Envosort Trade Catalogue

Everything for the Mailroom & Back OfďŹ ce

Series 90 Benching:

Flexibuild:

Flexibuild in a Secure Cupboard:

Trolleys:

Heavy-duty storage/bench solutions.

Bestselling postal sorting solutions.

Keep your post or security documents secure.

Top quality mailroom trolleys and sack holders.

See page 2

See page 4

See page 13

See page 8

SERIES 90 BENCHING

Series 90 Heavy Duty Benching: the top-value range for reprographic, print and mailrooms Series 90 features: • All units constructed with rugged steel frame, 50mm x 25mm, epoxy powder coated • Splinter-proof tops made from 28, furniture-grade wood chipboard, faced with smart grey laminate • Benches available in four standard lengths: 900, 1200, 1500 and 1800mm (we can also manufacture custom units any length up to 1950mm) • Choose from 750mm (sitting) or 900mm (standing) heights • Standard bench tops in choice of 750 and 900mm depths • All benches fitted with adjustable feet for levelling on uneven floor surfaces • Benches supplied assembled with top unattached to allow unrestricted access through doors (tops pre drilled for easy fitting, fastenings provided)

Open Bench Exceptional strength and stability with open storage below.

OPEN BENCH Sitting Height

3BEOB

Standing Height

3BEOB

Bench length available in: 900mm, 1200mm, 1500mm, 18000mm

Rounded corners available to order on corner or island units, with extended tops for additional health and safety For enhanced mailroom flexibility, all units can be supplied with 2 braked and 2 unbraked castors AVAILABLE IN TWO HEIGHTS:

TOPS AVAILABLE IN TWO DEPTHS:

Sitting Height

750mm

Standard

750mm

Sitting Height

900mm

Extra Deep

900mm

Also available are freestanding corner units, ideal for filling in corners where you have a run of benches/cupboards. Corner units allow for skirting so tops fit flush to the wall.

2

BEST SELLER Open Bench with Bottom Shelf Full-size lower shelf adds off-the-floor storage and further increases structural strength of unit.

OPEN BENCH WITH BOTTOM SHELF Sitting Height

3BEBA

Standing Height

3BEBB

Bench length available in: 900mm, 1200mm, 1500mm, 18000mm

SERIES 90 BENCHING

BEST SELLER

Cupboard with Sliding Lockable Doors

Open Unit with Centre Shelf With end and back panel plus a second shelf for enhanced storage.

Fully-enclosed standard bench with end panels and securable sliding door access. Cupboards available with tambour doors to order.

OPEN UNIT WITH CENTRE SHELF 3BESA Sitting Height 3BESB Standing Height

CUPBOARD WITH SLIDING LOCKABLE DOORS

Bench length available in: 1200mm, 1500mm, 18000mm

3BECA

Sitting Height

3BECB

Standing Height

Bench length available in: 1200mm, 1500mm, 18000mm

Mobile Unit Here the name of the game is flexibility. Four robust rubber castors (2 braked) enable units to be located wherever required, allowing mailroom layout to be reconfigured for various tasks. Upstand not included (available as option) MOBILE UNIT: 3BEMUA 3BEMUB

Sitting Height Standing Height

4/6 Locker Units Organised, secure storage for supplies, equipment or mailroom staff’s personal possessions.

4/6 LOCKER UNITS

Mobile Unit available in lengths: 1200mm, 1500mm, 18000mm Upstand available (100mm high) per 300mm Upstand available (150mm high) per 300mm

3BELA

Sitting Height

3BELB

Standing Height

Bench length available in: 1200mm (4 Locker) 1500mm (6 Locker)

Mobile Pedestals Choose from two, three or four drawer units in various configurations. All drawers lock with single key (see below).

Code: Description: 3BEMPED2A 2 Drawer unit, 1 deep 1 standard drawer 3BEMPED1A 3 drawer unit, 3 standard drawers 3BEMPB 3 drawer unit, 1 deep 2 standard drawers 3BEMPED4B 4 drawer unit, 4 standard drawers

Height: (Sitting) (Sitting) (Standing) (Standing)

3

FLEXIBUILD SORT UNITS

18 Compartmental unit

Flexibuild Modular Sorting System:

915mm column height

best-selling postal sorting solution

BEST SELLER

The optimum instant solution for equipping today’s busy mailroom or office, our modular Flexibuild system easily assembles into size-adjustable compartments for sorting mail, sales literature or record filing. The plasticcoated wire mesh frames provide a clear view of the contents so letters, message slips or small envelopes cannot get overlooked or mislaid.

