MATERIAL DATASHEET
AgZnO Material: Alloy Composition: Revision: Date: Page:
Propelling Contacts Into the Future
Silver Zinc Oxide AgZnO (8) / (10) A 01-01-2022 1 of 1
ARTICLE NO
AgZnO-W-001
OVERVIEW 1.1 Context
This datasheet is applicable for AgZnO Silver Zinc Oxide material in wire form.
1.2 Supply State:
Wire
1.3 Manufacturing Technology:
Powder Metallurgy by mixing of metal powders, oxidation, moulding, extrusion followed by cutting.
CHARACTERISTICS • Low Contact Resistance • Lower Erosion for Small Current Limiting Breaker • Environmental Friendly
2.1 General
PROPERTIES 3.1 3.2 3.3 3.4
Silver Content (Wt.%): Density (g/cm3): Resistance (μΩ.cm): Vickers Hardness (HV):
MICROSTRUCTURE 200x
Horizontal
Vertical
AgZnO (8) 91 - 93 9.55 - 9.75 2.05 - 2.25 65 - 100
AgZnO (10) 89 - 91 9.45 - 9.65 2.10 - 2.30 90 - 100
APPLICATION
Voltage Relay
Small Contactor
Circuit Breaker
Motor Protection Breaker
©2022 Juxing Electrical Contact Technology Pte Ltd This publication are prohibited to be reproduced in any form in whole or part without the express written consent from Juxing Electrical Contact Technology Pte Ltd (JECT). JECT reserved all rights to make any changes to the material and/or alloy composition to improve performace and reliability without prior notice. The material data indicated in this sheet is based on our internal assessment and should not be treated as the absolute without confirmation from Juxing.