1 minute read
Upper Control Removal
from JBA-15.0 Nissan
by JBA Offroad
1. Prior to installation, verify your part number ordered with the part number received, Driver Side and Passenger Side (USA driven vehicles) stamped in the arm by the ball joint.
2. Jack up and place a jack stand under the frame rail behind the front wheel. *Never work under a unsupported vehicle.
3. Remove tire and inner fender well.
4. On driver side (USA driver side) remove steering shaft to get to the upper control arm bolt.
5. Remove ball joint from the steering knuckle.
6. Remove mounting bolts from upper control arm.
*Repeat steps 3, 5 and 6 on passenger side.
Removal Video:
