Community College of Baltimore County - Bid Package - 2013

1040 Hull Street Suite 100 Baltimore, MD 21230 T: 410.347.8500 F: 410.347.8519 Architecture | Graphic Design | Interiors | Landscape Architecture | Planning

Project Name

Date

Document Title

Community College of Baltimore County Interior Signage Program - Design Intent Documentation

07.08.2013

Design Intent Documentation ISSUE FOR BID

Project No. 21134.00

Copyright © 2012 AYERS | SAINT | GROSS

No. Date

0.0

DRAWING INDEX

SECTION 1

SIGN TYPE OVERVIEW

1.1 1.2

Sign Type Overview Sign Type Overview

SECTION 2

GRAPHIC STANDARDS

2.1 2.2 2.3

Type Specifications Symbol Specifications Graphic Icon Specifications

SECTION 3

SIGN TYPE ELEVATIONS, DETAILS, AND GRAPHIC LAYOUTS

--

Notes These drawings are intended to illustrate design intent only, and should only be used as a general reference guideline. The Contrator bears sole responsibility for the performance and quality of the sign products.

The quality of fit and finish on the final product must meet or exceed the requirements of the design intent documents, sudsequently approved shop drawings, and other changes expressly authorized by Designer.

All materials used are to be as specified and/or meet or exceed all required local and national codes.

3.1 Sign Types A1 and A2 (Sign Panel Component) Elevation Views 3.2 Sign Type A2 Elevation Views 3.3 Sign Types A3 and A4 (Sign Panel Component) Elevation Views 3.4 Sign Types A3 and A4 (Sign Panel Component) Elevation Views 3.5 Sign Type A4 Elevation Views 3.6 Name Panel (Sign Types A2 and A4) Elevation Views 3.6_alt Name Panel (Sign Types A2 and A4) Elevation Views - Alternate Fabrication 3.7 Name Panel (Sign Types A2 and A4) Graphic Layouts 3.8 Sign Type A5 Elevation Views 3.9 Sign Type A5B Elevation Views 3.10 3.11

Sign Types Sign Types

B1, B2, B3, B4, B5, B6, B7, B8, and B10 Elevation Views B1, B2, B4, B5, B6, B7, B8, and B10 Graphic Layouts

3.12 Sign Type D1 Elevation Views and Details 3.13 Sign Type D1 Elevation Views and Details 3.14 Sign Type D1 Insert Graphic Layout 3.15 3.16

Sign Types Sign Types

D2A, D2B, and D2C D2A, D2B, and D2C

All locations shown are approximate. Final sign locations shall be determined during pre-installation walk-through with Owner.

Messages and Locations shown in this document are for general reference only. Refer to message schedules and sign location plans for actual messages.

• Catons_Rm_Number_BID.pdf • Dundalk_Rm_Number_BID.pdf • Essex_Rm_Number_BID.pdf

• Catons_Wayfinding_BID.pdf • Dundalk_Wayfinding_BID.pdf • Essex_Wayfinding_BID.pdf

• Catons_SLP_BID.pdf • Dundalk_SLP_BID.pdf • Essex_SLP_BID.pdf

• Add1_Catons_Rm_Number_BID.pdf • Add1_Catons_Wayfinding_BID.pdf

Contractor to verify wall surfaces and ceiling conditions to receive signage installation and provide recommended mounting attachment per wall surface and ceiling condition. Suspended signs shall be mounted in such a way as to not have excessive movement due to wind or HVAC equipment.

Contractor is responsible for any and all existing signage removal and wall surface restoration coordination as described on Sheets No. 4.6 and 4.7 and within the Technical Specifications.

Contractor shall obtain final electronic list of occupants for Name Panels from Owner. Contractor shall coordinate required information fields, file type, information style, and format directly with Owner.

1040 Hull Street Suite 100 Baltimore, MD 21230 T: 410.347.8500 F: 410.347.8519

Elevation Views Graphic Layout and Side View

3.17 Sign Type D3A Elevation Views 3.18 Sign Type D3B Elevation Views 3.19 Sign Type D4 Elevation Views and Graphic Layouts 3.20 Sign Type D5 Elevation Views SECTION 4

MOUNTING ELEVATIONS

4.1 4.2 4.3 4.4 4.5

Sign Types Sign Types Sign Types Sign Types Sign Types

4.6 4.7

Revision

A1, A2, A3, A4, A5, and A5B Mounting Elevations B1, B2, B3, B4, B5, B6, B7, B8, and B10 Mounting Elevation D1, D2A, D2B, and D2C Mounting Elevations D3A and D3B Mounting Elevations D4 and D5 Mounting Elevations Existing Signage Removal / Restoration Elevations Existing Signage Removal / Restoration Elevations

Project Number

Document Title

21134.00

Design Intent Documentation ISSUE FOR BID

Project Name

Community College of Baltimore County Interior Signage Program

Sheet Title

Drawing Index

Date

07.08.2013

Sheet No.

0.0 Copyright © 2012 AYERS | SAINT | GROSS

Section

SIGN TYPE OVERVIEW

1

Copyright © 2012 AYERS | SAINT | GROSS

Sign Type: A1 Room Identification Sign

SUITE 200

Sign Type: A2 Room Identification Sign w/ Magnetic Name Plate

224

Sign Type: A3 Department Identification Sign

220B

Alejandra Splatafora, Ed.D

Center for Academic Career & Life Planning

Sign Type: A4 Department Identification Sign w/ Magnetic Name Plate

220B Center for Academic Career & Life Planning

No. Date

Revision

--

Notes These drawings are intended to illustrate design intent only, and should only be used as a general reference guideline. The Contrator bears sole responsibility for the performance and quality of the sign products.

The quality of fit and finish on the final product must meet or exceed the requirements of the design intent documents, sudsequently approved shop drawings, and other changes expressly authorized by Designer.

All materials used are to be as specified and/or meet or exceed all required local and national codes.

All locations shown are approximate. Final sign locations shall be determined during pre-installation walk-through with Owner.

Alejandra Splatafora, Ed.D

Sign Type: A5 Utility Room Sign Sign types A2 and A4 include modular components (Sign Panel and removable Name Panel) as shown below

Sign Panel

Sign Type: A5B Utility Room Sign (wider message condition)

220

220

ELECTRICAL CLOSET

ELECTRICAL MECHANICAL OPERATIONS

Sign Type: B1-B10 Typical Core and Restroom Signs

Messages and Locations shown in this document are for general reference only. Refer to message schedules and sign location plans for actual messages.

• Catons_Rm_Number_BID.pdf • Dundalk_Rm_Number_BID.pdf • Essex_Rm_Number_BID.pdf

• Catons_Wayfinding_BID.pdf • Dundalk_Wayfinding_BID.pdf • Essex_Wayfinding_BID.pdf

• Catons_SLP_BID.pdf • Dundalk_SLP_BID.pdf • Essex_SLP_BID.pdf

• Add1_Catons_Rm_Number_BID.pdf • Add1_Catons_Wayfinding_BID.pdf

Contractor to verify wall surfaces and ceiling conditions to receive signage installation and provide recommended mounting attachment per wall surface and ceiling condition. Suspended signs shall be mounted in such a way as to not have excessive movement due to wind or HVAC equipment.

Contractor is responsible for any and all existing signage removal and wall surface restoration coordination as described on Sheets No. 4.6 and 4.7 and within the Technical Specifications.

Contractor shall obtain final electronic list of occupants for Name Panels from Owner. Contractor shall coordinate required information fields, file type, information style, and format directly with Owner.

1040 Hull Street Suite 100 Baltimore, MD 21230 T: 410.347.8500 F: 410.347.8519

RESTROOM

Project Number

Document Title

21134.00

Design Intent Documentation ISSUE FOR BID

removable Name Panel Project Name

Sign Panel for sign type A1 shall be of identical construction to Sign Panel for sign type A2 to allow for future addition of Name Panels by Owner Sign Panel for sign type A3 shall be of identical construction to Sign Panel for sign type A4 to allow for future addition of Name Panels by Owner Name Panels shall be interchangeable between sign types A1, A2, A3, and A4

Community College of Baltimore County Interior Signage Program

Sheet Title

Sign Type Overview

Date

Sheet No.

07.08.2013

1.1 Copyright © 2012 AYERS | SAINT | GROSS

Sign Type: D1 Building / Floor Directory

Sign Type: D2A Wall Mounted Directional - Small

2

LEVEL 1 Career Center International Student Services Academic Advisement Center Disability Support Services Testing Center LEVEL 2 Student Success Center Reading & World Language

Sign Type: D2C Wall Mounted Directional - Large

No. Date

201-222 Records & Registration Student Services

Classroom & Academic Support Center LOWER LEVEL Office of Judicial Affairs Office of Public Safety Enrollment Services Admissions Office Bursar’s Office Financial Aid Registrar’s Office

Sign Type: D2B Wall Mounted Directional - Medium

201-222 Records & Registration Student Services

201-222 Records & Registration Student Services

223-255 Counseling Center

223-255 Counseling Center

Financial Aid Center and Additional Text

Financial Aid Center and Additional Text

--

Notes These drawings are intended to illustrate design intent only, and should only be used as a general reference guideline. The Contrator bears sole responsibility for the performance and quality of the sign products.

The quality of fit and finish on the final product must meet or exceed the requirements of the design intent documents, sudsequently approved shop drawings, and other changes expressly authorized by Designer.

001 Suite 003 011 Suite 012 Suite 013 Suite 014 Suite 015

All materials used are to be as specified and/or meet or exceed all required local and national codes.

All locations shown are approximate. Final sign locations shall be determined during pre-installation walk-through with Owner.

Messages and Locations shown in this document are for general reference only. Refer to message schedules and sign location plans for actual messages.

Suite 103 Suite 105 120-156 131

Suite 203 208

Revision

Sign Type: D3B Ceiling Mounted Key Destination Identification Sign

Enrollment Office

Sign Type: D3A Oversized Key Destination Sign (special exceptionwhere site conditions permit only)

Sign Type: D4 Flag Mounted Key Destination Sign

Office of Public Safety Sign Type: D5 Flag Mounted Symbol Sign

• Catons_Rm_Number_BID.pdf • Dundalk_Rm_Number_BID.pdf • Essex_Rm_Number_BID.pdf

• Catons_Wayfinding_BID.pdf • Dundalk_Wayfinding_BID.pdf • Essex_Wayfinding_BID.pdf

• Catons_SLP_BID.pdf • Dundalk_SLP_BID.pdf • Essex_SLP_BID.pdf

• Add1_Catons_Rm_Number_BID.pdf • Add1_Catons_Wayfinding_BID.pdf

Contractor to verify wall surfaces and ceiling conditions to receive signage installation and provide recommended mounting attachment per wall surface and ceiling condition. Suspended signs shall be mounted in such a way as to not have excessive movement due to wind or HVAC equipment.

Contractor is responsible for any and all existing signage removal and wall surface restoration coordination as described on Sheets No. 4.6 and 4.7 and within the Technical Specifications.

Contractor shall obtain final electronic list of occupants for Name Panels from Owner. Contractor shall coordinate required information fields, file type, information style, and format directly with Owner.

1040 Hull Street Suite 100 Baltimore, MD 21230 T: 410.347.8500 F: 410.347.8519 Project Number

Document Title

21134.00

Design Intent Documentation ISSUE FOR BID

Project Name

Community College of Baltimore County Interior Signage Program

Disability Support Services Testing Center International Student Services

Sheet Title

Sign Type Overview

Date

Sheet No.

07.08.2013

1.2 Copyright © 2012 AYERS | SAINT | GROSS

Section

GRAPHIC STANDARDS

2

Copyright © 2012 AYERS | SAINT | GROSS

Frutiger LT Std 65 Bold

ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz 0123456789

No. Date

Revision

--

Notes These drawings are intended to illustrate design intent only, and should only be used as a general reference guideline. The Contrator bears sole responsibility for the performance and quality of the sign products.

The quality of fit and finish on the final product must meet or exceed the requirements of the design intent documents, sudsequently approved shop drawings, and other changes expressly authorized by Designer.

All materials used are to be as specified and/or meet or exceed all required local and national codes.

All locations shown are approximate. Final sign locations shall be determined during pre-installation walk-through with Owner.

Messages and Locations shown in this document are for general reference only. Refer to message schedules and sign location plans for actual messages.

Frutiger LT Std 55 Roman

ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz 0123456789 Frutiger LT Std 45 Light

ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz 0123456789

• Catons_Rm_Number_BID.pdf • Dundalk_Rm_Number_BID.pdf • Essex_Rm_Number_BID.pdf

• Catons_Wayfinding_BID.pdf • Dundalk_Wayfinding_BID.pdf • Essex_Wayfinding_BID.pdf

• Catons_SLP_BID.pdf • Dundalk_SLP_BID.pdf • Essex_SLP_BID.pdf

• Add1_Catons_Rm_Number_BID.pdf • Add1_Catons_Wayfinding_BID.pdf

Contractor to verify wall surfaces and ceiling conditions to receive signage installation and provide recommended mounting attachment per wall surface and ceiling condition. Suspended signs shall be mounted in such a way as to not have excessive movement due to wind or HVAC equipment.

Contractor is responsible for any and all existing signage removal and wall surface restoration coordination as described on Sheets No. 4.6 and 4.7 and within the Technical Specifications.

Contractor shall obtain final electronic list of occupants for Name Panels from Owner. Contractor shall coordinate required information fields, file type, information style, and format directly with Owner.

1040 Hull Street Suite 100 Baltimore, MD 21230 T: 410.347.8500 F: 410.347.8519 Project Number

Document Title

21134.00

Design Intent Documentation ISSUE FOR BID

Project Name

Community College of Baltimore County Interior Signage Program

Sheet Title

Type Specifications

Date

07.08.2013

Sheet No.

2.1 Copyright © 2012 AYERS | SAINT | GROSS

Symbols

No. Date

Revision

--

Notes These drawings are intended to illustrate design intent only, and should only be used as a general reference guideline. The Contrator bears sole responsibility for the performance and quality of the sign products.

S4

Vector Artwork “S4.eps” Women

S7

S6

S5

Vector Artwork “S5.eps” Men

Vector Artwork “S6.eps” Accessible

Vector Artwork “S7.eps” Accessible Restroom (Unisex)

S8

Vector Artwork “S8.eps” Accessible Restroom (Men)

S9

Vector Artwork “S9.eps” Accessible Restroom (Women)

The quality of fit and finish on the final product must meet or exceed the requirements of the design intent documents, sudsequently approved shop drawings, and other changes expressly authorized by Designer.

All materials used are to be as specified and/or meet or exceed all required local and national codes.

All locations shown are approximate. Final sign locations shall be determined during pre-installation walk-through with Owner.

