Page 1

Supply Catalogue 5th Edition

www.jennisfabrics.com


Introduction

Table of Contents

Table of Contents Introduction................................................................................................................................................................................ 2 Adhesives................ Aerosols, Bulk, Glue Stick............................................................................................................................ 24 Aerosols.................. Vinyl Sprays, Protectants, Stains, Silicones................................................................................................... 38 Bag Hardware......... Buckles, D-rings, Hooks, Slides, Pads, Loops............................................................................................... 50 Bases....................... Office Chair, Rocker, Van............................................................................................................................ 76 Binding................... Acrylic, Para, Sunbrella®, Vinyl, Felt, Twill Tape........................................................................................... 82 Buttons................... Cutters, Dies, Molds.................................................................................................................................... 91 Cleaners.................. Protectants, Iosso®, Marine Window, Spot Lifter, Vinyl & Leather, Stamoid................................................ 102 Cords...................... Awning cord, Draw String, Rope, Shock Cords, Twine................................................................................ 114 Elastics.................... Knit, Pre-shrunk, Woven............................................................................................................................. 122 Fasteners................. Common Sense, Rivets, Screws, Snaps, Lift-the-Dot, Tarp Clips, StayPut.................................................... 124 Fittings.................... Aluminum, Chrome, Nylon, Stainless Steel, Tent, Plastic Window, Tubing.................................................. 154 Foam....................... Closed Cell, Curon, Duron, Rebond, Regular, Supersoft, Ultra Cell, Qualux...............................................197 Frames.................... Dowel Pins, Connecters............................................................................................................................... 216 Grommets............... Cruiser, Cutters, Dies, Osborne, Self Piercing, Tools.................................................................................... 217 Legs........................ Ball & Claw, Metal, Plastic, Queen Anne, Round, Castors, Glides,T-Nuts................................................... 226 Linings.................... Deckings, Enbond, Quilted Decking, Skirt Lining, Typar............................................................................ 239 Needles................... Curved, Straight, Tufting Needles, Clips, Regulators.................................................................................... 242 Paddings................. Terylene, Thinsulate™, Felt, Coirtex, Comforter Inserts, Pillows................................................................... 246 Pattern Making....... Cardboard, Panel Boards, Chalk, Pins, Rulers.............................................................................................. 257 Shears...................... Mundial, Wiss, Quick Clip, Sharpeners....................................................................................................... 261 Springs.................... Coil, Clips, Mechanisms, Rockers, Spring Units.......................................................................................... 267 Staples..................... Haubold, Senco, Duofast, Pullers, Stainless Steel......................................................................................... 284 Tacks....................... Tacking Strips, Curve Ease, Nails, Upholstery Tacks.................................................................................... 289 Tapes....................... Reflective, Sealing, Transfer.......................................................................................................................... 298 Thread..................... Koban, Marine, Nylon, Spun Poly, Polycotton, Hand, Monofil, Star Ultra, Tenara...................................... 310 Tie Downs.............. Webbings, Hooks, Ratchets......................................................................................................................... 327 Tools....................... Cutters, Fastener/Grommet Setting, Tackers, Automotive, Upholstery......................................................... 332 Trimmings.............. Edging, Gimps, Welting Cord, Wireon, Snap On, Moldings....................................................................... 380 Velcro...................... Regular Hook and Loop, Pressure Sensitive, Velcro®..................................................................................... 390 Webbing................. Cotton, Furniture, Nylon, Poly, Tarp, Jute................................................................................................... 399 Zippers.................... Aluminum, Brass, Coil Chain, Delrin, YKK, Premade, Sliders..................................................................... 408 Color Index.................................................................................................................................................................................. 431 Index............................................................................................................................................................................................ 439

Visit www.jennisfabrics.com

1


Introduction

About the Company

About J. Ennis Fabrics A market leader for over 35 years, J. Ennis Fabrics is committed to giving you the best experience. Our products and services are distributed throughout North America from four extensive, full-service distribution warehouses in Toronto, Edmonton, Vancouver and Indianapolis. Our showrooms showcase all of our latest products. Your next visit to one of our showrooms will be an unforgettable experience, as we offer the utmost customer service and an extensive library of fabric and supplies. You will be amazed by our exclusive textiles that hail from all over the world. J. Ennis Fabrics offers an always increasing line of high quality products that will suit your every need. We review our line on a continual basis to ensure we have the newest trends and hottest looks. Our products meet the highest standards for quality and are used in many diverse environments. Our Customer Service Centre agents and Sales Professionals are specially trained and knowledgeable on all our products. They look forward to answering your inquiries on stock, pricing, delivery, product specifications and more! With our Bilingual Customer Service Centre, our agents are able to take your calls in English and French. J. Ennis Fabrics has everything for all your home decor, contract and specialty needs. Because of our diverse product offering, J. Ennis Fabrics has everything you will need in one location. J. Ennis Fabrics is proud to supply our markets with everything you will need: Home Decor: • Fabrics

Specialty: Recreation: • Nylon

• Supplies

• Polyester

• Foam

• Supplies

• Finished product

• Trims

• Boat Covers

• Blinds

• Flooring

Contract:

• Fabrics

• Plastic

• Supplies

• Supplies

Marine:

• Upholstery

Transportation: • Upholstery

• Flooring

• Supplies

Industrial: • Awning

• Truck tarp

• Canvas

• Sign and Banner

• Supplies

J. Ennis Fabrics is a wholesale distributor and does not engage in retail sales. Wholesale customers are of course welcome to send their retail customers to our showrooms to aid in the selection of products, however, we would like to ask whenever possible that we be notified if a retail customer is coming in to ensure that we have someone available to assist them.

2

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


Introduction

Contact

Contact Canada Toll Free English

1-800-66-ENNIS

Franรงais

1-888-66-ENNIS

Canada Toll Free Fax: 1-888-274-2910 USA USA Toll Free:

1-877-95-ENNIS

USA Toll Free Fax: 1-888-274-2910 Email: orders@jennisfabrics.com

www.jennisfabrics.com For fax orders, a Customer Service Centre agent will confirm receipt and placement of your order.

Locations Head Office Distribution Centre & Showroom 12122 68 Street Edmonton, Alberta, T5B 1R1 Canada Toronto Distribution Centre & Showroom 6300 Kenway Drive Mississauga, Ontario, L5T 2N3 Canada Vancouver Distribution Centre & Showroom 13911 Bridgeport Road Richmond, British Columbia, V6V 1J6 Canada Indianapolis Distribution Centre & Showroom Building 95 Park 100 5111 West 76 Street Indianapolis, Indiana 46268 USA

Visit www.jennisfabrics.com

3


Introduction

About the Company

About J. Ennis Fabrics Prior to establishing J. Ennis Fabrics, James C. Ennis spent 22 years with LaFrance Textiles. In 1958, he was transferred to Edmonton as their Western Canadian Regional Manager. During that time he learned all about textiles and the needs of his customers. On June 1, 1972, James and Lois opened their original warehouse, a 2500 square foot bay, in Edmonton and distributed upholstery fabrics and supplies in Northern Alberta. Since that time, thanks to the continued support of our valued customers, J. Ennis Fabrics has experienced steady growth. Highlights: 1976 - Expanded the Edmonton warehouse to three bays. Product line grew to include auto trim, marine and industrial fabrics and supplies. 1981 - J. Ennis Fabrics moved into a 20,000 square foot company owned warehouse in Edmonton, on the Yellowhead Trail. 1983 - The area of distribution grew to include Manitoba, Ontario and parts of Quebec. 1986 - Our first Eastern Canada distribution centre opened on Maingate Drive in Mississauga. 1990 - Moved Edmonton offices and showroom to present location at 12122 68 Street. 1993 - The Vancouver distribution centre and showroom opened and Annacis Island. The Toronto distribution centre moved to larger premises on McAdam Road, Mississauga. More space was needed to support the growth in Ontario, Quebec and the Atlantic provinces. We became a national company. 1996 - Expanded the Edmonton office and distribution centre to 76,000 square feet. Once again, we were back under one roof in Edmonton 1997 - Toronto distribution centre and showroom move to a new 41,000 square foot facility on Meyerside Drive in Mississauga. 2000 - On June 1, 28 years to the day after the opening of our original warehouse, a new company, J. Ennis Fabrics USA Inc. was started. The Indianapolis distribution centre and showroom opened. The Toronto distribution centre and showroom moved to its present location, a 66,000 square foot building on Kenway Drive in Mississauga 2003 - The Vancouver distribution centre and showroom moved to its present location, a larger, more central facility in Richmond. 2010 - Stronger than ever, we continue to provide the best experience through our Edmonton, Toronto, Vancouver and Indianapolis distribution centres and showrooms supplying Home Décor, Contract and Specialty markets. From 1972 to present day, J. Ennis Fabrics remains committed to providing an efficient, cost effective source for textiles and sewing supplies to the wide variety of industries that we service. “Dedication and hard work build strong, value-added, customer service relationships.”

4

- James C. Ennis 1929 - 2001

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


Introduction

Mission & Values

Mission Each day, we strive to surpass the expectations of our customers and employees. We achieve this by being passionate about ways to contribute to our customers’ success - being their partner, understanding their needs, being exceptionally reliable, and delivering the right products when needed.

Values Being part of a winning team ...fostering leadership at all levels, celebrating successes achieved through hard work and creating a vibrant, fun and disciplined environment. Our people know where they stand and thrive on being counted upon and counting on each other. Honorability ...being worthy of our partners and our J. Ennis Fabrics team’s trust, keeping our promises and always seeking to do the right thing. Focus and Agility ...being proactive, keen and ready to take advantage of new opportunities and ways of doing things. Learning and adapting quickly to the markets as they change. Rich Communication ...with our partners, and within our team, we communicate in a spirit of openness. Listening carefully, always striving to be accurate, measuring and sharing results, and communicating in such a way that’s organized, meaningful and relevant to our audience. Our Reputation ...built over years of listening, adapting, caring and hard work. We honor our history and value our future by always being recognized as a company which sets new standards and lives by our word, such that partners trust and invite us to opportunities.

Visit www.jennisfabrics.com

5


Introduction

How To Use

How to use this Catalogue You will notice that there is a bar at the top of each page that is similar to the one below; this will list the category of the items under this heading.

ADH

Adhesives

BU

Bulk

Code for Category

Code for Sub-category

Description for Sub-category

Description of Category

These category codes are the same ones we use in our internal system. For ordering, the 4 or 5 digit part number is all that is required. Each product has its own ordering information box. This box lists the part number, unit of measure, description and price break groupings for each part. Price Breaks: Determines how many of these units are the minimum level at which a volume discount will apply. This relates precisely to the breaks on your price list. Part number

Unit of Measure

Product Name

Description

1234 • Price Breaks: Each / 12 • Unit of measure: 13.12 oz./375 g aerosol can • Description

TO SCALE

Dangerous Goods

These symbols indicate the items featured in our catalogue which fall under the Transportation of Dangerous Goods Act. While this does not prohibit the shipping of these items, there are charges attached to them by the carrier to cover administrative expenses and the special handling requirements of the act (Dangerous Goods Handling Fee).

Scale

This symbol appears along the side to indicate that images are shown to scale.

TO SCALE

Location Certain items within our catalogue are marked as only being available in certain areas. For the purpose of determining your area, the following list is provided: Toronto Warehouse: Ontario, Quebec, Maritimes, and Manitoba. Edmonton Warehouse: Manitoba, Saskatchewan, Alberta and interior BC. Vancouver Warehouse: lower mainland BC. Indianapolis Warehouse: Midwest & Great Lakes region. Restrictions apply to limited group of products. If you have questions about which warehouse serves your location, call our Customer Service Centre.

6

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


Introduction

Brands

Brands We carry all the top brands:

GEMINI PRODUCTS

Sunbrella is a registered trademark of Glen Raven, Inc.

Visit www.jennisfabrics.com

7


Introduction

Eco-friendly

Eco-friendly At J. Ennis Fabrics we are doing our part to reduce our environmental footprint and are always looking to do more. We offer an ever increasing line of eco-friendly products. Our eco-friendly lines keep growing and include for contract: Crypton Green I and II, Brisa/Brisa Distressed, Ultraleather™, Novelties Exotic, Novelties Hides, Palermo, Performance Plus, and Everlasting, and for home décor: Silk, Exquisite Silk, Simply Natural and Genuine. Also look for our eco-friendly foam: Renew™. Renew™ is produced with the Natural Foam Technology™ process, ensuring the consistency and quality you have come to expect only from Carpenter Co. It’s bio-based, allowing you to leave a smaller environmental footprint, while reducing our nation’s dependency on foreign oil. Renew™ is fully recyclable, is PBDE free, and is made without the use of CFC’s. See page 198 for more information about Renew™ eco-friendly foam. Eco-friendly fabrics: Recycled Post Consumer and Post Industrial Yarns: Fabrics that contain all or partial yarns from recycled content. Polyurethane (PU) vinyls: Polyvinyl chloride (PVC) needs heat stabilizer and plasticizer to make the product soft. Plasticizers are typically a volatile compound that comes off over time. PVC is a polymerized resin, where some monomers can still stay, which is not healthy. PVC emits dioxin when burned. Polyurethane does not need any plasticizer/stabilizer and does not emit any toxic gas when burned. PU products are water based vinyls and therefore contain no volatile compounds. Bamboo: An ideal sustainable source of raw material due to its quick growth as it is able to reach maturity in about four years, compared to the typical 25 to 70 years for commercial tree species. Bamboo does not require replanting because of an elaborate root system that continually sprouts new shoots. Naturally antibacterial, bamboo is able to thrive without the use of fertilizer or pesticides. Light and strong, extremely soft, and biodegradeable, it retains its’ antibacterial properties even as a fabric. Bamboo can also absorb dye faster than cotton or viscose meaning less water used during dying. Organic Cotton: Grown using methods and materials that have a low impact on the environment. Organic cotton eliminates the use of harmful fertilizers, pesticides and chemicals in the growing stages. Production of organic cotton continues after leaving the farm ensuring the production, processing, distributing and selling remain organic. Traditional cotton farms contribute to environmental depletion of the land, therefore by choosing organic cotton, environmentally friendly land practises are supported. Linen: Made from the fibres of the flax plant. Highly absorbent and cool to the touch, linen is 2-3 times stronger than cotton. Hemp: Extremely durable and mildew resistant. Silk: A natural protein fibre that is soft without being slippery like many synthetic fibres. In effort to reduce our environmental impact this catalogue has been printed on FSC certified paper. FSC is an independent, nongovernmental, not for profit organization established to promote the responsible management of the world’s forests. Products carrying the FSC label are independently certified to assure consumers that they come from forests that are managed to meet the social, economic and ecological needs of present and future generations. Visit www.fsc.org for more information. This version of the supply catalogue has also been made available electronically to help limit the quantities of hardcopies that are needed to be produced. Visit our website, www.jennisfabrics.com, for more information about our Eco-Friendly fabrics and supplies. Look for Eco-friendly products with the Green leaf icon.

8

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


Introduction

Website

Visit our Website Finding the right product has never been easier.

www.jennisfabrics.com • • • • • • • •

Search by color Place orders Check stock levels Drape fabric on furniture Monthly features Market trends Specials Newsletters

See all the info you need online. Register to get a user name and password to access your account.

Explore a spectrum of colors with our search by color feature.

Let your creative side run wild by customizing furniture with our draping feature. Giving you the ability to see it before you build and purchase. Sign up today with the User Request form on page 10 to start exploring our website!

New

Complimentary Fabrics Specs

Green Drape

Email

Save to Portfolio Add to Order

Request Sample Collections

Colors

Add to Portfolio

Visit www.jennisfabrics.com

Discontinued

Limited Stock

Print

9


Introduction

User Request Form

User Request Form Company Name

Customer Account Number

For IT Department Use Only:

User name

Date

Password

Inquiry Type

User Information Name

Job Title

Email Address

Phone Number

Provide Access to Shipping Information

Yes

No

Provide Access to Product Pricing Yes

View Shipping Information

Provide Access to Credit Information

Yes

No

No

View Pricing Provide Access to Product Information Yes

View Credit Information

View Product Information

View Account Balance and Aging

View Product Images

View Invoice Archive

View Sample Presentations

View Statement Archive

View Supplies Catalogue

View Fabric on Furniture

No

Customer Authorization

J. Ennis Fabrics Authorization

Name

Name

Title

Title

Date

Date

Authorized Signature

Authorized Signature

By signing this request you fully take responsibility for any activities carried out by anyone using this account and agree that the user will abide by the policies in our Privacy Policy and Terms and Conditions policy as posted on our website. We reserve the right to remove access to our website from any users without notice. To submit via email, please request the electronic version of this form from credit@jennisfabrics.com. Please fax to 780-471-4994.

10

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


Introduction

Quality Control

Quality Control Standards and Guidelines J. Ennis Fabrics maintains the highest standards possible in the textiles and supplies we present to our customers. Our inventory is controlled with a piece based system allowing for the highest quality control. We sell both cuts and rolls with the ability to match dye lots. The following are the standards we use for shipping to our customers. These standards are based on the “Woven Upholstery Fabric Standards and Guidelines (2nd Edition)” and the Chemical Fabrics and Film Association’s paper on Standard Test Methods for Chemical Coated Fabrics and Films which are sources subscribed to by most North American manufacturers. These books specify test methods, practices and minimum voluntary acceptance guidelines for various types of upholstery fabrics and standards for vinyls and coated fabrics. In no case would we supply items as first quality that could not meet these guidelines. Clearouts or seconds are of a lower standard and are priced accordingly. Quality Control Allowances:

The following allowances will be made for fabric flaws:

Flaw Size

Allowance

Less than ¹⁄₈ yard

¹⁄₈ yard

More than ¹⁄₈ yard

Length of flaw plus ¹⁄₈ yard

Two flaws (measured as 1 long flaw) Length of flaw plus ¹⁄₈ yard

Marking of Flaws: Factory flaws are marked with either a red or yellow plastic “swiftach” type of marker or a length of colored thread or string in the selvage of material. When marked with a red tag, the flaw is considered a “spot” or filling (course) direction flaw. It usually will be less than ¹⁄₈ yard and is marked with a red tag for identification and numbering of flaws per roll. When a yellow flag is used, this represents a warp or weft direction flaw, and there is a flag to mark both the start and end of the flaw. In most cases a flaw of this type would not be included in your shipment, but in case of a full roll order, the exact yardage between flags is deducted from the gross yardage on the roll. Flaw Density: This refers to the acceptable number of flaws in a given cut. A maximum of one flaw per 5 yards is allowed. If the cut is equal to or less than 5 yards, then the cut must be free from flaws.

Maximum Flaws for firsts:

Pile Fabrics

1 flaw per 5 yards up to a maximum of 10 flaws per 50 yard roll

Woven Fabrics

1 flaw per 7 yards up to a maximum of 7 flaws per 50 yard roll

Vinyls and Industrial Fabrics

2 flaws per 39 yards, 3 flaws per 49 yards, 4 flaws per 59 yards

Breaks in Rolls: A break in a roll is considered to be a flaw and the allowance given is usually ¼ to ½ yard. All orders 10 yards or less must be filled with a single piece of fabric. If this is not possible then the customer must approve shipment ahead of time. If the length of the cut is greater than 10 yards, a break is acceptable provided there is a suitable allowance. No single piece will be less than 2 flaw free yards. If more than 2 pieces are required to fill an order, the customer must approve this prior to shipping, regardless of length. In all cases of breaks in rolls this information must be noted on the stop tag as well as the packing slip. Shade and dye lot: For decorative and woven fabrics, a match is 4.0 to 5.0 on the ASTM Greyscale. For industrial and recreational fabrics a match is 3-4 to 5.0 ASTM Greyscale. Crocking: The transfer of color from a fabric to fabric through the process of rubbing. On some fabrics, such as suedes, free dye or fibres may remain on the surface possibly causing crocking to occur. For suedes, crocking is 3-4 on the AATCC Color Transference Scale. This rating is most prevalent for very dark or rich colors (i.e. black, navy, red). Roll Order Sizes: Roll lengths vary. Please confirm when placing orders for full rolls. Clearouts:

Clearouts or seconds may contain flaws and have been priced accordingly.

Visit www.jennisfabrics.com

11


Introduction

Color Change

Color Change Evaluating Color Change in Fabrics The “Greyscale For Evaluating Color Change” in fabrics is used as the industry standard of judgement. It is published by the American Association of Textile Chemists and Colorist (AATCC), and is used by all testing laboratories and most major mills. The Greyscale measures color change on a scale of 1 to 5. There are a total of 9 potential values that can be assigned to a fabric sample being tested for color change, (1, 1-2, 2, 2-3, 3, 3-4, 4, 4-5, 5). The number 1 represents the greatest difference and number 5 indicates that there has been no color change. Every fabric distributor can set their own standard of level of acceptance for color variation. Using the Greyscale measurement, J. Ennis Fabrics has established a standard of acceptance as a 4 or greater rating on the Greyscale for decorative fabrics, a 3-4 or greater for apparel, recreational, and industrial fabrics. Dye lots below 3-4 would be rejected for all industries. How the Greyscale Test Works The fabric to be tested is placed against the accepted original fabric color standard. A special grey paper, supplied by the AATCC, is placed equally over the two fabrics. This allows a neutral viewing background so that a fair visual judgement can be made of the grade value to be assigned. How the Greyscale Test is Implemented at J. Ennis Fabrics J. Ennis Fabrics has always had a high standard of quality assurance for the products we distribute. We work closely with our suppliers from the conception of a product, through it’s development and continually throughout it’s life cycle at the company. Every dye lot of goods is compared to a color standard for acceptance or rejection based on the “greyscale.” If the goods are graded below 3 on the greyscale, the dye lot is rejected and the process has to start again. Unfortunately, the rejection of a dye lot can delay delivery of goods by anywhere from 2 - 6 weeks. However, this process assures us of providing our customers with quality goods each and every time.

12

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


Introduction

Industry Standards

Industry Standards Seam allowance and Stitch Density Standard Performance Specifications for Upholstery Fabrics - Plain, Tufted, or Flocked ASTM D3597-02-D434 is a test method published by the American Society of Testing and Materials (ASTM). It indicates the standard performance specification of woven upholstery fabrics. There are specifications within this test method that indicate the industry standard for the sewing of woven upholstery fabrics. It requires the sewing of a seam using a minimum of seven and a maximum of eight stitches per inch using a seam allowance not less than ½ inch. One can expect seam slippage issues when an upholstery fabric is sewn with a stitch density of less than 7 stitches per inch and seam allowances of less than 0.5 inches, so please ensure you always follow the industry standard to avoid problems with seam slippage. Specification Guidelines for Contract Upholstery Textiles Here are some of the performance guidelines for contract textiles (commercial applications), as per the not-for-profit trade association, The Association for Contract Textiles. These guidelines are meant to help assist you when selecting an upholstery fabric for a commercial project, although product requirements will vary for each commercial project. Flammability:

California Technical Bulletin 117 - Section E - Class 1 (Pass)

Crocking:

AATCC 8-2001

Dry Crocking:

Grade 4 minimum

Wet Crocking:

Grade 3 minimum

Colorfastness to Light: AATCC 16 Option 1 or 3-2003 - Grade 4 minimum at 40 hours Pilling:

ASTM D3511-02 - Class 3 minimum

Breaking Strength: ASTM D5034-95 (2001) (Grab Test) - 50lbs. minimum in warp and weft Seam Slippage:

ASTM D3597-02-D434-95 - 25lbs. minimum in warp and weft

Abrasion Resistance: General Contract Upholstery:

ASTM D4157-02 (Wyzenbeek) - 15,000 Double rubs

ASTM D4866-98 (Martindale) - 20,000 Double rubs

Heavy Duty Contract Upholstery - Heavy duty end use applications include the following: hotel rooms/suites, conference rooms, and dining area usage.

ASTM D4157-02 (Wyzenbeek) - 30,000 Double rubs

ASTM D4966-98 (Martindale) - 40,000 Double rubs

For facilities that are in use for 24 hours per day, the abrasion resistance requirement for upholstered furniture may be higher than the requirement for heavy duty contract upholstery. *Please note that test are guidelines only and the commercial building contractor should specify any specific project requirements to the upholstery manufacturer prior to the manufacture of the furniture.

Visit www.jennisfabrics.com

13


Introduction

Terms & Conditions

Terms and Conditions Terms:

Payment terms are net 30 days from date of invoice. Shipments in Canada are F.O.B. Edmonton, Toronto, Vancouver. Shipments ins the U.S. are F.O.B. Indianapolis.

Overdue Accounts: A 1.5% service charge per month (18% per annum) will be charged on overdue accounts. Ordering:

When placing an order, please provide the following information: pattern name, color number, and shipping instructions. If exact color match is required, please request a cutting of present stock, or send a cutting to be matched. If matching a previous order, please quote the order number. If it is unavailable, send a cutting of the fabric for matching. Please note that dye lots may vary.

Back Orders:

Back ordered items will be shipped as soon as available unless advised otherwise by customer.

Reserved Orders: Reservations placed on fabric orders will be honored for 48 hours. Returns:

Arrangements must be made prior to return shipments. Please see the Returned Goods and Claims Policies. Please read our Quality Control Standards and Guidelines carefully. Fabric may not be returned for credit once it has been cut or marked. Inspect yardage for flaws, length, quality, and that it is the correct pattern and color before cutting. To ensure prompt credits on approved returns, please provide the following: invoice or packing slip number, pattern name, color number, yardage shipped and the reason for return. Refused shipments or cancellations after orders have been cut are subject to a 15% restocking charge. Cuts under 5 yards are not returnable.

Lost Goods:

Customers must advise J. Ennis Fabrics within 90 days of a shipping date that goods are lost in shipping, and a claim is required. We cannot honor any freight claims past this point.

Showroom Samples:

A deposit of twenty dollars ($20.00) per sample and a deposit of one hundred dollars ($100.00) per complete sample book will be collected at the time a customer completes a “Sample Loan Out Sheet.� All samples are expected to be returned to our showroom within 2 weeks at which time your deposit will be returned to you. If samples are not returned within 4 weeks the deposit will be forfeited.

J. Ennis Fabrics 2 Year Fabric Warranty J. Ennis Fabrics fabrics will be repaired or replaced if they fail to give normal wear for two years from date of delivery. This warranty expressly does not cover: - Damage caused by improper applications

- Cuts

- Burns

- Damage caused by improper installations

- Stains

- Pet damage

- Damage caused by unreasonable used

- Pilling

- Soiling

- Fading caused by sunlight (unless product is specified UV resistant) Claims will not be honored when covers have been removed for cleaning. This warranty does not apply to fabrics treated with nonfluorocarbon finishes. If the identical fabric is not available, J. Ennis Fabrics will provide an equivalent fabric. 3rd Party Processing: J. Ennis Fabrics may send goods to the laminator, quiltor, slitter or anywhere else the customer asks us to ship the goods. However, J. Ennis Fabrics is not responsible for good that we did not make arrangements for further processing. This information is offered for your general guidance only. It’s accurate to the best of our knowledge and is not intended to relieve the user from their responsibility to investigate and understand other pertinent sources of information and to comply with all laws and procedures applicable to the safe handling and use of these materials.

14

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


Introduction

Returns

Returned Goods and Claim Policies This section covers the J. Ennis Fabrics policies concerning returns and claims for fabrics and supplies. Each cut of fabric is accompanied by a tag describing the item ordered and the yardage shipped. These tags also contain information regarding flaws, the date and time of the order, the packing slip number, etc. Please read these tags thoroughly. Whenever the Quantity Ordered and the Quantity Shipped differ, there will be a mark denoting whether the cause was a flaw, an allowance or a given fabric situation. Given indicates that there was a small amount of yardage left on the roll and was forwarded to the customer at no charge Flawed indicates that there were imperfections within the yardage (as outlined in Quality Control Standards), therefore extra fabric has been allowed for them. Allowance indicates that you have been allowed extra fabric for a latent warp direction flaw. Description and Tag for / Comments will also help to identify the goods. Be sure to check these before cutting the material. The cutting of a fabric indicates acceptance. Fabric may not be returned for credit once it has been cut or marked. As well, any supply item sold in pre-packaged lots will not be accepted in less than complete lots. Returns When a mistake has been made by J. Ennis Fabrics the goods may be returned at no charge to the customer. In this case, a returned goods authorization is required and may be obtained by the customer either from their sales representative or the Customer Service Centre. Fabric may not be returned once it has been cut by the customer. In the course of discussing the nature of the complaint, it is often to the advantage of all concerned if an agreement can be reached for the customer to retain the goods at a discounted price, in an effort to save administrative return costs and freight. Please call for an authorization before returning goods. Due to freight costs, we cannot accept returns on cuts of fabric less than 5 linear yards, unless the problem was caused by J. Ennis Fabrics, such as the shipment of incorrect goods. Any goods not accompanied by a returned goods authorization number will automatically be assessed freight charges and restocking fees. The restocking fee is 15% on products returned for reasons other than an error by J. Ennis Fabrics. This covers the administrative costs of receiving and processing the transaction, as well as the inspection of the fabric prior to going into stock. These procedures plus the accounting and other administrative functions are expensive in that they are quite time consuming. These charges will be deducted from the credit that the return will generate. Returns will not be accepted on goods older than 90 days from the date of purchase. Adhesives are not accepted after 30 days due to shelf life. J. Ennis Fabrics is a customer service oriented company. Every effort is made to correct any mistake we have made, and wherever possible we will work with our customers to minimize the negative effects of a mistake. Warranty Claims Warranty periods vary by manufacturer and product. If you have a question or concern regarding the warranty on a purchase or an existing product in use, please contact your sales representative or our Customer Service Centre. All warranty claims are handled on an individual basis. To initiate a claim, contact your sales representative to get a claims form filled out and submitted. Due to the wide range of manufacturers and suppliers there is no standard for claims.

Copyright and Use Of Notation This catalogue is copy written and has been registered with the Canadian Intellectual Property Office. While we are pleased to have our customers use it as a source and a resource, we reserve all rights. No part of the catalogue may be reproduced or transmitted in any form without the prior written permission of J. Ennis Fabrics.

Visit www.jennisfabrics.com

15


Introduction

Yarn Characteristics

Yarn Characteristics Natural Fibres - Dyes, prints and takes special finishes well - Durable, high absorbency - Excellent resistance to pilling - Fair resistance to abrasion - Good resistance to soil when treated with a protective finish Cotton: Soft, cream colored cellulosic fibre from the cotton plant. Cotton is strong, sturdy, and the most versatile of the four natural fibres. It is used more often in upholstered furniture than other natural fibres. Silk:

Fine, strong, shiny protein fibre made from the silkworms spun cocoon. It is used infrequently due to cost.

Wool: Soft, bulky protein fibre made from the fleece of sheep or angora and cashmere goats. Specialty fibres come from alpaca, camel, and vicuna. Again, used infrequently due to cost. Linen: Crisp, beige colored cellulosic fibre from flax, used with fibre blends in upholstery to give a textured look. Blends No single fibre of finish is superior to all others. Each has its advantages and disadvantages. Certain unique characteristics can make a fibre highly desirable for upholstered furniture. Blending fibres together takes advantage of the best properties of each fibre and can make a better fabric. For example, a sturdy fibre which does not take dye well can be blended with a more fragile one that dyes beautifully. The result: a beautiful heavy duty fabric that is suitable for use in heavier applications. Man-made Fibres - Available in deep, rich, vivid colors - Strong and durable - Easy to clean, dries quickly - Resists spotting due to low absorbency - Resistant to moths, mildew and rotting Acetate: Made from cellulose and has a luxurious look and feel. Acetate requires special dyes, but colors are permanent. It is very economical, yet looks like silk when blended with other fibres. Acrylic: The most natural of the man-made fibres. It is soft, warm, lightweight and is used to make many of today’s soft plush or fur-like fabrics. Dralon: A rich, lustrous appearing acrylic fibre that offers high wear resistance, good air permeability, excellent color fastness, pleasing hand and appearance, unusual luster in the pile, and is moth proof and easily cleaned. Nylon: Smooth, lustrous and the strongest of all fibers. It can be made into smooth, flat, shiny fabrics, pile fabrics or textured fabrics Olefin: The lightest of all man-made fibres providing good bulk and surface coverage. Marquesa LanaŽ and TraceŽ Olefin: Filament versions of olefin. The filament construction makes the fabric easy to clean, lends tremendous abrasion resistance and inherent fire retardancy. Polyester: Soft, lightweight fibre with great strength and good resistance to abrasion. It has been used successfully in easy-to-care for apparel and is now available in upholstery fabrics. Rayon: The first of the man-made fibres. It is almost pure cellulose and is soft and comfortable with a good feel. It looks like silk when combined with other fibres and is easy to clean.

16

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


Introduction

Yardage Chart

Yardage Chart

Visit www.jennisfabrics.com

17


Introduction

Cleaning Codes

Fabric Cleaning Codes Fabric cleaning codes determine the best and least expensive methods of home cleaning for your furniture. Due to the various ways that furniture can be stained or damaged, there is no guarantee that the results will be completely successful. Use the suggested methods at your own discretion. Always pretest on a small area before proceeding. To prevent overall soil from dust and grime, frequent vacuuming or light brushing is recommended. Use a professional cleaning service when an overall soiled condition has been reached. Water Based Cleaner - W Spot clean using the foam only from a water-based cleaning agent such as a mild detergent or non-solvent upholstery shampoo product. Apply foam with a soft brush in a circular motion. Vacuum when dry. Solvent Cleaner - S Spot clean using mild water-free solvent or dry cleaning product. Clean only in well ventilated room and avoid any product containing Carbon Tetrachloride or other toxic materials. Water/Solvent Cleaner - WS Spot clean with a mild solvent, an upholstery shampoo or the foam from a mild detergent. When using a solvent or dry cleaning product, follow the instruction carefully and clean only in a well ventilated room. Avoid any product that contains Carbon Tetrachloride or other toxic materials. With either method, pretest a small area before proceeding. Mild Soap and Water - MSW Clean with mild soap and water. Machine Wash - MW Machine wash with care. Hand Wash and Drip Dry - HWDD Requires hand washing and drip dried. Dry Clean Only - D Requires professional dry cleaning.

18

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


Introduction

Sunbrella®

Sunbrella® Products: Fabrication, Care & Cleaning Sunbrella® is made from 100% Sunbrella® solution dyed acrylic fibre which gives it a color brightness that is unsurpassed. Sunbrella® fabric’s has a 10 year limited warranty for awning and marine fabric and 5 year limited warranty for furniture fabric, guaranteed for a period of five years against loss of color or strength from normal exposure conditions including sunlight, mildew, rot and atmospheric chemicals. Care & Cleaning One of the best ways to keep Sunbrella® fabrics looking good and to delay deep or vigorous cleaning is to properly maintain the fabrics. This can be accomplished by simply brushing off dirt before it becomes embedded in the fabrics, wiping up spills as soon as they occur or spot cleaning soon after stains occur. When cleaning Sunbrella fabrics, it is important to observe the following: - Always use a mild soap such as Ivory Snow, Dreft or Woolite. - Water should be cold to lukewarm. (Never more than 38°C/100°F.) - Rinse thoroughly to remove all soap residue. - Air dry only. Never apply heat to Sunbrella fabrics. General or light cleaning: To clean Sunbrella while still on an awning frame, follow these simple steps: 1. Brush off loose dirt. 2. Hose down. 3. Prepare a cleaning solution of water and mild soap such as Ivory Snow, Dreft or Woolite (no detergents). 4. Use a soft bristle brush to clean. 5. Allow cleaning solution to soak into the fabric. 6. Rinse thoroughly until all soap residue is removed. 7. Air dry. May not require re-treatment depending on the age of the fabric. If stubborn stains persist, you can use a diluted chlorine bleach/ soap mixture for spot cleaning of mildew, roof run-off or other similar stains (see our Stain Chart for specific recommendations). Heavy cleaning for stubborn stains and mildew: Sunbrella fabric does not promote mildew growth, however, mildew may grow on dirt and other foreign substances that are not removed from the fabric. To clean mildew, or other stubborn stains: 1. Make a solution of 8 oz. (1 cup) of chlorine bleach, 2 oz. (1/4 cup) of mild soap and/or detergent, 1 gallon of water. 2. Clean with soft bristle brush. 3. Allow mixture to soak into fabric for up to 15 minutes. 4. Rinse thoroughly until all soap residue is removed. 5. Air dry. Repeat if necessary. Re-treatment of fabric for water and stain resistance will be necessary. Remember to protect the area around your Sunbrella if using a bleach solution. Carpet or other fabrics that are not Sunbrella may have an adverse reaction to the bleach.

Visit www.jennisfabrics.com

19


Introduction

Sunbrella®

Sunbrella® Products: Fabrication, Care & Cleaning If an awning is suitable in size for a washing machine, these steps should be followed: 1. Use mild soap and/or detergent. For heavier stains add 1 cup of bleach to wash. 2. Wash and rinse in cold water. 3. Air dry. Never apply heat to Sunbrella. Re-treatment for water and stain resistance will be necessary after machine washing. Re-treating the fabric As part of the finishing process, Sunbrella fabrics are treated with a fluorocarbon finish, which enhances water repellency. This finish is designed to last for several years, but must be replenished after a thorough cleaning. Based on test results, Glen Raven recommends 303 High Tech Fabric Guard™ as the preferred re-treatment product for Sunbrella fabrics. Fabrics should be re-treated after thorough cleaning or after five years of use. Applying 303 High Tech Fabric Guard 303 should be applied to Sunbrella fabrics after each thorough cleaning, which typically removes the original finish and reduces the fabric’s water repellency. 1. Clean Sunbrella fabric, using one of the cleaning methods. 2. Allow Sunbrella to completely air dry. 3. Apply 303 Fabric Guard in a well ventilated area following instructions on the container. Apply 303 in a thin, even coat and allow fabric to dry completely. 4. Apply a second thin, even coating of 303. (Two light coatings are more effective in restoring fabric water resistance than a single heavy coating. A 15 oz. bottle provides coverage of up to 50 square feet of fabric.) Professional awning cleaners You may have access to professional awning cleaning firms. In evaluating the services of a professional firm, you should inquire about a firm’s experience in working with Sunbrella fabrics and knowledge of cleaning and re-treatment requirements. DO NOT dry clean Sunbrella fabrics. Helpful hints Protect the area around the Sunbrella fabric when using a bleach solution – bleach may discolor non-Sunbrella® fabrics. Always rinse Sunbrella thoroughly to completely remove bleach. Sunbrella air dries very quickly. Machine drying is not necessary. If fabric has some wrinkling, use an iron, if necessary, but only on the synthetic* setting. As some irons exceed the recommended 100°F/38°C temperature on the synthetic setting, test a small inconspicuous area before ironing entire piece. DO NOT use a steamer or iron set to steam setting. Use of bleach and/or advanced age of the fabric application may impact the deterioration of the sewing thread and other non-Sunbrella® components.

Sunbrella is registered trademark of Glen Raven, Inc.

20

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


Introduction

Sunbrella®

Sunbrella® Products: Fabrication, Care and Cleaning Cutting - Do not tear fabric. Cut with scissors or a knife. If as a fused edge is desired, hot wire or hot blade cutting instruments may be used. Proper ventilation should be used when cutting with a hot blade instrument. - Under ordinary conditions, Sunbrella® will not shrink. (It is recommended that an awning/canopy be undercut approximately 0.51.0% both in length and width of the awning) Sewing - A double needle machine equipped with a puller is recommended. Needle gauge should be wide, if possible ¾”. Use of chain stitch is preferable in seaming the widths of cloth. - A lock stitch with a walking foot is recommended for hemming. - For both seaming and hemming the top thread should be polyester size F(16) or FF(12). Light to medium tension is recommended on both top and bottom thread. - Use size F(16) thread for the looper thread on chain stitch machines. - Lock stitch machines should use the same size bobbin thread as on top. - Use size 22 needle with size FF thread on lock stitch machines. - For chain stitch machines, when using size FF thread, the needle size should be 060. For thread size F, the needle size should be 054. Note: It is always advisable to use the smallest size needle with which the machine will stitch properly. For best results, needles should be inspected and changed frequently. - Use of acrylic braid fringe is recommended. Centerfold or flat woven can also be used. - To minimize puckering when seaming, tension should be maintained both in front of and behind the needle. - If needle hole leakage is a problem, an acrylic seam sealer is recommended. Heat Sealing Sunbrella® can be heat sealed, A radio-frequency heat sealing machine equipped with a thermo-heated bar is recommended for best results. A layer of Teflon should be attached to the bar to prevent scorching of the fabric. Due to variations in equipment and physical properties of Sunbrella® (color) it may be necessary to experiment with specific temperature settings and dwell times. It is recommended that the manufacturer of the heat sealing equipment used be consulted in order to determine the best procedure to follow with a particular machine. Installation of Fabrication Tips - It is recommended no rope pull-ups be used, but if necessary the pulleys should be offset two of three inches so the ropes wipe the fabric rather than concentrate their wear in one line. - Installations should be made in such a manner as to avoid flapping or rubbing the fabric against walls, posts, shrubbery, etc. - There should be no sharp or rough spots in the framework. Reinforcements should be used on parts of the fabric that will come in direct contact with the framework. This will reduce the amount of wear to the fabric and minimize the possibility of leakage. - Rafters should be no more than 92 cm (36”) apart and lacing bands should be used. - A double front bard should be used on canopy type installations. - Avoid flat or nearly flat installations. A minimal pitch of 1’ of drop per 3’ of projection is recommended. If less than optimal pitch exists: increase the number of rafters, install drain grommets (weepers) and use a double front bar to insure maximum tension. - Installations that have underliners should have drain grommets. - Use large enough pipe in framework to ensure a stable installation. - In marine applications, the same general rules apply. A reinforcement should be used in areas where abrasion is likely to occur. Do not piece covers on top of installations. This can result in abrasion and deterioration. For boat covers that span large areas, a mooring pole is recommended to maintain adequate tension and drainage.

Visit www.jennisfabrics.com

21


Introduction

Tempotest®

Tempotest® by Para Branded Parà Tempotest® fabrics benefit from a finishing process developed in partnership with Dupont™ Teflon®. This nanometric particle surface treatment is the fruit of research by Para for the application of solar protection. All Parà Tempotest® finishing technology uses a finish that forms a molecular barrier surrounding each fiber, providing a double-action protection self-cleaning system that repels water and oil based stains. During the production process, the product is introduced into the finishing bath as a micrometric emulsion that creates a strong bond with the fibre during the polymerization phase of the fabric to form an invisible barrier. When marks form, the highly repellent component contained in the nanoscale barrier helps water and rain to wash away the dirt. Marks are eliminated from the fabric so its beauty and performance are preserved unaltered, as well its effectiveness and wear over time. To ensure your Tempotest fabric remains looking as good as new, follow these guidelines: •

Always install awning fabrics with adequate tension and gradient to ensure proper run-off, avoid the buildup of water, and prevent bagging in the middle of the awning.

Do not fold up or put away awnings when wet. If unavoidable be sure to open the cover to let dry.

Close awnings in presence of strong wind and rain to prevent damage.

To remove dirt and stains please use only a mild soap. Never use any other chemical product or detergent.

Remove dust periodically with a brush or a vacuum cleaner.

Periodically rinse with clear water at a temperature of 30°C (86°F)

Surface scratches may be created during sewing and project construction. These may create an optical effect that is visible when held up to light, and may be particularly visible on light colored fabrics. Please take caution: “these scratches - known as “cobwebs” - are inherent to the fabric and are not considered flaws.

Tempotest® is a technical fabric manufactured with solution dyed acrylic fibre that, thanks to its chemical composition, is mould resistant by nature. Parà subjects all its fabrics to a special treatment, with a Teflon based protection with nanotechnology that gives the fabric partial repellent characteristics to dirt formation, oil and water repellency for a long time and an excellent dimensional stability. Tempotest® fabric quality is guaranteed for 8 years. This guarantee is exclusively valid for only color loss after normal exposure to the sun, salinity and general atmospheric conditions. Every single awning made with Parà fabrics contains a sewn textile certificate showing the cleaning procedure and advice on maintenance. In spite of the technical perfection in weaving, finishing and final make-up, some fabrics may present some characteristics that, sometimes, look erroneously like faults. In order to avoid any claim, Parà thinks it right to inform the consumer about the following characteristics: Weave effects - they develop near the seams and the side edges. Double thickness, due to the overlap of the fabric after the rolling, creates tensions that could give rise to so-called “embossings”. Crease marks - Near the crease of the fabric, more often apparent in light colors, some surface effects, called “cobweb or marbled”, are created, which, against the light seem dark and may appear as dirty marks. Microholes - The acrylic fabric is treated with fluororesins that, besides granting the well-known positive technical characteristics of soil repellency, make it stiffer. This particular aspect is an indispensable advantage for the majority of Tempotest® applications. However, when Tempotest® fabric is bent during making-up canopies, it is possible to see some microholes near the creases due to the stiffness of the cloth. German trade associations have issued a specific study on this subject weave effects, crease marks, microholes, entitled: “Fabric for Awnings - Frontiers of weaving and make-up technique”. This research reports a wide range of technical characteristics, which because they are so, can not be considered as faults. Such technical characteristics do not alter at all the quality of the fabrics. Consequently, in case of consumer’s complaint, there is no ground for a dispute on the product.

22

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


Introduction

Naugahyde®

Naugahyde® Care and Cleaning Naugahyde® brand fabric with advanced BeautyGard™ is an exceptional choice as an upholstery fabric. Crafted in America and containing the finest materials available, Naugahyde® is a practical and popular choice among designers, specifiers and consumers. Antimicrobial: Naugahyde with Advanced BeautyGard provides outstanding protection in difficult medical and health care environments. Contains agents effective against bacterial and fungal microorganisms. Disinfectability: High-Level Disinfectability: Naugahyde® BeautyGard™ has been formulated to achieve the high level disinfectability required in medical applications. It may be safely subjected to cleaning with disinfectant products containing bleach at full strength or glutaraldehydes. Intermediate-Level Disinfectability may be achieved by using bleach diluted 1:10 or rubbing alcohol. For rubbing alcohol to achieve intermediate level disinfectability, puddling must remain on surfaces until evaporation occurs. Due to its ease of application, bleach is the preferred disinfectant. Cleaning: Cleaning is a breeze with Naugahyde brand fabric and its Advanced BeautyGard protective finish. While staining and soiling exposures are common to upholstery fabrics, most stain and soiling may be removed by using the simple cleaning methods that follow: For Light Soiling, the most common of problems 1. A solution of 10% household liquid dish soap with warm water applied with a soft damp cloth. 2. If necessary, a solution of liquid cleanser and water applied with a soft bristle brush. Wipe away the residue with a water dampened cloth. For Heavier Soiling 1. Dampen a soft cloth with lighter fluid (naphtha) and rub gently. Rinse with a water dampened cloth. Note: Use extreme caution with this method. Complete only in a well-ventilated area and away from any open flame. You should try this method on an inconspicuous spot before using it on the original stain/soiling. For the most difficult stains, follow these steps 1. Dampen a soft, white cloth with a solution of household bleach (sodium hypochlorite): 10% bleach, 90% water. 2. Rub gently. 3. Rinse with a water dampened cloth to remove bleach concentration. 4. If necessary, allow a 1:10 diluted bleach solution to puddle on the affected area or apply with a soaked cloth for approximately 30 minutes. Rinse with a water dampened cloth to remove any remaining bleach concentration. Note: You should try this method on an inconspicuous spot before using it on the original stain/soiling. To restore luster, a light coat of spray furniture wax can be used. Apply for 30 seconds and follow with a light buffing using a clean white cloth. Please Review Carefully CAUTION: Should you desire to use other cleaning methods, carefully try them in an inconspicuous area to determine potential damage to the material. Never use harsh solvents or cleaners which are intended for industrial applications. To clean stained or soiled areas, a soft white cloth is recommended. Avoid use of paper towels. CAUTION: Cleaning products may be harmful/irritating to your skin, eyes, etc. Use protective gloves and eye protection. Do not inhale or swallow any cleaning product. Protect surrounding area/clothing from exposure. Use in a well ventilated area. Follow all product manufacturer’s warnings. Naugahyde cannot be held responsible for damage or injuries resulting from the use or misuse of cleaning products. Our Naugahyde collections: Bourbon Street, Burkshire, Chameã II, English Pub, Marblestone, Neochrome, NaugaSoft, NaugaSylk, Rogue II, Spirit Millennium, Surfside and Zodiac.

Visit www.jennisfabrics.com

23


ADH

Adhesives

Application Chart

Adhesive Applications Chart For detailed information on the listed adhesives products, refer to the page number. This chart is based on manufacturers recommendations. For more information, please call our toll free number or contact you sales representative. For tips on adhesives, please see the bottom of page 26. Application

Aerosol Spray

Part#

Page Bulk/Liquid - Brush Part# Page Bulk - Spray/Brush Part#

Page

To Foam

74 Spray 76 Spray 80 Supertrim 470 Feather-Spray JEF Bond 88 JEF Bond 99

1021 1031 1041 1011 1118 1119

25 25 25 26 27 27

74 Spray 76 Spray 80 Supertrim 476 Spray JEF Bond 88 JEF Bond 99

1021 1031 1041 1132 1118 1119

25 25 25 26 27 27

74 Spray 76 Spray 470 Feather-Spray 476 Spray JEF Bond 88 JEF Bond 99

1021 1031 1011 1132 1118 1119

25 25 26 26 27 27

Foam

To Fabric

Industrial PVC

Fabric & Upholstery Vinyl

To Surfaces

-

-

-

-

-

-

-

-

1123 1122 1140 1145

29 30 32 31

478 Fastbond™ Helmiprene 1535 JEF Bond 2000

1123 1122 1140 1145

29 30 32 31

478 EC 2218 Fastbond™ Helmiprene 1535 JEF Bond 2000

1123 1128 1122 1140 1145

29 30 30 32 31

To Foam

See foam to fabric

To Fabric

76 Spray 470 Feather-Spray 476 Spray JEF Bond 99

1031 1011 1132 1119

25 26 26 27

504 Latex

1110 28

Helmiprene 4510 JEFBond 3000

1139 32 1147 31

To Surfaces (Wood, Metal, Plastic)

76 Spray 476 Spray JEF Bond 99

1031 25 1132 26 1119 27

504 Latex

1110 28

Helmiprene 4510 JEFBond 3000

1139 32 1147 31

To PVC

80 Supertrim

1041 25

HH-66 Vyna Bond

1166 34 1135 33

Helmiprene 4510

1139 32

To Foam

See foam to fabric

To Surfaces (Wood, Metal, Plastics)

80 Supertrim

1041 25

HH-66 VLP Vyna Bond

1166 34 1133 33 1135 33

EC 2218 Helmiprene 4510 JEF Bond 3000

1128 30 1139 32 1147 31

Carpet Outdoor/Marine to surfaces

80 Supertrim JEF Bond 99

1041 25 1119 27

HH-66

1166 34

Helmiprene 4510 JEF Bond 3000

1139 32 1147 31

Rubber, Leather to Self & Surfaces

80 Supertrim

1041 25

EC 2218 JEF Bond 3000

1128 30 1147 31

Wood to Wood

24

-

478 Fastbond™ Helmiprene 1535 JEF Bond 2000

-

Gimps to Wood, Fabric

-

Needle Holes

-

-

-

-

-

-

560 White Resin

1113 28

-

-

-

-

-

504 Latex Glue Sticks

1110 28 1153 35

-

-

-

-

-

Plastiseam®

1137 34

-

-

-

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


74 Foam Fabric Adhesive

ADH

Adhesives

AE

Aerosols

1021

• Price Breaks: Each / 12 • Unit of measure: 17.25 oz./489 g can • Specially Formulated for Foams & Upholstery Type Fabrics • Permanently bonds foam and a wide range of fabrics to wood, rigid plastic or themselves. Ideal for foam backed fabrics such as display fabrics or headliners. Very fast tacking speeds up complex jobs. Easily controlled spray pattern. Works very well on both urethane and latex foams and delivers a soft glue line. High solids, high coverage rates. Dries tack free and odor free.

76 Spray Adhesive

1031

• Price Breaks: Each / 12 • Unit of measure: 16.2 oz./460 g can • Strongest, most versatile adhesive on the market • Well known 3M quality in a premium non-misting adhesive. Features a unique lace-like spray pattern to allow you to vary spray width and rate, giving you the control to spray to the edge without going over. Hi-Tack 76 bonds fiberglass insulation, fabric, carpet, supported vinyl, paper, felt, burlap, cardboard, cork, foil, rubber, many plastics, etc., to themselves and to wood, metal, glass and other surfaces. Not recommended for Styrofoam. Allow up to 10 minutes join time with single surface applications, and up to 60 minutes when applied to both surfaces.

80 Supertrim Adhesive

1041

• Price Breaks: Each / 12 • Unit of measure: 18 oz./510 g can • Supertrim Adhesive: Contact Cement in an Aerosol • Spray Adhesive from 3M for rubber and vinyl is a high strength neoprene contact adhesive. Excellent heat resistance, maintaining strength at temperatures up to 93°C (200°F). Bonds rubber, supported vinyl, leather, flexible foam and plastic to themselves or wood, metal, particle board and other material. Not recommended for polyethylene or polypropylene. Faster drying than traditional contact cements, with a tack range up to 30 minutes. It will not break down with heat or water, so it is ideal for heavy weight headliners, hood silencer pads and vinyl tops. Contains no ozone depleting ingredients.

Visit www.jennisfabrics.com

25


ADH

Adhesives

AE

Aerosols 470 Feather-Spray

1011 • Price Breaks: Each / 12 • Unit of measure: 13.12 oz./375 g aerosol can • All purpose feather spray adhesive • Feather-Spray 470 provides a strong tack and builds strength quickly. It is excellent for bonding fabric, paper, burlap, cardboard, foam, felt, cork, rubber and plastics to themselves and to metal, glass, wood and other surfaces. An efficient and economical solution for your bonding needs.

476 Spray Adhesive

1132 • Price Breaks: Each / 12 • Unit of measure: 13.12 oz./375 g aerosol can • Premium Adhesive • 476 Spray Adhesive is quick tacking and fast curing to ensure a strong and permanent bond. The unique product formulation and adjustable 3-way valve work together to provide optimum spray control for any application. The slim 13.12 oz. (375 g) can has been sized for easier handling. Engineered to minimize wasteful soak-in. Adjustable nozzle eliminates overspray and gives smooth, even coverage. This new formula eliminates all ozone depleting substances and chlorinated solvents. It is safer to use and better for the environment.

Tips on Adhesives • Many two surface adhesives like contact cement allow a tack time where once the pieces are touched together, there is no chance of shifting or adjusting them. For larger areas, once the contact cement has been applied, place wax paper in overlapping sheets over the entire surface. Then position the piece to be bonded. It can be moved around a bit on the wax paper sheets. When properly aligned remove one sheet of the wax paper at a time. Whenever possible work from the center out. When all the wax paper has been removed, apply whatever bonding pressure is recommended with the particular adhesive. • Hot melt adhesives can cool prior to bonding large surfaces. If possible, pre-heat the surface itself using a hot air heat gun.* This will provide a longer working time for successful adhesion. • *NOTE: Use proper judgement when using this method. Preheating may damage material being used. Never use a hot air heat gun to speed drying time of adhesive product: many adhesives are flammable.

26

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


ADH

Adhesives

AE

Aerosols

JEF Bond 88 Spray Adhesive 1118 • Price Breaks: Each / 12 / 60 • Unit of measure: 12 oz./340 g aerosol can • Economical Foam/Fabric Adhesive • JEF Bond adhesives are an effective and economical alternative to higher priced products. Designed to bond urethane foams and fabrics to metals, supported vinyls, wood, paper and leather. Has a unique lace spay pattern offering low soak in for a soft pliable bond. It has a fan spray tip for controlled placement of the glue. This product offers a fast tack while being economical for the user. For best results, surfaces must be clean and dry and temperatures above 18°C (65°F). Shelf life of one year.

JEF Bond 99 Trim Adhesive 1119 • Price Breaks: Each / 12 • Unit of measure: 12 oz./340 g aerosol can • All Purpose Spray Adhesive • JEF Bond 99 is designed to work on urethane foam, fabrics, metals, wood, paper and leather. It is an excellent adhesive for attaching headliner fabrics to molded headliner substrates. It is also highly recommended for bonding high pressure plastic laminates to most substrates. Its unique lace spray pattern offers low soak in for a better, soft, pliable bond. It has a fan spray tip for controlled placement of the glue. This product is fast tacking and offers higher temperature resistance than most pressure sensitive adhesives. Not recommended for non-backed vinyl fabric. Do not use on plasticized vinyl or copper. Complete directions are listed on the can.

Be sure to see JEF Bond Bulk adhesives on page 31.

Visit www.jennisfabrics.com

27


ADH

Adhesives

BU

Bulk

Bulk Adhesives & the Transportation of Dangerous Goods Act Some of the bulk adhesives fall under the Transportation of Dangerous Goods Act. While this does not prohibit the shipping of these items, there are charges incurred by various carriers in order to cover the expense of the administrative and special handling requirements of the act. Therefore; some of these items will have a Dangerous Goods Handling Fee attached to them. This fee will vary from carrier to carrier; the Customer Service Centre can inform you at the time you place your order of the amount of surcharge, if it is applicable. These items will be identified in the catalogue with the following symbols:

or

1110

504 Latex Adhesive

• Price Breaks: Each / 12 • Unit of measure: 17.5 oz./500 mL bottle • Bonding Latex Adhesive for gimps, trims and cloths • 504 Latex has a primary application of cementing cloth or fabrics to almost any other type of cloth, material, wood or metal. Firmly retains decorative scroll gimps in complex patterns and shapes. Squeeze tube container design allows careful placement of adhesive only where required. Water resistant. Note: Available in gallon (4.5 L) jug on special order.

560 White Resin Glue

1113 • Price Breaks: Each / 12 • Unit of measure: 17.5 oz./500 mL bottle • Wood to wood and Porous materials adhesive • 560 white resin glue is ready to use water resistant glue for bonding wood, wallboard, leather, cloth, paper, mosaic tiles, linoleum and most porous materials. Gives a bond stronger than the original materials (3000 lb./1361 kg. bonding strength). Must be clamped for 30 minutes to give full strength. Ideal for joining woods and frame repairs. Nontoxic and non-flammable.

28

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


478 Foam Adhesive

ADH

Adhesives

BU

Bulk

1123

• Price Breaks: Each • Unit of measure: 1.1 gallon/4 L can

478 Foam Adhesive

1124

• Price Breaks: Each • Unit of measure: 5.3 gallons/20 L can

Foam Adhesive for Low Pressure Sprayers Easy Stik® 478 Foam Adhesive is a fast tacking, non-flammable adhesive for polyurethane or latex foam. Specifically designed for use with low pressure spray equipment. This green opaque liquid gives soft, non-dimpling bonds and is suitable for boxing, taping, slicing and laminating foams to themselves, wood, metal and cloth. Excellent green strength (initial bond strength), high solids, and long open time. Give a strong permanent bond and sprays without dripping, giving higher yields with a light application. Important: This product has a strong solvent smell. Use in well ventilated areas. Contains methylene chloride which degrades aluminum equipment. Use stainless steel components (see 118 Glue gun part #1158 with stainless steel accessories on page 16). Contains No 1.1.1 Trichloroethane. Product has a 6 month shelf life. Recommended solvent is C699 Solvent Cleaner, part #1141 (4 L).

C699 Solvent/Cleaner

1141

• Price Breaks: Each / 4 • Unit of measure: 4 quarts/3.8 L pail • Solvent Cleaner • C699 solvent/cleaner is a dichloromethane base solvent that can be used to thin out 478 foam adhesive and Helmiprene products, as well as to clean equipment used with these and similarly based adhesives.

Visit www.jennisfabrics.com

29


ADH

Adhesives

BU

Bulk

3M™ Fastbond™ Foam Adhesive 100 A powerful water based adhesive with the performance you want for reliable bonding and economical dispensing. 3M™ Fastbond™ Foam Adhesive 100 is a one part, neoprene formulation that can replace solvent-based adhesives. The water based formulation in the wet state is non-flammable, creating a safer work environment and avoiding Dangerous Goods handling expenses. Fast tacking to help speed component assembly. Holds seams and curves within 15 seconds. 20 minute open time for repositioning after initial tack and to meet various assembly process requirements. Spray multiple components at one time for efficient assembly. Bonds leather to foam with foam tearing strength and a soft bond line that compliments the leather’s suppleness. Non-dimpling formulation and soft bond lines of Fastbond™ Foam Adhesive 100 contribute to aesthetics and feel. The neoprene formulation resists up to 110°C (230°F), meeting many automotive applications. Better value due to exceptionally high coverage. Long lasting 3M™ Fastbond™ gives yields up to 1000 sq. feet per gallon. One gallon (3.8 L) provides the same coverages as 3-4 gallons (11.4 - 15.1 L) of solvent adhesive. Only 10 psi of pressure is needed for spraying, allowing for a thinner coat of adhesive. Note: This product is not freeze-thaw stable. Winter shipping presents a freezing hazard. Best storage temperature is between 15 27°C (60-80°F). Only stainless steel equipment is recommended, anything else will be prone to rusting.

Fastbond™ Foam Adhesive 100

1122 • Price Breaks: Each • Unit of measure: 5 gallon/18.9 L jug • 3M Fastbond Foam Adhesive 100 is a one-part, water-dispersed, fast setting adhesive. This neoprene-based product bonds many porous substrates to porous or non-porous substrates with minimal dry time. Adheres to many types of flexible polyurethane foam, latex foam fabric, polyester fiberfill, wood, plywood, particleboard and many plastic and metal surfaces.

EC 2218 (No. 5) Adhesive

1128 • Price Breaks: Each • Unit of measure: 5 gallons/18.9 L pail • Bond Plastic with laminates to wood or metal with this automotive specialist. • 3M’s EC 2218 (formerly #5 Green) is a high strength adhesive primarily designed to be used as a contact adhesive for bonds of plastic laminates to wood and metal. It has also been used extensively for auto trims, headliners, door panels or any cloth to metal applications. This flammable product has been particularly noted over other adhesives of this type for its long bonding range, rapid rate of strength buildup, high adhesion to steel, high temperature softening point and its excellent spray qualities. A premium product from a name you can trust. This product requires a stainless steel tube when spraying. Easily sprayed with our 118 Glue gun, part #1158. See page 36.

30

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


JEF Bond 2000 Foam Adhesive

ADH

Adhesives

BU

Bulk

1145

• Price Breaks: Each / 4 • Unit of measure: 1.1 gallon/4 L can

JEF Bond 2000 Foam Adhesive 1146 • Price Breaks: Each • Unit of measure: 5 gallons/18.9 L can

JEF Bond 2000: Economical & Effective New Foam Adhesive JEF Bond 2000 is a new brand of foam adhesive. It is suitable for laminating most substrates including closed and open cell urethane foams, fabrics, metal, wood and plastics. Single sided application is sufficient in many cases, however, as with most adhesives a uniform coat applied to both surfaces will yield the strongest bonds. Reduce your costs of production with this versatile and economical new bulk adhesive. This product has a shelf life of one year. Flammable. Do not mix with other adhesives.

JEF Bond 3000: Finally an Affordable Landau & Trim Adhesive JEF Bond 3000 Green is specially formulated to bond cloth back vinyls to many substrates including enamel, metal, canvas, rubber, most plastics and many other synthetic materials. This adhesive requires a two surface application to work material or insufficient solids will compromise the results. An economical alternative to expensive traditional trim adhesives. This product has a shelf life of one year. Flammable. Do not mix with other adhesives.

JEF Bond 3000 Adhesive

1147

• Price Breaks: Each / 4 • Unit of measure: 1.1 gallon/4 L can

JEF Bond 3000 Landau Top Adhesive 1148

• Price Breaks: Each / 4 • Unit of measure: 5 gallons/18.9 L can

Visit www.jennisfabrics.com

31


ADH

Adhesives

BU

Bulk

Helmiprene 4510 Adhesive 1139 • Price Breaks: Each • Unit of measure: 5 gallons/18.9 L pail • A N/F high performance neoprene spray grade contact adhesive designed for versatility, that is fast drying with high heat resistance and excellent for hand spraying operations. Excellent bond adhesion to a variety of substrates including: particleboard, DHPL, plywood, steel, rigid plastics, and rigid urethane. Natural color. • Recommended to use stainless steel equipment as this product will react with aluminum alloys at normal temperatures.

Helmiprene 1535 Pink Adhesive

1140 • Price Breaks: Each • Unit of measure: 5 gallons/18.9 L pail • Multipurpose Upholstery Adhesive for Spray Equipment • Helmiprene 1535 is used in the foam fabricating and conversion industries for bonding foam to itself and to many other materials including polyester fiberfill, wood, plywood, particleboard and many plastic and metal surfaces. The adhesive exhibits aggressive tack, high green strength and rapid development of bonds stronger than substrate foam materials. Helmiprene 1535 dries to a soft, flexible, non-staining and non-dimpling film. • Surface preparation: Use only clean, dry surfaces. Surfaces contaminated with oil, grease, or release agents should be cleaned with Helmitin Solvent Cleaner 699.

VLP Vinyl Liquid Patch Directions Directions: Before making repairs, the area must be cleaned with rubbing alcohol. After cleaning, trim any loose threads. Use only in temperatures above 16°C (50°F). Long tears or split seams: Push vinyl together; to hold use long strips of masking tape, 1” apart. Apply VLP to the areas between the tape strips and allow to dry for 30 minutes. Remove the tape and apply VLP where the tape was. Allow to dry for 30 minutes. Apply a final coat ½” wide along entire repair and allow to dry for 4 hours before use. Short tears: Apply 2 coats of VLP ½” wide along tear. Allow to dry for 4 hours before use. Large holes, cigarette burns: Cut damaged area to form a square or rectangle. Trim a piece of matching vinyl to fit and tape in place. Tack with VLP. Allow to dry for 30 minutes, then follow procedure for long tears. To remove glossy appearance: When the repair is dry, apply a small amount of VLP to the mend. Dab with a lint free cloth until the gloss disappears. The finished repair can be painted with vinyl paint. See next page.

32

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


ADH

Adhesives

BU

Bulk

VLP Vinyl Liquid Patch 1133 • Price Breaks: Each / 12 / 60 • Unit of measure: 1 oz./28 mL tube • Upholstery vinyl repairs stronger than original • VLP Vinyl Liquid Patch has thousands of applications. Any vinyl can be repaired with this clear liquid. Catch small rips before they become large ones. Large rips can be taped and repaired in stages. Can be used to tack, then glue patches into larger holes. Dries to a glossy finish, which can be removed if desire. Finished repairs can be painted with vinyl paint (see Color Coat Sprays on page 40.) See application instruction on previous page.

Vyna Bond Vinyl Adhesive

1135

• Price Breaks: Each / 12 • Unit of measure: 12 oz./355 mL can

Vyna Bond Vinyl Adhesive 1136 • Price Breaks: Each / 4 • Unit of measure: 1 gallon/3.8 L can

Bond Flexible Vinyls/Plastics Vyna Bond is an ideal adhesive for flexible vinyl products. It is used on installations such as air structures, athletic mats, cargo bags, circus tents, silo liners, athletic field covers, outdoor shelters, welding curtains, strips, truck tarps, tarpaulins, etc. It creates a bond stronger than the vinyl itself. This fast drying solvent solution is easy to use, no clamping or pressure is needed during curing. It can even be used underwater to repair pool liners without draining. Note: Only part #1136 falls under the Transportation of Dangerous Goods Act.

Visit www.jennisfabrics.com

33


ADH

Adhesives

BU

Bulk

Plastiseam

1137 • Price Breaks: Each / 12 • Unit of measure: 12 oz./355 mL can • Seal seams, needle holes, repair worn areas on coated fabrics • Waterproof seams on most industrial nylons including tents, tarps, awnings, boat covers, rain gear, sport and duffel bags, outdoor furniture and cushions, sleeping bags, etc. Avoid use on upholstery type vinyls. The applicator/dauber is built into the cap. Fabric should be cleaned and dry before coating, ideally from the inside. A second coating 20 minutes later seals items. Allow to dry for several hours before folding. Stays flexible, prevents rotting and unraveling.

1164

HH-66 Vinyl Cement

• Price Breaks: Each / 12 • Unit of measure: 4 oz./118 mL • Upholstery Vinyl Cement • Specialist in PVC tarpaulin materials. Bonds expanded and non-expanded upholstery vinyls to themselves and other surfaces. This product features exceptional bond strength. Brushes smoothly (brush top cans on 8 oz./237 mL and 1 quart/1.13 L containers) and dries fast, ready in minutes. Waterproof, good resistance to weather and temperature extremes, chemicals, oils, fuels, and grease. Can be used for fabricating, repairing, sealing stitches seams, etc. Remains flexible. A superior quality vinyl adhesive that really works.

34

HH-66 Vinyl Cement

HH-66 Vinyl Cement

HH-66 Vinyl Cement

HH-66 Vinyl Cement

1166

1167

1168orer cilisi

1169

• Price Breaks: Each / 12

• Price Breaks: Each / 12

• Price Breaks: Each / 6

• Price Breaks: Each

• Unit of measure: 8 oz./237 mL can

• Unit of measure: 1 quart/1.13 L can

• Unit of measure: 1 gallon/3.8 L can

• Unit of measure: 5 gallons/18.9 L can

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


Pro 90 Glue Gun

TOO

Tools

MI

Miscellaneous

1151

• Price Breaks: Each • Unit of measure: Each • Industrial Hot Melt Glue Gun • Start saving time and money now with the affordable and reliable AD TECH Pro 90. Plug it in, allow a 5 minute warm up and then you can leave it on all day, ready to use in an instant. Sensitive triggering allows as much variation of glue volume and bead size as needed, and the lightweight unit eliminates hand fatigue. The translucent round glue sticks dry transparent for invisible glue lines. This trim and efficient unit is economically priced and will deliver up to 2.2lbs per hour of glue in continuous use. Operating temperature is 205°C (400°F).

Hot Glue Gun Tips When hot-gluing large areas that cause some of the glue to set before bonding, it is sometimes possible to pre-heat the surface with a heat gun before applying the glue, thus getting a longer tack time from your adhesive. Of course, good judgement must be used to ensure the preheating causes no damage to materials. Note: Never use a hot air heat gun to speed drying of an adhesive. Many adhesives are based on flammable volatiles. Because of the high speed of bonding that hot glue sticks have, it is often practical to use a hot melt glue gun to position pieces for more secure bonding with nails, screws or bolts.

10” Adhesive Sticks (Hot Melt)

ADH

Adhesives

MI

Miscellaneous

1153

• Price Breaks: 1 lb. / 5 lbs. / 22 lbs. • Unit of measure: Pound (approximately 20 sticks) • The Stick that Sticks • ½” (1.3 cm) round translucent glue sticks. 10” (25.4 cm) length for use in the Pro 90 glue gun listed above. Achieves 90% of ultimate strength within one minute. Clamping is generally not required.. Sold by the pound. Will work with any glue gun that accepts ½” (1.3 cm) round glue sticks.

Visit www.jennisfabrics.com

35


TOO

Tools

MI

Miscellaneous 118 Spray Gun

1158 • Price Breaks: Each • Unit of measure: Each • Low pressure adhesive spray gun • The 118 spray gun is a blow-over siphon type and produces a cone shaped spray. Adjustment of volume is made by screwing the fluid nozzle up into the air stream until the right flow is obtained. Due to its simplicity and ease of cleaning, it is particularly recommended for glues and other sticky liquids that tend to gum up painting equipment. With stainless steel tube and glass jar it can accommodate adhesives that degrade aluminum equipment. Also usable for touch up work and ideal for production painting of small articles. Light weight and easy to use. Shipping weight of 2 lbs. (0.9 kg).

Proper Alignment

118 Spray Gun Ideal for use with the following adhesives: 478 Foam Adhesive 1123 (requires stainless steel tube) EC 2218 (#5) Adhesive 1128 (requires stainless steel tube) JEF 2000 1145 (uses standard aluminum tube)

Air Nozzle

JEF 3000 1147 (uses standard aluminum tube)

Fluid Nozzle

Stainless Steel Repair Kit for 118 Gun 1163

Increase application rate by raising fluid nozzle into airflow

• Price Breaks: Each • Unit of measure: Each • Convert to stainless • Kit contains all the parts needed for repairing or rebuilding the 118 gun in stainless steel which allows the use of any adhesive. Kit includes replacement gasket, tube, nozzle, spring and locknut. Some parts are also available separately. See page 37.

