Coffee Shop

OFFICE OF THE BUILDING OFFICIAL Republic of the Philippines Department of Public Works and Highway

LAND USE ZONING

COMMERCIAL SPACE

I LOVE MILKTEA

LOBBY

LINE AND GRADE

ARCHITECTURAL

THE SITE

STRUCTURAL

SANITARY

ELECTRICAL

MECHANICAL

THE SITE

RA 9266 (ARCHITECTURE ACT OF 2004): THESE DRAWINGS, AS INSTRUMENTS OF SERVICE, ARE THE PROPERTY & DOCUMENTS OF THE AUTHOR. IT SHALL BE UNLAWFUL FOR ANY PERSON, WITHOUT WRITTEN OR PRIOR CONSENT OF THE AUTHOR, TO DUPLICATE OR COPY SAID DOCUMENTS

B

B

B

WF-3

3

3

3

WF-3

REFRIGERATOR

CF-3

SERVICE AREA

FF-2

WF-2

WF-2

CF-3

2A

2A

2A

2

2

2 WF-2

WF-2

SEATING AREA

CF-2

DISPLAY SHELVES

FF-1

CF-1

1

1

1

FF-1

WF-1

CF-1

FF-2

WF-2

CF-2

WF-3

CF-3

RA 9266 (ARCHITECTURE ACT OF 2004): THESE DRAWINGS, AS INSTRUMENTS OF SERVICE, ARE THE PROPERTY & DOCUMENTS OF THE AUTHOR. IT SHALL BE UNLAWFUL FOR ANY PERSON, WITHOUT WRITTEN OR PRIOR CONSENT OF THE AUTHOR, TO DUPLICATE OR COPY SAID DOCUMENTS

GENERAL NOTES B

B

1. ALL ELECTRICAL WORKS INDICATED HEREIN ARE IN ACCORDANCE WITH THE LATEST EDITION OF THE PHILIPPINE ELECTRICAL CODE. 2. ELECTRIC SERVICE IS EXISTING 1Ø, LINE TO NEUTRAL + GROUND, 230V , 60HZ 3. METHOD OF WIRING IS IMC; UNLESS OTHERWISE SPECIFIED IN DRAWINGS. A. MINIMUM SIZE OF WIRES IS 3.5mm² "THHN" FOR MAIN AND "THWN" FOR GROUND UNLESS OTHERWISE SPECIFIED IN DRAWING. B. MINIMUM SIZE OF CONDUIT IS 20MM NOMINAL DIAMETER. ALL CONDUITS SIZES ARE BASED ON COMMERCIAL SIZE/S.

3

3

CKT 3

4 WIRING SHALL BE COLOR CODED AS FOLLOWS: L1=RED, L2=YELLOW, L3=BLUE, NEUTRAL=WHITE, GROUND=GREEN OR AS THE SAME AS EXISTED IN THE PROVISION. 5 IDENTIFY BRANCH CIRCUITS PHASE WIRES WITH WIRE MARKERS CORRESPONDING TO CIRCUIT BREAKERS NO. SHOWN ON PANEL SCHEDULE AT EA. POINT WHERE THEY PASS THROUGH JUNCTION BOXES.

CKT 4

CKT 1 S 1,2,3 S 4,5,6

6

6

5

5

CKT 6

6 ALL NON-CURRENT CARRYING METALLIC PARTS OR FRAMES OF ELECTRICAL EQUIPMENT SHALL BE ELECTRICALLY CONNECTED TO FEEDER/CIRCUIT GROUND WIRE WITH SUITABLE TERMINAL LUGS. ALL PANELS SHALL BE PROVIDED WITH GROUND TERMINAL. 7 ALL CONDUIT SHALL BE CONCEALED UNLESS SPECIFICALLY SHOWN OR NOTED OTHERWISE. EXPOSED CONDUIT RUNS SHALL BE INSTALLED PARALLEL TO OR PERPENDICULAR WITH THE BUILDING LINE AND SUPPORTED BY CONDUIT CLAMPS EVERY 1.50 METERS. 8 LAYOUT DIMENSION SHOWN IN DRAWINGS ARE APPROXIMATE ONLY AND INTENDED TO SERVE AS AN INSTALLATION GUIDE. DIMENSION MAY BE ADJUSTED AS REQUIRED TO MEET FIELD CONDITION. WHENEVER FIELD CONDITION OR EXIGENCIES OF CONSTRUCTION MAKE DEPARTURE FROM THE LAYOUT SHOWN, DETAIL OF SUCH DEPARTURE FROM PLAN AND REASON THEREOF SHALL BE SUBMITTED TO THE OWNER OR HIS DULY AUTHORIZED REPRESENTATIVE AND NO DEPARTURE SHALL BE MADE WITHOUT PRIOR WRITTEN APPROVAL OF THE AUTHORITIES CONCERNED. 9 ALL CONDUITS SHALL BE PROTECTED AGAINST DAMAGES BY THE ENTRANCE OF THE WATER AND FOREIGN MATTER DURING CONSTRUCTION. ALL ENDS OF CONDUITS SHALL BE PROPERLY PLUGGED TO EXCLUDE MOISTURE AND DUST IMMEDIATELY AFTER THE CONDUITS ARE PLACED. 10 ALL ABOVE MENTION ELECTRICAL NOTES SHALL FOLLOW THE EXISTING TENANT GUIDELINES.

