Intensiv Catalogue 2010-2011_E

Catalogue 2010/2011

Intensiv: Innovation, Science and Quality

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

Dear Customer,

A constantly high and long lasting cutting efficiency is the sustainable distinctive feature of our diamond instruments: you can rely on this quality whenever you use an Intensiv instrument – without any restrictions. Starting with the selection of natural diamonds - our most valuable raw material - we are extremely demanding and collaborate exclusively with our competent long-term business partner.

Only on this solid base and due to our precise multi-stage manufacturing process the Intensiv diamond instruments achieve their high efficiency. Each instrument is carefully verified according to constantly improved processes and high quality standards. To this end we adopt computer-controlled measurement techniques and rely on the utmost sensibility of our loyal employees. Every single dental instrument is checked and only after that it is marked with the company quality seal, well visible for you on the package.

International studies - as the one from the “Universitat Internacional de Catalunya” in Barcelona - confirm our outstanding quality philosophy. One result of this study shows that many more polygonal diamond particles are anchored extremely deep in the Intensiv instrument, thus contributing to the longevity and efficiency of the cutting capacity while preparing, contouring, finishing and polishing.

Whether diamond high gloss shining polishing paste UniglossPaste, diamondcoated metal strip ProxoStrip or rotating diamond instruments: only with firstclass diamond particles of specific grits we achieve a diamond coating which satisfies even the most demanding requirements on treatment results. At the same time, together with university clinics and specialists, we have developed a product portfolio for all preparation stages, to always offer the right diamond instrument for every application.

The cooperation with experts and with you - our customer - ensure the additional benefits of Intensiv developments: the UniglossPaste, for instance, reduces the time for the high gloss polishing of aesthetic fillings to max. 15 seconds and can be used with a nylon brush. Diamond instruments from Intensiv are considered as considerably more gentle to the material, since fractures of enamel and filling margins occur significantly more seldom, while at the same time the share of perfect filling margins is much higher.

Convince yourself of the high functionality of our products. We guarantee constant extraordinary quality properties - on this you can rely for every single treatment!

Sincerely yours, Günter Smailus, CEO Intensiv SA

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

1

Innovations

Intensiv

Innovations

09 ES-A4

28-04-2009

16:50

Pagina 1

ur Intensiv Request yo e s catalogu Innovation

Intensiv ProxoStrip

Intensiv UniglossPaste

See page 60

See page 60

Intensiv MarginFinisher

Intensiv PerioDiaCurette

See page 68

See page 68

Intensiv DiaTweezer

Intensiv MarginShaper

See page 68

See page 66

Intensiv Zirkon Set

Intensiv CrownCutter

See page 66

See page 31

Intensiv AntiReflex

See page 30

­2

Pat. Pend.N° 2007 0219/07

Pat. Pend.N° 2007 0320/07

Intensiv HygienicTray

See page 29

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

Index

A-Z Advanced Prep Set for Cerec Restorations Advanced Finishing Set for Cerec Restorations Amalgam Prep Set Amalgashape Set AntiReflex Diamond Instruments Range New Berner Uni Prep Set Bevelshape Set Cavishape Set Cerec Set Cerinlay Set Codes and symbols Code Index Combi Prep Set Contouring & Finishing Combi Prep Set DR Combi Prep Set IDR Composhape Set Anterior & Posterior Composhape Set 1 Contact and order New CrownCutter Diamond Instruments FG New DiaTweezer Geneva Prep Set New HygienicTray Innovations Inlay Set New MarginFinisher New MarginShaper Minimal Invasiv Prep Set Modular Veneer Set Ortho-Strips System Set Ortho-Strips One-Sided Set New PerioDiaCurette Perio Set Piccolo Set Proxoshape Set Proxoshape Set Optional Profi Prep Set New ProxoStrip Recommendations Rootshape Set Shape chart Shoulder Bevel Prep Set St. Moritzer Crown & Laminate Prep Set Tooth Caring Bur Set New UniglossPaste Uniprep Set Crown & Bridges Universal Set New Zirkon Set

42 42 34 52 30 46 62 62 44 38 04 70 54 36 40 54 52 80 31 08 68 46 29 02 38 68 66 32 44 64 64 68 56 32 58 58 48 60 06 56 07 50 48 36 60 50 34 66

Introduction

Innovations

Codes and symbols

Recommendations Intensiv Diamond Instruments

Shape chart

Intensiv Diamond Instruments FG Special lines

Intensiv HygienicTray

Intensiv AntiReflex Diamond Instr. Range

Intensiv CrownCutter Sets

Cavities

Intensiv Minimal Invasiv Prep Set

Intensiv Piccolo Set

Intensiv Amalgam Prep Set

Intensiv Universal Set

Intensiv Tooth Caring Bur Set

Intensiv Combi Prep Set DR

Intensiv Inlay Set

Intensiv Cerinlay Set

Intensiv Combi Prep Set IDR

Crowns and Bridges

Advanced Prep Set for Cerec Restorations

Advanced Finishing Set for Cerec Restorations

Cerec Set

Intensiv Modular Veneer Set

Berner Uni Prep Set

Geneva Prep Set

St. Moritzer Crown & Laminate Prep Set

Intensiv Profi Prep Set

Shoulder Bevel Prep Set

Uniprep Set Crown & Bridges

Contouring and Finishing

Intensiv Amalgashape Set

Intensiv Composhape Set 1

Intensiv Composhape Set Anterior & Posterior

Intensiv Combi Prep Set Contouring & Finish.

Specialities

Intensiv Perio Set

Intensiv Rootshape Set

Intensiv Proxoshape Set

Intensiv Proxoshape Set Optional

Intensiv ProxoStrip

Intensiv UniglossPaste

Intensiv Cavishape Set

Intensiv Bevelshape Set

Intensiv Ortho-Strips System

Intensiv Ortho-Strips One-Sided Set

Intensiv MarginShaper

Intensiv Zirkon Set

Intensiv MarginFinisher

Intensiv PerioDiaCurette

Intensiv DiaTweezer

Code Index Contact and order

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

02 04 06 07 08 29 30 31

32 32 34 34 36 36 38 38 40 42 42 44 44 46 46 48 48 50 50 52 52 54 54 56 56 58 58 60 60 62 62 64 64 66 66 68 68 68 70 80 3

ISO Shank Codes and ISO Number Codes

FG Miniature FG FG Long Right-angle

(FGM) (FG) (FGL) (RA)

ISO ISO ISO ISO

Example: 314 Shank type and length 257 Shape of the head 524 Grit size 022 Diameter of the working part

313 314 315 204

L mm

Length of the working part

Intensiv Color Codes of the grit sizes

Depending on the shape and size of the instruments, the grit size may differ from the specified value (*).

Symbols of indications

n Cavity preparation

n Root planing

n Crown preparation

n Orthodontics

n Finishing of the filling

n Crown separation

足4

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

Intensiv Number Code and ISO Code

n The tables are divided into shape groups. n The relation between Intensiv and ISO code is easy to establish. n Example: ISO code 314 257 524 022 corresponds to the Intensiv code 8255. n Intensiv code in red = also in RA

Package units: packages of 6 instruments = .../6 Examples: Intensiv reference code 8255

= FG 8255/6

4255

= FG 4255/6 or = RA 4255/6

M254C

= FGM 254/6 C

L255

= FGL 255/6

Recommended speeds for diamond instruments

Speed min. -1 ISO ø 1/10 mm Speed range

Contact pressure Grit Extra fine N (=g) 0,1 (10)

Grit Fine N (=g) 0,1 (10)

1,0 (100) 1,0 Water spray minimum 50 ml / min. Finishing 20’000 - 40’000 min. -1

(100)

N 0,2

Grit Medium (=g) N (20) 0,3

1,5

(150) 2,0

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

(=g) (30)

(200)

Grit Coarse N (=g) 0,4 (40)

3,0

(300)

5

Recommendations

1

Proper use n The bur shanks must be inserted as deeply as possible into the chuck (1). n Avoid jamming or levering actions when rotating, as this increases the risk of instrument breakage. n Before applying the instrument to the workpiece, reach the required working speed. n Use the instruments over the entire length of their working head and not just at the tip, so as to avoid an unconscious increase of the contact pressure causing local overheating (2). n Never exceed the specified maximum speed so as to avoid instrument breakage caused by the generation of powerful centrifugal forces. This occurs in particular when the diameter of the working head exceeds that of the shaft (3). n Provide for adequate water irrigation (minimum 50 ml/min). n In case of instruments exceeding ISO 027 provide additional waterspray cooling. n Clean the instruments and remove debris after each use, so as to maintain their abrasive ability. We recommend to use the appropriate Intensiv Cleaning Rubber Diakleen.

Maintenance of Diamond Instruments n Instruments are delivered nonsterile. They must be disinfected, cleaned, and sterilized prior to first use on the patient and immediately after each use.

Disinfection n Disinfect the diamond instruments separately from non-stainless steel instruments, such as polishers and abrasives. n Use only cleaning/disinfection solutions that provide corrosion protection, and strictly observe the concentrations and reaction times recommended by the manufacturer. n In case of heavily contaminated instruments it is advisable to use an ultrasonic bath.

Inspection/Cleaning n After disinfection, inspect the burs for residual contamination. If necessary, repeat the disinfection/ cleaning procedure. n Clean clogged diamond surfaces using the special Intensiv Cleaning Rubber Diakleen or a suitable brush.

Thoroughly rinse the instruments with water and dry them immediately.

2

3

n Check for possible damages; dispose of oxydized, blunt and eccentric burs as well as those that show detachments of the diamond coating.

Sterilization n Sterilization must be performed with validated procedures. If possible, use a single-pulsed or fractionated vacuum autoclave and subvacuum drying. n Chemiclave sterilizers may also be used. Hot air sterilizers are not suitable for diamond instruments. n Avoid temperatures above 180° C which may affect the durability of the instruments. n Concerning the sterilization process we refer to the ISO standard 17664; so we suggest to follow these advices: Cycles at 134°C: Tmin = 134°C – Tmax = 138°C Pressure = 3.15 bar abs Time = 4 min (raisable) Cycles at 121°C: Tmin = 121°C – Tmax = 125°C Pressure = 2.10 bar abs Time = 16 min (raisable) General information n Keep the original package for the whole life cycle of the instrument, in order to ensure batch traceability.

Carbide instruments for crown and bridges cutting: Recommendations for Use and Safe Operation in Dental Practices The service-life of carbide instruments depends on compliance with the following recommendations for use and safe operation. The instruments must be fully inserted and gripped in the contra angle with the utmost of care. It is recommended to use the red contra-angle (1:5) with connection to micro motor. Select the correct speed to ensure optimum performance and service-life. Operate within the recommended speed ranges. The hints covering maximum permissible speeds must be heeded. Before placing the tungsten carbide bur/finisher in contact with the site being prepared, check that the bur is rotating at the optimum speed and that the cooling system is functioning properly. Once the preparation has been completed, remove the rotary instrument from the site and allow it to come to a standstill. Prepare carefully and without exerting pressure. Select the pressure (maximum 0.3 – 0.5 N) to ensure that the speed is not reduced noticeably. The pressure exerted on the rotary instrument is a decisive factor for the working procedure and the successful outcome of the preparation. Under no circumstances should the burs be allowed to jam. The tilt of instrument should be avoid. To prevent harm to the tooth structure, pulp and adjacent fillings, cool by spraying with sufficient amounts of water. The removal (separation) process without using sufficient coolant – minimum: 50ml/min. and incorrect application of the coolant (spray diverted, inadequate ejection) may adversely affect the final result.

­6

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

Shape chart

Page 08

801

801L

Page 13

837L

Page 22

850

802

805

813

806

836KR 837KR

838

880

18

861

807

862

881

882

885

19

830

830RL

830L

863

888

845

886

886Z

830A

955

956

852

839

835

13

836

846

848

847

858

859

876

877

878

845KR 846KR 847KR 848KR

878K

879K

879

879L

22

25

877K

837 17

21

24

857

874

20

Page 27

811

830R

12

16

23

851

11

15

14

Page 17

860

10

09

855 26

898

368

New

New

833

392

856

850L

27

379

390

899

834

842

848

28

811L

815

818

817

817T

825

825

825

909

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

7

足8

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

9

足10

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

11

足12

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

13

足14

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

15

足16

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

17

足18

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

19

足20

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

21

足22

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

23

足24

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

25

足26

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

27

足28

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

Intensiv HygienicTray

by M. Gigandet, T. Engel, University of Bern, Switzerland

The unique bur block developed by dentists for dentists!

Hygienic, compact, sterilizable!

Bur blocks have become indispensable for the proper organization of rotary instruments in any structured dental clinic. Bur blocks support the dentists to organize the burs for a specific treatment, i.e. cavity preparation. In addition, they enable a simpler access to the rotating instruments during treatment and provide a support during the sterilization process as well as the storage of the rotating instruments.

Product description n Dismountable parts of high value stainless steel n Free from inaccessible fissures and hollows n Rounded edges n Fits in all standard sterilization trays n 13 FG and 5 RA irregular arranged positions of instrument holes

Intensiv HygienicTray HT100

Intensiv HygienicTray HT200

Intensiv HygienicTray HT300

n 3 dismountable parts: foldable cover; instrument tray; bottom n Folded back cover serves as base for the tray during treatment n Ergonomic instrument access due to high and inclined tray position

n 2 dismountable parts: foldable and dismountable cover; instrument tray n Ergonomic instrument access to stand-alone tray

n 2 dismountable parts: foldable cover; instrument tray n Folded back cover keeps the instrument tray in place during treatment n Ergonomic instrument access due to low and inclined tray position

Indications n Organization of rotary instrument sets for specific treatment protocols n Instrument support during sterilization process n Storage of individually composed instrument sets

Benefits n Rotating instruments organization during treatment n Easy instrument access due to irregular arranged position of instruments n Complete hygiene and dismountable parts n Ergonomic compact design, suitable for any standard sterilization tray n Durable resistant full sterilizable stainless steel

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

29

Intensiv AntiReflex

Pat. Pend. N° 2007 0320/07

by Prof. I. Krejci, University of Geneva, Switzerland

The dull black surface of the new Intensiv AntiReflex diamond instruments range allows a blindfree view on the operating field despite the indispensable strong illumination of the field.

Product description The Intensiv AntiReflex diamond instruments have a dull black surface which avoids light reflections caused by standard diamond instruments.

More and more treatments take place with magnifying visual aids (like magnifying glasses or microscopes) as well as protective glasses and standard mouth mirrors, this in addition to the increasingly strong illumination of the operating field. This trend causes the dentist to deal with the disturbing effect of the light reflection caused by shiny instrument surfaces.

