Joiners Magazine December 2024

m

a

g

a

z

i

n

e

Joinery, Cabinetmaking & Kitchen Manufacturing Industries

December 2024

door hardware gliding, sliding, hiding

saw stories usage in todays factories

handle pics contemporary & traditional

NEW!

Hawa Folding Concepta III Folding doors give you even more design freedom.

The latest addition to the Hawa Concepta III family loves transformation.

And it’s at the cutting edge when it comes to practical flexibility in the kitchen and the living area.

Large-scale constructions gain another aspect of versatility thanks to the innovative folding/slide-in hardware: doors can be simply folded as if by magic, before disappearing into the smallest of spaces. Useful shelves can thus be transformed into aesthetic cabinets in an instant – and vice-versa.

KEY ADVANTAG ES

> > > > >

A maximum of 17 screws in total to mount the hardware onto the carcase panel.

Wide range of door heights from 1200mm to 2700mm possible.

Fast and easy installation in under an hour.

Intuitive push to open with a simple tap to the door or conventional handle design models available.

Ultra narrow parking of 110mm required.

Watch: Easy Installation.

Watch: All about Hawa Concepta III.

To learn more about Hawa Folding Concepta III contact your local Häfele Representative. sales@hafele.co.nz 0800 442 334 www.hafele.co.nz JOINERS Magazine December 2024 page 1

for a

perfect finish start with GoldenEdge HMR0 GoldenEdge HMR0 is the proven MDF that provides a perfect paint finish. It’s that simple.

Eco friendly GoldenEdge HMR0 (high

bathroom vanities - everywhere a perfect paint finish is required.

GoldenEdge HMR0 is just one of the many MDF

moisture resistance zero emissions) is rated

products provided by Nelson Pine Industries

E0 and comes in 9mm, 12mm, 16mm, 18mm

using the advanced technology of the Küsters

and 25mm thicknesses.

continuous press and offering an unsurpassed

It’s recommended for kitchen units, cabinets,

HMR0

range of board densities and thicknesses.

Ec Frienod

helpin

g the e

nviron

ly

ment

FURNITURE FITTINGS& No. 32080 38

Nelson Pine Industries Ltd, Nelson, New Zealand

www.nelsonpine.co.nz JOINERS Magazine December 2024 page 2 MS 21526 J

m

a

g

a

z

i

n

e

Conference meet 16 The annual Master Joiners Conference provides members the opportunity to network with each other and with their supply partners in convivial surroundings, and also to applaud their award winners for another year.

COVER Handles p.33 Photo courtesy Katalog

Handle options 28 COLUMNS Master Joiners 4 Nathan Busch reflects on the accomplishments and milestones of the past year for the Master Joiners Association, acknowledging the collective effort and strategic vision of the organisation.

Laminex Update 10 Rachel Silcock appreciates her first time at a NZJMF Conference and comments on how the theme of ‘Crafting the future’ resonates with Laminex’s own focus on operational excellence.

NKBA news 77 The NKBA showcase their Best Kitchen and Best Bathroom award winners and outline the standout achievements in what has been a very busy year for the organisation.

Steering a Course 78 Ian Featherstone suggests this time of year provides us with a good opportunity to reflect, reset and recharge. A time to evaluate past performance and strategise for the year ahead.

From highly visible to practically hidden, door and drawer handles define the look of the room. We provide coverage of traditional and contemporary options to assist in this timeless decision.

Hanging doors

36

Sliding, folding, lifting, hiding - the right mechanism for the right place and right space. We look at recent trends in door hardware systems showcasing aesthetic appeal, easy installation and effortless use.

Saw stories 50 Sliding saws and beamsaws remain prominent in many panel and joinery shops, one for its allrounder utility status and the other for its ability to provide simple cutting in large volumes very efficiently. We talk to some users.

REGULAR

Industry contribution 74

News & Info 4 - 14

Having recently won the prestigious Ken Monk award for ‘contribution to industry’ it’s worth stopping to acknowledge exactly how much Andrew Bellamy has achieved through his work with Master Joiners, BCITO and its predecessor JITO. This report from BCITO.

State of the Industry 80 NZJMF membership 82 Classifieds 88 Advertiser index 88

Tips for getting home safe - p.72 JOINERS Magazine December 2024 page 3

from the president 17.11.2024

A year of accomplishment With Christmas just around the corner, it’s a fitting moment to reflect on the year that’s been—a busy, challenging, and rewarding one for all of us at Master Joiners. Whether you’re wrapping up projects or taking a well-earned break, this time of year reminds us to celebrate our accomplishments and recharge for the year ahead.

What a remarkable year. 2024 has indeed been a milestone year for Master Joiners. With the acquisition of JMF NZ shares, we’ve taken a significant step toward strengthening our industry’s position and futureproofing its growth. This achievement is a testament to the collective effort and strategic vision we share as an organization.

But this is just one piece of the puzzle. Let me highlight some of the other accomplishments we can all take pride in: 1. Utilizing the Partnership with Waihanga Ara Rau We’ve worked to secure longterm engagement for Master Joiners in developing the detailing qualification. From attending the strategic reference group to reviewing qualifications and mapping career pathways.

2. The Association Online Learning Platform Knowledge is power, and with the launch of our online learning platform, we are empowering members with tools to upskill and innovate. This platform is a critical step in fostering growth and adaptability within our industry.

3. Occupation Classification Codes By collaborating with STATS NZ and Immigration NZ, we’ve secured accurate occupational classification codes for joinery, ensuring our craft is properly recognized and valued on both national and international stages.

the Master Joiners community over the past year. From our collective achievements as an association to the individual stories of innovation and growth, this gathering was a testament to the strength and resilience of our industry.

The historic and elegant setting of the awards dinner reflects the heritage and prestige of the joinery craft.

4. Vocational Training Restructure Submission Our submission to the Ministry of Education on vocational training has helped align training programs with industry needs, safeguarding the pipeline of skilled professionals who will uphold and elevate our standards in the years to come.

5. Creative Strategy Branding Project The creative strategy branding project is reshaping how Master Joiners is perceived, ensuring we remain a trusted, modern, and recognizable brand in the joinery landscape.

6. A New Constitution Lastly, but by no means least, the implementation of our new constitution strengthens our foundation as an association and positions us to better serve our members and industry.

As we wrap up another successful year, I’d like to take a moment to reflect on one of the highlights of our calendar—the Master Joiners Conference, which was held in the beautiful city of Christchurch this year. It was a fantastic opportunity for our community to come together, celebrate our craft, and share knowledge and experiences that inspire us to aim higher.

JOINERS Magazine December 2024 page 4

The conference was full of memorable moments, but there were a few standout highlights that truly captured the spirit of the event. This year’s conference featured The Joinery Coach who brought a wealth of expertise and insight to our sessions. Bruce & Nigel’s guidance and passion were truly inspiring, providing us with new techniques, strategies, and perspectives to take back to our workshops.

The excitement of our night at the races. It was an evening of friendly competition, camaraderie, and fun. Whether you were betting on the horses or simply soaking up the atmosphere, it was a perfect way to kick off the conference with energy and excitement.

The awards ceremony held at the iconic Christ’s College was a night to remember. It was a celebration o f e x c e l l e n c e i n j o i n e r y, recognizing the skill, dedication, and innovation that define our members. Seeing such remarkable projects and individuals honoured in such a historic and elegant setting reminded us all of the heritage and prestige of our craft.

Conference wasn’t just about events and awards; it was a reflection of the hard work and accomplishments of everyone in

As we look forward to 2025, let’s carry the momentum with us.

The relationships we’ve built, the lessons we’ve learned, and the inspiration we’ve drawn from one another will fuel our success in the year to come. This year has shown us the power of exchanging ideas—of working together to achieve common goals. As we move forward, let us continue to share our insights, creativity, and passion for joinery, ensuring our industry thrives for generations to come.

Before I close, I’d like to leave you with a thought that speaks to the heart of collaboration and innovation: “If you have an apple, and I have an apple, and we exchange these apples, then each of us still has one apple. But if you have an idea, and I have an idea, and we exchange these ideas, then each of us has two ideas.”

Thank you, and here’s to a welldeserved break and a prosperous new year ahead.

Nathan Busch National President Registered Master Joiners

EgmontAir D u s t & Fu me E x tracti on

Your dust extraction specialists 0800 781 200

»

• Create a cleaner and more productive workshop

A BREATH OF FRESH AIR FOR YOUR WORKPLACE

• Protect your employee’s health with the latest in dust extraction • Phone for technical advice or information

• Wood Dust Extraction • Exhaust Fumes Extractors

• Welding Fume Extraction

• Centralised Extraction Systems

• Spray Booths

• Extraction Fans

• Suction Benches

• Grinding Dust Extractors

EgmontAir D u s t & F u m e E x t ra c t i o n

sales@egmontair.co.nz www.egmontair.co.nz

0800 781 200 Fax 06 278 1225

JOINERS Magazine December 2024 page 5

from the Publisher

m

a

g

a

z

i

n

e

The magazine for the joinery, cabinetmaking & kitchen manufacturing industries Official Publication of the New Zealand Joinery Manufacturers Federation

Editor Michael Goddard michael@joiners.net.nz Panel saws at the university. p.52

Publisher Bob Nordgren bob@joiners.net.nz

Roll on 2025!

Here we are at the back end of 2024. It’s been a topsy turvey year with most of us keen to see 2025 arrive. All that said the last quarter has been an interesting one what with the annual Master Joiners Conference and Awards held in Christchurch and a couple of open houses run by Jacks, Biesse NZ and Farnese NZ. The Awards are covered fully in this edition featuring both the new Premier Award won by Cube Dentro and the Supreme Award won by Grandvue Joinery. The Premier award covers the cabinetmaking scene while the Supreme award covers the timber use scene. We have all the awards and features on the two big awards as well as the Apprentice awards recognising the up and comers who are the future of the wood joinery industry.

M 42 Aldersgate Rd, Box 27-513, Mt. Roskill, Auckland, 1440.

Ph: +64-9-624 4680

Subscriptions & Mailings bob@joiners.net.nz

The Conference was a positive event as well. Seeing central Christchurch years on from the earthquakes in its rejuvenated form was really inspiring. It is a place worth visiting. The open houses are important too. Since the demise of the AWISA Exhibition, last held in 2018, industry players have taken up the challenge and are now turning to their own inhouse shows. From what I have seen and heard all three events run recently have been successful generating some sales but more importantly real interest for the coming year which is looking promising for the woodworking machinery scene and business in general.

There have also been other encouraging signs of growth as well.

We have some interesting stories about companies investing in plant and equipment and looking forward to next year in a very positive way. An interesting one for me was visiting Leitz Tooling here in Auckland who have invested in the latest in sharpening technology to service the local market. This is in my view an overt act of faith in the New Zealand market. We have a feature on saws with a surprising range available. An annual favourite is the pictorial feature on handles: something to mull over in the Christmas/New Year break.

Again, it has been a challenging year for most and we thank our advertisers for their ongoing support. Just as important, we thank our readership for being there once more. Michael and I wish everyone a very Merry Xmas and a Happy New Year and look forward to 2025 which will be our 30th year of publication Bob Nordgren

JOINERS Magazine December 2024 page 6

JOINERS Magazine Online www.joiners.co.nz

PRINTERS

DISTRIBUTORS

ISSN 1173-6836 JOINERS Magazine is the official publication of the New Zealand Joinery Manufacturers Federation. It is distributed to members of the joinery, cabinetmaking and kitchen manufacturing industries and is published quarterly in March, June, September and December. Advertising statements or editorial opinion are not necessarily those of the publisher, its staff, the New Zealand Joinery Manufacturers Federation Inc., or their executives, unless expressly stated. All articles printed in JOINERS Magazine are subject to copyright and cannot be reproduced without the express consent of the Publisher or the authors therein. Advertisements and articles are accepted without liability as to the accuracy or otherwise of the factual matters represented.

Image: Black Alicante Velvet 38

High quality, high-pressure laminate.

This globally recognised HPL is known for its ultra-durable AEON surface which is three times more wear-resistant than other standard laminates. With good stock levels held at Impey’s and Anthony Shearers, and edgetape available on close to 40 of the 60 designs, it’s rightly a favourite of fabricators and joiners.

SM

Browse the website to view the full range, order samples and access technical resources.

Leaders in high-pressure decorative laminates wilsonart.co.nz

wilsonart.co.nz JOINERS J JOI JO O OIINE NE NER ER RS Magaz M Ma Magazine agaz gaz ga azine iin ne ne D December Dec De e ce ec em mb mb ber e 2024 er 202 2 02 24 page 24 page ag ge g e7

Optimisim at SICAM The fifteenth edition of SICAM, the International Exhibition of Components, Accessories and Semi-finished Products for the Furniture Industry was held in mid October in Pordenone, Italy. This year 9,243 visiting companies (8,912 in 2023) from 113 countries (112 in 2023) came to Pordenone, a sign of the ‘maturity’ of an exhibition that confirms that it is an unmissable appointment for all the countries where furniture and furnishings are produced.

There were 692 exhibitors (650 in 2023) from 34 countries, on a net exhibition area of 19,135 square metres (18,420 in 2023).

‘We are extremely satisfied with the results of SICAM 2024,’ commented Carolina Giobbi, Head of Marketing and Communication.

‘These are important numbers, which testify to how carrying out a project that is at the service of exhibitors and visitors, that is created and constantly updated on their needs, allows a fair to maintain its value”.

A successful edition not only for the numbers, but also and above all for the climate of optimism and positivity breathed during the four days, from Tuesday 15th to Friday 18th October. ‘It

An increased number of exhibitors and visitors were a mark of Sicam 2024.

is undeniable that the furniture and furnishing sector is going through a complex period, but let me tell you that all this seemed to vanish in the aisles of the fair: lots of people, lots of smiles, lots of meetings, an uninterrupted flow of opportunities to see, touch, discuss the hundreds of ideas on display.

An edition from which strongly emerged both the will to look ahead and the certainty that a sector capable of expressing so

much quality and innovation - strong in niche companies attentive to extreme quality, as well as groups capable of tackling the largest markets - always has a lot to say,’ concluded Giobbi.

design) to think about the future of professions linked to the world of creativity and furnishing. A strong signal and a promise for the future of one of the strongest furniture districts in Europe.

The last day of SICAM 2024 saw the presence at the fair of more than 300 young people from schools and educational institutes, who accepted the invitation of the Friuli-Venezia Giulia delegation of ADI (Association for industrial

The appointment is now with the sixteenth edition of SICAM, to be held from 14th to 17th October 2025, again in the spaces of the Pordenone Fair. 

Openhouse at Farnese

Running an open house where attendees get to see machinery in operation and are able to interact with staff is becoming more the in thing to do these days.

The latest is from machinery supplier Farnese NZ Ltd at their showroom in the Auckland suburb of Ellerslie. They had on display and in operation a range of machines for attendees to watch and find out more about their operation.

JOINERS Magazine December 2024 page 8

The perfect eggshell finish 576 AMERTHANE

DISTRIBUTORS Whangarei Paint Centre Whangarei (09) 430 2414

Two Pack Acrylic Polyurethane

Wairau Paint Centre Auckland (09) 443 3430 PPG Industries NZ Ltd Auckland (09) 573 1620

• Application friendly • Available in gloss levels 10 - 75%

Grayson Auto Colour Centre Auckland (09) 278 0685

• Very fast drying - comparable to lacquers

Autolink Distributors Ltd Hamilton (07) 846 1443

• Excellent wet and dry heat resistance • Very good mar resistance

Linkup Paints (BOP) Ltd Tauranga (07) 571 8921

• Excellent chemical / solvent resistance • Available in a wide range of the latest fashionable colours

Complete Paints Ltd Napier (06) 843 1122

USES: Amerthane 576 is designed as a high quality finish for kitchens, shop fittings, cabinets, desks, panelling, partitions and most interior wood and metal work.

Total Paint Supplies Ltd New Plymouth (06) 769 9415 Total Body Shop Ltd Wellington (04) 586 6681 Paintco Nelson (03) 546 6660

For more Information please contact PPG

PPG Industries NZ Ltd Christchurch (03) 384 0255 Rainbow Paints Ltd Dunedin (03) 474 0659 Southern Paints Invercargill (03) 218 4664

PPG Industries NZ Ltd, 5 Monahan Rd, Mt Wellington, Auckland Freephone 0800 990 093 • Freefax 0800 659 377 • www.ppgic.co.nz

JOINERS Magazine December 2024 page 9

Competenz appointments Laminex New Zealand™

update

Hi everyone, It’s hard to believe Christmas is nearly upon us. I’m always the first to put up the tree in our family, despite the grinches grizzling at my enthusiasm. I enjoy the positive mindset shift it brings, with a symbol of sunny days and holidays. It’s also crazy to think it’s been nearly eight months since my return to Laminex. Where has this year gone! In September, I attended my first Master Joiners Conference. I had a great time meeting new people and attending the awards evening – there was such a high calibre of entries, congratulations to all the winners! The theme of the conference ‘Crafting the Future’ really resonated with our business’ focus.

In the last few months, as we’ve been reflecting on how we can refine and craft our recipe for success, we’ve taken the time to review our operating model to ensure it aligns with our focus on our core business and optimises the customer experience. One of the key area’s we are honing in on is network optimisation. With a drive to ‘get it right the first time’, we want to minimise rework, strive to have core product in stock all day, every day, and enhance our online experience; for example ‘Forward ordering’ on our eCommerce platform.

With a clear focus on operational excellence, we have made the decision to establish a dedicated role for a National Manufacturing Manager. With laminated and engineered wood panels being a critical part of our core business, this role will oversee and drive business improvement across our Hamilton and Taupo plants; we’re very excited to have appointed Neil Ross to the role. He is no stranger to the business, some of you may remember the name, having worked at different Laminex sites in the past, such as Kumeu, Taupo and Hamilton, and more recently as a Project Manager for our Taupo plant upgrade. Neil will start in the new year.

On the back of our Melteca plant reaching 40 years last year, we’ve achieved another impressive milestone. Our Taupo superfine plant is celebrating 50 years; the first board running off the line in December 1974. We wouldn’t be able to reach this milestone without the support of all our customers that purchase particle board - Thank you for choosing us as your partner.

As we head into Christmas, our team will be taking a break over the holidays, you can find our operating hours at laminex.co.nz/holiday-hours. We understand how tough the market has been this year, so from me personally and on behalf of our team, thank you for supporting Laminex. I wish you and your family a safe and revitalising break over Christmas and the New Year, with a positive 2025.

Rachel Silcock General Manager Laminex New Zealand

JOINERS Magazine December 2024 page 10

Diane Lithgow

Murray Newman

General Manager, Strategic Engagement

General Manager, Corporate Services

Training organisation Competenz, has appointed Diane Lithgow as its General Manager of Strategic Engagement. Lithgow will oversee the strategic operations of Competenz’s work-based training partnerships, supporting apprenticeship training for learners and employers in 36 sectors.

Competenz is pleased to announce the appointment of Murray Newman as General Manager, Corporate Services. With a rich background in finance and corporate governance, Murray brings over 20 years of executive experience across diverse industries, most recently in senior roles at NTT NZ Limited and Intergen, where he held positions as CFO and General Manager, Corporate Services.

Ms Lithgow has held senior roles in education for the past twenty years. Most recently, she was National Ako Network Director: Services of Te Pūkenga.

Her new role will focus on the organisation’s operations and industry training strategies, looking for opportunities for continuous improvement while leveraging the existing capability within each sector.

Ms Lithgow says her priority is to understand the industry’s appetite for change in these more volatile times while assuring employers that work-based training will continue to lift their workforce capability and success into the next phase of their business.

“Looking up and looking forward is our focus for 2025.

Underscoring everything we do is delivering training that improves productivity for every business, ensuring our employers are ready for the future of work and that our learners are living a life with purpose,” she said. 

In his new role, Murray will lead Competenz’s corporate services teams, leveraging his financial acumen and deep expertise in building strategy and organisational culture. Murray’s key priorities in the first 100 days include implementing a technology roadmap and getting hands-on insights by joining training advisors in the field. He acknowledges that the sector faces uncertainty due to pending government announcements, but he’s focused on preparing Competenz for future growth and resilience.

"Competenz is full of people passionate about our learners' outcomes. I’m excited to transition into the work-based learning industry, building relationships across the organisation and supporting Kiwis as they work toward their trades." 

It’s so easy to stay connected.

I just ring toll-free 0800 HOMAG1 0800 HOMAG1 — the easiest way to stay connected!

We value our relationship with our customers and strive to make your experience with us as smooth as possible. Whether you need assistance with ordering spare parts, seeking technical guidance, or discussing your woodworking requirements, our friendly and knowledgeable team is just a phone call away.

www.homag.com | sales-australia@homag.com | Toll free 0800 HOMAG1

YOUR SOLUTION JOINERS Magazine December 2024 page 11

Jack, John, Richard and James Carroll.

Carroll's Joinery in Masterton celebrate 40 years in business

JacksTech 2024 a showcase of innovation In mid-August, the Jacks Auckland showroom was alive with energy as ‘JacksTech 2024’ kicked off. In the absence of AWISA, JacksTech stepped up, offering the woodworking industry a prime opportunity to explore cutting-edge technology through interactive, hands-on demonstrations.

The event provided a fantastic platform for industry professionals to experience the latest advancements in machinery, hardware, software, and consumables. Alongside the impressive range of machines on display, a host of industry experts were present, sharing insights and showcasing their products.

Representatives from Cabinet Vision, Microvellum, Mozaik, and Pro100 were in attendance, while well-known brands like Blum, Enko, Hutchco, Rehau, Ducts R Us, Kantek, and Robinson & Sinclair also participated, offering valuable information and demonstrating their latest innovations.

A standout at the event was Gaston from Piranha Tools, who brought a superb range of carpentry and fine woodworking tools - many of which sold during the show.

One of the main highlights of JacksTech 2024 was the official launch of Jacks’ new KDT range which is quickly redefining value for Kiwi manufacturers.

This included state-of-the-art laser-

JOINERS Magazine December 2024 page 12

Designed and made in Masterton, since 1984, but the joinery journey didn't start there!

edgebanding technology, featuring a genuine laser that requires no start-up time and forms an unmatched bond between tape and board. Demonstrations of KDT’s affordable CNC nesting lines generated significant interest, while their latest 6-sided drilling and routing machine had manufacturers reconsidering traditional cabinet assembly methods.

The discussions around new assembly solutions also introduced the Peanut fixing system from Intelligent Fixings (IF). With IF’s Sales Manager flying in from London and showcasing the latest in automatic Peanut drilling and insertion technology from Omal, attendees quickly recognised the efficiency and simplicity of this innovative solution.

Simon Hornby, Jacks Sales Manager reflected on the event’s success: "The turnout at JacksTech 2024 was outstanding. Even in a slightly softer market our customers are keen to see the latest industry innovations, especially how automation can boost productivity and reduce manufacturing costs. The quality and affordability of our KDT range blew them away. KDT is quickly redefining the cost expectations of automated solutions for Kiwi manufacturers. We’re very happy with the interest and sales the show generated." 

As John Carroll celebrates his 80th birthday the Carroll's Joinery team celebrate 40 years in business. From apprentice to master craftsman, John built the business gradually over the decades always putting staff, clients, and topquality work first. His son Richard Carroll has run the business since 2005 and now grandson James is completing his joinery apprenticeship.

The result is thousands of beautifully built kitchens, doors, windows, and other timber pieces being enjoyed by families all through the Wairarapa and Wellington regions.

Still based at the original location - 143 Lincoln Road, Masterton (Cattle stop and all) the new showroom showcases the latest in trends and technology with an ever-expanding machine collection in the factory. 40 years could not be achieved alone, a big thank you to all of our supply partners and industry associates for their support over the years.

Looking ahead? We have had some legendary apprentices and qualifying designers, bringing on and encouraging more young talent to make the cabinet-making industry their vocation is a tradition we want to continue.

For more contact Richard Carroll 06 377 3160 www.carrollsjoinery.co.nz

JOINERS Magazine December 2024 page 13

Shaping the future of joinery at the Master Joiners Conference 2024

Leveraging

expertise & innovation The Master Joiners Crafting the Future Conference 2024 attracted leading experts from the joinery industry, highlighting the vital contributions of subject matter experts, suppliers, and sponsors. Having a clear direction is essential as we navigate the future with confidence. Speaker sessions provided timely content this year, and exhibitors provided professional expertise.

The conference featured exhibitors from across the industry, and it was a one-stop shop for delegates! Egmont Air and Airtight Solutions showcased clean-air technologies for better workshop environments. At the same time, Seearco promoted dust-free sanding solutions with the Mirka and Abranet systems, emphasizing safety and efficiency.

Design2CAM showcased its newly released PRO100 Version 7, while HP Tech introduced innovative edge banding

technologies. ITI NZ, formerly known as ITI Timspec, reaffirmed its commitment to its roots and to being a long-term partner in the joinery industry in New Zealand.

Enko presented premium Italianmade hardware that combines functionality and elegance, and Abodo displayed a range of timber solutions along with installation options.

Sponsors played a significant role in enhancing the conference experience by providing opportunities for learning and networking. BCITO, as the Joinery Tour Sponsor, accompanied delegates on visits to Ryan's Kitchens and the Ara Institute training campus. Laminex sponsored the Friday Trackside function and the Best Kitchen Under $30K award. They also introduced 13 new decors to their Melteca range and selected two winners from the mobile gate ride prize draw.

Meanwhile, Biesse, the sponsor of the Supreme Award, showcased its groundbreaking Hyfuse Laser

JOINERS Magazine December 2024 page 14

Sponsors played a significant role in enhancing the conference experience by providing opportunities for learning and networking.

Tape Technology, designed for seamless edgebanding. Joinery IT showcased Cabinet Vision and Vortek Spaces software and sponsored the break-out session presented by the Waihanga Ara Rau on the new Joinery Detailing Qualification. Nelson Pine, sponsor for The Gathering, highlighted the incredible versatility of GoldenEdge MDF. Blum, who sponsored the Best Kitchen Design Award, demonstrated their innovative REVEGO pocket door system.

