Engineering Update - June 2021

Page 1

Sponsored by






M A N U F A C T U R E June 2021







TF Automation manufacture special purpose machinery across a wide range of industries, specialising in process automation and product assembly, testing and handling. Also featured this issue: manufacture special purpose machinery across a wide range of industries, TF Automation

specialising in process automation and product assembly, testing and handling.

June 2021



recommended suppliers WWW.HONE-ALL.CO.UK









June 2021













Thermal Management for Electrical Enclosures

Tel: +44 (0) 1206 575755 Email:

instruments ltd

TVR Instruments Limited 143 Butt Road, Colchester CO3 3DP Essex United Kingdom


June 2021


Wendy McManus 01843 267 690

June 2021

At the forefront of digital marketing, Engineering Update strives to bring its readers the latest in industrial engineering, in a format that provides the best usability and ease of use for it’s readers.

Editorial Assistant

Taylor Owens 01843 448 443

Publishing Director

Jodie Little 01843 448 443

Publication Manager

Tim Johnston 01843 448 443

Publishing House

Jet Digital Media Ltd, Suite 1 & 2 Spratling Court Offices, Spratling Street, Manston, Kent CT12 5AN

June 2021


C.K SURE DRIVE SOCKET SETS AND RESCUE SETS ENGINEERED FOR GREAT RESULTS Leading brand C.K, has been at the forefront of hand tool manufacturing for over 100 years, offering a superb range of innovative, high quality products, engineered to offer high performance, durability, accuracy and strength. The C.K Sure Drive Socket Sets are no exception and successfully combine premium quality with high performance, manufactured from forged chrome vanadium alloy steel, making each part resistant to rust, as well as providing excellent longevity. Each set features the C.K Sure Drive System which applies torque evenly to the flats of the nut, alleviating the risk of rounding-off. Three Sure Drive Socket Sets are available within the range: A ¼” 36pc Socket and Bits Set (T4660); a ⅜ ” 23 pc Socket Set (T4661); and a ½” 24 pc Socket Set (T4662), all offering these great features and benefits: 6 and 12-point Sure-Drive sockets, which apply torque to the flats of the nut, rather than the corners, to avoid rounding-off; 72 fine-tooth ratchet drive for precision adjustment and restricted access operation; plus a handy durable case with custom inlay, and robust clip fastener for secure tool storage.

C.K to the Rescue C.K’s innovative Rescue range provides the perfect solution for those tricky tasks and includes the C.K Rescue Nut & Bolt Extractor and the C.K Rescue Hex Key Set. The perfect companion for the Sure-Drive Socket Sets, the new C.K Rescue Nut & Bolt Extractor (T4360) is a must-have for toolkits, quickly and efficiently removing broken or damaged nuts, bolts and fasteners. The Rescue Hex Key Set is the hero for your tool kit, specifically designed and engineered to make light-work of damaged or rounded hex bolts and the Rescue Nut & Bolt Extractor Set is a real time and effort saver for engineers and maintenance professionals, with its high quality patented extractor inserts for Ring Spanners and Sockets, that securely grip all round, and effortlessly remove fasteners with up to 85% damaged or worn corners. Contact your local C.K stockist to find out more about these innovative products or visit


     

4 Comm ports, inc Ethernet Built-in data logging to microSD Free no-limit programming Slim stackable design Multiple i/o wiring options Starter kit available +44 (0)20 3026 2670

Lamonde Automation Limited Quality Products: Expert Advice

June 2021


Using the power of the cloud. Closed Loop Finite Scheduling System

SFJ Systems, based in the UK, is a nationally recognised software company providing an impressive range of Cloud based scheduling solutions. Founded in 1995, the company continues to serve clients across the general engineering, food processing, electronics, transport, aerospace and the oil and gas industries. The team at SFJ use the latest secure cloud-based technology to deliver solutions tailored to your specific business problems, as opposed to simply selling and configuring software. This approach enables the SFJ team to continually refresh their software solutions with the latest technology which can be accessed from anywhere in the world using standard, modern, web browsers like Chrome and Edge. The SFJ team are specialists in deploying closed-loop finite scheduling solutions that automatically generate production orders that link directly into your current systems. Our solutions produce a single integrated view of the master schedule and allows you to optimise activity on the shop floor, monitor progress, and continually improve your efficiency. The reasons our solutions are recognised as market leading; • Designed by individuals with over 30 years' experience in industrial engineering • Developed by a dedicated team of highly qualified software engineers • Use of the latest prediction algorithms configured to suit your factory • Focus on diagnosing and enhancing data quality

• Identification of historic trends, and clever prediction • Advanced data visualisation, dashboards, and reports • Auto update to changes in master data • Issue control on parts • Quick last-minute route card changes • Shop Floor data capture and viewers

SFJ recognised early that successful projects require understanding and experience at all levels of management and the shopfloor, so they assembled a team of experts that have experience at each level, and work together on each project. If you are interested in knowing more, a library of successful case studies is available that demonstrates how SFJ has delivered benefits across many industries, over many years. More information and Videos are available on our web site Tele: 01225 775103


June 2021


Advanced Engineering is back with a bang in 2021 The UK’s leading annual gathering of engineering and supply chain professionals, Advanced Engineering, will return to the NEC, Birmingham on November 3 and 4, 2021. Here, the UK’s talented and vast engineering industry will come together again to begin generating business for 2022 and beyond.

With pilot events successfully being carried out across the UK, Easyfairs, the organiser of Advanced Engineering, is currently working on making sure that the event will be executed safely and in line with any recommended requirements in place at the time. Advanced Engineering is set to bring together engineering professionals from all sectors and industries. The show offers a diverse range of exhibitors the opportunity to showcase their expertise, and offers engineering professionals the opportunity to source new products and solutions, as well as hear from a wide range of speakers in the free-toattend open forums. Bringing together thousands of attendees from OEMs, tier 1 manufacturers, and supply chain partners, Advanced Engineering is the UK’s leading annual advanced engineering and manufacturing event, promoting supply chain business and technology transfer across any sector that involves highvalue manufacturing, R & D and innovation. Building on the success of the 2019 show, which attracted over 15,000 professionals from the manufacturing sector, Advanced Engineering 2021 is the place to present exciting product launches that have been waiting to be revealed for over a year. The show focuses


on all aspects of engineering, from materials and production, design, test and measurement and inspection across a wide range of sectors including aerospace, automotive, composites, marine, medical and more. This year, there will be an exciting new Space and Satellite zone, supported by ADS and UK Space, with innovative feature exhibits and headline topics in the Aero and Space and Satellite Forum. For the first time ever, Advanced Engineering will be co-located with its sister show, Lab Innovations. A long-awaited opportunity, this means that visitors can move between the two shows without even leaving the hall.

Advanced Engineering runs a series of online events throughout the year, AE Talks, giving exhibitors and visitors the chance to stay connected, learn from key industry leaders, and stay up to date with the newest developments. For those interested in attending, regular updates will be shared on the Advanced Engineering website. Register your interest at register-your-interest We look forward to having you at the show in November.

3 & 4 November 2021, NEC Birmingham The UK’s leading annual gathering of engineering supply chain professionals

SAVE THE DATE I found the event a great networking opportunity to meet industrial professionals from different backgrounds with different products. Kat Clarke, Wing Manufacturing Engineer, Airbus

10,000+ engineering professionals in attendance


exhibitors showcasing their products/services


hours of free-to-attend industry content

Benefit from co-location with: AERO ENGINEERING







REGISTER YOUR INTEREST +44 (0)20 3196 4358 |



he innovative design features and benefits of a robust pressure sensor have been recognised with the Innovations Showcase Award which was recommended by a panel of experts at the recent Process Expo event in Chicago. The award, within the Dairy Product category, was given to sensing and instrumentation specialists BAUMER for their PP20H pressure sensor. The sensor prevailed against the 17 finalists due to its wide range of features ensuring outstanding performance in challenging hygienic applications. A senior product manager at Baumer confirmed that features such as a condensate resistant silicon measuring cell providing exceptional precision across the entire temperature range, combined with an IO-Link interface, were pivotal to the performance of the sensor and to securing the award. An IOLink interface is the latest trend for these types of sensor hence its incorporation into the PP20H sensor. However, Baumer pushed the boundaries to ensure additional benefits for customers, such as additional analogue output which when combined with digital IO-Link interface, offers users even more flexibility than other pressure sensors. The result of these features means that during commissioning of the sensor, users benefit from all the IOLink advantages ensuring simplified sensor parameterisation whilst still allowing optimum process control by the sensor via the 4-20mA analogue output. Furthermore, the IO-Link means users can call up additional process data such as the pressure of the measurement cell, or the temperatures of the pressure sensor and even the microchip in the central processing unit.


Access to this information allows for crucial investigations, such as whether an unusual temperature rise has occurred in a container which may indicate a defect or faulty dosage of ingredients in a tank. As high temperatures may decrease the service life of the sensor or other system components this acts as an important early warning for the need for preventative maintenance, one of the promises of Industry 4.0. The PP20H sensor also exceeds all standards in terms of robustness as its measurement cell is completely sealed, even during relative pressure measurement. This prevents the ingress of warm and humid ambient air, which in certain applications may precipitate with low process temperatures, for example in milk or ice cream processing. At the same time however, the sensor must be ‘open’ to the surroundings to enable users to determine the difference to the ambient pressure. To resolve this Baumer engineers devised a unique solution by placing a barometric pressure sensor in the back of the sensor housing which measures the reference pressure of the environment via an opening. This design ensures an actual silicon measurement cell in the front of the sensor which remains hermetically sealed. This means the PP20H sensor is not only suitable for CIP (Clean in Place) and SIP (Sterilisation in Place) processes, but also in applications where sudden changes in process media temperatures can occur. The compact PP20H sensor covers a wide media temperature range from -20º to 125ºC without the need for a cooling line, so less space is needed for installation. Also, a wide variety of applications can be covered by just one sensor model ensuring cost and space savings. For more information click here.


June 2021



AND REPEATABILITY Pressure ranges from -1…1000 bar Accuracy class 0,05 %FS Event-controlled or interval-based recording Up to 57,000 measuring points ATEX option available

we make ideas come to life

RMIG is the world’s largest manufacturer and supplier of perforated metal and its related products. We know our customers’ requirements for price and quality and meet their demands with uncompromising service. Not only do we offer standard and bespoke perforated metal sheets, we are able to offer you a range of secondary operations as detailed below. Complete solutions With a continued investment in the latest equipment and a network of professional partners we are able to produce prime quality products and solutions – from a simple perforated sheet to the fully formed and coated custom made part.

Cutting We can cut and shape perforated sheet to meet the needs of your final application. Levelling For some applications a high degree of flatness is required, we have processes in place to ensure our perforated coils and sheets meet with your most demanding requirements. Rolling and forming We can roll, bend and form perforated sheets to match your design. Aesthetic finishes and protective coating We can offer powder coating and hot dip galvanizing solutions to meet your specifications.

For more information please contact us tel: 01925 839610 | email: |


June 2021


Making lifting equipment more affordable Lifting equipment specialist, Konecranes, has welcomed the introduction of the tax superdeduction initiative as a massive boost for UK industry. Under the scheme, announced in the Chancellor’s March budget, companies can claim 130% capital allowances on qualifying plant and machinery investments made between 1 April 2021 and 31 March 2023. This upfront super-deduction will allow companies to cut their tax bill by up to 25p for every £1 they invest. Firms will also benefit from a 50 per cent first-year allowance for qualifying special rate assets, including long life purchases. The policy has been introduced to encourage investment and promote UK industrial recovery from the COVID-19 pandemic and the associated lockdown.

Konecranes’ RENTALL package is helping to make the acquisition of new and state-of-the-art lifting equipment more affordable. The launch of the HM treasury scheme comes at a time when Konecranes has been introducing its own initiatives to promote industrial investment and make the acquisition of new lifting equipment more affordable. In addition to flexible finance options and extended credit arrangements, the company has also launched its RENTALL programmes. RENTALL represents a packaged approach to operators’ material handling requirements, combining the lease of the lifting equipment with service regimes, maintenance plans, spare parts and remote performance monitoring. The equipment and support are provided for a fixed term and for a regular monthly payment, providing predictable fixed costs for the material handling system and its maintenance. It also eliminates large upfront investment for improved cash flow. The initial crane specification process is simplified as Konecranes tailors each RENTALL agreement to the lifting capacity and operations required, including any special processes.

RENTALL is available for material handling applications of up to 10 t. The scheme not only allows users to invest in new technology, but also allows stateof-the-art smart technology features to be incorporated, boosting productivity and enhancing safety. RENTALL may also incorporate Konecranes’ TRUECONNECT® remote monitoring digital platform, which provides a realtime overview of crane performance and safety status. Such data can be used to improve lifting processes and highlight preventative service and maintenance requirements. RENTALL has been designed to be a totally flexible solution, allowing customers to future proof against changes in material handling requirements. The package provides the option to upgrade equipment, technology, smart features and software at any time during the agreement period, to meet different operational needs. Paul Bartlett, Konecranes’ UK Industrial Cranes Sales & Operations Director,

Email: 12|

stated: “Brexit and the UK’s emergence from the COVID-19 lockdown are creating significant business opportunities for many companies in the logistics, industrial and manufacturing sectors. Inevitably, some operators will need to invest in new and smarter material handling solutions to take advantage of such opportunities.” He added: “Konecranes has responded by introducing flexible finance options and the RENTALL scheme, which will make the acquisition of lifting equipment and associated services more affordable. Subject to meeting the qualification criteria for the tax superdeduction initiative, companies may also make significant additional savings. In short, there has been no better time to purchase new and upgraded material handling systems. Konecranes will not be offering specific advice on the tax super-deduction scheme and we are recommending that companies planning to take advantage of the programme should consult with appropriate financial professionals.”





The Cygnus 4+ General Purpose thickness gauge is a light, tough multi-mode thickness gauge. It features a sunlight readable LCD display with Live A-scan, intuitive menu and sequential data logging for easy reporting & analysis.



...plant maintenance, civil engineering, marine structures, ship inspections, oil and gas facilities, offshore platforms, wind farms, rail infrastructure, metals protected by thick/special coatings.


June 2021


New Product: M81 Synchronous Source Measure System

An innovative architecture for coordinating low-level measurements from DC to 100 kHz - Coming soon! The MeasureReady™ M81-SSM (Synchronous Source and Measure) system provides a confident and straightforward approach for advanced measurement applications. The M81 eliminates the complexity of multiple functionspecific instrumentation setups, combining the convenience of DC and AC sourcing with DC and AC measurement, including a lock‑in’s sensitivity and measurement performance.