Delivered in self-assembly flat packs, the system can be expanded at any time with extra columns and shelves, allowing it to expand to growing mail volumes or number of staff.

What’s more, the sort units easily configure to suit any available space, including island, corner or U-shape.

Our two most popular kits contain 18 or 24 compartments. Extra shelves and columns (offered SEE PAGE 6 FOR seperately, see below) Flexibuild can be added indefinitely, ACCESSORIES now or in the future.

18 COMPARTMENT STARTER KIT A4 EASI SORT (18) Shelf width: 318(w) x 343(d)mm 3SCS03 18 COMPARTMENT KIT 3SCS03EC ADDITIONAL COLUMNS* with 6 compartments 3SCSV3 EXTRA SHELVES - pack of 5 Quick and easy self assembly * An additional column consists of one side frame, one rear panel and six shelves.

4

18 Compartmental unit

FLEXIBUILD SORT UNITS

Both 18 & 24 Compartment FLEXIBUILD features include: • Units offered in two heights: 915mm (18 compartments) and 1016mm (24 compartments) • All shelf heights adjustable in 25mm increments

1016mm column height

• Constructed of polythene-coated panels of mild steel wire mesh • See-through compartments give clear view of contents, eliminating mislaid mail • Mesh improves mailroom environment by allowing sunlight and airflow to pass through • Standard colour grey • Configurable to suit any office shape • Available with base support, enabling franking machine or large parcels to be stored underneath the sort unit - see below • Starter kits comprise side and rear panels plus shelves • Flat-packed for easy self-assembly

SEE PAGE 6 FOR

Flexibuild ACCESSORIES

24 COMPARTMENT STARTER KIT A4 EASI SORT (24) Shelf width: 318 (w) x 343 (d) mm 3SCS06 24 COMPARTMENT KIT - as pictured above 3SCS06EC ADDITIONAL COLUMNS* with 8 compartments 3SCSV3 EXTRA SHELVES - pack of 5 * An additional column consists of one side frame, one rear panel and eight shelves.

OPEN BASE SUPPORT FRAME: for A4 Easi Sort Starter Kit (as pictured above) Create extra work space under Flexibuild Sort Units using a Flexibuild Base Support

3SCBF03C3 Open base support frame for A4 Easi Sort Starter Kit 5

FLEXIBUILD ACCESSORIES

Flexibuild Header Board: for instant

ID of each person’s mail

These clear acrylic label holders attach without tools to the top of Flexibuild columns so the mailroom operative can quickly identify the correct place for each item of post. The result?

Faster sorting and a lot less mistakes. Designed to hold an A4 sheet, header boards are an ideal way to label sort units with more than one name.

• Scalloped sides make it easy to insert and remove lists, allowing regular updating • Tough transparent acrylic sheet holds lists flat and upright for easy legibility • Fits A4 size paper - more space for information than ordinary labels

C3HEADER Flexibuild Header Board

Flexi-Rail System: the infallible

wall-hanging kit for Flexibuild sort units No floor space for a bench on which to mount a sort unit/? Then make the most of the available space in your mailroom by hanging it securely on the wall. Ideal for mailrooms, satellite sorting areas or small offices - anywhere space is at a premium.

3WMFLEX Wall Mount Kit £83.00 For a single 18 or 24 compartment Flexibuild Starter Kit. 3 or 4 columns, 318mm wide / 3 column or 241mm / 4 columns.

• Super-secure method of wall mounting, designed to free up floor space

Flexibuild Ring Labels: purpose-made for Flexibuild units Organise and accelerate the mail sorting process using ring labels. Flexibuild’s own ring labels comprise a rigid plastic label with two stainless steel fixing rings (included).

The plastic surface can be written on directly or labelled.

• Either for hand-writing or use with label marker • Rings unclip to fix onto mesh sort unit • Available in a range of colours for efficient colour-coded sorting.

3SRL1 Flexibuild Ring Labels (pack of 5) Stock Colours:

DK BLUE

DK GREEN

YELLOW

GREY

BLACK

RED

• Quick and easy to install • Rails manufactured from heavy-duty anodised aluminium extrusion • Supplied pre-drilled with fixing holes • Modern snap-on anodised front covers • End stops provide attractive cover for end of rail

Standard Electric height Adjustable Table: Adapts to suit the user or the task.