Messages and Locations shown in this document are for general reference only. Refer to message schedules and sign location plans for actual messages.

S10

Vector Artwork “S10.eps” Child Restroom

S11

Vector Artwork “S11.eps” Elevator

S12

Vector Artwork “S12.eps” Stairs

S13

S14

Vector Artwork “S13.eps” Accessible Child Restroom

Vector Artwork “S14.eps” Unisex Restoroom

S11

Vector Artwork “S15.eps” Accessible Lift

• Catons_Rm_Number_BID.pdf • Dundalk_Rm_Number_BID.pdf • Essex_Rm_Number_BID.pdf

• Catons_Wayfinding_BID.pdf • Dundalk_Wayfinding_BID.pdf • Essex_Wayfinding_BID.pdf

• Catons_SLP_BID.pdf • Dundalk_SLP_BID.pdf • Essex_SLP_BID.pdf

• Add1_Catons_Rm_Number_BID.pdf • Add1_Catons_Wayfinding_BID.pdf

Contractor to verify wall surfaces and ceiling conditions to receive signage installation and provide recommended mounting attachment per wall surface and ceiling condition. Suspended signs shall be mounted in such a way as to not have excessive movement due to wind or HVAC equipment.

Contractor is responsible for any and all existing signage removal and wall surface restoration coordination as described on Sheets No. 4.6 and 4.7 and within the Technical Specifications.

Contractor shall obtain final electronic list of occupants for Name Panels from Owner. Contractor shall coordinate required information fields, file type, information style, and format directly with Owner.

1040 Hull Street Suite 100 Baltimore, MD 21230 T: 410.347.8500 F: 410.347.8519

S3L

Vector Artwork “S3L.eps” Left Arrow (Circle Denotes Arrow Size)

S3Z

Vector Artwork “S3Z.eps” Left Diagonal Arrow (Circle Denotes Arrow Size)

S3U

Vector Artwork “S3U.eps” Up Arrow (Circle Denotes Arrow Size)

S3X

Vector Artwork “S3X.eps” Right Diagonal Arrow (Circle Denotes Arrow Size)

S3R

Vector Artwork “S3R.eps” Right Arrow (Circle Denotes Arrow Size)

S3D

Vector Artwork “S3D.eps” Down Arrow (Circle Denotes Arrow Size)

Project Number

Document Title

21134.00

Design Intent Documentation ISSUE FOR BID

Project Name

Community College of Baltimore County Interior Signage Program

Sheet Title

Symbol Specifications S3LD

Vector Artwork “S3LD.eps” Up, Left Arrow (Circle Denotes Arrow Size)

S3LD2

Vector Artwork “S3LD2.eps” Up, Left Diagonal Arrow (Circle Denotes Arrow Size)

S3UR

Vector Artwork “S3UR.eps” Left Diagonal, Up Arrow (Circle Denotes Arrow Size)

S3UL

Vector Artwork “S3UL.eps” Right Diagonal, Up Arrow (Circle Denotes Arrow Size)

S3RD2

Vector Artwork “S3RD2.eps” Up, Right Diagonal Arrow (Circle Denotes Arrow Size)

S3RD

Vector Artwork “S3RD.eps” Up, Right Arrow (Circle Denotes Arrow Size)

Date

07.08.2013

Sheet No.

2.2 Copyright © 2012 AYERS | SAINT | GROSS

Graphic Icons

No. Date

Revision

--

Notes These drawings are intended to illustrate design intent only, and should only be used as a general reference guideline. The Contrator bears sole responsibility for the performance and quality of the sign products.

The quality of fit and finish on the final product must meet or exceed the requirements of the design intent documents, sudsequently approved shop drawings, and other changes expressly authorized by Designer.

“L4.eps” Vector Artwork Sign Type D1

All materials used are to be as specified and/or meet or exceed all required local and national codes.

All locations shown are approximate. Final sign locations shall be determined during pre-installation walk-through with Owner.

Messages and Locations shown in this document are for general reference only. Refer to message schedules and sign location plans for actual messages.

• Catons_Rm_Number_BID.pdf • Dundalk_Rm_Number_BID.pdf • Essex_Rm_Number_BID.pdf

• Catons_Wayfinding_BID.pdf • Dundalk_Wayfinding_BID.pdf • Essex_Wayfinding_BID.pdf

• Catons_SLP_BID.pdf • Dundalk_SLP_BID.pdf • Essex_SLP_BID.pdf

• Add1_Catons_Rm_Number_BID.pdf • Add1_Catons_Wayfinding_BID.pdf

Contractor to verify wall surfaces and ceiling conditions to receive signage installation and provide recommended mounting attachment per wall surface and ceiling condition. Suspended signs shall be mounted in such a way as to not have excessive movement due to wind or HVAC equipment.

“L5.eps” Vector Artwork Sign Types D2A, D2B, D2C

Contractor is responsible for any and all existing signage removal and wall surface restoration coordination as described on Sheets No. 4.6 and 4.7 and within the Technical Specifications.

Contractor shall obtain final electronic list of occupants for Name Panels from Owner. Contractor shall coordinate required information fields, file type, information style, and format directly with Owner.

“L6.eps” Vector Artwork Sign Types A1, A2, A3, A4, A5

1040 Hull Street Suite 100 Baltimore, MD 21230 T: 410.347.8500 F: 410.347.8519

“L7.eps” Vector Artwork Sign Type A5B Project Number

Document Title

21134.00

Design Intent Documentation ISSUE FOR BID

Project Name

Community College of Baltimore County Interior Signage Program

“L8.eps” Vector Artwork Sign Types D3A, D3B

“L9.eps” Vector Artwork Sign Types D4, D5

Sheet Title

Graphic Icon Specifications

Date

07.08.2013

Sheet No.

2.3 Copyright © 2012 AYERS | SAINT | GROSS

Section

SIGN TYPE ELEVATIONS, DETAILS, AND GRAPHIC LAYOUTS

3

Copyright © 2012 AYERS | SAINT | GROSS

7" 3/4” OC

1/2”

1/8” 5 3/8”

1/4”

5/8”

224

3/8” OC

3 1/4”

1 3/8”

align

No. Date

--

Sign Panel 1/16” thk pre-finished aluminum laminated to 3/16” thk acrylic Finish: #220 Inline Edges and Corners: Eased Aluminum Edges: Brushed Acrylic Edges: Surface painted PMS 293C Mounting: Laminated to Mounting Spacers

Mounting Spacers (2)

The quality of fit and finish on the final product must meet or exceed the requirements of the design intent documents, sudsequently approved shop drawings, and other changes expressly authorized by Designer.

Tactile Copy / Braille Romark ADA Alternative Applique 1/32” thk with adhesive back Material: Single-ply modified acrylic Finish: Matte non-glare Color: 3X1-307 Charcoal Gray Type: Frutiger LT Std 55 Roman Copy Height: 5/8” Tall Braille Process: Clear redundant raster bead braille

Front Elevation - A1 and A2 (Sign Panel Component) Scale: 1” = 1”

Notes These drawings are intended to illustrate design intent only, and should only be used as a general reference guideline. The Contrator bears sole responsibility for the performance and quality of the sign products.

Wall Surface

All materials used are to be as specified and/or meet or exceed all required local and national codes.

All locations shown are approximate. Final sign locations shall be determined during pre-installation walk-through with Owner.

Messages and Locations shown in this document are for general reference only. Refer to message schedules and sign location plans for actual messages.

VHB Tape

Graphic Accent Etched and filled PMS 293C File Name: “L6.eps”

A

Revision

B

Section View Scale: 1” = 1”

• Catons_Rm_Number_BID.pdf • Dundalk_Rm_Number_BID.pdf • Essex_Rm_Number_BID.pdf

• Catons_Wayfinding_BID.pdf • Dundalk_Wayfinding_BID.pdf • Essex_Wayfinding_BID.pdf

• Catons_SLP_BID.pdf • Dundalk_SLP_BID.pdf • Essex_SLP_BID.pdf

• Add1_Catons_Rm_Number_BID.pdf • Add1_Catons_Wayfinding_BID.pdf

Contractor to verify wall surfaces and ceiling conditions to receive signage installation and provide recommended mounting attachment per wall surface and ceiling condition. Suspended signs shall be mounted in such a way as to not have excessive movement due to wind or HVAC equipment.

Contractor is responsible for any and all existing signage removal and wall surface restoration coordination as described on Sheets No. 4.6 and 4.7 and within the Technical Specifications.

1/8”

Contractor shall obtain final electronic list of occupants for Name Panels from Owner. Contractor shall coordinate required information fields, file type, information style, and format directly with Owner.

VHB Tape 1/32” thk Adhears sign to Wall Surface Wall Surface: Varies

3 1/8”

3 1/4”

Mounting Spacers (2) 1/8” thk clear routed acrylic, Edges: Flame polished Mounting: Laminated to back of Sign Panel and VHB Tape to Wall Surface Wall Surface: Varies

High Strength Magnet 1/16” thk, laminated to back of Sign Panel

1040 Hull Street Suite 100 Baltimore, MD 21230 T: 410.347.8500 F: 410.347.8519 Project Number

Document Title

21134.00

Design Intent Documentation ISSUE FOR BID

Project Name

Community College of Baltimore County Interior Signage Program

Sheet Title

Sign Panel (back view)

C

Rear Elevation - A1 and A2 (Sign Panel Component) Scale: 1” = 1”

Sign Types A1 and A2 (Sign Panel Component) Elevation Views Date

07.08.2013

Sheet No.

3.1 Copyright © 2012 AYERS | SAINT | GROSS

High Strength Magnet Wall Surface

C

1/32” thk VHB Tape

No. Date

Mounting Spacers (2)

--

Plan View Scale: 1” = 1”

Revision

Notes These drawings are intended to illustrate design intent only, and should only be used as a general reference guideline. The Contrator bears sole responsibility for the performance and quality of the sign products.

The quality of fit and finish on the final product must meet or exceed the requirements of the design intent documents, sudsequently approved shop drawings, and other changes expressly authorized by Designer.

1/8” Reference Sheet No. 3.1 for Sign Panel Specifications

1/4”

All materials used are to be as specified and/or meet or exceed all required local and national codes.

All locations shown are approximate. Final sign locations shall be determined during pre-installation walk-through with Owner.

Messages and Locations shown in this document are for general reference only. Refer to message schedules and sign location plans for actual messages.

224

Mounting Spacers (2)

• Catons_Rm_Number_BID.pdf • Dundalk_Rm_Number_BID.pdf • Essex_Rm_Number_BID.pdf

• Catons_Wayfinding_BID.pdf • Dundalk_Wayfinding_BID.pdf • Essex_Wayfinding_BID.pdf

• Catons_SLP_BID.pdf • Dundalk_SLP_BID.pdf • Essex_SLP_BID.pdf

• Add1_Catons_Rm_Number_BID.pdf • Add1_Catons_Wayfinding_BID.pdf

Contractor to verify wall surfaces and ceiling conditions to receive signage installation and provide recommended mounting attachment per wall surface and ceiling condition. Suspended signs shall be mounted in such a way as to not have excessive movement due to wind or HVAC equipment.

Contractor is responsible for any and all existing signage removal and wall surface restoration coordination as described on Sheets No. 4.6 and 4.7 and within the Technical Specifications.

Contractor shall obtain final electronic list of occupants for Name Panels from Owner. Contractor shall coordinate required information fields, file type, information style, and format directly with Owner.

1/32” thk VHB Tape

Sign Panel and Name Panel must align to form a consistent edge profile

1040 Hull Street Suite 100 Baltimore, MD 21230 T: 410.347.8500 F: 410.347.8519

Wall Surface

Firstname Lastname, Ed.D

Felt Spacers (2)

Project Number

Document Title

21134.00

Design Intent Documentation ISSUE FOR BID

Project Name

Community College of Baltimore County Interior Signage Program Mounting Sleeve

Sheet Title

A

Front Elevation - A2 Scale: 1” = 1”

Reference Sheet No. 3.6 and 3.7 for Name Panel Specifications

B

Section View Scale: 1” = 1”

Sign Type A2 Elevation Views

Date

07.08.2013

Sheet No.

3.2 Copyright © 2012 AYERS | SAINT | GROSS

7" 3/4” OC

1/2”

1/8” 5 3/8”

1/4” No. Date

Revision

1 3/8”

align

--

These drawings are intended to illustrate design intent only, and should only be used as a general reference guideline. The Contrator bears sole responsibility for the performance and quality of the sign products.

The quality of fit and finish on the final product must meet or exceed the requirements of the design intent documents, sudsequently approved shop drawings, and other changes expressly authorized by Designer.

Tactile Copy / Braille Romark ADA Alternative Applique 1/32” thk with adhesive back Material: Single-ply modified acrylic Finish: Matte non-glare Color: 3X1-307 Charcoal Gray Type: Frutiger LT Std 55 Roman Copy Height: 5/8” Tall Braille Process: Clear redundant raster bead braille

3/8” OC

5/8”

224

Notes

All materials used are to be as specified and/or meet or exceed all required local and national codes.

All locations shown are approximate. Final sign locations shall be determined during pre-installation walk-through with Owner.

Messages and Locations shown in this document are for general reference only. Refer to message schedules and sign location plans for actual messages.

1 1/2”

Graphic Accent Etched and filled PMS 293C File Name: “L6.eps”

7/8”

7 3/4”

Center for Academic Career & Life Planning 5 1/4” max. message length

Mounting Spacers (2)

• Catons_Rm_Number_BID.pdf • Dundalk_Rm_Number_BID.pdf • Essex_Rm_Number_BID.pdf

• Catons_Wayfinding_BID.pdf • Dundalk_Wayfinding_BID.pdf • Essex_Wayfinding_BID.pdf

• Catons_SLP_BID.pdf • Dundalk_SLP_BID.pdf • Essex_SLP_BID.pdf

• Add1_Catons_Rm_Number_BID.pdf • Add1_Catons_Wayfinding_BID.pdf

Contractor to verify wall surfaces and ceiling conditions to receive signage installation and provide recommended mounting attachment per wall surface and ceiling condition. Suspended signs shall be mounted in such a way as to not have excessive movement due to wind or HVAC equipment.

Identification Copy Surface screened MP 10269 Type: Frutiger LT Std 55 Roman Copy Height: 5/8” Tall

Contractor is responsible for any and all existing signage removal and wall surface restoration coordination as described on Sheets No. 4.6 and 4.7 and within the Technical Specifications.

Wall Surface

Contractor shall obtain final electronic list of occupants for Name Panels from Owner. Contractor shall coordinate required information fields, file type, information style, and format directly with Owner.

