Issuu

ON-FARMSERVICEAVAILABLE ASKFOR DETAILS

With brake testing deemed vital at every safety inspection, it should be planned as a key part of the

Our rolling road comes equipped with extra wide rollers to accommodate all makes and models of trailers, and our extended workshop availability means your trailer will have minimum down time and be back on the road before you know it!

The rolling road shows the condition and efficiency of each axle in great detail helping to identify the specific location and cause of issues, as well as a balance reading on both axles to determine if one brake is working more or less than the other. Unbalanced axle braking could cause the trailer to pull to one side, particularly in the wet, where it could possibly lock a wheel and cause flat spots on the tyres.

Ensure that your handling equipment is safe and legal with Thorough Examination inspections. When your inspection is finished, you will receive an official Report of Thorough Examination.

By law, all lifting equipment, which includes forklifts, telehandlers and excavators, needs a regular Thorough Examination Certificate. STAY SAFE, STAY LEGAL!

MACHINERY FOR SALE

£82,000 + VAT

KUBOTA M6142 TRACTOR (2023)

Ref. AG29182

C/W - 142HP, front suspension, 4WD, diff lock, 24/24 powershift gearbox, rear lift buttons, air con, 12x front weights, suspended seat, 4 mechanical spools, Isobus 7” monitor, Kubota loader & work lights. Tyres - R:520/70 R38 F:420/70 R28.

£55,000 + VAT

KUBOTA M5-112 TRACTOR (2023)

Ref. AG27634

C/W - 115 HP, 36/36 gears, LHR, 40kph, passenger seat, 4WD, 2 manual spools, work lights, hydraulic pick up hitch, air ride seat & LA2000 loader with euro attachment.

KUBOTA M5111 TRACTOR (2018)

Ref. 11011045

C/W - 113HP Kubota LA1854 loader, air seat, passenger seat, 2 manual spools & air con. 1700 hours.

KUBOTA RTV- X1110

Ref. AG28765

C/W - Offering greater power and more versatility thanks to a powerful and economical 24.2HP Kubota 3-cylinder liquid cooled ETVCS diesel engine.

£79,950 + VAT

KUBOTA M7173 TRACTOR (2022)

Ref. AG20842 Hours: 1100

C/W - 170HP, 30F/15R 50kph powershift trans with creep, front axle suspension, dromone PUH, auto & spring stabilisers & joystick.

Tyres - F:540/65R28 R:650/65R38. Warranty until 10/26 or 3000 hours from 8/22.

KUBOTA R090 WHEEL LOADER

Ref. AG29509

C/W - 61.2HP, air conditioned & heated CAB, wide tyre,Volvo hitch, flashing beacon, front LED work lights, differential lock & hydrostatic transmission. Retractable orange seatbelt with alert function.

KUBOTA BX261 COMPACT TRACTOR Ref. GC28108

C/W - HST, ROPS, 26HP, high-low gear shift, 4WD, & turf tyres.

GR2120S RIDE ON MOWER Ref. GC29280

C/W - 21HP, 3 cylinder diesel engine & 48” cutting deck

£62,500 + VAT

KUBOTA M7173 TRACTOR (2021)

Ref. AG20918 Hours: 982

C/W - 170HP, 30F/15R 50kph powershift trans with creep, front axle suspension, dromone PUH, auto & spring stabilisers & joystick. Tyres - F:540/65R28 R:650/65R38 tyres. Warranty until 10/26 or 3000 hours.

KUBOTA M6-141 UTILITY TRACTOR (2024)

Ref. AG29629

C/W - 140HP, 32/32 gears, creep, 40kph, 540/1000 PTO, 4WD, 2 x manual spools, hyd. hitch, air ride seat, 6.1t rear lift, tool box & instructor seat.

KUBOTA RTV-520 UTILITY VEHICLE (2023) Ref. AG22134

C/W - Offering comfort and performance with a powerful 2 cylinder engine delivering performance on any terrain and large easy access cargo area.