Indications n Minimally invasive treatments n Mircro-invasive treatments n Treatments with magnifying optical devices, protective glasses and standard mouth mirrors Advantages n Non-reflecting instrument surface n Blind-free view on the operating field n Better contrast of the diamond instruments to the operating field n No eye irritation n Constant concentration and comfortable treatment

Intro Kit Ref. 110A

­30

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

Intensiv CrownCutter Clinically approved by Dr. S. Giani, University of Insubria, Varese, Italy

Carbide instruments for crown cutting Conical and cylindrical instruments with rounded and plain working surfaces with unique cutting edges for precise, vibration-free division.

Intensiv CrownCutter fulfil high demands perfectly, thanks to their uniquely designed cutting edges (pitch diameter precision) and exceptional manufacture (one-piece instrument).

Indications n Corte y remoci贸n de coronas y Cut and removal of crowns and bridges in metal as well as bonded metal/ ceramic n Removal of amalgam and gold fillings Benefits n Superior cutting performance n Accelerated separation process n Minimum patient stress during treatment n Chopped and not pulverized debris

1-8) Clinical pictures: Dr. S. Giani, University of Insubria, Varese, Italy

Package of 6 pcs

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

31

Intensiv Minimal Invasiv Prep Set University of Zurich, Switzerland

Diamond instruments for minimally invasive restorations Minimally invasive restoration techniques are designed to preserve healthy tooth substance. A defectoriented procedure therefore requires preparation techniques with appropriately miniaturized bur shapes.

Product description n 1 cylindrical bur, ISO size 007, head length 2.0mm, in grit 40µm for exact depth control and finishing. n 2 ball burs, ISO size 007, in 40µm grit with various neck lengths for access cavity and probing cavity for extended fissure sealing. n 1 wheel bur, ISO size 015, head length 0.7mm in 40µm grit for enamel-preserving undercutting preparations.

Indications Preparation of: n Class I amalgam and composite fillings n Classes II and III composite fillings n Palatal fillings n Tunnel preparations Benefits n Preservation of healthy tooth substance n Preservation of marginal ridge in tunnel preparations n Selective access n No need of final polishing

Intensiv Piccolo Set University of Bern, Switzerland

Diamond instruments for small cavity preparations with perfect margins This method allows the preparation of sharp, fracture-free retentive cavities.

­32

Product description n 3 inverted cones, ISO sizes 010, 012, 015, head lengths 2.8 / 3.0 / 4.5mm in 90µm grit for axial cavity preparation. n 3 shape-matching burs in 25µm grit size for finishing fracture-free cavity margins.

Indications Defect elimination and finishing of: n Cavity preparations for amalgam fillings n Pedodontic cavities Benefits n Preservation of healthy tooth substance n Preparation of precise durable cavities for amalgam fillings n Fracture-free enamel margins

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

1

1

2

3

4

5

2

1) Probing cavity 2) Depth control of the preparation with instrument FG 4612 3) Undercutting preparation without enlargement of the cavity access with instrument FG 4612 4) Preparation of the palatal micro cavity with instrument FG 4610 5) Palatal opening and preparation of an anterior cavity with instrument FG 4610

1) Cavity preparation with instrument FG 223B 2) Cavity finishing with instrument FG 3223

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

33

Intensiv Amalgam Prep Set University of Zurich, Switzerland

Diamond instruments for the preparation of perfect cavities for amalgam restorations The functional preparation of cavities for amalgam fillings aims at sharp fracture-free lateral cavity margins.

The shape, size, and grit sizes of these burs allow a preparation of ideal retentive, tooth caring cavity preparations with a minimum loss of healthy tooth substance in axial preparations.

Product description n 4 inverted cones, ISO sizes 010 / 011 / 012 / 014, head lengths 2.8 / 3.8 / 4.2 / 4.5mm in 80µm grit for retentive cavity preparations. n 4 shape-matching finishing burs in 25µm grit for non-destructive fracture-free finishing of enamel margins.

Indication Retentive cavity preparation for amalgam fillings Benefits n Preservation of healthy tooth hard substance n Perfect marginal adaptation n Fracture-free enamel margins n Rational preparation of retentive amalgam cavities

Intensiv Universal Set University of Zurich, Switzerland

Diamond instruments for preparation and finishing of cavities in esthetic adhesive restorations in posterior teeth The techniques for adhesive restorations in posterior teeth require sharply cut enamel and dentin margins, with parallel walls and rounded internal angles. Thanks to the cylindrical and slightly tapered finishing burs it is now possible to obtain precise profiles of the cavity form and an ideal finishing of the cavity margins.

­34

Product description n 3 cylindrical burs, ISO sizes 011 / 013 and 014, head lengths 6.0 / 6.0 and 8.0mm in grit 80µm, with rounded edges for cavity preparation for composite fillings and tooth-coloured inlays. n 3 shape-matching burs in 25µm grit for fracture-free finishing of the enamel and dentin margins. n 3 tapered burs, ISO sizes 016 / 022 und 013, in 25µm grit for minimal occlusal cavity enlargement.

Indications Preparation and finishing of: n Class I and II cavities for directly inserted composite fillings n Cavities for tooth-coloured inlays Benefits n Ideal sequence of 2 shapes and 2 grits n Exact preparation of fracture-free margins n Universal use

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

1

2

1) Retentive cavity preparation with instrument FG 8225 2) Finishing of the cavity with instrument FG 3225 3) Already polished amalgam restoration

3

1

2

3

4

5

6

7

8

1) Removal of an old amalgam restoration with instrument FG 8514 2) Build-up base filling 3) Prepared and finished cavity for an adhesive restoration with instrument FG 3514 4) Prepared and finished cavity for a bonded inlay with instrument FG 3513 5) Cavity preparation with instrument FG 8514 6) Cavity finishing with instrument FG 3513 7) Composite restoration 8) Cemented inlay

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

35

Intensiv Tooth Caring Bur Set University of Bern, Switzerland

Diamond instruments for lowering and finishing gingival floors of proximal cavities and shoulders of crown preparations without damaging adjacent teeth This preparation method requires a set of special burs to enable efficient and controlled substance removal. At the same time these burs ensure perfectly finished surfaces of shoulders and margins for abutments in prosthetics.

Product description n 2 cylindrical end cutting burs, with rounded edges, ISO size 011 in grits 40 and 25µm. n 3 shape and dimension matching burs, ISO 014 in grits 80, 40 and 25µm for lowering and finishing of proximal box preparations and shoulders of crown preparations while avoiding iatrogenic damage to adjacent teeth.

Indication Preparation of shoulder margins and proximal box margins Benefits n Preservation of prepared abutment and shoulder profiles n Prevention of iatrogenic damage

Intensiv Combi Prep Set: Direct Restoration University of Zurich, Switzerland

Diamond instruments for direct tooth-coloured adhesive restorations Direct restoration techniques require preparations that give primary importance to efficiency and precision. The definitive fracture-free preparation of margins plays a key role in finishing, particularly in the case of adhesive restorations. This makes the rotating and oscillating instruments designed for use with these techniques an essential aid.

­36

Product description n 4 cylindrical burs, ISO sizes 010 and 014, head length 5mm, in 80 and 25µm grits, for preparing and finishing cavities. n 1 small cylindrical bur, ISO size 009 and 2 ball burs, ISO sizes 010 and 012, in 80µm grit produce very small access cavities occlusally for adhesive preparations. n 3 tapered burs, short and long, ISO sizes 010 and 012, in 40 and 8µm grits for finishing enamel margins and contouring and prepolishing tooth-coloured restorations. n 1 ball bur, ISO size 024, in 40µm grit, for contouring palatal and occlusal filling surfaces. n 1 Proxoshape file PS2, in 40µm grit for contouring proximal filling margins.

Indication Preparation of cavities for esthetic adhesive fillings in anterior and posterior teeth Benefits n Sharp-edged and fracture-free margins n Invisible tooth-coloured restorations n Method clinically tested by the University of Zurich

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

1

1

2

2

1) The image, 20x magnified, shows the specific design of the working head 2) Finishing of the shoulder without damaging the lateral abutment 3) Finishing of the cervical cavity shoulder

3

3

4

1) Preparation of the access cavity MOD with instrument FG 8714 2) Preparation of an undermining palatal filling cavity with instrument FG 8200S 3) Finishing and beveling of preparation margins with instrument FG 9205 in ultra fine grit 4) Finishing of a minimal invasive occlusal cavity with instrument FG 4205

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

37

Intensiv Inlay Set University of Zurich, Switzerland

Diamond instruments for classic inlay preparations Classic inlay restorations require simple precise preparation involving circular right-angled margins, accurate edges, without bevelling. In this perspective, an ideal cavity can be prepared in just two steps.

Product description n 3 tapered burs, ISO sizes 016 / 019 and 023, head length 6.0 and 8.0mm, in grit 80µm for classic inlay cavity preparations. n 3 matching burs in 25µm grit for finishing enamel margins.

Indication Preparation and finishing of cavities for classic inlays on premolars and molars Benefits n Clinically tested method at the University of Zurich n Optimal adaptation and perfect margins n Free of enamel fractures n Reduced number of burs for highquality inlay cavity preparations

Intensiv Cerinlay Set University of Berlin, Germany

Special diamond instruments for inlay cavity preparations according to methods developed by the University of Berlin Restorations using ceramic inlays require simple preparations with rounded interior edges and sharp cavity margins without bevelling. The slightly tapered shape and suitable small diameters of these burs make undercut-free cavity preparation possible.

­38

Product description n 4 tapered burs with rounded edges, ISO sizes 014 and 018, head lengths 6.0 and 8.0mm, in 80µm grit for cavity preparation. n 4 shape and dimension matching burs in 25µm grit for finishing fracture-free cavity margins.

Indication Preparation and finishing of ceramic inlay cavities for premolars and molars Benefits n Preparation method clinically tested at the University of Berlin n Finishing of fracture-free enamel margins n Split-free marginal integration of inlays

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

1

1

1) Cavity preparation with instrument FG 8113R 2) Cavity finishing with instrument FG 3113R

2

2

3

1,5 mm

4

1,5 mm

1) Ceramic inlay cavity preparation with instrument FG 8526 2) Cavity finishing with instrument FG 3526 3) Cavity finishing with instrument FG 3525 4) Minimum diameter of the ceramic inlay 1.5mm 5) Minimum height of the ceramic inlay at the fissure 1.5mm

5

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

39

Intensiv Combi Prep Set: Indirect Restoration University of Zurich, Switzerland

Diamond instruments for indirect tooth-coloured adhesive restorations In indirect restoration techniques, efficiency and precision are the key factors in preparation. Definitive fracture-free margins play a key role in finishing, particularly in the case of adhesive restorations. This makes the rotating instruments developed for these techniques important tools.

­40

Product description n 4 cylindrical burs, ISO sizes 010 and 014, head length 8.0mm with rounded edges, in 80 and 25µm grits, for preparing and finishing inlay cavities and for crown preparations. n 4 matching burs with shortened head length of 5.0mm enable comfortable preparations even in the distal areas. The shape and dimensional matching of the finishing burs ensures an exact cervical fit in crown preparations. n Tapered and pointed bur, ISO size 016, in 80µm grit for separation. n Egg-shaped bur, ISO size 031, in 80 and 25µm grits for occlusal reduction and the preparation and finishing of palatal parts. n 2 tapered burs, ISO sizes 016 and 022, head lengths 6.0 and 8.0mm with rounded edges and 4° cone angle, in 25µm grit for occlusal opening of box cavities. n 1 small tapered bur, ISO size 010, head length 8.0mm for opening of deep proximal boxes. n 4 torpedo burs, ISO sizes 010 and 014, head length 10.0mm, in 80 and 25µm grits, are designed for preparation and finishing of labial surfaces in veneer preparations.

Indications Preparation of inlays, crowns and bridges, and veneers Benefits n Sharp-edged, fracture-free preparation margins n Invisible tooth-coloured restorations n Method clinically tested by the University of Zurich

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

1

2

5

6

3

4

7

8

1) Preparation of the inlay cavity with instrument FG 8714 2) Finishing of the inlay cavity with parallel walls with instrument FG 3614B 3) Finishing of the inlay cavity with the 4째 tapered instrument FG 3113NR 4) Finishing of the proximal cervical inlay cavity margin with instrument FG 3116 5) Crown preparation with instrument FG 8714 6) Finishing of the crown preparation with the shape and dimensional matching instrument FG 3714B 7) Veneer preparation with instrument FG 8040 8) Finishing of the veneer preparation with instrument FG 3040SB

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

41

Advanced Prep & Finishing Set for Cerec Restorations Prof. Dr. W. H. Mörmann and Dr. A. Bindl, University of Zurich, Switzerland

Diamond instruments for inlays, partial and full crowns, and fixed restorations Both bur sets fulfill in an ideal manner all the requirements for superior multipurpose preparation and finishing goals created by Cerec 3 technology.

Product description Inlay cavities and partial crowns: n 4 cylindrical burs, ISO sizes 011 and 014 with rounded edges and head lengths of 5, 6, and 8mm in grits 80 and 25µm for the preparation of precise inlay cavities and finishing of box margins while avoiding enamel fractures, as well as for partial crown preparation. n Tapered burs, ISO size 018, with rounded edges in 25µm grit for minimal occlusal enlargement of the box. n 1 thin, tapered bur, ISO size 010 in 25µm grit for finishing deep proximal boxes.

Crown Preparation: n 1 needle tapered bur, ISO size 012 for separation. n Cylindrical and conical truncated burs with rounded edges, ISO sizes 014 and 016, as well as torpedo burs, ISO size 014 in grits 80 and 25µm for circular preparations and finishing of chamfer and shoulder preparations. The torpedo burs are also used for the preparation and finishing of veneer restorations. n 1 football bur, ISO size 022 with tip, 80µm grit for occlusal reduction and preparation of labial parts. n Shape and dimension matching bur with round tip, ISO size 021, 40 µm grit, for finishing labial preparation surfaces.

­42

Finishing: n 4 flame burs, head lengths 3 and 5mm, ISO sizes 012 / 013 / 014 in 40 and 8µm grit for contouring and finishing of the CAD/CAMgenerated occlusion. n 1 ball bur, ISO size 009, in 60µm grit for the preparation of minimal access cavities. n 1 ball bur, ISO size 012, for placement of the preparation borders on the gingival margin in veneer restorations. n 2 balls, ISO size 024, in 40 and 8µm grit for finishing and prepolishing of palatal concavities.

