Ivoclar Laboratory Solutions
November 2026 - January 2027
Small. But mighty.
PrograMill® Dry The masterpiece in milling excellence
IvoBase® Injection System. A smart device.
New PrograMill® Dry. Simply digital. Smart by design.
New Renfert Basic prebonder XS
Page 2
Pages 6 - 7
Page 9
New
Making People Smile
New
Prosthetics
IvoBase Injector A smart device. ®
50% Off!
The IvoBase Injector makes prosthetics fun. Fully automated, dependable, without any steam. Moreover, it ensures an outstanding occlusal fit to which every dental technician aspires.
Plug and play
Special Offer: Get 50% Off IvoBase® Injector when you spend $5,000ex GST on any Ivoclar teeth!* IvoBase Injector 628518EA - 100-240V/50-60Hz *Can be combined with teeth discounts. The $5,000ex GST qualifying spend is calculated after discounts have been applied. Limit of 1 IvoBase Injector per order.
Find out more https://bit.ly/ivobase-system-nz
Terms & Conditions apply - see back page.
2
Phone 0508 486 252 or order online www.ivoclar.com
Digital Dentures
Material properties that define long-term denture performance Learn which material properties determine the longevity of dentures – from fracture resistance to water absorption.
Fracture toughness Fracture toughness is a measure of the ability of a material to resist the growth of existing cracks under stress without breaking. Imagine a small crack already present in a denture base. How well the denture material can prevent this crack from spreading further is its fracture toughness. In the oral environment, denture plastics are subjected to repeated and varied stresses. Under these conditions, a material with low fracture toughness allows a small crack to propagate quickly, often resulting in a sudden and complete fracture. A material with high fracture toughness, on the other hand, behaves differently. Even if a microcrack is present, the material can absorb and redistribute stress around the defect. This drastically lowers the likelihood of fractures.
Flexural strength Flexural strength, also known as bending strength, indicates how much bending stress a material can withstand before it breaks. During chewing, dentures are subjected to bending forces. If the dental plastic is too brittle, it will snap immediately. If it’s too flexible, it will bend too much and deform. Deformation of a denture base can make a denture lose its suction or border seal and become loose and uncomfortable.
Flexural modulus How much a material bends or deforms before it reaches its breaking point is known as flexural modulus. In simpler terms, it measures the rigidity or stiffness of a material. A material with high flexural modulus resists deformation and maintains its original shape under pressure. An equilibrium between stiffness and strength is what guarantees long-term durability, patient comfort, and predictable laboratory outcomes.
Residual monomer (MMA) The residual MMA acts as a ‘plasticiser’ by reducing the forces between the polymer chains and thus weakening the internal structure of the material. This could reduce the flexural strength, hardness, and stiffness of the denture, making it more likely to warp or break under heavy chewing loads. Excessive residual monomer can leave behind microscopic voids. These microscopic voids in the denture can increase the water solubility and water absorption of the denture, which can reduce its dimensional stability over time.
The polymer chains in the denture also have polar spots which can interact with the polar water molecules. These interactions attract water molecules into the microscopic spaces between the polymer chains, a process known as sorption.
Water solubility High water solubility decreases the durability of the denture and may also trigger soft tissue reactions (by allowing monomer to leach out). When substances dissolve out, they leave behind microscopic voids, making the denture structurally weaker over time. A soluble denture thus becomes brittle and more prone to snapping.Solubility must therefore be kept as low as possible to prevent the denture from weakening, losing its shape or appearance, and to maintain good biocompatibility.
Abrasion resistance, plaque accumulation and discolouration Abrasion resistance describes how well a denture material is able to withstand wear caused by brushing, contact with opposing teeth and chewing forces. When a material has low abrasion resistance, denture surfaces scratch easily, developing microscopic grooves that promote bacteria and plaque accumulation, and make the denture more susceptible to stains, discolouration, oral odours, and infections. Surface characteristics play an important role in this process. Plaque tends to accumulate quicker and more easily when surface roughness of the denture exceeds 0.2μm, when porosities are present, or when aggressive cleaning methods damage the surface.
The takeaway Material properties help us understand how a denture is likely to perform over time in the challenging conditions of the oral environment. Because these material properties are so closely interconnected, the aim is not to maximise a single value but to achieve a balanced material profile that meets ISO requirements and performs reliably in everyday use.
Read the full article https://bit.ly/4yLNuYY
Water absorption
New Ivotion® Base & Ivotion® Dent Multi Shades Available!
Denture bases are made of a polymer (PMMA). On a molecular level, it has tiny gaps between its long chain-like molecules. Water molecules are polar, meaning they have an uneven distribution of charge within the moelcule. Terms & Conditions apply - see back page.
Phone 0508 486 252 or order online www.ivoclar.com
3
Zirconia
New dimensions. Redefining possibilities. From ultra-thin veneers to full-arch restorations, one disc supports your everyday cases, reducing the need to stock multiple zirconia materials. Available in 7 sizes from 12mm to 30mm.
IPS e.max® Zirconia IPS e.max® Ceram Art
Get 25% Off
IPS e.max Ceram Art & IPS e.max Zirconia when purchased together!
– One disc covering the full application spectrum from thin veneers to full-arch restorations – Advanced GTx Technology takes aesthetics to a new level – Universal range of stain, glaze and structure pastes for the individualised design of ceramic restorations
Characterise with confidence. Achieve natural aesthetics through efficient characterisation with IPS e.max® Ceram Art: Reduce characterisation time by up to 50%* with the one-shot technique Universal stain, glaze and structure pastes simplify efficient characterisation Designed to complement IPS e.max® Zirconia for seamless aesthetics
“It’s amazing to work with one disc that covers all indications. The compatibility with IPS e.max Ceram Art giving us real peace of mind.” Aiham Farah, DT, USA
*Compared to previous zirconium oxide generations
4
Terms & Conditions apply - see back page.
Phone 0508 486 252 or order online www.ivoclar.com
Furnaces
More restorations. Same workday. IPS e.max® Zirconia helps laboratories increase throughput with ultra-fast sintering protocols that deliver aesthetic, accurately fitting restorations in significantly less time.
Increased throughput without compromising aesthetics
Increased productivity
Speed sintering in as little as 58 minutes for smaller restorations 2 hours 57 minutes for larger cases, including full-arch restorations
Accuracy of fit
Consistent fit helps reduce adjustments and remakes Minimised distortion during sintering Optimised sintering kinetics
Special Offer: Get 30% off the Programat® S2 Sintering Furnace and IPS e.max® Zirconia Discs when purchased together!
Dosto tray shown is for standard firing programs only and is not recommended for use with speed programs. *Compared to previous zirconium oxide generations
Terms & Conditions apply - see back page.
Phone 0508 486 252 or order online www.ivoclar.com
5
Milling
Simply digital. Smart by design. PrograMill Dry makes it easy and cost-effective to get started with digital milling, while delivering reliable, precise results.
NEW
Its smart features, powered by the latest version of PrograMill CAM software, support efficient workflows and intuitive operation. 5-axis system
Ask about our Launch Special! Includes: PrograMill Dry Full System with Base, CAM, PC & Renfert PowerCAM EC Suction Unit!
Ionizer
PrograMill® Dry Base Smart storage. Clean integration. Like all Ivoclar milling machines, PrograMill® Dry is available with a dedicated base unit. PrograMill® Dry Base features a low-noise suction unit, as well as an integrated drawer with a specially designed insert to keep materials, tools and accessories neatly organised and within easy reach.
Terms & Conditions apply - see back page.
6
Phone 0508 486 252 or order online www.ivoclar.com
Milling 9,2-inch touchscreen with step-by-step guidance RFID-based material management with programmable tags
Advanced jet stream extraction system
Zero point clamping system for high-accuracy milling
Milling chamber with a smart, user-friendly design and an extra-large door
GO TO IVOCLAR 3D-SHOWROOM! https://bit.ly/iv-programill-dry-3Dshowroom-nz
Terms & Conditions apply - see back page.
Phone 0508 486 252 or order online www.ivoclar.com
7
Precious Alloys & Veneering
Cendres+ Métaux Cendres+Métaux is recognised for its expertise in the manufacturing and distribution of dental alloys, with a strong focus on biocompatibility, durability, and clinical performance. Their precious metal alloys are trusted worldwide for crowns, bridges, ceramic veneering, and removable prosthetics, due to their outstanding mechanical properties and long-lasting results.
Alloys
Composition
Code
Description
Au %
Pt %
Ag %
Cu %
771530
Pontor MPF 01000293 10g
72
3.6
Pd %
13.7
9.78
771531
Pontor MPF 01000294 25g
72
3.6
13.7
9.78
771534
Esteticor Avenir 01000246 10g
84
10.9
2.4
0.2
771535
Esteticor Avenir 01000247 25g
84
10.9
2.4
0.2
771532
V-Gnathos Plus 01000223 10g
85.9
11.7
771533
V-Gnathos Plus 01000224 25g
85.9
11.7
771560
Esteticor Cosmor H 01000235 10g
84
10.9
2.4
0.2
771561
Esteticor Cosmor H 01000236 25g
771586
Esteticor Implant 76 01000259 10g
76.8
1.35
18.6
771587
Esteticor Implant 76 01000260 25g
771558
Esteticor Blancor 01000208 10g
771559
Esteticor Blancor 01000209 25g
771536 771557
Special Offer: Spend $1,000ex GST* on C+M Dental Alloys, Get $100.00ex GST* worth of Ivoclar Laboratory Materials FREE of charge! *At normal price. Free product Ivoclar brand only. Free materials exclude alloys. Not in conjunction with any other offers.
1
57.29
29
Cerapall 6 01000188 10g
6.1
75
6.4
Cerapall 6 01000189 25g
6.1
75
6.4
771562
Esteticor N2 01000184 10g
15.2
0.2
52
20
771563
Esteticor N2 01000185 25g
15.2
0.2
52
20
771564
Ceradelta 2 01000170 10g
61.45
24.45
771565
Ceradelta 2 01000171 25g
771566
Esteticor Implant 58 01000228 10g
58.5
28.85
8
771567
Esteticor Implant 58 01000229 25g
771568
V-Deltaloy 01000200 10g
54.2
31.04
4.83
771569
V-Deltaloy 01000201 25g
771570
V-Classic 01000220 10g
75
19
1
0.44
771571
V-Classic 01000221 25g
75
19
1
0.44
771572
Pagalin 2 01000278 10g
3
23
65
6.45
771573
Pagalin 2 01000279 25g
3
23
65
6.45
771574
Esteticor Plus 01000179 10g
45
38.9
5
0.4
771575
Esteticor Plus 01000180 25g
45
38.9
5
0.4
771576
Aurofluid 2 PF 01000317 10g
78.05
0.99
11.5
8.5
771577
Aurofluid 2 PF 01000318 25g
78.05
0.99
11.5
8.5
771578
V-Delta SF 01000203 10g
51.5
771579
V-Delta SF 01000204 25g
51.5
771580
Dentalor 60 01000302 10g
60
0.45
3
22.5
12.5
771581
Dentalor 60 01000303 25g
60
0.45
3
22.5
12.5
771582
Medior 3 01000298 10g
55
5.95
26
10.9
771583
Medior 3 01000299 25g
55
5.95
26
10.9
771584
Yellow Special 01000290 10g
41
0.45
1.7
44.9
11
771585
Yellow Special 01000291 25g
41
0.45
1.7
44.9
11
771588
Pallorag 33 01000306 10g
10
20
59.5
9.5
711589
Pallorag 33 01000307 25g
10
20
59.5
9.5
38.4 38.4
Shop online today! https://bit.ly/iv-cendres-metaux-webshop-nz
Explore the full range Discover more about Cendres+ Métaux’s dental alloys and find the perfect solution for your laboratory.
Download the catalogue https://bit.ly/iv-cendres-metaux
Terms & Conditions apply - see back page.
8
Phone 0508 486 252 or order online www.ivoclar.com
Equipment
New Basic prebonder XS Fine sandblasting unit for surface conditioning prior to adhesive cementation Renfert standardises surface conditioning prior to adhesive cementation in dental offices with the Basic prebonder system. Scientifically defined sandblasting parameters and coordinated system components transform a procedure that was previously highly dependent on the user into a defined clinical process. Specially designed for clinical use, the Basic prebonder XS creates clearly defined conditions for surface treatment of zirconia, metal alloys, hybrid materials, and modern polymers prior to bonding.
Advantages − Processing reliability in adhesive bonding thanks to standardised sandblasting of zirconium oxide, metal alloys, hybrid materials, and modern polymers − Reliable results thanks to scientifically defined sandblasting parameters and coordinated system components − Better control over a sensitive procedure by means of reproducible sandblasting conditions
Details − Compact design for flexible use in dental offices with limited space − The integrated Basic prebonder control tip (spacer) ensures uniform energy input − Uniform surface activation is achieved through the specially developed Basic prebonder jet nozzle with homogeneous sandblasting jet − A precision pressure gauge with a marked operating range ensures easy handling The Art of Control – Basic prebonder: More than sandblasting. Pre-bonding.
Introductory Offer: Get 10% Off Basic prebonder XS! 774419 - Basic prebonder XS, 29695000
Technical data Fine sandblasting for bonding 50um
Application Working pressure
Fine sandblasting for bonding 0,6-1 bar//8.7-14.5 psi | Recommended setting 0,8 bar/11.6 psi
Max. connection pressure
Scope of delivery
Flow rate (at 1 bar)
Basic prebonder XS with Basic prebonder tank (for 50 µm Prebonder surface pro abrasive only), incl. 1x special nozzle Basic prebonder jet nozzle, 1x spacer pin / focusing aid (Basic prebonder control tip), 1x Ergo handle, 1x flex hose and 2-bar pressure regulator, 500g Prebonder surface pro, 4x spare Basic prebonder control tips, 1 test surface for monitoring the sandblasting parameters Basic prebonder control pad, 1x handpiece holder, 1x pneumatic foot switch, 1x pneumatic connection set (EU/USA), and 1x dispensing nipple tool.