View the M81 here The M81-SSM uses patent-pending MeasureSync™ signal synchronisation, enabling continuous data sampling on every channel. Noise and sensitivity are on par with the best scientific-grade source and measure instruments.


Features • Unique real-time sampling architecture for synchronous sourcing and measuring • Designed for scientific-grade lowlevel measurement applications • The absolute precision of DC plus the detection sensitivity performance of AC instrumentation • Unique, flexible instrument/ distributed module architecture

Find out more about M81-SSM research applications


June 2021

Reich Couplings Keeping Industry Moving





Competence in power transmission whatever your industry or application



Reich Drive Systems UK Limited Unit 4 Bankside Business Park


Coronation Street Stockport SK5 7PG T: + 00 44 161 714 4191 E:


Articulated Torsion Pipework In Hoses Rotating Cylinders

Swivel Joints Swivel joints allow pipework to

Rotary Torque Transducers • 10mNm up to 13,000Nm • Analog & Digital Outputs • ±0.1% Accuracy

• Non-contact digital strain gauge torque measurement





Fluid Carrying


pressure 1/4” to 40” and beyond. Vacuum to over 20,000psi. Stock and bespoke production. Unique bearing/seal design for longer life. ISO 9001 CE marked where applicable.


Bingswood Trading Estate Whaley Bridge | High Peak | SK23 7LY | UK

+44(0)1663 735003



Tel: +44 (0)1869 238400 Web:



June 2021

The nuts and bolts of confident bonding. Bondloc is an ISO 9001:2015 certified UK manufacturer of industrial adhesives and sealants with over 2000 adhesive formulations in their portfolio. The business was built on anaerobic adhesives over 25 years ago and this core range still accounts for over 40% of their UK sales. But what’s the secret of this little genie in a bottle and why is anaerobic chemistry still such an integral part of engineering and maintenance today?

Threaded fasteners were invented more than 2,000 years ago and are still widely used in machinery design and assembly, although usage is declining. These traditional fastening methods have many flaws; they can selfloosen, particularly under the stress of heat or vibration, resulting in downtime, quality issues, recalls, corrosion and increased maintenance. Regardless of how small the gap, side to side movement of the bolt within the nut caused by operational vibrations will eventually cause the bolt to loosen, with sometimes catastrophic results. Anaerobic threadlockers replace mechanical threadlocking devices and offer tangible benefits in terms of productivity, efficiency and safety. These single component acrylic polymers have an anaerobic cure system that remains in a liquid form until air is absent and contact is made with metal ions. A liquid threadlocker will fill all voids between mating threads and solidifies to form a thermoset plastic that unitises the assembly. Threadlockers also coat the entire thread and are resistant to water, solvents and oils. They serve the dual purpose as sealants and prevent corrosion from liquids, gases and air-born contaminants such as dust which would otherwise compromise bolted assemblies. Clean-up is easy since any excess adhesive remains as an easily wiped-away liquid. Bondloc has an extensive portfolio of threadlocking adhesives, including COSHH free safer products. They have varying differentials in viscosity, strength, temperature resistance, cure speed and flexibility. For more specific or unique applications, formulations can be modified and then manufactured in-house. Either way, to determine the best product to use for the job, three main questions must be asked. What’s the fastener size? Which strength is needed? How frequently will the assembly need to be serviced?

But should we also challenge the efficacy of the products we purchase by asking our suppliers if their published data stacks up? The answer is most definitely, yes. Every adhesive product purchased is underpinned with a technical data sheet and a material safety data sheet. Continual quality testing and benchmarking of products versus competitors is common practice at the Bondloc laboratory by independent technicians. The most recent tests have shown yet again that product performance not only consistently meets the published data but also exceeds its peers’ performance. Bondloc is confident in saying, they won’t be beaten on price or performance. The Bondloc technical team welcome calls from industrial adhesive users to discuss specific projects, challenges, data, free sampling and potential cost savings. Contact the team today and put Bondloc products to the test. Let’s Stick Together. Bondloc UK Ltd


June 2021


Using Automation to stock Electronic Components A good system for managing electronic parts is essential, no business wants to waste time hunting for components which are required for production projects.


he requirement to manage thousands of individual electronic components and manage customer expectations means that smarter solutions are required by the industry. Running high-mix production is labour-intensive. Time is required to manage the flow of components needed for frequent setups and changeovers within the industry and this means high costs in relation to hunting down missing components. This is no mean feat and clarity is required on how best to store, locate, and manage stock. Traditionally storage cupboards were used to stock small components such as Chips (ICs), and other semiconductors in plastic bags. Larger stock such as passives THT capacitors, SMD resistors, THT resisters and SMD reels need a more optimised solution. One of the reasons storage space is such an issue for the electronic industry is the speed of change and keeping up with constant technological evolution. Most electrical component failure is caused by excess temperature, excess current, mechanical shock, or impact. A static charge can impact electronic components to the point of failure. It’s important to have full control over humidity and temperature levels to protect sensitive components. Unit temperatures may range from -25 °C to 60 °C and unit humidity can be reduced by up to 5 %, when necessary. When working with electronics, automation can give you the security to implement solutions that meet industry requirements such as Fire protection, EDS protection, and clean, dust-free storage which in some cases is required.


BD Sensors is a manufacturer of electronic pressure measurement devices and they wanted to modernise their environment and increase productivity. The company moved to an automated model to stock their components and operate a pick and pack process at their production plant. They purchased five automated Kardex Shuttle vertical lift systems which are built across several mezzanine floors for speedier access for storing and retrieval in parallel. They now have a faster picking and retrieval process for their mixed sized/weight components and it’s all controlled by a WMS (Kardex PPG) software system. Today BD Sensors has reached nearly 100% accuracy and the company has increased their number of picks by 50%. They also massively reduced their footprint and were able to reduce the number of operators to two-thirds. The combined solution delivered automated order assignment, batch picking using a multi-user picking strategy with dedicated colour picking and KBS indicator lights for ease of use as well as LED pointers to show exactly where the component to be picked was located. They also utilised special Picking trolley’s with integrated colour picking technology. The move to automation increased their productivity, it released space and the software gave them performance data which is delivering transparency and understanding on their orders and transactions. To learn more about how automation can benefit your production click here and download the free white paper. Or contact Kardex at









+44 (0) 1844 204420 Email us at

Ecopac (UK) Power Ltd, Unit 4, Ridgeway, Crendon Industrial Area, Long Crendon, Bucks, HP18 9BF

June 2021


Crystal Display Systems partners with Litemax Electronics to offer High Quality, High Brightness Panel PC Solutions CDS, as a Displays specialist, supply an extremely broad range of interactive HMI PCs, with a choice of processor and chipset combinations. Now these offerings are even stronger with the addition of high brightness panel PC offerings with Litemax.


rystal Display Systems (CDS) is proud to announce as a part of its 2021 expansion that is has signed a distribution agreement to become the Litemax Corporation’s UK distributor and value-added support partner in the UK for its High Brightness Industrial Panel PCs. Both Litemax and CDS are well known in the European Industrial Displays market which creates an extraordinarily strong partnership to support all industrial Display customers across Europe. CDS will promote, stock, and support the Litemax range of ruggedised IP65 and IP68, standard and narrow bezel Panel PCs as well as look at OEM / ODM customised bespoke solutions for many customers from many industries including Defence, Aerospace, medical, outdoor, marine, MilAero and various industrial applications. Litemax's panel PCs are like no others and comes with the industry's best high brightness LCD displays, in addition to the versatile, powerful box PCs, so you get the best of both worlds and CDS will promote the Mix and Match solutions where the customer can make their own choice of Display, brightness, type of

touchscreen, select a processor, as well as housing to give the optimised solution. This is a unique service and solution that CDS is bringing to the UK and Europe. CDS’s Managing Director Chris Bartram having signed the deal said, “we feel this is an excellent agreement for CDS, Litemax and potential industrial customers as we bring the highest quality products to many industrial sectors and markets.

Our technical sales team and project focused processes mean we can help and advise customers where needed on the best optimised solution for their specific application. We will be highlighting and marketing a number of these solutions over the next few weeks, so people get a great overview of the advantages as well as the options available now. Companies with such requirements should contact us to discuss their projects and requirements.”

Key Features of the Litemax High Brighntess Panel PC Range • 10.4” – 21.5” (standard aspects, core range), other sizes available upon request • Up to 1600cd brightness • Mix and match PC platforms from intel Atom to Core i7 / AMD Ryzen-V • High accuracy multi-touch PCAP touchscreens

• Barebone solutions • Wide power inputs from 9V-36V *optional extra • IP65 front face up to full waterproof IP68 solutions • High reliability fanless with no moving parts • Lockable power connectors • Various aspect ratios

CDS is looking forward to in partnership with Litemax beginning its promotional programme to help support customers in every way it can. Please visit click here for more information. Let the CDS team help you with any android display projects. Email them on or call +44 (0) 1634 791 600.


June 2021


Extreme temperature or pressure products

and the critical problem of vapour permeability


xtreme conditions are more common than you would think, they don’t only occur in extreme environments but also in the tightened seals on many products, the heat of engines or motors and even in the electronics of many devices. Yet they need seals to keep out water vapour, hydrocarbons and other contaminates if they are to continue working, Versaperm can help. Versaperm’s vapour permeability systems can measure how well seals, pipes, electronic enclosures and general materials do this across a wide range of temperatures and pressures, from -80 to 1100C and from 0 to 300bar. Higher ranges can be made available if the demand arises. All materials and seals are affected, often severely, in their task by the combined factors of temperature and pressure. There is a fundamental problem with many engineering seals, enclosures and casings – they don’t work as well as they could or should! Just because a seal keeps out water, grease or other liquids, people think it is working properly. But they forget about vapours, which can pass straight through materials such as seals and sealants, sometimes in great volumes - before condensing on the wrong side and causing problems. The temperature and pressure conditions that are commonly found in the real world can amplify this and extreme conditions make the problem even more critical. As an example, gaskets, seals and O-rings made from silicone, cellulose, EVOH or PVOH are great at keeping liquid water out, but are virtually useless where water vapour is concerned. Numerous products have failed and been recalled for this reason.

O-ring and seal permeability


Permeability of valves seals and connections The Versaperm system uses a mass spectrometer to measure permeability for water vapour, grease, hydrocarbons, aromatics, CO2, solvents and every other vapour / gas in general use. This gives designers and manufacturers the ability to test and effectively eliminate problems across almost all standard and most nonstandard environmental and operational conditions. The system can also simulate diurnal, seasonal and other changes and it achieves results that are accurate in the PPM (Parts per Million) to PPB ranges. It can optionally measure several materials, seals, enclosures, components or products at a single time. Versaperm also runs consultancy and laboratory services which offers advice on permeability in complex cases or where the volume or logistics do not mandate a dedicated instrument.

e.mail: Web: UK Tel: +44 (01628) 777668 USA Tel +011 (617) 500-8607

Extreme conditions vapour permeability

Protecting Your Plant Before

Rotech Motion Sensor’s can be used whenever information or monitoring of shaft rotation, position, direction, speed, slip etc is required! Rotech Motion Sensor’s can be used for indication, control, interlocking, protection, sequencing, alarm initiations and many more functions! Rotech Motion Sensor’s can be used wherever materials are transported or processed By conveyors, elevators, screws, mixers, etc!






RELIABILITY Tel : +44 (0)151 356 2322 Website: Fax: +44 (0)151 356 2437 Email:

Monitoring the world

June 2021


Sensonics Expand Calibration & Site Support Services SENSONICS is one of the UK’s leading suppliers of turbine supervisory and high integrity protection equipment to industry. This position has been established thanks to over 40 years of experience in providing vibration, position and speed instrumentation solutions. We are now delighted to confirm the expansion of our service offerings supported by important investment which helps us to meet the growing and changing requirements of our customers.

We have always recommended that critical sensing and protection equipment is maintained and calibrated annually to meet accuracy and efficiency demands whilst also following industry best practice. Return to base calibration services have always been offered for our sensors and systems yet we recognise that flexibility in meeting this best practice is vital to customers. It is not always easy to dismantle and return critical monitoring equipment and that outage planning is complex and variable. Our expanded on-site calibration services include experienced site engineers backed up by UK manufacturing and specialised


engineering resources. Calibration of vibration sensors and proximity probes is a service we offer on-site and this can be extended to confirm the accuracy and alarm functionality of the complete measurement loop. Where sensors and monitoring equipment require separate calibration, we can provide signal injection methods to confirm the monitoring equipment in-situ and with UKAS traceable calibrations in our laboratory. Fast turnarounds are also available on request along with upgrades and refurbishment services for obsolete equipment.

the dynamics of turbines, pumps, fans, compressors and motors. All equipment is designed and manufactured in the UK and therefore our site calibration team have a wealth of expertise to fall back on to support your maintenance requirements and to minimise your downtime.

For more information click here Further details on all our calibration and site support services are available from: Jason Kingdom, Sensonics Ltd, Berkhamsted, Hertfordshire UK. Tel: +44 (0) 1442 876833. Email:

Sensonics specialise in providing sensing systems for monitoring



DUE TO POPULAR DEMAND, LIFTEX - THE LEADING NETWORKING EXHIBITION DEDICATED TO THE LIFTING INDUSTRY - IS COMING TO THE MIDDLE EAST! The 2-day exhibition will be hosted by LEEA (Lifting Equipment Engineers Association), the global representative body for the lifting industry worldwide, under the patronage of Bahrain’s Ministry of Labor at the Gulf Hotel & Convention Centre, Bahrain on 27-28 September 2021.

If you work in the lifting and rigging industry or you want to learn about the latest solutions in the local marketplace, then you can’t afford to miss LiftEx 2021. Network with other like-minded professionals, gain advice on the latest regulations and best practice to save you time and money.