Indications n Cavity preparation for inlay and partial crowns and for full ceramic bridges in zirconium oxide n Contouring and finishing of the CAD/CAM-generated occlusion Benefits n Precise cavity contours for optical identification n Preservation of healthy tooth substance n Prepolishing with reduced roughness depth n Method clinically tested by the University of Zurich

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

1a

3

1b

2a

4

2b

5

1a) Shoulder preparation on tooth 21: The circular shoulder is structured with a plane front face using the conical diamond (FG 8422). The shoulder width is approx. 0.8mm 1b) Finishing the preparation: the tooth stump is finished with the fine grit cylindrical diamond (FG 3614B) 2a) Preparation of chamfer on tooth 11: The circular chamfer is prepared with the long cylindrical diamond (FG 8040) 2b) Finishing the preparation: the tooth stump is finished with the fine grit, cylindrical diamond (FG 3040B) 3) Shoulder preparation: defect-oriented crown preparations on molars and premolars after finishing for adhesive attachment of full ceramic Cerec crowns 4) Defect-oriented partial crown preparation to be treated with a Cerec restoration 5) Veneer prepara足 tions on the lateral incisor teeth without inclusion of the incisal edges

Advanced Prep Set for Cerec Restorations

Advanced Finishing Set for Cerec Restorations

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

43

Cerec Set Prof. W. H. Mörmann, University of Zurich, Switzerland

Diamond instruments for Cerec restorations Cerec preparation requires no tapering of the cavity walls and enables therefore a tooth-friendly cavity preparation. These burs fully meet the requirements.

Product description n 1 cylindrical bur, ISO size 014, head length 6.0mm, in 106µm grit for cavity preparation. n 1 cylindrical bur, ISO size 011, head length 6.0mm, in 25µm grit for finishing the cavity margins. n 2 tapered burs, ISO sizes 010 and 018, in 25µm grit for slight occlusal enlargement of the cavity. n 1 torpedo bur, ISO size 011, head length 10.0mm in 40µm grit for substance-preserving veneer preparation. n 2 inverted cone burs with rounded edges, in 40 and 8µm grit for occlusal contouring. n 1 bud-shaped bur, in 8µm grit for fissure contouring.

Indication Preparation and finishing of inlay and veneer cavities for the Cerec method Benefits n Precise cavity contouring for optical recognition n Preservation of healthy tooth substance n Prepolishing with reduced roughness depth n Clinically tested treatment method by the University of Zurich

Intensiv Modular Veneer Set Dr. A. Schöler, Biel, Switzerland

Diamond instruments for Veneer preparations Ceramic veneers are generally seen today as a minimal invasive and long lasting reconstruction form. Tooth preparation defined and restricted to the enamel is a prerequisite for permanent, tooth-friendly veneer placement.

­44

Product description n 1 ball bur, ISO size 009, 60µm grit, for defining the preparation margins. n 1 pilot bur S4, for a depth specification of 0.4mm labially. n 1 tapered bur FG 101 with tip for removing the enamel residue labially. n 1 torpedo bur FG 4310S in 40µm grit for finishing the preparation margin. n Flame, egg-shaped, and needle burs in 40 and 15µm grits for finishing and prepolishing the proximal, gingival, and palatal margin area.

Indication Preparation of veneers Benefits n Maintenance of the recommended penetration depth of 0.4 mm n Complete bur set for veneer preparations

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

1

1

2

3

4

5

2

3

4

5

1) Axial preparation of the cavity walls with instrument FG 414 2) Finishing of the cavity walls with instrument FG 3414 3) Controlled reduction of the vestibular surface with instrument FG 4310 4) Finishing of the occlusal surface with instrument FG 4323 5) Finishing of the restoration margins and fissures with instrument FG 9274

1) Definition of the cervical preparation margin with instrument FG 200S 2) Preparation of the diagnostic grooves with instrument FG S4 3) Vestibular reduction with instrument FG 101 4) Finishing of the cervical preparation margin with instrument FG 4310S, without changing the labial preparation surface 5) Final preparation

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

45

Berner Uni Prep Set University of Bern, Switzerland

Diamond instruments for the preparation of restorations (cast fillings) and crowns This Intensiv diamond bur set was specially designed for efficient and tooth caring preparation of cast fillings (in-/overlays) and crowns. No further burs should usually be needed in routine preparations.

Product description n 5 tapered burs, ISO size 014 and 017, in 40 and 125µm grits with head lengths of 8.0 and 10.0mm for the preparation and finishing of cavities for cast fillings (inlays/ overlays). n 4 torpedo instruments, ISO size 011, in 40 and 15µm grits for abutment preparation and finishing for crowns. n 2 football burs in 125 and 40µm grits for preparation and finishing of palatal crown parts. n 1 flame bur, ISO size 010, in 40µm grit, for finishing of filling margins and for bevelling of preparation borders.

Indications n Restoration: Cavity preparation for posterior cast fillings n Prosthetics: Abutment preparations for crowns and bridges Benefits n Sharp preparation edges n Preparation method clinically tested by the University of Bern

Geneva Prep Set University of Geneva, Switzerland

Diamond instruments for crown and bridge prosthetic restorations Burs for classic crown and bridge restorations according to methods developed at the University of Geneva.

­46

Product description n 1 round and tapered bur FG D16, ISO size 012, head length 7.0mm, 90µm grit for proximal separation. n 3 round and tapered burs FG 235, 237 and 240, ISO sizes 018, 022, 023, head lengths 8.0 / 10.0 / 11.0mm, 106µm grit for axial and incisal or for occlusal reduction. n 2 round and tapered burs FG D6 and 235, ISO sizes 016 and 018, head lengths 10.0 and 8.0mm, 106µm grit for interproximal axial reduction. Axial reductions are linked with the preparation of a defined chamfer. n 1 football bur FG 255, ISO size 023 with 106µm grit designed for palatal reduction. n 2 tapered burs FG D8GB and FG D7GB, ISO sizes 016 and 025, 50µm grit for finishing abutments.

n 1 bur FG 274GB, ISO size 016, 50µm grit for finishing or cervical chamfer.

Indication Abutment preparation for crowns and bridges Benefits n Reduced number of burs for complex preparation procedures n Method tested by the University of Geneva

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

1

1) Finishing of the cavity margins with instrument FG B5 2) Palatal reduction with instrument “Football� FG B4

2

1

2

3

4

5

6

1) Insertion of an interdental wedge cervically and separation with instrument FG D16 2) Preparation of diagnostic grooves with instrument FG 237 and axial circular and incisal reduction with instruments FG 235, 237 or 240 3) Interproximal axial reduction with instruments FG D6 and 235 4) Palatinal reduction with instrument Football FG 255 5) Finishing of the crown abutment with instruments FG D8GB and D7 6) Finishing or incisal contouring as well as cervical chamfer with instrument FG 274GB

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

47

St. Moritzer Crown & Laminate Prep Set Prof. Ch. Hämmerle and Dr. Sailer, University of Zurich, Switzerland

Diamond instruments for the preparation of veneers, crowns and bridges The multiplicity of dental laboratory materials today requires the use of universal preparation burs.

The St. Moritzer Set meets all current requirements for preparation approaches and allows every user to obtain premium quality in the results.

Product description Veneer preparation: n 1 tapered bur FG D3, ISO size 012, 90µm grit for separation.

n 1 conical bur with rounded end, ISO size 015, 50µm grit for substancepreserving labial, incisal and lingual reduction and the preparation of a 0.5mm wide chamfer.

Crown preparation: n 1 tapered bur FG D3, ISO size 012, 90µm grit for separation. n 2 torpedo burs ISO sizes 012 and 013, in 90 and 40µm grits for circular abutment preparation and finishing of a 1mm wide round chamfer. n 2 football burs, ISO sizes 023 and 022 for preparation and finishing of the palatal area. n 1 bur with 3° cone, ISO size 015, 15µm grit, for precise finishing of the axial walls and shoulders for CAD/CAM-generated restorations.

ZrO2 adhesive bridge preparation: n Preparation with separation instruments FG D3, ISO 012, 90µm grit. n Conical instruments FG D18GB, for final preparation of mesial and distal guiding grooves. n Ball bur FG 201, ISO size 018, for the preparation of a vertical rest.

Indications Preparations for: n Veneers, crowns and bridges n Full ceramic or metal-ceramic restorations n CAD/CAM restorations n Adhesive bridges Benefits n Clinically tested by the University of Zurich n Reproducible premium quality results n Preservation of healthy tooth substance

Intensiv Profi Prep Set Prof. Marinello, Dr. Zitzmann, University of Basel, Switzerland

Diamond instruments for fixed and removable prosthetics These burs are exactly matched with respect to their shape, head length, diameter, and grit size. All current indications in fixed and removable prosthetics can be met.

­48

Product description n Cylindrical and chamfer burs for shoulder and chamfer preparation. n Long and short burs with 1.3mm diameter for different abutment lengths. n Narrow finishing diamond, 1.1mm diameter for proximal areas with limited space and for proximal wrap-around in veneer preparations. n Fine grain football instrument for lingual contouring of the anterior teeth and occlusal reduction of posterior teeth, as well as for concave, buccal reduction in root coping preparations. n Separating diamond for interproximal separation and preparation of notches and guiding grooves in adhesive prosthetics. n Ball diamond bur (diameter 1.0 mm) for preparation of occlusal rest seats in adhesive and removable prosthetics.

Indications n Preparations for crown and bridge prosthetics such as metal-ceramic and full ceramic crowns as well as inlays and veneers n Adhesive prosthetics n Partial denture prosthetics: - Cast clasps - Root copings Benefits n Shape and dimension coherence of the preparation instruments n Superior finishing of prepared cavities n Preservation of healthy dental substance

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

1

2

3

4

5

6

7

8

9

1

2

3

4

5

6

7

8

9

1) Initial interdental preparation for veneers with instrument FG D3 2) Vestibular reduction with chamfer preparation with instrument FG D18GB 3) Circ­ ular shoulder preparation with instrument FG 305L 4) Finishing of the abutment preparation with instrument FG 4307N 5) Finishing of the abutment for CAD/CAM-generated reconstruction with instrument FG 5423 with 3° cone and extra fine grit 6) Palatal reduction with football instrument FG 250 7) Prepara­ tion of mesial and distal guiding grooves. Separation instruments FG D3 8) Final preparation of guiding grooves with FG D18GB 9) Preparation of vertical rest in cingulum area with FG 201

1) Separation with instrument FG 80D3 2) Preparing diagnostic grooves with FG 8305LP 3) Finishing of the shoulder preparation with instrument FG 4325L 4) Finishing of proximal surfaces with instrument FG 4305L 5) Palatal reduction with the fine Football instrument FG 4255 6) Final polishing of the preparation with the extra fine instrument FG 5315L 7) Preparation of a mesial guiding groove for an adhesive retainer with instrument FG 80D3 8) Buccal concavity of a root-cap prepared with the fine instrument FG 4255 9) Circular preparation with the fine instrument FG 4310B

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

49

Shoulder Bevel Prep Set Dr. A. Schöler, Biel, Switzerland

Diamond instruments for crown preparations with shoulder and bevel This preparation method requires burs that enable fast, controlled tooth substance reduction and polishing of the preparation margins, as commonly found in shoulder bevel preparations.

Product description n 1 flame/tapered separation bur, FG 101C, ISO size 014, 125µm grit. n 1 ball bur, ISO size 021, 125µm grit for preparation of the circular shoulder. n 1 double cone bur FG 241, ISO size 037, 106µm grit for occlusal reduction. n 1 football bur FG 255, ISO size 023, 106µm grit for preparation of palatal parts. n 2 cylindrical burs with rounded frontal side, ISO sizes 015 and 020, 106µm grit for circular shoulder preparation. n 2 shape and dimension matching burs, 50µm grit for finishing. n 2 burs FG D01 and D02 with guiding edge for developing a defined bevel.

n 2 needle burs ISO sizes 009 and 007, 50 and 15µm grits, with 4.0mm head lengths for finishing and prepolishing of the preparation margins Indication Crown preparations with shoulder and bevel Benefit n Preparation with defined penetration depth

Uniprep Set Crowns & Bridges Prof. Dr. C. Marinello, Universities of Zurich and Geneva, Switzerland

Diamond instruments for crown and bridge prosthetics Instruments for the rational preparation of crown and bridge restorations. This set, specially designed for educational purposes, is limited to 10 FG shapes for the practitioner.

­50

Product description n 1 needle taper bur FG 30, ISO size 012, head length 11.0mm, 80µm grit for separation. n 3 cylindrical and chamfer burs FG 31, 32 and 33, ISO sizes 012 and 013, 90µm grit for chamfer and shoulder preparations in full and partial crown restorations. n 1 football bur for preparation of palatal parts. n 4 shape matching burs, 40µm grit for finishing preparation surfaces. n 1 short cone bur in 40µm grit for beveling.

Indication Preparation of abutments for full and partial crowns and bridges Benefit n Reduced number of burs required for complex preparation procedures

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

1

1

2

2

3

3

4

4

1) Separation and definition of the shoulder preparation margin with instruments FG 101 C and 201 C 2) Occlusal reduction with instrument FG 241 3) Palatal reduction with instrument FG 255 4) Circular shoulder preparation with instrument FG 315S or 315L

1) Separation with instrument FG 30 2) Preparation of diagnostic grooves (depth specification) with instrument FG 31 3) Bevelling with instrument FG 4035 4) Shoulder preparation with instrument FG 33

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

51

Intensiv Amalgashape Set University of Zurich, Switzerland

Diamond instruments in fine grits for finishing and prepolishing amalgam fillings Finishing of amalgam fillings is a basic procedure in restorative dentistry.

Preservation of the tooth is essential and enamel and filling fractures must be avoided to prevent infiltration and secondary caries.

Product description n 2 flame burs, short and long, ISO sizes 014 and 012, in 40 and 25µm grits, for fissure finishing. n 1 inverted cone, ISO 013 with rounded edges for contouring of fissures with adjoining cusps. n 1 football bur, ISO 021, and 1 ball bur, ISO 017, for special finishing of occlusal surfaces. n Shape and dimension matching burs in 25µm grit for finishing and prepolishing of amalgam fillings.

Indications n Contouring and finishing of amalgam fillings n Recontouring of existing amalgam fillings n Finishing of cavity margins in enamel and dentin Benefits n Significant reduction of enamel and filling margin fractures n Optimal marginal adaptation n Compact filling margins

Intensiv Composhape Set 1 University of Zurich, Switzerland

Diamond instruments in extra fine grits for contouring and finishing composite fillings Contouring and finishing of composite fillings is an important step in restorative dentistry. Tooth substance must be preserved and enamel and fillings fractures avoided to prevent infiltrations and secondary caries.

­52

Product description n 3 flame burs, ISO sizes 010 / 012 and 014; 1 football bur, ISO size 021, and 2 ball burs, ISO sizes 017 and 024 in 40µm grit for nondestructive finishing of fissures and filling margins of anterior and posterior composite fillings. n Shape and dimension matching burs in 15µm grit for finishing enamel margins in adhesive preparations, finishing fissure and extended fissure sealings.