1/32” thk VHB Tape

Sign Panel 1/16” thk pre-finished aluminum laminated to 3/16” thk acrylic Finish: #220 Inline Edges and Corners: Eased Aluminum Edges: Brushed Acrylic Edges: Surface painted PMS 293C Mounting: Laminated to Mounting Spacers

1040 Hull Street Suite 100 Baltimore, MD 21230 T: 410.347.8500 F: 410.347.8519 Project Number

Document Title

21134.00

Design Intent Documentation ISSUE FOR BID

Project Name

Community College of Baltimore County Interior Signage Program

Sheet Title

A

Front Elevation - A3 and A4 (Sign Panel Component) Scale: 1” = 1”

B

Section View Scale: 1” = 1”

Sign Types A3 and A4 (Sign Panel Component) Elevation Views Date

07.08.2013

Sheet No.

3.3 Copyright © 2012 AYERS | SAINT | GROSS

1/8”

No. Date

Mounting Spacers (2) 1/8” thk clear routed acrylic, Edges: Flame polished Mounting: Laminated to back of Sign Panel and VHB Tape to Wall Surface Wall Surface: Varies

Revision

--

Notes These drawings are intended to illustrate design intent only, and should only be used as a general reference guideline. The Contrator bears sole responsibility for the performance and quality of the sign products.

The quality of fit and finish on the final product must meet or exceed the requirements of the design intent documents, sudsequently approved shop drawings, and other changes expressly authorized by Designer.

All materials used are to be as specified and/or meet or exceed all required local and national codes.

All locations shown are approximate. Final sign locations shall be determined during pre-installation walk-through with Owner.

Messages and Locations shown in this document are for general reference only. Refer to message schedules and sign location plans for actual messages.

7 3/4”

VHB Tape 1/32” thk Adhears sign to Wall Surface Wall Surface: Varies

• Catons_Rm_Number_BID.pdf • Dundalk_Rm_Number_BID.pdf • Essex_Rm_Number_BID.pdf

• Catons_Wayfinding_BID.pdf • Dundalk_Wayfinding_BID.pdf • Essex_Wayfinding_BID.pdf

• Catons_SLP_BID.pdf • Dundalk_SLP_BID.pdf • Essex_SLP_BID.pdf

• Add1_Catons_Rm_Number_BID.pdf • Add1_Catons_Wayfinding_BID.pdf

Contractor to verify wall surfaces and ceiling conditions to receive signage installation and provide recommended mounting attachment per wall surface and ceiling condition. Suspended signs shall be mounted in such a way as to not have excessive movement due to wind or HVAC equipment.

Contractor is responsible for any and all existing signage removal and wall surface restoration coordination as described on Sheets No. 4.6 and 4.7 and within the Technical Specifications.

Contractor shall obtain final electronic list of occupants for Name Panels from Owner. Contractor shall coordinate required information fields, file type, information style, and format directly with Owner.

3 1/8”

1040 Hull Street Suite 100 Baltimore, MD 21230 T: 410.347.8500 F: 410.347.8519

High Strength Magnet 1/16” thk, laminated to back of Sign Panel Include on both A1 and A2 signs for future additions of Name Panels

Project Number

Document Title

21134.00

Design Intent Documentation ISSUE FOR BID

Project Name

Community College of Baltimore County Interior Signage Program

Sign Panel (back view) Sheet Title

A

Rear Elevation - A3 and A4 (Sign Panel Component) Scale: 1” = 1”

Sign Types A3 and A4 (Sign Panel Component) Elevation Views Date

07.08.2013

Sheet No.

3.4 Copyright © 2012 AYERS | SAINT | GROSS

1/32” thk VHB Tape

Wall Surface

Mounting Spacers (2)

C

High Strength Magnet

Plan View Scale: 3/4” = 1” 7"

3/4” OC

No. Date

Reference Sheet No. 3.3 and 3.4 for Sign Panel Specifications

1/2”

Revision

--

1/8” 5 3/8”

1/4” Notes

1 3/8”

align

These drawings are intended to illustrate design intent only, and should only be used as a general reference guideline. The Contrator bears sole responsibility for the performance and quality of the sign products.

The quality of fit and finish on the final product must meet or exceed the requirements of the design intent documents, sudsequently approved shop drawings, and other changes expressly authorized by Designer.

3/8” OC 5/8”

220B

All materials used are to be as specified and/or meet or exceed all required local and national codes.

All locations shown are approximate. Final sign locations shall be determined during pre-installation walk-through with Owner.

Messages and Locations shown in this document are for general reference only. Refer to message schedules and sign location plans for actual messages.

Center for Academic Career & Life Planning

3/4”

7 3/4”

1 3/8”

Mounting Spacers (2)

13/16”

1/8”

• Add1_Catons_Rm_Number_BID.pdf • Add1_Catons_Wayfinding_BID.pdf

Contractor shall obtain final electronic list of occupants for Name Panels from Owner. Contractor shall coordinate required information fields, file type, information style, and format directly with Owner.

Wall Surface

1040 Hull Street Suite 100 Baltimore, MD 21230 T: 410.347.8500 F: 410.347.8519

1/32” thk VHB Tape

Project Number

Document Title

21134.00

Design Intent Documentation ISSUE FOR BID

Project Name

Community College of Baltimore County Interior Signage Program

Firstname Lastname, Ed.D

5/8”

2”

• Catons_SLP_BID.pdf • Dundalk_SLP_BID.pdf • Essex_SLP_BID.pdf

Contractor is responsible for any and all existing signage removal and wall surface restoration coordination as described on Sheets No. 4.6 and 4.7 and within the Technical Specifications.

Sign Panel and Name Panel must align to form a consistent edge profile

Front Elevation - A4 Scale: 3/4” = 1”

• Catons_Wayfinding_BID.pdf • Dundalk_Wayfinding_BID.pdf • Essex_Wayfinding_BID.pdf

Contractor to verify wall surfaces and ceiling conditions to receive signage installation and provide recommended mounting attachment per wall surface and ceiling condition. Suspended signs shall be mounted in such a way as to not have excessive movement due to wind or HVAC equipment.

5 1/4” max. message length

A

• Catons_Rm_Number_BID.pdf • Dundalk_Rm_Number_BID.pdf • Essex_Rm_Number_BID.pdf

Mounting Sleeve Felt Spacers (2)

Reference Sheet No. 3.6 and 3.7 for Name Panel Specifications

Sheet Title

Sign Type A4 Elevation Views

Date

B

Side View Scale: 3/4” = 1”

07.08.2013

Sheet No.

3.5 Copyright © 2012 AYERS | SAINT | GROSS

7" 1 1/4”

4 1/2”

1 1/4” No. Date

Wall Surface

Revision

--

C

Notes

Plan View Scale: 1” = 1”

These drawings are intended to illustrate design intent only, and should only be used as a general reference guideline. The Contrator bears sole responsibility for the performance and quality of the sign products.

The quality of fit and finish on the final product must meet or exceed the requirements of the design intent documents, sudsequently approved shop drawings, and other changes expressly authorized by Designer.

1/16”

7" 1 1/4”

4 1/2”

All materials used are to be as specified and/or meet or exceed all required local and national codes.

All locations shown are approximate. Final sign locations shall be determined during pre-installation walk-through with Owner.

1 1/4”

Messages and Locations shown in this document are for general reference only. Refer to message schedules and sign location plans for actual messages.

Mounting Sleeve 1/8” thk clear routed acrylic, Edges: Flame polished Mounting: Slides behind Sign Panel (Ref. Sheet 3.3)

• Catons_Rm_Number_BID.pdf • Dundalk_Rm_Number_BID.pdf • Essex_Rm_Number_BID.pdf

• Catons_Wayfinding_BID.pdf • Dundalk_Wayfinding_BID.pdf • Essex_Wayfinding_BID.pdf

• Catons_SLP_BID.pdf • Dundalk_SLP_BID.pdf • Essex_SLP_BID.pdf

• Add1_Catons_Rm_Number_BID.pdf • Add1_Catons_Wayfinding_BID.pdf

Contractor to verify wall surfaces and ceiling conditions to receive signage installation and provide recommended mounting attachment per wall surface and ceiling condition. Suspended signs shall be mounted in such a way as to not have excessive movement due to wind or HVAC equipment.

3”

Contractor is responsible for any and all existing signage removal and wall surface restoration coordination as described on Sheets No. 4.6 and 4.7 and within the Technical Specifications.

Contractor shall obtain final electronic list of occupants for Name Panels from Owner. Contractor shall coordinate required information fields, file type, information style, and format directly with Owner.

1/32” thk metal sheeting laminated to face of Mounting Sleeve

1/16”

1/16”

5”

3/16”

2”

Firstname Lastname, Ed.D Front Elevation - Name Panel Scale: 1” = 1”

Name Panel 1/16” thk clear matte acrylic laminated to 3/16” thk acrylic Background Process: Second surface painted MP 10269 (between layers) Edges: Flame polished Mounting: Laminated to Mounting Sleeve

Project Number

Document Title

21134.00

Design Intent Documentation ISSUE FOR BID

Project Name

Community College of Baltimore County Interior Signage Program

Felt Spacers (2) 1/32” thk, match thickness of VHB Tape or Rigid Mounting Plate

Name Copy 3M Controltac Plus Graphic Films Color: 150C-10 Matte White Type: Frutiger LT Std 45 Light Copy Height: Varies, Reference Sheet No. 3.7

Sheet Title

Mounting Sleeve

1/8”

A

1040 Hull Street Suite 100 Baltimore, MD 21230 T: 410.347.8500 F: 410.347.8519

Wall Surface

B

Section View Scale: 1” = 1”

Name Panel (Sign Types A2 and A4) Elevation Views Date

07.08.2013

Sheet No.

3.6 Copyright © 2012 AYERS | SAINT | GROSS

7" 1 1/4”

4 1/2”

1 1/4” No. Date

Wall Surface

Revision

--

C

Notes

Plan View Scale: 1” = 1”

These drawings are intended to illustrate design intent only, and should only be used as a general reference guideline. The Contrator bears sole responsibility for the performance and quality of the sign products.

The quality of fit and finish on the final product must meet or exceed the requirements of the design intent documents, sudsequently approved shop drawings, and other changes expressly authorized by Designer.

1/16”

7" 1 1/4”

4 1/2”

All locations shown are approximate. Final sign locations shall be determined during pre-installation walk-through with Owner.

1 1/4”

Messages and Locations shown in this document are for general reference only. Refer to message schedules and sign location plans for actual messages.

Mounting Sleeve 1/8” thk clear routed acrylic, Edges: Flame polished Mounting: Slides behind Sign Panel (Ref. Sheet 3.3)

3”

All materials used are to be as specified and/or meet or exceed all required local and national codes.

• Catons_Rm_Number_BID.pdf • Dundalk_Rm_Number_BID.pdf • Essex_Rm_Number_BID.pdf

• Catons_Wayfinding_BID.pdf • Dundalk_Wayfinding_BID.pdf • Essex_Wayfinding_BID.pdf

• Catons_SLP_BID.pdf • Dundalk_SLP_BID.pdf • Essex_SLP_BID.pdf

• Add1_Catons_Rm_Number_BID.pdf • Add1_Catons_Wayfinding_BID.pdf

Contractor to verify wall surfaces and ceiling conditions to receive signage installation and provide recommended mounting attachment per wall surface and ceiling condition. Suspended signs shall be mounted in such a way as to not have excessive movement due to wind or HVAC equipment.

Wall Surface

Contractor is responsible for any and all existing signage removal and wall surface restoration coordination as described on Sheets No. 4.6 and 4.7 and within the Technical Specifications.

1/32” thk metal sheeting laminated to face of Mounting Sleeve

Contractor shall obtain final electronic list of occupants for Name Panels from Owner. Contractor shall coordinate required information fields, file type, information style, and format directly with Owner.

ALTERNATE FABRICATION AREA

1/16”

5”

1/16” 1/4” 1/16” Routed Edge

2”

Firstname Lastname, Ed.D Front Elevation - Name Panel - Alternate Fabrication Scale: 1” = 1”

Project Number

Document Title

21134.00

Design Intent Documentation ISSUE FOR BID

Project Name

Community College of Baltimore County Interior Signage Program

Felt Spacers (2) 1/32” thk, match thickness of VHB Tape or Rigid Mounting Plate

Name Copy 3M Controltac Plus Graphic Films Color: 150C-10 Matte White Type: Frutiger LT Std 45 Light Copy Height: Varies, Reference Sheet No. 3.7

Sheet Title

Mounting Sleeve

1/8”

A

Name Panel 1/4” thk solid matte acrylic with 1/16“ routed edge as shown Color: Gray (final color TBD) Edges: Flame polished Mounting: Laminated to Mounting Sleeve

1040 Hull Street Suite 100 Baltimore, MD 21230 T: 410.347.8500 F: 410.347.8519

B

Section View Scale: 1” = 1”

Name Panel (Sign Types A2 and A4) Elevation Views - Alt. Fabrication Date

07.08.2013

Sheet No.

3.6_alt Copyright © 2012 AYERS | SAINT | GROSS

1 3/16”

1 1/4”

5 1/4” max. message length

Firstname Lastname

Graphic Layout - Name Panel Single Occupancy, Short Name Copy Height: 3/8” Tall Scale: 1” = 1”

No. Date

Revision

--

Various occupancy conditions and name lengths exist.

When titles exist, title and last name must appear together on a line.

Messages exceeding maximum message length must break to the next line.

Notes These drawings are intended to illustrate design intent only, and should only be used as a general reference guideline. The Contrator bears sole responsibility for the performance and quality of the sign products.

The quality of fit and finish on the final product must meet or exceed the requirements of the design intent documents, sudsequently approved shop drawings, and other changes expressly authorized by Designer.

5/8”

7/8”

All materials used are to be as specified and/or meet or exceed all required local and national codes.

Firstname Lastname, Ed.D

Graphic Layout - Name Panel Single Occupancy, Long Name Copy Height: 3/8” Tall Scale: 1” = 1” Various occupancy conditions and name lengths exist.

When titles exist, title and last name must appear together on a line.

Messages exceeding maximum message length must break to the next line.

All locations shown are approximate. Final sign locations shall be determined during pre-installation walk-through with Owner.

Messages and Locations shown in this document are for general reference only. Refer to message schedules and sign location plans for actual messages.

• Catons_Rm_Number_BID.pdf • Dundalk_Rm_Number_BID.pdf • Essex_Rm_Number_BID.pdf

• Catons_Wayfinding_BID.pdf • Dundalk_Wayfinding_BID.pdf • Essex_Wayfinding_BID.pdf

• Catons_SLP_BID.pdf • Dundalk_SLP_BID.pdf • Essex_SLP_BID.pdf

• Add1_Catons_Rm_Number_BID.pdf • Add1_Catons_Wayfinding_BID.pdf

Contractor to verify wall surfaces and ceiling conditions to receive signage installation and provide recommended mounting attachment per wall surface and ceiling condition. Suspended signs shall be mounted in such a way as to not have excessive movement due to wind or HVAC equipment.