£9,495+ VAT

KUBOTA EK1-261

COMPACT TRACTOR

Ref. GC29055

C/W – 25HP, ROPS, turf tyres & manual gearbox

KUBOTA

MACHINERY FOR SALE

£65,000+ VAT

KVERNELAND T4 TRAILED SPRAYER

Ref. AG24945

C/W - 24m boom width, 4000 ltr tank, IM Grip, ISO boom guide comfort, mud guards, iXclean pro valve set, Ergo drive T & 520/85 R42 tyres.

VAT

KVERNELAND TL GEO FERTILISER SPREADER (DEMO)

Ref. AG24307

C/W - 4x 5t weigh cells, central reference sensor, mudguards, stone guards, Isobus, folding hopper cover, hopper grid, & 12-45m spread.

KVERNELAND TLX GEO FERTILISER SPREADER (2017)

Ref. AG28946

C/W - High lift vanes, hopper emptying kit, folding hopper cover, stone guards, mudguards, hopper windows, ISOBUS. **NO CONTROL SCREEN**

£11,950+ VAT

KVERNELAND FLATLINER 3005

Ref. AG27921

C/W - 3m rigid, 5 pro lift legs, shear bolt protected legs & double DD rear roller.

£19,950+ VAT

KVERNELAND NGH 401 4m HYD FOLDING POWER HARROW

Ref. AG17711

C/W - Hydraulic folding, 300HP gearbox, quick, fit tines, 575mm packer roller & carbide scrapers.

KVERNELAND TL 1875 FERTILISER SPREADER

Ref. AG24944

C/W - 4x 5t weigh cells, central reference sensor, LED road lights, mudguards, stone guards, Isobus, folding hopper cover, hopper grid & 12-45m spread.

KVERNELAND DTX 300

CULTIVATOR Ref. AG29657

C/W - 3m working width, 180x180x10mm main frame, 60cm tine spacing, pro lift legs, 2 rows of cultivation discs, DD steel disc packer & road lights.

KVERNELAND FRD 280 FLAIL MOWER (2018)

Ref. GC29601

C/W - 2.8m cutting width, front or rear mounted.

KVERNELAND NGS 4M POWER HARROW (2015)

Ref. AG25726

C/W - 4m working width, 575mm rear tooth packer, 435 rpm rotor speed, rigid levelling board & Qfit points.

VAT

KVERNELAND HL 1875 PRO FERTILISER SPREADER

Ref. AG24308

C/W - Hydraulic control, hydraulic hose kit for L/R spreading (2 x DA valve) & hopper emptying kit.

£14,750+ VAT

KV 3M QUALIDISC CULTIVATOR

Ref. AG24321

C/W - 3m working width, hydraulic depth control, levelling fingers, actipack skids & knives & lighting kit.

KVERNELAND FHP 200 MOWER (2021)

Ref. AG29181

C/W - 2m working width, double skin, hydraulic break back & large rear roller.

MACHINERY FOR SALE

KVERNELAND DIRECT TINE

TS-DRILL (2024) Ref. AG29536

E-BAS. C/W - Hopper extension, pre emergence markers, electric half width shut off, narrow tines. 4 x tramline valves, easily accessible ELDOS metering system. Rear mounted levelling harrow, hydraulic fan drive & road Lights

KVERNELAND DIRECT TINE

TS-DRILL (2024) Ref. AG29523

E-COM. C/W - Hopper extension, pre-emergence markers, electric half width shut off, narrow tines, 4 x tramline valves, easily accessible ELDOS metering system. Rear mounted levelling harrow, hydraulic fan drive & road Lights

KVERNELAND LS PLOUGH

Ref. AG29659

C/W - 5 furrow (extendable), 250 hp head stock, no 28 bodies, extra stays, knock on points, mechanical front furrow, quick fit points, disc coulter, maize skimmers, 320/60-12TT depth/ transport & transport lock.

KVERNELAND FHP PLUS 230 MOWER (2019)

Ref. AG29622

C/W - Rear mounted offset with 2.3m working width. R/H offset, hammer flails, wide angle PTO & accumulator.

GRANGE MACHINERY 6M LOW DISTURBANCE TOOLBAR (LDT)

Ref. AG20289

C/W - cat 3 & 4 linkage, 12 x low disturbance legs, 12 x tungsten points and hard faced legs, hyd front cutting discs, automatic wing folding rams, 4 x double acting hyd supply, 1x heavy duty clevis, ISOBUS Connection. £37,950+ VAT

£19,950+ VAT

GRANGE MACHINERY 3M STRIP TILL (EX DEMO)

Ref. AG24330

C/W – 3m working width, 50cm spacing, 6 row, shearbolt protection & inline cultivation discs.

GRANGE MACHINERY 4M LDL

Ref. AG19869

C/W - Cat III & Cat IV linkage, 8x low disturbance legs, standard tungsten points, hard faced lower legs, hyd front cutting discs & shoulder press ring packer.

£16,750+ VAT

GRANGE MACHINERY 4M CCT

Ref. AG19879

C/W – CAT 3 and CAT 4 linkage, X8 low disturbance loosening legs at 0.5m leg spacing with a range of 300mm working depth. X8 tungsten points & X8 hard faced lower legs.

£14,000+ VAT

GRANGE MACHINERY GRASS LAND LOOSENER (GLL) (2022)

Ref. AG28436

C/W - 3m working width, hydraulic front cutting discs, 6 auto reset legs at 50cm spacing, shoulder press rear packer & manual depth control.

WHAT IS HARDOX®?

MACHINERY FOR SALE

Hardox® is a wear plate; structures made of Hardox® weigh less and last longer than those made from mild steel. A tipper body made from Hardox® is more durable due to the unique combination of hardness and toughness. Using Hardox® allows for a body design with a minimum number of

beams on the outside.

LIVESTOCK TRAILERS

FLAT TRAILERS

LIVESTOCK CONTAINERS ARE FABRICATED ALMOST ENTIRELY IN ALUMINIUM GIVING A STRONG BUT LIGHTWEIGHT, DURABLE CONSTRUCTION.

The livestock container is fully welded; the pressed side sheets are welded to box section posts at 1150mm intervals, and the floor is welded all round. The fully welded design prevents effluent from leaking through onto the trailer.

FLAT TRAILERS CAN BE SUPPLIED WITH 4MM STEEL OR 28MM KERUING FLOORS FOR THE SAME PRICE. The standard Flat Trailer is used with our Livestock Floats, for carrying a float we recommend a Keruing floor and 435/50Rx19.5 tyres. Please get in touch for more information.

BALE TRAILERS

BALE TRAILERS FROM 26FT TO 36FT CAN BE BUILT BASED ON OUR STANDARD FLAT TRAILER RANGE. We have two models available, there is a trailer for two rows of bales and the other version carries three rows high. The trailers can be used for round or square bales, the important point is that the retaining arm must be at least half way up the bale to keep it securely on the trailer.

LOW LOADERS DUMPER TRAILERS

LOW LOADER TRAILERS ARE FITTED WITH A 45MM KERUING FLOOR. HYDRAULICALLY OPERATED RAMPS ARE STANDARD ON 15 TONNE AND 22 TONNE MODELS. Every trailer is custom built, there are a wide variety of optional extra items available to choose from. We can supply open tread ramps, timber clad ramps or steel ramps, the steel ramps can be galvanised or paint finished.

WE PRODUCE THREE TYPES OF CONSTRUCTION TRAILERS WHICH ARE AS FOLLOWS: Construction Dumper trailers with a scow tail, Construction Monocoque trailers which have a flat floor and the Construction PRO trailers with a Hardox® body. Please get in touch for more information.

GX RANGE ROAD KING PRO SERIES

MACHINERY FOR SALE

SPEARHEAD MULTICUT 650

PROLINE Ref. AG29120

C/W - Walking centre and wing axles, built in shock absorbers on wing wheels, 6.2m working width (6.5m overall width), 5 rotors with 6 blades, 21 spline shaft, Rear LED light kit & hyd folding.

SPEARHEAD ROLLICUT 170

Ref. GC13814

Designed for light-duty amenity mowing gives a high-quality finish in material up to 20mm. Excels in parkland, golf course, orchard and topping applications and is the perfect choice for mounting on compact tractors.

SPEARHEAD TWIGA S50 HEDGECUTTER

Ref. AG29643

C/W - Hydraulic proportional controls, rear lights, 1.2m direct drive head, T flails, manual rear roller, cable rotor reverse & 3 point linkage mounting

McCONNEL PA93E HEDGECUTTER

Ref. AG29164

C/W - Electronic controls, T flails, forward reach, 1.2m head & direct drive

SPEARHEAD MULTICUT 480

PROLINE Ref. AG29390

C/W - 4.6m working width, 6 blades per rotor & walking rear axle.

SPEARHEAD MULTICUT 300

Ref. AG29378

C/W - 3m cut, manual height adjustment, floating 3 point linkage frame, front and rear chain curtains, side skids, 2 rotors with 2 blades per rotor & heavy duty industrial tyres.

SPEARHEAD ROLLICUT 500 (2021)

Ref. AG21003

C/W – Working width 4.91m, transport width 2.66m, cutting height 10mm – 120mm, 27 fine cut, high lift blades & blade tip speed 87m/s

SPEARHEAD S32 HEDGECUTTER

Ref. AG27386

C/W - Twiga Compact S32, with mini pilot electric controls, rear lights & arm float with 1.0m head.

£11,950 + VAT

VICON XTRA 632N MOWER CONDITIONER (2022)

Ref. AG24127

C/W - 3.2m Mower, 3 blades per disc, nylon mower conditioner, central mounted mower deck to allow for contouring & safety breakback.

SPEARHEAD SNIPER 270

Ref. AG29655

C/W - hydraulic side shift, 3 point linkage mounting, rear roller & hammer flails.

Ref. AG29179

C/W – 2.2m wide pick up, net wrap only, 48,492 bales done.

POTTINGER NOVA CAT 265 MOWER CONDITIONER

Ref. AG28721

C/W - Nylon tines in the conditioner, hydraulic fold & 6 discs.

LELY WELGER RP435 BALER (2011)

MACHINERY FOR SALE

BERTI

TA/PS 200CM (TEAGLE) (2016)

Ref. AG25714

C/W - L/H offset, 2m working width, hyd offset, rear roller, large hammer flails & PTO drive.

TONG SWIFTLIFT EXTENDO 900 ELEVATOR

Ref. AG29541

C/W - 900mm wide belt, 3-phase electrics, variable speed drive, auto slewing platform, hopper, drawbar, 20m mains cable, power transmission dual drive, & luffing head.

ROCK CHIPPER VENOM CVR-85

Ref. AG27803

C/W - 13HP Briggs & Stratton OHV petrol engine, maximum rpm: 3600, shredding system: 2 blades on rotor & 1 counter-blade on the chassis.

SAMON SU18A TOPPER (2016)

Ref. AG29023

C/W - Front or rear mount, 72” side delivery, mechanical drive, PTO shaft, 3 rotating axles with each 2 knives & double hydraulic height adjustment.

IMANTS ROTOKNIFE (2010) 1.8m

LINEAR AERATOR Ref. GC14487

Relieve surface compaction, improve aeration, reduce thatch build up and remove surface water. The disc rotoshaft can be set to 5 positions offering flexibilty in working depths (150mm - 50mm spacing). Ideal rootzone enhancement tool for both warm and cool season grasses and can be used as a surface smoothing roller.

CASE CT5080 COMBINE (2002)

Ref. AG24626

C/W - 24ft header and header carrier. 4129 hours & regularly serviced.

