Intensiv catalogue 2018

Catalogue 2018

Intensiv Specialties and Innovations

Intensiv Swingle

Intensiv Proxoshape Coarse

Intensiv ApproxOpener

Pages 58 and 70

Page 60

Pages 50 and 74

Intensiv Ortho-Strips System

Intensiv IPR-DistanceControl

Page 72

Page 74

Intensiv ProxoshapeTray

N ew

Page 40

IPR Set

New

Intensiv Guided Universal Prep Set N ew

Page 76

Page 46

Intensiv Cutting Instruments

Intensiv PrepTwins

Page 41

Page 42

Page 54

Intensiv ProxoStrip

Intensiv ProxoStrip Plus

Intensiv ProxoStrip Anterior

Intensiv Ortho-StripsTray N ew

N ew

Page 62

Page 63

Page 63

Intensiv ProxoContour

Intensiv ProxoContour Coarse

Intensiv ProxoPolish

Page 64

Page 65

Page 65

Intensiv UniglossCellbrush

Intensiv UniglossPaste

Intensiv UniglossPolisher

Page 68

Page 68

Page 68

Intensiv HygienicTray HT100

Intensiv HygienicTray HT300

Intensiv HygienicTray HT3000

Page 39

Page 39

Page 39

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

Constant Superior Quality, Innovation in line with science and clinical practice In recent years, Intensiv has worked with dedication in order to further develop diamond instruments of consistent superior quality for the benefit of its customers.

Thanks to constant contact with dental experts and leading university clinics, cutting edge solutions can be discovered for the clinical challenges of practicing dentists.

This was made possible thanks to Intensiv’s unique industrial processes, which include, among other things, a 100% end-inspection of all its products.

The use of a structured instrument guide is a new concept presented for the application of Intensiv instruments in the clinical fields of orthodontics (Intensiv IPR Set) and prosthetics ( Intensiv Guided Universal Prep Set).

As a result of the above, Intensiv has become a benchmark for outstanding g performance in terms of qualityy and functio i nallity, both h for prreparation instruments, as well as for fini inishi h ng and polishin hiing insstruments.

We would like to thank you for choosing Intensiv instruments, of which we are proud.

We are pleased to count you among our clients, and we present you with this 2018 Catalogue.

We hope that you enjoy reading the catalogue and wish for your desired success when choosing your Intensiv instruments.

GĂźnter Smailus CEEO Intensiv SA

Intensiv SA | CH-6926 Montagnola | Tel. T +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

1

Recommendations for Intensiv Diamond Instruments Product description Stainless steel with diamond coated working parts Diamond grit-sizes: 8μm – 150μm Shapes: ball, inverted cone, pear, cylinder, flame, tapered, pointed, torpedo, football, wheel, lenticular, special shapes Available as Friction Grip (FG) or Right Angle (RA) Compatible with turbines, contra-angles Sterilizable and reusable Indications Preparations for restorations and prosthetics in dentistry Periodontic treatments Orthodontics Instructions for use Insert the instrument as deeply as possible into the chuck (FG) or until safety “click” is heard (RA) (figure a).

Set the handpiece at the required working speed (table 1) before applying the instrument to the treated area.

Activate water spray for the duration of the treatment (minimum 50 mL/min).

Ensure that there is consistent water flow.

Provide additional waterspray cooling for instruments exceeding (DE=ISO 020) ISO 027.

Work applying the suggested operating force (table 1).

It is recommended to use a dental dam.

Use the instruments over the entire length of their working head and not just at the tip, so as to avoid an unnecessary increase of the contact pressure causing local overheating (figure b).

Once the preparation has been completed, remove the instrument from the site and allow it to come to a standstill.

It is recommended to wear gloves and safety glasses.

Maintenance and sterilization Clean the instruments and remove debris after each use, so as to maintain their abrasive properties.

Instruments are delivered non-sterile. They must be disinfected and sterilized prior to first use on the patient and disinfected, cleaned with bristle brush or sonic bath and sterilized immediately after each use.

Disinfect the diamond instruments separately from non-stainless steel instruments, such as polishers and abrasives.

Use only cleaning/disinfection solutions that provide corrosion protection, and strictly observe the concentrations and reaction times recommended by the manufacturer.

In case of heavily contaminated instruments it is advisable to use an ultrasonic bath.

2

a

b

After disinfection, inspect the instruments for residual contamination.

If necessary, repeat the disinfection/cleaning procedure.

Clean clogged diamond surfaces using the special Intensiv Cleaning Rubber Diakleen or a suitable brush. Thoroughly rinse the instruments with water and dry them immediately.

Check for possible damages; dispose of oxidized, blunt and deformed instruments.

Sterilization must be carried out according to validated procedures.

Use a single-pulsed or fractionated vacuum autoclave and subvacuum drying.

Chemiclave sterilizers may also be used. Hot air sterilizers are not suitable for diamond instruments.

Cleaning, disinfection and sterilization can be also carried out using professional washer disinfectors and sterilizers.

Concerning the sterilization process we refer to the ISO standard 17664.

We suggest to follow the indications below: Cycles at 134°C Tmin = 134°C – Tmax = 138°C Pressure = 3.15 bar abs Time = 4 min (raisable) Cycles at 121°C Tmin = 121°C – Tmax = 125°C Pressure = 2.10 bar abs Time = 16 min (raisable) Risk warnings Avoid jamming or levering actions when rotating, as this increases the risk of instrument breakage.

Never exceed the specified maximum speed, so as to avoid instrument breakage caused by the generation of powerful centrifugal forces. This occurs in particular when the diameter of the working head exceeds that of the shaft (figure 1c).

Avoid temperatures above 180°C which may affect the durability of the instrument.

Avoid applying forces greater than the recommended values, as this could cause damage to the instrument and the treated area.

To ensure traceability of the instruments during their entire application, it is recommended to keep the packaging.

Pay special attention to the instruments with a diameter of less than ISO 016 and never exceed the specified maximum load because of risk of breakage.

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

c

Recommendations for Intensiv Cutting Instruments Product description Tungsten carbide and stainless steel Sizes: ISO 006-023 Shapes: ball, inverted cone, pear, cylinder, cone, torpedo, football, special shape Typologies: ExcavatingCutter, CrownCutter, AmalgamCutter, CavityCutter and DebondingCutter Available as Friction Grip (FG) or Right Angle (RA) Compatible with turbines, contra-angles Sterilizable and reusable Indications Intensiv ExcavatingCutter: dentin excavation Shapes: 801, 805, 830, 830R, 830RL Intensiv CrownCutter: crown cutting Shape: 838 (Ref. CU41310 and CU41312) Intensiv AmalgamCutter: amalgam removal Shapes: 845, 838 (special form) Intensiv CavityCutter: cavity preparation Shapes: 835, 845, 838 Intensiv DebondingCutter: composite removal in orthodontics Shapes: 379, 878K The full performance of Intensiv Cutting Instruments depends on compliance with the following instructions for use and maintenance indications.

Instructions for use Intensiv Cutting Instruments are to be selected (shape, size, type) according to the type of preparation to be carried out.

Insert the instrument as deeply as possible into the chuck (FG) or until safety “click” is heard (RA).

Set the handpiece at the required working speed (table 2) before applying the instrument to the area to be treated.

Activate water spray for the duration of the treatment (minimum 50 mL/min).

FG instruments with a total length exceeding 22mm or a head diameter of more than 2mm require additional cooling (> 50 mL/min).

Regulate water flow in case of water excess or shortage.

Work applying the suggested operating force (table 2).

It is recommended to use a dental dam.

Once the preparation has been completed, remove the instrument from the site and allow it to come to a full stop.

It is advisable to wear safety glasses, and gloves, depending on the application.

Dispose of damaged or deformed instruments.

Maintenance and sterilization Instruments are delivered non-sterile. They must be disinfected and sterilized prior to first use on the patient and disinfected, cleaned with bristle brush or sonic bath and sterilized immediately after each use.

Protect instruments against dust, moisture and recontamination during storage. If they are not used right away, it is advisable to keep them in their original packaging.

Use only cleaning/disinfection solutions that provide corrosion protection, and strictly observe the concentrations and reaction times recommended by the manufacturer.

Avoid contact with H2O3 (hydrogen peroxide). It attacks and damages tungsten carbide, decreasing product lifespan.

In case of heavily contaminated instruments it is advisable to use an ultrasonic bath.

After disinfection, inspect the instruments for residual contamination.

If necessary, repeat the disinfection/cleaning procedure.

Check for possible damage; dispose of oxydized, blunt and deformed instruments.

Sterilization must be carried out according to validated procedures.

Use a single-pulsed or fractionated vacuum autoclave and subvacuum drying.

Chemiclave sterilizers may also be used.

Intensiv Cutting Instruments may corrode in a thermal disinfection unit.

This may cause discolouration and decrease product lifespan.

Concerning the sterilization process we refer to the ISO standard 17664.

We suggest to follow the indications below: Cycles at 134°C Tmin = 134°C – Tmax = 138°C Pressure = 3.15 bar abs Time = 4 min (raisable) Cycles at 121°C Tmin = 121°C – Tmax = 125°C Pressure = 2.10 bar abs Time = 16 min (raisable) Risk warnings Instrument may break at conjunction between working part and shank.

To reduce risk follow instructions for use and maintenance indications.

Avoid jamming or levering actions when rotating, as this increases the risk of instrument breakage Never exceed the specified maximum speed (table 2), so as to avoid instrument breakage caused by the generation of powerful centrifugal forces.

This occurs in particular when the diameter of the working head exceeds that of the shaft.

Avoid temperatures above 180°C which may affect the durability of the instrument.

Avoid applying forces greater than the recommended values, as this could cause heat build up and damage to the instrument and the treated area.

Inadequate cooling with water may injure the tooth and contiguous tissue irreversibly and may adversely affect the final result.

Instruments with fractured blades induce the user to use more pressure, which increases the working temperature. This may cause injury to the pulp.

Fractured and incorrectly shaped blades cause vibration.

To ensure traceability of the instruments during their entire application, it is recommended to keep the packaging.

Pay special attention to the instruments with a diameter of less than ISO 016 and never exceed the specified maximum load because of risk of breakage.

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

3

ISO Shank Codes, ISO Number Codes and Intensiv Color Codes of the grit sizes ø L mm = 5

313

314

315

204

FG Miniature FG FG Long Right-angle

(FGM) (FG) (FGL) (RA)

ISO ISO ISO ISO

313 314 315 204

314 257 524 023

Example: 314 Shank type and length 257 Shape of the head 524 Grit size 023 Diameter of the working part L mm Length of the working part

* Depending on the shape and size of the instruments, the grit size may differ from the specified value.

Symbols of indications and Intensiv Number Code and ISO Code Cavity preparation

Crown separation

Amalgam removal

Crown preparation

Root planing

Prophylaxis

Finishing of the filling

Orthodontics

The tables are divided into shape groups.

The relation between Intensiv and ISO code is easy to establish.

Example: ISO code 314 257 524 023 corresponds to the Intensiv code 8255.

Intensiv code in red = also in RA

4

8255

= FG 8255/6

L255

= FGL 255/6

5255

= FG 5255/6 or = RA 5255/6

Football conical bud

Package units: packages of 6 instruments = .../6 Examples: Intensiv reference code

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

Index

02 03 04 06 08 09 11 12 19 21 28 30 32 35 36 38 39 40 42 44 46 48 50 50 52 53 54

-

07 09 10 12 18 20 28 29 31 35 36 37

- 41 - 43 - 45 -

47 49 51 51

- 55

56 - 57 56 - 57 58 - 59 60 61 62 62 64 66 68

-

65 63 65 67 69

70 72 72 74 76

-

71 73 73 75 77

78 - 79 78 - 79 78 - 79 80 81 82 - 83 84 - 90

Recommendations Intensiv Diamond Instruments Recommendations Intensiv Cutting Instruments odes, symbols, grit sizes Shape chart Intensiv Diamond Instruments - Ball - Inverted cone - Pear - Cylinder - Flame - Tapered - Pointed - Torpedo - Football - Wheel / Lenticular - Special shapes - Intensiv Diamond Instruments FG Miniature Intensiv HygienicTray HT100, HT300, HT3000 Intensiv ProxoshapeTray and Intensiv OrthoStripsTray Intensiv Cutting Instruments Classic Intensiv Preparation and Finishing Sets Prosthetic dentistry Intensiv Guided Universal Prep Set Intensiv Sets Direct and Indirect A & P Intensiv Advanced Prep Set & Finishing Set for Cerec Restorations Intensiv ApproxOpener Intensiv Universal full Crown and Porcelain Veneer Prep Set Intensiv Modular Veneer Set and Intensiv Geneva Prep Set Intensiv PrepTwins Conservative dentistry Intensiv Cerinlay Set Intensiv Minimal Invasiv Prep Set Intensiv Swingle Intensiv Proxoshape Intensiv Bevelshape Finishing and Polishing Intensiv Metal Diamond Strips - Intensiv ProxoStrip, Intensiv ProxoStrip Plus, Intensiv ProxoStrip Anterior - Intensiv ProxoContour, Intensiv ProxoContour Coarse, Intensiv ProxoPolish Intensiv Composhape Set 1, Intensiv Composhape Set A & P Intensiv UniglossCellbrush, Intensiv UniglossPaste, Intensiv UniglossPolisher Orthodontics Intensiv Swingle Intensiv Ortho-Strips System, Double-Sided Intensiv Ortho-Strips System, One-Sided Intensiv ApproxOpener, Intensiv IPR-DistanceControl Intensiv IPR Set Parodontology Intensiv Perio Set Intensiv Rootshape Intensiv PerioDiaCurette Intensiv DiaTweezer Intensiv Accessories Intensiv Mandrel, Intensiv Diakleen, Intensiv Unigrip Intensiv Laboratory Program Intensiv and ISO Code Index Intensiv Diamond Instruments (as long as stocks last)

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

5

846

6

848

848L

845

847 860 861

845KR 846KR 847KR 848KR 862

849

855 888

856L 882

856 886

886Z

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

850

Tapered, round, extra long

881

Tapered, round, long

880 Cylinder, pointed

Cylinder, pointed

830

Tapered

822

Cylinder, round, extra long

Cylinder, round, long

Cylinder, round

Cylinder, rounded edge

830R

Tapered, round, normal

Conical

838

Tapered, round, long

863

Tapered, round, normal

Cylindrical, long

837KR 836KR

Tapered, round, short

Cylinder, extra-long, rounded edge

Cylinder, medium, rounded edge

806

Cylindrical, normal

842

Cylindrical, normal

805

Tapered, rounded edge, long

877 Cylindrical, short

837L

Tapered, rounded edge, normal

813

Cylinder, extra-long

Cylinder, extra-long, parallel shoulder

Cylinder, long, parallel shoulder

807

Tapered, rounded edge

876 837

Flame Pages 19-20

836

Torpedo

Cylinder, short, parallel shoulder

Cylinder, short

Cylinder, short, rounded edge

Cylinder, end-coated only

Cylinder Pages 12-17

802

Tapered, rounded edge

879L Torpedo

835

Tapered

879 Torpedo, extra long

835KR

Tapered, short

878 801L

Tapered, extra-long

839

Torpedo, long

Torpedo, short

Cylinder Pages 17-18

801

Tapered, long

Tapered, medium

Tapered Pages 21-27

Pear, long, round

Pear, long, convex tip

Pear, convex tip

Pear, small, convex tip

Pear

Pear Pages 11-12

Inverted cone with neck

Inverted cone

Diabolo

Inverted cone, long

Inverted cone Pages 09-10

Round, coated neck

Round, long neck

Round

Ball Pages 08-09

Shape chart Intensiv Diamond Instruments 2018

830L 830RL

885

850L

833

392

874

889 899

842 811

848 Double cone, long

Palatal grinder, short

858

835 859

818

Depth marker

825 852

Depth marker

Lenticular

956

Depth marker

909 Palatal grinder, slim

955

Conical, spiral groove

390

Cylindrical, spiral groove

Grenade

Egg

Football

Conical bud

Football Pages 32-35

857

Lenticular

379

Flame, long neck

818 Wheel, wide

369

Torpedo, short

815 Wheel

Wheel

Wheel / Lenticular Pages 35-36

368

Interdental

Cavity margin trimmer

Special shapes Pages 36-37

851 859L 878K 877K

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

879K 898

811L

825

834

7

Conical torpedo

Conical torpedo

Conical torpedo

Conical torpedo

Torpedo Pages 30-31

Pointed cone, round

Pointed cone

Pointed cone

Pointed cone

Pointed cone

Pointed, round

Pointed Pages 28-29

Tapered, round, safe end

Tapered, round, safe end

Tapered Pages 27-28

Ball Round

Ball Round

Ball

8

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

Ball Round, coated neck

Ball Round, long neck

See pages 54-55

Inverted cone long

Inverted cone

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

9

Inverted cone Diabolo Inverted cone Inverted cone Inverted cone with collar

10

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

Pear convex tip

Pear small, convex tip

Pear round

Pear

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

11

Pear long, convex tip Pear long, round Cylinder end-coated only

Cylinder short, rounded edge

Cylinder

12

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

Cylinder short Cylinder short Cylinder short, parallel shoulder

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

13

14

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

Cylinder extra-long, rounded edge

Cylinder extra-long

Cylinder extra-long, parallel shoulder

Cylinder long, parallel shoulder

Cylinder short, rounded edge

Cylinder medium, rounded edge Cylinder medium, rounded edge Cylinder round

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

15

Cylinder round, long

Cylinder round, long

Cylinder round, long Cylinder round, extra long

16

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

Cylinder Torpedo

Cylinder pointed

Cylinder pointed

See pages 54-55

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

17

Cylinder Torpedo

Cylinder Torpedo, long Cylinder Torpedo, extra long Cylinder Torpedo, short

18

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

Flame cylindrical, normal

Flame cylindrical, short

Flame

See pages 54-55

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

19

Flame cylindrical, normal Flame cylindrical, long Flame conical

20

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

Tapered extra-long

Tapered long

Tapered medium

Tapered

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

21

Tapered short Tapered short Tapered

22

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

Tapered Tapered rounded edge Tapered rounded edge

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

23

Tapered rounded edge, normal Tapered round, sort

Tapered rounded edge, long

See pages 54-55

24

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

Tapered round, normal Tapered round, normal Tapered round, long

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

25

Tapered round, normal

Tapered

Tapered round, normal Tapered round, long

26

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

Tapered round, long Tapered round, extra long Tapered round, safe end

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

27

Tapered round, safe end Pointed cone

Pointed round

Pointed cone

Pointed

28

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

Pointed cone

Pointed cone, round

Pointed cone Pointed cone

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

29

Torpedo conical

Torpedo conical

Torpedo conical

Torpedo

30

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

Torpedo conical

Torpedo conical

See pages 54-55

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

31

Football conical bud

Football

Football conical bud

See pages 54-55

32

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

Football Football egg Football egg

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

33

Football egg Football grenade Football palatal grinder, slim

34

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

Football palatal grinder, short Football double cone, long

Wheel

Wheel

Wheel / Lenticular

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

35

Wheel wide

Lenticular

Lenticular

Special shapes interdental

Special shapes cavity margin trimmer

Special shapes

36

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

37

Special shapes depth marker

Special shapes depth marker

Special shapes depth marker

Special shapes conical, spiral groove

Special shapes cylindrical, spiral groove

Special shapes ame, long neck

Special shapes Torpedo, short

Intensiv Diamond Instruments FG Miniature

* as long as stocks last

38

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

Intensiv HygienicTray Developed by Dr. Gigandet and Dr. Engel, University of Bern, Switzerland

Resistant high quality stainless steel instrument tray for the arrangement of all rotating instruments for routine treatment protocols Instrument trays for the permanent availability of all rotating instruments for routine treatment protocols have become an indispensable support in dental clinics.

The Intensiv HygienicTray offers the appropriate solution.

Dental clinic processes have become standardized by the availability of the complete set of commonly used rotating instruments.

Product description To disassemble into different parts made of high quality stainless steel.

Without hard to reach fissures and hollows.

Rounded edges.

Height: suitable for standard sterilization trays.

Intensiv HygienicTray HT100

Intensiv HygienicTray HT300

Intensiv HygienicTray HT3000

Ref. HT100*

Ref. HT300*

Ref. HT3000*

3 separable parts: foldable cover; instrument tray; bottom 13 FG and 5 RA instrument holders Ergonomic instrument access due to high and inclined tray position

2 separable parts: foldable cover; instrument tray 13 FG and 5 RA instrument holders Ergonomic instrument access due to low and inclined tray position

2 separable parts 36 FG and 18 RA instrument holders Easy instrument removal due to irregular arranged position of instruments

Indications Organization of standard instruments for all routine treatment protocols Instrument holder during the sterilization process Storage of rotary instruments

Benefits Organization and availability of commonly used rotating instruments Easy instrument removal due to irregular arranged position of instruments Easily disassembled into single parts, free from fissures and hollows, completely hygienic Durable resistant and unlimited sterilizable stainless steel

* delivered without rotating instruments

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

39

Intensiv ProxoshapeTray

New

Compact stainless steel tray with colored silicone holders for the support of oscillating files Intensiv Proxoshape During treatments that involve the use of Intensiv oscillating files, it is important to benefit from a support which is safe, hygienic, sterilizable and customizable in the content.

