1 minute read
Adhesives & Multi-Mat™
3M™ Adhesive
• Long-lasting adhesive provides a solid, permanent bond. • Adhesive layer is protected by a coated liner to allow easy release.
Advertisement
Size Type Part No. 12” x 24” Sheets
99A-467-S12
Rolls
99A-467 99A-468
SEKLEMA™ Mat
To order pre-applied onto plastic or metal sheeting:
Size Part No. 12” x 24” ADH-010 24” x 24” ADH-020 24” x 48” ADH-030
• 2-sided • Clear greaseless surface
Size Part No. 12” x 12” TKM2-C122 12” x 24” TKM2-C124 24” x 24” TKM2-C24 This greaseless clear product is recommended for use with products that will require adhesive to be applied after engraving.
Multi-Mat Plus™
Size Part No. 6” x 12” TKM2-612 9” x 12” TKM2-912 12” x 12” TKM2-122 12” x 24” TKM2-124 24” x 24” TKM2-244
laser table with Multi-Mat™
Multi-Mat Plus™ is a 2-sided silicone-like product used to hold down thin materials, and will hold the material flat and in focus.
Magic Peel™ Masking Remover
MSK-PEEL
With one swipe, Magic Peel™ lifts an edge of protective plastic allowing you to easily grab the plastic and pull it off.
• Works on most materials covered with protective plastic masking such as aluminum, brass, engravable plastic and plexiglass. • Magic Peel™ won’t scratch or scuff highly polished surfaces. laser table without Multi-Mat™
Multi-Mat Plus™ will last for many years under normal use. The permanently tack surface renews itself when wiped off with a bit of soap and warm water.
Adhesive Remover
Works in 60 seconds!
• WATER SOLUABLE ADHESIVE REMOVER removes glue left on surface after removing decals or film • Works on painted surfaces, some plastics and other surfaces • Not recommended for anodized finishes