To find out how you can get involved as a Sponsor, Exhibitor or Visitor, please email or call on +44 20 3488 2865. Follow us @LiftEx2021 #LiftEx21 |

June 2021

Fortress Technology has expanded its new range of intelligent inspection systems for food manufacturers developing IoT lines, including an XL version for bulk applications. With three models now in the family, the ’smart’ Raptor checkweighing series uses digital process monitoring technology to advance inspection efficiency, target operational inefficiencies and slash product giveaway.


edefining how machines and humans interact in future food factory settings, the Raptor series now com prises a com pact modular Raptor combination metal detector and checkweigher, a single frame high-spec checkweigher, and XL caseweighing version for ingredient and large applications. Designed for new-generation manufacturers embracing the digital revolution, the Raptor series addresses major changes on the horizon, including how humans and machines will work even closer together in the age of AI. With the World Economic Forum forecasting that half of all work

tasks will be handled by machines by 2025 , the Raptor series merges high performance machines and digital data capabilities with human critical thinking. To assist operatives working alongside these smart machines, Fortress has invented numerous advanced time-saving features. Including ‘notool’ maintenance, automated COP conformance checks, a totally unique conveyor motor release for ultrafast machine sanitation, plus secure remote access. Guaranteeing absolute traceability and consistent weighing results, the Raptor instantaneously captures sample



readings of individual packs by the millisecond. Only possible by using the most advanced ARM processors, this data capture and analytics is a game changer for food factories concerned about product waste and giveaway. Saving valuable time and money, the Raptor introduces an innovative, failsafe, paperless, fully auditable COP test routine. The only known inspection machine on the market to configure every test by retailer and product being inspected, Raptor gives food manufacturers the assurance that test steps are never overridden or bypassed. Using a beacon to alert machine operatives when a test is due, if not performed by the deadline, the Raptor system halts and an alert is generated and sent direct to the factory’s QA or technical manager. For extra cleanliness and tougher hygiene control, Fortress unveils a new tight fitting conveyor and ‘no-tool’ maintenance concept. Overcoming the longstanding industry challenge of loosening belt tension during machine sanitation, in just seconds operators unclip and disconnect the Raptor conveyor motor and lift out the entire conveyor assembly for maintenance and cleaning. Belt tension and alignment are instantly restored when clipped back into place.

All three Raptors also feature customisable swipe touchscreens, allowing users to select the statistical information and trends that are most relevant to their food operation. For 24/7 support and to eliminate machine downtime, every Raptor is fully configured to provide remote and secure access. To book a Raptor online demonstration, please contact


Designed to suit any case or large bag application weighing up to approx. 50kg, the Raptor XL reject station can be customised to remove non-conforming products from the line.

Curtiss-Wright Surface Technologies, Everlube products & Coating Services Protection & life extension of your critical components throughout any crisis!

COATING SERVICES: l Thermal Spray & HVOF Coatings l Dry film lubricants - MoS2, PTFE, Graphite, WS2 l Coatings for corrosion, chemical & environmental protection l Titanium anodising l Zinc rich coatings for corrosion protection l Impingment coating processes for ultra thin solid film lubricants l Nonstick/release coatings for low coefficients of friction l Primers for rubber and plastics for sound absorbing and dampening materials l High temperature resistant coatings l Rare earth magnet coatings l Coatings for EMI/RFI shielding provide highly conductive coatings and platings to control electromagnetic interference l Ultra thin conformal parylene coating to reduce friction and protect against contamination l Pre-treatments including Ti Anodising, Phosphate Conversion Coating and Chilled Iron Blasting, Aluminum Oxide Blasting and Vapour Degreasing

Coating Services and Everlube Products ®

+44 (0)1386 425758 | |

June 2021

CWM Automation Launches New Website Following a period of progressive growth, both in an increased number of projects, and a newer, larger factory space, CWM Automation decided it was time to update their website. CWM Automation specialise in manufacturing robust and reliable filling machinery, as well as end of line and bespoke projects. With over 15 years’ experience in the automation industry, CWM has worked with a wide range of sectors, building machinery to meet exact customer requirements. When it came to website planning, CWM’s primary goal was to create a customer-centric platform. It was vital that the website effectively showcases their wide range of solutions, from filling machinery through to their controls and electrical expertise. Through adding a more extensive about us page, as well as a meet the team section, CWM are able to highlight the people behind the company whose expertise has helped to drive business growth.


Easy navigation and responsiveness were also key factors highlighted during the planning stage. CWM were keen to make navigation as straightforward as possible, allowing users to find the information they are seeking in the least amount of clicks possible. Another key feature of the website is the addition of a ‘Request a Quote’ button, meaning that users can conveniently alert CWM’s sales team that they require a quotation.


CWM chose to work with Lincolnshire-based company Laser Red, due to their award-winning experience of website development and SEO management. Launched in May 2021, CWM’s new website is responsive, user-friendly and successfully displays their solutions and expertise. Mick Williams, CWM’s Managing Director, commented on the website redevelopment: “CWM have evolved a lot over the last few years. We offer many more solutions to many different sectors now and will continue to add to that. Therefore, we know we had to have a much slicker, customer-centric website to showcase our offerings and to be flexible for the future. Laser Red have proved to be a great choice as partner for the redevelopment and working together we have surpassed our expectations with the new website.” Following the website launch, CWM will be continuously updating their website with engaging blogs, company announcements and case studies. Visit CWM’s new website: and stay up to date by signing up to receive their marketing emails.

Join the

world’s most popular

virtual exhibition

Whether you are visiting or exhibiting, you can experience being part of the latest Super HD 3D exhibition at IndustryExpo. The show is open 24/7 and features the latest products from a range of the world’s leading brands. Book now to reserve your stand or find out about our exclusive offers for online product launches, seminars and conference packages. IndustryExpo, reaching a wider industry audience…

E T: 01892 956492 E: T: 01892 956493

June 2021


How to choose a comprehensive simulation and offline programming software for your automation needs Diverse production automation needs the most suitable software. There are many different types of industrial software available on the market. You may find it difficult to immediately judge whether a specific software ticks all the boxes you need for the digital transformation of your shop floor. To support your search for the right software solution for all your automation needs, we put together a comprehensive questionnaire.

Identify core issues in production and define your specific needs in relation to your existing software and hardware configuration 1. Do you use multiple brands of robots in your factory? 2. Do you use different CNC driven machines and need to write NC code? 3. Do you use PLC controls and need to troubleshoot PLC ladder? 4. Is your company ready to deal with small-batch and product changes effectively and how often? 5. What CAD software does your company already use for Product /Project design or to interface with external supplier or customer data? 6. Make a list of questions and discuss them with your department heads.

Match your robot and machine requirements with the features of different software solutions 7. Does the software support multi-brand robots and/ or CNCs in the same session? 8. What are the size or format or compatibility restrictions of part or tooling data import? 9. Does the software process CAD data for all mayor CAD systems (e.g. Solidworks, CATIA, Inventor, Siemens NX, PTC Creo, etc.) without loosing CAD math kernel data? 10. Can the software communicate with product and tooling design by means of e.g. CAD export as exact geometry or only as tessellated? 11. Does CAD system prefer to get exact surface geometry back from the Simulation software (e.g. Parasolid) or in Tessellated (IGES) format, so that data is not lost or corrupted? 12. Can the software cope with complex trajectory programming within itself, without a need to connect to another CAD/CAM software or scripting? 13. Can software simulate more than just robot motion, so that I can validate an entire process of loading a part, closing clamps/grippers, sensors locations, etc.? 14. Can software simulate (Logic, Behaviour) so I can make sure my programs are bound to work before loading in the production cell (line)?


Match your digital transformation objectives with the with the features of different software solutions 15. Does the software offer more than Offline Programming? What other aspects of smart manufacturing does the software support? 16. Can the software simulate an entire production line? Or is it restricted to a single production cell? Does the software support a “digital twin” concept?

Check User Experience and its costs 17. Is the software cumbersome to operate? Is the human-machine interface user-friendly? 18. How much training would your team need approximately? And what features does the software offer to pass on learnings and best practice to others?

Check Software Company Background and Service / Support availability 19. What services does the company offer and how is it charged? 20. Can the company support you in all locations (countries) you have production facilities? 21. Does the company offer support services beyond just sales and remote tech support?

If you want to check out how FASTSUITE, the Digital Factory Twin software from CENIT fits to your needs drop us a note at and we will come back to you asap.


June 2021

T +49 2961 7405-0 T +1 704 716 7022 T +39 02 62033057

Your Specialist for

EXPLOSION SAFETY and © REMBE® | All rights reserved

PRESSURE RELIEF SOLUTIONS Consulting. Engineering. Products. Service.



we make ideas come to life

RMIG is the world’s largest manufacturer and supplier of perforated metal and its related products. We know our customers’ requirements for price and quality and meet their demands with uncompromising service. Not only do we offer standard and bespoke perforated metal sheets, we are able to offer you a range of secondary operations as detailed below. Complete solutions With a continued investment in the latest equipment and a network of professional partners we are able to produce prime quality products and solutions – from a simple perforated sheet to the fully formed and coated custom made part.

Cutting We can cut and shape perforated sheet to meet the needs of your final application. Levelling For some applications a high degree of flatness is required, we have processes in place to ensure our perforated coils and sheets meet with your most demanding requirements. Rolling and forming We can roll, bend and form perforated sheets to match your design. Aesthetic finishes and protective coating We can offer powder coating and hot dip galvanizing solutions to meet your specifications.

For more information please contact us tel: 01925 839610 | email: |


June 2021


New Plug & Play Metal Additive Manufacturing Technology Available From TLM Laser The latest laser based technology to become available from Bromsgrove based TLM Laser is the new AL-3D Metal 200 additive manufacturing system. This innovative system brings a new dimension to metal additive manufacturing through the use of a cartridge based closed powder circuit. The ability to manufacture high precision components with impressive quality standards combined with unparalleled freedom, in terms of design and geometry, are just a few of the reasons behind the rapid growth of 3D printing. The additive manufacturing process also saves material and resources, by building a component layer by layer as opposed to having it machined from solid. The new AL3D-METAL 200 3D printer encompasses all of these properties and is characterised by its safe, clean and economic powder handling concept. The cartridge based closed powder circuit enhances safe working practices as the operator doesn’t come into contact with the powder at any point throughout the entire printing process. Specially developed for the precision mechanical, medical technology, dental and jewellery industries as well as research and development laboratories, this compact 3D printer offers optimum detail accuracy, precision and maximum safety in handling both the laser and the metal powder. A further characteristic of this system is the ability to produce layers of different material within the same component. This is achieved by stopping the print, changing the material cartridge and then re-starting the printing process.



June 2021

The AL3D-CARTRIDE is an intelligent plug and play cartridge based system which allows fast offline preparation of materials, and the cartridge containing the metal powder is simply loaded and located within the system ready for use. At the end of the build process, the componentisand unused powder The The AL3D-CARTRIDE AL3D-CARTRIDE an is an intelligent intelligent plug plug andand play play cartridge cartridge based based system system which which allows allows fast fast offline offline remain captive within the which then be The AL3D-CARTRIDE iscartridge an intelligent plugcan and play preparation preparation of materials, of materials, and the the cartridge cartridge containing transferred to a separate unpacking station. cartridge based system which and allows fast offlinecontaining

thethe metal metal powder powder is and simply is simply loaded andand located located preparation of materials, theloaded cartridge containing within within the the system system ready ready for for use. use. At At the the end end of the of the the metal is powder is simply loaded and located The cartridge inserted and located within thepowder AL3Dbuild build process, process, the the component component and and unused unused powder within the system ready for use. At the end of the CABIN – the unpacking station - in the which same way as remain captive captive within within thethe cartridge cartridge which can can then then be be build remain process, the component and unused powder the 3Dremain printer, allowing the operator to retrieve the transferred transferred to a to separate a separate unpacking unpacking station. station. captive within the cartridge which can then be sintered component and capture the station. residual power is transferred to a separate unpacking The The cartridge cartridge inserted is inserted and and located located within within thethe AL3DAL3Dmanner. a safe, ergonomic andis efficient CABIN CABIN – the – the unpacking unpacking station station in the in the same same way way The cartridge is inserted and located within the AL3D- as as thethe 3D printer, printer, allowing allowing thethe operator to retrieve toway retrieve thethe –3D the unpacking station - operator inis the as A 200CABIN W CW, 1070 nm Fiber laser at same the heartpower of is is sintered sintered component component and and capture capture the residual residual the 3D printer, allowing the operator tothe retrieve the power the system which delivers acapture 50 μm spot size,power and is the a safe, acomponent safe, ergonomic ergonomic and efficient efficient manner. sintered andand the manner. residual system can be used with a variety of metals including: a safe, ergonomic and efficient manner. A 200 A 200 WW CW, CW, 1070 1070 nmnm Fiber Fiber laser laser is at is the at the heart heart of of Iron alloys, Nickel-based alloys, Cobalt-chrome alloys the the system system which which delivers delivers a 50 a 50 μm μm spot spot size, size, and and A 200 W CW, 1070 nm Fiber laser is at the heart of and Precious metals. Two variants of the system, thethe system system cancan be be used used with aμm variety a variety metals of metals including: including: the system which delivers a with 50 spotofsize, and the AL3D-METAL 200 -50 and AL3D-METAL 200the –alloys Iron Iron alloys, alloys, Nickel-based Nickel-based alloys, alloys, Cobalt-chrome Cobalt-chrome system can be used with a variety of metals including: alloys 100 offer 50mm diameter x 50mm high of and 100mm Cartridges are inserted and located within the andand Precious Precious metals. metals. Two Two variants variants the of the system, system, Iron alloys, Nickel-based alloys, Cobalt-chrome alloys diameter x 60mm high build volumes respectively. the the AL3D-METAL AL3D-METAL 200 200 -50 -50 and and AL3D-METAL AL3D-METAL 200 200 – – AL3D-CABIN – the unpacking station - in the same and Precious metals. Two variants of the system, 100100 offer offer 50mm 50mm diameter x 50mm x 50mm high high and 100mm The system also boasts a-50 compact footprint ofand just Cartridges Cartridges are inserted inserted andand located located within within theoperator the the AL3D-METAL 200diameter and AL3D-METAL 200 – 100mm way as theare 3D printer,. This allows the to diameter diameter x 60mm x 60mm high high build build volumes volumes respectively. respectively. AL3D-CABIN AL3D-CABIN – the – the unpacking unpacking station station in the in the same same offer 50mm diameter x 50mm high 100mm 60cm100 x 60cm making it ideally suited toand any working Cartridges arethe inserted and located within and the capture retrieve sintered component the The The system system also also boasts boasts a compact a compact footprint footprint of just of just way way as as the the 3D3D printer,. printer,. This This allows allows the operator operator to to diameter x 60mm high build volumes respectively. environment. AL3D-CABIN –power the unpacking station - the in the same residual is a safe, ergonomic and efficient 60cm 60cm x 60cm x 60cm making making it ideally it ideally suited suited to any to any working working retrieve retrieve the the sintered sintered component component and capture capture The system also boasts a compact footprint of just way manner. as the 3D printer,. This allows theand operator to thethe residual residual power power is aissafe, a safe, ergonomic ergonomic andand efficient efficient 60cmenvironment. x environment. 60cm making it ideally suited to any working the sintered component and capture the According to Andy Toms, Director of TLM Laser: “This retrieve manner. manner. environment. residual power is a safe, ergonomic and efficient system is According highly intuitive toToms, use, you simply select a“This According to Andy to Andy Toms, Director Director of TLM of TLM Laser: Laser: “Thismanner. system system highly is highly intuitive intuitive to use, toofuse, youyou simply select a a cartridge with the desired material, insert it simply intoselect the According tois Andy Toms, Director TLM Laser: “This cartridge cartridge with with the the desired desired material, material, insert insert it into it into the the system is the highly intuitiveprint to use, simply printer, select desired fileyou from theselect toucha printer, printer, select thethe desired desired print print filefile from thethe touch touch cartridge withselect the desired material, insert itfrom into the screen interface and start the printing process” screen screen interface interface andand start start thethe printing printing process” printer, select the desired print file from the process” touch screen interface and start the printing process” This new This 3DThis metal printing technology is available new new 3D 3D metal metal printing printing technology technology is available is available from from Bromsgrove Bromsgrove based based TLM TLM Laser, Laser, Alpha Alpha Laser’s Laser’s from Bromsgrove based TLM Laser, Alpha Laser’s This new 3D metal printing technology is available UK UK and and Ireland Ireland distributors, distributors, and and just just part part of a of UK and Ireland distributors, and just part of a from Bromsgrove based TLM Laser, Alpha Laser’s a comprehensive comprehensive andand growing growing range ofoflaser ofabased laser based based UK and Ireland and just part comprehensive anddistributors, growing range ofrange laser technologies technologies and and systems systems offered offered by by the the company. company. comprehensive and growing range of laser based technologies and systems offered by the company. technologies and systems offered by the company.

E-Mail: E-Mail: E-Mail: Web: Web: Web: Tel: Tel: +44(0)1527 +44(0)1527 959 959 099 099 Tel: +44(0)1527 959 099 E-Mail: |33 Web:

Tel: +44(0)1527 959 099

June 2021



Automation have just completed the build of a repeat machine of one produced some 15 years ago for Intersurgical’s plant in Lithuania. Intersurgical is a global designer, manufacturer and supplier of a wide range of high-quality medical devices for respiratory support. TF Automation revisited the original design and have basically produced the same machine using the latest technology to laser mark the manufacturer’s logo and product reference on their Hydroguard Mini medical oxygen filters. The filters are autoloaded by robot onto a step-feed conveyor and into the Gravograph Laser Marker which marks both sides of the filter simultaneously with the two pieces of information. The feed-in and output are both to pre-determined amounts, with a filter being laser marked every 5.3 seconds. The new machine was required because of an increase in demand for these types of products in relation to the COVID pandemic. TF Automation worked effectively and quickly with the team at Intersurgical and were able to re-create the existing machine, which incidentally is still in use to support the demand. Intersurgical provide flexible patient solutions for airway management, anaesthesia, critical care and oxygen & aerosol therapy, for use within emergency care, hospitals and also in the home. They adopt an integrated approach to provide the highest standards in design, manufacture, quality and customer care allowing them to respond quickly and effectively to their customers. Tony Hubbert, MD at TF Automation, comments, “We were delighted to build a second laser marker for Intersurgical and also that our original machine is still working well! We are seeing an increase in projects incorporating laser marking for general part identification but also for more specific tracking and traceability requirements too.”


TF Automation build laser marker for medical devices


Supporting a wide range of manufacturing industries from automotive, aerospace and defence to medical, printing and packaging, we design and manufacture process automation solutions focusing on improving output and productivity.


• • • •

In-house design In-house manufacture Testing & commissioning Programming

C A PA B I L I T I E S • • • • • •

Assembly & Testing Process Automation Robotics & Product Handling Product Marking Manual Workstations Plasma Treatment










to discuss your next automation project, please get in touch with our design team

T: 01274 308005 E: Hillam Road, Bradford, West Yorkshire BD2 1QN

June 2021

Robot handles castor thousands Suscom Industries, one of the UK’s leading manufacturers of components for office furniture and equipment, has recently expanded its fleet of Kawasaki robots part of a successful reshoring programme Located in Wigan, Suscom’s recent addition of another Kawasaki RS20N robot takes the number of Kawasaki units in use at its plant to a total of 8. The company uses the brand exclusively. Seven of the units are Kawasaki’s RS20N with a single, larger, RS50N robot making up the

total. Each robot works 24 hours a day, 5 days a week as Suscom deals with demand. The robots are deployed during the moulding and post-moulding processes of many components and are engaged in a variety of tasks across the shop floor. One of these is

ENGINEERING UPDATE removing completed seat bases from a moulding machine and positioning them onto an adjacent workstation, using vacuum grippers. Another is removing the five-armed star shaped bases of office chairs from the moulding machine and holding them in place, almost upside down, with a three fingered gripper whilst a laser cutter profiles a section of the base to allow the fitting of the gas strut. In order to do this, the RS20N robot must describe a perfect 100mm diameter circular motion as the (fixed) head of the laser cutter sets about creating the required profile. Other tasks undertaken by the robots are varied and include upholstering the mesh onto freshly moulded chair backs and installing the 5 castors into position on the star shaped chair bases. Suscom Technical Director Matthew Kennedy says “Each of the many tasks we use robots for involves a combination of speed, agility and accurate, repeatable precision. In all the years we have operated our Kawasaki robots, we have never had a single problem, nor a moment of unscheduled stoppage time with them”. The company says that its decision to use Kawasaki robots exclusively is based on a proven track record of trouble-free service combined with ease of use by Suscom staff. Ian Hensman, Kawasaki Robotics UK Sales Manager observes “It is good to see Suscom’s success in a competitive market, and to be a part of it. The pandemic has underscored the value of the UK’s manufacturing base and reasserted its vital importance to all consumers. As the sole supplier of robots to Suscom we continue to work closely with them, matching robot technology precisely to their needs. The units at Suscom work a typical 120 hour week with no more than routine maintenance”. All Kawasaki robots in the range are currently available on favourable and flexible leasing terms. “For many SME’s, our leasing programmes open the door to productivity and profit without the penalty of purchase funding up front” concludes Ian Hensman.


KRUK half page page generic(2).pdf 1 22/02/2021 June 2021 ENGINEERING PDATE


Multi-skilled high performers.... Kawasaki robots deliver high-performance, reliably and consistantly, for the widest range of manufacturing applications. From high-speed precision assembly to taking the strain of handling ultra heavy products, there are Kawasaki robots world-wide helping businesses achieve their maximum potential.

Contact us now to discover more about practical and affordable leasing terms on all new Kawasaki robots. +44 (0)1925 713000

Kawasaki Robotics (UK) Ltd

> Corrosion resistant for up to 1000 hours in salt spray > Manufactured from a premium alloy with less than 0.1% copper content for corrosion resistance > IP tessng performed aaer impact tessng to verify the seal is maintained when the enclosure is treated roughly > Impact resistant up to 7 Joules > Reusable seals (Up to 200 compressions)


June 2021


NEW LEVEL SWITCHES FOR MAXIMUM EFFICIENCY Ask any operator in a food processing plant - some of the smallest parts of the process, like the sensors doing the ‘simplest’ detection and switching, can cause problems, overspills, feed supply run-outs or long hold-ups – especially when they can’t keep up with the demands of modern production and recipe variants.aa New VEGAPOINT 24 level switches master the sticky and viscous Many food products are developed with a distinctive texture in mind, whether they are "melt-in-your-mouth" like some chocolates, grainy like hummus, tough and chewy, super-sticky, satisfyingly crunchy or intensely super-soft and creamy. As a result of producing all these various textures and tastes, it in-turn increases the demands on the level measurement technology necessary for the consistent production of our favourite flavours and foods.

Light up your life VEGA has developed the new front-flush point level and interface switch VEGAPOINT 24, designed especially for use with challenging switching duties required on very sticky, viscous or abrasive products. Its focus is to provide the greatest possible robustness and reliability in the face of all these diverse ingredients. Even with the strongest build up, you can depend on its effectiveness at detecting the point level, it indicates the process status with a superbright 360° LED ring, that is easily visible from afar.

Out of the box thinking Thanks to this robustness, VEGAPOINT 24 is really quick to deploy, as a plug&-play sensor it can be installed very easily in just a few simple steps. Flexible production systems with frequent and fast product changes really benefit from the fact that it can detect all media utilising the ‘out of the box’ setting, without any adjustment. Users can also take advantage of its extra functions and capabilities with a simple to use, smart phone Appbased Bluetooth wireless connectivity, to access and configure settings like liquid/liquid interface detection or ignoring/detecting foam (VEGA TOOLS App free on iOS or Android). This is also where you can also customise LED colours and/or flashing combinations for process status notifications.

Figure 1 V0EGAPOINT 24 Flush hygienic point level switch suitable for all media out of the box

mixing, conveying and filling are all about efficiency and safety, even with demanding liquids and bulk solids like molasses or homogenised creams," explains Volker Allgaier, Product Manager at VEGA. The front-flush design of VEGAPOINT 24 especially ensures its universal application possibilities. "It means that it can even be installed and operate alongside pigging cleaning systems that can pass safely past its flat measuring tip,” Allgaier emphasises, "we made sure the measuring sensor face is more durable too, we tested this and it even copes with abrasive sandblasting.” This is because the ‘wetted’ measuring part in the process is mainly metal in its construction. “Compared to all-plastic measuring tips”, he concludes, “our extensive tests have shown the service life can be extended by a factor of 4.”

Fits like a glove Another decisive factor is flexibility of use through its versatile process fittings and adaptors. This is a level switch designed to fit in your existing process systems like a glove. This means users can achieve optimum visibility of their processes with the new VEGAPOINT 24 - the relationship between durability, low life-cycle costs, partnered with ease of use and ‘easy to see’ indication, makes it truly groundbreaking for reliable point-level switching. If you would like to test or try a device for yourself, or just get more information e-mail

Lasts 4 times longer "With this device, we are specifically targeting the food, beverage and also the pharmaceutical sectors. Here,


Figure 2 VEGAPOINT 24 Features a superbright 360 LED Users can select colours and flashing status to suit their process

More information available at

We bring colour into view! Compact capacitive level switches with 360° custom-colour status display

256 colours Individually selectable: Measurement in progress Sensor switching Process malfunction

15 cm

Compact design

Hygienic adapter system

Adjustment via smartphone

£263 VEGAPOINT 24 G½"


Absolut ely front-flu sh design

June 2021



ess space, more output is not surprisingly high on the ‘wish list’ for any forward thinking manufacturer and the ArcWorld standard systems available from YASKAWA are ideal for replacing, or supplementing manual welding required in metal manufacturing applications. These fully integrated systems offer the distinct advantage of being selfcontained, so it’s a bit like buying any machine tool, you choose the size of machine you need and a location to install it and away you go. The YASKAWA ArcWorld HS Micro and RS Mini systems are easy to install, operate and relocate in a small footprint of either 2.3 sq. metres for the Mini, or as little as 1.4 sq. metres for the Micro. Both systems offer the possibility for operators to double their output with up to half the preparation time, compared to manual welding. The Micro system is supplied complete with robot and controller and its hinged door opening provides lots of options even though it’s a very small, compact system. The Mini system has a revolving door and table, which again means maximum flexibility within a compact system. The systems are designed to allow quick changes of jigs, which is crucial in helping to reduce the all-important setup time and improving production output compared to conventional manual welding practices. Furthermore, improved operational consistency by never missing a weld and ensuring the same quality of weld at the end of the shift as at the start, also means reduced ‘spatter’ which improves the capacity for fettling. Both systems incorporate a MOTOMANAR900 robot with YRC1000 controller, a start / stop button panel and fume extraction hood. They also feature a platform and casing with dark green polycarbonate glare shield protection and CE-marking. The Yaskawa Motoman ArcWorld Micro and Mini robotic welding systems are pre-engineered, pre-assembled and shipped ready to weld and represent the latest generation of cost-effective automated solutions for welding applications. They can be configured with your choice of welding power source and are ready to mount your component tooling.

For more information click here.


ULTRA COMPACT, SELF CONTAINED ROBOT WELDING SYSTEMS Exploring the benefits of using robotic systems across a wider range of manufacturing applications has accelerated recently where investment in the most up-to-date systems is making a significant contribution to maximising efficiency. Welding applications are a good example and the availability of new, highly flexible, space-saving systems is helping manufacturers to integrate robotics into their welding and fabrication processes.


June 2021


June 2021


Circuit breakers from renowned brands Protective solutions by the best manufacturers


's extensive range of low voltage circuit breakers ensures that every customer will find the right protection for their electrical installation, whether in a small residential building, a public building or an industrial plant. Renowned manufacturers, such as Eaton Electric, Schneider Electric, ABB, or ETI offer several series of overcurrent switches, RCDs and RCBOs with their electrical and mechanical parameters adapted to the specific industry in order to most effectively protect people against electric shock and electrical equipment and installations against the effects of shortcircuits and overloads.

Protecting your home electrical installation In standard solutions for the protection of electrical installations in residential and infrastructure buildings, basic series with a short-circuit breaking capacity of 6kA, rated currents of 0.5 to 63A and B-, C-, D-type characteristics are usually sufficient. We particularly recommend to our customers the series of overcurrent circuit breakers, such as Eaton HN xPole Home, Schneider K60N i IC60N, ABB S200 and ETI ETIMAT6. When it comes to residual current devices (RCDs), the best choices would be Eaton HNC xPole Home, Schneider IDK, ABB FH200 and ETI EFI with differential current of 30mA, 100mA, 300mA (type AC and A) with rated current of 25A, 40A and 63A. A particularly remarkable and space-saving solution are RCBOs (combined) which combine the functions of an overcurrent circuit breaker and a residual current circuit


breaker in a single device. Eaton HNB xPole Home, Schneider iDPN Vigi, ABB DS200, ETI KZS series are some of the most popular and proven solutions.

Industrial protective solutions Industrial applications, where sinusoidal current waveforms as well as high rated and inrush currents may occur, require more advanced and surge-resistant installation protection. Solutions intended for industrial applications mainly include those series of products which have a minimum breaking capacity of 10 kA, a wider than standard selection of rated currents – even up to 125A, or differential currents – above 500mA, as well as characteristics that are adapted to specific types of load, e.g. the K-type characteristic intended for three-phase motors, where using standard overcurrent circuit breaker may result in unwanted operation due to high inrush currents, or the Z-type characteristic with increased sensitivity, intended for protection of electronics. For applications with higher requirements the most popular series include: Eaton FAZ, Schneider IC60H, ABB S200M and ETI ETIMAT10 in the case of overcurrent breakers, Eaton PFIM, Schneider iID, ABB F200 and the ETI EFI series. With regard to combined breakers we especially recommend Eaton PKNM and Schneider iDPN H Vigi. Also, don’t forget to discover the wide range of protective solutions by SIEMENS, HAGER and LEGRAND which are available directly from our warehouse.

June 2021


ALRAD Instruments Limited (established 1970) has been serving the Industrial, Automation, Scientific, Medical and Instrumentation markets for five decades and has a wealth of experience in all aspects of Automation Imaging, Machine Vision and Photonics. For the Automation Market we have an extensive range of both Area and Line Scan camera systems with a full range of interface options including: Gigabit Ethernet (10, 25, 50 and 100 GigE), Cameralink, CoaXPress and USB. The following are some of the products we are supplying for Automation applications:

The Code Reader uses a CMOS sensor to acquire image data and provides a high-quality image. Various trigger modes and image acquisition modes are supported, the unit includes both Software trigger/Hardware trigger/Free run modes and has a1Gbps Ethernet industrial interface with max 100m transmission.

In-Line Angular Spectral Measurements of Displays with the New CubeX-150 from ELDIM

iRAYPLE - 2K, 4K and 8K Line Scan Cameras for Automation Applications: iRAYPLE is the new brand name for HuaRay (A Dahua company) and ALRAD Instruments is pleased to distribute their comprehensive and competitive range of Line Scan Cameras. The Linescan 5000 Series includes 2K, 4K and 8K resolutions with image sensors from CMOSIS, with others under development and features GigE, CameraLink and CoaXPress interface options. The key features of the Linescan camera series include: Support for a wide range of power supplies:12V~24V DC, GigE Vision protocol and Gen<i>Cam standard, 256MB on-board frame buffer, Software trigger / External Hardware trigger / Free run mode, brightness enhancement, gamma correction, LUT, flat field correction, multiple image data format output, ROI and binning. The cameras are fully CE, FCC, UL and RoHS certified. Applications Include: Agriculture sorting, PCB inspection, Paper and Textile surface inspection, Rail track inspection and Postal sorting.

iRAYPLE - 7000 Series Code Readers The iRAYPLE 7000 Series Code Reader uses a built-in code reading algorithm and deep learning algorithm to read a variety of barcodes.


ELDIM’s multi-angle spectroradiometer CubeX-150 is ideally suited for both R&D teams and mass production lines due to its speed, accuracy and multiapplication use. The CubeX-150 is based on completely new technology patented by ELDIM. To understand this technology, imagine that you are moving a spectrometer around the DUT (Device Under Test) and taking a measurement every 2.5° in a viewing cone of +/-60°. The CubeX-150 provides emission data, including flicker information, at all these angles. The measurement takt time of the equipment is less than 2 seconds, and all of the acquired data can be transferred by ethernet cable or WIFI. This equipment operates in the visible wavelength range and is used to measure displays including LED, OLED, uLED and Micro Displays in a wide range of sectors including Automotive, Avionics, General displays, Military and Mobile phone applications. For more information on the above items and our range of Automation and Machine Vision products, please call the ALRAD Sales Team on +44 1635 30345, or visit we will be happy to help and advise on your requirements.


June 2021

‘Wired for Good’ as AWI celebrates 75 years in business with £1m investment A specialist producer of ‘High Performance’ nickel alloys is celebrating a big birthday in style by targeting international expansion and a £1m investment drive.

Alloy Wire International (AWI) is celebrating 75 years of manufacturing in 2021 and has plans in place to take sales past pre Covid-19 levels to £12m by the end of the year. The company, which employs 30 people at manufacturing sites in the West Midlands and Yorkshire, is also looking to mark the milestone year by launching ‘Wired for Good’, a campaign that will see it boost its work supporting local charities and, importantly, committing to becoming carbon neutral. This means all manufacturing, deliveries and even employee commuting emissions will need to be offset and the firm has partnered with a number of specialist organisations to achieve this, with the focus on woodland creation, solar/wind and sustainability projects. Mark Venables, Managing Director of AWI, commented: “75 years in business is a major achievement and the last twelve months have certainly been some of the most challenging yet, with our staff going above and beyond to support the global fightback against the pandemic. “Despite the challenges, sales have held up well and demand across 15 key market sectors have surged since January 2021 and this bodes well for our big anniversary year.”


He continued: “We’ve got some really big plans for our birthday celebrations, including a £1million investment in new wet drawing machines and increasing our stockholding to 220 tonnes, the latter meaning we are able to offer our unrivalled two-week industry lead times.

in the business, a decision made by existing Chairman Bill Graham and the current Senior Management Team.

“We also wanted to do something different that makes a positive social difference. With sustainability on many people’s agenda, we felt the time was right to become ‘carbon neutral’, a significant commitment when you consider we produce wire and export to over 65 countries.

“2021 is going to be an important time for the business, with R&D activities helping to find new applications for our material,” explained Tom Mander, who was recently named as MD Designate as part of a number of key appointments to the Senior Management Team.

“’Wired for Good’ will govern all of our 75th activities and we’re looking forward to announcing more positive projects in the coming weeks.”

“One example is the rise in demand for our wire being used in Wire Arc Additive Manufacturing (WAAM), which is also referred to as 3D Metal Printing. WAAM works by melting the wire using an electric arc as the heat source and, unlike the 3D printing powder process, can be used to produce larger components in large quantities.”

Alloy Wire International, which manufactures round, flat and profile wire for more than 5000 customers, was founded in 1946 by John Stockdale in an old ambulance station in Old Hill in the Black Country. The company’s founding principles of ‘manufacturing quality, delivering reliability’ has stood the test of time and still remains a crucial part of how it deals with its global client base, spanning automotive, aerospace, medical, nuclear and oil and gas. Today, the firm is employee-owned with most of the staff owning shares

This inclusive culture has been crucial in helping AWI more than double turnover from £5m to £11m in the last thirteen years.

He concluded: “We have discovered so many new applications for our material over the last seven decades and, by ensuring we have the largest production capacity in our 75-year history, we are in a perfect position to find even more going forward.” For further information, please visit or follow Alloy Wire International on LinkedIn


Valve World Series New Technologies

June 2021


MONITORING VALVE HEALTH THROUGH IIOT By Imtex Controls As the industry begins to explore the potential benefits of embracing plant level digitisation, the opportunity to significantly increase efficiency through effective condition monitoring of equipment is clear. With thousands of valves used on any plant being one of the primary causes for unscheduled production downtime, huge potential savings can be realised through effective performance monitoring.


ost plants already have one form of valve condition monitoring device installed, namely the smart valve positioner on control valves. However, few utilise or even realise the diagnostic capabilities of these instruments. Even where plants have tried to use positioners for condition monitoring, operational and knowledge limitations have only afforded minimal benefits. Where automation and instrumentation requirements are relatively low, as is the case with on/off valves that do not require the control functionality of a valve positioner, it can be difficult to justify the time and money involved with installing a smart positioner to provide condition monitoring information. In addition, fitting a smart positioner to an automated on/off valve introduces additional operational issues such as compromised stroking times and increased potential failure modes.

Unfulfilled potential A number of companies have tried to develop bespoke systems for on/off valve applications but they can present the end user with other operational, financial and/or functional implementation issues. They are generally more costly than traditional feedback systems, can require installation of


new wiring and hardware and can have software integration issues. Operationally, these solutions will typically require site personnel to ‘harvest’ data and trained personnel to perform data review. These tasks will often be overlooked or performed un-systematically, resulting in the potential benefits of the system used to not be fully realised. Imagine instead a cost-effective system that enables ‘real time’ reports identifying which valves need attention, to be delivered directly to your inbox or smartphone.

CNS for automated on/ off valves: a wishlist When asked what a CMS (condition monitoring solution) for an automated on/off valve should look like, most plant operators have common desires. First, the system should be simple to install. This should apply to both new installations and, importantly, for retrofit applications as there are vast swathes of valves already installed that would benefit from condition monitoring Also, the system should have no impact on plant control. Any condition monitoring system should not have the potential to compromise safe plant control or operation, preferably working in parallel with DCS/PCS operations.

Furthermore, the system should not require additional wiring. Installing new wiring infrastructure is very complicated and expensive and would make the case for fitting a system, especially in retrofits, difficult to justify. The system should not require additional software within the Process Control Environment. Similar to wiring, introducing additional software into the process control environment can be difficult. Not only can software integration be challenging and expensive, but there is also the potential for security issues to arise which could have disastrous effects.

Clear business case To continue the wishlist, the system should be fully automated. Plant operations teams are busy people, and tasking them with additional work, such as collecting data from valves, is not desirable. As such, any condition monitoring system should be capable of harvesting data automatically and sending it for analysis without the requirement for plant personnel to be involved. Finally, the system should be an extremely cost-effective solution. In an ever more competitive economic environment, pressures on capital budgets are high. Therefore, any condition monitoring solution must be able to demonstrate a clear business case. This means


June 2021

Valve World Series New Technologies infrastructure to the valve. The datalogging and transmittal within the VFMD is done in parallel with the Plant Control System so that plant operations run exactly as they did previously.

Pro-active interventions

keeping the additional pressure on capital project budgets to the absolute minimum whilst providing the operational cost benefits that condition monitoring offers.

VDMS Imtex Controls, a valve automation and communication company based in the UK, has recently introduced a valve condition monitoring solution targeted at the on/off valve market that addresses the implementation and operational demands that end users have. The technology, called Valvescan Diagnostic and Monitoring System (VDMS), has been designed to

provide clear condition data for automated on/off valves without tasking the plant level operations team with any additional work plan requirements or creating any potential to compromise plant safety. The two core elements of VDMS are the Valvescan Field Mounted Device (VFMD) and the ValveHealth Diagnostic Application. The VFMD is mounted on the automated valve in the same way as a traditional limit switchbox. The field mounted device gathers data from every valve operation and transmits this data via a cellular network to the cloud. The VFMD is purely a datalogger – it does not have control capability – and is powered using existing wiring

ValveHealth is a cloud-based application that receives data from the VFMD via the cellular network and analyses it automatically. The results of this analysis can be made available to authorised users in a web portal or shared with a wider plant condition monitoring platform as desired. Alerts can also be configured and pushed out to the people that need to know, whether that be key plant personnel or contracted valve service providers. VDMS can be deployed in both green- and brown field applications with minimal additional infrastructure requirements. By comparing current performance signatures with historic ‘as new’ data, the system provides an assessment of the current health of the automated valve assembly with the goal of predicting a ‘time to failure’ value for the valve. Maintenance and pro-active interventions can then be scheduled in advance of any issues. Please contact us for more information: 08700 340 002


June 2021


he maintenance of the batteries in a 12, 24 or 48V DC system is dependent on the quality and technical capabilities of the power back up system, usually consisting of a DC UPS or a battery charger. The Adel System CBI series of DC UPS and the CB series of battery charger are intelligent microprocessor based DC power management unit. Utilising the CBI or CB series with the MR220 Decoupling Module will allow the system to have an added level of protection against power outage or indeed a component failure in the components supporting the DC network.


load to the second DC UPS or Battery Charger to provide the power, monitoring and protection. The MR220 decoupling unit can also be used with the FLEX series of power supplies to provide a dual redundancy installation with a load sharing or load back up feature. If the load requirements do not exceed the capacity of a single Flex Power Supply, then when one unit fails the load will be transferred to the remaining unit via the MR220.

When two CBI series DC UPS or CB battery chargers are connected in dual redundancy installation utilising a MR220 redundancy module, in the event of a failure the MR220 will still support the DC network by switching the

Using the Adel Flex series in a dual redundancy installation can allow a greater overload tolerance on the systems. The Flex series has variants which can allow up to 150% of the rated output current for 3 minutes. This allows for the use of a lower rated power supplies to cope with short term larger loads.

CBI series DC UPS Installation

Flex Series Power Supply Redundancy Installation

DC Power Security in a redundancy installation When an installation is fitted with a battery backup, it is essential that the DC network is at optimal readiness as much as possible. TVR Instruments Ltd provide a range of DC UPS, Battery Chargers and Power supplies for such an application.

Group Shot Adel Series of products

TVR Instruments Limited 143 Butt Road Colchester CO3 3DP



Tel +44 (0) 1206 575755

June 2021


Upturn in Demand for High Performance Mini Turbine Flowmeters Titan Enterprises, a leading manufacturer and supplier of affordable, precision liquid flow measurement devices for a wide range of applications, reports an upturn in sales within its low flow mini turbine flowmeter range.

