS CUTTING - Pastures, ditch edges, edge cutting ROAD MAINTENANCE - Sled roads, harrowing riding course, driveway FORESTRY WORK - FORESTRY TRAILERS, TRANSPORTING BRANCHES SNOW REMOVAL - Snow removal, sanding and salting TRANSPORTATION - Trailers in various sizes and designs

ATV FLAIL MOWER WITH FLAP, 1.2 M, BRIGGS AND STRATTON 13.5 HP 35-VKMATV120H.B

• Delivered with mounted 13,5 hp Briggs and Stratton engine • Off button for quick shutdown in emergency situations • Working width 120 cm • Fit wheels for stability and compliance at the sides or for maximum accessibility at the back

ATV FLAIL MOWER WITH FLAP, 1,5 M BRIGGS AND STATTON 13,5 HP 35-VKMATV150H.B

• Delivered with mounted 13,5 hp Briggs and Stratton engine • Off button for quick shutdown in emergency situations • Flail mower with hammer flails for ATV • Working width 150 cm • Fit wheels for stability and compliance at the sides or for maximum accessibility at the back • Sturdy rubber balloon wheels (16-6.50x8)

STRIMMER ATV

35-SR620

Kellfri’s strimmer is specially designed for efficient cutting alongside obstacles such as buildings, railings, trees and under electric fences.

ATV FLAIL MOWER, FRONT MOUNTED Front mounted flail mower for larger ATVs! • Delivered with mounted 15 hp motor • Powered by centrifugal clutch • Working width 100 cm • Standard side shift • 44 Y-flails • Adjustable mounting plate

ATV FLAIL MOWER, ELECTRICALLY POWERED Launched in 2026

35-VKMATV105E

Kellfri launches VKMATV105HEE – The first electric-powered flail mower for ATVs With zero local emissions, low noise levels and up to three hours of operating time, Kellfri is taking the next step in modern green space management for farms, horse facilities, pastures and other larger areas.

NEW 2026

35-VKMATVF

TRAILERS

BEST SELLER

TIPPING TRAILER ATV 1,420 KG WITH ELECTRICAL HYDRAULIC The ideal trailer for loading gravel, earth, chippings, grass, leaves or other material. This is a transport trailer made for efficient transportation of material, regardless of whether you have a large garden tractor, ATV or small tractor.

23-TV10H

• Electrical hydraulic tipper 12 V

• All-round tyres 22 x 11 - 10

• Sturdy floor in 2 mm tread plate

• Small storage box for control box included

• Powerful three-stage tipper ram

• Oil included

Designed and developed for Nordic conditions

*Extension bracket for tipping trailer.

Extra add on

BEST SELLER

TIPPING TRAILER ATV 500 KG

23-TV06PRO

TIPPING TRAILER ATV PRO, 1.5 TONNES

The trailer is a multipurpose tipping tool. It is equipped with sturdy tires and a flat body large enough to fit an EU pallet. The entire body is made of galvanized tread plate for a longer lifespan.

The body is flat with arched inner corners, has a low loading height and removable front and rear panels for transporting longer materials such as smaller logs, twigs or fence posts.

• Volume capacity 0,3 m³ • Stable construction • Galvanized tread plate • Heavy duty tires • Body that fits EU pallet • High ground clearance • 500 kg loading capacity

ATV tipping trailer – robust and versatile for farm and forestry work • High load capacity of up to 1500 kg for heavy transport • Quick and easy tipping with manual winch – the KWE900 electric winch is available as an accessory • Fold-down and removable sides for maximum flexibility • Stable bogie with off-road tyres for operation in demanding terrain • Reinforced design adapted for leaf vacuum units and accessories

23-TV15ATVPRO

TIPPING AND FORESTRY TRAILER ATV PRO

23-TV07PRO2

An ideal ATV tipping and forestry trailer that can be used for all jobs around the farm • Removable insert floor with 2 mm galvanised plating • Powerful V-bogie for good climbing capability in forest terrain • Powerful mechanical Tower2+ slewing house lock • 4 reinforced and serrated flip-up and folding bolsters • 2 adjustable side stabilisers for use during loading included • Crane tower attachment can be adjusted • Brake hand winch included You can transport loose material with the floor fitted, and without the floor you can transport timber. Front side and tailgate are removable. Powerful V-bogie, removable sides and headboard to accommodate different lengths of timber Eyelet in front edge of floor for tipping with winch and high tipping angle When you want to convert the tipping trailer from transporting loose materials into a forestry trailer and transport timber without the floor, just remove two pins and remove the floor. 4 reinforced and serrated flip-up and folding bolsters allow you to minimise the lifting height when loading timber.