The identification of the file to be used has to be clear and immediate.

The storage of the files after sterilization must be carried out in complete safety.

Product description Tray in stainless steel, consisting in a base and lid.

The Tray has an internal folding support with nine holes suitable to support sterilisable colored silicone holders.

Dimensions: 87x51x14 mm (LxWxH).

The Tray has slots for the disinfection liquid to flow through it.

The Tray is designed to hold, through its silicone holders, nine Intensiv oscillating files, such as:

Intensiv Proxoshape, Intensiv Bevelshape, Intensiv Rootshape.

1

Indications Arrangement of Intensiv oscillating files during interproximal preparation, excess removal, finishing and polishing procedures Support of Intensiv oscillating files during disinfection and sterilisation processes Storage of Intensiv oscillating files Benefits Intensiv files available during the treatment Colored silicone supports for individual combination of the needed files Compact and light Suitable for disinfection and sterilization Storage in complete safety of Intensiv files

2

3

1) Intensiv ProxoshapeTray closed 2) Easy identification of Intensiv file 3) Secure file take out

All colored silicone holders are available in packaging of 10 pieces or in assortment of 8 pieces.

Ref. PST500 (delivered without files)

8 silicone holders are delivered free with the Tray.

The desired silicone holders are to be ordered with the Tray.

Available colored silicon holders

40

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

Intensiv Ortho-StripsTray

New

Compact stainless steel tray with colored silicone holders for the support of Intensiv Ortho-Strips during interproximal reduction (IPR) in Orthodontics During treatments that involve the use of Intensiv Ortho-Strips, it is important to benefit from a support which is safe, hygienic, sterilizable and customizable.

The identification of the file to be used has to be clear and immediate.

The storage of the files after sterilization must be carried out in complete safety.

Product description Tray in stainless steel, consisting of a base and lid.

The Tray has an internal folding support with six holes suitable to support sterilisable colored silicone holders.

Dimensions: 87x51x14 mm (LxWxH).

The Tray has slots for the disinfection liquid to flow through it.

The Tray is designed to hold, through its silicone holders, six Intensiv Ortho-Strips, for mechanical Orthodontic stripping.

Indications Arrangement of Intensiv Ortho-Strips during Orthodontic stripping procedures Support of Intensiv Orthos-Strips during disinfection and sterilisation processes Storage of Intensiv Ortho-Strips Benefits Intensiv Ortho-Strips available during the treatment Colored silicone supports for individual combination of the needed strips Compact and light Suitable for disinfection and sterilization Storage in complete safety of Intensiv Ortho-Strips

1

2

1) Introduction of the colored silicone supports in the Tray for the positioning of the Intensiv Ortho-Strips 2) Selection of Intensiv Ortho-Strips according to the IPR procedure

All colored silicone holders are available in packaging of 10 pieces or in assortment of 8 pieces.

Ref. OST400 (delivered without strips)

8 silicone holders are delivered free with the Tray.

The desired silicone holders are to be ordered with the Tray.

Available colored silicon holders

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

41

Intensiv Cutting Instruments Swiss Premium Quality

In restorative therapies the complete excavation of decayed dentine is a mandatory step. The use of precise and efficient rotating cutting instruments allows for tactile perception of healthy dental tissue.

For the removal of crowns, instruments which allow minimum separation procedure time without causing vibration are necessary.

For the removal of amalgam it is preferable to use instruments that allow for chopping of debris, avoiding pulverization.

In Orthodontics, all residues of composite resins used for bracket bonding must be completely removed, and the tooth surfaces polished to achieve their natural roughness.

Indications Excavation of decayed dentine Removal of orthodontic composite (Debonding) Cutting of crowns and bridges made of metal, metal-ceramic Amalgam removal Benefits Swiss Premium Quality Excellent cutting performance High resistance to instrument breakage Low vibration of instrument

ExcavatingCutter

ExcavatingCutter

ExcavatingCutter

ExcavatingCutter

ExcavatingCutter

ExcavatingCutter

42

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

Clinical pictures: Prof. Antonio Cerutti, Brescia, Italy and Dr. A. Devigus, BĂźlach, Switzerland

ExcavatingCutter

CavityCutter

CavityCutter

CavityCutter

CavityCutter

CrownCutter

CavityCutter

AmalgamCutter

AmalgamCutter

DebondingCutter

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

DebondingCutter

43

Classic Intensiv Preparation and Finishing Sets

Ref. 044B: B1, B2, B3, B4, B5, B6, B7, B8, B9, B10, B11, B12 Intensiv Berner Uni Prep Set University of Bern, Switzerland

Intensiv Combi Prep Set: Direct Restoration University of Zurich, Switzerland

Diamond instruments for the preparation of restorations (cast fillings) and crowns

Diamond instruments for direct tooth-coloured adhesive restorations

Ref. 106: CS140, CS125, CS040, CS025 Ref. 106S: CSS040, CSS025

Ref. 134: 8614, 3614B, 8714, 3714B, 8712, 3712B, 8710, 3710B, 80D4, 8259, 3259, 3113R, 3113NR, 3116, 8040, 3040B, 8040S, 3040SB

Intensiv Cavishape Set, Intensiv Cavishape Set S University of Bern, Switzerland

Intensiv Combi Prep Set: Indirect Restoration University of Zurich, Switzerland

Oscillating diamond files for finishing preparation margins

Diamond instruments for indirect tooth-coloured adhesive restorations

Ref. 022: 414, 3414, 3116, 9274, 3526, 4310, 4323, 9223

Ref. 033: 8113R, 8113NR, 8117, 3113R, 3113NR, 3117

Intensiv Cerec Set Prof. W. H. Mรถrmann, University of Zurich, Switzerland

Intensiv Inlay Set University of Zurich, Switzerland

Diamond instruments for Cerec restorations

Diamond instruments for classic inlay preparations

Ref. 135: 9401, 4205, 9205, 4274, PS2S*, PS9S*, RS40*, RS9*, 9040, 8255, 9274 (* Proxoshape and Rootshape, see pages 60/78)

44

Ref. 133: 8714, 3714B, 8710, 3710B, 8212S, 8200, 8200S, 4205, 9205, 4205L, PS2*, 4400 (* Proxoshape, see page 60)

Ref. 009: 218B, 219B, 223B, 3218, 3219, 3223

Intensiv Combi Prep Set: Contouring and Finishing Set University of Zurich, Switzerland

Intensiv Piccolo Set University of Bern, Switzerland

Diamond instruments for finishing of esthetic restorations

Diamond instruments for small cavity preparations with perfect margins

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

Ref. 122: 8310, 4310B, 8406A, 4406B, 8305LP, 4325L, 8414, 4414B, 80D3, 4305L, 8200S, 4255, 5315L

Ref. 111: 30, 31, 32, 33, 34, 4035, 4036, 4037, 4038, 4039

Intensiv Profi Prep Set Prof. Marinello, Dr. Zitzmann, University of Basel, Switzerland

Intensiv Uniprep Set Crowns & Bridges Prof. Dr. C. Marinello, Universities of Zurich and Geneva, Switzerland

Diamond instruments for fixed and removable prosthetics

Diamond instruments for crown and bridge prosthetics

Ref. 088: 8510, 8514, 8614, 3510, 3514, 3614, 3513, 3513N 3517

Ref. 066: 101C, 201C, 241, 255, 315S, 315SGB, 315L, 315LGB, D01, D02, D9GB, 50D9 Intensiv Shoulder Bevel Prep Set Dr. A. Schรถler, Biel, Switzerland

Intensiv Universal Set University of Zurich, Switzerland

Diamond instruments for crown preparations with shoulder and bevel

Diamond instruments for preparation and finishing of cavities in aesthetic adhesive restorations in posterior teeth

Ref. 35A: 238C, 8238, 4238, 8195, 4195, 8325L, 4325L, 113AC, 8201NL, 4201NL, 8200, 4200, 8201, 4201, 8400, 4400, 8255A, 4255A

Ref. 001: 01140, 01125, 01480, 01440, 01425 Intensiv Tooth Caring Bur Set University of Bern, Switzerland Diamond instruments for lowering and finishing gingival floors of proximal cavities and shoulders of crown preparations without damaging adjacent teeth

Intensiv Zirkon Set Clinically approved by Swiss dental laboratory Dubs, Zurich, Switzerland Diamond-coated Instruments for Zirconium Oxide Preparations in the Dental Laboratory

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

45

Intensiv Guided Universal Prep Set Prof. Christoph Hämmerle, Clinic for Fixed and Removable Prosthodontics, University of Zurich Prof. Irena Sailer, University of Geneva, Switzerland

Innovative Prep set in Intensiv stainless steel tray Imprinted diagram guides through the current preparation methods of modern reconstructive dentistry To meet the clinical needs of modern dentistry, the dentist has to have easy access to appropriate tools.

Dimension- and shape-congruent instruments are one of the main premises for the success of modern high-quality reconstructions. The practitioner prefers to reach the desired treatment goal with as few perfectly adapted instruments as possible.

Intensiv, as manufacturer of superior diamond-coated instruments, offers all the instruments which serve the purpose of modern reconstructive dentistry. The new digital technology of the optical impression of tooth stumps and cavities requires a perfected, goal-oriented set of rotating and oscillating diamond instruments. A precise, tissueconserving preparation for the manufacture of veneers, inlays, overlays, tabletops and adhesive bridges is permanently secured in the desired highest quality.

Product description Tray: Two-piece stainless steel tray, consisting of a base, connected with a detachable lid.

Dimensions: length 77mm, width 75mm, height 31mm.

The tray is printed with a diagram as well as pictograms of the instruments for secure, structured guidance through the clinical applications.

Instruments: Diameter and shape of the finishing burs are congruent with the preparation instruments for the smoothing of the prepared tooth surfaces.

The 90μm grit of preparation instruments permits the efficient removal of material without causing tissue damage or trauma to the pulp.

Rounded shapes allow a simple instrument of the two congruent preparation and finishing burs, even with wide steps and near to the gingiva.

Different abutment levels are prepared easily in two steps, thanks to the working part length of 10mm: - preparation instruments for pillar reduction with a grit of 90μm - Dimension- and shape-congruent instruments with a grit of 40μm for finishing.

Indications Veneer preparation Crown preparation Full ceramic reconstructions Reconstructions with zirconium oxide ceramic Optical impression and CAD/CAM From minimal-invasive to conventional preparation technique Benefits Clearly defined and effective application of diamond instruments, thanks to the diagram printed on the tray chart with a fixed sequence of instruments and their grits Unique, innovative prep set for all types of modern reconstruction Secure identification and storage of instruments The tray can be sterilized by a validated method

Ref. 158

46

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

New

1

2

3

4

5

6

7

8

9

10

11

12

Classic veneer 1) Before preparation, an ultra-fine retraction thread was placed in the sulcus to protect the gingival margin. Interdental preparation with separation instrument FG D3 2) Axial reduction with veneer preparation instrument FG D18GB, 0.5mm wide shoulder preparation Additional veneer (purely defect-oriented preparation) 3) Interdental defect-oriented preparation with separation instrument FG D3 4) Axial reduction with veneer preparation instrument FG D18GB, tapering edge 5) Veneer detail Full crown preparation 6) Shoulder preparation on tooth 21: placing of an ultra thin thread, interdental separation with separation instrument FG D3, 1mm wide circular internally rounded shoulder preparation with shoulder instrument FG 305L. The preparation set includes a narrow shoulder preparation instrument FG 307A for narrow tooth abutments and tight spaces 7) Palatal concavity with frontside rounded football instrument FG 250 8) Finishing of the shoulder and axial walls: the stump is smoothed with the newly developed - analogous to the dimensions of the preparation instrument - cylindrical finishing instrument FG 4307N (wide) Partial crown, overlay (tabletop) preparation 9) Defect-oriented overlay (tabletop) preparation on a patient with dentition damaged by erosion and abrasion, rough preparation with preparation instrument FG 8526, occlusal preparation with football instrument FG 250 10) Finishing with appropriate finishing burs FG 4526 and FG 4250, posterior breaking of all sharp edges with Soflex discs clamped into the mandrel Adhesive bridge preparation 11) Definition of a mesial and distal groove in the enamel in the desired direction of insertion, slightly palatal to the future contact point, with separation instrument FG D3 12) Expansion of groove in the enamel with conical veneer preparation instrument FG D18GB, thereby fulfilling currently valid requirements for full ceramic and CAD/CAM production (apically rounded, 6° conicity, clear groove definition) 13) Preparation of a cingulum support in the enamel with ball instrument FG 201

13

Clinical pictures: Zentrum fĂźr Zahnmedizin ZZM Zurich, Switzerland

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

47

Intensiv Sets Direct and Indirect A & P Clinically tested by Dr. Roberto Spreafico, Busto Arsizio, Italy

Diamond instruments for anterior and posterior direct and indirect restorations Aesthetic direct and indirect restorations play a predominant role in the technical background of modern dentistry and represent a new limit between the conservative dentistry and the prosthesis for recovering individual elements.

A complete set of instruments for all clinical indications in the field of direct and indirect aesthetic restorations, is selected.

Ref. N202PI

Ref. N202PD

Product description 3 sets of 8 diamond-coated instruments each, placed in the stainless steel Intensiv HygienicTray HT100.

Ref. N202PI (Posterior indirect restorations) 1 conical instrument, 8mm length, 80μm grit, 012 diameter for interproximal separation.

2 conical instruments, 8mm length, 80 and 25μm grits, 014 diameter for interproximal preparation.

2 conical instruments, 6mm length, 80 and 25μm grits, 014 diameter for the preparation of internal walls of the cavities.

1 conical tapered instrument, 4mm length, 25μm grit, 020 diameter for the finishing of occlusal surface of the cavity.

2 conical tapered instruments, 6mm length, 80 and 25μm grits, 018 diameter for cervical preparation.

Ref. N202PD (Posterior direct restorations) 1 cylindrical instrument, 3mm length, 80μm grit, 009 diameter for the opening of the cavity.

2 cylindrical instruments, 6mm length, 80 and 25μm grits, 011 diameter for the preparation and finishing of the interproximal and occlusal margins.

2 cylindrical instruments, 8mm length, 80 and 25μm grits, 014 diameter for the preparation and finishing of the interproximal and occlusal margins.

2 cylindrical instruments, 6mm length, 80 and 25μm grits, 013 diameter for the preparation and finishing of the interproximal and occlusal margins.

1 flame instrument, 7mm length, 40μm grit, 010 diameter for the finishing of veneer preparation.

Ref. N202ADI (Anterior direct and indirect restorations) 1 ball instrument, 60μm grit, 009 diameter for the opening of the cavity.

2 ball instruments, 90 and 40μm grits, 014 diameter for the preparation and finishing of the interproximal and occlusal margins.

2 ball instruments, 106 and 40μm grits, 023 diameter for the opening and beveling of palatal margins.

2 cylindrical instruments with rounded end, 10 mm length, 90 and 40μm grits, 012 diameter for the production of guiding grooves and the finishing of veneer preparation.

1 flame instrument, 7mm length, 40μm grit, 010 diameter for the beveling of axial walls.

Indications Preparation of cavities for direct and indirect restorations in anterior and posterior areas Benefits Highly conservative preparations with perfectly finished walls and margins of cavities Placed in Intensiv HygienicTray (HT100) bur holders, to facilitate the identification and the organization of the sets Customizable sets with additional instrument insertion (oscillating instruments, rubber cups etc.) thanks to the 13 FG and 5 RA holes Form and size congruence between the preparation and finishing instruments

Ref. N202ADI

48

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

1

2

3

4

5

6

7

8

9

10

11

12

1) FG 8427/8425: Interproximal and cervical preparation 2) FG 8525: preparation of the walls 3) FG 3427/3425: finishing of interproximal and cervical margins 4) FG 3413R: finishing of the occlusal surface 5) FG 8212S: opening of the cavity for direct restorations 6) FG 8510/8614/ 8514: preparation of interproximal and occlusal margins 7) FG 3514/3614B/3414B: finishing of the margins 8) FG 4205L: beveling of axial walls 9) FG 200S/201S/400S: opening and preparation of the cavity 10) FG 4201S/4400S: beveling of palatal margin 11) FG 305L: production of vestibular guiding grooves and preparation of incisal margin 12) FG 4307N: finishing of the preparation for veneers

Intensiv Set Indirect Posterior Clinical pictures: Dr. Roberto Spreafico, Busto Arsizio, Italy

Intensiv Set Direct Posterior

Intensiv Set Direct & Indirect Anterior

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

49

Intensiv Advanced Prep & Finishing Set for Cerec Restorations Dr. A. Bindl, University of Zurich, Switzerland

Diamond instruments for inlays, partial and full crowns, and fixed restorations Both bur sets fulfill in an ideal manner all the requirements for superior multipurpose preparation and finishing goals created by Cerec 3 technology.

Product description Inlay cavities and partial crowns: 4 cylindrical burs, ISO sizes 011 and 014 with rounded edges and head lengths of 5, 6, and 8mm in grits 80 and 25μm for the preparation of precise inlay cavities and finishing of box margins while avoiding enamel fractures, as well as for partial crown preparation.

Tapered burs, ISO size 018, with rounded edges in 25μm grit for minimal occlusal enlargement of the box.

1 thin, tapered bur, ISO size 010 in 25μm grit for finishing deep proximal boxes.

Crown Preparation: 1 needle tapered bur, ISO size 012 for separation.

Cylindrical and conical truncated burs with rounded edges, ISO sizes 014 and 016, as well as torpedo burs, ISO size 014 in grits 80 and 25μm for circular preparations and finishing of chamfer and shoulder preparations. The torpedo burs are also used for the preparation and finishing of veneer restorations.

1 football bur, ISO size 022 with tip, 80μm grit for occlusal reduction and preparation of labial parts.

Shape and dimension matching bur with round tip, ISO size 021, 40 μm grit, for finishing labial preparation surfaces.

Finishing: 4 flame burs, head lengths 3 and 5mm, ISO sizes 012 / 013 / 014 in 40 and 8μm grit for contouring and finishing of the CAD/CAMgenerated occlusion.

1 ball bur, ISO size 009, in 60μm grit for the preparation of minimal access cavities.

1 ball bur, ISO size 012, for placement of the preparation borders on the gingival margin in veneer restorations.

2 balls, ISO size 024, in 40 and 8μm grit for finishing and prepolishing of palatal concavities.

2 Files, PS2 and PS9 for preparation and finishing of approximal areas.

Indications Cavity preparation for inlay and partial crowns and for full ceramic bridges in zirconium oxide Contouring and finishing of the CAD/CAM-generated occlusion Benefits Precise cavity contours for optical identification Preservation of healthy tooth substance Prepolishing with reduced roughness depth Method clinically tested by the University of Zurich

Ref. 222A

Ref. 222B

Intensiv ApproxOpener Manual and serrated metal strip for removal of coronal excess of adhesive aesthetic restorations Within the adhesive indirect restoration, material excess may emerge at coronal level.

The removal of emerged adhesive material is necessary to ensure the long life of the restoration.

50

Indication Removal of emerged adhesive material in the coronal area

Benefits Removal of emerged adhesive material without scratches thanks to non-diamond coated version Secure strip movement thanks to tension of the strip in the bow Sterilizable, reusable

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

1a

1b

3

2a

4

2b

5

Clinical pictures: University of Zurich, Switzerland

1a) Shoulder preparation on tooth 21: The circular shoulder is structured with a plane front face using FG 8422. Shoulder width approx. 0.8mm 1b) Finishing the preparation: the tooth stump is finished with FG 3614B 2a) Preparation of chamfer on tooth 11: The circular chamfer is prepared with FG 8040 2b) Finishing the preparation: the stump is finished with FG 3040B 3) Shoulder preparation: defect-oriented crown preparations on molars and premolars after finishing for adhesive attachment of full ceramic Cerec crowns 4) Defect-oriented partial crown preparation to be treated with a Cerec restoration 5) Veneer preparations on the lateral incisor teeth without inclusion of the incisal edges

Advanced Prep Set for Cerec Restorations

Advanced Finishing Set for Cerec Restorations

* *

(* Intensiv Proxoshape, see page 60)

Serrated

Ref. AO2018/3 Intensiv ApproxOpener

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

51

Intensiv Universal full Crown and Porcelain Veneer Prep Set Universal Crown & Veneer Prep Set Dr. G. Dazhaev, Moscow, Russia

Diamond Instruments for crown and bridge prosthetic restorations Often during prosthetic preparation it is necessary to follow a simple, accurate, repeatable and reliable method.

The method created by Dr. Dazhaev, Moscow, in collaboration with Intensiv, allows for a structured process, thanks to the adequate selection of instruments and the production of special shapes, ensuring long-term outcome.