Exhibitors like Jacks offered showroom tours, while Reward Hospitality celebrated five years of their durable PVD sink collection.

Machines R Us showcased SCM's safety-enhancing Blade Off system. Additionally, FIT NZ introduced their slim wall soft-close drawer and networked with delegates as a sponsor of the escape room challenge!

Environmental sustainability and modern functionality were key focuses for many exhibitors.

Thermawood showcased retrofitting solutions for timber double glazing, while Archant presented Kleenstone™, a sustainable solid surface composed of 85% recycled glass. Hettich displayed the latest FurnSpin, a practical revolving storage solution, and sponsored the Best Region Awards and relaxing beverage tours.

Unique Hardware showcased Zebratti hardware for timber doors and windows. At the same time, Wurth emphasized innovative inventory storage solutions for screws, and sealants (we love an organized workspace!). Allegion sponsored the Best Timber Project award this year and displayed a

range of products for locking and latching, as well as the weatherfold bi-fold system.

operations. Homag was on point with the coffee cart sponsorship and some great machinery options.

Creative Lighting Award and Saturday Adventure sponsor Hafele enriched the exhibition with the HAWA Concepta III pocket door system and joined delegates in biking and ziplining.

Delegates also met John who introduced Innergy, aERP solution for business new to the Master Joiners exhibition.

The Master Joiners Conference 2024 successfully brought the industry together under one roof, fostering collaboration and sparking creativity. Sharing knowledge and building connections is essential for advancing professional joinery practices in a modern business environment. Taking the time to unwind and network is beneficial when you need to converse, share a drink, and meet people who understand the industry.

NZ Panels partnered with Master Joiners to promote excellence by sponsoring the Annual Excellence Awards Dinner at Christ's College in Christchurch. Just as joinery products are recognized for their quality, Master Joiners expresses gratitude to NZ Panels for their continued commitment to this principle of excellence.

Additionally, Simply Resolutions provided invaluable resources for complaint management, helping businesses enhance their

This year's conference served as a powerful reminder of the importance of leveraging expertise, innovation, partnership, and manufacturing to shape the future of joinery. 

JOINERS J OIINER O NE ER E RS Ma Magazine aga gazziine ne De December Dec eccemb ber er 2024 20 20 202 024 page page g 15 15

Master Joiners Conference

The awards dinner took place in Christ’s College’s Grand Hall.

A great event in challenging times T

his year’s Conference was held in Christchurch, a city I had not been in for quite some time. It has very much changed since the traumatic earthquakes of 2010, 2011 and the later so called Valentines Day quake in 2016. I arrived the day before the Conference started on the 25th and had an afternoon walk around the CBD with a good mate of mine Bruce Delaney from Wintec.

An eye opener. Although lots of buildings are gone there is a real sense of regeneration and new beauty about the place. A fitting place for this year’s Conference For those who wanted to there was a trip to the Ara Campus and local firm Ryans Kitchens & Joinery on the first day of the Conference proper followed by a discussion session at the Conference venue at the Addington Events Centre, a part of the Addington Racecourse.

A kind of catchup time on what has happened in the joinery industry in the last year. As always, the following Happy Hour and the mix and mingle The Gathering was warmly attended by Master Joiner members and sponsors alike. A great location overlooking the race track.

The Conference proper started on the Friday with an introduction from Nathan Busch the Master Joiners President, followed by Keynote speaker The Joinery Coach Bruce Poling.

Following this were sessions on construction contracts, the latest on compliant timber joinery and an interesting session about wood dust in the workplace and a current move afoot from the Wood Processors & Manufacturers Association (WMPA) advocating for a change in the way Worksafe set Worker Exposure Standards (WES).

The breakout sessions in the afternoon were well attended.

There was a look at the NZ Diploma in Joinery Detailing and skill standards, A Joinery Coach demonstration and a look at the range of low e glass options from Architectural Glass Products out of Cambridge, a huge site some four football fields long. This all culminated in the Friday night Trackside with Master Joiners for an evening of food, drink and betting on the trotters. A good night had by all but little money won I suspect.

JOINERS Magazine December 2024 page 16

Michael Bangs, Dave Cunningham, Andrew Reilly and Ian Featherston (in background), waiting to sample beers at Wigram Brewery.

The final day kicked off with an inspirational story from Arna Ward who went from hairdressing to joinery manufacturing. A great story to keep you positive.

The rest of the day was taken up with various activities people could choose from. My choice (as always!) was the Canterbury craft beer and gin tour where we ended up at the Wigram Brewery and learnt about (and drank) some really good local craft beer.

There were tours to W & R Jack’s Christchurch showroom, Zipline and mountain biking for the more adventurous and an Escape Rooms challenge for the more cerebral.

Finally, there came the Master Joiners Awards evening held in the fabulous Christ’s College main hall. Congrats to all the winners (and there were a lot of them) with special note to the newly created Premier Award won by Cube Dentro and the Supreme Award winner Grandvue Joinery.

We have features on both these businesses in this issue.

I would also like to make a special mention of the Master Joiners Apprentice Awards sponsored by Ara and JOINERS Magazine, a set of awards the magazine has consistently supported for some 29 years on the trot. Without these wonderful apprentices there would be no industry. Last but not least a big thank you to the Master Joiners team who organised the event and for all the many sponsors without which this all wouldn’t happen.

Bob Nordgren

Resene AquaLAQ

Water Based Paint Licence No 1296003

TM

Waterborne low VOC coating system for cabinetry, joinery, shop fittings, kitchens and doors

• Economical • Hard and Durable • Waterborne 1K System • Authentic Resene colours

AquaLAQ is waterbased, low VOC, low odour and Environmental Choice approved.

Better for your business and better for your customers.

Call 0800 108 008 or email help@reseneauto.co.nz to become a trained and registered applicator | reseneauto.co.nz/aqualaq JOINERS Magazine December 2024 page 17

Supreme Award 2024 Sponsored by Biesse Won by Grandvue Joinery

Necessity’s the mother of invention This year’s Supreme Award winning entry was the result of the need to solve a design problem. Bob Nordgren from JOINERS Magazine caught up with Robert Piacun, owner of Grandvue Joinery at his delightful home adjacent to his factory in Swanson, Auckland after the Award announcement who explained it in more detail.

“The three level house had already been largely built when it was found the Western Red Cedar shutters that were to be a feature of the new build were to be fitted with standard bifold fitments that simply could not handle the job, particularly the size and weight of each shutter. This meant a complete redesign to get back on track with the original intention.” explained Robert. “These shutters were big (1445 wide by 2850 high with 90mm by 44mm vertical Cedar blades) and had been intended to run to the top of the house outside the building line.”

Luckily, after some serious measuring up it became apparent that suspending the shutters from the steel portals already installed as part of the main structure provided part of the solution to meet the original concept. The key lay in the design of hinges that would carry the calculated weight of each two shutter bifold of about 170kg. Robert explained “We tried a number of designs before settling on a fully adjustable hinge which was easy to machine and could carry the weight of each set of shutters.”

The design detail of this fully adjustable hinge system and IP is copyright to Grandvue Joinery and was checked by an engineer and a PS1 Certificate issued with no design change.

“Masterful joinery skills required here” “aesthetically pleasing to view with a high degree of difficulty” “impressed with the joinery meeting all standards that were required” “creativity with the use of the hinge bi-folding system” Judges comments Each set of shutters weighs around 170 kg.

Robert Piacun.

The hinge is made from 316 stainless steel 90mm by 8mm steel rails which cantilever off the hinge gudgeon pin and are hidden within laminated Rosewood timber rails which are glued up so the glue lines are on the edges of the timber so they appear as a solid timber rail. Each of the vertical Western Red Cedar shutter blades is glue linked to a dowel which runs from the back section of the Rosewood rail through a hole in the hidden stainless steel rail and through to the front section of the Rosewood rail and onto the blade. This connects all timber pieces glued with Resorsinol glue.

JOINERS Magazine December 2024 page 18

“The key is the leading edge has a projecting guide roller, running in a track, which has no shutter load upon it as all the loads are taken on the stainless steel hinge pins and solid cantilever rials.” points out Robert. The design was drawn in 2D and 3D Autocad so accuracy was spot on for timber machining and steel component manufacturing. Robert says “It was a real pleasure to do this job and gave me a real sense of achieving the client’s original intention as well as creating a robust, fully adjustable shutter system that could be used in a range of challenging situations.”

Robert has been around since he set up shop back in 1984.

Grandvue Joinery is well known for its bespoke wood projects.

“There is nothing like the feel and look of hand worked wood.

It has kept me in this business all these years” Robert recalls.

This Award winning project found in the Auckland suburb of Remuera, was in fact started back in 2019 and completed during 2020. House joinery has been their speciality. “Thanks must go

to my staff members Ravi Shama who is now in Australia, Eben Willschutt, our draughtsman Tony Rule who assisted in the CAD drafting /3D modelling in which so many drawings for the whole project were required and my son Keiran who all contributed to this project.”

For more information contact Robert Piacun at Grandvue Joinery, 42 Gregory Rd, Waitakere, Auckland ph 021 150 5993, email: grandvue. joinery@gmail.com or visit www. grandvuejoinery.co.nz

About the Supreme Award T h e S u p r e m e Aw a r d recognises timber as the material for joinery products.

Winning entries from all the other timber categories are entered in the Supreme Award category

JOINERS Magazine December 2024 page 19

Premier Award 2024 Sponsored by Carters Won by Cube Dentro

Tradition meets innovation The inaugural Premier Award winner was Auckland based Cube Dentro Ltd who designed, manufactured and installed a stunning kitchen where tradition meets innovation in a very practical and well thought out way. Bob Nordgren from JOINERS Magazine spoke with Leonie Hamill who was the lead designer for this project and who along with her husband Brendon own and operate their interior design studio and factory site located in the Auckland suburb of Takanini.

“The client in this case were an intergenerational Indian family with parents, two children and grandparents” comments Leonie “Meeting the cultural aspects of traditional Indian culture and cuisine provided the challenge for me as lead designer and the team, of their kitchen and scullery which needed to reflect how the mother and grandmother liked to operate: a rear zone used for food preparation and the front for showcasing and serving cuisine.”

Being a desired multi functional space on one floor in what is a large four floor home, meant providing specific zones within this particular floor was a simple effective technique: the rear zone (D) is used for food prep and the front (A) for showcasing and serving food. At the same time while mother and grandmother worked behind the hob wall (D) the kids could do their homework at the large island on the other side of the central island (B). A crucial design aspect was the need for a well organised storage system for spices, grains and utensils in a designated area that kept it uncluttered and practical (C).

The large island (B) doubled for relaxed family mealtimes.

About Cube Dentro

Leonie Hamill & Stephen Bracefield with awards for Best Region; Best Kitchen over 50K; Best Kitchen Design by an In House Team & the Premier Award.

So much for the layout practicalities. This kitchen has so much more upon closer examination. I asked Leonie what was technically the most challenging part of the project.

“Undoubtedly the innovative curved corners on the cabinetry created by our cabinetmaker Stephen Bracefield. A unique design element, the radius precision needed to be spot on so that it matched the curves on all the corners in the kitchen, a difficult task. All the veneer in American Oak was hand cut rather than machine cut.” Leonie explains.

The dark Oak, matte finished veneer contrasts with the light stone and fully integrated appliances creating a contemporary design.

The Dekton benchtops offer durability and resistance to stains and scratches while the wow factor comes with the recessed handles in aged brass. The whole area is not just about cooking, it’s also about entertaining which is where the large island dining table with its bespoke legs doubles as a standout for entertaining guests.

JOINERS Magazine December 2024 page 20

Strip lighting has been used to define the separate workspaces and highlighting the stone and wood grain patterns with this being repeated throughout the kitchen for cohesion. The matte finish on the cabinetry keeps it smudge free and easy to clean. Although the gas hobs are not heavily used, the generous benchtop space remains really practical.

“A couple of niceties come with the vertical timber veneer panels to complement the wider interior design” comments Leonie “ while natural light and ventilation is achieved by using a skylight. A ‘walk behind’ room created the functionality of a separate scullery (B) while keeping the layout sleek.

Variety is the spice of life in this innovative kitchen.

For more information contact Cube Dentro located at 8 Tironui Station Rd West, Takanini, Auckland, Ph. 09 297 7830, email leonie@dentro.co.nz or visit www.cubedentro.co.nz

Leonie and her husband Brendon took over the business in 2019. Formerly called Cube 3 Cabinetry, it had been renamed Cube Dentro (dentro being Italian for ‘interiors’) with their manufacture and install on the ground floor and design studio on the second floor.

To reflect their penchant for design their name will soon be relaunched as just Dentro.

Their mainstay is high end, full house lots be it in the home or commercial where both Leonie and her design team (Alina Cuchiliuc and Jordana Gurney along with Kitchen Detailer Dan Just) and their production team of ten in their 600 square metre factory run by Brendon make it all happen. All their projects are bespoke and they have won an impressive number of local and international awards over the years.

About the Premier Award The Premier Award, a new award introduced this year, recognises cabinet joinery products where entries are projects made to Master Joiners standards that showcase justified elements, techniques, trends, solutions and lifestyle factors with sustainability elements such as re-use of space, materials and/or adaptation for lifestyle change.

“the design thoughtfully accommodates various uses, blending functionality with style”

B

C

A D

“the choice of dark stained crown cut veneer, detailed panels, elegantly curved edges and contrasting Dekton benchtops and splashbacks enhances the overall aesthetic adding a refined, contemporary touch” “the smart integration and zoning of appliances positioned between two defines work areas, make excellent use of space and enhances functionality” “designed for all ages, the layout includes lower cabinets, pull out drawers and wider aisles for easy movement making it accessible for both younger and older family members” “celebrates the essence of shared, traditional cooking with a modern twist.”

Judge’s comments

JOINERS Magazine December 2024 page 21

Kitchens, Cabinets & Timber

Best Kitchen over $50K & Best Kitchen Design by In-House Design Team - Cube Dentro, Auckland

Best Kitchen $30-50K - Ryan’s Kitchens, Christchurch.

Best Kitchen under $30K - Nigel Molloy Joinery, Napier.

Best Cabinetry Project - Modex Joinery, Taranaki.

Category sponsors: Best Kitchen over $50k - Hafele; Best Kitchen $30-50k - Laminex NZ; Best Kitchen Under $30k - Laminex NZ; Best page Kitchen JOINERS Magazine December 2024 22 Design by In-House Team - Blum; Best Cabinetry Project - Blum.

Category Winners

Best Speciality - MWF Manufacturing, Christchurch.

Best Stairs - Artisan Carpentry, Te Puke.

Best Door or Window; Best Creative Use of Timber & Best Timber Project - Grandvue Joinery, Auckland

Best Use of Colour - Well Hung Joinery, Wellington

Best Use of Creative Lighting - Cooper Webley, Nelson

Best Speciality - Halswell Timber; Best Stairs - Biesse; Best Door or Window - Thermawood; Best Creative Use of Timber - Halswell Timber; Best Timber Project - Allegion; Best Use of Colour - Resene; Best Use of Creative Lighting - Hafele.

JOINERS Magazine December 2024 page 23

Regional Award winners

Nelson / Marlborough - Cooper Webley, Nelson

Canterbury - Modern Age Kitchens, Christchurch

Hawkes Bay / Poverty Bay - Burley Kitchens, Napier

Otago / Southland - Leith Joinery, Dunedin

Central - Mastercraft Kitchens by Healey, Palmerston North

Wellington - Craftbuilt Industries, Levin

Waitaki - LJT Joinery, Timaru

Taranaki - Mode Kitchens, New Plymouth

Waikato / BOP - Graft Joinery, Taupo

JOINERS Magazine December 2024 page 24

Auckland - Cube Dentro, Auckland

The Master Joiners Regional Awards are sponsored by Hettich

Our customers’ success is one of our driving forces.

This not only calls for close partnerships, but solutions and services that provide cost efficiency.

Let’s move forward and, together, embark on a journey of even greater success.

See what we’re all about designwithhettich.co.nz/trade hettich.com JOINERS Magazine December 2024 page 25

Apprentice Awards Best Timber Project Over Two Years & Highest Judged For Workmanship & Skill Blake Evans Lee Brothers Rotorura

Best Fitment Over Two Years Ricky Fry Bays Joinery Nelson

Best Fitment Under Two Years James Stokes, Well Hung Joinery, Wellington

Best Timber Project Under Two Years Te Maia Andrews-Bradnock, Lee Brothers, Rotorua The Master Joiners Apprentice Awards are sponsored by Ara Institute of Canterbury & JOINERS Magazine JOINERS Magazine December 2024 page 26

... peoples choice

Peoples Choice Winner, Under 2 Years, Darian Shaw, Woodland Shopfitting, Auckland. Pictured with Philip Aldridge, CE Waihanga Ara Rau, Workforce Development Council.

Peoples Choice Winner, Over 2 Years, Blake Evans, Lee Brothers Joinery, Rotorua. Pictured with Philip Aldridge, CE Waihanga Ara Rau, Workforce Development Council.

Gordon Caulfield Memorial Award to the employer of the Highest Judged Apprentice for Workmanship and Skill. Andrew Gibb, Lee Brothers Joinery, Rotorua. Pictured with Nathan Busch (left), National President, Master Joiners

Ken Monk Award Recipient for contributions to industry, Andrew Bellamy, Wood Solutions, Dunedin. Pictured with Nathan Busch (right), National President, Master Joiners JOINERS Magazine December 2024 page 27

Handles pulls. knobs. recessed

H2155

H2305

H2135 BLANCO Subline sink in Volcano Grey

BLANCO Subline sink in Volcano Grey

H2320 H2315

Hafele p.31

From highly visible to practically hidden, door and drawer handles define the look and feel of the room. We present a selection from several leading suppliers of traditional, modern and contemporary options to assist in making this timeless decision.

FIT p.32

JOINERS Magazine December 2024 page 28

Katalog p.33

Enko p.29

FIT p.32

new handle collection from Metakor in Belgium At Enko Group, we understand that the right cabinet hardware can transform a living space. Our latest collection of handles combines cutting-edge design, exceptional craftsmanship, and timeless appeal. These handles are more than functional—they are design statements that elevate any space.

HEXAGON Modern sophistication Designed by Belgian visionary Walter Muys, the Hexagon handle brings geometric elegance to your cabinetry. Its hexagonal form, softened at the edges, balances boldness and approachability.

Perfect for modern and traditional kitchens alike, Hexagon handles add a sophisticated yet playful touch.

Design Tip: Pair Hexagon handles with contrasting finishes, such as matte black on natural wood, for a striking effect.

BOHO & TOUQUET Texture & warmth The Boho and Touquet handles, from Belgian studio Blackbirds, embrace the popular ribbed texture trend. Their fluted design introduces depth and warmth, creating tactile interest that enhances the character of any cabinetry. Style Insight: Use these handles to add subtle texture or as a contrast to smooth cabinet fronts.

TAZZA - Bold & functional The Tazza knob combines bold design with ergonomic practicality.

Inspired by the Italian word for “cup,” Tazza’s unique shape offers a comfortable grip, making it ideal for appliance doors or heavy drawers.

It’s the perfect blend of function and style. Creative Idea: Position Tazza knobs on integrated appliances to create a cohesive, standout look.

WABI SABI Embracing imperfection The Wabi Sabi collection celebrates the beauty of imperfection. Featuring the Waltzy and Stone handles, this collection emphasizes raw materials and handcrafted designs.

Waltzy: Hand-molded in clay, Waltzy handles exude artisanal charm and are ideal for kitchens with a rustic or natural aesthetic.

Stone: Inspired by organic forms, Stone handles bring a Scandinavian touch to cabinetry. Their versatile design allows for creative, custom mounting.

Pro Tip: Mix and match Waltzy and Stone handles to add character and individuality to your space.

Why choose Metakor handles from Enko Group?

1. Innovative Design: Handles crafted by renowned designers.

2. Quality Craftsmanship: Built to last and enhance your cabinetry.

3. Versatile Styles: From modern to organic, there’s a design for every taste.

Discover Enko Group’s new collection and bring your vision to life.



HANDLES FOR HANDS Add texture and sophistication to your projects with Metakor’s new handle collection, expertly crafted in Belgium.

Scan to view all handles

1 2

5 3

4

1. No 266 Hexagon 2. No 265 Boho

6

3. No 264 Touquet 4. No 267 Tazza

5. No 268 Stone 6. No 269 Waltzy

ENKO.NZ

sales@enko.nz JOINERS Magazine December 2024 page 29

Häfele Decorative Hardware.

Decorative Hardware from Häfele features high quality finishes, contemporary sillhouettes and a range of styles from an iconic bold, modern look, right through to vintage antique and everything in between.

H2135

H23 H2 23 320 20 H2320

H2345

H2315

H2155

H2305

H2345

H2315

H2135

H2320

BLANCO Subline sink in Soft White

JOINERS Magazine December 2024 page 30

H2155

H2305

H2135 BLANCO Subline sink in Volcano Grey

BLANCO Subline sink in Volcano Grey

H2320 H2315

H2155

BLANCO Subline sink in Tartufo

H2320

H19 19 930 0 H1930

H1930 H19 930 BLANCO Subline sink in Tartufo

BLANCO Subline sink in Coffee

THE LATEST HUES. An impressively resilient, easycare surface Now available in four new finishes.

sales@hafele.co.nz 0800 442 334 www.hafele.co.nz JOINERS Magazine December 2024 page 31

Barolo Tazza

Anglo

Gaziano Otto

Italian handles to fit the space and look of your next project All of the FIT range of handles come from Citterio Giulio, a family-owned business in Brianza, Italy

Pietra

Angolo Solid 90° cabinet pull with a strong, simple line suitable for contemporary kitchens.

Barolo Tazza Cup handle and cylindrical knob in traditional shapes but with a very modern twist. D handles and tapered knobs also available.

Gaziano Otto Similar to our slender Gaziano range of D handles and knobs, with the addition of a circular base with octagonal feature to give a slightly more traditional feel without sacrificing slender elegance.

Spada

JOINERS Magazine December 2024 page 32

Pietra D handle featuring a lovely angle and charming texture, just like the Ponte Petra, the oldest bridge in Verona, for which this handle range is named.

Spada An elegantly streamlined pull available in two lengths and three colour options; Dull Black, Titanium Bronze and Natural Brass.

For more info about the FIT handle range, check the handles section of FIT’s website or contact your Fit rep, phone 09 431 0025 or email info@fit-nz.co.nz

Contemporary European from Katalog

LIDD

VF0635

LINKK VF0643

HANDLES VIEW THE RANGE AT

www.katalog.co.nz MOON

15c Williamson Ave, Ponsonby, Auckland +64 9 360 4290

VF0662

MOULE VF0650

JOINERS Magazine December 2024 page 33

JOINERS Magazine December 2024 page 34

JOINERS Magazine December 2024 page 35

Door systems

swinging folding sliding

Hettich p.39

The right mechanism for the right place and right space. We look at recent trends in door hardware systems from leading suppliers across New Zealand, all showing strong design in aesthetic appeal, ease of installation and effortless use.

Load bearing capacity up to 25.7 kg with cabinet height of 350 mm

25.7 kg Exedra2 - Smart Model

Blum p.46

JOINERS Magazine December 2024 page 36

FIT p.37

Hafele p.41

QUALITY DOOR SYSTEMS DESIGNED & MADE IN ITALY POCKET DOORS, OVERHEAD LIFTS, FALLING FLAP STAYS, BIFOLD GEAR & A WIDE RANGE OF SOFT CLOSE HINGES FOR ALL JOINERY & CABINETRY NEEDS

Exedra Pocket Door – innovative mechanism that slides door into side of cabinet. Many applications – kitchens, laundries, wardrobes, work stations and more. Highly adjustable and removes easily if needed.

Exedra2 bifolding pocket doors available in 2 models.

EvoLift – a perfect opening and soft closing movement for both single FSI KTQINSL ‫ܫ‬FU ITTW FUUQNHFYNTSX both wood-based and aluminiumframed. Multiple weight classes.

One code ordering makes it easy.

Exedra

Wind Lift – compact yet strong, elegant and unobtrusive, Wind maximises space in overhead cabinets and features smooth, controlled soft closing, even for wide spans. Soft Close. Push to Open.

5 weight classes.

Pacta Falling Flap Door Stay – ideal for creating a fully aligned ‫ܫ‬FY XZWKFHJ TS IJXPX FUUQNFSHJ work stations, table extensions and RTWJ 5FHYF KTW IT\S\FWI ‫ܫ‬FU doors, is simple and stylish with a gradual controlled action and no bulky stays. Soft close. Push to open. Light options.

Bifold Gear – easy assembly, very quiet and just 80mm space lost when open.

Exedra2 - Smart Model EvoLift

Wind

Pacta

Bifold

Photo kindly supplied by Tim Lee at The Offcut of Auckland* (MJHP TZY YMJ KZQQ RNSZYJ [NIJT TK 9NRѣX UWTOJHY KJFYZWNSL 8FQNHJ 5FHYF MNSLJX MJWJ MYYUX ^TZYZ GJ &>-06J] ]/X

FIT’S NEW MAKING YOUR SPACE WORK PROJECT BOOK AVAILABLE NOW (T[JWX +NYѣX 8FQNHJ WFSLJ NSHQZINSL MNSLJX UTHPJY ITTW QNKYX KTW T[JWMJFI FSI KFQQNSL ‫ܫ‬FU ITTWX (TSYFHY ZX YT TWIJW MFWI HTUNJX TW IT\SQTFI KWTR YMJ 7JXTZWHJ )T\SQTFI UFLJ FY \\\ ‫ܪ‬Y S_ HT S_

HEAD OFFICE & WAREHOUSE: Northgate Business Park, 22 Hood St, Wellsford 0900 SHOWROOM BY APPOINTMENT & WAREHOUSE: 4 Morse Rd, Wigram, Christchurch 8042 PHONE 09 431 0025 EMAIL info@fit-nz.co.nz www.fit-nz.co.nz

JOINERS Magazine December 2024 page 37

Open up possibilities Hettich is known for its high-quality, innovative hardware solutions, and their door systems are no exception. These products deliver a seamless blend of aesthetic appeal, ease of installation, and functional efficiency. Explore some of the standout products from the range of sliding, folding, and rotating door systems.

FOLD WingLine Series L (new*) WingLine L is Hettich’s most popular folding door system, specifically designed to save space and provide complete access to cabinet interiors. This makes it perfect for kitchen pantries, closet doors, or narrow spaces where traditional swinging doors may not be feasible. 2024 has been a big year for the classic product, seeing it undergo re-engineering for some big feature upgrades: •

•

• •

Completely redesigned comfort unit, allowing you to precisely adjust the opening tension and speed for complete customisation for the customer A new centre hinge with steel flap fittings, now accommodating adjustments to height and panel gap Smoother, quieter running due to a redesigned track, running component & guide Available in white and anthracite

Wingline Series 230 WingLine 230 takes folding doors to the next level with support for larger, heavier doors in pantry or wardrobe spaces, or as an agile room divider. This system is perfect for high-traffic areas where durability and stability are essential.

•

•

An exceptionally sturdy system where no centre panels or bottom running track required Door heights up to 3000mm

Wing Series 77 Offering freely-moving door sets that can even be interconnected, Wing 77 is the go-to for designers seeking to craft custom-made folding door solutions to fit any space perfectly.

•

The two-wing option enables an opening space of 1000mm, while the four-wing option opens up a huge 1600mm of access • Door heights 1000 - 2400mm Pair all folding door systems with the Sensys hinge.

JOINERS Magazine December 2024 page 38

LATERAL SLIDE SlideLine Series M Ideal for cabinets in living areas, bathrooms, or kitchens, the SlideLine M sliding door system is sleek and minimalistic. With a focus on seamless integration, the SlideLine M is designed to move doors quietly and smoothly, even on small cabinets, and is Hettich’s most popular sliding door system.

• • •

Suitable for all common furniture constructions Door widths from a small 300mm to a large 1800mm Inset and overlay door styles

SysLine Series S Hettich’s SysLine S is an excellent concealed sliding system designed for medium to large cabinet doors.

This entry level system excels in creating smooth, noise-free door movement and is a hidden gem for installers—it offers quick and easy setup and allows adjustment even after the doors are mounted. The built-in dampening mechanism helps prevent abrupt

stops, ensuring that doors glide quietly into place every time. For designers, SysLine S allows a cabinet to look like a monolithic structure, hiding all mechanisms behind closed doors.

• • •

Requires no bottom track, perfect for on-bench applications Accessible price point Suitable for small to medium applications

TopLine Series L For larger wardrobe doors, Hettich’s TopLine L sliding door system provides reliable stability and smooth operation. This toprunning system is specifically designed for larger, heavier doors, making it ideal for bedroom wardrobes or floor-to-ceiling cabinetry in kitchens and living rooms.

• • •

Door heights up to 2600mm 2 and 3 door options Easy to fit soft-closing mechanism, taking just seconds to add after install

Main image opposite page WingLine 230. Top three pics this page Wingline L. Above from left TopLine L; Furnspin S and Vertico Mono.

Lower pic this page Furnspin S.

VERTICAL SLIDE Vertico Series Mono Perfect for multi-shelf units or on-bench applications, the Vertico Mono takes the sliding experience in a different direction.

Practical tips for installing Hettich door systems For the best results, it’s important for joiners to consider the following tips when working with Hettich’s door systems:

• •

1.

Measure Twice, Mount Once: Precision in measuring and aligning mounting brackets will ensure a flawless, functional installation.

2.

Utilize Clip-On and Quick-Fix Mechanisms: Many Hettich systems feature clip-on or quick-fix mounting solutions that speed up the installation process.

Inset application No soft-closing available

HIDE FurnSpin Series S (new**) Hettich’s FurnSpin S system is a true innovation for compact spaces. With its pivoting, rotating movement, it is an ideal solution for creating storage where otherwise there would be none.

This product not only conserves space but also brings a unique, modern touch to cabinetry.

•

• •

Curate the daily living space by either opening FurnSpin for display, or closing for discretion With no corners extending from the cabinet, it opens up space in a whole new way Balanced so carefully that even the lightest objects stay firmly in place

Choosing the right door system for every space When selecting door systems for a kitchen or bathroom project, considering both design intent and functional requirements is essential. Hettich’s range of products provides solutions that cater to various needs—from space-saving mechanisms and soft-closing functionality to concealed sliding options that enhance modern aesthetics.

3.

Prioritize Soft-Close for Client Satisfaction: Silent operation is highly valued in high-end homes, especially in kitchens and bathrooms.

For sales enquiries Our friendly customer service team 0800 438842 | Sales-nz@ hettich.com Or reach out to your sales representative for more information.

Visit www. designwithhettich.co.nz for inspiration and case studies. Visit www. hettich.com for technical information and the Hettich online shop.

* Available in NZ in March 2025 ** Size M and XL coming soon

JOINERS Magazine December 2024 page 39

FREE Flap Fittings.

Overhead cupboard fittings to suit a full range of applications.

Engineered by Häfele.

ENGINEERED BY

FREE Flap

FREE Swing

For cabinet depths of 109mm and above.

Classic flap function with opening angles of 90° and 107° Version 1.7 for flaps up to 450mm height.

Version 3.15 for flaps up to 650mm height.

Less space required above.

Available in two models depending on the weight of the flap.

Push-to-open feature for front panels without handles.

Ideal for flaps with higher fronts.

For cabinet depths of 288mm and above.

For flaps up to 1040mm in height and weighing up to 12.3kg or up to 590mm in height and weighing up to 23.3kg.

Less space required in the room when opening, and little space required above. The handle is reachable at all times.

FREE Fold

FREE Up

Ideal for flaps with higher fronts.

Handle is reachable at all times.

For cabinet depths of 288mm and above.

For flaps up to 1040mm in height and weighing up to 12.3kg or up to 590mm in height and weighing up to 23.3kg.

Hardly any space required in the room to allow for flap opening.

For cabinet depths of 277mm and above.

For flaps up to 600mm in height and weighing up to 14.6kg or up to 420mm in height and weighing up to 19.6kg.

JOINERS Magazine December 2024 page 40

Load bearing capacity up to 25.7 kg with cabinet height of 350 mm

25.7 kg

View the Catalogue Online

FREE Space Free Space is characterised by extremely compact size that goes hand in hand with a refined, minimal design.

This slim, compact design allows for more storage space within the cabinet and shallower depths.

Free Space covers up to 80% of all common stay flap applications.

For flaps up to 650mm in height.

Extremely compact dimensions for cabinets with internal depths from 63mm.

For flaps with or without handle (push opening).

For opening angles of 90º or 107º Adjustment of height, side, tilting angle and holding power possible.

sales@hafele.co.nz 0800 442 334 www.hafele.co.nz JOINERS Magazine December 2024 page 41

Blum's pocket system REVEGO is impressive, innovative and inspirational

discover how it can enhance your next project.

Designed to benefit every user, from the designer to the joiner and homeowner, REVEGO offers a seamless system for planning, installing, opening, and closing cabinetry without compromising the Blum quality you know and love.

Effortless Planning Planning your project with REVEGO is straightforward and intuitive. Thanks to the pocket system's creative engineering, REVEGO allows easy integration into jobs of all different shapes and sizes using Blum's Cabinet Configurator, ensuring you can meet your client's needs without hassle. Ensure that every detail is accounted for with E-SERVICES, making every project smooth and stress-free.

JOINERS Magazine December 2024 page 42

Streamlined Installation The biggest benefit of REVEGO is the time-saving installation process, particularly from the double-door REVEGO duo.

Significantly faster and less complex to install than alternative products, the product is tailored to quick and efficient assembly, reducing time spent on-site and allowing you to move on to your next project faster without needing adjustments later.

Take your cabinetmaking to the next level Experience the ease and efficiency that Blum’s most awaited product brings to your projects and see the difference it will make in your workflow. Embrace the future of cabinetmaking with REVEGO and transform the way you work. Log into E-SERVICES today to plan, configure and order your REVEGO pocket system at e-services.blum.com

Blum's online shop is coming soon

A new and efficient way to order your hardware

Same hinge, different day Change how you envision a space, not how you build it.

Blum is constantly dreaming up new and innovative ways to use products you already know and love, to modernise projects without altering drilling or buying new machinery.

CLIP top BLUMOTION, the unsung hero of modern hinges A standard cranked or inset 110° hinge you probably already have lying around in your workshop becomes a modern, sophisticated inward-opening door that can be installed and adjusted easily. Swap the positions of the hinge and mounting plate to create an inwardopening door.

Stand out or blend in – your choice with onyx black hinges For those projects where you want to make a statement, onyx black hinges are perfect - either stand out as a bold design element or blend in seamlessly with darker cabinetry. It's all about giving you the flexibility to match your creative vision without making planning any different or more difficult.

The onyx black hinge range covers most cabinet applications, so you can keep materials and colours cohesive throughout the job.

Streamline and simplify the way you shop for your hardware needs with Blum's upcoming online shop! Developed for cabinetmakers and modified by cabinetmakers, this new platform promises to make your Blum ordering experience smoother, faster, and more efficient. Here's a first look at what you can expect: Customisable shopping lists Save time by creating and storing personalised shopping lists to reorder your favourite items effortlessly. No more hunting for product codes whenever you need to place an order, focus on what you do best - getting the job done.

Intuitive user interface The online shop is designed to be as simple to navigate as your favourite retail sites, whether you're a tech-savvy pro or just finding your way around. The familiar shopping experience makes finding and ordering Blum products simple and efficient.

Storage saviour The room behind can be used as a hidden pantry or wardrobe, and additional shelving can be concealed behind the cabinet door. Within a kitchen or scullery, the doors open inward, revealing an accessible space without obstructing the room's flow.

For small or large rooms, doors to pantries, or walk-in wardrobes, Blum hinges allow you to reconsider space while enhancing the overall look.

Everyday innovation At the end of the day, it's about delivering top-quality craftsmanship that your clients will love. Blum CLIP top BLUMOTION hinges are the perfect partner in your quest for excellence. Visit www.blum.com to discover the complete range of onyx black hinges, or sign in to e-services. blum.com to configure an inwardopening door for your next job.

Streamlined job management Switch between carts or share them with your colleagues, job management is efficient and collaborative with the new function! Your team can work on multiple projects simultaneously, ensuring everyone stays on the same page.

Effortless product comparison Need to compare products quickly? No worries! Blum's online shop lets you compare up to six products side by side. This feature helps you make informed decisions quickly, ensuring you find the correct product for your project without hassle.

Real-time stock availability Know if it's available straight away with real-time stock availability. You'll know if an item is in stock, running low, or available on backorder for future delivery, giving you peace of mind for any lead times or urgencies.

Blum's online shop is set to transform your Blum ordering experience, making it more convenient and tailored to your needs. Keep an eye out for more details next year, and discover a new way to shop designed just for you, the joiner. Talk to your Blum Account Manager to find out how you can become one of the first users after the summer break,or follow us on Instagram and Facebook @blumnewzealand for your daily dose of storage solutions.

 JOINERS Magazine December 2024 page 43

%OXP RQOLQH VKRS

1 2 2 6

* 1 , 0 2 &

7KH ZRUOG RI ILWWLQJV DW P\ ILQJHUWLSV

&XVWRPLVDEOH VKRSSLQJ OLVWV 6DYH WLPH E\ FUHDWLQJ DQG VWRULQJ SHUVRQDOLVHG VKRSSLQJ OLVWV IRU HIIRUWOHVV UHRUGHULQJ VR \RX FDQ IRFXV RQ JHWWLQJ WKH MRE GRQH

6WUHDPOLQHG MRE

PDQDJHPHQW

6LPSOLI\ \RXU ZRUNIORZ E\ HDVLO\ VZLWFKLQJ EHWZHHQ FDUWV RU VKDULQJ WKHP ZLWK FROOHDJXHV PDNLQJ MRE PDQDJHPHQW PRUH HIILFLHQW DQG FROODERUDWLYH

JOINERS Magazine December 2024 page 44

,QWXLWLYH XVHU U LQWHUIDFH (QMR\ D VHDPOHVV DQG IDPLOLDU RQOLQH VKRSSLQJ H[SHULHQFH GHVLJQHG WR EH DV VLPSOH WR QDYLJDWH DV PRVW SRSXODU UHWDLO VKRSV

(IIRUWOHVV

SURGXFW FRPSDULVRQ ,QVWDQWO\ FRPSDUH XS WR SURGXFWV VLGH E\ VLGH KHOSLQJ \RX PDNH TXLFN DQG LQIRUPHG GHFLVLRQV WR ILQG WKH SHUIHFW SURGXFW IRU \RXU QHHGV

5HDO WLPH VWRFN

DYDLODELOLW\ .QRZ ZKHQ LWHPV DUH LQ VWRFN UXQQLQJ ORZ RU DYDLODEOH IRU IXWXUH GHOLYHU\ JLYLQJ \RX SHDFH RI PLQG DQG HOLPLQDWLQJ XQFHUWDLQW\

JOINERS Magazine December 2024 page 45

An HK for every cabinet Whether your cabinet is wide or narrow, deep, handleless, designer, or shallow, the AVENTOS HK range has the perfect solution for your project. With various lifts available, these AVENTOS flap lift stays are easy to plan, specify, and install for cupboard doors. Let’s break down the range: VENTOS HKi - The new guy in town AVENTOS HKi is the integrated lift system for the most premium and elite jobs. The entire lift mechanism inserts directly into the cabinet side, even using a standard 16 mm panel. Enter your cabinet details into the Cabinet Configurator on E-SERVICES to determine your mechanism size and drilling options, and place an order in just a few clicks. With onyx black arms, AVENTOS HKi is perfect for fitting in or standing out, and because you can’t see any hardware when the door is shut, HKi is the ideal solution for glass fronts.

AVENTOS HK top - Tried and trusted As the first of the AVENTOS ‘top’ family to be released, many cabbies have forgotten what AVENTOS HK was like before it was optimised back in 2020 to become HK top. Available in three motion technologies: BLUMOTION soft close, TIPON for handleless mechanical opening, and SERVO-DRIVE electrical opening and closing, this tried and trusted lift system perfects almost every cabinet.

Adjustments are simple too whether you need to adjust the tilt of your door or restrict the opening angle, all you need is a screwdriver.

JOINERS Magazine December 2024 page 46

AVENTOS HK-XS - Small but mighty The most understated product in the HK range, AVENTOS HK-XS, has an incredible scope of use.

HK-XS requires just 100 mm of cabinet depth, making it perfect for spaces such as above the vanity or over the fridge.

This cost-effective option uses Blum CLIP top hinges as support and can be built with soft closing BLUMOTION or push-to-open TIP-ON. Even the smallest HK in the range has received awards for innovation and design.

One lift system for every cabinet door What do all of these AVENTOS HK lifts from Blum have in common? Their goal: to create the perfect overhead cabinet with high-quality motion, simple planning and installation, and unbeatable design. A product that can be loved by the designer, the cabinet maker, and the homeowner.

Which product will suit your next job best? Jump into e-services. blum.com to configure your cabinet with Blum’s free planning site and discover excellence.

Get the best of both worlds with

Concelo® Laundry W

e often have to make value judgements when it comes to making any purchasing decision. There is often a balance between getting all the features you need but not paying extra for the ones you don’t. The beauty of Concelo laundry hampers is that you can get all the features you need as a manufacturer or installer, as well as the features that give you and your client peace of mind over the long term – all for a similar price to other laundry hampers on the market.

There are options to suit most projects, with single and double hamper models and options for 350mm and 450mm cabinets. Concelo is also available in White and Cinder colour options to suit different styles.

Concelo has been designed to provide quick and easy installation with its advanced door bracket design which provides true 6-way adjustment (+/- 2.5mm vertical and horizontal, +/- 0.75-degree pitch). Once the installation and adjustment is complete, the locking bolt system on the door brackets ensures there will be no need to return for further adjustments.

What sets Concelo apart from any other laundry hampers on the market is the materials used to ensure long term durability. The hampers are supported by moulded Clip n’ Clean trays, manufactured from the same durable polypropylene as the laundry hamper. The trays clip into durable powder coated aluminum drawer sides. This smart design makes cleaning a breeze, and virtually eliminates any issue with rusting for ultimate peace of mind.

If you have not tried Concelo laundry hampers for yourself and would like to compare them to your current solution, contact the team at Hideaway Bins.

To learn more, visit hideawaybins.co.nz/laundry or email our team at info@hideawaybins.co.nz.

Concelo is distributed nationwide by Hafele, and regionally by Carters, Impey’s and Industry HQ.

Concelo Laundry features (1) Hampers available in 35L and 60L size (2) Clip’n’CleanTrays, (3) Door Bracket with 6 way adjustment (4) 45kg Soft Close Matrix Runners (5) Side mounting to suit System 32mm Drilling.

LAUNDRY HAMPERS WITHOUT COMPROMISE Maximum Durability Critical components are constructed using materials that will never rust

Easy and Secure Door Adjustments Install once and then never have to come back

Options for any Project Available in White and Cinder colours, Single or Double hamper, to suit 350 or 450mm wide cabinets To see the full Concelo Laundry range go to

hideawaybins.co.nz/laundry

Project Credit: Du Bois Design

If you have not seen Concelo for yourself, contact us to book a time to show you: info@hideawaybins.co.nz JOINERS Magazine December 2024 page 47

PLANERO Premium Kitchen Storage Options from Vauth-Sagel of Germany

F

or more than 60 years (since 1 9 6 2 ) , Va u t h - S a g e l o f Germany has been developing and manufacturing high-quality, innovative products for the global furniture industry. Their expertise and attention to detail have produced a process that considers ease of use, stylish looks, and durability for homeowners alongside efficiency for the trade. (Their EasyFit system makes for user-friendly and fast installation.)

Planero Function, Design & Comfort Vauth-Sagel products embody the very best of European style and German precision, none more so than their Planero style.

As Claus Sagel, CEO, says, “Our products combine functionality, design, and comfort. Planero is a perfect example of this.”

Powder Coating with zero solvents Like FIT, Vauth-Sagel is a family-owned firm managed by its owners and committed to service and quality. They have a strong focus on research and development. You will be pleased to know that they work to high environmental standards, including having had an FSC® certification for the timber they use. In 2019, Vauth-Sagel upgraded their powder coating process; their sheet metal plant at Korbach in Germany houses a thoroughly modern thin film powder coat facility that uses absolutely no solvents. They also hold an ISO 14001 certification and utilise LGA testing for safety guarantees.

For more info about the VauthSagel range, check the Kitchen Storage section of FIT’s website or contact your Fit rep, phone 09 431 0025 or email info@fit-nz.co.nz to discuss your requirements.

Kitchen design by Craig Hooper Design. Joinery by Cooper Webley Residential and Commercial Joinery.

Project by Sunshine Joinery, Napier.

Photo Sarah Horn.

Photo courtesy Keith Paton Joinery, Cambridge.

Photo courtesy Victoria Gaylard Design, Auckland.

Photo courtesy BuildTiny. Cabinetry

by Variant Spaces Auckland.

FIT’s Planero range includes 7 popular units

Photo courtesy JS Kitchens, Palmerston North.

JOINERS Magazine December 2024 page 48

•

VS Cornerstone Maxx, the brilliant blind corner pull out, in 2 shelf and 4 shelf options, that doesn’t block adjacent cabinets when extended. Hidden fastening for a great floating look.

•

VS COR Fold, also for blind corners and with a very user-friendly movement.

•

VS COR Wheel Pro, the ‘lazy susan’ solution for the 21st century; no central support column so more storage space!

•

VS TAL Larder, the classic fixed front pull out pantry, available in 4 heights and for 2 cabinet widths

•

VS SUB Side, the classis side mounted under bench pull out with 2 baskets and available for both 200mm and 300mm wide cabinets.

•

VS SUB Slim, needing a cabinet just 150mm wide this one makes the most of even skinny spaces.

•

VS SUB Basket, slide out shelves in 4 width options ideal for base cabinets or stacked for pantry storage.

BCITO celebrates construction employers BCITO recently announced the winners of the 2024 Building Leaders Awards, celebrating outstanding employers who are helping build the future leaders of tomorrow’s construction sector.

BCITO Building Leaders Award winners Juan Gasper Dunedin City Contracting Carpentry

With more than 600 nominations received from BCITO apprentices around the country, these awards recognise employers who have gone above and beyond in empowering and supporting their people.

“We’ve had a huge response from our tradies wanting to acknowledge how their employers have shown amazing dedication to passing on essential trade skills while also helping them achieve their personal goals and grow as people. I want to thank everyone who shared their stories and enabled us to give their mentors the recognition they deserve,” said Greg Durkin, Director of BCITO.

Karalee Stronghold Group Commercial Construction Greg Durkin, BCITO Director; Rex Podmore, Brownmore Concrete; Jonathan Tito, BCITO Industry Advocate - Concrete.

Clint Sewell Swish Decorating Painting & Decorating Aaron Quinn Carters Frame & Truss Rodney Heller, Arran Walker & Michael Cooper Interior Construction ICON Interior Construction

The winners were presented with their awards at a gala dinner in Auckland on 5 November, part of BCITO’s annual Skills Summit on building New Zealand’s trades talent pipeline.

Among this year’s winners was Rex Podmore at Waihi’s Brownmore Concrete. A 25-year concreting veteran, Rex was nominated by several of his employees, including Todd Maitland, who shared how Rex supported him as a young man with autism, developmental delay syndrome, verbal dyspraxia and vision impairment. To help Todd with his development, Rex created visual learning tools and customised materials to help him understand the tasks he needed to do. He also allowed Todd time off to pursue his passion for basketball, as a Bay of Plenty and Tasmanian basketball representative.

Brad Street at The Kitchen Business was nominated by his employee Simon Maiava.

Simon, who has social anxiety disorder, initially feared it would not be understood.

However, Brad demonstrated exceptional compassion and created a safe and inclusive environment that allowed Simon to feel valued and supported.

Fellow winner Brian Burke’s dedication to mentoring was highlighted by the success of his apprentice, Jackson Bell, who recently won the Stage 3 Flooring Apprentice of the Year award.

Brian’s unwavering support for Jackson both professionally and personally exemplifies his commitment to the growth and well-being of his team, bringing on the next generation of passionate flooring specialists.

Rex Podmore Brownmore Concrete Concrete

Ian Hunter Construction Coatings Ltd Resin Flooring Greg Durkin, BCITO Director; Brian Burke, MeasureUp; David Lafaele, BCITO Industry Advocate - Flooring.

Ethan Leggett Cutting Edge Tiling Tiling Manu Toailoa Redrock Plaster Exterior Plastering Brad Street The Kitchen Business Kitchen & Bathroom Design Kaine Harkins Your Haven Ltd Brick & Block Brian Burke MeasureUp Flooring

Greg Durkin, BCITO Director; Brad Street, The Kitchen Business; David Lafaele; BCITO Industry Advocate - Kitchen and Bathroom Design

“It’s vital for the future of both the trades and New Zealand to have leaders who do more than just provide jobs,” said Mr Durkin. “By investing in their people, all our award winners are passing on essential skills to the workforce, shaping the industry’s next generation, and building a strong future for New Zealand.”

Richard Steele Nulook North Window & Doors Architectural Aluminium Joinery Steve Wynn Metro Direct Glass & Glazing Aaron Whiteman Aaron Whiteman Monumental Masonry Limited Stonemasonry Sam Burges Optimal Windows Timber Joinery

www.bcito.org.nz

JOINERS Magazine December 2024 page 49

Saw stories Despite the advance of CNC routers into the cutting domain, most wood or panel shops still have a place for a saw of some description - we talked to several suppliers and several users and found that the sliding saw and the beam saw remain the most relevant, the first for its all-round utility status and the second for its abilty to provide simple cutting in large volumes, very efficiently .

Chris & Richard from Otago University - p.52

Garth Beer from Fieldcraft - p.58

Hamish Wilkie and Derek Heard from Cabjaks. - p.56

Gerard Tioti from Mulford Plastics - p.54

JOINERS Magazine December 2024 page 50

Safety without compromise L'invincibile si 3 blade off

Class si 400ep blade off

The advantages of Blade Off

Smart detection

Movement freedom

Quick accurate reset

Expanded protection

The blade off system prevents any accidental contact with the blade thanks to an intelligent system that using smart sensors, can recognise the human body and trigger the system even before the operator gets too close to the blade, protecting the danger zone around it, at all times and in all environmental conditions.

The system automatically excludes the blade in a rapid, repeatable and non-distructive way, activating in a few milliseconds, avoiding contact between the blade cutting edge and the human body even at high feed speeds of up to 2 m/s. Moreover, in the event of an intervention, the system can be rearmed without affecting the accuracy and the performance of the machine.

Live demo’s at - https://youtu.be/qxKyMHpu2hM & https://youtu.be/cXRsf3gdccA

JOINERS Magazine December 2024 page 51

PCS is a groundbreaking technology designed to protect users by instantly retracting the saw blade below the table when detecting potential human contact.

Chris and Richard from Otago uni peoperty services team with the Kappa 550 e-motion - quieter, smoother, safer.

Staff safety paramount University of Otago’s Property Services Team chooses precision and safety with Format-4 Kappa 550 e-motion The University of Otago Property Services is the silent powerhouse behind countless projects and maintenance jobs across its sprawling campus. With over 200 buildings, including the medical and dentistry schools they handle approximately 30,000 job requests each year, from custom joinery and cabinetry to creating specialised furniture for labs, flats and offices. For the team of three full-time joiners and two trade assistants, reliable, accurate machinery is essential to keep up with their diverse workload.

Two years ago the Property Services team decided it was time to replace their 20-year-old panel saw. “Accuracy and safety were top of the shopping list for a new panel saw,” explains Chris, one of the team’s senior joiners.

After evaluating various options, they chose a Format-4 kappa 550 e-motion panel saw from Austrian manufacturer the Felder Group - a choice driven by the saw’s precision and cutting-edge safety technology.

The standout safety feature of the kappa 550 is the Preventive Contact System (PCS). PCS is a groundbreaking technology designed to protect users by instantly retracting the saw blade below the table when detecting potential human contact. Unlike some other similar mechanisms, PCS uses an innovative electromagnetic response which drops the blade within milliseconds without causing any damage to it. “This PCS not only improves operator safety,” Chris says, “but it also ensures minimal downtime as the saw can be reset and back in operation straight away.”

Chris describes how the PCS has proven itself in practice: “We’ve actually triggered the PCS system on quite a few occasions,” he says. “We make whiteboards for classrooms, which have a thin layer of aluminium. When the PCS system is active, it senses the metal and triggers the blade drop as a safety measure. So, we know it definitely works!

JOINERS Magazine December 2024 page 52

We can temporarily turn off the PCS for that specific material, but it’s reassuring to see just how responsive the system is.”

Beyond safety, accuracy was another critical factor for the team. “It’s nice to have reliable accuracy,” says Richard, another joiner on the team. “No more tapping the rip fence back and forth to set it accurately. We just type in the required measurement, press the start button and the rip fence moves into position.”

This level of precision not only improves the quality of their work but also speeds up production, as there’s less time spent adjusting and re-checking measurements.

The kappa 550 e-motion also comes equipped with a large, user-friendly screen and an X-Roll sliding table. “The large screen is really well laid out,” Chris mentions, “and I love the X-Roll sliding table. It runs really smooth making it easier to handle larger and heavier panels with confidence.”

Another unexpected benefit has been the quieter operation and improved dust extraction.

“The kappa 550 is noticeably quieter than our old saw,” says Chris. “And since we swapped saws, there’s been far less dust in the workshop. It’s made a big difference in our working environment.”

For the University of Otago Property Services team, the Format-4 kappa 550 e-motion has proven to be a valuable upgrade.

With its combination of precision, advanced safety technology and improved working conditions, it has become an essential tool in helping the team meet the demands of a busy campus.

Felder machinery is sold and serviced in NZ by Jacks www.jacks.co.nz

Joinery and shopfitting workshops, where CNC technology is less applicable continue to rely heavily on sliding table saws for much of their workload.

Modern-day sliding saws Until recently, traditional sliding table saws were the backbone of every cabinetry and joinery workshop. Nearly every workpiece would pass through the saw at some stage. To avoid bottlenecks and boost productivity, many workshops had two or three saws. This was before the rise of nesting CNCs, particularly in cabinetry workshops.

With the increasing popularity of nesting CNCs, the role of saws has diminished. CNCs now handle the bulk of cutting and drilling for cabinetry components. As a result, saws have been relegated to secondary tasks, such as making trim cuts or converting offcuts into usable parts like scribers and toe kicks. In these cases, the sliding table saw becomes more of an auxiliary machine to the CNC, without the need for advanced features.

For workshops that haven’t adopted nesting CNCs, modern saws can be equipped to upload cutting lists directly from cabinet design software. This software calculates the most efficient cutting list to minimise cuts

More advanced sliding table saws come equipped with features that assist in creating complex workpieces, such as compound mitres, parallelograms, polygons, jack rafters, rows of grooves, and even stairs. Operators can input data directly into the saw’s control panel and follow precise setup and cutting instructions, significantly speeding up production of intricate designs.

Digital setting of stops & fences are a big advantage.

and maximise material savings, enhancing productivity for those who still rely on saws for a significant portion of their work.

Joinery and shopfitting workshops, where CNC technology is less applicable continue to rely heavily on sliding table saws for much of their workload. Their priorities differ from those of cabinetmakers as these saws need to be durable, accurate and user-friendly. Features like digital displays for setting crosscut stops and rip fences are a big advantage. Automatic rip fences in particular can improve efficiency by up to 30% compared to manual systems, while also enhancing accuracy.

Saw safety has also made significant strides with the introduction of safe-saw technology, a breakthrough that’s transforming workshop safety. This system detects human tissue near the sawblade and reacts in milliseconds to lower the blade, preventing injury. As the technology evolves, it's now possible to restart the saw with the push of a button, with the original sawblade intact and ready for use.  Our thanks to Simon Hornby, Head of Sales at Jacks for providing this article.

JOINERS Magazine December 2024 page 53

Branch Manager Gerard Tioti with the Biesse Selco SK3 beamsaw which has seen a smoother flow of work through their factory.

Right saw right service Biesse standout in selection process When Mulford Plastics looked around at alternatives to replace their ageing Giben beamsaw Biesse quickly established themselves as the obvious choice in terms of machine performance and service support. We spoke to manager Gerard Tioti about how the purchase of a Biesse Selco SK3 has improved the cutting process and job completion time at their Auckland branch.

With several branches around the country Mulford Plastics is a major supplier of cut-to-size sheets for sign writer clients who provide signage and light boxes, often for large commercial customers with multiple requirements. For 20 odd years this had been done on a Giben beamsaw but as it aged and became outdated it was beginning to become a problem area in factory throughput.

In researching for a replacement and in observing similar machinery operated by their own clients, Biesse and the Selco SK3 instantly stood out as a company of international standing that could be relied on and a machine that could cut the types of material

that they used - mostly plastics and polycarbonate based materials but also some aluminium and mdf panels - efficiently, quickly and accurately.

“In live demonstrations Biesse were able to show us that it did everything we needed and wanted, which not only gave us confidence that the Selco would handle what we did from day to day, but also that they had the ability and resources to service and maintain the machine as and when required,” says Gerard Tioti. “If our cutting process goes down we instantly have a backlog of work, and likely some upset customers, so it is very important any issues are sorted quickly.”

JOINERS Magazine December 2024 page 54

The Selco SK3 is well suited to the needs of a client such as Mulford Plastics as it has been specifically designed for single parts production and small series runs, with Biesse’s own onboard software optimising material usage. Importantly, it also has a side aligner integrated with the saw carriage to perfectly align thin or flexible panels - even the thin sheets Mulford often cut.

“It is easy as pie to set and run.” says Gerard, “our cutting process is very simple, all square work and often multiple sheets of the same dimension. Depending on the thickness of the board we can easily process multiple sheets, if say we are working with 3mm

board which is often the case we will cut up to 10 sheets at a time, all perfectly clean and square and ready to go.”

“To date service has been near perfect, on the couple of times we have needed them, maybe for a wiring issue or programing assistance, Biesse have been very quick to respond. The whole experience has been pretty smooth from the initial install to this point a couple of years later. Biesse have been good to deal with and the machine has certainly made my job easier while significantly improving our processing time, factory flow and costings.” 

Always ready Zero mistakes, minimised defects and downtime: a perfect job.

A future proof choice requires the best partner l We want to improve and simplify your daily operational activities by an automatic robotic solution integrated in your process.

Your reliable co-worker.

Discover more on ROS for Rover machines.

0800 BIESSE (243 773) info@biessenewzealand.co.nz

JOINERS Magazine December 2024 page 55

Cabjaks in growth mode it’s all about resiliency, efficiency & increased production Growing to meet demand has always been a challenge and none more so than in recent economic times but some businesses have, like Auckland based cabinetry manufacturer Cabjaks, grown in the last few years to the point where the need for new plant and equipment was necessary: a new rear lift beamsaw, an automatic drilling and dowel inserting machine and an edgebander all from German machinery manufacturers HOMAG. Bob Nordgren from JOINERS Magazine recently spoke with Cabjaks Managing Director Derek Heard about these purchases and what they mean for Cabjaks.

“Cabjaks manufacture laundry, kitchen and wardrobe cabinetry, as well as benchtops for commercial and residential customers.” explains Derek. The business has two operational locations. The componentry is made in their 1400 square metre factory in Ra Ora Drive in East Tamaki by Cabjaks Manufacturing Ltd then transported some 800 metres up the road to their 1100 square metre plant in Echelon Place where it is fully assembled, glued and dowelled by Cabjaks Assembly Ltd. They also make custom benchtops to go to customers specifications.

The business was bought from the previous owner back in 2017

by Jason Shaw. Fellow Director Hamish Wilkie joined in 2020 and Derek came on board in October 2022. Unusually for a joinery business Cabjaks have developed their own proprietary design planning software, enabling customers to complete their own designs and pricing online. This front end integrated seamlessly into a full end to end manufacturing and distribution ERP system making the process of design to delivery seamless.

“While some customers come into our showroom, most of our sales are generated through our online platform, and the systems are continually developed to ensure the customer journey is really easy” Derek comments.

The ease of process has led to the need to meet increased demand.

“My role here is to oversee business growth and develop strategies to achieve it.” says Derek “To satisfy our increased demand, we needed to increase capacity, plainly put produce more components on a daily basis. To do this we needed machinery that offered resiliency, efficiency and of course increased output.”

Cabjaks Director Hamish Wilkie (left) and Managing Director Derek Heard

Following a lengthy investigation including looking at overseas trade shows they settled on a suite of machinery from HOMAG. Derek notes “This in effect is a new plant set up which gives us better production speed and hence higher volume of components.

Through the whole process we quickly established a good rapport with the HOMAG team, Alexis Pantelides on the ground here in New Zealand and the rest of the team both locally and in Australia.

They understood what we were looking to achieve and we worked well together. The suite offered us a real, practical solution to increase our production capacity.”

JOINERS Magazine December 2024 page 56

The machinery involved are a SAWTEQ S-410 rear lift beamsaw which can cut up to three 3660 x 2440 x 30mm sheets at a time or up to seven sheets 2440 x 1830 x 16mm using a CADmatic controller and Cutrite Optimisation software. It can then be processed through a CNC machining centre DRILLTEQ H-600 (BHX 500) auto drilling and dowel inserting machine. The machine has a CNC controlled clamping system with simple access to the machining unit. There are seven different spindle settings possible with up to 104 drilling spindles. “This technology dovetails with our ERP systems to ensure we are fast and efficient, and significantly improves our daily volume of available componentry” Derek says.

To complete the package is an EDGETEQ S-500 (KAL375) edgebander which is about to be installed. This edgebander has an edgeband thickness of 12mm and a panel thickness of 60mm,

thickness of coiled edgeband of 3mm, a quick change glue pot system, a premilling unit and a corner rounding unit to name just a few features. Servicing comes from both Australia and dedicated technicians here in New Zealand.

And what in the future? “In partnership with HOMAG this new plant completes our manufacturing suite to deliver sustainable growth.

It also provides us with a step in technology delivering further efficiency.” Derek says

For more information contact Derek Heard at Cabjaks ph 0275 278 360, email Derek@cabjacks. co.nz or visit www.cabjaks.co.nz

For those who want to get off to a good start.

SAWTEQ S-200

Panel dividing saw SAWTEQ S-200 The SAWTEQ S-200 has everything you need for cutting in woodworking shops: power, precision and flexibility. This is also evident in the expansion options: for example, you can increase the performance of the saw with a simple storage control connection.

www.homag.com | sales-australia@homag.com | Toll free 0800 HOMAG1

YOUR SOLUTION JOINERS Magazine December 2024 page 57

The panel saw delivers straight line precision even under heavy loads.

It has a powerful 5.5 KW motor and a strong, stable frame.

Garth Beer with the new panel saw from Farnese - its ability to cut 3.6m board gives great flexibility and cost effectiveness.

Best solutions from Fieldcraft Growing a business can be achieved in a variety of ways. For cabinetry manufacturers Garth Beer and Phill Badger from Fieldcraft Ltd this has meant investment in a new panel saw and edgebander from machinery suppliers Farnese NZ Ltd giving them more flexibility in what they make and the capacity to increase their production. Bob Nordgren from JOINERS Magazine took the opportunity recently to talk to Garth about their decision and the impact on their business to date.

Fieldcraft Ltd was established back in 2015 and moved to their 500 square metre factory in Keeling Rd, Henderson in 2022.

Garth and Phill are involved in the day to day running of a small, dynamic design and manufacture studio making bespoke furniture, cabinetry and interiors for the residential and commercial sectors.

They have the capacity to run jobs from concept through to completion and work with private clients, interior designers, architects and construction companies. There are five staff on the floor and up to five contracted staff involved in the design aspect of the business. “With the team we have we are able to offer the best solution to meet our clients’ needs” comments Garth.

This has seen traditional construction combined with the use of cutting edge CNC technology with an emphasis on

craftsmanship and attention to detail.“Recently we undertook an upgrade process with the purchase of two new machines from Farnese NZ Ltd (formerly Proform NZ Ltd): a Farnese FM 1538 panel saw and a Fravol M200-23 edgebander. These machines have given us more flexibility in what we make and capacity to increase production.

They are key components in our nest based manufacturing process” Garth explains.

The panel saw delivers straight line precision even under heavy loads. It has a powerful 5.5 KW motor and a strong, stable frame. It is operated through a touchscreen controller which is easy to operate and set at eye level for user comfort. The main saw blade, slide seat and blade tilting is electrically adjusted through the touchscreen as well. “The saw can handle 3.6 metre board giving us real flexibility and cost effectiveness” comments Garth.

JOINERS Magazine December 2024 page 58

The edgebander is a compact (only 3 metres long) entry level machine. Despite it’s compactness there is no compromise on edge quality. “The invisible edge finish is really impressive along with the quick and easy clean up process, something everyone who uses an edgebander would like to have” comments Garth. In the gluing process it removes excess glue on both the upper and lower parts of the board. “It is very user friendly and is operated from a touchscreen as well and has the Syncro corner rounding unit: a really useful feature. I have to say the install for both these machines from the team at Farnese was really good with ongoing service being exceptional,” he adds.

Alongside the cabinetry business they operate a contract cutting and manufacturing service under the banner of ‘Smoke and Mirrors’.

“This works well for us as we have a good team of designers (technically industrial designers)

as well as the capacity to produce.

We are always looking to push the CNC technology beyond the box so to speak” says Garth. The cutting edge also comes from their Rhino software from the USA, a powerful and flexible 3D modelling package with Rhino CAD/CAM software to progamme their machines to run the design side of the business.

“This combined with our new machinery has given us the ability to produce more and be really competitive yet not lose sight of the craftsmanship and attention to detail we have always had. We have worked with a large array of materials machining all sorts, solid timber, timber sheet, plastic, non ferrous metals and so on to meet our client’s needs.” Garth notes.

For further information contact Garth Beer at Fieldcraft Ltd, Unit B5, 29 Keeling Rd, Henderson, Auckland ph 027 469 2352, email garth@fieldcraft.co.nz or visit www. fieldcraft.co.nz

M200-23

The modern, compact design of the Italian ian FRAVOL M200-23 EDGEBANDER saves space spac sp ace without compromising on performance or edge edge ge quality. A mix of solutions, applications and d technologies in just 3 metres.

WINNER 485 5 AXIS CNC

The Winner series from Masterwood has been designed to meet the needs of most companies, offering the best technical solutions on the market. Winner machining centres offer flexibility of usage, reliability and high productivity.

FIMAL TABLE SAW

A classic among machines for processing wood and wood products.

F.I.MA.L. circular saws are the perfect woodworking solution for people who must perform frequent cuts with different angles.

MAGGI TECHNOLOGY

Founded in 1963 in Tuscany (Italy), designs and manufactures woodworking machines created to respond to the needs of artisans and small-scale kitchen and furniture manufacturers.

www.farnese.co.nz

PH 04-526 8589

JOINERS Magazine December 2024 page 59 info@farnese.co.nz

Keeping your hands off the blade The latest models of the CLASS Si400 EP and L'Invincibile Si3 saws from SCM feature their“Blade Off” innovation. Of particular interest in this innovation is the non contact development, a significant feature being the operator does not need to come into contact with the blade as the scanner is able to detect a human hand a distance away from the blade.

Safety and Ergonomics The new system for circular saws is the innovative technological solution designed by SCM to work in total safety. The essential design ensures movement freedom related to overall dimensions and aesthetics impact.

Smart Solution Due to the detection type, blade off activates regardless of the hand position and any other part of the human body inside the danger zone. The system operates despite of the personal protective equipment the operator wears; in fact, it also performs perfectly with any type of glove worn.

Expanded Protection The protection is guaranteed on the 3 areas next to the blade (work-piece infeed and side areas) to prevent any possible contact even caused by inappropriate or accidental movements.

Repeatability and Reliability The system provides the possibility of quick reset without compromising the machine quality and stability over time.

T 09 820 9846 E sales@machinesrus.co.nz machinesrus.co.nz

Leitz sets the benchmark for circular saw machining

The newly commissioned Vollmer CHX 840 provides Leitz NZ with the ability for very quick turn around in its blade sharpening business.

Leitz Tooling have recently commissioned a Vollmer CHX 840 circular saw sharpening machine from the well known German manufacturer. Installed in their Auckland workshop in Auckland, this machine offers a range of options for customers of Leitz Tooling.

“This machine” comments Leitz’s Lionel Botha “offers our clientele the latest in German sharpening technology and represents a further significant investment in the New Zealand market.

Available for both the saw mill industry, solid wood processing and furniture manufacturing as

JOINERS Magazine December 2024 page 60

well as for metal machining, the CHX 840 can service circular blades up to 840mm quickly and efficiently with typical high quality machining from Vollmer.

This makes for a quick turn round for our clients. A feature of this new set up is it offers automation for unmanned operation.”

The CHX 840 is used in conjunction with a compact fluid filtering system (pictured) from industrial filter experts Lehmann, also from Germany. This ensures the fluid used in the cutting process is always fit for purpose. 

Sizing circular sawblades Flexible multi-purpose professional tools

When sizing a wide variety of different materials, the main objective is to achieve a constant and high cutting quality so that re-work is no longer necessary. Noise reduction is an additional benefit.

From the cutting of wooden planks to the processing of wood-derived panels with a multitude of coatings as well as plastic or fire protection panels – the sizing sawblades from Leitz always provide perfect machining results combined with long tool life. Leitz has the correct tool for every requirement.

YOUR BENEFITS Ŷ Machining a wide range of materials Ŷ Perfect cutting quality Ŷ For finishing and cutting to size Ŷ Long tool lifetime AT A GLANCE Ŷ Premium: for multi-purpose applications Ŷ Excellent: for specific applications (WhisperCut, Katana, BrillianceCut) Ŷ Selective filled laser ornaments Ŷ Multiple times resharpenable Ŷ For table and sizing circular sawblades Ŷ For machining a wide range of materials Ŷ Available from stock Ŷ Cutting material HW and DP CONTACT US Freephone: 0800 578 665 Email: sales@leitz.co.nz

JOINERS Magazine December 2024 page 61

Where sawdust flies and inspiration lands …

Under the motto "Where sawdust flies and inspiration lands", HOMAG Treff 2024 thrilled over 2,000 visitors from more than 30 countries. After a wait of more than six years, the famous HOMAG in-house exhibition took place at the same time at two southern German HOMAG locations – in Schopfloch and Holzbronn. From September 24 to 27, 2024, visitors experienced the latest trends and developments in the wood industry live in action.

In addition to machines and systems, digital products, exhibits from partner companies, and insightful presentations, HOMAG Treff offered the perfect platform for exchange and inspiration.

Individual machines and complete production lines and were exhibited in the factory halls in Schopfloch and Holzbronn. The numerous machine demonstrations, on everything from the edge banding of narrow parts, soft forming, and nesting, to robot panel dividing saws, were supplemented by exciting technical and customer presentations on topics such as

Coming together, networking, and being inspired, a look back at HOMAG Treff 2024

the interaction between software and machines for an efficient working day. The program was rounded off by factory tours, which provided a look behind the scenes at HOMAG. Automation and digitization were once again the focus. At the Schopfloch site, visitors were even greeted by an entire exhibition area dedicated to HOMAG software, apps, digital assistants, and service. The experts from SCHULER Consulting were also on site to exchange ideas with interested parties about concrete automation potential for production in the furniture and timber construction segment. The focus was on measures to optimize the production process, reduce costs and increasedigitalization.

For the first time, numerous trade exhibitors and partner companies such as BENZ Tooling, DÜRR AG, tapio and many more

JOINERS Magazine December 2024 page 62

were also present. In short, the HOMAG Treff promised firsthand information and lots of innovations - from panel dividing, CNC machining and edging to software, automation and digitalization.

Technical highlights and innovations This year visitors were inspired by the diverse technical highlights and innovations. There were first-hand insights into multiple different technologies and solution areas, including: Robot efficiency at an entrylevel price: The new SAWTEQ S-300/S-400 flexTec With the SAWTEQ S-300/S-400 flexTec robot saws, HOMAG has a proven solution for fully automatic cutting in batch size 1 in its portfolio. Until now, larger companies in particular had benefited from their efficiency and the advantages of unmanned production. The shortage of skilled workers was also and especially in the skilled trades a major challenge. For this reason, HOMAG presented a new standard configuration of the SAWTEQ S-300/S-400 flexTec at the in-house exhibition. The further development offered robot efficiency at an entry-level price

and could be flexibly expanded technically if necessary – ideal for growing companies.

More convenience, less storage activity: with quickTip and intelliStore AI – Offcuts At the in-house exhibition, the latest development of the HOMAG storage software woodStore 8 was presented, which sets new standards in terms of ease of use and resource efficiency. The first is quickTip: The integrated assistant provides users with proactive support, provides setting recommendations, and helps the machine operator to systematically exploit the storage potential. This saves valuable space and reduces energy consumption. The fact that intelligent software solutions increase efficiency is also proven by intelliStore AI – Offcuts. This is because it can reduce warehouse movements by up to 40% for automatic scrap management.

The new development enables automatic residual storage on defined panel stacks freely distributed in the warehouse – if necessary, also in combination with classic remnant storage locations.

(continued over page)

Cutting Production Set. The Cutting Assistant Cutting optimization & label printing for ANY saw.

Our cutting assistant supports you in optimizing your cutting patterns, in labeling the parts and in the cutting process on your manual saw. Simply optimize your cutting patterns with a click and transfer them to the app on your tablet in the workshop. The cutting assistant was developed for use on ALL sliding table saws, vertical saws or horizontal panel saws – regardless of type, age or manufacturer.

www.homag.com | sales-australia@homag.com | Toll free 0800 HOMAG1

YOUR SOLUTION JOINERS Magazine December 2024 page 63

Where sawdust flies and inspiration lands … (cont) Reproducing components and forming batches – now in the HOMAG productionManager!

Not everything in the production process always succeeds at the first attempt. But that doesn't matter if you can react easily and flexibly and quickly reproduce individual parts. For this purpose, there is now the "Reproduction" function in the productionManager app. It’s practical and easy: Components can be digitally recorded directly by the machine operator at the point of action and ordered for reproduction, with part-specific information for work preparation.

Speaking of work preparation: With the new "Batch Formation" function, orders are intelligently combined into production batches.

This allows orders to be bundled into batches in terms of time and material and transferred directly to a cutting optimization department or simply exported as a blank list – depending on the requirements.

This not only saves money, it also reduces material consumption. intelliDivide Cutting: three innovations for HOMAG cutting optimization True to the motto "Always one cut ahead", HOMAG presented several innovations for the intelliDivide Cutting optimization software at the in-house exhibition.

• Optimize more intelligently with templates: If you want to produce certain components more frequently in a predefined arrangement or consciously keep components together, you can now create templates for this purpose and store them as templates in the intelliDivide Cutting library.

• Hand in hand with the woodStore storage system software: From now on, all material data, inventories and panel remnants stored in woodStore are automatically available for the intelliDivide Cutting optimization system.

After cutting, leftovers are transferred to woodStore and offered for reuse during the next optimization.

• AI-supported production time predictions: Until

Improved options in the storage, selection and movement of panel were a highlight for visitors at Homag Treff 2024

now, intelliDivide Cutting has calculated the expected production times based on fixed assumptions. With the help of artificial intelligence (AI), the predictions are now much more accurate.

This improves planning and allows for more precise calculations.

The CNC accelerator for nesting – HOMAG STORETEQ F-100 single-axis feeder The STORETEQ F-100 singleaxis feeder ensures even more efficiency and flexibility in nesting – in a material-friendly, automatic, and fast way. It is an asset all along the line – and with minimal space requirements. The control is carried out via woodStore directly on the CENTATEQ N-210 or N-510 CNC machining center.

This interaction creates a complete craft cell – including manual scrap management. The gantry uses a vacuum suction cup to fetch the next panel just-in-time from the stacking area next to or behind the CNC machining center, rotates the material up to 90° if necessary and places it on the roller conveyor.

Everything is fully automatic.

JOINERS Magazine December 2024 page 64

The edge leap for the trade: LOOPTEQ O-400 and EDGETEQ S-200 Modern industrial technology at trade conditions: This is what HOMAG offers with the new LOOPTEQ O-400 portal return system as well as with the EDGETEQ S-200. Two solutions that are equivalent to a quantum leap in edge processing. The newly developed LOOPTEQ O-400 impresses with its high performance and extremely compact design. Thanks to its high degree of automation and the combination of stacking system and workpiece return, it sustainably increases productivity in production – with ergonomic and economical operation by just one person.

With the latest technology from the industrial segment, the EDGETEQ S-200 also convinces.

The smallest HOMAG edge banding machine already has highlights such as a servo edge feeder, flexible magazine height adjustment and vacuum suction cup-based strip separation. A new application unit is coming that enables the adhesive to be

changed in less than three minutes.

This simplifies and accelerates production considerably.