Contractor is responsible for any and all existing signage removal and wall surface restoration coordination as described on Sheets No. 4.6 and 4.7 and within the Technical Specifications.

7 /16”

7/8”

Contractor shall obtain final electronic list of occupants for Name Panels from Owner. Contractor shall coordinate required information fields, file type, information style, and format directly with Owner.

First Person, Title Second Person, Title

Graphic Layout - Name Panel Double Occupancy Copy Height: 1/4” Tall Scale: 1” = 1” Various occupancy conditions and name lengths exist.

When titles exist, title and last name must appear together on a line.

Messages exceeding maximum message length must break to the next line.

1040 Hull Street Suite 100 Baltimore, MD 21230 T: 410.347.8500 F: 410.347.8519 Project Number

Document Title

21134.00

Design Intent Documentation ISSUE FOR BID

Project Name

7 /16” 7 /16”

11/16”

Community College of Baltimore County Interior Signage Program

First Person, Title Second Person, Title Third Person, Title

Graphic Layout - Name Panel Triple Occupancy Copy Height: 1/4” Tall Scale: 1” = 1” Various occupancy conditions and name lengths exist.

When titles exist, title and last name must appear together on a line.

Messages exceeding maximum message length must break to the next line.

Sheet Title

Name Panel (Sign Types A2 and A4) Graphic Layouts Date

07.08.2013

Sheet No.

3.7 Copyright © 2012 AYERS | SAINT | GROSS

7" 3/4” OC

1/2”

5 3/8”

1/4” No. Date

Revision

1 3/8”

align

--

1 3/8”

ELECTRICAL CLOSET

5/8”

7/8”

7 3/4”

These drawings are intended to illustrate design intent only, and should only be used as a general reference guideline. The Contrator bears sole responsibility for the performance and quality of the sign products.

Tactile Copy / Braille 1/32” thk with adhesive back Romark ADA Alternative Applique Material: Single-ply modified acrylic Finish: Matte non-glare Color: 3X1-307 Charcoal Gray Type: Frutiger LT Std 55 Roman Copy Height: 5/8” Tall Braille Process: Clear redundant raster bead braille

3/8” OC

5/8”

220

Notes

The quality of fit and finish on the final product must meet or exceed the requirements of the design intent documents, sudsequently approved shop drawings, and other changes expressly authorized by Designer.

All materials used are to be as specified and/or meet or exceed all required local and national codes.

All locations shown are approximate. Final sign locations shall be determined during pre-installation walk-through with Owner.

Messages and Locations shown in this document are for general reference only. Refer to message schedules and sign location plans for actual messages.

Graphic Accent Etched and filled PMS 293C File Name: “L6.eps”

Wall Surface

• Catons_SLP_BID.pdf • Dundalk_SLP_BID.pdf • Essex_SLP_BID.pdf

• Add1_Catons_Rm_Number_BID.pdf • Add1_Catons_Wayfinding_BID.pdf

Contractor is responsible for any and all existing signage removal and wall surface restoration coordination as described on Sheets No. 4.6 and 4.7 and within the Technical Specifications.

Contractor shall obtain final electronic list of occupants for Name Panels from Owner. Contractor shall coordinate required information fields, file type, information style, and format directly with Owner.

1040 Hull Street Suite 100 Baltimore, MD 21230 T: 410.347.8500 F: 410.347.8519

1/32” thk VHB Tape

Project Number

Document Title

21134.00

Design Intent Documentation ISSUE FOR BID

Project Name

Community College of Baltimore County Interior Signage Program

Sign Panel 1/16” thk pre-finished aluminum laminated to 3/16” thk acrylic Finish: #220 Inline Edges and Corners: Eased Aluminum Edges: Brushed Acrylic Edges: Surface painted PMS 293C Mounting: VHB Tape to wall surface Wall Surface: Varies

Front Elevation - A5 Scale: 1” = 1”

• Catons_Wayfinding_BID.pdf • Dundalk_Wayfinding_BID.pdf • Essex_Wayfinding_BID.pdf

Contractor to verify wall surfaces and ceiling conditions to receive signage installation and provide recommended mounting attachment per wall surface and ceiling condition. Suspended signs shall be mounted in such a way as to not have excessive movement due to wind or HVAC equipment.

Tactile Copy / Braille 1/32” thk with adhesive back Romark ADA Alternative Applique Material: Single-ply modified acrylic Finish: Matte non-glare Color: 3X1-307 Charcoal Gray Type: Frutiger LT Std 55 Roman Copy Height: 5/8” Tall Braille Process: Clear redundant raster bead braille

5 1/4” max. message length

A

• Catons_Rm_Number_BID.pdf • Dundalk_Rm_Number_BID.pdf • Essex_Rm_Number_BID.pdf

Sheet Title

Sign Type A5 Elevation Views

B

Side View Scale: 1” = 1”

Date

07.08.2013

Sheet No.

3.8 Copyright © 2012 AYERS | SAINT | GROSS

8" 3/4” OC

1/2”

6 3/8”

1/4” No. Date

Revision

1 3/8”

align

--

1 3/8” 5/8”

7/8”

7/8”

7 3/4”

ELECTRICAL MECHANICAL OPERATIONS 6 1/4” max. message length

A

Front Elevation - A5B Scale: 1” = 1”

These drawings are intended to illustrate design intent only, and should only be used as a general reference guideline. The Contrator bears sole responsibility for the performance and quality of the sign products.

Tactile Copy / Braille 1/32” thk with adhesive back Romark ADA Alternative Applique Material: Single-ply modified acrylic Finish: Matte non-glare Color: 3X1-307 Charcoal Gray Type: Frutiger LT Std 55 Roman Copy Height: 5/8” Tall Braille Process: Clear redundant raster bead braille

3/8” OC

5/8”

220

Notes

The quality of fit and finish on the final product must meet or exceed the requirements of the design intent documents, sudsequently approved shop drawings, and other changes expressly authorized by Designer.

All materials used are to be as specified and/or meet or exceed all required local and national codes.

All locations shown are approximate. Final sign locations shall be determined during pre-installation walk-through with Owner.

Messages and Locations shown in this document are for general reference only. Refer to message schedules and sign location plans for actual messages.

Graphic Accent Etched and filled PMS 293C File Name: “L7.eps”

• Catons_Rm_Number_BID.pdf • Dundalk_Rm_Number_BID.pdf • Essex_Rm_Number_BID.pdf

• Catons_Wayfinding_BID.pdf • Dundalk_Wayfinding_BID.pdf • Essex_Wayfinding_BID.pdf

• Catons_SLP_BID.pdf • Dundalk_SLP_BID.pdf • Essex_SLP_BID.pdf

• Add1_Catons_Rm_Number_BID.pdf • Add1_Catons_Wayfinding_BID.pdf

Contractor to verify wall surfaces and ceiling conditions to receive signage installation and provide recommended mounting attachment per wall surface and ceiling condition. Suspended signs shall be mounted in such a way as to not have excessive movement due to wind or HVAC equipment.

Contractor is responsible for any and all existing signage removal and wall surface restoration coordination as described on Sheets No. 4.6 and 4.7 and within the Technical Specifications.

Wall Surface

Contractor shall obtain final electronic list of occupants for Name Panels from Owner. Contractor shall coordinate required information fields, file type, information style, and format directly with Owner.

Tactile Copy / Braille 1/32” thk with adhesive back Romark ADA Alternative Applique Material: Single-ply modified acrylic Finish: Matte non-glare Color: 3X1-307 Charcoal Gray Type: Frutiger LT Std 55 Roman Copy Height: 5/8” Tall Braille Process: Clear redundant raster bead braille

Sign Panel 1/16” thk pre-finished aluminum laminated to 3/16” thk acrylic Finish: #220 Inline Edges and Corners: Eased Aluminum Edges: Brushed Acrylic Edges: Surface painted PMS 293C Mounting: VHB Tape to wall surface Wall Surface: Varies

B

1040 Hull Street Suite 100 Baltimore, MD 21230 T: 410.347.8500 F: 410.347.8519

1/32” thk VHB Tape

Project Number

Document Title

21134.00

Design Intent Documentation ISSUE FOR BID

Project Name

Community College of Baltimore County Interior Signage Program

Sheet Title

Sign Type A5B Elevation Views

Side View Scale: 1” = 1”

Date

07.08.2013

Sheet No.

3.9 Copyright © 2012 AYERS | SAINT | GROSS

7" 1/4”

center left to right

No. Date

Revision

--

Notes These drawings are intended to illustrate design intent only, and should only be used as a general reference guideline. The Contrator bears sole responsibility for the performance and quality of the sign products.

varies per symbol (Ref. Sheet No. 3.8)

3/4”

All materials used are to be as specified and/or meet or exceed all required local and national codes.

All locations shown are approximate. Final sign locations shall be determined during pre-installation walk-through with Owner.

Messages and Locations shown in this document are for general reference only. Refer to message schedules and sign location plans for actual messages.

• Catons_Rm_Number_BID.pdf • Dundalk_Rm_Number_BID.pdf • Essex_Rm_Number_BID.pdf

• Catons_Wayfinding_BID.pdf • Dundalk_Wayfinding_BID.pdf • Essex_Wayfinding_BID.pdf

• Catons_SLP_BID.pdf • Dundalk_SLP_BID.pdf • Essex_SLP_BID.pdf

• Add1_Catons_Rm_Number_BID.pdf • Add1_Catons_Wayfinding_BID.pdf

Contractor to verify wall surfaces and ceiling conditions to receive signage installation and provide recommended mounting attachment per wall surface and ceiling condition. Suspended signs shall be mounted in such a way as to not have excessive movement due to wind or HVAC equipment.

Contractor is responsible for any and all existing signage removal and wall surface restoration coordination as described on Sheets No. 4.6 and 4.7 and within the Technical Specifications.

Tactile Symbol 1/32” thk with adhesive back Romark ADA Alternative Applique Material: Single-ply modified acrylic Finish: Matte non-glare Color: 3X1-307 Charcoal Gray File Name: Varies per location, reference Message Schedule

RESTROOM

5/8”

The quality of fit and finish on the final product must meet or exceed the requirements of the design intent documents, sudsequently approved shop drawings, and other changes expressly authorized by Designer.

Wall Surface

1 1/4”

9 3/4”

6”

varies per symbol (Ref. Sheet No. 3.8)

Sign Panel 1/16” thk pre-finished aluminum laminated to 3/16” thk acrylic Finish: #220 Inline Edges and Corners: Eased Aluminum Edges: Brushed Acrylic Edges: Surface painted PMS 293C Mounting: VHB Tape to wall surface Wall Surface: Varies

Contractor shall obtain final electronic list of occupants for Name Panels from Owner. Contractor shall coordinate required information fields, file type, information style, and format directly with Owner.

1040 Hull Street Suite 100 Baltimore, MD 21230 T: 410.347.8500 F: 410.347.8519

1/32” thk VHB Tape

Tactile Copy / Braille 1/32” thk with adhesive back Romark ADA Alternative Applique Material: Single-ply modified acrylic Finish: Matte non-glare Color: 3X1-307 Charcoal Gray Type: Frutiger LT Std 55 Roman Copy Height: 5/8” Tall Braille Process: Clear redundant raster bead braille

Project Number

Document Title

21134.00

Design Intent Documentation ISSUE FOR BID

Project Name

Community College of Baltimore County Interior Signage Program

Sheet Title

A

Front Elevation - B1 thru B10 - B3 (shown as typical) Scale: 3/4” = 1”

B

Side View Scale: 3/4” = 1”

Sign Types B1, B2, B3, B4, B5, B6, B7, B8, and B10 Elevation Views Date

07.08.2013

Sheet No.

3.10 Copyright © 2012 AYERS | SAINT | GROSS

center left to right

center left to right

No. Date

3”

2”

2”

center left to right

2”

center left to right

--

Notes

4”

4”

These drawings are intended to illustrate design intent only, and should only be used as a general reference guideline. The Contrator bears sole responsibility for the performance and quality of the sign products.

3”

4”

Revision

The quality of fit and finish on the final product must meet or exceed the requirements of the design intent documents, sudsequently approved shop drawings, and other changes expressly authorized by Designer.

Alt. Layout - B1 Scale: 3/8” = 1”

RESTROOM

Alt. Layout - B2 Scale: 3/8” = 1”

B

center left to right

Alt. Layout - B4 Scale: 3/8” = 1”

Alt. Layout - B5 Scale: 3/8” = 1”

D

center left to right

center left to right

2” 4”

4”

4”

2”

2”

center left to right

C

All locations shown are approximate. Final sign locations shall be determined during pre-installation walk-through with Owner.

Messages and Locations shown in this document are for general reference only. Refer to message schedules and sign location plans for actual messages.

• Catons_Rm_Number_BID.pdf • Dundalk_Rm_Number_BID.pdf • Essex_Rm_Number_BID.pdf

• Catons_Wayfinding_BID.pdf • Dundalk_Wayfinding_BID.pdf • Essex_Wayfinding_BID.pdf

• Catons_SLP_BID.pdf • Dundalk_SLP_BID.pdf • Essex_SLP_BID.pdf

• Add1_Catons_Rm_Number_BID.pdf • Add1_Catons_Wayfinding_BID.pdf

Contractor to verify wall surfaces and ceiling conditions to receive signage installation and provide recommended mounting attachment per wall surface and ceiling condition. Suspended signs shall be mounted in such a way as to not have excessive movement due to wind or HVAC equipment.

Contractor is responsible for any and all existing signage removal and wall surface restoration coordination as described on Sheets No. 4.6 and 4.7 and within the Technical Specifications.

Contractor shall obtain final electronic list of occupants for Name Panels from Owner. Contractor shall coordinate required information fields, file type, information style, and format directly with Owner.

2”

A

MEN

1040 Hull Street Suite 100 Baltimore, MD 21230 T: 410.347.8500 F: 410.347.8519

4”

WOMAN

WOMEN LOCKER ROOM

All materials used are to be as specified and/or meet or exceed all required local and national codes.

Project Number

Document Title

21134.00

Design Intent Documentation ISSUE FOR BID

Project Name

Community College of Baltimore County Interior Signage Program

MEN LOCKER ROOM

ELEVATOR

STAIRS

LIFT

Sheet Title

Sign Types B1, B2, B4, B5, B6, B7, B8, and B10 Graphic Layouts

E

Alt. Layout - B6 Scale: 3/8” = 1”

F

Alt. Layout - B7 Scale: 3/8” = 1”

G

Alt. Layout - B8 Scale: 3/8” = 1”

H

Alt. Layout - B10 Scale: 3/8” = 1”

Date

07.08.2013

Sheet No.