Ideally suited to different users on different shifts, the table removes the need for unnecessary straining or bending.

• Available in 6 versatile sizes • Simply press a button on the fold-away keypad to raise or lower the table • Height range: 650-1310mm • 90kg weight capacity • Quiet electric motors, encased in triple action • Epoxy powder-coated frame, telescopic towers 28mm melamine face worktop • Optional cable management • Choice of lengths: 1200, 1500 or 1800mm. tray and castors • Choice of widths: 750 or 900mm

6

Electric Height Adjustment Bench 3EHB1200C 1200(l) x 750(d) mm 3EHB1200EWC 1200(l) x 900(d) mm 3EHB1500C 1500(l) x 750(d) mm 3EHB1500EWC 1500(l) x 900(d) mm 3EHB1800C 1800(l) x 750(d) mm 3EHB1800EWC 1800(l) x 900(d) mm

WHITE

CLEARVIEW STORAGE

The Clearview concept: configurable sorting shelves with no hiding place!

Made from sturdy transparent acrylic, Clearview shelving provides one of the most efficient ways to sort mail and store documents. Because you can see straight through each shelf means that no important letters or documents can be accidently overlooked - and as the clear shelves are also instantly adjustable within the vertical columns, you can configure the size and layout of the units to your needs. What’s more, scalloped-edge front slots make it easy to label each compartment.

• Maximum capcity of 40 compartments each 335mm(d) x 277mm(w) (A4) and 100mm(h) - or opt for fewer compartments with a larger capacity.

• Transparent, removable shelves fitted with scallopededge slot to accommodate a paper or card label.

• Frame made from 18mm melamine-faced chipboard with solid back; finished in Grey.

• Overall dimensions of unit: 1200mm(l) x 1048mm(h) x 360mm(d) 3CVSU Clearview Sorting unit (supplied with 16 shelves) 3CVSU/SHELF/PK5 Extra shelves per pack of 5 3CVSUBE0120B Clearview Sorting unit (16 shelves included) and Series 90 Open Bench with bottom shelf (pictured below) 1200mm(l) x 900mm(h) x 750mm(d)

Clearview with lockable tambour doors: the secure hideaway sorting solution Need more security for your mail or documents? Or just prefer to tidy things away out of sight? Then Clearview Sorting is also available inside a 1500mm wide unit with lockable tambour doors, custom-designed to stand on a Series 90 bench or similar work surface.

You can order the tambour-doored freestanding unit on its own - or combine it with a Series 90 lockable cupboard. Whichever you choose, you can add to the number of compartments by ordering packs of 5 extra Clearview shelves.

Additional Clearview shelves available in packs of 5 SEE PAGE 2 FOR MORE

BENCHING UNITS

3CVSUTAMBOUR Clearview Sorting unit (16 shelves included) with tambour doors: overall 1500mm(l) x 1048mm(h) x 470mm(d) 3CVSUTAMBEC150B Clearview Sorting unit (16 shelves included) with tambour doors and Series 90 cupboard with sliding lockable doors 1500mm(l) x 900mm(h) x 750mm(d) as shown 3CVSU / SHELF / PK5 Extra shelves per pack of 5 Clearview Sorting with tambour doors and 1500mm Series 90 Cupboard

Clearview Sorting Unit and Series 90 Open Bench with bottom shelf 7

CLASSIC TROLLEYS

Premium quality indoor range

Classic Minor: top-selling compact trolley for indoor use

Minor

The Minor may be the baby in the Classic range but repeated sales make it a long-term mainstay in workplaces across the UK. Designed for use in locations where space is limited, the Minor is smaller and lighter than others in the range - but it’s big on quality and features. To prove the point, hundreds of Minors are used daily in supermarkets to carry cash canisters around the stores • Lightweight & compact yet with high load capacity.

• Hook-on baskets remove for loading • 2 steel mesh nesting baskets with tough white nylon coating • Baskets accommodate concertina files • Fully-welded steel tube frame • Front swivel castors, rear wheels on solid axle • Plastic comfort handgrips • Sheet steel base for moving bulky items

3TRMIN

Senior: High-spec general purpose trolley

Optional Accessories: trolley cover *(see below), concertina filepacks

This heavy-duty product is by far the most popular trolley we sell. The ergonomic design features two large staggered baskets, allowing easy access to both tiers - and it’s the only model in the Classic range with all-round buffering. Outstanding durability and a host of smart features make it the No.1 choice for transportation of mail, medical records, packages, stationery and more. Add the concertina pack to change function into a file trolley - and increase capacity with the optional rear pannier.