Small turbine flow meters are adaptable liquid flow devices that Titan has successfully employed in batching processes and dispensing applications particularly within the food and beverage, chemical and laboratory sectors. Turbine flow meters offer the high level of repeatability and dependability required for accurate batch delivery systems. Titan Enterprises maintains certification under NSF169 for their 800 Series turbine flowmeters and beverage dispensing flowmeters, as ‘equipment for food and drinks products’. Bruce Midgley, Director and Founder of Brentingby Gin, commented “With a new distillery, a number of pubs and mobile bar vehicles going into operation, our question was how to accurately monitor and check the


flow of gin being dispensed through our bar taps and within the distillery process. Titan’s 800 series flowmeter was the perfect choice for our gin flow monitoring trials.” Incorporating only non-metallic wetted components and delivering reliable, high performance over 6 flow ranges, from 0.05 to 15 L/min, these flowmeters are ideally suited for Brentingby Gin’s application where both food hygiene and precision flow measurement are required. Samantha Hannay, Marketing Manager for Titan Enterprises, said “As the hospitality sector bounces back from the impact of the COVID-19 pandemic we have seen demand for our mini turbines, particularly our NSFcertified beverage and 800-series flowmeters, grow significantly. With nearly half of our beverage flow

indicator sales within this sector and sales back to pre-pandemic levels, we are optimistic about the rest of 2021”. The bearings within the Titan mini turbine flow sensors are made of sapphire for long life and reliability. The body is moulded from inert PVDF to ensure there is no contamination to any liquid passing through it. Based upon a unique Pelton wheel design, Titan’s 800-series and beverage dispensing flow meters are inherently reliable and proven in tens of thousands of installations around the world. For further information on Titan’s full range of turbine flowmeters please visit or contact Titan Enterprises on +44 1935 812790 or


June 2021

DS-OCT12-BLACKFAST_Layout 1 20/09/2012 16:28 Page 1

Safety Guarding •

Complies with the EU Machinery Directive 2006/42/EC

Clamping profiles allow different materials to be installed

Minimal effort required in construction

Smooth easy to clean outer surfaces

Comprehensive range of accessories

Quick assembly time

Profile Technology Linear Technology

Connecting Technology

01296 611 660

Tel: 0208 339 7370

Modular Technology

Fax: 0208 339 7371 Unit 5 Russell House, Molesey Road Email: Walton-on-Thames, Surrey KT12 3PE



Experts in metal & plastic engineered fasteners • Extensive stocks available for rapid delivery! • Vast range of proven solutions to choose from • First class technical support & customer service • Bespoke design, development & manufacturing

Find your solution at • 01623 551 800


June 2021


New pressure instrument release from Kobold Kobold have released the latest version of their electronic digital pressure gauge; model MAN-SC for battery powered, and model MAN-LC for 24Vdc power with IO-link.


utwardly, the two versions are similar in appearance and share most of the screen functionality features which are now accessed via capacitive Touchpads, however, depending on the application and use, each instrument version may be defined differently. For example, the battery powered instrument defined as a Digital Pressure Gauge, while the 24Vdc version can be defined as a Digital Pressure Transmitter, which considering the innovative features of each version is rather simplistic, but it goes some way to define the natural application areas of the two versions.

Kobold’s previous Digital Pressure Gauge, the MANSD, remained in production for 23 years, proving a very robust and popular instrument. With that record of robustness and reliability in mind, Kobold carefully developed the new MAN-SC/LC instruments, prioritising these core values, but also incorporating the wishes of customers worldwide to produce a high-quality digital pressure gauge which satisfies traditional user applications, but also reaches out to new industry sectors. A key target requirement in Kobold’s design brief was not to exceed the retail price of the previous model, which for a new innovative electronic instrument product manufactured in Germany was not an easy task for Kobold’s production engineers, however, the retail price remains the same, and we think this offers considerable value for money in the current global marketplace. So what’s new?


The new alpha-numeric 14-segment reflective LC‑display screen is impressive, with a full 5-digit display, and digit height of 16mm.

The electronic screen module can now be rotated in 90ᵒ increments; ideal for side mounted or inverted installations.

The gauge head position can now be radially adjusted after installation for perfect positioning.

Access to the screen options is now by capacitive Touchpads.

An impressive range of measuring units are now accessible for selection from the programming menu, for example; kPa, MPa, bar, mbar, psi, kN, N, torr, inWC, mmWC, inHg, USR (user-defined measuring unit), providing more options than any comparative instrument so far.

Peak memory is featured, as is password protection, and reset to factory setting.


June 2021

Battery life with 9V Lithium is now increased to 22,500 hours (2.5 years).

A zero (tare) function is now more easily accessible from within the menu, ideal for calibration.

By popular request, a rubber protective case cover is now available as an option, ideal for test engineers and vulnerable areas of installation.

Measuring ranges are now available from -1… 0...+1600 Bar, which is impressive.

The range of process connection threads has also been substantially increased and now include metric threads. Additionally, from the options list Kobold are able to assemble diaphragm and hygienic process connections.

Another unique application feature, only available from Kobold, is calculation of Force Value which is included in the programming menu. This is calculated from the measured pressure value and a programmable reference area. There are many industrial applications that will benifit from this feature but the most common request came from the construction test and safety sector for a digital pressure gauge to be included as part of the test equipment for compliance to DIN EN 1090, for example, testing of anchors and fastenings in masonry and concrete to provide conformity assessments and certification in accordance with DIN EN 1090. So why produce a digital pressure gauge with an integral transmitter? The MAN-LC provides so much more than the traditional barrel style digital pressure transmitter such as Kobold’s popular PSD instrument, which followed the industry design trend for compact digital instruments. The most beneficial features of the MANLC are the clarity of the large digital display, and the multiple programmable features of the instrument. So what’s new? •

The new MAN-LC model comes with IO-Link, the only Digital Pressure Gauge worldwide with IOLink. Many of the standard features included in the battery powered MAN-SC model are typical, however, the MAN-LC is 24Vdc powered and therefore further features are included, most noticeable when viewing the LC-display, is a backlit screen which combined with the new large display characters provides a clarity which traditional digital barrel transmitters cannot provide.

Analogue and frequency, plus alarm outputs are standard, and an optional pluggable relay module with 2x potential-free SPDT contacts is available either factory assembled, or as a retrofit kit. This enables a customer to specify a very powerful pressure instrument specification.

Added to these features, the addition of a variety of flanged and diaphragm seal process connections extends the application reach to many industrial applications.

Kobold believe they have answered the most requested technical wishes from their customers worldwide, and in doing so, have produced a class leading digital pressure gauge/transmitter, in line with future Industry 4.0 requirements. Kobold has International sales offices and distributors who will be happy to offer support. For the product datasheet and national contact details: -


June 2021


Error Free Retrieval of SMD Reels Rhode and Schwarz an electronics group working across 70+ countries needed to improve their setup processes for populating electronic assembly groups for Surface Mounted Devices (SMDs) with an average of 200 setup processes per hour. The focus was on the availability of the SMD reels to ensure that the changeover went smoothly on populating lines with buffering times avoided during production. To ensure flexibility in the production process they installed automated vertical carousels that were able to ensure fast, simple, and error-free automatic storage and retrieval of the SMD reels for production. This allowed the company maximum flexibility in the production process, which is necessary for the wide range of products and changing batch sizes during production. The vertical carousels allow them to quickly react to changing market needs without any downtime. A total of twelve automated vertical carousels were installed to help organise SMD reel logistics and ensure the smooth set up and removal of the assembly groups during the production process. Two or three employees work on the units at the same time and put the


SMD reels into storage i.e. retrieved and returned them after use. As an added benefit, the process was completely paperless because of the pick-by-voice system. Each operator works at their own pace through individual items of an order. The total fill level of the automated vertical carousels is 90-95%, which is achieved by the flexible way that storage space is allocated depending on space availability. This high-density storage method made it possible to supply four production lines with 10,000 reels per day and populate around 441 million components per year. The automated carousels also connect their warehouse management system software to the company's inventory management of SMD reels in real time to maintain a permanent inventory without stopping production. The advantages were clear for Rhode and Schwarz with a simple, clearly structured picking process and their throughput increased by more than 50% with same number of employees. With 100% error-free retrieval of SMD reels for setup and removal process, storage space fill level at 90-95% storage density and permanent, real-time inventory they achieved their goal.

Based on the paternoster principle the Kardex Megamat RS is an automated vertical carousel that provides quick and precise access to stored goods and is especially suitable for frequently accessed goods, because it conveys the right carrier to the access opening via the shortest possible path. The design of the Megamat RS offers maximum storage space on a minimal footprint. This facilitates efficiently designed work processes and also significantly raises productivity. Read the case study or if you want to learn more about the MegaMat Vertical carousel go to our website or contact us locally at

The new Interroll Split-Tray Sorter Fast, flexible sortation for everyone Interroll introduces the new Split-Tray Sorter: the perfect solution for small and mid-sized items. Efficiency and low maintenance make this new sorter attractive for those looking for lower operating costs and quicker return on investment. It is an ideal solution for the 3PL , E-Commerce, Fashion and CEP industries. Easy to install and reliable with its proven mechanical components & integrated control solution Lightweight and energy-efficient - with a single motor every 40 meters Compact but dense footprint with plenty of destinations Extremely quiet with only <70 dB(A) noise levels

Interroll Limited Unit 1a Orion Way Kettering, Northants NN15 6NL Tel. +44 / 15 36 31 27 70 Email:

June 2021


Leaders in Scotland’s electrical contracting solutions In the recent issue of Industry Update, Q Electrical Industrial Services Limited has been selected as their Electrical Solutions Company of the Month. You can read the full article below. “We officially started in February 2021 after a new partnership was formed through Quantum Controls acquiring Lothian and Borders Electrical, which has produced 43% year on year growth to date.” Lyall Colvin, Managing Director. Known formerly as Lothian and Borders Electrical Ltd, Q Electrical Industrial Services Limited boasts over 40 years of experience in the electrical industry and through its merger with Quantum Controls, benefits from its over 25 years’ experience as the UK’s leading supplier of variable speed drives, electric motors and support services. Streamlining its services, Q Electrical Industrial Services Limited is one of Scotland’s leading NICEIC (National Inspection Council for Electrical Installation) accredited, electrical contractors. The company offers a wide range of electrical services for all electrical installation projects including industrial panels and domestic distribution boards, bespoke control panels, installation services, electronic repairs, maintenance services, PLC programming, harmonic survey, EV Charging Installations, inspection and testing, emergency call-out services, power factor correction and much more. “We offer electrical installation industrial services and we are environmentally and safety focused.” Lyall continued, “We are a onestop-shop solution. We can assist our customers through any stage of a project electrically. From start to finish, design and manufacture of control panels, installation and commissioning, software and programming – we provide a fully comprehensive service.” A notable service the company provides, Q Electrical Industrial Services Limited is offering Harmonic


surveys. Since the 17th June 2020, the new implementation of the Engineering Recommendation G5/5 came into effect setting the limits to be valid at the Point of Common Coupling (PCC). Through Q Electrical Industrial Services Limited Harmonic Survey service, the company carries out checks for compliance with these standards and utility regulations to ensure its customer’s sites are fully compliant and not at risk of receiving fines for noncompliance. Not only necessary for ensuring compliance, but this service is also vital for preventing harmonic issues which can cause deterioration and damaging of equipment, equipment failure and underperforming energy efficiency. By using Q Electrical Industrial Services Limited’s Harmonic survey service, the company provides customers with a detailed assessment of their sites compliance and overall performance. Through the company’s in-house team of expert engineers, Q Electrical Industrial Services Limited analyse the data and carry out a further report summary with recommendations. Best of all, the report provides a no-obligation quote and a discussion with one of its engineers on what recommendations can be carried out on site.

initially, but since then we have been busier than ever and have managed to grow from it. We’ve created 9 new jobs in the first 3 months of trading and we continue to recruit Electrical Engineers in Scotland.”

In terms of recent developments, due to the COVID-19 pandemic, many industries have faced challenges and a slowing or halt of services/ production. Able to not only establish itself through its merger but to have grown its business, Q Electrical Industrial Services Limited has been able to continue providing its services and has seen an influx of new business.

Indeed, the company has been showcasing its wealth of expertise through its services, proving to be a successful merger of the two leading companies. In regards to the company’s plans, Lyall told us that, “We want to continue to be the go-to people in Scotland for that turnkey service in electrical installations.”

“We have been busier than ever as we have been providing services in key industries.” Lyall continued, “Unfortunately, we did have to furlough half the staff for six weeks

T 01875 816 302

For any more information, pleases see the details below.

Q ELECTRICAL INDUSTRIAL SERVICES Scotland’s leading electrical contractors with over 40 years experience in the electrical industry and engineering.

NICEIC Approved and Accredited contractor 24/7 team of fully qualified Electrical Engineers 2x Winner of Electrical Industrical Contractor in Scotland Part of QCH Group with premises and engineers UK wide

Our Services 24/7 Emergency Breakdown

Installation & Commissioning



Inspection & Testing Services

Control Panel Manufacturing

PLC & HMI Programming

Harmonic Surveys

EV Charging Installtions

Power Factor Correction

Be a Motor Expert in just 60 minutes with our FREE Guide Simply email us at 01875 816 302


0330 9001 247

June 2021


Optical Modules -

Design & Development Service Optical module and system design and development requires extensive knowledge at both the component and system levels. For any optical module or system development the initial step is to assess the customers application. Drawing upon over 25 years experience Resolve Optics is able to offer an expert service for designing, developing and manufacturing integrated optical modules and systems that perfectly match your application. Mark Pontin, Managing Director of Resolve Optics commented "For an optical module or system project it is important to determine whether you require an imaging or non-imaging design because the performance requirements for each are very different. Optical imaging systems are designed to transfer an image of an object to a detector, such as a camera, sensor or your eye. By comparison, non-imaging optical systems are typically designed to collect, disperse, resize, focus, or collimate light. Following this, the next step is to determine the primary optical parameters of your optical module or system. At this point, we


are ready to start designing an optimised optical module or system for your application. Our optical design and engineering teams have many years experience of creating and producing optimised optical modules and systems designed to meet your specific requirement”. For nearly 30 years, Resolve Optics has successfully developed a growing number of innovative, high performance optical modules and optomechanical systems for industrial partners that require small or high volumes of these custom 'products' or anywhere in between. For further information please visit please click here or contact Resolve Optics on +44-1494777100 / to discuss the possibility of developing a high performance optical module or system for you.


Systems Engineering by Murrelektronik

Save 30 % with Systems Engineering – Let’s GO! The digital transformation is not waiting for you! That‘s why you need to act now to meet the growing competitive and financial pressures. Murrelektronik has efficient solutions for the electrical installations in machines and systems. Redefine power, signal and data transfer and save up to 30 % with Murrelektronik’s decentralized installation technology.

Are you ready for the future?

June 2021


THERMOPLASTIC VS. THERMOSET David Barnes, Protolabs EMEA’s Injection Moulding Product Manager, explains why thermoplastic and thermoset materials in injection moulding perform differently from each other, with some useful tips on their uses.


wo broad categories of plastic materials exist: thermoplastics and thermosets, which are differentiated based on their behaviours in the presence of heat. So perhaps an interesting way to explain the difference between thermoplastic and thermosetting polymers is to consider a cheese omelette! We start with a few eggs, some cheese and a hot pan. The eggs begins as a liquid which, when dropped in the pan, become solid. The cheese, however, begins as a solid, but when heated becomes a viscous liquid. After heating the eggs you can cool them or reheat them but they will never return to their liquid state. They remain solid, just as thermoset polymers do. But if you cool the melted cheese it regains its solid form. Reheat it and it flows again, just like thermoplastics.