3.11 Copyright © 2012 AYERS | SAINT | GROSS

1’-6” 2” OC 1 1/4”

1’-2 1/8”

Reference Sheet No. 3.13 for Header Panel and Back Plate Construction Details Header Panel 9/16” thk pre-finished aluminum, milled as shown to create channel for Window Panel, alignment posts (6), and top edge to accept set screws (tap Header Panel to accept set screws (3) Finish: #220 Inline Edges and Corners: Eased Edges: Brushed Mounting: Magnetically attached to Back Plate w/ alignment posts (6) and set screws (3)

2 3/8” OC

11”

6”

align

2

1’-11”

3’-0”

These drawings are intended to illustrate design intent only, and should only be used as a general reference guideline. The Contrator bears sole responsibility for the performance and quality of the sign products.

5/16” 1/4”

Threaded Studs Provide threaded studs as required for sign installation

Insert Header Panel, Window Panel, and Footer Panel must align to form a consistent edge profile, provide 45˚ bevel as shown on all edges of Header Panel, Window Panel and Footer Panel

001 Suite 003 011 Suite 012 Suite 013 Suite 014 Suite 015

Suite 103 Suite 105 120-156 131

3/8”

LEVEL 1 Career Center International Student Services Academic Advisement Center Disability Support Services Testing Center

Notes

Window Panel

Classroom & Academic Support Center

Revision

--

Floor Copy Etched and filled MP 10269 Type: Frutiger LT Std 65 Bold Copy Height: 4” Tall Graphic Accent Etched and filled PMS 293C File Name: “L4.eps”

LOWER LEVEL Office of Judicial Affairs Office of Public Safety Enrollment Services Admissions Office Bursar’s Office Financial Aid Registrar’s Office

No. Date

Back Plate 1/4” thk acrylic, routed to accept magnetic strips (3), drilled to accept alignment posts (6), and drilled to accept countersunk screws (3) for mounting Footer Panel Background Process: Surface painted, MP White Edges: Routed, finished smooth and painted PMS 293C Mounting Method: VHB Tape to Wall Surface Wall Surface: Varies

The quality of fit and finish on the final product must meet or exceed the requirements of the design intent documents, sudsequently approved shop drawings, and other changes expressly authorized by Designer.

All materials used are to be as specified and/or meet or exceed all required local and national codes.

All locations shown are approximate. Final sign locations shall be determined during pre-installation walk-through with Owner.

Messages and Locations shown in this document are for general reference only. Refer to message schedules and sign location plans for actual messages.

• Catons_Rm_Number_BID.pdf • Dundalk_Rm_Number_BID.pdf • Essex_Rm_Number_BID.pdf

• Catons_Wayfinding_BID.pdf • Dundalk_Wayfinding_BID.pdf • Essex_Wayfinding_BID.pdf

• Catons_SLP_BID.pdf • Dundalk_SLP_BID.pdf • Essex_SLP_BID.pdf

• Add1_Catons_Rm_Number_BID.pdf • Add1_Catons_Wayfinding_BID.pdf

Contractor to verify wall surfaces and ceiling conditions to receive signage installation and provide recommended mounting attachment per wall surface and ceiling condition. Suspended signs shall be mounted in such a way as to not have excessive movement due to wind or HVAC equipment.

Contractor is responsible for any and all existing signage removal and wall surface restoration coordination as described on Sheets No. 4.6 and 4.7 and within the Technical Specifications.

Screws (3)

Contractor shall obtain final electronic list of occupants for Name Panels from Owner. Contractor shall coordinate required information fields, file type, information style, and format directly with Owner.

VHB Tape

Footer Panel Window Panel 3/16” thk clear matte acrylic, routed as shown to fit within channel created by Header and Footer Panels Edges and Corners: Eased Edges: Flame polished Mounting: Held in place within routed channel created by Header Panel and Footer Panel NOTE: Window Panel and Insert are accessed by removing Header Panel

1040 Hull Street Suite 100 Baltimore, MD 21230 T: 410.347.8500 F: 410.347.8519

Wall Surface

B

Construction Detail - Footer Panel Scale: 1” = 1”

Project Number

Document Title

21134.00

Design Intent Documentation ISSUE FOR BID

Project Name

2”

LEVEL 2 Student Success Center Reading & World Language

A

Front Elevation - D1 Scale: 1/4” = 1”

Suite 203 208

Insert & Copy 1/16” thk white matte lexan Digitally printed copy Color: Match PMS 419U Type: Frutiger LT Std 65 Bold and Frutiger LT Std 55 Roman Copy Height: 1/2” Tall

Footer Panel 5/16” thk pre-finished aluminum, routed as shown to create channel for Window Panel Finish: #220 Inline Edges and Corners: Eased Edges: Brushed Mounting: Screws to Back Plate

Community College of Baltimore County Interior Signage Program

Sheet Title

Sign Type D1 Elevation Views and Details

Date

07.08.2013

Sheet No.

3.12 Copyright © 2012 AYERS | SAINT | GROSS

EQ.

EQ.

1 1/2” OC Set Screws (3)

1 1/2”

1 1/2” OC

Set Screws (3)

EQ. EQ. EQ. EQ.

align

1”

2 1/2”

1”

2 1/2”

1”

Header Panel 9/16” thk pre-finished aluminum, milled as shown to create channel for Window Panel, alignment posts (6), and top edge to accept set screws (tap Header Panel to accept set screws (3) Finish: #220 Inline Edges and Corners: Eased align Edges: Brushed Mounting: Magnetically attached to 1/8” DIA Holes (6), drilled Back Plate w/ alignment posts (6) and to accept Alignment Posts (6) set screws (3) on Header Panel

High Strength Magnets (3) Back Plate is routed to accept Magnets for flush mounting of Header Panel

No. Date

Back Plate 1/4” thk acrylic, routed to accept magnetic strips (3), drilled to accept alignment posts (6), and drilled to accept countersunk screws (3) for mounting Footer Panel Background Process: Surface painted, MP White Edges: Routed, finished smooth and painted PMS 293C Mounting Method: VHB Tape to Wall Surface Wall Surface: Varies

High Strength Magnet Mounted to Back Plate 1/32” thk metal sheeting laminated to back of Header Panel

Threaded Studs Provide threaded studs as required for sign installation

Alignment Posts (6)

Revision

--

Notes These drawings are intended to illustrate design intent only, and should only be used as a general reference guideline. The Contrator bears sole responsibility for the performance and quality of the sign products.

The quality of fit and finish on the final product must meet or exceed the requirements of the design intent documents, sudsequently approved shop drawings, and other changes expressly authorized by Designer.

All materials used are to be as specified and/or meet or exceed all required local and national codes.

All locations shown are approximate. Final sign locations shall be determined during pre-installation walk-through with Owner.

Messages and Locations shown in this document are for general reference only. Refer to message schedules and sign location plans for actual messages.

• Catons_Rm_Number_BID.pdf • Dundalk_Rm_Number_BID.pdf • Essex_Rm_Number_BID.pdf

• Catons_Wayfinding_BID.pdf • Dundalk_Wayfinding_BID.pdf • Essex_Wayfinding_BID.pdf

• Catons_SLP_BID.pdf • Dundalk_SLP_BID.pdf • Essex_SLP_BID.pdf

• Add1_Catons_Rm_Number_BID.pdf • Add1_Catons_Wayfinding_BID.pdf

2’-11 3/4”

Contractor to verify wall surfaces and ceiling conditions to receive signage installation and provide recommended mounting attachment per wall surface and ceiling condition. Suspended signs shall be mounted in such a way as to not have excessive movement due to wind or HVAC equipment.

Contractor shall obtain final electronic list of occupants for Name Panels from Owner. Contractor shall coordinate required information fields, file type, information style, and format directly with Owner.

align

align

align

Contractor is responsible for any and all existing signage removal and wall surface restoration coordination as described on Sheets No. 4.6 and 4.7 and within the Technical Specifications.

High Strength Magnet Mounted to Back Plate

Wall Surface

1040 Hull Street Suite 100 Baltimore, MD 21230 T: 410.347.8500 F: 410.347.8519

1/32” thk metal sheeting laminated to back of Header Panel VHB Tape

3/8”

Header Panel, Window Panel, and Footer Panel must align to form a consistent edge profile, provide 45˚ bevel as shown on all edges of Window Panel and Footer Panel

Project Number

Document Title

21134.00

Design Intent Documentation ISSUE FOR BID

Project Name

Community College of Baltimore County Interior Signage Program

Window Panel 1/8” DIA Holes (3), drilled to accept Screws (3) to secure Footer Panel

align

Construction Detail - Back Plate Scale: 1/4” = 1”

Sign Type D1 Elevation Views and Details 5/16” 1/4”

1”

A

Sheet Title

Insert

B

Construction Detail - Header Panel Scale: 1” = 1”

Date

07.08.2013

Sheet No.

3.13 Copyright © 2012 AYERS | SAINT | GROSS

1’-6” 3 1/4”

3/4” Max. print area 1’-11” tall

2”

No. Date

Classroom & Academic Support Center

-Designer to provide full scale template in Adobe InDesign and/or Adobe Illustrator

2” 1’-11 5/8”

7/8” 7/8”

LOWER LEVEL Office of Judicial Affairs Office of Public Safety Enrollment Services Admissions Office Bursar’s Office Financial Aid Registrar’s Office LEVEL 1 Career Center International Student Services Academic Advisement Center Disability Support Services Testing Center LEVEL 2 Student Success Center Reading & World Language

Revision

Final Layout TBD

001 Suite 003 011 Suite 012 Suite 013 Suite 014 Suite 015

These drawings are intended to illustrate design intent only, and should only be used as a general reference guideline. The Contrator bears sole responsibility for the performance and quality of the sign products.

The quality of fit and finish on the final product must meet or exceed the requirements of the design intent documents, sudsequently approved shop drawings, and other changes expressly authorized by Designer.

Insert & Copy 1/16” thk white matte lexan Digitally printed copy Color: Match PMS 419U Type: Frutiger LT Std 65 Bold and Frutiger LT Std 55 Roman Copy Height: 1/2” Tall Contractor shall provide inserts as specified above for all D1 signs as part of this contract.

Following completion of this project, CCBC may choose to produce inserts in-house via black/white inkjet plotter on paper.

Suite 103 Suite 105 120-156

Notes

The following specifications should be followed

by CCBC when producing inserts in-house via black/white inkjet plotter.:

All materials used are to be as specified and/or meet or exceed all required local and national codes.

All locations shown are approximate. Final sign locations shall be determined during pre-installation walk-through with Owner.

Messages and Locations shown in this document are for general reference only. Refer to message schedules and sign location plans for actual messages.

• Catons_Rm_Number_BID.pdf • Dundalk_Rm_Number_BID.pdf • Essex_Rm_Number_BID.pdf

• Catons_Wayfinding_BID.pdf • Dundalk_Wayfinding_BID.pdf • Essex_Wayfinding_BID.pdf

• Catons_SLP_BID.pdf • Dundalk_SLP_BID.pdf • Essex_SLP_BID.pdf

• Add1_Catons_Rm_Number_BID.pdf • Add1_Catons_Wayfinding_BID.pdf

Contractor to verify wall surfaces and ceiling conditions to receive signage installation and provide recommended mounting attachment per wall surface and ceiling condition. Suspended signs shall be mounted in such a way as to not have excessive movement due to wind or HVAC equipment.

Contractor is responsible for any and all existing signage removal and wall surface restoration coordination as described on Sheets No. 4.6 and 4.7 and within the Technical Specifications.

Contractor shall obtain final electronic list of occupants for Name Panels from Owner. Contractor shall coordinate required information fields, file type, information style, and format directly with Owner.

Material: 35 lb. Heavyweight Inkjet Paper Copy Process: Inkjet, Match PMS 419U Typefaces: Frutiger LT Std 65 Bold and Frutiger LT Std 55 Roman

1040 Hull Street Suite 100 Baltimore, MD 21230 T: 410.347.8500 F: 410.347.8519

131

Suite 203 208

Project Number

Document Title

21134.00

Design Intent Documentation ISSUE FOR BID

Project Name

Community College of Baltimore County Interior Signage Program

Sheet Title

Max. print area 1’-11” tall

A

Graphic Layout - B1 - Insert Scale: 3/8” = 1”

Sign Type D1 Insert Graphic Layout

Date

07.08.2013

Sheet No.

3.14 Copyright © 2012 AYERS | SAINT | GROSS

No. Date

Revision

--

1’-2” Notes These drawings are intended to illustrate design intent only, and should only be used as a general reference guideline. The Contrator bears sole responsibility for the performance and quality of the sign products.

The quality of fit and finish on the final product must meet or exceed the requirements of the design intent documents, sudsequently approved shop drawings, and other changes expressly authorized by Designer.

201-222 Records & Registration Student Services

1’-2”

223-255 Counseling Center

1’-4”

201-222 Records & Registration Student Services

All locations shown are approximate. Final sign locations shall be determined during pre-installation walk-through with Owner.

Messages and Locations shown in this document are for general reference only. Refer to message schedules and sign location plans for actual messages.

• Catons_Rm_Number_BID.pdf • Dundalk_Rm_Number_BID.pdf • Essex_Rm_Number_BID.pdf

• Catons_Wayfinding_BID.pdf • Dundalk_Wayfinding_BID.pdf • Essex_Wayfinding_BID.pdf

• Catons_SLP_BID.pdf • Dundalk_SLP_BID.pdf • Essex_SLP_BID.pdf

• Add1_Catons_Rm_Number_BID.pdf • Add1_Catons_Wayfinding_BID.pdf

Contractor to verify wall surfaces and ceiling conditions to receive signage installation and provide recommended mounting attachment per wall surface and ceiling condition. Suspended signs shall be mounted in such a way as to not have excessive movement due to wind or HVAC equipment.

Contractor is responsible for any and all existing signage removal and wall surface restoration coordination as described on Sheets No. 4.6 and 4.7 and within the Technical Specifications.

Contractor shall obtain final electronic list of occupants for Name Panels from Owner. Contractor shall coordinate required information fields, file type, information style, and format directly with Owner.

223-255 Counseling Center

201-222 Records & Registration Student Services

10”

Financial Aid Center and Additional Text

2’-0”

1’-2”

All materials used are to be as specified and/or meet or exceed all required local and national codes.

1040 Hull Street Suite 100 Baltimore, MD 21230 T: 410.347.8500 F: 410.347.8519

Financial Aid Center and Additional Text

Project Number

Document Title

21134.00

Design Intent Documentation ISSUE FOR BID

Project Name

Community College of Baltimore County Interior Signage Program

A

Front Elevation - D2A Scale: 1/4” = 1”

B

Front Elevation - D2B Scale: 1/4” = 1”

C

Front Elevation - D2C Scale: 1/4” = 1”

Sheet Title

Sign Types D2A, D2B, and D2C Elevation Views Date

07.08.2013

Sheet No.