36

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


Jar for 118 Gun: Glass 1159

Tube for 118 Gun: Aluminum 1160

TOO

Tools

MI

Miscellaneous

Fluid Nozzle for 118 Gun 1161olorer cilisi

Tube for 118 Gun: Stainless Steel 1162

• Price Breaks: Each / 12

• Price Breaks: Each

• Price Breaks: Each

• Price Breaks: Each

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

EZE Spray Gun

1165

• Price Breaks: Each • Unit of measure: Each • Light weight & Economical Adhesive Sprayer • EZE Spray Gun is a lightweight, durable alternative to more expensive sprayers. Blowover siphon action keeps parts to a minimum and cleaning simplicity to a maximum. Tube height is adjustable by loosening the adjustment nut and then sliding tube to achieve desire spray density. Easy to clean: loosen the adjustment nut and slide the vacuum tube completely out. Dip tube in solvent to blow out with spray gun. Plastic glue pot.

Visit www.jennisfabrics.com

37


AER

Aerosols

Application Chart

Aerosols & Protectants Applications Chart As a guide to preparation, cleaning and protecting, we have provided the following chart as a quick reference. The products listed are the manufacturers recommendations. See the full product description on the page indicated for more information.

Color Change

Preparation

Note: Some of the products perform more than one function, i.e. clean, polish and protect. Surface

Recommended Product

Part #

Page

Upholstery and Trim Vinyls Hard and Semi-hard Plastics Unsandable Metal/Fiberglass Unsandable Textured Surfaces Wood Cloudy/Whitened Wood Finishes Fabric Edges

Vinyl Prep Sand Free Sand Free Sand Free Sanding Sealer Blush Eraser No Fray Spray

9646 9648 9648 9648 7162 7174 7190

39 39 39 39 49 49 43

Cooley Brite™ Wood Upholstery Vinyls, Leather Auto Trim Carpet Sections Hard and Semi-hard Plastics Paintable Silicone

Cooley Magic Behlen Spray Stains Vinyl Coat Vinyl Coat Vinyl Coat Grip Slip Paintable Silicone

2770 7182

48 48 40 40 40 46

Protectants Cooley Magic 303 High Tech Fabric Guard (UV) T202 Tempotest Spray Teflon Vinyl Coat Clear 303 Protectant (UV) 303 High Tech Fabric Guard (UV) Scotchgard Fabri Gard 303 High Tech Fabric Guard (UV) Canvak 303 High Tech Fabric Guard (UV) Metal Polish Aquatite Green Iosso Repellent Metal Polish

2770 7300 7169 7300 7157 7177 7167 7300 7199 7300 7109 7166 7103 7109

48 41 43 40 41 42 41 42 42 43 42 105 44 46 105

Iosso Plastiseam

7106 1137

45 34

Protectant

Backlite Awnings (Cooley Brite™)* Awnings (Sunbrella® Acrylic) Awnings (Tempotest®) Color Coated Vinyls Vinyls, Hard and Semi-hard Plastics Upholstery Fabrics (most) Canvas Canvas Carpet Fiberglass Multiuse Painted Surfaces In addition to the protectants listed above:

*Please note: 303 High Tech Fabric Guard is NOT recommended for backlit awnings.

38

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


Vinyl Prep

AER

Aerosols

CL

Cleaners

9646

• Price Breaks: Each / 12 • Unit of measure: 15.5 oz./439 g aerosol can • For the best adhesion & coverage of Color Coat vinyl sprays • Ensure full adhesion of the Color Coat line of vinyls sprays and colors with this high strength formulation of cleaners and solvents. This product thoroughly cleans the vinyl surface of all traces of wax and grease (even new vinyl has waxes on the surface), and also creates a slight softening of the vinyl film to ensure that the Color Coat gets a good “tooth”. Rinse with water and allow to dry. Strongly recommended for best results with Color Coats. See can for full instructions.

Sand Free

9648

• Price Breaks: Each / 12 • Unit of measure: 13 oz./369 g aerosol can • Get solid adhesion to plastics and unreachable areas • Sand Free is a combination of rich solvents blended together to promote adhesion on plastic parts such as the interior trim pieces on automobiles. It also eliminates sanding on hard to reach areas such as door jams, under hoods, trunk, etc. This alone can save hours of time. For best results, wash area first with soap and water. Then apply Sand Free directly to the surface to be painted to open the pores of the plastic or old finish. Apply first coat of Color Coat or paint while Sand Free is still wet. The first coat should be a light “dry” coat, a heavy application will cause runs or sags. After the first coat of the new finish is dry, follow normal painting procedures. Do not allow Sand Free to dry completely before application of top coats. If the Sand Free has completely evaporated, the pores of the substrate will be closed which will result in a loss of adhesion.

Iosso® E-Z Snap® Lubricant

7108

• Price Breaks: Each / 24 • Unit of measure: 1.5 oz./42.5 g tube • E-Z-Snap lubricates, waterproofs, protects and reduces friction on snaps, zippers, hinges and hardware. This is a non-staining, non-solvent, non-silicone, non-toxic formula. 1.5 oz. tube of easy to place gel, will not run. • Place one drop in the head of the snap, then close and open it a few times. Place a few drops down the center of a zipper. Work the zipper a few times to distribute the lubricant. If removal is necessary, use the Safe-T-Solve (#7113), and wash as usual.

Visit www.jennisfabrics.com

39


AER

Aerosols

VI

Vinyl Coat Vinyl Coats

• Price Breaks: Each / 12 • Unit of measure: 13 oz./369 g aerosol can • SEM Color Coat: Change or Renew Vinyl Colors • SEM Color Coat is solvent based, elastomeric product formulated for coating the following substrates: vinyl upholstery and tops, flexible and rigid plastics, leather, carpet and velour. Designed for aerosol application to renew or change the color of any vinyl since it is a coating, not a dye. Also formulated to refinish flexible plastics such as dashes, consoles, kick pads, and most semi-rigid and rigid plastics in conjunction with the Sand Free plastic preparation product (page 17). Both high gloss and low luster Clear coats finish the system for a long lasting, durable finish. Available in a wide variety of factory colors plus a wide selection of matching automotive/bus colors to intermix virtually all automotive industry interior and exterior vinyl and plastic colors. Ask your sales professional for the SEM color card for shade samples. • Note: for best results use Vinyl Prep or Sand Free to prepare the surface prior to color coating.

9597 9599 9600 9601 9604 9606 9610 9611 9614 9616 9622

Gloss Black Satin Black 01 Landau Black 36 Portola Red 06 Burgundy 09 Light Buckskin 10 Super White 11 Firethorn Red 17 Camel 18 Warm Grey 00 Phantom White

Vinyl Coat Clear

Silver Metallic 16 Presidio 25 Titan Metallic 27 Napa Red 31 White 30 Graphite 60 Sailcloth White 64 Pacific Blue 12 Santa Fe 39 Medium Grey 45 Gloss White

9636 9640 9658 9662 9663 9668 9673 9678 9680 9682 9689

• Price Breaks: Each / 12 • Unit of measure: 13 oz./369 g aerosol can • To seal and finish the job: Clear Coatings for vinyls. Glossy, Satin or Matte finishes. • Preserve and protect the newly applied color and get the lustre you need to finish or match the job with one of the three clear coatings listed here. An important part of the overall process of changing or renewing vinyl color. Get better and longer lasting results with the total system.

Low Lustre High Gloss 01 Satin Gloss 40

9654 9656 9679

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


AER

Aerosols

PR

Protectants

303 Protectant

303 Protectant

303 Protectant

303 Protectant

7300

7302

7303lorer cilisi

7304

• Price Breaks: Each / 24

• Price Breaks: Each / 6

• Price Breaks: Each / 12

• Price Breaks: Each

• Unit of measure: 8 oz./237 mL spray bottle

• Unit of measure: 32 oz./946 mL bottle

• Unit of measure: 16 oz./473 mL pump bottle

• Unit of measure: 1 gallon/3.8 L bottle

Renew Vinyls, Rubber, Plastics, Leather & Fiberglass 303 Protectant bonds deep into surface fibres to renew, beautify and preserve these materials. Restores luster and sheen to surfaces faded by sun and weathering. It contains ultraviolet screening ingredients to provide maximum protection against fading, drying, hardening and cracking due to sunlight, oxidizing gases and ozone. Unlike other products, it contains no petroleum distillates, plasticizers or silicone oils that can weaken materials or leave greasy residues. 303 is water repellent and detergent resistant. Pre-cleaning is not required. Simply spray on and wipe surface with a clean, soft, dry cloth.

Scotchgard™

7177

• Price Breaks: Each / 12 • Unit of measure: 14 oz./283 g aerosol can • World famous protectant from 3M™ • Scotchgard™ is the easy way to use odor free protectant that causes spills and liquids to blot up before they can turns into stains. 100% free of CFC’s and ozone depleting chemicals, it will not change the look, feel or breathability of fabric. Versatile, invisible protection for new or freshly cleaned upholstery. Special new formula for furniture fabrics covers 1.5 - 2.6 m2 (16 - 28 square feet) of heavy weight fabrics and 2.8 - 4.6 m2 (30 - 40 square feet) of light weight fabrics per can. Some shiny surface fabrics such as nylon may require lighter applications. Use on natural and synthetic fibres. Not recommended for silk, wool, velvet, leather, vinyl, suede or carpets. Use Fabri Gard (page 42) for water and stain repellency on clothing, carpets, suede, velvets and leathers.

Visit www.jennisfabrics.com

41


AER

Aerosols

PR

Protectants Fabri Gard

Fabri Gard

Fabri Gard

7167

7170

7176lorer cilisi

• Price Breaks: Each / 12

• Price Breaks: Each

• Price Breaks: Each

• Unit of measure: 10.5 oz./300 g can

• Unit of measure: 3.5 quarts/4 L can

• Unit of measure: 17.5 quarts/20 L pail

Wide Range Water/Stain Protection Fabri Gard is a stain and water repellent product. Uses include rain wear, clothing, canvas, shoes, cushions, tablecloths, upholstered furniture, automobile seat and trim, carpeting, suede, velvet and leather. Fabri Gard penetrates the material, surrounds the fibres, protecting from staining, liquid, smoke and clinging odors. Spray overlapping sweeps 15 - 20 cm (6 - 8”) from fabric, let dry overnight. Test for water beading with a few drops. If water soaks in, reapply Fabri Gard. Coverage depends on the weight and absorbency of material being treated.

Ultra Fabric Protector with UV Inhibitors: The Sunbrella® Specialist The professional strength, ready to use formula for fabrics and carpeting exposed to the sun. World’s most powerful and longest lasting fabric protector. Lasts up to 3 years. Protects new and cleaned fabric from water, dirt and grease to keep indoor and outdoor fabrics looking new. Double strength UV sunscreen for maximum fade protection. Sunbrella® manufacturer recommends this fluorocarbon treatment for reproofing over silicone base products. Will not change feel, color, or breathability of the fabric. Non-toxic and odorless when dry. One can will protect up to 4.65 m2 (50 square feet) of lightweight fabric. Not recommended for plastic, vinyl, fiberglass or imitation suede. See 303 Protectant on page 19 for protecting these materials. Note: This product is endorsed by Glen Raven for Sunbrella®.

303 High Tech Fabric Guard

7157 • Price Breaks: Each / 12 • Unit of measure: 15.2 oz./430 g bottle

303 High Tech Fabric Guard

7158

• Price Breaks: Each • Unit of measure: 1 gallon/4.5 L bottle

42

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


AER

Aerosols

PR

Protectants

7169

T202 Tempotest Spray Teflon • Price Breaks: Each / 24 • Unit of measure: 13.5 oz./400 mL can • T202- Teflon spray for Tempotest® fabrics.

• Teflon, made by DuPont, makes fabrics water, oil, and stain repellent. T202 has been created by Parà to re-establish the total water repellency on Tempotest® fabrics after many years use or to make seams waterproof as seams are frequently treacherous points for water leaking.

No Fray Spray

7190

• Price Breaks: Each / 12 • Unit of measure 10.5 oz./298 g aerosol can • Serger in a Can • This unique product prevents unraveling of fabrics, thread slippage, reduces seam failure and eliminates over-edge stitching. Just spray the edges of the material prior to fraying. The top and bottom layer in bundles should be covered with paper to protects against overspray, or mask edge with a piece of cardboard as you go along, spraying evenly 6 - 8” (15 - 20 cm) from the edge. Testing is recommended before large scale operation.

Canvak® Canvas Preservative 7199 • Price Breaks: Each / 6 • Unit of measure: 1 gallon/4.5 L can • A heavy duty, water-resistant finish for tents, tarpaulins and covers manufactured with canvas. It contains fungicides for mildew resistance. Canvak® canvas preservative is a clear wax-based compound that can be used for re-waterproofing heavy duty textiles. It does not leave a residual, tacky, or greasy feeling. Use it on rental tents and covers for an economical retreating.

Visit www.jennisfabrics.com

43


AER

Aerosols

PR

Protectants Aqua-Tite® Green Water Repellent 7166 • Price Breaks: Each / 12 • Unit of measure: 32 oz./946 mL bottle

Aqua-Tite® Green Water Repellent 7165 • Price Breaks: Each / 6 • Unit of measure: 1 gallon/3.8 L bottle

Aqua-Tite® Green Water Repellent Aqua-Tite® is a premium grade dual-action water and stain repellent. Eco-friendly green and clean technology product. Lower levels of VOC’S (Volatile Organic Compounds) than current regulations. Use on awnings, boat covers, canvas, tarpaulins, outdoor furnishings, and any synthetic or natural fibre fabric. New Eco Friendly Aqua-Tite Green Water Repellant Treatment is easy to use. One gallon of this waterproofing solution covers 500 to 700 square feet, depending on absorbency of fabric. For waterproofing on fabrics made of acrylic, cotton, nylon, polyporpylene, polyester and cotton blends. Ideal for boat covers, awnings, sporting goods equipment, canvas and leather footware. Aqua-Tite Green is a premium grade product which imparts a unique combination of water and stain repellant. Water drops just “bead and roll off” Aqua-Tite treated products. Provide outstanding protection against aqueous based stains such as soda and grape juice. Fabrics treated with Aqua-Tite Green resist dirt and oil-based stains such as animal droppings, motor oil, and lubricants. Enhances the tone of the fabric. Very good durability to outdoor weathering. Aqua-Tite Green contains no mineral spirits or petroleum distillates. Contains isopropanol.

44

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


Iosso® Seam Sealer

AER

Aerosols

PR

Protectants

7106

• Price Breaks: Each / 12 • Unit of measure: 4 oz./113 g bottle

Iosso® Seam Sealer

7107

• Price Breaks: Each • Unit of measure: 1 gallon/3.8 L pail

Iosso® Seam Sealer Ideal for boat covers, awnings, tents, backpacks and almost anything else where you need a water tight seam. Seam Sealer will not change the look or feel of your fabric. For best results use with cotton, cotton blends, polyester and synthetic woven fabrics. While Seam Sealer may be used on vinyl coated or laminated fabrics, the water repellency will vary.

Iosso® Water Repellent

Iosso® Water Repellent is effective on all fabrics. It protects fabric from water, soils, oils, bird droppings, and environmental pollutants. It resists mildew and stains and increases weatherability. It won’t change the color, feel or breathability of the fabric. Recommended for use on awnings, canopies, tents, patio furniture cushions, umbrellas, spa covers, tarps, boat covers, bimini tops, hunting fabrics, camping gear, leather, synthetics and vinyls. Solution is ready to use or concentrated. Non-solvent, non silicon formula.

Iosso® Water Repellent 7103

Iosso® Water Repellent Ready to Use 7104

Iosso® Water Repellent Concentrate 7105rer cilisi

• Price Breaks: Each / 6

• Price Breaks: Each

• Price Breaks: Each

• Unit of measure: 22 oz./650 mL bottle

• Unit of measure: 1 gallon/3.9 L bottle

• Unit of measure: 1 gallon/3.9 L bottle

• Ready to use

• Concentrate

Visit www.jennisfabrics.com

45


AER

Aerosols

SI

Silicones Grip Slip Paintable Silicone

7182 • Price Breaks: Each / 12 • Unit of measure: 14 oz./400 g aerosol can • Grip-slip paintable silicone lubricant • A multipurpose lubricant and form release that will not interfere with post finishing operations. Maintain adequate ventilation in work area. Store in a cool dry place away from excess heat.

JEF Spray Silicone

7175 • Price Breaks: Each / 12 / 60 • Unit of measure: 14 oz./400 g aerosol can • Economical all purpose lubricant • JEF Spray Silicone stops squeaking, sticking, binding and retards corrosion. Use on any surface: metal, glass, rubber, plastic, painted finishes and fabrics. Non staining, non-toxic. Can be used on food products equipment, sewing equipment, cutting equipment and sewing tables to reduce drag. Helps fight rust on dies, rubber molds, and precision equipment. Can be used to ease cover placement on foam cushions. Hundreds of applications.

46

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


Super Slip Silcone

AER

Aerosols

SI

Silicones

7171

• Price Breaks: Each / 12 • Unit of measure: 14 oz./400 g aerosol can

Super Slip Silcone

7172

• Price Breaks: Each / 4 • Unit of measure: 3.5 quart/4 L can

Super Slip Silcone 7173 • Price Breaks: Each / 12 • Unit of measure: 17.5 quart/20 L can

Super Slip Silcone Super Slip Silicone is a widely used lubricant for sewing, cushion stuffing and cutting tables. Use on foams and paddings, inside covers for ease of placing cushions, on needles, feed plates and table surfaces. For blades, tables and dies for cutting. Invisible product leaves no trace on fabrics. Also invaluable as a general lubricant for joints, hinges, sliders, blades, etc. Can be used to waterproof electronics and ignition systems on automobiles. Anywhere friction is causing problems, silicone can be used to reduce it.

Visit www.jennisfabrics.com

47


AER

Aerosols

MI

Miscellaneous Cooley Magic

2770 • Price Breaks: Each / 4 • Unit of measure: 1 gallon/3.8 L jug • Liquid Eradicant for use with Cooley Brite™ and Eradilite® Awning material • Part of the Cooley Brite™ signage system for awnings. This liquid will remove the coloring of Cooley Brite™ material, leaving behind a pure white substrate allowing you to create designs, logos and lettering on the material. Place the precut stencil of your graphic design over the Cooley Brite™ flexible material, making sure of a good adhesive bond and smoothing out any bubbles. Once you are satisfied the mask is correctly and solidly placed, use a soft, white cloth lightly saturated in Cooley Magic to carefully wipe the area exposed until all color is removed. Gently peel the mask off the material. You will see a bold, white graphic image with extremely clear definition and contrast, designed to last for years to come.

AER

Aerosols

ST

Stains

Behlen Spray Stain

• Price Breaks: Each / 12 • Unit of measure: 13 oz./369 g aerosol can • Behlen Spray Stains • Specially formulated for a professional finish. Unfinished and finished wooden arms, legs, scuffed and rubbed through areas can be finished or refinished with ease. This product is economical, easily applied and dries quickly. Use on hard to stain surfaces: shutters, louvers, furniture legs, picture frames, moldings, turnings, rough cut wood, wicker, rattan and other interior woods. Use to re-stain previously stained and finished wood, for shading toning and touch ups. Rich, deep colors without messy clean up.

Dark American Walnut Extra Dark Walnut Dark Mahogany Medium Brown Walnut Medium Mahogany Brown Mahogany Cherry

7178 7179 7180 7181 7183 7185 7188

Flat Black Gloss Black Burnt Amber Satin Black Gloss White Raw Umber Red Mahogany

• To Seal & Finish Wood Stains

Clear Gloss Clear Stain Clear Flat

48

7160 7161 7184

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS

7189 7191 7193 7194 7195 7197 7221


Sanding Sealer

AER

Aerosols

ST

Stains

7162

• Price Breaks: Each / 12 • Unit of measure: 13 oz./369 g can • Versatile furniture touch-up product • One of the most versatile products used in furniture touch-ups. Fills in and levels surface scratches, burn-in repairs and smooths “french padded” repairs. Fast drying, easy sanding, high solids for rapid build up. Seals in stains prior to final top coat of finish for faster build up.

Blush Eraser

7174

• Price Breaks: Each / 12 • Unit of measure 13 oz./369 g aerosol can • Repair cloudy/whitened finishes • Humid or cold weather can cause a finish to turn white or “blush”. This aerosol spray will eliminate the “blushing” without changing the existing sheen of the lacquer top coat. Blush Eraser reflows the lacquer and allows the trapped moisture to escape. No need to sand off or chemically strip the damaged finish. Spray over the blushing finish and watch the white fade away. Part of the Behlen Jet Spray system.

Visit www.jennisfabrics.com

49


BAG

Bag Hardware

Properties

Properties of Materials used for Buckles, Fittings Steel: An alloy created by the addition of a small percentage (<2%) of carbon to iron. This tiny amount of carbon adds great strength and hardness. Steel conducts electricity and is magnetic. It is prone to rusting (oxidation) if not coated with other metals. Stainless Steel: One of a family of alloyed steels containing 10 - 30% chromium and other metals. When used with low carbon content, chromium imparts remarkable resistance to corrosion and heat. Often other elements such as nickel are added to increase resistance to oxidation. Stainless steel in fittings should be passive or coated to prevent active oxidation. When this coating is scratched, the stainless steel will react with oxygen to allow oxidation to occur. This is a â&#x20AC;&#x153;re-sealingâ&#x20AC;? action. Nickel: A strong and corrosive resistant metal. Nickel is magnetic and can be polished to a brilliant sheen. Used widely for plating and in the manufacturing of stainless steel. Titanium is the only other alloy better in galvanic corrosion (seawater) resistance. Chromium: Hard, steel grey metal that can be polished to a bright sheen. Component of stainless steel due to its excellent anticorrosion characteristics. It is magnetic and also used as a corrosion resistant coating. Brass: An alloy created from copper and zinc. It will not rust in water although the zinc alloy will eventually oxidize and is non magnetic once the zinc has oxidized, the remaining copper may become soft over time. Zinc: A metal of only moderate hardness, used with copper to create brass. The main application of zinc is as a coating for the protection of steel against corrosion. Zinc itself forms an impervious coating on exposure to the atmospheres and therefore corrodes at a much lower rate than iron. In addition, because zinc tends to oxidize in presence of iron, some protection is afforded the steel surface even if some of it is exposed through cracks. It is intended to oxidized to give protection in stainless steel. Electroplating of zinc to iron is called galvanizing. Aluminum: Weighs about 1/3 of an equal volume of steel. It is non-magnetic, corrosion resistant in freshwater, an excellent conductor of heat and electricity, reflects both light and heat and is easily formed. If not properly anodized, aluminum will oxidize with saltwater exposure. Delrin (nylon): An acetal resin compound widely referred to as a nylon or plastic. Delrin is cast into high impact, water impervious forms. Excellent corrosion resistance and when used in zippers, provides a degree of self lubrication. Finish is normally cast in and will not require polishing or wear off. Delrin (nylon) is unaffected by sea or freshwater, however, in ultimate strength it is not as strong as metals and is subject to UV ray deterioration over long periods of time. It is well suited to most applications where strength is not the critical factor, such as garments, bags and marine fittings for use in sporting applications. Casting: The process of pouring molten metals or plastics into dies and allowing them to harden. Die casting involves injecting the molten material under pressure and allows much greater precision. Corrosion: a) Galvanic Corrosion: The reduction of an alloy by chemical reaction with local electrolyte, in most cases saltwater (and to much lesser degree, freshwater). Any time two different metals are submerged in an electrolyte, one will act as an anode, the other as a cathode: the anode (less noble) metal will be attacked and gradually destroyed; deposits of its components may appear in the cathode (more noble) metal. b) Oxidation or Rust: The removal of metallic elements resulting in stable compounds such as iron oxide (rust). Corrosion compounds form on the surface of a solid material. If the compounds are hard and impenetrable (such as those in zinc) the progress of the corrosion is arrested. If the compound is loose and porous, such as iron, corrosion proceeds swiftly and continuously. Metal Plating: The process of applying a metallic coating to another material. Normally used to enhance corrosion resistance or appearance. Nickel plating is one of the most common; when combined with an underlayer of chromium, it provides a bright shiny surface that is corrosion free and resistant to wear. It is used over steel, brass, zinc and aluminum, as well as some kinds of chemically metallized plastic. Nickel plating conducts electricity, is long lasting, very hard and corrosion resistant. Summary: Metals:

50

- Steel and stainless steels are the hardest metals, followed by nickel.

- Zinc and brass are both of moderate strengths

- Aluminum is among the softer metals but is normally alloyed with other metals to add strength

- Delrin (nylon) ranks beneath the metals in ultimate tensile strength. However, it has the best corrosion resistance and is only affected by UV rays and strong acids

Platings:

- Nickel is the hardest and most corrosion resistant; can be polished to a higher degree

- Chrome plating is also very hard and resistant; can be polished to a higher degree

- Brass plating is of moderate hardness

- Anodized aluminum is among the least hard coatings

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


BAG

Bag Hardware

Properties

Properties of Materials used for Buckles, Fittings (continued) Relative Break Strengths When manufacturing a harness or structure with webbing and fittings, there will always be a weak link, the break point of the design. This weak link can be anything from a seam or fitting to the webbing. As metal corrodes and thread deteriorates due to the exposure or friction the manufactured product develops more weak links. The design can also affect strength. Construction and use of fittings, buckles and webbings will aid or hinder the strength of the design. welded joints are stronger than non-welded joints. Comparison of Break Strength between different items:

Part Number

Description

Breaking Strength kg. lb.

BAGHO6800 FITHO7700 BAGLO2271 BAGSL2285 BAGSL2292 BAGTR2305 BAGSL2280 BAGDR2260 BAGHO2238 BAGHO2245 BAGDR3901 BAGDR3904

1” Snap Hook: NP Steel 1” Snap Hook: NP Brass 1” Snap Hook: NP Delrin 1” Slide: Delrin 1” Wide Mouth Slide: Delrin 1” Triangle: Delrin 1” Strap Lock Buckle: Delrin 1” D-Ring: Delrin 1” Pre-assembled Snap Hook: Delrin 1” Universal Snap Hook: Delrin 1” D-ring Welded: Steel 1” Heavy D-ring Welded: Steel

70 65 45 40 50 45 55 50 45 35 250 380

154 143 89 88 110 99 121 110 99 77 551 838

Comparison of Break Strength between different sizes: Note: These are generic D-rings and Strap Locks, only use them as a comparison of how the break strength does not go up proportionately to the size. D-rings

Strap Locks

Size

Description

Breaking Strength kg. lb.

Size

Description

Breaking Strength kg. lb.

1.0” 1.5” 2.0”

D-ring D-ring D-ring

45 50 55

1.0” 1.5” 2.0”

Strap Lock Buckle Strap Lock Buckle Strap Lock Buckle

50 55 150

99 110 121

110 121 330

Important Note: All numbers provided in this comparison were provided by the manufacturer. They are not common to any specification. J. Ennis Fabrics is not responsible for variances in the manufacturing process or materials.

Visit www.jennisfabrics.com

51


BAG

Bag Hardware

BU

Buckles

Lockable Hot Tub Buckle (Delrin) 2206 • Price Breaks: Each / 25 / 100 • Unit of measure: Each

Key for Hot Tub Buckle

2205

• Price Breaks: Each / 25 / 100 • Unit of measure: Each • A separate key is not necessary for each hot tub lock as any key will work with any lock. Part #2206 and 2205 work together but are sold separately.

Black (Delrin) Buckles All of our nylon hardware is of tough, weather resistant delrin (nylon). Waterproof, long lasting and versatile. All dimensions refer to the size of webbing that fits cleanly through the opening on the fitting for the attaching to your product. Unless otherwise stated, the delrin (nylon) hardware is black.

1½” Dual Adjustable Side Release Buckle 2225

2” Dual Adjustable Side Release Buckle 2226

• Price Breaks: Each / 25 / 100 • Unit of measure: Each • Content: (nylon) • Thumb and finger release buckle. Both ends are adjustable. Break strength for #2225 ≈ 143lbs. (65 kg) and #2226 ≈ 165lbs. (75 kg).

52

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


¾” Side Release Buckle 2229

1” Side Release Buckle 2230

1½” Side Release Buckle 2235lorer cilisi

BAG

Bag Hardware

BU

Buckles 2” Side Release Buckle 2240

• Price Breaks: Each / 25 / 100 • Unit of measure: Each • Content: Delrin (nylon) • Thumb and finger release buckle. One end is sewn and fixed, the other end it threaded and adjustable. Break strengths are: #2229 ≈ 88lbs. (40 kg), #2230 ≈ 121lbs. (55 kg), #2235 ≈ 143lbs. (65 kg), #2240 ≈ 165lbs. (75 kg).

1” Contoured Buckle

2202

• Price Breaks: Each / 25 / 100 • Unit of measure: Each • Content: Delrin (nylon) • Thumb and finger release buckle with sleek, contoured edging and corners. One end is sewn and fixed, the other end is threaded and adjustable. Break strength ≈ 121lbs. (55 kg).

1” Detail Buckle

2201

• Price Breaks: Each / 25 / 100 • Unit of measure: Each • Content: Delrin (nylon) • Curved thumb and finger release with raised detailing on top. One end is sewn and fixed, the other end is threaded and adjustable. Break strength ≈ 176lbs. (80 kg).

Visit www.jennisfabrics.com

53


BAG

Bag Hardware

BU

Buckles

¾” Low Profile Centre Release 2248

• Price Breaks: Each / 25 / 100 • Unit of measure: Each • Content: Delrin (nylon) • Smooth, low profile, one finger centre release buckle. One end is fixed and the other end is threaded and adjustable.

1” Cam Release Buckle

2232

1½” Cam Release Buckle

2233

• Price Breaks: Each / 25 / 100 • Unit of measure: Each • Content: Delrin (nylon) • Easy adjustment through cam action. One end fixed, the other locked by the cam.

2” Heavy Duty Cam Buckle

2236 • Price Breaks: Each / 25 / 100 • Unit of measure: Each • Content: Delrin (nylon) • Extra heavy duty cam action buckle for use with wider webbing. 2” (5.1 cm) webbing tends to be used in heavier applications and should have a heavier buckle. Firm positive lock with toothed cam lobe.

54

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


1” White Side Release Buckle White 2228

BAG

Bag Hardware

BU

Buckles

• Price Breaks: Each / 25 / 100 • Unit of measure: Each • Content: Delrin (nylon) • Thumb and finger release buckle. One end fixed, the other threaded and adjustable. Break strength ≈ 121lbs. (55 kg).

Metal Buckles All metal buckles for heavy duty applications. Content and plating will vary; consult individual details to ensure correct applications. Brass, zinc and nickel are preferred for moisture exposure, they will not rust. Steel is the best for ultimate strength. If unsure about what your best choice would be, consult your sales representative or our Customer Service Centre for assistance.

1½” Web Strap Buckle 2221

2” Web Strap Buckle

2222

• Price Breaks: Each / 25 / 100 • Unit of measure: Each • Content: Nickel plated steel • Curved thumb and finger release buckle. One end is sewn and fixed, the other end is threaded and adjustable. Perfect for rounded surfaces or corner locations. Break strength ≈ 121lbs. (55 kg).

Visit www.jennisfabrics.com

55


BAG

Bag Hardware

BU

Buckles 2227

1” Steel Webbing Buckle

• Price Breaks: Each / 10 • Unit of measure: Each • Content: Steel • Thumb grip release buckle. One end fixed by sewing, the other adjustable through serrated spring loaded thumb grip.

1” Steel Webbing Buckle Black

2224 • Price Breaks: Each / 10 • Unit of measure: Each • Content: Steel • Thumb grip release buckle. One end fixed by sewing, the other adjustable through serrated spring loaded thumb grip. Same as #2227 in black.

1” Adjuster Buckle

2278 • Price Breaks: Each / 25 / 100 • Unit of measure: Each • Content: Nickel plated steel • Threaded type adjuster in nickel plated steel. Break strength ≈ 139lbs. (63 kg).

56

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


1” Double Bar Buckle

BAG

Bag Hardware

BU

Buckles

BAG

Bag Hardware

DR

D-Rings

2283

• Price Breaks: Each / 25 / 100 • Unit of measure: Each • Content: Nickel plated zinc • Double bar buckle in nickel plated zinc. Break strength ≈ 705lbs. (320 kg).

¾” D-Ring

1” D-Ring

1½” D-Ring

2” D-Ring

2259

2260

2265orer cilisi

2270

• Price Breaks: Each / 25 / 100 / 1000 • Unit of measure: Each • Content: Delrin (nylon) • Single D-ring for clipping into or double up to form adjuster. Break strength #2259 ≈ 88lbs. (40 kg), #2260 ≈ 99lbs. (45 kg), #2265 ≈ 110lbs. (50 kg), #2270 ≈ 121lbs. (55 kg).

Visit www.jennisfabrics.com

57


BAG

Bag Hardware

DR

D-Rings 2269

1½” Double D-Ring

• Price Breaks: Each / 25 / 100 / 1000 • Unit of measure: Each • Content: Delrin (nylon) • D-rings with built in loop for sewing. Break strength ≈ 110lbs. (50 kg).

1½” Snap D-Ring

2262 • Price Breaks: Each / 25 / 100 / 1000 • Unit of measure: Each • Content: Delrin (nylon) • D-ring with built in eyelet for clipping.

¾” Sewable D-Ring

2254 • Price Breaks: Each / 25 / 100 / 1000 • Unit of measure: Each • Content: Delrin (nylon) • D-ring with sewable tab for inserting into seams.

58

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


1” White D-Ring

BAG

Bag Hardware

DR

D-Rings

2253

• Price Breaks: Each / 25 / 100 / 1000 • Unit of measure: Each • Content: Delrin (nylon) • Single D-ring for clipping into or double up to form an adjuster. Break strength ≈ 110lbs. (50 kg).

¾” Nickel Plated Steel D-Ring 3890

1” Nickel Plated Steel D-Ring 3900

1½” Nickel Plated Steel D-Ring 3910rer cilisi

• Price Breaks: Each / 10 / 50 • Unit of measure: Each • Content: Nickel plated steel • Unwelded nickel plated steel D-rings

1” Welded D-Ring

3901

• Price Breaks: Package / 4 / 20 • Unit of measure: Package of 25 • Content: Nickel plated steel • Welded D-ring for greater strength, will not pull apart. Also available in heavy duty for high stress applications. Breaking strength ≈ 551lbs. (250 kg).

Visit www.jennisfabrics.com

59


BAG

Bag Hardware

DR

D-Rings 3902

1” Welded Stainless Steel D-Ring

• Price Breaks: Package / 4 / 20 • Unit of measure: Package of 25 • Content: Stainless steel • Stainless steel for those applications requiring strength and exposure resistance characteristics. Break strength ≈ 551lbs. (250 kg).

¾” Heavy Welded D-Ring 3903

1” Heavy Welded D-Ring 3904

1¼” Heavy Welded D-Ring 3905orer cilisi

1½” Heavy Welded D-Ring 3906

2” Heavy Welded D-Ring 3907

• Price Breaks: Each / 25 / 100 • Unit of measure: Each • Content: Nickel plated steel • D-rings in nickel plated steel with a welded seam. Will not pull apart under heavy stresses. Break strengths: #3903 ≈ 1056lbs. (480 kg), #3904 ≈ 1210lbs. (550 kg), #3905 ≈ 1430lbs. (650 kg), #3906 ≈ 1496lbs. (680 kg), #3907 ≈ 1870lbs. (850 kg).

1” Heavy D-Ring

3892 • Price Breaks: Each / 25 / 100 • Unit of measure: Each • Content: Brass plated steel • Heavy duty welded D-rings for high strength applications requiring a brass finish. Break strength ≈ 1210lbs. (550 kg).

60

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


BAG

Bag Hardware

OR

O-Rings

1½” Welded O-Ring Nickel Plated 2296 • Price Breaks: Each / 25 / 100 • Unit of measure: Each • Content: Nickel plated steel • Welded O-ring. Break strength ≈ 880lbs. (400 kg).

1½” Welded O-Ring Brass Plated 2297

• Price Breaks: Each / 25 / 100 • Unit of measure: Each • Content: Brass plated steel • Welded O-ring. Break strength ≈ 880lbs. (400 kg)

Visit www.jennisfabrics.com

61


BAG

Bag Hardware

HO

Hooks

¾” Preassembled Snap Hook 2237

1” Preassembled Snap Hook 2238

1½” Preassembled Snap Hook 2239orer cilisi

2” Preassembled Snap Hook 2241

• Price Breaks: Each / 25 / 100 • Unit of measure: Each • Content: Delrin (nylon) • Fully assembled snap hook. Break strengths: #2237 ≈ 99lbs. (45 kg), #2238 ≈ 99lbs. (45 kg), #2239 ≈ 110lbs. (50 kg), #2241 ≈ 121lbs. (55 kg).

1” White Preassembled Snap Hook

2251

• Price Breaks: Each / 25 / 100 • Unit of measure: Each • Content: Delrin (nylon) • Fully assembled snap hook in white. Break strength ≈ 99lbs. (45 kg).

#7 Snap Hook

2257 • Price Breaks: Each / 25 / 100 • Unit of measure: Each • Content: Delrin (nylon) • Universal pivoting hook with webbing or cord ring for attachment. Break strength ≈ 33lbs. (15 kg).

62

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


1½” Spring Snap Hook

BAG

Bag Hardware

HO

Hooks

2258

• Price Breaks: Each / 25 / 100 • Unit of measure: Each • Content: Delrin (nylon) • Spring loaded snap hook with pivot. Break strength ≈ 99lbs. (45 kg).

¾” Universal Snap Hook 2244

1” Universal Snap Hook 2245

1½” Universal Snap Hook 2250orer cilisi

2” Universal Snap Hook 2255

• Price Breaks: Each / 25 / 100 • Unit of measure: Each • Content: Delrin (nylon) • Universal snap hook pivots in two directions to accommodate angles. Break strengths: #2245 ≈ 77lbs. (35 kg), #2250 ≈ 88lbs. (40 kg), #2255 ≈ 88lbs. (40 kg).

¼” Shock Cord Hook

2723

/16” Shock Cord Hook 2724

5

• Price Breaks: Each / 25 / 100 • Unit of measure: Each • Content: Delrin (nylon) • 2 part hook for use with shock cord. Available in 2 sizes.

Visit www.jennisfabrics.com

63


BAG

Bag Hardware

HO

Hooks

Adjustable Shock Cord Hook 2722

• Price Breaks: Each / 25 / 100 • Unit of measure: Each • Content: Delrin (nylon) • Adjustable shock cord hook accepts cords of up to 5/16” (8 mm). Just pull through and snap into position to provide positive temporary locking.

¾” Nickel Plated Steel Snap Hook 6790

1” Nickel Plated Steel Snap Hook 6800

1½” Nickel Plated Steel Snap Hook 6810orer cilisi

2” Nickel Plated Steel Snap Hook 6820

• Price Breaks: Each / 4 / 20 • Unit of measure: Package of 25 • Content: Nickel plated steel • Quick release snap hooks in varying eye sizes.

1” Brass Plated Snap Hook

6822 • Price Breaks: Each / 4 / 20 • Unit of measure: Package of 25 • Content: Brass plated steel • Quick release snap hooks with a brass finish in varying eye sizes.

64

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


1” Heavy Spring Snap Hook

6799

BAG

Bag Hardware

HO

Hooks

2” Heavy Spring Snap Hook

6802

• Price Breaks: Each / 25 / 100 • Unit of measure: Each • Content: Nickel plated steel • ¾” (1.9 cm) and 1” (2.5 cm) eyes on heavy nickel plated steel snap hooks for extra strength.

¾” Heavy Snap Hook

6795

1” Heavy Snap Hook

6797

• Price Breaks: Each / 25 / 100 • Unit of measure: Each • Content: Nickel plated steel • ¾” (1.9 cm) and 1” (2.5 cm) eyes on heavy nickel plated steel snap hooks for extra strength.

¾” Brass Plated Heavy Snap Hook

6796

1” Brass Plated Heavy Snap Hook

6798

• Price Breaks: Each / 25 / 100 • Unit of measure: Each • Content: Brass plated steel • ¾” (1.9 cm) and 1” (2.5 cm) eyes on heavy brass plated steel snap hooks for extra strength.

Visit www.jennisfabrics.com

65


BAG

Bag Hardware

HO

Hooks

¾” Nickel Plated Bolt Snap

6803

1” Nickel Plated Bolt Snap 6805

• Price Breaks: Each / 25 / 100 • Unit of measure: Each • Content: Nickel plated steel • Bolt style closing. Spring loaded one hand operation. Break strength ≈ 598lbs. (272 kg).

1” Brass Plated Bolt Snap

6806 • Price Breaks: Each / 25 / 100 • Unit of measure: Each • Content: Brass plated steel • Spring loaded thumb bolt for positive closing and less chance of accidental opening. Break strength ≈ 598lbs. (272 kg).

¾” Spring Hook with Strap Eye

6788 • Price Breaks: Each / 4 / 20 • Unit of measure: Package of 100 • Content: Nickel plated steel • Commonly seen in use with D-rings on gloves but has many other applications.

66

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


FIT

Fittings

HO

Hooks

BAG

Bag Hardware

SL

Slides

1” Brass Nickel Snap Hook 7700 • Price Breaks: Each / 25 / 100 • Unit of measure: Each • Content: Nickel plated brass • Nickel plated brass snap hook for marine and other salt and moisture exposed applications. Break strength ≈ 143lbs. (65 kg).

¾” Slide

1” Slide

1½” Slide

2” Slide

2284

2285

2290orer cilisi

2295

• Price Breaks: Each / 25 / 100 / 1000 • Unit of measure: Each • Content: Delrin (nylon) • Slides for adjusting webbing. Break strengths: #2284 ≈ 30 kg (66lbs.), #2285 ≈ 88lbs. (40 kg), 2290 ≈ 110lbs. (50 kg), #2295 ≈ 143lbs. (65 kg).

Visit www.jennisfabrics.com

67


BAG

Bag Hardware

SL

Slides ¾” Straplock Buckle 2279

1” Straplock Buckle 2280

1½” Straplock Buckle 2282orer cilisi

• Price Breaks: Each / 25 / 100 • Unit of measure: Each • Content: Delrin (nylon) • Straplock slides for fixing and adjusting webbing. One end fixed by sewing, the other is adjustable through the locking bar. Just angle for release and pull to tighten. Break strengths: #2279 ≈ 99lbs. (45 kg), #2280 ≈ 110lbs. (55 kg), #2282 ≈ 154lbs. (70 kg).

2” Heavy Duty Strap Lock

2286 • Price Breaks: Each / 25 /100 • Unit of measure: Each • Content: Delrin (nylon) • Extra strength in a straplock slider for heavier use. One end fixed by sewing, the other is adjustable through the slider. Break strength ≈ 660lbs. (300 kg).

1” Dual Lock Strap Lock Buckle

2287 • Price Breaks: Each / 25 / 100 • Unit of measure: Each • Content: Delrin (nylon) • Slider for connecting and adjusting two free ends of webbing. Break strength ≈ 143lbs. (65 kg).

68

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


¾” Wide Mouth Slide Black

2291

BAG

Bag Hardware

SL

Slides

1” Wide Mouth Slide Black

2292

• Price Breaks: Each / 25 / 100 / 1000 • Unit of measure: Each • Content: Delrin (nylon) • Wide mouth slide for thicker and heavier webbing or multiple threading. Break strength: #2291 ≈ 88lbs. (40 kg), #2292 ≈ 110lbs. (50 kg).

1” White Slide

2294

• Price Breaks: Each / 25 / 100 / 1000 • Unit of measure: Each • Content: Delrin (nylon) • White delrin (nylon) slide for adjusting webbing. Break strength ≈ 88lbs. (40 kg).

Visit www.jennisfabrics.com

69


BAG

Bag Hardware

SL

Slides 1” Steel Web Slide 6825

1½” Steel Web Slide 6830

2” Steel Web Slide 6835orer cilisi

• Price Breaks: Each / 4 / 20 • Unit of measure: Package of 25 • Content: Nickel plated steel • Adjuster slides in nickel plated steel for higher strength.

2” Nickel Plated Heavy Web Slide

6840 • Price Breaks: Each / 25 / 100 • Unit of measure: Each • Content: Nickel plated steel • Extra heavy adjuster slides for high stress applications. Break strength ≈ 445lbs. (200 kg).

2” Brass Plated Heavy Web Slide

6837 • Price Breaks: Each / 25 / 100 • Unit of measure: Each • Content: Brass plated steel • Extra heavy adjuster slides in brass finish for high stress applications. Break strength ≈ 445lbs. (200 kg).

70

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


1½” Shoulder Pad

2302

BAG

Bag Hardware

PA

Pads

2” Shoulder Pad

2304

• Price Breaks: Each / 25 / 100 / 1000 • Unit of measure: Each • Content: Rubber • Rubber shoulder pads. Webbing widths from 1½” (3.8 cm) to 2” (5.1 cm) slide through to give professional finished appearance and add practicality to bags, totes and any strap meant to be carried.

1” Nickel Plated Adjuster Slide

FIT

Fittings

MI

Miscellaneous

2000

• Price Breaks: Each / 25 / 100 • Unit of measure: Each • Content: Nickel plated brass • Nickel plated brass adjuster slide for outdoor and marine applications. Will not rust of corrode.

Visit www.jennisfabrics.com

71


BAG

Bag Hardware

LO

Loops ¾” Loop

1” Loop

1½” Loop

2” Loop

2274

2275

2276orer cilisi

2277

• Price Breaks: Each / 25 / 100 / 1000 • Unit of measure: Each • Content: Delrin (nylon) • 2 way webbing connector fixed by stitching. Break strengths: #2274 ≈ 45 kg (99lbs.), #2275 ≈ 99lbs. (45 kg), 2276 ≈ 99lbs. (45 kg), #2277 ≈ 132lbs. (60 kg).

1” Snap Loop

2271 • Price Breaks: Each / 25 / 100 / 1000 • Unit of measure: Each • Content: Delrin (nylon) • Loop connector with eye for attaching snap hooks. Fixed by stitching onto webbing end. Break strength ≈ 99lbs. (45 kg).

Reducing Loop

2267 • Price Breaks: Each / 25 / 100 / 1000 • Unit of measure: Each • Content: Delrin (nylon) • Black Delrin (nylon) loop for connecting 1” (2.5 cm) and 2” (5.1 cm) webbing by stitching.

72

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


BAG

Bag Hardware

SU

Surcingles

2” Nickel Surcingle Hook and Clasp 6845 • Price Breaks: Each / 25 / 100 • Unit of measure: Each • Content: Nickel plated steel • Traditional equestrian hook and clasp fastener. Quick fitting and simple enough to join when wearing gloves. Twist to join or open. Nickel plated finish. Both parts included in one unit.

2” Brass Surcingle Hook and Clasp 6841 • Price Breaks: Each / 25 / 100 • Unit of measure: Each • Content: Brass plated steel • Same as above with brass plating. Both parts included in one unit.

Visit www.jennisfabrics.com

73


BAG

Bag Hardware

TR

Triangles 1” Nylon Triangle

2305

1½” Nylon Triangle

• Price Breaks: Each / 25 / 100 / 1000 • Unit of measure: Each • Content: Delrin (nylon) • 3 way sewn webbing connector in black delrin (nylon).

1” Plastic Rectangle

2320 • Price Breaks: Each / 25 / 100 / 1000 • Unit of measure: Each • Content: Delrin (nylon) • 1” (2.5 cm) two way webbing connector with rounded edges.

74

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS

2307


#4 Luggage Stud

BAG

Bag Hardware

MI

Miscellaneous

2325

• Price Breaks: Each / 25 / 100 / 1000 • Unit of measure: Each • Content: Delrin (nylon) • Delrin (nylon) stud for the base of bags, cases, etc. Prevent premature wear on these surfaces. Attaches firmly by means of nail stud and delrin (nylon) washer to prevent pull through. All 3 pieces included in one unit.

1½” Suspender Crossover

2299

• Price Breaks: Each / 25 / 100 / 1000 • Unit of measure: Each • Content: Delrin (nylon) • 3 way connector for 1.5” (3.8 cm) webbings, 45° angle to vertical as illustrated. Common in garment applications but can be used to connect webbing anywhere that these angles are desired.

Visit www.jennisfabrics.com

75


BAS

Bases

RO

Rocker

Important Safety Notice: Swivel Rocker Base Mounting Instructions Due to the variety of size and weight of chairs and the distribution of weight in chair frames, each chair style on which a swivel rocker mechanism is used must be individually balanced by the installer. There are two springs at the front of the base and one at the rear. A. Move unit toward back. This makes the unit more resistant to rocking back. B. Move unit toward front to rock back easier. Warning - Too far in this direction will cause the chair to tip backwards.

A

B

Front

Position one of the five legs so that it is in line with the front of the base. Position the base on the bottom of the chair so that the leg in front is centre aligned with the bottom of the chair so that the leg in front is centre aligned with the bottom of the chair.

How to begin balancing each chair style (Use 5’10 - 6’ (170 - 183 cm) tall, 180 - 200lbs. (82 - 91 kg) occupant)

In a balanced chair, the chair will tip forward when the occupant seated as shown lifts their legs straight out. It may or may not reach front “stop” position but should tip over forward.

In a balanced chair, the chair will sit approximately level (same position as with no occupant) when the occupant sits still with their hands clasped behind their head and their heels lifted off the floor and held against the lower front of the chair frame. The chair should not rock back in this situation.

Note: If both the forward and rearward balance conditions demonstrated above cannot be achieved by relocating the rocker unit per A and B above, the chair being balanced may be too heavy, too large or too deep for this type of mechanism to be safely used.

76

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


2” Swivel Rocker Base 7309

3” Swivel Rocker Base 7319

BAS

Bases

RO

Rocker

5” Swivel Rocker Base 7329olorer cilisi

• Price Breaks: Each / 6

• Price Breaks: Each / 6

• Price Breaks: Each / 6

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

Standard Swivel Rocker Replacement Base These units have been the industry standard for years; in most cases will be a direct replacement. The design incorporates multiple mounting holes for screws or bolts. 5 leg design for maximum stability in all directions. Width at leg base varies from 22” (56 cm) to 24” (61 cm) depending on height of base. Height is measured from the bottom of the base as shown in the diagram. 2” (5.1 cm) height makes the chair approximately 5” (12.7 cm) from ground. 3” (7.6 cm) height makes the chair approximately 6” (15.2 cm) from ground. 5” (12.7 cm) height makes the chair approximately 8” (20.2 cm) from ground.

5¾” (14.6 cm)

Individual replacement parts are available for these bases. 8½” (21.6 cm)

Swivel Rocker Box (without legs) 7339 • Price Breaks: Each / 6 • Unit of measure: Each • Swivel Rocker Base for Custom Applications • The same unit as found on the 5 leg rocker base but without the legs. Mounts using a standard 7” (17.8 cm) swivel plate as a base. Multiple elongated mounting holes will accommodate a wide range of seat types. Swivels 360° and rocks. Overall height is approximately 3” (7.6 cm).

Visit www.jennisfabrics.com

77


BAS

Bases

RO

Rocker

Large Replacement Spring 7341 • Price Breaks: Each / 10 • Unit of measure: Each • Sturdy steel spring, approximately 2.75” x 1.75” (7 x 4.5 cm) to replace those in the swivel rocker bases. Retained by punched tab in base. Just twist and slide over tabs to replace. 2 springs required per unit, replacement as a set is recommended.

Small Replacement Spring

7342 • Price Breaks: Each / 10 • Unit of measure: Each • Replacement for the smaller spring located at the rear of the rocker base unit. Retained by tension from larger springs and located on punched holes in upper and lower units. One per unit.

7” Swivel Rocker Plate

7345 • Price Breaks: Each / 10 • Unit of measure: Each • Replacement for Swivel Chairs • Complete units, pre-lubricated and read to install, no assembly required. Heavy mounting plates are made of 12 gauge steel and hole punched for inside or outside mounting. Long life ball bearing mechanism. Mounting hole centres from 6.5” to 8” (16.5 cm to 20 cm) using elongated holes.

78

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


Return-O-Matic Swivel Plate 7350

BAS

Bases

RO

Rocker

BAS

Bases

OF

Office

• Price Breaks: Each / 10 • Unit of measure: Each • Self Centering Swivel Unit • 7” (17.8 cm) memory return swivel unit for barstools and other applications. Sturdy 12 gauge steel construction with ball bearing swivel surface. Plate size is 731/32” square (51.4 cm2). Mounting hole consists of ⅞” x 9/32” (2.2 cm x 0.7 cm) slots on 521/32” (14.4 cm) centers. Low profile unit adds less than 1” (2.5 cm) height.

Nylon Center Hub

6345

• Price Breaks: Each / 10 • Unit of measure: Each • Nylon centre hub for executive tilter base. Fits any base with a mounting shaft diameter of 1⅛” (2.9 cm). Allows you to replace only the parts of the chair that wear out. • Look in the Legs section for castors for tilter bases: #3053 - 2” (5 cm) hooded ball type. Recommended for hard floor surfaces (LEGCA3053), #3044 - 2” (5 cm) twin wheel chrome type. Recommended for carpeted surfaces (LEGCA3044).

Visit www.jennisfabrics.com

79


BAS

Bases

VA

Van 6” Universal Van Base 9644 • Price Breaks: Each • Unit of measure: Each • MOT Approved Swivel Base • Top plate mounted on 3/16” (0.5 cm) continuous nylon bearing for smooth, long lasting operation. Wedge shaped lock mechanism outwears others. Top plate is not welded thus preventing distortion and eliminating any rocking motion. • Base can be tested to pass MOT/Transport Canada regulations. OEM vehicle manufacuturers are responsible for ensuring proper testing and installation for each model according to Transport Canada guidelines. Testing for aftermarket installation is not required unless specified under Provincial law.

7” Seat Sliders

9612 • Price Breaks: Pair / 5 • Unit of measure: Pair • MOT Approved Sliders • Spring loaded positive double action sliders for use with custom bases and frames or as replacements for worn sliders. Sold by the pair: left and right sides with dual lock release action. • Base can be tested to pass MOT/Transport Canada regulations. OEM vehicle manufacuturers are responsible for ensuring proper testing and installation for each model according to Transport Canada guidelines. Testing for aftermarket installation is not required unless specified under Provincial law.

Seat Belt Bracket

9671 • Price Breaks: Each / 5 • Unit of measure: Each • Mount Seat Belts to Custom Seat Bases • Heavy duty seat belt bracket is Ministry of Transport (MOT) approved. Sturdy construction, mounts to any seat base. • Base can be tested to pass MOT/Transport Canada regulations. OEM vehicle manufacuturers are responsible for ensuring proper testing and installation for each model according to Transport Canada guidelines. Testing for aftermarket installation is not required unless specified under Provincial law.

80

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


310 Recliner Frame

BAS

Bases

VA

Van

9609

• Price Breaks: Each • Unit of measure: Each • Reclining Chair Frame • Fully strapped seat with hop ring bar and detachable foam padded arms. Fully reclining seat also flips forwards to allow rear seat access. Ministry of Transport (MOT) approved welded construction. Molded rebond seat and back are sold separately. • Base can be tested to pass MOT/Transport Canada regulations. OEM vehicle manufacuturers are responsible for ensuring proper testing and installation for each model according to Transport Canada guidelines. Testing for aftermarket installation is not required unless specified under Provincial law.

74” Non Retractable Lap Belt 9696

90” Non Retractable Lap Belt 9686

• Price Breaks: Each / 5 • Unit of measure: Each • Replacements for recreational vehicles, vans, or trucks. 74” (188 cm) or 90” (229 cm) length positive locking seat belts. Available in black to coordinate with interiors. Sturdy mounting.

70” Retractable Lap Belt

9685

• Price Breaks: Each / 5 • Unit of measure: Each • Self winding retractable belt pulls back out of the way when not in use. Positive locking mechanism. Self adjusting. Available in black only.

Visit www.jennisfabrics.com

81


BIN

Binding

SU

Sunbrella® Sunbrella® Double Fold Bias Binding

• Price Breaks: Each • Unit of measure: 100 yard/91.4 m roll • Sunbrella® Quality in Acrylic Bindings • 100% solution dyed acrylic bindings in double fold form. Both ¾” (1.9 cm) and 1” (2.5 cm) binding in a range of the most popular colors to coordinate and finish your Sunbrella® creations. Will not fade or weaken from normal exposure conditions including sunlight, mildew, rot and atmospheric chemicals. Finally a binding that holds up as well as your Sunbrella® products. All the features of Sunbrella® products apply directly to this binding. Be sure to see the pages on the fabrication, care and cleaning of Sunbrella® at the front of the catalogue for tips and information. See page 432 for color swatches.

¾” Beige 4742 Black 4969 Brass 4743 Burgundy 4962 Cadet Grey 4974 Capri 4738 Captain Navy Charcoal Grey Charcoal Tweed 4975 Cocoa Dubonnet Tweed 4957 4970 Fern 4961 Forest

1” 4779 4749 4989 4757 4773 4754 4777 4778 4998 4769 4982 4755

Heather Beige Hemlock Linen Linen Tweed Logo Red Marine Blue Mediterranean Blue Mediterranean Blue Tweed Natural Navy Ocean Blue

¾”

1”

¾”

1”

4971 4965 4966 4741 4976 4967

4979 4760 4775 4758 4955 4999 4762

4960 4739 4958 12012 12013 4956 4968 4972 4963 4964 12014 4973

4761 4746 4985 4953 4771 4759 4774 4980 4954 4767 4765 12011 4776 4503

4959 4740 4751 4977

Oyster Pacific Persian Green Red Royal Blue Sapphire Silver Spa 4981 Sunflower Yellow Taupe 4747 Toast 4748 Toast Tweed True Brown Wheat

All color swatches are located in the Color Swatch Index in the back of the catalogue on page 431.

82

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


Sunbrella® Centerfold Binding

BIN

Binding

CE

Centerfold

• Price Breaks: Each / 5 • Unit of measure: 200 yard/182.8 meter roll • Superior Binding with Centerfold Weave • 100% solution dyed acrylic Sunbrella® binding with a natural fold in the center of the tape to allow for a smooth and more efficient fit onto the item being trimmed. The woven in fold will prevent the binding from necking down when under tension (common in bindings not woven this way). The blind side behaves the same as the front. Can be used with or without guides. All the exposure and mildew resistant features of Sunbrella® products are built in to this binding. Be sure to see the feature on the fabrication, care and cleaning of Sunbrella® products at the front of the catalogue for tips and information. See page 432 for color swatches.

⁷⁄₈” Beige Burgundy Cadet Grey Captain Navy Concord Forest Jet Black Linen Mediterranean Blue

4936 4937 4935 4926 4947 4932 4931 4930 4938

⁷⁄₈” Natural Navy Oyster Pacific Red Taupe True Brown Turquoise White

4939 4934 4978 4927 4946 4952 4950 4942 4929

Centerfold Binding Centerfold binding (left picture) has a natural fold woven into itself and will not put and pucker like the ordinary binding shown on the right.

Visit www.jennisfabrics.com

83


BIN

Binding

FE

Felt SolarGuard 1” Felt Binding 4792 • Price Breaks: Each / 10 • Unit of measure: 50 yard/45.7 m roll • An automotive and marine binding used for dash covers, car-bras and floor mats. 100% solution dyed polyester. Non-woven flat needle construction with a thermobonded finish. 6.0 oz./yard² (203 g/m²). 0.04” (1 mm) gauge. 1” (2.5 cm) wide.

BIN

Binding

GR

Grosgrain

¾” Grosgrain Nylon Binding Black

11161

1” Grosgrain Nylon Binding Black

11163

• Price Breaks: Each / 10 • Unit of measure: 100 yard/91.4 m roll • 100% Nylon Binding for Trimming Bags, Wallets, & Garments • Grosgrain black nylon binding in 2 widths for trimming bags, apparel and other nylon or leather products. Can be used anywhere twill tape is used for binding seams. Woven to each width with finished edges, not cut.

84

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


Para Awning Binding Tape

BIN

Binding

PA

Para

• Price Breaks: Each / 4 • Unit of measure: 165 yard/150 m roll • Awning Binding Tape Coordinates with the Tempotest® line of Awning Fabrics • ⅞” (2.2 cm) width, 100% acrylic binding to go with the Tempotest® line of awning materials. 165 yards (150 m) per roll. Same spun dyed construction as the Tempotest® material. This gives excellent exposure resistance to sun and atmospheric conditions as well resistance to molds, microorganisms and salt. This excellent binding is suitable for use with any awning product. Its use is not confined only to Tempotest® materials. It has a fine, soft hand and is available in a wide rand of colors. See page 433 for color swatches.

⁷⁄₈” Beige Black Burgundy Chocolate Copper Dark Brown Denim Driftwood Fire Forest Graphite Grey Hazelnut

0052 0024 0073 0057 0058 0081 0087 0926 0098 0005 0097 0079 0930

⁷⁄₈” Ivory Khaki Mid Blue Navy Blue Royal Blue Ruby Rust Stainless Steel Tan Tan/Brown Vanilla White Yellow

0151 0007 0075 0010 0013 0011 0084 0094 0014 1481 0929 0015 0012

Visit www.jennisfabrics.com

85


BIN

Binding

TO

Topline

Topline Automotive/Marine Binding Well known Topline bindings for convertible tops, simcons, tonneau covers, door panels, spare tire covers, floor mats, seats, convertible boots, boat tops, marine accessories or any outdoor applications. Constructed of 7.6 gauge vinyl coated on a 2/25” (0.2 cm) drill with a 17 oz. (482 g) finished weight in a Crush (Sierra) or Pinpoint grain. Mildew treated for outdoor use. Tear tensile strength, cold flexibility and bond meet OEM specification. Available in one edge turned or two edge turned styles in the colors and grains listed below. ¾” (1.9) Two Edge Turned Binding

1¼” (3.2 cm) One Edge Turned Binding

¾” Topline Two Edge Turned Binding • Price Breaks: Each / 5 • Unit of measure: 100 yard/91.4 m roll

GM White Pinpoint Black Pinpoint White Crush Black Crush Off White Crush

4750 4752 4764 4766 4768

1¼” One Edge Turned Binding • Price Breaks: Each / 5 • Unit of measure: 100 yard/91.4 m roll

GM White Pinpoint Black Pinpoint White Crush Black Crush Off White Crush

86

4770 4772 4784 4786 4788

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


BIN

Binding

VI

Vinyl

Auto Carpet and Trim Binding Vinyl bias binding for you automotive trimming needs. 100% polyvinyl chloride face with a 65% polyester, 35% cotton backing. Cut on the bias for maximum strength. One edge folded under to give a width of 1¼” (3.2 cm). Ideal for the finishing touch on auto carpets, interior trim pieces, etc. To speed installation, see the Trim Folders on page 89.

1¼” (3.2 cm) One Edge Turned Binding (as seen from behind)

Vinyl Bias Binding

• Price Breaks: Each • Unit of measure: 100 yard/91.4 m roll • See page 433 for color swatches.

Almond Black Blue Camel Charcoal

5009 5004 4944 4943 5010

Grey Maroon Off White White

5008 4945 4948 4940

¾” Marine Binding - Sea White 5006 • Price Breaks: Each / 10 • Unit of measure: 100 yard/91.4 m roll • A 2 edge folded vinyl binding for all your marine trim needs. ¾” (1.9 cm) width, Sea White color. 100% polyvinyl chloride with a 65% polyester, 35% cotton backing.

Visit www.jennisfabrics.com

87


BIN

Binding

TW

Twill Tape

¾” Poly Twill Tape Black 9840

¾” Poly Twill Tape White 9845

• Price Breaks: Each / 10 • Unit of measure: 109 yard/100 m roll • ¾” (1.9 cm) polyester twill tape for binding and edging in 109 yard (100 m) rolls. • Available black or white.

1” Poly Twill Tape Black

9842

1” Poly Twill Tape White

9841

• Price Breaks: Each / 10 • Unit of measure: 109 yard/100 m roll • 1” (2.5 cm) polyester twill tape for binding and edging in 109 yard (100 m) rolls. • Available in black or white.

88

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


¾ “ Repp Wire on Binding Black 5002

BIN

Binding

WI

Wire On

¾ “ Repp Wire on Binding White 5003

• Price Breaks: Each / 10 • Unit of measure: 25 yard/22.8 m roll • Automotive/Truck Binding • Traditional binding that is stitched in place on the edge of the cover, then wired in place on the frame with hog rings or other fasteners. • Available black or white on 25 yard (22.8) meter coils.

Folder for ¾” Bindings 4890

Folder for ⁷⁄₈” Bindings 4892

Folder for 1” Bindings 4897orer cilisi

TOO

Tools

FO

Folder Folder for 1¼” Bindings 4895

• Price Breaks: Each • Unit of measure: Each • Sew Binding 4x Faster • Stitch bindings into place faster and straighter with these adapters. Simply screw the binding folder into place, then guide the material and binding through the machine. Makes a difficult job easier, faster and gives uniform, factory quality seam for that professional fitted appearance.

Visit www.jennisfabrics.com

89


BIN

Binding

TG

Top Gun Double Fold Top Gun Binding 1”

• Price Breaks: Each / 5 • Unit of measure: 100 yard/91.4 m roll • Acrylic Impregnated Polyester Binding to Match Top Gun • Double folded binding made from Top Gun polyester fabric for finishing projects. This material is impregnated with an acrylic coating which makes it the ultimate in marine cover fabrics. Long lasting color, high strength and breathability. Other features of this product are stain, mildew, abrasion and ultraviolet resistance. The coating of Top Gun will not peel, chip, flake or crack even at temperatures as low as -18°C (0°F). Can be cleaned with a mixture of 4 oz. (118 mL) of Clorox® and 2 oz. (59 mL) of soap in 1 gallon (3.8 L) of water. Can be retreated with Aqua-tite® protectant. When using the best in fabrics, use a binding to match! Available in 100 yard rolls. See page 434 for color selection.

Burgundy Caribbean Blue Forest Green Hemp Beige Navy Blue Onyx Black Turquoise White

90

4907 4901 4903 4908 4904 4905 4902 4906

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


BUT

Buttons

Information

Button Information Covered buttons in matching or coordinating colors are the mark of a professional job. Everything needed to make covered buttons is here; the equipment, the cutters and dies and the button molds in all the popular sizes. We also carry all the needles, tufting tools, clips and twines you may need.

Our button molds are sold in packages of one gross (144 pieces) unless otherwise stated. The backs and shells are sold separately. In this section you will find information on sizing buttons as well as some troubleshooting information should you encounter problems. All the button machines listed function by crimping the shell around the button back, and the wide diversity of material thickness and weights can lead to the need for some correction of pressure or possibly a set of dies made for a different gauge of material. If you are not able to resolve your problems with the information provided here, please feel free to consult our Customer Service Centre for further information. Note: There are many types of buttons and machines that are available on a special order basis. If you do not see the item you need here, please contact our Customer Service Centre or your sales profesisonal for more information. Shown roughly to scale:

TO SCALE

22

30

#30 - 2” (5.08 cm) Prong back

36 45

#22 - ⅞” (2.22 cm) Threaded nail back

#22 - 1½” (3.81 cm) Threaded nail back

Button Sizing Information The numbers used to size the upholstery buttons (e.g. 22, 30, 36, 45) are based on a scale of 40 units to the inch, for example a #30 button represents 30 out of 40, or ¾” in diameter before covering. Using this scale, the common sizes roughly translate into: #22 - 9/16” (1.43 cm)

#30 - ¾” (1.9 cm)

#36 - ⅞” (2.22 cm)

#45 - 1⅛” (2.857 cm)

These diameters are shown to scale in the diagram above. The lengths of the backs for the prong and nail back buttons are self explanatory. These are also roughly to scale.

Visit www.jennisfabrics.com

91


BUT

Buttons

Causes & Solutions

Button Problems: Causes and Solutions

1

2

3

4

5

6

7

8

The diagrams above illustrate some of the commonly encountered problems with buttons. The chart below lists the solutions to these problems as recommended by the manufacturers.

Problem 1 2 3

Material does not wrap cleanly around shell to form button.

Check alignment of button dies, adjust stop pins on swivel base. Centre the dies and ensure the models are completely crimped.

Shell is dented or vinyl covering is creased

Die may be for lighter material or stroke pressure may be too high.

Shell not crimped, back of button is not inside shell

Stroke pressure may be too light. Ensure dies are aligned and try increasing pressure

Vinyl material tears or cuts, fabrics cut.

Sign shell being too hard use softer shells. Can also try warming vinyl before crimping, lubricate with silicone, or apply light oil to bottom die (if using vinyl). Also check dies for burrs or nicks.

4

5

Shell not crimped and back pushed up completely inside. Material is too light for the die. Try using a double layer of material or with a lining.

6

Back of button collapses or buckles. Back not far enough into shell, shell is crushed.

Material is too heavy for the die.

Shell loose on top of back. Back pulls out of shell.

Material is too light for the die. Try using a double thickness or material or lining.

7&8

92

Solution

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


#22 Button Shells 2002

#30 Button Shells 2012

#36 Button Shells 2028orer cilisi

BUT

Buttons

UP

Upholstery #45 Button Shells 2038

• Price Breaks: Gross / 5 / 25 • Unit of measure: Gross (144 pieces) • Soft shells for use with various styles of backs. The soft shell is the industry standard for the widest range of applications. Harder shells have a tendency to cut some types of vinyls and fabrics. Order the shells and backs you need for the complete set. • Approximate sizes on these units are: #22 - 9/16” (1.43 cm), #30 - ¾” (1.9 cm), #36 ⅞” (2.22 cm), #45 - 1⅛” (2.85 cm). Diameter prior to covering the buttons.

#22 Rust Resistant Button Shell 2076

#30 Rust Resistant Button Shell 2078

• Price Breaks: Gross / 5 / 25 • Unit of measure: Gross (144 pieces) • Zinc plated soft button shells for use in marine and outdoor furniture, will not rust or cause streaking. All metal backs are zinc plated, standard shells are unplated but do have a treatment to resist corrosion. For extra protection, zinc plating is recommended.

#22 1.5” Prong Backs 2094

#30 1.5” Prong Backs 2096

#36 1.5” Prong Backs 2098er cilisi

• Price Breaks: Gross / 5 / 25 • Unit of measure: Gross (144 pieces) • Two prongs with chiseled ends for pushing through fill provides the attaching mechanism for this button back. Fast and economical, requiring no special skills for installation. Excess prong length can be removed with pliers or side cutters if need be. Ideal for use with solid backed jobs, can also be used on backing materials and similar jobs when using the prong button washer, see part #2021. This unit is sold by the gross without the shell.

Visit www.jennisfabrics.com

93


BUT

Buttons

UP

Upholstery

#22 2” Prong Backs 2011

#30 2” Prong Backs 2013

#36 2” Prong Backs 2015r cilisi

• Price Breaks: Gross / 5 / 25 • Unit of measure: Gross (144 pieces) • Two prongs with chiseled ends for pushing through fill provides the attaching mechanism for this button back. Fast and economical, requiring no special skills for installation. Excess prong length can be removed with pliers or side cutters if need be. Ideal for use with solid backed jobs, can also be used on backing materials and similar jobs when using the prong button washer, see part #2021. This unit is sold by the gross without the shell.

#22 2.5” Prong Backs 2100

#30 2.5” Prong Backs 2102

#36 2.5” Prong Backs 2104 cilisi

• Price Breaks: Gross / 5 / 25 • Unit of measure: Gross (144 pieces) • Two prongs with chiseled ends for pushing through fill provides the attaching mechanism for this button back. Fast and economical, requiring no special skills for installation. Excess prong length can be removed with pliers or side cutters if need be. Ideal for use with solid backed jobs, can also be used on backing materials and similar jobs when using the prong button washer, see part #2021. This unit is sold by the gross without the shell.

Prong Button Washers

2021 • Price Breaks: Gross / 5 / 25 • Unit of measure: Gross (144 pieces) • Use the washer as illustrated to give solid location of prong style button and minimize the chance of pull-through. Can be used to give extra support to tufting clasps. Strongly recommended with any of the prong button molds.

94

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


#11 Plastic Tufting Washer

BUT

Buttons

UP

Upholstery

2108

• Price Breaks: Gross / 5 / 25 • Unit of measure: Gross (144 pieces) • An easy to use washer, can be threaded onto pre-tied strings or tufted through the centre normally. Will not corrode or rust and is silent when in contact with metal or wood components. 1⅛” in diameter.

#22 Wire Eye Backs 2001

#30 Wire Eye Backs 2003

#36 Wire Eye Backs 2005er cilisi

#45 Wire Eye Backs 2006

• Price Breaks: Gross / 5 / 25 • Unit of measure: Gross (144 pieces) • A sturdy closed loop wire eye for attaching the button used in tufting and other button applications. Will withstand and 80lb (36.3 kg) pull. Can be tied, used with clasps from a tufting needle or otherwise attached. The most common and versatile back. These are sold by the gross without the shells. Order the shells as listed above.

#22 - 44 Small Loop Eye Back 2080

#30 - 44 Small Loop Eye Back 2082

#36 - 44 Small Loop Eye Back 2084er cilisi

• Price Breaks: Gross / 5 / 25 • Unit of measure: Gross (144 pieces) • The #44 small wire eye back has a smaller eye to be used against delicate materials to minimize piercing and runs. Zinc plated for rust resistance. Accepts all button shells by size.

