Joker Journeyman Parts Store------------------------------------------------ 42 1965 Chevrolet Impala Sport Coupe V8 ...pg 8

Story by John Gunnell

One of the definitions of the journeyman level of experience is “a person who has completed an apprenticeship program or is an experienced worker, and not a trainee, and is fully qualified and able to perform a specific trade without supervision.” That description fits Clayton Rogers, a 22-year-old man who Greg Stelse trusts with not only very important jobs in his shop, but also with the performance of his gasser-style race car at the track.

Stelse owns a five-year-old specialty-automotive business called Greg’s Speed Shop LLC (www.gregsspeedshopllc.com). It’s there that Rogers works as a full-time mechanic—a job he seems to love. But while you might think a young mechanic would want to get away from cars on weekends, Rogers spends many Saturdays and Sundays traveling to drag strips to wrench on Stelse’s ’57 Pontiac quarter-mile muscle machine.

Stelse calls the two-tone green ’57 Pontiac Star Chief “The Joker.” The car is usually found inside Greg’s Speed Shop. But the work that involved turning the “Poncho” into a nostalgic drag racer actually got off to a dismal start, according to Greg’s wife Leah.

“Greg purchased The Joker from a man who had it stored away in an old garage in Missouri,” Leah told Musclecars Plus. “It had suffered in terms of rust and deterioration from all the years it was stored. In fact, the ’57 Pontiac body was just a shell back then.”

Plucked from what Leah describes as “the depths of despair” in 2014, the Star Chief fit into a vision that Greg had in his mind. “He wanted to make The Joker a worthy vehicle again,” Leah recalled. “And he wanted to be the one behind the steering wheel when it was racing down the track again.” Clayton is helping Greg reach for that dream. The car has been torn apart and rebuilt numerous times. It has lots of outer patina and Clayton’s job is to make The Joker’s innards work well. Years before Greg opened his speed shop, he brought the Pontiac into his old GS Trucking Co. in New London, Wis. where it got its first teardown and a new lease on life. He and his truck

An artistic photo of the Joker at the annual Symco Rod & Kustom Weekender event in 2021. With its focus on “old school” hot rod, Symco is the perfect Joker venue.

mechanics ripped the car apart and put it together as a straight-axle dragster. Now, he takes the car racing during the warm months. On those weekends, Clayton goes to the drag strip with the car.

The Joker has been successful in racing. Leah reports that it “has participated in many races over the years and will continue to run many more years.” After Clayton and Greg met in October 2019, Clayton was hired to work at the shop. Today, he does mechanical restoration on everything from Plymouth GTXs to Studebaker Hawks.

Clayton also travels with The Joker. “When we blow an engine or tranny during a race, we have spares in the race truck,” Greg exDespite having only three years of hands-on experience at Greg’s Speed Shop, Clayton says he’s been into old cars for more years than that. My father and grandfather are old-car hobbyists,” Clayton

explained. “Grandpa has a ’69 Mercury Montego and Dad has a ’53 Ford. I grew up in an old car family and muscle cars are in my blood, too.”

In Feb. 2020, The Joker underwent another complete redo that covered work such as replacing the OEM glass windows with lighter weight windows better for drag racing.

The car sitting inside Greg’s Speed Shop LLC in 2019. Since redoing this main building that year, Greg Stelse has added four additional buildings to his campus.

In late-2018, legendary customizer Gene Winfield visited Greg‘s Speed Shop and helped decorate The Joker’s windows with vintage drag racing stickers.

Clayton Rogers has swapped engines and transmissions in the Joker many times right at the race track. He said he learned a lot from drag racing The Joker with Greg. Clayton owns two Fords—a ‘31 Model A hot rod and a custom ’51 Tudor Sedan. He says that both cars need more work before he will consider them done, but they look like very good builds in photos he has. “They’re getting there,” Clayton admitted. “And I’m learning a lot from working on cars at the shop and tweaking The Joker at the dragstrip.”

Clayton learned his basics from working on vintage cars with his father and grandfather. “I also took automotive technology classes at Mid States Technical College in Wisconsin Rapids,” he said. “I learned to do a lot of things in school, but I also learned a lot at Greg’s Speed Shop over my three years there. We deal with lots of different cars.”

Clayton says his talents are best applied to mechanical repairs, rather than body work and paint. “I’m most comfortable with the mechanical side of things,” Rogers admitted. “I like solving problems that cars have when they come into the shop and I also like traveling all over the country to events where we take The Joker.” Greg Stelse added, “Someday Clayton will probably be running the shop, rather than just working in it.”