3.15 Copyright © 2012 AYERS | SAINT | GROSS

1 1/2” OC

1”

1/4”

10 3/4”

No. Date

Revision

2 3/8” OC

--

Notes These drawings are intended to illustrate design intent only, and should only be used as a general reference guideline. The Contrator bears sole responsibility for the performance and quality of the sign products.

The quality of fit and finish on the final product must meet or exceed the requirements of the design intent documents, sudsequently approved shop drawings, and other changes expressly authorized by Designer.

2” OC

Graphic Accent Etched and filled PMS 293C File Name: “L5.eps”

1 1/2” OC

7/8”

1 1/4”

1 5/8”

201-222 Records & Registration Office of College Life & Judicial Services 223-255 Counseling Center

All materials used are to be as specified and/or meet or exceed all required local and national codes.

All locations shown are approximate. Final sign locations shall be determined during pre-installation walk-through with Owner.

Messages and Locations shown in this document are for general reference only. Refer to message schedules and sign location plans for actual messages.

Arrows and Copy 3M Controltac Plus Graphic Films Color: 150C-12 Matte Black Arrow Height: 7/8“ Tall Type: Frutiger LT Std 55 Roman Copy Height: 5/8” Tall, Reference Sheet No. 2.2 for additional information

• Catons_Rm_Number_BID.pdf • Dundalk_Rm_Number_BID.pdf • Essex_Rm_Number_BID.pdf

• Catons_Wayfinding_BID.pdf • Dundalk_Wayfinding_BID.pdf • Essex_Wayfinding_BID.pdf

• Catons_SLP_BID.pdf • Dundalk_SLP_BID.pdf • Essex_SLP_BID.pdf

• Add1_Catons_Rm_Number_BID.pdf • Add1_Catons_Wayfinding_BID.pdf

Contractor to verify wall surfaces and ceiling conditions to receive signage installation and provide recommended mounting attachment per wall surface and ceiling condition. Suspended signs shall be mounted in such a way as to not have excessive movement due to wind or HVAC equipment.

Contractor is responsible for any and all existing signage removal and wall surface restoration coordination as described on Sheets No. 4.6 and 4.7 and within the Technical Specifications.

Wall Surface

Contractor shall obtain final electronic list of occupants for Name Panels from Owner. Contractor shall coordinate required information fields, file type, information style, and format directly with Owner.

Sign Panel 1/16” thk pre-finished aluminum laminated to 3/16” thk acrylic Finish: #220 Inline Edges and Corners: Eased Aluminum Edges: Brushed Acrylic Edges: Surface painted PMS 293C Mounting: VHB Tape to wall surface

1040 Hull Street Suite 100 Baltimore, MD 21230 T: 410.347.8500 F: 410.347.8519

Financial Aid Center and Additional Text

1/32” thk VHB Tape

Project Number

Document Title

21134.00

Design Intent Documentation ISSUE FOR BID

Project Name

Community College of Baltimore County Interior Signage Program

10 1/2” max. message length

Sheet Title

Sign Type D2A, D2B, and D2C Graphic Layout and Side View

A

Graphic Layout - D2A, D2B, and D2C Scale: 1/2” = 1”

B

Side View Scale: 1/2” = 1”

Date

07.08.2013

Sheet No.

3.16 Copyright © 2012 AYERS | SAINT | GROSS

3/4”

C

Plan View Scale: 1/4” = 1”

No. Date

Revision

--

5’-0” 5 3/4”

1/2”

1/2”

5 3/4”

Notes

Logo Graphics (2) Surface screened MP 10269 File Name: “L8.eps” Size: 4.5” x 1.75” Centered Left to Right Between Left Edge of Mounting Bracket and Mounting Rod, Center Top to Bottom within Area

Ceiling heights will vary from location to location, Contractor shall field cut Mounting Rods in the field as required to maintain 80” AFF clearance (Reference Sheet No. 4.4 for Mounting Elevation

Mounting Hardware (2) 1/2” dia aluminum Finish: Satin Mounting: Mechanical fasten to ceiling or ceiling deck, Contractor to verify ceiling conditions, no visible anchor bolts or additional fasteners will be accepted

4 1/2”

Disability Support S Testing Center International Stude

2 7/8”

1’-2”

1’-4 1/8”

The quality of fit and finish on the final product must meet or exceed the requirements of the design intent documents, sudsequently approved shop drawings, and other changes expressly authorized by Designer.

All materials used are to be as specified and/or meet or exceed all required local and national codes.

All locations shown are approximate. Final sign locations shall be determined during pre-installation walk-through with Owner.

In cases where mounting must occur above a dropped finished ceiling, an escutcheon shall be used to match mounting hardware

1/8” 2”

1/8” TYP.

Mounting Rods (2) 1/8” dia aluminum, threaded on Mounting Bracket end Finish: Satin Mounting: Threaded through Mounting Bracket and into Sign Core

These drawings are intended to illustrate design intent only, and should only be used as a general reference guideline. The Contrator bears sole responsibility for the performance and quality of the sign products.

Messages and Locations shown in this document are for general reference only. Refer to message schedules and sign location plans for actual messages.

Sign Panels and Mounting Bracket must align to form a consistent edge profile

varies per location and ceiling condition

1”

Ceiling

• Catons_Rm_Number_BID.pdf • Dundalk_Rm_Number_BID.pdf • Essex_Rm_Number_BID.pdf

• Catons_Wayfinding_BID.pdf • Dundalk_Wayfinding_BID.pdf • Essex_Wayfinding_BID.pdf

• Catons_SLP_BID.pdf • Dundalk_SLP_BID.pdf • Essex_SLP_BID.pdf

• Add1_Catons_Rm_Number_BID.pdf • Add1_Catons_Wayfinding_BID.pdf

Contractor to verify wall surfaces and ceiling conditions to receive signage installation and provide recommended mounting attachment per wall surface and ceiling condition. Suspended signs shall be mounted in such a way as to not have excessive movement due to wind or HVAC equipment.

Contractor is responsible for any and all existing signage removal and wall surface restoration coordination as described on Sheets No. 4.6 and 4.7 and within the Technical Specifications.

Contractor shall obtain final electronic list of occupants for Name Panels from Owner. Contractor shall coordinate required information fields, file type, information style, and format directly with Owner.

1040 Hull Street Suite 100 Baltimore, MD 21230 T: 410.347.8500 F: 410.347.8519 Project Number

Document Title

21134.00

Design Intent Documentation ISSUE FOR BID

Project Name

Community College of Baltimore County Interior Signage Program Mounting Bracket 1/16” thk pre-finished aluminum, bend as shown in Section View, threaded to accept Mounting Rods Finish: #220 Inline Edges and Corners: Eased Edges: Brushed Mounting: Laminated to Mounting Core

A

Front Elevation and Section View - D3A Scale: 1/4” = 1”

Sign Panels (2) 1/16” thk clear matte acrylic Background Process: Second surface painted MP 10269 (between layers) Edges: Flame polished Mounting: Laminated to Mounting Core

Sign Core 1/2” thk sintra Background Process: Surface painted PMS 293C Edges: Routed, finished smooth and painted to match face Mounting: Threaded to accept Mounting Rods

Sheet Title

Sign Type D3A Elevation Views

Date

07.08.2013

Sheet No.

3.17 Copyright © 2012 AYERS | SAINT | GROSS

3/4”

No. Date

--

C

Plan View Scale: 1/4” = 1”

Notes These drawings are intended to illustrate design intent only, and should only be used as a general reference guideline. The Contrator bears sole responsibility for the performance and quality of the sign products.

3’-4” 5 3/4”

1/2”

1/2”

The quality of fit and finish on the final product must meet or exceed the requirements of the design intent documents, sudsequently approved shop drawings, and other changes expressly authorized by Designer.

5 3/4”

All materials used are to be as specified and/or meet or exceed all required local and national codes.

Logo Graphics (2) Surface screened MP 10269 File Name: “L8.eps” Size: 4.5” x 1.75” Centered Left to Right Between Left Edge of Mounting Bracket and Mounting Rod, Center Top to Bottom within Area

Ceiling heights will vary from location to location, Contractor shall field cut Mounting Rods in the field as required to maintain 80” AFF clearance (Reference Sheet No. 4.4 for Mounting Elevation

All locations shown are approximate. Final sign locations shall be determined during pre-installation walk-through with Owner.

• Catons_Rm_Number_BID.pdf • Dundalk_Rm_Number_BID.pdf • Essex_Rm_Number_BID.pdf

• Catons_Wayfinding_BID.pdf • Dundalk_Wayfinding_BID.pdf • Essex_Wayfinding_BID.pdf

In cases where mounting must occur above a dropped finished ceiling, an escutcheon shall be used to match mounting hardware

• Catons_SLP_BID.pdf • Dundalk_SLP_BID.pdf • Essex_SLP_BID.pdf

• Add1_Catons_Rm_Number_BID.pdf • Add1_Catons_Wayfinding_BID.pdf

center copy left to right

4 1/2”

1/8” 2”

1/8” TYP.

Mounting Rods (2) 1/8” dia aluminum, threaded on Mounting Bracket end Finish: Satin Mounting: Threaded through Mounting Bracket and into Sign Core

Mounting Hardware (2) 1/2” dia aluminum Finish: Satin Mounting: Mechanical fasten to ceiling or ceiling deck, Contractor to verify ceiling conditions, no visible anchor bolts or additional fasteners will be accepted

7”

Enrollment Office Mounting Bracket 1/16” thk pre-finished aluminum, bend as shown in Section View, threaded to accept Mounting Rods Finish: #220 Inline Edges and Corners: Eased Edges: Brushed Mounting: Laminated to Mounting Core

Copy (2 sets) 3M Controltac Plus Graphic Films Color: 150C-10 Matte White Type: Frutiger LT Std 55 Roman Copy Height: 2” Tall

Sign Panels (2) 1/16” thk clear matte acrylic Background Process: Second surface painted MP 10269 (between layers) Edges: Flame polished Mounting: Laminated to Mounting Core

Messages and Locations shown in this document are for general reference only. Refer to message schedules and sign location plans for actual messages.

Sign Panels and Mounting Bracket must align to form a consistent edge profile

varies per location and ceiling condition

1”

Ceiling

9 1/8”

Revision

Sign Core 1/2” thk sintra Background Process: Surface painted PMS 293C Edges: Routed, finished smooth and painted to match face Mounting: Threaded to accept Mounting Rods

Contractor to verify wall surfaces and ceiling conditions to receive signage installation and provide recommended mounting attachment per wall surface and ceiling condition. Suspended signs shall be mounted in such a way as to not have excessive movement due to wind or HVAC equipment.

Contractor is responsible for any and all existing signage removal and wall surface restoration coordination as described on Sheets No. 4.6 and 4.7 and within the Technical Specifications.

Contractor shall obtain final electronic list of occupants for Name Panels from Owner. Contractor shall coordinate required information fields, file type, information style, and format directly with Owner.

1040 Hull Street Suite 100 Baltimore, MD 21230 T: 410.347.8500 F: 410.347.8519 Project Number

Document Title

21134.00

Design Intent Documentation ISSUE FOR BID

Project Name

Community College of Baltimore County Interior Signage Program

Sheet Title

A

Front Elevation and Section View - D3B Scale: 1/4” = 1”

Sign Type D3B Elevation Views

Date

07.08.2013

Sheet No.

3.18 Copyright © 2012 AYERS | SAINT | GROSS

1”

Sign Panels and Mounting Bracket must align to form a consistent edge profile

No. Date

Wall Surface

--

Plan View Scale: 1/4” = 1”

C

Revision

Notes These drawings are intended to illustrate design intent only, and should only be used as a general reference guideline. The Contrator bears sole responsibility for the performance and quality of the sign products.

2’-2 1/8” 2” 1/8”

1”

2’-0”

The quality of fit and finish on the final product must meet or exceed the requirements of the design intent documents, sudsequently approved shop drawings, and other changes expressly authorized by Designer.

8 3/4”

Accent Panels (2) 1/16” thk pre-finished aluminum Finish: #220 Inline Edges and Corners: Eased Edges: Brushed Mounting: Laminated to Mounting Core flush to wall surface

Office of Public Safety

Wall Surface

Sign Panels (2) 1/16” thk clear matte acrylic Background Process: Second surface painted MP 10269 (between layers) Edges: Flame polished Mounting: Laminated to Mounting Core Logo Graphics (2) Surface screened MP 10269 File Name: “L8.eps” Size: 1.5” x 1.75”

Front Elevation - D4 Scale: 1/4” = 1”

A

All locations shown are approximate. Final sign locations shall be determined during pre-installation walk-through with Owner.

Mounting Core 3/4” thk sintra Background Process: Surface painted PMS 293C Edges: Routed, finished smooth and painted to match face Mounting: Keyhole Hanging Assembly to Wall Surface - concealed by Accent Panels (2) Wall Surface: Varies

Copy (2 sets) 3M Controltac Plus Graphic Films Color: 150C-10 Matte White Type: Frutiger LT Std 55 Roman Copy Height: 2” Tall

1/8” 1/2”

9”

1/8”

All materials used are to be as specified and/or meet or exceed all required local and national codes.

Messages and Locations shown in this document are for general reference only. Refer to message schedules and sign location plans for actual messages.

• Catons_Rm_Number_BID.pdf • Dundalk_Rm_Number_BID.pdf • Essex_Rm_Number_BID.pdf

• Catons_Wayfinding_BID.pdf • Dundalk_Wayfinding_BID.pdf • Essex_Wayfinding_BID.pdf

• Catons_SLP_BID.pdf • Dundalk_SLP_BID.pdf • Essex_SLP_BID.pdf

• Add1_Catons_Rm_Number_BID.pdf • Add1_Catons_Wayfinding_BID.pdf

Contractor to verify wall surfaces and ceiling conditions to receive signage installation and provide recommended mounting attachment per wall surface and ceiling condition. Suspended signs shall be mounted in such a way as to not have excessive movement due to wind or HVAC equipment.

Contractor is responsible for any and all existing signage removal and wall surface restoration coordination as described on Sheets No. 4.6 and 4.7 and within the Technical Specifications.

B

Side View Scale: 1/4” = 1”

Contractor shall obtain final electronic list of occupants for Name Panels from Owner. Contractor shall coordinate required information fields, file type, information style, and format directly with Owner.

