/// Dubai Hills Villa 123 Interior Design Aug 2022
22/11/2022
1
1
//Villa 123
//Exterior Renders
2
//Villa 123
//Exterior Renders
3
//Villa 123
//Exterior Renders
4
//Villa 123
//Exterior Renders
5
//Villa 123
//Exterior Renders
6
//Villa 123
//Exterior Renders
7
//Villa 123
//Exterior Renders
8
//Villa 123
//Exterior Renders
3
//Villa 123
//Basement Floor
5
//Villa 123
//Basement Floor
7
//Villa 123
//Ground Floor Plan
8
//Villa 123
//Ground Floor Plan
10
//Villa 123
//Ground Floor
12
//Villa 123
//Ground Floor
13
//Villa 123
//Ground Floor
15
//Villa 123
//Ground Floor
17
//Villa 123
//Ground Floor
19
//Villa 123
//First Floor
20
//Villa 123
//First Floor
22
//Villa 123
//First Floor
24
//Villa 123
//First Floor
26
//Villa 123
//First Floor
28
//Villa 123
//First Floor
30
//Villa 123
//First Floor
32
//Villa 123
//First Floor
33
//Villa 123
//First Floor
35
//Villa 123
//First Floor
36
//Villa 123
//First Floor
38
//Villa 123
//First Floor
40
//Villa 123
//First Floor
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS. KEYPLAN:
Description
Rev
Purpose of issue
Date
Checked
Authorized
Rev
Date
Authorized
Client:
Project Title:
Main Contractor:
Subconsultant/ Subcontractor:
Drawing title:
SCHEDULE OF DRAWINGS Designed by:
DINA HADDADIN
Original Scale
Drawn
Checked
MARAH ALABDALLAT
DINA HADDADIN
Date: AUGUST-2022
Date:
Project Number
123
SEP-2022
Authorised
Plot Size --
Date:
-
Sheet #
A01-001
A1 Rev
R-01
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS.
ABBREVIATIONS (A) A AC, A/C ACCU ADJ AG AHU ALUM
- AREA, ARCHITECTURE - AIR CONDITION - AIR COOLED CONDENSING UNIT - ADJACENT - AIR GAB - AIR HANDLING UNIT - ALUMINUM
(B) BLDG. - BUILDING BLK - BLOCK BM - BENCHMARK BO - BOTTOM OF BOT, BOTT - BOTTOM BRD. - BOARD
(C)
MATERIAL SYMBOLS (H)
(R)
H,HT.,HGT. - HEIGHT HARDNR - HARDENER HB - HOSE BIB HD - HAND DRYER HDW. - HARDWARE HOR. - HORIZONTAL HR. - HOUR HVAC - HEATING VENTILATION AIR CONDITION HW - HARDWOOD HP - HIGHEST POINT
R RAC RC RD REF.
(I) ID IE. INCL'D INFO. INT.
(J)
CAB. CAP. CATV
- CABINET - CAPITAL - CABLE ANTENNA TELEVISION CEIL, CEIL'G- CEILING CEM. - CEMENT CF - CEILING FAN CH - CLOTHES HOOK CHB - CONCRETE HALLOW BLOCK CL - CENTER LINE CLO. - CLEAR CMU - CONCRETE MASONRY UNIT CO. - CLEAN OUT COL - COLOR, COLUMN CONC. - CONCRETE CONT. - CONTINUOUS CORR. - CORRIDOR, CORRUGATED CWR - COLD WATER RISER
JAN. JT.
- JANITOR - JOINT
(K) KG. KIT. KS
- KILOGRAM - KITCHEN - KITCHEN SINK
(L) LAB. LAM. LAND'G LEV. LOAD'G LP LSD
- LABORATORY - LAMINATED - LANDING - LEVEL - LOADING - LOWEST POINT - LIQUID SOAP DISPENSER
(D) D DECO DET. DF DIA. DIM. DL DN. DRS DS DWG.
- DRYER - DECORATIVE - DETAIL - DRINKING FOUNTAIN - DIAMETER - DIMENSION - DOOR LOCK - DOWN - DOORS - DOWN SPOUT - DRAWING
(E) E EA. EF EL, ELEV.
- EAST - EACH - EXHAUST FAN - ELEVATION, ELEVATOR ELEC, ELECT - ELECTRIC, ELECTRICAL EQ. - EQUAL, EQUATES EQUIPT. - EQUIPMENT ERB - ELECTRIC RISING BARRIER EWC - EASTERN WATER CLOSET EWH - ELECTRIC WATER HEATER EXAM. - EXAMINATION EXH. - EXHAUST EX. JT. - EXPANSION JOINT EXP. - EXPANDED EXT. - EXTERIOR, EXTERNAL
(M) M. MACH. MAINT. MAT. MAX. MECH. MET.
- METER - MACHINE - MAINTENANCE - MATERIAL - MAXIMUM - MECHANICAL - METAL
MFG. MFTR. MH MIN. MISC. MM. MO MTD. MTG.
- MANUFACTURING - MANUFACTURER - MANHOLE - MINIMUM - MISCELLANEOUS - MILLIMETER - MASONRY OPENING - MOUNTED - MOUNTING
N/A NIC NO. NTS.
- NOT APPLICABLE - NOT IN CONTRACT - NUMBER - NOT TO SCALE
OC OD OPNG ORIG.
(G) GALV. GB GD GEN. G.I. GRC
- SOUTH
SCHED. SD SECT. SH SHT. SIM. SLP.
- SCHEDULE - SOAP DISH - SECTION - SOAP HOLDER - SHEET - SIMILAR - SLOPE
SPECS. - SPECIFICATIONS SQ. - SQUARE SS - SERVICE SINK ST. STL., SST.- STAINLESS STEEL STD. - STANDARD STL. - STEEL STNLS - STAINLESS STO., STORE- STORAGE STP - SEWAGE TREATMENT PLANT STRUCT, - STRUCTURAL STRUCT'L SUSP., SUSP'D - SUSPENDED SYMM. - SYMMETRICAL SYS. - SYSTEM
- GALVANIZED - GRAB BAR - GUTTER DRAIN - GENERAL, GENERATOR - GALVANIZED IRON - GLASS REINFORCED CONCRETE GRD.,GRND.- GROUND GRG - GLASS REINFORCED GYPSUM GWB - GYPSUM WALL BOARD GYP. - GYPSUM
UON US
PERFORATED MESH - UNLESS OTHERWISE NOTED - UNDERSIDE
X1
1
- ON CENTERS - OUTSIDE DIAMETER - OPENING - ORIGINAL
T TB TF THK. TO TOI., TOIL TOSS TYP.
5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
HIDDEN LINE
A
WIRE MESH MATCH LINE
KEYPLAN:
XA YA
(V) VAR. VER. VERT. VTR
MARBLE (SECTION) - VARIES - VERIFY - VERTICAL - VENT THRU ROOF
ORTHO GRID
GRID AT (14) ANGLE
GRID AT (26) ANGLE
GRID LINES, COLUMN LINES WOOD FINISH (PLAN)
(W)
WOOD BLOCKING DRAWING TITLE
W WAIT'G WC WD WDO. WH WP
- WEST, WITH, WIDTH - WAITING - WATER CLOSET - WOOD - WINDOW - WEEP HOLE - WORKING POINT
OTHERS: & < CL Ø @ # %
- AND - ANGLE - CENTER LINE - DIAMETER - EACH, AT - NUMBER - PERCENT - SQUARE
FLOOR PLAN
1 THERMAL INSULATION (LOOSE)
A 03
SCALE
- TREAD - TOWEL BAR - TRANSFER FAN - THICK - TOP OF - TOILET - TOP OF STRUCTURAL SLAB - TYPICAL
1:100
DISCIPLINE IDENTIFICATION
FIBER GLASS
SCALE USED
A = ARCHITECTURAL S = STRUCTURAL M = MECHANICAL P = PLUMBING E = ELECTRICAL
DRAWING NO. (OR SHEET NO.)
MAIN TITLE
GRAVEL
DETAIL NUMBERING
CD000 REFLECT POOL AREA TO BE TYPICAL VERTICAL DETAILS FOR ( WALL TYPES / FLOORS )
INSULATION (RIGID)
TITLE NUMBERING
DET A100 DRAWING NO.
AREA TO BE DETAILED HORIZONTALLY
EARTH
DETAIL NUMBERING
CD200
Description
Rev
Date
Checked
Authorized
Rev
Date
Authorized
AREA TO BE DETAILED VERTICALLY
STRUCTURAL STEEL
LOCATING CONDITION DETAILED STEEL CATWALKS
DRAWINGS NUMBER
SECTION IDENTIFICATION (TO BE SHOWN ON THE OTHER SHEET OR ON THE SAME SHEET DRAWN)
PAINTED PLASTER 2 A 08
A 000
SECTION CUT HOLLOW CEMENT CONCRETE BLOCK
SECTION IDENTIFICATION (TO BE SHOWN ON THE OTHER SHEET OR ON THE SAME SHEET DRAWN)
A 111a SOLID CEMENT BLOCK
DRAWING NO. (OR SHEET NO.)
Project Title:
PABX
ARCHITECTURAL
2 A08
DISCIPLINE IDENTIFICATION
A 200 COLUMN
ELEVATION & SECTION
WALL SECTION
Client:
FOR LONGER SECTIONING
PLANS
ARCHITECTURAL
Purpose of issue
STONE
GENERAL NOTES ARCHITECTURAL
2 A 08
DRAWING NO. (OR SHEET NO.)
DISCIPLINE IDENTIFICATION
DISCIPLINE IDENTIFICATION
(P) - PRIVATE AUTOMATIC BRANCH EXCHANGE PAC - PACKAGE AIR CONDITIONER PEJ - PRE MOLDED EXPANSION JOINT PLAS, PLAST - PLASTER PR. - PAIR PROJ. - PROJECT PS - PERENNIAL SPRAY PT. - POINT PTD. - PAPER TOWEL DISPENSING PVC - POLYVINYL CHLORIDE
Y1
ACOUSTICAL TILE (LARGE SCALE)
(T)
ARCHITECTURAL
- FLOOR DRAIN - FINISH FLOOR LEVEL - FINISH GRADE LEVEL - FINISH - FLOOR - FACIAL MIRROR - FREEZER - FOOTING
(U)
ANNOTATION
(F) FD FFL. FGL. FIN. FL, FLR. FM FRZR FTG.
S
FLOOR LEVEL ZONE
(O)
4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS.
TITLE NUMBERING
A = ARCHITECTURAL S = STRUCTURAL M = MECHANICAL P = PLUMBING E = ELECTRICAL
(N)
LEGEND & SYMBOLS CENTER LINE
- RADIUS - ROOM AIR CONDITIONER - REINFORCED CONCRETE - ROOF DRAIN - REFERENCE REFRIGERATOR REINF. - REINFORCED REQ'D - REQUIRED RM. - ROOM RO - ROUGH OPENING RTG. - RATING
(S) - INSIDE DIAMETER, INTERIOR DESIGN - EXAMPLE - INCLUDED - INFORMATION - INTERIOR
3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER.
A 250
FOR SHORTER SECTIONING
SECTION CUT REINFORCED CONCRETE WALL
A 300
REVISION NUMBER
2
STAIRCASE & ELEVATOR ARCHITECTURAL
A 400
ACOUSTICAL ISOLATION PADS AS SPECS. BUILDING NAME
FURNITURE ARCHITECTURAL
A 500
Main Contractor: HEIGHT
A 600
WINDOW NO.
A 700
WATER PROOF MEMBRANE
+2.25 ROOM NO. S-Q2-65
DOOR IDENTIFICATION
FLOOR
GLASS (SMALL SCALE)
TOILETS & KITCHEN LAYOUTS
-4.55
W18 -5.15
CONSTRUCTION DETAILS ARCHITECTURAL
ROOM IDENTIFICATION
GLASS (LARGE SCALE) BUILDING NAME
ARCHITECTURAL
ROOM NO.
FLOOR
REFLECTED CEILING ARCHITECTURAL
S Q2 67
LINTEL SILL
WINDOW IDENTIFICATION Subconsultant/ Subcontractor:
LINTEL
A 800
FINISHING SCHEDULE DOORS & WINDOWS SCHEDULE
COMPRESSIBLE MATERIAL AS SPECS.
-3.10 -5.30
SILL
OPENING IDENTIFICATION
FINISH FLOOR LEVEL
GYPSUM BLOCK
+0.00 F.F.L +0.00 S.S.L
LEVEL (IN PLANS)
STRUC. SLAB LEVEL
CARPET
±0.00
LEVEL (IN ELEVATIONS & SECTIONS)
Drawing title:
ABBREVIATIONS & SYMBOLS CERAMIC TILE NC 25
NOISE CRITERIA LEVEL
Designed by:
DINA HADDADIN
Original Scale
Drawn
Checked
MARAH ALABDALLAT
DINA HADDADIN
Date: AUGUST-2022
Date:
Project Number
123
SEP-2022
Authorised
Plot Size --
Date:
-
Sheet #
A01-002
A1 Rev
R-01
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS. KEYPLAN:
Description
Rev
Purpose of issue
Date
Checked
Authorized
Rev
Date
Authorized
Client:
Project Title:
Main Contractor:
Subconsultant/ Subcontractor:
Drawing title:
MAIN AERIAL VIEW Designed by:
DINA HADDADIN
Original Scale
Drawn
Checked
MARAH ALABDALLAT
DINA HADDADIN
Date: AUGUST-2022
Date:
Project Number
123
SEP-2022
Authorised
Plot Size --
Date:
-
Sheet #
A02-001
A1 Rev
R-01
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS. KEYPLAN:
Description
Rev
Purpose of issue
Date
Checked
Authorized
Rev
Date
Authorized
Client:
Project Title:
Main Contractor:
Subconsultant/ Subcontractor:
Drawing title:
STREET & BACK VIEWS Designed by:
DINA HADDADIN
Original Scale
Drawn
Checked
MARAH ALABDALLAT
DINA HADDADIN
Date: AUGUST-2022
Date:
Project Number
123
SEP-2022
Authorised
Plot Size --
Date:
-
Sheet #
A02-002
A1 Rev
R-01
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS. KEYPLAN:
Description
Rev
Date
Checked
Authorized
Rev
Date
Authorized
WEST SIDE VIEW
Purpose of issue Client:
Project Title:
Main Contractor:
Subconsultant/ Subcontractor:
Drawing title:
SIDE VIEWS Designed by:
DINA HADDADIN
Original Scale
EAST SIDE VIEW
Drawn
Checked
MARAH ALABDALLAT
DINA HADDADIN
Date: AUGUST-2022
Date:
Project Number
123
SEP-2022
Authorised
Plot Size --
Date:
-
Sheet #
A02-003
A1 Rev
R-01
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS. KEYPLAN:
Description
Rev
Purpose of issue
Date
Checked
Authorized
Rev
Date
Authorized
Client:
Project Title:
Main Contractor:
Subconsultant/ Subcontractor:
Drawing title:
LANDSCAPE BORAD Designed by:
DINA HADDADIN
Original Scale
Drawn
Checked
MARAH ALABDALLAT
DINA HADDADIN
Date: AUGUST-2022
Date:
Project Number
123
SEP-2022
Authorised
Plot Size --
Date:
-
Sheet #
A02-004
A1 Rev
R-01
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS. KEYPLAN:
MATERIAL LEGEND: 1- FLUTED STONE SLABS 2- 80 CM HIGH PORCELAIN SLAB CLADDING 3- 300CM X 100CM PORCELAIN SLAB CLADDING - GRAY 4- 60CM X 120CM PORCELAIN MECHANICAL CLADDING - STONE LOOK 5- WOOD FINISH ALUM CLADDING 6- WOOD FINISH ALUM LOUVERS 7- BRUSHED ALUMINUM FRAMES
Description
Rev
Purpose of issue
Date
Checked
Authorized
Rev
Date
Authorized
Client:
Project Title:
Main Contractor:
Subconsultant/ Subcontractor:
Drawing title:
MATERIAL BOARD Designed by:
DINA HADDADIN
Original Scale
Drawn
Checked
MARAH ALABDALLAT
DINA HADDADIN
Date: AUGUST-2022
Date:
Project Number
123
SEP-2022
Authorised
Plot Size --
Date:
-
Sheet #
A02-005
A1 Rev
R-01
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER.
E: 493042.066 N: 2780317.388
PARKW RANCE ENTR
P
L OT
I MI T
N
SUNKEN LOUNGE
JACUZZI JACUZZI
FIRE PIT
FIRE PLACE PLACE FIRE
+0.45 +0.45
1185
1000
1000
+0.40 +0.20 C -0.20 A009-03
+0.35 +0.35
+0.40 +0.40 1000
827
+0.45 +0.45
SWIMMING POOL SWIMMING POOL -1.80 -1.35
835
SUNKEN LOUNGE -0.05 -0.20
+0.35 +0.35
382
+0.40
619
B
400
400
2
A009-0
COUNTER
453
357
1260 190
+0.40
402
-0.05 -0.20
BBQ
525
343
PLO
T
80
KEYPLAN:
158
116
87
58
39
29
32
42
65
102
120
P
2345
193
5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
L
T
ANCE
134
E: 493026.111 N: 2780300.420
L OT
AY M I EN PARKW L I T AY
1074 +8.60
OPEN TO SKY
555
ADJA
OPEN TO SKY
3793
80
n Sunke n e d r a G KEN
Description
Rev
Date
Checked
Authorized
Rev
Date
Authorized
T
ADJ
SUN EN GARD
A
A009-1
CEN
516
3794
ACE
NT
+9.20
635
A A009-1
PLOT
427
400
583
1854
124
4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS.
REFLECTIVE POOL
647
Purpose of issue Client:
+8.60
535
546
Project Title:
90 15
757
+0.40 +0.40 235
400
100 73
603
B
2
0.00 L OT
600
P
L OT
600
GATE LEVEL GATE LEVEL CAR ENTRANCE
600
3812
MI
473
T
+0.05 +0.05 0.00 0.00
Main Contractor:
0.00
L I
0.00 0.00
P
425
-0.05
+0.35 +0.35
499
T MI
E: 492994.449 N: 2780321.432
A009-0
UTILITY UTILITY ROOM ROOM
L I
916
672
+0.35 +0.35
930 +.305.35 +0
B A009-03
180
120
540
320
E: 493020.753 N: 2780348.848
400
0.00 0.00
MAIN ENTRANCE
Subconsultant/ Subcontractor:
DRR IVIV EWE D AY WAY
PAVEMENT Drawing title:
SETTING OUT Designed by:
DINA HADDADIN
Original Scale
Drawn
Checked
MARAH ALABDALLAT
DINA HADDADIN
Date: AUGUST-2022
Date:
Authorised
Plot Size --
1:100
ROAD
Project Number
123
SEP-2022
Date:
-
Sheet #
A06-001
A1 Rev
R-01
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS. KEYPLAN:
L OT P
L
MI
T
L I
P
L OT
I MI T
2345
04
05
06 07 09
10 11
13
629
B 2 A009-0
1000
1000
1000
12
626
02 03
552
01
1010
Maneuvering Parking 0
0 R7 350 735
705
B 0 44
PUMP ROOM & BALANCE TANK 26m2
295 60
600
50 5 50
302
50
108 370
-3.20
C 751
435
540
L
361
83
100
70 100
50
528
90
499
279
30
370
25
A CINEM 2 25.0 m
750
275
104
275
A7
20 485
400
230
PUMP ROOM & BALANCETANK 13 m2 30
Project Title:
30
570
275
15
15 100
100
30 210
210
WATER TANK 12 m2
222
A6
490
120
-3.15
131 230
G GAMIN M O O R N OPE 26 m2
30
30
30
115 30
675
-3.20
565 295
325
15
Client:
170
MECHANICAL 12 m2
LAUNDRY 12 m2
Authorized
40
20 50
30
184
KIT
-3.15 80 10
145
181
400
50
Purpose of issue
A5
30
275
15
15
240
345
180
540
796
180
110
115
60 120
310
105
10 15
140
110
110
30
15 30
K
145
Date
A4
190
40
190
100
570
120 140
100
J
205
SERVICE ENTRANCE
120
ELEC. 6 m2
130
445
130 145
25
80
-3.20
100
-3.15
120
15
375
115
SERVICE ENTRANCE
180
20
120
120 30 30 30 30 30 30
240 25
G
N SUNKE EN GARD
209
20 50
60 1520
15
25
120
60
H
40
295
100
110
120
Rev
A A009-1
70
213
120
473
A SHISH E G N U LO 20 m2
125
855
270
Authorized
A3
236
13
101
270
550
280 40
40 21
90
10 205
181 120
A A009-1
F
90 305
-3.15
120
124
215
70
400
ENTRANCE
305
15 80
414
E
MAID'S 19 m2
Checked
842
3794
385
142
260
50 15 80
3793
D
-3.18
-3.15
434
356
80
35
156
Date
125
SHOW GARAGE 192 m2
33
137
150
Description
Rev
12
45
550
120 145
190
323
40
580
25
A2
265
75
456
A1
400
1164
9 85 400
A
379
Main Contractor:
B
2 A009-0
572
600
714
620
Subconsultant/ Subcontractor:
08
P
L I
MI
L OT
T
MI
P
T
L I
3812 Drawing title:
BASEMENT FLOOR PLAN Designed by:
DINA HADDADIN
Original Scale
Drawn
Checked
MARAH ALABDALLAT
DINA HADDADIN
Date: AUGUST-2022
Date:
Authorised
Plot Size --
1:100 Project Number
123
SEP-2022
Date:
-
Sheet #
A07-001
A1 Rev
R-01
L OT
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
L OT
KEYPLAN:
P
L
PARKW A ENTRA Y NCE
T
MI
I MI T
P
L OT
L I
02 03 04 SUNKEN LOUNGE
05
2345
06 07 09
23.0 m2
FIRE PLACE
01
JACUZZI 11 m2
+0.45
10 11
12 SWIMMING POOL -1.35 56 m2
+0.45
FIRE PIT
13 +0.40
1201
1259
1266
-0.20
+0.20
-0.20 C
+0.35
+0.35
A009-03
OUTDOOR LIVING 57.0 m2
400
A
B 2 A009-0
COUNTER
A1
400 +0.40
B
+0.40 -3.20
BBQ
401
A2
40
-0.20
50
557 1015 283
140
REFLECTIVE POOL
+0.40
15
15
225
80
90
Authorized
Purpose of issue Client:
135
15 70
120 15
A6
146
135
110
175
55
+0.35
215
15
Project Title:
400
SUITE GUEST 2 28.0 m
400 475
Date
A5
A7 15
C A009-03
Rev
A4
-3.20
5 55 80 201
80
530
15
15
15
15 4115 56 15
170
Authorized
175
400
SUITE GUEST 2 30.0 m
MAIN ENTRANCE MAIN ENTRANCE
400
140
15
15 90
240
170
645
342
15 40
110
60
15
180
235
120
15
110
90 15
239 140
135
135
15
90 15
+0.40
295
15 70
400
150
180
180
-0.20
L
15 339
130
90
100
15 1
645
60 40
130
60 15
0 110
215
500
115
440 190
10
125
110
135
110
305 140
FOYER 14.0 m2
TOILET 8.50 m2
120
355
515
1520
660
40
300 690
215
15
110
60
225
15
120
40
120
55
255
100
165
30
105
+0.45
110 40
170
400
100 140
110
180 110
+0.40 SIDE ENTRANCE SIDE ENTRANCE
45 25 55
K
20
735
PANTRY
30
660
239 165 15
215
+0.45
554
REFLECTIVE POOL
15
255
J
20
75 15
OPEN TO SKY
445
115
15 100
340
Checked
A009-1
400
SUITE GUEST 2 26.0 m
Date
A
n Sunke n e d r Ga
399
15 59
211
235
115
255
20
420
20 16
180
440
120
15 100 15
57
40
120
37.0 m2
350
401540
15
120
240
565 560
520
H
CHEF'S KITCHEN 14.40 m2
DINING
220
1075
30
F
G
430
120
350
130 110
110
25
640
Description
Rev
180
110
60 110
170
255
80
40
175
55 15
A A009-1
120
BANQUETING AREA 6.20m2
15 60
70 15 80
4.30 m2
40
E
255 TOILET
80 15
124
407
+0.40
225
A3
3794
561
400 155
100
3793
D
60
2 55.0 m
LIVING
110
380 150
550
80
470
575
SHOW KITCHEN 30.0 m2
473
OPEN TO ABOVE
OPEN TO SKY
539
250
235 560
357
51 380
145
100
50
350
60
383 550
165
110
+0.35
130
C
121
603
ELECT. RM.
B 2
A009-0
+7.66 FFL
+0.35
MI
08
L OT
-0.05
Main Contractor:
P
T
0.00
0.00 +0.05
T
P R
0.00
3812
MI
LPG M ETE
L I
L OT
L I
+0.35
600
GARBA GE RM +7.66 FFL
665
965
+0.35
Subconsultant/ Subcontractor: 0.00
Drawing title:
GROUND FLOOR PLAN Designed by:
DINA HADDADIN
Original Scale
Drawn
Checked
MARAH ALABDALLAT
DINA HADDADIN
Date: AUGUST-2022
Date:
Authorised
Plot Size --
1:100 Project Number
123
SEP-2022
Date:
-
Sheet #
A07-002
A1 Rev
R-01
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS. KEYPLAN:
P
L
MI
T
L I
L OT
P
L OT
I MI T
01
02 03 SUNKEN 04
05
06 07 09
LOUNGE
JACUZZI
FIRE PIT
10 11
FIRE PLACE +0.45
+0.45
12
13
SWIMMING POOL -1.35
+0.40
902
1260
1198
+0.20 -0.20 C
+0.35
1014
1000
1068
-0.20
+0.35
A009-03
edge of canopy
2 A009-0
453
A1
400
Semi-Covered Balcony 11 m2 +0.40+4.80
172
COUNTER
B
357
limit of pergola BBQ
TERRACE 30 m2
195
485
320
OPEN TO SKY OPEN TO SKY
485 155
Rev
Date
Authorized
55
0 1515 8
A
A009-1
A4
A5
80
65 15
90 150
90
Project Title:
250
310
155
890
150
2
ny 5 m
d Balco
65
Covere
400 400
76
edge of canopy
A7
185
Master 2 42.0 m
585 890
-0.20
15
150
325
+0.40
160
250
80
0 15 10
15
A6
205
135
160
135
15
15
148
100
55
385
C A009-03
Authorized
90 80 125
90
235
15
290
275
open to below
400
Checked
Client:
330
REFLECTIVE POOL OPEN TO SKY BALCONY 5 m2
L
15
180 165
120
109
109 105
778
150
E T SUIT 475GUES 2 m .0 8 2
315
844
405
128
120
40
+4.85
120 180
185
126 60 15
Date
80
REFLECTIVE POOL
110
110 480 420
60
5 100 130 1
470
70
K
Master 42.0 m2
25
15
85
70
90
n Sunke n Garde
Purpose of issue
225
OPEN TO SKY
150
535
open to sky
95
Description
120
35 70
835 360
J
60
220
15
95
20 60
180
20
40 115 85 100 0 1515 17 110 6 0 15 60 0 1 10 20 15 1 5 100
660
open 385 to below
55
70
H
90
55
20 70
770
780
235 175
180
260 160
110
274 15 15
10 50 15 5010
60
235
15 50
155
135
197
75
G
15
15
145
647
140
120
315
295
F
150 290
15
15
40
240
15 140
55
175
240
90
15
20
15
E
140
A A009-1
60
140
290
UITE EST S 2 m .0 7 2
420 GU
3794
400
180
145
85
295
40 65
+4.85
460
84
305
470
Rev
A3
315
410 115
373
125
40
15
110
513
835
786
480
45
55
80
518
90
3793
open to below
85
Master 42.0 m2
open to sky
352
FAMILY ROOM 24.0 m2
30
C
D
A2
-0.20 383
400
124
401
B
400
A
edge of canopy
2
782
603
B
0.00
0.00 +0.05
P
T
MI
0.00
L I
MI
08
L OT
-0.05
P
+0.35
T
Main Contractor:
A009-0
600
UTILITY ROOM
L OT
L I
+0.35
665
850
edge of canopy
1001
+0.35
Subconsultant/ Subcontractor:
GATE LEVEL 0.00
Drawing title:
FIRST FLOOR PLAN
DRIVEWAY
Designed by:
DINA HADDADIN
Original Scale
1:100
Drawn
Checked
MARAH ALABDALLAT
DINA HADDADIN
Date: AUGUST-2022
Date:
Project Number
123
SEP-2022
Authorised
Plot Size --
Date:
-
Sheet #
A07-003
A1 Rev
R-01
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS. KEYPLAN:
L OT P
PARKW A ENTRA Y NCE
L I MI T
P
L OT
MI
T
L I
01
02 03 SUNKEN 04
5 06 0723409
05
LOUNGE
JACUZZI
FIRE PIT
10 11
12
FIRE PLACE +0.45
+0.45
SWIMMING POOL -1.35
1198
1208
1260 1067 1068
902
14
1000 1000
-0.20 C
+0.35
+0.40
10 840
-0.20
+0.20
13
+0.35
A009-03
edge of canopy
4001
B
400
A
edge of canopy
2
A009-0
COUNTER
453
B
A1
400
Semi-CoveredCANOPY Balcony 11 m2 +0.40 +4.80
limit of pergola BBQ
TERRACE 30 m2
400
FIRE PIT FAMILY ROOM 24.0 m2 +8.60
60
C
A2
-0.20
Master 42.0 m2
OPEN TO SKY OPEN TO SKY 275
open to below
open to sky
ROOF LOUNGE 42m2 +9.20
Description
Rev
Date
Checked
Authorized
Rev
Date
Authorized
A3 265
60
125
15
120
30
400
OPEN TO SKY
+8.60
647
285
180
120
+4.85
J
open to sky
837844
00m
100
40
70
A4
A5
125
110
99
Purpose of issue Client:
285
30
4050
2
BBQ 2
35
+8.60
310
A6 160
160
100
80
40 20
25
95
30
35
A A009-1
SUITE GUEST 2 m .0 8 2
245
455
K
95
120
REFLECTIVE POOL OPEN TO SKY
H
100
+8.65
120
G
120
740
SERVICE AREA
40
315
F
85 315
95
470
406
15
E
130
124
100
25 40
90
15
open to below
180
20
130
n Sunke n e Gard
33779944
130
115
40
A A009-1
SUITE GUEST 2 27.0 m
+4.85
242
60
45
145
400
50
255
140
155
20 50
+8.90
160
513 6
3793
D
Jacuzzi 6 m2
Project Title:
280
180
open to below
Master 42.0 m2
A
E ARE SEaRsVteIC r M 02.0 m2 +8.64
SIDE ENTRANCE REFLECTIVE POOL OPEN TO SKY BALCONY 5 m2
778
MAIN ENTRANCE +0.40
400 C B A009-03
-0.20
440000 400
edge of canopy
d Covere
L
A7
y 5 m2
Balcon
+9.45
+0.35
782
603
1001
0.00
0.00 +0.05
P
T
3812
MI
0.00
L I
MI
08
L OT
-0.05
Main Contractor:
P
L OT
L I
CANOPY
665 665
B 2 A009-0
600
T
+0.35
600
UTILITY ROOM
ENTRY FRAME edge of canopy +8.25
869
883540
+0.35
Subconsultant/ Subcontractor:
GATE LEVEL 0.00
Drawing title:
ROOF FLOOR PLAN DRIVEWAY
Designed by:
DINA HADDADIN
Original Scale
1:100
Drawn
Checked
MARAH ALABDALLAT
DINA HADDADIN
Date: AUGUST-2022
Date:
Project Number
123
SEP-2022
Authorised
Plot Size --
Date:
-
Sheet #
A07-004
A1 Rev
R-01
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS. KEYPLAN:
L OT P
PARKW A ENTRA Y NCE
L I MI T
P
L OT
MI
T
L I
SUNKEN LOUNGE
JACUZZI
FIRE PLACE
FIRE PIT +0.45
SWIMMING POOL
+0.45
-1.35
+0.40
-0.20
+0.20 C -0.20 A009-03
+0.35
+0.35
67
B
2
A009-0
COUNTER
68
490
88
283
-0.20
BBQ
243
+0.40 542 331
211
465 405
40
60
+8.60 438
335
+9.20
927
343
210
OPEN TO SKY
40
30 60
555
40
60 30
40
68
Description
Rev
Date
Checked
Authorized
Rev
Date
Authorized
60
124
70 455
160 60
405
179 478 102
30
n Sunke n e Gard
103
200
10
A A009-1
380
15 365
422
80
265 95
85
70
40
95
280
60 40
60
160
240
160
405
A A009-1
600
600
1180
80
70
Client:
REFLECTIVE POOL
285
740
+8.60
215
898
535
1801
575
Purpose of issue
11
390
+8.60 0 50 10
10 50 1
389
50 1030
130
Project Title:
160
255
280
545
180
295
285
425
335
+8.60
850 515
+0.40 890
B A009-03
+9.45
+0.35
+8.25
Main Contractor:
+0.35
B 2 A009-0
UTILITY ROOM +0.35
P
T
0.00
MI
0.00 +0.05
P
T
MI
0.00
L I
L OT
L I
L OT
-0.05
Subconsultant/ Subcontractor:
GATE LEVEL 0.00
Drawing title:
TOP OF ROOF PLAN DRIVEWAY
Designed by:
DINA HADDADIN
Original Scale
1:100
Drawn
Checked
MARAH ALABDALLAT
DINA HADDADIN
Date: AUGUST-2022
Date:
Project Number
123
SEP-2022
Authorised
Plot Size --
Date:
-
Sheet #
A07-004a
A1 Rev
R-01
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS. KEYPLAN:
L OT P
L
MI
T
L I
P
L OT
I MI T
2345
04
05
06 07 09
12
13
629
B 2 A009-0
1000
1000
1000
10 11
626
02 03
552
01
Maneuvering Parking
9 85 400
A
A1
400
B 44
PUMP ROOM & BALANCE TANK 26m2
0
A2
-3.20
C 456
3793
SHOW GARAGE 192 m2
D
-3.15
-3.18
MAID'S 19 m2
ENTRANCE
A SHISH E G N U O L 2 m 0 2
Authorized
Rev
Date
Authorized
A
N SUNKE EN GARD
A4
3794
400
400
A5
A A009-1
Purpose of issue -3.20
KIT
F
Checked
A009-1
414
124
Date
A3
-3.15
385
E
Description
Rev
Client:
473 -3.20
SERVICE ENTRANCE
G
A6
-3.15 -3.15
H
Project Title:
ELEC. 6 m2
J
SERVICE ENTRANCE
570
MECHANICAL 12 m2
LAUNDRY 12 m2
G GAMIN M OO R N E OP 26 m2
K
A CINEM 2 25.0 m
A7
-3.15
N
WATER TANK 12 m2
796
SCREE
PUMP ROOM & BALANCETANK 13 m2
400
L B 2
A009-0
Main Contractor:
572
600
714
620
08
P
L I
MI
L OT
T
L I
MI
P
T
Subconsultant/ Subcontractor:
3812
Drawing title:
BASEMENT FUR. PLAN Designed by:
DINA HADDADIN
Original Scale
1:100
Drawn
Checked
MARAH ALABDALLAT
DINA HADDADIN
Date: AUGUST-2022
Date:
Project Number
123
SEP-2022
Authorised
Plot Size --
Date:
-
Sheet #
A07-005
A1 Rev
R-01
L OT
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS. KEYPLAN:
L OT P
L
PARKW A ENTRA Y NCE
T
I MI T
P
L OT
MI L I
02 03 04 SUNKEN SUNKEN LOUNGE
05
LOUNGE 23.0 m2 FIRE PIT
+0.45
2345
06 07 09 FIRE PLACE
01
JACUZZI 11 m2
10 11
FIRE PLACE +0.45
FIRE PIT
12
13
SWIMMING POOL -1.35 56 m2
+0.40
1201
1259
1266
-0.20
+0.20
-0.20 C
+0.35
+0.35
A009-03
OUTDOOR LIVING 57.0 m2
400
A
B 2 A009-0
COUNTER
A1
400 +0.40
B
+0.40 -3.20
BBQ
401
A2
-0.20
C +0.35
OPEN TO SKY OPEN TO SKY
OPEN TO ABOVE
SHOW KITCHEN 30.0 m2
LIVING
DINING
A A009-1
BANQUETING AREA 6.20m2
407
E
TOILET 4.30 m2
+0.40
37.0 m2
Description
Rev
Date
Checked
Authorized
Rev
Date
Authorized
A
n Sunke n e d r Ga
A009-1
A4
3794
561
124
A3
TV
3793
D
2 55.0 m
400
A5
SUITE GUEST 2 26.0 m
Purpose of issue
F
OPEN TO SKY
Client:
REFLECTIVE POOL REFLECTIVE POOL
CHEF'S KITCHEN 14.40 m2
G
-3.20
A6
950x20cm
H
40x80cm 200x20cm
+0.45
+0.45
Project Title:
J
554
PANTRY
735
K
+0.40 SIDE ENTRANCE SIDE ENTRANCE
TOILET 8.50 m2
REFLECTIVE POOL
+0.35
FOYER 14.0 m2
SUITE GUEST 2 28.0 m SUITE GUEST 2 30.0 m
MAIN ENTRANCE MAIN ENTRANCE
A7
+0.40
400
+0.40
400 C A009-03
-0.20
L
603
+0.35 B
FFL
MI
08
L OT
0.00
0.00 +0.05
T
P 0.00
ETER
3812
MI
LPG M
L I
L OT
L I
+0.35
-0.05
P
T
Main Contractor:
2
A009-0
600
GARBA GE ELECT. RM RM. +7.66 UTILITY FFL ROOM+7.66
665
965
+0.35
Subconsultant/ Subcontractor:
GATE LEVEL 0.00
Drawing title: DRIVEWAY
GROUND FLOOR PLAN Designed by:
DINA HADDADIN
Original Scale
1:100
Drawn
Checked
MARAH ALABDALLAT
DINA HADDADIN
Date: AUGUST-2022
Date:
Project Number
123
SEP-2022
Authorised
Plot Size --
Date:
-
Sheet #
A07-006
A1 Rev
R-01
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
L OT
P
PARKW A ENTRA Y NCE
KEYPLAN:
L I MI T
P
L OT
MI
T
L I
01
02 03 SUNKEN 04
05
LOUNGE
06 07 09 JACUZZI
FIRE PIT
10 11
FIRE PLACE +0.45
+0.45
12
13
SWIMMING POOL -1.35
+0.40
902
1068
1198
+0.20 -0.20 C
+0.35
1014
1000
1260
-0.20
+0.35
A009-03
edge of canopy
400
A
B 2 A009-0
COUNTER
401 A1
400
Semi-Covered Balcony 11 m2 +0.40+4.80
453
B
edge of canopy
limit of pergola BBQ
TERRACE 30 m2
400
A2
-0.20
FAMILY ROOM 24.0 m2
C Master 42.0 m2
OPEN TO SKY OPEN TO SKY
open to below
open to sky
A3 Description
Rev
513 +4.85
3793
D
SUITE GUEST 2 27.0 m
124
405
F
OPEN TO SKY
647
G
Checked
Authorized
Rev
Date
Authorized
A4
A5
open to below
A A009-1
E
A A009-1
3794
400
en Sunk n d Gar e
Date
Purpose of issue
SUITE GUEST 2 28.0 m
Client:
REFLECTIVE POOL
A6
H +4.85
J
open to sky
K 844
Project Title: open to below
Master 42.0 m2
SIDE ENTRANCE REFLECTIVE POOL OPEN TO SKY BALCONY 5 m2
778
Master 2 42.0 m
MAIN ENTRANCE +0.40
400 C A009-03
400 400
edge of canopy
d Covere
L
A7
y 5 m2
Balcon
-0.20
782
603
B 2 A009-0
0.00
0.00 +0.05
T
P GATE LEVEL
MI
0.00
L I
MI
08
L OT
-0.05
P
+0.35
T
Main Contractor:
600
UTILITY ROOM
L OT
L I
+0.35
665
850
edge of canopy
1001
+0.35
Subconsultant/ Subcontractor: 0.00
DRIVEWAY
Drawing title:
FIRST FUR. PLAN Designed by:
DINA HADDADIN
Original Scale
1:100
Drawn
Checked
MARAH ALABDALLAT
DINA HADDADIN
Date: AUGUST-2022
Date:
Project Number
123
SEP-2022
Authorised
Plot Size --
Date:
-
Sheet #
A07-007
A1 Rev
R-01
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS. KEYPLAN:
L OT
P
L
PARKW A ENTRA Y NCE
T
I MI T
P
L OT
MI L I
01
02 03 SUNKEN 04
5 06 0723409
05
LOUNGE
JACUZZI
FIRE PIT
10 11
FIRE PLACE +0.45
+0.45
12
13
SWIMMING POOL -1.35
+0.40
902
840
1198
1208
+0.20
-0.20 C
+0.35
1014
1000 1000
1260 1067 1068
-0.20
+0.35
A009-03
edge of canopy
4001
B
400
A
edge of canopy
2
A009-0
COUNTER
453
B
A1
400
Semi-CoveredCANOPY Balcony 11 m2 +0.40+4.80
limit of pergola BBQ
TERRACE 30 m2
400
A2
-0.20
FIRE PIT FAMILY ROOM 24.0 m2 +8.60
C Master 42.0 m2
OPEN TO SKY OPEN TO SKY
open to sky
open to below ROOF LOUNGE 42m2
+9.20
A3
513 6
3793
D
Jacuzzi 6 m2
SUITE GUEST 2 27.0 m
+4.85
406
Checked
Authorized
4050
Rev
Date
Authorized
A
A009-1
A4
A5
+8.65
F
Purpose of issue
OPEN TO SKY
SUITE GUEST 2 28.0 m
SERVICE AREA
Client:
+8.60
647
G
2
00m
BBQ 2
open to below
A A009-1
n Sunke n e d r Ga
33779944
E
Date
+8.90
400
124
Description
Rev
REFLECTIVE POOL OPEN TO SKY
A6 +8.60
H +4.85
J
open to sky
K 837844
Project Title: open to below
Master 42.0 m2
A
E ARE SEaRsVteIC r M 02.0 m2 +8.64
SIDE ENTRANCE REFLECTIVE POOL OPEN TO SKY BALCONY 5 m2
778
MAIN ENTRANCE +0.40
400
5 alcony
C B A009-03
-0.20
440000 400
edge of canopy
dB Covere
L
A7
m2
+9.45
782
603
1001
CANOPY +0.35
08
L OT
-0.05
0.00
0.00 +0.05
P
T
3812
MI
0.00
L I
MI
Main Contractor:
P
L OT
L I
2
665 665
B
A009-0
60 600
T
+0.35
600
UTILITY ROOM
ENTRY FRAME edge of canopy +8.25
869
88354 0
+0.35
Subconsultant/ Subcontractor:
GATE LEVEL 0.00
DRIVEWAY
Drawing title:
ROOF FUR. PLAN Designed by:
DINA HADDADIN
Original Scale
1:100
Drawn
Checked
MARAH ALABDALLAT
DINA HADDADIN
Date: AUGUST-2022
Date:
Project Number
123
SEP-2022
Authorised
Plot Size --
Date:
-
Sheet #
A07-008
A1 Rev
R-01
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS. KEYPLAN:
L OT
P
L
T
MI
L I
P
L OT
I MI T
2345
04
05
06 07 09
12
13
629
B 2 A009-0
1000
1000
1000
10 11
626
02 03
552
01
Maneuvering Parking
9 85 400
A
A1
400 1
A12-100
B
PUMP ROOM & BALANCE TANK 26m2
0 44
A2
-3.20
C
Description
Rev
Date
Checked
Authorized
Rev
Date
Authorized
456 W3
SHOW GARAGE 192 m2 -3.15
-3.18
MAID'S 19 m2
ENTRANCE
W6 4 A12-101
A SHISH E LOUNG 20 m2
N SUNKE ARDEN G W4
W1
W6
A
400
A009-1
A4
3794
385 414
124
A3
-3.15
W6
3793
D
W2
3 1 A12-10
400
Purpose of issue
A5
Client:
A A009-1
E
-3.20
KIT
F
473 7
-3.20
SERVICE ENTRANCE
A103
G
Project Title:
A6
-3.15
-3.15
H
W5 ELEC. 6 m2
J
SERVICE ENTRANCE
570
MECHANICAL 12 m2
LAUNDRY 12 m2
G GAMIN M ROO OPEN 26 m2
K
2 0 A12-10
A CINEM 2 m .0 5 2
A7
-3.15
5
796
A12-102
WATER TANK 12 m2
PUMP ROOM & BALANCETANK 13 m2
400 Main Contractor: 6
A12-10
L
2
B 2
600 Subconsultant/ Subcontractor:
08
P
L I
MI
L OT
T
714
620
572
8
A12-103
A009-0
MI
P
T
L I
3812 Drawing title:
BASEMENT ANN. PLAN Designed by:
DINA HADDADIN
Original Scale
Drawn
Checked
MARAH ALABDALLAT
DINA HADDADIN
Date: AUGUST-2022
Date:
Authorised
Plot Size --
1:100 Project Number
123
SEP-2022
Date:
-
Sheet #
A07-009
A1 Rev
R-01
L OT
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS. KEYPLAN:
L OT P
L
T
MI L I
P
L OT
I MI T
02 03 04 SUNKEN LOUNGE
05
23.0 m2 +0.45
2345
06 07 09 FIRE PLACE
01
JACUZZI 11 m2
10 11
13
SWIMMING POOL -1.35 56 m2
+0.45
FIRE PIT
12
+0.40
1201
1259
1266
-0.20
+0.20
-0.20 C
+0.35
+0.35
A009-03
OUTDOOR LIVING 57.0 m2
400
A
B 2 A009-0
COUNTER
+0.40 1
A12-100
B
+0.40 -3.20
BBQ
401
A1
400
A2
-0.20
W10
W13
C +0.35
W11
W11
OPEN TO ABOVE
OPEN TO SKY
SHOW KITCHEN 30.0 m2
W12 LIVING
2 55.0 m
A3
W15
Description
Rev
Date
Checked
Authorized
Rev
Date
Authorized
4 A12-101
3793
DINING
E
A A009-1
W15
1
F
W15
SUITE GUEST 2 26.0 m
G
Purpose of issue Client:
W15
CHEF'S KITCHEN 14.40 m2
A6
W8
950x20cm
H
A5
-3.20
REFLECTIVE POOL
7
400
W15
OPEN TO SKY
A103
A4
3 A12-10
W30
407
TOILET 4.30 m2
+0.40
37.0 m2
A009-1
3794
561
A
n Sunke n e d r Ga
BANQUETING AREA 6.20m2
D
124
W9
40x80cm 200x20cm
+0.45
+0.45
Project Title:
J
554
PANTRY
735
K
+0.35
FOYER 14.0 m2
TOILET 8.50 m2
SUITE GUEST 2 28.0 m
W7
+0.40
SIDE ENTRANCE
MAIN ENTRANCE 5
A12-102
400
A7
+0.40
400
+0.40 C A009-03
W16
+0.35
965 603
MI
-0.05
08
L OT
0.00
0.00 +0.05
T
P R
0.00
3812
MI
LPG M ETE
L I
L OT
L I
Main Contractor:
2
P
T
665
B
A009-0
600
+7.66 FFL
8
ELECT. RM.
A12-103
+0.35
+0.35
2
W16
6
L
A12-10
-0.20
GARBA GE RM +7.66 FFL
0
SUITE GUEST 2 30.0 m
W14 REFLECTIVE POOL
2 A12-10
Subconsultant/ Subcontractor: 0.00
Drawing title:
GROUND ANN. PLAN Designed by:
DINA HADDADIN
Original Scale
1:100
Drawn
Checked
MARAH ALABDALLAT
DINA HADDADIN
Date: AUGUST-2022
Date:
Project Number
123
SEP-2022
Authorised
Plot Size --
Date:
-
Sheet #
A07-010
A1 Rev
R-01
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
L OT
KEYPLAN:
P
L
PARKW A ENTRA Y NCE
T
MI
I MI T
P
L OT
L I
01
02 03 SUNKEN 04
05
LOUNGE
06 07 09 JACUZZI
FIRE PIT
10 11
FIRE PLACE +0.45
+0.45
12
13
SWIMMING POOL -1.35
+0.40
-0.20
+0.20 -0.20 C
+0.35
+0.35
A009-03
edge of canopy
A
B 2 A009-0
COUNTER
A1
Semi-Covered Balcony 11 m2 +0.40+4.80
1
limit of pergola
A12-100
B
edge of canopy
W26
BBQ
W25
TERRACE 30 m2
A2
-0.20
W21
W24 FAMILY ROOM 24.0 m2
C Master 42.0 m2
W22 OPEN TO SKYW22
open to below
OPEN TO SKY
W18
W27
open to sky
W23
A3 4
W27
W9
SUITE GUEST 2 m .0 7 2
+4.85
D
en Sunk n d r a G e
A A009-1
W27
3
W8
OPEN TO SKY
A103
REFLECTIVE POOL
W19
Authorized
Rev
Date
Authorized
A4
Purpose of issue Client:
W27
SUITE GUEST 2 .0 28 m
7
G
Checked
W27
F
W30
open to below
A A009-1
E
Date
A5
1 A12-10
124
Description
Rev
A12-101
A6
H
W30 W18
+4.85
W29
J
K
Master 42.0 m2
W7
open to below
Project Title:
W8
W27
open to sky
SIDE ENTRANCE
0
Master 2 42.0 m
MAIN ENTRANCE
W17 REFLECTIVE
2
A12-10
A7
POOL OPEN TO SKY BALCONY 5 m2 edge of canopy
5
A12-102
+0.40
-0.20
y 5 m2
Balcon
6
2
+0.35
A12-10
C A009-03
L
vered WC2o8
edge of canopy 8
A12-103
+0.35
B
2 A009-0
Main Contractor:
UTILITY ROOM
0.00
MI
0.00 +0.05
T
P GATE LEVEL
MI
0.00
L I
L OT
L I
08
L OT
-0.05
P
+0.35
T
Subconsultant/ Subcontractor: 0.00
DRIVEWAY
Drawing title:
FIRST ANN. PLAN Designed by:
DINA HADDADIN
Original Scale
1:100
Drawn
Checked
MARAH ALABDALLAT
DINA HADDADIN
Date: AUGUST-2022
Date:
Project Number
123
SEP-2022
Authorised
Plot Size --
Date:
-
Sheet #
A07-011
A1 Rev
R-01
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS. KEYPLAN:
L OT
P
L
PARKW A ENTRA Y NCE
T
I MI T
P
L OT
MI L I
01
02 03 SUNKEN 04
05
LOUNGE
06 07 09 JACUZZI
FIRE PIT
10 11
FIRE PLACE +0.45
+0.45
12
13
SWIMMING POOL -1.35
+0.40
902
1068
1198
+0.20 -0.20 C
+0.35
1014
1000
1260
-0.20
+0.35
A009-03
edge of canopy
401
B
400
A
edge of canopy
2
A009-0
COUNTER limit of pergola
1
B
A12-100
453
A1
400
Semi-CoveredCANOPY Balcony 11 m2 +0.40+4.80
BBQ
TERRACE 30 m2
400
A2
-0.20
FIRE PIT FAMILY ROOM 24.0 m2 +8.60
C Master 42.0 m2
OPEN TO SKY OPEN TO SKY
open to sky
open to below ROOF LOUNGE 42m2
+9.20
A3 4
Jacuzzi 6 m2
A12-101
513
SUITE GUEST 2 27.0 m
3793
+4.85
n Sunke n e d r Ga
3794
255
3 112
400 15
open to below
A A009-1
E
90
BBQ 2
2
1
405
Rev
Date
Authorized
A5
Purpose of issue
W29 SUITE GUEST 2 28.0 m
W30
SERVICE AREA
G
A12-10
00m
25
OPEN TO SKY
7
Authorized
A4
+8.65
F +8.60
64 A103 7
Checked
A
A009-1
103
144.5
130
115
124
Date
+8.90
42
D
Description
Rev
Client:
REFLECTIVE POOL OPEN TO SKY
A6
W28
H
+8.60
+4.85
J
open to sky
K 844
Project Title: open to below
Master 42.0 m2
2 0
A12-10
A
E ARE SEaRsVteIC r M 02.0 m2 +8.64
SIDE ENTRANCE REFLECTIVE POOL OPEN TO SKY BALCONY 5 m2
778
+0.40
alcony
-0.20
5 m2
+9.45
850
782
603
1001
08
L OT
0.00
0.00 +0.05
P
T
MI
0.00
L I
MI
Main Contractor:
P
+0.35 -0.05
2
600
L OT
L I
CANOPY
665
B A009-0
2
8
+0.35
A12-103
ENTRY FRAME edge of canopy +8.25
6
+0.35
A12-10
C B A009-03
T
400 400
edge of canopy
dB Covere
L
UTILITY ROOM
A7
5
A12-102
400
MAIN ENTRANCE
Subconsultant/ Subcontractor:
GATE LEVEL 0.00
Drawing title: DRIVEWAY
ROOF ANN. PLAN Designed by:
DINA HADDADIN
Original Scale
1:100
Drawn
Checked
MARAH ALABDALLAT
DINA HADDADIN
Date: AUGUST-2022
Date:
Project Number
123
SEP-2022
Authorised
Plot Size --
Date:
-
Sheet #
A07-012
A1 Rev
R-01
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS. PARKW A ENTRA Y NCE
30
40 30 30
50
10
230
80
60
N
92
KEYPLAN:
150
140
90
325
94
140
+0.40
240
658
115
36
40
75
100
10 10 10 10 100
100
100
100
241
100
460
+0.40
100
100
-0.20 START
100
100
100
100
100
100
100
100
100
48
100
100
70 30 60
30 30 30 30
368
100
778
60
83
100 100 100
30
100 14 105
+0.35
120
100
30 30 30 10 10 10 10
30 30 10 10
140
120
60
343
100
136
110
-0.20
100
228
70 30 30 30 30
220 10 30
30 30 70
+0.35 605
10 15 15
+0.20
30 30
80
-0.20
35
520
80
-1.35
50
60
+0.45
260
150
+0.45
START
50
START
135
143
25 75
76
50
75 25
Description
Rev
Date
Checked
Authorized
Rev
Date
Authorized
n Sunke n e d Gar
124 Purpose of issue
1076
Client:
60
60
141
41
20
MAIN ENTRANCE
588
70
244
240
238
210
630 210
45
337
90
200
90
15 100
SIDE ENTRANCE
45
Project Title:
+0.40
60
256 20 271
60 20
285
60
300
60
20
+0.35
+0.35
20
390
61
60
207
255
-0.20
61
510
20
127
631
Main Contractor:
+0.35
329
460 +0.05 481
61
60
-0.05
128
60
20
314
0.00
0.00
300
130
0.00
Subconsultant/ Subcontractor:
0.00
Drawing title:
EXTERIOR TILING PLAN Designed by:
DINA HADDADIN
Original Scale
1:100
Drawn
Checked
MARAH ALABDALLAT
DINA HADDADIN
Date: AUGUST-2022
Date:
Project Number
123
SEP-2022
Authorised
Plot Size --
Date:
-
Sheet #
A07-050
A1 Rev
R-01
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS. KEYPLAN:
L OT P
L
T
MI L I
P
L OT
I MI T
2345
04
05
06 07 09
12
13
629
B 2 A009-0
1000
1000
1000
10 11
626
02 03
552
01
90 MIN. FIRE RATED WALLS 60 MIN. FIRE RATED WALLS
Maneuvering Parking
9 85 400
A
A1
400
B PUMP ROOM & BALANCE TANK 26m2
0
44
A2
-3.20
C 456
3793
D
-3.15
-3.18
MAID'S 19 m2
ENTRANCE A SHISH E LOUNG 20 m2
Authorized
Rev
Date
Authorized
A
N SUNKE N E D R A G
400
A4
400
A5 Purpose of issue
A A009-1
Client: -3.20
KIT
F
Checked
A009-1
3794
385
E
Date
A3
-3.15
414
124
Description
Rev
SHOW GARAGE 192 m2
473 -3.20
SERVICE ENTRANCE
G
A6
-3.15 -3.15
H ELEC. 6 m2
J
SERVICE ENTRANCE
570
Project Title:
MECHANICAL 12 m2
LAUNDRY 12 m2
G GAMIN M ROO OPEN 26 m2
K
A CINEM 2 m .0 5 2
A7
-3.15
N
WATER TANK 12 m2
796
SCREE
PUMP ROOM & BALANCETANK 13 m2
400
L Main Contractor: B 2 A009-0
572
600
714
620
08
P
L I
MI
L OT
T
L I
MI
P
T
Subconsultant/ Subcontractor:
3812
Drawing title:
BASEMENT FIRE RATING PLAN Designed by:
DINA HADDADIN
Original Scale
1:100
Drawn
Checked
MARAH ALABDALLAT
DINA HADDADIN
Date: AUGUST-2022
Date:
Project Number
123
SEP-2022
Authorised
Plot Size --
Date:
-
Sheet #
A07-100
A1 Rev
R-01
L OT
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
L OT P
PARKW A ENTRA Y NCE
KEYPLAN:
L I MI T
P
L OT
MI
T
L I
02 03 04 SUNKEN SUNKEN LOUNGE
05
LOUNGE 23.0 m2 FIRE PIT
+0.45
2345
06 07 09 FIRE PLACE
01
JACUZZI 11 m2
10 11
FIRE PLACE +0.45
FIRE PIT
12
13
SWIMMING POOL -1.35 56 m2
+0.40
1201
1259
1266
-0.20
+0.20
-0.20 C
+0.35
90 MIN. FIRE RATED WALLS
+0.35
A009-03
60 MIN. FIRE RATED WALLS OUTDOOR LIVING 57.0 m2
400
A
B 2 A009-0
COUNTER
A1
400 +0.40
B
+0.40 -3.20
BBQ
401
A2
-0.20
C +0.35
OPEN TO SKY OPEN TO SKY
OPEN TO ABOVE
SHOW KITCHEN 30.0 m2
LIVING
2
55.0 m
A3 Description
Rev
3793
TV DINING
124
407
E
TOILET 4.30 m2
+0.40
A A009-1
Rev
Date
Authorized
A4
400
A5
SUITE GUEST 2 .0 26 m
F
OPEN TO SKY
Purpose of issue
-3.20
REFLECTIVE POOL REFLECTIVE POOL
CHEF'S KITCHEN 14.40 m2
G
Authorized
A009-1
3794
561
Checked
A
en Sunk n d r a G e
37.0 m2
BANQUETING AREA 6.20m2
D
Date
Client:
A6
950x20cm
H
40x80cm 200x20cm
J
554
PANTRY
735
K
+0.45
+0.45
+0.40 SIDE ENTRANCE SIDE ENTRANCE
TOILET 8.50 m2
REFLECTIVE POOL
+0.35
FOYER 14.0 m2
SUITE GUEST 2 .0 28 m
SUITE GUEST 2 30.0 m
MAIN ENTRANCE MAIN ENTRANCE
A7
+0.40
400
+0.40
400
Project Title:
C A009-03
-0.20
L
603
+0.35 B
2 A009-0
Main Contractor:
FFL
T MI
08
L OT
0.00
0.00 +0.05
T
P 0.00
ETER
3812
GATE LEVEL
MI
LPG M
L I
L OT
L I
+0.35
-0.05
P
600
GARBA GE ELECT. RM RM. +7.66 UTILITY FFL ROOM+7.66
665
965
+0.35
Subconsultant/ Subcontractor: 0.00
DRIVEWAY
Drawing title:
GROUND FIRE RATING PLAN Designed by:
DINA HADDADIN
Original Scale
1:100
Drawn
Checked
MARAH ALABDALLAT
DINA HADDADIN
Date: AUGUST-2022
Date:
Project Number
123
SEP-2022
Authorised
Plot Size --
Date:
-
Sheet #
A07-101
A1 Rev
R-01
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
L OT P
PARKW A ENTRA Y NCE
KEYPLAN:
L I MI T
P
L OT
MI
T
L I
01
02 03 SUNKEN 04
05
LOUNGE
06 07 09 JACUZZI
FIRE PIT
10 11
FIRE PLACE +0.45
+0.45
12
13
SWIMMING POOL -1.35
+0.40
902
1068
-0.20 C
+0.35
90 MIN. FIRE RATED WALLS
1198
+0.20
1014
1000
1260
-0.20
60 MIN. FIRE RATED WALLS
+0.35
A009-03
edge of canopy
401
B
400
A
edge of canopy
2
A009-0
COUNTER
453
B
A1
400
Semi-Covered Balcony 11 m2 +0.40+4.80
limit of pergola BBQ
TERRACE 30 m2
400
A2
-0.20
FAMILY ROOM 24.0 m2
C Master 42.0 m2
OPEN TO SKY OPEN TO SKY
open to below
open to sky
A3 Description
Rev
513 +4.85
3793
D
SUITE GUEST 2 m .0 7 2
n Sunke n e d r a G
124
405
F
OPEN TO SKY
647
G
Authorized
Rev
Date
Authorized
A4
A5
open to below
A A009-1
E
Checked
A
A009-1
3794
400
Date
Purpose of issue
SUITE GUEST 2 .0 28 m
Client:
REFLECTIVE POOL
A6
H +4.85
J
open to sky
K 844
Project Title:
open to below
Master 42.0 m2
SIDE ENTRANCE REFLECTIVE POOL OPEN TO SKY BALCONY 5 m2
778
Master 2 42.0 m
MAIN ENTRANCE +0.40
400
2
ny 5 m
d Balco
C A009-03
400 400
edge of canopy
Covere
L
A7
-0.20
782
603
B
A009-0
0.00
0.00 +0.05
P
T
MI
0.00
GATE LEVEL
L I
MI
08
L OT
-0.05
Main Contractor:
P
+0.35
T
2
600
UTILITY ROOM
L OT
L I
+0.35
665
850
edge of canopy
1001
+0.35
Subconsultant/ Subcontractor: 0.00
DRIVEWAY
Drawing title:
FIRST FIRE RATING PLAN Designed by:
DINA HADDADIN
Original Scale
1:100
Drawn
Checked
MARAH ALABDALLAT
DINA HADDADIN
Date: AUGUST-2022
Date:
Project Number
123
SEP-2022
Authorised
Plot Size --
Date:
-
Sheet #
A07-102
A1 Rev
R-01
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
L OT P
PARKW A ENTRA Y NCE
KEYPLAN:
L I MI T
P
L OT
MI
T
L I
01
02 03 SUNKEN 04
5 06 0723409
05
LOUNGE
JACUZZI
FIRE PIT
10 11
FIRE PLACE +0.45
+0.45
12
13
SWIMMING POOL -1.35
+0.40
902
840
1198
1208
+0.20
-0.20 C
+0.35
1014
1000 1000
1260 1067 1068
-0.20
90 MIN. FIRE RATED WALLS 60 MIN. FIRE RATED WALLS
+0.35
A009-03
edge of canopy
400
A
B 2 A009-0
COUNTER
4001 A1
400
Semi-CoveredCANOPY Balcony 11 m2 +0.40+4.80
453
B
edge of canopy
limit of pergola BBQ
TERRACE 30 m2
400
A2
-0.20
FIRE PIT FAMILY ROOM 24.0 m2 +8.60
C Master 42.0 m2
OPEN TO SKY OPEN TO SKY
open to sky
open to below ROOF LOUNGE 42m2
+9.20
A3
513 6
3793
D
Jacuzzi 6 m2
SUITE GUEST 2 27.0 m
+4.85
124
E
406
BBQ 2
open to below
2
00m
4050
Date
Checked
Authorized
Rev
Date
Authorized
A
A009-1
A4
A5
+8.65
F
OPEN TO SKY
Purpose of issue
SUITE GUEST 2 28.0 m
SERVICE AREA
Client:
+8.60
647
G
n Sunke n e d Gar
33779944
400 A A009-1
Description
Rev
+8.90
REFLECTIVE POOL OPEN TO SKY
A6 +8.60
H +4.85
J
open to sky
K 837844
Project Title: open to below
Master 42.0 m2
A
E ARE SEaRsVteIC r M 02.0 m2 +8.64
SIDE ENTRANCE REFLECTIVE POOL OPEN TO SKY BALCONY 5 m2
778
MAIN ENTRANCE +0.40
400 C B A009-03
-0.20
440000 400
edge of canopy
d Covere
L
A7
y Balcon
5 m2
+9.45
782
603
1001
CANOPY +0.35
0.00
0.00 +0.05
P
T
3812
GATE LEVEL
MI
0.00
L I
MI
08
L OT
-0.05
Main Contractor:
P
L OT
L I
2
665 665
B A009-0
600
T
+0.35
600
UTILITY ROOM
ENTRY FRAME edge of canopy +8.25
869
88354 0
+0.35
Subconsultant/ Subcontractor: 0.00
DRIVEWAY
Drawing title:
ROOF FIRE RATING PLAN Designed by:
DINA HADDADIN
Original Scale
1:100
Drawn
Checked
MARAH ALABDALLAT
DINA HADDADIN
Date: AUGUST-2022
Date:
Project Number
123
SEP-2022
Authorised
Plot Size --
Date:
-
Sheet #
A07-103
A1 Rev
R-01
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS. KEYPLAN:
GLASS HANDRAIL
60
4
Roof floor
60
STRIP LIGHT
60
STRIP LIGHT
320
GLASS HANDRAIL
60
80
Top of Roof floor
80
STRIP LIGHT
5
5
1- FLUTED STONE SLABS 2- 80 CM HIGH PORCELAIN SLAB CLADDING
60
First floor
60
4
1185
60
5
380
5
60
4 5
MATERIAL LEGEND:
60
2
2
2
3
3- 300CM X 100CM PORCELAIN SLAB CLADDING - GRAY
80
3
4
60
2
1
LIMIT OF PLOT
1
4- 60CM X 120CM PORCELAIN MECHANICAL CLADDING - STONE LOOK
60
60
440
1
60
LIMIT OF PLOT
60
5- WOOD FINISH ALUM LOUVERS AND CLADDING
60
360
SOUTH ELEVATION
60
60
80
45
60
Ground floor
60
60
Basement
Description
Rev
Purpose of issue
Date
Checked
Authorized
Rev
Date
Authorized
Client:
60
320
GLASS HANDRAIL
Project Title:
60
Roof floor
60
4
GLASS HANDRAIL
60
80
Top of Roof floor
2
6
2
2
4
4
First floor
60
4
4
2
LIMIT OF PLOT
60
Main Contractor:
SUNKEN GRADEN REFLECTIVE POOL
Basement
80
Subconsultant/ Subcontractor: 60
PLAYROOM
60
EAST ELEVATION
60
4
60
360
60
2
45
30
60
Ground floor
60
LIMIT OF PLOT
60
440
60
60
3
80
60
4
1185
60
6
380
6
60
60
2
80
STRIP LIGHT
Drawing title:
ELEVATIONS Designed by:
DINA HADDADIN
Original Scale
1:100
Drawn
Checked
MARAH ALABDALLAT
DINA HADDADIN
Date: AUGUST-2022
Date:
Project Number
123
SEP-2022
Authorised
Plot Size --
Date:
-
Sheet #
A08-001
A1 Rev
R-01
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS. KEYPLAN:
GLASS HANDRAIL
60
4
60
320
GLASS HANDRAIL
60
80
Top of Roof floor
Roof floor
60
ALUMINUM PERGOLA
2
2
60
2
80
STRIP LIGHT
1- FLUTED STONE SLABS 2- 80 CM HIGH PORCELAIN SLAB CLADDING
60 60
First floor
1185
60
380
60
MATERIAL LEGEND:
STRIP LIGHT
2
3- 300CM X 100CM PORCELAIN SLAB CLADDING - GRAY
80
2
60
2
4- 60CM X 120CM PORCELAIN MECHANICAL CLADDING - STONE LOOK
60
4
LIMIT OF PLOT
60
440
4
60
LIMIT OF PLOT
60
5- WOOD FINISH ALUM LOUVERS AND CLADDING
60
360
60
60
80
45
60
Ground floor
60
60
Basement
NORTH ELEVATION
Description
Rev
Purpose of issue
Authorized
Rev
Date
Authorized
80 ALUMINUM PERGOLA
Roof floor
Project Title:
80
60
ALUMINUM PERGOLA
60
320
GLASS HANDRAIL
60
4
60
2
2
380
4 5
2
3 LIMIT OF PLOT
4
60 80
2
60
4
80
Main Contractor:
60
45
60
Ground floor
60
60
4
440
60
LIMIT OF PLOT
ALUMINUM CANOPY
60
2
60
First floor ALUMINUM CANOPY
1185
60
5
60
60
2
Checked
Client:
Top of Roof floor
GLASS HANDRAIL
Date
60
Basement
60
60
360
4
Subconsultant/ Subcontractor: 60
WEST ELEVATION
Drawing title:
ELEVATIONS Designed by:
DINA HADDADIN
Original Scale
1:100
Drawn
Checked
MARAH ALABDALLAT
DINA HADDADIN
Date: AUGUST-2022
Date:
Project Number
123
SEP-2022
Authorised
Plot Size --
Date:
-
Sheet #
A08-002
A1 Rev
R-01
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS. KEYPLAN:
EXTERNAL SCHEDULE OF FINISHES 300CM X 100CM PORCELAIN SLAB CLADDING - GRAY
60CM X 120CM PORCELAIN MECHANICAL CLADDING - STONE LOOK
MATERIAL IMAGE
FLUTED STONE SLABS
80 CM HIGH PORCELAIN SLAB CLADDING
GRAND TOTAL
Description
Rev
Purpose of issue
Date
Checked
Authorized
Rev
Date
Authorized
AREA
Client:
40M2
190M2
165 M2
400 M2
MARK
Project Title:
1
2
3
4
Main Contractor:
Subconsultant/ Subcontractor:
Drawing title:
EXTERNAL SCHEDULE OF FINISHES
Designed by:
DINA HADDADIN
Original Scale
N.T.S
Drawn
Checked
MARAH ALABDALLAT
DINA HADDADIN
Date: AUGUST-2022
Date:
Project Number
123
SEP-2022
Authorised
Plot Size --
Date:
-
Sheet #
A08-003
A1 Rev
R-01
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS.
5CM SCREED PROTECTION 2 LAYERS 4MM WATER PROOF MEMBRANE 5-15CM MINIMUM CONCRETE SCREED SLOPE TO DRAIN STONE PAVERS SINGLE SIZE WASHED GRAVEL FILTER MEMBRANE 5CM SCREED PROTECTION
80 60 60
320
240
5CM EXTRUDED POLYSTYRENE THERMAL INSULATION 30CM STRUCTURAL SLAB
80
55
60
120
Roof floor
First floor
60 440
Ground floor 55
Basement
CINEMA
60 60 60
TOILET
60
60
305
360
60
85 220
251
310
CAR PARKING
80
60
GUEST SUITE 55
LIVING
45
OUTDOOR LIVING
55
SWIMMING POOL
60
60
360 240
350
LIMIT OF PLOT
385
LIMIT OF PLOT
60
145
60
80
25 55
0
55
55
MASTER BEDROOM
85
60 60
380
LIVING
1185
255
325
246
325
305
60
85
DET 6 A12-032
KEYPLAN:
60
25 55
5-15CM MINIMUM CONCRETE SCREED SLOPE TO DRAIN
55
25 55
120
Top of Roof floor
2 LAYERS 4MM WATER PROOF MEMBRANE
TOILET
5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
60
5CM EXTRUDED POLYSTYRENE THERMAL INSULATION 30CM STRUCTURAL SLAB
TILES & MORTAR SLAB ON GRADE 2 LAYERS 4MM WATER PROOFING MEMBRANE 10CM BLINDING 15CM BASE COURSE
Description
Rev
COMPACTED SOIL (MIN.95%) M.D.D (TYP.)
Date
Checked
Authorized
Rev
Date
Authorized
SECTION A-A
Purpose of issue Client:
80
Project Title:
60
Roof floor
60
60
320
WS 3
120
270
5CM EXTRUDED POLYSTYRENE THERMAL INSULATION 30CM STRUCTURAL SLAB
A12-100
80 60 60 60
1185
Ground floor
80
60 OUTDOOR GARDEN
Basement
60
60
Subconsultant/ Subcontractor:
150
60
SHISHA LOUNGE
60
360
280
305
360
305
291
365
310
305
360
305
60
45
15 25
25 55
55
GUEST SUITE
19
55
34
DINING
55
CHEF'S KITCHEN
60
WATER FALL REFLECTIVE POOL
Main Contractor:
60
LIMIT OF PLOT
60
440
385
440
385
385
440
LIMIT OF PLOT
385
60
60
80
55
55
734.5
25
60
380
302.5
First floor
GUEST SUITE
55
25 5
BATHROOM
325
375
325
380
325
325
60
22.5
50
70
25
60
5-15CM MINIMUM CONCRETE SCREED SLOPE TO DRAIN
TOILET
25
skylight
Top of Roof floor
55
120
270
55
STONE PAVERS SINGLE SIZE WASHED GRAVEL FILTER MEMBRANE 5CM SCREED PROTECTION 2 LAYERS 4MM WATER PROOF MEMBRANE
TILES & MORTAR SLAB ON GRADE
Drawing title:
2 LAYERS 4MM WATER PROOFING MEMBRANE 10CM BLINDING
Designed by:
SECTIONS DINA HADDADIN
15CM BASE COURSE COMPACTED SOIL (MIN.95%) M.D.D (TYP.)
SECTION B-B
Original Scale
1:100
Drawn
Checked
MARAH ALABDALLAT
DINA HADDADIN
Date: AUGUST-2022
Date:
Project Number
123
SEP-2022
Authorised
Plot Size --
Date:
-
Sheet #
A09-001
A1 Rev
R-01
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS. KEYPLAN:
STONE PAVERS SINGLE SIZE WASHED GRAVEL FILTER MEMBRANE 5CM SCREED PROTECTION
Top of Roof floor 80
2 LAYERS 4MM WATER PROOF MEMBRANE
60
5-15CM MINIMUM CONCRETE SCREED SLOPE TO DRAIN
60
A12-102
80 60
380
Description
Rev
Date
Checked
Authorized
Rev
Date
Authorized
60
440
60 60 60
Client:
60 PUMP ROOM & BALANCE TANK
Basement
60
MECHANICAL ROOM
Purpose of issue
60
360
286
305
240
291
291
240
PLANTER 291
80
55 70
40
45 45
Ground floor
FOYER
60
DINING ROOM
REFLECTIVE POOL
45
JACUZZI
60
355
385
LIMIT OF PLOT 360
LIMIT OF PLOT
60
60
740
80
55
85
85
60
First floor
60
STRIP LIGHT
1185
60
325
325
300
60
25
25 55
60
120
Roof floor
60
WS 8
320
5CM EXTRUDED POLYSTYRENE THERMAL INSULATION 30CM STRUCTURAL SLAB
TILES & MORTAR SLAB ON GRADE
Project Title:
2 LAYERS 4MM WATER PROOFING MEMBRANE 10CM BLINDING 15CM BASE COURSE COMPACTED SOIL (MIN.95%) M.D.D (TYP.)
SECTION C-C
Main Contractor:
Subconsultant/ Subcontractor:
Drawing title:
SECTIONS Designed by:
DINA HADDADIN
Original Scale
Drawn
Checked
MARAH ALABDALLAT
DINA HADDADIN
Date: AUGUST-2022
Date:
Authorised
Plot Size --
1:100 Project Number
123
SEP-2022
Date:
-
Sheet #
A09-002
A1 Rev
R-01
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER.
REAR SIDE ROOM 40
-0.05 51
360
40
40
360
40
334
257
40
300
110
52 40
110
0.00
40
KEYPLAN:
POWDER COATED STEEL SLIDING DOOR
NEIG
ELE 2
POWDER COATED STEEL DOOR SIGN AS PER EMMAR REGULATIONS
ARTIFICIAL STONE CLADDING AS PER SAMPLES
PLOT
257
BOR NEIGH
GATE LEVEL 40
41
0.00
600
5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
40 25
54
0.00
360
40
331
+0.05
HBOR PLOT
0.00
4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS.
ELE 3
25
+0.35
1X10 CM POWDER COATED STEEL LOUVERS
ARTIFICIAL STONE CLADDING AS PER SAMPLES
ELE 4
3447 354
642
326
594
40
295
255
40
374
255
40
375
334
40
236
300
110
394
161
40
394
354
40
394
354
40
354
40
205 220
ROAD / FRONT SIDE 15
60
180 120
25
58
295
ELE 1
0.0/ FRONT SIDE ROAD
UT R
0
REAR
PARKW ENTRAN
ELEVATION -1
40
270
30
270
30
270
30530
270
30
270
30 3795
270
30
270
30530
270
30
270
30
270
30 42
343
Description
Rev
300
305
300 30
300
35
300
270
30 30
270
30
300
35
300
270
270
30 30
270
30
270
30
300 30
270
300 30
Authorized
Rev
Date
Authorized
400
270
30 42 40
270
180 195
30
15
270
25
30
Checked
DECORATIVE EXTERNAL PAINT OVER SAND CEMENT RENDER. PATTERN, DESIGN, TEXTURE / AS EMMAR SELECTION
180 220
270
50MM EXPANSION JOINT AS/STRUCT. DESIGN
15
REAR
40
DECORATIVE EXTERNAL PAINT OVER SAND CEMENT RENDER. PATTERN, DESIGN, TEXTURE / AS EMMAR SELECTION 3775 300 300
343 ROAD / FRONT SIDE
50MM EXPANSION JOINT AS/STRUCT. DESIGN
Date
Purpose of issue Client:
ELEVATION -2 Project Title:
+0.40
n en
298
30
270
30 30 5
270
30
270
30
270
30
270
30 30 5
270
30
270
30
270
30
270
30 30 5
270
30
207
42
Main Contractor:
Subconsultant/ Subcontractor: 50MM EXPANSION JOINT AS/STRUCT. DESIGN
DECORATIVE EXTERNAL PAINT OVER SAND CEMENT RENDER. PATTERN, DESIGN, TEXTURE / AS EMMAR SELECTION
50MM EXPANSION JOINT AS/STRUCT. DESIGN
DECORATIVE EXTERNAL PAINT OVER SAND CEMENT RENDER. PATTERN, DESIGN, TEXTURE / AS EMMAR SELECTION
50MM EXPANSION JOINT AS/STRUCT. DESIGN
DECORATIVE EXTERNAL PAINT OVER SAND CEMENT RENDER. PATTERN, DESIGN, TEXTURE / AS EMMAR SELECTION
3682 300
40 30
270
30
300
35
300
270
30530
270
300 30
270
300 30
270
30
300
35
300
270
30 30
270
300 30
270
300 30
270
30
300
35
300
270
30 30
270
30
208
35
178
40
25
35
Drawing title: 180 220
BOUNDARY WALL Designed by:
DINA HADDADIN
15
0.00
40
Original Scale
ELEVATION -4
1:100
Drawn
Checked
MARAH ALABDALLAT
DINA HADDADIN
Date: AUGUST-2022
Date:
Project Number
123
SEP-2022
Authorised
Plot Size --
Date:
-
Sheet #
A10-001
A1 Rev
R-01
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS.
41
179
40
301
40
302
40
4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS.
36
304
40
300
40
301
40
3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 175
120
40
5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
300
40
300
40
300
40
340
300
40
160
214
300
40
174
40
120
40
120
70
15 60
95
205
40
340
220
174
340
40
40
340
ALUMINUM DOOR
15
340
214
KEYPLAN:
ARTIFICIAL STONE CLADDING AS PER SAMPLES
1X10 CM POWDER COATED STEEL LOUVERS 2327
25
ARTIFICIAL STONE CLADDING AS PER SAMPLES
ELEVATION -3
207
30
270
5 30 30
270
30
270
30
270
30
5 30 30
270
270
30
EN-1
1
270
30
270
30
BOUNDARY WALL PLAN
B A12-004
A12-004
ELE
SCALE 1:100
208 30
30
298
40
DECORATIVE EXTERNAL PAINT OVER SAND CEMENT RENDER. PATTERN, DESIGN, TEXTURE / AS EMMAR SELECTION
300
35
270
30 30
INTERIOR ELEVATION -4
004
50MM EXPANSION JOINT AS/STRUCT. DESIGN
178
270
538
94
94
50MM EXPANSION JOINT AS/STRUCT. DESIGN
94
94
94
94
DECORATIVE EXTERNAL PAINT OVER SAND CEMENT RENDER. PATTERN, DESIGN, TEXTURE / AS EMMAR SELECTION
94
94
94
94
94
94
94
94
40
50MM EXPANSION JOINT AS/STRUCT. DESIGN
179
30
300
35
300
270
30530
270
30
300
35
270
30 40 25
40
5 30 30
ELE
004
DECORATIVE EXTERNAL PAINT OVER SAND CEMENT RENDER. PATTERN, DESIGN, TEXTURE / AS EMMAR SELECTION 35
270
n en
+0.40
42
0.00
B A12-008
Description
Date
Checked
Authorized
Rev
Date
Authorized
220 180
Rev
15
DET D A12-009
PLAYROOM
Purpose of issue
40 2
COPING BEAM AS/STR
INTERNAL ELEVATION
Client:
SCALE 1:100
39.7
42.9
Project Title:
100
175
100
COLUMN AS/STR
8 47
8 47
8 47
7
BLOCK WORK ENLARGEMENT -1 SCALE 1:20
PLOT LIMIT
30
3
4MM PROTECTION BOARD Main Contractor:
2LAYER 4MM SBS MEMBRANE 25
WATER PROOFING AS PER SPEC. 100mm THK. PCC (TYP.) 200mm COMPACTED ROAD BASE 1000 GAUGE POLYTHENE SHEET COMPACTED SOIL (MIN.95%) M.D.D. (TYP.)
75
SHORING SYSTEM Subconsultant/ Subcontractor:
CONCRETE PLANKS
Drawing title:
BOUNDARY WALL
WATER LEVEL
Designed by:
DINA HADDADIN
Original Scale
1:100 4
SECTION -B SCALE 1:20
FOOTING DESIGN AS PER STRUCTURAL DRAWINGS
Drawn
Checked
MARAH ALABDALLAT
DINA HADDADIN
Date: AUGUST-2022
Date:
Project Number
123
SEP-2022
Authorised
Plot Size --
Date:
-
Sheet #
A10-002
A1 Rev
R-01
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS. KEYPLAN:
INSIDE INSIDE
Description
Rev
Purpose of issue
OUTSIDE
OUTSIDE
Date
Checked
Authorized
Rev
Date
Authorized
Client:
Project Title:
Main Contractor:
Subconsultant/ Subcontractor:
Drawing title:
BOUNDARY WALL Designed by:
DINA HADDADIN
Original Scale
1:20
Drawn
Checked
MARAH ALABDALLAT
DINA HADDADIN
Date: AUGUST-2022
Date:
Project Number
123
SEP-2022
Authorised
Plot Size --
Date:
-
Sheet #
A10-003
A1 Rev
R-01
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS.
30 30
30
30
30
30
30
30
30
90
30
30
30
30
30
30
30
30
30
30
KEYPLAN:
120
120
120
-3.15
5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
A A12-002
30
160
A A12-002
30
23 X 30W X 15.7H CM 1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
BASEMENT FLOOR PLAN
30
30
30
30
30
30
30
30
30
90.1
30
30
30
30.1
30
30
30
30.1
30
30
105 A A12-002
30
160
A A12-002
30
24
25
26
27
28
30
29
31
32
33
34
120
+0.45 120
+0.45
12
13
14
15
16
17
18
19
20
21
22
23
Description
Rev
Date
Checked
Authorized
Rev
Date
Authorized
GROUND FLOOR PLAN
Purpose of issue Client:
30
30
30
30
30
30.1
30
90
30
30
30
30
30
30
30
30
30
30
30
30
30
155
+4.85
120
120
A A12-002
30
A A12-002
30
Project Title: 50
51
52
53
54
55
56
57
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
FIRST FLOOR PLAN
Main Contractor:
+8.65
Subconsultant/ Subcontractor: 30
30
30
30
30
30
30
30
30
30
30
30
30
130
120
120
A A12-002
30
A A12-002
30
Drawing title: 58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
STAIRCASE ENLARGEMENT
73
Designed by:
DINA HADDADIN
Original Scale
1:25
ROOF FLOOR PLAN
Drawn
Checked
MARAH ALABDALLAT
DINA HADDADIN
Date: AUGUST-2022
Date:
Project Number
123
SEP-2022
Authorised
Plot Size --
Date:
-
Sheet #
A12-001
A1 Rev
R-01
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS. STONE PAVERS SINGLE SIZE WASHED GRAVEL FILTER MEMBRANE 5CM SCREED PROTECTION
KEYPLAN:
2 LAYERS 4MM WATER PROOF MEMBRANE 5-15CM MINIMUM CONCRETE SCREED SLOPE TO DRAIN
Top of Roof floor
60
265
60
320
60
80
5CM EXTRUDED POLYSTYRENE THERMAL INSULATION 30CM STRUCTURAL SLAB
60
Roof floor
73 72
80
71 70 69 68 67
60
66 65
61 60
15.8
30
90
15.8
56 30
62
59 58
57
55
60
1185
0W X3
5.8 X1
380
24 83
MATCH LINE -1
63
M HC
230
245.9
MATCH LINE -2 325
60
380
60
64
54 53 52 51
60
First floor
50 49
hidden light with diffuser
49 48
80
55
47 46 45 44
1.2cm quatrz slab 3
60
43 42
DET 1
33
A12-002
41 40
Date
Checked
Authorized
Rev
Date
Authorized
385
34
2
90
440
35
16.9
X1
30
16.9
H
6.9
0W
3 6X
37 36
CM
3
60
317.3
90
38
10
440
Description
Rev
39
60
LIMIT OF PLOT
3
3
33
60
32
(4*4)steel tube
31 30
60
29 28 27 26
Purpose of issue
25
60
365.3
24 23
21
55
80
Client:
23 22
24.9
Ground floor
20
steel carriage as per supplier structural design
19 18 17
60
16
90
15
305
X 23
W
30
12 11
90
15.7
X1
CM
Project Title:
15.7
60
360
13 40
H 5.7
15.7
14 40
10
60
9 8 7 6
60
5 4 3 2
Basement
DETAIL -1
SLAB ON GRADE 2 LAYERS 4MM WATER PROOFING MEMBRANE 10CM BLINDING 15CM BASE COURSE COMPACTED SOIL (MIN.95%) M.D.D (TYP.)
60
1
TILES & MORTAR
SECTION Main Contractor:
Subconsultant/ Subcontractor:
Drawing title:
STAIRCASE ENLARGEMENT Designed by:
DINA HADDADIN
Original Scale
1:50
Drawn
Checked
MARAH ALABDALLAT
DINA HADDADIN
Date: AUGUST-2022
Date:
Project Number
123
SEP-2022
Authorised
Plot Size --
Date:
-
A1
Sheet #
Rev
A12-002
R-01
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS. 73 72
3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS.
71 70 69
5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
68 67 66
KEYPLAN:
65
0W
325
61 60
30
15.8
57
90
15.8
56 30
62
59 58
MATCH LINE -2 MATCH LINE -1
5.8
X3
83
24
X1
63
M HC
380
230
245.9
64
55 54 53 52 51 50 49
49 48
55
47 46 45 44 43 42
DET 1 A12-002
41 40 39
90
X
34
36 35
Authorized
90
30
Rev
Date
Authorized
440
6
Checked
37
16.9
X1
Date
16.9
317.3 385
26
W 30
CM .9H
Description
Rev
38
33 32 31
Purpose of issue
30 29
Client:
28 27 26 25
365.3
24 23 22
Project Title:
24.9
23
55
21 20 19 18 17 16
90
15
M
305
23
W
X
HC
12 11
90
15.7
0 X3
.7 15
15.7
13 40
15.7
14 40
Main Contractor:
10
9 8 7 6 5 4 3 2 1
TILES & MORTAR
Subconsultant/ Subcontractor:
SLAB ON GRADE 2 LAYERS 4MM WATER PROOFING MEMBRANE 10CM BLINDING 15CM BASE COURSE COMPACTED SOIL (MIN.95%) M.D.D (TYP.)
Drawing title:
STAIRCASE ENLARGEMENT Designed by:
DINA HADDADIN
Original Scale
1:25
Drawn
Checked
MARAH ALABDALLAT
DINA HADDADIN
Date: AUGUST-2022
Date:
Project Number
SECTION - PART(1)
123
SEP-2022
Authorised
Plot Size --
Date:
-
Sheet #
A12-003
A1 Rev
R-01
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. STONE PAVERS SINGLE SIZE WASHED GRAVEL FILTER MEMBRANE 5CM SCREED PROTECTION
4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS.
2 LAYERS 4MM WATER PROOF MEMBRANE
5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
5-15CM MINIMUM CONCRETE SCREED SLOPE TO DRAIN 5CM EXTRUDED POLYSTYRENE THERMAL INSULATION 30CM STRUCTURAL SLAB
265
KEYPLAN:
73 72 71 70 69 68 67 66
Description
Rev
65
Date
Checked
Authorized
Rev
Date
Authorized
64 63
X3
83
60
15.8
30
90
Purpose of issue
15.8
56 30
61
59 58
57
62
5 X1
380
0W
24
325
MATCH LINE -2 MATCH LINE -1
230
245.9
M
C .8H
Client:
55 54 53 52 51 50 49
49
Project Title:
48 55
47 46 45 44 43 42
DET 1 A12-002
41 40 39
26
34
35
90
30
440
36
M 16.9
0W X3
C .9H 6 X1
Main Contractor:
37
16.9
385
317.3
90
38
33
Subconsultant/ Subcontractor:
32 31 30 29 28 27
Drawing title:
STAIRCASE ENLARGEMENT
26 25
Designed by:
23
365.3
24
DINA HADDADIN
Original Scale 23
1:25
Drawn
Checked
MARAH ALABDALLAT
DINA HADDADIN
Date: AUGUST-2022
Date:
Project Number
SECTION - PART(2)
123
SEP-2022
Authorised
Plot Size --
Date:
-
Sheet #
A12-004
A1 Rev
R-01
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS.
230
30
30
30
30
30
30
30
30
30
30
30
30
3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER.
120
C A12-006
145
C A12-006
120
445
19
18
17
16
15
14
13
12
11
10
9
8
7
1
2
3
4
5
6
KEYPLAN:
B A12-006
30
30
30
30
120
20 X 30W X 18H CM
B A12-006
20
30
5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
280
21
40
22
4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS.
30
120
BASEMENT FLOOR PLAN
130
30
30
30
30
30
30
30
30
15
14
30
30
30
30
30
30
13
12
11
10
9
8
60
C A12-006
130
130
C A12-006
610
22
21
20
19
18
17
16
7
6
Description
Date
Checked
Authorized
Rev
Date
Authorized
B A12-006
B A12-006
Rev
GROUND FLOOR PLAN Purpose of issue Client:
Project Title:
22 21 20 19 18 17 16 15 14
12
16
X3
0W
11
207
13
X1
6.4
H
10
Main Contractor:
CM
9 8 7 6
H 6.4
TILES & MORTAR SLAB ON GRADE
0W
3 6X
2 LAYERS 4MM WATER PROOFING MEMBRANE 10CM BLINDING
X1
CM
150
5
Subconsultant/ Subcontractor:
4
3
2
15CM BASE COURSE COMPACTED SOIL (MIN.95%) M.D.D (TYP.)
1
Drawing title:
STAIRCASE ENLARGEMENT Designed by:
DINA HADDADIN
Original Scale
1:25
SECTION
Drawn
Checked
MARAH ALABDALLAT
DINA HADDADIN
Date: AUGUST-2022
Date:
Project Number
123
SEP-2022
Authorised
Plot Size --
Date:
-
Sheet #
A12-005
A1 Rev
R-01
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS. KEYPLAN:
STONE PAVERS SINGLE SIZE WASHED GRAVEL FILTER MEMBRANE 5CM SCREED PROTECTION 2 LAYERS 4MM WATER PROOF MEMBRANE 5-15CM MINIMUM CONCRETE SCREED SLOPE TO DRAIN
360
385
25
5CM EXTRUDED POLYSTYRENE THERMAL INSULATION 30CM STRUCTURAL SLAB
2cm porcelain tread mortar bed galv. steel angle to support tread Up-stand
35
22 21
5
55
20 DET 1
19
16.36
6.36 10
special adhesive
Description
Rev
Date
Checked
Authorized
Rev
Date
Authorized
Hidden light Porcelain riser Mortar
30
Purpose of issue
A12-006
Client:
18 17 16
16
15
X3
0W
14 13
X1
6.4 H
CM Project Title:
207
12 11 10 9 8 7
6
TILES & MORTAR SLAB ON GRADE 2 LAYERS 4MM WATER PROOFING MEMBRANE 10CM BLINDING 15CM BASE COURSE COMPACTED SOIL (MIN.95%) M.D.D (TYP.)
Main Contractor:
Subconsultant/ Subcontractor:
SECTION
Drawing title:
STAIRCASE ENLARGEMENT Designed by:
DINA HADDADIN
Original Scale
1:25
Drawn
Checked
MARAH ALABDALLAT
DINA HADDADIN
Date: AUGUST-2022
Date:
Project Number
123
SEP-2022
Authorised
Plot Size --
Date:
-
Sheet #
A12-006
A1 Rev
R-01
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS.
DETAIL A
12
11
10
9
8
7
6
5
4
3
2
1
3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER.
49.5
110
4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS.
28
30
30
30
30
30
30
30
30
30
30
30
236.5
-3.20 13
14
15
C A12-00
6
16
17
18
19
SECTION B
-3.20
20
21
22
23
24
110
178.5
30
30
30
30
30
10cm washed gravel
7*7cm galv. steel angle 2cm porcelain tiles Mortar slab on grade
1cm tiles as specified 3cm mortar
30
30
5 cm screed topping
6
30
30
C A12-00
30
KEYPLAN: B A12-008
-1.40
B A12-00
204
161.5
5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
30
water proofing membrane
5
5cm screed slope to drain
7.5
PLAN
30
REFLECTIVE POOL
DET D
4
GLASS HANDRAIL
10
A12-007
DET C
20
A12-007
SLOPE
24
30
23
M
HC
DET B A12-007
X 12
W
30
5 X1
22 21
20
DETAIL A
19
20cm structural slab 0.6 mm vapour barrier
18
5cm concrete blinding
17
15cm base coarse 16
compacted fill
Description
Rev
15
Date
Checked
Authorized
Rev
Date
Authorized
14 13 12
10
GLASS HANDRAIL
9 hidden light with diffuser
8
X3
3
1.2cm quatrz slab
X1
5H
5
33 CM
TILES & MORTAR
4
Client:
SLAB ON GRADE 2 LAYERS 4MM WATER PROOFING MEMBRANE 10CM BLINDING
3 2
Purpose of issue
3
3
0W
6
10
12
7
3
DET A
(4*4)steel tube
A12-007
15CM BASE COURSE
1
COMPACTED SOIL (MIN.95%) M.D.D (TYP.)
steel carriage as per supplier structural design
Project Title:
DETAIL B SECTION A-A 1cm tiles as specified 3cm mortar 5cm screed topping 4mm torch applied water proofing membrane 5cm screed slope to drain
Main Contractor:
SLOPE
30
water level
Subconsultant/ Subcontractor:
30 SLOPE
15
10 Porcelain Tiles
15
Cement Plate 3 layers water proofing membrane
40
Plaster
Drawing title:
STAIRCASE ENLARGEMENT
25
Reinforced concrete wall
Designed by:
DINA HADDADIN
Original Scale
1:25
DETAIL C
DETAIL D
Drawn
Checked
MARAH ALABDALLAT
DINA HADDADIN
Date: AUGUST-2022
Date:
Project Number
123
SEP-2022
Authorised
Plot Size --
Date:
-
Sheet #
A12-007
A1 Rev
R-01
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS. KEYPLAN:
STONE PAVERS SINGLE SIZE WASHED GRAVEL FILTER MEMBRANE 5CM SCREED PROTECTION 2 LAYERS 4MM WATER PROOF MEMBRANE
230 158.5
230
5-15CM MINIMUM CONCRETE SCREED SLOPE TO DRAIN
Top of Roof floor
5CM EXTRUDED POLYSTYRENE THERMAL INSULATION 30CM STRUCTURAL SLAB
56.5
15
80
30
30 70
70
60
170
110
110 230
170 110 30
170
30
20
20
80.3
30
60.4
S A012-05
S A012-05
S A012-05
S A012-05
170
60
+4.85
320
60
40
40
110
105
15
60
30
30
60
50
50
110
380
230
-3.15
30
Roof floor
Description
Rev
60
First floor
60.4
1185
60.4
FIRST FLOOR PLAN
BASEMENT FLOOR PLAN
Checked
Authorized
Rev
Date
Authorized
60
Purpose of issue Client:
60
60
440
60
60
80.3
Date
60
Ground floor 230
80
30
30
Project Title:
60
170
230
230 170 30
35
100
35
30
60
2 LAYERS 4MM WATER PROOFING MEMBRANE 10CM BLINDING 15CM BASE COURSE COMPACTED SOIL (MIN.95%) M.D.D (TYP.)
Basement 60
S A012-05
30
SLAB ON GRADE
S A012-05
S A012-05
170
110
110
230
S A012-05
170
60
360
40
60
70 +0.45 30
TILES & MORTAR
20
50 30
30
Main Contractor:
65
100
35
30
230
SECTION S - SCALE 1:50 Subconsultant/ Subcontractor:
GROUND FLOOR PLAN ROOF FLOOR PLAN
Drawing title:
ELEVATOR ENLARGEMENT Designed by:
DINA HADDADIN
Original Scale
1:25
Drawn
Checked
MARAH ALABDALLAT
DINA HADDADIN
Date: AUGUST-2022
Date:
Project Number
123
SEP-2022
Authorised
Plot Size --
Date:
-
Sheet #
A12-009
A1 Rev
R-01
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS. KEYPLAN:
single size washed gravel
single size washed gravel
single size washed gravel
DET 2 60
A12-031
DET 2 A12-031 DET 5 A12-031
DET 6
DET 3
A12-031
A12-028
Master Bedroom Guest Suite
DET 4
Description
Rev
Date
Checked
Authorized
Rev
Date
Authorized
A12-028 Master Bedroom
DET 4 A12-028 Purpose of issue
IN
OUT
Guest Suite
Client:
DET 3
A12-028
80
SHOW KITCHEN IN
Guest Suite
OUT
DET 1
Project Title:
A12-031
IN
OUT
Gaming Room Shisha Lounge RAMP
GARAGE
Main Contractor:
Subconsultant/ Subcontractor:
100
WALL SECTION -1 SCALE 1:25
100
WALL SECTION -2 SCALE 1:25
101
WALL SECTION -3
Drawing title:
WALL SECTIONS
SCALE 1:25
Designed by:
DINA HADDADIN
Original Scale
1:25
Drawn
Checked
MARAH ALABDALLAT
DINA HADDADIN
Date: AUGUST-2022
Date:
Project Number
123
SEP-2022
Authorised
Plot Size --
Date: Sheet #
A100
-
A1 Rev
R-01
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS. KEYPLAN:
single size washed gravel single size washed gravel
single size washed gravel
DET 2 ALL POOLS AND REFLECTIVE POOLS DETAILS, TECHNICAL AND MECHANICAL REQUIREMENTS TO BE SUPPLIED BY THE POOL SPECIALISTS. SHOP-DRAWINGS SHALL BE SUBMITTED TO THE ARCHITECT FOR APPROVALS.
A12-031
DET 5 A12-031
DET 3 A12-031 DET 3 A12-028
IN
OUT
DET 6 IN Master Bedroom
OUT
Master Bedroom
A12-031 IN
OUT
Master Bedroom Description
Rev
Date
Checked
Authorized
Rev
Date
Authorized
DET 4 A12-031
DET 7 A12-031 IN
OUT
show kitchen Purpose of issue
IN
TOILET
OUT Client:
WATER PROOFING AS PER SPEC. 100mm THK. PCC (TYP.) 200mm COMPACTED ROAD BASE 1000 GAUGE POLYTHENE SHEET COMPACTED SOIL (MIN.95%) M.D.D. (TYP.)
IN GUEST SUITE
OUT
DET 8 A12-031
WATER LEVEL Project Title:
OUT
IN Maid's Room
DET 12 WATER TANK
LAUNDRY
A12-031
Gaming Room Main Contractor:
Subconsultant/ Subcontractor:
101
WALL SECTION -4 SCALE 1:25
102
WALL SECTION -5 SCALE 1:25
102
WALL SECTION -6
Drawing title:
WALL SECTIONS
SCALE 1:25
Designed by:
DINA HADDADIN
Original Scale
1:25
Drawn
Checked
MARAH ALABDALLAT
DINA HADDADIN
Date: AUGUST-2022
Date:
Project Number
123
SEP-2022
Authorised
Plot Size --
Date: Sheet #
A101
-
A1 Rev
R-01
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS. KEYPLAN:
single size washed gravel
single size washed gravel
D11
254.8 5
A12-008a
45
DET 7
ALL POOLS AND REFLECTIVE POOLS DETAILS, TECHNICAL AND MECHANICAL REQUIREMENTS TO BE SUPPLIED BY THE POOL SPECIALISTS. SHOP-DRAWINGS SHALL BE SUBMITTED TO THE ARCHITECT FOR APPROVALS.
68.2
10
A12-034
DET 7 A12-034
IN
OUT
IN
OUT
Foyer
REFER TO DOOR SCHEDULE FOR DOOR DESIGN
OUT
Master Bathroom Description
Rev
Date
Checked
Authorized
Rev
Date
Authorized
DET C A12-008a
10cm washed gravel 1cm tiles as specified 3cm mortar 5 cm screed topping water proofing membrane 5cm screed slope to drain
IN
OUT
Purpose of issue
IN
Client:
Chef's Kitchen
Project Title:
IN
RAMP LEVEL
20cm structural slab 0.6 mm vapour barrier 5cm concrete blinding 15cm base coarse
IN
compacted fill
Pump Room
Electrical Room
Main Contractor:
Subconsultant/ Subcontractor:
103
WALL SECTION -7 SCALE 1:25
103
WALL SECTION -8
Drawing title:
WALL SECTIONS
SCALE 1:25
Designed by:
DINA HADDADIN
Original Scale
1:25
Drawn
Checked
MARAH ALABDALLAT
DINA HADDADIN
Date: AUGUST-2022
Date:
Project Number
123
SEP-2022
Authorised
Plot Size --
Date: Sheet #
A102
-
A1 Rev
R-01
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER.
120 structural opening
90 structural opening 84
104
94
270 structural opening 267
260
270
305 structural opening
190 structural opening
KEYPLAN:
350 structural opening 347
84
350 structural opening 347
100 structural opening
114
5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
270 structural opening 267
110 structural opening
270 structural opening 267
90 structural opening
35
120 structural opening
4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS.
ALL THE SPECIFICATIONS ARE COMPLIED WITH THE AUTHORITY'S STANDARDS DOOR TYPE
Q: Basement
DESCRIPTION:
Ground WD 01
AS PER ID
1
DOOR TYPE
Q: Basement
DESCRIPTION:
Ground WD 02
First
AS PER ID
DOOR TYPE
Q: Basement
DESCRIPTION:
Ground WD 03
First
Roof
3
AS PER ID
DOOR TYPE
AS PER ID
Ground
First
Roof
Roof
120 structural opening 100 structural opening
104
94
WD 06
AS PER ID
DOOR TYPE
Q: Basement
DESCRIPTION:
Ground
1 WD 07
First
AS PER ID
1
First Roof
Roof
114
120 structural opening 114
110 structural opening
100 structural opening
104
94 Description
Rev
290 structural opening 287
385 structural opening 382
350 structural opening 347
350 structural opening 347
350 structural opening 347
110 structural opening
Q: Basement
DESCRIPTION:
Ground WD 04
First
Roof
1
Date
Checked
Authorized
Rev
Date
Authorized
290 structural opening 287
1
820
Q: Basement
DESCRIPTION:
560 structural opening
DOOR TYPE
Purpose of issue Client:
Q: Basement Ground
AS PER ID
Q: Basement
DESCRIPTION:
Ground
7 WD 09
First
AS PER ID
DOOR TYPE 2 WD 10
First
Roof
Q: Basement
DESCRIPTION:
Ground
DOUBLE SWING DOOR
DOOR TYPE
Roof
Ground
1 WD 11
First
AS PER ID
Q: Basement
DESCRIPTION:
AS PER ID
DOOR TYPE 1 WD 05
First
Roof
Q: Basement
DESCRIPTION:
Ground
REVOLVING DOOR
DOOR TYPE
Roof
WD 12
AS PER ID
First
Roof
100 structural opening
90 structural opening
104
94
84
Project Title:
Ground 2
WD 13
First
3
Roof
100 structural opening
100 structural opening
114
Q: Basement
DESCRIPTION:
Roof
110 structural opening 120 structural opening
DOOR TYPE
Ground
1
First
AS PER ID
Q: Basement
DESCRIPTION:
100
Main Contractor:
94
210 structural opening 207
230 structural opening 227
270 structural opening 267
270 structural opening 267
84
270 structural opening 267
90 structural opening
240
WD 08
DOOR TYPE
240 structural opening
DESCRIPTION:
270 structural opening 267
DOOR TYPE
Subconsultant/ Subcontractor:
Drawing title:
DOORS SCHEDULE Designed by:
DINA HADDADIN
Original Scale DOOR TYPE
DESCRIPTION:
Q: Basement
DOOR TYPE
DESCRIPTION:
Ground WD 14
1
DOOR TYPE
Ground SD01
First Roof
Q: Basement
1
AS PER ID
First Roof
SD02
DESCRIPTION: FIRE RATED LOUVER DOOR AS PER ID
Q: Basement
1
DOOR TYPE
DESCRIPTION:
Ground First Roof
Q: Basement
2
DOOR TYPE
DESCRIPTION:
Ground SD03
LOUVER DOOR AS PER ID
First Roof
Q: Basement
1
DOOR TYPE
Ground SD04
AS PER ID
First Roof
DESCRIPTION:
Q: Basement
1
DOOR TYPE
First Roof
1:50
Q: Basement Ground
Ground AD 01
DESCRIPTION:
AD 02
Checked
MARAH ALABDALLAT
DINA HADDADIN
Date: AUGUST-2022
Date:
Project Number
First Roof
Drawn
3
123
SEP-2022
Authorised
Plot Size --
Date:
-
Sheet #
A12-010
A1 Rev
R-01
NOTES :-
32
120
150.5
150.5
150.5
150.5
445 148.5
148.5
110 110
148.5
1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY.
680 170
170
170
2. DO NOT SCALE FROM THE DRAWINGS.
170
3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER.
280
305
305
305
4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS. KEYPLAN:
Q: Basement
DESCRIPTION:
WINDOW #
1
Q: Basement
DESCRIPTION:
Ground W 01
ALUMINUM CLEAR GLASS WINDOW
1
WINDOW #
First
ALUMINUM CLEAR GLASS WINDOW
ALUMINUM CLEAR GLASS WINDOW
W 03
First
Roof
81
140
Ground
Roof
W 05
First Roof
419.5
140
140
Roof
384.5
358.5 EQ.
1
First
ALUMINUM CLEAR GLASS WINDOW
EQ. 140
Q: Basement
DESCRIPTION:
EQ.
EQ.
EQ.
140 80
122
WINDOW #
360
360
ALL THE SPECIFICATIONS ARE COMPLIED WITH THE AUTHORITY'S STANDARDS 280
90
280
280
360
280
190
80
122
1
Ground
Ground W 02
1147 122
Q: Basement
DESCRIPTION:
80
WINDOW #
Q:
WINDOW #
Q: Basement
DESCRIPTION:
1
WINDOW #
Basement
DESCRIPTION:
Ground W 04
W 06
ALUMINUM CLEAR GLASS WINDOW
Roof
200
124.5
180
175
Q: Basement
DESCRIPTION:
Ground W 10
First
175
50
175
162.5 112.5
WINDOW #
Q: Basement
DESCRIPTION:
Ground
1 W 11
First
ALUMINUM CLEAR GLASS WINDOW
Roof
439.5 114.5
WINDOW #
Ground
First
ALUMINUM CLEAR GLASS WINDOW
3
Q: Basement
DESCRIPTION:
Ground
2 W 12
First
ALUMINUM CLEAR GLASS WINDOW
Roof
213.5
WINDOW #
ALUMINUM CLEAR GLASS WINDOW
Roof
1
First Roof
167
Description
300
Authorized
Rev
Date
Authorized
110 360
360
Client:
250
250
157.5
160
740
Purpose of issue 740
Checked
30
110
60
155
Date
302.5
Rev
WINDOW #
Q: Basement
DESCRIPTION:
WINDOW #
280
280
Project Title:
Q: Basement
DESCRIPTION:
Ground W 07
ALUMINUM CLEAR GLASS WINDOW
DESCRIPTION: Q: Basement
Ground W 08
First
WINDOW #
ALUMINUM CLEAR GLASS WINDOW
First
Roof
Ground 1
W 09
ALUMINUM CLEAR GLASS WINDOW
Roof
WINDOW # 1 W 14
First
Q: Basement
DESCRIPTION:
Ground
ALUMINUM CLEAR GLASS WINDOW
1
Q: Basement
DESCRIPTION: ALUMINUM CLEAR GLASS WINDOW
W 15
First
Roof
WINDOW #
Ground
5
First
Roof
Roof
180
Main Contractor:
1029.5 172.5
172.5
172.5
172.5
167
550
80
172.5
465 EQ.
EQ.
EQ.
117 EQ.
117
80
EQ.
363
280
300
300 360
360
440
Subconsultant/ Subcontractor:
Drawing title:
WINDOWS SCHEDULE Designed by:
DINA HADDADIN
Original Scale WINDOW #
DESCRIPTION:
Q: Basement Ground
W 13
ALUMINUM CLEAR GLASS WINDOW
First Roof
WINDOW #
DESCRIPTION:
Basement Ground
1 W 16
ALUMINUM CLEAR GLASS WINDOW
First Roof
WINDOW #
DESCRIPTION:
2
Q: Basement
WINDOW #
DESCRIPTION:
Ground W 17 ALUMINUM CLEAR GLASS WINDOW
First Roof
Q: Basement
1:50
Drawn
Checked
MARAH ALABDALLAT
DINA HADDADIN
Date: AUGUST-2022
Date:
Ground 1
Project Number
W 18 ALUMINUM CLEAR GLASS WINDOW
First Roof
1
123
SEP-2022
Authorised
Plot Size --
Date:
-
Sheet #
A12-012
A1 Rev
R-01
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS. 60
440
345
EQ.
EQ.
EQ.
385 EQ.
EQ.
420 EQ.
EQ.
3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER.
200 EQ.
100
100
4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS.
WINDOW #
DESCRIPTION:
Basement
ALUMINUM CLEAR GLASS WINDOW
Ground
W 19
WINDOW #
Q: Basement
DESCRIPTION:
WINDOW #
Q: Basement
DESCRIPTION:
Ground 1
First
W 21
First
ALUMINUM CLEAR GLASS WINDOW
Roof
WINDOW #
Q: Basement
DESCRIPTION:
Ground 1
W 22 ALUMINUM CLEAR GLASS WINDOW
Roof
DESCRIPTION:
Ground 2
First
WINDOW #
300
300
300
300
300
300
5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
W 23
Roof
WINDOW #
DESCRIPTION:
Q: Basement
Ground 1
First
ALUMINUM CLEAR GLASS WINDOW
Q: Basement
KEYPLAN:
W 24 ALUMINUM CLEAR GLASS WINDOW
Roof
First
Ground 1
W 25 ALUMINUM CLEAR GLASS WINDOW
First
1
Roof
ALL THE SPECIFICATIONS ARE COMPLIED WITH THE AUTHORITY'S STANDARDS
580 EQ.
80
EQ.
EQ.
EQ. 385
195 285
95
100
240
200
240
300
300
100
100
Description
Rev WINDOW #
Q: Basement
DESCRIPTION:
WINDOW #
Q: Basement
DESCRIPTION:
Ground W 26
1
W 27 ALUMINUM CLEAR GLASS WINDOW
Roof
163.5
DESCRIPTION:
Ground
First
ALUMINUM CLEAR GLASS WINDOW
WINDOW #
First
163.5
WINDOW #
DESCRIPTION:
Ground 6
W 28 ALUMINUM CLEAR GLASS WINDOW
Roof
166
Q: Basement
Authorized
Rev
Date
Authorized
Q: Basement
W 29 ALUMINUM CLEAR GLASS WINDOW 1
First Roof
1
Purpose of issue
100
Checked
Ground
First Roof
Date
5
240
Client:
80
820
1060
300
80
Project Title:
126.5
163.5
Main Contractor:
163.5
166
163.5
360
Subconsultant/ Subcontractor:
Drawing title:
WINDOWS SCHEDULE Designed by:
DINA HADDADIN
Original Scale WINDOW #
DESCRIPTION:
Q: Basement
1:50
Drawn
Checked
MARAH ALABDALLAT
DINA HADDADIN
Date: AUGUST-2022
Date:
SEP-2022
Authorised
Plot Size --
Date:
-
A1
Ground W 30
Project Number ALUMINUM CLEAR GLASS WINDOW
First Roof
1
123
Sheet #
A12-013
Rev
R-01
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS.
3793
3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER.
9 85 4 0 0
ELEC. 6 m2
572
5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
C A12-006
300
C A12-006
456
609
385
414 400
473
570
796
4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS.
KEYPLAN:
0 44
SERVICE ENTRANCE
-3.15
-3.15
10
-3.15
MAID'S 19 m2
LAUNDRY 12 m2
WATER TANK 12 m2
-3.20
-3.20
SHOW GARAGE 192 m2
ME
PUMP ROOM BALANCETA 13 m2
SERVICE ENTRANCE
-3.15
300 387.5
BASEMENT FLOOR PLAN
0.00 +7.66 UTILITY FFL ROOM+7.66 FFL
Description
Checked
Authorized
Rev
Date
Authorized
C A12-006
380.5
610
300
+0.35
C A12-006
A A009-1
+0.40
+0.40 SIDE ENTRANCE SIDE ENTRANCE
-0.05
0.00
GATE LEVEL
+0.00
Date
300
Rev
Purpose of issue Client:
+0.20
+0.35
BBQ
+0.45
COUN
RE
Project Title:
GROUND FLOOR PLAN
60
Main Contractor:
60
Subconsultant/ Subcontractor:
80
60
Ground floor
60
60
440
60
60
80
60
First floor
1185
60
380
60
60
80
60
Roof floor
60
60
320
60
80
Top of Roof floor
60
RAMP ENLARGEMENT
Basement
60
60
360
Drawing title:
Designed by:
60
SECTION S - SCALE 1:100
305
254
60
60CM X 120CM PORCELAIN MECHANICAL CLADDING - STONE LOOK
Original Scale
DINA HADDADIN
1:100
Drawn
Checked
MARAH ALABDALLAT
DINA HADDADIN
Date: AUGUST-2022
Date:
Project Number
123
SEP-2022
Authorised
Plot Size --
Date:
-
Sheet #
A12-018
A1 Rev
R-01
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS. B A12-030
3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER.
