International Gate Devices Catalog

IG D

INTERNATIONAL GATE DEVICES, INC.

/GD PRESENTS THE ™

�@§ Li!X]/jj@!K@�

@fj'fi§ rmJi1

DDD

Designed for easy trouble-free operation and safety!

Completely enclosed . . .

Not affected by weather.

Manufactured with quality control and sturdy construction for long life. /GD �!J@b} ™ ffl&x§ik@� tJ@ �W (I§)�� Guaranteed to save you money . . . and cut shipping costs!

INTERNATIONAL GATE DEVICES, INC. • I

'l�

™

@!Ir�� �� adds an aesthetically pleasing design to any ornamental sliding track gate. With this proven designer track system, integrated into the bottom rail of any ornamental sliding frame, the gate seems to float in the air as it glides open and closed on the discreetly l�cated truck assemblies beneath the track and gate frame.

Suggested for gate openings up to 20 feet.

-14"-

100 TRUCK

4"8UAIEDPOS 2,REQUIREO

..

ROUlR SUPPORT BRACKETS BY OTHERS

3"HEAV'I WAUGUIOE POSTS

INTERNATIONAL GATE DEVICES, INC.

IE/Z Slide

TM

Nylon Cantilever Roller

I

Maintenance Free, High Strength, Graphite Impregnated, Compression Molded Nylon

Safety Cover

: ·-·-:::::: :::::::::::::::::::::: ::::::::::::::::::::::::----� : -----J

r-f-1 '

i j i

0�

i

j

Heavy Duty Polymer 7" Diameter Roller

Galvanized Chassis 4" or 6 5/8"

Double 5ealed

Bearings

Never Needs

Greasing

Adjustable 1" steel

shaft

/3

Available for Round or Square Posts

• EIZ SLIDE

™

EXPOSED ROLLER CANTILEVER GATE SYSTEM SPECIFICATIONS

External Roller Assembly shall consist of a minimum 7.0" diameter, 3.50" wide MC Nylon compression molded wheel which shall rotate upon bearings that shall rotate upon a 1.00" hardened steel main shaft and enclosed by an integral polyurethane cover for safety.

A graphite-impregnated MC Nylon wheel shall be employed to reduce the effective drag co-efficient, and to prevent wearing off the galvanizing of a galvanized steel pipe-frame gate.

Bearings shall be rubber-sealed and permanently lubricated, and shall have a dynamic load rating of 15,000 pounds per bearing. The 1.00" hardened steel main shaft shall have means of adjusting the Nylon roller laterally for proper gate alignment.

The Mounting Hardware supplied shall be appropriate for mounting the Cantilever Gate Roller System to 4" or 6", round or square posts.

Gate Opening Size shall not exceed 30 feet, with an overall length not to exceed 45 feet.

INTERNATIONAL GATE DEVICES, INC. 101 Sycamore Avenue• Folsom, Pennsylvania 19033 • Tel: (610) 461-0811 • Fax: (610) 534-9682 800-557-GATE(4283) • https::www.SLIDEGATE.net • E-Mail: EZSLIDE101@aol.com

INTERNATIONAL GATE DEVICES, INC.

v I 8S I

You can now weld your own aluminum frame gates.

Lead times and shipping headaches are a thing of the past.

■

e

@

Your 2" square upright members are welded to the track and rail combo top member creating evenly spaced bays never more than 8' wide. (For the strongest gate the bays should not be wider than the height of the gate).

With our E/Z Slide ™ Track and Rail combo you can construct your own aluminum enclosed track gate system. Our one piece track and rail combo (alloy 66061-T6) becomes an integral part of your cantilever gate frame. r"""::::=-==rtY'

@

T he bottom member of the gate frame (either 2x2 or 2x4 depending upon length of gate) is welded to the upright members creating a lightweight but. rigid frame;

@

Bracing should be accomplished by using welded corner braces (detail D). Aircraft cable or s. s. truss rods may be used. It is recommended that you not bolt through the top or bottom frame members as these holes will gradually wallow open and ultimately weaken the structure.

DETP,,IL D

"-�"

�

�

;

1�::.

"; #101 Bolt-on "

#102 Bolt-on

#103 Overhead Track

#104 Track & Rail Combo

Bolt-on Track for 2 1/2" round frame

Bolt-on Track for 2" square frame

For overhead slide gates.

Weld-your own 2" Alum. frame gate.

fc

�

•

�

Always refer to UL325 when designing, building and installing gates using the IGD E/2™ Slide Track System.

INTERNATIONAL GATE DEVICES, INC. 101 Sycamore Avenue• Folsom, Pennsylvania 19033 • Tel: (610) 461-0811 • Fax: (610) 534-9682 800-557-GATE(4283) • https:www.SLIDEGATE.net • E-Mail: EZSLIDE101@aol.com