2 egg-shaped instruments for palatal reduction and finishing (FG 250C, FG 4250B).

3 small wheel-shaped instruments as depth marker of the preparation of veneers (FG 102AC, FG 103AC, FG 108AC).

Product description Special instrument (FG 707C) to mark the depth of occlusal cut.

Cylindrical and conical tapered instruments in 125μm grit and rounded end (FG 309C, FG 321C, FG 235AC, FG 305LC) for enamel reduction.

Cylindrical and conical tapered instruments in 40μm grit and rounded end (FG 4315S, FG 4235S, FG 4307N) for finishing the preparation.

Benefits Rapid and very precise tooth reduction at the same time New depth markers to see exactly how much tooth structure needs to be reduced Very accurate crisp chamfer creation Composition of this set allows following both, classic and minimal invasive approach to preparation

Indications Preparation of full crowns Preparation of porcelain veneers

Clinical pictures: Dr. G. Dazhaev, Moscow, Russia

52

1

2

3

4

5

6

7

8

1) Creation of grooves in the incisal edge with 2mm depth marker with instrument 707C 2) Reduction of tooth substance at the bottom of the grooves with instrument 235AC 3) Preparation of the incisal third of facial surface with instrument 235AC 4) Finishing and polishing of the margin with instrument FG 4307N 5) Creation of grooves with 2mm depth marker with instrument FG 707C 6) Reduction of tooth substance at the bottom of the grooves with instrument 235AC 7) New grooves created in the vestibular and palatal surfaces of the tooth with instrument FG 305L 8) Finishing of preparation margin with instrument FG 4315S

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

Intensiv Modular Veneer Set Dr. A. Schöler, Biel, Switzerland

Diamond instruments for Veneer preparations Ceramic veneers are generally seen today as a minimal invasive and long lasting reconstruction form. Tooth preparation defined and restricted to the enamel is a prerequisite for permanent, tooth-friendly veneer placement.

Indication Preparation of veneers Benefits Maintenance of the recommended penetration depth of 0.4mm Complete bur set for veneer preparations

1

2

3

4

1) FG 200S 2) FG S4 3) FG 101 4) FG 4310S

Intensiv Geneva Prep Set University of Geneva, Switzerland

Diamond instruments for crown and bridge prosthetic restorations Burs for classic crown and bridge restorations according to methods developed at the University of Geneva.

Indication Abutment preparation for crowns and bridges Benefits Reduced number of burs for complex preparation procedures Method tested by the University of Geneva

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

1

2

3

4

1) FG D16 2) FG 237 come FG 235, 237 o 240 3) FG D6 e 235 4) FG 255

53

Intensiv PrepTwins

Pat.Pend.EP10162150.6

Clinically tested by the University of Zurich, Switzerland

Diamond Polymer Finisher for refined shaping of all preparations Finishing of preparation margins is essential and propaedeutic for the next treatment steps.

The removal of detached enamel prisms and irregular surfaces (so called wave structure) created by rotating instruments, allows an improvement and longer life span of intact restorations.

Product description Diamond Polymer Finisher highly loaded in 3 different diamond grains each to refine preparations.

The diamond grains are marked in the polymer by the color brown (60μm), red (40μm) or yellow (15μm).

Diamond instruments are covered by a polymer/diamond mixture, respecting the same form and dimension as the previous applied diamond instrument.

The metal core below the polymer is coated with the same diamond grain as the diamond polymer mixture.

Forms: ball, cylinder, flame, football, torpedo, tapered cone.

Recommended speed: max 20.000 rpm with water spray, minimum 50ml/min.

Length: ball 2mm, cylinder and tapered cone 10mm, flame 4mm, football 3.5mm, torpedo 6mm.

Sterilizable, reusable.

Indication Finishing of the specific created preparation Benefits Form congruent Diamond Polymer Finisher to the previous applied preparation diamond instrument Preserve specific created preparations Diamond coating on the metal core avoids metal signs on surface Selected grain in relation to the degree of adaptation

1

2

3

4

1) Initial situation 2) Finishing of cavity edges with Intensiv PrepTwins RA PT4882/6, cylinder, 40μm, visible irregulary margin caused by the rotating diamond instrument 3) Finishing advanced stage, visibly smoother cavity margin 4) Regular cavity margin preserving the specific created preparation

a)

Intensiv PrepTwins, Trial Kit, 60μm Ref. RA PT2460/6

54

Intensiv PrepTwins, Trial Kit, 40μm Ref. RA PT2440/6

Intensiv PrepTwins, Trial Kit, 15μm Ref. RA PT2415/6

b)

The metal core (a) below the polymer is diamond coated equally to the diamond grain in the polymer (b).

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

4

10

17

1

2

3

5

6

7

8

9

11

12

13

14

15

16

18

19

20

21

22

23

Clinical pictures: Dr. Alessandro Devigus, Bülach, Switzerland

Intensiv PrepTwins are available in packages of 6 pieces

Posterior bite-raising 1) Initial clinical case: creation of the Table top on elements 44, 45 and 46 for the production of ceramic inlays with the CAD/CAM system 2) Lowering of the interproximal crown margins with the FG 301, 90μm instrument 3) Deepening and mesial/distal opening of the interproximal space intended for positioning of the prosthetic device 4) Opening of proximal contacts, performed manually with Intensiv ProxoContour Coarse, characterized by 80μm grit and two rows of perforations 5) Preparation completed 6) Advanced preparation of the edges conducted with Intensiv PrepTwins RA PT801, 60μm, which allows for a distinctly improved optical image capture 7) Obvious improvement of the margins after being treated with the Finisher 8) Digital image that clearly shows the preparation margin 9) Edges are perfectly suited to the restoration Bite-raising erosion 10) Creation of inlay on element 14: preparation of the edges with diamond-coated instrument FG 307L, 90μm 11) Performed preparation, elimination of insufficient composite restoration in distal area 12) Advanced preparation with Intensiv PrepTwins RA PT4882, 40μm 13) Optical impression highlighting the excellent margin preparation 14) Calculated digital image of the restoration 15) Evidence of the improvement of the preparation margins 16) Case concluded, cementing of the created inlay, ideal closure between dental tissue and restoration Class III restoration 17) Initial case: Class III lesions on elements 12 and 11 18) Preparation of the two cavities with FG 201, 80μm diamond-coated instrument 19) Removal of detached enamel prisms and opening of the edges adjacent to the lesions in the palatal direction 20) Beveling of the margins with FG 255, 90μm diamond-coated instrument 21) Finishing of the margin with FG 4255, 40μm diamond-coated instrument 22) Advanced preparation and elimination of the irregularities carried out with Intensiv PrepTwins RA PT5368, 15μm: clear improvement of the state of the preparation margin 23) Case concluded

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

55

Intensiv Cerinlay Set University of Berlin, Germany

Special diamond instruments for inlay cavity preparations according to methods developed by the University of Berlin Restorations using ceramic inlays require simple preparations with rounded interior edges and sharp cavity margins without bevelling. The slightly tapered shape and suitable small diameters of these burs make undercut-free cavity preparation possible.

Product description 4 tapered burs with rounded edges, ISO sizes 014 and 018, head lengths 6.0 and 8.0mm, in 80μm grit for cavity preparation.

4 shape and dimension matching burs in 25μm grit for finishing fracture-free cavity margins.

Indication Preparation and finishing of ceramic inlay cavities for premolars and molars Benefits Preparation method clinically tested at the University of Berlin Finishing of fracture-free enamel margins Split-free marginal integration of inlays

Ref. 011

Intensiv Minimal Invasiv Prep Set University of Zurich, Switzerland

Diamond instruments for minimally invasive restorations Minimally invasive restoration techniques are designed to preserve healthy tooth substance. A defectoriented procedure therefore requires preparation techniques with appropriately miniaturized bur shapes.

Product description 1 cylindrical bur, ISO size 007, head length 2.0mm, in grit 40μm for exact depth control and finishing.

2 ball burs, ISO size 007, in 40μm grit with various neck lengths for access cavity and probing cavity for extended fissure sealing.

1 wheel bur, ISO size 015, head length 0.7mm in 40μm grit for enamel-preserving undercutting preparations.

Indications Preparation of: Class I amalgam and composite fillings Classes II and III composite fillings Palatal fillings Tunnel preparations Benefits Preservation of healthy tooth substance Preservation of marginal ridge in tunnel preparations Selective access No need of final polishing

Ref. 144

56

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

1

2

3

1,5 mm

4

1

1,5 mm

1) Ceramic inlay cavity preparation with instrument FG 8526 2) Cavity finishing with instrument FG 3526 3) Cavity finishing with instrument FG 3525 4) Minimum diameter of the ceramic inlay 1.5mm 5) Minimum height of the ceramic inlay at the fissure 1.5mm

5

2

3

4

5

1) Probing cavity 2) Depth control of the preparation with instrument FG 4612 3) Undercutting preparation without enlargement of the cavity access with instrument FG 4612 4) Preparation of the palatal micro cavity with instrument FG 4610 5) Palatal opening and preparation of an anterior cavity with instrument FG 4610

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

57

Intensiv Swingle Clinically tested by the Universities of Zurich and Bern, Switzerland

In case of abutments and cavities preparation, as well as restoration materials finishing, the most utilized system in the dental office is based on rotating instruments use. There are, however, precise limits within which a rotating instrument cannot be used; functions may be limited or potentially dangerous due to limited control application. In all these cases it is appropriate to accompany the use of rotating instruments with complimentary oscillating systems that reduce the risk of potential iatrogenic injury, improving significantly the quality of the surfaces being worked on.

The principle of action of oscillating files is based on the mechanical transformation of a rotating motion into a reciprocal stroke movement in the contra-angle.

ciillllaattiioons 20.0000 osc cal roca ci c pro 1..88 mm ree

The dual contra-angle Intensiv Swingle For the use of oscillating files and strips (see page 68). The contra-angle Intensiv Swingle has 2 functions in conjunction: the freely rotating axial position to use with diamond coated files like Intensiv Proxoshape and fixed axial position with the application of oscillating files like Intensiv Bevelshape.

The contra-angle head is of small size to allow an extensive view on the operating field.

Product description Contra-angle with integrated water spray and optional light.

Stroke 0.9mm.

20.000 oscillating movements with 40.000 rpm.

With toggle switch to choose free moving or fixed position of files 12 different axial fixed positions on 360°.

File ejector and cleaning needle (water spray canals) are included in delivery.

Indications Minimally invasive precise elaboration of preparations and finishing proximal surfaces restored Fast and efficient removal of filling excess, finishing and polishing of restorations Benefits 2 applications with one contra-angle only, axially freely rotating or axially fixed files Extensive view on the operating field due to small size contra-angle head and light 20.000 oscillating strokes per minute for better grinding and polishing efficiency For Intensiv Swingle a two-year warranty is granted Sterilizable

A simple to move toggle switch at the contra-angle head permits to choose between axially free rotating or axially fixed files.

File axially fixed/locked Application with light

1

File axially free rotating 2

Clinical pictures: Dr. Alessandro Devigus, Bülach, Switzerland

1:1

58

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

3

3) Interproximal finishing with Intensiv Swingle and Intensiv Proxoshape PS2 4) Finishing of vestibular surface with Proxoshape PS2 and Intensiv Swingle

4

Clinical pictures: Dr. Simona Giani, Varese, Italy

onal i s s e f o r P

Kit

New Intensiv Swingle Professional Kit, WG-69 LT Cons PROF, W&H Synea, with light Contra-Angle, Ref. WG-69 LT * Ejector, Ref. 053 Spray canal cleaner needle, Ref. 054 + 3 Intensiv Proxoshape Coarse, Ref. PSC80 + 2 Intensiv Proxoshape, Ref. PS1 + 2 Intensiv Proxoshape, Ref. PS2 + 2 Intensiv Proxoshape, Ref. PS3 * Contra-Angle without light: Ref. WG-69 A

Combined system for the best performance When treating interproximal restorations, the highest performance level with maximum benefit is guaranteed by the combination of:

Adjust Intensiv Swingle to its highest speed 40.000 rpm (= 20.000 oscillations)

ble Availa

April 2

Press only until the file starts to bend slightly

Diamond grain of the Proxoshape files is chosen according to the desired treatment objective

017

New

Intensiv Swingle, WG-69 LT W&H Synea, with light Contra-Angle, Ref. WG-69 LT * Ejector, Ref. 053 Spray canal cleaner needle, Ref. 054 * Contra-Angle without light: Ref. WG-69 A

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

59

Intensiv Proxoshape Universities of Zurich and Bern, Switzerland p. 58

Oscillating diamond-coated files for the removal of overhangs and finishing of proximal filling surfaces Perfectly adapted and polished proximal filling surfaces and crown margins are a prerequisite for the maintenance of the health of the periodontics and the prevention of secondary caries. Proxoshape meets the requirements to correctly model the filling surfaces and margins and prepares them for the high gloss finish.

Intensiv Proxoshape 4 one-sided diamond coated files in grits 125μm / 90μm / 40μm / 15μm.

3 files with extended working surface in grits 90μm / 40μm / 15μm.

2 narrow files in grits 40μm / 15μm.

1 distal diamond-coated file in 15μm.

Indications Removal of: Filling and cement overhangs Finishing and trimming of: proximal crown margins in gold or ceramic Contouring and finishing of: proximal restoration surfaces Benefits Easier access to the interproximal space No iatrogenic damage to adjacent teeth Prevention of surface wave generation caused by rotating burs All Intensiv Proxoshape are available in packages of 1, 3 or 6 pcs Intensiv Proxoshape Set, Ref. 100 1 pcs of PS0, PS1, PS2, PS3, Ejector and Diakleen

Intensiv Proxoshape Flexible 3 single-sided diamond files in 60, 40 and 15μm.

2 file lengths: 8.5mm and 11mm.

Minimal metal thickness 0.1mm.

Intensiv Proxoshape Coarse One-sided diamond coated and perforated file, in 80μm, 2 rows of perforation.

apeTray Proxosh

p. 40

60

Intensiv Proxoshape Set Optional, Ref. 115 1 pcs of PS0, PS1, PS2, PS3, PS1L, PS2L, PS3L, PS2S, PS3S, PS3G Intensiv Proxoshape Flexible Set, Ref. 110 1 pcs of PSF60, PSF40, PSF15, PSF60L, PSF40L, PSF15L

1

2

3

4

5

6

Clinical pictures: 1-2) University Brescia, Italy 3-4) University Zurich, Switzerland 5-6) Dr. A. Devigus, Bülach, Switzerland Intensiv Proxoshape: 1) Interproximal restoration finishing with file PS2 2) Treatment of the zone underneath the reconstructed contact points without damaging the neighboring teeth with the PS3 file.

Intensiv Proxoshape Flexible: 3) Finishing of the cervical margin with the PSF40L file.

4) Finishing the interproximal restoration with the PSF15L file.

Intensiv Proxoshape Coarse: 5-6) Modeling with PSC80

To be used in combination with Intensiv Swingle, WG-69 LT Cons (with light), pages 58-59

N ew

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

Intensiv Bevelshape University of Bern, Switzerland p. 58

Oscillating diamond files for perfect bevelled edges and preparation margins A key factor for an ideal cavity preparation for composite fillings, gold inlays and overlays is a precise margin bevelling with sharp edges. In the case of prosthetic restorations, the margin finishing of shoulder preparations and the bevelling of chamfer preparations are decisive for the quality of the result. The single-side diamond coating helps to prevent iatrogenic damage to adjacent teeth and injury to periodontal tissue.

Product description Axially curved files with distally bent ends.

3 files diamond-coated over the entire convex working length in grits 40μm / 25μm / 15μm.

3 files diamond-coated over the convex distal end only in grits 40μm / 25μm / 15μm.

Indications Margin bevelling for - Anterior composites - Composite slots - Inlays and onlays Margin finishing in veneer preparations Crown preparations - Margin finishing in chamfer preparation - Bevelling in shoulder preparation Benefits Perfectly polished and clearly outlined profiles with perfect sharp cut edges No microfractures and no unforeseen chipping of dental enamel prisms Prevention of enamel defects and grooves on the preparation margin No iatrogenic damages to adjacent teeth

1

2

3

4

5

1+2) Perfect adaptation of the file to the cavity wall and floor 3) The file allows the bevelling of a cervical shoulder, as well 4) Margin finishing in veneer preparation with BS40 or BS40T 5) Margin bevelling in class IV restorations

All Intensiv Bevelshape are available in packages of 1, 3 or 6 pcs To be used in combination with Intensiv Swingle, WG-69 LT Cons (with light), pages 58-59

Intensiv Bevelshape Set, Ref. 103 1 pcs of BS40, BS25, BS15 BS40T, BS25T, BS15T

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

61

Intensiv Metal Diamond Strips Finishing and Polishing of aesthetical restorations in proximal surfaces Intensiv ProxoStrip, Intensiv ProxoStrip Anterior and Intensiv ProxoStrip Plus are unique double diamond-coated metal strip with two working areas with a grit of 40μm (red) and 15μm (yellow) respectively and perforated strip ends for a secure and ergonomic grip. The total length of the strips enables simplified finger support (Hypomochlion) during treatment. The 2.5mm height of the strip as well as the free zone between the working areas preserve the existing contact point.

In order to achieve device control optimization in some oral cavity areas, a system is needed that allows us to use the grip at a reduced distance from the operating field.

Product descriptions Metal strips, diamond-coated on one side, with two working areas of different grit sizes: 40μm (red) and 15μm (yellow).

Diamond-free zone between the diamond-coated surfaces.

Height: 2.5mm.

Thickness: 0.05mm.

Sterilizable, reusable.

Intensiv ProxoStrip Plus: Grips in sterilizable plastic, opposite white part = non-diamond coated surface of the strip.

Total length: 83mm.

Intensiv ProxoStrip Anterior: Grip secure strip ends, perforated and ergonomically designed.

Total length: 55mm.

Intensiv ProxoStrip: Grip secure strip ends, perforated and ergonomically designed.

Total length: 80mm.

N ew

Intensiv Metal Diamond Strips Trial Kit Ref. PXT/6: 2 Intensiv ProxoStrip 1 Intensiv ProxoStrip Anterior 2 Intensiv ProxoContour Coarse 1 Intensiv ProxoPolish

Intensiv ProxoStrip Pat. 699 819 Scientifically tested by the University of Ancona, Italy

A unique, diamond-coated metal strip with grips for the final polishing of proximal surfaces Indications Finishing and polishing of fillings and crown borders in proximal areas Removal of excess material and overhangs in filling surfaces and crown borders Beveling in adhesive restorations in the proximal cervical areas

Benefits Finishing and polishing in one process Short strip for improved finger support (Hypomochlion) while stripping Clinically perfectly polished proximal surfaces No injuries to patient (lips) or dentist (fingers)

Clinical pictures: Dr. Alessandro Devigus, Bülach, Switzerland

Total length 80mm

1:1

62

40μm

15μm

Ref. PX4015/6 Package of 6 Strips Ref. PX4015/12 Package of 12 Strips

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

Intensiv ProxoStrip Plus Pat. 699 819 Scientifically tested by the University of Ancona, Italy

A unique, diamond-coated metal strip with grips in plastic for the final polishing of proximal surfaces Indications Finishing and polishing of fillings and crown borders in proximal areas Removal of excess material and overhangs in filling surfaces and crown borders Beveling in adhesive restorations in the proximal cervical areas

Benefits Finishing and polishing in one process Short strip for improved finger support (Hypomochlion) while stripping Clinically perfectly polished proximal surfaces No injuries to patient (lips) or dentist (fingers)

Clinical pictures: Dr. Alessandro Devigus, Bülach, Switzerland

Total length 83mm

1:1

40μm

Ref. PXP4015/6 Package of 6 Strips Ref. PXP4015/12 Package of 12 Strips

15μm

Intensiv ProxoStrip Anterior

New

Pat. 699 819

Clinically tested by the University of Geneva, Switzerland

The only short metal diamond-coated strip with grips for interproximal finishing of anterior restorations Indications Finishing and polishing of fillings and crown borders in anterior proximal areas Removal of excess material and overhangs in filling surfaces and crown borders Bevelling in adhesive restorations in the anterior proximal cervical areas

Benefits Finishing and polishing in one process Ergonomic grip for simple, safe use Short strip for improved finger support (Hypomochlion) while stripping and shorter leverage

Clinical pictures: Dr. Alessandro Devigus, Bülach, Switzerland

Total length 55mm

1:1

40μm

15μm

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

Ref. PXA4015/6 Package of 6 Strips Ref. PXA4015/12 Package of 12 Strips

63

Intensiv Metal Diamond Strips Contouring, Finishing and Polishing of aesthetical restorations in proximal surfaces During creation of pronounced direct and indirect adhesive restorations undesirable material excess on approximal surfaces and margins could occur.

Material excess must necessarily be removed to ensure the stability of the restoration itself and its long term clinical success.

Polished surfaces in proximal areas contribute significantly to avoid plaque-accumulation and support patient-prophylaxis. In addition, stain removal meets the patient's aesthetic requirements.

Product descriptions Metal strips, diamond-coated on one side, with two working areas of different grit sizes.

Diamond-free zone between the diamond-coated surfaces.

Grip secure strip ends, perforated and ergonomically designed.

Height: 2.5mm.

Thickness: 0.05mm.

Total length: 80mm Sterilizable, reusable.

Intensiv ProxoContour: Grit sizes: 60μm (brown) for contouring and 40μm (red) for finishing.

Intensiv ProxoContour Coarse: Grit sizes: 80μm (blue) for contouring and 40μm (red) for finishing.

Perforated with three rows of holes.

Intensiv ProxoPolish: Grit sizes: 15μm (yellow) for polishing and 8μm (orange) for high gloss.

N ew

Intensiv Metal Diamond Strips Trial Kit Ref. PXT/6: 2 Intensiv ProxoStrip 1 Intensiv ProxoStrip Anterior 2 Intensiv ProxoContour Coarse 1 Intensiv ProxoPolish

Intensiv ProxoContour

Pat. 699 819

Clinically tested by the University of Zurich, Switzerland

Unique one sided diamond-coated metal strip with ergonomic handles in two grit sizes for contouring and finishing of proximal aesthetic restoration surfaces Indications Removal of marginal material excess of direct and indirect adhesive reconstructions Contouring and finishing of specific excess of pronounced aesthetic restorations)

Benefits Efficient manual contouring of the proximal filling morphology Finishing of the roughened surfaces in one process Short strip for improved finger support during treatment No injury risk of soft tissue (lip cutting)

Clinical pictures: Dr. S. Giani, Varese, Italy

Total length 80mm

1:1

64

60μm

40μm

Ref. PXC6040/6 Package of 6 Strips

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

Intensiv ProxoContour Coarse Pat. 699 819 Clinically tested by the University of Zurich, Switzerland

Unique one sided diamond-coated metal strip with ergonomic handles in two grit sizes for contouring and finishing of proximal aesthetic restoration surfaces Indications Removal of marginal material excess of direct and indirect adhesive reconstructions Contouring and finishing of specific excess of pronounced aesthetic restorations

Benefits Friction-free application due to perforation of the diamond coated strip part Fast and efficient removal of excess material due to the coarse grain size

Clinical pictures: Dr. A. Devigus, Bülach, Switzerland

Total length 80mm

80μm 1:1

40μm perforated metal strip

Ref. PXCC8040/6 Package of 6 Strips

Intensiv ProxoPolish Pat. 699 819 Clinically tested by the University of Zurich, Switzerland

Unique one sided diamond-coated metal strip with ergonomic handles in two grit sizes for efficient stain removal and manual polishing of proximal surfaces Indications Stain removal in proximal areas Gloss polishing in proximal areas To complete the professional dental hygiene in the proximal zone

Benefits Efficient manual cleaning and polishing in one treatment process with the same instrument Ergonomic strip handles and short strip for simple and easy use No injury risk of soft tissue (lip cutting)

Clinical pictures: Dr. S. Giani, Varese, Italy

Total length 80mm

1:1

15μm

8μm

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

Ref. PXPO1508/6 Package of 6 Strips

65

Intensiv Composhape Set 1 University of Zurich, Switzerland

Diamond instruments in extra fine grits for contouring and finishing composite fillings Contouring and finishing of composite fillings is an important step in restorative dentistry. Tooth substance must be preserved and enamel and filling fractures avoided to prevent infiltrations and secondary caries.

Product description 3 flame burs, ISO sizes 010 / 012 and 014; 1 football bur, ISO size 021, and 2 ball burs, ISO sizes 017 and 024 in 40μm grit for nondestructive finishing of fissures and filling margins of anterior and posterior composite fillings.

Shape and dimension matching burs in 15μm grit for finishing enamel margins in adhesive preparations, finishing fissure and extended fissure sealings.

Indications Contouring and finishing of: Composite fillings in anterior and posterior teeth Extended fissure sealings with flowable composites Enamel margins in adhesive preparation (15μm) Benefits Significant reduction of enamel and filling margin fractures Smooth filling surfaces ideally prepared for high gloss polishing Clinically tested by the University of Zurich

Ref. 015

Intensiv Composhape Set Anterior & Posterior University of Zurich, Switzerland

Diamond instruments in ideal extra fine grits for finishing composite fillings, according to the demands on posterior fillings Finishing of adhesive restorations must be non-destructive and tooth surfaces must be carefully prepared for final polishing. Use of these burs preserves far more tooth substance than that obtained with conventional finishing burs. Fractures of enamel and composite margins are significantly less common. A greater amount of perfect margins is therefore produced.

Product description 2 flame burs, short and long, ISO sizes 014 and 012, 40μm grit for fissure finishing.

1 inverted cone, ISO size 013, 40μm grit with rounded edges for contouring of fissures with adjacent cups.

1 football bur, ISO size 021 and 1 ball bur, ISO size 017, 40μm grit for special contouring of occlusal and palatal filling surfaces.

Shape and dimension matching burs in 15μm grit for finishing and prepolishing of tooth-coloured restorations.

Indications Finishing of: Composite fillings in anterior and posterior teeth Composite and ceramic inlays and veneers Extended fissure sealings with flowable composites Enamel margins in adhesive preparations Benefits Significant reduction of enamel and filling margin fractures (non-destructive) Perfectly smooth filling surfaces ideally prepared for the high gloss polishing Tested clinically by the University of Zurich

Ref. 018

66

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

1

2

3

Clinical pictures: University of Zurich, Switzerland

1

2

3

Clinical pictures: University of Zurich, Switzerland

4

1) Proximal and subgingival finishing with instrument FG 4062 2) Finishing of occlusal filling surfaces with instrument FG 4255 3) Finishing of the filling margin with instrument FG 4205 4) Finishing of central fissures with instrument FG 4201

1) Finishing of the fissures with FG 5274 2) Finishing of the occlusal filling surfaces with instrument FG 4201 3) Finishing of the palatal filling surfaces with instrument FG 4250

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

67

Intensiv UniglossCellbrush

Pat.Pend.EP10405114

Clinically tested and scientifically proven by the University of Zurich, Switzerland

ste!

out pa

with lication

App

Never achieved high gloss and completely smooth surfaces of aesthetic restorations with polishing brushes due to new diamond-filled from hard to soft variable cellulose-filaments Product description Polishing instrument with cellulosefilaments highly filled with ultra-fine diamond particles.

Cellulose-filaments change from hard to ultra-soft through water absorption.

UniglossCellbrush is to be sterilized before first use.

Single use recommended (water and debris absorption, deformation, filament losses).

Atraumatic to the soft tissue.

Sterilizable.

Indications Final high-gloss polishing of all aesthetic restorations Maintenance of existing restorations

Ref. 2200/18

Benefits Totally atraumatic to gingiva Ultra soft filaments fully adapt to the tooth morphology Replica of the tooth anatomy (macro-morphology) achieved through finishing treatment remains intact Scientifically proven improved high gloss and smoother surfaces compared to currently available results with polishing brush application Application without paste

Ref. 2200/6

Intensiv UniglossPaste Clinically tested and scientifically proven by the University of Zurich, Switzerland

One step universal extra fine grit diamond paste with uniquely surface adapted micro grain for high gloss polishing of all aesthetical restorations Product description Polishing paste with a significant proportion of ultrafine granulated natural diamonds, in its composition adapted to the surface roughness of aesthetical restorations.

The selected mixture of the diamond grits represents the first range of the ultra fine diamond granulate.

The composition of Intensiv UniglossPaste contains specific substances which guarantee a thixotropic effect.

Blue paste without any odour nor taste.

Indications Final polishing and high gloss shining for the surfaces of all aesthetic dental materials Maintenance of existing aesthetic restorations

Intensiv UniglossPolisher

Benefits Can be used with either standard nylon bristle junior cup brush or Prophylaxis rubber cup – without splattering Fast high gloss polishing in 15 seconds only Surface roughness of treated surface similar to that of natural enamel Only one paste for treatment of all aesthetic dental materials

Pat.Pend.EP10162150.6

Clinically tested and scientifically proven by the University of Zurich, Switzerland

Shape stable flexible Diamond Polymer Polisher for high gloss polishing of aesthetic restorations Product description Diamond Polymer Polisher highly loaded with ultra-fine diamond particles.

Slim flame and compact cup, uncoloured.

Inner core of flame and cup shape and mandrel consist of one piece of blue-green resistant polymer.

Sterilizable, reusable.

68

Indications Final high gloss polishing of convex and pronounced concave surfaces of aesthetic restorations Maintenance of existing aesthetic restorations

Benefits Stable form of flame and cup shape through multiple use Superior gloss effect and minimal surface roughness Polymer core of the form avoids metal signs on surfaces Complete fissure polishing thanks to flexible but stable tip Protection of marginal closure of restorations

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

l

ingiva

s and g Margin s border

1

2

3

1) UniglossCellbrush one step high gloss polishing with hard filaments 2) The cellulose-filaments change through water absorption from hard to soft 3) UniglossCellbrush, high gloss polishing with soft filaments 4) Adaptive to convex tooth-morphology, low vibration

4

Clinical pictures: Dr. S. Giani, Varese, Italy / Dr. A. Devigus, BĂźlach, Switzerland The Intensiv UniglossCellbrush is a unique diamond-filled high-gloss polishing instrument made of cellulosefilaments which through water absorption change from hard to ultra soft and are thus atraumatic to the gingiva and vibration-free in use.

Absolutely atraumatic!

Filaments filled with diamond!

1

2

Clinical pictures: Dr. S. Giani, Varese, Italy

faces

ne sur

d pla rge an

La

Intensiv UniglossCellbrush Ref. 2200/6 Package of 6 pcs Ref. 2200/12 Package of 12 pcs Ref. 2200/18 Package of 18 pcs

1) Labial surface finishing with Proxoshape PS3 2) Polishing paste UniglossPaste well visible on restored tooth surfaces 3) Final polishing without splattering

3

Application with standard nylon bristle junior cup brush!

Ref. 2500 Syringe of 2.5g

convex e and v a c n o C ology morph h t o o t

a) b) Clinical pictures: Dr. S. Giani, Varese, Italy

Ref. 2300/6

c)

a) Highly loaded with ultra-fine diamond particles b) New shaped core follows exactly the flame and cup shapes c) Resistant polymer Intensiv UniglossPolisher, flame and cup Ref. 2300/6 Package of 3 pcs each Intensiv UniglossPolisher, flame Ref. 2310/6 Package of 6 pcs Intensiv UniglossPolisher, cup Ref. 2320/6 Package of 6 pcs

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

69

Intensiv Swingle Clinically tested by the Universities of Zurich and Bern, Switzerland

Calibrated and efficient stripping in orthodontics As part of orthodontic treatments, very many cases are documented treated through interproximal space gaining by stripping (IPR). A precise, calibrated reduction of approximal enamel parts is carried out protocolled step by step, assuring maximum safety. A finally well performed finishing and fine polishing contributes to healthy conditions of the treated teeth.

s iillllaatiioons .000 osc 20.0 cal r cciprooca re m m 1.88

The dual contra-angle Intensiv Swingle for application with oscillating Intensiv Ortho-Strips The contra-angle Intensiv Swingle combines both functions: - free axial rotating of the strip, being applied with finishing and polishing of prepared surfaces.

- fixed axial position (12 positions at each 30° within 360°) for exact positioning of the strip, being applied in the resolution of the contact point and for enamel reduction.

Moreover, the small sized contra-angle head allows a significantly improved view of the operating/surgical field.

A simple to move toggle switch at the contra-angle head permits to choose between axially free rotating or axially fixed Intensiv Ortho-Strips.

Strip axially fixed/locked

Product description Contra-angle with integrated water spray and optional light.

Stroke 0.9mm.

20.000 oscillating movements with 40.000 rpm.

With toggle switch to choose free moving or fixed position of strips.

12 different axial fixed positions on 360°.

Strip ejector and cleansing needle (water spray canals) are included in delivery.

Indications Interproximal space creation by stripping according to the protocol IPR (InterProximalReduction) in orthodontic treatments Finishing and final polishing of the treated dental surfaces Benefits Safe, efficient and precise interproximal enamel reduction as part of orthodontic treatment Easy, controlled opening of the contact points Homogeneous and smooth surfaces of the treated teeth Pleasant application equally for dentist and patients For Intensiv Swingle a two-year warranty is granted Sterilizable

Strip axially free rotating

1:1

70

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

1

1) Application in Orthodontics during stripping with Intensiv Ortho-Strips and Intensiv Swingle 2) Calibrated and efficient removal of enamel with Intensiv Ortho-Strips and Intensiv Swingle

2

Clinical pictures: Dr. Francesco Garino, Turin, Italy

onal i s s e f o r P

Kit

New Intensiv Swingle Professional Kit, WG-69 LT Ortho PROF, W&H Synea, with light Contra-Angle, Ref. WG-69 LT * Ejector, Ref. 053 Spray canal cleaner needle, Ref. 054 + 1 Intensiv Ortho-Strips System, opener, Ref. OS08OP-DS + 1 Intensiv Ortho-Strips System, extracoarse, Ref. OS80XC-DS + 1 Intensiv Ortho-Strips System, coarse, Ref. OS60C-DS + 1 Intensiv Ortho-Strips System, medium, Ref. OS40M-DS + 1 Intensiv Ortho-Strips System, fine, Ref. OS25F-DS + 1 Intensiv Ortho-Strips System, polishing, Ref. OS15POL-DS * Contra-Angle without light: Ref. WG-69 A

Calibrated and efficient stripping in Orthodontics Professional procedure with use of mechanical Strips for interproximal enamel reduction (IPR)

Intensiv Swingle, with max. 40.000 rpm (= 20.000 oscillating movements)

ble Availa

April 2

Opening of interdental space

Creating additional space by interproximal enamel reduction (IPR)

Finishing/ Polishing

017

New

Intensiv Swingle, WG-69 LT W&H Synea, with light Contra-Angle, Ref. WG-69 LT * Ejector, Ref. 053 Spray canal cleaner needle, Ref. 054 * Contra-Angle without light: Ref. WG-69 A

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

71

Intensiv Ortho-Strips System, Double-Sided University of Zurich, Switzerland p. 70

Oscillating diamond strips for the bilateral interdental reduction of the tooth size in orthodontics (stripping) When opening the interdental space and reducing, finishing and polishing enamel in orthodontics, care must be taken to avoid grooves and scratches. It is also important to proceed systematically, following a coarse-to-fine sequence in selecting grits. Unlike manual strips, the Intensiv Ortho-Strips System provides rapid, controlled enamel reduction followed by polishing without unnecessary removal of healthy tooth substance.

Product description Flexible strips, double-sided diamond coating 6 different grits: 08 μm, serrated for opening of interdental contact points, 80, 60, 40, 25 and 15μm strips for enamel reduction, contouring, finishing and polishing.

Indications Opening of the interdental contact points Widening of the interdental spaces in orthodontics by bilateral tooth size reduction Elimination of minor crowding and treatment finishing in orthodontics Bilateral proximal enamel polishing

To be used in combination with Intensiv Swingle, WG-69 LT Ortho (with light), pages 70-71

Benefits Efficient opening of the interdental contact points Rapid and controlled enamel reduction* Proximal contouring, finishing and polishing of both adjacent teeth in a single procedure No injuries to patient (lips) or dentist (fingers) (* Intensiv IPR-DistanceControl, pagine 74-75)

Intensiv Ortho-Strips System, One-Sided University of Zurich, Switzerland p. 70

Oscillating diamond strips for the monolateral interdental reduction of the tooth size and the proximal polishing in orthodontics (stripping) When reducing, finishing and polishing enamel in orthodontics (stripping), care must be taken to avoid grooves and scratches. It is also important to proceed systematically, following a coarse-to-fine sequence in selecting grits. Unlike manual strips, the Ortho-Strips One-sided provide rapid, controlled enamel reduction followed by polishing without unnecessary removal of healthy tooth substance and preserving the adjacent teeth.

Product description Flexible strips, one-sided diamond coating.

6 different grits: 08, 80, 60, 40, 25 and 15μm strips for reduction, contouring, finishing and polishing.

Left (“L“) and right (“R“) versions for mesial and distal in the upper and lower jaw.

To be used in combination with Intensiv Swingle, WG-69 LT Ortho (with light), pages 70-71

Indications Opening and enlargement of the interdental spaces in orthodontics without iatrogenic damage to adjacent teeth One-sided proximal contouring, finishing, and polishing Benefits Preservation of healthy tooth substance in the adjacent teeth Rapid and controlled enamel reduction* No injuries to patient (lips) or dentist (fingers)

(* Intensiv IPR-DistanceControl, see pages 74-75)

72

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

tripsTray Ortho-S

p. 41

N ew

1) Opening of the interdental space with OS08OP-DS 2) Contouring with OS40M-DS 3) Controlled finishing with OS25F-DS 4) Polishing with OS15POL-DS 1

2

Clinical pictures: Dr. Francesco Garino, Turin, Italy

3

4

Intensiv Ortho-Strips System, Double-Sided, Ref. 060B Assortment of 4 oscillating strips OS60C-DS, OS40M-DS, OS25F-DS, OS15POL-DS

*

All Intensiv Ortho-Strips Double-Sided are available in packages of 1, 3, 6 or 12 pcs * Intensiv Ortho-Strips System OS08OP-DS instead of Ortho-Strips OS90 tripsTray Ortho-S

p. 41

N ew

1-3) Contouring of a canine mesially with OS40M-L 1

2

3

Clinical pictures: Dr. Francesco Garino, Turin, Italy

Intensiv Ortho-Strips System, One-Sided, Ref. 064 Assortment of 6 oscillating strips OS40M-L, OS25F-L, OS15POL-L, OS40M-R, OS25F-R, OS15POL-R

All Intensiv Ortho-Strips One-Sided, are available in packages of 1, 3, 6 or 12 pcs

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

73

Intensiv ApproxOpener Clinically tested by Dr. Consuelo Damiano, Dr. Valentina Amateis, Milan, Italy

Manual and serrated diamond coated metal strip for opening of tight contact points in Orthodontics Orthodontic treatments which require the reduction of tooth mesial/distal dimensions - so-called stripping the contact points in crooked tooth position are often extremely tight.

An adequate stripping method foresees the opening of the tight contact points.

Product description Diamond coated manual metal strip clamped into a small metal bow; in 2 versions - Serrated and one-sided diamond coating (8μm), thickness approx. 0.09mm.

- Serrated and double-sided diamond coating (8μm), thickness approx. 0.10mm.

Height of strip: 4mm.

Length of strip: 20mm.

Total height of the instrument: 18mm.

Total length of the instrument: 27.5mm.

Stainless steel.

Sterilizable, reusable.

Indications Manual interproximal opening of tight contact points in orthodontic treatments (stripping) Benefits Introduction of the strip between the contact points without friction thanks to the ultra-fine grain and serrated strip border Approximal opening for application of the stripping method Secure strip movement thanks to tension of the strip in the bow

Intensiv IPR-DistanceControl Clinically tested by Dr. Consuelo Damiano, Milan, Italy

Manual stainless steel instrument for the measurement and control of tooth distances created during IPR protocols During orthodontic treatments using the interproximal stripping process, predefined and measured interdental spaces must be created.

With the stripping method, measurable and calibrated spaces are created through the removal of dental tissue in order to obtain exactly the space necessary for the movement of teeth into a harmonious and correct position.

74

Product description Intensiv IPR (InterProximalReduction)DistanceControl is a manual measuring instrument made of stainless steel.

It consists of an eight-part instrument set made of stainless steel with handle (fingergrip).

Thicknesses: 0.10mm, 0.15mm, 0.20mm, 0.25mm, 0.30mm, 0.40mm, 0.50mm, 1.0mm.

The thickness indication is marked on each instrument.

Height of measuring section: 4mm.

Length of measuring section: 40mm.

Total length of the instrument: 50mm.

Removable plastic rivet to secure the 8 instruments.

Sterilizable, reusable.

Indications Measurement and control of the interproximal space after interproximal stripping during orthodontic treatment.

Benefits Durable stainless steel Secure application due to the handle Variable application of the eight instruments, individually or fixed together Precise measurement of distances thanks to the calibrated millimetre scale Large number of measurable distances, thanks to the combination of 8 instruments Easy reading of the gauge dimension

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

Clinical pictures: Dr. Francesco Garino, Turin, Italy 1

2

Serrated, double-sided 8μm diamond coating

Serrated, one-sided 8μm diamond coating

1:1

Ref. AO2018DS/3 Intensiv ApproxOpener Double Sided

Ref. AO2018OS/3 Intensiv ApproxOpener One Sided

Clinical pictures: Dr. Francesco Garino, Turin, Italy 1

Available as set

2

3

4

Each instrument available in package of 3 pcs

1:1

Ref. IPR-DC Set

Ref. Ref. Ref. Ref. Ref. Ref. Ref. Ref.