3TRSEN

Classic Minor

Classic Senior

Optional Accessories: rear pannier, concertina, filepacks, trolley cover* (see right).

Senior features: • Removable, sturdy, large-capacity nesting baskets • Staggered baskets for improved access • Ultra-robust, fully-welded, rectangular-section steel frame • Manoeuvrable swivel castors • Additional revolving buffers for front wheels • Non-marking buffering on front and sides • Scratch resistant epoxy powder-coated finish • Comfort-grip handle securely bolted onto frame • Rear stub axles prevent injury when pushing Trolley Cover

CLASSIC & GT TROLLEY ACCESSORIES

Trolley Accessories: Panniers and platforms

Add load space to your GT1, GT2 or Classic Senior trolley with an extra-deep rear pannier basket (see specification table on page 13 for dimensions). Or change the load-carrying function of the trolley altogether by adding a tough laminate base platform (GT1/GT2 only).

3TCPAN Rear Pannier (GT1/GT2/Senior) 3YGT1BASE Laminate Platform (GT1) 3YGT2BASE Laminate Platform (GT2)

8

Concertina Filepacks:

Drop in an instant filing system

• Protective water-resistant trolley cover • Protects contents from the elements 3TCGT2COV Trolley Cover for GT2 3TCGT3COV Trolley Cover for GT3* * Not shown. Additional sizes available. Call for full details.

Designed for the GT and Classic ranges, these expandable starter filepacks keep you trolley perfectly organised when distributing post or file-based items such as medical records. Durable, versatile and with high capacity, concertina-style files are an inexpensive way to increase the functionality of your trolley.

Concertina Filepacks feature: 3CCON1 File Starter park (for GT1/Classic Minor) Includes: 1 set file rods, set of 5 concertina files, 5 label holders

3CCON2 File Starter park (for GT2/Classic Senior) Contents as above

3CCON3 File Starter park (for GT3) Contents as above Also available individually

3TRCFR Concertina File (Set of 5) 3BASORTLH Label Holders (Set of 5)

• Hardwearing PVC-coated nylon files wipe clean • Plastic-coated horizontal rods hold files secure • Polypropylene-moulded label holders easily identify contents

GT TROLLEYS

Study trolleys for use indoors and out

GT2 with easy-access tilting basket

BEST SELLER

Combining durable construction, high capacity and great value, our top-selling GT2 is a general-purpose trolley that’s also suitable for outdoor use. Special features include a unique tilting upper basket for easy access to the lower basket and all-round buffering to protect doors, walls and furniture. If you’re looking for a versatile, long-lasting trolley for transportation of mail, documents, records or packages, this intelligentlydesigned product is always the front runner.

Unique easy-access

Scratch-resistant epoxy powder-coated finish

Huge 100kg load capacity

Optional back pannier fitted

tilting mechanism

3TRGT2/2 GT2 (main picture) 3TRGT2/C GT2 Easi-Store (inset)

High-capacity, removable/nesting baskets

Optional Accessories: concertina filepack, rear pannier basket, laminate base platform for larger items, trolley cover

GT2 Easi-Store If you’re short of storage space, the GT2 is also available in this unique fold-down format, designed to fit snugly under an open bench when not in use. All other features as standard GT2. (optional laminate base platform for larger items as shown, not included).

Lower frame fitted with non-marking white buffering

Laminate base platform is an optional extra on the GT1 & GT2 - see page 12 for details

GT1

200mm solid rubber rear 125mm wheels on stub axles to front prevent injury swivel castors Long wheelbase for increased capacity

GT1 - sturdy, compact & manoeuvrable

Designed for locations where space to move around is at a premium. the short-wheelbase GT1 boasts the same robust construction as its bigger brother. Although primarily designed for the mailroom. its equally suitable for other work environments such as offices, hospitals and retail locations. Can be used indoors and out, so is ideal for transporting mail and other items between sites.

• • • • • •

Large-capacity baskets for secure storage Removable baskets allow easier loading / unloading Front / side non-marking buffering prevents scuffing walls, doors & furniture Turbular steel, fully-welded frame Manoeuvrable 125mm front swivel castors Rear 200mm solid rubber tyres fitted on safety-conscious stub axles

3TRGT1/2

GT1

Optional Accessories: concertina filepacks, rear pannier basket, laminate platform for larger items, trolley cover* (see page 12).

