Red Rack Storage and Accessories

RRWM-5/20: 5 Compartment System Open loop coat hanger 338-DKH-O $1,200.00$15.00 RRWM-6/20: 6 Compartment System Closed loop coat hanger 338-DKH-C $1,400.00$15.00 RRWM-7/20: 7 Compartment SystemFlat coat and pant hanger 338-FDH $1,600.00$15.00 RRWM-8/20: 8 Compartment SystemGlove or hood hanger 338-GDH $1,850.00$15.00 RRWM-9/20: 9 Compartment SystemHelmet Holder 338-HH $2,050.00$15.00 RRWM-10/20: 10 Compartment System Utility Hooks 338-BPH $2,300.00$7.00

• UniMac equipment meets the cleaning requirements of NFPA 1851 standards • Faster extraction technology spins up to a maximum of 100 G-Force • Advanced Inverter Drive • M9 Control – Six cycles that can be modified to meet your laundry’s unique demands. Three water levels and up to five supply signals for automated dispensing of laundry chemicals • Load Capacity - 30 lbs or 40 lbs • Width/Depth/Height : 29” x 34 9/16” x 45” • Voltage/Hz # of Wires/Phase/Circuit Breaker - FLA: 380-415/50/60/3/3 15-4 • Net Weight: 460 lbs

RED RACK GEAR STORAGE • Dimensions: Length determined by # of units x 20” deep x 72” tall • Red Rack components are coated with durable red powder coat finish • Adjustable boot & helmet shelves, apparel hooks and name plate 60 360 4th St. P.O. Box 68 Clear Lake, WI 54005 www.industrialsafetystore.com

2 Compartment System 338-RRWM-2/20 $650.00 3 25 25 3 Compartment System 338-RRWM-3/20 $890.00 4 Compartment System 338-RRWM-4/20 $1160.00 5 Compartment System 338-RRWM-5/20 $1385.00 finish 6 Compartment System 338-RRWM-6/20 $1600.00 $550.00 7 Compartment System 338-RRWM-7/20 $1840.00 $750.00 8 Compartment System 338-RRWM-8/20 $2100.00 $1,000.00 9 Compartment System 338-RRWM-9/20 $2340.00

• Can wash 1-2 sets of turnout gear per load. Full wash cycle: 25-35 minutes • Runs on 120 volts (watts per load: 110-160 watt hours) • Stainless steel inner and outer tubs (capacity: 2 cu. Ft) and has a patented tub design • Easy soft-mount installation • No transmission or agitator to replace and no lower water seals • With fewer overall moving parts; Promotes longer life expectancy • Complete with manual /manufacturer’s warranty & Follows NFPA-1851 guidelines

• This wash solution has been carefully developed to ensure the safe cleaning of all firefighting turnout gear and other PPE. Meets the recommendations set forth by NFPA 1851, 2008 edition • Non-corrosive to metals and will not leave a residue • Highly Concentrated formula with a pH below 9.5 • Can be used in all cleaning applications

Storage Racks | PPE GW401: [4] One Gallon GW105: 5 Gallon Pail $111.50 $126.50

Dimensions: Single Sided 64” wide x 20” deep x 79” tall, Double Sided 64” wide x 40” deep x 79” tall

Single sided with three openings, double sided with three openings each side

Units are supplied with four swivel casters

Includes two foot operated brakes

Adjustable boot and helmet shelves, apparel hooks and label holder 3/20 Single Sided Mobile RackRMSS-3/20: Single Sided Mobile Rack 338-RMSS-3/20$950.00 $1080.00 3/24 Single Sided Mobile RackRMSS-3/24: Single Sided Mobile Rack 338-RMSS-3/24$975.00 $1110.00 6/20 Double Sided Mobile RackRMDS-6/20: Double Sided Mobile Rack 338-RMDS-6/20$1475.00 $1720.00 6/24 Double Sided Mobile RackRMDS-6/24: Double Sided Mobile Rack 338-RMDS-6/24$1550.00 $1805.00

• Created for on-scene decon • Helpsminimizecontact contaminants • 3-year shelf life • Individually packaged to eliminate cross-contamination • Textured on one side and smooth on the other • Sold per pack, 12 wipes per pack

DKH-C: Closed loop coat hanger $9.95 • Supports up to 20 lbs FDH: Flat coat and pant hanger $9.95 • • One piece I-Beam construction Sturdy non-corroding hanger GDH: Glove or hood hanger $9.95 • Size: 1.2” x 16.6” x 9” HH: Helmet Holder $9.95 • Available in black or yellow

SINGLE AND DOUBLE SIDED MOBILE RED RACK GEAR STORAGE • Dimensions: Single sided 64” length x 20” deep x 81” high. Double sided 64” length x 40” deep x 81” high • Each unit comes complete with; Adjustable boot shelf, Adjustable helmet shelf, hanging pole- length of the unit, 2 Apparel hooks per locker unit, Name plate per locker unit, heavy-duty legs for elevation.

• Heat or no heat • 3 hour timer • One push button disassembly • Dry time: 1-2 hours