IPR-DC010/3, IPR-DC015/3, IPR-DC020/3, IPR-DC025/3, IPR-DC030/3, IPR-DC040/3, IPR-DC050/3, IPR-DC100/3,

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

thickness thickness thickness thickness thickness thickness thickness thickness

0.10 0.15 0.20 0.25 0.30 0.40 0.50 1.00

mm mm mm mm mm mm mm mm

75

Intensiv IPR Set

New

Defined with the support of experts in Orthodontics

Calibrated and precise stripping (IPR) in orthodontics Mechanical and manual strips in stainless steel tray Stripping protocols in orthodontics (IPR = interproximal reduction) require a selection of mechanical or manual instruments for the opening of contact points, for enamel reduction and the finishing of proximal surfaces.

The orthodontist needs efficient tools for stripping, which are ergonomically and practically arranged for the treatment of each patient.

Product description Tray in polished stainless steel.

Dimensions: length 190mm, width 100mm, height 25mm.

Compact arrangement of silicone inserts for holding the instruments in place, suitable for easy removal and safe replacement of the instruments in the tray.

Tray contains tools for mechanical and manual stripping in Orthodontics.

Strips and measuring instruments are inserted into two foldable internal supports, which display instrument reference numbers.

Supporting silicone inserts have the same colour code as the grit of the strips and may be replaced if needed.

Tray also available empty.

Indication Application for space creation during stripping procedures (IPR) in Orthodontics Benefits All instruments required for interproximal reduction (IPR) composed together in a tray, placed and ready for use on the patient Indication of the specific grit sizes of the strips, instruments in sequence according to the application protocol (strips, measurement instruments) Simple assignment of strip grits thanks to colour coded silicone inserts Facilitated classifying of instruments in the tray thanks to marked item numbers

Quick access to the necessary instruments required during stripping

Intensiv IPR Set Ref. IPR 6000/WG-69 LT (Intensiv Swingle with light) Ref. IPR 6000/WG-69 A (Intensiv Swingle without light) Ref. IPR 6000 (empty tray)

76

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

New

Contents Intensiv IPR Set:

Mechanical Stripping Ref. WG-69 LT * Intensiv Swingle, reciprocating contra-angle 1 piece (with light) pg. 58/70

Ref. 053 1 piece pg. 58/70

Ref. OS08OP-DS 1 piece pg. 72-73

Ref. OS40M-DS 1 piece pg. 72-73

Ref. OS60C-DS 1 piece pg. 72-73

Intensiv Ortho-Strips, 60μm coarse, for step two in creating additional space

Ref. OS80XC-DS 1 piece pg. 72-73

Ref. OS40M-DS 1 piece pg. 72-73

Intensiv Ortho-Strips, 80μm extracoarse, perforated, for high enamel reduction Intensiv Ortho-Strips, 40μm medium, for pre-polishing of the grinded surfaces

Ref. OS15POL-DS 1 piece pg. 72-73

Intensiv Ejector facilitates Strips removal during the various treatment steps Intensiv Ortho-Strips, 8μm opener, serrated strip edge, for opening of contact points Intensiv Ortho-Strips, 40μm medium, for step one creating additional space

Intensiv Ortho-Strips, 15μm polishing, for fine polishing of treated surfaces

Distance Measurement Instruments Ref. IPR-DC010 IPR-DistanceControl, thickness 0.10 mm Ref. IPR-DC015 IPR-DistanceControl, thickness 0.15 mm Ref. IPR-DC020 IPR-DistanceControl, thickness 0.20 mm Ref. IPR-DC040 IPR-DistanceControl, thickness 0.40 mm Ref. IPR-DC050 IPR-DistanceControl, thickness 0.50 mm 1 piece each manual tools for measuring and monitoring pg. 72-73 interdental spaces Manual Stripping Ref. AO2018OS Intensiv ApproxOpener 8μm ultra-fine, 1 piece one-sided diamond coating, serrated strip edge, pg. 74-75 for opening of contact points Ref. AO2018DS Intensiv ApproxOpener 8μm, ultra-fine, 1 piece double-sided diamond coating, serrated strip edge, pg. 74-75 for opening of contact points Ref. PXCC8040 Intensiv ProxoContour Coarse, perforated, with 2 pieces two grit sizes, 80μm coarse and 40μm fine, pg. 64-65 for efficient, manual space creation Ref. PXPO1508 Intensiv ProxoPolish, with two grit sizes, 2 pieces 15μm extra-fine and 8μm ultra-fine, pg. 64-65 for finishing and polishing of treated surfaces

* Contra-angle without light: Ref. WG-69 A

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

77

Intensiv Perio Set Prof. K.H. Rateitschak, University of Basel, Switzerland

Diamond instruments for odontoplasty and mechanical root planing in periodontal treatments Some important interventions in the treatment of periodontitis include the cleaning and polishing of the root surface. Supragingival and subgingival plaque as well as calculus and superficial endotoxin-containing cementum layers must be thoroughly removed. These are absolute preconditions for the complete healing and regeneration of the periodontal tissue.

Indications Mechanical removal of supragingival and subgingival concretions Periodontal surgery (depuration of exposed root surfaces) Root planing Odontoplasty Benefits Homogeneous smooth root surfaces Better access to difficult areas (furcations, root concavities, deep periodontal pockets)

1

2

3

4

1) RA 740 2) RA 415 3) RA 740 4) RA 515 Ref. 045 12 Diamond instruments assorted All Diamond instruments are available in packages of 1, 3 or 6 pcs

Intensiv Rootshape University of Bern, Switzerland

Oscillating diamond-coated files for tissue-sparing root planing Checking for and removal of soft microbiological plaque, concretions, and filling excesses on the root surface are considered today the essential aspect of the periodontal therapy. The Rootshape files are ideal tools for this type of treatment.

Indications Supragingival and subgingival plaque removal Root planing Odontoplasty Benefits Easy access to difficult areas Superior tactile detection Controlled pressure application

1

2

3

1) Ideal adaptation 2) Treatment in areas with difficult access 3) The shape adapts to the root surface

Intensiv PerioDiaCurette Scientifically proven by the University of Bern, Switzerland

Diamond-coated periodontal curettes for homogeneous, structured root surfaces in periodontal therapy Depuration and polishing of root surfaces remains a central focus of periodontal therapy. Under unfavourable morphological conditions (root grooves, root concavities, furcations), this objective is difficult to achieve by use of standard instruments.

Diamond-coated curettes with their incomparable tactile sensitivity of hand instruments allow for a highly improved treatment in the abovementioned situations.

78

Indication Final root planing in periodontal therapy under unfavourable morphological conditions Benefits The use of hand instruments ensures full tactile sensitivity Particularly suitable in case of concavities and grooves on the root surfaces Complete planing of the root surfaces up to homogeneity

1

2

3

Clinical pictures: Bernita Bush, University of Bern, Switzerland Intensiv PerioDia Curette are available in packages of 1 pcs or in assortment

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

p. 58

Ref. 109 1 pcs of RS40, RS15, RS4, RS40L, RS15L, RS4L All Intensiv Rootshape are available in packages of 1, 3 or 6 pcs To be used in combination with Intensiv Swingle, WG-69 LT (with light)

Clinical Oral Investigations 14 march 2012 Sigrun Eick, Philip Bender, Simon Flury, Adrian Lussi, Anton Sculean, University of Bern ÂŤIn vitro evaluation of surface roughness, adhesion of periodontal ligament fibroblasts, and Streptococcus gordonii following root instrumentation with Gracey curettes and subsequent polishing with diamond-coated curettesÂť

1:1

Ref. PDC-A (Assortment, 4 PerioDiaCurette)

PDC-U

PDC-11/12

PDC-13/14

PDC-F

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

PDC-U

79

Intensiv DiaTweezer Tweezers with diamond-coated tips.

Polished surface Gripping and secure holding of small instruments, pivots, tissue residues or tooth components such as root fragments often represent a challenge to dentists due to slippery conditions.

Diamond-coated tweezer tips with their firm gripping power meet such challenging requirements.

Indications For taking up and transferring metal pivots of any kind, bone and root fragments, workpieces and small instruments as well as tissue residues Internal gripping of crowns, telescopes and other hollow bodies with the fully diamond-coated tips Atraumatic tissue handling in oral surgery Benefits Firm and secure grip through the diamond-coated inner side of the instrument tips Secure hold of small hollow bodies with open tweezers through fully diamond-coated instrument tips

1

2

3

4

College Tweezer: polished and ribbed handles 1) Ref. 1001: diamond-coating all around 2) Ref. 1001A: inside diamondcoating only Meriam Tweezer polished and ribbed handles 3) Ref. 1002: diamond-coating all around 4) Ref. 1002A: inside diamondcoating only

Package content: 1 piece 1:1 College Ref. 1001

1:1 Meriam Ref. 1002

80

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

Intensiv Accessories Intensiv Mandrel Mandrel (carrier of polishing discs) made of stainless steel For the application with polishing discs, a mandrel (type Moore) with a cross-shaped stainless steel head is used as a support for snap on discs.

Product description Stainless steel mandrel with crossshaped head for snap on discs.

Shank type RA. Length: 25mm.

Diameter: 2.6mm.

Sterilizable.

Benefits Rotationally stable, causes no damage to the contra-angle Precise frontal pressure mounted device that holds the polishing disc firmly in the correct position during the treatment

Ref. MRD22/6 Package of 6 pcs

Clinical pictures: Dr. Alessandro Devigus, Bülach, Switzerland

MRD22/6

Intensiv Diakleen For fast cleaning of residue on diamond instruments The rotating diamond instruments keep back remnants of enamel or other material during use. Therefore, they require regular cleaning and removal of these residues.

Instrument cleaning: Contaminated instruments, dried and disinfected, are placed into the turbine and pressed against the front side of the Intensiv Diakleen.

1

2

3

Benefit Fast removal of residues on diamond instruments 4

1) 2) 3) 4)

Ref. ACC060

Intensiv Unigrip Unigrip is a stainless metal reducer with a self-clamping chuck. Unigrip enables the use of FG Instruments in standard right-angle or handpiece.

New Instrument Instrument after use Cleaned Instrument Simple use of Diakleen

Inserting and removing the instrument by turning against the turn of the spiral.

Packages of 6 pcs

/6

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

/6

81

Intensiv Laboratory Program Diamond Instruments First class Swiss Dental-DiamondInstruments of highest quality and precision.

Instruments for use with handpieces.

Please specify HP name before Ref. No.

All forms shown on this page correspond to the actual size.

The bold lines show the diamond coated side of the instrument.

Package content: 1 piece

* Ref. 1116 – also available with diamond coating on the top, Ref. DT1116

* Ref. 1050 – also available with diamond coating on the top, Ref. DT1050 * Ref. 1051 – also available with diamond coating on the top, Ref. DT1051 * Ref. 1052 – also available with diamond coating on the top, Ref. DT1052

82

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

Diamond Instruments Continued

Separation Discs Flexible diamond discs with fine grit diamonds for ceramic and bridges.

All separation discs are available in both mounted and dismounted version.

Package content: 1 piece

Superflex

Very flexible

One-sided

Double-sided

Very flexible

One-sided

Double-sided

Superflex

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

83

Intensiv and ISO Code Index FG

FG

Intensiv Code

ISO Code

FG 01125 FG 01140 FG 01425 FG 01440 FG 01480 FG 101 FG 101 C FG 101 CB FG 101 GB FG 102 FG 102 C FG 102 GB FG 102A C FG 102L FG 102L C FG 102L GB FG 103 FG 103 C FG 103 GB FG 103A C FG 104 FG 104 C FG 104 GB FG 1040 FG 106 FG 106 C FG 106 CB FG 107A FG 107A C FG 108A C FG 109 FG 109 C FG 109 CB FG 109A FG 109A C FG 10A FG 10A C FG 10A GB FG 110 FG 110 C FG 111 FG 111 C FG 111 GB FG 111A FG 111A C FG 113 FG 113 C FG 113 CB FG 113 GB FG 113A FG 113A C FG 113A CB FG 113A GB FG 113N FG 113N C FG 113N CB FG 113N GB FG 113NR FG 113S FG 113S C FG 113S CB FG 113S GB FG 114 FG 114 C FG 114 CB FG 114 GB FG 114A FG 114A C FG 114S FG 114S C FG 115 FG 115 C FG 115 CB FG 115 GB FG 115A FG 115A C FG 116 FG 116 C FG 116 CB FG 116 GB FG 116A FG 116N FG 116N C FG 117 FG 117 C FG 117 CB FG 117 GB FG 117A FG 117A C FG 117N FG 117N C FG 117N GB

314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314

84

150 150 150 150 150 586 586 586 586 313 313 313 041 586 586 586 586 586 586 041 586 586 586 545 171 171 171 171 171 041 171 171 171 171 171 068 068 068 041 041 041 041 041 041 041 171 171 171 171 164 164 164 164 172 172 172 172 546 172 172 172 172 110 110 110 110 110 110 110 110 225 225 225 225 110 110 172 172 172 172 172 172 172 172 172 172 172 164 164 172 172 172

514 514 514 514 524 524 534 544 514 524 534 514 534 524 534 514 524 534 514 534 524 534 514 514 524 534 544 524 534 534 524 534 544 524 534 524 534 514 524 534 524 534 514 524 534 524 534 544 514 524 534 544 514 524 534 544 514 524 524 534 544 514 524 534 544 514 524 534 524 534 524 534 544 514 524 534 524 534 544 514 524 524 534 524 534 544 514 524 534 524 534 514

FG

Shape

Page

Intensiv Code

ISO Code

011 839 011 839 014 839 014 839 014 839 014 898 014 898 015 898 013 898 042 825 042 825 041 825 003 818 016 898 016 898 015 898 018 898 018 898 017 898 005 818 021 898 021 898 020 898 012 846KR 014 846 014 846 015 846 012 846 012 846 007 818 016 846 016 846 017 846 025 846 025 846 034 909 034 909 033 909 050 818 050 818 040 818 040 818 039 818 035 818 035 818 018 846 018 846 019 846 017 846 018 852 018 852 019 852 017 852 023 847 023 847 025 847 022 847 023 847KR 029 847 029 847 030 847 028 847 014 836 014 836 015 836 013 836 016 836 016 836 012 836 012 836 018 807 018 807 019 807 017 807 018 836 018 836 012 847 012 847 013 847 010 847 010 847 014 847 014 847 016 847 016 847 017 847 015 847 014 852 014 852 018 847 018 847 017 847

12 12 12 12 12 31 31 31 31 36 36 36 37 31 31 31 31 31 31 37 31 31 31 23 21 21 21 21 21 37 21 21 21 21 21 36 36 36 35 35 35 35 35 35 35 21 21 21 21 28 28 28 28 22 22 22 22 24 23 23 23 23 13 13 13 13 13 13 13 13 9 9 9 9 13 13 22 22 22 22 22 22 22 22 22 22 22 28 28 22 22 22

FG 117S FG 117S C FG 117S CB FG 117S GB FG 118 FG 119 FG 119 C FG 119A FG 119A C FG 11A FG 11A C FG 11A CB FG 11A GB FG 123 FG 123 C FG 123 GB FG 124 FG 124 C FG 124 CB FG 124 GB FG 124L FG 124L C FG 124L CB FG 124L GB FG 125 FG 125 C FG 130 FG 131 FG 133 FG 134 FG 134 C FG 136 FG 136 C FG 161 FG 161 C FG 161 GB FG 161N FG 161N C FG 162 FG 162 C FG 162 CB FG 162 GB FG 163 FG 163 C FG 163 CB FG 163 GB FG 164 FG 164 C FG 16L FG 16L C FG 17 FG 17L FG 17L C FG 18 FG 18 C FG 18 GB FG 181 FG 181 C FG 181 CB FG 181 GB FG 181N FG 181N C FG 182 FG 182 C FG 182 CB FG 182 GB FG 183 FG 183 C FG 183 GB FG 184 FG 184 C FG 184 CB FG 184 GB FG 185 FG 185 C FG 185 CB FG 185 GB FG 189 FG 18L FG 18L C FG 18L GB FG 19 FG 19 C FG 19 GB FG 190 FG 190 C FG 191 FG 191 C FG 191 CB FG 191 GB FG 192 FG 192 C

314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314

164 164 164 164 225 225 225 225 225 068 068 068 068 210 210 210 129 129 129 129 131 131 131 131 129 129 040 129 129 129 129 129 129 297 297 297 297 297 297 297 297 297 297 297 297 297 297 297 220 220 219 220 220 219 219 219 298 298 298 298 298 298 298 298 298 298 298 298 298 298 298 298 298 298 298 298 298 001 220 220 220 219 219 219 299 299 299 299 299 299 299 299

524 534 544 514 524 524 534 524 534 524 534 544 514 524 534 514 524 534 544 514 524 534 544 514 524 534 524 524 524 524 534 524 534 524 534 514 524 534 524 534 544 514 524 534 544 514 524 534 524 534 524 524 534 524 534 514 524 534 544 514 524 534 524 534 544 514 524 534 514 524 534 544 514 524 534 544 514 524 524 534 514 524 534 514 524 534 524 534 544 514 524 534

016 016 017 015 016 021 021 023 023 039 039 040 038 018 018 017 012 012 013 011 016 016 017 015 014 014 035 008 010 016 016 018 018 012 012 011 014 014 016 016 017 015 018 018 019 017 021 021 012 012 010 014 014 016 016 015 012 012 013 011 014 014 016 016 017 015 018 018 017 021 021 022 020 023 023 024 022 006 016 016 015 012 012 011 012 012 014 014 015 013 016 016

FG

Shape

Page

Intensiv Code

ISO Code

852 852 852 852 807 807 807 807 807 909 909 909 909 886Z 886Z 886Z 885 885 885 885 886 886 886 886 885 885 815 885 885 885 885 885 885 877K 877K 877K 877K 877K 877K 877K 877K 877K 877K 877K 877K 877K 877K 877K 857 857 851 857 857 851 851 851 878K 878K 878K 878K 878K 878K 878K 878K 878K 878K 878K 878K 878K 878K 878K 878K 878K 878K 878K 878K 878K 801 857 857 857 851 851 851 879K 879K 879K 879K 879K 879K 879K 879K

28 28 28 28 9 9 9 9 9 36 36 36 36 26 26 26 17 17 17 17 17 17 17 17 17 17 35 17 17 17 17 17 17 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 28 28 27 28 28 27 27 27 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 8 28 28 28 27 27 27 31 31 31 31 31 31 31 31

FG 192 CB FG 192 GB FG 193 FG 193 C FG 193 CB FG 193 GB FG 194 FG 194 C FG 194 CB FG 195 FG 196 FG 196 C FG 196L FG 197 FG 197 C FG 198 FG 198 C FG 198 CB FG 198 GB FG 198A FG 198A C FG 198A CB FG 199 FG 19A FG 19A GB FG 19L FG 19L C FG 200 FG 200 C FG 200 GB FG 200L FG 200N FG 200N GB FG 200S FG 200S GB FG 201 FG 201 C FG 201 CB FG 201 GB FG 201L FG 201N FG 201N C FG 201N CB FG 201N GB FG 201NL FG 201NL C FG 201S FG 201S C FG 201S CB FG 201S GB FG 202 FG 202 C FG 202 CB FG 202 GB FG 203L FG 203L C FG 204 FG 204 C FG 204 CB FG 204 GB FG 204L FG 204L C FG 205 FG 205 C FG 205 CB FG 205 GB FG 205A FG 205L FG 205L C FG 205L CB FG 205L GB FG 205S FG 205S C FG 206 FG 206 C FG 206 CB FG 206 GB FG 206A FG 207 FG 208 FG 208 C FG 208 CB FG 208 GB FG 210 FG 210 C FG 210 CB FG 210 GB FG 211 FG 211 C FG 211S FG 212 FG 212 C

314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314

299 299 299 299 299 299 299 299 299 299 299 299 697 038 038 038 038 038 038 038 038 038 001 219 219 220 220 001 001 001 697 001 001 001 001 001 001 001 001 697 001 001 001 001 697 697 001 001 001 001 010 010 010 010 697 697 109 109 109 109 697 697 247 247 247 247 170 248 248 248 248 247 247 170 170 170 170 170 225 170 170 170 170 109 109 109 109 109 109 109 109 109

544 514 524 534 544 514 524 534 544 524 524 534 524 524 534 524 534 544 514 524 534 544 524 524 514 524 534 524 534 514 524 524 514 524 514 524 534 544 514 524 524 534 544 514 524 534 524 534 544 514 524 534 544 514 524 534 524 534 544 514 524 534 524 534 544 514 524 524 534 544 514 524 534 524 534 544 514 524 524 524 534 544 514 524 534 544 514 524 534 524 524 534

017 015 018 018 019 017 020 020 021 021 023 023 014 037 037 029 029 030 028 033 033 034 007 017 016 017 017 012 012 012 012 010 010 009 008 018 018 019 018 018 016 016 017 016 016 016 014 014 015 014 016 016 017 015 016 016 014 014 015 013 023 023 014 014 015 013 010 012 012 013 011 012 012 012 012 013 011 009 010 014 014 015 013 010 010 011 009 010 010 008 009 009