C A12-030
10 60
5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS. 50
10 60
4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS.
100
230 330
10
-0.55
350
JACUZZI
130
310
A A12-030
SWIMMING POOL
50
60
+0.45
140 370
80 80
10
80
10
275
50
-1.35
93.5
+0.40 1038
140
240
658
30 418.5
ALL POOLS AND REFLECTIVE POOLS DETAILS, TECHNICAL AND MECHANICAL REQUIREMENTS TO BE SUPPLIED BY THE POOL SPECIALISTS. SHOP-DRAWINGS SHALL BE SUBMITTED TO THE ARCHITECT FOR APPROVALS.
1038
165
343.5
10 30 10 30 10 30 10
83.5
140
100
100
220
220
-0.20
110 120
10 30 15 30 15
320
30
60
30
120
30 10 30 0 30
100
+0.35
10 30 15 30 15 30
100
+0.20
30
60
10
10
300
10
60
30
60
-0.20
50
10 150 80
80
23
A A12-030
+0.45 60 60
60
FIRE PIT 275
10
1032
330
325
360
90
SUNKEN LOUNGE
FIRE PLACE
430 80
10
KEYPLAN:
ALL THE SPECIFICATIONS ARE +0.35 120
778
COMPLIED WITH THE AUTHORITY'S STANDARDS
120
10 30 10 30 10 30 10
B A12-030
C A12-030
POOL & JACUZZI LAYOUT
Description
Rev
Date
Checked
Authorized
Rev
Date
Authorized
DT9
A12-030 2 cm dark grey granite cladding Black gravel Gas fireplace
45
SWIMMING POOL 180
JACUZZI
180
FIRE PIT
45
STRIP LIGHT
45
30
45
45
40
Portable steel tray
Purpose of issue Client:
WATER PROOFING AS PER SPEC. 100mm THK. PCC (TYP.) 200mm COMPACTED ROAD BASE 1000 GAUGE POLYTHENE SHEET COMPACTED SOIL (MIN.95%) M.D.D. (TYP.)
Project Title:
SECTION A-A
DT3
A12-029
30
30
15
15
40
Main Contractor:
15
DT6
170
Subconsultant/ Subcontractor:
45
30
80
40
15
15
15
A12-029
FIRE PIT
SECTION B-B
WATER PROOFING AS PER SPEC. 100mm THK. PCC (TYP.) 200mm COMPACTED ROAD BASE 1000 GAUGE POLYTHENE SHEET COMPACTED SOIL (MIN.95%) M.D.D. (TYP.)
SECTION C-C
WATER PROOFING AS PER SPEC. 100mm THK. PCC (TYP.) 200mm COMPACTED ROAD BASE 1000 GAUGE POLYTHENE SHEET COMPACTED SOIL (MIN.95%) M.D.D. (TYP.)
Drawing title:
POOL & JACUZZI DETAILS Designed by:
DINA HADDADIN
Original Scale
Drawn
Checked
MARAH ALABDALLAT
DINA HADDADIN
Date: AUGUST-2022
Date:
Authorised
Plot Size --
1:50 Project Number
123
SEP-2022
Date:
-
Sheet #
A12-020
A1 Rev
R-01
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER.
DT1
4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS.
A12-021
WATER RESISTANT LIGHT
30.05 29.75
B A12-021
40
240 140
85
5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
HIDDEN LIGHT
29.45
60
50
29.15
28.85
KEYPLAN:
60
30
45
28.85
29.30
45
50
40
30
Master 42.0 m2405
60
30
OPEN TO SK
210
+9.20
open to sky
1cm tiles as specified 3cm mortar 5cm screed topping 4mm torch applied water proofing membrane 5cm screed slope drain 7cm thermal insulation construction slab
40
+9.05
ALL POOLS AND REFLECTIVE POOLS DETAILS, TECHNICAL AND MECHANICAL REQUIREMENTS TO BE SUPPLIED BY THE POOL SPECIALISTS. SHOP-DRAWINGS SHALL BE SUBMITTED TO THE ARCHITECT FOR APPROVALS.
30
+9.50
50
SECTION A-A
+9.20
60
40
50
140
320 50
40
85
60
A A12-021
DT3
DT2
A12-021
A12-021
WATER RESISTANT LIGHT 95
60
320
40
40
80
50
22.52
140 45
40
22.22
210 22.05
85
60
22.07
50
ALL THE SPECIFICATIONS ARE COMPLIED WITH THE AUTHORITY'S STANDARDS
22.82
1.5
21.67 21.42
+8.60
21.62
55
30
28
70
45
10
+8.90
50
A A12-021
140
JACUZZI
160.5
+8.60
21.62
21.42
B A12-021
1cm tiles as specified 3cm mortar 5cm screed topping 4mm torch applied water proofing membrane 5cm screed slope drain 7cm thermal insulation construction slab
ROOF TOP JACUZZI LAYOUT
Description
Rev
Date
Checked
Authorized
Rev
Date
Authorized
SECTION B-B
Purpose of issue Client:
Project Title:
9.80
7cm thermal insulation 30cm structural slab
55 45
25
8.60
16
60
HIDDEN LIGHT
8.65
767
VOID
Main Contractor:
30
8.40
1cm tiles as specified 3cm mortar 5cm screed topping 4mm torch applied water proofing membrane 5cm screed slope drain 7cm thermal insulation construction slab
DETAIL -1 SCALE 1:20
45
30 8.65
HIDDEN LIGHT
9.05 22
single size washed gravel filter membrane 5cm screed protection 2 layers 4mm water proof membrane 5-15cm minimum concrete screed slope to drain
30
30
13
SLOPE
60 30
8.65 30
2cm porcelain coping Mortar bed Water Proofing Up-stand
30
9.05
40
13
50
25
12
45
20
9.50
85
JACUZZI
40
22
HIDDEN LIGHT
8
2cm porcelain coping Mortar bed Water Proofing Up-stand foam concrete work planting soil Filter fabric 9.20 Anti root w.p membrane Water proofing sloped screed
85
120
2cm porcelain coping Mortar bed Water Proofing Up-stand
9.50
45
GLASS FENCE PLANTER
WATER RESISTANT LIGHT
Subconsultant/ Subcontractor:
DETAIL -2 SCALE 1:20
DETAIL -3 SCALE 1:20
Drawing title:
ROOF TOP JACUZZI DETAILS Designed by:
DINA HADDADIN
Original Scale
1:50
Drawn
Checked
MARAH ALABDALLAT
DINA HADDADIN
Date: AUGUST-2022
Date:
Project Number
123
SEP-2022
Authorised
Plot Size --
Date:
-
Sheet #
A12-021
A1 Rev
R-01
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS. KEYPLAN:
1
2
ELE 3 320 190
20
80
10 20 30
210
20
30 20
40
80
ALL THE SPECIFICATIONS ARE COMPLIED WITH THE AUTHORITY'S STANDARDS
FIN. FLR. LVL.
20
ELEV. +0.15 M 15
15
80
GATE LVL.
+0.00 41
DECORATIVE EXTERNAL PAINT OVER SAND CEMENT RENDER PATTERN DESIGN TEXTURE AS/ENGINEERSAPPROVAL
80 60
40
15 20
B
ELE 2
235 220
140
30
20 15
10
340
290 20
+0.15 FFL
10
120 80
10
TOP FINISH LVL. ELEV. +2.35 M A
+0.15 FFL ELE 4
30
ELECT. ROOM
GARBAGE ROOM
A
80 115
20 30
80
A
80
20
50
80
90
80
ELEV. +0.00 M
40
331
LPG METER ELE 1
UTILITY ROOM PLAN
ELEVATION -2
WOODEN LOUVERS
ELEV. +0.15 M
GATE LVL.
GATE LVL.
ELEV. +0.00 M
ELEV. +0.00 M
Date
Checked
Authorized
Rev
Date
Authorized
DECORATIVE EXTERNAL PAINT OVER SAND CEMENT RENDER PATTERN DESIGN TEXTURE AS/ENGINEERSAPPROVAL
15
FIN. FLR. LVL.
ELEV. +0.15 M 15
FIN. FLR. LVL.
Description
Rev
235 220
TOP FINISH LVL. ELEV. +2.35 M
235 220
TOP FINISH LVL. ELEV. +2.35 M
Purpose of issue Client:
SECTION A-A
ELEVATION -3
Project Title:
WOODEN LOUVERS
TOP FINISH LVL. ELEV. +2.35 M
DECORATIVE EXTERNAL PAINT OVER SAND CEMENT RENDER PATTERN DESIGN TEXTURE AS/ENGINEERSAPPROVAL
235 220
235 220
TOP FINISH LVL. ELEV. +2.35 M
ELEV. +0.15 M 15
FIN. FLR. LVL.
ELEV. +0.15 M 15
FIN. FLR. LVL. GATE LVL.
GATE LVL.
ELEV. +0.00 M
ELEV. +0.00 M
ELEVATION -1
DECORATIVE EXTERNAL PAINT OVER SAND CEMENT RENDER PATTERN DESIGN TEXTURE AS/ENGINEERSAPPROVAL
Main Contractor:
ELEVATION -4 Subconsultant/ Subcontractor:
Drawing title:
UTILITY ROOM Designed by:
DINA HADDADIN
Original Scale
1:50
Drawn
Checked
MARAH ALABDALLAT
DINA HADDADIN
Date: AUGUST-2022
Date:
Project Number
123
SEP-2022
Authorised
Plot Size --
Date:
-
Sheet #
A12-025
A1 Rev
R-01
2 A12-26
NOTES :-
3 A12-26
1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS. 10
1 A12-26
600
10
3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER.
1 A12-26 10 16
600
10
4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS.
16
340
STEEL TUBE HIDDEN LIGHT
320
STEEL TUBE FIXED TO WALL
320
340
RETRACTABLE ROLLER BLIND
HIDDEN LIGHT
5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
DET 6
KEYPLAN:
A12-026
1010
LIMIT OF STONE WALL
104
3 A12-26 194
175
LIMIT OF STONE WALL
DET 6
STEEL TUBE FIXED TO WALL
A12-026
HIDDEN LIGHT
4
A12-26
2 A12-26
b
2 A12-26
340
10
2 A12-26
320
ALL THE SPECIFICATIONS ARE COMPLIED WITH THE AUTHORITY'S STANDARDS
600
600
retractable roller blind
DET 6
320 10
1010
5 b 2 1 A -26
1
ROOFTOP GAZEBO PLAN -1
2
SCALE 1:50
PLAN1 A12-26
PLAN1 A12-26
steel tube
10
retractable roller blind 599.5
10
Description
Rev
4
b A12-26
5 b 2 A1 -26
HIDDEN LIGHT
A12-026
Date
Checked
Authorized
Rev
Date
Authorized
ROOFTOP GAZEBO PLAN -2 SCALE 1:500
PLAN1 A12-26
steel tube 1cm cement board 1cm porcelain cladding steel tube
retractable roller blind
steel tube
retractable roller blind
Purpose of issue Client:
16
1cm porcelain cladding
600
Alum. Cladding on Steel Beam Fixed on Wall
hidden light
28
hidden light
steel column
hidden light
1cm cement board 320
272
10cm screed protection
18
320
340 PLAN2 A12-26
2 layers 4mm water proof membrane
filter membrane 2 layers 4mm water proof membrane
30cm structural slab
30cm structural slab
4
1cm porcelain cladding single size washed gravel
3
filter membrane
18
10cm screed protection DET 7
5-15cm minimum concrete screed slope to drain 7cm thermal insulation
SCALE 1:50
PLAN2 A12-26
10cm screed protection
5-15cm minimum concrete screed slope to drain 7cm thermal insulation
ROOFTOP GAZEBO SECTION 01
20
340
single size washed gravel
272
320
300
filter membrane
A12-026
Project Title:
2 layers 4mm water proof membrane 5-15cm minimum concrete screed slope to drain 7cm thermal insulation
6
ROOFTOP GAZEBO WALL BEAM SCALE 1:10
30cm structural slab
ROOFTOP GAZEBO SECTION 02
5
SCALE 1:50
ROOFTOP GAZEBO SECTION 03 SCALE 1:50
Main Contractor: PLAN1 A12-26
PLAN1 A12-26
10
steel tube
340
hidden light 16
steel column 1cm cement board 1cm porcelain cladding
600
28
steel tube steel tube 320
Alum. Cladding on Steel Beam Fixed on Wall
hidden light
16
single size washed gravel PLAN2 A12-26
10cm screed protection
Subconsultant/ Subcontractor:
1cm porcelain cladding
2 layers 4mm water proof membrane
filter membrane 272
320
1cm cement board
single size washed gravel
filter membrane 272
PLAN2 A12-26
3
hidden light
6
599.5
10cm screed protection 2 layers 4mm water proof membrane
5-15cm minimum concrete screed slope to drain 7cm thermal insulation
5-15cm minimum concrete screed slope to drain 7cm thermal insulation
30cm structural slab
30cm structural slab
10
retractable roller blind
retractable roller blind
7
steel tube
28
10
300
3
hidden light
16
single size washed gravel PLAN2 A12-26
DET 6
A12-026
272
steel column 1cm cement board
hidden light
28
28
steel tube
Drawing title:
ROOF TOP GAZEBO DETAILS
Designed by:
DINA HADDADIN
Original Scale
6
ROOFTOP GAZEBO SECTION 04 SCALE 1:50
5
AS SHOWN
ROOFTOP GAZEBO SECTION 03 SCALE 1:50
7
Drawn
Checked
MARAH ALABDALLAT
DINA HADDADIN
Date: AUGUST-2022
Date:
SEP-2022
Authorised
Plot Size --
Date:
-
A1
ROOFTOP GAZEBO BASE SCALE 1:10
Project Number
123
Sheet #
A12-026
Rev
R-01
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS. KEYPLAN:
ALL THE SPECIFICATIONS ARE COMPLIED WITH THE AUTHORITY'S STANDARDS
Description
Rev
1
HD01 - GROUND FLOOR
2
Date
Checked
Authorized
Rev
Date
Authorized
HD02 - GROUND FLOOR
Purpose of issue Client:
Project Title:
Main Contractor:
3
HD03 - GROUND FLOOR
4
HD04 - FIRST FLOOR Subconsultant/ Subcontractor:
Drawing title:
HORIZONTAL DETAILS Designed by:
DINA HADDADIN
Original Scale
1:10
Drawn
Checked
MARAH ALABDALLAT
DINA HADDADIN
Date: AUGUST-2022
Date:
Project Number
123
SEP-2022
Authorised
Plot Size --
Date:
-
Sheet #
A12-027
A1 Rev
R-01
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS. KEYPLAN:
2cm mortar and floor tiles sand fill 3cm screed 7cm thermal insulation W.P membrane
IN
IN OUT IN
OUT
DT01
17
29
24
1
8
15
ALL THE SPECIFICATIONS ARE COMPLIED WITH THE AUTHORITY'S STANDARDS
DETAIL AT ROOF THRESHOLD
2
DT02
TYPICAL TERRACE THRESHOLD
3
DT03
TYPICAL WINDOW THRESHOLD
4
DT04
WINDOW THRESHOLD
Description
Rev
Purpose of issue
Date
Checked
Authorized
Rev
Date
Authorized
Client:
Project Title:
OUT
IN
≥
SLOPE
16
4.45
17
5
23
80
Main Contractor:
Subconsultant/ Subcontractor:
5
DT05
WINDOW THRESHOLD
6
DT06
TERRACE RAILING DETAIL
1
DT01
DETAIL AT ROOF LAYERING
Drawing title:
WINDOWS CONSTRUCTION DETAILS
Designed by:
DINA HADDADIN
Original Scale
1:10
Drawn
Checked
MARAH ALABDALLAT
DINA HADDADIN
Date: AUGUST-2022
Date:
Project Number
123
SEP-2022
Authorised
Plot Size --
Date:
-
Sheet #
A12-028
A1 Rev
R-01
NOTES :-
1cm tiles as specified 3cm mortar 5cm screed topping
water level
Porcelain pool tiles
Porcelain Tiles Cement Plate
4mm torch applied water proofing membrane
3 layers water proofing membrane
Sealant by specialist
4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS.
5cm screed slope to drain
2%
40
30
WATER LEVEL
5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
15
15
2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER.
46°
4mm torch applied water proofing membrane 5cm screed slope to drain
Water proofing
1cm tiles as specified 3cm mortar 5cm screed topping
1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY.
RECESSED WALL LIGHT
15
Concrete angle fillet
KEYPLAN:
34
Waterproof gutter
Porcelain Tiles
Water Stop by specialists
Cement Plate 3 layers water proofing membrane Plaster Reinforced wall concrete wall
WATER PROOFING AS PER SPEC. 100mm THK. PCC (TYP.)
ALL THE SPECIFICATIONS ARE COMPLIED WITH THE AUTHORITY'S STANDARDS
200mm COMPACTED ROAD BASE 1000 GAUGE POLYTHENE SHEET COMPACTED SOIL (MIN.95%) M.D.D. (TYP.)
D1
BOTTOM OF POOL DETAIL SCALE 1:10
D2 2cm porcelain slab cement board
POOL STEPS AND OVERFLOW DETAIL
D3
SCALE 1:10
INFINITY POOL EDGE DETAIL SCALE 1:10
4x4 cm galv. steel structure laminate wood cladding
1cm tiles as specified 3cm mortar 5cm screed topping
GRASS & SOIL STAINLESS STEEL PLATE Reflective Pool
2cm porcelain tread mortar bed galv. steel angle to support tread Up-stand
4mm torch applied water proofing membrane
10
5cm screed slope to drain
special adhesive
VAR.
10
20
19mm thick hard wood floors wood sleepers selected gravel
5 8
90
Hidden Light
8
5
Date
Checked
Authorized
Rev
Date
Authorized
Porcelain riser Mortar
wood sleepers min 5*5 cm EVERY 60 cm
Hidden light
35
Water proofing
Description
Rev
D5
Porcelain pool tiles
TYPICAL STEPS DETAIL SCALE 1:10
Sealant by specialist
Purpose of issue Client: Slab on Grade 10CM Blinding 2 Layers 4mm Water Proofing Membrane
Black gravel
15CM Base Coursing
2 cm dark grey granite cladding
Compacted Soil (MIN.95%) M.D.D (TYP.)
Project Title:
D6
SCALE 1:10
SHALLOW WATER WITH GRASS CONNECTION SCALE 1:10
Portable steel tray Gas fireplace POOL
45
JACUZZI
(SCOPE OF WORK LIMIT)
ENTRY SCOPE OF WORK)
joint filler
Hidden light with diffuser
stone
100mm x 350mm precast concrete kerb (type 1)
SLOPE
3mm steel table
Main Contractor:
45
200x100x80 mm interlocking concrete block set as herringbone pattern & set on sand layer & granular sub-base 30mm thick sand bedding course 150mm thick granular MDD subbase cbr 60 at 98
SLOPE
gravel
180
stone
40
3mm steel table
30 hard wood floor
24
30
Subconsultant/ Subcontractor:
25
-0.95 f.fl plaster and paint steel table track compacted sub grade @ 95 standard 15mm thick mortar setting bed
foam concrete
40
D4
POOL BAR DETAIL
gas fireplace concrete foundation
non waven geotextile filteration layer 400 gr.m2 as per municipality specification & to the engineer approval.
Drawing title:
LANDSCAPE DETAILS
steel table track
Designed by:
DINA HADDADIN
Original Scale
D7
PARKING ENTRY, PARKING & CURB DETAIL SCALE 1:10
D8
FIRE PIT TABLE -SUNKEN LOUNGE SCALE 1:10
D9
FIRE PIT TABLE -POOL SCALE 1:10
Drawn
Checked
MARAH ALABDALLAT
DINA HADDADIN
Date: AUGUST-2022
Date:
1:10
Plot Size --
Date: Sheet #
Project Number
123
SEP-2022
Authorised
A12-029
-
A1 Rev
R-01
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER.
14
4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS.
20
26 35
OUT
30
IN
5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
30
85
KEYPLAN:
GRASS
60
30
15
15 55
5
10
70
ALL THE SPECIFICATIONS ARE COMPLIED WITH THE AUTHORITY'S STANDARDS
D1
WALL CONNECTION WITH OUTDOOR GRASS SCALE 1:10
D2
TYPICAL ROOF HANDRAIL
D3
SCALE 1:10
WALL DETAIL SCALE 1:10
Description
Rev
Date
Checked
Authorized
Rev
Date
Authorized
32
35
30
20
Purpose of issue Client:
WALL DETAIL
D5
SCALE 1:10
TYPICAL ROOF HANDRAIL
D6
SCALE 1:10
Project Title:
TERRACE RAILING DETAIL SCALE 1:10
5
D4
10 5 32
60
45
VARIES
10
Main Contractor:
GRASS
D9
CONNECTION AT WET AREAS
D11
SCALE 1:10
MAIN ENTRANCE CANOPY
15
SCALE 1:10
Subconsultant/ Subcontractor:
D1
Drawing title:
CONSTRUCTION DETAILS
F.F.L
Designed by:
2
D1
S.S.L
DINA HADDADIN
Original Scale
1:10 D7
WINDOW DETAIL SCALE 1:10
D8
TERRACE RAILING DETAIL SCALE 1:10
D10
SKIRTING WITH LED ALUMINUM PROFILE SCALE 1:10
Drawn
Checked
MARAH ALABDALLAT
DINA HADDADIN
Date: AUGUST-2022
Date:
Project Number
D12
WATER TANK FLOORING DETAILS SCALE 1:10
123
SEP-2022
Authorised
Plot Size --
Date:
-
Sheet #
A12-031
A1 Rev
R-01
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS.
50 9.2
31.6
9.2
5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS. KEYPLAN:
ALL THE SPECIFICATIONS ARE COMPLIED WITH THE AUTHORITY'S STANDARDS
TYPICAL ROOF DRAIN SCALE 1:5
D2
TYPICAL ROOF DRAIN
D5
SCALE 1:5
TYPICAL ROOF LAYERS AT INVERTED BEAMS SCALE 1:5
SLOPE
gravel
Description
Rev
Purpose of issue
Date
Checked
Authorized
Rev
Date
Authorized
Client:
Project Title:
D6
TYPICAL TERRACE LAYERS SCALE 1:5
D7
ROOF PLANTER DETAIL
D7
SCALE 1:5
TERRACE DETAIL SCALE 1:5
Main Contractor:
Subconsultant/ Subcontractor:
15
10
Drawing title:
ROOF TOP DETAILS
8
D1
Designed by:
DINA HADDADIN
Original Scale
1:5
D3
SHAFT COVER AT ROOF SCALE 1:5
D4
UPSTAND FOR FAN UNIT SCALE 1:5
Drawn
Checked
MARAH ALABDALLAT
DINA HADDADIN
Date: AUGUST-2022
Date:
Project Number
123
SEP-2022
Authorised
Plot Size --
Date:
-
Sheet #
A12-033
A1 Rev
R-01
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 20
10
4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS.
600
10
5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
60
VARIES
KEYPLAN:
100 N.T.S.
200 MIN
300
30
ALL THE SPECIFICATIONS ARE COMPLIED WITH THE AUTHORITY'S STANDARDS
TYPICAL BASEMENT TRENCH DETAIL SCALE 1:5
D3
SCALE 1:5
WATER TANK LINING - BASE SCALE 1:5
1 A12-35
120
30
3 A12-35
2 A12-35
Description
Rev
Date
Checked
Authorized
Rev
Date
Authorized
240
Y
X 5 2 A12-35
3
30
3 A12-35
Purpose of issue Client:
FOR X. AND Y. DIM REF. TO MECH. GRAWINGS D4
D5
RAMP GUTTER DETAIL
STONE RAIN WATER GUTTER DETAIL
Project Title:
SCALE 1:5
SCALE 1:5
Main Contractor:
Subconsultant/ Subcontractor:
30 15
D1
D2
BASEMENT WATERPROOF DETAIL
CONC. UP STAND
Drawing title:
BASEMENT DETAILS
Designed by:
DINA HADDADIN
Original Scale
1:5
D5
SECTION 1-1 SCALE 1:5
D5
SECTION 2-2 SCALE 1:5
D5
SECTION 3-3 SCALE 1:5
Drawn
Checked
MARAH ALABDALLAT
DINA HADDADIN
Date: AUGUST-2022
Date:
Project Number
123
SEP-2022
Authorised
Plot Size --
Date:
-
Sheet #
A12-035
A1 Rev
R-01
NOTES :-
10
30
1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY.
10
2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER.
5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
150 OR 200
4.2
4.9
4.9
4.2
1
4.9
2
4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS.
3 1.55
D1
DOOR FRAME DETAIL/ EXTERNAL WALL
D2
SCALE 1:5
2
100
45
15
5
DOOR FRAME DETAIL / PLASTERED WALL
D3
SCALE 1:5
TYPICAL STEEL DOOR JAMB
D4
SCALE 1:5
15
D5
TYPICAL LOUVER STEEL DOOR DETAIL
SCALE 1:5
ALL THE SPECIFICATIONS ARE COMPLIED WITH THE AUTHORITY'S STANDARDS
LEAF WIDTH
3.5
12
3.5
50
3.5
3.5
LEAF HEIGHT
50 VAR.
45
TYPICAL FLUSH STEEL DOOR DETAIL
SCALE 1:5
12
50
100
2
1
4.85
KEYPLAN:
D6
FIRE STEEL DOOR JAMB SCALE 1:5
D7
FIRE STEEL DOOR LEAF VERTICAL SECTION SCALE 1:5
D3
Description
Rev
Date
Checked
Authorized
Rev
Date
Authorized
TYPICAL STEEL DOOR JAMB SCALE 1:5
Purpose of issue Client:
Project Title:
Main Contractor:
Subconsultant/ Subcontractor:
D1
INTERIOR DOOR FRAME SCALE 1: 2.5
D2
INTERIOR DOOR FRAME SCALE 1: 2.5
D3
CONCEALED INTERIOR DOOR FRAME SCALE 1: 2.5
Drawing title:
DOOR DETAILS
Designed by:
DINA HADDADIN
Original Scale
AS SHOWN
Drawn
Checked
MARAH ALABDALLAT
DINA HADDADIN
Date: AUGUST-2022
Date:
Project Number
123
SEP-2022
Authorised
Plot Size --
Date:
-
Sheet #
A12-037
A1 Rev
R-01
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN MILLIMETER & LEVELS IN METER. UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENTS & EQUIPMENTS PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
²
² ²
² ²
² ²
PROPOSED
²
²
Description
Rev
Date
Checked
Authorised
Client:
1.
Mr. Mohamed FARUQE
2.
Project Title:
B+G+1+R VILLA Plot No. 123 - DUBAI HILLS
Contractor:
Consultant:
Architect
Katherine W. Lee
Reg. No.
104029
Structural Engineer
Ravikumar Arjun
Reg. No.
57650
Drawing title:
GENERAL NOTES Original Scale
Drawn
Checked RY
N.T.S
Date: JULY-2022
Authorised RK
Date: JULY-2022
Plot Size RY
Date: JULY-2022 Sheet #
Project Number
22 - 460
S-00
A1
Rev
0
NOTES :-
L OT
P
L
Fcu - 45 N/mm² Fy - 460 N/mm²
I MI T
P
L OT
T
L I MI
Contractor to Follow Concrete Specification According to Dubai Municipality Circular No. 225.
01
02 03
04
05
06 07 09
10 11
12
1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN MILLIMETER & LEVELS IN METER. UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS.
13
5. ALL SERVICES CUT-OUTS, EQUIPMENTS & EQUIPMENTS PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
- CONTINUOUS COLUMN - TERMINATED COLUMN - PLANTED COLUMN - RCC BASEMENT WALL
A1
A B C2A
A2 C2
C
C5A
C1
C5
C5A
C9
A3
PROPOSED D
A4 C4
C8
C2
C8
A5
W1
E
C5
C2
C1
F Description
Rev
Date
Checked
Authorised
Client:
C1
G
Mr. Mohamed FARUQE
A6
C2
H C1
Project Title:
C2
J
B+G+1+R VILLA Plot No. 123 - DUBAI HILLS
C6 C3
C3
K
C1 Contractor:
C5
A7
C7 W2
Consultant:
C2
L W3
08
Katherine W. Lee
Reg. No.
104029
Structural Engineer
Ravikumar Arjun
Reg. No.
57650
P
T
Architect
BASEMENT COLUMN LAYOUT
L I
MI
L OT
Drawing title:
MI
P
T
L I
Original Scale
1
BASEMENT COLUMN LAYOUT (Basement To Ground Floor)
SCALE 1:75
Drawn
Checked RY
1:75
TYPICAL PROTECTION DETAILS OF COLUMNS INSIDE WATER TANK
Date: JULY-2022
Authorised RK
Date: JULY-2022
Plot Size RY
Date: JULY-2022 Sheet #
Project Number
22 - 460
S-01
A1
Rev
0
L OT
NOTES :-
Fcu - 45 N/mm² Fy - 460 N/mm² Contractor to Follow Concrete Specification According to Dubai Municipality Circular No. 225.
01
02 03
04
05
06 07 09
10 11
12
13
1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN MILLIMETER & LEVELS IN METER. UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENTS & EQUIPMENTS PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
- CONTINUOUS COLUMN - TERMINATED COLUMN - PLANTED COLUMN - RCC BASEMENT WALL
A1
A
PC3
B C2A
A2 C2
C
C5A
PC2
C1
C5
A3
PC1
D
PROPOSED
A4 C4
A5
W1
E
C5
C2
C1
F
C1
G
Description
Rev
A6
C2
Date
Checked
Authorised
Client:
H Mr. Mohamed FARUQE C1 C2
J
C6 C3
C3
K
Project Title:
B+G+1+R VILLA Plot No. 123 - DUBAI HILLS
C1 C5
A7 Contractor:
C7 W2
C2
L Consultant:
W3
08 Architect
Katherine W. Lee
Reg. No.
104029
Structural Engineer
Ravikumar Arjun
Reg. No.
57650
Drawing title:
GROUND FLOOR COLUMN LAYOUT
2
GROUND FLOOR COLUMN LAYOUT (Ground Floor to First Floor)
SCALE 1:75
Original Scale
Drawn
Checked RY
1:75
Date: JULY-2022
Authorised RK
Date: JULY-2022
Plot Size RY
Date: JULY-2022 Sheet #
Project Number
22 - 460
S-02
A1
Rev
0
NOTES :-
Fcu - 45 N/mm² Fy - 460 N/mm²
01
02 03
04
05
06 07 09
10 11
12
Contractor to Follow Concrete Specification According to Dubai Municipality Circular No. 225.
13
1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN MILLIMETER & LEVELS IN METER. UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENTS & EQUIPMENTS PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
- CONTINUOUS COLUMN - TERMINATED COLUMN - PLANTED COLUMN - RCC BASEMENT WALL A1
A B C2A
A2 C2
C
C5A
PC2
C1
C5
A3
PC1
D
A4
PROPOSED
C4
A5
W1
E
C5
C1
F
C1
G
A6
C2
Description
Rev
H
Date
Checked
Authorised
Client:
Mr. Mohamed FARUQE
C1
J
C6 Project Title:
C3
K
C1
B+G+1+R VILLA Plot No. 123 - DUBAI HILLS
C5 PC4
A7 Contractor:
C7 W2
L W3
Consultant:
08
3
FIRST FLOOR COLUMN LAYOUT (First Floor to Roof)
Architect
Katherine W. Lee
Reg. No.
104029
Structural Engineer
Ravikumar Arjun
Reg. No.
57650
Drawing title:
FIRST FLOOR COLUMN LAYOUT
SCALE 1:75 Original Scale
Drawn
Checked RY
1:75
Date: JULY-2022
Authorised RK
Date: JULY-2022
Plot Size RY
Date: JULY-2022 Sheet #
Project Number
22 - 460
S-03
A1
Rev
0
NOTES :-
Fcu - 45 N/mm² Fy - 460 N/mm² Contractor to Follow Concrete Specification According to Dubai Municipality Circular No. 225.
01
02 03
04
05
06 07 09
10 11
12
1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN MILLIMETER & LEVELS IN METER. UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS.
13
5. ALL SERVICES CUT-OUTS, EQUIPMENTS & EQUIPMENTS PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
- CONTINUOUS COLUMN - TERMINATED COLUMN - PLANTED COLUMN - RCC BASEMENT WALL
A1
A B
A2
C
A3
D
PROPOSED
A4
A5
E W1
F PC5 PC5 Description
Rev
G
Date
Checked
Authorised
Client:
A6
H
Mr. Mohamed FARUQE
J
Project Title:
PC5 PC5
B+G+1+R VILLA Plot No. 123 - DUBAI HILLS
K A7
L
Contractor:
Consultant:
08
4
ROOF COLUMN LAYOUT (Roof to Top Roof)
SCALE
Architect
Katherine W. Lee
Reg. No.
104029
Structural Engineer
Ravikumar Arjun
Reg. No.
57650
Drawing title:
ROOF COLUMN LAYOUT
1:75 Original Scale
Drawn
Checked RY
1:75
Date: JULY-2022
Authorised RK
Date: JULY-2022
Plot Size RY
Date: JULY-2022 Sheet #
Project Number
22 - 460
S-04
A1
Rev
0
NOTES :-
Fcu - 45 N/mm² Fy - 460 N/mm²
1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS.
Contractor to Follow Concrete Specification According to Dubai Municipality Circular No. 225.
1ST FLOOR TO ROOF
3. ALL DIMENSIONS ARE IN MILLIMETER & LEVELS IN METER. UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENTS & EQUIPMENTS PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
MAINE REINFORCEMENT
LINK
MAINE REINFORCEMENT
LINK
MAINE REINFORCEMENT
LINK
MAINE REINFORCEMENT
LINK
MAINE REINFORCEMENT
LINK
MAINE REINFORCEMENT
LINK
MAINE REINFORCEMENT
LINK
MAINE REINFORCEMENT
LINK
MAINE REINFORCEMENT
LINK
16-Y16
2-Closed Link+3-Hook Y10@150c/c
14-Y16
3-Closed Link Y10@150c/c
14-Y20
3-Closed Link Y10@150c/c
16-Y25
2-Closed Link+2-Hook Y10@150c/c
18-Y16
4-Closed Link Y10@150c/c
13-Y16
1-Closed Link Y10@150c/c
13-Y25
1-Closed Link Y10@150c/c
14-Y25
3-Closed Link+1-Hook Y10@150c/c
20-Y16
4-Closed Link+1-Hook Y10@150c/c
MAINE REINFORCEMENT
LINK
MAINE REINFORCEMENT
LINK
MAINE REINFORCEMENT
LINK
MAINE REINFORCEMENT
LINK
MAINE REINFORCEMENT
LINK
MAINE REINFORCEMENT
LINK
MAINE REINFORCEMENT
LINK
MAINE REINFORCEMENT
LINK
MAINE REINFORCEMENT
LINK
16-Y16
2-Closed Link+3-Hook Y10@150c/c
14-Y16
3-Closed Link Y10@150c/c
14-Y20
3-Closed Link Y10@150c/c
16-Y25
2-Closed Link+2-Hook Y10@150c/c
18-Y16
4-Closed Link Y10@150c/c
13-Y16
1-Closed Link Y10@150c/c
13-Y25
1-Closed Link Y10@150c/c
14-Y25
3-Closed Link+1-Hook Y10@150c/c
20-Y16
4-Closed Link+1-Hook Y10@150c/c
MAINE REINFORCEMENT
LINK
MAINE REINFORCEMENT
LINK
MAINE REINFORCEMENT
LINK
MAINE REINFORCEMENT
LINK
MAINE REINFORCEMENT
LINK
MAINE REINFORCEMENT
LINK
MAINE REINFORCEMENT
LINK
MAINE REINFORCEMENT
LINK
MAINE REINFORCEMENT
LINK
MAINE REINFORCEMENT
LINK
MAINE REINFORCEMENT
LINK
16-Y16
2-Closed Link+3-Hook Y10@150c/c
14-Y16
3-Closed Link Y10@150c/c
14-Y20
3-Closed Link Y10@150c/c
16-Y25
2-Closed Link+2-Hook Y10@150c/c
18-Y16
4-Closed Link Y10@150c/c
13-Y16
1-Closed Link Y10@150c/c
13-Y25
1-Closed Link Y10@150c/c
14-Y25
3-Closed Link+1-Hook Y10@150c/c
20-Y16
4-Closed Link+1-Hook Y10@150c/c
14-Y25
3-Closed Link+1-Hook Y10@150c/c
18-Y25
4-Closed Link Y10@150c/c
GROUND FLOOR TO 1ST FLOOR
BASEMENT TO GROUND FLOOR
COLUMN REF.
C1
C2
C2A
C3
C4
C5
C5A
C6
C7
C8
C9
ROOF TO TOP ROOF
---
1ST FLOOR TO ROOF
PROPOSED
MAINE REINFORCEMENT
LINK
MAINE REINFORCEMENT
LINK
MAINE REINFORCEMENT
LINK
MAINE REINFORCEMENT
LINK
14-Y20
3-Closed Link Y10@150c/c
13-Y20
1-Closed Link Y10@150c/c
16-Y20
3-Closed Link Y10@150c/c
10-Y16
2-Closed Link Y10@150c/c
---
GROUND FLOOR TO 1ST FLOOR
BASEMENT TO GROUND FLOOR
COLUMN REF.
MAINE REINFORCEMENT
LINK
MAINE REINFORCEMENT
LINK
MAINE REINFORCEMENT
LINK
14-Y20
3-Closed Link Y10@150c/c
13-Y20
1-Closed Link Y10@150c/c
14-Y20
3-Closed Link Y10@150c/c
--Description
Rev
---
---
---
---
---
PC1
PC2
PC3
PC4
PC5
Date
Checked
Authorised
Client:
Mr. Mohamed FARUQE
Project Title:
B+G+1+R VILLA Plot No. 123 - DUBAI HILLS
ROOF TO TOP ROOF
Contractor: MAINE REINFORCEMENT
LINK
VERTICAL Y16@150
1-Closed Link + Hooks@300c/c - Y10@150c/c
RCC BASEMENT WALL
1ST FLOOR TO ROOF
RCC WATER TANK WALL
Consultant: MAINE REINFORCEMENT
LINK
MAINE REINFORCEMENT
LINK
MAINE REINFORCEMENT
LINK
VERTICAL Y16@150
1-Closed Link + Hooks@300c/c - Y10@150c/c
34-Y16
1-Closed Link+ 7-Hooks Y10@150c/c
26-Y16
1-Closed Link+ 5-Hooks Y10@150c/c
MAINE REINFORCEMENT
LINK
MAINE REINFORCEMENT
LINK
MAINE REINFORCEMENT
LINK
VERTICAL Y16@150
1-Closed Link + Hooks@300c/c - Y10@150c/c
32-Y16
1-Closed Link+ 7-Hooks Y10@150c/c
26-Y16
1-Closed Link+ 5-Hooks Y10@150c/c
GROUND FLOOR TO 1ST FLOOR
Architect
Katherine W. Lee
Reg. No.
104029
Structural Engineer
Ravikumar Arjun
Reg. No.
57650
Drawing title: BASEMENT TO GROUND FLOOR
COLUMN REF.
COLUMNS AND WALLS SCHEDULE MAINE REINFORCEMENT
LINK
MAINE REINFORCEMENT
LINK
MAINE REINFORCEMENT
LINK
VERTICAL Y16@150
1-Closed Link + Hooks@300c/c - Y10@150c/c
32-Y16
1-Closed Link+ 7-Hooks Y10@150c/c
26-Y16
1-Closed Link+ 5-Hooks Y10@150c/c
W1
W2
W3
Original Scale
TYPICAL PLAN DETAIL WALL CORNER
TYPICAL PLAN DETAIL AT WALL INTERSECTIONS
Drawn
Checked RY
1:25/20
Date: JULY-2022
Authorised RK
Date: JULY-2022
Plot Size RY
Date: JULY-2022 Sheet #
Project Number
22 - 460
S-05
A1
Rev
0
NOTES :-
12 11
10
Fcu - 45 N/mm² Fy - 460 N/mm²
12 10
11
Contractor to Follow Concrete Specification According to Dubai Municipality Circular No. 225.
1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN MILLIMETER & LEVELS IN METER. UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENTS & EQUIPMENTS PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
A3
A3
13-Y20
13-Y20
Y12@150c/c
Y12@150c/c
A4
A4 10-Y20
10-Y20
Y12@150c/c
Y12@150c/c
LIFT CORE WALL
LIFT CORE WALL
(BESETMENT TO GROUND FLOOR ) SCALE 1:25
(GROUND FLOOR TO FIRST FLOOR ) SCALE 1:25
12
12
11
10
PROPOSED
10
11 Description
Rev
Date
Checked
Authorised
Client:
Mr. Mohamed FARUQE
A3
A3 Project Title:
B+G+1+R VILLA Plot No. 123 - DUBAI HILLS
13-Y20
TYPICAL PLAN DETAIL WALL CORNER
Y12@150c/c
A4
Contractor:
A4 Consultant:
10-Y20 Y12@150c/c
10-Y20 Y12@150c/c
Architect
Katherine W. Lee
Reg. No.
104029
Structural Engineer
Ravikumar Arjun
Reg. No.
57650
Drawing title:
LIFT CORE WALL DETAILS
LIFT CORE WALL (FIRST FLOOR TO ROOF) SCALE 1:25
LIFT CORE WALL (ROOF TO TOP ROOF) SCALE 1:25
Original Scale
TYPICAL PLAN DETAIL AT WALL INTERSECTIONS
Drawn
Checked RY
1:25
Date: JULY-2022
Authorised RK
Date: JULY-2022
Plot Size RY
Date: JULY-2022 Sheet #
Project Number
22 - 460
S-06
A1
Rev
0
NOTES :-
Fcu - 45 N/mm² Fy - 460 N/mm² Contractor to Follow Concrete Specification According to Dubai Municipality Circular No. 225.
1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN MILLIMETER & LEVELS IN METER. UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENTS & EQUIPMENTS PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
PROPOSED
Sc: NTS
Sc: NTS Description
Rev
Date
Checked
Authorised
Client:
Mr. Mohamed FARUQE
DET @ SPANDREL DOOR Sc: NTS
DET@ WINDOW IN CORE WALL
Project Title:
B+G+1+R VILLA Plot No. 123 - DUBAI HILLS
Contractor:
Consultant:
Architect
Katherine W. Lee
Reg. No.
104029
Structural Engineer
Ravikumar Arjun
Reg. No.
57650
Drawing title:
TYPICAL CORE WALL OPENING DETAILS Original Scale
Drawn
Checked RY
N.T.S
Date: JULY-2022
Authorised RK
Date: JULY-2022
Plot Size RY
Date: JULY-2022 Sheet #
Project Number
22 - 460
S-07
A1
Rev
0
NOTES :-
L
P
L OT
Fcu - 45 N/mm² Fy - 460 N/mm²
I MI T
P
L OT
T
L I MI
Contractor to Follow Concrete Specification According to Dubai Municipality Circular No. 225.
01
02 03
04
05
06 07 09
10 11
12
1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN MILLIMETER & LEVELS IN METER. UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS.
13
5. ALL SERVICES CUT-OUTS, EQUIPMENTS & EQUIPMENTS PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
- CONTINUOUS COLUMN - TERMINATED COLUMN C
S-15
- PLANTED COLUMN
S-
C 15
- RCC BASEMENT WALL
A1
CATCH BASIN
A B
²
A2
C ² UP STAND 100mm
UP STAND 100mm
RAFT T=400mm
D
S-15
CATCH BASIN
S-15
E
A3 TOP MESH Y16@150c/c BOTTOM MESH Y16@150c/c
PROPOSED
D
A4
SPACE FOR GULLY& SAND TRAP
A5
E
DROP
150mm
F SUMP PIT
1
S-11
Description
Rev
Date
Checked
Authorised
Client:
G
A6
Mr. Mohamed FARUQE
H UP STAND 100mm Project Title:
00mm AND 1 UP ST
J
B+G+1+R VILLA Plot No. 123 - DUBAI HILLS
K
Contractor:
C
S-15
A7
Consultant:
L
A
S-15
08
Katherine W. Lee
Reg. No.
104029
Structural Engineer
Ravikumar Arjun
Reg. No.
57650
P
T
Architect
L I
MI
L OT
Drawing title:
L I
MI
P
T
RAFT FOUNDATION LAYOUT Original Scale
Drawn
Checked RY
5
RAFT FOUNDATION LAYOUT SCALE
1:75
1:75
Date: JULY-2022
Authorised RK
Date: JULY-2022
Plot Size RY
Date: JULY-2022 Sheet #
Project Number
22 - 460
S-08
A1
Rev
0
L OT
L OT
NOTES :-
P
L I MI T
Fcu - 45 N/mm² Fy - 460 N/mm²
P
L OT
T
L I MI
Contractor to Follow Concrete Specification According to Dubai Municipality Circular No. 225.
01
02 03
04
05
06 07 09
10 11
12
1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN MILLIMETER & LEVELS IN METER. UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS.
13
5. ALL SERVICES CUT-OUTS, EQUIPMENTS & EQUIPMENTS PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
- CONTINUOUS COLUMN 3972
- PLANTED COLUMN
L=3000
H
- TERMINATED COLUMN
- RCC BASEMENT WALL
B
L=3000
3000
A1
A B 3000
E
5200
D
A2 3000
4000
A
L=3000
B
C
L=3000
L=3000
3000
L=3000
A
C
L=3000
L=3000
H
4000
D
L=4000
L=3000
UP STAND 100mm
UP STAND 100mm
3000
RAFT T=400mm L=3000
BOTTOM MESH Y16@150c/c
A3
L=4000
G
B
PROPOSED
L=3000
5550
L=3000
D
3000
B
8700
A4
4000
F
B
3000
150mm
L=3000
L=3000
DROP
L=2500
F
A5
5550
4000
E
4000
E
0
G
L=2500
B
6500
L=700
RAFT mm T=550
L=4000
B
B
Description
Rev
Date
Checked
Authorised
3000
L=4000
C
F
0
L=3000
L=300
C
H
B L=300
0
Project Title:
L=3000
L=3000
E
B+G+1+R VILLA Plot No. 123 - DUBAI HILLS
L=4000
2500
3500
3000
K
Mr. Mohamed FARUQE
B L=3000
00mm AND 1 UP ST
F
D
L=3000
J
A6
L=4000
H
4000
A
L=3000
B
3300
B
UP STAND 100mm L=2500
L=3000
Client:
3000
G
C A
C 3000
L=3000
Contractor:
A7
L=3000
4000
L=3000
B
3000
5000
L=3000
E
Consultant:
L
Architect
Katherine W. Lee
Reg. No.
104029
P
Structural Engineer
Ravikumar Arjun
Reg. No.
57650
L OT
Drawing title:
08
L I
MI
T
L I
MI
P
T
RAFT EXTRA BOTTOM REINFORCEMENT LAYOUT Original Scale
Drawn
Checked RY
5
RAFT EXTRA BOTTOM REINFORCEMENT LAYOUT SCALE
1:75
1:75
Date: JULY-2022
Authorised RK
Date: JULY-2022
Plot Size RY
Date: JULY-2022 Sheet #
Project Number
22 - 460
S-09
A1
Rev
0
L OT
NOTES :-
L
P
L OT I MI
L OT
T
L I MI
Fcu - 45 N/mm² Fy - 460 N/mm²
P
T
Contractor to Follow Concrete Specification According to Dubai Municipality Circular No. 225.
01
02 03
04
05
06 07 09
10 11
12
1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN MILLIMETER & LEVELS IN METER. UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS.
13
5. ALL SERVICES CUT-OUTS, EQUIPMENTS & EQUIPMENTS PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
- CONTINUOUS COLUMN - TERMINATED COLUMN - PLANTED COLUMN - RCC BASEMENT WALL
A1
A B
A2
C UP STAND 100mm
RAFT T=400mm
UP STAND 100mm
A3
L=4000
G
L=300
0
D
TOP MESH Y16@150c/c
m P 150m DRO 800
PROPOSED
3
D
A4
3000 4390
C
L=3000
0 L=300
RAFT mm T=550
A 0 L=300
L=3000
E
6300
E
A5
4300
E B
B
3023
F
0 L=450
0 L=700
Description
Rev
Date
Checked
Authorised
3000
Client:
A6
3000
3000
D 6500
L=3000
Project Title:
H L=3000
0
0mm ND 10
3000
K
E
A UP ST
L=300
B
UP STAND 100mm
J
Mr. Mohamed FARUQE
D L=4000
L=4000
B
H
L=3000
G
B+G+1+R VILLA Plot No. 123 - DUBAI HILLS
8000
Contractor:
L=3000
A7 L=3000
J
F 3000
E L=3000
F
3000
L=4000
Consultant:
L
Architect
Katherine W. Lee
Reg. No.
104029
P
Structural Engineer
Ravikumar Arjun
Reg. No.
57650
L OT
Drawing title:
08
L I
MI
T
L I
MI
P
T
RAFT EXTRA TOP REINFORCEMENT LAYOUT Original Scale
Drawn
Checked RY
1:75
5
RAFT EXTRA TOP REINFORCEMENT LAYOUT SCALE
1:75
Date: JULY-2022
Authorised RK
Date: JULY-2022
Plot Size RY
Date: JULY-2022 Sheet #
Project Number
22 - 460
S-10
A1
Rev
0
L OT
NOTES :-
Fcu - 45 N/mm² Fy - 460 N/mm² Contractor to Follow Concrete Specification According to Dubai Municipality Circular No. 225.
1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN MILLIMETER & LEVELS IN METER. UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS.
LIFT PIT
5. ALL SERVICES CUT-OUTS, EQUIPMENTS & EQUIPMENTS PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
50mm THICK SCREED 2-LAYER 4mm SBS MEMBRANE 100mm THK. PCC (TYP.) 1000 GAUGE POLYTHENE SHEET COMPACTED SOIL (MIN.95%) M.D.D. (TYP.)
50mm THICK SCREED 2-LAYER 4mm SBS MEMBRANE 100mm THK. PCC (TYP.) 1000 GAUGE POLYTHENE SHEET COMPACTED SOIL (MIN.95%) M.D.D. (TYP.)
TYPICAL RAFT DETAILS SCALE 1:20
50mm THICK SCREED 2-LAYER 4mm SBS MEMBRANE 100mm THK. PCC (TYP.) 1000 GAUGE POLYTHENE SHEET COMPACTED SOIL (MIN.95%) M.D.D. (TYP.)
LIFT PIT SECTION 1 - 1 SCALE 1:20
PROPOSED 50mm THICK SCREED 2-LAYER 4mm SBS MEMBRANE 100mm THK. PCC (TYP.) 1000 GAUGE POLYTHENE SHEET COMPACTED SOIL (MIN.95%) M.D.D. (TYP.)
CATCH BASIN DETAILS SCALE 1:20 50mm THICK SCREED
Rev
2-LAYER 4mm SBS MEMBRANE
Client:
Description
Date
Checked
Authorised
100mm THK. PCC (TYP.)
UPSTAND SECTION SCALE 1:20
Mr. Mohamed FARUQE
1000 GAUGE POLYTHENE SHEET COMPACTED SOIL (MIN.95%) M.D.D. (TYP.) Project Title:
B+G+1+R VILLA Plot No. 123 - DUBAI HILLS
Contractor:
SUMP PIT
SPACE FOR GULLY& SAND TRAP
Consultant:
50mm THICK SCREED 2-LAYER 4mm SBS MEMBRANE 100mm THK. PCC (TYP.) 1000 GAUGE POLYTHENE SHEET COMPACTED SOIL (MIN.95%) M.D.D. (TYP.)
Architect
Katherine W. Lee
Reg. No.
104029
Structural Engineer
Ravikumar Arjun
Reg. No.
57650
Drawing title:
RAFT FOUNDATION SECTIONS DETAILS
TYPICAL DETAILS SUMP PIT,SPACE FOR GULLY& SAND TRAP SCALE 1:20
Original Scale
Drawn
Checked RY
1:75
Date: JULY-2022
Authorised RK
Date: JULY-2022
Plot Size RY
Date: JULY-2022 Sheet #
Project Number
22 - 460
S-11
A1
Rev
0
NOTES :-
L
P
L OT
Fcu - 45 N/mm² Fy - 460 N/mm²
I MI T
P
L OT
T
L I MI
Contractor to Follow Concrete Specification According to Dubai Municipality Circular No. 225.
01
02 03
04
05
06 07 09
10 11
12
1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN MILLIMETER & LEVELS IN METER. UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS.
13
5. ALL SERVICES CUT-OUTS, EQUIPMENTS & EQUIPMENTS PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS. SCHEDULE OF GROUND FLOOR BEAMS
UP-STAND 400mm TYPE
BOTTOM REINFORCEMENT
SIZE BxD (mm)
TOP REINFORCEMENT
ALL THROUGH
EXTRA BAR AT MID SPAN
ALL THROUGH
EXTRA BARS CONTINUOUS SUPPORT
- CONTINUOUS COLUMN
STIRRUPS SIDE BARS
EXTRA BARS (EACH FACE) END SUPPORT
REMARKS NEAR SUPP.L/4
NOMINAL
- TERMINATED COLUMN
E
S-15
A
S-15
S-1
E5
B1
250 x 600
3-Y20
2-Y20
2-Y20
2-Y20
2-Y20
---
2-Y10@150 c/c
2-Y10@150 c/c
-
B2
250 x 700
4-Y20
2-Y20
2-Y20
2-Y20
--
---
2-Y10@150 c/c
2-Y10@150 c/c
-
B3
250 x 700
3-Y20
2-Y20
2-Y20
2-Y20
2-Y20
---
2-Y10@150 c/c
2-Y10@150 c/c
-
TRB1
500 x 1000
4-Y25+4-Y25
3-Y25
4-Y20+4-Y20
---
3-Y20
3-Y20
4L-Y12@150 c/c 4L-Y12@150 c/c TRANSFER BEAM
TRB2
450 x 1000
4-Y25+2-Y25
2-Y25
4-Y20
---
3-Y20
3-Y16
4L-Y12@150 c/c 4L-Y12@150 c/c TRANSFER BEAM
TRB3
750 x 1000
4-Y25+4-Y25
2-Y25
4-Y20+2-Y20
---
3-Y20
3-Y20
4L-Y12@150 c/c 4L-Y12@150 c/c TRANSFER BEAM
- PLANTED COLUMN - RCC BASEMENT WALL
A1
A UP-STAND 600mm
TOP MESH Y12@150c/c BOTTOM MESH Y12@150c/c
UP-STAND 600mm
T=300mm
B
A2
C
T=300mm
D
S-15
C
TOP MESH Y12@150c/c BOTTOM MESH Y12@150c/c
S-15
UP-STAND 600mm
A3
PROPOSED D
A4
A5 F S-15
E T=300mm
F
Description
Rev
TOP MESH Y12@150c/c BOTTOM MESH Y12@150c/c
Checked
Authorised
Client:
4-Y16 TOP&BOTTOM
G
Date
A6
Mr. Mohamed FARUQE
H Project Title:
J
B+G+1+R VILLA Plot No. 123 - DUBAI HILLS
4-Y16 TOP&BOTTOM
G S-15
K 00mm AND 4
E
S-15
T=300mm
TOP MESH Y12@150c/c BOTTOM MESH Y12@150c/c
A7
UP-ST
SLAB ON GRADE T=250mm
Contractor:
TOP MESH Y12@150c/c BOTTOM MESH Y12@150c/c
Consultant:
B'
S-15
B
S-15
UP-STAND 400mm
L
UP-STAND 400mm
08
Katherine W. Lee
Reg. No.
104029
Structural Engineer
Ravikumar Arjun
Reg. No.
57650
P
T
Architect
L I
MI
L OT
Drawing title:
L I
MI
P
T
GROUND SLAB/TIE BEAM LAYOUT Original Scale
Drawn
Checked RY
1:75
6
GROUND SLAB/TIE BEAM LAYOUT SCALE
1:75
Date: JULY-2022
Authorised RK
Date: JULY-2022
Plot Size RY
Date: JULY-2022 Sheet #
Project Number
22 - 460
S-12
A1
Rev
0
L OT
L
P
L OT
NOTES :-
I MI T
Fcu - 45 N/mm² Fy - 460 N/mm²
PL
OT
T
L I MI
Contractor to Follow Concrete Specification According to Dubai Municipality Circular No. 225.
01
02 03
04
05
06 07 09
10 11
12
1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN MILLIMETER & LEVELS IN METER. UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS.
13
5. ALL SERVICES CUT-OUTS, EQUIPMENTS & EQUIPMENTS PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
- CONTINUOUS COLUMN - TERMINATED COLUMN - PLANTED COLUMN - RCC BASEMENT WALL
A1
A T=300mm
B
BOTTOM MESH Y12@150c/c
3000
C
A2
L=3000
A T=300mm
A3
BOTTOM MESH Y12@150c/c
PROPOSED D
A4
A L=200
A
0
3000
L=2000
4300
A5
E T=300mm
F
BOTTOM MESH Y12@150c/c
Description
Rev
Date
Checked
Authorised
Client:
G 3000
H
A6
Mr. Mohamed FARUQE
A 0
L=300
Project Title:
J
B+G+1+R VILLA Plot No. 123 - DUBAI HILLS
K Contractor:
A7
SLAB ON GRADE T=250mm T=300mm
BOTTOM MESH Y12@150c/c
TOP MESH Y12@150c/c BOTTOM MESH Y12@150c/c
Consultant:
L
Katherine W. Lee
Reg. No.
104029
Structural Engineer
Ravikumar Arjun
Reg. No.
57650
L OT
Drawing title:
08
L I
MI
T
Architect
P
UP-STAND 600mm
L I
MI
P
T
GROUND SLAB EXTRA BOTTOM REINFORCEMENT LAYOUT Original Scale
Drawn
Checked RY
6
GROUND SLAB EXTRA BOTTOM REINFORCEMENT LAYOUT SCALE
1:75
1:75
Date: JULY-2022
Authorised RK
Date: JULY-2022
Plot Size RY
Date: JULY-2022 Sheet #
Project Number
22 - 460
S-13
A1
Rev
0
L OT
NOTES :-
01
02 03
04
05
06 07 09
10 11
12
Fcu - 45 N/mm² Fy - 460 N/mm²
13
Contractor to Follow Concrete Specification According to Dubai Municipality Circular No. 225.
1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN MILLIMETER & LEVELS IN METER. UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENTS & EQUIPMENTS PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
A1
A B
A2
C
A3
D
A4
PROPOSED
A5
E F
T=200mm
TOP MESH Y12@150c/c BOTTOM MESH Y12@150c/c
G
A6
H Description
Rev
Date
Checked
Authorised
Client:
J
Mr. Mohamed FARUQE
K
Project Title:
A7
B+G+1+R VILLA Plot No. 123 - DUBAI HILLS
Contractor:
L
Consultant:
SECTION A - A
08
SCALE 1:20
8
TOP ROOF SLAB LAYOUT SCALE
SCHEDULE OF FIRST FLOOR BEAMS
1:75 TYPE
B1
SIZE BxD (mm)
250 x 500
BOTTOM REINFORCEMENT
TOP REINFORCEMENT
ALL THROUGH
EXTRA BAR AT MID SPAN
ALL THROUGH
EXTRA BARS CONTINUOUS SUPPORT
2-Y20
--
2-Y16
--
STIRRUPS
SIDE BARS EXTRA BARS (EACH FACE) END SUPPORT 2-Y16
REMARKS NEAR SUPP.L/4
NOMINAL
--
2-Y10@150 c/c
2-Y10@150 c/c
-
--
2-Y10@150 c/c
2-Y10@150 c/c
-
Architect
Katherine W. Lee
Reg. No.
104029
Structural Engineer
Ravikumar Arjun
Reg. No.
57650
Drawing title:
TOP ROOF SLAB LAYOUT & DETAILS Original Scale
B2
200 x 500
2-Y20
--
2-Y16
--
2-Y16
200 x 500
2-Y16
--
2-Y20
2-Y20
--
--
2-Y10@150 c/c
2-Y10@150 c/c
Checked RY
1:75
CB1
Drawn
-
Date: JULY-2022
Authorised RK
Date: JULY-2022
Plot Size RY
Date: JULY-2022 Sheet #
Project Number
22 - 460
S-24
A1
Rev
0
NOTES :-
Fcu - 45 N/mm² Fy - 460 N/mm² Contractor to Follow Concrete Specification According to Dubai Municipality Circular No. 225.
1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN MILLIMETER & LEVELS IN METER. UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENTS & EQUIPMENTS PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
SECTION A - A SCALE 1:25
WATER TANK
SECTION G - G SCALE 1:25
PROPOSED
SECTION F - F SCALE 1:25
SECTION B - B SCALE 1:25
50mm THICK SCREED
50mm THICK SCREED
2-LAYER 4mm SBS MEMBRANE
2-LAYER 4mm SBS MEMBRANE
100mm THK. PCC (TYP.)
100mm THK. PCC (TYP.)
SECTION B' - B'
1000 GAUGE POLYTHENE SHEET
SCALE 1:25
COMPACTED SOIL (MIN.95%) M.D.D. (TYP.)
Description
Rev
1000 GAUGE POLYTHENE SHEET COMPACTED SOIL (MIN.95%) M.D.D. (TYP.)
Date
Checked
Authorised
Client:
Mr. Mohamed FARUQE
Project Title:
B+G+1+R VILLA Plot No. 123 - DUBAI HILLS
Contractor:
Consultant:
Architect
Katherine W. Lee
Reg. No.
104029
Structural Engineer
Ravikumar Arjun
Reg. No.
57650
Drawing title:
RAFT AND GROUND SLAB SECTIONS DETAILS 50mm THICK SCREED 50mm THICK SCREED 2-LAYER 4mm SBS MEMBRANE 100mm THK. PCC (TYP.)
SECTION C - C SCALE 1:25
1000 GAUGE POLYTHENE SHEET COMPACTED SOIL (MIN.95%) M.D.D. (TYP.)
50mm THICK SCREED
2-LAYER 4mm SBS MEMBRANE
1:75
100mm THK. PCC (TYP.)
1000 GAUGE POLYTHENE SHEET
SECTION D - D SCALE 1:25
1000 GAUGE POLYTHENE SHEET COMPACTED SOIL (MIN.95%) M.D.D. (TYP.)
Drawn
Checked RY
2-LAYER 4mm SBS MEMBRANE
100mm THK. PCC (TYP.)
COMPACTED SOIL (MIN.95%) M.D.D. (TYP.)
Original Scale
SECTION E - E SCALE 1:25
Date: JULY-2022
Authorised RK
Date: JULY-2022
Plot Size RY
Date: JULY-2022 Sheet #
Project Number
22 - 460
S-15
A1
Rev
0
NOTES :-
Fcu - 45 N/mm² Fy - 460 N/mm²
01
02 03
04
05
06 07 09
10 11
12
Contractor to Follow Concrete Specification According to Dubai Municipality Circular No. 225.
13
1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN MILLIMETER & LEVELS IN METER. UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENTS & EQUIPMENTS PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
- CONTINUOUS COLUMN - TERMINATED COLUMN - PLANTED COLUMN - RCC BASEMENT WALL A1
A B
A2
4-Y16 TOP&BOTTOM 4-Y16 TOP&BOTTOM
C 4-Y16 TOP&BOTTOM
B
S-19
A3 T=300mm
D
4-Y16 TOP&BOTTOM
A4
TOP MESH Y12@150c/c BOTTOM MESH Y12@150c/c
1
S-15
PROPOSED
C
A5
S-19 4-Y16 TOP&BOTTOM
4-Y16 TOP&BOTTOM
E F
3-Y16 TOP&BOTTOM
T=300mm 4-Y16 TOP&BOTTOM 4-Y16 OTTOM TOP&B
A
TOP MESH Y12@150c/c BOTTOM MESH Y12@150c/c
S-19
G
A6
4-Y16 OTTOM TOP&B
H
Description
Rev
Date
Checked
Authorised
Client:
Mr. Mohamed FARUQE
J 2
S-19
K
4-Y16 OTTOM TOP&B
Project Title:
D S-19
B+G+1+R VILLA Plot No. 123 - DUBAI HILLS
A7 Contractor:
L Consultant:
08
7
SCHEDULE OF FIRST FLOOR BEAMS
1ST SLAB AND BEAM LAYOUT SCALE
1:75
TYPE
SIZE BxD (mm)
BOTTOM REINFORCEMENT
TOP REINFORCEMENT
ALL THROUGH
EXTRA BAR AT MID SPAN
ALL THROUGH
EXTRA BARS CONTINUOUS SUPPORT
STIRRUPS SIDE BARS
EXTRA BARS (EACH FACE) END SUPPORT
REMARKS NEAR SUPP.L/4
NOMINAL
B1
250 x 600
3-Y20
2-Y20
2-Y20
2-Y20
2-Y20
---
2-Y10@150 c/c
2-Y10@150 c/c
-
B2
250 x 700
4-Y20
2-Y20
2-Y20
2-Y20
--
---
2-Y10@150 c/c
2-Y10@150 c/c
-
B3
500 x 600
4-Y25
2-Y25
4-Y20
---
2-Y20
---
4L-Y12@150 c/c 4L-Y12@150 c/c
-
B4
1250 x 600
8-Y20
4-Y20
8-Y16
---
4-Y20
---
8L-Y10@150 c/c 6L-Y10@150 c/c
-
B5
1200 x 600
8-Y20
4-Y20
8-Y16
---
4-Y20
---
6L-Y10@150 c/c 6L-Y10@150 c/c
-
CB1
250 x 600
2-Y20
---
2-Y20
3-Y25
TRB1
750 x 800
4-Y25+4-Y25
2-Y25
4-Y20+2-Y20
---
2-Y10@150 c/c 2-Y10@150 c/c --SCHEDULE OF FIRST FLOOR BEAMS 4L-Y12@150 c/c 4L-Y12@150 c/c TRANSFER BEAM 3-Y20 2-Y20
---
Architect
Katherine W. Lee
Reg. No.
104029
Structural Engineer
Ravikumar Arjun
Reg. No.
57650
Drawing title:
1ST SLAB AND BEAM LAYOUT Original Scale
Drawn
Checked RY
1:75
Date: JULY-2022
Authorised RK
Date: JULY-2022
Plot Size RY
Date: JULY-2022 Sheet #
Project Number
22 - 460
S-16
A1
Rev
0
NOTES :-
Fcu - 45 N/mm² Fy - 460 N/mm² Contractor to Follow Concrete Specification According to Dubai Municipality Circular No. 225.
01
02 03
04
05
06 07 09
10 11
12
1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN MILLIMETER & LEVELS IN METER. UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS.
13
5. ALL SERVICES CUT-OUTS, EQUIPMENTS & EQUIPMENTS PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
- CONTINUOUS COLUMN - TERMINATED COLUMN - PLANTED COLUMN - RCC BASEMENT WALL
A1
A B
A 5000
L=10000
A2
4-Y16 TOP&BOTTOM 4-Y16 TOP&BOTTOM
C 4-Y16 TOP&BOTTOM
A3 T=300mm
D
PROPOSED
4-Y16 TOP&BOTTOM
A4
BOTTOM MESH Y12@150c/c
B L=160
0
4500
4-Y16 TOP&BOTTOM
A5
4-Y16 TOP&BOTTOM
E F
3-Y16 TOP&BOTTOM
T=300mm 4-Y16 TOP&BOTTOM 4-Y16 OTTOM TOP&B
BOTTOM MESH Y12@150c/c
G
Date
Checked
Authorised
Client:
Mr. Mohamed FARUQE
A6
4-Y16 OTTOM TOP&B
H
Description
Rev
Project Title:
J
B+G+1+R VILLA Plot No. 123 - DUBAI HILLS
4-Y16 OTTOM TOP&B
K
Contractor:
A7
Consultant:
L
08
Architect
Katherine W. Lee
Reg. No.
104029
Structural Engineer
Ravikumar Arjun
Reg. No.
57650
Drawing title:
1ST SLAB EXTRA BOTTOM REINFORCEMENT LAYOUT
7
1ST SLAB EXTRA BOTTOM REINFORCEMENT LAYOUT SCALE
1:75
Original Scale
Drawn
Checked RY
1:75
Date: JULY-2022
Authorised RK
Date: JULY-2022
Plot Size RY
Date: JULY-2022 Sheet #
Project Number
22 - 460
S-17
A1
Rev
0
NOTES :-
Fcu - 45 N/mm² Fy - 460 N/mm² Contractor to Follow Concrete Specification According to Dubai Municipality Circular No. 225.
01
02 03
04
05
06 07 09
10 11
12
1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN MILLIMETER & LEVELS IN METER. UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS.
13
5. ALL SERVICES CUT-OUTS, EQUIPMENTS & EQUIPMENTS PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
- CONTINUOUS COLUMN - TERMINATED COLUMN - PLANTED COLUMN - RCC BASEMENT WALL
A1
A L=10000
4-Y16 TOP&BOTTOM
2500
B
2500
L=2500
C
A2
4-Y16 TOP&BOTTOM
L=2500
B
A
L=5000
A
B
4-Y16 TOP&BOTTOM
T=300mm
4-Y16 TOP&BOTTOM
A L=3000
3000
2500
A4 A A L=160
4209
B
PROPOSED
4800
L=2500
D
A3
L=2500
C
TOP MESH Y12@150c/c
0
L=3000
4500
4-Y16 TOP&BOTTOM
A5
4-Y16 TOP&BOTTOM
E F
3-Y16 TOP&BOTTOM
L=2500
C
4600
T=300mm
4-Y16 TOP&BOTTOM 4-Y16 OTTOM TOP&B
TOP MESH Y12@150c/c
G
Description
Rev
Date
Checked
Authorised
Client:
A6
H A 3000
L=3000
Project Title:
A
L=4200
3000
J
Mr. Mohamed FARUQE
A
L=3000
3500
4-Y16 OTTOM TOP&B
B
L=2500
2500
B+G+1+R VILLA Plot No. 123 - DUBAI HILLS
4-Y16 OTTOM TOP&B
A
L=3800
K A7
L=3000
Contractor:
B
3000
A
L=2500
L
Consultant:
08
Architect
Katherine W. Lee
Reg. No.
104029
Structural Engineer
Ravikumar Arjun
Reg. No.
57650
Drawing title:
7
1ST SLAB EXTRA TOP REINFORCEMENT LAYOUT SCALE
1:75
1ST SLAB EXTRA TOP REINFORCEMENT LAYOUT Original Scale
Drawn
Checked RY
1:75
Date: JULY-2022
Authorised RK
Date: JULY-2022
Plot Size RY
Date: JULY-2022 Sheet #
Project Number
22 - 460
S-18
A1
Rev
0
NOTES :-
Fcu - 45 N/mm² Fy - 460 N/mm² Contractor to Follow Concrete Specification According to Dubai Municipality Circular No. 225.
1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN MILLIMETER & LEVELS IN METER. UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENTS & EQUIPMENTS PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
SECTION A - A
SECTION B - B
SECTION C - C
SCALE 1:20
SCALE 1:20
SCALE 1:20
PROPOSED
Description
Rev
Date
Checked
Authorised
Client:
Mr. Mohamed FARUQE
Project Title:
B+G+1+R VILLA Plot No. 123 - DUBAI HILLS
Contractor:
SECTION -1 DETAILS - B4
SECTION-2 DETAILS - B5
SCALE 1:20
SCALE 1:20
Consultant:
SECTION D - D SCALE 1:20 Architect
Katherine W. Lee
Reg. No.
104029
Structural Engineer
Ravikumar Arjun
Reg. No.
57650
Drawing title:
1ST SLAB SECTIONS DETAILS Original Scale
Drawn
Checked RY
1:20
Date: JULY-2022
Authorised RK
Date: JULY-2022
Plot Size RY
Date: JULY-2022 Sheet #
Project Number
22 - 460
S-19
A1
Rev
0
NOTES :-
01
02 03
04
05
06 07 09
10 11
12
Fcu - 45 N/mm² Fy - 460 N/mm²
13
Contractor to Follow Concrete Specification According to Dubai Municipality Circular No. 225.
1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN MILLIMETER & LEVELS IN METER. UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENTS & EQUIPMENTS PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
- CONTINUOUS COLUMN G
S-23
- TERMINATED COLUMN - PLANTED COLUMN - RCC BASEMENT WALL
A1
A B
A2
G
S-23
C
C
S-23
B
T=300mm
S-23
A3
4-Y16 TOP&BOTTOM
TOP MESH Y12@150c/c BOTTOM MESH Y12@150c/c
D
A4 C
4-Y16 TOP&BOTTOM
S-23
A5
PROPOSED
4-Y16 TOP&BOTTOM
E
3-Y16 TOP&BOTTOM
F 4-Y16 TOP&BOTTOM
T=300mm
A
S-23
G
TOP MESH Y12@150c/c BOTTOM MESH Y12@150c/c
A6
H 4-Y16 OTTOM TOP&B
Description
Rev
Date
Checked
Authorised
4-Y16 TOP&BOTTOM
S-23
G
Client:
J
Mr. Mohamed FARUQE 4-Y16 OTTOM TOP&B
K Project Title:
A7
B+G+1+R VILLA Plot No. 123 - DUBAI HILLS
Contractor:
F
T=350mm
D
S-23
S-23
L TOP MESH Y12@150c/c BOTTOM MESH Y12@150c/c
Consultant:
08
8
ROOF SLAB AND BEAM LAYOUT SCALE
SCHEDULE OF ROOF SLAB BEAMS
1:75 TYPE
SIZE BxD (mm)
BOTTOM REINFORCEMENT
TOP REINFORCEMENT
ALL THROUGH
EXTRA BAR AT MID SPAN
ALL THROUGH
EXTRA BARS CONTINUOUS SUPPORT
STIRRUPS SIDE BARS
EXTRA BARS END SUPPORT
(EACH FACE)
Architect
Katherine W. Lee
Reg. No.
104029
Structural Engineer
Ravikumar Arjun
Reg. No.
57650
REMARKS NEAR SUPP.L/4
NOMINAL
Drawing title:
B1
250 x 600
3-Y20
2-Y20
2-Y20
2-Y20
2-Y20
---
2-Y10@150 c/c
2-Y10@150 c/c
-
B2
250 x 700
4-Y20
2-Y20
2-Y20
2-Y20
---
---
2-Y10@150 c/c
2-Y10@150 c/c
-
B3
500 x 600
4-Y25
2-Y25
4-Y20
---
2-Y20
---
4L-Y12@150 c/c 4L-Y12@150 c/c
-
2-Y10@150 c/c
-
2-Y10@150 c/c
-
B4
250 x 1000
4-Y25
2-Y25
2-Y20
---
2-Y25
2-Y16
2-Y10@150 c/c
CB1
250 x 600
2-Y20
---
2-Y20
3-Y25
---
---
2-Y10@150 c/c
ROOF SLAB AND BEAM LAYOUT Original Scale
Drawn
Checked RY
1:75
Date: JULY-2022
Authorised RK
Date: JULY-2022
Plot Size RY
Date: JULY-2022 Sheet #
Project Number
22 - 460
S-20
A1
Rev
0
NOTES :-
Fcu - 45 N/mm² Fy - 460 N/mm²
01
02 03
04
05
06 07 09
10 11
12
Contractor to Follow Concrete Specification According to Dubai Municipality Circular No. 225.
13
1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN MILLIMETER & LEVELS IN METER. UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENTS & EQUIPMENTS PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
A1
A B 4540
B 500
A2
L=6
4540
C
A3 4-Y16 TOP&BOTTOM
D
A4
T=300mm
PROPOSED
4-Y16 TOP&BOTTOM
BOTTOM MESH Y12@150c/c
A5
4-Y16 TOP&BOTTOM
3-Y16 TOP&BOTTOM
A
E
L=250
F
0
A
4-Y16 TOP&BOTTOM
L=4000
T=300mm
G BOTTOM MESH Y12@150c/c
A6
Description
Rev
H
Date
Checked
Authorised
Client: 4-Y16 =2500 OTTOM L TOP&B
A
J
Mr. Mohamed FARUQE
0 L=250
A
4-Y16 TOP&BOTTOM
Project Title:
4-Y16 OTTOM TOP&B
K
B+G+1+R VILLA Plot No. 123 - DUBAI HILLS
A7 Contractor:
T=350mm
L
A 1700
L=8600
BOTTOM MESH Y12@150c/c
Consultant:
08 Architect
Katherine W. Lee
Reg. No.
104029
Structural Engineer
Ravikumar Arjun
Reg. No.
57650
Drawing title:
7
ROOF SLAB EXTRA BOTTOM REINFORCEMENT LAYOUT
ROOF SLAB EXTRA BOTTOM REINFORCEMENT LAYOUT SCALE
1:75
Original Scale
Drawn
Checked RY
1:75
Date: JULY-2022
Authorised RK
Date: JULY-2022
Plot Size RY
Date: JULY-2022 Sheet #
Project Number
22 - 460
S-21
A1
Rev
0
NOTES :-
Fcu - 45 N/mm² Fy - 460 N/mm²
01
02 03
04
05
06 07 09
10 11
12
Contractor to Follow Concrete Specification According to Dubai Municipality Circular No. 225.
13
1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN MILLIMETER & LEVELS IN METER. UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENTS & EQUIPMENTS PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
A1
A 6300
B 500
A
L=6
L=5500
4540
D
A2
4540
C
A3 B
4-Y16 TOP&BOTTOM
B
L=2500
L=3000
D
6000
3000
B
L=3000
A4
PROPOSED
4200
B
B L=2500
4-Y16 TOP&BOTTOM
L=3000
A5 4-Y16 TOP&BOTTOM
B
3-Y16 TOP&BOTTOM
L=3000
E
2500
F 4-Y16 TOP&BOTTOM
T=300mm T=300mm
G
B TOP MESH Y12@150c/c
L=2500 3000
H
TOP MESH Y12@150c/c
A6
Authorised
Mr. Mohamed FARUQE
L=3000
L=1300
A
Checked
B
4-Y16 OTTOM TOP&B
A
4-Y16 TOP&BOTTOM
Date
Client:
L=3000 L=5750
Description
Rev
B
J
Project Title:
4-Y16 OTTOM TOP&B
K
B+G+1+R VILLA Plot No. 123 - DUBAI HILLS
A7 Contractor:
8800
T=350mm
L
A 1700
A TOP MESH Y12@150c/c
L=2350
L=8600
Consultant:
08 Architect
Katherine W. Lee
Reg. No.
104029
Structural Engineer
Ravikumar Arjun
Reg. No.
57650
Drawing title:
7
ROOF SLAB EXTRA TOP REINFORCEMENT LAYOUT
ROOF SLAB EXTRA TOP REINFORCEMENT LAYOUT SCALE
1:75
Original Scale
Drawn
Checked RY
1:75
Date: JULY-2022
Authorised RK
Date: JULY-2022
Plot Size RY
Date: JULY-2022 Sheet #
Project Number
22 - 460
S-22
A1
Rev
0
NOTES :-
Fcu - 45 N/mm² Fy - 460 N/mm² Contractor to Follow Concrete Specification According to Dubai Municipality Circular No. 225.
1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN MILLIMETER & LEVELS IN METER. UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENTS & EQUIPMENTS PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
SECTION A - A
SECTION B - B
SECTION C - C
SCALE 1:20
SCALE 1:20
SCALE 1:20
PROPOSED
Description
Rev
Date
Checked
Authorised
Client:
Mr. Mohamed FARUQE
Project Title:
B+G+1+R VILLA Plot No. 123 - DUBAI HILLS
Contractor:
Consultant:
SECTION D - D SCALE 1:20
SECTION G - G SECTION F - F
SCALE 1:20
SCALE 1:20 Architect
Katherine W. Lee
Reg. No.
104029
Structural Engineer
Ravikumar Arjun
Reg. No.
57650
Drawing title:
ROOF SLAB SECTIONS DETAILS Original Scale
Drawn
Checked RY
1:20
Date: JULY-2022
Authorised RK
Date: JULY-2022
Plot Size RY
Date: JULY-2022 Sheet #
Project Number
22 - 460
S-22
A1
Rev
0
NOTES :-
01
02 03
04
05
06 07 09
10 11
12
Fcu - 45 N/mm² Fy - 460 N/mm²
13
Contractor to Follow Concrete Specification According to Dubai Municipality Circular No. 225.
1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN MILLIMETER & LEVELS IN METER. UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENTS & EQUIPMENTS PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
A1
A B
A2
C
A3
D
A4
PROPOSED
A5
E F
T=200mm
TOP MESH Y12@150c/c BOTTOM MESH Y12@150c/c
G
A6
H Description
Rev
Date
Checked
Authorised
Client:
J
Mr. Mohamed FARUQE
K
Project Title:
A7
B+G+1+R VILLA Plot No. 123 - DUBAI HILLS
Contractor:
L
Consultant:
SECTION A - A
08
SCALE 1:20
8
TOP ROOF SLAB LAYOUT SCALE
SCHEDULE OF FIRST FLOOR BEAMS
1:75 TYPE
SIZE BxD (mm)
BOTTOM REINFORCEMENT
TOP REINFORCEMENT
ALL THROUGH
EXTRA BAR AT MID SPAN
ALL THROUGH
EXTRA BARS CONTINUOUS SUPPORT
STIRRUPS
SIDE BARS EXTRA BARS (EACH FACE) END SUPPORT
REMARKS NEAR SUPP.L/4
NOMINAL
Architect
Katherine W. Lee
Reg. No.
104029
Structural Engineer
Ravikumar Arjun
Reg. No.
57650
Drawing title:
TOP ROOF SLAB LAYOUT & DETAILS
B1
250 x 500
--
--
--
--
--
--
--
--
-
B2
200 x 500
--
--
--
--
--
--
--
--
-
Original Scale
200 x 500
--
--
--
--
--
--
--
--
Checked RY
1:75
CB1
Drawn
-
Date: JULY-2022
Authorised RK
Date: JULY-2022
Plot Size RY
Date: JULY-2022 Sheet #
Project Number
22 - 460
S-24
A1
Rev
0
NOTES :-
Fcu - 45 N/mm² Fy - 460 N/mm² Contractor to Follow Concrete Specification According to Dubai Municipality Circular No. 225.
01
02
1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN MILLIMETER & LEVELS IN METER. UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS.
03
5. ALL SERVICES CUT-OUTS, EQUIPMENTS & EQUIPMENTS PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
6
E
5 4
2 1
F
50mm THICK SCREED
PROPOSED
2-LAYER 4mm SBS MEMBRANE
SECTION A - A
100mm THK. PCC (TYP.)
SCALE 1:25
1000 GAUGE POLYTHENE SHEET COMPACTED SOIL (MIN.95%) M.D.D. (TYP.)
G
22
Description
Rev
21 20
Date
Checked
Authorised
Client: 19 18
Mr. Mohamed FARUQE 17 16
16
15
J
X3 0W
14 13
X1
6.4 H
Project Title:
CM
12 11
B+G+1+R VILLA Plot No. 123 - DUBAI HILLS
10 9 8
Contractor:
7 6
S-17
A
S-17
B
K Consultant:
50mm THICK SCREED
SECTION B - B SCALE 1:25
2-LAYER 4mm SBS MEMBRANE
Architect
Katherine W. Lee
Reg. No.
104029
Structural Engineer
Ravikumar Arjun
Reg. No.
57650
100mm THK. PCC (TYP.) 1000 GAUGE POLYTHENE SHEET COMPACTED SOIL (MIN.95%) M.D.D. (TYP.)
Drawing title:
STAIR DETAILS Original Scale
Drawn
Checked RY
1:30
Date: JULY-2022
Authorised RK
Date: JULY-2022
Plot Size RY
Date: JULY-2022 Sheet #
Project Number
22 - 460
S-25
A1
Rev
0
NOTES :-
Fcu - 45 N/mm² Fy - 460 N/mm² Contractor to Follow Concrete Specification According to Dubai Municipality Circular No. 225.
1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN MILLIMETER & LEVELS IN METER. UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENTS & EQUIPMENTS PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
P
A
B
C
D
E
F
G
H
J
K
L
L OT
MI
T
L I
A P
L OT L I MI
01
T
S-25
02 03 04
PROPOSED
05
BASEMENT TO GROUND RAMP SCALE 1:25
Description
Rev
Date
Checked
Authorised
Client:
Mr. Mohamed FARUQE
Project Title:
B+G+1+R VILLA Plot No. 123 - DUBAI HILLS
254
Contractor:
1000 GAUGE POLYTHENE SHEET 200mm COMPACTED ROAD BASE COMPACTED SOIL (MIN.95%) M.D.D. (TYP.)
Consultant:
50mm THICK SCREED 2-LAYER 4mm SBS MEMBRANE 100mm THK. PCC (TYP.) 1000 GAUGE POLYTHENE SHEET COMPACTED SOIL (MIN.95%) M.D.D. (TYP.)
Architect
Katherine W. Lee
Reg. No.
104029
Structural Engineer
Ravikumar Arjun
Reg. No.
57650
Drawing title:
RAMP SECTION SCALE 1:50
RAMP SECTION DETAILS Original Scale
Drawn
Checked RY
1:75
Date: JULY-2022
Authorised RK
Date: JULY-2022
Plot Size RY
Date: JULY-2022 Sheet #
Project Number
22 - 460
S-26
A1
Rev
0
NOTES :-
Fcu - 45 N/mm² Fy - 460 N/mm² Contractor to Follow Concrete Specification According to Dubai Municipality Circular No. 225.
1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN MILLIMETER & LEVELS IN METER. UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS.
430 SUNKEN SUNKEN LOUNGE LOUNGE
90
325
100
1032
60
90.5
130
310
275
50
330
360
SWIMMING POOL
SWIMMING POOL
80 80
10
80
10
50
140
-1.35
275
50
60
+6.10
100
+0.40
+0.40 1032
133.5
240
658
30
1032
+0.35
320
-0.20
120
165
343.5
10 30 10 30 10 30 10
83.5
140
100
30 100
220
220
60
30
425
10 30 15 30 15
+0.35
120
110
10 30 15 30 1510 30 15 30 15 30
100 100
+0.35
+0.40
30
60
10
10
300
10
60
30
60
-0.20 370 -0.20
+0.45
+0.45
10 150
80
80
FIRE PLACE
FIRE PIT
+0.45 +0.45 60 60
330
350
10
JACUZZI JACUZZI
230
-0.55
FIRE PIT
10
FIRE PLACE
80
10
60
60
50
10
10
5. ALL SERVICES CUT-OUTS, EQUIPMENTS & EQUIPMENTS PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
+0.35
+0.35 120
778
120
PROPOSED
10 30 10 30 10 30 10
POOL & JACUZZI LAYOUT
45
JACUZZI
Description
Rev
SWIMMING POOL 170
45
FIRE PIT
180
STRIP LIGHT
45
30
45
45
40
FIRE PLACE
Date
Checked
Authorised
Client:
Mr. Mohamed FARUQE 50mm THICK SCREED 2-LAYER 4mm SBS MEMBRANE 100mm THK. PCC (TYP.)
Project Title:
1000 GAUGE POLYTHENE SHEET 200mm COMPACTED ROAD BASE COMPACTED SOIL (MIN.95%) M.D.D. (TYP.)
B+G+1+R VILLA Plot No. 123 - DUBAI HILLS
50mm THICK SCREED 2-LAYER 4mm SBS MEMBRANE 100mm THK. PCC (TYP.)
SECTION A-A
1000 GAUGE POLYTHENE SHEET
Contractor:
200mm COMPACTED ROAD BASE COMPACTED SOIL (MIN.95%) M.D.D. (TYP.)
30
30
Consultant:
80
15
FIRE PIT
170
15
15
15
45
30
15
15
40
40
50mm THICK SCREED
Architect
Katherine W. Lee
Reg. No.
104029
Structural Engineer
Ravikumar Arjun
Reg. No.
57650
2-LAYER 4mm SBS MEMBRANE
Drawing title:
100mm THK. PCC (TYP.) 1000 GAUGE POLYTHENE SHEET
SWIMMING POOL DETAILS
200mm COMPACTED ROAD BASE COMPACTED SOIL (MIN.95%) M.D.D. (TYP.) 50mm THICK SCREED 2-LAYER 4mm SBS MEMBRANE 100mm THK. PCC (TYP.)
SECTION B-B
SECTION C-C
Original Scale
200mm COMPACTED ROAD BASE
Checked RY
1:40
1000 GAUGE POLYTHENE SHEET
COMPACTED SOIL (MIN.95%) M.D.D. (TYP.)
Drawn Date: JULY-2022
Authorised RK
Date: JULY-2022
Plot Size RY
Date: JULY-2022 Sheet #
Project Number
22 - 460
S-27
A1
Rev
0
NOTES :-
Fcu - 45 N/mm² Fy - 460 N/mm² Contractor to Follow Concrete Specification According to Dubai Municipality Circular No. 225.
1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN MILLIMETER & LEVELS IN METER. UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS.
1
2
1
5. ALL SERVICES CUT-OUTS, EQUIPMENTS & EQUIPMENTS PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
2
²
A
A COLUMNS SCHEDULE
² T=300mm
B
COLUMN ID
C1
B
1
COLUMN LAYOUT SCALE
1
FOUNDATION TO ROOF
2
LINK
8-Y16
2-Closed Link Y10@150c/c
FOUNDATION LAYOUT
1:50
SCALE
2
MAIN REINFORCEMENT
1
PROPOSED
1:50
2
COLD APPLIED BITUMEN 100mm THK. PCC (TYP.)
SECTION A - A
1000 GAUGE POLYTHENE SHEET
SCALE 1:20
SECTION B - B
COMPACTED SOIL (MIN.95%) M.D.D. (TYP.)
A
Checked
Authorised
Mr. Mohamed FARUQE
SCALE 1:20
T=200mm
A
Project Title:
B S-25
S-25
SCHEDULE OF TIE-BEAMS
TYPE
TB1
B
Date
Client:
TYPICAL RAFT DETAILS
A T=100mm
Description
Rev
SCALE 1:20
SIZE BxD (mm)
200 x 500
BOTTOM REINFORCEMENT
TOP REINFORCEMENT
ALL THROUGH
EXTRA BAR AT MID SPAN
ALL THROUGH
EXTRA BARS CONTINUOUS SUPPORT
2-Y20
--
2-Y20
---
B+G+1+R VILLA Plot No. 123 - DUBAI HILLS
STIRRUPS SIDE BARS
EXTRA BARS (EACH FACE) END SUPPORT
---
---
REMARKS NEAR SUPP.L/4
NOMINAL
Y10@150 c/c
Y10@150 c/c
Contractor:
B SCHEDULE OF ROOF BEAMS
TYPE
3
TIE-BEAM LAYOUT SCALE
1:150
4
ROOF SLAB LAYOUT SCALE
B1
SIZE BxD (mm)
200 x 500
BOTTOM REINFORCEMENT
STIRRUPS
TOP REINFORCEMENT
ALL THROUGH
EXTRA BAR AT MID SPAN
ALL THROUGH
EXTRA BARS CONTINUOUS SUPPORT
2-Y20
---
2-Y20
---
SIDE BARS EXTRA BARS (EACH FACE) END SUPPORT
---
---
REMARKS NEAR SUPP.L/4
NOMINAL
Y10@150 c/c
Y10@150 c/c
Consultant:
1:50
Architect
Katherine W. Lee
Reg. No.
104029
Structural Engineer
Ravikumar Arjun
Reg. No.
57650
Drawing title:
GARBAGE AND ELEC. ROOM STRUCTURAL DETAILS Original Scale
Drawn
Checked RY
1:75
Date: JULY-2022
Authorised RK
Date: JULY-2022
Plot Size RY
Date: JULY-2022 Sheet #
Project Number
22 - 460
S-28
A1
Rev
0
NOTES :-
F1/C4
SUNKEN LOUNGE
F1/C4
JACUZZI
FIRE PIT +0.45
A
F1/C1
S-29
+0.45
TB1
B
SWIMMING POOL -1.35
+0.40
C1/F1
A
2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN MILLIMETER & LEVELS IN METER. UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER.
5. ALL SERVICES CUT-OUTS, EQUIPMENTS & EQUIPMENTS PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
SCHEDULE OF BOUNDARY WALL FOOTINGS SIZE (mm)
DEPTH (mm)
F1
1100 X 1350
F2
TYPE
F1/C1
+0.35
CTB
1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY.
4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS.
IN CASE OF DEFERENT IN LEVEL IS ENCOUNTERED BEYOND 1.2 METER THE CONSULTANT HAVE TO SUBMIT RETAINING WALL DESIGN FOR APPROVAL. FORMATION LEVEL OF BOUNDARY WALL FOUNDATION SHALL BE AT A MINIMUM OF -1.0 METER BELOW NATURAL GROUND LEVEL.
S-29
TB1
-0.20
NO EXCAVATION ALLOWED BENEATH ANY NEIGHBORING FOUNDATION
S-29
F1/C4
F1/C4
FIRE PLACE
F2/C4
F1/C4
CTB
F1/C1
F1/C4
TB1
TB1
TB1
TB1
F1/C1
TB1
Contractor to Follow Concrete Specification According to Dubai Municipality Circular No. 225.
EXPANSION JOINT EVERY 16 METER.
TB1
CF2/C4/C4
TB1 TB1
B
S-29
F
TB1
TB1
Fcu - 45 N/mm² Fy - 460 N/mm²
NOTES:
F1/C1
TB1
S-29
Notes: Back side boundary wall footing Should be in same level with the swimming pool footing level.
C1
BOTTOM REINFORCEMENT
TOP REINFORCEMENT TYPE
LONG SPAN
SHORT SPAN
LONG SPAN
SHORT SPAN
350
Y12 @ 200 c/c
Y12 @ 200 c/c
Y12 @ 200 c/c
Y12 @ 200 c/c
ECCENTRIC
1400 X 1400
350
Y12 @ 200 c/c
Y12 @ 200 c/c
Y12 @ 200 c/c
Y12 @ 200 c/c
ECCENTRIC
CF1
1800 X 1200
350
Y12 @ 200 c/c
Y12 @ 200 c/c
Y12 @ 200 c/c
Y12 @ 200 c/c
COMBINED
CF2
2300 X 1300
350
Y12 @ 200 c/c
Y12 @ 200 c/c
Y12 @ 200 c/c
Y12 @ 200 c/c
COMBINED
REMARKS
C1 SCHEDULE OF BOUNDARY WALL TIE-BEAMS
TYPE
C
C1
S-29
C
S-29
SIZE BxD (mm)
BOTTOM REINFORCEMENT
TOP REINFORCEMENT
ALL THROUGH
EXTRA BAR AT MID SPAN
ALL THROUGH
EXTRA BARS CONTINUOUS SUPPORT
STIRRUPS SIDE BARS
EXTRA BARS (EACH FACE) END SUPPORT
REMARKS NEAR SUPP.L/4
NOMINAL
TB1
200 x 400
3-Y16
---
3-Y16
---
---
---
2L-Y8@150 c/c
2L-Y10@200 c/c
--
CTB
200 x 400
3-Y16
---
3-Y16
---
---
---
2L-Y8@150 c/c
2L-Y10@200 c/c
--
C1
C1
PROPOSED
F1/C1
TB1
F1/C1
CTB
C1
TB1
B
S-29
A
CTB
S-29
B
SECTION A-A
SECTION B - B
SECTION C - C
NT SID
E
F1/C2 C7
F1/C2
F2/C5
A
F1/C2
F2/C6 TB1
F2/C2 TB1
CF1/C3 TB1
B+G+1+R VILLA Plot No. 123 - DUBAI HILLS
F1/C2
TB1
Contractor:
TB1
F1/C2
E
S-29
D
S-29
TB1
TB1
Authorised
S-29
TB1 / FRO
Checked
Mr. Mohamed FARUQE
Project Title:
ROAD
Date
Client:
F1/C1
F1/C1
CTB
Description
Rev
TB1
F1/C1
TB1
F1/C1
S-29
8
BOUNDARY WALL LAYOUT SCALE
10Y12 LINK-Y8@150 c/c
COLUMN-C1
Consultant:
1:100
8Y12 LINK-Y8@150 c/c
COLUMN-C2
12Y12 Y8@150 c/c
COLUMN-C4
Architect
Katherine W. Lee
Reg. No.
104029
Structural Engineer
Ravikumar Arjun
Reg. No.
57650
Drawing title:
BOUNDARY WALL LAYOUT AND DETAILS 12Y12 Y8@150 c/c
12Y12 Y8@150 c/c
COLUMN-C6
COLUMN-C7
SECTION D - D
SECTION E - E
Original Scale
COLUMN-C3
8Y12 Y8@150 c/c
COLUMN-C5
Checked RY
1:100 14Y12 Y8@150 c/c
Drawn
SECTION F - F
Date: JULY-2022
Authorised RK
Date: JULY-2022
Plot Size RY
Date: JULY-2022 Sheet #
Project Number
22 - 460
S-29
A1
Rev
0
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY.
COLUMN BAR
A
TOP BARS
2'6"
50 d
UPPER COLUMN
DOWEL BARS
2. DO NOT SCALE FROM THE DRAWINGS.
CONC. 1:4:8
3. ALL DIMENSIONS ARE IN MILLIMETER & LEVELS IN METER. UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS.
TOP BARS ROOF SLAB
5. ALL SERVICES CUT-OUTS, EQUIPMENTS & EQUIPMENTS PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
BOTTOM EXTRA BARS
BOTTOM EXTRA BARS
SLOPE 1:6 BOTTOM BARS
BOTTOM ALTHROUGH BARS
A
COLUMN BAR
COLUMN LINK
SECTION AT A-A
LOWER COLUMN
TYPICAL ARRANGEMENT OF SIMPLY SUPPORTED BEAM BARS
DETAIL OF COLUMN SIZE REDUCTION
1.5 X CL
0.30 L1OR0.30 L2
0.30 L1 OR 0.30 L2
WHICH EVER IS MORE
WHICH EVER IS MORE
0.30 L1
BOTTOM BARS (SHORT SPAN)
0.30 L1
ALTERNATE BAR Y 8 @ 8" C/C
TOP BARS
ALTERNATE TOP BARS CRANKED DOWN
TYPICAL DETAIL OF PROVISION FOR FUTURE EXTENSION OF COLUMNS
ALTERNATE BAR
BOTTOM BARS (LONG SPAN)
BOTTOM BARS (LONG SPAN)
BOTTOM BARS (SHORT SPAN)
L1 CL
L1
L2
CANTILEVER SLAB
TOP BARS FROM L2
PROPOSED
TYPICAL ARRANGEMENT OF SINGLE SPAN SLAB BARS
TYPICAL ARRANGEMENT OF CANTILEVER SLAB BARS
O.30 L1 OR 0.30 L2
0.30 L1 OR 0.30 L2
WHICHEVER IS MORE
WHICHEVER IS MORE
TOP BARS FROM L1
TOP EXTRA BARS
Description
Rev
Date
Checked
Authorised
Client:
LATERAL REINFORCEMENT
BOTTOM EXTRA BARS
Mr. Mohamed FARUQE
BOTTOM ALTHROUGH BARS 0.15 L1
0.15 L1 Project Title:
L2
L1 B
0.25 L1
B
O.25 L2
A
B+G+1+R VILLA Plot No. 123 - DUBAI HILLS
A Contractor:
TYPICAL JUNCTION DETAIL FOR BEAM OF DIFFERENT DEPTHS
Consultant:
0.30 L1
0.30 L1
0.30 L2 ALTERNATE BAR
ALTERNATE BAR
0.30 L2 OR 0.30 L3
O.30 L2 OR 0.30 L3
WHICHEVER IS MORE
WHICHEVER IS MORE TOP BARS OVER SUPPORT
ALTERNATE BAR
BOTTOM BARS (SHORT SPAN)
BOTTOM BARS (LONG SPAN)
Architect
Katherine W. Lee
Reg. No.
104029
Structural Engineer
Ravikumar Arjun
Reg. No.
57650
Drawing title:
L1
L2
L3
GENERAL DETAILS - 1 Original Scale
TYPICAL ARRANGEMENT OF SUNK SLAB BARS
Drawn
Checked RY
N.T.S
Date: JULY-2022
Authorised RK
Date: JULY-2022
Plot Size RY
Date: JULY-2022 Sheet #
Project Number
22 - 460
S-30
A1
Rev
0
NOTES :-
0.30 L1 OR 0.30 L2
0.30 L1 OR O.30 L2
WHICHEVER IS MORE
WHICHEVER IS MORE
1
0.30 L2 OR 0.30 L3
0.30 L2 OR O.30 L3
WHICHEVER IS MORE
WHICHEVER IS MORE
1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY. 2. DO NOT SCALE FROM THE DRAWINGS.
TOP BARS TOP EXTRA BARS
TOP EXTRA BARS
BOTTOM EXTRA BARS
BOTTOM EXTRA BARS
BOTTOM ALTHROUGH BARS
BOTTOM EXTRA BARS
STIRRUPS
BOTTOM EXTRA BARS BOTTOM BARS
BOTTOM ALTHROUGH BARS
0.80 L1
0.15 L1
1
0.15 L2
L1
0.15 L2
0.25 L1
0.25 L2
A
A
B
0.25 L2
0.25 L3
A
A
B
STIRRUPS
4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENTS & EQUIPMENTS PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
0.15 L3
L2
0.25 L1
A
3. ALL DIMENSIONS ARE IN MILLIMETER & LEVELS IN METER. UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER.
SECTION AT 1-1 B STIRRUPS
STIRRUPS
TYPICAL ARRANGEMENT OF CONTINUOUS BEAM BARS 1.5XCL CL
2 TOP BARS
TOP BARS
TOP EXTRA BARS
BOTTOM EXTRA BARS
BOTTOM ALTHROUGH BARS
BOTTOM BARS
0.15 L1
2
0.15 L1
CL
L1 0.25 L1 A
CANTILEVER BEAM STIRRUPS A
STIRRUPS
0.25 L1 A
B
SECTION AT 2-2
TYPICAL ARRANGEMENT OF CANTILEVER BEAM BARS
0.30 L1 OR 0.30 L2
0.30 L2 OR 0.30 L3
WHICHEVER IS MORE
WHICHEVER IS MORE A252 WIRE MESH BOTHWAYS TOP BARS OVER SUPPORT
ALTERNATE BAR
Y 8 @ 8" C/C
BOTTOM BARS (SHORT SPAN)
BOTTOM BARS (LONG SPAN)
L1
0.30 L2 OR 0.30 L3 WHICHEVER IS MORE
WHICHEVER IS MORE A252 WIRE MESH BOTHWAYS TOP BARS OVER SUPPORT
BOTTOM BARS (LONG SPAN)
TOP BARS
Y 8 @ 8" C/C
L3
L2
27" OR MORE
0.30 L1 OR 0.30 L2
D
0.30 L1
PROPOSED
LATERAL REINF. STIRRUPS BOTTOM BARS
TYPICAL SECTION FOR DEEP BEAM
TYPICAL ARRANGEMENT OF CONTINUOUS SLAB BARS
Description
Rev
TILES MORTAR SAND CONCRETE SLAB
Date
Checked
Authorised
THICKNESS AS LAYOUT DRAWING Client:
PROTECTION ALUM. PLATE STRIP JOINT SEALANT MATERIAL
THICKNESS AS LAYOUT DRAWING
Mr. Mohamed FARUQE
DECORATIVE CLOSURE JOINT SEALANT MATERIAL
Project Title:
JOINT FILLER MATERIAL
JOINT FILLER MATERIAL
B+G+1+R VILLA Plot No. 123 - DUBAI HILLS
JOINT SEALANT MATERIAL
DECORATIVE CLOSURE
Contractor:
K
DECORATIVE CLOSURE
VERTICAL EXTERIOR EXPANSION JOINT HORIZONTAL EXPANSION JOINT IN SLABS BELOW ROOF THICKNESS AS LAYOUT DRAWING TILES MORTAR SAND OR LIGHTWEIGHT CONCRETE CONCRETE SLAB
Consultant:
DECORATIVE CLOSURE THICKNESS AS LAYOUT DRAWING ISOLATIVE FIXING
PROTECTION ALUM. PLATE STRIP JOINT SEALANT MATERIAL
SLOPE AWAY FROM JOINT
SLOPE AWAY FROM JOINT
JOINT FILLER MATERIAL
JOINT FILLER MATERIAL DECORATIVE CLOSURE WATER STOP
Architect
Katherine W. Lee
Reg. No.
104029
Structural Engineer
Ravikumar Arjun
Reg. No.
57650
Drawing title:
VERTICAL INTERIOR EXPANSION JOINT
GENERAL DETAILS - 2
JOINT SEALANT MATERIAL
DECORATIVE CLOSURE
HORIZONTAL EXPANSION JOINT IN ROOF SLAB
JOINT SEALANT MATERIAL IS TO PREVENT PASSING OF AIR AND WATER THROUGH,AND TO RETAIN ITS PROPERTIES BY TIME UNDER ALL WEATHER CONDITIONS AND SHOULD BE APPROVED BY THE CONSULTANT
DETAIL DUCTED OPENING IN BEAMS
Original Scale
Drawn
Checked RY
N.T.S
Date: JULY-2022
Authorised RK
Date: JULY-2022
Plot Size RY
Date: JULY-2022 Sheet #
Project Number
22 - 460
S-31
A1
Rev
0
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY.
GENERAL DETAILS (Contd.)
2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN MILLIMETER & LEVELS IN METER. UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENTS & EQUIPMENTS PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
MESH A-393
Y10@200c/c Y10@200c/c
ASPER MEP REQUIREMENTS
SIPOREX BLOCK
ASPER MEP REQUIREMENTS
Y10@200c/c Y10@200c/c
CONSTRUCTION JOINT
TYPICAL A/C BASE DETAIL
5.0 REINFORCEMENT NOTES: 5.1 HOOKS AND BENDS:
ALL SPLICES SHALL NOT BE LESS THAN
a) STANDARD HOOKS:
PROPOSED
Description
Rev
Date
Checked
Authorised
Client:
Mr. Mohamed FARUQE
Project Title:
B+G+1+R VILLA Plot No. 123 - DUBAI HILLS
Contractor:
Consultant:
TYPICAL COLUMN DETAILS
Architect
Katherine W. Lee
Reg. No.
104029
Structural Engineer
Ravikumar Arjun
Reg. No.
57650
Drawing title:
GENERAL DETAILS - 3 Original Scale
Drawn
Checked RY
N.T.S
Date: JULY-2022
Authorised RK
Date: JULY-2022
Plot Size RY
Date: JULY-2022 Sheet #
Project Number
22 - 460
S-32
A1
Rev
0
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY.
315°
NE
225°
NW
N
2. DO NOT SCALE FROM THE DRAWINGS.
SW
45°
SE
3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
135°
6. ALL SUBMISSIONS AND DRAWINGS ARE FOLLOWING M/S DDA AND M/S EMAAR REGULATIONS. KEYPLAN:
ABBREVIATIONS ADJ
ADJUSTABLE
AFF AL ALT ARCH AUTO AVG
AFTER FINISHED FLOOR ALUMINIUM ALTERNATE ARCHITECTURAL AUTOMATIC AVERAGE
BTM CLG CONG CONT CP CPU CSP CU DED DN DWG
EM EMGEN ENCL EXP
MAX MD
MAXIMUM MAXIMUM DEMAND
MECH
MECHANICAL
MFR MH MIN MM² MTD MF
MANUFACTURER MANHOLE MINIMUM SQUARE MILLIMETER MOUNTED MAKEUP FAN
NO NOM NTS
NUMBER NOMINAL NOT TO SCALE
CEILING CONCRETE CONTINUOUS CONTROL PANEL CENTRAL PROCESSING UNIT
OPNG
OPENING
PEND PH
PENDANT PENTHOUSE
CEILING SPEAKER COPPER
RM
ROOM
DEDICATED DOWN DRAWING
SECT SQ² STD STL STOR STRUCT SURF SUSP SEF
SECTION SQUARE METER STANDARD STEEL STORAGE STRUCTURAL SURFACE SUSPENDED SMOKE EXTRACT FAN
EMERGENCY ONLY ESSENTIAL SERVICE EMERGENCY GENERATOR-SAFETY SERVICE SOURCE ENCLOSURE EXPLOSION PROOF
TEL TEMP TERM TV TYP
TELEPHONE TEMPERATURE TERMINAL TELEVISION TYPICAL
FIRE ALARM FIRE ALARM CONTROL PANEL
FCU FIN
FAN COIL UNIT FINISH
FLR FP FTN FU
FLOOR FIRE PROTECTION FOUNTAIN FUSE
E01
GROUND
HGT
HEIGHT
H/L
HIGH LEVEL
INST INSUL
INSTANTANEOUS INSULATION
UNDER GROUND UNIT VENTILATOR
VDT
VISUAL DISPLAY TERMINAL
WP
WEATHER PROOF
W/M
WALL MOAUNTED
XLPE
CROSS LINKED POLYETHYLENE
ZCV
ZONE CONTROLE VALVE
KEY NOTE INDICATOR
DESCRIPTION
S
INTELLIGENT OPTICAL SMOKE DETECTOR WITH STANDARD BASE
S
INTELLIGENT OPTICAL SMOKE DETECTOR WITH SOUNDER BASE
XXX 001
ELECTRICAL EQUIPMENT INDICATOR
XX
SCHEDULED ITEM INDICATOR
H
INTELLIGENT HEAT DETECTOR WITH STANDARD BASE
X
DRAWING REVISION INDICATOR
MS
INTELLIGENT MULTISENSOR DETECTOR WITH STANDARD BASE
XXX 001
MECHANICAL EQUIPMENT INDICATOR
MS
INTELLIGENT MULTISENSOR DETECTOR WITH SOUNDER BASE ADDRESSABLE MANUAL CALL POINT (BREAK GLASS)
1 E105
ADDRESSABLE MANUAL CALL POINT (BREAK GLASS) WEATHERPROOF
DETAIL INDICATOR
ELECTRICAL LOOP SOUNDER
1 E001
ELEVATION/SECTION INDICATOR
ELECTRICAL LOOP SOUNDER (WEATHER PROOF)
CM
GENERAL NOTES
FIBRE OPTIC NETWORK CARD
FACP
EM
FIRE ALARM SYSTEM SHALL BE ADDRESSABLE TYPE 1. 2. 3. 4. 5. 6. 7. 8. 9. 11. 12. 13. 14.
UG UV
FIRE ALARM LEGENDS LEGEND
BOTTOM
FA FACP
GRD
GENERAL SYMBOLS
15. 16. 17. 18. 19.
COMPLY WITH LATEST REQUIREMENTS OF CIVIL DEFENSE DEPARTMENT. ELECTRICALLY OPERATED DOORS (IF ANY) MUST BE INTERFACED WITH FIRE ALARM SYSTEM AND MUST BE KEPT OPEN INCASE OF FIRE. THE CONTRACTOR SHALL BE RESPONSIBLE FOR THE COORDINATION OF ALL SERVICES. THE FAHU's/AHU's SHALL BE INTERFACED WITH FIRE ALARM SYSTEM & SHALL AUTOMATICALLY SWITCH-OFF WHENEVER A SIGNAL IS INITIATED IN THE PANEL. ALL COMMON AREA IN BASEMENT FLOOR MUST BE PROVIDED WITH EMERGENCY LIGHTS. PROVIDE ONE CONTROL MODULE FOR EACH FLOOR AND IN LARGE OPEN AREAS, CONTROL MODULE SHALL BE PROVIDED FOR EVERY 15 DEVICES. ALL OPENING IN FIRE RATED SLABS/WALLS TO BE FILLED WITH SMOKE/FLAME PROOF FIRE BARRIER. MAIN FIRE PANEL NEED TO BE LINKED TO THE CIVIL DEFENSE CENTRAL MONITORING STATION THROUGH A CIVIL DEFENSE APPROVED COMMUNICATION DEVICE WITH MODEM. EMERGENCY LIGHTS SHALL BE NON-MAINTAINED. PULL BOX TO BE PROVIDED IN EVERY 20m. RUN OF CONDUIT AND CHANGE IN DIRECTIONS. EXIT STICKERS MUST BE PROVIDED IN FIRE ESCAPE DOORS, IF EXIT LUMINARIES IS NOT INSTALLED ABOVE THE DOOR. EMERGENCY ILLUMINATION LEVEL MEASURED AT ENGRESS PATH MUST EXCEED 10.8 LUX EMERGENCY ILLUMINATION LEVEL MEASURED SOURCE MUST NOT FALL BELOW 1.0 LUX. ILLUMINATION LEVEL NOT PERMITTED TO DECLINE LESS THAN AN AVERAGE OF 6.5 LUX AT ANY POINT AND NOT LESS THAN .65 LUX AT END OF 120 MINUTES. EXTERNALLY ILLUMINATED SIGNALS SHALL BE MAINTAINED AT LUX NOT LESS THAN 54 LUX. ILLUMINATION FOR SIGNS SHALL BE PERMITTED TO FLASH ON & OFF UPON ACTIVATION OF FIRE ALARM SYSTEM. FIRE ALARM SYSTEM SHALL BE UL/FM OR LPCB APPROVED. FIRE ALARM / DETECTION SYSTEM SHALL BE INSTALLED BY DCD APPROVED FIRE CONTRACTORS. FIRE DEPARTMENT DESIGN APPROVAL MUST BE OBTAINED PRIOR TO INSTALLATION.
ADDRESSABLE CONTROL MODULE FIRE ALARM CONTROL PANEL SELF CONTAINED EMERGENCY LIGHT, NON-MAINTAINED, NON-DECORATIVE TYPE, SURFACE MOUNTED, 8W LED SELF CONTAINED EMERGENCY EXIT LIGHT, MAINTAINED, NON-DECORATIVE TYPE, HANGING TYPE, 3W LED
EOL
END OF LINE RESISTANT
Description
Rev
Date
Checked
Authorized
Rev
Date
Authorized
DRAWING LIST DWG NO. FA-100 FA-101 FA-102 FA-103 FA-104 FA-105 FA-106
DRAWING TITLE ABBREVIATIONS, SYMBOLS AND GENERAL NOTES BASEMENT FLOOR FIRE ALARM & EMERGENCY LIGHTING LAYOUT GROUND FLOOR FIRE ALARM LAYOUT FIRST FLOOR PLAN FIRE ALARM LAYOUT ROOF FLOOR PLAN FIRE ALARM LAYOUT FIRE ALARM SCHEMATIC RISER DIAGRAM FIRE ALARM TYPICAL INSTALLATION DETAILS
Purpose of issue Client:
MR. MOHAMED YASIN FARUQE
Project Title:
PRIVATE VILLA (B+G+1+R) DUBAI HILLS, DUBAI, UAE PLOT NO.: - 6316624 Consultant:
Main Contractor:
Subconsultant/ Subcontractor:
Drawing title:
FIRE ALARM AND EMERGENCY LIGHTING ABBREVIATIONS, LEGENDS AND NOTES Original Scale
Drawn
Checked SP/SJ
NTS
Authorised
Date: AUG-2022
Date:
AUG-2022
Project Number
460-22
Plot Size RK
SP/EL
Date:
AUG-2022
A1
Sheet #
Rev
FA-100
00
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY.
315°
L OT P
L
MI
T
L I
SE
10 11
12
N
06 07 09
NE
45°
P
05
13
135°
04
NW
02 03
225°
01
SW
L OT
I MI T
2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS. 6. ALL SUBMISSIONS AND DRAWINGS ARE FOLLOWING M/S DDA AND M/S EMAAR REGULATIONS. KEYPLAN:
PUMPROOM &H BALANCE TANK
Maneuvering Parking
A1
A B EM EM TV
TOILET
A2
DRIVER'S
S
-3.20
C
SHOW GARAGE 192 m2 -3.15
-3.18
MAID'S 19 m2
ENTRANCE
A3
-3.15
S
D
A SHISH E LOUNG 20 m2
N SUNKE EN GARD
A4
EM MS
A5
E -3.20
KIT
F
Description
Rev
Date
Checked
Authorized
Rev
Date
Authorized
MS -3.20
SERVICE ENTRANCE
G
A6
-3.15 S -3.15
H MECHANICAL H 12 m2
LAUNDRY H 12 m2
G GAMIN M ROO OPEN 26 m2 S
EM
EM 0 WIDE
WATER TANK 12 m2
INDY50
-3.15
Client:
A CINSEM 2 25.0 m
S
WIDE
S
Purpose of issue
INDY50
K
0 INDY50
J
SERVICE ENTRANCE
A7
0 WIDE
ELEC. 6 m2 S
MR. MOHAMED YASIN FARUQE
N SCREE
H
PUMP ROOM & BALANCETANK 13 m2
L
Project Title:
PRIVATE VILLA (B+G+1+R) DUBAI HILLS, DUBAI, UAE PLOT NO.: - 6316624 Consultant:
P
08
L I
MI
L OT
T
MI
P
T
L I Main Contractor:
Subconsultant/ Subcontractor:
Drawing title:
BASEMENT FLOOR PLAN
BASEMENT FLOOR FIRE ALARM AND EMERGENCY LIGHTING LAYOUT Original Scale
Drawn
Checked SP/SJ
1:100
Authorised
Date: AUG-2022
Date:
AUG-2022
Project Number
460-22
Plot Size RK
SP/EL
Date:
AUG-2022
A1
Sheet #
Rev
FA-101
00
L OT
NOTES :-
06 07 09
10 11
12
NE
N
P
05
LOUNGE
13
135°
02 03 SUNKEN 04
JACUZZI
FIRE PLACE
FIRE PIT +0.45
SWIMMING POOL
+0.45
-1.35
225°
01
2. DO NOT SCALE FROM THE DRAWINGS.
SW
45°
L OT
I MI T
SE
NW
P
L
MI
T
L I
1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY.
315°
L OT
3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS. 6. ALL SUBMISSIONS AND DRAWINGS ARE FOLLOWING M/S DDA AND M/S EMAAR REGULATIONS.
+0.40
-0.20
KEYPLAN:
+0.20
+0.35
+0.35
-0.20
OUTDOOR LIVING 57.0 m2
A
A1
COUNTER
B
+0.40
-3.20
-0.20
BBQ
A2
C +0.35
OPEN TO SKY
OPEN FA DETECTOR TO @ DOUBLE HEIGHT AREA ABOVE
SHOW KITCHEN MS 30.0 m2
S
LIVING
2 55.0 m
A3
S TV
D
n Sunke n e d r a G
TOILET 4.30 m2 +0.40
BANQUETING AREA 6.20m2
DINING 37.0 m2
A4
A5
S
E
S SUITE S E GU T 2 26.0 m
FA DETECTOR @ DOUBLE HEIGHT AREA
F
H
OPEN TO SKY
H
Description
Rev
Date
Checked
Authorized
Rev
Date
Authorized
REFLECTIVE POOL
S
CHEF'S KITCHEN 14.40 m2
G
-3.20
S
A6
H
FACP
H S
+0.45
+0.45
AUTO DIALER CONNECTED TO C.D-24x7
J PANTRY
CONCEALED JN. BOX (30x30x15cm) IN WEATHER PROOF ENCLOSURE.
K
H
TOILET 8.50 m2
+0.35
FOYER FA DETECTOR 14.0 m2 @ DOUBLE
SUITE GUEST 2 m .0 8 2
HEIGHT AREA
+0.40
Client:
UITE S MS GUEST 2 30.0 m REFLECTIVE POOL
MAIN ENTRANCE
Purpose of issue
S
A7
MR. MOHAMED YASIN FARUQE
+0.40
-0.20
L
Project Title: +0.35
CONCEALED JN. BOX (30x30x15cm) IN WEATHER PROOF ENCLOSURE.
PRIVATE VILLA (B+G+1+R) DUBAI HILLS, DUBAI, UAE PLOT NO.: - 6316624
+0.35
GARBA GE ELECT. RM RM. +H 7.66 UTILITY FFL ROOM+7.66
S
FFL
+0.35
MI
0.00
0.00 +0.05
T
P 0.00
ETER
MI
LPG M
L I
L I
L OT
-0.05
Consultant:
08
P
T
L OT
GATE LEVEL 50mmØ UPVC AT 600mm LEVEL BELOW GROUND FLOOR, FOR INTERFACING FACP TO INFRASTRUCTURE BY FIBRE CABLE.
0.00
Main Contractor:
DRIVEWAY
Subconsultant/ Subcontractor:
ROAD
Drawing title:
GROUND FLOOR PLAN
GROUND FLOOR FIRE ALARM LAYOUT Original Scale
Drawn
Checked SP/SJ
1:100
Authorised
Date: AUG-2022
Date:
AUG-2022
Project Number
460-22
Plot Size RK
SP/EL
Date:
AUG-2022
A1
Sheet #
Rev
FA-102
00
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY.
315°
NE
N
NW
135°
02 03
04
05
06 07 09
10 11
12
13
225°
01
2. DO NOT SCALE FROM THE DRAWINGS.
SW
45°
SE
3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS. 6. ALL SUBMISSIONS AND DRAWINGS ARE FOLLOWING M/S DDA AND M/S EMAAR REGULATIONS. KEYPLAN:
edge of canopy
edge of canopy
A1
Semi-Covered Balcony 11 m2 +4.80
A B
limit of pergola TERRACE 30 m2
A2 FAMILY ROOM S 24.0 m2
C Master 42.0 m2
OPEN TO SKY OPEN TO SKY
open to sky
open to below
A3 MS
S +4.85
D
MS SUITE GUEST 2 27.0 m
A4
A5 open to below S
E F
Description
Rev
OPEN TO SKY
Date
Checked
Authorized
Rev
Date
Authorized
SUITE GUEST 2 .0 28 m
REFLECTIVE POOL
MS
G
A6
H MS
+4.85
J
open to sky
Purpose of issue Master 42.0 m2
open to S below
Client:
K MS
MR. MOHAMED YASIN FARUQE
Master 2 42.0 m
A7
REFLECTIVE POOL OPEN TO SKY BALCONY 5 m2 edge of canopy
alcony
dB Covere
5 m2
Project Title:
PRIVATE VILLA (B+G+1+R) DUBAI HILLS, DUBAI, UAE PLOT NO.: - 6316624
L edge of canopy
Consultant:
08
Main Contractor:
Subconsultant/ Subcontractor:
Drawing title:
FIRST FLOOR FIRE ALARM LAYOUT
FIRST FLOOR PLAN
Original Scale
Drawn
Checked SP/SJ
1:100
Authorised
Date: AUG-2022
Date:
AUG-2022
Plot Size RK
SP/EL
Date:
AUG-2022
Sheet #
Project Number
460-22
FA-103
A1 Rev
00
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY.
315°
NE
225°
NW
N
2. DO NOT SCALE FROM THE DRAWINGS.
SW
45°
SE
3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
135°
6. ALL SUBMISSIONS AND DRAWINGS ARE FOLLOWING M/S DDA AND M/S EMAAR REGULATIONS. KEYPLAN:
01
02 03
04
05
06 07 09
10 11
12
13
A1
CANOPY
A B
A2 FIRE PIT
C
+8.60
OPEN TO SKY OPEN TO SKY
ROOF LOUNGE 42m2 +9.20
A3 Jacuzzi 6 m2
+8.90
Description
Rev
D
Date
Checked
Authorized
Rev
Date
Authorized
A4 CM
FOR LIFT INTERFACING
A5 2
m
00 BBQ 2
E +8.65
F
OPEN TO SKY SERVICE AREA
REFLECTIVE POOL
+8.60
Purpose of issue Client:
S
G
A6
MR. MOHAMED YASIN FARUQE
+8.60
H
J
Project Title:
K
A E ARE SERVIC +8.60 REFLECTIVE POOL
PRIVATE VILLA (B+G+1+R) DUBAI HILLS, DUBAI, UAE PLOT NO.: - 6316624
A7 Consultant:
+9.45
L ENTRY FRAME
+8.25
CANOPY
Main Contractor:
08
ROOF FLOOR PLAN
Subconsultant/ Subcontractor:
Drawing title:
ROOF FLOOR FIRE ALARM LAYOUT Original Scale
Drawn
Checked SP/SJ
1:100
Authorised
Date: AUG-2022
Date:
AUG-2022
Project Number
460-22
Plot Size RK
SP/EL
Date:
AUG-2022
A1
Sheet #
Rev
FA-104
00
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY.
315°
NE
N
1NO
1NO
S
MS
4NOS
5NOS
135°
S
NW
CM
225°
FOR LIFT INTERFACING
2. DO NOT SCALE FROM THE DRAWINGS.
SW
45°
SE
3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS. 6. ALL SUBMISSIONS AND DRAWINGS ARE FOLLOWING M/S DDA AND M/S EMAAR REGULATIONS.
1NO
1NO
KEYPLAN:
ROOF FLOOR
1NO
1NO
FIRST FLOOR SPARE LOOP
LOOP-1 IN
2 LOOP ADDRESSABLE FIRE ALARM CONTROL PANEL WITH FIBRE OPTIC NETWORK CARD TO CENTRAL FIRE COMMAND CENTRE VIA INFRASTRUCTURE DUCTS 4CORE FIBRE OPTIC CABLE FOR VILLAS. SIZE TO BE CONFIRMED BY INFRASTRUCTURE CONSULTANT AND MANUFACTURER
2x2.5mm2 LSOH FIRE RESISTANT CABLES Description
Rev
Date
Checked
Authorized
Rev
Date
Authorized
LOOP-1 OUT FIBRE OPTIC NETWORK CARD
FACP
S
S
H
MS MS
6NOS
2NOS
5NOS
1NO
1NO
3NOS
3NOS
2NOS
3NOS Purpose of issue Client:
MR. MOHAMED YASIN FARUQE
DCD 24x7 PANEL INTERFACED TO FACP
2x2.5mm2 LSOH FIRE RESISTANT CABLES
230AV AC, 1-ph POWER SUPPLY
Project Title:
PRIVATE VILLA (B+G+1+R) DUBAI HILLS, DUBAI, UAE PLOT NO.: - 6316624
GROUND FLOOR Consultant:
S
S
H
MS
MS
7NOS
1NOS
4NOS
1NO
1NO
Main Contractor:
1NOS
2NOS
2NOS
2NOS
Subconsultant/ Subcontractor:
BASEMENT FLOOR
FIRE ALARM RISER DIAGRAM (TYPICAL)
Drawing title:
FIRE ALARM SCHEMATIC RISER DIAGRAM Original Scale
Drawn
Checked SP/SJ
NTS
Authorised
Date: AUG-2022
Date:
AUG-2022
Project Number
460-22
Plot Size RK
SP/EL
Date:
AUG-2022
A1
Sheet #
Rev
FA-105
00
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY.
315°
NE
225°
NW
N
2. DO NOT SCALE FROM THE DRAWINGS.
SW
45°
SE
3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
135°
6. ALL SUBMISSIONS AND DRAWINGS ARE FOLLOWING M/S DDA AND M/S EMAAR REGULATIONS. KEYPLAN:
30mmØ PVC SURFACE MOUNTED
CONDUIT COPLING
THROUGH WAY JUNCTION BOX 24/7 LINK FIRE DETECTION DEVICE
FIRE DETECTION DEVICE
20mmØ PVC
25mmØPVC CONCEALED CONDUIT
CONDUIT COPLING
25mmØPVC CONCEALED CONDUIT
13A SOCKET FOR FACP SUPPLY
2C 1.5 sq mm FIRE PROOF CABLE
2C 1.5 sq mm FIRE PROOF CABLE
FROM EM/DEDICATED CIRCUIT
SHALL BE AS PER MANUFACTURER'S TECHNICAL DETAIL SHEET
FIRE ALARM PANEL
25mmØ FLEXIBLE
25mmØ FLEXIBLE
PVC CONDUIT
PVC CONDUIT
2 x 2C 1.5 sq mm
2 x 2C 1.5 sq mm
FIRE PROOF CABLE
FIRE PROOF CABLE
FIRE PROOF PVC ADAPTOR FLOOR LEVEL FALSE CEILING FIRE DETECTION DEVICE
FIRE DETECTION DEVICE
FFL
SHALLBE AS PER MANUFACTURER'S TECHNICAL DETAIL SHEET
1
TYPICAL MOUNTING DETAIL WITH CONCEALED CONDUITS (WHERE FALSE CEILING NOT APPLICABLE) NTS.
2
FIRE ALARM PANEL MOUNTING DETAIL NTS.
3
TYPICAL MOUNTING DETAIL OF DETECTORS (WHERE FALSE CEILING IS APPLICABLE) NTS.
Description
Rev
Purpose of issue
EMERGENCY LIGHT 25mmØPVC CONCEALED CONDUIT
25mmMETALIC FLEXIBLE CONDUIT
2 x 2C 1.5 sq mm
SHALL BE AS PER MANUFACTURER'S
FIRE PROOF CABLE
TECHNICAL DETAIL SHEET
(TYPE OF CONDUIT DEPEND ON LOCATION)
HANGING TYPE SHALL BE AS PER MANUFACTURER'S
MALE BUSH
Authorized
PRIVATE VILLA (B+G+1+R) DUBAI HILLS, DUBAI, UAE PLOT NO.: - 6316624
WITH FLAT COVER (70mm X 70mm) BLOCK WALL
Date
Project Title:
TECHNICAL DETAIL SHEET
PVC CIRCULAR BOX IN CONCRETE (RIGID UPVC CONDUIT FOR EMBEDDED)
Rev
MR. MOHAMED YASIN FARUQE
SHALL BE AS PER MANUFACTURER'S
FALSE CEILING
25mmØ UPVC CONDUIT
Authorized
Client:
2C 1.5 sq mm FIRE PROOF CABLE CONDUIT TYPE
Checked
25mmØPVC CONCEALED CONDUIT
GI THREADED ROD
2C 1.5 sq mm FIRE PROOF CABLE
Date
EMERGENCY LIGHT Consultant:
TECHNICAL DETAIL SHEET
BACK BOX
FLOOR LEVEL
Main Contractor:
BREAK GLASS FLOOR LEVEL
MANUAL PULL STATION SHALL BE INSTELLED NOT LES THEN 1000mm OR MORE THEN 1200mm FROM FINISH FLOOR TO BOTTOM OF DEVICE.
1
WITH IN 1500MM AT STAIRE WAY OR AN EXIT DOOR. FFL
MCP FIXING DETAILS
4 NTS.
SURFACE HANGING TYPE EMERGENCY LIGHT INSTALLATION CONCEALED CONDUITS (WHERE FALSE CEILING IS AVAILABLE) NTS.
2
SURFACE MOUNTED EMERGENCY LIGHT INSTALLATION CONCEALED CONDUITS (WHERE FALSE CEILING NOT APPLICABLE) NTS.
Subconsultant/ Subcontractor:
Drawing title:
FIRE ALARM & EMERGENCY LIGHT TYPICAL INSTALLATION DETAILS Original Scale
Drawn
Checked SP/SJ
NTS
Authorised
Date: AUG-2022
Date:
AUG-2022
Project Number
460-22
Plot Size RK
SP/EL
Date:
AUG-2022
A1
Sheet #
Rev
FA-106
00
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY.
315°
NE
225°
NW
N
2. DO NOT SCALE FROM THE DRAWINGS.
SW
45°
SE
3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
135°
6. ALL SUBMISSIONS AND DRAWINGS ARE FOLLOWING M/S DDA AND M/S EMAAR REGULATIONS. KEYPLAN:
ABBREVIATIONS A A/C AC ACB ADJ AF AFF AHU AL ALT ARCH ATS AUTO AVG
BC BTM
C CAP CB CCU CH CHF CHWP CLG CONG CONN CONT COS CP CPU CRT CSP CT CU
AMPS AIR CONDITIONING ALTERNATING CURRENT AIR CIRCUIT BREAKER ADJUSTABLE AMPERE FRAME SIZE AFTER FINISHED FLOOR AIR HANDLING UNIT ALUMINIUM ALTERNATE ARCHITECTURAL AUTOMATIC TRANSFER SWITCH AUTOMATIC AVERAGE
BUS COUPLER BOTTOM
CONDUIT CAPACITOR BANK CIRCUIT BREAKER CENTRAL COOKER UNIT CHANDELIER COOKER HOOD EXTRACT FAN CHILLED WATER PUMP CEILING CONCRETE CONNECTION CONTINUOUS CHANGE OVER SWITCH CONTROL PANEL CENTRAL PROCESSING UNIT CATHODE RAY TUBE CEILING SPEAKER CURRENT TRANSFORMER COPPER
GENERAL SYMBOLS
kW kVA
KILOWATT KILOVOLT AMPERE
L/L LSF LSOH LTG LV LVP LVR
LOW LEVEL LOW SMOKE AND FLAME LOW SMOKE ZERO HALOGEN LIGHTING LOW VOLTAGE LOW VOLTAGE PANEL LOUVER
GENERAL SYMBOLS xx
M M/C MAX MCB MCC MCCB MD MDB MECH MET MFR MH MIN MIR MISC MM² MO MTD MV
NO NOM NTS
METER MULTI CORE CABLE MAXIMUM MINIATURE CIRCUIT BREAKER MOTOR CONTROL CENTER MOULDED CASE CIRCUIT BREAKER MAXIMUM DEMAND MAIN DISTRIBUTION BOARD MECHANICAL MAIN EARTHING TERMINAL MANUFACTURER MANHOLE MINIMUM MIRROR LIGHT MISCELLANEOUS SQUARE MILLIMETER MOTORIZED MOUNTED MEDIUM VOLTAGE
NUMBER NOMINAL NOT TO SCALE
SINGLE LINE DIAGRAM AIR CIRCUIT BREAKER
ELECTRICAL EQUIPMENT INDICATOR
xx
SCHEDULED ITEM INDICATOR
X
DRAWING REVISION INDICATOR
X x
MECHANICAL EQUIPMENT INDICATOR
X x
DETAIL INDICATOR
X x
LEGENDS FOR LIGHTING DESCRIPTION
SYMBOLS
KEY NOTE INDICATOR
XX
GENERAL NOTES
AIR CIRCUIT BREAKER (DRAW OUT TYPE) MOULDED CASE CIRCUIT BREAKER
MINIATURE CIRCUIT BREAKER
ELEVATION/SECTION INDICATOR
EARTH LEAKAGE CIRCUIT BREAKER
BUS COUPLER
A
LED Outdoor Light IP65 Glass Diffuser, Aluminum Body With Aluminum Reflector, with pole, Including LED Driver for external driveway ramp. 100W
B
Recessed Downlight Bath/Toilet 11W IP-44, CCT: 4000°K, CRI:≥ 90, Lifetime: 50,000 hours L70 at 25°C, Warranty: 5 yrs, 680lm
C
Directional Magnetic Trimless Track Light LED 9 W/M
D
Recessed Trimless Spot Light, Circular, LED with Driver, 3000K, 1200lm, 10W
E
Recessed Trimless Directional Spot Light, Circular, LED with Driver, 3000K, 1200lm 12 W
F
Wall/Surface mounted LED Lighting Fixture, Round Vardal Type, 20W, IP65, Metal Enclosure, CCT:3000°K.
G
LED Light Fixture, IP68 Die Cast Aluminum Housing with high corrosion resistance, Aluminum Reflector, tempered glass, fire-resistant silicon seal gasket, polycarbonate pre-buried bucket, outdoor electrostatic powder painting, optical level PMMA lens, standard stainless steel frame and fastness part, Including LED Driver. Must be supplied at a maximum voltage of 12V AC or 30V DC for Underwater use.
H
Wall Mounted LED Lighting Fixture, 20W, IP65, Metal Enclosure, CCT:3000°K.
I
Decorative Type Wall Mounted LED Lighting Fixture, 12W, IP44, Metal Enclosure.
J
Surafce Mounted LED Lighting Fixture, 32W, IP66, CCT:4000°K, Warranty: 5 yrs.
100mA EARTH LEAKAGE SHUNT TRIP
300mA EARTH LEAKAGE SHUNT TRIP
K
Surafce Mounted LED Lighting Fixture, 22W, IP66, CCT: 4000°K, Warranty: 5 yrs.
L
LED Mirror Light with Safety Glass Diffuser, 18W, IP54, CCT:4000°K, Warranty: 5 yrs.
M
Pendent LED Luminaries with 3 wings, 3x18W, IP44, CCT:3000°K
N
Floor mounted LED Light Fixture, 10W, IP65, Metal Enclosure, CCT:3000°K.
O
IP 65 Floor Mounted LED Uplight Fixture, Die Cast Aluminum Body Aluminum Reflector Glass Diffuser, Including LED Driver. 12W
P
Pendent LED Luminaries with 3 wings, 3x9W, IP44, CCT:4000°K
500mA EARTH LEAKAGE SHUNT TRIP
EARTH LEAKAGE + RELAY SENSOR AND ALARM ( 300mA)
A
DM
BUS BAR RISER ( RATING AS INDICATED )
Q
LED Hidden Light Strip, CCT: 3000°K. 9 W/M
CURRENT TRANSFORMER
R
16.5W Dimmable LED Track Lighting Heads Compatible with Single Circuit H Type Rail Ceiling Spotlight for Accent Task Wall Art Exhibition Lighting 90 CRI 24° Black (3000K Warm White)
DIGITAL METER
S
15W Bollard LED Light For Garden Lighting, IP-67
T
10W Boundary Wall LED Light, IP-67
AUTOMATIC TRANSFER SWITCH
DOOR BELL
ISOLATOR - 1P / 3P DB DED DEWA DF DIC DN DO DWG
EB ECC ELCB ELEC ELR ELS EM EMGEN ENCL EP ESMDB ETP EWC EXH EXP
FA FACP FB FCU FIN FIXT FL FLD FLR FP FTN FU
G/Y GI GL GRD
HGT HIAL H/L HP HV Hz
INST INSUL ISO
JB
DISTRIBUTION BOARD DEDICATED DUBAI ELECTRICITY AND WATER AUTHORITY DIVERSITY FACTOR DUBAI INTERNET CITY DOWN DUAL OUTLET DRAWING
ELECTRIC BELL EARTH CONTINUITY CONDUCTOR EARTH LEAKAGE CIRCUIT BREAKER ELECTRICAL EARTH LEAKAGE RELAY EARTH LEAKAGE SENSOR EMERGENCY ONLY ESSENTIAL SERVICE EMERGENCY GENERATOR-SAFETY SERVICE SOURCE ENCLOSURE ELECTRIC PNEUMATIC EMERGENCY SUB MAIN DISTRIBUTION BOARD ENERGY TRANSFER PUMP ELECTRIC WATER COOLER EXHAUST EXPLOSION PROOF
FIRE ALARM FIRE ALARM CONTROL PANEL FLOOR BOX FAN COIL UNIT FINISH FIXTURE FLUORESCENT FLOOD LIGHT FLOOR FIRE PROTECTION FOUNTAIN FUSE
GREEN AND YELLOW GALVANIZED CONDUIT GROUND LIGHT GROUND
HEIGHT HIGH INTENSITY AIRCRAFT WARNING LIGHT HIGH LEVEL HORSE POWER HIGH VOLTAGE HERTZ
INSTANTANEOUS INSULATION ISOLATION SWITCH
OH OPNG
ONE WAY, ONE GANG LIGHTING SWITCH. (W.P-WEATHER PROOF)
OVERHEAD OPENING
ONE WAY, TWO GANG LIGHTING SWITCH. (W.P-WEATHER PROOF)
SWITCH DISCONNECTOR - 1P / 3P ONE WAY, THREE GANG LIGHTING SWITCH, (W.P-WEATHER PROOF)
PB PE PEND PF PH PR SW PS PTs PVC
PUSH BUTTON PNEUMATIC ELECTRIC PENDANT POWER FACTOR PENTHOUSE PRESSURE SWITCH PULL SWITCH POTENTIAL TRANSFORMERS POLYVINYL CHLORIDE
R-Y-B RCCB RCD RM
RED-YELLOW-BLUE RESIDUAL CURRENT CIRCUIT BREAKER RESIDUAL CURRENT DEVICE ROOM
S/C S/O S/S SECT SMDB SMR SQ² SP SPN STD STL STOR STRUCT SURF SUSP SW SWA
SINGLE CORE CABLE SOCKET OUTLET SUBSTATION SECTION SUB MAIN DISTRIBUTION BOARD SURFACE METAL RACEWAY SQUARE METER SINGLE POLE / PHASE SINGLE POLE & NEUTRAL STANDARD STEEL STORAGE STRUCTURAL SURFACE SUSPENDED SWITCH STEEL WIRE ARMOUR
TEL TEMP TERM TP TPN
TELEPHONE TEMPERATURE TERMINAL THREE PHASE / TRIPLE POLE TRIPLE POLE & NEUTRAL - OR THREE PHASE & NEUTRAL TRANSFORMER TELEVISION TYPICAL
UG UV
UNDER GROUND UNIT VENTILATOR
VDT
VISUAL DISPLAY TERMINAL
WP
WEATHER PROOF
XLPE
CROSS LINKED POLYETHYLENE
WORK SHALL BE INSTALLED IN ACCORDANCE WITH THE IEE WIRING REGULATIONS, BRITISH STANDARDS BS7671 AND ALL RULES AND REGULATIONS OF DEWA, ETISALAT AND CIVIL DEFENSE. 2. WORK SHALL MEET THE APPROVAL OF THE CONSULTANT/ OWNER. 3. WIRES SMALLER THAN 2.5mm² SHALL NOT BE USED FOR LIGHTING OR POWER CIRCUITS. 4. MINIMUM CONDUIT SIZE SHALL BE 20mm. 5. EQUIPMENT SHALL COMPLY WITH ALL STANDARDS AS REQUIRED BY DEWA AND CONFIRM TO RELEVANT IEC (INTERNATIONAL ELECTROTECHNICAL COMMISSION) AND ( ISO INTERNATIONAL STANDARDS ORGANIZATION ) RECOMMENDATIONS.. ALL EQUIPMENTS TO BE EARTHED AND BONED IN ACCORDANCE WITH THE IEE WIRING REGULATIONS. 6. DELIVERY OF DBs, LIGHT FIXTURES, etc. TO MEET THE CONSTRUCTION SCHEDULE SHALL BE THE RESPONSIBILITY OF THE ELECTRICAL CONTRACTOR. 7. THE FEEDER ROUTING INDICATED ON THE DRAWINGS IS DIAGRAMMATIC ONLY THE ROUTING SHALL BE FIELD VERIFIED AND COORDINATED AT THE TIME OF OTHER TRADES. 8. VERIFY THE VOLTAGE REQUIREMENT FOR ALL APPLIANCES WITH THE CONSULTANT. 9. THE USE OF APPROVED TYPE EXPANSION FITTINGS SHALL BE REQUIRED ON ALL THE RACEWAYS WHICH CROSS ANY BUILDING EXPANSION JOINTS. 10. EACH DESIGNATED CIRCUIT HOMERUN SERVING SOCKETS SHALL HAVE ITS OWN INDIVIDUAL FULL SIZE NEUTRAL BACK TO PANEL. 11. COORDINATE ELEVATION AND LOCATION OF ELECTRICAL WITH ARCHITECTURAL DRAWINGS PRIOR TO INSTALLATION. 12. VERIFY SMR LOCATIONS IN REFERENCE TO CASE WORK LOCATIONS. PROVIDE RISER DUCTS AS REQUIRED WHEN SMR ELEVATION CHANGES AS WELL AS FACTORY ELBOWS AND MISCELLANEOUS END PLATES. 13. PROVIDE MINIMUM 2 POINT SUPPORT FROM STRUCTURE TO LIGHTING FIXTURES. 600mmx600mm PENDANT FIXTURES SHALL HAVE 4- POINT SUPPORT ON STRUCTURE. 14. SMR TO BE ATTACHED TO WALL WITH PLUGS AND SCREWS. TAP CONS ARE NOT ACCEPTABLE. 15. PROVIDE PLASTER FLANGES FOR RECESSED LIGHTING FIXTURES IN DRY WALL OR PLASTER CEILINGS. COORDINATE CEILING TYPES WITH ARCHITECTURAL REFLECTED CEILING PLANS. 16. CEILING MOUNTED ELECTRICAL DEVICES SHALL BE MOUNTED IN THE CENTER OF THE CEILING TILES UNLESS OR AS PER APPROVAL. 17. MAINTAIN ACCESS TO ALL COMMUNICATIONS RACEWAYS ABOVE LAY-IN CEILINGS. 18. COORDINATE FOR EXACT LOCATION OF HVAC EQUIPMENT. MAINTAIN ACCESSIBILITY TO HVAC CONTROLS. 19. BALANCE DISTRIBUTION PANEL PHASES ONCE USER EQUIPMENT IS INSTALLED AND OPERATIONAL. 20. WHERE NO SHORT CIRCUIT INTERRUPT / WITHSTAND RATING IS INDICATED, DEVICES OR EQUIPMENT SHALL BE RATED THE SAME AS THE NEAREST UPSTREAM DEVICE. IF THERE IS A CONFLICT BETWEEN THE DRAWINGS AND THE SPECIFICATIONS, PROVIDE THE HIGHEST RATING SPECIFIED OR SHOWN.
21. ENERGY EFFICIENT HIGH PERFORMANCE LAMPS SUCH AS COMPACT FLUORESCENT LAMP (CFL) AND LIGHT EMITTING DIODES (LEDs) WILL BE USED. 22. ONLY ELECTRONIC LIGHTING BALLAST WILL BE USED . 23. ALL THERMOSTAT FOR AIR CONDITIONING SHOULD BE FITTED WITH BASIC TIMER CONTROLS. 24. PHOTOCELL SENSORS FOR THE CONTROL OF EXTERNAL LIGHTS WILL BE USED. 25. MOTION CONTROL DEVICE OR OCCUPANCY SENSOR FOR THE CONTROL OF INTERNAL LIGHTS WILL BE USED. 26. SWITCHING & CONTROLLING OF BATHROOM EXTRACT FANS THROUGH THE LIGHT SWITCH/TIMERS/SENSORS
DRAWING TITLE ABBREVIATIONS, LEGEND SYMBOLS AND NOTES SETTINGOUT PLAN LIGHTING LAYOUT BASEMENT FLOOR PLAN LIGHTING LAYOUT
EL-102
GROUND FLOOR PLAN LIGHTING LAYOUT
EL-103 EL-104
FIRST FLOOR PLAN LIGHTING LAYOUT ROOF FLOOR PLAN LIGHTING LAYOUT
EP-100 EP-101 EP-102 EP-103 EP-104 EP-105
SETTINGOUT PLAN POWER LAYOUT BASEMENT FLOOR PLAN POWER LAYOUT GROUND FLOOR PLAN POWER LAYOUT FIRST FLOOR PLAN POWER LAYOUT ROOF FLOOR PLAN POWER LAYOUT SINGLE LINE DIAGRAM POWER LAYOUT
Description
Rev
Date
Checked
Authorized
Rev
Date
Authorized
TWO WAY, ONE GANG LIGHTING SWITCH. (W.P-WEATHER PROOF)
CONTACTOR - 1P / 3P
TWO WAY, TWO GANG LIGHTING SWITCH. (W.P-WEATHER PROOF) T
TRANSFORMER
TIMER SWITCH PB
DOOR BELL PUSH BUTTON SWITCH - W/P
G
~
AC GENERATOR
COS
CHANGE OVER SWITCH
CP
CONTROL PANEL
~
M
AC MOTOR
AHF
ACTIVE HARMONIC FILTER
PFC
POWER FACTOR CAPACITOR
M
MOTION SENSOR-OCCUPANCY SENSOR (MICORPROCESSOR BASED)
S
SHAVER SOCKET @ 1.25m FROM FFL
NOTE:* ALL LIGHTING FIXTURES TO BE LED TYPE * ALL EXTERNAL LIGHTING TO BE CONTROLLED BY TIMER+PHOTOCELL+CONTACTOR
Purpose of issue Client:
CAPACITOR BANK LOCK-OFF STOP BUTTON M
kWh METER (DIRECT READING TYPE)
kWHr
kWh METER (CT OPERATED TYPE)
MR. MOHAMED YASIN FARUQE
MAIN DISTRIBUTION BOARD SUB MAIN DISTRIBUTION BOARD DISTRIBUTION BOARD MCC
MOTOR CONTROL CENTER
GRA
GENERATOR REMOTE ANNUNCIATOR
VFD
VARIABLE FREQUENCY DRIVE
PF
TR TV TYP
1.
DRAWING LIST DWG NO. EE-100 EL-100 EL-101
Project Title:
PRIVATE VILLA (B+G+1+R) DUBAI HILLS, DUBAI, UAE PLOT NO.: - 6316624
JC
POWER FACTOR METER STAR/DELTA STARTER
DOL
DIRECT ONLINE STARTER
OC SC EF
OVER CURRENT, SHORT CIRCUIT & EARTH FAULT INDICATOR
A A A
AMMETERS WITH CT
R Y B
PHASE INDICATORS
SS
SELECTOR SWITCH AND VOLTMETERS
V
Consultant:
INDICATOR LAMP (RUN /STOP/TRIP)
Main Contractor:
JUNCTION BOX
Subconsultant/ Subcontractor:
Drawing title:
ABBREVIATIONS, SYMBOLS AND GENERAL NOTES Original Scale
Drawn
Checked SP/SJ
1:100
Authorised
Date: AUG-2022
Date:
AUG-2022
Project Number
460-22
Plot Size RK
SP/EL
Date:
AUG-2022
A1
Sheet #
Rev
EE-100
00
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY.
315°
NE
225°
NW
N
3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
135°
P
L
MI
L OT
T
L I
2. DO NOT SCALE FROM THE DRAWINGS.
SW
45°
SE
L OT
I MI T
6. ALL SUBMISSIONS AND DRAWINGS ARE FOLLOWING M/S DDA AND M/S EMAAR REGULATIONS.
P
KEYPLAN: Y2/DB-EX
01
LEGENDS FOR LIGHTING
02 03 SUNKEN 04
05
LOUNGE
06 07 09 JACUZZI
10 11
FIRE PLACE
FIRE PIT +0.45
12
13
SYMBOLS
SWIMMING POOL Swimming Pool Lighting by Swimming Pool Specialist. Swimming pool power considered -1.35 in Basement Floor Power Drawing (Isolator)
+0.45
-0.20
+0.20
+0.35
OUTDOOR LIVING 57.0 m2
A1
COUNTER
B
+0.40
T/B
-0.20
BBQ
LED Outdoor Light IP65 Glass Diffuser, Aluminum Body With Aluminum Reflector, with pole, Including LED Driver for external driveway ramp. 100W
B
Recessed Downlight Bath/Toilet 11W IP-44, CCT: 4000°K, CRI:≥ 90, Lifetime: 50,000 hours L70 at 25°C, Warranty: 5 yrs, 680lm
C
Directional Magnetic Trimless Track Light LED 9 W/M
D
Recessed Trimless Spot Light, Circular, LED with Driver, 3000K, 1200lm, 10W
E
Recessed Trimless Directional Spot Light, Circular, LED with Driver, 3000K, 1200lm 12 W
F
Wall/Surface mounted LED Lighting Fixture, Round Vardal Type, 20W, IP65, Metal Enclosure, CCT:3000°K.
G
LED Light Fixture, IP68 Die Cast Aluminum Housing with high corrosion resistance, Aluminum Reflector, tempered glass, fire-resistant silicon seal gasket, polycarbonate pre-buried bucket, outdoor electrostatic powder painting, optical level PMMA lens, standard stainless steel frame and fastness part, Including LED Driver. Must be supplied at a maximum voltage of 12V AC or 30V DC for Underwater use.
H
Wall Mounted LED Lighting Fixture, 20W, IP65, Metal Enclosure, CCT:3000°K.
I
Decorative Type Wall Mounted LED Lighting Fixture, 12W, IP44, Metal Enclosure.
J
Surafce Mounted LED Lighting Fixture, 32W, IP66, CCT:4000°K, Warranty: 5 yrs.
K
Surafce Mounted LED Lighting Fixture, 22W, IP66, CCT: 4000°K, Warranty: 5 yrs.
L
LED Mirror Light with Safety Glass Diffuser, 18W, IP54, CCT:4000°K, Warranty: 5 yrs.
M
Pendent LED Luminaries with 3 wings, 3x18W, IP44, CCT:3000°K
N
Floor mounted LED Light Fixture, 10W, IP65, Metal Enclosure, CCT:3000°K.
O
IP 65 Floor Mounted LED Uplight Fixture, Die Cast Aluminum Body Aluminum Reflector Glass Diffuser, Including LED Driver. 12W
P
Pendent LED Luminaries with 3 wings, 3x9W, IP44, CCT:4000°K
Q
LED Hidden Light Strip, CCT: 3000°K. 9 W/M
R
16.5W Dimmable LED Track Lighting Heads Compatible with Single Circuit H Type Rail Ceiling Spotlight for Accent Task Wall Art Exhibition Lighting 90 CRI 24° Black (3000K Warm White)
S
15W Bollard LED Light For Garden Lighting, IP-67
T
10W Boundary Wall LED Light, IP-67
+0.35
-0.20
R7/DB-GF
A
A +0.40
From Jacuzzi Isolator
-3.20
A2
DESCRIPTION
W/P
C
R6/DB-GF
+0.35
OPEN TO SKY
OPEN Refer First Floor TOPlan for the Lighting in Double Height Area ABOVE
SHOW KITCHEN 30.0 m2
R3/DB-GF
LIVING
55.0 m
2
A3
B3/DB-GF Y3/DB-GF
TV
Y2/DB-GF
D
n Sunke n e d Gar
DINING 37.0 m2 BANQUETING AREA 6.20m2
TOILET 4.30 m2 Y4/DB-GF
+0.40
E
A5 SUITE GUEST 2 26.0 m
B6/DB-GF R5/DB-GF
Refer First Floor Plan for the Lighting in Double Height Area
F
Rev
Date
Authorized
ONE WAY, TWO GANG LIGHTING SWITCH. (W.P-WEATHER PROOF)
Purpose of issue
B1/DB-GF R2/DB-GF
ONE WAY, THREE GANG LIGHTING SWITCH, (W.P-WEATHER PROOF) S
Client:
A6
TWO WAY, ONE GANG LIGHTING SWITCH. (W.P-WEATHER PROOF)
T/B
MR. MOHAMED YASIN FARUQE
TWO WAY, TWO GANG LIGHTING SWITCH. (W.P-WEATHER PROOF)
R1/DB-GF
+0.45
+0.45
Authorized
ONE WAY, ONE GANG LIGHTING SWITCH. (W.P-WEATHER PROOF)
T/B
B5/DB-GF
Checked
-3.20 S
H
Date
DOOR BELL
OPEN TO SKY REFLECTIVE POOL
CHEF'S KITCHEN 14.40 m2
G
A4
Description
Rev
T
TIMER SWITCH Y1/DB-GF
J PANTRY
K
TOILET 8.50 m2
+0.35
FOYER 14.0 m2 Refer First Floor Plan for the Lighting in Double Height Area
PB
DOOR BELL PUSH BUTTON SWITCH - W/P
SUITE GUEST 2 28.0 m
MOTION SENSOR-OCCUPANCY SENSOR (MICORPROCESSOR BASED)
S
SHAVER SOCKET @ 1.25m FROM FFL
PRIVATE VILLA (B+G+1+R) DUBAI HILLS, DUBAI, UAE PLOT NO.: - 6316624
S
+0.40
Project Title: M
SUITE GUEST 2 30.0 m
REFLECTIVE POOL
MAIN ENTRANCE
A7 NOTE:* ALL LIGHTING FIXTURES TO BE LED TYPE * ALL EXTERNAL LIGHTING TO BE CONTROLLED BY TIMER+PHOTOCELL+CONTACTOR
+0.40
Consultant:
-0.20
L
+0.35
+0.35 GARBA GE ELECT. RM RM. +7.66 UTILITY FFL ROOM+7.66
FFL
+0.35
L OT
MI
Main Contractor:
08
-0.05
P
Landscape Lighting by Landscape Specialist. Landscape pool power considered in External Electrical Room Power Drawing (Isolator)
T W/P
0.00
0.00 +0.05
X LPG M ETE
T
R1/DB -E
R2/DB-EX
0.00
R
P
L OT
GATE LEVEL
MI
Y1/DB -EX
L I
L I
Landscape Lighting by Landscape Specialist. Landscape pool power considered in External Electrical Room Power Drawing (Isolator)
PB
0.00
Subconsultant/ Subcontractor:
DRIVEWAY
Note: Contractor should ensure necessary containment (Concealed PVC conduit/Cable Tray/Trunking/Junction boxes, etc.) for the following systems from specialist;1. Home Automation 2. Audio Video Intercom 3. CCTV 4. Surround Sound 5. SMATV
Drawing title:
SETTINGOUT PLAN LIGHT LAYOUT Original Scale
Drawn
Checked SP/SJ
1:100
Authorised
Date: AUG-2022
Date:
AUG-2022
Project Number
ROAD
460-22
GROUND FLOOR PLAN
Plot Size RK
SP/EL
Date:
AUG-2022
A1
Sheet #
Rev
EL-100
00
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY.
315°
2. DO NOT SCALE FROM THE DRAWINGS.
NE
225°
SW
L OT
N
P
L OT
I MI T
NW
P
L
T
MI
L I
45°
SE
3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
135°
6. ALL SUBMISSIONS AND DRAWINGS ARE FOLLOWING M/S DDA AND M/S EMAAR REGULATIONS.
01
02 03
04
05
06 07 09
10 11
12
13
KEYPLAN:
LEGENDS FOR LIGHTING SYMBOLS
R7/DB-GF PUMPROOM Y4/DB-BF
Maneuvering Parking W/
A
F/A
& BALANCE TANK
P
A1
M
S
A
LED Outdoor Light IP65 Glass Diffuser, Aluminum Body With Aluminum Reflector, with pole, Including LED Driver for external driveway ramp. 100W
B
Recessed Downlight Bath/Toilet 11W IP-44, CCT: 4000°K, CRI:≥ 90, Lifetime: 50,000 hours L70 at 25°C, Warranty: 5 yrs, 680lm
C
Directional Magnetic Trimless Track Light LED 9 W/M
D
Recessed Trimless Spot Light, Circular, LED with Driver, 3000K, 1200lm, 10W
E
Recessed Trimless Directional Spot Light, Circular, LED with Driver, 3000K, 1200lm 12 W
F
Wall/Surface mounted LED Lighting Fixture, Round Vardal Type, 20W, IP65, Metal Enclosure, CCT:3000°K.
G
LED Light Fixture, IP68 Die Cast Aluminum Housing with high corrosion resistance, Aluminum Reflector, tempered glass, fire-resistant silicon seal gasket, polycarbonate pre-buried bucket, outdoor electrostatic powder painting, optical level PMMA lens, standard stainless steel frame and fastness part, Including LED Driver. Must be supplied at a maximum voltage of 12V AC or 30V DC for Underwater use.
H
Wall Mounted LED Lighting Fixture, 20W, IP65, Metal Enclosure, CCT:3000°K.
I
Decorative Type Wall Mounted LED Lighting Fixture, 12W, IP44, Metal Enclosure.
J
Surafce Mounted LED Lighting Fixture, 32W, IP66, CCT:4000°K, Warranty: 5 yrs.
K
Surafce Mounted LED Lighting Fixture, 22W, IP66, CCT: 4000°K, Warranty: 5 yrs.
L
LED Mirror Light with Safety Glass Diffuser, 18W, IP54, CCT:4000°K, Warranty: 5 yrs.
M
Pendent LED Luminaries with 3 wings, 3x18W, IP44, CCT:3000°K
N
Floor mounted LED Light Fixture, 10W, IP65, Metal Enclosure, CCT:3000°K.
O
IP 65 Floor Mounted LED Uplight Fixture, Die Cast Aluminum Body Aluminum Reflector Glass Diffuser, Including LED Driver. 12W
P
Pendent LED Luminaries with 3 wings, 3x9W, IP44, CCT:4000°K
Q
LED Hidden Light Strip, CCT: 3000°K. 9 W/M
R
16.5W Dimmable LED Track Lighting Heads Compatible with Single Circuit H Type Rail Ceiling Spotlight for Accent Task Wall Art Exhibition Lighting 90 CRI 24° Black (3000K Warm White)
S
15W Bollard LED Light For Garden Lighting, IP-67
T
10W Boundary Wall LED Light, IP-67
B TOILET
TV
A2
DESCRIPTION
DRIVER'S -3.20
C
W/ P
M
SHOW GARAGE 192 m2 -3.15
-3.18
MAID'S 19 m2
ENTRANCE
A3
-3.15
M
A SHISH E LOUNG R4/DB-BF 20 m2
T
D S
N SUNKE EN GARD
A4
Y3/DB-BF
A5 M
E Y2/DB-BF
-3.20
KIT
F
R3/DB-BF
B6/DB-GF
Y1/DB-BF
Checked
Authorized
Rev
Date
Authorized
-3.20
SERVICE ENTRANCE
T
R1/DB-BF
G
DOOR BELL
F/A
M
A6
-3.15
H
ONE WAY, ONE GANG LIGHTING SWITCH. (W.P-WEATHER PROOF)
-3.15
R5/DB-BF
ONE WAY, TWO GANG LIGHTING SWITCH. (W.P-WEATHER PROOF)
W/P
Purpose of issue
ELEC. 6 m2
W/P
ONE WAY, THREE GANG LIGHTING SWITCH, (W.P-WEATHER PROOF)
MECHANICAL 12 m2
M
SERVICE ENTRANCE
LAUNDRY 12 m2
G GAMIN M O O R N OPE 26 m2
K
TIMER SWITCH 00 INDY5
WIDE
INDY5
E 00 WID
INDY5
A7
PB
DOOR BELL PUSH BUTTON SWITCH - W/P
00 WID
E
B4/DB-BF
Project Title:
W/P
B1/DB-BF
WATER TANK 12 m2
MR. MOHAMED YASIN FARUQE
TWO WAY, TWO GANG LIGHTING SWITCH. (W.P-WEATHER PROOF) T
-3.15
M
Client:
TWO WAY, ONE GANG LIGHTING SWITCH. (W.P-WEATHER PROOF)
A CINEM 2 25.0 m
N
SCREE
PUMP ROOM & BALANCETANK 13 m2
M
MOTION SENSOR-OCCUPANCY SENSOR (MICORPROCESSOR BASED)
S
SHAVER SOCKET @ 1.25m FROM FFL
NOTE:* ALL LIGHTING FIXTURES TO BE LED TYPE * ALL EXTERNAL LIGHTING TO BE CONTROLLED BY TIMER+PHOTOCELL+CONTACTOR
L
PRIVATE VILLA (B+G+1+R) DUBAI HILLS, DUBAI, UAE PLOT NO.: - 6316624 Consultant:
P
08
L I
MI
L OT
T
Date
Y5/DB-BF
F/A
J
Description
Rev
MI
P
T
L I Main Contractor:
Subconsultant/ Subcontractor:
BASEMENT FLOOR PLAN
Note: Contractor should ensure necessary containment (Concealed PVC conduit/Cable Tray/Trunking/Junction boxes, etc.) for the following systems from specialist;1. Home Automation 2. Audio Video Intercom 3. CCTV 4. Surround Sound 5. SMATV
Drawing title:
BASEMENT FLOOR PLAN LIGHT LAYOUT Original Scale
Drawn
Checked SP/SJ
1:100
Authorised
Date: AUG-2022
Date:
AUG-2022
Project Number
460-22
Plot Size RK
SP/EL
Date:
AUG-2022
A1
Sheet #
Rev
EL-101
00
L OT
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY.
315°
NE
N
P
NW
I MI T
3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
P
135°
L OT
225°
L OT
L
MI
T
L I
2. DO NOT SCALE FROM THE DRAWINGS.
SW
45°
SE
6. ALL SUBMISSIONS AND DRAWINGS ARE FOLLOWING M/S DDA AND M/S EMAAR REGULATIONS.
Y2/DB-EX
KEYPLAN:
01
02 03 SUNKEN 04
05
LOUNGE
06 07 09 JACUZZI
10 11
FIRE PLACE
FIRE PIT +0.45
12
13
LEGENDS FOR LIGHTING
SWIMMING POOL Swimming Pool Lighting by Swimming Pool Specialist. Swimming pool power considered -1.35 in Basement Floor Power Drawing (Isolator)
+0.45
SYMBOLS
+0.40
From Jacuzzi Isolator
-0.20
+0.20
+0.35
+0.35
-0.20
R7/DB-GF
OUTDOOR LIVING 57.0 m2
A
A1
COUNTER
B
+0.40
T/B
-0.20
BBQ
A
LED Outdoor Light IP65 Glass Diffuser, Aluminum Body With Aluminum Reflector, with pole, Including LED Driver for external driveway ramp. 100W
B
Recessed Downlight Bath/Toilet 11W IP-44, CCT: 4000°K, CRI:≥ 90, Lifetime: 50,000 hours L70 at 25°C, Warranty: 5 yrs, 680lm
C
Directional Magnetic Trimless Track Light LED 9 W/M
D
Recessed Trimless Spot Light, Circular, LED with Driver, 3000K, 1200lm, 10W
E
Recessed Trimless Directional Spot Light, Circular, LED with Driver, 3000K, 1200lm 12 W
F
Wall/Surface mounted LED Lighting Fixture, Round Vardal Type, 20W, IP65, Metal Enclosure, CCT:3000°K.
G
LED Light Fixture, IP68 Die Cast Aluminum Housing with high corrosion resistance, Aluminum Reflector, tempered glass, fire-resistant silicon seal gasket, polycarbonate pre-buried bucket, outdoor electrostatic powder painting, optical level PMMA lens, standard stainless steel frame and fastness part, Including LED Driver. Must be supplied at a maximum voltage of 12V AC or 30V DC for Underwater use.
H
Wall Mounted LED Lighting Fixture, 20W, IP65, Metal Enclosure, CCT:3000°K.
I
Decorative Type Wall Mounted LED Lighting Fixture, 12W, IP44, Metal Enclosure.
J
Surafce Mounted LED Lighting Fixture, 32W, IP66, CCT:4000°K, Warranty: 5 yrs.
K
Surafce Mounted LED Lighting Fixture, 22W, IP66, CCT: 4000°K, Warranty: 5 yrs.
L
LED Mirror Light with Safety Glass Diffuser, 18W, IP54, CCT:4000°K, Warranty: 5 yrs.
M
Pendent LED Luminaries with 3 wings, 3x18W, IP44, CCT:3000°K
N
Floor mounted LED Light Fixture, 10W, IP65, Metal Enclosure, CCT:3000°K.
O
IP 65 Floor Mounted LED Uplight Fixture, Die Cast Aluminum Body Aluminum Reflector Glass Diffuser, Including LED Driver. 12W
P
Pendent LED Luminaries with 3 wings, 3x9W, IP44, CCT:4000°K
Q
LED Hidden Light Strip, CCT: 3000°K. 9 W/M
R
16.5W Dimmable LED Track Lighting Heads Compatible with Single Circuit H Type Rail Ceiling Spotlight for Accent Task Wall Art Exhibition Lighting 90 CRI 24° Black (3000K Warm White)
S
15W Bollard LED Light For Garden Lighting, IP-67
T
10W Boundary Wall LED Light, IP-67
-3.20
A2 W/P
C
DESCRIPTION
R6/DB-GF
+0.35
OPEN TO SKY
OPEN Refer First Floor TOPlan for the Lighting in Double Height Area ABOVE
SHOW KITCHEN 30.0 m2
R3/DB-GF
LIVING
55.0 m
2
A3
B3/DB-GF Y3/DB-GF
TV
Y2/DB-GF
D
n Sunke n e d r a G
DINING 37.0 m2 BANQUETING AREA 6.20m2
TOILET 4.30 m2 Y4/DB-GF
+0.40
E
A5 SUITE GUEST 2 m .0 6 2
B6/DB-GF R5/DB-GF
Refer First Floor Plan for the Lighting in Double Height Area
F
-3.20
Checked
Authorized
Rev
Date
Authorized
ONE WAY, ONE GANG LIGHTING SWITCH. (W.P-WEATHER PROOF)
S
ONE WAY, TWO GANG LIGHTING SWITCH. (W.P-WEATHER PROOF)
A6
Purpose of issue
T/B
ONE WAY, THREE GANG LIGHTING SWITCH, (W.P-WEATHER PROOF)
Client:
R1/DB-GF
+0.45
+0.45
TWO WAY, ONE GANG LIGHTING SWITCH. (W.P-WEATHER PROOF)
MR. MOHAMED YASIN FARUQE
Y1/DB-GF
J PANTRY
K
Date
R2/DB-GF
T/B
B5/DB-GF
Description
Rev
DOOR BELL
B1/DB-GF
S
H
OPEN TO SKY REFLECTIVE POOL
CHEF'S KITCHEN 14.40 m2
G
A4
TOILET 8.50 m2
TWO WAY, TWO GANG LIGHTING SWITCH. (W.P-WEATHER PROOF)
+0.35
FOYER 14.0 m2 Refer First Floor Plan for the Lighting in Double Height Area
T
SUITE GUEST 2 m .0 8 2
PB
S
+0.40
TIMER SWITCH
DOOR BELL PUSH BUTTON SWITCH - W/P
SUITE GUEST 2 .0 30 m
REFLECTIVE POOL
MAIN ENTRANCE
A7
MOTION SENSOR-OCCUPANCY SENSOR (MICORPROCESSOR BASED)
S
SHAVER SOCKET @ 1.25m FROM FFL
PRIVATE VILLA (B+G+1+R) DUBAI HILLS, DUBAI, UAE PLOT NO.: - 6316624
+0.40
NOTE:* ALL LIGHTING FIXTURES TO BE LED TYPE * ALL EXTERNAL LIGHTING TO BE CONTROLLED BY TIMER+PHOTOCELL+CONTACTOR
-0.20
L
Project Title: M
Consultant:
+0.35
+0.35 GARBA GE ELECT. RM RM. +7.66 UTILITY FFL ROOM+7.66
FFL
+0.35
08
MI
L OT
-0.05
P
Landscape Lighting by Landscape Specialist. Landscape pool power considered in External Electrical Room Power Drawing (Isolator)
T W/P
0.00
0.00 +0.05
T
-EX
LPG M ETE
0.00
R
R2/DB-EX
P
L OT
GATE LEVEL
MI
Y1/DB -EX
R1/DB
Main Contractor:
L I
L I
Landscape Lighting by Landscape Specialist. Landscape pool power considered in External Electrical Room Power Drawing (Isolator)
PB
0.00
Subconsultant/ Subcontractor:
DRIVEWAY
Note: Contractor should ensure necessary containment (Concealed PVC conduit/Cable Tray/Trunking/Junction boxes, etc.) for the following systems from specialist;1. Home Automation 2. Audio Video Intercom 3. CCTV 4. Surround Sound 5. SMATV
ROAD
GROUND FLOOR PLAN
Drawing title:
GROUND FLOOR PLAN LIGHT LAYOUT Original Scale
Drawn
Checked SP/SJ
1:100
Authorised
Date: AUG-2022
Date:
AUG-2022
Project Number
460-22
Plot Size RK
SP/EL
Date:
AUG-2022
A1
Sheet #
Rev
EL-102
00
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY.
315°
2. DO NOT SCALE FROM THE DRAWINGS.
NE
225°
SW
45°
SE
NW
N
3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
135°
6. ALL SUBMISSIONS AND DRAWINGS ARE FOLLOWING M/S DDA AND M/S EMAAR REGULATIONS. KEYPLAN:
01
02 03
04
05
06 07 09
10 11
12
13
LEGENDS FOR LIGHTING SYMBOLS
edge of canopy
edge of canopy
A1
Semi-Covered Balcony 11 m2 +4.80
A B
DESCRIPTION
A
LED Outdoor Light IP65 Glass Diffuser, Aluminum Body With Aluminum Reflector, with pole, Including LED Driver for external driveway ramp. 100W
B
Recessed Downlight Bath/Toilet 11W IP-44, CCT: 4000°K, CRI:≥ 90, Lifetime: 50,000 hours L70 at 25°C, Warranty: 5 yrs, 680lm
C
Directional Magnetic Trimless Track Light LED 9 W/M
D
Recessed Trimless Spot Light, Circular, LED with Driver, 3000K, 1200lm, 10W
E
Recessed Trimless Directional Spot Light, Circular, LED with Driver, 3000K, 1200lm 12 W
F
Wall/Surface mounted LED Lighting Fixture, Round Vardal Type, 20W, IP65, Metal Enclosure, CCT:3000°K.
G
LED Light Fixture, IP68 Die Cast Aluminum Housing with high corrosion resistance, Aluminum Reflector, tempered glass, fire-resistant silicon seal gasket, polycarbonate pre-buried bucket, outdoor electrostatic powder painting, optical level PMMA lens, standard stainless steel frame and fastness part, Including LED Driver. Must be supplied at a maximum voltage of 12V AC or 30V DC for Underwater use.
H
Wall Mounted LED Lighting Fixture, 20W, IP65, Metal Enclosure, CCT:3000°K.
I
Decorative Type Wall Mounted LED Lighting Fixture, 12W, IP44, Metal Enclosure.
J
Surafce Mounted LED Lighting Fixture, 32W, IP66, CCT:4000°K, Warranty: 5 yrs.
K
Surafce Mounted LED Lighting Fixture, 22W, IP66, CCT: 4000°K, Warranty: 5 yrs.
L
LED Mirror Light with Safety Glass Diffuser, 18W, IP54, CCT:4000°K, Warranty: 5 yrs.
M
Pendent LED Luminaries with 3 wings, 3x18W, IP44, CCT:3000°K
N
Floor mounted LED Light Fixture, 10W, IP65, Metal Enclosure, CCT:3000°K.
O
IP 65 Floor Mounted LED Uplight Fixture, Die Cast Aluminum Body Aluminum Reflector Glass Diffuser, Including LED Driver. 12W
P
Pendent LED Luminaries with 3 wings, 3x9W, IP44, CCT:4000°K
Q
LED Hidden Light Strip, CCT: 3000°K. 9 W/M
R
16.5W Dimmable LED Track Lighting Heads Compatible with Single Circuit H Type Rail Ceiling Spotlight for Accent Task Wall Art Exhibition Lighting 90 CRI 24° Black (3000K Warm White)
S
15W Bollard LED Light For Garden Lighting, IP-67
T
10W Boundary Wall LED Light, IP-67
limit of pergola TERRACE 30 m2
A2 B4/DB-FF
R1/DB-FF
FAMILY ROOM 24.0 m2
C Master 42.0 m2
OPEN TO SKY OPEN TO SKY
open to sky
R5/DB-FF open
to below
R4/DB-FF
A3 Y5/DB-FF
+4.85
S
B5/DB-FF
D
SUITE GUEST 2 .0 27 m
A4
S
R2/DB-FF
A5 open to below
E F
OPEN TO SKY
S
REFLECTIVE POOL
G
Date
Checked
Authorized
Rev
Date
Authorized
DOOR BELL
SUITE GUEST 2 .0 28 m
B3/DB-FF
Description
Rev
ONE WAY, ONE GANG LIGHTING SWITCH. (W.P-WEATHER PROOF)
T
B2/DB-FF
ONE WAY, TWO GANG LIGHTING SWITCH. (W.P-WEATHER PROOF)
A6
H
Purpose of issue ONE WAY, THREE GANG LIGHTING SWITCH, (W.P-WEATHER PROOF)
T/A +4.85
Client:
TWO WAY, ONE GANG LIGHTING SWITCH. (W.P-WEATHER PROOF)
S
S
J
K
open to sky
MR. MOHAMED YASIN FARUQE
TWO WAY, TWO GANG LIGHTING SWITCH. (W.P-WEATHER PROOF)
Master 42.0 m2
open to below
T
TIMER SWITCH PB
Y1/DB-FF
DOOR BELL PUSH BUTTON SWITCH - W/P
Master 2 42.0 m
REFLECTIVE POOL OPEN TO SKY BALCONY 5 m2
A7
Project Title: M
MOTION SENSOR-OCCUPANCY SENSOR (MICORPROCESSOR BASED)
S
SHAVER SOCKET @ 1.25m FROM FFL
PRIVATE VILLA (B+G+1+R) DUBAI HILLS, DUBAI, UAE PLOT NO.: - 6316624
Y3/DB-FF
edge of canopy ny 5 m
d Balco Covere
L
2
NOTE:* ALL LIGHTING FIXTURES TO BE LED TYPE * ALL EXTERNAL LIGHTING TO BE CONTROLLED BY TIMER+PHOTOCELL+CONTACTOR
Consultant:
edge of canopy
08 Main Contractor:
Subconsultant/ Subcontractor:
Note: Contractor should ensure necessary containment (Concealed PVC conduit/Cable Tray/Trunking/Junction boxes, etc.) for the following systems from specialist;1. Home Automation 2. Audio Video Intercom 3. CCTV 4. Surround Sound 5. SMATV
FIRST FLOOR PLAN
Drawing title:
FIRST FLOOR PLAN LIGHT LAYOUT Original Scale
Drawn
Checked SP/SJ
1:100
Authorised
Date: AUG-2022
Date:
AUG-2022
Project Number
460-22
Plot Size RK
SP/EL
Date:
AUG-2022
A1
Sheet #
Rev
EL-103
00
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY.
315°
2. DO NOT SCALE FROM THE DRAWINGS.
NE
225°
SW
45°
SE
NW
N
3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
135°
6. ALL SUBMISSIONS AND DRAWINGS ARE FOLLOWING M/S DDA AND M/S EMAAR REGULATIONS. KEYPLAN:
01
02 03
04
05
06 07 09
10 11
12
13
LEGENDS FOR LIGHTING SYMBOLS
A1
CANOPY
A B
A2
DESCRIPTION
A
LED Outdoor Light IP65 Glass Diffuser, Aluminum Body With Aluminum Reflector, with pole, Including LED Driver for external driveway ramp. 100W
B
Recessed Downlight Bath/Toilet 11W IP-44, CCT: 4000°K, CRI:≥ 90, Lifetime: 50,000 hours L70 at 25°C, Warranty: 5 yrs, 680lm
C
Directional Magnetic Trimless Track Light LED 9 W/M
D
Recessed Trimless Spot Light, Circular, LED with Driver, 3000K, 1200lm, 10W
E
Recessed Trimless Directional Spot Light, Circular, LED with Driver, 3000K, 1200lm 12 W
F
Wall/Surface mounted LED Lighting Fixture, Round Vardal Type, 20W, IP65, Metal Enclosure, CCT:3000°K.
G
LED Light Fixture, IP68 Die Cast Aluminum Housing with high corrosion resistance, Aluminum Reflector, tempered glass, fire-resistant silicon seal gasket, polycarbonate pre-buried bucket, outdoor electrostatic powder painting, optical level PMMA lens, standard stainless steel frame and fastness part, Including LED Driver. Must be supplied at a maximum voltage of 12V AC or 30V DC for Underwater use.
H
Wall Mounted LED Lighting Fixture, 20W, IP65, Metal Enclosure, CCT:3000°K.
I
Decorative Type Wall Mounted LED Lighting Fixture, 12W, IP44, Metal Enclosure.
J
Surafce Mounted LED Lighting Fixture, 32W, IP66, CCT:4000°K, Warranty: 5 yrs.
K
Surafce Mounted LED Lighting Fixture, 22W, IP66, CCT: 4000°K, Warranty: 5 yrs.
L
LED Mirror Light with Safety Glass Diffuser, 18W, IP54, CCT:4000°K, Warranty: 5 yrs.
M
Pendent LED Luminaries with 3 wings, 3x18W, IP44, CCT:3000°K
N
Floor mounted LED Light Fixture, 10W, IP65, Metal Enclosure, CCT:3000°K.
O
IP 65 Floor Mounted LED Uplight Fixture, Die Cast Aluminum Body Aluminum Reflector Glass Diffuser, Including LED Driver. 12W
P
Pendent LED Luminaries with 3 wings, 3x9W, IP44, CCT:4000°K
Q
LED Hidden Light Strip, CCT: 3000°K. 9 W/M
R
16.5W Dimmable LED Track Lighting Heads Compatible with Single Circuit H Type Rail Ceiling Spotlight for Accent Task Wall Art Exhibition Lighting 90 CRI 24° Black (3000K Warm White)
S
15W Bollard LED Light For Garden Lighting, IP-67
T
10W Boundary Wall LED Light, IP-67
FIRE PIT
C
+8.60
OPEN TO SKY OPEN TO SKY
ROOF LOUNGE 42m2 +9.20
A3 Jacuzzi 6 m2
+8.90
D
A4 R7/DB-FF
From Jacuzzi Isolator
A5 2
00m
BBQ 2
B5/DB-FF R6/DB-FF
E
Description
Rev
Date
Checked
Authorized
Rev
Date
Authorized
+8.65
F
OPEN TO SKY SERVICE AREA
DOOR BELL
REFLECTIVE POOL
+8.60
ONE WAY, ONE GANG LIGHTING SWITCH. (W.P-WEATHER PROOF)
T
G
A6
ONE WAY, TWO GANG LIGHTING SWITCH. (W.P-WEATHER PROOF)
+8.60
H
Purpose of issue
F/B
ONE WAY, THREE GANG LIGHTING SWITCH, (W.P-WEATHER PROOF)
Y7/DB-FF
Client:
B6/DB-RF
TWO WAY, ONE GANG LIGHTING SWITCH. (W.P-WEATHER PROOF)
J
MR. MOHAMED YASIN FARUQE
TWO WAY, TWO GANG LIGHTING SWITCH. (W.P-WEATHER PROOF) T
TIMER SWITCH
K
E SERVIC +8.60
REFLECTIVE POOL
ENTRY FRAME
PB
DOOR BELL PUSH BUTTON SWITCH - W/P
A7
Project Title: M
MOTION SENSOR-OCCUPANCY SENSOR (MICORPROCESSOR BASED)
S
SHAVER SOCKET @ 1.25m FROM FFL
NOTE:* ALL LIGHTING FIXTURES TO BE LED TYPE * ALL EXTERNAL LIGHTING TO BE CONTROLLED BY TIMER+PHOTOCELL+CONTACTOR
+9.45
L
AREA
PRIVATE VILLA (B+G+1+R) DUBAI HILLS, DUBAI, UAE PLOT NO.: - 6316624 Consultant:
+8.25
CANOPY
08
Main Contractor:
ROOF FLOOR PLAN
Subconsultant/ Subcontractor:
Note: Contractor should ensure necessary containment (Concealed PVC conduit/Cable Tray/Trunking/Junction boxes, etc.) for the following systems from specialist;1. Home Automation 2. Audio Video Intercom 3. CCTV 4. Surround Sound 5. SMATV
Drawing title:
ROOF FLOOR PLAN LIGHT LAYOUT Original Scale
Drawn
Checked SP/SJ
1:100
Authorised
Date: AUG-2022
Date:
AUG-2022
Project Number
460-22
Plot Size RK
SP/EL
Date:
AUG-2022
A1
Sheet #
Rev
EL-104
00
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY.
315°
NE
N
NW
135°
P
225°
4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
L
MI
3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER.
6. ALL SUBMISSIONS AND DRAWINGS ARE FOLLOWING M/S DDA AND M/S EMAAR REGULATIONS.
L OT
T
L I
2. DO NOT SCALE FROM THE DRAWINGS.
SW
45°
SE
P
L OT
I MI T
KEYPLAN:
02 03 04 SUNKEN LOUNGE
05
23.0 m2
06 07 09 FIRE PLACE
01
JACUZZI 11 m2
FIRE PIT
+0.45
10 11
12
13
SWIMMING POOL 56 m2
+0.45
-1.35
+0.40
-0.20
+0.35
+0.35
+0.35
OUTDOOR LIVING 57.0 m2
OUTDOOR DINING 28.0 m2
A
A1
B
+0.40
+0.40
-3.20
-0.20
A2
C +0.35
OPEN TO ABOVE
OPEN TO SKY SHOW KITCHEN 30.0 m2
LIVING
2
55.0 m
A3 TV
D
n Sunke n e d r a G
+0.40
BANQUETING AREA 6.20m2
DINING 37.0 m2
TOILET 5.80 m2
E
-3.20
Purpose of issue
ELECTRICAL ROOM IN BASEMENT FLOOR
+0.45
+0.45
TOILET 8.50 m2
+0.35
FOYER 14.0 m2
Project Title:
SUITE GUEST 2 28.0 m
PRIVATE VILLA (B+G+1+R) DUBAI HILLS, DUBAI, UAE PLOT NO.: - 6316624
SUITE GUEST 2 30.0 m
REFLECTIVE POOL
MAIN ENTRANCE
A7
+0.40
Consultant:
150mmØ Y/G ECC EARTH CABLE
4x150mmØ+50mmØ (Spare) uPVC DUCTS FOR POWER CABLES PROTECTED BY A CONCRETE LAYER IN DRIVEWAY AREAS.
K
Authorized
40x80cm
+0.40
5.9516
Date
MR. MOHAMED YASIN FARUQE
A6
950x20cm
EARTH PIT-2
SIDE ENTRANCE
Rev
Client:
CHEF'S KITCHEN 14.70 m2
PANTRY
J
Authorized
A4
REFLECTIVE POOL
200x20cm
Checked
A5
OPEN TO SKY
H
Date
SUITE GUEST 2 26.0 m
F
G
Description
Rev
-0.20 +0.35
+0.35
+0.35
-0.05 4x150mmØ + 50mmØ uPVC DUCTS FOR POWER CABLES PROTECTED BY A CONCRETE LAYER IN DRIVEWAY AREAS.
P LPG M
0.00 +0.05
T
L I
1.2308
0.00
ETER
Main Contractor:
08
L OT
MI
Electrical Manhole 80x80x90cm
MI
+7.6
6 MDFFBL-1
P
METER CABINET-1 T IN IP 65 GRP KWHR METER CABINET WITH PADLOCK AS PER DEWA REQUIREMENT 0.00
ELECT. RM.
L I
GARBA GE RM +7.66 FFL
CABLE BY DEWA 0.00
Subconsultant/ Subcontractor:
ROAD SIDE
Drawing title:
SETTINGOUT PLAN POWER LAYOUT Note: Contractor should ensure necessary containment (Concealed PVC conduit/Cable Tray/Trunking/Junction boxes, etc.) for the following systems from specialist;1. Home Automation 2. Audio Video Intercom 3. CCTV 4. Surround Sound 5. SMATV
Original Scale
Drawn
Checked SP/SJ
1:100
Authorised
Date: AUG-2022
Date:
AUG-2022
Project Number
460-22
Plot Size RK
SP/EL
Date:
AUG-2022
A1
Sheet #
Rev
EP-100
00
L OT
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY.
315°
NE
N
L OT
I MI T
NW
P
L 135°
P
225°
L OT T
MI L I
2. DO NOT SCALE FROM THE DRAWINGS.
SW
45°
SE
3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS. 6. ALL SUBMISSIONS AND DRAWINGS ARE FOLLOWING M/S DDA AND M/S EMAAR REGULATIONS.
01
02 03
04
05
06 07 09
10 11
12
13
KEYPLAN:
B8/DB-BF
Maneuvering Parking
PUMPROOM & BALANCE TANK
RYB12/DB-BF
SWIMMING POOL PROV.
A1
A B R10/DB-BF
Final Location as per Site
FOR SUMP-PUMP
TV
TOILET
A2
EF-02-320 L/S
B2/DB-AC
DRIVER'S R1/DB-AC
EF-02
-3.20
C
R9/DB-BF
EF-03-630 L/S
B4/DB-AC EF-03
Y8/DB-BF
SHOW GARAGE 192 m2 B6/DB-BF
100x50mm HDGI CABLE TRAY FOR POWER CABLES @ H/L
-3.15
MAID'S 19 m2
D
-3.18
A3
-3.15
ENTRANCE A SHISH E G N U O L 2 m 20
N SUNKE EN GARD
R1/DB-AC
A4
A5 Description
Rev
Date
Checked
Authorized
Rev
Date
Authorized
E -3.20
KIT
F
G H R6/DB-BF For Home Automation Panel
J
ELECTRICAL ROOM IN BASEMENT FLOOR
Y6/DB-BF
ELEC. 6 m2
R8/DB-BF SERVICE ENTRANCE
-3.20
B1/DB-AC
A6
-3.15 R7/DB-BF
Y1/DB-AC
For CCTV Controller
-3.15
R8/DB-BF For Audio/Visual
300x50mm HDGI CABLE TRAY FOR POWER CABLES @ H/L
DB-BF SERVICE ENTRANCE
LAUNDRY 12 m2
B9/DB-BF
Purpose of issue
Y7/DB-BF
MECHANICAL 12 m2
Client:
G GAMIN M ROO OPEN 26 m2
Y9/DB-BF
K
MR. MOHAMED YASIN FARUQE
A CINEM 2 25.0 m 0 WIDE
INDY50
A7
0 WIDE
INDY50
0 WIDE
B7/DB-BF
INDY50
-3.15
RYB11/DB-BF
N
SCREE
PUMP ROOM & BALANCETANK 13 m2
Project Title:
PRIVATE VILLA (B+G+1+R) DUBAI HILLS, DUBAI, UAE PLOT NO.: - 6316624
Transfer Pump Control Panel
WATER TANK 12 m2
L
Consultant:
P
08
L I
MI
L OT
T
MI
P
T
L I Main Contractor:
Subconsultant/ Subcontractor:
Drawing title:
BASEMENT FLOOR PLAN POWER LAYOUT
BASEMENT FLOOR PLAN
Note: Contractor should ensure necessary containment (Concealed PVC conduit/Cable Tray/Trunking/Junction boxes, etc.) for the following systems from specialist;1. Home Automation 2. Audio Video Intercom 3. CCTV 4. Surround Sound 5. SMATV
Original Scale
Drawn
Checked SP/SJ
1:100
Authorised
Date: AUG-2022
Date:
AUG-2022
Project Number
460-22
Plot Size RK
SP/EL
Date:
AUG-2022
A1
Sheet #
Rev
EP-101
00
L OT
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY.
315°
NE
N
P
I MI T
135°
L OT
NW
L
P
225°
L OT T
MI
L I
2. DO NOT SCALE FROM THE DRAWINGS.
SW
45°
SE
3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS. 6. ALL SUBMISSIONS AND DRAWINGS ARE FOLLOWING M/S DDA AND M/S EMAAR REGULATIONS.
01
02 03 SUNKEN 04
05
06 07 09
LOUNGE
JACUZZI
FIRE PIT
10 11
12
FIRE PLACE
SWIMMING POOL
RYB13/DB-BF For Jacuzzi
+0.45
KEYPLAN:
13
+0.45
-1.35
+0.40
From DB-BF
-0.20
+0.20
+0.35
+0.35
-0.20
OUTDOOR LIVING 57.0 m2
A
A1
Y3/DB-EX
COUNTER
B
+0.40
-3.20
-0.20
BBQ
A2 Y8/DB-GF
C +0.35 B10/DB-GF
OPEN TO SKY
OPEN TO ABOVE
SHOW KITCHEN 30.0 m2 Y10/DB-GF
R3/DB-AC
LIVING
R10/DB-GF
D
BANQUETING AREA 6.20m2
+0.40
E
B9/DB-GF
H B7/DB-GF FOR FACP
J
ELECTRICAL ROOM IN BASEMENT FLOOR
G
n Sunke n e Gard
A5
CHEF'S KITCHEN 14.40 m2 R11/DB-GF
B8/DB-GF FOR ONT
B11/DB-GF
B7/DB-GF
R12/DB-GF
DB-BF
Purpose of issue
Y3/DB-AC Final Location as+0.45 per Site
+0.45
Client: +0.35
FOYER 14.0 m2
SUITE GUEST 2 .0 28 m
Y12/DB-GF
n Pump Irrigatio Panel Control
TOILET 8.50 m2
B3/DB-AC
MR. MOHAMED YASIN FARUQE /DPuBmp-GF RYrBIrr14 igation Fo
A7 R8/DB-GF
MAIN ENTRANCE
+0.40
Project Title:
PRIVATE VILLA (B+G+1+R) DUBAI HILLS, DUBAI, UAE PLOT NO.: - 6316624
Y7/DB-GF
4x150mmØ+50mmØ (Spare) uPVC DUCTS FOR POWER CABLES PROTECTED BY A CONCRETE LAYER IN DRIVEWAY AREAS.
Electrical Manhole 80x80x90cm
+0.35
0.00 0.00
P
L OT
CABLE BY DEWA
MI
T
+0.05
L I
B4/DB-EX For Car Entrance Gate
08
L OT
MI
+0.35
P
L I
B3/DB-EX
+0.35
-0.05 4x150mmØ + 50mmØ uPVC DUCTS FOR POWER CABLES PROTECTED BY A CONCRETE LAYER IN DRIVEWAY AREAS. ETER
-0.20
Consultant:
EARTH PIT-1 DB-EX
LPG M
Authorized
A6 R4/DB-AC
150mmØ Y/G ECC EARTH CABLE
1.2308
Date
Y4/DB-AC
REFLECTIVE POOL
METER CABINET-1 T IN IP 65 GRP KWHR METER CABINET WITH PADLOCK AS PER DEWA REQUIREMENT 0.00
Rev
REFLECTIVE POOL
SUITE GUEST 2 30.0 m
LCP-E GARBA X GE ELECT. RM RYB5/DB-EX R + M 7 UTILITY .66 . For Landscape LightingFFL ROOM+7.66 MDFFBL-1
Authorized
-3.20
+0.40
R3/DB-EX
Checked
SUITE GUEST 2 26.0 m
DB-GF
For Access Control
L
Date
R9/DB-GF
EARTH PIT-2
5.9516
Description
Rev
LCP-GF
OPEN TO SKY
PANTRY
K
A4
DB-AC
Y2/DB-AC
F
TV
DINING 37.0 m2
R2/DB-AC
TOILET 4.30 m2
A3
R5/DB-AC
100x50mm HDGI CABLE TRAY FOR POWER CABLES @ H/L
Y9/DB-GF
2 55.0 m
GATE LEVEL
Main Contractor: 0.00
ROAD SIDE
DRIVEWAY
Subconsultant/ Subcontractor:
Drawing title:
GROUND FLOOR PLAN POWER LAYOUT
ROAD
GROUND FLOOR PLAN
Note: Contractor should ensure necessary containment (Concealed PVC conduit/Cable Tray/Trunking/Junction boxes, etc.) for the following systems from specialist;1. Home Automation 2. Audio Video Intercom 3. CCTV 4. Surround Sound 5. SMATV
Original Scale
Drawn
Checked SP/SJ
1:100
Authorised
Date: AUG-2022
Date:
AUG-2022
Project Number
460-22
Plot Size RK
SP/EL
Date:
AUG-2022
A1
Sheet #
Rev
EP-102
00
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY.
315°
NE
225°
NW
N
2. DO NOT SCALE FROM THE DRAWINGS.
SW
45°
SE
3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
135°
6. ALL SUBMISSIONS AND DRAWINGS ARE FOLLOWING M/S DDA AND M/S EMAAR REGULATIONS.
01
02 03
04
05
06 07 09
10 11
12
13
edge of canopy
KEYPLAN:
edge of canopy
A1
Semi-Covered Balcony 11 m2 +4.80
A B
limit of pergola TERRACE 30 m2
A2 FAMILY ROOM 24.0 m2
C Master 42.0 m2
open to sky
OPEN TO SKY OPEN TO SKY
open to below
Y10/DB-GF B7/DB-AC
Y8/DB-GF R10/DB-GF
A3
DB-FF Final Location as per Site
LCP-FF +4.85
D
SUITE GUEST 2 27.0 m
A4
Y5/DB-AC Y7/DB-AC
R7/D
A5
B-AC
E F
OPEN TO SKY
Date
Checked
Authorized
Rev
Date
Authorized
SUITE GUEST 2 28.0 m
REFLECTIVE POOL
B5/DB-AC
G Y6/DB-AC
F
A6
B9/DB-G
H
Purpose of issue
+4.85
J
Description
Rev
open to below
open to sky
Client:
Final Location as per Site
open to below
Master 42.0 m2
C R6/DB-A F
R9/DB-G
MR. MOHAMED YASIN FARUQE
K
Master 2 42.0 m
R8/DB-GF
A7
REFLECTIVE POOL OPEN TO SKY BALCONY 5 m2
Project Title:
edge of canopy
Covere
d Balco
PRIVATE VILLA (B+G+1+R) DUBAI HILLS, DUBAI, UAE PLOT NO.: - 6316624
2
ny 5 m
L edge of canopy
Consultant:
08
Main Contractor:
Subconsultant/ Subcontractor:
Drawing title:
FIRST FLOOR PLAN POWER LAYOUT
FIRST FLOOR PLAN
Note: Contractor should ensure necessary containment (Concealed PVC conduit/Cable Tray/Trunking/Junction boxes, etc.) for the following systems from specialist;1. Home Automation 2. Audio Video Intercom 3. CCTV 4. Surround Sound 5. SMATV
Original Scale
Drawn
Checked SP/SJ
1:100
Authorised
Date: AUG-2022
Date:
AUG-2022
Plot Size RK
SP/EL
Date:
AUG-2022
Sheet #
Project Number
460-22
EP-103
A1 Rev
00
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY.
315°
NE
N
NW
135°
02 03
04
05
06 07 09
10 11
12
13
225°
01
2. DO NOT SCALE FROM THE DRAWINGS.
SW
45°
SE
3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS. 6. ALL SUBMISSIONS AND DRAWINGS ARE FOLLOWING M/S DDA AND M/S EMAAR REGULATIONS. KEYPLAN:
A1
CANOPY
A B
A2 FIRE PIT
C
+8.60
OPEN TO SKY OPEN TO SKY
ROOF LOUNGE 42m2 +9.20
A3 Jacuzzi 6 m2
+8.90
RYB14/DB-FF
D
RYB13/DB-FF
For Jacuzzi
A4
R11/DB-GF For Lift
R8/DB-AC
RYB14/DB-AC
A5
Y11/DB-GF
2
00m
BBQ 2
E
RYB13/DB-AC
F
Description
Rev
+8.65
RYB15/DB-FF
Date
Checked
Authorized
Rev
Date
Authorized
For Heat Pump
OPEN TO SKY RYB12/DB-AC
SERVICE AREA
REFLECTIVE POOL
+8.60 RYB11/DB-AC
G
A6
2 C RYB
9/DB-A
/D RYB26
RYB15
For Booster Pump
REFLECTIVE POOL
/DB-AC
SERVIC .6 +8 0
For Heat Pump
B-AC
Booster Pump Control Panel
E
RYB1
For Solar Water Heater
RYB12/DB-FF
AREA B-AC
6/DB
RYB16/DB-FF
/DB-AC RYB21
C 0/DB-A
C For Circulation Pump
RYB16/DB-FF
K
Y8/DB
-AC RYB17
B11/DB-FF
/DB-A
-AC
RYB9/DB-AC
J
C 3/DB-A /DB-AC RYB2 RYB22
/DB-AC RYB25
B-AC
/D RYB24
/D RYB18
RYB10/DB-AC
RYB1
H
+8.60
Purpose of issue Client:
MR. MOHAMED YASIN FARUQE
A7
Project Title:
+9.45
L ENTRY FRAME
PRIVATE VILLA (B+G+1+R) DUBAI HILLS, DUBAI, UAE PLOT NO.: - 6316624
+8.25
CANOPY
Consultant:
08
ROOF FLOOR PLAN Main Contractor:
Subconsultant/ Subcontractor:
Drawing title: Note: Contractor should ensure necessary containment (Concealed PVC conduit/Cable Tray/Trunking/Junction boxes, etc.) for the following systems from specialist;1. Home Automation 2. Audio Video Intercom 3. CCTV 4. Surround Sound 5. SMATV
ROOF FLOOR PLAN POWER LAYOUT Original Scale
Drawn
Checked SP/SJ
1:100
Authorised
Date: AUG-2022
Date:
AUG-2022
Plot Size RK
SP/EL
Date:
AUG-2022
Sheet #
Project Number
460-22
EP-104
A1 Rev
00
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY.
315°
NE
225°
NW
N
2. DO NOT SCALE FROM THE DRAWINGS.
SW
45°
SE
3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
135°
6. ALL SUBMISSIONS AND DRAWINGS ARE FOLLOWING M/S DDA AND M/S EMAAR REGULATIONS. KEYPLAN:
DB-EX 6.76 KW
DB-FF 32.77 KW
DB-GF 18.10 KW
DB-BF 23.89 KW
DB-AC 63.39 KW
4CX50 mm2 XLPE/SWA/PVC 1CX25 mm2 PVC Y/G AS ECC 4CX16 mm2 XLPE/SWA/PVC 1CX16 mm2 PVC Y/G AS ECC 4CX10 mm2 XLPE/SWA/PVC 1CX10 mm2 PVC Y/G AS ECC 4CX16 mm2 XLPE/SWA/PVC 1CX16 mm2 PVC Y/G AS ECC
CM CHECK METER
4CX10 mm2 XLPE/SWA/PVC 1CX10 mm2 PVC Y/G AS ECC
CABLE GLAND
32A TP MCCB 25KA
40A TP MCCB 25KA
63A TP MCCB 25KA
63A TP MCCB 25KA
125A TP MCCB 25KA
300A, TP CU. BUSBAR 300A TP ISOLATOR
E-BAR
R
Y
B
Description
Rev 6M MIN. DISTANCE
EARTH PIT-1
NON FERROUS CABLE GLAND
4CX185 mm2 XLPE/SWA/PVC 1CX95 mm2 PVC Y/G AS ECC
Date
Checked
Authorized
Rev
Date
Authorized
MDB-01 TOTAL CONNECTED LOAD = 144.92 KW DIVERSITY FACTOR = 0.8 MAX. DEMAND = 123.18 KW LOC. : ELECTRICAL ROOM (EXTERNAL)
EARTH PIT-2
300/5A
kWHr kWHr METERING WITH 300/5A CT METER IP 65 GRP CABINET WITH PADLOCK
300A TP MCCB 45KA
Purpose of issue Client:
MR. MOHAMED YASIN FARUQE
CABLE BY DEWA FROM DEWA. Project Title:
PRIVATE VILLA (B+G+1+R) DUBAI HILLS, DUBAI, UAE PLOT NO.: - 6316624
SINGLE LINE DIAGRAM Consultant:
Main Contractor:
Subconsultant/ Subcontractor:
Drawing title: Note: Contractor should ensure necessary containment (Concealed PVC conduit/Cable Tray/Trunking/Junction boxes, etc.) for the following systems from specialist;1. Home Automation 2. Audio Video Intercom 3. CCTV 4. Surround Sound 5. SMATV
ELECTRICAL SINGLE LINE DIAGRAM Original Scale
Drawn
Checked SP/SJ
1:100
Authorised
Date: AUG-2022
Date:
AUG-2022
Plot Size RK
SP/EL
Date:
AUG-2022
Sheet #
Project Number
460-22
EP-105
A1 Rev
00
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY.
315°
NE
225°
NW
N
2. DO NOT SCALE FROM THE DRAWINGS.
SW
45°
SE
3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
135°
6. ALL SUBMISSIONS AND DRAWINGS ARE FOLLOWING M/S DDA AND M/S EMAAR REGULATIONS. KEYPLAN:
ABBREVIATIONS A A/C
AMPS AIR CONDITIONING
kW
KILO WATT KILO VOLT AMPERE LOW LEVEL
AC
ALTERNATING CURRENT
kVA L/L
ACB
AIR CIRCUIT BREAKER
LSF
LOW SMOKE AND FLAME
ADJ
ADJUSTABLE
LS0H
LOW SMOKE ZERO HALOGEN
AF
AMPERE FRAME SIZE
LTG
LIGHTING
AFF
AFTER FINISHED FLOOR
LV
LOW VOLTAGE
AHU
AIR HANDLING UNIT
LVP
LOW VOLTAGE PANEL
AL
ALUMINIUM
LVR
LOUVER
ALT
ALTERNATE
M
METER
ARCH
ARCHITECTURAL
M/C
MULTI CORE CABLE
ATS
AUTOMATIC TRANSFER SWITCH
MAX
MAXIMUM
AUTO
AUTOMATIC
MCB
MINIATURE CIRCUIT BREAKER
AVG
AVERAGE
MCC
MOTOR CONTROL CENTER
BC
BUS COUPLER
MCCB
MOULDED CASE CIRCUIT BREAKER
BTM
BOTTOM
MD
MAXIMUM DEMAND
C
CONDUIT
MDB
MAIN DISTRIBUTION BOARD
CAP
CAPACITOR BANK
CB
CIRCUIT BREAKER
MDF MECH
MAIN DISTRIBUTION FRAME MECHANICAL
CCU
CENTRAL COOKER UNIT
MET
MAIN EARTHING TERMINAL
CH
CHANDLIER
MFR
MANUFACTURER
COOKER HOOD EXTRACT FAN
MAN HOLE MULTI MODE
CHWP
CHILLED WATER PUMP
MH MM
CLG
CEILING
MIN
MINIMUM
CONCRETE
MIR
MIRROR LIGHT
CONN
CONNECTION
MISC
MISCELLANEOUS
CONT
CONTINUOUS
COS
CHANGE OVER SWITCH
MM² MO
SQUARE MILLIMETER MOTORIZED
CP
CONTROL PANEL
MTD
MOUNTED
CPU
CENTRAL PROCESSING UNIT
MV
MEDIUM VOLTAGE
CRT
CATHODE RAY TUBE
NO
NUMBER
CSP
CEILING SPEAKER
NOM
NOMINAL
CT
CURRENT TRANSFORMER
NTS
NOT TO SCALE
CU
COPPER
OH
OVER HEAD
DB
DISTRIBUTION BOARD
OPNG
OPENING
DED
DEDICATED
PB
PUSH BUTTON
DEWA
DUBAI ELECTRICITY AND WATER AUTHORITY
PE
PNEUMATIC ELECTRIC
DF
DIVERSITY FACTOR
PEND
PENDENT
DIC
DUBAI INTERNET CITY
PF
POWER FACTOR
DN
DOWN
PH
PENT HOUSE
DO
DUAL OUTLET
PRESS SW PRESSURE SWITCH
DWG
DRAWING
PS
PULL SWITCH
PTs
POTENTIAL TRANSFORMERS
PVC
POLY VINYL CHLORIDE
CHF
CONG
EB
ELECTRIC BELL
ECC
EARTH CONTINUITY CONDUCTOR
ELCB
EARTH LEAKAGE CIRCUIT BREAKER
ELEC
ELECTRICAL
ELR
EARTH LEAKAGE RELAY
ELS
EARTH LEAKAGE SENSOR
EM
EMERGENCY ONLY ESSENTIAL SERVICE
EMGEN
EMERGENCY GENERATOR-SAFETY SERVICE SOURCE
ENCL
ENCLOSURE
EP
ELECTRIC PNEUMATIC
ESMDB
EMERGENCY SUB MAIN DISTRIBUTION BOARD
ETP
ENERGY TRANSFER PUMP
EWC
ELECTRIC WATER COOLER
EXH
EXHAUST
EXP
EXPLOSION PROOF
FA
FIRE ALARM
FACP
FIRE ALARM CONTROL PANEL
FB
FLOOR BOX
FCU
FAN COIL UNIT
FIN
FINISH
FIXT
FIXTURE
FL
FLOOD LIGHT
FLR
FLOOR
R-Y-B
RED-YELLOW-BLUE
RCCB
RESIDUAL CURRENT CIRCUIT BREAKER
RCD
RESIDUAL CURRENT DEVICE
RM
ROOM
S/C
SINGLE CORE CABLE
S/O
SOCKET OUTLET
S/S
SUBSTATION
SECT
SECTION
SMDB
SUB MAIN DISTRIBUTION BOARD
SMR
SURFACE METAL RACEWAY
SQ²
SQUARE METER
SP
SINGLE POLE / PHASE
SPN
SINGLE POLE & NEUTRAL
STD
STANDARD
STL
STEEL
STOR
STORAGE
STRUCT
STRUCTURAL
SURF
SURFACE
SUSP
SUSPENDED
SW
SWITCH
SWA
STEEL WIRE ARMOUR
T/A TELE TEMP TER TERM TP TPN
G/Y
GREEN AND YELLOW
GI
GALVANIZED CONDUIT
GL
GROUND LIGHT
TR
TO ABOVE TELEPHONE TEMPERATURE TELEPHONE EQUIPMENT ROOM TERMINAL THREE PHASE / TRIPLE POLE TRIPLE POLE & NEUTRAL - OR THREE PHASE & NEUTRAL TRANSFORMER
GRD
GROUND
HGT
HEIGHT
TV TYP
TELEVISION TYPICAL
FLUOR
FLUORESCENT
FP
FIRE PROTECTION
FTN
FOUNTAIN
FU F/O
FUSE FIBRE OPTIC
HIAL
HIGH INTENSITY AIRCRAFT WARNING LIGHT
UG
UNDER GROUND
H/L
HIGH LEVEL
UV
UNIT VENTILATOR
HP HV
HORSE POWER HIGH VOLTAGE
VDT
VISUAL DISPLAY TERMINAL
Hz
HERTZ
WP
WEATHER PROOF
H/L
HIGH LEVEL
XLPE
CROSS LINKED POLYETHYLENE
IDF
INTERMEDIATE DISTRIBUTION FRAME
INST INSUL
INSTANTANEOUS INSULATION
ISO
ISOLATION SWITCH
JB
JUNCTION BOX
DRAWING LIST
SMATV LEGENDS SYM
DESCRIPTION SMA-TV Outlet with Radio Outlet SMA-TV Junction Box 12U Cabinet (600X12Ux150) (with 13A Twin Socket)
SHEET NO.
DRAWING NAME
SM-100
SMATV SYSTEM ABBREVIATIONS, LEGENDS AND NOTES
SM-101
BASEMENT FLOOR PLAN SMATV LAYOUT
SM-102
GROUND FLOOR PLAN SMATV LAYOUT
SM-103
FIRST FLOOR PLAN SMATV LAYOUT
SM-104
ROOF FLOOR PLAN SMATV LAYOUT
SM-105
SMATV SCHEMATIC RISER DIAGRAM
GENERAL NOTES 1. 2.
CONCEALED 25mmØ CONDUIT TO BE PROVIDED FOR EACH OUTLET. ALL HORIZONTAL CABLE TO HAVE 25mm CONDUIT FOR EACH OUTLET RUNNING FROM WALL OUTLET TO THE 12Ux600x150mm CABINET THROUGH 100x50mm HDGI CABLE TRAY. 3. PROVIDE CONCEALED 2x50mmØ CONDUIT FOR VERTICAL RISER (TYPICAL) TO 12U CABINET. 4. ALL CABLES SHOULD PULL TO 12U CABINET THROUGH PULL BOX IN EACH FLOOR. 5. PROVIDE 13A TWIN SOCKET INSIDE THE 12U CABINET. 8. CONTRACTOR MUST CONTACT SPECIALIST IN ORDER TO COMPLETE SMATV SYSTEM. 9. CONTRACTOR/SPECIALIST SHOULD REFER TO PROJECT SPECIFICATION IN ORDER TO INSTALL SMATV SYSTEM. 10. CATV OR SMATV OUTLETS SHALL BE CAPABLE OF DISPLAYING THE AV SIGNALS FROM AV SYSTEM AFTER INTERFACING. REFER TO SPECIFICATION FOR LOW CURRENT SYSTEMS.
Description
Rev
Purpose of issue
Date
Checked
Authorized
Rev
Date
Authorized
Client:
MR. MOHAMED YASIN FARUQE
Project Title:
PRIVATE VILLA (B+G+1+R) DUBAI HILLS, DUBAI, UAE PLOT NO.: - 6316624 Consultant:
Main Contractor:
Subconsultant/ Subcontractor:
Drawing title:
SMATV ABBREVIATIONS, LEGENDS & NOTES Original Scale
Drawn
Checked SP/SJ
NTS
Authorised
Date: AUG-2022
Date:
AUG-2022
Project Number
460-22
Plot Size RK
SP/EL
Date:
AUG-2022
A1
Sheet #
Rev
SM-100
00
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY.
315°
02 03
04
05
06 07 09
10 11
12
NE
135°
01
NW
N
P
45°
3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER.
13
225°
2. DO NOT SCALE FROM THE DRAWINGS.
SW
L OT
SE
I MI T
P
L OT L
MI
T
L I
4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS. 6. ALL SUBMISSIONS AND DRAWINGS ARE FOLLOWING M/S DDA AND M/S EMAAR REGULATIONS. KEYPLAN:
PUMPROOM & BALANCE TANK
Maneuvering Parking
A1
A B TV
DRIVER'S
TOILET
A2
Final Location as per Site
-3.20
C
SHOW GARAGE 192 m2 1.0463
-3.15
-3.18
MAID'S 19 m2
ENTRANCE
A3
-3.15
A SHISH E LOUNG 20 m2
D
N SUNKE EN GARD
A4
A5 Final Location as per Site
E
-3.20
KIT
F
Date
Checked
Authorized
Rev
Date
Authorized
-3.20
SERVICE ENTRANCE
G
Description
Rev
Concealed SMATV Jn.
A6
-3.15 Box (30x30x15cm) W/P -3.15
H
50mmØ PVC Conduits for SMATV Cables
ELEC. 6 m2 SERVICE ENTRANCE
J
MECHANICAL 12 m2
LAUNDRY 12 m2
G GAMIN M O O R N OPE 26 m2
Purpose of issue Client:
K
A CINEM 2 25.0 m 00 WID
E
INDY50
0 WIDE
INDY50
0 WIDE
WATER TANK 12 m2
INDY5
-3.15
A7
Final Location as per Site
MR. MOHAMED YASIN FARUQE
N SCREE
PUMP ROOM & BALANCETANK 13 m2
Project Title:
L
PRIVATE VILLA (B+G+1+R) DUBAI HILLS, DUBAI, UAE PLOT NO.: - 6316624 Consultant:
P
08
L I
MI
L OT
T
MI
P
T
L I Main Contractor:
Subconsultant/ Subcontractor:
Drawing title:
BASEMENT FLOOR PLAN
BASEMENT FLOOR PLAN SMATV LAYOUT Original Scale
Drawn
Checked SP/SJ
1:100
Authorised
Date: AUG-2022
Date:
AUG-2022
Project Number
460-22
Plot Size RK
SP/EL
Date:
AUG-2022
A1
Sheet #
Rev
SM-101
00
L OT
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY.
315°
L OT
02 03 SUNKEN 04
05
LOUNGE
06 07 09 JACUZZI
10 11
FIRE PLACE
FIRE PIT +0.45
12
13
NE
135°
01
SWIMMING POOL
+0.45
NW
N
P
45°
P
3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER.
225°
2. DO NOT SCALE FROM THE DRAWINGS.
SW
L OT
SE
I MI T
PARKW A ENTRA Y NCE
L
MI
T
L I
4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS. 6. ALL SUBMISSIONS AND DRAWINGS ARE FOLLOWING M/S DDA AND M/S EMAAR REGULATIONS.
-1.35
+0.40
KEYPLAN: -0.20
+0.20
+0.35
+0.35
-0.20
OUTDOOR LIVING 57.0 m2
A
A1
COUNTER
B
+0.40 -3.20
-0.20
BBQ
A2
C +0.35
OPEN TO SKY
OPEN TO ABOVE
SHOW KITCHEN 30.0 m2
LIVING
55.0 m
2
TV
Final Location as per Site
D
A3
en Sunk n Garde
+0.40
E
BANQUETING AREA 6.20m2
DINING 37.0 m2
TOILET 4.30 m2
A5 SUITE GUEST 2 m .0 6 2
F
OPEN TO SKY
H
J TOILET 8.50 m2
Checked
Authorized
Rev
Date
Authorized
A6 Jn. MATV aled S Conce 30x15cm) 0x Box (3
+0.35
FOYER 14.0 m2
Purpose of issue SUITE GUEST 2 28.0 m
+0.40 SIDE ENTRANCE
SIDE ENTRANCE
Date
+0.45
+0.45
K
Description
Rev -3.20
duits C Con mØ PV asement m 0 5 f o B 2 No.s ables to ATV C for SM
PANTRY
Final Location as per Site
REFLECTIVE POOL
CHEF'S KITCHEN 14.40 m2
G
A4
Client:
SUITE GUEST 2 .0 30 m REFLECTIVE POOL
MAIN ENTRANCE
A7
Project Title:
-0.20
L
MR. MOHAMED YASIN FARUQE
+0.40
PRIVATE VILLA (B+G+1+R) DUBAI HILLS, DUBAI, UAE PLOT NO.: - 6316624
+0.35
+0.35 GARBA GE RM ELECT. RM. +7.66 UTILITY FFL ROOM+7.66
Consultant:
FFL
MI
08
L OT
0.00
0.00 +0.05
T
P 0.00
MI
LPG M ETER
L I
L OT
L I
+0.35 -0.05
P
T
GATE LEVEL 0.00
Main Contractor:
DRIVEWAY
Subconsultant/ Subcontractor:
Drawing title:
ROAD
GROUND FLOOR PLAN
GROUND FLOOR PLAN SMATV LAYOUT Original Scale
Drawn
Checked SP/SJ
1:100
Authorised
Date: AUG-2022
Date:
AUG-2022
Project Number
460-22
Plot Size RK
SP/EL
Date:
AUG-2022
A1
Sheet #
Rev
SM-102
00
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY.
315°
NE
225°
NW
N
2. DO NOT SCALE FROM THE DRAWINGS.
SW
45°
SE
3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
135°
6. ALL SUBMISSIONS AND DRAWINGS ARE FOLLOWING M/S DDA AND M/S EMAAR REGULATIONS.
01
02 03
04
05
06 07 09
10 11
12
KEYPLAN:
13
edge of canopy
edge of canopy
A1
Semi-Covered Balcony 11 m2 +4.80
A B
limit of pergola TERRACE 30 m2
A2 FAMILY ROOM 24.0 m2
C Master 42.0 m2
OPEN TO SKY OPEN TO SKY
open to sky
open to below
A3 Final Location as per Site
+4.85
D
SUITE GUEST 2 27.0 m
A4 Date
Checked
Authorized
Rev
Date
Authorized
open to below
E F
OPEN TO SKY
SUITE GUEST 2 28.0 m
REFLECTIVE POOL
G
A6
H +4.85
J
K
Description
Rev
A5
open to sky
open Master 42.0 m2
Final Location asto per Site below
Purpose of issue
for le Tray DI Cab /L G H m H @ 100m Cables SMATV
Client:
ATV for SM ch abinet r, Swit 12U C e fi li p r Am S/M fo
2 No.s of 50mmØ PVC Conduits for SMATV Cables from Roof
SIDE ENTRANCE
MR. MOHAMED YASIN FARUQE Master 2 42.0 m
REFLECTIVE POOL OPEN TO SKY BALCONY 5 m2
MAIN ENTRANCE
A7
Project Title:
Final Location as per Site
PRIVATE VILLA (B+G+1+R) DUBAI HILLS, DUBAI, UAE PLOT NO.: - 6316624
edge of canopy 2
ny 5 m
d Balco Covere
L Consultant: edge of canopy
08
Main Contractor:
Subconsultant/ Subcontractor:
Drawing title:
FIRST FLOOR PLAN SMATV LAYOUT Original Scale
Drawn
Checked SP/SJ
1:100
FIRST FLOOR PLAN
Authorised
Date: AUG-2022
Date:
AUG-2022
Project Number
460-22
Plot Size RK
SP/EL
Date:
AUG-2022
A1
Sheet #
Rev
SM-103
00
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY.
315°
NE
N
NW
135°
02 03
04
05
06 07 09
10 11
12
13
225°
01
2. DO NOT SCALE FROM THE DRAWINGS.
SW
45°
SE
3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS. 6. ALL SUBMISSIONS AND DRAWINGS ARE FOLLOWING M/S DDA AND M/S EMAAR REGULATIONS. KEYPLAN:
A1
CANOPY
A B
A2 FIRE PIT
C
+8.60
OPEN TO SKY OPEN TO SKY
ROOF LOUNGE 42m2 +9.20
A3 Jacuzzi 6 m2
+8.90 W/P
D
A4
A5 2
00m
BBQ 2
E
Description
Rev
W/P
Date
Checked
Authorized
Rev
Date
Authorized
+8.65
F
OPEN TO SKY SERVICE AREA
REFLECTIVE POOL
+8.60
G
A6 +8.60
H
onduits PVC C Roof 0mmØ m 5 o f fr o s .s le ab 2 No ATV C for SM Jn. MATV aled S cm) W/P e c n o C 5 0x30x1 Box (3 2x100mmØ UPVC Sleeves in Slab for SMATV Cables
J DISH - 1
K
DISH - 2 LNB
1000x1000x500mm FIXED FOUNDATION (CONCRETE) FOR DISH ANTENNA
REFLECTIVE POOL
Client:
DISH - 3 LNB
120cm dia (Typ)
SIDE ENTRANCE
Purpose of issue
1000x1000x500mm FIXED FOUNDATION (CONCRETE) FOR DISH ANTENNA
LNB
E ARE
SERVIC +8.60
A
MR. MOHAMED YASIN FARUQE
4Nos. RG 11 CABLE (Typ)
1000x1000x500mm FIXED FOUNDATION (CONCRETE) FOR DISH ANTENNA
A7
MAIN ENTRANCE DISH LOCATION TO BE CO-ORDINATED WITH OTHER SERVICES
Project Title:
PRIVATE VILLA (B+G+1+R) DUBAI HILLS, DUBAI, UAE PLOT NO.: - 6316624
+9.45
L ENTRY FRAME
+8.25
Consultant: CANOPY
08
ROOF FLOOR PLAN
Main Contractor:
Subconsultant/ Subcontractor:
Drawing title:
ROOF FLOOR PLAN SMATV LAYOUT Original Scale
Drawn
Checked SP/SJ
1:100
Authorised
Date: AUG-2022
Date:
AUG-2022
Project Number
460-22
Plot Size RK
SP/EL
Date:
AUG-2022
A1
Sheet #
Rev
SM-104
00
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY.
315°
4Nos. RG11 CABLE
4Nos. RG11 CABLE
1000x1000x500mm FIXED FOUNDATION (CONCRETE) FOR DISH ANTENNA
1000x1000x500mm FIXED FOUNDATION (CONCRETE) FOR DISH ANTENNA
4Nos. RG11 CABLE
4Nos. RG11 CABLE
N
NE
135°
4Nos. RG11 CABLE
LNB
NW
LNB
225°
LNB
2. DO NOT SCALE FROM THE DRAWINGS.
SW
45°
SE
3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS. 6. ALL SUBMISSIONS AND DRAWINGS ARE FOLLOWING M/S DDA AND M/S EMAAR REGULATIONS. KEYPLAN:
FM ANTENA 1000x1000x500mm FIXED FOUNDATION (CONCRETE) FOR DISH ANTENNA 4Nos. RG11 CABLE
HH
VH VL
HH- HORIZONTAL HIGH HL- HORIZONTAL LOW VH- VERTICAL HIGH VL- VERTICAL LOW
HL
HH VH VL
HL
HH- HORIZONTAL HIGH HL- HORIZONTAL LOW VH- VERTICAL HIGH VL- VERTICAL LOW
HH VH VL
HL
HH- HORIZONTAL HIGH HL- HORIZONTAL LOW VH- VERTICAL HIGH VL- VERTICAL LOW
ROOF FLOOR
Carried in 100x50mm HDGI Cable Tray Riser-Refer Drawings 12U CABINET
IN Terr. 47-862 MHz
1 Vert-Low SAT A
2 Horz-Low SAT A
3 Vert-High SAT A
4 Horz-High SAT A
1 Vert-Low SAT B
SAT SYSTEM I
Slope
2 Horz-Low SAT B
3 Vert-High SAT B
4 Horz-High SAT B
1 Vert-Low SAT B
SAT SYSTEM II
17 x 17 MULTISWITCH AMPLIFIER
2 Horz-Low SAT B
3 Vert-High SAT B
4 Horz-High SAT B
1 Vert-Low SAT B
2 Horz-Low SAT B
SAT SYSTEM III
3 Vert-High SAT B
4 Horz-High SAT B
SAT SYSTEM IV
Gain SAT: 950-2500 MHz 11-18 TER: 88-862 MHz 12-14
(+15 dB)
POWER SUPPLY UNIT
230V, 50Hz, POWER SUPPLY IN
Gain
SAT SYSTEM I
(SMATV Socket in 20mmØ PVC Conduit-Total 17No.s)
IN Terr. 47-862 MHz
Vert-Low SAT A 1
Horz-Low SAT A 2
Vert-High SAT A 3
SAT SYSTEM II Horz-High SAT A 4
Vert-Low SAT B 1
Horz-Low SAT B 2
Vert-High SAT B 3
SAT SYSTEM III Horz-High SAT B 4
Vert-Low SAT B 1
Horz-Low SAT B 2
Vert-High SAT B 3
SAT SYSTEM IV Horz-High SAT B 4
Vert-Low SAT B 1
Horz-Low SAT B 2
Vert-High SAT B 3
Horz-High SAT B 4
89 dB
230V, 50Hz, POWER SUPPLY IN
12V ADAPTOR IN Terr. 47-862 MHz
Signal Loss @ Permitted level
1 Vert-Low SAT A
2 Horz-Low SAT A
3 Vert-High SAT A
4 Horz-High SAT A
1 Vert-Low SAT B
SAT SYSTEM I
01
2 Horz-Low SAT B
3 Vert-High SAT B
4 Horz-High SAT B
1 Vert-Low SAT B
SAT SYSTEM II
2 Horz-Low SAT B
3 Vert-High SAT B
4 Horz-High SAT B
1 Vert-Low SAT B
SAT SYSTEM III
2 Horz-Low SAT B
3 Vert-High SAT B
4 Horz-High SAT B
SAT SYSTEM IV
02
03
17 x 17 x 24 SPLITTER MULTI SWITCH
05
3 No.s RG-11 CABLE TO EACH TV POINT RUNNING THROUGH 25mmØ CONDUIT (TYP)
Signal Loss @ Permitted level
04
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
Description
Rev
Date
Checked
Authorized
Rev
Date
Authorized
22
23
SAT SYSTEM I
IN Terr. 47-862 MHz
Vert-Low SAT A 1
Horz-Low SAT A 2
Vert-High SAT A 3
SAT SYSTEM II Horz-High SAT A 4
Vert-Low SAT B 1
Horz-Low SAT B 2
Vert-High SAT B 3
(-3 dB) Horz-High SAT B 4
Vert-Low SAT B 1
SAT SYSTEM III Horz-Low SAT B 2
Vert-High SAT B 3
24
SAT SYSTEM IV Horz-High SAT B 4
Vert-Low SAT B 1
Horz-Low SAT B 2
Vert-High SAT B 3
Horz-High SAT B 4
1ST FLOOR
Purpose of issue Client:
2x50mmØ PVC Conduits to TJB in Ground Floor
100x50mm HDGI Cable Tray Riser
MR. MOHAMED YASIN FARUQE
Project Title:
PRIVATE VILLA (B+G+1+R) DUBAI HILLS, DUBAI, UAE PLOT NO.: - 6316624
3 No.s RG-11 CABLE TO EACH TV POINT RUNNING THROUGH 25mmØ CONDUIT (TYP) Consultant:
GROUND FLOOR 2x50mmØ PVC Conduits to TJB in Ground Floor
Main Contractor:
Note: The schematic is typical for SMATV System. Contractor has to approach system specialist to obtain new technology drawings to comply with SMATV Specifications.
3 No.s RG-11 CABLE TO EACH TV POINT RUNNING THROUGH 25mmØ CONDUIT (TYP)
BASEMENT FLOOR SMATV SCHEMATIC RISER DIAGRAM
Subconsultant/ Subcontractor:
Drawing title:
SMATV SCHEMATIC RISER DIAGRAM Original Scale
Drawn
Checked SP/SJ
NTS
Authorised
Date: AUG-2022
Date:
AUG-2022
Project Number
460-22
Plot Size RK
SP/EL
Date:
AUG-2022
A1
Sheet #
Rev
SM-105
00
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY.
315°
NE
225°
NW
N
2. DO NOT SCALE FROM THE DRAWINGS.
SW
45°
SE
3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
135°
6. ALL SUBMISSIONS AND DRAWINGS ARE FOLLOWING M/S DDA AND M/S EMAAR REGULATIONS. KEYPLAN:
ABBREVIATIONS ADJ
ADJUSTABLE
AFF AL ALT ARCH AUTO AVG
AFTER FINISHED FLOOR ALUMINIUM ALTERNATE ARCHITECTURAL AUTOMATIC AVERAGE
BTM
CEILING CONCRETE CONTINUOUS CONTROL PANEL CENTRAL PROCESSING UNIT
CSP CU
CEILING SPEAKER COPPER
EM EMGEN ENCL EXP
FA FACP
MAX MD
MAXIMUM MAXIMUM DEMAND
MECH
MECHANICAL
MFR MH MIN MM² MTD MF
MANUFACTURER MANHOLE MINIMUM SQUARE MILLIMETER MOUNTED MAKEUP FAN
NO NOM NTS
NUMBER NOMINAL NOT TO SCALE
OPNG
OPENING
PEND PH
PENDANT PENTHOUSE
RM
ROOM
SECT SQ² STD STL STOR STRUCT SURF SUSP SEF
SECTION SQUARE METER STANDARD STEEL STORAGE STRUCTURAL SURFACE SUSPENDED SMOKE EXTRACT FAN
TEL TEMP TERM TV TYP
TELEPHONE TEMPERATURE TERMINAL TELEVISION TYPICAL
1. 2. 3. 4. 5. 6. 7. 8. 9.
BOTTOM
CLG CONG CONT CP CPU
DED DN DWG
GENERAL NOTES
DEDICATED DOWN DRAWING
EMERGENCY ONLY ESSENTIAL SERVICE EMERGENCY GENERATOR-SAFETY SERVICE SOURCE ENCLOSURE EXPLOSION PROOF
FIRE ALARM FIRE ALARM CONTROL PANEL
FCU FIN
FAN COIL UNIT FINISH
FLR FP FTN FU
FLOOR FIRE PROTECTION FOUNTAIN FUSE
GRD
GROUND
HGT
HEIGHT
H/L
HIGH LEVEL
INST INSUL
INSTANTANEOUS INSULATION
UG UV
UNDER GROUND UNIT VENTILATOR
10. 11. 12.
13. 14. 15. 16.
9. 10. 11.
12. 13. 14.
25mm CONDUIT TO BE PROVIDED FOR EACH OUTLET. ALL HORIZONTAL CABLE TO HAVE 25mm CONDUIT FOR EACH OUTLET RUNNING FROM WALL OUTLET TO THE 12Ux600x150mm CABINET. PROVIDE 2x50mmØ CONDUIT FOR VERTICAL RISER (TYPICAL). ALL CABLES SHOULD PULL TO 12U CABINET THROUGH PULL BOX IN EACH FLOOR. PROVIDE 13A TWIN SOCKET FROM SEPERATE CIRCUIT& BREAKER INSIDE THE 12U CABINET. STRUCTURED CABLING WORK SHALL BE CARRIED OUT AS PER TRA'S REQUIREMENTS. PROVIDE MANHOLE INSIDE THE PLOT FOR DISTRIBUTION. CONTRACTOR SHOULD FURNISH FTTH (FIBER TO THE HOME) AND STRUCTURED CABLING SYSTEM (SCS) WITHIN THE VILLA. ONT TERMINATION BOX : CONTRACTOR SHOULD PROVIDE SECURED INDOOR ONT BOX OF SIZE (60X12UX15cm DEPTH) TO HOUSE THE OPTICAL NETWORK UNIT (ONU), POWER SOCKET AND PATCH PANEL/IDC MODULES. THE CABINET SHALL BE POSITIONED IN A SECURED PLACE AT A HEIGHT OF 120cm ABOVE FFL. THE LOCATION SHALL BE SUITABLE FOR TECHNICIAN'S ACCESS. 2NOS. OF 13A SOCKETS ARE TO BE PROVIDED INSIDE THE 12U CABINET. RJ 45 SOCKET ARE TO BE INSTALLED FOR TELEPHONE/DATA AND E-VISION OUTLET. DISTRIBUTION OF CABLES WITHIN VILLA:- INSTALL 4PAIR (8CORE) CAT-6 UNSHIELDED TWISTED PAIR (UTP) CABLES, INDIVIDUALLY AND CONTINUOUSLY FROM EACH SOCKET UP TO THE ONT TERMINATION BOX WITH AN EXTRA LENGTH OF 0.5METRE AT THE SOCKETS AND 3 METER AT THE PULL BOX. MAINTAIN MINIMUM 1 METER CLEARANCE BETWEEN TELECOM SERVICE AND OTHER SERVICES. DO NOT PASS OR RUN OTHER SERVICES THROUGH TELEPHONE ROOMS, JOINT BOXES, MANHOLES AND DUCTS. MANHOLES FOR THE INTERNAL CABLES ARE TO BE MADE WATERTIGHT AND CABLES TO BE PLACED THROUGH FLEXIBLE HOSE. UNLESS OTHERWISE SPECIFIED ALL TELEPHONE MANHOLES SHOULD BE 60X60X90cm WITH GRADE 'A' HEAVY DUTY COVER. INDICATION MARKING ''TELEPHONE'' TO BE ENGRAVED ON THE COVER AND THE BODY VISIBLY. PROVIDE 6mmØ NYLON ROPE INSIDE ALL UNDER GROUND DUCTS. PROVIDE SEPARATE EARTHING TO TELECOM SYSTEM AND THE RESISTANCE SHOULD BE LESS THAN ONE OHM . COMPONENTS, DUCTS, CONDUITS, CABLE TRAYS, SPLITTER BOXES, SOCKETS ETC. SHOWN IN THE DRAWING FOR TELEPHONE, TELEVISION AND DATA ARE FOR THE EXCLUSIVE USE OF TELECOM SYSTEM ONLY. CONTRACTOR MUST CONTACT AUTHORITY PLANNING SECTION AT LEAST THREE MONTHS BEFORE STARTING ANY INTERLOCKING WORK. EXTREME CARE IS TO BE TAKEN WHILE WORKING NEAR TO AUTHORITY PLANT AND IT SHOULD NOT BE DISTURBED UNDER ANY CIRCUMSTANCE. ALL FIBER CABLE MUST BE TERMINATED AND TESTED BEFORE REQUESTING FOR INSPECTION FROM AUTHORITY.
TELECOM LEGENDS
SYM
DESCRIPTION Single RJ45 Telephone Socket CA-TV Outlet (RJ45) Dual RJ45 Telephone Socket
Wi-Fi
RJ45 Single outlet for Wi-Fi @ Ceiling Level RJ45 Single outlet + 2 No. USB Power + 13A Power Socket Near Bed 12U Consolidation Cabinet (600X12Ux300) (with 13A Twin fed from Dedicated Circuit Breaker, RJ 45 - 24 Ports Patch Panels, Lockable & Perforated Front Door) 12U Cabinet to be earthed.
TJB - Telephone Junction Box uPVC Sleeves
DRAWING LIST Description
Rev
SHEET NO.
Date
Checked
Authorized
Rev
Date
Authorized
DRAWING NAME
TL-100
TELECOMMUNICATION SYSTEM ABBREVIATIONS, LEGENDS & NOTES
TL-101
SITE SETTING-OUT PLAN TELECOMMUNICATION SYSTEM
TL-102
BASEMENT FLOOR PLAN TELECOMMUNICATION SYSTEM
TL-103
GROUND FLOOR PLAN TELECOMMUNICATION SYSTEM
TL-104
FIRST FLOOR PLAN TELECOMMUNICATION SYSTEM
TL-105
ROOF FLOOR PLAN TELECOMMUNICATION SYSTEM
TL-106
TELECOMMUNICATION SCHEMATIC RISER DIAGRAM
Purpose of issue Client:
MR. MOHAMED YASIN FARUQE VDT
VISUAL DISPLAY TERMINAL
WP
WEATHER PROOF
W/M
WALL MOAUNTED
XLPE
CROSS LINKED POLYETHYLENE
ZCV
ZONE CONTROLE VALVE
Project Title:
PRIVATE VILLA (B+G+1+R) DUBAI HILLS, DUBAI, UAE PLOT NO.: - 6316624 Consultant:
Main Contractor:
Subconsultant/ Subcontractor:
Drawing title:
TELECOMMUNICATION SYSTEM ABBREVIATIONS, LEGENDS & NOTES Original Scale
Drawn
Checked SP/SJ
NTS
Date:
Authorised
AUG-2022
Date:
AUG-2022
Project Number
460-22
Plot Size RK
SP/EL
Date:
AUG-2022
A1
Sheet #
Rev
TL-100
00
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY.
315°
NE
NW
N
4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
135°
6. ALL SUBMISSIONS AND DRAWINGS ARE FOLLOWING M/S DDA AND M/S EMAAR REGULATIONS.
L OT L
P
225°
3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER.
T
MI L I
2. DO NOT SCALE FROM THE DRAWINGS.
SW
45°
SE
P
L OT
I MI T
KEYPLAN:
01
02 03
04
05
06 07 09
+0.45
10 11
+0.45
12
13
-1.35
+0.40
-0.20
+0.20
+0.35
+0.35
-0.20
OUTDOOR LIVING 57.0 m2
A
A1
COUNTER
B
+0.40 -3.20
-0.20
BBQ
A2
C +0.35
OPEN TO ABOVE
SHOW KITCHEN 30.0 m2
LIVING
55.0 m
2
A3
TV
D
en Sunk n d Gar e
TOILET 4.30 m2 +0.40
E
BANQUETING AREA 6.20m2
DINING 37.0 m2
Description
Rev
Date
Checked
Authorized
Rev
Date
Authorized
A4
A5 SUITE GUEST 2 26.0 m
F
OPEN TO SKY
Purpose of issue
-3.20
Client: CHEF'S KITCHEN 14.40 m2
G H
MR. MOHAMED YASIN FARUQE
A6
2W D56 DUCTS TO VILLA CABINET INSIDE GROUND FLOOR SLAB WITH 6mm NYLON PULL ROPE
+0.45
+0.45
J PANTRY 2W D56 DUCTS TO VILLA CABINET INSIDE GROUND FLOOR SLAB WITH 6mm NYLON PULL ROPE
K
+0.40
TOILET 8.50 m2
Project Title:
+0.35
FOYER 14.0 m2
PRIVATE VILLA (B+G+1+R) DUBAI HILLS, DUBAI, UAE PLOT NO.: - 6316624
SUITE GUEST 2 28.0 m
ENTERING TO GROUND FLOOR SLAB, OPENING SHOULD BE PROPERLY CLOSED.
SUITE GUEST 2 30.0 m
MAIN ENTRANCE
A7 Consultant:
+0.40
-0.20
L
+0.35
2W D56 DUCTS TO VILLA CABINET AT 600mm LEVEL BELOW GROUND FLOOR WITH 6mm NYLON PULL ROPE. PROTECTED BY A CONCRETE LAYER IN DRIVEWAY AREAS.
+0.35
+7.66 FFL
0.00
1.0000
+0.05
MI
T
P
0.00
MI
0.00
2W D56 DUCTS TO VILLA CABINET AT 600mm LEVEL BELOW GROUND FLOOR EXTENDED 1M OUTLPOF G METE R PLOT LIMIT WITH 6mm NYLON PULL ROPE
08
L OT
L I
+0.35 -0.05 60x60x80 MANHOLE FOR ENTRY CABLE
P
E: 493020.753 T N: 2780348.848
Main Contractor:
ELECT. RM.
L I
GARBA GE RM +7.66 FFL
Subconsultant/ Subcontractor: 0.00
Drawing title:
SITE SETTING-OUT PLAN TELECOMMUNICATION SYSTEM Original Scale
Drawn
Checked SP/SJ
1:100
Authorised
Date: AUG-2022
Date:
AUG-2022
Plot Size RK
SP/EL
Date:
AUG-2022
Sheet #
Project Number
460-22
TL-101
A1 Rev
00
L OT
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY.
315°
SE
NE
45°
P
N
P
NW
L OT
I MI T 135°
01
02 03
04
05
06 07 09
10 11
12
225°
SW
L
MI
T
L I
L OT
2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS. 6. ALL SUBMISSIONS AND DRAWINGS ARE FOLLOWING M/S DDA AND M/S EMAAR REGULATIONS.
13
KEYPLAN:
PUMPROOM & BALANCE TANK
Maneuvering Parking
A1
A B TV
TOILET
A2
DRIVER'S -3.20
C
SHOW GARAGE 192 m2 -3.15
-3.18
MAID'S 19 m2
ENTRANCE
A3
-3.15
A SHISH E G N U LO 20 m2
D
N SUNKE EN GARD
A4
A5 Description
Rev
E
Date
Checked
Authorized
Rev
Date
Authorized
Wi-Fi
-3.20
KIT
F -3.20
SERVICE ENTRANCE
G
A6
-3.15
H
-3.15
Wi-Fi
Recessed Telephone Jn. Box (30x30x15cm)
ELEC. 6 m2 SERVICE ENTRANCE
J
MECHANICAL 12 m2
LAUNDRY 12 m2
TJB
Purpose of issue
2x50mmØ PVC Conduits from above in H/L Slab
K
Client:
G GAMIN M OO R N E OP 26 m2
MR. MOHAMED YASIN FARUQE
A CINEM 2 25.0 m INDY50
INDY5
00 WID
E
00 INDY5
WIDE
WATER TANK 12 m2
A7
0 WIDE
-3.15
N SCREE
PUMP ROOM & BALANCETANK 13 m2
Project Title:
PRIVATE VILLA (B+G+1+R) DUBAI HILLS, DUBAI, UAE PLOT NO.: - 6316624
L
Consultant:
E: 492994.449 N: 2780321.432
P
08
L I
MI
L OT
T
MI
P
T
L I Main Contractor:
Subconsultant/ Subcontractor:
Drawing title:
BASEMENT FLOOR PLAN TELECOMMUNICATION SYSTEM
BASEMENT FLOOR PLAN
Original Scale
Drawn
Checked SP/SJ
1:100
Authorised
Date: AUG-2022
Date:
AUG-2022
Plot Size RK
SP/EL
Date:
AUG-2022
Sheet #
Project Number
460-22
TL-102
A1 Rev
00
L OT
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY.
315°
SE
NE
45°
L OT
N
P
05
06 07 09
10 11
12
135°
04
NW
02 03
13
225°
SW
I MI T
01
2. DO NOT SCALE FROM THE DRAWINGS.
L
P
L OT
T
MI L I
3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS. 6. ALL SUBMISSIONS AND DRAWINGS ARE FOLLOWING M/S DDA AND M/S EMAAR REGULATIONS.
+0.45
+0.45
-1.35
+0.40
KEYPLAN:
-0.20
+0.20
+0.35
+0.35
-0.20
OUTDOOR LIVING 57.0 m2
A
A1
COUNTER
B
+0.40 -3.20
-0.20
BBQ
A2 Wi-Fi
W/P
C
Wi-Fi
+0.35
OPEN TO ABOVE
SHOW KITCHEN 30.0 m2
LIVING
55.0 m
2
A3
TV
D
en Sunk n Garde
TOILET 4.30 m2 +0.40
E
BANQUETING AREA 6.20m2
DINING 37.0 m2
A4
A5 SUITE GUEST 2 26.0 m
Description
Rev
F
OPEN TO SKY
CHEF'S KITCHEN 14.40 m2
G
Date
Checked
Authorized
Rev
Date
Authorized
-3.20
Wi-Fi
A6
Wi-Fi
H H/L
+0.45TV Point, final
+0.45
Location as per Site
J PANTRY
K
TOILET 8.50 m2
+0.35
FOYER 14.0 m2
Purpose of issue
SUITE GUEST 2 28.0 m
+0.40
Client:
SUITE GUEST 2 m .0 0 3
MAIN ENTRANCE
MR. MOHAMED YASIN FARUQE
A7
+0.40
Project Title: -0.20
L
PRIVATE VILLA (B+G+1+R) DUBAI HILLS, DUBAI, UAE PLOT NO.: - 6316624
+0.35
+0.35
+7.66 FFL
+0.35
MI
08
L OT
-0.05
P
T
0.00
0.00 +0.05
T
P LPG M
ETER
0.00
MI
L OT
L I
Consultant:
ELECT. RM.
L I
GARBA GE RM +7.66 FFL
0.00
Main Contractor:
Subconsultant/ Subcontractor:
Drawing title:
ROAD
GROUND FLOOR PLAN
GROUND FLOOR PLAN TELECOMMUNICATION SYSTEM Original Scale
1:100
Drawn
Checked SP/SJ
Authorised
Date: AUG-2022
Date:
AUG-2022
Plot Size RK
SP/EL
Date:
AUG-2022
Sheet #
Project Number
460-22
TL-103
A1 Rev
00
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY.
315°
NE
225°
NW
N
2. DO NOT SCALE FROM THE DRAWINGS.
SW
45°
SE
3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
135°
6. ALL SUBMISSIONS AND DRAWINGS ARE FOLLOWING M/S DDA AND M/S EMAAR REGULATIONS. KEYPLAN:
01
02 03
04
05
06 07 09
10 11
12
13
edge of canopy
edge of canopy
A1
Semi-Covered Balcony 11 m2 +4.80
A B
limit of pergola TERRACE 30 m2
A2 FAMILY ROOM 24.0 m2
C Master 42.0 m2 open to below
OPEN TO SKY open to sky
A3
Final Location as per Site
TV Point, final Location as per Site
Wi-Fi
+4.85
D
SUITE GUEST 2 27.0 m
TV Point, final Location as per Site
A4 Description
Rev
Date
Checked
Authorized
Rev
Date
Authorized
A5 open to below
E F
Recessed Telephone Jn. Box (30x30x15cm)
OPEN TO SKY
TJB
2x50mmØ PVC Conduits from above in H/L Slab
SUITE GUEST 2 28.0 m
G
A6 Purpose of issue
H
Client: +4.85 Wi-Fi
J
open to sky
Master 42.0 m2
MR. MOHAMED YASIN FARUQE
open to below TV Point, final Location as per Site
K
Master 2 42.0 m
A7
Project Title:
PRIVATE VILLA (B+G+1+R) DUBAI HILLS, DUBAI, UAE PLOT NO.: - 6316624
TV Point, final Location as per Site
OPEN TO SKY BALCONY 5 m2 edge of canopy
d Covere
y Balcon
5 m2
L Consultant: edge of canopy
08
Main Contractor:
Subconsultant/ Subcontractor:
Drawing title:
FIRST FLOOR PLAN TELECOMMUNICATION SYSTEM Original Scale
1:100
FIRST FLOOR PLAN
Drawn
Checked SP/SJ
Authorised
Date: AUG-2022
Date:
AUG-2022
Plot Size RK
SP/EL
Date:
AUG-2022
Sheet #
Project Number
460-22
TL-104
A1 Rev
00
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY.
315°
NE
N
NW
135°
02 03
04
05
06 07 09
10 11
12
225°
01
2. DO NOT SCALE FROM THE DRAWINGS.
SW
45°
SE
3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS. 6. ALL SUBMISSIONS AND DRAWINGS ARE FOLLOWING M/S DDA AND M/S EMAAR REGULATIONS.
13
KEYPLAN:
A1
CANOPY
A B
A2 FIRE PIT W/P
C
+8.60
OPEN TO SKY
ROOF LOUNGE 42m2 +9.20
A3
W/P
Jacuzzi 6 m2
+8.90
D
Wi-Fi
A4
A5 m
00 BBQ 2
Description
Rev
2
Date
Checked
Authorized
Rev
Date
Authorized
E +8.65Recessed Telephone
F
Jn. Box (30x30x15cm)
OPEN TO SKY
TJB SERVICE AREA +8.60
2x50mmØ PVC Conduits from above in H/L Slab
G
A6 +8.60
H
Purpose of issue Client:
J
MR. MOHAMED YASIN FARUQE K
A E ARE SERVIC +8.60
A7 Project Title:
PRIVATE VILLA (B+G+1+R) DUBAI HILLS, DUBAI, UAE PLOT NO.: - 6316624
+9.45
L
Consultant:
ENTRY FRAME
+8.25
CANOPY
08
ROOF FLOOR PLAN
Main Contractor:
Subconsultant/ Subcontractor:
Drawing title:
ROOF FLOOR PLAN TELECOMMUNICATION SYSTEM Original Scale
Drawn
Checked SP/SJ
1:100
Authorised
Date: AUG-2022
Date:
AUG-2022
Plot Size RK
SP/EL
Date:
AUG-2022
Sheet #
Project Number
460-22
TL-105
A1 Rev
00
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY.
315°
NE
225°
NW
N
2. DO NOT SCALE FROM THE DRAWINGS.
SW
45°
SE
3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
135°
6. ALL SUBMISSIONS AND DRAWINGS ARE FOLLOWING M/S DDA AND M/S EMAAR REGULATIONS. KEYPLAN:
W/P
Wi-Fi
W/P
4 PAIR SCS CAT-6 CABLE RUNNING THROUGH 25mmØ CONDUIT (TYP)
TJB 2x50mmØ PVC Conduits to TJB in Roof Floor 3 x 4 PAIR SCS CAT-6 CABLE RUNNING THROUGH 2x50mmØ CONDUIT (TYP)
Concealed Telephone Jn. Box (30x30x15cm)
ROOF FLOOR
Wi-Fi
Wi-Fi
4 PAIR SCS CAT-6 CABLE RUNNING THROUGH 25mmØ CONDUIT (TYP)
TJB Concealed Telephone Jn. Box (30x30x15cm)
22 x 4 PAIR SCS CAT-6 CABLE RUNNING THROUGH 2x50mmØ CONDUIT (TYP)
FIRST FLOOR
2x50mmØ PVC Conduits to TJBs
Description
Rev
Date
Checked
Authorized
Rev
Date
Authorized
W/P Wi-Fi
Wi-Fi
Wi-Fi
Wi-Fi
2x4 PAIR SCS CAT-6 CABLE RUNNING THROUGH 25mmØ CONDUIT (TYP) 4 PAIR SCS CAT-6 CABLE RUNNING THROUGH 25mmØ CONDUIT (TYP)
2W D56 DUCTS TO VILLA CABINET AT 600mm LEVEL BELOW GROUND FLOOR PROTECTED BY CONCRETE IN DRIVEWAY WITH 6mm NYLON PULL ROPE
12U-CABINET 13 x 4 PAIR SCS CAT-6 CABLE RUNNING THROUGH 2x50mmØ CONDUIT (TYP)
GROUND FLOOR
Purpose of issue Client:
60x60X80 PRIMARY ENTRY BOX-MANHOLE
MR. MOHAMED YASIN FARUQE
TMH 2W D56 DUCTS TO VILLA CABINET AT 600mm LEVEL BELOW GROUND FLOOR PROTECTED BY CONCRETE IN DRIVEWAY EXTENDED 1M OUT OF PLOT LIMIT WITH 6mm NYLON PULL ROPE
2x50mmØ PVC Conduits to TJB in Basement Floor
TJB
Wi-Fi
Wi-Fi
Concealed Telephone Jn. Box (30x30x15cm)
Project Title:
PRIVATE VILLA (B+G+1+R) DUBAI HILLS, DUBAI, UAE PLOT NO.: - 6316624
2x4 PAIR SCS CAT-6 CABLE RUNNING THROUGH 25mmØ CONDUIT (TYP) 4 PAIR SCS CAT-6 CABLE RUNNING THROUGH 25mmØ CONDUIT (TYP)
BASEMENT FLOOR
Consultant:
450
TELEPHONE SCHEMATIC RISER DIAGRAM
TELEPHONE SOCKET MOUNTING DETAILS
Main Contractor:
NOTE: ALL FIBER OPTIC CABLE TERMINATION SHOULD BE DONE DONE BY THE BUILDING CONTRACTOR Subconsultant/ Subcontractor:
Drawing title:
TELECOMMUNICATION SYSTEM RISER DIAGRAM Original Scale
Drawn
Checked SP/SJ
1:100
Authorised
Date: AUG-2022
Date:
AUG-2022
Project Number
460-22
Plot Size RK
SP/EL
Date:
AUG-2022
A1
Sheet #
Rev
TL-106
00
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY.
315°
NE
225°
NW
135°
N
2. DO NOT SCALE FROM THE DRAWINGS.
SW
45°
SE
3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS. 6. ALL SUBMISSIONS AND DRAWINGS ARE FOLLOWING M/S DDA AND M/S EMAAR REGULATIONS. KEYPLAN:
Description
Rev
Purpose of issue
Date
Checked
Authorized
Rev
Date
Authorized
Client:
MR. MOHAMED YASIN FARUQE
Project Title:
PRIVATE VILLA (B+G+1+R) DUBAI HILLS, DUBAI, UAE PLOT NO.: - 6316624 Consultant:
Main Contractor:
Subconsultant/ Subcontractor:
Drawing title:
DM GENERAL NOTES DRAINAGE SYSTEM Original Scale
Drawn
Checked SP/SJ
1:100
Authorised
Date: AUG-2022
Date:
AUG-2022
Project Number
460-22
Plot Size RK
SP/EL
Date:
AUG-2022
A1
Sheet #
Rev
D-00-001
00
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY.
315° ROOF DRAIN SEALANT
FUNNEL DRAIN
150Ø PVC. SLEEVE PRECAST CONCRETE TILES TO APP.
Ø82 VP 160Ø DRAIN PIPE
40cm
250
4".
ROOF DRAIN
90cm
VARIES
HIGH LEVEL ALARM.
DUTY STANDBY
SLOPE
DUTY START
82MMØ OUT LET PIPE
4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS. 6. ALL SUBMISSIONS AND DRAWINGS ARE FOLLOWING M/S DDA AND M/S EMAAR REGULATIONS.
RIB SLAB
LOW LEVEL CONTROL.
KEYPLAN: MORTAR
TO STRC'L DWG.
FLOOR TRAP (110Ø x 50Ø)
1500x1500.
TO STRC'L DWG.
TYPICAL SUSPENDED FUNNEL DRAIN DETAIL
5 RAIN WATER PIPE
TYPICAL SECTION - LIFTING STATION
2
SCALE : NTS
TYPICAL DETAIL -OF ACCESS PANEL
SEALANT
DUTY AND STANDBY PUMP.
1
3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER.
3126195.43621782
F.F.L 1200
RAISING PIECE (110mm Ø)
N
GUIDE RAIL.
GATE VALVE. CHECK VALVE.
NE
MEMBRANE GLAND
WATER PROOFING MEMBRANE
FLOOR SCREED
RCC SLAB
45°
EMERGENCY PUMPING CONNECTION.
ؾ".PIPE.
225°
F.F.L
CORE HOLE 150Ø
SW
WATER PROOFING
ACCESS COVER HEAVY DUTY DOUBLE SEALL WITH GRP SEALING PLATE.
135°
ADAPTOR SPECIAL GROUTE FILL
2. DO NOT SCALE FROM THE DRAWINGS.
SOLAR SHELD FLEXIBLE FLASHING
NW
ACCESS COVER 600X600. HEAVY DUTY.
SE
60cm
GRAVEL FILL WATER PROOFING MEMBRANE IN TO THE ROOF DRAIN
SCALE : NTS
4
DOME TYPE RAIN WATER OUTLET DETAILS
3
SCALE : NTS
TYPICAL SECTION - RAIN WATER OUTLET SCALE : NTS
SCALE : NTS
50
150x75 C. ACCESS DOOR ABOVE SPILLOVER LEVEL OF HIGHEST SANITARY APPLIANCE
UPVC STACK (AS SPECIFICATION)
300 x 300 HEAVY DUTY GRATING
M8. ANCHOR BOLT.
150x75 C. ISOFIX . REF 133. PIPE CLIP.
300
200
CHANGE FROM ABOVE GROUND TO BELOW GROUND DRAINAGE PIPEWORK
ISOFIX . REF 133. PIPE CLIP.
250
ISOFIX PIPE CLIP, M-8. REF. 133
SERVICES PIPE.
STRAINER
D
LONG RADIUS REST BEND OR 2x135° BENDS
8mm THREADED ROD (GI.).
SERVICES PIPE.
CONCRETE SURROUND MONOLITHIC WITH FLOOR SLAB COUPLING ACTING AS FLEXIBLE JOINTS IN CASE OF SETTLEMENT
SLOPE D
600
UPVC UNDERGROUND DRAIN TO BS 4660
PVC. DRAIN PIPE. (32mm - 110mm) Ø110mm PIPE
10
TYPICAL SECTION - CATCH BASIN
8 TYPICAL VERTICAL PIPE SUPPORT DETAIL-1.
SCALE : NTS
UPVC. DRAIN PIPE.
9 TYPICAL VERTICAL PIPE SUPPORT DETAIL-2
( ALL PIPE CLIPS ARE RIGIDLY FITTED ON PIPE. )
CHROMIUM PLATED CAST BRASS SCREW DOWN GRATING. S.H.W. HAMADA TYPE `H-397-P'.
RCC WALL
IL(IN)
150
ACCESS CAP 160Ø x 110Ø REDUCER
B
800
100
11
100
SEDIMENT BUCKET WITH 10MM HOLES / PERFORATIONS
GRADE 20 CONCRETE BLINDING 75 THICKNESS
Rev
Date
Authorized
INTERNAL FACE TO HAVE 12mm THICK MORTAR RENDERING
SECTION
14
TYPICAL PLAN - SAND TRAP
13
Authorized
12mm THICK MORTAR RENDERING
6mm MS PLATE
SCALE : NTS
Checked
GRADE 20 CONCRETE BASE SLAB
SCALE : NTS
12
Date
GRADE 20 INSITU CONCRETE WALLS OR 200mm HOLLOW BLOCK WORK FILLED WITH GRADE 20 CONCRETE
STEEL STEPS
SECTION
TYPICAL DETAIL OF SUSPENDED FLOOR TRAP
Description
Rev 300
100
800x800 CHAMBER
TRAPPED FLOOR GULLY
TYPICAL SECTION - DRYMANHOLE
200 GRADE 20 CONCRETE BENCHING
SUPPORT FOR SEDIMENT BUCKET
350
4NOs: 8mm DROP ROD
NOTE: MANHOLE & COVER DIMENSIONS TO BE AS PER LAYOUT DRGS
DUCTILE IRON M.H.COVER+FRAME
OUTLET
100
350
PIPE TO PROTRUDE INTO MANHOLE BY 50 MIN.
GRADE 20 CONCRETE SPLAY
82Ø OUTLET
150
150mm Ø EXTRA STRENGTH VITRIFIED CLAY PIPE
PLAN
HEIGHT (MIN 600)
800
MIN. 50mm DIA ACCESS PLUG.
50Ø INLET
300
50
B
ROCKER PIPE 600 LONG
160MM Ø UPVC SWEPT JUNCTION IL(OUT) = IL(IN) -150mm
50
600
GRADE 20 CONCRETE HAUNCH & SURROUND 300 WIDE
200
INLET MH COVER
FLOOR SLAB
200 300
ROCKER PIPE 600 LONG
F.F.L
160MM Ø PVC INLET
750
300
8mm WEDGE ANCHORE BOLT
VARIES TO SUIT SITE
300 200
200
150
800
500
150
600
600x600 MM M.D. RECESSED MANHOLE COVER
FINISHED FLOOR LEVEL
100Ø EXTENSION PIPE. SEALED ACCESS
SUPPORT SPACING SHALL BE AS PER RELEVANT SPECIFICATION.
( ALL PIPE CLIPS ARE RIGIDLY FITTED ON PIPE. )
NOTE:-HEAVY DUTY GRATING CAN BE USED AS AN ACCESS FOR CLEANING
150
7
SCALE : NTS
600
TYPICAL SECTION - PIPE THROUGH SLAB
6
TYPICAL PIPE SUPPORT FOR DRAIN PIPE.
TYPICAL MANHOLE DETAIL -TYPE -A DEPTH TO INVERT LESS THAN 1M
SCALE : NTS
Purpose of issue Client:
75mm THICK PRECAST CONCRETE SEATING RINGS / BLOCKS BEDDED IN CEMENT
600
WASTE PIPE
HEAVY DUTY DOUBLE TRIANGULAR DUCTILE IRON COVER AND FRAME BS EN124 CLASS D400 WITH 675 Ø CLEAR OPENING
SOIL PIPE ROOF
TWO COATS OF BITUMINOUS PAINT
100
GRADE SRC 20 CONCRETE SURROUND TO COVER 1650 Ø UPTO UNDERSIDE OF WEARING COURSE OR PAVEMENT 200
250
OPC 35 REINFORCED CONCRETE COVER SLAB
VENT CAP
Project Title:
250
GRADE OPC 20 CONCRETE
215 225
PLAN VIEW
FALSE CEILING
Ø110 mm.SOIL PIPE 250MAX
200
Ø82 VENT PIPE
W.C.
Ø40
OUTLET PIPE 150Ø
GROUND FLOOR
SYPHON FLOOR GULLY
200 THICK
SLOPE I IN 12 400
INLET PIPE
ANY EXCESS EXCAVATION BELOW UNDERSIDE OF PIPE BEDDING SHALL BE FILLED WITH CONCRETE GRADE SRC 20
GEOTEXTILE FABRIC MESH ON WATERPROOFING MEMBRANE ON
Consultant:
ROCKER PIPE 600 FOR D<400 150 FOR D>400
INSPECTION EYE.
ROCKER PIPE 600 FOR D<400 150 FOR D>400
CONCRETE SLAB ON STEEL DECK 100 + 41 mm THICK
45°BEND GRADE OPC 20 MASS CONCRETE BASE SLAB 75 THICK GRADE SRC 20 BLINDING
INSPECTION EYE.
CONCRETE BAFFLE
100 MM THICK THERMAL INSULATION ON
150ØESVC PIPE (MIN.)
1199 (MAX.)
GRP LINING TO BENCHING AND INVERT MIN. 6 THICK. NON SLIP SURFACE 300MIN
Ø110 mm.WASTE PIPE
WASH BASIN
SECTION VIEW
225
GRADE OPC 20 CONCRETE SURROUND
INSPECTION EYE.
INSPECTION EYE.
100
600x600 DOUBLE SEAL C.I. COVER
FALSE CEILING SYPHON FLOOR GULLY
1200 Ø
TANKING MEMBRANE AND PROTECTION
200ØESVC PIPE (MIN.)
VARIES
ABOVE GROUND FLOORS
CONCRETE BAFFLE 100mm WIDE
LOOSELY LAID P.C CONCRETE TILES 300x300x30 MM ON
Ø82mm WASTE VENT PIPE
W.C. 'Z' TIE AROUND LINEAR AT 500 CRS
PRIVATE VILLA (B+G+1+R) DUBAI HILLS, DUBAI, UAE PLOT NO.: - 6316624
FLASHING SLEEVE
OUTLET PIPE 150Ø AT LOW LEVEL
Ø40
600 (min)
PAVING INCLUDING ROAD SURFACE
WASH BASIN
300 100
200
325MAX.
250 PRESSURE INLET PIPE AT HIGH LEVEL
MR. MOHAMED YASIN FARUQE
FRAME BEDDED ON CEMENT SAND MORTAR
200MIN.
1.00 m.
GRP SEALING PLATE
VENT THRU ROOF SLAB
50 THICK CONCRETE SRC 20 MEMBRANE PROTECTION TANKING MEMBRANE
Main Contractor:
TO GULLY TRAP.
17
TO MANHOLE
15
PRESSURE BREAKING MANHOLE DETAIL SCALE : NTS
16
TYPICAL MANHOLE DETAIL -TYPE -B DEPTH TO INVERT GREATER THAN 1M LESS THAN 3M
NTS
18
TYPICAL DETAIL OF VENT THROUGH ROOF SCALE : NTS
TYPICAL DRAIN-2 SCALE : NTS
Subconsultant/ Subcontractor:
REMOVABLE COVER (BY CIVIL CONTRACTOR)
CLEAR INTERNAL
600x600mm LIGHT DUTY DOUBLE SEAL COVER
F.F.L.
BLOCK WORK (BY CIVIL CONTRACTOR)
X
REFER LAYOUT
60x60cm CHAMBER
MASS CONCRETE FILLING TO SHAPE (BY CIVIL CONTRACTOR) OPENING FOR PIPE
BRASS NUT,BOLT & WASHER 300x300 SEALED COVER
STANDARD DETAILS DRAINAGE SYSTEM
SCALE : NTS 200
Ø110 COUPLER
DETAIL OF DRAINAGE CONNECTION FOR BATH ROOM 19 350
150 x 150 HOPPER WITH FRAME & GRATE
160ØOUTLET PIPE
Drawing title:
Ø110 WASTE PIPE TO COLLECTING PIT
Ø110 WASTE PIPE FROM FLOOR DRAIN
200mmTHICK SOLID BLOCK
150mmØuPVC PIPE INLET
CONCRETE PAD
Original Scale
Drawn
Checked SP/SJ
20
TYPICAL DETAIL OF GULLY TRAP SCALE : NTS
21
DRY GULLY TRAP DETAIL
1:100
Authorised
Date: AUG-2022
Date:
AUG-2022
Plot Size RK
SP/EL
Date:
AUG-2022
A1
SCALE : NTS
Project Number
460-22
Sheet #
Rev
D-01-001
00
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY.
315°
SE
45°
L OT P
N
NW
135°
01
02 03
04
05
06 07 09
10 11
12
13
225°
SW
I MI T
NE
P
L
MI
T
L I
2. DO NOT SCALE FROM THE DRAWINGS.
L OT
3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS. 6. ALL SUBMISSIONS AND DRAWINGS ARE FOLLOWING M/S DDA AND M/S EMAAR REGULATIONS. KEYPLAN:
DRAINAGE LEGEND SYMBOL
CO
Ø82 mm WP
CB
CHANNEL GRATING
A
FLOOR TRAP
CO
CLEAN OUT
WC
WC DRAIN POINT
WB
WASH BASIN DRAIN POINT
MH
MANHOLE
SMH
STORM WATER MANHOLE
CB
CATCH BASIN
ST
SAND TRAP
A1
CHANNEL GRATING
Ø82 mm WP
B
FT
PUMPROOM & BALANCE TANK
Maneuvering Parking
DESCRIPTION
Ø82 mm WP
CO
TV
CO
TOILET
A2
CO
Ø110 mm WP
DRIVER'S
CO
-3.20
C
CB
SHOW GARAGE 192 m2 -3.15
-3.18
MAID'S 19 m2
ENTRANCE
Ø110 mm WP Ø50 mm VP Ø110 mm SP
PBM
A3
-3.15
A SHISH E LOUNG 20 m2
Ø110 mm WP
D CO
N SUNKE N E D R GA
A4
GT
GULLY TRAP
RKG
ROAD KERB GULLY
CO
GREASE TRAP
SAND TRAP
FT
Ø110 mm SP
PRESSURE BREAK MANHOLE
Ø110 mm WP
CO
A5
RWO
RAIN WATER OUTLET
FT CO
GT
E
GT
CHANNEL GRATING
F
KIT
FT
GT
G
m Ø110 m
H
Rev
Date
Authorized
WASTE LINE TING L GRA
A6
NE
CHAN
VENT LINE
-3.15
RAIN WATER LINE PDP (PLANTER DRAIN PIPE)
ELEC. 6 m2 SERVICE ENTRANCE
LAUNDRY 12 m2
MECHANICAL 12 m2 FT
CO
SOIL LINE HIGH LEVEL G GAMIN M ROO OPEN 26 m2
FT
K
VENT LINE HIGH LEVEL
E 00 WID INDY5
A7
E 00 WID INDY5
E 00 WID INDY5
N
SCREE
PUMP ROOM & BALANCETANK CHANNEL GRATING 13 m2
Client:
FLOW DIRECTION
-3.15
WATER TANK 12 m2
Purpose of issue
WASTE LINE HIGH LEVEL
A CINEM 2 m .0 5 2
GV
GATE VALVE
H/L
HIGH LEVEL
U/G F/A
UNDER GROUND PIPE
F/B
ALL DRAINAGE PIPES RUNNING AT HIGH LEVEL OF DRY AREA SHALL BE ACOUSTIC INSULATED
T/B DN
DOWN
CL IL
COVER LEVEL INVERT LEVEL
MR. MOHAMED YASIN FARUQE
Project Title:
PRIVATE VILLA (B+G+1+R) DUBAI HILLS, DUBAI, UAE PLOT NO.: - 6316624 Consultant:
P
08
FROM ABOVE FROM BELOW TO ABOVE TO BELOW
T/A
L
L I
MI
L OT
T
Authorized
SOIL LINE
CO
Ø110 mm PRESSURE PIPE T/A Ø50 mm VP T/A
Checked
PRESSURE LINE
CO
WP
CO
-3.15
Date
KITCHEN WASTE LINE
-3.20
SERVICE ENTRANCE
Description
Rev
-3.20
PIT SIZE=1.5x1.5x1 m
Ø110 mm PDP F/A
J
FT
FL CL OOR EA NO UT
Ø110 mm WP Ø50 mm VP Ø110 mm SP
MI
P
T
L I Main Contractor:
Subconsultant/ Subcontractor:
Drawing title:
BASEMENT FLOOR PLAN LOW LEVEL
BASEMENT FLOOR LOW LEVEL PLAN DRAINAGE SYSTEM Original Scale
Drawn
Checked SP/SJ
1:100
Authorised
Date: AUG-2022
Date:
AUG-2022
Project Number
460-22
Plot Size RK
SP/EL
Date:
AUG-2022
A1
Sheet #
Rev
D-02-001
00
L OT
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY.
315°
SE
45°
L OT P
N
NW
135°
01
02 03
04
05
06 07 09
10 11
12
13
225°
SW
I MI T
NE
P
L
MI
T
L I
2. DO NOT SCALE FROM THE DRAWINGS.
L OT
3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS. 6. ALL SUBMISSIONS AND DRAWINGS ARE FOLLOWING M/S DDA AND M/S EMAAR REGULATIONS. KEYPLAN:
DRAINAGE LEGEND SYMBOL FT
FLOOR TRAP
CO
CLEAN OUT
WC
WC DRAIN POINT
WB
WASH BASIN DRAIN POINT
MH
MANHOLE
SMH
STORM WATER MANHOLE
CB
CATCH BASIN
ST
SAND TRAP
PUMPROOM & BALANCE TANK
Maneuvering Parking
DESCRIPTION
A1
A B TV
TOILET
A2
DRIVER'S -3.20
C
SHOW GARAGE 192 m2 -3.15
-3.18
MAID'S 19 m2
ENTRANCE
PBM
A3
-3.15
A SHISH E LOUNG 2 m 0 2
D
N SUNKE N E D R GA
A4
PRESSURE BREAK MANHOLE
GT
GULLY TRAP
RKG
ROAD KERB GULLY GREASE TRAP
A5
RWO
RAIN WATER OUTLET CHANNEL GRATING
E Ø110 mm PDP T/B
F
KIT
Ø110 mm PDP F/A
Date
Checked
Authorized
Rev
Date
Authorized
PRESSURE LINE KITCHEN WASTE LINE
Ø110 mm PRESSURE PIPE F/B Ø50 mm VP F/B
SOIL LINE
-3.20
SERVICE ENTRANCE
Description
Rev
-3.20
WASTE LINE
G -3.15
A6
ER N REF UATIO N ONTIN FOR C D FLOOR PLA N U O GR
VENT LINE
-3.15
H
PDP (PLANTER DRAIN PIPE)
ELEC. 6 m2 SERVICE ENTRANCE
J
RAIN WATER LINE
FOR CONTINUATION REFER GROUND FLOOR PLAN
LAUNDRY 12 m2
MECHANICAL 12 m2
SOIL LINE HIGH LEVEL G GAMIN M ROO N E P O 26 m2
CO CO
K
VENT LINE HIGH LEVEL
A CINEM 2 m .0 5 2 0 INDY50
A7
WIDE
0 INDY50
WIDE
E 00 WID INDY5
N SCREE
PUMP ROOM & BALANCETANK 13 m2
GV
GATE VALVE
H/L
HIGH LEVEL
U/G F/A
UNDER GROUND PIPE
F/B
FOR CONTINUATION REFER GROUND FLOOR PLAN
ALL DRAINAGE PIPES RUNNING AT HIGH LEVEL OF DRY AREA SHALL BE ACOUSTIC INSULATED
T/B DN
DOWN
CL IL
COVER LEVEL INVERT LEVEL
MR. MOHAMED YASIN FARUQE
Project Title:
PRIVATE VILLA (B+G+1+R) DUBAI HILLS, DUBAI, UAE PLOT NO.: - 6316624 Consultant:
P
08
FROM ABOVE FROM BELOW TO ABOVE TO BELOW
T/A
L
L I
MI
L OT
T
Client:
FLOW DIRECTION
-3.15
WATER TANK 12 m2
Purpose of issue
WASTE LINE HIGH LEVEL
MI
P
T
L I Main Contractor:
Subconsultant/ Subcontractor:
Drawing title:
BASEMENT FLOOR PLAN HIGH LEVEL
BASEMENT FLOOR HIGH LEVEL PLAN DRAINAGE SYSTEM Original Scale
Drawn
Checked SP/SJ
1:100
Authorised
Date: AUG-2022
Date:
AUG-2022
Project Number
460-22
Plot Size RK
SP/EL
Date:
AUG-2022
A1
Sheet #
Rev
D-02-001A
00
L OT
NOTES :-
P
L OT
02 03 SUNKEN 04
05
06 07 09
LOUNGE
JACUZZI
10 11
FIRE PLACE
FIRE PIT +0.45
12
N
01
13
135°
TOTAL WATER CONSUMPTION IN (IMP GALLON)
NW
WATER CONSUMPTION IN (IMP GALLON)
NE
45°
P
2. DO NOT SCALE FROM THE DRAWINGS.
SWIMMING POOL
+0.45
-1.35
225°
QTY
SE
SW
DESCRIPTION
PARKW A ENTRA Y NCE
I MI T
24 HOUR WATER REQUIREMENT SL.NO
MI
L
L I
T
SEWAGE CALCULATION
1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY.
315°
L OT
3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS. 6. ALL SUBMISSIONS AND DRAWINGS ARE FOLLOWING M/S DDA AND M/S EMAAR REGULATIONS.
+0.40
-0.20
1
Bed Room
9
125
1125
2
Swimming Pool
1
500
500
DRAINAGE LEGEND SYMBOL
+0.20
+0.35
TOTAL
OUTDOOR LIVING 57.0 m2
A
A1
COUNTER
B
FLOOR TRAP
CO
CLEAN OUT
WC
WC DRAIN POINT
WB
WASH BASIN DRAIN POINT
MH
MANHOLE
SMH
STORM WATER MANHOLE
CB
CATCH BASIN
ST
SAND TRAP
+0.40
WATER CONSUMPTION PER DAY = 1625 Imp.Gallon
-3.20
-0.20
BBQ
A2
= 80% of Water consumption C
= 0.8x1625
DESCRIPTION
FT
+0.35
-0.20
1625 Imp.Gallon
SEWAGE FLOW PER DAY
KEYPLAN:
+0.35
OPEN TO SKY
= 1300 Imp.Gallon
OPEN TO ABOVE
SHOW KITCHEN 30.0 m2 FT
LIVING
5.0 m2
A3
5
Ø110 mm SP F/A Ø82 mm VP T/A Ø110 mm WP F/A
TV
Ø110 mm SP Ø50 mm VP Ø110 mm WP
D
CO
CO
A4
FT
E
GT
GULLY TRAP
RKG
ROAD KERB GULLY
CO
A5 GREASE TRAP SUITE GUEST 2 m .0 6 2
FT
RWO
RAIN WATER OUTLET
Ø110 mm PDP F/A T/B
F
OPEN TO SKY
CHANNEL GRATING
-3.20
CHEF'S KITCHEN 14.40 m2
G
m SP Ø110 m VP m Ø50 m m WP m 0 Ø11
Ø110 mm SP Ø50 mm VP Ø110 mm WP
Ø200 UP V SLOPE-1 C PIPE :120
+0.45
J
Ø110 mm RWP F/A
FT
TOILET 8.50 m2
FT
ARGE DISCH FREE
/A m SP F Ø110 m VP T/A m Ø82 m WP F/A m Ø110 m
FOR CONTINUATION REFER BASEMENT FLOOR HIGH LEVEL PLAN
SIDE ENTRANCE
PDP (PLANTER DRAIN PIPE)
Ø11
SUITE GUEST 2 m .0 8 2
SOIL LINE HIGH LEVEL
FREE
MAIN ENTRANCE
+0.40
m RWP
Ø110 m
FLOW DIRECTION
+0.35
GV
GATE VALVE
H/L
HIGH LEVEL
U/G F/A
UNDER GROUND PIPE
F/B
PBMH
+0.35
GT Ø200 UPVC PIPE SLOPE-1:120
FIC
FFL
T/B DN
DOWN
CL IL
COVER LEVEL
MH-01
MI
TO AUTHORITY MANHOLE
T
P LPG M ETER
INVERT LEVEL
PRIVATE VILLA (B+G+1+R) DUBAI HILLS, DUBAI, UAE PLOT NO.: - 6316624 Consultant:
0.00 +0.05
0.00
MI
0.00
08
Project Title:
L OT
-0.05
P
T
+0.35
MR. MOHAMED YASIN FARUQE
L I
GARBFCAO GE RM ELECT. RM. +7.66 UTILITY FFL ROOM+7.66
FROM ABOVE FROM BELOW TO ABOVE TO BELOW
T/A FT
Client:
F/A
-0.20
GT
VENT LINE HIGH LEVEL
A7
ARGE
DISCH
FOR CONTINUATION REFER BASEMENT FLOOR HIGH LEVEL PLAN
L
Purpose of issue
WASTE LINE HIGH LEVEL
SUITE GUEST 2 .0 30 m
REFLECTIVE POOL
Authorized
RAIN WATER LINE
5 F/A P.3 W0 R+ 0 mm
FOYER 14.0 m2
+0.40 SIDE ENTRANCE FREE DISCHARGE
Date
VENT LINE
BAS
CO
K
Rev
CO
FT
PANTRY
SOIL LINE
A6
WASTE LINE
R N REFE UATIO L PLAN ONTIN FOR C R HIGH LEVE O O FL EMENT
+0.45
Authorized
CO CO
CO
Checked
KITCHEN WASTE LINE
CO FT
H
Date
PRESSURE LINE
REFLECTIVE POOL
FT
Description
Rev
12.69
L OT
L I
PRESSURE BREAK MANHOLE
CO
CO
Ø110 mm RWP F/A
en Sunk n d r a G e
DINING 37.0 m2
BANQUETING AREA 6.20m2
FREE DISCHARGE
+0.40
CO
TOILET 4.30 m2
PBM
GATE LEVEL 0.00
Main Contractor:
DRIVEWAY
ALL DRAINAGE PIPES RUNNING AT HIGH LEVEL OF DRY AREA SHALL BE ACOUSTIC INSULATED Subconsultant/ Subcontractor:
CONTRACTOR TO VERIFY THE AUTHORITY / DEVELOPER DRAINAGE HOUSE CONNECTION BEFORE WORK EXECUTION
ROAD
GROUND FLOOR PLAN LOW LEVEL
Drawing title:
Original Scale
SITE SETTING OUT WITH GROUND FLOOR LOW LEVEL PLAN DRAINAGE SYSTEM Drawn
Checked SP/SJ
1:100
Authorised
Date: AUG-2022
Date:
AUG-2022
Project Number
460-22
Plot Size RK
SP/EL
Date:
AUG-2022
A1
Sheet #
Rev
D-02-002
00
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY.
315°
L OT
NE
L OT P
N
NW
02 03 SUNKEN 04
05
LOUNGE
06 07 09 JACUZZI
10 11
FIRE PLACE
FIRE PIT +0.45
12
13
135°
01
SWIMMING POOL
+0.45
225°
3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER.
SW
2. DO NOT SCALE FROM THE DRAWINGS.
45°
P
SE
I MI T
PARKW A ENTRA Y NCE
L
MI
T
L I
4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS. 6. ALL SUBMISSIONS AND DRAWINGS ARE FOLLOWING M/S DDA AND M/S EMAAR REGULATIONS.
-1.35
+0.40
KEYPLAN:
DRAINAGE LEGEND
-0.20
SYMBOL +0.20
+0.35
+0.35
-0.20
DESCRIPTION
FT
FLOOR TRAP
CO
CLEAN OUT
WC
WC DRAIN POINT
WB
WASH BASIN DRAIN POINT
MH
MANHOLE
SMH
STORM WATER MANHOLE
CB
CATCH BASIN
ST
SAND TRAP
OUTDOOR LIVING 57.0 m2
A
A1
COUNTER
B
+0.40 -3.20
-0.20
BBQ
A2
C +0.35
OPEN TO SKY
OPEN TO ABOVE
SHOW KITCHEN 30.0 m2
LIVING
2
55.0 m
A3
PBM
PRESSURE BREAK MANHOLE
CO CO
CO CO
TV
D
F/A n Sunke n e d r a G
m RWP
CO
Ø110 mm SP T/B Ø82 mm VP F/B Ø110 mm WP T/B
Ø110 m
DINING 37.0 m2
A4
Ø110 mm RWP F/A T/B
BANQUETING AREA 6.20m2
TOILET 4.30 m2FOR CONTINUATION REFER
GT
GULLY TRAP
RKG
ROAD KERB GULLY
FIRST FLOOR LOW LEVEL PLAN
+0.40
E
FOR CONTINUATION REFER FIRST FLOOR LOW LEVEL PLAN
GREASE TRAP
A5 RWO
SUITE GUEST 2 .0 26 m
CO
CHANNEL GRATING
OPEN TO SKY
CO
CHEF'S KITCHEN 14.40 m2
ER N REF PLAN UATIO LEVEL ONTIN FOR C LOOR LOW F FIRST
RAIN WATER LINE WP T/B 0 mm R
PDP (PLANTER DRAIN PIPE)
Ø11
TOILET 8.50 m2
FOYER 14.0 m2
+0.35
CO
VENT LINE HIGH LEVEL m RWP
Ø110 m
MAIN ENTRANCE
+0.40
GATE VALVE
H/L
HIGH LEVEL
U/G F/A
UNDER GROUND PIPE
+0.35
T/B DN
DOWN
CL IL
COVER LEVEL
08
INVERT LEVEL
MR. MOHAMED YASIN FARUQE
Project Title:
PRIVATE VILLA (B+G+1+R) DUBAI HILLS, DUBAI, UAE PLOT NO.: - 6316624 Consultant:
P
L OT
-0.05
FROM ABOVE FROM BELOW TO ABOVE TO BELOW
T/A
+0.35
MI
GV
F/B +0.35
Client:
FLOW DIRECTION
A7
F/A T/B
-0.20
L
Purpose of issue
WASTE LINE HIGH LEVEL
SUITE GUEST 2 30.0 m
REFLECTIVE POOL
SOIL LINE HIGH LEVEL
SUITE GUEST 2 m .0 8 2
+0.40 SIDE ENTRANCE
T
Authorized
VENT LINE
CO /B m SP T Ø110 m P F/B mV Ø82 m m WP T/B m 0 Ø11
+0.45
J
GARBA GE ELECT. RM RM. +7.66 UTILITY FFL ROOM+7.66 FFL
Date
WASTE LINE
A6
CO
SIDE ENTRANCE
Rev
SOIL LINE
CO
+0.45
K
Authorized
CO
CO
Ø110 mm PDP T/B
Checked
KITCHEN WASTE LINE
H
PANTRY
Date
PRESSURE LINE
-3.20
REFLECTIVE POOL
Ø110 mm PDP F/A
G
Description
Rev
Ø110 mm PDP T/B
F
0.00
0.00 +0.05
T
P 0.00
ETER
MI
LPG M
L I
L OT
L I
RAIN WATER OUTLET
GATE LEVEL 0.00
ALL DRAINAGE PIPES RUNNING AT HIGH LEVEL OF DRY AREA SHALL BE ACOUSTIC INSULATED
Main Contractor:
DRIVEWAY
Subconsultant/ Subcontractor:
Drawing title:
ROAD
GROUND FLOOR PLAN HIGH LEVEL
GROUND FLOOR HIGH LEVEL PLAN DRAINAGE SYSTEM Original Scale
Drawn
Checked SP/SJ
1:100
Authorised
Date: AUG-2022
Date:
AUG-2022
Project Number
460-22
Plot Size RK
SP/EL
Date:
AUG-2022
A1
Sheet #
Rev
D-02-002A
00
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY.
315°
NE
N
NW
04
05
06 07 09
10 11
12
13
135°
02 03
225°
01
2. DO NOT SCALE FROM THE DRAWINGS.
SW
45°
SE
3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS. 6. ALL SUBMISSIONS AND DRAWINGS ARE FOLLOWING M/S DDA AND M/S EMAAR REGULATIONS. KEYPLAN:
DRAINAGE LEGEND SYMBOL
edge of canopy
edge of canopy
B
FT
FLOOR TRAP
CO
CLEAN OUT
WC
WC DRAIN POINT
WB
WASH BASIN DRAIN POINT
MH
MANHOLE
SMH
STORM WATER MANHOLE
CB
CATCH BASIN
ST
SAND TRAP
A1
Semi-Covered Balcony 11 m2 +4.80
A limit of pergola
BD
TERRACE 30 m2
A2
DESCRIPTION
BD
FAMILY ROOM 24.0 m2
C Master 42.0 m2
open to sky
OPEN TO SKY OPEN TO SKY
open to below
m BDP
Ø50 m
Ø50 mm BDP
A3
PBM
PRESSURE BREAK MANHOLE
FT
SUITE GUEST 2 27.0 m
PLD
+4.85
D
FT
Ø110 mm PDP F/A CO
ROAD KERB GULLY GREASE TRAP
FT
CO
RWO
CO
RAIN WATER OUTLET CHANNEL GRATING Description
Rev
FOR CONTINUATION REFER GROUND FLOOR HIGH LEVEL PLAN FT
OPEN TO SKY
FT
/A m SP F Ø110 m VP T/A m Ø82 m WP F/A m Ø110 m
CO
REFLECTIVE POOL
Ø110 mm RWP F/A T/B
SUITE GUEST 2 28.0 m
Authorized
Rev
Date
Authorized
SOIL LINE
A6
CO
WASTE LINE
FT
PLD
Checked
KITCHEN WASTE LINE
ER N N REF UATIO H LEVEL PLA ONTIN FOR C D FLOOR HIG N GROU
CO
Date
PRESSURE LINE
m SP Ø110 m VP m Ø50 m m WP Ø110 m
G H
RKG
A5
CO CO
open to below
GULLY TRAP
m WP Ø85 m
FT Ø110 mm SP Ø50 mm VP Ø110 mm WP
GT
A4
FT m SP Ø110 m VP m Ø50 m m WP Ø110 m
CO
F
F/A T/B
CO
FOR CONTINUATION REFER GROUND FLOOR HIGH LEVEL PLAN
Ø110 mm RWP F/A T/B
E
m RWP
Ø110 m
VENT LINE
FT
FT
RAIN WATER LINE
CO
+4.85
CO
CO
CO
J
K
open to sky
Ø50 mm BDP
Master 42.0 m2
SOIL LINE HIGH LEVEL
FT
FT
open to below
PDP (PLANTER DRAIN PIPE)
CO
SIDE ENTRANCE
VENT LINE HIGH LEVEL
Master 2 42.0 m REFLECTIVE POOL
Purpose of issue
WASTE LINE HIGH LEVEL
m RWP
Ø110 m
MAIN ENTRANCE
BD OPEN TO SKY BALCONY 5 m2
edge of canopy
y 5 m2
alcon vered B
Co
F/A T/B
FLOW DIRECTION
A7 GV
GATE VALVE
H/L
HIGH LEVEL
U/G F/A
UNDER GROUND PIPE
F/B
L
FROM ABOVE FROM BELOW
T/B
TO ABOVE TO BELOW
DN
DOWN
CL IL
COVER LEVEL
T/A edge of canopy
Client:
INVERT LEVEL
MR. MOHAMED YASIN FARUQE
Project Title:
PRIVATE VILLA (B+G+1+R) DUBAI HILLS, DUBAI, UAE PLOT NO.: - 6316624 Consultant:
08
ALL DRAINAGE PIPES RUNNING AT HIGH LEVEL OF DRY AREA SHALL BE ACOUSTIC INSULATED
Main Contractor:
Subconsultant/ Subcontractor:
Drawing title:
FIRST FLOOR PLAN LOW LEVEL
FIRST FLOOR LOW LEVEL PLAN DRAINAGE SYSTEM Original Scale
Drawn
Checked SP/SJ
1:100
Authorised
Date: AUG-2022
Date:
AUG-2022
Project Number
460-22
Plot Size RK
SP/EL
Date:
AUG-2022
A1
Sheet #
Rev
D-02-003
00
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY.
315°
05
06 07 09
10 11
12
NE
N
04
NW
02 03
13
225°
01
2. DO NOT SCALE FROM THE DRAWINGS.
SW
45°
SE
3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
135°
6. ALL SUBMISSIONS AND DRAWINGS ARE FOLLOWING M/S DDA AND M/S EMAAR REGULATIONS. KEYPLAN:
DRAINAGE LEGEND SYMBOL
edge of canopy
edge of canopy
A1
Semi-Covered Balcony 11 m2 +4.80
A B
DESCRIPTION
FT
FLOOR TRAP
CO
CLEAN OUT
WC
WC DRAIN POINT
WB
WASH BASIN DRAIN POINT
MH
MANHOLE
SMH
STORM WATER MANHOLE
CB
CATCH BASIN
ST
SAND TRAP
limit of pergola TERRACE 30 m2
A2 FAMILY ROOM 24.0 m2
C Master 42.0 m2
OPEN TO SKY OPEN TO SKY
open to sky
open to below
A3 SUITE GUEST 2 27.0 m
+4.85
D
PBM m RWP
Ø110 m
F/A T/B
A4
GT
GULLY TRAP
RKG
ROAD KERB GULLY
Ø110 mm RWP F/A T/B
ER N REF PLAN UATIO LEVEL ONTIN FOR C LOOR LOW F ROOF
FOR CONTINUATION REFER ROOF FLOOR LOW LEVEL PLAN
E
Ø110 mm PDP T/B
A5
GREASE TRAP
open to below
CO
F
RWO OPEN TO SKY
m SP Ø110 mm VP Ø50 mmm WP Ø110
/B m SP T Ø110 m P F/B mV Ø82 m m WP T/B Ø110 m
CO
CO
REFLECTIVE POOL
Ø110 mm RWP F/A T/B
PRESSURE BREAK MANHOLE
RAIN WATER OUTLET CHANNEL GRATING Description
Rev
SUITE GUEST 2 28.0 m
Date
Checked
Authorized
Rev
Date
Authorized
PRESSURE LINE KITCHEN WASTE LINE
G
SOIL LINE
A6
WASTE LINE
H
VENT LINE +4.85
J
K
open to sky
Master 42.0 m2
RAIN WATER LINE PDP (PLANTER DRAIN PIPE)
open to below
SOIL LINE HIGH LEVEL
Purpose of issue
WASTE LINE HIGH LEVEL
SIDE ENTRANCE
Master 2 42.0 m REFLECTIVE POOL
/B
F/A T m RWP
Ø110 m
VENT LINE HIGH LEVEL
A7
FLOW DIRECTION
MAIN ENTRANCE
OPEN TO SKY BALCONY 5 m2 edge of canopy
y 5 m2
alcon vered B
Co
L
GV
GATE VALVE
H/L
HIGH LEVEL
U/G F/A
UNDER GROUND PIPE
F/B
08
ALL DRAINAGE PIPES RUNNING AT HIGH LEVEL OF DRY AREA SHALL BE ACOUSTIC INSULATED
FROM ABOVE FROM BELOW
T/B
TO ABOVE TO BELOW
DN
DOWN
CL IL
COVER LEVEL
T/A
edge of canopy
Client:
INVERT LEVEL
MR. MOHAMED YASIN FARUQE
Project Title:
PRIVATE VILLA (B+G+1+R) DUBAI HILLS, DUBAI, UAE PLOT NO.: - 6316624 Consultant:
Main Contractor:
Subconsultant/ Subcontractor:
FIRST FLOOR PLAN HIGH LEVEL
Drawing title:
FIRST FLOOR HIGH LEVEL PLAN DRAINAGE SYSTEM Original Scale
Drawn
Checked SP/SJ
1:100
Authorised
Date: AUG-2022
Date:
AUG-2022
Project Number
460-22
Plot Size RK
SP/EL
Date:
AUG-2022
A1
Sheet #
Rev
D-02-003A
00
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY.
315°
05
06 07 09
10 11
12
NE
N
04
NW
02 03
13
225°
01
2. DO NOT SCALE FROM THE DRAWINGS.
SW
45°
SE
3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
135°
6. ALL SUBMISSIONS AND DRAWINGS ARE FOLLOWING M/S DDA AND M/S EMAAR REGULATIONS. KEYPLAN:
DRAINAGE LEGEND SYMBOL FT
FLOOR TRAP
CO
CLEAN OUT
WC
WC DRAIN POINT
WB
WASH BASIN DRAIN POINT
MH
MANHOLE
SMH
STORM WATER MANHOLE
CB
CATCH BASIN
ST
SAND TRAP
A1
CANOPY
A
DESCRIPTION
B A2 FIRE PIT
C
+8.60
OPEN TO SKY OPEN TO SKY
ROOF LOUNGE 42m2 +9.20
A3 Jacuzzi 6 m2
+8.90 CO
Ø110 mm WP
WP PROVISION FOR JACUZZI
m RWP
Ø110 m
PBM
T/B
PRESSURE BREAK MANHOLE
PLD
D
FT Ø110 mm RWP T/B
RWO
A4
RWO
CO
Ø82 mm PDP
m SP Ø110 mm VP Ø50 mmm WP Ø110
GULLY TRAP
RKG
ROAD KERB GULLY
A5
ER N REF PLAN UATIO LEVEL ONTIN FOR C LOOR HIGH F FIRST
FOR CONTINUATION REFER FIRST FLOOR HIGH LEVEL PLAN
GT
GREASE TRAP
2
00m
BBQ 2
E
RWO
RAIN WATER OUTLET
+8.65
F
CHANNEL GRATING
OPEN TO SKY SERVICE AREA
RWO
Date
Checked
Authorized
Rev
Date
Authorized
PRESSURE LINE
REFLECTIVE POOL
+8.60
Description
Rev
Ø110 mm RWP T/B
KITCHEN WASTE LINE
G
SOIL LINE
A6
WASTE LINE
+8.60
H
VENT LINE RAIN WATER LINE
J
PDP (PLANTER DRAIN PIPE) SOIL LINE HIGH LEVEL
K
A E ARE SERVIC +8.60
SIDE ENTRANCE
REFLECTIVE POOL
MAIN ENTRANCE
m RWP
Ø110 m
T/B
VENT LINE HIGH LEVEL
A7 GV
GATE VALVE
H/L
HIGH LEVEL
U/G F/A
UNDER GROUND PIPE
F/B +8.25
CANOPY
FROM ABOVE FROM BELOW
T/B
TO ABOVE TO BELOW
DN
DOWN
CL IL
COVER LEVEL
T/A ENTRY FRAME
Client:
FLOW DIRECTION
RWO
+9.45
L
Purpose of issue
WASTE LINE HIGH LEVEL
INVERT LEVEL
MR. MOHAMED YASIN FARUQE
Project Title:
PRIVATE VILLA (B+G+1+R) DUBAI HILLS, DUBAI, UAE PLOT NO.: - 6316624 Consultant:
08
ROOF FLOOR PLAN ALL DRAINAGE PIPES RUNNING AT HIGH LEVEL OF DRY AREA SHALL BE ACOUSTIC INSULATED
Main Contractor:
Subconsultant/ Subcontractor:
Drawing title:
ROOF FLOOR PLAN DRAINAGE SYSTEM
LOW LEVEL
Original Scale
Drawn
Checked SP/SJ
1:100
Authorised
Date: AUG-2022
Date:
AUG-2022
Project Number
460-22
Plot Size RK
SP/EL
Date:
AUG-2022
A1
Sheet #
Rev
D-02-004
00
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY.
315°
2. DO NOT SCALE FROM THE DRAWINGS.
NE
N
NW
135°
WP FROM ROOF FLOOR SP FROM ROOF FLOOR FROM RAIN OUTLET IN ROOF
3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS. 6. ALL SUBMISSIONS AND DRAWINGS ARE FOLLOWING M/S DDA AND M/S EMAAR REGULATIONS. KEYPLAN:
DRAINAGE LEGEND SYMBOL
WP
225°
SW
45°
SE
DESCRIPTION
FT
FLOOR TRAP
CO
CLEAN OUT
WC
WC DRAIN POINT
WB
WASH BASIN DRAIN POINT
MH
MANHOLE
SMH
STORM WATER MANHOLE
CB
CATCH BASIN
ST
SAND TRAP
SP
WP
RWP
SP FROM GROUND FLOOR WP FROM GROUND FLOOR
SP WP FROM FIRST FLOOR SP FROM FIRST FLOOR
PBM
WP
PRESSURE BREAK MANHOLE
GT
GULLY TRAP
RKG
ROAD KERB GULLY
WP
SP
SP
GREASE TRAP RWO
RAIN WATER OUTLET CHANNEL GRATING Description
Rev
Date
Checked
Authorized
Rev
Date
Authorized
PRESSURE LINE RWP
SP
WP
WP
SP
KITCHEN WASTE LINE SOIL LINE WASTE LINE
SP FROM GROUND FLOOR WP FROM GROUND FLOOR
WP FROM GROUND FLOOR SP FROM GROUND FLOOR
VENT LINE RAIN WATER LINE PDP (PLANTER DRAIN PIPE)
FREE DISCHARGE TO GROUND LEVEL
RWP
SOIL LINE HIGH LEVEL
Purpose of issue
WASTE LINE HIGH LEVEL VENT LINE HIGH LEVEL FLOW DIRECTION
WP SP GT
SP
WP
WP
SP SP
WP
WP FIC
MH-01
SP
TO AUTHORITY MANHOLE
GV
GATE VALVE
H/L
HIGH LEVEL
U/G F/A
UNDER GROUND PIPE
F/B PRESSURE PIPE
FROM ABOVE FROM BELOW
T/B
TO ABOVE TO BELOW
DN
DOWN
CL IL
COVER LEVEL
T/A PBMH
Client:
INVERT LEVEL
MR. MOHAMED YASIN FARUQE
Project Title:
PRIVATE VILLA (B+G+1+R) DUBAI HILLS, DUBAI, UAE PLOT NO.: - 6316624 Consultant:
SUMP PIT Main Contractor:
Subconsultant/ Subcontractor:
Drawing title:
RISER DIAGRAM DRAINAGE SYSTEM Original Scale
Drawn
Checked SP/SJ
1:100
Authorised
Date: AUG-2022
Date:
AUG-2022
Project Number
460-22
Plot Size RK
SP/EL
Date:
AUG-2022
A1
Sheet #
Rev
D-02-005
00
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY.
315°
NE
225°
NW
135°
N
2. DO NOT SCALE FROM THE DRAWINGS.
SW
45°
SE
3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS. 6. ALL SUBMISSIONS AND DRAWINGS ARE FOLLOWING M/S DDA AND M/S EMAAR REGULATIONS. KEYPLAN:
Description
Rev
Purpose of issue
Date
Checked
Authorized
Rev
Date
Authorized
Client:
MR. MOHAMED YASIN FARUQE
Project Title:
PRIVATE VILLA (B+G+1+R) DUBAI HILLS, DUBAI, UAE PLOT NO.: - 6316624 Consultant:
Main Contractor:
Subconsultant/ Subcontractor:
Drawing title:
Original Scale
STANDARD DETAILS FIRE FIGHTING SYSTEM Drawn
Checked SP/SJ
1:100
Authorised
Date: AUG-2022
Date:
AUG-2022
Project Number
460-22
Plot Size RK
SP/EL
Date:
AUG-2022
A1
Sheet #
Rev
F-00-001
00
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY.
315°
2. DO NOT SCALE FROM THE DRAWINGS.
NE
4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS.
NW
N
3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER.
225°
SW
45°
SE
5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
135°
6. ALL SUBMISSIONS AND DRAWINGS ARE FOLLOWING M/S DDA AND M/S EMAAR REGULATIONS.
L OT
P
L
T
MI L I
P
L OT
I MI T
KEYPLAN:
01
02 03
04
05
06 07 09
10 11
12
13
PUMPROOM & BALANCE TANK
Maneuvering Parking
A1
A B TV
TOILET
A2
DRIVER'S -3.20
SHOW GARAGE 192 m2
LEGENDS I NO I
PREVENT I
S
O
O
Authorized
NO I
UKAS QUALITY MANAGEMENT 007
I
C ERT
F
S
NO I
PREVENT I
S
O
I
L
B A
RD
L
S
S
B
I
S
O
RD
O
Date
F
T CA
O
Rev
UKAS QUALITY MANAGEMENT
I
S PREVENT
L
H APPRO TIS RI
Authorized
I
C ERT
A
ON
Checked
007
B
S
H APPRO TIS RI
RD
N IO
Date
F
T CA
B
I
S
SH APPRO ITI
C ERT
A
IPM EQU ENT
BR
E
LS FOR F R VA
E
6 KG DCP EXTINGUISHER -KITEMARK/LPCB APPROVED
A5
LS FOR F R VA
P EQUI MENT
2 KG DCP EXTINGUISHER -KITEMARK/LPCB APPROVED
A4
ON
E
D
N SUNKE EN GARD
Description
Rev LS FOR F R VA
B
A SHISH E LOUNG 20 m2
5 KG CO2 FIRE EXTINGUISHER -KITEMARK/LPCB APPROVED
I
ENTRANCE
DESCRIPTION T CA
MAID'S 19 m2
SYMBOL
A3
-3.15
P EQUI MENT
-3.18
E
-3.15
I
C
UKAS QUALITY MANAGEMENT 007
FIRE BLANKET -3.20
KIT
F
Purpose of issue Client:
-3.20
SERVICE ENTRANCE
G
MR. MOHAMED YASIN FARUQE
A6
-3.15 -3.15
H ELEC. 6 m2 SERVICE ENTRANCE
J
MECHANICAL 12 m2
LAUNDRY 12 m2
G GAMIN M O O R N OPE 2 m 26
K
Project Title:
PRIVATE VILLA (B+G+1+R) DUBAI HILLS, DUBAI, UAE PLOT NO.: - 6316624
A CINEM 2 25.0 m E 00 WID INDY5
E 00 WID INDY5
-3.15
A7
E 00 WID INDY5
Consultant: WATER TANK 12 m2
N SCREE
PUMP ROOM & BALANCETANK 13 m2
L
Main Contractor:
P
08
L I
MI
T
L I
MI
L OT
T
Subconsultant/ Subcontractor:
Drawing title:
BASEMENT FLOOR PLAN FIRE FIGHTING SYSTEM Original Scale
Drawn
Checked SP/SJ
1:100
Authorised
Date: AUG-2022
Date:
AUG-2022
Project Number
460-22
Plot Size RK
SP/EL
Date:
AUG-2022
A1
Sheet #
Rev
F-01-001
00
P
L OT
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY.
315°
SE
2. DO NOT SCALE FROM THE DRAWINGS.
L OT
4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS.
45°
NW
N
P
L OT
225°
SW
I MI T
NE
P
T
CE
3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER.
L
M I PARKW L I A ENTRA Y N
5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
135°
01
02 03 SUNKEN 04
05
LOUNGE
06 07 09 JACUZZI
10 11
FIRE PLACE
FIRE PIT +0.45
12
13
6. ALL SUBMISSIONS AND DRAWINGS ARE FOLLOWING M/S DDA AND M/S EMAAR REGULATIONS.
SWIMMING POOL
+0.45
-1.35
KEYPLAN:
+0.40
-0.20
+0.20
+0.35
+0.35
-0.20
OUTDOOR LIVING 57.0 m2
A
A1
COUNTER
B
+0.40 -3.20
-0.20
BBQ
A2
C +0.35
OPEN TO SKY
OPEN TO ABOVE
2
55.0 m
A3
n Sunke n e d Gar
I NO I
PREVENT I
S
O
I
O
NO I
S
O
PREVENT
Authorized
007
I
C ERT
F
NO I
PREVENT I
S
O
B A
RD
S
O
Date
UKAS QUALITY MANAGEMENT
I
L
L
H APPRO TIS RI
I
S
O
RD
S
H APPRO TIS RI
Rev
UKAS QUALITY MANAGEMENT
F
T CA
B
I
S
SH APPRO ITI
C ERT
A
IPM EQU ENT
Authorized
007
B
E
ON
Checked
I
N IO
Date
F
T CA
LS FOR F R VA
C ERT
A
P EQUI MENT
BR
6 KG DCP EXTINGUISHER -KITEMARK/LPCB APPROVED
BANQUETING AREA 6.20m2
A6
LS FOR F R VA
E
2 KG DCP EXTINGUISHER -KITEMARK/LPCB APPROVED
ON
B
-3.20
Description
Rev LS FOR F R VA
T CA
5 KG CO2 FIRE EXTINGUISHER -KITEMARK/LPCB APPROVED
REFLECTIVE POOL
CHEF'S KITCHEN 14.40 m2
DESCRIPTION P EQUI MENT
OPEN TO SKY
SYMBOL
E
F
G
LEGENDS
SUITE GUEST 2 26.0 m
B
E
A5
S
+0.40
S
TOILET 4.30 m2
A4
L
DINING 37.0 m2
RD
TV
D
I
LIVING
I
SHOW KITCHEN 30.0 m2
UKAS QUALITY MANAGEMENT 007
H FIRE BLANKET +0.45
+0.45
J PANTRY
K
TOILET 8.50 m2
Client:
SUITE GUEST 2 28.0 m
+0.40 SIDE ENTRANCE
SIDE ENTRANCE
Purpose of issue
+0.35
FOYER 14.0 m2
SUITE GUEST 2 30.0 m REFLECTIVE POOL
MAIN ENTRANCE
MR. MOHAMED YASIN FARUQE
A7
+0.40
Project Title:
PRIVATE VILLA (B+G+1+R) DUBAI HILLS, DUBAI, UAE PLOT NO.: - 6316624
-0.20
L
+0.35
+0.35 GARBA GE ELECT. RM RM. +7.66 UTILITY FFL ROOM+7.66 FFL
MI
08
L OT
0.00
0.00 +0.05
T
P 0.00
MI
LPG M ETER
L I
L OT
L I
+0.35 -0.05
P
T
Consultant:
GATE LEVEL 0.00
Main Contractor:
DRIVEWAY
Subconsultant/ Subcontractor:
Drawing title:
ROAD
GROUND FLOOR PLAN
GROUND FLOOR PLAN FIRE FIGHTING SYSTEM Original Scale
Drawn
Checked SP/SJ
1:100
Authorised
Date: AUG-2022
Date:
AUG-2022
Project Number
460-22
Plot Size RK
SP/EL
Date:
AUG-2022
A1
Sheet #
Rev
F-01-002
00
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY.
315°
NE
NW
N
225°
4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
135°
P
L
MI
3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER.
6. ALL SUBMISSIONS AND DRAWINGS ARE FOLLOWING M/S DDA AND M/S EMAAR REGULATIONS.
L OT
T
L I
2. DO NOT SCALE FROM THE DRAWINGS.
SW
45°
SE
P
L OT
I MI T
KEYPLAN:
01
02 03
04
05
06 07 09
3
4" C.S Pipe Sch.40
10 11
12
13
T/A
BALL VALVE
PUMPROOM & BALANCE TANK
Maneuvering Parking
A1
A B 3
4" C.S Pipe Sch.40
T/A TV
TOILET
A2
BALL VALVE
DRIVER'S -3.20
C
SHOW GARAGE 192 m2 -3.15
-3.18
MAID'S 19 m2
ENTRANCE
A3
-3.15
A SHISH E G N U O L 2 m 20
D
N SUNKE EN GARD
Description
Rev
Date
Checked
Authorized
Rev
Date
Authorized
A4
A5
E -3.20
KIT
F
Purpose of issue Client:
-3.20
SERVICE ENTRANCE
G
MR. MOHAMED YASIN FARUQE
A6
-3.15 -3.15
H MECHANICAL 12 m2
K
4" C.S Pipe Sch.40 @ H/L RUNNING INSIDE SLEEVE PIPE
PRDP
Gas Leak Detector
G
A7 Consultant:
0 WIDE INDY50
4" C.S Pipe Sch.40 @ H/L
RUNNING INSIDE SLEEVE PIPE WATER TANK 12 m2
PRIVATE VILLA (B+G+1+R) DUBAI HILLS, DUBAI, UAE PLOT NO.: - 6316624
A CINEM 2 m .0 25
-3.15 3
Project Title:
G GAMIN M ROO N E P O 26 m2
3
WIDE
LAUNDRY 12 m2
0 INDY50
BALL VALVE
SERVICE ENTRANCE
J
T/A
WIDE
4" C.S Pipe Sch.40
0 INDY50
3
ELEC. 6 m2
N SCREE
PUMP ROOM & BALANCETANK 13 m2
L FOR CONTINUATION REFER GROUND FLOOR PLAN
Main Contractor:
P
08
L I
MI
T
L I
MI
L OT
T
Subconsultant/ Subcontractor:
Drawing title:
BASEMENT FLOOR PLAN GAS SYSTEM Original Scale
Drawn
Checked SP/SJ
1:100
Authorised
Date: AUG-2022
Date:
AUG-2022
Project Number
460-22
Plot Size RK
SP/EL
Date:
AUG-2022
A1
Sheet #
Rev
G-00-001
00
P
L OT
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY.
315°
SE
NE
45°
P
P
N
NW
L OT
I MIT 135°
01
02 03 SUNKEN 04
05
LOUNGE
06 07 09 JACUZZI
10 11
FIRE PLACE
FIRE PIT +0.45
12
225°
SW
PARKW A ENTRA Y NCE
L
MI
T
L I
L OT
2. DO NOT SCALE FROM THE DRAWINGS. 3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS. 6. ALL SUBMISSIONS AND DRAWINGS ARE FOLLOWING M/S DDA AND M/S EMAAR REGULATIONS.
13
KEYPLAN:
SWIMMING POOL
+0.45
-1.35
+0.40
PROVISION FOR FIRE PLACE
-0.20
+0.20
+0.35
+0.35
-0.20 3
4" C.S Pipe Sch.40
F/B OUTDOOR LIVING 57.0 m2
A
A1
COUNTER
B
+0.40 PROVISION FOR OUTDOORBBQ KITCHEN
-3.20
-0.20
A2
C
3
4" C.S Pipe Sch.40
F/B
+0.35
OPEN TO SKY
OPEN TO ABOVE
SHOW KITCHEN 30.0 m2
LIVING
2
55.0 m
A3
TV
D
n Sunke n e d r a G
TOILET 4.30 m2 +0.40
E
BANQUETING AREA 6.20m2
DINING 37.0 m2
A5
OPEN TO SKY
BALL VALVE
Gas Leak Detector, 230V AC, +30cm F.F.L
H
-3.20
A6
ES
+0.45
+0.45
3
4" C.S Pipe Sch.40
K
T/A @ H/L
S.No.
PRDP LABEL DETAIL
1
BALL VALVE
Rev
Date
Authorized
1
SOLENOID VALVE
3
PRESSURE REGULATOR, 4Kg, 75/37mbar
4
PRESSURE GAUGE, 0-100mbar ENCLOSURE
4
1 1
3
2
5
TOILET 8.50 m2
2 GAS METER
1
G
Purpose of issue Client:
+0.35
FOYER 14.0 m2
SUITE GUEST 2 m .0 8 2
+0.40 SIDE ENTRANCE
FROM DEVELOPER GAS NETWORK
SUITE GUEST 2 .0 30 m
SIDE ENTRANCE
Authorized
5
J PANTRY
Checked
TO KITCHEN
KG
Emergency Gas On/Off Switch With LED Indicator @ +120cm From F.F.L
Date
REFLECTIVE POOL
CHEF'S KITCHEN 14.40 m2
CONNECTION TO CCOKER
Description
Rev
SUITE GUEST 2 m .0 6 2
F
G
A4
REFLECTIVE POOL
MAIN ENTRANCE
MR. MOHAMED YASIN FARUQE
A7
+0.40
Project Title:
FOR CONTINUATION REFER BASEMENT FLOOR PLAN
L
PRIVATE VILLA (B+G+1+R) DUBAI HILLS, DUBAI, UAE PLOT NO.: - 6316624
-0.20 +0.35
Consultant: GARBA GE ELECT. RM RM. +7.66 UTILITY FFL ROOM+7.66 FFL
3
GAS P
ip
+0.35
MI
3
08
L OT
-0.05
P
T
4" GAS Pipe @ U/G
0.00
0.00 +0.05
T
P 0.00
ETER
MI
LPG M
L OT
FROM DEVELOPER GAS NETWORK
L I
L I
4"
G /+0.35 e@U
GATE LEVEL 0.00
DRIVEWAY
Main Contractor:
Subconsultant/ Subcontractor:
Drawing title:
GROUND FLOOR PLAN GAS SYSTEM
ROAD
GROUND FLOOR PLAN
Original Scale
Drawn
Checked SP/SJ
1:100
Authorised
Date: AUG-2022
Date:
AUG-2022
Project Number
460-22
Plot Size RK
SP/EL
Date:
AUG-2022
A1
Sheet #
Rev
G-00-002
00
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY.
315°
FILAT FILTER
M
ROOF FINSH
ES FF
BF
HW
T
R
C
H
H
NOTES:-
CO2
EHC
P
SILENCER
FC
SUPPLY FAN
C
BAG FILTER
FILAT FILTER
M
Sight Glass
NE
N
135°
LIQUID LINE SUCTION LINE
Shut Off Valve Filter Dryer
H
NW
T
EXTRACT FAN
225°
SILENCER
M EF
FF
2. DO NOT SCALE FROM THE DRAWINGS.
SW
45°
SE
3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS. 6. ALL SUBMISSIONS AND DRAWINGS ARE FOLLOWING M/S DDA AND M/S EMAAR REGULATIONS. KEYPLAN:
1- ALL DIMENSIONS IN MILLIMETER AND METER OTHERWISE MENTIONED.
C
2- THE CONTRACTOR SHALL BE RESPONSIBLE FOR CO-ORDINATION OF ALL SERVICES.
SF
3- ANY KIND OF CIVIL WORKS SUCH AS FOUNDATIONS FOR EQUIPMENT WITH VIBRATION
FRESH AIR HANDLING UNIT DETAILS
TYPICAL CONDENSING UNIT SECTIONAL DETAIL SCALE
NTS
ISOLATING CORK, PROPER WATER PROOFING Etc. AND NECESSARY OPENINGS IN WALL/
T= TEMPERATURE SENSOR M= MOTORIZED DAMPER H= HUMIDITY SENSOR
CEILING WITH ACCESS DOORS WHERE APPLICABLE, AND MAKING GOOD OF OPENINGS
Condensing Unit
AFTER SERVICES INSTALLATION Etc. BY MAIN CONTRACTOR. 4- INSULATED DRAIN POINT NEAR ALL A/C. UNITS TO BE PROVIDED BY PLUMBING/M.C.
S.A.&R.A.DUCT
5- 25mm. CONDUITING FOR CONTROL WIRES FROM THEMOSTAT TO INDOOR A/C. UNIT BY
50MM THICK FIBER GLASS INSULATION 6 oz CANVASS CLOTH WRAPPING A/C DUCT FLEXIBLE CONNECTION
FCU
'U' TRAP CLEAN OUT
ELECTRICAL MAIN CONTRACTOR.
TO BE WATER PROOF 25mm THK.WOODEN FRAME
6- RECOMMENDED LOCATION OF THERMOSTAT IS 5'-0" FROM F.F.L NEAR ELECTRIC SWITCHES. Filter Dryer Shut Off Valve
FALSE CEILING
8- WOODEN FRAMES, BOXING, SLEEVES IN FLOOR/WALL WHERE REQUIRED TO BE PROVIDED
Sight Glass
100
DRAIN PIPE CONCEALED IN WALL TO THE NEAREST FLOOR TRAP TYP. (BY OTHERS)
7- POWER SUPPLY WITH ISOLATOR NEAR A/C. UNIT TO BE PROVIDED BY ELEC./M.C.
Suction Line
Fan Coil Unit With DX Coil
PAC
Liquid Line
25MM THICK FIBER GLASS INSULATION 100
BY MAIN CONTRACTOR. 9- ALL INDOOR DUCTS IN CONDITIONED AREAS TO BE INSULATED WITH 1" THICK 24 Kg/M
3
ALUMINUM FOIL FACED FIBERGLASS RIGID BOARD FINISHED WITH 6 Oz. CANVAS CLOTH WRAPPING AND 2 COATS OF IVS-30. 3 10- ALL OUTDOOR DUCTS ON ROOF TO BE INSULATED WITH 2" THICK 48 Kg/M ALUMINUM
NEOPRENE PAD
FOIL FACED FIBERGLASS RIGID SLAB FINISHED WITH 8 Oz. CANVAS CLOTH, 2 COATS OF
CONCRETE FOUNDATION
IVS 30 AND 0.8mm. THICK ALUMINUM CLADDING. (Anodized)
TYPICAL MOUNTING DETAIL FOR PACKAGED UNITS
FLOOR TRAP
Condensate "U" Trap
TYPICAL F.C.U INSTALLATION DETAILS. To Floor Drain
11- ACOUSTIC LINING FOR ALL DUCTS MINIMUM 3 METERS FROM EACH UNIT TO BE PROVIDED 3 WITH 1/2" THICK 32 Kg/M SOUND LINER 12- ALL INDOOR UNITS TO BE PROVIDED WITH ANTI VIBRATION HANGERS SPRING TYPE.
SLAB AS PER STRUCTURAL DETAIL (BY OTHERS)
ØID INSULATED FLEXBLE CIRCULAR DUCT (MAXIMUM 800mm LONG.)
13- VCD'S TO BE PROVIDED AT ALL BRANCH DUCTS .
Extend Straightening Vanes To This Line.
Air Supply Duct
14- ALL DUCT SUPPORTS TO BE PROVIDED WITH 50mm. THICK MIN. WOODEN BATTEN ON BOTTOM 15- ALL THERMOSTAT TO BE 3 SPEED, DIGITAL, ELECTRONIC AND PROGRAMMABLE.
AIR FLOW
AIR FLOW
16- THE EQUIPMENT TO BE SELECTED AT ON COIL CONDITION OF 76°F DB AND 63°F WB. 17- ALL F.C.U'S TO BE SELECTED AT MEDIUM SPEED.
(HxW) 24 GAGE GI PLINIUM BOX WITH 6mm ACCOUSTIC LINING COMPLETE WITH 1" (48Kg/m3) THERMAL INSULATION & VAPOUR RETARDER AS PER DUCT THERMAL INSULATION DETAILS.
600mm MINIMUM CLEARANCE ABOVE FALSE CEILING UNLESS OTHER WISE SPECIFIED
Opposed Blade-Key Operated Damper Section
Straightening Vanes At 3" O.C. Max.
18- FACE VELOCITY AT GRILLE/DIFFUSERS SHOULD BE MAXIMUM 500 FPM. 19- THE MAXIMUM LENGTH FOR FLEXIBLE DUCT IS 1.0 METER. 20- ALL DUCTS MUST BE SIZED VELOCITY WISE.
Description
Rev
Date
Checked
Authorized
Rev
Date
Authorized
21- ALL REFRIGERATION PIPE IN SULATION SHALL BE 1/2" THICK INSIDE AND 3/4" THICK Rubber Gasket All Around 600mm (2'-0")
2-SLOT
PLINIUM SIZE (H x W)
150 mm
550 mm
(12" x 8")
6"
1' : 2"
300 x 250 mm
200 mm
650 mm
(12" x 10")
8
2" : 2"
3-SLOT
22- PROVIDE FILTER DRYER AND SIGHT GLASS WITH VALVES FOR LIQUID LINE OF REFRIGERANT.
FLEXIBLE CONNECTION
23- PROVIDE U.V. RELAY FOR EACH CONDENSING UNITS.
Supply Air Register
FLEXIBLE CONNECTION FLEXIBLE CONNECTION CFM/MTR Ø ID mm (in) INTERVAL
300 x 200 mm
ALONG THE LENGTH.
AIR FLOW
1" MAXIMUM NO. OF SLOTS
OUTSIDE OF CLOSE CALL RUBBER-ARMAFLEX MAKE WITH CANVAS AND FASTER (W.P.) ALL
Wall or Ceiling Concealed Fixing Air Supply Register
Rear Bars
FALSE CEILING (BY OTHERS)
24- ALL CONDENSATE DRAINAGE PIPES SHALL BE UPVC, STARTING WITH 3/4" FROM EACH
200
Air Supply Duct
RIGID NICK
300
MACHINE AND INSULATED. 25- ALL TERMINAL DEVICES SHALL BE CONNECTED TO THE DUCT BY MEANS OF SUITABLE
Note: ALL SLOT DIFFUSERS SHALL BE 2-SLOT FULL LENGTH DIFFUSERS WITH SUPPLY LENGH SUFFECIENT TO DELIVER THIS SPECIFIED CFM AS PER DRAWINGS, UNLESS OTHERWISE INDICATED.
FLEXIBLE CANVAS CONNECTION.
AIR FLOW
AIR FLOW
27- ALL TERMINAL BRANCHES SHALL BE AT LEAST 1'-6" LONG BEFORE CONNECTING THE TERMINAL DEVICES. Heavy Felt Gasket-Cement To Sides Of ducts. Air Distributing Grid
Ceiling Slot Diffuser Insullation Detail VARIABLE SIZE
5 CM 10 CM
Opposed Blade-Key Operated Damper Section
Extension Duct Coller
Purpose of issue Client:
28- THE SIZE & LOCATION OF SLAB OPENINGS ARE APPROXIMATE & NOT TO SCALE. 29- THE EXACT SIZE & LOCATION OF THE A/C. SLAB OPENINGS SHALL BE COORDINATED WITH
MR. MOHAMED YASIN FARUQE
STRUCTURAL DRAWINGS AS PER THE ACTUAL DUCT SIZE TO BE INSTALLED. 30- THE FCU, SHALL BE CEILING SUSPENDED WITH SUIABLE ANTI-VIBRATION SPRING MOUNTINGS
10 CM
Rubber Gasket All Around
Wall or Ceiling Concealed Fixing Air Supply Register
Rear Bars
R.C.C
(50% STATIC 1" DEFLECTION) 31- ALL DUCT UP TO (15 Ft) FROM ANY MACHINE OUTLET SMALL BE SUSPENDED WITH SUITABLE
25 CM CORK
SPRING MOUNTINGS (50% STATIC TRAVEL , 1" DEFLECTION)
AIR FLOW
Supply Air Register
R.C.C
Project Title:
32- CONTRACTOR MUST PROCEED AIR BALANCE IN THE SYSTEM BEFORE INSULATION WORKS.
PRIVATE VILLA (B+G+1+R) DUBAI HILLS, DUBAI, UAE PLOT NO.: - 6316624
33- ALL TOILETS AND KITCHENS TO BE NEGATIVE PRESSURE AREAS.
FOUNDATION DETAIL OF A/C UNIT
34- GREASE-TIGHT ACCESS PANEL WITH GREASE AND HEAT RESISTANT GASKETS TO BE PROVIDED Use This Method Whenever Ducts Can Be Grouped Together FOR KITCHEN EXTRACT DUCT. 35- MAINTAIN AT LEAST 3 M CLEARANCE BETWEEN ANY MECHANICAL EQUIPMENT ON ROOF FROM THE Washer
WALL
POINTS OF EXTRACT DISCHARGE FROM TOILETS, KITCHENS OR PLUMBING VENT PIPES.
Consultant:
36- MAINTAIN AT LEAST 1.2 M CLEARANCE BETWEEN ALL MECHANICAL EQUIPMENT ON ROOF AND THE GAP TO BE 3mm PER SIDE FOR DAMPERS UP.
Bottom Chord Of Steel Joist.
BUILDING WALLS. 37- DUCTS WIDTH UPTO 60 CM TO BE G-24, DUCTS WIDTH FROM 60 CM UPTO 100 CM TO BE G-22,
DUCT WORK CONNECTION.
DUCT WORK CONNECTION.
See Project Drawings For Number & Size
DUCTS WIDTH FROM 100 CM UPTO 150 CM TO BE G-20, DUCTS WIDTH FROM 150 CM UPTO 225 CM
5/8" All Thread Rod
TO BE G-18.
FIRE DAMPER
38- CONTRACTOR MUST SUBMIT COMPLETE ACOUSTICAL STUDY FOR THE A/C AND VENTILATION SYSTEM AND GET ENGINEER'S APPROVAL. 39- CONTRACTOR SHALL ADD AND PRICE ANY ITEM NOT OTHERWISE SHOWN IN DRAWINGS, ACCESS PANEL
OTHERWISE THIS SHALL BE DEMAND TO BE INCLUDED.
Locking nut
Main Contractor:
40- THE CONTRACTOR SHOULD FOLLOW NFPA-90A AND TO HAVE MINIMUM COMPLIANCE TO THE FOLLOWING: A) PIPE INSULATION AND COVERINGS , DUCT COVERINGS, DUCT LININGS, ADHESIVES, FASTENERS, TAPES,
38 x 38 x 6 mm STEEL ANGLE MIN. ALL AROUND SLEEVE.
AND SUPPLEMENTARY MATERIALS ADDED TO AIR DUCTS, PLENUMS, PANELS AND DUCT SILENCERS USED Support nut
IN DUCT SYSTEMS, SHALL HAVE A MAXIMUM FLAME SPREAD INDEX OF 25 WITHOUT EVIDENCE OF CONTI2.1/2"x2.1/2"x1/4" Angle (Where Length Of Angle Exceeds GFT. Use Inertmediate Support)
6mm BOLTS AT 225 CENTRES
-NUED PROGRESSIVE COMBUSTION AND A MAXIMUM OF SMOKE DEVELOPED INDEX OF 50 WHEN TESTED IN ACCORDANCE WITH NFPA 255, STANDARD METHOD OF TEST OF SURFACE BURNING CHARACTERISTICS
SUPPORT WALL
Typical Fire Damper Installation Details.
Multiple Duct Runs On Trapeze Hangers Low Pressure Ductwork (Upthru 2" WG)
(NTS)
OF BUILDING MATERIALS.
Subconsultant/ Subcontractor:
B) FIRE DAMPERS SHALL HAVE FIRE PROTECTION RATING IN ACCORDANCE WITH UL 555, STANDARD FOR SAFETY FIRE DAMPERS. C) SMOKE DAMPERS SHALL BE CLASSIFIED IN ACCORDANCE WITH UL 555S, STANDARD FOR SAFETY SMOKE DAMPERS. 41- EXHAUST DUCT FOR LABORATORY TO BE FINALISED BY SPECILAIST.
FRESH AIR
RETURN DUCT
PKU
42- AC CONDENSATE DRAINAGE SYSTEM TO PROVIDED BY PLUMBING/MAIN CONTRACTOR
Drawing title:
GENERAL NOTES AND DETAILS HVAC SYSTEM
MIXINGBOX
SAND TRAP LOUVER WITH MESH SUPPLY AIR
SUPPLY DUCT
RETURN AIR
Original Scale
Drawn
Checked SP/SJ
1:100
Authorised
Date: AUG-2022
Date:
AUG-2022
Project Number
460-22
Plot Size RK
SP/EL
Date:
AUG-2022
A1
Sheet #
Rev
M-00-001
00
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY.
315°
N
STEEL ROD HANGER ANCHORED TO CONCRETE SLAB SHEET METAL DUCT
SLEEVE 15 GA. MIN DUCT
INSULATION (IF ANY)
SHUTTER
SEALED SPLICE SEALANT
WATERPROOFING MEMBRANE 50x75 WOODEN
STEEL SPRING ISOLATION BRACKETS BY FAN MANUFACTURER
FRAME ROOF SLAB WALL
AXIAL FAN AXIAL FLOW FAN OR VARIABLE PITCH IN MOTION FAN NOTE:
6mm-20 NC HEX. BOLTS OR 3mm∅ POP RIVETS (NO SELF-TAPPING SM SCREWS - TYP.)
ROOF CURB FAN INSTALLATION DETAILS
50mm MIN STATIC DEFLECTION UNHOUSED SPRING TYPE VIBRATION ISOLATION MOUNTINGS. No. OF ISOLATORS TO VARY DEPENDING ON BASE SIZE & WT. ACTUAL SPRING STATIC DEFLECTION/ TRANSMISSIVITY TO BE SELECTED SO THAT THE NOISE LEVEL IN ADJACENT ROOMS DOES NOT EXCEED SPECIFIED LEVELS.
INERTIA BASE IS TO BE SIZED SUCH THAT ITS MASS IS 2.4 TIMES THAT OF THE M/C. 3
THAT IT SUPPORTS (DENITY OF CONC. = 2500 Kg/M)
WALL MOUNTED EXHAUST FAN INSTALLATION DETAILS (DUCTED)
TYPICAL INERTIA BASE FOR PUMP ACCOUSTIC /ANTI-VIBRATION DETAILS
LOW PRESSURE DUCT TRAPEZE ANGLE (FOR SIZES SEE SCHEDULE)
INSULATION
DUCT SUPPORT SCHEDULE MAX. DIMENSION MAXIMUM SUPPORT SUPPORTED SIZE DISTANCE ROD SIZE (MM) HORIZONTAL (MM)
TRAPEZE ANGLE SIZE (MM)
UP TO 305 501-1500
3000 2400
8 10
25x25x16 GA.
1501-3000
2400
10
50x50x6
3001-6000
1200
10
63x63x5
25x25x6
100mm WIDE G.I. NO.16 INSULATION SHIELD
AIR DUCT HARD WOOD TWICE WITH ANTI-RUST PAINT BETWEEN DUCT AND METAL SUPPORT FASTENED BY SELF DRILLING SCREW CONCRETE PLINTH
0 - 460
0 - 760
10 DIA., 25 x 25 x 3 @ 2.4
480 - 760
530 - 1220
10 DIA., 40 x 40 x 3 @ 1.8
790 - 1520
790 - 1520
10 DIA., 50 x 50 x 6 @ 1.8
INSULATION WITH VAPOR BARRIER GALV. STL. DOUBLE NUTS & WASHERS
ANGLE BRACING (SEE NOTE)
MILD STEEL ANGLE
FOR DIMENSIONS ABOVE 2400 (HORIZONTAL SIDE) AND ABOVE 1200 (VERTICAL SIDE), REFER TO TABLES 5-1 AND 5-3 FROM SMACNA LOW PRESSURE DUCT CONSTRUCTION STANDARDS.
DUCT HANGER & SUPPORT DETAILS
KEYPLAN:
1. FOR SEVERAL DUCTS ON ONE HANGER TYPE 'B', 'C', OR 'D' MAY BE USED. SIZE OF HANGER WILL BE SELECTED ON THE SUM OF DUCT WIDTHS EQUAL TO MAX. WIDTH OF DUCT SCHEDULE. 2. SCHEDULE OF ANGLES FOR BRACING TYPE 'B' 38x38x3 ANGLE, MAX. SPACING 2400 CENTERS; TYPE 'C' 38x38x5 ANGLE, MAX. SPACING 2400 CENTERS; TYPE "D" 50x50x6 MAX. SPACING 1200 CENTERS. 3. MAX. SPACING FOR TYPE "A" HANGER = 2400. DUCT SCHEDULE DUCT SIZE [mm] ROD & ANGLE DUCT WIDTH TYPE OF MM HANGER SIZES & CENTRES (METERS)
GALVANIZED STEEL HANGER ROD SIZE TYPE "B" 12 MM TYPE "C" 20 MM TYPE "D" 25 MM
DUCTWORK FABRICATED OUT OF GALVANIZED SHEET METAL
5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS. 6. ALL SUBMISSIONS AND DRAWINGS ARE FOLLOWING M/S DDA AND M/S EMAAR REGULATIONS.
1250 & ABOVE
HANGING ROD (FOR SIZES SEE SCHEDULE)
UP TO 450
'A'
475-1500
'B'
1525-2400
'C'
OVER 2400
'D'
32xGAGE 16 GALV. STL. STRAP
SHEET METAL DUCT
SHEET METAL DUCT
TYPE B, C, & D HANGER
NO.10 SHEET METAL SCREW (TYP.) INSULATION WITH VAPOR BARRIER ANGLE 50 x 50 PREFORMED GAUGE G.I. CORNER BEAD TYPE - A HANGER
Description
Rev
VIEW 'A'
DUCT SUPPORT DETAILS ON ROOF
3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS.
ANGLE IRON SUPPORT
NOTES:
ROOF CURB
NE
45°
STEEL ROD HANGER RAMSET STUD PORTION FULLY WELDED OF DUCT ANGLE IRON SUPPORT DETAIL A
135°
FRAME INFILLED WITH RE-INFORCED CONCRETE.
NW
50x75 WOODEN FRAME BONDING ADHESIVE ROOF BUILT UP
EF
CHANNEL
225°
SOLAR HEAT SHIELD H.C. PROTECTION (BITU-THENE)
SUPPORT BRACKETS FOR A/V MOUNTS ARE TO BE DESIGNED TO GIVE 25mm CLEARANCE BELOW INERTIA BASE WHEN FULLY LOADED.
2. DO NOT SCALE FROM THE DRAWINGS.
SW
SHUTTER GRILLE WITH BACKDRAFT DAMPER
M.S.ANGLE 50x50x6MM STEEL FRAME (TYP.) (DO NOT SECURE TO OPENING FRAMING EXPANSION CLEARANCE 25ON TOP, 12 ON EACH SIDE
SE
ANCHOR TO CONCRETE SLAB
Date
Checked
Authorized
Rev
Date
Authorized
DUCT HANGER DETAILS
VERTICAL DUCT SUPPORT DETAILS
SHEET METAL DUCTS
INSULATION (IF ANY)
ANGLE IRON SUPPORT COLLAR 2 GAUGE HEAVIER THAN DUCT, CAULK AND SEAL UPTURN CURB (SEE ARCH. DWGS.) ROOF FINISHING (SEE ARCH. DWGS.) ROOFING MATERIAL (REFER ARCH. DWG.)
EXTRUDED AL. OAKUM OR HEMP FILLER ALL AROUND
COUNTER FLASHING 2 GAUGE HEAVIER THAN DUCT 250 MM MIN. (SEE ARCH. DWG.)
METAL SCREW (TYP.) CMU WALL
NON-HARDENING MASTIC SEALER ALL AROUND
CONCRETE GROUT
Client:
SPACER SASH LOCK DOOR
CONCRETE WALL
BUTT HINGES
50 MM CLEAR SPACE ALL AROUND
SHEET METAL DUCT
SASH LOCK
GAGE #20 G.I. SHEETS SLEEVE ALL AROUND EXTENDED 50" ON BOTH END
VERTICAL DUCT SUPPORT DETAILS
2.DOOR SHALL BE WITH OUT INSULATION ON UN-INSULATION DUCT INSTALLATIONS.
FLEXIBLE DUCT FOR SIZES SEE PLANS PLENUM INSIDE DIMENSIONAL TABLE ( IN MM )
OPPOSED BLADE DUCT DAMPER 5 mm THK NEOPRENE RUBBER GASKET
DESCRIPTION FYREWRAP 1.5 DUCT INSULATION, ONE LAYER FILAMENT TAPE (TEMPORARY HOLD) SS BANDING STRAPS (PERMANENT HOLD) 75MM MINIMUM LONGITUDINAL OVERLAP 75MM MINIMUM OVERLAP
GLASS CLOTH LAGGING. (SEE NOTE BELOW)
Main Contractor:
FACTORY APPLIED VAPOR BARRIER RUBBER INSULATION (SEE NOTE BELOW) NON-COMBUSTIBLE ADHESIVE
100 VAPOR BARRIER TAPE
250 250
46
250 250
62
250 250
77
300 300
NOTES
93
300 300
1. PROVIDE GLASS CLOTH LAGGING + FOSTER PAINT FOR DUCTS EXPOSED INDOORS.
108
300 300
2. IN ADDITION TO ABOVE PROVIDE METAL JAKET FOR EXPOSED OUTDOORS.
123
300 300
3. PROVIDE MECHANICAL PINS & CLIPS AT 36 O.C. ON BOTTOM
NOTE.
139
300 300
AND SIDE OF DUCT W/DIMENSION GREATER THAN 600mm.
PLENUM LENGTH SHALL BE 25mm LONGER
170
300 300
THAN THE LINEAR SLOT DIFFUSER.
186
300 300
MIN.
SPECIAL SLOTTED LOCK TO ALLOW ADJUSTMENT OF COLLAR LENGTH
RUBBER WIDTH EQUAL TO WIDTH OF FLANGE
Y
L-50x50x150 mm LONG PRE FORMED GAUGE # 26 GI CORNER BEAD
28
25mm THK. LINING
G.I.BOLTS & NUTS DUCT
ITEM 1 2 3 4 5
L/S/M X
DUCT PLENUM
DUCT FLANGE AS PER DUCT SIZE
DUCT
4. INDOOR DUCT INSULATION THICKNESS
LINEAR DIFFUSER PLENUM DETAILS
= 25MM = 50MM
DUCT IN SHAFT INSULATION THICKNESS
= 50MM
INTERNAL ACCOUSTIC LINING IN DUCT WORK
= 25MM
5. ALL THERMAL INSULATION MATERIALS SHALL HAVE
VOLUME CONTROL DAMPER FIXING DETAILS
Subconsultant/ Subcontractor:
OUT DOOR DUCT / DUCT EXPOSED TO VIEW INSULATION THICKNESS
ZERO OZONE DEPLETION POTENTIAL.
SMOKE EXTRACT DUCT INSULATION DETAILS
Consultant:
26G ALUMINUM JACKET (SEE NOTE BELOW) 150 MM WIDE x GAGE 16 GI SHEET STRAP
ACCESS DOOR IN DUCT FOR FIRE DAMPER
DUCT PENETRATION THRU WALL
PRIVATE VILLA (B+G+1+R) DUBAI HILLS, DUBAI, UAE PLOT NO.: - 6316624
FLOOR SLAB
1.DOOR SHALL BE INSULATED ON INSULATED DUCT INSTALLATIONS.
OVERLAP W/SEALANT
DUCT PENETRATION THRU ROOF
Project Title:
METAL SCREW ANGLE IRON SUPPORT
NOTE: 38 x 38 x 3mm ALL AROUND
MR. MOHAMED YASIN FARUQE
BOLT INSULATION (IF ANY)
AIR FLOW
DUCT WITH OR WITHOUT INSULATION
FRAME WITH CLINCH LOCK
SPACER HINGES GASKET
GAGE #20 METAL SHEET SLEEVE ALL AROUND
ROOFING MATERIAL (SEE ARCH. DWGS.) STRUCTURAL ROOF
Purpose of issue
DUCT
Drawing title:
GENERAL NOTES AND DETAILS HVAC SYSTEM Original Scale
Drawn
Checked SP/SJ
1:100
HVAC DUCT INSTALLATION DETAILS
Authorised
Date: AUG-2022
Date:
AUG-2022
Project Number
460-22
Plot Size RK
SP/EL
Date:
AUG-2022
A1
Sheet #
Rev
M-00-002
00
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY.
315°
NOTE: ALL THERMAL INSULATION MATERIALS SHALL HAVE SE
ZERO OZONE DEPLETION POTENTIAL.
1/2" thick x 32Kg/Cu Mt accoustic liner with black neoprene fastened by pins and adhesive (if required)
NE
N
FCU /
UNION
135°
Non flammable adhesive mastic
G.I. Threaded Rod
45°
THE TOTAL STATIC PRESSURE (mm.)
NW
FILTER DRIER
Wrapping by canvas cloth of 6oz size and further protection by 2 coats of FOSTER 30-36
SW
* THE DIMENSION IS TO BE NOT LESS THAN
FAHU
CONDENSING UNIT
RAWLPLUG 2" INTO CONCRETE FALL TO FLOOR GULLEY 25 ∅ uPVC
SUCTION LINE UNION LIQUID LINE
G.I Ductwork
225°
SIGHT GLASS
Threaded rod to be bolted to the purlin
2. DO NOT SCALE FROM THE DRAWINGS.
VALVE
3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS. 6. ALL SUBMISSIONS AND DRAWINGS ARE FOLLOWING M/S DDA AND M/S EMAAR REGULATIONS. KEYPLAN:
8mm. M.S. ROD ANTI VIBRATION RUBBER MOUND
25mm
FG FALSE CEILING
OIL TRAP
CONDENSATE DRAIN FROM COOLING COIL
DRAIN PIPE
G.I. Threaded Rod
Galvanised iron ducting
50 x 25 G.I. Channel
1 " thick x 48Kg/Cu Mt RUBBER insulation with aluminium barrier (internal)
Double nuts and washers
FCU
AIR HANDLING UNIT
DUCT INSULATION DETAIL
TYPICAL FCU HANGING DETAILS
HORIZONTAL DUCT HANGER DETAIL PIPING DETAIL - TYPICAL
DUCT INSULATION WITH ALUMINIUM FOIL FACE BARRIER
G.I. DUCTWORK COLLAR DIFFUSER NECK FASTENED TO COLLAR BY 4 mm RIVETS
CEILING TILE
DIFFUSER NECK
GRILLE NECK DUCT COLLAR GRILLE FRAME GRILLE FASTENED TO WOODEN FRAME BY SELF-THREAD SCREWS
CONCRETE WALL / BULKHEAD
Wrapping by canvas cloth of 6oz size and further protection by 2 coats of FOSTER 30-36
20 mm. THICK HARD WOOD Description
Rev
CEILING
SUPPLY
AND
RETURN
Checked
Authorized
Rev
Date
Authorized
DUCT SECTION
CEILING TILE
NON-FLAMMABLE ADHSIVE
Date
INSULATION
DIFFUSER MOUNTING DETAIL
COPPER PIPE Purpose of issue Client:
19mm THICK CLOSED CELL RUBBER INSULATION
WALL GRILLE MOUNTING DETAIL
(W + 150mm) x (D + 150mm)
MR. MOHAMED YASIN FARUQE WALL
OUTLET - RETURN
NOTE: ALL THERMAL INSULATION MATERIALS SHALL HAVE ZERO OZONE DEPLETION POTENTIAL. Project Title:
SPRING MOUNTED ANTI VIBRATION MOUNT
PRIVATE VILLA (B+G+1+R) DUBAI HILLS, DUBAI, UAE PLOT NO.: - 6316624
FAHU
REFRIGERANT PIPE INSULATION DETAIL 200 mm CONCRETE PAD
50mm THICK CORK SHEET
Consultant:
6mm. THREADED ROD 25 x 50 G.I. CHANNEL 6mm. NUT AND WASHER PLENUM BOX SECTION 3mm. RIVET IN 3 PLACES
TYPICAL FOUNDATION DETAIL FOR PACKAGED UNIT
6mm. DROPPED ROD FASTENED TO SLAB BY EXPANSION SHIELD NEOPRIN RUBBER WITH CORK ISOLATOR AT FOUR CORNERS OF CONDENSING UNIT
(W + 75mm) x (D + 75mm)
SCHEDULE OF DUCT GAUGES
CONDENSING UNIT 25mm THICK CORK SHEET (BY OTHERS) 200mm CONCRETE PAD (BY OTHERS)
DUCT LARGEST DIMENSION mm
THICKNESS U.S.Ga mm
UP TO 300mm
26
0.60
300 to 750
24
0.70
751 to 1350
22
0.85
1351 to 2100
20
1.00
2101 AND OVER
18
1.30
CONCRETE WALL / BULKHEAD
BALANCING DAMPER PIPE CLAMP
200W x 300H PLENUM BOX
FLEXIBLE DUCT
SOFFIT
Main Contractor:
DUCTWORK
SUPPLY / RETURN LINEAR LINEAR BAR GRILLE
Subconsultant/ Subcontractor:
ROUND SPIGOT
FLEXIBLE DUCT INSULATION DETAIL Drawing title:
GENERAL NOTES AND DETAILS HVAC SYSTEM
TYPICAL FOUNDATION DETAIL FOR CONDENSING UNIT Original Scale
Drawn
Checked SP/SJ
1:100
Authorised
Date: AUG-2022
Date:
AUG-2022
Project Number
460-22
Plot Size RK
SP/EL
Date:
AUG-2022
A1
Sheet #
Rev
M-00-003
00
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY.
315°
NE
225°
NW
N
2. DO NOT SCALE FROM THE DRAWINGS.
SW
45°
SE
3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
135°
6. ALL SUBMISSIONS AND DRAWINGS ARE FOLLOWING M/S DDA AND M/S EMAAR REGULATIONS. KEYPLAN:
FANS SCHEDULE FAN DATA UNITE NO.
LOCATION
MOTOR DATA
AIR FLOW RATE
POWER IN.
ST. PRESS.
(L/S)
(kW)
(PA)
ELECTRICAL DATA VOLTS
PHASE
Hz.
QTY.
FAF-01
ROOF
431
0.4
250
220
1
50
1
FAF-02
ROOF
285
0.2
250
220
1
50
1 Description
Rev
EXF-01
REFER DRAWING
25
0.02
250
220
1
50
16
EXF-02
BASEMENT FLOOR
320
0.2
250
220
1
50
1
Purpose of issue
Date
Checked
Authorized
Rev
Date
Authorized
Client:
MR. MOHAMED YASIN FARUQE
EXF-03
BASEMENT FLOOR
630
0.4
250
220
1
50
1 Project Title:
EXF-04
BASEMENT FLOOR
100
0.1
250
220
1
50
PRIVATE VILLA (B+G+1+R) DUBAI HILLS, DUBAI, UAE PLOT NO.: - 6316624
1 Consultant:
EXF-05
GROUND FLOOR
50
0.05
250
220
1
50
1 Main Contractor:
NOTE: * EXTERNAL STATIC PRESSURE TO BE VERIFIED BY CONTRACTOR UPON ACTUAL SELECTION OF SYSTEM COMPONENTS Subconsultant/ Subcontractor:
Drawing title:
EQUIPMENT SCHEDULE HVAC SYSTEM Original Scale
Drawn
Checked SP/SJ
1:100
Authorised
Date: AUG-2022
Date:
AUG-2022
Project Number
460-22
Plot Size RK
SP/EL
Date:
AUG-2022
A1
Sheet #
Rev
M-01-001
00
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY.
315°
NE
225°
NW
135°
N
2. DO NOT SCALE FROM THE DRAWINGS.
SW
45°
SE
3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS. 6. ALL SUBMISSIONS AND DRAWINGS ARE FOLLOWING M/S DDA AND M/S EMAAR REGULATIONS. KEYPLAN:
Description
Rev
Purpose of issue
Date
Checked
Authorized
Rev
Date
Authorized
Client:
MR. MOHAMED YASIN FARUQE
Project Title:
PRIVATE VILLA (B+G+1+R) DUBAI HILLS, DUBAI, UAE PLOT NO.: - 6316624 Consultant:
Main Contractor:
Subconsultant/ Subcontractor:
Drawing title:
THERMAL LOAD SUMMERY HVAC SYSTEM Original Scale
Drawn
Checked SP/SJ
1:100
Authorised
Date: AUG-2022
Date:
AUG-2022
Project Number
460-22
Plot Size RK
SP/EL
Date:
AUG-2022
A1
Sheet #
Rev
M-02-001
00
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY.
315°
NE
225°
NW
135°
N
2. DO NOT SCALE FROM THE DRAWINGS.
SW
45°
SE
3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS. 6. ALL SUBMISSIONS AND DRAWINGS ARE FOLLOWING M/S DDA AND M/S EMAAR REGULATIONS. KEYPLAN:
Description
Rev
Purpose of issue
Date
Checked
Authorized
Rev
Date
Authorized
Client:
MR. MOHAMED YASIN FARUQE
Project Title:
PRIVATE VILLA (B+G+1+R) DUBAI HILLS, DUBAI, UAE PLOT NO.: - 6316624 Consultant:
Main Contractor:
Subconsultant/ Subcontractor:
Drawing title:
GLAZED ELEMENT SCHEDULE HVAC SYSTEM Original Scale
Drawn
Checked SP/SJ
1:100
Authorised
Date: AUG-2022
Date:
AUG-2022
Project Number
460-22
Plot Size RK
SP/EL
Date:
AUG-2022
A1
Sheet #
Rev
M-03-001
00
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY.
315°
NE
NW
N
225°
135°
DETAIL OF EXTERNAL WALL
2. DO NOT SCALE FROM THE DRAWINGS.
SW
45°
SE
3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS. 6. ALL SUBMISSIONS AND DRAWINGS ARE FOLLOWING M/S DDA AND M/S EMAAR REGULATIONS. KEYPLAN:
DETAIL OF
DROP BEAMS
FALSE CEILING
DETAIL OF EXTERNAL COLUMN
0.25
Description
Date
Checked
Authorized
Rev
Date
Authorized
29.11
62.37
24.74
83.16
8.52
25.99
Rev
DETAIL OF INSULATED GROUND FLOOR
Purpose of issue Client:
MR. MOHAMED YASIN FARUQE
Project Title:
PRIVATE VILLA (B+G+1+R) DUBAI HILLS, DUBAI, UAE PLOT NO.: - 6316624
DETAIL OF NON INSULATED GROUND FLOOR
Consultant:
DETAIL OF PARTITION
Main Contractor:
Subconsultant/ Subcontractor:
DETAIL OF TYPICAL FLOOR
Drawing title:
U- VALUE CALCULATION HVAC SYSTEM Original Scale
Drawn
Checked SP/SJ
1:100
Authorised
Date: AUG-2022
Date:
AUG-2022
Project Number
460-22
Plot Size RK
SP/EL
Date:
AUG-2022
A1
Sheet #
Rev
M-04-001
00
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY.
315°
NE
225°
NW
135°
N
2. DO NOT SCALE FROM THE DRAWINGS.
SW
45°
SE
3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS. 6. ALL SUBMISSIONS AND DRAWINGS ARE FOLLOWING M/S DDA AND M/S EMAAR REGULATIONS. KEYPLAN:
Description
Rev
Purpose of issue
Date
Checked
Authorized
Rev
Date
Authorized
Client:
MR. MOHAMED YASIN FARUQE
Project Title:
PRIVATE VILLA (B+G+1+R) DUBAI HILLS, DUBAI, UAE PLOT NO.: - 6316624 Consultant:
Main Contractor:
Subconsultant/ Subcontractor:
Drawing title:
VENTILATION CALCULATION HVAC SYSTEM Original Scale
Drawn
Checked SP/SJ
1:100
Authorised
Date: AUG-2022
Date:
AUG-2022
Project Number
460-22
Plot Size RK
SP/EL
Date:
AUG-2022
A1
Sheet #
Rev
M-05-001
00
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY.
315°
NE
N
NW
135°
P
3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS. 6. ALL SUBMISSIONS AND DRAWINGS ARE FOLLOWING M/S DDA AND M/S EMAAR REGULATIONS.
I MI T
KEYPLAN:
P
L OT
225°
L OT L
MI
T
L I
2. DO NOT SCALE FROM THE DRAWINGS.
SW
45°
SE
01
02 03
04
05
06 07 09
10 11
12
13
PUMPROOM & EA=100 L/S BALANCE TANK
Maneuvering Parking
A1
A NRD
B
EA=25 L/S
EF-01-25 L/S
TOILETEAD
TV
A2
EF-02-320 L/S
EAD
C
EXHAUST AIR LOUVER EA- 320 L/S
EA=25 L/S
DRIVER'S
EAD
-3.20 EF-03-630 L/S
NRD EF-01-25 L/S
EAD
BELL MOUTH END EXHAUST AIR LOUVER EA- 630 L/S
SHOW GARAGE 192 m2 EAD
-3.15
-3.18
A3
-3.15
MAID'S 19 m2
NRD EA=50 L/S
ENTRANCE
EAD T/A
A SHISH E LOUNG 20 m2
SAD
EAD EAD
D
Description
Rev
Date
Checked
Authorized
Rev
Date
Authorized
EAD
N SUNKE EN D R A G
NRD
A4
EAD
EA=25 L/S
EF-01-25 L/S
A5 0 EF-04-10
E
EA=50
BELL MOUTH END
F
L/S
NRD
L/S
EAD
-3.20
KIT
SAD
SAD
SERVICE ENTRANCE
-3.20 EF-01-25
G
L/S
EA=25
Purpose of issue
EAD
SAD
L/S
FA=125
L/S
Client:
FAD NRD
-3.15
FA=61
EAD
H
L/S
A6
FAD
-3.15
RAD
EAD
FAD SAD
MR. MOHAMED YASIN FARUQE
SAD EAD
ELEC. 6 m2 EAD
EA=100 L/S
TH END
U BELL MO
FAD F/A EAD T/A
SAD
SAD
SAD
SAD
SAD
K
Project Title:
PRIVATE VILLA (B+G+1+R) DUBAI HILLS, DUBAI, UAE PLOT NO.: - 6316624
A CINEM 2 25.0 m 0 INDY50
WIDE
EAD
-3.15 E 00 WID INDY5
WATER TANK 12 m2
G GAMIN M ROO OPEN 26 m2
WIDE
LAUNDRY EA=20 L/S 12 m2
SAD
0 INDY50
SERVICE ENTRANCE
J
MECHANICAL 12 m2 EAD
A7
N
SCREE
EAD
PUMP ROOMEA=100 & L/S BALANCETANK 13 m2
Consultant:
L
NOTE; 1.AC UNIT SHALL BE COMPATIBLE WITH HOME AUTOMATION SYSTEM Main Contractor:
MI
T
L I
MI
L I
L OT
2.TYPE AND DISTRIBUTION OF AIR OUTLETS SHALL BE AS PER FINAL INTERIOR DESIGN DWG/ FINAL RCP DWG AND AS PER ARCHITECTURE ENGINEER APPROVAL.
08
P
T
Subconsultant/ Subcontractor:
Drawing title:
BASEMENT FLOOR PLAN HVAC SYSTEM Original Scale
Drawn
Checked SP/SJ
1:100
Authorised
Date: AUG-2022
Date:
AUG-2022
Project Number
460-22
BASEMENT FLOOR PLAN
Plot Size RK
SP/EL
Date:
AUG-2022
A1
Sheet #
Rev
M-06-001
00
P
L OT
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY.
315°
P
NE
N
L OT P
NW
I MI T
135°
02 03 SUNKEN 04
05
LOUNGE
06 07 09
10 11
12
225°
L
01
2. DO NOT SCALE FROM THE DRAWINGS.
SW
L OT
PARKW A ENTRA Y NCE
T
MI L I
45°
SE
3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS. 6. ALL SUBMISSIONS AND DRAWINGS ARE FOLLOWING M/S DDA AND M/S EMAAR REGULATIONS.
13
KEYPLAN:
JACUZZI
FIRE PLACE
FIRE PIT +0.45
SWIMMING POOL
+0.45
-1.35
+0.40
-0.20
+0.20
+0.35
+0.35
-0.20
OUTDOOR LIVING 57.0 m2
A
A1
COUNTER
B
+0.40
-3.20
-0.20
BBQ
A2
C +0.35
OPEN TO SKY
OPEN TO ABOVE
SHOW KITCHEN 30.0 m2
SAD
55.0 LIVING SAD
m2
A3
SAD L/S FA=59
FA=55 L/S
SAD
SAD
EAD F/B
TV
SAD
D
RAD
FAD NRD
FA=84 L/S
FAD
BANQUETING AREA 6.20m2
TOILET 4.30 m2 FA=41 L/S +0.40
DINING 37.0 m2
FAD
EAD
EF-01-25 L/S
SAD
SAD
A4
A5
FAD F/A
Description
Rev
SAD
FAD
E
n Sunke n e d Gar
EAD T/A
EF-01-25
SAD
L/S NRD
SAD
F
L/S EA=25
SUITE GUEST 2 26.0 m SAD
RAD
Date
Checked
Authorized
Rev
Date
Authorized
SAD
SAD
OPEN TO SKY EAD
CHEF'S KITCHEN NRD 14.40 m2
FAD
SAD
EAD
REFLECTIVE POOL
FA=25
L/S
FAD
NRD
EAD
EF-05-50 L/S
G
EA=50 L/S
SAD
FAD
EAD
H
FA=25
RAD
SAD
+0.45 EF-01-25 L/S
EAD
FA=25
PANTRY EF-01-25 L/S
EF-01-25
SAD
TOILET 8.50 m2
A6
L/S
RAD
Purpose of issue
FAD T/B EAD F/B
SAD
Client: +0.35
SUITE GUEST 2 28.0 m
EAD T/A
+0.40 SIDE ENTRANCE
FAD F/A
REFLECTIVE POOL
L/S
SAD
NRD
SIDE ENTRANCE
L/S
FOYER 14.0 m2
EA=25 L/S
K
L/S
NRD
EAD NRD
EF-01-25
RAD
FAD
+0.45
EA=25 L/S
L/S
FAD
EAD EAD
EA=25
FAD
FA=55 L/S
FAD
J
-3.20
SAD
SAD
SUITE GUEST 2 30.0 m
MR. MOHAMED YASIN FARUQE
SAD
SAD
A7 SAD
MAIN ENTRANCE
+0.40
SAD
Project Title: SAD
PRIVATE VILLA (B+G+1+R) DUBAI HILLS, DUBAI, UAE PLOT NO.: - 6316624
-0.20
L
+0.35
Consultant: +0.35 GARBA GE ELECT. RM RM. +7.66 UTILITY FFL ROOM+7.66 FFL
MI
08
L OT
0.00
0.00 +0.05
T
P 0.00
L OT
GATE LEVEL
MI
LPG M ETER
L I
L I
+0.35 -0.05
P
T
Main Contractor: 0.00
NOTE; 1.AC UNIT SHALL BE COMPATIBLE WITH HOME AUTOMATION SYSTEM DRIVEWAY
2.TYPE AND DISTRIBUTION OF AIR OUTLETS SHALL BE AS PER FINAL INTERIOR DESIGN DWG/ FINAL RCP DWG AND AS PER ARCHITECTURE ENGINEER APPROVAL.
Subconsultant/ Subcontractor:
Drawing title:
GROUND FLOOR PLAN HVAC SYSTEM
ROAD
Original Scale
GROUND FLOOR PLAN
Drawn
Checked SP/SJ
1:100
Authorised
Date: AUG-2022
Date:
AUG-2022
Project Number
460-22
Plot Size RK
SP/EL
Date:
AUG-2022
A1
Sheet #
Rev
M-06-002
00
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY.
315°
NE
N
NW
135°
02 03
04
05
06 07 09
10 11
12
225°
01
2. DO NOT SCALE FROM THE DRAWINGS.
SW
45°
SE
3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS. 6. ALL SUBMISSIONS AND DRAWINGS ARE FOLLOWING M/S DDA AND M/S EMAAR REGULATIONS.
13
KEYPLAN:
edge of canopy
edge of canopy
A1
Semi-Covered Balcony 11 m2 +4.80
A B
limit of pergola TERRACE 30 m2
A2
SAD
C
FAMILY ROOM 24.0 m2
SAD
Master 42.0 m2
OPEN TO SKY OPEN TO SKY
open to sky SAD
open to below
FA=25 L/S
SAD
A3
FAD SAD
D
SAD SAD
5 +L/4 S .8
SAD
D
SA SUITE GUEST 2 27.0 m
SAD
FA=11
A4
SAD
RAD
SAD
FAD
S
L/ EF-01-25
FA=25 L/S EF-01-25 L/S
FAD
SAD
FAD F/A
E
NRD
EAD
F
A5
FAD
EA=25 L/S
EAD T/A
EAD
RAD
open to below
EAD
FA=25
EA=25
L/S
Description
Rev
L/S
Date
Checked
Authorized
Rev
Date
Authorized
FAD
NRD
OPEN TO SKY EF-01-25 L/S
REFLECTIVE POOL
FA=25 L/S
G
EAD
EA=25 L/S
FAD
RAD SAD
SAD
SAD
FA=25
SAD
EAD
+4.85 SAD
open to sky
SAD
A6
SAD
SAD
J
SUITE GUEST 2 m .0 8 2
FAD
SAD
RAD
H
K
NRD
EAD
SAD
Master 42.0 m2
FAD
open to below
SIDE ENTRANCE
EAD
EAD T/A
FAD F/A
L/S L/S
FAD
EA=25
NRD
L/S EF-01-25 L/S EA=25
FAD NRD L/S EF-01-25
Purpose of issue
FA=25
L/S
Client: SAD
RAD
MR. MOHAMED YASIN FARUQE Master 2 42.0 m
REFLECTIVE POOL
A7
MAIN ENTRANCE
OPEN TO SKY BALCONY 5 m2
Project Title:
edge of canopy
2 ny 5 m d Balco
PRIVATE VILLA (B+G+1+R) DUBAI HILLS, DUBAI, UAE PLOT NO.: - 6316624
Covere
L edge of canopy
Consultant:
08
Main Contractor:
NOTE; 1.AC UNIT SHALL BE COMPATIBLE WITH HOME AUTOMATION SYSTEM 2.TYPE AND DISTRIBUTION OF AIR OUTLETS SHALL BE AS PER FINAL INTERIOR DESIGN DWG/ FINAL RCP DWG AND AS PER ARCHITECTURE ENGINEER APPROVAL.
Subconsultant/ Subcontractor:
Drawing title:
FIRST FLOOR PLAN HVAC SYSTEM
FIRST FLOOR PLAN
Original Scale
1:100
Drawn
Checked SP/SJ
Authorised
Date: AUG-2022
Date:
AUG-2022
Project Number
460-22
Plot Size RK
SP/EL
Date:
AUG-2022
A1
Sheet #
Rev
M-06-003
00
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY.
315°
NE
N
NW
135°
02 03
04
05
06 07 09
10 11
12
225°
01
2. DO NOT SCALE FROM THE DRAWINGS.
SW
45°
SE
3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS. 6. ALL SUBMISSIONS AND DRAWINGS ARE FOLLOWING M/S DDA AND M/S EMAAR REGULATIONS.
13
KEYPLAN:
A1
CANOPY
A B
A2 FIRE PIT
C
+8.60
OPEN TO SKY OPEN TO SKY
ROOF LOUNGE 42m2 +9.20
A3 Jacuzzi 6 m2
+8.90 EF-01-25 L/S
D
EA=25
A4
L/S
FAF-02-285 L/S FAD T/B
E
A5 2
00m
BBQ 2
FAD
Description
Rev
Date
Checked
Authorized
Rev
Date
Authorized
EAD F/B
+8.65
F
5.13
OPEN TO SKY SERVICE AREA
REFLECTIVE POOL
EAD
+8.60
G
A6 +8.60
H
EXHAUST AIR LOUVER EA- 200 L/S
FAD T/B
EAD F/B
J
Purpose of issue Client:
31 L/S
FAF-01-4
FAD
K
A E ARE SERVIC +8.60
EAD
SIDE ENTRANCE
REFLECTIVE POOL
5.10
MAIN ENTRANCE
MR. MOHAMED YASIN FARUQE A7
Project Title:
PRIVATE VILLA (B+G+1+R) DUBAI HILLS, DUBAI, UAE PLOT NO.: - 6316624
EXHAUST AIR LOUVER EA- 275 L/S
+9.45
L ENTRY FRAME
+8.25
Consultant:
CANOPY
08
ROOF FLOOR PLAN
Main Contractor:
NOTE; 1.AC UNIT SHALL BE COMPATIBLE WITH HOME AUTOMATION SYSTEM 2.TYPE AND DISTRIBUTION OF AIR OUTLETS SHALL BE AS PER FINAL INTERIOR DESIGN DWG/ FINAL RCP DWG AND AS PER ARCHITECTURE ENGINEER APPROVAL.
Subconsultant/ Subcontractor:
Drawing title:
ROOF FLOOR PLAN HVAC SYSTEM Original Scale
Drawn
Checked SP/SJ
1:100
Authorised
Date: AUG-2022
Date:
AUG-2022
Project Number
460-22
Plot Size RK
SP/EL
Date:
AUG-2022
A1
Sheet #
Rev
M-06-004
00
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY.
315°
NE
4
NW
N
225°
5
3
2. DO NOT SCALE FROM THE DRAWINGS.
SW
45°
SE
3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
135°
2 6. ALL SUBMISSIONS AND DRAWINGS ARE FOLLOWING M/S DDA AND M/S EMAAR REGULATIONS.
1
KEYPLAN:
1. R.C/SOLID BLOCK SUPPORT WITH PLASTER & EPOXY 2. RUBBER PAD TO APPROVAL 3. ROOF WATER SUPPLY PIPE TO SPEC. 4. PIPE INSULATION AND FINISHES TO SPEC. 5. FIXING CLAMP TO APPROVAL
BEDDING + BACKFILL DETAIL IN ACCORDANCE WITH BS-8301 FOR EXTERNAL PIPES
TYPICAL PIPE FIXING DETAILS
BOOSTER PUMPS CONNECTION DETAIL
20Ø CWS RING
Description
Rev
20Ø CWS/HWS RING
Date
Checked
Authorized
Rev
Date
Authorized
ISOLATING VALVE
Purpose of issue 15ØCWS PEX PIPES
Client:
MR. MOHAMED YASIN FARUQE
Project Title:
PRIVATE VILLA (B+G+1+R) DUBAI HILLS, DUBAI, UAE PLOT NO.: - 6316624
TYPICAL TOILET WATER SERVICES ISOMETRIC DIAGRAM
Consultant:
20ØCWS/HWS PEX PIPES
FLOAT VALVE
CWS/HWS RING (SIZE: AS PER WATER SERVICES LAYOUTS)
CWS (SIZE: AS PER WATER SERVICES LAYOUTS)
ISOLATING VALVE
20ØCWS/HWS PEX PIPES
Main Contractor: SHOWER TRAY LAV.
BATHTUB
WATER TANK 15ØCWS PEX PIPES
15ØCWS/HWS PEX PIPES
Subconsultant/ Subcontractor:
BIDET
15ØANGLE VALVE
WC 15ØANGLE VALVE
TYPICAL BATHROOM WATER SERVICES ISOMETRIC DIAGRAM
Drawing title:
STANDARD DETAILS-1 WATER SUPPLY SYSTEM Original Scale
Drawn
Checked SP/SJ
1:100
Authorised
Date: AUG-2022
Date:
AUG-2022
Project Number
460-22
Plot Size RK
SP/EL
Date:
AUG-2022
A1
Sheet #
Rev
P-00-001
00
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY.
315°
SE
NE
45°
0
10
SW
0
20 00
200
NW
N
1
135°
3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
270
6. ALL SUBMISSIONS AND DRAWINGS ARE FOLLOWING M/S DDA AND M/S EMAAR REGULATIONS.
130
KEYPLAN:
200
850
200
500
600
225°
400
2. DO NOT SCALE FROM THE DRAWINGS.
Description
Rev
Purpose of issue
Date
Checked
Authorized
Rev
Date
Authorized
Client:
MR. MOHAMED YASIN FARUQE
Project Title:
PRIVATE VILLA (B+G+1+R) DUBAI HILLS, DUBAI, UAE PLOT NO.: - 6316624 Consultant:
CONCREETE SLAB
20Ø CWS
20Ø HWS
Main Contractor:
WITH 20Ø CONDIUTE FALSE CEILING 15Ø CWS(PEX) WITH20Ø CONDIUTE
15Ø HWS(PEX) WITH 20Ø CONDIUTE
Subconsultant/ Subcontractor:
ANGLE VALVE
W/B MIXER 20Ø (PEX)
F.F.L
Drawing title:
STANDARD DETAILS-2 WATER SUPPLY SYSTEM
FLOOR SLAB
Original Scale
Drawn
Checked SP/SJ
1:100
Authorised
Date: AUG-2022
Date:
AUG-2022
Project Number
460-22
Plot Size RK
SP/EL
Date:
AUG-2022
A1
Sheet #
Rev
P-00-002
00
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY.
315°
2. DO NOT SCALE FROM THE DRAWINGS.
NE
225°
SW
N
NW
45°
SE
4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS.
135°
6. ALL SUBMISSIONS AND DRAWINGS ARE FOLLOWING M/S DDA AND M/S EMAAR REGULATIONS.
L OT
P
L
T
MI L I
3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER.
P
L OT
I MI T
KEYPLAN:
01
02 03
04
05
06 07 09
10 11
12
13
WHA
GV
BIB TAP
PUMPROOM & PROVISION CWS BALANCE TANK FOR SWIMMING
Maneuvering Parking CWS
POOL & JACUZZY
A1
A GV
B GV
TV
TOILET
A2
DRIVER'S -3.20
C
WHA
BIB TAP GV
CWS
SHOW GARAGE 192 m2
CWS
D
CWS
-3.15
-3.18
MAID'S 19 m2
ENTRANCE
A3
-3.15
A SHISH E G N U LO 20 m2
WHA
N SUNKE EN GARD
Description
Rev
Date
Checked
Authorized
Rev
Date
Authorized
A4
HWR HWS CWS
A5
GV GV
E
GV
/A CWS FF/A HWS /A HWR T
KIT
F
CWS HWS HWR
CWS HWS HWR
-3.20
Purpose of issue Client:
-3.20
SERVICE ENTRANCE
WHA
G
CWS HWS HWR
CWS
-3.15
MR. MOHAMED YASIN FARUQE
A6
-3.15
H
GV
HWS F/A HWR T/A
LAUNDRY 12CWS m2FILLING LINE T/A
K
CWS HWS HWR
LEGEND
G GAMIN M O O R N OPE 2 m 26
A7 GV
GATE VALVE
IV
ISOLATING VALVE
WHA
WATER HAMMER ARRESTOR
NRV
NON RETURN VALVE
E 00 WID INDY5
CWS
N
SCREE
PUMP ROOM & BALANCETANK 13 m2 CWS
CWS
L CWS
FILLING LINE (FOR CONTINUATION REFER GROUND FLOOR PLAN)
EWH TRANSFER PUMP SET CONSISTING 1DUTY 1STD. BY TO PROVIDE 1.5 L/S@ 20 mtrs. HEAD. ACTUAL HEAD TO BE CALCULATED & SUBMITTED FOR APPROVAL.
FOR CONTINUATION REFER GROUND FLOOR PLAN
Consultant:
ELECTRIC WATER HEATER (GLASS LINED, HORIZONTAL TYPE)
CWS
COLD WATER SUPPLY
BCWS
BOOSTER COLD WATER SUPPLY
WTPL
WATER TRANSFER PUMP LINE
WMC
WATER METER CABINET
IV
ISOLATING VALVE
PRV
PRESSURE REDUCING VALVE
RV
REGULATING VALVE
BP
BOOSTER PUMP
UG
UNDER GROUND
F/A
FROM ABOVE
F/B
FROM BELOW
T/A
TO ABOVE
T/B
TO BELOW
TP
TRANSFER PUMP
Main Contractor:
P
08
L I
MI
T
L I
MI
L OT
T
PRIVATE VILLA (B+G+1+R) DUBAI HILLS, DUBAI, UAE PLOT NO.: - 6316624
SPRAY TAP WITH FLEX HOSE
-3.15
WATER TANK 12 m2
Project Title:
TAPINGS (BD, W.BASIN, BATH-
A CINEM 2 25.0 m
CWS
E 00 WID INDY5
J
MECHANICAL 12 m2
CWS
SERVICE CWS F/A ENTRANCE
E 00 WID INDY5
ELEC. 6 m2
Subconsultant/ Subcontractor:
Drawing title:
BASEMENT FLOOR PLAN WATER SUPPLY SYSTEM Original Scale
Checked SP/SJ
- HOT WATER SUPPLY PIPE (HWS)
1:100
- COLED WATER SUPPLY PIPE (CWS)
Project Number
- HOT WATER RETURN PIPE (HWR)
Drawn
Authorised
Date: AUG-2022
Date:
AUG-2022
460-22
Plot Size RK
SP/EL
Date:
AUG-2022
A1
Sheet #
Rev
P-01-001
00
P
L OT
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY.
315°
SE
NE
P
P
L OT
SW
I MI T
225°
L
45°
L OT
PARKW A ENTRA Y NCE
T
MI L I
2. DO NOT SCALE FROM THE DRAWINGS.
N
NW
135°
01
02 03 SUNKEN 04
05
LOUNGE
06 07 09 JACUZZI
10 11
FIRE PLACE
FIRE PIT +0.45
12
13
3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS. 6. ALL SUBMISSIONS AND DRAWINGS ARE FOLLOWING M/S DDA AND M/S EMAAR REGULATIONS.
SWIMMING POOL
+0.45
KEYPLAN:
-1.35
+0.40
-0.20
+0.20
+0.35
+0.35
-0.20
OUTDOOR LIVING 57.0 m2
A
A1
COUNTER
B
+0.40
-3.20
-0.20
BBQ
A2 WHA
C
HWR HWS CWS
+0.35
OPEN TO SKY
OPEN TO ABOVE
SHOW KITCHEN 30.0 m2
DAILY WATER CONSUMPTION FOR VILLA AS PER DEWA GUIDELINES LIVING
HWR HWS CWS
2 55.0 m
A3
Daily consumption (Imp.G/Bed.Room)
GV
TV
D
n Sunke n e d Gar
DINING 37.0 m2 TOILET HWR 4.30HWS m2 CWS
+0.40 GV
CWS F/A HWS F/A HWR T/A
E
HWR HWS CWS
BANQUETING AREA 6.20m2
HWR HWS CWS
Swimming Pool Demand (Imp.G)
SUITE GUEST 2 6.0 m S T/B 2
HWR HWS CWS
HWR HWS CWS
CHEF'S KITCHEN 14.40 m2
G
REFLECTIVE POOL
Total daily Demand -3.20
CWS HWS HWR
GV
H
500 Description
Date
Checked
Authorized
Rev
Date
Authorized
= ( 09 x 125 ) + 500 = 1625 Imp.G.
CWS HWS HWR
= 7387 Liter
GV
GV
CWS
A6
CWS HWS HWR
CWS FILLING LINE F/B
9
Rev
CW /B HWS T /B HWR F
OPEN TO SKY
CWS FILLING LINE T/A
Number of Bed Rooms
A5
CWS
F
A4
125
CWS
+0.45
GV
CWS
J
CWS HWS HWR
+0.45 GV
PANTRY
K
WHA
Purpose of issue
CWS HWS HWR
CWS T/B HWSTOILET T/B HWR8.50 F/B m2
GV
+0.35
FOYER 14.0 m2 /A CWS F /A HWS F /A HWR T
+0.40 SIDE ENTRANCE
CWS T/B
SIDE ENTRANCE
REFLECTIVE POOL
MAIN ENTRANCE
Client:
SUITE GUEST 2 28.0 m
MR. MOHAMED YASIN FARUQE
SUITE GUEST 2 30.0 m
A7
+0.40
U/G CWS
LEGEND L Filling L
FOR CONTINUATION REFER BASEMENT FLOOR PLAN
U/G CWS
ine FA/T
-0.20
FOR CONTINUATION REFER BASEMENT FLOOR PLAN
B
+0.35
UT K LAYO ETWOR N L A FIN T CIALIS BY SPE
Project Title:
PRIVATE VILLA (B+G+1+R) DUBAI HILLS, DUBAI, UAE PLOT NO.: - 6316624
TAPINGS (BD, W.BASIN, BATHSPRAY TAP WITH FLEX HOSE
U/G CWS GV
CWS T/A
BIB TA
P
GARBA GE ELECT. RM RM. +7.66 UTILITY FFL ROOM+7.66
eter cap
FFL
+0.35
TFB/TA
MI
+0.05
T
L OT
FROM D EWA
GATE VALVE
IV
ISOLATING VALVE
WHA
WATER HAMMER ARRESTOR
NRV
NON RETURN VALVE
0.00
0.00
P
L I
TANK WATER 1x1M SIZE
GV
L OT
-0.05
N IGATIO IRR08
LPG M
0.00
ETER
GATE LEVEL
MI
ling Line
U/G CWS
ET UMP S . BY TION P D IRRIGA ING 1DUTY 1ST T CONSIS IDE 1 L/S V O R P TO
P
DEWA F il
inet
S
U/G CW
L I
water m
+0.35
EWH
ELECTRIC WATER HEATER (GLASS LINED, HORIZONTAL TYPE)
CWS
COLD WATER SUPPLY
BCWS
BOOSTER COLD WATER SUPPLY
WTPL
WATER TRANSFER PUMP LINE
WMC
WATER METER CABINET
IV
ISOLATING VALVE
PRV
PRESSURE REDUCING VALVE
RV
REGULATING VALVE
BP
BOOSTER PUMP
UG
UNDER GROUND
F/A
FROM ABOVE
F/B
FROM BELOW
T/A
TO ABOVE
T/B
TO BELOW
TP
TRANSFER PUMP
0.00
DRIVEWAY
Consultant:
Main Contractor:
Subconsultant/ Subcontractor:
ROAD
GROUND FLOOR PLAN
Drawing title:
GROUND FLOOR PLAN WATER SUPPLY SYSTEM Original Scale
Checked SP/SJ
- HOT WATER SUPPLY PIPE (HWS)
1:100
- COLED WATER SUPPLY PIPE (CWS)
Project Number
- HOT WATER RETURN PIPE (HWR)
Drawn
Authorised
Date: AUG-2022
Date:
AUG-2022
460-22
Plot Size RK
SP/EL
Date:
AUG-2022
A1
Sheet #
Rev
P-01-002
00
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY.
315°
2. DO NOT SCALE FROM THE DRAWINGS.
NE
225°
SW
N
NW
45°
SE
135°
01
02 03
04
05
06 07 09
10 11
12
13
3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS. 6. ALL SUBMISSIONS AND DRAWINGS ARE FOLLOWING M/S DDA AND M/S EMAAR REGULATIONS. KEYPLAN:
edge of canopy
edge of canopy
A1
Semi-Covered Balcony 11 m2 +4.80
A B
limit of pergola TERRACE 30 m2
A2 FAMILY ROOM 24.0 m2
C Master 42.0 m2
OPEN TO SKY OPEN TO SKY
open to sky
open to below
A3
WHA
SUITE GUEST 2 m .0 7 2
+4.85
D
A4
WHA
CWS HWS HWR
CWS F/A T/B HWS F/A T/B HWR F/B T/A
E F
A5
HWR HWS CWS
HWR HWS CWS
GV
open to below
GV
CWS FILLING LINE T/A
OPEN TO SKY CWS HWS HWR
Description
Rev
Checked
Authorized
Rev
Date
Authorized
SUITE GUEST 2 28.0 m
REFLECTIVE POOL
G
A6
H
WHA
HWR HWS CWS
+4.85
CWS HWS HWR GV
Purpose of issue
J
K
Date
open to sky
Master 42.0 m2
open to below
SIDE ENTRANCE REFLECTIVE POOL
Client:
GV
/A T/B CWS F /A T/B F S W H /B T/A HWR F
MR. MOHAMED YASIN FARUQE
WHA
Master 2 42.0 m
A7
MAIN ENTRANCE
OPEN TO SKY BALCONY 5 m2 edge of canopy
5 alcony
dB Covere
LEGEND
m2
L
Project Title:
PRIVATE VILLA (B+G+1+R) DUBAI HILLS, DUBAI, UAE PLOT NO.: - 6316624
TAPINGS (BD, W.BASIN, BATHSPRAY TAP WITH FLEX HOSE edge of canopy
GV
GATE VALVE
IV
ISOLATING VALVE
WHA
WATER HAMMER ARRESTOR
NRV
NON RETURN VALVE
08
EWH
Consultant:
ELECTRIC WATER HEATER (GLASS LINED, HORIZONTAL TYPE)
CWS
COLD WATER SUPPLY
BCWS
BOOSTER COLD WATER SUPPLY
WTPL
WATER TRANSFER PUMP LINE
WMC
WATER METER CABINET
IV
ISOLATING VALVE
PRV
PRESSURE REDUCING VALVE
RV
REGULATING VALVE
BP
BOOSTER PUMP
UG
UNDER GROUND
F/A
FROM ABOVE
F/B
FROM BELOW
T/A
TO ABOVE
T/B
TO BELOW
TP
TRANSFER PUMP
Main Contractor:
Subconsultant/ Subcontractor:
FIRST FLOOR PLAN
Drawing title:
FIRST FLOOR PLAN WATER SUPPLY SYSTEM Original Scale
Checked SP/SJ
- HOT WATER SUPPLY PIPE (HWS)
1:100
- COLED WATER SUPPLY PIPE (CWS)
Project Number
- HOT WATER RETURN PIPE (HWR)
Drawn
Authorised
Date: AUG-2022
Date:
AUG-2022
460-22
Plot Size RK
SP/EL
Date:
AUG-2022
A1
Sheet #
Rev
P-01-003
00
NOTES :1. THIS DRAWING IS THE COPYRIGHT OF YA YAGHMOUR ARCHITECTS, MUST NOT BE RETAINED, COPIED OR USED WITHOUT THE ABOVE CONSULTANT'S AUTHORITY.
315°
2. DO NOT SCALE FROM THE DRAWINGS.
NE
225°
SW
N
NW
45°
SE
135°
01
02 03
04
05
06 07 09
10 11
12
13
3. ALL DIMENSIONS ARE IN METER & LEVELS IN METER, UNLESS NOTED OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE CONSULTANT ENGINEER. 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH THE OTHER RELEVANT ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE SPECIFICATIONS. 5. ALL SERVICES CUT-OUTS, EQUIPMENT & EQUIPMENT PLINTH ARE SHOWN INDICATIVE ONLY: CONTRACTOR TO COORDINATE THESE WITH THE SERVICES & STRUCTURAL DRAWINGS. 6. ALL SUBMISSIONS AND DRAWINGS ARE FOLLOWING M/S DDA AND M/S EMAAR REGULATIONS. KEYPLAN:
A1
CANOPY
A B
A2 FIRE PIT
C
+8.60
OPEN TO SKY OPEN TO SKY
ROOF LOUNGE 42m2 +9.20
A3 Jacuzzi 6 m2 CWS
+8.90 CWS HWS HWR
PROVISION FOR JACUZZI
D
A4
WHA
CWS
A5
GRP PANEL SECTIONAL INSULATED DOMESTIC WATER TANK CAPACITY=3 m3
E
00m
BBQ 2
GV
COOLING WATER CIRCULATING PUMP SET
2
Description
Rev
Date
Checked
Authorized
Rev
Date
Authorized
+8.65
F
HWR F/B HWS T/B CWS T/B
IV
IV
HEAT PUMP FOR DOMESTIC COOLING WATER
IV
SERVICE AREA
REFLECTIVE POOL
TO UP +8.60 BYPASS
G H
OPEN TO SKY
IV
IV
HWR HWS CWS
COVERED BOOSTER PUMP SET CONSISTING OF 2 PUMPS (1DUTY & 1STD BY) TO PROVIDE 3 L/S@ 20mtrs. HEAD. ACTUAL HEAD TO CALCULATED BY CONTRACTOR & SUBMITTED FOR APPROVAL.
700
J
A6 +8.60 /A HWR F /A HWS T /A CWS T
L HWR HWS CWS
Purpose of issue
/B HWR F /B HWS T /B T CWS
K
Client:
A E ARE SERVIC +8.60 SIDE ENTRANCE SOLAR SYSTEM WITH 700 L BUFFER TANK & CIRCULATION PUMP.
REFLECTIVE POOL
MR. MOHAMED YASIN FARUQE A7
MAIN ENTRANCE
HWR HWS CWS
LEGEND +9.45
L
Project Title:
PRIVATE VILLA (B+G+1+R) DUBAI HILLS, DUBAI, UAE PLOT NO.: - 6316624
TAPINGS (BD, W.BASIN, BATHSPRAY TAP WITH FLEX HOSE
ENTRY FRAME
+8.25
GV
GATE VALVE
IV
ISOLATING VALVE
WHA
WATER HAMMER ARRESTOR
NRV
NON RETURN VALVE
CANOPY
08
EWH
ROOF FLOOR PLAN
Consultant:
ELECTRIC WATER HEATER (GLASS LINED, HORIZONTAL TYPE)
CWS
COLD WATER SUPPLY
BCWS
BOOSTER COLD WATER SUPPLY
WTPL
WATER TRANSFER PUMP LINE
WMC
WATER METER CABINET
IV
ISOLATING VALVE
PRV
PRESSURE REDUCING VALVE
RV
REGULATING VALVE
BP
BOOSTER PUMP
UG
UNDER GROUND
F/A
FROM ABOVE
F/B
FROM BELOW
T/A
TO ABOVE
T/B
TO BELOW
TP
TRANSFER PUMP
Main Contractor:
Subconsultant/ Subcontractor:
Drawing title:
ROOF FLOOR PLAN WATER SUPPLY SYSTEM Original Scale
Checked SP/SJ
- HOT WATER SUPPLY PIPE (HWS)
1:100
- COLED WATER SUPPLY PIPE (CWS)
Project Number
- HOT WATER RETURN PIPE (HWR)
Drawn
Authorised
Date: AUG-2022
Date:
AUG-2022
460-22
Plot Size RK
SP/EL
Date:
AUG-2022
A1
Sheet #
Rev
P-01-004
00
FOR TENDERING
GENERAL NOTES:
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations. REVISION: 05 04 03 02 01 NO. DESCRIPTION
DATE
MR. MOHAMED FARUQE OWNER
VILLA 123 PROJECT
DUBAI LOCATION
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
DRAWING TITLE
LIST OF DRAWINGS JULY 2023
ISSUE DATE
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
DESIGNED BY:
Arch. DINA HADDADIN
PROJECT No
SHEET No
A002
FOR TENDERING
GENERAL NOTES:
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations. REVISION: 05 04 03 02 01 NO. DESCRIPTION
DATE
MR. MOHAMED FARUQE OWNER
VILLA 123 PROJECT
DUBAI LOCATION
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
DRAWING TITLE
LIST OF DRAWINGS JULY 2023
ISSUE DATE
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
DESIGNED BY:
Arch. DINA HADDADIN
PROJECT No
SHEET No
A002
FOR TENDERING
GENERAL NOTES:
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations. REVISION: 05 04 03 02 01 NO. DESCRIPTION
DATE
MR. MOHAMED FARUQE OWNER
VILLA 123 PROJECT
DUBAI LOCATION
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
DRAWING TITLE
GENERAL NOTES JULY 2023
ISSUE DATE
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
DESIGNED BY:
Arch. DINA HADDADIN
PROJECT No
SHEET No
A003
FOR TENDERING DIMENSION LAYOUT LEGEND SYMBOL
DESCRIPTION CLEAR DIMENSION
F.F.L. -3.25 PUMPROOM & BALANCE TANK
F.F.L. -3.30
F.F.L. -3.25
DRIVER'S BATHROOM
TV
F.F.L. -3.30
F.F.L. -3.25 DRIVER'S ROOM F.F.L. -3.25 GARDEN BATHROOM
RECTANGULAR COLUMN WAS CREATED (W68CM*L117CM)WITH THE ADDITION OF SUBFRAME TO COVER CIRCULAR COLUMNS
F.F.L. -3.30
RECTANGULAR COLUMN WAS CREATED (W68CM*L117CM)WITH THE ADDITION OF SUBFRAME TO COVER CIRCULAR COLUMNS
SHOW GARAGE
RAMP TO BASEMENT 32.00m SLOPE 10% F.F.L. -3.25 F.F.L. -3.25 MAID'S ROOM
ENTRANCE
F.F.L. -3.25 F.F.L. -3.09 F.F.L. -3.25 F.F.L. -3.38 SHISHA LOUNGE
COLUMN WAS ENLARGED TO BE (W30CM*L75CM)WITH THE ADDITION OF SUBFRAME
MAID'S BATHROOM
GENERAL NOTES:
F.F.L. -3.25 SUNKEN GARDEN
F.F.L. -3.25
LOBBY 01 F.F.L. -3.38 STAIR 01 F.F.L. -2.17
F.F.L. -3.30 STAIR 02 KITCHEN F.F.L. -3.25 F.F.L. -3.25
F.F.L. -3.25
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
F.F.L. -3.30 REVISION:
SERVICE ENTRANCE
05
F.F.L. -3.25
04
BATHROOM 01
03
F.F.L. -3.25 F.F.L. -3.25
02
F.F.L. -3.25
01 NO. DESCRIPTION
DATE
ELEC.
MR. MOHAMED FARUQE
SERVICE ENTRANCE
OWNER
F.F.L. -3.25
F.F.L. -3.25 LOBBY 02 LAUNDRY F.F.L. -3.25
LOBBY 03
VILLA 123
F.F.L. -3.25
MECHANICAL
PROJECT
F.F.L. -3.25 GAMING OPEN ROOM
F.F.L. -3.25
DUBAI LOCATION
CINEMA
PROJECTOR
CONCEPT DESIGN PHASE F.F.L. -3.70
SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE
F.F.L. -3.25
CONSTRUCTION DRAWINGS PHASE
BAESMENT FLOOR DIMENSION PLAN
DRAWING TITLE
PUMP ROOM & BALANCETANK WATER TANK
JULY 2023
ISSUE DATE
F.F.L. -3.25
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
1:50
Arch. DINA HADDADIN
PROJECT No
SHEET No
IP200
FOR TENDERING BBQ F.F.L. -3.20
DIMENSION LAYOUT LEGEND SYMBOL
DESCRIPTION
F.F.L. -0.20
CLEAR DIMENSION
SHOW KITCHEN F.F.L. +0.45 F.F.L. -2.59 OPEN TO ABOVE OPEN TO SKY
LIVING ROOM
F.F.L. +0.45
F.F.L. +0.45 LOBBY 02 F.F.L. +0.607 TV
n Sunke n e Gard
DINING AREA
FAMILY BATHROOM F.F.L. +0.45
BANQUETING AREA F.F.L. +0.45
F.F.L. +0.40
GUEST SUITE 01 F.F.L. +0.45 STAIR 02
SHOWER OPEN TO ABOVE
LOBBY 03 F.F.L. +0.45
STAIR 01
GUEST SUITE 01 BATHROOM
OPEN TO SKY
DIRTY KITCHEN
F.F.L. -3.20
GUEST SUITE 02 BATHROOM
LOBBY 01
REFLECTIVE POOL
F.F.L. +0.45
F.F.L. +0.45
F.F.L. +0.45 LOBBY 04 GENERAL NOTES:
RAMP TO BASEMENT 32.00m
950x20cm
SLOPE 10%
40x80cm 200x20cm
F.F.L. +0.45
WC SHOWER
F.F.L. +0.45
SHOWER
F.F.L. +0.45 PANTRY
F.F.L. +0.45 POWDER ROOM
FOYER
GUEST SUITE 03 BATHROOM F.F.L. +0.45
GUEST SUITE 02 F.F.L. +0.45
OPEN TO ABOVE
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
SIDE ENTRANCE F.F.L. +0.40 REVISION:
GUEST SUITE 03 F.F.L. +0.45
MAIN ENTRANCE REFLECTIVE POOL
05 04 03
F.F.L. +0.40 02 01 NO. DESCRIPTION
DATE
MR. MOHAMED FARUQE OWNER
VILLA 123 PROJECT
F.F.L. -0.20
DUBAI LOCATION
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE GARBAGE RM
DESIGN DEVELOPMENT PHASE
ELECT. RM.
CONSTRUCTION DRAWINGS PHASE
F.F.L. +7.66
GROUND FLOOR DIMENSION PLAN
F.F.L. +7.66 DRAWING TITLE
JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
Arch. DINA HADDADIN
LPG METER
GATE LEVEL
PAPER SIZE DRAWING SCALE
A1
1:50
PROJECT No
SHEET No
IP201
FOR TENDERING EDGE OF CANOPY
EDGE OF CANOPY
DIMENSION LAYOUT LEGEND SYMBOL SEMI-COVERED BALCONY
DESCRIPTION CLEAR DIMENSION
F.F.L. +4.80
LIMIT IF PERGOLA
TERRACE
FAMILY ROOM F.F.L. +4.85
OPEN TO BELOW OPEN TO SKY MASTER BEDROOM 03
open to sky
F.F.L. +4.85
LOBBY 01 GUEST SUITE 05
MASTER BEDROOM 03 BATHROOM F.F.L. +4.85
F.F.L. +4.85
LOBBY 03
F.F.L. +4.85
F.F.L. +4.85
SHOWER F.F.L. +4.85
SHOWER F.F.L. +4.85
MASTER BEDROOM 03 DRESSING F.F.L. +4.85
GUEST SUITE 05 BATHROOM GENERAL NOTES:
OPEN TO BELOW
WC
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
LOBBY 02 STAIR 02
WC
OPEN TO SKY MASTER BEDROOM 02 DRESSING
GUEST SUITE 04
F.F.L. +4.85 F.F.L. +4.85
SHOWER SHOWER
F.F.L. +4.85 F.F.L. +4.85 GUEST SUITE 04 BATHROOM
REVISION: 05
MASTER BEDROOM 02 BATHROOM
04
F.F.L. +4.85 WC
F.F.L. +4.85
03
LOBBY 04
02
F.F.L. +4.85 open to sky
01 NO. DESCRIPTION
MASTER BEDROOM 01 BATHROOM
DATE
SHOWER
OPEN TO BELOW
MR. MOHAMED FARUQE
WC
MASTER BEDROOM 02
OWNER
F.F.L. +4.85
VILLA 123 BATHTUB
PROJECT
DUBAI LOCATION
MASTER BEDROOM 01 DRESSING
MASTER BEDROOM 01 F.F.L. +4.85
CONCEPT DESIGN PHASE
OPEN TO SKY BALCONY
SCHEMATIC DESIGN PHASE EDGE OF CANOPY
DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE COVERED BALCONY
FIRST FLOOR DIMENSION PLAN
DRAWING TITLE
JULY 2023
ISSUE DATE
EDGE OF CANOPY
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
1:50
Arch. DINA HADDADIN
PROJECT No
SHEET No
IP202
FOR TENDERING
DIMENSION LAYOUT LEGEND
CANOPY
SYMBOL
DESCRIPTION CLEAR DIMENSION
FIRE PIT
F.F.L. +8.60 OPEN TO SKY
ROOF LOUNGE F.F.L. +9.20
JACUZZI
F.F.L. +8.90
SHOWER
BATHROOM F.F.L. +8.65
BBQ AREA
GENERAL NOTES:
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
LOBBY 01
SERVICE AREA
F.F.L. +8.60
OPEN TO SKY F.F.L. +8.60 F.F.L. +8.65
REVISION: 05 04 03 02 01 NO. DESCRIPTION
DATE
MR. MOHAMED FARUQE F.F.L. +8.60
SERVICE AREA
OWNER
VILLA 123 PROJECT
DUBAI LOCATION
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE F.F.L. +9.45
DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
ROOF FLOOR DIMENSION PLAN
DRAWING TITLE
ENTRY FRAME
JULY 2023
ISSUE DATE
F.F.L. +8.25 DESIGNED BY:
DRAWN BY:
CANOPY
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
1:50
Arch. DINA HADDADIN
PROJECT No
SHEET No
IP203
FOR TENDERING
F.F.L. -3.25 PUMPROOM & BALANCE TANK
F.F.L. -3.30
F.F.L. -3.25 FR-FI03
FR-FI05
FR-FI04
DRIVER'S BATHROOM
FR-FI18 FR-FI19
TV
F.F.L. -3.30
FR-FI06 FR-AC05 FR-FI15 FR-AC02 F.F.L. -3.25
FR-FI01
DRIVER'S ROOM FR-AC01 F.F.L. -3.25 GARDEN BATHROOM FR-FI02 FR-FI14
F.F.L. -3.30
SHOW GARAGE FR-S01 RAMP TO BASEMENT 32.00m SLOPE 10% F.F.L. -3.25 F.F.L. -3.25 MAID'S ROOM
FR-T01
ENTRANCE
F.F.L. -3.25 FR-T02 F.F.L. -3.09 FR-S01 F.F.L. -3.25 F.F.L. -3.38
FR-T03 SHISHA LOUNGE
FR-FI04 FR-FI03 MAID'S BATHROOM
GENERAL NOTES:
F.F.L. -3.25 FR-S02
FR-CH01
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
FR-CH01
SUNKEN GARDEN
F.F.L. -3.25 FR-FI05 LOBBY 01 F.F.L. -3.38 STAIR 01 F.F.L. -2.17
F.F.L. -3.30 STAIR 02 FR-ST01
KITCHEN
FR-ST01
F.F.L. -3.25 F.F.L. -3.25 FR-ST01
F.F.L. -3.25
FR-T13
F.F.L. -3.30 SERVICE ENTRANCE
FR-ST01
FR-FI15
FR-ST01
FR-ST01
FR-ST01
REVISION: 05
FR-FI01 FR-AC02 BATHROOM 01 FR-AC01 FR-FI14
F.F.L. -3.25
04 03
F.F.L. -3.25 F.F.L. -3.25
02
F.F.L. -3.25
FR-FI02
01 NO. DESCRIPTION
DATE
ELEC. SERVICE ENTRANCE
FR-CU01
LOBBY 02 LAUNDRY LOBBY 03
FR-CH06
F.F.L. -3.25
F.F.L. -3.25
F.F.L. -3.25
MR. MOHAMED FARUQE
FR-CH06
F.F.L. -3.25
FR-S03
MECHANICAL
OWNER
FR-T12
VILLA 123 PROJECT
F.F.L. -3.25 FR-CH06
GAMING OPEN ROOM
FR-CH06
DUBAI
F.F.L. -3.25
LOCATION
CINEMA
PROJECTOR
FR-CU01
CONCEPT DESIGN PHASE
F.F.L. -3.70
SCHEMATIC DESIGN PHASE
FR-S03 INDY500 WIDE
F.F.L. -3.25
INDY500 WIDE INDY500 WIDE
DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
BAESMENT FLOOR FURNITURE PLAN
FR-S03 DRAWING TITLE
PUMP ROOM & BALANCETANK WATER TANK
F.F.L. -3.25
JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
1:50
Arch. DINA HADDADIN
PROJECT No
SHEET No
IP300
FOR TENDERING BBQ F.F.L. -3.20
F.F.L. -0.20
SHOW KITCHEN F.F.L. +0.45 FR-CH03
F.F.L. -2.59
FR-CH03
FR-S04 FR-CH03
FR-S05
OPEN TO SKY
OPEN TO ABOVE
FR-S05
FR-T05
FR-CH03
FR-S02 LIVING ROOM
FR-CH03
FR-T06 F.F.L. +0.45
FR-CH03
F.F.L. +0.45 LOBBY 02 F.F.L. +0.607 TV
n Sunke n e Gard
FR-NS01
DINING AREA FR-FI14
FR-NS02
FR-FI08 FR-AC02 FR-FI01
FAMILY BATHROOM F.F.L. +0.45
BANQUETING AREA
FR-CH02
FR-BE01
F.F.L. +0.45 F.F.L. +0.40
FR-AC01
FR-FI15
FR-CH02
FR-CH02
FR-CH02
FR-CH02
GUEST SUITE 01 F.F.L. +0.45
FR-T04 FR-FI06
STAIR 02 FR-CH02
50" TV
FR-FI01
FR-CH02 SHOWER OPEN TO ABOVE
FR-CH02
LOBBY 03 F.F.L. +0.45
FR-CH02
GUEST SUITE 01 BATHROOM
OPEN TO SKY
DIRTY KITCHEN
STAIR 01
LOBBY 01
FR-CH02
FR-CH02
FR-CH02
FR-CH02
FR-FI09
GUEST SUITE 02 BATHROOM REFLECTIVE POOL
F.F.L. +0.45
F.F.L. +0.45
F.F.L. +0.45
FR-FI01
FR-CH02
RAMP TO BASEMENT 32.00m
F.F.L. -3.20
FR-CH04
GENERAL NOTES:
LOBBY 04
FR-FI09
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
950x20cm
SLOPE 10%
40x80cm 200x20cm
F.F.L. +0.45
FR-FI06 FR-FI15
SHOWER
F.F.L. +0.45
FR-AC02
PANTRY
FR-AC01
SHOWER
FR-FI01
FR-FI01
F.F.L. +0.45
FR-FI06
WC
F.F.L. +0.45 POWDER ROOM
FOYER
GUEST SUITE 03 BATHROOM F.F.L. +0.45
FR-FI07 FR-FI14
GUEST SUITE 02 F.F.L. +0.45
FR-FI09 OPEN TO ABOVE
SIDE ENTRANCE
REVISION:
F.F.L. +0.40
FR-BE01
FR-NS02 GUEST SUITE 03 F.F.L. +0.45
MAIN ENTRANCE REFLECTIVE POOL
05
50" TV
04 03
50" TV FR-NS02
F.F.L. +0.40
FR-CH04 FR-BE01
FR-CH04
02 01 NO. DESCRIPTION
DATE
MR. MOHAMED FARUQE OWNER
FR-NS01
VILLA 123 PROJECT
DUBAI
F.F.L. -0.20 LOCATION
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE GARBAGE RM
CONSTRUCTION DRAWINGS PHASE
ELECT. RM.
F.F.L. +7.66
GROUND FLOOR FURNITURE PLAN
DRAWING TITLE
F.F.L. +7.66
JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
Arch. DINA HADDADIN
LPG METER PAPER SIZE DRAWING SCALE
GATE LEVEL
A1
1:50
PROJECT No
SHEET No
IP301
EDGE OF CANOPY
FOR TENDERING
EDGE OF CANOPY
SEMI-COVERED BALCONY
FR-CH05
F.F.L. +4.80
FR-CH05
FR-T10 LIMIT IF PERGOLA
TERRACE FR-CH05
FR-T08
FR-CH05
FR-CH05
FR-CH05
FR-S03
FR-S07
FR-T07 FAMILY ROOM
50" TV
F.F.L. +4.85 FR-T09 OPEN TO BELOW CUSTOM-MADE TV UNIT
OPEN TO SKY MASTER BEDROOM 03
open to sky
FR-S06
F.F.L.FR-BE02 +4.85
FR-NS03 FR-T11
FR-BE01
FR-NS04
LOBBY 01
FR-CH04 GUEST SUITE 05
MASTER BEDROOM 03 BATHROOM F.F.L. +4.85
F.F.L. +4.85
LOBBY 03
F.F.L. +4.85
F.F.L. +4.85 FR-FI12
50" TV
FR-FI11 FR-FI06
SHOWER
FR-FI01 F.F.L. +4.85
SHOWER
FR-FI06
F.F.L. +4.85
MASTER BEDROOM 03 DRESSING
FR-FI10
F.F.L. +4.85
GUEST SUITE 05 BATHROOM FR-FI09
OPEN TO BELOW
WC FR-FI11 FR-FI01
LOBBY 02 STAIR 02 50" TV
GENERAL NOTES:
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
FR-FI01 FR-CH04 WC
FR-FI11
OPEN TO SKY MASTER BEDROOM 02 DRESSING
FR-FI10
GUEST SUITE 04
F.F.L. +4.85 F.F.L. +4.85
FR-FI11 FR-FI06 SHOWER SHOWER
FR-FI09
F.F.L. +4.85
FR-FI06
F.F.L. +4.85
FR-BE01
FR-NS03 GUEST SUITE 04 BATHROOM FR-FI12
FR-NS04
MASTER BEDROOM 02 BATHROOM
FR-FI01
F.F.L. +4.85 WC
F.F.L. +4.85 LOBBY 04
FR-FI11
REVISION:
FR-FI06
F.F.L. +4.85
05
FR-FI11
open to sky
04
MASTER BEDROOM 01 BATHROOM FR-FI01
FR-FI10
OPEN TO BELOW
03
SHOWER
02
WC
MASTER BEDROOM 02
01 NO. DESCRIPTION
FR-BE02 F.F.L. +4.85
DATE
FR-FI12
MR. MOHAMED FARUQE
BATHTUB OWNER
FR-BE02 32" TV FR-S08 MASTER BEDROOM 01 DRESSING
FR-CH06
VILLA 123 PROJECT
MASTER BEDROOM 01 F.F.L. +4.85
FR-T11
DUBAI
50" TV LOCATION
OPEN TO SKY BALCONY FR-T11 EDGE OF CANOPY
CONCEPT DESIGN PHASE COVERED BALCONY
SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
FIRST FLOOR FURNITURE PLAN
DRAWING TITLE
EDGE OF CANOPY
JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
1:50
Arch. DINA HADDADIN
PROJECT No
SHEET No
IP302
FOR TENDERING CANOPY
FIRE PIT
F.F.L. +8.60 FR-SB01
FR-SB01
FR-T12
OPEN TO SKY
ROOF LOUNGE F.F.L. +9.20 FR-S09
FR-S09
JACUZZI
F.F.L. +8.90
FR-FI06 FR-FI01 SHOWER
BATHROOM F.F.L. +8.65
FR-ST02
FR-FI13
FR-ST02
FR-ST02 FR-ST02
BBQ AREA
FR-ST02
LOBBY 01 FR-ST02
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
SERVICE AREA
F.F.L. +8.60
GENERAL NOTES:
OPEN TO SKY F.F.L. +8.60 F.F.L. +8.65
REVISION: 05 04 03 02 01 NO. DESCRIPTION
F.F.L. +8.60
DATE
SERVICE AREA
MR. MOHAMED FARUQE OWNER
VILLA 123 PROJECT
DUBAI LOCATION
F.F.L. +9.45
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
ROOF FLOOR FURNITURE PLAN
DRAWING TITLE
ENTRY FRAME
F.F.L. +8.25
JULY 2023
ISSUE DATE
CANOPY DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
1:50
Arch. DINA HADDADIN
PROJECT No
SHEET No
IP303
FOR TENDERING LEGEND HATCH
DESCRIPTION F.C.L. -0.58 B.O.S. +0.02 LINTEL F.C.L. -0.33 B.O.S. +0.02
LINTEL -0.88
EXPOSED CEILING B.O.S. +0.02
PUMPROOM & BALANCE TANK
CURTAIN TRACK
EXPOSED CEILING B.O.S. +0.02
F.C.L. -0.55 B.O.S. -0.18 F.C.L. -0.55 B.O.S. +0.02
CD05
CD05
CD30 F.C.L. -0.58 B.O.S. +0.02
DRIVER'S BATHROOM
CD05
LINTEL -1.08 TV CD02
F.C.L. -0.58 B.O.S. +0.02 DRIVER'S ROOM
CD29
CD05
CD05
CD05
CD29
CD29
CD29
F.C.L. -0.55 B.O.S. -0.18
CD30
SHOW GARAGE
CD05
EXPOSED CEILING B.O.S. +0.02
CD19 EXPOSED CEILING B.O.S. +0.02
CD05
CD29 CD29 CD29
CD29
CD05 MAID'S BATHROOM F.C.L. -0.45 B.O.S. +0.02
F.C.L. -0.23 B.O.S. +0.02
CD29
CD29
CD05
CD05 CD01
CD05
CD05
CD29 CD29
CD05
CD05
CD05
F.C.L. -0.55 B.O.S. +0.02
F.C.L. -0.45 B.O.S. +0.02
F.C.L. -0.55 B.O.S. -0.18
CD05
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
SUNKEN GARDEN F.C.L. -0.33 B.O.S. +0.02
STAIR 01
GENERAL NOTES:
CD05 LINTEL -1.08
CD05
SHISHA LOUNGE
LOBBY 01 F.C.L. -0.45 B.O.S. +0.02
EXPOSED CEILING B.O.S. +0.02
F.C.L. -0.33 B.O.S. +0.02
EXPOSED CEILING B.O.S. +0.02
CD29
CD29
CD05
CD30
ENTRANCE
F.C.L. -0.55 B.O.S. -0.18
F.C.L. -0.33 B.O.S. +0.02
CD10
CD10
F.C.L. -0.45 B.O.S. +0.02 MAID'S ROOM
CD05
LINTEL -0.88
CD05
F.C.L. -0.55 B.O.S. +0.02
RAMP TO BASEMENT 32.00m SLOPE 10%
F.C.L. -0.33 B.O.S. +0.02 GARDEN BATHROOM
CD29
CD29
CD05
CD30
CD05 F.C.L. -0.23 B.O.S. +0.02
CD29
CD29
LINTEL -0.88
CD33
F.C.L. -0.33 B.O.S. +0.02
CD29
STAIR 02
EXPOSED CEILING B.O.S. +0.02
KITCHEN
CD30
SERVICE ENTRANCE
ELEC. SERVICE ENTRANCE
CD05
NO. DESCRIPTION
MR. MOHAMED FARUQE OWNER
F.C.L. -0.45 B.O.S. +0.02
LOBBY 02
DATE
EXPOSED CEILING B.O.S. +0.02
CD12
CD05
EXPOSED CEILING B.O.S. +0.02
MECHANICAL
VILLA 123 CD05
CD05
PROJECT
GAMING OPEN ROOM
CD05 F.C.L. -0.58 B.O.S. +0.02
CD05
CD05
CINEMA PROJECTOR PROVISION
CD05
CD05
LINTEL -1.08
F.C.L. -0.33 B.O.S. +0.02
CONCEPT DESIGN PHASE
CEILING T.V&DATA OUTLET
SCHEMATIC DESIGN PHASE
WALL T.V&DATA OUTLET CD05
CD05
DUBAI LOCATION
CD12
DESIGN DEVELOPMENT PHASE CD05
F.C.L. -0.45 B.O.S. -0.18
CD05
F.C.L. -0.45 B.O.S. -0.18
CD05
PROJECTOR PROJECTOR PROVISION
CD05
CONSTRUCTION DRAWINGS PHASE
BAESMENT FLOOR REFLECTED CEILING PLAN
DRAWING TITLE
PUMP ROOM & BALANCETANK WATER TANK
CD05
F.C.L. -0.45 B.O.S. -0.18
CD05
CD05
LOBBY 03 LINTEL -1.08
F.C.L. -0.45 B.O.S. +0.02
02 01
LINTEL -0.88 F.C.L. -0.23 B.O.S. +0.02 CD25
LINTEL -1.08
F.C.L. -0.45 B.O.S. +0.02 LAUNDRY
03
EXPOSED CEILING B.O.S. +0.02
CD01
LINTEL -1.08
LINTEL -1.08
CD05
04
F.C.L. -0.33 B.O.S. +0.02
CD01
CD05
F.C.L. -0.45 B.O.S. +0.02 LINTEL -1.08
CD05 BATHROOM 01 F.C.L. -0.33 B.O.S. +0.02 CD02
CD05
CD05
F.C.L. -0.45 B.O.S. +0.02
CD05
F.C.L. -0.45 B.O.S. +0.02
05
CD01
LINTEL -0.88
LINTEL -1.08
REVISION:
F.C.L. -0.23 B.O.S. +0.02
CD33
CD05
CD05
F.C.L. -0.23 B.O.S. +0.02
CD30
CD30
CD05
CD05
JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
1:50
Arch. DINA HADDADIN
PROJECT No
SHEET No
IP400
FOR TENDERING BBQ
LEGEND HATCH
DESCRIPTION F.C.L. +4.05 B.O.S. +4.42 LINTEL
F.C.L. +4.20 B.O.S. +4.42
CD04
SHOW KITCHEN F.C.L. +4.05 B.O.S. +4.42
F.C.L. +4.05 B.O.S. +4.42
F.C.L. +4.20 B.O.S. +4.42
F.C.L. +3.80 B.O.S. +4.42
CD03
CD03
F.C.L. +4.20 B.O.S. +4.42
F.C.L. +2.70 B.O.S. +4.42
OPEN TO ABOVE OPEN TO SKY
CD03
CD03 F.C.L. +4.20 B.O.S. +4.42
CD05
CD24 LIVING ROOM F.C.L. +4.05 B.O.S. +4.42
F.C.L. +4.15 B.O.S. +4.42
F.C.L. +4.20 B.O.S. +4.42
DINING AREA
n Sunke n e Gard
CD27 F.C.L. +3.90 B.O.S. +4.42
CD26
CD05
BANQUETING AREA F.C.L. +4.15 B.O.S. +4.42 CD02
LINTEL +2.92 F.C.L. +3.80 B.O.S. +4.42
F.C.L. +4.20 B.O.S. +4.42
F.C.L. +4.05 B.O.S. +4.42
F.C.L. +4.05 B.O.S. +4.42
CD05 F.C.L. +4.20 B.O.S. +4.42
F.C.L. +4.15 B.O.S. +4.42
GUEST SUITE 01
F.C.L. +2.70 B.O.S. +4.42
CD26
F.C.L. +3.55 B.O.S. +4.42
STAIR 02
CD01
CD01
F.C.L. +3.80 B.O.S. +4.42
CD05
CD18
TV F.C.L. +4.15 B.O.S. +4.42
F.C.L. +4.05 B.O.S. +4.42
F.C.L. +3.90 B.O.S. +4.42
CD01 FAMILY BATHROOM
CD22
F.C.L. +4.15 B.O.S. +4.42
F.C.L. +4.05 B.O.S. +4.42
F.C.L. +4.20 B.O.S. +4.42
LOBBY 02 +4.05 F.C.L. B.O.S. +4.42
CD24
CD05
CD25
F.C.L. +4.05 B.O.S. +4.42
CD02
CD25
CD24
CD24
F.C.L. +4.20 B.O.S. +4.42
CD01
LINTEL +2.92
SHOWER OPEN TO ABOVE
CD05
LOBBY 04
950x20cm
F.C.L. +4.05 B.O.S. +4.42
F.C.L. +4.05 B.O.S. +4.42
CD20
CD27
CD18 F.C.L. +4.20 B.O.S. +4.42
CD24
CD02
CD05
CD01
SHOWER F.C.L. +3.55 B.O.S. +4.42
F.C.L. +3.45 B.O.S. +4.42
F.C.L. +3.55 SHOWER B.O.S. +4.42
CD05
LINTEL +3.45
CD21 FOYER
GUEST SUITE 03 BATHROOM F.C.L. +3.45 B.O.S. +4.42
F.C.L. +4.05 B.O.S. +4.42
GUEST SUITE 02 CD05
CD23
OPEN TO ABOVE F.C.L. +3.55 B.O.S. +4.42
SIDE ENTRANCE
F.C.L. +4.20 B.O.S. +4.42 F.C.L. +4.20 B.O.S. +4.42 GUEST SUITE 03
MAIN ENTRANCE
F.C.L. +4.05 B.O.S. +4.42
REFLECTIVE POOL
F.C.L. +4.05 B.O.S. +4.42
05
CD23
04
F.C.L. +4.20 B.O.S. +4.42 CD23
CD23
CD03
CD31
CD31
F.C.L. +4.20 B.O.S. +4.42
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations. REVISION:
CD03
F.C.L. +3.80 B.O.S. +4.42 POWDER ROOM F.C.L. +3.95 B.O.S. +4.42
F.C.L. +3.45 B.O.S. +4.42
F.C.L. +3.60 B.O.S. +4.42
CD05
LINTEL +3.87
WC
F.C.L. +3.45 B.O.S. +4.42
F.C.L. +3.55 B.O.S. +4.42
LINTEL +4.12
LINTEL +3.52
CD01
PANTRY
F.C.L. +4.20 B.O.S. +4.42
CD01
GENERAL NOTES:
CD26
CD05 CD24
CD26
CD03
F.C.L. +3.45 B.O.S. +4.42
LINTEL +4.12
F.C.L. +4.15 B.O.S. +4.42 CD01
CD22
LINTEL +2.92
F.C.L. +4.20 B.O.S. +4.42
CD24
CD05
F.C.L. +3.95 B.O.S. +4.42
GUEST 02 BATHROOM 1 CD0SUITE CD32 F.C.L. +4.20 F.C.L. +3.55 B.O.S. +4.42 B.O.S. +4.42
CD05
CD24
CD03
40x80cm 200x20cm
CD05
REFLECTIVE POOL
F.C.L. +4.20 B.O.S. +4.42
LINTEL +4.12
F.C.L. +3.55 B.O.S. +4.42
CD27
F.C.L. +4.15 B.O.S. +4.42
CD05
RAMP TO BASEMENT 32.00m SLOPE 10%
LOBBY 01 F.C.L. +4.05 B.O.S. +4.42
GUEST SUITE 01 BATHROOM F.C.L. +3.45 B.O.S. +4.42
CD05
CD02
CD01
F.C.L. +3.45 B.O.S. +4.42
OPEN TO SKY
CD01
F.C.L. +3.80 B.O.S. +4.42
STAIR 01
F.C.L. +4.05 B.O.S. +4.42
CD27
DIRTY KITCHEN
CD05
LOBBY 03
CD27
LINTEL +2.92
F.C.L. +4.20 B.O.S. +4.42
03 02 01 NO. DESCRIPTION
DATE
MR. MOHAMED FARUQE F.C.L. +4.20 B.O.S. +4.42
OWNER
VILLA 123 PROJECT
DUBAI LOCATION
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE GARBAGE RM
DESIGN DEVELOPMENT PHASE ELECT. RM.
CONSTRUCTION DRAWINGS PHASE
GROUND FLOOR REFLECTED CEILING PLAN
DRAWING TITLE
JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
Arch. DINA HADDADIN
LPG METER
GATE LEVEL
PAPER SIZE DRAWING SCALE
A1
1:50
PROJECT No
SHEET No
IP401
FOR TENDERING EDGE OF CANOPY
EDGE OF CANOPY
LEGEND HATCH
DESCRIPTION F.C.L. +7.85 B.O.S. +8.22
SEMI-COVERED BALCONY
LINTEL F.C.L. +7.60 B.O.S. +8.22 LIMIT IF PERGOLA F.C.L. +8.00 B.O.S. +8.22
TERRACE
CD03
CD05
F.C.L. +8.00 B.O.S. +8.22
F.C.L. +8.00 B.O.S. +8.22
FAMILY ROOM F.C.L. +7.85 B.O.S. +8.22
F.C.L. +8.00 B.O.S. +8.22
F.C.L. +8.00 B.O.S. +8.22
CD03
F.C.L. +7.85 B.O.S. +8.22
CD23
F.C.L. +8.00 B.O.S. +8.22
F.C.L. +7.95 B.O.S. +8.22 F.C.L. +8.00 B.O.S. +8.22
CD23
open to sky
OPEN TO BELOW
OPEN TO SKY
MASTER BEDROOM 03 F.C.L. +7.85 B.O.S. +8.22
CD04
CD04
CD03
C D0 2
CD04
CD04
CD02
MASTER BEDROOM 03 BATHROOM
CD03
LINTEL +7.92
CD09
F.C.L. +7.85 B.O.S. +8.22
LOBBY 03 F.C.L. +7.85 B.O.S. +8.22
EXPOSED CEILING B.O.S. +8.22
CD05
CD03
F.C.L. +8.00 B.O.S. +8.22
F.C.L. +7.70 B.O.S. +8.22
CD06 F.C.L. +7.95 B.O.S. +8.22
MASTER BEDROOM 03 DRESSING F.C.L. +7.85 B.O.S. +8.22
F.C.L. +7.60 B.O.S. +8.22
CD21
F.C.L. +7.95 B.O.S. +8.22
OPEN TO BELOW CD04
LINTEL +7.92
LOBBY 02 STAIR 02
OPEN TO SKY F.C.L. +8.00 B.O.S. +8.22
CD05
F.C.L. +7.85 B.O.S. +8.22
CD05
CD05
CD03
CD03
CD11
CD01
F.C.L. +7.85 B.O.S. +8.22
LINTEL +7.92
CD02
CD03
F.C.L. +8.00 B.O.S. +8.22
F.C.L. +7.70 B.O.S. +8.22 F.C.L. +7.60 B.O.S. +8.22
F.C.L. +7.60 B.O.S. +8.22
F.C.L. +7.95 B.O.S. +8.22
CD02
F.C.L. +7.85 B.O.S. +8.22
F.C.L. +8.00 B.O.S. +8.22
CD03
02 01
CD16
NO. DESCRIPTION
EXPOSED CEILING B.O.S. +8.22 F.C.L. +7.60 B.O.S. +8.22 BATHTUB
F.C.L. +7.85 B.O.S. +8.22
F.C.L. +7.90 B.O.S. +8.22
DATE
F.C.L. +8.00 B.O.S. +8.22
MR. MOHAMED FARUQE OWNER
F.C.L. +7.85 B.O.S. +8.22
CD28
CD28
OPEN TO SKY BALCONY
CD16
MASTER BEDROOM 01
F.C.L. +8.00 B.O.S. +8.22
VILLA 123 CD13 CD13
MASTER BEDROOM 01 DRESSING
EDGE OF CANOPY
03
CD15
CD05
CD28
F.C.L. +8.00 B.O.S. +8.22
CD13 SHOWER
CD05 CD03
05
MASTER BEDROOM 01 BATHROOM
F.C.L. +7.95 B.O.S. +8.22 WC
CD04
CD05
REVISION:
04
F.C.L. +8.00 B.O.S. +8.22
CD14
MASTER BEDROOM 02 F.C.L. +7.85 B.O.S. +8.22
F.C.L. +7.75 B.O.S. +8.22
CD17
OPEN TO BELOW
CD05
F.C.L. +8.00 B.O.S. +8.22
WC
CD01
CD03
F.C.L. +7.60 B.O.S. +8.22
CD05
LOBBY 04 F.C.L. +7.85 B.O.S. +8.22
F.C.L. +7.70 B.O.S. +8.22
F.C.L. +8.00 B.O.S. +8.22
CD26
EXPOSED CEILING B.O.S. +8.22
CD03
CD05
CD23
GUEST SUITE 04 BATHROOM
LINTEL +7.92
F.C.L. +8.00 B.O.S. +8.22
CD26
CD01
F.C.L. +7.70 B.O.S. +8.22
CD09
MASTER BEDROOM 02 BATHROOM
GUEST SUITE 04 F.C.L. +7.85 B.O.S. +8.22
F.C.L. +7.70 B.O.S. +8.22
F.C.L. +7.85 B.O.S. +8.22 F.C.L. +7.60 SHOWER B.O.S. +8.22
F.C.L. +7.60 B.O.S. +8.22
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
CD26
LINTEL +7.92
CD01
CD01
F.C.L. +7.70 B.O.S. +8.22
GENERAL NOTES:
F.C.L. +8.00 B.O.S. +8.22
CD03 SHOWER
F.C.L. +7.70 B.O.S. +8.22
F.C.L. +7.85 B.O.S. +8.22
CD05
F.C.L. +7.85 B.O.S. +8.22
F.C.L. +7.60 B.O.S. +8.22
F.C.L. +8.00 B.O.S. +8.22
GUEST SUITE 05 BATHROOM
F.C.L. +7.85 B.O.S. +8.22
MASTER BEDROOM 02 DRESSING
CD05
CD13
F.C.L. +7.85 B.O.S. +8.22
CD21
60
CD05
F.C.L. +7.70 B.O.S. +8.22
CD01
CD05
CD22
WC
CD05
CD05
SHOWER
F.C.L. +7.95 B.O.S. +8.22
F.C.L. +8.00 B.O.S. +8.22
open to sky
F.C.L. +7.70 B.O.S. +8.22
CD05
F.C.L. +7.60 B.O.S. +8.22
AP
CD18
CD05
F.C.L. +8.00 B.O.S. +8.22
F.C.L. +7.95 B.O.S. +8.22
CD06
F.C.L. +7.60 B.O.S. +8.22
F.C.L. +7.85 B.O.S. +8.22
F.C.L. +7.95 B.O.S. +8.22
CD05
CD02
F.C.L. +7.60 B.O.S. +8.22 WC
CD06
CD26
GUEST SUITE 05
CD01
F.C.L. +7.60 B.O.S. +8.22
F.C.L. +8.00 B.O.S. +8.22
CD02
CD05
F.C.L. +7.70 B.O.S. +8.22
CD02
CD01
CD01
CD01
F.C.L. +7.85 B.O.S. +8.22
F.C.L. +7.95 B.O.S. +8.22
F.C.L. +8.00 B.O.S. +8.22
F.C.L. +7.85 B.O.S. +8.22 F.C.L. +7.70 B.O.S. +8.22
20
F.C.L. +8.00 B.O.S. +8.22
CD03 SHOWER F.C.L. +7.60 B.O.S. +8.22
F.C.L. +7.95 B.O.S. +8.22
LOBBY 01
CD05
CD06 F.C.L. +7.70 B.O.S. +8.22
F.C.L. +8.00 B.O.S. +8.22
CD03
CD05
PROJECT
DUBAI LOCATION
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE
COVERED BALCONY
DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
FIRST FLOOR REFLECTED CEILING PLAN
DRAWING TITLE
EDGE OF CANOPY
JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
1:50
Arch. DINA HADDADIN
PROJECT No
SHEET No
IP402
FOR TENDERING LEGEND HATCH
CANOPY
DESCRIPTION F.C.L. +10.85 B.O.S. +11.30 LINTEL F.C.L. +10.70 B.O.S. +11.30
FIRE PIT
OPEN TO SKY
ROOF LOUNGE
CD05
JACUZZI
CD01 F.C.L. +10.95 B.O.S. +11.30
CD05
F.C.L. +10.85 B.O.S. +11.30 BATHROOM
SHOWER
CD01 CD05
F.C.L. +10.95 B.O.S. +11.30
F.C.L. +11.15 B.O.S. +11.30
BBQ AREA CD05
CD05
LINTEL +10.92 F.C.L. +11.10 B.O.S. +11.30
F.C.L. +11.00 B.O.S. +11.30
CD22 LOBBY 01 F.C.L. +11.00 B.O.S. +11.30
GENERAL NOTES:
CD03
CD03
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
F.C.L. +11.15 B.O.S. +11.30
F.C.L. +11.10 B.O.S. +11.30
CD22
SERVICE AREA
CD22
F.C.L. +11.15 B.O.S. +11.30 F.C.L. +11.10 B.O.S. +11.30
OPEN TO SKY
F.C.L. +11.15 B.O.S. +11.30 F.C.L. +11.00 B.O.S. +11.30 F.C.L. +11.15 B.O.S. +11.30
CD03
CD03 REVISION: 05 04 03 02 01 NO. DESCRIPTION
DATE
MR. MOHAMED FARUQE SERVICE AREA
OWNER
VILLA 123 PROJECT
DUBAI LOCATION
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
ROOF FLOOR REFLECTED CEILING PLAN
DRAWING TITLE
ENTRY FRAME
JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
CANOPY
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
1:50
Arch. DINA HADDADIN
PROJECT No
SHEET No
IP403
FOR TENDERING LEGEND CODE
PUMPROOM & LI03 BALANCE TANK
LI03
LI01
HIDDEN LIGHT
LI02
SPOT LIGHT
LI03
SPOT LIGHT
LI04
CEILING MOUNTED LINEAR LIGHT
LI05
PENDANT LIGHT
LI06
DIRECTIONAL SPOT LIGHT
LI07
TRACK WITH PROJECTOR LIGHT
LI07A
TRACK WITH LED LINEAR LIGHT
LI07B
TRACK WITH LED LINEAR&PROJECTOR LIGHT
LI07C
TRACK WITH DIRECTIONAL PROJECTOR LIGHT
LI08
LINEAR LIGHT
LI09
PENDANT LIGHT
LI10
PENDANT LIGHT
LI11
PENDANT LIGHT
LI12
WALL MOUNTED DIRECTIONAL LIGHT
LI13
PENDANT LIGHT
LI02
LI14
CHANDELIERS
LI02
LI15
FLOOR LAMP
LI16
SCONCE
LI17
PENDANT LIGHT
LI18
SCONCE
LI19
WALL MOUNTED LIGHT
LI20
FLOOR LAMP
LI21
PENDANT LIGHT
LI03
LI03
LI04
DRIVER'S LI03 BATHROOM LI03
LI01
TV
LI04
UPPER AND LOWER LEVEL LIGHT REFER TO DETAILS
UPPER AND LOWER LEVEL LIGHT REFER TO DETAILS
LI02
LI03 DRIVER'S ROOM
UPPER AND LOWER LEVEL LIGHT REFER TO DETAILS
SYMBOL DESCRIPTION
LI02 GARDEN BATHROOM LI02
LI03
LI02 LI09
LI01 SHOW GARAGE
LI07 LI04
RAMP TO BASEMENT 32.00m SLOPE 10%
LI06 MAID'S ROOM LI03
LI06
LI06
F.C.L. -0.33 B.O.S. +0.02
ENTRANCE
LI06
LI03 UPPER AND LOWER LEVEL LIGHT REFER TO DETAILS
UPPER AND LOWER LEVEL LIGHT REFER TO DETAILS
LI01 LI07
F.C.L. -0.23 B.O.S. +0.02
SHISHALI06 LOUNGE
MAID'S BATHROOM
GENERAL NOTES:
LI03
LI06
LOBBY 01 LI04
LI04 STAIR 01 LI02 LI02
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
SUNKEN GARDEN
LI03
LI03
LI02 LI02
STAIR 02
LI07 KITCHEN LI06
LI03 LI05 UPPER AND LOWER LEVEL LIGHT REFER TO DETAILS
UPPER AND LOWER LEVEL LIGHT REFER TO DETAILS
SERVICE ENTRANCE
LI03
LI05
LI05
LI06
LI01
REVISION: 05
LI02 BATHROOM 01
LI02 LI02
04
LI02 LI03
02
LI09
LI03
LI01 ELEC.
03
LI03
LI06
LI01
NO. DESCRIPTION
LI06
LI03 LI06 SERVICE ENTRANCE
01
LI01
LI01
LI06 LI03
DATE
MR. MOHAMED FARUQE
LI01 OWNER
LI03
LOBBY 02
LI03 LAUNDRY
LI03 MECHANICAL
LI03
LI06
LOBBY 03
VILLA 123
LI01 PROJECT
LI03
LI07A
LI03
LI03
LI03
LI07B
GAMING OPEN ROOM
DUBAI LOCATION
LI03 CINEMA
PROJECTOR
CONCEPT DESIGN PHASE LI07B LI07A
LI03
LI03
LI03
LI03
SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
BAESMENT FLOOR LIGHTING PLAN
DRAWING TITLE
PUMP ROOM & BALANCETANK WATER TANK
JULY 2023
ISSUE DATE
LI03
LI03
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
1:50
Arch. DINA HADDADIN
PROJECT No
SHEET No
IP404
FOR TENDERING BBQ
LEGEND CODE
LI01
LI01 SHOW KITCHEN
LI01 LI07A
LI07B
OPEN TO ABOVE OPEN TO SKY LI02
LI02
LI02
LI02
LI02
LI02
LI02
LI02 LI02
LIVING ROOM LI02
LI02
LI02
LI02
LI07A
LI02
LI02
LI02
LI02 LI02
LOBBY 02
LI07B
LI01
LI01
LI08
TV
LI07A
LI01
n Sunke n e d r a G
LI13 LI01
DINING AREA
LI09
LI02
LI09
FAMILY BATHROOM LI02 LI02 LI02 LI02
SYMBOL DESCRIPTION
LI01
HIDDEN LIGHT
LI02
SPOT LIGHT
LI03
SPOT LIGHT
LI04
CEILING MOUNTED LINEAR LIGHT
LI05
PENDANT LIGHT
LI06
DIRECTIONAL SPOT LIGHT
LI07
TRACK WITH PROJECTOR LIGHT
LI07A
TRACK WITH LED LINEAR LIGHT
LI07B
TRACK WITH LED LINEAR&PROJECTOR LIGHT
LI07C
TRACK WITH DIRECTIONAL PROJECTOR LIGHT
LI08
LINEAR LIGHT
LI09
PENDANT LIGHT
LI10
PENDANT LIGHT
LI11
PENDANT LIGHT
LI12
WALL MOUNTED DIRECTIONAL LIGHT
LI13
PENDANT LIGHT
LI14
CHANDELIERS
LI15
FLOOR LAMP
LI16
SCONCE
LI17
PENDANT LIGHT
LI18
SCONCE
LI19
WALL MOUNTED LIGHT
LI20
FLOOR LAMP
LI21
PENDANT LIGHT
LI07C
LI02
LI02
BANQUETING AREA LI03
LI02
LI02
LI02 LI01 LI03
LI02 GUEST SUITE 01
LI02
LI02
LI02
LI01
STAIR 02
LI01
LI03
LI02
LI02 SHOWER OPEN TO ABOVE
LI07C
LOBBY 03
LI02
LI03 LI02 LI02 LI02 GUEST SUITE 01 BATHROOM LI02
OPEN TO SKY
DIRTY KITCHEN LI02 LI02
LI02 LI02
LI02
LI02
LI02 LI02
LI02 LI01
LI01 LI11
LI01
LI03 STAIR 01
LI02 LI02
LOBBY 01
LI02 LI02
REFLECTIVE POOL
LI07A
RAMP TO BASEMENT 32.00m SLOPE 10%
GUEST SUITE 02LI02 BATHROOM LI02
LI03
950x20cm
GENERAL NOTES:
LI11
LI01
LOBBY 04
LI01 LI02 LI02
LI02
LI02
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
LI02 LI02 LI02 LI02
LI07C
LI02 LI02
LI01
LI01
40x80cm 200x20cm
LI06
LI06
LI06
LI06
LI03
LI01
LI01
LI01 LI02
LI02
LI02
LI07C
LI02
WC LI02
LI02 LI02
SHOWER
SHOWER
LI02
LI01
LI01 LI02 LI02
PANTRY LI02 LI03
LI02 LI02 LI02 POWDER ROOM
FOYER LI07A
LI02
LI02 LI02 LI02 GUEST LI02 SUITE 03 BATHROOM LI02
LI10
GUEST SUITE 02 LI02 LI02
LI01 OPEN TO ABOVE
LI11
LI01
SIDE ENTRANCE
LI02 LI02
LI01
LI01 MAIN ENTRANCE
LI13
LI02 LI02
REVISION: 05
GUEST SUITE 03
04
LI12
REFLECTIVE POOL LI12
LI12
LI02 LI02
LI02 LI02
03
LI12 02
LI07C LI02 LI02
LI07C
LI01
LI01
01 NO. DESCRIPTION
DATE
MR. MOHAMED FARUQE
LI07C OWNER
LI07C
VILLA 123
LI13 PROJECT
DUBAI LOCATION
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE GARBAGE RM
CONSTRUCTION DRAWINGS PHASE ELECT. RM.
GROUND FLOOR LIGHTING PLAN
DRAWING TITLE
JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
Arch. DINA HADDADIN
LPG METER PAPER SIZE DRAWING SCALE
GATE LEVEL
A1
1:50
PROJECT No
SHEET No
IP405
FOR TENDERING EDGE OF CANOPY
EDGE OF CANOPY
LEGEND CODE
SEMI-COVERED BALCONY
LIMIT IF PERGOLA
TERRACE LI07A
LI02
LI02
LI02
LI02
LI02 LI20 LI02
LI02
LI02
LI02
LI02
LI02 LI15
FAMILY ROOM LI02
LI02 LI02
LI02
LI02
LI02
LI02
OPEN TO BELOW
LI01
OPEN TO SKY
LI16 LI21
MASTER BEDROOM 03 LI02
open to sky
LI02
LI02
LI02
LI02
LI02 LI19 LI01
LI02 LI02
LI12
LI07C LI07C
LI07C
LOBBY 01 LI02 LI02
LI02
LI01
HIDDEN LIGHT
LI02
SPOT LIGHT
LI03
SPOT LIGHT
LI04
CEILING MOUNTED LINEAR LIGHT
LI05
PENDANT LIGHT
LI06
DIRECTIONAL SPOT LIGHT
LI07
TRACK WITH PROJECTOR LIGHT
LI07A
TRACK WITH LED LINEAR LIGHT
LI07B
TRACK WITH LED LINEAR&PROJECTOR LIGHT
LI07C
TRACK WITH DIRECTIONAL PROJECTOR LIGHT
LI08
LINEAR LIGHT
LI09
PENDANT LIGHT
LI10
PENDANT LIGHT
LI11
PENDANT LIGHT
LI12
WALL MOUNTED DIRECTIONAL LIGHT
LI13
PENDANT LIGHT
LI14
CHANDELIERS
LI15
FLOOR LAMP
LI16
SCONCE
LI17
PENDANT LIGHT
LI18
SCONCE
LI19
SIDE TABLE PENDANT LIGHT
LI20
FLOOR LAMP
LI21
PENDANT LIGHT
LI22
SCONCE
LI02
LI02
LI02 GUEST SUITE 05
MASTER BEDROOM 03 BATHROOM LI07A
LI02
LI02
SYMBOL DESCRIPTION
LI01
LOBBY 03
LI02
LI02
LI07A LI02
LI01
LI02
LI02
LI02
LI07A
LI01 LI01
LI01
LI22
SHOWER LI02 LI02
LI02
LI02
LI02
LI02 LI02 SHOWER LI02
LI01
MASTER BEDROOM 03 DRESSING
LI22
LI02
GUEST SUITE 05 BATHROOM
LI02 WC LI02
LI07A
LI07C
LI01
OPEN TO BELOW
LI02
LI02
LI01
LI02
LOBBY 02
LI11
LI02 GENERAL NOTES:
LI02 LI02
STAIR 02
LI01
LI01
LI01
LI01
20
LI22
LI02
LI02 LI02
LI02 WC LI02
LI07C
60
LI07A
MASTER BEDROOM 02 DRESSING
LI01
LI07C
OPEN TO SKY
GUEST SUITE 04
LI14
LI01
LI02 LI02 SHOWER
LI02 LI02 LI01
LI02
LI02 SHOWER
LI02
LI02
LI02
LI02
LI11
LI02 LI02
LI01
LI07C LI19
GUEST SUITE 04 BATHROOM LI02 LI02
LI01 MASTER BEDROOM 02 BATHROOM
LI02
LI12 REVISION:
LI02 LI07A
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
WC
LI01
05
LOBBY 04 04
open to sky
LI07C
LI07C
LI01
OPEN TO BELOW LI02
LI02MASTER BEDROOM LI02 LI02 02
LI02
LI02 LI02 LI02 LI02 MASTER BEDROOM 01 BATHROOM
LI01 LI02 LI02
03 02
SHOWER
NO. DESCRIPTION
WC
LI02
01
LI18 LI14 LI07C LI02
LI02
LI02
LI02
LI02
MR. MOHAMED FARUQE
LI07C
OWNER
LI17
LI02
BATHTUB LI02 LI02
MASTER BEDROOM 01 DRESSING
LI20
LI02
LI02
LI02
VILLA 123
LI02
DUBAI
MASTER BEDROOM 01
LI02
EDGE OF CANOPY
LI02 PROJECT
LI02 OPEN TO SKY BALCONY
DATE
LI01
LI02
LOCATION
LI02
LI02
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE COVERED BALCONY
DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
FIRST FLOOR LIGHTING PLAN
DRAWING TITLE
JULY 2023
ISSUE DATE
EDGE OF CANOPY
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
1:50
Arch. DINA HADDADIN
PROJECT No
SHEET No
IP406
FOR TENDERING LEGEND CODE
CANOPY
FIRE PIT
OPEN TO SKY
ROOF LOUNGE
SYMBOL DESCRIPTION
LI01
HIDDEN LIGHT
LI02
SPOT LIGHT
LI03
SPOT LIGHT
LI04
CEILING MOUNTED LINEAR LIGHT
LI05
PENDANT LIGHT
LI06
DIRECTIONAL SPOT LIGHT
LI07
TRACK WITH PROJECTOR LIGHT
LI07A
TRACK WITH LED LINEAR LIGHT
LI07B
TRACK WITH LED LINEAR&PROJECTOR LIGHT
LI07C
TRACK WITH DIRECTIONAL PROJECTOR LIGHT
LI08
LINEAR LIGHT
LI09
PENDANT LIGHT
LI10
PENDANT LIGHT
LI11
PENDANT LIGHT
LI12
WALL MOUNTED DIRECTIONAL LIGHT
LI13
PENDANT LIGHT
LI14
CHANDELIERS
LI15
FLOOR LAMP
LI16
SCONCE
LI17
PENDANT LIGHT
LI18
SCONCE
LI19
WALL MOUNTED LIGHT
LI20
FLOOR LAMP
LI21
PENDANT LIGHT
JACUZZI
LI01 LI02 LI02
LI02 LI02
BATHROOM
SHOWER
LI02 LI02
LI01
LI01
LI01
BBQ AREA GENERAL NOTES:
LI07A
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
LOBBY 01 LI07A
SERVICE AREA
OPEN TO SKY
REVISION:
LI07A
05 04 03 02 01 NO. DESCRIPTION
DATE
MR. MOHAMED FARUQE OWNER
SERVICE AREA
VILLA 123 PROJECT
DUBAI LOCATION
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
ROOF FLOOR LIGHTING PLAN
DRAWING TITLE
JULY 2023
ISSUE DATE
ENTRY FRAME DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
Arch. DINA HADDADIN
CANOPY
PAPER SIZE DRAWING SCALE
A1
1:50
PROJECT No
SHEET No
IP407
FOR TENDERING
PUMPROOM & BALANCE TANK
DRIVER'S BATHROOM
TV
F.C.L. -0.23 B.O.S. +0.02 DRIVER'S ROOM GARDEN BATHROOM LINTEL -0.88
SHOW GARAGE
RAMP TO BASEMENT 32.00m SLOPE 10% EXPOSED CEILING B.O.S. +0.02
MAID'S ROOM
ENTRANCE
F.C.L. -0.33 B.O.S. +0.02 EXPOSED CEILING B.O.S. +0.02
F.C.L. -0.23 B.O.S. +0.02
SHISHA LOUNGE
MAID'S BATHROOM
GENERAL NOTES:
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
SUNKEN GARDEN
LOBBY 01 STAIR 01
STAIR 02 KITCHEN
SERVICE ENTRANCE
F.C.L. -0.23 B.O.S. +0.02
REVISION: 05
BATHROOM 01 F.C.L. -0.33 B.O.S. +0.02
04 03 02 01
LINTEL -0.88
NO. DESCRIPTION
ELEC. SERVICE ENTRANCE
DATE
MR. MOHAMED FARUQE OWNER
LOBBY 02 LAUNDRY
MECHANICAL
VILLA 123
LOBBY 03
PROJECT
GAMING OPEN ROOM
DUBAI LOCATION
CINEMA PROJECTOR PROVISION PROJECTOR PROJECTOR PROVISION WALL T.V&DATA OUTLET
CEILING T.V&DATA OUTLET
Y DUMM
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
BAESMENT FLOOR HVAC PLAN
DRAWING TITLE
PUMP ROOM & BALANCETANK WATER TANK
JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
1:50
Arch. DINA HADDADIN
PROJECT No
SHEET No
IP408
GARBAGE RM
COUNTER
FOR TENDERING BBQ
SHOW KITCHEN
DUMMY
OPEN TO ABOVE OPEN TO SKY
LIVING ROOM
Y DUMM LOBBY 02
TV
n Sunke n e d r Ga
DINING AREA
Y DUMM
FAMILY BATHROOM
BANQUETING AREA
GUEST SUITE 01
DUMM
STAIR 02
Y
SHOWER OPEN TO ABOVE
GUEST SUITE 01 BATHROOM
OPEN TO SKY
DIRTY KITCHEN
STAIR 01
LOBBY 03
GUEST SUITE 02 BATHROOM
LOBBY 01
REFLECTIVE POOL
LOBBY 04
RAMP TO BASEMENT 32.00m
950x20cm
SLOPE 10%
40x80cm 200x20cm
WC SHOWER
SHOWER
PANTRY POWDER ROOM
FOYER
GUEST SUITE 03 BATHROOM
GUEST SUITE 02
Y
OPEN TO ABOVE
DUMM
GENERAL NOTES:
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations. REVISION: 05
SIDE ENTRANCE
Y DUMM MAIN ENTRANCE REFLECTIVE POOL
GUEST SUITE 03
04 03 02 01 NO. DESCRIPTION
DATE
MR. MOHAMED FARUQE OWNER
VILLA 123 PROJECT
DUBAI LOCATION
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
ELECT. RM.
GROUND FLOOR LIGHTING PLAN
DRAWING TITLE
JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
LPG METER
A1 GATE LEVEL
1:50
Arch. DINA HADDADIN
PROJECT No
SHEET No
IP409
EDGE OF CANOPY
EDGE OF CANOPY
FOR TENDERING SEMI-COVERED BALCONY
F.F.L. +4.80
LIMIT IF PERGOLA
TERRACE
DUMMY
FAMILY ROOM F.F.L. +4.85
Y
DUMM
OPEN TO BELOW OPEN TO SKY MASTER BEDROOM 03
open to sky
F.F.L. +4.85
LOBBY 01 GUEST SUITE 05
MASTER BEDROOM 03 BATHROOM F.F.L. +4.85
F.F.L. +4.85
LOBBY 03
F.F.L. +4.85
F.F.L. +4.85
SHOWER F.F.L. +4.85
SHOWER F.F.L. +4.85
MASTER BEDROOM 03 DRESSING F.F.L. +4.85
GUEST SUITE 05 BATHROOM OPEN TO BELOW
WC
LOBBY 02 STAIR 02
WC
OPEN TO SKY GENERAL NOTES:
MASTER BEDROOM 02 DRESSING
60
20
GUEST SUITE 04
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
F.F.L. +4.85 F.F.L. +4.85
SHOWER SHOWER
F.F.L. +4.85 F.F.L. +4.85 GUEST SUITE 04 BATHROOM
MASTER BEDROOM 02 BATHROOM
F.F.L. +4.85 WC
F.F.L. +4.85 LOBBY 04
F.F.L. +4.85 open to sky
MASTER BEDROOM 01 BATHROOM
REVISION:
SHOWER
OPEN TO BELOW WC
MASTER BEDROOM 02
05 04 03
F.F.L. +4.85
02
BATHTUB
01 NO. DESCRIPTION
MASTER BEDROOM 01 DRESSING
MASTER BEDROOM 01
DATE
MR. MOHAMED FARUQE OWNER
F.F.L. +4.85
VILLA 123
OPEN TO SKY BALCONY PROJECT
EDGE OF CANOPY
DUBAI LOCATION
COVERED BALCONY
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE EDGE OF CANOPY
FIRST FLOOR LIGHTING PLAN
DRAWING TITLE
JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
1:50
Arch. DINA HADDADIN
PROJECT No
SHEET No
IP410
FOR TENDERING CANOPY
FIRE PIT
F.F.L. +8.60 OPEN TO SKY
ROOF LOUNGE F.F.L. +9.20
JACUZZI
F.F.L. +8.90
SHOWER
BATHROOM F.F.L. +8.65
BBQ AREA
GENERAL NOTES:
LOBBY 01
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
SERVICE AREA
F.F.L. +8.60
OPEN TO SKY F.F.L. +8.60 F.F.L. +8.65
REVISION: 05 04 03 02 01 NO. DESCRIPTION
F.F.L. +8.60
SERVICE AREA
DATE
MR. MOHAMED FARUQE OWNER
VILLA 123 PROJECT
DUBAI LOCATION
CONCEPT DESIGN PHASE F.F.L. +9.45
SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
ROOF FLOOR HVAC PLAN
DRAWING TITLE
ENTRY FRAME
JULY 2023
ISSUE DATE
F.F.L. +8.25
CANOPY
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
1:50
Arch. DINA HADDADIN
PROJECT No
SHEET No
IP411
FOR TENDERING LEGEND CODE HATCH
DESCRIPTION
TL-01
LEA CERAMICHE-BIOSELECT - OAK VANILLA 20*120cm NAT.
TL-02
LEA CERAMICHE-MASTERPIECE MASTER WHITE 120*120CM NAT. LEA CERAMICHE-SLIMTECH DELIGHT CALACATA ORO 120*120CM POLISHED. LEA CERAMICHE-SLIMTECH DELIGHT CALACATA ORO 120*120CM POLISHED STAIRS.
TL-03 F.F.L. -3.25
PUMPROOM & BALANCE TANK UL F.F.L. -3.30
UL
TL-08
FD02 FD02
F.F.L. -3.25 TL-05
FD02
FD20
TL-04
DESVRES ARIANA-DORICA AVORIO 120*280cm NAT.
TL-05
60*60CM TILES
TL-06
30*120CM TILES TO MATCH (TL-05)
TL-07
PEBBLES
TL-08
SCREED WITH EPOXY FINISH
TS
TRANSITION STRIP
FD02
UPLIGHT
UL
DRIVER'S BATHROOM
F.F.L. -3.30 UL
TL-08
TV
FD02
FD05
UL
FD02
SP
FD20 FD19
FD19
FD02 F.F.L. -3.25
TS
DRIVER'S ROOM TL-05 F.F.L. -3.25 FD19
FD19
FD19
GARDEN TL-04 BATHROOM FD04
FD19
TS FD05
FD19
FD19
FD05 FD20
SP
F.F.L. -3.30 TL-08
FD20
FD05 FD05
RAMP TO BASEMENT 32.00m SLOPE 10%
FD05
SHOW GARAGE
SP
FD01
TL-02 MAID'S ROOM
FD05
UL
UL
UL
TL-02
UL
FD08
FD19
FD05
F.F.L. -3.09
SP FD19
F.F.L. -3.25
FD19
FD19
FD19
F.F.L. -3.38
FD05
FD19
FD19
TL-07
FD02
FD02
F.F.L. -3.25
ENTRANCE FD19
F.F.L. -3.25 TL-05
CHANGE EXTERIOR TILE SIZE TO BE 1.20*1.20M
TS
F.F.L. -3.25
MAID'S BATHROOM
FD12
FD09
FD02
FD19 FD05
FD05
SP
LOBBY 01 UL
UL
GENERAL NOTES:
SUNKEN GARDEN
TL-02
UL
FD08
FD10
F.F.L. -3.25
FD20
F.F.L. -3.25 TL-05
STAIR 01
SHISHA LOUNGE
F.F.L. -3.38
FD05
FD05
TL-07
FD19
F.F.L. -2.17 TL-06
FD19
F.F.L. -3.30 STAIR 02
FD19
FD05
TL-05
KITCHEN UL
F.F.L. -3.25 F.F.L. -3.25 TL-02
FD20
F.F.L. -3.30
FD02
FD04
03
F.F.L. -3.25
F.F.L. -3.25
TL-04
TL-02
TL-05 SP
FD05
MR. MOHAMED FARUQE FD09
F.F.L. -3.25 FD09
MECHANICAL
LOBBY 03
F.F.L. -3.25 TL-05
TL-05 F.F.L. -3.25
SP
DUBAI LOCATION
FD05 F.F.L. -3.25
F.F.L. -3.70
CONCEPT DESIGN PHASE
TL-01
SCHEMATIC DESIGN PHASE FD05
FD05
FD05
TL-05
FD09
CINEMA
PROJECTOR FD05
DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
FD05
FD05
TL-05
BAESMENT FLOOR FLOORING PLAN
DRAWING TITLE
PUMP ROOM & BALANCETANK WATER TANK
F.F.L. -3.25
ISSUE DATE
FD05
FD05
PROJECT
FD05
FD05
FD05
VILLA 123
TL-02 GAMING OPEN ROOM
FD05 TL-05
FD05
FD05
LAUNDRY
DATE
OWNER
LOBBY 02
FD05
NO. DESCRIPTION
TL-05 F.F.L. -3.25
F.F.L. -3.25 F.F.L. -3.25
01
FD05
SERVICE ENTRANCE
02
TS
FD05
ELEC.
04
FD10
F.F.L. -3.25
05
BATHROOM 01 FD02
FD05
FD05
FD05
FD05
F.F.L. -3.25
REVISION:
FD10
FD09
FD05
TL-08
SERVICE ENTRANCE
FD05
FD02
FD05
FD20
FD20
FD05
F.F.L. -3.25
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
DRAWN BY:
JULY 2023
DESIGNED BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
1:50
Arch. DINA HADDADIN
PROJECT No
SHEET No
IP500
COUNTER
FOR TENDERING LEGEND
BBQ F.F.L. -3.20
CODE HATCH
DESCRIPTION
TL-01
LEA CERAMICHE-BIOSELECT - OAK VANILLA 20*120cm NAT.
TL-02
LEA CERAMICHE-MASTERPIECE MASTER WHITE 120*120CM NAT. LEA CERAMICHE-SLIMTECH DELIGHT CALACATA ORO 120*120CM POLISHED. LEA CERAMICHE-SLIMTECH DELIGHT CALACATA ORO 120*120CM POLISHED STAIRS.
TL-03 -
SHOW KITCHEN
FD10
FD10
FD10
FD10
FD15
FD10
F.F.L. -0.20
SP
F.F.L. +0.45 TL-03
F.F.L. -2.59
OPEN TO ABOVE
TL-04
DESVRES ARIANA-DORICA AVORIO 120*120cm NAT.
TL-05
60*60CM TILES
TL-06
30*120CM TILES TO MATCH (TL-05)
TL-07
PEBBLES
TL-08
SCREED WITH EPOXY FINISH
TL-09
DESVRES ARIANA-DORICA GREIGE 120*120cm NAT.
TS
TRANSITION STRIP
OPEN TO SKY
FD05
FD10 FD10
LIVING ROOM
UPLIGHT
UL
FD05
F.F.L. +0.45 TL-03
FD07
FD17
FD10
F.F.L. +0.45 TL-03
LOBBY 02 F.F.L. +0.607 TV
FD07 FD10
FD02
FD02
FD02
FD07
FD07
DINING AREA
FD05
FAMILY BATHROOM F.F.L. +0.45
F.F.L. +0.40
n Sunke n e d r Ga
SP BANQUETING AREA F.F.L. +0.45 TL-03
TL-04
FD05
TS
SP
FD10
FD03
FD09
GUEST SUITE 01 F.F.L. +0.45 TL-01
FD04 FD16 STAIR 02
FD05
FD02 SP
FD02
FD10
SHOWER
SP
OPEN TO ABOVE
LOBBY 03
TS
GUEST SUITE 01 BATHROOM TL-09
FD05 FD02
FD09 REFLECTIVE POOL
LOBBY 04
RAMP TO BASEMENT 32.00m
FD07
FD10
950x20cm
TS
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
SP
F.F.L. +0.45 TL-09
FD02
FD07
FD07
F.F.L. +0.45 TL-03
FD07
FD03
GENERAL NOTES:
GUEST SUITE 02 BATHROOM
LOBBY 01 F.F.L. +0.45 TL-03
FD05
TS
FD05
STAIR 01 FD03
SP
TS
FD02
OPEN TO SKY
FD07
DIRTY KITCHEN
F.F.L. -3.20
FD02
FD07
F.F.L. +0.45
FD02
TS
SLOPE 10%
FD02 PANTRY
UL TL-09
FOYER
SP
OPEN TO ABOVE
TL-09
FD05
TS
FD05
GUEST SUITE 02 F.F.L. +0.45
FD07
TL-01
FD05
REVISION: 05 04
FD05
FD10
FD02
SP
SHOWER
SP
GUEST SUITE 03 BATHROOM F.F.L. +0.45
FD03 FD03
SHOWER TL-09
FD02
SIDE ENTRANCE F.F.L. +0.40
FD07
MAIN ENTRANCE
03
GUEST SUITE 03 F.F.L. +0.45 TL-01
REFLECTIVE POOL
02
FD07
01
FD07
FD07
FD07
FD05
FD10
FD02
FD10
F.F.L. +0.40
NO. DESCRIPTION
FD05
F.F.L. +0.45 TL-06 TS
UL FD02 F.F.L. +0.45 TL-04 SP POWDER ROOM
UL UL F.F.L. +0.45 TL-03
FD05 FD02
UL
FD02
FD05 FD07
FD02
FD02
FD07
FD02
FD02
TL-05 FD03
WC FD02
FD02
F.F.L. +0.45 UL
TS
FD05
TS
FD02
40x80cm 200x20cm
DATE
MR. MOHAMED FARUQE OWNER
VILLA 123 PROJECT
DUBAI LOCATION
F.F.L. -0.20
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
GARBAGE RM
ELECT. RM.
F.F.L. +7.66 F.F.L. +7.66
GROUND FLOOR FLOORING PLAN
DRAWING TITLE
JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1 LPG METER
1:50
Arch. DINA HADDADIN
PROJECT No
SHEET No
IP501
FOR TENDERING EDGE OF CANOPY
EDGE OF CANOPY
LEGEND
SEMI-COVERED BALCONY
CODE HATCH
DESCRIPTION
TL-01
LEA CERAMICHE-BIOSELECT - OAK VANILLA 20*120cm NAT.
TL-02
LEA CERAMICHE-MASTERPIECE MASTER WHITE 120*120CM NAT. LEA CERAMICHE-SLIMTECH DELIGHT CALACATA ORO 120*120CM POLISHED. LEA CERAMICHE-SLIMTECH DELIGHT CALACATA ORO 120*120CM POLISHED STAIRS.
TL-03
F.F.L. +4.80
-
FD10
TERRACE
FD10
FD10
LIMIT IF PERGOLA
FD10
FD10
FD07
FAMILY ROOM
TL-04
DESVRES ARIANA-DORICA AVORIO 120*120cm NAT.
TL-05
60*60CM TILES
TL-06
30*120CM TILES TO MATCH (TL-05)
TL-07
PEBBLES
TL-08
SCREED WITH EPOXY FINISH
TL-09
DESVRES ARIANA-DORICA GREIGE 120*120cm NAT.
TS
TRANSITION STRIP UPLIGHT
UL
F.F.L. +4.85 TL-01
SP
FD07
OPEN TO BELOW
FD10 OPEN TO SKY
open to sky
F.F.L. +4.85 TL-01
FD07
MASTER BEDROOM 03
SP
FD14 FD05
FD07
FD10
LOBBY 01 TS
F.F.L. +4.85 TL-01
F.F.L. +4.85 TL-01
FD02
FD06
LOBBY 03
FD05
F.F.L. +4.85 TL-01
FD10
FD05
GUEST SUITE 05
MASTER BEDROOM 03 BATHROOM
F.F.L. +4.85
FD05
SP
FD10
FD05 TS
FD06
FD02
FD02 TL-04
FD05 MASTER FD05 BEDROOM 03 DRESSING
TS
FD02 FD04
LOBBY 02 STAIR 02
FD05
FD05
FD02 OPEN TO SKY
FD02
FD05 MASTER BEDROOM FD05 02 DRESSING
GUEST SUITE 04 TS
FD05 F.F.L. +4.85 TL-01
TS
FD05 F.F.L. +4.85 TL-01
FD02 TS
MASTER BEDROOM 02 BATHROOM
TS F.F.L. +4.85 TL-01
LOBBY 04
FD02
FD10
F.F.L. +4.85 TL-03
WC
FD02 FD05 F.F.L. +4.85 TL-09 GUEST SUITE 04 BATHROOM
TS
FD10
SP
F.F.L. +4.85 TL-01
REVISION:
04
FD05
FD02
OPEN TO BELOW
03 02
SHOWER
01
TL-04 WC
MASTER BEDROOM 02
TL-04
FD05
FD07
FD07
FD07
FD13
NO. DESCRIPTION
BATHTUB
DATE
MR. MOHAMED FARUQE OWNER
FD05
VILLA 123 MASTER BEDROOM 01 DRESSING
FD05
OPEN TO SKY BALCONY
PROJECT
MASTER BEDROOM 01 F.F.L. +4.85 TL-01
FD10
FD10
F.F.L. +4.85 TL-01
MASTER BEDROOM 01 BATHROOM SP
FD02
FD06
SP
05
FD02
SP
FD10
FD02
DUBAI LOCATION
EDGE OF CANOPY
FD10
open to sky
FD10
FD07
SHOWER
FD02
FD02
FD06
FD06
FD05
SP
FD02
SP
SHOWER
FD02
FD02 FD02
TL-04 SP
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
FD10
F.F.L. +4.85 TL-01
FD02
GENERAL NOTES:
FD10
TL-04 WC
FD02
TS
SP
FD07
FD04 SP
GUEST SUITE 05 BATHROOM OPEN TO BELOW
FD05
FD02
WC TL-04
SP
F.F.L. +4.85 TL-09
SP
F.F.L. +4.85
FD02
FD02
FD06
SHOWER
FD02
FD02
FD05
F.F.L. +4.85 TL-03
FD02
FD02
SP
FD02
FD05
SHOWER
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE COVERED BALCONY
DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
FIRST FLOOR FLOORING PLAN
DRAWING TITLE
EDGE OF CANOPY
JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
1:50
Arch. DINA HADDADIN
PROJECT No
SHEET No
IP502
FOR TENDERING LEGEND
CANOPY
CODE HATCH
DESCRIPTION
TL-01
LEA CERAMICHE-BIOSELECT - OAK VANILLA 20*120cm NAT.
TL-02
LEA CERAMICHE-MASTERPIECE MASTER WHITE 120*120CM NAT. LEA CERAMICHE-SLIMTECH DELIGHT CALACATA ORO 120*120CM POLISHED. LEA CERAMICHE-SLIMTECH DELIGHT CALACATA ORO 120*120CM POLISHED STAIRS.
TL-03 -
FIRE PIT
TL-04
DESVRES ARIANA-DORICA AVORIO 120*280cm NAT.
TL-05
60*60CM TILES
TL-06
30*120CM TILES TO MATCH (TL-05)
TL-07
PEBBLES
TL-08
SCREED WITH EPOXY FINISH
TS
TRANSITION STRIP UPLIGHT
UL
F.F.L. +8.60 OPEN TO SKY
ROOF LOUNGE F.F.L. +9.20
JACUZZI
F.F.L. +8.90
SHOWER
BATHROOM F.F.L. +8.65 TL-04 SP
BBQ AREA
SP
GENERAL NOTES:
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
LOBBY 01
SERVICE AREA
F.F.L. +8.60
OPEN TO SKY F.F.L. +8.60 F.F.L. +8.65 TL-03
REVISION: 05 04 03 02 01 NO. DESCRIPTION
DATE
MR. MOHAMED FARUQE OWNER
F.F.L. +8.60
SERVICE AREA
VILLA 123 PROJECT
DUBAI LOCATION
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE F.F.L. +9.45
DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
ROOF FLOOR FLOORING PLAN
DRAWING TITLE
JULY 2023
ISSUE DATE
ENTRY FRAME
F.F.L. +8.25
CANOPY
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
1:50
Arch. DINA HADDADIN
PROJECT No
SHEET No
IP503
FOR TENDERING WALL FINISHES LEGEND
02 08
08
08
PUMPROOM & BALANCE TANK 02
02
02
08 16
16 16 DRIVER'S BATHROOM
02 TV
16
08
08 20
20 01
DRIVER'S ROOM 20 20
20
02
08
GARDEN BATHROOM
02
20 08
08
20
20
CODE
DESCRIPTION
01
SENSI-UP-MARQUINIA SELECT(120*278 CM )
02
PAINT FINISH
02A
PAINT FINISH ON GYPSUM BOARD
03
ALUMINUM FINISH ON MDF SHELF
04
WOOD FINISH
05
LEA CERAMICHE-MASTERPIECE MASTER WHITE 120*120CM NAT.
06
CURTAINS
07
HPL LOUVERS
08
DORICA AVORIO (120*280 CM )
09
MIRROR
10
STONE TO MATCH EXTERIOR STONE
11
CURVED LAMINATE VENEER AS PER APPROVED SAMPLE
12
ABK-SENSI-SIGNORIA-CALACATTA- VENA-ORO 120*280
13
PAINTED WOOD FINISH
14
WOOD FINISH/ KITCHEN CABINETS
15
DARK TINTED GLASS /GLASS DOOR CABINET
16
60*60 CM TILES
18
DORICA GREIGE TILE (120x280)
19
LAMINATE WOOD TYPE 1
20
WOOD VENEER TO MATCH DOORS FINISH
21
HDF WOOD CLADDING PUTTIED AND PAINTED WITH TEXTURED PAIN AS SPECIFIED TYPE 1
22
HDF WOOD CLADDING PUTTIED AND PAINTED WITH TEXTURED PAIN AS SPECIFIED TYPE 2
23
LAMINATE WOOD TO MATCH DOORS FINISH
24
ROTATING VENEER WOOD PANELS
25
CLEAR GLASS
26
OPAQUE GLASS
27
LAMINATE WOOD TYPE 2
28
FLUTED WOOD PANELS
29
PAINTED IN BRASS FINISH -METAL INLAY
30
WOOD VENEER TYPE 2
08 02
08 SHOW GARAGE
02
08 RAMP TO BASEMENT 32.00m SLOPE 10%
02
MAID'S ROOM
ENTRANCE
02 20
20
02
02 20
20
20
20
02
16 16 MAID'S BATHROOM 16
20
20
SHISHA LOUNGE
02
01
GENERAL NOTES:
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
02 01
SUNKEN GARDEN
16 02
STAIR 01
20
LOBBY 01 02
02 02
20
03
20 02
02
STAIR 02 02
20
02
KITCHEN
08 16
08 02
08
08
01 REVISION:
SERVICE ENTRANCE 01 BATHROOM 01 08 08
02 02
02
04 03 02
02
02
05
08
01 NO. DESCRIPTION
ELEC.
02
02
SERVICE ENTRANCE
05
20 20 02
DATE
MR. MOHAMED FARUQE OWNER
LOBBY 02 LAUNDRY LOBBY 03 02
MECHANICAL
VILLA 123
05
PROJECT
02
02
GAMING OPEN ROOM
02 02
DUBAI LOCATION
02
02
02 02
CINEMA 02
CONCEPT DESIGN PHASE
PROJECTOR
SCHEMATIC DESIGN PHASE 02
02
02
02
02
02
CONSTRUCTION DRAWINGS PHASE
02 PUMP ROOM & BALANCETANK WATER TANK
DESIGN DEVELOPMENT PHASE
BAESMENT FLOOR WALL FINISHES PLAN
DRAWING TITLE
02
JULY 2023
ISSUE DATE
02
02
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
1:50
Arch. DINA HADDADIN
PROJECT No
SHEET No
IP600
COUNTER
FOR TENDERING BBQ
WALL FINISHES LEGEND CODE
SHOW KITCHEN
11
11
11
OPEN TO ABOVE
OPEN TO SKY 02
LIVING ROOM
02 02 LOBBY 02 20
29
08
TV
n Sunke n e Gard
DINING AREA
08
09 08 FAMILY BATHROOM
08
02
02
01
02
12
08
20 23
02
23
01
20
23
08
23
08
01
08
02
BANQUETING AREA 20
08
08
09 GUEST SUITE 01
02
16
18
20 OPEN TO ABOVE
02
20
18
STAIR 02
LOBBY 03
20
DIRTY KITCHEN
02
02A
PAINT FINISH ON GYPSUM BOARD
03
ALUMINUM FINISH ON MDF SHELF
04
WOOD FINISH
05
LEA CERAMICHE-MASTERPIECE MASTER WHITE 120*120CM NAT.
06
CURTAINS
07
HPL LOUVERS
08
DORICA AVORIO (120*280 CM )
09
MIRROR
10
STONE TO MATCH EXTERIOR STONE
11
CURVED LAMINATE VENEER AS PER APPROVED SAMPLE
12
ABK-SENSI-SIGNORIA-CALACATTA- VENA-ORO 120*280
13
PAINTED WOOD FINISH
14
WOOD FINISH/ KITCHEN CABINETS
15
DARK TINTED GLASS /GLASS DOOR CABINET
16
60*60 CM TILES
18
DORICA GREIGE TILE (120x280)
19
LAMINATE WOOD TYPE 1
20
WOOD VENEER TO MATCH DOORS FINISH
21
HDF WOOD CLADDING PUTTIED AND PAINTED WITH TEXTURED PAIN AS SPECIFIED TYPE 1
22
HDF WOOD CLADDING PUTTIED AND PAINTED WITH TEXTURED PAIN AS SPECIFIED TYPE 2
23
LAMINATE WOOD TO MATCH DOORS FINISH
24
ROTATING VENEER WOOD PANELS
25
CLEAR GLASS
26
OPAQUE GLASS
27
LAMINATE WOOD TYPE 2
28
FLUTED WOOD PANELS
29
PAINTED IN BRASS FINISH -METAL INLAY
30
WOOD VENEER TYPE 2
20
20 20
23
20
GUEST SUITE 01 BATHROOM 09
02
PAINT FINISH
20
20 OPEN TO SKY
SENSI-UP-MARQUINIA SELECT(120*278 CM )
02
02
18 SHOWER
11
DESCRIPTION
01
02 23
09
20 18 01
18
01 STAIR 01
16
LOBBY 01
18
09
REFLECTIVE POOL
01
02 16
20
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
18
LOBBY 04 01
20 RAMP TO BASEMENT 32.00m
20
02
GENERAL NOTES:
GUEST SUITE 02 BATHROOM 18 18 18
20 09
950x20cm
18 20
20
SLOPE 10%
02
40x80cm 200x20cm
12
12
12
18
12
08
01
01
02
18
WC 18
20
18
18
18
18 18 SHOWER
18 18
01
02
18
20
02
02
18 18 SHOWER
20 PANTRY
08
01
POWDER ROOM
16
09
08
FOYER 11
09
18 GUEST SUITE 03 BATHROOM
02 GUEST SUITE 02 18 18
08
08
09
18 OPEN TO ABOVE
02
18
REVISION:
28 SIDE ENTRANCE 02 MAIN ENTRANCE
23
18
04 03
23
GUEST SUITE 03
05
02
REFLECTIVE POOL
23
01 NO. DESCRIPTION
12 02
09
MR. MOHAMED FARUQE 02
12
09
DATE
OWNER
02
02
VILLA 123 PROJECT
23
DUBAI LOCATION
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
GROUND FLOOR WALL FINISHES PLAN
DRAWING TITLE
JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1 GATE LEVEL
1:50
Arch. DINA HADDADIN
PROJECT No
SHEET No
IP601
FOR TENDERING EDGE OF CANOPY
EDGE OF CANOPY
SEMI-COVERED BALCONY
WALL FINISHES LEGEND LIMIT IF PERGOLA
TERRACE
11
11
11
OPEN TO BELOW
OPEN TO SKY
02A 22
MASTER BEDROOM 03
open to sky 24
24
24
24
20
LEA CERAMICHE-MASTERPIECE MASTER WHITE 120*120CM NAT.
06
CURTAINS
07
HPL LOUVERS
08
DORICA AVORIO (120*280 CM )
09
MIRROR
10
STONE TO MATCH EXTERIOR STONE
11
CURVED LAMINATE VENEER AS PER APPROVED SAMPLE
12
ABK-SENSI-SIGNORIA-CALACATTA- VENA-ORO 120*280
13
PAINTED WOOD FINISH
14
WOOD FINISH/ KITCHEN CABINETS
15
DARK TINTED GLASS /GLASS DOOR CABINET
16
60*60 CM TILES
18
DORICA GREIGE TILE (120x280)
19
LAMINATE WOOD TYPE 1
20
WOOD VENEER TO MATCH DOORS FINISH
21
HDF WOOD CLADDING PUTTIED AND PAINTED WITH TEXTURED PAIN AS SPECIFIED TYPE 1
22
HDF WOOD CLADDING PUTTIED AND PAINTED WITH TEXTURED PAIN AS SPECIFIED TYPE 2
23
LAMINATE WOOD TO MATCH DOORS FINISH
24
ROTATING VENEER WOOD PANELS
25
CLEAR GLASS
LOBBY 01 28 23
02A MASTER BEDROOM 03 BATHROOM LOBBY 03
02
GUEST SUITE 05
01
02
26
OPAQUE GLASS
27
LAMINATE WOOD TYPE 2
28
FLUTED WOOD PANELS
29
PAINTED IN BRASS FINISH -METAL INLAY
30
WOOD VENEER TYPE 2
02
02
08
PAINT FINISH ON GYPSUM BOARD
05
09
02
PAINT FINISH
02A
ALUMINUM FINISH ON MDF SHELF
28 24
02
WOOD FINISH
02
24
SENSI-UP-MARQUINIA SELECT(120*278 CM )
04
02 28
20
DESCRIPTION
03
23
FAMILY ROOM
CODE 01
02
08 08 SHOWER 08
08
08
02
02
18 18
02
08
18
SHOWER
MASTER BEDROOM 03 DRESSING
09
02
08 WC
OPEN TO BELOW
08
01
GUEST SUITE 05 BATHROOM
02 02
09
09
08
01
08
LOBBY 02
18
STAIR 02
18
23 30
11 08 09
09
WC
08
08
OPEN TO SKY MASTER BEDROOM 02 DRESSING
08
02
02
GUEST SUITE 04 02
02
02 09
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
09
02 08
GENERAL NOTES:
02
02
02
18
09
02
08 08
18
SHOWER 08 08
18
18 SHOWER 18
01
18 08
02 18
18
GUEST SUITE 04 BATHROOM 18
02
open to sky
24
24
24
24
05 04
18 18 WC LOBBY 04 24
02
20
REVISION:
28 12
18
09
MASTER BEDROOM 02 BATHROOM
24
02
18
02
20
02
09
18
01
03
01 09
02
02
01 01
20
02 MASTER BEDROOM 02
NO. DESCRIPTION
MASTER BEDROOM 01 BATHROOM
30
01
OPEN TO BELOW
02
30
02
DATE
SHOWER
01
01
11
01
01
MR. MOHAMED FARUQE
WC OWNER
30
20 30
02
VILLA 123
30
PROJECT
BATHTUB 01
09
DUBAI
02 MASTER BEDROOM 01 DRESSING
02
LOCATION
01 MASTER BEDROOM 01
01
01
CONCEPT DESIGN PHASE
OPEN TO SKY BALCONY
SCHEMATIC DESIGN PHASE EDGE OF CANOPY
DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE COVERED BALCONY
FIRST FLOOR WALL FINISHES PLAN
DRAWING TITLE
JULY 2023
ISSUE DATE
EDGE OF CANOPY
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
1:50
Arch. DINA HADDADIN
PROJECT No
SHEET No
IP602
FOR TENDERING CANOPY
WALL FINISHES LEGEND CODE
FIRE PIT
OPEN TO SKY
ROOF LOUNGE
JACUZZI
01
DESCRIPTION SENSI-UP-MARQUINIA SELECT(120*278 CM )
02
PAINT FINISH
02A
PAINT FINISH ON GYPSUM BOARD
03
ALUMINUM FINISH ON MDF SHELF
04
WOOD FINISH
05
LEA CERAMICHE-MASTERPIECE MASTER WHITE 120*120CM NAT.
06
CURTAINS
07
HPL LOUVERS
08
DORICA AVORIO (120*280 CM )
09
MIRROR
10
STONE TO MATCH EXTERIOR STONE
11
CURVED LAMINATE VENEER AS PER APPROVED SAMPLE
12
ABK-SENSI-SIGNORIA-CALACATTA- VENA-ORO 120*280
13
PAINTED WOOD FINISH
14
WOOD FINISH/ KITCHEN CABINETS
15
DARK TINTED GLASS /GLASS DOOR CABINET
16
60*60 CM TILES
18
DORICA GREIGE TILE (120x280)
19
LAMINATE WOOD TYPE 1
20
WOOD VENEER TO MATCH DOORS FINISH
21
HDF WOOD CLADDING PUTTIED AND PAINTED WITH TEXTURED PAIN AS SPECIFIED TYPE 1
22
HDF WOOD CLADDING PUTTIED AND PAINTED WITH TEXTURED PAIN AS SPECIFIED TYPE 2
23
LAMINATE WOOD TO MATCH DOORS FINISH
24
ROTATING VENEER WOOD PANELS
25
CLEAR GLASS
26
OPAQUE GLASS
27
LAMINATE WOOD TYPE 2
28
FLUTED WOOD PANELS
29
PAINTED IN BRASS FINISH -METAL INLAY
30
WOOD VENEER TYPE 2
08
01
08
01 01 SHOWER
BATHROOM 09 01
02 08 BBQ AREA 02 02
01 LOBBY 01 GENERAL NOTES:
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
02 SERVICE AREA
OPEN TO SKY 01
02
REVISION: 05 04 03 02 01 NO. DESCRIPTION
DATE
SERVICE AREA
MR. MOHAMED FARUQE OWNER
VILLA 123 PROJECT
DUBAI LOCATION
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
ROOF FLOOR WALL FINISHES PLAN
DRAWING TITLE
ENTRY FRAME
JULY 2023
ISSUE DATE
CANOPY DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
1:50
Arch. DINA HADDADIN
PROJECT No
SHEET No
IP603
FOR TENDERING
WD01 IH100
F.F.L. -3.25 PUMPROOM & BALANCE TANK B1
10
F.F.L. -3.30 GSH01 IH102
F.F.L. -3.25 B1 09 DRIVER'S BATHROOM
TV
F.F.L. -3.30
ACD01 IH102 TG01 IH103
WD01 IH100 F.F.L. -3.25 DRIVER'S ROOM B1 08
F.F.L. -3.25 GARDEN BATHROOM B1 07 MI01 IH104
WD02 IH100
F.F.L. -3.30
SHOW GARAGE
RAMP TO BASEMENT 32.00m SLOPE 10%
WD22 IH102 F.F.L. -3.25 F.F.L. -3.25 MAID'S ROOM
ENTRANCE
F.F.L. -3.25 B1
18
F.F.L. -3.09 F.F.L. -3.25 F.F.L. -3.38 SHISHA LOUNGE
MAID'S BATHROOM
F.F.L. -3.25
B1
GENERAL NOTES:
06 SUNKEN GARDEN
F.F.L. -3.25 ACD02 B1 19 IH102
B1 HPL01 IH106
11
LOBBY 01 F.F.L. -3.38
B1
01
STAIR 01 F.F.L. -2.17
F.F.L. -3.30 STAIR 02 KITCHEN B1
F.F.L. -3.25
02
F.F.L. -3.25
SERVICE DOORS
F.F.L. -3.25
TGD02 IH103
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
F.F.L. -3.30 SERVICE ENTRANCE
WD06 IH100
REVISION: 05
F.F.L. -3.25
WD03 IH100
B1
16
04
MI01 IH104
F.F.L. -3.25 WD05 IH100
WD05 IH100
ELEC.
BATHROOM 01
F.F.L. -3.25
01 NO. DESCRIPTION
SERVICE ENTRANCE
MR. MOHAMED FARUQE LOBBY 02 LAUNDRY
LOBBY 03 B1
DATE
OWNER
F.F.L. -3.25
F.F.L. -3.25 F.F.L. -3.25 SD02 IH102
02
WD07 IH100
SD01 IH102
WD04 IH100
03
B1 03 F.F.L. -3.25
B1
15
F.F.L. -3.25
MECHANICAL B1 13
B1 12 F.F.L. -3.25
VILLA 123 PROJECT
GAMING OPEN ROOM
17
F.F.L. -3.25
B1
05
DUBAI LOCATION
CINEMA B1 PROJECTOR
04
F.F.L. -3.70
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE
F.F.L. -3.25
SD02 IH102
DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
BAESMENT FLOOR ANNOTAION PLAN
DRAWING TITLE
PUMP ROOM & BALANCETANK WATER TANK
B1 14 F.F.L. -3.25
JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
1:50
Arch. DINA HADDADIN
PROJECT No
SHEET No
IP800
FOR TENDERING HPL05 IH107
BBQ F.F.L. -3.20
F.F.L. -0.20
SHOW KITCHEN GF 03
F.F.L. +0.45
F.F.L. -2.59 OPEN TO ABOVE OPEN TO SKY
LIVING ROOM GF 11
F.F.L. +0.45
F.F.L. +0.45 LOBBY 02 GF 10 F.F.L. +0.607 TV
REFER TO KITCHEN SUPPLIER FOR DOOR DETAILS
n Sunke n e d r a G
DINING AREA GF
02
MI04 IH104 FAMILY BATHROOM F.F.L. +0.45 GF
05
F.F.L. +0.40
BANQUETING AREA WD11 IH101
F.F.L. +0.45 GF
HPL03 IH106
04 MI03 IH104
GUEST SUITE 01 F.F.L. +0.45 GF
STAIR 02 WD11 IH101 LOBBY 03 GF
12
F.F.L. +0.45 GUEST SUITE 01 BATHROOM MI08 IH105 GF 19
OPEN TO SKY
DIRTY KITCHEN GF
TGD03 IH103
SHOWER OPEN TO ABOVE
WD10 IH101
06
14
F.F.L. -3.20
WD15 IH101 MI05 IH104
WD14 IH101
MI06 IH104 STAIR 01
GUEST SUITE 02 BATHROOM
LOBBY 01
REFLECTIVE POOL
F.F.L. +0.45
F.F.L. +0.45 GF
RAMP TO BASEMENT 32.00m
F.F.L. +0.45
08
GF
LOBBY 04 GF 13
MI06 IH104 WD13 IH101
950x20cm
SLOPE 10%
GENERAL NOTES:
18
TGD04 IH103
WD13 IH101
40x80cm 200x20cm
WD09 IH100
F.F.L. +0.45
TGD05 IH103
WC
TGD06 SHOWER IH103
F.F.L. +0.45
TGD06 IH103
F.F.L. +0.45 PANTRY GF 07 WD12 IH101
F.F.L. +0.45 POWDER ROOM GF
SHOWER
FOYER GF 01
09
MI02 IH104
HPL02 IH106
WD08 IH100 OPEN TO ABOVE
GF 17 GUEST SUITE 03 BATHROOM F.F.L. +0.45 MI08 IH105
WD15 IH101 GUEST SUITE 02 F.F.L. +0.45
MI06 IH104
GF
SIDE ENTRANCE
15
TG02 IH103
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations. REVISION:
F.F.L. +0.40
05
HPL09 IH107
HPL02 IH106
HPL02 IH106
MAIN ENTRANCE
REFLECTIVE POOL
GUEST SUITE 03 F.F.L. +0.45
04 03
GF
16
02
F.F.L. +0.40
MI07 IH105
01 NO. DESCRIPTION
MI07 IH105
HPL04 IH107
DATE
MR. MOHAMED FARUQE OWNER
VILLA 123 PROJECT
F.F.L. -0.20
DUBAI LOCATION
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE GARBAGE RM GF 19
CONSTRUCTION DRAWINGS PHASE
ELECT. RM. GF
GROUND FLOOR ANNOTAION PLAN
20
F.F.L. +7.66
DRAWING TITLE
F.F.L. +7.66
JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
Arch. DINA HADDADIN
LPG METER PAPER SIZE DRAWING SCALE
GATE LEVEL
A1
1:50
PROJECT No
SHEET No
IP801
EDGE OF CANOPY
FOR TENDERING
EDGE OF CANOPY
SEMI-COVERED BALCONY
F.F.L. +4.80
LIMIT IF PERGOLA
TERRACE
HPL05 IH107
FAMILY ROOM FF F.F.L. +4.85
05
OPEN TO BELOW OPEN TO SKY
FF 16 MASTER BEDROOM 03
open to sky
HPL08 IH107
F.F.L. +4.85
MI09 IH105
LOBBY 01 FF 01
GUEST SUITE 05
MASTER BEDROOM 03 BATHROOM FF
17
WD16 IH101
TGD12 IH104
F.F.L. +4.85
F.F.L. +4.85
TGD14 IH104
HPL08 IH107 F.F.L. +4.85
LOBBY 03 FF 03
F.F.L. +4.85
FF
06
SHOWER
TGD07 IH103
F.F.L. +4.85
F.F.L. +4.85
MASTER BEDROOM 03 DRESSING
MI16 IH105
FF
18
OPEN TO BELOW
MI14 IH105
MI16 IH105
FF 07 GUEST SUITE 05 BATHROOM MI06 IH104
WD18 IH101
F.F.L. +4.85 WC
STAIR 02
LOBBY 02 FF 02
HPL08 IH107
WD16 IH101 MI10 IH105
MI14 IH105 WC
GENERAL NOTES:
FF
HPL08 IH107
GUEST SUITE 04
F.F.L. +4.85
MI15 IH105
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
OPEN TO SKY MASTER BEDROOM 02 DRESSING
TGD13 IH104
HPL08 IH107
SHOWER
FF
WD18 IH101
WD16 IH101
08
F.F.L. +4.85
15
SHOWER SHOWER
F.F.L. +4.85
TGD08 IH103
MI06 IH104
F.F.L. +4.85
TGD11 IH104
GUEST SUITE 04 BATHROOM 09 TGD08 FF IH103 MASTER BEDROOM 02 BATHROOM FF 14
F.F.L. +4.85 WC
F.F.L. +4.85
WD16 IH101
MI11 IH105
LOBBY 04 FF
04
F.F.L. +4.85
open to sky
MI12 IH105
REVISION:
TGD10 IH104
WD17 IH101 OPEN TO BELOW FF 13 MASTER BEDROOM 02
WC
TGD09 IH104
MASTER BEDROOM 01 BATHROOM FF 12
05
HPL08 IH107
TG03 SHOWER IH103
04 03
WD19 IH102
02 01
F.F.L. +4.85
NO. DESCRIPTION
BATHTUB
MR. MOHAMED FARUQE
MI13 IH105
HPL04 IH107
MASTER BEDROOM 01 DRESSING FF 11
MASTER BEDROOM 01 F.F.L. +4.85 FF
DATE
OWNER
VILLA 123 PROJECT
WD20 IH102
10
DUBAI
OPEN TO SKY BALCONY
HPL07 IH106
HPL07 IH106
LOCATION
EDGE OF CANOPY
HPL06 IH106 COVERED BALCONY
HPL06 IH106
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE
HPL06 IH106
HPL06 IH106
CONSTRUCTION DRAWINGS PHASE
FIRST FLOOR ANNOTAION PLAN
DRAWING TITLE
EDGE OF CANOPY
JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
1:50
Arch. DINA HADDADIN
PROJECT No
SHEET No
IP802
FOR TENDERING
CANOPY
FIRE PIT
F.F.L. +8.60 OPEN TO SKY
ROOF LOUNGE F.F.L. +9.20
JACUZZI
F.F.L. +8.90
TGD01 IH103
SHOWER
BATHROOM F.F.L. +8.65 RF
02 MI17 IH105
WD21 IH102
BBQ AREA
GENERAL NOTES:
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
LOBBY 01 RF 01
SERVICE AREA
F.F.L. +8.60
OPEN TO SKY F.F.L. +8.60 F.F.L. +8.65
REVISION: 05 04 03 02 01 NO. DESCRIPTION
F.F.L. +8.60
SERVICE AREA
DATE
MR. MOHAMED FARUQE OWNER
VILLA 123 PROJECT
DUBAI LOCATION
CONCEPT DESIGN PHASE F.F.L. +9.45
SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
ROOF FLOOR ANNOTAION PLAN
DRAWING TITLE
ENTRY FRAME
JULY 2023
ISSUE DATE
F.F.L. +8.25
CANOPY
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
1:50
Arch. DINA HADDADIN
PROJECT No
SHEET No
IP803
FOR TENDERING
GENERAL NOTES:
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations. REVISION: 05 04 03 02 01 NO. DESCRIPTION
DATE
MR. MOHAMED FARUQE OWNER
VILLA 123 PROJECT
DUBAI LOCATION
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
DRAWING TITLE
TILES SHCEDULE/ FLOORING JULY 2023
ISSUE DATE
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
DESIGNED BY:
Arch. DINA HADDADIN
PROJECT No
SHEET No
FOR TENDERING
GENERAL NOTES:
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations. REVISION: 05 04 03 02 01 NO. DESCRIPTION
DATE
MR. MOHAMED FARUQE OWNER
VILLA 123 PROJECT
DUBAI LOCATION
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
DRAWING TITLE
MATERIALS SCHEDULE/ WALLS JULY 2023
ISSUE DATE
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
DESIGNED BY:
Arch. DINA HADDADIN
PROJECT No
SHEET No
FOR TENDERING
DIMENSION LAYOUT LEGEND SYMBOL
DESCRIPTION CLEAR DIMENSION (BETWEEN PLASTER) DIMENSION BETWEEN CLADDING
GENERAL NOTES:
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations. REVISION: 05 04 03 02 01 NO. DESCRIPTION
DATE
MR. MOHAMED FARUQE OWNER
VILLA 123 PROJECT
DUBAI LOCATION
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
DRAWING TITLE
LOBBY,KITCHEN & SHISHA LOUNGE ENLARGMENT LAYOUTS JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
1
3D SHOT
2
DIMENSION PLAN
A1
1:25
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-B1.01-A
FOR TENDERING FURNITURE LAYOUT LEGEND
HIDDEN LIGHT DET. IE-B1.01-G
CODE
DESCRIPTION
FR-S01
SOFA
FR-S02
SOFA
FR-T01
TABLE
FR-T03
TABLE
FR-T13
TABLE
FR-ST01
STOOL
FR-SI01
SINK 50*45CM BLANCO (CLARON 450-IF)
FR-S01
FR-T01
TAP MIXER BLANCO (SOLENTA-S Senso Lever right)
FR-MI01 ELEV 1
ELEV 5
A
ELECTRIC STOVE 60*60CM
B
BUILT IN MINI FRIDGE W56*D60*H70 CM
ELEV 2
FR-T03 SHISHA LOUNGE B1 06
ELEV 4
FR-S02
ELEV 3
GENERAL NOTES:
1 FR-MI0
FR-SI01
LOBBY 01 B1
01
STAIR 02
ELEV 6
KITCHEN B1
02
ELEV 9
B B A
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations. REVISION: 05
SERVICE DOORS
04
FR-T13
03
FR-ST01
FR-FI15
FR-ST01 FR-ST01
02 01 NO. DESCRIPTION
DATE
02 FR-AC BATHROOM 01 B1 03
MR. MOHAMED FARUQE
FR-FI01 OWNER
01 FR-AC
VILLA 123
FR-FI02
PROJECT
FR-FI14
DUBAI LOCATION
ELEV 7
ELEV 8
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
CABINET
DRAWING TITLE
LOBBY,KITCHEN & SHISHA LOUNGE ENLARGMENT LAYOUTS JULY 2023
ISSUE DATE
ISLAND DET. IE-B1.01-E
KITCHENETTE DET. IE-B1.01-G
CABINET DET. IE-B1.01-G
TABLE DET. IE-B1.01-G
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
1
ANNOTATION PLAN
2
FURNITURE PLAN
A1
1:25
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-B1.01-B
FOR TENDERING LIGHTING LAYOUT LEGEND CODE
LI01 F.C.L -0.33 B.O.S. +0.02
SYMBOL
DESCRIPTION
LI01
PENDANT LIGHT
LI02
DIRECTIONAL SPOT LIGHT
LI05
PENDANT LIGHT
LI06
DIRECTIONAL SPOT LIGHT
LI07
TRACK WITH PROJECTOR LIGHT
LI09
PENDANT LIGHT
LI07
F.C.L -0.33 B.O.S. +0.02
EXPOSED CEILING B.O.S. +0.02
LI06
LI06
LI06
F.C.L -0.33 B.O.S. +0.02 LI06
EXPOSED SLAB B.O.S. +0.02
EXPOSED CEILING B.O.S. +0.02
LI01
F.C.L -0.23 B.O.S. +0.02
LI07 LI07
LI06 F.C.L -0.33 B.O.S. +0.02
F.C.L -0.23 B.O.S. +0.02
LI06
LI01
LI01 GENERAL NOTES:
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
EXPOSED SLAB B.O.S. +0.02 F.C.L -0.33 B.O.S. -0.18
LI06 F.C.L -0.33 B.O.S. +0.02 LI07 LI05 LI05 LI05 F.C.L -0.23 B.O.S. +0.02
REVISION: 05 04 03
LI06
02
F.C.L -0.23 B.O.S. +0.02
01
LI01
NO. DESCRIPTION
DATE
MR. MOHAMED FARUQE
LI02
OWNER
F.C.L -0.33 B.O.S. +0.02
VILLA 123 PROJECT
EXPOSED SLAB B.O.S. +0.02
LI01
LI02
DUBAI LOCATION
LI06
F.C.L -0.33 B.O.S. +0.02 LINTEL -0.88
LI09
F.C.L -0.23 B.O.S. +0.02
LI01
CONCEPT DESIGN PHASE
LI06
SCHEMATIC DESIGN PHASE LI06
DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE LI06
F.C.L -0.23 B.O.S. +0.02 LI01
DRAWING TITLE
LI06
LOBBY,KITCHEN & SHISHA LOUNGE ENLARGMENT LAYOUTS JULY 2023
ISSUE DATE
LI01
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
1
REFLECTED CEILING PLAN
2
LIGHTING PLAN
A1
1:25
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-B1.01-C
CD19 ID003
CD33 ID004
FOR TENDERING FLOORING LAYOUT LEGEND
B.O.S +0.02
CODE
DESCRIPTION
SYMBOL
TL-02
LEA CERAMICHEMASTERPIECE MASTER WHITE 120*120CM NAT.
TL-04
DESVRES ARIANADORICA AVORIO 120*280cm NAT.
TL-07
PEBBLES
TS
TRANSITION STRIP
F.C.L -0.33
CD10 ID002
2
MATERIAL LEGEND CODE
F
F
MATERIAL
1
SENSI-UP-MARQUINIA SELECT(120*278 CM )
2
PAINT FINISH
3
ALUMINUM FINISH ON MDF SHELF
5
LEA CERAMICHE-MASTERPIECE MASTER WHITE 120*120CM NAT.
6
CURTAINS
7
HPL LOUVERS
8
DORICA AVORIO (120*280 CM )
9
MIRROR
20
VENEER WOOD FINISH
F
F.F.L. -3.25 TL-02
FD01 ID001 F.F.L -3.25 F.F.L. -3.306
2
ELEVATION 01
FD05 ID001
SP
B.O.S +0.02 F.F.L. -3.25 F.F.L. -3.25
F.C.L -0.33
TL-02
CD33 ID004
F.F.L. -3.38 TL-07
F.F.L. -3.38
GENERAL NOTES:
2
OPEN
2
OPEN
FD10 ID001
F.F.L. -3.25 TL-02
FD05 ID001
F.F.L -3.25
3
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations. REVISION:
ELEVATION 02
05 04 03 02 01
.25 F.F.L. -3 TL-04
F.F.L. -3.25
SP
B.O.S +0.02
NO. DESCRIPTION
F.C.L -0.23 F.C.L -0.33
OWNER
DATE
MR. MOHAMED FARUQE
CD01 ID002
CD33 ID004
TL-02
VILLA 123 PROJECT
F
DUBAI LOCATION
2
TS
3
2
CONCEPT DESIGN PHASE OPEN
OPEN
SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
F.F.L. -3.25 TL-02
LOBBY,KITCHEN & SHISHA DRAWING TITLE LOUNGE ENLARGMENT ELEVATIONS JULY 2023
ISSUE DATE
F.F.L -3.25
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
1
REFLECTED CEILING PLAN
4
ELEVATION 06
A1
1:25
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-B1.01-D
CD10 ID002
FOR TENDERING
B.O.S +0.02
MATERIAL LEGEND
F.C.L -0.33
CODE
F.C.L -0.58
MATERIAL
20 F 1
SENSI-UP-MARQUINIA SELECT(120*278 CM )
2
PAINT FINISH
3
ALUMINUM FINISH ON MDF SHELF
5
LEA CERAMICHE-MASTERPIECE MASTER WHITE 120*120CM NAT.
6
CURTAINS
7
HPL LOUVERS
8
DORICA AVORIO (120*280 CM )
9
MIRROR
20
VENEER WOOD FINISH
CD12 ID002
20
2
1
7
FD05 ID001 F.F.L -3.25
F.F.L -3.70
1
FD09 ID001
FD11 ID001
ELEVATION 03
HIDDEN LIGHT
B.O.S +0.02
F.C.L -0.33
1
2
2
7
2
OPEN
GENERAL NOTES:
OPEN
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
FD09 ID001 F.F.L -3.25
FD05 ID001
2
REVISION:
ELEVATION 04
05 04 03 02 01
B.O.S +0.02
NO. DESCRIPTION
F.C.L -0.33
OWNER
DATE
MR. MOHAMED FARUQE VILLA 123 PROJECT
DUBAI LOCATION
CONCEPT DESIGN PHASE F
F
SCHEMATIC DESIGN PHASE F
DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
LOBBY,KITCHEN & SHISHA DRAWING TITLE LOUNGE ENLARGMENT ELEVATIONS JULY 2023
ISSUE DATE
FD10 ID001 F.F.L -3.25
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
3
ELEVATION 05
A1
1:25
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-B1.01-E
FOR TENDERING B.O.S +0.02 B.O.S +0.02 F.C.L -0.33
F.C.L -0.23 F.C.L -0.33
CD25 ID004
MATERIAL LEGEND CODE
CD33 ID004
CD33 ID004
MATERIAL
2
1
SENSI-UP-MARQUINIA SELECT(120*278 CM )
2
PAINT FINISH
3
ALUMINUM FINISH ON MDF SHELF
5
LEA CERAMICHE-MASTERPIECE MASTER WHITE 120*120CM NAT.
6
CURTAINS
7
HPL LOUVERS
8
DORICA AVORIO (120*280 CM )
9
MIRROR
20
VENEER WOOD FINISH
F. 20
5 1
2
3
OPEN
2
OPEN
OPEN
6
2
OPEN
2
2 F.F.L -3.25
F.F.L -3.25
FD10 ID001
ELEVATION 07
1
2
FD05 ID001
ELEVATION 08
WOODEN TABLE
B.O.S +0.02
F.C.L -0.33
CD33 ID004
OPEN
OPEN GENERAL NOTES:
BUILT IN MINI FRIDGE
BUILT IN MINI FRIDGE
ELECTRIC STOVE
F.F.L -3.25
DRAWERS CONCRETE ISLAND
ELEVATION 09
3
FD09 ID001
FD10 ID001
4
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations. REVISION:
ISLAND DETAIL - PLAN
05 04 03 02 01 NO. DESCRIPTION
ALUMINUM FINISH ON MDF CABINET CORIAN TOP
ALUMINUM FINISH ON MDF CABINET
DATE
CONCRETE COUNTER TOP
MR. MOHAMED FARUQE
DETAIL B OWNER
CORIAN TOP
VILLA 123
WOODEN TABLE
PROJECT
DUBAI BUILT IN MINI FRIDGE
6
BUILT IN MINI FRIDGE
LOCATION
ISLAND DETAIL - DETAIL A CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
CORIAN TOP DRAWING TITLE
EMBEDDED HANDLE
LOBBY,KITCHEN & SHISHA LOUNGE ENLARGMENT ELE.&DET. JULY 2023
ISSUE DATE
DETAIL A
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
CABINET DOOR
PAPER SIZE DRAWING SCALE
5
ISLAND DETAIL - SECTION
7
ISLAND DETAIL - DETAIL B
9
ISLAND DETAIL - ELEVATION
A1
A.S
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-B1.01-F
FOR TENDERING
ALUMINUM FINISH ON MDF CABINET
FR-SI01
PLAN C
DRAWERS
CABINET
F.
CABINET
VENEER WOOD FIXED PANEL
1
KITCHENETTE DETAIL- PLAN A
ALUMINUM FINISH ON MDF SHELF
VENEER WOOD CABINET DOOR
ALUMINUM FINISH ON MDF CLADDING
DETAIL D ALUMINUM FINISH ON MDF SHELF
PLAN B
ALUMINUM FINISH ON MDF
CORIAN COUNTER TOP
DETAIL B 2
KITCHENETTE DETAIL- PLAN B PLAN A
GENERAL NOTES:
ALUMINUM FINISH ON MDF CABINET
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
DETAIL A 2CM GROOVE
FIXED ALUMINUM FINISH ON MDF PANEL REVISION: 05
3
KITCHENETTE DETAIL- PLAN C
4
KITCHENETTE DETAIL- ELEVATION & SECTION
7
CABINTER DETAIL- SECTION
04 03
WOODEN TABLE
02 01 NO. DESCRIPTION
DATE
MR. MOHAMED FARUQE OWNER
VILLA 123 PROJECT
5
TABLE DETAIL- PLAN
DUBAI LOCATION
WOODEN TABLE
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
HIDDEN LIGHT
DRAWING TITLE
LOBBY,KITCHEN & SHISHA LOUNGE ENLARGMENT DETAILS JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
3
HIDDEN LIGHT DETAIL- PLAN
6
TABLE DETAIL- SECTION
A1
A.S
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-B1.01-G
BASIN&MIRROR DETAIL IE-B103-A
FOR TENDERING FR-FI15
F.C.L. -0.23 B.O.S. +0.02
BATHROOM 01 B1 03
LIGHTING LAYOUT LEGEND
ELEV 1 ELEV 3
CODE
LI01
FR-AC02
SYMBOL
DESCRIPTION
LI01
HIDDEN LIGHT
LI02
SPOT LIGHT
LI09
PENDANTLIGHT
F.F.L. -3.25 FR-FI01
ELEV 4
FR-AC01
ELEV 2
TL-04
F.C.L. -0.33 B.O.S. +0.02 SP
LI02
FR-FI02 FR-FI14
F.C.L. -0.23 B.O.S. +0.02
LI02
LI09
FLOORING LAYOUT LEGEND
LINTEL -0.88
ANNOTATION PLAN
1
2
DIMENSION PLAN
FURNITURE PLAN
3
REFLECTED CEILING PLAN
4
CODE
TS
LIGHTING PLAN
5
DESCRIPTION
SYMBOL
TL-04
DESVRES ARIANA-DORICA AVORIO 120*280cm NAT.
TS
TRANSITION STRIP
FLOORING PLAN
6
MATERIAL LEGEND CODE
FIXTURE
BASIN MIXER
CODE
DESCRIPTION
FR-FI14
FREE STANDING FAUCET AND MIXER BLACK FINISH
B.O.S +0.02
B.O.S +0.02
B.O.S +0.02
B.O.S +0.02
SAMPLE TO BE PROVIDED FOR CLIENT CONFIRMATION
F.C.L -0.23 F.C.L -0.33
F.C.L -0.23 F.C.L -0.33
F.C.L -0.23 F.C.L -0.33
F.C.L -0.23 F.C.L -0.33
HAND BIDET MIXER
CD02 ID002
CD02 ID002
CD01 ID002
CD01 ID002
CD05 ID002
CD05 ID002
HAND HELD BIDET
FR-FI15
F. FR-FI01
TOILET SEAT 4
1
8
TOILET FLUSH PLATE
8
FR-FI16
FR-AC02
TRASH BIN
IMAGE
newform N21 Art. 71720
External part. To combine with oncealed part 27852.
WALL MOUNTED TOILET SEAT
SCARABEO
BLACK FINISH
Moon Wall-mounted WC 45 Moon CODE: 5524CL
WALL MOUNTED FLUSH PLATE
Newform DELTA ZERO
STAINLESS STEEL FINISH
Art. 887
FREE STANDING TRASH BIN
1
SENSI-UP-MARQUINIA-SELECT(120*278 CM )
4
WOOD FINISH
COUNT
8
DORICA AVORIO (120*280 CM )
1
9
MIRROR
newform Art. 885
BLACK FINISH
8
9
SUPPLIER
1
1
1
GENERAL NOTES:
BY CONTRACTER
1
BY CONTRACTER
1
BLACK FINISH FR-FI14 FR-FI15
FR-FI16
WALL MOUNTED PAPER FR-AC01 HOLDER
TOILET PAPER HOLDER
BLACK FINISH
4 FREE STANDING WASH BASIN
FD02 ID001 F.F.L -3.25
F.F.L -3.25
FR-FI01
FD04 ID001
F.F.L -3.25
FR-FI02
F.F.L -3.25
FR-FI01
FR-FI02
ABK-SENSI-UP-MARQUINIA TILES FINISH
FR-FI01
FD02 ID001
FD04 ID001
FD02 ID001
FD02 ID001
WASH BASIN
1
PRESS-BUTTON FR-AC03 DRAIN
TOILET BRUSH
PRESS -BUTTON DRAIN BLACK FINISH
FR-AC04 WALL MOUNTED BRUSH BLACK FINISH
MATERIAL
CUSTOM MADE 1
REFER TO DRAWING newform BLINK Art. 230 1”1/4 press-button drain
1
BY CONTRACTER
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
1 REVISION: 05
*** SAMPLES TO BE PROVIDED FOR CLIENT CONFIRMATION.
04 03 02 01 NO. DESCRIPTION
7
ELEVATION 01
ELEVATION 02
8
ELEVATION 03
9
ELEVATION 04
10
MR. MOHAMED FARUQE
FIXTURES SCHEDULE
11
DATE
OWNER
VILLA 123 PROJECT
DUBAI LED LINEAR PROFILE WITH DIFFUSER
MIRROR
3*3CM SUBSTRUCTURE TO HOLD MIRROR
MIRROR
LED LINEAR PROFILE WITH DIFFUSER
LOCATION
SHADOW GAP WITH PAINTED SOLID PEICE CONCEPT DESIGN PHASE
MIRROR
LED LINEAR PROFILE WITH DIFFUSER
SCHEMATIC DESIGN PHASE
LED LINEAR PROFILE WITH DIFFUSER
WOODEN SHELF
15
DESIGN DEVELOPMENT PHASE
MIRROR DETAIL-SIDE&FLOOR DETAIL (FD04)
CONSTRUCTION DRAWINGS PHASE
LED LINEAR PROFILE WITH DIFFUSER
DRAINAGE SLOPE DIRECTION
DRAWING TITLE
BATHROOM 01 ENLARGMENT LAYOUTS, ELEVATIONS & DETAILS JULY 2023
ISSUE DATE
WOODEN SHELF PORCELAIN FINISH FREE STANDING WASH BASIN
DESIGNED BY:
DRAWN BY:
WOODEN SHELF
Arch. DALIA RAWABDEH
Arch. DINA HADDADIN
LED LINEAR PROFILE WITH DIFFUSER PAPER SIZE DRAWING SCALE
12
BASIN DETAIL- SECTION & SIDE ELEVATION
13
BASIN & MIRROR DETAIL-PLAN
14
SHELF DETAIL-SECTION
16
SHELF DETAIL-LIGHT DETAIL
A1
A.S
PROJECT No
SHEET No
IE-B1.03-A
FOR TENDERING
1
DIMENSION PLAN
GENERAL NOTES:
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations. REVISION: 05 04 03 02 01
CINEMA B1 04
GAMING OPEN ROOM B1 05
NO. DESCRIPTION
DATE
MR. MOHAMED FARUQE ELEV 1 ELEV 3
ELEV 5
OWNER
ELEV 4 ELEV 2
VILLA 123 PROJECT
DUBAI LOCATION
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
CENIMA & GAMING ROOM ENLARGMENT LAYOUTS DRAWING TITLE JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
2
ANNOTATION PLAN
A1
1:25
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-B1.04-A
FOR TENDERING FR-CU01
FURNITURE LAYOUT LEGEND CODE
DESCRIPTION
FR-S03
SOFA
FR-T12
TABLE
FR-C06
CHAIR
FR-CU01
CURTAIN
FR-S03
FR-CH06 FR-CH06
FR-T12 FR-S03
PROJECTOR
FR-CH06 FR-CH06 FR-CU01
FR-S03
INDY500 WIDE
1
INDY500 WIDE
INDY500 WIDE
FURNITURE PLAN
GENERAL NOTES:
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
CURTAIN TRACK EXPOSED SLAB B.O.S. +0.02
EXPOSED SLAB B.O.S. +0.02
EXPOSED SLAB B.O.S. +0.02
REVISION: 05 04 03 02 01 NO. DESCRIPTION
PROJE C PROVI TOR SION
PROJE CTOR PROVI SION
CURTAIN TRACK
DATE
MR. MOHAMED FARUQE OWNER
WALL T.V&D A
F.C.L. -0.58 B.O.S. +0.02
TA OU
TLET
VILLA 123
CEILIN G T.V&D ATA O UT
PROJECT
LET
F.C.L +0.33 B.O.S. +0.02
F.C.L +0.33 B.O.S. +0.02
DUBAI LOCATION
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
CENIMA & GAMING ROOM ENLARGMENT LAYOUTS DRAWING TITLE JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
2
REFLECTED CEILING PLAN
A1
1:25
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-B1.04-B
FOR TENDERING LIGHTING LAYOUT LEGEND CODE
LI07A
WALL T.V&D A
TLET
LI07A
TRACK WITH LED LINEAR LIGHT
LI07B
TRACK WITH LED LINEAR &PROJECTOR LIGHT
LI08
LINEAR LIGHT
LI07B
PROJE CTOR PROVI SION
TA OU
DESCRIPTION
LI06
LI07B
PROJE C PROVI TOR SION
SYMBOL
FLOORING LAYOUT LEGEND CODE
CEILIN G T.V&D ATA O UT
DESCRIPTION
SYMBOL
TL-01
LEA CERAMICHEBIOSELECT-OAK VANILLA 20*120cm NAT.
TL-02
LEA CERAMICHEMASTERPIECE MASTER WHITE 120*120CM NAT.
TS
TRANSITION STRIP
LET
LI07B
LI07B
LI07A
1
LIGHTING PLAN
GENERAL NOTES:
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
F.F.L. -3.40 TL-02 F.F.L. -3.55 TL-02 SP
REVISION: 05 04 03 02 01 NO. DESCRIPTION
MR. MOHAMED FARUQE
F.F.L. -3.70 TL-01
DATE
F.F.L. -3.25
OWNER
TL-02
VILLA 123 PROJECT
DUBAI LOCATION
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
CENIMA & GAMING ROOM ENLARGMENT LAYOUTS DRAWING TITLE JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
2
FLOORING PLAN
A1
1:25
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-B1.04-C
CD12 ID002
FOR TENDERING
B.O.S +0.02
F.C.L +0.33
F.C.L +0.58 MATERIAL LEGEND
CD05 ID002
CODE
F
OPEN
F
MATERIAL
2
PAINT FINISH
5
LEA CERAMICHE-MASTERPIECE MASTER WHITE 120*120CM NAT.
10
EXTERIOR STONE
OPEN
5
6
10
F.F.L -3.25
5 F.F.L -3.70
1
ELEVATION 01
FD09 ID001
FD09 ID001
CD12 ID002
CD05 ID002
B.O.S +0.02
F.C.L +0.58
GENERAL NOTES:
2
INDY500 WIDE
INDY500 WIDE
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
INDY500 WIDE
FD05 ID001 F.F.L -3.25
F.F.L -3.70
2
REVISION:
ELEVATION 02
05
CD12 ID002
CD05 ID002
04 03 02
B.O.S +0.02
B.O.S +0.02
B.O.S +0.02
01 NO. DESCRIPTION
DATE
CD12 ID002
CD05 ID002
MR. MOHAMED FARUQE
F.C.L +0.58
OWNER
VILLA 123 PROJECT
DUBAI LOCATION
10
2
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE 5
6
PROJECTOR SCREEN
FD05 ID001
CENIMA & GAMING ROOM ENLARGMENT ELEVATIONS DRAWING TITLE JULY 2023
ISSUE DATE
F.F.L -3.25
F.F.L -3.25
F.F.L -3.25
T.V & DATA OUTLETS
5
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
Arch. DINA HADDADIN
5 F.F.L -3.70
F.F.L -3.70
PAPER SIZE DRAWING SCALE
3
ELEVATION 03
4
ELEVATION 04
5
ELEVATION 05
A1
1:25
PROJECT No
SHEET No
IE-B1.04-D
FOR TENDERING LI01 FR-FI18 FR-FI19
LI02
FR-FI06
LIGHTING LAYOUT LEGEND
LI02
CODE FR-AC05
FR-AC02
FR-FI15
SYMBOL
DESCRIPTION
LI01
HIDDEN LIGHT
LI02
SPOT LIGHT
LI09
PENDANTLIGHT
LI02
GARDEN BATHROOM B1 07
F.C.L. -0.23 B.O.S. +0.02
LI02
FR-FI01
F.F.L. -3.25 TL-04
ELEV 1 ELEV 3
FR-AC01 ELEV 4 F.C.L. -0.33 B.O.S. +0.02
ELEV 2
FLOORING LAYOUT LEGEND CODE
DESCRIPTION
SYMBOL
SP
LI02 FR-FI02
TL-04
DESVRES ARIANA-DORICA AVORIO 120*280cm NAT.
TS
TRANSITION STRIP
LI02
LINTEL -0.88
FR-FI14
LI09 TS
MATERIAL LEGEND CODE
1
ANNOTATION PLAN
2
DIMENSION PLAN
FURNITURE PLAN
3
4
REFLECTED CEILING PLAN
5
LIGHTING PLAN
FIXTURE
HIDDEN LIGHT WITH DIFFUSER
B.O.S +0.02 B.O.S +0.02
B.O.S +0.02
F.C.L -0.23 F.C.L -0.33
F.C.L -0.23 F.C.L -0.33
BASIN MIXER
CODE
DESCRIPTION
FR-FI14
FREE STANDING FAUCET AND MIXER BLACK FINISH SAMPLE TO BE PROVIDED FOR CLIENT CONFIRMATION
F.C.L -0.33 HAND BIDET MIXER
CD02 ID002
CD02 ID002
HAND HELD BIDET
CD05 ID002
TOILET SEAT
9
FR-FI01
8
TOILET FLUSH PLATE
PORCELAIN SHELF TO MATCH BATHROOM TILE
FR-FI18 FR-FI19
FR-FI14
TRASH BIN
FR-FI16
FR-AC02
TOILET PAPER HOLDER
FR-FI15
1
7
FR-FI02
FR-FI02
FR-FI01
FD02 ID001
ELEVATION 01
8
DETAIL A
FD04 ID001
FD02 ID001
ELEVATION 02
9
ELEVATION 03
LED LINEAR PROFILE WITH DIFFUSER
PRESS-BUTTON FR-AC03 DRAIN
SHOWER SHELF DETAIL
MIRROR
3*3CM SUBSTRUCTURE TO HOLD MIRROR
LED LINEAR PROFILE WITH DIFFUSER
BLACK FINISH
Moon Wall-mounted WC 45 Moon CODE: 5524CL
WALL MOUNTED FLUSH PLATE
Newform DELTA ZERO
STAINLESS STEEL FINISH
Art. 887
ABK-SENSI-UP-MARQUINIA TILES FINISH
PRESS -BUTTON DRAIN BLACK FINISH
FR-AC04 WALL MOUNTED BRUSH
TOILET BRUSH
WOOD FINISH
8
DORICA AVORIO (120*280 CM )
9
MIRROR
1
1
1
GENERAL NOTES:
BY CONTRACTER
1
BY CONTRACTER
1
BLACK FINISH
F.F.L -3.25
FD01 ID001
SCARABEO
WALL MOUNTED WASH BASIN WASH BASIN
F.F.L -3.25
1
1
F.F.L -3.25
4
newform Art. 885
WALL MOUNTED TOILET SEAT
WALL MOUNTED PAPER FR-AC01 HOLDER
FR-AC01
SENSI-UP-MARQUINIA-SELECT(120*278 CM )
COUNT
newform N21 Art. 71720
External part. To combine with oncealed part 27852.
FREE STANDING TRASH BIN
IMAGE
BLACK FINISH
FR-FI16
FD02 ID001
SUPPLIER
BLACK FINISH
FR-FI06
8
8
FR-FI15
1
FLOORING PLAN
6
BLACK FINISH
MATERIAL
CUSTOM MADE 1
REFER TO DRAWING newform BLINK Art. 230 1”1/4 press-button drain
1
BY CONTRACTER
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations. REVISION:
HEAD SHOWER
FR-FI06
BLACK FINISH
WOODEN SHELF
B.O.S +0.02
LED LINEAR PROFILE WITH DIFFUSER
F.C.L -0.33
LED LINEAR PROFILE WITH DIFFUSER
DRAINAGE SLOPE DIRECTION
CD05 ID002 F.
WALL MOUNTED HEAD SHOWER
HAND SHOWER
newform 05
Art. 26534 OR EQUIVALENT
WALL MOUNTED
newform
BLACK HAND SHOWER
CODE: Art. 823
1
04 03 02
FR-FI18
1
01 NO. DESCRIPTION
SHOWER MIXER
WOODEN SHELF
WALL MOUNTED FR-FI19
newform Art. 67688E
1
BLACK SHOWER MIXER
DATE
MR. MOHAMED FARUQE OWNER
VILLA 123
1
11
BASIN & MIRROR DETAIL-PLAN
PORCELAIN FINISH FREE STANDING WASH BASIN
12
SHELF DETAIL- LIGHT DETAIL
TOWEL HOOK
FR-AC05
WALL MOUNTED TOWEL HOOK BLACK FINISH
PROJECT
BY CONTRACTER
1
4
DUBAI LOCATION
*** SAMPLES TO BE PROVIDED FOR CLIENT CONFIRMATION.
16
FIXTURES SCHEDULE CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
WOODEN SHELF MIRROR
LED LINEAR PROFILE WITH DIFFUSER
FD02 ID001
GARDEN BATHROOM ENLARGMENT LAYOUTS DRAWING TITLE
SHADOW GAP WITH PAINTED SOLID PEICE
F.F.L -3.25
MIRROR LED LINEAR PROFILE WITH DIFFUSER
JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
10
ELEVATION 04
13
BASIN DETAIL- SECTION & SIDE ELEVATION
14
SHELF DETAIL-LIGHT DETAIL
15
MIRROR DETAIL-SIDE&FLOOR DETAIL (FD04)
A1
A.S
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-B1.07-A
FOR TENDERING
GENERAL NOTES:
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations. REVISION: 05 04 03 02 01 NO. DESCRIPTION
DATE
MR. MOHAMED FARUQE OWNER
VILLA 123 PROJECT
DUBAI LOCATION
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
FOYER & DINING AREA ENLARGMENT 3D SHOT DRAWING TITLE JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
1:25
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-GF01-A
FOR TENDERING CABINET DET. IE-GF01-F
COLUMN DET. IE-GF01-F
DIMENSION LAYOUT LEGEND SYMBOL
DESCRIPTION CLEAR DIMENSION GYPSUM BOARD DIMENSION
DINING AREA GF 02
FR-CH02
FR-CH02
FR-CH02
FR-CH02
FR-CH02
FURNITURE LAYOUT LEGEND
FR-CH02
FR-T04
CODE
DESCRIPTION
FR-T04
TABLE
FR-CH02
CHAIR
FR-CH02
OPEN TO ABOVE
ELEV 1
FR-CH02
FR-CH02
FR-CH02
FR-CH02
ELEV 3
GENERAL NOTES:
ELEV 2
FR-CH02 FR-CH02
FR-CH02
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations. REVISION: 05 04 03 02 01 NO. DESCRIPTION
DATE
MR. MOHAMED FARUQE
ELEV 4
OWNER
VILLA 123 PROJECT
FOYER GF 01
DUBAI LOCATION
OPEN TO ABOVE
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
HPL LOUVERS DET. IE-GF01-???
FOYER & DINING AREA ENLARGMENT LAYOUTS DRAWING TITLE
PARTITION DET. IE-GF01-F
JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
1
DIMENSION PLAN
2
ANNOTATION PLAN
3
FURNITURE PLAN
A1
1:25
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-GF01-B
FOR TENDERING LI07A F.F.L. +0.45 TL-03
CONTINUE WITH LIVING ROOM STARTING POINT
LIGHTING LAYOUT LEGEND CODE
F.C.L. +4.05 B.O.S. +4.42
SYMBOL
DESCRIPTION
LI06
DIRECTIONAL SPOT LIGHT
LI07A
TRACK WITH LED LINEAR LIGHT
FLOORING LAYOUT LEGEND
F.C.L. +4.05 B.O.S. +4.42
CODE
DESCRIPTION
SYMBOL
LEA CERAMICHESLIMTECH DELIGHT CALACATA ORO 120*120CM POLISHED.
TL-03
F.C.L. +4.15 B.O.S. +4.42
F.F.L. +0.45
TS
TRANSITION STRIP
UL
UPLIGHT
TL-03
F.C.L. +4.05 B.O.S. +4.42
GENERAL NOTES:
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
LI06
LI06
LI06
REVISION:
LI06
05
F.C.L. +4.05 B.O.S. +4.42
04 03
F.C.L. +4.20 B.O.S. +4.42
02
UL
UL
UL
UL
01 NO. DESCRIPTION
DATE
MR. MOHAMED FARUQE F.F.L. +0.45
OWNER
TL-03
VILLA 123 PROJECT
LI07A F.C.L. +4.05 B.O.S. +4.42
DUBAI LOCATION
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
FOYER & DINING AREA ENLARGMENT LAYOUTS DRAWING TITLE JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
1
REFLECTED CEILING PLAN
2
LIGHTING PLAN
3
FLOORING PLAN
A1
1:25
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-GF01-C
FOR TENDERING
MATERIAL LEGEND CODE
CD03 ID002
CD03 ID002
B.O.S +8.22
B.O.S +8.22
F.C.L +8.00
F.C.L +8.00
F.C.L +7.85
F.C.L +7.85
11
2
2
4
MATERIAL
1
SENSI-UP-MARQUINIA SELECT(120*278 CM )
2
PAINT FINISH
4
WOOD FINISH
9
MIRROR
11
CURVED LAMINATE VENEER AS PER APPROVED SAMPLE
12
ABK-SENSI-SIGNORIA-CALACATTAVENA-ORO 120*280
13
PAINTED WOOD FINISH
20
WOOD VENEER FINISH
OPEN
4
FD14 ID001 GLASS RAILING
FD14 ID001 CD24 ID003
B.O.S +4.42
B.O.S +4.42
F.C.L +4.05
F.C.L +4.05
13
GENERAL NOTES:
1. Do not scale from this drawing CD202. All setting out and check dimensions are to be ID003 verified by the contractor on site. Upon receipt of
CD24 ID003
12
20
20
9
20
20
OPEN
11
OPEN
OPEN
OPEN
this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations. REVISION: 05 04 03
1
02 01
FD05 ID001
NO. DESCRIPTION
F.F.L +0.45
F.F.L +0.45
DATE
MR. MOHAMED FARUQE OWNER
FD18 ID001
FD09 ID001
VILLA 123 PROJECT
DUBAI LOCATION
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
FOYER & DINING AREA ENLARGMENT ELEVATIONS DRAWING TITLE JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
1
ELEVATION 01
1
ELEVATION 02
A1
1:25
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-GF01-D
FOR TENDERING
MATERIAL LEGEND CODE
MATERIAL
1
SENSI-UP-MARQUINIA SELECT(120*278 CM )
2
PAINT FINISH
4
WOOD FINISH
9
MIRROR
11
CURVED LAMINATE VENEER AS PER APPROVED SAMPLE
12
ABK-SENSI-SIGNORIA-CALACATTAVENA-ORO 120*280
13
PAINTED WOOD FINISH
20
WOOD VENEER FINISH
CD03 ID002
CD05 ID002 B.O.S +8.22
B.O.S +8.22
F.C.L +8.00
F.C.L +8.00
CD03 ID002
F.C.L +7.85
F
OPEN F
F
F
F
F.C.L +7.85
F
F
F
FD14 ID001 11
B.O.S +4.42
F
F
11
F
F
F
F
CD24 ID003
11 B.O.S +4.42 F
F.C.L +4.05
CD24 ID003
F
GENERAL NOTES:
F.C.L +4.05
F F
F
F
F
F
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
F
F REVISION: 05 04 03 02 01 NO. DESCRIPTION
FD10 ID001 F.F.L +0.45
FD10 ID001 F.F.L +0.45
DATE
MR. MOHAMED FARUQE OWNER
VILLA 123 PROJECT
DUBAI LOCATION
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
FOYER & DINING AREA ENLARGMENT ELEVATIONS DRAWING TITLE JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
1
ELEVATION 03
1
ELEVATION 04
A1
1:25
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-GF01-E
FOR TENDERING
CURVED LAMINATE VENEER AS PER APPROVED SAMPLE
BRASS PARTITION ROD
6MM THICK CALACATTA-VENA-ORO 120*280 2CM STEEL PLATE 5CM SUBFRAME
STRUCTURAL COLUMN
1
PARTITION DETAIL- PLAN
COLUMN DETAIL -PLAN
3
CD29 F.C.L
STRUCTURAL COLUMN
5CM SUBFRAME BRASS PARTITION ROD
CURVED LAMINATE VENEER AS PER APPROVED SAMPLE
BRASS SKIRTING
4
COLUMN DETAIL -DETAIL A
U CHANNEL
GENERAL NOTES:
6MM THICK CALACATTA VENA-ORO 120*280
BRASS PARTITION ROD BRASS COVER F.F.L
U CHANNEL BRASS PARTITION ROD
CURVED LAMINATE VENEER AS PER APPROVED SAMPLE
BRASS COVER
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations. REVISION: 05
5
04
PARTITION DETAIL -CD29,FD18
03 02 01
SENSI UP MARQUINA SELECT CLADDED TOP
NO. DESCRIPTION
DATE
MR. MOHAMED FARUQE OWNER
SENSI UP MARQUINA SELECT CLADDED DRAWER
VILLA 123 PROJECT
DUBAI
CABINET LOCATION
BRASS FINISH
DETAIL A
DETAIL A
HIDDEN LIGHT WITH DIFFUSER
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE
CABINET HANDLE
MIRROR
DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
HIDDEN LIGHT WITH DIFFUSER
FOYER & DINING AREA ENLARGMENT DETAILS DRAWING TITLE
MIRROR 3CM SHADOW GAP
JULY 2023
ISSUE DATE
F.F.L DESIGNED BY:
DRAWN BY:
FD18
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
2
PARTITION DETAIL -ELEVATION
7
CABINET DETAIL -SECTION
8
CABINET DETAIL - DETAIL A
6
COLUMN DETAIL -ELEVATION
A1
A.S
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-GF01-F
FOR TENDERING
GENERAL NOTES:
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations. REVISION: 05 04 03 02 01 NO. DESCRIPTION
DATE
MR. MOHAMED FARUQE OWNER
VILLA 123 PROJECT
DUBAI LOCATION
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
DRAWING TITLE
SHOW KITCHEN ENLARGMENT 3D SHOT JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
1:25
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-GF03-A
FOR TENDERING DIMENSION LAYOUT LEGEND SYMBOL
DESCRIPTION CLEAR DIMENSION GYPSUM BOARD DIMENSION
SHOW KITCHEN GF 03
ISLAND DETAIL IE-G.F03-E FURNITURE LAYOUT LEGEND NO.
ELEV 1 ELEV 3
SEC A
ELEV 4 ELEV 2
DESCRIPTION
DIMENSION (cm)
1
WASHING BASIN (SINGLE)
50 x 50 cm
2
STOVE
90*60 cm
3
FRIDGE
64*60 cm
4
FREEZER
90*60 cm
5
OVEN
90*60 cm
6
MICROWAVE
90*60 cm
FR-S03
SOFA
-
FR-T12
TABLE
-
FR-C06
CHAIR
-
FLOORING LAYOUT LEGEND CODE
DESCRIPTION
SYMBOL
LEA CERAMICHESLIMTECH DELIGHT CALACATA ORO 120*120CM POLISHED.
TL-03
SEC F
SEC C
SEC D
ANNOTATION PLAN
SEC B
2
SEC B
DIMENSION PLAN
SEC C
1
SEC E
TS
GENERAL NOTES:
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
6 5 FR-CH03
TRANSITION STRIP
FR-CH03
FR-CH03
REVISION: 05 04 03
FR-CH03
F.F.L. +0.45
02
TL-03
01 NO. DESCRIPTION
1
MR. MOHAMED FARUQE
FR-CH03
2
DATE
OWNER
VILLA 123 PROJECT
FR-CH03
DUBAI LOCATION
CONTINUE WITH LIVING ROOM STARTING POINT
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
DRAWING TITLE
3
4
SHOW KITCHEN ENLARGMENT LAYOUTS JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
3
FURNITURE PLAN
4
FLOORING PLAN
A1
1:25
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-GF03-B
FOR TENDERING LIGHTING LAYOUT LEGEND F.C.L. +4.15 B.O.S. +4.42
CODE
SYMBOL
DESCRIPTION
LI01
HIDDEN LIGHT
LI07B
TRACK WITH LED LINEAR &PROJECTOR LIGHT
LI01
F.C.L. +4.05 B.O.S. +4.42
LI07B
-
DECORATIVE LIGHT
MATERIAL LEGEND CODE F.C.L. +4.05 B.O.S. +4.42
F.C.L. +4.15 B.O.S. +4.42
MATERIAL
2
PAINT FINISH
12
ABK-SENSI-SIGNORIA-CALACATTAVENA-ORO 120*280
14
WOOD FINISH/ KITCHEN CABINET
15
GLASS DOOR CABINET
20
WOOD VENEER FINISH
F.C.L. +4.15 B.O.S. +4.42
F.C.L. +4.05 B.O.S. +4.42
LI07B
LI01
F.C.L. +4.15 B.O.S. +4.42
F.C.L. +4.05 B.O.S. +4.42
1
F.C.L. +4.05 B.O.S. +4.42
REFLECTED CEILING PLAN
2
LIGHTING PLAN
GENERAL NOTES:
CD25 ID004 B.O.S +8.42
B.O.S +8.42
CD03 ID003
F.C.L +4.15 F.C.L +4.05
CD25 ID004
F
F.C.L +4.15 F.C.L +4.05
REVISION:
CD03 ID003
F
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
05
20
04 03 02 01 NO. DESCRIPTION
15
15
DATE
15
MR. MOHAMED FARUQE OWNER
VILLA 123 PROJECT
DUBAI
OPEN 12
2
LOCATION
20
6
20
20
20
6
20
12
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
F.F.L +0.45
F.F.L +0.45
DRAWING TITLE
SHOW KITCHEN ENLARGMENT LAYOUTS & ELEVATIONS JULY 2023
ISSUE DATE
FD15 ID001 DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
3
ELEVATION 01
4
ELEVATION 02
A1
1:25
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-GF03-C
B.O.S +8.42
FOR TENDERING
B.O.S +8.42
CD03 ID003
HOOD F.C.L +4.15 F.C.L +4.05
F.C.L +4.15 F.C.L +4.05
HIDDEN LIGHT WITH DIFFUSER
CD25 ID004
CD03 ID003
F
14
WOOD CABINET DOOR
CD25 ID004
F
WOODEN SHELF
MATERIAL LEGEND
ABK-SENSI-SIGNORIA-CALACATTA-VENA-ORO 120*280
CODE
MATERIAL
2
PAINT FINISH
12
ABK-SENSI-SIGNORIA-CALACATTAVENA-ORO 120*280
14
WOOD FINISH/ KITCHEN CABINET
15
GLASS DOOR CABINET
20
WOOD VENEER FINISH
14
4
F
14
F
DETAIL A
OPEN
MICROWAVE CABINET
14
14 12
2
OVEN CABINET
1*1 GROOVE 14
FD10 ID001
FD15 ID001 F.F.L +0.45
1
F.F.L +0.45
ELEVATION 03
2
F.C.L +4.05
ELEVATION 04
5
DETAIL B
F.C.L +4.05 F.C.L +4.05
F.C.L +4.05
F.C.L +4.05
F.C.L +4.05
F.C.L +3.80
WOODEN FIXED PANEL WOODEN FIXED PANEL
WOODEN FIXED PANEL
WOODEN FIXED PANEL
VENEER WOOD CLADDING
VENEER WOOD CLADDING
GENERAL NOTES:
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
DETAIL B
CABINET WOODEN DOOR
PUSH TO OPEN CABINET GLASS DOOR
PUSH TO OPNEN CABINET GLASS DOOR
CABINET GLASS DOOR
REVISION: 05
CABINET WOODEN DOOR
CABINET WOODEN DOOR
04
WOODEN DOOR
03 02 01 NO. DESCRIPTION
DATE
MR. MOHAMED FARUQE DETAIL A
OWNER
ABK-SENSISIGNORIA CALACATTAVENAORO 120*280
WOODEN CABINET
VILLA 123 PROJECT
FRIDGE OR FREEZER
DUBAI LOCATION
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
CABINET WOODEN DOOR
SHOW KITCHEN ENLARGMENT ELEVATIONS & DETAILS
DRAWING TITLE
JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
FD07
FD17 WOODEN SKIRTING
3
SECTION A,B,C,D,E
WOODEN SKIRTING
WOODEN SKIRTING
3CM SHADOW GAP
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
A.S
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-GF03-D
ABK-SENSI-SIGNORIA-CALACATTA-VENA-ORO 120*280 TOP
ELEV 2
DETAIL C PORCELAIN TILES ON WOOD CABINET DOOR
PORCELAIN TILES ON WOOD CABINET DOOR
FOR TENDERING
STOVE 90CM
PORCELAIN TILES ON WOOD FIXED PANEL
WOODEN TABLE
DRAWERS
DRAWERS
CABINETS
SECTION B PORCELAIN TILES ON WOOD FIXED PANEL
ELEV 4 CABINETS
PORCELAIN TILES ON WOOD CABINET DOOR ELEV 3
CABINETS
PORCELAIN TILES ON WOOD CABINET DOOR
PORCELAIN TILES ON WOOD FIXED PANEL L SHAPE WOODEN TABLE
1
ELEV 1
ISLAND DETAIL -PLAN A
2
ISLAND DETAIL -PLAN B SECTION A
GENERAL NOTES:
PLAN A DETAIL A
ABK-SENSI-SIGNORIA-CALACATTA-VENA-ORO 120*280
GROOVE,PAINTED TO MATCH CABINETS HANDEL COLOR
ABK-SENSI-SIGNORIA-CALACATTA-VENA-ORO 120*280 TOP WOODEN TABLE WOODEN TABLE
DRAWER
CALACATTA-VENA-ORO CLADDED DRAWER DOOR
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
DRAWER PLAN B
REVISION: 05 04 03 02 01
3
ISLAND DETAIL -SECTION A
5
ISLAND DETAIL -ELEVATION 1
NO. DESCRIPTION
DATE
MR. MOHAMED FARUQE OWNER
VILLA 123 PROJECT
DETAIL B WOODEN TABLE
ABK-SENSI-SIGNORIA-CALACATTA-VENA-ORO 120*280 TOP
ABK-SENSI-SIGNORIA-CALACATTA-VENA-ORO 120*280
DUBAI LOCATION
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE
CALACATTA-VENA-ORO FIXED CLADDED BOARED
CALACATTA-VENA-ORO FIXED CLADDED BOARED DRAWERS
DRAWERS
DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
CABINETS
SHOW KITCHEN ENLARGMENT DETAILS
DRAWING TITLE
JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
4
ISLAND DETAIL -SECTION B
6
ISLAND DETAIL -ELEVATION 2
A1
A.S
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-GF03-E
WOODEN TABLE
ABK-SENSI-SIGNORIA-CALACATTA-VENA-ORO 120*280
GROOVE,PAINTED TO MATCH CABINETS HANDEL COLOR
FOR TENDERING
ABK-SENSI-SIGNORIA-CALACATTA-VENA-ORO 120*280
WOODEN TABLE
FIXED
1
ISLAND DETAIL -ELEVATION 3
2
ISLAND DETAIL -ELEVATION 4
3*3CM GROOVE
PAINTED TO MATCH CABINETS HANDEL COLOR DRAWER CALACATTA-VENA-ORO CLADDED DRAWER DOOR CALACATTA-VENA-ORO FIXED CLADDED BOARED
GENERAL NOTES:
DRAWERS
DRAWER
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations. REVISION: 05 04 03 02
3
ISLAND DETAIL -DETAIL A
4
ISLAND DETAIL -DETAIL B
01 NO. DESCRIPTION
DATE
MR. MOHAMED FARUQE OWNER
VILLA 123 PROJECT
DUBAI LOCATION
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CALACATTA-VENA-ORO CONSTRUCTION DRAWINGS PHASE FIXED CLADDED BOARED
SHOW KITCHEN ENLARGMENT DETAILS
1*1CM GROOVE DRAWING TITLE
JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
5
ISLAND DETAIL -DETAIL C
A1
A.S
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-GF03-F
FOR TENDERING DIMENSION LAYOUT LEGEND SYMBOL
DESCRIPTION CLEAR DIMENSION GYPSUM BOARD DIMENSION
F.C.L. +4.05 B.O.S. +4.42
CONTINUE WITH LIVING ROOM STARTING POINT
LIGHTING LAYOUT LEGEND CODE
SYMBOL
DESCRIPTION
LI03
SPOT LIGHT
FLOORING LAYOUT LEGEND CODE BANQUETING AREA GF 04
ELEV 3
LI03
TS
ELEV 4 ELEV 2
LEA CERAMICHESLIMTECH DELIGHT CALACATA ORO 120*120CM POLISHED.
TL-03
TS ELEV 1
DESCRIPTION
SYMBOL
LINTEL +2.92
TRANSITION STRIP
MATERIAL LEGEND F.C.L. +3.80 B.O.S. +4.42
CODE
F.C.L. +2.70 B.O.S. +4.42
MATERIAL
F.F.L. +0.45 TL-03
2
PAINT FINISH
2A
PAINTED GUPSUM BOARED
4
WOOD FINISH
12
ABK-SENSI-SIGNORIA-CALACATTAVENA-ORO 120*280
14
WOOD FINISH/ KITCHEN CABINETS
LI03
LI03
LINTEL +2.92
TS LINTEL +2.92
1
DIMENSION PLAN
ANNOTATION PLAN
2
B.O.S +4.42
B.O.S +4.42
CD05 ID002
CD05 ID002
F.C.L +3.80
FURNITURE PLAN
3
F.C.L +3.80
REFLECTED CEILING PLAN
4
LIGHTING PLAN
5
B.O.S +4.42
B.O.S +4.42
CD05 ID002
F.C.L +4.05
F.C.L +3.80
F.C.L +3.80
FLOORING PLAN
6
GENERAL NOTES:
CD05 ID002
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations. REVISION: 05 04 03 02
2A
01
2
4
4
NO. DESCRIPTION
2
DATE
MR. MOHAMED FARUQE 4
2
2
4
2
2
OWNER
4 20
2
14
2
VILLA 123 PROJECT
DUBAI LOCATION
12
12
12
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE
FD05 ID001 F.F.L +0.45
FD05 ID001
FD05 ID001
F.F.L +0.45
F.F.L +0.45
DESIGN DEVELOPMENT PHASE
14
FD05 ID001
CONSTRUCTION DRAWINGS PHASE
F.F.L +0.45 DRAWING TITLE
BANQUITING AREA ENLARGMENT LAYOUTS & ELEVATIONS JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
7
ELEVATION 01
8
ELEVATION 02
9
ELEVATION 03
10
ELEVATION 04
A1
1:25
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-GF04-A
FOR TENDERING LIGHTING LAYOUT LEGEND CODE
SYMBOL
DESCRIPTION
LI01
HIDDEN LIGHT
LI02
SPOT LIGHT
LI09
PENDANTLIGHT
FLOORING LAYOUT LEGEND F.C.+3.90 B.O.S. +4.42
FR-FI14
CODE
FR-AC06
FR-FI08
LI09
FR-AC02
LI09
F.C.+3.90 B.O.S. +4.42 F.C.+4.20 B.O.S. +4.42
ELEV 1 ELEV 3
ELEV 4 ELEV 2
F.C.+3.80 B.O.S. +4.42
FR-FI01
BATHROOM GF 05
LI02
LINTEL +3.87
LI02
LI02
LI02
LI02
TL-04
DESVRES ARIANADORICA AVORIO 120*120cm NAT.
TS
TRANSITION STRIP
LI02
MATERIAL LEGEND LI01
FR-AC01
CODE
FR-FI15
STRIP LIGHT DETAIL
1
ANNOTATION PLAN
DIMENSION PLAN
2
DESCRIPTION
SYMBOL
FURNITURE PLAN
3
4
REFLECTED CEILING PLAN
B.O.S +4.42
B.O.S +4.42
B.O.S +4.42
F.C.L +4.20
F.C.L +4.20
F.C.L +4.20
F.C.L +3.90 F.C.L +3.80
F.C.L +3.90 F.C.L +3.80
F.C.L +3.90 F.C.L +3.80
CD18 ID003
CD01 ID002
CD01 ID002
CD18 ID003
LIGHTING PLAN
5
WOOD FINISH
8
DORICA AVORIO (120*280 CM )
9
MIRROR
23
LAMINATE WOOD TO MATCH DOORS FINISH
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
F.C.L +4.20
F.C.L +3.90 F.C.L +3.80
CD05 ID002
F
4
GENERAL NOTES:
B.O.S +4.42
CD01 ID002
MATERIAL
CD01 ID002
REVISION: 05 04
8
8
8
03 02 01 NO. DESCRIPTION
8
TS
8
DATE
4
8
MR. MOHAMED FARUQE
F.F.L. +0.45
OWNER
TL-04
9
VILLA 123
FR-AC06
PROJECT
DUBAI
SP 23
LOCATION
FR-FI23
FR-FI15 8
FR-FI23 FR-FI09
FR-FI16
FR-FI09
DRAWER
DRAWER
FR-AC01
DRAWER
FR-FI01
FR-FI01 4
FR-FI23 FR-FI09
SCHEMATIC DESIGN PHASE DRAWER
DRAWER
CONCEPT DESIGN PHASE
DRAWER
DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
F.F.L +0.45
F.F.L +0.45
FD02 ID001
FD02 ID001
F.F.L +0.45
F.F.L +0.45
FD02 ID001
FD02 ID001
DRAWING TITLE
FAMILY BATHROOM ENLARGMENT LAYOUTS & ELEVATIONS JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
6
FLOORING PLAN 7
ELEVATION 01
8
ELEVATION 02
9
ELEVATION 03
10
ELEVATION 04
A1
1:25
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-GF05-A
FOR TENDERING
FIXTURE
CODE
BASIN FAUCET FR-FI23 AND MIXER
LAMINATE WOOD FINISH
DESCRIPTION
SUPPLIER
FREE STANDING FAUCET WITH MIXER BLACK FINISH
newform MINI-X Art. 61310 Single-lever basin mixer
SAMPLE TO BE PROVIDED FOR CLIENT CONFIRMATION HAND BIDET MIXER
HAND HELD BIDET
TOILET SEAT
TOILET FLUSH PLATE
FR-FI15
FR-FI01
FR-FI16
MIRROR TRASH BIN
FR-AC02
COUNT
1
newform Art. 885
BLACK FINISH
External part. To combine with oncealed part 27852.
WALL MOUNTED TOILET SEAT
SCARABEO
BLACK FINISH
Moon Wall-mounted WC 45 Moon CODE: 5524CL
WALL MOUNTED FLUSH PLATE
Newform DELTA ZERO
STAINLESS STEEL FINISH
Art. 887
FREE STANDING TRASH BIN
IMAGE
1
1
1
BY CONTRACTER
1
BY CONTRACTER
1
BLACK FINISH
TOILET PAPER HOLDER
WALL MOUNTED PAPER FR-AC01 HOLDER BLACK FINISH
FREE STANDING WASH BASIN
FR-FI09
SCARABEO BLACK OVAL WASH BASIN
FR-FI23 PRESS-BUTTON FR-AC03 DRAIN
PRESS -BUTTON DRAIN BLACK FINISH
FR-FI09
DETAIL A
FR-AC04 WALL MOUNTED BRUSH
TOILET BRUSH
DRAWER
BLACK FINISH
TOWEL STORAGE
DRAWER
WALL MOUNTED FR-AC06 BLACK TOWEL STORAGE
1 CODE: 8111 newform BLINK Art. 230 1”1/4 press-button drain BY CONTRACTER
BY CONTRACTER
*** SAMPLES TO BE PROVIDED FOR CLIENT CONFIRMATION.
DRAWER DRAWER
DETAIL B 1
SINK ELEVATION DETAIL
2
SINK SECTION DETAIL
3
SHELVING UNIT SECTION DETAIL
5
FIXTURES SCHEDULE
TO MATCH BATHROOM TILE
1
1 GENERAL NOTES:
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations. REVISION: 05 04 03 02 01 NO. DESCRIPTION
DATE
MR. MOHAMED FARUQE
TO MATCH BATHROOM TILE
OWNER
VILLA 123 PROJECT
DUBAI LOCATION
TO MATCH BATHROOM TILE LAMINATE WOODEN DRAWERS
CONCEPT DESIGN PHASE
STRIP LIGHT WITH 1CM BLACK STEEL FRAME
SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
LAMINATE WOODEN DRAWERS DRAWING TITLE
FAMILY BATHROOM ENLARGMENT DETAILS
DETAIL A HIDDEN LIGHT WITH DIFFUSER
DETAIL B
JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
4
DETAIL A & B
6
STRIP LIGHT DETAIL
A1
A.S
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-GF05-B
FOR TENDERING FURNITURE LAYOUT LEGEND NO.
DESCRIPTION
DIMENSION (cm)
A
FRIDGE
80*65 cm
B
FREEZER
80*65 cm
C
COOKING OVEN
90*60 cm
D
DISH WASHER
60*60 cm
E
WASHING BASIN (DOUBLE)
110 x 50 cm
SP FULL-HEIGHT CABINETS
FLOORING LAYOUT LEGEND CODE
F.F.L. +0.45
TS
TL-05
E
DESCRIPTION
SYMBOL
TL-05
60*60CM TILES
TS
TRANSITION STRIP
DIRTY KITCHEN GF 06
A
ELEV 2
D
ELEV 1 B
m
m
cm
cm
C
GENERAL NOTES:
VENTILATION HOOD
FULL-HEIGHT CABINETS
m
m
cm
cm
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
CLADDED WALL
F.F.L. +0.45 TL-05
PANTRY
REVISION: 05 04 03 02 01 NO. DESCRIPTION
DATE
PANTRY FULL-HEIGHT CABINETS
MR. MOHAMED FARUQE OWNER
VILLA 123 PROJECT
DUBAI LOCATION
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
DRAWING TITLE
DIRTY KITCHEN ENLARGMENT LAYOUTS JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
1
DIMENSION PLAN
2
ANNOTATION PLAN
3
FURNITURE PLAN
4
FLOORING PLAN
A1
1:25
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-GF06-A
FOR TENDERING
B.O.S +4.42
LIGHTING LAYOUT LEGEND CODE
CD05 ID002
SYMBOL
DESCRIPTION
LI03
SPOT LIGHT
F.C.L +3.80
16
F.C.L. +4.20 B.O.S. +4.42
14 FULL HEIGHT CABINETS
LINTEL +2.92
F
14 A
F.C.L. +3.80 B.O.S. +4.42
14 B
14
FULL HEIGHT CABINETS
MATERIAL LEGEND CODE
16
MATERIAL
14
WOOD FINISH/ KITCHEN CABINETS
16
60*60 CM TILES
LI03
14
FD03 ID001
SP
F.F.L +0.45
LI03
LI03
m
m
cm
cm
3
ELEVATION 01
GENERAL NOTES:
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
LI03
B.O.S +4.42 F.C.L. +3.80 B.O.S. +4.42
F.C.L +3.80 REVISION: 05 04
LI03
LINTEL +2.92
03 02
BRUSHED STAINLESS STEEL
16
VENTILATION HOOD
01 NO. DESCRIPTION
DATE
MR. MOHAMED FARUQE OWNER
VILLA 123 PROJECT
FULL HEIGHT CABINETS
DUBAI LOCATION
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE C SP
D
DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
F.F.L +0.45 DRAWING TITLE
DIRTY KITCHEN ENLARGMENT LAYOUTS & ELEVATIONS JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
1
REFLECTED CEILING PLAN
2
LIGHTING PLAN
4
ELEVATION 02
A1
1:25
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-GF06-B
FOR TENDERING DIMENSION LAYOUT LEGEND SYMBOL
DESCRIPTION CLEAR DIMENSION GYPSUM BOARD DIMENSION
LINTEL +2.92
LIGHTING LAYOUT LEGEND CODE
CONTINUE WITH LIVING ROOM STARTING POINT LI02
LI02
LI02
LI02
SYMBOL
DESCRIPTION
LI01
HIDDEN LIGHT
LI02
SPOT LIGHT
LOBBY 01 GF 08
FLOORING LAYOUT LEGEND
F.F.L. +0.45 ELEV 1 ELEV 3
TL-03
F.C.L. +4.05 B.O.S. +4.42
F.C.L. +4.15 B.O.S. +4.42 ELEV 4
LI02
LI02
LI02
LI02
CODE
DESCRIPTION
SYMBOL
LEA CERAMICHESLIMTECH DELIGHT CALACATA ORO 120*120CM POLISHED.
TL-03
ELEV 2
TS
TRANSITION STRIP
MATERIAL LEGEND CODE
ELEV 5
LI02
LI02
LI02
LI02
MATERIAL
1
SENSI-UP-MARQUINIA SELECT(120*278 CM )
2
PAINT FINISH
4
WOOD FINISH
20
VENEER WOOD FINISH
LI01
ELEV 6
TS LINTEL +2.92
1
DIMENSION PLAN
2
ANNOTATION PLAN
3
REFLECTED CEILING PLAN
4
LIGHTING PLAN
4
B.O.S +4.42
FLOORING PLAN
GENERAL NOTES:
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
B.O.S +4.42
B.O.S +4.42
B.O.S +4.42
F.C.L +4.15 F.C.L +4.15 F.C.L +4.05
CD01 ID002
F.C.L +4.05
F.C.L +4.05
F.C.L +4.05
CD01 ID002
CD05 ID002
CD05 ID002
REVISION: 05 04
F
03
20
23
20 02 01 NO. DESCRIPTION
DATE
MR. MOHAMED FARUQE OWNER
20 4
1
2
OPEN
4
VILLA 123
OPEN
PROJECT
OPEN
OPEN
DUBAI LOCATION
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
F.F.L +0.45
FD07 ID001
LOBBY 01 ENLARGMENT LAYOUTS&ELEVATIONS
F.F.L +0.45
F.F.L +0.45
F.F.L +0.45
FD07 ID001
FD09 ID001
DRAWING TITLE
FD07 ID001
FD05 ID001
JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
5
ELEVATION 01
6
ELEVATION 02
7
ELEVATION 03
8
ELEVATION 04
A1
1:25
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-GF08-A
FOR TENDERING
MATERIAL LEGEND
B.O.S +4.42
MATERIAL
B.O.S +4.42
CODE
F.C.L +4.15
1
SENSI-UP-MARQUINIA SELECT(120*278 CM )
2
PAINT FINISH
4
WOOD FINISH
20
VENEER WOOD FINISH
F.C.L +4.15 F.C.L +4.05
F.C.L +4.05
CD01 ID002
CD01 ID002
20
F
4
OPEN
2
4
2
DIMENSION LAYOUT LEGEND F.F.L +0.45 F.F.L +0.45
FD07 ID001
1
ELEVATION 05
FD05 ID001
2
ELEVATION 06
GENERAL NOTES:
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations. REVISION: 05 04 03 02 01 NO. DESCRIPTION
DATE
MR. MOHAMED FARUQE OWNER
VILLA 123 PROJECT
DUBAI LOCATION
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
LOBBY 01 ENLARGMENT ELEVATIONS
DRAWING TITLE
JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
1:25
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-GF08-B
FOR TENDERING
GENERAL NOTES:
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations. REVISION: 05 04 03 02 01 NO. DESCRIPTION
DATE
MR. MOHAMED FARUQE OWNER
VILLA 123 PROJECT
DUBAI LOCATION
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
DRAWING TITLE
POWDER ROOM ENLARGMENT 3D SHOTS JULY 2023
ISSUE DATE
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
DESIGNED BY:
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-GF09-A
FOR TENDERING DIMENSION LAYOUT LEGEND SYMBOL
FR-FI15
DESCRIPTION
FR-AC04
CLEAR DIMENSION GYPSUM BOARD DIMENSION
FR-AC02
LIGHTING LAYOUT LEGEND
FR-FI01
CODE
FR-AC01 POWDER ROOM GF 09 ELEV 1 ELEV 3
SYMBOL
DESCRIPTION
LI01
HIDDEN LIGHT
LI02
SPOT LIGHT
LI10
PENDANTLIGHT
ELEV 4 ELEV 2
FLOORING LAYOUT LEGEND FR-FI07
CODE
DESCRIPTION
SYMBOL
TL-04
DESVRES ARIANADORICA AVORIO 120*120cm NAT.
TS
TRANSITION STRIP
FR-FI14
MATERIAL LEGEND CODE
ANNOTATION PLAN
1
DIMENSION PLAN
2
F.C.+3.95 B.O.S. +4.42
3
FURNITURE PLAN
MATERIAL
1
SENSI-UP-MARQUINIA-SELECT(120*278 CM )
4
WOOD FINISH
8
DORICA AVORIO (120*280 CM )
9
MIRROR
LINTEL +2.92
LI01
LI02
LI02
LI02
LI02
F.C.+3.95 B.O.S. +4.42 F.F.L. +0.45 TL-04 F.C.+3.80 B.O.S. +4.42
LI02
LI02
LI02
LI02
GENERAL NOTES:
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
SP LI10
F.C.+4.20 B.O.S. +4.42
REFLECTED CEILING PLAN
4
LIGHTING PLAN
5
6
FLOORING PLAN
REVISION: 05
B.O.S +4.42
B.O.S +4.42
B.O.S +4.42
B.O.S +4.42 04 03
CD29 ID004
F.C.L +3.95
F.C.L +3.95
F.C.L +3.80
F.C.L +3.80
CD26 ID004
CD05 ID002
CD26 ID004
F.C.L +3.95
F.C.L +3.95
F.C.L +3.80
F.C.L +3.80
CD29 ID004
02 01
CD05 ID002
CD22 ID003
NO. DESCRIPTION
DATE
CD22 ID003
MR. MOHAMED FARUQE OWNER
F
VILLA 123
1
8
PROJECT
DUBAI LOCATION
8
8
9 8
1 1
1
8
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
FR-FI14 FR-FI15
FR-FI16
DRAWING TITLE
POWDER ROOM ENLARGMENT LAYOUTS & ELEVATIONS
5
JULY 2023
ISSUE DATE
FD04 ID001
1
F.F.L +0.45
F.F.L +0.45
FR-FI01
FD18 ELEVATIONID001 01
FR-FI01
DESIGNED BY:
DRAWN BY:
F.F.L +0.45
FR-FI02
FD02 ID001
FD02 ID001
7
F.F.L +0.45
1
Arch. DALIA RAWABDEH
FD18 ID001
FD02 ID001
PAPER SIZE DRAWING SCALE
8
ELEVATION 02
9
ELEVATION 03
Arch. DINA HADDADIN
10
ELEVATION 04
A1
1:25
PROJECT No
SHEET No
IE-GF09-B
LED LINEAR PROFILE WITH DIFFUSER
MIRROR
3*3CM SUBSTRUCTURE TO HOLD MIRROR
FOR TENDERING
LED LINEAR PROFILE WITH DIFFUSER
U CHANNEL
6MM THICK SENSI-UP-MARQUINIA-SELECT BRASS PARTITION ROD
2CM STEEL PLATE
BRASS PARTITION ROD
DRAINAGE SLOPE DIRECTION
LED LINEAR PROFILE WITH DIFFUSER
BRASS COVER
1
PARTITION DETAIL-PLAN
5
WOODEN SHELF
BASIN & MIRROR DETAIL- PLAN
BRASS PARTITION ROD CD29
BRASS COVER F.C.L
F.F.L
BRASS PARTITION ROD
WOODEN SHELF U CHANNEL
LED LINEAR PROFILE WITH DIFFUSER
ELEVATION
SECTION
GENERAL NOTES:
3
PARTITION DETAIL-CD29 & FD 18
6MM THICK SENSI-UPMARQUINIA-SELECT
6
FIXTURE
BASIN MIXER
CODE
DESCRIPTION
FR-FI14
FREE STANDING FAUCET AND MIXER BLACK FINISH SAMPLE TO BE PROVIDED FOR CLIENT CONFIRMATION HAND BIDET MIXER
HAND HELD BIDET
TOILET SEAT
FR-FI15
FR-FI01
BLACK FINISH
WALL MOUNTED TOILET SEAT BLACK FINISH
SUPPLIER newform N21 Art. 71720
IMAGE
SHELF DETAIL SECTION
7
BASIN DETAIL- SECTION & SIDE ELEVATION
COUNT
1
MIRROR newform Art. 885 External part. To combine with oncealed part 27852. SCARABEO
SHADOW GAP WITH PAINTED SOLID PEICE
1
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations. REVISION:
MIRROR
05
LED LINEAR PROFILE WITH DIFFUSER
04
1
Moon Wall-mounted WC 45 Moon CODE: 5524CL
03 02 01
TOILET FLUSH PLATE
TRASH BIN
FR-FI16
FR-AC02
WALL MOUNTED FLUSH PLATE
Newform DELTA ZERO
STAINLESS STEEL FINISH
Art. 887
FREE STANDING TRASH BIN
BY CONTRACTER
NO. DESCRIPTION
1
MR. MOHAMED FARUQE 8
OWNER
MIRROR DETAIL-SIDE&FLOOR DETAIL (FD04)
1
VILLA 123
BLACK FINISH
TOILET PAPER HOLDER
WALL MOUNTED PAPER FR-AC01 HOLDER
WASH BASIN
FR-FI07
PRESS-BUTTON FR-AC03 DRAIN
TOILET BRUSH
PROJECT
BY CONTRACTER
DUBAI
1 LOCATION
BLACK FINISH
FREE STANDING WASH BASIN ABK-SENSI-UP-MARQUINIA TILES FINISH
PRESS -BUTTON DRAIN BLACK FINISH
FR-AC04 WALL MOUNTED BRUSH BLACK FINISH
DATE
CUSTOM MADE REFER TO DRAWING newform BLINK Art. 230 1”1/4 press-button drain BY CONTRACTER
1
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
1
WOODEN SHELF
POWDER ROOM ENLARGMENT DETAILS
LED LINEAR PROFILE WITH DIFFUSER DRAWING TITLE
1
JULY 2023
ISSUE DATE
*** SAMPLES TO BE PROVIDED FOR CLIENT CONFIRMATION.
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
F.F.L
Arch. DINA HADDADIN
FD18 PAPER SIZE DRAWING SCALE
2
PARTITION DETAIL-ELEVATION
4
FIXTURES SCHEDULE 9
SHELF DETAIL-LIGHT DETAIL
A1
A.S
PROJECT No
SHEET No
IE-GF09-C
FOR TENDERING
GENERAL NOTES:
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations. REVISION: 05 04 03 02 01 NO. DESCRIPTION
DATE
MR. MOHAMED FARUQE OWNER
VILLA 123 PROJECT
DUBAI LOCATION
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
DRAWING TITLE
LIVING ROOM ENLARGMENT 3D SHOTS JULY 2023
ISSUE DATE
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
DESIGNED BY:
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-GF10-A
FOR TENDERING
DIMENSION LAYOUT LEGEND SYMBOL
DESCRIPTION CLEAR DIMENSION GYPSUM BOARD DIMENSION
1
DIMENSION PLAN
GENERAL NOTES:
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations. LOBBY 02 GF 10 REVISION: 05 04 03
ELEV 1
02 01 NO. DESCRIPTION
DATE
MR. MOHAMED FARUQE OWNER
VILLA 123 PROJECT
ELEV 2
DUBAI LOCATION
OPEN TO ABOVE
CONCEPT DESIGN PHASE
LIVING ROOM GF 11
SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE
OPEN TO SKY
CONSTRUCTION DRAWINGS PHASE
LIVING ROOM ENLARGMENT LAYOUTS
DRAWING TITLE
JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
2
ANNOTATION PLAN
A1
1:25
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-GF10-B
FOR TENDERING
F.C.L. +4.20 B.O.S. +4.42
LIGHTING LAYOUT LEGEND
F.C.L. +4.20 B.O.S. +4.42
F.C.L. +4.05 B.O.S. +4.42
CODE
SYMBOL
DESCRIPTION
LI01
HIDDEN LIGHT
LI02
SPOT LIGHT
LI07A
TRACK WITH LED LINEAR LIGHT
LI08
LINEAR LIGHT
F.C.L. +4.20 B.O.S. +4.42 F.C.L. +4.05 B.O.S. +4.42 F.C.L. +4.20 B.O.S. +4.42
1
REFLECTED CEILING PLAN
GENERAL NOTES:
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
LI01 LI07A LI01 LI07A
REVISION:
LI08
05 04 03 02 01 NO. DESCRIPTION
DATE
MR. MOHAMED FARUQE
LI02
LI02
LI02
OWNER
LI02
LI02
LI02
LI02
LI02
LI02
VILLA 123 PROJECT
DUBAI LOCATION
LI02
LI02
LI02
LI02
LI02
LI02
LI02
LI02
LI02
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
LIVING ROOM ENLARGMENT LAYOUTS
DRAWING TITLE
JULY 2023
LI07A
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
2
LIGHTING PLAN
A1
1:25
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-GF10-C
FOR TENDERING FURNITURE LAYOUT LEGEND CODE
DESCRIPTION
FR-S02
SOFA
FR-S04
SOFA
FR-S05
SOFA
FR-T05
TABLE
FR-T06
TABLE
T.V FR-T06
FLOORING LAYOUT LEGEND CODE
DESCRIPTION
SYMBOL
LEA CERAMICHESLIMTECH DELIGHT CALACATA ORO 120*120CM POLISHED.
TL-03 FR-T05
TL-07
GRAVEL
FR-S05
FR-S05
FR-S02 FR-S04
FURNITURE PLAN
GENERAL NOTES:
TL-07
1
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
TL-03 F.F.L. +0.45
F.F.L. +0.607 TL-03 F.F.L. +0.45
REVISION: 05 04 03 02 01 NO. DESCRIPTION
DATE
TL-03 F.F.L. +0.45
MR. MOHAMED FARUQE OWNER
VILLA 123 PROJECT
DUBAI LOCATION
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
LIVING ROOM ENLARGMENT LAYOUTS
TL-03 DRAWING TITLE
JULY 2023
F.F.L. +0.45
ISSUE DATE
SP DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
2
FLOORING PLAN
A1
1:25
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-GF10-D
FOR TENDERING
MATERIAL LEGEND MATERIAL
B.O.S +8.42
B.O.S +8.42
CODE
F.C.L +4.20
F.C.L +4.20
2
PAINT FINISH
F.C.L +4.05
F.C.L +4.05
8
DORICA AVORIO (120*280 CM )
23
LAMINATE WOOD TO MATCH DOORS FINISH
28
HPL WOODEN FLUTED PANELS
29
PAINTED IN BRASS FINISH -METAL INLAY
2
CD03 ID002
CD03 ID002
CD01 ID002
CD22 ID003 F
8 2
23
8
29
23
29
29
29
29
23 8
8
8
8
8
8 2
2
OPEN
70" TV DETAIL E
28
8 F.F.L +0.45
F.F.L +0.45
FD05 ID001
FD05 ID001
ELEVATION 01
1
2
PAINTED IN BRASS FINISH -METAL INLAY
ELEVATION 02
GENERAL NOTES:
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
DORICA AVORIO (120*280 CM )
REVISION: 05 04 03 02
DETAIL E
3
01 NO. DESCRIPTION
DATE
MR. MOHAMED FARUQE OWNER
VILLA 123 SECTION B
SECTION A
PROJECT
SECTION C
DUBAI LOCATION
DETAIL A CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
LIVING ROOM ENLARGMENT ELEVATIONS & DETAILS
DRAWING TITLE
JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
PAINT FINISH
WOODEN CUPBOARD
DORICA AVORIO (120*280 CM )
WOODEN CUPBOARD
DORICA AVORIO (120*280 CM )
8*8CM SUBFRAME
WOOD FINISH
2*2CM SUBFRAME
HIDDEN LIGHT WITH DIFFUSER
8*8CM SUBFRAME
DORICA AVORIO (120*280 CM )
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
4
TV.UNIT DETAIL-PLAN
A1
A.S
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-GF10-E
FOR TENDERING
HIDDEN LIGHT WITH DIFFUSER
DETAIL D
HIDDEN LIGHT WITH DIFFUSER
HIDDEN LIGHT WITH DIFFUSER
DORICA AVORIO (120*280 CM )
LAMINATE WOOD FINISH
WOOD FINISH
2*2CM SUBFRAME HIDDEN LIGHT WITH DIFFUSER
8*8CM SUBFRAME
DORICA AVORIO (120*280 CM ) 8*8CM SUBFRAME
8*8CM SUBFRAME
8*8CM SUBFRAME
HIDDEN LIGHT WITH DIFFUSER
LAMINATE WOODEN CUPBOARD DORICA AVORIO (120*280 CM )
DORICA AVORIO (120*280 CM )
2
TV UNIT DETAIL -DETAIL A
WOOD FINISH
DETAIL B
GENERAL NOTES:
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
DETAIL C
WOOD FINISH
WOOD FINISH
DORICA AVORIO (120*280 CM )
HIDDEN LIGHT WITH DIFFUSER
HIDDEN LIGHT WITH DIFFUSER
HIDDEN LIGHT WITH DIFFUSER
FLUTED WOOD FINISH
FLUTED WOOD FINISH
FLUTED WOOD FINISH GAS FIRE PLACE
DORICA AVORIO (120*280 CM )
DORICA AVORIO (120*280 CM )
DORICA AVORIO (120*280 CM )
REVISION: 05 04 03 02 01
SECTION B
SECTION A
SECTION C
NO. DESCRIPTION
DATE
DORICA AVORIO
1
TV UNIT DETAIL -SECTIONS A,B,C
MR. MOHAMED FARUQE HIDDEN LIGHT WITH DIFFUSER
OWNER
VILLA 123 PROJECT
HPL WOODEN FLUTED PANELS
DUBAI LOCATION
GAS FIREPLACE
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
DORICA AVORIO
LIVING ROOM ENLARGMENT DETAILS
DRAWING TITLE
JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
2CM SHADOW GAP
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
4
TV UNIT DETAIL -DETAIL C
5
TV UNIT DETAIL -DETAIL D
3
TV UNIT DETAIL -DETAIL B
A1
A.S
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-GF10-F
FOR TENDERING F.F.L. +0.45 TL-03 F.F.L. +0.607
DIMENSION LAYOUT LEGEND SYMBOL
DESCRIPTION CLEAR DIMENSION GYPSUM BOARD DIMENSION
SP
FLOORING LAYOUT LEGEND CODE
DESCRIPTION
SYMBOL
LEA CERAMICHESLIMTECH DELIGHT CALACATA ORO 120*120CM POLISHED.
TL-03
F.F.L. +0.45 TL-03
MATERIAL LEGEND ELEV 1
CODE
ELEV 2
MATERIAL
1
SENSI-UP-MARQUINIA SELECT(120*278 CM )
2
PAINT FINISH
8
DORICA AVORIO (120*280 CM )
F.F.L. +0.45 TL-07
LOBBY 03 GF 12
GENERAL NOTES:
F.F.L. +0.45 TL-03
1
DIMENSION PLAN
2
ANNOTATION PLAN
3
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations. REVISION:
FLOORING PLAN
05 04 03
B.O.S +8.42
02 01
F.C.L +4.15 F.C.L +4.05
NO. DESCRIPTION
DATE
MR. MOHAMED FARUQE
CD02 ID002
OWNER
VILLA 123 PROJECT
DUBAI LOCATION
1
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE OPEN
OPEN
DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
LOBBY 03 ENLARGMENT LAYOUTS&ELEVATIONS
DRAWING TITLE
JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
Arch. DINA HADDADIN
F.F.L +0.45
4
ELEVATION 01
PAPER SIZE DRAWING SCALE
FD07 ID001
A1 FD09
1:25
PROJECT No
SHEET No
IE-GF12-A
FOR TENDERING LIGHTING LAYOUT LEGEND LI07A
CODE
HIDDEN LIGHT WITH DIFFUSER
SYMBOL
DESCRIPTION
LI01 F.C.L. +4.05 B.O.S. +4.42
F.C.L. +4.15 B.O.S. +4.42
LI01
HIDDEN LIGHT
LI07A
TRACK WITH LED LINEAR LIGHT
F.C.L. +4.15 B.O.S. +4.42
MATERIAL LEGEND CODE
8*8CM SUBFRAME
MATERIAL
1
SENSI-UP-MARQUINIA SELECT(120*278 CM )
2
PAINT FINISH
8
DORICA AVORIO (120*280 CM )
DORICA AVORIO (120*280 CM )
F.C.L. +4.05 B.O.S. +4.42
GENERAL NOTES:
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
F.C.L. +4.15 B.O.S. +4.42 LI01
LI07A
F.C.L. +4.05 B.O.S. +4.42
F.C.L. +4.20 B.O.S. +4.42
LI01 F.C.L. +4.15 B.O.S. +4.42
1
REFLECTED CEILING PLAN
2
LIGHTING PLAN
3
REVISION:
SECTION DETAIL
05 04 03
B.O.S +8.42
02 SECTION DETAIL
01
F.C.L +4.15 F.C.L +4.05
NO. DESCRIPTION
CD02 ID002
DATE
MR. MOHAMED FARUQE OWNER
VILLA 123 PROJECT
DUBAI LOCATION
8
2
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE OPEN
OPEN
ELEVATOR
DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
LOBBY 03 ENLARGMENT LAYOUTS&ELEVATIONS
DRAWING TITLE
JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
Arch. DINA HADDADIN
F.F.L +0.45
4
FD07 ID001
ELEVATION 02 FD05
PAPER SIZE DRAWING SCALE
A1
A.S
PROJECT No
SHEET No
IE-GF12-B
FOR TENDERING LOBBY 04 GF 13
ELEV 1 ELEV 3 ELEV 2
1
DIMENSION PLAN
ANNOTATION PLAN
2
LI07A
F.C.L. +4.15 B.O.S. +4.42
LINTEL +4.12 LI01
LI07A F.C.L. +4.05 B.O.S. +4.42
F.C.L. +4.20 B.O.S. +4.42
LI01
F.C.L. +4.15 B.O.S. +4.42
3
LINTEL +4.12
LI01
LINTEL +4.12
REFLECTED CEILING PLAN
LIGHTING PLAN
3
TS CONTINUE WITH LOBBY 03 STARTING POINT F.F.L. +0.45 TL-03
FD07 ID001
TS
TS
0*278 CM )
5
FLOORING PLAN
CD05 ID002 B.O.S +8.42
CD03 ID002 B.O.S +8.42
F.C.L +4.20
B.O.S +8.42
F.C.L +4.20
F.C.L +4.05
F.C.L +4.05
CD03 ID002
CD02 ID002
GENERAL NOTES:
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
F.C.L +4.20
REVISION:
F.C.L +4.05
05 04
CD05 ID002
CD05 ID002
03 02 01 NO. DESCRIPTION
4 1
20
4
DATE
MR. MOHAMED FARUQE
20
OWNER
4
2
20
VILLA 123 PROJECT
OPEN
DUBAI
OPEN LOCATION
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
LOBBY 04 ENLARGMENT LAYOUTS&ELEVATIONS
DRAWING TITLE
F.F.L +0.45
F.F.L +0.45
F.F.L +0.45
JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
FD09 ID001
FD05 ID001
FD07 ID001
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
6
ELEVATION 01,02,03
Arch. DINA HADDADIN
FD07 ID001
A1
1:25
PROJECT No
SHEET No
IE-GF13-A
FOR TENDERING N
FURNITURE LAYOUT LEGEND FR-NS03 FR-NS04
ELEV 1 ELEV 4
CODE
DESCRIPTION
FR-S08
SOFA
FR-T11
TABLE
FR-BE02
BED
FR-FI01
WC
FR-FI06
HEAD SHOWER
FR-FI10
BIDET
FR-FI11
MASTER SINKS
FR-FI12
BATHTUB
FR-BE01
ELEV 2 ELEV 3
SHOWER
FR-FI18 FR-FI19
GUEST SUITE 01 ELEV 11 ELEV 14
GF
FR-FI16
14 FR-FI06
ELEV 12
GUEST SUITE 01 FR-AC02 FR-FI15 FR-AC04 FR-FI01 FR-AC01
ELEV 13
14
FLOORING LAYOUT LEGEND
ELEV 7 ELEV 10
GF
FR-AC05
CODE
ELEV 8
LEA CERAMICHE-BIOSELECT - OAK VANILLA 20*120cm NAT.
TL-01
ELEV 9
GUEST SUITE 01 BATHROOM GUEST SUITE 01 BATHROOM GF
DESCRIPTION
SYMBOL
GF
DESVRES ARIANA-DORICA GREIGE 120*120cm NAT.
TL-09
19
19
ELEV 6
FR-CH04 ELEV 5
TS
TRANSITION STRIP
FD
SHOWER FLOOR DRAIN
FR-FI09 FR-FI23
3 1
FURNITURE PLAN
ANNOTATION PLAN
GENERAL NOTES:
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations. REVISION: 05 04 03 02 01 NO. DESCRIPTION
DATE
GUEST SUITE 01 GUEST SUITE 01 GF
GF
FD
14
MR. MOHAMED FARUQE
14
F.F.L. +0.45
OWNER
TL-01
VILLA 123
SHOWER
PROJECT
SHOWER
DUBAI LOCATION
GUEST SUITE 01 BATHROOM GF
CONCEPT DESIGN PHASE
19
SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE
F.F.L. +0.45 TL-09
CONSTRUCTION DRAWINGS PHASE
TS
DRAWING TITLE
TS
SP
GUEST SUITE 01 ENLARGEMENT PLANS JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
2
DIMENSIONS PLAN 4
Arch. DINA HADDADIN
FLOORING PLAN PAPER SIZE DRAWING SCALE
A1
1:25
PROJECT No
SHEET No
IE-GF14-A
FOR TENDERING F.C.L. +4.20 B.O.S. +4.42
REFLECTED CEILING PLAN LEGEND HATCH
DESCRIPTION F.C.L. +4.05 B.O.S. +4.42
LINTEL
F.C.L. +3.45 B.O.S. +4.42 F.C.L. +4.05 B.O.S. +4.42
F.C.L. +3.55 B.O.S. +4.42
LIGHTING LAYOUT LEGEND CODE
F.C.L. +4.20 B.O.S. +4.42
SHOWER
F.C.L. +3.45 B.O.S. +4.42
SYMBOL
DESCRIPTION
LI01
HIDDEN LIGHT
LI02
SPOT LIGHT
LI07C
TRACK WITH DIRECTIONAL PROJECTOR LIGHT
LI19
NIGHT STAND PENDANT LIGHT
LI12
WALL MOUNTED SPOTLIGHT
F.C.L. +3.55 B.O.S. +4.42 LINTEL +4.12 F.C.L. +4.20 B.O.S. +4.42
1
REFLECTED CEILING PLAN
GENERAL NOTES:
LI01 LI13
LI07C
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations. REVISION: 05 04
LI02 LI02
03
LI02 LI02
02 01 NO. DESCRIPTION
DATE
MR. MOHAMED FARUQE
LI01
OWNER
LI02 LI02
VILLA 123
LI02 LI02 PROJECT
LI02
LI02
DUBAI LOCATION
LI02 LI02
LI02 LI02
LI07C
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
LI11 DRAWING TITLE
LI01 LI02 LI02
LI02 LI02 LI01
GUEST SUITE 01 ENLARGEMENT R.C.P & LIGHTING PLAN JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
2
Arch. DINA HADDADIN
LIGHTING PLAN PAPER SIZE DRAWING SCALE
A1
1:25
PROJECT No
SHEET No
IE-GF14-B
FOR TENDERING
FIXTURE
CODE
BASIN FAUCET FR-FI23 AND MIXER
DESCRIPTION
SUPPLIER
FREE STANDING FAUCET WITH MIXER BLACK FINISH
newform MINI-X Art. 61310 Single-lever basin mixer
SAMPLE TO BE PROVIDED FOR CLIENT CONFIRMATION HAND BIDET MIXER
HAND HELD BIDET
TOILET SEAT
TOILET FLUSH PLATE
TRASH BIN
FR-FI15
FR-FI01
FR-FI16
FR-AC02
COUNT
1
newform Art. 885
BLACK FINISH
External part. To combine with oncealed part 27852.
WALL MOUNTED TOILET SEAT
SCARABEO
BLACK FINISH
Moon Wall-mounted WC 45 Moon CODE: 5524CL
WALL MOUNTED FLUSH PLATE
Newform DELTA ZERO
STAINLESS STEEL FINISH
Art. 887
FREE STANDING TRASH BIN
IMAGE
1
1
1
BY CONTRACTER
1
BY CONTRACTER
1
BLACK FINISH
TOILET PAPER HOLDER
WALL MOUNTED PAPER HOLDER FR-AC01 BLACK FINISH
GENERAL NOTES:
FREE STANDING WASH BASIN
FR-FI09
PRESS-BUTTON FR-AC03 DRAIN
TOILET BRUSH
HEAD SHOWER
SCARABEO BLACK OVAL WASH BASIN
PRESS -BUTTON DRAIN BLACK FINISH
FR-AC04 WALL MOUNTED BRUSH BLACK FINISH
FR-FI06
WALL MOUNTED HEAD SHOWER BLACK FINISH
1 CODE: 8111 newform BLINK Art. 230 1”1/4 press-button drain
1
BY CONTRACTER
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
newform REVISION:
Art. 26534 OR EQUIVALENT
1
05 04 03 02
HAND SHOWER
WALL MOUNTED
newform
BLACK HAND SHOWER
CODE: Art. 823
FR-FI18
01
1
NO. DESCRIPTION
DATE
MR. MOHAMED FARUQE OWNER
SHOWER MIXER
WALL MOUNTED FR-FI19
newform Art. 67688E
VILLA 123 1
PROJECT
BLACK SHOWER MIXER
DUBAI LOCATION
TOWEL HOOK
FR-AC05
WALL MOUNTED TOWEL HOOK BLACK FINISH
BY CONTRACTER
1 CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE
TOWEL STORAGE
WALL MOUNTED FR-AC06 BLACK TOWEL STORAGE
CONSTRUCTION DRAWINGS PHASE
BY CONTRACTER
1
GUEST SUITE 01 ENLARGEMENT BATHROOM FIXTURES SCHEDULE
DRAWING TITLE
*** SAMPLES TO BE PROVIDED FOR CLIENT CONFIRMATION.
JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
-
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-GF14-C
FOR TENDERING CD05 ID002
CD02 ID002
CD26 ID004
CD26 ID004
CD02 ID002
B.O.S +4.42
B.O.S +4.42
B.O.S +4.42
F.C.L +4.20
F.C.L +4.20
F.C.L +4.20
F.C.L +4.05
F.C.L +4.05
F.C.L +4.05
MATERIAL LEGEND CODE
MATERIAL
2
PAINT FINISH
4
WOOD FINISH TYPE 1
9
MIRROR
10
STONE
12
ABK SENSI SIGNORIA CALACATTA VENA ORO (120X280)
18
DORICA GREIGE TILE (120x280)
19
LAMINATE WOOD TYPE 1
20
WOOD VENEER TO MATCH DOORS
23
LAMINATE WOOD TO MATCH DOORS FINISH
26
OPAQUE GLASS
27
LAMINATE WOOD TYPE 2
F.C.L +3.45 2
23
12
12
12
23
23
4
20
19
12 2
2
2
50" TV
FD10 ID001
FD07 ID001
FD05 ID001
20
F.F.L +0.45
F.F.L +0.45
F.F.L +0.45
1
ELEVATION 01
ELEVATION 02
2
3
ELEVATION 03
GENERAL NOTES:
CD26 ID004
CD02 ID002
CD02 ID002
B.O.S +4.42
B.O.S +4.42
B.O.S +4.42
F.C.L +4.20 F.C.L +4.15 F.C.L +4.05
F.C.L +4.15 F.C.L +4.05
F.C.L +4.05
19
19
19
19
19
19
19
F.C.L +3.45
19
19
19
19
19
19
19 F.
F.
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations. REVISION: 05 04 03 02
23 20
19
19
19
19
19
19
19
23
23
19
4
9
19
23
19
19
19
19
F.
19
19
19
01
F.
NO. DESCRIPTION
DATE
MR. MOHAMED FARUQE OWNER
VILLA 123 PROJECT
DUBAI LOCATION
DWR DWR DWR
DWR DWR DWR
DWR
DWR
DWR
DWR
FD10 ID001
F.F.L +0.45
F.F.L +0.45
DWR
DWR
DRAWER
20 DRAWER
DRAWER
20 DRAWER
F.F.L +0.45
DWR DWR DWR
DWR DWR DWR
DWR
DWR
DWR
DWR
DWR
DWR
FD07 ID001 CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
DRAWING TITLE
4
ELEVATION 04
5
ELEVATION 05
6
ELEVATION 06
GUEST SUITE 01 ENLARGEMENT INTERIOR ELEVATIONS JULY 2023
ISSUE DATE
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1 1:25
DESIGNED BY:
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-GF14-D
FOR TENDERING CD01 ID002
CD05 ID002
CD05 ID002
CD01 ID002
CD01 ID002
CD01 ID002
B.O.S +4.42
B.O.S +4.42
B.O.S +4.42
B.O.S +4.42
F.C.L +4.05
F.C.L +4.05
MATERIAL LEGEND CODE
F.C.L +3.55 F.C.L +3.45
F.C.L +3.45
F.C.L +3.55 F.C.L +3.45
F.C.L +3.55 F.C.L +3.45
MATERIAL
2
PAINT FINISH
4
WOOD FINISH TYPE 1
9
MIRROR
10
STONE
12
ABK SENSI SIGNORIA CALACATTA VENA ORO (120X280)
18
DORICA GREIGE TILE (120x280)
19
LAMINATE WOOD TYPE 1
20
WOOD VENEER TO MATCH DOORS
23
LAMINATE WOOD TO MATCH DOORS FINISH
26
OPAQUE GLASS
27
LAMINATE WOOD TYPE 2
26 F.
26 F.
26 F.
9 18
26 F.
18
FR-AC05 19
18 18
18
18
FR-AC06
9
18
26 F.
FR-FI23 FR-FI23 26
FR-FI23 FR-FI09
FR-FI16
FR-FI09 FR-FI09
FR-FI15
DRAWER
FR-AC01 FR-FI01
FD02 ID001
DRAWER
18 DRAWER
18 DRAWER
DRAWER
27 DRAWER
27 DRAWER
FD02 ID001
FR-FI01
FR-FI01 DRAWER
F.F.L +0.45
F.F.L +0.45
F.F.L +0.45
7
ELEVATION 07
F.F.L +0.45
8
ELEVATION 08
18
9
ELEVATION 09
10
ELEVATION 10
GENERAL NOTES:
CD01 ID002
CD05 ID002 B.O.S +4.42
B.O.S +4.42 B.O.S +4.42
B.O.S +4.42
F.C.L +3.45
F.C.L +3.55 F.C.L +3.45
F.C.L +3.55 F.C.L +3.45
F.C.L +3.45
CD01 ID002
CD05 ID002
FR-FI06
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
FR-FI06 FR-FI06 REVISION: 05
26 F.
04 03
26 F.
26 F.
02 01 NO. DESCRIPTION
18
DATE
26 26
F.
MR. MOHAMED FARUQE
18
26
OWNER
F.
FR-FI18
VILLA 123 PROJECT
FR-FI19
FD02 ID001
DUBAI FD06 ID001
LOCATION
FD02 ID001
FD02 ID001
CONCEPT DESIGN PHASE F.F.L +0.45
F.F.L +0.45
SCHEMATIC DESIGN PHASE
F.F.L +0.45
F.F.L +0.45
DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
DRAWING TITLE
11
ELEVATION 11
12
ELEVATION 12
13
ELEVATION 13
14
ELEVATION 14
GUEST SUITE 01 ENLARGEMENT INTERIOR ELEVATIONS JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
1:25
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-GF14-E
FOR TENDERING TO MATCH BATHROOM TILE
DORICA AVORIO TILE 120x280CM
HIDDEN LIGHT WITH DIFFUSER
TO MATCH BATHROOM TILE
TO MATCH BATHROOM TILE LAMINATE WOODEN DRAWERS
LAMINATE WOODEN DRAWERS DETAIL A HIDDEN LIGHT WITH DIFFUSER
1
DETAIL B
DETAILS A & B
PORCELAIN SHELF TO MATCH DORICA AVORIO TILE
GENERAL NOTES:
2
DETAIL C
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
DETAIL A
HIDDEN LIGHT WITH DIFFUSER MIRROR
MIRROR
REVISION: 05
FR-AC06
04 03 02 01 NO. DESCRIPTION
FR-FI23
MR. MOHAMED FARUQE
PORCELAIN SHELF TO MATCH BATHROOM TILE
FR-FI23
OWNER
VILLA 123
FR-FI09
FR-FI09
DATE
PROJECT
DETAIL A
DUBAI LOCATION
DRAWER
DRAWER
DRAWER
DETAIL C
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
DRAWER
DRAWER
DRAWER
GUEST SUITE 01 ENLARGEMENT DETAILS 1
DRAWING TITLE
JULY 2023
ISSUE DATE
DETAIL B DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
3
BATHROOM SINK ELEVATION
4
BATHROOM SINK SECTION
5
SHOWER NICHE ELEVATION
6
SHOWER NICHE SECTION
PAPER SIZE DRAWING SCALE
A1
A.S
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-GF14-F
FOR TENDERING
DESK
CABLE MANAGEMENT OPENING
DESK
MIRROR
DRAWER
GENERAL NOTES:
DRAWER
DETAIL D
DESK
DETAIL D DRAWER
DRAWER
3
DETAIL C
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations. REVISION:
DRAWER DRAWER
05 04 03 02 01 NO. DESCRIPTION
DATE
MR. MOHAMED FARUQE ELEVATION
1
2
OWNER
SECTION
VILLA 123 PROJECT
DUBAI
2x2 cm SUBSTRUCTURE
LOCATION
CONCEPT DESIGN PHASE
4
WALL DETAIL 1
SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE
5mm GROOVE
ABK SENSI SIGNORIA CALACATTA VENA ORO (120X280)
U-CHANNEL POWDER COATED (BLACK FINISH)
ABK SENSI SIGNORIA CALACATTA VENA ORO (120X280)
U-CHANNEL POWDER COATED (BLACK FINISH)
ABK SENSI SIGNORIA CALACATTA VENA ORO (120X280)
U-CHANNEL POWDER COATED (BLACK FINISH)
ABK SENSI SIGNORIA CALACATTA VENA ORO (120X280)
CONSTRUCTION DRAWINGS PHASE
5mm GROOVE
GUEST SUITE 01 ENLARGEMENT DETAILS 2
DRAWING TITLE
JULY 2023
ISSUE DATE
WOOD
MIRROR
WOOD DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
5
Arch. DINA HADDADIN
WALL DETAIL 2
2x2 cm SUBSTRUCTURE
PAPER SIZE DRAWING SCALE
3x3 cm SUBSTRUCTURE
A1
A.S
PROJECT No
SHEET No
IE-GF14-G
FOR TENDERING
FURNITURE LAYOUT LEGEND CODE
DESCRIPTION
FR-S08
SOFA
FR-T11
TABLE
FR-BE02
BED
FR-FI01
WC
FR-FI01
FR-FI06
HEAD SHOWER
FR-FI15
FR-FI10
BIDET
FR-FI11
MASTER SINKS
FR-FI12
BATHTUB
FR-AC02 FR-AC01
N
FR-FI16
ELEV 5 ELEV 8
FR-AC04 ELEV 6
ELEV 7
FR-FI09
GUEST SUITE 02 BATHROOM GUEST SUITE 02 BATHROOM GF
GF
GUEST SUITE 02 BATHROOM
18
GF
18
18
FR-FI23
FR-AC05 SHOWER SHOWER
ELEV 9
FR-FI06
SHOWER ELEV 10
FR-FI18 FR-FI19
GENERAL NOTES:
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
ELEV 4 ELEV 3
ELEV 1 ELEV 2
50" TV GUEST SUITE 02 GF
GUEST SUITE 02
15
GF
FR-BE01
15
GUEST SUITE 02 GF
15
REVISION: 05
FR-CH04
FR-NS04
04 03 02 01 NO. DESCRIPTION
DATE
MR. MOHAMED FARUQE
LI01 OWNER
1
ANNOTATION PLAN
2
DIMENSIONS PLAN
3
FURNITURE PLAN
VILLA 123 PROJECT
DUBAI LOCATION
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
DRAWING TITLE
GUEST SUITE 02 ENLARGEMENT PLANS JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
1:25
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-GF15-A
FOR TENDERING FLOORING LAYOUT LEGEND CODE
SYMBOL
LEA CERAMICHE-BIOSELECT - OAK VANILLA 20*120cm NAT.
TL-01
DESVRES ARIANA-DORICA GREIGE 120*120cm NAT.
TL-09
SP
DESCRIPTION
TS
TRANSITION STRIP
FD
SHOWER FLOOR DRAIN
LI01 F.C.L. +3.55 B.O.S. +4.42 LI02
F.C.L. +4.20 B.O.S. +4.42
LI02
TS
LI07C
TS
LIGHTING LAYOUT LEGEND
LI11
CODE
SYMBOL
DESCRIPTION
LI02
LI01
HIDDEN LIGHT
LI02
LI02
SPOT LIGHT
LI07C
TRACK WITH DIRECTIONAL PROJECTOR LIGHT
F.F.L. +0.45 LINTEL B.O.S. +3.52
TL-09
F.C.L. +3.45 B.O.S. +4.42
F.C.L. +3.60 B.O.S. +4.42
LI01 F.C.L. +4.05 B.O.S. +4.42
F.C.L. +3.55 B.O.S. +4.42
LI02
LI19
NIGHT STAND PENDANT LIGHT
LI12
WALL MOUNTED SPOTLIGHT
FD LI02
F.C.L. +3.45 B.O.S. +4.42
LI01 SP LI07C
LI01 LI02 F.C.L. +4.20 B.O.S. +4.42
LI13
LI02 GENERAL NOTES:
GUEST SUITE 02 GF
15 GUEST SUITE 02
F.F.L. +0.45
GF
TL-01 F.C.L. +4.15 B.O.S. +4.42
LI02
15
F.C.L. +4.05 B.O.S. +4.42
LI02
LI02 LI12 LI02 LI12
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations. REVISION:
LI01 F.C.L. +4.20 B.O.S. +4.42
LI07C
LI07C
05 04 03 02 01 NO. DESCRIPTION
1
FLOORING PLAN
2
REFLECTED CEILING PLAN
3
LIGHTING PLAN
DATE
MR. MOHAMED FARUQE OWNER
VILLA 123 PROJECT
DUBAI LOCATION
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
DRAWING TITLE
GUEST SUITE 02 ENLARGEMENT PLANS JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
1:25
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-GF15-B
FOR TENDERING
FIXTURE
CODE
BASIN FAUCET FR-FI23 AND MIXER
DESCRIPTION
SUPPLIER
FREE STANDING FAUCET WITH MIXER BLACK FINISH
newform MINI-X Art. 61310 Single-lever basin mixer
SAMPLE TO BE PROVIDED FOR CLIENT CONFIRMATION HAND BIDET MIXER
HAND HELD BIDET
TOILET SEAT
TOILET FLUSH PLATE
TRASH BIN
FR-FI15
FR-FI01
FR-FI16
FR-AC02
COUNT
1
newform Art. 885
BLACK FINISH
External part. To combine with oncealed part 27852.
WALL MOUNTED TOILET SEAT
SCARABEO
BLACK FINISH
Moon Wall-mounted WC 45 Moon CODE: 5524CL
WALL MOUNTED FLUSH PLATE
Newform DELTA ZERO
STAINLESS STEEL FINISH
Art. 887
FREE STANDING TRASH BIN
IMAGE
1
1
1
BY CONTRACTER
1
BY CONTRACTER
1
BLACK FINISH
TOILET PAPER HOLDER
WALL MOUNTED PAPER HOLDER FR-AC01 BLACK FINISH
GENERAL NOTES:
FREE STANDING WASH BASIN
FR-FI09
PRESS-BUTTON FR-AC03 DRAIN
TOILET BRUSH
HEAD SHOWER
SCARABEO BLACK OVAL WASH BASIN
PRESS -BUTTON DRAIN BLACK FINISH
FR-AC04 WALL MOUNTED BRUSH BLACK FINISH
FR-FI06
WALL MOUNTED HEAD SHOWER BLACK FINISH
1 CODE: 8111 newform BLINK Art. 230 1”1/4 press-button drain
1
BY CONTRACTER
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
newform REVISION:
Art. 26534 OR EQUIVALENT
1
05 04 03 02
HAND SHOWER
WALL MOUNTED
newform
BLACK HAND SHOWER
CODE: Art. 823
FR-FI18
01
1
NO. DESCRIPTION
DATE
MR. MOHAMED FARUQE OWNER
SHOWER MIXER
WALL MOUNTED FR-FI19
newform Art. 67688E
VILLA 123 1
PROJECT
BLACK SHOWER MIXER
DUBAI LOCATION
TOWEL HOOK
FR-AC05
WALL MOUNTED TOWEL HOOK BLACK FINISH
BY CONTRACTER
1 CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE
TOWEL STORAGE
WALL MOUNTED FR-AC06 BLACK TOWEL STORAGE
CONSTRUCTION DRAWINGS PHASE
BY CONTRACTER
1
GUEST SUITE 02 ENLARGEMENT BATHROOM FIXTURES SCHEDULE
DRAWING TITLE
*** SAMPLES TO BE PROVIDED FOR CLIENT CONFIRMATION.
JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
-
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-GF15-C
FOR TENDERING MATERIAL LEGEND CODE
CD26 ID004
CD03 ID002
CD02 ID002
MATERIAL
2
PAINT FINISH
4
WOOD TYPE 1
9
MIRROR
10
STONE
12
ABK SENSI SIGNORIA CALACATTA VENA ORO (120X280)
15
DARK TINTED GLASS
18
DORICA GREIGE TILE (120x280)
19
LAMINATE WOOD TYPE 1
20
WOOD VENEER
23
LAMINATE WOOD TO MATCH DOORS FINISH
26
OPAQUE GLASS
27
LAMINATE WOOD TYPE 2
28
FLUTED WOOD
30
WOOD VENEER TYPE 2
B.O.S +4.42 F.C.L +4.20 F.C.L +4.05
28 15
15
2
2
18
2
18
FD07 ID001
18
F.F.L +0.45
1
ELEVATION 02
2
ELEVATION 01
GENERAL NOTES:
CD26 ID004
CD02 ID002
CD31 ID004
B.O.S +4.42 B.O.S +4.42 F.C.L +4.20 F.C.L +4.20 F.C.L +4.05 F.C.L +4.05
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations. REVISION: 05 04 03
19 2
9
23
23
23
23
19
19
19
19
19
4
02
2
01
20 F.
NO. DESCRIPTION
DATE
MR. MOHAMED FARUQE 15
OWNER
VILLA 123 PROJECT
50" TV
DUBAI LOCATION
18 30 DRAWER
30 DRAWER
30 DRAWER
DWR DWR DWR
DWR DWR DWR
DWR
DWR
DWR
DWR
DWR
DWR
FD07 ID001 20
23
SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE
F.F.L +0.45 F.F.L +0.45
CONCEPT DESIGN PHASE
CONSTRUCTION DRAWINGS PHASE
DRAWING TITLE
3
ELEVATION 03
4
ELEVATION 04
GUEST SUITE 02 ENLARGEMENT INTERIOR ELEVATIONS JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
1:25
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-GF15-D
FOR TENDERING CD32 ID004
CD01 ID002
CD01 ID002
CD01 ID002
CD05 ID002
B.O.S +4.42
B.O.S +4.42
F.C.L +3.55 F.C.L +3.45
MATERIAL LEGEND CODE
B.O.S +4.42
B.O.S +4.42
F.C.L +3.55 F.C.L +3.45
CD05 ID002
MATERIAL
2
PAINT FINISH
4
WOOD TYPE 1
9
MIRROR
10
STONE
12
ABK SENSI SIGNORIA CALACATTA VENA ORO (120X280)
15
DARK TINTED GLASS
18
DORICA GREIGE TILE (120x280)
19
LAMINATE WOOD TYPE 1
20
WOOD VENEER
23
LAMINATE WOOD TO MATCH DOORS FINISH
26
OPAQUE GLASS
27
LAMINATE WOOD TYPE 2
28
FLUTED WOOD
F.C.L +3.55 F.C.L +3.45
F.C.L +3.55 F.C.L +3.45
FR-FI06
26 F.
26 F.
9
15
18
15
18
FR-AC06
FR-AC06
18
26 F.
FR-AC05
26
FR-FI23
18 FR-FI18
FR-FI09
18 DRAWER
DRAWER
18 DRAWER
18
FD02 ID001
18 DRAWER
FR-FI01 DRAWER
27 DRAWER
27 DRAWER
FR-FI23 FR-FI09
DRAWER
FR-FI16 FR-FI19
FD02 ID001
FR-FI15
FR-AC01 FR-FI01
18 BENCH
27 DRAWER
DRAWER 18
18
F.F.L +0.45
F.F.L +0.45
F.F.L +0.45
F.F.L +0.45
5
ELEVATION 05
ELEVATION 06
6
7
ELEVATION 07
8
ELEVATION 08
GENERAL NOTES:
CD26 ID004
CD05 ID002
B.O.S +4.42 B.O.S +4.42
F.C.L +3.55 F.C.L +3.45
F.C.L +3.55 F.C.L +3.45
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations. REVISION: 05 04 03 02 01
26 F.
26 F.
NO. DESCRIPTION
DATE
MR. MOHAMED FARUQE OWNER
18 15
26
VILLA 123 18
PROJECT
26
DUBAI
F.
LOCATION
FD02 ID001
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE
F.F.L +0.45 F.F.L +0.45
CONSTRUCTION DRAWINGS PHASE
DRAWING TITLE
GUEST SUITE 02 ENLARGEMENT INTERIOR ELEVATIONS JULY 2023
ISSUE DATE
9
ELEVATION 09
10
ELEVATION 10 DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
1:25
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-GF15-E
TO MATCH BATHROOM TILE
FOR TENDERING DORICA GREIGE TILE 120x280CM
HIDDEN LIGHT WITH DIFFUSER
TO MATCH BATHROOM TILE
TO MATCH BATHROOM TILE LAMINATE WOODEN DRAWERS
LAMINATE WOODEN DRAWERS DETAIL A HIDDEN LIGHT WITH DIFFUSER
1
DETAIL B
DETAILS A & B
PORCELAIN SHELF TO MATCH DORICA AVORIO TILE
GENERAL NOTES:
2
DETAIL C
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
DETAIL A
HIDDEN LIGHT WITH DIFFUSER
MIRROR
REVISION:
FR-AC06
05
MIRROR
04 03 02 01 NO. DESCRIPTION
MR. MOHAMED FARUQE
PORCELAIN SHELF TO MATCH BATHROOM TILE
FR-FI23
DATE
OWNER
FR-FI23
VILLA 123 PROJECT
FR-FI09
DETAIL A
FR-FI09
DUBAI
DETAIL A
DRAWER
DRAWER
LOCATION
DETAIL C
DRAWER
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE
DRAWER
DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
DRAWER
DRAWER
DRAWER DRAWER
GUEST SUITE 02 ENLARGEMENT DETAILS 1
DRAWING TITLE
JULY 2023
ISSUE DATE
3
Arch. DALIA RAWABDEH
5
BATHROOM SINK ELEVATION 4
BATHROOM SINK SECTION
DESIGNED BY:
DRAWN BY:
DETAIL B
SHOWER NICHE ELEVATION
6
SHOWER NICHE SECTION
PAPER SIZE DRAWING SCALE
A1
A.S
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-GF15-F
FOR TENDERING DESK
CABLE MANAGEMENT OPENING
WOOD VENEER TO MATCH WOODEN CLADDING
DESK
WOOD VENEER TO MATCH WOODEN CLADDING DRAWER
DETAIL D
DETAIL C
3
MIRROR
20mm CLADDING 10mm CEMENT BOARD 40Xx40mm SUBSTRUCTURE 50" TV
GENERAL NOTES:
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
DETAIL D
DESK
DESK
DRAWER
DRAWER
DRAWER
DRAWER
REVISION: 05 04 03 02
4 1
ELEVATION 2
DETAIL D - BUILT-IN BENCH DETAIL
DETAIL E
01 NO. DESCRIPTION
DATE
SECTION
MR. MOHAMED FARUQE OWNER
VILLA 123
2x2 cm SUBSTRUCTURE
PROJECT
DUBAI LOCATION
5
WALL DETAIL 1
CONCEPT DESIGN PHASE
5mm GROOVE
ABK SENSI SIGNORIA CALACATTA VENA ORO (120X280)
U-CHANNEL POWDER COATED (BLACK FINISH)
FLUTED WOOD HUNG ABOVE
ABK SENSI SIGNORIA CALACATTA VENA ORO (120X280)
U-CHANNEL POWDER COATED (BLACK FINISH)
ABK SENSI SIGNORIA CALACATTA VENA ORO (120X280)
5mm GROOVE
SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
GUEST SUITE 02 ENLARGEMENT DETAILS 2
DRAWING TITLE
WOOD
WOOD
WOOD
WOOD
MIRROR
JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
6
WALL DETAIL 2
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
2x2 cm SUBSTRUCTURE
3x3 cm SUBSTRUCTURE
A1
A.S
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-GF15-G
FOR TENDERING
FURNITURE LAYOUT LEGEND CODE
DESCRIPTION
FR-S08
SOFA
FR-T11
TABLE
FR-BE02
BED
FR-FI01
WC
FR-FI06
HEAD SHOWER
FR-FI10
BIDET
FR-FI11
MASTER SINKS
FR-FI12
BATHTUB
GENERAL NOTES:
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations. REVISION: 05 04 03 02 01 NO. DESCRIPTION
DATE
MR. MOHAMED FARUQE OWNER
VILLA 123 PROJECT
DUBAI LOCATION
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
DRAWING TITLE
GUEST SUITE 03 ENLARGEMENT RENDER JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
1:25
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-GF16-0
FOR TENDERING
FURNITURE LAYOUT LEGEND
WC
FR-FI18 FR-FI19
FR-AC04
SHOWER
N
CODE
DESCRIPTION
FR-S08
SOFA
FR-T11
TABLE
FR-BE02
BED
FR-FI01
WC
FR-FI06
HEAD SHOWER
FR-FI10
BIDET
FR-FI11
MASTER SINKS
FR-FI12
BATHTUB
FR-FI15
ELEV 12
ELEV 9
ELEV 13
FR-FI16 WC
ELEV 10
ELEV 14
FR-FI01
SHOWER
FR-FI06
WC ELEV 11
SHOWER
FR-AC02 FR-AC01
FR-AC05
ELEV 5 ELEV 8
ELEV 6 ELEV 7
GUEST SUITE 03 BATHROOM
GUEST SUITE 03 BATHROOM GF
GF
17
GUEST SUITE 03 BATHROOM
17
GF
17
FR-FI09 FR-FI23
FR-NS04 GENERAL NOTES:
GUEST SUITE 03 GF
16
ELEV 2 ELEV 1
ELEV 3
GUEST SUITE 03 GF
ELEV 4
16
FR-BE01
50" TV
GUEST SUITE 03 GF
16
FR-NS03
FR-CH04
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations. REVISION: 05 04 03 02 01 NO. DESCRIPTION
DATE
MR. MOHAMED FARUQE OWNER
1
ANNOTATION PLAN
2
DIMENSIONS PLAN
3
FURNITURE PLAN
VILLA 123 PROJECT
DUBAI LOCATION
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
DRAWING TITLE
GUEST SUITE 03 ENLARGEMENT PLANS JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
1:25
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-GF16-A
FOR TENDERING
FLOORING LAYOUT LEGEND CODE
SYMBOL
LEA CERAMICHE-BIOSELECT - OAK VANILLA 20*120cm NAT.
TL-01
DESVRES ARIANA-DORICA GREIGE 120*120cm NAT.
TL-09
LINTEL B.O.S. +4.12
TS
TS
TRANSITION STRIP
FD
SHOWER FLOOR DRAIN
LI07C FD
LI01
F.C.L. +3.55 B.O.S. +4.42
WC
SHOWER
F.F.L. +0.45
F.F.L. +0.45
TL-09
TL-09
WC SHOWER
SHOWER F.C.L. +3.45 B.O.S. +4.42
WC F.C.L. +3.45 B.O.S. +4.42
LIGHTING LAYOUT LEGEND LI02
CODE
LI02
F.C.L. +3.55 B.O.S. +4.42
SP
DESCRIPTION
SYMBOL
DESCRIPTION
LI01
HIDDEN LIGHT
LI02
SPOT LIGHT
LI07C
TRACK WITH DIRECTIONAL PROJECTOR LIGHT
LI01
SP
GF
19
LI02 LI02
LI02 LI02
F.C.L. +4.05 B.O.S. +4.42
GUEST SUITE 01 BATHROOM F.C.L. +3.45 B.O.S. +4.42
F.F.L. +0.45
LI02 LI02
LI19
NIGHT STAND PENDANT LIGHT
LI12
WALL MOUNTED SPOTLIGHT
GUEST SUITE 03 BATHROOM GF
TL-09
17
TS LI11 LI01 F.C.L. +3.55 B.O.S. +4.42
LI01
LI12
LI02
LI01
LI02 LI12 GUEST SUITE 03 GF
GUEST SUITE 03
16
GF
F.F.L. +0.45 TL-01
16 GENERAL NOTES:
LI02 GUEST SUITE 03 GF
LI02
16
F.C.L. +4.05 B.O.S. +4.42
LI02 LI02 F.C.L. +4.20 B.O.S. +4.42 F.C.L. +4.20 B.O.S. +4.42
LI07C LI13 F.C.L. +4.20 B.O.S. +4.42
LI07C
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations. REVISION: 05 04 03
1
FLOORING PLAN
2
REFLECTED CEILING PLAN
3
LIGHTING PLAN
02 01 NO. DESCRIPTION
DATE
MR. MOHAMED FARUQE OWNER
VILLA 123 PROJECT
DUBAI LOCATION
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
DRAWING TITLE
GUEST SUITE 03 ENLARGEMENT PLANS JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
1:25
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-GF16-B
FOR TENDERING
FIXTURE
CODE
BASIN FAUCET FR-FI23 AND MIXER
DESCRIPTION
SUPPLIER
FREE STANDING FAUCET WITH MIXER BLACK FINISH
newform MINI-X Art. 61310 Single-lever basin mixer
SAMPLE TO BE PROVIDED FOR CLIENT CONFIRMATION HAND BIDET MIXER
HAND HELD BIDET
TOILET SEAT
TOILET FLUSH PLATE
TRASH BIN
FR-FI15
FR-FI01
FR-FI16
FR-AC02
COUNT
1
newform Art. 885
BLACK FINISH
External part. To combine with oncealed part 27852.
WALL MOUNTED TOILET SEAT
SCARABEO
BLACK FINISH
Moon Wall-mounted WC 45 Moon CODE: 5524CL
WALL MOUNTED FLUSH PLATE
Newform DELTA ZERO
STAINLESS STEEL FINISH
Art. 887
FREE STANDING TRASH BIN
IMAGE
1
1
1
BY CONTRACTER
1
BY CONTRACTER
1
BLACK FINISH
TOILET PAPER HOLDER
WALL MOUNTED PAPER HOLDER FR-AC01 BLACK FINISH
GENERAL NOTES:
FREE STANDING WASH BASIN
FR-FI09
PRESS-BUTTON FR-AC03 DRAIN
TOILET BRUSH
HEAD SHOWER
SCARABEO BLACK OVAL WASH BASIN
PRESS -BUTTON DRAIN BLACK FINISH
FR-AC04 WALL MOUNTED BRUSH BLACK FINISH
FR-FI06
WALL MOUNTED HEAD SHOWER BLACK FINISH
1 CODE: 8111 newform BLINK Art. 230 1”1/4 press-button drain
1
BY CONTRACTER
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
newform REVISION:
Art. 26534 OR EQUIVALENT
1
05 04 03 02
HAND SHOWER
WALL MOUNTED
newform
BLACK HAND SHOWER
CODE: Art. 823
FR-FI18
01
1
NO. DESCRIPTION
DATE
MR. MOHAMED FARUQE OWNER
SHOWER MIXER
WALL MOUNTED FR-FI19
newform Art. 67688E
VILLA 123 1
PROJECT
BLACK SHOWER MIXER
DUBAI LOCATION
TOWEL HOOK
FR-AC05
WALL MOUNTED TOWEL HOOK BLACK FINISH
BY CONTRACTER
1 CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE
TOWEL STORAGE
WALL MOUNTED FR-AC06 BLACK TOWEL STORAGE
CONSTRUCTION DRAWINGS PHASE
BY CONTRACTER
1
GUEST SUITE 03 ENLARGEMENT BATHROOM FIXTURES SCHEDULE
DRAWING TITLE
*** SAMPLES TO BE PROVIDED FOR CLIENT CONFIRMATION.
JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
-
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-GF16-C
FOR TENDERING
CD02 ID002
CD31 ID004
CD02 ID002 MATERIAL LEGEND
B.O.S +4.42 B.O.S +4.42
CODE
MATERIAL
F.C.L +4.20 F.C.L +4.20 F.C.L +4.05
2
PAINT FINISH
9
MIRROR
10
STONE
12
ABK SENSI SIGNORIA CALACATTA VENA ORO (120X280)
15
DARK TINTED GLASS
18
DORICA GREIGE TILE (120x280)
19
LAMINATE WOOD TYPE 1
20
WOOD VENEER TO MATCH DOORS FINISH
23
LAMINATE WOOD TO MATCH DOORS FINISH
26
OPAQUE GLASS
27
LAMINATE WOOD TYPE 2
30
WOOD VENEER TYPE 2
F.C.L +4.05
23
12
4
2
23
12
2
2
4
19
FD07 ID001
FD07 ID001 7
F.F.L +0.45 F.F.L +0.45
1
2
ELEVATION 01
ELEVATION 02
GENERAL NOTES:
CD31 ID004
CD02 ID002
CD02 ID002
B.O.S +4.42
B.O.S +4.42
F.C.L +4.20
F.C.L +4.20
F.C.L +4.05
F.C.L +4.05
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations. REVISION: 05 04 03 02
20
19
19
19
19
23
23
23
23
01
9
NO. DESCRIPTION
MIRROR
DATE
2
MR. MOHAMED FARUQE OWNER
VILLA 123 PROJECT
50" TV
DUBAI LOCATION
DWR DWR DWR
DWR DWR DWR
DWR
DWR
DWR
DWR
12
DWR
DWR
CONCEPT DESIGN PHASE
30 DRAWER
30 DRAWER
SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE
23
F.F.L +0.45
FD07 ID001
23
23
23
9
F.F.L +0.45
CONSTRUCTION DRAWINGS PHASE
DRAWING TITLE
3
ELEVATION 03
4
ELEVATION 04
GUEST SUITE 03 ENLARGEMENT INTERIOR ELEVATIONS JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
1:25
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-GF16-D
FOR TENDERING CD21 ID003
CD05 ID002
CD01 ID002
CD05 ID002
B.O.S +4.42
B.O.S +4.42
CD21 ID003
CD01 ID002
CD05 ID002
CD05 ID002
B.O.S +4.42
B.O.S +4.42
MATERIAL LEGEND
F.C.L +4.05
F.C.L +4.05
F.C.L +3.55 F.C.L +3.45
F.C.L +3.55 F.C.L +3.45
26 F.
CODE
F.C.L +3.55 F.C.L +3.45
F.C.L +3.55 F.C.L +3.45
26 F.
MATERIAL
2
PAINT FINISH
9
MIRROR
10
STONE
12
ABK SENSI SIGNORIA CALACATTA VENA ORO (120X280)
15
DARK TINTED GLASS
18
DORICA GREIGE TILE (120x280)
19
LAMINATE WOOD TYPE 1
20
WOOD VENEER TO MATCH DOORS FINISH
23
LAMINATE WOOD TO MATCH DOORS FINISH
26
OPAQUE GLASS
27
LAMINATE WOOD TYPE 2
30
WOOD VENEER TYPE 2
9 FR-AC05 18
4
18
18
FR-AC06
18
9
18
18 FR-FI23 18
26
26
FR-FI23 FR-FI09
FD02 ID001
F.F.L +0.45
FR-FI09
DRAWER
18 DRAWER
18 DRAWER
18 DRAWER
DRAWER
27 DRAWER
27 DRAWER
27 DRAWER
F.F.L +0.45
5
ELEVATION 05
F.F.L +0.45
6
FR-FI23 FR-FI09
ELEVATION 06
DRAWER
F.F.L +0.45
18
7
FD02 ID001
DRAWER
FD02 ID001
ELEVATION 07
8
ELEVATION 08
GENERAL NOTES:
CD05 ID002
CD01 ID002
CD01 ID002
CD05 ID002
CD05 ID002
CD01 ID002
B.O.S +4.42 B.O.S +4.42
F.C.L +3.55 F.C.L +3.45
B.O.S +4.42
F.C.L +3.55 F.C.L +3.45
F.C.L +3.55 F.C.L +3.45
CD05 ID002
CD05 ID002
B.O.S +4.42
B.O.S +4.42
B.O.S +4.42
F.C.L +3.55 F.C.L +3.45
F.C.L +3.55 F.C.L +3.45
F.C.L +3.55 F.C.L +3.45
CD05 ID002
CD01 ID002
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations. REVISION: 05
FR-FI06 FR-FI06
04
FR-FI06
03 02 01 NO. DESCRIPTION
26 F.
DATE
MR. MOHAMED FARUQE OWNER
18 18
VILLA 123
18
18
18
18
PROJECT
FR-FI18
DUBAI LOCATION
26
FR-FI16
FR-FI16 FR-FI19
FD02 ID001
FD02 ID001
FD02 ID001
FD02 ID001
FR-FI01
FR-FI15
FD02 ID001
FR-AC01 FR-FI01
FR-FI15
FD02 ID001
FR-AC01 FR-FI01
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
F.F.L +0.45 F.F.L +0.45
F.F.L +0.45
F.F.L +0.45
F.F.L +0.45
F.F.L +0.45
DRAWING TITLE
9
ELEVATION 09
10
ELEVATION 10
11
ELEVATION 11
12
ELEVATION 12
13
ELEVATION 13
14
ELEVATION 14
GUEST SUITE 03 ENLARGEMENT INTERIOR ELEVATIONS JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
1:25
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-GF16-E
TO MATCH BATHROOM TILE
FOR TENDERING DORICA GREIGE TILE 120x280CM
HIDDEN LIGHT WITH DIFFUSER
TO MATCH BATHROOM TILE
TO MATCH BATHROOM TILE LAMINATE WOODEN DRAWERS
LAMINATE WOODEN DRAWERS DETAIL A HIDDEN LIGHT WITH DIFFUSER
1
DETAIL B
DETAILS A & B
PORCELAIN SHELF TO MATCH DORICA AVORIO TILE
GENERAL NOTES:
2
DETAIL C
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
DETAIL A
HIDDEN LIGHT WITH DIFFUSER
MIRROR
REVISION: 05
MIRROR
04
FR-AC06
03 02 01 NO. DESCRIPTION
MR. MOHAMED FARUQE
PORCELAIN SHELF TO MATCH BATHROOM TILE
FR-FI23
DATE
OWNER
FR-FI23
VILLA 123 PROJECT
FR-FI09
FR-FI09
DUBAI
DETAIL A
LOCATION
DETAIL C DRAWER
DRAWER
DRAWER
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE
DRAWER
DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
DRAWER
DRAWER
DRAWER
DRAWER
GUEST SUITE 03 ENLARGEMENT DETAILS 1
DRAWING TITLE
JULY 2023
ISSUE DATE
3
BATHROOM SINK ELEVATION
Arch. DALIA RAWABDEH
5 4
BATHROOM SINK SECTION
DESIGNED BY:
DRAWN BY:
DETAIL B
SHOWER NICHE ELEVATION
6
SHOWER NICHE SECTION
PAPER SIZE DRAWING SCALE
A1
A.S
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-GF16-F
FOR TENDERING
DESK
CABLE MANAGEMENT OPENING
WOOD VENEER TO MATCH WOODEN CLADDING
DESK
MIRROR
WOOD VENEER TO MATCH WOODEN CLADDING DRAWER
50" TV
DETAIL D
3
DETAIL D GENERAL NOTES:
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
DETAIL D
DESK
DRAWER
DRAWER
DRAWER
REVISION: 05 04 03 02 01
1
NO. DESCRIPTION
ELEVATION 2
DATE
SECTION
MR. MOHAMED FARUQE OWNER
VILLA 123
2x2 cm SUBSTRUCTURE
PROJECT
DUBAI LOCATION
4
WALL DETAIL 1
CONCEPT DESIGN PHASE
WOOD 5mm GROOVE
U-CHANNEL POWDER COATED (BLACK FINISH)
U-CHANNEL POWDER COATED (BLACK FINISH)
ABK SENSI SIGNORIA CALACATTA VENA ORO (120X280)
ABK SENSI SIGNORIA CALACATTA VENA ORO (120X280)
U-CHANNEL POWDER COATED (BLACK FINISH)
WOOD
SCHEMATIC DESIGN PHASE
5mm GROOVE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
GUEST SUITE 03 ENLARGEMENT DETAILS 2
DRAWING TITLE
MIRROR
WOOD
WOOD
WOOD
WOOD
JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
5
WALL DETAIL 2
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
2x2 cm SUBSTRUCTURE
3x3 cm SUBSTRUCTURE
A1
A.S
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-GF16-G
FOR TENDERING
DIMENSION LAYOUT LEGEND SYMBOL
DESCRIPTION CLEAR DIMENSION CLADDING DIMENSION
LOBBY 01 FF
01
FLOORING LAYOUT LEGEND CODE
DESCRIPTION
SYMBOL
LEA CERAMICHESLIMTECH DELIGHT CALACATA ORO 120*120CM POLISHED.
TL-03
TS
TRANSITION STRIP
F.F.L. +4.85 TL-03
ELEV 3
ELEV 2
SP
F.F.L. +4.85 TL-03
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
LOBBY 02 FF
GENERAL NOTES:
02
REVISION: 05 04 03 02 01 NO. DESCRIPTION
DATE
MR. MOHAMED FARUQE OWNER
ELEV 1
VILLA 123 PROJECT
DUBAI LOCATION
F.F.L. +4.85 TL-03
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
LOBBY 01&2 ENLARGMENTS LAYOUTS
DRAWING TITLE
JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
1
DIMENSIONS PLAN
2
ANNOTATION PLAN
3
FLOORING PLAN
A1
1:25
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-FF01-A
FOR TENDERING LI01
LI02
LIGHTING LAYOUT LEGEND
F.C.L. +7.95 B.O.S. +8.22
LI02
CODE
F.C.L. +7.85 B.O.S. +8.22
SYMBOL
DESCRIPTION
LI01
HIDDEN LIGHT
LI02
SPOT LIGHT
LI07A
TRACK WITH LED LINEAR LIGHT
LI07A LI02 LI02
LI07A LI01 LI01
F.C.L. +7.95 B.O.S. +8.22
MATERIAL LEGEND CODE
MATERIAL
21
WOOD CLADDING PUTTIED AND PAINTED WITH TEXTURED PAINT AS SPECIFIED TYPE 1
22
WOOD CLADDING PUTTIED AND PAINTED WITH TEXTURED PAINT AS SPECIFIED TYPE 2
23
WOOD FINISH TYPE 3
LI01
CD05 ID002
F.C.L. +7.95 B.O.S. +8.22 B.O.S +8.22
LI01
F.C.L. +7.85 B.O.S. +8.22
F.C.L +7.85
LI07A
4
2
2
LI02 GENERAL NOTES:
F.C.L. +7.85 B.O.S. +8.22
LI02 LI01
F.F.L +4.85
F.C.L. +7.95 B.O.S. +8.22
FD05 ID001
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations. REVISION: 05
F.C.L. +7.95 B.O.S. +8.22
04
LI01
03 02 01 NO. DESCRIPTION
DATE
MR. MOHAMED FARUQE OWNER
VILLA 123
F.C.L. +7.85 B.O.S. +8.22
PROJECT
DUBAI
LI07A
LOCATION
F.C.L. +7.85 B.O.S. +8.22 LI07A
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
LOBBY01,02 ENLARGMENTS LAYOUTS
DRAWING TITLE
JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
1
REFLECTED CEILING PLAN
2
LIGHTING PLAN
3
ELEVATION 01
A1
1:25
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-FF01-B
FOR TENDERING
MATERIAL LEGEND
CD05 ID002
CODE 21
B.O.S +8.22
MATERIAL
WOOD CLADDING PUTTIED AND PAINTED WITH TEXTURED PAINT AS SPECIFIED TYPE 1
22
WOOD CLADDING PUTTIED AND PAINTED WITH TEXTURED PAINT AS SPECIFIED TYPE 2
23
WOOD FINISH TYPE 3
F.C.L +7.85
02A
2
ELEVATOR
4
2
4
2
F.F.L +4.85
FD07 ID001
1
FD05 ID001
ELEVATION 02
GENERAL NOTES:
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
CD05 ID002 B.O.S +8.22
F.C.L +7.85
REVISION: 05 04 03 02
1
01
2
NO. DESCRIPTION
OPEN
DATE
MR. MOHAMED FARUQE
OPEN
OWNER
VILLA 123 PROJECT
DUBAI LOCATION
25
CONCEPT DESIGN PHASE F.F.L +4.85
SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
FD05 ID001
FD09 ID001
DRAWING TITLE
FAMILY ROOM INTERIOR ELEVATIONS AND DETAILS JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
2
ELEVATION 03
A1
A.S
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-FF01-C
FOR TENDERING
GENERAL NOTES:
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations. REVISION: 05 04 03 02 01 NO. DESCRIPTION
DATE
MR. MOHAMED FARUQE OWNER
VILLA 123 PROJECT
DUBAI LOCATION
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
FAMILY ROOM RENDERS
DRAWING TITLE
JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
1:25
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-FF05-0
FOR TENDERING FURNITURE LAYOUT LEGEND CODE
DESCRIPTION
FR-S03
SOFA
FR-S07
SOFA
FR-T07
TABLE
FR-T08
TABLE
FR-T09
TABLE
FR-TO08
FR-SO03
FR-SO07
ELEV 2 ELEV 1 FR-TO09
FLOORING LAYOUT LEGEND
FR-TO07
CODE
DESCRIPTION
SYMBOL
FAMILY ROOM FF
LEA CERAMICHE-BIOSELECT - OAK VANILLA 20*120cm NAT.
TL-01
05
FAMILY ROOM FF
05
TS
TRANSITION STRIP
FD
SHOWER FLOOR DRAIN
70" TV
1
3
ANNOTATION PLAN
FURNITURE PLAN
GENERAL NOTES:
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations. REVISION: 05 04 03 02 01 NO. DESCRIPTION
F.F.L. +4.85 TL-01
DATE
MR. MOHAMED FARUQE OWNER
VILLA 123
FAMILY ROOM FF
PROJECT
05
DUBAI LOCATION
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE SP
CONSTRUCTION DRAWINGS PHASE
FAMILY ROOM PLANS
DRAWING TITLE
JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
2
DIMENSIONS PLAN
4
FLOORING PLAN
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
1:25
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-FF05-A
FOR TENDERING
REFLECTED CEILING PLAN LEGEND HATCH
F.C.L. +8.00 B.O.S. +8.22
DESCRIPTION F.C.L. +7.85 B.O.S. +8.22
F.C.L. +8.00 B.O.S. +8.22
LINTEL
F.C.L. +7.60 B.O.S. +8.22
LIGHTING LAYOUT LEGEND CODE
SYMBOL
DESCRIPTION
FAMILY ROOM FF
05
F.C.L. +7.85 B.O.S. +8.22
LI01
HIDDEN LIGHT
LI02
SPOT LIGHT
LI07A
TRACK WITH LED LINEAR LIGHT
LI15
FLOOR LAMP
LI16
SCONCE
F.C.L. +7.95 B.O.S. +8.22
REFLECTED CEILING PLAN
1
GENERAL NOTES:
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
LI07A
REVISION: 05
LI07A
04 03 02
LI02 LI02 LI02
01 NO. DESCRIPTION
DATE
LI02 LI02 LI02
MR. MOHAMED FARUQE OWNER
VILLA 123
LI02 LI02 LI02 LI15
PROJECT
LI02 LI02 LI02
DUBAI LOCATION
FAMILY ROOM FF
05
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE LI02 LI02
LI01
LI01 LI01
LI16
CONSTRUCTION DRAWINGS PHASE LI01
FAMILY ROOM R.C.P & LIGHTING PLAN
DRAWING TITLE
JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
2
LIGHTING PLAN
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
1:25
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-FF05-B
CD05 ID002
CD03 ID002
FOR TENDERING
B.O.S +8.22
B.O.S +8.22
F.C.L +8.00 F.C.L +7.85
F.C.L +7.85
MATERIAL LEGEND CODE 02A
02A
02A
02A
02A
02A
MATERIAL
02A
PAINTED GYPSUM BOARED
22
HDF WOOD CLADDING PUTTIED AND PAINTED WITH TEXTURED PAINT AS SPECIFIED TYPE 2
23
LAMINATE WOOD TO MATCH DOORS FINISH
22
23
LI16 70" TV
LI16
FD07 ID001
FD07 ID001
F.F.L +4.85
CUSTOM-MADE STONE TV UNIT
F.F.L +4.85
1
ELEVATION 01
5mm GROOVE
2
5mm GROOVE
5mm GROOVE
5mm GROOVE
ELEVATION 02
5mm GROOVE
GENERAL NOTES:
HIDDEN LIGHT WITH DIFFUSER
HIDDEN LIGHT WITH DIFFUSER
HIDDEN LIGHT (LI01)
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
METAL SHELF REVISION:
METAL SHELF BOLTED TO SUBFRAME
LI16
METAL SHELF METAL SHELF BOLTED TO SUBFRAME
70" TV
05 04
2x2cm SUBSTRUCTURE
2x2cm SUBSTRUCTURE
PAINTED WOOD CLADDING
PAINTED WOOD CLADDING TV
3x3cm SUBSTRUCTURE WOOD CLADDING WITH TEXTURED PAINT FINISH
LI16 METAL SHELF
3x3cm SUBSTRUCTURE WOOD CLADDING WITH TEXTURED PAINT FINISH
METAL SHELF BOLTED TO SUBFRAME
03 02 01 NO. DESCRIPTION
DATE
MR. MOHAMED FARUQE OWNER
VILLA 123 PROJECT
DUBAI LOCATION
CONCEPT DESIGN PHASE
HIDDEN LIGHT WITH DIFFUSER
HIDDEN LIGHT WITH DIFFUSER
SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
DRAWING TITLE
CUSTOM-MADE STONE TV UNIT
CUSTOM-MADE STONE TV UNIT
CUSTOM-MADE STONE TV UNIT
FAMILY ROOM INTERIOR ELEVATIONS AND DETAILS JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
3
TV UNIT ELEVATION
4
TV UNIT SECTION 1
5
TV UNIT SECTION 2
PAPER SIZE DRAWING SCALE
A1
A.S
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-FF05-C
FOR TENDERING N
FURNITURE LAYOUT LEGEND FR-NS03
FR-NS04
FR-CH04
ELEV 1
FR-BE01
ELEV 4
ELEV 2 ELEV 3
CODE
DESCRIPTION
FR-S08
SOFA
FR-T11
TABLE
FR-BE02
BED
FR-FI01
WC
FR-FI06
HEAD SHOWER
FR-FI10
BIDET
FR-FI11
MASTER SINKS
FR-FI12
BATHTUB
GUEST SUITE 05 FF
06
FLOORING LAYOUT LEGEND CODE
TV
DESCRIPTION
SYMBOL
LEA CERAMICHE-BIOSELECT - OAK VANILLA 20*120cm NAT.
TL-01
FR-FI18 FR-FI19
ELEV 11 ELEV 14 ELEV 5
SHOWER
FR-FI16
DESVRES ARIANA-DORICA GREIGE 120*120cm NAT.
TL-09 FR-FI06
ELEV 12 ELEV 13
SHOWER
TRANSITION STRIP
FD
SHOWER FLOOR DRAIN
FR-AC01
ELEV 7 ELEV 10
TS FR-AC02 FR-FI15 FR-AC04 FR-FI01
ELEV 8
FR-AC05
ELEV 9 GUEST SUITE 05 BATHROOM FF
07
ELEV 6 FR-FI09 FR-FI23
1
ANNOTATION PLAN
FURNITURE PLAN
3
GENERAL NOTES:
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations. REVISION: 05 04 03
F.F.L. +4.85
02
TL-01
01 NO. DESCRIPTION
DATE
SP
MR. MOHAMED FARUQE OWNER
VILLA 123 PROJECT
DUBAI LOCATION
FD
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE
SHOWER
DESIGN DEVELOPMENT PHASE SP
CONSTRUCTION DRAWINGS PHASE
TS F.F.L. +4.85 TL-09
DRAWING TITLE
GUEST SUITE 05 ENLARGEMENT PLANS JULY 2023
ISSUE DATE
F.F.L. +4.85 TL-01 DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
TS
PAPER SIZE DRAWING SCALE
2
DIMENSIONS PLAN
4
FLOORING PLAN
A1
1:25
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-FF06-A
FOR TENDERING F.C.L. +8.00 B.O.S. +8.22
REFLECTED CEILING PLAN LEGEND HATCH
DESCRIPTION F.C.L. +7.85 B.O.S. +8.22
LINTEL
F.C.L. +7.60 B.O.S. +8.22
F.C.L. +8.00 B.O.S. +8.22
F.C.L. +7.85 B.O.S. +8.22
LIGHTING LAYOUT LEGEND CODE
SYMBOL
DESCRIPTION
LI01
HIDDEN LIGHT
LI02
SPOT LIGHT
LI07C
TRACK WITH DIRECTIONAL PROJECTOR LIGHT
F.C.L. +7.70 B.O.S. +8.22
LI19
NIGHT STAND PENDANT LIGHT
LI12
WALL MOUNTED SPOTLIGHT
SHOWER F.C.L. +7.60 B.O.S. +8.22
F.C.L. +7.60 B.O.S. +8.22
F.C.L. +8.00 B.O.S. +8.22 F.C.L. +7.85 B.O.S. +8.22
F.C.L. +7.70 B.O.S. +8.22
GENERAL NOTES:
REFLECTED CEILING PLAN
1
LI12 LI01
LI01 LI19
LI02
LI02
LI02
LI02
LI02
LI02
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations. REVISION: 05 04 03 02 01
LI02
LI02
LI02
LI02
LI02
LI02
NO. DESCRIPTION
DATE
MR. MOHAMED FARUQE OWNER
VILLA 123 PROJECT
DUBAI LOCATION
LI02
LI02
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE LI02
LI02
LI02
LI02
DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
DRAWING TITLE
LI02
LI02
LI02
LI02
GUEST SUITE 05 ENLARGEMENT R.C.P & LIGHTING PLAN JULY 2023
ISSUE DATE
LI02
LI02
LI02
LI02
LI11 DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
2
LIGHTING PLAN
A1
1:25
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-FF06-B
FOR TENDERING
FIXTURE
CODE
BASIN FAUCET FR-FI23 AND MIXER
DESCRIPTION
SUPPLIER
FREE STANDING FAUCET WITH MIXER BLACK FINISH
newform MINI-X Art. 61310 Single-lever basin mixer
SAMPLE TO BE PROVIDED FOR CLIENT CONFIRMATION HAND BIDET MIXER
HAND HELD BIDET
TOILET SEAT
TOILET FLUSH PLATE
TRASH BIN
FR-FI15
FR-FI01
FR-FI16
FR-AC02
COUNT
1
newform Art. 885
BLACK FINISH
External part. To combine with oncealed part 27852.
WALL MOUNTED TOILET SEAT
SCARABEO
BLACK FINISH
Moon Wall-mounted WC 45 Moon CODE: 5524CL
WALL MOUNTED FLUSH PLATE
Newform DELTA ZERO
STAINLESS STEEL FINISH
Art. 887
FREE STANDING TRASH BIN
IMAGE
1
1
1
BY CONTRACTER
1
BY CONTRACTER
1
BLACK FINISH
TOILET PAPER HOLDER
WALL MOUNTED PAPER HOLDER FR-AC01 BLACK FINISH
GENERAL NOTES:
FREE STANDING WASH BASIN
FR-FI09
PRESS-BUTTON FR-AC03 DRAIN
TOILET BRUSH
HEAD SHOWER
SCARABEO BLACK OVAL WASH BASIN
PRESS -BUTTON DRAIN BLACK FINISH
FR-AC04 WALL MOUNTED BRUSH BLACK FINISH
FR-FI06
WALL MOUNTED HEAD SHOWER BLACK FINISH
1 CODE: 8111 newform BLINK Art. 230 1”1/4 press-button drain
1
BY CONTRACTER
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
newform REVISION:
Art. 26534 OR EQUIVALENT
1
05 04 03 02
HAND SHOWER
WALL MOUNTED
newform
BLACK HAND SHOWER
CODE: Art. 823
FR-FI18
01
1
NO. DESCRIPTION
DATE
MR. MOHAMED FARUQE OWNER
SHOWER MIXER
WALL MOUNTED FR-FI19
newform Art. 67688E
VILLA 123 1
PROJECT
BLACK SHOWER MIXER
DUBAI LOCATION
TOWEL HOOK
FR-AC05
WALL MOUNTED TOWEL HOOK BLACK FINISH
BY CONTRACTER
1 CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE
TOWEL STORAGE
WALL MOUNTED FR-AC06 BLACK TOWEL STORAGE
CONSTRUCTION DRAWINGS PHASE
BY CONTRACTER
1 DRAWING TITLE
GUEST SUITE 05 ENLARGEMENT BATHROOM FIXTURES SCHEDULE
*** SAMPLES TO BE PROVIDED FOR CLIENT CONFIRMATION.
JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
1:25
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-FF06-C
CD23 ID003
CD26 ID004
CD23 ID003
CD26 ID004
CD23 ID003
FOR TENDERING
B.O.S +8.22 B.O.S +8.22
B.O.S +8.22 F.C.L +8.00
F.C.L +8.00
F.C.L +8.00
F.C.L +7.85
F.C.L +7.85
F.C.L +7.85 MATERIAL LEGEND CODE
SHELVES
2
2
28
2
2
50" TV
23
19
MATERIAL
2
PAINT FINISH
9
MIRROR
10
STONE
12
ABK SENSI SIGNORIA CALACATTA VENA ORO (120X280)
18
DORICA GREIGE TILE (120x280)
19
LAMINATE WOOD TYPE 1
20
WOOD VENEER
23
LAMINATE WOOD TO MATCH DOORS FINISH
26
OPAQUE GLASS
27
LAMINATE WOOD TYPE 2
28
FLUTED WOOD PANELS
2
28
FD10 ID001
FD07 ID001
FD07 ID001
FD07 ID001
FD07 ID001
F.F.L +4.85 F.F.L +4.85
F.F.L +4.85
ELEVATION 01
1
2
ELEVATION 02
3
ELEVATION 03
CD05 ID002 CD23 ID003
CD05 ID002
B.O.S +8.22
B.O.S +8.22
B.O.S +8.22
F.C.L +8.00 F.C.L +7.85
F.C.L +7.85
19
2
19
19
19
28
19
9
F.C.L +7.85
28 GENERAL NOTES:
2
FD07 ID001
F.F.L +4.85
4
DWR DWR DWR
DWR DWR DWR
DWR
DWR
DWR
DWR
DWR
DWR
DESK
2
FD07 ID001
9
28
2
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
FD07 ID001
28 F.F.L +4.85
ELEVATION 04
F.F.L +4.85
5
ELEVATION 05
6
ELEVATION 06
REVISION: 05
CD21 ID003
CD13 ID003
B.O.S +8.22
CD13 ID003
F.C.L +8.00
CD21 ID003
CD01 ID002 CD05 ID002
B.O.S +8.22
04
CD01 ID002
CD01 ID002
02 01
B.O.S +8.22
B.O.S +8.22
03
NO. DESCRIPTION
F.C.L +8.00
DATE
F.C.L +7.85
F.C.L +7.60
MR. MOHAMED FARUQE
F.C.L +7.85
F.C.L +7.70
F.C.L +7.70
F.C.L +7.60
OWNER
F.C.L +7.60
F.C.L +7.60
VILLA 123 PROJECT
26 F.
DUBAI LOCATION
26 F.
9 FR-AC05 18
CONCEPT DESIGN PHASE
18 18
18
FR-AC06
18
18
4
26
SCHEMATIC DESIGN PHASE
F.
DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
26 FR-FI23 FR-FI09
FR-FI16
FR-FI23
FR-FI23 FR-FI09
FR-FI09 FR-FI15
FR-AC01 FR-FI01
DRAWING TITLE
FD02 ID001
DRAWER 18 DRAWER
FR-FI01
18 DRAWER
18 DRAWER
DRAWER FR-FI01
DRAWER 27 DRAWER F.F.L +4.85
27 DRAWER
18
JULY 2023
ISSUE DATE
DRAWER
27 DRAWER
F.F.L +4.85 F.F.L +4.85
GUEST SUITE 05 ENLARGEMENT INTERIOR ELEVATIONS
DESIGNED BY:
DRAWN BY:
F.F.L +4.85
Arch. DALIA RAWABDEH
7
ELEVATION 07
8
ELEVATION 08
9
ELEVATION 09
10
ELEVATION 10
PAPER SIZE DRAWING SCALE
A1
1:25
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-FF06-D
CD01 ID002
CD05 ID002
B.O.S +8.22
B.O.S +8.22
B.O.S +8.22
F.C.L +7.70
B.O.S +8.22
FOR TENDERING
F.C.L +7.70
F.C.L +7.60
F.C.L +7.60
CD01 ID002
CD05 ID002
F.C.L +7.60 FR-FI06
FR-FI06
F.C.L +7.60
MATERIAL LEGEND
FR-FI06
CODE
FR-FI06
MATERIAL
2
PAINT FINISH
9
MIRROR
10
STONE
12
ABK SENSI SIGNORIA CALACATTA VENA ORO (120X280)
18
DORICA GREIGE TILE (120x280)
19
LAMINATE WOOD TYPE 1
20
WOOD VENEER
23
LAMINATE WOOD TO MATCH DOORS FINISH
26
OPAQUE GLASS
27
LAMINATE WOOD TYPE 2
28
FLUTED WOOD PANELS
26 F.
18
26
26
F.
F.
26
18
FR-FI18
FR-FI19
FD02 ID001
FD02 ID001
FD02 ID001
F.F.L +4.85
F.F.L +4.85
11
ELEVATION 11
F.F.L +4.85
12
ELEVATION 12
13
ELEVATION 13
F.F.L +4.85
14
ELEVATION 14
GENERAL NOTES:
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations. REVISION: 05 04 03 02 01 NO. DESCRIPTION
DATE
MR. MOHAMED FARUQE OWNER
VILLA 123 PROJECT
DUBAI LOCATION
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
DRAWING TITLE
GUEST SUITE 05 ENLARGEMENT INTERIOR ELEVATIONS JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
1:25
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-FF06-E
FOR TENDERING TO MATCH BATHROOM TILE
DORICA AVORIO TILE 120x280CM
HIDDEN LIGHT WITH DIFFUSER
TO MATCH BATHROOM TILE
TO MATCH BATHROOM TILE LAMINATE WOODEN DRAWERS
LAMINATE WOODEN DRAWERS DETAIL A HIDDEN LIGHT WITH DIFFUSER
1
DETAIL B
DETAILS A & B
PORCELAIN SHELF TO MATCH DORICA AVORIO TILE
GENERAL NOTES:
2
DETAIL C
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
DETAIL A
HIDDEN LIGHT WITH DIFFUSER
MIRROR REVISION:
FR-AC06
05 04 03 02 01 NO. DESCRIPTION
DATE
FR-FI23
MR. MOHAMED FARUQE
PORCELAIN SHELF TO MATCH BATHROOM TILE
FR-FI23
OWNER
FR-FI09
DETAIL A
VILLA 123
FR-FI09
PROJECT
DUBAI LOCATION
DRAWER
DRAWER
DRAWER
DETAIL C
DRAWER
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
DRAWER
DRAWER
DRAWER DRAWER
GUEST SUITE 05 ENLARGEMENT DETAILS 1
DRAWING TITLE
JULY 2023
ISSUE DATE
DETAIL B DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
3
BATHROOM SINK ELEVATION
4
BATHROOM SINK SECTION
5
SHOWER NICHE ELEVATION
6
SHOWER NICHE SECTION
PAPER SIZE DRAWING SCALE
A1
-
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-FF06-F
FOR TENDERING
CABLE MANAGEMENT OPENING
MIRROR
DETAIL C
DETAIL C 3
DETAIL C GENERAL NOTES:
DESK DESK
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations. REVISION: 05 04
ELEVATION
1
2
SECTION
03 02 01 NO. DESCRIPTION
2x2 cm SUBSTRUCTURE
DATE
MR. MOHAMED FARUQE OWNER
VILLA 123 PROJECT
1
WALL DETAIL 1
DUBAI LOCATION
FLUTED WOOD
U-CHANNEL POWDER COATED (BLACK FINISH)
FLUTED WOOD CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
GUEST SUITE 05 ENLARGEMENT DETAILS 2
DRAWING TITLE
6x6 cm SUBSTRUCTURE
2x2 cm SUBSTRUCTURE
JULY 2023
ISSUE DATE
1
WALL DETAIL 2 DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
Arch. DINA HADDADIN
WOOD FLUTED WOOD
MIRROR PAPER SIZE DRAWING SCALE
A1
-
PROJECT No
SHEET No
IE-FF06-G
FOR TENDERING FURNITURE LAYOUT LEGEND
FR-CH04
ELEV 1 ELEV 2 ELEV 3
GUEST SUITE 04 FF
DESCRIPTION
FR-S08
SOFA
FR-T11
TABLE
FR-BE02
BED
FR-FI01
WC
FR-FI06
HEAD SHOWER
FR-FI10
BIDET
FR-FI11
MASTER SINKS
FR-FI12
BATHTUB
N
TV
ELEV 4
CODE
08 FLOORING LAYOUT LEGEND
SHOWER ELEV 11
CODE
ELEV 9 ELEV 10
FR-BE01
FR-FI18 FR-FI19
ELEV 5 ELEV 8
FR-AC05
TRANSITION STRIP
FD
SHOWER FLOOR DRAIN
FR-AC04 FR-AC02 FR-FI23
GUEST SUITE 04 BATHROOM FF
TS
FR-AC01
ELEV 12 ELEV 13
DESVRES ARIANA-DORICA GREIGE 120*120cm NAT.
TL-09
FR-FI06
ELEV 6 ELEV 7
FR-FI01
09
FR-NS04
FR-FI16
FR-NS03
FR-FI15 WC
1
LEA CERAMICHE-BIOSELECT - OAK VANILLA 20*120cm NAT.
TL-01
FR-FI09
SHOWER
ELEV 14
DESCRIPTION
SYMBOL
WC
ANNOTATION PLAN
FURNITURE PLAN
3
GENERAL NOTES:
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
TS
REVISION: 05 04
SP
03
SP
GUEST SUITE 04 FF
TS
02
08
01 NO. DESCRIPTION
DATE
MR. MOHAMED FARUQE OWNER
F.F.L. +4.85 F.F.L. +4.85 FD
SHOWER
TL-09
TL-01
VILLA 123 PROJECT
DUBAI LOCATION
CONCEPT DESIGN PHASE
GUEST SUITE 04 BATHROOM FF
SCHEMATIC DESIGN PHASE
09
DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
DRAWING TITLE
GUEST SUITE 04 ENLARGEMENT PLANS JULY 2023
ISSUE DATE
2
DIMENSIONS PLAN
4
FLOORING PLAN
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
1:25
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-FF08-A
FOR TENDERING
F.C.L. +7.95 B.O.S. +8.22
REFLECTED CEILING PLAN LEGEND HATCH
DESCRIPTION F.C.L. +7.85 B.O.S. +8.22
LINTEL F.C.L. +7.85 B.O.S. +8.22
F.C.L. +7.60 B.O.S. +8.22
LINTEL +7.92
LIGHTING LAYOUT LEGEND CODE
F.C.L. +7.85 B.O.S. +8.22
SYMBOL
DESCRIPTION
LI01
HIDDEN LIGHT
LI02
SPOT LIGHT
LI07C
TRACK WITH DIRECTIONAL PROJECTOR LIGHT
SHOWER F.C.L. +8.00 B.O.S. +8.22
F.C.L. +7.60 B.O.S. +8.22
F.C.L. +7.60 B.O.S. +8.22
F.C.L. +7.70 B.O.S. +8.22
LI19
NIGHT STAND PENDANT LIGHT
LI12
WALL MOUNTED SPOTLIGHT
F.C.L. +7.60 B.O.S. +8.22
F.C.L. +7.70 B.O.S. +8.22
F.C.L. +7.95 B.O.S. +8.22
REFLECTED CEILING PLAN
1
GENERAL NOTES:
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
F.C.L. +8.00 B.O.S. +8.22 LI01
LI07C
LINTEL +7.92
REVISION:
F.C.L. +7.85 B.O.S. +8.22
05 04 03
F.C.L. +7.85 B.O.S. +8.22
02
LI01
SHOWER
01 NO. DESCRIPTION
LI02
LI02
LI02
F.C.L. +7.60 B.O.S. +8.22
F.C.L. +8.00 B.O.S. +8.22 LI11
F.C.L. +7.60 B.O.S. +8.22
LI01
DATE
LI02 LI02
LI02 LI02
LI02
LI02
MR. MOHAMED FARUQE OWNER
VILLA 123
F.C.L. +7.70 B.O.S. +8.22
PROJECT
F.C.L. +7.70 B.O.S. +8.22
DUBAI
LI02 LOCATION
LI02 F.C.L. +7.70 B.O.S. +8.22 LI01
F.C.L. +7.60 B.O.S. +8.22
CONCEPT DESIGN PHASE
LI07C
SCHEMATIC DESIGN PHASE LI02
LI02
DESIGN DEVELOPMENT PHASE
LI02 LI19
CONSTRUCTION DRAWINGS PHASE
WC LI12
F.C.L. +8.00 B.O.S. +8.22
LI12 DRAWING TITLE
GUEST SUITE 04 ENLARGEMENT R.C.P & LIGHTING PLAN JULY 2023
ISSUE DATE
2
LIGHTING PLAN DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
1:25
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-FF08-B
FOR TENDERING
FIXTURE
CODE
BASIN FAUCET FR-FI23 AND MIXER
DESCRIPTION
SUPPLIER
FREE STANDING FAUCET WITH MIXER BLACK FINISH
newform MINI-X Art. 61310 Single-lever basin mixer
SAMPLE TO BE PROVIDED FOR CLIENT CONFIRMATION HAND BIDET MIXER
HAND HELD BIDET
TOILET SEAT
TOILET FLUSH PLATE
TRASH BIN
FR-FI15
FR-FI01
FR-FI16
FR-AC02
COUNT
1
newform Art. 885
BLACK FINISH
External part. To combine with oncealed part 27852.
WALL MOUNTED TOILET SEAT
SCARABEO
BLACK FINISH
Moon Wall-mounted WC 45 Moon CODE: 5524CL
WALL MOUNTED FLUSH PLATE
Newform DELTA ZERO
STAINLESS STEEL FINISH
Art. 887
FREE STANDING TRASH BIN
IMAGE
1
1
1
BY CONTRACTER
1
BY CONTRACTER
1
BLACK FINISH
TOILET PAPER HOLDER
WALL MOUNTED PAPER FR-AC01 HOLDER BLACK FINISH
FREE STANDING WASH BASIN
FR-FI09
SCARABEO BLACK OVAL WASH BASIN
1 CODE: 8111 GENERAL NOTES:
PRESS-BUTTON FR-AC03 DRAIN
TOILET BRUSH
HEAD SHOWER
PRESS -BUTTON DRAIN BLACK FINISH
FR-AC04 WALL MOUNTED BRUSH BLACK FINISH
FR-FI06
WALL MOUNTED HEAD SHOWER BLACK FINISH
newform BLINK Art. 230 1”1/4 press-button drain
1
BY CONTRACTER
newform Art. 26534 OR EQUIVALENT
1
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations. REVISION:
HAND SHOWER
WALL MOUNTED
newform
FR-FI18 BLACK HAND SHOWER
CODE: Art. 823
05
1
04 03 02 01
SHOWER MIXER
WALL MOUNTED FR-FI19
newform Art. 67688E
NO. DESCRIPTION
DATE
1
MR. MOHAMED FARUQE
BLACK SHOWER MIXER OWNER
VILLA 123 TOWEL HOOK
FR-AC05
WALL MOUNTED TOWEL HOOK BLACK FINISH
BY CONTRACTER
PROJECT
1
DUBAI LOCATION
TOWEL STORAGE
WALL MOUNTED FR-AC06 BLACK TOWEL STORAGE
BY CONTRACTER
1
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
*** SAMPLES TO BE PROVIDED FOR CLIENT CONFIRMATION. DRAWING TITLE
GUEST SUITE 04 ENLARGEMENT BATHROOM FIXTURE SCHEDULE JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
1:25
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-FF08-C
CD22 ID003
CD26 ID004 B.O.S +8.22
B.O.S +8.22
F.C.L +8.00
F.C.L +8.00
F.C.L +7.85
F.C.L +7.85
FOR TENDERING
CD26 ID004
MATERIAL LEGEND CODE
F.
19
2
19
19
19
19
23
23
23
23
23
MATERIAL
2
PAINT FINISH
9
MIRROR
10
STONE
12
ABK SENSI SIGNORIA CALACATTA VENA ORO (120X280)
18
DORICA GREIGE TILE (120x280)
19
LAMINATE WOOD TYPE 1
20
WOOD VENEER
23
LAMINATE WOOD TO MATCH DOORS FINISH
26
OPAQUE GLASS
27
LAMINATE WOOD TYPE 2
28
FLUTED WOOD PANELS
30
WOOD VENEER TYPE 2
F.
9
2
2
2
50" TV
DWR DWR DWR
DWR DWR DWR
DWR
DWR
DWR
DWR
DWR
DWR
DESK 12 30
30
30
DRAWER
DRAWER
DRAWER
23
F.F.L +4.85
FD10 ID001
23
23
DESK
FD07 ID001
DRAWER
23
9
23
F.F.L +4.85
ELEVATION 01
1
2
CD20 ID003
CD26 ID004
B.O.S +8.22
F.C.L +8.00
F.C.L +8.00
F.C.L +7.85
F.C.L +7.85
12
12
12
2
4
ELEVATION 02
CD26 ID004
B.O.S +8.22
12
FD07 ID001
CD22 ID003
27
2
2
GENERAL NOTES:
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
28 DESK
FD07 ID001
F.F.L +4.85
F.F.L +4.85
3
ELEVATION 03
4
ELEVATION 04
REVISION: 05
CD21 ID003
CD05 ID002
CD01 ID002
CD01 ID002 B.O.S +8.22
B.O.S +8.22
B.O.S +8.22
CD21 ID003
CD05 ID002
04 03 02
B.O.S +8.22
01
CD05 ID002
F.C.L +8.00
NO. DESCRIPTION
DATE
F.C.L +7.85 F.C.L +7.85 F.C.L +7.70 F.C.L +7.60
MR. MOHAMED FARUQE
F.C.L +7.70 F.C.L +7.60
OWNER
F.C.L +7.60
F.C.L +7.60
VILLA 123 PROJECT
DUBAI LOCATION
FR-AC05
CONCEPT DESIGN PHASE FR-AC06 18
4
18
18
18
9
18
9
18
SCHEMATIC DESIGN PHASE
18
26
FR-FI23 FR-FI09
DRAWER
18 DRAWER
18 DRAWER
18 DRAWER
DRAWER
27 DRAWER
27 DRAWER
27 DRAWER
FR-FI01
DRAWING TITLE
FD02 ID001
DRAWER
F.F.L +4.85
GUEST SUITE 04 ENLARGEMENT INTERIOR ELEVATIONS JULY 2023
ISSUE DATE
F.F.L +4.85
18
F.F.L +4.85
F.F.L +4.85
DESIGN DEVELOPMENT PHASE
FR-FI09
DRAWER
FD02 ID001
26
CONSTRUCTION DRAWINGS PHASE
FR-FI23 FR-FI09
FR-FI23
18
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
5
ELEVATION 05
6
ELEVATION 06
7
ELEVATION 07
8
ELEVATION 08
PAPER SIZE DRAWING SCALE
A1
1:25
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-FF08-D
CD05 ID002
CD01 ID002
CD01 ID002
B.O.S +8.22
CD01 ID002
B.O.S +8.22
B.O.S +8.22
B.O.S +8.22
MATERIAL LEGEND
F.C.L +7.70 F.C.L +7.60
F.C.L +7.60
CODE
F.C.L +7.60
FR-FI06
FR-FI06
26
CD05 ID002
CD05 ID002 F.C.L +7.70 F.C.L +7.60
F.C.L +7.60
B.O.S +8.22
B.O.S +8.22
CD05 ID002
F.C.L +7.70 F.C.L +7.60
FOR TENDERING
CD05 ID002
18
18
18
18
18
18
26
MATERIAL
2
PAINT FINISH
9
MIRROR
10
STONE
12
ABK SENSI SIGNORIA CALACATTA VENA ORO (120X280)
18
DORICA GREIGE TILE (120x280)
19
LAMINATE WOOD TYPE 1
20
WOOD VENEER
23
LAMINATE WOOD TO MATCH DOORS FINISH
26
OPAQUE GLASS
27
LAMINATE WOOD TYPE 2
28
FLUTED WOOD PANELS
30
WOOD VENEER TYPE 2
FR-FI18 FR-FI16
FD02 ID001
FR-FI15
FR-FI19
FD02 ID001
FD02 ID001
F.F.L +4.85
9
ELEVATION 09
10
ELEVATION 10
11
ELEVATION 11
FD02 ID001
F.F.L +4.85
F.F.L +4.85
F.F.L +4.85
F.F.L +4.85
FD02 ID001
FR-FI01
FR-AC01 FR-FI01
F.F.L +4.85
12
ELEVATION 12
13
ELEVATION 13
14
ELEVATION 14
GENERAL NOTES:
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations. REVISION: 05 04 03 02 01 NO. DESCRIPTION
DATE
MR. MOHAMED FARUQE OWNER
VILLA 123 PROJECT
DUBAI LOCATION
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
DRAWING TITLE
GUEST SUITE 04 ENLARGEMENT INTERIOR ELEVATIONS JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
1:25
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-FF08-E
FOR TENDERING TO MATCH BATHROOM TILE
DORICA AVORIO TILE 120x280CM
HIDDEN LIGHT WITH DIFFUSER
TO MATCH BATHROOM TILE
TO MATCH BATHROOM TILE LAMINATE WOODEN DRAWERS
LAMINATE WOODEN DRAWERS DETAIL A HIDDEN LIGHT WITH DIFFUSER
1
DETAIL B
DETAILS A & B
PORCELAIN SHELF TO MATCH DORICA AVORIO TILE
GENERAL NOTES:
2
DETAIL C
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
DETAIL C
DORICA GREIGE TILE 120x280CM HIDDEN LIGHT WITH DIFFUSER
MIRROR MIRROR
REVISION:
FR-AC06
05 04 03 02 01 NO. DESCRIPTION
DATE
FR-FI23
MR. MOHAMED FARUQE
PORCELAIN SHELF TO MATCH DORICA GREIGE TILE
FR-FI23
OWNER
FR-FI09
DETAIL A
VILLA 123
FR-FI09
PROJECT
DUBAI LOCATION
DRAWER
DRAWER
DRAWER
DETAIL C DRAWER
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
DRAWER
DRAWER
DRAWER DRAWER
GUEST SUITE 04 ENLARGEMENT DETAILS 1
DRAWING TITLE
JULY 2023
ISSUE DATE
DETAIL B DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
3
BATHROOM SINK ELEVATION
4
BATHROOM SINK SECTION
5
SHOWER NICHE ELEVATION
6
SHOWER NICHE SECTION
PAPER SIZE DRAWING SCALE
A1
-
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-FF08-F
FOR TENDERING
DESK
CABLE MANAGEMENT OPENING
WOOD VENEER TO MATCH WOODEN CLADDING
DESK
WOOD VENEER TO MATCH WOODEN CLADDING DRAWER
MIRROR
DETAIL D 50" TV
DETAIL D GENERAL NOTES:
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
DESK
DESK
DRAWER
DRAWER
DRAWER
DRAWER
REVISION: 05
1
3
ELEVATION 2
SECTION
DETAIL D
04 03 02 01
FLUTED WOOD
U-CHANNEL POWDER COATED (BLACK FINISH)
FLUTED WOOD
ABK SENSI SIGNORIA CALACATTA VENA ORO (120X280) PANELS HUNG ABOVE
NO. DESCRIPTION
DATE
HIDDEN LIGHT
MR. MOHAMED FARUQE OWNER
VILLA 123 PROJECT
4
WALL DETAIL 1
DUBAI LOCATION
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE
2x2 cm SUBSTRUCTURE
DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
2x2 cm SUBSTRUCTURE
GUEST SUITE 04 ENLARGEMENT DETAILS 2
DRAWING TITLE
JULY 2023
ISSUE DATE
5
WALL DETAIL 2 DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1 MIRROR
WOOD
WOOD
WOOD
WOOD
WOOD
-
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-FF08-G
FOR TENDERING
GENERAL NOTES:
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations. REVISION: 05 04 03 02 01 NO. DESCRIPTION
DATE
MR. MOHAMED FARUQE OWNER
VILLA 123 PROJECT
DUBAI LOCATION
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
DRAWING TITLE
MASTER BEDROOM 01 ENLARGEMENT RENDER JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
1:25
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-FF10-A
FOR TENDERING
ELEV 9 ELEV 11 ELEV 14
ELEV 13
ELEV 12 ELEV 10
MASTER BEDROOM 01 BATHROOM FF
12
DIMENSION LAYOUT LEGEND SYMBOL
DESCRIPTION CLEAR DIMENSION CLADDING DIMENSION
ELEV 5 ELEV 1 ELEV 3 MASTER BEDROOM 01 DRESSING FF
ELEV 4 ELEV 2
ELEV 8
ELEV 6 ELEV 7
11 MASTER BEDROOM 01 FF
10
GENERAL NOTES:
ANNOTATION PLAN
1
MASTER BEDROOM 01 BATHROOM FF
12
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations. REVISION: 05 04 03 02 01 NO. DESCRIPTION
DATE
MR. MOHAMED FARUQE OWNER
VILLA 123
MASTER BEDROOM 01 DRESSING FF
PROJECT
11 MASTER BEDROOM 01 FF
DUBAI LOCATION
10
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
DRAWING TITLE
MASTER BEDROOM 01 ENLARGEMENT ANNOTATION AND DIMENSIONS PLAN JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
2
DIMENSIONS PLAN
PAPER SIZE DRAWING SCALE
A1
1:25
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-FF10-B
FOR TENDERING N
FURNITURE LAYOUT LEGEND
FR-AC05 FR-FI22
FR-FI22
FR-FI11
FR-FI11
CODE
DESCRIPTION
FR-S08
SOFA
FR-T11
TABLE
FR-BE02
BED
FR-FI01
WC
FR-FI06
HEAD SHOWER
FR-FI10
BIDET
FR-FI11
MASTER SINKS
FR-FI12
BATHTUB
FR-FI18 FR-FI19 FR-FI06 FR-FI20 FR-FI10 FR-AC02 FR-FI01 FR-AC04
FR-FI16
FR-FI12
FR-S08
FLOORING LAYOUT LEGEND FR-BE02
CODE FR-FI21
LEA CERAMICHE-BIOSELECT - OAK VANILLA 20*120cm NAT.
TL-01
DESVRES ARIANA-DORICA AVORIO 120*120cm NAT.
TL-04
FR-T11
FR-T11
1
DESCRIPTION
SYMBOL
TS
TRANSITION STRIP
FD
SHOWER FLOOR DRAIN
FURNITURE PLAN GENERAL NOTES:
TS
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
SP SP SP
F.F.L. +4.85 F.F.L. +4.85
TL-01
TL-04
F.F.L. +4.85 TL-04
FD REVISION: 05 04 03 02 01 NO. DESCRIPTION
DATE
MR. MOHAMED FARUQE OWNER
VILLA 123 PROJECT
DUBAI LOCATION
F.F.L. +4.85 TL-01
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
DRAWING TITLE
MASTER BEDROOM 01 ENLARGEMENT FURNITURE AND FLOORING PLANS JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
2
FLOORING PLAN
PAPER SIZE DRAWING SCALE
A1
1:25
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-FF10-C
FOR TENDERING LINTEL +7.92 F.C.L. +7.75 B.O.S. +8.22
REFLECTED CEILING PLAN LEGEND
F.C.L. +7.70 B.O.S. +8.22
DESCRIPTION
HATCH
F.C.L. +7.85 B.O.S. +8.22
LINTEL
F.C.L. +7.60 B.O.S. +8.22
F.C.L. +7.60 B.O.S. +8.22
F.C.L. +7.60 B.O.S. +8.22
F.C.L. +7.85 B.O.S. +8.22
LIGHTING LAYOUT LEGEND
F.C.L. +7.95 B.O.S. +8.22
CODE
EXPOSED CEILING B.O.S. +8.22
F.C.L. +8.00 B.O.S. +8.22
F.C.L. +7.90 B.O.S. +8.22
SYMBOL
DESCRIPTION
LI01
HIDDEN LIGHT
LI02
SPOT LIGHT
LI07C
TRACK WITH DIRECTIONAL PROJECTOR LIGHT
LI17 F.C.L. +7.85 B.O.S. +8.22
F.C.L. +7.60 B.O.S. +8.22
PENDANT LIGHT
SCONCE
LI18
F.C.L. +7.85 B.O.S. +8.22
F.C.L. +8.00 B.O.S. +8.22
1
REFLECTED CEILING PLAN
GENERAL NOTES:
LI01 LI07C
LI01 LI01
LI02 LI02
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
LI07C REVISION: 05
LI18
04
LI01
LI17
03
LI02 LI02 LI07C
02 01 NO. DESCRIPTION
DATE
MR. MOHAMED FARUQE OWNER
LI02 LI02
LI02 LI02
LI02 LI02
VILLA 123 PROJECT
LI02
DUBAI
LI02 LOCATION
CONCEPT DESIGN PHASE LI02 LI02
LI01
LI02 LI02
LI02
SCHEMATIC DESIGN PHASE LI01
LI01
DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
DRAWING TITLE
MASTER BEDROOM 01 ENLARGEMENT R.C.P & LIGHTING PLAN JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
2
LIGHTING PLAN
PAPER SIZE DRAWING SCALE
A1
1:25
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-FF10-D
FOR TENDERING
FIXTURE
BASIN MIXER
CODE
DESCRIPTION
FR-FI22
FREE STANDING FAUCET AND MIXER BLACK FINISH SAMPLE TO BE PROVIDED FOR CLIENT CONFIRMATION WALL MOUNTED BIDET
HAND HELD BIDET
BIDET MIXER
FR-FI10
FR-FI20
BLACK FINISH
SINGLE LEVER BIDET MIXER BLACK FINISH
SUPPLIER newform BLINK CHIC Art. 71002
IMAGE
COUNT
2
SCARABEO WALL-MOUNTED BIDET MOON CODE: 5521
newform BLINK Art. 70825
1
1
SAMPLE TO BE PROVIDED FOR CLIENT CONFIRMATION
TOILET SEAT
TOILET FLUSH PLATE
TRASH BIN
FR-FI01
FR-FI16
FR-AC02
WALL MOUNTED TOILET SEAT
SCARABEO
BLACK FINISH
Moon Wall-mounted WC 45 Moon CODE: 5524CL
WALL MOUNTED FLUSH PLATE
Newform DELTA ZERO
STAINLESS STEEL FINISH
Art. 887
FREE STANDING TRASH BIN
1
1
BY CONTRACTER
1
BY CONTRACTER
1
BLACK FINISH
TOILET PAPER HOLDER
WALL MOUNTED PAPER FR-AC01 HOLDER BLACK FINISH
GENERAL NOTES:
CUSTOM FREE STANDING WASH BASIN MADE WASH BASIN
BATHTUB
FR-FI11
BLACK FINISH
2 REFER TO DRAWING ..\..\RENDERS\MASTER 2,3\insert\4.jpg
FREE STANDING BATHTUB
AQUATICA COLETTA BLACK FREESTANDING BATHTUB
1
ALPINE FIONA FREESTANDING BATH MIXER SKU: 100207-1BK
1
FR-FI12 BLACK FINISH
BATHTUB MIXER
FR-FI21
FREE STANDING BATHTUB FAUCET / MIXER BLACK FINISH
PRESS-BUTTON FR-AC03 DRAIN
PRESS -BUTTON DRAIN BLACK FINISH
newform BLINK Art. 230 1”1/4 press-button drain
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations. REVISION: 05
1
04 03 02 01
TOILET BRUSH
HEAD SHOWER
FR-AC04 WALL MOUNTED BRUSH BLACK FINISH
FR-FI06
WALL MOUNTED HEAD SHOWER BLACK FINISH
HAND SHOWER
NO. DESCRIPTION
BY CONTRACTER
1
DATE
MR. MOHAMED FARUQE OWNER
VILLA 123
newform Art. 26534 OR EQUIVALENT
WALL MOUNTED
newform
BLACK HAND SHOWER
CODE: Art. 823
FR-FI18
PROJECT
1
DUBAI LOCATION
CONCEPT DESIGN PHASE
1
SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
SHOWER MIXER
WALL MOUNTED FR-FI19
newform Art. 67688E
1
DRAWING TITLE
BLACK SHOWER MIXER
MASTER BEDROOM 01 ENLARGEMENT FIXTURE SCHEDULE JULY 2023
ISSUE DATE
*** SAMPLES TO BE PROVIDED FOR CLIENT CONFIRMATION. DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
1:25
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-FF10-E
CD05 ID002 CD05 ID001
CD16 ID003
CD15 ID003 B.O.S +8.22
B.O.S +8.22
F.C.L +7.85
F.C.L +7.85
F.C.L +7.60
F.C.L +7.60
FOR TENDERING
MATERIAL LEGEND MATERIAL
CODE
30
04
20
30
30
F.
20
1
ABK SENSI UP MARQUINIA SELECT LUX RECTIFIED TILE (120 x 270)
2
PAINT FINISH
9
MIRROR
15
DARK TINTED GLASS PANELS
20
WOOD VENEER TO MATCH DOORS FINISH
25
CLEAR GLASS
26
OPAQUE GLASS
27
LAMINATE WOOD
30
WOOD VENEER TYPE 2
F.
WARDROBE
DRAWER
FD13 ID001
F.F.L +4.85
F.F.L +4.85
ELEVATION 01
1
ELEVATION 02
2
CD28 ID004
CD28 ID004
CD14 ID003
CD28 ID004
B.O.S +8.22
B.O.S +8.22 F.C.L +8.00 F.C.L +7.85
B.O.S +8.22
F.C.L +8.00
F.C.L +8.00
F.C.L +7.85
F.C.L +7.85
F.C.L +7.60
26 F.
SHOES SHELVES
15
15
1
15
26
20
15
26
9
26
F.
15
26
F.
GENERAL NOTES:
15
FR-FI11
DRAWER
FD10 ID001
15
15
15
15
15
DWR DWR DWR DWR
DWR DWR DWR DWR
DWR
DWR
DWR
DWR
DWR
DWR
DWR
DWR
DWR
DWR
F.
20 DRAWER
FD10 ID001
DRAWER 20
FD10 ID001
FD07 ID001
DRAWER
F.F.L +4.85
F.F.L +4.85
F.F.L +4.85
3
ELEVATION 03
4
ELEVATION 04
5
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
ELEVATION 05 REVISION: 05
CD13 ID003
CD15 ID003
CD05 ID002
03
B.O.S +8.22
B.O.S +8.22 B.O.S +8.22
CD13 ID003
F.C.L +8.00
04
CD13 ID003
F.C.L +8.00
CD05 ID002
F.C.L +8.00
02 01 NO. DESCRIPTION
DATE
F.C.L +7.85
MR. MOHAMED FARUQE
F.C.L +7.60
F.C.L +7.60
OWNER
F.C.L +7.60 FR-FI06
VILLA 123
25 PROJECT
F.
DUBAI
F.
LOCATION
25
25
25
25
F.
F.
F.
F.
25
25
GLASS PANEL 1 1
F.
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE
1
DESIGN DEVELOPMENT PHASE FR-FI18
CONSTRUCTION DRAWINGS PHASE FR-FI21
FR-FI19
FD13 ID001
FR-FI12
FD10 ID001
FD02 ID001
FD10 ID001
DRAWING TITLE
MASTER BEDROOM 01 ENLARGEMENT INTERIOR ELEVATIONS JULY 2023
ISSUE DATE
F.F.L +4.85
F.F.L +4.85 F.F.L +4.85
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
6
ELEVATION 06
7
ELEVATION 07
8
ELEVATION 08
PAPER SIZE DRAWING SCALE
A1
1:25
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-FF10-F
CD05 ID002
CD13 ID003
B.O.S +8.22
CD13 ID003
B.O.S +8.22
CD26 ID004
B.O.S +8.22
FOR TENDERING
CD05 ID002
F.C.L +8.00 F.C.L +8.00
F.C.L +7.75 F.C.L +7.60
F.C.L +7.60 F.C.L +7.60
FR-FI06
FR-FI06
26 F.
MATERIAL LEGEND CODE
1
25
1
9
25
4
1
FR-FI22
ABK SENSI UP MARQUINIA SELECT LUX RECTIFIED TILE (120 x 270)
2
PAINT FINISH
9
MIRROR
DRAWER
15
DARK TINTED GLASS PANELS
DRAWER
20
WOOD VENEER TO MATCH DOORS FINISH
25
CLEAR GLASS
26
OPAQUE GLASS
27
LAMINATE WOOD
30
WOOD VENEER TYPE 2
26
F.
F.
F.
FR-FI11
FR-FI16
FR-FI01
FR-FI22
1
26 1
FR-AC05 F.
FR-FI11
FR-AC01 FR-FI20 FR-FI10
1
FR-FI11
1
DRAWER
DRAWER
FD02 ID001
FD02 ID001
27 DRAWER
27 DRAWER
BENCH
F.F.L +4.85
1
1
F.F.L +4.85
MATERIAL
F.F.L +4.85
ELEVATION 09
9
ELEVATION 10
10
CD26 ID004
CD17 ID003
11
ELEVATION 11
CD01 ID002 B.O.S +8.22
B.O.S +8.22
B.O.S +8.22
CD01 ID002 F.C.L +7.75
F.C.L +7.70 F.C.L +7.60
F.C.L +7.60
25
F.C.L +7.70 F.C.L +7.60
25
26
F.
F.
26
25
26
GENERAL NOTES:
1
F.
F.
FR-FI11
DRAWER FR-FI10
FD02 ID001
FD02 ID001
FR-FI10
DRAWER
F.F.L +4.85
F.F.L +4.85
F.F.L +4.85
12
ELEVATION 12
13
ELEVATION 13
14
ELEVATION 14
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations. REVISION: 05 04 03 02 01 NO. DESCRIPTION
DATE
MR. MOHAMED FARUQE OWNER
VILLA 123 PROJECT
DUBAI LOCATION
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
DRAWING TITLE
MASTER BEDROOM 01 ENLARGEMENT INTERIOR ELEVATIONS JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
1:25
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-FF10-G
FOR TENDERING
TO MATCH BATHROOM TILE
TO MATCH BATHROOM TILE
WOOD VENEER TO MATCH WOODEN CLADDING
TO MATCH BATHROOM TILE DRAWER LAMINATE WOODEN DRAWERS
LAMINATE WOODEN DRAWERS
DETAIL C DETAIL A
2
HIDDEN LIGHT WITH DIFFUSER
1
DETAIL C
DETAIL B
DETAILS A & B
HIDDEN LIGHT WITH DIFFUSER
LI01 GENERAL NOTES:
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
MIRROR
MIRROR
REVISION: 05 04 03 02 01 NO. DESCRIPTION
FR-FI20
FR-FI20
DATE
MR. MOHAMED FARUQE OWNER
FR-FI11
DETAIL A
FR-FI11
FR-FI11
VILLA 123 PROJECT
DETAIL C LI01
DUBAI LOCATION
HIDDEN LIGHT WITH DIFFUSER
DRAWER
DRAWER
DRAWER
DRAWER
CONCEPT DESIGN PHASE
DRAWER
SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
DRAWER
DRAWER
DRAWER
DRAWING TITLE
MASTER BEDROOM 01 ENLARGEMENT DETAILS JULY 2023
ISSUE DATE
DETAIL B
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
3
BATHROOM SINK ELEVATION
4
PAPER SIZE DRAWING SCALE
BATHROOM SINK SECTION 5
DRESSER ELEVATION
4
DRESSER SECTION
A1
-
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-FF10-H
FOR TENDERING
GENERAL NOTES:
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations. REVISION: 05 04 03 02 01 NO. DESCRIPTION
DATE
MR. MOHAMED FARUQE OWNER
VILLA 123 PROJECT
DUBAI LOCATION
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
DRAWING TITLE
TYPICAL MASTER BEDROOM 02,03 ENLARGEMENT RENDER JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
-
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-FF13-001
FOR TENDERING
GENERAL NOTES:
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations. REVISION: 05 04 03 02 01 NO. DESCRIPTION
DATE
MR. MOHAMED FARUQE OWNER
VILLA 123 PROJECT
DUBAI LOCATION
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
DRAWING TITLE
TYPICAL MASTER BEDROOM 02,03 ENLARGEMENT RENDER JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
-
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-FF13-002
FOR TENDERING
GENERAL NOTES:
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations. REVISION: 05 04 03 02 01 NO. DESCRIPTION
DATE
MR. MOHAMED FARUQE OWNER
VILLA 123 PROJECT
DUBAI LOCATION
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
DRAWING TITLE
TYPICAL MASTER BEDROOM 02,03 ENLARGEMENT RENDER JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
-
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-FF13-004
FOR TENDERING
ELEV 17 ELEV 16
ELEV 15
WC
ELEV 14
WC
MASTER BEDROOM 02 DRESSING
ELEV 13 ELEV 12
FF
ELEV 11
15 MASTER BEDROOM 02 DRESSING FF 15
ELEV 10 SHOWER ELEV 5
SHOWER
ELEV 9 ELEV 8
ELEV 7 ELEV 6
MASTER BEDROOM 02 BATHROOM FF
14 MASTER BEDROOM 02 BATHROOM FF 14
OPEN TO SKY
GENERAL NOTES:
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
OPEN TO SKY
ELEV 1 ELEV 3
ELEV 4 ELEV 2
MASTER BEDROOM 02 FF 13
REVISION: 05 04 03
MASTER BEDROOM 02 FF
02
13
01 NO. DESCRIPTION
DATE
MR. MOHAMED FARUQE OWNER
VILLA 123 PROJECT
DUBAI LOCATION
1
FLOORING PLAN
2
REFLECTED CEILING PLAN CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
DRAWING TITLE
TYPICAL MASTER BEDROOM 02,03 ENLARGEMENT FLOORING PLAN & R.C.P JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
1:25
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-FF13-A
FOR TENDERING FLOORING LAYOUT LEGEND CODE
DESCRIPTION
SYMBOL
LEA CERAMICHE-BIOSELECT - OAK VANILLA 20*120cm NAT.
TL-01
DESVRES ARIANA-DORICA AVORIO 120*120cm NAT.
TL-04
TRANSITION STRIP
FD
SHOWER FLOOR DRAIN
FURNITURE LAYOUT LEGEND
FR-AC04 FR-FI16
N
FR-FI01
F.F.L. +4.85
CODE
DESCRIPTION
FR-S06
SOFA
FR-T11
TABLE
FR-BE02
BED
FR-FI01
WC
FR-FI06
HEAD SHOWER
FR-FI10
BIDET
FR-FI11
MASTER SINKS
FR-FI12
BATHTUB
TL-04
FR-AC01
FR-FI22
TS
FR-AC02 WC FR-FI10
FR-FI20
SP SP F.F.L. +4.85
MASTER BEDROOM 02 DRESSING
FR-FI11 FR-FI11 FR-FI18 FR-FI19
FF
TL-01
15 F.F.L. +4.85 TL-04
SHOWER
FD
FR-FI06
FR-FI22
FR-FI21 F.F.L. +4.85 TL-01
FR-FI12
MASTER BEDROOM 02 BATHROOM FF 14
SP
GENERAL NOTES:
TS
OPEN TO SKY
OPEN TO SKY
FR-BE02
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
F.F.L. +4.85 TL-01
REVISION: 05 04 03
MASTER BEDROOM 02 FF 13
02 01
32" TV
NO. DESCRIPTION
DATE
FR-CH05
MR. MOHAMED FARUQE OWNER
VILLA 123 PROJECT
DUBAI LOCATION
1
FURNITURE PLAN
2
FLOORING PLAN CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
TYPICAL MASTER BEDROOM 02,03 ENLARGEMENT DRAWING TITLE FURNITURE AND DIMENSIONS PLANS JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
1:25
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-FF13-B
FOR TENDERING
REFLECTED CEILING PLAN LEGEND DESCRIPTION
HATCH
F.C.L. +7.85 B.O.S. +8.22
LINTEL F.C.L. +7.95 B.O.S. +8.22
F.C.L. +7.95 B.O.S. +8.22
LI01
F.C.L. +7.60 B.O.S. +8.22
F.C.L. +7.60 B.O.S. +8.22
LI01
LI01 LI02
F.C.L. +7.70 B.O.S. +8.22
LI22
LI02
LI07C
LI07A AP
LIGHTING LAYOUT LEGEND CODE
AP
LI01
F.C.L. +7.85 B.O.S. +8.22 F.C.L. +7.60 B.O.S. +8.22
SYMBOL
DESCRIPTION
LI01
HIDDEN LIGHT
LI02
SPOT LIGHT
LI07A
TRACK WITH LED LINEAR LIGHT
LI07C
TRACK WITH DIRECTIONAL PROJECTOR LIGHT
LI020
FLOOR LAMP
LI022
SCONCE
LI02 F.C.L. +7.70 B.O.S. +8.22
F.C.L. +7.60 B.O.S. +8.22
LI02 F.C.L. +7.85 B.O.S. +8.22
F.C.L. +8.00 B.O.S. +8.22
F.C.L. +7.60 B.O.S. +8.22
LINTEL +7.92
GENERAL NOTES:
OPEN TO SKY
OPEN TO SKY
LI07C
LI02
LI02
LI02
LI02
LI02
LI02
LI02
LI02
LI02
LI02
LI02
LI02
F.C.L. +7.85 B.O.S. +8.22
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations. REVISION: 05 04 03
LI20
F.C.L. +8.00 B.O.S. +8.22
02 01 NO. DESCRIPTION
DATE
MR. MOHAMED FARUQE OWNER
1
FLOORING PLAN
2
VILLA 123
REFLECTED CEILING PLAN PROJECT
DUBAI LOCATION
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
DRAWING TITLE
TYPICAL MASTER BEDROOM 02,03 ENLARGEMENT R.C.P & LIGHTING PLAN JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
1:25
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-FF13-C
FOR TENDERING
FIXTURE
BASIN MIXER
CODE
DESCRIPTION
FR-FI22
FREE STANDING FAUCET AND MIXER BLACK FINISH SAMPLE TO BE PROVIDED FOR CLIENT CONFIRMATION WALL MOUNTED BIDET
HAND HELD BIDET
BIDET MIXER
FR-FI10
FR-FI20
BLACK FINISH
SINGLE LEVER BIDET MIXER BLACK FINISH
SUPPLIER newform BLINK CHIC Art. 71002
IMAGE
COUNT
2
SCARABEO WALL-MOUNTED BIDET MOON CODE: 5521
newform BLINK Art. 70825
1
1
SAMPLE TO BE PROVIDED FOR CLIENT CONFIRMATION
TOILET SEAT
TOILET FLUSH PLATE
TRASH BIN
FR-FI01
FR-FI16
FR-AC02
WALL MOUNTED TOILET SEAT
SCARABEO
BLACK FINISH
Moon Wall-mounted WC 45 Moon CODE: 5524CL
WALL MOUNTED FLUSH PLATE
Newform DELTA ZERO
STAINLESS STEEL FINISH
Art. 887
FREE STANDING TRASH BIN
1
1
BY CONTRACTER
1
BY CONTRACTER
1
BLACK FINISH
TOILET PAPER HOLDER
WALL MOUNTED PAPER FR-AC01 HOLDER BLACK FINISH
GENERAL NOTES:
CUSTOM FREE STANDING WASH BASIN MADE WASH BASIN
BATHTUB
FR-FI11
BLACK FINISH
2 REFER TO DRAWING ..\..\RENDERS\MASTER 2,3\insert\4.jpg
FREE STANDING BATHTUB
AQUATICA COLETTA BLACK FREESTANDING BATHTUB
1
ALPINE FIONA FREESTANDING BATH MIXER SKU: 100207-1BK
1
FR-FI12 BLACK FINISH
BATHTUB MIXER
FR-FI21
FREE STANDING BATHTUB FAUCET / MIXER BLACK FINISH
PRESS-BUTTON FR-AC03 DRAIN
PRESS -BUTTON DRAIN BLACK FINISH
newform BLINK Art. 230 1”1/4 press-button drain
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations. REVISION: 05
1
04 03 02 01
TOILET BRUSH
HEAD SHOWER
FR-AC04 WALL MOUNTED BRUSH BLACK FINISH
FR-FI06
WALL MOUNTED HEAD SHOWER BLACK FINISH
HAND SHOWER
NO. DESCRIPTION
BY CONTRACTER
DATE
1
MR. MOHAMED FARUQE OWNER
VILLA 123
newform Art. 26534 OR EQUIVALENT
WALL MOUNTED
newform
BLACK HAND SHOWER
CODE: Art. 823
FR-FI18
PROJECT
1
DUBAI LOCATION
CONCEPT DESIGN PHASE
1
SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
SHOWER MIXER
WALL MOUNTED FR-FI19
newform Art. 67688E
1
DRAWING TITLE
BLACK SHOWER MIXER
TYPICAL MASTER BEDROOM 02,03 ENLARGEMENT BATHROOM FIXTURES SCHEDULE JULY 2023
ISSUE DATE
*** SAMPLES TO BE PROVIDED FOR CLIENT CONFIRMATION. DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
-
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-FF13-D
CD03 ID002
B.O.S +8.22
F.C.L +8.00 F.C.L +7.85
FOR TENDERING
CD03 ID002
B.O.S +8.22
F.C.L +8.00 F.C.L +7.85
CODE
20 F.
24
24
24
24
24
24
20 F.
2
9
MATERIAL
2
PAINT FINISH
8
DORICA AVORIO TILE (120x280)
9
MIRROR
10
STONE
15
TINTED GLASS PANELS
20
WOOD VENEER
23
LAMIATE WOOD TO MATCH DOORS FINISH
24
ROTATING VENEER WOOD PANELS
26
OPAQUE GLASS
27
LAMINATE WOOD TYPE 2
F.
FD10 ID001
FD05 ID001
FD05 ID001
FD10 ID001
F.F.L +4.85 F.F.L +4.85
ELEVATION 01
1
ELEVATION 02
2
CD03 ID002
CD11 ID002
CD02 ID002
B.O.S +8.22 B.O.S +8.22
CD02 ID002
F.C.L +8.00 F.C.L +7.85 F.C.L +7.85 F.C.L +7.70 F.C.L +7.60
8 LI01 15
15
15
15
SHOES SHELVES 9
10
GENERAL NOTES:
9
FR-FI22 LI01
FR-FI22
FR-FI11
23
9
23
FR-AC05 8
FR-FI11 8
FD10 ID001
DRAWER
FD04 ID001
DRAWER 8
8
DRAWER 27
DRAWER 27 F.F.L +4.85
8
F.F.L +4.85
ELEVATION 03
3
ELEVATION 08
8
5
DWR DWR DWR DWR
DWR DWR DWR DWR
DWR
DWR
DWR
DWR
DWR
DWR
FD04 ID001
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
ELEVATION 05 REVISION: 05
CD02 ID002
04 03
CD03 ID002
B.O.S +8.22
02
CD18 ID003
B.O.S +8.22 F.C.L +7.95 F.C.L +7.85
01 NO. DESCRIPTION
F.C.L +8.00
DATE
MR. MOHAMED FARUQE OWNER
F.C.L +7.60
VILLA 123 PROJECT
DUBAI LOCATION
CONCEPT DESIGN PHASE 15
15
15
15
15
2
2
4
2
2
2
SCHEMATIC DESIGN PHASE 20
24
24
24
24
F.
24
24
20 F.
DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
32" TV
FD04 ID001
FD10 ID001 DWR
DWR
DWR
DWR
DWR
DWR
DRAWING TITLE
FD01 ID001
FD10 ID001
TYPICAL MASTER BEDROOM 02,03 ENLARGEMENT INTERIOR ELEVATIONS JULY 2023
ISSUE DATE
F.F.L +4.85
23
F.F.L +4.85
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
4
ELEVATION 04
6
ELEVATION 06
PAPER SIZE DRAWING SCALE
A1
1:25
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-FF13-E
CD02 ID002
CD01 ID002
CD18 ID002 CD09 ID002
B.O.S +8.22 B.O.S +8.22
FOR TENDERING
B.O.S +8.22 B.O.S +8.22
CD06 ID002
F.C.L +8.00 F.C.L +7.70 F.C.L +7.60
F.C.L +7.60
F.C.L +7.70 F.C.L +7.60
F.C.L +7.60
FR-FI06 FR-FI06
CODE
MATERIAL
2
PAINT FINISH
8
DORICA AVORIO TILE (120x280)
9
MIRROR
10
STONE
15
TINTED GLASS PANELS
20
WOOD VENEER
23
LAMIATE WOOD TO MATCH DOORS FINISH
24
ROTATING VENEER WOOD PANELS
26
OPAQUE GLASS
27
LAMINATE WOOD TYPE 2
8 26 F.
26
9
26 F.
9 26 F.