While he seems to be a “Ford Guy,” Clayton admitted that his “dream car” is a 1968 Dodge Charger R/T. “I love the looks of the R/T and they seem rare.” He’s correct. The R/T (Road/Track) was introduced in ‘67 as a special muscle car version of the mid-size Dodge Coronet (there was no R/T model offered for fastback Chargers in 1967). Out of almost 100,000 Chargers sold in ‘68, 17,584 were ordered as R/T models.

While writing this column, we wondered if Clayton Rogers was named after the famous Clayton dynamometer that William Clayton designed to simulate the inertial and load forces encountered by a performance car. We never got the answer, but we can tell you that Clayton Rogers is a real dynamo when it comes to enthusiasm for old cars and for making The Joker fly down the quarter-mile a little faster each time. “He really knows that old car and knows how to make that big Pontiac V8 flex its legendary racing muscle.”

The Joker gets another redo on April 7, 2020. As Greg and Clayton are learning, race cars are never done, they just keep getting better.

Edelbrock is now offering Victor CNC 11-degree, 6-Bolt Cylinder Heads for GM LS3 engines. The heads utilize the popular LS 6-bolt design, making them compatible with the GM LSX block and all aftermarket iron or aluminum 6-bolt per cylinder race blocks. The 6-bolt-per-cylinder design offers increased clamping capacity over the standard factory 4-bolt configuration. This drastically improves head gasket sealing, making them ideal for high-compression naturally aspirated engines or high-boost applications. The heads are manufactured with premium materials and are available either bare or assembled.

For more information please go to www.edelbrock.com

K&N’s Blackhawk Induction air intake systems provide an oilfree synthetic filter media that provides increased airflow and exceptional engine protection without requiring oil, while a steel heat shield helps protect intake air from the high temperatures of your engine bay. The black powder-coated aluminum intake tube and all-black components allow the system to integrate seamlessly underneath your hood, and completely replaces your factory air filter and intake tube.

For more information please go to www.knfilters.com

Wilwood has added two new brake kits with staggered caliper mounting for 1964-1971 Buick, Oldsmobile and Pontiac 10-bolt rear differentials. Created specifically for 1968-1971 Firebirds with staggered shocks, the Dynalite Pro Series brake kits are offered with 12.19-in. rotors and DynaPro Low-Profile with 11.00-in. rotors. High-strength, forged aluminum calipers with four stainless steel pistons generate balanced clamping force in high-tech style with modern braking performance. They are available in red or black powder coat finish, which comes standard, with 22 optional colours also available.

For more information please go to www.wilwood.com The direct bolt-in Flex-a-fit aluminum radiator for the 1964-1966 Ford Mustang with a V8 engine swap from Flex-A-lite is offered with a pre-mounted electric fan from the factory. The dual 1-in.

aluminum radiator core is hand welded to the patented T-tank side tanks, while the T channels offer a durable mounting system for the radiator, electric fan and optional oil cooler or expansion tank. The radiator utilizes OE mounting points and features 2row, 1-in. tubes.

For more information please go to www.flex-a-lite.com

Canadian made CAMOil is the only API certified engine oil with highest level of ZDDP specifically formulated for flat tappet engines. With an additive that clings to moving parts when the engine is stored for long periods.

For a retail location near you. camoils.com

OR contact

specialtyoils@gmail.com By phone: 1-403-828-7168

• Specializing in Holley ‘Square Bore’ 4 Barrel Carburetors Since 1994 • We do everything from OEM Restorations to Street Ready and Race Prepared Carbs • Our Carbs are completely

Remanufactured and Re-Coloured to their original ‘Holley Gold’ Specs • We Offer the Highest Quality at the Best Prices Guaranteed! 2015 CARB PRICE LIST 2021 CARB PRICE LIST

#4548 450 cfm VacSec $350 #1850 600 cfm VacSec $295 #3310-2 750 cfm VacSec $350 #3310-1 780 cfm VacSec $395 #4776 600 cfm Dbl Pump $395 #4776 600 cfm Dbl Pump $395 #4781 850 cfm Dbl Pump $395