ROAD EQUIPMENT

Designed and developed for Nordic conditions

ATV YARD HARROW

Designed and developed for Nordic conditions

BEST SELLER

ROAD DRAG FOR ATV, 3-BLADE ELECTRICAL

27-GH2UG

27-V16ATV

• Two frames for placing extra weights • Adjustable height of the entire harrow • Interchangeable tow coupling or pin / fork hitch

• Height-adjustable wheels. Adjustable drawbar • Space for extra weight for increased ground pressure • Adjustment via buttons mounted on your ATV handlebar With a working width of 160 cm, the road drag is ideal for levelling your driveways and gravel roads. If you work in park and street maintenance, this grader is a great accessory for walkways and courtyards.

Side scraper: 27-GH2UG-SK Electric cylinder: 27-GH2UG-EC

BACKHOE DIGGER FOR ATV

26-GAATV2

The backhoe digger for ATVs is a versatile machine that can be used for a variety of ground jobs where space is limited, in cramped spaces, on hilly terrain or through narrow passages. The operator can control the excavator with ultra precision thanks to its small size and smooth movements. This allows you to excavate in a precise location without damaging surrounding areas or plants.

ATV BACKHOE DIGGER 360

26-GAATV360

An excavator with 360-degree rotational capability offers several advantages that enhance its usability and efficiency. Increased maneuverability makes it particularly useful in tight workspaces and places with limited mobility. This flexibility is invaluable when access to hard-to-reach places is required, eliminating the need to move the entire machine.

The ability to rotate in all directions significantly increases productivity by enabling precise bucket placement without moving the entire excavator.

This saves time and energy, resulting in more efficient work.

RIDING COURSE ATV

BEST SELLER

Engineered by Kellfri in Sweden

ARENA HARROW ATV

WATER TRAILER ATV

Kellfri’s top-selling Arena Harrow RBH for ATVs has several updates to enhance comfort, efficiency and ease-of-use. The simple-to-use design of the arena harrow restores and maintains high-quality riding surfaces quickly and easily.

28-RBH2

With the adjustable parts, you can operate the arena harrow on sand, quartz, chippings, fibre sand and felt mixes. You can use raking tines, a perimeter scraper or tubular roller, or if you prefer, crank up the rear section for larger material flows. The harrow can be used both indoors and outdoors on wet and dry surfaces. Sturdy rubber tyres 16 x 6.50-8 can handle most surfaces.

Kellfri water trailer with 800-litre capacity, supplied with spreader ramp for watering paddocks etc., but also for delivering water to pastures or watering in the garden, etc.

Stable powder-coated frame with stabilisers at the rear and on the tow bar for parking the trailer with a full tank.

The tank is made of strong plastic with an all-round protective cage. The tank is easy to lift off and the floor is large enough for an EU pallet which, together with two load collars, makes this a handy cart for transporting other goods.

Supplied with 50 mm ball coupling and 200 cm-wide spreader ramp.

ATV RAKE 27-K14

28-VBS+

Flexible solution when you need to move horse jumps to harrow the substrate or as mobile storage of jumps.

There is a 50 mm ball coupling at the back of the trailer to connect more trailers if and when the need arises.

The pole rack can also be removed to give the trailer a load area of 250 x 100 cm. The floor is made of mesh pattern so that material does not get caught on the floor.

ROLLER, TOWED

• Working width 150 cm • Total width 165 cm • Max. filled weight of 200 kg Suitable for soil surfaces, paddocks, roads and for top-dressing of grass surfaces.

All-metal with 135-litre water volume, giving a total weight of 200 kg. Without water in the cylinder it is light and easy to handle for storage.

Rake for ATV´s or smaller tractors. The rake is suitable for gravel pathways, paddocks et cetera.

ATV ROAD DRAG

HORSE JUMP TRAILER PLUS

The trailer has substantial rubber balloon wheels and the tow bar has a handle and hitch for a 50 mm ball coupling allowing it to be pulled both by towing vehicles or by hand.

23-VV800

27-V1500

27-V18ATV

• Working width 180 cm • Steel length 193 cm • Load box for half pallets Grader with rotatable edge steel for ATV or small tractor, angled steel and individually adjustable wheels for grading road angles. Wheels adjustable 15 cm individually, making it easy to retract gravel verges into the road, scrape and level roads, courtyards and paddocks, etc.

HARROW MAT

36-HM

The harrow mat’s areas of use:Reversible harrow mat for levelling softer substrates and animal droppings.

