IRHACE Journal June 2024

JUNE 2024

The Industry Journal for the New Zealand Refrigeration, Heating, Ventilation & Air Conditioning Industries

INSIDE THIS ISSUE

WHAT ROLE DOES HVAC&R PLAY IN PRESERVATION? GLOBAL SKILLS CHALLENGE WRAPS UP ACROSS THE DITCH KEEPING THE DAIRY INDUSTRY MOVING SUBMISSION TO CLIMATE CHANGE COMMISSION’S DRAFT ADVICE ON AOTEAROA NEW ZEALAND’S FOURTH EMMISSIONS BUDGET irhace.org.nz 1

MEDIA KIT 2024

DEDICATED TO THE HVAC&R SECTOR CONNECT WITH US HVAC&R INDUSTRY NEWS ALL IN ONE PLACE

irhace.org.nz

JUNE 2024

PUBLISHER IRHACE/CCCANZ/RLNZ IRHACE: www.irhace.org.nz CCCANZ: www.cccanz.org.nz RLNZ: www.rlnz.org.nz

16

EDITOR Cassie Birrer editor@irhace.org.nz MEMBERSHIP admin@irhace.org.nz admin@cccanz.org.nz

8

REFRIGERANT LICENSING & COURSES admin@rlnz.org.nz ADVERTISING admin@irhace.org.nz DESIGN Bellacreative Ltd HVAC&R CENTRE PO Box 217184 Botany Junction 2164 Auckland, New Zealand e: admin@irhace.org.nz e: admin@cccanz.org.nz e: admin@rlnz.org.nz No part of this journal may be printed in other publications without prior written permission of the Managing Editor.

Disclaimer: Statements expressed in this publication do not necessarily reflect the policies or views of the associations, and members of IRHACE or CCCANZ. The IRHACE Journal publishes both local and international articles. Standards and or practices may differ from current New Zealand standards and or practices used. No responsibility is accepted by the associations and editor for the accuracy of information or for errors or omissions. The IRHACE Journal is distributed to all the IRHACE and CCCANZ financial members.

ISSN 01148257

17

FEATURES

8

What role does HVAC&R play in preservation?

16 17

Take a look at how documentary heritage is preserved in the National Library

Global Skills Challenge wraps up across the ditch New Zealand brings home a competition medal

Keeping the dairy industry moving Current challenges and the changes needed

22

Climate Change Commission’s draft advice on the fourth emmissions budget A summary of HVAC&R Centre’s submission

ASSOCIATIONS

30

32

34 1

Our New Zealand apprentice achieved silver in the Global Skills Challenge in Melbourne – a first for our industry In this issue of IRHACE, we learn how the National Library uses HVAC&R in preservation, share fantastic news of our New Zealand apprentice achieving silver in the Global Skills Challenge in Melbourne, and give insight into our visit to ARBS 2024 in Sydney. Plus, the HVAC&R Hub is finally here!

The HVAC&R Hub speaker lineup on June 25–26 has been announced and we have speakers on data centre cooling; refrigerant realities: engineering smart sustainable HVAC systems for tomorrow; a comprehensive overview of heating, ventilation and air conditioning systems; and enhancing user comfort and energy efficiency in centralised air conditioning systems.

In June, we celebrate World Refrigeration Day with this year’s theme ‘Temperature Matters’. We also take a moment to acknowledge and thank the HVAC technicians for their hard work and dedication to keeping our environment comfortable and healthy.

Coming up in July are the Wallie Askew Regional Challenges in Auckland, Palmerston North and Christchurch. This year there is a record number of entries and you are invited to come along and support our HVAC&R apprentices.

We are pleased to welcome Andrew Bradley from Huddleston and Malcolm Miller from Absolute Air Conditioning to the RLNZ Board, along with Rodger Wyatt from Beattie Air onto the IRHACE Council.

We look forward to their contributions and leadership.

PHIL MOHAN

PRESIDENT IRHARCE

GARY REILLY CHAIR CCCANZ

“World Refrigeration Day aims to raise public awareness about how refrigeration technologies improve daily life and contribute significantly to the wellbeing of society.

Join us at the HVAC&R Hub 2024, which highlights the critical role of refrigeration, air conditioning and heat pump technologies.”

I look forward to seeing you at the HVAC&R Hub 2024 on Tuesday 25th and Wednesday 26th at the Auckland Showgrounds.

GINA MCMASTER

CEO. IRHACE, CCCANZ, RLNZ

Gina

June 25–26, 2024 – See you there! irhace.org.nz

JUNE 2024

Fire Dampers you can rely on.

LR DAMPERS Fully compliant with the latest testing standards AS 1530.4 - 2014 and AS 1530.7 - 2007, LR Fire, Fire-Smoke, Smoke (Exhaust) and Balancing Dampers are easy to install, with a swift turnaround time to meet market demand.

Available in seven diameters: 100 | 125 | 150 | 200 | 250 | 300 | 350 mm

CONTACT YOUR LOCAL HOLYOAKE BRANCH TO LEARN MORE ABOUT THE LR DAMPER SERIES AUCKLAND

WELLINGTON

CHRISTCHURCH

auckland@holyoake.com

wellington@holyoake.com

christchurch@holyoake.com

+ 64 9 274-4144

+ 64 4 232-2722

+ 64 3 366-6545

3

AROUND THE INDUSTRY 1

2

5

3

6

1 McAlpine Hussman technical visit

4 Beijer Ref promotes kindness

Cooke Industries had the pleasure of hosting McAlpine Hussmann for a tour of their factory to witness their manufacturing process first-hand in Auckland. Attended

by Lucy Cai, Jihad Mansoor Manalody and Jeffrey Chang from McAlpine Hussmann.

Beijer Ref staff also participated in Pink Shirt Day in May, standing up to eliminate bullying by celebrating diversity and promoting kindness and inclusion. Kōrero Mai, Kōrero Atu, Mauri Tū, Mauri Ora – Speak Up, Stand Together, Stop Bullying!

2 Speak up, stand together, stop bullying

5 Patton proud in pink

Realcold went all out for Pink Shirt Day showing their true colours and celebrating all things pink.

Patton staff proudly joined in Pink Shirt Day 2024! We’re united in the fight against bullying, celebrating diversity, promoting kindness and inclusion.