Even better drilling and doweling: DRILLTEQ D-110 With the DRILLTEQ D-110, HOMAG presented a new entrylevel CNC that has exactly two tasks: horizontal drilling and dowels. And it does this particularly effectively. This is ensured by 3 individually retrievable drilling spindles and a space allocation of up to 4 workpieces. Practical: With the CNC programming software woodWOP 8.1, the height and depth of the drilling and dowel operations can be preset. These are then automatically retrieved during processing. The dowel technology of the DRILLTEQ D-110 has already proven itself many times over in higher HOMAG series.

www.homag.com

ZOMODO was conceived and developed by Phil and Caitlin Ross, an Australian family renown for innovation and progressive thinking within the stainless steel industry. The ZOMODO philosophy was simple – combine innovative features, with premium quality manufacturing, at a reasonable price. The success of the ZOMODO brand has seen the range grow from 4 sinks and 1 tap, to a wide range of models, accessories, and tapware.

The Pearl Arc range was introduced in September 2019, offering a range of sink models, 3 colours, and several accessories.

The 3-step process was boasted to be the best available, providing peace of mind to specifiers, designers, and joiners across New Zealand. ZOMODO’s 3-step process still remains the key point of difference, that customers have come to trust.

•

•

•

5

Celebrating

ZOMODO

Bead Blasting – hardens the steel and creates a micro texture, giving the ZOMODO coloured sink their scratch resistant properties, and incredible durability.

PVD colouring – the colouring process so accurate that each batch is indistinguishable from another Nano Coating – Each sink is coasted with a non-stick nano resin responsible for the smooth stain resistant finish, allowing your sink to be effortlessly wiped clean.

All ZOMODO sinks meet the NZ overflow regulations, are supplied with a matching floor grid and waste cover – all taps are WELs rated and meet the Water Mark quality.

ZOMODO BOUTIQUE 2024 saw the release of ZOMODO’s premium Boutique range – a range of sinks that epitomises quality, features, and innovation. Each Boutique sink includes the full range of accessories, which nest on 2 levels with the sink.

The large THREE bowl integrato is the true hero of the Boutique range and is considered the ultimate addition for the true entertainer.

Reach out for more details on the Zomodo range on REWARD Hospitality: 0800 MY SINK sales@rewardh.co.nz www.rewardhospitality.co.nz or visit the ZOMODO.CO.NZ for the full NZ range

Zomodo 3HDUO$UF LQ 1HZ =HDODQG

years of =RPRGR­V 39' VLQNV ´UVW ODXQFKHG DW WKH $XFNODQG +RPH 6KRZ LQ DQG FDXJKW WKH H\H RI YLVLWRUV ZKR ZHUH LPPHGLDWHO\ LPSUHVVHG ZLWK WKH FRORXU DQG WKH GXUDELOLW\ 7KH UDQJH KDV JURZQ IURP ´YH VLQN PRGHOV WR D ZLGH UDQJH RI VLQJOH DQG GRXEOH ERZOV WKUHH WDS PRGHOV DQG D FROOHFWLRQ RI DFFHVVRULHV LQFOXGLQJ NLWFKHQ KDQGOHV HDFK DYDLODEOH LQ %ODFN *ROG DQG %URQ]H WR PDWFK \RXU VLQN SHUIHFWO\ To celebrate this milestone, we are offering our popular Dish Mat and Colander sink accessories in a special edition Pink Champagne PVD for a limited time only.

Pink Champagne

Pink Champagne

'LVK 0DW +.2

&RODQGHU +.2

RRP $199 LQFO JVW :KROHVDOH $121.13 JVW

RRP $199 LQFO JVW :KROHVDOH $121.13 JVW

7KHVH DFFHVVRULHV ZLOO VXLW DQ\ =RPRGR %ODFN %URQ]H DQG *ROG VLQN PP IURQW WR EDFN

View our ranges online or contact us today for more information.

rewardhospitality.co.nz JOINERS Magazine December 2024 page 65

240809AD

0800 MY SINK

Egmont Air delivers powerful dust control for Hansen Timber’s growing operations timber ourselves. We needed a dust extraction system that would allow us to work safely while maintaining the quality our customers expect.”

Egmont Air’s Customised Extraction Solution To address Hansen Timber’s dust management needs, Egmont Air’s Clean Air Consultant, Richard, conducted an on-site evaluation and recommended a 40HP Dust Extraction System. John also wanted a system with capacity for future growth, allowing the facility to accommodate additional machinery as operations expand.

The 40HP system ensures clean air, safe equipment operation, and provides flexibility for Hansen Timber’s continued development.

Hansen Timber, a heritage sawmill and timber processing company, has always taken pride in its deep roots and sustainable approach to timber production. Located in the scenic countryside of Clevedon, this family-owned business specialises in a unique range of timber products, from Eucalyptus flooring to Macrocarpa weatherboards, rustic beams, and more.

To support their expanding operations, Hansen Timber recently invested in a custom dust extraction system from Egmont Air, enhancing efficiency, safety, and environmental responsibility on-site.

Meeting Hansen Timbers Unique Needs Owner and director John Riley has long been passionate about sustainably harvesting and processing the timber from Hansen Timber’s extensive forests, many of which he helped plant himself.

By milling timber directly from their land, Hansen Timber can deliver quality products to today’s market, including sought-after timber flooring, weatherboards, and custom beams. However, as the business scaled, John realised that a powerful extraction system was essential for maintaining air quality, protecting workers, and ensuring efficient operations.

John explains:“With large forests of trees on our farm, it made sense to continue the family tradition of sawmilling and process the

JOINERS Magazine December 2024 page 66

This powerful extraction system removes dust and wood shavings generated during the processing of Hansen Timber’s Macrocarpa slabs, beams, sleepers, and other products using a high-pressure fan and aerodynamically routed ductwork which creates highsuction at the Planner cutter heads. From bespoke furniture to landscaping materials, the extraction system ensures a clean workspace while allowing Hansen Timber to sustainably return wood shavings to the environment.

Egmont Air’s installation process was smooth and efficient, thanks to thorough design planning, on-time delivery, and precise drawings that kept the project on schedule.

Hansen Timber was impressed with the professionalism and expertise of Egmont Air ’s installation team. “Egmont Air are awesome to work with—their design, drawings, timeline, and installation were faultless, the team were brilliant, and everything went according to plan.”

Cleaner Air and a Safer Workspace The new extraction system has made a noticeable difference in

air quality at Hansen Timber, creating a healthier workspace for employees and keeping dust under control. The powerful suction minimises particulate buildup on equipment, extending its lifespan and ensuring a dust-free finish on processed timber.

“The suction at the planer is absolutely amazing—there’s no bruising on the timber, the air in the factory is very clean, and we’re able to return wood shavings back to the environment,” John shared.

“The Egmont Air system allows us to continue operations sustainably and prioritise the health and safety of our team.”

Egmont Air: Your Partner in Dust and Fume Extraction Solutions Egmont Air is dedicated to supporting businesses like Hansen Timber, providing the latest in dust extraction technology to meet the unique requirements of New Zealand’s diverse industries. From design to installation, Egmont Air offers custom solutions that enable safer, more efficient, and sustainable operations.

If your business is seeking highquality air extraction systems, contact Egmont Air on 0800 781 200 or visit www.egmontair.co.nz to learn how we can enhance your facility’s productivity and safety.

Farnese showcases craftsmanship

I

n mid-November, Farnese NZ proudly hosted its first Open House Day at their new shop and showroom in Ellerslie. The weather came down, but spirits weren’t dampened as attendees had the opportunity to explore the range of stone consumables and machinery, designed to elevate the standards of craftsmanship in NZ.

The event also provided a fantastic networking opportunity, featuring representatives from R&S Tooling, Cam Solutions, Cabinet Vision, One Finance, and Selleys. As lunch was served, lively conversations filled the air, as joiners and stonemasons from all over NZ enjoyed the day.

In addition to the stone machinery, attendees were also introduced to some of Farnese NZ’s new range of woodworking equipment.

The precision saws and the new Apex auto-labelling CNC line demonstrated how modern technology can enhance traditional woodworking techniques.

A major highlight of the day was the launch of the Farnese Consumables Shop, a one-stop destination for all your stone working needs. From blades and adhesives to gumboots, Farnese offers everything a stone shop requires. With the opening of this showroom, customers can easily come in and purchase the supplies they need at their convenience.

Throughout the day, attendees were able to talk first-hand with not only the sales team but also the technicians who install, service and train in the operating of the range of machines. This interactive experience was a highlight for many, expressing how good it was to know exactly who provides Farnese NZ’s renowned service.

The first Farnese NZ Open House Day was not just an exhibition of machines and consumables; it was a celebration of craftsmanship, innovation, and community spirit.

We are grateful to all who attended and look forward to the next one around March-April 2025.

The Farnese team, Cam, Mike, Josh, Michelle, Alex, Rob, Andrea and Aiden.

Consumables shop, for all needs from blades and adhesives to gumboots.



TECHNICUT

MASSIMO

A versatile cutting machine that combines a bridge saw with waterjet cutting capability. It features a 5-axis CNC control system, side vacuum manipulators for easy material handling, and a thickness measuring probe for precision cuts.

Designed for precise stone fabrication, enabling intricate cuts and detailed shaping of stone materials. Its advanced 3-axis control system ensures high accuracy and efficiency, making it ideal for professional stonemasonry tasks.

SAWJET MONO

3 AXIS CNC

Need expert advice on our machinery? Get in touch with Farnese for all your questions and sales inquiries! We're here to help you find the perfect solution for your business. www.farnese.co.nz

04-5268589

info@farnese.co.nz

JOINERS Magazine December 2024 page 67

new nesting frontiers

with SCM

SCM presents two new CNC machining centres to enhance and integrate its range for nesting processing: the Morbidelli X50 and the Morbidelli X100.

The new nesting frontiers start in Rimini in Italy at SCM’s Headquarters where the two new CNC machining centres were presented in mid September. The two solutions further enhance and integrate the Morbidelli X range already chosen by leading market clients thanks to its capacity to apply high speed and maximum flexibility to nesting machining to meet a market demand that is increasingly focused on “batch one”.

SCM has once again shown, with these new CNC machining centres, its ability to transfer high performance even onto “entry level” solutions, guaranteeing a number of advantages which differentiate its nesting range at highly competitive prices. Every detail has been scrupulously designed with a view to making all the necessary features accessible from an efficiency, machining quality and predictive maintenance point of view.

From a software point of view, it not only has the new Maestro Lab intuitive and dynamic CAD/CAM design system, for programming both from the office and machine, but Morbidelli X50 and Morbidelli X100 also have a state-of-the-art SCM Smart cut algorithm. Elimination of both unproductive times and waste and a reduction in energy consumption and material scraps are the main advantages of this optimiser which proves ideal for the nesting cut of even the smallest pieces. SCM Smart cut applies sequences and cutting technologies which, without affecting either the speed or arrangement of the pieces in the program, improve the finishing quality and reduce cycle times.

Highlighted for both machining centres, we also find the SMS - Spoilboard Management System software, an advanced

The worktable employs High Grip Vacuum technology ensuring the best grip on even the smallest pieces.

solution which, thanks to an exact calculation carried out on the machine, makes it easier for the operator to manage the spoil panel signalling pro-actively when it needs to be rectified or replaced.

Important innovations can also be found in the mechanical characteristics.

One example is the worktable with High Grip Vacuum technology on the Morbidelli X50: practical and sturdy, it is the only one of its kind to guarantee the best grip on the piece thanks to an exclusive SCM patented deflector which distributes the vacuum across the whole surface thus maximising the grip even in the case of panels that are smaller than the machine’s overall area.

Another significant advantage of Morbidelli X50 is its flexibility thanks to XS Device, a device that makes it easier for the operator to refer and machine all the pieces directly on the spoil panel, even the smallest ones.

JOINERS Magazine December 2024 page 68

Also taking priority of place is the SAFE - Safe Advanced Fixed Equipment protection system, one of a kind on the market for ensuring maximum operator safety at all times. This occurs thanks to a perimeter photocell system which provides free access to all four sides to machine right across the board.

fitted with automatic pusher and motorised unloading belt to simplify and speed up the exit of the pieces in complete safety and, in this latter case, even without manual interventions. SCM is, therefore, capable of offering the most suitable solution to the client irrespective of their investment abilities.

The advantages of Morbidelli X50 are rounded off with the top performances of the drilling units, with 8000 rpm RO.AX technology, and boring units capable of machining in nesting up to 40 metres per minute.

Another distinctive feature is the maximum grip on the piece guaranteed by Smart vacuum, the system which concentrates the vacuum only in the parts still to be machined, thus avoiding dispersion in the areas already nested. An innovation that has been added to an already highperforming worktable with PHE - Phenolic High Efficiency technology especially designed for use with the spoil panel.

The innovation at the heart of SCM’s new machining centres for nesting is further amplified with Morbidelli X100. Some of the advantages being highlighted include its excellent configuration versatility: the model is available in different versions, from standalone machine to integrated cell with automatic “flexstore” warehouse, right up to the “push” and “mat” versions respectively



SCM is sold & serviced in NZ

by Machines R Us www.machinesrus.co.nz

Low-cost cable guidance By downsizing, the draw e-chain Igus saves 30 per cent of costs in applications with a low degree of movement reduces effort and costs. "Due to this minimalist design, the draw e-chain costs 30 per cent less than our most cost-effective standard e-chain," says Ottersbach.

For cable guidance in drawers and pull-outs of all kinds, igus is launching the draw e-chain.

Thanks to the minimalist design, the price of the compact energy chain is 30 per cent lower than the most cost-effective standard e-chains. This protects against expensive oversizing, especially if the application is only moved a little.

From drawers in camper vans to pull-outs in server racks in data centres: industrial energy chains for hundreds of thousands of cycles are oversized for guiding cables in applications where movement only occurs occasionally. Users would pay for features that they do not need. "We have therefore developed the draw e-chain, a new compact low-cost energy chain for cable guidance in drawers and pull-outs of all kinds," explains JörgOttersbach, Head of e-chain Business at igus.

The new energy chain has a bend radius of 45mm, an external width of 45mm and an external height of just 22mm. "This makes it 13% flatter than our flattest standard e-chain B17.1.048.0 to date."

The draw-e-chain offers a flat, simple and cost-effective design for cable routing in pull-outs and drawers of all kinds. (Source: igus GmbH)

Minimalist design makes draw e-chain cost-effective The draw-e-chain is not only more compact than standard models, it also costs less. The reason: there are no mechanically complex components. The injectionmoulded e-chain does not need

any chain links to fold. Instead, the segments are flexible enough to allow the required bending.

Thanks to this absence of chain links, the draw-e-chain consists of just six segments per metre, which can be connected via a simple connector system, which

Assembly completed in just a few minutes The draw e-chain is designed so that users can assemble it by hand in a very short time. The lowcost energy chain is designed for installation rotated by 90 degrees, for example on the inner side of a drawer. Connection elements are not necessary. The segments of the cable guidance have holes for screws. "Inserting cables is also done quickly," says Ottersbach.

Unlike standard e-chains, there are no crossbars that users have to open first. "You can simply push the cables through the bendable tabs of the energy chain from above. That takes just a few seconds."

Treotham Automation www.treotham.co.nz 0800 847 200

Schmalz Vacuum Lifting & Clamping Treotham Automation supply the range of Schmalz Vacuum Lifting devices, customizable and suitable for standard weights up to 750kg.

Schmalz clamping solutions are used for a wide range of machining and assembly tasks.

With vacuum power, components made from wood, metal, glass or plastic are fixed securely and without distortion.

JOINERS Magazine December 2024 page 69

www.treotham.co.nz

|

info@treotham.co.nz

|

0800 847 2004

|

Auckland & Hamilton

Cutting-edge tech propells ASC Flatpacks to new heights In 2014, Andrew Steel was at a crossroads. Working as a foreman for a medium-sized cabinet-making business, he found himself juggling full-time work with weekend side projects in cabinetry. Encouraged by his family, Andrew took a leap to start his own business. Initially, his operation was modest - a small section of a factory with basic tools. Today, ASC Flatpacks is thriving, thanks to the integration of Cabinetry.Online technology.

From Basic Tools to High-Tech Solutions Andrew’s journey started humbly with a small edge bander and panel saw. “I knew I needed CNC because I did not want to hand drill and cut everything by hand”. His first taste came with a basic CNC that required manual change of drill bits. As the business grew, so did the need for more sophisticated machinery and software.

ASC Flatpacks' clients have 24/7 access to a unique online portal to quote and order cabinets.

This need was met by integrating Cabinets by Computer’s software into his operations. “I remembered WoodCAM from my early days as an apprentice.” Travis from CBC set up the software while introducing Andrew to online ordering with Cabinetry.Online—a suggestion that catapulted ASC Flatpacks to industry prominence.

In his early days, Andrew often grappled with manual orders and errors that arose from miscommunications. "Every other flat packer I know has got to go by paperwork or a drawing handover, and that's where mistakes happen in the manufacturing side". In contrast, the shift with Cabinetry.Online has virtually eliminated these issues.

“With the online system, it's clear what they order is what they get."

This transformation has elevated the accuracy of work and set ASC Flatpacks apart as a leader in the industry.

Game-Changing Features: 3D Preview Tool and Benchtop Specifier One standout feature that has revolutionised Andrew's workflow is Cabinetry.Online's 3D Product Visualiser. “A client orders a 300mm wide cupboard and puts 2 doors on it, they'll look at it instantly and go, that looks silly. The 3D preview helps them visualise what they’re ordering”.

This tool allows clients to see

their designs in real-time but also helps them make informed decisions about dimensions, cabinet composition, and overall aesthetics.

Another invaluable feature is the Benchtop Specifier. “The benchtop ordering component is so good, just for the clients to visualise and go, I guess it does need to be seen on that end and that's the way I want my join". It allows clients to customise benchtops down to the last detail, streamlining the process, eliminating guesswork, and reducing the potential for mistakes.

Exceptional Support and Service Andrew commends the support of the Cabinetry.Online team.

"The support is amazing. Every time we put information into the portal or a ticket, they get replied to very quickly. I can't think of anything that we've put in on a job that's a problem that hasn't been sorted out".

JOINERS Magazine December 2024 page 70

Andrew particularly appreciates the ticketing system and remote support. "Sometimes we just leave them to it, walk away and come back and there's an email or a message saying you're good to go.

It's fantastic". This level of support allows ASC Flatpacks to maintain a high standard of service and keep operations running smoothly.

Growth and Future Plans Andrew’s journey is inspirational.

His strategic decisions, bolstered b y C a b i n e t r y. O n l i n e , h a v e paved the way for a future full of potential. ASC Flatpacks is prepared to double, even triple, its output. “It's just a win every which way I look.”

“We are now signing on with an advertising agency to focus on social media and Google ads to chase even more opportunities.

My goal is to at least double our output, and I can see us comfortably handling triple the current workload with our new setup”.

Andrew Steel's story showcases the power of innovation and strategic planning. If you see parallels in Andrew's journey with your own, it’s time to explore what Cabinetry.Online can do for you.

Contact Cabinetry.Online today to discuss how their technology can transform your business.

09 973 2566 hello@cabinetryonline.co

JOINERS Magazine December 2024 page 71

Ensuring everyone returns home safely An average person spends more than 90,000 hours at work in their lifetime!* Based on this, it is no surprise why colleagues often feel like family members, making safety for ourselves and team members even more important.

Everyone wants their colleagues, their friends, their family to return home safely each day. Every site and every team operate through their own different processes but we felt it’s important to share a recent safety story and some of the questions we regularly ask within our business in the hope that our learnings may be useful to other teams.

Recently one of our delivery drivers was involved in a high potential near-miss at a customer’s site. While our team member was engaged in conversation with a customer, another truck reversed into the same space, making contact with our driver’s head and shoulder area. Neither individual was seriously injured due to luck, one inch over could have had a very different outcome. How do we remove the risk of recurrence of such an incident that could have serious consequences?

As a business Laminex review near misses to learn and change how we do things to prevent the same situation from happening again. A key to the success is collaboration between all involved parties. As such, a review occurred with our customer and the truck drivers company involved and we looked at whether there were actions that could have been taken to avoid this incident. As a result of this review, the customer engaged with the other tenants to improve traffic management controls on the premise.

Complacency comes as a common root cause in many

Nielsen. (2015). Health and safety attitudes and behaviours in the New Zealand workforce: A study of workers and employers.

2014 Qualitative Research. Construction report. (A report to WorkSafe New Zealand). Wellington, New Zealand.

incidents, particularly when we’ve become too accustomed to the repetitive nature of tasks, leading to underestimating the risks involved.

In 2015, Worksafe undertook a study around attitudes and behaviours of the NZ workforce.

Through qualitative research involving 97 in-depth interviews, they created a typology to plot the different industries. (see above).

Where do you think your business sits within this model? Most importantly, where do your employees think the business sits and why?

Current Data from ACC shows manufacturing as the second highest industry in terms of workrelated claims. The 2015 study reveals that “In Manufacturing, Health and Safety is not a top of

JOINERS Magazine December 2024 page 72

mind concern and few see their job as risky. Dangers are largely seen to be mitigated by common sense, machine guarding and processes.”

The question is, if manufacturing jobs are not risky, why are there so many work injury claims per year? Would risk perception and complacency play a part in this?

Focusing on less, and what’s critical, can be key to a successful outcome, especially when we return from the holidays. Below are some questions related to the risks that can seriously harm our teams.

Machine safety • When machine safety risks are present, how well guarded is the processing machinery?

• Is there a process for isolating machinery and prevent

•

it from being energised while performing tasks or maintenance on it?

Does the team understand the importance of following processes for their and their team’s own safety?

Vehicle risks • Is the traffic management plan, including traffic flow signage clear? Entry/exit signage including speed limits– are they clear, legible, still in good condition?

• Does everyone know the process for unloading and loading trucks?

• Do your forklift operators wait until truck drivers are out of the way and in a safe zone?

• Is there designated safe zone for drivers to wait at?

• Are all employees aware and reminded of the separation

Incidence rates for work-related injury claims, by selected industries, 2017–2023 (per 1,000 Full time employees). Data source ACC.

We’ll be giving away a free 12 months subscription courtesy of 3D Kitchen™ with every issue of JOINERS Magazine!

In 2023, the industries with the highest incidence rate of work-related claims were: manufacturing – 151 claims per 1,000 FTEs; agriculture, forestry, and fishing – 149 claims per 1,000 FTEs; construction – 127 claims per 1,000 FTEs. Data source: Stats NZ.

•

distance between pedestrians and mobile plant?

Are forklift operators aware of the need to use a seatbelt?

Have you considered interlocking the seatbelt to the ignition to help build the habit?

Hazard Identification and Risk Assessment: • When a non-routine task or situation arises, do you always start with a ‘Take5’ or risk assessment to identify hazards and risks, plan around these and get the best / safest outcome possible?

• When serious risks are identified, does the team communicate it to their supervisor or manager?

• How do you manage and eliminate the risk from onsite visitors/drivers?

• How do you ensure

•

that subcontractors are identifying and managing workplace hazards once underway?

What controls have you put in place before you start work?

When your team resumes work from the holidays? (i.e. is there a toolbox talk to remind them of the safety protocols)

What would the impact of a death or injury do within your business?

How would you feel having to make the call to explain to the family/partner?

We hope this story has shared something that would be useful to your business. *Statistic from Harvard Business Review

Our thanks to Laminex NZ for providing this article.

JOINERS Magazine December 2024 page 73

Backing the future Andrew Bellamy reflects on achievements in the joinery industry

A

ndrew Bellamy, General Manager at Wood Solutions, has been leading the charge for training in the joinery trade for more than a decade. As a member, and in recent years, Chair, of the BCITO National Advisory Group (NAG) for joinery, he’s worked tirelessly to ensure that industry training meets the evolving needs of the sector.

Having recently won the prestigious Ken Monk Award, w h i c h h o n o u r s A n d r e w ’s contributions to the industry, it’s worth stopping to acknowledge exactly how much has been achieved through his work with Master Joiners, BCITO and its predecessor, JITO. Andrew first joined the NAG about 13 years ago, sparked by a passion for training and a desire to give back to the industry. Throughout that time, he’s been instrumental in seeing qualifications revised to better align with industry requirements, ensuring that apprentices receive relevant, high-quality training that matches the demands of today’s joinery practices.

Through his involvement with the NAG and the Master Joiners Association, Andrew has campaigned to raise awareness of the needs of under represented groups, from ethnic minorities to women. Having hired his first female employee 23 years ago, Andrew has been a strong ambassador for employing women in what has traditionally been a male-dominated industry.

“One-third of our business’s workforce is female, and some of our best-performing employees are women. It has been incredibly rewarding to see our female apprentices succeed in this space, including our apprentice Annie Theewis, who was the first BCITO Apprentice Leader, advocating for other joinery apprentices across

Andrew Bellamy accepting the Ken Monk Award in recognition of many years of service to the industry.

the country. Although the trade is evolving, it’s still a traditionally male-dominated space and I encourage other employers to look at hiring more women,” he says.

A t a n y g i v e n t i m e , Wo o d Solutions has between two and four apprentices in training. Yet Andrew still has time to also promote mental health, a constant challenge for the trade, and his other love, sustainability.

“Climate change is something I’ve always been passionate about, and being able to build something that will last for generations in such a disposable world is inspiring,” he says. At Wood Solutions, he introduced a cutting-edge dual extraction system to cut down on waste, separating wood shavings from dust to supply local farms with environmentally-friendly animal bedding.

These are all reasons why Andrew’s award win in September came as no surprise to anyone except him.

JOINERS Magazine December 2024 page 74

“It was quite humbling to receive the Ken Monk Award,” Andrew says. “I was fortunate to know Ken quite well through his mentorship in my early years and it’s incredible to see the drive coming through in his son, Jarrod. This award is a massive honour, but it’s not why I do these things. It’s about ensuring the next generation is equipped to succeed.”

However, the future potentially holds something very different.

Andrew is pursuing an exciting opportunity to travel to Antarctica in a hands-on construction role that will see him return to his roots in the trade.

"It's an opportunity to get back on the tools, something I've always enjoyed. The chance to experience the untouched wilderness of Antarctica is something I couldn't pass up," he says. At the time of writing, he was awaiting go-ahead for the trip. He’d be away for eight months – something that has the full support of his family.

