Auto Ranging Digital Multimeter (DMM) An autoranging digital multimeter (DMM) that can measure voltage, current, resistance, capacitance, frequency, continuity, and diode tests. It has a 4.0-digit LCD with a 42-segment bar graph and offers features such as ‘hold’, ‘relative’, and ‘record’.
• LCD: 4000 count with 42-segment bar graph
• REC (Record Mode): Store minimum and maximum measurement period
• Range: Manually select the appropriate range
• AC/DC: Manually select AC or DC measurement
• Continuity Buzzer and Diode Test: Toggle diode test on Ohm function
• High-Resolution DCmV Range: Additional 001mV resolution for improved accuracy when performing low voltage measurements
• ACV (AC Volts): Measure the voltage of ABS wheel
• DCV (DC Volts): Measure the voltage of circuits
• Hz/Duty (Duty Cycle): Measure in percent the other devices
• REL (Relative Mode): Factor out lead resistance measurements or compare readings to a known standard. Can also be used for differential measurements
• HOLD: Lock the reading on the display for hard-toread reference
• Ω (Ohms, Resistance): Measure the resistance of spark plug wires, coils, sensors, and continuity of wiring
• AC/DC Current Functions (Amps): Measure the parasitic draw from the battery with ignition off
• Hz (Frequency): Measure the frequency of sensors and signals
• CAP (Capacitance): Measure the capacitance of condensers or capacitors found in today’s hybrid automobiles
• Built-in Tilt Stand: The tilt stand is built into the instrument housing
• Separate Fuse/Battery Compartment: Easily replace fuses and batteries in this separate compartment
High Accuracy & Readability – Large 2,000 count display with 0.5% DCV basic
Enhanced Functionality – Features Data Hold, Diode Check, and a wide measurement range
Safety & Durability – cULus 61010-1 certified, CAT II 1000V & CAT III 600V rated
DIGITAL THERMOMETER
PROMO PRICE: £20.05
Compact easy to use thermometer with large display and auto power off. Auto field calibrate +/-1˚C in less than 10 seconds using ice water. Includes protective boot
Easy-to-read LCD
Field calibrate to +/-1°C
Data hold
• Penetration tip
• Auto off
• Temperature range -40°C to 150°C
>> GARAGE EQUIPMENT
24” FULLY AUTOMATIC TYRE CHANGER
RB221PA
PROMO PRICE: £1,495.00
The RB221PA is an extremely capable and popular tyre changer. This fully automatic model is capable of handling low profile and run-flat tyres on rim sizes up to 24 inches, with ease. Ideal for passenger and light commercial wheels, it is also capable of changing motorcycle tyres with additional adaptors.
Supplied with:
• Operation manual
• 3-way assist arm
• Pre-filter and oil lubricator
• 18" tyre lever
24” SEMI-AUTOMATIC 2D WHEEL BALANCER
RB825
Alloy wheel protection kit:
• Plastic inserts for metal mounting head
• 4 clamping jaw covers
• Complete hardened plastic mounting head
• Plastic
PROMO PRICE: £780.00
Small on price but big on features, the RB825 24” semi-automatic2D wheel balancer is, in our view, the best budget wheel balancer money can buy. Auto 2D data entry and motorised spin mean accuracy is easy and your time at the balancer is minimised. This semi-automatic wheel balancer can balance most passenger car and light commercial rims currently available on the market.
This fully automatic tyre changer/wheel balancer package is a great option for garages and MOT stations that can’t justify a huge investment in tyre equipment, but need to be able to handle run-flat or difficult, low profile tyres. These best-selling models from ISN Garage Assist eliminate the risk-factor in buying an unknown brand for the sake of price.
Buy these two machines together for Just £3,150 and save £240! Special Package Price!
ECOMOUNT 22 PLUS PROMO PRICE:
£2,195.00
BOMEC022+-B
• Clamping range of 10” to 24”
• Includes robotic assist arm
• Supplied with comprehensive on-site training
• 2 Year Warranty
ECOSPIN PROMO PRICE:
£1,195.00
E1500
A compact, Italian designed wheel balancer with a price tag that makes balancing an affordable addition to any workshop. A 40mm balancing shaft, reassuringly quiet operation and host of useful balancing features set this apart from other budget wheel balancers.
• Manual data input
• Simple & easy to use
ECOMOUNT 22 PLUS & ECOSPIN 2D
BOMECO22 + E1505 PROMO PRICE: £3,350.00
Upgrade the Ecospin TO the Ecospin 2D (E1505) for an extra £200!
ECOSPIN 2D
E1505
PROMO PRICE: £1,395.00
The ecospin 2D wheel balancer provides the added benefit of automatic data entry of wheel diameter and offset, speeding up the balancing process and reducing the risk of data entry errors, for an even better balancing experience.
• Compact design
• 2 Year Warranty
M18 FUEL BRAKING VARIABLE SPEED
SMALL ANGLE GRINDER - NAKED
MWM18FSAGV115XPDB-0
PROMO PRICE: £153.35
• 5-step speed dial with performance equivalent to a 1200W corded grinder
• RAPIDSTOP™ brake stops disc in under 2 seconds
PERCUSSION DRILL
GEN 4 – NAKED
MWM18FPD3-0
PROMO PRICE: £166.65
• Delivers 158Nm max torque with a compact 175mm design
• AUTOSTOP™ control mode prevents over-rotation for enhanced safety during bind-ups
• Features 13mm metal chuck, LED light, fuel gauge, and reversible belt clip for convenience
• Built on the FUEL™ platform with POWERSTATE™ brushless motor, REDLINK PLUS™ electronics, and REDLITHIUM™ battery compatibility for top-tier power and durability
M12 FUEL SUB COMPACT IMPACT WRENCH 3/8IN KIT
MWM12FIW38-622X
PROMO PRICE: £233.35
• 3/8” anvil with friction ring allows quick and easy socket changes
• Compact 125mm length for improved access
• Bright LED for enhanced visibility in low light
• Includes smart auto shut-off mode, charger, 1x M12 6Ah battery, 1x M12 2Ah battery, & carry case
M12 FUEL EXTENDED 3/8IN REACH RATCHET
MWM12FIR38LR-0
PROMO PRICE: £192.05
• Up to 75 Nm of torque and 200 RPM, ideal for automotive and maintenance tasks
• Adds 81mm for accessing tight spaces, with durable FUEL™ technology and reinforced steel construction
• Supplied with a 1/4” drive adapter; compatible with Milwaukee M12™ batteries and chargers (sold separately)
M12 FUEL EXTENDED REACH 3/8 RATCHET – NAKED
MWM12FHIR38-0
PROMO PRICE: £138.65
• Delivers up to 47Nm torque and 450 RPM with a 19mm low-profile head for tight space access
• Variable speed metal trigger and LED light offer precision and visibility
• Built with FUEL™ technology, reinforced mechanism, and rubber overmold for durability and comfort
• Includes 1x M12 B2 battery, C12 C charger, tool bag; REDLINK PLUS™ and REDLITHIUM™ ensure power and protection
M18 FUEL GEN 3 1/2IN HIGH TORQUE IMPACT WRENCH FORGE KIT
MWM18FHIW2F12-601F
PROMO PRICE: £665.35
• Delivers up to 1491 Nm fastening and 2034 Nm nutbusting torque in a compact 193mm body, with four adjustable speed/torque settings (2000–750 RPM) for precision control
• Features Tri-LED lighting for high-definition visibility in low-light environments
• Includes 1x M18 6Ah FORGE battery, 1x M12-18 Fast Charger, and a heavy-duty carry case