Using thermoplastics Keep in mind that even a well-designed part can fail if manufactured from the wrong material. Accordingly, carefully consider factors such as strength, impact resistance, performance at high temperatures, and other elements when selecting thermoplastic materials for injection moulding. In addition, make sure to review properties of common resin types, such as Acetal, Acrylic, high-density Polyethylene, polycarbonate (PC), polypropylene (PP), and polystyrene. Consider that if a standard material doesn’t provide everything you need on its own, you may be able to find a blended resin that meets your needs. After all, the material is your part. For example, when polycarbonate and ABS are combined, the new material is stronger and is capable of forming a part more accurately than ABS alone.


Using thermosets Thermosetting polymers include a variety of liquid silicone rubber (LSR) materials. LSR is a common thermoset and is a useful material because of its superior flexibility and heat and chemical resistance. Typical applications include softtouch surfaces, gaskets, and heat insulation. Moulders mix two components of uncured LSR to form a relatively low viscosity ‘liquid rubber’ solution. The material cures in the presence of heat forming a bond that can’t be undone. When working with LSR materials you’ll find a whole set of unique design and material challenges. To meet those challenges, make sure you consider wall and rib thickness, shrink and flash, parting lines, undercuts and part ejection. Ejector pins are not normally used during LSR moulding so parts should be designed so they can be retained on one half of the mould when it’s opened at the end of the moulding cycle. Thermosets do also have their liabilities. In harder forms, thermosetting plastics are not as impact resistant as thermoplastics and can tend to shatter. Finally, every type of material has rules and guidelines so it’s worth exploring all the detail to make sure you choose what’s right for your project. Material decisions are for the designer to make but there is a wealth of information out there to support you in this.


June 2021

Fluid Carrying



Flexibility Articulated Torsion Pipework In Hoses Rotating Cylinders

Swivel Joints Swivel joints allow pipework to pressure 1/4” to 40” and beyond.

Resurfacing of badly worn floors and new build installations

Vacuum to over 20,000psi.

Impact, abrasion and point load resistance

Stock and bespoke production.

Anti-static, anti-bacterial, slip resistant, chemical resistant & suitable for heavy traffic plus high bay category one and two

Unique bearing/seal design for longer life. ISO 9001 CE marked where applicable.

Fast installation for minimum downtime Integrate corporate colour schemes, colour matching and corporate logos into the same hardwearing and durable flooring For a complete Nationwide service from FREE survey and recommendations, to preparation and installation with single source, uncomplicated warranties…

Call 01952

740400 or visit us online.

RESPOL - innovative flooring solutions GUARANTEED! Tel:

Bingswood Trading Estate Whaley Bridge | High Peak | SK23 7LY | UK

+44(0)1663 735003



Accredited Contractor

Petrochemical Products

Fluid transfer products for upstream, downstream and refining • Hoses and hose assemblies • Hose & pipe fittings • No-spill couplings • Safety breakaway fittings • Blow-Out prevention couplings • Global inventory and locations • Sales and technical support • In-house engineering & design • Pressure Equipment Directive • ISO 9001 accredited

• Hydraulic Fracturing: Low Pressure Systems • Loading arms • Liquid level sensing • Zero emission valves

+44 (0)1772 323529 |


June 2021



The world-class manufacturer continues to innovate and expand its range of 3D printing solutions for the industrial workbench to help businesses across the globe to innovate.

With the filament PA, some mechanical properties improve by 20% with the use of the Smart Cabinet.


toring 3D printing filaments has never been so easy, thanks to the new Smart Cabinet from BCN3D – a world leading developer and manufacturer of integrated 3D desktop solutions. A revolutionary new solution that has been developed to preserve filament printability, extend its shelf life, reduce aesthetic defects and avoid costly reprints, the BCN3D Smart Cabinet maintains a constant dry environment around stored spools of filament to protect them from sudden external changes. Bringing a step-change in 3D printing, the Smart Cabinet overcomes the common problem of filament degradation due to humidity, whilst its uninterruptable power supply protects work and minimises the risk of losing a print job because of power outages – all in one easy to use, portable unit. With a growing number of manufacturers and engineers across many sectors now using 3D printing to make parts or create prototypes, this groundbreaking new development will help them save time and money and enhance the quality of the finished product. The first machine of its kind to combine a drying unit and a workbench to conveniently store the printer, the Smart Cabinet is a unique alternative to other drying methods that can often damage and degrade 3D printing filaments, such as PA, TPU, PVA, PLA, BVOH, PET-G and ABS. It safeguards the filaments by keeping them fully enclosed and at an optimum level of humidity to greatly reduce the chances of print failure due to excessive water content. With PA, for instance, some mechanical


properties improve by 20% with the use of the Smart Cabinet. Intelligent, reliable and versatile, the BCN3D Smart Cabinet uses smart drying technology to ensure that filaments are consistently kept at optimal humidity levels, guaranteeing the best results in every print job and protecting against print failure and nozzle clogging. With the new product introductions, in addition to recent investment in the business, BCN3D unlocks a new era in its growth and demonstrates its commitment to providing an innovative and expansive product portfolio, cementing its position as a major player in 3D printing. The BCN3D Smart Cabinet works on the absorption dryer method, alternating between drying cycles and regeneration cycles to maintain a constant dry environment around the stored spools and protect them from sudden external changes. It controls relative humidity inside the air-tight container through a desiccant - in this case, alumina-based pellets – which are open to the dehumidifying environment. By isolating the absorption material from the heating chamber and increasing its temperature, the absorbed humidity is released outside of the chamber and the material is regenerated. After the purge, the desiccant has been refreshed and is ready to collect more moisture. The air-tight container and cyclical internal ventilation through the fan, heat, and valves, means there is no user interaction required. This process effectively keeps the filament dry and in optimal condition

for its use and means that there is never a need to change the desiccant. Eric Pallarés, chief technical officer at BCN3D, says: "To achieve fine, repeatable parts, we need to control the whole printing process, so materials need to be in optimal condition. All materials are sensitive to humidity to a certain degree, but some of them, such as PA, TPU, or BVOH, are particularly affected. For example, in just a few hours on a humid day, a spool of PA can uptake an amount of water that will affect the finished print. “When customers waste time and money on failed or defective PA print jobs, it’s not down to the printer or the profiles, it’s because of the degradation of the materials. So, to really unlock the potential of additive manufacturing, with technical materials beyond PLA, we needed a solution just like the Smart Cabinet. “Furthermore, an increase in 3D printer usage means that printing times also extend. In industrial or lab contexts, where power outages or micro-cuts are common, the Smart Cabinet can help to reduce waste and improve efficiency." The Smart Cabinet is compatible with the Epsilon W50, the Epsilon W27 and the Sigma D25 3D printers. Developed to boost efficiency and minimise the impact of downtime, the Smart Cabinet has an Uninterruptable Power Supply (UPS) to protect against power outages that could ruin hours of printing and cost money. The Smart Cabinet is available in the UK through BCN3D’s UK distributor – 3DGBIRE from today. For more information, please visit

June 2021


The new PMD laser line-scan profilers from ifm electronic offer a convenient, cost-effective and easy-to-use solution to the challenge of inline inspection of components and assemblies to detect manufacturing faults. Much more reliable than manual inspection - yet capable of detecting even small and subtle faults - PMD profilers are a fraction of the price of conventional vision systems and can be configured in minutes using just three integrated pushbuttons – no software is required.

ifm delivers quality control without the cost and complications


he profilers work by scanning a line across a good sample of the object to be inspected and, using laser time-of-flight technology, storing a profile for this line. Subsequent objects are scanned in the same way and the results are compared with the stored version. If the deviation is greater than a userdefinable limit, the profiler’s good/bad output changes state. The evaluation of the profile covers a specific ‘region of interest’ which again is user definable.

interest and stores a single profile, while the OPD101 supports two regions of interest and stores up to ten profiles. Both versions offer standard switching outputs together with an IO-Link interface. The use of IO-Link in conjunction with the optional ifm Vision Assistant software package provides additional options, including the capture and display of scanned profiles.

Key benefits of this method of operation are that results are unaffected by ambient light levels or by changing distance, over a wide range, between the profiler and the object being inspected. In addition, small faults, such as incorrectly tightening fixings, missing seals and defective or missing machining steps, can easily be detected. The profilers are also invaluable aids for applications such as product sorting and orientation. Currently, ifm’s PMD profilers are offered in two versions. The OPD100 version allows users to set one region of



June 2021

Schaeffler and Siemens to cooperate on intelligent diagnostics for drive systems •

Together with Siemens Large Drives Applications, Schaeffler is advancing the digitisation of industry with a focus on customer benefits

Digital service for automated bearing diagnostics from Schaeffler is now integrated into Siemens’ IIoT platform Sidrive IQ

Bearing condition’s analysis results as part of overall motor health status support informed operation and maintenance decisions to reduce unplanned downtime.


lectric motors drive our core industrial processes, and the rolling bearing is their central mechanical component. The bearings experience all of the loads and stresses that occur in the electric motor. Therefore, bearing diagnostics provide a crucial indicator of the overall condition and reliability of a motor. In addition to developing a portfolio of condition monitoring solutions for operators, the automotive and industrial supplier Schaeffler is also working with OEM customers such as Siemens on joint offerings to increase the availability of machinery and equipment. “This partnership between Schaeffler and Siemens is based on a solid foundation of product knowledge and specific expertise. Both companies are playing an instrumental role in driving digitalisation forward in the industry while keeping their entire focus on customer value,” adds Dr. Stefan Spindler, CEO Industrial of Schaeffler AG.

Services seamlessly integrated in one platform The collaboration between Siemens and Schaeffler combines Sidrive IQ – the digital platform for drive systems and solutions from Siemens – with Schaeffler’s decades of experience and expertise in designing, manufacturing, and servicing bearings. Sidrive IQ integrates a number of functionalities into one seamless solution and augments drive systems with AI-based analytics and digital content. For the customer,

The collaboration between Siemens and Schaeffler combines Siemens’ IIoT platform Sidrive IQ with Schaeffler’s decades of experience and expertise in designing, manufacturing, and servicing bearings. (Picture: Siemens)

this means the ability to make better decisions when it comes to operation, maintenance, and maintenance measures for drive systems.

New dimensions of collaboration in the industrial IoT The integration of Schaeffler’s analysis service for automated bearing diagnostics in Sidrive IQ makes it possible to determine the bearing condition with greater certainty and precision. “This cooperation and automated exchange of algorithmbased diagnostic data is one of the first of its kind in the industrial IoT. It’s a great example of a new dimension

of cooperation among established technology companies,” says Hermann Kleinod, CEO of Siemens Large Drives Applications. With the help of well-founded insights and specific information, operators can quickly determine whether the drive system can continue to operate or whether, in the event of impending damage, the bearing needs to be replaced immediately or can wait for the next maintenance interval. This reduces maintenance effort and cost, and most importantly, unplanned and costly downtimes can be prevented.


June 2021


RMGroup’s partnership with ASTI Mobile Robotics extends capabilities Robotics and automation specialists, RMGroup, has announced a distributor partnership with ASTI Mobile Robotics, Europe’s leading manufacturer of Automated Guided Vehicles (AGVs). The move will see RMGroup include AGVs and autonomous mobile robots (AMRs) in their extensive product portfolio of packaging machinery and robotic automation solutions. ASTI Mobile Robotics Group, with offices in Spain, Germany, France and United States, provides automated intralogistics solutions for large manufacturers, helping them to optimise productivity, streamlining production processes and cutting operational costs. The company specialises in the engineering of Automatic Guided Vehicles (AGVs), serving global bluechip customers across a wide range of sectors, including: automotive, aerospace, food, e-commerce, pharmaceutical and cosmetics. As part of their commitment to excellence and continuous improvement of their products and services, ASTI Mobile Robotics


invests heavily in research and development year after year. Having recently become the first integrator in the UK to be accredited under the RIA/BARA Robot Integrators’ Certification Scheme, the RMGroup supplies and manufactures a wide range of manual and automated packaging systems, including manual bagging machines, weighing systems, robot palletising systems, bulk filling and material handling systems, as well as supplying high speed form fill and seal packaging lines. Operating in the food & beverage, horticultural, aggregates, chemicals and agricultural industries, the company’s partnership with ASTI Mobile Robotics will provide a complementary offering. Commenting on the partnership, RMGroup’s Rosie Davies, said: “Becoming a partner of ASTI

Mobile Robotics provides a natural extension of our automation capabilities, meaning that we can now offer a seamless, integrated solution for all product and pallet handling requirements. Together we have a shared desire to remain the leaders in innovation within our respective fields, which will in turn provide a unique and unrivalled platform to support our customers.” “We have key synergies with the RMGroup, who share similar core values. We very much look forward to developing our relationship in the future and creating opportunities to add value,” added Borja González López, ASTI’s partner network manager. For more information on RMGroup and ASTI Mobile Robotics partnership visit LINK


June 2021

and absolutely cleanroom-compatible production and precision. Additionally, full documentation and traceability in the manufacturing process is available. With the broad spectrum of medical moulding in Ireland, in addition to all the other sectors, we anticipate that this versatile machine will be an extremely useful addition to the training centre. It is also hoped that First Polymer Training Skillnet will also be able to take advantage of the online training and webinars offered by ENGEL to all their customers.” Alan Harrington, technical training specialist at First Polymer Training Skillnet says “The ENGEL machine has many key features which are new or unique to First polymer training. ENGEL‘s iQ weight control software which automatically detects viscosity fluctuations and compensates for them in the same shot, resulting in less rejects and consistent quality of moulded parts, and thus higher productivity is one. We also have the auto-protect injection monitoring self-learning system with highly Plastics processing, including Injection moulding, sensitive protection of the mould during injection and iQ clamp control is an important sector of manufacturing which allows the operator to monitor industry for the island of Ireland. the mould breathing signal and to optimise the clamping force. Our machine is additionally equipped with ith the demand for plastics components, an ENGEL VIPER 12 RC300 integrated robot with its Smart particularly in the medical sector, set to software to achieve the shortest cycle time and maximum grow in the future, companies are giving efficiency.” significant thought to their ability to access With ENGEL injection moulding machines leading the a sufficiently well-trained workforce moving forward. way in single source solutions, from standard single First Polymer Training Skillnet deliver current, best practice component injection moulding to technically sophisticated training which meets the demands of employers and applications, such as medical and pharmaceutical employees in the plastics industry. Maintaining strong components, it is clear that the opportunity to train on links with employers FPT Skillnet are able to preserve their one of these machines is a valuable experience. Alan position as the industry-recognised, leading provider of Harrington offers more insight accredited training in plastics. “Ireland has a very buoyant and busy injection moulding Nigel Baker of ENGEL UK is eager to support the industry which is growing each year. The sector boasts future of the Irish plastics sector. He explains, “ENGEL a highly technical workforce and training has played a UK have provided an energy efficient, next generation huge part in supporting the industry. Demand for injection e-mac injection moulding cell to the training centre. moulding training has been very strong, even considering This all-electric injection moulding machine combines the absence of face to face training and we have been flexibility with a minimum footprint and offers absolute successfully delivering injection moulding training on-line. cleanliness, together with perfect repeatability which Although challenging, this has been very well received and ensures consistent high quality of the parts produced. we have put a lot of work into trying to mimic a face to face ENGEL provide a great number of machines to processors course as much as possible. We believe this will allow us working in the medical sector. We have a reputation for to deliver blended training in the future if required. We are supplying machines that meet the specific requirements looking forward to hosting a virtual opening of our newly of the sensitive medical industry. We offer utmost safety refurbished and extended centre, in the early summer.”