#4412 500 cfm 2BBL $325 #4777 #4776 650 cfm Dbl Pump 600 cfm Dbl Pump $395 $450 #4548 450 cfm Vac Sec $450 #4778 #4777 700 cfm Dbl Pump 650 cfm Dbl Pump $395 $395 #1850-2 600 cfm Vac Sec $350 #4779 #4778 750 cfm Dbl Pump 700 cfm Dbl Pump $395 $395 #80783 675 cfm Vac Sec $425 #4780 #4779 800 cfm Dbl Pump 750 cfm Dbl Pump $395 $395 #3310-2 750 cfm Vac Sec $395 #4781 #4780 850 cfm Dbl Pump 800 cfm Dbl Pump $395 $395 #3310-1 780 cfm Vac Sec $495 #4781 850 cfm Dbl Pump $395

Note: all prices on above carbs are plus core or charge. $50 for VacSec, $75 for Dbl Pump. Note: All prices on above carbs are plus core or $50 charge. Electric Choke add $50

Fully Restored /Factory Correct / Ready to Run LIST #3367 LIST #3140-1 LIST #3419 LIST #3367 LIST #4609 LIST #3613

Let Us Restore Your Holley!

Great Canadian Oil Change--------------------------------------Advertiser Index 24 360 Fabrication ------------------------------------------------- 37 B&W Insurance ---------------------------------------------------7 Barry-Hamel ----------------------------------------------------- 39 BowTie Auto Parts ---------------------------------------------- 42 CAM Oils --------------------------------------------------------- 45 Classified Motorsports ----------------------------------------- 44 Easy Build ------------------------------------------------------- 46 EG Auctions ----------------------------------------------------- 41 Eibach --------------------------------------------------------------2 Golden Leaf Automotive --------------------------------------- 27 Good Vibrations ------------------------------------------------- 31 GRiP Tire --------------------------------------------------------- 19 Hardcore Holley ------------------------------------------------- 45 Ididit ----------------------------------------------------------------5 JellyBean Auto Crafters ---------------------------------------- 45 KMS Tools ------------------------------------------------------- 15 LMC Truck ------------------------------------------------------- 48 Lordco Auto Parts ---------------------------------------------- 11 Mopac Auto Supply --------------------------------------------- 47 Performance Hoist ------------------------------------------------3 POCO Car Show ------------------------------------------------- 21 Preston GM ------------------------------------------------------ 43 Stone’s Speed Shop -------------------------------------------- 13 Holley’s all-new Sniper EFI 5-In. Digital Dash is a plug-and-play touchscreen display that is pre-loaded with three easy-to-read layouts that provide critical system information. This information includes throttle position, manifold air pressure, air/fuel ratio, battery voltage, engine coolant temperature, RPM and Speed thanks to the provided magnetic GPS antenna included in the kit. The 5-In. Digital Dash also offers tuning, the handheld wizard and data logging which means you don’t have to keep your 3.5-in. display plugged into the system. It includes two dash mounting stand-offs and a suction cup mount.

For more information please go to www.holley.com

McLeod Racing’s RST Twin Disc Clutch kit is intended for high-horsepower street vehicles whose owners want to run up to 800 horsepower but still remain completely suitable for the street. The kit features organic lined clutch discs to provide smooth engagement with a soft pedal effort that make the kit ideal for the street. The kit is not intended for competition use but will provide a race-like feel to your muscle car.

For information please go to www.mcleodracing.com

No Welding • Maintenance Free

Residential • Commercial

55-13325 115th Avenue, Surrey 604.589.4280 | Toll Free: 888.589.4280 www.easybuildstructures.ca

Easy Build Structures pre-engineered 2” x 3” galvanized steel framing system uses a unique “slip-fi t” design that simplifi es the installation process with the added strength and durability to withstand our Canadian winters. Whether you are looking for roof-coverage only to protect your investment or fully-enclosed garage and warehouse packages,

Easy Build Structures has the building for you.

Our sales team will work with you to customize your structure package to meet all your requirements. Easy Build packages come complete with everything you need, ranging from overhead and man doors, windows, insulation options, sheeting and fl ashing colours, and hardware.

Our structure widths range from 10’ through 50’, with the length being as long as you need. Our engineer can provide you with stamped and sealed drawings, Schedule B and C-B, and site inspections to help assist you with any permitting processed required by your municipality. These services also include our CSA-A660 certifi cation for pre-engineered steel structures in Canada.

Take advantage of our full installation services throughout British Columbia, including complimentary on-site consultations in the Lower Mainland to fully design your custom structure. Furthermore, all our building packages CALL NOW FOR A CUSTOM QUOTE: 604.589.4280 are designed as do-it-yourself kits with a step-by-step installation manual.