GW168MM
n 168PC all-in-one mechanics tool set.
n 90-tooth ratchets with 4° swing arc.
n 14 metric combination wrenches included (6-19mm).
n Includes 1/4” and 3/8” standard, deep and 12-point sockets.
n Torx, E-Torx and hex bit assortment.
n Heavy-duty carry case.
n Lifetime warranty included.
n PowerFlow™ load-testing exposes excessive voltage drop, corrosion and weak grounds under real-world conditions, on both the positive and negative sides of a circuit
n Accurately measure resistance from 0Ω to 25kΩ.
n Supply 12/24V DC power or ground at the probe tip to activate relays, motors, lights and solenoids and verify functionality on the spot.
n DC voltmeter with a 0–60V range accurately measures voltage.
n The versatile four-way PowerPad™ actuator button delivers convenient,one-handed control of full tool operation.
n Built-in electronic latching enables continuous power or ground output for extended hands-free testing.
n Activate and test components by supplying battery voltage or ground from the tool.
n Digital DC voltmeter with min/ max voltage capture helps you identify drops and intermittent issues, with clear polarity and voltage indication.
n DC voltmeter indicators provide active feedback.
n LED lights.
n Bad ground indicator.
n Short circuit indicator.
n Relay and component tester
n Audible monitoring of electrical signals.
n Trace and locate earth shorts and open circuits without the need to remove panels, trim or upholstery from the interior of the vehicle.
n Find broken wires and switch faults quickly with the receiver’s audible and LED indicator.
n CAT-IV 600V hybrid safe rating.
n Digital Volt and Ohmmeter for circuit testing.
n Measures Frequency for Sensor Testing.
n Included K-Type Temp Probe allows for temperature readings.
Topdon Battery Tester BT600 TDBT600
n 3.5” colour screen.
n Built-in thermal printer allows you to view all of your battery data easily and print reports in real-time.
n Protection against improper connections.
n Working Voltage DC 9V~30V.
Topdon Jump Starter V4500 Plus TDV4500PLUS
n Boasting a peak current of up to 4500A, it swiftly revives a diverse range of vehicles.
n Capacity for up to 45 jumpstarts on a single charge.
n Capability to test your battery and monitor its status through an app.
n Equipped with 15 ultra-bright LEDs and six red warning lights it delivers up to 500 lumens of light.
Topdon CT100 Automotive Circuit Tester
TDCT100
n Voltage Measurement Range:
DC 3.3–65V.
n High-accuracy voltage measurement:
• 3.3–60V: ±0.1V.
• 60–65V: ±0.2V.
n Measurement Resolution: 0.1V.
n Load Test Operating Range: DC 5–30V (Max. 1.2A).
n Working Temperature: -10°C to 50°C.
n Cable Length: 3.8m.
n Turns a phone into a scan tool.
n Connect the TopScan to the OBD2 port and begin diagnosing through the tool’s app.
Topdon Jump Starter V3000 TTDV3000
n Designed to reliably start 12V vehicles with up to 9.0L petrol and 7.0L diesel engines.
n Features 10 layers of mistake-resistant protection to prevent sparks and incorrect connections.
n Equipped with a powerful tri-mode LED light-Flashlight, Strobe, and SOS-the V3000 adapts instantly to your needs.
Battery Charger T90A Tornado 90000 12v & 24v TDT90A
n 6 charging modes: Supply, Repair, Normal, AGM, Cold, Boost.
n Capable of reading and clearing fault codes across 70+ different vehicle makes.
n Software re subscription after 12 months can be done via the app directly.
n 9-Step Smart Battery Charging adopts a smart 9-step charging system.
n Suitable for 12V and 24V battery charges. Including AGM, WET, GEL, MF, CAL, and EFB batteries.
n LCD screen.
n Built-in temperature sensor.
n Current rating 90 Amps.
n Output Voltage 24 Volts.
Topdon TPMS TP48 TDTP48
relearning procedures, and Sync
n Thermal imaging camera specifically for iOS Type-C devices.
n Ultra-high resolution of 256x192 delivers clear and detailed images.
n Temperature detection range of ±3.6°F(2°C), with an accuracy of 0.1°C; asensitivity of 40mk allows for precise temperature changes to be sensed.
AUGUST OFFERS – FIRST EDITION
n Sizes 1.5–10mm
n Magnetic tips.
n Includes sizes 3mm to 10mm.
n Ball end design allows angled access to fasteners in awkward spaces.
n Sizes: 3–10mm
n Length: 110m.
n Includes 9 Torx sockets (T10–T50) with a 3/8” drive for a wide range of applications.
n Made from high-quality materials for long-lasting performance.
n Premium Build: Made from highquality chrome molybdenum alloy steel with a black phosphate finish
n Heavy-Duty Design: Extra-long, impact grade construction for tough applications.
n Organised Storage: Supplied in EVA foam for protection and easy access.
n Comprehensive Set: Includes sizes T30, T40, T45, T50, T55, T60, T70, and T80.
n Designed specifically for external Torx fasteners
n A secure and precise fit to minimise the risk of fastener damage.
n Made from high-quality materials, the sockets are durable, strong, and built to withstand high-torque applications.
n Includes 1/4”, 3/8” and 1/2” sockets.
n Sizes E4-E24.
n Includes 8 spline bit sockets (M4–M14) with 3/8” drive.
n Made from high-quality materials.
n Press-type design ensures firm attachment to ratchets or socket wrenches.
n Handles daily use with consistent reliability. 8pc 3/8”
n Sizes T10, T15, T20, T25, T27, T30, T40, T45, T50, T55.
n Length 110mm.
6pc Mini Plier Set SUNSXMPS6
n Includes needle, flat, long, bent nose, diagonal cutting, and end nippers.
n Crafted from durable high carbon steel.
