SOLID STAINLESS STEEL CLAMPS
James C. WhiteCo.Inc.(JCWCO)providesGeneralDimensionDrawingsandLoadRatingInformationsolely to aidthe customer in theselection of James C. WhiteCompany,Inc.productsand as areference to assistwiththe customer’s engineeringanddesignwork,anddoesnotconstitutearecommendationastothesuitabilityoftheseproductsforaspecific purpose.JCWCOprovidescomponentstandardsupportsasmaterialsintheconfigurationdefinedbythecustomer.Whilethe Corporationmayperformadesignanalysis or compiledesigndata, itremainsthecustomer’s responsibility to analyzethe Company’sproductsandverifyanyproductrelatedinformationprovidedtodeterminethesuitabilityofthematerialsforthe customer’s specificuse,and to determineandcommunicate to JCWCOtheapplicabletechnicalandqualityrequirements basedonthecustomer’sspecificuse.
Documentsprovidedandtheinformationcontainedthereonaretheproperty of theJames C. WhiteCompany,Inc.The documentsandinformationthereonmaynotbeusedforanypurposeotherthantheoneforwhichitwasoriginallyissuedto theholder,normayifbedisclosedtoanyotherpartywithoutthewrittenconsentoftheJamesC.WhiteCompany,Inc
Commercial & Safety-Related
Stainless Steel Tubing & Pipe Clamps
2D GUIDE CLAMP
3D ANCHOR CLAMP
2DL Guide Clamp
1-800-421-9410 sales@jcwco.com www.jcwco.com
JCWCO NC & PC Series Tube & Pipe Clamps are machined from solid stainless steel and are designed to be used in both commercial and safety-related applications. We offer both a 2directional (guide clamp) and 3-directional (anchor clamp). Part numbers listed below are the most commonly used sizes/types.
JCWCO proudly manufactures TUBETRACK the most complete tray support system for instrumentation and controls. Check out our full product offering or contact the factory to let us know how we can best serve you!
Hardware for each clamp available for purchase through JCWCO.
Guide Clamps
Clamps
1/4 Download Download NC-1-625-3D 1/4 Download Download WBS4-B3017 Download 3/4 NC-1-750-2D 1/4 Download Download NC-1-750-3D 1/4 Download Download WBS4-B3017 Download ANGULAR-CHAMFER
1/8 NC-1-125-2DL 1/4 Download WBS4-A5051 Download 3/16 NC-1-188-2DL 1/4 Download WBS4-A5051 Download 1/4
NC-1-250-2DL 1/4 Download WBS4-A5051 Download 5/16
NC-1-312-2DL 1/4 Download WBS4-A5051 Download 3/8
NC-1-375-2DL 1/4 Download WBS4-A5051 Download 1/2
NC-1-500-2DL 1/4 Download WBS4-A5051 Download 5/8
NC-1-625-2DL 1/4 Download WBS4-B3017 Download 3/4
NC-1-750-2DL 1/4 Download WBS4-B3017 Download STANDARD CLAMP WITH TALL 3/4" BASE
1/8 NC-1-125-2DBS 1/4 NC-1-125-3DB 1/4 WBS4-A5051 Download 3/16
NC-1-188-2DBS 1/4 Download Download NC-1-188-3DB 1/4 Download Download WBS4-A5051 Download 1/4
NC-1-250-2DBS 1/4 Download Download NC-1-250-3DB 1/4 Download Download WBS4-A5051 Download 5/16 NC-1-312-2DBS 1/4 Download Download NC-1-312-3DB 1/4 Download Download WBS4-A5051 Download 3/8 NC-1-375-2DBS 1/4 Download Download NC-1-375-3DB 1/4 Download Download WBS4-A5051 Download 1/2 NC-1-500-2DBS 1/4 Download Download NC-1-500-3DB 1/4 Download Download WBS4-A5051 Download HEAVY CLAMP
1/8
NC-1-125-2DH 3/8
NC-1-125-3DH 3/8 pending 3/16
NC-1-188-2DH 3/8
NC-1-188-3DH 3/8 pending 1/4
NC-1-250-2DH 3/8
NC-1-250-3DH 3/8 pending 5/16
NC-1-312-2DH 3/8
NC-1-312-3DH 3/8 pending 3/8
NC-1-375-2DH 3/8 NC-1-375-3DH 3/8 pending 1/2
NC-1-500-2DH 3/8 Download Download NC-1-500-3DH 3/8 Download Download pending 5/8
NC-1-625-2DH 3/8 NC-1-625-3DH 3/8 pending 3/4
1-800-421-9410 sales@jcwco.com www.jcwco.com
JCWCO NC & PC Series Tube & Pipe Clamps are machined from solid stainless steel and are designed to be used in both commercial and safety-related applications. We offer both a 2directional (guide clamp) and 3-directional (anchor clamp). Part numbers listed below are the most commonly used sizes/types.