Injection Moulding Training in Ireland Moves Ahead With ENGEL



June 2021


RS Components trebles its SKF bearings offering to 6,000 products with further range expansion planned

FDA-compliant Blue bearings for the food industry and spherical roller bearing for heavy-duty industries R S Co m p o n e n t s ( R S ) , a trading brand of Electrocomponents plc (LSE: ECM), a global omni-channel solutions partner for industrial customers and suppliers, has added 4,000 SKF bearings to its portfolio, increasing the offering to a total of 6,000. This is the first step in RS significantly increasing its SKF range offer across bearings, power transmission and seals over the next 12 months. SKF’s Blue range of food bearings follow innovative hygienic design principles and are relubrication-free. Compared to conventional designs, which can harbour co nt aminant s such as airborne droplets, wastewater, or contaminated grease, SKF’s food bearings feature curved surfaces with a smooth finish. The ball bearings are easy to wash down, reducing the risk of bacteria build-up. Furthermore, these relubrication-free bearings are maintenance-free, which increases production uptime and product lifetime, and eliminates re-greasing material and maintenance costs. 70|

The SKF spherical roller bearings range includes CC, CA and E design bearings, sealed bearings, and bearings designed specifically for high vibration, high speed, and wind energy applications. All designs are self-aligning, feature rugged windowor prong-type cages, and accommodate high radial and axial loads in both directions. The symmetrical rollers selfadjust, providing optimal load distribution along the roller length, and the unique profile prevents stress peaks at the roller ends. Self-guiding rollers keep friction and frictional heat at low levels. A floating guide ring guides unloaded rollers so that they enter the load zone in the optimal position. The full range of SKF bearings includes many customised solu tio n p ro du ct s , and continued innovation in product performance and applications knowledge. This combination ensures that customers are well set to achieve the ongoing TCO savings that support manufacturers in their productivity and output challenges.

“ Expanding our ranges of mechanical components is a major focus for RS, which will enable our customers to select the devices they need to continue to develop and innovate new equipment,” said Liam Kettlewell, Senior Director, Product & Supplier Management UK & Ireland, SKF. “Expanding SKF’s bearings and power transmission products and seals within the RS offer is another key step in our continued efforts to remain our customers’ industrial distributor of choice.” S K F ’s b e a r i n g s , p o w e r transmission products and seals are shipping now from RS in the EMEA region.


Dosch 3D: Factory Accessories

Dosch 3D: People Clean Room Vol. 1

Dosch 3D: Environments - Factory

Dosch 3D: People Factory Worker Vol. 2

Dosch 3D: Car Details V3

Dosch 3D: Industrial Objects V3

Dosch 3D: Liquid Effects Vol.2

Dosch 3D: Accident Cars

Dosch 3D: Trade Show & Exhibition V2

Dosch 3D: Food

Dosch 3D: Shipping Packaging

Dosch 3D: Medical Supplies

3D-Design, Animation, Visualization Besides complete 3D-models and scenes >Dosch 3D, DOSCH DESIGN products contain surface materials >Dosch Textures, High Dynamic Range Images >Dosch HDRI, as well as 2-dimensional objects for visualizations >Dosch Viz-Images.


June 2021


Rugged Nicomatic EMM Series rectangular connectors resist high vibration and shock to enable miniaturization in harshest-environment applications Meets or exceeds MIL 83513-G and MIL-DTL 55302G; resists fluid immersion, salt spray; temperatures to +150C; multiple different configurations EMM Series connectors from Nicomatic, the leading manufacturer of high performance interconnect systems, meet or exceed the performance requirements of MIL 83513-G and MIL-DTL 55302G to reduce space and weight in the most extreme environments, including defence, space, motorsport, civil aviation, UAVs and robotics. The 1.27mm pitch EMM interconnects effect a 40% space reduction over their parent CMM Series and a 20% space saving when compared to standard Micro D connectors. A recent customer application was a sophisticated missile actuation system; others include the TUM Hyperloop pod motherboard. On a 1.27mm pitch in 04 to 60 pin configurations, the EMM Series is highly modular, suited to both board


to board (thanks to their secure wiping length) and board to wire (from gauge 24 to gauge 30) configurations, with male and female thru-hole and SMT straight and 90° variants as well as cabled versions available. 90° EMM Series interconnects feature ingenious integrated back protection, with the contacts protected by a proprietary design. Hardware is interchangeable, with locking and guiding functions available on both male and female connectors to ensure no misalignment or mis-mating can occur.

and beryllium copper inner. Fixing hardware is passivated 300-series stainless steel. EMM interconnects can be mated and unmated up to 500 times.

Manufactured in Nicomatic’s purposebuilt facility in France, EMM Series connectors have high-performance glass fibre composite moulding, copper alloy male pins and female pins featuring tulip technology – a clip with a 4-finger spring contact made with the outer in copper alloy

For extreme environments, the EMM Series is qualified to withstand vibration, shock, extreme temperature cycling, fluid immersion, humidity and salt spray corrosion. For space applications, they are certified to meet the ASTM E595 (ECSS-Q-ST-70-02C) specification for thermal vacuum outgassing.

Electrical performance is outstanding: rated voltage is 250V RMS at sea level, dielectric withstanding voltage 750V RMS. At high altitude, where the EMM Series is often specified, diaelectric withstanding voltage is 540V RMS at 30,000 feet and 465V RMS at over 100,000 feet.

Hygienic furniture & equipment

our mission:

quality products great value incredible service


Computer consoles – Diamond bracing with 4 adjustable feet – Keyboard drawer & fold-out mouse tray – Vents for air to escape – Seals around doors to prevent water ingress


THAT’S FORWARD THINKING! For more information get in touch today W: T: 01603 788 833

June 2021


Do you need support accessing specialist parts? At TFC, we are seeing more and more manufacturing customers request help sourcing specialist parts — components that are custom produced using processes such as CNC machining or cold and hot forging. 2021 is a great opportunity to get UK manufacturing back to its best. We want to do our bit by giving customers every opportunity to access the components they need, including specialist ones. Sometimes a standard “off the shelf” cold formed fastener just isn’t suitable for a specific application and this can be for a multitude of reasons. For example, the part’s sizing, material, finish or technical specifications may be inappropriate for its intended use. But, with our expertise and experience, we can help customers find the solution.

accessing specialist parts, we can draw from our global network of quality assured manufacturing partners. As a result of our strong relationships, we can compare and contrast what is available, enabling us to offer customers competitively priced solutions and a lead time that works for you. Making manufacturing easier

When sourcing specialist parts, the first port of call is often the local machine shop because it is close and convenient. However, this may limit opportunities to drive down costs or shorten lead times, so it may help you to collaborate with a specialist during the sourcing process, ensuring you can always access the parts you need, when you need them.

By incorporating specialist parts into a TFC vendor managed inventory (VMI) service, we can take the pain of managing these potentially problematic and longer lead time parts whilst the customer enjoys all the benefits of a managed system, such as reduced stock holding, improved cash flow, total quality management (TQM) and a streamlined process. Alternatively, TFC can stock in bulk at one of our local distribution centres, ready to be called on schedule as required.

TFC, for example, has over 60 years of experience sourcing components. When a customer needs help

The outcome of reduced time spent sourcing parts, negotiating prices, making payments, managing the


supply chain and stocking shelves enables a complete focus on what you do best — manufacturing. Ensuring quality Every product TFC supplies goes through a rigorous quality assurance process in adherence to ISO9001:2015 and as required Aerospace AS9100/9120 accreditations. Utilising our in-house facilities, we have the equipment and skills to check even the most complicated product. Need certification? Not a problem, we can offer PPAP, FAIR, ISIRS and more.

2021 is a year of opportunity. To support you, TFC is here to help source, manage and supply the parts you need. Whether they are off the shelf or bespoke specialist components, TFC is here to help bring it together. Looking to improve the way you source specialist parts? If so, call us on 01435 866011 or send us an enquiry at


June 2021

Training and professional tools extend bearing service life A

manufacturer of polystyrene-based insulating products was experiencing frequent failures in the bearings of conveyors which link its machines. However, relatively easy control of the situation arrived following a hands-on NSK training course for maintenance personnel and the adoption of the correct bearing mounting tools. To what extent does the correct mounting of bearings have an influence on their service life? In practice, this factor is often underestimated. The case of an insulation product manufacturer demonstrates that it makes sound economic sense to approach this maintenance task with the utmost professionalism. Alongside other materials, the company processes large quantities of expanded polystyrene, with 3D parts milled from sheet material. The manufacturer transports the material by conveyor systems, with heavy exposure to abrasion and fine dust from the polystyrene. As a result, repeated failures were occurring in the rolling bearings of the conveyors. Although the primary reason for the failures was the dusty and dirty operating environment, another cause was that maintenance personnel did not have proper training on how to handle the bearings and were using conventional, non-dedicated tools to perform the work. Realising the need for correct training, the company asked NSK to deliver a practical course for its maintenance team. In a concise training session, maintenance technicians received instructions on how to mount and dismount bearings correctly and use professional mounting and dismounting tools.

Maintenance personnel are now aware, for example, that extreme cleanliness is essential in order to prevent contamination when mounting the bearings. Also, whenever bearing replacement takes place, there is a clear need to use dedicated NSK tools. The tools carefully apply the necessary forces so as to avoid any damage, never transmitting them across the rolling elements. NSK´s tool set includes bearing extractors that are able to exert a strong pulling force without damaging adjacent components. To subsequently install the replacement bearing, tools are available that support efficient and damage-free cold mounting. For the manufacturer of insulating products, these tools are entirely adequate, since the bearings are relatively small and easily accessible, ultimately making it possible to dispense with hydraulic tools or induction heating devices. Thanks to these measures, the company is enjoying lower labour costs as the time required for dismounting and mounting failed bearings has reduced by a factor of 5.5. Furthermore, the service life of the newly installed bearings is significantly longer as there is no mechanical damage during cold mounting. Only a small investment was necessary for the training, while the NSK mounting tool paid for itself within a few weeks.

ABOVE: Professional bearing extractors should be standard equipment in every maintenance department



June 2021


T&D Corporation Mr Minoru Ito, European Sales Office, Gronauer Straße 1, 61194 Niddatal, Germany 0049 (0)6034 930970

Unit 3A, Whitworth Court, Manor Park, Runcorn WA7 1WA. Tel.: (0044)-330 002 0640,

Curtiss-Wright Surface Technologies

TR Fastenings LTD

European Corporate Office, Hambridge Lane, Newbury, Berkshire, RG14 5TU 01635 279621

Trifast House, Bellbrook Park, Uckfield, East Sussex, TN22 1QW Free phone: 08454 811 800 E-mail:

Phoenix Mecano Ltd

Blackfast Chemicals Ltd

26 Faraday Road, Aylesbury, Buckinghamshire, HP19 8RY +44 (0)1296 611660

Unit 5 Russell House , Molesey Road, Walton-onThames, Surrey, KT12 3PE 0207 339 7370,


Ecopac (UK) Power Ltd

Monitran Ltd, Monitor House, 33 Hazlemere Road, Penn, HP10 8AD, UK T: +44 (0)1494 816569 E:



Unit 4, Ridgeway, Crendon Industrial Area, Long Crendon, Bucks, HP18 9BF Tel: +44 1844204420



June 2021

Foremost Electronics Ltd

Seepex UK Ltd.

14 Bluegate Business Park Great Bardfield, Essex CM7 4PZ TEL: +44 (0) 1371 811171 FAX: +44 (0) 1371 810933 WEB:

3 Armtech Row Houndstone Business Park Yeovil, Somerset, BA22 8RW

HRS Heat Exchangers 0-12 Caxton Way, Watford Business Park, Watford, Hertfordshire, WD18 8JY Email: Tel: +44 (0)1923 232 335

T +44 1935 472376

Mecmesin Ltd Newton House, Spring Copse Business Park, Slinfold, West Sussex, RH13 0SZ w: t: +44 (0) 1403 799979 e:

1 Brownfields Court Welwyn Garden City Hertfordshire, AL7 1AJ

BÜLTE GmbH Kunststofferzeugnisse Carl-Sonnenschein-Straße 22 D-59348 Lüdinghausen – Germany Phone: (+49) 02591 / 91 94 – 0

Wood Automated Systems UK (ATG – Systems) Tenter Road, Moulton Park Industrial Estate Northampton, NN3 6AX +44 (0)7827 327231

Lascar Electronics Ltd UK Module House Whiteparish, Wiltshire SP5 2SJ +44 (0)1794 884 567

Rotech Machines Limited


Power Security & Back-Up

Instruments Ltd


CBI Series Input 90-305 V AC Output 12/24/48 V DC upto 20 A MODbus / CANbus Comms Remote Monitoring via ethernet Status Relay

Battery Chargers CB Series Input 90-305 V AC Output 12/24/48 V DC upto 20 A MODbus / CANbus Comms Remote Monitoring via ethernet Status Relay

Power Supplies

FLEX Series Input 90-500 V AC Output 12/24/48 V DC upto 25 A Single / Dual or 3 Phase inputs


h r A

Multifunction Meters | CTs, VTs and Shunts | Transducers | Energy Meters - MID Bargraphs | Earth Leakage Relays | Protection Relays | Battery Chargers | Power Supplies DC UPS | Generator Controllers | Remote Monitoring | Ventilation Control


Instruments Ltd

TVR Instruments Limited 143 Butt Road, Colchester CO3 3DP Essex United Kingdom

Tel: +44 (0) 1206 575755 Email:


Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.