Shape

Page

Intensiv Code

ISO Code

879K 879K 879K 879K 879K 879K 879K 879K 879K 879K 879K 879K 801L 811 811 811 811 811 811 811 811 811 801 851 851 857 857 801 801 801 801L 801 801 801 801 801 801 801 801 801L 801 801 801 801 801L 801L 801 801 801 801 805 805 805 805 801L 801L 835 835 835 835 801L 801L 860 860 860 860 845 861 861 861 861 860 860 845 845 845 845 845 807 845 845 845 845 835 835 835 835 835 835 835 835 835

31 31 31 31 31 31 31 31 31 31 31 31 9 35 35 35 35 35 35 35 35 35 8 27 27 28 28 8 8 8 9 8 8 8 8 8 8 8 8 9 8 8 8 8 9 9 8 8 8 8 10 10 10 10 9 9 13 13 13 13 9 9 19 19 19 19 22 19 19 19 19 19 19 22 22 22 22 22 9 22 22 22 22 13 13 13 13 13 13 13 13 13

FG 212 CB FG 212 GB FG 212S FG 212S CB FG 212S GB FG 213 FG 213 C FG 213 CB FG 213 GB FG 214 FG 214 C FG 214 CB FG 214 GB FG 215 FG 215 C FG 215 GB FG 215S FG 215S C FG 215S GB FG 216 FG 216 C FG 216 GB FG 216A FG 216B FG 216N FG 216N C FG 216N GB FG 216S FG 216S C FG 216S GB FG 217 FG 217 C FG 217 GB FG 217B FG 217S FG 217S C FG 217S GB FG 218 FG 218 C FG 218 CB FG 218 GB FG 218B FG 219 FG 219 C FG 219 CB FG 219 GB FG 219B FG 219N FG 219N C FG 219N CB FG 220 FG 220 C FG 220 CB FG 220 GB FG 220B FG 220S FG 220S C FG 221B FG 223 FG 223 C FG 223 CB FG 223 GB FG 223B FG 224 FG 224 C FG 224 GB FG 225 FG 225 C FG 225 CB FG 225 GB FG 226 FG 226 C FG 227 FG 227 C FG 227 CB FG 228 FG 228 C FG 229 FG 229 C FG 230 FG 230 C FG 231 FG 232 FG 233 FG 233 C FG 233 CB FG 233 GB FG 234 FG 234 C FG 234 CB FG 234 GB FG 235

314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

109 109 109 109 109 171 171 171 171 109 109 109 109 225 225 225 225 225 225 010 010 010 010 235 010 010 010 010 010 010 010 010 010 235 010 010 010 237 237 237 237 235 237 237 237 237 235 237 237 237 237 237 237 237 235 237 237 235 238 238 238 238 236 238 238 238 238 238 238 238 238 238 238 238 238 170 170 236 236 236 236 199 199 199 199 199 199 199 199 199 199 198

544 514 524 544 514 524 534 544 514 524 534 544 514 524 534 514 524 534 514 524 534 514 524 524 524 534 514 524 534 514 524 534 514 524 524 534 514 524 534 544 514 524 524 534 544 514 524 524 534 544 524 534 544 514 524 524 534 524 524 534 544 514 524 524 534 514 524 534 544 514 524 534 524 534 544 524 534 524 534 524 534 524 524 524 534 544 514 524 534 544 514 524

010 008 009 010 008 018 018 019 017 012 012 013 011 014 014 013 012 012 011 012 012 011 007 008 009 009 008 008 008 007 014 014 013 009 010 010 009 010 010 011 009 010 012 012 013 011 012 014 014 015 018 018 020 017 014 016 016 016 014 014 015 013 015 010 010 009 012 012 013 011 016 016 018 018 019 016 016 016 016 018 018 014 010 012 012 013 011 016 016 017 015 018

Shape

Page

835 835 835 835 835 846 846 846 846 835 835 835 835 807 807 807 807 807 807 805 805 805 805 830 805 805 805 805 805 805 805 805 805 830 805 805 805 830R 830R 830R 830R 830 830R 830R 830R 830R 830 830R 830R 830R 830R 830R 830R 830R 830 830R 830R 830 830RL 830RL 830RL 830RL 830L 830RL 830RL 830RL 830RL 830RL 830RL 830RL 830RL 830RL 830RL 830RL 830RL 845 845 830L 830L 830L 830L 850 850 850 850 850 850 850 850 850 850 856

13 13 13 13 13 21 21 21 21 13 13 13 13 9 9 9 9 9 9 10 10 10 10 11 10 10 10 10 10 10 10 10 10 11 10 10 10 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 22 22 12 12 12 12 26 26 26 26 26 26 26 26 26 26 26

FG

FG

Intensiv Code

ISO Code

FG 235 C FG 235 CB FG 235 GB FG 235A FG 235A C FG 235S FG 235S C FG 235S CB FG 236 FG 236 C FG 236 CB FG 236 GB FG 237 FG 237 C FG 237 CB FG 237 GB FG 237L FG 237L C FG 238 FG 238 C FG 238 CB FG 238 GB FG 238L FG 238L C FG 239L FG 239L C FG 240 FG 240 C FG 240 CB FG 240 GB FG 240L FG 240L C FG 241 FG 241 C FG 241 CB FG 241 GB FG 243 FG 243 C FG 243 GB FG 244 FG 244 C FG 244 CB FG 244A FG 244A C FG 245 FG 245 C FG 245 GB FG 246 FG 246 C FG 247 FG 247 C FG 247 GB FG 248 FG 248 C FG 249 FG 249 C FG 250 FG 250 C FG 250 CB FG 250 GB FG 250A FG 250A C FG 250A GB FG 252 FG 252A FG 253 FG 253 C FG 254 FG 254 C FG 254 GB FG 255 FG 255 C FG 255 CB FG 255 GB FG 255A FG 255A C FG 255A GB FG 256 FG 256 C FG 256 GB FG 257 FG 257 C FG 257 CB FG 257 GB FG 257S FG 257S C FG 257S GB FG 258 FG 258 C FG 258 CB FG 258 GB FG 258N

314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314

198 198 198 198 198 198 198 198 199 199 199 199 199 199 199 199 198 198 199 199 199 199 198 198 198 198 199 199 199 199 198 198 039 039 039 039 033 033 033 109 109 109 109 109 033 033 033 199 199 199 199 199 199 199 199 199 277 277 277 277 277 277 277 257 257 257 257 257 257 257 257 257 257 257 257 257 257 277 277 277 277 277 277 277 277 277 277 277 277 277 277 277

534 544 514 524 534 524 534 544 524 534 544 514 524 534 544 514 524 534 524 534 544 514 524 534 524 534 524 534 544 514 524 534 524 534 544 514 524 534 514 524 534 544 524 534 524 534 514 524 534 524 534 514 524 534 524 534 524 534 544 514 524 534 514 524 524 524 534 524 534 514 524 534 544 514 524 534 514 524 534 514 524 534 544 514 524 534 514 524 534 544 514 524

018 019 017 021 021 025 025 026 018 018 019 017 022 022 023 021 014 014 026 026 027 025 016 016 018 018 023 023 024 022 020 020 037 037 038 036 021 021 020 016 016 017 018 018 027 027 026 012 012 014 014 012 016 016 018 018 023 023 024 022 017 017 016 016 010 014 014 012 012 011 023 023 024 022 018 018 017 012 012 011 018 018 019 017 014 014 013 023 023 024 022 029

FG

Shape

Page

Intensiv Code

ISO Code

856 856 856 856 856 856 856 856 850 850 850 850 850 850 850 850 856L 856L 850 850 850 850 856L 856L 856L 856L 850L 850L 850L 850L 856L 856L 811L 811L 811L 811L 899 899 899 835 835 835 835 835 899 899 899 850L 850L 850L 850L 850L 850L 850L 850L 850L 379 379 379 379 379 379 379 368 368 368 368 368 368 368 368 368 368 368 368 368 368 379 379 379 379 379 379 379 379 379 379 379 379 379 379 379

26 26 26 26 26 26 26 26 27 27 27 27 27 27 27 27 25 25 27 27 27 27 25 25 25 25 27 27 27 27 25 25 35 35 35 35 34 34 34 13 13 13 13 13 34 34 34 27 27 27 27 27 27 27 27 27 34 34 34 34 34 34 34 32 32 32 32 32 32 32 32 32 32 32 32 32 32 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33

FG 258N C FG 258N GB FG 259 FG 259 C FG 259 CB FG 259 GB FG 260 FG 260 C FG 261 FG 262 FG 263 FG 263 C FG 264 FG 264 C FG 265 FG 265 C FG 266 FG 266 C FG 268 FG 268 C FG 269 FG 269 C FG 274 FG 274 C FG 274 GB FG 274N FG 274N C FG 274N GB FG 285L FG 285L C FG 285L CB FG 297 FG 298 FG 298 C FG 299 FG 299 C FG 300 FG 300 C FG 300 GB FG 300A FG 300S FG 300S C FG 300S GB FG 301 FG 301 C FG 301 CB FG 301A FG 301A C FG 301S FG 301S C FG 301S GB FG 302 FG 302 C FG 302 CB FG 302 GB FG 302A FG 302A C FG 303 FG 303 C FG 303 CB FG 303A FG 303A C FG 303S FG 303S C FG 304 FG 304 C FG 304 CB FG 304 GB FG 3040B FG 3040SB FG 305 FG 305 C FG 305 CB FG 305 GB FG 305L FG 305L C FG 305L CB FG 305L GB FG 305LP C FG 305S FG 305S C FG 305S CB FG 305S GB FG 306 FG 306 C FG 306 GB FG 306A FG 306S FG 306S C FG 306S GB FG 307 FG 307 C

314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314

277 277 277 277 277 277 277 277 156 156 156 156 156 156 156 156 156 156 277 277 247 247 274 274 274 274 274 274 248 248 248 032 032 032 032 032 002 002 002 002 002 002 002 002 002 002 002 002 002 002 002 019 019 019 019 002 002 032 032 032 032 032 032 032 109 109 109 109 290 290 140 140 140 140 142 142 142 142 158 140 140 140 140 288 288 288 288 287 287 287 141 141

534 514 524 534 544 514 524 534 524 524 524 534 524 534 524 534 524 534 524 534 524 534 524 534 514 524 534 514 524 534 544 524 524 534 524 534 524 534 514 524 524 534 514 524 534 544 524 534 524 534 514 524 534 544 514 524 534 524 534 544 524 534 524 534 524 534 544 514 514 514 524 534 544 514 524 534 544 514 534 524 534 544 514 524 534 514 524 524 534 514 524 534

029 028 033 033 034 032 016 016 008 010 012 012 014 014 016 016 018 018 016 016 016 016 016 016 015 021 021 020 014 014 015 010 012 012 014 014 012 012 011 010 009 009 009 018 018 020 016 016 014 014 013 018 018 019 017 023 023 020 020 021 018 018 016 016 022 022 023 021 014 010 012 012 013 011 012 012 013 011 013 010 010 011 009 010 010 009 009 009 009 008 016 016

FG

Shape

Page

Intensiv Code

ISO Code

379 379 379 379 379 379 379 379 835KR 835KR 835KR 835KR 835KR 835KR 835KR 835KR 835KR 835KR 379 379 860 860 390 390 390 390 390 390 861 861 861 813 813 813 813 813 802 802 802 802 802 802 802 802 802 802 802 802 802 802 802 806 806 806 806 802 802 813 813 813 813 813 813 813 835 835 835 835 879 879 880 880 880 880 882 882 882 882 837KR 880 880 880 880 877 877 877 877 876 876 876 881 881

33 33 33 33 33 33 33 33 12 12 12 12 12 12 12 12 12 12 33 33 19 19 34 34 34 34 34 34 19 19 19 10 10 10 10 10 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 10 10 10 10 9 9 10 10 10 10 10 10 10 13 13 13 13 18 18 15 15 15 15 16 16 16 16 14 15 15 15 15 18 18 18 18 18 18 18 16 16

FG 307 CB FG 307 GB FG 307A FG 307A C FG 307L FG 307L C FG 307L CB FG 307L GB FG 307N FG 307N C FG 307N CB FG 307N GB FG 308 FG 308 C FG 308 CB FG 308 GB FG 308S FG 308S C FG 308S GB FG 309 FG 309 CB FG 309 CB FG 309 GB FG 30D14 FG 30D2 FG 30D3 FG 30D34 FG 30D4 FG 30D6 FG 30D8 FG 310 FG 310 C FG 310 CB FG 310 GB FG 311 FG 311 C FG 311 CB FG 311 GB FG 3113NR FG 3113R FG 3113S FG 3116 FG 3117 FG 3117N FG 311S FG 311S C FG 312 FG 312 C FG 312 CB FG 312 GB FG 3124L FG 312L FG 312N FG 312N C FG 312N CB FG 312N GB FG 313 FG 313 C FG 313A FG 313A C FG 313L FG 313L C FG 314 FG 314 C FG 314 CB FG 314 GB FG 314A FG 314L FG 314L C FG 314L CB FG 314L GB FG 314S FG 314S C FG 314S CB FG 314S GB FG 315 FG 315 C FG 315 CB FG 315 GB FG 315A FG 315A C FG 315L FG 315L C FG 315L CB FG 315L GB FG 315S FG 315S C FG 315S CB FG 315S GB FG 316 FG 316 C FG 316 GB

314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314

141 141 142 142 142 142 142 142 142 142 142 142 289 289 289 289 289 289 289 141 141 141 141 165 165 167 166 166 199 197 290 290 290 290 249 249 249 249 546 545 172 172 172 172 249 249 249 249 249 249 131 112 250 250 250 250 170 170 111 111 112 112 111 111 111 111 111 112 112 112 112 111 111 111 111 141 141 141 141 111 111 141 141 141 141 141 141 141 141 019 019 019

544 514 524 534 524 534 544 514 524 534 544 514 524 534 544 514 524 534 514 524 534 544 514 514 514 514 514 514 514 514 524 534 544 514 524 534 544 514 514 514 514 514 514 514 524 534 524 534 544 514 514 524 524 534 544 514 524 534 524 534 524 534 524 534 544 514 524 524 534 544 514 524 534 544 514 524 534 544 514 524 534 524 534 544 514 524 534 544 514 524 534 514

Shape

Page

Intensiv Code

ISO Code

017 881 015 881 011 882 011 882 016 882 016 882 017 882 015 882 014 882 014 882 015 882 013 882 012 878 012 878 013 878 011 878 010 878 010 878 009 878 010 881 010 881 011 881 009 881 012 858 010 858 011 859 013 859 014 859 014 850 014 855 012 879 012 879 013 879 011 879 016 862 016 862 017 862 015 862 021 847KR 017 846KR 027 847 010 847 014 847 015 847 014 862 014 862 018 862 018 862 019 862 017 862 014 886 010 837L 018 863 018 863 019 863 017 863 018 845 018 845 018 837 018 837 012 837L 012 837L 014 837 014 837 015 837 013 837 010 837 016 837L 016 837L 017 837L 015 837L 012 837 012 837 013 837 011 837 020 881 020 881 021 881 019 881 016 837 016 837 020 881 020 881 021 881 019 881 014 881 014 881 015 881 013 881 012 806 012 806 011 806

16 16 16 16 16 16 16 16 16 16 16 16 17 17 17 17 17 17 17 16 16 16 16 29 29 29 29 29 26 25 18 18 18 18 20 20 20 20 24 23 23 22 22 22 20 20 20 20 20 20 17 14 20 20 20 20 22 22 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 16 16 16 16 14 14 16 16 16 16 16 16 16 16 10 10 10

FG 316L FG 316L C FG 316N FG 316N C FG 316N GB FG 316S FG 316S C FG 316S GB FG 317L FG 317L C FG 317L CB FG 317L GB FG 3200 FG 3200S FG 3201 FG 3205 FG 3205L FG 3206 FG 321 FG 321 C FG 3210 FG 3211S FG 3212S FG 3214 FG 3218 FG 3219 FG 322 FG 322 C FG 3223 FG 3224 FG 3225 FG 3233 FG 3235 FG 3236 FG 3237 FG 324 FG 324 C FG 3240 FG 3243 FG 325 FG 325 C FG 325 CB FG 325 GB FG 3250 FG 3255 FG 3256 FG 3257 FG 3258 FG 3259 FG 326 FG 326 C FG 327 FG 327 C FG 3274 FG 3274N FG 3305 FG 3305L FG 3308 FG 3310 FG 3311 FG 3313 FG 3315L FG 3315S FG 3323 FG 334 FG 334 C FG 335 FG 336 FG 336 C FG 3388 FG 340 FG 3400 FG 3400N FG 3400S FG 3401 FG 3404 FG 3405L FG 3408 FG 3409R FG 341 FG 3410 FG 3413 FG 3413R FG 3414 FG 3414B FG 342 FG 3422 FG 3425 FG 3427 FG 343 FG 343 C FG 3510

314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

112 112 019 019 019 019 019 019 112 112 112 112 001 001 001 247 248 170 141 141 109 109 109 109 235 235 141 141 236 236 236 199 198 199 199 141 141 199 033 141 141 141 141 277 257 277 277 277 277 158 158 158 158 274 274 140 142 289 290 249 170 141 141 236 140 140 465 140 140 289 232 001 001 001 001 139 250 289 544 232 290 170 544 157 157 232 546 545 546 232 232 157

524 534 524 534 514 524 534 514 524 534 544 514 514 514 514 514 514 514 524 534 514 514 514 514 514 514 524 534 504 504 504 514 514 514 514 524 534 514 514 524 534 544 514 514 514 514 514 514 514 524 534 524 534 514 514 514 514 514 514 514 514 514 514 504 524 534 524 524 534 514 524 514 514 514 514 514 514 514 514 524 514 514 514 514 514 524 514 514 514 524 534 514

014 014 009 009 008 008 008 007 018 018 019 017 010 007 016 012 010 010 012 012 008 007 007 010 008 010 012 012 013 009 010 010 016 016 020 014 014 021 019 018 018 019 017 021 021 010 016 021 031 016 016 018 018 014 019 010 010 010 010 014 016 018 012 014 014 014 018 016 016 012 008 025 023 021 033 013 010 014 016 009 012 022 021 011 011 010 014 013 012 012 012 009

Shape

Page

837L 837L 806 806 806 806 806 806 837L 837L 837L 837L 801 801 801 860 861 845 881 881 835 835 835 835 830 830 881 881 830L 830L 830L 850 856 850 850 881 881 850L 899 881 881 881 881 379 368 379 379 379 379 837KR 837KR 837KR 837KR 390 390 880 882 878 879 862 845 881 881 830L 880 880 392 880 880 878 822 801 801 801 801 838 863 878 845KR 822 879 845 845KR 836KR 836KR 822 847KR 846KR 847KR 822 822 836KR

14 14 10 10 10 10 10 10 14 14 14 14 8 8 8 19 19 22 16 16 13 13 13 13 11 11 16 16 12 12 12 26 26 26 27 16 16 27 34 16 16 16 16 34 32 33 33 33 33 14 14 14 14 34 34 15 16 17 18 20 22 16 16 12 15 15 36 15 15 17 11 8 8 8 8 15 20 17 23 11 18 22 23 15 15 11 24 23 24 11 11 15

85

Intensiv and ISO Code Index Continuation

FG

FG

Intensiv Code

ISO Code

FG 3513 FG 3513N FG 3514 FG 3517 FG 3525 FG 3526 FG 360 FG 360 C FG 361 FG 361 C FG 3614 FG 3614B FG 363 FG 364 FG 364 C FG 365 FG 365 C FG 366 FG 366 C FG 366 CB FG 366 GB FG 367 FG 367 C FG 370 FG 370 C FG 3710B FG 3712B FG 3714B FG 378 FG 378 C FG 388 FG 388 C FG 388 CB FG 388 GB FG 397 FG 398 FG 399 FG 399 C FG 400 FG 400 C FG 400 CB FG 400 GB FG 400A FG 400A C FG 400B FG 400B C FG 400N FG 400N C FG 400N CB FG 400N GB FG 400S FG 400S C FG 400S CB FG 400S GB FG 401 FG 401 C FG 401 CB FG 401 GB FG 4011A FG 402 FG 402 C FG 402 CB FG 402 GB FG 4035 FG 4036 FG 4037 FG 4038 FG 404 FG 404 C FG 404 CB FG 404 GB FG 4040B FG 404L FG 405L FG 405L C FG 405L GB FG 406 FG 406 C FG 406 GB FG 4062 FG 407R FG 407R C FG 407R GB FG 408 FG 408 C FG 408 CB FG 408 GB FG 409R FG 409R C FG 409R GB FG 40D1 FG 40D14

314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314

86

545 546 157 546 545 158 165 165 165 165 158 158 249 249 249 249 249 288 288 288 288 249 249 263 263 156 158 156 250 250 289 289 289 289 157 157 157 157 001 001 001 001 001 001 001 001 001 001 001 001 001 001 001 001 001 001 001 001 068 010 010 010 010 466 111 290 142 139 139 139 139 290 250 250 250 250 288 288 288 297 544 544 544 289 289 289 289 544 544 544 699 165