Indications Contouring and finishing of n Composite fillings in anterior and posterior teeth n Extended fissure sealings with flowable composites n Enamel margins in adhesive preparation (15µm) Benefits n Significant reduction of enamel and filling margin fractures n Smooth filling surfaces ideally prepared for the high gloss polishing n Clinically tested by the University of Zurich

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

1

1

2

2

3

3

4

4

1) Initial contouring of the filling with instrument FG 4205 2) Contouring of fissures with instrument FG 3274 3) Finishing of the main fissure and the adjoining cusps with instrument FG 3223 4) Finishing of the main fissure with instrument FG 4201

1) Proximal and subgingival finishing with instrument FG 4062 2) Finishing of occlusal filling surfaces with instrument FG 4255 3) Finishing of the filling margin with instrument FG 4205 4) Finishing of central fissures with instrument FG 4201

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

53

Intensiv Composhape Set Anterior & Posterior University of Zurich, Switzerland

Diamond instruments in extra fine grits for finishing composite fillings, according to the demands on posterior fillings Finishing of adhesive restorations must be non-destructive and tooth surfaces must be carefully prepared for the final polishing. Use of these burs preserves far more tooth substance than that obtained with conventional finishing burs. Fractures of enamel and composite margins are significantly less common. A greater amount of perfect margins is therefore produced.

Product description n 2 flame burs, short and long, ISO sizes 014 and 012, 40µm grit for fissure finishing. n 1 inverted cone, ISO size 013, 40µm grit with rounded edges for contouring of fissures with adjacent cusps. n 1 football bur, ISO size 021 and 1 ball bur, ISO size 017, 40µm grit for special contouring of occlusal and palatal filling surfaces. n Shape and dimension matching burs in 15µm grit for finishing and prepolishing of tooth-coloured restorations.

Indications Finishing of: n Composite fillings in anterior and posterior teeth n Composite and ceramic inlays and veneers n Extended fissure sealings with flowable composites n Enamel margins in adhesive preparations Benefits n Significant reduction of enamel and filling margin fractures n Perfectly smooth filling surfaces ideally prepared for the gloss polishing n Tested clinically by the University of Zurich

Intensiv Combi Prep Set: Contouring and Finishing Set University of Zurich, Switzerland

Diamond instruments for finishing of esthetic restorations In current restoration techniques, the quality of the generated surface is the key factor at the contouring and finishing stage. This makes the rotating and oscillating instruments developed for these techniques of prime importance.

­54

Product description n 4 flame burs, ISO sizes 012 and 014, head lengths 3 and 5mm, in 40 and 8µm grits for contouring and prepolishing composite fillings. n 1 cylindrical bur, ISO size 011, 8µm grit enables non-destructive contouring of the margin of ceramic and composite restorations. n 1 football bur in 80µm grit size for composite surface contouring. n 1 ball bur, ISO size 033, 8µm grit for finishing and prepolishing palatal filling margins. n 2 oscillating instruments, PS2S and PS9S, in 40 and 8µm grits for contouring and prepolishing proximal fillings. n 2 oscillating instruments, RS40 and RS9, in 40 and 8µm grits for concave filling margins on proximal concavities.

Indication Finishing of adhesive restorations in the anterior and posterior areas Benefits n Exact contouring of composite margins n Creation of fine composite surfaces ideally prepared for final polishing n Method clinically tested by the University of Zurich

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

1

1

2

2

1) Finishing of the fissures with FG 5274 2) Finishing of the occlusal filling surfaces with instrument FG 4201 3) Finishing of the palatal filling surfaces with instrument FG 4250

3

3

4

1) Finishing of the cervical restoration margin with the file PS2 2) Surface structuring of occlusal composite fillings with instrument FG 8255 3) Contouring of occlusal aesthetic restoration surfaces with instrument FG 4205 4) Prepolishing of palatal filling surfaces with instrument FG 9401 in ultra fine grit

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

55

Intensiv Perio Set Prof. K.H. Rateitschak, University of Basel, Switzerland

Diamond instruments for odontoplasty and mechanical root planing in periodontal treatments Some important interventions in the treatment of periodontitis include the cleaning and polishing of the root surface. Supragingival and subgingival plaque as well as calculus and superficial endotoxin-containing cementum layers must be thoroughly removed. These are absolute preconditions for the complete healing and regeneration of the periodontal tissue.

Product description n 12 burs with tapered and flame heads, ISO sizes 012, 014 and 016, in grits 75, 40 and 15µm, with either a short or long neck for each unit. They provide a supplement to the mechanical instrumental treatment of periodontitis. n The coarse 75µm burs are used only in odontoplasty, for furcation enlargement and narrow root concavities. n The fine grit 40µm burs are used for depuration of root surfaces. The two shapes enable root cleaning even in morphologically difficult areas. n The 15µm burs are used for the final planing.

These burs are available only in RA and are used at rotation speeds of 6000 rpm, with reduced pressure application.

Indications n Mechanical removal of supragingival and subgingival concrements n Periodontal surgery (depuration of exposed root surfaces) n Root planing n Odontoplasty Benefits n Homogeneous smooth root surfaces n Better access to difficult areas (furcations, root concavities, deep periodontal pockets)

Intensiv Rootshape Set University of Bern, Switzerland

Oscillating diamond-coated files for tissue-sparing root planing Checking for and removal of soft microbiological plaque, concrements, and filling excesses on the root surface are considered today the essential aspect of the periodontal therapy. The Rootshape files are ideal tools for this type of treatment.

Product description n Flexible files in two different lengths (11 and 16mm) with spoon-shaped working ends that are diamond coated on their convex side. n Grits: 40, 15, and 4µm To be used in combination with KaVo head 61 LRG or KaVo contra-angle Intracompact 2061 CHC.

­56

Indications n Supragingival and subgingival plaque removal n Root planing n Odontoplasty Benefits n Easy access to morphologically difficult areas n Superior tactile detection of deposits and excesses n Controlled pressure application thanks to flexible files

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

1

1

2

3

4

5

2

3

1) Root planing in open treatment with instrument RA 740 2) Removal of subgingival concrements in closed treatment with instrument RA 415 3) Removal of subgingival concrements and plaque in posterior tooth with instrument RA 740 4) Root planing in open treatment with instrument RA 515 5) Root planing in open treatment with instrument RA 540

1) Ideal adaptation of the convex working part to the concave natural root surfaces 2) The length and shape of the file allow the treatment in areas which are morphologically of difficult access 3) The shape of the file ideally adapts to the root surface

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

57

Intensiv Proxoshape Set Universities of Zurich and Bern, Switzerland

Oscillating diamond-coated files for the removal of overhangs and finishing of proximal filling surfaces Optimally adapted and polished proximal filling surfaces or crown margins are a prerequisite for health maintenance of the periodontium and prevention of secondary caries.

Proxoshape meets the requirements for precise finishing of the filling surfaces and margins and prepares them for final polishing.

Product description n 4 files for precise adaptation to tooth shape, one-sided diamondcoating along the entire head length, 4 different grits (125, 90, 40 and 15µm) n 1 Diakleen Diamond Cleaning Rubber Block, Ref. 6000 n 1 Ejector Ref. 051B To be used in combination with KaVo head 61 LRG or KaVo contra-angle Intracompact 2061 CHC.

Indications n Removal of: Filling and cement overhangs n Finishing and trimming of: proximal crown margins in gold or ceramic n Contouring and finishing of: proximal restoration surfaces Benefits n Easier access to the interdental space n No iatrogenic damage to adjacent teeth n Prevention of surface wave generation caused by rotating burs

Intensiv Proxoshape Set Optional Universities of Zurich and Bern, Switzerland

Oscillating diamond-coated files for the removal of overhangs and finishing of proximal filling surfaces Optimally adapted and polished proximal filling surfaces or crown margins are a prerequisite for health maintenance of the periodontium and prevention of secondary caries.

Proxoshape meets the requirements for precise finishing of the filling surfaces and margins and prepares them for final polishing.

Product description n 4 files as in the Proxoshape Set. n 3 files with extended working area (grits 90, 40 and 15µm) n 2 narrow files, 40 and 15µm grits. n 1 distal diamond-coated file in 15µm grit, special file PS3G for polishing root surfaces with difficult access.

To be used in combination with KaVo head 61 LRG or KaVo contra-angle Intracompact 2061 CHC.

­58

Indications n Removal of: Filling and cement overhangs n Finishing and trimming of: proximal crown margins in gold or ceramic n Contouring and finishing of: proximal restoration surfaces Benefits n Easier access to the interdental space n No iatrogenic damage to adjacent teeth n Prevention of surface wave generation caused by rotating burs

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

1

1

1) Finishing of the filling in the proximal area with file PS2 2) Contouring of the surface below the restored contact point without damaging the adjacent tooth with file PS3

2

2

3

4

1) Finishing of the cervical filling margin with instrument PS2L 2) Finishing of proximal composite filling with instrument PS2 3) Removal of proximal filling excesses of amalgam restorations with instrument PS1 4) Removal of proximal filling excesses of amalgam restoration with instrument PS1 (buccal perspective)

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

59

Intensiv ProxoStrip Pat. pend. N° 2007 0219/07 Scientifically tested by the University of Ancona, Italy

A unique, diamond-coated metal strip for the final polishing of proximal surfaces Practical, fast, ergonomic!

Product description n A metal strip, diamond-coated on one side, with two working areas of different grit sizes: 40µm (red) and 15µm (yellow) n Grip secure strip ends, perforated and ergonomically designed n Height: 2.5mm n Total length: 80mm n Thickness: 0.05mm n Sterilizable, reusable

Intensiv ProxoStrip is a unique double diamond-coated metal strip with two working areas with a grit of 40µm (red) and 15µm (yellow) respectively and perforated strip ends for a secure and ergonomic grip. The total length of the strips (80mm) enables simplified finger support (hypomochlion) during treatment. The 2.5mm height of the strip as well as the free zone between the working areas preserve the existing contact point.

Intensiv s

6 pcs siv.ch inten .ch info@intensiv www.

012

0

Ref. PX

trip

ProxoS

nd. N.

Pat. Pe

Benefits n Finishing and polishing in one process n Ergonomic grip for simple, safe use n Short strip for improved finger support while stripping n Clinically perfectly polished proximal surfaces

19/07

2007 02

2

4015/1

s

ed strip d coat Diamon/ 15 µm 40 µm

12 pcs

trip

siv SA cia Inten Gran 6916erland Switz

Intensiv

19/07

2007 02

roxoS nsi40v15P/12 te InRe f. PX

4015/6

nd. N.

Pat. Pe

ed strip d coat Diamon/ 15 µm 40 µm

trip

roxoS nsi40v15P/6 te InRe f. PX

Ref. PX

trip

ProxoS

Indications n Finishing and polishing of fillings and crown borders in proximal areas n Removal of excess material and overhangs in filling surfaces and crown borders n Beveling in adhesive restorations in the proximal cervical areas

siv SA cia Inten Gran 6916erland Switz

siv.ch inten .ch info@intensiv www.

012

0

Intensiv UniglossPaste Clinically tested and scientifically approved by the University of Zurich, Switzerland

One step universal extra fine grit diamond paste with uniquely surface adapted micro grain for high gloss shining of all aesthetical restorations Perfectly smooth and shiny surfaces of fillings and restorative prosthesis treatment continue to be the essential requirement for all long lasting oral restorations as well as the general improvement of aesthetical considerations: Intensiv UniglossPaste, thanks to its special formula of micro grit diamond with all its specific features, represents the ideal universal product for the finishing of aesthetical restorations.

­60

Product description n Polishing paste with a significant proportion of ultrafine granulated natural diamonds, in its composition adapted to the surface roughness of aesthetical restorations n The selected mixture of the diamond grits represents the first range of the ultra fine diamond granulate n The composition of Intensiv UniglossPaste contains specific substances which guarantee a thixotropic effect n Blue paste without any odour nor taste

Indications n Final polishing and high gloss shining for the surfaces of all aesthetic dental materials n Maintenance of existing aesthetic restorations Benefits n Can be used with either standard nylon bristle junior cup brush or Prophylaxis rubber cup – without splattering n Fast high gloss polishing in 15 seconds only n Surface roughness of treated surface similar to that of natural enamel n Only one paste for treatment of all aesthetic dental materials n Scientifically proven and clinically tested results

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

1

2

3

4

5

6

1) Initial view of the clinical case 2) Perforated strip ends for a secure and ergonomic grip 3) The uncoated zone allows the introduction of the strip in tight proximal areas, as well 4) For the bevelling both the red and the yellow working part can be used 5) The yellow working part is well-suited for a clinically perfectly polished proximal surface without impairing the contact point 6) Final treatment/result

Ref. PX 4015/6 Package of 6 Strips

1:1

Ref. PX 4015/12 Package of 12 Strips

1-6) Clinical pictures: Dr. S. Giani, University of Insubria, Varese, Italy 1

2

3

4

5

6

Ref. 2500 Package with syringe of 2.5g Ref. 2510 Package with 25 blisters of 0.2g

1:1

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

Ref. 2500

61

Intensiv Cavishape Set, Intensiv Cavishape Set S University of Bern, Switzerland

Oscillating diamond files for finishing preparation margins It is highly important in the preparation and finishing of cavity margins that the surfaces be fully smooth and even. Both in vivo and in vitro studies have demonstrated that Cavishape files are superior to standard hand tools (“axial cavity trimmers“) and even to vibratory instruments – they help prevent enamel fractures. Preparation margins finished with Cavishape files are precise while adjacent teeth are preserved.

Product description n Highly flexible, 45° tip angle, onesided diamond coated files n 2 widths (1 and 1.5mm) and 2 grits (40 and 25µm) n Rigid files (Set “S”) 90° tip angle, in 1.5mm width and 2 grits (40 and 25µm) To be used in combination with KaVo head 61 LRG or KaVo contra-angle Intracompact 2061 CHC.

Indications Finishing of box preparations (Class II) n Slots, minifillings, fillings n Adhesive restorations (ceramic, composite) n Cerec preparations (especially Set S) Benefits n Precise, preserving finishing of preparation margins n Smooth homogeneous preparation surfaces n No iatrogenic damages to the adjacent teeth

Intensiv Bevelshape Set University of Bern, Switzerland

Oscillating diamond files for perfect bevelled edges and preparation margins A key factor for an ideal cavity preparation for composite fillings, gold inlays and overlays is a precise margin beveling with sharp edges. In the case of prosthetic restorations, the margin finishing of shoulder preparations and the bevelling of chamfer preparations are decisive for the quality of the result. The single-side diamond coating helps to prevent iatrogenic damage to adjacent teeth and injury to periodontal tissue.

­62

Product description n Axially curved files with distally bent ends n 3 files diamond-coated over the entire convex working length in grits 40µm / 25µm / 15µm n 3 files diamond-coated over the convex distal end only in grits 40µm / 25µm / 15µm To be used in combination with KaVo head 61 LRG or KaVo contra-angle Intracompact 2061 CHC.