Visit www.jennisfabrics.com

95


BUT

Buttons

UP

Upholstery

#22 7/8” Threaded Nail Backs 2041

#30 7/8” Threaded Nail Backs 2043

#36 ¾” Threaded Nail Back 2045 cilisi

#22 1½” Threaded Nail Backs 2051

• Price Breaks: Gross / 5 / 25 • Unit of measure: Gross (144 pieces) • Threaded nail back buttons for use in applications using the spring washer listed below. Using this combination will ensure positive placement of the button, even in wood. It prevents pulling out as the wood ages and movement of the button occurs, loosening the nail back. Available in 3 different sizes listed. Matching shells are sold separately: #22 - #3006, #30 - #2012, #36 - #2028.

/16” Spring Washers

15

2067 • Price Breaks: Gross / 5 / 25 • Unit of measure: Gross (144 pieces) • Use the washer illustrated to give better location of nail back buttons and minimize the chance of pull-through. The nail cannot pull back through once gripped by the teeth of the washer. Rounded edges have no sharp corners. 15/16” (2.4 cm) diameter.

#30 Dura Snap Rings

2036

#36 Dura Snap Rings

2030

• Price Breaks: Gross / 5 / 25 • Unit of measure: Gross (144 pieces) • High impact nylon rings that work with upholstery soft shells to create a covered button that fits over any standard Dura Snap. This product is available in two sizes and is a versatile option in finishing and trimming applications as well as in automotive and marine areas.

96

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


#30 ½” Pivot Back and Tack

BUT

Buttons

UP

Upholstery

2037

• Price Breaks: Gross / 5 / 25 • Unit of measure: Gross (144 pieces) • Special two part back can be installed from the back of a surface and gives a pivoting action. Ideal when a button is required on only one side of a cushion. Can be used in tailoring skirts. Easily snapped together with hand pressure but will not pull apart.

#30 Single Pivot Back 2039 • Price Breaks: Gross / 5 / 10 • Unit of measure: Gross (144 pieces) • The single pivot female half comes with separate serrated tacks. Can be used where a button is on one side of a cushion or to tailor skirts. The female half is assembled with a retaining pivot spring steel lock washer which grips the serrated pivot tack. These buttons are covered then easily snapped together and hold tight.

½” Serrated Pivot Tack

2040

• Price Breaks: Gross / 5 / 10 • Unit of measure: Gross (144 pieces) • This is the serrated tack for use with the #2039 Single Pivot Back. Snaps cleanly into the assembled pivot back.

Visit www.jennisfabrics.com

97


BUT

Buttons

UP

Upholstery

#40 White Nylon Hook Buttons 2072

#40 Ivory Nylon Hook Buttons 2074

• Price Breaks: Gross / 10 • Unit of measure: Gross (144 pieces) • #40 (1”/2.54 cm) nylon buttons are perfect for outdoor applications such as lawn furniture. One piece molded design with hook backs for use with twine of pre-tied strings. Design on hooks prevents twine from pulling out after insertion.

#22 Nylon Hook Back Only 2086

#30 Nylon Hook Back Only 2088

#36 Nylon Hook Back Only 2090cilisi

#45 Nylon Hook Back Only 2092

• Price Breaks: Gross / 5 / 10 • Unit of measure: Gross (144 pieces) • Nylon hook backs can streamline and speed up tufting operations with the patented dual locking hook. Pre-tied loops or Fastufts can be used with these quick snap in backs.

3” Pretied Strings

2031 • Price Breaks: Box / 5 • Unit of measure: Box of 1000 • Pre-measured and tied strings with permanent knot, speeds up the application of hook buttons listed above.

98

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


#1 Junior Button Machine

BUT

Buttons

MI

Miscellaneous

2121

• Price Breaks: Each • Unit of measure: Each • This versatile bench mounted manual press type machine cuts, covers and makes firm solid buttons. It is designed to work with 2 piece dies and the short cutter. It includes a wood block for use in cutting covers and is capable of approximately 90 buttons per hour. Total height is 22” (55.9 cm), and shipping weight is 13lbs. (5.89 kg). All the cutters and dies that are listed on the next page are used for this #1 Junior Button Machine. Cutters and dies are stocked for all common button sizes.

Model 30-S Swivel Foot Press

• Price Breaks: Each • Unit of measure: Each • When production demands are high but do not justify the expense and output of fully automatic machines, the Model 30-S Swivel die foot press unit is the answer. It uses a standard 3 piece die and long cutter to cover buttons up to #80 at a rate of approximately 400 per hour. This unit comes mounted on a large, heavy duty stand with a lipped work table for convenient handling of button supplies. Durable and easy to operate. This unit requires floor space of 17.5” x 23” (44.5 cm x 58.4 cm) and height of 48” (121.9 cm). Shipping weight is 190lbs. (86.1 kg), unit weight is 154lbs. (69.7 kg) • Model 30-S Swivel Foot Press and 3 piece dies are special order items. Delivery is approximately 3 weeks.

Model 84PS Pneumatic Swivel Machine • Price Breaks: Each • Unit of measure: Each • This pneumatic machine is equipped with a pressure regulator, filter and lubricator. It uses standard 3 piece dies and long cutters to make up to 500 buttons per hour. Manual pressing is eliminated, giving a more consistent product. Unit comes on a strong, heavy duty stand with a built in table. This unit requires floor space of 17.5” x 23” (44.5 cm x 58.4 cm) and a clear height of 67” (170.2 cm). Shipping weight is 240lbs. (108.7 kg), unit weight is 220lbs. (99.7 kg) • Model 84PS Pneumatic Swivel Machine and 3 piece dies are special order items. Delivery is approximately 3 weeks.

Visit www.jennisfabrics.com

99


BUT

Buttons

DI

Dies

Cutters & Dies for #1 Junior Machine All the cutters and dies listed here are for the #1 Junior Machine only. Any other cutters or dies are special order items requiring approximately 3 weeks delivery. J. Ennis Fabrics carries a variety of other parts and accessories for use in the buttoning and tufting jobs. Be sure to check out our line of tufting twine on page 121, as well as our selection of tufting needles and clips on page 245. We also carry needles in varying lengths and point styles for all applications. See page 242 for a full listing.

#22 Regular Cutter & Die Set 2141

#30 Regular Cutter & Die Set 2143

#36 Regular Cutter & Die Set 2145cilisi

#45 Regular Cutter & Die Set 2147

• Price Breaks: Each • Unit of measure: Each • Two piece dies and short cutter for use in #1 Junior Button Machine. This regular die is recommended for the majority of fabrics. Heavy dies listed below are for heavier materials and thicker vinyls. One set is required for each size of button.

#22 Heavy Cutter adn Die Set

2133

#30 Heavy Cutter and Die Set 2135

• Price Breaks: Each • Unit of measure: Each • For heavier fabrics and vinyls, this die compensates for material thickness to allow quick and proper assembly of the button. Set includes the cutter for cutting material. For use in the #1 Junior Button Machine only.

100

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


#22 Cutter Only 2151

#30 Cutter Only 2153

BUT

Buttons

CU

Cutters

#36 Cutter Only 2155er cilisi

• Price Breaks: Each • Unit of measure: Each • The button machine and dies work best when the covers for the button mold are the correct size and shape and to ensure this we offer the short cutter for the die sets listed previously. The cutters do wear with time and the best way to ensure clean round covers for use in the button machine is to keep the cutter current. Make sure that there is always a soft wooden block or hole cutting pad (#6120) used to extend cutter life.

Visit www.jennisfabrics.com

101


CLE

Cleaners

Applications

Cleaner Applications

Cleaners

As a guide to preparation, cleaning and protecting we have provided the following chart as a quick reference.

Surface

Recommended Product

Page

Chrome Metal Aluminum Flexible Clear Plastics Glass and Hard Clear Plastics Upholstery Fabrics Healthcare/Nursing Acrylic Fabrics (Sunbrella®)

Metal Polish Metal Polish Metal Polish Klear-to-Sea Klear-to-Sea Spot Lifter Germicidal Cleaner Acrylic Fabric Cleaner

105 105 105 106 106 107 106 108

AER

Aerosols

PR

Protectants Iosso® Water Repellent 7103

Iosso® Water Repellent Ready to Use 7104

Iosso® Water Repellent Concentrate 7105rer cilisi

• Price Breaks: Each / 6

• Price Breaks: Each

• Price Breaks: Each

• Unit of measure: 22 oz./650 mL bottle

• Unit of measure: 1 gallon/3.8 L can

• Unit of measure: 1 gallon/3.8 L can

• Ready to use

• Concentrate

Iosso® Seam Sealer

7106 • Price Breaks: Each / 12 • Unit of measure: 4 oz./118 mL bottle

Iosso® Seam Sealer

7107

• Price Breaks: Each • Unit of measure: 1 gallon/3.9 L pail

102

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


T202 Tempotest Teflon Spray

AER

Aerosols

PR

Protectants

7169

• Price Breaks: Each / 24 • Unit of measure: 13.5 oz./400 mL bottle • T202- Teflon spray for Tempotest® fabrics. • Teflon, made by DuPont, makes fabrics water, oil, and stain repellent. T202 has been created by Parà to re-establish the total water repellency on Tempotest® fabrics after many years use or to make seams waterproof as seams are frequently treacherous points for water leaking.

Iosso® Water Repellent Iosso® Water Repellent is effective on all fabrics. It protects fabric from water, soils, oils, bird droppings, and environmental pollutants. It resists mildew and stains and increases weatherability. It won’t change the color, feel or breathability of the fabric. Recommended for use on awnings, canopies, tents, patio furniture cushions, umbrellas, spa covers, tarps, boat covers, bimini tops, hunting fabrics, camping gear, leather, synthetics and vinyls. Solution is ready to use or concentrated. Non-solvent, non silicone formula.

Iosso® Seam Sealer Ideal for boat covers, awnings, tents, backpacks and almost anything else where you need a water tight seam. Seam Sealer will not change the look or feel of your fabric. For best results use with cotton, cotton blends, polyester and synthetic woven fabrics. While Seam Sealer may be used on vinyl coated or laminated fabrics, the water repellency will vary.

Iosso® E-Z Snap® Lubricant

AER

Aerosols

CL

Cleaners

7108

• Price Breaks: Each / 24 • Unit of measure: 1.5 oz./44 mL tube • E-Z-Snap lubricates, waterproofs, protects and reduces friction on snaps, zippers, hinges and hardware. This is a non-staining, non-solvent, non-silicone, non-toxic formula. 1.5 oz. tube of easy to place gel, will not run. • Place one drop in the head of the snap, then close and open it a few times. Place a few drops down the center of a zipper. Work the zipper a few times to distribute the lubricant. If removal is necessary, use the Safe-T-Solve, and wash as usual.

Visit www.jennisfabrics.com

103


CLE

Cleaners

IO

Iosso® Iosso® Single Tier Display

7116 • Price Breaks: Each • Unit of measure: Each • Point of Purchase Display • This display is designed for retail point of purchase. The single tier display weighs 25lbs. (11.3 kg) and is designed to hold 12 jars of mildew cleaner, 12 E-Z Snap tubes, 12 bottles of Seam Sealer, as well as 6 bottles of Water Repellent.

Iosso® Mildew Stain Remover

7100 • Price Breaks: Each / 6 • Unit of measure: 12 oz./340 g jar

Iosso® Mildew Stain Remover 7101 • Price Breaks: Each • Unit of measure: 65 oz./1.84 kg pail

Mold & Mildew Stain Remover Clean mold, mildew, dirt and algae stains from virtually every boat surface. Just add water to the biodegradeable powder and soak the solution into the soiled areas. Can be used on vinyl, plastic, canvas, carpeting, wood, fiberglass, painted surfaces, sails and accessories. 12 oz. (340 g) jar makes 3 gallon (11.4 L) of solution. 65 oz. (1.84 kg) pail makes 16 gallons (60.6 L) of solution

104

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


Iosso® Metal Polish

CLE

Cleaners

IO

Iosso®

7109

• Price Breaks: Each / 12 • Unit of measure: 3 oz./85 g tube

Iosso® Metal Polish

7111

• Price Breaks: Each / 6 • Unit of measure: 1lb./450 g can

Iosso® Metal Polish A quick and easy application that leaves a brilliant, shiny protective coating. Can be used on brass, copper, chrome, stainless steel, aluminum, magnesium, silver, gold, porcelain, fiberglass, Plexiglas, hard plastics and painted surfaces.

Iosso® Safe-T-Solve®: A Tough Fast Acting Cleaner Safe-T-Solve® is a water based cleaner with no petroleum and is biodegradeable. It will penetrate and lift preservative accumulated cutting fluids, petroleum residues, road tar, graffiti, chewing gum and much, much more. Simply spray or dip the item to be cleaned, then rinse with clean water or wipe with a clean rag.

Iosso® Safe-T-Solve®

7113

• Price Breaks: Each / 6 • Unit of measure: 32 oz./946 mL spray bottle

Iosso® Safe-T-Solve®

7114

• Price Breaks: Each • Unit of measure: 1 gallon/3.8 L bottle

Visit www.jennisfabrics.com

105


CLE

Cleaners

PL

Marine Window Klear-to-Sea

7168 • Price Breaks: Each / 12 • Unit of measure: 16 oz./473 mL pump bottle • Cleaner & Preservative leaves a “Klear Coating” • This environmentally safe product eliminates the necessity for multiple cleaners. It safely cleans and protects glass and plastics. It is anit-static and anti-fog, fills in minor scratches and imperfections, protects from salt spray damage and cleans with no streaks or smudging. It removes fingerprints and greasy films, reduces glare and “renews” plastic windows. Use on mirrors, glass, plastics, clear vinyls, Plexiglas, Lexan, etc.

CLE

Cleaners

VI

Vinyl Cleaner Germicidal Cleaner

7200 • Price Breaks: Each / 12 • Unit of measure: 19 oz./538 g can • This institution strength aerosol cleaner will kill most germs. Protects against: Staphylococcus aureus, Pseudomonas aeruginosa, salmonella choleraesuis, Trichophyton mentagrophytes, Adenovirus Type 2, Influenza A2/Japan Virus, Vaccina (Poxvirus), and herpes Simplex Virus Types 1 and 2 on hard inanimate non porous environmental surfaces. • Disinfects: Surfaces such as toilet seats, fixtures, wash bowls, shower stalls, walls, woodwork and counter tops. The easy way to clean, disinfect and deodorize. Spray and wipe clean. Disinfects without scouring or scratching. Use in nursery and sickroom, for garbage and diaper pails, for any washable surface that needs disinfecting as you clean. Needs no rinsing.

106

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


Spot Lifter

CLE

Cleaners

SP

Spot Lifter

7198

• Price Breaks: Each / 12 • Unit of measure: 17.3 oz./490 g can • Powder Type Spot Lifter • Leaves no rings. Spray on, let dry and brush off. Will remove grass stains, oil, grease and most food spots. Use on wool, cotton, silk, corduroy, dacron, nylon, orion and other synthetic materials including most upholstery materials, carpets, clothing and wallpaper. Spray on, allow to dry to a white powder (approximately 10 minutes) then brush or vacuum off, repeat if necessary

303 Cleaner/Spot Remover 11047 • Price Breaks: Each / 8 • Unit of measure: 32 oz./950 mL • Carpet & Upholstery • Utilizes a proprietary blend of sequester agents, surfactants and hyper-wetting agents to lift and suspend oil, grease and dirt to be easily wiped or rinsed away. It is completely safe for use on all water-safe fabrics to quickly remove even the most difficult stains. And unlike soaps, detergents and other cleaning products, 303 Cleaner and Spot Remover rinses away completely...leaving no residue.

Visit www.jennisfabrics.com

107


CLE

Cleaners

AC

Acrylic Fabric Cleaner 303 Fabric Cleaner

7202 • Price Breaks: Each / 8 • Unit of measure: 32 oz./950 mL bottle • For marine canvas, fabric convertible tops, awnings, indoor and outdoor furniture, carpet and upholstery. Concentrated. Perfect to pre-clean canvas prior to “water-proofing”. Rinses residue free and is safe for all water-safe materials. For spot cleaning, use full strength or diluted (up to 10-1 or more). For general cleaning, add a cup or more to 1 gallon of warm water. Safely removes even the most difficult stains. No foam, no fumes, no odor. Recommended by Sunbrella®.

303 Patio Furniture Cleaner

11045 • Price Breaks: Each / 12 • Unit of measure: 16 oz./473 mL • 303 Patio Furniture Cleaner utilizes a proprietary blend of components to lift and suspend surface contaminants that are then easily wiped or rinsed away. 303 PFC is particularly effective on oil, grease and environmental contaminants. This product is safe to use full strength or diluted with water on any water-safe surface. The cleaning action of this product increases with warm water, agitation and longer dwell time. • After cleaning, retreat and protect cleaned teak, resin, plastic, vinyl and metal with 303 Patio Furniture Protectant - the world’s best protection against soiling, stains and sun damage.

303 Patio Furniture Protectant

11046 • Price Breaks: Each / 12 • Unit of measure: 16 oz./473 mL • 303 Patio Furniture Protectant (PFP) is the world’s most powerful UV screening product. 303 PFP leaves an enduring repellent finish that rejects soiling, sweat, body oils and atmospheric contaminants.

108

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


Crypton® Care Trigger

CLE

Cleaners

FA

Crypton®

7072

• Price Breaks: Each • Unit of measure: Each • Easy, spray trigger. Made of durable polyethylene plastic and compatible with all the Crypton® products.

Crypton® Care Food/Beverage/ Protein Stain Remover

7073

• Price Breaks: Each / 6 / 12 • Unit of measure: 24 oz./710 mL bottle • A professional strength, ready-to-use spot cleaner that is built to remove tough stains like blood, grass, food and beverage stains. Apply this Crypton® Care upholstery cleaner to the spot and lightly agitate. Blot up the solution with a clean, dry towel. Finally, rinse free with water.

Crypton® Care Ink/Grease/Oil Stain Remover

7070

• Price Breaks: Each / 6 / 12 • Unit of measure: 24 oz./710 mL bottle • A professional strength, ready-to-use spot cleaner engineered to remove the toughest stains. Great for stains that require solvent cleaners! Apply this Crypton® Care upholstery cleaner to the spot and lightly agitate. Blot up the solution with a clean, dry towel. Finally, rinse free with water.

Visit www.jennisfabrics.com

109


CLE

Cleaners

FA

Crypton® Crypton® Care Deodorizing Mildew 7069 Resistant Fabric Refresher • Price Breaks: Each / 6 / 12 • Unit of measure: 24 oz./710 mL bottle • The Fabric Freshener is a professional strength, ready-to-use product that removes odors on fabrics. It is a neutral quaternary disinfectant on non-porous surfaces and is engineered to safely clean and leave upholstery and any room smelling fresh and clean.

Crypton® Care Leather & Vinyl Cleaner & Restorer

7082 • Price Breaks: Each • Unit of measure: 24 oz./710 mL x 2 bottles • These products are specially formulated to safely clean treated leather and vinyl with natural degreasers. After cleaning, restorer is designed to replenish natural oils. Wipe on the restorer with a clean, dry cloth to instantly provide beauty and luster.

Crypton® Upholstery Stain Removal Kit 7083 • Price Breaks: Each • Unit of measure: Each • Contains: 1- 8oz. Bottle- Ink, Iodine and Grease Stain Remover 1- 8 oz. BottleFood, Beverage and Protein Stain Remover, 1- 8 oz. Bottle- Fabric Freshener and Disinfectant, 1- Crypton Care Spray Top. • Apply a generous amount of the cleaner on the stain. Use the Crypton Brush to work in the cleaner if needed. You will see that the stain has now liquefied. The key here is to have a dry cloth to soak up the stain, because the stain will be drawn to the dry cloth. Rinse with clean water. This procedure applies to any fabric or carpet.

110

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


Crypton® Ink Remover Leather/Vinyl 7084

CLE

Cleaners

FA

Crypton®

• Price Breaks: Each / 24 • Unit of measure: 0.5 oz./15 mL bottle • This professional strength, ready-to-use cleaner is engineered to remove the toughest stains like ink, iodine, grease, markers, and red stains. Effective for us on both leather and vinyls. This is a smaller size for trial or portable use. Great for stains that previously required solvent cleaners.

Crypton® Care Upholstery Brush 7071 • Price Breaks: Each • Unit of measure: Each • This compact upholstery brush was developed specifically for use on soft textiles through combined efforts with the Fuller Brush Company: Commercial Division to work on all upholstery without damaging fabric. Soft, black bassine fibers in a rigid polyethylene block provide the proper agitation. Use this brush to safely clean all soft textiles.

Leather Care Vinyl & Leather Conditioner

7081

• Price Breaks: Each / 12 • Unit of measure: 14 oz./396 g • Safely cleans and restores lustre to vinyl and leather finishes. The foaming action of this non-solvent based formulation penetrates and eliminates dirt and grime effectively, and leaves a lustrous protective film on applied surfaces.

Visit www.jennisfabrics.com

111


CLE

Cleaners

ST

Strataglass Strataglass Protective Cleaner 7090 • Price Breaks: Each / 12 • Unit of measure: 16 oz./473 mL bottle • Strataglass Protective Cleaner is uniquely formulated to clean, shine and protect Strataglass and the Strataglass scratch resistant protective coating. Special UV inhibitors in Strataglass Protective Cleaner significantly extend the useful life of Strataglass by minimizing the deteriorating effects of sunlight. This helps defeat the common problem of age induced brittleness and promotes continued flexibility. Strataglass Protective Cleaner is safe to use daily and is recommended to be used often to properly maintain the famous clarity of Strataglass. An additional benefit is the frequent use of Strataglass Protective Cleaner will rejuvenate the protective properties of Strataglass Protective Polish, which should be used on a less frequent but regular schedule.

7091

Strataglass Protective Polish

• Price Breaks: Each / 12 • Unit of measure: 16 oz./473 mL bottle • Strataglass Protective Polish is a polymer-based product specifically formulated to safely clean, polish and protect Strataglass and the scratch resistant protective coating. Strataglass Protective Polish is recommended for use every 2 to 3 months. In areas of high fallout use every 4 to 6 weeks is recommended. Frequent use of Strataglass Protective Cleaner between polishing will increase protection by rejuvenating the protective qualities of Strataglass Protective Polish.

Stamoid Marine Vinyl Protective Cream Cleans, shines and protects marine vinyl. A polymer-based formula designed to protect Stamoid, and other vinyl in marine environments, while insuring the retention of like-new suppleness and luster. With UV protection, static resistance and life extending plasticizers this proprietary formulation causes molecular bonding which creates a nearly invincible protective barrier. Recommended usage every 2 to 3 months.

Stamoid Marine Vinyl Protective Spray Formulated to clean, shine and protect Stamoid Marine vinyl and works equally well on similar vinyl products. Special UV inhibitors significantly extend the useful life of Stamoid Marine vinyl by minimizing the deteriorating effects of direct sunlight. UV protection, coupled with the rejuvenation effects of included plasticizers, helps defeat age induced brittleness and assures a longer product life. Enhances the protective qualities of Stamoid Marine Protective Cream.

Stamoid Marine Vinyl Cleaner Formulated to gently but thoroughly clean Stamoid and other marine vinyl. This product (overspray) will not harm Strataglass or any other clear vinyl when used according to the instructions. Frequent use is recommended, particularly in areas of environmental pollution. Application of Stamoid Marine Vinyl Protective Spray between cleaning will assure the continued like-new appearance of your yacht’s vinyl.

112

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


#601 Stamoid Vinyl Protective Cream 7092

CLE

Cleaners

ST

Stamoid

• Price Breaks: Each / 12 • Unit of measure: 16 oz./473 mL

#601 Stamoid Vinyl Protective Cream 7093

• Price Breaks: Each / 4 • Unit of measure: 1 gallon/3.8 L

#602 Stamoid Vinyl Protective Spray 7094 • Price Breaks: Each / 12 • Unit of measure: 16 oz./473 mL

#602 Stamoid Vinyl Protective Spray 7095 • Price Breaks: Each / 4 • Unit of measure: 1 gallon/3.8 L

#603 Stamoid Vinyl Cleaner

7096

• Price Breaks: Each / 12 • Unit of measure: 16 oz./473 mL bottle

#603 Stamoid Vinyl Cleaner

7097

• Price Breaks: Each / 4 • Unit of measure: 1 gallon/3.8 L

Visit www.jennisfabrics.com

113


COR

Cords

AW

Awning

#4 1/8” Nylon Diamond Braid Cord 6701 • Price Breaks: Each • Unit of measure: 1000 foot/304 m roll • ⅛” (0.32 cm) white nylon diamond braid cord. Breaking strength on this product is 660lbs. (300 kg). Use in awnings and other applications. Black dot on illustration is the approximate diameter.

TO SCALE

6704

#5 5/32” Nylon Diamond Braid Cord

• Price Breaks: Each • Unit of measure: 1000 foot/304 m roll •

5

/32” (0.4 cm) white nylon diamond braid cord. Break strength of 1000lbs. (453 kg).

TO SCALE

6705

#6 3/16” Nylon Diamond Braid Cord

• Price Breaks: Each • Unit of measure: 1000 foot/304 m roll •

3

/16” (0.48 cm) white nylon diamond braid cord. Break strength of 700lbs. (318 kg).

TO SCALE

114

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


#3.5 7/64” Nylon Diamond Braid Cord 6695

COR

Cords

DR

Drawstring

• Price Breaks: Each • Unit of measure: 250 foot/76 m roll 7 /64” (0.27 cm) white nylon diamond braid cord. Breaking strength of 440lbs. (200 kg). Small diameter and high strength make this product a natural choice for drawstrings. 250 foot (76 meter) roll is easy to handle.

#3.5 7/64” Nylon Diamond Braid Cord 6698

• Price Breaks: Each • Unit of measure: 1000 yard/914 m roll • Large 1000 yard (914 meter) spool of the same 7/64” (0.27 cm) diamond braid cord listed previously. Bulk spool is more economical for larger production runs.

4 mm Poly Drawstring Black

11190

4 mm Poly Drawstring White

11194

• Price Breaks: Each / 4 • Unit of measure: 250 yard/228.5 m roll • 100% polypropylene drawstring in bulk on a 250 yard (228.5 meter) spool. 4mm thickness is equivalent to 5/32” (0.4 cm). Also available in black or white.

TO SCALE

Visit www.jennisfabrics.com

115


COR

Cords

DR

Drawstring

36” Pre-made 4 mm Drawstring Black 11191

36” Pre-made 4 mm Drawstring White 11195

• Price Breaks: Package / 10 • Unit of measure: Package of 144 • Save time on the production line with these 5/32” (0.4 cm) pre-made drawstrings with plastic tipped ends. Also available in black or white.

TO SCALE

COR

Cords

LO

Locks

Flat Top Jacket Cord Lock Black 2214

116

Jacket Cord Lock Antique 2209

Jacket Cord Lock Black 2210

Square Cord Lock Black 2211

• Price Breaks: Each / 25 / 100 / 1000

• Price Breaks: Each / 25 / 100 / 1000

• Price Breaks: Each / 25 / 100 / 1000

• Price Breaks: Each / 25 / 100 / 1000

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

• Delrin jacket string locks for use in garment of bag applications.

• Cord lock for various garment applications.

• Cord lock for various garment applications.

• Square style cord locks.

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


Ball Cord Lock Black 2213

Draw Cord Bell End Antique 2215

Cords

LO

Locks

COR

Cords

RO

Rope

Wheel Lock Black 2216r

• Price Breaks: Each / 25 / 100 / 1000

• Price Breaks: Each / 25 / 100 / 1000

• Price Breaks: Each / 25 / 100 / 1000

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

• Sliding ball cord lock in black.

• Keep things neat with this bell end for covering knots in draw cords.

• Sliding and locking cord adjuster in black.

¼” Polypropylene Rope

COR

6673

• Price Breaks: Each • Unit of measure: 1300 foot/395.2 m spool • Monofilament ‘polyprop’ is the lightest, most widely used, economical rope on the market. Strength is far greater than Manila. It has long life, is easy to handle, remains flexible in cold temperatures and has excellent resistance to most acids and alkalis. It also has very good impact loading. Plus it floats! Suitable for a wide variety of applications including commercial fishing lines, towing and mooring lines, electrical line stringing, utility rope, scaffolding rope and more. The product is rate at medium for elongation and stretch. Rated excellent for mildew, acid and alkali resistance. Fair resistance to sunlight and organic solvents, with a critical temperature of 392.4°C (250°F). • Break strength is 1050lbs. (475.7 kg).

TO SCALE

Visit www.jennisfabrics.com

117


COR

Cords

SH

Shock /16” Nylon Shock Cord White 6680

3

• Price Breaks: Each / 5 • Unit of measure: 144 yard/132 m roll • Light 3/16” (0.48 cm) nylon bungee cord in bulk. Can be customized into any length or cord using the components listed on the following pages.

TO SCALE

¼” Nylon Shock Cord White 6685

/16” Nylon Shock Cord White 6690 5

/8” Nylon Shock Cord White 6692rer cilisi 3

• Price Breaks: Each / 5 • Unit of measure: 83 yard/75 m roll • White nylon bungee cord in 83 yard spool (75 m). Use with clamps and hooks below to get custom lengths for all your applications. Be sure to also see the nylon and adjustable snap cord hooks (BAGHO #2723, #2723, #2722).

TO SCALE

1

/8” Nylon Shock Cord Black

6679 • Price Breaks: Each / 5 • Unit of measure: 166 yard/152 m spool • ⅛” (0.32 cm) black nylon shock cord. Used as drawstrings in apparel items.

TO SCALE

118

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


/16” Polypropylene Shock Cord Black 6683

3

COR

Cords

SH

Shock

• Price Breaks: Each / 5 • Unit of measure: 167 yard/154 m spool • Bungee cord in polypropylene material. Has all the characteristics of polypropylene and is available in bulk for use in apparel, bag for use in apparel, bag tarping and other projects.

TO SCALE

/8” Steel S-Hook

1

7821

• Price Breaks: #7821: Package / 10 / 40

¼” Steel S-Hook

7841

#7841: Package / 3 / 9

• Unit of measure: Package of 100 • Steel S-Hook for forming cord and strap ends. Size denotes the shock cord or rope that will pass cleanly through the small end of the hook.

/8” Stainless Steel S-Hook 7820

1

¼” Stainless Steel S-Hook 7840

• Price Breaks: Each / 25 / 100 • Unit of measure: Each • Stainless steel S-hooks for superior resistance to environmental exposure.

Visit www.jennisfabrics.com

119


COR

Cords

SH

Shock

/8” - 3/16” Stainless Steel Clamp 7801

1

/32” - ¼” Stainless Steel Clamp 7806

7

¼” - 5/16” Stainless Steel Clamp 7811rer cilisi

• Price Breaks: Package / 4 / 20 • Unit of measure: Package of 25 • Secure the shock cord with these stainless steel clamps. Excellent resistance to environmental elements.

¼” Metal Shock Cord Hook Black 7843

/16” Metal Shock Cord Hook Black 7844 5

/8” Metal Shock Cord Hook Black 7845orer cilisi 3

• Price Breaks: Each / 25 / 100 • Unit of measure: Each • Metal shock cord hooks, available in varying sizes. Painted for longer life and plastic tipped to prevent marking of adjacent surfaces.

3

/16” Stainless Steel Cone Hook

7800

/16” Stainless Steel Cone Hook

5

7810

• Price Breaks: Each / 25 / 100 • Unit of measure: Each • Stainless steel cone hooks for superior resistance and a neat finished appearance with the cord inside the cone.

120

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


COR

Cords

TW

Twine

#2 Barbours Twine - Linen 8121 • Price Breaks: Each / 6 • Unit of measure: 0.5lb./250 g box • Barbours #2 linen twine in a 250 g (approximately 0.5lb.) spool. Recommended for stitching edges, button tufting, and general upholstering. Natural linen color.

#6 Ludlow Polyester Twine 8122 • Price Breaks: Each • Unit of measure: 5lbs./2.3 kg spool • 100% polyester twine for tying springs. Tuff twine is twice as strong and won’t rot like hemp. With reliable known retention, tuff twine holds springs firmer.

#9 Nylon Tufting Twine

8125

• Price Breaks: Each / 10 • Unit of measure: 8 oz./226 g spool • Finer twine than the #6 listed above, but still very strong. Suitable for tying and tufting buttons. Excellent strength and resistance characteristics in a finer twine. White.

Visit www.jennisfabrics.com

121


ELA

Elastics

KN

Knit

½” Knit Elastic (200 m) White 4236

/8” Knit Elastic (264 m) White 4239 3

¾” Knit Elastic (125 m) White 4249

1” Knit Elastic (50 m) White 4241

• Price Breaks: Each / 5 • Unit of measure: Roll sizes as listed • Content: 62% polyester, 38% rubber • Lighter than woven elastic but still strong enough to be used for waistbands, slipcovers, drapery, tire covers, boat covers, or to hold cushions on furniture and for a variety of apparel applications. • Shrinkage: 10%, Stretch: 125%

1” Knit Elastic (50 m) Black 4243

1½” Knit Elastic (50 m) Black 4246

2” Knit Elastic (50 m) Black 4248orer cilisi

• Price Breaks: Each / 5 • Unit of measure: Roll sizes as listed • Content: 62% polyester, 38% rubber • Lighter than woven elastic but still strong enough to be used for waistbands, slipcovers, drapery, tire covers, boat covers, or to hold cushions on furniture and for a variety of apparel applications. • Shrinkage: 10%, Stretch: 125%

122

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


1” Woven Elastic White

ELA

Elastics

WO

Woven

4253

• Price Breaks: Each / 5 • Unit of measure: 55 yard/50 m roll • Content: 84% polyester, 16% rubber • Heavy Use Elastic • Stronger elastic for heavy duty applications such as suspenders, sports equipment (masks, elbow pads, etc.), equestrian applications (horse boots), bag straps for packs, wrist bands, orthotics (splints and supports) and more. Use wherever a strong memory elastic is required. Weaving reduces the shrinkage to about 3%. • Shrinkage: 3%, Stretch: 80%

1” Woven Elastic Black 4254

1½” Woven Elastic Black 4256

2” Woven Elastic Black 4258rer cilisi

3” Woven Elastic Black 4260

• Price Breaks: Each / 5 • Unit of measure: 55 yard/50 m roll • Content: 84% polyester, 16% rubber • Same strong elastic as the white listed above. Same specifications and applications apply. • Shrinkage: 3%, Stretch: 80%

Visit www.jennisfabrics.com

123


FAS

Fasteners

Properties

Properties of Materials used for Fasteners Steel: An alloy created by the addition of a small percentage (<2%) of carbon to iron. This tiny amount of carbon adds great strength and hardness. Steel conducts electricity and is magnetic. It is prone to rusting (oxidation) if not coated with other metals. Stainless Steel: One of a family of alloyed steels containing 10 - 30% chromium and other metals. When used with low carbon content, chromium imparts remarkable resistance to corrosion and heat. Often other elements such as nickel are added to increase resistance to oxidation. Stainless steel in fittings should be passive or coated to prevent active oxidation. When this coating is scratched, the stainless steel will react with oxygen to allow oxidation to occur. This is a â&#x20AC;&#x153;re-sealingâ&#x20AC;? action. Nickel: A strong and corrosive resistant metal. Nickel is magnetic and can be polished to a brilliant sheen. Used widely for plating and in the manufacturing of stainless steel. Titanium is the only other alloy better in galvanic corrosion (seawater) resistance. Chromium: Hard, steel grey metal that can be polished to a bright sheen. Component of stainless steel due to its excellent anticorrosion characteristics. It is magnetic and also used as a corrosion resistant coating. Brass: An alloy created from copper and zinc. It will not rust in water although the zinc alloy will eventually oxidize. Non magnetic once the zinc has oxidized, the remaining copper may become soft over time. Zinc: A metal of only moderate hardness, used with copper to create brass. The main application of zinc is as a coating for the protection of steel against corrosion. Zinc itself forms an impervious coating on exposure to the atmospheres that iron, and therefore corrodes at a much lower rate. In addition, because zinc tends to oxidize in presence of iron, some protection is afforded the steel surface even if some of it is exposed through cracks. It is intended to oxidize to give protection in stainless steel. Electroplating of zinc to iron is called galvanizing. Aluminum: Weighs about 1/3 of an equal volume of steel. It is non-magnetic, corrosion resistant in freshwater, an excellent conductor of heat and electricity, reflects both light and heat and is easily formed. If not properly anodized, aluminum will oxidize with saltwater exposure. Delrin (nylon): An acetal resin compound widely referred to as a nylon or plastic. Cast into high impact, water impervious forms. Excellent corrosion resistance. When used in zippers, provides a degree of self lubrication. Finish is normally cast in and will not require polishing or wear off. Delrin (nylon) is unaffected by sea or freshwater, however, in ultimate strength it is not as strong as metals and is subject to UV ray deterioration over long periods of time. It is well suited to most applications where strength is not the critical factor, such as garments, bags and marine fittings for use in sporting applications. Casting: The process of pouring molten metals or plastics into dies and allowing them to harden. Die casting involves injecting the molten material under pressure and allows much greater precision. Corrosion: a) Galvanic Corrosion: The reduction of an alloy by chemical reaction with local electrolyte, in most cases saltwater (and to much lesser degree, freshwater). Any time two different metals are submerged in an electrolyte, one will act as an anode, the other as a cathode: the anode (less noble) metal will be attacked and gradually destroyed; deposits of its components may appear in the cathode (more noble) metal. b) Oxidation or Rust: The removal of metallic elements resulting in stable compounds such as iron oxide (rust). Corrosion compounds form on the surface of a solid material. If the compounds are hard and impenetrable (such as those in zinc) the progress of the corrosion is arrested. If the compound is loose and porous, such as iron, corrosion proceeds swiftly and continuously. Metal Plating: The precess of applying a metallic coating to another material. Normally used to enhance corrosion resistance or appearance. Nickel plating is one of the most common; when combined with an underlayer of chromium, it provides a bright shiny surface that is corrosion free and resistant to wear. It is used over steel, brass, zinc and aluminum, as well as some kinds of chemically metallized plastic. Nickle plating conducts electricity, is long lasting, very hard and corrosion resistant.

Alternative Fastener Solutions See the following items for time saving alternatives to traditional snaps: Quick-Fit temporary reusable snap system Canvas Clip system for holding fabric in place while fitting Reusable slide in Tarp Clip for customizing tarps without grommetting Rubberlike Snap Ring Washer that protects surface and fasteners Lift-the-Dot and Pull-the-Dot systems that are extremely strong

124

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


FAS

Fasteners

CO

Common Sense

Dot® Metal Common Sense Fasteners A premium line of common sense fasteners from a name you know and trust. Reliable, rustproof fasteners for boats, tents and awning applications among others. Strong and sturdy nickle plated brass construction for long life. Common Sense turn fasteners in nickel plated brass. These fasteners offer excellent corrosion resistance for outdoor applications and are frequently found on boats, truck fronts, convertible tops, etc.

Dot® Common Sense Double Stud 3109 • Price Breaks: Package / 10 • Unit of measure: Package of 100 • An economical line of Common Sense turn fasteners in nickel plated brass. These fasteners offer excellent corrosion resistance for outdoor applications and are frequently found on boats, truck fronts, convertible tops, etc. • Turn fastener found on winter fronts and boats with two screw base with a longer neck allowing 2 eyelets or heavier materials to be placed over the head. Can be attached using two rivets or screws, or in fabric using two posts (#4007).

Dot® Common Sense Single Stud 4050 • Price Breaks: Package / 10 • Unit of measure: Package of 100 • Positive locking stud with a two screw mounting base. Stud is brass spring loaded to prevent accidental opening.

Visit www.jennisfabrics.com

125


FAS

Fasteners

CO

Common Sense

Dot® Two Prong Stud 4052

Dot® Clinch Plate 4054

Dot® Washer 4058

• Price Breaks: Package / 10

• Price Breaks: Package / 10

• Price Breaks: Package / 10

• Price Breaks: Package / 10

• Unit of measure: Package of 100

• Unit of measure: Package of 100

• Unit of measure: Package of 100

• Unit of measure: Package of 100

• Works with #4054 (sold separately) to clinch Dot® stud fastener into material

• Works with #4052 (sold separately) to clinch Dot® stud fastener into material

• Works with #4058 (sold separately)

• Works with #4056 (sold separately)

TOO

Tools

FA

Fasteners #450 Common Sense Cutter 3111

126

Dot® Prong Eyelet 4056olorer cilisi

#171 Common Sense Cutter / 410 3113

Common Sense E-Z Hand Cutter 3117oer cilisi

Steel Hole Punch for Turn fasteners 3128

• Price Breaks: Each

• Price Breaks: Each

• Price Breaks: Each

• Price Breaks: Each

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure:: Each

• Unit of measure: Each

• Punch for Common Sense eyelets. Cast alloy with hardened steel pins and cutter.

• Content: Steel

• Hand die cutter for common sense eyelets.

• Content: Steel

• Cutter for Common Sense clinch plate fastener.

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS

• Steel punch for the Plastic Common Sense Fasteners. Toughened for long life.


FAS

Fasteners

CO

Common Sense

Plastic Common Sense Fasteners Impervious and strong plastic compound fasteners, in Delrin (nylon) acetyl resin compound. Unaffected by moisture or humidity, will withstand extreme temperatures. These products have a proven track record in the winter front industry.

Plastic Turn Stud Black 3120

Plastic Turn Stud White 3121

• Price Breaks: Package / 10 • Unit of measure: Package of 100 • Content: Delrin (nylon) • Two hole mounting Delrin (nylon) stud fastener. Can be riveted or screwed into place, or mount into fabric with the plate below. Can be set with two Dura Snap posts.

Plastic Back Plate for Stud Black

3122

Plastic Back Plate for Stud White

3123

• Price Breaks: Package / 10 • Unit of measure: Package of 100 • Content: Delrin (nylon) • Backing plate for the stud listed above. Use to attach a stud where rivets or screws would pull through. Can be riveted, or attached with two Dura Snap posts.

Visit www.jennisfabrics.com

127


FAS

Fasteners

CO

Common Sense

Plastic Turn Eyelet Black

3124

Plastic Turn Eyelet White 3125

• Price Breaks: Package / 10 • Unit of measure: Package of 100 • Content: Delrin (nylon) • Plastic eyelet plate has serrated pins that extend into the washer listed below.

Plastic Washer Plate Black

3126

Plastic Washer Plate White

3127

• Price Breaks: Package / 10 • Unit of measure: Package of 100 • Content: Delrin (nylon) • Self locking plate for the eyelets; just push and the pins are locked into the plate.

128

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


/8” Aluminum Rivets 1/16 -1/8” 6640 1

/8” Aluminum Rivets 3/16 -¼” 6645 1

FAS

Fasteners

RI

Rivets

/8” Aluminum Rivets 5/16 -3/8” 6650lorer cilisi 1

• Price Breaks: Box / 5 • Unit of measure: Box of 500 • All aluminum rivets will not rust. Ideal for use in marine and exposed situations where corrosion is a concern. The size of ⅛” (0.32 cm) refers to the rivet head diameter. The numbers following the description are the grip ranges or depth of the rivet. This is an important number to consider because if the rivet is too short it will not mushroom the head properly, and if too long the assembly will be loose.

/8” Aluminum/ Steel Rivets 1/16 -1/8” 6655 1

/8” Aluminum/ Steel Rivets 3/16 -¼” 6660 1

/8” Aluminum/ Steel Rivets 5/16 -3/8” 6665orer cilisi 1

• Price Breaks: Box / 5 • Unit of measure: Box of 500 • Aluminum rivets with steel mandrel for greater strength than the aluminum mandrel as listed above. Steel may eventually corrode in humid environments, but gives a much greater strength. Grip range (depth) measurements are listed at the end of each description. This is an important number to consider because if the rivet is too short it will not mushroom the head properly, and if too long the assembly will be loose.

Snap Ring Washer

3950

• Price Breaks: Package / 10 / 50 • Unit of measure: Package of 100 • Protect Paint from scratching, fiberglass from cracking, ensure a tight fit with this light ring washer that locks, seals and protects. • Don’t reach for a fastener unless you also reach for a snap ring washer. This remarkable clear, rubbery little washer slides onto a screw or rivet and “front-seals” the unit in place. The studs dig into it to prevent loosening or rattling and the surface is protected. Cost is less than a dollar to do all the studs on a tonneau cover and the benefits last the life of the stud. Use it anywhere you attach fasteners.

Visit www.jennisfabrics.com

129


TOO

Tools

RI

Rivets Hand Rivet Gun

6635 • Price Breaks: Each • Unit of measure: Each • Plier type rivet gun with different heads for different diameters of rivets. Easy one hand operation, you can place the rivet into the tool and then position it in the job. Squeezing the handle causes the teeth inside the tool to extract the mandrel, which mushrooms the rivet (as in sketch).

FAS

Fasteners

SC

Screws

#8 Wood Screws

• Price Breaks: Box / 5 • Unit of measure: Box of 100 • Content: Zinc plated steel • #8 wood screws with a tapered Robertson (square) head for use in furniture frame construction or repair, or anywhere positive joining of wood pieces is required.

#8 ¾” Wood Screws #8 1” Wood Screws #8 1¼” Wood Screws #8 1½” Wood Screws ¾” 1.91 cm

1” 2.54 cm

1¼” 3.18 cm

1½” 3.81 cm

7040 7043 7044 7045

1¾” 4.45 cm

#8 1¾” Wood Screws #8 2” Wood Screws #8 2¼” Wood Screws #8 2½” Wood Screws 2” 5.08 cm

2¼” 5.72 cm

TO SCALE

130

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS

7046 7047 7048 7049 2½” 6.35 cm


#10 Wood Screws

FAS

Fasteners

SC

Screws

• Price Breaks: Box / 5 • Unit of measure: Box of 100 • #10 wood screws with a tapered Robertson (square) head for use in furniture frame construction or repair, or anywhere positive joining of wood pieces is required.

#10 ¾” Wood Screws #10 1” Wood Screws #10 1¼” Wood Screws #10 1½” Wood Screws

7051 7052 7053 7054

#10 1¾” Wood Screws 7055 #10 2” Wood Screws 7056 #10 2¼” Wood Screws 7057 #10 2½” Wood Screws 7058

#6 Washers

#8 Washers

#10 Washers

9881

9882

9883orer cilisi

• Price Breaks: Package / 5 • Unit of measure: Package of 100 • Bright nickel plated washers for use with common size screws as found in automotive and marine applications. Can be used anywhere to spread the pressure of the screw head over a larger area and prevent cracking or stress. Taper neck screws such as wood screws sit flush with the top of the washer.

Visit www.jennisfabrics.com

131


FAS

Fasteners

KI

Kits Canvas Care Kit

4040 • Price Breaks: Each / 10 • Unit of measure: Each • Entretien et réparation des boutons-pression de votre bâche. • Le Canvas Care Kit contient: un outil pour bouton-pression, un lubrifiant pour bouton-pression, des boutons-pression supplémentaires, et un boîtier pratique pour le transport.

Display Pack for Top Snapper and Canvas Care Kit

4041 • Price Breaks: Each • Unit of measure: Each • Retail display for 4 Top Snapper tools (#4038) and 4 Canvas Care Kits (#4040). Easily display for walk in traffic.

FAS

Fasteners

DB

Dura Snap Brass

Nickel Plated Brass Dura Snap Fasteners A heavy duty button style fastener. Socket construction assures a firm grip which is maintained throughout use. Used in sports clothing, protective outerwear, automotive accessories, luggage, leather goods and marine trades. A wide variety of options are covered with the styles and contents that are available.

132

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


Dura Snap Standard Cap 4001

Dura Snap Cap Black 4002

FAS

Fasteners

DB

Dura Snap Brass

Dura Snap Long Barrel Cap 4000rer cilisi

• Price Breaks: Package / 20 / 60 • Unit of measure: Package of 100 • The standard cap for use with the socket #4003 to create one half of the Dura Snap system. Diameter of the button or cap is 9/16” (1.43 cm).

Dura Snap Plastic Cap Black 3960

Dura Snap Plastic Cap White 3964

Dura Snap Plastic Cap Grey 3968rer cilisi

Dura Snap Plastic Cap Navy Blue 3976

• Price Breaks: Package / 20 / 60 • Unit of measure: Package of 100 • Solid nylon top won’t chip or fade. Ideal for color matching to Sunbrella® products.

Dura Snap Socket

4003

• Price Breaks: Package / 20 / 60 • Unit of measure: Package of 100 • Standard socket for use with all the caps listed above. Attaches to any of the studs listed on the next page.

Visit www.jennisfabrics.com

133


FAS

Fasteners

DB

Dura Snap Brass

Dura Snap Stud: Combination 4004

Dura Snap Post: Standard 4007

• Price Breaks: Package / 20 /60 • Unit of measure: Package of 100 • Combination stud that offers versatility and will work in most applications.

/8” Steel Screw Stud

3

Dura Snap Post: Long 3995lorer cilisi

• Price Breaks: Package / 20 /60

• Price Breaks: Package / 20 /60

• Unit of measure: Package of 100

• Unit of measure: Package of 100

4020

/8” Steel Screw Stud

5

4021

• Price Breaks: Package / 10 • Unit of measure: Package of 100 • Steel screw with a nickel plated brass head.

FAS

Fasteners

DP

Disk & Prong

Brass Disc #1387

13017

Brass Prong #1380

13018

• Price Breaks: Package / 10 • Unit of measure: #13017: Package of 1000 #13018: Package of 500 • New style discs and prongs with slightly larger dimensions with make installation of rings to awnings easier.

134

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


FAS

Fasteners

DS

Dura Snap Steel

Apparel Nickel Plated Steel Dura Snap Fasteners Nickel plated steel Dura Snap fasteners are very strong and durable. They are ideal for garment, luggage, sports bags and apparel as well as applications on automotive and aircraft projects. Part #11001 is polished to a bright finish. Due to their steel content, we do not recommend these fasteners for marine applications. Use the nickel plated brass fastener lines starting on page 134 instead.

Dura Snap Steel Cap Nickel

11001

Dura Snap Steel Cap Black

11003

• Price Breaks: Package / 20 / 60 • Unit of measure: Package of 100 • Caps used with socket #11007.

Dura Snap Steel Socket 11007

Dura Snap Steel Stud 11009

Dura Snap Steel Post 11011

• Price Breaks: Package / 20 / 60

• Price Breaks: Package / 20 / 60

• Price Breaks: Package / 20 / 60

• Unit of measure: Package of 100

• Unit of measure: Package of 100

• Unit of measure: Package of 100

• For use with #11011.

• For use with part #11009.

• Nickel plated brass steel Dura Snap fasteners are very strong and durable. Polished to a bright finish.

Visit www.jennisfabrics.com

135


FAS

Fasteners

DS

Dura Snap SS 3

/8” Dura Snap Screw Stud SS 4008 • Price Breaks: Package / 10 • Unit of measure: Package of 100 • Nickel plated brass stud with a stainless steel, Philips head, self tapping screw.

Dura Snap Cap SS 4010

Dura Snap Socket SS 4012

Dura Snap Stud SS 4014oer cilisi

Dura Snap Post SS 4015

• Price Breaks: Package / 10 / 20

• Price Breaks: Package / 10 / 20

• Price Breaks: Package / 10 / 20

• Price Breaks: Package / 10 / 20

• Unit of measure: Package of 100

• Unit of measure: Package of 100

• Unit of measure: Package of 100

• Unit of measure: Package of 100

FAS

Fasteners

GY

Gypsy

Gypsy Stud

11012 • Price Breaks: Package / 10 • Unit of measure: Package of 1000 • Used when attaching stud to screw stud for stacking or double layering material.

136

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


FAS

Fasteners

DO

Dot® Durable

Nickel Plated Brass Dot® Durable Fasteners Quality Dot® brand Durable™ heavy duty fasteners. The Dot® brand is self-piercing and can be attached without pre-punching. Button diameter is 9/16” (1.43 cm), compatible with all Dura Snap parts and tools. A reliable, rustproof fastener of nickel plated brass from a name you can trust.

Dot® Durable Fasteners Cap • Price Breaks: Package / 10 • Unit of measure: Package of 100 • Standard Durable™ caps with 11/64” (0.45 cm) barrel length. Self piercing and requires no punching in most applications. Diameter of cap is 9/16” (1.43 cm).

Nickel Plated White Black

Dot® Durable Fasteners Stud Low 4076

4070 4060 4062

Burgundy Pacific Blue Navy Blue

Dot® Durable Flangelss Stud 4077

4064 4066 4068

Dot® Durable Fastener Stud 7/16” 4078oer cilisi

Dot® Durable Fastener Stud 5/8” 4080

• Price Breaks: Package / 10

• Price Breaks: Package / 10

• Price Breaks: Package / 10

• Price Breaks: Package / 10

• Unit of measure: Package of 100

• Unit of measure: Package of 100

• Unit of measure: Package of 100

• Unit of measure: Package of 100

Visit www.jennisfabrics.com

137


FAS

Fasteners

DO

Dot® Durable

Dot® Durable Fastener Eyelet ¼” 4082

Dot® Durable Fastener Eyelet 5/16” 4084

Dot® Durable Fastener Stud Regular 4074lorer cilisi

• Price Breaks: Package / 10

• Price Breaks: Package / 10

• Price Breaks: Package / 10

• Unit of measure: Package of 100

• Unit of measure: Package of 100

• Unit of measure: Package of 100

Dot® Durable Fasteners Socket

4072

Dot® Durable Hard Action Socket 4073

• Price Breaks: Package / 10 • Unit of measure: Package of 100

Dot® Durable ¾” Molding Clip

4086

4088 Dot® Durable 7/8” Molding Clip

• Price Breaks: Package / 10 • Unit of measure: Package of 100 • Molding clips attach directly to windshield frames on boats.

138

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


FAS

Fasteners

BB

Baby Dura Snap

Nickel Plated Brass Baby Dura Snap Fasteners The same great system in a smaller snap. Baby Dura Snap fasteners have a diameter of approximately ½” (0.51 cm) as compared to the standard Dura Snap 9/16” (1.43 cm). These can be set using the Press-n-Snap tool or PM-1 machine with the optional use of Baby Snap dies.

Baby Dura Snap Cap Nickel 3996

Baby Dura Snap Cap Black Metal 3992

• Price Breaks: Package / 20 / 60 • Unit of measure: Package of 100 • Baby Dura Snap fastener caps in 2 different metal finishes. Manufactured from brass and plated in nickel before the finish is applied.

Baby Dura Snap Socket 3997

Baby Dura Snap Stud 3998

Baby Dura Snap Post 3999er cilisi

• Price Breaks: Package / 20 / 60

• Price Breaks: Package / 20 / 60

• Price Breaks: Package / 20 / 60

• Unit of measure: Package of 100

• Unit of measure: Package of 100

• Unit of measure: Package of 100

• Nickel plated brass socket to go with the caps below. Socket design holds firmly for the life of the fastener.

Visit www.jennisfabrics.com

139


FAS

Fasteners

PU

Pull-the-Dot

Pull-the-Dot Fastener Button 4090

Pull-the-Dot Socket 4092

Pull-the-Dot Stud Clinch 4094lorer cilisi

Pull-the-Dot Screw Stud 4096

• Price Breaks: Package / 10

• Price Breaks: Package / 10

• Price Breaks: Package / 10

• Price Breaks: Package / 10

• Unit of measure: Package of 100

• Unit of measure: Package of 100

• Unit of measure: Package of 100

• Unit of measure: Package of 100

Pull-the-Dot The Pull-the-Dot fastener is a carefully engineered, three sided locking snap fastener. Because of its unique built in locking feature, this fastener will withstand extreme pressure on three sides without unlocking, yet release instantly on the fourth side if you pull the dot embossed on the surface of the cap. Made of nickel plated brass. Requires own set of tools and dies for installing.

FAS

Fasteners

DO

Dot Durable

Dot® Durable Fastener Eyelet ¼”

4082

Dot® Durable Fastener Eyelet 5/16”

4084

• Price Breaks: Package / 10 • Unit of measure: Package of 100 • Note: These two Dot® Durable nickel plated brass posts can be used with #4094 Pullthe-Dot stud.

140

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


FAS

Fasteners

LI

Lift-the-Dot

Lift-the-Dot The Lift-the-Dot is a heavy duty fastener from the Dot® family. Like the Pull-the-Dot, it locks on three sides and is easily released from the fourth (which is marked with a dot). Frequently found on automotive and marine applications, it is suitable for use anywhere that a secure fastener is required. Content is nickel plated brass. It has its own set of tools and dies for installing.

Lift-the-Dot Socket 4011

Lift-the-Dot Clinch Plate 4013

Life-the-Dot Stud Washer 4019oer cilisi

Lift-the-Dot Stud 2 Prong 4018

• Price Breaks: Package / 10

• Price Breaks: Package / 10

• Price Breaks: Package / 10

• Price Breaks: Package / 10

• Unit of measure: Package of 100

• Unit of measure: Package of 100

• Unit of measure: Package of 100

• Unit of measure: Package of 100

/8” Lift-the-Dot Screw Stud SS/Brass 4017 5

/8” Lift-the-Dot Screw Stud Brass 4069 5

/16” Screw Stud 7153-1 4059 cilisi 11

• Price Breaks: Package / 10

• Price Breaks: Package / 10

• Price Breaks: Package / 10

• Unit of measure: Package of 100

• Unit of measure: Package of 100

• Unit of measure: Package of 100 • Fastener stud with nut and bolt for mounting. ⅛” hole required to mount into hard surfaces. Thread depth is 11/16”.

Visit www.jennisfabrics.com

141


TOO

Tools

FA

Fasteners PM-1Dura Snap Machine 4030 • Price Breaks: Each • Unit of measure: Each • For high production with less fatigue, we offer the PM-1 Dura Snap bench mounted press. Sturdy unit sets snaps quickly and easily with a single stroke. Includes a complete set of dies for Dot® Durable and Dura Snap fasteners. This machine must be bolted to the workbench. It is not portable and has a tendency to crack if not solidly mounted.

Replacement Dies for PM-1/PM-5 4026

Baby Dura Snap Die Set for PM-1 4036

• Price Breaks: Set • Unit of measure: Set of 4 • The replacement set of 4 dies for Dura Snap fasteners for the bench press PM-1 machine are available by themselves or “baby” size.

Anvil Die for Eyelet 4023

142

Anvil Die for Button 4024

Dura Snap Setting Punch 4022er cilisi

/8” Hole Punch

1

4025

• Price Breaks: Each

• Price Breaks: Each

• Price Breaks: Each

• Price Breaks: Each

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure:: Each

• Unit of measure: Each

• Allows you to set Dura Snap and Dot Durable fasteners into any material. Use with #4022 and #4025.

• Allows you to set Dura Snap and Dot Durable fasteners into any material. Use with #4022 and #4025.

• To set Dura Snap and Dot® Durable fasteners into any material. Set dies anywhere you can reach.

• To set Dura Snap and Dot® Durable fasteners into any material. Set dies anywhere you can reach.

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


TOO

Tools

FA

Fasteners

Press-n-Snap Hand Tool 4029 • Price Breaks: Each • Unit of measure: Each • Plier Style Setting Die for Dura Snap • This lightweight aluminum tool sets snaps into place with a simple squeeze. Ideal for tarping, convertible top, tents, boat covers and canvas jobs. Each unit comes complete with setting dies for Dot durable and Dura Snap type fasteners. A rubber ring holds one part of the fastener, for one handed operation. Dies are also available for Baby Dot® fasteners. It is also possible to replace the rubber ring separately.

Regular Dura Snap Dies

4027

Baby Dura Snap Dies

4034

• Price Breaks: Each • Unit of measure: Set of 4 • Replace worn or lost dies, or stock a set of dies to use with the Baby Dura Snap system of slightly smaller durable snap fasteners. Set of 4 dies. For use with the Press-n-Snap hand tool.

Rubber Ring for Press-n-Snap

4028

• Price Breaks: Each • Unit of measure: Each • The rubber rim that holds one half of the fastener into the top die of the Press-n-Snap can wear out with time. Keep a replacement on hand.

Visit www.jennisfabrics.com

143


TOO

Tools

FA

Fasteners Lift-a-Dot Punch

4016 • Price Breaks: Each • Unit of measure: Each • All steel punch specially created for setting in the #4011 Lift-the-Dot fastener.

Lift-a-Dot E-Z Hand Cutter

3115 • Price Breaks: Each • Unit of measure: Each • Sharp, precise hand cutting tool for setting the Lift-the-Dot fastener eyelet and clinch plate into fabrics. 1⅞” (4.8 cm) deep throat, finger guard and plastic coated handles make this tool easy and safe to use.

144

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


StayPut Shock Cord Clip White 1700

FAS

Fasteners

ST

StayPut

StayPut Shock Cord Clip Black 1701

• Price Breaks: Each / 25 • Unit of measure: Each • Stayput shock cord clip with 6mm shock cord with brass crimped ends (3 parts). Simple installation in varying thicknesses of fabric without the need for special tools, only a ¼” hole in fabric.

StayPut Knob White

1706

StayPut Knob Black

1703

• Price Breaks: Each / 25 • Unit of measure: Each • Use with Stayput Shock Cord Clip (#1700 and #1701). Accepts 6 mm Shock Cord. The knob is extremely strong with a smooth and rounded matte finish.

StayPut Tent Wall Hook White

1704

StayPut Tent Wall Hook Black

1705

• Price Breaks: Each / 25 • Unit of measure: Each • Use with Stayput Shock Cord Clip (#1700 and #1701). Designed not to jump off rope and is always in the upright position. Fixed directly to the fabric through a ¼” hole. Uses a backing plug and does not require the use of an eyelet or any special tools.

Visit www.jennisfabrics.com

145


FAS

Fasteners

ST

StayPut StayPut Shock Cord Hook White 1711

StayPut Shock Cord Hook Black 1712

• Price Breaks: Each / 25 • Unit of measure: Each • Has smooth rounded surfaces with no sharp edges to cut into ropes or shock cords. The narrow opening at the end of the hook allows rope or cord to snap into position reducing the chance of slipping out of it or becoming slack, particularly when using rope.

StayPut Shock Cord Pull White

StayPut Shock Cord Pull Black

1718

1719

• Price Breaks: Each / 25 • Unit of measure: Each • Fasten to shock cord clip to make it easier to fasten and release shock cords from hooks.

StayPut Vertical Single Stud 1708

146

StayPut Horizontal Single Stud 1709

StayPut Curved Base Insert 1710er cilisi

StayPut Keder Bullet 1713

• Price Breaks: Each / 25

• Price Breaks: Each / 25

• Price Breaks: Each / 25

• Price Breaks: Each / 25

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure:: Each

• Unit of measure: Each

• Designed to attach fabric to almost any structure.

• Designed to attach fabric to almost any structure.

• Use with #1708 and #1709 to provide a snug fit on 22-25 mm tubing, such as bimini tops and railing.

• Use in the ends of the keder welting (#9420 and #9425) makes it easier to feed keder tops, fast and easy to install.

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


Inflatable Boat Cover Hook 1”

FAS

Fasteners

ST

StayPut

1707

• Price Breaks: Each / 25 • Unit of measure: Each • Run your inflatable boat cover shock cord through the sleeve of hook.

/8” Screw Stud SS

/8” Screw Stud SS

½” Screw Stud SS

5

3

13000

13001

13002orer cilisi

• Price Breaks: Package / 10 • Unit of measure: Package of 100 • Screw the stud into the side of your boat and snap your boat tip straight onto the stud.

Stik-A-Stud Fastener

4099

• Price Breaks: Each / 25 / 100 • Unit of measure: Each • Drilling Holes a Problem? • A delrin (nylon) compound molded stud with an extremely aggressive 3M adhesive tap backing. Can be applied to any clean, non porous surface indoors or out. Save time with this versatile product. The adhesive is extremely effective on a properly cleaned metal or fiberglass surface. Can be removed without damage by just applying an alcohol solution to the edge of the stud.

Visit www.jennisfabrics.com

147


FAS

Fasteners

TO

Tools StayPut Shock Cord Tool (3 pieces) 1720 • Price Breaks: Each • Unit of measure: Each • 3 pieces that allow assembly and removal of the Stayput Fasteners. You get one pair of setting dies for use in the Press-n-Snap hand tool for installation of the Stayput Fasteners, and a recessed die for use with any standard ⅛” punch to separate the pieces after installation.

StayPut How To SQS= Simple, Quick, Strong. The StayPut fasteners unique design provides a superior and reliable fastening system without the need for springs or pressure to remain closed. They are made from the highest quality of UV stable nylon composite. Resistant to corrosion and will provide many years of trouble free operation, particularly in a marine environment. Also used for tents, awnings and covers just to name a few uses. The StayPut line features fasteners to hang fabric from flat surfaces as well a curved surface and still hold the fabric snug. Also available are Shock Cord clips, that can be used for repair or replacement of existing fasteners. The Shock Cord Clip allows for easy boat top and cover installation especially when used with the Shock Cord Pulls. The Spincut tools will fit any regular drill and make installing StayPut fasteners easy and fast. Many OEM boats feature one or more of the StayPut fasteners.

148

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


StayPut Keder Bullet Drill Guide 11 mm 1714

TOO

Tools

FA

Fasteners

StayPut Keder Bullet Drill Guide 13 mm 1715

• Price Breaks: Each • Unit of measure: Each • Drill guide to use with keder bullet and keder welting. Holds the keder welting in place for more accurate and safer drilling of the pilot hole for the keder bullet. 100% steel.

StayPut Spincut 3/8” Hole Kit 1716

StayPut Spincut 7/16” Hole Kit 1717

• Price Breaks: Each • Unit of measure: Each • The Stayput Spin Cut is designed to simplify making holes in fabric. Consists of the Spincut tool and the nylon (HDPE) cutting board. No need to have a hammer, die and block of wood to create holes in fabrics and webbings. Simply insert the Stayput Spincut tool into a power drill and hold the nylon cutting board behind the fabric. Activate the drill and gently push into the fabric, the tool does all the work in creating a clean, neat hole.

StayPut Spincut ¼”

1702

• Price Breaks: Each • Unit of measure: Each • No need to have a hammer, die and block of wood to create holes in fabrics and webbings. Simply insert the Stayput Spincut tool into a power drill and hold the nylon cutting board behind the fabric. Activate the drill and gently push into the fabric, the tool does all the work in creating a clean, neat hole.

Visit www.jennisfabrics.com

149


FAS

Fasteners

QU

Quick-Fit

Quick-Fit Holding Cap 3931 • Price Breaks: Package / 10 • Unit of measure: Package of 10 • For Speed & Accuracy in Fitting: Temporary Reusable Snaps • Quick-Fit holding tools are temporary snap fasteners that can be used to hold materials in place. Great for fitting or holding paper or plastic when making a pattern. When you’re done, pop them off and the small hole left will allow exact placement of permanent fasteners. Fits any standard Dura Snap stud. For the tool used to remove these items see next page for #3935.

Quick-Fit Holding Prong

3933 • Price Breaks: Package / 10 • Unit of measure: Package of 10

150

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


3” Chrome Sample Book Ring

6500

FAS

Fasteners

SA

Sample

6” Chrome Sample Book Ring 6510

• Price Breaks: Each • Unit of measure: Each • Bright chrome finish rings with locking threaded closure for use in sample books and other applications. Available in 3” (7.6 cm) or 6” (15.2 cm) diameters. Use handle below to create a portable ring book.

10” Chrome Sample Book Handles 6520 • Price Breaks: Each / 25 / 175 • Unit of measure: Each • Sturdy chrome handle to go with 3” and 6” rings listed above. 10” (25.4 cm) spacing.

8” Hanger with Metal Hook Black

6514

• Price Breaks: Each / 100 / 200 • Unit of measure: Each • Sturdy plastic hangers with metal hooks and clips

Visit www.jennisfabrics.com

151


FAS

Fasteners

IN

Industrial Marine Top Clip for 1” & 7/8” tube 2460

• Price Breaks: Each / 25 • Unit of measure: Each • A canvas makers tool used by craftsmen to secure fabric to a frame during the fitting process. Applied and removed easily. Will not tear or puncture fabric. No spring clamps to squeeze, just snap on and off with on hand. Makes awkward fitting jobs a thing of the past. • Inside diameter 1” (2.54 cm) and ⅞” (2.22 cm).

Temporary Clip Holds Canvas to Frames

1”

⅞”

Slide In Tarp Clip

Fabric Pipe

6070 • Price Breaks: Each / 25 / 100 • Unit of measure: Each • Slide in two piece design allows you to place a clip for tying or hooking anywhere on a tarp. The tapered design means the more pressure you apply, the tighter it holds. A great versatile tool that allows the use of one tarp for many purposes, and you can apply the clip where it is needed to simplify securing the tarp.

152

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


Quick-Fit Release Tool

TOO

Tools

QU

Quick-Fit

FAS

Fasteners

KL

Klip

3935

• Price Breaks: Each • Unit of measure: Each • Simple tool releases Quick-Fit temporary snaps. With a twist of the wrist they are ready to use again and again.

Easy Klip Mini

11050

• Price Breaks: Each / 25 • Unit of measure: Each • Wedge-lock designed clip that actually tightens the clips grip as it is pulled tighter on when the load increases. EasyKlips’ fantastic grip is created by wedging the fabric, avoiding the need for a hem, and performs efficiently on fabrics such as tarps, polyethylene sheeting, netting and recreational matting. EasyKlip is used by professionals worldwide where an instant, reliable fixing point is needed. A multipurpose grip clip for 150lbs. (68 kg).

Visit www.jennisfabrics.com

153


FIT

Fittings

AL

Aluminum

Littco Aluminum Awning Fittings The aluminum fittings listed here have a primary application in the construction of awnings. While many of the parts appear similar to their counterparts in the boat top trade, they tend to be larger castings and in many cases are not as well finished as the equivalent marine parts. Our line of awning fittings is made in North America by Littco, the leader in awning and marine casting. The aluminum hardware is cast from alloys that are best suited to each part’s application. All parts have a smooth surface with a bright finish. Set screws, hinge screws, bolts and nuts are of stainless steel unless otherwise indicated. Note: Measurements for each fitting are based on the pipe sizes of schedule 40 pipe which are measured by the inside diameter. They are not the outside dimensions of the tube as with marine fittings.

Awning pipe is sized by the inside diameter.

Marine tubing is sized by the outside diameter.

¾” Upright Slip Tee

2354 • Price Breaks: Each / 10 • Unit of measure: Each • Upright slip tee for ¾” (1.9 cm) pipe with stainless steel lock screws. Inside diameter is 1⅜” (3.5 cm).

154

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


¾” Rafter Slip Tee

FIT

Fittings

AL

Aluminum

2358

• Price Breaks: Each / 10 • Unit of measure: Each • Rafter style slip tee for ¾” (1.9 cm) pipe with stainless steel lock screws. Inside diameter is 1⅜” (3.5 cm).

1” Combination Rafter/Slip Tee 2360

• Price Breaks: Each / 10 • Unit of measure: Each • Combination rafter tee and upright tee with offset that allows for individual or dual use. When used together as shown, it is adjustable up to a 90° rotation. Inside diameter is 1⅜” (3.5 cm).

¼” Slipfit Eye End

2361

½” Slipfit Eye End

2420

• Price Breaks: Each / 10 • Unit of measure: Each • Thin and light slip fit eye end for ¼” (0.6 cm) or ½” (1.3 cm) tubing with stainless steel lock screw. Inside diameters are: #2361: ½” (1.3 cm), #2420: ⅞” (2.2 cm).

Visit www.jennisfabrics.com

155


FIT

Fittings

AL

Aluminum ¾” Slipfit Eye End Heavy Duty 2364

1” Slipfit Eye End Heavy Duty 2366

• Price Breaks: Each / 10 • Unit of measure: Each • Heavy duty slip fit eye end with stainless steel lock screws, available to fit over 2 pipe sizes as listed. Inside diameters are: #2364: 1⅛” (2.9 cm), #2366: 1⅜” (3.5 cm).

¾” Threaded Eye End

2396 • Price Breaks: Each / 10 • Unit of measure: Each • Eye end threaded to accept one size of pipe. Spin on and tighten. Inside diameter: 1” (2.54 cm).

¾” x ¾” Front Bar Clamp

2378

1” x 1” Front Bar Clamp

2380

• Price Breaks: Each / 10 • Unit of measure: Each • Slip fit ¾” (1.9 cm) or 1” (2.54 cm) piping into the bar clamp and tighten the stainless steel set screw, then fit over the same size tubing and lock with the set screw. Inside diameters: #2378: 1⅛” x 1⅛” (2.9 x 2.9 cm), #2380: 1⅜” x 1⅜” (3.5 x 3.5 cm).