CLASSIC & GT TROLLEYS Compare spec at a glance Indoor use Outdoor use All round buffering Comfort hold handles Revolving front bumpers Load capacity (kg) Upper basket capacity (kg) Lower basket capacity (kg) Trolley size (mm) Basket size (mm) Rear pannier size (mm) Wheels Castors

SENIOR ✓

MINOR ✓

✗

✗ ✗

GT1 ✓ ✓ ✓

GT2 ✓ ✓ ✓

GT3 (see page 14) ✓ ✓ ✓

✓ ✓ ✓

✓

✗

✗ ✗

✗ ✗

✗ ✗

Construction

90 (including pannier) 40 40 855(l)x590(w)x1020(h) 635(l)x460(w)x255(h) 130(l)x460(w)x350(h) Heavy duty 200mm 125mm Powder coated welded from steel tube

40 20 20 740(l)x520(w)x1035(h) 485(l)x460(w)x255(h) n/a Heavy duty 200mm 76mm Powder coated welded from steel tube

80 (including pannier) 20 50 915(l)x610(w)x1000(h) 485(l)x460(w)x255(h) 130(l)x460(w)x350(h) Heavy duty 200mm 125mm Powder coated welded from steel tube

100 (including pannier) 30 60 1030(l)x610(w)x1000(h) 635(l)x460(w)x255(h) 130(l)x460(w)x350(h) Heavy duty 200mm 125mm Powder coated welded from steel tube

300 (platform version) 20 (long) 30 (short) 60 (long) 50 (short) 1200(l)x610(w)x1070(h) 960(l)x425(w)x255(h) (long) n/a Heavy duty 200mm 200mm Powder coated welded from steel tube

Product Code

3TRSEN

3TRMIN

3TRGT1/2

3TRGT2/2

See page 14 for different trolley configurations

9

GT TROLLEYS GT3: Big, strong and versatile trolleys The largest trolley we offer, the GT3 has a max platform load capacity of 300kg (that’s nearly 50 stone!) which should prove more than adequate for transporting mail, packages and other heavy items around larger premises.

The GT3 comes in a wide choice of configurations, including multiple basket combinations, mobile sorting units, a sturdy platform trolley complete with side and end panels.

The wheels are mounted in a diamond shape for extra manoeuvrability, or as an option they can be placed in the corners for added stability. For dimensions and full specification, see table on previous page.

• Fully-welded steel frames with bolt-on swivel castors/wheels

GT3 Platform - complete with side and end panels

o

• Diamond wheel configuration enables trolley to turn 180 in its own length • Non-marking white bufering (heat shrunk for secure fitting) protects walls, doors and furniture.

• Removable baskets accommodate concertina files • Mobile mail sorting version double as satellite sorting area with space for parcels below • Platform truck features removable sides for easy loading

3TRGT3/2

GT3 (with 2 long baskets)

3TRGT3/4

GT3 (with 4 short baskets)

3TRGT3MSU

GT3 Sort Unit (18-compt)

3TRGT3MSU/24

GT3 Sort Unit (24-compt)

3TRGT3C3

GT3 Platform Trolley

GT3 Sort Unit - suitable for mobile sorting (labels are an optional extra - see page 6

GT3 With 2 long baskets

Optional Accessories: concertina filepacks, trolley cover - see page 12

3-in-1 Handtruck: massive build-quality, ultimate versatility This new multi-purpose trolley economically performs just about every transportation task in your mailroom or warehouse. The clever 3-in-1 design lets it instantly convert from an upright sack truck to a 180o four-wheeled barrow to a highly-mobile horizontal platform truck. if there’s only room for one handtruck in your premises. it should be this!

3TRB43 3-in-1 Handtruck 10

• Rugged rectangular section steel tube frame • Comfortable loop handle • Smooth roller-bearing wheels with all-rubber tyres • Huge 250kg capacity allows transportation of very heavy items • Overall dimensions (920mmm(h) x 730mm(l) • Platform 770mm(h) x 1290mm (l) • Foot plate 470mm x 190mm; horizontal load height 265mm

SACKHOLDERS Classic Sackholders: improved handling & efficiency in the mailroom Ideal for mail sorting, handling confidential waste or recycling, top-quality Classic Sackholders are designed to accommodate Royal Mail sacks and most other standard size sacks. Ruggedly constructed in welded steel tube, all configurations are mounted on castors for easy mobility. One especially smart design feature is the location of the sack suspension hooks which are safely tucked away under the frame to avoid injury. Add custom Label Holders to aid direct sorting (factory fitted at time of purchase only; please specify when ordering).

