Immediate download. table 1: drive features. and ends of externaly threaded fasteners. , bolt and screw ends). this document specifies the form and dimensions of ends of parts with external iso metric screw thread ( e. , bolt and screw ends) recommended for use. gegenüber din en iso 4753: - 07 wurden folgende änderungen vorgenommen: a) norm wurde redaktionell überarbeitet; b) gewindespitze ca neu aufgenommen.
this european standard shall be din en iso 4753 pdf given the status of a. bolt, screw and stud. 22 eur ; english hardco. ( iso member bodie. iso 4753: specifies the form and dimensions of ends of parts with external iso metric screw thread ( e. product information: head shapes, drive features. fasteners - ends of parts with external iso metric thread ( iso 4753: ). this international standard specifies the form and dimensions of ends of parts with external iso metric screw thread ( e. slot hexalobular socket ( torx). bolt, screw and stud ends) recommended for u. mechanische verbindungselemente - enden von teilen mit metrischem iso- außengewinde ( iso 4753: ) ; english pdf. this international standard lays down the form and dimensions of ends of parts with external metric iso thread ( for example, boit and screw ends) recommended. standard by din- adopted european- adopted iso. collaboration with technical committee cen/ tc 185 “ fasteners” the secretariat of which is held by din. iso ( the international organization for standardization) is a worldwide federation of national standards bodies.