CKT 5

5 5 5

4

CKT 7 4

2A

2A 2

CKT 2

2

2

2 2

2 3

CKT 8 2

2

3

1

TO POWER SUPPLY

1

1

1

2 - 14.0mm² THHN + 1 - 5.5mm² THWN in 25mm DIA RSC

70AT, 240V, 60HZ, 2P 15AT,2P

20AT,2P

20AT,2P

20AT,2P

COFFEE MAKER 3

30AT,2P

20AT,2P

REFRIGERATOR 5

30AT,2P

30AT,2P

ACU 1 7

20AT,2P

20AT,2P

LIGHTING 1

CKT #

SXXX

4 COFFEE MAKER 6 CHILLER 8 ACU 2 10 SPARE

SPARE 9

NEUTRAL

2 CONVENIENCE OUTLETS

GROUND

RA 9266 (ARCHITECTURE ACT OF 2004): THESE DRAWINGS, AS INSTRUMENTS OF SERVICE, ARE THE PROPERTY & DOCUMENTS OF THE AUTHOR. IT SHALL BE UNLAWFUL FOR ANY PERSON, WITHOUT WRITTEN OR PRIOR CONSENT OF THE AUTHOR, TO DUPLICATE OR COPY SAID DOCUMENTS

GENERAL NOTES 1.

ALL PLUMBING WORKS SHALL CONFORM WITH THE PREVAILING REQUIREMENTS OF THE LOCAL ORDINANCES AND NATIONAL LAWS.

CONNECT TO NEAREST TAPPING POINT

B

B

2.

READ THE DRAWING IN CONNECTION WITH OTHER RELATED DRAWINGS AND SPECIFICATIONS. THE ARCHITECT AND THE ENGINEER SHALL BE NOTIFIED IMMEDIATELY OF ANY DISCREPANCIES FOUND THEREIN.

3.

THE CONTRACTOR SHALL DETERMINE THE ACTUAL LOCATION, DEPTH, AND INVERT ELEVATION OF EXISTING PIPES AND STRUCTURES TO CONFORM WITH THE PROPOSED SANITARY UTILITIES. 4.

3

THE CONTRACTOR SHALL BE RESPONSIBLE FOR ALL REQUIRED FLOOR AND WALL OPENINGS.

5.

ALL PIPES SHALL BE INSTALLED AS INDICATED ANY RELOCATION REQUIRED FOR PROPER EXECUTION OF OTHER TRADES SHALL BE WITH/THE PRIOR APPROVAL OF THE ARCHITECT AND THE ENGINEER.

3

6.

ALL SLOPES FOR HORIZONTAL PIPES SHALL MAINTAIN 1% AS MINIMUM UNLESS OTHERWISE NOTED.

7.

ALL FIXTURES SHALL BE VENTED UNLESS OTHERWISE NOTED.

8.

ALL PIPE SIZES INDICATED ARE IN MILLIMETER (MM) DIAMETER UNLESS OTHERWISE NOTED.

9.

ALL UNDERGROUND G.I. WATER PIPES SHALL BE COATED WITH TWO (2) LAYERS OF ASPHALT WITH JUTE SACK.

2A

2A

10.

ALL WATER PIPES SHALL BE PROVIDED WITH 30 CM PIPE EXTENSION AND CAPPED AT THE END.

11.

ALL EXPOSED HOT WATER PIPES SHALL BE INSULATED.

12. ALL WATER PIPES SHALL BE HYDROSTATICALLY TESTED TO A PRESSURE OF 1034 KPa FOR TWO (2) HOURS MINIMUM.

2

13.

2

ALL WATER PIPES AND WATER TANKS SHALL BE THOROUGHLY FLUSHED AND DISINFECTED.

14. ALL SANITARY AND STORM DRAINAGE PIPES SHALL BE HYDROSTATICALLY TESTED (AT LEAST 3.0 M HIGH) TO ENSURE THAT THE SYSTEM IS WATER-TIGHT. 15. WORKMANSHIP: THE WORK THROUGHOUT SHALL BE EXECUTED IN THE BEST AND MOST THOROUGH MANNER KNOWN TO TRADE AND TO THE SATISFACTION OF THE ARCHITECT AND THE ENGINEER.

1

1

TAP TO EXISTING DRAINAGE

RA 9266 (ARCHITECTURE ACT OF 2004): THESE DRAWINGS, AS INSTRUMENTS OF SERVICE, ARE THE PROPERTY & DOCUMENTS OF THE AUTHOR. IT SHALL BE UNLAWFUL FOR ANY PERSON, WITHOUT WRITTEN OR PRIOR CONSENT OF THE AUTHOR, TO DUPLICATE OR COPY SAID DOCUMENTS