• Holds all standard sacks, including Royal Mail • Suspension hooks safely positioned under and inside frame • Sacks easily changed independently of each other • Multiple configurations: single, double, three or four in a row Hooks tuck easily under • Heavy-duty 76mm castors for manoeuvrability frame to avoid injury • Fully welded steel frames • Durable epoxy powder-coating • All models 1045mm(h) x 400mm(d) • Widths: single 356mm, double 693mm, triple 1030mm, quad 1367mm 3TRSH1 3TRSH2 3TRSH3 3TRSH4IL 3TRSHLB

Classic Single Sackholder Classic Double Sackholder Classic Triple Sackholder Classic Quad Sackholder (in a row) Sack Label Holder (each)

LABEL HOLDER; Ideal for labelling sack holders

Stairclimbing Sack Truck: wide-bodied truck that goes upstairs STAIR Using the tried-and-trusted ‘three-star’ wheel arrangement, this extra-wide truck transports heavy loads up and down flights of stairs with minimal fuss

Unladen weight 15kg Max 120kg capacity in sack truck position High-capacity truck carries large boxes as well as sacks Simple, effective stair-climbing mechanism

Sturdy tubular steel construction

CLIMBER VERSION

or effort. The only stairclimbing truck we currently offer, it’s ideal for carrying all sorts of loads around the office or warehouse, as well as for deliveries. Max load on the flat is 120kg – on stairs however you shouldn’t attempt more than 50kg (that’s for your safety, by the way, not because the truck can’t handle it!).

Canvas & Nylon Sacks: the more you buy, the more you save These ultra-durable mail sacks are designed specially for Classic Sackholders. Both the premium-quality canvas and the more affordable nylon sacks are guaranteed to give long service.

Canvas • Circular design with reinforced base and 4 D hanging rings • Fitted with 16 brass eyelets for threading cord or a security seal • Large integral label holder for quick identification of contents • Made from hardwearing canvas • 609(w) x 896(h)mm

1MCLS1W

3TRB40 Stairclimbing Sack Truck 50kg load capacity on stairs Dimensions: 1160mm(h) x 605mm(w) x 795mm(d) Foot plate 410mm(w) x 200mm(d) Foot plate folds up for compact storage

Large foot plate for bulky items

Canvas Sacks 1–9 10 – 49 50 – 99 100+

Nylon • Flat sack design is easy to fold and store • Features 4 D-rings and rope neck • Tough nylon construction • Available in red, blue and green to colour-code contents • 609(w) x 914(h) mm

1MNS1

Stock Colours:

Canvas Sacks 1–9 10 – 49 50 – 99 100+ DK BLUE

DK GREEN

RED

11

COMPAS SORT UNITS comPas Sort Units: state-ofthe-art design for the modern mailroom comPas represents the smartest solution for sorting mail and paper management. Combining style and design with massive practicality, it’s ideal for use within a central mailroom, satellite mailsort areas, marketing departments, prestigious reception areas and open plan offices. comPas units can be mounted directly onto a bench or elevated with an open base that maximises work space, leaving room below unit for franking machines etc.

comPas features: • Ultra-stylish design and premium quality for workplaces where a smart, modern environment is important • Adjustable shelves in 25mm pitches allow configuration to user requirements • Sturdy mild steel frame construction with tough powder-coated finish – fully bolted panels and dividers • Stylish curved profile tops and back panels made from vacuum-formed plastic • Sculptured shelves have integrated labelling system

ADDITIONAL SHELVES Come complete with labels and holders Code Shelf Width 3ZUS/003 235mm 3ZUS/004 295mm

12

Specification Pack of 5 Pack of 5

OPEN BASE SORT UNITS Code Specification 3U1C/3NC Single Column Open Base Unit 3U1C/5NB Single Column Open Base Unit 3U2C/6NC 2 Column Open Base Unit 3U2C/10NB 2 Column Open Base Unit 3U1200/12/WC 4 Column Open Base Unit 3U1200/20/WB 4 Column Open Base Unit 3U1200/15/NC 5 Column Open Base Unit 3U1200/25/NB 5 Column Open Base Unit