156

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


½” Pipe Clamp

2384

¾” Pipe Clamp

FIT

Fittings

AL

Aluminum

2386

½” Head Rod Clamp

2370

• Price Breaks: Each / 10 • Unit of measure: Each • Hinged clamps with stainless steel fasteners. Inside diameters are: #2384: ⅞” (2.2 cm), #2386: 1⅛” (2.9 cm).

/8” Head Rod Clamp

3

• Price Breaks: #2368: Each / 10

2368 #2370: Each / 5

• Unit of measure: Each • Attaches head rod of awnings to various building surfaces. Stainless steel fasteners.

½” Hookless Head Rod Clamp

2372

• Price Breaks: Each / 10 • Unit of measure: Each • ½” (1.3 cm) head rod clamp similar to above but without the hooks.

Visit www.jennisfabrics.com

157


FIT

Fittings

AL

Aluminum ½” Slipfit Elbow

2427 • Price Breaks: Each / 10 • Unit of measure: Each • 90° slip fit elbow with stainless steel securing screws for ½” (1.3 cm) pipes. Gusseted for extra strength. Inside diameter: ⅞” (2.2 cm)

¾” Projection Camel Back Hinge

2404

1” Projection Camel Back Hinge

2406

• Price Breaks: Each / 10 • Unit of measure: Each • Camel back hinges that move the pivot point out from the surface to allow full range of movement of eye ends. Projection distance given is from the mounting surface.

¾” Post Socket for Wood

2422

1” Post Socket for Wood

2424

• Price Breaks: Each / 10 • Unit of measure: Each • Post socket for mounting pipe into wood surfaces. Inside diameters are: #2422: 1⅛” (2.9 cm), #2424: 1⅜” (3.5 cm).

158

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


1” Post Socket for Brick

FIT

Fittings

AL

Aluminum

2425

• Price Breaks: Each / 10 • Unit of measure: Each • Post socket for mounting pipes securely into brick or stone surfaces. Inside diameter: 1⅜” (3.5 cm).

6” Cleat

2410

• Price Breaks: Each / 10 • Unit of measure: Each • Sturdy aluminum cleat with 2 countersunk mounting holes and ball ends for safety.

Visit www.jennisfabrics.com

159


FIT

Fittings

AW

Awning

16’ Aluminum Awning Rail 2771 • Price Breaks: Each / 10 • Unit of measure: 16 feet/4.88 m lengths • 6063 T5 anodized aluminum awning rail. • Mill finish aluminum awning rail in 16’ (4.88 m) lengths. Can be used with either cord or vinyl extruded welt (see next page) to hold covers in place. Ideal for truck tonneau covers. To scale below. 3 /16” (0.5 cm)

1¼” (3.2 cm) TO SCALE

2774

Plastic Awning Rail

• Price Breaks: Each / 10 • Unit of measure: 10 feet /3.05 m lengths • Smooth white, rigid PVC • Plastic awning rail in white delrin. 9/16” (1.4 cm) diameter.

7’6” Center Awning Rail

2777 • Price Breaks: Each / 10 • Unit of measure: 7’6”/2.29 m lengths • Smooth, white, PVC rigid extrusion. Non corrosive. Can be run around tight corners with the use of heat.

160

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


Vinyl Extruded Welt White

2773

FIT

Fittings

AW

Awning

Vinyl Extruded Welt Black 2781

• Price Breaks: Each / 5 • Unit of measure: 100 foot/30.48 m roll • Use in place of rope headers to eliminate binding and tearing of threads and fabric during use. Can be easily stitched to the cover fabric and fits cleanly into the awning rail listed on the previous page. Fast and easy, moves the stitching away from friction. 5 /16” diameter.

/32” Keder Welt Welded Flap White 9422

9

/32” Keder Welt Welded Flap Black 9423

9

/16” Keder Welt Welded Flap White 9424orer cilisi

5

/16” Keder Welt Welded Flap Black 9425

5

• Price Breaks: Each • Unit of measure: 110 yard/100.6 m roll • Heavy duty polyester welded to a cord of solid PVC material. Hard, but flexible and slippery track welting that slides easily. Effortlessly bends around curves. Awning welt with welded flap. For sewn applications. Available in standard weave, black or white, 2 sizes.

5

/16” Keder Welt - 2 Flap White

9420

5

/16” Keder Welt - 2 Flap Black

9421

• Price Breaks: Each • Unit of measure: 110 yard/100.6 m roll • Awning welt with regular 2 flap. For sewn or heat sealed applications. Available in standard weave, black or white. • Keder welting is designed specifically for use in outdoor tensile structures where strength and resistance to the elements are critical. A unique construction of heavy duty polyester fabric welded to a cord of solid PVC material, resulting in a hard, but flexible and slippery track welting that slides easily. Effortlessly bends around curves. Cord size with fabric: 8.5 mm, flap/flag width: 30 mm x weld width: 10 mm, useable weldable width: 20 mm.

Visit www.jennisfabrics.com

161


FIT

Fittings

AW

Awning

Awning Cover Welt

9426 • Price Breaks: Each / 4 • Unit of measure: 250 yard roll • ¼” (0.6 cm) diameter. 100% PVC awning cover welt cord. Welt for sewing in the edging of awning covers. Holds the cover in place once installed in awning roller tube and front valance.

FIT

Fittings

CH

Chrome

Chrome Marine Fittings The marine industry places specific requirements on different components. J. Ennis Fabrics offers a range of fittings manufactured in delrin, stainless steel, chrome plated zinc, nickel plated brass and aluminum. Everything required is available through J. Ennis Fabrics. Items include: fittings, tubing, track, channel plastics and other accessories. The tools to make the bimini top are also available. Refer to page 50 for a complete listing and explanation of materials used for marine fittings. For boats on fresh water lakes. Not recommended for salt water.

162

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


¾” Inside Eye End

2545

FIT

Fittings

CH

Chrome

/8” Inside Eye End

2525

/8” Outside Eye End

2547

7

• Price Breaks: Each / 25 • Unit of measure: Each • Content: Chrome plated die cast zinc • For boats on fresh water lakes.

¾” Outside Eye End

2546

7

• Price Breaks: Each / 25 • Unit of measure: Each • Content: Chrome plated die cast zinc • For boats on fresh water lakes.

¾” Jaw Slide

2625

7

/8” Jaw Slide

2605

• Price Breaks: Each / 25 • Unit of measure: Each • Content: Chrome plated die cast zinc • For boats on fresh water lakes.

Visit www.jennisfabrics.com

163


FIT

Fittings

CH

Chrome

Mounting Plate

Track Slide End Cap

Large Deck Hinge

10° Large Deck Hinge

2659

2685

2713olorer cilisi

2715

• Price Breaks: Package / 25

• Price Breaks: Package / 25

• Price Breaks: Package / 25

• Price Breaks: Package / 25

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

• Content: Chrome plated die cast zinc

• Content: Chrome plated die cast zinc

• Content: Chrome plated die cast zinc

• Content: Chrome plated die cast zinc

• Two hole mounting plate

Bow Socket

2695 • Price Breaks: Each / 10 • Unit of measure: Pair • Content: Chrome plated die cast zinc • See the Oak Bow on page 186.

164

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


Vent Aire Vent White 2797

Vent Aire Vent Black 11023

FIT

Fittings

VE

Vent

Vent Aire Vent Clear 11024lorer cilisi

• Price Breaks: Each / 25 • Unit of measure: Each • Designed to help prevent dry rot, condensation, mildew and rust due to improper ventilation. Vinyl vents can be stitched,heat sealed or glued using H66 or Vinabond adhesives to tarps, canvas or vinyl covers. Made of tough, extremely pliable vinyl that can be bent, folded or flattened without damage. Will not rot or discolor and are impervious to sun and weather. Special hood design will spring back to the original shape and remain open regardless of how it may have folded. Sew nylon netting or fiberglass screening to fabric under the vent to prevent insect access. Measurements: A: 1½” (3.8 cm), B: ⅜” (0.95 cm), C: 5” (12.7 cm), D: 4¾” (12.1 cm).

Boat Vent II

C D

A

B

2798

• Price Breaks: Each / 5 • Unit of measure: Each • Boat Vent II uses the design of step coupling. This allows the user to choose which diameter of tent pole is used, either ¾” (1.9 cm) or ⅞ (2.23 cm). With the use of #2799 Hole Cutter, anyone can install Boat Vent II in a matter of seconds. The Boat Vent II system requires only one primary hole and no secondary mounting holes. To achieve the optimum efficiency in ventilation the vent should be at the peak of any cover to release all the moist hot air. Made from GE plastics Geloy ASA and polycarbonate blend for superior strength and UV resistance.

Hole Cutter for Boat Vent II

2799

• Price Breaks: Each • Unit of measure: Each • Simple and efficient cutter for producing clean holes for mounting #2798 Boat Vent II into covers. Crank action cutter creates a precisely sized hole in seconds.

Visit www.jennisfabrics.com

165


FIT

Fittings

CL

Clips /8” Sun Protector Clip 2450

1” Sun Protector Clip 2451

7

/8” Double Sun Protector Clip 2452orer cilisi 7

• Price Breaks: Each / 25 • Unit of measure: Each • Protect Clear Plastic Windows on Boat Frames

Protect Clear Plastic Windows on Boat Frames Two or three sun protector clips will extend the life of clear plastic windows on boats by holding the windows clear of the frame and preventing “heat branding” and abrasion along the frame. This can cause whitening of the clear plastic and weakening of the window.

FIT

Fittings

BL

Black Delrin

Black Delrin A full range of boat fittings in delrin acetyl resin compound. Delrin is ideal for sport and recreational crafts due to its excellent resistance to corrosion of any kind. The color is cast in, not coated on, to hide scratches well. It is unaffected by water exposure, and tough enough that it can be tapped for set screws. These fittings are injection molded under high pressure to give excellent tolerances in a lightweight, economical product designed for durability and performance.

166

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


¾” Inside Eye End

2530

FIT

Fittings

BL

Black Delrin

/8” Inside Eye End

7

2510

• Price Breaks: Each / 25 • Unit of measure: Each • Content: Delrin (nylon)

7

/8” Outside Eye End

Bow Socket

2 Hole Lash Hook

Eye Strap

2541

2769

2671orer cilisi

2640

• Price Breaks: Each / 25

• Price Breaks: Each / 10

• Price Breaks: Each / 25

• Price Breaks: Each / 25

• Unit of measure: Each

• Unit of measure: Pair

• Unit of measure: Each

• Unit of measure: Each

• Content: Delrin (nylon)

• Content: Delrin (nylon)

• Content: Delrin (nylon)

• Content: Delrin (nylon)

¾” Jaw Slide

2620

7

/8” Jaw Slide

2600

• Price Breaks: Each / 25 • Unit of measure: Each • Content: Delrin (nylon)

Visit www.jennisfabrics.com

167


FIT

Fittings

BL

Black Delrin Small Deck Hinge

Large Deck Hinge

2570

2580

Small Deck Hinge Lock Right 2766olorer cilisi

Small Deck Hinge Lock Left 2767

• Price Breaks: Each / 25

• Price Breaks: Each / 25

• Price Breaks: Each / 25

• Price Breaks: Each / 25

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

• Content: Delrin (nylon)

• Content: Delrin (nylon)

• Content: Delrin (nylon)

• Content: Delrin (nylon)

Deck Hinge with Slide 2651

Angle Wedge for Deck Hinge 2652

Angle Base Deck Hinge 2711r cilisi

Angle Base Deck Hinge Large Hole 2712

• Price Breaks: Each / 25

• Price Breaks: Each / 25

• Price Breaks: Each / 25

• Price Breaks: Each / 25

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

• Content: Delrin (nylon)

• Content: Delrin (nylon)

• Content: Delrin (nylon)

• Content: Delrin (nylon)

• Approximately 10° angle

• Holes bored to accept different size pivot screws.

¾” Tube Connector

2612

/8” Tube Connector

7

• Price Breaks: Each / 25 • Unit of measure: Each • Content: Delrin (nylon)

168

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS

2614


Nylon Head Screw 2654

Slide Lock with Screw 2657

FIT

Fittings

BL

Black Delrin

2 Hole Side Mount Plate 2661olorer cilisi

Side Mount Slide with Jammer 2701

• Price Breaks: Each / 25

• Price Breaks: Each / 25

• Price Breaks: Each / 25

• Price Breaks: Each / 25

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

• Content: Delrin (nylon)

• Content: Delrin (nylon)

• Content: Delrin (nylon)

• Content: Delrin (nylon)

• Nylon head screw gives better grip and torque. Fits all side mounts and deck hinges.

• Head has slot for screwdriver, sides of heads are knurled for finger tightening.

Track Slide 2681

Channel Trim End Insert 2683

Channel End Stop 2691orer cilisi

• Price Breaks: Each / 25

• Price Breaks: Each / 10

• Price Breaks: Each / 25

• Unit of measure: Each

• Unit of measure: Pair

• Unit of measure: Each

• Content: Delrin (nylon)

• Content: Delrin (nylon)

• Content: Delrin (nylon) • Matches end profile of slide track chaneel to finish end cuts cleanly and smoothly.

1” Square Inside Eye End

2708

1” Square Jaw Slide

2705

• Price Breaks: Each / 25 • Unit of measure: Each • Content: Delrin (nylon)

Visit www.jennisfabrics.com

169


FIT

Fittings

WH

White Delrin

White Delrin A full range of boat fittings in delrin acetyl resin compound. Delrin is ideal for sport and recreational crafts due to its excellent resistance to corrosion of any kind. The color is cast in, not coated on, to hide scratches well. It is unaffected by water exposure, and tough enough that it can be tapped for set screws. These fittings are injection molded under high pressure to give excellent tolerances in a lightweight, economical product designed for durability and performance.

¾” Inside Eye End

2520

/8” Inside Eye End

7

2500

• Price Breaks: Each / 25 • Unit of measure: Each • Content: Delrin (nylon)

7

/8” Outside Eye End

Batten Socket

Bow Rail Socket

Eye Strap

2540

2768

11042

2630

170

• Price Breaks: Each / 25

• Price Breaks: Each / 10

• Price Breaks: Each

• Price Breaks: Each / 25

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

• Content: Delrin (nylon)

• Content: Delrin (nylon)

• Content: Delrin (nylon)

• Content: Delrin (nylon)

• For use with #2765 Oak Bow.

• For use with #2765 Oak Bow.

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


¾” Jaw Slide

7

/8” Jaw Slide

2610

2590

• Price Breaks: Each / 25

• Price Breaks: Each / 25

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

• Content: Delrin (nylon)

• Content: Delrin (nylon)

• Content: Delrin (nylon)

Large Deck Hinge

2550

2560

Fittings

WH

White Delrin

2 Hole Side Mount Plate 2660

• Price Breaks: Each / 25

Small Deck Hinge

FIT

Deck Hinge with Slide 2650orer cilisi

Angle Base Deck Hinge 2710

• Price Breaks: Each / 25

• Price Breaks: Each / 10

• Price Breaks: Each / 25

• Price Breaks: Each / 25

• Unit of measure: Each

• Unit of measure: Pair

• Unit of measure: Each

• Unit of measure: Each

• Content: Delrin (nylon)

• Content: Delrin (nylon)

• Content: Delrin (nylon)

• Content: Delrin (nylon)

Angle Wedge for Deck Hinge 2561

2 Hole Lash Hook

Nylon Head Screw

Slide Lock with Screw

2670

2653e

2655

• Price Breaks: Each / 25

• Price Breaks: Each / 25

• Price Breaks: Each / 25

• Price Breaks: Each / 25

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

• Content: Delrin (nylon)

• Content: Delrin (nylon)

• Content: Delrin (nylon)

• Content: Delrin (nylon)

• Nylon head screw gives better grip and torque. Fits all side mounts and deck hinges.

• Head has slot for screwdriver, sides of heads are knurled for finger tightening.

Visit www.jennisfabrics.com

171


FIT

Fittings

WH

White Delrin

Side Mount Slide with Jammer 2700

Track Slide

Channel End Cap

2680l

2690orer cilisi

Channel Trim End Insert 2682

• Price Breaks: Each / 25

• Price Breaks: Each / 25

• Price Breaks: Each / 25

• Price Breaks: Each / 25

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

• Content: Delrin (nylon)

• Content: Delrin (nylon)

• Content: Delrin (nylon)

• Content: Delrin (nylon)

1” Square Inside Eye End

2706

1” Square Jaw Slide

2709

• Price Breaks: Each / 25 • Unit of measure: Each • Content: Delrin (nylon)

¾” Tube Connector

2611

/8” Tube Connector

7

• Price Breaks: Each / 10 • Unit of measure: Each • Content: Delrin (nylon)

172

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS

2613


FIT

Fittings

ST

Stainless Steel

Stainless Steel Top Fittings High quality die cast 316 stainless steel fittings, highly polished for a brilliant finish. Used in the construction of bimini top frames. Extremely strong and durable. They are drilled to accept either one of the ⅜” (0.95 cm) quick release pins listed on page 177 or a machine screw with ¼-20 threads; in some cases a headless screw of this size is included. Those with mounting screws are predrilled to accommodate the use of #10 screws, which will mount flush in the countersunk holes.

90° Deck Hinge 2582

Quick Release 90° Deck Hinge 2583

Angle Base Deck Hinge 2584rer cilisi

Quick Release Angle Deck Hinge 2585

• Price Breaks: Each / 10

• Price Breaks: Each / 10

• Price Breaks: Each / 10

• Price Breaks: Each / 10

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

• 90° base hinge drilled to accept ¼-20 threaded screw, ⅞” x 2” (2.2 x 5.1 cm) base.

• 90° deck hinge, same as #2582, but drilled to accept the Quick Release pin (included)

• Angled base deck hinge drilled to accept ¼-20 threaded screw, ⅞” x 2” (2.2 x 5.1 cm) base.

• Deck hinge, same as #2584, pre drilled to accept a ⅜” Quick Release pin (included).

Heavy Duty Deck Hinge 2587

180° Universal Deck Hinge 2588

• Extra pins#2702 or #2703.

Quick Release Rail Hinge Concave Base 2586er cilisi

Quick Release Bimini Strap Hinge 2578

• Price Breaks: Each / 10

• Price Breaks: Each / 10

• Price Breaks: Each / 10

• Price Breaks: Each / 25

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

• Cast 316 stainless steel fitting. Extremely strong and durable. Used in the construction of bimini top frames.

• Can be used on right or left hand side of a boat frame. Sturdy pivoting deck hinge allows 180° of swivel.

• Rail hinge mounts onto tubing or handrails, concave base fits securely. Hinge formed by quick release pin (included).

• Easily remove or install. Fasten to deck with 2 #10 screws (not included). Low profile.

Visit www.jennisfabrics.com

173


FIT

Fittings

ST

Stainless Steel Quick Release Bimini Top Hinge 2576

Ball & Socket Deck Hinge w/ Pin & Lanyard 2563er

2 Hole Side Mount Plate 2663olorer cilisi

4 Hole Side Mount Plate 2664

• Price Breaks: Each / 25

• Price Breaks: Each / 10

• Price Breaks: Each / 10

• Price Breaks: Each / 10

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

• Easily removes or installs without having to keep track of screws. Installs with two #10 screws (not included).

• Ball & Socket design offers greater rotation. Delrin insert provides smooth, rattle-free canvas top operation.

• Side mount hinge including ¼-20 screw, ⅞” x 2” (2.2 x 5.1 cm) base with 2 countersunk mounting holes.

• Similar to #2663, this heavy duty item has 4 mount holes.

1¼” Eye End (2 screw) 2720

1” Eye End (2 screw) 2666

1” Heavy Duty Top Cap Eye End 2689r cilisi

1” Eye Slide 2688

• Price Breaks: Each /10

• Price Breaks: Each / 10

• Price Breaks: Each / 10

• Price Breaks: Each / 10

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

• Drilled to accept either the ⅜” Quick Release pins or a machine screw with ¼-20 threads. Fits 1¼” tubing.

• Drilled to accept either the ⅜” Quick Release pins or a machine screw with ¼-20 threads.

• Strong, cast 316 stainless steel fitting.

• Drilled to accept either the ⅜” Quick Release pins or a machine screw with ¼-20 threads.

/8” Quick Release Side Mount/Eye End 2581

7

• Price Breaks: Each /10 • Unit of measure: Each • 2 hole side mount with “Quick Release” eye end. Two part eye end mounting system. Eye end fits ⅞” aluminum tubing, then fits vertically into mount and locks when pivoted off center. Base size approximately ⅞” x 2”(2.2 x 5.1 cm). Pre drilled to accomodate ¼” - 20 screws.

174

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


1” Top Cap Eye End 2692

/8” Top Cap Eye End 2693

FIT

Fittings

ST

Stainless Steel

Quick Release Round Surface Mount Bimini Top Fit 2577olorer cilisi

7

• Price Breaks: Each / 10

• Price Breaks: Each / 10

• Price Breaks: Each / 25

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

• For 1” (2.54 cm) outside diameter tubing. Eye fits either ¼” (0.6 cm) bolt or quick release pin. Headless screw included.

• For ⅞” (2.2 cm) outside diameter tubing. Eye fits either ¼” (0.6 cm) bolt or quick release pin. Headless screw included.

• Round design fits with the shape of the boat. Adapter can be inserted four different ways, 90° apart.

/8” Ball & Socket Outside Top Cap 2564

7

1” Ball & Socket Outside Top Cap 2565

• Price Breaks: Each / 10 • Unit of measure: Each • Ball & Socket top cap design offers greater rotation. A variety of sizes and fastener types are available. High quality, marine grade 316 stainless steel with polished finish. Used in the construction of Bimini boat top frames.

7

/8” Ball & Socket Jaw Slide

2566

1” Ball & Socket Jaw Slide

2567

• Price Breaks: Each / 10 • Unit of measure: Each • Ball & Socket jaw slides feature a Delrin insert for smooth, rattle-free canvas top operation. High quality, marine grade 316 stainless steel with polished finish.

Visit www.jennisfabrics.com

175


FIT

Fittings

ST

Stainless Steel 7

/8” Jaw Slide with Rubber Gasket 2667

1” Jaw Slide with Rubber Gasket 2665

• Price Breaks: Each / 10 • Unit of measure: Each • Rubber gasket to eliminate rattling.

2697

1” Double Side Jaw Slide

• Price Breaks: Each / 10 • Unit of measure: Each • Cast 316 stainless steel fittings. Highly polished for a brilliant finish. Extremely strong and durable. Drilled to accept either the ⅜” Quick Release pins or a machine screw with ¼-20 threads.

7

/8” Split Jaw Slide

1” Split Jaw Slide

1¼” Split Jaw Slide

2698

2699

11043r cilisi • Price Breaks: Each / 10 • Unit of measure: Each • Hinged to open and close around ⅞” (2.2 cm), 1” (2.54 cm) or 1¼” (3.2 cm) rail. Bolt is ¼” (0.6 cm). All stainless steel.

176

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


/8” Jaw Slide with Bolt

2704

7

FIT

Fittings

ST

Stainless Steel

1” Jaw Slide with Bolt

2694

• Price Breaks: Each / 10 • Unit of measure: Each • Jaw slides for ¼-20 screw (included) for either ⅞” (2.2 cm) or 1” (2.54 cm) outside diameter tubing.

1¼” Jaw Slide (2 screw) 2721

1” Jaw Slide (2 screw) 2668

1” Heavy Duty Jaw Slide 2696olorer cilisi

1” Jaw Slide with Bolt 2694

• Price Breaks: Each / 10

• Price Breaks: Each / 10

• Price Breaks: Each / 10

• Price Breaks: Each / 10

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

• Jaw Slide sized to fit and slide cleanly over 1¼” frame tubing. Can be secured with set screw (included).

• Drilled to accept either the ⅜” Quick Release pins or a machine screw with ¼-20 threads.

• Strong, cast 316 stainless steel fitting. Used in bimini top frames.

• ¼ - 20 screw (headless screw included). For 1” tubing.

Quick Release Pin 2702

Quick Release Pin with Lanyard 2703

Toggle Pin 2908er cilisi

Quick Release Pin with Nylon Coated Lanyard 130004

• Price Breaks: Each / 25

• Price Breaks: Each / 25

• Price Breaks: Each / 10

• Price Breaks: Each / 25

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

3 /16” (0.5 cm) diameter toggle pin. Spring keeps toggle under tension once set.

• Highly polished 316 stainless steel.

• Spring loaded ball in tip of pin holds it in place. Strong as a hinge against vertical pull, but comes out cleanly with a sideways pull.

3 /16” (0.5 cm) quick release pin with 7” (18 cm) steel wire lanyard.

Visit www.jennisfabrics.com

177


FIT

Fittings

ST

Stainless Steel 1” Adjuster Slide

1” Snap Hook

Pad Eye

2572

2575

2535rer cilisi

• Price Breaks: Each / 25 / 100

• Price Breaks: Each / 25 / 100

• Unit of measure: Each

• Unit of measure: Each

• Cast 316 stainless steel fitting. Polished for a brilliant finish.

• Cast 316 stainless steel fitting. Polished for a brilliant finish.

/8” Gemini Sliding Side Mount 11060 7

1” Gemini Sliding Side Mount 11061

Stainless Steel Set Screw 2687

• Price Breaks: Each / 25

• Price Breaks: Package / 4

• Unit of measure: Each

• Unit of measure: Package of 25

• Stainless steel pad eye with two mounting holes.

• Extremely strong and durable. Used in the construction of bimini top frames.

1¼” Gemini Sliding Side Mount 11062orer cilisi

• Price Breaks: Each • Unit of measure: Each • 316 Stainless Steel polished to marine bright finish. Compatible with standard marine end fittings. Heavy duty construction with two set screws, Phillips head bolt and nylon washer. Easy installation, requires no modification of existing frames.

/8” Gemini Split Jaw Slide Mount 11063 7

1” Gemini Split Jaw Slide Mount 11064

1¼” Gemini Split Jaw Slide Mount 11065orer cilisi

• Price Breaks: Each /10 • Unit of measure: Each • 316 Stainless Steel. Split style mounts can be mounted any where on a frame - creates a greater range of applications.

178

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


/8” Gemini Hinge

7

11066

FIT

Fittings

ST

Stainless Steel

1” Gemini Hinge

11067

• Price Breaks: Each / 10 • Unit of measure: Each • 316 Stainless Steel. Solid body construction with two Buna O-rings to compensate for tubing wall thickness variation. Relief areas are provided for attachment to tubing via either roll pins or set screws.

/8” x 3’ Assembled Folding Strut 11068 7

1” x 3’ Assembled Folding Strut 11069

/8” x 6’ Assembled Folding Strut 11070rer cilisi 7

1” x 6’ Assembled Folding Strut 11071

• Price Breaks: Each / 10 • Unit of measure: Each • Prefabricated folding struts. Stainless hinges are secured in stainless tubing using stainless roll-pins. Oversized sleeve member slides over hinge area/joint and is locked in place using two spring ball end-stops. Creates a secure joint which cannot be accidentally dislodged and is fully load bearing.

Gemini Stainless Steel Fittings The Gemini Fitting are made of 316 stainless steel and include a Sliding Side Mount, Split Jaw Side Mount fitting in ⅞”, 1” and 1¼”, as well as hinges in ⅞” and 1” and preassembled folding Struts in ⅞” and 1” in 3’and 6’ lengths. The Sliding Side Mount and Split Jaw Side Mount feature a beefed up body style with a stand-off style that allows hand room between the grab rail and the fabric which makes them ideal for mounting struts, grab and hand rails to marine frames. The Gemini Hinges fit standard tubing for use in collapsible support struts, dinettes and folding tables and folding seating. The prefabricated Folding Struts create a full load bearing joint which cannot be accidentally dislodged. These can be used to eliminate the straps on a Bimini Top, and can be folded away when not in use or as a grab rail or hand rail. This provides an added safety feature to your boat, by removing the straps and adding grab rails.

Visit www.jennisfabrics.com

179


FIT

Fittings

ST

Stainless Steel

Stainless Steel Rail Fittings ⅞” (2.2 cm) & 1” (2.54 cm) A wide range of fittings to be used along with ⅞” (2.2 cm) and 1” (2.54 cm) stainless steel tubing to create handrails and guides. The range of angles on the bases and stanchions will allow you to fit most contours and shapes. Use 1” to create a heavier, more sturdy rail.

/8” 90° Rectangular Base

7

2850

1” 90° Rectangular Base

2851

1” 60° Rectangular Base

2855

• Price Breaks: Each / 10 • Unit of measure: Each • Content: Stainless steel

/8” 60° Rectangular Base

7

2854 • Price Breaks: Each / 10 • Unit of measure: Each • Content: Stainless steel

180

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


/8” 90° Round Base

7

2858

FIT

Fittings

ST

Stainless Steel

1” 90° Round Base

2859

• Price Breaks: Each / 10 • Unit of measure: Each • Content: Stainless steel

/8” 60° Round Base

7

2862

1” 60° Round Base

2863

• Price Breaks: Each / 10 • Unit of measure: Each • Content: Stainless steel

7

/8” 90° Tee Fitting

2870

1” 90° Tee Fitting

2871

• Price Breaks: Each / 10 • Unit of measure: Each • Content: Stainless steel

Visit www.jennisfabrics.com

181


FIT

Fittings

ST

Stainless Steel 7

/8” 60° Universal Tee Fitting

2874

1” 60° Universal Tee Fitting

2875

1” 60° Center Stanchion

2901

• Price Breaks: Each / 10 • Unit of measure: Each • Content: Stainless steel.

/8” 110° Bow Form

2882

7

• Price Breaks: Each / 10 • Unit of measure: Each • Content: Stainless steel.

/8” 60° Center Stanchion

7

2900 • Price Breaks: Each / 10 • Unit of measure: Each • Content: Stainless steel.

182

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


/8” 60° Aft Stanchion

7

FIT

Fittings

ST

Stainless Steel

2904

1” 60° Aft Stanchion

2905

2878

1” 90° Elbow

2879

• Price Breaks: Each / 10 • Unit of measure: Each • Content: Stainless steel.

/8” 90° Elbow

7

• Price Breaks: Each / 10 • Unit of measure: Each • Content: Stainless steel.

/8” 3 Way Corner Fitting 2888 7

Elbow and Anchor Eye 2892

5½° Rail End (End Out) 2885 cilisi

Rail End 5½° (End In) 2886

• Price Breaks: Each / 10

• Price Breaks: Each / 10

• Price Breaks: Each / 10

• Price Breaks: Each / 25

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

• Content: Stainless steel.

• Content: Stainless steel.

• Content: Stainless steel.

• Content: Stainless steel.

Visit www.jennisfabrics.com

183


FIT

Fittings

TE

Tent Pole

Customize Adjustable Tent Poles The illustration below shows the traditional cockpit tent pole assembly. This unit can be created by fitting lengths of the ¾” (1.9 cm) bright dip aluminum tubing into the ⅞” (2.2 cm) bright dip tubing using the #2785 joint section connector. It fits onto the ⅞” (2.2 cm) tubing and has a locking screw for adjusting the extension of the ¾” (1.9 cm). Finish the ends off with a no-slip soft vinyl foot and a pole end for grommets or snaps. This combination gives a professional finished product. Further, the joint section connector can be used anywhere that you find the need for extendable elements of the tubing sizes. Assembled units are available on the following page.

Pole End for Cockpit Pole

2775 • Price Breaks: Each / 25 • Unit of measure: Each • The delrin unit fits into ¾” (1.9 cm) tubing and is tapered to accept self center grommets with an interior finished diameter of ⅜” (0.95 cm) or greater. Round edges will not tear or snag canvas or tops.

Dura Snap Pole End for Cockpit Pole 2780 • Price Breaks: Each / 25 • Unit of measure: Each • Smooth delrin fitting that has a standard Dura Snap stud. Fits firmly into the end of ¾” (1.9 cm) tubing. Snap is nickel plated brass for long life.

184

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


Joint Section for Cockpit Pole

FIT

Fittings

TE

Tent Pole

2785

• Price Breaks: Each / 25 • Unit of measure: Each • Tough delrin fitting with nylon head screw for locking extension of the ¾” (1.9 cm) tubing. Fits securely onto the ⅞” (2.2 cm) tubing.

¾” Vinyl Foot for Cockpit Pole 2790 • Price Breaks: ¾”: Each / 25

/8” Vinyl Foot for Cockpit Pole

7

2795

⅞”: Each / 10

• Unit of measure: Each • Non slip, non marring vinyl feet for aluminum or steel tubing in 2 sizes. Finish off any exposed or open tubing end with these pieces.

Support Pole 18¼” - 28” Combo End 2800

Support Pole 27¼” - 47” Combo End 2801

Support Pole 383/8” - 70” Combo End 2802er cilisi

• Price Breaks: Each / 50 • Unit of measure: Each • Pre-assembled telescoping support for water craft, with combo end. Combination ends- one end is a snap and the other end is a wedge and comes with a grey rubber crutch tip in non-marring TPR synthetic rubber.

Visit www.jennisfabrics.com

185


FIT

Fittings

MI

Miscellaneous 6’ Wooden Bow

2765 • Price Breaks: Each / 10 • Unit of measure: Each • 6’ (183 cm) wooden bow for use with bow sockets (#2695, #2769, #2768) to form supports or runners for tonneau covers or boat tops and covers. Can be trimmed to length - bow should be under slight tension when fitted.

1” Adjuster Slide

Marine Windshield Welt 2778

2000

Stop Leak Trim Black 2779r cilisi

• Price Breaks: Each /25 / 100

• Price Breaks: Yard / 25 / 167

• Unit of measure: Each

• Unit of measure: Yard

• Nickel plated brass adjuster for use with webbing in outdoor or marine applications.

• Welt style PVC over ⅜” (0.9 cm) foam, with ½” (1.3 cm) seam allowance.

Aluminum Slide Track Channel

• Price Breaks: Each / 5 • Unit of measure: 100’/30.5 m roll (⅜” x 1⅛”) • PVC bulb seal sewn to marine top fabric to prevent spray from coming through between windshield and top.

2740 • Price Breaks: Each / 10 • Unit of measure: 12 foot/3.66 m lengths • Content: Anodized aluminum • Bright anodized aluminum channel to use with marine fittings listed in this section. See dimensions at scale below. • A: ⅜” (0.9 cm), B: 13/16” (2.1 cm), C: ⅜” (0.9) C B

186

A TO SCALE

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


¾” OD x 0.058 Wall Thickness x 20’ 8362

FIT

Fittings

TU

Tubing Alum

/8” OD x 0.058 Wall Thickness x 20’ 8372

7

• Price Breaks: ¾”: Each (20’) / 12 (240’) / 54 (1080’) ⅞”: Each (20’) / 12 (240’) / 38 (760’) • Unit of measure: Foot (in complete lengths of 20’ only) • Seamless Aluminum Tubing Round • Drawn aluminum tubing with a polished bright dip finish. Lightweight and easy to work with the ¾” (1.9 cm) tubing will slide easily into ⅞” (2.2 cm) tubing to form cockpit poles (see fittings on page 184). Sold in lengths of 20’ (6.1 m).

/8” Brite Anodized Aluminum Tube x 24’ 11231

7

• Price Breaks: Each / 18 • Unit of measure: Each • Brite anodized aluminum tube • ⅞” (2.2 cm) outside diameter x 0.058” wall thickness x 24’ (7.3 m). • Lightweight and easy to work with, the ¾” will slide easily into the ⅞” to form cockpit poles. 24’ will have to be shipped by truck. J. Ennis Fabrics will cut to be shipped by courier.

1” OD x 0.058 Wall Thickness x 24’

8368

• Price Breaks: Each (24’) / 10 (240’) • Unit of measure: Foot (in complete lengths of 24’ only) • Seamless Aluminum Tubing Square • Anodized 1” (2.54 cm) square tubing. Can be used with fittings #2706, #2705, and #2708.

Visit www.jennisfabrics.com

187


FIT

Fittings

TU

Tubing SS 7

/8” OD x 0.049 Wall Thickness x 20’ 8374

1” OD x 0.065 Wall Thickness x 20’ 8365

• Price Breaks: Each (20’) / 10 (200’) • Unit of measure: Foot (in complete lengths of 20’ only) • Stainless Steel Tubing Round • Bright finished stainless steel tubing. Extra strength makes for a stronger frame and it is ideal for railings. Sold in complete lengths of 20’ (6.1 m).

/8” OD x 0.065 Wall Thickness x 24’ 8373 7

1” OD x 0.065 Wall Thickness x 24’ 8364

1¼” OD x 0.065 Wall Thickness x 24’ 8367orer cilisi

• Price Breaks: Each (24’) / 10 (240’) • Unit of measure: Foot (in complete lengths of 24’ only) • Stainless steel tubing round

188

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


TOO

Tools

TU

Tubing

Bendarc® • Price Breaks: Each • Unit of measure: Each • #8394: 12” radius for 1” is by special order only.

6” Radius for 7/8” 8” Radius for 7/8” 12” Radius for 7/8”

8378 8388 8396

8” Radius for 1” 10” Radius for 1” 12” Radius for 1” 12” Radius for 1” Square

8382 8392 8394 8379

No More Wasted Tubing Bend tubing without marring or kinking is a problem unless you have the right equipment. The Bendarc® tool mounts solidly to a workbench or wall and is constructed of a steel boiler plate and the toughest polymers available. It comes with a graduated scale generated by a computer that eliminates the guesswork and results in no wasted materials; the bends are right the first time. Merely mark your bends, insert and clamp the piece into the Bendarc®, giving you precise control of the degree of bend. This machine is strong enough to bend either aluminum or stainless steel tubing. See #8370 for a kit that changes the polymer dies and allows for the bending of the 1” (2.54 cm) square tubing. Although not specifically listed for this application, the ⅞” (2.2 cm) die set will work with the ¾” (1.9 cm) aluminum tubing.

Bendarc® 1” Square Tubing Kit

8370

• Price Breaks: Each • Unit of measure: Each • Set of strong polymer replacement dies to allow a Bendarc® tool to cleanly and neatly bend square tubing. Note: Bendarc® not included.

Visit www.jennisfabrics.com

189


TOO

Tools

TU

Tubing CrownArc®

8380 • Price Breaks: Each • Unit of measure: Each • Gear driven tubing crowner gives smooth consistent crowns • The CrownArc® device gives beautiful smooth consistent crowns, with no sharp edges or awkward kinks, to round stainless steel or aluminum tubing in sizes from ¾” (1.9 cm) up to 1” (2.54 cm). The 1” (2.54 cm) rollers work properly with smaller sizes as well. Both the lower rollers on the CrownArc® turn providing better control over the feed and curve imparted. It also allows a bigger bite to give more crown per pass. • Easy to use: Insert the bow and tighten the knurled knob about ¾ of a turn; then crank it through. If you wish more arc, then tighten some more and crank the bow through again.

FIT

Fittings

KI

Kits BTK-1 Boat Top Frame Kit

2763 • Price Breaks: Each • Unit of measure: Each • Complete boat top frame ready made • Made of ⅞” (2.2 cm) Brite anodized tubing and easily fitted to boats with beams from 40” - 80” (101 - 203 cm). Each unit contains: 1 - Frame, 2 - ⅞” (2.2 cm) Jaw Slides, 2 - Large Deck Hinges, 2 - Eye Straps, 4 - ⅞” (2.2 cm) Inside Eye Ends, 4 - 1” (2.54 cm) Nickel Brass Slides, 2 - 1” (2.54 cm) Nickel Brass Snaps. All fittings are white Delrin unless otherwise indicated.

190

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


FIT

Fittings

KI

Kits

Bimini Boat Top Frame Kit 2761 • Price Breaks: Each • Unit of measure: Each • 3 bow frame kit fabricated from ⅞” (2.2 cm) Brite Dip aluminum tubing. Packed one per box, complete with hardware. All fittings are black Delrin unless otherwise indicated. Dimensions as per diagram. • Clean, flush joints using insert sleeve.

90” (2.3 m) max

90” (2.3 m)

42” (1.07 m) max

Pontoon Boat Top Frame Kit 2462 • Price Breaks: Each • Unit of measure: Each • 1” x 1” x 0.062 extruded satin anodized square tubing. Packed one per box, complete with black Delrin nylon fittings.

Large Boat Top Frame Kit

2764

• Price Breaks: Each • Unit of measure: Each • 2 bow frame. Packed one per box, complete with hardware. ⅞” (2.2 cm) x 0.058 drawn aluminum brite anodized tubing with black Delrin nylon fittings.

Visit www.jennisfabrics.com

191


FIT

Fittings

HI

Hinges 6’ W Continous Alum Boat Seat Hinge 2772

3” Flat Continuous Boat Seat Hinge 2776

• Price Breaks: Each / 12 • Unit of measure: 6’ (1.8 m) length • #2772: A 6’ (1.8 m) length of hinge in mill finish, drilled on 2” (5.08 cm) centers, staggered ½” (1.3 cm). 4½” (11.4 cm) open width in 0.060 aluminum. • #2776: A 3” (7.6 cm) wide, 6’ (1.8 m) long continuous hinge with 3/16” (0.5 cm) holes drilled on 4” (10 cm) centers.

FIT

Fittings

HO

Hooks

1” Snap Hook Brass-Nickel 7700 • Price Breaks: Each / 25 / 100 • Unit of measure: Each • Content: Nickel plated brass • Nickel plated brass snap hook for marine and other salt moisture exposed applications. See the Bags section for more options in hooks.

192

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


24” x 54” Plastic Window

6469

FIT

Fittings

WI

Windows

29” x 62” Plastic Window

6479

• Price Breaks: Each / Drum (35) • Unit of measure: Each • 40 gge laminated 2 layer windows suitable for boat or convertible tops. Heavy duty construction, interleaved to prevent scratching.

FIT

Fittings

MI

Miscellaneous

JEF Beam JEF Beam hooks are extremely strong: JEF Beam aluminum rail holds ≈ 675lbs. (306 kg), individual hook will support 70lbs. (32 kg). Features an incredibly smooth rolling system, quieter and smoother than any metal rolling hook system and is RoHs compliant against containing mercury, lead, hexavalent chromium, PBB and PBDE. Recommendations: • A maximum of 12” (30.5 cm) between hooks. • When using corners or bent tubing, hooks should be place no more than 8” (20.3 cm) apart to ensure smooth movement. • For particularly windy locations, hooks should be positioned in “crisscross” pattern with one hook facing in and the next facing out. To ensure smooth rolling movement of the hooks: • When cutting and combining rail pieces with corners or connectors, it is important to file any burrs on the inside of the cut rails. • Use #0 spur grommets for hanging fabric on the hooks.

How to use a screw to mount the JEF Beam Rail Figure 1: A groove line runs along the entire length of the rail. This groove is made for the use of a round head #10 screw. Figure 2: The hook will pass over the screw without any problems however other screw types may not work as well. Guidelines for distance between hooks: Length of rail or wall of fabirc = Hook spacing 4’ (1.22 m) = 12” (30.5 cm) (4 hooks) 5’ (1.53 m) = 10” (25.4 cm) (6 hooks) 6’ (1.83 m) = 8” (20.3 cm) (9 hooks) 8’ (2.44 m) = 6” (15.3 cm) (16 hooks) 10’ (3.05 m) = 4” (10.2 cm) (30 hooks)

Figure 1

Visit www.jennisfabrics.com

Figure 2

193


FIT

Fittings

MI

Miscellaneous JEF Beam Rail Connector Natual

2737

JEF Beam Rail Connector White

2747

• Price Breaks: Each / 10 / 500 • Unit of measure: Each • Simple slide over connector for joining sections and corners of the JEF Beam rail system.

JEFBeam Rail 90° Corner 48” Natual 2738

JEFBeam Rail 90° Corner 48” White 2746

• Price Breaks: Each / 4 • Unit of measure: Each • 48” (1.22 m) radius • When using corners or rounded tubing, hooks should be placed no more than 8” apart to ensure smooth movement. When cutting and combining rail pieces with corners or connectors, it is important to file any burrs on the inside of the cut rails, this will ensure smooth rolling movement of the hooks.

JEFBeam Rail 20’ Natural

2739

JEFBeam Rail 20’ White

• Price Breaks: Each / 12 • Unit of measure: Each • 20’ (6.1 m) length

194

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS

2741


JEFBeam Plastic Hook Short White 2742

JEFBeam Plastic Hook Short Black 2743

JEFBeam Plastic Hook Short Sand 2748olorer cilisi

FIT

Fittings

MI

Miscellaneous JEFBeam Plastic Hook Short Aluminum 2750

• Price Breaks: Each / 10 / 100

• Price Breaks: Each / 10 / 100

• Price Breaks: Each / 10 / 100

• Price Breaks: Each / 10 / 100

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

• 2½” (6.35 cm) length, wheel diameter ⅞”

• 2½” (6.35 cm) length, wheel diameter ⅞”

• 2½” (6.35 cm) length, wheel diameter ⅞”

• 2½” (6.35 cm) length, wheel diameter ⅞”

JEFBeam Plastic Hook Long White 2744

JEFBeam Plastic Hook Long Black 2745

JEFBeam Plastic Hook Long Sand 2749orer cilisi

• Price Breaks: Each / 10 / 100

• Price Breaks: Each / 10 / 100

• Price Breaks: Each / 10 / 100

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

• 3½” (8.89 cm) length, wheel diameter ⅞”

• 3½” (8.89 cm) length, wheel diameter ⅞”

• 3½” (8.89 cm) length, wheel diameter ⅞”

Visit www.jennisfabrics.com

195


FIT

Fittings

WE

Welt

Marine Ultra Seal Black

2786 • Price Breaks: Foot / 50 / 100 • Unit of measure: Foot/30.5 cm • Ultra seal has a new flatter profile designed for great edge seals. Can be glued or sewn to most materials and surfaces. Works well with Common Sense fasteners and gives a flatter finished profile.

XtremeEdge Seal Black

2787

XtremeEdge Seal White

2789

• Price Breaks: Foot / 25 / 50 • Unit of measure: Foot/30.5 cm • Unique, flexible edge seal. Can be sewn or glued to most materials and surfaces and creates a three-point contact seal. Use for boat top edging, convertible tops, side curtains, camper enclosures, windshield top and sides (boats and convertibles), boat front drop windshields, radar arches and deck seals.

Marine V Seal Black

2788 • Price Breaks: Foot / 25 / 50 • Unit of measure: Foot/30.5 cm • V seal is the right choice for all cut outs and tight corners, especially bow covers and radar arch cut outs.

196

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


FOA

Foam

Information

Foam Information Urethane foams have become the universal standard for seating and padding in the upholstery industry. Urethane foam has many advantages over natural products such as horsehairs, down, etc. It is more stable, sanitary, easy to work with and is available in sizes and shapes that minimize cutting and forming. To better understand the way it is sold we offer the following definitions: Board Foot: This is the measure of how foam pricing is normally calculated. It gives an indication of the volume of foam in a given sheet. One board foot is 1” x 12” x 12” (2.54 cm x 30.5 cm x 30.5 cm). To get the board feet in a given sheet, multiply the length x width x the height in inches, then divide by 144. Closed Cell: A foam product whose cells are not connected with other cells. This foam tends to be a dense, heavy padding type of foam. A common application is in landau tops on automobiles. It is very resilient and minimally affected by moisture. Open Cell: The cells of this product are not totally enclosed but rather are interlinked with each other. Most urethane foam products are open cell. Open cell foams generally have a lower density than closed cell foams. These products also tend to absorb water or moisture, making them easy to glue or laminate. Compression: This is a measure of how much weight is required to depress the foam a given percentage. We use a figure that is the result of a test called the “Indentation Load Deflection Test”. This test used a standard round disk which is set onto a piece of 4” (10.16 cm) foam. The foam is then compressed to 75% of its original height, and the pounds of pressure required to reach the point is recorded. This test is performed on all the products with the same equipment to give a comparison of the compression of the foam being considered. The compression range given in our charts is the result of this “ILD” test. Density: This number indicates the weight of one cubic foot of the foam. Generally, as density increases, so does quality and cost. Our foam products range in density from 1.1 to 2.8lbs./cubic foot (0.0176 g/cubic cm).

Availability by Distribution Centres Foam is a bulky product, most transport and courier companies would rather fit 20 heavy boxes into the space taken up by one piece of foam. Wherever possible, we negotiate rates with a carrier based on the mix of goods we ship rather than individual pieces. We try to ship with companies that will charge by weight rather than size. J. Ennis Fabrics stocks foam in all branches rather than at a central point, and due to the differences experienced regionally, there are sometimes small variances in sheet size, bundle quantities and availability. The header across the top of each page indicates the stocking warehouse. Please ensure that you are reading the foam list for you primary warehouse. If you are unsure as to which distribution centre serves your needs, please enquire at our Customer Service Centre. West (Interior BC, Alberta, Saskatchewan): Edmonton Distribution Centre, (Lower BC): Vancouver Distribution Centre East (Manitoba, Ontario, Atlantic Canada, Quebec): Toronto Distribution Centre

Visit www.jennisfabrics.com

197


FOA

Foam

Comparison

Foam Grades Comparison Chart The following list gives density and compression by the “Identification Load Deflection” test discussed on the previous page.

Foam Type/Grade Density

Compression

lbs./cubic foot g/cubic cm Curon C45 Curon C35 Curon C25 Duron 426 Soft Duron 533 Medium Duron 639 Firm Duron 766 X-Firm H 100 K 126 R 45 Regular Qualux 25 Soft Qualux Medium Qualux Firm Supersoft UltraCell 1.8 Firm Visco Elastic

2.0 2.0 2.0 2.2 2.2 2.2 2.2 1.8 2.0 1.5 1.3 2.8 2.8 2.8 1.1 1.8 2.9

0.0320 0.0320 0.0320 0.0352 0.0352 0.0352 0.0352 0.0288 0.0320 0.2400 0.0208 0.0448 0.0401 0.0416 0.0176 0.0288 0.0464

lbs. 47-52 28-35 25 21-27 28-34 47-52 52-62 95-105 125 41-47 34-40 19-25 34-40 41-46 15-20 41-46 40

Page kg 21.3-23.6 12.7-15.9 11.3 9.5-12.2 12.7-15.4 21.3-23.6 23.6-28.1 431.-47.6 57 18.6-21.3 15.4-18.1 7.7-9.1 11.8-13.6 18.6-20.8 6.8-9.1 18.6-20.8 18.1

All

West

East

201 200 199

203 203 204 204 207 209 207 206 210 210 210 205 209 -

213 213 213 215 214 214 214 212 211 -

The harder (compression) the foam does not necessarily indicate a better quality. The K 126 foam has a compression range of 115-125lbs. (52-62 kg), but a density of only 2lbs./cubic foot (0.032 g/cubic cm). While this is the hardest foam on the list, the UltraCell is a better choice for seating in high quality furniture. The K 126 has great characteristics in terms of compression and is a specialized foam for applications such as lining instrument cases. Density is a better measurement of the quality of foam product. By engineering the compounds carefully it is possible to achieve different compressions in the same density, giving a range of feel and cushioning.

Renew™ Foam Renew™ is produced with the Natural Foam Technology™ process, ensuring the consistency and quality you have come to expect only from Carpenter Co. It’s bio-based, allowing you to leave a smaller environmental footprint, while reducing our nation’s dependency on foreign oil. Renew™ is fully recyclable, is PBDE free, and is made without the use of CFC’s. Renew™ is available in a wide assortment of firmness and densities. We’ve even utilized our expertise in manufacturing Qualux™ high resiliency foams to produce the first bio-based HR foam. Endorsed by the Reinhart Technical Center, the performance of Renew™ is second to none. Expect quality and consistency, but don’t expect to sacrifice comfort or the need to re-engineer. The wide range of Renew™ was designed for transparent changes, while allowing mainstream consumers to feel good about the choices they make.

198

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


/8” Landau Underpad White 4499 1

¼” Landau Underpad White 4500

FOA

Foam All

CC

Closed Cell

/8” Landau Underpad White 4501orer cilisi

½” Landau Underpad White 4502

3

• Price Breaks: Yard / Bundle (25) • Unit of measure: Linear yard • Closed cell foam on a continuous roll with a 60” (152.4 cm) width. Sold in cuts by the linear yard. This foam is non-absorbent and resilient. Can be used for backpacking mats, exercise mats, padding for athletic equipment or anything where moisture is a concern.

2” x 30” x 80” Slow Recovery Foam

FOA

Foam All

MI

Miscellaneous

4394

• Price Breaks: Each / Bundle (5) • Unit of measure: Sheet • Visco Elastic slow recovery foam is used in applications such as chiropractic tables, wheelchairs and mattress toppers. Passes CA 117 Bulletin for retardancy test. Recovery time is 15 - 40 seconds. Density is 2.9lbs./cubic foot (0.0464 g/cubic cm), with a compression of 40lbs. (18.1 kg).

Visit www.jennisfabrics.com

199


FOA

Foam All

RE

Regular ½” x 72” x 50’ Cerex Foam 4365 • Price Breaks: Roll • Unit of measure: 50 foot (15.2 m) roll • This is ½” (1.27 cm) regular roll foam with a Cerex backing applied. This is suitable for quilting applications without using a separate backing material. A real time saver on stitched seat panels.

FOA

Foam All

CH

Chip Foam

Polyfoam Chips

4949 • Price Breaks: Bag (20lbs.) / 100lbs. • Unit of measure: Pound • Priced by the pound, sold in complete bags of approximately 20lbs. (9.06 kg) each. Ground foam chip for loose fill applications.

200

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


Rebond Seat

9625

FOA

Foam All

SE

Seating

Rebond Back

9626

• Price Breaks: Each / 5 / 25 • Unit of measure: Each • High density rebond foam molded seat and back for #310 recliner frame #9609.

6” x 26” R 45 Foam Bolster

4397

FOA

Foam All

R4

R 45

8” x 26” R 45 Foam Bolster

4398

• Price Breaks: Each / Bundle (10) • Unit of measure: Each • A cylindrical shaped bolster made of seating grade foam to fabricate bolster cushions.

Visit www.jennisfabrics.com

201


TOO

Tools

CU

Cutters

Accucutter 9” Queen Foam Cutter 4338 • Price Breaks: Each • Unit of measure: Each • High Performance Moderate Cost Foam Cutter • The Accucutter foam cutter is the ideal choice for the smaller shop. This unit cuts very effectively with one stationary and one oscillating blade, as opposed to the two oscillating blades in more expensive units. Features include a heavy duty safety stanchion of 9” (22.9 cm) length and a free standing base of 4” x 6¾” (10.2 cm x 17.1 cm) equipped with glide bearings. An excellent economical solution.

#410 U-Cut Foam Cutter

4341 • Price Breaks: Each • Unit of measure: Each • The Big Job Specialist • This unit will cut from ¼” to 9” (0.6 cm - 22.9 cm) height and up to a 36” (91.4 cm) width. You can bond salvageable pieces of foam together and minimize waste. The blade is held tight under tension from the arms. All that is required is a flat surface to work on, and it is recommended that you secure the piece being cut with a section of weighted plywood or similar. Then simply saw and the 410 will slice the foam cleanly. Replacement blades are available separately. See page 348 for full details.

Bosch Foam Cutter Motor

4343 • Price Breaks: Each • Unit of measure: Each • Premium Quality Bosch Cutter • The Bosch model 1575 foam cutter is the answer for high volume continuous use. It has a slim housing for easier handling and will cut any foam rubber or carpeting. Requires no tools to change blades and has famous Bosch quality. The blades are sold separately. Two sizes are available: 8” (20.3 cm) or 12” (30.5 cm). See page 349 for more information.

202

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


FOA

Foam West

DU

Duron

High Quality Foam with 5 Year Replacement Warranty Duron foam is a high quality product in four different compressions. It has a density of 2.2lbs/cubic foot (0.0352 g/cubic cm) and is available in sheets for use in general upholstery applications such as seating. From soft to extra firm, this product will satisfy your customers needs and budgets. Duron foam has a 5 year replacement warranty under normal service. Please enquire for details.

Duron 426 Soft

• Price Breaks: Sheet / Bundle (see below) • Unit of measure: Sheet • Duron 426 Soft is a 21-27lbs. (9.5-12.2 kg) compression foam suitable for chair backs. Bundles: #4403 - 7/bundle, #4404 - 5/bundle, #4405 - 7/bundle, #4406 - 7/ bundle.

2” x 24” x 80” 3” x 24” x 80” 4” x 24” x 80” 5” x 24” x 80”

Duron 533 Medium

4403 4404 4405 4406

• Price Breaks: Sheet / Bundle • Unit of measure: Sheet • Suitable for use as mattresses or soft seats. 28-34lbs. (12.7-15.4 kg) compression. Bundles: #4410 - 4/bundle, #4467 - 4/bundle, #4542 - 3/bundle, #4543 - 4/bundle.

4” x 54” x 72” 4” x 24” x 80” 5” x 24” x 80” 6” x 24” x 72”

4410 4467 4542 4543

Visit www.jennisfabrics.com

203


FOA

Foam West

DU

Duron

Duron 639 Firm

• Price Breaks: Each / Bundle (see below) • Unit of measure: Sheet • Duron 639 Firm is a 47-52lbs. (21.3-23.6 kg) compression foam suitable for seating. Bundles: #4441 - 12/bundle, #4408 - 7/bundle, #4411 - 5/bundle, #4412 - 4/bundle, #4413 - 3/bundle, #4426 - 4/bundle.

1” x 24” x 80” 2” x 24” x 80” 3” x 24” x 80”

Duron 639 Firm

4441 4408 4411

4” x 24” x 80” 5” x 24” x 80” 4” x 26” x 80”

4412 4413 4426

• Price Breaks: Each / Bundle (see below) • Unit of measure: Sheet • Duron 639 Firm is a 47-52lbs. (21.3-23.6 kg) compression foam suitable for seating. Bundles: #4434 - 12/bundle, #4436 - 7/bundle, #4438 - 5/bundle, #4439 - 4/bundle. #4440 - 3/bundle.

1” x 60” x 80” 2” x 60” x 80” 3” x 60” x 80”

Duron 766 X-Firm

4434 4436 4438

4” x 60” x 80” 5” x 60” x 80”

4439 4440

• Price Breaks: Each / Bundle (see below) • Unit of measure: Sheet • Duron 766 X-Firm is a 52-62lbs. (23.6-28.1 kg) compression foam, suitable for benches, heavy equipment seating, etc. Bundles: #4414 - 12/bundle, #4415 - 7/bundle, #4432 - 5/bundle, #4568 - 4/bundle.

1” x 24” x 72” 2” x 24” x 72” 3” x 24” x 72” 4” x 24” x 72”

204

4414 4415 4432 4568

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


Rebond

FOA

Foam West

RB

Rebond

FOA

Foam West

SU

Supersoft

• Price Breaks: Sheet / Bundle (see below) • Unit of measure: Sheet • Rebond or bond foam is a product made from foam chips mixed with a high percentage of adhesive under pressure creating a very firm, dense foam. Density is 5lbs./cubic foot (0.08 g/cubic cm), more than twice that of most seating foams. It is ideal for seating on heavy equipment, snowmobiles, and other applications requiring a dense, firm foam. Bundles: #4388 - 5/bundle, #4389 - 5/bundle, #4390 - 5/bundle, #4391 - 4/bundle.

1” x 24” x 72” 2” x 24” x 72” 3” x 24” x 72” 4” x 24” x 72”

Supersoft

4388 4389 4390 4391

• Price Breaks: Sheet / Bundle • Unit of measure: Sheet • Supersoft foam has as density of 1.1lbs/cubic foot (0.0176 g/cubic cm) and a compression of 15-20lbs. (6.8-9.1 kg). This renders it very soft and supple. Too soft for seat use by itself but perfect for laminating with denser foams to give initial plushness followed by firm support. Sheet sizes identical to regular foam. Bundles: #4359 - 7/ bundle, #4360 - 5/bundle, #4361 - 4/bundle

2” x 54” x 72” 3” x 54” x 72” 4” x 54” x 72”

4359 4360 4361 Visit www.jennisfabrics.com

205


FOA

Foam West

RE

Regular Regular Foam

• Price Breaks: Each / Bundle (see below) • Unit of measure: Sheet • Industry standard grade for general purpose polyurethane foam is 1.3lbs./cubic foot (0.0208 g/cubic cm) density foam. A compression of 34-40lbs. (15.4-18.1 kg). Used in chair backs, padding and bolstering. Not recommended for seating. Bundles: #4349 12/bundle, #4350 - 7/bundle, #4351 - 5/bundle, #4352 - 4/bundle, #4353 - 3/bundle.

1” x 54” x 72” 2” x 54” x 72” 3” x 54” x 72”

Regular Foam Rolls

4349 4350 4351

4” x 54” x 72” 5” x 54” x 72”

4352 4353

• Price Breaks: Each • Unit of measure: Roll • Industry standard grade for general purpose polyurethane foam is 1.3lbs./cubic foot (0.0208 g/cubic cm) density foam. A compression of 34-40lbs. (15.4-18.1 kg). Used in chair backs, padding and bolstering. Not recommended for seating.

¼” x 54” x 50’ ½” x 54” x 50’ 1” x 54” x 50’ 2” x 54” x 25’

206

4364 4366 4367 4368

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


FOA

Foam West

R4

R 45

FOA

Foam West

H1

H 100

R 45 • Price Breaks: Sheet / Bundle (see below) • Unit of measure: Sheet • R 45 foam has a density of 1.5lbs./cubic foot (0.25 g/cubic cm) and a compression of 41-47lbs. (18.6-21.3 kg). It is the minimum recommended grade for residential seating. Bundles: #4354 - 12/bundle, #4385 - 7/bundle, #4386 - 5/bundle, #4357 - 4/bundle, #4358 - 3/bundle.

1” x 54” x 80” 2” x 54” x 80” 3” x 54” x 80”

4354 4385 4386

4” x 54” x 80” 5” x 54” x 80”

4357 4358

H 100 (Edmonton Only) • Price Breaks: Roll • Unit of measure: 50 foot (15.2 m) roll • H 100 grey extra firm foam has a density of 1.8lbs./cubic foot (0.0288 g/cubic cm). Intended as a lining for instrument cases and other similar high impact applications.

4374 ½” x 72” x 50’ 1” x 72” x 50’ 4375 Edmonton Only

Visit www.jennisfabrics.com

207


FOA

Foam West

MA

Mattress

Mattress

• Price Breaks: Sheet / 3 • Unit of measure: Sheet • 2lbs.cubic foot (0.032 g/cubic cm) density foam, medium compression with a 5 year replacement warranty. The waterbed size will fit most waterbed frames, saving time and money. Note: Courier shipments are sent at customers risk.

6” x 39” x 75” Single 4416 6” x 54” x 75” Double 4417 6” x 60” x 80” Queen 4418

Convluted Foam

• Price Breaks: Each / 6 • Unit of measure: Sheet • ¾” (1.9 cm) convoluted or “egg crate” foam. 2lbs. (0.032 g/cubic cm) density with a soft compression. Intended used is to be laminated into mattress foam (sizes match) to give added plushness and to create some air flow for better cooling and comfort.

1¼”- ½” x 39” x 75” 1¼”- ½” x 54” x 75” 1¼”- ½” x 60” x 80”

208

4423 4424 4425

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


FOA

Foam West

K1

K126

FOA

Foam West

UL

Ultra

K 126 • Price Breaks: Sheet / Bundle (see below) • Unit of measure: Sheet • K 126 Grey is the firmest open cell foam available. Used for gun cases, protective packaging, instrument packaging, etc. High impact applications. The minimum compression is 125lbs. (56.6 kg). 2lbs./cubic foot (0.032 g/cubic cm) density. Bundles: #4433 - 12/bundle, #4435 - 12/bundle, #4437 - 7/bundle.

½” x 24” x 72” 1” x 24” x 72” 2” x 24” x 72”

4433 4435 4437

Ultra 1.8 Firm • Price Breaks: Sheet / Bundle (see below) • Unit of measure: Sheet • Ultra 1.8 Firm has a lower density of 1.8lbs./cubic foot (0.0288 g/cubic cm) and a compression of 41-46lbs. (18.6-20.8 kg). It is wider for larger cushions. Passes CA 117Sec. E. Bundles: #4211 - 12/bundle, #4212 - 7/bundle, #4213 - 5/bundle, #4214 - 4/ bundle, #4215 - 3/bundle.

1” x 24” x 80” 2” x 24” x 80” 3” x 24” x 80”

4211 4212 4213

4” x 24” x 80” 5” x 24” x 80”

4214 4215

Visit www.jennisfabrics.com

209


FOA

Foam West

QU

Qualux

Qualux 25 Soft • Price Breaks: Sheet / Bundle (see below) • Unit of measure: Sheet • Qualux 25 Soft has a density of 2.8lbs./cubic foot (0.0048 g/cubic cm) and a compression of 19-25lbs. (7.7-9.1 kg). This foam passes CA-117-Sec. E. Bundles: #4218 - 7/bundle, #4219 - 5/bundle, #4220 - 4/bundle.

2” x 22” x 80” 3” x 22” x 80” 4” x 22” x 80”

Qualux 34 Medium

4218 4219 4220

• Price Breaks: Each / Bundle (see below) • Unit of measure: Sheet • Qualux 34 Medium has a density of 2.6lbs./cubic foot (0.0416 g/cubic cm) and a compression of 34-40lbs. (11.8-13.6 kg). This foam passes CA 117 - Sec. E. Bundles: #4224 - 12/bundle, #4225 - 7/bundle, #4226 - 5/bundle, #4227 - 4/bundle. #4228 3/bundle.

1” x 22” x 80” 2” x 22” x 80” 3” x 22” x 80”

Qualux 46 Firm

4224 4225 4226

4” x 22” x 80” 5” x 22” x 80”

4227 4228

• Price Breaks: Each / Bundle (see below) • Unit of measure: Sheet • 2.6lbs./cubic foot (0.0416 g/cubic cm) density and a compression of 41-46lbs. (18.620.8 kg). Passes CA 117-Sec. E. Bundles: #4230 - 12/bundle, #4231 - 7/bundle, #4232 - 5/bundle, #4233 - 4/bundle, #4234 - 3/bundle, #4266 - 7/bundle, #4267 - 5/bundle, #4268 - 4/bundle.

1” x 22” x 80” 2” x 22” x 80” 3” x 22” x 80” 4” x 22” x 80” 210

4230 4231 4232 4233

5” x 22” x 80” 2” x 24” x 80” 3” x 24” x 80” 4” x 24” x 80”

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS

4234 4266 4267 4268


FOA

Foam West

MI

Micellaneous

FOA

Foam East

UL

Ultra

J 39 • Price Breaks: Sheet / Bundle • Unit of measure: Sheet • Bundles: #4356 - 10/bundle, #4355 - 7/bundle. • J 39 (Regular) foam has a density of 1.3lbs./cubic foot (0.0208 g/cubic cm) and a compression of 34-40lbs. (15.4-18.1 kg).

1” x 50” x 72” 2” x 50” x 72”

4356 4355

Ultra 1.8 Firm • Price Breaks: Sheet / Bundle (see below) • Unit of measure: Sheet • Ultra 1.8 Firm has a lower density of 1.8lbs./cubic foot (0.0288 g/cubic cm) and a compression of 41-46lbs. (18.6-20.8 kg). It is wider for larger cushions. Passes CA 117Sec. E. Bundles: #4666 - 6/bundle, #4667 - 5/bundle, #4668 - 4/bundle.

2” x 24” x 88” 3” x 24” x 88” 4” x 24” x 88”

4666 4667 4668

Visit www.jennisfabrics.com

211


FOA

Foam East

RB

Rebond Rebond

• Price Breaks: Sheet / Bundle (see below) • Unit of measure: Sheet • Rebond or bond foam is a product made from foam chips mixed with a high percentage of adhesive under pressure creating a very firm, dense foam. Density is 3lbs./cubic foot (0.048 g/cubic cm), more than twice that of most seating foams. It is ideal for seating on heavy equipment, snowmobiles, and other applications requiring a dense, firm foam. Bundles: #4640 - 12/bundle, #4645 - 7/bundle, #4650 - 5/bundle, #4655 - 4/bundle.

1” x 24” x 72” 2” x 24” x 72” 3” x 24” x 72” 4” x 24” x 72”

FOA

Foam East

SU

Supersoft Supersoft

4640 4645 4650 4655

• Price Breaks: Each / Bundle (see below) • Unit of measure: Sheet • 1.1lbs/cubic foot (0.0176 g/cubic cm) density and a compression of 15-20lbs. (6.89.1 kg). This renders it very soft and supple. Too soft for seat use by itself but perfect for laminating with denser foams to give initial plushness followed by firm support. Bundles: #4637 - 5/bundle, #4638 - 4/bundle.

3” x 22” x 74” 4” x 22” x 74”

212

4637 4638

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


Curon C25

FOA

Foam East

CU

Curon

• Price Breaks: Sheet / Bundle (see below) • Unit of measure: Sheet • Curon C25 has a density of 2.0lbs./cubic foot (0.0320 g/cubic cm) and a compression range of 25lbs. (11.3 kg). Bundles: #4660 - 4/bundle, #4661 - 3/bundle, #4679 - 3/ bundle, #4680 - 3/bundle, #4681 - 3/bundle.

4660 4661 4679 4680 4681

4” x 22” x 88” 5” x 22” x 88” 5” x 26” x 88” 6” x 22” x 88” 6” x 26” x 88”

Curon C35

• Price Breaks: Sheet / Bundle (see below) • Unit of measure: Sheet • Curon C35 has a density of 2.0lbs./cubic foot (0.0320 g/cubic cm) and a compression range of 28-35lbs. (12.7-15.9 kg). Bundles: #4674 - 5/bundle, #4675 - 3/bundle, #4676 - 3/bundle, #4682 - 3/bundle, #4682 - 3/bundle, #4684 - 3/bundle.

4674 4675 4676

3” x 24” x 88” 4” x 22” x 88” 5” x 22” x 88”

Curon C45

5” x 26” x 88” 6” x 22” x 88” 6” x 26” x 88”

4682 4683 4684

• Price Breaks: Sheet / Bundle (see below) • Unit of measure: Sheet • Curon C45 has a density of 2.0lbs./cubic foot (0.0320 g/cubic cm) and a compression range of 47-52lbs. (21.3-23.6 kg). Bundles: #4663 - 12/bundle, #4664 - 7/bundle, #4665 - 5/bundle, #4669 - 4/bundle, #4671 - 3/bundle, #4677 - 3/bundle, #4678 - 4/bundle.

1” x 22” x 88” 2” x 22” x 88” 3” x 22” x 88” 4” x 22” x 88”

4663 4664 4665 4669

5” x 22” x 88” 4” x 26” x 88” 4” x 24” x 88”

4671 4677 4678

Visit www.jennisfabrics.com

213


FOA

Foam East

QU

Qualux

Qualux 26 Soft • Price Breaks: Sheet / Bundle (see below) • Unit of measure: Sheet • Qualux 25 Soft has a density of 2.8lbs./cubic foot (0.0048 g/cubic cm) and a compression of 19-25lbs. (7.7-9.1 kg). This foam passes CA-117-Sec. E. Bundles: #4719 - 4/bundle, #4720 - 3/bundle.

4” x 22” x 88” 5” x 22” x 88”

Qualux 31 Medium

4719 4720

• Price Breaks: Each / Bundle (see below) • Unit of measure: Sheet • Qualux 34 Medium has a density of 2.6lbs./cubic foot (0.0416 g/cubic cm) and a compression of 34-40lbs. (11.8-13.6 kg). This foam passes CA 117 - Sec. E. Bundles: #4722 - 7/bundle, #4723 - 5/bundle, #4725 - 4/bundle, #4726 - 3/bundle.

2” x 22” x 88” 3” x 22” x 88” 4” x 22” x 88” 5” x 22” x 88”

Qualux 41 Firm

4722 4723 4725 4726

• Price Breaks: Each / Bundle (see below) • Unit of measure: Sheet • 2.6lbs./cubic foot (0.0416 g/cubic cm) density and a compression of 41-46lbs. (18.620.8 kg). Passes CA 117-Sec. E. Bundles: #4230 - 12/bundle, #4727 - 12/bundle, #4728 - 12/bundle, #4729 - 5/bundle, #4730 - 4/bundle, #4731 - 3/bundle.

1” x 22” x 88” 2” x 22” x 88” 3” x 22” x 88”

214

4727 4728 4729

4” x 22” x 88” 5” x 22” x 88”

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS

4730 4731


FOA

Foam East

QU

Qualux

FOA

Foam East

RE

Regular

Qualux 18 • Price Breaks: Sheet / Bundle (4) • Unit of measure: Sheet • Qualux 18 has a density of 2.25-2.35lbs./cubic foot and a compression of 14-20lbs. (7.7-9.1 kg). This foam passes CA-117-Sec. E and UFAC Class 1. 4/bundle.

4” x 22” x 88”

4685

Regular Foam • Price Breaks: Each / Bundle (see below) • Unit of measure: Sheet • Industry standard grade for general purpose polyurethane foam is 1.3lbs./cubic foot (0.0208 g/cubic cm) density foam. A compression of 34-40lbs. (15.4-18.1 kg). Used in chair backs, padding and bolstering. Not recommended for seating. Bundles: #4620 12/bundle, #4625 - 7/bundle, #4630 - 5/bundle, #4635 - 4/bundle.