3 1M standing together 1M (1st Mechanical and 1st Maintenance) celebrated Pink Shirt Day, standing together to eliminate bullying by celebrating diversity and promoting kindness and inclusion. Everyone deserves to feel safe, included, respected and valued.

irhace.org.nz

JUNE 2024

6 World Refrigeration Day June 26, 2024 This year’s theme, ‘Temperature Matters’ is timely, coinciding with the 200th anniversary of the birth of Lord Kelvin – a pioneering figure in thermodynamics after whom the absolute temperature scale is named.

Temperature connects us all and all we do in this industry.

8

4

7

9

7 All Seasons Air Conditioning Two new vans are on the road and two new staff onboard for the All Seasons Air Conditioning Hamilton team. Keep an eye out for their lads putting in the hard yards around the Waikato and Bay of Plenty.

8 GB Teat Jonny Teat from GB Teat in Rotorua is one of the latest winners of a Brass Monkey Chilly Bin/Mini Fridge, as part of Realcold’s Sauermann giveaway promotion.

9 Chillex Group at ARBS The Chillex team recently visited the ARBS Exhibitions Expo in Sydney. Highlights of the event for them included catching up with our industry partners, exploring cutting-edge advancements in technology and seeing first-hand the push for greener alternatives.

5

600

Wall Mounted System hitachiaircon.co.nz

6 YEAR WARRANTY

INDOOR & OUTDOOR UNIT FROSTWASH

HUMAN SENSOR

BUILT IN WIFI CONTROL

SMART ECO

SLEEPSENSE TECHNOLOGY

4 STAGE AIR PURIFICATION

MOULD GUARD HEAT ATTACK

AQtive-Ion Technology

Indoor & Outdoor Unit FrostWashTM

Automated Sensor Control

Wi-Fi Control

irhace.org.nz

JUNE 2024

WIDE & LONG AIRFLOW

A shoutout to HVAC&R technicians

Let’s take a moment to acknowledge and thank the HVAC&R technicians for their hard work and dedication to keeping our environments comfortable and healthy They play a crucial role in ensuring our homes and workplaces remain comfortable throughout the year.

Their work involves installing, maintaining and repairing heating, cooling and ventilation systems essential for indoor climate control and air quality.

There are no specific requirements to become a HVAC&R technician as you gain skills on the job. However, many employers prefer to hire refrigeration/air-conditioning technicians who have or are working towards a qualification.

To become a fully qualified refrigeration/air-conditioning technician you need to complete an apprenticeship and gain a New Zealand Certificate in Refrigeration and Air Conditioning – Trade (level 4).

HVAC fun facts •

• •

The first air conditioner was built on July 17, 1902,

by Willis Haviland Carrier to control humidity in a printing plant and allow ink to dry in hot conditions.

He was named one of TIME magazine’s ‘100 Most Influential People of the 20th Century’ in 1998.

The first automotive air-conditioned car was the 1939 Packard. The AC unit took up most of the vehicle’s trunk space.

The world’s largest HVAC system is in the Holy Mosque in Makkah (Mecca), Saudi Arabia. To cool a space that sees up to 1 million visitors a month in a climate where temperatures frequently top 100 degrees, the system has 135,000 tonnes of refrigeration capacity and uses R134A refrigerant.

Servicing and maintenance

We recommend using a CCCANZ member company to service and maintain your air-conditioning systems.

7

What role does HVAC&R play in preservation?

Senior Conservator at the Alexander Turnbull Library, Vesna Živković, shares how documentary heritage is kept from degradation irhace.org.nz

JUNE 2024

The IRHACE collection at the National Library includes records relating to the organisations from which current institute is formed, such as IRACE minutes (1933-83), IHVE minutes (1977-86), a members list from the 1950s-80s, collection copies of the periodical Thermonews, and more.

Materials were donated by IRHACE in November 2011.

“In the National Library, we currently have more than 7,000 square meters of collection stores with different collections, varying from newspapers, photographic negatives, books and manuscripts, to audiovisual materials, and each of these stores has its own HVAC plant,” says Vesna Živković, Senior Conservator at the Alexander Turnbull Library, National Library of New Zealand.

“When it comes to library and archives materials, they are mostly paper-based objects inherently sensitive to incorrect levels of temperature and relative humidity.

The rule is the lower the temperature, the longer the life expectancy of those items. For example, newspapers are printed on acidic paper and are not intended to last, so if you keep them in room conditions, they will yellow, become brittle and disintegrate.”

Research shows that dropping the temperature by five degrees can double the life of chemically unstable material such as this.

“Thus, cooler temperatures are preferred for collections with long-term value. The guidelines for extended-term storage conditions specify different temperature ranges for the storage of mixed media collections based on their sensitivity and chemical stability, including cold conditions between 0ºC and 8ºC, and cool conditions, set between 8ºC–16ºC. Both Archives New Zealand and the National Library have these conditions,” says Vesna.

“The National Library was purpose-built in 1985, which is rare for cultural heritage buildings, and was the first government building in New Zealand to have air conditioning installed.”

Lowering relative humidity also contributes significantly to extending the life expectancy of documentary heritage, says Vesna.

Conditions for the preservation of material in the library include: Buildings such as the National Library of New Zealand Te Puna Mātauranga o Aotearoa are time capsules, preserving documentary heritage such as manuscripts, books, paper documents, newspapers, maps, prints, drawings, audio and videos, and other items from previous decades and centuries. IRHACE even has historical information stored with the National Library including minute books, proceedings of IRHACE conferences and symposiums, as well as Journals dating back to 1933.

To keep these items from degradation, control of environmental factors is important. Air conditioning has been used to achieve this since the Second World War when The National Gallery in Britain stored paintings at 50 per cent relative humidity and 20ºC in a subway for safekeeping.

• A cold room at 2ºC with a freezer at -25ºC. “The freezer is intended for long-term preservation but mostly for treatment of pests and also for freezing the wet library material in case of flooding. This is an option when there is mass damage to material and you cannot treat it immediately,” says Vesna.

• A cold store at 2ºC at 30 per cent relative humidity, intended for photographic negatives including nitrate and acetate negatives. This climate is equally important for the preservation of unstable (colour) negatives and transparencies.

• Cool stores ranging from 13ºC, 40 per cent relative humidity to 18ºC, 45 per cent relative humidity.

9

Changes to the National Library’s storeroom conditions Previously, the National Library aimed to achieve a flatline of both relative humidity and temperature – which it succeeded in – as this was considered imperative and optimum conditions for the preservation of objects in cultural heritage institutions.

“However, current research on material deterioration and discussions on environmental sustainability have prompted the question of whether these tight environmental controls and maintaining specific set points and narrow ranges are necessary.