Number of tanks Immediate stop function Dimensions(WxHxD) Tank capacity Weight (empty)
6-8 bar//87-116 psi 8-9 l/min//0.28-0.32 cfm 1 No 123mm x 202mm x 255mm 300ml/500g abrasive 1.5kg
Terms & Conditions apply - see back page.
Phone 0508 486 252 or order online www.ivoclar.com
9
Alginate
ChromaX Alginate & Motion Alginate Mixer Motion Alginate Mixer Produces perfectly mixed alginate − Dual-stage start function reduces gear wear and prolongs the lifespan − Multiple memory settings allow users to set different mixing durations − Long-lasting, enhanced motor delivers high-speed torsion and ensures fine mixing − Capable of reaching a maximum of 3,600rpm in just 1.08 seconds − PC-made casing, which is lighter and more resistant to impact − Streamlined and compactly designed 716588 - Motion Alginate Mixer MX-150
ChromaX Alginate High precision alginate for impressions with chromatic phase indicator. − Chromatic indication of the working phases for easy and precise results, regardless of water temperature and hardness − The excellent dimensional stability allows casting of the impressions after 5 days − Stabilised hypoallergenic formula − Snap setting for fast working and patient comfort − Lead and cadmium free − Dust free powder for safe working and cleaning ease − Excellent biocompatibility and gypsum compatibility − Fast wetting time to obtain smooth and plastic consistency for easy mixing − Very high compressive strength and recovery from deformation, exceeding ISO requirements − 6 year shelf life 716137 - Chromax Alginate 450g
Get a FREE Motion Alginate Mixer when you purchase 70x bags of ChromaX Alginate! Buy 70x bags of ChromaX Alginate
Get a FREE Motion Alginate Mixer!
Shop online today https://bit.ly/iv-shop-chromax
Shop online today https://bit.ly/iv-shop-motion-alg
Terms & Conditions apply - see back page.
10
Phone 0508 486 252 or order online www.ivoclar.com
FREE Mixer!
Equipment
The perfect combination: Your talent, W&H Perfecta
300, 600 & 900 Achieve outstanding results with the W&H Perfecta range, designed for effortless operation, exceptional reliability, and precision performance. Featuring intuitive controls, integrated air-jet functionality, and powerful handpiece options for processing ceramics and other materials, Perfecta allows you to work efficiently and comfortably.
Get 15% Off the Perfecta Range!
Whether you choose the 300, 600, or 900, you’ll enjoy the renowned W&H quality and the flexibility to process a wide range of materials with confidence, all from a single, easy-to-use system.
Call 0508 486 252 to place your order today! Terms & Conditions apply - see back page.
Phone 0508 486 252 or order online www.ivoclar.com
11
Exciting learning opportunities are just around the corner! Discover our upcoming courses happening over the next few months – simply scan the QR code below to explore what’s next.
Explore upcoming learning opportunities https://bit.ly/iv-nz-upcoming-courses
IDS 2027 Cologne IDS 2027 is the platform for the industry where tomorrow’s concepts and solutions for digital dental practice become tangible. Join us in Cologne from 16–20 March 2027 and explore the technologies, trends and ideas shaping the future of dentistry.
Find out more https://bit.ly/iv-ids-cologne
Let’s stay in touch Find out about our new products, special offers and learning opportunities by following us on social media!
Follow us on Instagram!
@ivoclar.nz
https://bit.ly/iv-nz-instagram
Follow us on LinkedIn! https://bit.ly/iv-linkedin-pacific
Follow us on Facebook! https://bit.ly/iv-facebook-nz
Products are not available for purchase by the general public. Always follow the directions for use. Valid 1 November 2026 - 31 January 2027. All prices EXCLUDE GST, freight and installation, and may change without notice. Descriptions and data constitute no warranty of attributes. All discounts are off normal price unless stated otherwise and exclude GST. Free items of equal or lesser value. Not in conjunction with any other offers/discounts. Offers not applicable to government, corporate or overseas accounts. Offers are correct at the time of printing. Ivoclar Vivadent Ltd reserves the right to alter, or remove, any promotion or offer. All offers while stocks last. Images are indicative only. E & OE. Note: some specials may not be available on Webshop, please enter deals in comments box on checkout to secure offer.
ivoclar.com orders.nz@ivoclar.com 0508 486 252