International Research Journal of Engineering and Technology (IRJET)
e-ISSN: 2395-0056
Volume: 07 Issue: 07 | July 2020
p-ISSN: 2395-0072
www.irjet.net
Design and Analysis of Multi Purpose Cutting Machine for Agriculture Jayesh S. Kamble1, Dr. Sushil Kumar Singh 2 CAD/CAM GHRCE Nagpur Professor Department of Mechanical Engineering, GHRCE, Nagpur ------------------------------------------------------------------***-----------------------------------------------------------------this cut parts as nourishment for pet animals Abstract- The recently structured yield cutting like wild oxen, bull, cows and goat etc. unit works without utilizing any sort of fuel or Groundnut is one of the significant agriculture electrical vitality and can be worked with more items in India. Rancher use to isolate muscle power. This gear utilizes joined sharp groundnuts from its plants by physically. This edges for effective yield cutting. The present requires more labour as 20-30 works for each structured and manufactured harvest shaper section of land, and furthermore this is tedious can be utilized to cut the straws of various operation. Rice is one of the most loved nourishment grain crops like Paddy, wheat and nourishments of India. Paddy is its underlying furthermore grass. It is basic in development phase. Ranchers expelling this paddy from and the working is simple. The yield shaper is paddy plant called as paddy stripping, and this really a use of unadulterated mechanical is finished by a few techniques. More often than information to improve the nature of work not ranchers use to expel paddy from its plant with least work and time, extent of research in by physically. farming types of gear despite everything stays a prolific field for creative thoughts. METHODOLOGY - Methodologies used in this machine are explained below. Keywords- Paddy Thresher, groundnut stripper, Straw cutting, Sugarcane Seed Cutting. 1. Sugarcane Seed Cutting- The sugarcane seed cutting machine is essentially INTRODUCTION- in India agriculture has founded on CAM Activity. One shaft put been confronting genuine difficulties like vertically, the sharp cutting edge is put shortage of agrarian work, in top working at the base of this pole Rotator seasons as well as in ordinary time. Then again movement of the cam is changed over cultivable land is diminishing due to into linear movement of shaft. A pin is urbanization; agricultural automation is one put at the base so misuse of sugarcane approach to beat this problem. The and sugarcane with seeds will be fundamental farming items in India are isolated. groundnut, paddy, sugarcane and wheat. A 2. Groundnut StripperGroundnut portion of these agriculture items are clarified stripper comprises of elastic sharp underneath edges mounted on the little shaft which For ranch of sugarcane, the sugarcane seed must be planted in wet soil. This will turn by engine. The intensity of sugarcane seed is only piece of sugarcane. In engine is transmitted to the edges customary manner ranchers use to cut entire through shaft. The groundnut plant will sugarcane in 5-6 sections, so that each part be feed to cutting edges with the having 2-3 seeds. At that point those cut parts assistance of slider by physically. At that are planted in soil. Straw is remaining piece of point turning cutting edges will isolate Jowar and Maize plant, after evacuation of corn the groundnut from the plant. part. Rancher use to cut this straw and utilize 2Assistant
Š 2020, IRJET
|
1M.Tech
Impact Factor value: 7.529
|
ISO 9001:2008 Certified Journal
|
Page 2295