Compartments 3 (A4 Shelves) 5 (A4 Shelves) 6 (A4 Shelves) 10 (A4 Shelves) 12 (A4+ Shelves) 20 (A4+ Shelves) 15 (A4 Shelves) 25 (A4 Shelves)

UNIT SIZE H X W X D Shelf Width Height 235mm 645mm 235mm 1005mm 235mm 645mm 235mm 1005mm 295mm 645mm 295mm 1005mm 235mm 645mm 235mm 1005mm

Width 255mm 255mm 490mm 490mm 1200mm 1200mm 1200mm 1200mm

Depth 400mm 400mm 400mm 400mm 400mm 400mm 400mm 400mm

BENCH MOUNTED UNITS Code Specification 3U900/18/WA 3 Column Bench Mounted 3U1200/24/WA 4 Column Bench Mounted 3U1200/30/NA 4 Column Bench Mounted

Compartments 18 (A4+ Shelves) 24 (A4+ Shelves) 30 (A4 Shelves)

UNIT SIZE H X W X D Shelf Width Height 295mm 1005mm 295mm 1005mm 235mm 1005mm

Width 900mm 1200mm 1200mm

Depth 400mm 400mm 400mm

FLEXI-RAIL STORAGE & POST BOXES Flexi-build in a Secure Cupboard For time when you need to keep your post under lock and key or perhaps just keep an area neat and tody by closing the cupboard doors.

• A 24 compartment Flexibuild Sort Unit within a lockable cupboard with tambour doors • Designed to compliment a reception area, office or mailroom • Available in 2 configurations: Full height Flexibuild unit or Half height unit with space for storage underneath • Includes a pull out shelf for additional work space (Half height option only) • Additional shelves can be added to create more compartments • Shelf Size 241(w) x 343(d) mm • Labels sold seperately • Overall dimensions: 1200(w) x 475(d) x 1980(h) mm 3SCSECURE1 Full height Flexibuild in a secure cupboard

comPas sort unit with Flexi-Rail

Flexi-Rail System: the infallible wall-hanging kit for sort units No floorspace for a bench on which to mount a sort unit? Then make the most of the available space in your mailroom by hanging it securely on the wall.

Compatible with both Flexibuild and comPas sort units, the Flexi-Rail system is simple to fit and allows you to move or re-arrange wall units with equal ease.

Ideal for mailrooms, satellite sorting areas or small offices – anywhere space is at a premium!

3SCSECURE2 Half height Flexibuild in a secure cupboard

3WMCOMP Wall Mount Kit for a single 3, 4 or 5 column bench mounted comPas unit (as featured above)

3SCSV4 Extra shelves - pack of 5

3WMFLEX Wall Mount Kit for a single 18 or 24 compartment Flexibuild Starter Kit

Flexi–Rail features: • Super-secure method of wall mounting, designed to free up floor space • Rails manufactured from heavy-duty anodised aluminium extrusion • Supplied in up to 2.4m lengths, predrilled with fixing holes • Modern snap-on anodised aluminium covers • End stops provide attractive cover

Custom Post Boxes: configurable to your specific requirements Here’s the affordable yet high quality way to create a secure and efficient post box system, suitable both for distributing mail internally and collecting outgoing post.

Each separate compartment locks with its own key, enabling individual recipients to check and pick up their mail. Offered in columns of six boxes, the system can be easily and progressively expanded to meet changing needs.

3CBOX1 Custom Post Box (single column of six) 3CBOX2 (double column of six,total 12 boxes) 3CBOX3 (triple column of six, total 18 boxes)

• Made from sheet steel with hardwearing powdercoated finish • Each box lockable and supplied with 2 keys • Boxes feature a clear perspex label holder for easy identification • Configurable in any format • Boxes fix to wall plate which screws to wall • Available with weatherproof cladding for sheltered outdoor locations • Individual boxes – 280(w) x 385(d) mm • Standard compartment height 110mm (with option of 220mm or 330mm to accommodate larger

13

PACKING & SORTING Label Dispenser: instant access to Royal Mail labels

Packing Bench: custom bench for ‘double-wrapping’

Designed for busy mailrooms where speed is of the essence, this simple dispenser is custom-designed to store up to 4 different rolls of Royal Mail Service labels. The full range of labels are always close at hand when needed, tidily organised and ready to dispense.

• Keeps labels neat, tidy and ready for use • Design prevents rolls unravelling • Manufactured from sturdy formed acrylic sheet • 355 (w) x 240 (d) x 200 (h) mm

Ideal for any mailroom area where packages are prepared for despatch, this unique packing bench integrates dual dispensers for rolls of wrapping paper and bubble-wrap/padding.

