Page 1

Date: 8/03/05

Style #: 64401F.178 Description: Glide T Season and Sport: Fall 2006 Fit: Semi Fitted Sample Size: M Colours: Fabrics: #1: MidZero #2: convector back #3: Thread Color: matching Notions:

Base Reference: Size Range: XS-XL Category: ALTERNATIVE - sub front panel - sub left cuff panel 1.75” width - collar CB height 1.125 CF height .5” - shifted sideseams - no underarm seam - slight shaped hem - shallow V-neck

(designed with shifted sideseams & no underarm seams minimal underarm abrasion)

Sublimated graphic and relaxed fit combine performance, style and comfort. MidZero is a full stretch wicking midweight base layer that is fleeced on the inside for amazing comfort Convector provides comfort and warmth by allowing air to circulate between the fabric and the skin surface Zone Construction: Well-regulated combination of MidZero on the front and sleeves with Convector on the back Shallow V-neckline for better coverage Glide strip sublimated front panel Detailed with flat lock stitching

The design brief was to design a new thermal top with graphics, something that was fresh and energetic, different from what they’ve done in the past. I wanted to keep the collection cohesive, so I decided to go with stripes of some sort, as I had already designed that for the men’s. What I came up with was a sublimated panel (cost efficient) across the chest on an angle, which avoids abrasion on sensitive areas, as well as adding a hit of colour to the sleeve, to set the top apart with something new. The design of the graphics was also carried through to a fitness tank as well.


Date: 9/05/05

Style #: 70850U Description: Flex Jacket Season and Sport: Fall 2006

Page 2

Fabrics: Microfine Colors: TBA Size Range: S - 2XL

Sample Size: L Self zip flap

Fabric & Trim ID:

Base Reference: UJKT-RELAX

D B

1 1

E

2 1

4 2

1 note: no sideseams!! panels on fold.

2

3

(designed with no sideseams for minimal underarm abrasion) C

1

E E Fabric: 1 = Main body 2 = Contrast 3 = stretch Scotchlite fabric 4 = Mesh

1 1

Trims: A = 3M Scotchlite bolt logo heat transfer B = Sugoi Logo Label C = Locking pocket zippers D = Reflective locking front zipper E = Elastic binding

3M Scotchlite bolt logo heat transfer

20.5mm 33mm

1

1

3

A

MicroFine offers a comfortable balance between water resistance and breathability Well positioned underarm mesh vent for ventilation and seam reduction Inner front zip flap to reduce draft Full front zipper is trimmed with 1/4 inch reflective on either side of the teeth 2 comfortable front zip pockets Contrast bound collar, bottom and cuffs Flex Stretch Reflective panels along mid sleeve and back armhole provide visibility with mobility

3

2 4

1 2

This piece was developed offshore, with prototypes and samples shipped back to us designers to make adjustments and revisions. Design needed minimal underarm seams and high visibility. The well placed contrast panels and reflective panels lends itself to a masuline look, with high visibility for jogging in less than bright conditions. slight articulated elbows for less fabric creasing on the inside of the elbows for comfort (something carried over from my skiwear development days)


Date: 2/15/05

Style #: 57504U.184 Description: Round the World Jersey Season and Sport: Spring 2006 Fit: Classic

Base Reference: Classic Jersey

Sample Size: L

Size Range: S-2XL

Fabrics:

Reference: Core Function

#1: Technifino

mesh underarm panel, no underarm seam if possible

#2: Technifine Mesh (underarm and back) #3: Sublimation on TechMesh

shifted sideseams

Thread Color: matching Notions: -16" CF #3 inv zip , Woven Tab on CB pkt

sub panel in mesh for extra ventilation TechniFino: the lightweight standard for comfort, moisture transfer and performance TechniFine Mesh: offers quick-drying ventilation, moisture transfer and breathability with a light texture and a non-transparent appearance Sublimated front graphic for visual impact Front Chest Panel, Sides, underarms and full back panel in TechniFine Mesh 16 inch invisible front zipper 3 elasticized back pockets expand easily

(designed with shifted sideseams & no underarm seams minimal underarm abrasion)

Design was also considered for a Run T

To incorporate Mesh in the hot zones while giving enough wind protection on the front. No underarm seam on sleeve, and shifted sideseam. Sublimated front panel to give interest, while using mesh to give needed ventilation across the upper chest and avoiding abrasion areas. Shoulder detailing enhances male physique