1040 Hull Street Suite 100 Baltimore, MD 21230 T: 410.347.8500 F: 410.347.8519

Center Left to Right within Area

2”

2”

Project Number

Document Title

21134.00

Design Intent Documentation ISSUE FOR BID

D

Graphic Layout - D4 Scale: 3/16” = 1”

align

5 1/2”

align

Office of Public Safety

3”

4”

Project Name

Community College of Baltimore County Interior Signage Program

Admissions

Sheet Title

Sign Type D4 Elevation Views and Graphic Layouts

E

Alt. Layout - D4 Scale: 3/16” = 1”

Date

07.08.2013

Sheet No.

3.19 Copyright © 2012 AYERS | SAINT | GROSS

1”

Wall Surface

Sign Panels and Mounting Bracket must align to form a consistent edge profile

Mounting Core 3/4” thk sintra Background Process: Surface painted PMS 293C Edges: Routed, finished smooth and painted to match face Mounting: Keyhole Hanging Assembly to Wall Surface - concealed by Accent Panels (2) Wall Surface: Varies

Plan View Scale: 1/2” = 1”

A

1’-2 1/8” 2”

1/8”

No. Date

--

Notes These drawings are intended to illustrate design intent only, and should only be used as a general reference guideline. The Contrator bears sole responsibility for the performance and quality of the sign products.

1’-0” 1”

center left to right

Revision

The quality of fit and finish on the final product must meet or exceed the requirements of the design intent documents, sudsequently approved shop drawings, and other changes expressly authorized by Designer.

3 1/2”

1/8”

All materials used are to be as specified and/or meet or exceed all required local and national codes.

All locations shown are approximate. Final sign locations shall be determined during pre-installation walk-through with Owner.

Accent Panels (2) 1/16” thk pre-finished aluminum Finish: #220 Inline Edges and Corners: Eased Edges: Brushed Mounting: Laminated to Mounting Core

Messages and Locations shown in this document are for general reference only. Refer to message schedules and sign location plans for actual messages.

• Catons_Rm_Number_BID.pdf • Dundalk_Rm_Number_BID.pdf • Essex_Rm_Number_BID.pdf

• Catons_Wayfinding_BID.pdf • Dundalk_Wayfinding_BID.pdf • Essex_Wayfinding_BID.pdf

• Catons_SLP_BID.pdf • Dundalk_SLP_BID.pdf • Essex_SLP_BID.pdf

• Add1_Catons_Rm_Number_BID.pdf • Add1_Catons_Wayfinding_BID.pdf

Contractor to verify wall surfaces and ceiling conditions to receive signage installation and provide recommended mounting attachment per wall surface and ceiling condition. Suspended signs shall be mounted in such a way as to not have excessive movement due to wind or HVAC equipment.

Contractor shall obtain final electronic list of occupants for Name Panels from Owner. Contractor shall coordinate required information fields, file type, information style, and format directly with Owner.

Wall Surface

5”

11 3/4”

1’-0”

Contractor is responsible for any and all existing signage removal and wall surface restoration coordination as described on Sheets No. 4.6 and 4.7 and within the Technical Specifications.

Symbols (2 sets) 3M Controltac Plus Graphic Films Color: 150C-10 Matte White Copy Height: 2” Tall

1040 Hull Street Suite 100 Baltimore, MD 21230 T: 410.347.8500 F: 410.347.8519 Project Number

Document Title

21134.00

Design Intent Documentation ISSUE FOR BID

Project Name

Sign Panels (2) 1/16” thk clear matte acrylic Background Process: Second surface painted MP 10269 (between layers) Edges: Flame polished Mounting: Laminated to Mounting Core

1/2”

Community College of Baltimore County Interior Signage Program

1/8”

Sheet Title

A

Front Elevation - D5 Scale: 1/2” = 1”

Logo Graphics (2) Surface screened MP 10269 File Name: “L8.eps” Size: 1.5” x 1.75” Center Left to Right within Area

Sign Type D5 Elevation Views

B

Side View Scale: 1/2” = 1”

Date

07.08.2013

Sheet No.

3.20 Copyright © 2012 AYERS | SAINT | GROSS

Section

MOUNTING ELEVATIONS

4

Copyright © 2012 AYERS | SAINT | GROSS

Wall conditions will vary from location to location and may include drywall, paneling, brick, wood, metal paneling, glass, concrete, etc.

Wall conditions will vary from location to location and may include drywall, paneling, brick, wood, metal paneling, glass, concrete, etc.

Contractor shall field verify wall conditions for each location and submit proposed mounting strategy for approval by Owner and Designer

Contractor shall field verify wall conditions for each location and submit proposed mounting strategy for approval by Owner and Designer

Contractor shall provide vinyl back plate for all glass-mounted locations.

Vinyl back plate shall be a standard vinyl color, match the profile of the sign, and be mounted to same glass surface as sign.

Contractor shall provide vinyl back plate for all glass-mounted locations.

Vinyl back plate shall be a standard vinyl color, match the profile of the sign, and be mounted to same glass surface as sign.

Contractor shall provide rigid back plate for all porous-surface locations.

Rigid back plate shall be min. 0.1875” thk aluminum with countersunk hardware, paint edges to match Sign panel edges

Contractor shall provide rigid back plate for all porous-surface locations.

Rigid back plate shall be min. 0.1875” thk aluminum with countersunk hardware, paint edges to match Sign panel edges

Contractor shall be responsible for identifying glass-mounted and porous-surface mounting locations during the Existing Conditions Survey

Contractor shall be responsible for identifying glass-mounted and porous-surface mounting locations during the Existing Conditions Survey

No. Date

Revision

--

Notes These drawings are intended to illustrate design intent only, and should only be used as a general reference guideline. The Contrator bears sole responsibility for the performance and quality of the sign products.

The quality of fit and finish on the final product must meet or exceed the requirements of the design intent documents, sudsequently approved shop drawings, and other changes expressly authorized by Designer.

All materials used are to be as specified and/or meet or exceed all required local and national codes.

All locations shown are approximate. Final sign locations shall be determined during pre-installation walk-through with Owner.

Messages and Locations shown in this document are for general reference only. Refer to message schedules and sign location plans for actual messages.

• Catons_Rm_Number_BID.pdf • Dundalk_Rm_Number_BID.pdf • Essex_Rm_Number_BID.pdf

• Catons_Wayfinding_BID.pdf • Dundalk_Wayfinding_BID.pdf • Essex_Wayfinding_BID.pdf

• Catons_SLP_BID.pdf • Dundalk_SLP_BID.pdf • Essex_SLP_BID.pdf

• Add1_Catons_Rm_Number_BID.pdf • Add1_Catons_Wayfinding_BID.pdf

Contractor to verify wall surfaces and ceiling conditions to receive signage installation and provide recommended mounting attachment per wall surface and ceiling condition. Suspended signs shall be mounted in such a way as to not have excessive movement due to wind or HVAC equipment.

Contractor is responsible for any and all existing signage removal and wall surface restoration coordination as described on Sheets No. 4.6 and 4.7 and within the Technical Specifications.

Contractor shall obtain final electronic list of occupants for Name Panels from Owner. Contractor shall coordinate required information fields, file type, information style, and format directly with Owner.

Tactile Copy Area

1040 Hull Street Suite 100 Baltimore, MD 21230 T: 410.347.8500 F: 410.347.8519

60” AFF top of all signs

48”-60”

9” OC

60” AFF top of all signs

48”-60”

Tactile Copy Area

9” OC

Project Number

Document Title

21134.00

Design Intent Documentation ISSUE FOR BID

Project Name

Community College of Baltimore County Interior Signage Program

Sheet Title

Sign Types A1, A2, A3, A4, A5, and A5B Mounting Elevations

A

Mounting Elevation - Sign Types A1, A2, A3, and A4 Scale: 3/4” = 1”

B

Mounting Elevation - Sign Types A5 and A5B Scale: 3/4” = 1”

Date

07.08.2013

Sheet No.

4.1 Copyright © 2012 AYERS | SAINT | GROSS

Wall conditions will vary from location to location and may include drywall, paneling, brick, wood, metal paneling, glass, concrete, etc.

Contractor shall field verify wall conditions for each location and submit proposed mounting strategy for approval by Owner and Designer Contractor shall provide vinyl back plate for all glass-mounted locations.

Vinyl back plate shall be a standard vinyl color, match the profile of the sign, and be mounted to same glass surface as sign.

No. Date

Revision

--

Contractor shall provide rigid back plate for all porous-surface locations.

Rigid back plate shall be min. 0.1875” thk aluminum with countersunk hardware, paint edges to match Sign panel edges Notes

Contractor shall be responsible for identifying glass-mounted and porous-surface mounting locations during the Existing Conditions Survey

These drawings are intended to illustrate design intent only, and should only be used as a general reference guideline. The Contrator bears sole responsibility for the performance and quality of the sign products.

The quality of fit and finish on the final product must meet or exceed the requirements of the design intent documents, sudsequently approved shop drawings, and other changes expressly authorized by Designer.

All materials used are to be as specified and/or meet or exceed all required local and national codes.

All locations shown are approximate. Final sign locations shall be determined during pre-installation walk-through with Owner.

Sign Face

Vinyl Back Plate

Messages and Locations shown in this document are for general reference only. Refer to message schedules and sign location plans for actual messages.

Glass Surface

• Catons_Rm_Number_BID.pdf • Dundalk_Rm_Number_BID.pdf • Essex_Rm_Number_BID.pdf

• Catons_Wayfinding_BID.pdf • Dundalk_Wayfinding_BID.pdf • Essex_Wayfinding_BID.pdf

• Catons_SLP_BID.pdf • Dundalk_SLP_BID.pdf • Essex_SLP_BID.pdf

• Add1_Catons_Rm_Number_BID.pdf • Add1_Catons_Wayfinding_BID.pdf

Contractor to verify wall surfaces and ceiling conditions to receive signage installation and provide recommended mounting attachment per wall surface and ceiling condition. Suspended signs shall be mounted in such a way as to not have excessive movement due to wind or HVAC equipment.

Contractor is responsible for any and all existing signage removal and wall surface restoration coordination as described on Sheets No. 4.6 and 4.7 and within the Technical Specifications.

Tactile Copy Area

B

Mounting Sketch - Glass-Mounting Scale: NTS

Contractor shall obtain final electronic list of occupants for Name Panels from Owner. Contractor shall coordinate required information fields, file type, information style, and format directly with Owner.

1040 Hull Street Suite 100 Baltimore, MD 21230 T: 410.347.8500 F: 410.347.8519

60” AFF top of all signs

48”-60”

9” OC

Sign Face

Rigid Back Plate w/ Countersunk Screws

Project Number

Document Title

21134.00

Design Intent Documentation ISSUE FOR BID

Project Name

Wall Surface

Community College of Baltimore County Interior Signage Program

Sheet Title

Sign Types B1, B2, B3, B4, B5, B6, B7, B8, and B10 Mounting Elevation

A

Mounting Elevation - Sign Types B1, B2, B3, B4, B5, B6, B7, B8, and B10 Scale: 3/4” = 1”

C

Mounting Sketch - Porous-Surface Mounting Scale: NTS

Date

07.08.2013

Sheet No.

4.2 Copyright © 2012 AYERS | SAINT | GROSS

Wall conditions will vary from location to location and may include drywall, paneling, brick, wood, metal paneling, glass, concrete, etc.

Wall conditions will vary from location to location and may include drywall, paneling, brick, wood, metal paneling, glass, concrete, etc.

Contractor shall field verify wall conditions for each location and submit proposed mounting strategy for approval by Owner and Designer

Contractor shall field verify wall conditions for each location and submit proposed mounting strategy for approval by Owner and Designer

Contractor shall provide vinyl back plate for all glass-mounted locations.

Vinyl back plate shall be a standard vinyl color, match the profile of the sign, and be mounted to same glass surface as sign.

Contractor shall provide vinyl back plate for all glass-mounted locations.

Vinyl back plate shall be a standard vinyl color, match the profile of the sign, and be mounted to same glass surface as sign.

Contractor shall provide rigid back plate for all porous-surface locations.

Rigid back plate shall be min. 0.1875” thk aluminum with countersunk hardware, paint edges to match Sign panel edges

Contractor shall provide rigid back plate for all porous-surface locations.

Rigid back plate shall be min. 0.1875” thk aluminum with countersunk hardware, paint edges to match Sign panel edges

Contractor shall be responsible for identifying glass-mounted and porous-surface mounting locations during the Existing Conditions Survey

Contractor shall be responsible for identifying glass-mounted and porous-surface mounting locations during the Existing Conditions Survey

No. Date

Revision

--

Notes These drawings are intended to illustrate design intent only, and should only be used as a general reference guideline. The Contrator bears sole responsibility for the performance and quality of the sign products.

The quality of fit and finish on the final product must meet or exceed the requirements of the design intent documents, sudsequently approved shop drawings, and other changes expressly authorized by Designer.

All materials used are to be as specified and/or meet or exceed all required local and national codes.

All locations shown are approximate. Final sign locations shall be determined during pre-installation walk-through with Owner.

Messages and Locations shown in this document are for general reference only. Refer to message schedules and sign location plans for actual messages.

201-222 Records & Registration Student Services

131

Suite 203 208

40”-70”

Suite 103 Suite 105 120-156

201-222 Records & Registration Student Services

201-222 Records & Registration Student Services

223-255 Counseling Center

223-255 Counseling Center

Financial Aid Center and Additional Text

Financial Aid Center and Additional Text

• Catons_SLP_BID.pdf • Dundalk_SLP_BID.pdf • Essex_SLP_BID.pdf

• Add1_Catons_Rm_Number_BID.pdf • Add1_Catons_Wayfinding_BID.pdf

Contractor is responsible for any and all existing signage removal and wall surface restoration coordination as described on Sheets No. 4.6 and 4.7 and within the Technical Specifications.

Contractor shall obtain final electronic list of occupants for Name Panels from Owner. Contractor shall coordinate required information fields, file type, information style, and format directly with Owner.

1040 Hull Street Suite 100 Baltimore, MD 21230 T: 410.347.8500 F: 410.347.8519

70” AFF align with top of all signs

70” AFF align with graphic accent

LEVEL 2 Student Success Center Reading & World Language

001 Suite 003 011 Suite 012 Suite 013 Suite 014 Suite 015

Min. 5/8” Visual Character Area

Min. 5/8” Visual Character Area

40”-70”

Classroom & Academic Support Center

LEVEL 1 Career Center International Student Services Academic Advisement Center Disability Support Services Testing Center

• Catons_Wayfinding_BID.pdf • Dundalk_Wayfinding_BID.pdf • Essex_Wayfinding_BID.pdf

Contractor to verify wall surfaces and ceiling conditions to receive signage installation and provide recommended mounting attachment per wall surface and ceiling condition. Suspended signs shall be mounted in such a way as to not have excessive movement due to wind or HVAC equipment.