8pc Torx Screwdriver Set Magnetic T8-T40 SUNSXTSD8
n Includes 8 Torx screwdrivers in a variety of sizes from T8–T40 ensuring you have the perfect tool for any task.
n Each driver is 4” in length, offering precise fit and control for specialty fasteners.
n Includes 4 Phillips: PH2, PH1, PH2, PH3 and 4 Slotted: SL1/4, SL3/16, SL1/4, SL5/16.
n Select sizes are equipped with hex bolsters, allowing for increased torque when used with a wrench.
3/8” Drive Bit Socket Set, Metric & SAE
SUN9737
n 37 bits covering Slotted, Phillips, Pozidriv, Hex, Torx & Tamperproof Torx, with engraved size markings.
n S2 steel construction with manganese phosphate finish for long-lasting durability.
n Heat-treated, full-polish chrome socket bases for added strength.
n Precision-made for accurate and secure fastener engagement.
2pc Long Reach Compound Joint Pliers Set
SUNSXCJPS
n Jaws open to 2” wide while handles require minimal movement.
n Straight and 45° bent nose pliers offer superior access in confined areas.
n Precision serrated jaws deliver secure gripping.
n Constructed from high-quality alloy steel.
Set
9-30mm
n Sizes 7–19mm.
n Made from heat treated Cr-V for strength and durability.
n Ergonomic, comfortable grip.
n Radius V-Groove open end reduces slip and prevents fastener rounding.
n Radius-corner closed end improves grip and prevents fastener rounding.
n Deep: 9–24mm, 26mm, 27mm, 30mm.
n Standard: 10–24mm, 26mm, 27mm, 30mm.
n Includes 1/2” impact universal joint.
n Radius-corner design increases fastener engagement and reduces wear.
n Dual size markings for easy identification.
n Corrosion-resistant CR-MO alloy steel.
n Thin wall socket design for access in spaces standard sockets will not fit.
n 6 point design for use on impact drivers and manual drive tools.
n Single hex (6pt) fastener end design.
n Chrome vanadium alloy steel.
n Sizes 10, 12, 13, 14, 15, 17, 19.
n Stubby beam length for improved access to limited access fasteners.
n Ratcheting box end features off-corner loading design to reduce fastener rounding.
2pc DoubleX Pliers Set ST70003U
n Jaws open wider than the handles for added reach in tight locations.
n Flush rivets are stronger and have a thinner profile.
n Compound joint opens wider with less effort and minimal handle movement.
n Overall length 40cm.
n Specially shaped dollies for precise work.
n Pointed tip on hammer for deep forming.
n Extra wide faces are cross grooved and used for shrinkage on large surfaces.
n Chrome vanadium alloy steel.
7pc Stubby Combi Spanner Set 10-19
n Stubby beam length for improved access to limted access fasteners.
n Full-polish chrome finish wipes clean easily.
n Box-end features offcorner loading design to reduce fastener rounding.
1/2” Dr Impact AdaptorS
n Precise fit for a solid grip and chamfered tips for faster insertion.
n Easy to read size markings.
n Keys fold up into a grip case for efficient organisation and comfortable use.
n Pin hole can be used with detent pin for secure socket retention to the adapter.
n For use with impact drivers.
n Chrome-molybdenium alloy provides better durability.
n Keys fold up into a grip case for efficient organisation and comfortable use. 7pc Metric Stubby Combi Ratcheting Spanner Set 10-19 ST09034
n Black oxide finish to resist corrosion.
n Dual material comfort grip.
n Precise fit for a solid grip and chamfered tips for faster insertion.
n Easy to read size markings.
n
n
n
n ZEUS 5-13G True Colour welding helmet.
n Features: Adjustable sensitivity/delay, grind mode, optional magnifier.
n 4 possible settings:
- Tint 5-9 / 9-13.
- Sensitivity and delay.
- Grind mode.
n UV/IR protection level: 15.
n Classification: 1/1/1/2.
n Light tint: 4.
n Dark tint: 5-9 / 9.
n Reaction time: 0.08 ms.
Knipex Needle Nose Combi
K0821145
Reach Needle Nose
n Easy cutting thanks to the high leverage joint.
n Handy use when working in confined areas thanks to slim head design and pointed jaws (anti-twist).
n Gripping surfaces with special convex contour on one side for secure gripping of flat parts.
n Maximum torque of 65
a working torque range
n Extended drive shaft, providing access
to hard-to-reach fasteners
n Operating at a free speed of 160 RPM, this ratchet provides quick and efficient
n Constructed with high-grade materials and additional support bearings.
n Compact and lightweight,
n Reliable gripping, holding and guiding of small copper pipes, screws and cables as well as other round parts thanks to milled grooves with smooth surfaces.
n Jaw thickness 9mm.
n Tips width 3mm.
n Jaw length 76.5mm.
Automatic hands-free brightness and focus adjustment. Powerful 1600lm beam with up to 210m range. Red, green and blue light modes for enhanced visibility in different environments. IP68 waterproof and durable aluminium construction.
Rechargeable battery with easy magnetic charging system.
n Sizes 8,10,12,13,14,17,19, 22mm.
n 45-tooth flip reverse comfort grip ratchet wrench with push-button quick release.
n Socket Bits (50mm); 4, 5, 6, 8mm.
n Locking extension bars
150, 250mm, 200mm.
n Hardened and tempered chrome Vanadium steel sockets and accessories.
Transmission JackTelescopic 500kg TT500STJ
n High-speed lift to gearbox.
n Foot pedal operation keeps hands-free.
n Equipped with sturdy casters, the transmission jack offers smooth and effortless manoeuvrability, allowing for easy positioning and alignment of the transmission during installation and removal procedures.
n Features a secure locking mechanism to prevent accidental lowering.