• Working width 154 cm / 202 cm / 250 cm • Level out earth mounds made by voles and moles • Harrow the paddock • Rake the courtyard • Aerate the grass in the fields in the spring • Spread out dung on pastureland • Dethatch moss • Aerate tired lawns

ROAD / SNOW / ICE ATV SALT AND FERTILISER SPREADER 40 KG 33-JM40

• Fitted at front or rear • 12 v electric motor drives the spreading disc • Weather protection • Mounting frame

90 L ATV SPRAYER 27-WSATV

GRITTER 1.35 M, TOWED

• L x W x H 65 x 45 x 55 cm • Pump 12V, 4.8 l/min • Boom with 2 nozzles Can be used for watering and spraying.

32-S500

SALT & FERTILIZER SPREADER ATV

TOWED SPRAYER 120 L

33-JMATV

27-WST120

The spreader is friction-driven via the wheels, with accurate adjustment for precise spreading amount.

Accurate adjustment of spreading amount, and with the option of adjusting the four spreader fins to suit the material.

• L x W x H 60 x 130 x 90 cm • Pump 12V, 3.8 l/min • Boom with 2 nozzles Can be used for watering and spraying.

• Working width 1,350 mm • Hopper capacity 500 l • Speed 30 km/h • 50 mm ball coupling • 14” wheels which drive the spreading auger A gritter for sand and salt, with a simple and stable design and quick adjustment of spreading quantity.

The hopper holds 500 litres, and sturdy wheels drive the spreading auger. The spreading auger is easily disengaged for transport and re-engaged with a simple manual operation.

SNOW EQUIPMENT FOLDING PLOW ATV 37-VPATV

SNOW BLOWER ATV

Launched in 2026

37-SFATV130

Launched in 2026

NEW 2026

NEW 2026

BEST SELLER

GRITTER ATV 1.0 M

GRITTER ATV 1.0 M, WITH AGITATOR

SNOW BLADE ATV

32-S230

32-S232

37-SBATV3

• Hopper capacity 230 l • Sturdy wheels • 50 mm ball coupling

Stable and functional spreader for sand, gravel or salt for ATVs, UTVs, garden tractors or cars.

A gritter with simple and stable design for sand and salt and with quick adjustment of spreading quantity.

The hopper holds 230 litres, substantial wheels drive the spreading auger which is easily disengaged for transport and re-engaged with a simple manual operation.

With 50 mm ball coupling for towing using an ATV or tractor.

A well-constructed tool offering top functionality and long service life, a good addition to your ATV machine fleet.

• Mechanical agitation • 4.00-8 tyre size gives a high diameter for good traction • Studs can be mounted on tyres • Holds 210 litres • Tow ball and fork hitch included The ATV gritter is a favourite among people needing to sand and salt their paths, roads, courtyards or other surfaces in both hot and cold weather conditions.

Mechanical agitator in the hopper The mechanical agitator in the gritter’s hopper loosens clumps of salt, sand and other frozen or packed dry material.

Launched in 2026

NEW 2026

BEST SELLER

3-TONNE FORESTRY TRAILER ATV

2-TONNE FORESTRY TRAILER ATV

21-SV30

With Kellfri’s SV30 forestry trailer, you get a reliable and well-thought-out forestry trailer designed, tested, and assembled in Scandinavia. With a strong engine from Briggs & Stratton, a solid crane with a 4.2-meter reach, and market-leading load capacity of 3000 kg, this equipment is the obvious choice for those seeking efficiency, durability, and quality in forestry work.

Advantages of SV30 Compared to Competitors • Delivered assembled and test-driven in Scandinavia.

• 4.2 m crane with long reach.

• Electric start directly from the handlebar.

Developed and quality assured in Sweden

• 3000 kg load capacity – best in class.

• 10 hp quality engine from Briggs & Stratton.

• Radio-controlled winch as standard.

• Articulated steering with dual hydraulic cylinders.

• Drive and articulated steering are controlled electronically from the handlebar

21-SV20

The foundation of Kellfri’s forestry trailer is a strong steel chassis designed to withstand heavy-duty use in forest and off-road conditions. The stable frame provides excellent torsional rigidity and ensures that the load remains secure even on uneven ground or slopes. The chassis is also well balanced to reduce strain on the ATV, and the low ground pressure makes it possible to travel even on soft surfaces. Everything is designed for durability and smooth towing, making the trailer both easy to manoeuvre and built for long service life.

• Crane 4.2 m • 9 hp petrol engine with electric start • 2-lever valve block • Wheel drive • Frame steering • Valve block for wheel drive and frame steering positioned in front of the operator for easy handling • Radio-controlled winch • Grapple KG09

Developed and quality assured in Sweden

• Large wheels – high ground clearance and excellent climbing ability.

GRAPPLE BUCKET

21-KGS42

GRAPPLE 09

21-KG09

KELLFRI DEALERS - KELLFRI.CO.UK

ROTATOR 3

21-KR03