2 LOWER LEVEL Office of Judicial Affairs Office of Public Safety Enrollment Services Admissions Office Bursar’s Office Financial Aid Registrar’s Office

• Catons_Rm_Number_BID.pdf • Dundalk_Rm_Number_BID.pdf • Essex_Rm_Number_BID.pdf

Project Number

Document Title

21134.00

Design Intent Documentation ISSUE FOR BID

Project Name

Community College of Baltimore County Interior Signage Program

Sheet Title

Sign Types D1, D2A, D2B, and D2C Mounting Elevations

A

Mounting Elevation - Sign Type D1 Scale: 3/4” = 1”

B

Mounting Elevation - Sign Types D2A, D2B, D2C Scale: 3/4” = 1”

Date

07.08.2013

Sheet No.

4.3 Copyright © 2012 AYERS | SAINT | GROSS

Ceiling heights will vary from location to location, and may not be plumb and level

Contractor shall cut Mounting Rods in the field as required to maintain level 80” AFF clearance

Contractor shall cut Mounting Rods in the field as required to maintain level 80” AFF clearance

Ceiling conditions will vary from location to location and may include drop-ceiling tile systems, drywall, concrete, etc.,

Ceiling conditions will vary from location to location and may include drop-ceiling tile systems, drywall, concrete, etc.,

Contractor shall field verify ceiling conditions for each location and submit proposed mounting strategy for approval by Owner and Designer

Contractor shall field verify ceiling conditions for each location and submit proposed mounting strategy for approval by Owner and Designer

Contractor shall identify any locations that do not meet the minimum mounting requirements detailed below

Contractor shall identify any locations that do not meet the minimum mounting requirements detailed below

No. Date

Revision

--

Notes These drawings are intended to illustrate design intent only, and should only be used as a general reference guideline. The Contrator bears sole responsibility for the performance and quality of the sign products.

The quality of fit and finish on the final product must meet or exceed the requirements of the design intent documents, sudsequently approved shop drawings, and other changes expressly authorized by Designer.

Min. 3”

Min. 3”

Ceiling heights will vary from location to location, and may not be plumb and level

All materials used are to be as specified and/or meet or exceed all required local and national codes.

All locations shown are approximate. Final sign locations shall be determined during pre-installation walk-through with Owner.

Disability Support Services Testing Center International Student Services

Enrollment Office

Messages and Locations shown in this document are for general reference only. Refer to message schedules and sign location plans for actual messages.

• Catons_Rm_Number_BID.pdf • Dundalk_Rm_Number_BID.pdf • Essex_Rm_Number_BID.pdf

• Catons_Wayfinding_BID.pdf • Dundalk_Wayfinding_BID.pdf • Essex_Wayfinding_BID.pdf

• Catons_SLP_BID.pdf • Dundalk_SLP_BID.pdf • Essex_SLP_BID.pdf

• Add1_Catons_Rm_Number_BID.pdf • Add1_Catons_Wayfinding_BID.pdf

Contractor to verify wall surfaces and ceiling conditions to receive signage installation and provide recommended mounting attachment per wall surface and ceiling condition. Suspended signs shall be mounted in such a way as to not have excessive movement due to wind or HVAC equipment.

Contractor is responsible for any and all existing signage removal and wall surface restoration coordination as described on Sheets No. 4.6 and 4.7 and within the Technical Specifications.

80” AFF to bottom of sign

80” AFF to bottom of sign

Contractor shall obtain final electronic list of occupants for Name Panels from Owner. Contractor shall coordinate required information fields, file type, information style, and format directly with Owner.

1040 Hull Street Suite 100 Baltimore, MD 21230 T: 410.347.8500 F: 410.347.8519 Project Number

Document Title

21134.00

Design Intent Documentation ISSUE FOR BID

Project Name

Community College of Baltimore County Interior Signage Program

Sheet Title

Sign Types D3A and D3B Mounting Elevation

A

Mounting Elevation - Sign Type D3A Scale: 3/4” = 1”

B

Mounting Elevation - Sign Type D3B Scale: 3/4” = 1”

Date

07.08.2013

Sheet No.

4.4 Copyright © 2012 AYERS | SAINT | GROSS

Ceiling heights will vary from location to location, and may not be plumb and level

Ceiling heights will vary from location to location, and may not be plumb and level

Contractor shall provide shims in the field as required to maintain level 80” AFF clearance

Contractor shall provide shims in the field as required to maintain level 80” AFF clearance

Wall conditions will vary from location to location and may include drywall, paneling, brick, wood, glass, metal panel, concrete, etc.

Wall conditions will vary from location to location and may include drywall, paneling, brick, wood, glass, metal panel, concrete, etc.

Contractor shall field verify wall conditions for each location and submit proposed mounting strategy for approval by Owner and Designer

Contractor shall field verify wall conditions for each location and submit proposed mounting strategy for approval by Owner and Designer

No. Date

Revision

--

Notes These drawings are intended to illustrate design intent only, and should only be used as a general reference guideline. The Contrator bears sole responsibility for the performance and quality of the sign products.

The quality of fit and finish on the final product must meet or exceed the requirements of the design intent documents, sudsequently approved shop drawings, and other changes expressly authorized by Designer.

All materials used are to be as specified and/or meet or exceed all required local and national codes.

All locations shown are approximate. Final sign locations shall be determined during pre-installation walk-through with Owner.

Messages and Locations shown in this document are for general reference only. Refer to message schedules and sign location plans for actual messages.

Office of Public Safety

• Catons_Rm_Number_BID.pdf • Dundalk_Rm_Number_BID.pdf • Essex_Rm_Number_BID.pdf

• Catons_Wayfinding_BID.pdf • Dundalk_Wayfinding_BID.pdf • Essex_Wayfinding_BID.pdf

• Catons_SLP_BID.pdf • Dundalk_SLP_BID.pdf • Essex_SLP_BID.pdf

• Add1_Catons_Rm_Number_BID.pdf • Add1_Catons_Wayfinding_BID.pdf

Contractor to verify wall surfaces and ceiling conditions to receive signage installation and provide recommended mounting attachment per wall surface and ceiling condition. Suspended signs shall be mounted in such a way as to not have excessive movement due to wind or HVAC equipment.

Contractor is responsible for any and all existing signage removal and wall surface restoration coordination as described on Sheets No. 4.6 and 4.7 and within the Technical Specifications.

80” AFF to bottom of sign

80” AFF to bottom of sign

Contractor shall obtain final electronic list of occupants for Name Panels from Owner. Contractor shall coordinate required information fields, file type, information style, and format directly with Owner.

1040 Hull Street Suite 100 Baltimore, MD 21230 T: 410.347.8500 F: 410.347.8519 Project Number

Document Title

21134.00

Design Intent Documentation ISSUE FOR BID

Project Name

Community College of Baltimore County Interior Signage Program

Sheet Title

Sign Types D4 and D5 Mounting Elevations

A

Mounting Elevation - Sign Type D4 Scale: 3/4” = 1”

B

Mounting Elevation - Sign Type D5 Scale: 3/4” = 1”

Date

07.08.2013

Sheet No.

4.5 Copyright © 2012 AYERS | SAINT | GROSS

Contractor’s Scope of Work shall include removal of all existing Room Identification Signs and removal of all interfering items including but not limited to: signs, notices, posters, bulletin boards, etc. that fall within the removal area as described below.

Contractor’s Scope of Work shall include removal of all existing Key Destination / Wayfinding Signs (ceiling or wall mounted), and removal of all interfering items including but not limited to: signs, notices, posters, bulletin boards, etc. that fall within the removal area as described below.

Contractor shall coordinate directly with Owner for disposal or delivery of all removed items.

Contractor shall coordinate directly with Owner for disposal or delivery of all removed items.

Contractor’s Scope of Work shall also include restoration (patching, cleaning, painting, and repairing walls and ceilings) of any and all resultant damaged surfaces to match original material.

Contractor’s Scope of Work shall also include restoration (patching, cleaning, painting, and repairing walls and ceilings) of any and all resultant damaged surfaces to match original material.

Contractor shall identify any electrical conflicts and coordinate directly with w/ Owner.

Contractor shall identify any electrical conflicts and coordinate directly with w/ Owner.

Attain Owner’s approval prior to all restoration activities.

Attain Owner’s approval prior to all restoration activities.

No. Date

Revision

--

Notes These drawings are intended to illustrate design intent only, and should only be used as a general reference guideline. The Contrator bears sole responsibility for the performance and quality of the sign products.

The quality of fit and finish on the final product must meet or exceed the requirements of the design intent documents, sudsequently approved shop drawings, and other changes expressly authorized by Designer.

All materials used are to be as specified and/or meet or exceed all required local and national codes.

4’-0”

All locations shown are approximate. Final sign locations shall be determined during pre-installation walk-through with Owner.

Messages and Locations shown in this document are for general reference only. Refer to message schedules and sign location plans for actual messages.

2’-0”

• Catons_Rm_Number_BID.pdf • Dundalk_Rm_Number_BID.pdf • Essex_Rm_Number_BID.pdf

• Catons_Wayfinding_BID.pdf • Dundalk_Wayfinding_BID.pdf • Essex_Wayfinding_BID.pdf

• Catons_SLP_BID.pdf • Dundalk_SLP_BID.pdf • Essex_SLP_BID.pdf

• Add1_Catons_Rm_Number_BID.pdf • Add1_Catons_Wayfinding_BID.pdf

3’-0”

Existing Sign Area Removal and Wall Surface Restoration Area

5’-0”

Contractor to verify wall surfaces and ceiling conditions to receive signage installation and provide recommended mounting attachment per wall surface and ceiling condition. Suspended signs shall be mounted in such a way as to not have excessive movement due to wind or HVAC equipment.

Existing Sign Area Removal and Wall Surface Restoration Area

Contractor is responsible for any and all existing signage removal and wall surface restoration coordination as described on Sheets No. 4.6 and 4.7 and within the Technical Specifications.

Contractor shall obtain final electronic list of occupants for Name Panels from Owner. Contractor shall coordinate required information fields, file type, information style, and format directly with Owner.

20.0 sq. ft.

1040 Hull Street Suite 100 Baltimore, MD 21230 T: 410.347.8500 F: 410.347.8519

5.0 sq. ft.

Project Number

Document Title

21134.00

Design Intent Documentation ISSUE FOR BID

Community College of Baltimore County Interior Signage Program

3’-0”

3’-0”

Project Name

Sheet Title

Existing Signage Removal / Restoration Elevations

A

Removal / Restoration Elevation - Room Identification Signs Scale: 3/4” = 1”

B

Removal / Restoration Elevation - Key Destination / Wayfinding Signs Scale: 3/4” = 1” (Wall Mounted)

Date

07.08.2013

Sheet No.

4.6 Copyright © 2012 AYERS | SAINT | GROSS

Contractor’s Scope of Work shall include removal of all existing Key Destination / Wayfinding Signs (ceiling or wall mounted), and removal of all interfering items including but not limited to: signs, notices, posters, bulletin boards, etc. that fall within the removal area as described below.

Contractor’s Scope of Work shall include removal of all existing Key Destination / Wayfinding Signs (ceiling or wall mounted), and removal of all interfering items including but not limited to: signs, notices, posters, bulletin boards, etc. that fall within the removal area as described below.

Contractor shall coordinate directly with Owner for disposal or delivery of all removed items.

Contractor shall coordinate directly with Owner for disposal or delivery of all removed items.

Contractor’s Scope of Work shall also include restoration (patching, cleaning, painting, and repairing walls and ceilings) of any and all resultant damaged surfaces to match original material.

Contractor’s Scope of Work shall also include restoration (patching, cleaning, painting, and repairing walls and ceilings) of any and all resultant damaged surfaces to match original material.

No. Date

Contractor shall identify any electrical conflicts and coordinate directly with w/ Owner.

Contractor shall identify any electrical conflicts and coordinate directly with w/ Owner.

--

Attain Owner’s approval prior to all restoration activities.

Attain Owner’s approval prior to all restoration activities.

2’-0”

2’-0”

Revision

Notes These drawings are intended to illustrate design intent only, and should only be used as a general reference guideline. The Contrator bears sole responsibility for the performance and quality of the sign products.

2’-0”

The quality of fit and finish on the final product must meet or exceed the requirements of the design intent documents, sudsequently approved shop drawings, and other changes expressly authorized by Designer.

Existing Sign Area Removal and Ceiling Restoration Area

4’-0”

For ceiling mounted sign locations remove and restore both sides of corridor as shown

varies per location and ceiling condition

For flag mounted sign locations remove and restore wall surface that new sign will be located on only

For flag mounted sign locations remove and restore ceiling as shown above wall surface that new sign will be located on only

Existing Sign Area Removal and Ceiling Restoration Area

All locations shown are approximate. Final sign locations shall be determined during pre-installation walk-through with Owner.

Messages and Locations shown in this document are for general reference only. Refer to message schedules and sign location plans for actual messages.

• Catons_Rm_Number_BID.pdf • Dundalk_Rm_Number_BID.pdf • Essex_Rm_Number_BID.pdf

• Catons_Wayfinding_BID.pdf • Dundalk_Wayfinding_BID.pdf • Essex_Wayfinding_BID.pdf

• Catons_SLP_BID.pdf • Dundalk_SLP_BID.pdf • Essex_SLP_BID.pdf

• Add1_Catons_Rm_Number_BID.pdf • Add1_Catons_Wayfinding_BID.pdf

Contractor to verify wall surfaces and ceiling conditions to receive signage installation and provide recommended mounting attachment per wall surface and ceiling condition. Suspended signs shall be mounted in such a way as to not have excessive movement due to wind or HVAC equipment.

Contractor is responsible for any and all existing signage removal and wall surface restoration coordination as described on Sheets No. 4.6 and 4.7 and within the Technical Specifications.

Contractor shall obtain final electronic list of occupants for Name Panels from Owner. Contractor shall coordinate required information fields, file type, information style, and format directly with Owner.

For ceiling mounted sign locations remove and restore ceiling the entire width of corridor as shown

1040 Hull Street Suite 100 Baltimore, MD 21230 T: 410.347.8500 F: 410.347.8519 Project Number

Document Title

21134.00

Design Intent Documentation ISSUE FOR BID

60”

varies per location and ceiling condition

Existing Sign Area Removal and Wall Surface Restoration Area

All materials used are to be as specified and/or meet or exceed all required local and national codes.

Project Name

Community College of Baltimore County Interior Signage Program

Sheet Title

Existing Signage Removal / Restoration Elevations Date

A

Removal / Restoration Elevation - Key Destination / Wayfinding Signs Scale: 3/4” = 1” (Ceiling and Flag Mounted)

B

Removal / Restoration Refl. Ceiling Plan - Key Dest. / Wayfinding Signs Scale: 3/4” = 1” (Ceiling and Flag Mounted)

07.08.2013

Sheet No.

4.7 Copyright © 2012 AYERS | SAINT | GROSS