The Mupas Biometric Watch
Instruction Manual
Setting up your Mupas Biometric Watch
The Mupas Biometric is our most popular mobile model, designed to stay with you throughout the day. It continuously records a wide range of environmental signals while simultaneously monitoring your biological markers. Like other Mupas devices, the Mupas Biometric tracks anomalous events and reports them to the Mupas Online Portal. You can link the Mupas Biometric watch to the MUPAS system using the Mupas Portal Buddy app.
Opening the ship
When you open following items.
● Watch strap
● Watch face
● USB Cable
● USB Charging
Does your watch look like it has been opened? Yes, it has.
We performed diagnostic testing and charged your watch to meet shipping regulations. Your watch is now turned off.
Attaching the strap to the face
Attach the straps to the watch face as shown using the provided pins.
Charging your watch
There are a few things to consider when charging your Bangle.js Watch safely
● Do not force the cable on—if the magnet does not pull it into place, it's the wrong way around and could damage your Bangle.
● Unplug the cable from USB after charging—the magnetic connector can attach to metal objects and short-circuit.
● Only use the official 4-pin Bangle.js 2 charging cable—other cables may cause irreparable damage to your watch.
● Reconnecting a fully charged watch will cause it to vibrate as a notification
Connect the charging cable to the back of the watch and plug the USB A connector into the provided charging block. A magnet is included to help you get the connection correctly When it holds by itself and the watch vibrates, you know you are all set.
When charging your watch, ensure the cable exits to the right for proper connection.
Turning on the watch
Once charged, you can power the watch. The Bangle.js watch has a single button located on the right-hand side.
Turning On the Watch
● Press the button to start Bangle.js. A welcome screen will appear with further instructions.
● If the watch is off, press and hold the button for about 2 seconds to turn it back on.
Important Notes
● Release the button as soon as the screen turns white. Holding it too long will enter bootloader (DFU) mode, requiring you to hold the button again to exit.
● The button is tactile—you should feel a click when pressing. If not, try pressing a bit harder
● If your watch does not turn on, charge it for an hour or two before trying again.