Despite the adventure ahead, Andrew remains committed to the joinery industry and his role in the NAG. "I've talked about Zooming in from Antarctica," he jokes. "This industry is a part of who I am, and once I'm back, I’ll definitely be involved in some shape or form."

“Being surrounded by inspiring people who you enjoy working with motivates you to be the best version of yourself, and this has been reinforced through the unwavering support I’ve experienced as part of the BCITO NAGs. Everyone has a common goal to make training better across the industry which people undervalue. Training isn’t for today, it’s for the future.” 

BC TO Joiners.

Join us. bcito.org.nz New Zealand’s leading building site.

JOINERS Magazine December 2024 page 75

NKBA announce best kitchen & best bathroom award winners On Friday, 6 September the NKBA Excellence in Design Awards celebrated the best kitchens and bathrooms in New Zealand.

The Supreme Kitchen Design award went to Leonie Hamill of Cube Dentro for her "Oceanside Residence" project in Auckland.

This modern family kitchen, designed for intergenerational living, was praised for its strong family values and clever layout

that accommodates multiple cooks. The judges highlighted its beautiful design, exceptional detailing, and functionality.

The Supreme Bathroom Design award was won by Georgia Langridge of Modi Design for her "Parisian Stay" project in Christchurch. This bathroom was noted for its unique features, stunning materials, and the balance between masculine and feminine elements.

Oceanside Residence

Davinia Sutton President of the NKBA with Best Kitchen winner Leonie Hamill from Cube Dentro in Auckland.

JOINERS Magazine December 2024 page 76

The judges commended the design for its luxurious materials, interesting features like the bath and walk-in shower, and the way it allows for both communication and solitude.

The NKBA Excellence in Design Awards celebrate the exceptional talent and creativity of New Zealand's kitchen and bathroom designers. The awards not only elevate industry standards but also inspire and encourage innovation.

Parisian Stay

Davinia Sutton President of the NKBA with Best Bathroom winner Georgia Langridge of Modi Design in Christchurch.

The NKBA Excellence in Design Awards showcase the best projects, setting a benchmark for quality and creativity that we can all aspire to. They play a crucial role in promoting and celebrating the hard work and dedication of our talented designers, ultimately contributing to the growth and advancement of our industry. 

2024 a year of growth & excellence A s we wrap up 2024, the National Kitchen & Bathroom Association (NKBA) reflects on a year marked by significant achievements. This year has been a testament to our commitment to enhancing the kitchen and bathroom industry, fostering professional growth, and promoting excellence in design.

of the New Zealand Diploma in Kitchen Design and to begin development of the New Zealand Diploma in Bathroom Design, which we are aiming to deliver in 2025. These initiatives provide valuable learning opportunities and reinforce our commitment to maintaining high standards within the industry.

Additionally, we welcomed a new staff member to our team this year.

The introduction of Ally Kulpe was a significant milestone, as she brings fresh perspectives and marketing and event expertise to our organisation. The addition of Ally has further strengthened our team and enhanced our ability to serve our members effectively.

One of the standouts of 2024 was the successful implementation of robust policies and processes, which have streamlined our operations and improved member services. We also revamped our website, introducing new features such as event registration, profile management, CPD points tracking, and access to membersonly content, including regular webinars.

The NKBA Excellence in Design Awards was another highlight of the year. This prestigious event was held at the Auckland Town Hall and celebrated outstanding achievements in design, showcasing the superior quality of work of New Zealand designers and manufacturers. The event was a resounding success, thanks to the hard work and dedication of our members, sponsors and Head Office team.

As we look forward to 2025, we remain committed to fostering a supportive environment for the kitchen and bathroom industry in New Zealand. We extend our heartfelt gratitude to our members, sponsors, and the entire NKBA community for their unwavering support and contributions.

Together, we will continue to achieve great things.

Our dedication to education and professional development was evident through the introduction of a suite of design workshops. We have also worked with BCITO to undertake a comprehensive review

We released the second volume of the NKBA Excellence in Design Publication in July. This premium 200-page guide highlights the talents of our members and the

The NKBA 2024 Conference was strongly supported by membership.

exceptional quality of their work.

It has been distributed to NKBA members and the design and construction industry.

Our marketing efforts have also paid off, with a focus on growing brand recognition of NKBA in New Zealand and promoting our members as skilled and professional. This has helped us strengthen our position as a leading authority in the kitchen and bathroom industry.

Visit nkba.org.nz or contact info@ nkba.org.nz to learn more about NKBA.

2QNTCKX

$XVWUDOLD 1HZ =HDODQGoV OHDGLQJ

5(029$%/( /$%(/6 0DQXIDFWXUHU IRU WKH &DELQHWU\ QGXVWU\ VWU\ -RLQHU\ ,QGXVWU\

DOODERXWODEHOV FRP DX FDELQHWU\ODEHOV#DOODERXWODEHOV FRP DX

JOINERS Magazine December 2024 page 77

Reflect, Reset, & Recharge planning for a successful year

A Steering a course Ian Featherstone

Ian Featherstone is a cabinetmaker, business advisor, mentor and leadership coach. Glass Half Full provides tailored solutions to lift performance and drive growth. Ian specialises in the construction industry, particularly the joinery & cabinetry sector.

For more information or to find out how you can move your team forward, please visit www. glasshalffull.co.nz

s the year draws to a close, it’s easy to get swept up by deadlines and commitments. Yet for joinery business owners, this is the perfect time to pause, reflect, and strategise for the year ahead.

Evaluating your performance and setting new goals can lead to better customer experiences and a more engaged, motivated team.

As customer service expert Shep Hyken famously stated, “To be the best place to buy at, be the best place to work at.” This powerful insight underscores the value of focusing equally on customer satisfaction and team culture.

3.

4.

Reflecting on the Past Year Start by evaluating the past year’s wins, challenges, and key lessons: • • •

Successes: What goals did you achieve, and what drove these results?

Challenges: Where did you struggle, and what can you learn from these obstacles?

Market Trends: Did industry changes, changes in customer preferences or emerging industry technologies impact your business?

Boosting Team Engagement To create exceptional customer experiences, start with your team.

Engaged employees are key to building a positive, productive workplace culture. Here are some strategies to increase engagement: 1.

Use these insights as a foundation to build your strategy for the year ahead.

Enhancing the Customer Experience Your customer’s experience can make or break your business.

When customers feel valued throughout their journey, from the initial inquiry to after-sale support, it creates loyalty and builds a strong reputation. Consider these ways to improve your customer’s experience.

1.

2.

Effective Communication: Customers value responsiveness and transparency.

Equip your team with tools to ensure prompt updates and clear communication.

Personalisation: Tailor services to individual customer needs and project prefer-

ences. Offering personalised recommendations or custom solutions can make all the difference.

Act on Feedback: Encourage feedback through surveys, reviews, or in-person discussions. Implementing customer suggestions and improving your processes shows you care about their experience. Lead your team to keep lifting the bar.

Consistent Quality: Focus on delivering consistently high standards using quality materials and thorough comprehensive training.

Quality work speaks for itself and keeps clients coming back.

2.

3.

4.

Encourage Open Communication: Foster a workplace culture where employees feel comfortable sharing ideas and feedback through regular team meetings, one-on-one check-ins, and anonymous channels.

Invest in Training: Professional development and upskilling show that you value your employees’ growth.

Provide training in both technical and soft skills to strengthen their capabilities.

Recognise Contributions: Recognition boosts morale and motivation. From small thank-you notes to team celebrations or bonuses, acknowledge your team’s hard work.

I n v o l v e t h e Te a m i n Planning: Empowering employees to contribute to company goal setting, builds ownership. When they see how their work aligns with the company’s growth,

they become more engaged, motivated, and much more likely to adapt to the new approach.

Applying Hyken’s philosophy "creating a great place to work” naturally leads to a better customer experience, as satisfied employees go the extra mile.

Setting Goals for the New Year Create clear, achievable goals for your business. Balance broad goals, such as expanding market share, with specific targets, like improving customer satisfaction and improving productivity.

To ensure success: • Break down large goals into manageable steps with deadlines.

• Assign responsibility to specific team members for each goal.

• Monitor progress regularly and be flexible enough to make adjustments. A good plan is a flexible plan.

A brief visual roadmap helps keep everyone aligned, agile, and ready to adapt to changing conditions.

Embrace New Opportunities As you reflect and plan, consider new opportunities. For instance, adopting new technology (software, task workflow, as well as machinery) can improve production efficiency, while sustainability practices align with growing demands for eco-friendly solutions.

Conclusion Taking time to reflect and plan positions your business for a successful and prosperous future.

Focusing on team engagement and customer satisfaction, will transform your business into 'the best place to buy at and work at.'

Every effort to build a thriving workplace culture and prioritise exceptional customer experiences strengthens both your brand and your bottom line. 

JOINERS Magazine December 2024 page 78

CNC operators Andrew Leckie & Phil Harris found the Jacks training and support exactly what they needed in becoming familiar with the new KDT.

Calder Stewart A legacy of craftsmanship meets CNC precision

I

n New Zealand’s competitive industrial and commercial markets, Calder Stewart has earned its reputation as a trusted leader in property development and building solutions. With a proud history as a family-owned business that started in 1955 in Milton, Calder Stewart has grown its team to around 450, delivering projects that range from intricate local builds to major national developments. Today, Calder Stewart’s extensive services span an impressive land portfolio, end-to-end property services, design-build solutions, as well as manufacturing and construction services across the country.

To meet the demands of complex large-scale projects, Calder Stewart recently made the decision to invest in a state-of-the-art CNC. The machine, manufactured by KDT - one of the world’s largest and most advanced producers of CNC machinery - was chosen for its quality, functionality and the assurance of meeting

New Zealand’s stringent safety standards. “We could have bought a CNC directly from China at a much cheaper price,” says Senior Maintenance Coordinator Sam McKay. “But we wanted a machine that met all the NZ safety standards and had local support.”

This decision came after the team realised the unique needs of CNC equipment compared to simpler machinery they could “chuck timber through.” With numerous moving parts and a significant software component - a CNC machine requires both reliability and dependable local support.

From installation to training, the Jacks team played a critical role in ensuring the whole process was smooth and efficient. “The Jacks technician was really focused on us during training, making sure we understood and were comfortable with the features of the machine,” says Phil, the CNC operator. “Even when we had a question a few weeks after training, we could just call and

get the support we needed.” This level of accessible expert support has proven essential in keeping projects on schedule and avoiding unnecessary downtime.

The KDT CNC has quickly become a vital tool in Calder Stewart’s workshop, allowing them to complete a wide range of tasks, from stair stringers and ply boxing to cabinetry, vision panels in doors and louvre work. Equipped with workpiece hold-down rollers, the machine provides stability and precision even with challenging materials like plywood and stair stringers.

“I push the button and walk away,” adds Phil, underscoring the machine’s efficiency and ease of use.

With the KDT CNC, Calder Stewart has seen significant efficiency gains, already halving production times on many jobs.

As operators continue to master the design software, they’re expecting to cut project times

to just a third of what they once were. This investment in a CNC solution from Jacks has not only streamlined operations but has also proven to be a wise choice for Calder Stewart’s long-term goals.

“Knowing what we do now, we made the right decision to partner with Jacks and not go it alone,” say Sam and Phil. “It would have been a nightmare otherwise.”

With their new CNC capabilities, Calder Stewart is well-positioned to continue their legacy of delivering some of New Zealand’s most ambitious and complex projects - bringing precision, speed, and versatility to every build.

The KDT range of machinery is sold and serviced in NZ by Jacks. www.jacks.co.nz

JOINERS Magazine December 2024 page 79

STATE OF THE INDUSTRY Reports from Branch Presidents November 2024

AUCKLAND / NORTHLAND We had another good turnout at our meeting in September with positive signs of engagement and interest from the members talking about current topics and issues in the marketplace. We would like to thank ITI Timspec for the hospitality and hosting a successful meeting.

In late September, the Master Joiners Conference and Awards were held. It was fantastic to see the large number of entries from the Auckland region. Big Congratulations to Cube Dentro for winning, Best in Region, Best Kitchen Design by InHouse Design and Best Kitchen Over $50k along with Grandvue Joinery for winning, Best Door or Window, Best Timber Project, and Best Creative Use of Timber.

Grandvue Joinery ended the night by winning the overall Supreme Award, adding to their collection of awards.

We are at that time of the year again navigating the Christmas rush. Most members are reporting having their order books full before Christmas and leading into 2025.

There is also a positive feeling for 2025 with the amount of pricing that is currently happening.

Looking forward to our Go Carting for some competitive teams racing at the end of November along with our next Master Joiners meeting hosted by Machines R Us, allowing us to catch up with the latest machinery. Not forgetting celebrating the end of the year with our members and suppliers.

- Rob Pickup CANTERBURY That time of year again where historically the workload goes crazy and everyone wants their joinery by Xmas, however that’s not the case this year, for most we are a lot quieter than normal heading into Xmas and the new year. Sales/pricing seems to be busier, but the vibe is that it will still be deep into next year before workload is consistently busier.

Re pricing, we are unfortunately seeing a few joinery companies submitting some very low pricing that most query how it’s possible to cover costs with, aka buying their work. This is not good for our industry at all and in turn is very dangerous for their own companies, and we can only hope our suppliers aren’t supporting these companies that are doing this to our industry. I have heard of quite a few large commercial projects of late that have been sharply priced but then beaten by ridiculous amounts, when these companies come to doing the work and paying for there materials it will be interesting to see what happens, and again hopefully our suppliers don’t go acting as banks to help them. There are quite a few joinery companies very upset with this happening.

Coming into the new year I’d be worried about how some come through the Xmas break and then face paying the likes of GST, provisional, income tax & FBT all in a relatively short period, and in most cases a month with no earnings due to a Xmas break, I feel our suppliers especially may see the negative impact of this and see an increase in slower payers, or worse, so something to be weary of.

Finding staff is a bit easier now, but finding skilled / experienced staff is still proving to be difficult, members are advertising but finding little, the applicants are not up to what is needed.

Health & safety wise, Work Safe are very active, especially targeting air contamination / dust, using a broom to sweep your factory floor is something they are trying to have stopped.

Monthly meetings are still going well, we have our final one this November followed by our local apprentice awards.

All the best for the Xmas run & break. Yours sincerely - Nathan Moore

JOINERS Magazine December 2024 page 80

CENTRAL Central Region finished our events off this year with a Quiz Night on the 1st of November. It was a fantastic night attended by just over 60 people. I would like to thank our generous supply partners for helping to sponsor this event. It wouldn’t have been possible without you. Fun and laughter dominated the night. It was a great way to end the year.

Most members are still feeling that it is a bit slow for this time of the year. Once again it isn’t going to be the crazy rush into the holidays as it is generally known to been.

The enquiry rate for quotes and tenders is increasing and next year is looking positive for our region.

Renovation clients are slowly returning to the market, which is great to see.

Conference this year was great. I enjoyed meeting more members from around the country. Each year I make it my goal to talk to unfamiliar faces and get more confidence in bigger crowds. The Canterbury members were all very welcoming and it was cool to attend one of their meetings while I was in the region the following week.

As I always do, I want to touch on mental health. Don’t be afraid to reach out to your local members for support if you are doing it tough. It doesn’t make you weak.

I had a few moments in the past month where I wasn’t ok. Yes, I have my family and friends for support, but sometimes you need to talk to different people.

I got in contact and talked with a local member as well as one of my fellow Executives. If you are reading this, you know who you are. Thank you for being there – it meant the world to me and helped a lot.

I hope this year has brought you all success and happiness. Please be safe while travelling around these holidays. I look forward to catching up with you in 2025. Kristine Holmes

HAWKES BAY / POVERTY BAY The sunny Hawkes Bay is steady with workflow leading up to the Christmas period. There is an obvious slow down this quarter, but still enough to keep everyone busy. The intake of projects for 2025 seems to be good and more confidence has entered the market with interest rate cuts recently.

Wishing everyone a Merry Christmas and a well-earned break. - Robin Holthusen TARANAKI Well, it’s that time of year again, to write another report for November running into Christmas. This year has flown past, and we are now into the Christmas period and thinking about forward planning into the New Year. From my perspective its been a touch and go year work wise, with our fair share of challenges.

Like most regions Taranaki is feeling the pinch of a lack of work. After a couple of phone calls to members of different areas of Taranaki, most are feeling confident that things are starting to pick up, with more inquires and feeling of hopefulness in the air.

Staffing levels seem to be fine with most at the right level for this time of year.

Still not of lot of new builds going on, but there does seem to be a lot of renovation work and small jobs around. The commercial sector seems to be steady too and there seems to be more plans out there getting prices at the moment, and we can look forward to that work keeping us busy in 2025.

Generally materials are readily available with most supplies being sent out smartly and most suppliers seem to be well stocked, so little to no wait times, which we appreciate.

We have one long standing member Dan Holmes, who sold this business and is retiring at end of December, so we wish him a

underway with local high schools.

This has proved to be a successful pathway for students to experience joinery and cabinetmaking in a practical hands-on way and for our Members to showcase what a career in our industry can look like. Drop me a line if you are interested in participating. We will be looking for Member businesses where the Interns can gain work experience in school holidays through the year.

Awards Dinner, Christchurch.

happy retirement and thank him for his service to our sector over many years.

So, roll on Summer, to nice long days, relaxation and good weather.

Let’s hope for more sunny days as we head into summer and the odd tropical storm of course. Be kind and stay safe. - Bryan Frank WAIKATO / BOP We are on the home run now with end of year deadlines looming.

Some members and associated industry partners are still experiencing patchy workloads but overall the outlook is looking positive going into 2025.

Our final event for the year was our annual golf day. This year it was held at Te Kowhai Golf Club followed by dinner, drinks and darts at the pub next door. The winner of the trophy this year was HK Kitchens. Thanks to Blum and Impeys for their support of this event.

Planning is underway for our 2025 meetings and events schedule.

Look out for details on the Master Joiners website and be sure to get yourself and your Team onto the Waikato/BOP contact list for regular updates. First up will be the Ken Monk Fishing Day in Coromandel early March.

Always a popular day out for the Members.

The Internship Programme will be run again this year with planning

EUROPEAN QUALITY IN STOCK! INSTALLED IN OVER 500 BUSINESSES IN NZ, IN THE LAST 10 YEARS

But for now it’s all go to get those projects out before Christmas.

Remember to celebrate the accomplishments of the year, whatever that may look like to you and enjoy a good break to re-energise for 2025. Wishing you all the best. - Cherie van der Poel WAITAKI Workload - out of the firms that have emailed back, all are steady at present a couple are quiet and one is really busy, most are expecting next year to take off again.

Staff - one firm has taken on two new staff members however all others have stated that they are still at the same staff level as the last SOI report and are not looking for any additional staff at present.

Material - no one has any issues with materials; however, most have raised the fact that they are still seeing price increases.

Finances - everyone is reporting that they are up to date and have no issues, some are saying that they have noticed that people are a lot slower paying their accounts at the moment.

General - most firms are saying that they are steady but could do with more work and are hopeful that things will take off in the early new year now that interest rates are falling, Time will tell, hopefully 2025 will be a busy year.

Kind regards - Warren Atwill DUST FILTRATION MANAGEMENT



FANS

DUCTING

FUME MANAGEMENT

FLEX

Freephone 0508 NZ DUCT (0508 69 38 28) 13F Saleyards Road, Otahuhu, Auckland P: 09 276 8020 F: 09 276 8070 E: info@nzduct.co.nz

www.nzduct.co.nz JOINERS Magazine December 2024 page 81 PC14700 Joiners Wall Planner Ad 90x267.indd 1

4/10/22 2:56 PM

master joiners Chief Executive - Allison Delaney, PO Box 12322, Thorndon, Wellington 6011. p: 04 471 1133, e: support@masterjoiners.co.nz, accounts@masterjoiners.co.nz

AUCKLAND Advanced Timber Joinery PO Box 132, Silverdale, 217 Spur Road, Stillwater/Silverdale, Ph 09 426 9785, contact Wade Saunderson. NZS4211 Affiliated.

All Timber Joinery (2017) Ltd Unit A, 1058 Great South Road, Mt Wellington, Auckland. Ph 09 270 9605, contact Rory Johns.

NZS4211 Affiliated.

Alpha Joinery Services (2010) Ltd 124D Felton Mathew Ave, St Johns, Auckland, Ph 09 578 0391, contact Juan Whippy. NZS4211 Affiliated.

Art Deco Interior Ltd 6 Grayson Avenue, Papatoetoe 2104, ph 09 218 8079, contact Sam Ju. Auckland Joinery (2014) Ltd 2 Taylors Road, Morningside, Auckland, Ph 09 846 0346, contact Ross Webster. NZS4211 Affiliated.

Aurora Australis Interior 3/184 Mcleod Rd Te Atatu Sth, 0610.

Contact Amanda Yuan 021 688 901.

BML Builders Ltd 18 Shamrock Drive, Kumeu, Ph 09 412 2350, contact Kaye Butler. NZS4211 Affiliated.

Canam Joinery Ltd 196 Swanson Rd, Henderson, Auckland. Ph 09 836 0732, contact Angus Welton.

Carlielle Kitchens 138 Manukau Road, Pukekohe, Auckland 2120, Ph 09 238 5222, contact Doug McMiken.

Cedarlite Industries Ltd 4 Mahunga Dr, Mangere Bridge, Auckland, Ph 09 633 0410, contact John Harrison. NZS4211 Affiliated.

Continental Stairs Ltd 32 Waipareira Ave, Henderson, Auckland, ph 09 836 1935, contact John or Anthony van Erp. Counties Joinery 36 Sedgebrook Rd, Patumahoe, RD 1, Pukekohe 2678. Ph 09 236 3271, contact Roy McKerras NZS4211 Affiliated.

Craftsman Cabinets Ltd 140 Patumahoe Rd, Pukekohe, 2678. Ph 021 225 3460, contact Jason Michie.

CT Timber Joinery Ltd 42 View Rd, Wairau Valley, Auckland, Ph 09 444 9041, contact Geoff Knight. NZS4211 Affiliated.

Cube Dentro 8 Tironui Station Rd, West Takanini, Auckland. Ph 09 297 7830, contact Leonie Hamill.

Cutting Innovations Ltd 70 The Concourse, Henderson, Auckland 0610, Ph 09 836 9050, contact Alec Stringer Dando Doors and Windows Ltd 62 Stoddard Rd, Mt Roskill. Ph 09 629 0222, contact Peter Facoory. NZS4211 Affiliated.

Danska Cabinetmaking Unit 5, 56 Rewarewa Rd, Raumanga, Whangarei, ph 09 438 1100, contact Aaron & Carolyn Rawson.

Design Timber Doors & Windows Ltd 118 Mangere Road, Otahuhu, Auckland, Ph 021 0868 6770, contact Sailesh Prakash. NZS4211 Affiliated.

Divine Design Ltd (T/A JDC Cabinets) 14 Alfred St, Onehunga, Auckland 2012. ph 09 622 1912, contact Julie Todd.

Doorways (2009) Ltd 428 Church St East, Penrose, Auckland, Ph 09 571 0605, contact Neville Shirley. NZS4211 Affiliated.

Euro Timber Joinery Co Ltd 34 Waipareira Ave, Henderson, Auckland, ph 09 837 1833, contact Shane Paterson. NZS4211 Affiliated.

F&R Home Improvements 79 Ellice Rd, Wairau Valley, Auckland. Ph 09 944 4962, contact Frank Ren. Fabulous Kitchens 52 Rangi Rd, Takanini, Auckland. Ph 09 268 2299, contact Ming Feng.

Fineline Joinery Limited 4 Corban Avenue, Henderson, Auckland, Ph 09 836 2212, contact Richard Schaefer. NZS4211 Affiliated.

Geoff Locke Cabinetmaker Ltd 67 Hodge Road, R D 6, Ruatangata, Whangarei 0176, Ph 09 433 5745, contact Geoff Locke.

Goldfinch Timber Joinery Ltd 20 D & E Onslow Avenue, Papatoetoe, Auckland, Ph 09 277 8803, contact Harvey Whitehead.

NZS4211 Affiliated Grandvue Joinery 42 Gregory Road, Waitakere. Ph 09 810 9398, contact Robert Piacun. NZS4211 Affiliated.

G & J Joinery (1997) Ltd 372 West Coast Rd, Glen Eden, Auckland. Ph 09 818 5585, contact Alan Parry. NZS4211 Affiliated.

McNaughton Windows and Doors 42 Frost Rd, Mt Roskill, Auckland. Ph 09 620 9059, contact Andrew Riley or Dave Cunningham.

NZS4211 Affiliated.

Neo Design Ltd 96 Hillside Road, Glenfield, Auckland. Ph 09 443 4461, contact Wayne Church or Paul Burgess.

Next Level Joinery Ltd 7 Goldfield, Wairau Valley, Auckland. Ph 09 600 2726, contact Brendon Sowerby. NZS4211 Affiliated.

Nicks Timber Joinery Ltd 56 Forge Road, Silverdale, Auckland. Ph 09 426 6862, contact Ken Caldwell. NZS4211 Affiliated.

Owairoa Joinery Ltd 9 Carpenter Rd, East Tamaki, Auckland. Ph 09 273 3699, contact Nigel Walker. NZS4211 Affiliated.

Papakura Joinery Ltd 45-51 Tironui Road, Papakura North, Auckland, Ph 09 298 7145, contact Glenn Haszard. NZS4211 Affiliated.

Popular Cabinets Ltd (T/A Popular Kitchens), 12 Rylock Plc, Papakura Heights, Auckland, 2140, ph 09 576 6358, contact Sherry Shi. Regal Plus Joinery Ltd 35 Commerce Street, Whangarei, Ph 09 438 2989, contact Jason Hammond.

Rockfield Woodworkers (2003) Ltd 9 Parkwood Place, East Tamaki, Manukau, Ph 09 274 4698, contacts Bryan Hancock and Nick Jones. NZS4211 Affiliated.

