iTec - SENTRALGASSUTSTYR SpectroLab

SENTRALGASSUTSTYR SPECTROLAB VERSJON 2.0. 2019

www.itec.as

1 | iTec AS

FORORD

iTec AS leverer komplette maskinløsninger for plater, rør og profiler, samt gassutstyr, og har de siste 20 år vært en ledende leverandør til norsk industri. iTec leverer gassutstyr fra den tyske høykvalitetsleverandøren Spectron. I samarbeid med leverandør kan vi levere gassutstyr til ulike industrier; medisinsk, farmasøytisk, prosess, akvakultur og næringsmiddel applikasjoner.

Spectron har en bred produktportefølje som inneholder komponenter for alle typer komprimerte gasser og bruksområder.

Denne katalogen inneholder teknisk spesifikasjon på gassutstyr i forkrommet utførelse (SpectroLab).

Generell informasjon: Inngangstrykk Utgangstrykk Max volumstrøm gass Lekkasjerate

: fra 0 - 300 bar : fra 0 - 200 bar : 50 m3/t : 1x10-8 mbar l/s

Alle produktene tilfredsstiller de normer og lovpålagte krav som gjelder for gass og trykkpåkjent utstyr. iTec leverer komplette gass distribusjonsløsninger, med tilhørende prosjektering/ dimensjonering og dokumenterer jobben i henhold til kundens krav.

Det tas forbehold om endringer på produktenes visuelle utforming vist i denne katalogen.

Ta kontakt med iTec for nærmere informasjon om prosjektering/ dimensjonering, priser, normer og lovpålagte krav, installasjon, service og preventivt vedlikehold av dine gassystemer.

Med vennlig hilsen

Daniel R. Persen Salgssjef Gassutstyr

2 | iTec AS

INNHOLD

FORORD........................................................................................................................................................02 LINJEREGULATOR (LINE PRESSURE REGULATORS).............................................................................04

LM51-2.............................................................................................................................................04

LM51-4.............................................................................................................................................06

LM51-6.............................................................................................................................................08

LM52exact-2.................................................................................................................................... 10

LM52exact-4.................................................................................................................................... 12

LM52exact-6.................................................................................................................................... 14

LM53-2.............................................................................................................................................16

LM53-6.............................................................................................................................................18

LM61/LM62......................................................................................................................................20

LM71................................................................................................................................................22 FLASKEREGULATOR (CYLINDER PRESSURE REGULATORS).............................................................. 25

FM45................................................................................................................................................25

FM51................................................................................................................................................27

FM52exact....................................................................................................................................... 29

FM53................................................................................................................................................31

FM61/ FM62.....................................................................................................................................33 PANELREGULATOR (PANEL PRESSURE REGULATORS)....................................................................... 36

PM51-2............................................................................................................................................ 36

PM51-4............................................................................................................................................ 38

PM51-6............................................................................................................................................ 40

PM52exact-2................................................................................................................................... 42

PM52exact-4....................................................................................................................................44

PM52exact-6....................................................................................................................................46

PM53-2............................................................................................................................................ 48

PM53-6............................................................................................................................................ 50 GASSENTRAL (PRESSURE CONTROL PANELS)..................................................................................... 53

BM55-1............................................................................................................................................ 53

BM55-2............................................................................................................................................ 55

BM56-1............................................................................................................................................ 57

BM56-2............................................................................................................................................ 59

BM55-2U..........................................................................................................................................61

BM56-2U..........................................................................................................................................63

BM55-2A..........................................................................................................................................65

BM50-1+2........................................................................................................................................ 66

BM55+56-E......................................................................................................................................67

BM65-1............................................................................................................................................ 69

BM66-1............................................................................................................................................ 71

BM65-2............................................................................................................................................ 73

BM65-2U..........................................................................................................................................75

BM65-2L..........................................................................................................................................

77

BM65-E............................................................................................................................................79

BM65-AC......................................................................................................................................... 81

BM65-2A-AC....................................................................................................................................83 VENTILER (VALVES).................................................................................................................................... 86

MV3-M............................................................................................................................................. 86 DVM.................................................................................................................................................88

V6M-3............................................................................................................................................ 90 UTTAKSPOST (TAPPING POINTS)........................................................................................................... 92

EM55............................................................................................................................................. 92

EM65............................................................................................................................................. 94

EM15/EE15................................................................................................................................... 96

EM55 (Spectrolab plus)................................................................................................................. 109

EM65-AC....................................................................................................................................... 119 TILBEHØR (ACCESSORIES)..................................................................................................................... 120

Flowmeter FLM 32......................................................................................................................... 120

Pigtails og Braketter........................................................................................................................ 122

Høytrykksslanger HDS.................................................................................................................... 124

Adr.: Hegdalveien 80, N-3261Larvik | Tlf.: 95 800 700 | e-mail: itec@itec.as | Web: www.itec.as

| 3

LINJEREGULATOR LM51-2

Line pressure regulator LM51-2

spectro lab

Specifications • SPECTROLAB-components guarantee maximum quality by using high grade materials and a quality assurance program acc. to ISO 9001.

• All parts in the gas wetted surface area are cleaned in an ultrasonic cleaning system (CFCfree) with the special Cleaning process ® SPECTRO-CLEAN and then baked out.

• SPECTROLAB-components undergo a 100% function- and Helium-leak-test.

Line pressure regulator LM51-2

Product features • Brass (chrome plated) line pressure regulator • For non-corrosive gases and gas mixtures up to quality 6.0 • 2 ports for flexible and individual configuration • Very stable outlet pressure • Suitable for inlet pressures up to 300 bar • Max. outlet pressures 1,5 up to 200 bar * • Metal-to-metal seal to atmosphere • Suitable for ECD-applications • Pressure regulator can be evacuated • Inlet filter • Approved for use with oxygen • Simple outlet pressure limitation by handwheel • Easy to install • New laboratory-style design • Ergonomically designed

Technical data Type Inlet pressure P1 Outlet pressure P2

single-stage max. 300 bar 1,5 / 4 bar (P1 ≤ 50 bar) 10 / 20 / 50 / 100 / 200 bar (P1 > 50 bar)

Materials Body regulator: Valve seat: Diaphragm: Filter: In- and outlets Temperature range Leak rate (to atmosphere) (via seat) Flow capacitiy Weight

chrome plated brass PA Hastelloy C276 Sintered SS 316L 1/4” NPT-F -30oC to +60oC 1x10-8 mbar I/s He 1x10-6 mbar I/s He CV=0.15 1.0 kg

* 1,5 / 4 bar only for inlet pressure ≤ 50 bar

Dimensions LM51-2

Side view

ca. 119 23,5

Ø 50

50

Data sheet DES LM51-2 Edition 1115 Subject to alteration without prior notice © Spectron Gas Control Systems GmbH

4 | iTec AS

Spectron Gas Control Systems GmbH Fritz-Klatte-Str. 8, D-65933 Frankfurt Tel.: +49 (0)69 38016-0, Fax: +49 (0)69 38016-200 info@spectron.de www.spectron.de

LINJEREGULATOR LM51-2

Line pressure regulator LM51-2

spectro lab

Ordering information: Line pressure regulator LM51-2

In- / outlets CM CM CE CE 0

1/4 - 1/8” / 1/4” / 1/2” - OD compression fitting (brass) 6 - 3 / 6 / 8 / 10 / 12 mm compression fitting (brass) 1/4 - 1/8” / 1/4” / 1/2” - OD compression fitting (stainless steel) 6 - 3 / 6 / 8 / 10 / 12 mm compression fitting (stainless steel) - 1/4”-NPT-F (port only)

P2

P1

2

1

port selection

LM51 - 2 - 300 - 10 - 1 - 2 - N2 Outlet pressure P2

Inlet pressure P1 10 - max. 10 bar 20 - max. 20 bar 50 - max. 50 bar

100 - max. 100 bar 200 - max. 200 bar 300 - max. 300 bar

1,5 - to 1,5 bar (P1 ≤ 50 bar) 4 - to 4 bar (P1 ≤ 50 bar) 10 - to 10 bar 20 - to 20 bar 50 - to 50 bar 100 - to 100 bar 200 - to 200 bar

Type of gas Please specify type of gas (for selection of valve seat materials)

Ordering example: LM51-2-300-10-CE6-CE6-N2

1

2

Spectron Gas Control Systems GmbH Data sheet DES LM51-2 Edition 1115 Fritz-Klatte-Str. 8, D-65933 Frankfurt Subject to alteration without prior notice Tel.: +49 (0)69 +49 (0)69 38016-200 © Spectron Gas Control Systems GmbH Adr.: Hegdalveien 80, N-3261Larvik | Tlf.: 9538016-0, 800 700Fax: | e-mail: itec@itec.as | Web: www.itec.as info@spectron.de www.spectron.de

| 5

LINJEREGULATOR LM51-4

Line pressure regulator LM51-4

Specifications • SPECTROLAB-components guarantee maximum quality by using high grade materials and a quality assurance program acc. to ISO 9001.

• All parts in the gas wetted surface area are cleaned in an ultrasonic cleaning system (CFCfree) with the special Cleaning process ® SPECTRO-CLEAN and then baked out.

• SPECTROLAB-components undergo a 100% function- and Helium-leak-test.

Line regulator LM51-4

Product features • Brass (chrome plated) line pressure regulator • For non-corrosive gases and gas mixtures up to quality 6.0 • 4 ports for flexible and individual configuration • Very stable outlet pressure • Suitable for inlet pressures up to 300 bar • Max. outlet pressures 1,5 up to 200 bar * • Metal-to-metal seal to atmosphere • Suitable for ECD-applications • Pressure regulator can be evacuated • Inlet filter • Approved for use with oxygen • Simple outlet pressure limitation by handwheel • Easy to install • New laboratory-style design • Ergonomically designed

* 1,5 / 4 bar only for inlet pressure ≤ 50 bar

Dimensions LM51-4

spectro lab

Technical data Type Inlet pressure P1 Outlet pressure P2

single-stage max. 300 bar 1,5 / 4 bar (P1 ≤ 50 bar) 10 / 20 / 50 / 100 / 200 bar (P1 > 50 bar)

Materials Body regulator, relief valve: chrome plated brass Valve seat: PA Diaphragm: Hastelloy C276 Filter: Sintered SS 316L 1/4” NPT-F In- and outlets -30oC to +60oC Temperature range Leak rate (to atmosphere) 1x10-8 mbar I/s He (via seat) 1x10-6 mbar I/s He Safety pressure gauges Pressure gauge ISO5171/Kl1.6/NG50 CV=0.15 Flow capacitiy 1.0 kg Weight

Side view

ca. 119 50

Ø 50

112

23,5

Data sheet DES LM51-4 Edition 1115 Subject to alteration without prior notice © Spectron Gas Control Systems GmbH

6 | iTec AS

Spectron Gas Control Systems GmbH Fritz-Klatte-Str. 8, D-65933 Frankfurt Tel.: +49 (0)69 38016-0, Fax: +49 (0)69 38016-200 info@spectron.de www.spectron.de

LINJEREGULATOR LM51-4

Line pressure regulator LM51-4 Ordering information: Line regulator LM51-4

spectro lab

In- / outlets CM CM CE CE B A K M 0

2

1/4 - 1/8” / 1/4” / 1/2” - OD compression fitting (brass) 6 - 3 / 6 / 8 / 10 / 12 mm compression fitting (brass) 1/4 - 1/8” / 1/4” / 1/2” - OD compression fitting (stainless steel) 6 - 3 / 6 / 8 / 10 / 12 mm compression fitting (stainless steel) - plug - relief valve - 1/4”-18 NPT-F (P2≤100 bar) - contact gauge - pressure gauge - 1/4”-NPT-F (port only)

P2

P1

1

3 port selection 4

LM51 - 4 - 300 - 10 - 1 - 2 - 3 - 4 - N2

Outlet pressure P2

Inlet pressure P1 10 - max. 10 bar 20 - max. 20 bar 50 - max. 50 bar

100 - max. 100 bar 200 - max. 200 bar 300 - max. 300 bar

1,5 - to 1,5 bar (P1 ≤ 50 bar) 4 - to 4 bar (P1 ≤ 50 bar) 10 - to 10 bar 20 - to 20 bar 50 - to 50 bar 100 - to 100 bar 200 - to 200 bar

Type of gas Please specify type of gas (for selection of valve seat materials)

Ordering example: LM51-4-300-10-CE6-M-CE6-B-N2

2

1

3

4 Spectron Gas Control Systems GmbH Data sheet DES LM51-4 Edition 1115 Fritz-Klatte-Str. 8, D-65933 Frankfurt Subject to alteration without prior notice Tel.: +49 (0)69 +49 (0)69 38016-200 © Spectron Gas Control Systems GmbH Adr.: Hegdalveien 80, N-3261Larvik | Tlf.: 9538016-0, 800 700 Fax: | e-mail: itec@itec.as | Web: www.itec.as info@spectron.de www.spectron.de

| 7

LINJEREGULATOR LM51-6

Line pressure regulator LM51-6

spectro lab

Specifications • SPECTROLAB-components guarantee maximum quality by using high grade materials and a quality assurance program acc. to ISO 9001.

• All parts in the gas wetted surface area are cleaned in an ultrasonic cleaning system (CFCfree) with the special Cleaning process ® SPECTRO-CLEAN and then baked out.

• SPECTROLAB-components undergo a 100% function- and Helium-leak-test.

Line regulator LM51-6

Product features • Brass (chrome plated) line pressure regulator • For non-corrosive gases and gas mixtures up to quality 6.0 • 6 ports for flexible and individual configuration • Extremly stable outlet pressure • Suitable for inlet pressures up to 300 bar • Max. outlet pressures 1,5 up to 200 bar * • Metal-to-metal seal to atmosphere • Suitable for ECD-applications • Pressure regulator can be evacuated • Inlet filter • Approved for use with oxygen • Simple outlet pressure limitation by handwheel • Easy to install • New laboratory-style design • Ergonomically designed

single-stage max. 300 bar 1,5 / 4 bar (P1 ≤ 50 bar) 10 / 20 / 50 / 100 / 200 bar (P1 > 50 bar)

Materials Body regulator, relief valve: Valve seat: Diaphragm: Filter: In- and outlets Temperature range Leak rate (to atmosphere) (via seat) Pressure gauge Flow capacitiy Weight

* 1,5 / 4 bar only for inlet pressure ≤ 50 bar

Dimensions LM51-6

Technical data Type Inlet pressure P1 Outlet pressure P2

chrome plated brass PA Hastelloy C276 Sintered SS 316L 1/4” NPT-F -30oC to +60oC 1x10-8 mbar I/s He 1x10-6 mbar I/s He Safety pressure gauges ISO5171/Kl1.6/NG50 CV=0.15 1.1 kg

Side view

ca. 119 110

Ø 50

104

23,5

Data sheet DES LM51-6 Edition 1115 Subject to alteration without prior notice © Spectron Gas Control Systems GmbH

8 | iTec AS

Spectron Gas Control Systems GmbH Fritz-Klatte-Str. 8, D-65933 Frankfurt Tel.: +49 (0)69 38016-0, Fax: +49 (0)69 38016-200 info@spectron.de www.spectron.de

LINJEREGULATOR LM51-6

Line pressure regulator LM51-6

spectro lab

Ordering information: Line regulator LM51-6

In- / outlets CM CM CE CE B A K M 0

3

2 P1

1/4 - 1/8” / 1/4” / 1/2” - OD compression fitting (brass) 6 - 3 / 6 / 8 / 10 / 12 mm compression fitting (brass) 1/4 - 1/8” / 1/4” / 1/2” -OD compression fitting (stainless steel) 6 - 3 / 6 / 8 / 10 / 12 mm compression fitting (stainless steel) - plug - relief valve - 1/4”-18 NPT-F (P2≤100 bar) - contact gauge - pressure gauge 3 2 - 1/4”-NPT-F (port only)

P2

1

P1

P2

1

4

4 port selection 6

5

6

5

Inlet left: L

Inlet right: R

LM51 - 6 - L - 300 - 20 - 1 - 2 - 3 - 4 - 5 - 6 - N2 Inlet

Outlet pressure P2

Type of gas

L R

1,5 - to 1,5 bar (P1 ≤ 50 bar) 4 - to 4 bar (P1 ≤ 50 bar) 10 - to 10 bar 20 - to 20 bar 50 - to 50 bar 100 - to 100 bar 200 - to 200 bar

Please specify type of gas (for selection of valve seat materials)

- left - right

Inlet pressure P1 10 - max. 10 bar 20 - max. 20 bar 50 - max. 50 bar

100 - max. 100 bar 200 - max. 200 bar 300 - max. 300 bar

Ordering example: LM51-6-L-20-10-CE6-M-M-CE6-B-0-N2

2

Ordering example: LM51-6-R-200-10-0-M-M-CE1/8-A-B-Ar 3

3

1

4

2

4

1

5 6

6 5

Spectron Gas Control Systems GmbH Data sheet DES LM51-6 Edition 1115 Fritz-Klatte-Str. 8, D-65933 Frankfurt Subject to alteration without prior notice Tel.: +49 (0)69 +49 (0)69 38016-200 © Spectron Gas Control Systems GmbH Adr.: Hegdalveien 80, N-3261Larvik | Tlf.: 9538016-0, 800 700 Fax: | e-mail: itec@itec.as | Web: www.itec.as info@spectron.de www.spectron.de

| 9

LINJEREGULATOR LM52exact-2

Line regulator LM52exact-2

Line regulator LM52

spectro lab Specifications • SPECTROLAB-components guarantee maximum quality by using high grade materials and a quality assurance program acc. to ISO 9001.

• All parts in the gas wetted surface area are cleaned in an ultrasonic cleaning system (CFCfree) with the special Cleaning process ® SPECTRO-CLEAN and then baked out.

• SPECTROLAB-components undergo a 100% function- and Helium-leak-test.

exact

-2

Product features • Brass (chrome plated) line pressure regulator • Extremly stable outlet pressure by applied extremly accurate Technology "exact" and anti- vibration device • For non-corrosive gases and gas mixtures up to quality 6.0 • 2 ports for flexible and individual configuration • Suitable for inlet pressures up to 300 bar • Max. outlet pressures 1.5 up to 20 bar • Light weight • Compact design • Metal-to-metal seal to atmosphere • Suitable for ECD-applications • Pressure regulator can be evacuated • Central filter • Approved for use with oxygen • Simple outlet pressure limitation by handwheel • Easy to install • New laboratory-style design • Ergonomically designed

Technical data single-stage EXACT Type max. 300 bar Inlet pressure P1 1.5 / 4 / 10 / 20 bar Outlet pressure P2 Materials Body regulator: chrome plated brass Valve seat: PA Diaphragm: Hastelloy C276 Soft goods: EPDM Filter: Sintered SS 316L 1/4” NPT female In- and outlets -30oC to +60oC Temperature range Leak rate (to atmosphere) 1x10-8 mbar I/s He (via seat) 1x10-6 mbar I/s He CV=0.16 Flow capacitiy 1.0 kg Weight

exact = extremly accurate technology Side view

50

ca. 119 23,5

Ø 50

Dimensions exact LM52 -2

exact

Data sheet DES LM52-2 Edition 0217 Subject to alteration without prior notice © Spectron Gas Control Systems GmbH

10 | iTec AS

Spectron Gas Control Systems GmbH Fritz-Klatte-Str. 8, D-65933 Frankfurt Tel.: +49 (0)69 38016-0, Fax: +49 (0)69 38016-200 info@spectron.de www.spectron.de

LINJEREGULATOR LM52exact-2

Line regulator LM52exact-2

spectro lab

Ordering information: exact Line regulator LM52 -2

In- / outlets CM CM CE CE 0

1/4 - 1/8” / 1/4” / 1/2” - OD compression fitting (brass) 6 - 3 / 6 / 8 / 10 / 12 mm compression fitting (brass) 1/4 - 1/8” / 1/4” / 1/2” - OD compression fitting (stainless steel) 6 - 3 / 6 / 8 / 10 / 12 mm compression fitting (stainless steel) - 1/4”-NPT-F (port only)

P2

P1

2

1

port selection

LM52 - 2 - 300 - 10 - 1 - 2 - N2 Type of gas Inlet pressure P1

Outlet pressure P2

100 - max. 100 bar 200 - max. 200 bar 300 - max. 300 bar

1,5- to 1.5 bar 4 - to 4 bar 10 - to 10 bar 20 - to 20 bar

Please specify type of gas (for selection of valve seat materials)

For inlet pressure up to 50 bar and outlet pressure of max. 1,5 or 4 bar please use M51

Ordering example: LM52-2-300-10-CE6-CE6-N2

1

2

Spectron Gas Control Systems GmbH Data sheet DES LM52-2 Edition 0217 Fritz-Klatte-Str. 8, D-65933 Frankfurt Subject to alteration without prior notice Tel.: |+49 38016-0, Fax: +49itec@itec.as (0)69 38016-200 © Spectron Gas ControlAdr.: Systems GmbH 80, N-3261Larvik Hegdalveien Tlf.:(0)69 95 800 700 | e-mail: | Web: www.itec.as info@spectron.de www.spectron.de

| 11

LINJEREGULATOR LM52exact-4

Line regulator LM52exact-4

spectro lab Specifications • SPECTROLAB-components guarantee maximum quality by using high grade materials and a quality assurance program acc. to ISO 9001.

• All parts in the gas wetted surface area are cleaned in an ultrasonic cleaning system (CFCfree) with the special Cleaning process ® SPECTRO-CLEAN and then baked out.

• SPECTROLAB-components undergo a 100% function- and Helium-leak-test.

Line regulator exact LM52 -4

Product features • Brass (chrome plated) line pressure regulator • Extremly stable outlet pressure by applied extremly accurate Technology "exact" and anti- vibration device • For non-corrosive gases and gas mixtures up to quality 6.0 • 4 ports for flexible and individual configuration • Suitable for inlet pressures up to 300 bar • Max. outlet pressures 1.5 up to 20 bar • Light weight • Compact design • Metal-to-metal seal to atmosphere • Suitable for ECD-applications • Pressure regulator can be evacuated • Central filter • Approved for use with oxygen • Simple outlet pressure limitation by handwheel • Easy to install • New laboratory-style design • Ergonomically designed

Technical data Type single-stage EXACT Inlet pressure P1 max. 300 bar Outlet pressure P2 1.5 / 4 / 10 / 20 bar Materials Body regulator, relief valve: chrome plated brass Valve seat: PA Diaphragm: Hastelloy C276 Soft goods: EPDM Filter: Sintered SS 316L 1/4” NPT female In- and outlets -30oC to +60oC Temperature range Leak rate (to atmosphere) 1x10-8 mbar I/s He (via seat) 1x10-6 mbar I/s He Safety pressure gauges Pressure gauge ISO5171/Kl1.6/NG50 CV=0.16 Flow capacitiy 1.0 kg Weight

exact = extremly accurate technology Dimensions exact LM52 -4

Side view

ca. 119 50

Ø 50

112

23,5

exact

Data sheet DES LM52-4 Edition 0217 Subject to alteration without prior notice © Spectron Gas Control Systems GmbH

12 | iTec AS

Spectron Gas Control Systems GmbH Fritz-Klatte-Str. 8, D-65933 Frankfurt Tel.: +49 (0)69 38016-0, Fax: +49 (0)69 38016-200 info@spectron.de www.spectron.de

LINJEREGULATOR LM52exact-4

Line regulator LM52exact-4 Ordering information: exact Line regulator LM52 -4

spectro lab

In- / outlets CM CM CE CE B A K M 0

2

1/4 - 1/8” / 1/4” / 1/2” - OD compression fitting (brass) 6 - 3 / 6 / 8 / 10 / 12 mm compression fitting (brass) 1/4 - 1/8” / 1/4” / 1/2” - OD compression fitting (stainless steel) 6 - 3 / 6 / 8 / 10 / 12 mm compression fitting (stainless steel) - plug - relief valve - 1/4”-NPT-F - contact gauge - pressure gauge - 1/4”-NPT-F (port only)

P2

P1

1

3 port selection 4

LM52 - 4 - 300 - 10 - 1 - 2 - 3 - 4 - N2

Inlet pressure P1

Outlet pressure P2

Type of gas

100 - max. 100 bar 200 - max. 200 bar 300 - max. 300 bar

1,5- to 1.5 bar 4 - to 4 bar 10 - to 10 bar 20 - to 20 bar

Please specify type of gas (for selection of valve seat materials)

For inlet pressure up to 50 bar and outlet pressure of max. 1,5 or 4 bar please use M51

Ordering example: LM52-4-300-10-CE6-M-CE6-B-N2

2

1

3

4 Spectron Gas Control Systems GmbH Data sheet DES LM52-4 Edition 0217 Fritz-Klatte-Str. 8, D-65933 Frankfurt Subject to alteration without prior notice Tel.: |+49 38016-0, Fax: +49itec@itec.as (0)69 38016-200 © Spectron Gas ControlAdr.: Systems GmbH 80, N-3261Larvik Hegdalveien Tlf.:(0)69 95 800 700 | e-mail: | Web: www.itec.as info@spectron.de www.spectron.de

| 13

LINJEREGULATOR LM52exact-6

Line regulator LM52exact-6

spectro lab Specifications • SPECTROLAB-components guarantee maximum quality by using high grade materials and a quality assurance program acc. to ISO 9001.

• All parts in the gas wetted surface area are cleaned in an ultrasonic cleaning system (CFCfree) with the special Cleaning process ® SPECTRO-CLEAN and then baked out.

• SPECTROLAB-components undergo a 100% function- and Helium-leak-test.

Line regulator exact LM52 -6

Product features • Brass (chrome plated) line pressure regulator • Extremly stable outlet pressure by applied extremly accurate Technology "exact" and anti- vibration device • For non-corrosive gases and gas mixtures up to quality 6.0 • 6 ports for flexible and individual configuration • Suitable for inlet pressures up to 300 bar • Max. outlet pressures 1.5 up to 20 bar • Light weight • Compact design • Metal-to-metal seal to atmosphere • Suitable for ECD-applications • Pressure regulator can be evacuated • Central filter • Approved for use with oxygen • Simple outlet pressure limitation by handwheel • Easy to install • New laboratory-style design • Ergonomically designed

Technical data single-stage EXACT Type max. 300 bar Inlet pressure P1 Outlet pressure P2 1.5 / 4 / 10 / 20 bar Materials Body regulator, relief valve: chrome plated brass Valve seat: PA Diaphragm: Hastelloy C276 Soft goods: EPDM Filter: Sintered SS 316L 1/4” NPT female In- and outlets -30oC to +60oC Temperature range Leak rate (to atmosphere) 1x10-8 mbar I/s He (via seat) 1x10-6 mbar I/s He Safety pressure gauges Pressure gauge ISO5171/Kl1.6/NG50 CV=0.16 Flow capacitiy 1.1 kg Weight

exact = extremly accurate technology Dimensions exact LM52 -6

Side view

ca. 119 23,5

Ø 50

104

110

exact

Data sheet DES LM52-6 Edition 0217 Subject to alteration without prior notice © Spectron Gas Control Systems GmbH

14 | iTec AS

Spectron Gas Control Systems GmbH Fritz-Klatte-Str. 8, D-65933 Frankfurt Tel.: +49 (0)69 38016-0, Fax: +49 (0)69 38016-200 info@spectron.de www.spectron.de

LINJEREGULATOR LM52exact-6

Line regulator LM52exact-6

spectro lab

Ordering information: exact Line regulator LM52 -6

In- / outlets CM CM CE CE B A K M 0

3

2 P1

1/4 - 1/8” / 1/4” / 1/2” - OD compression fitting (brass) 6 - 3 / 6 / 8 / 10 / 12 mm compression fitting (brass) 1/4 - 1/8” / 1/4” / 1/2” - OD compression fitting (stainless steel) 6 - 3 / 6 / 8 / 10 / 12 mm compression fitting (stainless steel) - plug - relief valve - 1/4”-NPT-F - contact gauge - pressure gauge 3 2 - 1/4”-NPT-F (port only)

P2

1

P1

P2

1

4

4 port selection 6

5

6

5

Inlet left: L

Inlet right: R

LM52 - 6 - L - 300 - 20 - 1 - 2 - 3 - 4 - 5 - 6 - N2 Inlet L R

- left - right

Inlet pressure P1

Outlet pressure P2

Type of gas

1,5- to 1.5 bar 4 - to 4 bar 10 - to 10 bar 20 - to 20 bar

Please specify type of gas (for selection of valve seat materials)

100 - max. 100 bar 200 - max. 200 bar 300 - max. 300 bar For inlet pressure up to 50 bar and outlet pressure of max. 1,5 or 4 bar please use M51

Ordering example: LM52-6-L-20-10-CE6-M-M-CE6-A-B-N2

2

Ordering example: LM52-6-R-200-10-0-M-M-CE1/8-A-B-Ar 2

3

3

1 4

1

4

5

6

6 5

Spectron Gas Control Systems GmbH Data sheet DES LM52-6 Edition 0217 Fritz-Klatte-Str. 8, D-65933 Frankfurt Subject to alteration without prior notice Tel.: |+49 38016-0, Fax: +49itec@itec.as (0)69 38016-200 © Spectron Gas ControlAdr.: Systems GmbH 80, N-3261Larvik Hegdalveien Tlf.:(0)69 95 800 700 | e-mail: | Web: www.itec.as info@spectron.de www.spectron.de

| 15

LINJEREGULATOR LM53-2

Line pressure regulator LM53-2

spectro lab

Specifications • SPECTROLAB-components guarantee maximum quality by using high grade materials and a quality assurance program acc. to ISO 9001.

• All parts in the gas wetted surface area are cleaned in an ultrasonic cleaning system (CFCfree) with the special Cleaning process ® SPECTRO-CLEAN and then baked out.

• SPECTROLAB-components undergo a 100% function- and Helium-leak-test.

Line pressure regulator LM53-2

Product features

Technical data double-stage Type max. 300 bar Inlet pressure P1 1.5 / 4 / 10 / 20 bar Outlet pressure P2 Materials Body regulator, relief valve: chrome plated brass Valve seat: PA Diaphragm: Hastelloy C276 Soft goods: EPDM Filter: Sintered bronze 1/4” NPT-F In- and outlets -30oC to +60oC Temperature range Leak rate (to atmosphere) 1x10-8 mbar I/s He (via seat) 1x10-6 mbar I/s He 1.6 kg Weight

• 2-stage diaphragm line pressure regulator with extremly stable outlet pressure and anti-vibration device • For non-corrosive gases and gas mixtures up to quality 6.0 • 2 ports for flexible and individual configuration • New laboratory-style design • Central filter • Suitable for ECD-applications • Pressure regulator can be evacuated • Suitable for inlet pressures up to 300 bar • Max. outlet pressures 1.5 up to 20 bar • Light weight • Compact design • Approved for use with oxygen • Simple outlet pressure limitation by handwheel • Easy to install

Outlet pressure P2 [bar]

Flow curves LM53 10

Inlet pressure P1 = 21 bar

8 6 4 2 0

0,2 0,3

0,5

Data sheet DES LM53-2 Edition 1115 Subject to alteration without prior notice © Spectron Gas Control Systems GmbH

16 | iTec AS

1

2

3

4

5

10

20

Spectron Gas Control Systems GmbH Fritz-Klatte-Str. 8, D-65933 Frankfurt Tel.: +49 (0)69 38016-0, Fax: +49 (0)69 38016-200 info@spectron.de www.spectron.de

30

Flow rate 3 Q [m /h air]

LINJEREGULATOR LM53-2

Line pressure regulator LM53-2

spectro lab

Dimensions

157 115

Ø 50

50

42

24,5

90,5

Ordering information: Line pressure regulator LM53

In- / outlets CM CM CE CE 0

P1

1/4 - 1/8” / 1/4” / 1/2” - OD compression fitting (brass) 6 - 3 / 6 / 8 / 10 / 12 mm compression fitting (brass) 1/4 - 1/8” / 1/4” / ½” - OD compression fitting (stainless steel) 6 - 3 / 6 / 8 / 10 / 12 mm compression fitting (stainless steel) - 1/4” NPT-F (port only)

P2

1

2 port selection

LM53 - 2 - 300 - 20 - 1 - 2 - N2 Inlet pressure P1

Outlet pressure P2

Type of gas

100 - max. 100 bar 200 - max. 200 bar 300 - max. 300 bar

1,5 - to 1.5 bar 4 - to 4 bar 10 - to 10 bar 20 - to 20 bar

Please specify type of gas (for selection of valve seat materials)

For inlet pressure up to 50 bar and outlet pressure of max. 1,5 or 4 bar please use M51 Spectron Gas Control Systems GmbH Data sheet DES LM53-2 Edition 1115 Fritz-Klatte-Str. 8, D-65933 Frankfurt Subject to alteration without prior notice Tel.: +49 38016-0, Fax: +49 (0)69 38016-200 © Spectron Gas ControlAdr.: Systems GmbH 80, N-3261Larvik | Tlf.: (0)69 Hegdalveien 95 800 700 | e-mail: itec@itec.as | Web: www.itec.as info@spectron.de www.spectron.de

| 17

LINJEREGULATOR LM53-6

Line pressure regulator LM53-6

spectro lab

Line pressure regulator LM53-6

Product features

Technical data Type double-stage Inlet pressure P1 max. 300 bar Outlet pressure P2 1.5 / 4 / 10 / 20 bar Materials Body regulator, relief valve: chrome plated brass Valve seat: PA Diaphragm: Hastelloy C276 Soft goods: EPDM Filter: Sintered bronze 1/4” NPT-F In- and outlets -30oC to +60oC Temperature range Leak rate (to atmosphere) 1x10-8 mbar I/s He (via seat) 1x10-6 mbar I/s He Safety pressure gauges Pressure gauge ISO5171/Kl1.6/NG50 1.7 kg Weight

• 2-stage diaphragm line pressure regulator with extremly stable outlet pressure and anti-vibration device • For non-corrosive gases and gas mixtures up to quality 6.0 • 6 ports for flexible and individual configuration • New laboratory-style design • Central filter • Suitable for ECD-applications • Pressure regulator can be evacuated • Suitable for inlet pressures up to 300 bar • Max. outlet pressures 1.5 up to 20 bar • Light weight • Compact design • Approved for use with oxygen • Simple outlet pressure limitation by handwheel • Easy to install

Outlet pressure P2 [bar]

Flow curves LM53 10

Inlet pressure P1 = 21 bar

8 6 4 2 0

0,2 0,3

0,5

Data sheet DES LM53-6 Edition 1115 Subject to alteration without prior notice © Spectron Gas Control Systems GmbH

18 | iTec AS

1

2

3

4

5

10

20

Spectron Gas Control Systems GmbH Fritz-Klatte-Str. 8, D-65933 Frankfurt Tel.: +49 (0)69 38016-0, Fax: +49 (0)69 38016-200 info@spectron.de www.spectron.de

30

Flow rate 3 Q [m /h air]

LINJEREGULATOR LM53-6

spectro lab

Line pressure regulator LM53-6 Dimensions

157

110

55

Ø 50

77

115

42

90,5

24,5

Ordering information: Line pressure regulator LM53

In- / outlets CM CM CE CE B A K M 0

3

2 P1

1/4 - 1/8” / 1/4” / 1/2” - OD compression fitting (brass) 6 - 3 / 6 / 8 / 10 / 12 mm compression fitting (brass) 1/4 - 1/8” / 1/4” / ½” - OD compression fitting (stainless steel) 6 - 3 / 6 / 8 / 10 / 12 mm compression fitting (stainless steel) - plug - relief valve - 1/4” NPT-F - contact gauge - pressure gauge 3 2 - 1/4” NPT-F (port only)

P2

1

P1

P2

1

4

4 port selection 6

5

5

Inlet left: L

6

Inlet right: R

LM53 - L - 300 - 20 - 1 - 2 - 3 - 4 - 5 - 6 - N2 Inlet

Outlet pressure P2

Type of gas

L R

1,5 - to 1.5 bar 4 - to 4 bar 10 - to 10 bar 20 - to 20 bar

Please specify type of gas (for selection of valve seat materials)

- left - right

Inlet pressure P1 100 - max. 100 bar 200 - max. 200 bar 300 - max. 300 bar

For inlet pressure up to 50 bar and outlet pressure of max. 1,5 or 4 bar please use M51

Spectron Gas Control Systems GmbH Data sheet DES LM53-6 Edition 1115 Fritz-Klatte-Str. 8, D-65933 Frankfurt Subject to alteration without prior notice Tel.:| Tlf.: +49 (0)69 38016-0, Fax: +49 (0)69 38016-200 © Spectron Gas ControlAdr.: Systems GmbH 80, N-3261Larvik Hegdalveien 95 800 700 | e-mail: itec@itec.as | Web: www.itec.as info@spectron.de www.spectron.de

| 19

LINJEREGULATOR LM61/LM62

Line pressure regulator LM61 / LM62

spectro lab Dimensions Pressure regulator LM61 / LM62

ca. 106

ca. 136

60

Line pressure regulator LM61 / LM62 Product features

Technical data

• Single- or double-stage line pressure regulator for non- corrosive gases and gas mixtures up to quality 6.0 • New laboratory-style design • Central filter • High control accuracy • Integrated relief valve • Tested for use with oxygen • Suitable for ECD-applications • Simple outlet pressure limitation by handwheel • Powder-coated bonnet • Piston type regulators for outlet pressure >20 bar

Inlet pressure P1 Max. outlet pressure P2 Flow rate Q Materials Body: Diaphragm: Valve seat: Piston (P2>20 bar): Connectors Relief valve connector Leak rate Weight

max. 300 bar 1,5/4/10/20/50/100 bar see flow curves chrome-plated brass stainless steel 1.4310 PA 11 or EPDM Messing 1/4” NPT female 1/8” NPT female 1x10-8 mbar l/s He 1,3 kg (LM61) 1,6 kg (LM62)

Outlet pressure P2 [bar]

Flow curves LM61 / LM62 10 8 6

LM61

4

Inlet pressure P1 = 21 bar

2

Outlet pressure P2 [bar]

0

0,2 0,3

0,5

2

3

4

5

10

20

Flow rate 3 Q [m /h] air

Lm62 4

Inlet pressure P1 = 9 bar

2 0

0,2 0,3

0,5

Data sheet DES LM61LM62 - Edition 0111 Subject to alteration without prior notice © Spectron Gas Control Systems GmbH

20 | iTec AS

1

1

2

3

4

5

10

Spectron Gas Control Systems GmbH Fritz-Klatte-Str. 8, D-65933 Frankfurt Tel.: +49 (0)69 38016-0, Fax: +49 (0)69 38016-200 info@spectron.de www.spectron.de

Flow rate 3 Q [m /h] air

LINJEREGULATOR LM61/LM62

Line pressure regulator LM61 / LM62

spectro lab

Dimensions - pressure regulator LM61 / LM62 side view ca. 136

rear view / mounting information

LM61 / LM62

Additional configurations upon request!

ca. 105

ca. 32 LM62: 68,5

60

14

M5

1/4” NPT

1/4” NPT

ca. 106

1/8" NPT

14 14

LM61

LM61 / LM62

Ordering information: LM61 / LM62 series line pressure regulators

LM 61 - 200 - 10 - M - M - A - N2

Type

Type of gas

61 - single-stage 62 - double-stage

Please specify type of gas!

Inlet pressure P1

Relief valve

40 - max. 40 bar (only LM61) 200 - max. 200 bar 300 - max. 300 bar

B A

Outlet pressure P2

- without relief valve (plug) - relief valve

Outlet press. indication

1,5 - to 1,5 bar (LM62) 20 - to 20 bar 4 - to 4 bar (LM62) 50 - to 50 bar (piston type) 10 - to 10 bar 100 - to 100 bar (piston type)

B M 0

Inlet press. indication

- plug - pressure gauge - 1/4”-NPT-F (port only)

B - plug M - pressure gauge 0 - 1/4”-NPT-F (port only)

Specifications

Pressure indication

• SPECTROLAB - components guarantee maximum quality by using high grade materials and a quality assurance program acc. to ISO 9001.

• All pressure regulators are equipped with pressure gauges for inlet- and outlet pressure indication.

• All components which come into contact with the medium are cleaned in an ultrasonic cleaning system (CFC-free) with the special cleaning ® process SPECTRO-CLEAN and are then baked out.

• SPECTROLAB - components undergo a 100% Helium-leak-test.

Important note regarding component selection • In order to assure safe operation it is essential to take the configuration of the whole system into account when selecting a pressure regulator.

• The function of the regulator, the compatibility of the materials, correlating temperature ranges, correct installation, operation and maintenance in accordance with the relevant regulations are the responsibility of the system designer and the user.

Spectron Gas Control Systems GmbH Data sheet DES LM61LM62 - Edition 0111 Fritz-Klatte-Str. 8, D-65933 Frankfurt Subject to alteration without prior notice Tel.: +49 (0)6995 38016-0, +49 (0)69 38016-200 © Spectron Gas ControlAdr.: Systems GmbH 80, N-3261Larvik Hegdalveien | Tlf.: 800 700Fax: | e-mail: itec@itec.as | Web: www.itec.as info@spectron.de www.spectron.de

| 21

LINJEREGULATOR LM71

Line pressure regulator LM71

spectro lab

Dimensions Pressure regulator LM71 0

3/8-NPT

3/8-NPT

Ø5

Ø 65

Pressure regulator LM71

Product features

Technical data

• Single-stage line pressure regulator for noncorrosive gases and gas mixtures up to quality 6.0.

• New laboratory-style design • High control accuracy • Suitable for ECD-applications • Simple outlet pressure limitation by handwheel • Powder-coated bonnet

Inlet pressure P1 Outlet pressure P2 Flow rate Q Materials Body: Diaphragm: Valve seat: In- / outlet Pressure gauge connect.

Leak rate Weight

max. 50 bar max. 20 bar see flow curves chrome-plated brass Hastelloy PTFE 3/8”-NPT female 1/4”-NPT female 1x10-8 mbar l/s He 1,5 kg

Outlet pressure P2 [bar]

Flow curves LM71 10 9 8 7 6 5 4 3 2 1 0

P1 = 10 bar P1 = 7 bar P1 = 5 bar

0

5 10

Data sheet DES LM71 Edition 1116 Subject to alteration without prior notice © Spectron Gas Control Systems GmbH

22 | iTec AS

20

30

40

50

60

70

Spectron Gas Control Systems GmbH Fritz-Klatte-Str. 8, D-65933 Frankfurt Tel.: +49 (0)69 38016-0, Fax: +49 (0)69 38016-200 info@spectron.de www.spectron.de

Flow rate 3 Q [m /h] Nitrogen

LINJEREGULATOR LM71

Line pressure regulator LM71

Dimensions - LM71

spectro lab

side view

rear view / mounting

0

ca. 95

Ø5

hex: 60 Ø 65

11

SW 40 54

3/8-NPT

45°

3/8-NPT

Ø 60

M5

115

Ordering information: LM71 series pressure regulators

LM71 - 50 - 10 - 0 - M - 0 - N2 Inlet pressure P1 50 - max. 50 bar

Type of gas Please specify type of gas!

Outlet pressure P2

Outlet press. indication

1,5 4 10 20

B M 0

- to 1,5 bar - to 4 bar - to 10 bar - to 20 bar

- plug - pressure gauge - 1/4”-NPT port

Specifications

Important note regarding component selection

• SPECTROLAB - components guarantee maximum quality by using high grade materials and a quality assurance program acc. to ISO 9001.

• All components which come into contact with the medium are cleaned in an ultrasonic cleaning system (CFC-free) with the special cleaning ® process SPECTRO-CLEAN and are then baked out.

• SPECTROLAB - components undergo a 100% function- and Helium-leak-test.

• In order to assure safe operation it is essential to take the configuration of the whole system into account when selecting a control panel.

• The function of the components, the compatibility of the materials, correlating temperature ranges, correct installation, operation and maintenance in accordance with the relevant regulations are the responsibility of the system designer and the user.

Spectron Gas Control Systems GmbH Data sheet DES LM71 Edition 1116 Fritz-Klatte-Str. 8, D-65933 Frankfurt Subject to alteration without prior notice Tel.: +49 (0)69 38016-0, +49itec@itec.as (0)69 38016-200 © Spectron Gas ControlAdr.: Systems GmbH 80, N-3261Larvik Hegdalveien | Tlf.: 95 800 700 |Fax: e-mail: | Web: www.itec.as info@spectron.de www.spectron.de

| 23

Flaskeregulator FM53/FE53

FLASKEREGULATOR FM45

Cylinder regulator FM45

spectro lab

approx. 55

approx. 110

D = 42

Cylinder pressure regulator FM45

Product features • Single-stage cylinder pressure regulator with compensated main valve for improved performance • Simple and safe gas withdrawal from gas cylinders, for non-corrosive gases and gas mixtures up to quality 6.0 • Compensated main valve for significantly improved outlet pressure accuracy similar to a dual-stage regulator • Compact design, light weight • New laboratory-style design • Manual cylinder connection (for non-metal-to-metal sealing cylinder connections) • Suitable for ECD-applications • High control accuracy • Integrated relief valve • Hastelloy-diaphragm • Minimised gas-wetted surface

Technical data max. 230 bar 300 bar on request 0.1 - 10 bar

Inlet pressure P1 Outlet pressure P2 Materials Body: Diaphragm: Valve seat: Cylinder connection

chrome-plated brass Hastelloy C276 PCTFE 1) acc. to international standards and gas type 1/8”-NPT female Outlet connector Temperature range -30°C to +60°C Leak rate (to atmosphere) 10-8 mbar l/sec He 520 g Weight 1

) Other valve seat materials such as PVDF upon request

Flow curves FM45 Inlet pressure P1 = 9 bar

Outlet pressure P2 [ bar ]

Inlet pressure P1 = 20 bar 4

3 2 1

0

0.2

0.4

0.6

0.8

1

2

3

5

4 3

Flow rate Q [ m /h air ]

Spectron Gas Control Systems GmbH Data sheet DES FM45 Edition 1014 Fritz-Klatte-Str. 8, D-65933 Frankfurt Subject to alteration without prior notice Tel.: +49 38016-0, Fax: +49 (0)69 38016-200 © Spectron Gas ControlAdr.: Systems GmbH 80, N-3261Larvik | Tlf.:(0)69 Hegdalveien 95 800 700 | e-mail: itec@itec.as | Web: www.itec.as info@spectron.de www.spectron.de

| 25

FLASKEREGULATOR FM45

Cylinder regulator FM45

spectro lab

Dimensions

side view

D = 42

approx. 55

approx. 110

Outlet P2 1/8”-NPT

Additional configurations upon request!

35

60

Ordering information: FM45 series cylinder regulators

FM45 - 230 - 4 - DIN477-1 - H2 Type of gas

Inlet pressure P1 230 - max. 230 bar

Please specify type of gas (for selection of valve seat material)

Outlet pressure P2

Cylinder connection

1,5 - up to 1.5 bar 4 - up to 4 bar 10 - up to 10 bar

Detailed description of the cylinder connection including the relevant standard and the number of the connection (e.g.

DIN477-1)

Specifications

Pressure indication

• SPECTROLAB - components guarantee maximum quality by using high grade materials and a quality assurance program acc. to ISO 9001.

• All pressure regulators are equipped with pressure gauges for inlet- and outlet pressure indication.

• All components which come into contact with the medium are cleaned in an ultrasonic cleaning system (CFC-free) with the special cleaning ® process SPECTRO-CLEAN and are then baked out.

• SPECTROLAB - components undergo a 100% function- and Helium-leak-test.

Data sheet DES FM45 Edition 1014 Subject to alteration without prior notice © Spectron Gas Control Systems GmbH

26 | iTec AS

Important note regarding component selection • In order to assure safe operation it is essential to take the configuration of the whole gas supply system into account when selecting a pressure regulator.

• The function of the regulator, the compatibility of the materials, correlating temperature ranges, correct installation, operation and maintenance in accordance with the relevant regulations are the responsibility of the system designer and the user.

Spectron Gas Control Systems GmbH Fritz-Klatte-Str. 8, D-65933 Frankfurt Tel.: +49 (0)69 38016-0, Fax: +49 (0)69 38016-200 info@spectron.de www.spectron.de

FLASKEREGULATOR FM51

Cylinder regulator FM51

spectro lab Specifications • SPECTROLAB-components guarantee maximum quality by using high grade materials and a quality assurance program acc. to ISO 9001.

• All parts in the gas wetted surface area are cleaned in an ultrasonic cleaning system (CFCfree) with the special Cleaning process ® SPECTRO-CLEAN and then baked out.

• SPECTROLAB-components undergo a 100% function- and Helium-leak-test.

Cylinder regulator FM51

Product features • Brass (chrome plated) cylinder pressure regulator • For non-corrosive gases and gas mixtures up to quality 6.0 • 6 ports for flexible and individual configuration • Very stable outlet pressure • Suitable for inlet pressures up to 300 bar • Max. outlet pressures 1,5 up to 200 bar * • Metal-to-metal seal to atmosphere • Suitable for ECD-applications • Pressure regulator can be evacuated • Inlet filter • Approved for use with oxygen • Simple outlet pressure limitation by handwheel • Easy to install • New laboratory-style design • Ergonomically designed

* 1,5 / 4 bar only for inlet pressure ≤ 50 bar

Dimensions FM51

Technical data Type Inlet pressure P1 Outlet pressure P2

single-stage max. 300 bar 1,5 / 4 bar (P1 ≤ 50 bar) 10 / 20 / 50 / 100 / 200 bar (P1 > 50 bar)

Materials Body regulator, relief valve: chrome plated brass Valve seat: PA Diaphragm: Hastelloy C276 Filter: Sintered SS 316L 1/4” NPT-F In- and outlets -30oC to +60oC Temperature range Leak rate (to atmosphere) 1x10-8 mbar I/s He (via seat) 1x10-6 mbar I/s He Safety pressure gauges Pressure gauge ISO5171/Kl1.6/NG50 CV=0.15 Flow capacitiy 1.2 kg Weight

Side view

153

ca. 119

Ø 50

104

23,5

134 Spectron Gas Control Systems GmbH Data sheet DES FM51 Edition 1115 Fritz-Klatte-Str. 8, D-65933 Frankfurt Subject to alteration without prior notice Tel.: +49 38016-0, Fax: +49 (0)69 38016-200 © Spectron Gas ControlAdr.: Systems GmbH 80, N-3261Larvik | Tlf.: (0)69 Hegdalveien 95 800 700 | e-mail: itec@itec.as | Web: www.itec.as info@spectron.de www.spectron.de

| 27

FLASKEREGULATOR FM51

Cylinder regulator FM51 In- / outlets

Ordering information: Cylinder regulator FM51

CM 1/4 - 1/8” / 1/4” / 1/2” - OD compression fitting (brass) CM 6 - 3 / 6 / 8 / 10 / 12 mm compression fitting (brass) CE 1/4 - 1/8” / 1/4” / ½” - OD compression fitting (stainless steel) CE 6 - 3 / 6 / 8 / 10 / 12 mm compression fitting (stainless steel) B - plug A - relief valve - 1/4”-18 NPT-F (P2≤100 bar) xxxx - detailed specification of cylinder connection including the relevant standard and number (e.g. BS no.3 for nitrogen up to 230 bar) K - contact gauge M - pressure gauge 3 2 0 - 1/4”-NPT-F (port only)

3

2 P1

spectro lab

P2

1

P1

P2

1

4

4 port selection 6

5

6

5

Inlet left: L

Inlet right: R

FM51 - L - 300 - 20 - 1 - 2 - 3 - 4 - 5 - 6 - N2 Inlet

Outlet pressure P2

Type of gas

L R

1,5 - to 1,5 bar (P1 ≤ 50 bar) 4 - to 4 bar (P1 ≤ 50 bar) 10 - to 10 bar 20 - to 20 bar 50 - to 50 bar 100 - to 100 bar 200 - to 200 bar

Please specify type of gas (for selection of valve seat materials)

- left - right

Inlet pressure P1 10 - max. 10 bar 20 - max. 20 bar 50 - max. 50 bar

100 - max. 100 bar 200 - max. 200 bar 300 - max. 300 bar

Ordering example: FM51-L-200-10-DIN10-M-M-CE6-A-B-N2

2

Ordering example: FM51-R-200-10-CGA540-M-M-CE1/8-A-B-Ar

3

2

3

1 4

1

4

6

6

5 5

Data sheet DES FM51 Edition 1115 Subject to alteration without prior notice © Spectron Gas Control Systems GmbH

28 | iTec AS

Spectron Gas Control Systems GmbH Fritz-Klatte-Str. 8, D-65933 Frankfurt Tel.: +49 (0)69 38016-0, Fax: +49 (0)69 38016-200 info@spectron.de www.spectron.de

FLASKEREGULATOR FM52exact

Cylinder regulator FM52exact

spectro lab

Specifications • SPECTROLAB-components guarantee maximum quality by using high grade materials and a quality assurance program acc. to ISO 9001.

• All parts in the gas wetted surface area are cleaned in an ultrasonic cleaning system (CFCfree) with the special Cleaning process ® SPECTRO-CLEAN and then baked out.

• SPECTROLAB-components undergo a 100% function- and Helium-leak-test.

Cylinder regulator FM52exact

Product features • Brass (chrome plated) cylinder pressure regulator • Extremly stable outlet pressure by applied extremly accurate Technology "exact" and anti- vibration device • For non-corrosive gases and gas mixtures up to quality 6.0 • 6 ports for flexible and individual configuration • Suitable for inlet pressures up to 300 bar • Max. outlet pressures 1.5 up to 20 bar • Light weight • Compact design • Metal-to-metal seal to atmosphere • Suitable for ECD-applications • Pressure regulator can be evacuated • Central filter • Approved for use with oxygen • Simple outlet pressure limitation by handwheel • Easy to install • New laboratory-style design • Ergonomically designed

Technical data single-stage EXACT Type max. 300 bar Inlet pressure P1 Outlet pressure P2 1.5 / 4 / 10 / 20 bar Materials Body regulator, relief valve: chrome plated brass Valve seat: PA Diaphragm: Hastelloy C276 Soft goods: EPDM Filter: Sintered SS 316L 1/4” NPT female In- and outlets -30oC to +60oC Temperature range Leak rate (to atmosphere) 1x10-8 mbar I/s He (via seat) 1x10-6 mbar I/s He Safety pressure gauges Pressure gauge ISO5171/Kl1.6/NG50 CV=0.16 Flow capacitiy 1.2 kg Weight

exact = extremly accurate technology Dimensions

Side view FM52

153

exact

approx. 119

exact

Ø 50

104

23,5

134 Spectron Gas Control Systems GmbH Data sheet DES FM52 Edition 0217 Fritz-Klatte-Str. 8, D-65933 Frankfurt Subject to alteration without prior notice Tel.:| +49 38016-0, Fax: +49 (0)69 38016-200 © Spectron Gas ControlAdr.: Systems GmbH 80, N-3261Larvik Hegdalveien Tlf.:(0)69 95 800 700 | e-mail: itec@itec.as | Web: www.itec.as info@spectron.de www.spectron.de

| 29

FLASKEREGULATOR FM52exact

Cylinder regulator FM52exact In- / outlets

Ordering information: exact Cylinder regulator FM52

CM 1/4 - 1/8” / 1/4” / 1/2” - OD compression fitting (brass) CM 6 - 3 / 6 / 8 / 10 / 12 mm compression fitting (brass) CE 1/4 - 1/8” / 1/4” / ½” - OD compression fitting (stainless steel) CE 6 - 3 / 6 / 8 / 10 / 12 mm compression fitting (stainless steel) B - plug A - relief valve - 1/4”-NPT-F xxxx - detailed specification of cylinder connection including the relevant standard and number (e.g. BS no.3 for nitrogen up to 230 bar) K - contact gauge M - pressure gauge 3 2 0 - 1/4”-NPT-F (port only)

3

2 P1

spectro lab

P2

1

P1

P2

1

4

4 port selection 6

5

6

5

Inlet left: L

Inlet right: R

FM52 - L - 300 - 20 - 1 - 2 - 3 - 4 - 5 - 6 - N2 Inlet

Outlet pressure P2

Type of gas

L R

1,5 - to 1.5 bar 4 - to 4 bar 10 - to 10 bar 20 - to 20 bar

Please specify type of gas (for selection of valve seat materials)

- left - right

Inlet pressure P1 100 - max. 100 bar 200 - max. 200 bar 300 - max. 300 bar

For inlet pressure up to 50 bar and outlet pressure of max. 1,5 or 4 bar please use M51

Ordering example: FM52-L-200-10-DIN10-M-M-CE6-A-B-N2

Ordering example: FM52-R-200-10-CGA540-M-M-CE1/8-A-B-Ar

3

2

2

3

1 4 1

4

6

5

6 5

Data sheet DES FM52 Edition 0217 Subject to alteration without prior notice © Spectron Gas Control Systems GmbH

30 | iTec AS

Spectron Gas Control Systems GmbH Fritz-Klatte-Str. 8, D-65933 Frankfurt Tel.: +49 (0)69 38016-0, Fax: +49 (0)69 38016-200 info@spectron.de www.spectron.de

FLASKEREGULATOR FM53

Cylinder pressure regulator FM53

spectro lab

Cylinder pressure regulator FM53

Product features

Technical data Type double-stage Inlet pressure P1 max. 300 bar Outlet pressure P2 1.5 / 4 / 10 / 20 bar Materials Body regulator, relief valve: chrome plated brass Valve seat: PA Diaphragm: Hastelloy C276 Soft goods: EPDM Filter: Sintered bronze 1/4” NPT-F In- and outlets -30oC to +60oC Temperature range Leak rate (to atmosphere) 1x10-8 mbar I/s He (via seat) 1x10-6 mbar I/s He Safety pressure gauges Pressure gauge ISO5171/Kl1.6/NG50 1.7 kg Weight

• 2-stage diaphragm cylinder pressure regulator with extremly stable outlet pressure and anti-vibration device • For non-corrosive gases and gas mixtures up to quality 6.0 • 6 ports for flexible and individual configuration • New laboratory-style design • Central filter • Suitable for ECD-applications • Pressure regulator can be evacuated • Suitable for inlet pressures up to 300 bar • Max. outlet pressures 1.5 up to 20 bar • Light weight • Compact design • Approved for use with oxygen • Simple outlet pressure limitation by handwheel • Easy to install

Outlet pressure P2 [bar]

Flow curves FM53 10

Inlet pressure P1 = 21 bar

8 6 4 2 0

0,2 0,3

0,5

1

2

3

4

5

10

20

30

Flow rate 3 Q [m /h air]

Spectron Gas Control Systems GmbH Data sheet DES FM53 Edition 1115 Fritz-Klatte-Str. 8, D-65933 Frankfurt Subject to alteration without prior notice Tel.:| +49 38016-0, Fax: +49 (0)69 38016-200 © Spectron Gas ControlAdr.: Systems GmbH 80, N-3261Larvik Hegdalveien Tlf.:(0)69 95 800 700 | e-mail: itec@itec.as | Web: www.itec.as info@spectron.de www.spectron.de

| 31

FLASKEREGULATOR FM53

spectro lab

Cylinder pressure regulator FM53 Dimensions

157

153

55

Ø 50

77

115

134

42

Ordering information: Cylinder pressure regulator FM53

3

2 P1

In- / outlets CM 1/4 - 1/8” / 1/4” / 1/2” - OD compression fitting (brass) CM 6 - 3 / 6 / 8 / 10 / 12 mm compression fitting (brass) CE 1/4 - 1/8” / 1/4” / ½” - OD compression fitting (stainless steel) CE 6 - 3 / 6 / 8 / 10 / 12 mm compression fitting (stainless steel) B - plug A - relief valve - 1/4” NPT-F xxxx - detailed specification of cylinder connection including the relevant standard and number (e.g. BS no.3 for nitrogen up to 230 bar) K - contact gauge M - pressure gauge 3 2 0 - 1/4” NPT-F (port only)

P2

1

90,5

24,5

P1

P2

1

4

4 port selection 6

5

5

Inlet left: L

6

Inlet right: R

FM53 - L - 300 - 20 - 1 - 2 - 3 - 4 - 5 - 6 - N2 Inlet

Outlet pressure P2

Type of gas

L R

1,5 - to 1.5 bar 4 - to 4 bar 10 - to 10 bar 20 - to 20 bar

Please specify type of gas (for selection of valve seat materials)

- left - right

Inlet pressure P1 100 - max. 100 bar 200 - max. 200 bar 300 - max. 300 bar

For inlet pressure up to 50 bar and outlet pressure of max. 1,5 or 4 bar please use M51

Data sheet DES FM53 Edition 1115 Subject to alteration without prior notice © Spectron Gas Control Systems GmbH

32 | iTec AS

Spectron Gas Control Systems GmbH Fritz-Klatte-Str. 8, D-65933 Frankfurt Tel.: +49 (0)69 38016-0, Fax: +49 (0)69 38016-200 info@spectron.de www.spectron.de

FLASKEREGULATOR FM61/FM62

spectro lab

Cylinder regulator FM 61/ FM 62

1/4-18NPT

Dimensions FM61/FM62

approx. 102

Cylinder regulator FM 61

approx. 70

for P1=300 bar: approx. 112

Technical data Inlet pressure P1 Max. Outlet pressure P2 Flow rate Q Materials Body: Diaphragms: Valve seat:

Product features • Single- and dual-stage cylinder pressure regulators • Simple and safe gas withdrawal from gas cylinders, for non- corrosive gases and gas mixtures up to quality 6.0 • New laboratory-style design • Manual cylinder connection (not for metal-to-metal sealing connections) • Ergonomically designed • Filter at the regulator inlet • Suitable for ECD-applications • High control accuracy • Integrated relief valve • Simple outlet pressure limitation by handwheel • Powder-coated bonnet • Piston type regulators for outlet pressure >20 bar • Tested for use with oxygen • Compact design

Piston (P2>20 bar): Cylinder connection Outlet connector Relief valve connector Leak rate Weight

max. 200/300 bar 1,5/4/10/20/50/100 bar see flow curves chrome-plated brass SS 1.4310 (SS 301) PA11 or EPDM, depending on gas type brass acc. to international standards and gas type 1/4”-18 NPT-F 1/8”-27 NPT-F 10-8 mbar l/s He 1,8 kg (FM61) 2,1 kg (FM62)

Outlet pressure P2 [ bar ]

Flow curves FM 61 / FM 62 10

Inlet pressure P1 = 21 bar

6 4 2 0

Outlet pressure P2 [ bar ]

FM 61

8

0,2 0,3

0,5

1

2

3

4

5

10

20

Flow rate Q [ m3/h air ]

FM 62

Inlet pressure P1 = 9 bar

4 2 0

0,2 0,3

0,5

1

2

3

4

5

10

Flow rate Q [ m3/h air ]

Messer Cutting & Welding GmbH Data sheet DES FM61FM62 - Edition 0708 Lärchenstr. 139a, D-65933 Frankfurt Subject to alteration without prior notice Tel.: +49| Tlf.: (0)6995 38016-0, +49 (0)69 38016-200 © Messer Cutting & Welding Adr.: GmbH Hegdalveien 80, N-3261Larvik 800 700Fax: | e-mail: itec@itec.as | Web: www.itec.as spectron@messer-cw.de www.spectron.de

| 33

FLASKEREGULATOR FM61/FM62

spectro lab

Cylinder regulator FM 61/ FM 62 Cylinder pressure regulator FM61/FM62

Side view

approx. 102

approx. 70

Type 61 62

approx. 32 FM62: approx. 112

for P1=300 bar: approx. 112

Additional configurations upon request!

D = 60

1/4-18NPT

approx. 75

1/8-27NPT

Ordering information: FM 61/ FM 62 series cylinder regulators

FM 61 - 200 - 10 - DIN 10 - N2

Type of gas

- single-stage regulator - dual-stage regulator

Please specify gas type!

Inlet pressure P1 200 300

Cylinder connection

- max. 200 bar - max. 300 bar

Outlet pressure P2 1,5 - up to 1,5 bar (2-stage only) 4 - up to 4 bar (2-stage only) 10 - up to 10 bar (2-stage only)

Please specify gas type with your order (valve seat material)

20 - up to 20 bar (1-stage) 50 - up to 50 bar (1-stage, piston type regulator) 100 - up to 100 bar (1-stage, piston type regulator)

Detailed description of the cylinder connection including the relevant standard and the number of the connection (e.g. BS no. 3)

Specifications

Pressure indication

• SPECTROLAB - components guarantee maximum quality by using high grade materials and a quality assurance program acc. to ISO 9001.

• All pressure regulators are equipped with pressure gauges for inlet- and outlet pressure indication.

• All components which come into contact with the medium are cleaned in an ultrasonic cleaning system (CFC-free) with the special cleaning process SPECTRO-CLEAN® and are then baked out.

• SPECTROLAB - components undergo a 100% Helium-leak-test.

Data sheet DES FM61FM62 - Edition 0708 Subject to alteration without prior notice © Messer Cutting & Welding GmbH 34 | iTec AS

Important note regarding component selection • In order to assure safe operation it is essential to take the configuration of the whole system into account when selecting a pressure regulator.

• The function of the regulator, the compatibility of the materials, correlating temperature ranges, correct installation, operation and maintenance in accordance with the relevant regulations are the responsibility of the system designer and the user.

Messer Cutting & Welding GmbH Lärchenstr. 139a, D-65933 Frankfurt Tel.: +49 (0)69 38016-0, Fax: +49 (0)69 38016-200 spectron@messer-cw.de www.spectron.de

Flaskeregulator FM51/FE51

PANELREGULATOR PM51-2

Panel regulator PM51-2

spectro lab

Example: PM51 panel mounted

Panel regulator PM51-2

Product features • Brass (chrome plated) panel pressure regulator • For non-corrosive gases and gas mixtures up to quality 6.0 • 2 ports for flexible and individual configuration • Very stable outlet pressure • Suitable for inlet pressures up to 300 bar • Max. outlet pressures 1,5 up to 200 bar * • Metal-to-metal seal to atmosphere • Suitable for ECD-applications • Pressure regulator can be evacuated • Inlet filter • Approved for use with oxygen • Simple outlet pressure limitation by handwheel • Easy to install • New laboratory-style design • Ergonomically designed

Technical data Type Inlet pressure P1 Outlet pressure P2

Materials Body regulator: Valve seat: Diaphragm: Filter: In- and outlets Temperature range Leak rate (to atmosphere) (via seat) Flow capacitiy Weight

single-stage max. 300 bar 1,5 / 4 bar (P1 ≤ 50 bar) 10 / 20 / 50 / 100 / 200 bar (P1 > 50 bar) chrome plated brass PA Hastelloy C276 Sintered SS 316L 1/4” NPT-F -30oC to +60oC 1x10-8 mbar I/s He 1x10-6 mbar I/s He CV=0.15 1.0 kg

* 1,5 / 4 bar only for inlet pressure ≤ 50 bar

Dimensions PM51-2

Side view

ca. 119

41

23,5

Ø 50

50

Bore template for panel mounting

Fixing holes for panel surface mounting

) (M6

33 Data sheet DES PM51-2 Edition 1115 Subject to alteration without prior notice © Spectron Gas Control Systems GmbH

36 | iTec AS

Spectron Gas Control Systems GmbH Fritz-Klatte-Str. 8, D-65933 Frankfurt Tel.: +49 (0)69 38016-0, Fax: +49 (0)69 38016-200 info@spectron.de www.spectron.de

PANELREGULATOR PM51-2

Panel regulator PM51-2

spectro lab

Ordering information: Panel regulator PM51-2

In- / outlets CM CM CE CE 0

1/4 - 1/8” / 1/4” / 1/2” - OD compression fitting (brass) 6 - 3 / 6 / 8 / 10 / 12 mm compression fitting (brass) 1/4 - 1/8” / 1/4” / 1/2” - OD compression fitting (stainless steel) 6 - 3 / 6 / 8 / 10 / 12 mm compression fitting (stainless steel) - 1/4”-NPT-F (port only)

P2

P1

2

1

port selection

PM51 - 2 - 300 - 10 - 1 - 2 - N2 Outlet pressure P2

Inlet pressure P1 10 - max. 10 bar 20 - max. 20 bar 50 - max. 50 bar

100 - max. 100 bar 200 - max. 200 bar 300 - max. 300 bar

1,5 - to 1,5 bar (P1 ≤ 50 bar) 4 - to 4 bar (P1 ≤ 50 bar) 10 - to 10 bar 20 - to 20 bar 50 - to 50 bar 100 - to 100 bar 200 - to 200 bar

Type of gas Please specify type of gas (for selection of valve seat materials)

Ordering example: PM51-2-300-10-CE6-CE6-N2

1

2

Spectron Gas Control Systems GmbH Data sheet DES PM51-2 Edition 1115 Fritz-Klatte-Str. 8, D-65933 Frankfurt Subject to alteration without prior notice Tel.: |+49 38016-0, Fax: +49itec@itec.as (0)69 38016-200 © Spectron Gas ControlAdr.: Systems GmbH 80, N-3261Larvik Hegdalveien Tlf.:(0)69 95 800 700 | e-mail: | Web: www.itec.as info@spectron.de www.spectron.de

| 37

PANELREGULATOR PM51-4

Panel regulator PM51-4

spectro lab

Example: PM51 panel mounted

Panel regulator PM51-4

Product features • Brass (chrome plated) panel pressure regulator for panel and panel surface mounting • For non-corrosive gases and gas mixtures up to quality 6.0 • 4 ports for flexible and individual configuration • Very stable outlet pressure • Suitable for inlet pressures up to 300 bar • Max. outlet pressures 1,5 up to 200 bar * • Metal-to-metal seal to atmosphere • Suitable for ECD-applications • Pressure regulator can be evacuated • Inlet filter • Approved for use with oxygen • Simple outlet pressure limitation by handwheel • Easy to install • New laboratory-style design • Ergonomically designed

Technical data Type Inlet pressure P1 Outlet pressure P2

single-stage max. 300 bar 1,5 / 4 bar (P1 ≤ 50 bar) 10 / 20 / 50 / 100 / 200 bar (P1 > 50 bar)

Materials Body regulator, relief valve: chrome plated brass Valve seat: PA Diaphragm: Hastelloy C276 Filter: Sintered SS 316L 1/4” NPT-F In- and outlets -30oC to +60oC Temperature range Leak rate (to atmosphere) 1x10-8 mbar I/s He (via seat) 1x10-6 mbar I/s He Safety pressure gauges Pressure gauge ISO5171/Cl1.6/NG50 CV=0.15 Flow capacitiy 1.0 kg Weight

* 1,5 / 4 bar only for inlet pressure ≤ 50 bar

Dimensions PM51-4

Side view

ca. 119 50

Bore template for panel mounting

Ø 50

112

23,5

41

Fixing holes for panel surface mounting

) (M6

33 Data sheet DES PM51-4 Edition 1115 Subject to alteration without prior notice © Spectron Gas Control Systems GmbH

38 | iTec AS

Spectron Gas Control Systems GmbH Fritz-Klatte-Str. 8, D-65933 Frankfurt Tel.: +49 (0)69 38016-0, Fax: +49 (0)69 38016-200 info@spectron.de www.spectron.de

PANELREGULATOR PM51-4

Panel regulator PM51-4 Ordering information: Panel regulator PM51-4

spectro lab

In- / outlets CM CM CE CE B A K M 0

2

1/4 - 1/8” / 1/4” / 1/2” - OD compression fitting (brass) 6 - 3 / 6 / 8 / 10 / 12 mm compression fitting (brass) 1/4 - 1/8” / 1/4” / 1/2” - OD compression fitting (stainless steel) 6 - 3 / 6 / 8 / 10 / 12 mm compression fitting (stainless steel) - plug - relief valve - 1/4”-NPT-F (P2≤100 bar) - contact gauge - pressure gauge - 1/4”-NPT-F (port only)

P2

P1

1

3 port selection

4

PM51 - 4 - 300 - 10 - 1 - 2 - 3 - 4 - N2

Outlet pressure P2

Inlet L R

- left - right

Inlet pressure P1 10 - max. 10 bar 20 - max. 20 bar 50 - max. 50 bar

100 - max. 100 bar 200 - max. 200 bar 300 - max. 300 bar

1,5 - to 1,5 bar (P1 ≤ 50 bar) 4 - to 4 bar (P1 ≤ 50 bar) 10 - to 10 bar 20 - to 20 bar 50 - to 50 bar 100 - to 100 bar 200 - to 200 bar

Type of gas Please specify type of gas (for selection of valve seat materials)

Ordering example: PM51-4-300-10-CE6-M-CE6-B-N2

2

1

3

4 Spectron Gas Control Systems GmbH Data sheet DES PM51-4 Edition 1115 Fritz-Klatte-Str. 8, D-65933 Frankfurt Subject to alteration without prior notice Tel.: |+49 38016-0, Fax: +49itec@itec.as (0)69 38016-200 © Spectron Gas ControlAdr.: Systems GmbH 80, N-3261Larvik Hegdalveien Tlf.:(0)69 95 800 700 | e-mail: | Web: www.itec.as info@spectron.de www.spectron.de

| 39

PANELREGULATOR PM51-6

Panel regulator PM51-6

spectro lab

Example: PM51 panel mounted

Panel regulator PM51-6

Product features • Brass (chrome plated) panel pressure regulator for panel and panel surface mounting • For non-corrosive gases and gas mixtures up to quality 6.0 • 6 ports for flexible and individual configuration • Extremly stable outlet pressure • Suitable for inlet pressures up to 300 bar • Max. outlet pressures 1,5 up to 200 bar * • Metal-to-metal seal to atmosphere • Suitable for ECD-applications • Pressure regulator can be evacuated • Inlet filter • Approved for use with oxygen • Simple outlet pressure limitation by handwheel • Easy to install • New laboratory-style design • Ergonomically designed

Technical data Type Inlet pressure P1 Outlet pressure P2

Materials Body regulator, relief valve: Valve seat: Diaphragm: Filter: In- and outlets Temperature range Leak rate (to atmosphere) (via seat) Pressure gauge Flow capacitiy Weight

single-stage max. 300 bar 1,5 / 4 bar (P1 ≤ 50 bar) 10 / 20 / 50 / 100 / 200 bar (P1 > 50 bar) chrome plated brass PA Hastelloy C276 Sintered SS 316L 1/4” NPT-F -30oC to +60oC 1x10-8 mbar I/s He 1x10-6 mbar I/s He Safety pressure gauges ISO5171/Cl1.6/NG50 CV=0.15 1.1 kg

* 1,5 / 4 bar only for inlet pressure ≤ 50 bar

Dimensions PM51-6

Side view

approx. 119 110

Bore template for panel mounting

41

Ø 50

104

23,5

Fixing holes for panel surface mounting

) (M6

33 Data sheet DES PM51-6 Edition 1115 Subject to alteration without prior notice © Spectron Gas Control Systems GmbH

40 | iTec AS

Spectron Gas Control Systems GmbH Fritz-Klatte-Str. 8, D-65933 Frankfurt Tel.: +49 (0)69 38016-0, Fax: +49 (0)69 38016-200 info@spectron.de www.spectron.de

PANELREGULATOR PM51-6

Panel regulator PM51-6

spectro lab

Ordering information: Panel regulator PM51-6

In- / outlets CM CM CE CE B A K M 0

3

2 P1

1/4 - 1/8” / 1/4” / 1/2” - OD compression fitting (brass) 6 - 3 / 6 / 8 / 10 / 12 mm compression fitting (brass) 1/4 - 1/8” / 1/4” / 1/2” -OD compression fitting (stainless steel) 6 - 3 / 6 / 8 / 10 / 12 mm compression fitting (stainless steel) - plug - relief valve - 1/4”-NPT-F (P2≤100 bar) - contact gauge - pressure gauge 3 2 - 1/4”-NPT-F (port only)

P2

1

P1

P2

1

4

4 port selection 6

5

6

5

Inlet left: L

Inlet right: R

PM51 - 6 - L - 300 - 20 - 1 - 2 - 3 - 4 - 5 - 6 - N2 Inlet

Outlet pressure P2

Type of gas

L R

1,5 - to 1,5 bar (P1 ≤ 50 bar) 4 - to 4 bar (P1 ≤ 50 bar) 10 - to 10 bar 20 - to 20 bar 50 - to 50 bar 100 - to 100 bar 200 - to 200 bar

Please specify type of gas (for selection of valve seat materials)

- left - right

Inlet pressure P1 10 - max. 10 bar 20 - max. 20 bar 50 - max. 50 bar

100 - max. 100 bar 200 - max. 200 bar 300 - max. 300 bar

Ordering example: PM51-6-L-20-10-CE6-M-M-CE6-B-0-N2

2

Ordering example: PM51-6-R-200-10-0-M-M-CE1/8-A-B-Ar

1

2

3

3

4

4

1

5 6

6 5

Spectron Gas Control Systems GmbH Data sheet DES PM51-6 Edition 1115 Fritz-Klatte-Str. 8, D-65933 Frankfurt Subject to alteration without prior notice Tel.: |+49 38016-0, Fax: +49itec@itec.as (0)69 38016-200 © Spectron Gas ControlAdr.: Systems GmbH 80, N-3261Larvik Hegdalveien Tlf.:(0)69 95 800 700 | e-mail: | Web: www.itec.as info@spectron.de www.spectron.de

| 41

PANELREGULATOR PM52exact-2

Panel regulator PM52exact-2

Panel regulator PM52

spectro lab

Example: exact PM52 panel mounted

exact

-2

Product features • Brass (chrome plated) panel pressure regulator for panel and panel surface mounting • Extremly stable outlet pressure by applied extremly accurate Technology "exact" and anti- vibration device • For non-corrosive gases and gas mixtures up to quality 6.0 • 2 ports for flexible and individual configuration • Suitable for inlet pressures up to 300 bar • Max. outlet pressures 1.5 up to 20 bar • Light weight • Compact design • Metal-to-metal seal to atmosphere • Suitable for ECD-applications • Pressure regulator can be evacuated • Central filter • Approved for use with oxygen • Simple outlet pressure limitation by handwheel • Easy to install • New laboratory-style design • Ergonomically designed

Technical data single-stage EXACT Type max. 300 bar Inlet pressure P1 1.5 / 4 / 10 / 20 bar Outlet pressure P2 Materials Body regulator: chrome plated brass Valve seat: PA Diaphragm: Hastelloy C276 Soft goods: EPDM Filter: Sintered SS 316L 1/4” NPT female In- and outlets -30oC to +60oC Temperature range Leak rate (to atmosphere) 1x10-8 mbar I/s He (via seat) 1x10-6 mbar I/s He CV=0.16 Flow capacitiy 1.0 kg Weight

exact = extremly accurate technology Side view

50

exact

Bore template for panel mounting

ca. 119

41

23,5

Ø 50

Dimensions exact PM52 -2

Fixing holes for panel surface mounting

) (M6

33 Data sheet DES PM52-2 Edition 0217 Subject to alteration without prior notice © Spectron Gas Control Systems GmbH

42 | iTec AS

Spectron Gas Control Systems GmbH Fritz-Klatte-Str. 8, D-65933 Frankfurt Tel.: +49 (0)69 38016-0, Fax: +49 (0)69 38016-200 info@spectron.de www.spectron.de

PANELREGULATOR PM52exact-2

Panel regulator PM52exact-2

spectro lab

Ordering information: exact Panel regulator PM52 -2

In- / outlets CM CM CE CE 0

1/4 - 1/8” / 1/4” / 1/2” - OD compression fitting (brass) 6 - 3 / 6 / 8 / 10 / 12 mm compression fitting (brass) 1/4 - 1/8” / 1/4” / 1/2” - OD compression fitting (stainless steel) 6 - 3 / 6 / 8 / 10 / 12 mm compression fitting (stainless steel) - 1/4”-NPT-F (port only)

P2

P1

2

1

port selection

PM52 - 2 - 300 - 10 - 1 - 2 - N2 Type of gas Inlet pressure P1

Outlet pressure P2

100 - max. 100 bar 200 - max. 200 bar 300 - max. 300 bar

1,5- to 1.5 bar 4 - to 4 bar 10 - to 10 bar 20 - to 20 bar

Please specify type of gas (for selection of valve seat materials)

For inlet pressure up to 50 bar and outlet pressure of max. 1,5 or 4 bar please use M51

Ordering example: PM52-2-300-10-CE6-CE6-N2

1

2

Specifications • SPECTROLAB-components guarantee maximum quality by using high grade materials and a quality assurance program acc. to ISO 9001.

• All parts in the gas wetted surface area are cleaned in an ultrasonic cleaning system (CFCfree) with the special Cleaning process ® SPECTRO-CLEAN and then baked out.

• SPECTROLAB-components undergo a 100% function- and Helium-leak-test.

Spectron Gas Control Systems GmbH Data sheet DES PM52-2 Edition 0217 Fritz-Klatte-Str. 8, D-65933 Frankfurt Subject to alteration without prior notice Tel.: |+49 38016-0, Fax: +49itec@itec.as (0)69 38016-200 © Spectron Gas ControlAdr.: Systems GmbH 80, N-3261Larvik Hegdalveien Tlf.:(0)69 95 800 700 | e-mail: | Web: www.itec.as info@spectron.de www.spectron.de

| 43

PANELREGULATOR PM52exact-4

Panel regulator PM52exact-4

spectro lab

Example: exact PM52 panel mounted

Panel regulator exact PM52 -4

Product features • Brass (chrome plated) panel pressure regulator for panel and panel surface mounting • Extremly stable outlet pressure by applied extremly accurate Technology "exact" and anti- vibration device • For non-corrosive gases and gas mixtures up to quality 6.0 • 4 ports for flexible and individual configuration • Suitable for inlet pressures up to 300 bar • Max. outlet pressures 1.5 up to 20 bar • Light weight • Compact design • Metal-to-metal seal to atmosphere • Suitable for ECD-applications • Pressure regulator can be evacuated • Central filter • Approved for use with oxygen • Simple outlet pressure limitation by handwheel • Easy to install • New laboratory-style design • Ergonomically designed

Technical data Type single-stage EXACT Inlet pressure P1 max. 300 bar 1.5 / 4 / 10 / 20 bar Outlet pressure P2 Materials Body regulator, relief valve: chrome plated brass Valve seat: PA Diaphragm: Hastelloy C276 Soft goods: EPDM Filter: Sintered SS 316L 1/4” NPT female In- and outlets -30oC to +60oC Temperature range Leak rate (to atmosphere) 1x10-8 mbar I/s He (via seat) 1x10-6 mbar I/s He Safety pressure gauges Pressure gauge ISO5171/Kl1.6/NG50 CV=0.16 Flow capacitiy 1.0 kg Weight

exact = extremly accurate technology Dimensions exact PM52 -4

Side view

ca. 119 50

Bore template for panel mounting

exact

Ø 50

112

23,5

41

Fixing holes for panel surface mounting

) (M6

33 Data sheet DES PM52-4 Edition 0217 Subject to alteration without prior notice © Spectron Gas Control Systems GmbH

44 | iTec AS

Spectron Gas Control Systems GmbH Fritz-Klatte-Str. 8, D-65933 Frankfurt Tel.: +49 (0)69 38016-0, Fax: +49 (0)69 38016-200 info@spectron.de www.spectron.de

PANELREGULATOR PM52exact-4

Panel regulator PM52exact-4 Ordering information: exact Panel regulator PM52 -4

In- / outlets CM CM CE CE B A K M 0

2

spectro lab

1/4 - 1/8” / 1/4” / 1/2” - OD compression fitting (brass) 6 - 3 / 6 / 8 / 10 / 12 mm compression fitting (brass) 1/4 - 1/8” / 1/4” / 1/2” - OD compression fitting (stainless steel) 6 - 3 / 6 / 8 / 10 / 12 mm compression fitting (stainless steel) - plug - relief valve - 1/4”-NPT-F - contact gauge - pressure gauge - 1/4”-NPT-F (port only)

P2

P1

1

3 port selection 4

PM52 - 4 - 300 - 10 - 1 - 2 - 3 - 4 - N2

Inlet pressure P1

Outlet pressure P2

Type of gas

100 - max. 100 bar 200 - max. 200 bar 300 - max. 300 bar

1,5- to 1.5 bar 4 - to 4 bar 10 - to 10 bar 20 - to 20 bar

Please specify type of gas (for selection of valve seat materials)

For inlet pressure up to 50 bar and outlet pressure of max. 1,5 or 4 bar please use M51

Ordering example: PM52-4-300-10-CE6-M-CE6-B-N2

Specifications • SPECTROLAB-components guarantee maximum quality by using high grade materials and a quality assurance program acc. to ISO 9001.

• All parts in the gas wetted surface area are cleaned in an ultrasonic cleaning system (CFCfree) with the special Cleaning process ® SPECTRO-CLEAN and then baked out.

• SPECTROLAB-components undergo a 100% function- and Helium-leak-test.

2

1

3

4 Spectron Gas Control Systems GmbH Data sheet DES PM52-4 Edition 0217 Fritz-Klatte-Str. 8, D-65933 Frankfurt Subject to alteration without prior notice Tel.: |+49 38016-0, Fax: +49itec@itec.as (0)69 38016-200 © Spectron Gas ControlAdr.: Systems GmbH 80, N-3261Larvik Hegdalveien Tlf.:(0)69 95 800 700 | e-mail: | Web: www.itec.as info@spectron.de www.spectron.de

| 45

PANELREGULATOR PM52exact-6

Panel regulator PM52exact-6

spectro lab

Example: exact PM52 panel mounted

Panel regulator exact PM52 -6

Product features • Brass (chrome plated) panel pressure regulator for panel and panel surface mounting • Extremly stable outlet pressure by applied extremly accurate Technology "exact" and anti- vibration device • For non-corrosive gases and gas mixtures up to quality 6.0 • 6 ports for flexible and individual configuration • Suitable for inlet pressures up to 300 bar • Max. outlet pressures 1.5 up to 20 bar • Light weight • Compact design • Metal-to-metal seal to atmosphere • Suitable for ECD-applications • Pressure regulator can be evacuated • Central filter • Approved for use with oxygen • Simple outlet pressure limitation by handwheel • Easy to install • New laboratory-style design • Ergonomically designed

Technical data single-stage EXACT Type Inlet pressure P1 max. 300 bar Outlet pressure P2 1.5 / 4 / 10 / 20 bar Materials Body regulator, relief valve: chrome plated brass Valve seat: PA Diaphragm: Hastelloy C276 Soft goods: EPDM Filter: Sintered SS 316L 1/4” NPT female In- and outlets -30oC to +60oC Temperature range Leak rate (to atmosphere) 1x10-8 mbar I/s He (via seat) 1x10-6 mbar I/s He Safety pressure gauges Pressure gauge ISO5171/Kl1.6/NG50 CV=0.16 Flow capacitiy 1.1 kg Weight

exact = extremly accurate technology Dimensions exact PM52 -6

Side view

ca. 119 23,5

Bore template for panel mounting

41

exact

Ø 50

104

110

Fixing holes for panel surface mounting

) (M6

33 Data sheet DES PM52-6 Edition 0217 Subject to alteration without prior notice © Spectron Gas Control Systems GmbH

46 | iTec AS

Spectron Gas Control Systems GmbH Fritz-Klatte-Str. 8, D-65933 Frankfurt Tel.: +49 (0)69 38016-0, Fax: +49 (0)69 38016-200 info@spectron.de www.spectron.de

PANELREGULATOR PM52exact-6

Panel regulator PM52exact-6

spectro lab

Ordering information: exact Panel regulator PM52 -6

In- / outlets CM CM CE CE B A K M 0

3

2 P1

1/4 - 1/8” / 1/4” / 1/2” - OD compression fitting (brass) 6 - 3 / 6 / 8 / 10 / 12 mm compression fitting (brass) 1/4 - 1/8” / 1/4” / 1/2” - OD compression fitting (stainless steel) 6 - 3 / 6 / 8 / 10 / 12 mm compression fitting (stainless steel) - plug - relief valve - 1/4”-NPT-F - contact gauge - pressure gauge 3 2 - 1/4”-NPT-F (port only)

P2

1

P1

P2

1

4

4 port selection 6

5

6

5

Inlet left: L

Inlet right: R

PM52 - 6 - L - 300 - 20 - 1 - 2 - 3 - 4 - 5 - 6 - N2 Inlet L R

- left - right

Inlet pressure P1

Outlet pressure P2

Type of gas

1,5- to 1.5 bar 4 - to 4 bar 10 - to 10 bar 20 - to 20 bar

Please specify type of gas (for selection of valve seat materials)

100 - max. 100 bar 200 - max. 200 bar 300 - max. 300 bar For inlet pressure up to 50 bar and outlet pressure of max. 1,5 or 4 bar please use M51

Ordering example: PM52-6-L-20-10-CE6-M-M-CE6-A-B-N2

2

Ordering example: PM52-6-R-200-10-0-M-M-CE1/8-A-B-Ar 2

3

3

1 4

1

4

5

6

6 5

Spectron Gas Control Systems GmbH Data sheet DES PM52-6 Edition 0217 Fritz-Klatte-Str. 8, D-65933 Frankfurt Subject to alteration without prior notice Tel.: |+49 38016-0, Fax: +49itec@itec.as (0)69 38016-200 © Spectron Gas ControlAdr.: Systems GmbH 80, N-3261Larvik Hegdalveien Tlf.:(0)69 95 800 700 | e-mail: | Web: www.itec.as info@spectron.de www.spectron.de

| 47

PANELREGULATOR PM53-2

Panel pressure regulator PM53-2

spectro lab

Panel pressure regulator PM53-2

Product features

Technical data double-stage Type max. 300 bar Inlet pressure P1 1.5 / 4 / 10 / 20 bar Outlet pressure P2 Materials Body regulator, relief valve: chrome plated brass Valve seat: PA Diaphragm: Hastelloy C276 Soft goods: EPDM Filter: Sintered bronze 1/4” NPT-F In- and outlets -30oC to +60oC Temperature range Leak rate (to atmosphere) 1x10-8 mbar I/s He (via seat) 1x10-6 mbar I/s He 1.6 kg Weight

• 2-stage diaphragm panel pressure regulator with extremly stable outlet pressure and anti-vibration device • For non-corrosive gases and gas mixtures up to quality 6.0 • 2 ports for flexible and individual configuration • New laboratory-style design • Central filter • Suitable for ECD-applications • Pressure regulator can be evacuated • Suitable for inlet pressures up to 300 bar • Max. outlet pressures 1.5 up to 20 bar • Light weight • Compact design • Approved for use with oxygen • Simple outlet pressure limitation by handwheel • Easy to install

Outlet pressure P2 [bar]

Flow curves PM53 10

Inlet pressure P1 = 21 bar

8 6 4 2 0

0,2 0,3

0,5

Data sheet DES PM53-2 Edition 1115 Subject to alteration without prior notice © Spectron Gas Control Systems GmbH

48 | iTec AS

1

2

3

4

5

10

20

Spectron Gas Control Systems GmbH Fritz-Klatte-Str. 8, D-65933 Frankfurt Tel.: +49 (0)69 38016-0, Fax: +49 (0)69 38016-200 info@spectron.de www.spectron.de

30

Flow rate 3 Q [m /h air]

PANELREGULATOR PM53-2

Panel pressure regulator PM53-2

spectro lab

Dimensions Bore template for panel mounting

157 41

115

Ø 50

50

42

90,5

24,5

Ordering information: Panel pressure regulator PM53

In- / outlets CM CM CE CE 0

P1

1/4 - 1/8” / 1/4” / 1/2” - OD compression fitting (brass) 6 - 3 / 6 / 8 / 10 / 12 mm compression fitting (brass) 1/4 - 1/8” / 1/4” / ½” - OD compression fitting (stainless steel) 6 - 3 / 6 / 8 / 10 / 12 mm compression fitting (stainless steel) - 1/4” NPT-F (port only)

P2

1

2 port selection

PM53 - 2 - 300 - 20 - 1 - 2 - N2 Inlet pressure P1

Outlet pressure P2

Type of gas

100 - max. 100 bar 200 - max. 200 bar 300 - max. 300 bar

1,5 - to 1.5 bar 4 - to 4 bar 10 - to 10 bar 20 - to 20 bar

Please specify type of gas (for selection of valve seat materials)

For inlet pressure up to 50 bar and outlet pressure of max. 1,5 or 4 bar please use M51 Spectron Gas Control Systems GmbH Data sheet DES PM53-2 Edition 1115 Fritz-Klatte-Str. 8, D-65933 Frankfurt Subject to alteration without prior notice Tel.:| Tlf.: +49 (0)69 38016-0, Fax: +49 (0)69 38016-200 © Spectron Gas ControlAdr.: Systems GmbH 80, N-3261Larvik Hegdalveien 95 800 700 | e-mail: itec@itec.as | Web: www.itec.as info@spectron.de www.spectron.de

| 49

PANELREGULATOR PM53-6

Panel pressure regulator PM53-6

spectro lab

Panel pressure regulator PM53-6

Product features

Technical data Type double-stage Inlet pressure P1 max. 300 bar Outlet pressure P2 1.5 / 4 / 10 / 20 bar Materials Body regulator, relief valve: chrome plated brass Valve seat: PA Diaphragm: Hastelloy C276 Soft goods: EPDM Filter: Sintered bronze 1/4” NPT-F In- and outlets -30oC to +60oC Temperature range Leak rate (to atmosphere) 1x10-8 mbar I/s He (via seat) 1x10-6 mbar I/s He Safety pressure gauges Pressure gauge ISO5171/Kl1.6/NG50 1.7 kg Weight

• 2-stage diaphragm panel pressure regulator with extremly stable outlet pressure and anti-vibration device • For non-corrosive gases and gas mixtures up to quality 6.0 • 6 ports for flexible and individual configuration • New laboratory-style design • Central filter • Suitable for ECD-applications • Pressure regulator can be evacuated • Suitable for inlet pressures up to 300 bar • Max. outlet pressures 1.5 up to 20 bar • Light weight • Compact design • Approved for use with oxygen • Simple outlet pressure limitation by handwheel • Easy to install

Outlet pressure P2 [bar]

Flow curves PM53 10

Inlet pressure P1 = 21 bar

8 6 4 2 0

0,2 0,3

0,5

Data sheet DES PM53-6 Edition 1115 Subject to alteration without prior notice © Spectron Gas Control Systems GmbH

50 | iTec AS

1

2

3

4

5

10

20

Spectron Gas Control Systems GmbH Fritz-Klatte-Str. 8, D-65933 Frankfurt Tel.: +49 (0)69 38016-0, Fax: +49 (0)69 38016-200 info@spectron.de www.spectron.de

30

Flow rate 3 Q [m /h air]

PANELREGULATOR PM53-6

spectro lab

Panel pressure regulator PM53-6 Dimensions 110

157 115

77

Bore template for panel mounting

55

Ø 50

41

42

24,5

90,5

Ordering information: Panel pressure regulator PM53

In- / outlets CM CM CE CE B A K M 0

3

2 P1

1/4 - 1/8” / 1/4” / 1/2” - OD compression fitting (brass) 6 - 3 / 6 / 8 / 10 / 12 mm compression fitting (brass) 1/4 - 1/8” / 1/4” / ½” - OD compression fitting (stainless steel) 6 - 3 / 6 / 8 / 10 / 12 mm compression fitting (stainless steel) - plug - relief valve - 1/4” NPT-F - contact gauge - pressure gauge 3 2 - 1/4” NPT-F (port only)

P2

1

P1

P2

1

4

4 port selection 6

5

5

Inlet left: L

6

Inlet right: R

PM53 - L - 300 - 20 - 1 - 2 - 3 - 4 - 5 - 6 - N2 Inlet

Outlet pressure P2

Type of gas

L R

1,5 - to 1.5 bar 4 - to 4 bar 10 - to 10 bar 20 - to 20 bar

Please specify type of gas (for selection of valve seat materials)

- left - right

Inlet pressure P1 100 - max. 100 bar 200 - max. 200 bar 300 - max. 300 bar

For inlet pressure up to 50 bar and outlet pressure of max. 1,5 or 4 bar please use M51

Spectron Gas Control Systems GmbH Data sheet DES PM53-6 Edition 1115 Fritz-Klatte-Str. 8, D-65933 Frankfurt Subject to alteration without prior notice Tel.:| Tlf.: +49 (0)69 38016-0, Fax: +49 (0)69 38016-200 © Spectron Gas ControlAdr.: Systems GmbH 80, N-3261Larvik Hegdalveien 95 800 700 | e-mail: itec@itec.as | Web: www.itec.as info@spectron.de www.spectron.de

| 51

GASSENTRAL BM55-1

Pressure control panel BM55-1

spectro lab relief valve

Pressure control panel BM55-1 with valve in the outlet adapter

Product features • • • • • • • • • •

• • • • •

Technical data Type Wall- and cabinet-mounting pressure control panels Inlet pressure P1 For non-corrosive gases up to quality 6.0 Outlet pressure P2 Laboratory-style design Materials Ergonomically designed Body regulator Modular design (to be extended to 2, 3 etc. cylinders) and valves: Filter at the process gas inlet valve Valve seat regulator: Diaphragm-type shut-off valves optimised for low Valve seat valves: internal volume with On/Off position indicator Diaphragm regulator: Diaphragm valve: Suitable for ECD-applications Diaphragm-type pressure regulator with high control Soft goods: Filter: accuracy and anti-vibration device Inlet connector Outlet adapter with integrated relief valve and optional diaphragm-shut-off valve (this prevents the Temperature range outlet piping from draining during disconnecting the Leak rate (to atmosphere) panel) (via seat) Designed for easy installation Pressure gauges Approved for use with oxygen Suitable for inlet pressure values up to 300 bar Weight Compact design especially for installation into safety cabinets for gas cylinders Dual-stage model: BM56-1

single-stage max. 300 bar 10/20/50/100/200 bar

chrome-plated brass PA 11 PVDF Hastelloy C276 Hastelloy C276 EPDM, FKM Sintered SS 316L SS compression ring fitting 6x1 mm -30oC to +60oC 1x10-8mbar I/s He 1x10-6mbar I/s He Safety pressure gauges ISO5171/cl 1.6/NG50 4,5 kg

Outlet pressure P2 [bar]

Flow curves BM55-1 10

Inlet pressure P1 = 21 bar

8 6 4 2 0

0,2 0,3

0,5

1

2

3

4

5

10

20

30

Flow rate 3 Q [m /h air]

Spectron Gas Control Systems GmbH Data sheet DES BM55-1 Edition 0214 Fritz-Klatte-Str. 8, D-65933 Frankfurt Subject to alteration without prior notice Tel.: |+49 38016-0, Fax: +49itec@itec.as (0)69 38016-200 © Spectron Gas ControlAdr.: Systems GmbH 80, N-3261Larvik Hegdalveien Tlf.:(0)69 95 800 700 | e-mail: | Web: www.itec.as info@spectron.de www.spectron.de

| 53

GASSENTRAL BM55-1

Pressure control panel BM55-1 104

26

1/4”-NPT

172 (175 incl. plugs)

1/4”-NPT

spectro lab

36

58

Inlet ø 6mm pipe

Process gas valve also with 300 bar pneumatic-actuator upon request!

225 (231 incl. plugs)

Ordering information: Pressure control panels BM55-1

BM55 - 1 - 300 - 10 - M - M - V - N2

Inlet pressure P1

Gas type

100 - max. 100 bar 200 - max. 200 bar 300 - max. 300 bar

Please specify gas type with your order (selection of valve seat material)

Outlet pressure P2

Outlet adapter

10 - max. 10 bar 20 - max. 20 bar 50 - max. 50 bar 100 - max. 100 bar 200 - max. 200 bar

0 - without valve V - valve (manual) VP - pneumatic-valve

Inlet press. indication

Outlet press. indication

M K

M K

- pressure gauge - contact pressure gauge

Specifications • SPECTROLAB - components guarantee maximum quality by using high grade materials and a quality assurance program acc. to ISO 9001.

• All components which come into contact with the medium are cleaned in an ultrasonic cleaning system (CFC-free) with the special cleaning ® process SPECTRO-CLEAN and are then baked out.

• SPECTROLAB - components undergo a 100% Helium-leak-test.

Data sheet DES BM55-1 Edition 0214 Subject to alteration without prior notice © Spectron Gas Control Systems GmbH

54 | iTec AS

ca. 157

- pressure gauge - contact pressure gauge

Pressure indication • All pressure reguators can be equipped with pressure gauges or contact gauges for in- and outlet pressure indication.

Important note regarding component selection • In order to assure safe operation it is essential to take the configuration of the whole system into account when selecting a control panel.

• The function of the components, the compatibility of the materials, correlating temperature ranges, correct installation, operation and maintenance in accordance with the relevant regulations are the responsibility of the system designer and the user.

Spectron Gas Control Systems GmbH Fritz-Klatte-Str. 8, D-65933 Frankfurt Tel.: +49 (0)69 38016-0, Fax: +49 (0)69 38016-200 info@spectron.de www.spectron.de

GASSENTRAL BM55-2

Pressure control panel BM55-2

spectro lab relief valve

Pressure control panel BM55-2 Outlet adapter without valve

Product features • • • • • • • • • •

• • • • •

Technical data Type Wall- and cabinet-mounting pressure control panels Inlet pressure P1 For non-corrosive gases up to quality 6.0 Outlet pressure P2 Laboratory-style design Materials Ergonomically designed Body regulator Modular design (to be extended to 2, 3 etc. cylinders) and valves: Filter at the process gas inlet valve Valve seat regulator: Diaphragm-type shut-off valves optimised for low Valve seat valves: internal volume with On/Off position indicator Diaphragm regulator: Diaphragm valve: Suitable for ECD-applications Diaphragm-type pressure regulator with high control Soft goods: Filter: accuracy and anti-vibration device Inlet connector Outlet adapter with integrated relief valve and optional diaphragm-shut-off valve (this prevents the Temperature range outlet piping from draining during disconnecting the Leak rate (to atmosphere) panel) (via seat) Designed for easy installation Pressure gauges Approved for use with oxygen Suitable for inlet pressure values up to 300 bar Weight Compact design especially for installation into safety cabinets for gas cylinders Double-stage model: BM56-2

single-stage max. 300 bar 10/20/50/100/200 bar

chrome-plated brass PA 11 PVDF Hastelloy C276 Hastelloy C276 EPDM, FKM Sintered SS 316L SS compression ring fitting 6x1 mm -30oC to +60oC 1x10-8 mbar I/s He 1x10-6 mbar I/s He Safety pressure gauges ISO5171/cl 1.6/NG50 6 kg

Outlet pressure P2 [bar]

Flow curves BM55-2 10

Inlet pressure P1 = 21 bar

8 6 4 2 0

0,2 0,3

0,5

1

2

3

4

5

10

20

30

Flow rate 3 Q [m /h air]

Spectron Gas Control Systems GmbH Data sheet DES BM55-2 Edition 1112 Fritz-Klatte-Str. 8, D-65933 Frankfurt Subject to alteration without prior notice Tel.: |+49 38016-0, Fax: +49 (0)69 38016-200 © Spectron Gas ControlAdr.: Systems GmbH 80, N-3261Larvik Hegdalveien Tlf.:(0)69 95 800 700 | e-mail: itec@itec.as | Web: www.itec.as info@spectron.de www.spectron.de

| 55

GASSENTRAL BM55-2

Pressure control panel BM55-2 104

26

104

1/4”-NPT

172 (incl. plugs: 175)

1/4”-NPT

spectro lab

Inlet ø 6mm pipe 36

36

58

ca. 157

300 (incl. plugs: 306)

Process gas valve also with 300 bar pneumatic-actuator upon request!

Ordering information: Pressure control panels BM55-2

BM55 - 2 - 300 - 10 - M - M - V - N2

Inlet pressure P1

Gas type

100 - max. 100 bar 200 - max. 200 bar 300 - max. 300 bar

Please specify gas type with your order (selection of valve seat material)

Outlet pressure P2

Outlet adapter

10 - max. 10 bar 20 - max. 20 bar 50 - max. 50 bar 100 - max. 100 bar 200 - max. 200 bar

0 - without valve V - valve (manual) VP - pneumatic-valve

Inlet press. indication

Outlet press. indication

M K

M K

- pressure gauge - contact pressure gauge

Specifications • SPECTROLAB - components guarantee maximum quality by using high grade materials and a quality assurance program acc. to ISO 9001.

• All components which come into contact with the medium are cleaned in an ultrasonic cleaning system (CFC-free) with the special cleaning ® process SPECTRO-CLEAN and are then baked out.

• SPECTROLAB - components undergo a 100% Helium-leak-test.

Data sheet DES BM55-2 Edition 1112 Subject to alteration without prior notice © Spectron Gas Control Systems GmbH

56 | iTec AS

- pressure gauge - contact pressure gauge

Pressure indication • All pressure reguators can be equipped with pressure gauges or contact gauges for in- and outlet pressure indication.

Important note regarding component selection • In order to assure safe operation it is essential to take the configuration of the whole system into account when selecting a control panel.

• The function of the components, the compatibility of the materials, correlating temperature ranges, correct installation, operation and maintenance in accordance with the relevant regulations are the responsibility of the system designer and the user.

Spectron Gas Control Systems GmbH Fritz-Klatte-Str. 8, D-65933 Frankfurt Tel.: +49 (0)69 38016-0, Fax: +49 (0)69 38016-200 info@spectron.de www.spectron.de

GASSENTRAL BM56-1

Pressure control panel BM56-1

spectro lab relief valve

Pressure control panel BM56-1 with valve in the outlet adapter

Product features • • • • • • • • •

• • • • •

Technical data Type Double-stage wall- and cabinet-mounting pressure Inlet pressure P1 control panels Outlet pressure P2 For non-corrosive gases up to quality 6.0 Materials Laboratory-style design Body regulator Modular design (to be extended to 2, 3 etc. cylinders) and valves: Filter at the process gas inlet valve Valve seat regulator: Diaphragm-type shut-off valves optimised for low Valve seat valves: internal volume with On/Off position indicator Diaphragm regulator: Suitable for ECD-applications Diaphragm valve: Double-stage diaphragm-type pressure regulator with Soft goods: Filter: high control accuracy and anti-vibration device Inlet connector Outlet adapter with integrated relief valve and optional diaphragm-shut-off valve (this prevents the Temperature range outlet piping from draining during disconnecting the Leak rate (to atmosphere) panel) (via seat) Designed for easy installation Pressure gauges Approved for use with oxygen Suitable for inlet pressure values up to 300 bar Weight Compact design especially for installation into safety cabinets for gas cylinders Single-stage model: BM55-1

double-stage max. 300 bar 1,5 / 4 / 10 bar

chrome-plated brass PA PVDF Hastelloy C276 Hastelloy C276 EPDM, FKM Sintered bronze B60 SS compression ring fitting 6x1 mm -30oC to +60oC 1x10-8 mbar I/s He 1x10-6 mbar I/s He Safety pressure gauges ISO5171/cl 1.6/NG50 4,9 kg

Outlet pressure P2 [bar]

Flow curves BM56-1 10

Inlet pressure P1 = 21 bar

8 6 4 2 0

0,2 0,3

0,5

1

2

3

4

5

10

20

30

Flow rate 3 Q [m /h air]

Spectron Gas Control Systems GmbH Data sheet DES BM56-1 Edition 1115 Fritz-Klatte-Str. 8, D-65933 Frankfurt Subject to alteration without prior notice Tel.: |+49 38016-0, Fax: +49itec@itec.as (0)69 38016-200 © Spectron Gas ControlAdr.: Systems GmbH 80, N-3261Larvik Hegdalveien Tlf.:(0)69 95 800 700 | e-mail: | Web: www.itec.as info@spectron.de www.spectron.de

| 57

GASSENTRAL BM56-1

Pressure control panel BM56-1 1/4”-NPT

26

1/4”-NPT

172 (175 incl. plugs)

88,5

spectro lab

Inlet ø 6mm pipe

36

Process gas valve also with 300 bar pneumatic-actuator upon request!

ca. 189

Ordering information: Pressure control panels BM56-1

BM56 - 1 - 300 - 1,5 - M - M - V - N2

Inlet pressure P1

Gas type

100 - max. 100 bar 200 - max. 200 bar 300 - max. 300 bar

Please specify gas type with your order (selection of valve seat material)

Outlet pressure P2

Outlet adapter

1,5 - max. 1,5 bar 4 - max. 4 bar 10 - max. 10 bar

0 - without valve V - valve (manual) VP - pneumatic-valve

Inlet press. indication

Outlet press. indication

M K

M K

- pressure gauge - contact pressure gauge

Specifications • SPECTROLAB - components guarantee maximum quality by using high grade materials and a quality assurance program acc. to ISO 9001.

• All components which come into contact with the medium are cleaned in an ultrasonic cleaning system (CFC-free) with the special cleaning ® process SPECTRO-CLEAN and are then baked out.

• SPECTROLAB - components undergo a 100% Helium-leak-test.

Data sheet DES BM56-1 Edition 1115 Subject to alteration without prior notice © Spectron Gas Control Systems GmbH

58 | iTec AS

76

225 (231 incl. plugs)

- pressure gauge - contact pressure gauge

Pressure indication • All pressure reguators can be equipped with pressure gauges or contact gauges for in- and outlet pressure indication.

Important note regarding component selection • In order to assure safe operation it is essential to take the configuration of the whole system into account when selecting a control panel.

• The function of the components, the compatibility of the materials, correlating temperature ranges, correct installation, operation and maintenance in accordance with the relevant regulations are the responsibility of the system designer and the user.

Spectron Gas Control Systems GmbH Fritz-Klatte-Str. 8, D-65933 Frankfurt Tel.: +49 (0)69 38016-0, Fax: +49 (0)69 38016-200 info@spectron.de www.spectron.de

GASSENTRAL BM56-2

Pressure control panel BM56-2

spectro lab relief valve

Pressure control panel BM56-2 Outlet adapter without valve

Product features • • • • • • • • •

• • • • •

Technical data Type Double-stage wall- and cabinet-mounting pressure Inlet pressure P1 control panels Outlet pressure P2 For non-corrosive gases up to quality 6.0 Materials Laboratory-style design Body regulator Modular design (to be extended to 2, 3 etc. cylinders) and valves: Filter at the process gas inlet valve Valve seat regulator: Diaphragm-type shut-off valves optimised for low Valve seat valves: internal volume with On/Off position indicator Diaphragm regulator: Suitable for ECD-applications Diaphragm valve: Double-stage diaphragm-type pressure regulator with Soft goods: Filter: high control accuracy and anti-vibration device Inlet connector Outlet adapter with integrated relief valve and optional diaphragm-shut-off valve (this prevents the Temperature range outlet piping from draining during disconnecting the Leak rate (to atmosphere) panel) (via seat) Designed for easy installation Pressure gauges Approved for use with oxygen Suitable for inlet pressure values up to 300 bar Weight Compact design especially for installation into safety cabinets for gas cylinders Single-stage model: BM55-2

double-stage max. 300 bar 1,5 / 4 / 10 bar

chrome-plated brass PA PVDF Hastelloy C276 Hastelloy C276 EPDM, FKM Sintered bronze B60 SS compression ring fitting 6x1 mm -30oC to +60oC 1x10-8 mbar I/s He 1x10-6 mbar I/s He Safety pressure gauges ISO5171/cl 1.6/NG50 6,5 kg

Outlet pressure P2 [bar]

Flow curves BM56-2 10

Inlet pressure P1 = 21 bar

8 6 4 2 0

0,2 0,3

0,5

1

2

3

4

5

10

20

30

Flow rate 3 Q [m /h air]

Spectron Gas Control Systems GmbH Data sheet DES BM56-2 Edition 1115 Fritz-Klatte-Str. 8, D-65933 Frankfurt Subject to alteration without prior notice Tel.: +49 38016-0, Fax: +49itec@itec.as (0)69 38016-200 © Spectron Gas ControlAdr.: Systems GmbH 80, N-3261Larvik | Tlf.:(0)69 Hegdalveien 95 800 700 | e-mail: | Web: www.itec.as info@spectron.de www.spectron.de

| 59

GASSENTRAL BM56-2

Pressure control panel BM56-2 104

26

104

1/4”-NPT

172 (incl. plugs: 175)

1/4”-NPT

spectro lab

Inlet ø 6mm pipe 36

36

76

ca. 189

300 (incl. plugs: 306)

Process gas valve also with 300 bar pneumatic-actuator upon request!

Ordering information: Pressure control panels BM56-2

BM56 - 2 - 300 - 1,5 - M - M - V - N2

Inlet pressure P1

Gas type

100 - max. 100 bar 200 - max. 200 bar 300 - max. 300 bar

Please specify gas type with your order (selection of valve seat material)

Outlet pressure P2

Outlet adapter

1,5 - max. 1,5 bar 4 - max. 4 bar 10 - max. 10 bar

0 - without valve V - valve (manual) VP - pneumatic-valve

Inlet press. indication

Outlet press. indication

M K

M K

- pressure gauge - contact pressure gauge

Specifications • SPECTROLAB - components guarantee maximum quality by using high grade materials and a quality assurance program acc. to ISO 9001.

• All components which come into contact with the medium are cleaned in an ultrasonic cleaning system (CFC-free) with the special cleaning ® process SPECTRO-CLEAN and are then baked out.

• SPECTROLAB - components undergo a 100% Helium-leak-test.

Data sheet DES BM56-2 Edition 1115 Subject to alteration without prior notice © Spectron Gas Control Systems GmbH

60 | iTec AS

- pressure gauge - contact pressure gauge

Pressure indication • All pressure reguators can be equipped with pressure gauges or contact gauges for in- and outlet pressure indication.

Important note regarding component selection • In order to assure safe operation it is essential to take the configuration of the whole system into account when selecting a control panel.

• The function of the components, the compatibility of the materials, correlating temperature ranges, correct installation, operation and maintenance in accordance with the relevant regulations are the responsibility of the system designer and the user.

Spectron Gas Control Systems GmbH Fritz-Klatte-Str. 8, D-65933 Frankfurt Tel.: +49 (0)69 38016-0, Fax: +49 (0)69 38016-200 info@spectron.de www.spectron.de

GASSENTRAL BM55-2U

Pressure control panel BM55-2U 26

86

199 1/4”-NPT connection

ca.120

177

ca.184

73

spectro lab

36

57,5

36

Inlet ø 6mm pipe 450 (456mm incl. plugs)

Process gas valve also with 300 bar pneumatic-actuator upon request!

Ordering information: Pressure control panels BM55-2U

BM55 - 2U - 300 - 10 - M - M - V - N2

Inlet pressure P1

Gas type

100 - max. 100 bar 200 - max. 200 bar 300 - max. 300 bar

Please specify gas type with your order (selection of valve seat material)

Outlet pressure P2

Outlet adapter

10 - max. 10 bar (middle position = 10 bar; P2 max / min = ± 1,5 bar) 20 - max. 20 bar (middle position = 20 bar; P2 max / min = ± 1,5 bar) 50 - max. 50 bar (middle position = 50 bar; P2 max / min = ± 5 bar) 100 - max. 100 bar (middle position = 100 bar; P2 max / min = ± 10 bar) 200 - max. 200 bar (middle position = 200 bar; P2 max / min = ± 10 bar)

0 - without valve V - valve (manual) VP - pneumatic-valve

Inlet press. indication

Outlet press. indication

M K

M K

- pressure gauge - contact pressure gauge

Specifications • SPECTROLAB - components guarantee maximum quality by using high grade materials and a quality assurance program acc. to ISO 9001.

• All components which come into contact with the medium are cleaned in an ultrasonic cleaning system (CFC-free) with the special cleaning ® process SPECTRO-CLEAN and are then baked out.

• SPECTROLAB - components undergo a 100% Helium-leak-test.

- pressure gauge - contact pressure gauge

Pressure indication • All pressure reguators can be equipped with pressure gauges or contact gauges for in- and outlet pressure indication.

Important note regarding component selection • In order to assure safe operation it is essential to take the configuration of the whole system into account when selecting a control panel.

• The function of the components, the compatibility of the materials, correlating temperature ranges, correct installation, operation and maintenance in accordance with the relevant regulations are the responsibility of the system designer and the user.

Spectron Gas Control Systems GmbH Data sheet DES BM55-2U Edition 0213 Fritz-Klatte-Str. 8, D-65933 Frankfurt Subject to alteration without prior notice Tel.:|+49 38016-0, Fax: +49 (0)69 38016-200 © Spectron Gas ControlAdr.: Systems GmbH 80, N-3261Larvik Hegdalveien Tlf.:(0)69 95 800 700 | e-mail: itec@itec.as | Web: www.itec.as info@spectron.de www.spectron.de

| 61

GASSENTRAL BM55-2U

Pressure control panel BM55-2U

spectro lab

relief valve

Pressure control panel BM55-2U Outlet adapter without valve

Product features • • • • • • • • • •

• • • • •

Technical data Type Wall- and cabinet-mounting pressure control panels Inlet pressure P1 with automatic change-over function Outlet pressure P2 For non-corrosive gases up to quality 6.0 Materials Laboratory-style design Body regulator Ergonomically designed and valves: Modular design (to be extended to 2, 3 etc. cylinders) Valve seat regulator: Filter at the process gas inlet valve Valve seat valves: Diaphragm-type shut-off valves optimised for low Diaphragm regulator: internal volume with On/Off position indicator Diaphragm valve: Soft goods: Suitable for ECD-applications Diaphragm-type pressure regulator with high control Filter: Inlet connector accuracy and anti-vibration device Outlet adapter with integrated relief valve and Temperature range optional diaphragm-shut-off valve (this prevents the Leak rate (to atmosphere) outlet piping from draining during disconnecting the (via seat) panel) Pressure gauges Designed for easy installation Approved for use with oxygen Weight Compact design especially for installation into safety cabinets for gas cylinders Minimised pressure difference between left and right hand side outlet pressure Double-stage model: BM56-2U

single-stage max. 300 bar 10/20/50/100/200 bar

chrome-plated brass PA 11 PVDF Hastelloy C276 Hastelloy C276 EPDM, FKM Sintered SS 316L SS compression ring fitting 6x1 mm -30oC to +60oC 1x10-8 mbar I/s He 1x10-6 mbar I/s He Safety pressure gauges ISO5171/cl 1.6/NG50 7,7 kg

Outlet pressure P2 [bar]

Flow curves BM55-2U 20

Inlet pressure P1 = 41 bar P1 = 21 bar

10 2 0

2

3

Data sheet DES BM55-2U Edition 0213 Subject to alteration without prior notice © Spectron Gas Control Systems GmbH

62 | iTec AS

5

10

20 30 40 50 70

100

Flow rate 3 Q [m /h air]

Spectron Gas Control Systems GmbH Fritz-Klatte-Str. 8, D-65933 Frankfurt Tel.: +49 (0)69 38016-0, Fax: +49 (0)69 38016-200 info@spectron.de www.spectron.de

GASSENTRAL BM56-2U

Pressure control panel BM56-2U

spectro lab relief valve

Pressure control panel BM56-2U Product features • • • • • • • • •

• • • • •

Technical data Type Double-stage wall- and cabinet-mounting pressure Inlet pressure P1 control panels with automatic change-over function Outlet pressure P2 For non-corrosive gases up to quality 6.0 Materials Laboratory-style design Body regulator Ergonomically designed and valves: Modular design (to be extended to 2, 3 etc. cylinders) Valve seat regulator: Filter at the process gas inlet valve Valve seat valves: Diaphragm-type shut-off valves optimised for low Diaphragm regulator: internal volume with On/Off position indicator Diaphragm valve: Soft goods: Suitable for ECD-applications Double stage pressure control with 3 diaphragm-type Filter: Inlet connector pressure regulators with high control accuracy, anti-vibration device and integrated relief valve Temperature range Designed for easy installation Leak rate (to atmosphere) Approved for use with oxygen (via seat) Compact design especially for installation into safety Pressure gauges cabinets for gas cylinders Minimised pressure difference between left and right Weight hand side outlet pressure Single-stage model: BM55-2U

double-stage max. 300 bar 1,5 / 4 / 10 bar

chrome-plated brass PA 11 PVDF Hastelloy C276 Hastelloy C276 EPDM, FKM Sintered bronze B60 SS compression ring fitting 6x1 mm -30oC to +60oC 1x10-8 mbar I/s He 1x10-6 mbar I/s He Safety pressure gauges ISO5171/cl 1.6/NG50 8,7 kg

Outlet pressure P2 [bar]

Flow curves BM56-2U 10

Inlet pressure P1 = 50 bar

8 6 4

Flow rate 3 Q [m /h nitrogen]

2 0 0

10

20

30

40

50

60

Spectron Gas Control Systems GmbH Data sheet DES BM56-2U Edition 0813 Fritz-Klatte-Str. 8, D-65933 Frankfurt Subject to alteration without prior notice Tel.: |+49 38016-0, Fax: +49itec@itec.as (0)69 38016-200 © Spectron Gas ControlAdr.: Systems GmbH 80, N-3261Larvik Hegdalveien Tlf.:(0)69 95 800 700 | e-mail: | Web: www.itec.as info@spectron.de www.spectron.de

| 63

GASSENTRAL BM56-2U

Pressure control panel BM56-2U 86

212

spectro lab ca.157

86

177

ca.206

1/4”-NPT connection

Inlet ø 6mm pipe

36

57,5

36

450 (456mm incl. plugs)

Process gas valve also with 300 bar pneumatic-actuator upon request!

Ordering information: Pressure control panels BM56-2U

BM56 - 2U - 300 - 1,5 - M - M - N2

Inlet pressure P1

Gas type

100 - max. 100 bar 200 - max. 200 bar 300 - max. 300 bar

Please specify gas type with your order (selection of valve seat material)

Outlet pressure P2

Outlet press. indication

1,5 - max. 1,5 bar 4 - max. 4 bar 10 - max. 10 bar

M K

- pressure gauge - contact pressure gauge

Inlet press. indication M K

- pressure gauge - contact pressure gauge

Specifications • SPECTROLAB - components guarantee maximum quality by using high grade materials and a quality assurance program acc. to ISO 9001.

• All components which come into contact with the medium are cleaned in an ultrasonic cleaning system (CFC-free) with the special cleaning ® process SPECTRO-CLEAN and are then baked out.

• SPECTROLAB - components undergo a 100% Helium-leak-test.

Data sheet DES BM56-2U Edition 0813 Subject to alteration without prior notice © Spectron Gas Control Systems GmbH

64 | iTec AS

Pressure indication • All pressure reguators can be equipped with pressure gauges or contact gauges for in- and outlet pressure indication.

Important note regarding component selection • In order to assure safe operation it is essential to take the configuration of the whole system into account when selecting a control panel.

• The function of the components, the compatibility of the materials, correlating temperature ranges, correct installation, operation and maintenance in accordance with the relevant regulations are the responsibility of the system designer and the user.

Spectron Gas Control Systems GmbH Fritz-Klatte-Str. 8, D-65933 Frankfurt Tel.: +49 (0)69 38016-0, Fax: +49 (0)69 38016-200 info@spectron.de www.spectron.de

GASSENTRAL BM55-2A

Pressure control panel BM55-2A

spectro lab

Pressure control panel BM55-2A without outlet pressure connection Product features • Wall- and cabinet-mounting pressure control panels with fully automatic change-over function • For non-corrosive gases up to quality 5.0 • No pressure difference between the two gas source sides due to Ambimat • Maximum emptying of the gas cylinders • Laboratory-style design • Ergonomically designed • Modular design (to be extended to 2, 3 etc. cylinders) • Filter at the process gas inlet valve • Diaphragm-type shut-off valves optimised for low internal volume with On/Off position indicator • Diaphragm-type pressure regulator with high control accuracy and anti-vibration device • Designed for easy installation • Approved for use with oxygen • Suitable for inlet pressure values up to 300 bar • Compact design especially for installation into safety cabinets for gas cylinders

Technical data Type Inlet pressure P1 Outlet pressure P2

single-stage max. 300 bar max. 10 / 20 / 50 / 100 / 200 bar

Materials Body regulator and valves: Valve seat regulator: Valve seat valves: Diaphragm regulator: Diaphragm valve: Soft goods: Filter pressure regulator: Filter Ambimat: Inlet connector

chrome-plated brass PA 11 PVDF Hastelloy C276 Hastelloy C276 EPDM, FKM Sintered SS 316L Sintered bronze SS compression ring fitting 6x1 mm -15oC to +60oC Temperature range -8 Leak rate (to atmosphere) 1x10 mbar I/s He (via seat) 1x10-6 mbar I/s He Safety pressure gauges Pressure gauges ISO5171/cl 1.6/NG50 ca. 10 kg Weight

Flow curves BM55-2A

Outlet pressure P2 [bar]

20

Inlet pressure P1 = 50 bar P1 = 20 bar

15 10 5 2 0

2

3

5

10

20 30 40 50 70

100

Flow rate 3 Q [m /h nitrogen]

Spectron Gas Control Systems GmbH Data sheet DES BM55-2A Edition 0213 Fritz-Klatte-Str. 8, D-65933 Frankfurt Subject to alteration without prior notice Tel.: |+49 38016-0, Fax: +49 (0)69 38016-200 © Spectron Gas ControlAdr.: Systems GmbH 80, N-3261Larvik Hegdalveien Tlf.:(0)69 95 800 700 | e-mail: itec@itec.as | Web: www.itec.as info@spectron.de www.spectron.de

| 65

GASSENTRAL BM50-1+2

High pressure panel BM50-1+2

High pressure panel BM50-1

spectro lab

High pressure panel BM50-2

Product features

Technical data Type withour regulator • Wall- and cabinet-mounting high pressure panels Working pressure P max. 300 bar • For non-corrosive gases up to quality 6.0 Materials • Laboratory-style design Body: chrome-plated brass • Ergonomically designed Valve seat valves: PVDF • Modular design (to be extended to 2, 3 etc. cylinders) Diaphragm valve: Hastelloy C276 • Filter at the process gas inlet valve Filter: Sintered bronze SS compression ring Inlet connector • Diaphragm-type shut-off valves optimised for low fitting 6x1 mm internal volume with On/Off position indicator -30oC to +60oC Temperature range • Pressure gauge (optional) -8 (to atmosphere) 1x10 mbar I/s He Leak rate • Suitable for ECD-applications (via seat) 1x10-6mbar I/s He • Designed for easy installation BM50-1: 3,3 kg Weight • Approved for use with oxygen BM50-2: 5,3 kg • Suitable for inlet pressure values up to 300 bar • Compact design

231 225

306 300 117

117

ca.120 117

177

1/4”-NPT

36

Data sheet DES BM50-1+2 Edition 0214 Subject to alteration without prior notice © Spectron Gas Control Systems GmbH

66 | iTec AS

36

inlet ø 6mm pipe

36

Spectron Gas Control Systems GmbH Fritz-Klatte-Str. 8, D-65933 Frankfurt Tel.: +49 (0)69 38016-0, Fax: +49 (0)69 38016-200 info@spectron.de www.spectron.de

57,5

GASSENTRAL BM55+56-E

Extensions BM55+56-E

spectro lab

1/4”-NPT

1/4”-NPT

1/4”-NPT

Extensions BM55-E

Product features

Technical data Inlet pressure P1 Materials Manifold body: Filter: Inlet connection

• Extension modules for pressure control panels Spectrolab BM55 and BM56 series • For non-corrosive gases up to quality 6.0 • Laboratory-style design • Designed for easy installation • With filter at the inlet of the individual extension modules

max. 300 bar chrome-plated brass Sintered SS 316L SS compression ring fitting 6x1 mm o o -30 C to +60 C approx. 1 kg per side

Temperature range Weight

Extensions right and left for pressure control panels BM55 and BM56 with connection block: BM55-E-LH-CB

BM55-E-RH-CB

BM55-E-LH-CB

300

300

ca.70

ca.88

58

76

55

172

BM56-E-LH-CB

33

33

Extensions right and left for pressure control panels BM55 and BM56 with valve: BM55-E-RH-V

BM55-E-LH-V

BM56-E-LH-V

ca.120

ca.139

55

172

BM55-E-LH-V

33

33

58

76

Spectron Gas Control Systems GmbH Data sheet DES BM55+56-E - Edition 0113 Fritz-Klatte-Str. 8, D-65933 Frankfurt Subject to alteration without prior notice Tel.:|+49 38016-0, Fax: +49 (0)69 38016-200 © Spectron Gas ControlAdr.: Systems GmbH 80, N-3261Larvik Hegdalveien Tlf.:(0)69 95 800 700 | e-mail: itec@itec.as | Web: www.itec.as info@spectron.de www.spectron.de

| 67

GASSENTRAL BM55+56-E

Extensions BM55+56-E

spectro lab

Extension modules completely assembled

177

Example: pressure control panel BM55-2 with BM55-E-LH-CB and BM55-E-RH-CB

300

234

300

906

Ordering information: Extensions BM55+56-E

BM55 - E - LH - CB Type

Inlet

55 - single-stage pressure control panel BM55 or BM56-2U 56 - double-stage pressure control panel BM56-1 and BM56-2

CB - connection block V - valvel (manual) VP - pneumatic-valve

Side RH - right LH - left

Specifications • SPECTROLAB - components guarantee maximum quality by using high grade materials and a quality assurance program acc. to ISO 9001.

• All components which come into contact with the medium are cleaned in an ultrasonic cleaning system (CFC-free) with the special cleaning ® process SPECTRO-CLEAN and are then baked out.

• SPECTROLAB - components undergo a 100% Helium-leak-test.

Data sheet DES BM55+56-E - Edition 0113 Subject to alteration without prior notice © Spectron Gas Control Systems GmbH

68 | iTec AS

Important note regarding component selection • In order to assure safe operation it is essential to take the configuration of the whole system into account when selecting system components.

• The function of the components, the compatibility of the materials, correlating temperature ranges, correct installation, operation and maintenance in accordance with the relevant regulations are the responsibility of the system designer and the user.

Spectron Gas Control Systems GmbH Fritz-Klatte-Str. 8, D-65933 Frankfurt Tel.: +49 (0)69 38016-0, Fax: +49 (0)69 38016-200 info@spectron.de www.spectron.de

GASSENTRAL BM65-1

spectro lab

Pressure control panel BM65-1

a

B G A S e ga st

s

w

A

pr

S

B

U C H G ss g

ce

as

o

A

R

A

Pressure control panel BM65-1 with outlet connection

Product features • • • • • • • • •

Technical data Type Wall- and cabinet-mounting pressure control panels Inlet pressure P1 For non-corrosive gases up to quality 6.0 Outlet pressure P2 Laboratory-style design Materials Ergonomically designed Body regulator Modular design (to be extended to 2, 3 etc. cylinders) and valves: Filter at the process gas inlet valve Valve seat regulator: Diaphragm-type shut-off valves optimised for low Valve seat shut-off valve: internal volume with On/Off position indicator Diaphragm regulator: Diaphragm valve: Suitable for ECD-applications Piston (P2 = 50 / 100 bar): Regulator with high control accuracy and integrated Soft goods: relief valve Filter: Designed for easy installation Inlet connector Tested for use with oxygen

single-stage max. 300 bar 10 / 20 / 50 / 100 bar

chrome-plated brass PA 11 PVDF SS 301 (SS 1.4310) Hastelloy C276 brass Viton (FKM) Sintered SS 316L SS compression ring fitting 6x1 mm -30oC to +60oC Temperature range Leak rate (to atmosphere) 1x10-8mbar I/s He (via seat) 1x10-6mbar I/s He Safety pressure gauges Pressure gauges ISO5171/cl 1.6/NG50 4 kg Weight

• • • Suitable for inlet pressure values up to 300 bar • Compact design especially for installation into safety cabinets for gas cylinders • Models for outlet pressure values of up to 50 and 100 bar available (piston type regulators) • For dual-stage models see data sheet BM66-1

Outlet pressure P2 [ bar ]

Flow curves BM65 10

BM65

8

Inlet pressure P1 = 21 bar

6 4 2 0

0,2 0,3

0,5

1

2

3

4

5

10

20

Flow rate 3 Q [ m /h air ]

Spectron Gas Control Systems GmbH Data sheet DES BM65-1 Edition 0811 Fritz-Klatte-Str. 8, D-65933 Frankfurt Subject to alteration without prior notice Tel.: +49 (0)6995 38016-0, +49 (0)69 38016-200 © Spectron Gas ControlAdr.: Systems GmbH 80, N-3261Larvik | Tlf.: Hegdalveien 800 700Fax: | e-mail: itec@itec.as | Web: www.itec.as info@spectron.de www.spectron.de

| 69

GASSENTRAL BM65-1

Pressure control panel BM65-1 Dimensions

w

s

a

B G A S e ga st

pr

S

B

U C H G ss g

ce

as

o

A

R

A

ca. 150 1/4”-NPT R 1/8 elief ”-N va PT lve

172 (175 mm overall)

200 (206 mm overall)

A

spectro lab

Ordering information: Pressure control panels BM65-1

BM65 - 1 - 300 - 10 - M - M - N2 Type

Gas type

65 - single-stage control panel 66 - dual-stage control panel

Please specify gas type with your order (selection of valve seat material)

Inlet pressure P1 300 - max. 300 bar

Outlet press. indication

Outlet pressure P2

M K

4 - up to 4 bar (dual-stage) 10 - up to 10 bar 20 - up to 20 bar 50 - up to 50 bar (piston type pressure regulator) 100 - up to 100 bar (piston type pressure regulator)

Specifications • SPECTROLAB - components guarantee maximum quality by using high grade materials and a quality assurance program acc. to ISO 9001.

• All components which come into contact with the medium are cleaned in an ultrasonic cleaning system (CFC-free) with the special cleaning ® process SPECTRO-CLEAN and are then baked out.

• SPECTROLAB - components undergo a 100% Helium-leak-test.

Data sheet DES BM65-1 Edition 0811 Subject to alteration without prior notice © Spectron Gas Control Systems GmbH

70 | iTec AS

- pressure gauge - contact pressure gauge

Inlet press. indication M K

- pressure gauge - contact pressure gauge

Pressure indication • All pressure reguators can be equipped with pressure gauges or contact gauges for in- and outlet pressure indication.

Important note regarding component selection • In order to assure safe operation it is essential to take the configuration of the whole system into account when selecting a control panel.

• The function of the components, the compatibility of the materials, correlating temperature ranges, correct installation, operation and maintenance in accordance with the relevant regulations are the responsibility of the system designer and the user.

Spectron Gas Control Systems GmbH Fritz-Klatte-Str. 8, D-65933 Frankfurt Tel.: +49 (0)69 38016-0, Fax: +49 (0)69 38016-200 info@spectron.de www.spectron.de

GASSENTRAL BM66-1

spectro lab

Pressure control panel BM66-1

w

s

B G A S A t e ga as

B R pr

S A s a

U C H G A es s g oc

Pressure control panel BM66-1

Product features

Technical data Type: Inlet pressure P1: Outlet pressure P2: Materials: Body regulator and valves: Valve seat regulator: Valve seat valves: Diaphragm regulator: Diaphragm valve: Soft goods: Filter: Inlet connector:

• Double stage wall- and cabinet-mounting pressure control panels • For non-corrosive gases up to quality 6.0 • Laboratory-style design • Ergonomically designed • Modular design (to be extended to 2x2, 2x3 etc. cylinders) • Filter at the process gas inlet valve • Diaphragm-type shut-off valves optimised for low internal volume with On/Off position indicator • Suitable for ECD-applications • 2 pressure regulators with very high control accuracy and integrated relief valve Temperature range: • Designed for easy installation Leak rate: (to atmosphere) • Tested for use with oxygen (via seat) • Suitable for inlet pressure values up to 300 bar Pressure gauge: • Compact design especially for installation into safety cabinets for gas cylinders Weight:

double-stage max. 300 bar 1.5 / 4 / 10 bar

chrome-plated brass PA 11 PVDF SS 301 (SS 1.4310) Hastelloy C276 Viton (FKM) sintered SS 316L SS compression fitting 6x1 mm -30oC to +60oC 1x10-8mbar I/s He 1x10-6mbar I/s He Safety pressure gauges ISO5171/Kl1.6/NG50 approx. 6 kg

Outlet pressure P2 in bar

Flow curves BM66 10

BM66

8

Inlet pressure P1 = 21 bar

6 4 2 0

0,2 0,3

0,5

1

2

3

4

5

10

20

Flow rate 3 Q in m /h Luft

Spectron Gas Control Systems GmbH Data sheet DES BM66-1 Edition 0811 Fritz-Klatte-Str. 8, D-65933 Frankfurt Subject to alteration without prior notice Tel.:| +49 38016-0, Fax: +49 (0)69 38016-200 © Spectron Gas ControlAdr.: Systems GmbH 80, N-3261Larvik Hegdalveien Tlf.:(0)69 95 800 700 | e-mail: itec@itec.as | Web: www.itec.as info@spectron.de www.spectron.de

| 71

GASSENTRAL BM66-1

spectro lab

Pressure control panel BM66-1 300 (306 mm overall)

ca. 150

172 (175 mm overall)

1/4”-NPT w

s

B G A S A t e ga as

re lie 1/ f v 8” al -N ve PT

B R pr

S A s a

U C H G A es s g oc

1/4”-NPT

Ordering information: Pressure control panels BM66-1

Please specify gas type with your order (valve seat material)

BM - 66 - 1 - 300 - 10 - M - M - O - N2 Inlet pressure P1

Gas type

300 - max. 300 bar

Please specify gas type with your order (selection of valve seat material)

Outlet pressure P2 1,5 - max. 1,5 bar 4 - max. 4 bar 10 - max. 10 bar

Outlet

Vordruckanzeige

O U

M K

Outlet press. indication

- pressure gauge - contact gauge

M K

- top - bottom

- pressure gauge - contact gauge

Specifications

Pressure indication

• SPECTROLAB - components guarantee maximum quality by using high grade materials and a quality assurance program acc. to ISO 9001.

• All components which come into contact with the medium are cleaned in an ultrasonic cleaning system (CFC-free) with the special cleaning ® process SPECTRO-CLEAN and are then baked out.

• SPECTROLAB - components undergo a 100% function- and Helium-leak-test.

• All pressure reguators can be equipped with pressure gauges or contact gauges for in- and outlet pressure indication.

Data sheet DES BM66-1 Edition 0811 Subject to alteration without prior notice © Spectron Gas Control Systems GmbH

72 | iTec AS

Important note regarding component selection • In order to assure safe operation it is essential to take the configuration of the whole system into account when selecting a control panel.

• The function of the components, the compatibility of the materials, correlating temperature ranges, correct installation, operation and maintenance in accordance with the relevant regulations are the responsibility of the system designer and the user.

Spectron Gas Control Systems GmbH Fritz-Klatte-Str. 8, D-65933 Frankfurt Tel.: +49 (0)69 38016-0, Fax: +49 (0)69 38016-200 info@spectron.de www.spectron.de

GASSENTRAL BM65-2

Pressure control panel BM65-2

B G A S e g a st

A

w A

S

s

s

B R pr

U C H G s s g

ce

a

S

o

B G A S e g a st

A

U C H G s s g

ce

a

o

A

B R pr

A

a

s

a

s

w

A

spectro lab

Pressure control panel BM65-2 with outlet fitting

Product features • • • • • • • • • • • • • • •

Technical data Type Inlet pressure P1 Outlet pressure P2 Materials Body regulator and valves: Valve seat regulator: Valve seat shut-off valve: Diaphragm regulator: Diaphragm valve: Piston (P2=50/100bar): Soft goods: Filter: Inlet connector

Wall- and cabinet-mounting pressure control panels For non-corrosive gases up to quality 6.0 Laboratory-style design Ergonomically designed Modular design (to be extended to 2x2, 2x3 etc. cylinders) Filter at the process gas inlet valve Diaphragm-type shut-off valves optimised for low internal volume with On/Off position indicator Suitable for ECD-applications Regulator with high control accuracy and integrated relief valve Designed for easy installation Tested for use with oxygen Suitable for inlet pressure values up to 300 bar Compact design especially for installation into safety cabinets for gas cylinders Models for outlet pressure values of up to 50 and 100 bar available (piston type regulators) Dual-stage models: see BM66-2

single-stage max. 300 bar 10/20/50/100 bar

chrome-plated brass PA 11 PVDF SS 301 (SS 1.4310) Hastelloy C276 brass Viton (FKM) Sintered SS 316L SS compression ring fitting 6x1 mm -30oC to +60oC Temperature range Leak rate (to atmosphere) 1x10-8mbar I/s He (via seat) 1x10-6mbar I/s He Safety pressure gauges Pressure gauges ISO5171/cl 1.6/NG50 6 kg Weight

Outlet pressure P2 [ bar ]

Flow curves BM65 10

BM65

8

Inlet pressure P1 = 21 bar

6 4 2 0

0,2 0,3

0,5

1

2

3

4

5

10

20

Flow rate 3 Q [ m /h air ]

Spectron Gas Control Systems GmbH Data sheet DES BM65 - Edition 0811 Fritz-Klatte-Str. 8, D-65933 Frankfurt Subject to alteration without prior notice Tel.: +49 |(0)69 Fax: +49 (0)69 38016-200| Web: www.itec.as © Spectron Gas ControlAdr.: Systems GmbH 80, N-3261Larvik Hegdalveien Tlf.: 38016-0, 95 800 700 | e-mail: itec@itec.as info@spectron.de www.spectron.de

| 73

GASSENTRAL BM65-2

Pressure control panel BM65-2

spectro lab

Dimensions

A

w A

A

U C H G s s g

ce

B G A S e g a st

S

a

S

a

o

a

A

U C H G s s g

ce

A

o

s

s

B R pr

w

B G A S e g a st

Re 1/8 lief ”-N va PT lve

s

a

B R pr

A

ca. 150 1/4”-NPT

s

172 (175 mm overall)

400 (406 mm overall)

side view

Additional configurations upon request!

Ordering information: Pressure control panels BM65-2

BM - 65 - 2 - 300 - 10 - M - M - N2

Type

Gas type

65 - single-stage control panel 66 - dual-stage control panel

Please specify gas type with your order (selection of valve seat material)

Inlet pressure P1 300 - max. 300 bar

Outlet press.

Outlet pressure P2

M K

4 - up to 4 bar (dual-stage) 10 - up to 10 bar 20 - up to 20 bar 50 - up to 50 bar (piston type regulator) 100 - up to 100 bar (piston type regulator)

Data sheet DES BM65 - Edition 0811 Subject to alteration without prior notice © Spectron Gas Control Systems GmbH

- pressure gauge - Contact gauge

Inlet press. indication M K

Specifications • SPECTROLAB - components guarantee maximum quality by using high grade materials and a quality assurance program acc. to ISO 9001.

• All components which come into contact with the medium are cleaned in an ultrasonic cleaning system (CFC-free) with the special cleaning ® process SPECTRO-CLEAN and are then baked out.

• SPECTROLAB - components undergo a 100% Helium-leak-test.

74 | iTec AS

Please specify gas type with your order

- pressure gauge - Contact gauge

Pressure indication • All pressure reguators can be equipped with pressure gauges or contact gauges for in- and outlet pressure indication.

Important note regarding component selection • In order to assure safe operation it is essential to take the configuration of the whole system into account when selecting a control panel.

• The function of the components, the compatibility of the materials, correlating temperature ranges, correct installation, operation and maintenance in accordance with the relevant regulations are the responsibility of the system designer and the user.

Spectron Gas Control Systems GmbH Fritz-Klatte-Str. 8, D-65933 Frankfurt Tel.: +49 (0)69 38016-0, Fax: +49 (0)69 38016-200 info@spectron.de www.spectron.de

GASSENTRAL BM65-2U

spectro lab

Pressure control panel BM65-2U

G A A B S t e g as

s

w

a

s

wa

G A S ga

e st

s

G g

A

U C H G s s g

ce

S

a

S

o

A

ce

a

o

A

s

s

B R pr

H

U

A

B R pr

B A

Pressure control panel BM65-2U with outlet connection Product features

Technical data Type Inlet pressure P1 Outlet pressure P2 Materials Body regulator and valves: Valve seat regulator: Valve seat shut-off valve: Diaphragm regulator: Diaphragm valve: Soft goods: Filter: Inlet connector

• Wall- and cabinet-mounting pressure control panels with automatic change-over function • For non-corrosive gases up to quality 6.0 • Simple outlet pressure adjustment • Minimised pressure difference between left and right hand side outlet pressure • Laboratory-style design • Ergonomically designed • Modular design (to be extended to 2x2, 2x3 etc. cylinders) • Filter at the process gas inlet valve • Diaphragm-type shut-off valves optimised for low internal volume with On/Off position indicator • Suitable for ECD-applications • Regulator with high control accuracy and integrated relief valve • Designed for easy installation • Tested for use with oxygen • Suitable for inlet pressure values up to 300 bar • Compact design especially for installation into safety cabinets for gas cylinders

single-stage max. 300 bar max. 12 bar

chrome-plated brass PA 11 PVDF SS 301 (SS 1.4310) Hastelloy C276 Viton (FKM) Sintered SS 316L SS compression ring fitting 6x1 mm -30oC to +60oC Temperature range Leak rate (to atmosphere) 1x10-8mbar I/s He (via seat) 1x10-6mbar I/s He Safety pressure gauges Pressure gauges ISO5171/cl 1.6/NG50 8 kg Weight

Outlet pressure P2 [ bar ]

Flow curves BM65 10

BM65

8

Inlet pressure P1 = 21 bar

6 4 2 0

0.2 0.3

0.5

1

2

3

4

5

10

20

Flow rate 3 Q [ m /h air ]

Spectron Gas Control Systems GmbH Data sheet DES BM65-2U Edition 0811 Fritz-Klatte-Str. 8, D-65933 Frankfurt Subject to alteration without prior notice Tel.:| Tlf.: +49 (0)69 38016-0, Fax: +49 (0)69 38016-200 © Spectron Gas ControlAdr.: Systems GmbH 80, N-3261Larvik Hegdalveien 95 800 700 | e-mail: itec@itec.as | Web: www.itec.as info@spectron.de www.spectron.de

| 75

GASSENTRAL BM65-2U

Pressure control panel BM65-2U

spectro lab

Dimensions pressure control panel BM65-2U

ca. 155 1/4”-NPT

450

B

G A S ga

e st

G A A B S t e g as

s

w

a

172

s

wa

A

re 1/8 liev ”-N va PT lve

G

g

A

U C H G s s g

ce

S

o

a

S

s

s

B R pr

s

A

ce

a

o

A

B R pr

H

U

A

side view

Additional configurations upon request!

Ordering information: Pressure control panels BM 65-2U

BM65 - 2U - 300 - 10 - M - M - N2

Type

Gas type

65 - single-stage control panel

Please specify gas type with your order (selection of valve seat material)

Inlet pressure P1 Outlet press. indication

50 - max. 50 bar 100 - max. 100 bar 300 - max. 300 bar

M K

Outlet pressure P2

Inlet press. indication

10 - P2,max: up to 10 bar (P2,min = P2,max - 2.5 ... 3 bar)

M K

Specifications • SPECTROLAB - components guarantee maximum quality by using high grade materials and a quality assurance program acc. to ISO 9001.

• All components which come into contact with the medium are cleaned in an ultrasonic cleaning system (CFC-free) with the special cleaning ® process SPECTRO-CLEAN and are then baked out.

• SPECTROLAB - components undergo a 100% function- and Helium-leak-test.

Data sheet DES BM65-2U Edition 0811 Subject to alteration without prior notice © Spectron Gas Control Systems GmbH

76 | iTec AS

- pressure gauge - contact pressure gauge

- pressure gauge - contact pressure gauge

Pressure indication • All pressure reguators can be equipped with pressure gauges or contact gauges for in- and outlet pressure indication.

Important note regarding component selection • In order to assure safe operation it is essential to take the configuration of the whole system into account when selecting a control panel.

• The function of the components, the compatibility of the materials, correlating temperature ranges, correct installation, operation and maintenance in accordance with the relevant regulations are the responsibility of the system designer and the user.

Spectron Gas Control Systems GmbH Fritz-Klatte-Str. 8, D-65933 Frankfurt Tel.: +49 (0)69 38016-0, Fax: +49 (0)69 38016-200 info@spectron.de www.spectron.de

GASSENTRAL BM65-2L

Pressure control panel BM65-2L

B G A S e g a st

A w

A

s

s

B R pr

U C H G s s g

ce

S

o

a

S in operation

B G A S e g a st

A

U C H G s s g

ce

a

o

A

B R pr

A

a

s

a

s

w

A

spectro lab

in operation

Pressure control panel BM65-2L with outlet connection Product features

Technical data Type Inlet pressure P1 Outlet pressure P2: Materials Body regulator and valves: Valve seat regulator: Valve seat shut-off valve: Diaphragm regulator: Diaphragm valve: Piston (P2=50/100bar): Soft goods: Filter: Inlet connector

• Wall- and cabinet-mounting pressure control panels with automatic switch-over function • For non-corrosive gases up to quality 6.0 • Laboratory-style design • Ergonomically designed • Modular design (to be extended to 2x2, 2x3 etc. cylinders) • Filter at the process gas inlet valve • Diaphragm-type shut-off valves optimised for low internal volume with On/Off position indicator • Suitable for ECD-applications • Regulator with high control accuracy • Relief valve (adjustable version for P2 = 100 bar) • Designed for easy installation • Tested for use with oxygen • Suitable for inlet pressure values up to 300 bar • Compact design especially for installation into safety cabinets for gas cylinders • Models for outlet pressure values of up to 50 and 100 bar available (piston type regulators) • Dual-stage models available upon request

single-stage max. 300 bar 20/50/100 bar

chrome-plated brass PA 11 PVDF SS 301 (SS 1.4310) Hastelloy C276 brass Viton (FKM) Sintered SS 316L SS compression ring fitting 6x1 mm -30oC to +60oC Temperature range Leak rate (to atmosphere)1x10-8mbar I/s He (via seat) 1x10-6mbar I/s He Safety pressure gauges Pressure gauges ISO5171/cl 1.6/NG50 8 kg Weight

Outlet pressure P2 [ bar ]

Flow curves BM65 10

Inlet pressure P1 = 21 bar

8 6 4 2 0

0,2 0,3

0,5

1

2

3

4

5

10

20

Flow rate 3 Q [ m /h air ]

Spectron Gas Control Systems GmbH Data sheet DES BM65-2L Edition 0111 Fritz-Klatte-Str. 8, D-65933 Frankfurt Subject to alteration without prior notice Tel.:| +49 38016-0, Fax: +49 (0)69 38016-200 © Spectron Gas ControlAdr.: Systems GmbH 80, N-3261Larvik Hegdalveien Tlf.: (0)69 95 800 700 | e-mail: itec@itec.as | Web: www.itec.as info@spectron.de www.spectron.de

| 77

GASSENTRAL BM65-2L

Pressure control panel BM65-2L

spectro lab

Pressure control panel BM65-2L - Dimensions

max. 180

A w

A

U C H G s s g

ce

B G A S e g a st

S

o

a

S

a

s

s

in operation

a

A

U C H G s s g

ce

A

o

B R pr

A B R pr

w

B G A S e g a st

s

a

re 1/8 lief ”-N val PT ve

in operation

A

1/4”-NPT

s

172 (175 mm overall)

400 (406 mm overall)

50

°

side view

Additional configurations upon request!

Ordering information: Pressure control panels BM65-2L

Please specify gas type with your order

BM - 65 - 2L - 300 - 20 - M - M - N2

Type

Gas type

65 - single-stage control panel 66 - dual-stage control panel (upon request)

Please specify gas type with your order (selection of valve seat material)

Inlet pressure P1 Outlet press.

300 - max. 300 bar

M K

Outlet pressure P2

- pressure gauge - Contact gauge

Inlet press. indication

20 - up to 20 bar 50 - up to 50 bar (piston type regulator) 100 - up to 100 bar (piston type regulator)

M K

- pressure gauge - Contact gauge

Specifications

Pressure indication

• SPECTROLAB - components guarantee maximum quality by using high grade materials and a quality assurance program acc. to ISO 9001.

• All components which come into contact with the medium are cleaned in an ultrasonic cleaning system (CFC-free) with the special cleaning ® process SPECTRO-CLEAN and are then baked out.

• SPECTROLAB - components undergo a 100% function- and Helium-leak-test.

• All pressure reguators can be equipped with pressure gauges or contact gauges for in- and outlet pressure indication.

Data sheet DES BM65-2L Edition 0111 Subject to alteration without prior notice © Spectron Gas Control Systems GmbH

78 | iTec AS

Important note regarding component selection • In order to assure safe operation it is essential to take the configuration of the whole system into account when selecting a control panel.

• The function of the components, the compatibility of the materials, correlating temperature ranges, correct installation, operation and maintenance in accordance with the relevant regulations are the responsibility of the system designer and the user.

Spectron Gas Control Systems GmbH Fritz-Klatte-Str. 8, D-65933 Frankfurt Tel.: +49 (0)69 38016-0, Fax: +49 (0)69 38016-200 info@spectron.de www.spectron.de

GASSENTRAL BM65-E

spectro lab

Extensions BM 65-E

Front view BM 65-E Configuration: Left side extensions on 200 mm profile

M12

M12

1/4” NPT G3/8”

1/4” NPT

Extensions BM 65-E Product features • Extension modules for all Spectrolab BM 65 and 66 series pressure control panels • For non-corrosive gases up to quality 6.0 • Laboratory-style design • Designed for easy installation • With filter at the inlet of the individual extension modules

Technical data Inlet pressure P1 Materials Manifold body: Filter: O-ring (for M12 connection): Inlet connection Temperature range Weight

max. 300 bar chrome-plated brass Sintered SS 316L FKM SS compression ring fitting 6x1 mm o o -30 C to +60 C approx. 1 kg per side

400

Right: Standard extension module (left/right) for all BM 65 series pressure control panels

(406 mm overall)

172

(175 mm overall)

Sectional view of connector glands!

200

172

(175 mm overall)

(406 mm overall)

Messer Cutting & Welding GmbH Data sheet DES BM65-E - Edition 1009 Lärchenstr. 139a, D-65933 Frankfurt Subject to alteration without prior notice Tel.: +49 (0)6995 38016-0, +49 (0)69 38016-200 © Messer Cutting & Welding Adr.: GmbH Hegdalveien 80, N-3261Larvik | Tlf.: 800 700Fax: | e-mail: itec@itec.as | Web: www.itec.as info@spectron.de www.spectron.de

172

200

(406 mm overall)

(175 mm overall)

Bottom: Extension modules left and right in separate units

| 79

GASSENTRAL BM65-E

spectro lab

Extensions BM 65-E

Extension modules completely assembled (example: pressure control panel BM 65-2) 800

(806 mm overall)

w

s

B G A S e g a st

S

s

B R pr

U C H G s s g

ce

a

o

a

A

S

as

Additional configurations upon request!

A

A

U C H G A es s g oc

B R pr

w

A

s

B G A S A t e ga as

Ordering information: Extensions BM 65-E

BM 65 - E - 2 x 2

Type 1 x 2 - Extensions for panels BM 65/66-1 to 2 cylinders 1 x 3 - Extensions for panels BM 65/66-1 from 1 x 2 to 1 x 3 cylinders 1 x 4 - Extensions for panels BM 65/66-1 from 1 x 2 to 1 x 4 cylinders 2 x 2 - Extensions for panels BM 65/66-2 ... to 2 x 2 cylinders 2 x 3 - Extensions for panels BM 65/66-2 ... from 2 x 2 to 2 x 3 cylinders 2 x 4 - Extensions for panels BM 65/66-2 ... from 2 x 2 to 2 x 4 cylinders

Specifications • SPECTROLAB - components guarantee maximum quality by using high grade materials and a quality assurance program acc. to ISO 9001.

• All components which come into contact with the medium are cleaned in an ultrasonic cleaning system (CFC-free) with the special cleaning ® process SPECTRO-CLEAN and are then baked out.

• SPECTROLAB - components undergo a 100% Helium-leak-test.

Data sheet DES BM65-E - Edition 1009 Subject to alteration without prior notice © Messer Cutting & Welding GmbH

80 | iTec AS

Important note regarding component selection • In order to assure safe operation it is essential to take the configuration of the whole system into account when selecting system components.

• The function of the components, the compatibility of the materials, correlating temperature ranges, correct installation, operation and maintenance in accordance with the relevant regulations are the responsibility of the system designer and the user.

Messer Cutting & Welding GmbH Lärchenstr. 139a, D-65933 Frankfurt Tel.: +49 (0)69 38016-0, Fax: +49 (0)69 38016-200 info@spectron.de www.spectron.de

GASSENTRAL BM65-AC

Pressure control panels BM65-AC

spectro lab

Pressure control panel BM65-1-M-KH-C2H2

Pressure control panel BM65-2-M-KH-C2H2

Product features

Technical data Type Inlet pressure P1 Outlet pressure P2 Materials Body regulator and connection blocks: Valve cone regulator: Diaphragm regulator: Ball valve: Connectors Inlet Outlet flashback arrestor Outlet relief valve Outlet over-pressure valve Temperature range Leak rate Pressure gauges

• • • • • • • • • • • • • •

Wall-mounting pressure control panels for acetylene Single-stage systems for 1 or 2 cylinders Laboratory-style design Ergonomically designed Pressure regulator with high control accuracy and integrated relief valve for protection of the device Quick-acting shut-off valve (manual) optionally: automatic quick-acting shut-off device optionally: Acetylene Safety Guard (ASG) For further information please see data sheet ASG Flashback arrestor Over-pressure valve * Designed for easy installation Suitable for inlet pressure values up to 25 bar Compact design especially for installation into safety cabinets for gas cylinders Pressure control panels comply with DIN-EN-ISO 14114 and DIN-EN-ISO 15615

* An over-pressure valve cannot be used as an safety accessory according to the Pressure Equipment Directive (PED).

Weight

single-stage max. 25 bar 1,5 bar

brass PA EPDM steel, zinc-plated

M 16 x 1,5 male 1/4”-NPT female 1/8”-NPT female welding stub 14 x 2 -30oC to +60oC 1x10-4 mbar I/s He Safety pressure gauges ISO5171/Kl2.5/NG63 BM65-1-AC: ca. 6 kg BM65-2-AC: ca. 7 kg

Flow rates BM65-AC: The maximum flow rate is approx. 8 sm³/h acetylene.

At an inlet pressure of approx. 4 bar (resembling an acetylene cylinder almost empty) the pressure regulator still yields approx. 5 sm³/h acetylene.

Inlet press. P1 [bar] 18 10 4 2

0,5 5,0 m3/h 4,5 m3/h 3 3,0 m /h 1,5 m3/h

Outlet press. P2 [bar] 1,2 1 6,0 m3/h 8,0 m3/h 6,5 m3/h 5,5 m3/h 3 3 4,0 m /h 5,0 m /h 2,0 m3/h 3,0 m3/h

The withdrawal rate should not exceed approx. 0,5 sm³/h per cylinder in permanent operation, so no solvent from the cylinder will enter the withdawal system. However, the flow rate may be increased to approx. 1 sm³/h for brief peak loads.

Spectron Gas Control Systems GmbH Data sheet DDS BM65-AC Edition 0817 Fritz-Klatte-Str. 8, D-65933 Frankfurt Subject to alteration without prior notice Tel.: +49 38016-0, Fax: +49itec@itec.as (0)69 38016-200 © Spectron Gas ControlAdr.: Systems GmbH 80, N-3261Larvik | Tlf.:(0)69 Hegdalveien 95 800 700 | e-mail: | Web: www.itec.as info@spectron.de www.spectron.de

| 81

GASSENTRAL BM65-AC

Pressure control panels BM65-AC

spectro lab

350 (incl. plugs: 356 mm)

173 14x2

172

1/8- NPT

450 (incl. plugs: 456 mm)

172

1/8- NPT

Ordering information: Pressure control panels BM65-AC

BM65 - 1 - M - KH - C2H2 Type

Quick-acting shut-off

1 2

KH - manual quick-acting shut-off device (ball valve) SSE - automatic quick-acting shut-off device SSE ASG- Acetylene Safety Guard

- panel for 1 cylinder - panel for 2 cylinders

Outlet press. indication M K

- Pressure gauge - Contact pressure gauge

Data sheet DDS BM65-AC Edition 0817 Subject to alteration without prior notice © Spectron Gas Control Systems GmbH

82 | iTec AS

Spectron Gas Control Systems GmbH Fritz-Klatte-Str. 8, D-65933 Frankfurt Tel.: +49 (0)69 38016-0, Fax: +49 (0)69 38016-200 info@spectron.de www.spectron.de

GASSENTRAL BM65-2A-AC

Pressure control panel BM65-2A-AC

spectro lab

Pressure control panel BM65-2A-K-KH-SV-V for Acetylene with manual quick acting shut-off valve (ball valve), over-pressure valve SV73 and individual ball valves for each cylinder

Product features

Technical data

• Wall mounting pressure control panel for acetylene with fully automatic change-over function • Minimised pressure difference between left and right hand side outlet pressure due to Ambimat • Maximum emptying of gas cylinders • Designed for easy installation • Pressure regulator with high control accuracy and integrated relief valve for protection of the device • Pressure control panels comply with DIN-EN-ISO 14114 and DIN-EN-ISO 15615 • With all BAM-tested safety devices, e.g.: • Quick-acting shut-off valve • Flashback arrestor • optionally: over-pressure valve * • optionally: automatic quick-acting shut-off device

Type Inlet pressure P1 Outlet pressure P2 Change-over pressure PU Materials Body regulator: Diaphragm regulator: Valve cone regulator: Mounting plate: Ball valve: Connection tube: Connectors Inlets: Outlet flashback arrestor: Outlet relief valve: Outlet over-pressure valve: Temperature range Leak rate Weight

Attention: Acetylene withdrawal systems may need to be certified before commisioning. Always refer to the local rules and regulations regarding such certifications.

* An over-pressure valve cannot be used as an safety accessory according to the Pressure Equipment Directive (PED).

single-stage max. 25 bar max. 1,5 bar ca. 3 bar brass EPDM PA stainless steel steel, zinc-plated steel, zinc-plated M16 x 1,5 male 1/4”-NPT female 1/8”-NPT female welding stub 14 x 2 +15°C to +60°C -4 <10 mbar l/s He 15 kg

Flow rates for BM65-2A-AC: The maximum flow rate is approx. 8 sm³/h acetylene.

At an inlet pressure of approx. 4 bar (resembling an acetylene cylinder almost empty) the pressure regulator still yields approx. 5 sm³/h acetylene.

Inlet press. P1 [bar] 18 10 4 2

0,5 5,0 m3/h 4,5 m3/h 3 3,0 m /h 1,5 m3/h

Outlet press. P2 [bar] 1,2 1 6,0 m3/h 8,0 m3/h 3 6,5 m3/h 5,5 m /h 3 3 4,0 m /h 5,0 m /h 2,0 m3/h 3,0 m3/h

The withdrawal rate should not exceed approx. 0,5 sm³/h per cylinder in permanent operation, so no solvent from the cylinder will enter the withdawal system. However, the flow rate may be increased to approx. 1 sm³/h for brief peak loads.

Spectron Gas Control Systems GmbH Data sheet DES BM65-2A-AC Edition 1115 Fritz-Klatte-Str. 8, D-65933 Frankfurt Subject to alteration without prior notice Tel. |+49 38016-0, Fax +49itec@itec.as (0)69 38016-200 © Spectron Gas ControlAdr.: Systems GmbH 80, N-3261Larvik Hegdalveien Tlf.:(0)69 95 800 700 | e-mail: | Web: www.itec.as info@spectron.de www.spectron.de

| 83

GASSENTRAL BM65-2A-AC

spectro lab

Pressure control panel BM65-2A-AC Dimensions - pressure control panel BM65-2A-K-KH-SV-V-C2H2 662 105

Ø8

ca.196

44

38

157 76,5

1/4”-NPT

Ø 14x2

Ø 1/8"

292

172

1/8”-NPT

36

M16x1.5

234

56,5

ca. 471

Ordering information: Pressure control panels BM65-2A-AC

BM65-2A - M - KH - SV - 0 - C2H2 Inlet press. indication

Individual shut-off

M K

0 V

- Pressure gauge - Contact pressure gauge

- without individual valves - with additional ball valves for each individual cylinder

Quick-acting shut-off

Over-pressure valve

KH - manual quick-acting shut-off device (ball valve) SSE - automatic quick-acting shut-off device SSE

0 - without over-pressure valve SV - with over-pressure valve

Specifications

Important note regarding component selection

• SPECTROLAB - components guarantee maximum quality by using high grade materials and a quality assurance program acc. to DIN ISO 9001.

• All components which come into contact with the medium are cleaned free of oil and grease before the assembly.

• SPECTROLAB - components undergo a 100% leak- and function test.

• In order to assure safe operation it is essential to take the configuration of the whole system into account when selecting a control panel.

• The function of the components, the compatibility of the materials, correlating temperature ranges, correct installation, operation and maintenance in accordance with the relevant regulations are the responsibility of the system designer and the user.

Data sheet DES BM65-2A-AC Edition 1115 Subject to alteration without prior notice © Spectron Gas Control Systems GmbH

84 | iTec AS

Spectron Gas Control Systems GmbH Fritz-Klatte-Str. 8, D-65933 Frankfurt Tel. +49 (0)69 38016-0, Fax +49 (0)69 38016-200 info@spectron.de www.spectron.de

Control Panels BM55/BE55

VENTILER MV3-M

Shut-off valves MV3-M

MV3-DV-H-M-NPTF1/4

spectro lab

MV3-DV-PN25/100/300-M-NPTF1/4

Product features • Brass valves for manual or automatic (pneumatic) shut-off • For non corrosive gases and gas mixtures up to qualität 6.0 • Diaphragm metal-to-metal sealed to atmosphere • In- and outlet filter • Suitable for pressures up to 300 bar • Fully functional under vacuum • Ergonomically designed • New laboratory-style design • Compact design • Manual valve with position indicator

Technical data Operating pressure Nominal diameter Materials Body: Diaphragm: Valve seat: Filter: Inlet Outlet Temperature range Leak rate Weight cv-value

• Pneumatic actuator optional for line pressure 25, 100, 200 and 300 bar • Optional with inductive proximity switch • Variable installation position

* with filter (must be installed for the use of oxygen)

max. 300 bar 4 mm chrome-plated brass Hastelloy C276 PVDF sintered bronze 1/4”-NPT female 1/4”-NPT female -30°C to +60°C -8 <10 mbar l/s He 0,5 kg cv = 0,33 / 0,09*

Technical data pneumatic actuators 6 to 8 bar Actuator pressure: Actuator connector: for hose Ø 4mm Pneumatic function: - normally closed (NC) - normally open (NO) - inductive proximity switch Option:

Data sheet DES MV3-M Edition 1017 Subject to alteration without prior notice © Spectron Gas Control Systems GmbH

86 | iTec AS

Spectron Gas Control Systems GmbH Fritz-Klatte-Str. 8, D-65933 Frankfurt Tel.: +49 (0)69 38016-0, Fax: +49 (0)69 38016-200 info@spectron.de www.spectron.de

VENTILER MV3-M

Shut-off valves MV3-M

spectro lab

Dimensions shut-off valve MV3 ø4

optional: inductive proximity switch

pneumatic actuator

NC

PN 25

108

98

PN 100

116

106

PN 200

125

115

PN 300

142

132

1/4"-NPT

L NO

11

M6-mounting hole

30

1/4"-NPT

63

ø 56

11

1/4"-NPT

1/4"-NPT

L

Dimensions with pneumatic actuator (in mm):

ø 45

ø 45

Ordering information: MV3-M series valves

MV3 - DV - H - M - NPTF1/4 Type

Valve

DV - globe valve (2 ports)

H

Other types upon request

PN... - pneumatic actuator PN 25/100/200/300 PNI... - pneumatic actuator PN 25/100/200/300 with inductive proximity switch - pneumatic actuator NO / NC N...

- manual valve

Specifications

Important note regarding component selection

• SPECTROLAB - components guarantee maximum quality by using high grade materials and a quality assurance program acc. to ISO 9001.

• In order to assure safe operation it is essential to take the configuration of the whole system into account when selecting a component.

• All components which come into contact with the medium are cleaned in an ultrasonic cleaning system (CFC-free) with the special cleaning process SPECTRO-CLEAN® and are then baked out.

• The function of the component, the compatibility of the materials, correlating temperature ranges, correct installation, operation and maintenance in accordance with the relevant regulations are the responsibility of the system designer and the user.

• SPECTROLAB - components undergo a 100% Helium-leak-test.

Spectron Gas Control Systems GmbH Data sheet DES MV3-M Edition 1017 Fritz-Klatte-Str. 8, D-65933 Frankfurt Subject to alteration without prior notice Tel.: +49 38016-0, Fax: +49 (0)69 38016-200 © Spectron Gas ControlAdr.: Systems GmbH 80, N-3261Larvik | Tlf.:(0)69 Hegdalveien 95 800 700 | e-mail: itec@itec.as | Web: www.itec.as info@spectron.de www.spectron.de

| 87

VENTILER DVM

Diaphragm valves DVM

DVM-8-NPT-F-1/4 SA

spectro lab

DVM-8-OD-6

Product features • Brass diaphragm valve • For non-corrosive gases and gas mixtures up to quality 6.0 • Suitable for pressures up to 40 bar • Fully functional under vacuum • Wide range of in-/ outlets • Metal-to metal sealing to atmosphere • Suitable to use with oxygen • Ergonomically designed

DVM-8-OD-1/4

Technical data Type Working pressure

Diaphragm valve DN8, DN13: max. 40 bar DN19: max. 25 bar

Materials Body: Diaphragm:

chrome plated brass DN8 stainless steel 1.4571 DN13/19 stainless steel 1.4310 In- and outlets Female thread or stainless steel welding stub Temperature range -30°C to +60°C -8 Leak rate <10 mbar l/s He Seat diameter 8, 13 or 19 mm Flow DN8: 1/4”-NPT 1,47 capacity (cv) 3/8”-NPT 1,47 tube 6x1 mm 0,47 tube 8x1 mm 1,09 tube 10x1 mm 1,47 tube 1/4” male 0,64 tube 3/8” male 1,58 DN13: 2,1 DN19: 3,1

DVM-13-NPT-F-1/2 DVM-19-NPT-F-3/4

Data sheet DES DVM Edition 0218 Subject to alteration without prior notice © Spectron Gas Control Systems GmbH

88 | iTec AS

Spectron Gas Control Systems GmbH Fritz-Klatte-Str. 8, D-65933 Frankfurt Tel.: +49 (0)69 38016-0, Fax +49 (0)69 38016-200 info@spectron.de www.spectron.de

VENTILER DVM

Diaphragm valves DVM

spectro lab

Ordering information: Diaphragm valves DVM

DVM - 13 - NPT F - 1/2 8

13

NPT F 1/4* NPT F 3/8* OD 6* OD 8* OD 10* OD 1/4* OD 3/8*

- 1/4”-NPT female - 3/8”-NPT female - SS-tube 6x1 mm - SS-tube 8x1 mm - SS-tube 10x1 mm - SS-tube 1/4” male - SS-tube 3/8” male

*option: ... SA

- with position indicator

NPT F 1/2 OD 12 OD 15 OD 1/2

19

- 1/2”-NPT female - SS-tube 12x1 mm - SS-tube 15x1 mm - SS-tube 1/2” male

NPT F 3/4 OD ...

- 3/4”-NPT female - SS-tube upon request

Dimensions

øB 13,5 ca.73

øB

3/8”-NPT 13,5 ca.73

DVM-8-OD...

A

62

*

øB

ca.113

ca.141 øB

24

3/4”-NPT

ca.141

DVM-19-OD...

3/4”-NPT

DVM-19-NPT-F-3/4

øB 24

1/2”-NPT

25,5

A

100

106

* M6 mounting hole

ca.113

DVM-13-OD...

1/2”-NPT

DVM-13-NPT-F-1/2

*

øB 25,5

62

DVM-8-NPT-F-3/8

3/8”-NPT

1/4”-NPT

1/4”-NPT 13,5 ca.73

DVM-8-NPT-F-1/4

A

Spectron Gas Control Systems GmbH Data sheet DES DVM Edition 0218 Fritz-Klatte-Str. 8, D-65933 Frankfurt Subject to alteration without prior notice Tel.: +49 38016-0, Fax +49itec@itec.as (0)69 38016-200 © Spectron Gas ControlAdr.: Systems GmbH 80, N-3261Larvik | Tlf.:(0)69 Hegdalveien 95 800 700 | e-mail: | Web: www.itec.as info@spectron.de www.spectron.de

| 89

VENTILER V6M-3

Control- and shut-off valves V6M-3

spectro lab

78

52

52

Dimensions: valves V6M-3

50

Control valve EV-V6M-3

25

Product features • Available as control valve (e. g. for the pressure regulator outlet) • High control accuracy • Shut-off valves (e.g. for in- and outlets of pressure regulators with inert gas purge arrangements) • Diaphragm metal-to-metal sealed to atmosphere • Ergonomically designed • New laboratory-style design • Compact design

Technical data Operating pressure Control valve: Shut-off valve: Nominal diameter Materials Body: Diaphragm: Control spindle: Inlet connection Outlet connection Leak rate Weight Flow rate cv-value shut-off valve

max. 50 bar max. 200 bar 3 mm chrome-plated brass Duratherm 600 SS 1.4404 (SS 316 L) 1/4”-18 NPT-M 1/4”-18 NPT-F <10-8 mbar l/s He 0,5 kg see flow curves cv = 0,08

Flow curves control valve V6M-3

Flow rate Q [ l/h air ]

2500

10 bar

2000

1500 4 bar

1000

500

1,5 bar 0,7 bar

0 1/12

3/12

1/2

1

1 1/2

2

2 1/2

Revolutions of the handwheel Data sheet DES V6M-3 - Edition 0912 Subject to alteration without prior notice © Spectron Gas Control Systems GmbH

90 | iTec AS

Spectron Gas Control Systems GmbH Fritz-Klatte-Str. 8, D-65933 Frankfurt Tel.: +49 (0)69 38016-0, Fax: +49 (0)69 38016-200 info@spectron.de www.spectron.de

3

VENTILER V6M-3

Control- and shut-off valves V6M-3

spectro lab

Detail: Control valve seat

52

52

Dimensions valves V6M-3

50

1/4”-18 NPT-F

25

1/4”-18 NPT-F

1/4”-18 NPT-M

1/4”-18 NPT-M

78

Detail: Shut-off valve seat

Ordering information: V6M-3 series valves

DV - V6M-3 - CV Type

Function

DV - globe valve EV - angle valve

AV - shut-off valve CV - control valve

Article numbers control valves

Article numbers shut-off valves

globe valve angle valve

globe valve angle valve

DV-V6M-3-CV: EV-V6M-3-CV:

71801038 71801036

DV-V6M-3-AV: 71804363 EV-V6M-3-AV: 71804364

Specifications

Important note regarding component selection

• SPECTROLAB - components guarantee maximum quality by using high grade materials and a quality assurance program acc. to ISO 9001.

• In order to assure safe operation it is essential to take the configuration of the whole system into account when selecting a component.

• All components which come into contact with the medium are cleaned in an ultrasonic cleaning system (CFC-free) with the special cleaning process SPECTRO-CLEAN® and are then baked out.

• The function of the component, the compatibility of the materials, correlating temperature ranges, correct installation, operation and maintenance in accordance with the relevant regulations are the responsibility of the system designer and the user.

• SPECTROLAB - components undergo a 100% Helium-leak-test.

Spectron Gas Control Systems GmbH Data sheet DES V6M-3 - Edition 0912 Fritz-Klatte-Str. 8, D-65933 Frankfurt Subject to alteration without prior notice Tel.:|+49 38016-0, Fax: +49 (0)69 38016-200 © Spectron Gas ControlAdr.: Systems GmbH 80, N-3261Larvik Hegdalveien Tlf.:(0)69 95 800 700 | e-mail: itec@itec.as | Web: www.itec.as info@spectron.de www.spectron.de

| 91

UTTAKSPOST EM55

Tapping points EM55

spectro lab Dimensions EM55-1 bottom inlet

ca.205

172 (incl. plugs: 177)

top inlet version

26

50

50

26

100 (incl. plugs: 106)

Tapping point EM55-4

Product features • Wall-mounting tapping points • For non-corrosive gases up to quality 6.0 • Laboratory-style design • Ergonomically designed • Filter at the process gas inlet valve • Diaphragm-type shut-off valves optimised for low internal volume with On/Off position indicator • Suitable for ECD-applications • Pressure regulator with high control accuracy • Designed for easy installation • Approved for use with oxygen • Tapping point can be extended into multiple tapping points • Top-inlet or bottom-inlet configurations available

Technical data Inlet pressure P1 Outlet pressure P2 Materials Body regulator and valves: Valve seat regulator: Valve seat valves: Diaphragm regulator: Diaphragm valve: Soft goods: Filter: Connectors Temperature range Leak rate (to atmosphere) (via valve seat) Pressure gauges Weight

max. 200 bar 1,5 / 4 / 10 / 20 / 50 bar

chrome-plated brass PA PVDF Hastelloy C276 Hastelloy C276 FKM Sintered SS 316L 1/4”-NPT female -30oC to +60oC 1x10-8mbar I/s He 1x10-6mbar I/s He Safety pressure gauges ISO5171/Kl1.6/NG50 2,5 kg

Outlet pressure P2 [bar]

Flow curves EM55 10 9 8 7 6 5 4 3 2 1 0

Inlet pressure: P1 = 21 bar

Flow rate 3 Q [m /h Nitrogen]

0

10

Data sheet DES EM55 - Edition 1115 Subject to alteration without prior notice © Spectron Gas Control Systems GmbH

92 | iTec AS

20

30

40

50

Spectron Gas Control Systems GmbH Fritz-Klatte-Str. 8, D-65933 Frankfurt Tel.: +49 (0)69 38016-0, Fax: +49 (0)69 38016-200 info@spectron.de www.spectron.de

60

UTTAKSPOST EM55

spectro lab

Tapping points EM55 26

100

100

100

ca.177

1/4”-NPT

51,5

1/4”-NPT ca.151

50

100

100

100

30

100 EM55-2: 200 (incl. plugs: 206) EM55-3: 300 (incl. plugs: 306) EM55-4: 400 (incl. plugs: 406)

Ordering information: Tapping points EM55

Please specify gas type with order

EM55 - 1 - 40 - 10 - O Type

Inlet

1 2 3 4

O U

- single tapping point - double tapping point - triple tapping point - 4 tapping points

- top inlet - bottom inlet

Outlet pressure P2 Inlet pressure P1 40 - 40 bar 100 - 100 bar 200 - 200 bar

Specifications • SPECTROLAB - components guarantee maximum quality by using high grade materials and a quality assurance program acc. to ISO 9001.

• All components which come into contact with the medium are cleaned in an ultrasonic cleaning system (CFC-free) with the special cleaning ® process SPECTRO-CLEAN and are then baked out.

• SPECTROLAB - components undergo a 100% function- and Helium-leak-test.

1,5 - 1,5 bar 4 - 4 bar 10 - 10 bar 20 - 20 bar 50 - 50 bar Higher outlet pressure upon request

Pressure indication • All pressure reguators are equipped with pressure gauges for outlet pressure indication for the relevant pressure range.

Important note regarding component selection • In order to assure safe operation it is essential to take the configuration of the whole system into account when selecting a tapping point.

• The function of the components, the compatibility of the materials, correlating temperature ranges, correct installation, operation and maintenance in accordance with the relevant regulations are the responsibility of the system designer and the user.

Spectron Gas Control Systems GmbH Data sheet DES EM55 - Edition 1115 Fritz-Klatte-Str. 8, D-65933 Frankfurt Subject to alteration without prior notice Tel.:| +49 38016-0, Fax: +49 (0)69 38016-200 © Spectron Gas ControlAdr.: Systems GmbH 80, N-3261Larvik Hegdalveien Tlf.:(0)69 95 800 700 | e-mail: itec@itec.as | Web: www.itec.as info@spectron.de www.spectron.de

| 93

UTTAKSPOST EM65

Tapping points EM65

spectro lab Dimensions EM65-1 b) bottom inlet version a) top inlet version

s

U C H G s s g

ce

• For non-corrosive gases up to quality 6.0 • Laboratory-style design • Ergonomically designed • Filter at the process gas inlet valve • Diaphragm-type shut-off valves optimised for low internal volume with On/Off position indicator • Suitable for ECD-applications • Regulator with high control accuracy • Designed for easy installation • Tested for use with oxygen • Tapping point can be extended into multiple tapping points • Top-inlet or bottom-inlet configurations available

Outlet pressure P2 [ bar ]

Flow curves EM65 10

EM65

8

Inlet pressure P1 = 21 bar

6 4 2 0,5

Data sheet DES EM65 Edition 0511 Subject to alteration without prior notice © Spectron Gas Control Systems GmbH

94 | iTec AS

s

Technical data Inlet pressure P1 max. 40 bar Outlet pressure P2 1.5 / 4 / 10 / 20 bar Materials Body regulator and valve: chrome-plated brass Valve seat regulator: PA 11 Valve seat shut-off valve: PVDF Diaphragm regulator: SS 301 (SS 1.4310) Diaphragm valve: Hastelloy C276 Soft goods: Viton (FKM) Filter: Sintered SS 316L 1/4”-18 NPT-F Connectors -30oC to +60oC Temperature range Leak rate (to atmosphere) 1x10-8 mbar I/s He (via seat) 1x10-6 mbar I/s He Safety pressure gauge Pressure gauges EN562 / cl. 1.6 / NG50 2.5 kg Weight

• Wall-mounting tapping points

0,2 0,3

S

a

100 (106 mm including plug)

Product features

0

A

o

approx. 206 (approx. 208 mm including plug)

S

Tapping points EM65-4

A

B R pr

U C H G s s g

ce

a

o

A

B R pr

A

172 (175 mm including plug)

100 (106 mm including plug)

1

2

3

4

5

10

20

Spectron Gas Control Systems GmbH Fritz-Klatte-Str. 8, D-65933 Frankfurt Tel.: +49 (0)69 38016-0, Fax: +49 (0)69 38016-200 info@spectron.de www.spectron.de

Flow rate 3 Q [ m /h air ]

UTTAKSPOST EM65

Tapping points EM65

spectro lab

Dimensions Tapping points EM65 in multiple installations

172

(175 mm including plugs)

B R pr

B R pr

B R pr

B R pr

s

172

S

s

(175 mm including plugs)

U C H G s s g

ce

a

o

EM65-4

Ordering information: EM65 series tapping points

Please specify gas type with your order (valve seat material)

EM65 - 1 - 40 - 10 - O Type

Inlet

1 2 3 4

O U

- Single tapping point - double tapping point - triple tapping point - 4 tapping points

A

A

U C H G s s g

ce

S

o

a

s

B R pr

A

A

U C H G s s g

ce

S

EM65-3

o

a

s

B R pr

A

A

U C H G s s g

ce

S

o

a

s

B R pr

A

A

U C H G s s g

ce

S

o

a

s

172

A

A

U C H G s s g

ce

S

o

a

s

s

B R pr

A

A

U C H G s s g

ce

S

o

a

S

s

EM65-2

A

A

U C H G s s g

ce

a

S

o

(175 mm including plugs)

A

(406 mm including plugs)

(306 mm including plugs)

A

U C H G s s g

ce

a

o

A

B R pr

A

400

300

200 (206 mm including plugs)

- Top-inlet - Bottom-inlet

Inlet pressure P1

Outlet pressure P1

40 - 40 bar

1.5 - 1.5 bar 4 - 4 bar 10 - 10 bar 20 - 20 bar Higher outlet pressure values upon request

Specifications • SPECTROLAB - components guarantee maximum quality by using high grade materials and a quality assurance program acc. to ISO 9001.

• All components which come into contact with the medium are cleaned in an ultrasonic cleaning system (CFC-free) with the special cleaning ® process SPECTRO-CLEAN and are then baked out.

• SPECTROLAB - components undergo a 100% function- and Helium-leak-test.

Pressure indication • All pressure reguators are equipped with pressure gauges for outlet pressure indication for the relevant pressure range.

Important note regarding component selection • In order to assure safe operation it is essential to take the configuration of the whole system into account when selecting a tapping point.

• The function of the components, the compatibility of the materials, correlating temperature ranges, correct installation, operation and maintenance in accordance with the relevant regulations are the responsibility of the system designer and the user.

Spectron Gas Control Systems GmbH Data sheet DES EM65 Edition 0511 Fritz-Klatte-Str. 8, D-65933 Frankfurt Subject to alteration without prior notice Tel.: +49 (0)69 +49 (0)69 38016-200 © Spectron Gas ControlAdr.: Systems GmbH 80, N-3261Larvik Hegdalveien | Tlf.: 9538016-0, 800 700 Fax: | e-mail: itec@itec.as | Web: www.itec.as info@spectron.de www.spectron.de

| 95

UTTAKSPOST EM15/EE15

Compact laboratory tapping points EM15: for non-corrosive gases EE15: for corrosive gases Surface-mounted

Surface-mounted angle

Panel-mounted

Laboratory equipment with rear wall inlet and front outlet

Laboratory equipment with rear wall inlet and rear outlet

Laboratory equipment with rear wall inlet and rear outlet

Type AW

Type AE

Type EP

Valves / wall outlets

Panel-mounted front

Laboratory equipment with rear wall inlet and front outlet

Laboratory equipment with rear wall inlet and front outlet

Type AW / EP

Type EF

Wall-mounted

Column-mounted

Ceiling-mounted

Laboratory equipment for wall mounting (surface-mounted pipework)

Column-mounted laboratory equipment and front outlet

Laboratory equipment with top inlet and front outlet

Type ES

Type SC

Type DC C

Gas Control Systems

96 | iTec AS

UTTAKSPOST EM15/EE15

Compact laboratory tapping points EM15 / EE15

without valve (long)

EM15 / EE15 - P2 up to 1,5 bar

1,6

P1=10bar

1,4

P1=10bar

1,2

P1=10bar

1

P1=4bar P1=4bar

0,8

P1=4bar

0,6

Materials Body

M15: E15:

Diaphragms: other gas wetted surfaces: Valve cone: Valve seat: Cover:

brass SS 1.4404 (316L) Hastelloy C276 brass or SS 1.4404 (316L) SS 1.4404 (316L) PTFE Polypropylene GB30

Leak rate (to atmosphere):

10-8 mbar l/s He

Filter

150 μm

Pressure ranges Inlet P1 (P2 up to 10 bar):

max. 40 bar max. 100 bar 1,0 / 1,5 / 2,5 / 5 / 10 / 16 / 25 / 65 bar

(P2 > 10 bar):

max. outlet pressure P2:

P2 up to 10 bar: The pressure setting will be done at 10 bar inlet pressure. The limitation of the outlet pressure setting is approx. P2 + 5%.

P2 > 10 bar: The inlet pressure for the pressure setting will be done according to the customer´s / user´s specication.

Flow rates with valve in the outlet

see ow curves

Connection to rear-wall connector

G 3/8“ RH

EM15 / EE15 - P2 up to 4 bar

4,5 4 P1=10bar

3,5 3

P1=10bar

2,5 2

1,5

0,4 0,2

Outlet pressure P2 [bar]

blind without regulator

Technical data

0 0,2

0,4

0,6

0,8

1

1,2

1,4

1,6

1,8

2

2,2

2,4

2,6

2,8

3

3,2

3,4

3,6

Flow rate Q [m3/h O2]

EM15 / EE15 - P2 up to 10 bar

12 P1=21bar

10

P1=21bar 8

P1=21bar P1=15bar

6

P1=15bar P1=15bar

4 2 0 1

2

3

4

5

6

7

8

9

10

11

12

13

14

Flow rate Q [m3/h O2]

1

0,5

Outlet pressure P2 [bar]

Outlet pressure P2 [bar]

Specifications • The special laboratory tapping points incorporate the functions shut-off, pressure regulation and pressure indication in one compact, ergonomic unit.

• EM15: for non-corrosive gases up to quality 6.0 • EE15: for corrosive gases and gas mixtures with corrosive components up to quality 6.0 • The pressure regulator is diaphragm sensed for outlet pressures up to 10 bar and piston sensed for higher outlet pressure values.

• The acetone resistant pressure gauge is safely integrated into the adjusting hand wheel to create an extremely compact device.

• Integrated shut-off valve in the rear-wall connector allows the preparation of the tapping point without pressure regulator.

• Quick and easy mounting or disassembly of the regulating unit with lled gas piping.

• Diaphragm shut-off valve with position indicator • Optional ow control / shut-off valve in the outlet • All gas-wetted components have undergone the special SPECTROCLEAN© cleaning process and have been thoroughly baked out.

• For ECD-applications the devices can be treated in an extended cleaning process.

• All equipment has been 100%-helium-leak-tested using a mass-spectrometer.

• All components are plastic-covered resistant to acid and alkaline solutions.

• Acetylene version optional with ashback arrester.

without valve

Outlet pressure P2 [bar]

with c control / shut-off valve ve

0 0

0,5

1

1,5

2

2,5

3

3,5

4

4,5

5

5,5

6

6,5

7

Flow rate Q [m3/h O2]

EM15 / EE15 - P2 up to 25 bar

30

P1=50bar 25

P1=50bar P1=30bar

20

P1=30bar

15 10 5 0 2

4

6

8

10

12

14

16

18

20

22

24

26

28

30

32

34

Flow rate Q [m3/h O2]

Data sheet DDS EM15 - Edition 0318 Subject to alteration without prior notice -2© Spectron Gas ControlAdr.: Systems GmbH Hegdalveien 80, N-3261Larvik | Tlf.: 95 800 700 | e-mail: itec@itec.as | Web: www.itec.asGas Control Systems

| 97

UTTAKSPOST EM15/EE15

EM15 / EE15 Surface-mounted Type AW

ø24

ø4,6(2x) *

31 Surface-mounted tapping point with flow control / shut-off valve

Bore template for installation

Specifications

Technical data

• The surface-mounted tapping point is used for installations into panels independent of the panel

Materials Rear-wall connector:

thickness.

Covers:

• The surface-mounted version consists of a

Connections

rear-wall connector made of brass or stainless

brass or SS 1.4404 (316L) Polypropylene GB30

inlet: outlet:

see ordering info 1/4“-NPT female

Weight

steel respectively, a round faceplate and

*) for self-cutting screw ME-T-50-16-TX25-A2-DIN7500

ca. 0.8 kg

assembly accessories.

Surface-mounted type with valve in the outlet

101

without valve

with valve / without valve (long) Data sheet DES EM15 - Edition 0318 Subject to alteration without prior notice © Spectron Gas Control Systems GmbH 98 | iTec AS

5

13

36

ø46

37

ø26

55,5 34,5

125

54

89

35

Rear wall connector - see page 12

ø70

1/4“-NPT

33

ø26

-3-

57

11

Gas Control Systems

UTTAKSPOST EM15/EE15

EM15 / EE15 Surface-mounted angle Type AE

ø24

ø4,6(2x) *

ø24

55,5

31

Surface-mounted angle tapping point Bore template for installation

with flow control / shut-off valve Specifications

Technical data

• The surface-mounted tapping point is used for installations into panels independent of the panel

Materials Rear-wall connector:

thickness.

Covers:

• The surface-mounted angle version consists of a rear-wall connector made of brass or stainless steel respectively, a round faceplate and

Connections

*) for self-cutting screw ME-T-50-16-TX25-A2-DIN7500

brass or SS 1.4404 (316L) Polypropylene GB30

inlet: outlet:

see ordering info 1/4“-NPT female

Weight

ca. 0.8 kg

assembly accessories.

55,5

104

35

ø70

5

37

13

36

ø26

1/4 NPT

101

ø46

Surface-mounted angle type with valve in the outlet

Rear wall connector - see page 12

• The rear outlet leads back into the panel.

ø26

33

57

11

Data sheet DDS EM15 - Edition 0318 Subject to alteration without prior notice -4© Spectron Gas ControlAdr.: Systems GmbH 80, N-3261Larvik | Tlf.: 95 800 700 | e-mail: itec@itec.as | Web: www.itec.asGas Control Systems Hegdalveien

| 99

UTTAKSPOST EM15/EE15

EM15 / EE15 Panel-mounted Type EP

ø4

7

56

ø2

55,5

ø5,5(2x)

8

Panel-mounted tapping point Bore template for installation

with flow control / shut-off valve Specifications

Technical data

• The panel-mounted tapping point is used for

Materials Inlet adaptor:

installations into panels between 2 and 8 mm thick.

• The panel-mounted version consists of an inlet adaptor made of brass or stainless steel respectively with 1/4”-NPT female thread, a plastic holder, a round faceplate (2-5 mm panel)

brass or SS 1.4404 (316L) Polypropylene GB30 Polypropylene GB30

Holder: Covers: Connections

inlet: outlet:

Weight

1/4“-NPT female 1/4“-NPT female ca. 0.8 kg

and assembly accessories.

Panel-mounted type with valve in the outlet 52

103

ø 46

1/4 NPT

35

40

69

ø 26

1/4 NPT

80

55,5

SW 19

47

40 80

Front view with recommended modular dimensions Data sheet DES EM15 - Edition 0318 Subject to alteration without prior notice 100 | iTec © ASSpectron Gas Control Systems GmbH

42 panel 2-8 mm

Side view with interface dimensions for a panel 2 mm thick

-5-

Gas Control Systems

UTTAKSPOST EM15/EE15

EM15 / EE15 Panel-mounted front Type EF

ø5,5(2x) 8

ø2

3

56

ø4

7

ø2

55,5

47,5

Panel-mounted front tapping point with Bore template for installation

flow control / shut-off valve Specifications

Technical data

• The panel-mounted tapping point is used for

Materials Inlet adaptor:

installations into panels between 2 and 8 mm thick.

brass or SS 1.4404 (316L) Polypropylene GB30 Polypropylene GB30

Holder: Covers:

• The front version consists of an inlet adaptor made of brass or stainless steel respectively with 1/4”-NPT female thread, a plastic holder, a round faceplate (2-5 mm panel) and assembly

Connections

inlet: outlet:

Weight

1/4“-NPT female 1/4“-NPT female ca. 0.8 kg

accessories.

• The outlet is to the front.

Panel-mounted front type with valve in the outlet 47,5

panel 2-8 mm

55,5

SW 19

52

1/4 NPT

27

40

15

80

ø70

26

69

35

1/4 NPT

ø 20 40

120 ø 46

ø 26 148

Front view with recommended modular dimensions

Top view with interface dimensions for a panel 2 mm thick

Data sheet DDS EM15 - Edition 0318 Subject to alteration without prior notice -6© Spectron Gas Control Systems GmbH 80, N-3261Larvik | Tlf.: 95 800 700 | e-mail: itec@itec.as | Web: www.itec.as Gas Control Systems Adr.: Hegdalveien

| 101

UTTAKSPOST EM15/EE15

EM15 / EE15 Ceiling-mounted Type DC

ø24

ø4,6(2x) *

38 Ceiling-mounted tapping point with flow control / shut-off valve

Bore template for installation

Specifications

Technical data

• The ceiling-mounted tapping point is used for

Materials Rear-wall connector P1 up to 40 bar P1 > 40 bar Covers: Washer:

installations at the ceiling.

• The ceiling-mounted version consists of a rear-wall connector made of brass or stainless steel respectively with an 1/4”-NPT female inlet,

Connections

plastic covers, washer, a round faceplate and assembly accessories.

Brass SS 1.4404 (316L) Polypropylene GB30 Polypropylene GB30

inlet: outlet:

1/4“-NPT female 1/4“-NPT female

Weight

Ceiling type with valve in the outlet

*) for self-cutting screw ME-T-50-16-TX25-A2-DIN7500

ca. 1.2 kg

ø70

167

1/4 NPT

2

2

0

ø46

14

37

13

36

without valve

34,5

ø26

54

55,5

ø46

180,7

77,6

8

with valve / without valve (long) Data sheet DES EM15 - Edition 0318 Subject to alteration without prior notice 102 | iTec © ASSpectron Gas Control Systems GmbH

12

1/4 NPT

23

64

57

11

ø26

-7-

Gas Control Systems

UTTAKSPOST EM15/EE15

EM15 / EE15 Column-mounted Type SC Column-mounted type with valve in the outlet

without valve

249

34,5

54

90,5

ø46

395

124

ø26

5

with valve / without valve (long)

Column-mounted tapping point 100

with flow control / shut-off valve Specifications installations on laboratory benches up to

46

• The column-mounted tapping point is used for approx. 90 mm thickness.

• The column-mounted version consists of a metal

G 1/2

ø6x1 (316L)

column body, a metal connector with a tube (6x1 54

mm), plastic washer, plastic covers, a round

14

167 37 13

36

faceplate and assembly accessories. ø46

• The plastic covers of the metal column are acid

ø26

and alkaline solutions resistant.

Technical data

12

Materials Connector: Tube: Column body: Washer: Covers: Connections

SS 1.4404 (316L) SS 1.4404 (316L) Aluminium Polypropylene GB30 Polypropylene GB30 inlet: outlet:

41

57

11

Hole in bench min. 25 mm, max. 30 mm

tube 6x1 mm 1/4“-NPT female ca. 1.8 kg L

Weight

ø46

SW32 ø70

Data sheet DDS EM15 - Edition 0318 Subject to alteration without prior notice -8© Spectron Gas Control Systems GmbH 80, N-3261Larvik | Tlf.: 95 800 700 | e-mail: itec@itec.as | Web: www.itec.as Gas Control Systems Adr.: Hegdalveien

| 103

UTTAKSPOST EM15/EE15

EM15 / EE15 Wall-mounted Type ES

Ø Ø 8 mm ø 88 (2x) (2x)for fürplug Dübel ø 8mm

31

Wall-mounted tapping point with flow control / shut-off valve

Bore template for installation

Specifications

Technical data

• The wall-mounted tapping point is used for

Materials Wall connector:

installations with surface-mounted pipe work.

• The wall-mounted version consists of a metal wall connector to connect both the gas line and the tapping point, a round faceplate and plastic

brass or SS 1.4404 (316L) Polypropylene GB30

Covers: Connections

inlet: outlet:

1/4“-NPT female 1/4“-NPT female

Weight

covers.

Wall-mounted type ES

ca. 1.0 kg

ø70 70

126 12 14

37

13

36

55,5 55,5

54

124,9 124,9

89

ø46

35

1/4 NPT

34,5 35,5 35,5

without valve

ø26

25

with valve / without valve (long) Data sheet DES EM15 - Edition 0318 Subject to alteration without prior notice 104 | iTec ©ASSpectron Gas Control Systems GmbH

58

1/4 NPT

57

11

ø26

-9-

Gas Control Systems

UTTAKSPOST EM15/EE15

VM15 / VE15 Flow control / shut-off valves

ø4,6(2x) *

ø24

ø18

31 *) for self-cutting screw ME-T-50-16-TX25-A2-DIN7500

Flow control / shut-off valve for surface mounting

Bore template for surface mounting (left) and

(angle) and panel mounting (globe version)

panel mounting (right)

Specifications • The ow control and shut-off valves are also available in addition to the laboratory tapping points.

• The vales come as surface- or panel-mounted type.

• There is a globe and an angle version in brass or stainless steel available.

• The vales are suitable for pressure ranges up to 100 bar

Technical data Materials Body, ow control spindle: Valve seat: Diaphragm: Covers: Spring: Connections

inlet: outlet:

40

ø22,8

40

28,7

ø26

57,4

ø26

ø22,8

see page 12

Rear wall connector

57,5

34,5

1/4 NPT

2-5mm 28,7

ø22,8

80

ø26

ø22,8

42

56

*)

28,7

42

28,7

33

92

1/4 NPT

57

33 74

1/4-NPT

ø22,8

ø26

180

Rear wall connector see page 12

P2=10bar

140

P2=8bar

120

ø26

42 34

1/4 NPT

Flow rate Q [l/min. N2]

160

ø46

ø26

1/4-NPT ø22,8

2-5mm 57 1/4 NPT

*)

see drawings below 1/4“-NPT female

Leak rate (to atmosphere) 10-8 mbar l/s He

Valves for surface- and panel mounting ø46

brass or SS 1.4404 (316L) PTFE Hastelloy C276 Polypropylene GB30 Stainless steel 1.4310

100

P2=6bar

80

P2=4bar

60

P2=2bar

40

P2=1,5bar

20 0 0°

60°

120°

180°

240°

360°

420°

480°

Revolutions of the handwheel

540°

Data sheet DDS EM15 - Edition 0318 Subject to alteration without prior notice - 10 © Spectron Gas Control Systems GmbH 80, N-3261Larvik | Tlf.: 95 800 700 | e-mail: itec@itec.as | Web: www.itec.as Gas Control Systems Adr.: Hegdalveien

| 105

UTTAKSPOST EM15/EE15

AM15 / AE15 Wall outlets

ø24

ø4,6(2x) *

31 Surface-mounted wall outlets tlets

Bore template for wall outlet (surface-mounted)

(angle and globe version)

*) for self-cutting screw ME-T-50-16-TX25-A2-DIN7500

Specifications

Technical data

• The wall outlets are also available in addition to

Materials Body:

the laboratory tapping points.

• The outlets come as surface-mounted type.

brass or SS 1.4404 (316L) PTFE Polypropylene GB30 SS 1.4310

Valve seat: Covers: Spring:

• There is a globe and an angle version in brass or stainless steel available.

Connections

inlet: outlet:

see drawings below 1/4“-NPT female

Leak rate (to atmosphere) 10-8 mbar l/s He

Wall outlet (globe and angle version)

ø 46

57,5

ø26

57,5

34

ø26

42

ø46

ø26

see page 12

see page 12

Rear-wall connector

Rear-wall connector

*)

34,5

34,5

ø26

1/4 NPT

*)

42

1/4 NPT

34

*) for self-cutting screw ME-T-50-16-TX25-A2-DIN7500

Data sheet DES EM15 - Edition 0318 Subject to alteration without prior notice 106 | iTec © ASSpectron Gas Control Systems GmbH

- 11 -

Gas Control Systems

UTTAKSPOST EM15/EE15

EM15 / EE15 Rear-wall connectors L7

L30

NPT

Rear-wall connectors (for surface-mounting AW and AE) with integrated shut-off valve Bore template and dimensions 1/4“-NPT female / 7 mm wall thickness (rear installation) 19,5

5 M

ø18

G 3/8

ø19

1/4NPT

M4

ø3 1 ø3

9,5

8

thickness) 7 (wall (Wandstärke)

35

13

ø4 7

37,5

1/4“-NPT female / 30 mm wall thickness (rear installation) 42,5

5 M

G 3/8

ø18

1/4NPT

ø 19

M4

ø3 1 ø3

9,5

8

thickness) 30 (wall (Wandstärke)

35

13

ø4 7

60,5

1/4“-NPT female + M24x1 male (front installation) SW 20 ø 41,8

3

G 3/8

31

ø4,6(2x)

SW 20(2x) 1/4 NPT

ø24

M5

25

ø24

M24x1 31

38

31 Data sheet DDS EM15 - Edition 0318 Subject to alteration without prior notice - 12 © Spectron Gas Control Systems GmbH 80, N-3261Larvik | Tlf.: 95 800 700 | e-mail: itec@itec.as | Web: www.itec.as Gas Control Systems Adr.: Hegdalveien

| 107

UTTAKSPOST EM15/EE15

EM15 / EE15 Ordering information Ordering information: Tapping points EM15 / EE15 series

EM 15 - AW - 10 - 0 - V - Ar/H2 Material

Gas type

M

Brass

Please specify with order

E

Stainless steel

Outlet

Type AW

Surface-mounted

AE

Surface-mounted angle version

EP

Panel-mounted

EF

Panel-mounted front

DC

Ceiling-mounted

SC

Column-mounted

ES

Wall-mounted

GG

Basic regulator w/o rear-wall conn. (G 3/8” RH)

Pressure range 1,0

max. outlet pressure 1,0 bar

1,5

max. outlet pressure 1,5 bar

2,5

max. outlet pressure 2,5 bar

5

max. outlet pressure 5 bar

10

max. outlet pressure 10 bar

16

max. outlet pressure 16 bar (piston version up to P1,max. = 100 bar)

25

max. outlet pressure 25 bar (piston version up to P1,max. = 100 bar)

65

max. outlet pressure 65 bar (piston version up to P1,max. = 100 bar)

0

Rear-wall connector incl. shut-off valve without pressure regulator

0 CM3/6/...

CE3/6/...

SM SE CSM(E) FS

1/4“-NPT female Compression ring brass [DN] Compression ring SS [DN] Hose connector brass Hose connector SS Compr. ring+hose connector Flashback arrestor

L LCM3/6/...

LCE3/6/...

LSM LSE LCSM(E)

1/4"-NPT female (long) Compression ring brass [DN] Compression ring SS [DN] Hose connector brass Hose connector SS Compr. ring+hose connector

V VCM(E)6 VSM(E) VCSM(E)

Valve (1/4"-NPT female) Valve with compression ring Valve with hose connector Valve + compression ring and hose connector Blind w/o pressure regulator

B

Inlet 0 0 L7 L30 NPT

CM6/8/...

CE6/8/...

CM(E)6w RS X

EP/EF: 1/4"-NPT female DC/ES: 1/4"-NPT female AW/AE: 1/4“-NPT f / 7 mm AW/AE: 1/4“-NPT f / 30 mm AW/AE: 1/4"-NPT female + M24x1 male Compression ring brass [DN] Compression ring SS [DN] angle compression ring [DN] SC: SS-tube stub 6x1mm without rear-wall connection

Ordering information: Valve / Wall outlet

VM 15 - AW - 0 - EV - 0 - Ar/H2 Model V A

Gas type (see above) Valve Wall outlet

Outlet (see above)

Material M E

Version

brass Stainless steel

DV EV

Type

Inlet (see above)

see above GG Basic unit w/o rear-wall conn. (G 3/8” RH) Data sheet DES EM15 - Edition 0318 Subject to alteration without prior notice 108 | iTec © ASSpectron Gas Control Systems GmbH

Globe version Angle version

- 13 -

Gas Control Systems

UTTAKSPOST EM55 SPECTROLAB PLUS ÂŽ

Spectrolab plus Configurations / Overview

spectro lab

Basic unit with integrated shut-off-valve, pressure regulator and pressure gauge; pressure ranges, flow charts, materials, dimensions

Basic unit

Type GG

Ordering information

page 3 page 11

Laboratory equipment with rear-wall inlet and front outlet; Connectors, materials, dimensions / drawing / template

Surface-mounted systems

Type AW

Ordering information

page 4 page 11

Laboratory equipment with rear-wall inlet and rear-wall outlet; Connectors, materials, dimensions /drawing / template

Panel-mounted systems

Type EP

Ordering information

page 5 page 11

Laboratory equipment with top inlet and front outlet; Connectors, materials, dimensions / drawing / template

Ceiling-mounted systems

Type DC

Ordering information

page 6 page 11

Column-mounted laboratory equipment (bottom inlet, front outlet); Connectors, materials, dimensions / drawing / template

Column-mounted systems

Type SC

Ordering information

page 7 page 11

Wall-mounted laboratory tapping points (surface-mounted pipework); Connectors, materials, dimensions / drawing / template

Wall-mounted systems

Type ES

Ordering information

page 8 page 11

Flow control valves in different configurations; Connectors, flow charts, materials, dimensions / drawings / template

Flow control valves

page 9

Ordering information

page 11

In-/outlet fittings, hose connectors, wall outlets, etc.; Materials, dimensions

Accessories Ordering information

Data sheet DES Spectrolab Plus Edition 0413 - 700 | e-mail: itec@itec.as | Web: www.itec.as Adr.: Hegdalveien 80, N-3261Larvik | Tlf.: -952800

page 10 page 10

| 109

UTTAKSPOST EM55 SPECTROLAB PLUS ®

Spectrolab plus

spectro lab

Basic unit Type GG

113 103

48.5

5

10

Ø 50

48.5

N2

145

72

N2

on

220 psi

44.5

0

bar

Kl.2,5

15

1/4-NPT

33

Coupling nut G3/8" RH-LH

20

50 94

(from front to center of outlet)

Basic unit brass up to 10 bar with adapter 1/4” NPT

Specifications © • Spectrolab plus - systems incorporate the functions shut-off, pressure regulation and pressure indication in one compact, ergonomic unit.

• The pressure regulator is diaphragm sensed for outlet pressures up to 10 bar and piston sensed for higher outlet pressure values.

• The acetone resistant pressure gauge is safely integrated into the adjusting handwheel to create an extremely compact device.

• The diaphragm-type shut-off valve engages in the open and closed position respectively and has an additional indicator on the adjusting knob.

• All gas-wetted components have undergone the special SPECTROCLEAN© cleaning process and have been thoroughly baked out.

• For ECD-applications the devices can be treated in an extended cleaning process.

• All equipment has been 100%-helium-leak-tested using a mass-spectrometer.

• All components are plastic-coated resistant to acid and alkaline solutions.

Technical data Materials Body: M55: brass or E55: SS 316L (1.4404) Diaphragms: Hastelloy C276 Other gas-wetted brass or surfaces: SS 316L (1.4404) Valve stem: SS 316L (1.4404) Valve seat: PTFE Body coating: Polypropylene GF30 Leak rate (to atmosphere): 10-8 mbar l/s He Pressure ranges Inlet pressure P1 (P <= 10 bar): 40 bar max.

(P >10 bar): 60 bar max. max. outlet pressure P2: 1,5 / 5 / 10 / 50 bar see flow charts Flow rates (P up to 10 bar): 700 (SS)-750g (brass) Weight 800 (SS)-850g (brass) (P > 10 bar): Connectors/Porting Inlet: G 3/8” RH female Outlet: 1/4”-NPT-female 2

2

2 2

©

0

Line press. P2 [ bar ]

P1=10 bar

0,5

1

P1=7 bar

1,5 P1=4 bar

2

2,5

10 9 8 7 6 5 4 3

0

2

4

P1=16 bar

6 P1=11 bar

Line press. P2 [ bar ]

0 P1=11 bar

Spectrolab plus © SS / Brass - line press. P2 up to 10 bar

P1=21 bar

8

10

12

14

Flow rate Q [ m³/h O2 ]

110 | iTec Data AS sheet DES Spectrolab Plus Edition 0413

Spectrolab plus SS / Brass - line press. P2 up to 5 bar

5 4,5 4 3,5 3 2,5 2 1,5 1 0,5 0

3

Flow rate Q [ m³/h O2 ] Line press. P2 [ bar ]

Line press. P2 [ bar ]

©

Spectrolab plus SS / Brass - line press. P2 up to 1,5 bar

1,6 1,4 1,2 1 0,8 0,6 0,4 0,2 0

2 P1=8 bar

3

4 P1=6 bar

5

6

7

8

9

Flow rate Q [ m³/h O2 ]

Spectrolab plus © SS / Brass - line press. P2 up to 50 bar

50 45 40 35 30 25 20 15 10

0 P1=60 bar

-3-

1

5 P1=45 bar

10

15

P1=30 bar

Flow rate Q [ m³/h O2 ]

20

25

UTTAKSPOST EM55 SPECTROLAB PLUS ®

Spectrolab plus

spectro lab

Surface-mounted Type AW

Rear-wall connector with tube stub 8x1:

47 38

ø 18 G 3/8"

46

M5 L

21

Notice: Do not use rear-wall connectors with Cutubes for acetylene!

8 x1

Rear-wall connector with NPT-female thread:

47 38

Basic unit c/w flow control valve (outlet 1/4”-NPT-female) and surface-mounting kit

Specifications © • The surface-mounting kit for Spectrolab plus systems is used for installations into panels between 2 mm and 8 mm.

• The mounting kit consists of a rear-wall connector made of brass or stainless steel respectively, a round fascia plate and small parts for the assembly (screws etc.).

• The rear-wall connector either has a 1/4”-NPT female thread or a tube (copper or stainless steel respectively) on the inlet side.

M5

1/4"-NPT

ø 18 G 3/8"

14

46

21

operator side panel

Technical data Materials: Rear-wall connector:

brass + Cu-tube or SS 316L (1.4404) Fascia plate: Polypropylene Connectors/Porting: Outlet: 1/4”-NPT female Inlet thread: 1/4”-NPT female Inlet tube: Tube 8 x 1 mm Tube length L: 750 mm (Cu-tube) 510 mm (SS 316L)

Surface-mounting equipment for panels from 19-25 mm thickness: For panels between 19 and 25 mm thickness an extension of the rear-wall connector has to be used. Available in brass or in stainless steel 316L. The minimum required bore for the extended rear-wall connector is 21 mm.

17

G 3/8" ø 21

Figure: Complete surface-mounting kit (mounted position)

G 3/8"

26.5

Data sheet DES Spectrolab Plus Edition 0413 - 700 | e-mail: itec@itec.as | Web: www.itec.as Adr.: Hegdalveien 80, N-3261Larvik | Tlf.: -954800

| 111

UTTAKSPOST EM55 SPECTROLAB PLUS ®

Spectrolab plus

spectro lab

Panel-mounted systems Type EP

90

50

Ø

N2

(48.5)

74

48.5

5

10

61.5 Ø

145

72

.5

5.5

Ø5

135

off 220 bar

Kl.2,5

15

2

+1

psi

0

30

Ø

25

Ø

63

63

Ø5

N2

40

Left: Panel-mounting kit c/w basic unit - front view with recommended dimension for multiple installations.

Right: Bore template for the installation

Panel-mounting kit c/w basic unit and flow control valve (mounted position)

Specifications ©

• The panel-mounting kit for Spectrolab plus systems is used for installations into panels between 2 and 8 mm thick.

• The panel-mounting kit consists of an inlet adaptor with 1/4”-NPT female thread, an (internal) plastic holder, a plastic fascia plate and small parts for the assembly (screws, stickers etc.).

Technical data Materials: Inlet adaptor: Holder: Fascia plate: Connectors / Porting: Inlet: Outlet:

Brass or SS 316L (1.4404) Polypropylene GF30 Polypropylene G 3/8” RH female 1/4”-NPT female

Installation examples panel-mounting systems:

80

42

75

Coupling nut G3/8"RH-LH

48.5

G 3/8” RH

Coupling nut G3/8"RH-LH

48.5

G 3/8” RH

42

36

36 2 mm panel

65

1/4-NPT

1/4-NPT

65

on

49

8 mm panel

Basic unit c/w flow control valve (outlet 1/4”- NPT-female) and panel-mounting kit.

Interface dimensions for a panel 2 mm thick

112 | iTec Data AS sheet DES Spectrolab Plus Edition 0413

44

Basic unit c/w flow control valve (outlet 1/4”-NPT-female) and panel-mounting kit.

Interface dimensions for a panel 8 mm thick

-5-

UTTAKSPOST EM55 SPECTROLAB PLUS ®

Spectrolab plus

spectro lab

Ceiling-mounted systems Type DC

Ø 18

ca. 92

ca. 36

30°

ca. 20

4

1/4-NPT

ca. 142

on

Ø

50

PT

-N

1/4

65

Basic unit c/w flow control valve (outlet 1/4”-NPT female) and ceilingmounting kit.

Specifications ©

• The ceiling-mouting kit for Spectrolab plus systems is used for installations the ceiling.

• The ceiling-mounting kit consists of a rear-wall connector, a plastic cover (two parts), a plastic washer and small parts for the assembly (screws, nuts etc.).

• The rear-wall connector has a 1/4”-NPT female thread on the inlet side.

Basic unit c/w flow control valve and ceiling-mounting kit (mounted position)

Technical data Materials: Rear-wall connector: Cover: Washer: Connectors/Porting: Inlet: Outlet:

Brass or SS 316L (1.4404) Polypropylene GF30 Polypropylene GF30 1/4”-NPT female 1/4”-NPT female

Ceiling-mounting systems - Bore template (view from the top)

Ceiling-mounting kit (mounted position)

38

ø 18

ø 5.5

For ceilings thicker than 6 mm longer fastening screws are required!

Data sheet DES Spectrolab Plus Edition 0413 - 700 | e-mail: itec@itec.as | Web: www.itec.as Adr.: Hegdalveien 80, N-3261Larvik | Tlf.: -956800

| 113

UTTAKSPOST EM55 SPECTROLAB PLUS ®

Spectrolab plus

spectro lab

Column-mounted systems Type SC

ca. 158,5

65

ca. 230

on

120

30°

Hole in bench min. 25 mm, max. 30 mm Notice: Do not use columnmounted system with Cu-tubes for acetylene!

100 L Basic unit c/w flow control valve (outlet 1 / 4 ” - N P T- f e m a l e ) a n d c o l u m n mounting kit

Ø 15 G 1/2”

8x1

Specifications ©

• The column-mounting kit for Spectrolab plus systems is used for bench-mounting installations up to approx. 90 mm thickness.

• The column-mounting kit consists of a metal column body, a metal connector with a tube (8x1 mm), a plastic washer, a plastic cover and small parts for the assembly.

• The column body is plastic-coated and resistant to acid and alkaline solutions.

PT

”-N

1/4

Technical data Materials Connectors: Column body: Washer, coating: In- / Outlets Inlet: Outlet: Installation length L Brass (c/w Cu-tube): Brass (c/w SS-tube): SS 316L:

Basic unit c/w flow control valve and column-mounting kit (mounted position)

Brass + Cu-tube or SS 316L (1.4404) Aluminium Polypropylene GF30 tube 8 x 1 mm 1/4”-NPT female approx. 700 mm approx. 475 mm approx. 475 mm

G 3/8" RH

min. ø 25

For a column-type installation into laboratory furniture a bore of at least 25 mm diameter is required.

Column-mounting kit (mounted position)

114 | iTec Data AS sheet DES Spectrolab Plus Edition 0413

-7-

UTTAKSPOST EM55 SPECTROLAB PLUS ®

Spectrolab plus

spectro lab

41

Tapping points Type ES

(mounting holes)

40

16

100

1/4"-NPT

80

G 3/8" RH

Basic unit c/w globe-type flow control valve (outlet 1/4”-NPT-female), wallmounting kit and inlet fitting

Specifications © • The wall-mounting kit for Spectrolab plus systems is used for installations with surface-mounted pipework • The wall-mounting kit consists of a plastic wallcover, a plastic space cover, small parts for the assembly (screws, washers etc.) and a wall connector to connect both the gas line and the Spectrolab© plus device.

Technical data Materials: Wall connector:

Brass or SS 316L (1.4404) Wall cover: Polypropylene Space cover: Polypropylene Connections/Porting: Inlet: 1/4”-NPT female Outlet: 1/4”-NPT female

Example tapping point

Wall-mounting kit c/w inlet fitting

Basic unit c/w outlet adaptor (1/8”-male to 1/4-18 NPT-female), wallmounting kit and inlet fitting

Data sheet DES Spectrolab Plus Edition 0413 - 700 | e-mail: itec@itec.as | Web: www.itec.as Adr.: Hegdalveien 80, N-3261Larvik | Tlf.: -958800

| 115

UTTAKSPOST EM55 SPECTROLAB PLUS ®

Spectrolab plus

spectro lab

Flow control valves

Top: Angle type flow control valve (outlet 1/4”-NPT female) c/w coupling nut.

Right: Globe-type flow control valve (outlet 1/4”-NPT female) c/w coupling nut.

Left figure: Angle-type flow control valve (outlet 1/4”-NPT female) c/w rear-wall connector, coupling nut and plastic fascia plate Right figure: Globe-type flow control valve (outlet 1/4”-NPT female) c/w rear-wall connector, coupling nut and plastic fascia plate

Technical data Materials: Body, flow control spindle:

Specifications © • The Spectrolab plus - flow control valve is either used as part of the basic unit (fig. 1a/b), as a panelmounted valve (fig. 2a/b, w/o basic unit) or as a tapping-point flow control valve (fig. 3a/b, w/o basic unit). © • The Spectrolab plus - flow control valve is available in globe- (a) and in angle-configuration (b) in brass or in stainless steel 316L.

Valve seat: Diaphragm: Body coating: Spring: Connectors/Porting: Inlet: Outlet: Leak rate (to atmosphere): Flow rates:

Fig. 1a/b: Globe-/Angle- flow control valve for the basic unit Fig. 2a/b: Globe-/Angle- valve (panel-mounting EP) Fig. 3a/b: Globe-/Angle- valve (tapping point)

fig. 1a:

Brass or SS316L (1.4404) PVDF Hastelloy C276 Epoxy coated SS (1.4310) see drawings below 1/4”-NPT female 10-8 bar cm³/s He see flow chart (fig. 4)

fig. 4: 1/4"-NPT

1/8"-NPT

120

P2=10 bar

110 100

P2=8 bar

Flow rate Q [ l/min air ]

90

fig. 1b:

80 P2=6 bar

70 60

P2=4 bar

50 40

P2=2 bar P2=1,5 bar

30

1/4"-NPT

20 10 0

116 | iTec Data AS sheet DES Spectrolab Plus Edition 0413

180°

240° 300° 360° Revolutions of the handwheel fig. 3a:

ca. 3 mm 1/4"-NPT

-9-

480°

540°

fig. 3b:

1/4"-NPT

ca. 48 mm

420°

G 3/8" LH

120°

G 3/8" LH

1/4"-NPT

ca. 3 mm

ca. 48 mm

1/4"-NPT

min. 16,5

1/4"-NPT

fig. 2b:

fig. 2a:

60° min. 16,5

0°

1/8"-NPT

1/4"-NPT

UTTAKSPOST EM55 SPECTROLAB PLUS ®

Spectrolab plus Accessories

spectro lab fig. 1

In- / outlet fittings Compression ring fittings 1/4”-NPT external thread to tube-diameter: 3 mm, straight 6 mm, straight 8 mm, straight 10 mm, straight 3 mm, angle 6 mm, angle 8 mm, angle

part no.: Brass: 0.291.284 0.291.283 0.049.106 0.291.282 0.291.317 0.291.316 0.049.107

SS: 0.291.281 0.291.280 0.049.033 0.291.279 0.291.320 0.291.319 0.049.035

fig. 1

Hose connectors

fig. 2 Brass:

6 mm tube stub (for compression ring fitting) 1/4”-NPT male

SS:

0.400.032 0.400.031 717.02219 717.02218 (chrome plated)

fig. 2

Flashback arrestor (for fuel/flammable gas) For fuel/flammable gas applications (Outlet 1/4”-NPT female)

fig. 3a

Brass: 717.05888

Wall outlets fig. 3a

fig. 3b

Wall-outlet (outlet 1/4”-NPT female)

fig. 3b Brass: 717.07261

SS: 717.07262 (90°-angle)

Adaptors fig. 4a

fig. 4b

a) Extension rear-wall-connector b) Outlet adaptor 1/8”-NPT male to 1/4”-NPT female

fig. 4a, b Brass: 717.07167

SS: 717.07168

717.07163

717.07164

Levers, Gas type labels fig. 5a

fig. 5b

a) Levers 717.08591 b) Gas type labels: C2H2, N2O, CB, NH3, CO2, DL: 717.08770 CH4, CH4/Ar, H2/N2, H2/He, W1,W2: 717.08771 Ar/H2, additional gases W3,W4: 717.08772 CA(compressed air), SA(syntetic air): 717.08773 Ar: 717.08972 He: 717.08973 O2: 717.08974 H2: 717.08975 SL: 717.08976 N2: 717.08977 CO2: 717.08978 CO: 717.08958 BA: 717.08959 C2H4: 717.09660

fig. 5a, b

(includes one label for the pressure regulator and one for the valve)

Data sheet DES Spectrolab Edition 0413 10800- 700 | e-mail: itec@itec.as | Web: www.itec.as Adr.: Plus Hegdalveien 80, N-3261Larvik | Tlf.:-95

| 117

UTTAKSPOST EM55 SPECTROLAB PLUS ®

Spectrolab plus

spectro lab

Ordering information

Ordering example: © E 55 series laboratory system Spectrolab plus Ordering example inlet: Rear-wall-connector with 1/4” NPT-female thread

E M 55 - AW - 10 - 0 - CV - Ar/H2 Material ME-

Gas type Please specify with your order

Brass Stainless steel

Outlet 1/4”-NPT-female 0 CM3,6... Compression ring brass [Dn] CE3,6... Compression ring stainless steel [Dn] Hose connector brass SM Hose connector stainless steel SE CSM(E) Comp. ring fitting c/w hose connector Control valve only CV VCM(E)6 Valve c/w comp. ring fitting VSM(E) Valve c/w hose connector VCSM(E) Valve c/w comp. ring and hose connector

Configuration type GG AW EP DC SC ES -

Basic unit Surface-mounted Panel-mounted Ceiling-mounted Column-mounted Wall-mounted

Pressure range 1,5 5 10 50 -

max. outlet press. 1,5 bar max. outlet press. 5 bar max. outlet press. 10 bar max. outlet press. 50 bar Note: Not all combinations are available!

Please refer to the data sheet for the respective configuration! - Especially for acetylene applications the rear-wall connector with copper tubing must not be used!

Inlet G3/8”-female 0 1/4”-NPT female NPT CM3,6... Compr. ring brass [Dn] CE3,6... Compr. ring stainless steel [Dn] CM(E)6wAngle compr. ring [Dn] Tube stub 8 x 1 mm RS

Ordering example:

55 series Valve Spectrolab© plus Ordering example inlet: Rear-wall-connector with 1/4” NPT-female thread

V M 55 - AW - 0 - EV - 0 - Ar/H2 Materials (see above)

Gas type (see above)

Configuration (s. a.)

Outlet (see above)

Inlet (see above)

Valve type DV EV -

Globe valve Angle valve

Ordering example:

55 series wall-outlet Spectrolab© plus A M 55 - AW - 0 - 0

Ordering example inlet: Rear-wall-connector with 1/4” NPT-female thread

Materials (see above)

Outlet (see above)

Configuration

Inlet (see above)

AW -

Wall-mounted only

118 | iTec Data AS sheet DES Spectrolab Plus Edition 0413

- 11 -

UTTAKSPOST EM65-AC

Tapping point EM65-AC

spectro lab

Flow rates EM65-AC 3 Acetylene Flow rate [m /h] Inlet presure (P1) @ outlet pressure (P2) [bar]

[bar]

0,3

0,5

1

1,3

0,2

0,5

1

Tapping point EM65-AC

Product features • Wall-mounting tapping point for acetylene • Laboratory-style design • Ergonomically designed • Filter at the process gas inlet valve • Diaphragm-type shut-off valves optimised for low internal volume • Pressure regulator with high control accuracy • Designed for easy installation • Tapping point can be extended into multiple tapping points • Safety devise (flashbach arrestor) in the outlet

Technical data Inlet pressure P1 Outlet pressure P2 Materials Body regulator and valves: Valve seat regulator: Diaphragm regulator: Diaphragm valve: Filter: Connectors Temperature range Leak rate Pressure gauges Weight

max. 1,5 bar 1,5 bar

brass PA EPDM Hastelloy C276 Sintered SS 316L 1/4”-NPT female -30oC to +60oC < 10-3 mbar I/s He Safety pressure gauges ISO5171/Kl1.6/NG50 2,6 kg

106 (without plugs: 100)

218

20

71

48

143

Spectron Gas Control Systems GmbH Data sheet DES EM65-AC - Edition 1115 Fritz-Klatte-Str. 8, D-65933 Frankfurt Subject to alteration without prior notice Adr.: Hegdalveien | Tlf.: 95 800 700 | e-mail: itec@itec.as | Web: www.itec.as Tel.: +49 (0)69 38016-0, Fax: +49 (0)69 38016-200 © Spectron Gas Control Systems GmbH 80, N-3261Larvik info@spectron.de www.spectron.de

| 119

TILBEHØR Flowmeter FLM32

Flowmeter FLM32

spectro lab

Ablesung an hoechster Stelle der Kugel au o pe n

zu/c

lo

1/4”-NPT

d se

f/

Flowmeter FLM32

1/4”-NPT 61.5

36

Product features • Flowmeter for use on pressure regulators with inert high-purity gases up to quality 6.0 for exact adjustment and indication of the flow rate • Laboratory-style design • Ergonomical and compact design • With integrated control valve

ca. 130

Dimensions

Technical data Inlet pressure (2 types): Materials Body: Soft goods: Flowmeter: Outer tube: Control spindle: Connectors Inlet: Outlet: Temperature range Leak rate (to atmosphere) Weight

1,4 or 4 bar resp. chrome-plated brass Viton (FKM) glass Polycarbon Stainless steel 1/4”-NPT male 1/4”-NPT female -30°C to +60°C 1x10-6 mbar I/s He ca. 0,4 kg

Table of flow rates for FLM32 with %-scale at 1,4 bar and 4 bar resp.

Flow rates at full scale (blue figures for a calibrating pressure of 1,4 bar) Inlet pressure (bar gauge) [bar] 0,5 1 1,4 2 2,5 3 3,5 4

l/h nitrogen at a calibrating pressure 4 bar 1,4 bar 164 237 190 274 208 300 232 251 268 285 300 -

Example: gas type nitrogen With an outlet pressure of 1,4 bar set at the pressure regulator the control valve is opened until the top of the ball is level with the 100% mark on the metering glass. Now 300 l/h N2 flow through the flowmeter.

At 50 % this means 150 l/h etc. The setting should not be below the 10% mark.

For Outlet pressure values PSOLL below the calibrating pressure PKAL the 100%-flow rate may be calculated using Equation a), where the pressure values must be applied in absolute pressure values.

For other gas types the 100%-flow rate for the applicable outlet pressure and calibrating pressure can be calculated from the N2 flow rate using Equation b).

The factor f2 (see table) can be calculated using

Equation a) Q = f1 x Q100% with f1 = P

P SOLL P KAL

f2 =

where density reference gas is the density of nitrogen.

absolute

For other gases: Equation b) Q = f2 x QN2

Data sheet DES FLM32 - Edition 1014 Subject to alteration without prior notice © Spectron Gas Control Systems GmbH 120 | iTec AS

density reference gas density process gas

factor f2 synth. air CO2 methane oxygen

0.983 0.792 1.32 0.965

argon hydrogen helium

0.837 3.75 2.63

Spectron Gas Control Systems GmbH Fritz-Klatte-Str. 8, D-65933 Frankfurt Tel.: +49 (0)69 38016-0, Fax: +49 (0)69 38016-200 info@spectron.de www.spectron.de

TILBEHØR Flowmeter FLM32

Flowmeter FLM32

spectro lab

31

1/4”-NPT

ca. 130

Sectional drawing

1/4”-NPT 62

33.5

d se

au

f/

o pe n

zu/c lo

Ablesung an hoechster Stelle der Kugel

Ordering information: Flowmeter FLM32

FLM32 - 1,4 Series

Calibrating pressure

FLM32 - Flowmeter FLM32

1,4 - 1,4 bar 4 - 4 bar

Specifications

Important note regarding component selection

• SPECTROLAB - components guarantee maximum quality by using high grade materials and a quality assurance program acc. to ISO 9001.

• In order to assure safe operation it is essential to take the configuration of the whole system into account when selecting a control valve.

• All components which come into contact with the medium are cleaned in an ultrasonic cleaning system (CFC-free) with the special cleaning ® process SPECTRO-CLEAN and are then baked out.

• The function of the valve, the compatibility of the materials, correlating temperature ranges, correct installation, operation and maintenance in accordance with the relevant regulations are the responsibility of the system designer and the user.

• SPECTROLAB - components undergo a 100% Helium-leak-test.

Spectron Gas Control Systems GmbH Data sheet DES FLM32 - Edition 1014 Fritz-Klatte-Str. 8, D-65933 Frankfurt Subject to alteration without prior notice Adr.: Hegdalveien 80, N-3261Larvik | Tlf.: 95 80038016-0, 700 | e-mail: itec@itec.as | Web: www.itec.as Tel.: +49 (0)69 Fax: +49 (0)69 38016-200 © Spectron Gas Control Systems GmbH info@spectron.de www.spectron.de

| 121

TILBEHØR Pigtails og Braketter

spectro lab

Pigtails / Cylinder brackets

Dimensions standard-pigtail with manual connection (200 bar)

25

135

Pigtail SR-200-DIN 10-N2 with 200 bar manual connection for DIN-cylinder valves (for non-corrosive gases)

Product features • Stainless steel-pigtail for the connection of a gas cylinder to BE/BM series pressure control panels • For gases up to quality 6.0 • 4 windings for high flexibility in all directions • Manual cylinder valve connector for easy installation and cylinder change without tools (for CEN-connections and for DIN-connectors for non-corrosive gases only) • Compact pigtails also suitable for gas cabinets or applications with other space constraints

W21,8x1/14"LH

250

350

SW30

21

200

Technical data Nominal pressure Nominal size Materials Nut (for non-corrosive gases) Leak rate Cylinder connection Cylinder gasket Outlet connection

38

200 / 300 bar 4 mm SS 1.4571 (SS 316) brass < 10-8 mbar l/s He acc. to international standards and gas type depending on gas type compression ring fitting 6 mm (stainless steel)

Valve connector types:

Cylinder valve connector with knurled handwheel for valves acc. to DIN 477 (for non-corrosive gases only)

Data sheet DES SR Edition 1112 Subject to alteration without prior notice 122 | iTec © ASSpectron Gas Control Systems GmbH

Cylinder valve connector with knurled nut for 300 bar (CEN-connectors)

Spectron Gas Control Systems GmbH Fritz-Klatte-Str. 8, D-65933 Frankfurt Tel.: +49 (0)69 38016-0, Fax: +49 (0)69 38016-200 info@spectron.de www.spectron.de

1/4”-NPT-connector with internal thread for the installation of individual cylinder connectors (EURO-pigtail)

TILBEHØR Pigtails og Braketter

spectro lab

Pigtails / Cylinder brackets

Additional configurations upon request!

Ordering information: Pigtails for BM/BE series pressure control panels

SR - 200 - DIN 10 - N2 Gas type

Type SR - pigtails for BM/BE series pressure control panels

Please specify gas type (gasket material selection)

Nominal pressure Cylinder connection

200 - max. 200 bar 300 - max. 300 bar (CEN)

Detailled description of the cylinder connection (e. g. BS no. 3 for 200 bar or ISO 30 for 300 bar)

Product features cylinder brackets:

70

• Cylinder bracket to protect gas cylinders against falling and to position the cylinder • Suitable for 20-ltr- and 50-ltr gas cylinders

240 15

approx. 785

Depth T

cast aluminium, blasted Chain: zink-plated Steel 20 l cylinder: 130 mm Depth T 50 l cylinder: 180 mm 718.32028 Ordering no.

87

9

Technical data Materials Bracket:

Figures: Cylinder bracket in front and top view Figure right: Chain

Specifications

Manual connectors

• SPECTROLAB - pigtails guarantee maximum quality by using high grade materials and a quality assurance program acc. to ISO 9001.

• All pigtails with DIN cylinder connections for noncorrosive gases and the pigtails with 300 bar (CEN-) connectors come with manual connectors (DIN: plastic handwheel on hex nut; CEN: knurled nut). Pigtails with connectors acc. to other standards come with a hex nut.

• All components which come into contact with the medium are cleaned in an ultrasonic cleaning system (CFC-free) with the special cleaning process SPECTRO-CLEAN® and are then baked out.

• SPECTROLAB - components undergo a 100% function- and Helium-leak-test.

Important note regarding component selection • In order to assure safe operation it is essential to take the configuration of the whole system into account when selecting a pressure regulator.

• The function of the regulator, the compatibility of the materials, correlating temperature ranges, correct installation, operation and maintenance in accordance with the relevant regulations are the responsibility of the system designer and the user.

Spectron Gas Control Systems GmbH Data sheet DES SR Edition 1112 Fritz-Klatte-Str. 8, D-65933 Frankfurt Subject to alteration without prior notice Adr.: Hegdalveien 80, N-3261Larvik | Tlf.: 95 800 700 |Fax: e-mail: | Web: www.itec.as Tel.: +49 (0)69 38016-0, +49 itec@itec.as (0)69 38016-200 © Spectron Gas Control Systems GmbH info@spectron.de www.spectron.de

| 123

TILBEHØR Høytrykksslanger HDS

spectro tec

High pressure hoses HDS Product features

Technical data

• Quality high pressure hoses for non-corrosive industrial gases, oxygen and acetylene • 90° elbow on inlet • Design in all essential points according to DIN EN ISO 14113 (Rubber and plastics hose) • Design in all essential points according to EN ISO 10380 (Corrugated metal hose) • Anti-whip cord (not for acetylene) • Non-return-valve at cylinder- or bundle connection for acetylene to avoid air getting into the hose

max. 300 bar max. 25 bar (Acetylene) DN 6 - DN 12 0,5 - 3,5 m

Working pressure P Nominal diameter Length Materials Industrial gases Inner surface: Outer surface: Reinforcement: Fitting: Oxygen: Acetylene: Connections Inlet:

Polyester Polyurethane Aramid fibre 1.4305 stainless steel rubber cylinder connection or 1/4”-NPT female 1/4”-NPT female -20°C to +60°C -3 <10 mbar l/s He

Outlet: Temperature range Leak rate

High pressure hose HDS - PE for industrial gases except oxygen and acetylene

Ordering information: High pressure hose for industrial gases except oxygen and acetylene HDS - PE

HDS - PE - 300 - 3,5M - DIN 477-6 - 0 - CM 1/4 Pressure range

Outlet

200 - 200 bar 300 - 300 bar

Compression fitting (brass) CM 1/4 - 1/8” / 1/4” / 1/2” CM 6 - 3 / 6 / 8 / 10 / 12 mm Compression fitting (stainless steel) CE 1/4 - 1/8” / 1/4” / 1/2” CE 6 - 3 / 6 / 8 / 10 / 12 mm

Length 0,5M 1M 2M 3,5M

- 0,5 meter (DN 8) - 1,0 meter (DN 8) - 2,0 meters (DN 8) - 3,5 meters (DN 8)

KK 1/2 - G 1/2” bull nose+union nut 0 - 1/4”-NPT female

Inlet

Cylinder connection

Cylinder- or bundle connection: Specify relevant standard and connection type required

0 M

Data sheet DES HDS - Edition 1216 Subject to alteration without prior notice 124 | iTec © ASSpectron Gas Control Systems GmbH

- brass - chrome plated brass

Spectron Gas Control Systems GmbH Fritz-Klatte-Str. 8, D-65933 Frankfurt Tel.: +49 (0)69 38016-0, Fax: +49 (0)69 38016-200 info@spectron.de www.spectron.de

NOTAT

............................................................................................................................................... ............................................................................................................................................... ............................................................................................................................................... ............................................................................................................................................... ............................................................................................................................................... ............................................................................................................................................... ............................................................................................................................................... ............................................................................................................................................... ............................................................................................................................................... ............................................................................................................................................... ............................................................................................................................................... ............................................................................................................................................... ............................................................................................................................................... ............................................................................................................................................... ............................................................................................................................................... ............................................................................................................................................... ............................................................................................................................................... ............................................................................................................................................... ............................................................................................................................................... ............................................................................................................................................... ............................................................................................................................................... ............................................................................................................................................... ...............................................................................................................................................

Adr.: Hegdalveien 80, N-3261Larvik | Tlf.: 95 800 700 | e-mail: itec@itec.as | Web: www.itec.as

| 125

NOTAT

............................................................................................................................................... ............................................................................................................................................... ............................................................................................................................................... ............................................................................................................................................... ............................................................................................................................................... ............................................................................................................................................... ............................................................................................................................................... ............................................................................................................................................... ............................................................................................................................................... ............................................................................................................................................... ............................................................................................................................................... ............................................................................................................................................... ............................................................................................................................................... ............................................................................................................................................... ............................................................................................................................................... ............................................................................................................................................... ............................................................................................................................................... ............................................................................................................................................... ............................................................................................................................................... ............................................................................................................................................... ............................................................................................................................................... ............................................................................................................................................... ...............................................................................................................................................

126 | iTec AS

NOTAT

............................................................................................................................................... ............................................................................................................................................... ............................................................................................................................................... ............................................................................................................................................... ............................................................................................................................................... ............................................................................................................................................... ............................................................................................................................................... ............................................................................................................................................... ............................................................................................................................................... ............................................................................................................................................... ............................................................................................................................................... ............................................................................................................................................... ............................................................................................................................................... ............................................................................................................................................... ............................................................................................................................................... ............................................................................................................................................... ............................................................................................................................................... ............................................................................................................................................... ............................................................................................................................................... ............................................................................................................................................... ............................................................................................................................................... ............................................................................................................................................... ...............................................................................................................................................

Adr.: Hegdalveien 80, N-3261Larvik | Tlf.: 95 800 700 | e-mail: itec@itec.as | Web: www.itec.as

| 127

iTec AS Hegdalveien 80 3261 Larvik Tlf. (+47) 95 800 700 itec@itec.as

ET FÃ&#x2DC;RSTEVALG FOR INDUSTRIEN