9
8
8
26 F.
FR-FI18
FR-FI19
FR-FI21 FR-FI21
FD04 ID001
FR-FI12
FD02 ID001
FD10 ID001
FD06 ID001
FD02 ID001
FD06 ID001
FR-FI12
F.F.L +4.85 F.F.L +4.85
F.F.L +4.85
F.F.L +4.85
7
ELEVATION 07
9
CD05 ID002 B.O.S +8.22
CD01 ID002
CD06 ID002 B.O.S +8.22
ELEVATION 09
10
ELEVATION 10
11
ELEVATION 11
CD01 ID002 B.O.S +8.22 B.O.S +8.22
CD05 ID002
CD06 ID002
B.O.S +8.22
CD05 ID002 F.C.L +7.70 F.C.L +7.60
F.C.L +7.60
F.C.L +7.60
F.C.L +7.70 F.C.L +7.60
F.C.L +7.60
FR-FI06 FR-FI06
26 F.
8
26
9
8
GENERAL NOTES:
8
26
FR-FI16
FD06 ID001
FD02 ID001
FD06 ID001
FD02 ID001 FR-FI01
FD06 ID001
FR-FI01
FR-AC01 FR-FI20 FR-FI10
FD02 ID001
F.F.L +4.85
F.F.L +4.85
F.F.L +4.85
12
ELEVATION 12
F.F.L +4.85
13
ELEVATION 13
F.F.L +4.85
14
ELEVATION 14
15
ELEVATION 15 16
26 F.
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
ELEVATION 16 REVISION: 05 04 03
CD06 ID002
CD01 ID002
B.O.S +8.22
02 01 NO. DESCRIPTION
DATE
MR. MOHAMED FARUQE
F.C.L +7.70 F.C.L +7.60
OWNER
VILLA 123 PROJECT
DUBAI LOCATION
9
CONCEPT DESIGN PHASE
8
SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
DRAWING TITLE
FD06 ID001
TYPICAL MASTER BEDROOM 02,03 ENLARGEMENT INTERIOR ELEVATIONS
FR-FI01
JULY 2023
ISSUE DATE
F.F.L +4.85 DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
17
ELEVATION 17
PAPER SIZE DRAWING SCALE
A1
1:25
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-FF13-F
FOR TENDERING
DORICA AVORIO TILE 120x280CM
HIDDEN LIGHT WITH DIFFUSER
TO MATCH BATHROOM TILE
WARDROBE
WOOD CLADDING TO MATCH BATHROOM TILE
TO MATCH BATHROOM TILE
MIRROR (FIXED PANEL) LAMINATE WOODEN DRAWERS
LAMINATE WOODEN DRAWERS DETAIL A
1
DETAILS A & B
HIDDEN LIGHT WITH DIFFUSER
2
DETAIL B
WALL DETAIL
BATHROOM TILE
PORCELAIN SHELF TO MATCH DORICA AVORIO TILE
HIDDEN LIGHT WITH DIFFUSER
HIDDEN LIGHT WITH DIFFUSER
3
DETAIL C
GENERAL NOTES:
DETAIL A
DETAIL C DORICA AVORIO TILE 120x280CM HIDDEN LIGHT WITH DIFFUSER
MIRROR MIRROR
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations. REVISION: 05 04 03 02 01 NO. DESCRIPTION
FR-FI22
DATE
FR-FI22 FR-FI11
DETAIL A FR-FI11
MR. MOHAMED FARUQE
PORCELAIN SHELF TO MATCH DORICA AVORIO TILE
OWNER
HIDDEN LIGHT WITH DIFFUSER
FR-FI11
VILLA 123 PROJECT
DUBAI LOCATION
DRAWER
DRAWER
CONCEPT DESIGN PHASE
DRAWER
SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE
DRAWER
CONSTRUCTION DRAWINGS PHASE
DRAWER
DRAWER DRAWING TITLE
DETAIL B
TYPICAL MASTER BEDROOM 02,03 ENLARGEMENT DETAILS JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
5 4
BATHROOM SINK ELEVATION
BATHROOM SINK SECTION 6
SHOWER NICHE ELEVATION
7
SHOWER NICHE SECTION
PAPER SIZE DRAWING SCALE
A1
-
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-FF13-G
FOR TENDERING
STRUCTURAL SLAB
5x5 CM SUBSTRUCTURE
1
PLAN
ROTATION MECHANISM
GYPSUM BOARD FALSE CEILING
ROTATING WOOD PANELS
ROTATING WOOD PANELS
GENERAL NOTES:
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
WOOD CLADDING 4x4cm SUBSTRUCTURE
ROTATION ROD / SUPPORT
FIXED PANEL
REVISION: 05 04
FIXED PANEL
03 02 01 NO. DESCRIPTION
DATE
MR. MOHAMED FARUQE OWNER
VILLA 123 PROJECT
ROTATION MECHANISM
DUBAI LOCATION
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
3
DETAIL
DRAWING TITLE
TYPICAL MASTER BEDROOM 02,03 ENLARGEMENT DETAILS ROTATING WOODEN PANELS JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
2
ELEVATION
PAPER SIZE DRAWING SCALE
A1
-
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-FF13-H
FOR TENDERING SP
ELEV 1 ELEV 3
LOBBY 01
ELEV 2
RF 01 TL-03 F.F.L. +8.65
LOBBY 01 RF
01
LIGHTING LAYOUT LEGEND CODE
SYMBOL
DESCRIPTION
LI01
HIDDEN LIGHT
LI02
SPOT LIGHT
FLOORING LAYOUT LEGEND CODE
DESCRIPTION
SYMBOL
LEA CERAMICHESLIMTECH DELIGHT CALACATA ORO 120*120CM POLISHED
TL-03
TS
TRANSITION STRIP
ELEV 4
ANNOTATION PLAN
1
3
FLOORING PLAN GENERAL NOTES:
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
LINTEL B.O.S. +10.92
F.C.L. +11.15 B.O.S. +11.30
F.C.L. +11.10 B.O.S. +11.30
LOBBY 01 RF
01 F.C.L. +11.00 B.O.S. +11.30
F.C.L. +11.10 B.O.S. +11.30
F.C.L. +11.00 B.O.S. +11.30
F.C.L. +11.15 B.O.S. +11.30
REVISION: 05 04 03 02 01 NO. DESCRIPTION
DATE
MR. MOHAMED FARUQE OWNER
F.C.L. +11.10 B.O.S. +11.30
VILLA 123 F.C.L. +11.15 B.O.S. +11.30
PROJECT
DUBAI LOCATION
F.C.L. +11.15 B.O.S. +11.30
F.C.L. +11.00 B.O.S. +11.30
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
LOBBY 01 ENLARGEMENT PLANS
DRAWING TITLE
JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
2
Arch. DINA HADDADIN
DIMENSIONS PLAN 4
REFLECTED CEILING PLAN
PAPER SIZE DRAWING SCALE
A1
1:25
PROJECT No
SHEET No
IE-RF01-A
CD22 ID003
CD05 ID002
B.O.S +11.30
CD05 ID002
CD03 ID002
FOR TENDERING
B.O.S +11.30 F.C.L +11.15
F.C.L +11.10 F.C.L +11.00
F.C.L +11.00
MATERIAL LEGEND CODE
2
2
FD02 ID001
FD05 ID001
F.F.L +8.65
FD05 ID001
MATERIAL
1
ABK -SENSI-UP-MARQUINIA SELECT (120*278 CM )
2
PAINT
18
DORICA GREIGE TILE (120x280)
25
CLEAR GLASS
FD10 ID001
F.F.L +8.65
LI01
ELEVATION 01
1
2
ELEVATION 02
LI07A
CD05 ID002
CD05 ID002
B.O.S +11.30
F.C.L +11.00
LI07A
GENERAL NOTES:
LI01
1
FD05 ID001
25
F.F.L +8.65
LI07A
3
ELEVATION 03
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations. REVISION: 05 04
CD03 ID002
5
CD03 ID002
LIGHTING PLAN
03 02 01 NO. DESCRIPTION
DATE
B.O.S +11.30
MR. MOHAMED FARUQE
F.C.L +11.15 OWNER
F.C.L +11.00
VILLA 123 PROJECT
DUBAI LOCATION
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE 2
DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
FD10 ID001
FD10 ID001 DRAWING TITLE
LOBBY 01 ENLARGEMENT INTERIOR ELEVATIONS
F.F.L +8.65
JULY 2023
ISSUE DATE
DRAWN BY:
4
ELEVATION 04
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
DESIGNED BY:
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-RF01-B
FOR TENDERING REFLECTED CEILING PLAN LEGEND DESCRIPTION
HATCH
LINTEL
F.C.L. +10.70 B.O.S. +11.30
LIGHTING LAYOUT LEGEND CODE
FR-FI18 FR-FI19 FR-FI06 ELEV 7
F.C.L. +10.95 B.O.S. +11.30 F.C.L. +10.85 B.O.S. +11.30
FR-FI15
SHOWER
FR-AC04
SYMBOL
LI01
HIDDEN LIGHT
LI02
SPOT LIGHT
FLOORING LAYOUT LEGEND CODE
ELEV 5
DESCRIPTION
DESCRIPTION
SYMBOL
FR-FI01
DESVRES ARIANA-DORICA AVORIO 120*280cm NAT.
TL-04
ELEV 6
FR-FI16 FR-AC02 FR-AC01
TS
TRANSITION STRIP
FD
SHOWER FLOOR DRAIN
FR-AC05
FR-FI07 FR-FI14
ELEV 1 ELEV 4
F.C.L. +10.85 B.O.S. +11.30
ELEV 2 ELEV 3
F.C.L. +10.95 B.O.S. +11.30 BATHROOM RF
BATHROOM RF
02
02 LINTEL B.O.S. +10.92
1
3
ANNOTATION PLAN
FURNITURE PLAN
REFLECTED CEILING PLAN
5
GENERAL NOTES:
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
LI01
LI02
LI02
LI02
LI02
FD
SHOWER
REVISION: 05
SP
04 03
TL-04 F.F.L. +8.65
02
LI02
01
LI02
NO. DESCRIPTION
DATE
MR. MOHAMED FARUQE OWNER
VILLA 123
BATHROOM RF
PROJECT
02 LI01
DUBAI LOCATION
2
DIMENSIONS PLAN
4
FLOORING PLAN
6
LIGHTING PLAN
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
BATHROOM ENLARGEMENT PLANS
DRAWING TITLE
JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
1:25
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-RF02-A
FOR TENDERING
FIXTURE
BASIN MIXER
CODE
FR-FI14
DESCRIPTION FREE STANDING FAUCET AND MIXER BLACK FINISH SAMPLE TO BE PROVIDED FOR CLIENT CONFIRMATION
HAND BIDET MIXER HAND HELD BIDET
TOILET SEAT
TOILET FLUSH PLATE
TRASH BIN
FR-FI15
FR-FI01
FR-FI16
FR-AC02
SUPPLIER newform N21 Art. 71720
COUNT
1
newform Art. 885
BLACK FINISH
External part. To combine with oncealed part 27852.
WALL MOUNTED TOILET SEAT
SCARABEO
BLACK FINISH
Moon Wall-mounted WC 45 Moon CODE: 5524CL
WALL MOUNTED FLUSH PLATE
Newform DELTA ZERO
STAINLESS STEEL FINISH
Art. 887
FREE STANDING TRASH BIN
IMAGE
1
1
1
BY CONTRACTER
1
BY CONTRACTER
1
BLACK FINISH
TOILET PAPER HOLDER
WALL MOUNTED PAPER FR-AC01 HOLDER BLACK FINISH
FREE STANDING WASH BASIN WASH BASIN
FR-FI07
PRESS-BUTTON FR-AC03 DRAIN
TOILET BRUSH
HEAD SHOWER
ABK-SENSI-UP-MARQUINIA TILES FINISH
PRESS -BUTTON DRAIN BLACK FINISH
FR-AC04 WALL MOUNTED BRUSH BLACK FINISH
FR-FI06
WALL MOUNTED HEAD SHOWER BLACK FINISH
CUSTOM MADE REFER TO DRAWING newform BLINK Art. 230 1”1/4 press-button drain
1
1
BY CONTRACTER
newform Art. 26534 OR EQUIVALENT
1
GENERAL NOTES:
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations. REVISION: 05 04 03
HAND SHOWER
WALL MOUNTED
newform
BLACK HAND SHOWER
CODE: Art. 823
FR-FI18
02
1
01 NO. DESCRIPTION
DATE
MR. MOHAMED FARUQE OWNER
SHOWER MIXER
WALL MOUNTED FR-FI19
newform Art. 67688E
1
BLACK SHOWER MIXER
VILLA 123 PROJECT
DUBAI LOCATION
TOWEL HOOK
FR-AC05
WALL MOUNTED TOWEL HOOK BLACK FINISH
BY CONTRACTER
1 CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE
TOWEL STORAGE
WALL MOUNTED FR-AC06 BLACK TOWEL STORAGE
BY CONTRACTER
CONSTRUCTION DRAWINGS PHASE
1 DRAWING TITLE
BATHROOM ENLARGEMENT FIXTURE SCHEDULE
*** SAMPLES TO BE PROVIDED FOR CLIENT CONFIRMATION.
JULY 2023
ISSUE DATE
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
DESIGNED BY:
Arch. DINA HADDADIN
PROJECT No
SHEET No
IE-RF02-B
FOR TENDERING
DORICA AVORIO TILE 120x280CM
HIDDEN LIGHT WITH DIFFUSER
CD05 ID002
CD01 ID002
CD01 ID002
CD05 ID002
B.O.S +11.30
B.O.S +11.30
B.O.S +11.30
F.C.L +10.85
F.C.L +10.85
F.C.L +10.85
MATERIAL LEGEND FR-FI06
CODE
9
8
1
ABK -SENSI-UP-MARQUINIA SELECT (120*278 CM )
8
DORICA AVORIO TILE (120x280)
9
MIRROR
26
OPAQUE GLASS
8 FR-AC06
1
FR-FI16
8
MATERIAL
FR-FI14
FR-FI15
FD02 ID001
FR-AC01 FR-FI01
FR-FI01
F.F.L +8.65
F.F.L +8.65
1
ELEVATION 01
FD02 ID001
F.F.L +8.65
FR-FI02
2
ELEVATION 02
3
ELEVATION 03
PORCELAIN SHELF TO MATCH DORICA AVORIO TILE
8
DETAIL A - NICHE DETAIL
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
DETAIL A
CD05 ID002 B.O.S +11.30
CD01 ID002
CD05 ID002 B.O.S +11.30
F.C.L +10.85
DORICA GREIGE TILE 120x280CM HIDDEN LIGHT WITH DIFFUSER
CD05 ID002 B.O.S +11.30
F.C.L +10.85
B.O.S +11.30
F.C.L +10.85
GENERAL NOTES:
F.C.L +10.85
REVISION: 05
FR-AC05
04 03 02 01
1
26
26
26
NO. DESCRIPTION
1
DATE
1
MR. MOHAMED FARUQE FD02 ID001
F.F.L +8.65
FD02 ID001
FD02 ID001
F.F.L +8.65
F.F.L +8.65
OWNER
FD02 ID001
PORCELAIN SHELF TO MATCH DORICA GREIGE TILE
VILLA 123 PROJECT
DUBAI
F.F.L +8.65 LOCATION
CONCEPT DESIGN PHASE
4
ELEVATION 04
5
ELEVATION 05
6
ELEVATION 06
7
ELEVATION 07
DETAIL A
SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
BATHROOM ENLARGEMENT ELEVATIONS AND DETAILS
DRAWING TITLE
JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
9
SHOWER NICHE ELEVATION
10
Arch. DINA HADDADIN
SHOWER NICHE SECTION PAPER SIZE DRAWING SCALE
A1
A.S
PROJECT No
SHEET No
IE-RF02-C
FOR TENDERING
F.F.L
1.1
F.F.L
3
F.F.L
FD01
FLOOR TILES AND FIXED GLASS PARTITION
FD02
3
F.F.L F.F.L
F.F.L
FD03
BATHROOM PORCELAIN FLOOR AND WALL TILES
DIRTY KITCHEN PORCELAIN FLOOR AND WALL TILES
FD04
PORCELAIN FLOOR AND MIRROR FD05
FLOOR TILES AND PLASTER WALL
FD06
BATHROOM OPAQUE GLASS PARTITION
13
F.F.L -3.25
+0.00 F.F.L
DOOR LEAF
VAR.
F.F.L -3.38
TRANSITION STRIP
18
2
7
-3.25 F.F.L
F.F.L +0.30 -3.38 F.F.L
-3.38 F.F.L
F.F.L -3.30
F.F.L -3.38
F.F.L
3
8
3
F.F.L
3
13
F.F.L +0.30
VAR.
+0.00 F.F.L
FLOOR TILES AND WOOD CLADDING
FD07
FD08
B1 STEP DETAL ( FLOORING WITH PEBBLES)
FD09
PORCELAIN CLADDED WALL WITH FLOOR TILES
FD10
FLOOR TILES AND FIXED GLASS WINDOW
FD11
TRANSITION STRIP DETAIL
FD12
B1 UPSTAND DETAIL
G.F KITCHEN
GENERAL NOTES:
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
70
69
1
F.F.L
10
8
F.F.L
9
1
1
VAR.
VAR.
+0.00 F.F.L
FD13
BATHROOM - BEDROOM TRANSITION WITH SLIDING DOORS
FD14
GLASS RAILING DETAIL - FIRST FLOOR
FD15
PLASTER WALL WITH WOOD SKIRTING
FD16
COLUMN DETAIL
FD17
WOOD SKIRTING DETAIL - G.F KITCHEN
LEA CERAMICHE- MASTERPIECE MASTER WHITE
REVISION:
F.F.L -3.25
05 LEA CERAMICHE- MASTERPIECE MASTER WHITE
04
2 F.F.L
03
4 02
NO. DESCRIPTION
3
3
01 DATE
LEA CERAMICHE- BIOSELECT-OAK VANILLA
F.F.L -3.70
MR. MOHAMED FARUQE OWNER
VILLA 123 PROJECT
FD18
PARTITION DETAIL
FD19
GARAGRE COLUMN TYPICAL DETAIL
FD20
GARAGRE WALL CLADDING TYPICAL DETAIL
FD21
BAESMENT CENIMA STEPS DETAIL
DUBAI LOCATION
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
FINISHING DETAILS FLOORING DETAILS
DRAWING TITLE
JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
A.S
Arch. DINA HADDADIN
PROJECT No
SHEET No
ID001
FOR TENDERING
HIDDEN LIGHT HIDDEN LIGHT
GYPSUM BOARD CEILING
GYPSUM BOARD CEILING
GYPSUM BOARD CEILING CURTAINS
GYPSUM BOARD CEILING
WOOD CLADDED COLUMN
CD01
CEILING DETAIL 01 -TYPICAL DETAIL
CEILING DETAIL 02 -TYPICAL DETAIL
CD02
CD03
CEILING DETAIL 03 -TYPICAL DETAIL
CD04
CEILING DETAIL 04 -TYPICAL DETAIL
Concrete Slab wall finish
2x2cm softwood nailer 5cm*5cm SUBSTRUCTURE TO HOLD SLIDING TRACK
suspension system by manufacture
GENERAL NOTES:
GYPSUM BOARD CEILING GYPSUM BOARD CEILING SLIDING TRACK
5x1.25 cm Gyp.board strip all around
12.5mm thick Gyp board false ceiling
2X1.25cm groove GYPSUM BOARD CEILING
GYPSUM BOARD CEILING
GYPSUM BOARD CEILING
CD05
CEILING DETAIL 05 -TYPICAL WALL CONNECTION DETAIL
CD06
CEILING DETAIL06 - SHOWER SLIDING DOOR
CD07
CEILING DETAIL07 - G.F FOYER/ LIVING ROOM
CD08
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
CEILING DETAIL08 - G.F FOYER REVISION: 05 04 03 02 01 NO. DESCRIPTION
5cm*5cm SUBSTRUCTURE TO HOLD SLIDING TRACK
DATE
STRUCTURAL SLAB
MR. MOHAMED FARUQE OWNER
VILLA 123
STRUCTURAL SLAB PROJECT
SLIDING TRACK
DUBAI LOCATION
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE
GYPSUM BOARD CEILING
DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
FINISHING DETAILS CEILING DETAILS
GYPSUM BOARD CEILING DRAWING TITLE
JULY 2023
ISSUE DATE
GYPSUM BOARD CEILING GYPSUM BOARD CEILING
CD09
CEILING DETAIL09 - BATHROOM SLIDING DOOR
CD10
CEILING DETAIL10 - WINDOW
CD11
CEILING DETAIL11 - BATHROOM TRANSITION
DESIGNED BY:
DRAWN BY:
GYPSUM BOARD CEILING
Arch. DALIA RAWABDEH
CD12
Arch. DINA HADDADIN
CEILING DETAIL12 PAPER SIZE DRAWING SCALE
A1
A.S
PROJECT No
SHEET No
ID002
FOR TENDERING
SLIDING TRACK
HIDDEN LIGHT WOODEN SLIDING DOOR
GYPSUM BOARD CEILING GYPSUM BOARD CEILING GYPSUM BOARD CEILING
GYPSUM BOARD CEILING
GYPSUM BOARD CEILING GYPSUM BOARD CEILING
CD13
CEILING DETAIL 13 - DRAPERY BOX WITH HIDDEN LIGHT
CD14
CEILING DETAIL 14 - WOODEN SLIDING DOOR
CD15
CEILING DETAIL 15 - WOODEN SLIDING DOORS
CD16
CEILING DETAIL 16 - WOODEN SLIDING DOORS
SLIDING TRACK U CHANNEL
WOODEN SLIDING DOOR
STRUCTURAL SLAB 8cm*8cm SUBSTRUCTURE TO HOLD SLIDING TRACK
BRASS PARTITION ROD GENERAL NOTES:
SLIDING TRACK
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
BRASS COVER GYPSUM BOARD CEILING HPL LOUVERS DOOR
GYPSUM BOARD CEILING
GYPSUM BOARD CEILING
CD17
CEILING DETAIL 17 - WOODEN SLIDING DOOR
CD18
CEILING DETAIL 18 - TYPICAL DETIAL
CD19
CEILING DETAIL 19 - B1 SLIDING DOOR DETAIL
CD20
CEILING DETAIL 20 - PARTITION DETAIL
REVISION: 05 04 03 02 01 NO. DESCRIPTION
DATE
MR. MOHAMED FARUQE OWNER
HIDDEN LIGHT
HIDDEN LIGHT
VILLA 123 PROJECT
DUBAI LOCATION
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE
GYPSUM BOARD CEILING
GYPSUM BOARD CEILING
PAINTED WOOD CLADDED SLAB
CONSTRUCTION DRAWINGS PHASE
FINISHING DETAILS CEILING DETAILS
DRAWING TITLE
PAINTED GYPSUM BOARED
JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
CD21
CEILING DETAIL 21 - WOODEN SLIDING DOOR
CD22
CEILING DETAIL 22 -TYPICAL DETAIL
CD23
CEILING DETAIL 23 -TYPICAL DETAIL
CD24
Arch. DINA HADDADIN
CEILING DETAIL 24 PAPER SIZE DRAWING SCALE
A1
A.S
PROJECT No
SHEET No
ID003
FOR TENDERING
HIDDEN LIGHT
HIDDEN LIGHT
HIDDEN LIGHT
GYPSUM BOARD CEILING
2CM SHADOW GAP
WOOD CLADDING
GYPSUM BOARD CEILING
GYPSUM BOARD CEILING
WOOD CLADDING
CD25
CEILING DETAIL 25 -TYPICAL DETAIL
CD26
GYPSUM BOARD CEILING
CEILING DETAIL 26 -TYPICAL DETAIL
CD27
CEILING DETAIL 27 -TYPICAL DETAIL
GYPSUM BOARD CEILING
CD28
CEILING DETAIL 28 -TYPICAL DETAIL
GYPSUM BOARD CEILING
GENERAL NOTES:
CD29
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
CEILING DETAIL 29 -GARAGE COLUMN TYPICAL DETAIL
REVISION: 05 04 03 02 01 NO. DESCRIPTION
DATE
MR. MOHAMED FARUQE OWNER
VILLA 123 PROJECT
GYPSUM BOARD CEILING
DUBAI LOCATION
CONCEPT DESIGN PHASE
HIDDEN LIGHT
SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
FINISHING DETAILS CEILING DETAILS
DRAWING TITLE
JULY 2023
ISSUE DATE
GYPSUM BOARD CEILING DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
CD30
CEILING DETAIL 30 -GARAGE WALL CLADDING TYPICAL DETAIL
CD31
CEILING DETAIL 31 - DRAPERY BOX
CD33
CEILING DETAIL 33 - DRAPERY BOX WITH HIDDEN LIGHT
CD32
Arch. DINA HADDADIN
CEILING DETAIL 32 - DRAPERY BOX PAPER SIZE DRAWING SCALE
A1
A.S
PROJECT No
SHEET No
ID004
FOR TENDERING
SEC A +0.45
23 X 300W X 157H MM
-3.15
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
BAESMENT FLOOR
GROUND FLOOR
SEC A 26 X 300W X 169H MM
+4.85
+0.45
GROUND FLOOR
24
25
26
27
28
30
29
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49 FIRST FLOOR
GENERAL NOTES:
SEC
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
A 24 X 300W X 158H MM
+8.65
+4.85
50
51
52
54
53
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
FIRST FLOOR
1
73 ROOF FLOOR
STAIR PLANS
REVISION:
DETAIL B
05
ABK-SENSI-UPMARQUINIA-SELECT
04
HIDDEN LIGHT WITH DIFFUSER CEMENT BOARED TO HOLD PORCELAIN CLADDING BLACK METAL HAND RAIL
03 02 01
ABK-SENSI-UPMARQUINIA-SELECT
NO. DESCRIPTION
DATE
LEA CERAMICHE-SLIMTECH DELIGHT-CALACATA ORO
STEEL PLATE
MR. MOHAMED FARUQE
LED LINEAR PROFILE WITH DIFFUSER
OWNER
VILLA 123
ABK-SENSI-UPMARQUINIA-SELECT
PROJECT
BLACK METAL HAND RAIL
DUBAI LOCATION
(4*4)STEEL TUBE ABK-SENSI-UPMARQUINIA-SELECT CONCEPT DESIGN PHASE
1CM GROOVE
SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE
ABK-SENSI-UPMARQUINIA-SELECT
CEMENT BOARED TO HOLD PORCELAIN CLADDING
CONSTRUCTION DRAWINGS PHASE
CEMENT BOARED TO HOLD PORCELAIN CLADDING
EMBEDDED PLATE TO HOLD STEPS
STAIRS DETAILS STAIR 02
DRAWING TITLE
JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
2
RAILING DETAIL- SECTION
3
RAILING DETAIL- DETAIL B
4
RAILING DETAIL- DETAIL A
A1
A.S
Arch. DINA HADDADIN
PROJECT No
SHEET No
ID100
FOR TENDERING
72
73
ROOF FLOOR
71 70 69 68 67 66 65 64 63 ABK-SENSI-UP-MARQUINIA-SELECT-120X278
0W 30 X 24
M HM 8 5 X1
62 61
60
59 58 57 56 55 54 53 52 51 50 49
FIRST FLOOR
48
49
FIRST FLOOR
47 46 45 44 43
GENERAL NOTES:
42
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
41 40 39 38
ABK-SENSI-UP-MARQUINIA-SELECT-120X278
37
0W
26
X
MM 9H 6 1
0 X3
35
36
34
33
32 31 30 29
REVISION:
28
05
27
04
26
03
25
02
24
01 NO. DESCRIPTION
GROUND FLOOR
23
23 22 21
GROUND FLOOR
DATE
MR. MOHAMED FARUQE OWNER
20 DETAIL A
18
19
VILLA 123 PROJECT
17 16
DUBAI LOCATION
15 14 13 ABK-SENSI-UP-MARQUINIA-SELECT-120X278
M HM
57
W
0 30 3X
2
X1
10
12 11
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
9
8 7
STAIRS DETAILS STAIR 02
DRAWING TITLE
6 5
JULY 2023
ISSUE DATE
4 3 2 1
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
1
STAIR SECTION
BAESMENT FLOOR
A1
A.S
Arch. DINA HADDADIN
PROJECT No
SHEET No
ID101
FOR TENDERING
GARDEN BATHROOM
DRIVER'S ROOM IN
SHOW GARAGE
LOBBY 02
IN
OUT
IN
OUT
OUT
SHOW GARAGE
SUNKEN GARDEN
WOOD CLADDED FIXED PANEL
DOOR HEIGHT TO FOLLOW EXTERIOR STONE COURSE
DOOR HEIGHT TO FOLLOW EXTERIOR STONE COURSE
-3.30 F.F.L
-3.30 F.F.L
DOOR TYPE
WD 02 DOOR TYPE
WD 01
WOOD CLADDED FIXED PANEL
DOOR HEIGHT TO FOLLOW EXTERIOR STONE COURSE
-3.30 F.F.L
LOCATION: Baesment Floor 1 Sunken garden / Garden bathroom QUANTITY DOOR DESCRIPTION: HDF Wooden hidden door,OUT finish (porcelain cladding to match the exterior walls) IN finish (natural wood veneer finish as per approved sample), coordinate with ironmongery schedule for hardware LAUNDRY ROOM
QUANTITY LOCATION: Baesment Floor 2 Show garage - Driver's room DOOR DESCRIPTION: HDF Wooden hidden door,OUT finish (porcelain cladding to match the walls) IN finish (natural wood veneer finish as per approved sample), coordinate with ironmongery schedule for hardware
DOOR TYPE
WD 03
LOCATION: Baesment Floor 1 Show garage - Lobby 02 (Service Entrance) QUANTITY DOOR DESCRIPTION: HDF Wooden hidden door,OUT finish (porcelain cladding to match the walls) IN finish (natural wood veneer finish as per approved sample), coordinate with ironmongery schedule for hardware
LOBBY LOBBY 02
MAID'S ROOM
STAIR 01
LOBBY
GENERAL NOTES:
-3.25 F.F.L
DOOR TYPE
WD 05 -3.25 F.F.L
QUANTITY LOCATION: Baesment Floor 2 Laundry room DOOR DESCRIPTION: HDF Wooden door, natural wood veneer finish as per approved sample; coordinate with ironmongery schedule for hardware
-3.25 F.F.L
IN
OUT
DOOR TYPE
WD 04
QUANTITY LOCATION: Baesment Floor 1 Lobby 02 / Stair 01 DOOR DESCRIPTION: HDF Wooden door, natural wood veneer finish as per approved sample; coordinate with ironmongery schedule for hardware
DOOR TYPE
WD 06
QUANTITY LOCATION: Baesment Floor 1 Maid's room DOOR DESCRIPTION: HDF Wooden door, natural wood veneer finish as per approved sample; coordinate with ironmongery schedule for hardware
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations. REVISION: 05 04
BATHROOM 01
LOBBY 01
03 OUT
02 01 IN
LOBBY 01
NO. DESCRIPTION
DATE
POWDER ROOM
MR. MOHAMED FARUQE OWNER
VILLA 123 PROJECT
DUBAI LOCATION
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE -3.25 F.F.L
+0.45 F.F.L
CONSTRUCTION DRAWINGS PHASE
+0.40 F.F.L
OUT
DOOR TYPE
WD 07
QUANTITY LOCATION: Baesment Floor 1 Bathroom 01 DOOR DESCRIPTION: HDF Wooden hidden door, natural wood veneer finish as per approved sample , coordinate with ironmongery schedule for hardware
DOOR TYPE
WD 08
IN
QUANTITY LOCATION: Ground floor Main door DOOR DESCRIPTION: Hard Wooden Pivot door,IN finish (natural wood veneer),OUT finish (HPL louvers) as approved sample, coordinate with ironmongery schedule for hardware
DOOR SCHEDULE
DRAWING TITLE
1
DOOR TYPE
WD 09
QUANTITY LOCATION: Ground floor 1 Powder room DOOR DESCRIPTION: HDF Hidden Wooden door,IN finish (Sensi-up-marquina-select) OUT finish (natural wood veneer finish, as per approved sample), coordinate with ironmongery schedule for hardware
JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
1:50
Arch. DINA HADDADIN
PROJECT No
SHEET No
IH100
FOR TENDERING
DIRTY KITCHEN
BANQUETTING AREA
DIRTY KITCHEN / FAMILY BATHROOM
STAIR 01
LOBBY 01
BANQUETTING AREA
+0.45 F.F.L
DOOR TYPE
WD 10
LOCATION: Ground floor 1 Lobby 01/ banquetting area QUANTITY DOOR DESCRIPTION: HDF Hidden Wooden door, natural wood veneer finish to match lobby 01 wood cladding finish (as per approved sample), coordinate with ironmongery schedule for hardware
+0.45 F.F.L
DOOR TYPE
WD 11
GUEST SUITE 02 / GUEST SUITE 03
LOCATION: Ground floor 2 Banquetting area/ dirty kitchen - family bathroom QUANTITY DOOR DESCRIPTION: HDF Wooden door, natural wood veneer finish as per approved sample; coordinate with ironmongery schedule for hardware
+0.45 F.F.L
DOOR TYPE
WD 12
LOCATION: Ground floor 1 Dirty kitchen / stair 01 QUANTITY DOOR DESCRIPTION: HDF Wooden door, natural wood veneer finish as per approved sample; coordinate with ironmongery schedule for hardware
GUEST SUITE 01 GUEST SUITE 01,03
LOBBY 04
LOBBY 04
GUEST SUITE BATHROOM 01,03
GENERAL NOTES:
+0.45 F.F.L
+0.45 F.F.L
+0.45 F.F.L
SECTION
DOOR TYPE
WD 13
LOCATION: Ground floor 2 Guest suite 02-03 / lobby 04 QUANTITY DOOR DESCRIPTION: HDF Hidden Wooden door, natural wood veneer finish (as per approved sample), coordinate with ironmongery schedule for hardware
DOOR TYPE
WD 14
QUANTITY LOCATION: Ground floor 1 Guest suite 01 / lobby 04 DOOR DESCRIPTION: HDF Hidden Wooden door, natural wood veneer finish (as per approved sample), coordinate with ironmongery schedule for hardware
DOOR TYPE
WD 15
LOCATION: Ground floor Guest suite 01,03 / Bathrooms QUANTITY DOOR DESCRIPTION: HDF Sliding Wooden door (ceiling mounted sliding door mechanism), natural wood veneer finish , as per approved sample , coordinate with ironmongery schedule for hardware
2
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations. REVISION: 05
GUEST SUITE 04,05
04
GUEST SUITE 04,05 / MASTER BEDROOM 02,03
MASTER BEDROOM 01
03 02
GUEST SUITE BATHROOM 04,05
01 NO. DESCRIPTION
DATE
LOBBY
LOBBIES
MR. MOHAMED FARUQE OWNER
VILLA 123 PROJECT
DUBAI LOCATION
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE +4.85 F.F.L
+4.85 F.F.L
CONSTRUCTION DRAWINGS PHASE
+4.85 F.F.L
SECTION
DOOR SCHEDULE
DRAWING TITLE
DOOR TYPE
WD 16
LOCATION: First floor 4 Lobbies / Guest suite 4&5, Master bedroom 2&3 QUANTITY DOOR DESCRIPTION: HDF Wooden door, natural wood veneer finish as per approved sample; coordinate with ironmongery schedule for hardware
DOOR TYPE
WD 17
LOCATION: First floor 1 Lobby / Master bedroom 1 QUANTITY DOOR DESCRIPTION: HDF Wooden door, natural wood veneer finish as per approved sample; coordinate with ironmongery schedule for hardware
DOOR TYPE
WD 18
LOCATION: First floor Guest suite 04,05/ Bathrooms QUANTITY DOOR DESCRIPTION: HDF Sliding Wooden door (ceiling mounted sliding door mechanism), natural wood veneer finish , as per approved sample , coordinate with ironmongery schedule for hardware
2
JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
1:50
Arch. DINA HADDADIN
PROJECT No
SHEET No
IH101
FOR TENDERING
MASTER BEDROOM BATHROOM MASTER BEDROOM BATHROOM
BATHROOM
MASTER BEDROOM 01
MASTER BEDROOM 01 LOBBY
+8.65 F.F.L +4.85 F.F.L
+4.85 F.F.L
SECTION
SECTION
DOOR TYPE
WD 19
LOCATION: First floor Master bedroom 01 / Bathrooms QUANTITY DOOR DESCRIPTION: HDF Sliding Wooden door (ceiling mounted sliding door mechanism), natural wood veneer finish , as per approved sample , coordinate with ironmongery schedule for hardware
1
DOOR TYPE
WD 20
LOCATION: First floor Master bedroom 01 / Bathrooms QUANTITY DOOR DESCRIPTION: HDF Sliding Wooden door (ceiling mounted sliding door mechanism), natural wood veneer finish , as per approved sample , coordinate with ironmongery schedule for hardware
LOBBY 02
1
DOOR TYPE
WD 21
LOCATION: Roof floor Lobby / Bathroom DOOR DESCRIPTION: HDF Wooden door, natural wood veneer finish as per approved sample; coordinate with ironmongery schedule for hardware
LOBBY 02
QUANTITY
1
DRIVER'S BATHROOM
DRIVER'S ROOM
PLAN DETAIL PUMP ROOM - ELECT.
MECH. ROOM
GENERAL NOTES:
-3.25 F.F.L -3.25 F.F.L
DOOR TYPE
WD 22
QUANTITY LOCATION: Baesment Floor Lobby 01 DOOR DESCRIPTION: Solid wood sliding door to match HPL louvers finish(ceiling mounted sliding door mechanism) , coordinate with ironmongery schedule for hardware
1
-3.25 F.F.L
LOCATION: Baesment Floor 1 Lobby 02 / Mech room QUANTITY DOOR DESCRIPTION: 3hours fire rated painted black steel door and frame with ventilation grills, coordinate with ironmongery schedule for hardware
DOOR TYPE
SD 01
DOOR TYPE
SD 02
-3.25 F.F.L
Lobby 02 / PUMP ROOM QUANTITY LOCATION: Baesment Floor 2 -ELECT. DOOR DESCRIPTION: 3hours fire rated painted black steel door and frame with ventilation grills, coordinate with ironmongery schedule for hardware
DOOR TYPE
AC 01
Driver's room / LOCATION: Baesment Floor Driver's bathroom QUANTITY DOOR DESCRIPTION: White PVC accordion door , coordinate with ironmongery schedule for hardware
1
IN/ SHOW GARAGE
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations. REVISION:
MAID'S BATHROOM
05 04 03 02
MAID'S ROOM
01 NO. DESCRIPTION
INDICATIONAL IMAGE-HPL LOUVERED SHUTTER
DATE
OUT/ RAMP
MR. MOHAMED FARUQE CABLE DRUM
DOOR HEIGHT TO FOLLOW EXTERIOR STONE COURSE
TORSION SPRINGS
OWNER
TORSION BAR -0.55 F.C.L
VILLA 123 PROJECT
DUBAI LOCATION
CONCEPT DESIGN PHASE
-3.25 F.F.L
SCHEMATIC DESIGN PHASE -3.30 F.F.L
EXTERIOR ELEVATION
DOOR TYPE
AC 02
LOCATION: Baesment Floor Maid's room / Maid's bathroom DOOR DESCRIPTION: White PVC accordion door , coordinate with ironmongery schedule for hardware
QUANTITY
1
DOOR TYPE
GSH 01
LOCATION: Baesment Floor DOOR DESCRIPTION: (Exterior)HPL Louvers finish, (Interior) to match HPL finish .
INTERIOR ELEVATION
DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
SECTION
Garage Shutter
QUANTITY
1
DOOR SCHEDULE
DRAWING TITLE
JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
1:50
Arch. DINA HADDADIN
PROJECT No
SHEET No
IH102
FOR TENDERING
F. +4.85 F.F.L
F.
F.
F.
-3.25 F.F.L
GLASS TYPE
TG 01
LOCATION: Baesment Floor DOOR DESCRIPTION:
Garden bathroom
+0.45 F.F.L
QUANTITY
1
GLASS TYPE
TG 02
Frameless, 8MM tempered opaque glass partition, coordinate with ironmongery schedule for hardware
+4.85 F.F.L
QUANTITY LOCATION: Ground Floor Guest suite 02 bathroom DOOR DESCRIPTION: 8MM tempered black tinted glass partition with 5cm frame, coordinate with ironmongery schedule for hardware
1
GLASS TYPE
TG 03
LOCATION: First floor DOOR DESCRIPTION:
Master bedroom 01
QUANTITY
1
GLASS TYPE
TG 04
Frameless, 8MM tempered clear glass partition, coordinate with ironmongery schedule for hardware
LOCATION: First floor DOOR DESCRIPTION:
Lobbies
QUANTITY
5
Frameless, 8MM tempered clear glass railing
GLASS DOOR B
ROOF BATHROOM
HPL LOUVERS DOOR
GUEST SUITE 02 BATHROOM A
GUEST SUITE 01 BATHROOM
GENERAL NOTES:
GLASS DOOR
HPL LOUVERS DOOR
F. F.
F.
F.
F.
+8.65 F.F.L +0.45 F.F.L
-3.25 F.F.L -3.38 F.F.L
+0.45 F.F.L
UPSTAND ELEVATION B
ELEVATION A
GLASS TYPE
TGD 01
LOCATION: Roof floor DOOR DESCRIPTION:
Bathroom
QUANTITY
1
GLASS TYPE
TGD 02
Frameless, 8MM tempered opaque glass door, coordinate with ironmongery schedule for hardware
LOCATION: Baesment Floor DOOR DESCRIPTION:
Service door under stair 02
QUANTITY
1
GLASS TYPE
TGD 03
Frameless, 8MM tempered clear Glass door, coordinate with ironmongery schedule for hardware
LOCATION: Ground Floor DOOR DESCRIPTION:
Guest suite 01 bathroom
QUANTITY
1
GLASS TYPE
TGD 04
Frameless, 8MM tempered opaque glass door, coordinate with ironmongery schedule for hardware
QUANTITY LOCATION: Ground Floor Guest suite 02 bathroom DOOR DESCRIPTION: 8MM tempered black tinted double glass door with 5cm frame, coordinate with ironmongery schedule for hardware
1
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations. REVISION: 05 04 03
B
02 01 NO. DESCRIPTION
GUEST SUITE 02 BATHROOM
DATE
GUEST SUITE 03 BATHROOM GUEST SUITE 04 BATHROOM
A
MR. MOHAMED FARUQE OWNER
GUEST SUITE 05 BATHROOM
VILLA 123 PROJECT
F.
F.
F.
F.
DUBAI
F. LOCATION
F.
F.
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE +0.45 F.F.L
DESIGN DEVELOPMENT PHASE
+0.45 F.F.L +4.85 F.F.L
ELEVATION A
+4.85 F.F.L
CONSTRUCTION DRAWINGS PHASE
ELEVATION B
GLASS SCHEDULE
DRAWING TITLE
GLASS TYPE
TGD 05
LOCATION: Ground Floor DOOR DESCRIPTION:
Guest suite 02 bathroom
QUANTITY
Frameless, 8MM tempered black tinted glass door, coordinate with ironmongery schedule for hardware
1
GLASS TYPE
TGD 06
LOCATION: Ground Floor DOOR DESCRIPTION:
Guest suite 03 bathroom
QUANTITY
Frameless, 8MM tempered opaque glass door, coordinate with ironmongery schedule for hardware
2
GLASS TYPE
TGD 07
LOCATION: First floor DOOR DESCRIPTION:
Guest suite 05 bathroom
QUANTITY
Frameless, 8MM tempered opaque glass door, coordinate with ironmongery schedule for hardware
1
GLASS TYPE
TGD 08
LOCATION: First floor DOOR DESCRIPTION:
Guest suite 04 bathroom
QUANTITY
2
JULY 2023
ISSUE DATE
Frameless, 8MM tempered opaque glass door, coordinate with ironmongery schedule for hardware DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
1:50
Arch. DINA HADDADIN
PROJECT No
SHEET No
IH103
FOR TENDERING
MASTER BEDROOM 01 BATHROOM
MASTER BEDROOM 02 BATHROOM
MASTER BEDROOM 03 BATHROOM
MASTER BEDROOM 01 BATHROOM OPENS TOWARD THE WASH ROOM
F.
F.
F. F.
F.
F.
F.
F.
+4.85 F.F.L
F.
+4.85 F.F.L
F.
+4.85 F.F.L
+4.85 F.F.L
SECTION
GLASS TYPE
LOCATION: First floor DOOR DESCRIPTION:
TGD 09
Master bedroom 01
QUANTITY
1
GLASS TYPE
TGD 10
Frameless, 8MM tempered opaque glass door, coordinate with ironmongery schedule for hardware
B
LOCATION: First floor DOOR DESCRIPTION:
Master bedroom 01
QUANTITY
1
GLASS TYPE
TGD 11
Frameless, 8MM tempered clear glass door, coordinate with ironmongery schedule for hardware
SECTION
LOCATION: First floor 1 Master bedroom 02 QUANTITY DOOR DESCRIPTION: 2 layers glass sliding door with exterior mirror finish (ceiling mounted sliding door mechanism), coordinate with ironmongery schedule for hardware
GLASS TYPE
TGD 12
LOCATION: First floor 1 Master bedroom 03 QUANTITY DOOR DESCRIPTION: 2 layers glass sliding door with exterior mirror finish (ceiling mounted sliding door mechanism), coordinate with ironmongery schedule for hardware
B
A
A
GUEST SUITE 02 BATHROOM
MASTER BEDROOM 03 BATHROOM
GENERAL NOTES:
F.
F.
F.
F.
F.
+4.85 F.F.L
GLASS TYPE
TGD 13
+4.85 F.F.L
SECTION
ELEVATION B
ELEVATION A
F.
ELEVATION A
LOCATION: First floor 1 Master bedroom 02 QUANTITY DOOR DESCRIPTION: Frameless, 8MM tempered opaque glass sliding door (ceiling mounted sliding door mechanism), coordinate with ironmongery schedule for hardware
GLASS TYPE
TGD 14
SECTION
ELEVATION B
LOCATION: First floor 1 Master bedroom 03 QUANTITY DOOR DESCRIPTION: Frameless, 8MM tempered opaque glass sliding door (ceiling mounted sliding door mechanism), coordinate with ironmongery schedule for hardware
GLASS TYPE
MI 01
LOCATION: Baesment Floor DOOR DESCRIPTION:
Bathroom 01 + Garden bathroom
QUANTITY
2
GLASS TYPE
MI 02
Frameless 6 mm Clear Backlit Mirror
LOCATION: Ground Floor DOOR DESCRIPTION:
Powder room
QUANTITY
1
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
Frameless 6 mm Clear Backlit Mirror REVISION: 05 04 03 02 01 NO. DESCRIPTION
DATE
MR. MOHAMED FARUQE OWNER
VILLA 123 PROJECT
DUBAI LOCATION
WOODEN CABINET
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
GLASS SCHEDULE
DRAWING TITLE
GLASS TYPE
MI 03
LOCATION: Ground Floor DOOR DESCRIPTION: 2 pieces - Frameless 6 mm Black Tinted Mirror
Dining area
QUANTITY
1
GLASS TYPE
MI 04
LOCATION: Ground Floor DOOR DESCRIPTION: 6 mm Backlit Clear Mirror with 1 cm-Thick Black Frame
family bathroom
QUANTITY
1
GLASS TYPE
MI 05
LOCATION: Ground Floor DOOR DESCRIPTION: Frameless 6 mm Clear Mirror
Guest suite 01
QUANTITY
1
GLASS TYPE
MI 06
LOCATION: Ground&First Floor DOOR DESCRIPTION:
Guest suite 01,02,03,04,05 bathrooms
QUANTITY
5
JULY 2023
ISSUE DATE
6 mm Backlit Clear Mirror with 1 cm-Thick Black Frame DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
1:50
Arch. DINA HADDADIN
PROJECT No
SHEET No
IH104
FOR TENDERING
GLASS TYPE
MI 07
LOCATION: Ground Floor DOOR DESCRIPTION:
Guest suite 02,03
QUANTITY
2
GLASS TYPE
MI 08
Frameless 6 mm Clear Mirror
LOCATION: Ground Floor DOOR DESCRIPTION:
Guest suite 01,03 bathrooms
QUANTITY
2
GLASS TYPE
MI 09
Frameless 6 mm Clear Backlit Mirror
LOCATION: First Floor DOOR DESCRIPTION:
Guest suite 05
QUANTITY
1
GLASS TYPE
MI 10
Frameless 6 mm Clear Mirror
LIGHT
LOCATION: First Floor DOOR DESCRIPTION:
Guest suite 04
QUANTITY
1
Frameless 6 mm Clear Mirror
LIGHT
A
GENERAL NOTES:
DRAWERS
B
GLASS TYPE
MI 11
LOCATION: First Floor DOOR DESCRIPTION:
Guest suite 04
QUANTITY
1
GLASS TYPE
MI 12
Frameless 6 mm Clear Backlit Mirror
LOCATION: First Floor DOOR DESCRIPTION:
Master bedroom 01 QUANTITY
1
GLASS TYPE
MI 13
Frameless 6 mm Clear Backlit Mirror
LOCATION: First Floor DOOR DESCRIPTION: A: 1 pieces - Front Lighted Frameless 6 mm Clear Mirror B: 1 pieces - Frameless 6 mm Clear Mirror
Master bedroom 01 QUANTITY
1
GLASS TYPE
MI 14
LOCATION: First Floor DOOR DESCRIPTION:
Master bedroom 02,03 QUANTITY
2
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
Frameless 6 mm Clear Mirror REVISION: 05 04 03 02 01 NO. DESCRIPTION
DATE
MR. MOHAMED FARUQE OWNER
VILLA 123 PROJECT
DUBAI LOCATION
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
GLASS SCHEDULE
DRAWING TITLE
GLASS TYPE
MI 15
LOCATION: First Floor DOOR DESCRIPTION: Frameless 6 mm Clear Backlit Mirror
Master bedroom 02
QUANTITY
1
GLASS TYPE
MI 16
LOCATION: First Floor DOOR DESCRIPTION: Frameless 6 mm Clear Backlit Mirror
Master bedroom 03
QUANTITY
1
GLASS TYPE
MI 17
LOCATION: Roof Floor DOOR DESCRIPTION:
Bathroom
QUANTITY
1
JULY 2023
ISSUE DATE
Frameless 6 mm Clear Backlit Mirror DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
1:50
Arch. DINA HADDADIN
PROJECT No
SHEET No
IH105
FOR TENDERING
DOWN STAIRS 02
B
SHOW GARAGE
SERVICE DOORS
A
CANOPY
-3.38 F.F.L
PARTITION
HPL 01
LOCATION: Baesment Floor SHOW GARAGE DESCRIPTION: HPL Louvers fixed to the upstand (refer to detail FD12) and ceiling, with louvered door. As per approved sample
QUANTITY
1 +0.45 F.F.L
3D SHOT
+0.40 F.F.L
ELEVATION A
ELEVATION B GENERAL NOTES:
PARTITION
HPL 02
LOCATION: Ground Floor DESCRIPTION: HPL Louvers fixedfixed to the upstand (refer to detail FD12) and ceiling , as per approved sample
MAIN ENTRANCE
QUANTITY
1
PARTITION
HPL 03
LOCATION: Ground Floor COVERING FAMILY BATHROOM AND DIRTY KITCHEN WINDOWS DESCRIPTION: HPL Louvers fixed to the floor and ceiling , as per approved sample
QUANTITY
1
HPL 01 PLAN DETAIL SCALE 1:10
HPL 03&06&07 PLAN DETAIL SCALE 1:10
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations. REVISION: 05 04 03 02 01 NO. DESCRIPTION
DATE
MR. MOHAMED FARUQE OWNER +4.85 F.F.L
+4.85 F.F.L
VILLA 123
HPL 02 PLAN DETAIL SCALE 1:10
3D SHOT
PROJECT
3D SHOT
DUBAI LOCATION
HPL 02 PLAN DETAIL SCALE 1:10
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
PARTITION
HPL 06
LOCATION: First Floor DESCRIPTION: HPL Louvers fixed to the floor and ceiling , as per approved sample
MASTER BEDROOM 01 BALCONY
QUANTITY
4
PARTITION
HPL 07
LOCATION: First Floor DESCRIPTION: HPL Louvers fixed to the floor and ceiling , as per approved sample
MASTER BEDROOM 02 BALCONY
QUANTITY
2
HPL SCHEDULE
DRAWING TITLE
JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
1:50
Arch. DINA HADDADIN
PROJECT No
SHEET No
IH106
FOR TENDERING
HPL 04,05 PLAN DETAIL 01 SCALE 1:10
HPL 08 PLAN DETAIL SCALE 1:10
+4.85 F.F.L
3D SHOT
PARTITION
HPL 04,05 PLAN DETAIL 02 SCALE 1:10
HPL 08
LOCATION: First Floor Refer to annotation plans DESCRIPTION: HPL Louvers Cladding fixed with subframe , as per approved sample
QUANTITY
6
3
3 B B
HPL 09 PLAN DETAIL SCALE 1:10
2
WITH SUBSTRUCUTRE
WITH SUBSTRUCUTRE
1
1 2
PLAN DETAIL 01
A
2
A
PLAN DETAIL 02
+0.45 F.F.L GENERAL NOTES:
PARTITION
HPL 09
LOCATION: Ground Floor Powder room DESCRIPTION: 45 degree Angled HPL Louvers fixed to the floor and ceiling , as per approved sample
3
QUANTITY
1
3
1 1
2
2
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations. REVISION: 05 04 03
+4.85 F.F.L
+4.85 F.F.L 02 01 NO. DESCRIPTION
DATE
MR. MOHAMED FARUQE OWNER
VILLA 123 PROJECT
DUBAI LOCATION
CONCEPT DESIGN PHASE +0.45 F.F.L
SCHEMATIC DESIGN PHASE
+0.45 F.F.L
DESIGN DEVELOPMENT PHASE
ELEVATION A
ELEVATION B
ELEVATION A
ELEVATION B
CONSTRUCTION DRAWINGS PHASE
HPL SCHEDULE
DRAWING TITLE
PARTITION
HPL 04
LOCATION: Ground&First Floor DESCRIPTION: HPL Louvers fixed to the floor and ceiling with metal subframe , as per approved sample
Refer to annotation plans
QUANTITY
1
PARTITION
HPL 05
LOCATION: Ground&First Floor DESCRIPTION: HPL Louvers fixed to the floor and ceiling with metal subframe , as per approved sample
Refer to annotation plans
QUANTITY
1
JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
1:25
Arch. DINA HADDADIN
PROJECT No
SHEET No
IH107
HARDWARE SET. 01
HARDWARE SET. 03
For wooden doors
For wooden doors
Door no.
Space name
WD-02
Sunken garden / Garden bathroom
WD-07
FOR TENDERING
Door no.
Space name
1 (HEAVY DUTY HINGES)
WD-01
Show garage / Driver's room
2
B1 Bathroom 01
1
WD-03
Show garage - Lobby 02 (Service Entrance)
1
WD-09
Powder room
1
WD-11
Banqueting area/ Family bathroom
1
WD-21
ROOF - Lobby / Bathroom
1
QUANTITY
5 Door / 5 Sets
TOTAL QUANTITY
QUANTITY
3 Door / 3 Sets
TOTAL QUANTITY
SET COMPONENTS
SET COMPONENTS
QUANTITY
UNIT
ITEM
ITEM COMPANY
3
pc
Hinges
REAL CRAFT
DESCRIPTION
ILLUSTRATION
Black Concealed hinge for swing door
QUANTITY
UNIT
ITEM
ITEM COMPANY
3
pc
Hinges
REAL CRAFT
or equivalent
1
pc
Cylinder
hanssplus
pc
Cylinder cover
decor and decor
TRADCO PRIVACY BOLT MATT BLACK 60MM 9604 BLACK
1
pc
Cylinder
pc
lever handle
decor and decor
Black Concealed hinge for swing door
hanssplus
TRADCO PRIVACY BOLT MATT BLACK 60MM 9604 BLACK
or equivalent
DESIGNER MATT BLACK FLAT INTERNAL ROSE BLACK
1
pc
Cylinder cover
or equivalent
2
ILLUSTRATION
or equivalent
or equivalent
1
DESCRIPTION
decor and decor
DESIGNER MATT BLACK FLAT INTERNAL ROSE BLACK
or equivalent
2
DESIGNER MATT BLACK FLAT INTERNAL DOOR HANDLES LEVER BLACK
pc
lever handle
decor and decor
DESIGNER MATT BLACK FLAT INTERNAL DOOR HANDLES LEVER BLACK
GENERAL NOTES:
1
pc
Door closer
WELLING
1
BLACK CONCEALED DOOR CLOSER
pc
Door closer
or equivalent
1
pc
Door stop
hardware hut or equivalent
INO-DSIX09-10B 1
WALL MOUNTED DOOR STOP BLACK
pc
For wooden doors
For wooden doors
WD-04 WD-05
Door stop
hardware hut or equivalent
HARDWARE SET. 04
Space name
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations.
BLACK CONCEALED DOOR CLOSER
or equivalent
HARDWARE SET. 02 Door no.
WELLING
INO-DSIX09-10B WALL MOUNTED DOOR STOP BLACK
REVISION: 05
QUANTITY
Door no.
Space name
QUANTITY
Lobby 02 / Stair 01
1
TGD-02
Service door
1
Laundry room
2
04 03 02 01 NO. DESCRIPTION
DATE
MR. MOHAMED FARUQE 3 Doors / 3 Sets
TOTAL QUANTITY
OWNER
1 Doors / 1 Sets
TOTAL QUANTITY SET COMPONENTS
SET COMPONENTS
VILLA 123 PROJECT
QUANTITY
UNIT
ITEM
ITEM COMPANY
DESCRIPTION
ILLUSTRATION
QUANTITY
UNIT
ITEM
ITEM COMPANY
DESCRIPTION
ILLUSTRATION
DUBAI LOCATION
3
pc
Hinges
hanssplus
COLL RECTANGULAR WITH 8 SCREWS IN MATTE BLACK FINISH BLACK
1
pc
Lock
hanssplus
MINDEN SQUARE PRIVACY TURNING SNIB ON SQUARE ROSETTE IN MATTE BLACK FINISH
or equivalent
or equivalent
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
2
pc
lever handle
decor and decor
DESIGNER MATT BLACK FLAT INTERNAL DOOR HANDLES LEVER BLACK
2
pc
lever handle
or equivalent
decor and decor
DESIGNER MATT BLACK FLAT INTERNAL DOOR HANDLES LEVER BLACK
DRAWING TITLE
IRONMONGREY SCHEDULE JULY 2023
ISSUE DATE
or equivalent
DESIGNED BY:
DRAWN BY:
1
pc
Door stop
hardware hut or equivalent
INO-DSIX09-10B
2
pc
Floor spring
Dorma
WALL MOUNTED DOOR STOP BLACK or equivalent
Painted powder coated floor springs for double action door Matte Black
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
-
Arch. DINA HADDADIN
PROJECT No
SHEET No
IH108
FOR TENDERING HARDWARE SET. 05
HARDWARE SET. 07
For wooden doors
For wooden doors
Door no.
Space name
QUANTITY
Door no.
Space name
WD-08
Main Door
1
WD-15
Guest suite 01,03 / Bathrooms
2
WD-18
Guest suite 04,05/ Bathrooms
2
WD-19
Master bedroom 01 / Bathrooms
1
WD-20
Master bedroom 01 / Bathrooms
2 ( EACH DOOR ONE HANDLE ONLY )
TGD-11
Master bedroom 02 / Bathrooms
1
TGD-12
Master bedroom 03 / Bathrooms
1
TGD-13
Master bedroom 02 / Bathrooms
1
TGD-14
Master bedroom 03 / Bathrooms
1
1 Door / 1 Set
TOTAL QUANTITY SET COMPONENTS QUANTITY
UNIT
ITEM
ITEM COMPANY
DESCRIPTION
ILLUSTRATION
QUANTITY
11 Doors / 11 Sets
TOTAL QUANTITY SET COMPONENTS QUANTITY
1
pc
Pivot Hinges
The Lock and Handle or equivalent
UNIT
ITEM
pc
Sliding door gear
ITEM COMPANY
DESCRIPTION
ILLUSTRATION
Pivot Hinge | Adjustable Spring Loaded | 20 to 40kg Matte Black 1
HOWDENS
Marathon Sliding Door Gear PRODUCT CODE: GIR0030
or equivalent 1
pc
Lock
hanssplus or equivalent
2
pc
Pull handle
Keeler hardware
ZADAR SQUARE SQUARE ESCUTCHEON IN BLACK FINISH WITH DOUBLE KEYED DOOR CYLINDER Item No. DLO3001-01-BL
2
pc
Pull handle
Keeler hardware
Painted powder coated pull handle Matte Black
or equivalent
Painted powder coated pull handle Matte Black
or equivalent
HARDWARE SET. 08 For wooden doors
1
pc
Door stop
hardware hut
FLOOR MOUNTED DOOR STOP BLACK FINISH
Door no.
Space name
QUANTITY
WD-06
Maid's room
1
SD-01
Mechanical room
1
SD-02
Pump & Elect. rooms
2
or equivalent
HARDWARE SET. 06 GENERAL NOTES:
For wooden doors Door no. WD-22
Space name
QUANTITY
SET COMPONENTS
1
B1 shisha lounge
4 Doors / 4 Sets
TOTAL QUANTITY
QUANTITY
UNIT
ITEM
ITEM COMPANY
3
pc
Hinges
hanssplus
1 Doors / 1 Sets
TOTAL QUANTITY
UNIT
ITEM
ITEM COMPANY
DESCRIPTION
ILLUSTRATION
1 1
pc
Sliding door gear
HOWDENS
COLL RECTANGULAR WITH 8 SCREWS IN MATTE BLACK FINISH BLACK
or equivalent
SET COMPONENTS QUANTITY
DESCRIPTION
pc
Cylinder
Marathon Sliding Door Gear PRODUCT CODE: GIR0030
hanssplus
TRADCO PRIVACY BOLT MATT BLACK 60MM 9604 BLACK
or equivalent
ILLUSTRATION
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations. REVISION: 05 04 03
or equivalent
02 01
1
pc
Cylinder cover
decor and decor
DESIGNER MATT BLACK FLAT INTERNAL ROSE BLACK
NO. DESCRIPTION
DATE
MR. MOHAMED FARUQE OWNER
or equivalent
VILLA 123 PROJECT
2
pc
lever handle
decor and decor
DESIGNER MATT BLACK FLAT INTERNAL DOOR HANDLES LEVER BLACK
DUBAI LOCATION
or equivalent CONCEPT DESIGN PHASE
1
pc
Door stop
hardware hut or equivalent
INO-DSIX09-10B WALL MOUNTED DOOR STOP BLACK
SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
DRAWING TITLE
IRONMONGREY SCHEDULE JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
-
Arch. DINA HADDADIN
PROJECT No
SHEET No
IH109
FOR TENDERING HARDWARE SET. 09
HARDWARE SET. 10
For wooden doors
For steel doors
Door no.
Space name
QUANTITY
Door no.
Space name
WD-13
Guest suite 02-03 / lobby 04
2
TGD-03
Guest suite 01 bathroom
1
WD-14
Guest suite 01 / lobby 04
1
TGD-04
Guest suite 02 bathroom
1
WD-16
Lobbies / Guest suite 4&5, Master bedroom 2&3
4
TGD-05
Guest suite 02 bathroom
1
WD-17
Lobby / Master bedroom 1
1
TGD-06
Guest suite 03 bathroom
2
TGD-07
Guest suite 05 bathroom
1
TGD-08
Guest suite 04 bathroom
2
TGD-09
Master bedroom 01 bathroom
1
TGD-10
Master bedroom 01 bathroom
1
TGD-01
Roof bathroom
1
8 Door / 8 Sets
TOTAL QUANTITY SET COMPONENTS QUANTITY
UNIT
ITEM
ITEM COMPANY
DESCRIPTION
ILLUSTRATION
QUANTITY
11 Doors / 11 Sets
TOTAL QUANTITY SET COMPONENTS
4
pc
Hinges
REAL CRAFT
QUANTITY
UNIT
ITEM
2
pc
Pull handle
ITEM COMPANY
DESCRIPTION
ILLUSTRATION
Black Concealed hinge for swing door
or equivalent
1
pc
Cylinder
hanssplus
Painted powder coated pull handle Matte Black
or equivalent
TRADCO PRIVACY BOLT MATT BLACK 60MM 9604 BLACK
or equivalent
Keeler hardware
HARDWARE SET. 11 For wooden doors
1
pc
Cylinder cover
decor and decor
DESIGNER MATT BLACK FLAT INTERNAL ROSE BLACK
Door no.
Space name
WD-10
Lobby 01/ banquetting area
1
WD-11
Banqueting area/ Dirty kitchen
1
WD-12
Dirty kitchen/ Stair 01
1
QUANTITY
or equivalent 3 Doors / 3 Set
TOTAL QUANTITY 2
pc
lever handle
decor and decor
DESIGNER MATT BLACK FLAT INTERNAL DOOR HANDLES LEVER BLACK
SET COMPONENTS QUANTITY
UNIT
ITEM
ITEM COMPANY
DESCRIPTION
ILLUSTRATION
GENERAL NOTES:
3
pc
Hinges
REAL CRAFT
Black Concealed hinge for swing door
or equivalent 1
pc
Door stop
hardware hut or equivalent
INO-DSIX09-10B WALL MOUNTED DOOR STOP BLACK
1
pc
lever handle
decor and decor
DESIGNER MATT BLACK FLAT INTERNAL DOOR HANDLES LEVER BLACK
or equivalent
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations. REVISION: 05 04 03 02 01 NO. DESCRIPTION
1
pc
Door closer
WELLING
DATE
MR. MOHAMED FARUQE BLACK CONCEALED DOOR CLOSER
OWNER
VILLA 123 PROJECT
or equivalent
DUBAI LOCATION
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
1
pc
Door stop
hardware hut or equivalent
INO-DSIX09-10B DRAWING TITLE
IRONMONGREY SCHEDULE
WALL MOUNTED DOOR STOP BLACK
JULY 2023
ISSUE DATE
DESIGNED BY:
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
-
Arch. DINA HADDADIN
PROJECT No
SHEET No
IH110
B1-01
LOBBY 01
GF-01
FOYER
B1-02
KITCHEN
GF-02
DINNING AREA
B1-03
BATHROOM 01
GF-03
SHOW KITCHEN
B1-04
CENIMA
GF-04
BANQUETING AREA
B1-05
GAMING OPEN ROOM
GF-05
FAMILY BATHROOM
B1-06
SHISHA LOUNGE
GF-06
DIRTY KITCHEN
B1-07
GARDEN BATHROOM
GF-07
PANTRY
B1-08
DRIVERS ROOM
GF-08
LOBBY 01
B1-09
DRIVERS BATHROOM
GF-09
POWDER ROOM
B1-10
PUMP ROOM
GF-10
LOBBY 02
B1-12
LOBBY 02
GF-11
LIVING ROOM
B1-13
MECHANICAL ROOM
GF-12
LOBBY 03
B1-14
PUMP ROOM
GF-13
LOBBY 04
B1-15
LAUNDRY ROOM
GF-14
GUEST SUITE 01
29
28
23
20
18
16
12
11
09
08
02
01
TL-09
TL-06
TL-05
TL-04
TL-03
TL-02
TL-01
20
16
08
05
03
02
01
TL-08
TL-07
TL-06
TL-05
TL-04
TL-03
TL-02
TL-01
FOR TENDERING
GENERAL NOTES:
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations. REVISION: 05 04 03
B1-16
ELECTRICAL ROOM
GF-15
GUEST SUITE 02
B1-17
LOBBY 03
GF-16
GUEST SUITE 03
B1-18
MAIDS ROOM
GF-17
GUEST SUITE 01 BATHROOM
MAIDS BATHROOM
GF-18
GUEST SUITE 02 BATHROOM
-
STAIR 01
GF-19
GUEST SUITE 03 BATHROOM
-
STAIR 02
-
B1-19
-
SHOW GARAGE
-
02 01 NO. DESCRIPTION
DATE
MR. MOHAMED FARUQE OWNER
VILLA 123 PROJECT
STAIR 01 STAIR 02
DUBAI LOCATION
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
DRAWING TITLE
FINISHES SCHEDULE JULY 2023
ISSUE DATE
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
DESIGNED BY:
Arch. DINA HADDADIN
PROJECT No
SHEET No
IH111
FF-01
LOBBY 01
RF-01
LOBBY 01
FF-02
LOBBY 02
RF-02
BATHROOM
09
08
02
01
TL-04
TL-03
30
28
24
23
22
20
18
12
11
09
08
02A
02
01
TL-09
TL-04
TL-03
TL-01
FOR TENDERING
GENERAL NOTES:
FF-03
LOBBY 03
FF-04
LOBBY 04
FF-05
FAMILY ROOM
FF-06
GUEST SUITE 05
FF-07
GUEST SUITE 05 BATHROOM
FF-08
GUEST SUITE 04
FF-09
GUEST SUITE 04 BATHROOM
FF-10
MASTERBEDROOM 01
FF-11
MASTER DRESSING ROOM 01
FF-12
MASTER BATHROOM 01
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations. REVISION: 05
FF-13
MASTERBEDROOM 02
FF-14
MASTER BATHROOM 02
FF-15
MASTER DRESSING ROOM 02
04 03 02 01 NO. DESCRIPTION
FF-16
MASTERBEDROOM 03
FF-17
MASTER BATHROOM 03
FF-18
MASTER DRESSING ROOM 03
DATE
MR. MOHAMED FARUQE OWNER
VILLA 123 PROJECT
-
STAIR 02 DUBAI LOCATION
CONCEPT DESIGN PHASE SCHEMATIC DESIGN PHASE DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
DRAWING TITLE
FINISHES SCHEDULE JULY 2023
ISSUE DATE
DRAWN BY:
Arch. DALIA RAWABDEH
PAPER SIZE DRAWING SCALE
A1
DESIGNED BY:
Arch. DINA HADDADIN
PROJECT No
SHEET No
IH112
FOR TENDERING FIXTURE
BASIN MIXER
CODE
DESCRIPTION
FR-FI14
FREE STANDING FAUCET AND MIXER BLACK FINISH
SUPPLIER
SAMPLE TO BE PROVIDED FOR CLIENT CONFIRMATION HAND BIDET MIXER HAND HELD BIDET
FR-FI15
TOILET SEAT
FR-FI01
TOILET FLUSH PLATE
FR-FI16
WALL MOUNTED TOILET SEAT
SCARABEO
WALL MOUNTED FLUSH PLATE
FR-AC02
FREE STANDING TRASH BIN
COUNT
1
FIXTURE
CODE
BASIN FAUCET FR-FI23 AND MIXER
newform Art. 885
BLACK FINISH
STAINLESS STEEL FINISH
TRASH BIN
newform N21 Art. 71720
External part. To combine with oncealed part 27852.
BLACK FINISH
IMAGE
WALL MOUNTED PAPER FR-AC01 HOLDER
1
HAND HELD BIDET
FR-FI15
1
Moon Wall-mounted WC 45 Moon CODE: 5524CL
TOILET SEAT
Newform DELTA ZERO
1
TOILET FLUSH PLATE
FR-FI01
FR-FI16
WASH BASIN
FR-FI02
PRESS-BUTTON FR-AC03 DRAIN
ABK-SENSI-UP-MARQUINIA TILES FINISH
PRESS -BUTTON DRAIN BLACK FINISH
FR-AC04 WALL MOUNTED BRUSH
TOILET BRUSH
BLACK FINISH
newform MINI-X Art. 61310 Single-lever basin mixer
SAMPLE TO BE PROVIDED FOR CLIENT CONFIRMATION
BY CONTRACTER
1
TRASH BIN
FR-AC02
BLACK FINISH
WALL MOUNTED TOILET SEAT
SCARABEO
BLACK FINISH
Moon Wall-mounted WC 45 Moon CODE: 5524CL
WALL MOUNTED FLUSH PLATE
Newform DELTA ZERO
FREE STANDING TRASH BIN
IMAGE
COUNT
1
FIXTURE
CODE
BASIN FAUCET FR-FI23 AND MIXER
newform Art. 885 External part. To combine with oncealed part 27852.
STAINLESS STEEL FINISH
Art. 887
1
HAND HELD BIDET
FR-FI15
1 TOILET SEAT
FR-FI01
BY CONTRACTER
1
CUSTOM MADE
TOILET PAPER HOLDER
WALL MOUNTED PAPER FR-AC01 HOLDER
1
TOILET FLUSH PLATE
FR-FI16
REFER TO DRAWING newform BLINK Art. 230 1”1/4 press-button drain
1
BY CONTRACTER
1
WASH BASIN
1
TRASH BIN
FR-AC02
BY CONTRACTER
1
PRESS-BUTTON FR-AC03 DRAIN
TOILET BRUSH
BLACK FINISH
FR-AC04 WALL MOUNTED BRUSH BLACK FINISH
*** SAMPLES TO BE PROVIDED FOR CLIENT CONFIRMATION. TOWEL STORAGE
PRESS -BUTTON DRAIN
WALL MOUNTED FR-AC06 BLACK TOWEL STORAGE
1
FIXTURE
BASIN MIXER
CODE
DESCRIPTION
FR-FI22
FREE STANDING FAUCET AND MIXER BLACK FINISH SAMPLE TO BE PROVIDED FOR CLIENT CONFIRMATION
newform Art. 885 External part. To combine with oncealed part 27852.
WALL MOUNTED TOILET SEAT
SCARABEO
FREE STANDING TRASH BIN
COUNT
newform MINI-X Art. 61310 Single-lever basin mixer
BLACK FINISH
WALL MOUNTED FLUSH PLATE
IMAGE
WALL MOUNTED BIDET 1
FR-FI10
BIDET MIXER
Moon Wall-mounted WC 45 Moon CODE: 5524CL Newform DELTA ZERO
HAND HELD BIDET
1 FR-FI20
TOILET PAPER HOLDER
WALL MOUNTED PAPER FR-AC01 HOLDER
1
WASH BASIN
1
FR-FI01
TOILET SEAT
CODE: 8111 newform BLINK Art. 230 1”1/4 press-button drain
1
PRESS-BUTTON FR-AC03 DRAIN
PRESS -BUTTON DRAIN BLACK FINISH
BY CONTRACTER
1
TOILET FLUSH PLATE
FR-FI16
BY CONTRACTER
1
FR-AC02
TRASH BIN
BY CONTRACTER
TOILET BRUSH
1
HEAD SHOWER
FR-AC04 WALL MOUNTED BRUSH BLACK FINISH
FR-FI06
WALL MOUNTED HEAD SHOWER BLACK FINISH
WALL MOUNTED
HAND SHOWER
FR-FI18
SHOWER MIXER
FR-FI19
B1 BATHROOM&G.F POWDER ROOM SCHEDULE
FIXTURE
BASIN MIXER
CODE
DESCRIPTION
FR-FI14
FREE STANDING FAUCET AND MIXER BLACK FINISH SAMPLE TO BE PROVIDED FOR CLIENT CONFIRMATION HAND BIDET MIXER
HAND HELD BIDET
TOILET SEAT
TOILET FLUSH PLATE
FR-FI15
FR-FI01
FR-FI16
BLACK FINISH
WALL MOUNTED TOILET SEAT
SUPPLIER newform N21 Art. 71720
IMAGE
COUNT
1 CODE: 8111 newform BLINK Art. 230 1”1/4 press-button drain
1
BY CONTRACTER
SCARABEO
BLACK FINISH
Moon Wall-mounted WC 45 Moon CODE: 5524CL
WALL MOUNTED FLUSH PLATE
Newform DELTA ZERO
STAINLESS STEEL FINISH
Art. 887
TOWEL STORAGE
FR-AC06
WALL-MOUNTED BIDET MOON CODE: 5521
newform BLINK Art. 70825
WALL MOUNTED
newform Art. 67688E
BY CONTRACTER
FR-FI14
1
HAND HELD BIDET
TOILET SEAT
FR-FI15
FR-FI01
SCARABEO
FREE STANDING TRASH BIN
1 TOILET FLUSH PLATE
Moon Wall-mounted WC 45 Moon CODE: 5524CL
1
1
BATHTUB MIXER
FR-FI11
BLACK FINISH
FR-FI12
FR-FI21
1
1
TOILET BRUSH
HEAD SHOWER
FREE STANDING BATHTUB FAUCET / MIXER BLACK FINISH
PRESS-BUTTON FR-AC03 DRAIN
1
FR-FI16
FR-AC02
TRASH BIN
BY CONTRACTER
PRESS -BUTTON DRAIN BLACK FINISH
FR-AC04 WALL MOUNTED BRUSH BLACK FINISH
FR-FI06
WALL MOUNTED HEAD SHOWER BLACK FINISH
newform N21 Art. 71720
BLACK FINISH
WALL MOUNTED TOILET SEAT
SCARABEO
BLACK FINISH
Moon Wall-mounted WC 45 Moon CODE: 5524CL
WALL MOUNTED FLUSH PLATE
Newform DELTA ZERO
STAINLESS STEEL FINISH
Art. 887
FREE STANDING TRASH BIN
IMAGE
COUNT
1
newform Art. 885 External part. To combine with oncealed part 27852.
1
WALL MOUNTED PAPER FR-AC01 HOLDER
TOILET PAPER HOLDER
1
WALL MOUNTED BLACK TOWEL STORAGE
BY CONTRACTER
1
HAND SHOWER
WALL MOUNTED
BY CONTRACTER
1
CUSTOM MADE
WASH BASIN
FR-FI07
2
PRESS-BUTTON FR-AC03 DRAIN
ABK-SENSI-UP-MARQUINIA TILES FINISH
PRESS -BUTTON DRAIN BLACK FINISH
..\..\..\kour&kour\k06.GN Villas 123-124.UAE21 - General\00 Villa 123\08.06k.123. Interior Design\02- Construction Package\IMAGES 2D\TOILET FIXTURES\bathtub.jpg
AQUATICA COLETTA BLACK FREESTANDING BATHTUB ALPINE FIONA FREESTANDING BATH MIXER SKU: 100207-1BK newform BLINK Art. 230 1”1/4 press-button drain BY CONTRACTER
1
1
BY CONTRACTER
1
BY CONTRACTER
1
1
1
TOILET BRUSH
HEAD SHOWER
FR-AC04 WALL MOUNTED BRUSH BLACK FINISH
FR-FI06
WALL MOUNTED HEAD SHOWER BLACK FINISH
1
HAND SHOWER
FR-FI18
1
SHOWER MIXER
FR-FI19
CUSTOM MADE REFER TO DRAWING newform BLINK Art. 230 1”1/4 press-button drain
1
1
BY CONTRACTER
newform Art. 26534 OR EQUIVALENT
WALL MOUNTED
newform
BLACK HAND SHOWER
CODE: Art. 823
WALL MOUNTED
newform Art. 67688E
1
1
1
BLACK SHOWER MIXER GENERAL NOTES:
newform Art. 26534 OR EQUIVALENT
1
TOWEL HOOK
FR-AC05
1
TOWEL STORAGE
FR-AC06
newform
FR-FI18
WALL MOUNTED TOWEL HOOK BLACK FINISH
BY CONTRACTER
1
BLACK HAND SHOWER
CODE: Art. 823
WALL MOUNTED
newform Art. 67688E
WALL MOUNTED
BY CONTRACTER
BLACK TOWEL STORAGE
1
*** SAMPLES TO BE PROVIDED FOR CLIENT CONFIRMATION.
*** SAMPLES TO BE PROVIDED FOR CLIENT CONFIRMATION. SHOWER MIXER
FR-FI19
NOTE: SAMPLE TO BE PROVIDED FOR CLIENT CONFIRMATION
1
BLACK FINISH
FREE STANDING WASH BASIN
REFER TO DRAWING
SUPPLIER
BLACK FINISH
BLACK FINISH
WASH BASIN
BATHTUB
newform CODE: Art. 823
BASIN MIXER
DESCRIPTION FREE STANDING FAUCET AND MIXER BLACK FINISH SAMPLE TO BE PROVIDED FOR CLIENT CONFIRMATION
1
Art. 887
WALL MOUNTED PAPER FR-AC01 HOLDER
TOILET PAPER HOLDER
newform Art. 26534 OR EQUIVALENT
CODE
HAND BIDET MIXER
STAINLESS STEEL FINISH
BLACK FINISH
BLACK HAND SHOWER
WALL MOUNTED TOWEL HOOK BLACK FINISH
2
FIXTURE
1
newform Art. 885 External part. To combine with oncealed part 27852.
FR-AC05
COUNT
SCARABEO
Newform DELTA ZERO
FREE STANDING WASH BASIN
BLACK SHOWER MIXER
TOWEL HOOK
newform BLINK CHIC Art. 71002
WALL MOUNTED FLUSH PLATE
FREE STANDING BATHTUB BY CONTRACTER
IMAGE
BLACK FINISH
*** SAMPLES TO BE PROVIDED FOR CLIENT CONFIRMATION.
1
WALL MOUNTED TOILET SEAT
Art. 887
SCARABEO BLACK OVAL WASH BASIN
SINGLE LEVER BIDET MIXER BLACK FINISH
BLACK FINISH
BLACK FINISH
FR-FI09
BLACK FINISH
SUPPLIER
SAMPLE TO BE PROVIDED FOR CLIENT CONFIRMATION
FREE STANDING
SCARABEO BLACK OVAL WASH BASIN
SUPPLIER
BLACK FINISH
BLACK FINISH
FR-FI09
SAMPLE TO BE PROVIDED FOR CLIENT CONFIRMATION
STAINLESS STEEL FINISH
FREE STANDING
1
FREE STANDING FAUCET WITH MIXER BLACK FINISH
BLACK FINISH
Art. 887
BY CONTRACTER
DESCRIPTION
HAND BIDET MIXER
BLACK FINISH
BLACK FINISH
FREE STANDING WASH BASIN
SUPPLIER
HAND BIDET MIXER
BLACK FINISH
TOILET PAPER HOLDER
DESCRIPTION FREE STANDING FAUCET WITH MIXER BLACK FINISH
1
BLACK SHOWER MIXER
1 *** SAMPLES TO BE PROVIDED FOR CLIENT CONFIRMATION.
1
1. Do not scale from this drawing 2. All setting out and check dimensions are to be verified by the contractor on site. Upon receipt of this drawing, any discrepancies are to be reported to the Architect/Supervising Officer immediately. 3. The positions of all existing services are to be verified by the contractor on site. 4. Where applicable, all dimensions of existing buildings are to be verified on site. Structural grid dimensions, where indicated, are nominal. Where applicable, the actual position of installed structure on site may deviate from the nominal grid. 5. This drawing is to be read in conjunction with the appropriate Architects and Consultants drawings and specification. 6. All works to be carried out in accordance with current Health and Safety Regulations. REVISION:
FR-AC02
TRASH BIN
FREE STANDING TRASH BIN
BY CONTRACTER
05
1
04
BLACK FINISH 03
WALL MOUNTED PAPER FR-AC01 HOLDER
TOILET PAPER HOLDER
02
BY CONTRACTER
1
01
BLACK FINISH
WALL MOUNTED WASH BASIN WASH BASIN
FR-FI02
PRESS-BUTTON FR-AC03 DRAIN
ABK-SENSI-UP-MARQUINIA TILES FINISH
PRESS -BUTTON DRAIN BLACK FINISH
NO. DESCRIPTION
CUSTOM MADE REFER TO DRAWING newform BLINK Art. 230 1”1/4 press-button drain
DATE
MR. MOHAMED FARUQE 1
OWNER
VILLA 123 PROJECT
1
DUBAI LOCATION
TOILET BRUSH
HEAD SHOWER
FR-AC04 WALL MOUNTED BRUSH BLACK FINISH
FR-FI06
WALL MOUNTED HEAD SHOWER BLACK FINISH
BY CONTRACTER
CONCEPT DESIGN PHASE
newform Art. 26534 OR EQUIVALENT
SCHEMATIC DESIGN PHASE 1
DESIGN DEVELOPMENT PHASE CONSTRUCTION DRAWINGS PHASE
HAND SHOWER
WALL MOUNTED
newform
BLACK HAND SHOWER
CODE: Art. 823
FR-FI18
1 DRAWING TITLE
WALL MOUNTED
SHOWER MIXER
FR-FI19
TOWEL HOOK
FR-AC05
newform Art. 67688E
1
BY CONTRACTER
1
JULY 2023
ISSUE DATE
BLACK SHOWER MIXER
WALL MOUNTED TOWEL HOOK BLACK FINISH
FIXTURES SCHEDULE
DRAWN BY:
Arch. DALIA RAWABDEH
DESIGNED BY:
Arch. DINA HADDADIN
*** SAMPLES TO BE PROVIDED FOR CLIENT CONFIRMATION. PAPER SIZE DRAWING SCALE
2
B1 GARDEN BATHROOM SCHEDULE
3
G.F FAMILY BATHROOM SCHEDULE
4
G.F&F.F GUEST SUITS 01,02,03,04,05 BATHROOMS SCHEDULE
5
F.F MASTER BEDROOMS 01,02,03 BATHROOMS SCHEDULE
6
ROOF BATHROOM SCHEDULE
A1
PROJECT No
SHEET No
IH113
VILLA 123 - DUBAI
BOOK OF SPECIFICATIONS (LIGHTING,TILING AND FINISHES)
LIGHTING BOOK OF SPECIFICATIONS
Owner
MR.MOHAMED FARUQE
Project
VILLA 123
Location DUBAI
ITEM
CODE HIDDEN LIGHT
AREA
LI01
FINISH -
ALL FLOORS
QUANTITY
255M
SPECIFICATIONS DIMENSION
IP404/405/406/407
LED Strip, Indirect Light, 9.6W/m, 3000K, 24V, IP20, L1000xW8mm.
MANUFACTURER
REMARKS
DRAWING REF.
SUPPLIER
SAMPLE TO BE PROVIDED FOR CLIENT
LUMICO TRADING&LIGHTING AMMAN-11953 -JORDAN PHONE:009627 9939 6525
CONFIRMATION
Owner
MR.MOHAMED FARUQE
Project
VILLA 123
Location DUBAI
ITEM
CODE HIDDEN LIGHT-PROFILE
AREA
LI01
FINISH ALL FLOORS
QUANTITY
255M
SPECIFICATIONS DIMENSION
DRAWING REF.
IP404/405/406/407
Recessed Aluminium Profile With Opal Diffuser, L3000xW17xH15mm.
MANUFACTURER
REMARKS
-
SUPPLIER
SAMPLE TO BE PROVIDED FOR CLIENT
LUMICO TRADING&LIGHTING AMMAN-11953 -JORDAN PHONE:009627 9939 6525
CONFIRMATION
Owner
MR.MOHAMED FARUQE
Project
VILLA 123
Location DUBAI
ITEM
CODE HIDDEN LIGHT-DRIVER
AREA
LI01
FINISH ALL FLOORS
QUANTITY
DRAWING REF.
SPECIFICATIONS DIMENSION
IP404/405/406/407
Driver, Input: 220-240V, Output: 24V, 150W, IP20.
MANUFACTURER
REMARKS
-
SUPPLIER
SAMPLE TO BE PROVIDED FOR CLIENT
LUMICO TRADING&LIGHTING AMMAN-11953 -JORDAN PHONE:009627 9939 6525
CONFIRMATION
Owner
MR.MOHAMED FARUQE
Project
VILLA 123
Location DUBAI
ITEM
CODE SPOT LIGHT
AREA
LI02
FINISH ALL FLOORS
QUANTITY
246
SPECIFICATIONS DIMENSION
DRAWING REF.
IP404/405/406/407
Ceiling Recessed, Trimless Spotlight, GU10 Base, LED, 7W, 3000K, 120-240V, IP20 D60xH140mm.
MANUFACTURER
REMARKS
BLACK
SUPPLIER
SAMPLE TO BE PROVIDED FOR CLIENT
LUMICO TRADING&LIGHTING AMMAN-11953 -JORDAN PHONE:009627 9939 6525
CONFIRMATION
Owner
MR.MOHAMED FARUQE
Project
VILLA 123
Location DUBAI
ITEM
CODE SPOT LIGHT
AREA
LI03
FINISH BAESMENT & GROUND FLOOR
QUANTITY
43
SPECIFICATIONS DIMENSION
DRAWING REF.
IP404/405
Ceiling Recessed,Downlight, Die-Cast Body,40W,3400lm, 3000K, 220-240V, IP40 D420xH20mm.
MANUFACTURER
REMARKS
-
SUPPLIER
SAMPLE TO BE PROVIDED FOR CLIENT
LUMICO TRADING&LIGHTING AMMAN-11953 -JORDAN PHONE:009627 9939 6525
CONFIRMATION
Owner
MR.MOHAMED FARUQE
Project
VILLA 123
Location DUBAI
ITEM
CEILING MOUNTED CIRCLE LINEAR LIGHT
AREA
CODE LI04
FINISH BAESMENT-SHOW GARAGE
QUANTITY
5
SPECIFICATIONS DIMENSION
DRAWING REF.
RADIUS 70CM
MANUFACTURER BY CONTRACTER
REMARKS
BLACK
SAMPLE TO BE PROVIDED FOR CLIENT
SUPPLIER
CONFIRMATION
IP404
Owner
MR.MOHAMED FARUQE
Project
VILLA 123
Location DUBAI
ITEM
CODE PENDANT LIGHT
AREA
LI05
FINISH BAESMENT KITCHENETTE
QUANTITY
3
SPECIFICATIONS DIMENSION
DRAWING REF.
RADIUS 20CM
MANUFACTURER BY CONTRACTER
REMARKS
WHITE
SAMPLE TO BE PROVIDED FOR CLIENT
SUPPLIER
CONFIRMATION
IP404
Owner
MR.MOHAMED FARUQE
Project
VILLA 123
Location DUBAI
ITEM
CODE DIRECTIONAL SPOT LIGHT
AREA
LI06
FINISH BAESMENT&GROUND FLOOR
QUANTITY
17
SPECIFICATIONS DIMENSION
DRAWING REF.
IP404/IP405
Ceiling Surface, Directional Downlight D80xH105mm.
MANUFACTURER
REMARKS
BLACK
SUPPLIER
SAMPLE TO BE PROVIDED FOR CLIENT
LUMICO TRADING&LIGHTING AMMAN-11953 -JORDAN PHONE:009627 9939 6525
CONFIRMATION
Owner
MR.MOHAMED FARUQE
Project
VILLA 123
Location DUBAI
ITEM
CODE TRACK LIGHT
AREA
LI07
FINISH ALL FLOORS
QUANTITY
180M
SPECIFICATIONS DIMENSION MANUFACTURER
REMARKS
BLACK
DRAWING REF.
IP404/405/406/407
Magnetic Track Rail Profile, Aluminium Body,48V,IP20,End Caps, Connector. L1000xW40xH50mm SUPPLIER
LUMICO TRADING&LIGHTING AMMAN-11953 -JORDAN PHONE:009627 9939 6525
REFER TO 3D SHOTS&PLANS FOR THE DESIGN SAMPLE TO BE PROVIDED FOR CLIENT CONFIRMATION
Owner
MR.MOHAMED FARUQE
Project
VILLA 123
Location DUBAI
ITEM
CODE TRACK LIGHT-PROJECTER
AREA
LI07
FINISH ALL FLOORS
QUANTITY
52
SPECIFICATIONS DIMENSION MANUFACTURER
REMARKS
BLACK
DRAWING REF.
IP404/405/406/407
Magnetic Track Mounted,Projector,Aluminium Body, 10W,950lm,3000K,48V D60xH140mm. IP20 SUPPLIER
LUMICO TRADING&LIGHTING AMMAN-11953 -JORDAN PHONE:009627 9939 6525
REFER TO 3D SHOTS&PLANS FOR THE DESIGN SAMPLE TO BE PROVIDED FOR CLIENT CONFIRMATION
Owner
MR.MOHAMED FARUQE
Project
VILLA 123
Location DUBAI
ITEM
TRACK LIGHT-DIRECTIONAL PROJECTER
AREA
CODE LI07
FINISH ALL FLOORS
QUANTITY
123
SPECIFICATIONS DIMENSION MANUFACTURER
REMARKS
BLACK
DRAWING REF.
IP404/405/406/407
Magnetic Track Mounted,Projector,Aluminium Body, 10W,950lm,3000K,48V D60xH140mm. IP20 SUPPLIER
LUMICO TRADING&LIGHTING AMMAN-11953 -JORDAN PHONE:009627 9939 6525
REFER TO 3D SHOTS&PLANS FOR THE DESIGN SAMPLE TO BE PROVIDED FOR CLIENT CONFIRMATION
Owner
MR.MOHAMED FARUQE
Project
VILLA 123
Location DUBAI
ITEM
CODE TRACK LIGHT-LED LINEAR
AREA
LI07
FINISH ALL FLOORS
QUANTITY
98
SPECIFICATIONS DIMENSION MANUFACTURER
REMARKS
BLACK
DRAWING REF.
IP404/405/406/407
Magnetic Track Mounted, LED Linear, Aluminium Body,12W, 960lm, 3000K, 48V IP20, L200xH37mm. SUPPLIER
LUMICO TRADING&LIGHTING AMMAN-11953 -JORDAN PHONE:009627 9939 6525
REFER TO 3D SHOTS&PLANS FOR THE DESIGN SAMPLE TO BE PROVIDED FOR CLIENT CONFIRMATION
Owner
MR.MOHAMED FARUQE
Project
VILLA 123
Location DUBAI
ITEM
CODE TRACK LIGHT-DRIVER
AREA
LI07
FINISH ALL FLOORS
QUANTITY
DRAWING REF.
SPECIFICATIONS DIMENSION
IP404/405/406/407
Driver 220-240V, 48V, 120W.
MANUFACTURER
REMARKS
BLACK
SUPPLIER
REFER TO 3D SHOTS FOR THE DESIGN SAMPLE TO BE PROVIDED FOR CLIENT
LUMICO TRADING&LIGHTING AMMAN-11953 -JORDAN PHONE:009627 9939 6525
CONFIRMATION
Owner
MR.MOHAMED FARUQE
Project
VILLA 123
Location DUBAI
ITEM
CODE LINEAR LIGHT
AREA
LI08
FINISH GROUND FLOOR-LIVING ROOM
QUANTITY
1
SPECIFICATIONS DIMENSION
DRAWING REF.
IP405
Ceiling Mounted, LED Linear, Aluminium Body, Black Finish, 12W/m, 3000K, 220240V, IP20, L5700xW35xH15mm. Included All Accessories.
MANUFACTURER
REMARKS
BLACK
SUPPLIER
SAMPLE TO BE PROVIDED FOR CLIENT
LUMICO TRADING&LIGHTING AMMAN-11953 -JORDAN PHONE:009627 9939 6525
CONFIRMATION
Owner
MR.MOHAMED FARUQE
Project
VILLA 123
Location DUBAI
ITEM
CODE PENDANT LIGHT
AREA
BASEMENT BATHROOMS & G.F FAMILY BATHROOM
QUANTITY
SPECIFICATIONS DIMENSION
4
FINISH GOLD
DRAWING REF.
DIAMETER 3 CM
MANUFACTURER BY CONTRACTER
REMARKS
LI09
SUPPLIER
IP404
Owner
MR.MOHAMED FARUQE
Project
VILLA 123
Location DUBAI
ITEM
CODE PENDANT LIGHT
AREA
LI10
FINISH G.F POWDER ROOM
QUANTITY
SPECIFICATIONS DIMENSION
1
DRAWING REF.
CEILING MOUNTED
MANUFACTURER BY CONTRACTER
REMARKS
GOLD
SUPPLIER
IP405
Owner
MR.MOHAMED FARUQE
Project
VILLA 123
Location DUBAI
ITEM
CODE PENDANT LIGHT
AREA
LI11
FINISH G.F GUEST SUITS BATHROOMS
QUANTITY
5
SPECIFICATIONS DIMENSION
DRAWING REF.
DIAMETER 30 CM
MANUFACTURER BY CONTRACTER
REMARKS
GOLD
SAMPLE TO BE PROVIDED FOR CLIENT
SUPPLIER
CONFIRMATION
IP405/IP406
Owner
MR.MOHAMED FARUQE
Project
VILLA 123
Location DUBAI
ITEM
WALL MOUNTED DIRECTIONAL LIGHT
AREA
CODE LI12
FINISH G.F&F.F GUEST SUITES
QUANTITY
8
BLACK
DRAWING REF.
SPECIFICATIONS DIMENSION MANUFACTURER BY CONTRACTER
REMARKS
SAMPLE TO BE PROVIDED FOR CLIENT
SUPPLIER
CONFIRMATION
IP405/IP406
Owner
MR.MOHAMED FARUQE
Project
VILLA 123
Location DUBAI
ITEM
CODE PENDANT LIGHT
AREA
LI13,LI19
FINISH GUEST SUITES 1,2,3,4,5
QUANTITY
5
GOLD & WHITE
DRAWING REF.
SPECIFICATIONS DIMENSION MANUFACTURER BY CONTRACTER
REMARKS
SAMPLE TO BE PROVIDED FOR CLIENT
SUPPLIER
CONFIRMATION
IP405
Owner
MR.MOHAMED FARUQE
Project
VILLA 123
Location DUBAI
ITEM
CODE CHANDELIER
AREA
LI14
FINISH DINING ROOM
QUANTITY
1
GOLD
DRAWING REF.
SPECIFICATIONS DIMENSION MANUFACTURER BY CONTRACTER
REMARKS
SAMPLE TO BE PROVIDED FOR CLIENT
SUPPLIER
CONFIRMATION
IP406
Owner
MR.MOHAMED FARUQE
Project
VILLA 123
Location DUBAI
ITEM
CODE FLOOR LAMP
AREA
LI15
FINISH F.F FAMILY ROOM
QUANTITY
1
SPECIFICATIONS DIMENSION
DRAWING REF.
HEIGHT 1.50 M
MANUFACTURER BY CONTRACTER
REMARKS
GOLD
SAMPLE TO BE PROVIDED FOR CLIENT
SUPPLIER
CONFIRMATION
IP406
Owner
MR.MOHAMED FARUQE
Project
VILLA 123
Location DUBAI
ITEM
CODE SCONSE
AREA
LI16
FINISH F.F FAMILY ROOM
QUANTITY
2
SPECIFICATIONS DIMENSION
DRAWING REF.
RADIUS 15CM
MANUFACTURER BY CONTRACTER
REMARKS
BLACK
SAMPLE TO BE PROVIDED FOR CLIENT
SUPPLIER
CONFIRMATION
IP406
Owner
MR.MOHAMED FARUQE
Project
VILLA 123
Location DUBAI
ITEM
CODE PENDANT LIGHT
AREA
LI17
FINISH F.F MASTER BEDROOM 01
QUANTITY
1
SPECIFICATIONS DIMENSION
DRAWING REF.
DIAMETER 25CM
MANUFACTURER BY CONTRACTER
REMARKS
BLACK
SAMPLE TO BE PROVIDED FOR CLIENT
SUPPLIER
CONFIRMATION
IP406
Owner
MR.MOHAMED FARUQE
Project
VILLA 123
Location DUBAI
ITEM
CODE SCONCE
AREA
LI18
FINISH F.F MASTER BEDROOM 01
QUANTITY
2
SPECIFICATIONS DIMENSION
DRAWING REF.
DIAMETER 12CM
MANUFACTURER BY CONTRACTER
REMARKS
BLACK
SAMPLE TO BE PROVIDED FOR CLIENT
SUPPLIER
CONFIRMATION
IP406
Owner
MR.MOHAMED FARUQE
Project
VILLA 123
Location DUBAI
ITEM
CODE FLOOR LAMP
AREA
LI20
FINISH F.F MASTER BEDROOMS 2,3
QUANTITY
2
BLACK
DRAWING REF.
SPECIFICATIONS DIMENSION MANUFACTURER BY CONTRACTER
REMARKS
SAMPLE TO BE PROVIDED FOR CLIENT
SUPPLIER
CONFIRMATION
IP406
Owner
MR.MOHAMED FARUQE
Project
VILLA 123
Location DUBAI
ITEM
CODE PENDANT LIGHT
AREA
LI21
FINISH F.F FAMILY ROOM
QUANTITY
1
SPECIFICATIONS DIMENSION
DRAWING REF.
DOUBLE VOLUME AREA
MANUFACTURER BY CONTRACTER
REMARKS
BLACK
SAMPLE TO BE PROVIDED FOR CLIENT
SUPPLIER
CONFIRMATION
IP406
Owner
MR.MOHAMED FARUQE
Project
VILLA 123
Location DUBAI
ITEM
CODE SCONCE
AREA
F.F MASTER BEDROOM 2,3 BATHROOMS
QUANTITY
3
LI22
FINISH WHITE
DRAWING REF.
SPECIFICATIONS DIMENSION MANUFACTURER BY CONTRACTER
REMARKS
SAMPLE TO BE PROVIDED FOR CLIENT
SUPPLIER
CONFIRMATION
IP406
Owner
MR.MOHAMED FARUQE
Project
VILLA 123
Location DUBAI
ITEM
CODE UPLIGHT
AREA
UL
FINISH BAESMENT,GROUND FLOOR
QUANTITY
22
SPECIFICATIONS DIMENSION
DRAWING REF.
IP500,IP501
Floor recessed, Uplighter, LED, 13W, 959lm, 300K, IP67, CR190 D140xH100mm / angle 15º-30º
MANUFACTURER
REMARKS
Stainless Steel Body, Steel Finish
SUPPLIER
SAMPLE TO BE PROVIDED FOR CLIENT
LUMICO TRADING&LIGHTING AMMAN-11953 -JORDAN PHONE:009627 9939 6525
CONFIRMATION
Owner
MR.MOHAMED FARUQE
Project
VILLA 123
Location DUBAI
ITEM
CODE DECORATIVE LIGHT
AREA
BAESMENT,GROUND FLOOR,FIRST FLOOR & ROOF
QUANTITY
161M
SPECIFICATIONS DIMENSION MANUFACTURER
REMARKS
-
FINISH -
DRAWING REF.
IP404/405/406/407
LED Strip, Decorative Light, 4.8W/m, 3000K, 24V, IP20 L1000xW8mm. SUPPLIER
LUMICO TRADING&LIGHTING AMMAN-11953 -JORDAN PHONE:009627 9939 6525
FOR BAESMENT HAND RAIL,SKIRTING LIGHT,DRESSING WORDROBES,BED HEAD BOARD,DESKS,TV UNIT & SHELVES.
Owner
MR.MOHAMED FARUQE
Project
VILLA 123
Location DUBAI
ITEM
CODE DECORATIVE LIGHT-PROFILE
AREA
BAESMENT,GROUND FLOOR,FIRST FLOOR & ROOF
QUANTITY
REMARKS
FINISH -
DRAWING REF.
SPECIFICATIONS DIMENSION MANUFACTURER
-
IP404/405/406/407
Recessed Aluminium Profile With Opal Diffuser L3000xW17xH15mm. SUPPLIER
LUMICO TRADING&LIGHTING AMMAN-11953 -JORDAN PHONE:009627 9939 6525
FOR BAESMENT HAND RAIL,SKIRTING LIGHT,DRESSING WORDROBES,BED HEAD BOARD,DESKS,TV UNIT & SHELVES.
Owner
MR.MOHAMED FARUQE
Project
VILLA 123
Location DUBAI
ITEM
CODE DECORATIVE LIGHT
AREA
BAESMENT,GROUND FLOOR,FIRST FLOOR & ROOF
QUANTITY
REMARKS
FINISH -
DRAWING REF.
SPECIFICATIONS DIMENSION MANUFACTURER
-
IP404/405/406/407
Driver, Input: 220-240V, Output: 24V, 150W, IP20.
SUPPLIER
LUMICO TRADING&LIGHTING AMMAN-11953 -JORDAN PHONE:009627 9939 6525
FOR BAESMENT HAND RAIL,SKIRTING LIGHT,DRESSING WORDROBES,BED HEAD BOARD,DESKS,TV UNIT & SHELVES.
TILES BOOK OF SPECIFICATIONS
Owner
MR.MOHAMED FARUQE
Project
VILLA 123
Location DUBAI
ITEM
CODE FLOOR TILE
AREA
BASEMENT,GROUND & FIRST FLOOR
QUANTITY
REFER TO BOQ
SPECIFICATIONS DIMENSION
FINISH NAT
DRAWING REF.
IP500/501/502
OAK VANILLA 20*120cm
MANUFACTURER LEA CERAMICHE BIOSELECT
REMARKS
TL-01
SAMPLE TO BE PROVIDED FOR CLIENT
SUPPLIER
https://www.leaceramiche.com /collection/bio-select#color4037
CONFIRMATION
Owner
MR.MOHAMED FARUQE
Project
VILLA 123
Location DUBAI
ITEM
CODE FLOOR TILE
AREA
TL-02
FINISH BASEMENT FLOOR
QUANTITY
REFER TO BOQ
SPECIFICATIONS DIMENSION
DRAWING REF.
IP500
PORCELAIN TILE - MASTER WHITE 120*120CM
MANUFACTURER LEA CERAMICHE MASTERPIECE MASTER WHITE
REMARKS
NAT
SAMPLE TO BE PROVIDED FOR CLIENT
SUPPLIER
https://www.leaceramiche.com /collection/masterpiece#color4936
CONFIRMATION
Owner
MR.MOHAMED FARUQE
Project
VILLA 123
Location DUBAI
ITEM
CODE FLOOR TILE
AREA
TL-03
FINISH GROUND,FIRST & ROOF FLOOR
QUANTITY
REFER TO BOQ
SPECIFICATIONS DIMENSION
DRAWING REF.
IP501/502/503
CALACATA ORO 120*120CM
MANUFACTURER LEA CERAMICHEDELIGHT
REMARKS
POLISHED
SLIMTECH
SAMPLE TO BE PROVIDED FOR CLIENT
SUPPLIER
https://www.leaceramiche.com /collection/delight#color-4052
CONFIRMATION
Owner
MR.MOHAMED FARUQE
Project
VILLA 123
Location DUBAI
ITEM
CODE FLOOR TILE
AREA
BASEMENT,GROUND & ROOF FLOOR
QUANTITY
REFER TO BOQ
SPECIFICATIONS DIMENSION
FINISH NAT
DRAWING REF.
IP500/501/503
DORICA AVORIO 120*280CM , 120*120CM
MANUFACTURER DESVRES ARIANA
REMARKS
TL-04
SAMPLE TO BE PROVIDED FOR CLIENT
SUPPLIER
https://www.desvresariana.co m/en/collection/Dorica
CONFIRMATION
Owner
MR.MOHAMED FARUQE
Project
VILLA 123
Location DUBAI
ITEM
CODE FLOOR TILE
AREA
TL-05
FINISH BASEMENT & GROUND FLOOR
QUANTITY
REFER TO BOQ
SPECIFICATIONS DIMENSION
DRAWING REF.
PORCELAIN TILE 60*60CM
MANUFACTURER BY CONTRACTER
REMARKS
-
SAMPLE TO BE PROVIDED FOR CLIENT
SUPPLIER
CONFIRMATION
IP500/501
Owner
MR.MOHAMED FARUQE
Project
VILLA 123
Location DUBAI
ITEM
CODE FLOOR TILE
AREA
TL-06
FINISH STAIR 01
QUANTITY
REFER TO BOQ
SPECIFICATIONS DIMENSION
DRAWING REF.
TILES TO MATCH (TL-05) 30*120CM
MANUFACTURER BY CONTRACTER
REMARKS
-
SAMPLE TO BE PROVIDED FOR CLIENT
SUPPLIER
CONFIRMATION
IP500/501
Owner
MR.MOHAMED FARUQE
Project
VILLA 123
Location DUBAI
ITEM
CODE FLOOR TILE
AREA
TL-07
FINISH BAESMENT FLOOR
QUANTITY
REFER TO BOQ
SPECIFICATIONS DIMENSION
DRAWING REF.
PEBBLES
MANUFACTURER BY CONTRACTER
REMARKS
-
SAMPLE TO BE PROVIDED FOR CLIENT
SUPPLIER
CONFIRMATION
IP500
Owner
MR.MOHAMED FARUQE
Project
VILLA 123
Location DUBAI
ITEM
CODE FLOOR TILE
AREA
TL-08
FINISH BAESMENT FLOOR- GARAGE
QUANTITY
REFER TO BOQ
SPECIFICATIONS DIMENSION
DRAWING REF.
SCREED WITH EPOXY FINISH
MANUFACTURER BY CONTRACTER
REMARKS
-
SAMPLE TO BE PROVIDED FOR CLIENT
SUPPLIER
CONFIRMATION
IP500
Owner
MR.MOHAMED FARUQE
Project
VILLA 123
Location DUBAI
ITEM
CODE FLOOR TILE
AREA
TL-09
FINISH GROUND & FIRST FLOOR
QUANTITY
REFER TO BOQ
SPECIFICATIONS DIMENSION
DRAWING REF.
IP501/502
DORICA GREIGE 120*120 CM
MANUFACTURER DESVRES ARIANA
REMARKS
NAT
SAMPLE TO BE PROVIDED FOR CLIENT
SUPPLIER
https://www.desvresariana.co m/en/collection/Dorica
CONFIRMATION
Owner
MR.MOHAMED FARUQE
Project
VILLA 123
Location DUBAI
ITEM
CODE WALL TILE
-
AREA
FINISH ALL FLOORS
QUANTITY
DRAWING REF.
REFER TO BOQ
SPECIFICATIONS DIMENSION
IH111
MARQUINIA SELECT 120*278 CM
MANUFACTURER ABK UP MARQUINIA SELECT
REMARKS
NAT
SENSI-
SUPPLIER
https://www.abk.it/en/collecti on/Sensi-Up
SAMPLE TO BE PROVIDED FOR CLIENT CONFIRMATION ALL FLOORS STAIR 02 WALL - G.F POWDER ROOM,DINING AREA,FAMILY BATHROOM -
Owner
MR.MOHAMED FARUQE
Project
VILLA 123
Location DUBAI
ITEM
CODE WALL TILE
AREA
5
FINISH BASEMENT FLOOR
QUANTITY
REFER TO BOQ
SPECIFICATIONS DIMENSION
DRAWING REF.
IH111
PORCELAIN TILE - MASTER WHITE 120*120CM
MANUFACTURER LEA CERAMICHE MASTERPIECE MASTER WHITE
REMARKS
NAT
SAMPLE TO BE PROVIDED FOR CLIENT CENIMA AREA
SUPPLIER
https://www.leaceramiche.com /collection/masterpiece#color4936
CONFIRMATION
Owner
MR.MOHAMED FARUQE
Project
VILLA 123
Location DUBAI
ITEM
CODE WALL TILE
AREA
12
FINISH GROUND & FIRST FLOOR
QUANTITY
REFER TO BOQ
SPECIFICATIONS DIMENSION
DRAWING REF.
IH111
CALACATTA- VENA-ORO 120*280 CM
MANUFACTURER ABK-SENSISIGNORIA CALACATTA- VENA-ORO
REMARKS
POLISHED
SUPPLIER
https://www.abk.it/en/collecti on/Sensi-Signoria
SAMPLE TO BE PROVIDED FOR CLIENT CONFIRMATION FOYER&DINING AREA,GUEST SUITE 01&03 - F.F GUEST SUITE 04
G.F
Owner
MR.MOHAMED FARUQE
Project
VILLA 123
Location DUBAI
ITEM
CODE WALL TILE
AREA
18
FINISH GROUND & FIRST FLOOR
QUANTITY
REFER TO BOQ
SPECIFICATIONS DIMENSION
DRAWING REF.
IH111
DORICA GREIGE 120*280 CM
MANUFACTURER DESVRES ARIANA
REMARKS
NAT
SAMPLE TO BE PROVIDED FOR CLIENT GUEST SUITES 1,2,3,4,5
SUPPLIER
https://www.desvresariana.co m/en/collection/Dorica
CONFIRMATION
Owner
MR.MOHAMED FARUQE
Project
VILLA 123
Location DUBAI
ITEM
CODE WALL TILE
AREA
16
FINISH BASEMENT & GROUND FLOOR
QUANTITY
REFER TO BOQ
SPECIFICATIONS DIMENSION
DRAWING REF.
PORCELAIN TILE 60*60CM
MANUFACTURER BY CONTRACTER
REMARKS
-
SAMPLE TO BE PROVIDED FOR CLIENT
SUPPLIER
CONFIRMATION
IH111
WALL FINISHES BOOK OF SPECIFICATIONS
CODE
SPECIFICATION
1
ABK -SENSI-UP-MARQUINIA SELECT(120*278 CM )
2
PAINT FINISH
3
ALUMINUM FINISH ON MDF BOARED
4
WOOD FINISH TYPE 1
5
LEA CERAMICHE-MASTERPIECE MASTER WHITE 120*120CM NAT.
6
CURTAINS
7
HPL LOUVERS
8
DESVRES ARIANA-DORICA AVORIO 120*280cm NAT.
9
MIRROR
IMAGE
REFER TO ENLARGMENTS
REFER TO ENLARGMENTS
REFER TO GLASS SCHEDULE
CODE
SPECIFICATION
10
EXTERIOR STONE
11
CURVED LAMINATE VENEER
12
ABK-SENSI-SIGNORIACALACATTAVENA-ORO 120*280
13
PAINTED WOOD FINISH/ SLAB COVER
14
WOOD FINISH/ KITCHEN CABINETS
15
DARK TINTED GLASS
16
60*60CM TILES
17
DORICA AVORIO 120*280
18
DORICA GREIGE 120*280
IMAGE
REFER TO ARCHITECTURAL PACKAGE
TO MATCH PAINT FINISH IN FOYER & DINING AREA
CODE
SPECIFICATION
19
LAMINATE WOOD TYPE 1
20
WOOD VENEER TO MATCH DOORS FINISH
21
WOOD CLADDING PUTTIED AND PAINTED WITH TEXTURED PAINT AS SPECIFIED TYPE 1
22
WOOD CLADDING PUTTIED AND PAINTED WITH TEXTURED PAINT AS SPECIFIED TYPE 2
23
LAMINATE WOOD TO MATCH DOORS FINISH
24
ROTATING VENEER WOOD PANEL
25
CLEAR GLASS
26
OPAQUE GLASS
27
LAMINATE WOOD TYPE 2
IMAGE
REFER TO 3D SHOTS
28
FLUTED WOOD PANELS
29
PAINTED IN BRASS FINISH METAL INLAY
30
WOOD VENEER TYPE 2