Furthermore, in a library or archives facility where you have mass of hygroscopic materials, the impact of fluctuating relative humidity would be slow and minimal,” says Vesna.

“What we are looking at now is broadening the environmental parameters. Rather than having, for example, 13ºC plus or minus -2ºC and 40 per cent plus or minus -10 per cent relative humidity, we are looking into allowing seasonal variations and we are in the process of reviewing our requirements for conditions in collections stores based on our current body of knowledge.”

Vesna cites ASHRAE Chapter 24, intended for museums,

irhace.org.nz

JUNE 2024

galleries, libraries and archives, and its advice on options for allowing seasonal and gradual variations depending on climate and conditions in the building, as well as sensitivity of materials.

Mechanical system shutdown tests have also been completed, focusing on two stores with an intention to explore shutdowns as an energy-saving option to be implemented in the library without compromising the preservation of collections. One is highly insulated and tests showed it’s possible to shut down the HVAC system for up to 10 hours overnight without impact on the system or conditions in the store. Shutting the system down over the day has also been tested to see the benefits.

“Another test we conducted was in a storeroom with windows. This test confirmed the high level of air leakage and we are now looking at how we can manage that to enable both an increase in the store’s resilience and proceeding with mechanical system shutdowns,” says Vesna.

“While the National Library building has very well-maintained climate conditions for the collections, there are options to manage the HVAC systems more sustainably in terms of energy efficiency, decarbonisation and cost reduction.”

In 2021, the National Library established the Alexander Turnbull Library (ATL) Environmental Management Team (EMT) with the aim to make recommendations for energy savings and sustainable practices, while upholding the long-term preservation of collection materials. Utility bill analysis indicated that the energy used to condition ATL collection storage areas represented around 80 per cent of the total energy consumption for the National Library building.

The ATL EMT conducted a series of controlled mechanical system shutdowns to confirm the viability of shutdowns as an energy-saving strategy and to inform on the performance of the selected ATL collection stores in terms of conditions for preservation of collections and system operations. The results of the tests and subsequent discussions within the team confirmed that no significant changes in conditions that would present risks to collections, health and safety, or impact on system capability were observed during any of the plant shutdowns. It was also noted that there are further options for energy savings within the HVAC&R systems at the level of ventilation, fresh air intake and dehumidification as they are considered the biggest consumers of energy in the National Library building.

At the beginning of 2024, the National Library initiated an implementation of a series of sustainability initiatives through the Property Capital Forward Works Project (PCFWP). This includes planned mechanical systems shutdowns, building tuning, replacement of supply air fans and enabling the implementation of DCV (demand controlled ventilation).

Photographs courtesy of the National Library of New Zealand. Photographer Mark Beatty.

11

CO-LOCATED WITH

25–26 June 2024, Auckland Showgrounds New Zealand’s largest trade-only event for people who design, construct and manage the country’s buildings and facilities.

250+ EXHIBITORS

5000+ VISITORS

 Two Full Days of Seminars, Keynote Speakers and Live Demonstrations  Hundreds of New and Innovative Product Solutions  Earn LBP and CPD Points/Hours  Network Face to Face with Industry Experts  Trade Deals, Prizes and Much More!

Interested in exhibiting?

With an already impressive line-up, space is filling up fast.

Contact us today. liam@xpo.co.nz | +64 9 976 8310 | buildnz.com

Register to attend for free buildnz.com PROUDLY SUPPORTED BY

irhace.org.nz

JUNE 2024

BuildNZ 2024: Navigating Challenges and Shaping the Future.

The construction industry is facing a perfect storm: high interest rates, continued inflationary pressures and a cost-of-living crisis. But amidst these everyday struggles, there’s also a critical shortage of skilled workers and a wave of imminent government changes impacting the sector.

Navigating this storm is no easy feat, but BuildNZ, the nation’s largest industry-specific event, offers you the greatest chance to discover how to overcome these challenges and seize new opportunities. This must-attend pan-industry event equips attendees with the tools and knowledge they need to thrive in uncertain times. The industry is stronger together, and BuildNZ will unite everyone involved in designing, constructing, and managing New Zealand’s built environment.

This June 25-26, BuildNZ joins forces with Facilities Integrate and The National Safety Show at the Auckland Showgrounds. Bringing together the biggest names in construction in New Zealand for 2 days only, these events serve as a hub for major deals and partnerships, further solidifying the importance of exhibitions in facilitating strong business relations.

Packed with expert-led content, knowledge leaders and the latest products from over 250 local and international suppliers this must attend event uncovers innovation at every stage of the value chain. These events are the largest and most influential building and construction events in New Zealand.

In our increasingly digital world, the importance of face-to-face interaction remains paramount.

BuildNZ, as it has done so for over 30 years, provides the ideal space to get hands-on with product advancements and forge invaluable industry connections. This year’s edition promises to be the most significant yet presenting a platform for thought leaders, innovators, decision makers and construction enthusiasts to discuss the future of the sector.

An exceptional CPD and LBP accredited speaker series has been planned, including an architectural keynote panel session soon to be announced, adding to an already impressive program. Industry leaders from New Zealand’s top construction firms will join on the BCI Central stage, offering insights into market challenges and opportunities, anticipated development changes, the role of emerging technologies and key business priorities for the coming year.

As the industry grapples with ongoing change, the German New Zealand Chamber of Commerce will moderate a timely panel discussion exploring the implications and opportunities of the new EU-NZ Free Trade Agreement for New Zealand’s construction sector. Expect insights from EU representatives, legal experts and government officials.

As the sole large-scale event of its kind in 2024 catering to architects, specifiers and designers, BuildNZ enjoys the backing of leading industry associations and event partners. Don’t miss this pivotal event! Register to attend for free and learn more at www.buildnz.com.

PRESENTED BY

13

Seminar Series

BuildNZ and Facilities Integrate DAY 1 TUESDAY 25 JUNE

DAY 2 WEDNESDAY 26 JUNE

10.30am - 12pm (Keynote) Panel Discussion: The Future of Housing (15 NZRAB CPD Points)

10.30am - 11.30am Elevating Performance: Rethinking Procurement and Facilities Management for Maximum Value

• Greer O’Donnell Managing Director, The Urban Advisory • Chris Moller Director, Architecture and Urbanism Studio CMA+U • Rachel Venables Principal, Architect Maynard Marks • Jade Kake Director, Matakohe Architecture + Urbanism • Moderator: Tommy Honey Executive Director, New Zealand Construction Industry Council (NZCIC).

• Jack Crutzen Director, PRISMA Facilities Management • Kara Pugh Independent consultant/contractor in procurement and associated change

12.15pm - 1.15pm (Keynote) The BCI Construction League: Industry Insights from New Zealand’s Top Builders (10 NZRAB CPD Points) • Quin Henderson CEO, Southbase Group • Andrew Moore Commercial Manager, CMP Construction • Chris Penk Minister for Building & Construction, New Zealand Government • Greg Durkin Director, Building and Construction Industry Training Organisation • Ben Hurrell New Zealand Country Manager, BCI Central • Maddy Davies Group Marketing Manager, BCI Central • Moderator: Ash Porter BCI Central 1.15pm - 2.15pm (Keynote) Panel Discussion: Exploring the implications and opportunities of the EU-NZ Free Trade Agreement for the construction industry in New Zealand (10 NZRAB CPD Points) Moderator: Monique Surges, CEO - NZ German Chamber of Commerce 2.15pm - 2.45pm Build Products Ministry of Business, Innovation and Employment

11:30am - 12.15pm Security and Facilities Management “Best of Friends or Siloed Competitors” • John Braithwaite PRISMA Facilities Management Chris Proctor Senior Associate Security Consultant, Beca Applied Technologies 12.15pm - 1.00pm Building Intelligence: Leveraging Data to cut cost and carbon out of buildings • Brandon Van Blerk CEO, Tether 1.00pm - 1.45pm Risk Management – Basic Compliance or a tool for opportunity?

• Adam Lynch Principal Consultant, Reliance Risk New Zealand 1.45pm - 2.30pm Empowering Occupants: Enhancing User Comfort and Energy Efficiency in Centralised Air-Conditioned Spaces • Dr Eziaku O. Rasheed School of Built Environment, Massey University 2.30pm - 3.15pm Business excellence and quality management in the Facilities Management Profession • Raymond Tan Massey University

2.45pm - 3.30pm Digging into New Zealand’s Waste: Sustainable Solutions for Construction Waste Prof Terri-Ann Berry Co-Director of the Environmental Innovation Centre Nigel Benton President Auckland Region Master Builders Mark Roberts Senior Waste Planning Specialist at Auckland Council Trudy Atherton Builders Base

Auckland Showgrounds, 25-26 June 2024

irhace.org.nz

JUNE 2024

ACC Seminar Series DAY 1 TUESDAY 25 JUNE

DAY 2 WEDNESDAY 26 JUNE

10.15am - 10.30am Ringmastering Safety: Keeping Your Workplace Together

10.15am-10.30am Ringmastering Safety: Keeping Your Workplace Together

• Brenton Harrison, Desai Link & Andrew Evans The Circus of Safety Podcast

• Brenton Harrison Desai Link & Andrew Evans, The Circus of Safety Podcast

10.30am - 11.45am (Keynote) Adapting to Adversity • Lance Burdett Warn International

10.30am - 11.30am (Keynote) Leading through Whakaari

11.45am - 12.30pm

11.30am - 12.15pm ‘Recovery at Work - Helping Injured Employees Return to the Workplace’.

does the buck stop?

• Jim Roberts Partner, Hesketh Henry • Charlotte Robertson Senior Associate - Hesketh Henry 12.30pm - 1.15pm Confessions of a Health and Safety Auditor 101 • Anthony Stephenson Board Member, New Zealand Safety Council.

1.15pm - 2.00pm Demystifying psychosocial risk in the workplace • Diane Ah-Chan Learning Teams Inc 2.00.pm - 2.45pm The ultimate case study for AI: getting everyone home safe • Danu Abeysuriya and others – R/Vision 2.45pm - 3.30pm Refrigerant Realities: Engineering Smart Sustainable HVAC Systems for Tomorrow • Pete Hutson Black Diamond Technologies Ltd, Mitsubishi Electric New Zealand

• Tracy Hook Former CEO of Ng ti Awa Group Holdings

• Adam Jennings Head of Business Partnerships, ACC 12.15pm - 1.00pm Hazards are good! How to communicate about risk in a way that makes sense to everyone • Dan Davis NZ Operations Manager, HSE Global 1.00pm - 1.45pm Facing facts about injuries • James Whitaker Programme Lead, Preventable, ACC 1.45pm - 2.45pm Making you think - No case for the term “accident” • Paul Jarvie Employment Relations and Safety Manager, EMA 2.45pm - 3.30pm Augmented Reality • Ruggiero (Rino) Lovreglio Associate Professor, Massey University

BuildNZ, Facilities Integrate & The National Safety Show is your one-stop shop for cross-industry knowledge. Dive deep into key topics, critical issues, and future innovations shaping y Gain valuable insights, practical strategies to overcome industry challenges and earn CPD & LBP points – all for free!

Register to attend for free buildnz.com

15

Global Skills Challenge wraps up across the ditch New Zealand brings home a medal ahead of the international competition later this year Designed to simulate the conditions of the international competition and allow competitors, experts and other support team members the opportunity to meet ahead of Lyon 2024, the 2024 Global Skills Challenge in Melbourne attracted plenty of camaraderie.

Over the four-day event, 138 competitors from 17 countries put their skills to the test across 29 categories.

For the refrigeration, heating and air conditioning skill, five countries were competing – Australia, Austria, Brazil, Hong Kong and New Zealand – with our own Jack Butler bringing home a silver medal, with gold going to Austria and third place going to Australia.

Medals were presented at a formal closing ceremony which was attended by all competitors and their official

irhace.org.nz

JUNE 2024

delegations, senior vocational education and training (VET) and government representatives, WSA partners and guest of honour, the Ambassador of France to Australia, Pierre-André Imbert.

WorldSkills Australia CEO, Trevor Schwenke, says the event was a resounding success: “Touring the event sites, the spirit of competition was only outmatched by the sense of camaraderie and collaboration between nations.

Seeing officials and competitors mingling, discussing how they approach their skill back home is what it’s all about.”

Stay tuned for results from the 47th WorldSkills Competition in September.

Keeping the dairy industry moving

A small Waikato-based company shares their experience in providing HVAC&R solutions to the dairy industry, the challenges faced in this area today and what needs to change No one needs to be told that dairy means big business in New Zealand. In the year to March 2023, the sector contributed over $11.3 billion to the country’s GDP. Something that is often forgotten, though, is the essential role HVAC&R plays in the success of the industry: the quicker milk is cooled after milking, the better the quality when it is collected from the farm.

The Ministry for Primary Industries New Zealand Code of Practice for the design and operation of Farm Dairies has milk cooling standards that state that raw milk must: a. be cooled to 10°C or below within four hours of the commencement of milking; and b. be cooled to 6°C or below within the sooner of: i. six hours from the commencement of milking, or ii. two hours from the completion of milking; and c. be held at or below 6°C without freezing until collection or the next milking; and d. must not exceed 10°C during subsequent milkings.

While some companies are still offering R410A systems which are being phased out, says Brad, the R32 systems are providing King Cooling and Heap Pump customers with a viable, more efficient solution that will last beyond the phase-out of high global warming potential (GWP) refrigerants.

“We thought it was our responsibility to offer this to our clients,” he says. “Some companies are offsetting the carbon that they’re using instead of minimising the carbon that they’re using. Is this helping stop climate change? Planting forests is a good thing that should be done on a value system; it isn’t targeting the cause.

“There are two sides at work. We’ve got to look at the climate side of it and how that affects things. But we’ve also got to look at the efficiencies of the systems we put in because that affects the climate as well with the power usage going into them.”

Advice for the industry

However, with milk cooling accounting for about 30 per cent of the total energy costs of operating a dairy farm, paired with climate targets, farmers also need systems that are cost- and energy-efficient.

Moving forward, Brad says there also needs to be more focus on the maintenance of HVAC&R being used in the dairy industry across New Zealand, paired with the right training to provide customers with the right information.

Based in Te Awamutu, King Cooling & Heat Pumps is focused on helping its local customers achieve this.

“We need to be really proactive on refrigerant leaks and more rigid on maintenance to make sure there are no ongoing problems and that equipment is being upgraded when it needs. If technicians aren’t trained properly and haven’t got the skills or the knowledge, they can’t give the client good advice – not every farmer knows, they rely on us.

“With what’s going on in the industry and with climate targets, I had to look at other options of what was out there and what would be best moving forward for our customers’ efficiency,” says Bradford Johanson, director at King Cooling and Heat Pumps.

“We had to change the game from what was out there with refrigerant at the moment and the carbon tax charges that are attached to them. We found units being built in New Zealand using Temperzone units from a small company in Napier using R32 refrigerant with compressors on them instead of fixed speed, which means greater efficiencies again.”

“As an industry, we have to say what direction is needed.”

Do you provide HVAC&R equipment or services to the dairy industry in New Zealand?

IRHACE would like to hear your thoughts on current challenges and any solutions available to improve these.

Get in touch eo@irhace.org.nz and editor@irhace.org.nz

17

Winning bids and government contracts with compelling case studies and evidence-based claims How can you leverage the power of case studies to win tenders?

In the HVAC&R industry, securing tenders can be the key to unlocking new projects and growing your business across New Zealand. However, with numerous qualified contractors vying for the same opportunities, how can you make your bid stand out from the rest? One of the answers lies in the power of storytelling – specifically, through compelling case studies and evidence-based claims.

Case studies: showcasing your expertise Think of a case study as a mini-success story that highlights your company’s capabilities.

It’s your chance to showcase a past project where you excelled, demonstrating your problem-solving skills, adaptability and commitment to quality.

irhace.org.nz

JUNE 2024

Here’s what a strong HVAC&R-specific case study should encompass: • What made you different? Don’t just list generic services. Focus on what set your approach apart.

Did you implement a unique cooling system design to meet specific energy efficiency goals? Perhaps you devised an innovative solution to overcome a challenging building layout. Showcase your ability to adapt and think outside the box.

• Conquering challenges: Every project has its hurdles.

Did you encounter unforeseen logistical issues or unexpected technical difficulties? Detail how you tackled these challenges head-on. Highlight your team’s resourcefulness and ability to find creative solutions under pressure.

• Safety first: In the HVAC&R industry, safety is paramount. Demonstrate your commitment to a safe work environment by outlining your safety protocols and reporting performance. Mention any specific safety measures implemented on the project and showcase your team’s zero-incident record (if applicable).

• Stakeholder management and client communication: Successful project completion hinges on effective communication. Explain how you managed communication with the client throughout the project. Did you establish regular progress reports or client briefings? Highlight your ability to build rapport and manage stakeholder expectations.

• Innovation and methodology: Did you employ cutting-edge technology or develop a unique methodology to complete the project? Detailing innovative approaches showcases your commitment to staying ahead of the curve and your ability to apply creative solutions for optimal results.

Evidence is king: back up your claims so the reader takes you seriously A compelling case study is just one piece of the puzzle.

To truly elevate your bid, evidence is crucial. Here’s how to strengthen your claims with verifiable proof: • Testimonials: Positive feedback from satisfied clients speaks volumes. Include quotes or testimonials from past project managers or building owners.

• Align case studies to project needs: Don’t just throw in generic case studies. Choose examples that directly address the specific requirements outlined in the tender. This demonstrates your understanding of the project and your ability to deliver similar results.

• Quantify your success: Numbers add impact.

Quantify the positive outcomes of your past projects.

Did your innovative cooling system design result in a measurable reduction in energy consumption?

Mention the percentage decrease to showcase your focus on efficiency and cost savings.

• Evidence for every claim: Don’t leave any statements unsupported. Back up every claim made in your case study with relevant evidence, such as testimonials or pictures. This builds trust and credibility with the evaluator.

The power of proof In today’s competitive HVAC market, a well-written bid with compelling case studies and evidence-based claims can be the deciding factor. By showcasing your past successes and providing verifiable proof of your capabilities, you can demonstrate your commitment to quality, innovation and client satisfaction.

So, invest the time to craft powerful case studies, gather supporting evidence, and watch your bids rise above the rest. In the world of tenders, proof is the key to securing your next big project.

• Visual storytelling: Pictures are worth a thousand words. Include high-quality images of completed projects showcasing the scope of your work and the finished product.

• Community support: Highlight your commitment to the local community by including letters from recruitment agencies confirming your use of local labour or thank you notes from community organisations for your involvement in local projects.

• Supporting letters: For specialised projects, consider including letters from material suppliers or equipment manufacturers verifying your expertise in using their products.

The winning formula: combining case studies and evidence By weaving compelling case studies with verifiable evidence, you create a powerful narrative that showcases your company’s capabilities and builds trust with potential clients. Here’s how to integrate them effectively:

Words by Jason Cooney Jason Cooney is the Director of Tsaks Consulting NZ, a bid and tender writing consultancy specialising in helping tradies, contractors and engineers across New Zealand win Government and private sector contracts.

