International Research Journal of Engineering and Technology (IRJET)
e-ISSN: 2395 -0056
Volume: 03 Issue: 02 | Feb-2016
p-ISSN: 2395-0072
www.irjet.net
SMART LPG SYSTEM Mr.Rahul Gachhe 1, Mr.Dhiraj Gaikwad 2, Ms. Sonali Hirave3, Mr. S.S.Ayane 4 BE Student, Dept. of ENTC, Pimpri Chinchwad College of Engineering, Pune, Maharashtra, India Student, Dept. of ENTC, Pimpri Chinchwad College of Engineering, Pune, Maharashtra, India 3 BE Student, Dept. of ENTC, Pimpri Chinchwad College of Engineering, Pune, Maharashtra, India 4 Assistant professor, Dept. of ENTC, Pimpri Chinchwad College of Engineering, Pune, Maharashtra, India 1
2 BE
--------------------------------------------------------------------***--------------------------------------------------------------------energy when properly ignited. In the use of combustible equipment in which a combustible gas provide a novel means for safely detecting any malfunction of a pressurized gas system in order to protect accumulation of such as natural , liquid propane gas is burned in combustible gases so that damage and explosion due to such heating boilers, domestic water heaters, ovens, the an accumulation of gases is prevented. Another objective of the equipment and appliance is generally of an present invention is to provide a novel safety means for automatic recycling type. That is to say, the detecting the leakage of LPG gas into the area of an appliance equipment is generally in operation for short when the appliance is suddenly shut down due to wind and any periods of time after which is shut down for a short other reason. Yet another object of the present invention is to time period. The equipment has intermediate provide a novel gas detection and monitoring system for boats operation and the appliance is generally start and or the like which are normally dependent upon a stored supply stop at the signal of an automatic controller, such of pressurized gas. Typical installation areas are gas yards as a thermostat, which may be actuated by (Bullets), gas banks with multi cylinders in manifold, utility areas like kitchens. This project is used to monitor the weight temperature, pressure, etc.
Abstract - The primary objects of the this project is to
of LPG cylinder and send sms through GSM. In our home we observe whenever LPG gas cylinder is empty, we give request for new gas cylinder at the office of service provider. Main reason behind this is delay in informing to the service or we inform the service provider at the last moment when the cylinder is empty. In home and hotels the main use of LPG gas is for cooking. But in industry sometimes LPG gas and some other combustible gas is used for some other purposes. In these places if the LPG gas inside gas cylinder is finished at that time request for new gas cylinder is sent to the storage department but, if there is shortage in stock then delay in providing new gas cylinder. This may cause dealy in process and intern dealy in production. Main objective of this project is to get alert when there is leakage or when the cylinder is supported to end so that request to service provider can be send at early stage. Another objective is to provide auto switch off to gas supply under accidental conditions using stepper motor etc. Key Words: microcontroller, GSM module, stepper motor, Gas sensor, load cell, LCD, Buzzer
1. INTRODUCTION This system helps you to protect your safety standards in day to day life, compulsory requirements on environmental commitments, most important basic function being prevent accidents and protect day to day life. In the past, it has conventional practice to employ combustion equipment such as a furnace or heater or stove or LPG kit in cars, which utilizes a gas to produce heat © 2016, IRJET
|
Impact Factor value: 4.45
|
Whenever LPG gas cylinder weight is less than or equal to 20% remaining, system sends a low priority, or low warning message to the owner of the house, owner of hotel, industry. So use of first low priority SMS is that user gets intimation about the weight of the gas cylinder. So he/she can immediately place the order / book a new LPG cylinder or gas refilling by online. In some cases user can ignore the first SMS because it has low priority but still there is a 20% gas remaining inside the gas cylinder. 20% means still there are some days for which user can use the gas and whenever the user receives the second SMS then he/she can immediately give booking for the gas .Now days LPG Gas cylinder booking in some cities is done by sending SMS or by online. We have to send SMS from a registered number to the gas booking agency. Then our request is taken means we don’t have to dial a call and we don’t have to visit the agency personally. This project is helps in implementing the method by sending SMS whenever the gas is empty. We can send SMS to the gas provider agency whenever gas weight is 5%, or empty.
ISO 9001:2008 Certified Journal
|
Page 1025