JCWCO proudly manufactures TUBETRACK the most complete tray support system for instrumentation and controls. Check out our full product offering or contact the factory to let us know how we can best serve you!
Hardware for each clamp available for purchase through JCWCO.
(in)
1/4 Download Download NC-2-625-3D 1/4 Download Download Pending 3/4 NC-2-750-2D 1/4 Download Download NC-2-750-3D 1/4 Download Download Pending STANDARD CLAMP WITH TALL 3/4" BASE 1/8
1/4 Download Download NC-2-250-3DB 1/4 Download Download WBS4-A5050 Download 5/16 NC-2-312-2DBS 1/4 Download Download
1/2
1/4 NC-2-250-2DL 1/4 Download Download
Download 3/8
1/4 Download Download
Download 1/2
1/4 Download Download
contact sales@jcwco.com
James C. White Co. Inc. (JCWCO) provides General Dimension Drawings and Load Rating Information solely to aid the customer in the selection of James C. White Company, Inc. products and as a reference to assist with the customer’s engineering and design work, and does not constitute a recommendation as to the suitability of these products for a specific purpose. JCWCO provides component standard supports as materials in the configuration defined by the customer. While the Corporation may perform a design analysis or compile design data, it remains the customer’s responsibility to analyze the Company’s products and verify any product related information provided to determine the suitability of the materials for the customer’s specific use, and to determine and communicate to JCWCO the applicable technical and quality requirements based on the customer’s specific use.
Documents provided and the information contained thereon are the property of the James C. White Company, Inc. The documents and information thereon may not be used for any purpose other than the one for which it was originally issued to the holder, nor may if be disclosed to any other party without the written consent of the James C. White Company, Inc
NC & PC Series Tube & Pipe Clamps
Stainless Steel Double Tube
1-800-421-9410 sales@jcwco.com www.jcwco.com
JCWCO NC & PC Series Tube & Pipe Clamps are machined from solid stainless steel and are designed to be used in both commercial and safety-related applications. We offer both a 2directional (guide clamp) and 3-directional (anchor clamp). Part numbers listed below are the most commonly used sizes/types.
JCWCO proudly manufactures TUBETRACK the most complete tray support system for instrumentation and controls. Check out our full product offering or contact the factory to let us know how we can best serve you!
Hardware for each clamp available for purchase through JCWCO.
Guide Clamps
Pipe Size (in)
1 Pipe - 2 Bolts - 2 Directional Hold
Anchor Clamps 1 Pipe - 2 Bolts - 3 Directional Hold
NC & PC Series Tube & Pipe Clamps
Steel Single Pipe
James C. White Co. Inc. (JCWCO) provides General Dimension Drawings and Load Rating Information solely to aid the customer in the selection of James C. White Company, Inc. products and as a reference to assist with the customer’s engineering and design work, and does not constitute a recommendation as to the suitability of these products for a specific purpose. JCWCO provides component standard supports as materials in the configuration defined by the customer. While the Corporation may perform a design analysis or compile design data, it remains the customer’s responsibility to analyze the Company’s products and verify any product related information provided to determine the suitability of the materials for the customer’s specific use, and to determine and communicate to JCWCO the applicable technical and quality requirements based on the customer’s specific use.
Documents provided and the information contained thereon are the property of the James C. White Company, Inc. The documents and information thereon may not be used for any purpose other than the one for which it was originally issued to the holder, nor may if be disclosed to any other party without the written consent of the James C. White Company, Inc
1-800-421-9410
NC & PC Series Tube & Pipe Clamps sales@jcwco.com
Stainless Steel Variable Tube www.jcwco.com
JCWCO NC & PC Series Tube & Pipe Clamps are machined from solid stainless steel and are designed to be used in both commercial and safety-related applications. We offer both a 2directional (guide clamp) and 3-directional (anchor clamp). Part numbers listed below are the most commonly used sizes/types.