19

ARBS 2024 in Sydney Words by Gina McMaster, HVAC&R Centre

Gina McMaster was on the ground in Sydney at Australia’s largest HVAC&R and building services event The ARBS exhibition is a significant event in the HVAC&R and building services industry, showcasing the latest technologies, products, and innovations. Held at the International Convention Centre (ICC) in Sydney, the event featured numerous exhibitors, industry speakers, and opportunities for networking.

Event highlights Visitors: The exhibition attracted a remarkable 9,378 visitors, reflecting the high level of interest and engagement within the industry.

Exhibitors: Over 350 exhibitors participated, providing a comprehensive view of the current landscape and future trends in HVAC&R and building services.

Seminars and speakers: The event featured 45 seminars and 102 speakers, offering attendees valuable insights, educational sessions and opportunities to learn from industry experts.

irhace.org.nz

JUNE 2024

Overall, the ARBS 2024 exhibition not only highlighted the critical role of HVAC&R in the built environment but also emphasised the industry’s ongoing commitment to innovation and excellence.

RLNZ and IRHACE attended the seminar which provided an introduction to the AIRAH Best Practice Guide to Commercial Kitchen Exhaust Management.

AIRAH and IRHACE have agreed to work on a cross-country basis, covering both Australia and New Zealand, to produce a document that improves commercial kitchen exhaust management practices.

Watch a little video version here...

During the ARBS conference, IRHACE had the opportunity to attend the Mix and Mingle event at the Rooftop Shelbourne Hotel on the Wednesday night. This provided a valuable chance to connect with industry associations AIRAH and ASHRAE. The event featured speeches from prominent industry leaders, including Ginger Scoggins, President of ASHRAE, and Sami Zheng, CEO of AIRAH. Additionally, Mikaila Ganado, the new President of AIRAH, expressed gratitude to Paul Jackson for his dedication and hard work during his tenure as President. The evening also included a special moment where Liisa Hill and Paul Jackson presented service awards to AIRAH members, recognising their dedication ranging from 10 to 40 years.

21

irhace.org.nz

JUNE 2024

23

HVAC&R Centre has prepared its submission to the Climate Change Commission’s Draft advice on Aotearoa New Zealand’s fourth emissions budget Represent the bulk of New Zealand’s HVAC&R industry, HVAC&R Centre’s submission is specific to the global warming impact of refrigerant GHG emissions, including but not limited to synthetic refrigerants (F-gases), as they relate to the Commission’s Draft advice on Aotearoa New Zealand’s fourth emissions budget irhace.org.nz

JUNE 2024

In summary We have not submitted to the Commission’s 2024 review of the 2050 emissions target because we believe that any estimate of refrigerant GHG emissions in 2050 is highly sensitive to policy choices made in this decade. To quote the Commission’s consultation document for the 2024 review of the 2050 emissions target: For any target to be effective, it needs to be relevant, achievable and timely. Over time, circumstances can change which affect a target’s impact and influence.

However, the Commission when considering the 2050 emissions target should consider the matters we have raised in this submission.

Unfortunately, the policy approach that has been taken by MfE with respect to managing the global warming impact of refrigerants, and by extension certain assumptions made by the Climate Change Commission, fail to address reality, this being despite the previous submissions our organisations have made.

Accordingly, we do not consider that the Commission’s target for annual F-gas emissions of 0.6 MtCO2e in the fourth emission budget period is unachievable unless there is a major policy rethink relating to how refrigerant GHG emissions are managed.

In our opinion the Emission Reduction Plan’s (ERP) Baseline projected emissions estimate of circa 1.2 MtCO2e (refer ERP Chapter 12 Fig 16.2 below) by the end of the fourth emission budget period would likely be a best-case outcome.

The previous government’s Priority Waste Product policy had the unintended consequence of continuing the historical focus on end-of-life F-gas recovery and destruction, the following realities either being ignored or not being given due consideration:

F-gases (direct fugitive Scope 1 GHG emissions) 1. The impact of F-gases on global warming and the opportunity to mitigate their impact is greater than is generally understood!

policy was poorly conceived and managed. In particular, the co-design for the regulated Product Stewardship Scheme (PSS) had a predetermined outcome whereby the existing voluntary Refrigerant Recovery (Recovery) PSS for synthetic refrigerants, now calling itself Cool-Safe, would morph into the regulated PSS to continue with its sole focus on F-gas recovery and destruction.

3. Historically very little F-gas has been recovered at end-of-life, the bulk of F-gases end up being vented to the atmosphere from operating systems, principally due to ongoing leakage over the system’s life.

4. The fact that the bulk of hydrofluorocarbons (HFCs) are vented to the atmosphere, have high GWPs and relatively short atmospheric lives, means the critical need is to mitigate their impact on global warming during the current decade when the world most needs to respond to global warming.

5. There is a disconnect between what the Kigali Amendment’s (Kigali) phase-down of bulk HFC imports will achieve in terms of the mitigation of F-gas GHG emissions and the overhanging emissions risk of the F-gas refrigerant bank.

F-gases (indirect Scope 2 & 3 GHG emissions) 6. All refrigerant types cause GHG emissions, not just the F-gases, the historical focus on end-of-life recovery and destruction of F-gases has ignored the opportunity to mitigate the indirect Scope 2 and 3 refrigerant GHG emissions. In particular, energy efficiency should be a primary focus for any scheme seeking to mitigate Scope 3 refrigerant GHG emissions.

The lack of supply chain visibility 7. The fundamental problem facing refrigerant management is the lack of visibility through the supply chain, there being no visibility at the operating system level, you can’t effectively manage what you can’t measure! The lack of quality data is reflected in estimates of refrigerant GHG emissions having high degrees of uncertainty.

Each of the above matters are addressed in detail in the full submission. Read online here.

2. The inclusion of F-gases as a priority waste product under the previous government’s Priority Waste Product

25

irhace.org.nz

JUNE 2024

HVAC&R safety reminder A steel ductwork collapse in the US is a reminder of the need for adequate training and safety in the industry Thankfully this is not a scene from New Zealand.

However, the falling of a large portion of steel ductwork in Aurora, Colorado, has been an important reminder of what can go wrong if safety advice is neglected.

At the time of the collapse, the lawsuit that was ultimately filed claims the ductwork improperly contained a significant amount of water, showed significant rust corrosion of the internal surface, and that the cable suspension system was grossly insufficient to support the ductwork.

“This case arises from the collapse of air exchange ductwork in the indoor pool at the Gaylord Rockies Resort and Convention Centre. Due to poor design, poor construction and poor maintenance, several hundred feet of four-foot diameter steel ductwork – weighing thousands of pounds – fell 35 feet to the concrete floor below, crashing into several people,” the lawsuit says.

“The ductwork struck John Markiewicz in the head, driving his body into the concrete floor, shattering his skull, causing multiple rib fractures, a bruised heart, and a traumatic brain injury. He was unconscious when paramedics arrived and hip injuries are so severe, it is a miracle he is still alive today.”

The same is said for a 13-year-old girl, who, as she tried to escape, had the ductwork knock her out of a hot tub.

This resulted in the ductwork snapping her pelvis in half, shattering her hip, and causing so much internal hemorrhaging that without blood infusions, emergency surgery and the efforts of emergency medical personnel, she would have bled to death.

“Tonnes of steel ductwork should not fall from the ceiling, and these life-changing injuries should never have happened,” the lawsuit summises.

Falling into a pool with between 50 and 100 people in it, the ductwork injured six people.

27

What to know: Importing and exporting hydrofluorocarbon gases (HFCs) With the risks involved, permits are required to import or export bulk HFC gases into or out of New Zealand

What’s classified as ‘bulk HFC gases’?

Under law, according to the Environmental Protection Authority, ‘bulk HFC’ means new or recycled HFC gas in an unprocessed form – alone or in a mixture – in a container used for gas transport or storage. However, HFCs in manufactured products, such as car airconditioning systems or fire extinguishers, do not need an import or export permit.

Bulk HFC importing limits There are also restrictions on how much HFC gas can be imported into the country. This is to encourage the move to alternative gases or HFCs with lower global warming potential (GWP).

“To reduce our reliance on ozone-depleting gases, the man-made gases collectively known as hydrofluorocarbons (HFCs) were developed. They are also known as one of the fluorinated gases, ‘F-gases’, and individually under their chemical names (prefixed by ‘HFC-’, ‘R-’, and sometimes under the Freon brand name).

“Although HFCs have a smaller impact on the ozone layer, they are potent greenhouse gases which warm the atmosphere and contribute to climate change.

Reducing levels of HFCs will avoid up to 0.5 degrees of global warming by 2100. So in 2016, the Montreal Protocol was amended (the Kigali Amendment) to ensure that industrialised and developing member countries reduce their HFC production and consumption over time.”

Graph showing annual limit on importation of HFCs into New Zealand 2020-2036 (in CO2-equivalent tonnes)

irhace.org.nz

JUNE 2024

Types of permits and when to apply The type of import permit, and when you need to apply, depends on the origin of the HFC (new or recycled).

The Perfect Commisioning System

Type of import: To import new bulk HFCs Type of applicant: Applicants with grandparented eligibility*

testo 570s, the digital

Permit needed: Apply for a grandparented import permit

manifolds with 4-way

When to apply: By 1 Sept in the calendar year before the year of import

and large data

Type of import: To import new bulk HFCs Type of applicant: All applicants Permit needed: Apply for a special import permit When to apply: By 1 July in the calendar year before the year of import Type of import: To import recycled bulk HFCs Type of applicant: All applicants Permit needed: Apply for a recycled HFC import permit

testo 570s

Smart Digital Manifold

valve block, Bluetooth memory, are opening up the future of intelligent longterm measurement on refrigeration and HVAC Industries.

testo 770-3 Clamp Meter

testo 770-3, the most powerful clamp meter, ideal for current

When to apply: Any time

measurement in Type of import: To import an equivalent amount after exporting new bulk HFCs

switching cabinets.

Type of applicant: All applicants

measuring tasks in

It is perfect for

Permit needed: Apply for an exporters’ import permit

tight application environments.

When to apply: Any time after the export takes place, but note that the proposed import must take place in the same calendar year as the export

testo 560i

Digital Scale & Valve

testo 560i Digital Refrigerant Scale and

Find out more about grandparented eligibility and transferring grandparent eligibility and learn more about importing and exporting HFCs on the EPA website.

intelligent valve for automatic and precise refrigerant charging according to target superheat, subcooling, and refrigerant weight.

www.eurotec.co.nz

09 579 1990

sales@eurotec.co.nz

29

Subscribe to the RLNZ Newsletter What training is available?

What standards and legislation should you know about?

The RLNZ Newsletter features various training updates and events from the HVAC&R industry in New Zealand.

Subscribe on LinkedIn

Known for his results-driven approach to sales, Andrew is also a vocal advocate for effective organisational governance.

Happy World FM Day This year’s theme was to inspire, integrate, innovate and ignite your career in FM. The team at 1st Mechanical celebrated their FM Whānau.

Holyoake 3D technology RLNZ was spotted geared up with the Holyoake 3D headset and handsets at the Price Holyoake stand at ARBS. This gives a 3D viewing experience of a medical room, complete with airflow and moving parts.

irhace.org.nz

JUNE 2024

RLNZ Board RLNZ Board has announced the appointment of two new trustees: Malcolm Miller of Absolute Air Conditioning and Andrew Bradley of Huddleston. Brendan Clarkson is stepping down from his position at RLNZ due to family commitments.

Andrew Bradley, the Director of Huddleston Ltd and Huddleston Australia Pty Ltd, founded his companies in 2016 to provide quality products to HVAC&R and electrical professionals globally.

Malcolm Miller brings extensive experience in governance and leadership to the board. He has been the company director of Absolute Air Conditioning and Refrigeration Ltd since 1989. His background includes serving as President of Rotary, Chair of CCCANZ, and Director of RRNZ/ RRO. Additionally, Malcolm is a qualified Level 4 Refrigeration Engineer and an Independent Qualified Person (IQP).

With these new appointments, Malcolm and Andrew join existing trustees Matt Birch and Mark Meyer.

Malcolm Miller will also take on the role of RLNZ Chair.

ARBS 2024 Industry Awards RLNZ congratulates the winners of the ARBS 2024 Industry Awards.

Young Achiever Award: Travis Schick, NRG Services.

Project Excellence Award: A.G. Coombs and LCI: Allianz Stadium - Mechanical and HVAC Services.

Software/Digital Excellence Award: Exergenics - Cloud-Based Chiller Plant Optimisation Software.

Outstanding Industry/Training Award: Beijer Ref Academy CO2 Safety & Systems Training, delivered by SCM REF AU and Superior Training Centre Product Excellence (Refrigeration) Award: P Series Refrigerator, Hussmann Oceania.

Product Excellence (HVAC) Award: Thermal XR, Graphene Manufacturing Group Ltd.

Speakers at HVAC&R Hub Coming up on June 25–26 at the HVAC&R Hub in Auckland Showgrounds.