1” x 24” x 72” 2” x 24” x 72” 3” x 24” x 72” 4” x 24” x 72”

4620 4625 4630 4635

Regular Foam Rolls • Price Breaks: Each • Unit of measure: Roll • Industry standard grade for general purpose polyurethane foam is 1.3lbs./cubic foot (0.0208 g/cubic cm) density foam. A compression of 34-40lbs. (15.4-18.1 kg). Used in chair backs, padding and bolstering. Not recommended for seating.

¼” x 54” x 48’ ½” x 54” x 48’ 1” x 54” x 48’

4369 4370 4372

Visit www.jennisfabrics.com

215


FR

Frames

MI

Miscellaneous Sectional Connector

3035 • Price Breaks: Each / 10 • Unit of measure: Each • Join sectional upholstered furniture with this clever connector. • There are two parts included in each connector; one mounts on each section and then they are joined by pushing the pieces together. Just lift the catch fork to separate and it will swivel down out of sight. When not in use, the connector is completely hidden.

3/8” x 2” Dowel Pins Birch

4031

½” x 2” Dowel Pins Birch

4033

• Price Breaks: Package / 10 • Unit of measure: Package of 50

SPR

Springs

HI

Hide-A-Bed Hide-A-Bed Units

• Price Breaks: Each / 20 • Unit of measure: Each • Contract frames are heavier duty for use in the hospitality industry. Residential duty are an economical replacement for worn or damaged units or for use in more affordable units. See the Springs section on page 281 for more information.

Contract Double Contract Queen Residential Double Residential Queen 216

7389 7390 7392 7393

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


GRO

Grommets

CR

Cruiser

Grommets Cruiser brand grommets are a popular brand based on a European Metric sizing system, however, the sizes are very close to the Standard system normally used. For comparison of sizes, we list these grommets in Standard sizes. We stock two different brands of grommets. There is little difference between the Cruiser and Osborne brands. The main factor in choosing a line of grommets relates to the dies that you may already have. One note is that the spur grommets in the Osborne line have a protective rolled rim on the grommet, which the Cruiser line doesn’t have. Either one gives excellent resistance to pulling out.

#1 Brass Grommets 6113

#2 Brass Grommets 6115

#3 Brass Grommets 6117rer cilisi

• Price Breaks: Gross / 10 / 50 • Unit of measure: Gross (144 sets of grommets and washers) • Cruiser plain brass grommet. • Grommets shown are roughly to scale.

Inside diameter: #1 (5/16”)

#1 Spur Brass Grommets 6123

#2 Spur Brass Grommets 6125

#2 (⅜”)

#3 (13/32”)

TO SCALE

#3 (13/32”)

TO SCALE

#3 Spur Brass Grommets 6127orer cilisi

• Price Breaks: Gross / 10 / 50 • Unit of measure: Gross (144 sets of grommets and washers) • Cruiser spur brass grommet. • Grommets shown are roughly to scale.

Inside diameter: #1 (5/16”)

#2 (⅜”)

Visit www.jennisfabrics.com

217


TOO

Tools

CR

Cruiser #1 Plain Grommet Hand Setting Die 6145

#2 Plain Grommet Hand Setting Die 6147

#3 Plain Grommet Hand Setting Die 6149orer cilisi

• Price Breaks: Each • Unit of measure: Each • Hand setting tools for the Cruiser brand plain grommets. Each set consists of two parts, the punch and the die. Note that the spur and the plain dies are not interchangeable. You must have the specified die for each type.

#1 Spur Grommet Hand Setting Die 6155

#2 Spur Grommet Hand Setting Die 6157

#3 Spur Grommet Hand Setting Die 6159orer cilisi

• Price Breaks: Each • Unit of measure: Each • Grommet setting tools for the Cruiser brand grommets. These require a special die as setting the teeth on the spur washer uses a slightly different size and die face from the plain.

Important Notice for Die Longevity Never strike a cutter or die with a metal hammer. Always use a rubber or composite mallet for hole punching or setting grommets or fasteners. A steel hammer strikes such a severe blow that the metal in the dies absorbs the entire shock and begins to crystallize. This crystallization weakens the dies, which will become brittle and fail prematurely. For longer life from you cutters and dies, see page 222 for the rubber mallet.

218

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


Osborne Plain Sheet Grommets

GRO

Grommets

OS

Osborne

• Price Breaks: Gross / 5 / 25 • Unit of measure: Gross (144 sets of grommets and washers) • Osborne quality brass grommets and washers. To be used with Osborne dies. Will not work with Cruiser brand dies.

Hole Diameter

#00 Brass #00 Black Oxide #0 Brass #0 Black Oxide #0 Nickel Plated #1 Brass

#00

#0

/16” 3 /16” ¼” ¼” ¼” 9 /32” 3

#1

Hole Diameter

5017 5035 5014 5039 5040 5011

#1 Nickel Plated #2 Brass #2 Nickel Plated #3 Brass #4 Brass #5 Brass

#2

#3

/32” /8” 3 /8” 7 /16” ½” 5 /8” 9 3

#4

Visit www.jennisfabrics.com

6075 5012 6076 5013 5015 5016

#5

TO SCALE

219


GRO

Grommets

OS

Osborne

Osborne Rolled Rim Spur Grommets

• Price Breaks: Gross / 5 / 25 • Unit of measure: Gross (144 sets of grommets and washers) • Note: Rolled rim grommets have an extra lip on the rim of the grommet that accepts the spurs of the washer to give the ultimate pull out resistance.

Hole Diameter

#0 Spur Brass /32” 13 #1 Spur Brass /32” #1 Spur Nickel Plated 13/32” 7 #2 Spur Brass /16” 9

TO SCALE

220

#0

#1

#2

#3

6064 6066 6080 6065

Hole Diameter

#2 Spur Nickel Plated 7/16” 15 /32” #3 Spur Brass #3 Spur Nickel Plated 15/32” 9 /16” #4 Spur Brass

#4

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS

6081 6061 6082 6062


TOO

Tools

OS

Osborne

Hole Cutter • Price Breaks: Each • Unit of measure: Each • Hole cutters for use with the Cruiser and Osborne grommets. Be sure to use with a soft surface underneath, ideally a hole cutting pad (#6120, page 225). These cutters will work with either the Cruiser or the Osborne grommets. Simply size them to the hole you need either by diameter or by grommet number (1-A cutter is for #1 grommet).

#00-A 3/16” #0-A ¼” #1-A 9/32” #2-A 3/8”

5059 5024 5031 5032

5033 5037 5038

#3-A 7/16” #4-A ½” #5-A 5/8”

Osborne Plain Grommet Hand Setting Dies

• Price Breaks: Each • Unit of measure: Each • Hand setting tools for the Osborne brand plain grommets. Each set consists of two parts: the punch and the die. Note that the spur and plain are not interchangeable; you must have the specified die for each type.

#00 Plain Die 3/16” #0 Plain Die ¼” #1 Plain Die 9/32” #2 Plain Die 3/8”

5020 5034 5021 5022

#3 Plain Die 7/16” #4 Plain Die ½” #5 Plain Die 5/8”

Osborne Spur Grommet Hand Setting Dies

5023 5025 5026

• Price Breaks: Each • Unit of measure: Each • Grommet setting tools for the Osborne brand spur grommets. These require a special die as setting the teeth on the spur washer uses slightly different size and die face from the plain, and must ensure the spur teeth fit into the rolled rim for maximum strength.

#0 Spur Die 9/32” #1 Spur Die 13/32” #2 Spur Die 7/16”

5019 5055 5028

#3 Spur Die 15/32” #4 Spur Die 9/16”

5027 5029

Visit www.jennisfabrics.com

221


GRO

Grommets

SP

Self Piercing Self Piercing Brass Grommets

• Price Breaks: Package / 5 / 10 • Unit of measure: Package of 100 (sets of grommets and washers) • Save time and cutter costs. Brass grommets with a special self piercing finish on the grommet top. No pre-cutting of holes required, simply line up grommets and press with one of the tools listed on the next page. System works with even heavy industrial materials. Sizes given are the finished inside holes sizes, and can be compared to similar hole sizes in Osborne grommets.

¼” Brass 5 /16” Brass 3 /8” Brass ½” Brass

TOO

Tools

MA

Mallets

#6 Rubber Mallet

5045 5046 5047 5048

/16” Brass /16” Nickel Plated 3 /8” Nickel Plated ½” Nickel Plated 9 5

5049 5041 5042 5043

5317 • Price Breaks: Each / 6 • Unit of measure: Each • This is the tool you need for punching holes, setting grommets and snap fasteners. Extend life of your expensive tools and dies. • Never strike a cutter or die with a metal hammer. Always use a rubber or composite mallet for hole punching or setting grommets or fasteners. A steel hammer strikes such a severe blow that the metal in the dies absorbs the entire shock and begins to crystallize. This crystallization weakens the dies, which will become brittle and fail prematurely.

222

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


PM5 Bench Snap/Grommet Machine 5030

TOO

Tools

SP

Self Piercing

• Price Breaks: Each • Unit of measure: Each • This sturdy machine will set self piercing grommets and will also accommodate snap fasteners with a separate set of dies. If you are only going to have one machine on your bench, this should be the one. Has a deeper throat and longer padded handle. Approximate height once bolted to the workbench is 12” (30.5 cm). Dies sold separately, see below. • Note: This machine must be bolted to the bench, it is not portable. If you require a portable machine, use the aluminum machine listed below.

Alum PM5 Snap/Grommet Machine 5057

• Price Breaks: Each • Unit of measure: Each • A lightweight aluminum version of the PM5 machine listed above . Will work with all the same dies for snaps or our full line of self piercing grommets. Suitable for portable use when mounted on a small plywood platform for stability. Dies sold separately.

PM5 Machine Dies • Price Breaks: Each • Unit of measure: Each • Die sets for the self piercing grommets. Each grommet size requires its own dies.

¼” Die 5 /16” Die 3 /8” Die

5052 5054 5056

½” Die 9 /16” Die

5058 5060

Visit www.jennisfabrics.com

223


GRO

Grommets

MI

Miscellaneous #1 Vents and Washers 9021 • Price Breaks: Gross / 5 • Unit of measure: Gross (144 sets) • Brass ¾” (1.9 cm) vents and washers for use in mattresses, upholstery and any other application where airflow is a concern. Requires the special die list on the next page to set.

Sewable Black Grommet

5075 • Price Breaks: Each / 25 / 100 • Unit of measure: Each • Heavy duty, sewable, black grommet can be sewn into seams. Has a cold crack of -20°C (-4°F). Some uses include sporting bags and duffel bags, as well as tents.

224

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


#621 Vent Die

TOO

Tools

GR

Grommets

9022

• Price Breaks: Each • Unit of measure: Each • This special die quickly sets #9021 ventilators listed on the previous page. Merely punch your hole, set the ventilator with the neck up on the base, and then slip the fabric in place. A few even taps with a mallet will set the vent.

Hole Cutting Pad

6120

• Price Breaks: Each • Unit of measure: Each • Extend Cutter Life • Get the full distance from your cutters by using this pad under the material you are punching. The special surface absorbs the impact and allows the cutter to cut the material, not the bench underneath. Cutters stay sharper and last longer. For maximum life of your cutters and die setting equipment, always use a rubber mallet and not a steel hammer to set fasteners, grommets or to hole punch. Approximately 10” x 10” x 5/16” thick (25.4 x 25.4 x 0.8 cm)

Visit www.jennisfabrics.com

225


LEG

Legs

BA

Ball & Claw

8” Ball & Claw w/o Block (Unfinished) 5225

9” Ball & Claw w/ Block (Unfinished) 5228

8” Ball & Claw w/o Block (Walnut Finish) 5246er cilisi

9” Ball & Claw w/ Block (Walnut Finish) 5448

• Price Breaks: Each / 10 / 100

• Price Breaks: Each / 10 / 100

• Price Breaks: Each / 10 / 100

• Price Breaks: Each / 10 / 100

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

• Rubber tree wood. 3½” x 8” (8.9 x 20.3 cm)

• Rubber tree wood. 3⅝” x 12” (9.2 x 30.5 cm)

• Polished walnut finish.

• Polished walnut finish.

• Rubber tree wood. 3⅝” x 8” (9.2 x 20.3 cm)

• Rubber tree wood. 3⅝” x 12” (9.2 x 30.5 cm)

LEG

Legs

BK

Back Leg 6” Curved Leg Walnut

5285

6” Curved Leg Unfinished

• Price Breaks: Each / 10 / 48 • Unit of measure: Each • Rubber tree wood.

226

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS

5286


6” Queen Anne Leg w/ Bolt (Unfinished) 5219

6” Queen Anne Leg w/ Bolt (Walnut Finish) 5240

LEG

Legs

QU

Queen Anne

6” Queen Anne Leg w/o Block (Unfinished) 5227olorer cilisi

8” Queen Anne Leg w/ Block (Unfinished) 5247

• Price Breaks: Each / 10 / 100

• Price Breaks: Each / 10 / 100

• Price Breaks: Each / 10 / 100

• Price Breaks: Each / 10 / 100

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

• 2⅞” x 6” (7.3 x 15.2 cm)

• 2⅞” x 6” (7.3 x 15.2 cm)

• 3¾” x 6” (9.5 x 15.2 cm)

• 3⅝” x 11” (9.2 x 27.9 cm)

8” Queen Anne Leg w/ Block (Walnut Finish) 5248

8” Queen Anne Leg w/o 8” Queen Anne Leg w/o Block (Unfinished) Block (Walnut Finish) 5226 5244orer cilisi

9” Queen Anne Leg w/ Bolt (Unfinished) 5222

• Price Breaks: Each / 10 / 100

• Price Breaks: Each / 10 / 100

• Price Breaks: Each / 10 / 100

• Price Breaks: Each / 10 / 100

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

• 3⅝” x 11” (9.2 x 27.9 cm)

• 3⅝” x 8” (9.2 x 20.3 cm)

• 3⅝” x 8” (9.2 x 20.3 cm)

• 2½” x 9” (6.4 x 22.9 cm)

9” Queen Anne Leg w/ Bolt (Walnut Finish) 5241

9” Queen Anne Leg w/ Block (Unfinished) 5224

9” Queen Anne Leg w/o Block (Unfinished) 5220r cilisi

9” Queen Anne Leg w/o Block (Walnut Finish) 5245

• Price Breaks: Each / 10 / 100

• Price Breaks: Each / 10 / 100

• Price Breaks: Each / 10 / 100

• Price Breaks: Each / 10 / 100

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

• 2½” x 9” (6.4 x 22.9 cm)

• 3½” x 12” (8.9 x 30.5 cm)

• 3⅝” x 9” (9.2 x 22.9 cm)

• 3⅝” x 9” (9.2 x 22.9 cm)

Visit www.jennisfabrics.com

227


LEG

Legs

BU

Bun

2½” Regular Bun Leg (Unfinished) 5229

2½” Regular Bun Leg (Walnut Finish) 5230

2½” Premium Bun Leg (Unfinished) 5200lisi

2½” Premium Bun Leg (Walnut Finish) 5201

• Price Breaks: Each / 10 / 40

• Price Breaks: Each / 10 / 40

• Price Breaks: Each / 10 / 40

• Price Breaks: Each / 10 / 40

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

• Diameter at widest: 4¾” (12.1 cm).

• Diameter at widest: 4¾” (12.1 cm).

• Diameter: 5” (12.1 cm).

• Diameter: 5” (12.1 cm).

• Economical choice

• Economical choice

• Slightly more expensive but doesn’t have minor blemishes sometimes found in bun legs.

• Slightly more expensive but doesn’t have minor blemishes sometimes found in bun legs.

1¾” x 3¾” Bun Leg (Walnut Finish) 4986

2” x 5” Bun Leg w/ Bolt (Unfinished) 4990

2” x 5” Bun Leg w/ Bolt (Walnut Finish) 4991r cilisi

2” x 7” Bun Leg w/ Bolt (Unfinished) 4992

• Price Breaks: Each /10 / 40

• Price Breaks: Each /10 / 40

• Price Breaks: Each /10 / 40

• Price Breaks: Each /10 / 40

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

2½” Double Leg Bun

5281 • Price Breaks: Each / 10 / 40 • Unit of measure: Each • 5½” (14 cm) diameter.

228

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


5” Contour Leg (Unfinished)

5204

LEG

Legs

CO

Contour

5” Contour Leg (Walnut Finish) 5203

• Price Breaks: Each / 10 / 100 • Unit of measure: Each • Height (not including bolt): 4⅞” (12.4 cm), diameter: 3¾” (9.5 cm).

5” Large Candle Leg (Unfinished) 5279

5” Large Candle Leg (Walnut Finish) 5278

• Price Breaks: Each / 10 / 24 • Unit of measure: Each • Height (not including bolt): 5” (12.7 cm).

3½” Small Candle Leg (Unfinished) 5277

3½” Small Candle Leg (Walnut Finish) 5275

3½” Small Candle Leg (Natural Finish) 5276rer cilisi

• Price Breaks: Each / 10 / 40 • Unit of measure: Each • Height: 3½” (8.9 cm), diameter at widest: 3¾” (9.5 cm), diameter at base: 3⅛” (8.1 cm).

Visit www.jennisfabrics.com

229


LEG

Legs

RO

Round

Round Legs (Walnut Finish) • Price Breaks: Each / 48 / Case (see below) • Unit of measure: Each • Case: #5207, #5208, #5209, #5211: 400; #5213, #5215, #5216: 200; #5217: 100 • For residential furniture. Walnut finish and hanger bolt mounting. Industry standard for mounting into T-nuts. Hanger bolt length is about 1½” (3.81 cm) with 5/16” (0.79 cm) thread.

1½” Round Leg 2” Round Leg 2½” Round Leg 3” Round Leg

LEG

Legs

MI

Miscellaneous 12° Angle Leg Plate

5207 5208 5209 5211

4” Round Leg 5” Round Leg 5½” Round Leg 6” Round Leg

5213 5215 5216 5217

5237 • Price Breaks: Package / 4 / 20 • Unit of measure: Package of 25 • Steel plates for mounting onto flat surfaces at 12° angle. Use five wood screws for secure placement.

230

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


2¾” x 3½” Tapered Leg (Unfinished) 4987

2¾” x 3½” Tapered Leg (Natural Finish) 4995

LEG

Legs

TA

Tapered

2¼” x 3” Tapered Leg w/ 2¼” x 3” Tapered Leg w/ Bolt (Unfinished) Bolt (Natural Finish) 4988olorer cilisi 4996

• Price Breaks: Each / 10 / 75

• Price Breaks: Each / 10 / 38

• Price Breaks: Each / 10 / 72

• Price Breaks: Each / 10 / 50

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

2¼” x 5” Tapered Leg (Unfinished) 4997

2¼” x 5” Tapered Leg (Natural Finish) 4994

• Price Breaks: Each / 10 / 45 • Unit of measure: Each • Smoothly contoured tapered leg with two recessed mounting holes for attaching to frames using wood screws.

4” Square Tapered Leg (Unfinished) 5287

4” Square Tapered Leg (Walnut Finish) 5289

4” Square Tapered Leg (Natural Finish) 5288rer cilisi

• Price Breaks: Each / 10 / 60 • Unit of measure: Each

Visit www.jennisfabrics.com

231


LEG

Legs

PL

Plastic 1½” Plastic Leg Black

5250

2” Plastic Leg Black

5255

• Price Breaks: Each / 48 / 200 • Unit of measure: Each • High impact black plastic legs with push in stem for mounting

½” Plastic Glide Leg Black 5265

1½” Plastic Glide Leg Black 5251

2” Plastic Glide Leg Black 5256orer cilisi

• Price Breaks: Each / 48 / 200 • Unit of measure: Each • High impact plastic with screw in mounting.

1½” Plastic Steel Leg Black

5253 • Price Breaks: Each / 48 / 200 • Unit of measure: Each • High impact black plastic leg. Push in style stem includes a steel insert for extra strength during shipping or moving of furniture.

232

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


LEG

Legs

PL

Plastic

LEG

Legs

PR

Protector

2” Plastic Screw-In Leg Black 5258 • Price Breaks: Each / 24 / 100 • Unit of measure: Each • High impact plastic with screw-in mounting. Screws not included.

2¼” Plastic Square Taper Leg Brown 5260

• Price Breaks: Each / 48 / 200 • Unit of measure: Each • High impact plastic leg in modern design and texture. Stemless with screw-in mounting.

Hole Finder White

5290

• Price Breaks: Each / 10 • Unit of measure: Each • Hole finder for locating bolt holes in the bottom of furniture and protecting decking. 1⅝” (4.1 cm) diameter with ½” (1.3 cm) hole.

Visit www.jennisfabrics.com

233


LEG

Legs

ME

Metal

#10 5” (127 mm) Metal Leg 5081

#47 4¾” (120 mm) Metal Leg 5086

#67 4¾” (120 mm) Metal Sofa Leg 5088si

#127 5” (127 mm) Metal Leg 5091

• Price Breaks: Each / 10 / 30

• Price Breaks: Each / 10 / 30

• Price Breaks: Each / 10 / 30

• Price Breaks: Each / 10 / 30

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

• Decorative, cast aluminum leg.

• Decorative, cast aluminum leg. Contains a removable bolt for easier installation.

• A contemporary style, cast aluminum leg. Comes with a removable plate for easier installation.

• A decorative style, cast aluminum leg. Contains a removable bolt for easier installation.

#132 57/8” (151 mm) Metal Leg 5093

#175 5¼” (132 mm) Metal Leg 5095

#191 4” (100 mm) Metal Leg 5097r cilisi

• Price Breaks: Each /10 / 30

• Price Breaks: Each /10 / 30

• Price Breaks: Each /10 / 30

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

• A contemporary style, cast aluminum leg. Comes with a removable plate for easier installation.

• A contemporary style, cast aluminum leg.

• A contemporary style, cast aluminum leg. Comes with a removable plate for easier installation.

Square Plate & Bolt for Metal Legs

5099

• Price Breaks: Each / 25 / 100 • Unit of measure: Each • Can be used to replace the plate that comes with two of the previous metal legs #5086 and #5091.

234

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


2½” 3-Corner Leg (Unfinished) 5272

2½” 3-Corner Leg (Walnut Finish) 5271

LEG

Legs

TR

Triangle Shape

2½” 3-Corner Leg (Natural Finish) 5270olorer cilisi

2” 3-Corner Leg (Walnut Finish) 5273

• Price Breaks: Each / 10 / 80

• Price Breaks: Each / 10 / 80

• Price Breaks: Each / 10 / 80

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

• Screw-in mounting.

• Screw-in mounting.

• Screw-in mounting.

2” Blackball Stem Brass

• Price Breaks: Each / 10 / 160 • Unit of measure: Each • Screw-in mounting.

LEG

Legs

CA

Castors

3031

• Price Breaks: Each / 24 / 120 • Unit of measure: Each • Castor sleeve included.

Visit www.jennisfabrics.com

235


LEG

Legs

CA

Castors

2” Blackball Plate Brass 3041

2” Blackball Plate Chrome 3042

2” Blackball Plate Antique Gold 3043er cilisi

• Price Breaks: Each / 24 / 120 • Unit of measure: Each • Note: Plate castors do not include mounting screws (see page 130 for #8 Wood Screws).

2” Twin Wheel Office Castor Chrome 3044

236

2” Office Ball Castor Chrome 3053

2½” Slimline Stem Brass 3063lisi

2½” Slimline Plate Brass 3065

• Price Breaks: Each / 24 / 100

• Price Breaks: Each / 24 / 120

• Price Breaks: Each / 24 / 100

• Price Breaks: Each / 24 / 100

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

• Plate castors do not incude mounting screws. Twin wheel recommended for carpet

• Ball castors recommended for hard surfaces. Friction ring mounting.

• Popular Slimline style castor metal ball in bright brass finish. Castor stems included.

• Popular Slimline style castor metal ball in bright brass finish.

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


¼” Barbed T-Nut

LEG

Legs

TN

T-Nuts

5231

• Price Breaks: Package / 10 / 50 • Unit of measure: Package of 100

/16” Barbed T-Nut

5

5233

• Price Breaks: Package / 10 / 25 • Unit of measure: Package of 100

Barbed T-Nuts Barbed T-nuts can be used with bolt style legs or threaded bolt castors. Can be used with hanger bolt #5235. To attach, drill a hole for the bolt to recess into. Hammer the T-nut into the hole. The barbs lock the nut into the wood and the leg can easily be removed and reinstalled later. Made from 1050 steel, accepts ¼ coarse thread bolts and screws.

Hanger Bolts 3½” x 5/16”

LEG

Legs

HA

Hanger

5235

• Price Breaks: Package / 4 / 20 • Unit of measure: Package of 25 • Wood to metal hanger bolts. The wood screw end mounts into the leg and the threaded machine screw end fits into any 5/16” (0.79 cm) nut or T-nut.

Visit www.jennisfabrics.com

237


LEG

Legs

GL

Glides ¾” Square Base Straight Glide 5065

¾” Square Base Angle Glide 5066

/8” Square Base Straight Glide 5067si

/8” Square Base Angle Glide 5068

• Price Breaks: Package / 20 / 100

• Price Breaks: Package / 20 / 100

• Price Breaks: Package / 20 / 100

• Price Breaks: Package / 20 / 100

• Unit of measure: Package of 50

• Unit of measure: Package of 50

• Unit of measure: Package of 50

• Unit of measure: Package of 50

• ¾” (1.9 cm) square glides fit into square chair leg tubing.

• ⅞” (2.23 cm) square glides fit into square chair leg tubing.

• ⅞” (2.23 cm) square glides fit into square chair leg tubing.

• ¾” (1.9 cm) square glides fit into square chair leg tubing. Standard polyethylene.

/8” Rubber Insulated Glide 5051

/8” Plastitack Glide 5063

7

5

¾” Single Prong Glide 5073r cilisi

• Price Breaks: Package / 20

• Price Breaks: Package /10 / 20

• Price Breaks: Package / 5 / 10

• Unit of measure: Package of 50

• Unit of measure: Package of 50

• Unit of measure: Package of 200

• Made from PVC in a natural linear flat bottom style. Protects wooden leg and floor.

• Single prong furniture glides constructed in heavy nickel plated steel.

• Nickel plated rubber insulated glide, case hardened steel with thick rubber cushion to muffle noise.

238

7

7

/16” x 1¼” Round Glide Black 5050

7

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS

• Price Breaks: Package / 10 / 20 • Unit of measure: Package of 100 • Black plastic glide


30” Enbond Decking 4159

36” Enbond Decking 4161

LIN

Linings

EN

Enbond

42” Enbond Decking 4163lorer cilisi

60” Enbond Decking 4167

• Price Breaks: Yard / 550 / 1000 • Unit of measure: Yard • 100% Grey spun bonded polypropylene

100% Spun Bonded Polypropylene Enbond Decking Enbond is an economical 100% spun bonded polypropylene non-woven fabric with high strength, excellent softness, and high rot and mildew resistance. It is antiseptic and has excellent chemical resistance. It is also heat processable, receptive to dyes, non raveling, and has low face pilling. Weight is 1.6 oz./square yard (49.63 g/square meter), the goods are 0.3 mm in thickness. Tear strength is 5lbs. x 5lbs. (2.27 x 2.27 kg), and the tensile strength is 13lbs. x 9lbs. (5.89 x 4.08 kg). Use for all your furniture and bedding, industry covers, quilt backings and decking applications.

30” Black Typar 1.6 oz.

4180

LIN

Linings

TY

Typar

36” Grey Typar 1.6 oz. 4179

• Price Breaks: Yard / 270 / 1000 • Unit of measure: Linear yard • Typar non-woven decking by DuPont. • A new product of spun bonded polypropylene with many applications in traditional dust cover and furniture construction. Due to its polypropylene construction, it is impervious to moisture and so resists rotting and mildew, with good breathability. Because of its continuous filament spun bonded construction, Typar is non-raveling, with a high tensile strength and break elongation of 45-60%, providing excellent energy absorption and toughness. Typar can be glued, stapled and sewn (recommended maximum stitch density of 5-7 per inch (2.5 cm). Available in 2 styles.

Visit www.jennisfabrics.com

239


LIN

Linings

DK

Decking

30” Nuface “B” Decking 4109

36” Nuface “B” Decking 4110

42” Nuface “B” Decking 4112rer cilisi

• Price Breaks: Yard / 273 / 1000

#4112: Yard / 270 / 1000

• Unit of measure: Linear yard • Nuface decking is a grey woven polypropylene with a 100% nylon face. Will not rot or break down. Suitable for pulls, quilt backing, dust cloth, decking, etc. Semi-transparent, easily stitched. Somewhat firm hand makes it easy to work with and sew.

30” Embossed Decking Black

4142

30” Embossed Decking Beige

4145

• Price Breaks: Yard / 25 / 137 • Unit of measure: Linear yard • Cushion sliding a problem? Embossed decking by Rodon. 100% woven polypropylene in a 30” (76.2 cm) width. Has a napped embossed anti-slip finish that makes it ideal for leather (or other slippery) fabrics. The cushions will stay put much better than with smooth decking finishes. Available in cut length, in black or beige.

LIN

Linings

BU

Burlap 40” Burlap 10 oz.

2219 • Price Breaks: Yard / 100 / Bale (≈ 1900 yards) • Unit of measure: Yard • 10 oz. (283.5 g) Burlap in a 40” (101.6 cm) width. Available in cut length or by the piece, which varies in size from 80-120 yards (72.2 m - 109.7 m), or in a bale of 1900 yards (1736.6 m).

240

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


LIN

Linings

SK

Skirt

Skirt Linings • Price Breaks: Roll (see below) / 500 • Unit of measure: Yard • Roll sizes: #7119: 83 yards, #7135: 62 yards, #7139: 28 yards, #7149: 150 yards, #7159: 209 yards. • Priced by the yard. Sold in full rolls only. Roll lengths vary.

6” Sew On 6” Heavy Sew On 7” Heavy Sew On

7119 7135 7139

6” Iron On 7” Iron On

7149 7159

Skirt Linings Skirt lining or backing, (also known as Pelon), in 3 styles in the customary 6” (15.3 cm) or 7” (17.8 cm) width. The heavy lining has a firmer hand and imparts a greater stiffness and form to the skirt. The iron on lining has an adhesive imbedded into the fabric that is heat activated. Used to maintain shape and give a finished backing to skirts. Also can be used to reinforce material or vinyls if too thin, for proper stitching or use in button molds, etc. Uniroyal recommends lining the seamed areas of all Naugahyde® vinyls for stronger, more tear resistant seams.

27” Quilted Decking

LIN

Linings

QU

Quilted

4139

• Price Breaks: Yard / 50 / 200 • Unit of measure: Yard • Dark brown taffeta (a 70 Denier brown nylon lining) quilted to ⅛” (3 mm) foam with a scrim backing. Available in 27” (68.6 cm) width, by the linear yard.

Visit www.jennisfabrics.com

241


NEE

Needles

CU

Curved

Needles There are two basic classes of needles; the round point and the bayonet point. The bayonet (or cutting) point is recommended for heavier materials that are not prone to splitting, such as leathers and other heavy fabrics. It passes through the material easier, causing less fatigue in hand sewing. Where cutting of the goods is a concern, round point needles are recommended. Also used for joining leather and fabric together. The points and eye ends of these needles are shown here.

Round Points

F1 Assorted Needle Kit

Bayonet Points

6201 • Price Breaks: Each / 10 • Unit of measure: Each • The F1 needle kit consists of 4 common sizes of curved round needle points. 1 each of: 3” (7.6 cm) 18 gge 4” (10.2 cm) 17 gge 5” (12.7 cm) 16 gge 6” (15.2 cm) 15 gge

2½” Curved Round Point Needle 6204

3” Curved Round Point Needle 6205

4” Curved Round Point Needle 6207er cilisi

5” Curved Round Point Needle 6208

• Price Breaks: Each / 12 • Unit of measure: Each • Curved needle for blind stitching in common sizes. These needles have sharpened round points and will not cut vinyls like bayonet (3 square) points sometimes do.

242

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


2½” Curved Bayonet Point Needle 6214

3” Curved Bayonet Point Needle 6215

NEE

Needles

CU

Curved

4” Curved Bayonet Point Needle 6217orer cilisi

5” Curved Bayonet Point Needle 6218

• Price Breaks: Each / 12 • Unit of measure: Each • 3 square point needles for use in heavier cloths. Piece leather and other heavy goods more readily than round points, resulting in less hand fatigue. • Tip: If material being sewn is hard to work with, wax the needle with a bit of Beeswax.

9” Plastic Handle Regulator

6601

NEE

Needles

RE

Regulators

10” All Steel Regulator 6606

• Price Breaks: Each / 12 • Unit of measure: Each • Regulators are used for adjusting stuffing behind covers; one end is a sharp round point and the other is either padded or flattened to ease the strain on the hand.

Visit www.jennisfabrics.com

243


NEE

Needles

ST

Straight Single Straight Round Point Needle

• Price Breaks: Each / 12 • Unit of measure: Each • Long round point needles with single pointed end, large eye on the other end.

6223 6225 6226

8” (20.3 cm) 10” (25.4 cm) 12” (30.5 cm)

Double Straight Round Point Needle

16” (40.6 cm) 18” (45.7 cm)

6227 6228

• Price Breaks: Each / 12 • Unit of measure: Each • Double pointed needles have sharp round points on both ends and a large eye at one end.

6233 6234 6235 6236

10” (25.4 cm) 12” (30.5 cm) 16” (40.6 cm) 18” (45.7 cm)

Double Straight Bayonet Point Needle

• Price Breaks: Each / 12 • Unit of measure: Each • Double needles as above but with the 3 square point end for heavy materials. Pointed both ends with a single eye.

12” (30.5 cm) 16” (40.6 cm) 18” (45.7 cm)

244

6245 6246 6247

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


NEE

Needles

TU

Tufting

Tufting Tufting, a popular style, is a difficult job. With the tool shown below, tufting becomes an easier, faster job requiring less training of staff. No more turning of the material to be tufted. It can all be done from above. You will have a straight seam with less stitching and tearing. Repairs and replacement of buttons in upholstered furniture no longer requires removal of the cover. Specially made clips are set into the needle near the point and after inserting, the clips is then ejected by the spring loaded handle and the button is set firmly in place. Needles and clips are sold separately.

Tufting Needle

6261

• Price Breaks: Each • Unit of measure: Each • Specially made clips are used with the Tufting Needle. They set into the needle near the point, and after inserting, the clip is ejected by the spring loaded handle, and the button is set firmly in place. Clip sold seperately #6262.

Clips Only for Tufting Needle 6262 • Price Breaks: Package / 5 / 10 • Unit of measure: Package of 100 • Clips only for Tufting Needle. Tufting needle sold seperately.

Visit www.jennisfabrics.com

245


PAD

Paddings

Notes

Padding Notes For additional padding materials, see the Foam section starting on page 198. Terylene is also known as Kodel, Dacron, Poly wrap or Polyester, Cushion Wrap, Holofil, Fiberfill and many others. While there are some differences between these products, they are all used for similar purposes in upholstery padding. They are used to give a noncompressing wrap/finish to cut foam shapes or any uneven areas. This product is not prone to crushing and is easily manipulated to fill in the imperfections in cushion once the fill is inserted. This product is also very sanitary. Unlike some of the old horsehair products that are occasionally found in antique furniture, there is nothing in it to support molds, mildews or any kind of parasitic life. Terylenes will retain their given shape better over time than down fill or some of the lower density foams. The product is normally shipped vacuum packed to save on shipping costs. Due to its excellent resilience, it is ready to use as soon as you unwrap it. It needs no time for expansion. Bond Terylene: Has some adhesive in its make-up which provides stiffness and consistency to the product. This product will split easily and stay in the shape it assumes after splitting, making it ideal as a cushion wrap. Unbonded Terylene: Useful as a loose fill product, it is made without the adhesive found in bonded terylene. Unbonded is ideal for filling soft cushion backs, small pillows and cushions. Quilted Terylene: Soft, unbonded terylene stitched in a 6” (15.2 cm) channel with a scrim backing on both sides. Keeps its shape after being cut and saves time. Dacron Holofil: Light, premium, unbonded polyester for use in cushions as a loose fill product. It is lightweight, sanitary and has excellent resilience characteristics. It is recommended for sofa back cushions and throw cushions. All of these products provide some insulating properties as they provide an air cushion. However, if insulating is your primary goal, we recommend the 3M Thinsulate™ line of padding. Terylene products are separated by distribution centers: West (BC, Alberta, Saskatchewan): Edmonton Distribution Centre East (Manitoba, Ontario, Atlantic Canada, Quebec): Toronto Distribution Centre

PAD

Padding West

TE

Terylene 27” Terylene

54” Terylene

8239

8249

60” Terylene (Edmonton Only) 8253 cilisi

• Price Breaks: Roll / 50lbs. • Unit of measure: Pound • Resilient, consistent and sanitary cushion wrap padding • Non woven resin bonded terylene has a slightly stiff feel and finish. Can be split through its thickness to give a thinner material for use as a cushion wrap. A 27” (68.6 cm) roll weighs ≈ 13lbs. (5.9 kg), 54” (137.2 cm) roll weighs ≈ 25lbs. (11.3 kg) and 60” (152.4 cm) roll weighs ≈ 28lbs. (12.7 kg). Each roll is about 25 yards (22.9 m). Only Edmonton carries #8253. • Note: Priced by the pound, sold in full rolls only.

246

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


30” Unbonded Terylene

PAD

Padding West

TE

Terylene

8250

• Price Breaks: Roll / 50lbs. • Unit of measure: Pound • Unbonded terylene is useful as a loose fill product. Without the adhesive it is softer and gives an excellent feel and resilience. It can be considered as a replacement for down in many applications and is much more consistent and sanitary than any animal derived fibers. Sold in 30” (76.2 cm) wide rolls of approximately 10lbs. (4.5 kg). • Note: Priced by the pound, sold by the roll.

30” Dacron Holofil

8255

• Price Breaks: Roll / 50lbs. • Unit of measure: Pound • Dacron Holofil is a light, premium unbonded polyester for use in cushions as a loose fill product. It is lightweight, sanitary and has excellent resilience characteristics. It is recommended for sofa back cushions and throw cushions. It is available in rolls of approximately 10lbs. (4.5 kg) • Note: Priced by the pound, sold by the roll.

56” Quilted Terylene

8279

• Price Breaks: Roll / 50lbs. • Unit of measure: Pound • Quilted terylene in soft, unbonded terylene stitched in a 6” (15.2 cm) channel with a scrim backing on both sides. Because of its backing it keeps its shape after being cut. Available only in 56” (142.2 cm) wide rolls approximately 22lbs. (10 kg). • Note: Priced by the pound, sold by the roll.

Visit www.jennisfabrics.com

247


PAD

Paddings East

TE

Terylene 27” Terylene

54” Terylene

8243

8242

27” Terylene Uncompressed 8240rer cilisi

• Price Breaks: Roll / 50lbs. • Unit of measure: Pound • Resilient, consistent and sanitary cushion wrap padding • Non woven resin bonded terylene has a slightly stiff feel and finish. Can be split through its thickness to give a thinner material for use as a cushion wrap. A 27” (68.6 cm) roll weighs ≈ 15lbs. (6.8 kg) and 54” (137.2 cm) roll weighs ≈ 30lbs. (13.6 kg). Each roll is about 25 yards (22.9 m). • Note: Priced by the pound, sold in full rolls only.

30” Unbonded Terylene

8251 • Price Breaks: Roll / 50lbs. • Unit of measure: Pound • Unbonded terylene is useful as a loose fill product. Without the adhesive it is softer and gives an excellent feel and resilience. It can be considered as a replacement for down in many applications and is much more consistent and sanitary than any animal derived fibers. Sold in 30” (76.2 cm) wide rolls of approximately 20lbs. (9.1 kg). • Note: Priced by the pound, sold by the roll.

30” Dacron Holofil

8257 • Price Breaks: Roll / 50lbs. • Unit of measure: Pound • Dacron Holofil is a light, premium unbonded polyester for use in cushions as a loose fill product. It is lightweight, sanitary and has excellent resilience characteristics. It is recommended for sofa back cushions and throw cushions. It is available in rolls of approximately 20lbs. (9.1 kg) • Note: Priced by the pound, sold by the roll.

248

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


4” x 22” x 28” Cushion Fiber 8261 • Price Breaks: Each / 4

4” x 22” x 48” Cushion Fiber 8265

PAD

Padding

FI

Fiber

PAD

Padding

JA

Jay Flex

4” x 22” x 78” Cushion Fiber 8267orer cilisi

#8261: Each / 8

• Unit of measure: Each • Specialized fiber for outdoor cushions, prevents moisture from being caught within the cushion, maintaining cushion quality. Available at all distribution centres.

27” Jay Flex Padding White 5169 • Price Breaks: #5169: Each / 5

60” Jay Flex Padding White 5179

#5179: Each

• Unit of measure: 27.3 yard/25 m roll • Jay Flex is a white padding material that is approximately 0.15” (0.38 cm) thick. It is used as a replacement for Maxolite. It is a 100% polyester needle punched foam. The fiber provides strength and resiliency while the foam provides stability and memory. Although thin, its superior inherent properties allow it to replace much heavier materials in padding frames and forms. It is excellent for use on rounded arms, frame fronts, etc. It provides a beautiful, smooth, consistent padding.

Visit www.jennisfabrics.com

249


PAD

Paddings

TH

Thinsulate™

UDS 100 Thinsulate™ 60” 11091

UDS 150 Thinsulate™ 60” 11093

UDS 200 Thinsulate™ 60” 11095rer cilisi

• Price Breaks: Each / 25 / Roll (see below) • Unit of measure: Yard • Roll sizes: #11091: 100 yards, #11093: 70 yards, #11095: 50 yards

UDS Thinsulate™ Type U Ultra Thinsulate™ thermal insulation offers a mid-loft alternative within the Thinsulate™ family of products. Type U is designed for use where a thin compressible insulation is important. It is breathable, moisture resistant and can be washed or dry cleaned. It can be used in general outerwear, sportswear, gloves and accessories. It is composed of 55% polyester and 45% polyolefin and has a double sided scrim backing, pre-quilted in 6” (15.2 cm) width, which will allow it to be free hung or edge stabilized. There are no panel size restrictions. It is recommend that you check before using this weight with light color shell fabrics to determine if the quilting lines will show through. This product maintains its insulating ability when damp. The fibers will absorb less than 1% of their weight in moisture. It is easily dried. It passes Flammability Class 1 as tested according to procedure described in 16 CFR Part #1610, Federal Flammable Fabrics Act. Product

Thickness

Weight

Insulation

USD 100 USD 150 USD 200

0.4” (1.1 cm) 0.6” (1.6 cm) 0.8” (2.1 cm)

3.18 oz./yd. (105 g/m ) 4.60 oz./yd2 (157 g/m2) 6.20 oz./yd2 (210 g/m2) 2

2

Intrinsic Clo (1c)

R-value

1.50 2.27 3.00

1.30 2.00 2.64

Intrinsic Clo is a formula that measures calorie loss, the R-value is measured in BTUs. The numbers are best used for comparison purposes. By comparison a T-shirt is about 0.09 Clo.

UDS 100 0.4” (1.1 cm)

UDS 150 0.6” (1.6 cm)

UDS 200 0.8” (2.1 cm)

The weight does not include the weight of the scrim which is 1.4 oz./yd2 (46 g/m2). Note: Thinsulate™ insulation is made within strict dimensional tolerances. It is however possible for the rolls to shift, shrink or otherwise change dimensions to a maximum of ±4% during shipping or handling.

250

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


27” Felt Padding - Vancouver 4337

27” Felt Padding - West 4339

PAD

Padding

FE

Felt

27” Felt Padding - East 4340rer cilisi

• Price Breaks: Bale / 125 • Unit of measure: Pound • Felt or cotton has been the industry mainstay for years and continues to enjoy enormous popularity as a matting type of padding. Available in 27” (68.6 cm) wide bales of about 30lbs. (13.6 kg). This bale rolls out to about 25 yards (22.9 m). It is excellent as a cover over springy and resilient fiber padding, such as horsehair or cortex because it will prevent the fibers from working through the cover. • Note: Priced by the pound, sold by the bale.

UF8 Felt Bales

4335

• Price Breaks: Bale • Unit of measure: Pound • UF8 is a very clean felt made of a polyester cotton blend. Passes UFAC fire retardant requirements. Bale approximately 28lbs. (12.7 kg).

Visit www.jennisfabrics.com

251


PAD

Paddings

DE

Deck ¼” 24” x 150’ Deck Pad

4100

¼” x 27” x 150’ Deck Pad 4105

• Price Breaks: Each / 5 • Unit of measure: Roll • Economical deck padding composed of industrial synthetic and natural waste fibers bonded together with an adhesive to form a strong padding that will resist breaking down. Can also be used as a carpet underpad. This same product in a pressed form without the adhesive is available for 20 oz. (567 g), 27 oz. (765 g) and 40 oz. (1134 g) weight for carpet underlay under our industrial fabrics.

Padding/Stuffing Tips When trying to get padding into a channel or existing cover, you will often find that as you force the stuffing into the cover, it tears and you lose the smooth, even finish you wanted. Tip 1: Use silicone spray liberally on the stuffing; it will evaporate without leaving a trace or stain. Tip 2: Run a strip of 2” (5 cm) or wider tape along the stuffing, on the side that will be away from the cover, to prevent the stuffing from ripping. This method is especially useful with felt padding.

TOO

Tools

PI

Piping Tins 4” Piping Tins

6415 • Price Breaks: Pair • Unit of measure: Pair • Piping tins are used to achieve consistent, even fluting in sofa backs and other locations on furniture. Provided in pairs. Insert into the channel, stuff and remove, leaving behind and evenly stuffed, clean and well padded channel. All metal construction. Available in 4” (10.2 cm), 35” (88.9 cm) long.

252

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


PAD

Padding

CI

Comforter Inserts

Down Comforters Ounce for ounce, down is the most efficient insulator known to man. Synthetic and other natural fibers can match its insulation levels, but not at the same light weight. It is warm, light and easy to care for, making down the ultimate choice for comforters and bed coverings. Down is not the same as feathers. Feathers have hard tubular quill structures, which do not exist in down. Down is found in small clusters on the underbody of waterfowl such as geese, ducks and swans. Due to down’s ability to loft, each cluster traps more dead air for its weight than any synthetic. It can be compressed, and all that is required to return it to its original shape and loft is a good shake. Down has the ability to mold itself to the body, while synthetics tend to be more rigid. It also breathes so you won’t feel clammy. Down is versatile enough to be used year round in most cases. It is an insulator, not a heater, allowing air to flow rather than sealing it in, adjusting to the temperature of the body. It can be compressed into small spaces. Down clusters are incredibly resilient, with proper care, a down product will last a lifetime. Be sure that the cover has a high thread count and cotton content. Easy to use, easy to care for and the ultimate in luxury. Genuine down is in a class of its own. We are pleased to offer the following premium down comforter inserts.

Down Comforter Double 84” x 90” 6901

Down Comforter Queen 90” x 95” 6902

Down Comforter King 108” x 95” 6903er cilisi

• Price Breaks: Each • Unit of measure: Each • Down’s light weight matched with breathability and durability make it ideal for comforter and duvet inserts. Down comforter weights differ between sizes: Double 27 oz. (765 g), Queen 30 oz. (851 g), King 37 oz. (1049 g). These comforters are made with White Canadian Down, contained in a square envelope of baffled construction with a 260 thread count, 100% white cotton. This high thread count ensures that none of the down will migrate out of the comforter. These are premium comforters that can be covered with any fabric. Fill power 652 - 675.

Goose Down Double 84” x 90” 13010

Goose Down Queen 90” x 95” 13011

Goose Down King 108” x 90” 13012rer cilisi

• Price Breaks: Each • Unit of measure: Each • The goose down comforter is a higher quality comforter than a duck down comforter. The goose down is much lighter and incredibly warmer than duck down. 100% cotton casing (260 thread count) with baffle box construction for even warmth.

Visit www.jennisfabrics.com

253


PAD

Paddings

PI

Pillow Inserts

Create Pillows & Bolsters to Match your Comforter Covers These high quality feather pillow inserts are filled with white waterfowl feather for an excellent feel with a higher degree of firmness that you would find in pure down. The minimum thread count on the cover envelope is 200, which will ensure that the feather will not migrate out of the pillow. All products are sanitized and guaranteed against normal defect. You can create a comforter and pillows to match decorative window treatments or upholstered pieces with our extensive line of fabrics and these inserts.

Feather Pillow Double 23” x 18” 6910

Feather Pillow Queen 28” x 18” 6911

Feather Pillow King 35” x 18” 6912rer cilisi

• Price Breaks: Each • Unit of measure: Each • Feather pillow insert to accompany the previous down comforter inserts. Weights are: Double - 32 oz. (907 g), Queen - 38 oz. (1077 g), King - 44 oz. (1247 g). This product comes in an envelope of 100% white cotton with a 200 thread count. Fill is 100% white waterfowl.

Wrapped in Down Double 26” x 20” 13004

Wrapped in Down Queen 30” x 20” 13005

Wrapped in Down King 36” x 20” 13006ilisi

• Price Breaks: Each • Unit of measure: Each • 90% feather middle, 10% down around. 260 thread count of 100% cotton casing.

254

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


PAD

Padding

CU

Cushion Inserts

Feather Throw Cushion Inserts • Price Breaks: Each • Unit of measure: Each • Throw cushion inserts of 100% white waterfowl feathers in an envelope of white down proof cotton, with a thread count of 260.

12” x 20” 16” x 16” 18” x 18” 20” x 20”

13014 13013 6915 6916

Polyester Toss Cushion Form

6917 13015 13016

25” x 25” 27” x 27” 32” x 32”

• Price Breaks: Each / Case (see below) • Unit of measure: Each • Cases: #6924: 25, #6925: 12, #6926: 12, #6927: 12, #6928: 8

14” x 14” 16” x 16” 18” x 18”

6924 6925 6926

6927 6928

20” x 20” 24” x 24”

6929 Polyester Pillow Form Queen

Polyester Pillow Form King 6930

• Price Breaks: Each / 5 • Unit of measure: Each • Queen 18” x 26”(45.7 x 66.0 cm), King 18” x 32” (45.7 x 81.3 cm) • Excellent feel with a higher degree of firmness than feathers or down. Sanitary synthetic cushion forms in a polycotton envelope.

Visit www.jennisfabrics.com

255


PAD

Paddings

FB

Feather Bed Feather Bed Double 54” x 76” 13007

Feather Bed Queen 60” x 80” 13009

Feather Bed King 80” x 80” 13008r cilisi

• Price Breaks: Each • Unit of measure: Each • 90% feather, 10% down • 260 thread count of 100% cotton casing. • Hermetic square

PAD

Paddings

BO

Bolster

Bolster 7” x 14”

6921

Bolster 9” x 39”

6920

• Price Breaks: Each • Unit of measure: Each • 100% polyester silicone bonded Holofil fiber bolster inserts to form cushions and bolsters for furniture and bed, with a covering envelope of 200 thread count polycotton.

256

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


28” x 40” 40 gge Cardboard 3219

40” x 60” 60 gge Cardboard 3229

• Price Breaks: Sheet / 15 / 100

PAT

Pattern Making

CA

Cardboard

PAT

Pattern Making

PE

Pens

40” x 60” 100 gge Cardboard Black 3249er cilisi

#3249: Sheet / 15

• Unit of measure: Sheet • Sturdy cardboard sheeting in 3 thicknesses: 40, 60, and 100 gauge. This material can be used for making patterns, or laminated together to make panels, stiffeners, etc. Often used as door panels in automotive and van customizing. The first two sizes are a standard brown color, the last one has a matte black finish.

Wash-Out Marker White

3004

• Price Breaks: Package / 12 • Unit of measure: Package of 12 • Easily sharpened markers for intricate designs. Leaves a clean white mark. Designed to washout from most fabrics with water. Great on Sunbrella®.

Visit www.jennisfabrics.com

257


PAT

Pattern Making

CH

Chalk

Sanigene® White Chalk

3001

Sanigene® Yellow Chalk 3003

• Price Breaks: Box / 6 • Unit of measure: Box of 144 • Dustless Sanigene® #1406 blackboard chalk; useful and removable on many surfaces.

Tailors Chalk White 3005

Tailors Chalk Yellow 3007

Tailors Chalk Black 3008orer cilisi

• Price Breaks: Box / 5 • Unit of measure: Box of 48 • Tailors style crayon chalk: can be easily resharpened and is non-permanent on most surfaces. Unlike some inks, the wax base will not bleed through surfaces. The white chalk can be removed from dark surfaces with the quick touch of an iron or steamer.

258

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


Plastic Head Pins Red 6257

Plastic Head Pins Blue 6258

PAT

Pattern Making

PI

Pins

Platic Head Pins Yellow 6259er cilisi

• Price Breaks: Box / 5 • Unit of measure: Box of 100 • 2⅛” (5.4 cm) long pins with bright plastic heads for holding covers in place for fitting. The bright heads make them easy to see and remove.

3” Skewers

6255

• Price Breaks: Box / 4 • Unit of measure: Box of 36 • 3” (7.6 cm) 16 gge all steel skewers with a large eye end for gripping and threading. Used for pinning covers while fitting.

Knobby Twist Pin Crystal

6251

• Price Breaks: Box • Unit of measure: Box of 500 • This curling pin with plastic “crystal” head is ideal for holding doilies and arm covers in place.

Visit www.jennisfabrics.com

259


PAT

Pattern Making

RU

Rulers

1½” Wide 60” Ruler

6608

2” Wide 60” Ruler

6609

• Price Breaks: Each • Unit of measure: Each • These aluminum rulers are light and versatile; double as a measuring stick and a straight edge. The numbers are printed on, not stamped into the ruler, giving a smooth non-snagging surface when used as a straightedge. Two widths, 60” (1.5 m) length.

260

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


SHE

Shears

ST

Straight

Mundial Stay-Set™ Shears - The Cutting Edge Mundial is a world renowed quality shear, manufactured to the highest standards using only the best materials and processes. Adjust the ride once with a screw driver and you are done. The Stay-Set™ is uniquely engineered to stay true to its name. Once set, it stays set for comfortable cutting power under the most demanding commerical conditions. Hot drop forged and fully nickel plated with black enamel handles.

Mundial 10” Shear Right Hand 7004

Mundial 10” Shear Left Hand 7005

• Price Breaks: Each / 6 • Unit of measure: Each • Common size found in general upholstery: solid feel, sturdy blade and good length. This 10” (25.4 cm) shear is available for left and right hand use.

Mundial 8” Shear

Mundial 9” Shear

Mundial 12” Shear

Cushion Soft 9” Shear

7002

7003

7007er cilisi

7001

• Price Breaks: Each / 6

• Price Breaks: Each / 4

• Price Breaks: Each / 6

• Price Breaks: Each / 6

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

• Smaller shears for smaller hands and tighter quarters.

• Premium quality 9” (22.9 cm) shears.

• Right hand use.

• Right hand use.

• The same high quality shear with longer 12” (30.5 cm) blade length

• Shear with enlarged finger bows and padded soft touch lining, ergonomically designed for left and right hand use.

Visit www.jennisfabrics.com

261


SHE

Shears

ST

Straight Mundial 10” Heavy Duty Shear 7013

Mundial 12” Heavy Duty Shear 7014

• Price Breaks: Each / 6 • Unit of measure: Each • Heavier versions of the 10” (25.4 cm) and 12” (30.5 cm) shears. Thicker, heavy duty blades cut through multiple layers and tough materials. Extra weight gives extra control and smoothness when cutting. Both sizes are for right hand use.

Wiss 9” Apparel Shears 7020

Wiss #22N 12” Bent Trimmer 7026

Wiss #20 10” Bent Trimmer 7025r cilisi

Wiss #20LH 10” Left Hand Bent Trimmer 7027

• Price Breaks: Each

• Price Breaks: Each

• Price Breaks: Each

• Price Breaks: Each

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

• Bent apparel sheers with “inlaid” blades and black handles for professional dress maker and industrial use.

• Industrial sheers with “inlaid” blades, black handles.

• Industrial sheers with “inlaid” blades, black handles.

• Industrial sheers with “inlaid” blades, black handles.

• Right hand use.

• Right hand use.

• Left hand use.

Wiss 10” Heavy Duty Bent Trimmer 7030

Wiss 12” Heavy Duty Bent Trimmer 7031

• Price Breaks: Each • Unit of measure: Each • Heavy duty bent shears with “inlaid” blades and black handles. Thicker, heavy duty blades for cutting through multiple layers and tough material.

262

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


Wiss 10” X-Sharp Knife Bent Trimmer 7032

SHE

Shears

ST

Straight

Wiss 12” X-Sharp Knife Bent Trimmer 7033

• Price Breaks: Each • Unit of measure: Each • All the quality of Wiss in a shear with a feature Knife Edge ground blade for faster, cleaner easier cutting of synthetic fibers. Fine cutlery grade steel, with Hot drop-forged polished blades and the patented Set-Easy pivot.

Wiss Shears Wiss Shears are made of the finest quality cutlery steel with drop-forged polished blades with a patented Set-Easy pivot. This superior combination of hardened, ground, edged and adjusted combines to provide outstanding cutting ability and durability… in the true Wiss tradition. Available in shears from 9” to 12” length and pinking shears in 9” & 10⅝” length. Also available are the Quickclip sharp point cutters that you can replace the blades rather that replace the whole cutter.

Mundial 9” Pinking Shear

SHE

Shears

PI

Pinking

7015

• Price Breaks: Each / 6 • Unit of measure: Each • A 9” (22.9 cm) blade with precision matched teeth provide a decorative, ravel resistant finish.

Visit www.jennisfabrics.com

263


SHE

Shears

PI

Pinking Wiss CB9 9” Pinking Shear

7016 • Price Breaks: Each • Unit of measure: Each • Precision matched teeth provide a decorative ravel resistant finish. Bearing pivot reduces friction and finger fatigue, which makes cutting easier.

Wiss 105/8” Large Teeth Pinking Shear 7017 • Price Breaks: Each • Unit of measure: Each • Industrial model for cutting light and heavy materials. Large teeth to give a larger cut “V”.

264

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


Quick Clip Cutter

SHE

Shears

QI

Quick Clip

7023

• Price Breaks: Each / 6 • Unit of measure: Each • A great tool for seamstresses or anyone working with loose threads or covers with many corners. Ideal for snipping threads: small and easy to use.

Wiss Quickclip Sharp Point Cutter 7021 • Price Breaks: Each • Unit of measure: Each • Heavy duty contour design with positive spring action re-opens blades for fast cutting. PVC plastic handle with stainless steel sharp point blades.

Wiss Quickclip Sharp Point Blades

7022

• Price Breaks: Each • Unit of measure: Each • Replacement blades. Set of blades and 4 blade screws.

Visit www.jennisfabrics.com

265


TOO

Tools

SH

Shears Shear Sharpener

7041 • Price Breaks: Each • Unit of measure: Each • Save time and money with this special vise and pivot arrangement for sharpening knife edge shears. No more lost time waiting for your shears to be returned from the sharpener; do them yourself. This unit must be firmly mounted onto a table or base. It is not designed to work free standing. The coarse stone in this unit is replaceable; it is the only shear sharpener you will ever need. • For instructions on how to use this shear sharpener, please see page 365.

Replacement Coarse Stone

7042 • Price Breaks: Each • Unit of measure: Each • For #7041 Shear Sharpener

266

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


SPR

Springs

CO

Coil

Coil Springs The hardness of a coil spring is determined by the wire gauge, temper and the shape of the spring. The thicker the gauge of wire, the harder the spring. Occasionally you will see three initials after the designation KOE (knotted one end), KBE (knotted both ends) or OBE (open both ends). We carry the knotted one end style, which is suitable for both seats and backs in the correct gauge. By varying the coil diameter over the length of the spring, it is possible to get differing spring rates depending on the load placed on the spring. For example, a spring can give way initially, and then progressively stiffen as the load increases and this will give a comfortable but firm seat. Coil spring tips: “Running In” is a method that can be used to shorten coil springs without cutting it and losing the large top loop that is used to tie the springs together. To do this, take the open unknotted end of the spring and tuck it under the next lower loop, then using a twisting and rocking motion, work the free end down the loops towards the knotted end, the back up. The spring will be lower than before, with no loss of temper or sharp cuts and still have the proper end shapes. A fast, secure and easy way to anchor the twine to the wood frame when tying springs is the two tack method shown below. Merely set two tacks into the frame, run a loop of twine between them, fold it back over and then set the tacks firmly.

8 gge x 8” Coil Spring

7529

• Price Breaks: Bundle (≈ 60lbs.) • Unit of measure: Per pound in bundles

9 gge x 5” Coil Spring 7559

9 gge x 6” Coil Spring

7569

• Price Breaks: Bundle (see below) • Unit of measure: Per pound in bundles • Bundles: #7559 ≈ 50lbs., #7569 ≈ 40lbs. • Knotted one end coil springs in 5” and 6” heights. Sold by the pound in bundles only.

Visit www.jennisfabrics.com

267


SPR

Springs

SI

Sinuous

Maximum resiliency is obtained when a convex spring arc height is between 2” (5.1 cm) and 2¼” (5.7 cm). This is the “rise” of the spring over the frame rail mounting point. If you wish to add an existing spring, use a hinge link at the back of the frame. Spring ends should be such so the both open ends face the same direction. Once cut, mount the springs with the open ends alternating left and right to get facing loops for joining with connecting links. There are a variety of clips available for mounting springs as well as edge wire, plus tools for shaping and stretching sinuous springs. Sinuous springs are available in continuous rolls or pre-cut into common frame size lengths. Mounting Clip Placement: Spring clips should always be mounted as shown, flush with the inside edge of the frame rails. If they are mounted forward or back of this position, then the downward movement of the spring will serve to lever the clip away from the wood. Clip too far back from the edge of the Clip mounted over the edge places frame allows the spring leverage on the clip. greater strain on the clip as spring flexes.

Correct placement of clip as shown below allows for movement of the spring without “levering” on clip as show in examples.

Spring Tension and Mounting Notes The following are the manufacturers recommendations for the use of sinuous springs: - For springs up to 24” (61 cm) in length, shorten the spring cut length by ½” (1.3 cm) compared to the distance between the inside edges of the clips. For springs 26” (66 cm) or greater in length, increase this dimension to ¾” (1.9 cm) to 1” (2.5 cm), depending on the type of “sit” that is desired. - Never use a spring that is longer than the length between the clips, otherwise “pocketing” will occur. - It is not recommended that you exceed spring lengths of 28” (71 cm) without the use of connecting links or bracing wires to spread the load to a great area.

Closed Helical Connecting Links Open Helical

268

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS

Supr-Loop Springs

Original No Sag (small) Loop Springs

Sinuous springs, also known as sagless or zig-zag, are the most common low profile springs in general upholstery. A solid and sturdy frame is required to bear the stresses, from the front to back rail and top to bottom rail pull of these springs (occasionally reinforcing is required).

XL Loop Springs

Sinuous Springs


8 gge No Sag Reel 7419

9 gge No Sag Reel 7429

11 gge No Sag Reel 7439orer cilisi

SPR

Springs

SI

Sinuous 12 gge No Sag Reel 7440

• Price Breaks: Roll / 5 • Unit of measure: 120 foot/36.5 m roll • High tensile strength tempered wire spring. No Sag has a slightly more open spring density than the regular XL Loop Springs. Available in 8 and 9 gge for use in seating, 11 and 12 gge for use as seat backs.

11 gge Supr-Loop Reel

7445

• Price Breaks: Roll / 5 • Unit of measure: 120 foot/36.5 m roll • High tensile strength tempered wire spring. This is the most open sinuous spring offered for a soft, flexible seat back. Available in 11 gge only for use in seat backs.

Springs No Sag Seat

No Sag

Supr-Loop

TO SCALE

Visit www.jennisfabrics.com

269


SPR

Springs

SI

Sinuous 8 gge x 24” No Sag Seat Spring 7469

8 gge x 25½” No Sag Seat Spring 7461

8 gge x 26” No Sag Seat Spring 7479rer cilisi

• Price Breaks: Each / Case (see below) • Unit of measure: Each • Case: #7469: 300, #7461: 200, #7479: 200 • High tensile strength wire springs in 8 gge seating stiffness, cut into 24” (61 cm), 25½” (64.8 cm) and 26” (66 cm) lengths and ready to use.

11 gge x 18” SuprLoop Spring 7489

11 gge x 20” SuprLoop Spring 7491

11 gge x 26” SuprLoop Spring 7497rer cilisi

11 gge x 27” SuprLoop Spring 7498

• Price Breaks: Each / Case (see below) • Unit of measure: Each • Case: #7489: 400, #7491: 300, #7497: 300, #7498: 300 • High tensile strength wire springs in 11 gge seating stiffness, cut into 18” (45.7 cm), 20” (50.8 cm), 26” (66 cm) and 27” (68.6 cm) lengths and ready to use. Recommended for seat backs.

8 gge x 26” No Sag Soft Edge Spring 7409 • Price Breaks: Each / Case (200) • Unit of measure: Each • Developed to serve the dual purpose of spring and spring edge in one piece. They are installed quickly and give uniform contour and feel across the installation. Available in 8 gge only for use in seating applications.

270

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


Pull Type Spring Stretcher

TOO

Tools

SI

Sinuous

7903

• Price Breaks: Each • Unit of measure: Each • Simple metal/wood tool allows a secure grip on the spring so it can be stretched into place in an existing clip. Useful for awkward spots where the lever type (below) will not fit. Contoured handle for comfort.

Pull Type Spring Stretcher

7904

• Price Breaks: Each • Unit of measure: Each • Wooden handled lever type stretcher speeds up the installation of sinuous springs, and is especially useful with heavy seating springs.

1” Spring Bender

7907

• Price Breaks: Each • Unit of measure: Each • Chrome plated sleeves are slotted to fit loops and can be used to alter bends precisely. Designed to allow exact manipulation of the angles of the arcs on the spring. High impact handles.

Visit www.jennisfabrics.com

271


TOO

Tools

SI

Sinuous Spring End Former

7905 • Price Breaks: Each • Unit of measure: Each • Lever action tool that can be used as a vice, but is best mounted to the edge of a workbench. Simplifies the crimping of spring ends (both coil and sinuous). A cleanly crimped spring end will not slide out of clips, and can provide a spot for hog rings or clips. Instructions and mounting bolts included.

For clips and pliers for sinuous springs, see page 277 - 278.

SPR

Springs

WI

Wire 8 gge x 12’ Edgewire

4209 • Price Breaks: Each / 25 / 50 • Unit of measure: 12 foot/3.7 m lengths • Edgewire is used for constructing, modifying or finishing metal and spring frames. This is tempered 8 gge spring wire in a 12’ (3.7 m) length, with common applications in automotive seating and many other spring and frame applications. Frequently used for hog ring bars (may be welded in place), or attached with clips to springs or other frame edges.

272

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


SPR

Springs

WI

Wire

16 gge Paper Covered Wire 4206 • Price Breaks: Each • Unit of measure: 3000’/912 m roll • Paper covered wire in bulk for production line use. Available in 16 gge for regular seating and frame applications. Paper wrap reduces friction and noise under frame flexing conditions.

16 gge Plastic Coat Wire

4210

• Price Breaks: Each • Unit of measure: 1000’/304 m roll • Plastic sheath on the wire provides lower friction and noise reduction. In addition, the plastic compresses when crimped, so clips and hog rings will not “slide” or come loose under flexing. Available in 16 gge for seating.

¾” Hog Rings

5143

• Price Breaks: Bag / 5 / 20 • Unit of measure: 5lbs./2.3 kg bag • ¾” (1.9 cm) low carbon steel rings as used in seat construction and the automotive industry. Sold in 5lbs. (2.3 kg) bags (approximately 2000 rings). See 278 for a full list of hog ring pliers and cutters.

Visit www.jennisfabrics.com

273


SPR

Springs

LI

Links Hinge Links

5121 • Price Breaks: Pound / 10 / 50 • Unit of measure: 5 lbs./2.3 kg bag • Wire link used to extend the arc of a sinuous spring; will allow up to a 2” (5 cm) rise depending on spring length. Snaps onto the spring, then slides into a spring clip. This unit should always be installed at the back of the frame. A pound is approximately 108 links (283/kg).

SPR

Springs

MI

Miscellaneous Torsion Springs

7413 • Price Breaks: Bundle / 20 • Unit of measure: Bundle of 20

11/16” (2.7 cm) ⅜” (0.9 cm)

• Torsion springs that resist compression are used to stiffen corners and edges of frames. Arms are approximately 3⅜” (8.6 cm), centered on a ⅞” (2.2 cm) spring loop, with a 11/16” (2.7 cm) arm for mounting into clips on the frame.

⅞” (2.2 cm) 3⅜” (8.6 cm)

274

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


EK No Sag Clips

SPR

Springs

CL

Clips

3023

• Price Breaks: Bag / 5 • Unit of measure: 5lbs./2.3 kg bag • Four hole clip allows a variety of nail combinations depending on the stress placed by either spring gauge or position. Approximately 770/bag.

3 Prong Clips

3021

• Price Breaks: Bag / 5 • Unit of measure: 5lbs./2.3 kg bag • 3 prong clip to secure edge wire to sinuous or coil springs. Best crimped with clip plier #8013. Approximately 505/bag.

BW Edgewire Clip

3022

• Price Breaks: Bag / 5 • Unit of measure: 5lbs./2.3 kg bag • Similar clip to 3 prong, but primarily used with sinuous springs. Works best on two straight surfaces. Clip plier #8026 eases installation. Approximately 640/bag.

Visit www.jennisfabrics.com

275


SPR

Springs

CL

Clips Rubber Webbing Clips

3028 • Price Breaks: Package / 10 • Unit of measure: Package of 100 • 2” (5 cm) clip for securing rubber or elastic webbings to a frame edge.

TOO

Tools

CU

Cutters #337 Wire Cutter

8014 • Price Breaks: Each • Unit of measure: Each • The fastest way to get rid of the original hog rings is to cut them off and remove the pieces. Wire cutters will cut through hog rings easily and is useful for all lighter gauges of wire. Versatile tool has non-slip handles and hardened cutting surface for long life.

276

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


#445 Pliers for 3 Prong Clips

TOO

Tools

SI

Sinuous

8013

• Price Breaks: Each • Unit of measure: Each • The pliers to use when crimping onto curved spring surfaces. Use these pliers and the 3 prong clips to get the best connection on curves and arcs. Special double pivot action ensure tight and complete crimping

#522 Pliers for BW Clips

8026

• Price Breaks: Each • Unit of measure: Each • Special round contact surface on the jaws of this plier ensure a good solid clamping of BW clips; recommended for joining edge wire to sinuous springs or other straight spring sections. If you are working with curves, the 3 prong clip and plier combination is best.

Visit www.jennisfabrics.com

277


TOO

Tools

HO

Hog Clips

#23 Straight Hog Ring Pliers 8005

#2360 Angle Hog Ring Pliers 8006

XX Straight Hog Ring Pliers 8002olorer cilisi

XXL Angle Hog Ring Pliers 8003

• Price Breaks: Each

• Price Breaks: Each

• Price Breaks: Each

• Price Breaks: Each

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

• Forged steel pliers with special jaws to hold and cleanly crimp hog rings.

• Same design as #8005 with spring loaded jaws, but with an angled head to allow blind clamping.

• For all hog rings up to 1½” (2.5 cm), case hardened with heavy nickel plating, and non-slip plastic handles.

• Similar to #2663, this heavy duty item has 4 mount holes.

L Right Angle Hog Ring Pliers

8004 • Price Breaks: Each • Unit of measure: Each • These pliers allow crimping in awkward spots with their angled nose. A strong elastic holds the hog ring securely while you position it, then a quick squeeze completes the task. Nickel plated case hardened steel for long life.

278

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


SPR

Springs

RE

Recliner Mechanism

3-Way Recliner Mechanism 7349 • Price Breaks: Pair / 6 • Unit of measure: Pair • The industry standard for smooth operating, durable 3 way low leg mechanisms, activated by pushing on the chair arms (non-levered operation). The 3 way mechanism features a break away back that opens to a full layout position. Solidly manufactured, using shoulder rivets at all key pivot points for durability. Finished in black.

2-Way Recliner Mechanism 7369 • Price Breaks: Pair / 6 • Unit of measure: Pair • Simpler two way mechanism is for use on chairs with a non-moveable back. Same sturdy construction, finished in black.

Visit www.jennisfabrics.com

279


SPR

Springs

UN

Units

Jackknife Hinge for Davenport 4037 • Price Breaks: Pair / 15 • Unit of measure: Pair • This hinge unit along with a simple frame will allow the quick construction of a Davenport seating unit. Complete Davenport spring units are also available, see below.