JCWCO proudly manufactures TUBETRACK the most complete tray support system for instrumentation and controls. Check out our full product offering or contact the factory to let us know how we can best serve you!
Hardware for each clamp available for purchase through JCWCO.
Size (in)
James C. White Co. Inc. (JCWCO) provides General Dimension Drawings and Load Rating Information solely to aid the customer in the selection of James C. White Company, Inc. products and as a reference to assist with the customer’s engineering and design work, and does not constitute a recommendation as to the suitability of these products for a specific purpose. JCWCO provides component standard supports as materials in the configuration defined by the customer. While the Corporation may perform a design analysis or compile design data, it remains the customer’s responsibility to analyze the Company’s products and verify any product related information provided to determine the suitability of the materials for the customer’s specific use, and to determine and communicate to JCWCO the applicable technical and quality requirements based on the customer’s specific use.
Documents provided and the information contained thereon are the property of the James C. White Company, Inc. The documents and information thereon may not be used for any purpose other than the one for which it was originally issued to the holder, nor may if be disclosed to any other party without the written consent of the James C. White Company, Inc
1-800-421-9410
NC & PC Series Tube & Pipe Clamps sales@jcwco.com Copper Refridgerant Tubing www.jcwco.com
JCWCO NC & PC Series Tube & Pipe Clamps are machined from solid stainless steel and are designed to be used in both commercial and safety-related applications. We offer both a 2directional (guide clamp) and 3-directional (anchor clamp). Part numbers listed below are the most commonly used sizes/types.
JCWCO proudly manufactures TUBETRACK the most complete tray support system for instrumentation and controls. Check out our full product offering or contact the factory to let us know how we can best serve you!
Hardware for each clamp available for purchase through JCWCO.
Control Room HVAC Condenser Applications
(in)
James C. White Co. Inc. (JCWCO) provides General Dimension Drawings and Load Rating Information solely to aid the customer in the selection of James C. White Company, Inc. products and as a reference to assist with the customer’s engineering and design work, and does not constitute a recommendation as to the suitability of these products for a specific purpose. JCWCO provides component standard supports as materials in the configuration defined by the customer. While the Corporation may perform a design analysis or compile design data, it remains the customer’s responsibility to analyze the Company’s products and verify any product related information provided to determine the suitability of the materials for the customer’s specific use, and to determine and communicate to JCWCO the applicable technical and quality requirements based on the customer’s specific use.
Documents provided and the information contained thereon are the property of the James C. White Company, Inc. The documents and information thereon may not be used for any purpose other than the one for which it was originally issued to the holder, nor may if be disclosed to any other party without the written consent of the James C. White Company, Inc
JCWCO NC & PC Series Tube & Pipe Clamps are machined from solid stainless steel and are designed to be used in both commercial and safety-related applications. We offer both a 2directional (guide clamp) and 3-directional (anchor clamp). Part numbers listed below are the most commonly used sizes/types.
JCWCO proudly manufactures TUBETRACK the most complete tray support system for instrumentation and controls. Check out our full product offering or contact the factory to let us know how we can best serve you!
Hardware for each clamp available for purchase through JCWCO.
Size (in)
James C. White Co. Inc. (JCWCO) provides General Dimension Drawings and Load Rating Information solely to aid the customer in the selection of James C. White Company, Inc. products and as a reference to assist with the customer’s engineering and design work, and does not constitute a recommendation as to the suitability of these products for a specific purpose. JCWCO provides component standard supports as materials in the configuration defined by the customer. While the Corporation may perform a design analysis or compile design data, it remains the customer’s responsibility to analyze the Company’s products and verify any product related information provided to determine the suitability of the materials for the customer’s specific use, and to determine and communicate to JCWCO the applicable technical and quality requirements based on the customer’s specific use.
Documents provided and the information contained thereon are the property of the James C. White Company, Inc. The documents and information thereon may not be used for any purpose other than the one for which it was originally issued to the holder, nor may if be disclosed to any other party without the written consent of the James C. White Company, Inc