G3.Zheng Jingjung.Rep2.17

L U M I N O S I T Y

Aerial

introduction This building is made by the concrete and glass. The outside is closed to the shape of pyramid which has been changed a bit. And the function of the cover side is to provide more light into the underground, in some cases, it can give different light shapes in the daytime.

Ground

Spatial Diagrams

View

View

introduction This design is more likely to the open space, there is one floor window which is quite similar to a well, each line on the glass are the light entrance.

sect

Idea 1

tion

Scale Plan

Idea 2

Louvre Design Concept

View

Museum

Idea 1

Design Concept

Light C

View

Church

Idea 2

The architect tried to use thick walls and floors, a stout pillar, a g highlight this sacredness, the architect hopes to achieve a detach map found that the pillars above the unidirectional beam, and to The more important operation is contrary to the conventional d eccentric layout-pillars southward, holes northward-the significa of the image of a unidirectional beam to the south, but also to in head position in the north side of the main entrance observation with the floor is completely out of state, strengthening the thick this step eccentric operation, the column is located in the middl with this gap and regret.

crematorum ba

Formal and spatial Study

gap-like light expression of the sanctity of space, in order to hment between the pillars and the floor, carefully read the o ensure that only a minimum of beam to connect the roof, drawing, that is, all pillars and their upper floors left empty ance of this operation is not only to conceal the maximum ncrease the incidence of the south to the light, The column n is in full backlight state, the upper extreme bright and roof of the floating feeling. You can imagine, if the lack of le of the empty, the final rendering of the effect compared

aumshulenweg