Pete Hutson, F.IRHACE, Black Diamond Technologies Ltd, Mitsubishi Electric New Zealand, talks on Refrigerant Realties – Engineering Smart Sustainable HVAC Systems for Tomorrow.

Mark Meyer, M.IRHACE, Danfoss, with Chris Arvidson, M.IRHACE, RCL, talk on Data Centre Cooling Technologies.

Ana Taranenko, AE Consulting, Chair of CIBSE NZ, talks on Back to Basics: Mastering HVAC System Selection for Sustainable Outcomes.

Dr Eziaku O. Rasheed, School of Built Environment, Massey University, talks on Empowering Occupants: Enhancing User Comfort and Energy Efficiency in Centralised Air-conditioned Spaces.

FEATURED COURSE This new course is designed to give you an understanding of how to deal with highly flammable A3 refrigerants. Unlike the move from R410A to R32, the installation of A3 refrigerant-based systems brings a complex set of new challenges.

Our previous flammables course has been redeveloped and made fit for purpose and is now being released back to the industry as A3 Refrigerant Awareness.

31

D P C n Ear ! s t n i Po

Designing with ventilation louvres

1pt Fresh Air Heat Recovery Ventilation

Commercial kitchen exhaust systems

1pt

1pt

The aim is to educate the HVAC&R industry focused on the design and technical context in which the product may be applied, not on the product itself. This may include seminars, research papers with quiz questions, practical workshops, short courses, events, online learning or site visits.

COURSES & WEBINARS

RECOMMENDED

Provider approved CPD learning courses that include technical information of the highest standard and relevant to New Zealand.

The CPD system also includes an area for recommended activities that do not earn CPD points due to length of time or not of a technical nature.

EVENTS Selected events that meet the level of technical information and relevant to New Zealand.

TECHNICAL

DISCUSSION BOARD IRHACE members enjoy being invited to technical discussions on CPD activities, projects and other technical issues.

Technical activities that are educational and well balanced.

To earn CPD points you must be an IRHACE member irhace.org.nz 2024member and enhance your professional development Become JUNE an IRHACE

June 2024

IRHACE welcomes its new members and congratulates those member milestones.

Member Milestones 10 Years Melvyn Furniss Ron Findlay Matthew Pervan 20 Years Mark Galbraith Brian Skiffington

The countdown to HVAC&R Hub 2024 is on. This event, dedicated to heating, ventilation, air conditioning and refrigeration, is highly anticipated by industry professionals. It’s a platform for the latest innovations, networking opportunities and educational sessions.

HVAC&R experts will be presenting speeches on topics including Refrigerant Realities: Engineering Smart Sustainable HVAC Systems for Tomorrow; Data Centre Cooling Technologies; Back to Basics: Mastering HVAC System Selection for Sustainable Outcomes; and Empowering Occupants: Enhancing User Comfort and Energy Efficiency in Centralised Air-conditioned Spaces.

Don’t wait, register for FREE.

30 Years Hamish Panton 40 Years Christiaan Kitzen Anthony Bushell

33

USE A CCCANZ MEMBER

As a CCCANZ member you benefit from the collective strength of the organisation which enhances your reputation as a responsible and reliable business in the HVAC&R industry.

Branding – logo and promotion

Trade offers and deals

Discounts with N3

Promotion and marketing

Standards library

Networking opportunities

Training scholarship

Professional development

Special rates for advertising

Latest industry news

Contracts and agreements

Sign up today and find out more at cccanz.org.nz irhace.org.nz

JUNE 2024

Member company listing covering New Zealand from Northland to Southland and in between.

MEET THE BOARD Get to know the CCCANZ team

What is your background?

Chartered Accountant (CA) New Zealand and Certified Public Accountant (CPA) in Australia with extensive experience in the finance field of which 10 years encompassed HVAC&R and electrical industries.

What is your current business role?

I am a shareholder and the executive director of RCR Infrastructure Limited – a facility management company specialising in everything from solar to ventilation.

You believe in continuing your career development, so what have you achieved recently?

Yes, I have just recently completed the Icehouse Owner Manager Programme 60 and HarvardX’s Energy Within Environmental Constraints course.

Name: Garry Ko Role: Treasurer and board director

And finally, how about those pictures of you dressing up as a king?

It was a medieval evening presented by Waterstone Group. I was presented with the King Edward V Award for Services to Infrastructure (Practice) by the ACT Party’s infrastructure spokesperson, MP Simon Court.

MEMBER HIGHLIGHT Oceania Gas Safety Gas proving systems, gas interlock systems, water leak detection and air quality monitoring. OGS is the nominated distributor for S&S Northern product sales in Australia, New Zealand and the Pacific Islands.

Contact David Bottom www.oceaniagassafety.com 021 238 6990.

35

Member company listing c New Zealand from Northla Southland and in between

Sole Trader Checklist IRD’s easy-to-follow checklist for sole traders provides clear steps if you’re wondering how to get set up.

This feedback on the checklist from one sole trader says it all: “Having clear advice with proper procedures and guidelines to follow was half my battle in trusting what I am doing. Would have been weeks or months of studying.”

SOLE TRADE CHECKLIST irhace.org.nz

JUNE 2024

covering and to n.

BUSINESS

What is an NZBN and what’s its role in business?

The NZBN is a unique identifier for your business.

The New Zealand Business Number (NZBN) is a globally unique identifier, available to every Kiwi business. Whether you’re self-employed or a major corporation, there’s an NZBN for you.

Your NZBN makes doing business faster and easier because it links to your core business information (known as Primary Business Data). This includes things such as your trading name, phone number or email.

That means anyone you do business or interact with (such as suppliers or customers) can easily, quickly and digitally access all the details they need about your business in order to work with you. You won’t have to keep repeating this information or updating it in multiple places. With an NZBN your business becomes part of a single, searchable register for all Kiwi businesses.

The New Zealand Business Number (NZBN) Act came into effect in 2016, enabling all businesses to be allocated or register for an NZBN. This includes government agencies who are working to implement the NZBN into their systems and processes. The flow-on effect will be that agencies can get core business information from the NZBN Register, eliminating the need for businesses to provide and update it.

37

IRHACE Industry Journal is a premium magazine for the refrigeration, heating and air conditioning industry with unique quality content that reaches a desirable audience and is free to download.

Contact us at admin@irhace.org.nz and be a part of our next issue now.

CONNECT WITH US HVAC&R INDUSTRY NEWS ALL IN ONE PLACE

irhace.org.nz

JUNE 2024