Indications n Margin bevelling for - Anterior composites - Composite slots - Inlays and onlays n Margin finishing in veneer preparations n Crown preparations - Margin finishing in chamfer preparation - Bevelling in shoulder preparation Benefits n Perfectly polished and clearly outlined profiles with perfect sharp cut edges n No microfractures and no unforeseen chipping of dental enamel prisms n Prevention of enamel defects and grooves on the preparation margin n No iatrogenic damages to adjacent teeth

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

1

2

3

4

1+2) Contouring of the round internal angles 3) Visible flexibility of the file during use 4) Opened cavity prepared with rotating instruments 5) Finished cavity margins with Cavishape

5

Cavishape Set

1

Cavishape Set S

2

3

4

5

1+2) Perfect adaptation of the file to the cavity wall and ground 3) The file allows the bevelling of a cervical shoulder, as well 4) Margin finishing in veneer preparation with BS40 or BS40T 5) Margin bevelling in class IV restorations

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

63

Intensiv Ortho-Strips System University of Zurich, Switzerland

Oscillating diamond strips for the bilateral interdental reduction of the tooth size in orthodontics (stripping) When opening the interdental space and reducing, finishing and polishing enamel in orthodontics, care must be taken to avoid grooves and scratches.

It is also important to proceed systematically, following a coarse-tofine sequence in selecting grits. Unlike manual strips, the Ortho-Strips System provides rapid, controlled enamel reduction followed by polishing without unnecessary removal of healthy tooth substance.

Product description n Flexible strips, diamond coated on both sides n 5 different grits: 90µm used as a saw for opening the interdental contact points; 60, 40, 25 and 15µm files for reduction, contouring, finishing and polishing n Available in 2 sets 060A (90, 40, 25, 15µm) and 060B (60, 40, 25, 15µm) and as single units To be used in combination with KaVo head 61 LRG or KaVo contra-angle Intracompact 2061 CHC.

Indications n Opening of the interdental contact points n Widening of the interdental spaces in orthodontics by bilateral tooth size reduction n Elimination of minor crowding and treatment finishing in orthodontics n Bilateral proximal enamel polishing Benefits n Efficient opening of the interdental contact points n Rapid and controlled reduction of the enamel n Proximal contouring, finishing and polishing of both adjacent teeth in a single procedure n No injuries to patient (lips) or dentist (fingers)

Ortho-Strips One-Sided Set University of Zurich, Switzerland

Oscillating diamond strips for the monolateral interdental reduction of the tooth size and the proximal polishing in orthodontics (stripping) When reducing, finishing and polishing enamel in orthodontics (stripping), care must be taken to avoid grooves and scratches. It is also important to proceed systematically, following a coarse-to-fine sequence in selecting grits. Unlike manual strips, the Ortho-Strips One-sided provide rapid, controlled enamel reduction followed by polishing without unnecessary removal of healthy tooth substance and leaving the adjacent teeth intact.

­64

Product description n Flexible strips, one-sided diamond coating. n 3 different grits: 40, 25 and 15µm files for reduction, contouring, finishing and polishing. n Left (“L“) and right (“R“) versions for mesial and distal in the upper and lower jaw.

To be used in combination with KaVo head 61 LRG or KaVo contra-angle Intracompact 2061 CHC.

Indications n Opening and enlargement of the interdental spaces in orthodontics without iatrogenic damage to adjacent teeth n One-sided proximal contouring, finishing, and polishing Benefits n Preservation of healthy tooth substance in the adjacent teeth n Rapid controlled reduction of the enamel n No injuries to patient (lips) or dentist (fingers)

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

1

1

2

3

4

5

2

Singly available

1) 2) 3) 4) 5)

Opening of the interdental area with OS90 Bilateral enamel reduction with OS40 Controlled enamel reduction with OS25 Finishing and prepolishing mesially with OS15 Finishing and prepolishing distally with OS15

1) Finishing of a canine mesially with OS25L 2) Finishing of a premolar distally with OS25R 3) Prepolishing of a canine distally with OS15L

3

New!

New!

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

65

Intensiv MarginShaper University of Bern, Switzerland

Oscillating diamond-coated files for beveling and cavity finishing with new arrestable shank Carefully finished cavity margins have a considerable influence on the lifespan of tooth-coloured restorations.

The universal file dimension is available in two models: with parallel and conical working part, so meeting requirements of a modern and ergonomic preparation concept.

Indications n Refined shaping and finishing of inner cavity walls n Margin beveling of cavity and crown preparations n Margin finishing of veneer and chamfer preparations n Crown preparations: margin finishing of chamfer preparations and beveling of shoulder preparations

Benefits n Quick and easy beveling of preparation margins as well as refining and finishing of inner cavity walls by means of a single instrument n No micro-fractures and no undesired chipping of enamel prisms n Avoidance of enamel defects and grooves at the preparation margin n No change of instruments required for mesial and distal sections n A prevention of iatrogenic damage to neighbouring teeth or injury of periodontal tissue is ensured by the reverse side of the instrument without diamond-coating

Intensiv Zirkon Set Clinically approved by Swiss dental laboratory Dubs, Zurich, Switzerland

Diamond-coated Instruments for Zirconium Oxide Preparations in the Dental Laboratory The manual shaping and subsequent finishing of mostly CAD/CAM prefabricated bridge and crown structures in ZrO2 ceramics requires diamondcoated instruments with chosen (specific) working part shapes and exactly co-ordinated grit sizes.

The instruments are principally applicated in the dental laboratory turbine at high speeds. Under minimal contact pressure and with sufficient water cooling (50ml/min), ceramics heat expansion is avoided. The

constantly high cutting efficiency provides an economic, and, at the same time, careful preparation of the high-strength ZrO2 ceramics.

The application of the Intensiv ZrO2 Preparation Set ensures high-quality results, which meet all the requirements for shaping and finishing modern, high-performance zirconium oxide ceramics while taking the material specific properties into account.

Benefits n Material-saving and economic preparation of zirconia appliances. n Task-specific shapes in appropriate grit sizes n Laboratory-tested instrument set for high-quality results

Indications n Shaping, elaboration and finishing of all parts of ZrO2 bridge and crown structures n Elaboration and finishing of abutments

足66

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

1-3) Clinical pictures: Klinik f端r Zahnerhaltung Uni Bern, Switzerland 1

2

3

4

5

6

1

2

3

4

5

6

7

8

1) Rough shaping of bridge structures, cone, round end of working part, FG 8238 2) Rough shaping of inter足dental areas, cone, pointed end of working part, FG 8195 3) Finishing of interdental areas, cone, pointed end of working part, FG 4195 4) Finishing of inner bridge surfaces, cylinder, round end of working part, FG 4325L 5) Rough shaping of narrow interdental surfaces and detailing of bridge structures, pointed cone, FG 113AC 6) Preparation of deep lying inner crown surfaces, long-necked ball, 8201NL 7) Preparation of Chamfer on bridge appliances, ball, FG 8201 8) Finishing of palatine surfaces on bridge appliances, bud, FG 4255A

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

67

Intensiv MarginFinisher University of Geneva, Switzerland

Diamond-coated hand instruments for the finishing of cavity margins Carefully finished cavity margins have a considerable influence on the lifespan and aesthetic appearance of tooth-coloured restorations. With the help of the diamond-coated hand instruments the margins are evenly levelled. Irregularities such as loosened enamel rods are removed.

Indication n Manual finishing of all cavity margins Benefits n The use of hand instruments ensures full tactile sensitivity n The power transmission takes place maintaining a stable balance without disturbing torques, thus ensuring fatigue-proof working

n The instruments are applied in perpendicular direction to the cavity margins, as the geometry of the diamond-coated working ends of the instruments conforms to the intended edge angle n (Red) surface without diamondcoating on the instrument working end allows for a guided application while using the neighbouring tooth as supportive structure

Intensiv PerioDiaCurette Clinically approved by Dr. Paolo Siervo, Milan, Italy

Diamond-coated periodontal curettes for manual root planing in periodontal therapy Depuration and polishing of root surfaces remains a central focus of periodontal therapy. Under unfavourable morphological conditions (root grooves, root concavities, furcations), this objective is difficult to achieve by use of standard instruments.

Diamond-coated curettes with their

incomparable tactile sensitivity of hand instruments allow for a highly improved treatment in the abovementioned situations.

Indication n Final root planing in periodontal therapy under unfavourable morphological conditions

Benefits n The use of hand instruments ensures full tactile sensitivity n The universal curette is particularly suitable in case of concavities and grooves on the root surfaces n Complete planing of the root surfaces up to homogeneity

Intensiv DiaTweezer Tweezers with diamond-coated tips. Polished and matt finishing Gripping and secure holding of small instruments, pivots, tissue residues or tooth components such as root fragments often represent a challenge to dentists due to slippery conditions.

Diamond-coated tweezer tips with their firm gripping power meet such challenging requirements.

足68

Indications n For taking up and transferring metal pivots of any kind, bone and root fragments, workpieces and small instruments as well as tissue residues n Internal gripping of crowns, telescopes and other hollow bodies with the fully diamond-coated tips n Atraumatic tissue handling in oral surgery

Benefits n Firm and secure grip through the diamond-coated inner side of the instrument tips n Secure hold of small hollow bodies with open tweezers through fully diamond-coated instrument tips n No light reflections thanks to mattfinished instrument surfaces

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

1-3) Clinical pictures: Dr. Paolo Siervo, Milan, Italy 1

2

3

1:1

Ref. MF40A, MF40P, MF40A+P (Assortment)

Ref. MF40A

Ref. MF40P

1-2) Clinical pictures: Dr. Paolo Siervo, Milan, Italy 1

2

Ref. PDC-A (Assortment)

1:1

PDC-U

PDC-13/14

PDC-11/12

1

2

3

4

PDC-F

College Tweezer polished and ribbed handles 1) Ref. 1001: diamond-coating all around 2) Ref. 1001A: inside diamond-coating only

PDC-U

Meriam Tweezer polished and ribbed handles 3) Ref. 1002: diamond-coating all around 4) Ref. 1002A: inside diamond-coating only Matt finishing: “M� in the ref.

1:1 College Ref. 1001A-M Meriam Ref. 1002

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

69

Code index FG

FG

Intensiv Code FG 01125 FG 01140 FG 01425 FG 01440 FG 01480 FG 101 FG 101 C FG 102 FG 102 C FG 102L FG 102L C FG 102L GB FG 103 FG 103 C FG 103 GB FG 104 FG 104 C FG 104 GB FG 106 FG 106 C FG 106 CB FG 109 FG 109 C FG 109 CB FG 10A FG 10A C FG 10A GB FG 111 FG 111 C FG 112 FG 113 FG 113 C FG 113 CB FG 113A FG 113A C FG 113A GB FG 113N FG 113N C FG 113N CB FG 113S FG 113S C FG 113S CB FG 114 FG 114 C FG 114 CB FG 114S FG 114S C FG 115 FG 115 C FG 115 GB FG 116 FG 116 C FG 116N FG 116N C FG 117 FG 117 C FG 117 CB FG 117 GB FG 117A

足70

ISO Code 314 150 514 011 314 150 514 011 314 150 514 014 314 150 514 014 314 150 524 014 314 586 524 014 314 586 534 014 314 313 524 042 314 313 534 042 314 586 524 016 314 586 534 016 314 586 514 016 314 586 524 018 314 586 534 018 314 586 514 018 314 586 524 021 314 586 534 021 314 586 514 021 314 171 524 014 314 171 534 014 314 171 544 015 314 171 524 016 314 171 534 016 314 171 544 017 314 068 524 034 314 068 534 034 314 068 514 034 314 041 524 040 314 041 534 040 314 304 524 031 314 171 524 018 314 171 534 018 314 171 544 019 314 164 524 018 314 164 534 018 314 164 514 018 314 172 524 023 314 172 534 023 314 172 544 025 314 172 524 029 314 172 534 029 314 172 544 030 314 110 524 014 314 110 534 014 314 110 544 015 314 110 524 012 314 110 534 012 314 225 524 018 314 225 534 018 314 225 514 018 314 172 524 012 314 172 534 012 314 172 524 014 314 172 534 014 314 172 524 016 314 172 534 016 314 172 544 018 314 172 514 016 314 164 524 014

Shape 839 839 839 839 839 898 898 825 825 898 898 898 898 898 898 898 898 898 846 846 846 846 846 846 909 909 909 818 818 825 846 846 846 852 852 852 847 847 847 847 847 847 836 836 836 836 836 807 807 807 847 847 847 847 847 847 847 847 852

Page 11 11 11 11 11 25 25 28 28 25 25 25 25 25 25 25 25 25 19 19 19 19 19 19 28 28 28 27 27 28 19 19 19 23 23 23 20 20 20 20 20 20 13 13 13 13 13 9 9 9 20 20 20 20 20 20 20 20 23

Intensiv Code FG 117A C FG 117N FG 117N C FG 117N GB FG 117S FG 117S C FG 117S GB FG 118 FG 11A FG 11A C FG 11A CB FG 11A GB FG 123 FG 123 C FG 124 FG 124 C FG 124 GB FG 124L FG 124L C FG 125 FG 125 C FG 129 FG 129A FG 130 FG 161 FG 161 C FG 161N FG 161N C FG 162 FG 162 C FG 162 GB FG 163 FG 163 C FG 164 FG 164 C FG 18 FG 181 FG 181 C FG 181 GB FG 181N FG 181N C FG 182 FG 182 C FG 182 GB FG 183 FG 183 C FG 184 FG 184 C FG 184 GB FG 185 FG 185 C FG 18L FG 19 FG 191 FG 191 C FG 192 FG 192 C FG 192 CB FG 193

ISO Code 314 164 534 014 314 172 524 018 314 172 534 018 314 172 514 018 314 164 524 016 314 164 534 016 314 164 514 016 314 225 524 016 314 068 524 039 314 068 534 039 314 068 544 040 314 068 514 038 314 210 524 018 314 210 534 018 314 129 524 012 314 129 534 012 314 129 514 012 314 131 524 016 314 131 534 016 314 129 524 014 314 129 534 014 314 057 524 053 314 059 524 053 314 040 524 035 314 297 524 012 314 297 535 012 314 297 524 014 314 297 534 014 314 297 524 016 314 297 534 016 314 297 514 016 314 297 524 018 314 297 534 018 314 297 524 021 314 297 534 021 314 219 524 016 314 298 524 012 314 298 534 012 314 298 514 012 314 298 524 014 314 298 534 014 314 298 524 016 314 298 534 016 314 298 514 012 314 298 524 018 314 298 534 018 314 298 524 021 314 298 534 021 314 298 514 021 314 298 524 023 314 298 534 023 314 220 524 016 314 219 524 012 314 299 524 014 314 299 534 014 314 299 524 016 314 299 534 016 314 299 544 017 314 299 524 018