514 514 514 514 514 524 524 534 524 534 514 514 524 524 534 524 534 524 534 544 514 524 534 524 534 514 514 514 524 534 524 534 544 514 524 524 524 534 524 534 544 514 524 534 524 534 524 534 544 514 524 534 544 514 524 534 544 514 514 524 534 544 514 514 514 514 514 524 534 544 514 514 524 524 534 514 524 534 514 514 524 534 514 524 534 544 514 524 534 514 514 514

016 022 011 016 016 016 016 016 018 018 012 014 009 010 010 012 012 012 012 013 011 021 021 025 025 010 009 014 021 021 014 014 015 013 008 010 012 012 027 027 028 026 021 021 029 029 025 025 026 024 023 023 024 022 036 036 037 034 038 018 018 019 017 015 010 011 011 014 014 015 013 014 010 012 012 011 014 014 013 014 016 016 015 016 016 017 015 018 018 017 009 013

FG

Shape

Page

Intensiv Code

ISO Code

846KR 847KR 836KR 847KR 846KR 847KR 858 858 858 858 837KR 837KR 862 862 862 862 862 877 877 877 877 862 862 369 369 836KR 837KR 836KR 863 863 878 878 878 878 836KR 836KR 836KR 836KR 801 801 801 801 801 801 801 801 801 801 801 801 801 801 801 801 801 801 801 801 909 805 805 805 805 833 837 879 882 838 838 838 838 879 863 863 863 863 877 877 877 877K 845KR 845KR 845KR 878 878 878 878 845KR 845KR 845KR 956 858

23 24 15 24 23 24 29 29 29 29 14 14 20 20 20 20 20 18 18 18 18 20 20 33 33 15 14 15 20 20 17 17 17 17 15 15 15 15 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 36 10 10 10 10 36 14 18 16 15 15 15 15 18 20 20 20 20 18 18 18 30 23 23 23 17 17 17 17 23 23 23 28 29

FG 40D16 FG 40D17 FG 40D18 FG 40D2 FG 40D21 FG 40D25 FG 40D26 FG 40D3 FG 40D34 FG 40D4 FG 40D5 FG 40D6 FG 40D7 FG 40D8 FG 40D9 FG 410 FG 410 C FG 410 CB FG 410 GB FG 4101 FG 4102L FG 4103 FG 410L FG 410L C FG 410L CB FG 410L GB FG 411 FG 4113 FG 4113NR FG 4113S FG 4114 FG 4117 FG 4117A FG 4117N FG 4117S FG 411A FG 411A C FG 411R FG 411R C FG 411R GB FG 412 FG 412 C FG 412 GB FG 4123 FG 4124L FG 412A FG 413 FG 413 C FG 413 CB FG 413 GB FG 4132 FG 4135 FG 413R FG 413R C FG 413R GB FG 414 FG 414 C FG 416 FG 416 C FG 416 CB FG 416 GB FG 4161 FG 4161N FG 4162 FG 4163 FG 417R FG 417R C FG 4181 FG 4181N FG 4182 FG 4184 FG 4185 FG 4192 FG 4193 FG 4194 FG 4195 FG 4198 FG 4199 FG 420 FG 420 C FG 4200 FG 4200S FG 4201 FG 4201NL FG 4201S FG 4204 FG 4205 FG 4205L FG 4206 FG 421 FG 4210 FG 4211S

314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314

197 197 198 165 213 198 198 167 166 166 173 199 197 197 699 290 290 290 290 586 586 586 291 291 291 291 139 171 546 172 110 172 164 172 164 139 139 544 544 544 139 139 139 210 131 139 170 170 170 170 466 466 544 544 544 157 157 010 010 010 010 297 297 297 297 545 545 298 298 298 298 298 299 299 299 299 038 001 157 157 001 001 001 697 001 109 247 248 170 157 109 109

514 514 514 514 514 514 514 514 514 514 514 514 514 514 514 524 534 544 514 514 514 514 524 534 544 514 524 514 514 514 514 514 514 514 514 524 534 524 534 514 524 534 514 514 514 524 524 534 544 514 514 514 524 534 514 524 534 524 534 544 514 514 514 514 514 524 534 514 514 514 514 514 514 514 514 514 514 514 524 534 514 514 514 514 514 514 514 514 514 524 514 514

011 013 015 011 022 010 013 011 013 015 014 015 023 015 009 014 014 015 013 013 015 017 015 015 016 014 010 017 022 028 013 015 013 017 015 012 012 021 021 020 009 009 008 017 015 008 024 024 025 023 033 013 023 023 022 014 014 023 023 024 022 011 013 015 017 016 016 011 013 015 020 022 015 017 019 020 028 007 016 016 011 008 017 015 013 013 013 011 011 018 009 007

FG

Shape

Page

Intensiv Code

ISO Code

855 855 856 858 888 856 856 859 859 859 848 850 855 855 955 879 879 879 879 898 898 898 879L 879L 879L 879L 838 846 847KR 847 836 847 852 847 852 838 838 845KR 845KR 845KR 838 838 838 886Z 886 838 845 845 845 845 833 833 845KR 845KR 845KR 836KR 836KR 805 805 805 805 877K 877K 877K 877K 846KR 846KR 878K 878K 878K 878K 878K 879K 879K 879K 879K 811 801 836KR 836KR 801 801 801 801L 801 835 860 861 845 836KR 835 835

25 25 26 29 20 26 26 29 29 29 21 26 25 25 28 18 18 18 18 31 31 31 18 18 18 18 15 21 24 23 13 22 28 22 28 15 15 23 23 23 15 15 15 26 17 15 22 22 22 22 36 36 23 23 23 15 15 10 10 10 10 30 30 30 30 23 23 30 30 30 30 30 31 31 31 31 35 8 15 15 8 8 8 9 8 13 19 19 22 15 13 13

FG 4212 FG 4212S FG 4213 FG 4214 FG 4218 FG 4219 FG 4223R FG 4224 FG 4225 FG 4228 FG 422R FG 422R C FG 422R CB FG 4233 FG 4235 FG 4235A FG 4235S FG 4236 FG 4237 FG 4238 FG 4238L FG 423R FG 423R C FG 423R CB FG 423R GB FG 4240 FG 4241 FG 4243 FG 4245 FG 4249 FG 4250 FG 4250B FG 4253 FG 4254 FG 4255 FG 4255A FG 4256 FG 4257 FG 4258 FG 4258A FG 4259 FG 425 CB FG 426 FG 4274 FG 4274N FG 428 FG 428 C FG 4300 FG 4300S FG 4304 FG 4305 FG 4305L FG 4305LP FG 4305S FG 4306 FG 4307 FG 4307L FG 4307N FG 4308 FG 4308S FG 4310 FG 4310B FG 4310S FG 4311 FG 4311S FG 4312N FG 4313 FG 4314 FG 4314L FG 4314S FG 4315 FG 4315L FG 4315S FG 4322 FG 4323 FG 4325 FG 4325L FG 4335 FG 4365 FG 4370 FG 4388 FG 4400 FG 4400N FG 4400S FG 4401 FG 4405L FG 4406 FG 4406B FG 4407R FG 4408 FG 4409R FG 4410

314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314

109 109 171 109 235 235 236 238 238 170 546 546 546 199 198 198 198 199 199 199 198 553 553 553 553 199 039 033 033 199 277 277 257 257 257 257 277 277 277 277 277 545 540 274 274 540 540 002 002 109 140 142 158 140 288 141 142 142 289 289 290 290 536 249 249 250 170 111 112 111 141 141 141 141 236 141 158 465 249 263 289 001 001 001 001 250 288 288 544 289 544 290

514 514 514 514 514 514 514 514 514 514 524 534 544 514 514 514 514 514 514 514 514 524 534 544 514 514 514 514 514 514 514 514 514 514 514 514 514 514 514 514 514 544 524 514 514 524 534 514 514 514 514 514 514 514 514 514 514 514 514 514 514 514 514 514 514 514 514 514 514 514 514 514 514 514 514 514 514 514 514 514 514 514 514 514 514 514 514 514 514 514 514 514

008 008 017 011 009 011 014 009 011 015 016 016 016 011 016 019 023 016 021 025 014 018 018 019 017 022 036 020 026 014 022 022 013 011 022 017 011 017 022 023 032 015 010 015 020 012 012 010 008 021 011 011 012 009 009 015 015 013 011 009 011 013 011 015 013 017 017 013 014 011 019 019 013 011 015 017 014 015 011 023 013 026 024 022 034 011 013 013 015 015 017 012

Shape

Page

835 835 846 835 830 830 830L 830RL 830RL 845 847KR 847KR 847KR 850 856 856 856 850 850 850 856L 848KR 848KR 848KR 848KR 850L 811L 899 899 850L 379 379 368 368 368 368 379 379 379 379 379 846KR 889 390 390 889 889 802 802 835 880 882 837KR 880 877 881 882 882 878 878 879 879 874 862 862 863 845 837 837L 837 881 881 881 881 830L 881 837KR 392 862 369 878 801 801 801 801 863 877 877 845KR 878 845KR 879

13 37 21 13 11 11 12 12 12 22 24 24 24 26 26 26 26 26 27 26 25 24 24 24 24 27 35 34 34 27 34 34 32 32 32 32 33 33 33 33 33 23 37 34 34 37 37 9 9 13 15 16 14 15 18 16 16 16 17 17 18 18 37 20 20 20 22 14 14 14 16 16 16 16 12 16 14 36 20 33 17 8 8 8 8 20 18 18 23 17 23 18

Intensiv Code

ISO Code

FG 4410L FG 4413R FG 4414 FG 4414B FG 4417R FG 4422R FG 4426 FG 4427 FG 4505 FG 4505L FG 451 Rapido FG 4517 FG 4520 FG 4526 FG 4610 FG 4612 FG 4614 FG 4614B FG 466 FG 466 C FG 466 CB FG 467 FG 467 C FG 468 FG 469 FG 4699 FG 470 FG 470 C FG 471 FG 471 C FG 472 FG 472 C FG 473L FG 473L C FG 474L FG 474L C FG 480 FG 480 C FG 481 FG 482 FG 482 C FG 483 FG 483 C FG 484 FG 484 C FG 485 FG 485 C FG 486 FG 5011A FG 505 FG 505 C FG 505 GB FG 505L FG 505L C FG 505L GB FG 5062 FG 50D14 FG 50D16 FG 50D18 FG 50D2 FG 50D3 FG 50D34 FG 50D4 FG 50D5 FG 50D6 FG 50D7 FG 50D8 FG 50D9 FG 5102L FG 5113A FG 5116N FG 5117 FG 5117S FG 513 FG 513 C FG 517 FG 517 C FG 5181 FG 5182 FG 5195 FG 520 FG 5201 FG 5201S FG 5205 FG 5205L FG 5206 FG 5214 FG 5218 FG 5219 FG 5223 FG 5225 FG 5234

314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

291 544 157 157 545 546 540 546 250 250 173 546 172 546 068 109 158 158 288 288 288 288 288 289 289 697 289 289 290 290 290 290 291 291 291 291 150 150 196 196 196 196 196 196 196 196 196 196 068 250 250 250 250 250 250 297 165 197 198 165 167 166 166 173 199 197 197 699 586 164 172 172 164 545 545 546 546 298 298 299 172 001 001 247 248 170 109 235 235 236 238 199

514 514 514 514 514 514 514 514 514 514 524 514 514 514 514 514 514 514 524 534 544 524 534 524 524 514 524 534 524 534 524 534 524 534 524 534 524 534 524 524 534 524 534 524 534 524 534 524 514 524 534 514 524 534 514 504 504 504 504 504 504 504 504 504 504 504 504 504 504 504 504 504 504 524 534 524 534 504 504 504 524 504 504 504 504 504 504 504 504 504 504 504

013 022 012 012 015 016 009 013 013 015 020 016 018 017 015 007 013 014 016 016 017 018 018 008 009 007 018 018 016 016 018 018 012 012 014 014 016 016 010 012 012 014 014 016 016 025 025 009 037 014 014 013 016 016 015 013 012 010 014 010 011 012 014 013 014 022 014 008 014 015 012 014 014 018 018 016 016 010 014 019 020 016 012 012 010 010 010 008 010 013 010 013

Shape

Page

879L 845KR 836KR 836KR 846KR 847KR 889 847KR 863 863 848 847KR 847 847KR 909 835 837KR 837KR 877 877 877 877 877 878 878 801L 878 878 879 879 879 879 879L 879L 879L 879L 839 839 849 849 849 849 849 849 849 849 849 849 909 863 863 863 863 863 863 877K 858 855 856 858 859 859 859 848 850 855 855 955 898 852 847 847 852 846KR 846KR 847KR 847KR 878K 878K 879K 847 801 801 860 861 845 835 830 830 830L 830RL 850

18 23 15 15 23 24 37 24 20 20 37 24 22 24 36 13 14 14 18 18 18 18 18 17 17 9 17 17 18 18 18 18 18 18 18 18 12 12 24 24 24 24 24 24 24 24 24 24 36 20 20 20 20 20 20 30 29 25 26 29 29 29 29 21 26 25 25 28 31 28 22 22 28 23 23 24 24 30 30 31 22 8 8 19 19 22 13 11 11 12 12 26

FG

FG

Intensiv Code

ISO Code

FG 5235 FG 5236 FG 5237 FG 5238 FG 5243 FG 5245 FG 5250 FG 5253 FG 5254 FG 5255 FG 5255A FG 5256 FG 5257 FG 5257S FG 5258 FG 5259 FG 526 FG 526 C FG 526 GB FG 5274 FG 5274N FG 5305 FG 5305L FG 5308 FG 5310 FG 5310B FG 5310S FG 5311 FG 5312N FG 5314 FG 5314S FG 5315 FG 5315L FG 5315S FG 5325L FG 5335 FG 5400 FG 5400S FG 5401 FG 5405L FG 5406 FG 5407R FG 5408 FG 5410 FG 5410L FG 5414 FG 5417R FG 5422R FG 5423R FG 5505 FG 5505L FG 5510 FG 5514 FG 5526 FG 5712B FG 609 FG 609 C FG 610N FG 610N C FG 611 C FG 612 FG 6S FG 6S C FG 707 C FG 712 C FG 8030 FG 8040 FG 8040S FG 80D3 FG 80D4 FG 80D6 FG 80D7 FG 80D9 FG 8113NR FG 8113R FG 8113S FG 8117 FG 8195 FG 8200 FG 8200S FG 8201 FG 8201NL FG 8204 FG 8206 FG 8211 FG 8212S FG 8214 FG 8218 FG 8223 FG 8224 FG 8225 FG 8234

314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314

198 199 199 199 033 033 277 257 257 257 257 277 277 277 277 277 546 546 546 274 274 140 142 289 290 290 536 249 250 111 111 141 141 141 158 465 001 001 001 250 288 544 289 290 291 157 545 546 553 250 250 157 157 546 158 158 158 068 068 158 109 173 552 109 158 167 290 290 167 166 199 197 699 546 545 172 172 299 001 001 001 697 109 170 109 109 109 235 236 236 236 199

504 504 504 504 514 514 504 504 504 504 504 504 504 504 504 504 524 534 514 504 504 504 504 504 504 504 504 504 504 504 504 504 504 504 504 504 504 504 504 504 504 504 504 504 504 504 504 504 504 504 504 504 504 504 504 524 534 524 534 534 524 524 534 534 534 524 524 524 524 524 524 524 524 524 524 524 524 524 524 524 524 524 524 524 524 524 524 524 524 524 524 524

016 016 020 024 019 025 021 012 010 021 016 010 016 011 021 031 018 018 017 014 019 010 010 010 010 011 011 014 016 012 010 018 018 012 013 014 025 021 033 010 012 014 014 012 013 011 014 014 016 012 014 009 011 016 009 010 010 027 027 014 007 023 023 010 011 012 014 010 012 016 016 025 010 023 019 029 016 021 012 009 018 016 014 012 010 009 012 010 015 011 012 016

Shape

Page

856 850 850 850 899 899 379 368 368 368 368 379 379 379 379 379 847KR 847KR 847KR 390 390 880 882 878 879 879 874 862 863 837 837 881 881 881 837KR 392 801 801 801 863 877 845KR 878 879 879L 836KR 846KR 847KR 848KR 863 863 836KR 836KR 847KR 837KR 837KR 837KR 909 909 837KR 835 848 848 835 837KR 859 879 879 859 859 850 855 955 847KR 846KR 847 847 879K 801 801 801 801L 835 845 835 835 835 830 830L 830L 830L 850

26 26 27 27 34 34 34 32 32 32 32 33 33 33 33 33 24 24 24 34 34 15 16 17 18 18 37 20 20 14 14 16 16 16 14 36 8 8 8 20 18 23 17 18 18 15 23 24 24 20 20 15 15 24 14 14 14 36 36 14 13 37 37 37 14 29 18 18 29 29 26 25 28 24 23 23 22 31 8 8 8 9 13 22 13 13 13 11 12 12 12 26

FG

Intensiv Code

ISO Code

FG 8235 FG 8236 FG 8237 FG 8238 FG 8250 FG 8255 FG 8255A FG 8257 FG 8258 FG 8259 FG 8305L FG 8305LP FG 8308 FG 8310 FG 8315L FG 8315S FG 8325L FG 8388 FG 8400 FG 8400N FG 8400S FG 8404 FG 8406A FG 8410 FG 8410L FG 8411R FG 8414 FG 8414B FG 8417R FG 8422R FG 8423R FG 8425 FG 8427 FG 8505L FG 8510 FG 8513 FG 8514 FG 8517 FG 8525 FG 8526 FG 8614 FG 8710 FG 8712 FG 8714 FG 9040 FG 90D1 FG 90D14 FG 90D2 FG 90D3 FG 90D4 FG 90D6 FG 90D9 FG 9195 FG 92 FG 9205 FG 9205L FG 9206 FG 9214 FG 9223 FG 9235 FG 9236 FG 9238 FG 9243 FG 9245 FG 9250 FG 9255 FG 9259 FG 9274 FG 9274N FG 9305L FG 9308 FG 9315L FG 9323 FG 9325L FG 9327 FG 9400 FG 9401 FG 9405L FG 95 FG 95 C FG 95 GB FG 9505L FG 98 FG 99 FG D1 FG D1 C FG D1 GB FG D11 FG D11 C FG D11 GB FG D11A FG D11A C

314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314

198 199 199 199 277 257 257 277 277 277 142 158 289 290 141 141 158 289 001 001 001 139 288 290 291 544 157 157 545 546 553 545 546 250 157 545 157 546 545 546 158 156 158 156 290 699 165 165 167 166 199 699 299 303 247 248 170 109 236 198 199 199 033 033 277 257 277 274 274 142 289 141 236 158 158 001 001 250 213 213 213 250 110 110 699 699 699 165 165 165 165 165

524 524 524 524 524 524 524 524 524 524 524 524 524 524 524 524 524 524 524 524 524 524 524 524 524 524 524 524 524 524 524 524 524 524 524 524 524 524 524 524 524 524 524 524 494 494 494 494 494 494 494 494 494 524 494 494 494 494 494 494 494 494 494 494 494 494 494 494 494 494 494 494 494 494 494 494 494 494 524 534 514 494 524 524 524 534 514 524 534 514 524 534

018 018 022 026 023 023 018 018 023 033 012 013 012 012 020 014 015 014 027 025 023 014 013 014 015 021 014 014 016 016 018 014 014 016 011 018 013 016 018 018 014 010 011 014 011 008 011 010 010 013 013 007 018 015 011 009 009 009 012 015 015 023 019 024 020 020 030 013 018 010 009 017 013 012 015 024 033 009 019 019 018 013 008 010 010 010 010 010 010 010 012 012

FG

Shape

Page

Intensiv Code

ISO Code

856 850 850 850 379 368 368 379 379 379 882 837KR 878 879 881 881 837KR 878 801 801 801 838 877 879 879L 845KR 836KR 836KR 846KR 847KR 848KR 846KR 847KR 863 836KR 846KR 836KR 847KR 846KR 847KR 837KR 836KR 837KR 836KR 879 956 858 858 859 859 850 955 879K 825 860 861 845 835 830L 856 850 850 899 899 379 368 379 390 390 882 878 881 830L 837KR 837KR 801 801 863 888 888 888 863 836 836 956 956 956 858 858 858 858 858

26 26 27 27 34 32 32 33 33 33 16 14 17 18 16 16 14 17 8 8 8 15 18 18 18 23 15 15 23 24 24 23 24 20 15 23 15 24 23 24 14 15 14 15 18 28 29 29 29 29 26 28 31 36 19 19 22 13 12 26 26 27 34 34 34 32 33 34 34 16 17 16 12 14 14 8 8 20 20 20 20 20 13 13 28 28 28 29 29 29 29 29