MARSHALL BC 25 12T TRAILER (2019)

Ref. AG29162

C/W - 25ft trailer with hay gates.

SAMON SU18A TOPPER (2016)

Ref. AG29007

C/W - Front or rear mount, 72” side delivery, mechanical drive, PTO shaft, 3 rotating axles with each 2 knives & double hydraulic height adjustment.

TOMLIN TFM FLAIL MOWER

Ref. GC14393 1.25m in good condition

£1,750+ VAT

BAILEY SILAGE KITS (USED)

Ref. AG3083

C/W - 6.6m long to fit either Bailey 14t roots or 16t TBs and 18t Beeteaper, year 2018 onwards, (new shape) square back square bodies. Pictures available on request.

HI SPEC T20 DIET FEEDER (2015)

Ref. AG24061

C/W - 20m3 capacity, twin auger, front right and rear right door, twin axles, 435/55 R19.5 tyres, front digital weigh screen & road lights.

We stock a wide range of spares, workshop equipment and consumables in all our depots.

Contact your local parts department for details

AVAILABLE FOR LONG OR SHORT TERM HIRE

Feeding more efficiently with Siloking

JH Dorrington’s 300-cow herd and its followers have been fed at White House Farm, Dunsby, Lincolnshire using a total mixed ration for decades – the accuracy of rations helping the farm to maintain output and preserve milk quality.

“We’re running with an average of 4.5% fat and 3.5% protein across 10,200 litres,” explains Zara Dorrington, who runs the family’s livestock with head herdsman Matt Keyworth. “TMR is the best way for us to manage intake, and it’s not just for the cows – when housed, all our stock are fed this way, including the youngsters.”

The farm relies heavily on producing milk from home-grown forage which requires around 1,700 tonnes of grass and 3,500 tonnes of maize each year, supplemented by whole crop. Being located in Dunsby, Lincolnshire, where dairy farms are few and far between, the 800ha mixed farm runs its own forager for grass, to stay in control of dry matter and energy. The only exception is maize and whole crop, which does rely on contractor services.

“The nearest grass silage contractor is over 90 minutes away, so we run our own equipment to make the most of timings with grass,” adds Zara. “With a multi-cut system, we can focus on producing the highest quality grass silage by taking more frequent, lighter cuts when our leys are at their best.”

When it comes to feeding, the Dorringtons have successfully used a Siloking Classic, Premium 14 model for a number of years. Supplied by Irelands Farm Machinery, the single auger mixer had performed well, but with expansion plans on the horizon, the farm found itself managing a progressive shift of numbers within its cow groups.

“We were having to make an extra two mixes per day to accommodate the growing herd size and its groups, which simply became a time-consuming task,” says Zara. “Group numbers increased from 90 to 130 head, which meant that our single auger feeder wasn’t really big enough to remain efficient.”

Two years ago, JH Dorrington swapped its Classic Premium 14 for a twin auger Classic Duo 22, and haven’t looked back.

“We had been pleased with the mixing performance and reliability of the Siloking, so it was an easy decision to choose another, but with more capacity,” says Zara. “With raised feed passages, we opted for a front cross conveyor and tub magnets. We’ve no requirement for rear doors.”

With no in-parlour feeding at White House Farm, rations have to be delivered with a high degree of accuracy and consistency. And Siloking Wireless data transfer provides the level of management required between farm office and control box.

“The control boxes are mounted in the feeder tractor and the telehandler,” explains Matt Keyworth. “And it’s a very accurate system. The only difference with the Duo 22 is that our previous Siloking gave an audible warning when you were within 10% of the required ingredient weight, and again at zero. It meant you didn’t have to keep a constant eye on the screen to precisely hit your target.”

“That said, feeding is still much quicker, and easier,” says Matt. “Having that bit more capacity means we can easily prepare 35 tonnes/day in just four mixes. And even when the herd is grazing through the summer months, there are still daily rations to produce. Feeding is now far more efficient, and much quicker.”