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

Shape 852 847 847 847 852 852 852 807 909 909 909 909 886Z 886Z 885 885 885 886 886 885 885 817 817T 815 877K 877K 877K 877K 877K 877K 877K 877K 877K 877K 877K 851 878K 878K 878K 878K 878K 878K 878K 878K 878K 878K 878K 878K 878K 878K 878K 857 851 879K 879K 879K 879K 879K 879K

Page 23 20 20 20 23 23 23 10 28 28 28 28 15 15 15 15 15 15 15 15 15 27 27 27 24 24 24 24 24 24 24 24 24 24 24 23 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 23 23 25 25 25 25 25 25

FG Intensiv Code FG 193 C FG 194 FG 194 C FG 194 CB FG 198 FG 198 C FG 198 CB FG 199 FG 19A FG 19L FG 200 FG 200 C FG 200N FG 200S FG 201 FG 201 C FG 201 GB FG 201 CB FG 201N FG 201N C FG 201N CB FG 201NL FG 201NL C FG 201S FG 201S C FG 202 FG 202 C FG 202 CB FG 203 L FG 203 LC FG 204 FG 204 C FG 204 CB FG 204 GB FG 205 FG 205 C FG 205 CB FG 205 GB FG 205L FG 205L C FG 205L CB FG 205L GB FG 205S FG 205S C FG 206 FG 206 C FG 206 GB FG 207 FG 208 FG 208 C FG 208 GB FG 210 FG 210 C FG 210 GB FG 211 FG 211 C FG 212 FG 212 C FG 212 GB

FG ISO Code 314 299 534 018 314 299 524 021 314 299 534 021 314 299 544 023 314 038 524 029 314 038 534 029 314 038 544 030 314 001 524 007 314 219 524 017 314 220 524 017 314 001 524 012 314 001 534 012 314 001 524 010 314 001 524 009 314 001 524 018 314 001 534 020 314 001 514 017 314 001 544 020 314 001 524 016 314 001 534 018 314 001 544 018 314 697 524 016 314 697 534 016 314 001 524 014 314 001 534 014 314 010 524 016 314 010 534 016 314 010 544 017 314 697 524 016 314 697 534 016 314 109 524 014 314 109 534 014 314 109 544 015 314 109 514 014 314 247 524 014 314 247 534 014 314 247 544 015 314 247 514 014 314 248 524 012 314 248 534 012 314 248 544 013 314 248 514 012 314 247 524 012 314 247 534 012 314 170 524 012 314 170 534 012 314 170 514 012 314 225 524 010 314 170 524 014 314 170 534 014 314 170 514 014 314 108 524 010 314 108 534 010 314 108 514 010 314 109 524 010 314 109 534 010 314 109 524 009 314 109 534 009 314 109 514 009

Shape 879K 879K 879K 879K 811 811 811 801 851 857 801 801 801 801 801 801 801 801 801 801 801 801L 801L 801 801 805 805 805 801L 801L 835 835 835 835 860 860 860 860 861 861 861 861 860 860 845 845 845 807 845 845 845 835 835 835 835 835 835 835 835

Page 25 25 25 25 27 27 27 8 23 23 8 8 8 8 8 8 8 8 8 8 8 9 9 8 8 9 9 9 9 9 12 12 12 12 17 17 17 17 17 17 17 17 17 17 19 19 19 10 19 19 19 12 12 12 12 12 12 12 12

Intensiv Code FG 212S FG 213 FG 213 C FG 213 CB FG 214 FG 214 C FG 214 GB FG 215 FG 215 C FG 215 GB FG 215S FG 215S C FG 216 FG 216 C FG 216N FG 216S FG 217 FG 217 C FG 217S FG 218 FG 218 C FG 218B FG 219 FG 219 C FG 219B FG 219N FG 219N C FG 219N CB FG 220 FG 220 C FG 220 CB FG 220 GB FG 220S FG 220S C FG 221 FG 221L FG 222 FG 223 FG 223 C FG 223 CB FG 223 GB FG 223B FG 224 FG 224 C FG 225 FG 225 C FG 226 FG 226 C FG 227 FG 227 C FG 228 FG 228 C FG 231 FG 233 FG 233 C FG 234 FG 234 C FG 234 CB FG 234 GB

ISO Code 314 108 524 019 314 171 524 018 314 171 534 018 314 171 544 019 314 109 524 012 314 109 534 012 314 109 514 012 314 225 524 014 314 225 534 014 314 225 514 014 314 225 524 012 314 225 534 012 314 010 524 012 314 010 534 012 314 010 524 009 314 010 524 008 314 010 524 014 314 010 534 014 314 010 524 010 314 237 524 010 314 237 534 010 314 235 524 010 314 237 524 012 314 237 534 012 314 235 524 012 314 237 524 014 314 237 534 014 314 237 544 015 314 237 524 018 314 237 534 018 314 237 544 020 314 237 514 018 314 237 524 016 314 237 534 016 314 150 524 011 314 150 524 012 314 150 524 014 314 238 524 014 314 238 534 014 314 238 544 015 314 238 514 014 314 236 524 015 314 238 524 010 314 238 534 010 314 238 524 012 314 238 534 012 314 238 524 016 314 238 534 016 314 238 524 018 314 238 534 018 314 170 524 016 314 170 534 016 314 199 524 014 314 199 524 012 314 199 534 012 314 199 524 016 314 199 534 016 314 199 544 017 314 199 514 016

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

Shape 835 846 846 846 835 835 835 807 807 807 807 807 805 805 805 805 805 805 805 830R 830R 830 830R 830R 830 830R 830R 830R 830R 830R 830R 830R 830R 830R 839 839 839 830RL 830RL 830RL 830RL 830L 830RL 830RL 830RL 830RL 830RL 830RL 830RL 830RL 845 845 850 850 850 850 850 850 850

Page 12 19 19 19 12 12 12 10 10 10 10 10 9 9 9 9 9 9 9 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 19 19 22 22 22 22 22 22 22

71

FG

FG

Intensiv Code FG 235 FG 235 C FG 235 CB FG 235 GB FG 236 FG 236 C FG 236 CB FG 236 GB FG 237 FG 237 C FG 237 CB FG 237 GB FG 238 FG 238 C FG 238 CB FG 238 GB FG 240 FG 240 C FG 240 CB FG 241 FG 241 C FG 241 CB FG 243 FG 243 C FG 244 FG 244 C FG 244 CB FG 245 FG 245 C FG 250 FG 250 C FG 250 CB FG 250 GB FG 250A FG 250A C FG 250A GB FG 252 FG 253 FG 253 C FG 254 FG 254 C FG 254 GB FG 255 FG 255 C FG 255 CB FG 255 GB FG 255A FG 255A C FG 255A GB FG 256 FG 256 C FG 257 FG 257 C FG 257 GB FG 257S FG 257S C FG 258 FG 258 C FG 258 CB

足72

ISO Code 314 198 524 018 314 198 534 018 314 198 544 019 314 198 514 018 314 199 524 018 314 199 534 018 314 199 544 019 314 199 514 017 314 199 524 022 314 199 534 022 314 199 544 023 314 199 514 021 314 199 524 026 314 199 534 026 314 199 544 027 314 199 514 025 314 199 524 023 314 199 534 023 314 199 544 024 314 039 524 037 314 039 534 037 314 039 544 038 314 033 524 021 314 033 534 021 314 109 524 016 314 109 534 016 314 109 544 017 314 033 524 027 314 033 534 027 314 277 524 023 314 277 534 023 314 277 544 024 314 277 514 023 314 277 524 018 314 277 534 018 314 277 514 018 314 257 524 016 314 257 524 014 314 257 534 014 314 257 524 012 314 257 534 012 314 257 514 012 314 257 524 023 314 257 534 023 314 257 544 024 314 257 514 022 314 257 524 018 314 257 534 018 314 257 514 018 314 277 524 012 314 277 534 012 314 277 524 018 314 277 534 018 314 277 514 018 314 277 524 014 314 277 534 014 314 277 524 023 314 277 534 023 314 277 544 024

Shape 856 856 856 856 850 850 850 850 850 850 850 850 850 850 850 850 850L 850L 850L 811L 811L 811L 899 899 835 835 835 899 899 379 379 379 379 379 379 379 368 368 368 368 368 368 368 368 368 368 368 368 368 379 379 379 379 379 379 379 379 379 379

Page 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 27 27 27 27 27 12 12 12 27 27 26 26 26 26 26 26 26 25 25 25 25 25 25 25 25 25 25 25 25 25 26 26 26 26 26 26 26 26 26 26

Intensiv Code FG 258 GB FG 259 FG 259 C FG 259 CB FG 259 GB FG 274 FG 274 C FG 274 GB FG 274N FG 274N C FG 274N GB FG 285L FG 285L C FG 285L CB FG 30 FG 300 FG 30D2 FG 30D3 FG 30D4 FG 30D6 FG 30D14 FG 30D34 FG 300 C FG 300S FG 301 FG 301 C FG 301 CB FG 301S FG 301S C FG 302 FG 302 C FG 302 CB FG 303 FG 303S FG 304 FG 304 C FG 304 CB FG 304 GB FG 3040B FG 3040SB FG 305 FG 305 C FG 305 CB FG 305 GB FG 305L FG 305L C FG 305L GB FG 305S FG 305S C FG 306 FG 306 C FG 306 GB FG 306S FG 307 FG 307 C FG 307 CB FG 307L FG 307L C FG 307L CB

ISO Code 314 277 514 023 314 277 524 033 314 277 534 033 314 277 544 034 314 277 514 031 314 274 524 016 314 274 534 016 314 274 514 016 314 274 524 021 314 274 534 021 314 274 514 021 314 248 524 014 314 248 534 014 314 248 544 015 314 167 524 012 314 002 524 012 314 165 514 011 314 167 514 011 314 166 514 015 314 199 514 014 314 165 514 013 314 166 514 013 314 002 534 012 314 002 524 009 314 002 524 018 314 002 534 018 314 002 544 020 314 002 524 014 314 002 534 014 314 019 524 012 314 019 534 018 314 019 544 019 314 032 524 020 314 032 524 016 314 109 524 022 314 109 534 022 314 109 544 023 314 109 514 021 314 290 514 014 314 290 514 010 314 140 524 012 314 140 534 012 314 140 544 013 314 140 514 012 314 142 524 012 314 142 534 012 314 142 514 012 314 140 524 010 314 140 534 010 314 288 524 010 314 288 534 010 314 288 514 010 314 287 524 009 314 141 524 016 314 141 534 016 314 141 544 017 314 142 524 016 314 142 534 016 314 142 544 017

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

Shape 379 379 379 379 379 390 390 390 390 390 390 861 861 861 859 802 858 859 859 850 858 859 802 802 802 802 802 802 802 806 806 806 813 813 835 835 835 835 879 879 880 880 880 880 882 882 882 880 880 877 877 877 876 881 881 881 882 882 882

Page 26 26 26 26 26 27 27 27 27 27 27 17 17 17 49 9 23 24 24 22 23 24 9 9 9 9 9 9 9 9 9 9 9 9 12 12 12 12 16 16 14 14 14 14 15 15 15 14 14 16 16 16 15 14 14 14 15 15 15

FG Intensiv Code FG 307L GB FG 307N FG 307N C FG 307N CB FG 307N GB FG 308 FG 308 C FG 308 CB FG 308 GB FG 308S FG 309 FG 309 C FG 309 GB FG 31 FG 310 FG 310 C FG 310 CB FG 310 GB FG 311 FG 311 C FG 311 CB FG 311 GB FG 3113NR FG 3113R FG 3116 FG 3117 FG 311S FG 311S C FG 312 FG 312 C FG 312 CB FG 312N FG 312N C FG 312N CB FG 313 FG 313 C FG 314 FG 314 C FG 314 CB FG 314L FG 314L C FG 314S FG 314S C FG 315 FG 315 C FG 315 CB FG 315 GB FG 315L FG 315L C FG 315L CB FG 315L GB FG 315S FG 315S C FG 315S CB FG 315S GB FG 316 FG 316 C FG 316N FG 316S

FG ISO Code 314 142 514 016 314 142 524 014 314 142 534 014 314 142 544 015 314 142 514 014 314 289 524 012 314 289 534 012 314 289 544 013 314 289 514 011 314 289 524 010 314 141 524 010 314 141 534 010 314 141 514 010 314 111 524 012 314 290 524 012 314 290 534 012 314 290 544 013 314 290 514 012 314 249 524 016 314 249 534 016 314 249 544 017 314 249 514 016 314 546 514 022 314 545 514 016 314 172 514 010 314 172 514 013 314 249 524 014 314 249 534 014 314 249 524 018 314 249 534 018 314 249 544 019 314 250 524 018 314 250 534 018 314 250 544 019 314 170 524 018 314 170 534 018 314 111 524 014 314 111 534 014 314 111 544 015 314 112 524 016 314 112 534 016 314 111 524 012 314 111 534 012 314 141 524 020 314 141 534 020 314 141 544 021 314 141 514 020 314 141 524 020 314 141 534 020 314 141 544 021 314 141 514 020 314 141 524 014 314 141 534 014 314 141 544 016 314 141 514 014 314 019 524 012 314 019 534 012 314 019 524 008 314 019 524 007

Shape 882 882 882 882 882 878 878 878 878 878 881 881 881 837 879 879 879 879 862 862 862 862 847KR 846KR 847 847 862 862 862 862 862 863 863 863 845 845 837 837 837 837L 837L 837 837 881 881 881 881 881 881 881 881 881 881 881 881 806 806 806 806

Page 15 15 15 15 15 16 16 16 16 16 14 14 14 49 16 16 16 16 18 18 18 18 21 20 20 20 18 18 18 18 18 18 18 18 19 19 13 13 13 13 13 13 13 14 14 14 14 14 14 14 14 14 14 14 14 9 9 9 9

Intensiv Code FG 318 FG 318 C FG 319 FG 319 C FG 3124L FG 32 FG 3200 FG 3200S FG 3201 FG 3205 FG 3205L FG 320S FG 320S C FG 320S CB FG 3218 FG 3219 FG 321 FG 321 C FG 3223 FG 3224 FG 3225 FG 3233 FG 3236 FG 325 FG 325 C FG 325 CB FG 3250 FG 3255 FG 3258 FG 3259 FG 3274 FG 33 FG 3305 L FG 3311 FG 3315L FG 3323 FG 3388 FG 34 FG 3400 FG 3400N FG 3400S FG 3414 FG 3425 FG 3427 FG 3510 FG 3513 FG 3513N FG 3514 FG 3517 FG 3525 FG 3526 FG 3614 FG 3614B FG 366 FG 366 C FG 366 CB FG 3710B FG 3712B FG 3714B