Date: 4/14/05 12/22/04

Style #: 47306U Description: Mobil Pant Season and Sport: Spring 2006 Run Fabrics: Mobil / Mobil Mesh Colors: Stone, Black Size Range: S-2XL

Sample Size: L

Base Pattern: 47303U

Outer View: Front, Back and Side:

Mobil is a lightweight, quick-drying stretch woven that combines the properties of a microfiber with 4-way stretch mobility Locking zip back pocket that features an electronics mesh sub-pocket with cable feed hole along side seam Waist drawstring with elastic insert in back 3D logo treatment is etched into side panel Surfer front fly is held closed with snap and mesh gusset

Design brief was to design a pant that had a bit of surfer influence, can be worn for a hike or jog, as well as to the pub for a drink. I initiated the logo embossing at the larger size to make it more stylized and more of an understated. branding. We tested this method out first on a spring Run Jacket to test the market, and after it received well, I was able to carry it out in a few more pieces in this fall season’s line up.

Features: - 2 front set-in, single welt pockets - 1 back secured pocket with interior electronics pkt. - reversed emboss detail on front - lowered GUSSETED fly front with snap waist closure - 6 bartacks, new one on front fly mid way. Close lower fly opening - logo moved to side above knee seam - double needle topstitch all seams - edgestitch pkt facing, use microfine for front pkt facing - interline waistband with sew-in interfacing - stay stitch waist elastic to inside waistband at CB - remove wired hole


Date: 7/14/05 updated aug 16/05

Style #: 65101F Description: Fino PullOver Season and Sport: Fall 2006 Fit: Semi Fitted Base Reference: Convector Zip Neck Sample Size: M Size Range: XS-XL Colours: Vivid/white, Rave/white, Smoke/black Segment: CORE Fabrics: #1: Finotherm #2: #3:

- slight V dip in CF of neckline - ideally the horizontal front chest seam is 2� above bust point - Flatlock seams, DN hem/cuff

Thread Color: matching, except for contrast panel, blk. Notions:

More than just cozy comfort, highly technical fabric for thermal layering. FinoTherm offers accelerated thermal wicking with a fleeced inner side and a linear texture on the surface Raglan sleeves Contrast panel detailing Detailed with flat lock stitching Contrast topstitching accents seam line Inner front zip flap to reduce draft 6 inch invisible front zipper

original design: shoulder contrast contrast stitch detail

semi-toned down, decided it was too plain

Design brief was to design a thermal top that pushed the limits a little bit, to introduce a different look. After sampling, it was decided that another design of mine with graphics took that step, and we toned this one down for the safe sale.


Date: 01/27/2005

Style #: 29994U Description: Tri Suit Season and Sport: Spring 2006 Tri Fabrics: Nylon Lycra / Support Mesh / Power Lycra Colors: Blk Fit: Fitted

Base Reference: Wireless Tri Suit

Sample Size: L

Size Range: S-2XL

Fabrics:

Reference:

#1: Nylon Lycra #2: Support Mesh #3: Power Lycra (bottom) Notions: Front, Back and Side Views:

FinoStretch is a lightweight stretch base with maximum moisture transfer and minimal retention Support Mesh is blended with spandex for excellent stretch, recovery and breathability Piston provides a power-stretch layer of surface support that slows skin and muscle vibration, conserving energy while reducing fatigue and increasing circulation Support Mesh vents the front, sides and back Higher front neckline to reduce drag in the water Detailed with flat lock stitching Front locking zipper stabilizes zip tab 2 elasticized mesh back pockets 9 inch inseam

Design brief was to redesign Tri Suit. I decided to emphasize on what makes a male triathelete proud in terms of their physique: lean chest, broad/strong shoulders and muscular thighs.. to create the V illusion for the torso, and emphasize muscle shape on the thigh. Minimal seaming on the front to minimize abrasion at chest/nips, maximum cooling at side-back panels with ease of reaching pkts on a slight angle while riding or running.


Style #: 50809U Description: Tornado T Season and Sport: Spring 2006 Fit: Relax T

Base Reference: Hurricane

Sample Size: L

Size Range: S-2XL

Fabrics: #1: Technifino - PAT #2: TechnifineMesh - INC (underarms) #3: TechnifineMesh - WHT (side panels) Thread Color: body colour, pat/pat, inc/inc Notions: Woven Tab

Front, Back and Side Views:

Date: 2/17/05

Comments: N0 side seams & underarm seams

garment  

garment design examples

Read more
Read more
Similar to
Popular now
Just for you