WAIKATO BAY OF PLENTY Adapt Kitchens 52a Hewletts Rd, Mt Maunganui. Ph 021 156 9960, contact Andrew Dagger.

Advance Joinery 2015 Ltd 71 Higgins Road, Hamilton, Ph 07 846 0026, contact Kris Allen.

Artisan Carpentry Ltd 747 No2 Road, R D 2, Te Puke 3182, Ph 027 344 1918, contact Charles de Lapomarede Autocrat Joinery 31 Maru Street, Mount Maunganui, Ph 07 574 8162, contact Steve O’Donohoe. NZS4211 Affiliated.

Classical Doors Ltd Cnr Chadwick Rd & Sherson St, Tauranga, Ph 07 578 4908, contact Scott Wilkins. NZS4211 Affiliated.

Clearline Ltd 65 Hull Road, Mt Maunganui, Ph 07 572 4307, contact Barry Ririnui. NZS4211 Affiliated.

CM Joinery Ltd 201 Bowman Rd, RD 9, Hamilton. Contact Craig Mackie, 022 585 6788.

Colourform Joinery 1/28 Kaimiro St, Pukete Industrial Estate, Hamilton, Ph 07 849 6655, contact Jo Clegg.

NZS4211 Affiliated.

Concept Kitchens & Bathrooms Ltd 73 Riverlea Rd, Hamilton, Ph 07 856 4705, contact Ross Bones.

Heritage Joinery Ltd 1007 Paerata Road, Paerata, Pukekohe. Ph 09 239 2794, contact Michael Oglesby.

Smith & Parker Joiners 35 Waipanga Road, Kamo, Whangarei, Ph 09 435 5415, contact Albert Smith or Simon Parker.

NZS4211 Affiliated.

Hewe Architectural Cabinetry 10 Triton Drive, Albany, Auckland 0632, Ph 09 479 6504, contacts Tony Hewetson or Craig Hewetson.

Southey and Knight Group Ltd 258a Roscommon Rd, Wiri, Auckland. Ph 022 455 9975, contact Ryan Southey. NZS4211 Affiliated.

Cromptons Joinery & Laminates Ltd PO Box 751, Taupo. Ph 07 378 7968, contact Allan Crompton. NZS4211 Affiliated.

Haydn & Rollett Ltd 1 Warehouse Way, Northcote, Auckland 0627. Ph 09 443 8315, contact Christopher Hartley.

Timber Joinery Solutions Ltd 1007 Tauhoa Road, R D 4, Warkworth, Auckland, Ph 09 422 5873, Contact Dave Sattler. NZS4211 Affiliated.

Customtone Kitchens 33 Progress Drive, Otorohanga, Ph 07 873 8083, contact George van Boven.

Kay Joinery 1226 Oruru Road, R D 2, Peria, Kaitaia, Ph 09 408 5547, contact Daniel Kay. NZS4211 Affiliated.

Kitchen Dynamics Limited 17 Martyn St, Waiuku, Auckland, Ph 09 235 0252, contact Colin Drummond.

Kiwi Carpentry 131 Quarry Rd, Kaitaia, Northland 0482. Ph 021 0278 9544, contact Andrew Bennie.

Legacy Joinery 34a Leonard Rd, Mt Wellington, Auckland. Ph 09 953 1465, contact Graham O”Neill. NZS4211 Affiliated.

Leslie A J & Co Ltd 6/95 Ellice Rd, Wairau Valley, Auckland. Ph 09 479 4662, contact Steve Leslie. NZS4211 Affiliated.

Mahurangi Joinery Ltd 23a Glenmore Drive, Warkworth, Auckland 0910, Ph 09 425 9849, contacts Joel and Suzannah Hemus. NZS4211 Affiliated.

Matakana Kitchens & Joinery Ltd 50 Matakana Valley Road, Matakana, Ph 09 422 7804, contact Jeffrey Smith. NZS4211 Affiliated.

JOINERS Magazine December 2024 page 82

Total Timba Joinery 227 Archers Rd, Glenfield, North Shore. Ph 09 444 7772 contact Rob Pickup. NZS4211 Affiliated.

Creative Kitchens & Stone 35 Miro St, Taupo. Ph 07 378 0619, contact Ahmad Zammit.

Designline Limited 21 Gateway Drive, R D 4, Whakatane, Ph 07 307 0058, contacts Hayden and Rachel Boyd.

VSP Interiors Limited 36 Parkway Drive, Mairangi Bay Auckland, Ph 021 183 9151, contact Vishal.

TS Industries Ltd t/a Fernlea Cabinetry & Joinery Unit 3, 593 Te Rapa Road, Hamilton, Ph 027 505 3480, contact Stefan Brown. NZS4211 Affiliated.

Westpine Joinery Ltd 7 Binstead Rd, New Lynn, Auckland. Ph 09 827 6488, contact Bill or Donny Rawlinson. www. westpine.co.nz. NZS4211 Affiliated.

Fine Woodworking 1536 Main North Road, R D 5, Te Kuiti, Ph 07 878 6194, David Higgins. NZS4211 Affiliated.

Wendekreisen Travel Ltd Unit 1, 197 Montgomerie Road, Mangere, Auckland, Ph 03 489 6507, contact Sascha Warnken; Dieter Schuetze Woodland Shopfitting 91 Wairau Rd, Wairau Valley, Auckland. Ph 09 222 3113, contact Angela Sneddon.

Wood Works NZ Ltd 18 Selwyn St, Onehunga, Auckland, 1061.Ph 021 150 5710, contact Serge Landry.

Gartshore Group 211 Taurikura Dr, Tauriko, Tauranga. Ph 07 578 4529, contact Bill Gartshore. NZS4211 Affiliated.

Got It Made Kitchens and Cabinetry 360 Rickit Road, Te Awamutu 3800. Ph 07 871 3998, contact Cherie van der Poel or Eric Prole.

Graft Joinery Ltd 32 Raywood Cres, Taupo 3033. Ph 07 378 8340, contact Craig van Velden.

Hamilton Laminates 58 Bryant Road, Te Rapa, Hamilton, Ph 07 849 7745, contact Steve Harker.

HK Kitchens Ltd 144 Taurikura Drive, Tauriko, Tauranga, Ph 07 578 6361, contact Matt Olsen.

Hopkins Joinery 126 Taupo St, Putaruru. Ph 07 883 7951, contact Ron or Hilary. NZS4211 Affiliated.

Hostess Joinery Ltd 17 Sunshine Ave, Te Rapa, Hamilton, Ph 07 847 3099, contact Peter Clarke.

Huntly Joinery 2000 Ltd 22-26 Glasgow St, Huntly, Ph 07 902 5250, contact Simon Curran. NZS4211 Affiliated.

Innovant Cabinetry Ltd 3 Allen St, Morrinsville, Waikato 3300. Ph 07 889 6178, contact, Tracy Maxwell.

Interior Fittings Ltd 23 White St, Rotorua 3010, Ph 07 348 1041, contact Josh Anderson.

Keith Paton Joinery 15 Carters Crescent, Cambridge, ph 07 827 3249, contact Keith Paton.

King Country Kitchens 49 King St, Te Kuiti, Ph 07 878 8820, contact Richard Pethybridge. NZS4211 Affiliated.

Kitchen Fx Ltd 801 Arthur Porter Dr, Burbush, Hamilton. Ph 07 849 2801, contact Mark Davies.

Lee Brothers Cabinets & Joinery 120 View Rd, Rotorua, Ph 07 348 0620, contact Paul Ingram. NZS4211 Affiliated.

LPS Cabinetry Ltd 55 Miriama St, Taumarunui 3920. Ph 027 539 4702, contact Lewis or Deborah Stewart MGK Kitchens 2 Lake Rd, Frankton, Hamilton, Ph 07 847 4563, contact Michael Kenyon.

Montage Kitchens & Joinery PO Box 5266, Frankton, Hamilton. Ph 07 8479 174, contact Jared Monk. NZS4211 Affiliated.

Morrinsville Industries Ltd 11-13 bank St, Morrinsville. Ph 07 889 5199, contact Murray Foster. NZS4211 Affiliated.

Native Timber Joinery Ltd 92 Bruce Berquist Drive, Te Awamutu, Ph 07 871 6188, contact Stuart Walker. NZS4211 Affiliated.

Pacific Coast Kitchens NZ Ltd 471 Omokoroa Road, R D 2, Tauranga, Ph 07 548 0606, contact Eric Thompson.

SMJ Ltd 49A Matai Street, Taupo. Ph 07 378 8049, contact Stu Martin.

Treetown Kitchens Ltd 57 Albert Street, Cambridge, Ph 07 827 7309, contact Kevin Middlemiss.

Thames Joinery (1995) Ltd 913 Queen Street, Thames, Ph 07 868 6951, contact Bruce Fulton.

The Good Joiner 18 Killegray Close. Hamilton 3210. Contact Ian Megchelse 021 056 1487.

The Kitchen Tailor 58b Herbert Rd, Queenwood, Hamilton. Contact Adam McNeil 0274 481 879.

Torrington Stairways 24 Matos Segedin Drive, Cambridge, Ph 07 827 6323, contact Brian Courtney.

Wackrow’s Joinery Ltd Gillies St, Box 150, Cambridge. Ph 07 827 5981, contact Carl Riley or Liam Wackrow. NZS4211 Affiliated.

Waikato Benchtops Ltd Glasgow Street, Huntly, Ph 07 902 5353, contact Simon Curran.

CENTRAL

TARANAKI

Al-Wood Joinery (2019) Ltd 7 Arthur Street, Pahiatua, Ph 06 376 8692, contact Gus Shilvock.

Broadway Joinery 381 Broadway, Stratford, Ph 06 765 6829, contact Graham Podjursky.

Benchtop Surfaces Ltd 590 Tremaine Ave, P. North. Ph 06 356 9384, contact James Hurren.

Elite Kitchens 2004 Ltd 23 Oropuriri Road, New Plymouth 4312, Ph 06 759 8221, contact Sean Rice.

Bespoke Joinery & KItchens Limited 1 Sutton Plc, Kelvin Grove, Palmerston North. Ph 06 357 6429, contact Blake Simpson.

Hawera Kitchens and Furniture Ltd 24 Glover Road, Hawera 4610, Ph 06 278 7044, contacts Klinton Hunt / Lance Hunt.

Careys Joinery (1989) Ltd 7 Bowen St, Marton. Ph 06 327 7949, contact Shaun McDowell.

In 2 Kitchens Limited 78 Portia Street, Stratford, Ph 06 765 4058, contacts Brent and Jo Russ. NZS4211 Affiliated.

Counter Concepts 16 Bisley St, Palmerston North, ph 06 355 5971, contact Graeme Andrews.

Jones & Sandford Joinery Ltd 285 St Aubyn Street, New Plymouth, Ph 06 759 9251, contact Roger Jones.

D-Mac Joinery Ltd 517 Lees Rd, RD5, Feilding, 4775, ph 027 457 0490, contact Drew McBride.

Kitchen Designz NZ Ltd 225-229 Courtenay St, New Plymouth. Ph 06 759 8324, contact Dan Holmes.

Heritage Doors Ltd 3 Muhunua West Road, Ohau, Levin, Ph 0274 418 934, contact Tod Aitken. NZS4211 Affiliated.

KP Joinery Ltd 2 Dowding Place, Waitara. Ph 06 754 4726, contact Ken Parsons.

H.R. Jones & Co. Ltd 60 Aorangi St, Feilding. Ph 06 323 4388, contact Mark Pickford. NZS4211 Affiliated.

MacLeod Joinery 42 Beach St, New Plymouth. Ph 06 757 8172, Kieran MacLeod. NZS4211 Affiliated.

Jeff Clayton Joinery 42c Bennett Rd, Palmerston North. Ph 06 357 1736, contact Jeff Clayton.

Mode Kitchens 77B Hurlstone Drive, Waiwhakaiho, New Plymouth 4312, ph 027 521 8527, contact Fraser Hall.

Mastercraft Kitchens By Healey 127 Keith St, Roslyn, Palmerston North, Ph 06 355 4646, contact Kristine Holmes.

New Plymouth Joinery Ltd 10 Cody Place, New Plymouth. Ph 06 758 8580, contact Roger Paul or John Ancell. NZS4211 Affiliated.

Murray Judd Joinery Limited 25 Station Street, Woodville, Ph 06 376 5043, contact Murray & Tessa Judd. NZS4211 Affiliated.

Rob O’Keeffe Joinery Ltd 368 Heads Rd, Wanganui. Ph 06 344 5040, NZS4211 Affiliated.

Reilly Joinery 18A Parkview Ave, Feilding, Ph 06 323 3743, contact Andrew Reilly. NZS4211 Affiliated.

Sayer Industries Limited 123 Cuba Street, Palmerston North 4410 Ph 06 355 8242.

SB Joinery Ltd 2 Edward Street, Pahiatua 4910, Ph 027 979 0368, contact Scott Beales.

TBB Joinery Limited 51 Grey Street, Feilding 4702, Ph 022 633 2928, contact Bruce Birrell.

Townshends Joinery 2024 Limited 59 Makomako Rd, Palmerston North. Ph 06 354 6699, contact Livvy Kendrick. NZS4211 Affiliated.

The Joiner – Leighton Judd Ltd 50 Johnston Street, Foxton, Manawatu, Ph 06 363 5119, contact Leighton Judd Tweakit Joinery Solutions 200 Tutaki Road, Kelvin Grove, Palmerston North.

Ph 06 357 2897, contact Vaughn Tongs.

UCOL Princess St, Palmerston North. Ph 06 952 7001, contact Lindsay Tamblyn. NZS4211 Affiliated.

Unique Timber Joinery 143B Gillespies Line, RD 5, Palmerston North, Ph 06 355 2654, contact James Griffin. NZS4211 Affiliated.

WDA Installations 12 Serenity Cres, Kelvin Grove, Palmerston North, 4414. Ph 027 443 1541, contact Craig Buckley.

Newton Gordge Joinery 2016 Ltd 67 Breakwater Rd, New Plymouth. Ph 06 751 5065, contact Scott Dudley. NZS4211 Affiliated.

Pace Modular 2021 Ltd 113 De Havilland Drive, Bell Block, New Plymouth.

Ph 06 755 4012, contact Lew Dickie or Bryan Frank.

Prestige Kitchens 2001 Ltd 58 Hurlstone Dr, Waiwhakaiho, New Plymouth, Ph 06 759 9177, contact Mark Schmidt.

Rhys Powell Joinery 7A Euclid Street, New Plymouth. Ph 06 753 3822, contact Rhys Powell. NZS4211 Affiliated.

Christie Builders & Joiners 11 Husheer Place, Onekawa, Napier, Ph 06 843 6676, contact Peter Christie. NZS4211 Affiliated.

Classic Kitchens Napier Ltd 8 Lipton Place, Onekawa, Napier. Ph 06 843 6500, contact Stuart Bryson.

D Stevens Ltd 336 Childers Road, Gisborne, Ph 06 867 5700, contact Peter Claydon. NZS4211 Affiliated.

European Designer Kitchens 80 Taradale Rd, Napier. Ph 06 843 7319, contact Murray Nattrass.

Gallery Kitchens Ltd 4 Cadbury Rd, Napier. Email - admin@ gallerykitchens.co.nz, contact Sharon James.

Gemco Trades Ltd 13 Martin Pl, Havelock North. Ph 06 873 8756, contact Craig Russell. NZS4211 Affiliated.

Green Joinery Ltd 30 Morris St, Napier, 4110. Ph 027 750 8603, contact Jae Green.

Kakapo Joinery 2/19 Mersey Street, Pandora, Napier, Ph 021 0258 9617, contact Robin Holthusen Molloy Joinery Ltd 14-16 Husheer Pl, Onekawa, Napier. Ph 06 843 5037, contact Simon Molloy. NZS4211 Affiliated.

MCL Joinery Ltd 1104 Kaipo Rd, Hastings, Ph 06 876 0252, contact John Bower. NZS4211 Affiliated.

McIndoe Kitchens 8 Carnegie Rd, Onekawa, Napier 4110. Ph 06 843 3880, contact Duane Todd.

Parkhill Joinery (Brittan Builders Ltd) 457 St Georges Rd Sth, Havelock North. Ph 06 877 7623, contact Tom Robertson.

Rabbitte Joinery Limited 807 Warren St, Hastings. Ph 06 870 8911, contacts Greg & Trudi Rabbitte. NZS4211 Affiliated.

Summerfield Joinery 4 Innes Street, Gisborne, Ph 06 868 4236, contact Dale Summerfield. NZS4211 Affiliated Sunshine Joinery Ltd 44 Pandora Road, Ahuriri, Napier, Ph 06 844 6105, contact Rick Martin Waipukurau Joinery Limited 2322 Takapau Road, Waipukurau. Ph 06 858 9961, contact Greg O’Kane.

HAWKES BAY POVERTY BAY

Your Solutions Joinery Ltd 15 Edmundson St, Onekawa, Napier. Ph 06 843 5954, contact Adam Satherley.

Awapuni Joinery Ltd 22 Parkinson Street, Gisborne, Ph 06 867 3301 contact Peter Webster.

Alexander Joinery Ltd 72 Thames St, Pandora, Napier 4110. Ph 06 843 2036, contact Jason Collins.

Brittin Builders Ltd T/A Parkhill Joinery 475 St Georges Road South, Havelock North, Ph 06 877 7623, contact Tom Robertson. NZS4211 Affiliated.

Burley Kitchens & Cabinetry Ltd 14 Lipton Pl, Onekawa, Napier. Ph 06 843 5588, contact Craig Burley.

Cherrywood Joinery Ltd 11 PotaeAve, Lytton West, Gisborne. Ph 06 868 0971, contact Richard Childs.

WELLINGTON Ace Kitchens & Laminates Ltd 50 Montgomery Crescent, Clouston Park, Upper Hutt 5018, Ph 04 526 9795, contact Ivan Johnson Carroll’s Joinery Limited 148 Lincoln Road, Masterton. Ph 06 377 3160, contact Richard Carroll.

Commercial Joinery Wellington Ltd 232 Rongotai Road, Kilbirnie, Wellington. Ph 04 387 2050, contact Grant Smith Craftbuilt 77 Hokio Beach Rd, Levin, 5510. Contact Simon Raikes David Barker Custom Cabinets 52 Cooper St, Karori, Wellington, Ph 027 248 8140, contact David Barker. NZS 4211 Affiliated.

JOINERS Magazine Decem December 2024 page 83

David Ladd Joinery Ltd 1a Rewa Tce, Tawa. Ph 04 237 9175.

Ferndale Furniture 67 Seaview Rd, Lower Hutt, Ph 04 568 7879, contact Grant MacDonald.

Goldmark Group Ltd 9-11 Jean Batten St, Kilbirnie, Wellington. Ph 04 387 8964, contact David Goldsack.

Gourmet Wood Inc. Ltd 64 Riverbank Rd, Otaki, Kapiti Coast. Ph 027 338 4790 Interbuild Commercial Interiors Ltd 115 George St, Stokes Valley, Lower Hutt 5019, Ph 04 939 8760, contact Neil Shackleton.

Jacobson Joinery Services 101 Brooklyn Rd, Carterton, Wairarapa 5713. Ph 06 379 8066, contact Vic Jacobson.

Joinery Productions Ltd 457 Jackson Street, Petone, Ph 04 569 8808, contact Wayne Wilmshurst. NZS4211 Affiliated.

The French Door Factory 14A Kingsford Smith Street, Rongotai, Wellington.

Ph 04 387 7822, contact Alan Chambers

Re Space Limited 2 Kidson Place, Nelson 7011, Ph 03 547 1636, contact Steven Harvey or Peter Harvey.

Douglas Furniture Ltd 80 Hay Rd, Wigram, Christchurch, 8240. Ph 03 377 3597, contact: Howard Nossiter.

The Joinery King Limited 73 Hutt Road, Thorndon, Wellington, Ph 04 473 6367, contact Tony King. NZS4211 Affiliated.

Prestige Furniture & Joinery Ltd 38 Beach Road, Richmond, Nelson, Ph 03 544 1789, contact Richard Dohmen.

Dynamic Joinery & Kitchens Ltd 6b Maces Road, Bromley, Christchurch, Ph 022 087 9918, contact Ben Vyas.

Tom Lemon Joinery 2/66 The Parade, Island Bay, Wellington. Contact Tom Nicholas 027 527 0258.

Quaystone Holdings Ltd 42 Batchelor Ford Rd, Motueka 7120. Ph 03 528 6140, contact Matt Hinton.

East Joinery Ltd Unit 3, 56 Wickham St, Bromley Christchurch. Ph 021 138 3119.

Upspec Joinery 72 Sydney St, Petone, Lower Hutt 5012. Ph 021 0279 2067, contact Rueben Hanns-Voyle.

Ruby Bay Joinery Ltd 8 Warren Plc, Mapua, Nelson. ph 03 540 2123 contact Wayne Roberts. NZS4211 Affiliated.

Elite Joinery Ltd Unit 1, 97A Sawyers Arms Road, Papanui, Christchurch, Ph 03 354 8311, contact Hayden & Sarah Illingworth.

Wainui Joinery (1977) Ltd 34 Burden Ave, Wainuiomata Lower Hutt. Ph 04 564 7011, contact Nikki Wynne. NZS4211 Affiliated.

Simply Joinery 2018 Ltd 924 Queen Charlotte Drive, R D 1, Picton, Ph 021 126 2514, contact Glen Godsiff. NZS4211 Affiliated.

Evolution Interiors Limited 19 Stanmore Road, Phillipstown, Christchurch, Ph 03 381 1633, contact Karl Kitchingham.

Well Hung Joinery 21 Lower Tyers Road, Ngauranga, Wellington, Ph 04 494 7230, contact Stephen Fairbrass.

NZS4211 Affiliated.

The Custom Space 150 Vanguard St, Nelson 7010. Ph 03 548 4066, contact Jack Wells.

Finesse Joinery 423 Main North Road, Christchurch. Ph 03 352 3457, contact David Street.

The Sellers Room 9 Echodale Place, Stoke, Nelson, Ph 03 547 7144, contact Margarette Sellers

Hagley Kitchens 6 Nazareth Ave, Addington, Christchurch. Ph 03 961 0703, contact Nathan Moore.

Viking Furniture & Joinery Ltd 88 Vanguard Street, Nelson, ph 03 548 0493, contact Barry Thomas. NZS4211 Affiliated.

Haspert Joinery 95B Main South Rd, Sockburn, Christchurch. Ph 021 031 2666, contact Allan Zhu.

Waimea West Joinery Ltd 111 Beach Road, Richmond, Nelson, Ph 03 544 0177, contacts Kathy & Alan Gibbs. NZS4211 Affiliated.

Homeview Building Products Ltd 772 Halswell Junction Rd, Hornby, Christchurch.

Ph 03 343 9949, contact Howard Stone. NZS4211 Affiliated.

Kapiti Kitchens Ltd 345 Kapiti Rd, Paraparaumu Beach, Kapiti. Ph 04 902 5551, contact Kristine Holmes.

Wellington Joinery and Kitchens Ltd 8a Burgess Road, Johnsonville, Wellington. Ph 04 478 7652, contact Phil Schwartfeger. NZS4211 Affiliated.

L & P Crown Joinery (2002) Ltd 37 Burden Avenue Wainuiomata. Ph 04 564 8895, contact Jeremy Patmore. NZS4211 Affiliated.

Woodhaus Joinery Ltd 54B Kent Street, Carterton 5713, Ph 022 322 0383, contact Andrew Woodhouse.

Living Timber European Joinery & Furniture Ltd 64 Fisk Street, Naenae, Lower Hutt, Ph 04 567 2577, contact Horst Mundt. NZS4211 Affiliated.

Your Kitchen Limited 30 Seaview Rd, Lower Hutt, Wellington. Ph 04 576 9348, contact Paul Lunn.

Maycroft Construction Ltd 16 Gregory Street, Lower Hutt, Ph 04 567 0014, contact Chris Fayen Maymorn Joiners Ltd 247 Parkes Line Rd, Upper Hutt, Ph 04 526 6657, contact Anthony Neustroski. NZS4211 Affiliated.

M B Brown Ltd 67 Ngaumutawa Rd, Masterton, Wairarapa. Ph 027 538 8154, contact Jamie Searle.

My Joiner Ltd 64 Ruskin Rd, Newlands, Wellington 6037. Ph 021 487 500, contact Ulrich Kohler.

NZ Cabinetmaker Ltd 39 Park St, Kingsley Heights, Upper Hutt, 5019, Ph 021 923 231, contact Benn Hamilton.

NELSON MARLBOROUGH A K Joinery Ltd Units 3-5, 28 Dublin Street, Picton, Ph 03 573 6860, contact Andrew Kenny.

Bays Joinery Ltd 6 Tokomaru Place, Wakatu Industrial Estate, Stoke, Nelson, Ph 03 544 0087, contact George Molnar.

NZS4211 Affiliated.

Brightwater Cabinetmaker & Joinery Ltd 8c Merton Place, Annesbrook, Nelson 7011, Ph 03 548 6400, contact James Palmer.

Orchard Joinery Ltd 14-18 Te Roto Drive, Paraparaumu, Ph 04 298 3380, contact Geoff Orchard. NZS4211 Affiliated.

Building Connexion Ltd ITM Joinery, 16-18 King Edward St, Motueka, Ph 03 528 7256, contact Paul Rusbatch. NZS4211 Affiliated.

Paraparaumu Doors & Joinery 14 Manchester St, Paraparaumu, Ph 04 297 2233, contact Tony Thomson. NZS4211 Affiliated.

Cantwell Joinery and Window Centre 15 Bristol Street, R D 4, Riverlands, Blenheim, Ph 03 578 3375, contact Ian Cantwell.

Pete’s Joinery & Building Ltd 205 Main St, Greytown. Ph 06 304 9137, contact Peter Algie, Rhys Severn or Paul Coventry.