ISO Code 314 494 524 010 314 494 534 010 314 494 524 012 314 494 534 012 314 131 514 015 314 290 524 012 314 001 514 010 314 001 514 008 314 001 514 017 314 247 514 012 314 248 514 010 314 494 524 016 314 494 534 016 314 494 544 017 314 235 514 009 314 235 514 011 314 141 524 011 314 141 524 012 314 236 514 012 314 236 514 009 314 236 514 010 314 199 514 010 314 199 514 016 314 141 524 018 314 141 534 018 314 141 544 019 314 277 514 021 314 257 514 021 314 277 514 022 314 277 514 029 314 274 514 014 314 142 524 012 314 142 514 011 314 249 514 014 314 141 514 016 314 236 514 015 314 289 514 013 314 257 524 023 314 001 514 024 314 001 514 023 314 001 514 022 314 157 514 011 314 545 514 012 314 546 514 014 314 157 514 009 314 545 514 016 314 546 514 022 314 157 514 011 314 546 514 016 314 545 514 018 314 546 514 018 314 158 514 012 314 158 514 014 314 288 524 012 314 288 534 012 314 288 544 013 314 156 514 010 314 158 514 010 314 156 514 014

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

Shape 830A 830A 830A 830A 885 879 801 801 801 860 861 830A 830A 830A 830 830 881 881 830L 830L 830L 850 850 881 881 881 379 368 379 379 390 882 882 862 881 830L 878 368 801 801 801 836KR 846KR 847KR 836KR 846KR 847KR 836KR 847KR 846KR 847KR 837KR 837KR 877 877 877 836KR 837KR 836KR

Page 11 11 11 11 15 49 8 8 8 17 17 11 11 11 10 10 14 14 11 11 11 22 22 14 14 14 26 25 26 26 27 49 15 18 14 11 16 49 8 8 8 13 20 21 13 20 21 13 21 20 21 14 14 16 16 16 13 14 13

73

FG

FG

Intensiv Code FG 388 FG 388 C FG 388 CB FG 400 FG 400 C FG 400 CB FG 400 GB FG 400N FG 400N C FG 400N CB FG 400S FG 400S C FG 400S CB FG 400S GB FG 401 FG 401 C FG 401 CB FG 401 GB FG 402 FG 402 C FG 402 CB FG 4035 FG 4036 FG 4037 FG 4038 FG 4039 FG 404 FG 404 C FG 404 CB FG 404 GB FG 405L FG 405L C FG 405L GB FG 406 FG 406 C FG 406 GB FG 4062 FG 407R FG 407R C FG 407R GB FG 408 FG 408 C FG 408 CB FG 408 GB FG 409R FG 409R C FG 40D1 FG 40D14 FG 40D2 FG 40D3 FG 40D4 FG 40D5 FG 40D6 FG 40D7 FG 40D8 FG 40D9 FG 40D18 FG 40D21 FG 40D34

足74

ISO Code 314 289 524 014 314 289 534 014 314 289 544 015 314 001 524 027 314 001 534 028 314 001 544 028 314 001 514 027 314 001 524 025 314 001 534 026 314 001 544 026 314 001 524 023 314 001 534 024 314 001 544 024 314 001 514 023 314 001 524 036 314 001 534 036 314 001 544 037 314 001 514 036 314 010 524 018 314 010 534 018 314 010 544 019 314 466 524 015 314 111 514 010 314 290 514 011 314 142 514 011 314 257 514 021 314 139 524 014 314 139 534 149 314 139 544 015 314 139 514 014 314 250 524 012 314 250 534 012 314 250 514 012 314 288 524 014 314 288 534 014 314 288 514 014 314 297 514 014 314 544 524 016 314 544 534 016 314 544 514 016 314 289 524 016 314 289 534 016 314 289 544 017 315 289 514 015 314 544 524 018 314 544 534 018 314 699 514 010 314 165 514 013 314 165 514 011 314 167 514 011 314 166 514 015 314 173 514 014 314 199 514 014 314 197 514 023 314 197 514 015 314 699 514 008 314 198 514 016 314 213 514 021 314 166 514 013

Shape 878 878 878 801 801 801 801 801 801 801 801 801 801 801 801 801 801 801 805 805 805 833 837 879 882 368 838 838 838 838 863 863 863 877 877 877 877K 845KR 845KR 845KR 878 878 878 878 845KR 845KR 956 858 858 859 859 848 850 855 855 955 856 888 859

Page 16 16 16 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 9 9 9 28 13 16 15 49 14 14 14 14 18 18 18 16 16 16 24 20 20 20 16 16 16 16 20 20 23 23 23 24 24 19 22 21 21 23 22 18 24

Intensiv Code FG 410 FG 410 C FG 410 CB FG 410L FG 410L C FG 410L CB FG 410L GB FG 4101 FG 411 FG 4113S FG 4117S FG 411R FG 411R C FG 411R GB FG 412 FG 412 C FG 413 FG 413 C FG 413 CB FG 413 GB FG 4132 FG 4135 FG 413R FG 413R C FG 414 FG 414 C FG 416 FG 416 C FG 416 CB FG 417R FG 417R C FG 4181N FG 4182 FG 4199 FG 4200 FG 4200S FG 4201 FG 4201NL FG 4201S FG 4205 FG 4205L FG 4222 FG 4223 FG 422R FG 422R C FG 4236 FG 4238 FG 423R FG 423R C FG 423R CB FG 423R GB FG 4233 FG 4235 FG 4237 FG 4240 FG 4250 FG 4250B FG 4254 FG 4255

ISO Code 314 290 524 014 314 290 534 014 314 290 544 015 314 291 524 015 314 291 534 015 314 291 544 016 314 291 514 015 314 586 514 014 314 139 524 010 314 172 514 027 314 164 514 015 314 544 524 021 314 544 534 021 314 544 514 020 314 139 524 009 314 139 534 009 314 170 524 024 314 170 534 024 314 170 544 025 314 170 514 023 314 466 514 033 314 466 524 013 314 544 524 023 314 544 534 023 314 157 524 014 314 157 534 014 314 010 524 023 314 010 534 023 314 010 544 024 314 545 524 016 314 545 534 016 314 298 514 012 314 298 514 014 314 001 514 007 314 001 514 011 314 001 514 009 314 001 524 017 314 697 514 014 314 001 514 013 314 247 514 012 314 248 514 010 314 150 514 014 314 236 514 013 314 546 524 016 314 546 534 016 314 199 514 016 314 199 514 025 314 553 524 018 314 553 534 019 314 553 544 019 314 553 514 016 314 199 514 011 314 198 514 018 314 199 514 021 314 199 514 021 314 277 514 021 314 277 514 021 314 257 514 012 314 257 514 021

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

Shape 879 879 879 879L 879L 879L 879L 898 838 847 852 845KR 845KR 845KR 838 838 845 845 845 845 833 833 845KR 845KR 836KR 836KR 805 805 805 846KR 846KR 878K 878K 801 801 801 801 801L 801 860 861 839 830L 847KR 847KR 850 850 848KR 848KR 848KR 848KR 850 856 850 850L 379 379 368 368

Page 16 16 16 17 17 17 17 25 14 20 23 20 20 20 14 14 19 19 19 19 28 28 20 20 13 13 9 9 9 20 20 24 24 8 8 8 8 9 8 17 17 11 11 21 21 22 22 21 21 21 21 22 22 22 22 26 26 25 25

FG Intensiv Code FG 4257 FG 4258 FG 4259 FG 4274 FG 4274N FG 4305L FG 4307 FG 4307N FG 4308 FG 4310 FG 4311 FG 4310 B FG 4310S FG 4313 FG 4314 FG 4315 L FG 4315 S FG 4323 FG 4325L FG 4335 FG 4388 FG 4400 FG 4400N FG 4400S FG 4405L FG 4406B FG 4410 FG 4410L FG 4413R FG 4414 FG 4414B FG 450 Rapido FG 4505L FG 451 Rapido FG 4526 FG 4610 FG 4612 FG 466 FG 466 C FG 466 CB FG 4699 FG 505 FG 505 C FG 505 GB FG 505L FG 505L C FG 505L GB FG 5062 FG 50D14 FG 50D2 FG 50D3 FG 50D4 FG 50D6 FG 50D7 FG 50D9 FG 50D34 FG 5116N FG 5117 FG 5117S

FG ISO Code 314 277 514 017 314 277 514 022 314 277 514 029 314 274 514 014 314 274 514 020 314 142 514 011 314 141 514 016 314 142 514 013 314 289 514 011 314 290 514 011 314 249 514 015 314 290 514 013 314 536 514 011 314 170 514 016 314 111 514 012 315 141 514 016 314 141 514 014 314 236 514 015 314 158 514 013 314 465 514 314 289 514 014 314 001 514 024 314 001 514 023 314 001 514 022 314 250 514 011 314 288 514 013 314 290 514 012 314 291 514 013 314 544 514 021 314 157 514 012 314 157 514 013 314 115 524 016 314 250 514 015 314 177 524 020 314 546 514 018 314 068 514 015 314 107 514 007 314 288 524 016 314 288 534 016 314 288 544 017 314 697 514 007 314 250 524 014 314 250 534 014 314 250 514 014 314 250 524 016 314 250 534 016 314 250 514 016 314 297 504 014 314 165 504 013 314 165 504 011 314 167 504 011 314 166 504 015 314 199 504 013 314 197 504 022 314 699 504 007 314 166 504 012 314 172 504 012 314 172 504 013 314 164 504 015

Shape 379 379 379 390 390 882 881 882 878 879 862 879 874K 845 837 881 881 830L 837KR 392 878 801 801 801 863 877 879 879L 845KR 836KR 836KR 842 863 848 847KR 909 835 877 877 877 801L 863 863 863 863 863 863 877K 858 858 859 859 850 855 955 859 847 847 852

Page 26 26 26 27 27 15 14 15 16 16 18 16 15 19 13 14 14 11 14 28 16 8 8 8 18 16 16 17 20 13 13 28 18 28 21 28 12 16 16 16 9 18 18 18 18 18 18 24 23 23 24 24 22 21 23 24 20 20 23

Intensiv Code FG 513 FG 513 C FG 517 FG 517 C FG 5182 FG 5201 FG 5201S FG 5205 FG 5205L FG 5223 FG 5234 FG 5235 FG 5236 FG 5237 FG 5238 FG 5250 FG 5253 FG 5254 FG 5255 FG 5255A FG 5257 FG 5258 FG 5259 FG 5274 FG 5274N FG 5305 L FG 5308 FG 5310 FG 5311 FG 5315 FG 5315L FG 5400 FG 5400S FG 5401 FG 5405L FG 5410 FG 5410L FG 5414 FG 5417R (ex 5417) FG 5422R (ex 5422) FG 5423R (ex 5423) FG 5505L FG 5510 FG 5526 FG 5712 B FG 6S FG 712 C FG 8040 FG 8040S FG 80D3 FG 80D4 FG 8113NR FG 8113R FG 8117 FG 8200 FG 8200S FG 8201 FG 8212S FG 8218

ISO Code 314 545 524 018 314 545 534 018 314 546 524 016 314 546 534 016 314 298 504 014 314 001 504 017 314 001 504 013 314 247 504 012 314 248 504 010 314 236 504 012 314 199 504 013 314 198 504 018 314 199 504 016 314 199 504 020 314 199 544 025 314 277 504 021 314 257 504 012 314 257 504 011 314 257 504 021 314 257 504 016 314 277 504 016 314 277 504 021 314 277 504 029 314 274 504 014 314 274 504 019 314 142 504 011 314 289 504 011 314 290 504 011 314 249 504 014 314 141 504 020 315 141 504 016 314 001 504 024 314 001 504 022 314 001 504 033 314 250 504 010 314 290 504 012 314 291 504 013 314 157 504 011 314 545 504 013 314 546 504 016 314 553 504 016 314 250 504 014 314 157 504 009 314 546 504 018 314 158 504 009 314 177 524 023 314 158 534 011 314 290 524 014 314 290 524 010 314 167 524 012 314 166 524 016 314 546 524 023 314 545 524 019 314 172 524 016 314 001 524 012 314 001 524 010 314 001 524 018 314 108 524 009 314 235 524 010

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

Shape 846KR 846KR 847KR 847KR 878K 801 801 860 861 830L 850 856 850 850 850 379 368 368 368 368 379 379 379 390 390 882 878 879 862 881 881 801 801 801 863 879 879L 836KR 846KR 847KR 848KR 863 836KR 847KR 837KR 848 837KR 879 879 859 859 847KR 846KR 847 801 801 801 835 830

Page 20 20 21 21 24 8 8 17 17 11 22 22 22 22 22 26 25 25 25 25 26 26 26 27 27 15 16 16 18 14 14 8 8 8 18 16 17 13 20 21 21 18 13 21 14 28 14 16 16 24 24 21 20 20 8 8 8 12 10

75

FG

FG

Intensiv Code FG 8223 FG 8224 FG 8225 FG 8235 FG 8236 FG 8238 FG 8250 FG 8255 FG 8255A FG 8259 FG 8305LP FG 8310 FG 8325L FG 8388 FG 8400 FG 8400N FG 8406A FG 8411R FG 8414 FG 8417R (ex 8417) FG 8422R (ex 8422) FG 8423R (ex 8423) FG 8425 FG 8427 FG 8510 FG 8514 FG 8517 FG 8525 FG 8526 FG 8614 FG 8710 FG 8712 FG 8714 FG 9040 FG 92 FG 9205 FG 9223 FG 9259 FG 9274 FG 9305L FG 9400 FG 9401 FG 95 FG 95 C FG A10 FG A3 FG B1 FG B10 FG B11 FG B12 FG B2 FG B3 FG B4 FG B5 FG B6 FG B7 FG B8 FG B9 FG D1

足76

ISO Code 314 236 524 014 314 236 524 011 314 236 524 012 314 198 524 018 314 199 524 017 314 199 524 025 314 277 524 023 314 257 524 022 314 257 524 018 314 277 524 031 314 158 524 013 314 290 524 013 314 158 524 015 314 289 524 014 314 001 524 027 314 001 524 024 314 288 524 013 314 544 524 020 314 157 524 013 314 545 524 016 314 546 524 016 314 553 524 017 314 545 524 012 314 546 524 014 314 157 524 011 314 157 524 013 314 546 524 016 314 545 524 018 314 546 524 018 314 158 524 014 314 156 524 010 314 158 524 010 314 156 524 014 314 290 494 011 314 303 524 015 314 247 494 012 314 236 494 012 314 277 494 029 314 274 494 013 314 142 494 010 314 001 494 024 314 001 494 033 314 213 524 019 315 213 534 020 314 173 514 015 314 172 514 014 314 172 534 017 314 257 514 021 314 290 514 011 314 290 504 011 314 172 514 014 314 248 514 010 314 257 534 024 314 289 514 011 314 289 504 011 314 173 534 017 314 173 534 017 314 173 514 016 314 699 524 010