Drop In Chair Unit 22” x 22½” 7571

Drop In Loveseat Unit 22” x 45½” 7573

Drop In Sofa Unit 22” x 68” 7575r cilisi

• Price Breaks: Each / 10

#7571: Each / 15

• Unit of measure: Each • Advanced coil spring seating. • Ready to use drop in coil seat units in three sizes to fit most existing frames. Time tested coil spring design for the utmost in support and durability. Unitized flex-coil construction distributes the support evenly for uniform seating, 14 gge plasteel cross supports supply insulated attachment plus greater lateral stability, and the top grid provides a built in insulator for better support of the seat deck. Oil tempered spring wire is used throughout for a long life and gives a level, resilient deck.

280

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


SPR

Springs

HI

Hide-a-Beds

Hide-a-Beds There are two qualities of hide-a-beds available: a residential unit for in home use and a heavier contract unit for the hospitality industry where the unit would experience more frequent usage. The contract version has extra bracing and a slightly stronger hinge unit, as well as a non-tearing heavier tweed decking. Contract units will accept a mattress up to 5½” (14 cm) thick and residential units accept a mattress up to 4” (10.2 cm). Engineered low-profile linkage keeps all metal parts below the mattress line, while being the easiest to operate in the industry. Frames are a forest black color. The warranty on the residential units is for 3 years and on the contract units the warranty period is 3 years. Contract Unit

• Body-support tubes and wires together enhance support in the body section to eliminate sagging. • The cross tubes keep the unit square and enhance unit strength • Dual one-piece tubular legs provide enhanced stability and strength, allowing the unit to be operated from the center or side position • Pro-Deck™ two-ply ballistic decking material enhances durability and visual appeal • Seat-support wires provide support while sleeping, adding durability to the overall unit. Support wires also give the quality feel of stationary seating

Residential Unit

• Anti-Tilt: a necessary safety feature, keeping the unit in contact with the floor at all times in the open position • Available with TV headrest

7389 Contract Double Hide-a-Bed Unit

Contract Queen Hide-a-Bed Unit 7390

• Price Breaks: Each / 20 • Unit of measure: Each • Heavier duty frames for use in the hospitality industry • Double: 60” x 72” (152.4 x 182.9 cm), Queen: 68” x 72” (172.7 x 182.9 cm) • Premium high quality, heavy-duty/contract, all-square tubular frame construction, dual one-piece tubular legs. Note: Subtract 8” (20.3 cm) for mattress width (Double: 52” width, Queen: 60” mattress) • Warranty 3 years

Visit www.jennisfabrics.com

281


SPR

Springs

HI

Hide-a-Beds Contract Double Coil Mattress 7397

Contract Queen Coil Mattress 7399

• Price Breaks: Each / 5 • Unit of measure: Each • Heavy duty mattress units of a 5” (12.7 cm) depth to fit directly into the hide-a-bed units. Finished with F.R* quilted mattress ticking and reinforced seams with binding. These units are recommended for any contact applications. • Double: 54” x 72” (137.2 x 182.9 cm), Queen: 60” x 72” (152.4 x 182.9 cm) • Disclaimer: Ship at your own risk. *This term and any corresponding data refer to typical performance in the test indicated and should not be construed to imply the behavior of this or any other material under actual fire conditions.

Residential Double Hide-a-Bed Unit 7392

Residential Queen Hide-a-Bed Unit 7393

• Price Breaks: Each / 20 • Unit of measure: Each • Residential duty hide-a-bed units are an economical replacement for worn or damaged units or for use in more affordable units. • Double: 60” x 72” (152.4 x 182.9 cm), Queen: 68” x 72” (172.7 x 182.9 cm) • Standard duty, dual one-piece tubular legs, all-round tubular frame construction. Note: Subtract 8” (20.3 cm) for mattress width (Double: 52” width, Queen: 60” mattress) • Warranty 3 years (residential)

Residential Double Coil Mattress 7396

Residential Double Coil Mattress 7398

• Price Breaks: Each / 5 • Unit of measure: Each • Finished 5” (12.7 cm) depth coil mattress units fit directly into the above or other similarly sized hide-a-bed frames. These units are finished with a quilted mattress ticking and reinforced seams with binding. Recommended for domestic use. • Double: 53” x 72” (134.6 x 182.9 cm), Queen: 59½” x 72” (151 x 182.9 cm)

282

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


Residential Double Replacement Deck 7385

SPR

Springs

HI

Hide-a-Beds

Contract Double Replacement Deck 7386

• Price Breaks: Each • Unit of measure: Each • Replacement non-tearing decks for hide-a-bed units.

Visit www.jennisfabrics.com

283


STA

Staples

14

1400 Series

Tackers Pneumatic tackers have been the choice of professionals for years. They are simple, easy to maintain and have very few moving parts. They are also adjustable by regulating the air pressure so you can accommodate driving staples into many different surfaces with the correct stroke. The parts that do wear, the piston and driver are replaceable. A good air tacker will outlast any electric tacker and is more versatile. The one drawback is the need for pressurized air. They are not as portable as electric tackers and may not be suitable for smaller shops without compressors.

1400 Series Staples

• Price Breaks: Box / Case (see below) • Unit of measure: Box • Case: #7254: 200, #7255: 200, #7256: 200, #7257: 200, #7258: 120. • 1400 Series Staples to fit standard tackers, Fasco 1400 series, Minico 1416 and Haubold staplers. Staple width is approximately ⅜” (0.95 cm).

7254 1400/6 ¼” (0.6 cm) 5 1400/8 /16” (0.8 cm) 7255 1400/10 3/8” (0.95 cm) 7256

1400/12 ½” (1.3 cm) 7257 1400/14 9/16” (1.4 cm) 7258

1400 series shown at actual size:

#7254

#7255

#7256

#7257

#7258

TO SCALE

284

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


STA

Staples

71

71 Series

71 Series Staples • Price Breaks: Box / Case (200) • Unit of measure: Box • Staples to fit the Fasco 71 series tacker, JEFast 71, or Senco staplers. Staple width is approximately ⅜” (0.95 cm).

71/6 ¼” (0.6 cm) 71/8 5/16” (0.8 cm) 71/10 3/8” (0.95 cm) 71/12 ½” (1.3 cm)

7278 7279 7280 7282

71 series shown at actual size

#7278

#7279

#7280

#7282

TO SCALE

1400 Steel 3/8” SS Staples

STA

Staples

ST

Stainless Steel

7260

• Price Breaks: Box / 200 • Unit of measure: Box • Stainless steel staples for the air tackers, carried in a ⅜” (0.95 cm) size only. Others are available special order based on quantity. More expensive than standard, but stronger and more rust resistant. • Stainless steel staples for the 1400 series Fasco air tacker or Haubold stapler.

Visit www.jennisfabrics.com

285


STA

Staples

ST

Stainless Steel 71 Series 3/8” SS Staples

7261 • Price Breaks: Box / 200 • Unit of measure: Box • Stainless steel staples for the Fasco 71 series tacker or Senco stapler

STA

Staples

DU

Duo-Fast

3112 3/8” Staples

7237

3116 ½” Staples

7239

• Price Breaks: Box / 12 • Unit of measure: Box • These staples fit the standard EIC 3118 Duo-Fast electric tacker. Approximate width of ⅜” (0.95 cm) • Shown actual size:

#7237

#7239

TO SCALE

286

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


5012 3/8” (0.95 cm) Staples

STA

Staples

DU

Duo-Fast

TOO

Tools

TA

Tackers

7244

• Price Breaks: Box / 24 • Unit of measure: Box • Staples with a width of ½” (1.27 cm) to fit the HE 5018 series standard electric tacker. • Shown actual size:

TO SCALE

Fasco 1400 Series Tacker

7211

• Price Breaks: Each • Unit of measure: Each • High quality Fasco pneumatic tacker for use with the staples listed above. Piston/ driver assembly also available (#7214).

Visit www.jennisfabrics.com

287


TOO

Tools

TA

Tackers Fasco 71 Series Tacker

7210 • Price Breaks: Each • Unit of measure: Each • Top quality pneumatic stapler for use with 71 series staples on page 285. These narrower staples are useful as a finishing staple. Replacement piston/driver assembly available (#7215).

JEFast 1416 Air Tacker

7216 • Price Breaks: Each • Unit of measure: Each • An economical tacker for the smaller shop. Replacement driver available (#7218).

JEFast 7116 Air Tacker

7217 • Price Breaks: Each • Unit of measure: Each • Economical JEFast stapler for the smaller shop. Replacement driver set available (#7219).

288

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


TAC

Tacks

NA

Nails

Steel Decorative Nails Decorative nails are used to compliment show woods and gimps on furniture as well as to anchor nail strips and trims. A large assortment of colors and designs are available. Decorative nails should be set lightly in place with a tack hammer, then final set with a mallet to avoid damaging the ornamental face.

/8” Dark Natural Nail

5

• Price Breaks: Box / 5 • Unit of measure: Box (varies, see below) • Oxidized dark finish version of the French natural decorative nail. • Per box: #5906: 1000. #5908: 500, #5910: 250, #5913: 250 • Head diameter:

/16” (1.1 cm) /8” (1.6 cm) 7 /8” (2.2 cm) 31 /32” (2.4 cm) 7 5

5906 5908 5910 5913 TO SCALE

¾” Dark Natural Nail

5916

• Price Breaks: Box • Unit of measure: Box of 5000 • Nail length: ¾” (1.9 cm), head diameter: 11/16” (1.7 cm).

TO SCALE

Visit www.jennisfabrics.com

289


TAC

Tacks

NA

Nails

5

/8” French Natural Nail

• Price Breaks: Box / 5

#6005: Box

• Unit of measure: Box (varies, see below) • Per box: #6000: 1000, #6002: 500, #6020: 250, #6005: 4000, #6006: 250 • Head diameter:

6000 6002 6020

/16” (1.1 cm) /8” (1.6 cm) 7 /8” (2.2 cm) 7 5

¾” French Natural Nail

/8” (2.2 cm) 1” (2.5 cm) 7

6005 6006

6010 • Price Breaks: Box • Unit of measure: Box of 500 • Nail length: ¾” (1.9 cm), head diameter: 11/16” (1.7 cm).

TO SCALE

4 Triangle Square Nail Natural 6014

4 Triangle Square Nail French Natural 6015

4 Triangle Square Nail Old Copper 6016orer cilisi

• Price Breaks: Each / 100 • Unit of measure: Box of 1000 • Decorative upholstery nails. These nails provide decorative accents for fine upholstery. Approximately ⅝” x ⅝” (1.6 x 1.6 cm). ¾” (1.9 cm) nail.

290

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


TAC

Tacks

NA

Nails

#210 ½” Decorative Nail Nickel Plated 6021 • Price Breaks: Box / 5 • Unit of measure: Box of 1000 • The #210 nail is a smooth head with a lower profile than the #9 nail. Nail length: ½” (1.3 cm), head diameter: 7/16” (1.1 cm).

#210 ¾” Decorative Nail Nickel Plated 6022

#210 ¾” Decorative Nail Black 6024

#210 ¾” Decorative Nail White 6026er cilisi

• Price Breaks: Box / 5 • Unit of measure: Box of 1000 • The #210 nail is a smooth head with a lower profile than the #9 nail. Nail length: ¾” (1.9 cm), head diameter: 7/16” (1.1 cm).

1515A ½” Decorative Nail Antique

6031

1515A ¾” Decorative Nail Antique 6032

• Price Breaks: Box / 5 • Unit of measure: Box of 1000 • Antique finish on hammered “tortoise shell” design head. #6031: Nail length: ½” (1.3 cm), head diameter: 7/16” (1.1 cm). #6032: Nail length: ¾” (1.9 cm), head diameter: 7 /16” (1.1 cm).

Visit www.jennisfabrics.com

291


TAC

Tacks

NA

Nails

1515 ½” Decorative Nail Nickel Plated 6034 • Price Breaks: Box / 5 • Unit of measure: Box of 1000 • Bright silver finish on the “tortoise shell” design nail. Nail length: ½” (1.3 cm), head diameter: 7/16” (1.1 cm).

1533 ½” Decorative Nail Antique

6037 • Price Breaks: Box / 5 • Unit of measure: Box of 1000 • Floral head design decorative nails. Nail length: ½” (1.3 cm), head diameter: 7/16” (1.1 cm).

#9 Plated Nail • Price Breaks: Box / 5 • Unit of measure: Box of 1000 • Plain head decorative nail with bright brass polished finish. Nail length: ½” (1.3 cm), head diameter: 7/16” (1.1 cm).

#9 ½” Brass Plated #9 ½” Nickel Plated #9 ½” Antique Brass #9 ½” French Natural 292

6041 6045 6047 6049

6046 #9 ¾” Nickel Plated #9 ¾” Antique Brass 6048 #9 ¾” French Natural 6050

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


1105 5/8” Decorative Nail Black OX 5922

1105 5/8” Decorative Nail Pewter OX 5923

TAC

Tacks

NA

Nails

1105 5/8” Decorative Nail Brass OX 5924orer cilisi

• Price Breaks: Box • Unit of measure: Box of 100 • Round hammered finish. Nail length: ⅝” (1.6 cm), head diameter: ¾” (1.9 cm).

0698 1” Decorative Nail Black OX

5925

0698 1” Decorative Nail Pewter OX 5926

• Price Breaks: Box • Unit of measure: Box of 100 • Basket weave. Nail length: ⅝” (1.6 cm), head diameter: 1” (2.54 cm).

1420 1” Decorative Nail Brass OX

5917

• Price Breaks: Box • Unit of measure: Box of 100 • Round with rolled edge. Nail length: ⅝” (1.6 cm), head diameter: 1” (2.54 cm).

Visit www.jennisfabrics.com

293


TAC

Tacks

NA

Nails

Nail Strip French with ½” Nails 6012

Nail Strip Nickel with ½” Nails 6013

• Price Breaks: Roll / 5 • Unit of measure: 50 yard/45.7 m roll • Hole every fourth cap for a real nail to anchor the strip and allow you to secure it around curves or other shapes. Plain head decorative nail. Head diameter is 7/16”. • The Continuous Nail Strip will simulate a row of evenly spaced #9 nail without all the measuring, time and nails. Speeds up upholstering operations and cuts costs 50-80%. Absolute accurate spacing for uniform, professional appearance. Nails are supplied with roll.

1095 ¾” Decorative Nail Brass OX 5918

1095 ¾” Decorative Nail Copper OX 5919

1095 ¾” Decorative Nail Black OX 5920rrer cilisi

1095 ¾” Decorative Nail Pewter OX 5921

• Price Breaks: Box • Unit of measure: Box of 100 • Bull nose, hammer finish. Nail length: ⅝” (1.6 cm), head diameter: ¾” (1.9 cm).

¾” x 11/8” Panel Nail

6008

¾” x 11/8” Threaded Panel Nail 6009

• Price Breaks: Package / 10 / 50 • Unit of measure: Package of 100 • Updated panel nails both plain and threaded style are available. Used for securing panels to wooden frames and other assemblies, where the large head prevents the nail from pulling through. Head diameter: ¾” (1.9 cm), nail length: 1⅛” (2.9 cm).

294

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


Metal Tacktite Tack Strip 24” 8329

Punchout Tack Strip 27” 8331

TAC

Tacks

ST

Strip

Punchout Tack Strip 30” 8332orer cilisi

• Price Breaks: Package / 5 • Unit of measure: Package of 100 • For extra hold, serrated teeth have been punched through this 10 oz. (283 g) metal strip. They give the ultimate grip in the wood frame once set. 24” (60.9 cm) and 27” (68.6 cm) lengths minimize the need to cut the product.

Cardboard Tacking Strip 8349 • Price Breaks: Each / 10 • Unit of measure: 5lbs./2.3 kg bundle • ½” (1.3 cm) strips of cardboard in 38” (96.5 cm) lengths for use as an edge stiffener and tack strip when blind tacking covers to a frame. Can be easily torn by hand and will accept a degree or curve without buckling. A 5lbs. (2.3 kg) bundle contains about 350 strips.

Fiber Tacking Strip Coils ½”

8351

• Price Breaks: Each / 5 • Unit of measure: 535 foot/163 m roll • ½” (1.3 cm) fiber tacking strip in a continuous coil of 535’ (163 m) for the production line. Tough enough for most uses but can be torn to length by hand for the fastest application of cover fabrics.

Visit www.jennisfabrics.com

295


TAC

Tacks

UP

Upholstery

Curve Ease Tacking Strip

Heavy Duty Curve Ease - 3 Prong 8341

8339

• Price Breaks: #8339: Roll / 5

#8341: Roll / 10

• Unit of measure: 100 foot/30.4 m roll • The ideal solution for attaching a cover to difficult curved areas. Eliminates time consuming hand sewing, blind stitching, decorative nails and gimp tacks. Sturdy pliable metal provides ample strength for shaping into any curve for any style. Sharp metal prongs in a series of two or three (in the case of heavy duty) grip fabrics or plastics. Prongs are closely spaced to eliminate unwanted scalloping of the fabric.

Blued Upholstery Tacks

• Price Breaks: Box / 10 • Unit of measure: Pound • Blued upholstery tacks in 1lb. (0.45 kg) boxes.

8202 8203 8204

3 oz. 4 oz. 6 oz.

10 oz. 12 oz. 14 oz.

Shown to actual size:

3 oz.

4 oz.

6 oz.

10 oz.

12 oz.

14oz.

TO SCALE

296

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS

8206 8207 8208


Berry Staple Remover 8041

#402 ½” Staple Remover 8046

TOO

Tools

TA

Tack

#121 Comb Type Staple Remover 8047lorer cilisi

#402 Ripping Chisel 8034

• Price Breaks: Each

• Price Breaks: Each

• Price Breaks: Each

• Price Breaks: Each

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

• Two grooves, to enable you to grab the staple

• Combination staple and tack remover with notched, chiselled blade to get under the most stubborn staples.

• Light and versatile tool for removing staples or tacks.

• For the worst staples and tacks. Tough plastic handle will accept mallet blows to get under the worst fastener.

#120 ½” Staple Lifter

8048

• Price Breaks: Each • Unit of measure: Each • This lifter has the correct angle for removing staples of any size from the smallest to the long leg staples and shredded materials. Tough plastic handle. Best choice for staples buried deeply when damaging the wood would be a problem. • Tip on staple removers: When pulling staples from very soft wood or when prying against show wood, you will sometimes want to use a small piece of metal (an old ruler section is ideal) under the remover so that you are levering against this and not putting dents in the wood.

Pneumatic Ripping Tool 8045

Replacement Staple Remover Attachment 8042

Replacement Puller Attachment 8049er cilisi

• Price Breaks: Each • Unit of measure: Each • New tool makes short work of stripping furniture • An adjustable tool that takes the strain out of removing tacks, staples, and other fasteners from furniture frames. Comes complete with attachments. This air tool can be adjusted be regulating the air pressure to compensate for hard or soft woods. It can also be used to lift all kinds of fasteners out of woods, as well as lifting shredded fabric that has “glued” itself to the frame over time. Ideal for speeding up one of the worst jobs in the shop: stripping furniture.

Visit www.jennisfabrics.com

297


TAP

Tapes

RE

Reflective

Reflective Materials J. Ennis Fabrics is an authorized distributor of the 3M™ lineup of reflective tapes, films and materials. We have access to a wide range of these products to cover any need. While this is primarily a product used in garments, it has many applications, wherever it is important to be seen. It is often incorporated into sports bags, runners, and accessories for athletes and joggers as well as clothing. Please remember that the items that are stocked represent the most popular items in this line. There are many other products available. We can provide immediate service on the stocked items, and other items are readily available on a special order basis. There are full specification sheets on every product in the 3M™ line, allowing you to find that material that will best suit your needs. The garment industry has strict standards, especially when working with items that will be used in the law enforcement and emergency services areas. 3M™ is a world leader in not only meeting but exceeding these standards. Scotchlite™ material is also more wash durable and substantially brighter than other reflective materials. Please note: While the use of Scotchlite™ reflective material does greatly enhance visibility, no reflective material can assure absolute visibility, particularly in adverse weather conditions. 3M™ Scotchlite™ Reflective Material Colored Fabric Trim

298

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


TAP

Tapes

RE

Reflective

Reflective Materials (continued) 3M™ Scotchlite™ Freflective Matial Silver Glass Bead Fabric Trim

*Coeffient of retroflective (RA) measured at -4° entrance angle and 0.2° observation angle (in cd/lux/m2) **Consult regulation or standard for details ***Refer to product data sheets for complete care guide information

Visit www.jennisfabrics.com

299


TAP

Tapes

RE

Reflective

Scotchlite™ Iron On Fabrics This is a highly reflective material with a wide angle reflectivity designed to greatly enhance the night visibility of the wearer. A removable plastic liner protects the heat activated (iron on) dry adhesive on the back of the film. Scotchlite™ 8710 and 8787 are suitable for light to medium weight fabrics and have very good stretch properties. The film will provide high attention value when visibility is poor, especially at night. The fluorescent color is especially conspicuous under daytime conditions. It will remain highly reflective when viewed at wide entrance angles. Performance can vary depending upon actual use, exposure conditions and maintenance. Die cutting is recommended for these goods, although they can also be hand-cut, guillotined, kiss-cut or plotter cut. Applications on fabrics is best achieved over a flat surface where uniform heat and pressure can be applied. Avoid applying film over seams and stitches. Application to fabrics: 1. Remove the plastic liner, exposing dry adhesive (do not remove paper carrier) 2. Place on substrate with adhesive side down, apply heat 163-190°C (325-375°F) and pressure, with dwell time of 10-20 seconds and pressure. The addition of a non-stick slip sheet between the platen and laminating surface will prevent the transfer of contamination (i.e. excess adhesive) from the platen. Do not exceed lamination temperatures of 190°C (375°F) as the protective paper liner may become difficult to remove. If higher temperatures are required for lamination, first use the above recommended procedure, remove paper liner, and then re-laminate the higher temperature with a non-stick slip sheet between the platen and the lamination surface. 3. Allow the application to cool before removing paper liner. Note: This is a general guideline for the heat lamination of this product. User should make a test application to assure adequate adhesion to the substrate. While many fabrics may be used as lamination substrates, nylons and fabrics treated with a durable water repellent are difficult to adhere to and are not recommended. This product has a recommended shelf life of one year, and should be stored in a cool dry area. Roll should be stored on a rod or pipe through the core. Care instructions, in order of preference: 1. For the best retention of brightness, machine wash warm (40°C, 104°F), tumble dry low. 2. Damp wipe using warm water detergent. Rinse thoroughly. 3. Professionally dry clean, tumble dry warm (30°C, 86°F maximum). Note: Repeated dry cleaning may cause slight stiffening, but the reflectivity will not be affected.

#8710 ½” Silver Transfer Film 11120

#8710 ¾” Silver Transfer Film 11121

#8710 1” Silver Transfer Film 11122orer cilisi

• Price Breaks: Yard / 25 / 200 • Unit of measure: Yard

300

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


TAP

Tapes

RE

Reflective

#8787 2” Lime/Yellow Transfer Film 11158 • Price Breaks: Yard / 25 / 109 • Unit of measure: Yard

Scotchlite™ Reflective Tape This material can be attached to a wide range of light and medium weight fabrics, but is not recommended for attachment to highly elastic materials. Uses include accessories, uniforms, rain wear, jackets, active wear, head wear, backpacks, armbands, straps, belts, cut out letters and numbers, patches and crests. Application to fabric: Sew in place using a lock stitch with no more than 12 stitches per 1” (2.54 cm) and placed at least 5/64” (2 mm) from the edge of the reflective fabric. Cutting: The material can be hand-cut, die-cut or guillotined. Care instructions: These are guidelines for the care of the product, please test application first. 1. For the best retention of brightness, machine wash warm (40°C, 104°F), tumble dry low. 2. Professionally dry clean, tumble dry warm (30°C, 86°F maximum). 3. Hand ironing; use warm setting (160°C, 320°F) and press cloth. Note: Maximum shrinkage is 3%. Recommended shelf life is two years and should be stored in a cool, dry area. Rolls should be stored on a rod or pipe through core.

#8910 ½” Sliver Fabric Trim 11132

#8910 1” Sliver Fabric Trim 11133

#8910 2” Sliver Fabric Trim 11135r cilisi

• Price Breaks: Yard / 25 / 200 • Unit of measure: Yard • This is a highly reflective fabric consisting of exposed wide angle lenses bonded to a durable cloth backing composed of 65% polyester and 35% cotton. It is lightweight and flexible, and has a daytime appearance of metallic silver. The nighttime appearance is a brilliant silver-white when viewed by a drive in vehicle headlights.

Visit www.jennisfabrics.com

301


TAP

Tapes

RE

Reflective

Scotchlite™ Fluorescent Fire Retardant Tape This is a highly reflective fabric consisting of exposed wide angle lenses bonded to durable cloth backing composed of 94% polyester and 6% cotton. It is lightweight and flexible, and has an enhanced daytime appearance. This provides high attention value when the visibility decreases, particularly at dawn or dusk. The nighttime appearance is a brilliant orange or yellow, and provides reflectivity bases on a wide range of light source angles. This material can be attached to a broad range of medium and heavy weight fabrics. It has been tested for flame resistance according to the Federal Test Method Standard 191A, Method 5903. Average chair length is less than 6” (15.2 cm). Application to fabric: Sew in place using a lock stitch with no more than 12 stitches per 1” (2.54 cm) and placed at least 5/64” (2 mm) from the edge of the reflective fabric. Use of a Teflon coated needle may extend needle life. Do not apply this product to highly elastic materials. Cutting: The material can be hand-cut, die-cut or guillotined. Care instructions: These are guidelines for the care of the product, please test application first. 1. Professionally dry clean, solvent temperature < 30°C (85°F). Tumble dry warm 48°C (120°F). 2. Damp wipe using warm water and mild detergent. Rinse thoroughly, dry with a soft cloth or allow to air dry. 3. Machine wash warm (40°C, 104°F), tumble dry low. Note: Maximum shrinkage is 3%. Recommended shelf life is two years and should be stored in a cool, dry area. Rolls should be stored on a rod or pipe through core.

#8987 1” Fluorescent Lime/Yellow FR 11141

#8987 2” Fluorescent Lime/Yellow FR 11143

• Price Breaks: Yard / 25 / 109 • Unit of measure: Yard

#8986 2” Fluorescent Red/Orange FR 11139 • Price Breaks: Yard / 25 / 109 • Unit of measure: Yard

302

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


TAP

Tapes

RE

Reflective

Scotchlite™ High Gloss Application to fabric: Sew in place using a lock stitch with no more than 8 stitches per 1” (2.54 cm) and placed within the border of the reflective fabric. To reduce shrinking, apply a non-stick material (Teflon, silicon, or nylon) to the bottom of the presser foot. Welding the fabrics: High Gloss Trims are composed primarily of vinyl materials and will weld to most PVC films with one of the following methods: radio frequency, dielectric or ultrasonic. Adhesion to specific films will vary. It is important to test adhesion with each new lot and each new vendor. RF sealing is the most widely used method of sealing. It has the advantage of being able to handle patches and trims using a step and repeat process, giving versatility. Sealing films: 7-10 mm white pigmented plasticized vinyl film is recommended. Screen printing: 3M Scotchlite™ screen printing inks can be used for printing on the vinyl surface of the high gloss trims. Care instructions: These are guideline for the care of the product, please test application first. 1. Damp wipe using warm water and mild detergent. Rinse thoroughly, dry with a soft cloth. 2. Machine wash warm (40°C, 104°F), tumble dry low. Vinyl dyes may migrate when placed in direct contact with vinyl and some fabrics. Prior to application, colored trim must be kept separate and should be tested for dye migration. Note: Recommended shelf life is two years and should be stored in a cool, dry area. Rolls should be stored on a rod or pipe through core.

#6160 13/8” High Gloss Trim White

11144

• Price Breaks: Yard / 25 / 109 • Unit of measure: Yard • This white reflective material has a glossy vinyl coating that gives it a shimmering, almost wet look. Appears white as a daytime color, and reflects a brilliant white.

#6187 2” High Gloss Lime/Yellow

11150

• Price Breaks: Yard / 25 / 109 • Unit of measure: Yard • Designed for maximum daytime visibility. The brilliant yellow reflective material has a glossy vinyl coating that gives it a shimmering wet look. This item consists of retroreflective microprisms formed on flexible, glossy and UV stabilized polymeric film. Both daytime and nighttime appearance are a brilliant yellow, and this material is particularly conspicuous under daytime, dawn and dusk conditions.

Visit www.jennisfabrics.com

303


TAP

Tapes

RE

Reflective

Scotchlite™ Vest Trim Scotchlite™ Vest Trim is designed to enhance 24 hour visibility. It combines a bright fluorescent element with a highly reflective silver stripe. The fluorescent is especially noticeable in conditions of poor visibility, particularly at dusk and dawn. When viewed at night by a driver using vehicle headlights, the trim will appear as a brilliant silver-white. This material can be attached to a wide range of light and medium weight fabrics, but it is not recommended for attachment to highly elastic materials. Application to fabric: Sew in place using a lock stitch with no more than 12 stitches per 1” (2.54 cm) and placed at least 5/64” (2 mm) from the edge of the reflective fabric. Use of a Teflon coated needle may extend needle life. Do not apply this product to highly elastic materials. Cutting: The material can be hand-cut, die-cut or guillotined. Care instructions: These are guidelines for the care of the product, please test application first. 1. Damp wipe using warm water and mild detergent. Rinse thoroughly, dry with a soft cloth or allow to air dry. 2. This product can withstand up to 10 home wash and dry cycles with minimum performance loss. Machine wash warm (45°C, 105°F), tumble dry low. Do not use chlorine bleach. Note: Recommended shelf life is two years and should be stored in a cool, dry area. Rolls should be stored on a rod or pipe through core. Cut sheets may be stored flat.

#8472 2” Orange Vest Trim 11129

#8471 1½” Lime/ Silver Vest Trim 11130

#8471 2” Lime/ Sliver Vest Trim 11131orer cilisi

• Price Breaks: Yard / 25 / 300 • Unit of measure: Yard

Scotchlite™ Silver Fabric Application to fabrics: Whenever two or more pieces of 8925 Silver fabrics are used together on a single surface or as a set, they should be matched to ensure uniform daytime color and nighttime or low-light reflectivity. Cutting: The material can be hand-cut, die-cut, or guillotined. Sewing: Sew in place using a lock stitch with no more than 12 stitches per 1” (2.54 cm) and placed at least 5/64” (2 mm) from the edge of the reflective fabric. Thread recommendation: 100% polyester. Care Instructions: Maximum wash temperature 60°C (140°F). Only non-chlorine bleach when needed. Tumble dry low. Use medium iron (150°C, 300°F). Note: 8925 Silver fabric contains an aluminum layer as part of its construction. Blemishing of this aluminum layer can occur if the front surface of the product has direct contact from hands during application, then exposed to hot and humid conditions, greater than 26°C (80°F) and greater than 70% relative humidity, for a period of weeks. These blemishes do not affect the performance of the product.

304

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


#8925 2” Silver Fabric Poly/Cotton 11160

TAP

Tapes

RE

Reflective

• Price Breaks: Yard / 25 / 100 • Unit of measure: Yard • #8925 Silver fabric is composed of wide angle, exposed retroreflective lenses bonded to a durable polyester/cotton cloth backing.

Scotchlite™ FR Industrial Wash Application to fabric: Whenever two or more pieces of 8940 FR Industrial Wash fabrics are used together on a single surface or as a set, they should be matched to ensure uniform daytime color and nighttime or low-light reflectivity. Cutting: The material can be hand-cut, die-cut, or guillotined. Sewing: Sew in place using a lock stitch with no more than 12 stitches per 1” (2.54 cm) and placed at least 5/64” (2 mm) from the edge of the reflective fabric. Use appropriate thread for flame resistant applications. Care instructions: Use low-medium alkaline, high surfactant detergents. Stain treatment wash processing will greatly reduce the life of 8940. Do not use detergents that contain free sodium hydroxide or potassium hydroxide. Do not use solvenated surfactants. Do not use chlorine bleach. Maximum wash temperature 75°C (165°F). Break/suds cycle less than 15 minutes total. Tunnel dry - maximum input temperatures must not exceed 120°C (250°F). Tumble dry - maximum exhaust temperature 90°C (195°F). Pressing - Do not exceed 150°C (300°F). Note: #8940 contains an aluminum layer as part of its construction. Blemishing of this aluminum layer can occur if the front surface of the product has direct contact from hands during application, then exposed to hot and humid conditions, greater than 26°C (80°F) and greater than 70% relative humidity, for a period of weeks. These blemishes do not affect the performance of the product.

11162 #8940 1” FR Industrial Wash Sew On • Price Breaks: #11162: Yard / 25 / 200

#8940 2” FR Industrial Wash Sew On 11157

#11157: Yard / 25 / 100

• Unit of measure: Yard • 8940 Silver Industrial Wash Flame Resistant fabric is composed of wide angle, exposed retroreflective lenses bonded with a special polymer layer to an aramid backing. 8940 meets or exceeds the following tests as specified in NFPA 1971 Standard, 2000 Edition, ANSI/ISEA 107-1999 and EN471 Class 2 retroreflective performance specifications.

Visit www.jennisfabrics.com

305


TAP

Tapes

RE

Reflective

Scotchlite™ Industrial Wash Application to fabric: Whenever two or more pieces of 9920 Industrial Wash fabrics are used together on a single surface or as a set, they should be matched to ensure uniform daytime color and nighttime or low-light reflectivity. Cutting: The material can be hand-cut, die-cut, or guillotined. Sewing: Sew in place using a lock stitch with no more than 12 stitches per 1” (2.54 cm) and placed at least 5/64” (2 mm) from the edge of the reflective fabric. Thread recommendation: 100% polyester. Care instructions: Stain treatment wash may reduce the life of 9920. Use low-medium alkaline, high surfactant detergents. Do not use solvenated surfactants. Do not use chlorine bleach. Maximum wash temperature 75°C (165°F). Break/suds cycle less than 20 minutes total. Tunnel dry - maximum input temperatures must not exceed 160°C (320°F). Tumble dry - maximum exhaust temperature 90°C (195°F). Drying time not to exceed 7 minutes. Pressing - Do not exceed 150°C (300°F). Note: Recommended shelf life is two years and should be stored in a cool, dry area. Rolls should be stored on a rod or pipe through core.

#9920 2” Industrial Wash Sew On SIlver 11153 • Price Breaks: Yard / 25 / 200 • Unit of measure: Yard • 9920 Silver Industrial Wash fabric is composed of wide angle, exposed retroreflective lenses bonded with a special polymer layer to a durable 100% polyester cloth backing. Certified to meet ANSI/ISEA 107-1999 Level 2 retroreflective performance and EN 471 Class 2 retroreflective performance.

#9187 Industrial Wash Lime w/ Silver 11156 • Price Breaks: Yard / 109 • Unit of measure: Yard • Note: 9187 contains an aluminum layer as part of its construction. Blemishing of this aluminum layer can occur if the front surface of the product has direct contact from hands during application, then exposed to hot and humid conditions, greater than 26°C (80°F) and greater than 70% relative humidity, for a period of weeks. These blemishes do not affect the performance of the product.

306

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


TAP

Tapes

RE

Reflective

Scotchlite™ SOLAS 3M™ Scotchlite™ Reflective Material SOLAS (Safety of Life at Sea) grade products are intended for reflectorizing SOLAS life support equipment such as life vests, jackets, and rafts. It conforms to Marine Equipment Directive 96/98/EC and International Maritime Organization (IMO) Resolution A.658 (16) Annex 2. It is approved by the US Coast Guard to meet 46 CFR part 164, subpart 164.018 for Type I and II retroflectible material used to enhance visibility of life saving equipment in nighttime or low light conditions. SOLAS grade products have a European mark of conformance. All products are silver in color under daytime viewing conditions and reflect a bright white. Reduction in durability will occur when the usage requirements are particularly severe, such as work life jackets and rubber rafts that are used to maintain harbor facilities, coastal waterways and industrial equipment in the water or on decks; lifesaving appliances with continuous outdoor exposure; heavy wear and tear; and chemical exposure and washing. For silicone based fabrics use 3M™ Scotchlite™ Reflective Material - SOLAS Grade series 6700 products. Cutting: The material can be hand-cut, die-cut, or guillotined. Use sharp die or blades made of steel or magnesium. To ensure smooth edges, limit the layers of SOLAS when cutting. Sewing: Sew in place with 7-9 stitches per 1” (2.54 cm) and not less than 5/64” (2 mm) from the edge of the material. Thread recommendation: #69 nylon (Quality thread and notions 1-800-521-4308) or other UL approved threads. Stitch: 3/16” (4.8 mm) lock stitch. Screen printing: Below are inks that can be used for printing on the surface of 3M™ Scotchlite™ Reflective Material - SOLAS Grade products. All inks should be continuously tested to ensure acceptable adhesion in the event of changes occurring in the manufacturing process or composition of the ink. Prior to printing, wiping the surface with a soft cloth lightly dampened with alcohol may help ink adhesion. Care instructions: Wash by hand with a sponge cloth using warm water and detergent. Rinse thoroughly. Remove oil and tar with a mild solvent, such as VM and P Naphtha or mineral spirits, followed by warm water and detergent. Rinse thoroughly. Do not machine wash. Do not bleach. Do not tumble dry. Do not iron. Do not dry clean. Storage: Store in a cool, dry place and use within one year after date of receipt. Store rolls or panels in original shipping cartons. Return partially used rolls to the carton or suspended horizontally through the core.

#6755 2” SOLAS Sew On Silver

11159

• Price Breaks: Yard / 25 / 100 • Unit of measure: Yard

Visit www.jennisfabrics.com

307


TAP

Tapes

RE

Reflective #8830 1” Silver Pressure Sensitive

11123

• Price Breaks: Yard / 25 / 100 • Unit of measure: Yard • Scotchlite™ Pressure sensitive Reflective Tape offers the enhanced daytime/nighttime visibility of the wearer. Meets the flame resistant test 191A, Method 5903. Can be cut into a variety of shapes, sizes, numbers and letters. A highly aggressive product with 3M™ adhesive, it is applicable for hard surfaces such as helmets, in line skates, sports active protective pads, bicycles, etc. Will retain 50% brightness after 5 minute exposure at 260°C (500°F), when applied to fire helmets. • Note: This is a peel and stick product, not for use on flexible surfaces.

TAP

Tapes

TR

Transfer ¼” Marine Transfer Tape

7991

½” Marine Transfer Tape 7992

• Price Breaks: #7991: Roll / 12 / 108

#7992: Roll / 12 / 72

• Unit of measure: 36 yard/33 m roll • Prevent seam slippage and enhance waterproofing. • This product is a high tack acrylic double coated tape, designed to provide high initial adhesion and excellent bond to most canvas and acrylic fabrics. Simply roll tape onto the fabric where the seam is to be made. The exposed side of the tape is tacky as well. The second fabric is then held in place when placed over top. The tape holds firmly to prevent slippage during sewing and helps to prevent seam leakage. If you are working on awnings or canvas covers, this product will enhance the quality of your final product.

308

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


2” Carton Sealing Tape

TAP

Tapes

MI

Miscellaneous

7990

• Price Breaks: Roll / 6 / 36 • Unit of measure: 328’/100 m roll • All round polypropylene packaging tape; 2” (5.1 cm) width. Has good moisture and impact resistance.

2” Hand Tape Dispenser 7985 • Price Breaks: Each / 5 • Unit of measure: Each • Sturdy and durable dispenser will handle tapes from 1½” - 2” (3.8 - 5.1 cm) wide. Easy to load, makes packaging and carton sealing a breeze.

Hand Stretch Film

7987

• Price Breaks: Each / 4 • Unit of measure: 519 yard/475 m roll • This product features increased puncture resistance, elevated tear resistance, superior optics and maximum load retention. Reduced neck down lower packaging costs and reduces the initial film width. “Quiet Unwind” eliminates the distracting noise generated by many films but still maintains a secure cling.

Visit www.jennisfabrics.com

309


THR

Thread

Notes

Thread Notes A great deal of thought and effort is required to make a good quality, consistent thread. Consider the demands placed on this product. Thread is expected to be consistent to the point that the tensions on a machine only need to be set once for any batch. A thread’s color needs to match from one batch to the next. When going through the needle cycle in an industrial machine, the thread is accelerated to over 150 mph in two opposite direction in each stitch. The needle heats up to an amazing degree, enough to fuse certain threads. This is all repeated endlessly while sewing and the thread work through this to produce a flat, strong, even seam when properly tensioned and matched to the machine and fabric being sewn. Threads are produced from either natural or synthetic materials. Cotton is the most commonly used natural material. Speciality threads, made of silk or linen (flax) are available but they are expensive and may be replaced by stronger and more suitable synthetics. Cotton threads are either soft, glazed or mercerized. Soft cotton thread receive no special treatment other than bleaching or dyeing and the application of a uniform low friction lubricant. Glace or unglazed cottons are produced from soft cottons that are consolidated then protected by application of a special surface coating of a starch or similar synthetic formulation which is then brushed as is dries. Mercerized threads are treated under tension in a solution of caustic soda which causes the fibers to swell and become rounder in cross section. This process enhances the luster of the thread and marginally increases the strength of the fibers, as well as improving the ability to absorb colors. General synthetic threads are produced from polyester or polyamide (nylon) fibers or filaments, either on their own or in combination with cotton, rayon or polyester fibers. All threads begin as a simple yarn. These basic yarns are manufactured by twisting together short fibers or fine continuous filaments. The thread is constructed by combining individual twisted yarns. The yarns are then twisted together to prevent the individual yarns from separating during sewing. The twist is defined as the number of turns inserted per inch (or per centimeter) of yarn or thread produced. Twist can be inserted in either direction and is an important property of the thread. A clockwise twist produces a “Z” twist (see sketch) which is also known as a left twist, and a counterclockwise produces an “S” twist know as right twist. Most machine impart a bit of “Z” twist to the thread as it goes through, and with “S” twist thread this would unravel the thread and cause separation and breakage: therefore most thread is given some “Z” twist and with the twist imparted by the action of the machine it reaches its equilibrium at the point of sewing. Almost all modern sewing machines require a “Z” twist and all or our stock is this type. Most thread is of two or three plies woven together, and corded threads are two or thread “plied” threads woven for even greater strength. At each level of weaving the twist must be reversed to produced a balanced thread. Clockwise produces a left or “Z” twist

Counterclockwise produces a right or “S” twist.

Physical Properties Cotton threads: Provide the best sewing performance, but are weaker than synthetics of equal thickness. Cottons are stable at higher, dry temperatures and are therefore less affected by hot needles in the sewing process. Synthetic (Nylon and Polyester): Generally processed to take wet washings at temperatures up to about 100°C (212°F) or dry cleaning temperatures up to 150°C (302°F) without shrinkage. Softening of these fibers begins at about 230°C (446°F) and melting begins to occur at about 260°C (500°F). Synthetic thread are not significantly affected by moisture, rot, mildew, insects or bacteria. Both nylon and polyester threads have exceptionally high tenacity (especially in continuous filament form) and also have high resistance to abrasion. Both possess good resistance to chemicals in general; nylon being more suitable where alkaline conditions apply while polyester is recommended for resistance to acids. Corespun threads: Use a strong polyester core with a cotton or spun poly outer core and receive the benefits of both worlds. The fiber wrap over the continuous filament core gives these threads a superior all round performance. The thread lubricant is carried well by the surface fibers and combined with the effects of air carried to the needle during sewing results in good performance. These threads are designed to maintain good loop formation even in multi-directional sewing.

310

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


THR

Thread

Notes

Thread Notes (continued) Know what you are comparing. It is important to understand how the numbers you use to buy your thread where obtained. The process of dying thread often involves bathing the thread dyes under extreme pressure and temperature. Thread are generally weaker after they are dyed. Be sure when comparing figures that they are based on the dyed end product, not the base goods. Threads tend to break at the loop in a seam, the break tests number, included for accuracy in our comparison here, is the single end break. Note that break strength is not the same as seam strength. Break strength is the force required to break a single strand while seam strength is the force required to break a length of stitches. For example, if you have 10 stitches per inch, the pressure required to split the seam will be much higher than for an individual loop. What thread should you use? Use the finest thread that will match the properties of the material being sewn and still give the strength required. Consider the stitch density: a close density stitch of monofil thread will give great strength, but would probably cut an upholstery vinyl in half. Increasing stitch density may increase the seam strength up to the point where the perforations from the needle compromises the strength of the fabric. If this happens, you should go to a stronger thread at a lower density, or if possible, a different type of stitch. As a rough guide, for general upholstery, you would want to use one of the following threads: Koban, 69 Nylon, Star Ultra Dee or Spun Poly. These all have a single end break strength of over 4.5 kg (10lbs.). The monofil threads are also an option, and though they never have a slightly lower break strength, they have tremendous elasticity and their transparency eliminates the need for color changes. Tenara and Sunguard thread are recommended for use in outdoor applications where UV resistance and exposure to the elements is a concern. The Spectrum, Epic and Dual Duty Koban Tex 24 threads all have break strengths in the 0.9-2.3 kg (2-5lbs.) range and are suitable for garment applications and workrooms. The chart below is a quick guide to threads. The thickness figure is for comparison only and is in a unit call a “Tex”, which is a direct count of weight per unit length, i.e. the larger the number the coarser the thread. It is provided as a scale of thickness only. The threads are listed from highest to lowest break strength. Name

Content

Thickness “Tex”

Break Strength lbs. kg

CSB 207 Hand Sewing Sunguard B138 Star Ultra Dee Sunguard B92 JEF80 Spun Polyester Dual Duty (Koban) 69 Nylon CSB138 JEF69 Nylon Ultra Dee DB138 Tenara Monofilament Size 10 #52 Monofilament Size 9 #40 Epic 50 Spectrum 50 Epic 100 Specturm 70 Dual Duty (Koban) Tex 24

100% Nylon 100% UVR Bonded Polyester 100% Bonded Polyester 100% UVR Bonded Polyester 100% Polyester Cotton Wrapped Polyester 100% Nylon 100% Bonded Nylon 100% Nylon 100% Bonded Polyester 100% Expanded PTFE (100%Teflon) 100% Nylon 100% Nylon 100% Polyester Corespun 100% Polyester 100% Polyester Corespun 100% Polyester Cotton Wrapped Polyester

210 135 90 90 80 120 70 70 70 135 90 58 44 40 40 27 27 24

35 21 14.2 14 12 11.5 11.5 11.5 10.5 9.8 8 5.8 5.7 4.5 3.5 2.7 2.5 2.2

15.8 9.5 6.4 6.3 5.4 5.2 5.2 5.2 4.8 4.5 3.6 2.6 2.5 2 1.6 1.2 1.1 1

Needle Size (US)

#11

#12

#13

#14

#15

#16

#17

#18

#19

#20

#21

#22

#23

Needle Size (Metric)

#75

#80

#85

#90

#95

#100

#105

#110

#120

#125

#130

#140

#160

Visit www.jennisfabrics.com

311


THR

Thread

Notes

Sewing Problems Some localized sewing difficulties will always occur and the following checklist may be helpful: Problem: Needle Thread Breakage Misaligned offwinding from thread package Trapping at package base Thread at package base Snarling before tension disc Excessive tension Sharp edges on throat plate, hook point, needle guard, bobbing case, needle groove or eye Thread fraying at needle Excessive needle heat; groove or eye blocked with melted fabric Hook overheating

Ensure overhead guide is directly above cop stand pin, at 2.5 times the height of thread package. Use foam pad or similar to prevent package tilting. Reduce thread stand height to prevent vibration and spillage. Use foam pad to prevent trapping after spillage. Can occur after thread breaks. Re-thread correctly. Increase wraps on pre-tension thread guides and reduce disc tension. Ensure discs are smooth. Use stronger thread or adjust tension. Polish rough edges, replace if necessary. Replace needle with one of better quality. Use finer thread or coarser needle. Improve fabric finish. Change to better needle, style and finish. Apply needle lubricant via thread. Use needle cooler, etc. Ensure adequate oil supply. Check needle to hook clearance.. Problem: Bobbin or Looper Thread Breakage

Badly wound thread on bobbin Tension too tight or bobbin over-turning Sharp edges on bobbin case or spring looper eyelet Bobbin case not fitting correctly

Adjust bobbin winder alignment Use prewound bobbins. Adjust bobbin case tension. Insert washer or spring to prevent over turning. Polish edges and contact surfaces. Check size/type of bobbin. Check for flange distortion. Problem: Thread fusing when machine stops

Poorly finished or incorrect thread Use better quality thread, change to corespun thread. Poorly or harshly finished densely woven fabric Improve fabric finish. Change to more suitable needles. Apply needle coolant. Damaged needle or needle overheated Change needle. Problem: Skipped Stitches Failure of hook, looper or needle to enter thread loops at correct time Thread loop failure due to incorrect needle size/style for thread size/type Thread loop failure due to incorrect setting of thread control mechanism causing thread loop starvation Flagging of fabric due to poor presser foot control or too large a throat plate hole Needle deflections or bent needle Poor thread loop formation

Check machine clearances and timings. Check needle is inserted and aligned correctly. Use needle with a deeper scarf. Change needle size/style.

Incorrect sewing tension Incorrect threading Needle thread snagging on bobbin case or positioning finger Variable tension due to poor thread lubrication.

Check for snarling, increase thread tensions Re-thread machine. Polish bobbin case surfaces. Reset positioning finger and opening finger if fitted (check with a strobe) Change to better quality thread.

Reset to standard and check loop formation with a strobe. Re-adjust presser foot pressure. Change the throat plate to match the needle. Use a reinforced needle, reset the needle guard. Replace the needle. Check with a strobe. Change to filament based corespun or locked filament polyester thread. Problem: Unbalanced - Variable stitching

Problem: Staggered Stitching Needle vibrating or deflecting Incorrect or blunt needle point Incorrect needle-to-thread size relationship Feed dog sway Poor fabric control, presser foot bounce

312

Increase needle size or change to a reinforced or tapered needle. Change the needle. Change needle or thread size as appropriate. Tighten dog feed. Reset presser foot. Change feed mechanism.

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


Visit www.jennisfabrics.com

#18

#18

#18

#18

#18

#18

#16

#18

#16

#18

Stamoid

Strataglass/ Super Clear

Sunbrella

Sunbrella Awning Stripes

Sunbrella Furniture Fabric

Top Gun

Ultraleather

PVC Mesh

#18

Phifertex & Plus

Sea Mark

#18

Odyssey III/ Soft Touch

Softside I & II

#18

Naugahyde

#16-18

Dacron (5.9 oz.)

#14

#16

Dacron (3.9 oz.)

No-See-Um Screen

#18

Cushion Underlining

#18

#20

Cotton Duck

Marine Topping

#18

Boat Top

#18

#16

Cargo Mesh

Headliner

#14

Bag/Flag Nylon

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

#16-22 X

#16-22 X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

Notes

#16-24

#16-22 X

#18-22

#20-24

#16-20

#18-24

#18-24

#16-19

#16-24

#16-24

#16-24 X

#16-20

#19-24

#19-22

#16-22

#18-22

#16-19

#22-25

#19-22

#19-22

X

X

X

X

X

X

X

X

X

X

X

X

X

#14-18 X

92 Mono 120 Needle 69 92 138 92 138 Tenara Mono 120 Tenara Dual Size Nylon Nylon Nylon Poly Poly Dual Duty Duty

Industrial Machine Needle Size and Thread

Thread

X

X

X

X

92 138 92 138 Needle 69 Size Nylon Nylon Nylon Poly Poly

Home Machine Needle Size and Thread

THR

Which Thread or Needle Do I Use?

313


THR

Thread

ST

Star Ultra Ultra Dee DB138 Poly White 8411

Ultra Dee DB138 Poly Black 8412

Ultra Dee DB138 Poly Olive Drab 8413r cilisi

• Price Breaks: Spool / 10 • Unit of measure: 1lb. ≈ 3000 yard/2733 m spool • Polyester thread with excellent resistance to UV rays, microorganisms, mildew, acids and other chemicals. Excellent sewability with less pucker, providing for optimum operator and sewing machine efficiencies. Resists moisture absorption and is a very good insulator against electrical charges. Colorfast and durable, dry cleanable. Bonding process applied to this thread provides excellent sewability in the tough to sew operations, resists abrasion from the needles and other external forces better than non bonded polyester.

Star Ultra Dee 92

• Price Breaks: Spool / 10 • Unit of measure: 1035 yards/946 m spool • 100% polyester thread with excellent resistance to UV rays, microorganisms, mildew, acids and other chemicals. Excellent sewability with less pucker, providing for optimum operator and sewing machine efficiencies. Resists moisture absorption and is a very good insulator against electrical charges. The break strength is approximately 14.2lbs. (6.43 kg).

Black White Pacific Blue Cadet Grey Jockey Red

8093 8095 8085 8086 8087

Toast Navy Forest Green Burgundy

8088 8089 8090 8097

Star Ultra Dee B92 • Price Breaks: Spool / 10 • Unit of measure: 8 oz. ≈ 2000 yard/1829 m spool • 100% polyester thread with excellent resistance to UV rays, microorganisms, mildew, acids and other chemicals. Excellent sewability with less pucker, providing for optimum operator and sewing machine efficiencies. Resists moisture absorption and is a very good insulator against electrical charges. The break strength is approximately 14.2lbs. (6.43 kg).

Jockey Red Cadet Grey Forest Green Black White 314

8098 8099 8100 8092 8094

Burgundy Navy Toast Pacific Blue

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS

8101 8102 8103 8096


THR

Thread

ST

Star Ultra

THR

Thread

KO

Koban

DB138 G-Type Bobbin Olive Drab 1388413 • Price Breaks: Each • Unit of measure: Box of 72 • This is a prewound bobbin of Ultra Dee DB138 bonded polyester thread. Fits a G-type bobbin holder as found on most heavy duty and industrial sewing machines. Approxiamately 25 yards/bobbin (22.9 m/bobbin).

Koban #25 Dual Duty

• Price Breaks: Spool / 10 • Unit of measure: 3000 yard/2743 m spool • An excellent multi-purpose sewing thread for general upholstery, leathers, vinyls canvasses, and knit goods. It consists of a filament core of polyester with a cover of cotton. The cotton protects the poly core from the weakening effects of needle heat while supplying the high level strength characteristic of a synthetic. There is no fusing, even at high machine speeds. It has excellent durability to repeated laundering, low shrinkage, and excellent abrasion resistance. The cotton retains the lubricant better than a polyester would without it, and the continuous filament core provides excellent loop forming characteristics through the needle. This is important when sewing heavy fabrics, as it helps prevent skip stitching. This is a superb all around sewing thread. The break strength is 11.5lbs. (5.2 kg). See color selection on page 435.

White Black Natural Olive Green Dark Green Grey Royal Blue Navy Blue

8117 8189 8190 8194 8195 8196 8197 8198

Red Brown Yellow Chestnut Light Brown Burgundy Light Grey

8199 8200 8381 8389 8393 8399 8401

Visit www.jennisfabrics.com

315


THR

Thread

KO

Koban

Koban Dual Duty Tex 24

• Price Breaks: Spool / 10 • Unit of measure: 6000 yard/5486 m spool • 2 ply twisted thread made from 35% cotton cover and 65% polyester core. The cotton protects the poly core from the weakening effects of needle heat while supplying the high level strength characteristics of a synthetic. There is no fusing, even at high machine speeds. It has excellent durability to repeated launderings, low shrinkage and excellent abrasion resistance. The cotton retains the lubricant better than a polyester would without it, and the continuous filament core provides excellent loop forming characteristics through the needle, which is important when sewing heavy fabrics, as it helps prevent skip stitching. This is a superb all around sewing thread. See color selection on page 435.

White Black Red Royal Navy Natural Beige

11314 11315 11316 11317 11318 11319 11320

Light Grey Smoke Sky Blue Slate Apple Red Steel Dove Grey

11321 11322 11323 11324 11325 11326 11327

Bobbin Types

G Type

0.865” (22 mm) O.D. 0.237” (6.02 mm) I.D.

316

M Type

0.990” (25.2 mm) O.D. 0.237” (6.02 mm) I.D.

0.39” (9.9 mm) min

0.415” (10.5 mm) min

0.415” (10.5 mm) max

0.440” (11.2 mm) max

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


69 Nylon

THR

Thread

69

69 Nylon

• Price Breaks: Spool / 10 • Unit of measure: 3000 yard/2743 m spool • 69 Nylon Thread is a 3 ply continuous multifilament synthetic bonded sewing thread made from 100% Type 6.6 DuPont bright nylon. It is known for it’s excellent sewability, high strength, resistance to abrasion and wear and its controlled stretch and recovery properties. 69 Nylon is unaffected by mildew or rot. This thread is finished with a combination of waxes, silicones and oils that are specially designed to facilitate the sewing operation. They provide consistent machine tensions and loop formation and afford protection from needle heat to ensure good sewability and to prevent the fusing of thread and fabric yarns. This treatment bonds the individual filaments and plies together and guards against abrasion and unraveling of threads during sewing. Melts at 252-260°C (480-500°F). Sticks at 229°C (445°F). See color selection on page 435.

Black Blue-Grey Bronze Brown 61 Brown 62 Burgundy Charcoal Dark Beige Dark Blue Dark Brown Dark Grey

Two Spool Thread Stand

8158 8366 8162 8177 8375 8169 8377 8173 8167 8178 8181

Deer Emerald Green Hunter Green Light Blue Light Brown Light Grey Mahogany Medium Brown Natural Off White

8172 8185 8359 8363 8174 8180 8179 8184 8171 8182

Olive Drab Orange Purple Red Royal Sand Sea Green Walnut Brown White Willow Green

8360 8161 8371 8170 8166 8175 8357 8176 8114 8163

TOO

Tools

MI

Miscellaneous

11800

• Price Breaks: Each • Unit of measure: Each • Two spool thread stand with screw type mounting base, eyes and platforms. High quality, adjustable height, similar to the design used on many OEM machines.

Visit www.jennisfabrics.com

317


THR

Thread

HA

Hand Sewing

CSB207 Hand Sewing White 8501

CSB207 Hand Sewing Black 8503

CSB207 Hand Sewing Chestnut 8533er cilisi

• Price Breaks: Spool / 10 • Unit of measure: ≈ 546 yard/500 m spool • This is 100% nylon hand sewing thread. Hand stitching is often used to finish seams of blind stitch and places heavy demands on a thread. This thread has both the strength and abrasion resistance required for hand sewing. It is very heavy to allow strong pulls and can be used with confidence. This thread will not break under strains of hand stitching. Break strength is 35lbs. (15.8 kg). This product is corded from 3 ply of 69 Nylon thread and Tex 210. See color selection on page 435.

THR

Thread

NY

Nylon CSB138 Nylon White

8403

CSB138 Nylon Black

• Price Breaks: Spool / 10 • Unit of measure: 1lb. ≈ 3000 yard/2750 m spool • 100% Continuous filament nylon with a bonded finish

318

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS

8404


69 Nylon G Type Bobbin White 8109

69 Nylon G Type Bobbin Black 8110

THR

Thread

69

Bobbins

THR

Thread

MO

Monofil

69 Nylon G Type Bobbin Olive 8111r

• Price Breaks: Each • Unit of measure: Box of 72 • There are pre-wound bobbins of #69 nylon thread. They are available in three colors to fit a G-Type bobbin holder as found on most heavy duty and industrial sewing machines. Break strength ≈ 11.5lbs. (5.2 kg). Each bobbin is approximately 30 yards (27.4 m). Set your bobbin in the picture to check if it is a G-Type size.

Monofilament Size 9 #40

8106

Monofilament Size 10 #52

8107

• Price Breaks: Spool / 17 • Unit of measure: Pound • This transparent thread is made from a single extruded filament of nylon (fishing line) to a specific diameter. Being transparent, there is no need to color match as the job changes. We carry this thread in 2 sizes. It is intended for high production use. It will not absorb lubrication, although being nylon is has a degree of self lubrication. It is often run through a foam pad with silicone or some similar lubricant. Break strength: #40: 5.7lbs. (2.6 kg), #52: 5.8lbs. (2.6 kg). #40: 0.0009” (0.023 mm) diameter, #52: 0.001” (0.03 mm) diameter. Spools average 1½ - 2lbs. • #8106 ≈ 12635 yard (11554 m), #8107 ≈ 10252 yard (9374 m) spool

Visit www.jennisfabrics.com

319


THR

Thread

PO

Polyester

#50 Spectrum Black 11701

#50 Spectrum Royal 11705

#50 Spectrum Off White 11713rer cilisi

#50 Spectrum White 11715

• Price Breaks: Spool / 10 • Unit of measure: 6000 yard/5484 m spool • Spectrum 50 is a 100% high tenacity premium spun polyester thread. An advanced low friction lubricated thread with consistent quality that provides exceptional sewing performance in high speed and critical sewing operations. Applications include uniforms, work wear, slacks, etc. An excellent apparel thread. Break strength is 3.5lbs. (1.6 kg). See color selection on page 436.

#70 Spectrum

• Price Breaks: Spool / 10 • Unit of measure: 6000 yard/5484 m spool • 100% high tenacity premium spun polyester thread. Advanced low friction lubricated thread with consistent quality that provides exceptional sewing performance in high speed and critical sewing operations. Primary applications include serging and edging. A lighter version of Spectrum 50. Excellent apparel thread for light and medium sewing applications such as sleepwear, dresses and fleece goods. Break strength is 2.5lbs. (1.1 kg).

Black Tan Camel Ruby Tone

320

11750 11751 11752 11753

Off White Beige White

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS

11762 11763 11764


JEF69 Nylon ½lb. Black

8461

• Price Breaks: #8461: Spool / 10 / 20

THR

Thread

66

JEF69 Nylon

JEF69 Nylon 1lb. Black

8470

#8470: Spool / 8 / 32

• Unit of measure: #8461: 8 oz. ≈ 3000 yard/2743 m spool #8470: 16 oz. ≈ 6000 yard/5486 m spool • J. Ennis Fabrics economical. 69 nylon thread. Great quality and fantastic price point. Can be used for a variety of sewing tasks including automotive, apparel, footwear, and upholstery. Excellent sewability, strength and resistance to wear and abrasion.

Spun Poly Black

8480

THR

Thread

80

JEF80 Spun Poly

Spun Poly Beige

8482

• Price Breaks: Spool / 20 • Unit of measure: 10900 yards/10000 m spool • J. Ennis Fabrics economical, upholstery weight, spun polyester thread. Excellent quality with a fantastic price. Looks, feels, and handles like cotton but with the strength of polyester. Breaking strength = 12lbs. Thickness: Tex 80.

Visit www.jennisfabrics.com

321


THR

Thread

EP

Epic #50 Epic Black

11731

#50 Epic White

11745

• Price Breaks: Spool / 10 • Unit of measure: 6000 yard/5484 m spool • This is a corespun thread, 65% polyester filament core and 35% spun polyester wrap. It has a high tenacity which gives consistent performance for all duty use in apparel such as uniforms, work wear and slacks. This thread has a break strength of 4.5lbs. (2 kg). Thickness: Tex 40.

Epic 100 White

8575

Epic 100 Antique Cream

8578

• Price Breaks: Spool / 10 • Unit of measure: 6000 yard/5484 m spool • Epic 100 is a 100% polyester thread intended to be used in the drapery and apparel industries. This premium quality thread outperforms all other 100% polyester threads. The core is Trevira high tenacity filament polyester. It contains specific new lubricants that allow use in the finest materials with no risk of staining. Break strength is 2.7lbs. (1.2 kg). Thickness: Tex 27.

COR

Cord

TW

Twine

#9 Nylon Tufting Twine

8125 • Price Breaks: Each / 10 • Unit of measure: 8 oz./226 g spool • Suitable for tying and tufting buttons. Excellent strength and resistant characteristics in a finer twine. White.

322

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


THR

Thread

SU

Sunguard

13822416 Sunguard UVR B138 16 oz. Nat/ White 13820116 Sunguard UVR B138 16 oz. Black • Price Breaks: Spool • Unit of measure: 16 oz. ≈ 3000 yard/2743 m spool • Twisted high quality UVR bonded polyester thread color matched to the most popular shades of acrylic fabrics and OEM automotive vinyls. These are the closest color match to Sunbrella® canvas colors. Sunguard® is UV resistant, anti-wick, mildew resistant with colorfast dyes and a breaking strength of 21lbs. (9.5 kg). Specifically designed for use in boat tops, automotive and awnings.

Sunguard B138 “G” Bobbin Nat/White 1382011

Sunguard B138 “G” Bobbin Black 1382241

• Price Breaks: Box • Unit of measure: Box of 72 • These are prewound bobbins of Sunguard B138 UVR bonded polyester thread. They are available in Natural/White and Black to fit G-type bobbin holders as found on heavy duty and industrial sewing machines. Each bobbin has approximately 17 yards (15.5 m) of thread.

Sunguard B138 “M” Bobbin Nat/White 1382012

Sunguard B138 “M” Bobbin Black 1382242

• Price Breaks: Box • Unit of measure: Box of 72 • These are prewound bobbins of Sunguard B138 UVR bonded polyester thread. They are available in Natural/White and Black to fit M-type bobbin holders as found on heavy duty and industrial sewing machines. Each bobbin has approximately 24 yards (21.9 m) of thread.

Visit www.jennisfabrics.com

323


THR

Thread

SU

Sunguard

Sunguard UVR B138 Bonded Poly 8 oz.

• Price Breaks: Spool • Unit of measure: 8 oz. ≈ 1500 yard/1371 m spool • Twisted high quality UVR bonded polyester thread color matched to the most popular shades of acrylic fabrics and OEM automotive vinyls. These are the closest color match to Sunbrella® canvas colors. Sunguard® is UV resistant, anti-wick, mildew resistant with colorfast dyes and a breaking strength of 21lbs. (9.5 kg). Specifically designed for use in boat tops, automotive and awnings. See color selection on page 436.

Bay Brown Beaver Beige Black Burgundy Cardinal Charcoal Dusk Blue

Sunguard UVR B92 16 oz. Nat/White 9220116

Sunguard UVR B92 16 oz. Black 9222416

138205 138229 138204 138224 138208 138207 138223 138215

Forest Green Natural/White Navy Ocean Green Pacific Blue Saddle Sand Shark Grey

138220 138201 138216 138218 138214 138231 138203 138222

Sunguard UVR B92 16 oz. Beaver 9222916rer cilisi

• Price Breaks: Spool • Unit of measure: 16 oz. ≈ 4600 yard/4206 m spool • Sunguard B92 is a 4 ply twisted high quality UVR bonded polyester thread. Color matched to the most popular shades of acrylic fabrics and OEM automotive vinyls. These are the closest color match to Sunbrella® canvas colors. Sunguard is UV resistant, anti-wick, mildew resistant with colorfast dyes and a breaking strength of 14lbs. (6.2 kg). Specifically designed for use in boat tops, automotive and awnings. See color selection on page 436.

324

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


Sunguard UVR Bonded Poly B92 8 oz.

THR

Thread

SU

Sunguard

• Price Breaks: Spool • Unit of measure: 8 oz. ≈ 1500 yard/1371 m spool • Sunguard B92 is a 4 ply twisted high quality UVR bonded polyester thread. Color matched to the most popular shades of acrylic fabrics and OEM automotive vinyls. These are the closest color match to Sunbrella® canvas colors. Sunguard is UV resistant, anti-wick, mildew resistant with colorfast dyes and a breaking strength of 14lbs. (6.2 kg). Specifically designed for use in boat tops, automotive and awnings. See color selection on page 436.

Adriatic Blue Bay Brown Beaver Beige Black Black Cherry Blue Wave Burgundy Cardinal Charcoal Concord Dark Olive Dark Rose Dark Teal Dusk Blue Forest Green Graphite

92232 92205 92229 92204 92224 92209 92213 92208 92207 92223 92255 92228 92210 92217 92215 92220 92236

Mediterranean Medium Opal Medium Titanium Mocha Navy Ocean Green Oyster Pacific Blue Pearl Grey Saddle Sand Shamrock Shark Grey Sunflower Sunglow Taupe White

922012 Sunguard B92 “M” Bobbin Nat/White

92225 92235 92234 92230 92216 92218 92202 92214 92221 92231 92203 92219 92222 92212 92206 92227 92201

Sunguard B92 “M” Black

922242

• Price Breaks: Box • Unit of measure: Box of 72 • These are prewound bobbins of Sunguard B92 UVR bonded polyester thread. Available in Natural/White and Black to fit M-type bobbin holders as found on heavy duty and industrial sewing machines. Each bobbin has approximately 36 yards (32.9 m) of thread.

Visit www.jennisfabrics.com

325


THR

Thread

SU

Sunguard Sunguard B92 “G” Bobbin Nat/White 922011

Sunguard B92 “G” Black

922241

• Price Breaks: Box • Unit of measure: Box of 72 • These are prewound bobbins of Sunguard B92 UVR bonded polyester thread. Available in Natural/White and Black to fit G-type bobbin holders as found on heavy duty and industrial sewing machines. Each bobbin has approximately 25 yards (22.8 m) of thread.

THR

Thread

TE

Tenara® (Gore-Tex) Gore-Tex® Tenara® 1400 (92)

• Price Breaks: Spool • Unit of measure: 1900 yard/1737 m spool • Remarkable thread manufactured from 100% expanded PTFE fiber (commonly know as Teflon®). Will not deteriorate from exposure to the elements, immune to UV degradation, retaining original breaking strength longer than many acrylic, polyester and cotton/ poly threads, unaffected by temperature extremes and is chemically inert. Ideal choice for outdoor fabric products such as awning and marine canvas. Pre-lubricated for a cooler running needle enabling sewing at higher speeds. Break strength is 8lbs. (3.6 kg).

White Black Clear 326

8416 8417 8418

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


TIE

Tie Downs

RA

Ratchets

Webbing Accessories for the Trucking & RV Industries Use the ratchets and hooks pictured here along with the special tie down webbings listed on page 331 to create custom tie downs for trucking, RV hauling or anywhere cargo needs to be strapped down. Match the capacity of the hardware to that of the webbing to get a strong combination. The break strength figures listed do not indicate load capacity, these are the figures which the unit failed under testing. The breaking strength of the weakest component in the tie down should be more than 3x the weight of the cargo being restrained. Webbing being used over abrasive or sharp edges must be protected, otherwise normal motion in transit can weaken the webbing by abrading or cutting into it. Worn, frayed or otherwise damaged webbing should be replaced immediately.

1” Tie Down Ratchet

2” Tie Down Ratchet

9506

9504

2” Tie Down Ratchet Long Handled 9502rer cilisi

4” Tie Down Ratchet 9498

• Price Breaks: Each / 5

• Price Breaks: Each / 5

• Price Breaks: Each / 5

• Price Breaks: Each / 5

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

• 1” (2.5 cm) tie down ratchet. Capacity ≈ 3300lbs. (1500 kg).

• 2” (5.2 cm) tie down ratchet. Capacity≈11000lbs. (5000kg).

• 2” (5.1 cm), longer handle for greater leverage when applying pressure along webbing. Capacity≈11000lbs. (5000kg).

• Heavy duty ratchet for use with the widest webbing at 4” (10.2 cm). Break strength ≈22000lbs. (10000 kg).

Visit www.jennisfabrics.com

327


TIE

Tie Downs

HO

Hooks

¼” Rope Tie Down Rachet

13003 • Price Breaks: Each / 25 / 50 • Unit of measure: Each • Rope tie down ratchet with rubber tipped hooks for use with ¼” rope. It is compact and easy to use. This ratchet is made specifically for outdoor marine use, but can be used many other places as well. Just tug on the rope until it’s tight and secure the remaining rope. To release, pull on the rope the same way as when tightening and release the trigger release.

Lil’ Weggie Tarp Clamp

9499 • Price Breaks: Pair / 20 • Unit of measure: Pair • The Lil Weggie clamping device is designed to hold tarps or other materials that are secured by bungee cords, straps or hand tied ropes. The Lil Weggie is designed for give or take and the movement of the tarp. It has a spring loaded, thumb operated locking device that keeps it secure until released. It is not designed to hold, tie down or secure loads or cargo and should be limited to no more than 45lbs. (20.4 kg) of load.

1” Steel Tie Down Hook

9510

2” Steel Tie Down Hook

9508

• Price Breaks: Each / 25 • Unit of measure: Each • Steel wire hook with 1” (2.54 cm) or heavy grade 2” (5.1 cm) eye. Load capacity: #9510: 3300lbs. (1500 kg), #9508: 11023lbs. (5000 kg).

328

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


2” Flat Tie Down Hook

9514

TIE

Tie Downs

HO

Hooks

4” Flat Tie Down Hook

9516

• Price Breaks: Each / 25 • Unit of measure: Each • 100% steel construction. 2” (5.1 cm) or 4” (10.2 cm) flat tie down hook. Measurements: #9514: 2.5” (6.4 cm) width, 2” (5.1 cm) eye. Load capacity ≈ 11023lbs. (5000 kg), #9516: 3¾” (9.5 cm) width, 2¾” (7 cm) eye. Load capacity ≈ 14330lbs. (6500 kg).

2” Tie Down Triangle 9490

3” Tie Down Triangle 9491

4” Tie Down Triangle 9492er cilisi

• Price Breaks: Each / 25 • Unit of measure: Each • Cast unit for joining multiple straps. Not adjustable by itself. Break strength: #9490: 11020lbs. (4999 kg), #9491: 15400lbs. (6985 kg), #9492: 19842lbs. (9000 kg).

1” Cam Buckle Steel 9494

1” Black Cam Buckle Steel 9495

2” Cam Buckle Steel 9496er cilisi

• Price Breaks: Each / 25 / 100

• Price Breaks: Each / 25 / 100

• Price Breaks: Each / 25 / 100

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

• Aluminum press plate with one piece steel frame body. Easy to operate. Break strength: 1102lbs. (500 kg).

• Aluminum press plate with one piece steel frame body. Gloss black finish. Break strength: 1102lbs. (500 kg).

• Aluminum press plate with one piece steel frame body. Easy to operate. Break strength: 2000lbs. (900 kg).

Visit www.jennisfabrics.com

329


TIE

Tie Downs

HO

Hooks

1” S-Hook PVC Coated

9497 • Price Breaks: Each / 25 / 100 • Unit of measure: Each • For use with the 1” (2.5 cm) webbing. Break strength: 2000lbs. (900 kg).

9479

S-Hook for Rubber Tarp Straps

• Price Breaks: Package / 10 • Unit of measure: Package of 100 • Replacement S-hook for rubber tarp straps listed below.

9” Rubber Tarp Strap 9480

15” Rubber Tarp Strap 9482

21” Rubber Tarp Strap 9484rer cilisi

31” Rubber Tarp Strap 9486

• Price Breaks: Each / 25 / 100 • Unit of measure: Each • These straps are manufactured from EPDM ethylene-propylene synthetic rubber, which has all the strength characteristics of natural rubber, but better resistance to some aggressive chemicals and better exposure characteristics. The characteristics of the material include an elongation limit of 150% and stretch recovery of 94% base on keeping stretch for 10 days. The pulling force (break point) varies with length: #9480: 900lbs. (407 kg), #9482: 700lbs. (317 kg), #9484: 600lbs. (272 kg), #9486: 700lbs. (317 kg).

330

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


1” Polyester Tie Down Webbing 9701

2” Polyester Tie Down Webbing 9702

3” Polyester Tie Down Webbing 9703lorer cilisi

WEB

Webbing

PO

Polyester 4” Polyester Tie Down Webbing 9704

• Price Breaks: Roll / 5 / 10 • Unit of measure: 10 yard (9 m) roll • Tough polyester webbing to go with the webbing hardware previously listed.

2” Tie Down Webbing 9706

3” Tie Down Webbing 9707

4” Tie Down Webbing 9708er cilisi

• Price Breaks: Roll • Unit of measure: 100 yard (92 m) roll • Tough polyester webbing to go with the webbing hardware previously listed.

See our Webbings section for more webbings on page 400.

Visit www.jennisfabrics.com

331


TOO

Tools

AU

Automotive

Tools All of the tools J. Ennis Fabrics carries are listed in this section. Due to the amount of tools, this section is listed in alphabetical order by part set. While the part set is used to group the same primary function together, many tools have more than one use. This may cause confusion as to where a tool may be located. For example, while hog rings and pliers are a necessity in automotive, hog rings are located in a section of their own under TOOHO. Remember, many tools have more than one use, please keep that in mind while you are looking through this index.

#746 Flexible Tucking Tool

8420 • Price Breaks: Each • Unit of measure: Each • A sturdy tool with a slightly curved blade and rounded corners for tucking headlining and upholstery around windows, doors and other interior automotive trim. Comfortable wooden handle with eyelet gives you excellent leverage.

Trim Pad Tool

8450 • Price Breaks: Each • Unit of measure: Each • The first tool designed specially to remove trim pad plastic and metal fasteners without damage to the car finish. This tool reaches under the trim panels. It supports and grips the plastic fastener and then lifts without damage to the fastener or the trim pad backing. It is long enough to reach the most recessed fastener and pries only against hidden surfaces to eliminate the danger of scratching the paint. Carefully beveled and deburred, and manufactured from high carbon steel. While specially designed to allow the re-use of plastic fasteners on GM cars, it works well in all metal fasteners.

332

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


25’ Self Storing AIr Hose

TOO

Tools

CO

Compressor

3131

• Price Breaks: Each • Unit of measure: Each • ¼” (6 mm) air line in a plastic hose format with built in coil that will cause it to pull back out of the way when not in use. It comes complete with couplers and is ready to use.

CP 37 Connector

3137

CP 38 Connector

3138

• Price Breaks: Each / 5 • Unit of measure: Each • #3137 is a male threaded end that fits into accessories such as dusting guns, etc. for attaching to hoses. #3138 is a female threaded end that accepts hoses then clips into couplers.

C 37 Coupler

3141

C 38 Coupler

3142

• Price Breaks: Each / 5 • Unit of measure: Each • #3141 is a coupler with a male thread end that will attach to compressors to accept the fittings on the end of hoses. #3142 is a coupler with a female end that will accept the threaded end of hoses and allows the use of quick disconnect fitting equipped tools.

Visit www.jennisfabrics.com

333


TOO

Tools

CR

Cruiser #1 Plain Grommet Hand Setting Die 6145

#2 Plain Grommet Hand Setting Die 6147

#3 Plain Grommet Hand Setting Die 6149orer cilisi

• Price Breaks: Each • Unit of measure: Each • Hand setting tools for the Cruiser brand plain grommets. Each set consists of two parts, the punch and the die. Note that the spur and the plain dies are not interchangeable. You must have the specified die for each type.

#1 Spur Grommet Hand Setting Die 6155

#2 Spur Grommet Hand Setting Die 6157

#3 Spur Grommet Hand Setting Die 6159orer cilisi

• Price Breaks: Each • Unit of measure: Each • Grommet setting tools for the Cruiser brand grommets. These require a special die as setting the teeth on the spur washer uses a slightly different size and die face from the plain.

334

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


Heavy Duty Hot Knife

TOO

Tools

CU

Cutters

2810

• Price Breaks: Each • Unit of measure: Each • Hot knife cutter for use on vinyls, plastic, tarp materials, etc. Can also be used for cutting and sealing webbings. Runs on normal house AC current (60 watts). This unit heat up to 565°C (1050°F). It is hot enough for heavy duty work. Use the Dial-Temp controller shown below to lower the temperature of the knife for applications that require a lower heat setting.

Hot Knife Tip

Stand for Hot Knife

2815

2816

Dial Temperature Controller 2817er cilisi

• Price Breaks: Each

• Price Breaks: Each

• Price Breaks: Each

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

• Standard hot knife tip, used with #2810 Hot Knife.

• Wire stand for hot knife. Prevents burn marks in surfaces.

• Simple temperature control for #2810. Plug into a normal wall socket, and you can adjust the blade temperature.

HSGO Hot Knife

2830

• Price Breaks: Each • Unit of measure: Each • The small point Type HSGO is primarily used in separating thin materials and for cutting round or irregular shapes. The blade take 6-8 seconds to heat up. The heat can be approximately controlled using the on/off switch. This small, convenient cutter is suited for work such as pattern making, cutting out awnings, filter cloths, sail materials and other fabrics, as well as for cutting and welding synthetic cords and ropes. • Note: HGSO is designed for intermittent use and should not be used for periods longer than 20 minutes without a pause for cooling. 70 watt capacity heater runs on standard household current. Weight: 2.2lbs. (1 kg). There are different blades configurations available, this part does not include a blade or tip. See next page for blades.

Visit www.jennisfabrics.com

335


TOO

Tools

CU

Cutters

Blades for HSGO Knife 2835

RS Cutting Blade for HSGO 2837

SF Cutting Foot for RS Blade 2839rer cilisi

• Price Breaks: Each

• Price Breaks: Each

• Price Breaks: Each

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

• Standard cutting tip for the HSGO Hot Knife. Should be used on a heat proof surface.

• Curved cutting blade. Can be used with #2839 to be able to cut and seal synthetic materials in one step.

• Used with the RS cutting tip, allowing cutting and sealing without a cutting base.

Mistee 2” Round Knife Cutter

3160 • Price Breaks: Each • Unit of measure: Each • Powerful, light hand cutter • This small and light cutter features a high torque motor to give it more power than any other hand held cutter of its size, allowing it to cut the heaviest material with ease. It has a squeeze type switch and a comfortable grip to lessen operator fatigue, complete with a push button sharpener. The heptagon blade rotates against a carbide tipper counter knife with a scissor action that prevents fabric from slipping and ensures clean cuts on all fabrics. It will cut intricate curves without a snag, synthetics without fusing, single ply and slippery materials without pulling or distorting. Specification include: 40 watt capacity, (short time rating), 2.5” (6.4 cm) blade, ¼” (6 mm) cutting capacity.

Carbon Brush for Mistee Cutter 3167

Hex Blade for 2” Cutter 3164

• Price Breaks: Each

• Price Breaks: Each

• Price Breaks: Each

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

• Sold individually but should always be replaced as a pair.

336

Round Blade for 2” Cutter 3166er cilisi

• Works well with very thin or light fabrics.

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


Mistee 3½” Round Knife Cutter

TOO

Tools

CU

Cutters

3162

• Price Breaks: Each • Unit of measure: Each • This lightweight 4lbs. (1.8 kg) cutter has a strong motor that pulls 80 watts capacity (twice that of the Mistee 2” cutter). It cuts all types of fabrics single or in multiple plies. Built in sharpener and finger guard keep this machine efficient and safe. It has smooth rollers on the base for effortless gliding while cutting. It will cut up to ¾” (2 cm) of fabric at one time. Perfect for the smaller shop doing repetitive contract work. Replacement blades available.

Replacement Blade for Mistee 3½” 3163

• Price Breaks: Each • Unit of measure: Each • For use with the #3162 Mistee 3½”.

Worm Gear for Mistee 3½”

3168

• Price Breaks: Each • Unit of measure: Each • Worm gear for #3162 Mistee 3½” round knife cutter.

Visit www.jennisfabrics.com

337


TOO

Tools

CU

Cutters

9” Acu-Cutter Queen Foam Cutter 4338 • Price Breaks: Each • Unit of measure: Each • Affordable, efficient 9” foam cutter • This is the ideal foam cutter for the smaller shop. It cuts with two blades: one oscillating and one stationary. It has a 9” (22.9 cm) stanchion as standard and the blade and guide are included with the unit. The heavy duty free standing base is 4” (10.2 cm) wide and 6¾” (17 cm) long and mounted on glide bearings to reduce drag. • Note: While this unit is an outstanding value, it is not intended for a production line where foam cutting is the only job. If you are cutting a large volume of foam, the Bosch unit is your best choice.

Replacement Blade for 9” Acu-Cutter 4336 • Price Breaks: Each • Unit of measure: Each • For use with the 9” Acu-Cutter foam cutter #4338.

Bosch Foam Cutter Motor Unit

4343 • Price Breaks: Each • Unit of measure: Each • World renown Bosch quality • This is the Bosch model 1575 foam rubber cutter unit. It is a heavy duty, fast oscillating unit that employs two moving blades within a narrow, tapered guide to cut foam quickly and easily. The blade and guide combinations, which must be ordered separately, are available in 8” (20.3 cm) or 12” (30.5 cm) combinations. Changing blades requires no tools, it will cut all types of foam and carpeting, and has a slim motor housing for a more comfortable grip. It is double insulated, UL listed and complies to OSHA regulations. It weighs 3.5lbs. (1.6 kg), is 9¼” (23.5 cm) long, and runs at a no load speed of 3200 strokes/minute. The base has rollers for minimum rolling resistance.

338

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


8” Blade for Bosch Cutter 4344

8” Guide for Bosch Cutter 4346

12” Blade for Bosch Cutter 4345olorer cilisi

TOO

Tools

CU

Cutters 12” Guide for Bosch Cutter 4347

• Price Breaks: Set

• Price Breaks: Each

• Price Breaks: Set

• Price Breaks: Each

• Unit of measure: Set of blades

• Unit of measure: Each

• Unit of measure: Set of blades

• Unit of measure: Each

410 U-Cut Foam Cutter

4341

• Price Breaks: Each • Unit of measure: Each • Large sheet foam cutter. This versatile cutter will cut as fine as ¼” (6 mm) to a maximum thickness of 9” (22.0 cm) and up to a width of 36” (91.4 cm) with unlimited length. It allows you to glue salvageable pieces together and maximize waste. When assembled, the arms must be slightly compressed, the hold the blade secure under tension. Best results are obtained by working on a smooth surface. Hold the material in place with a piece of plywood, either by hand or with a weight. Supply enough pressure to prevent the foam from moving, but not enough to compress it so it will expand again after cutting. If a sheet of plywood is not used, the cut is likely to be uneven. When starting the cut it will be easier to angle into one corner first, rather than trying to start the cut across the whole face. Replacement blades are available.

410 U-Cut Replacement Blade

4342

• Price Breaks: Each • Unit of measure: Each • Replacement blades for the 40 foam cutter. Normally, these blades are very long lived, as they are cutting through softer substances. However, should a blade be damaged or worn, simply order this part. Easy installation.

Visit www.jennisfabrics.com

339


TOO

Tools

CU

Cutters

337 Wire Cutters

8014 • Price Breaks: Each • Unit of measure: Each • The fastest way to get rid of the original hog rings is to cut them off and remove the pieces. This tool will cut through hog rings easily and is useful for all lighter gauges of wire. This versatile tool has non-slip handles and a hardened cutting surface.

9876

Compact Hot Cutter

• Price Breaks: Each • Unit of measure: Each • Compact portable hot cutter heats quickly for use in cutting and sealing edges on any synthetic webbing or cord. Perfect for drawstrings, laces, tapes, cords and ropes. Actual size is 3” (7.6 cm) high, 4” (10.2 cm) wide and 5” (12.7 cm) long. This versatile unit will add a professional edge to all the cut webbings and synthetic ropes you use. The blade is replaceable.

Production Hot Cutter

9877 • Price Breaks: Each • Unit of measure: Each • This unit was designed for custom hand cutting or high speed production use. Lever type action is fast, and neatly cuts and seals all synthetic materials such as webbings, cords, etc. No further processing needed. It can be used to rim narrow fabric strips. It has a 3½” (8.9 cm) maximum cut width, and is variable heat controlled. The standard model runs on normal 110 household current, but 220 volt models are available on special order. The blade can be replaced separately.

340

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


Blade for # 9876 Compact Hot Cutter 9816

4” Replacement Element for #9877 9814

TOO

Tools

CU

Cutters

4” Replacement Blade for #9877 9813olorer cilisi

• Price Breaks: Each

• Price Breaks: Each

• Price Breaks: Set

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

• Replacement blade for #9876.

• Replacement element for the Production Hot Cutter.

• Replacement blade for the Production Hot Cutter.

Top-Snapper

TOO

Tools

FA

Fasteners

4038

• Price Breaks: Each / 10 • Unit of measure: Each • Ergonomic grip, securely grasps the snap to allow you improved leverage and strength in placing the snap or removing it. Stainless steel blades. This tool has two blades, a long blade that is suitable for use from inside, and a short blade that works well on the outside. The notch fits over the snap and enables you to remove or place it easily. Reduces the chance of canvas tears and eases the fastening of your boat canvas or tonneaus.

Visit www.jennisfabrics.com

341


TOO

Tools

FA

Fasteners Steel Hole Punch for Turn Fasteners 3128 • Price Breaks: Each • Unit of measure: Each • Steel punch for the nylon common sense eyelet and washer turn fasteners. Toughened for long life. As with all other punches it is recommended that this unit be driven with a mallet rather than a steel hammer, which will shorten its life.

#450 Common Sense Hand Cutter

3111

• Price Breaks: Each • Unit of measure: Each • Punch designed to cut the oval hole and prong openings required for setting the standard metal common sense eyelet into fabric. A soft surface must be underneath the fabric being punched as the steel pins can scratch the casting. See fasteners starting on page 124.

#171 Common Sense Hand Cutter

3113

• Price Breaks: Each • Unit of measure: Each • 2 prong all steel cutter for the standard metal common sense clinch plate fastener.

342

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


Common Sense E-Z Hand Cutter

TOO

Tools

FA

Fasteners

3117

• Price Breaks: Each • Unit of measure: Each • Quick, versatile and portable hand tool for punching holes for the eyelet washer element of the standard metal common sense fastener system (see page 124 for fasteners). Requires no punches or cutting boards. A quick squeeze of the plier handles and you are ready to set the fastener.

Anvil Die for Eyelet 4023

Anvil Die for Button 4024

Dura Snap Setting Punch 4022er cilisi

/8” Dura Snap Hole Punch 4025 1

• Price Breaks: Each

• Price Breaks: Each

• Price Breaks: Each

• Price Breaks: Each

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure:: Each

• Unit of measure: Each

• Allows you to set Dura Snap and Dot Durable fasteners into any material. Use with #4022 and #4025.

• Allows you to set Dura Snap and Dot Durable fasteners into any material. Use with #4022 and #4025.

• To set Dura Snap and Dot® Durable fasteners into any material. Set dies anywhere you can reach.

• To set Dura Snap and Dot® Durable fasteners into any material. Set dies anywhere you can reach.

PM-1Dura Snap Machine

4030

• Price Breaks: Each • Unit of measure: Each • For high production with less fatigue, we offer the PM-1 Dura Snap bench mounted press. Sturdy unit sets snaps quickly and easily with a single stroke. Includes a complete set of dies for Dot® Durable and Dura Snap fasteners. This machine must be bolted to the workbench. It is not portable and has a tendency to crack if not solidly mounted.

Visit www.jennisfabrics.com

343


TOO

Tools

FA

Fasteners Replacement Dies for PM-1/PM-5 4026

Baby Dura Snap Die Set for PM-1 4036

• Price Breaks: Set • Unit of measure: Set of 4 • The replacement set of 4 dies for Dura Snap fasteners for the bench press PM-1 machine are available by themselves or “baby” size.

Lift-a-Dot Punch

4016 • Price Breaks: Each • Unit of measure: Each • All steel punch specially created for setting in the #4011 Lift-the-Dot fastener. See page 141 for the full line of Lift-the-Dot fasteners and parts. As with all punches, we recommend using a mallet rather than a metal hammer to drive this too.

Lift-a-Dot E-Z Hand Cutter

3115 • Price Breaks: Each • Unit of measure: Each • Use this hand tool to set Lift-the-Dot fastener eyelets and clinch plates. 1⅞” (4.8 cm) deep throat, finger guard and plastic coated handles make this tool easy and safe to use. Heavy construction. This unit is essential to those doing classic foreign convertible tops.

344

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


TOO

Tools

FA

Fasteners

Press-n-Snap Hand Tool 4029 • Price Breaks: Each • Unit of measure: Each • Plier Style Setting Die for Dura Snap • This lightweight aluminum tool sets snaps into place with a simple squeeze. Ideal for tarping, convertible top, tents, boat covers and canvas jobs. Each unit comes complete with setting dies for regular durable and Dura Snap type fasteners. A rubber ring holds one part of the fastener, for one handed operation. Dies are also available for Baby Dot® fasteners. It is also possible to replace the rubber ring separately.

Regular Dura Snap Dies

4027

Baby Dura Snap Dies

4034

• Price Breaks: Each • Unit of measure: Set of 4 • Replace worn or lost dies, or stock a set of dies to use with the Baby Dura Snap system of slightly smaller durable snap fasteners. Set of 4 dies. For use with the Press-n-Snap hand tool.

Rubber Ring for Press-n-Snap

4028

• Price Breaks: Each • Unit of measure: Each • The rubber rim that holds one half of the fastener into the top die of the Press-n-Snap can wear out with time. Keep a replacement on hand.

Visit www.jennisfabrics.com

345


TOO

Tools

FA

Fasteners Press-n-Snap Die for Pull-the-Dot 4032 • Price Breaks: Each • Unit of measure: Each • The Press-n-Snap line has proven so versatile, we have expanded the range of dies available, making it a better value than ever. Use one tool to set all types of fasteners.

Press-n-Snap Dies for Osborne Grommets

• Price Breaks: Set • Unit of measure: Set of two

#00 Osborne #0 Osborne #1 Osborne

Stayput Spincut ¼”

4120 4121 4122

#2 Osborne #0 Spur Osborne #1 Spur Osborne

4123 4124 4125

1702 • Price Breaks: Each • Unit of measure: Each • No need to have a hammer, die and block of wood to create holes in fabrics and webbings. Simply insert the Stayput Spin Cut tool into a power drill and hold the nylon cutting board behind the fabric. Activate the drill and gently push into the fabric, the tool does all the work in creating a clean, neat hole.

346

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


StayPut Keder Bullet Drill Guide 11 mm 1714

TOO

Tools

FA

Fasteners

StayPut Keder Bullet Drill Guide 13 mm 1715

• Price Breaks: Each • Unit of measure: Each • Drill guide to use with keder bullet and keder welting. Holds the keder welting in place for more accurate and safer drilling of the pilot hole for the keder bullet. 100% steel.

StayPut Spincut 3/8” Hole Kit 1716

StayPut Spincut 7/16” Hole Kit 1717

• Price Breaks: Each • Unit of measure: Each • The Stayput Spin Cut is designed to simplify making holes in fabric. Consists of the Spin Cut tool and the nylon (HDPE) cutting board. No need to have a hammer, die and block of wood to create holes in fabrics and webbings. Simply insert the Stayput Spin Cut tool into a power drill and hold the nylon cutting board behind the fabric. Activate the drill and gently push into the fabric, the tool does all the work in creating a clean, neat hole.

Visit www.jennisfabrics.com

347


TOO

Tools

FO

Folders

Folder for ¾” Bindings 4890

Folder for ⁷⁄₈” Bindings 4892

Folder for 1” Bindings 4897orer cilisi

Folder for 1¼” Bindings 4895

• Price Breaks: Each • Unit of measure: Each • Sew Binding 4x Faster • Stitch bindings into place faster and straighter with these adapters. Simply screw the binding folder into place, then guide the material and binding through the machine. Makes a difficult job easier, faster and gives uniform, factory quality seam for that professional fitted appearance.

TOO

Tools

GR

Grommets

Punch Tool 40 mm

50095 • Price Breaks: Each • Unit of measure: Each • 40 mm Punch Tool for cutting clean holes for mounting drapery grommets. By using a drill, the spinning action cuts a clean hole with less effort and is much more versatile. Can be used on site.

348

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


#621 Vent Die

TOO

Tools

GR

Grommets

9022

• Price Breaks: Each • Unit of measure: Each • This special die quickly sets #9021 ventilators. Merely punch your hole, set the ventilator with the neck up on the base, and then slip the fabric in place. A few even taps with a mallet will set the vent.

Hole Cutting Pad

6120

• Price Breaks: Each • Unit of measure: Each • Extend Cutter Life • Get the full distance from your cutters by using this pad under the material you are punching. The special surface absorbs the impact and allows the cutter to cut the material, not the bench underneath. Cutters stay sharper and last longer. For maximum life of your cutters and die setting equipment, always use a rubber mallet and not a steel hammer to set fasteners, grommets or to hole punch. Approximately 10” x 10” x 5/16” thick (25.4 x 25.4 x 0.8 cm)

Grommet Fabric Hole Cutter

50820

• Price Breaks: Each • Unit of measure: Each • Tool is used as any punch. A mallet is recommended for striking the punch and a soft surface under the material will prevent the hardened steel cutter from damage and premature dulling. #6120 hole cutting pad is strongly recommended and will maximize the life of the punch. Holes size: 19/16”

Visit www.jennisfabrics.com

349


TOO

Tools

GR

Grommets

Manual Grommet Kit w/ Die 50823 • Price Breaks: Each • Unit of measure: Each • Content: Steel.

Hand Press Kit and Die

50826 • Price Breaks: Each • Unit of measure: Each • Special order only: not stocked.

Hand Press Die Sets

50829 • Price Breaks: Each • Unit of measure: Each • The part that fits into the hand press is ½” long and ⅝” diameter.

350

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


Hot Air Heat Gun

TOO

Tools

GU

Guns (Heat)

5151

• Price Breaks: Each • Unit of measure: Each • Hot air guns have become essential tools for anyone working with vinyls and complex shapes often found in automotive trimming. For softening vinyls to impart stretch, softening floor tiles, carpet backing, etc. Weighs only 2.75lbs. (1.2 kg), including stand, and capable of generating temperatures between 232-343°C (450-650°F). Draws 12.5 amps of regular household 110 volt current. Adjustable air intake regulator provides variable temperatures. Double jacketed nozzle and shield keeps external temperatures down. Unique suspended quick change heating element for easy replacement, and replaceable brushes to extend the life of the unit. Housing, stand and handle are G.E. Lexan® for superior electrical insulation and impact resistance. Toggle style switch has three settings: hot, cold and off, allowing to be used as blower and heater. Nozzle air opening: 13/16” (3 cm) diameter. For smoothing wrinkles, drying moisture, softening anything from vinyl to floor tiles, get the job done quickly and safely.

Replacement Element for EP-5C

5154

• Price Breaks: Each • Unit of measure: Each • There have been slight model changes to the hot air heat gun over the years. Please quote your model number when ordering a replacement element to ensure that you receive the correct one.

160 or 33 Magnet Hammer

TOO

Tools

HA

Hammers

5101

• Price Breaks: Each / 6 • Unit of measure: Each • A specially balanced tack hammer with solid head of bright bronze on a hickory handle. One end with a permanent magnet for picking up tacks, the other tipped with steel for driving the tacks home. The head is 5½” (14 cm) long, and the magnetic face is ¼” (6 mm), while the steel tipped end is ½” (1.3 cm) in diameter. The weight of the head is 7 oz. (198 g).

Visit www.jennisfabrics.com

351


TOO

Tools

HO

Hog Rings

#23 Straight Hog Ring Pliers 8005

#2360 Angle Hog Ring Pliers 8006

XX Straight Hog Ring Pliers 8002olorer cilisi

XXL Angle Hog Ring Pliers 8003

• Price Breaks: Each

• Price Breaks: Each

• Price Breaks: Each

• Price Breaks: Each

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

• Forged steel pliers with special jaws to hold and cleanly crimp hog rings.

• Same design as #8005 with spring loaded jaws, but with an angled head to allow blind clamping.

• For all hog rings up to 1½” (2.5 cm), case hardened with heavy nickel plating, and non-slip plastic handles.

• Similar to #8002 but with an angled head to allow blind clamping.

L Right Angle Hog Ring Pliers

8004 • Price Breaks: Each • Unit of measure: Each • These pliers allow crimping in awkward spots with their angled nose. A strong elastic holds the hog ring securely while you position it, then a quick squeeze completes the task. Nickel plated case hardened steel for long life.

352

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


B1 Upholstery Repair Kit

TOO

Tools

KI

Kits

TOO

Tools

KN

Knives

8061

• Price Breaks: Each • Unit of measure: Each • This upholstery kit is intended for the beginner. It is ideal as a starting point for upholstery classes or as a retail item on the countertop of your shop or store. It includes an instruction book to cover the basics of a beginner’s project. Each kit contains: 1 magnetic hammer, 1 webbing stretcher, 1 claw type tack/staple lifter, 1 straight needle, 1 instruction booklet, 1 box of 12 oz. tacks, 1 box of 4 oz. tacks, 2 curved needles.

#1020 Combination Knife

8440

• Price Breaks: Each • Unit of measure: Each • This combination knife is made from the finest steel with both hook and pointed blade. It can be used for ripping seams, cutting auto carpeting, vinyl, plastic and rubber. Features a contoured Beechwood handle.

Visit www.jennisfabrics.com

353


TOO

Tools

KN

Knives

#14 Mount Trimming Knife

8051 • Price Breaks: Each • Unit of measure: Each • There are some jobs where you just need more leverage or a tougher blade than a razor knife. This is a tough, straight edged blade that is sharp enough to cut vinyls, carpet or other materials, and can be re-sharpened to stay that way from many years of service.

50 Standard Duty Olfa Blades 8059

10 Heavy Duty Olfa Blades 8055

50 Heavy Duty Olfa Blades 8058r cilisi

Ultra Max Heavy Duty Olfa Blades 8038

• Price Breaks: Package / 10

• Price Breaks: Package / 10

• Price Breaks: Package / 5

• Price Breaks: Package

• Unit of measure: Package of 50

• Unit of measure: Package of 10

• Unit of measure: Package of 50

• Unit of measure: Package of 50

• Extra blades Standard Duty Olfa Cutter.

• Extra blades for #8052.

• Extra blades for #8052.

Heavy Duty Olfa Cutter

8052 • Price Breaks: Each • Unit of measure: Each • Ergonomically designed ribs in the plastic handle give better grip and leverage with this cutter. The standard straight blades is also thicker at 0.5 mm, and there is an Ultra Max Heavy Duty Blade available for heavier work. Extra blades listed above.

354

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


#6 Rubber Mallet

TOO

Tools

MA

Mallets

5317

• Price Breaks: Each / 6 • Unit of measure: Each • Tough composite rubber head. Use it for setting decorative nails or dowels and other frame elements without damage. Will prolong the life of punches when used for driving them.

#4 Hickory Mallet

5313

• Price Breaks: Each / 6 • Unit of measure: Each • A mallet formed from tough growth hickory, with a head size of 2” x 3¼” (5.1 cm x 8.3 cm). Head weight is 12 oz.

Visit www.jennisfabrics.com

355


TOO

Tools

MI

Miscellaneous 118 Spray Gun

1158 • Price Breaks: Each • Unit of measure: Each • Low pressure adhesive spray gun • The 118 spray gun is a blow-over siphon type and produces a cone shaped spray. Adjustment of volume is made by screwing the fluid nozzle up into the air stream until the right flow is obtained. Due to its simplicity and ease of cleaning, it is particularly recommended for glues and other sticky liquids that tend to gum up painting equipment. With stainless steel tube and glass jar it can accommodate adhesives that degrade aluminum equipment. Also usable for touch up work and ideal for production painting of small articles. Light weight and easy to use. Shipping weight of 2 lbs. (0.9 kg).

Proper Alignment

118 Spray Gun Ideal for use with the following adhesives: 478 Foam Adhesive 1123 (requires stainless steel tube) EC 2218 (#5) Adhesive 1128 (requires stainless steel tube) JEF 2000 1145 (uses standard aluminum tube)

Air Nozzle

JEF 3000 1147 (uses standard aluminum tube)

Fluid Nozzle

Stainless Steel Repair Kit for 118 Gun 1163

Increase application rate by raising fluid nozzle into airflow

• Price Breaks: Each • Unit of measure: Each • Convert to stainless • Kit contains all the parts needed for repairing or rebuilding the 118 gun in stainless steel which allows the use of any adhesive. Kit includes replacement gasket, tube, nozzle, spring and locknut. Some parts are also available separately. See page 37.

356

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


Jar for 118 Gun: Glass 1159

Tube for 118 Gun: Aluminum 1160

TOO

Tools

MI

Miscellaneous

Fluid Nozzle for 118 Gun 1161olorer cilisi

Tube for 118 Gun: Stainless Steel 1162

• Price Breaks: Each / 12

• Price Breaks: Each

• Price Breaks: Each

• Price Breaks: Each

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

Air Valve Spring for 118 Gun 1170

Air Nozzle for 118 Gun 1172

Nozzle Spring for 118 Gun 1174r cilisi

Locknut for 118 Gun 1175

• Price Breaks: Each

• Price Breaks: Each

• Price Breaks: Each

• Price Breaks: Each / 10

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure:: Each

• Unit of measure: Each

EZE Spray Gun

1165

• Price Breaks: Each • Unit of measure: Each • Light weight & Economical Adhesive Sprayer • EZE Spray Gun is a lightweight, durable alternative to more expensive sprayers. Blowover siphon action keeps parts to a minimum and cleaning simplicity to a maximum. Tube height is adjustable by loosening the adjustment nut and then sliding tube to achieve desired spray density. Easy to clean: loosen the adjustment nut and slide the vacuum tube completely out. Dip tube in solvent to blow out with spray gun. Plastic glue pot.

Visit www.jennisfabrics.com

357


TOO

Tools

MI

Miscellaneous Pro 90 Glue Gun

1151 • Price Breaks: Each • Unit of measure: Each • Industrial Hot Melt Glue Gun • Start saving time and money now with the affordable and reliable AD TECH Pro 90. Plug it in, allow a 5 minute warm up and then you can leave it on all day, ready to use in an instant. Sensitive triggering allows as much variation of glue volume and bead size as needed, and the lightweight unit eliminates hand fatigue. The translucent round glue sticks dry transparent for invisible glue lines. This trim and efficient unit is economically priced and will deliver up to 2.2lbs per hour of glue in continuous use. Operating temperature is 205°C (400°F).

5999

777 Quick Nail

• Price Breaks: Each • Unit of measure: Each • Use the Quick Nailer to evenly space decorative nails. It is quick and easy to use. For a list of the nails available see page 289.

TAP

Tape

MI

Miscellaneous 2” Hand Tape Dispenser

7985

2” Carton Sealing Tape

• Price Breaks: #7985 Each / 5

7990

#7990: Roll / 6 / 36

• Unit of measure: Each • 2” Hand Tape Dispenser: Sturdy and durable dispenser will handle tapes from 1½” 2” (3.8 - 5.1 cm) wide. Easy to load, makes packaging and carton sealing a breeze. Use with #7990. • 2” Carton Sealing Tape: All round polypropylene packaging tape; 2” (5.1 cm) width. Has good moisture and impact resistance. 100 m/328’ roll.

358

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


TOO

Tools

MI

Miscellaneous

EZE Cushion Stuffing Machine 3010 • Price Breaks: Each • Unit of measure: Each • Vacuum table cushion stuffing machine. Place the cushion on the table, then wrap it on all sides and just underneath the edges with 2 or 3 cents worth of EZE cushion film. Turn the machine on and the cushion will be compressed to a small, easy to handle size. Then slide the cover casing over the compressed cushion fill and turn the machine off. The foam re-expands to fill the cover and will need only a bit of adjustment. This unit is a real time saver for a shop that is doing a lot of cushion filling. Comes with a motor. The film is available in 54” (137 cm) width (folded on 27” (68 cm) roll for easy handling) of 2500 yards (2285 m) and the machine runs off regular household current. It is light enough to be considered portable. Film listed below.

54” EZE Cushion Film Plastic 3011

• Price Breaks: Roll • Unit of measure: 2500 yard/2285 m roll

1. Set the cushion foam on the table.

2. Cover with EZE cushion film.

3. Turn on the EZE cushion machine and the cushion is compressed down.

4. Fitting the cover is now a simple matter, no tugging and fighting.

Visit www.jennisfabrics.com

359


TOO

Tools

MI

Miscellaneous 522 Seam Stretcher

8037 • Price Breaks: Each • Unit of measure: Each • Use this unit to stretch seams out prior to blind stitching to ensure that you have all wrinkles and puckers out. You can pre-shape the cushion before sewing to take out the guess work.

Bazooka Cushion Filler

4348 • Price Breaks: Each • Unit of measure: Each • This tool will be invaluable when it comes to working with chip foam. Use the Bazooka cushion filler with an air compressor to blow chip foam into your cushions.

Two Spool Thread Stand

11800 • Price Breaks: Each • Unit of measure: Each • High quality dual spool thread stand is similar to many OEM designs. Mounts securely to the deck of the machine or table, and the height is adjustable so that you can set it at a point where vibration from the machine does not cause thread to roll off the spool down to the base of the cone. Two eyes above the spools keep the thread feeding neatly off the cones as designed.

360

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


TOO

Tools

OS

Osborne

Hole Cutter • Price Breaks: Each • Unit of measure: Each • Hole cutters for use with the Cruiser and Osborne grommets. Be sure to use with a soft surface underneath, ideally a hole cutting pad (#6120, page 349). These cutters will work with either the Cruiser or the Osborne grommets. Simply size them to the hole you need either by diameter or by grommet number (1-A cutter is for #1 grommet).

#00-A 3/16” #0-A ¼” #1-A 9/32” #2-A 3/8”

5059 5024 5031 5032

#3-A 7/16” #4-A ½” #5-A 5/8”

Osborne Plain Grommet Hand Setting Dies

5033 5037 5038

• Price Breaks: Each • Unit of measure: Each • Hand setting tools for the Osborne brand plain grommets. Each set consists of two parts: the punch and the die. Note that the spur and plain are not interchangeable; you must have the specified die for each type.

#00 Plain Die #0 Plain Die #1 Plain Die #2 Plain Die

5020 5034 5021 5022

#3 Plain Die #4 Plain Die #5 Plain Die

5023 5025 5026

Osborne Spur Grommet Hand Setting Dies • Price Breaks: Each • Unit of measure: Each • Grommet setting tools for the Osborne brand spur grommets. These require a special die as setting the teeth on the spur washer uses slightly different size and die face from the plain, and must ensure the spur teeth fit into the rolled rim for maximum strength.

#0 Spur Die #1 Spur Die #2 Spur Die

5019 5055 5028

#3 Spur Die #4 Spur Die

5027 5029

Visit www.jennisfabrics.com

361


TOO

Tools

PI

Piping 4” Piping Tins

6415 • Price Breaks: Pair • Unit of measure: Pair • Piping tins are used to achieve consistent, even fluting in sofa backs and other locations on furniture. Provided in pairs. Insert into the channel, stuff and remove, leaving behind an evenly stuffed, clean and well padded channel. All metal construction. Available in 4” (10.2 cm), 35” (88.9 cm) long. • When trying to get padding into a channel or existing cover, you will often find that as you force the stuffing into the cover, it tears and you lose the smooth, even finish you wanted. Tip 1: Use silicone spray liberally on the stuffing; it will evaporate without leaving a trace or stain. Tip 2: Run a strip of 2” (5.1 cm) or wider tape along the stuffing, on the side that will be away from the cover, to prevent the stuffing from ripping. This method is especially useful with felt padding.

TOO

Tools

PU

Punch #155 Revolving Punch

8017 • Price Breaks: Each • Unit of measure: Each • #155 Revolving Punch is a heavy duty punch with replaceable anvil and cutters. Strong metal construction. Useful for everything from punching holes for setting fasteners, to holes at the ends of cuts in vinyls to minimize chances or tearing (this process is recommended by Naugahyde® and is a good idea for any material that has a tendency to rip). It comes complete with six sizes or cutters installed. Anvils and dies to replace the originals when they eventually wear out are listed on the next page.

362

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


Punch Replacements

TOO

Tools

PU

Punch

TOO

Tools

QU

Quick FIt

• Price Breaks: Each • Unit of measure: Each • Order only the cutters you need, or just the anvil if it wears out first. These cutters just thread into place on the punch. A pair of pliers is all that is needed for installation. The anvil must be tapped out and the stem of the new one tapped in with a hammer.

#1 Punch Cutter #2 Punch Cutter #3 Punch Cutter #4 Punch Cutter

Quick Fit Release Tool

8015 8016 8018 8019

#5 Punch Cutter #6 Punch Cutter Anvil

8020 8012 8011

3935

• Price Breaks: Each • Unit of measure: Each • The Quick Fit fastener is a reusable, removable Dura Snap type of fastener that can be set into place to speed up fitting and then removed for final placement of permanent snap fasteners. Removing the Quick Fit leaves a small pinhole that can be used as a guide for the permanent fastener. This simple tool releases Quick Fit temporary snaps with a twist of the wrist. See the full line of Quick Fit fasteners on page 150.

Visit www.jennisfabrics.com

363


TOO

Tools

RI

Rivets Hand Rivet Gun

6635 • Price Breaks: Each • Unit of measure: Each • Plier type rivet gun with different heads for different diameters of rivets. Easy one hand operation, you can place the rivet into the tool and then position it in the job. Squeezing the handle causes the teeth inside the tool to extract the mandrel, which mushrooms the rivet (as in sketch).

TOO

Tools

SH

Sharpener Shear Sharpener

7041 • Price Breaks: Each • Unit of measure: Each • Save time and money with this special vise and pivot arrangement for sharpening knife edge shears. No more lost time waiting for you shears to be returned from the sharpener; do them yourself. This unit must be firmly mounted onto a table or base. It is not designed to work free standing. The coarse stone in this unit is replaceable; it is the only shear sharpener you will ever need.

364

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


TOO

Tools

SH

Sharpener

Replacement Coarse Stone 7042 • Price Breaks: Each • Unit of measure: Each • For #7041 Shear Sharpener

Instructions for Shear Sharpener Save time and money with this special wise and pivot arrangement for sharpening knife edges on your shears. Loosen the thumbscrew holding the vise assembly and make sure it is perpendicular to the base assembly. Leave this thumbscrew loose as you will have to make adjustments for the angle of each blade. Place the shear in the vise as shown. The blade should be about 5/16” (8 mm) above the clamping edge of the vise, with the tip slightly up. Now adjust the ball pivot and vise assembly to get the correct angle on the blade edge. Set the stop collar on the stone handle so that you cannot draw the edge of the stone past the blade. Tighten all the thumbscrews. Sharpen the blade by sliding the handle assembly to the right as you draw back. Do not press down, the stone will hold the edge smoothly. Steady the unclamped jaw of the shear as you sharpen, use the coarse stone first, then the finer one to finish. Once you have a sharp edge on one jaw of the shear, remove it and fit the other end into the vise. Check that the angle is still correct and then repeat the process.

Visit www.jennisfabrics.com

365


TOO

Tools

SI

Sinuous Spring Pull Type Spring Stretcher

7903 • Price Breaks: Each • Unit of measure: Each • Simple metal/wood tool allows a secure grip on the spring so it can be stretched into place in an existing clip. Useful for awkward spots where the lever type (below) will not fit. Contoured handle for comfort.

Pull Type Spring Stretcher

7904 • Price Breaks: Each • Unit of measure: Each • Wooden handled lever type stretcher speeds up the installation of sinuous springs, and is especially useful with heavy seating springs.

Spring End Former

7905 • Price Breaks: Each • Unit of measure: Each • Lever action tool that can be used as a vice, but is best mounted to the edge of a workbench. Simplifies the crimping of spring ends (both coil and sinuous). A cleanly crimped spring end will not slide out of clips, and can provide a spot for hog rings or clips. Instructions and mounting bolts included.

366

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


#445 Pliers for 3 Prong Clips

TOO

Tools

SI

Sinuous Spring

8013

• Price Breaks: Each • Unit of measure: Each • The pliers to use when crimping onto curved spring surfaces. Use these pliers and the 3 prong clips to get the best connection on curves and arcs. Special double pivot action ensure tight and complete crimping

#522 Pliers for BW Clips

8026

• Price Breaks: Each • Unit of measure: Each • Special round contact surface on the jaws of this plier ensure a good solid clamping of BW clips; recommended for joining edge wire to sinuous springs or other straight spring sections. If you are working with curves, the 3 prong clip and plier combination is best.

1” Spring Bender

7907

• Price Breaks: Each • Unit of measure: Each • Chrome plated sleeves are slotted to fit loops and can be used to alter bends precisely. Designed to allow exact manipulation of the angles of the arcs on the spring. High impact handles.

Visit www.jennisfabrics.com

367


TOO

Tools

SP

Self Piercing PM5 Bench Snap/Grommet Machine 5030 • Price Breaks: Each • Unit of measure: Each • This sturdy machine will set self piercing grommets and will also accommodate snap fasteners with a separate set of dies. If you are only going to have one machine on your bench, this should be the one. Has a deeper throat and longer padded handle. Approximate height once bolted to the workbench is 12” (30.5 cm). Dies sold separately, see below. • Note: This machine must be bolted to the bench, it is not portable. If you require a portable machine, use the aluminum machine listed below.

Alum PM5 Snap/Grommet Machine 5057 • Price Breaks: Each • Unit of measure: Each • A lightweight aluminum version of the PM5 machine listed above . Will work with all the same dies for snaps or our full line of self piercing grommets. Suitable for portable use when mounted on a small plywood platform for stability. Dies sold separately.

PM5 Machine Dies • Price Breaks: Each • Unit of measure: Each • Die sets for the self piercing grommets. Each grommet size requires its own dies.

¼” Die 5 /16” Die 3 /8” Die

368

5052 5054 5056

½” Die /16” Die

9

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS

5058 5060


TOO

Tools

ST

Steamers

Esteam Hand Held Steamer 7288 • Price Breaks: Each • Unit of measure: Each • Portable steamer, hand held and versatile for removing wrinkles and puckers in fabrics, especially velvets. Not an industrial all day use steamer, but perfect for on site adjustments to upholstery or draperies, and for occasional use in smaller shops. Easy to fill and has a visible water level indicator, Heats up quickly, starts producing steam in 15 seconds and has a large steam vent for a continuous flow of steam. Features a built in thermostat and an on/off indicator light.

J-2 Jiffy Steamer

7283

• Price Breaks: Each • Unit of measure: Each • J-2 standard steamer from Jiffy operates with ordinary tap water and is easy and safe to use. Has a 5½’ (1.7 m) hose and sectional rod set, removable for storage. Comes with an assembly wrench for easy, convenient setup. Heavy duty wiring. Die cast aluminum housing with 1 gallon (4.5 L) check-value water bottle that prevent spilling. New improved heating element produces steam quickly and is specially designed to control “spitting”. Easily disassembles to remove mineral deposits. Has a shipping weight of 10lbs. (4.5 kg). The heating elements can be replaced.

J-4000 Jiffy Steamer

7284

• Price Breaks: Each • Unit of measure: Each • The J-4000 professional duty model has dual thermostats for steam in seconds after preheating. Features built in boiler tank made from strong rust proof #304 stainless steel. Contains a sight gauge allowing you to quickly keep a visual check on the water level within the steamer. A 1500 watt heating element is designed for long life. This unit features heavy duty coded high temperature wiring and a 3 position switch with automatic shut off. UL, CSA and CE approved. Shipping weight for this unit is 29lbs. (13 kg). The heating element can be replaced separately.

Visit www.jennisfabrics.com

369


TOO

Tools

ST

Steamers J-2 Replacement Heating Element 7285

J-4000 Replacement Heating Element 7289

J-3 Replacement Heating Element 7286olorer cilisi

Replacement Hose 7287

• Price Breaks: Each

• Price Breaks: Each

• Price Breaks: Each

• Price Breaks: Each

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each • 5½” (1.7 m)

TOO

Tools

TA

Tackers Berry Staple Remover

8041 • Price Breaks: Each • Unit of measure: Each • This long time favorite has two grooves, one in each prong, to enable you to grab staples, or you can just use the corner edges to lift tacks. Large wooden handle gives good grip and leverage and is easy on the hands.

370

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


#402 ½” Staple Remover

TOO

Tools

TA

Tackers

8046

• Price Breaks: Each • Unit of measure: Each • Combination staple and tack remover has a notched, chiselled blade that will get under the most stubborn staples. The high impact plastic handle can be hit with mallets without fear of breaking or chipping. The chiselled shape of the notch lifts tacks automatically as it is applied.

#121 Comb Type Staple Remover 8047lo • Price Breaks: Each • Unit of measure: Each • Light and versatile tool for removing staples or tacks. The comb edge will allow removal of multiple staples or tacks, the notched end will get at the stubborn ones. Wooden handle and tempered steel blade.

#402 Ripping Chisel

8034

• Price Breaks: Each • Unit of measure: Each • For the worst staples and tacks, this ripping chisel is the answer. The tough plastic handle will accept mallet blows to get under the worst fastener and it can be used to remove unwanted wood sections or to split wood joints if needed.

Visit www.jennisfabrics.com

371


TOO

Tools

TA

Tackers #120 ½” Staple Lifter

8048 • Price Breaks: Each • Unit of measure: Each • This lifter has the correct angle for removing staples of any size from the smallest to the long leg staples and shredded materials. Tough plastic handle. Best choice for staples buried deeply when damaging the wood would be a problem. • Tip on staple removers: When pulling staples from very soft wood or when prying against show wood, you will sometimes want to use a small piece of metal (an old ruler section is ideal) under the remover so that you are levering against this and not putting dents in the wood.

Pneumatic Ripping Tool 8045

Replacement Staple Remover Attachment 8042

Replacement Puller Attachment 8049er cilisi

• Price Breaks: Each • Unit of measure: Each • New tool makes short work of stripping furniture • An adjustable tool that takes the strain out of removing tacks, staples, and other fasteners from furniture frames. Comes complete with attachments. This air tool can be adjusted be regulating the air pressure to compensate for hard or soft woods. It can also be used to lift all kinds of fasteners out of woods, as well as lifting shredded fabric that has “glued” itself to the frame over time. Ideal for speeding up one of the worst jobs in the shop: stripping furniture. Comes with staple chisel and puller chisel.

Fasco 1400 Series Tacker

7211 • Price Breaks: Each • Unit of measure: Each • High quality Fasco pneumatic tacker for use with the staples listed on page 284. Piston/driver assembly also available (#7214).

372

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


TOO

Tools

TA

Tackers

Piston/Driver Assembly for #7211 7214 • Price Breaks: Each • Unit of measure: Each • The replacement set for the piston and driver for the Fasco 1400 air tacker. These are the only parts of the air tacker that wear over time, and are replaceable as a set to restore performance.

JEFast 1416 Air Tacker

7216

• Price Breaks: Each • Unit of measure: Each • JEFast is a lighter, more economical air tacker offered as an alternative for smaller shops. This model works with the 1400 series stapler

Piston O-Ring for #7216 7226

Staple Magazine for #7216 7227

Piston/Driver Assembly for #7216 7225

• Price Breaks: Each / 5

• Price Breaks: Each / 5

• Price Breaks: Each / 5

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

• Replacement O-ring for the piston of the 1416 JEFast air tacker.

• Replacement magazine spring for the 1416 JEFast air tacker.

• Replacement piston for 1416 JEFast air tacker.

Visit www.jennisfabrics.com

373


TOO

Tools

TA

Tackers Fasco 71 Series Tacker

7210 • Price Breaks: Each • Unit of measure: Each • High quality Fasco pneumatic tacker for use with the staples listed on page 286. Pneumatic staplers have the advantages of having very few moving parts and those that do are easily replaceable. You can adjust the pressure you drive your staples at by adjusting the air pressure. Fasco has been a trusted name for professional industrial quality tools for many years. Piston/driver assembly also available #7215.

Piston/Driver Assembly for #7210

7215

• Price Breaks: Each • Unit of measure: Each • The replacement set for the piston and driver for the Fasco 71 air tacker. These are the only parts of the air tacker that wear over time and are replaceable as a set to restore performance.

JEFast 7116 Air Tacker

7217 • Price Breaks: Each • Unit of measure: Each • The JEFast line is lighter, more economical air tacker offered as an alternative for the smaller shops. All the 71 series stapler will work well in this lighter unit.

374

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


Piston O-Ring for #7217 7229

Staple Magazine for #7217 7228

Tools

TA

Tackers

Piston/Driver Assembly for #7217 7230orer cilisi

• Price Breaks: Each / 5

• Price Breaks: Each / 5

• Price Breaks: Each / 5

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

• Replacement O-ring for the piston of the 7116 JEFast air tacker.

• Replacement magazine spring for the 7116 JEFast air tacker.

• Replacement piston for 7116 JEFast air tacker.

Drill Steady

TOO

TOO

Tools

TU

Tubing

11072

• Price Breaks: Each • Unit of measure: Each • Small clamp-on drill guide used for drilling stainless tubing and pipe. Swing off design allows tool to be used without disassembly of the frame. Cast bronze body with knurled bronze thumbscrews and tool steel drill brushing. Accepts tubing from ¾” to 1¼”. Standard drill size – 9/64”

No More Wasted Tubing Bend tubing without marring or kinking is a problem unless you have the right equipment. The Bendarc® tool mounts solidly to a workbench or wall and is constructed of a steeler boiler plate and the toughest polymers available. It comes with a graduated scale generated by a computer that eliminates the guesswork and results in no wasted materials; the bends are right the first time. Merely mark your bends, insert and clamp the piece into the Bendarc®, advantage to give you precise control of the degree of bend. This machine is strong enough to bend either aluminum or stainless steel tubing. See #8370 for a kit that changes the polymer dies and allows for the bending of the 1” (2.54 cm) square tubing. Although not specifically listed for this application, the ⅞” (2.2 cm) die set will work with the ¾” (1.9 cm) aluminum tubing.

Visit www.jennisfabrics.com

375


TOO

Tools

TU

Tubing Bendarc®

7210 • Price Breaks: Each • Unit of measure: Each • #8394: 12” radius for 1” is by special order only.

6” Radius for 7/8” 8” Radius for 7/8” 12” Radius for 7/8”

Bendarc® 1” Square Tubing Kit

8378 8388 8396

8” Radius for 1” 10” Radius for 1” 12” Radius for 1” 12” Radius for 1” Square

8382 8392 8394 8379

8370 • Price Breaks: Each • Unit of measure: Each • Set of strong polymer replacement dies to allow a Bendarc® tool to cleanly and neatly bend square tubing. Note: Bendarc® not included. Use with 10” radius.

CrownArc®

8380 • Price Breaks: Each • Unit of measure: Each • Gear driven tubing crowner gives smooth consistent crowns • The CrownArc® device gives beautiful smooth consistent crowns, with no sharp edges or awkward kinks, to round stainless steel or aluminum tubing in sizes from ¾” (1.9 cm) up to 1” (2.54 cm). The 1” (2.54 cm) rollers work properly with smaller sizes as well. Both the lower rollers on the CrownArc® turn providing better control over the feed and curve imparted. It also allows a bigger bite to give more crown per pass. • Easy to use: Insert the bow and tighten the knurled knob about ¾ of a turn; then crank it through. If you wish more arc, then tighten some more and crank the bow through again.

376

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


TOO

Tools

WE

Webbing

3½” Jaw Webbing Stretcher 8022 • Price Breaks: Each • Unit of measure: Each • Made with a hammer jaw that acts as a lever. Excellent tool for stretching webbing as well as leather and canvas.

#8 Wooden Webbing Stretcher 8023

• Price Breaks: Each • Unit of measure: Each • A wooden stretcher with a corrugated rubber grip on one end and a row of six steel teeth on the other.

#403 Goose Neck Webbing Stretcher 8024

• Price Breaks: Each • Unit of measure: Each • Goose Neck Stretcher gets your hands away from the steel teeth and provides great leverage on the webbing. Hard wood with corrugated rubber on the butt of the stretcher. Polished steel pins grip the webbing with a minimum or ripping.

Visit www.jennisfabrics.com

377


TOO

Tools

WE

Welder

Eagle Hot Air Welder

2840

Replacement Element for Eagle Gun 2841

• Price Breaks: Each • Unit of measure: Each • Handheld hot air welder. Lap welds soft thermoplastics without additional materials other than the use of a silicone roller to provide the necessary pressure to weld. Particularly suited to welding tarpaulins and single ply roofing material. Air temperature is adjustable from ambient up to 625°C (1157°F). Element is quick change type, with no tools required. Runs on standard house current, although a 220 volt model is available on special order. Weighs only 3lbs. (1.4 kg), including power cord. Heating element will fit as a direct replacement for the Leister brand and is a simple pull out, plug in operation. Features include recessed temperature control knob, a booted power switch and screened air inlet to protect against damage. Air flow is adjustable up to 15 CFM. Built in over temperature protection, protects the heating elements and electronics. • #2841: Replacement element for #2840 Eagle Hot Welder.

2845o

Silicone Roller

• Price Breaks: Each • Unit of measure: Each • Tough silicone roller mounted on a sturdy handle for pressure rolling tarps while being heat welded. Also very useful for flattening out any surface for being glued or fit to complex shapes, such as carpeting to automotive floors or vinyl onto complex shapes. It is also used for working with heat such as hot air guns or lamps to soften the vinyl. Silicone roller does not absorb glues or materials and can be easily cleaned after use.

2” Angle Slit Nozzle

2846 • Price Breaks: Each • Unit of measure: Each • #2846: 2” (5.1 cm) angle slit nozzle is ideal for welding seams or applying heat into corners. For use with Steinel gun only.

378

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


Zipper Stop Plier

TOO

Tools

ZI

Zippers

11010

• Price Breaks: Each / 6 • Unit of measure: Each • Enables you to shorten zippers or make zippers of any length when working with continuous zipper tape. Helps to eliminate slippage and rotation of the zipper stops. Has a special groove that firmly holds the zipper stop in place. High quality forged steel with vinyl handle.

Visit www.jennisfabrics.com

379


TRI

Trimmings

GI

Gimp Scroll Gimp

• Price Breaks: Each / 5 • Unit of measure: 36 yard/33 m roll • Scroll gimp is a durable and attractive ornamental trim used to cover seams on French Provincial and other delicate and intricate furniture styles. Available in a broad range of colors. This products is composed of 58% cotton and 42% rayon. Normally attached to wood with the #504 Latex, which allows it to remain flexible after glue has dried. It can also be used to decorate and trim accessory items using a hot melt glue gun. • To see the entire color range, see the Color Index on page 437.

Alabaster Alpine Antique Antique Gold Aquamarine Aquatic Artichoke Auburn Avocado Bark Brown Beachwood Beaver Bison Black Black Cherry Black Olive Black Rum Branch Brown Burnt Toast Camel Carnival Cedar Celadon Champagne Chartreuse Cherry Chinese Red

380

C16 Chocolate Cherry L60 Claret Y28 Cocoa Praline D06 Coin Gold PR10 Copper M17 Cream L28 Crimson E26 Danube L05 Dark Claret E11 Dark Green D22 Dark Navy L80 Dark Rust E29 Dark Sand R01 Dawn J15 Desert Sand L52 Doric Khaki H13 Dreamsicle L58 Dusty Grape E03 Ecru E15 Eggplant E16 Flambé PRA2B French Blue L77 Garden L26 Gold D01 Grain 9628 Green Mist J01 Harvest Gold J19 Hazelnut

W41 J23 PR16 D03 K28 C17 K33 M51 J20 L44 M42 K35 C07 C14 PR21 L50 PR01 H12 C06 H07 PR02 M45 Y04 D25 C04 L47 D24 PR03

Honey Dew Honey Suckle Hunter Green Ivory Kasha Latté Leaf Green Light Brown Light Rose Loden Green Maize Maroon Medium Blue Medium Grey Metallic Snow Midnight Mocha Natural Oatmeal Off White Old Gold Oyster Pale Banana Parchment Peacock Pearl Pebble Peridot

L62 PR07 L39 C25 C01 PR08 L43 E24 S21 L79 D26 J11 M53 P05 Y01 M52 E18 B01 C02 C19 D05 C11 D17 C21 9620 PR11 C23 PR12

Pink Dawn Pitch Red Ruby Rust Sage Sandal Sandstone Sea Mist Seacrest Seal Brown Shell Star Night Straw Strawberry Summer Daze Sunset Surf Taupe Terra Cotta Tobacco Tuxedo Ultrasuede Vanilla Very Berry Wheat White Wine

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS

C05 M56 J04 J16 K19 L49 K32 C12 L48 L46 E02 C03 YG2 E14 Y05 PR17 PR15 L41 C29 K50 E20 PR23 PR24 C15 PR22 C22 A01 J18


TRI

Trimmings

ED

Edge

Trimmings J. Ennis Fabrics also carries a full line of decorative trims and fringes for your furniture finishing needs. This range includes ball fringes, bullion trims, knot fringes, cut fringes, tassels and flange and rouche cords. See our Home Décor Essentials binder or contact your sales representative for the full range.

¾” Spunbonded Edgeroll 4200 • Price Breaks: Roll / 12 • Unit of measure: 50’/15.2 m roll • An edge roll padding with an attaching flange, used for padding corners, arms, etc. Firm material avoids packing down. Can be attached by stapling, tacks or tacking strips.

1¼” Spunbonded Edgeroll

4205

• Price Breaks: Roll / 6 • Unit of measure: 50’/15.2 m roll • A larger diameter edge roll padding with an attaching flange, used for padding edge wire, frame edges in front of springs, etc. Firm materials avoids packing down. Can be attached by stapling, tack or tacking strips.

Visit www.jennisfabrics.com

381


TRI

Trimmings

ED

Edge 1¼” Perflex Clip Edgeroll 4208 • Price Breaks: Roll / 5 • Unit of measure: 50’/15.2 m roll • Perflex features an all synthetic filler and tough spunbonded cover. It has built in positioning stakes spaced at 1½” (3.8 cm) intervals, or can be sewn, stapled or tacked on for hard edge designs.

½” Polycord

4299 • Price Breaks: Roll / 2 • Unit of measure: 1000’/304 m roll • Upholstery thumb roll that contours to the most demanding shapes and is durable, soft, resilient and easy to use.

#8 Poly-Flex

4269 • Price Breaks: Roll / 5 • Unit of measure: 500’/152 m roll • High crown protective edging of Styrofoam material. Ring-flex was custom designed to meet the needs of the furniture industry.

382

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


#10 Poly-Flex

TRI

Trimmings

ED

Edge

4279

• Price Breaks: Roll / 4 • Unit of measure: 500’/152 m roll • ¾” (1.9 cm) rise contoured Poly-Flex for frame edging.

#12 Poly-Flex

4289

• Price Breaks: Roll / 5 • Unit of measure: 200’/61 m roll • Wedge shaped frame edging in Styrofoam with a 1¼” (3.2 cm) rise.

Xtreme Seal Awning

2805

• Price Breaks: Yard / 125 / 250 • Unit of measure: Yard • Closed-cell flexible awning sealer with 3M adhesive on the backing. Use awning seal for the best seal and ease of installation of awnings. With the self adhesive 3M back, it stays in place.

Visit www.jennisfabrics.com

383


TRI

Trimmings

OF

Office Chair

Office Chair Molding

6340 • Price Breaks: Roll / 5 • Unit of measure: 150’/46 m roll • A multi-purpose molding for edging office chairs and booths, or anywhere a neat clean edge molding is needed. Smooth black flexible material can be stapled, tacked or screwed into place. It will cover the mounting or retain a back cover tucking in the free edge.

TRI

Trimmings

WE

Welting

5

/32” Twin Fiberflex Welt

9752 • Price Breaks: Roll / 10 • Unit of measure: 250 yard/228.5 m roll • Two 5/32” (0.4 cm) T braid welt cords together to form decorative twin welt.

384

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


TRI

Trimmings

WE

Welting

Fiberflex Welt • Price Breaks: Roll / 8

#9750: Roll / 10

• Unit of measure: Roll (varies, see below) • Roll size: #9739: 1600 yards, #9749: 1000 yards, #9750: 500 yards, #9759: 800 yards, #9761: 500 yards, #9762: 225 yards. • T braid welting cord in various sizes. 5/32” (0.4 cm) is standard in furniture manufacturing. The smaller size is very common in automotive and RV applications. T braid welt features a wrapping of strong, tight thread that makes it very stable and consistent over time.

/32” 5 /32” 5 /32” 4

9739 9749 9750

/32” Polyrod Welt

5

9759 9761 9762

/32” /32” 12 /32” 6 8

9819

• Price Breaks: Roll / 3 • Unit of measure: 1333 yard/1218 m roll • High density polyethylene rod suitable for attaching pillow backs or anywhere you want stiff welting to help maintain the shape of an upholstered piece.

/32” Poly Welt (1250 yards) 9825

4

/32” Poly Welt (500 yards) 9830

5

/32” Poly Welt (500 yards) 9827orer cilisi

6

• Price Breaks: #9825: Roll / 8, #9830: Roll / 10, #9827: Roll / 6 • Unit of measure: Roll (see above) • Softer, single filament plastic welting cord in various diameters.

Visit www.jennisfabrics.com

385


TRI

Trimmings

WE

Welting

J Welt

8435 • Price Breaks: Roll / 5 • Unit of measure: 100’/30.4 m roll • Used to repair truck and tractor seats. The welt is sewn to the bottom of the cover, then snapped over the lower edge of the seat pan frame. Can be used anywhere there is a lip for the welt to hook over. Soft pliable plastic can be sewn by industrial machines.

½” Sponge Rod

7579 • Price Breaks: Roll / 5 • Unit of measure: 30 yard/27.4 m roll • Sponge rod is used for shimming and bolstering worn and shrunken weather stripping around doors and trunks.

386

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


Premier Welt Black

TRI

Trimmings

WE

Welting

9719

• Price Breaks: Roll / 4 • Unit of measure: 250 yard/229 m roll • 100% PVC welting cord with slit flanges for easy tailoring of corners, ⅛” (0.3 cm) diameter welting designed specifically for the sport bag and accessory industry.

Embossed Welt

• Price Breaks: Roll / 8 • Unit of measure: 100 yard/91.4 m roll • 100% PVC welting cord with slit flanges for easy tailoring of corners. 3/16” (0.48 cm) diameter welting designed specifically for automotive seating, sport bag and accessory industry.

Navy White Bright Red

9834 9836 9838

Black Maroon Buckskin

9849 9884 9897

Visit www.jennisfabrics.com

387


TRI

Trimmings

HY

Hydem Gimp

Hydem Gimp White

4983

Hydem Gimp Black

4984

• Price Breaks: Roll / 4 • Unit of measure: 50 yards/46 m roll • Self-finishing vinyl gimp. The lips of the gimp can be forced open, then attached by staples or tack. They will close back on themselves to give a finished double welt type of seam. There will be no sign of the tack or staples.

TRI

Trimmings

MI

Miscellaneous Snap on Trim Black

8400 • Price Breaks: Roll / 5 • Unit of measure: 100’/30.4 m roll • A flexible plastic wind lace with a metal core and leather grain surface. For snap on installation on pinch-welded seams. Suitable for import or domestic autos, interior or exterior use.

388

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


¾ “ Repp Wire on Binding Black 5002

BIN

Binding

WI

Wire On

¾ “ Repp Wire on Binding White 5003

• Price Breaks: Each / 10 • Unit of measure: 25 yard/22.8 m roll • Automotive/Truck Binding • Traditional binding that is stitched in place on the edge of the cover, then wired in place on the frame with hog rings or other fasteners. • Available black or white on 25 yard/22.8 meter coils

XtremeEdge Seal Black

2787

FIT

Fittings

WE

Welting

XtremeEdge Seal White

2789

• Price Breaks: Foot / 25 /50 • Unit of measure: Foot/30.5 cm • Exclusive to J. Ennis Fabrics; unique, flexible edge seal. Can be sewn or glued to most materials and surfaces and creates a three point contact seal.

Visit www.jennisfabrics.com

389


VEL

Hook & Loop

SE

Sew On

Hook & Loop Tape This nylon fastener is a two part system; one part consisting of rows of hooks and the other part a mass of loops. When pressed together, they form a highly secure closure, yet can be easily re-opened with a simple peeling action. Since the introduction of this product, it has become widely used on garments, bags, footwear, tents and furniture. Completely washable and dry cleanable, these jam proof elements are adjustable and increase strength with pressure. They are available in sew on or pressure sensitive adhesive back forms.

/8” White Hook Tape 8984 5

/8” White Loop Tape 8985 5

/8” Black Hook Tape 8986r cilisi 5

/8” Black Loop Tape 8987 5

• Price Breaks: Roll / 5 • Unit of measure: 27.3 yard/25 m roll • ⅝” (16 mm)

¾” White Hook Tape 9012

¾” White Loop Tape 9013

¾” Black Hook Tape 9002ilisi

¾” Black Loop Tape 9003

• Price Breaks: Roll / 5 • Unit of measure: 27.3 yard/25 m roll • ¾” (20 mm)

390

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


¾” Beige Hook Tape 9028

¾” Beige Loop Tape 9029

¾” Grey Hook Tape 8996er cilisi

VEL

Hook & Loop

SE

Sew On ¾” Grey Loop Tape 8997

• Price Breaks: Roll / 4 • Unit of measure: 27.3 yard/25 m roll • ¾” (20 mm)

1” Hook and Loop (25 m)

• Price Breaks: Roll / 5 • Unit of measure: 27.3 yard/25 m roll • 1” (25 mm)

Black Hook White Hook Beige Hook Red Hook Royal Hook Grey Hook

9004 9014 9038 8980 8992 8998

1” Paiho Hook and Loop (45.7 m)

Black Loop White Loop Beige Loop Red Loop Royal Loop Grey Loop

9005 9015 9039 8981 8993 8999

• Price Breaks: Roll / 5 / 24 • Unit of measure: 50 yard/45.7 m roll • 1” (25 mm)

Black Hook White Hook Red Hook

13021 13023 13033

Black Loop White Loop Red Loop

13020 13022 13032

Visit www.jennisfabrics.com

391


VEL

Hook & Loop

SE

Sew On 1” Black Hook Tape 9026

1” Black Loop Tape 9027

1” White Hook Tape 9030orer cilisi

1” White Loop Tape 9031

• Price Breaks: Roll • Unit of measure: 546 yard/500 m roll • 1” (25 mm)

1½” Hook and Loop (25 m)

• Price Breaks: Roll / 5 • Unit of measure: 27.3 yard/25 m roll • 1½” (3.8 cm)

Black Hook White Hook Beige Hook

1½” Paiho Black Hook Tape 13025

1½” Paiho Black Loop Tape 13024

9008 9010 9044

Black Loop White Loop Beige Loop

1½” Paiho White Hook Tape 13027lisi

• Price Breaks: #13025, #13027: Roll / 16

1½” Paiho White Loop Tape 13026 #13024, #13026: Roll / 24

• Unit of measure: 50 yard/45.7 m roll • 1½” (38 mm)

392

9009 9011 9045

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


2” Hook and Loop (25 m)

VEL

Hook & Loop

SE

Sew On

• Price Breaks: Roll / 5 • Unit of measure: 27.3 yard/25 m roll • 2” (50 mm)

Black Hook White Hook Beige Hook Red Hook Royal Hook Grey Hook

2” Paiho Black Hook Tape 13029

9006 9016 9048 8982 8994 9000

Black Loop White Loop Beige Loop Red Loop Royal Loop Grey Loop

2” Paiho Black Loop Tape 13028

9007 9017 9049 8983 8995 9001

2” Paiho White Hook Tape 13031er cilisi

2” Paiho White Loop Tape 13030

4” White Hook Tape 9018rer cilisi

4” White Loop Tape 9019

• Price Breaks: Roll / 5 / 12 • Unit of measure: 50 yard/45.7 m roll • 2” (50 mm)

4” Black Hook Tape 9024

4” Black Loop Tape 9025

• Price Breaks: Roll / 5 • Unit of measure: 27.3 yard/25 m roll • 4” (100 mm)

Visit www.jennisfabrics.com

393


VEL

Hook & Loop

SE

Sew On 1” Hook/Loop Black

9032

2” Hook/Loop Black

9034

• Price Breaks: Roll / 5 • Unit of measure: 27.3 yard/25 m roll • 1” (25 mm) or 2” (50 mm)

VEL

Hook & Loop

PS

Pressure Sensitive ¾” Paiho Black Pressure ¾” Paiho Black Pressure ¾” Paiho White Pressure ¾” Paiho White Pressure Sensitive Hook Tape Sensitive Loop Tape Sensitive Hook Tape Sensitive Loop Tape 13037 13036 13039lisi 13038 • Price Breaks: Roll / 5 / 15 • Unit of measure: 25 yard/22.9 m roll • ¾” (20 mm) • An economical grade of pressure sensitive hook and loop tape. Recommended for lighter duty applications. Not recommended for all weather outdoor applications such as attaching tonneau covers, etc.

394

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


1” Pressure Sensitive (25 m)

VEL

Hook & Loop

PS

Pressure Sensitive

• Price Breaks: Roll / 5 • Unit of measure: 27.3 yard/25 m roll • 1” (25 mm) • An economical grade of pressure sensitive hook and loop tape. Recommended for lighter duty applications. Not recommended for all weather outdoor applications such as attaching tonneau covers, etc.

Black Hook White Hook Beige Hook

2” Black Hook Tape 9082

9080 9090 9070

Black Loop White Loop Beige Loop

2” Black Loop Tape 9083

9081 9091 9071

2” White Hook Tape 9092er cilisi

2” White Loop Tape 9093

• Price Breaks: Roll / 5 • Unit of measure: 27.3 yard/25 m roll • 2” (50 mm) • An economical grade of pressure sensitive hook and loop tape. Recommended for lighter duty applications. Not recommended for all weather outdoor applications such as attaching tonneau covers, etc.

¾” Display Dots White Hook

9120

• Price Breaks: Box • Unit of measure: Box of 200 • ¾” (20 mm) Display Dots in a utility package. These “coins” have top quality, high tack adhesive. Come on a peel off roll and are ideal for trade shows, demonstrations, displays, meetings, etc. Made of a display grade hook component and will stick to any loop style backing. Many cloths will work, but the best choice for a reusable display board or any surface you wish to use Display Dots is our line of Display Fabric. • Display Fabric is an industrial material available by the yard. Specifically designed fabric, consisting of 100% nylon face, laminated to a polyester foam core with a nylon tricot backing giving strength and performance. Represents the soft loop portion of the system, similar to the soft headliner materials but is designed to work with Velcro brand fasteners. Comes in a wide range of colors, please inquire with the CSC.