FG D12 FG D13 FG D13 C FG D13L FG D13L C FG D14 FG D14 C FG D14 GB FG D15 FG D15 C FG D15L FG D15L C FG D16 FG D16 C FG D16 CB FG D16 GB FG D17 FG D17 C FG D17 CB FG D18 FG D18 C FG D18 CB FG D18 GB FG D19 FG D19 C FG D19L FG D19L C FG D2 FG D2 C FG D2 GB FG D20 FG D20 C FG D20 CB FG D20 GB FG D21 FG D21 C FG D21 CB FG D21 GB FG D22 FG D22 C FG D22 CB FG D22 GB FG D22L FG D22L C FG D23 FG D24 FG D25 FG D25 C FG D25 CB FG D26 FG D26 C FG D3 FG D3 C FG D3 GB FG D33 FG D33 C FG D34 FG D34 C FG D34 GB FG D34A FG D34A C FG D34A GB FG D35 FG D35 C FG D36 FG D36 C FG D37 FG D37 C FG D38 FG D38 C FG D39 FG D39 C FG D4 FG D4 C FG D4 GB FG D40 FG D4A FG D4A C FG D5 FG D5 C FG D5 CB FG D5 GB FG D5L FG D5L C FG D6 FG D6 C FG D6 CB FG D6 GB FG D7 FG D7 C FG D7 CB FG D7 GB

314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314

173 173 173 174 174 165 165 165 173 173 174 174 197 197 197 197 197 197 197 198 198 198 198 173 173 174 174 165 165 165 213 213 213 213 213 213 213 213 173 173 173 173 174 174 198 198 198 198 198 198 198 167 167 167 167 167 166 166 166 166 166 166 167 167 167 167 167 167 166 166 166 166 166 166 166 247 166 166 173 173 173 173 174 174 199 199 199 199 197 197 197 197

524 524 534 524 534 524 534 514 524 534 524 534 524 534 544 514 524 534 544 524 534 544 514 524 534 524 534 524 534 514 524 534 544 514 524 534 544 514 524 534 544 514 524 534 524 524 524 534 544 524 534 524 534 514 524 534 524 534 514 524 534 514 524 534 524 534 524 534 524 534 524 534 524 534 514 524 524 534 524 534 544 514 524 534 524 534 544 514 524 534 544 514

010 012 012 012 012 014 014 013 014 014 014 014 012 012 013 011 014 014 015 016 016 017 015 018 018 018 018 012 012 011 023 023 024 022 023 023 024 022 023 023 024 022 021 021 009 010 012 012 013 014 014 012 012 012 010 010 014 014 013 012 012 011 014 014 016 016 018 018 018 018 021 021 016 016 015 010 010 010 016 016 017 015 016 016 016 016 017 015 025 025 026 023

Shape

Page

Intensiv Code

ISO Code

Shape

Page

848 848 848 848L 848L 858 858 858 848 848 848L 848L 855 855 855 855 855 855 855 856 856 856 856 848 848 848L 848L 858 858 858 888 888 888 888 888 888 888 888 848 848 848 848 848L 848L 856 856 856 856 856 856 856 859 859 859 859L 859L 859 859 859 859 859 859 859L 859L 859L 859L 859L 859L 859 859 859 859 859 859 859 860 859 859 848 848 848 848 848L 848L 850 850 850 850 855 855 855 855

21 21 21 21 21 29 29 29 21 21 21 21 25 25 25 25 25 25 25 26 26 26 26 21 21 21 21 29 29 29 20 20 20 20 20 20 20 20 21 21 21 21 21 21 26 26 26 26 26 26 26 29 29 29 29 29 29 29 29 29 29 29 29 29 29 29 29 29 29 29 29 29 29 29 29 19 29 29 21 21 21 21 21 21 26 26 27 26 25 25 25 25

FG D8 FG D8 C FG D8 CB FG D8 GB FG D9 FG D9 C FG D9 GB FG S12 Pilot FG S4 Pilot FG S8 Pilot

314 314 314 314 314 314 314 314 314 314

197 197 197 197 699 699 699 552 552 552

524 534 544 514 524 534 514 524 524 524

016 016 018 015 010 010 009 012 004 008

855 855 855 855 955 955 955 834 834 834

25 25 25 25 28 28 28 37 37 37

315 315 315 315 315 315 315 315 315 315 315 315 315 315 315 315 315 315 315 315 315 315

001 001 001 001 001 001 001 001 170 170 257 257 277 277 001 001 001 001 001 277 257 277

524 534 524 534 524 534 534 534 524 534 524 534 524 534 524 524 534 524 534 514 504 504

012 012 018 018 016 016 014 014 014 012 023 023 023 023 027 025 025 023 023 022 021 022

801 801 801 801 801 801 801 801 845 845 368 368 379 379 801 801 801 801 801 379 368 379

8 8 8 8 8 8 8 8 22 22 32 32 33 33 8 8 8 8 8 33 32 33

313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313

110 110 110 110 172 172 172 172 172 172 172 172 129 129 129 219 219 001 001 001 001 001 001 001 001 001 001 001 001 001 010 010 010 109 109 109 247 247 247 247 248 248 248 248 170 170 170 108 108 108 109 109

524 534 544 514 524 534 544 514 524 534 544 514 524 534 514 524 514 524 524 534 514 524 534 514 524 534 514 524 534 514 524 534 514 524 534 514 524 534 544 514 524 534 544 514 524 534 514 524 534 514 524 534

014 014 015 013 012 012 013 010 016 016 017 015 012 012 011 012 011 007 012 012 012 009 009 008 018 018 018 014 014 014 016 016 015 014 014 013 014 014 015 013 012 012 013 011 012 012 011 010 010 009 009 009

836 836 836 836 847 847 847 847 847 847 847 847 885 885 885 851 851 801 801 801 801 801 801 801 801 801 801 801 801 801 805 805 805 835 835 835 860 860 860 860 861 861 861 861 845 845 845 835 835 835 835 835

38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

FGL FGL 200 FGL 200 C FGL 201 FGL 201 C FGL 201N FGL 201N C FGL 201S FGL 201S C FGL 206 FGL 206 C FGL 255 FGL 255 C FGL 258 FGL 258 C FGL 400 FGL 400N FGL 400N C FGL 400S FGL 400S C FGL 4258 FGL 5255 FGL 5258

FGM FGM 114 FGM 114 C FGM 114 CB FGM 114 GB FGM 116 FGM 116 C FGM 116 CB FGM 116 GB FGM 117 FGM 117 C FGM 117 CB FGM 117 GB FGM 124 FGM 124 C FGM 124 GB FGM 19 FGM 19 GB FGM 199 FGM 200 FGM 200 C FGM 200 GB FGM 200S FGM 200S C FGM 200S GB FGM 201 FGM 201 C FGM 201 GB FGM 201S FGM 201S C FGM 201S GB FGM 202 FGM 202 C FGM 202 GB FGM 204 FGM 204 C FGM 204 GB FGM 205 FGM 205 C FGM 205 CB FGM 205 GB FGM 205L FGM 205L C FGM 205L CB FGM 205L GB FGM 206 FGM 206 C FGM 206 GB FGM 210 FGM 210 C FGM 210 GB FGM 212 FGM 212 C

87

Intensiv and ISO Code Index Continuation

FGM

RA

RA

Intensiv Code

ISO Code

Shape

Page

Intensiv Code

ISO Code

FGM 212 GB FGM 214 FGM 214 C FGM 216 FGM 216 C FGM 216 GB FGM 216N FGM 216N C FGM 216N GB FGM 218 FGM 218 C FGM 218 GB FGM 219 FGM 219 C FGM 219 GB FGM 220 FGM 220 C FGM 220 CB FGM 220 GB FGM 254 FGM 254 C FGM 254 GB FGM 255 FGM 255 C FGM 255 CB FGM 255 GB FGM 300 FGM 300 C FGM 300 GB FGM 300S FGM 305 FGM 305 C FGM 305 CB FGM 305 GB FGM 306 GB FGM 308 FGM 308 C FGM 308 CB FGM 308 GB FGM 315S FGM 315S C FGM 315S CB FGM 315S GB FGM 316 FGM 316 C FGM 316 GB FGM 316N FGM 316N C FGM 316N GB FGM 316S C FGM 321 FGM 321 C FGM 4201 FGM 4204 FGM 4315S FGM 50D7 FGM 50D8 FGM D16 FGM D16 C FGM D16 CB FGM D16 GB FGM D18 FGM D18 C FGM D18 CB FGM D18 GB FGM D2 FGM D2 C FGM D7 FGM D7 C FGM D7 CB FGM D7 GB FGM D8 FGM D8 C FGM D8 CB FGM D8 GB

313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313 313

109 109 109 010 109 010 010 010 010 237 237 237 237 237 237 237 237 237 237 257 257 257 257 257 257 257 002 002 002 002 140 140 140 140 288 289 289 289 289 141 141 141 141 019 019 019 019 019 019 019 141 141 001 109 141 197 197 197 197 197 197 198 198 198 198 165 165 197 197 197 197 197 197 197 197

514 524 534 524 534 514 524 534 514 524 534 514 524 534 514 524 534 544 514 524 534 514 524 534 544 514 524 534 514 524 524 534 544 514 514 524 534 544 514 524 534 544 514 524 534 514 524 534 514 534 524 534 514 514 514 504 524 524 534 544 514 524 534 544 514 524 534 524 534 544 514 524 534 544 514

008 012 012 012 012 011 009 009 008 010 010 009 012 012 011 018 018 020 017 012 012 011 023 023 024 022 012 012 011 009 012 012 013 011 009 012 012 013 011 014 014 015 013 012 012 011 009 009 008 008 012 012 017 013 013 022 014 012 012 013 011 016 016 017 015 012 012 025 025 026 024 016 016 018 015

835 835 835 805 805 805 805 805 805 830R 830R 830R 830R 830R 830R 830R 830R 830R 830R 368 368 368 368 368 368 368 802 802 802 802 880 880 880 880 877 878 878 878 878 881 881 881 881 806 806 806 806 806 806 806 881 881 801 835 881 855 855 855 855 855 855 856 856 856 856 858 858 855 855 855 855 855 855 855 855

38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38

204 204 204 204 204 204 204 204 204 204 204 204 204

171 171 171 165 164 111 110 172 172 172 164 164 068

524 534 514 524 514 524 514 524 534 514 524 514 524

018 018 017 018 017 014 013 016 016 015 016 015 039

846 846 846 852 852 836 836 847 847 847 852 852 909

21 21 21 28 28 13 13 22 22 22 28 28 36

RA 11A GB RA 130 RA 18L RA 19 RA 199 RA 19L RA 200 RA 200 C RA 200 GB RA 200S RA 200S GB RA 201 RA 201 C RA 201 GB RA 201S RA 201S C RA 201S GB RA 202 RA 202 C RA 202 CB RA 202 GB RA 204 RA 204 C RA 204 GB RA 205 RA 205 GB RA 205L RA 205L GB RA 206 RA 206 GB RA 208 RA 210 RA 210 GB RA 212 RA 212S RA 214 RA 214 C RA 216 RA 216 GB RA 216N RA 219 RA 219 C RA 220 RA 220 C RA 220 GB RA 223 RA 223 GB RA 236 RA 236 C RA 236 GB RA 250 RA 254 RA 254 C RA 254 GB RA 255 RA 255 C RA 255 GB RA 255A RA 255A GB RA 274 RA 274 GB RA 30 RA 300 RA 301 RA 301S RA 305L RA 305L GB RA 308 RA 308 GB RA 30D8 RA 31 RA 310 RA 310 C RA 310 GB RA 311 RA 311 GB RA 3113R RA 3117 RA 314 RA 314 C RA 314 GB RA 314S RA 314S GB RA 315S RA 315S C RA 315S GB RA 32 RA 3201 RA 3205 RA 3219 RA 3236 RA 3250

204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204

RA RA 113 RA 113 C RA 113 GB RA 113A RA 113A GB RA 114 RA 114 GB RA 117 RA 117 C RA 117 GB RA 117S RA 117S GB RA 11A

88

068 040 220 219 001 220 001 001 001 001 001 002 001 001 001 001 001 010 010 010 010 109 109 109 247 247 249 248 170 170 170 108 108 109 108 109 109 010 010 010 237 237 237 237 237 238 238 199 199 199 277 257 257 257 257 257 257 257 257 274 274 167 002 002 002 142 142 289 289 197 111 290 290 290 249 249 545 172 111 111 111 111 111 141 141 141 290 001 247 235 199 277

514 524 524 524 524 524 524 534 514 524 514 524 534 514 514 534 514 524 534 544 514 524 534 514 524 514 524 514 524 514 524 524 514 524 524 524 534 524 514 524 524 534 524 534 514 524 514 524 534 514 524 524 534 514 524 534 514 524 514 524 514 524 524 524 524 524 514 524 514 524 524 524 534 514 524 514 524 514 524 534 514 524 514 524 534 514 524 514 514 514 514 514

RA

Shape

Page

Intensiv Code

ISO Code

038 909 035 815 016 857 012 851 007 801 017 857 012 801 012 801 012 801 009 801 008 801 018 801 018 801 018 801 014 801 014 801 014 801 016 805 016 805 017 805 015 805 014 835 014 835 013 835 014 860 013 860 012 861 011 861 012 845 011 845 014 845 010 835 009 835 009 835 009 835 012 835 012 835 012 805 011 805 009 805 012 830R 012 830R 018 830R 018 830R 017 830R 014 830RL 013 830RL 018 850 018 850 017 850 023 379 012 368 012 368 011 368 023 368 023 368 022 368 018 368 017 368 016 390 015 390 012 859 012 802 018 802 014 802 012 882 011 882 012 878 011 878 014 855 012 837 012 879 012 879 011 879 016 862 015 862 017 846KR 014 847 014 837 014 837 013 837 012 837 011 837 014 881 014 881 013 881 012 879 016 801 012 860 010 830 016 850 021 379

36 35 28 27 8 28 8 8 8 8 8 8 8 8 8 8 8 10 10 10 10 13 13 13 19 19 19 19 22 22 22 13 13 13 13 13 13 10 10 10 11 11 11 11 11 12 12 27 27 27 34 32 32 32 32 32 32 32 32 34 34 29 9 9 9 16 16 17 17 25 14 18 18 18 20 20 23 22 14 14 14 14 14 16 16 16 18 8 19 11 26 34

RA 3274 RA 33 RA 34 RA 400 RA 400 C RA 400 GB RA 400S RA 400S C RA 400S GB RA 401 RA 401 C RA 401 GB RA 4035 RA 4036 RA 4037 RA 4038 RA 4039 RA 404 RA 405L RA 405L GB RA 4062 RA 40D18 RA 40D2 RA 40D3 RA 40D4 RA 40D6 RA 40D9 RA 4117 RA 4117S RA 4201 RA 4205 RA 4205L RA 4223R RA 4236 RA 4250 RA 4255 RA 4258 RA 4274 RA 4308 RA 4311 RA 4400 RA 4401 RA 4406 RA 5062 RA 50D18 RA 50D2 RA 50D3 RA 50D6 RA 50D9 RA 5117 RA 5117S RA 5201 RA 5205 RA 5205L RA 5223 RA 5236 RA 5250 RA 5255 RA 5255A RA 5274 RA 5400 RA 5400S RA 8223 RA 8250 RA 90D14 RA 9205 RA 9274 RA 95 RA 95 C RA 95 GB RA A6 RA D1 RA D1 GB RA D11 RA D14 RA D16 RA D16 C RA D16 GB RA D18 RA D18 C RA D18 GB RA D2 RA D2 C RA D2 GB RA D20 RA D21 RA D21 GB RA D22 RA D22 C RA D22 CB RA D22 GB RA D3

204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204

274 142 257 001 001 001 001 001 001 001 001 001 466 111 290 142 257 139 250 250 297 198 165 167 166 199 699 172 164 001 247 248 236 199 277 257 277 274 289 249 001 001 288 297 198 165 167 199 699 172 164 001 247 248 236 199 277 257 257 274 001 001 236 277 165 247 274 213 213 213 257 699 699 165 165 197 197 197 198 198 198 165 165 165 213 213 213 173 173 173 173 167

524 524 524 524 534 514 524 534 514 524 534 514 514 514 514 524 514 524 524 514 514 514 514 514 514 514 514 514 524 514 514 514 514 514 514 514 514 514 514 514 514 514 514 504 504 504 504 504 524 504 504 504 504 514 504 504 504 504 504 514 504 524 524 524 494 494 494 524 534 514 524 524 514 524 524 524 534 514 524 534 514 524 534 514 524 524 514 524 534 544 514 524

014 012 023 027 027 026 023 023 022 036 036 034 015 011 011 011 022 014 012 011 014 015 011 011 015 015 009 015 015 017 013 011 014 016 022 022 022 015 011 015 026 034 013 013 014 010 011 014 008 014 014 016 012 010 013 016 021 021 016 014 025 021 015 023 011 011 013 019 019 17 010 010 010 010 014 012 012 011 016 016 015 012 012 011 023 023 022 023 023 024 022 012

Shape

Page

390 882 368 801 801 801 801 801 801 801 801 801 833 837 879 882 368 838 863 863 877K 856 858 859 859 850 955 847 852 801 860 861 830L 850 379 368 379 390 878 862 801 801 877 877K 856 858 859 850 955 847 852 801 860 861 830L 850 379 368 368 390 801 801 830L 379 858 860 390 888 888 888 368 956 956 858 858 855 855 855 856 856 856 858 858 858 888 888 888 848 848 848 848 859

34 16 32 8 8 8 8 8 8 8 8 8 36 14 18 16 32 15 20 20 30 26 29 29 29 26 28 22 28 8 19 19 12 26 34 32 33 34 17 20 8 8 18 30 26 29 29 26 28 22 28 8 19 19 12 26 34 32 32 34 8 8 12 34 29 19 34 20 20 20 32 28 28 29 29 25 25 25 26 26 26 29 29 29 20 20 20 21 21 21 21 29

Intensiv Code

ISO Code

RA D3 C RA D3 GB RA D4 RA D4 C RA D4 GB RA D5 RA D5 GB RA D6 RA D6 C RA D6 CB RA D6 GB RA D7 RA D7 C RA D7 GB RA D8 RA D8 GB RA D9

204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204

167 167 166 166 166 173 173 199 199 199 199 197 197 197 197 197 699

534 514 524 534 514 524 514 524 534 544 514 524 534 514 524 514 524

012 012 016 016 015 016 015 016 016 017 016 025 025 023 016 015 010

Shape

Page

859 859 859 859 859 848 848 850 850 850 850 855 855 855 855 855 955

29 29 29 29 29 21 21 26 26 27 26 25 25 25 25 25 28

* as long as stocks last FG 102 FG 102 C FG 102 GB FG 104A FG 104A C FG 105A C FG 106A FG 106A C FG 108 FG 108 C FG 112 FG 119L FG 119L C FG 122 FG 122 C FG 126 FG 126 C FG 127 FG 127 C FG 128 FG 128 C FG 128A FG 128A C FG 130 FG 130 GB FG 221 FG 221 C FG 221 GB FG 221L FG 221L C FG 221L GB FG 222 FG 318 FG 318 C FG 318 GB FG 319 FG 319 C FG 319 GB FG 320S FG 320S C FG 320S CB FG 4221 FG 4221L FG 4222 FG 435 FG 435 C FG 436 FG 436 C FG 437 FG 437 C FG 438 FG 438 C FG 92/6 RA 221 RA 221 RA 318

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 314 204 204 204

313 313 313 304 304 304 304 304 304 304 304 226 226 040 040 040 040 040 040 040 040 040 040 040 040 150 150 150 150 150 150 150 494 494 494 494 494 494 494 494 494 150 150 150 251 251 251 251 251 251 251 251 303 150 150 494

524 534 514 524 534 534 524 534 524 534 524 524 534 524 534 524 534 524 534 524 534 524 534 524 514 524 534 514 524 534 514 524 524 534 514 524 534 514 524 534 544 514 514 514 524 534 524 534 524 534 524 534 524 524 524 524

042 042 041 018 018 023 025 025 050 050 031 018 018 012 012 016 016 018 018 023 023 027 027 035 034 011 011 011 012 012 012 014 010 010 009 012 012 011 016 016 017 011 012 014 012 012 014 014 016 016 018 018 015 011 011 010

825 825 825 825 825 825 825 825 825 825 825 807L 807L 815 815 815 815 815 815 815 815 815 815 815 815 839 839 839 839 839 839 839 830A 830A 830A 830A 830A 830A 830A 830A 830A 839 839 839 864 864 864 864 864 864 864 864 825 839 839 830A

Wheel

Pear coated neck

Lenticular

Flame cylindrical flame, long

Cylinder end-coated only

Inverted cone extra-long

Intensiv Diamond Instruments*

* as long as stocks last

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

P001E Proud member of

Intensiv SA Via al Molino 107 6926 Montagnola Switzerland

Tel. +41 91 986 50 50 Fax +41 91 986 50 59 info@intensiv.ch www.intensiv.ch