Shape 830L 830L 830L 856 850 850 379 368 368 379 837KR 879 837KR 878 801 801 877 845KR 836KR 846KR 847KR 848KR 846KR 847KR 836KR 836KR 847KR 846KR 847KR 837KR 836KR 837KR 836KR 879 825 860 830L 379 390 882 801 801 888 888 848 847 847 368 879 879 847 861 368 878 878 848 848 848 956

Page 11 11 11 22 22 22 26 25 25 26 14 16 14 16 8 8 16 20 13 20 21 21 20 21 13 13 21 20 21 14 13 14 13 16 28 17 11 26 27 15 8 8 18 18 19 20 45 45 45 45 20 45 45 45 45 45 45 19 23

Intensiv Code FG D1 GB FG D11 FG D14 FG D14 C FG D14 GB FG D16 FG D16 C FG D16 GS FG D16 CB FG D17 FG D17 C FG D17 CB FG D18 FG D18 C FG D18 CB FG D18 GB FG D2 FG D2 GB FG D20 FG D20 C FG D20 CB FG D21 FG D21 C FG D21 CB FG D3 FG D3 C FG D3 GB FG D34 FG D34 C FG D4 FG D4 C FG D4 GB FG D5 FG D5 C FG D5 CB FG D5 GB FG D6 FG D6 C FG D6 CB FG D6 GB FG D7 FG D7 C FG D7 CB FG D7 GB FG D8 FG D8 C FG D8 CB FG D8 GB FG D9 FG D9 C FG D9 GB FG S12 Pilot FG S4 Pilot FG S8 Pilot

ISO Code 314 699 514 010 314 165 524 010 314 165 524 014 314 165 534 014 314 165 514 014 314 197 524 012 314 197 534 012 314 197 514 012 314 197 544 013 314 197 524 014 314 197 534 014 314 197 544 015 314 198 524 016 314 198 534 016 314 198 544 017 314 198 514 016 314 165 524 012 314 165 514 012 314 213 524 023 314 213 534 023 314 213 544 024 314 213 524 023 314 213 534 023 314 213 544 024 314 167 524 012 314 167 534 013 314 167 514 012 314 166 524 014 314 166 534 014 314 166 524 016 314 166 534 016 314 166 514 016 314 173 524 016 314 173 534 016 314 173 544 017 314 173 514 016 314 199 524 016 314 199 534 016 314 199 544 017 314 199 514 016 314 197 524 025 314 197 534 025 314 197 544 026 314 197 514 024 314 197 524 016 314 197 534 016 314 197 544 018 314 197 514 016 314 699 524 010 314 699 534 011 314 699 514 010 314 552 524 035 314 552 524 019 314 552 524 027

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

Shape 956 858 858 858 858 855 855 855 855 855 855 855 856 856 856 856 858 858 888 888 888 888 888 888 859 859 859 859 859 859 859 859 848 848 848 848 850 850 850 850 855 855 855 855 855 855 855 855 955 955 955 834 834 834

Page 23 23 23 23 23 21 21 21 21 21 21 21 22 22 22 22 23 23 18 18 18 18 18 18 24 24 24 24 24 24 24 24 19 19 19 19 22 22 22 22 21 21 21 21 21 21 21 21 23 23 23 28 28 28

FGL Intensiv Code FGL 200 FGL 200 C FGL 201 FGL 201 C FGL 201N FGL 201N C FGL 201S FGL 201S C FGL 206 FGL 206 C FGL 255 FGL 255 C FGL 258 FGL 258 C

FGM ISO Code 315 001 524 012 315 001 534 012 315 001 524 018 315 001 534 018 315 001 524 016 315 001 534 016 315 001 524 014 315 001 534 014 315 170 524 012 315 170 534 012 315 257 524 023 315 257 534 023 315 277 524 023 315 277 534 023

Shape 801 801 801 801 801 801 801 801 845 845 368 368 379 379

Page 8 8 8 8 8 8 8 8 19 19 25 25 26 26

Intensiv Code FGM 114 FGM 114 C FGM 116 FGM 116 C FGM 117 FGM 117 C FGM 117 GB FGM 124 FGM 124 C FGM 124 GB FGM 19 FGM 199 FGM 200 FGM 200 C FGM 200S FGM 201 FGM 201 C FGM 201 GB FGM 201S FGM 201S C FGM 202 FGM 202 C FGM 204 FGM 204 C FGM 204 GB FGM 205 FGM 205 C FGM 205 CB FGM 205 GB FGM 205L FGM 205L C FGM 205L CB FGM 205L GB FGM 206 FGM 206 C FGM 206 GB FGM 210 FGM 210 C FGM 210 GB FGM 212 FGM 212 C FGM 212 GB FGM 214 FGM 214 C FGM 214 GB FGM 216 FGM 216 C FGM 216N FGM 218 FGM 219 FGM 219 C FGM 220 FGM 220 C FGM 220 CB FGM 220 GB FGM 254 FGM 254 C FGM 254 GB FGM 255

ISO Code 313 110 524 014 313 110 534 014 313 172 524 012 313 172 534 012 313 172 524 016 313 172 534 016 313 172 514 016 313 129 524 012 313 129 534 012 313 129 514 012 313 219 524 012 313 001 524 007 313 001 524 012 313 001 534 012 313 001 524 009 313 001 524 018 313 001 534 018 313 001 514 017 313 001 524 014 313 001 534 014 313 010 524 016 313 010 524 016 313 109 524 014 313 109 534 014 313 109 514 014 313 247 524 014 313 247 534 014 313 247 544 015 313 247 514 014 313 248 524 012 313 248 534 012 313 248 544 013 313 248 514 012 313 170 524 012 313 170 534 012 313 170 514 012 313 108 524 010 313 108 534 010 313 108 514 010 313 109 524 009 313 109 534 009 313 109 514 009 313 109 524 012 313 109 534 012 313 109 514 012 313 010 524 012 313 010 524 012 313 010 524 009 313 237 524 010 313 237 524 012 313 237 534 012 313 237 524 018 313 237 534 018 313 237 544 020 313 237 514 018 313 257 524 012 313 257 534 012 313 257 514 012 313 257 524 023

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

Shape 836 836 847 847 847 847 847 885 885 885 851 801 801 801 801 801 801 801 801 801 805 805 835 835 835 860 860 860 860 861 861 861 861 845 845 845 835 835 835 835 835 835 835 835 835 805 805 805 830R 830R 830R 830R 830R 830R 830R 368 368 368 368

Page 13 13 20 20 20 20 20 15 15 15 23 8 8 8 8 8 8 8 8 8 9 9 12 12 12 17 17 17 17 17 17 17 17 19 19 19 12 12 12 12 12 12 12 12 12 9 9 9 10 10 10 10 10 10 10 25 25 25 25

77

FGM Intensiv Code FGM 255 C FGM 255 CB FGM 255 GB FGM 300 FGM 300 C FGM 300S FGM 305 FGM 305 C FGM 305 GB FGM 308 FGM 308 C FGM 308 GB FGM 315S FGM 315S C FGM 315S CB FGM 315S GB FGM 316 FGM 316 C FGM 316N FGM D16 FGM D16 C FGM D16 GB FGM D16 CB FGM D18 FGM D18 C FGM D18 CB FGM D18 GB FGM D2 FGM D2 GB FGM D7 FGM D7 CB FGM D8 FGM D8 C FGM D8 CB FGM D8 GB

足78

RA ISO Code 312 257 534 023 313 257 544 024 313 257 514 022 313 002 524 012 313 002 534 012 313 002 524 009 313 140 524 019 313 140 534 010 313 140 514 010 313 289 524 012 313 289 534 012 313 289 514 011 313 141 524 014 313 141 534 014 313 141 544 016 313 141 514 014 313 019 524 012 313 019 534 012 313 019 524 008 313 197 524 012 315 197 534 012 313 197 514 012 313 197 544 013 313 198 524 016 313 198 534 016 313 198 544 017 313 198 514 016 313 165 524 012 313 165 514 012 313 197 524 025 313 197 544 026 313 197 524 016 313 197 534 016 313 197 544 018 313 197 514 016

Shape 368 368 368 802 802 802 880 880 880 878 878 878 881 881 881 881 806 806 806 855 855 855 855 856 856 856 856 858 858 855 855 855 855 855 855

Page 25 25 25 9 9 9 14 14 14 16 16 16 14 14 14 14 9 9 9 21 21 21 21 22 22 22 22 23 23 21 21 21 21 21 21

Intensiv Code RA 415/3 Perio RA 440/3 Perio RA 475/3 Perio RA 515/3 Perio RA 540/3 Perio RA 575/3 Perio RA 615/3 Perio RA 640/3 Perio RA 675/3 Perio RA 715/3 Perio RA 740/3 Perio RA 775/3 Perio RA 113 RA 113A RA 114 RA 116 RA 117 RA 117S RA 11A RA 130 RA 19 RA 199 RA 19L RA 200 RA 200S RA 201 RA 201S RA 202 RA 204 RA 205 RA 205 GB RA 205L RA 205L GB RA 206 RA 208 RA 210 RA 212 RA 212S RA 214 RA 216 RA 216N RA 219 RA 220 RA 221 RA 223 RA 236 RA 250 RA 254 RA 255 RA 255 GB RA 255A RA 258 RA 274 RA 30 RA 305L RA 308 RA 31 RA 310 RA 311

ISO Code Shape 204 268 504 012 204 268 514 013 204 268 524 014 204 267 504 012 204 267 514 013 204 267 524 014 204 259 504 014 204 259 514 014 204 259 524 016 204 258 504 014 204 258 514 014 204 259 524 016 204 171 524 018 846 204 164 524 018 852 204 110 524 014 836 204 172 524 012 847 204 172 524 016 847 204 164 524 016 852 204 068 524 039 909 204 040 524 035 815 204 219 524 012 851 204 001 524 007 801 204 220 524 017 857 204 001 524 012 801 204 001 524 009 801 204 001 524 018 801 204 001 524 014 801 204 010 524 016 805 204 109 524 014 835 204 247 524 014 860 204 247 514 014 860 204 248 524 012 861 204 248 514 012 861 204 170 524 012 845 204 170 524 014 845 204 108 524 010 835 204 109 524 009 835 204 108 524 019 835 204 109 524 012 835 204 010 524 012 805 204 010 524 009 805 204 237 524 012 830R 204 237 524 018 830R 204 150 524 011 839 204 238 524 014 830RL 204 199 524 018 850 204 277 524 023 379 204 257 524 012 368 204 257 524 023 368 204 257 514 022 368 204 257 524 018 368 204 277 524 023 379 204 274 524 016 390 204 167 524 012 859 204 142 524 012 882 204 289 524 012 878 204 111 524 012 837 204 290 524 012 879 204 249 524 016 862

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

Page 54 54 54 54 54 54 54 54 54 54 54 54 19 23 13 20 20 23 28 27 23 8 23 8 8 8 8 9 12 17 17 17 17 19 19 12 12 12 12 9 9 10 10 11 11 22 26 25 25 25 25 26 27 24 15 16 49 16 18

RA

RA

Intensiv Code

ISO Code

Shape

Page

RA 314 RA 314S RA 315S RA 32 RA 3201 RA 3205 RA 3223 RA 3236 RA 3250 RA 3274 RA 33 RA 34 RA 400 RA 400 C RA 400 GB RA 400S RA 401 RA 401 GB RA 4035 RA 4036 RA 4037 RA 4038 RA 4039 RA 404 RA 405L RA 4062 RA 40D4 RA 40D9 RA 4201 RA 4205 RA 4205L RA 4223 RA 4236 RA 4250 RA 4255 RA 4274 RA 4305L RA 4400 RA 5062 RA 50D4 RA 50D9 RA 5201 RA 5205 RA 5205L RA 5223 RA 5236 RA 5250 RA 5255 RA 5274 RA 5400 RA 95 RA D1 RA D1 GB RA D11 RA D16 RA D18 RA D2 RA D2 GB RA D21

204 111 524 014 204 111 524 012 204 141 524 014 204 290 524 012 204 001 514 017 204 247 514 012 204 235 514 012 204 199 514 016 204 277 514 021 204 274 514 014 204 142 524 012 204 257 524 023 204 001 524 027 204 001 534 028 204 001 514 027 204 001 524 023 204 001 524 036 204 001 514 036 204 466 514 015 204 111 514 010 204 290 514 011 204 142 514 011 204 257 514 021 204 139 524 014 204 250 524 012 204 297 504 014 204 166 514 015 204 699 514 010 204 001 514 017 204 247 514 012 204 248 514 010 204 235 514 013 204 199 514 016 204 277 514 021 204 257 514 021 204 274 514 014 204 142 514 011 204 001 514 024 204 297 504 014 204 166 504 015 204 699 504 010 204 001 504 017 204 247 504 012 204 248 504 010 204 235 504 012 204 199 504 016 204 277 504 021 204 257 504 021 204 274 504 014 204 001 504 024 204 248 524 018 204 699 524 010 204 699 514 010 204 165 524 010 204 197 524 012 204 198 524 016 204 165 524 012 204 165 514 012 204 213 524 023

837 837 881 879 801 860 830L 850 379 390 882 368 801 801 801 801 801 801 833 837 879 882 368 838 863 877K 859 955 801 860 861 830L 850 379 368 390 882 801 877K 859 955 801 860 861 830L 850 379 368 390 801 861 956 956 858 855 856 858 858 888

13 13 14 49 8 17 11 22 26 27 49 49 8 8 8 8 8 8 28 13 16 15 49 14 18 24 24 23 8 17 17 11 22 26 25 27 15 8 24 24 23 8 17 17 11 22 26 25 27 8 17 23 23 23 21 22 23 23 18

Intensiv Code

ISO Code

RA D22 RA D3 RA D4 RA D4 GB RA D5 RA D6 RA D8 RA D9

205 213 524 014 204 167 524 012 204 166 524 016 204 166 514 016 204 173 524 016 204 199 524 016 204 197 524 016 204 699 524 010

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

Shape

Page

888 859 859 859 848 850 855 955

24 24 23 19 22 21 23

79

Contact

Fax

+41 91 986 50 59 E-Mail

info@intensiv.ch Please indicate here below the products about which you would like to get more information:

Sender

Order Please send this order by fax at +41 91 986 50 59 or by e-mail at order@intensiv.ch

Ref.

足80

Quantity

Remarks

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | info@intensiv.ch

P001E Edition April 2010

Intensiv SA Via al Molino 107 P. O. Box 741 6926 Montagnola Switzerland

Tel. +41 91 986 50 50 Fax +41 91 986 50 59 info@intensiv.ch www.intensiv.ch