NZS4211 Affiliated.

Complete Kitchens Ltd 415 Main Road, Spring Grove, Wakefield, Ph 03 539 0055, contact Hamish Drummond.

Prestige Joinery Limited 140 Perry Street, Masterton, Ph 06 377 1331, contact Gregory Morgan. NZS4211 Affiliated.

Redwood Kitchens 40a Main Rd, Tawa, Wellington. Ph 027 8855 441, contact Keith Hollow.

Renalls Joinery Limited 147 -155 High St Sth, Carterton. Ph 06 379 8008, contact Trevor Kenavan. NZS4211 Affiliated.

Stylish Interiors Ltd 29D Dragon St, Granada North, Wellington. Ph 04 473 1944, contact Mathew Gubb. NZS4211 Affiliated.

The English Craftsman (Amalgamated Joiners) 4 Mountbatten Grove, Upper Hutt 5018, Ph 04 526 8091, contact Paul Pepper. NZS4211 Affiliated.

Cooper Webley (2006) Ltd 64 Beatty Street, Tahunanui, Nelson, Ph 03 547 0010, contacts Noel Tait / Michelle Hill.

James Neal Joinery 35 Fell Street, Grovetown, Marlborough, Ph 03 577 7872, contact James Neal.

Matai Joinery Nelson Ltd 26 Quarantine Road, Stoke, Nelson 7011, Ph 03 547 7990, contact Greg Couper. NZS4211 Affiliated.

Motueka Joinery Co 2001 Ltd 20 Old Wharf Road, Motueka, Ph 03 528 9012, contacts Phil or Barb Sharkie.

Nazareth Joinery 2017 Ltd 1 Warwick Street, Mayfield, Blenheim, 7201. Ph 03 578 8752, contact Leigh Jones.

Orange Building Group Joinery Ltd 16 Nayland Road, Stoke, Nelson. Ph 03 547 9784, contact John Andrew.

JOINERS Magazine December 2024 page 84

CANTERBURY Adrian Harris Woodcraft Unit J, 3 Timothy Place, Wigram, Christchurch 8042, Ph 03 348 6996, contact Adrian Harris.

NZS4211 Affiliated.

Advanced Joinery Ltd 27 Watts Road, Sockburn, Christchurch, Ph 03 348 7700, contact Greg Ayers. NZS4211 Affiliated.

Alsop Joinery Ltd 18 Alloy Street, Sockburn, Christchurch, Ph 03 348 4666, contact Paul Baker. NZS4211 Affiliated.

Anderson Joinery Ltd 247 Alford Forest Rd, Ashburton. Ph 03 308 2988, email: anderson.joinery@xtra.co.nz, contact Dougal Anderson.

Architectural Joinery Ltd 82 Buchan Street, Sydenham, Christchurch. Ph 03 377 6760, contact Andrew Clark Ashburton Joinery Limited 8 John Street, Ashburton, Ph 03 308 5059, contact James Donaldson. NZS4211 Affiliated.

Bates Joinery (2008) Ltd 101 Shortland Street, Christchurch 8061, Ph 03 388 8111, contact Mark Allworthy. NZS4211 Affiliated.

Bower Joinery 12a Bower Ave, Christchurch. Ph 03 388 2924, contact John Mudgway.

Brent Johnson Joinery Ltd 306 Flaxton Road, Rangiora, North Canterbury.

Ph 03 313 6256, contact Brent Johnson. NZS4211 Affiliated.

Busch Joinery Limited 1737 Boundary Road, R D 3, Ashburton, Ph 027 563 4537, contact Nathan Busch Creative Joinery Ltd Unit 1/ 7 Homersham Pl., Burnside. Ph 03 358 4900, contact Wayne Brown.

Don’s Joinery Ltd 43 Sandown Cres, Christchurch. Ph 03 382 0828, contact Don McClintock.

House of Joinery 168 Voss Rd, Ladbrooks RD2, Canterbury 7672, Ph 021 955 959, contact Johnny Alsop.

Joinery by Design 15 King Edward Tce, Woolston, Christchurch. Ph 03 384 8461, contact Evan McLachlan & David Phillips. NZS4211 Affiliated.

Joinery Concepts 2006 Ltd 25 Osbourne Street, Phillipstown, Christchurch, Ph 03 381 1066, contact Peter Robertson.

Joinery Scene Ltd 43 Sonter Rd, Wigram, Christchurch. Contact Richard Hill 021 623 446.

Kitchen Maker Christchurch Ltd 39 Ballarat Way, Wigram, Christchurch, 8025. Ph 021 988 868, contact David Li. LX Joinery 39A Buchanans Road, Sockburn 8042, Christchurch, Ph 03 342 9605, contact Steve Mangan. NZS4211 Affiliated.

Mackay Kitchens Ltd 345 Brougham Street, Sydenham, Christchurch 8023, Ph 03 365 3988, contact Chris Moore.

Misco Joinery 62 Williams St, Kaiapoi, Canterbury 7630, Ph 03 383 4384, contact Penny Abell.

Modern Age Kitchens & Joinery Ltd 127 Montreal St, Sydenham, Christchurch 8023.

Ph 03 365 1675 contact Grant Woodham.

Modulink Screen Partitions 2012 Ltd 35 Lunns Rd, Middleton, Christchurch, Ph 03 338 6464, contact Sam Bain.

Murray Hewitt Joinery Ltd 25A Lunns Rd, Christchurch, Ph 03 343 0360, contact Murray Hewitt. NZS4211 Affiliated.

Murray Milne Ltd 231 Cameron St, Netherby, Ashburton. Ph 03 308 8018, contact Murray Milne.

MWF Manufacturing Ltd Unit 3, 11 March Plc, Belfast, Christchurch. Ph 03 365 6218, contact Gary Altenburg. NZS4211 Affiliated.

Nordzco Joinery 652 Halswell Junction Rd, Hornby, Christchurch.

Ph 03 348 4890, contact Wayne Melrose.

NZ Doors (2004) Ltd 41 Anchorage Road, Hornby, Christchurch, Ph 03 344 2516, contacts Ron and Lisa Zwarst.

NZS4211 Affiliated.

Barrett Joinery Ltd 204 Hilton Highway, PO Box 2115 Timaru. Ph 03 688 4738, contact Mark Mitchell. NZS4211 Affiliated.

Paul Renwick Joinery Ltd 9 Paragon Plc, Sockburn, Christchurch. Ph 03 349 7049, contact Paul Renwick.

Duncan Joinery Limited 20 King Street, Temuka, South Canterbury, Ph 03 615 7327, contact Craig Duncan.

R A Hale Ltd 126 Hazeldean Rd, Addington, Christchurch. Ph 03 3666 909, contact Donald Bisphan. NZS4211 Affiliated.

Firman Joinery Ltd 10 Endeavour Cres, Nth Oamaru Business Park, Oamaru. Ph 03 434 1561, contact Gary Firman.

NZS4211 Affiliated.

Ruben’s Joinery Limited 402 Bethels Road, 4 R D, Christchurch, Ph 03 329 5458, contact Ruben Patchett. NZS4211 Affiliated.

Geraldine Timber Products 27 High Street, Geraldine, Ph 03 693 9598, contact Paul Autridge. NZS4211 Affiliated.

Ryan’s Kitchens and Joinery 9 Kilronan Plc, Wigram, Christchurch 8041, Ph 03 348 7921, contact Ryan Butler.

J E Dennison Ltd 5 Redruth St, Timaru. Ph 03 688 0029, contact Gary Dennison. NZS4211 Affiliated.

Sockburn Joinery 33 West Coast Rd, Yaldhurst, Christchurch. Ph 03 342 6044, contact Tony Lemmens.

JMAC Joinery Ltd 7 Laughton Street, Washdyke, Timaru, Ph 03 688 2725, contact Craig Mason. NZS4211 Affiliated.

Silver Fern KItchens 12 Princess St, Addington Christchurch. Ph 021 288 8373, contact Gary Lin.

Joinery Zone 2012 Ltd 27 Redruth St, Timaru. Ph 03 688 8223, contact Warren Atwill. NZS4211 Affiliated.

Sydenham Joinery Ltd 6 Dalziel Pl, Woolston, Christchurch, Ph 03 379 6840, contact Grant Weston. NZS4211 Affiliated.

Lunds Joinery Ltd 33a Grants Rd, PO Box 128, Timaru. Ph 03 688 9149, contact Mark Albert. NZS4211 Affiliated.

The Joiner Shop 2024 Ltd 19 Beach Road, Kaikoura 7300, Ph 03 319 5562, contact Ash or Tania Hastelow.

Millennium Joinery Ltd 2 Regina Lane, Oamaru. Ph 03 437 0227, contact Michael Sandri. NZS4211 Affiliated.

Timber Doors & Windows 2007 Ltd 194 Wordsworth Street, Sydenham, Christchurch 8023, Ph 03 379 1725, contact Martyn Neville.

NZS4211 Affiliated.

Paterson Joinery 307 Rosewill Valley Road, Timaru. Ph 03 688 7060, contact Alan Paterson.

Timber Tru Ltd 411 Tuan St, Linwood, Christchurch, Ph 03 389 2986, contact Tony van der Plas. NZS4211 Affiliated.

Rycole Joinery 44 Homestead Road, 1 DRD, Oamaru, Ph 03 434 5012, contacts Darryl and Adrienne Whitburn NZS4211 Affiliated.

Cut-it Joinery Limited 3 Enterprise Drive, Wanaka, Ph 03 443 5031, contact John Titterton.

O’Brien Group 2012 8 Gow Street, Mosgiel, Ph 03 489 3849, contact Peter O’Brien.

Elite Joinery Solutions 104 Middle Street, Pukerau, ph 03 208 5819, contact Regan Hughes.

PDL Kitchens 113B North Rd, Invercargill, Southland 9810, Ph 027 424 5578, contact Paul Lindsay.

Fiordland Joinery 10 Caswell Rd, Te Anau, Southland 9600, Ph 03 249 4339, contact Simon Irwin.

Queenstown Joinery 53 Industrial Place, Queenstown, Ph 03 442 7555, contact Kevin Harradine. NZS4211 Affiliated.

Form Joinery 23 Little Alpha Loop, Wanaka, Otago 9305. Ph 021 483 676, contact Nick Elliot.

Riversdale Joinery Ltd 105 Liverpool Street, Riversdale, Southland 9744, Ph 03 202 5527, Barry O’Connor. NZS4211 Affiliated.

Formatt Bespoke Joinery Co Ltd 19 Glenda Drive, Queenstown. Ph 03 441 4944, contact Reuben Bogue. NZS4211 Affiliated.

G L Stevenson Builders Ltd 53 Stone St, Dunedin 9010, Ph 027 7146 523, contact Michael Stevenson Howley Joinery Ltd 224 Mersey Street, Invercargill, Ph 03 214 1055, contact Glen Howley. NZS4211 Affiliated.

JP Quality Kitchens Limited 66 Vogel Street, Dunedin, Ph 021 474 300, contact John Peddie.

Joinery Specialists 1997 Ltd PO Box 502 Dunedin, Ph 03 488 2371, contact Graeme Emmerson.

Leading Edge Joinery Specialists Ltd 13 Surrey Street, Gore, Ph 027 6774 729, contact Donald McGuigan. NZS4211 Affiliated.

Leith Joinery 2 Roberts St, Dunedin. Ph 03 477 0115, contact Peter Leith. NZS4211 Affiliated.

Masterwood Joinery 2008 28 McNulty Road, Cromwell, Ph 03 445 0313, contact Dave Wilson. NZS4211 Affiliated.

OTAGO SOUTHLAND

Mearns and Leckie Limited 7 Gow St, Mosgiel 9024, Ph 03 489 2024, contact Matt Fuehrer. NZS4211 Affiliated.

Woodshack Kitchens 113 Izone Drive, Rolleston, Canterbury 7675, Ph: 03 347 9790, contact Mark Davis.

Abernethy Joinery 18 Melbourne Street, Dunedin, Ph 03 456 1654, contact Ian Abernethy. NZS4211 Affiliated.

Mojo Modern Joinery Ltd 96 Gair Ave, Cromwell, Ph 03 445 0128, contact Craig Harrison.

WAITAKI

B & M Joinery Ltd 4 Ree Crescent, Cromwell, Ph 03 265 2077, contact Brendon Munro. NZS4211 Affiliated.

Nasko Factory Ltd 22A Margaret Place, Frankton Industrial, Queenstown, Ph 03 442 3206, contacts Stephen Walak, Amanda Trainor. NZS4211 Affiliated.

Coronet Woodware (2017) Ltd 99 Glenda Drive, Queenstown, Ph 03 442 3700, contact Colin Strang. NZS4211 Affiliated.

Steadfast Joinery Limited 41 Ward St, CBD, Dunedin 9016, Ph 03 470 1990, contact Leroy Cunningham.

Stevenson & Williams Ltd Joinery 64 Prince Albert Rd, St Kilda, Dunedin. Ph 03 455 4034, contact Andrew Duncan. NZS4211 Affiliated.

Stewart Construction Ltd PO Box 2125, St Kilda. Ph 03 455 2057, contact Barry Taylor. NZS4211 Affiliated.

Trends Kitchens Ltd 34A Parkhouse Road, Sockburn, Christchurch, Ph 03 343 5242, contact James McKeown

Alpine Joinery 480 Fairview Road, No 2 RD, Timaru, ph 03 688 5748, contact Paul Butchers.

Ron Kirk Joinery Ltd 403 Kaikorai Valley Road, Dunedin, Ph 03 453 5718, contact Hayden Kirk. NZS4211 Affiliated.

Urban Woodwork LTD 10A Gow St, Mosgiel, Dunedin 9024. Ph 027 284 7030, contact Ben King.

Wanaka Joinery & Glass Ltd 52 Ballantyne Road, Wanaka, Ph 03 443 7890, contact Kent McIntyre. NZS4211 Affiliated.

Wedgerwood Joinery Ltd 11 Ngapara St, Alexandra. Ph 03 448 8832, contact Russell Mair. NZS4211 Affiliated.

Withers Joinery 78 Factory Rd, Mosgiel. Ph 03 489 4179, contact Paul Crawley. NZS4211 Affiliated.

Wood Solutions 5 Orari St, Sth Dunedin, Dunedin. Ph 03 479 2323, contact Andrew Bellamy. NZS4211 Affiliated.

Nigel Molloy Joinery Limited 300 Great North Road, Winton, Ph 03 236 0399, contact Nigel Molloy. NZS4211 Affiliated.

National Associate Members AGB Stone www.agbstone.co.nz

Carters www.carters.co.nz

Hettich New Zealand www.hettich.co.nz

Metro Performance Glass www.metroglass.co.nz

Steelfort Engineering Ltd www.steelfort.co.nz

Advanced Engineering Services www.aesparts.co.nz

Daiken New Zealand Limited www.daiken-nz.com

Homag www.homag.com

Miles Nelson MF Co Ltd www.milesnelson.co.nz

Superior Doors Ltd www.superiordoors.co.nz

Allegion (New Zealand) Ltd www.allegion.co.nz

Drake & Wrigley Ltd www.drakeandwrigley.co.nz

Innergy www.innergy.com

Mirotone NZ Ltd www.mirotone.com

Thermawood www.thermawood.co.nz

Architectural Hardware Supplies www.ahs.co.nz

Enko Group Ltd www.enkogroup.com

ITI NZ www.iti.net.nz

Mulford Plastics www.mulfordplastics.com.au

Tunnicliffe Timber Solutions 2018 Ltd www.tunnicliffes.co.nz

ASSA ABLOY New Zealand Ltd www.assaabloy.com

Fit NZ www.fit-nz.co.nz

Kantek www.kantek.co.nz

Nelson Pine Industries Ltd www.nelsonpine.co.nz

Unique Hardware Solutions Ltd www.uniquehardware.co.nz

Astro Pine NZ Ltd www.astropine.co.nz

Glass Half Full www.glasshalffull.co.nz

KLC Limited www.klc.co.nz

New Zealand Panels Group www.nzpanels.co.nz

Viridian Glass www.viridianglass.co.nz

Austaron Surfaces www.austaronsurfaces.com

Häfele NZ Ltd www.hafele.co.nz

Joinery IT www.joineryit.co.nz

Panelform Ltd www.panelform.co.nz

W & R Jack Ltd www.jacks.co.nz

BBS Timbers www.bbstimbers.co.nz

Halswell Timber Co Ltd www.halswelltimber.co.nz

Laminex New Zealand www.laminexnewzealand.co.nz

Proform www.proformnz.co.nz

Wurth New Zealand Ltd www.wurth.co.nz

Biesse Group New Zealand www.biessenewzealand.co.nz

Henkel NZ Ltd www.henkel.com

Leitz Tooling NZ Ltd www.leitz.co.nz

Resene Paints Ltd www.resene.co.nz

Blum NZ Ltd www.blum.com

Herman Pacific www.hermpac.co.nz

Machines ‘R’ Us Ltd www.machinesrus.co.nz

Rosenfeld Kidson & Co Ltd www.rosenfeldkidson.co.nz

Burns & Ferrall www.burnsferrall.co.nz

Harvey Norman - Commercial www.harveynorman.co.nz

Marbello International Ltd www.marbello.com

Seearco Industrial Abrasives www.seearco.co.nz

JOINERS Magazine December 2024 page 85

PRODUCT focus Laser the future of edgebanding Laser units are renowned for creating an exceptionally strong bond, particularly at the edges where durability and moisture resistance are critical.

L

aser edgebanding technology was first introduced in 2009 and has revolutionised the way edge tape is applied in modern cabinetry workshops. Designed specifically for processing laser tape, laser units remain the most effective solution for producing high-quality finishes with efficiency. Despite the development of alternative methods over the years, laser units continue to stand out as the best option. Here’s why: Affordability In the past, laser units were seen as too expensive and out of reach for many businesses. However, that's no longer the case. Advances in technology and increased demand have significantly brought down the price, making laser units much more accessible. Now, even smaller workshops can take advantage of laser units, levelling the playing field in high-quality edgebanding.

Superior Bond Strength Laser units are renowned for creating an exceptionally strong bond, particularly at the edges where durability and moisture resistance are critical. The laser activation process ensures that

the functional layer of the laser tape is fully engaged, resulting in a bond that remains secure over time. This strength translates into increased durability, minimising the risk of delamination.

Consistent & Reliable Results One of the key advantages of using laser units is their ability to deliver consistent results.

Every edge is processed with the parameters as specified by the tape manufacturer, ensuring the best possible consistent appearance and performance.

High Productivity and Fast Processing Speeds Capable of processing at feed speeds up to 24 m/min with short gaps between workpieces, laser units significantly increase throughput while maintaining a high-quality finish. This is especially beneficial for highvolume operations where efficiency is key to competitiveness and meeting production targets.

Instant Readiness and Quiet Operation Unlike systems that require lengthy warm-up periods, laser units are instantly ready for use. Switch the edgebander on and immediately

JOINERS Magazine December 2024 page 86

start feeding workpieces. Laser units also operate with near-silent efficiency, making for a quieter more comfortable workshop environment.

Energy Efficiency and Low Operating Costs Laser units consume just 3kW and don’t require any compressed air or refills of consumable gasses.

This reduces the overall energy consumption of the workshop and translates into lower operational costs. With rising energy prices, the cost-saving potential of using a laser unit can be significant over time. Furthermore, laser units are low-maintenance with no moving parts, requiring fewer repairs and part replacements compared to more complex systems.

Seamless Integration with Edgebander Control Systems Laser units are fully integrated into the edgebander’s control system, which means there’s no need for external 3rd party components and complicated retrofits.

Advanced Laser Technology for Optimal Performance The 2nd generation laser unit features a rectangular laser beam, which delivers consistent

activation across the full width of the tape. This design ensures an even bond strength across the full width of the tape, resulting in a stronger and more durable edge.

Another standout feature is the intelligent energy calculation interface. Most tape rolls have a laser energy rating printed on the inner side. Machine operators simply enter the rating along with the tape width. The laser unit then automatically adjusts its energy output in sync with the machine’s feed speed, optimising performance to align with the tape manufacturer’s specifications to ensure the best possible results.

Conclusion Laser units remain the gold standard for processing laser edgebanding tape. They provide a strong bond, reliable performance, high productivity and energy efficiency. By improving product quality and lowering operating costs, laser technology is a smart choice for workshops looking to stay ahead in the industry.  Our thanks to Simon Hornby, Head of Sales at Jacks for providing this article.

Not just for men New dust filtration for Men’s Shed in North Shore Auckland A busy Men’s Shed on the North Shore knew the number of portable units linked to their many machines was allowing very fine dust to still be emitted, settling all over the work room and potentially a threat to the health of it’s members.

Chris Bulkeley approached NZ DUCT+FLEX to discuss a solution, and as the company has assisted many Men’s Sheds in the past, they were familiar with the problems.

This Men’s Shed has about 230 members currently, and the membership now includes some females. Not all members are retirees – many are still working in paid employment. Either busy with their own projects, or manufacturing items for other organisations including schools and daycare centres, members also fit in repairs to an amazing array of items. The value to the members is not only the projects worked on: it is the team spirit resulting from everyone combining their various skills that most agree is a huge reward, and this especially contributes to positive mental health.

As a major change to the work room set up, the new dust extraction filter was to be placed outside, on council land which took several years for the ‘go ahead’, however NZ DUCT+FLEX honoured the original quoted cost when permission was finally granted.

The new facility provides the perfect safe clean air environment for them to produce their items, and Chris Bulkeley confirms that the upgrade is “good, if not better than his expectations”.

A traditional 2 modular baghouse filter was installed by one of the two install teams who are permanent employees at NZ DUCT+FLEX, driven by a JK 25D 4kW fan, and the dust is collected in bags for easy removal. Geoff Ebdon from NZ DUCT+FLEX says “As all the components i.e. the fan, filter,

filter bags and ducting all come from JKF, compatibility and performance of the whole system is assured. The filter units, made of Swedish finely galvanised steel, can be enlarged by removing the end panel, adding another module and bolting the ends on again if expansion is ever required.

Servicing these units is minimal and consists of oiling the fan shaft occasionally.

“The secret to long lasting dust removal, with minimal maintenance, is sizing up the filter, fan and the needs of the customer’s machinery correctly, and it is the FILTER AREA, not only the fan power, that is also key,” says Geoff Ebdon.

“If you ask too small a filter unit to handle too much air and dust, instead of the dust cake forming gently on the surface of the filter material, it gets driven deep into the pile of the material and starts to clog. Once this happens it’s a downhill slope of: poor filtration and constant filter sock replacement, (this is costly); dust left in the work area creating health issues; and dust dangerously settling in the duct work (a potential fire risk). “When it comes to filters (commonly called bag houses) a good ‘big one’ will always beat a good ‘little one’ for longer life and less problems.” says Geoff.

Chris Bulkeley said the members could immediately see the lack of dust in the building compared with the old style extraction and are looking forward to many years of low maintenance service that the new extraction will provide.

2 Bay Bag Emptying Modular filter at Men’s Shed North Shore.

For more information for a dust extraction solution visit www. nzduct.co.nz or call 0508 69 38 28

Busy work shop – dust free after the filter upgrade.

JOINERS Magazine December 2024 page 87

ADVERTISER INDEX It’s the perfect design & machining software for people producing: Kitchens Office fit-outs Built-in Wardrobes Interior Joinery

Hannover Germany 26-30 May 2025 www.ligna.de

Metal Plastic

3D Design & Manufacturing Software ...

Kray Rendering Virtual Reality CNC Link

www.alphacam.co.nz

e. Info@pro100.co.nz p. 09 419 7362 www.pro100.co.nz

P: 09 947 - 4288

m

NZ Agent for Holzher machines, new sales, spare parts & service.

77

BCITO

75

Biesse Group

55

a

g

a

z

i

n

e

Hard copy to Australia

• Edgebanders • CNC Machining Centers • Vertical Panel Saws • Pressure Beam Saws • Panel Handling Mike French - 021 353 632 Rajan Pillay - 021 504 929 sales@techms.co.nz Showroom (by appointment) 6b Earl Richardson Ave, Wiri

m

a

g

a

z

i

n

e

for sale

4

issues per annum

$295 +gst

A $75.00

michael@joiners.net.nz

this space

NZ’s largest range of new & secondhand equipment

New Zealand SCM Agents

0800 522 577 www.jacks.co.nz

Phone 09 820 9486 www.machinesrus.co.nz

Machines that mean business

MACHINERY

JOINERS Magazine December 2024 page 88

Wide range of used machines available

Routers Edgebanders Beam Saws

Prowood Machinery Ltd

(09) 278 1870

Phone 09 442 5699 www.prowood.co.nz

44,45

Cabinets by Computer

71

Enko

29

Egmont Air

5

Farnese

info@alphacam.co.nz

Technical Machinery Services Ltd

All About Labels

Blum

P: 09 947 - 4288

The total CAD/CAM solution for all your manufacturing of

Stone

ibc

info@polyboard.co.nz www.polyboard.co.nz

Wood

3D Kitchen

Fit

59,67 37

Hafele (NZ) Ltd

ifc,1

Halswell Timber

27

Hettich

25

Hideaway Bins

47

Homag

11,57,63

Katalog

33

Laminex

13

Leitz

61

Machines R Us

51

Nelson Pine Industries

2

NZ Duct & Flex

81

NZJMF

15

NZ Panels Group

7

One Finance

53

Panelform

35

PPG

9

Resene

17

Reward Hospitality

65

Treotham

69

W & R Jack

obc

30 Years

REDEFINING VALUE FOR KIWI MANUFACTURERS

Advantages of True Laser Technology: • • • • • •

Instantly ready for use - no warm-up times.

Energy efficient - needs no compressed air.

No consumables.

Unbeatable bond strength between tape and board.

Low maintenance.

Simple operation directly from the machine’s control panel.

AFFORDABLE TRUE LASER TECHNOLOGY

Machines that mean business 0800 522 577 | www.jacks.co.nz