Visit www.jennisfabrics.com

395


VEL

Hook & Loop

PS

Pressure Sensitive 3M 1” Black Pressure Sensitive Hook 9106

3M 1” Black Pressure Sensitive Loop 9107

• Price Breaks: Each • Unit of measure: 50 yard/45.7 m roll • 1” (25 mm) • 3M’s Premium Performance 70 series Scotchmate™ Hook and Loop. Designed for static load applications where temperatures may reach 93°C (200°F) as in automotive, aircraft, electronics and business equipment. Many years of use as a fastener for attaching tonneau covers on pickup trucks demonstrates the product’s unique capability for use under stringent wet, dry, hot and cold cycling conditions. Operating temperature range: -29 - 93°C (-20 - 200°F)s. Passes F.A.R. 25.283 (b-3), FMVSS 302 (unattached), and F.A.R. 25.283 par (b), (b-2), F.A.R. 25.283 (b-3), FMVSS 302 when attached on metal panels. Recommended on base metals, painted metals, polystyrene, acrylic polycarbonate, rigid vinyl and glass. Works extremely well on a wide variety of materials.

Application Notes for Premium Performance Series Adhesive Adhesive backed products should be applied above 20°C (68°F) to surfaces that are smooth, dry and free of oils or mold release agents. It is recommended to wipe the substrate with an isopropanol/water solution (50/50) or with heptane or methyl ethyl ketone and allow to dry. With firm roller pressure, apply the Scotchmate™ allowing an appropriate dwell time at room temperature before loading or disengaging. Do not touch adhesive after liner is removed. To increase resistance to edge lifting, round the corners or recess product into substrate.

VEL

Hook & Loop

PO

Polyester

1” Paiho Black Polyester Hook 13041

1” Paiho Black Polyester Loop 13040

1” Paiho White Polyester Hook 13035ri

1” Paiho White Polyester Loop 13034

• Price Breaks: Roll / 24 • Unit of measure: 50 yard/45.7 m roll • 1” (25 mm) • 1” polyester hook & loop for use outdoors. Use on boat covers, outdoors and outwear.

396

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


1” Velcro Black Hook Tape 9058

1” Velcro Black Loop Tape 9059

1” Velcro White Hook Tape 9052ilisi

VEL

Velcro®

SE

Sew On 1” Velcro White Loop Tape 9053

• Price Breaks: Roll / 5 • Unit of measure: 50 yard/45.7 m roll • 1” (25 mm) • Velcro® Hook and Loop fastening system. Retains 50% fastening strength in water, back to 100% when dried. Closure strength increases as pressure applied. Maximum 4% shrinkage. Can be sterilized or autoclaved. Melting temperature is 204°C (399°F) and hand ironing temperature can be up to 163°C (325°F).

1½” Velcro Black Hook Tape 9060

1½” Velcro Black Loop Tape 9061

1½” Velcro White Hook Tape 9054cilisi

1½” Velcro White Loop Tape 9055

• Price Breaks: Roll / 5 • Unit of measure: 50 yard/45.7 m roll • 1½” (38 mm) • Velcro® Hook and Loop fastening system. Retains 50% fastening strength in water, back to 100% when dried. Closure strength increases as pressure applied. Maximum 4% shrinkage. Can be sterilized or autoclaved. Melting temperature is 204°C (399°F) and hand ironing temperature can be up to 163°C (325°F).

2” Velcro Black Hook Tape 9062

2” Velcro Black Loop Tape 9063

2” Velcro White Hook Tape 9056 cilisi

2” Velcro White Loop Tape 9057

• Price Breaks: Roll / 5 • Unit of measure: 50 yard/45.7 m roll • 2” (50 mm) • Velcro® Hook and Loop fastening system. Retains 50% fastening strength in water, back to 100% when dried. Closure strength increases as pressure applied. Maximum 4% shrinkage. Can be sterilized or autoclaved. Melting temperature is 204°C (399°F) and hand ironing temperature can be up to 163°C (325°F).

Visit www.jennisfabrics.com

397


VEL

Velcro®

PS

Pressure Sensitive 1” Velcro® Black Pressure Sensitive Hook 9108

1” Velcro® Black Pressure Sensitive Loop 9109

1” Velcro® White Pressure Sensitive Hook 9113er cilisi

1” Velcro® White Pressure Sensitive Loop 9114

• Price Breaks: Roll / 5 • Unit of measure: 25 yard/22.9 m roll • 1” (25 mm) • Velcro® brand Tempo pressure sensitive hook and loop fastener has a superior grade of adhesive backing that is suitable for most applications; indoor and out. There are very few applications that this fastener cannot handle.

2”Velcro® Black Pressure Sensitive Hook 9110

2”Velcro® Black Pressure Sensitive Loop 9111

• Price Breaks: Roll / 5 • Unit of measure: 25 yard/22.9 m roll • 2” (50 mm) • Velcro® brand Tempo pressure sensitive hook and loop fastener has a superior grade of adhesive backing that is suitable for most applications; indoor and out. There are very few applications that this fastener cannot handle.

VEL

Velcro®

ST

Stick 1” Velstick Black Hook 9067i

1” Velstick Black Loop 9066

1” Velstick White Hook 9064 isi

1” Velstick White Loop 9065

• Price Breaks: Each / 100 • Unit of measure: Each • 1” x 48” (2.5 x 122 cm) • Velstick Brand Fastener from Velcro® is a new semi-rigid flat vinyl extrusion with a protective beading along both side edges. The face has a permanently attached Velcro Brand woven nylon or polyester hook or loop or molded hook fastening component. Staple, screw, nail, rivet or slide into a special metal extrusion to attach. Ideal for use on tents, camping trailers, stationary and patio awning ties and many marine uses.

398

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


WEB

Webbing

CO

Cotton

Webbing Notes Webbing can be combined with buckles, hooks, sliders and other fasteners to create a variety of sport bags, cases and specialty items. Furniture webbing have been used as the basis of spring structures in wooden frames for decades. New webbing construction is now replacing the use of springs. Webbing for furniture is woven from various materials such as jute, propex, nylons and polypropylene. Break strength comparison: The different types of webbing have different break strengths. The break strength is relative to the width of the webbing. Material used in construction of webbing will affect the break strength: Webbing Type

Break Strength

1” (2.54 cm) Polypropylene 1” (2.54 cm) Heavy Duty Polypropylene 1” (2.54 cm) Nylon 1” (2.54 cm) Heavy Duty Nylon 1” (2.54 cm) Polyester Tie Down

460lbs. (208 kg) 1090lbs. (494 kg) 1270lbs. (576 kg) 1940lbs. (1334 kg) 4500lbs. (2041 kg)

Specific certification tests can be done for a service fee. All the numbers provided in this comparison are to be used as a rough guide. It is up to the end user to determine the suitability of any product for use in manufacturing.

1” Cotton Webbing Natural 9831

1½” Cotton Webbing Natural 9832

2” Heavy Cotton Webbing Natural 9550rer cilisi

• Price Breaks: Roll / 10 • Unit of measure: 50 yard/45.7 m roll

3¼” Jute Webbing

WEB

Webbing

JU

Jute

9709

• Price Breaks: Roll / 12 / 24 • Unit of measure: 72 yard/66 m roll • 9lbs. (4 kg) roll of the traditional upholstery jute webbing. Used for decades as the base for coil spring units, seat strapping, etc. Wider than most webbings at 3¼” (8.3 cm).

Visit www.jennisfabrics.com

399


WEB

Webbing

PR

Propex 3½” Propex Webbing

9699 • Price Breaks: Roll / 500 • Unit of measure: Meter (sold in full rolls) • 100% polyolefin webbing. A tightly woven webbing in a 3½” (8.9 cm) width that resists rot and mildew. All synthetic fibers are strong and sanitary. Roll sizes vary from 100 m to 140 m.

WEB

Webbing

FU

Furniture 2” Furniture Webbing #1 Soft 9712

2” Furniture Webbing #3 Medium 9710

2¾” Furniture Webbing #3 Medium 9714er cilisi

2” Furniture Webbing #5 Firm 9715

• Price Breaks: Roll / 10 • Unit of measure: 50 yard/45.7 m roll • Over 90% of all furniture sold in Europe uses a webbing suspension system. They are more economical than springs, easy to install (they can be applied to wooden frames with standard staples), comfortable and give a greater freedom of frame design than with traditional sinuous springs. #5 is a firmer web than #3, though both can be used on seating. Approximately 15% stretch is recommended as a cutting length guide.

400

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


3½” Jaw Webbing Stretcher 8022

#8 Wooden Webbing Stretcher 8023

TOO

Tools

WB

Webbing

#403 Goose Neck Webbing Stretcher 8024orer cilisi

• Price Breaks: Each

• Price Breaks: Each

• Price Breaks: Each

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

• Made with a hammer jaw that acts as a lever. Excellent too for stretching webbing as well as leather and canvas.

• A wooden stretcher with a corrugated rubber grip on one end and a row of six steel teeth on the other.

• Gets your hands away from the steel teeth and provides great leverage on the webbing.

Rubber Webbing Clips

SPR

Springs

CL

Clips

3028

• Price Breaks: Package / 10 • Unit of measure: Package of 100 • Another alternative for attaching webbing to frames. 2” (5.1 cm) width clips can be nailed to the frame edge to secure the webbing. Teeth punched out on the bottom of the clip will grip the webbing solidly without tearing.

Visit www.jennisfabrics.com

401


WEB

Webbing

NY

Nylon

1” Nylon Webbing • Price Breaks: Roll / 5 • Unit of measure: 100 yard/91.4 m roll • Regular 1” (2.54 cm) nylon webbing available in 100 yard (91.4 m) rolls. Break strength on this product for comparison purposes only is 1005lbs. (456 kg).

White Black Royal

1½” Nylon Webbing Black

9822

9850 9851 9844

9821 9892 9846

Olive Drab Yellow Red

2” Nylon Webbing Black

9824

• Price Breaks: Roll / 5 • Unit of measure: 100 yard/91.4 m • Break strength: 1200lbs. (544 kg)

Heavy Duty Nylon Webbing

• Price Breaks: Roll / 10 • Unit of measure: 50 yard/45.7 m roll • Break strength: ¾”: 1980lbs. (898 kg), 1”: 2390lbs. (1084 kg), 1½: 3620lbs. (1642 kg), 2”: 6920lbs. (3139 kg).

¾” Black 1” Black 1½” Black 2” Black 402

9782 9791 9792 9793

1” Royal 1” Red

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS

9794 9797


1” Sunbrella® Webbing

WEB

Webbing

SU

Sunbrella®

WEB

Webbing

PP

Polypropylene

• Price Breaks: Each • Unit of measure: 25 yard/22.9 m roll • 78% acrylic, 22% polyester Sunbrella® brand webbing. 1” (2.54 cm) width. UV minimum grade 4 at 2200 hours, when tested to the AATCC 169-2003 and minimum grade 4 at 1500 hours, when tested to the SAE 1960J.

13125 13126 13127

Pacific Blue White Jet Black

13128 13129

Cadet Grey Burgundy

Regular Polypropylene Webbing

• Price Breaks: Roll / 10 • Unit of measure: 50 yard/45.7 m roll • Regular polypropylene webbing. General purpose webbing for garment applications.

Black Burgundy Green Grey Navy Olive Orange Red Royal Silver Tan White Yellow

1”

1½”

2”

9869 9898 9905 9859 9716 9766 9852 9853 9861 9769 9874 9893

9860 9899 9903 9864 9858 9717 9767 9856 9857 9862 9770 9855 9894

9870 9900 9904 9863 9868 9718 9768 9866 9867 9878 9771 9865 9895

Visit www.jennisfabrics.com

403


WEB

Webbing

PP

Polypropylene Heavy Duty Poly Webbing

• Price Breaks: Roll / 10

#9735, #9736: Roll / 12

• Unit of measure: 50 yard/45.7 m roll • Heavy duty polypropylene webbing. The material is substantially stronger than the regular polypropylene webbing. Break strength: ¾”: 515lbs. (234 kg), 1”: 702lbs. (318 kg), 1½”: 1086lbs. (493 kg), 2”: 1428lbs. (648 kg).

¾” Black 1” Black 1½” Black 2” Black

1” 4 Panel Poly Webbing Black

9720 9733 9735 9737

1” White 1½” White 2” White

9734 9736 9738

9570 • Price Breaks: Roll / 10 • Unit of measure: 50 yard/45.7 m roll • General purpose polypropylene webbing with great aesthetics and shine for bag and apparel applications.

¾” Poly Webbing Black

9781

¾” Poly Webbing White

9780

• Price Breaks: Roll / 10 • Unit of measure: 50 yard/45.7 m roll • Regular polypropylene webbing. General purpose webbing for garment applications.

404

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


1” Polyester Tie Down Webbing 9701

2” Polyester Tie Down Webbing 9702

3” Polyester Tie Down Webbing 9703er cilisi

WEB

Webbing

PO

Polyester 4” Polyester Tie Down Webbing 9704

• Price Breaks: Roll / 5 / 10 • Unit of measure: 10 yard/9 m roll • Thick, heavy, all weather tie down webbing used on truck beds and cargo straps. Break strength for comparison purposes: 1”: 3500lbs. (1588 kg), 2”: 10000lbs. (4536 kg), 3”: 15000lbs. (6804 kg), 4”: 20000lbs. (9072 kg). These goods will work very well with the tie down ratchets and hooks on page 327. You can create custom tie downs for any configuration that you need. • Note: #9 Tufting Twine #8125 is recommended for sewing tie downs.

2” Polyester Tie Down Webbing 9706

3” Polyester Tie Down Webbing 9707

4” Polyester Tie Down Webbing 9708rer cilisi

• Price Breaks: Roll • Unit of measure: 100 yard/91.4 m roll • Thick, heavy, all weather tie down webbing used on truck beds and cargo straps. Break strength for comparison purposes: 2”: 10000lbs. (4536 kg), 3”: 15000lbs. (6804 kg), 4”: 20000lbs. (9072 kg). These goods will work very well with the tie down ratchets and hooks on page 327. You can create custom tie downs for any configuration that you need. • Note: #9 Tufting Twine #8125 is recommended for sewing tie downs.

1” Polyester Webbing White 13130

1” Polyester Webbing Black 13131

• Price Breaks: Roll / 10 • Unit of measure: 50 yard/45.7 m roll • Use for backpacks, bags, boat tops, boat covers, outdoors, and outerwear. UV resistant.

Visit www.jennisfabrics.com

405


WEB

Webbing

SE

Seatbelts 9872

Seat Belt Grey

Seat Belt Black

• Price Breaks: #9872: Roll / 3

9875

#9875: Roll / 5

• Unit of measure: Roll • 2” (5.1 cm) width seatbelt webbing material, meets MVSS302 automotive fire code. This webbing is extremely strong, with a very fine weave. Has a soft hand. It is easy to sew and is more flexible than most webbing. Sold in full rolls only; roll size: #9872: 200 yards/roll, #9875: 100 yards/roll.

TOO

Tools

CU

Cutters Heavy Duty Hot Knife

2810 • Price Breaks: Each • Unit of measure: Each • Hot knife cutter for use on vinyls, plastic, tarp materials, etc. Can also be used for cutting and sealing webbings. Runs on normal house AC current (60 watts). This unit heat up to 565°C (1050°F). It is hot enough for heavy duty work.

406

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


Compact Hot Cutter

TOO

Tools

CU

Cutters

9876

• Price Breaks: Each • Unit of measure: Each • Compact portable hot cutter heat quickly for use in cutting and sealing edges on any synthetic webbing or cord. Perfect for drawstrings, laces, tapes, cords and ropes. Actual size is 3” (7.6 cm) high, 4” (10.2 cm) wide and 5” (12.7 cm) long. This versatile unit will add a professional edge to all the cut webbings and synthetic ropes you use. The blade is replaceable.

Production Hot Cutter 9877 • Price Breaks: Each • Unit of measure: Each • This unit was designed for custom hand cutting or high speed production use. Lever type action is fast, and neatly cuts and seals all synthetic materials such as webbings, cords, etc. No further processing needed. It can be used to rim narrow fabric strips. It has a 3½” (8.9 cm) maximum cut width, and is variable heat controlled. The standard model runs on normal 110 household current, but 220 volt models are available on special order. The blade can be replaced separately.

Blade for # 9876 Compact Hot Cutter 9816

4” Replacement Element for #9877 9814

4” Replacement Blade for #9877 9813olorer cilisi

• Price Breaks: Each

• Price Breaks: Each

• Price Breaks: Set

• Unit of measure: Each

• Unit of measure: Each

• Unit of measure: Each

• Replacement blade for #9876.

• Replacement element for the Production Hot Cutter.

• Replacement blade for the Production Hot Cutter.

Visit www.jennisfabrics.com

407


ZIP

Zippers

Notes

Zipper Notes Zippers come in three basic systems: spiral (or coil), injection molded profile (delrin or Vislon for the name of the molded material) and metal.

#1 Coil

#2 Injection Molded

#3 Metal

#1 Coil Zippers: Use the toothed elements of helical coils or polyester, nylon or in some cases metal wire as the fastening system. The opposing elements of the exposed coil interlock with each other to form the closure. The coils can be formed and woven directly into the supporting tapes or preformed and sewn onto specially pre-manufactured tapes in a separate operation. These products are widely used because of their inconspicuous appearance when incorporated into the finished product. The nylon and polyester coils will not generally break an industrial sewing machine needle if stitched over, which allows bar tacking as a method to close one end of the fastener. #2 Injection Molded Zippers: Manufactured from Delrin or Vislon compounds have a larger bulk than coil zippers. These zippers have teeth of individually coupling members that interlock and are injection molded onto pre-woven dyed tape. They have a degree of self lubrication and tend to be somewhat sturdier than an equivalent size of coil zipper. They also handle water and impurities better than coil zippers and in the larger sizes are the ideal choice for outdoor topping applications such as boats and other marine fitting applications. #3 Metal Zippers: Have teeth of stamped or die cast interlocking design fastened to the beaded edge of a dyed supporting tape. They have long life and tend to be very sturdy and strong in all directions. Brass zippers are used in marine applications as they do not rust as much as steel. They are also used in applications such as garment and upholstering due to the desired brass or metal finish. Zippers are available in running yardage or cut length finished products. The finished zippers are separable like those found in jackets and other garments. The running length system allows zippers to be made up to the length required. Where needed, there are top and bottom stops available along with the sliders for the zipper tape. Which finished zipper should you use? It depends on the requirements. If strength is not a particular concern, go with whichever zipper will give you the finished appearance you want. Hidden and low profile would lead you to the coil style. If you wanted a more traditional look for a leather garment you might want a larger brass finish zipper on black tape. If strength is an issue, select the largest size that would fit the project. Metal and delrin are stronger, although the larger coil zippers are strong enough for bags and other applications. Pre-finished Zippers: Available in a large assortment of colors and length in both auto-locking or non-locking styles. Coil zipper sliders are available in locking and non-locking sliders. The locking sliders have a small tooth on the bottom of the tab that will lock into the teeth of the chain and prevent the slider from further movement until the tab is lifted.

408

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


ZIP

Zippers

AL

Aluminum

YKK #4 Aluminum Zipper Tape 9913 • Price Breaks: Yard / 273 • Unit of measure: Yard • #4 Aluminum zipper tape in a continuous roll. This size has been the industry standard for cushion zipper for decades. Easy to use and sliders mount easily. Consistent and reliable, it is available in cut lengths or in rolls of 273 yards (250 m). Tape color is a very light beige.

YKK #4 Aluminum Zipper Sliders 9916

• Price Breaks: Package / 10 • Unit of measure: Package of 100 • All aluminum single pull tab sliders to go with the aluminum zipper tape listed above. Easily mounted by hand, no tools required.

YKK #5 Aluminum Zipper Tape 9918 • Price Breaks: Yard / 109 / 436 • Unit of measure: Yard • #5 Aluminum zipper tape in a continuous roll. This is a slightly larger and stronger version of the #4 zipper. It is intended for more strenuous applications such as bags and other places where a slightly heavier load is expected. It is sold by the yard in cut lengths or in a roll of 109 yards (100 m). The tape color is a light beige.

Visit www.jennisfabrics.com

409


ZIP

Zippers

AL

Aluminum YKK #5 Aluminum Zipper Sliders 9919

• Price Breaks: Package / 10 • Unit of measure: Package of 100 • All aluminum single pull tab sliders to go with the #5 aluminum zipper tape listed on the previous page.

YKK #10 Aluminum Zipper Tape

9921 • Price Breaks: Yard / 100 • Unit of measure: Yard • Heavy #10 aluminum zipper on beige tape. This is a common size in marine, boat top and tent applications. The tape has a width of ¾” (1.9 cm). Sliders are available as well as top and bottom stops for a secure and attractive finish to this system.

#10 Aluminum 2-Tab Sliders 9922

410

#10 Aluminum Top Stop 9923

#10 Aluminum Bottom Stop 9924r cilisi

• Price Breaks: Package / 4

• Price Breaks: Package / 5

• Price Breaks: Package / 5

• Unit of measure: Package of 25

• Unit of measure: Package of 100

• Unit of measure: Package of 100

• Aluminum slider for zipper listed above. Has 2 pull tabs enabling it to be opened from either side.

• One of these stop is crimped onto the top of the tape on each side to provide a stop for the slider.

• Stop is pressed through both sets of teeth at the bottom of zipper, the prongs are crimped to form the bottom stop.

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


YKK #10 Aluminum 2-Tab Zipper 96” 9931

ZIP

Zippers

AL

Aluminum

ZIP

Zippers

BR

Brass

• Price Breaks: Each / 10 / 25 • Unit of measure: Each • Need a separable #10 aluminum zipper? This unit is available for boat top and tent applications anywhere that you might need a separable zipper. It can be shortened by trimming the free ends. They can be capped with the aluminum top stops to keep the finished professional appearance. Sold individually. We also carry a selection of these zippers in a brass finish. Beige color.

#10 2-Tab Brass Zipper Tape 36” 9932

#10 2-Tab Brass Zipper Tape 60” 9933

#10 2-Tab Brass Zipper Tape 96” 9934rer cilisi

• Price Breaks: Each / 12 / 25 • Unit of measure: Each • Pre made separable brass zippers on black ¾” (1.9 cm) tape. Ideal for outdoor use in garments, tops, bags, etc. Frequently used in leather jackets and other traditional garment applications. Brass is sturdy, attractive and handles humidity and cold easily. Can be shortened and finished with #10 top stops, #9927, page 413.

Visit www.jennisfabrics.com

411


ZIP

Zippers

BR

Brass YKK #4 Brass Cushion Zipper Tape 9911

• Price Breaks: Yard / 164 • Unit of measure: Yard • #4 brass zipper tape in a continuous roll. The brass finish is a more decorative alternative to aluminum for those applications where you want to stay with the traditional look and feel of metal zippers. The brass is strong, attractive and weatherproof. This size has been the industry standard for cushion zipper for decades. Easy to use. This is a quality product from YKK. It is available in cut lengths or in rolls of 164 yards (150 m). Tape color is light beige.

YKK #4 Brass Zipper Sliders

9915 • Price Breaks: Package / 10 • Unit of measure: Package of 100 • All brass, single pull tab slider for the zipper listed above.

YKK #10 Brass Zipper Tape

9925 • Price Breaks: Yard / 55 • Unit of measure: Yard • Heavy #10 brass zipper on black tape. This is a common size in marine and boat top applications but is also popular in tents and other shelters or heavy bag applications. The tape has a width of ¾” (1.9 cm). Sliders are available as well as top and bottom stops for a secure and attractive finish to the system.

412

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


#10 Brass 2-Tab Sliders 9926

#10 Brass Top Stop 9927

ZIP

Zippers

BR

Brass

#10 Brass Bottom Stop 9928ilisi

• Price Breaks: Package / 4

• Price Breaks: Package / 5

• Price Breaks: Package / 5

• Unit of measure: Package of 25

• Unit of measure: Package of 100

• Unit of measure: Package of 100

• Brass slider for zipper listed previously. Has 2 pull tabs enabling it to be opened from either side.

• One of these stop is crimped onto the top of the tape on each side to provide a stop for the slider.

• Stop is pressed through both sets of teeth at the bottom of zipper, the prongs are crimped to form the bottom stop.

#4 Coil Chain Zipper White 9909

#4 Coil Chain Zipper Beige 9970

ZIP

Zippers

CC

Coil Chain

#4 Coil Chain Zipper Black 9912r cilisi

• Price Breaks: Roll / 4 / 12 • Unit of measure: Yard (full rolls only) • #4 regular duty coil chain tape is an ideal zipper for cushions, inside pockets, bags or any light duty application. It has a low profile when installed and a very clean appearance either open or closed. An economical solution to a fastening need. • Available in white, beige, and black. Priced by the yard but are only available in full rolls (300 yard (274 m) per roll). Sliders are listed on the following pages.

Visit www.jennisfabrics.com

413


ZIP

Zippers

CC

Coil Chain #4 Coil Slider Non-Lock Black

9914

#4 Coil Slider Non-Lock White 9917

• Price Breaks: Package / 10 • Unit of measure: Package of 100 • Non-locking single tab sliders for #4 coil zippers. Ideal for pocket or compartment zippers.

#4 Coil Slide Pin Lock Beige 9971

#4 Coil Slide Pin Lock Black 9929

#4 Coil Slide Pin Lock White 9906

• Price Breaks: Package / 10 • Unit of measure: Package of 100 • Pin locking single tab sliders for #4 coil zippers in black, white and beige. These sliders will stay where left and not have a tendency to drift open. Two pins on the slider lock into the teeth of the chain when the tab is pressed down and stays until the tab is lifted again.

#4 Long Tab Non-LockCoil Sliders Black 9887

#4 Long Tab Non-Lock Coil Sliders White 9910

• Price Breaks: Package / 10 • Unit of measure: Package of 100 • Non-locking sliders with extra long tabs are easier to grip and move. Great for bags, pockets and other applications where the zipper may recess into the product.

414

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


#5 Coil 5/8” Zipper White 9890

#5 Coil 5/8” Zipper Black 9880

ZIP

Zippers

CC

Coil Chain

#5 Coil 5/8” Zipper Off White 11660

• Price Breaks: Yard / 200 / 1000 • Unit of measure: Yard • #5 coil tape in 3 colors. For use in sport bags, backpacks, etc. An economical, pliable, water resistant zipper. Available in cut lengths or rolls. ⅝” (1.6 cm) wide tape.

#5 Non-Lock Coil Zipper Slider White 9891

#5 Non-Lock Coil Zipper Slider Black 9879

• Price Breaks: Package / 10 • Unit of measure: Package of 100 • Non-locking sliders with a single pull tab to coordinate with the coil zippers above.

#5 Non-Lock 2-Tab Slider Black

10001

• Price Breaks: Package / 10 • Unit of measure: Package of 100 • Non-locking sliders with 2 tabs for reversible applications. Black only.

Visit www.jennisfabrics.com

415


ZIP

Zippers

CC

Coil Chain #5 Coil Locking Zipper Slider Black 11670

#5 Coil Locking Zipper Slider Off White 11682

• Price Breaks: Package / 10 • Unit of measure: Package of 100 • Locking sliders with a single pull tab to coordinate with the previous #5 coil zipper.

#8 Coil 5/8” Zipper Black

9885 • Price Breaks: Yard / 150 / 1000 • Unit of measure: Yard • A larger and stronger chain ideal for outdoor applications, moisture resistant. ⅝” (1.6 cm) width.

#8 Non-Lock Coil Slider Black

9886 • Price Breaks: Package / 8 • Unit of measure: Package of 25 • Non-locking single pull tab sliders for the #8 coil zipper tape.

416

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


#8 Coil 2-Tab Slider Black

ZIP

Zippers

CC

Coil Chain

10003

• Price Breaks: Package / 8 • Unit of measure: Package of 25 • Non-locking 2-tab sliders for the #8 coil zipper tape on previous page.

#10 Coil Zipper Chain Black

9888

#10 Coil Zipper Chain White 9999

• Price Breaks: Yard / 100 / 1000 • Unit of measure: Yard • A larger and stronger chain ideal for outdoor applications such as sleeping bags, backpacks, etc. Moisture resistant.

#10 Coil 1-Tab Slider Black 9889

#10 Coil 2-Tab Slider Black 10004

#10 Coil 2-Tab Slider White 10000cilisi

• Price Breaks: Package / 4

• Price Breaks: Package / 4

• Price Breaks: Package / 4

• Unit of measure: Package of 25

• Unit of measure: Package of 25

• Unit of measure: Package of 25

• Non-locking sliders for the #10 coil zipper tape above.

• Non-locking sliders for the #10 coil zipper tape above.

• Non-locking sliders for the #10 coil zipper tape above.

Visit www.jennisfabrics.com

417


ZIP

Zippers

CF

Coil Finished 16” #5 Coil Open End Autolock Black 11500

18” #5 Coil Open End Autolock Black 11501

20” #5 Coil Open End Autolock Black 11502

• Price Breaks: Each / 25 / 100 • Unit of measure: Each • Pre made #5 zippers. Available in 3 sizes from 16” (40.6 cm) to 20” (50.8 cm). These are auto lock zippers, so the sliders stay put until the tab is lifted and the slider is moved. Economical and useful fastening system for your customers. #5 coil has flat, low profile that will not intrude into fashion designs.

6” #5 Coil Closed End Autolock Black 11609

7” #5 Coil Closed End Autolock Black 11610

9” #5 Coil Closed End Autolock Black 11612

10” #5 Coil Closed End Autolock Black 11613

• Price Breaks: Each / 25 / 100 • Unit of measure: Each • These closed end zippers were designed with garment and bag pockets in mind. They have one end closed and do not separate. They match exactly to the black coil zipper listed previously and can save time on the production line.

418

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


#5 Delrin Chain Zipper Black

11400

ZIP

Zippers

DC

Delrin Chain

#5 Delrin Chain Zipper Off White 11412

• Price Breaks: Yard / 200 / 1000 • Unit of measure: Yard • #5 Delrin tape for use in sport bags, backpacks, etc. An economical, pliable, water resistant zipper. Available in cut lengths or rolls.

#5 Delrin Locking Zipper Slider Black 11420

#5 Delrin Locking Zipper Slider Off White 11432

• Price Breaks: Package / 10 • Unit of measure: Package of 100 • Locking sliders with a single pull tab to coordinate with the previous Delrin zipper.

Visit www.jennisfabrics.com

419


ZIP

Zippers

DF

Delrin Finished #5 Delrin Open End Autolock Black • Price Breaks: Each / 25 / 100 • Unit of measure: Each • Pre made #5 Delrin zipper, open end with autolock slider. Used in garments and bag applications.

16” 18” 20” 24”

11300 11301 11302 11306

26” 28” 30” 40”

11308 11310 11312 11448

10” #5 Delrin Closed End Autolock Black 11467 • Price Breaks: Each / 25 / 100 • Unit of measure: Each • These closed end zippers were designed with garment and bag pockets in mind. They have one end closed and do not separate. They match exactly to the black Delrin zipper listed previously and can save time on the production line.

420

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


ZIP

Zippers

LE

Lenzip

Lenzip #10 Autolock • Price Breaks: 18”-66”: Each / 10 / 25 72”: Each / 10 / 20 78”-120”: Each / 10 • Unit of measure: Each • These plastic Delrin zippers have individually injected molded teeth, fused directly onto the tape of the zipper. The resins used to manufacture the molded plastic chain are incredibly strong. Ideal for many medium and heavy weight garments or any outdoor application. Auto locking sliders are assembled with a small pin that nestles between the teeth on the zipper chain. This locking pin prevents the zipper from opening until the slider tab is pulled, thereby retracting the locking pin and enabling the slider to move freely up and down the zipper chain.

18” Black 24” Black 30” Black 36” Black 42” Black 48” Black 54” Black 60” Black 66” Black 72” Black 78” Black 84” Black 96” Black 108” Black 120” Black

11074 11076 11078 11080 11082 11084 11086 11088 11090 11094 11097 11100 11103 11105 11107

18” White 24” White 30” White 36” White 42” White 48” White 54” White 60” White 66” White 72” White 78” White 84” White 96” White 108” White 120” White

11073 11075 11077 11079 11081 11083 11085 11087 11089 11092 11096 11098 11102 11104 11106

Lenzip #8 Delrin Autolock Black • Price Breaks: 24”-60”: Each / 10 / 25

72”-120”: Each / 10 / 20

• Unit of measure: Each • Plastic Delrin zippers have individually injected molded teeth, fused directly onto the tape of the zipper. Molded plastic chain is incredibly strong. Ideal for many medium and heavy weight garments or any outdoor application. Auto locking sliders prevents the zipper from opening until the slider tab is pulled.

24” 36” 48” 60”

11108 11109 11110 11111

72” 84” 96” 108” 120”

11112 11113 11114 11116 11118

Visit www.jennisfabrics.com

421


ZIP

Zippers

VC

Vislon Chain

Zipper Notes YKK Vislon zipper is extremely strong and lightweight. The “teeth” are made from Vislon nylon and the tape is polyester. Due to the unique properties of Vislon, the fastener has a wide variety of industrial, consumer and military applications where environmental conditions can reduce the effectiveness of metal zippers. It is corrosion resistant. The zipper is self lubricating to a degree and operates smoothly despite sand, mud or other contaminants. The color is cast into the molding, so there is no finish to rub off, peel or chip. Vislon has excellent heat resistance (up to 182°C (360°F)), and resistance to cold (down to -51°C (-60°F)). It melts at 249°C (480°F), which is well beyond normal laundering or exposure temperatures. Resistance to chemicals further extends the use of Vislon beyond the scope of conventional metal zippers which are prone to accelerated corrosion with exposure to chemicals. Vislon is a consistent, quality product from YKK Canada.

YKK #5 Vislon Zipper White 9975

YKK #5 Vislon Zipper Black 9935

YKK #5 Vislon Zipper Beige 10082

• Price Breaks: Yard / 220 / 660 • Unit of measure: Yard • YKK uses the brand name Vislon for its premium line of delrin zippers. The zipper has long been used in lighter outdoor applications. Vislon takes weather well, is unaffected by moisture, does not support rot or mildew and has a clean, attractive appearance. We carry this product in cut lengths or rolls of 220 yards (218.7 m). The #5 tape is ½” (1.3 cm) in width.

YKK #5 Vislon Zipper Slider White 9990

YKK #5 Vislon Zipper Slider Black 9936

YKK #5 Vislon Zipper Slider Beige 10083rer cilisi

• Price Breaks: Package / 10 • Unit of measure: Package of 100 • Non-locking sliders with a single pull tab to go with the #5 zipper listed above.

422

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


YKK #5 Vislon 2-Tab Zipper Slider White 9980

ZIP

Zippers

VC

Vislon Chain

YKK #5 Vislon 2-Tab Zipper Slider Black 9930

• Price Breaks: Package / 10 • Unit of measure: Package of 100 • Non-locking sliders with a double pull tab to go with the #5 zipper listed on previous page.

YKK #5 Vislon Top Stops White 9982

YKK #5 Vislon Top Stops Black 9937

YKK #5 Vislon Top Stops Beige 10084r cilisi

• Price Breaks: Package / 10 • Unit of measure: Package of 100 • Top stops for the #5 zipper are crimped into place to limit movement of the slider.

YKK #5 Vislon Bottom Stops White 9984

YKK #5 Vislon Bottom Stops Black 9938

YKK #5 Vislon Bottom Stops Beige 10085r cilisi

• Price Breaks: Package / 10 • Unit of measure: Package of 100 • Bottom stops for the #5 zipper are crimped into place to limit movement of the slider.

Visit www.jennisfabrics.com

423


ZIP

Zippers

VC

Vislon Chain

YKK #10 Vislon Chain White 9940

YKK #10 Vislon Chain Black 9939

YKK #10 Vislon Chain Blue 9943

YKK #10 Vislon Chain Beige 10075

• Price Breaks: Yard / 110 • Unit of measure: Yard • YKK used the brand name Vislon for its premium line of delrin zippers. This zipper is the heavy one found in marine convertible tops and tenting applications. Vislon takes weather well, is unaffected by moisture, does not support rot or mildew and has a clean, attractive appearance. We carry this product in cut lengths or rolls of 110 yards (100.6 m). The #10 tape is ⅝” (1.6 cm) in width.

YKK #10 Vislon Slider White 9941

YKK #10 Vislon Slider Black 9947

YKK #10 Vislon Slider Beige 10078r cilisi

• Price Breaks: Package / 4 • Unit of measure: Package of 25 • Non-locking sliders with a single pull tab to go with the #10 zipper tape listed above.

424

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


YKK #10 Vislon 2-Tab Slider White 9946

YKK #10 Vislon 2-Tab Slider Black 9942

YKK #10 Vislon 2-Tab Slider Blue 9944l

ZIP

Zippers

VC

Vislon Chain YKK #10 Vislon 2-Tab Slider Beige 10079

• Price Breaks: Package / 4 • Unit of measure: Package of 25 • Non-locking sliders made of enamelled steel with a double pull tab to go with the #10 zipper tape listed previously.

YKK #10 Locking 2-Tab Slider White 9972

YKK #10 Locking 2-Tab Slider Black 9974

YKK #10 Locking 2-Tab Slider Beige 10076r

• Price Breaks: Package / 4 • Unit of measure: Package of 25 • Locking sliders with a double pull tab to go with the #10 zipper tape.

9976 YKK #10 Plastic 2-Tab Slider White

YKK #10 Plastic 2-Tab Slider Black 9945

• Price Breaks: Each / 10 • Unit of measure: Each • Non-rusting locking plastic sliders for salt water and other marine applications. Molded in color. Will not rust even if chipped.

Visit www.jennisfabrics.com

425


ZIP

Zippers

VC

Vislon Chain

YKK #10 Vislon Top Stops White 9948

YKK #10 Vislon Top Stops Black 9965

YKK #10 Vislon Top Stops Beige 10081

• Price Breaks: Package / 10 • Unit of measure: Package of 100 • Top stops for the #10 zipper are crimped into place to limit movement of the slider.

YKK #10 Vislon Bottom Stops White 9949

YKK #10 Vislon Bottom Stops Black 9966

YKK #10 Vislon Bottom Stops Beige 10080

• Price Breaks: Package / 10 • Unit of measure: Package of 100 • Bottom stops for the #5 zipper are crimped into place to limit movement of the slider.

426

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


YKK #8 Vislon Locking Zipper

ZIP

Zippers

VF

Vislon Finished

• Price Breaks: Each / 10 / 25 • Unit of measure: Each • Separable locking #8 Vislon zippers in two colors from YKK. These zippers have double pull sliders on them with the locking tooth.

24” Black 36” Black 48” Black 54” Black 60” Black 72” Black 84” Black

10086 10015 10016 10087 10017 10088 10089

36” White 48” White 60” White

10018 10019 10020

YKK #10 Non-Locking Vislon Zipper • Price Breaks: Each / 10 / 50 • Unit of measure: Each • #10 non-locking zipper with double pull tab slider. ⅝” (1.6 cm) tape.

18” Black 24” Black 30” Black 36” Black 42” Black 48” Black 54” Black 60” Black 66” Black 72” Black 78” Black 84” Black 96” Black 108” Black 120” Black

9470 9991 9989 9992 9471 9993 9472 9994 9473 9995 9474 9996 9997 9475 9998

18” White 24” White 30” White 36” White 42” White 48” White 54” White 60” White 66” White 72” White 78” White 84” White 96” White 108” White 120” White

9450 9959 9969 9960 9451 9961 9452 9962 9453 9963 9454 9964 9967 9455 9968

Visit www.jennisfabrics.com

18” Beige 24” Beige 30” Beige 36” Beige 42” Beige 48” Beige 54” Beige 60” Beige 66” Beige 72” Beige 78” Beige 84” Beige 96” Beige 108” Beige 120” Beige

10060 10061 10062 10063 10064 10065 10066 10067 10068 10069 10070 10071 10072 10073 10074

427


ZIP

Zippers

VF

Vislon Finished YKK #10 Vislon Locking Zipper • Price Breaks: Each / 10 / 50 • Unit of measure: Each • #10 locking zipper with double pull tab slider. ⅝” (1.6 cm) tape. This zipper is the heavy one found in marine convertible tops and tenting applications.

18” Black 24” Black 30” Black 36” Black 42” Black 48” Black 54” Black 60” Black 66” Black 72” Black 78” Black 84” Black 96” Black 108” Black 120” Black

428

10024 10005 10006 10007 10025 10008 10026 10009 10027 10010 10028 10011 10012 10029 10013

18” White 24” White 30” White 36” White 42” White 48” White 54” White 60” White 66” White 72” White 78” White 84” White 96” White 108” White 120” White

10039 9977 9978 9979 10040 9981 10041 9983 10042 9985 10043 9986 9987 10044 9988

18” Beige 24” Beige 30” Beige 36” Beige 42” Beige 48” Beige 54” Beige 60” Beige 66” Beige 72” Beige 78” Beige 84” Beige 96” Beige 108” Beige 120” Beige

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS

10045 10046 10047 10048 10049 10050 10051 10052 10053 10054 10055 10056 10057 10058 10059


ZIP

Zippers

VF

Vislon Finished

24” Blue 30” Blue 36” Blue 48” Blue 60” Blue 72” Blue 84” Blue 96” Blue 120” Blue

9950 9951 9952 9953 9954 9955 9956 9957 9958

YKK #10 Vislon Zipper • Price Breaks: Each / 10 / 25 • Unit of measure: Each • #10 locking zipper with double pull tab slider. ⅝” (1.6 cm) tape. This zipper is the heavy one found in marine convertible tops and tenting applications.

24” Grey 30” Grey 36” Grey 48” Grey 60” Grey 72” Grey 84” Grey 96” Grey 120” Grey

10030 10031 10032 10033 10034 10035 10036 10037 10038

24” Burgundy 30” Burgundy 36” Burgundy 48” Burgundy 60” Burgundy 72” Burgundy 84” Burgundy 96” Burgundy 120” Burgundy

10090 10091 10092 10093 10094 10095 10096 10097 10098

Visit www.jennisfabrics.com

429


ZIP

Zippers

JE

JEF Zip JEFZip #10 Marine Chain White

10166

JEFZip #10 Marine Chain Black 10170

• Price Breaks: Yard / 100 • Unit of measure: Yard • Nylon tooth zippers are strong and lightweight. They operate smoothly despite the presence of sand, mud or other contaminants. They are ideal for topping and other outdoor applications including garments and bags.

JEFZip #10 Marine Sliders 2-Tab White 10168

JEFZip #10 Marine Slider 2-Tab Black 10172

• Price Breaks: Package / 4 • Unit of measure: Package of 25 • Non locking 2-tab slider for use with the JEFZip #10 marine chain above.

430

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


Color Index

AER

Aerosols

Color Index This section features color images or color matches for products in the catalogue. Please refer back to the page number listed for more information about the product. Images have been carefully digitized to show color and texture (when applicable). As printed sampling can vary, we recommend that you obtain actual samples when available to ensure accuracy. Please contact your sales professional, visit our showroom or call our Customer Service Centre for more information. All colors are subject to dye lot changes. This is normally only evident when trying to match an existing piece. If you need to match a dye lot exactly, please provide us with a sample you are matching and we will get you the closest possible match. Due to the nature of numerous different computer display and printer settings, the color swatches displayed may not represent the actual product in its entirety. All supplied fabric and supply images in their printed form are to be used for reference only and may not look exactly as shown.

Vinyl Coat

9610

Page 40

9622

9616

9611

Spray Stain

9680

9682

9601

9606

9640

9668

9604

9614

9663

9599

9673

9636

9600

9658

9662

9689 9678 Gloss, Bus & Marine Colours

9597

Page 48

7181

7185

7193

7195

7178

7188

7189 7191 7194

7179

7183

7180

7197

7221

Visit www.jennisfabrics.com

431


Color Index

BIN

Binding

Sunbrella速 Double Fold Binding Page 82

Navy 4751, 4748

Pacific 4739, 4746

Captain Navy 4738, 4754

Capri 4974

Toast 4963, 4765

Taupe 4767

Toast Tweed 4964, 12011

Marine Blue Mediterranean Mediterranean 4976, 4999 Blue 4967, 4762 Blue Tweed 4959, 4981

Sapphire 4956, 4759

Dubonnet Tweed Burgundy 4957, 4769 4743, 4757

Persian Green 4958, 4985

Red 12012, 4953

Linen 4966, 4775

Royal Blue 12013, 4771

Fern 4970, 4982

Ocean Blue 4977

Forest 4961, 4755

Sunflower Yellow Wheat 4954 4973, 4503

Hemlock 4965, 4760

Brass 4969, 4989

Beige 4779

Heather Beige 4971, 4979

Cocoa 4975, 4998

True Brown 12014, 4776

Cadet Grey 4962, 4773

Silver 4968, 4774

Oyster 4960, 4761

Natural 4740, 4747

Linen Tweed 4741, 4758

Page 83

4926 Captain 4934 Navy 4938 Mediter- 4927 Pacific Navy ranean Blue Blue

4952 Taupe 4950 True Brown

Spa 4972, 4980

Logo Red 4955

Black Charcoal Tweed Charcoal Grey 4742, 4749 4778 4777

Sunbrella速 Centerfold Binding

432

4942 Turquoise

4932 Forest Green

4947 Concord

4937 Burgundy

4936 Beige 4930 Linen 4935 Cadet 4978 Oyster 4939 Natural 4929 White Grey

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS

4946 Red

4931 Jet Black


Para Awning Binding Tape

0015 White

0926 Driftwood

0052 Beige

0014 Tan

0057 Chocolate 0930 Hazelnut

0098 Fire

0058 Copper

0007 Khaki

0097 Graphite 0075 Midnight Blue 0087 Denim

Vinyl Bias Binding

Color Index

BIN

Binding

Page 85

0151 Ivory

0011 Ruby

1481 Tan/Brown 0094 Stainless Steel 0929 Vanilla

0012 Yellow

0005 Forest

0073 Burgundy

0024 Black

0084 Rust

0081 Dark Brown

0010 Navy Blue 0013 Royal Blue

0079 Grey

Page 87

4940 White

5004 Black

4948 Off White

5008 Grey

5009 Almond

5010 Charcoal

4943 Camel

4945 Maroon

Visit www.jennisfabrics.com

4944 Blue

433


Color Index

BIN

Binding

Double Fold TopGun Binding 1â&#x20AC;?

Page 90

4903 Forest Green 4902 Turquoise

4904 Navy

4905 Onyx Black 4908 Hemp Beige 4907 Burgundy

Color Index

THR

Thread

4906 White

Page 314 - 315

Star Ultra

434

4901 Caribbean Blue

Black

White

Pacific Blue

Cadet Grey

Jockey Red

Toast

Navy

Forest Green

Burgundy

Olive Drab

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


Koban Dual Duty

Color Index

THR

Thread

Page 315 - 316

White

Black

Natural

Olive Green

Dark Green

Grey/Smoke

Royal

Navy

Red

Brown

Yellow

Chestnut

Light Brown

Burgundy

Beige

Sky Blue

Slate

Apple Red

Steel

Dove Grey

Light Grey

69 Nylon 8114 White

Page 316

8158 Black 8161 Orange 8162 Bronze

8166 Royal 8163 Willow Green

8170 Red

8171 Natural

8172 Deer

8173 Dark Beige

8179 Mahogany

8180 Light Grey

8181 Dark Grey

8182 8184 Medium 8185 Emerald Off White Brown Green

8360 Olive Drab

8363 Light Blue

CSB207 Hand Sewing

8366 Blue-Grey

8174 Light Brown

8371 Purple

8175 Sand

8375 Brown 62

8167 Dark Blue

8169 Burgundy

8177 Brown 61

8176 Walnut Brown

8357 Sea Green

8359 Hunter Green

8178 8377 Charcoal Dark Brown

Page 318

8501White

8503 Black 8533 Chestnut

Visit www.jennisfabrics.com

435


Color Index

THR

Thread

#50 Spectrum

Page 320

11701 Black

11705 Royal

11750 Black

11753 Ruby Tone

11751 Tan

Sunguard Bonded Poly

Sunglow

Oyster

Cardinal

Pearl Grey

11752 Camel

11762 Off White

11763 Beige

11764 White

Page 323 - 326

Sand

Beaver

Mocha

Burgundy Black Cherry Dark Rose

Mediterranean Adriatic Blue Dusk Blue

436

11715 White

Page 320

#70 Spectrum

White/Natural

11713 Off White

Navy

Beige

Saddle

Sunflower

Concord

Taupe

Bay Brown

Blue Wave Pacific Blue

Dark Teal Ocean Green Shamrock Forest Green Dark Olive

Shark Grey Med. Titanium Med. Opal

Charcoal

Graphite

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS

Black


Color Index

TRI

Trimmings

Scroll Gimp (continued on next page) Page 380

A01 White B01 Natural C01 Kasha C02 Oatmeal

C03 Shell C04 Grain C05 Pink Dawn

C06 Ecru C07 Dark C11 Oyster Sand

C12 Sand- C14 Dawn C15 Vanilla C16 Ala- C17 Cream C19 Off C21 Parch- C22 Wheat C23 Pebble C25 Ivory stone baster White ment

C29 Taupe D01 Cham- D03 Coin pagne Gold

D05 Old D06 An- D17 Pale D22 Beach- D24 Har- D25 Gold D26 Maize Gold tique Gold Banana wood vest Gold

E02 Seal E03 Brown E11 Bark E14 Straw E15 Burnt E16 Camel E18 Mocha E20 ToBrown Brown Toast bacco

E29 Bison H07 Egg- H12 Dusty H13 Black J01 Cherry plant Grape Rum

J19 Chinese J20 Dark Red Claret

J04 Red J11 Maroon J15 Black Cherry

E24 Light E26 Auburn Brown

J16 Ruby

J18 Wine

J23 Claret K19 Rust K28 Cop- K32 Sandal K33 Crim- K35 Dark K50 Terra per son Rust Cotta

L05 Avocado

L26 Cela9628 L28 Arti- L39 Hunter L41 Surf don Chartreuse choke Green

L43 Leaf Green

L48 Sea Mist

L49 Sage

L50 Doric L52 Black L58 Branch L60 Alpine L62 Honey L77 Cedar L79 Loden L80 Beaver Khaki Olive Dew Green

M17 Aquatic

9620 Peacock

M42 Dark M45 French M51 Dan- M52 Mid- M53 Me- M56 Pitch P05 Me- R01 Black Navy Blue ube night dium Blue dium Grey

Visit www.jennisfabrics.com

L44 Dark L46 Seacrest L47 Green Green Mist

437


Color Index

TRI

Trimmings

Scroll Gimp (continued) Page 380

S21 Light W41 Choco- Y01 Metal- Y05 Straw- Y04 Garden Y28 AnRose late Cherry lic Snow berry tique

YG2 Star Night

PR03 Ha- PR07 Hon- PR08 Latté PR10 Aqua- PR11 Pearl PR12 Perizelnut ey Suckle marine dot

PR15 Sunset

PRA2B Carnival

PR02 Flambé

PR16 Co- PR17 Sum- PR21 Descoa Praline mer Daze ert Sand

PR22 Very PR23 Tux- PR24 UltraBerry edo suede

438

PR01 Dremsicle

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


Index

A-C

Catalogue Index

B

3 Prong Clip.................................................................. 275 303 Cleaner/Spot Remover............................................ 107 303 Fabric Cleaner......................................................... 108 303 High Tech Fabric Guard......................................... 42 303 Patio Furniture Cleaner........................................... 108 303 Patio Furniture Protectant...................................... 108 303 Protectant............................................................... 41

Bindings (continued)..................................................... 82 Topline Automotive.......................... 86 Twill Tape......................................... 88 Vinyl Bias......................................... 87 Wire On........................................... 89 Blush Eraser................................................................... 49 Boat Cleaners/Protectants.............................................. 102 Boat Fittings.............................................................see Fittings Bolsters (cushions)......................................................... 264 Bow Sockets.................................................................. 170 Batton Socket White........................ 176 Chrome............................................ 170 Black Delrin (nylon)......................... 173 Rail Socket White............................. 176 Buckles.......................................................................... 52 Delrin (nylon).................................. 52 Metal................................................ 55 Burlap............................................................................ 240 Buttons.......................................................................... 91 Cutters.............................................. 101 Dies.................................................. 100 Miscellaneous................................... 99 Upholstery........................................ 93 BW Edgewire Clips....................................................... 275

A

Adhesives....................................................................... 24 Aerosols............................................ 25 Bulk.................................................. 28 Aerosols......................................................................... 38 Cleaners............................................ 39 Miscellaneous................................... 48 Protectants........................................ 41 Silicones............................................ 46 Stains................................................ 48 Vinyl Coat........................................ 40 Air Tackers..................................................................... 287, 372 Aluminum Awning Fittings........................................... 154 Antique Nails................................................................ 291 Aqua-Tite Green Water Repellent.................................. 44 Automotive Binding...................................................... 86 Automotive, Tools......................................................... 332 Awning Binding............................................................ 82

B

Bag Hardware................................................................ 50 Buckles............................................. 52 D-rings............................................. 57 Hooks............................................... 62 Loops................................................ 72 Miscellaneous................................... 71 O-rings............................................. 61 Pads.................................................. 71 Slides................................................ 67 Surcingles......................................... 73 Triangles........................................... 74 Bases.............................................................................. 76 Office................................................ 79 Rocker.............................................. 77 Van................................................... 80 Behlen Stains................................................................. 48 Bendarc速........................................................................ 189, 376 Binding Folders............................................................. 89, 348 Bindings........................................................................ 82 Centerfold (acrylic)........................... 83 Felt................................................... 84 Grosgrain (nylon)............................. 84 Para (awning, acrylic)........................ 85 Sunbrella速 (acrylic)............................ 82 Top Gun (polyester).......................... 90

C

Canvak Canvas Preservative........................................... 43 Canvas Clips.................................................................. 152 Cardboard Sheets........................................................... 257 Cardboard Tacking Strips.............................................. 295 Castors.......................................................................... 235 Centerfold Binding........................................................ 83 Chair Hub, nylon.......................................................... 79 Chalk............................................................................ 258 Cleaners......................................................................... 102 Acrylic Fabric Cleaner....................... 108 Crypton速........................................... 109 Iosso................................................. 104 Marine Window................................ 106 Protectants........................................ 102 Spot Lifter......................................... 107 Stamoid速........................................... 113 Strataglass......................................... 112 Vinyl Cleaner.................................... 106 Clear Coating................................................................ 40 Clips, Canvas................................................................. 152 Clips, Spring.................................................................. 275 Closed Cell Foam.......................................................... 199 Cockpit Pole Hardware.................................................. 184 Coil Zipper.................................................................... 413 Common Sense Fasteners, Delrin.................................. 127 Common Sense Fasteners, Metal................................... 125 Common Sense Tools.................................................... 126, 342 Compressor Accessories................................................. 333

Visit www.jennisfabrics.com

439


Index

C - F

C

F

Connector, Sectional Furniture...................................... 216 Convertible Windows.................................................... 193 Cooley Magic................................................................ 48 Cords............................................................................. 114 Awning............................................. 114 Draw String...................................... 115 Locks................................................ 116 Rope................................................. 117 Shock................................................ 118 Twine................................................ 121 Cotton Webbing............................................................ 399 Cruiser Grommets......................................................... 217 Crypton® Cleaners......................................................... 109 Crypton® Care Upholstery Brush................................... 111 Cushion Filling Machine............................................... 359 Cushion Inserts.............................................................. 255 Cushion Wrap............................................................... 269 Cutters.......................................................................... 335 Fabric................................................ 335 Foam................................................ 338 Synthetic materials............................ 335 Webbing........................................... 335

Fabri Guard................................................................... 42 Fabric Cutter................................................................. 335 Fasteners........................................................................ 124 Baby Dura Snap................................ 142 Common Sense................................. 125 Dot® Durable.................................... 137 Dura Snap Brass............................... 132 Dura Snap Steel................................ 135 Industrial.......................................... 152 Klip, Easy.......................................... 153 Lift-the-Dot...................................... 141 Miscellaneous................................... 132 Pull-the-Dot..................................... 140 Quick-Fit.......................................... 150 Rivets................................................ 129 Sample.............................................. 157 Screws............................................... 129 StayPut............................................. 151 Feather Bed................................................................... 256 Felt Padding.................................................................. 251 Fittings.......................................................................... 154 Aluminum........................................ 154 Awning............................................. 160 Chrome............................................ 162 Clips................................................. 166 Delrin, Black.................................... 166 Delrin, White................................... 170 Hinges.............................................. 192 Hooks............................................... 192 Kits................................................... 190 Miscellaneous................................... 186, 193 Stainless Steel.................................... 173 Tent Pole.......................................... 184 Tubing.............................................. 187 Vent.................................................. 165 Welt.................................................. 196 Windows.......................................... 193 Foam............................................................................. 197 Chip Foam....................................... 200 Closed Cell....................................... 199 Curon (East)..................................... 213 Duron (West)................................... 203 K126................................................ 209 Mattress............................................ 207 Miscellaneous................................... 199, 211 Qualux............................................. 210, 214 R45.................................................. 201, 207 Rebond............................................. 205, 212 Regular......................................200, 206, 215 Seating.............................................. 201 Supersoft........................................... 205, 212 Ultracell............................................ 209, 211

D

D-rings.......................................................................... 57 Dacron Polyester Padding.............................................. 247 Deck Padding................................................................ 252 Decking......................................................................... 239 Decorative Nails............................................................ 289 Display Dots (Velcro®)................................................... 395 Dot® Fasteners............................................................... 125 Baby Dura Snap ............................... 142 Common Sense................................. 125 Dura Snap........................................ 132 Lift-the-Dot...................................... 141 Pull-the-Dot..................................... 140 Dowels.......................................................................... 216 Down Comforters......................................................... 261 Draw Strings................................................................. 115 Drop In Coil Units........................................................ 280 Dura Snap Fasteners...................................................... 132 Dura Snap Tools............................................................ 342

E

EasyKlip........................................................................ 153 Edge Roll....................................................................... 381 Edge Wire...................................................................... 281 EK Clip......................................................................... 275 Elastic............................................................................ 122 Knit.................................................. 122 Woven.............................................. 123 Enbond......................................................................... 239 EZE Cushion Filling Machine....................................... 359

440

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


Introduction

F-N

F

K

Frames........................................................................... 216 Dowels.............................................. 216 Miscellaneous................................... 216 Furniture Webbing........................................................ 400

Klear-to-Sea Cleaner...................................................... 106 Kits, Fittings.................................................................. 190 Kits, Tools..................................................................... 353 Knives........................................................................... 353

Germicidal Cleaner........................................................ 106 Gimp, Hydem............................................................... 388 Gimp, Scroll.................................................................. 380 Glides............................................................................ 232, 238 Grommets..................................................................... 217 Cruiser.............................................. 217 Miscellaneous................................... 224 Osborne............................................ 219 Self Piercing...................................... 222 Tools................................................. 348 Grip Slip Paintable Silicone........................................... 46 Grosgrain Binding......................................................... 84

Landau Underpad.......................................................... 199 Legs............................................................................... 226 Ball & Claw...................................... 226 Back Leg........................................... 226 Bun................................................... 228 Castors.............................................. 235 Contour............................................ 229 Glides............................................... 238 Hanger.............................................. 237 Metal................................................ 234 Miscellaneous................................... 230 Plastic............................................... 232 Protector........................................... 233 Queen Anne..................................... 227 Round.............................................. 230 Tapered............................................. 231 T-nuts............................................... 237 Triangle Shape.................................. 235 Linings.......................................................................... 239 Burlap............................................... 240 Decking............................................ 240 Enbond............................................. 239 Quilted............................................. 241 Skirt.................................................. 241 Typar................................................ 239 Lift-the-Dot................................................................... 141 Loops............................................................................ 72

G

H

Hammers....................................................................... 351 Hand Held Steamer....................................................... 369 Hanger, Sample............................................................. 157 Heavy Duty Nylon Webbing......................................... 402 Heavy Duty Polypropylene Webbing............................. 404 Hide-a-Bed.................................................................... 216, 281 Hinges........................................................................... 192 Hinge Link.................................................................... 274 Hog Rings..................................................................... 273 Holofil........................................................................... 248 Hook and Loop Fasteners.............................................. 390 Hooks, Tie Down.......................................................... 328 Hooks, Snap Delrin (nylon).......................................... 62 Hooks, Metal................................................................. 64 Horse Blanket Hardware............................................... 73 Hot Air Heat Gun......................................................... 351 Hot Air Welder.............................................................. 378

I

Iosso速............................................................................. 102 E-Z Snap Lubricant.......................... 39, 103 Metal Polish...................................... 105 Mildew Stain Remover...................... 104 Safe-T-Solve...................................... 105 Seam Sealer....................................... 45, 102 Tier Display...................................... 104 Water Repellent................................ 45, 102 Ink Remover Leather/Vinyl, Crypton速........................... 111

J

Jay Flex Padding............................................................ 249 JEF Beam...................................................................... 193 JEF Bond...................................................................... 31 Jute Webbing................................................................. 399

L

M

Mallets.......................................................................... 355 Marine Adhesive Transfer Tape...................................... 308 Marine Cleaners............................................................ 102 Marine Fittings.............................................................. 162 Marine Foam................................................................. 199 Mattress......................................................................... 282 Metal Tacking Strips...................................................... 296 Mildew/Stain Remover.................................................. 104 Mundial Shears.............................................................. 261

N

Nail Back Buttons......................................................... 96 Nails, Decorative........................................................... 289 Nail Strip....................................................................... 295 Needles.......................................................................... 242 Curved.............................................. 242 Regulators......................................... 243 Straight............................................. 243 Tufting.............................................. 244

Visit www.jennisfabrics.com

441


Index

N - S

N

R

No Fray Spray................................................................ 43 Nylon Webbing............................................................. 402

Replacement Springs (rockers)....................................... 78 Repp Wire On Binding................................................. 89 Rings, D-....................................................................... 57 Rings, O-....................................................................... 61 Rings, Sample................................................................ 157 Rivet Gun...................................................................... 132, 364 Rocker Bases.................................................................. 77 Rope, Polypropylene...................................................... 119 Rubber Webbing Clip.................................................... 284, 416 Rulers............................................................................ 260

O

O-rings.......................................................................... 61

P

Padding......................................................................... 246 Bolster............................................... 256 Comforter Inserts............................. 253 Cushion Inserst.................................255 Deck................................................. 252 Feather Bed....................................... 256 Felt................................................... 251 Fiber................................................. 249 Jay Flex............................................. 249 Pillow Inserts.................................... 254 Terylene............................................ 246 Thinsulate™....................................... 250 Pattern Making.............................................................. 257 Cardboard........................................ 257 Chalk................................................ 258 Pens.................................................. 257 Pins.................................................. 259 Rulers............................................... 260 Pillow Inserts................................................................. 254 Pins............................................................................... 259 Piping Tins.................................................................... 252, 362 Pivot Back Buttons........................................................ 97 Pliers, Clip..................................................................... 367 Pliers, Hog Ring............................................................ 352 Pliers, Wire Cutters....................................................... 340 Pneumatic Staplers........................................................ 287, 372 Pneumatic Staple Remover............................................ 372 Polypropylene Webbing................................................. 403 Pressure Sensitive Hook & Loop................................... 394 Pressure Sensitive Velcro®............................................... 398 Prong Buttons............................................................... 93 Propex Webbing............................................................ 400 Protectant, 303.............................................................. 41 Protectant, 303 High Tech Fabric Guard....................... 42 Protectant, Aqua-Tite.................................................... 44 Protectant, Fabri Gard................................................... 42 Protectant, Scotchguard................................................. 41

Q

Queen Anne Legs.......................................................... 227 Quick-Fit Fasteners........................................................ 150

R

Ratchets........................................................................ 327 Recliner Mechanisms..................................................... 279 Reflective Trim.............................................................. 301 Regulators...................................................................... 243

442

S

S-hooks......................................................................... 121 Sample Book Rings....................................................... 157 Sand Free....................................................................... 39 Sanding Sealer................................................................ 49 Scotchguard................................................................... 41 Scotchlite™ Reflective Trim............................................ 300 Screws (wood)............................................................... 129 Scroll Gimp................................................................... 380 Seat Belts....................................................................... 81 Seat Belt Bracket............................................................ 80 Seat Belt Webbing......................................................... 406 Seat Sliders.................................................................... 80 Sectional Connector...................................................... 216 SEM Vinyl Coat............................................................ 40 Shears............................................................................ 261 Pinking............................................. 263 Quick Clip........................................ 265 Straight............................................. 261 Tools................................................. 266 Shear Sharpener............................................................. 266, 364 Shock Cord (bungee cord)............................................. 118 Shock Cord Fasteners.................................................... 119 Shoulder Pads (webbing)............................................... 71 Silicone.......................................................................... 46 Skewers.......................................................................... 259 Skirt Lining................................................................... 241 Slides, Delrin................................................................. 67 Slides, Metal.................................................................. 70 Snap Rings (button molds)............................................ 96 Spot Lifter...................................................................... 107 Spray Coating Vinyl...................................................... 40 Springs.......................................................................... 267 Clips................................................ 275 Coil.................................................. 267 Hide-a-Beds...................................... 281 Links................................................ 274 Miscellaneous................................... 274 Recliner Mechanism......................... 279 Sinuous............................................. 268 Tools................................................. 276 Units................................................. 280 Wire................................................. 272

Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


Index

S-T

S

T

Stains (aerosol).............................................................. 48 Stainless Steel, Boat Rail Fittings................................... 180 Stainless Steel, Boat Top Fittings................................... 173 Stainless Steel, Snap Fasteners........................................ 136 Stamoid® Cleaners......................................................... 113 Staplers (tackers)............................................................ 287, 382 Staples........................................................................... 284 1400 series........................................ 284 71 series............................................ 285 Duo-Fast........................................... 287 Stainless Steel.................................... 285 StayPut.......................................................................... 151 Strataglass Cleaner......................................................... 112 Steamers........................................................................ 369 Sun Protector Clip......................................................... 166 Sunbrella® Binding......................................................... 82 Superslip Silicone.......................................................... 47 Surcingles...................................................................... 73 Surface Preparation Chemicals...................................... 39 Suspender Accessories.................................................... 75 Swivel Plates.................................................................. 78 Swivel Rocker Bases....................................................... 77

Tie Downs..................................................................... 327 Ratchets............................................ 327 Hooks............................................... 328 Polyester............................................ 332 Tie Down Webbing....................................................... 331, 402 Tonneau Bows............................................................... 186 Tonneau Sockets............................................................ 170 Tools.............................................................................. 332 Automotive....................................... 332 Compressor....................................... 333 Cruiser.............................................. 334 Cutters.............................................. 335 Fasteners........................................... 341 Folders.............................................. 348 Grommets......................................... 348 Guns (heat)....................................... 351 Hammers.......................................... 351 Hog Rings........................................ 352 Kits................................................... 353 Knives............................................... 353 Mallets.............................................. 355 Miscellaneous................................... 356 Osborne............................................ 361 Piping............................................... 362 Punch............................................... 362 Quick-Fit.......................................... 363 Rivet................................................. 364 Shears............................................... 364 Sinuous Spring.................................. 366 Self Piercing...................................... 368 Steamers........................................... 369 Tackers.............................................. 370 Tubing.............................................. 375 Webbing........................................... 377 Welder.............................................. 378 Zippers............................................. 379 Top Snapper.................................................................. 341 Triangles........................................................................ 74 Trimmings..................................................................... 380 Edge................................................. 381 Hydem Gimp................................... 388 Miscellaneous................................... 388 Office Chair...................................... 384 Scroll................................................ 380 Welt.................................................. 384 Wire On........................................... 389 Tube Bender.................................................................. 189, 376 Tubing........................................................................... 187 Twill Tape...................................................................... 88 Twine............................................................................ 121, 322 Typar Decking............................................................... 239

T

T202 Tempotest Spray Teflon........................................ 43, 103 T-nuts............................................................................ 237 Tacks............................................................................. 289 Nails................................................. 289 Strip.................................................. 295 Upholstery........................................ 296 Tacking Strips................................................................ 296 Tailors Chalk (wax)........................................................ 258 Tape, Reflective............................................................. 300 Tape, Packing................................................................ 309 Tape, Transfer................................................................ 308 Tarp Welder................................................................... 378 Tent Pole Hardware....................................................... 184 Terylene (polyester)....................................................... 246 Thinsulate™.................................................................... 250 Thread........................................................................... 310 69 Nylon.......................................... 317 Bobbins............................................ 319 Epic.................................................. 322 Hand Sewing.................................... 318 JEF69 Nylon.................................... 321 JEF80 Spun Poly............................... 321 Koban............................................... 315 Monofil............................................ 319 Nylon............................................... 318 Polyester............................................320 Star Ultra.......................................... 314 Sunguard.......................................... 323 Tenara............................................... 326

Visit www.jennisfabrics.com

443


Index

U - Z

U

Z

Underpad (Landau)....................................................... 199 Upholstery Tacks........................................................... 296

Zippers.......................................................................... 408 Delrin Finished................................. 420 JEF Zip............................................. 430 Lenzip............................................... 421 YKK Vislon Chain............................ 422 YKK Vislon Finished........................ 427 Zipper Stop Pliers.......................................................... 379

V

Van Frames and Accessories........................................... 80 Van Seat Frames............................................................ 81 Velcro速...........................................................................390 Hook & Loop Sew On..................... 390 Hook & Loop Polyester.................... 396 Hook & Loop Pressure Sensitive....... 394 Velcro速 Sew On................................. 397 Velcro速 Pressure Sensitive.................. 398 Velstick............................................. 398 Vents for vinyl tops........................................................ 165 Vent & Washer Grommets............................................. 224 Vinyl Coat Spray............................................................ 40 Vinyl Prep..................................................................... 39 Vinyl Repair Liquid....................................................... 33 Vyna Bond.................................................................... 33

W

Washers......................................................................... 131 Water Repellency Chemicals.......................................... 44 Webbing........................................................................ 399 Cotton.............................................. 399 Cutters.............................................. 420 Furniture.......................................... 400 Jute................................................... 399 Propex.............................................. 400 Clips................................................. 412 Tools................................................. 401 Nylon............................................... 402 Polyester............................................ 405 Polypropylene................................... 403 Seat belts........................................... 406 Sunbrella速......................................... 403 Welting, Cord................................................................ 384 Welting, Premier............................................................ 387 Welting, Embossed........................................................ 387 Windows, Plastic........................................................... 193 Wire Eye Buttons.......................................................... 95 Wiss Shears.................................................................... 262 Wooden Bow................................................................. 186

X

XtremeEdge................................................................... 196

Z

Zippers.......................................................................... 408 Aluminum........................................ 409 Brass................................................. 411 Coil Chain........................................ 413 Coil Finished.................................... 418 Delrin Chain.................................... 419 444 Call toll free USA 1-877-95-ENNIS Canada 1-800-66-ENNIS


Index

Conversion Table

Common Conversions Length Conversion Imperial/USA unit

Metric (SI) unit

Metric (SI) unit

Imperial/USA unit

Inch

2.54 cm

Centimeter

0.39â&#x20AC;?

Foot

30.48 cm

Meter

3.28â&#x20AC;&#x2122;

Yard

0.91 m

Meter

1.09 yards

Imperial/USA unit

Metric (SI) unit

Metric (SI) unit

Imperial/USA unit

Ounce

28.35 g

Gram

0.035 oz.

Pound

0.45 kg

Kilogram

2.21lbs.

Imperial/USA unit

Metric (SI) unit

Metric (SI) unit

Imperial/USA unit

Fluid Ounce (US)

29.57 mL

100 milliliters

3.38 fl. oz.

Pint (US)

0.47 L

Liter

2.11 pints

Quart (US)

0.95 L

Liter

1.06 quarts

Gallon (US)

3.79 L

Liter

0.26 gallons

Weight Conversion

Volume Conversion

Visit www.jennisfabrics.com

445


Head Office Distribution Centre & Showroom 12122 68 Street Edmonton, Alberta, T5B 1R1 Canada Toronto Distribution Centre & Showroom 6300 Kenway Drive Mississauga, Ontario, L5T 2N3 Canada Vancouver Distribution Centre & Showroom 13911 Bridgeport Road Richmond, British Columbia, V6V 1J6 Canada Indianapolis Distribution Centre & Showroom Building 95 Park 100 5111 West 76 Street Indianapolis, Indiana 46268 USA

*00529084* 00529084

J. Ennis Fabrics Supply Catalogue 5th Ed  

5th Edition Supply Catalogue

J. Ennis Fabrics Supply Catalogue 5th Ed  

5th Edition Supply Catalogue

Advertisement