For extra convenience and speed, the dispensers feature a rotary cutting mechanism that allows both materials to be cut simultaneously.

• Bench features optimum 900mm working height, ideal for standing usage • Dispensers hold two rolls for padding and wrapping

3BLD Label Dispenser

• Rotary cutter for cutting different materials simultaneously • Can hold up to 1250mm wide paper/bubble wrap rolls 3BEP1L Packing Bench (including accessory rack/shelf) 1800(w) x 900(d) x 900(h) mm

Lockable Sort Box:

BEST SELLER

The secure way to archive or transport mail and documents. Filled, these boxes can be securely stacked up to 8 high. Empty they can be nested to save up to 75% of their combined volume. Available in two large-capacity colours, with security sealable lids, they are ideal for segregation of different courier routes etc. The dolly trolley is excellent for moving the lockable sort boxes around with ease. Ideal for hospitals, surgeries, school runs, offices and mailrooms.

AutoLevel Trolley: self-levelling for less bending and easier lifting However much these ingenious trolleys contains, you unload them from the top at a comfortable working height approximately waist height. A unique self-levelling mechanism brings items at the bottom easily into reach, removing the need to bend and reducing the risk of back injury.

• Heavy duty 100kg load capacity • Durable nylon-reinforced PVC concertina-style bag • Mild steel, powder-coated tubular frame • Robust 150mm castors ball bearings and nonmarking polyurethane tyres

• 600(w) x 400(d) x 320(h) mm internal 508(w) x 335(d) x 285(h) mm (54 litre)

• External 930(l) x 720(w) x 940(h) mm

• 710(w) x 460(d) x 368(h)mm. Internal 597(w) x 374(d) x 330(h) mm (80 litre)

• Internal: 830(l) x 620(w) x 305(h) mm unloaded / 680(h) mm loaded

• 604(w) x 402(d) x 162(h) mm / Weight 4kg / Load 250kg (Dolly Trolley)

• Volume: empty, 157 litres; loaded, 350 litres

• Unladen weight 54 litre - 3.20kg • Unladen weight 80 litre = 4.30kg 3LSB54 3LSB80 3LSBDOL

14

54 Litre Lockable Sort Box (Available in red, yellow, blue, green)

• Reduced width of over 110mm on standard AutoLevel trolley • External: 920(l) x 610(w) x 900(h) mm • Internal: 830(l) x 520(w) x 305(h) mm unloaded and 680(h) mm loaded • Volume: empty, 132 litres; loaded 294 litres

80 Litre Lockable Sort Box (Available in red, blue, green)

3TRLLC

AutoLevel Trolley

Dolly Trolley Frame (Colour red)

3TELLCSLIM

Slim-lin trolley Leveller Trolley

MODULAR RACKING

Modular Racking: optimum storage for reprographic & stationary areas Constructed throughout from zinc chromate coated steel, this modular racking system not only looks good - it’s also incredibly strong, easy to assemble and can be configured to suit your needs and the available storage space. Adjust the height of the shelves. attach whole bays together in straight rows L-shapes or islands.

Create your own custom modular storage solution. And all without tools!

• Top-quality storage system for offices, mailrooms, reprographic/print rooms, hospitals, schools etc • Upright posts form a strong frame that stays rigid even in single bays • All zinc chromate coated steel construction with safe smooth-edge design • Framed heavy-gauge wire shelving allows good air flow • No tools required for assembly - fitments simply slot into place

• Rapid self-assembly allows storage areas to be created or adapted at will • Units can be easily extended by adding additional bays • Shelf height adjustable in 50mm increments to allow storage of different sized items • 4 tier shelving with two shelf depth options of 450 and 600mm • Units offered in 3 widths: 900, 1200 and 1500mm • Each kit comprises 4 shelves and 4 posts 1700mm high

4 Tier Shelving with 450mm depth shelves 3QZ309 4 x 900mm wide shelves 3QZ312 4 x 1200mm wide shelves 3QZ315 4 x 1500mm wide shelves 4 Tier Shelving with 600mm depth shelves 3QZ5094 4 x 900mm wide shelves 3QZ5124 4 x 1200mm wide shelves 3QZ5154 4 x 1500mm wide shelves Starter kits offered here can be customised to meet special requirements.

15

Represented by: